From 1e4034e73a0dd40d2a7bc0f34a559e295b619549 Mon Sep 17 00:00:00 2001 From: yuliang Date: Mon, 5 Aug 2024 09:06:57 +0800 Subject: [PATCH] =?UTF-8?q?FIX=20|=20=E7=A7=BB=E6=A4=8D=E4=BF=AE=E6=94=B9.?= MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit --- .../Core/Inc/ADC_collect.h | 28 +- CablePositioning_APP_V1.0/Core/Inc/flash_if.h | 30 +- CablePositioning_APP_V1.0/Core/Inc/tim.h | 2 - .../Core/Src/ADC_collect.c | 702 +- .../Core/Src/RS485_debug.c | 15 +- CablePositioning_APP_V1.0/Core/Src/cli.c | 1 - CablePositioning_APP_V1.0/Core/Src/main.c | 1 - .../Core/Src/recording_wave.c | 3 +- .../Core/Src/stm32l4xx_it.c | 15 - CablePositioning_APP_V1.0/Core/Src/tim.c | 81 +- CablePositioning_APP_V1.0/Core/Src/wireless.c | 26 +- .../EWARM/CableMonitor_APP_V3.2.dep | 1598 +- ...or_APP_V3.2.CableMonitor_APP_V3.2.cspy.bat | 4 +- ...or_APP_V3.2.CableMonitor_APP_V3.2.cspy.ps1 | 4 +- ..._APP_V3.2.CableMonitor_APP_V3.2.driver.xcl | 2 +- ...APP_V3.2.CableMonitor_APP_V3.2.general.xcl | 12 +- .../EWARM/settings/CableMonitor_APP_V3.2.dnx | 12 +- .../EWARM/settings/Project.wsdt | 50 +- CablePositioning_IAP_V1.0/.mxproject | 4 +- .../CableMonitor_V3.2.ioc | 78 +- .../Device/ST/STM32L4xx/Include/stm32l496xx.h | 39494 ++++++++-------- .../Device/ST/STM32L4xx/Include/stm32l4xx.h | 606 +- .../ST/STM32L4xx/Include/system_stm32l4xx.h | 212 +- .../CMSIS/Device/ST/STM32L4xx/LICENSE.txt | 12 +- .../Inc/Legacy/stm32_hal_legacy.h | 8360 ++-- .../STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal.h | 1452 +- .../Inc/stm32l4xx_hal_cortex.h | 842 +- .../Inc/stm32l4xx_hal_def.h | 420 +- .../Inc/stm32l4xx_hal_dma.h | 1722 +- .../Inc/stm32l4xx_hal_dma_ex.h | 568 +- .../Inc/stm32l4xx_hal_exti.h | 1716 +- .../Inc/stm32l4xx_hal_flash.h | 2056 +- .../Inc/stm32l4xx_hal_flash_ex.h | 250 +- .../Inc/stm32l4xx_hal_flash_ramfunc.h | 148 +- .../Inc/stm32l4xx_hal_gpio.h | 646 +- .../Inc/stm32l4xx_hal_gpio_ex.h | 2119 +- .../Inc/stm32l4xx_hal_i2c.h | 1677 +- .../Inc/stm32l4xx_hal_i2c_ex.h | 368 +- .../Inc/stm32l4xx_hal_pwr.h | 822 +- .../Inc/stm32l4xx_hal_pwr_ex.h | 1858 +- .../Inc/stm32l4xx_hal_rcc.h | 9766 ++-- .../Inc/stm32l4xx_hal_rcc_ex.h | 6090 +-- .../Inc/stm32l4xx_hal_spi.h | 1706 +- .../Inc/stm32l4xx_hal_spi_ex.h | 146 +- .../Inc/stm32l4xx_hal_tim.h | 4784 +- .../Inc/stm32l4xx_hal_tim_ex.h | 878 +- .../Inc/stm32l4xx_hal_uart.h | 3598 +- .../Inc/stm32l4xx_hal_uart_ex.h | 1491 +- .../Drivers/STM32L4xx_HAL_Driver/LICENSE.txt | 12 +- .../STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.c | 1529 +- .../Src/stm32l4xx_hal_cortex.c | 1058 +- .../Src/stm32l4xx_hal_dma.c | 2348 +- .../Src/stm32l4xx_hal_dma_ex.c | 614 +- .../Src/stm32l4xx_hal_exti.c | 1270 +- .../Src/stm32l4xx_hal_flash.c | 1528 +- .../Src/stm32l4xx_hal_flash_ex.c | 2632 +- .../Src/stm32l4xx_hal_flash_ramfunc.c | 502 +- .../Src/stm32l4xx_hal_gpio.c | 1102 +- .../Src/stm32l4xx_hal_i2c.c | 14710 +++--- .../Src/stm32l4xx_hal_i2c_ex.c | 736 +- .../Src/stm32l4xx_hal_pwr.c | 1316 +- .../Src/stm32l4xx_hal_pwr_ex.c | 2948 +- .../Src/stm32l4xx_hal_rcc.c | 3878 +- .../Src/stm32l4xx_hal_rcc_ex.c | 7108 +-- .../Src/stm32l4xx_hal_spi.c | 8908 ++-- .../Src/stm32l4xx_hal_spi_ex.c | 224 +- .../Src/stm32l4xx_hal_tim.c | 15798 ++++--- .../Src/stm32l4xx_hal_tim_ex.c | 5661 ++- .../Src/stm32l4xx_hal_uart.c | 9759 ++-- .../Src/stm32l4xx_hal_uart_ex.c | 2172 +- .../EWARM/CableMonitor_V3.2.dep | 710 +- .../EWARM/CableMonitor_V3.2.ewp | 12 +- ...bleMonitor_V3.2.CableMonitor_V3.2.cspy.bat | 4 +- ...bleMonitor_V3.2.CableMonitor_V3.2.cspy.ps1 | 4 +- ...eMonitor_V3.2.CableMonitor_V3.2.driver.xcl | 2 +- ...Monitor_V3.2.CableMonitor_V3.2.general.xcl | 12 +- .../EWARM/settings/CableMonitor_V3.2.dnx | 2 +- .../EWARM/settings/Project.wsdt | 42 +- CablePositioning_IAP_V1.0/Inc/flash_if.h | 24 +- CablePositioning_IAP_V1.0/Inc/main.h | 5 +- .../Inc/stm32l4xx_hal_conf.h | 4 +- CablePositioning_IAP_V1.0/Inc/stm32l4xx_it.h | 1 - CablePositioning_IAP_V1.0/Src/common.c | 22 +- CablePositioning_IAP_V1.0/Src/flash_if.c | 12 +- CablePositioning_IAP_V1.0/Src/main.c | 122 +- CablePositioning_IAP_V1.0/Src/menu.c | 19 +- .../Src/stm32l4xx_hal_msp.c | 53 +- CablePositioning_IAP_V1.0/Src/stm32l4xx_it.c | 17 +- CablePositioning_IAP_V1.0/Src/ymodem.c | 6 +- 89 files changed, 91787 insertions(+), 91574 deletions(-) diff --git a/CablePositioning_APP_V1.0/Core/Inc/ADC_collect.h b/CablePositioning_APP_V1.0/Core/Inc/ADC_collect.h index 6c0ef93..0e1143a 100644 --- a/CablePositioning_APP_V1.0/Core/Inc/ADC_collect.h +++ b/CablePositioning_APP_V1.0/Core/Inc/ADC_collect.h @@ -66,19 +66,8 @@ typedef enum typedef struct { osThreadId_t ADCHandle; // ADC 任务句柄. - TIM_HandleTypeDef *ADC_tim; // ADC 使用的定时器句柄. - SPI_HandleTypeDef *ADC_spi; // ADC 使用的 SPI 句柄. - uint16_t ADC_cnt; // ADC 采样计数. - uint8_t ADC_state; // ADC 采样状态. - uint8_t ADC_err_cnt; // ADC 采样失败次数. - uint8_t collect_finish; // 采集数据是否完成 BOOL. - uint8_t continue_mode; // 是否是持续采样模式. - int16_t ADC_index; // ADC 采样当前采样 index. - int16_t ADC_buf[CFG_ADC_CH_CNT]; // ADC 采样临时 buffer. - int16_t reserve1[CFG_ADC_CH_CNT]; - int16_t ADC_value[CFG_ADC_CH_CNT][ADC_COLLECT_CNT]; // ADC 采样原始值. - int16_t ADC_value_elec[CFG_ADC_CH_CNT][ADC_COLLECT_CNT];// ADC 采样计算电流值. - uint32_t ADC_elec[CFG_ADC_CH_CNT]; // ADC 采样计算后的电流有效值 mA. + + ADC_HandleTypeDef *ADCi_adc; // ADCi 使用硬件句柄. uint16_t ADCi_value[ADCi_COLLECT_SUM]; // ADCi 采样原始值. uint32_t ADCi_param1; // ADCi 温度传感器校准系数 1. @@ -88,11 +77,20 @@ typedef struct uint16_t ADCi_vin; // ADCi 输入电压通道计算值, 单位: mv. uint16_t ADCi_vsc; // ADCi 超级电容电压通道计算值, 单位: mv. uint16_t ADCi_cnt; // ADCi 采样计数. + uint32_t ADCi_time; // ADCi 上次采集结束时间. uint8_t ADCi_state; // ADCi 采样状态. uint8_t ADCi_err_cnt; // ADCi 采样失败次数. - uint8_t energy_mode; // 设备工作模式 0 - 正常 1 - 休眠, 这个参数放这里, 主要是考虑到模式是由电流电压确定的. + + SPI_HandleTypeDef *ADC_spi; // ADC 使用的 SPI 句柄. + uint32_t collect_time; // ADC 上次采集结束时间. + uint8_t ADC_state; // ADC 采样状态. + uint8_t ADC_err_cnt; // ADC 采样失败次数. + int16_t ADC_value[CFG_ADC_CH_CNT][ADC_COLLECT_CNT]; // ADC 采样原始值. + int16_t ADC_value_elec[CFG_ADC_CH_CNT][ADC_COLLECT_CNT];// ADC 采样计算电流值. + uint32_t ADC_elec[CFG_ADC_CH_CNT]; // ADC 采样计算后的电流有效值 mA. + uint8_t up_finish; // 上传是否完成 BOOL. - uint32_t collect_time; // 上次采集结束时间. + uint8_t is_energy_first; // 用于判断是否第一次判断节能模式, 因为第一次判断节能模式后需要立即反应, 后续判断模式在 wireless 里反应. uint8_t is_ADC_thr; // ADC 采用超过工频阈值. uint8_t is_force_col; // ADC 主动采集. diff --git a/CablePositioning_APP_V1.0/Core/Inc/flash_if.h b/CablePositioning_APP_V1.0/Core/Inc/flash_if.h index 0fdfc08..850bcaa 100644 --- a/CablePositioning_APP_V1.0/Core/Inc/flash_if.h +++ b/CablePositioning_APP_V1.0/Core/Inc/flash_if.h @@ -50,19 +50,17 @@ #define FLASH_PAGE_NBPERBANK 256 /* spi flash分配示意图.注意:以下地址必须是扇区对齐. -0x0 0x1000 0x2000 0x3000 0x4000 0x5000 0x8000 0x10000 0x100000 0x900000 0xB00000 0xD00000 -***************************************************************************************************** -| CONF | CONFB | RECO | RECOB | INFO | INFOB | TFTP IAP | TFTP IMG | WARE | LOG | DATA | -*****************************************************************************************************/ -#define CONFIG_ADDRESS (uint32_t)0x0 -#define CONFIG_ADDRESS_BAK (uint32_t)0x1000 -#define RECORD_ADDRESS (uint32_t)0x2000 -#define RECORD_ADDRESS_BAK (uint32_t)0x3000 -#define INFO_ADDRESS (uint32_t)0x4000 -#define INFO_ADDRESS_BAK (uint32_t)0x5000 -#define TFTP_IAP_ADDRESS (uint32_t)0x8000 -#define TFTP_IAP_ADDRESS_END (uint32_t)0x10000 -#define TFTP_APP_ADDRESS (uint32_t)0x10000 +0x0 0x4000 0x8000 0xc000 0x10000 0x18000 0x20000 0x100000 0x900000 0xB00000 0xD00000 0xF00000 +************************************************************************************************* +| INFO | INFOB | RECO | RECOB | CONF | CONFB | TFTP IMG | WARE | LOG | DATA | STATE | +*************************************************************************************************/ +#define INFO_ADDRESS (uint32_t)0x0 +#define INFO_ADDRESS_BAK (uint32_t)0x4000 +#define RECORD_ADDRESS (uint32_t)0x8000 +#define RECORD_ADDRESS_BAK (uint32_t)0xC000 +#define CONFIG_ADDRESS (uint32_t)0x10000 +#define CONFIG_ADDRESS_BAK (uint32_t)0x18000 +#define TFTP_APP_ADDRESS (uint32_t)0x20000 #define TFTP_APP_ADDRESS_END (uint32_t)0x100000 #define WARE_ADDRESS (uint32_t)0x100000 #define WARE_ADDRESS_END (uint32_t)0x900000 @@ -78,14 +76,12 @@ #define SPI_FLASH_END_ADDRESS (uint32_t)0x1000000 /* 内部flash分配示意图. -0x08000000 APPLICATION_ADDRESS 0x08040000 +0x08000000 0x08020000 0x08100000 ******************************************************** | IAP | APP | *******************************************************/ -#define IAP_LEN 0x8000 -#define APP_LEN 0xF8000 #define IAP_ADDRESS (uint32_t)0x08000000 -#define APP_ADDRESS (uint32_t)0x08008000 +#define APP_ADDRESS (uint32_t)0x08020000 #define USER_FLASH_END_ADDRESS (uint32_t)0x08100000 /* 页,扇区,块大小. */ diff --git a/CablePositioning_APP_V1.0/Core/Inc/tim.h b/CablePositioning_APP_V1.0/Core/Inc/tim.h index 07afd0c..2f110a0 100644 --- a/CablePositioning_APP_V1.0/Core/Inc/tim.h +++ b/CablePositioning_APP_V1.0/Core/Inc/tim.h @@ -33,7 +33,6 @@ extern "C" { /* USER CODE END Includes */ extern TIM_HandleTypeDef htim1; -extern TIM_HandleTypeDef htim6; extern TIM_HandleTypeDef htim7; /* USER CODE BEGIN Private defines */ @@ -41,7 +40,6 @@ extern TIM_HandleTypeDef htim7; /* USER CODE END Private defines */ void MX_TIM1_Init(void); -void MX_TIM6_Init(void); void MX_TIM7_Init(void); /* USER CODE BEGIN Prototypes */ diff --git a/CablePositioning_APP_V1.0/Core/Src/ADC_collect.c b/CablePositioning_APP_V1.0/Core/Src/ADC_collect.c index 286e820..448cc7f 100644 --- a/CablePositioning_APP_V1.0/Core/Src/ADC_collect.c +++ b/CablePositioning_APP_V1.0/Core/Src/ADC_collect.c @@ -146,11 +146,6 @@ static void _ADCi_stop(uint8_t state) ADC_ctrl.ADCi_state |= state; /* 工厂模式不关闭外设. */ - if (!ADC_ctrl.continue_mode) - { - HAL_ADC_Stop_IT(ADC_ctrl.ADCi_adc); - HAL_ADC_DeInit(ADC_ctrl.ADCi_adc); - } ADC_ctrl.ADCi_cnt = 0; /* 错误时, 设置采样值为无效值. */ @@ -218,17 +213,7 @@ static int32_t _ADCi_collect(void) /* 关闭 ADCi 模块. */ _ADCi_stop(ADCi_ST_END); /* 计算 ADCi 的采样值. */ - _ADCi_calculate(); - - /* 超级电容电压小于 3.3V 设备不启动. */ - //if (ADC_ctrl.ADCi_vsc < 3300 && DEV_TYPE_CT == dev_info.type_s) - //{ - // system_shtudown(600); - //} - //else if(ADC_ctrl.ADCi_vbat < 3000 && DEV_TYPE_BAT == dev_info.type_s) - //{ - // system_shtudown(7200); - //} + _ADCi_calculate(); return HAL_OK; } @@ -236,175 +221,25 @@ static int32_t _ADCi_collect(void) /* 内部 ADC 采样初始化. */ static void _ADCi_init(void) { - /* 已开始不用再初始化. */ - if (ADC_ctrl.ADCi_state & ADCi_ST_START) - { - return; - } - - ADC_ctrl.ADCi_adc = &hadc1; /* 初始化 ADCi 温度传感器的内部校准系数. */ _ADCi_temp_sensor_init(); /* 校准 ADCi, 提高 ADCi 精度. */ HAL_ADCEx_Calibration_Start(ADC_ctrl.ADCi_adc, ADC_SINGLE_ENDED); - - ADC_ctrl.ADCi_state |= ADCi_ST_START; osDelay(1000); } -/* CT 取电下判断电源工作模式. */ -static void _ADC_energy_calculate_ct(void) -{ - ADC_ctrl_t *ADC = &ADC_ctrl; - uint32_t sleep_time = 600; - uint8_t is_save = FALSE; - uint8_t main_cable = 0; - - main_cable = dev_config.main_cable; - if (main_cable > 6) - { - main_cable = 4; - } - else if (main_cable != 0) - { - /* main_cable 范围是 0-5, 而 dev_config.main_cable 为 1-6*/ - main_cable--; - } - - if (ADC->ADCi_temp < -150 && st_data.is_bat_charge) - { - st_data.is_bat_charge = FALSE; - is_save = TRUE; - } - else if(ADC->ADCi_temp >= -130 && !st_data.is_bat_charge) - { - st_data.is_bat_charge = TRUE; - is_save = TRUE; - } - - if (st_data.is_bat_charge - && GPIO_PIN_SET == HAL_GPIO_ReadPin(BAT_CHECK_GPIO_Port, BAT_CHECK_Pin)) - { - /* 开始充电. */ - HAL_GPIO_WritePin(BAT_CHARGE_GPIO_Port, BAT_CHARGE_Pin, GPIO_PIN_RESET); - HAL_GPIO_WritePin(BAT_CLK_GPIO_Port, BAT_CLK_Pin, GPIO_PIN_SET); - osDelay(10); - HAL_GPIO_WritePin(BAT_CLK_GPIO_Port, BAT_CLK_Pin, GPIO_PIN_RESET); - } - else if((!st_data.is_bat_charge) - && GPIO_PIN_RESET == HAL_GPIO_ReadPin(BAT_CHECK_GPIO_Port, BAT_CHECK_Pin)) - { - /* 停止充电. */ - HAL_GPIO_WritePin(BAT_CHARGE_GPIO_Port, BAT_CHARGE_Pin, GPIO_PIN_SET); - HAL_GPIO_WritePin(BAT_CLK_GPIO_Port, BAT_CLK_Pin, GPIO_PIN_SET); - osDelay(10); - HAL_GPIO_WritePin(BAT_CLK_GPIO_Port, BAT_CLK_Pin, GPIO_PIN_RESET); - } - - /* 确定工作模式. */ - if (dev_config.energy_mode != ADC_ENERGY_AUTO) - { - ADC->energy_mode = dev_config.energy_mode; - } - else if (ADC->ADC_elec[main_cable] >= 20000 - && dev_config.main_cable != 0 - && dev_config.is_voltage_col - && ADC->ADCi_vbat > 2800) - { - ADC->energy_mode = ADC_ENERGY_NORMAL; - } - else if((ADC->ADCi_vbat >= 3600) - || (ADC->ADCi_vbat >= 3400 && ADC_ENERGY_NORMAL == st_data.energy_mode)) - { - ADC->energy_mode = ADC_ENERGY_NORMAL; - } - else if (ADC->ADCi_vbat > 2800) - { - ADC->energy_mode = ADC_ENERGY_SLEEP; - } - else - { - flash_log_write(FLASH_LOG_TYPE_WARNING, "CT to force sleep %ds!\r\n", sleep_time); - common_sys_set(COM_SYS_SHUTDOWN, (void*)&sleep_time); - osDelay(10000); - } - - if (is_save) - { - st_write(&st_data); - } -} - -/* 电池供电下判断电源工作模式. */ -static void _ADC_energy_calculate_bat(void) -{ - ADC_ctrl_t *ADC = &ADC_ctrl; - uint8_t is_save = FALSE; - - if (ADC->ADCi_temp < -150 && st_data.is_bat_charge) - { - st_data.is_bat_charge = FALSE; - is_save = TRUE; - } - else if(ADC->ADCi_temp >= -130 && !st_data.is_bat_charge) - { - st_data.is_bat_charge = TRUE; - is_save = TRUE; - } - - if (st_data.is_bat_charge - && GPIO_PIN_SET == HAL_GPIO_ReadPin(BAT_CHECK_GPIO_Port, BAT_CHECK_Pin)) - { - /* 开始充电. */ - HAL_GPIO_WritePin(BAT_CHARGE_GPIO_Port, BAT_CHARGE_Pin, GPIO_PIN_RESET); - HAL_GPIO_WritePin(BAT_CLK_GPIO_Port, BAT_CLK_Pin, GPIO_PIN_SET); - osDelay(10); - HAL_GPIO_WritePin(BAT_CLK_GPIO_Port, BAT_CLK_Pin, GPIO_PIN_RESET); - } - else if((!st_data.is_bat_charge) - && GPIO_PIN_RESET == HAL_GPIO_ReadPin(BAT_CHECK_GPIO_Port, BAT_CHECK_Pin)) - { - /* 停止充电. */ - HAL_GPIO_WritePin(BAT_CHARGE_GPIO_Port, BAT_CHARGE_Pin, GPIO_PIN_SET); - HAL_GPIO_WritePin(BAT_CLK_GPIO_Port, BAT_CLK_Pin, GPIO_PIN_SET); - osDelay(10); - HAL_GPIO_WritePin(BAT_CLK_GPIO_Port, BAT_CLK_Pin, GPIO_PIN_RESET); - } - - /* 确定工作模式. */ - if (dev_config.energy_mode != ADC_ENERGY_AUTO) - { - ADC->energy_mode = dev_config.energy_mode; - } - else if((ADC->ADCi_vbat >= 3600) - || (ADC->ADCi_vbat >= 3400 && ADC_ENERGY_NORMAL == st_data.energy_mode)) - { - ADC->energy_mode = ADC_ENERGY_NORMAL; - } - else - { - ADC->energy_mode = ADC_ENERGY_SLEEP; - } - - if (is_save) - { - st_write(&st_data); - } -} - -/* 电池供电下判断电源工作模式. */ -static void _ADC_energy_calculate_csg(void) +/* 判断电源工作模式. */ +static void _ADC_energy_calculate(void) { ADC_ctrl_t *ADC = &ADC_ctrl; - uint32_t sleep_time = 600; uint8_t is_save = FALSE; - if (ADC->ADCi_temp < -150 && st_data.is_bat_charge) + if (ADC->ADCi_temp < -100 && st_data.is_bat_charge) { st_data.is_bat_charge = FALSE; is_save = TRUE; } - else if(ADC->ADCi_temp >= -130 && !st_data.is_bat_charge) + else if(ADC->ADCi_temp >= -80 && !st_data.is_bat_charge) { st_data.is_bat_charge = TRUE; is_save = TRUE; @@ -428,229 +263,17 @@ static void _ADC_energy_calculate_csg(void) osDelay(10); HAL_GPIO_WritePin(BAT_CLK_GPIO_Port, BAT_CLK_Pin, GPIO_PIN_RESET); } - - /* 确定工作模式. 默认第 4 路数据是主缆电流 */ - if (dev_config.energy_mode != ADC_ENERGY_AUTO) - { - ADC->energy_mode = dev_config.energy_mode; - } - else if (ADC->ADCi_vbat <= 2800) - { - flash_log_write(FLASH_LOG_TYPE_WARNING, "V to force sleep %ds!\r\n", sleep_time); - common_sys_set(COM_SYS_SHUTDOWN, (void*)&sleep_time); - osDelay(10000); - } - else - { - ADC->energy_mode = ADC_ENERGY_NORMAL; - } if (is_save) { st_write(&st_data); } -} - -/* 稳定电源供电下判断电源工作模式. */ -static void _ADC_energy_calculate_acdc(void) -{ - ADC_ctrl_t *ADC = &ADC_ctrl; - - /* 确定工作模式. 默认第 4 路数据是主缆电流 */ - if (dev_config.energy_mode != ADC_ENERGY_AUTO) - { - ADC->energy_mode = dev_config.energy_mode; - } - else - { - ADC->energy_mode = ADC_ENERGY_NORMAL; - } -} - -/* CT 取电下判断电源工作模式. */ -static void _ADC_energy_calculate_scap(void) -{ - ADC_ctrl_t *ADC = &ADC_ctrl; - uint32_t sleep_time = 600; - uint8_t main_cable = 0; - - main_cable = dev_config.main_cable; - if (main_cable > 6) - { - main_cable = 4; - } - else if (main_cable != 0) - { - /* main_cable 范围是 0-5, 而 dev_config.main_cable 为 1-6*/ - main_cable--; - } - - //if (ADC->ADCi_vbat > 4100 && st_data.is_bat_charge) - //{ - // st_data.is_bat_charge = FALSE; - //} - //else if(ADC->ADCi_vbat < 3900 && !st_data.is_bat_charge) - { - st_data.is_bat_charge = TRUE; - } - - if (st_data.is_bat_charge - && GPIO_PIN_SET == HAL_GPIO_ReadPin(BAT_CHECK_GPIO_Port, BAT_CHECK_Pin)) - { - /* 开始充电. */ - HAL_GPIO_WritePin(BAT_CHARGE_GPIO_Port, BAT_CHARGE_Pin, GPIO_PIN_RESET); - HAL_GPIO_WritePin(BAT_CLK_GPIO_Port, BAT_CLK_Pin, GPIO_PIN_SET); - osDelay(10); - HAL_GPIO_WritePin(BAT_CLK_GPIO_Port, BAT_CLK_Pin, GPIO_PIN_RESET); - } - else if((!st_data.is_bat_charge) - && GPIO_PIN_RESET == HAL_GPIO_ReadPin(BAT_CHECK_GPIO_Port, BAT_CHECK_Pin)) - { - /* 停止充电. */ - HAL_GPIO_WritePin(BAT_CHARGE_GPIO_Port, BAT_CHARGE_Pin, GPIO_PIN_SET); - HAL_GPIO_WritePin(BAT_CLK_GPIO_Port, BAT_CLK_Pin, GPIO_PIN_SET); - osDelay(10); - HAL_GPIO_WritePin(BAT_CLK_GPIO_Port, BAT_CLK_Pin, GPIO_PIN_RESET); - } - - /* 确定工作模式. */ - if (dev_config.energy_mode != ADC_ENERGY_AUTO) - { - ADC->energy_mode = dev_config.energy_mode; - } - else if (ADC->ADC_elec[main_cable] >= 20000 - && dev_config.main_cable != 0 - && dev_config.is_voltage_col - && ADC->ADCi_vbat > 2800) - { - ADC->energy_mode = ADC_ENERGY_NORMAL; - } - else if((ADC->ADCi_vbat >= 3600) - || (ADC->ADCi_vbat >= 3400 && ADC_ENERGY_NORMAL == st_data.energy_mode)) - { - ADC->energy_mode = ADC_ENERGY_NORMAL; - } - else if (ADC->ADCi_vbat > 2800) - { - ADC->energy_mode = ADC_ENERGY_SLEEP; - } - else - { - flash_log_write(FLASH_LOG_TYPE_WARNING, "SCAP to force sleep %ds!\r\n", sleep_time); - common_sys_set(COM_SYS_SHUTDOWN, (void*)&sleep_time); - osDelay(10000); - } -} - -/* 故障定位模式判断电源工作模式. */ -static void _ADC_energy_calculate_ct_p(void) -{ - ADC_ctrl_t *ADC = &ADC_ctrl; - uint32_t sleep_time = 0; - uint8_t is_save = FALSE; - - /* 电压小于等于 2.8V 时，休眠 10 分钟 */ - if (ADC->ADCi_vbat <= 2800) - { - sleep_time = 600; - } - - if (ADC->ADCi_temp < -150 && st_data.is_bat_charge) - { - st_data.is_bat_charge = FALSE; - is_save = TRUE; - } - else if(ADC->ADCi_temp >= -130 && !st_data.is_bat_charge) - { - st_data.is_bat_charge = TRUE; - is_save = TRUE; - } - if (st_data.is_bat_charge - && GPIO_PIN_SET == HAL_GPIO_ReadPin(BAT_CHECK_GPIO_Port, BAT_CHECK_Pin)) - { - /* 开始充电. */ - HAL_GPIO_WritePin(BAT_CHARGE_GPIO_Port, BAT_CHARGE_Pin, GPIO_PIN_RESET); - HAL_GPIO_WritePin(BAT_CLK_GPIO_Port, BAT_CLK_Pin, GPIO_PIN_SET); - osDelay(10); - HAL_GPIO_WritePin(BAT_CLK_GPIO_Port, BAT_CLK_Pin, GPIO_PIN_RESET); - } - else if((!st_data.is_bat_charge) - && GPIO_PIN_RESET == HAL_GPIO_ReadPin(BAT_CHECK_GPIO_Port, BAT_CHECK_Pin)) - { - /* 停止充电. */ - HAL_GPIO_WritePin(BAT_CHARGE_GPIO_Port, BAT_CHARGE_Pin, GPIO_PIN_SET); - HAL_GPIO_WritePin(BAT_CLK_GPIO_Port, BAT_CLK_Pin, GPIO_PIN_SET); - osDelay(10); - HAL_GPIO_WritePin(BAT_CLK_GPIO_Port, BAT_CLK_Pin, GPIO_PIN_RESET); - } - - /* 故障定位只有正常模式 */ - ADC->energy_mode = ADC_ENERGY_NORMAL; - - if (is_save) - { - st_write(&st_data); - } - - if (sleep_time) - { - flash_log_write(FLASH_LOG_TYPE_WARNING, "POSITION to force sleep %ds!\r\n", sleep_time); - common_sys_set(COM_SYS_SHUTDOWN, (void*)&sleep_time); - osDelay(10000); - } -} - -/* 判断电源工作模式. */ -static void _ADC_energy_calculate(void) -{ - if (DEV_TYPE_CT == dev_info.type_s) - { - _ADC_energy_calculate_ct(); - } - else if(DEV_TYPE_BAT == dev_info.type_s) - { - _ADC_energy_calculate_bat(); - } - else if(DEV_TYPE_CSG == dev_info.type_s) - { - _ADC_energy_calculate_csg(); - } - else if(DEV_TYPE_SCAP == dev_info.type_s) - { - _ADC_energy_calculate_scap(); - } - else if (DEV_TYPE_CT_P == dev_info.type_s) - { - _ADC_energy_calculate_ct_p(); - } - else - { - _ADC_energy_calculate_acdc(); - } - - if (st_data.energy_mode != ADC_ctrl.energy_mode) - { - st_data.energy_mode = ADC_ctrl.energy_mode; - st_write(&st_data); - flash_log_write(FLASH_LOG_TYPE_NOTIFY, "Energy is change to %s!