You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

182 lines
6.6 KiB
C

/*****************************************************************************
* file include/pd_main.h
* author YuLiang
* version 1.0.0
* date 07-Feb-2023
* brief This file provides all the headers of the partial discharge functions.
******************************************************************************
* Attention
*
* <h2><center>&copy; COPYRIGHT(c) 2021 LandPower</center></h2>
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of LandPower nor the names of its contributors may be used to
* endorse or promote products derived from this software without specific
* prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************/
#ifndef __PD_MAIN_H__
#define __PD_MAIN_H__
#ifdef CFG_DEV_TYPE_LAND_PD
/* Includes ------------------------------------------------------------------*/
#include "cmd.h"
/* Define --------------------------------------------------------------------*/
#define PD_DAU_SUM 1
#define PD_DAU_PORT_SUM 8
#define PD_PORT_PROMPT_LEN 64 // DAU 端口节点前标长度.
#define PD_DEV_NUM_LEN 16
#define PD_DEV_TYPE_LEN 8
#define PD_DAU_5GAD_DATA_NUM 20000
#define HARDWARE_VERSON "DAU5G_1.0"
#define PD_BIT_PT 0
#define PD_BIT_BCODE 1
/* Exported types ------------------------------------------------------------*/
/* 用于命令行模式节点注册配置保存函数 */
typedef int pd_port_cmd_save_config_f(vty_t*, uint8_t, uint8_t);
/* 端口类型. */
typedef enum
{
PD_PORT_TYPE_UHF = 1,
PD_PORT_TYPE_COUNT
} PD_PORT_TYPE_E;
/* 端口节点配置优先级 */
typedef enum
{
PD_PORT_CMD_PRI_DAU = 0,
PD_PORT_CMD_PRI_COUNT
} PD_PORT_CMD_PRI_E;
/* 端口状态. */
typedef enum
{
PD_PORT_DISABLE = 0,
PD_PORT_ENABLE ,
PD_PORT_STATUS_COUNT
} PD_PORT_STATUS_E;
/* 向服务器发送消息的类型. */
typedef enum
{
PD_SEND_TYPE_ORIGINAL_DATA = 1,
PD_SEND_TYPE_TREND = 2,
} PD_SEND_TYPE_E;
typedef struct {
uint32_t interrupt_count; // 通道中断计数
uint32_t single_frame_length; // 单帧波形数据长度
uint32_t frame_numbers; // 帧数
uint32_t century_second; // 采样时间世纪秒
uint32_t nano_second; // 纳秒
uint32_t total_pulse_nums; // 总放电次数
uint32_t data_vaild; // 是否有波形数据
int32_t ground_noise; // 底噪
char *original_pointer; // 原始波形数据存放位置
} pd_original_port_t;
/* 趋势数据结构体 */
typedef struct
{
uint32_t port;
uint32_t century_second;
uint32_t pulse_num;
int16_t pulse_max;
int32_t pulse_avg;
uint32_t noise;
uint16_t phase;
} pd_trend_port_t;
typedef struct
{
pd_trend_port_t port[PD_DAU_PORT_SUM];
} pd_trend_t;
typedef struct {
pd_original_port_t pd_original_port[PD_DAU_PORT_SUM]; // 8个通道的数据
//pd_trend_t *trend;
pd_trend_port_t *trend_port[PD_DAU_PORT_SUM];
} pd_data_t;
typedef struct {
uint32_t type;
void *data;
} pd_csg_msg_t;
typedef struct{
uint32_t trig_gap; //阈值触发间隔 us
uint32_t interrupt_interval; //中断传输间隔 us
uint32_t sample_frequency; //采样频率 MHz
uint32_t trigger_sample_nums; //触发采样点数
uint32_t trig_location; //预触位置
uint32_t trig_threshold; //触发电平 mv
uint32_t irigB_polarity; //irigB极性
uint32_t pt_B_sync_mode; //pt和B码同步模式bit0-1
uint32_t pt_internal_period; //pt内同步周期
uint32_t trend_up_period; //趋势上升周期
uint16_t heartbeat_period; //心跳包周期 s
uint16_t ch_en_mask; //通道使能 bit0-7对应ch1-ch8
} pd_config_global_t;
/* 端口配置. */
typedef struct {
uint8_t vport; // 通道编号.
uint8_t is_enbale; // 通道是否使能
uint8_t type; // 通道类型.
uint8_t send_port_num; // 发送通道编号.
} pd_config_port_t;
typedef struct {
pd_config_global_t config; // 全局配置
pd_config_port_t config_port[PD_DAU_SUM][PD_DAU_PORT_SUM]; // 端口配置
} pd_config_t;
typedef struct
{
uint8_t state;
uint8_t sync;
} pd_state_t;
/* Exported macro ------------------------------------------------------------*/
/* Extern global variables ---------------------------------------------------*/
extern pd_data_t pd_data;
extern pd_config_t pd_config;
extern pd_state_t pd_state;
extern cmd_node_t pd_port_node;
/* Extern functions ----------------------------------------------------------*/
extern int32_t pd_main(void);
extern int32_t pd_main_after(void);
extern int32_t pd_port_cmd_config_register(int32_t pri, pd_port_cmd_save_config_f *func);
extern void pd_show(void);
extern uint32_t _pd_get_frequency();
#endif
#endif
/************************ (C) COPYRIGHT LandPower ***** END OF FILE ****/