#ifndef __CA_CSG_H__ #define __CA_CSG_H__ #ifdef CFG_DEV_TYPE_LAND_CA /* Includes ------------------------------------------------------------------*/ #include "ca_main.h" #include #include /* Define --------------------------------------------------------------------*/ #define CSG_PKT_LEN (2048) #define GATEWAY_LEN (4) #define START_FLAG (0X5555AAAA) #define END_FLAG (0X5AA55AA5) #define LandPackHeadTailLen (28) //包头加包尾长度 #define Cmd_ForceReqID (0xA401)//强制请求从机的信息（ID）：【不判断ID匹配，用于识别ID】 #define Res_ForceReqID (0xC401) #define Cmd_ReqRTD2 (0xA081)//召唤业务数据 #define Res_ReqRTD2 (0xC081) #define Cmd_ReqUTC (0xA090)//查询下位机时间 #define Res_ReqUTC (0xC090) #define Cmd_SetUTC (0xA091)//设置下位机时间 #define Res_SetUTC (0xC091) #define Cmd_ReadRTD_Flash2 (0xA094)//读最近的N条RTD数据 #define Res_ReadRTD_Flash2 (0xC094) #define Cmd_ReadRTD_FlashLoss2 (0xA095)//读最近的N条RTD数据 #define Res_ReadRTD_FlashLoss2 (0xC095) #define Cmd_ReqEarthBoxRTD (0xA083) //接地箱实时数据 #define Res_ReqEarthBoxRTD (0xC083) // #define Cmd_SwitchOutPut (0xA084) //控制继电器输出 #define Res_SwitchOutPut (0xC084) #define Cmd_LfManualWaveTrig (0xA071)//手动触发工频录波 #define Res_LfManualWaveTrig (0xC071) #define Cmd_ReqLfRecWaveStatus (0xA072)//召唤工频录波的全部数据（分包送所有包） #define Res_ReqLfRecWaveStatus (0xC072) #define Cmd_ReqLfRecWaveLoss (0xA073)//工频录波的数据补包 #define Res_ReqLfRecWaveLoss (0xC073) #define Cmd_ReqSysCfg (0xA074)//查询装置系统配置 #define Res_ReqSysCfg (0xC074) #define Cmd_SetSysCfg (0xA075)//设置装置系统配置 #define Res_SetSysCfg (0xC075) #define Cmd_ReqDevCfg (0xA076)//查询装置设备配置 #define Res_ReqDevCfg (0xC076) #define Cmd_SetDevCfg (0xA077)//设置装置设备配置 #define Res_SetDevCfg (0xC077) #define Cmd_ReqCauCfg (0xA078)//查询装置CAU配置 #define Res_ReqCauCfg (0xC078) #define Cmd_SetCauCfg (0xA079)//设置装置CAU配置 #define Res_SetCauCfg (0xC079) #define Cmd_CameraTrig (0xA07a)//手动触发摄像头拍照 #define Res_CameraTrig (0xC07a) #define Cmd_ReqPhotePack (0xA07b)//召唤照片数据 #define Res_ReqPhotePack (0xC07b) #define Cmd_ReqPhotePackLoss (0xA07c)//召唤照片数据 #define Res_ReqPhotePackLoss (0xC07c) #define Cmd_Reboot (0xA07E)//重启 #define Res_Reboot (0xC07E) #define Cmd_AppUpdate (0xA07F)//升级 #define Res_AppUpdate (0xC07F) #define Cmd_HfManualWaveTrig (0xA098)//手动触发高频采集 #define Res_HfManualWaveTrig (0xC098) #define Cmd_ReqHfRecWaveStatus (0xA099)//查询高频采集的完成状态 【朗德上送废弃】 #define Res_ReqHfRecWaveStatus (0xC099) #define Cmd_ReqFfRecWaveFull (0xA09a)//召唤高频采集的全部数据（连续发送所有包） #define Res_ReqFfRecWaveFull (0xC09a) #define Cmd_ReqFfRecWaveLoss (0xA09b)//召唤高频采集的补报（连续发送所请求的N包） #define Res_ReqFfRecWaveLoss (0xC09b) /* Exported types ------------------------------------------------------------*/ typedef struct{ U32 Head;//StartFlag1 0X5555AAAA U16 Len;//报文长度：所有字节总长度 U16 Type;//报文类型 U32 ID;//从机ID: 【ex. 0x40111234 】 U32 LifeCnt;//主机每次加1，从机应答收到的值 U16 gNum;//报文分组数目:（1-65535）； U16 gNumIndex;//报文分组编号；0 ～ （gNum－1） }LandPkHead;//朗德协议包头 typedef struct{ U32 CheckSum; U32 EndFlag1; }LandPkTail;//朗德协议包尾 typedef struct { int fd; // 后台通讯使用的 socket. uint32_t pkt_index; // 报文索引. int32_t data_fifo_id; // 数据处理线程发向后台发送线程的 fifo. char buf_send[CSG_PKT_LEN]; //char buf_reply[CSG_PKT_LEN]; char buf_recv[CSG_PKT_LEN]; char buf[CSG_PKT_LEN]; struct sockaddr_in server; int32_t server_ip; // server ip. uint16_t server_port; // server port. uint8_t is_connect; // 是否连接上服务器. uint8_t heartbeat; // 心跳发送后没有收到回复的次数. int32_t communication_time; // 最后通讯时间. pthread_mutex_t mutex; } csg_t; /* Exported macro ------------------------------------------------------------*/ /* Extern global variables ---------------------------------------------------*/ extern csg_t csg; /* Extern functions ----------------------------------------------------------*/ extern int32_t csg_handle_init(void); #endif #endif