\r\n", energy_str[st_data.energy_mode]); - } -} - -/* 工频 buffer 赋值, 5 次采样取一次最大值. */ -static void _ADC_buffer_set(void) -{ - uint8_t ch = 0; - - /* 将值赋值给buf. */ - for(ch = 0; ch < CFG_ADC_CH_CNT; ch++) + /* 超级电容电压小于 3.3V 设备不启动. */ + if(ADC_ctrl.ADCi_vbat < 3000) { - /* 对 buf 赋值. */ - ADC_ctrl.ADC_value[ch][ADC_ctrl.ADC_index] = ADC_ctrl.ADC_buf[ch]; + system_shtudown(7200); } - - /* 重置变量. */ - ADC_ctrl.ADC_index++; } /* 计算 ADC 的采样值. */ @@ -711,7 +334,7 @@ static void _ADC_calculate(void) } /* 计算工频录波每个点的电流值, 每次要上传工频录波才进行计算, 这里还要判断前 4 路采样是否超过阈值. */ - if (!ADC->collect_finish && ADC->up_finish) + if (ADC->up_finish) { if (first_col) { @@ -737,10 +360,7 @@ static void _ADC_calculate(void) /* 关闭 ADC 采样. */ static void _ADC_collect_stop(void) { - HAL_TIM_Base_Stop_IT(ADC_ctrl.ADC_tim); ADC_ctrl.ADC_err_cnt++; - ADC_ctrl.ADC_index = 0; - ADC_ctrl.ADC_cnt = 0; } /* 关闭 ADC 采样模块. */ @@ -749,32 +369,12 @@ static void _ADC_stop(uint8_t state) ADC_ctrl.ADC_state |= state; _ADC_collect_stop(); ADC_ctrl.ADC_err_cnt = 0; - - /* 工厂模式不关闭外设. */ - if (!ADC_ctrl.continue_mode) - { - /* 关闭 ADC 模块 */ - HAL_GPIO_WritePin(POWER_EN_ADC_GPIO_Port, POWER_EN_ADC_Pin, GPIO_PIN_RESET); - HAL_GPIO_WritePin(ADC_CS_GPIO_Port, ADC_CS_Pin, GPIO_PIN_RESET); - HAL_GPIO_WritePin(ADC_OS1_GPIO_Port, ADC_OS1_Pin, GPIO_PIN_RESET); - HAL_GPIO_WritePin(ADC_OS2_GPIO_Port, ADC_OS2_Pin, GPIO_PIN_RESET); - HAL_SPI_Abort(ADC_ctrl.ADC_spi); - HAL_SPI_DeInit(ADC_ctrl.ADC_spi); - HAL_TIM_Base_Stop(ADC_ctrl.ADC_tim); - HAL_TIM_Base_DeInit(ADC_ctrl.ADC_tim); - } } /* 重新启动 ADC 采样模块. */ static void _ADC_restart(void) -{ - MX_ADC1_Init(); - MX_SPI2_Init(); - MX_TIM6_Init(); - osDelay(100); +{ - ADC_ctrl.ADCi_state = 0; - ADC_ctrl.ADC_state = 0; } /* 外部 ADC 采集工频电流数据, 每路采集1000点/s. */ @@ -798,9 +398,7 @@ static int32_t _ADC_collect(void) } /* 开始采样. */ - HAL_TIM_Base_Start_IT(ADC_ctrl.ADC_tim); - - while((ADC_CNT_SUM + ADC_PER_CNT) != ADC_ctrl.ADC_cnt) + while((ADC_CNT_SUM + ADC_PER_CNT)) { tick = HAL_GetTick(); while(1) @@ -822,15 +420,6 @@ static int32_t _ADC_collect(void) } /* 读取 ADC 采样原始值. */ - HAL_GPIO_WritePin(ADC_CS_GPIO_Port, ADC_CS_Pin, GPIO_PIN_RESET); - HAL_SPI_Receive(ADC_ctrl.ADC_spi, (uint8_t*)ADC_ctrl.ADC_buf, CFG_ADC_CH_CNT, ADC_SPI_TIMEOUT); - HAL_GPIO_WritePin(ADC_CS_GPIO_Port, ADC_CS_Pin, GPIO_PIN_SET); - - /* 根据算法, 给工频 buffer 赋值. */ - if (ADC_ctrl.ADC_cnt > ADC_PER_CNT) - { - _ADC_buffer_set(); - } } /* 结束采样并计算采样值. */ @@ -881,277 +470,65 @@ static void _ADC_data_save(void) ADC_data.sen_z[i] = sensor_value[i].joint_attitude_z; ADC_data.sen_valid[i] = sensor_value[i].is_valid; } - ADC_data.energy_mode = ADC_ctrl.energy_mode; ADC_data.sen_short = sensor_short; ADC_data.is_not_updata = TRUE; fd_write(&ADC_data); } -/* 外部 ADC 采样初始化. */ -static void _ADC_init(void) -{ - /* 已开始不用再初始化. */ - if (ADC_ctrl.ADC_state & ADC_ST_START) - { - return; - } - - /* 这里等待 8s 因为硬件供电后, ADC采样引脚电压稳定需要时间. */ - /* ADC 采样供电初始化. */ - HAL_GPIO_WritePin(ADC_CS_GPIO_Port, ADC_CS_Pin, GPIO_PIN_SET); - HAL_GPIO_WritePin(ADC_OS1_GPIO_Port, ADC_OS1_Pin, GPIO_PIN_SET); - HAL_GPIO_WritePin(ADC_OS2_GPIO_Port, ADC_OS2_Pin, GPIO_PIN_SET); - osDelay(1); - HAL_GPIO_WritePin(POWER_EN_5V_GPIO_Port, POWER_EN_5V_Pin, GPIO_PIN_SET); - HAL_GPIO_WritePin(POWER_EN_ADC_GPIO_Port, POWER_EN_ADC_Pin, GPIO_PIN_SET); - osDelay(3000); - /* ADC RESET. */ - HAL_GPIO_WritePin(ADC_RST_GPIO_Port, ADC_RST_Pin, GPIO_PIN_SET); - osDelay(100); - HAL_GPIO_WritePin(ADC_RST_GPIO_Port, ADC_RST_Pin, GPIO_PIN_RESET); - osDelay(1000); - - ADC_ctrl.ADC_state |= ADC_ST_START; -} - /* ADC 采集主任务循环. */ static void _ADC_start(void *argument) { - uint8_t cnt = 0; - - ADC_ctrl.ADC_tim = &htim6; + /* 状态初始化 */ + ADC_ctrl.ADCi_adc = &hadc1; ADC_ctrl.ADC_spi = &hspi2; - ADC_ctrl.collect_finish = FALSE; ADC_ctrl.up_finish = TRUE; + ADC_ctrl.ADCi_time = HAL_GetTick(); ADC_ctrl.collect_time = HAL_GetTick(); + + _ADCi_init(); for (;;) { - _ADCi_init(); - /* 进行内部 ADC 采样, 如果超时就继续, 3次超时会返回错误, 进行下一步操作. */ + /* 设备电压, 温度采集 */ if (HAL_TIMEOUT == _ADCi_collect()) { continue; } - if (dev_config.is_voltage_col) - { - _ADC_init(); - /* 进行外部 ADC 采样, 如果超时就继续, 3次超时会返回错误, 进行下一步操作. */ - if (HAL_TIMEOUT == _ADC_collect()) - { - continue; - } - } - else - { - _ADC_collect_free(); - } - - /* 确定节能模式. */ + /* 确定充电模式和设备强制休眠 */ _ADC_energy_calculate(); - /* 故障定位版本装置不接温度振动传感器 */ - if (DEV_TYPE_CT_P != dev_info.type_s) - { - /* 校准模式不开启传感器采样, 传感器 485 口用于接校准设备. */ - if (!IS_MONITOR_BIT_SET(dev_config.flag, DEV_FLAG_ADJ) - && dev_config.is_temp_col) - { - if (!ADC_ctrl.collect_finish && ADC_ctrl.up_finish) - { - sensor_start(); - } - } - else - { - sensor_start_free(); - } - } - - /* 此处需要在传感器采样完成后才能关闭, 因为 5V 要给 ADC 和传感器供电. */ - if (!IS_MONITOR_BIT_SET(dev_config.flag, DEV_FLAG_ADJ) && (DEV_TYPE_CT_P != dev_info.type_s)) - { - /* 校准模式与故障定位版本不要关 5V 供电, 485 芯片需要供电. */ - HAL_GPIO_WritePin(POWER_EN_5V_GPIO_Port, POWER_EN_5V_Pin, GPIO_PIN_RESET); - } - - if (!ADC_ctrl.collect_finish && ADC_ctrl.up_finish) - { - ADC_ctrl.collect_finish = TRUE; - ADC_ctrl.up_finish = FALSE; - _ADC_data_save(); - } - /* 标志 ADC 内部电压采样完成. */ MONITOR_BITMAP_SET(system_init_flag, SYS_INIT_ADC); - - osDelay(5000); - common_watchdog_set(COM_WDG_ADC); - /* 校准模式不自动循环采样. */ - if (!IS_MONITOR_BIT_SET(dev_config.flag, DEV_FLAG_ADJ)) - { - /* 超过上传间隔, 需要重新上传数据. */ - if ((HAL_GetTick() - ADC_ctrl.collect_time) > (dev_config.collect_interval * 60000)) - { - cnt = 0; - _ADC_restart(); - - ADC_ctrl.collect_finish = FALSE; - ADC_ctrl.collect_time = HAL_GetTick(); - } - else - { - cnt++; - if (cnt >= 8) - { - _ADC_restart(); - cnt = 0; - } - } - } - } -} - -/* ADC 采集主任务循环. */ -static void _ADC_start_csg(void *argument) -{ - ADC_ctrl.ADC_tim = &htim6; - ADC_ctrl.ADC_spi = &hspi2; - ADC_ctrl.collect_finish = FALSE; - ADC_ctrl.up_finish = TRUE; - - for (;;) - { - _ADCi_init(); - /* 进行内部 ADC 采样, 如果超时就继续, 3次超时会返回错误, 进行下一步操作. */ - if (HAL_TIMEOUT == _ADCi_collect()) - { - continue; - } - - _ADC_init(); - /* 进行外部 ADC 采样, 如果超时就继续, 3次超时会返回错误, 进行下一步操作. */ + /* 工频电流和隐患电流采集 */ if (HAL_TIMEOUT == _ADC_collect()) { continue; } - - /* 确定节能模式. */ - _ADC_energy_calculate(); - - /* 校准模式不要关 5V 供电, 485 芯片需要供电. */ - HAL_GPIO_WritePin(POWER_EN_5V_GPIO_Port, POWER_EN_5V_Pin, GPIO_PIN_RESET); - if (!ADC_ctrl.collect_finish) + if (ADC_ctrl.up_finish) { - ADC_ctrl.collect_finish = TRUE; ADC_ctrl.up_finish = FALSE; - if (ADC_ctrl.is_force_col) - { - ADC_ctrl.is_force_col = FALSE; - } - else - { - ADC_ctrl.collect_time = HAL_GetTick(); - } _ADC_data_save(); } - /* 标志 ADC 内部电压采样完成. */ - MONITOR_BITMAP_SET(system_init_flag, SYS_INIT_ADC); - osDelay(5000); common_watchdog_set(COM_WDG_ADC); - restart_ontime(); - - /* 超过上传间隔, 需要重新上传数据. */ - if ((HAL_GetTick() - ADC_ctrl.collect_time) > (dev_config.collect_interval * 60000)) - { - _ADC_restart(); - ADC_ctrl.collect_finish = FALSE; - } - } -} - -/* ADC 采集主任务循环. */ -static void _ADC_start_continue(void *argument) -{ - /* 初始化. */ - ADC_ctrl.ADC_tim = &htim6; - ADC_ctrl.ADC_spi = &hspi2; - _ADCi_init(); - _ADC_init(); - ADC_ctrl.continue_mode = TRUE; - ADC_ctrl.collect_finish = FALSE; - ADC_ctrl.up_finish = TRUE; - ADC_ctrl.collect_time = HAL_GetTick(); - for (;;) - { - /* 进行内部 ADC 采样, 如果超时就继续, 3次超时会返回错误, 进行下一步操作. */ - if (HAL_TIMEOUT == _ADCi_collect()) + /* 内部 ADC 采集间隔 */ + if ((HAL_GetTick() - ADC_ctrl.collect_time) > 20000) { - continue; + ADC_ctrl.ADCi_state = 0; + ADC_ctrl.ADCi_time = HAL_GetTick(); } - if (dev_config.is_voltage_col) - { - /* 进行外部 ADC 采样, 如果超时就继续, 3次超时会返回错误, 进行下一步操作. */ - if (HAL_TIMEOUT == _ADC_collect()) - { - continue; - } - } - else - { - _ADC_collect_free(); - } - - /* 确定节能模式. */ - _ADC_energy_calculate(); - - if (DEV_TYPE_CT_P != dev_info.type_s) - { - /* 传感器数据采集. */ - if (dev_config.is_temp_col) - { - sensor_start(); - } - else - { - sensor_start_free(); - } - } - else - { - position_start(); - } - - if (!ADC_ctrl.collect_finish && ADC_ctrl.up_finish) - { - ADC_ctrl.collect_finish = TRUE; - ADC_ctrl.up_finish = FALSE; - _ADC_data_save(); - } - - /* 标志 ADC 内部电压采样完成. */ - MONITOR_BITMAP_SET(system_init_flag, SYS_INIT_ADC); - - osDelay(1000); - common_watchdog_set(COM_WDG_ADC); - - /* 重新采样一次 */ - ADC_ctrl.ADCi_state = 0; - ADC_ctrl.ADC_state = 0; - /* 超过上传间隔, 需要重新上传数据. */ - if ((HAL_GetTick() - ADC_ctrl.collect_time) > dev_config.collect_interval * 60000) + if ((HAL_GetTick() - ADC_ctrl.collect_time) > (dev_config.collect_interval * 60000)) { + ADC_ctrl.ADC_state = 0; ADC_ctrl.collect_time = HAL_GetTick(); - ADC_ctrl.collect_finish = FALSE; } } } @@ -1161,26 +538,9 @@ static void _ADC_start_continue(void *argument) void ADC_init_os(void) { fd_read(fd_id, &ADC_data); + position_init(); - /* 故障定位版本装置且非校准模式时进行初始化 */ - if (DEV_TYPE_CT_P == dev_info.type_s && !IS_MONITOR_BIT_SET(dev_config.flag, DEV_FLAG_ADJ)) - { - position_init(); - } - - if (IS_MONITOR_BIT_SET(dev_config.flag, DEV_FLAG_FACTORY) - || (DEV_TYPE_ACDC == dev_info.type_s && !IS_MONITOR_BIT_SET(dev_config.flag, DEV_FLAG_ADJ))) - { - ADC_ctrl.ADCHandle = osThreadNew(_ADC_start_continue, NULL, &ADC_attributes); - } - else if (DEV_TYPE_CSG == dev_info.type_s && !IS_MONITOR_BIT_SET(dev_config.flag, DEV_FLAG_ADJ)) - { - ADC_ctrl.ADCHandle = osThreadNew(_ADC_start_csg, NULL, &ADC_attributes); - } - else - { - ADC_ctrl.ADCHandle = osThreadNew(_ADC_start, NULL, &ADC_attributes); - } + ADC_ctrl.ADCHandle = osThreadNew(_ADC_start, NULL, &ADC_attributes); } /* ADCi 电池电压自动校准. */ @@ -1273,12 +633,8 @@ HAL_StatusTypeDef ADC_base_auto(uint8_t ch_bitmap, uint8_t index) /* 马上重新开始一次数据采集. */ void ADC_restart_force(void) { - if (ADC_ctrl.collect_finish) - { _ADC_restart(); - ADC_ctrl.collect_finish = FALSE; ADC_ctrl.is_force_col = TRUE; - } } /* ADCi 采集显示接口. */ @@ -1308,7 +664,7 @@ void ADC_show(void) { vty_print("%-06d ", ADC->ADC_elec[i]); } - vty_print("%-02d %-02d %-02d %-02d %-02x\r\n", ADC->collect_finish, ADC->up_finish, ADC->is_ADC_thr, ADC->ADC_err_cnt, + vty_print("%-02d %-02d %-02d %-02x\r\n", ADC->up_finish, ADC->is_ADC_thr, ADC->ADC_err_cnt, ADC->ADC_state); } diff --git a/CablePositioning_APP_V1.0/Core/Src/RS485_debug.c b/CablePositioning_APP_V1.0/Core/Src/RS485_debug.c index 1b3986e..befec42 100644 --- a/CablePositioning_APP_V1.0/Core/Src/RS485_debug.c +++ b/CablePositioning_APP_V1.0/Core/Src/RS485_debug.c @@ -288,7 +288,7 @@ static void _debug_pkt_default(void) /* 擦除内部 IAP, 并升级 IAP. */ static int32_t _debug_updata_iap(void) { - uint32_t spi_flash_address = TFTP_IAP_ADDRESS; + uint32_t spi_flash_address = TFTP_APP_ADDRESS; uint32_t flash_write_address = IAP_ADDRESS; uint32_t fireware_size = SPI_FLASH_BLOCK_SIZE; uint16_t write_size = 0; @@ -410,13 +410,13 @@ static void _debug_pkt_update_iap(void) proto_head_t *head = (proto_head_t*)debug_buf.buf; mul_head_t *m_head = (mul_head_t*)(debug_buf.buf + sizeof(proto_head_t)); uint8_t *data = (uint8_t*)(debug_buf.buf + sizeof(proto_head_t) + sizeof(mul_head_t)); - uint32_t addr = TFTP_IAP_ADDRESS; + uint32_t addr = TFTP_APP_ADDRESS; uint32_t *crc = NULL; /* index 为 0 表示是首保, 需要擦除 FLASH. */ if (0 == m_head->index) { - while(addr != TFTP_IAP_ADDRESS_END) + while(addr != TFTP_APP_ADDRESS_END) { if (spi_flash_erase(addr, SPI_CMD_BLOCK32_ERASE) != HAL_OK) { @@ -429,8 +429,8 @@ static void _debug_pkt_update_iap(void) } /* 计算写 FLASH 地址, 并写入 FLASH. */ - addr = TFTP_IAP_ADDRESS + m_head->index * DEBUG_FLASH_BUF_SIZE; - if (addr >= TFTP_IAP_ADDRESS_END) + addr = TFTP_APP_ADDRESS + m_head->index * DEBUG_FLASH_BUF_SIZE; + if (addr >= TFTP_APP_ADDRESS_END) { return; } @@ -447,7 +447,7 @@ static void _debug_pkt_update_iap(void) if(m_head->len < DEBUG_FLASH_BUF_SIZE) { /* 校验报文. */ - if (debug_app_check(TFTP_IAP_ADDRESS, addr - TFTP_IAP_ADDRESS + m_head->len, 1) != HAL_OK) + if (debug_app_check(TFTP_APP_ADDRESS, addr - TFTP_APP_ADDRESS + m_head->len, 1) != HAL_OK) { return; } @@ -967,7 +967,6 @@ static void _debug_pkt_data_get(void) data->sen_y[i] = sensor_value[i].joint_attitude_y; data->sen_z[i] = sensor_value[i].joint_attitude_z; } - data->energy_mode = ADC_ctrl.energy_mode; data->sen_short = sensor_short; /* 计算校验和. */ @@ -1096,8 +1095,6 @@ static void _debug_pkt_dev_state_get(void) _debug_pkt_head_init(sizeof(proto_head_t) + sizeof(dev_state_t), DEBUG_CT_PRV_REPLY); /* 装填数据. */ - data->energy_mode = ADC_ctrl.energy_mode; - data->is_adc_collect = ADC_ctrl.collect_finish; data->is_adc_up = ADC_ctrl.up_finish; data->adci_cnt = ADC_ctrl.ADCi_err_cnt; data->adci_state = ADC_ctrl.ADCi_state; diff --git a/CablePositioning_APP_V1.0/Core/Src/cli.c b/CablePositioning_APP_V1.0/Core/Src/cli.c index 74e31de..2379c99 100644 --- a/CablePositioning_APP_V1.0/Core/Src/cli.c +++ b/CablePositioning_APP_V1.0/Core/Src/cli.c @@ -658,7 +658,6 @@ static BaseType_t _cli_show(const char *string) vty_print("Debug mode: %s\r\n", IS_MONITOR_BIT_SET(dev_config.flag, DEV_FLAG_CLI) ? "CLI" : "PC"); vty_print("Work mode: %s\r\n", IS_MONITOR_BIT_SET(dev_config.flag, DEV_FLAG_ADJ) ? "ADJ" : "NORMAL"); vty_print("Work mode: %s\r\n", IS_MONITOR_BIT_SET(dev_config.flag, DEV_FLAG_FACTORY) ? "FACTORY" : "NORMAL"); - vty_print("Energy mode: %d\r\n", ADC_ctrl.energy_mode); vty_print("Normal sleep: %d\r\n", dev_config.normal_sleep); vty_print("Force sleep up: %d\r\n", st_data.force_sleep_up); vty_print("BAT charge: %d\r\n", HAL_GPIO_ReadPin(BAT_CHECK_GPIO_Port, BAT_CHECK_Pin)); diff --git a/CablePositioning_APP_V1.0/Core/Src/main.c b/CablePositioning_APP_V1.0/Core/Src/main.c index 40c3411..23307ed 100644 --- a/CablePositioning_APP_V1.0/Core/Src/main.c +++ b/CablePositioning_APP_V1.0/Core/Src/main.c @@ -102,7 +102,6 @@ int main(void) MX_ADC1_Init(); MX_RTC_Init(); MX_SPI3_Init(); - MX_TIM6_Init(); MX_SPI2_Init(); MX_SPI1_Init(); /* USER CODE BEGIN 2 */ diff --git a/CablePositioning_APP_V1.0/Core/Src/recording_wave.c b/CablePositioning_APP_V1.0/Core/Src/recording_wave.c index 049e9f1..af6da1d 100644 --- a/CablePositioning_APP_V1.0/Core/Src/recording_wave.c +++ b/CablePositioning_APP_V1.0/Core/Src/recording_wave.c @@ -800,8 +800,7 @@ static void _wave_task(void *argument) for (;;) { /* 非正常模式不录波. */ - if (ADC_ctrl.energy_mode != ADC_ENERGY_NORMAL - || 0 == dev_config.is_wave_col + if (0 == dev_config.is_wave_col || (ADC_ctrl.ADCi_vbat < 3600 && dev_info.type_s != DEV_TYPE_ACDC)) { _wave_stop(WAVE_RT_END); diff --git a/CablePositioning_APP_V1.0/Core/Src/stm32l4xx_it.c b/CablePositioning_APP_V1.0/Core/Src/stm32l4xx_it.c index dbea6fd..5955761 100644 --- a/CablePositioning_APP_V1.0/Core/Src/stm32l4xx_it.c +++ b/CablePositioning_APP_V1.0/Core/Src/stm32l4xx_it.c @@ -60,7 +60,6 @@ extern ADC_HandleTypeDef hadc1; extern SPI_HandleTypeDef hspi1; extern TIM_HandleTypeDef htim1; -extern TIM_HandleTypeDef htim6; extern TIM_HandleTypeDef htim7; extern DMA_HandleTypeDef hdma_uart4_rx; extern DMA_HandleTypeDef hdma_uart4_tx; @@ -335,20 +334,6 @@ void UART4_IRQHandler(void) /* USER CODE END UART4_IRQn 1 */ } -/** - * @brief This function handles TIM6 global interrupt, DAC channel1 and channel2 underrun error interrupts. - */ -void TIM6_DAC_IRQHandler(void) -{ - /* USER CODE BEGIN TIM6_DAC_IRQn 0 */ - - /* USER CODE END TIM6_DAC_IRQn 0 */ - HAL_TIM_IRQHandler(&htim6); - /* USER CODE BEGIN TIM6_DAC_IRQn 1 */ - - /* USER CODE END TIM6_DAC_IRQn 1 */ -} - /** * @brief This function handles TIM7 global interrupt. */ diff --git a/CablePositioning_APP_V1.0/Core/Src/tim.c b/CablePositioning_APP_V1.0/Core/Src/tim.c index a28d05c..796c347 100644 --- a/CablePositioning_APP_V1.0/Core/Src/tim.c +++ b/CablePositioning_APP_V1.0/Core/Src/tim.c @@ -27,7 +27,6 @@ /* USER CODE END 0 */ TIM_HandleTypeDef htim1; -TIM_HandleTypeDef htim6; TIM_HandleTypeDef htim7; /* TIM1 init function */ @@ -71,39 +70,6 @@ void MX_TIM1_Init(void) /* USER CODE END TIM1_Init 2 */ -} -/* TIM6 init function */ -void MX_TIM6_Init(void) -{ - - /* USER CODE BEGIN TIM6_Init 0 */ - - /* USER CODE END TIM6_Init 0 */ - - TIM_MasterConfigTypeDef sMasterConfig = {0}; - - /* USER CODE BEGIN TIM6_Init 1 */ - - /* USER CODE END TIM6_Init 1 */ - htim6.Instance = TIM6; - htim6.Init.Prescaler = 19999; - htim6.Init.CounterMode = TIM_COUNTERMODE_UP; - htim6.Init.Period = 1; - htim6.Init.AutoReloadPreload = TIM_AUTORELOAD_PRELOAD_ENABLE; - if (HAL_TIM_Base_Init(&htim6) != HAL_OK) - { - Error_Handler(); - } - sMasterConfig.MasterOutputTrigger = TIM_TRGO_RESET; - sMasterConfig.MasterSlaveMode = TIM_MASTERSLAVEMODE_DISABLE; - if (HAL_TIMEx_MasterConfigSynchronization(&htim6, &sMasterConfig) != HAL_OK) - { - Error_Handler(); - } - /* USER CODE BEGIN TIM6_Init 2 */ - - /* USER CODE END TIM6_Init 2 */ - } /* TIM7 init function */ void MX_TIM7_Init(void) @@ -157,21 +123,6 @@ void HAL_TIM_Base_MspInit(TIM_HandleTypeDef* tim_baseHandle) /* USER CODE END TIM1_MspInit 1 */ } - else if(tim_baseHandle->Instance==TIM6) - { - /* USER CODE BEGIN TIM6_MspInit 0 */ - - /* USER CODE END TIM6_MspInit 0 */ - /* TIM6 clock enable */ - __HAL_RCC_TIM6_CLK_ENABLE(); - - /* TIM6 interrupt Init */ - HAL_NVIC_SetPriority(TIM6_DAC_IRQn, 5, 0); - HAL_NVIC_EnableIRQ(TIM6_DAC_IRQn); - /* USER CODE BEGIN TIM6_MspInit 1 */ - - /* USER CODE END TIM6_MspInit 1 */ - } else if(tim_baseHandle->Instance==TIM7) { /* USER CODE BEGIN TIM7_MspInit 0 */ @@ -206,20 +157,6 @@ void HAL_TIM_Base_MspDeInit(TIM_HandleTypeDef* tim_baseHandle) /* USER CODE END TIM1_MspDeInit 1 */ } - else if(tim_baseHandle->Instance==TIM6) - { - /* USER CODE BEGIN TIM6_MspDeInit 0 */ - - /* USER CODE END TIM6_MspDeInit 0 */ - /* Peripheral clock disable */ - __HAL_RCC_TIM6_CLK_DISABLE(); - - /* TIM6 interrupt Deinit */ - HAL_NVIC_DisableIRQ(TIM6_DAC_IRQn); - /* USER CODE BEGIN TIM6_MspDeInit 1 */ - - /* USER CODE END TIM6_MspDeInit 1 */ - } else if(tim_baseHandle->Instance==TIM7) { /* USER CODE BEGIN TIM7_MspDeInit 0 */ @@ -263,23 +200,7 @@ void HAL_TIM_PeriodElapsedCallback(TIM_HandleTypeDef *htim) common_watchdog_clr(); } - } - else if (TIM6 == htim->Instance) - { - /* 500us ADC collect. */ - HAL_GPIO_TogglePin(ADC_CONVST_GPIO_Port, ADC_CONVST_Pin); - HAL_GPIO_TogglePin(ADC_CONVST_GPIO_Port, ADC_CONVST_Pin); - - /* ADC count. */ - ADC_ctrl.ADC_cnt++; - notify_to_task_form_val(ADC_ctrl.ADCHandle, MONITOR_ADC_NOTIFY_OK); - - /* 2K ollect complete, stop. */ - if ((ADC_CNT_SUM + ADC_PER_CNT) == ADC_ctrl.ADC_cnt) - { - HAL_TIM_Base_Stop_IT(htim); - } - } + } else if (TIM7 == htim->Instance) { HAL_GPIO_TogglePin(DAU_50HZ_GPIO_Port, DAU_50HZ_Pin); diff --git a/CablePositioning_APP_V1.0/Core/Src/wireless.c b/CablePositioning_APP_V1.0/Core/Src/wireless.c index 2031769..fd43af5 100644 --- a/CablePositioning_APP_V1.0/Core/Src/wireless.c +++ b/CablePositioning_APP_V1.0/Core/Src/wireless.c @@ -258,8 +258,7 @@ static void _wl_4G_hw_close(uint32_t sleep_time) st_write(&st_data); } - if (ADC_ctrl.energy_mode != ADC_ENERGY_NORMAL - && sleep_time < 1800) + if (sleep_time < 1800) { sleep_time = 1800; } @@ -1213,7 +1212,6 @@ void _wl_4G_init_soft(void) wl_ctrl.time_send = 0; wl_ctrl.send_cnt = 0; - wl_ctrl.energy_mode_old = ADC_ctrl.energy_mode; } else if (is_timeout) { @@ -1301,7 +1299,6 @@ static void _wl_4G_realdata_send(void) data->sen_z[i] = sensor_value[i].joint_attitude_z; data->sen_valid[i] = sensor_value[i].is_valid; } - data->energy_mode = ADC_ctrl.energy_mode; data->sen_short = sensor_short; data->run_time = HAL_GetTick() / 1000; data->fre_valid = !ADC_ctrl.up_finish && ADC_ctrl.is_ADC_thr; @@ -1791,7 +1788,7 @@ void _wl_4G_data_send(void) else if (WL_STATE_WAVE == wl_ctrl.state) { /* 高频录波报文. */ - if (!st_data.wave_start && st_data.wave_up_start && ADC_ENERGY_NORMAL == ADC_ctrl.energy_mode) + if (!st_data.wave_start && st_data.wave_up_start) { _wl_4G_wave_send(); wl_ctrl.send_cnt++; @@ -1807,8 +1804,7 @@ void _wl_4G_data_send(void) else if (WL_STATE_WAVE_MAX == wl_ctrl.state) { /* 高频最大值报文. */ - if ((st_data.wave_max[0] || st_data.wave_max[1] || st_data.wave_max[2] || st_data.wave_max[3]) - && (ADC_ENERGY_NORMAL == ADC_ctrl.energy_mode)) + if (st_data.wave_max[0] || st_data.wave_max[1] || st_data.wave_max[2] || st_data.wave_max[3]) { _wl_4G_wave_max_send(); wl_ctrl.send_cnt++; @@ -1947,17 +1943,11 @@ static void _wl_4G_start(void *argument) } } /* 当状态为 WL_STATE_END 时, 先判断节能模式. */ - if (ADC_ctrl.energy_mode != ADC_ENERGY_NORMAL - || (dev_config.normal_sleep && DEV_TYPE_CT_P != dev_info.type_s) + if ((dev_config.normal_sleep && DEV_TYPE_CT_P != dev_info.type_s) || DEV_TYPE_BAT == dev_info.type_s) { - if (ADC_ctrl.energy_mode != wl_ctrl.energy_mode_old) - { - /* 模式发生转换并不立即休眠, 将状态发送给服务器后再休眠. */ - wl_ctrl.state = WL_STATE_WAKEUP; - } - else if(ADC_ENERGY_NORMAL == ADC_ctrl.energy_mode - && DEV_TYPE_BAT == dev_info.type_s + + if(DEV_TYPE_BAT == dev_info.type_s && st_data.wave_start && dev_config.is_wave_col != 0 && ADC_ctrl.ADCi_vbat >= 3600) @@ -2007,9 +1997,6 @@ static void _wl_4G_start(void *argument) /* 每次发送数据更新保活时间. */ wl_ctrl.keepalive = HAL_GetTick() + 60000; } - - /* 更新工作模式. */ - wl_ctrl.energy_mode_old = ADC_ctrl.energy_mode; } /* 喂狗. */ @@ -3126,7 +3113,6 @@ void _csg_init_soft(void) wl_ctrl.state = CSG_STATE_CONNECT; wl_ctrl.time_send = 0; wl_ctrl.send_cnt = 0; - wl_ctrl.energy_mode_old = ADC_ctrl.energy_mode; } else if (is_timeout) { diff --git a/CablePositioning_APP_V1.0/EWARM/CableMonitor_APP_V3.2.dep b/CablePositioning_APP_V1.0/EWARM/CableMonitor_APP_V3.2.dep index 3ea5f36..6bb36a9 100644 --- a/CablePositioning_APP_V1.0/EWARM/CableMonitor_APP_V3.2.dep +++ b/CablePositioning_APP_V1.0/EWARM/CableMonitor_APP_V3.2.dep @@ -5,353 +5,353 @@ CableMonitor_APP_V3.2 - $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_i2c_ex.c - $PROJ_DIR$\..\Core\Src\gpio.c - $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_rcc_ex.c - $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_dma_ex.c - $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_pwr.c - $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_pwr_ex.c - $PROJ_DIR$\..\Core\Src\dma.c + $PROJ_DIR$\..\Core\Src\common.c + $PROJ_DIR$\..\Core\Src\adc.c + $PROJ_DIR$\..\Core\Src\ADC_collect.c + $PROJ_DIR$\..\Core\Src\dev_config.c + $PROJ_DIR$\startup_stm32l496xx.s + $PROJ_DIR$\..\Core\Src\cli.c + $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_adc.c + $PROJ_DIR$\..\Core\Src\RS485_debug.c + $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_adc_ex.c $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_cortex.c - $PROJ_DIR$\..\Core\Src\freertos.c - $PROJ_DIR$\..\Core\Src\main.c - $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_dma.c $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_exti.c - $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_gpio.c - $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal.c - $PROJ_DIR$\..\Core\Src\rtc.c $PROJ_DIR$\..\Core\Src\tim.c + $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_dma_ex.c + $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_flash_ex.c + $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_gpio.c + $PROJ_DIR$\..\Core\Src\spi.c + $PROJ_DIR$\..\Core\Src\usart.c + $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_flash.c + $PROJ_DIR$\..\Core\Src\stm32l4xx_hal_msp.c + $PROJ_DIR$\..\Core\Src\position.c $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_flash_ramfunc.c - $PROJ_DIR$\..\Core\Src\stm32l4xx_it.c + $PROJ_DIR$\..\Core\Src\freertos.c $PROJ_DIR$\..\Core\Src\RS485_sensor.c - $PROJ_DIR$\..\Core\Src\wireless.c - $PROJ_DIR$\..\Core\Src\stm32l4xx_hal_msp.c - $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_adc_ex.c - $PROJ_DIR$\..\Core\Src\usart.c - $PROJ_DIR$\..\Core\Src\RS485_debug.c - $PROJ_DIR$\..\Core\Src\spi.c - $PROJ_DIR$\..\Core\Src\system_stm32l4xx.c - $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_adc.c $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_i2c.c - $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_rcc.c - $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_flash.c - $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_flash_ex.c - $PROJ_DIR$\..\Core\Src\adc.c - $PROJ_DIR$\startup_stm32l496xx.s - $PROJ_DIR$\..\Core\Src\cli.c - $PROJ_DIR$\..