ADD 1.新增FPGA升级;

CablePositioning_APP_V1.0/Core/Src/RS485_debug.c

@@ -463,6 +463,74 @@ static void _debug_pkt_update_iap(void)
     return;
 }
 
+/* 设备 FPGA 升级回复 */
+static void _debug_pkt_update_fpga(void)
+{
+    proto_head_t *head = (proto_head_t*)debug_buf.buf;
+    mul_head_t *m_head = (mul_head_t*)(debug_buf.buf + sizeof(proto_head_t));
+    uint8_t *data = (uint8_t*)(debug_buf.buf + sizeof(proto_head_t) + sizeof(mul_head_t));
+    uint32_t addr = TFTP_APP_ADDRESS;
+    uint32_t app_len = 0;
+    uint32_t *crc = NULL;
+    HAL_GPIO_WritePin(LED_RUN_GPIO_Port, LED_RUN_Pin, GPIO_PIN_SET);
+
+    /* index 为 0 表示是首保, 需要擦除 FLASH. */
+    if (0 == m_head->index)
+    {
+        while(addr != TFTP_APP_ADDRESS_END)
+        {
+            if (spi_flash_erase(addr, SPI_CMD_BLOCK64_ERASE) != HAL_OK)
+            {
+                return;
+            }
+            
+            addr += SPI_FLASH_BLOCK64_SIZE;
+        }
+    }
+    
+    /* 计算写 FLASH 地址, 并写入 FLASH. */
+    addr = TFTP_APP_ADDRESS + m_head->index * DEBUG_FLASH_BUF_SIZE;
+    if (addr >= TFTP_APP_ADDRESS_END)
+    {
+        return;
+    }
+    if (m_head->len > DEBUG_DATA_SIZE
+        || m_head->index >= 2944)
+    {
+        return;
+    }
+    else if(m_head->len > 0)
+    {
+        if (spi_flash_write(addr, data, m_head->len) != HAL_OK)
+        {
+            return;
+        }
+    }
+
+    /* 长度小于 DEBUG_FLASH_BUF_SIZE 则认为是最后一包. */
+    if(m_head->len < DEBUG_FLASH_BUF_SIZE)
+    {
+        /* 校验数据. */
+        app_len = addr - TFTP_APP_ADDRESS + m_head->len;
+        dau_ctrl.update_flag = TRUE;
+        dau_ctrl.update_len = app_len;
+        dau_ctrl.update_rt = DAU_UPD_NONE;
+    }
+
+    /* 封装报文头. */
+    _debug_pkt_head_init(sizeof(proto_head_t) + sizeof(mul_head_t), DEBUG_CT_PRV_REPLY);
+
+    /* 计算校验和. */
+    crc = (uint32_t*)(debug_buf.buf + head->len);
+    *crc = crc32(debug_buf.buf, head->len);
+
+    /* 发送报文 */
+    _debug_pkt_send(head->len + 4, 28);
+    
+    return;
+}
+
+
 /* 修改配置报文处理. */
 static void _debug_pkt_config_get(void)
 {
@@ -1578,6 +1646,30 @@ static void _debug_pkt_csg_config_set(void)
     return;
 }
 
+/* 主动上传fpga升级结果. */
+static void _debug_pkt_update_fpga_result()
+{
+    proto_head_t *head = (proto_head_t*)debug_buf.buf;
+    int32_t *res = (int32_t*)(debug_buf.buf + sizeof(proto_head_t));
+    uint32_t *crc = NULL;
+
+    /* 封装报文头. */
+    _debug_pkt_head_init(sizeof(proto_head_t) + sizeof(int32_t), DEBUG_CT_PRV_REPLY);
+    head->cmd_type = DEBUG_CT_PRV_REPLY;
+    head->cmd = DEBUG_PRV_UPDATE_RT;
+    *res = (dau_ctrl.update_rt != DAU_UPD_OK);
+
+    /* 计算校验和. */
+    crc = (uint32_t*)(debug_buf.buf + head->len);
+    *crc = crc32(debug_buf.buf, head->len);
+
+    /* 发送报文 */
+    _debug_pkt_send(head->len + 4, 20);
+    
+    return;
+}
+
+
 /* 收包报文处理. */
 static void _debug_pkt_process(void)
 {
@@ -1670,6 +1762,9 @@ static void _debug_pkt_process(void)
         case DEBUG_PRV_CSG_CONFIG_SET:
             _debug_pkt_csg_config_set();
             break;
+        case DEBUG_PRV_UPDATE_FPGA:
+            _debug_pkt_update_fpga();
+            break;
         default:
             break;
         }
@@ -1690,6 +1785,12 @@ void debug_start(void)
     {
         common_watchdog_set(COM_WDG_CLI);
 
+        if (dau_ctrl.update_rt == DAU_UPD_OK)
+        {
+            _debug_pkt_update_fpga_result();
+            dau_ctrl.update_rt = DAU_UPD_NONE;
+        }
+    
         /* 开启串口空闲中断 DMA 收包. 注意这里会收到空闲中断, DMA 收一半中断, 全收中断, 注意中断处理. */
         if (HAL_OK == HAL_UARTEx_ReceiveToIdle_DMA(debug_uart, debug_buf.buf + debug_buf.end, USART_BUF_SIZE - debug_buf.end))
         {

CablePositioning_APP_V1.0/Core/Src/cli.c

@@ -880,9 +880,9 @@ void cli_start(void const * argument)
     FLASH_If_Init();
     /* 配置系统初始化. */
     dev_config_init();
-    dev_config_flag_set(DEV_FLAG_CLI);
+    //dev_config_flag_set(DEV_FLAG_CLI);
-    //dev_config_flag_unset(DEV_FLAG_CLI);
+    dev_config_flag_unset(DEV_FLAG_CLI);
-    //dev_config_flag_set(DEV_FLAG_ADJ);
+    dev_config_flag_unset(DEV_FLAG_ADJ);
     flash_log_init();
     st_init();