/***************************************************************************** * file include/pd_main.h * author YuLiang * version 1.0.0 * date 07-Feb-2023 * brief This file provides all the headers of the partial discharge functions. ****************************************************************************** * Attention * *

© COPYRIGHT(c) 2021 LandPower

* * Redistribution and use in source and binary forms, with or without modification, * are permitted provided that the following conditions are met: * 1. Redistributions of source code must retain the above copyright notice, * this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright notice, * this list of conditions and the following disclaimer in the documentation * and/or other materials provided with the distribution. * 3. Neither the name of LandPower nor the names of its contributors may be used to * endorse or promote products derived from this software without specific * prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * ******************************************************************************/ #ifndef __PD_MAIN_H__ #define __PD_MAIN_H__ #ifdef CFG_DEV_TYPE_LAND_PD /* Includes ------------------------------------------------------------------*/ #include "cmd.h" /* Define --------------------------------------------------------------------*/ #define PD_DAU_SUM 1 #define PD_DAU_PORT_SUM 8 #define PD_PORT_PROMPT_LEN 64 // DAU 端口节点前标长度. #define PD_DEV_NUM_LEN 16 #define PD_DEV_TYPE_LEN 8 #define PD_DAU_5GAD_DATA_NUM 20000 #define HARDWARE_VERSON "DAU5G_1.0" #define PD_BIT_PT 0 #define PD_BIT_BCODE 1 /* Exported types ------------------------------------------------------------*/ /* 用于命令行模式节点注册配置保存函数 */ typedef int pd_port_cmd_save_config_f(vty_t*, uint8_t, uint8_t); /* 端口类型. */ typedef enum { PD_PORT_TYPE_UHF = 1, PD_PORT_TYPE_COUNT } PD_PORT_TYPE_E; /* 端口节点配置优先级 */ typedef enum { PD_PORT_CMD_PRI_DAU = 0, PD_PORT_CMD_PRI_COUNT } PD_PORT_CMD_PRI_E; /* 端口状态. */ typedef enum { PD_PORT_DISABLE = 0, PD_PORT_ENABLE , PD_PORT_STATUS_COUNT } PD_PORT_STATUS_E; /* 向服务器发送消息的类型. */ typedef enum { PD_SEND_TYPE_ORIGINAL_DATA = 1, PD_SEND_TYPE_TREND = 2, } PD_SEND_TYPE_E; typedef struct { uint32_t interrupt_count; // 通道中断计数 uint32_t single_frame_length; // 单帧波形数据长度 uint32_t frame_numbers; // 帧数 uint32_t century_second; // 采样时间世纪秒 uint32_t nano_second; // 纳秒 uint32_t total_pulse_nums; // 总放电次数 uint32_t data_vaild; // 是否有波形数据 int32_t ground_noise; // 底噪 char *original_pointer; // 原始波形数据存放位置 } pd_original_port_t; /* 趋势数据结构体 */ typedef struct { uint32_t port; uint32_t century_second; uint32_t pulse_num; int16_t pulse_max; int32_t pulse_avg; uint32_t noise; uint16_t phase; } pd_trend_port_t; typedef struct { pd_trend_port_t port[PD_DAU_PORT_SUM]; } pd_trend_t; typedef struct { pd_original_port_t pd_original_port[PD_DAU_PORT_SUM]; // 8个通道的数据 //pd_trend_t *trend; pd_trend_port_t *trend_port[PD_DAU_PORT_SUM]; } pd_data_t; typedef struct { uint32_t type; void *data; } pd_csg_msg_t; typedef struct{ uint32_t trig_gap; //阈值触发间隔 us uint32_t interrupt_interval; //中断传输间隔 us uint32_t sample_frequency; //采样频率 MHz uint32_t trigger_sample_nums; //触发采样点数 uint32_t trig_location; //预触位置 uint32_t trig_threshold; //触发电平 mv uint32_t irigB_polarity; //irigB极性 uint32_t pt_B_sync_mode; //pt和B码同步模式bit0-1 uint32_t pt_internal_period; //pt内同步周期 uint32_t trend_up_period; //趋势上升周期 uint16_t heartbeat_period; //心跳包周期 s uint16_t ch_en_mask; //通道使能 bit0-7对应ch1-ch8 } pd_config_global_t; /* 端口配置. */ typedef struct { uint8_t vport; // 通道编号. uint8_t is_enbale; // 通道是否使能 uint8_t type; // 通道类型. uint8_t send_port_num; // 发送通道编号. uint32_t filter_frequency; // 过滤频率(32位按位设置) int16_t rise_time; // 上升时间(10%到90%峰值) int16_t peak_time; // 峰值时间 int16_t fall_time; // 下降时间(90%到10%峰值) int16_t pulse_width; // 脉冲宽度 int16_t peak_count; // 波峰数量 int16_t reserved2; // 保留字段(2字节) int32_t signal_envelope; // 信号包络面 float signal_mean; // 信号平均值 float signal_variance; // 信号方差值 int32_t primary_frequency; // 第一主频 int16_t primary_freq_peak; // 第一主频峰值 int16_t spectral_peak_count; // 谱峰个数 float spectrum_mean; // 频谱均值 float spectrum_variance; // 频谱方差值 uint8_t reserved3[32]; // 预留字段(32字节) } pd_config_port_t; typedef struct { pd_config_global_t config; // 全局配置 pd_config_port_t config_port[PD_DAU_SUM][PD_DAU_PORT_SUM]; // 端口配置 } pd_config_t; typedef struct { uint8_t state; uint8_t sync; } pd_state_t; /* Exported macro ------------------------------------------------------------*/ /* Extern global variables ---------------------------------------------------*/ extern pd_data_t pd_data; extern pd_config_t pd_config; extern pd_state_t pd_state; extern cmd_node_t pd_port_node; /* Extern functions ----------------------------------------------------------*/ extern int32_t pd_main(void); extern int32_t pd_main_after(void); extern int32_t pd_port_cmd_config_register(int32_t pri, pd_port_cmd_save_config_f *func); extern void pd_show(void); extern uint32_t _pd_get_frequency(); #endif #endif /************************ (C) COPYRIGHT LandPower ***** END OF FILE ****/