\Core\Src\common.c - $PROJ_DIR$\..\Core\Src\dev_config.c + $PROJ_DIR$\..\Core\Src\stm32l4xx_it.c + $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_dma.c $PROJ_DIR$\..\Core\Src\flash_if.c - $PROJ_DIR$\..\Core\Src\flash_log.c - $PROJ_DIR$\..\Core\Src\FreeRTOS_CLI.c - $PROJ_DIR$\..\Core\Src\ADC_collect.c + $PROJ_DIR$\..\Core\Src\dma.c + $PROJ_DIR$\..\Core\Src\wireless.c + $PROJ_DIR$\..\Core\Src\gpio.c $PROJ_DIR$\..\Core\Src\recording_wave.c - $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\stm32l4xx_hal_pwr_ex.__cstat.et - $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\stm32l4xx_hal_pwr.pbi - $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\stm32l4xx_hal_i2c_ex.pbi - $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\recording_wave.pbi - $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\dev_config.pbi - $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\stm32l4xx_hal_cortex.pbi - $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\stm32l4xx_hal_tim_ex.o - $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\stm32l4xx_hal_dma.__cstat.et - $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\recording_wave.o - $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\timers.o - $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\croutine.__cstat.et - $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\spi.pbi - $PROJ_DIR$\..\Drivers\CMSIS\Include\mpu_armv7.h - $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\stm32l4xx_hal_uart_ex.__cstat.et - $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\port.o - $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\stm32l4xx_hal_exti.o - $PROJ_DIR$\..\Middlewares\Third_Party\FreeRTOS\Source\include\stack_macros.h - $PROJ_DIR$\..\Middlewares\Third_Party\FreeRTOS\Source\CMSIS_RTOS_V2\freertos_mpool.h - $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\spi.o - $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\stm32l4xx_hal_flash_ex.__cstat.et - $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\stm32l4xx_hal_msp.o - $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\freertos.__cstat.et - $TOOLKIT_DIR$\inc\c\intrinsics.h - $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\stm32l4xx_hal_msp.__cstat.et - $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\stm32l4xx_hal_rtc.pbi - $PROJ_DIR$\..\Drivers\CMSIS\Include\cmsis_version.h - $PROJ_DIR$\..\Core\Inc\flash_if.h - $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\FreeRTOS_CLI.pbi - $TOOLKIT_DIR$\lib\m7M_tls.a - $PROJ_DIR$\stm32l496xx_flash.icf - $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\ADC_collect.__cstat.et - $TOOLKIT_DIR$\inc\c\yvals.h - $TOOLKIT_DIR$\lib\rt7M_tl.a - $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\tasks.__cstat.et - $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\stm32l4xx_hal_gpio.o - $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\system_stm32l4xx.o - $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\RS485_sensor.pbi - $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_adc_ex.h - $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\system_stm32l4xx.__cstat.et - $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\heap_4.o - $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_tim.h - $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\CableMonitor_APP_V3.2.pbd - $TOOLKIT_DIR$\inc\c\DLib_Config_Full.h - $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\event_groups.pbi - $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\stm32l4xx_hal_rtc_ex.__cstat.et - $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\stm32l4xx_hal.pbi - $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\freertos.pbi - $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_pwr_ex.h - $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_adc.h - $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\adc.__cstat.et - $TOOLKIT_DIR$\inc\c\time.h - $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\croutine.o - $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\stm32l4xx_hal_exti.__cstat.et - $TOOLKIT_DIR$\inc\c\ysizet.h - $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_pwr.h + $PROJ_DIR$\..\Core\Src\main.c + $PROJ_DIR$\..\Core\Src\rtc.c + $PROJ_DIR$\..\Core\Src\FreeRTOS_CLI.c + $PROJ_DIR$\..\Core\Src\system_stm32l4xx.c + $PROJ_DIR$\..\Core\Src\flash_log.c + $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal.c + $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\list.__cstat.et + $PROJ_DIR$\..\Core\Inc\main.h + $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\stm32l4xx_hal_pwr.o + $TOOLKIT_DIR$\inc\c\DLib_Product_stdlib.h + $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\RS485_sensor.__cstat.et + $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\stm32l4xx_hal_flash_ramfunc.pbi + $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\stm32l4xx_hal_flash.__cstat.et $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\stm32l4xx_hal_spi_ex.__cstat.et + $TOOLKIT_DIR$\inc\c\ysizet.h + $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\stm32l4xx_hal_exti.__cstat.et + $PROJ_DIR$\..\Core\Inc\RS485_sensor.h + $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\portasm.o + $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\stm32l4xx_hal_spi.__cstat.et + $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_tim_ex.h + $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\tasks.o + $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\stm32l4xx_hal_dma.o + $PROJ_DIR$\..\Core\Inc\cli.h $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\FreeRTOS_CLI.o - $TOOLKIT_DIR$\inc\c\time32.h - $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\stm32l4xx_hal_flash.__cstat.et - $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\stm32l4xx_hal_pwr.o + $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\gpio.pbi + $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\RS485_debug.__cstat.et + $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_pwr.h $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\stm32l4xx_hal_dma_ex.o - $PROJ_DIR$\..\Core\Inc\FreeRTOS_CLI.h - $PROJ_DIR$\..\Core\Inc\RS485_sensor.h - $PROJ_DIR$\..\Middlewares\Third_Party\FreeRTOS\Source\include\queue.h - $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\stm32l4xx_hal_adc.__cstat.et + $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\croutine.o + $TOOLKIT_DIR$\inc\c\time32.h $PROJ_DIR$\..\Middlewares\Third_Party\FreeRTOS\Source\include\semphr.h + $PROJ_DIR$\..\Core\Inc\FreeRTOS_CLI.h $PROJ_DIR$\..\Drivers\CMSIS\Device\ST\STM32L4xx\Include\stm32l4xx.h - $TOOLKIT_DIR$\inc\c\DLib_Product_stdlib.h - $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\list.__cstat.et $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\stm32l4xx_hal_rcc_ex.__cstat.et - $PROJ_DIR$\..\Core\Inc\main.h - $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\RS485_debug.__cstat.et + $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\stm32l4xx_hal_adc.__cstat.et + $PROJ_DIR$\..\Middlewares\Third_Party\FreeRTOS\Source\include\event_groups.h + $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\common.pbi + $PROJ_DIR$\..\Middlewares\Third_Party\FreeRTOS\Source\include\queue.h + $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\flash_log.pbi + $PROJ_DIR$\..\Middlewares\Third_Party\FreeRTOS\Source\include\task.h + $PROJ_DIR$\CableMonitor_APP_V3.2\Exe\CableMonitor_APP_V3.2.bin + $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_exti.h + $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\system_stm32l4xx.pbi + $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\spi.__cstat.et + $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\rtc.o + $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\stm32l4xx_hal_exti.pbi + $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\RS485_sensor.o + $PROJ_DIR$\..\Core\Inc\dev_config.h + $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\cli.__cstat.et + $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\stm32l4xx_hal_rtc_ex.o + $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\main.o + $PROJ_DIR$\..\Middlewares\Third_Party\FreeRTOS\Source\CMSIS_RTOS_V2\freertos_os2.h + $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\stm32l4xx_hal_cortex.__cstat.et + $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\common.o + $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\timers.pbi + $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_i2c_ex.h + $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\flash_log.o + $TOOLKIT_DIR$\inc\c\string.h + $PROJ_DIR$\..\Core\Inc\stm32l4xx_it.h + $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\stm32l4xx_hal_uart.o + $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\flash_if.pbi + $PROJ_DIR$\..\Middlewares\Third_Party\FreeRTOS\Source\CMSIS_RTOS_V2\cmsis_os.h + $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\queue.__cstat.et + $PROJ_DIR$\..\Core\Inc\stm32l4xx_hal_conf.h + $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\stm32l4xx_hal_gpio.__cstat.et + $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\stm32l4xx_hal_msp.pbi + $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\stm32l4xx_hal_dma_ex.pbi + $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\stm32l4xx_hal_i2c_ex.__cstat.et + $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\event_groups.__cstat.et + $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_pwr.c + $PROJ_DIR$\..\Middlewares\Third_Party\FreeRTOS\Source\event_groups.c + $PROJ_DIR$\..\Middlewares\Third_Party\FreeRTOS\Source\list.c + $PROJ_DIR$\..\Middlewares\Third_Party\FreeRTOS\Source\portable\IAR\ARM_CM4F\portasm.s + $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\stm32l4xx_hal_i2c.__cstat.et + $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_spi.c + $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_uart.c + $PROJ_DIR$\..\Middlewares\Third_Party\FreeRTOS\Source\timers.c + $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\cmsis_os2.o + $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\stm32l4xx_hal_adc.pbi + $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\usart.o + $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\port.__cstat.et + $PROJ_DIR$\..\Middlewares\Third_Party\FreeRTOS\Source\include\mpu_wrappers.h + $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\gpio.o + $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_rcc.c + $PROJ_DIR$\..\Middlewares\Third_Party\FreeRTOS\Source\portable\IAR\ARM_CM4F\port.c + $TOOLKIT_DIR$\inc\c\stddef.h + $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_rtc_ex.c + $PROJ_DIR$\..\Middlewares\Third_Party\FreeRTOS\Source\CMSIS_RTOS_V2\cmsis_os2.c + $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_pwr_ex.c + $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_spi_ex.c + $PROJ_DIR$\..\Middlewares\Third_Party\FreeRTOS\Source\portable\MemMang\heap_4.c + $PROJ_DIR$\..\Middlewares\Third_Party\FreeRTOS\Source\croutine.c + $PROJ_DIR$\..\Middlewares\Third_Party\FreeRTOS\Source\stream_buffer.c + $PROJ_DIR$\..\Middlewares\Third_Party\FreeRTOS\Source\queue.c + $PROJ_DIR$\..\Middlewares\Third_Party\FreeRTOS\Source\tasks.c + $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_tim.c + $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_rtc.c + $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_tim_ex.c + $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_rcc_ex.c + $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_uart_ex.c + $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_i2c_ex.c + $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\FreeRTOS_CLI.__cstat.et + $PROJ_DIR$\..\Drivers\CMSIS\Include\cmsis_compiler.h + $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\stm32l4xx_hal_spi_ex.o + $TOOLKIT_DIR$\inc\c\DLib_float_setup.h $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\stm32l4xx_hal_rcc.pbi - $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\gpio.__cstat.et + $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\stm32l4xx_hal_tim.o $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\usart.__cstat.et $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal.h - $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\RS485_sensor.__cstat.et - $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\gpio.pbi - $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\stm32l4xx_hal_flash_ramfunc.pbi $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\stm32l4xx_hal_adc_ex.pbi + $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\rtc.pbi + $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\stm32l4xx_hal.o + $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\gpio.__cstat.et $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Inc\Legacy\stm32_hal_legacy.h + $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\stm32l4xx_hal_tim.__cstat.et $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_uart_ex.h + $PROJ_DIR$\..\Middlewares\Third_Party\FreeRTOS\Source\portable\IAR\ARM_CM4F\portmacro.h + $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\stm32l4xx_hal_rtc_ex.pbi + $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\wireless.pbi + $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_rtc.h + $TOOLKIT_DIR$\inc\c\stdint.h $PROJ_DIR$\..\Core\Inc\spi.h - $PROJ_DIR$\..\Drivers\CMSIS\Device\ST\STM32L4xx\Include\system_stm32l4xx.h - $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\stm32l4xx_hal_tim.__cstat.et - $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\usart.o - $PROJ_DIR$\..\Middlewares\Third_Party\FreeRTOS\Source\include\timers.h - $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\stm32l4xx_hal_tim.o - $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\stm32l4xx_hal_dma_ex.__cstat.et - $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\port.__cstat.et $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\stm32l4xx_hal_dma.pbi - $TOOLKIT_DIR$\inc\c\iar_intrinsics_common.h - $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\wireless.pbi + $PROJ_DIR$\..\Drivers\CMSIS\Device\ST\STM32L4xx\Include\system_stm32l4xx.h $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\tim.pbi $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\stm32l4xx_hal_rtc.o - $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\FreeRTOS_CLI.__cstat.et $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\stm32l4xx_hal_spi.o - $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\stm32l4xx_hal_spi_ex.o - $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\stm32l4xx_hal.o - $PROJ_DIR$\..\Drivers\CMSIS\Include\cmsis_compiler.h - $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\rtc.pbi - $TOOLKIT_DIR$\inc\c\DLib_float_setup.h - $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\stm32l4xx_hal_i2c.__cstat.et - $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\cmsis_os2.o - $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\stm32l4xx_hal_adc.pbi - $TOOLKIT_DIR$\inc\c\stdint.h - $PROJ_DIR$\..\Middlewares\Third_Party\FreeRTOS\Source\include\mpu_wrappers.h - $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\gpio.o - $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_rtc.h + $TOOLKIT_DIR$\inc\c\iar_intrinsics_common.h $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\stm32l4xx_hal_flash_ramfunc.o - $TOOLKIT_DIR$\inc\c\stddef.h - $PROJ_DIR$\..\Middlewares\Third_Party\FreeRTOS\Source\portable\IAR\ARM_CM4F\portmacro.h - $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\stm32l4xx_hal_rtc_ex.pbi + $PROJ_DIR$\..\Middlewares\Third_Party\FreeRTOS\Source\include\timers.h $PROJ_DIR$\..\Core\Inc\flash_log.h - $PROJ_DIR$\..\Core\Inc\cli.h - $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\stm32l4xx_hal_gpio.__cstat.et - $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_exti.h - $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\cli.__cstat.et - $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\stm32l4xx_hal_exti.pbi - $PROJ_DIR$\..\Middlewares\Third_Party\FreeRTOS\Source\include\event_groups.h - $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\flash_log.o - $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\stm32l4xx_hal_msp.pbi - $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\system_stm32l4xx.pbi - $PROJ_DIR$\..\Core\Inc\stm32l4xx_it.h - $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\spi.__cstat.et - $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\common.o - $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\stm32l4xx_hal_dma_ex.pbi - $PROJ_DIR$\..\Middlewares\Third_Party\FreeRTOS\Source\include\task.h - $PROJ_DIR$\..\Middlewares\Third_Party\FreeRTOS\Source\CMSIS_RTOS_V2\cmsis_os.h - $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\rtc.o - $PROJ_DIR$\..\Middlewares\Third_Party\FreeRTOS\Source\CMSIS_RTOS_V2\freertos_os2.h - $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\stm32l4xx_hal_i2c_ex.__cstat.et - $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\event_groups.__cstat.et - $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\tasks.o - $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\flash_if.pbi - $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\stm32l4xx_hal_rtc_ex.o - $PROJ_DIR$\CableMonitor_APP_V3.2\Exe\CableMonitor_APP_V3.2.bin - $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\portasm.o - $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\queue.__cstat.et - $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\stm32l4xx_hal_spi.__cstat.et - $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_tim_ex.h - $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\common.pbi - $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\stm32l4xx_hal_dma.o - $PROJ_DIR$\..\Core\Inc\stm32l4xx_hal_conf.h - $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\flash_log.pbi - $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\stm32l4xx_hal_flash_ramfunc.__cstat.et - $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\stm32l4xx_hal_spi_ex.pbi + $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\stm32l4xx_hal_dma_ex.__cstat.et + $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\stm32l4xx_hal_rcc_ex.pbi + $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\port.pbi + $PROJ_DIR$\..\Core\Inc\common.h + $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\stm32l4xx_hal_i2c.o $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\dma.o - $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\ADC_collect.pbi - $TOOLKIT_DIR$\lib\dl7M_tlf.a $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\wireless.__cstat.et - $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\stm32l4xx_it.__cstat.et - $PROJ_DIR$\..\Drivers\CMSIS\Device\ST\STM32L4xx\Include\stm32l496xx.h + $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\queue.o + $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\stm32l4xx_hal_flash_ramfunc.__cstat.et $PROJ_DIR$\..\Core\Inc\rtc.h - $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\stm32l4xx_hal_rcc_ex.pbi - $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_dma.h - $TOOLKIT_DIR$\inc\c\ycheck.h - $PROJ_DIR$\CableMonitor_APP_V3.2\List\CableMonitor_APP_V3.2.map + $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\stream_buffer.pbi + $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\stm32l4xx_hal_uart.pbi + $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\stm32l4xx_hal_spi_ex.pbi $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\stm32l4xx_hal_uart_ex.pbi - $PROJ_DIR$\..\Core\Inc\common.h - $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\tim.__cstat.et - $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\stm32l4xx_hal_flash_ex.o + $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\stm32l4xx_hal_pwr_ex.__cstat.et + $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\stm32l4xx_hal_i2c_ex.pbi + $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\timers.o + $PROJ_DIR$\..\Drivers\CMSIS\Include\mpu_armv7.h + $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\stm32l4xx_hal_uart_ex.__cstat.et + $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\stm32l4xx_hal_pwr.pbi $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\cmsis_os2.pbi + $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\recording_wave.o + $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\tim.__cstat.et + $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\stream_buffer.__cstat.et + $TOOLKIT_DIR$\lib\dl7M_tlf.a $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\stm32l4xx_hal_rcc.__cstat.et - $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\stm32l4xx_hal_rtc.__cstat.et - $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\stream_buffer.pbi - $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\stm32l4xx_hal_pwr_ex.pbi - $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\stm32l4xx_hal_i2c.o - $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\flash_if.o - $PROJ_DIR$\CableMonitor_APP_V3.2\Exe\CableMonitor_APP_V3.2.out - $PROJ_DIR$\..\Core\Inc\recording_wave.h $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\timers.__cstat.et - $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\stream_buffer.__cstat.et - $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\queue.o - $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\port.pbi - $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\stm32l4xx_hal_uart.pbi - $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\flash_log.__cstat.et - $PROJ_DIR$\..\Middlewares\Third_Party\FreeRTOS\Source\include\stream_buffer.h - $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\main.o - $PROJ_DIR$\..\Core\Inc\ADC_collect.h - $PROJ_DIR$\..\Core\Inc\wireless.h - $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\stm32l4xx_hal_flash_ex.pbi - $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\stm32l4xx_hal_cortex.__cstat.et - $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_rcc.h - $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\croutine.pbi - $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\tasks.pbi - $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\dev_config.o - $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_def.h + $PROJ_DIR$\CableMonitor_APP_V3.2\Exe\CableMonitor_APP_V3.2.out + $PROJ_DIR$\..\Middlewares\Third_Party\FreeRTOS\Source\include\stack_macros.h + $TOOLKIT_DIR$\inc\c\ycheck.h + $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\stm32l4xx_hal_flash_ex.o + $PROJ_DIR$\..\Drivers\CMSIS\Device\ST\STM32L4xx\Include\stm32l496xx.h + $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\ADC_collect.pbi + $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\stm32l4xx_hal_uart_ex.o $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\RS485_debug.pbi + $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\stm32l4xx_hal_pwr_ex.pbi + $TOOLKIT_DIR$\inc\c\stdio.h + $PROJ_DIR$\..\Core\Inc\wireless.h + $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\dma.__cstat.et $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_uart.h + $PROJ_DIR$\..\Core\Inc\usart.h + $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\ADC_collect.o $PROJ_DIR$\..\Core\Inc\dma.h - $TOOLKIT_DIR$\inc\c\string.h - $PROJ_DIR$\..\Core\Inc\dev_config.h + $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_def.h + $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\stm32l4xx_it.__cstat.et + $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_dma.h + $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\stm32l4xx_hal_rtc.__cstat.et + $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\queue.pbi + $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\flash_log.__cstat.et $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\stm32l4xx_it.pbi - $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\stm32l4xx_it.o - $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\timers.pbi + $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\flash_if.o + $PROJ_DIR$\CableMonitor_APP_V3.2\List\CableMonitor_APP_V3.2.map + $PROJ_DIR$\..\Core\Inc\recording_wave.h + $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\croutine.pbi + $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\stm32l4xx_hal_flash_ex.pbi + $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\dev_config.o + $PROJ_DIR$\..\Core\Inc\ADC_collect.h $TOOLKIT_DIR$\inc\c\DLib_Product_string.h - $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\dma.__cstat.et - $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\event_groups.o - $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\RS485_sensor.o - $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_i2c_ex.h - $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\stm32l4xx_hal_uart.o - $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\queue.pbi - $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\ADC_collect.o - $TOOLKIT_DIR$\inc\c\stdio.h - $PROJ_DIR$\..\Core\Inc\usart.h - $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\stm32l4xx_hal_uart_ex.o + $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_rcc.h $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\usart.pbi - $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_flash_ex.h + $PROJ_DIR$\..\Middlewares\Third_Party\FreeRTOS\Source\include\stream_buffer.h + $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\tasks.pbi + $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\event_groups.o + $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\stm32l4xx_it.o + $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\stm32l4xx_hal_gpio.o + $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\ADC_collect.__cstat.et + $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_adc_ex.h + $PROJ_DIR$\..\Middlewares\Third_Party\FreeRTOS\Source\CMSIS_RTOS_V2\freertos_mpool.h + $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\spi.o + $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\stm32l4xx_hal_exti.o + $PROJ_DIR$\stm32l496xx_flash.icf + $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\heap_4.o + $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\croutine.__cstat.et + $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_tim.h + $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\CableMonitor_APP_V3.2.pbd + $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\freertos.pbi + $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\tasks.__cstat.et + $TOOLKIT_DIR$\lib\rt7M_tl.a + $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\stm32l4xx_hal_msp.__cstat.et + $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\dev_config.pbi + $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\port.o + $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\stm32l4xx_hal_cortex.pbi + $TOOLKIT_DIR$\lib\m7M_tls.a + $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\stm32l4xx_hal_rtc.pbi + $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\stm32l4xx_hal_flash_ex.__cstat.et + $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\recording_wave.pbi + $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\stm32l4xx_hal_tim_ex.o + $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\stm32l4xx_hal_dma.__cstat.et + $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\FreeRTOS_CLI.pbi + $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\stm32l4xx_hal_msp.o + $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\spi.pbi + $TOOLKIT_DIR$\inc\c\intrinsics.h + $TOOLKIT_DIR$\inc\c\yvals.h + $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\system_stm32l4xx.o + $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\RS485_sensor.pbi + $PROJ_DIR$\..\Drivers\CMSIS\Include\cmsis_version.h + $PROJ_DIR$\..\Core\Inc\tim.h + $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\cmsis_os2.__cstat.et + $PROJ_DIR$\..\Middlewares\Third_Party\FreeRTOS\Source\include\croutine.h + $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\stm32l4xx_hal_spi.pbi + $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\stm32l4xx_hal.pbi + $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\adc.__cstat.et + $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_pwr_ex.h $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_cortex.h - $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\stm32l4xx_hal_adc_ex.__cstat.et - $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\stm32l4xx_hal_pwr_ex.o $TOOLKIT_DIR$\inc\c\iccarm_builtin.h - $PROJ_DIR$\..\Core\Inc\tim.h + $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\system_stm32l4xx.__cstat.et + $TOOLKIT_DIR$\inc\c\math.h + $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\stm32l4xx_hal_adc.o + $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_adc.h $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\cli.o - $PROJ_DIR$\..\Core\Inc\adc.h - $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\stm32l4xx_hal_i2c_ex.o $PROJ_DIR$\..\Middlewares\Third_Party\FreeRTOS\Source\include\FreeRTOS.h - $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\tim.o - $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_flash.h $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\stm32l4xx_hal_tim.pbi - $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\stm32l4xx_hal_spi.pbi - $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_spi.c - $PROJ_DIR$\..\Middlewares\Third_Party\FreeRTOS\Source\tasks.c - $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\list.pbi - $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_spi_ex.h $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\stm32l4xx_hal_gpio.pbi - $PROJ_DIR$\..\Middlewares\Third_Party\FreeRTOS\Source\CMSIS_RTOS_V2\cmsis_os2.c - $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_uart.c - $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_rtc_ex.c - $PROJ_DIR$\..\Middlewares\Third_Party\FreeRTOS\Source\list.c - $PROJ_DIR$\..\Middlewares\Third_Party\FreeRTOS\Source\portable\IAR\ARM_CM4F\port.c + $TOOLKIT_DIR$\inc\c\DLib_Config_Full.h + $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\cli.pbi + $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\stm32l4xx_hal_rtc_ex.__cstat.et + $PROJ_DIR$\..\Core\Inc\flash_if.h + $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_rcc_ex.h + $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\stm32l4xx_hal_pwr_ex.o $PROJ_DIR$\..\Drivers\CMSIS\Include\cmsis_iccarm.h - $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\stm32l4xx_hal_cortex.o - $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\cli.pbi - $PROJ_DIR$\..\Middlewares\Third_Party\FreeRTOS\Source\timers.c - $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_uart_ex.c - $PROJ_DIR$\..\Middlewares\Third_Party\FreeRTOS\Source\portable\IAR\ARM_CM4F\portasm.s - $TOOLKIT_DIR$\inc\c\stdarg.h - $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\stm32l4xx_hal_adc_ex.o + $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\stm32l4xx_hal_i2c_ex.o + $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\event_groups.pbi + $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_spi_ex.h + $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\tim.o + $TOOLKIT_DIR$\inc\c\time.h + $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_flash_ex.h + $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\freertos.__cstat.et + $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\recording_wave.__cstat.et + $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\RS485_debug.o + $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\main.__cstat.et + $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\dev_config.__cstat.et + $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\stream_buffer.o $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\stm32l4xx_hal_tim_ex.pbi - $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_rtc.c - $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_spi_ex.c - $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_tim.c - $PROJ_DIR$\..\Middlewares\Third_Party\FreeRTOS\Source\event_groups.c - $PROJ_DIR$\..\Middlewares\Third_Party\FreeRTOS\Source\queue.c $TOOLKIT_DIR$\inc\c\DLib_Defaults.h - $TOOLKIT_DIR$\inc\c\math.h - $PROJ_DIR$\..\Middlewares\Third_Party\FreeRTOS\Source\croutine.c - $PROJ_DIR$\..\Middlewares\Third_Party\FreeRTOS\Source\portable\MemMang\heap_4.c - $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_tim_ex.c - $PROJ_DIR$\..\Middlewares\Third_Party\FreeRTOS\Source\stream_buffer.c $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\stm32l4xx_hal_uart.__cstat.et - $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_rcc_ex.h - $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\stm32l4xx_hal_adc.o - $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\stm32l4xx_hal_rcc_ex.o - $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\cmsis_os2.__cstat.et - $PROJ_DIR$\..\Middlewares\Third_Party\FreeRTOS\Source\include\croutine.h - $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\adc.o - $PROJ_DIR$\..\Middlewares\Third_Party\FreeRTOS\Source\include\portable.h - $PROJ_DIR$\..\Core\Inc\gpio.h - $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\RS485_debug.o - $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\list.o + $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_flash.h $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_spi.h - $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_rtc_ex.h - $TOOLKIT_DIR$\lib\shb_l.a - $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\recording_wave.__cstat.et - $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\main.__cstat.et - $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\stm32l4xx_hal_i2c.pbi - $PROJ_DIR$\..\Core\Inc\FreeRTOSConfig.h + $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\stm32l4xx_hal_tim_ex.__cstat.et $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\rtc.__cstat.et - $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\startup_stm32l496xx.o - $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\common.__cstat.et - $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_gpio_ex.h - $PROJ_DIR$\..\Middlewares\Third_Party\FreeRTOS\Source\include\deprecated_definitions.h + $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\stm32l4xx_hal_rcc_ex.o + $PROJ_DIR$\..\Core\Inc\gpio.h + $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\stm32l4xx_hal_cortex.o $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_gpio.h - $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\stm32l4xx_hal_rcc.o + $PROJ_DIR$\..\Core\Inc\adc.h $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\stm32l4xx_hal_pwr.__cstat.et + $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\list.pbi $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\adc.pbi - $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\dev_config.__cstat.et - $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\flash_if.__cstat.et - $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\stm32l4xx_hal.__cstat.et - $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\stm32l4xx_hal_tim_ex.__cstat.et - $TOOLKIT_DIR$\inc\c\stdlib.h - $PROJ_DIR$\..\Middlewares\Third_Party\FreeRTOS\Source\include\projdefs.h - $PROJ_DIR$\..\Middlewares\Third_Party\FreeRTOS\Source\CMSIS_RTOS_V2\cmsis_os2.h + $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\adc.o + $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\stm32l4xx_hal_adc_ex.o + $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\stm32l4xx_hal_adc_ex.__cstat.et $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\dma.pbi - $PROJ_DIR$\..\Core\Inc\RS485_debug.h $TOOLKIT_DIR$\inc\c\DLib_Product.h - $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\stream_buffer.o - $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\stm32l4xx_hal_flash.o - $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\heap_4.__cstat.et + $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\startup_stm32l496xx.o + $TOOLKIT_DIR$\inc\c\stdarg.h + $PROJ_DIR$\..\Core\Inc\RS485_debug.h + $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\flash_if.__cstat.et + $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_gpio_ex.h + $PROJ_DIR$\..\Core\Inc\FreeRTOSConfig.h + $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\stm32l4xx_hal.__cstat.et + $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_i2c.h $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_flash_ramfunc.h - $PROJ_DIR$\..\Drivers\CMSIS\Include\core_cm4.h - $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_ll_adc.h - $PROJ_DIR$\..\Middlewares\Third_Party\FreeRTOS\Source\include\list.h - $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\stm32l4xx_hal_flash.pbi + $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\position.pbi + $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_rtc_ex.h + $PROJ_DIR$\..\Middlewares\Third_Party\FreeRTOS\Source\include\portable.h + $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\stm32l4xx_hal_rcc.o $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\heap_4.pbi + $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\stm32l4xx_hal_flash.pbi + $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\heap_4.__cstat.et + $TOOLKIT_DIR$\lib\shb_l.a + $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\list.o + $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\stm32l4xx_hal_flash.o $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\main.pbi - $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_i2c.h - $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\freertos.o $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\wireless.o - $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\position.pbi - $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\position.__cstat.et + $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\freertos.o + $PROJ_DIR$\..\Drivers\CMSIS\Include\core_cm4.h + $PROJ_DIR$\..\Middlewares\Third_Party\FreeRTOS\Source\include\projdefs.h $PROJ_DIR$\..\Core\Inc\position.h - $PROJ_DIR$\..\Core\Src\position.c + $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\position.__cstat.et + $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_ll_adc.h + $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\stm32l4xx_hal_i2c.pbi + $PROJ_DIR$\..\Middlewares\Third_Party\FreeRTOS\Source\CMSIS_RTOS_V2\cmsis_os2.h + $PROJ_DIR$\..\Middlewares\Third_Party\FreeRTOS\Source\include\deprecated_definitions.h + $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\common.__cstat.et + $PROJ_DIR$\..\Middlewares\Third_Party\FreeRTOS\Source\include\list.h + $TOOLKIT_DIR$\inc\c\stdlib.h $PROJ_DIR$\CableMonitor_APP_V3.2\Obj\position.o @@ -359,1087 +359,1080 @@ ILINK - 210 198 + 189 213 - $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_i2c_ex.c + $PROJ_DIR$\..\Core\Src\common.c ICCARM - 257 + 84 - __cstat - 172 + BICOMP + 67 - BICOMP - 43 + __cstat + 344 ICCARM - 116 184 224 228 107 193 334 146 197 72 287 83 329 66 140 273 253 53 124 121 151 94 294 316 314 196 250 89 335 78 157 260 249 333 340 241 95 88 149 305 304 266 81 181 230 122 + 198 191 254 295 275 313 45 88 219 202 38 139 94 220 205 63 193 336 151 257 133 281 266 179 154 144 116 279 304 318 207 265 270 340 228 72 297 287 322 321 86 57 264 150 324 298 284 235 50 201 146 272 319 337 325 343 147 253 158 112 70 345 92 342 171 286 60 165 78 161 53 BICOMP - 314 72 334 197 333 228 107 116 146 305 184 294 151 53 253 94 335 78 224 316 196 250 89 157 260 340 95 149 304 81 230 121 193 124 66 140 287 83 329 273 241 266 181 122 249 88 + 205 191 321 133 151 165 254 265 235 281 324 272 219 304 72 150 193 63 322 315 92 53 45 220 207 270 297 57 298 201 144 154 257 70 38 88 202 171 78 161 295 275 313 139 94 279 116 336 179 266 86 284 50 146 337 147 112 60 198 318 340 228 287 264 319 325 343 253 158 345 342 286 - $PROJ_DIR$\..\Core\Src\gpio.c + $PROJ_DIR$\..\Core\Src\adc.c ICCARM - 148 + 309 - __cstat - 114 + BICOMP + 308 - BICOMP - 118 + __cstat + 263 ICCARM - 301 111 116 184 224 228 107 193 334 146 197 72 287 83 329 66 140 273 253 53 124 121 151 94 294 316 314 196 250 89 335 78 157 260 249 333 340 241 95 88 149 305 304 266 81 181 230 122 + 305 38 139 94 220 205 63 193 336 151 191 254 295 275 313 257 133 281 266 179 154 144 116 45 279 304 318 207 265 270 340 228 72 297 287 322 321 86 57 264 150 324 298 284 235 50 201 146 165 92 272 319 337 325 343 147 253 158 112 70 345 342 218 BICOMP - 107 228 116 146 333 334 197 72 314 305 184 294 151 53 253 94 335 78 111 224 316 196 250 89 157 260 340 95 149 304 81 230 121 193 124 66 140 287 83 329 273 241 266 181 122 301 249 88 + 205 150 304 193 325 158 72 151 70 38 265 321 235 133 313 281 191 63 218 220 207 270 297 57 298 201 144 154 257 295 275 254 287 116 165 139 94 279 336 179 266 45 318 340 228 264 319 343 253 345 305 322 86 324 284 50 146 92 272 342 337 147 112 - $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_rcc_ex.c + $PROJ_DIR$\..\Core\Src\ADC_collect.c ICCARM - 296 + 203 - __cstat - 110 + BICOMP + 194 - BICOMP - 195 + __cstat + 227 ICCARM - 116 184 224 228 107 193 334 146 197 72 287 83 329 66 140 273 253 53 124 121 151 94 294 316 314 196 250 89 335 78 157 260 249 333 340 241 95 88 149 305 304 266 81 181 230 122 + 198 191 254 295 275 313 45 346 40 88 219 268 135 152 38 139 94 220 205 63 193 336 151 257 133 281 266 179 154 144 116 279 304 318 207 265 270 340 228 72 297 287 322 321 86 57 264 150 324 298 284 235 50 201 146 305 258 165 92 272 319 337 325 343 147 253 158 112 70 345 342 78 161 47 218 338 BICOMP - 314 72 334 197 333 228 107 116 146 305 184 294 151 53 253 94 335 78 224 316 196 250 89 157 260 340 95 149 304 81 230 121 193 124 66 140 287 83 329 273 241 266 181 122 249 88 + 40 151 266 139 205 295 254 94 228 78 275 63 45 112 272 38 152 338 191 336 179 287 88 258 218 313 219 135 279 116 340 342 337 147 70 165 346 268 305 47 161 220 304 207 265 270 72 297 321 57 150 298 235 201 144 193 154 257 133 318 264 92 198 281 322 86 324 284 50 146 319 325 343 253 158 345 - $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_dma_ex.c + $PROJ_DIR$\..\Core\Src\dev_config.c ICCARM - 101 + 217 - __cstat - 129 + BICOMP + 241 - BICOMP - 167 + __cstat + 292 ICCARM - 116 184 224 228 107 193 334 146 197 72 287 83 329 66 140 273 253 53 124 121 151 94 294 316 314 196 250 89 335 78 157 260 249 333 340 241 95 88 149 305 304 266 81 181 230 122 + 88 191 254 295 275 313 45 219 198 38 139 94 220 205 63 193 336 151 257 133 281 266 179 154 144 116 279 304 318 207 265 270 340 228 72 297 287 322 321 86 57 264 150 324 298 284 235 50 201 146 92 272 319 337 325 343 147 253 158 112 70 345 342 165 78 161 278 BICOMP - 157 316 149 193 333 250 340 81 140 329 273 197 228 107 305 224 196 89 260 95 304 230 121 124 66 287 83 146 72 184 294 151 116 334 53 253 94 314 335 78 241 266 181 122 249 88 + 270 284 254 45 201 116 220 57 154 205 146 165 295 275 207 297 298 144 257 191 151 319 343 38 278 313 304 265 72 321 150 235 193 133 281 86 50 253 345 70 198 92 78 161 219 139 94 279 63 336 179 266 322 324 325 158 88 318 340 228 287 264 272 342 337 147 112 - $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_pwr.c + $PROJ_DIR$\startup_stm32l496xx.s - ICCARM - 100 - - - __cstat - 318 - - - BICOMP - 42 + AARM + 314 - - - ICCARM - 116 184 224 228 107 193 334 146 197 72 287 83 329 66 140 273 253 53 124 121 151 94 294 316 314 196 250 89 335 78 157 260 249 333 340 241 95 88 149 305 304 266 81 181 230 122 - - - BICOMP - 340 140 273 228 250 81 329 197 107 333 316 157 149 193 305 224 196 89 260 95 304 230 121 124 66 287 83 146 72 184 294 151 116 334 53 253 94 314 335 78 241 266 181 122 249 88 - - - $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_pwr_ex.c + $PROJ_DIR$\..\Core\Src\cli.c ICCARM - 252 + 271 - __cstat - 41 + BICOMP + 276 - BICOMP - 207 + __cstat + 79 ICCARM - 116 184 224 228 107 193 334 146 197 72 287 83 329 66 140 273 253 53 124 121 151 94 294 316 314 196 250 89 335 78 157 260 249 333 340 241 95 88 149 305 304 266 81 181 230 122 + 198 191 254 295 275 313 45 88 219 286 60 38 139 94 220 205 63 193 336 151 257 133 281 266 179 154 144 116 279 304 318 207 265 270 340 228 72 297 287 322 321 86 57 264 150 324 298 284 235 50 201 146 272 319 337 325 343 147 253 158 112 70 345 92 342 202 258 171 165 78 161 62 53 278 199 47 218 316 214 338 BICOMP - 193 316 149 157 333 250 340 81 140 329 273 197 228 107 305 224 196 89 260 95 304 230 121 124 66 287 83 146 72 184 294 151 116 334 53 253 94 314 335 78 241 266 181 122 249 88 + 205 254 139 38 199 116 202 191 324 78 214 295 275 279 151 179 266 63 322 165 272 92 70 315 171 53 218 338 45 313 60 94 336 88 286 258 62 278 47 316 161 219 220 304 207 265 270 72 297 321 57 150 298 235 201 144 193 154 257 133 281 86 284 50 146 337 147 112 198 318 340 228 287 264 319 325 343 253 158 345 342 - $PROJ_DIR$\..\Core\Src\dma.c + $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_adc.c ICCARM - 188 + 269 - __cstat - 238 + BICOMP + 109 - BICOMP - 327 + __cstat + 65 ICCARM - 231 111 116 184 224 228 107 193 334 146 197 72 287 83 329 66 140 273 253 53 124 121 151 94 294 316 314 196 250 89 335 78 157 260 249 333 340 241 95 88 149 305 304 266 81 181 230 122 + 139 94 220 205 63 193 336 151 191 254 295 275 313 257 133 281 266 179 154 144 116 45 279 304 318 207 265 270 340 228 72 297 287 322 321 86 57 264 150 324 298 284 235 50 201 146 BICOMP - 340 140 273 228 250 81 329 197 107 333 111 316 157 149 193 305 116 224 196 89 260 95 304 230 121 124 66 287 83 146 72 184 294 151 334 53 253 94 314 335 78 241 266 181 122 231 249 88 + 279 45 151 179 266 205 340 322 94 116 254 228 324 63 139 336 191 318 220 304 207 265 270 72 297 321 57 150 298 235 201 144 193 154 257 133 295 275 313 281 86 284 50 146 287 264 - $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_cortex.c + $PROJ_DIR$\..\Core\Src\RS485_debug.c ICCARM - 274 + 290 - __cstat - 223 + BICOMP + 196 - BICOMP - 46 + __cstat + 56 ICCARM - 116 184 224 228 107 193 334 146 197 72 287 83 329 66 140 273 253 53 124 121 151 94 294 316 314 196 250 89 335 78 157 260 249 333 340 241 95 88 149 305 304 266 81 181 230 122 + 198 191 254 295 275 313 45 88 219 202 38 139 94 220 205 63 193 336 151 257 133 281 266 179 154 144 116 279 304 318 207 265 270 340 228 72 297 287 322 321 86 57 264 150 324 298 284 235 50 201 146 165 92 272 319 337 325 343 147 253 158 112 70 345 342 78 161 316 218 199 278 47 214 338 BICOMP - 340 140 273 228 250 81 329 197 107 333 316 157 149 193 305 224 196 89 260 95 304 230 121 124 66 287 83 146 72 184 294 151 116 334 53 253 94 314 335 78 241 266 181 122 249 88 + 150 151 38 304 193 278 191 72 254 92 78 338 45 265 321 235 205 272 202 218 214 219 220 207 270 297 57 298 201 144 154 257 63 322 324 165 70 88 316 199 47 161 295 275 313 139 94 279 116 336 133 281 86 284 50 146 342 337 147 112 266 198 179 318 340 228 287 264 319 325 343 253 158 345 - $PROJ_DIR$\..\Core\Src\freertos.c + $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_adc_ex.c ICCARM - 341 + 310 - __cstat - 62 + BICOMP + 140 - BICOMP - 87 + __cstat + 311 ICCARM - 258 151 197 72 287 83 329 94 146 310 325 300 315 152 63 253 132 147 168 336 111 116 184 224 228 107 193 334 66 140 273 53 124 121 294 316 314 196 250 89 335 78 157 260 249 333 340 241 95 88 149 305 304 266 81 181 230 122 169 326 + 139 94 220 205 63 193 336 151 191 254 295 275 313 257 133 281 266 179 154 144 116 45 279 304 318 207 265 270 340 228 72 297 287 322 321 86 57 264 150 324 298 284 235 50 201 146 BICOMP - 151 116 197 72 132 228 107 333 146 325 287 83 294 53 305 111 94 329 315 63 336 184 334 273 253 168 169 310 300 152 147 224 316 196 250 89 157 260 340 95 149 304 81 230 121 193 124 66 140 314 241 266 181 122 258 335 78 249 88 326 + 340 279 151 179 266 45 205 322 94 116 254 228 324 63 139 336 191 318 220 304 207 265 270 72 297 321 57 150 298 235 201 144 193 154 257 133 295 275 313 281 86 284 50 146 287 264 - $PROJ_DIR$\..\Core\Src\main.c + $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_cortex.c ICCARM - 219 + 303 - __cstat - 308 + BICOMP + 243 - BICOMP - 339 + __cstat + 83 ICCARM - 111 116 184 224 228 107 193 334 146 197 72 287 83 329 66 140 273 253 53 124 121 151 94 294 316 314 196 250 89 335 78 157 260 249 333 340 241 95 88 149 305 304 266 81 181 230 122 169 258 310 325 300 315 152 63 132 147 168 336 326 256 231 194 91 98 123 254 246 301 - - - BICOMP - 340 140 273 228 181 301 250 81 329 197 107 98 194 316 157 149 193 241 147 91 256 254 224 196 89 260 95 304 230 121 124 66 287 83 146 72 266 122 325 152 253 94 169 231 123 246 116 184 294 151 334 53 314 335 78 333 305 168 111 249 88 258 326 310 300 315 63 132 336 + 139 94 220 205 63 193 336 151 191 254 295 275 313 257 133 281 266 179 154 144 116 45 279 304 318 207 265 270 340 228 72 297 287 322 321 86 57 264 150 324 298 284 235 50 201 146 - $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_dma.c + $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_exti.c ICCARM - 183 + 231 - __cstat - 48 + BICOMP + 76 - BICOMP - 131 + __cstat + 46 ICCARM - 116 184 224 228 107 193 334 146 197 72 287 83 329 66 140 273 253 53 124 121 151 94 294 316 314 196 250 89 335 78 157 260 249 333 340 241 95 88 149 305 304 266 81 181 230 122 + 139 94 220 205 63 193 336 151 191 254 295 275 313 257 133 281 266 179 154 144 116 45 279 304 318 207 265 270 340 228 72 297 287 322 321 86 57 264 150 324 298 284 235 50 201 146 BICOMP - 184 151 72 228 78 333 294 146 53 253 94 335 305 107 116 334 197 314 224 316 196 250 89 157 260 340 95 149 304 81 230 121 193 124 66 140 287 83 329 273 241 266 181 122 249 88 + 139 151 205 63 322 336 191 254 318 324 94 279 116 179 266 45 340 228 220 304 207 265 270 72 297 321 57 150 298 235 201 144 193 154 257 133 295 275 313 281 86 284 50 146 287 264 - $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_exti.c + $PROJ_DIR$\..\Core\Src\tim.c ICCARM - 56 + 285 - __cstat - 93 + BICOMP + 155 - BICOMP - 159 + __cstat + 184 ICCARM - 116 184 224 228 107 193 334 146 197 72 287 83 329 66 140 273 253 53 124 121 151 94 294 316 314 196 250 89 335 78 157 260 249 333 340 241 95 88 149 305 304 266 81 181 230 122 + 258 38 139 94 220 205 63 193 336 151 191 254 295 275 313 257 133 281 266 179 154 144 116 45 279 304 318 207 265 270 340 228 72 297 287 322 321 86 57 264 150 324 298 284 235 50 201 146 165 92 272 319 337 325 343 147 253 158 112 70 345 342 78 161 218 BICOMP - 116 146 228 107 333 334 197 72 314 305 184 294 151 53 253 94 335 78 224 316 196 250 89 157 260 340 95 149 304 81 230 121 193 124 66 140 287 83 329 273 241 266 181 122 249 88 + 38 325 158 139 116 254 205 287 70 279 151 179 266 45 340 228 78 94 63 336 191 318 165 218 220 304 207 265 270 72 297 321 57 150 298 235 201 144 193 154 257 133 295 275 313 281 264 319 343 253 345 161 258 322 86 324 284 50 146 92 272 342 337 147 112 - $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_gpio.c + $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_dma_ex.c ICCARM - 75 + 58 - __cstat - 156 + BICOMP + 97 - BICOMP - 267 + __cstat + 162 ICCARM - 116 184 224 228 107 193 334 146 197 72 287 83 329 66 140 273 253 53 124 121 151 94 294 316 314 196 250 89 335 78 157 260 249 333 340 241 95 88 149 305 304 266 81 181 230 122 + 139 94 220 205 63 193 336 151 191 254 295 275 313 257 133 281 266 179 154 144 116 45 279 304 318 207 265 270 340 228 72 297 287 322 321 86 57 264 150 324 298 284 235 50 201 146 BICOMP - 81 250 329 197 107 340 140 273 228 333 316 157 149 193 305 224 196 89 260 95 304 230 121 124 66 287 83 146 72 184 294 151 116 334 53 253 94 314 335 78 241 266 181 122 249 88 + 72 304 150 193 322 265 321 235 133 313 281 191 205 63 324 220 207 270 297 57 298 201 144 154 257 295 275 151 254 94 279 116 139 336 179 266 45 318 340 228 86 284 50 146 287 264 - $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal.c + $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_flash_ex.c ICCARM - 139 + 192 - __cstat - 322 + BICOMP + 216 - BICOMP - 86 + __cstat + 246 ICCARM - 116 184 224 228 107 193 334 146 197 72 287 83 329 66 140 273 253 53 124 121 151 94 294 316 314 196 250 89 335 78 157 260 249 333 340 241 95 88 149 305 304 266 81 181 230 122 + 139 94 220 205 63 193 336 151 191 254 295 275 313 257 133 281 266 179 154 144 116 45 279 304 318 207 265 270 340 228 72 297 287 322 321 86 57 264 150 324 298 284 235 50 201 146 BICOMP - 157 316 149 193 333 250 340 81 140 329 273 197 228 107 305 224 196 89 260 95 304 230 121 124 66 287 83 146 72 184 294 151 116 334 53 253 94 314 335 78 241 266 181 122 249 88 + 254 318 336 191 322 205 63 139 151 324 94 279 116 179 266 45 340 228 220 304 207 265 270 72 297 321 57 150 298 235 201 144 193 154 257 133 295 275 313 281 86 284 50 146 287 264 - $PROJ_DIR$\..\Core\Src\rtc.c + $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_gpio.c ICCARM - 170 + 226 - __cstat - 311 + BICOMP + 274 - BICOMP - 141 + __cstat + 95 ICCARM - 194 111 116 184 224 228 107 193 334 146 197 72 287 83 329 66 140 273 253 53 124 121 151 94 294 316 314 196 250 89 335 78 157 260 249 333 340 241 95 88 149 305 304 266 81 181 230 122 91 98 + 139 94 220 205 63 193 336 151 191 254 295 275 313 257 133 281 266 179 154 144 116 45 279 304 318 207 265 270 340 228 72 297 287 322 321 86 57 264 150 324 298 284 235 50 201 146 BICOMP - 116 146 249 228 107 334 197 72 314 98 111 184 294 151 53 253 94 335 78 91 224 316 196 250 89 157 260 340 95 149 304 81 230 121 193 124 66 140 287 83 329 273 88 194 333 241 305 266 181 122 + 235 265 313 191 63 321 133 281 205 322 304 72 150 193 324 220 207 270 297 57 298 201 144 154 257 295 275 151 254 94 279 116 139 336 179 266 45 318 340 228 86 284 50 146 287 264 - $PROJ_DIR$\..\Core\Src\tim.c + $PROJ_DIR$\..\Core\Src\spi.c ICCARM - 259 + 230 - __cstat - 201 + BICOMP + 252 - BICOMP - 134 + __cstat + 74 ICCARM - 254 111 116 184 224 228 107 193 334 146 197 72 287 83 329 66 140 273 253 53 124 121 151 94 294 316 314 196 250 89 335 78 157 260 249 333 340 241 95 88 149 305 304 266 81 181 230 122 200 169 258 310 325 300 315 152 63 132 147 168 336 326 233 154 220 + 152 38 139 94 220 205 63 193 336 151 191 254 295 275 313 257 133 281 266 179 154 144 116 45 279 304 318 207 265 270 340 228 72 297 287 322 321 86 57 264 150 324 298 284 235 50 201 146 + + + BICOMP + 270 205 201 254 220 57 154 322 139 207 297 298 144 257 191 295 275 151 324 38 304 265 72 321 150 235 193 133 313 281 63 94 279 116 336 179 266 45 318 340 228 86 284 50 146 152 287 264 - $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_flash_ramfunc.c + $PROJ_DIR$\..\Core\Src\usart.c ICCARM - 150 + 110 - __cstat - 186 + BICOMP + 221 - BICOMP - 119 + __cstat + 138 ICCARM - 116 184 224 228 107 193 334 146 197 72 287 83 329 66 140 273 253 53 124 121 151 94 294 316 314 196 250 89 335 78 157 260 249 333 340 241 95 88 149 305 304 266 81 181 230 122 + 202 38 139 94 220 205 63 193 336 151 191 254 295 275 313 257 133 281 266 179 154 144 116 45 279 304 318 207 265 270 340 228 72 297 287 322 321 86 57 264 150 324 298 284 235 50 201 146 88 219 165 92 272 319 337 325 343 147 253 158 112 70 345 342 78 161 199 47 316 53 218 338 BICOMP - 184 151 72 228 78 333 294 146 53 253 94 335 305 107 116 334 197 314 224 316 196 250 89 157 260 340 95 149 304 81 230 121 193 124 66 140 287 83 329 273 241 266 181 122 249 88 + 116 70 139 254 218 205 151 199 38 279 179 266 45 318 92 165 316 94 63 336 191 264 272 88 78 47 53 338 220 304 207 265 270 72 297 321 57 150 298 235 201 144 193 154 257 133 295 275 313 281 340 228 287 219 342 337 147 112 202 322 86 324 284 50 146 319 325 343 253 158 345 161 315 - $PROJ_DIR$\..\Core\Src\stm32l4xx_it.c + $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_flash.c ICCARM - 235 + 332 - __cstat - 192 + BICOMP + 328 - BICOMP - 234 + __cstat + 43 ICCARM - 111 116 184 224 228 107 193 334 146 197 72 287 83 329 66 140 273 253 53 124 121 151 94 294 316 314 196 250 89 335 78 157 260 249 333 340 241 95 88 149 305 304 266 81 181 230 122 164 258 310 325 300 315 152 63 132 147 168 336 + 139 94 220 205 63 193 336 151 191 254 295 275 313 257 133 281 266 179 154 144 116 45 279 304 318 207 265 270 340 228 72 297 287 322 321 86 57 264 150 324 298 284 235 50 201 146 BICOMP - 228 121 325 260 197 287 146 88 116 196 304 66 83 224 89 95 230 124 72 258 316 250 157 340 149 81 193 140 329 273 107 164 168 184 294 151 334 53 253 94 314 335 78 249 315 63 111 333 241 305 266 181 122 310 300 152 147 132 336 + 321 133 281 205 265 235 313 191 63 322 304 72 150 193 324 220 207 270 297 57 298 201 144 154 257 295 275 151 254 94 279 116 139 336 179 266 45 318 340 228 86 284 50 146 287 264 - $PROJ_DIR$\..\Core\Src\RS485_sensor.c + $PROJ_DIR$\..\Core\Src\stm32l4xx_hal_msp.c ICCARM - 240 + 251 - __cstat - 117 + BICOMP + 96 - BICOMP - 77 + __cstat + 240 ICCARM - 245 197 72 287 83 329 94 232 237 246 111 116 184 224 228 107 193 334 146 66 140 273 253 53 124 121 151 294 316 314 196 250 89 335 78 157 260 249 333 340 241 95 88 149 305 304 266 81 181 230 122 200 169 258 310 325 300 315 152 63 132 147 168 336 326 233 154 103 + 38 139 94 220 205 63 193 336 151 191 254 295 275 313 257 133 281 266 179 154 144 116 45 279 304 318 207 265 270 340 228 72 297 287 322 321 86 57 264 150 324 298 284 235 50 201 146 + + + BICOMP + 220 57 154 254 205 270 201 322 139 207 297 298 144 257 191 295 275 151 324 304 265 72 321 150 235 193 133 313 281 63 94 279 116 336 179 266 45 318 340 228 86 284 50 146 38 287 264 - $PROJ_DIR$\..\Core\Src\wireless.c + $PROJ_DIR$\..\Core\Src\position.c ICCARM - 342 + 347 - __cstat - 191 + BICOMP + 323 - BICOMP - 133 + __cstat + 339 ICCARM - 245 197 72 287 83 329 94 232 237 91 98 246 111 116 184 224 228 107 193 334 146 66 140 273 253 53 124 121 151 294 316 314 196 250 89 335 78 157 260 249 333 340 241 95 88 149 305 304 266 81 181 230 122 256 254 194 200 169 258 310 325 300 315 152 63 132 147 168 336 326 221 233 154 220 103 211 67 328 345 + 198 191 254 295 275 313 45 88 219 202 38 139 94 220 205 63 193 336 151 257 133 281 266 179 154 144 116 279 304 318 207 265 270 340 228 72 297 287 322 321 86 57 264 150 324 298 284 235 50 201 146 78 165 92 272 319 337 325 343 147 253 158 112 70 345 342 161 218 338 278 BICOMP - 151 345 72 253 221 197 334 94 228 88 146 256 211 184 107 116 53 168 91 194 220 328 237 294 314 300 132 111 258 232 246 254 200 233 103 67 154 287 83 329 98 224 316 196 250 89 157 260 340 95 149 304 81 230 121 193 124 335 78 249 310 315 63 336 169 245 66 140 273 333 241 305 266 181 122 326 325 152 147 + 151 179 279 38 205 313 266 116 218 45 254 139 165 202 278 191 295 275 94 63 336 322 324 70 325 158 92 88 78 338 219 220 304 207 265 270 72 297 321 57 150 298 235 201 144 193 154 257 133 281 86 284 50 146 319 343 253 345 272 198 318 340 228 287 264 161 342 337 147 112 - $PROJ_DIR$\..\Core\Src\stm32l4xx_hal_msp.c + $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_flash_ramfunc.c ICCARM - 61 + 159 - __cstat - 64 + BICOMP + 42 - BICOMP - 162 + __cstat + 170 ICCARM - 111 116 184 224 228 107 193 334 146 197 72 287 83 329 66 140 273 253 53 124 121 151 94 294 316 314 196 250 89 335 78 157 260 249 333 340 241 95 88 149 305 304 266 81 181 230 122 + 139 94 220 205 63 193 336 151 191 254 295 275 313 257 133 281 266 179 154 144 116 45 279 304 318 207 265 270 340 228 72 297 287 322 321 86 57 264 150 324 298 284 235 50 201 146 BICOMP - 224 95 124 72 228 89 230 333 116 196 260 304 121 66 197 287 83 146 305 316 250 157 340 149 81 193 140 329 273 107 184 294 151 334 53 253 94 314 335 78 241 266 181 122 111 249 88 + 94 116 254 205 228 322 279 151 179 266 45 340 324 63 139 336 191 318 220 304 207 265 270 72 297 321 57 150 298 235 201 144 193 154 257 133 295 275 313 281 86 284 50 146 287 264 - $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_adc_ex.c + $PROJ_DIR$\..\Core\Src\freertos.c ICCARM - 280 + 335 - __cstat - 251 + BICOMP + 237 - BICOMP - 120 + __cstat + 288 ICCARM - 116 184 224 228 107 193 334 146 197 72 287 83 329 66 140 273 253 53 124 121 151 94 294 316 314 196 250 89 335 78 157 260 249 333 340 241 95 88 149 305 304 266 81 181 230 122 + 272 116 191 254 295 275 313 45 151 319 337 325 343 147 253 266 158 112 70 345 38 139 94 220 205 63 193 336 257 133 281 179 154 144 279 304 318 207 265 270 340 228 72 297 287 322 321 86 57 264 150 324 298 284 235 50 201 146 92 342 BICOMP - 335 294 146 53 253 94 228 333 184 151 72 78 305 107 116 334 197 314 224 316 196 250 89 157 260 340 95 149 304 81 230 121 193 124 66 140 287 83 329 273 241 266 181 122 249 88 + 116 139 191 254 158 205 63 322 151 337 295 275 279 179 324 38 45 313 343 253 345 94 336 281 266 70 92 319 325 147 112 220 304 207 265 270 72 297 321 57 150 298 235 201 144 193 154 257 133 318 86 284 50 146 272 340 228 287 264 342 - $PROJ_DIR$\..\Core\Src\usart.c + $PROJ_DIR$\..\Core\Src\RS485_sensor.c ICCARM - 126 + 77 - __cstat - 115 + BICOMP + 256 - BICOMP - 248 + __cstat + 41 ICCARM - 246 111 116 184 224 228 107 193 334 146 197 72 287 83 329 66 140 273 253 53 124 121 151 94 294 316 314 196 250 89 335 78 157 260 249 333 340 241 95 88 149 305 304 266 81 181 230 122 232 237 200 169 258 310 325 300 315 152 63 132 147 168 336 326 233 154 221 103 328 155 220 345 + 198 191 254 295 275 313 45 88 219 202 38 139 94 220 205 63 193 336 151 257 133 281 266 179 154 144 116 279 304 318 207 265 270 340 228 72 297 287 322 321 86 57 264 150 324 298 284 235 50 201 146 165 92 272 319 337 325 343 147 253 158 112 70 345 342 78 161 47 BICOMP - 89 230 72 228 220 224 95 124 221 196 260 304 121 66 197 287 83 146 88 94 147 168 111 200 328 316 250 157 340 149 81 193 140 329 273 314 169 258 326 325 152 253 232 233 103 155 345 116 184 294 107 151 334 53 335 78 249 237 246 333 241 305 266 181 122 310 300 315 63 132 336 154 279 + 207 257 151 191 298 254 297 144 92 78 219 220 270 57 201 154 205 38 202 45 304 265 72 321 150 235 193 133 281 63 322 324 165 272 88 47 295 275 313 139 94 279 116 336 179 266 86 284 50 146 342 337 147 112 198 318 340 228 287 264 70 319 325 343 253 158 345 161 - $PROJ_DIR$\..\Core\Src\RS485_debug.c + $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_i2c.c ICCARM - 302 + 166 - __cstat - 112 + BICOMP + 341 - BICOMP - 229 + __cstat + 104 ICCARM - 245 197 72 287 83 329 94 232 237 246 111 116 184 224 228 107 193 334 146 66 140 273 253 53 124 121 151 294 316 314 196 250 89 335 78 157 260 249 333 340 241 95 88 149 305 304 266 81 181 230 122 200 169 258 310 325 300 315 152 63 132 147 168 336 326 233 154 328 220 221 67 103 211 + 139 94 220 205 63 193 336 151 191 254 295 275 313 257 133 281 266 179 154 144 116 45 279 304 318 207 265 270 340 228 72 297 287 322 321 86 57 264 150 324 298 284 235 50 201 146 BICOMP - 149 111 316 193 197 335 228 146 67 329 157 151 233 94 72 250 340 81 310 315 246 220 211 287 83 224 196 89 260 95 304 230 121 124 78 249 63 336 154 258 232 200 328 221 103 237 116 184 294 107 334 53 253 314 88 168 300 132 169 245 66 140 273 333 241 305 266 181 122 326 325 152 147 + 150 304 193 205 72 265 321 235 133 313 281 191 63 284 146 220 207 270 297 57 298 201 144 154 257 295 275 151 254 86 50 94 279 116 139 336 179 266 45 318 340 228 322 324 287 264 - $PROJ_DIR$\..\Core\Src\spi.c + $PROJ_DIR$\..\Core\Src\stm32l4xx_it.c ICCARM - 59 + 225 - __cstat - 165 + BICOMP + 211 - BICOMP - 52 + __cstat + 206 ICCARM - 123 111 116 184 224 228 107 193 334 146 197 72 287 83 329 66 140 273 253 53 124 121 151 94 294 316 314 196 250 89 335 78 157 260 249 333 340 241 95 88 149 305 304 266 81 181 230 122 + 38 139 94 220 205 63 193 336 151 191 254 295 275 313 257 133 281 266 179 154 144 116 45 279 304 318 207 265 270 340 228 72 297 287 322 321 86 57 264 150 324 298 284 235 50 201 146 89 272 319 337 325 343 147 253 158 112 70 345 BICOMP - 89 228 230 72 224 95 124 333 116 196 260 304 121 66 197 287 83 146 305 111 316 250 157 340 149 81 193 140 329 273 107 184 294 151 334 53 253 94 314 335 78 241 266 181 122 123 249 88 + 72 322 304 150 193 265 321 235 133 313 281 191 205 63 324 112 272 220 207 270 297 57 298 201 144 154 257 295 275 151 254 337 147 266 89 70 139 94 279 116 336 179 45 318 340 228 86 284 50 146 38 287 264 319 325 343 253 158 345 - $PROJ_DIR$\..\Core\Src\system_stm32l4xx.c + $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_dma.c ICCARM - 76 + 52 - __cstat - 79 + BICOMP + 153 - BICOMP - 163 + __cstat + 249 ICCARM - 107 193 334 146 197 72 287 83 329 66 140 273 253 53 124 116 184 224 228 121 151 94 294 316 314 196 250 89 335 78 157 260 249 333 340 241 95 88 149 305 304 266 81 181 230 122 + 139 94 220 205 63 193 336 151 191 254 295 275 313 257 133 281 266 179 154 144 116 45 279 304 318 207 265 270 340 228 72 297 287 322 321 86 57 264 150 324 298 284 235 50 201 146 BICOMP - 314 116 146 294 72 197 333 334 184 151 228 305 53 253 107 94 335 78 193 124 66 140 287 83 329 273 224 316 196 250 89 157 260 340 95 149 304 81 230 121 241 266 181 122 249 88 + 94 116 254 205 228 322 279 151 179 266 45 340 324 63 139 336 191 318 220 304 207 265 270 72 297 321 57 150 298 235 201 144 193 154 257 133 295 275 313 281 86 284 50 146 287 264 - $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_adc.c + $PROJ_DIR$\..\Core\Src\flash_if.c ICCARM - 295 + 212 - __cstat - 105 + BICOMP + 91 - BICOMP - 145 + __cstat + 317 ICCARM - 116 184 224 228 107 193 334 146 197 72 287 83 329 66 140 273 253 53 124 121 151 94 294 316 314 196 250 89 335 78 157 260 249 333 340 241 95 88 149 305 304 266 81 181 230 122 + 92 272 116 191 254 295 275 313 45 151 319 337 325 343 147 253 266 158 112 70 345 342 152 38 139 94 220 205 63 193 336 257 133 281 179 154 144 279 304 318 207 265 270 340 228 72 297 287 322 321 86 57 264 150 324 298 284 235 50 201 146 165 278 BICOMP - 294 94 146 53 253 228 335 333 184 151 72 78 305 107 116 334 197 314 224 316 196 250 89 157 260 340 95 149 304 81 230 121 193 124 66 140 287 83 329 273 241 266 181 122 249 88 + 57 154 63 322 319 220 112 116 270 201 191 147 266 207 297 298 144 257 205 324 165 70 325 254 151 38 304 265 72 321 150 235 193 133 92 152 278 272 342 337 45 295 275 313 343 253 158 345 139 94 279 336 179 281 86 284 50 146 318 340 228 287 264 - $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_i2c.c + $PROJ_DIR$\..\Core\Src\dma.c ICCARM - 208 + 167 - __cstat - 143 + BICOMP + 312 - BICOMP - 309 + __cstat + 200 ICCARM - 116 184 224 228 107 193 334 146 197 72 287 83 329 66 140 273 253 53 124 121 151 94 294 316 314 196 250 89 335 78 157 260 249 333 340 241 95 88 149 305 304 266 81 181 230 122 + 204 38 139 94 220 205 63 193 336 151 191 254 295 275 313 257 133 281 266 179 154 144 116 45 279 304 318 207 265 270 340 228 72 297 287 322 321 86 57 264 150 324 298 284 235 50 201 146 BICOMP - 149 316 193 228 157 250 340 81 140 329 273 197 107 266 122 224 196 89 260 95 304 230 121 124 66 287 83 146 72 241 181 184 294 151 116 334 53 253 94 314 335 78 333 305 249 88 + 321 133 281 205 265 235 313 191 63 322 38 304 72 150 193 324 139 220 207 270 297 57 298 201 144 154 257 295 275 151 254 94 279 116 336 179 266 45 318 340 228 86 284 50 146 204 287 264 - $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_rcc.c + $PROJ_DIR$\..\Core\Src\wireless.c ICCARM - 317 + 334 - __cstat - 204 + BICOMP + 149 - BICOMP - 113 + __cstat + 168 ICCARM - 116 184 224 228 107 193 334 146 197 72 287 83 329 66 140 273 253 53 124 121 151 94 294 316 314 196 250 89 335 78 157 260 249 333 340 241 95 88 149 305 304 266 81 181 230 122 + 198 191 254 295 275 313 45 88 219 286 60 202 38 139 94 220 205 63 193 336 151 257 133 281 266 179 154 144 116 279 304 318 207 265 270 340 228 72 297 287 322 321 86 57 264 150 324 298 284 235 50 201 146 305 258 171 165 92 272 319 337 325 343 147 253 158 112 70 345 342 199 78 161 218 47 214 278 316 338 BICOMP - 116 146 228 107 333 334 197 72 314 305 184 294 151 53 253 94 335 78 224 316 196 250 89 157 260 340 95 149 304 81 230 121 193 124 66 140 287 83 329 273 241 266 181 122 249 88 + 151 338 191 179 205 272 199 313 139 116 92 38 305 214 45 254 279 266 264 286 171 218 316 295 275 60 94 63 336 318 70 165 88 202 258 78 47 278 161 219 220 304 207 265 270 72 297 321 57 150 298 235 201 144 193 154 340 228 287 342 337 147 112 198 257 133 281 322 86 324 284 50 146 319 325 343 253 158 345 - $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_flash.c + $PROJ_DIR$\..\Core\Src\gpio.c ICCARM - 331 + 113 - __cstat - 99 + BICOMP + 55 - BICOMP - 337 + __cstat + 143 ICCARM - 116 184 224 228 107 193 334 146 197 72 287 83 329 66 140 273 253 53 124 121 151 94 294 316 314 196 250 89 335 78 157 260 249 333 340 241 95 88 149 305 304 266 81 181 230 122 + 302 38 139 94 220 205 63 193 336 151 191 254 295 275 313 257 133 281 266 179 154 144 116 45 279 304 318 207 265 270 340 228 72 297 287 322 321 86 57 264 150 324 298 284 235 50 201 146 BICOMP - 340 140 273 228 250 81 329 197 107 333 316 157 149 193 305 224 196 89 260 95 304 230 121 124 66 287 83 146 72 184 294 151 116 334 53 253 94 314 335 78 241 266 181 122 249 88 + 63 205 139 151 322 336 191 254 318 324 94 279 116 179 266 45 340 228 38 220 304 207 265 270 72 297 321 57 150 298 235 201 144 193 154 257 133 295 275 313 281 86 284 50 146 302 287 264 - $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_flash_ex.c + $PROJ_DIR$\..\Core\Src\recording_wave.c ICCARM - 202 + 183 - __cstat - 60 + BICOMP + 247 - BICOMP - 222 + __cstat + 289 ICCARM - 116 184 224 228 107 193 334 146 197 72 287 83 329 66 140 273 253 53 124 121 151 94 294 316 314 196 250 89 335 78 157 260 249 333 340 241 95 88 149 305 304 266 81 181 230 122 + 198 191 254 295 275 313 45 88 219 152 38 139 94 220 205 63 193 336 151 257 133 281 266 179 154 144 116 279 304 318 207 265 270 340 228 72 297 287 322 321 86 57 264 150 324 298 284 235 50 201 146 258 165 92 272 319 337 325 343 147 253 158 112 70 345 342 78 161 278 218 214 BICOMP - 72 314 334 197 333 228 107 116 146 305 184 294 151 53 253 94 335 78 224 316 196 250 89 157 260 340 95 149 304 81 230 121 193 124 66 140 287 83 329 273 241 266 181 122 249 88 + 45 205 92 214 336 151 139 165 191 94 63 254 272 38 152 278 219 279 116 179 266 322 324 88 258 78 218 295 275 313 220 304 207 265 270 72 297 321 57 150 298 235 201 144 193 154 257 133 281 86 284 50 146 342 337 147 112 70 198 318 340 228 287 264 319 325 343 253 158 345 161 - $PROJ_DIR$\..\Core\Src\adc.c + $PROJ_DIR$\..\Core\Src\main.c ICCARM - 299 + 81 - __cstat - 90 + BICOMP + 333 - BICOMP - 319 + __cstat + 291 ICCARM - 256 111 116 184 224 228 107 193 334 146 197 72 287 83 329 66 140 273 253 53 124 121 151 94 294 316 314 196 250 89 335 78 157 260 249 333 340 241 95 88 149 305 304 266 81 181 230 122 200 169 258 310 325 300 315 152 63 132 147 168 336 326 220 + 38 139 94 220 205 63 193 336 151 191 254 295 275 313 257 133 281 266 179 154 144 116 45 279 304 318 207 265 270 340 228 72 297 287 322 321 86 57 264 150 324 298 284 235 50 201 146 92 272 319 337 325 343 147 253 158 112 70 345 342 305 204 171 286 60 152 258 202 302 - - - - $PROJ_DIR$\startup_stm32l496xx.s - - AARM - 312 + BICOMP + 321 133 281 205 50 302 265 235 313 191 63 60 171 304 72 150 193 86 112 286 305 258 220 207 270 297 57 298 201 144 154 257 295 275 151 254 284 146 337 147 266 45 92 204 152 202 139 94 279 116 336 179 318 340 228 322 324 70 38 287 264 272 342 319 325 343 253 158 345 - + - $PROJ_DIR$\..\Core\Src\cli.c + $PROJ_DIR$\..\Core\Src\rtc.c ICCARM - 255 + 75 - __cstat - 158 + BICOMP + 141 - BICOMP - 275 + __cstat + 300 ICCARM - 245 197 72 287 83 329 94 232 237 91 98 111 116 184 224 228 107 193 334 146 66 140 273 253 53 124 121 151 294 316 314 196 250 89 335 78 157 260 249 333 340 241 95 88 149 305 304 266 81 181 230 122 258 310 325 300 315 152 63 132 147 168 336 169 326 246 254 194 200 233 154 102 155 67 221 103 220 328 211 345 + 171 38 139 94 220 205 63 193 336 151 191 254 295 275 313 257 133 281 266 179 154 144 116 45 279 304 318 207 265 270 340 228 72 297 287 322 321 86 57 264 150 324 298 284 235 50 201 146 286 60 BICOMP - 197 279 221 287 253 246 83 294 146 53 249 111 116 233 211 72 151 228 78 300 132 169 168 194 155 220 345 94 329 98 184 107 334 335 258 326 91 232 254 200 102 67 103 328 154 237 224 316 196 250 89 157 260 340 95 149 304 81 230 121 193 124 66 140 273 314 88 310 315 63 336 245 333 241 305 266 181 122 325 152 147 + 139 151 287 205 63 336 191 254 318 60 38 94 279 116 179 266 45 340 228 286 220 304 207 265 270 72 297 321 57 150 298 235 201 144 193 154 257 133 295 275 313 281 264 171 322 86 324 284 50 146 - $PROJ_DIR$\..\Core\Src\common.c + $PROJ_DIR$\..\Core\Src\FreeRTOS_CLI.c ICCARM - 166 + 54 - __cstat - 313 + BICOMP + 250 - BICOMP - 182 + __cstat + 132 ICCARM - 245 197 72 287 83 329 94 232 237 246 111 116 184 224 228 107 193 334 146 66 140 273 253 53 124 121 151 294 316 314 196 250 89 335 78 157 260 249 333 340 241 95 88 149 305 304 266 81 181 230 122 258 310 325 300 315 152 63 132 147 168 336 169 326 194 91 98 200 233 154 155 + 88 191 254 295 275 313 45 219 151 272 116 319 337 325 343 147 253 266 158 112 70 345 62 165 92 342 + + + BICOMP + 325 253 62 45 116 254 343 345 70 272 191 219 319 158 92 151 165 295 275 313 337 147 112 266 88 342 - $PROJ_DIR$\..\Core\Src\dev_config.c + $PROJ_DIR$\..\Core\Src\system_stm32l4xx.c ICCARM - 227 + 255 - __cstat - 320 + BICOMP + 73 - BICOMP - 45 + __cstat + 267 ICCARM - 232 197 72 287 83 329 94 237 245 111 116 184 224 228 107 193 334 146 66 140 273 253 53 124 121 151 294 316 314 196 250 89 335 78 157 260 249 333 340 241 95 88 149 305 304 266 81 181 230 122 169 258 310 325 300 315 152 63 132 147 168 336 326 200 233 154 67 + 63 193 336 151 191 254 295 275 313 257 133 281 266 179 154 139 94 220 205 144 116 45 279 304 318 207 265 270 340 228 72 297 287 322 321 86 57 264 150 324 298 284 235 50 201 146 BICOMP - 89 72 94 230 228 224 95 124 200 287 83 196 260 304 121 66 197 146 335 258 326 325 152 253 111 67 329 316 250 157 340 149 81 193 140 273 78 249 147 154 245 169 233 237 116 184 294 107 151 334 53 314 88 232 333 241 305 266 181 122 168 310 300 315 63 132 336 + 318 139 151 279 254 191 322 336 94 116 205 324 179 266 63 45 340 228 193 154 257 133 295 275 313 281 220 304 207 265 270 72 297 321 57 150 298 235 201 144 86 284 50 146 287 264 - $PROJ_DIR$\..\Core\Src\flash_if.c + $PROJ_DIR$\..\Core\Src\flash_log.c ICCARM - 209 + 87 - __cstat - 321 + BICOMP + 69 - BICOMP - 175 + __cstat + 210 ICCARM - 169 258 151 197 72 287 83 329 94 146 310 325 300 315 152 63 253 132 147 168 336 326 123 111 116 184 224 228 107 193 334 66 140 273 53 124 121 294 316 314 196 250 89 335 78 157 260 249 333 340 241 95 88 149 305 304 266 81 181 230 122 200 67 + 198 191 254 295 275 313 45 88 219 92 272 116 151 319 337 325 343 147 253 266 158 112 70 345 342 171 38 139 94 220 205 63 193 336 257 133 281 179 154 144 279 304 318 207 265 270 340 228 72 297 287 322 321 86 57 264 150 324 298 284 235 50 201 146 286 60 165 78 161 278 + + + BICOMP + 313 191 161 139 116 205 264 45 171 254 319 151 38 279 315 78 295 275 70 325 147 112 266 94 63 336 281 318 60 88 92 165 278 219 272 342 337 343 253 158 345 286 220 304 207 265 270 72 297 321 57 150 298 235 201 144 193 154 179 340 228 287 198 257 133 322 86 324 284 50 146 - $PROJ_DIR$\..\Core\Src\flash_log.c + $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal.c ICCARM - 161 + 142 - __cstat - 217 + BICOMP + 262 - BICOMP - 185 + __cstat + 320 ICCARM - 245 197 72 287 83 329 94 232 237 169 258 151 146 310 325 300 315 152 63 253 132 147 168 336 326 194 111 116 184 224 228 107 193 334 66 140 273 53 124 121 294 316 314 196 250 89 335 78 157 260 249 333 340 241 95 88 149 305 304 266 81 181 230 122 91 98 200 233 154 67 + 139 94 220 205 63 193 336 151 191 254 295 275 313 257 133 281 266 179 154 144 116 45 279 304 318 207 265 270 340 228 72 297 287 322 321 86 57 264 150 324 298 284 235 50 201 146 + + + BICOMP + 72 304 150 193 322 265 321 235 133 313 281 191 205 63 324 220 207 270 297 57 298 201 144 154 257 295 275 151 254 94 279 116 139 336 179 266 45 318 340 228 86 284 50 146 287 264 - $PROJ_DIR$\..\Core\Src\FreeRTOS_CLI.c + $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_pwr.c ICCARM - 97 + 39 - __cstat - 136 + BICOMP + 181 - BICOMP - 68 + __cstat + 306 ICCARM - 232 197 72 287 83 329 94 237 146 258 151 310 325 300 315 152 63 253 132 147 168 336 102 200 169 326 + 139 94 220 205 63 193 336 151 191 254 295 275 313 257 133 281 266 179 154 144 116 45 279 304 318 207 265 270 340 228 72 297 287 322 321 86 57 264 150 324 298 284 235 50 201 146 + + + BICOMP + 321 133 281 205 265 235 313 191 63 322 304 72 150 193 324 220 207 270 297 57 298 201 144 154 257 295 275 151 254 94 279 116 139 336 179 266 45 318 340 228 86 284 50 146 287 264 - $PROJ_DIR$\..\Core\Src\ADC_collect.c + $PROJ_DIR$\..\Middlewares\Third_Party\FreeRTOS\Source\event_groups.c ICCARM - 244 + 224 - __cstat - 71 + BICOMP + 283 - BICOMP - 189 + __cstat + 99 ICCARM - 245 197 72 287 83 329 94 324 108 232 237 288 142 123 111 116 184 224 228 107 193 334 146 66 140 273 253 53 124 121 151 294 316 314 196 250 89 335 78 157 260 249 333 340 241 95 88 149 305 304 266 81 181 230 122 256 254 200 169 258 310 325 300 315 152 63 132 147 168 336 326 233 154 103 220 345 + 346 191 254 295 275 313 45 40 272 116 151 319 337 325 343 147 253 266 158 112 70 345 160 66 BICOMP - 72 237 233 94 294 146 107 333 123 345 329 197 142 116 151 228 305 111 147 168 232 254 220 287 83 108 184 334 140 273 169 258 326 325 152 253 324 288 256 200 103 154 224 316 196 250 89 157 260 340 95 149 304 81 230 121 193 124 66 241 266 181 122 245 53 314 335 78 249 88 310 300 315 63 132 336 + 112 191 45 160 337 254 147 158 345 272 295 151 70 66 40 275 313 116 319 325 343 253 266 346 - $PROJ_DIR$\..\Core\Src\recording_wave.c + $PROJ_DIR$\..\Middlewares\Third_Party\FreeRTOS\Source\list.c ICCARM - 49 + 331 - __cstat + BICOMP 307 - BICOMP - 44 + __cstat + 37 ICCARM - 245 197 72 287 83 329 94 232 237 123 111 116 184 224 228 107 193 334 146 66 140 273 253 53 124 121 151 294 316 314 196 250 89 335 78 157 260 249 333 340 241 95 88 149 305 304 266 81 181 230 122 254 200 169 258 310 325 300 315 152 63 132 147 168 336 326 233 154 67 220 211 + 346 191 254 295 275 313 45 40 272 116 151 319 337 325 343 147 253 266 158 112 345 BICOMP - 94 249 169 211 334 200 197 184 228 107 116 146 78 258 326 325 152 253 111 123 67 72 237 294 151 53 335 147 232 254 233 220 287 83 329 224 316 196 250 89 157 260 340 95 149 304 81 230 121 193 124 66 140 273 314 88 168 245 333 241 305 266 181 122 310 300 315 63 132 336 154 + 191 325 345 45 295 313 116 151 272 254 40 275 319 343 253 266 346 337 147 112 158 - $PROJ_DIR$\CableMonitor_APP_V3.2\Exe\CableMonitor_APP_V3.2.out + $PROJ_DIR$\..\Middlewares\Third_Party\FreeRTOS\Source\portable\IAR\ARM_CM4F\portasm.s - OBJCOPY - 177 - - - ILINK - 198 + AARM + 48 - ILINK - 70 299 244 255 144 166 92 227 188 239 209 161 341 97 148 80 303 219 55 178 347 214 49 302 240 170 59 312 139 295 280 274 183 101 56 331 202 150 75 208 257 61 100 252 317 296 135 176 137 138 128 47 242 247 235 330 76 174 259 50 126 342 306 73 69 190 + AARM + 319 @@ -1448,526 +1441,557 @@ ICCARM - 137 + 157 - __cstat - 180 + BICOMP + 261 - BICOMP - 262 + __cstat + 49 ICCARM - 116 184 224 228 107 193 334 146 197 72 287 83 329 66 140 273 253 53 124 121 151 94 294 316 314 196 250 89 335 78 157 260 249 333 340 241 95 88 149 305 304 266 81 181 230 122 + 139 94 220 205 63 193 336 151 191 254 295 275 313 257 133 281 266 179 154 144 116 45 279 304 318 207 265 270 340 228 72 297 287 322 321 86 57 264 150 324 298 284 235 50 201 146 BICOMP - 253 228 294 146 53 94 335 151 72 78 266 122 184 107 116 334 197 314 241 181 224 316 196 250 89 157 260 340 95 149 304 81 230 121 193 124 66 140 287 83 329 273 333 305 249 88 + 266 205 279 151 179 45 340 116 254 228 284 146 94 63 139 336 191 318 86 50 220 304 207 265 270 72 297 321 57 150 298 235 201 144 193 154 257 133 295 275 313 281 322 324 287 264 - $PROJ_DIR$\..\Middlewares\Third_Party\FreeRTOS\Source\tasks.c + $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_uart.c ICCARM - 174 + 90 - __cstat - 74 + BICOMP + 173 - BICOMP - 226 + __cstat + 296 ICCARM - 324 197 72 287 83 329 94 108 232 237 258 151 146 310 325 300 315 152 63 253 132 147 168 336 127 57 245 + 139 94 220 205 63 193 336 151 191 254 295 275 313 257 133 281 266 179 154 144 116 45 279 304 318 207 265 270 340 228 72 297 287 322 321 86 57 264 150 324 298 284 235 50 201 146 BICOMP - 197 146 245 151 168 57 94 287 300 232 258 127 72 108 83 329 310 315 63 253 324 237 325 152 147 132 336 + 336 191 254 318 322 205 63 139 151 324 94 279 116 179 266 45 340 228 220 304 207 265 270 72 297 321 57 150 298 235 201 144 193 154 257 133 295 275 313 281 86 284 50 146 287 264 - $PROJ_DIR$\..\Middlewares\Third_Party\FreeRTOS\Source\CMSIS_RTOS_V2\cmsis_os2.c + $PROJ_DIR$\..\Middlewares\Third_Party\FreeRTOS\Source\timers.c ICCARM - 144 + 178 - __cstat - 297 + BICOMP + 85 - BICOMP - 203 + __cstat + 188 ICCARM - 232 197 72 287 83 329 94 237 326 146 151 140 273 253 258 310 325 300 315 152 63 132 147 168 336 160 127 106 104 58 171 107 193 334 66 53 124 116 184 224 228 121 294 316 314 196 250 89 335 78 157 260 249 333 340 241 95 88 149 305 304 266 81 181 230 122 + 346 191 254 295 275 313 45 40 272 116 151 319 337 325 343 147 253 266 158 112 70 345 68 160 BICOMP - 224 197 146 329 168 95 171 104 334 89 230 107 333 325 132 116 196 260 304 121 228 305 140 106 72 287 83 94 315 63 336 53 316 250 157 340 149 81 326 258 160 58 237 151 273 253 310 300 152 147 127 232 193 124 66 184 294 241 266 181 122 314 335 78 249 88 + 147 254 337 158 68 191 45 112 272 295 151 70 160 40 275 313 116 319 325 343 253 266 346 345 - $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_uart.c + $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_rcc.c ICCARM - 242 + 326 - __cstat - 293 + BICOMP + 136 - BICOMP - 216 + __cstat + 187 ICCARM - 116 184 224 228 107 193 334 146 197 72 287 83 329 66 140 273 253 53 124 121 151 94 294 316 314 196 250 89 335 78 157 260 249 333 340 241 95 88 149 305 304 266 81 181 230 122 + 139 94 220 205 63 193 336 151 191 254 295 275 313 257 133 281 266 179 154 144 116 45 279 304 318 207 265 270 340 228 72 297 287 322 321 86 57 264 150 324 298 284 235 50 201 146 BICOMP - 334 197 72 314 333 228 107 116 146 305 184 294 151 53 253 94 335 78 224 316 196 250 89 157 260 340 95 149 304 81 230 121 193 124 66 140 287 83 329 273 241 266 181 122 249 88 + 139 151 205 63 322 336 191 254 318 324 94 279 116 179 266 45 340 228 220 304 207 265 270 72 297 321 57 150 298 235 201 144 193 154 257 133 295 275 313 281 86 284 50 146 287 264 - $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_rtc_ex.c + $PROJ_DIR$\..\Middlewares\Third_Party\FreeRTOS\Source\portable\IAR\ARM_CM4F\port.c ICCARM - 176 + 242 - __cstat - 85 + BICOMP + 164 - BICOMP - 153 + __cstat + 111 ICCARM - 116 184 224 228 107 193 334 146 197 72 287 83 329 66 140 273 253 53 124 121 151 94 294 316 314 196 250 89 335 78 157 260 249 333 340 241 95 88 149 305 304 266 81 181 230 122 + 253 266 254 295 275 313 158 272 116 191 45 151 319 337 325 343 147 112 70 345 BICOMP - 228 107 116 146 333 334 197 72 314 305 184 294 151 53 253 94 335 78 224 316 196 250 89 157 260 340 95 149 304 81 230 121 193 124 66 140 287 83 329 273 241 266 181 122 249 88 + 158 191 254 70 313 151 272 266 295 275 337 45 343 253 116 319 325 147 112 345 - $PROJ_DIR$\..\Middlewares\Third_Party\FreeRTOS\Source\list.c + $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_rtc_ex.c ICCARM - 303 + 80 - __cstat - 109 + BICOMP + 148 - BICOMP - 265 + __cstat + 277 ICCARM - 324 197 72 287 83 329 94 108 258 151 146 310 325 300 315 152 63 253 132 147 336 + 139 94 220 205 63 193 336 151 191 254 295 275 313 257 133 281 266 179 154 144 116 45 279 304 318 207 265 270 340 228 72 297 287 322 321 86 57 264 150 324 298 284 235 50 201 146 BICOMP - 197 300 336 94 287 329 151 146 258 72 108 83 310 315 63 253 324 325 152 147 132 + 205 63 139 151 322 336 191 254 318 324 94 279 116 179 266 45 340 228 220 304 207 265 270 72 297 321 57 150 298 235 201 144 193 154 257 133 295 275 313 281 86 284 50 146 287 264 - $PROJ_DIR$\..\Middlewares\Third_Party\FreeRTOS\Source\portable\IAR\ARM_CM4F\port.c + $PROJ_DIR$\..\Middlewares\Third_Party\FreeRTOS\Source\CMSIS_RTOS_V2\cmsis_os2.c ICCARM - 55 + 108 - __cstat - 130 + BICOMP + 182 - BICOMP - 215 + __cstat + 259 ICCARM - 63 253 72 287 83 329 132 258 151 197 94 146 310 325 300 315 152 147 168 336 + 88 191 254 295 275 313 45 219 342 151 116 133 281 266 272 319 337 325 343 147 253 158 112 70 345 66 160 61 68 229 82 63 193 336 257 179 154 139 94 220 205 144 279 304 318 207 265 270 340 228 72 297 287 322 321 86 57 264 150 324 298 284 235 50 201 146 BICOMP - 132 197 72 168 329 146 258 253 287 83 325 94 315 63 151 310 300 152 147 336 + 220 191 151 313 70 57 82 68 336 270 201 63 322 337 158 139 207 297 298 144 205 324 133 61 254 295 275 45 343 253 345 179 304 265 72 321 150 235 342 272 66 229 219 116 281 266 319 325 147 112 160 88 193 154 257 94 279 86 284 50 146 318 340 228 287 264 - $PROJ_DIR$\..\Middlewares\Third_Party\FreeRTOS\Source\timers.c + $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_pwr_ex.c ICCARM - 50 + 280 - __cstat - 212 + BICOMP + 197 - BICOMP - 236 + __cstat + 176 ICCARM - 324 197 72 287 83 329 94 108 258 151 146 310 325 300 315 152 63 253 132 147 168 336 104 127 + 139 94 220 205 63 193 336 151 191 254 295 275 313 257 133 281 266 179 154 144 116 45 279 304 318 207 265 270 340 228 72 297 287 322 321 86 57 264 150 324 298 284 235 50 201 146 BICOMP - 152 72 325 132 104 197 94 147 258 287 146 168 127 108 83 329 151 310 300 315 63 253 324 336 + 193 304 150 72 322 265 321 235 133 313 281 191 205 63 324 220 207 270 297 57 298 201 144 154 257 295 275 151 254 94 279 116 139 336 179 266 45 318 340 228 86 284 50 146 287 264 - $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_uart_ex.c + $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_spi_ex.c ICCARM - 247 + 134 - __cstat - 54 + BICOMP + 174 - BICOMP - 199 + __cstat + 44 ICCARM - 116 184 224 228 107 193 334 146 197 72 287 83 329 66 140 273 253 53 124 121 151 94 294 316 314 196 250 89 335 78 157 260 249 333 340 241 95 88 149 305 304 266 81 181 230 122 + 139 94 220 205 63 193 336 151 191 254 295 275 313 257 133 281 266 179 154 144 116 45 279 304 318 207 265 270 340 228 72 297 287 322 321 86 57 264 150 324 298 284 235 50 201 146 BICOMP - 197 334 72 314 333 228 107 116 146 305 184 294 151 53 253 94 335 78 224 316 196 250 89 157 260 340 95 149 304 81 230 121 193 124 66 140 287 83 329 273 241 266 181 122 249 88 + 139 151 205 63 322 336 191 254 318 324 94 279 116 179 266 45 340 228 220 304 207 265 270 72 297 321 57 150 298 235 201 144 193 154 257 133 295 275 313 281 86 284 50 146 287 264 - $PROJ_DIR$\..\Middlewares\Third_Party\FreeRTOS\Source\portable\IAR\ARM_CM4F\portasm.s + $PROJ_DIR$\..\Middlewares\Third_Party\FreeRTOS\Source\portable\MemMang\heap_4.c - AARM - 178 + ICCARM + 233 + + + BICOMP + 327 + + + __cstat + 329 - AARM - 310 + ICCARM + 346 191 254 295 275 313 45 40 272 116 151 319 337 325 343 147 253 266 158 112 70 345 + + + BICOMP + 191 343 254 319 266 272 40 275 253 70 45 313 116 325 151 346 295 337 147 112 158 345 - $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_rtc.c + $PROJ_DIR$\..\Middlewares\Third_Party\FreeRTOS\Source\croutine.c ICCARM - 135 + 59 - __cstat - 205 + BICOMP + 215 - BICOMP - 65 + __cstat + 234 ICCARM - 116 184 224 228 107 193 334 146 197 72 287 83 329 66 140 273 253 53 124 121 151 94 294 316 314 196 250 89 335 78 157 260 249 333 340 241 95 88 149 305 304 266 81 181 230 122 + 272 116 191 254 295 275 313 45 151 319 337 325 343 147 253 266 158 112 70 345 260 BICOMP - 72 228 78 184 151 333 294 146 53 253 94 335 305 107 116 334 197 314 224 316 196 250 89 157 260 340 95 149 304 81 230 121 193 124 66 140 287 83 329 273 241 266 181 122 249 88 + 343 191 151 313 266 337 45 253 70 116 319 325 254 275 272 260 295 147 112 158 345 - $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_spi_ex.c + $PROJ_DIR$\..\Middlewares\Third_Party\FreeRTOS\Source\stream_buffer.c ICCARM - 138 + 293 - __cstat - 96 + BICOMP + 172 - BICOMP - 187 + __cstat + 185 ICCARM - 116 184 224 228 107 193 334 146 197 72 287 83 329 66 140 273 253 53 124 121 151 94 294 316 314 196 250 89 335 78 157 260 249 333 340 241 95 88 149 305 304 266 81 181 230 122 + 151 191 254 295 275 313 88 45 219 272 116 319 337 325 343 147 253 266 158 112 70 345 222 BICOMP - 116 146 228 107 333 334 197 72 314 305 184 294 151 53 253 94 335 78 224 316 196 250 89 157 260 340 95 149 304 81 230 121 193 124 66 140 287 83 329 273 241 266 181 122 249 88 + 325 254 70 191 45 116 295 219 319 147 112 158 345 88 272 222 275 313 151 337 343 253 266 - $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_tim.c + $PROJ_DIR$\..\Middlewares\Third_Party\FreeRTOS\Source\queue.c ICCARM - 128 + 169 - __cstat - 125 + BICOMP + 209 - BICOMP - 261 + __cstat + 93 ICCARM - 116 184 224 228 107 193 334 146 197 72 287 83 329 66 140 273 253 53 124 121 151 94 294 316 314 196 250 89 335 78 157 260 249 333 340 241 95 88 149 305 304 266 81 181 230 122 + 346 191 254 295 275 313 45 40 88 219 272 116 151 319 337 325 343 147 253 266 158 112 70 345 68 BICOMP - 228 107 184 116 146 334 197 72 314 266 122 294 151 53 253 94 335 78 241 181 224 316 196 250 89 157 260 340 95 149 304 81 230 121 193 124 66 140 287 83 329 273 333 305 249 88 + 112 254 45 70 40 275 337 147 158 313 191 219 151 88 272 68 295 116 319 325 343 253 266 345 346 - $PROJ_DIR$\..\Middlewares\Third_Party\FreeRTOS\Source\event_groups.c + $PROJ_DIR$\..\Middlewares\Third_Party\FreeRTOS\Source\tasks.c ICCARM - 239 + 51 - __cstat - 173 + BICOMP + 223 - BICOMP - 84 + __cstat + 238 ICCARM - 324 197 72 287 83 329 94 108 258 151 146 310 325 300 315 152 63 253 132 147 168 336 127 160 + 346 191 254 295 275 313 45 40 88 219 272 116 151 319 337 325 343 147 253 266 158 112 70 345 160 190 198 BICOMP - 147 197 94 127 325 72 152 132 336 258 287 146 168 160 108 83 329 151 310 300 315 63 253 324 + 191 151 198 116 70 190 45 295 325 88 272 160 254 40 275 313 319 343 253 266 346 219 337 147 112 158 345 - $PROJ_DIR$\..\Middlewares\Third_Party\FreeRTOS\Source\queue.c + $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_tim.c ICCARM - 214 + 137 - __cstat - 179 + BICOMP + 273 - BICOMP - 243 + __cstat + 145 ICCARM - 324 197 72 287 83 329 94 108 232 237 258 151 146 310 325 300 315 152 63 253 132 147 168 336 104 + 139 94 220 205 63 193 336 151 191 254 295 275 313 257 133 281 266 179 154 144 116 45 279 304 318 207 265 270 340 228 72 297 287 322 321 86 57 264 150 324 298 284 235 50 201 146 BICOMP - 147 72 94 168 108 83 325 152 132 329 197 237 146 232 258 104 287 151 310 300 315 63 253 336 324 + 205 63 94 139 151 336 191 254 318 284 146 279 116 179 266 45 340 228 86 50 220 304 207 265 270 72 297 321 57 150 298 235 201 144 193 154 257 133 295 275 313 281 322 324 287 264 - $PROJ_DIR$\..\Middlewares\Third_Party\FreeRTOS\Source\croutine.c + $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_rtc.c ICCARM - 92 + 156 - __cstat - 51 + BICOMP + 245 - BICOMP - 225 + __cstat + 208 ICCARM - 258 151 197 72 287 83 329 94 146 310 325 300 315 152 63 253 132 147 168 336 298 + 139 94 220 205 63 193 336 151 191 254 295 275 313 257 133 281 266 179 154 144 116 45 279 304 318 207 265 270 340 228 72 297 287 322 321 86 57 264 150 324 298 284 235 50 201 146 BICOMP - 315 197 146 329 253 325 94 63 168 151 310 300 72 83 258 298 287 152 147 132 336 + 254 205 228 94 116 322 279 151 179 266 45 340 324 63 139 336 191 318 220 304 207 265 270 72 297 321 57 150 298 235 201 144 193 154 257 133 295 275 313 281 86 284 50 146 287 264 - $PROJ_DIR$\..\Middlewares\Third_Party\FreeRTOS\Source\portable\MemMang\heap_4.c + $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_tim_ex.c ICCARM - 80 + 248 - __cstat - 332 + BICOMP + 294 - BICOMP - 338 + __cstat + 299 ICCARM - 324 197 72 287 83 329 94 108 258 151 146 310 325 300 315 152 63 253 132 147 168 336 + 139 94 220 205 63 193 336 151 191 254 295 275 313 257 133 281 266 179 154 144 116 45 279 304 318 207 265 270 340 228 72 297 287 322 321 86 57 264 150 324 298 284 235 50 201 146 BICOMP - 197 315 72 310 253 258 108 83 63 168 94 329 151 300 146 324 287 325 152 147 132 336 + 318 254 336 191 322 205 63 139 151 324 94 279 116 179 266 45 340 228 220 304 207 265 270 72 297 321 57 150 298 235 201 144 193 154 257 133 295 275 313 281 86 284 50 146 287 264 - $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_tim_ex.c + $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_rcc_ex.c ICCARM - 47 + 301 - __cstat - 323 + BICOMP + 163 - BICOMP - 281 + __cstat + 64 ICCARM - 116 184 224 228 107 193 334 146 197 72 287 83 329 66 140 273 253 53 124 121 151 94 294 316 314 196 250 89 335 78 157 260 249 333 340 241 95 88 149 305 304 266 81 181 230 122 + 139 94 220 205 63 193 336 151 191 254 295 275 313 257 133 281 266 179 154 144 116 45 279 304 318 207 265 270 340 228 72 297 287 322 321 86 57 264 150 324 298 284 235 50 201 146 BICOMP - 314 72 334 197 333 228 107 116 146 305 184 294 151 53 253 94 335 78 224 316 196 250 89 157 260 340 95 149 304 81 230 121 193 124 66 140 287 83 329 273 241 266 181 122 249 88 + 318 254 336 191 322 205 63 139 151 324 94 279 116 179 266 45 340 228 220 304 207 265 270 72 297 321 57 150 298 235 201 144 193 154 257 133 295 275 313 281 86 284 50 146 287 264 - $PROJ_DIR$\..\Middlewares\Third_Party\FreeRTOS\Source\stream_buffer.c + $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_uart_ex.c ICCARM - 330 + 195 - __cstat - 213 + BICOMP + 175 - BICOMP - 206 + __cstat + 180 ICCARM - 146 197 72 287 83 329 232 94 237 258 151 310 325 300 315 152 63 253 132 147 168 336 218 + 139 94 220 205 63 193 336 151 191 254 295 275 313 257 133 281 266 179 154 144 116 45 279 304 318 207 265 270 340 228 72 297 287 322 321 86 57 264 150 324 298 284 235 50 201 146 BICOMP - 300 72 168 197 94 151 287 237 310 152 147 132 336 232 258 218 83 329 146 325 315 63 253 + 191 336 254 318 322 205 63 139 151 324 94 279 116 179 266 45 340 228 220 304 207 265 270 72 297 321 57 150 298 235 201 144 193 154 257 133 295 275 313 281 86 284 50 146 287 264 - $PROJ_DIR$\..\Core\Src\position.c + $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_i2c_ex.c ICCARM - 347 + 282 - __cstat - 344 + BICOMP + 177 - BICOMP - 343 + __cstat + 98 ICCARM - 245 197 72 287 83 329 94 232 237 246 111 116 184 224 228 107 193 334 146 66 140 273 253 53 124 121 151 294 316 314 196 250 89 335 78 157 260 249 333 340 241 95 88 149 305 304 266 81 181 230 122 200 169 258 310 325 300 315 152 63 132 147 168 336 326 233 154 220 345 67 + 139 94 220 205 63 193 336 151 191 254 295 275 313 257 133 281 266 179 154 144 116 45 279 304 318 207 265 270 340 228 72 297 287 322 321 86 57 264 150 324 298 284 235 50 201 146 BICOMP - 83 89 230 314 228 287 224 95 124 72 233 197 196 260 304 121 66 146 151 169 246 345 94 329 111 316 250 157 340 149 81 193 140 273 88 168 300 132 116 232 200 220 67 237 184 294 107 334 53 253 335 78 249 310 315 63 336 154 258 245 333 241 305 266 181 122 326 325 152 147 + 318 254 336 191 322 205 63 139 151 324 94 279 116 179 266 45 340 228 220 304 207 265 270 72 297 321 57 150 298 235 201 144 193 154 257 133 295 275 313 281 86 284 50 146 287 264 + + + + + $PROJ_DIR$\CableMonitor_APP_V3.2\Exe\CableMonitor_APP_V3.2.out + + + OBJCOPY + 71 + + + ILINK + 213 + + + + + ILINK + 232 309 203 271 108 84 59 217 167 224 212 87 335 54 113 233 331 81 242 48 347 169 183 290 77 75 230 314 142 269 310 303 52 58 231 332 192 159 226 166 282 251 39 280 326 301 156 80 157 134 137 248 90 195 225 293 255 51 285 178 110 334 330 239 244 186 diff --git a/CablePositioning_APP_V1.0/EWARM/settings/CableMonitor_APP_V3.2.CableMonitor_APP_V3.2.cspy.bat b/CablePositioning_APP_V1.0/EWARM/settings/CableMonitor_APP_V3.2.CableMonitor_APP_V3.2.cspy.bat index 4c16b16..3cba9c5 100644 --- a/CablePositioning_APP_V1.0/EWARM/settings/CableMonitor_APP_V3.2.CableMonitor_APP_V3.2.cspy.bat +++ b/CablePositioning_APP_V1.0/EWARM/settings/CableMonitor_APP_V3.2.CableMonitor_APP_V3.2.cspy.bat @@ -25,7 +25,7 @@ if not "%~1" == "" goto debugFile @echo on -"E:\Program Files (x86)\IAR Systems\Embedded Workbench 8.2\common\bin\cspybat" -f "D:\work1\CableMonitor_F427\code\cablemonitorv3.2\CableMonitor_APP_V3.2\EWARM\settings\CableMonitor_APP_V3.2.CableMonitor_APP_V3.2.general.xcl" --backend -f "D:\work1\CableMonitor_F427\code\cablemonitorv3.2\CableMonitor_APP_V3.2\EWARM\settings\CableMonitor_APP_V3.2.CableMonitor_APP_V3.2.driver.xcl" +"D:\App\IAR Systems\Embedded Workbench 8.2\common\bin\cspybat" -f "D:\Work\CablePositioning\Code\CablePositioningV1.0\CablePositioning_APP_V1.0\EWARM\settings\CableMonitor_APP_V3.2.CableMonitor_APP_V3.2.general.xcl" --backend -f "D:\Work\CablePositioning\Code\CablePositioningV1.0\CablePositioning_APP_V1.0\EWARM\settings\CableMonitor_APP_V3.2.CableMonitor_APP_V3.2.driver.xcl" @echo off goto end @@ -34,7 +34,7 @@ goto end @echo on -"E:\Program Files (x86)\IAR Systems\Embedded Workbench 8.2\common\bin\cspybat" -f "D:\work1\CableMonitor_F427\code\cablemonitorv3.2\CableMonitor_APP_V3.2\EWARM\settings\CableMonitor_APP_V3.2.CableMonitor_APP_V3.2.general.xcl" "--debug_file=%~1" --backend -f "D:\work1\CableMonitor_F427\code\cablemonitorv3.2\CableMonitor_APP_V3.2\EWARM\settings\CableMonitor_APP_V3.2.CableMonitor_APP_V3.2.driver.xcl" +"D:\App\IAR Systems\Embedded Workbench 8.2\common\bin\cspybat" -f "D:\Work\CablePositioning\Code\CablePositioningV1.0\CablePositioning_APP_V1.0\EWARM\settings\CableMonitor_APP_V3.2.CableMonitor_APP_V3.2.general.xcl" "--debug_file=%~1" --backend -f "D:\Work\CablePositioning\Code\CablePositioningV1.0\CablePositioning_APP_V1.0\EWARM\settings\CableMonitor_APP_V3.2.CableMonitor_APP_V3.2.driver.xcl" @echo off :end \ No newline at end of file diff --git a/CablePositioning_APP_V1.0/EWARM/settings/CableMonitor_APP_V3.2.CableMonitor_APP_V3.2.cspy.ps1 b/CablePositioning_APP_V1.0/EWARM/settings/CableMonitor_APP_V3.2.CableMonitor_APP_V3.2.cspy.ps1 index 5bf9117..50f7647 100644 --- a/CablePositioning_APP_V1.0/EWARM/settings/CableMonitor_APP_V3.2.CableMonitor_APP_V3.2.cspy.ps1 +++ b/CablePositioning_APP_V1.0/EWARM/settings/CableMonitor_APP_V3.2.CableMonitor_APP_V3.2.cspy.ps1 @@ -23,9 +23,9 @@ if ($debugfile -eq "") { -& "E:\Program Files (x86)\IAR Systems\Embedded Workbench 8.2\common\bin\cspybat" -f "D:\work1\CableMonitor_F427\code\cablemonitorv3.2\CableMonitor_APP_V3.2\EWARM\settings\CableMonitor_APP_V3.2.CableMonitor_APP_V3.2.general.xcl" --backend -f "D:\work1\CableMonitor_F427\code\cablemonitorv3.2\CableMonitor_APP_V3.2\EWARM\settings\CableMonitor_APP_V3.2.CableMonitor_APP_V3.2.driver.xcl" +& "D:\App\IAR Systems\Embedded Workbench 8.2\common\bin\cspybat" -f "D:\Work\CablePositioning\Code\CablePositioningV1.0\CablePositioning_APP_V1.0\EWARM\settings\CableMonitor_APP_V3.2.CableMonitor_APP_V3.2.general.xcl" --backend -f "D:\Work\CablePositioning\Code\CablePositioningV1.0\CablePositioning_APP_V1.0\EWARM\settings\CableMonitor_APP_V3.2.CableMonitor_APP_V3.2.driver.xcl" } else { -& "E:\Program Files (x86)\IAR Systems\Embedded Workbench 8.2\common\bin\cspybat" -f "D:\work1\CableMonitor_F427\code\cablemonitorv3.2\CableMonitor_APP_V3.2\EWARM\settings\CableMonitor_APP_V3.2.CableMonitor_APP_V3.2.general.xcl" --debug_file=$debugfile --backend -f "D:\work1\CableMonitor_F427\code\cablemonitorv3.2\CableMonitor_APP_V3.2\EWARM\settings\CableMonitor_APP_V3.2.CableMonitor_APP_V3.2.driver.xcl" +& "D:\App\IAR Systems\Embedded Workbench 8.2\common\bin\cspybat" -f "D:\Work\CablePositioning\Code\CablePositioningV1.0\CablePositioning_APP_V1.0\EWARM\settings\CableMonitor_APP_V3.2.CableMonitor_APP_V3.2.general.xcl" --debug_file=$debugfile --backend -f "D:\Work\CablePositioning\Code\CablePositioningV1.0\CablePositioning_APP_V1.0\EWARM\settings\CableMonitor_APP_V3.2.CableMonitor_APP_V3.2.driver.xcl" } diff --git a/CablePositioning_APP_V1.0/EWARM/settings/CableMonitor_APP_V3.2.CableMonitor_APP_V3.2.driver.xcl b/CablePositioning_APP_V1.0/EWARM/settings/CableMonitor_APP_V3.2.CableMonitor_APP_V3.2.driver.xcl index beb202b..01b3287 100644 --- a/CablePositioning_APP_V1.0/EWARM/settings/CableMonitor_APP_V3.2.CableMonitor_APP_V3.2.driver.xcl +++ b/CablePositioning_APP_V1.0/EWARM/settings/CableMonitor_APP_V3.2.CableMonitor_APP_V3.2.driver.xcl @@ -6,7 +6,7 @@ "-p" -"E:\Program Files (x86)\IAR Systems\Embedded Workbench 8.2\arm\CONFIG\debugger\ST\STM32L496ZG.ddf" +"D:\App\IAR Systems\Embedded Workbench 8.2\arm\CONFIG\debugger\ST\STM32L496ZG.ddf" "--drv_verify_download" diff --git a/CablePositioning_APP_V1.0/EWARM/settings/CableMonitor_APP_V3.2.CableMonitor_APP_V3.2.general.xcl b/CablePositioning_APP_V1.0/EWARM/settings/CableMonitor_APP_V3.2.CableMonitor_APP_V3.2.general.xcl index 6a72732..45d8dd4 100644 --- a/CablePositioning_APP_V1.0/EWARM/settings/CableMonitor_APP_V3.2.CableMonitor_APP_V3.2.general.xcl +++ b/CablePositioning_APP_V1.0/EWARM/settings/CableMonitor_APP_V3.2.CableMonitor_APP_V3.2.general.xcl @@ -1,14 +1,14 @@ -"E:\Program Files (x86)\IAR Systems\Embedded Workbench 8.2\arm\bin\armproc.dll" +"D:\App\IAR Systems\Embedded Workbench 8.2\arm\bin\armproc.dll" -"E:\Program Files (x86)\IAR Systems\Embedded Workbench 8.2\arm\bin\armjlink2.dll" +"D:\App\IAR Systems\Embedded Workbench 8.2\arm\bin\armjlink2.dll" -"D:\work1\CableMonitor_F427\code\cablemonitorv3.2\CableMonitor_APP_V3.2\EWARM\CableMonitor_APP_V3.2\Exe\CableMonitor_APP_V3.2.out" +"D:\Work\CablePositioning\Code\CablePositioningV1.0\CablePositioning_APP_V1.0\EWARM\CableMonitor_APP_V3.2\Exe\CableMonitor_APP_V3.2.out" ---plugin="E:\Program Files (x86)\IAR Systems\Embedded Workbench 8.2\arm\bin\armbat.dll" +--plugin="D:\App\IAR Systems\Embedded Workbench 8.2\arm\bin\armbat.dll" ---device_macro="E:\Program Files (x86)\IAR Systems\Embedded Workbench 8.2\arm\config\debugger\ST\STM32L4xx.dmac" +--device_macro="D:\App\IAR Systems\Embedded Workbench 8.2\arm\config\debugger\ST\STM32L4xx.dmac" ---flash_loader="E:\Program Files (x86)\IAR Systems\Embedded Workbench 8.2\arm\config\flashloader\ST\FlashSTM32L4AxxG.board" +--flash_loader="D:\App\IAR Systems\Embedded Workbench 8.2\arm\config\flashloader\ST\FlashSTM32L4AxxG.board" diff --git a/CablePositioning_APP_V1.0/EWARM/settings/CableMonitor_APP_V3.2.dnx b/CablePositioning_APP_V1.0/EWARM/settings/CableMonitor_APP_V3.2.dnx index 8e1e8d7..1183d7e 100644 --- a/CablePositioning_APP_V1.0/EWARM/settings/CableMonitor_APP_V3.2.dnx +++ b/CablePositioning_APP_V1.0/EWARM/settings/CableMonitor_APP_V3.2.dnx @@ -21,7 +21,7 @@ 3441181092 - D:\work1\CableMonitor_F427\release\2023-02-24\CM_IAP_1_1_1_8.out + D:\Work\CablePositioning\Code\CablePositioningV1.0\CablePositioning_IAP_V1.0\EWARM\Project.eww _ 0 @@ -134,16 +134,16 @@ _ 0 _ "" - - _ 0 - _ "" - _ 0 - 10000 I0 2 1 1 2 0 0 + + _ 0 + _ "" + _ 0 + 0 diff --git a/CablePositioning_APP_V1.0/EWARM/settings/Project.wsdt b/CablePositioning_APP_V1.0/EWARM/settings/Project.wsdt index a25b4b3..75b2815 100644 --- a/CablePositioning_APP_V1.0/EWARM/settings/Project.wsdt +++ b/CablePositioning_APP_V1.0/EWARM/settings/Project.wsdt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ack @@ -381,7 +381,7 @@ Main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diff --git a/CablePositioning_IAP_V1.0/.mxproject b/CablePositioning_IAP_V1.0/.mxproject index 3d6dd5f..a51471f 100644 --- a/CablePositioning_IAP_V1.0/.mxproject +++ b/CablePositioning_IAP_V1.0/.mxproject @@ -1,5 +1,5 @@ [PreviousLibFiles] -LibFiles=Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_spi.h;Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_spi_ex.h;Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal.h;Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_def.h;Drivers\STM32L4xx_HAL_Driver\Inc\Legacy\stm32_hal_legacy.h;Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_i2c.h;Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_i2c_ex.h;Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_rcc.h;Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_rcc_ex.h;Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_flash.h;Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_flash_ex.h;Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_flash_ramfunc.h;Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_gpio.h;Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_gpio_ex.h;Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_dma.h;Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_dma_ex.h;Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_pwr.h;Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_pwr_ex.h;Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_cortex.h;Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_exti.h;Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_tim.h;Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_tim_ex.h;Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_uart.h;Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_uart_ex.h;Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_spi.c;Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_spi_ex.c;Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal.c;Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_i2c.c;Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_i2c_ex.c;Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_rcc.c;Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_rcc_ex.c;Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_flash.c;Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_flash_ex.c;Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_flash_ramfunc.c;Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_gpio.c;Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_dma.c;Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_dma_ex.c;Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_pwr.c;Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_pwr_ex.c;Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_cortex.c;Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_exti.c;Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_tim.c;Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_tim_ex.c;Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_uart.c;Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_uart_ex.c;Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_spi.h;Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_spi_ex.h;Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal.h;Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_def.h;Drivers\STM32L4xx_HAL_Driver\Inc\Legacy\stm32_hal_legacy.h;Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_i2c.h;Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_i2c_ex.h;Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_rcc.h;Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_rcc_ex.h;Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_flash.h;Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_flash_ex.h;Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_flash_ramfunc.h;Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_gpio.h;Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_gpio_ex.h;Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_dma.h;Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_dma_ex.h;Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_pwr.h;Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_pwr_ex.h;Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_cortex.h;Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_exti.h;Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_tim.h;Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_tim_ex.h;Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_uart.h;Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_uart_ex.h;Drivers\CMSIS\Device\ST\STM32L4xx\Include\stm32l496xx.h;Drivers\CMSIS\Device\ST\STM32L4xx\Include\stm32l4xx.h;Drivers\CMSIS\Device\ST\STM32L4xx\Include\system_stm32l4xx.h;Drivers\CMSIS\Device\ST\STM32L4xx\Source\Templates\system_stm32l4xx.c;Drivers\CMSIS\Include\cmsis_armcc.h;Drivers\CMSIS\Include\cmsis_armclang.h;Drivers\CMSIS\Include\cmsis_armclang_ltm.h;Drivers\CMSIS\Include\cmsis_compiler.h;Drivers\CMSIS\Include\cmsis_gcc.h;Drivers\CMSIS\Include\cmsis_iccarm.h;Drivers\CMSIS\Include\cmsis_version.h;Drivers\CMSIS\Include\core_armv81mml.h;Drivers\CMSIS\Include\core_armv8mbl.h;Drivers\CMSIS\Include\core_armv8mml.h;Drivers\CMSIS\Include\core_cm0.h;Drivers\CMSIS\Include\core_cm0plus.h;Drivers\CMSIS\Include\core_cm1.h;Drivers\CMSIS\Include\core_cm23.h;Drivers\CMSIS\Include\core_cm3.h;Drivers\CMSIS\Include\core_cm33.h;Drivers\CMSIS\Include\core_cm35p.h;Drivers\CMSIS\Include\core_cm4.h;Drivers\CMSIS\Include\core_cm7.h;Drivers\CMSIS\Include\core_sc000.h;Drivers\CMSIS\Include\core_sc300.h;Drivers\CMSIS\Include\mpu_armv7.h;Drivers\CMSIS\Include\mpu_armv8.h;Drivers\CMSIS\Include\tz_context.h; +LibFiles=Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_spi.h;Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_ll_spi.h;Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_spi_ex.h;Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal.h;Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_def.h;Drivers\STM32L4xx_HAL_Driver\Inc\Legacy\stm32_hal_legacy.h;Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_rcc.h;Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_rcc_ex.h;Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_ll_bus.h;Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_ll_rcc.h;Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_ll_crs.h;Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_ll_system.h;Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_ll_utils.h;Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_flash.h;Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_flash_ex.h;Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_flash_ramfunc.h;Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_gpio.h;Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_gpio_ex.h;Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_ll_gpio.h;Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_i2c.h;Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_i2c_ex.h;Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_dma.h;Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_dma_ex.h;Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_ll_dma.h;Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_ll_dmamux.h;Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_pwr.h;Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_pwr_ex.h;Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_ll_pwr.h;Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_cortex.h;Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_ll_cortex.h;Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_exti.h;Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_ll_exti.h;Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_tim.h;Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_tim_ex.h;Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_uart.h;Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_ll_usart.h;Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_ll_lpuart.h;Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_uart_ex.h;Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_spi.c;Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_spi_ex.c;Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal.c;Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_rcc.c;Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_rcc_ex.c;Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_flash.c;Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_flash_ex.c;Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_flash_ramfunc.c;Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_gpio.c;Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_i2c.c;Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_i2c_ex.c;Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_dma.c;Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_dma_ex.c;Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_pwr.c;Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_pwr_ex.c;Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_cortex.c;Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_exti.c;Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_tim.c;Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_tim_ex.c;Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_uart.c;Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_uart_ex.c;Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_spi.h;Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_ll_spi.h;Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_spi_ex.h;Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal.h;Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_def.h;Drivers\STM32L4xx_HAL_Driver\Inc\Legacy\stm32_hal_legacy.h;Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_rcc.h;Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_rcc_ex.h;Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_ll_bus.h;Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_ll_rcc.h;Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_ll_crs.h;Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_ll_system.h;Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_ll_utils.h;Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_flash.h;Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_flash_ex.h;Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_flash_ramfunc.h;Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_gpio.h;Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_gpio_ex.h;Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_ll_gpio.h;Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_i2c.h;Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_i2c_ex.h;Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_dma.h;Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_dma_ex.h;Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_ll_dma.h;Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_ll_dmamux.h;Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_pwr.h;Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_pwr_ex.h;Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_ll_pwr.h;Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_cortex.h;Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_ll_cortex.h;Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_exti.h;Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_ll_exti.h;Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_tim.h;Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_tim_ex.h;Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_uart.h;Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_ll_usart.h;Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_ll_lpuart.h;Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_uart_ex.h;Drivers\CMSIS\Device\ST\STM32L4xx\Include\stm32l496xx.h;Drivers\CMSIS\Device\ST\STM32L4xx\Include\stm32l4xx.h;Drivers\CMSIS\Device\ST\STM32L4xx\Include\system_stm32l4xx.h;Drivers\CMSIS\Device\ST\STM32L4xx\Source\Templates\system_stm32l4xx.c;Drivers\CMSIS\Include\cmsis_armcc.h;Drivers\CMSIS\Include\cmsis_armclang.h;Drivers\CMSIS\Include\cmsis_armclang_ltm.h;Drivers\CMSIS\Include\cmsis_compiler.h;Drivers\CMSIS\Include\cmsis_gcc.h;Drivers\CMSIS\Include\cmsis_iccarm.h;Drivers\CMSIS\Include\cmsis_version.h;Drivers\CMSIS\Include\core_armv81mml.h;Drivers\CMSIS\Include\core_armv8mbl.h;Drivers\CMSIS\Include\core_armv8mml.h;Drivers\CMSIS\Include\core_cm0.h;Drivers\CMSIS\Include\core_cm0plus.h;Drivers\CMSIS\Include\core_cm1.h;Drivers\CMSIS\Include\core_cm23.h;Drivers\CMSIS\Include\core_cm3.h;Drivers\CMSIS\Include\core_cm33.h;Drivers\CMSIS\Include\core_cm35p.h;Drivers\CMSIS\Include\core_cm4.h;Drivers\CMSIS\Include\core_cm7.h;Drivers\CMSIS\Include\core_sc000.h;Drivers\CMSIS\Include\core_sc300.h;Drivers\CMSIS\Include\mpu_armv7.h;Drivers\CMSIS\Include\mpu_armv8.h;Drivers\CMSIS\Include\tz_context.h; [PreviousUsedKeilFiles] SourceFiles=..\Src\main.c;..\Src\stm32l4xx_it.c;..\Src\stm32l4xx_hal_msp.c;..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_spi.c;..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_spi_ex.c;..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal.c;..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_i2c.c;..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_i2c_ex.c;..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_rcc.c;..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_rcc_ex.c;..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_flash.c;..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_flash_ex.c;..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_flash_ramfunc.c;..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_gpio.c;..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_dma.c;..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_dma_ex.c;..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_pwr.c;..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_pwr_ex.c;..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_cortex.c;..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_exti.c;..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_tim.c;..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_tim_ex.c;..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_uart.c;..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_uart_ex.c;..\Drivers\CMSIS\Device\ST\STM32L4xx\Source\Templates\system_stm32l4xx.c;..\\Src\system_stm32l4xx.c;..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_spi.c;..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_spi_ex.c;..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal.c;..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_i2c.c;..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_i2c_ex.c;..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_rcc.c;..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_rcc_ex.c;..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_flash.c;..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_flash_ex.c;..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_flash_ramfunc.c;..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_gpio.c;..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_dma.c;..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_dma_ex.c;..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_pwr.c;..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_pwr_ex.c;..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_cortex.c;..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_exti.c;..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_tim.c;..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_tim_ex.c;..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_uart.c;..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_uart_ex.c;..\Drivers\CMSIS\Device\ST\STM32L4xx\Source\Templates\system_stm32l4xx.c;..\\Src\system_stm32l4xx.c;;; @@ -7,7 +7,7 @@ HeaderPath=..\Drivers\STM32L4xx_HAL_Driver\Inc;..\Drivers\STM32L4xx_HAL_Driver\I CDefines=USE_HAL_DRIVER;STM32L496xx;USE_HAL_DRIVER;USE_HAL_DRIVER; [PreviousUsedIarFiles] -SourceFiles=..\Src\main.c;..\Src\stm32l4xx_it.c;..\Src\stm32l4xx_hal_msp.c;..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_spi.c;..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_spi_ex.c;..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal.c;..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_i2c.c;..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_i2c_ex.c;..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_rcc.c;..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_rcc_ex.c;..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_flash.c;..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_flash_ex.c;..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_flash_ramfunc.c;..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_gpio.c;..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_dma.c;..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_dma_ex.c;..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_pwr.c;..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_pwr_ex.c;..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_cortex.c;..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_exti.c;..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_tim.c;..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_tim_ex.c;..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_uart.c;..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_uart_ex.c;..\Drivers\CMSIS\Device\ST\STM32L4xx\Source\Templates\system_stm32l4xx.c;..\\Src\system_stm32l4xx.c;..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_spi.c;..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_spi_ex.c;..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal.c;..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_i2c.c;..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_i2c_ex.c;..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_rcc.c;..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_rcc_ex.c;..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_flash.c;..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_flash_ex.c;..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_flash_ramfunc.c;..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_gpio.c;..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_dma.c;..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_dma_ex.c;..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_pwr.c;..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_pwr_ex.c;..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_cortex.c;..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_exti.c;..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_tim.c;..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_tim_ex.c;..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_uart.c;..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_uart_ex.c;..\Drivers\CMSIS\Device\ST\STM32L4xx\Source\Templates\system_stm32l4xx.c;..\\Src\system_stm32l4xx.c;;; +SourceFiles=..\Src\main.c;..\Src\stm32l4xx_it.c;..\Src\stm32l4xx_hal_msp.c;..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_spi.c;..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_spi_ex.c;..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal.c;..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_rcc.c;..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_rcc_ex.c;..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_flash.c;..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_flash_ex.c;..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_flash_ramfunc.c;..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_gpio.c;..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_i2c.c;..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_i2c_ex.c;..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_dma.c;..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_dma_ex.c;..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_pwr.c;..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_pwr_ex.c;..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_cortex.c;..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_exti.c;..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_tim.c;..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_tim_ex.c;..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_uart.c;..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_uart_ex.c;..\Drivers\CMSIS\Device\ST\STM32L4xx\Source\Templates\system_stm32l4xx.c;..\\Src\system_stm32l4xx.c;..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_spi.c;..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_spi_ex.c;..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal.c;..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_rcc.c;..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_rcc_ex.c;..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_flash.c;..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_flash_ex.c;..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_flash_ramfunc.c;..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_gpio.c;..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_i2c.c;..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_i2c_ex.c;..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_dma.c;..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_dma_ex.c;..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_pwr.c;..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_pwr_ex.c;..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_cortex.c;..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_exti.c;..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_tim.c;..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_tim_ex.c;..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_uart.c;..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_uart_ex.c;..\Drivers\CMSIS\Device\ST\STM32L4xx\Source\Templates\system_stm32l4xx.c;..\\Src\system_stm32l4xx.c;;; HeaderPath=..\Drivers\STM32L4xx_HAL_Driver\Inc;..\Drivers\STM32L4xx_HAL_Driver\Inc\Legacy;..\Drivers\CMSIS\Device\ST\STM32L4xx\Include;..\Drivers\CMSIS\Include;..\Inc; CDefines=USE_HAL_DRIVER;STM32L496xx;USE_HAL_DRIVER;USE_HAL_DRIVER; diff --git a/CablePositioning_IAP_V1.0/CableMonitor_V3.2.ioc b/CablePositioning_IAP_V1.0/CableMonitor_V3.2.ioc index 57d36ad..4d5001c 100644 --- a/CablePositioning_IAP_V1.0/CableMonitor_V3.2.ioc +++ b/CablePositioning_IAP_V1.0/CableMonitor_V3.2.ioc @@ -1,53 +1,52 @@ #MicroXplorer Configuration settings - do not modify +CAD.formats= +CAD.pinconfig= +CAD.provider= File.Version=6 GPIO.groupedBy=Group By Peripherals KeepUserPlacement=false +Mcu.CPN=STM32L496ZGT3 Mcu.Family=STM32L4 Mcu.IP0=NVIC Mcu.IP1=RCC Mcu.IP2=SPI3 Mcu.IP3=SYS -Mcu.IP4=TIM1 -Mcu.IP5=UART4 -Mcu.IPNb=6 +Mcu.IP4=UART4 +Mcu.IPNb=5 Mcu.Name=STM32L496Z(E-G)Tx Mcu.Package=LQFP144 Mcu.Pin0=PC14-OSC32_IN (PC14) Mcu.Pin1=PF0 -Mcu.Pin10=PC10 -Mcu.Pin11=PC11 -Mcu.Pin12=PC12 -Mcu.Pin13=PG13 -Mcu.Pin14=PG14 -Mcu.Pin15=PE1 -Mcu.Pin16=VP_SYS_VS_Systick -Mcu.Pin17=VP_TIM1_VS_ClockSourceINT +Mcu.Pin10=PC11 +Mcu.Pin11=PC12 +Mcu.Pin12=PG13 +Mcu.Pin13=PG14 +Mcu.Pin14=VP_SYS_VS_Systick Mcu.Pin2=PH0-OSC_IN (PH0) Mcu.Pin3=PH1-OSC_OUT (PH1) Mcu.Pin4=PA0 Mcu.Pin5=PA1 -Mcu.Pin6=PF12 -Mcu.Pin7=PG4 -Mcu.Pin8=PA13 (JTMS/SWDIO) -Mcu.Pin9=PA14 (JTCK/SWCLK) -Mcu.PinsNb=18 +Mcu.Pin6=PG4 +Mcu.Pin7=PA13 (JTMS/SWDIO) +Mcu.Pin8=PA14 (JTCK/SWCLK) +Mcu.Pin9=PC10 +Mcu.PinsNb=15 Mcu.ThirdPartyNb=0 Mcu.UserConstants= Mcu.UserName=STM32L496ZGTx -MxCube.Version=6.4.0 -MxDb.Version=DB.6.0.40 -NVIC.BusFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false -NVIC.DebugMonitor_IRQn=true\:0\:0\:false\:false\:true\:false\:false +MxCube.Version=6.10.0 +MxDb.Version=DB.6.0.100 +NVIC.BusFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false +NVIC.DebugMonitor_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false NVIC.ForceEnableDMAVector=true -NVIC.HardFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false -NVIC.MemoryManagement_IRQn=true\:0\:0\:false\:false\:true\:false\:false -NVIC.NonMaskableInt_IRQn=true\:0\:0\:false\:false\:true\:false\:false -NVIC.PendSV_IRQn=true\:0\:0\:false\:false\:true\:false\:false +NVIC.HardFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false +NVIC.MemoryManagement_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false +NVIC.NonMaskableInt_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false +NVIC.PendSV_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false NVIC.PriorityGroup=NVIC_PRIORITYGROUP_4 -NVIC.SVCall_IRQn=true\:0\:0\:false\:false\:true\:false\:false -NVIC.SysTick_IRQn=true\:15\:0\:false\:false\:true\:false\:true -NVIC.TIM1_UP_TIM16_IRQn=true\:0\:0\:false\:false\:true\:true\:true -NVIC.UsageFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false +NVIC.SVCall_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false +NVIC.SysTick_IRQn=true\:15\:0\:false\:false\:true\:false\:true\:false +NVIC.UsageFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false PA0.Locked=true PA0.Mode=Asynchronous PA0.Signal=UART4_TX @@ -69,19 +68,10 @@ PC12.Mode=Full_Duplex_Master PC12.Signal=SPI3_MOSI PC14-OSC32_IN\ (PC14).Mode=LSE-External-Clock-Source PC14-OSC32_IN\ (PC14).Signal=RCC_OSC32_IN -PE1.GPIOParameters=PinState,GPIO_Label -PE1.GPIO_Label=POWER_EN_3V3 -PE1.Locked=true -PE1.PinState=GPIO_PIN_SET -PE1.Signal=GPIO_Output PF0.GPIOParameters=GPIO_Label PF0.GPIO_Label=WDG PF0.Locked=true PF0.Signal=GPIO_Output -PF12.GPIOParameters=GPIO_Label -PF12.GPIO_Label=B_485_EN -PF12.Locked=true -PF12.Signal=GPIO_Output PG13.GPIOParameters=PinState,GPIO_PuPd,GPIO_Label PG13.GPIO_Label=SPI_FLASH_WP PG13.GPIO_PuPd=GPIO_NOPULL @@ -114,7 +104,7 @@ ProjectManager.CustomerFirmwarePackage= ProjectManager.DefaultFWLocation=true ProjectManager.DeletePrevious=true ProjectManager.DeviceId=STM32L496ZGTx -ProjectManager.FirmwarePackage=STM32Cube FW_L4 V1.17.2 +ProjectManager.FirmwarePackage=STM32Cube FW_L4 V1.18.1 ProjectManager.FreePins=true ProjectManager.HalAssertFull=false ProjectManager.HeapSize=0x200 @@ -127,12 +117,15 @@ ProjectManager.PreviousToolchain= ProjectManager.ProjectBuild=false ProjectManager.ProjectFileName=CableMonitor_V3.2.ioc ProjectManager.ProjectName=CableMonitor_V3.2 +ProjectManager.ProjectStructure= ProjectManager.RegisterCallBack= ProjectManager.StackSize=0x400 ProjectManager.TargetToolchain=EWARM V8.32 ProjectManager.ToolChainLocation= +ProjectManager.UAScriptAfterPath= +ProjectManager.UAScriptBeforePath= ProjectManager.UnderRoot=false -ProjectManager.functionlistsort=1-MX_GPIO_Init-GPIO-false-HAL-true,2-SystemClock_Config-RCC-false-HAL-false,3-MX_SPI3_Init-SPI3-false-HAL-true,4-MX_UART4_Init-UART4-false-HAL-true,5-MX_TIM1_Init-TIM1-false-HAL-true +ProjectManager.functionlistsort=1-MX_GPIO_Init-GPIO-false-HAL-true,2-SystemClock_Config-RCC-false-HAL-false,3-MX_SPI3_Init-SPI3-false-HAL-true,4-MX_UART4_Init-UART4-false-HAL-true RCC.ADCFreq_Value=20000000 RCC.AHBFreq_Value=80000000 RCC.APB1Freq_Value=80000000 @@ -198,13 +191,6 @@ SPI3.Direction=SPI_DIRECTION_2LINES SPI3.IPParameters=VirtualType,Mode,Direction,CalculateBaudRate,DataSize,BaudRatePrescaler,CLKPolarity,CLKPhase SPI3.Mode=SPI_MODE_MASTER SPI3.VirtualType=VM_MASTER -TIM1.AutoReloadPreload=TIM_AUTORELOAD_PRELOAD_ENABLE -TIM1.ClockDivision=TIM_CLOCKDIVISION_DIV4 -TIM1.IPParameters=Prescaler,Period,ClockDivision,AutoReloadPreload -TIM1.Period=39999 -TIM1.Prescaler=39999 VP_SYS_VS_Systick.Mode=SysTick VP_SYS_VS_Systick.Signal=SYS_VS_Systick -VP_TIM1_VS_ClockSourceINT.Mode=Internal -VP_TIM1_VS_ClockSourceINT.Signal=TIM1_VS_ClockSourceINT board=custom diff --git a/CablePositioning_IAP_V1.0/Drivers/CMSIS/Device/ST/STM32L4xx/Include/stm32l496xx.h b/CablePositioning_IAP_V1.0/Drivers/CMSIS/Device/ST/STM32L4xx/Include/stm32l496xx.h index 7186a7a..123339e 100644 --- a/CablePositioning_IAP_V1.0/Drivers/CMSIS/Device/ST/STM32L4xx/Include/stm32l496xx.h +++ b/CablePositioning_IAP_V1.0/Drivers/CMSIS/Device/ST/STM32L4xx/Include/stm32l496xx.h @@ -1,19746 +1,19748 @@ -/** - ****************************************************************************** - * @file stm32l496xx.h - * @author MCD Application Team - * @brief CMSIS STM32L496xx Device Peripheral Access Layer Header File. - * - * This file contains: - * - Data structures and the address mapping for all peripherals - * - Peripheral's registers declarations and bits definition - * - Macros to access peripheral's registers hardware - * - ****************************************************************************** - * @attention - * - * Copyright (c) 2017 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - */ - -/** @addtogroup CMSIS_Device - * @{ - */ - -/** @addtogroup stm32l496xx - * @{ - */ - -#ifndef __STM32L496xx_H -#define __STM32L496xx_H - -#ifdef __cplusplus - extern "C" { -#endif /* __cplusplus */ - -/** @addtogroup Configuration_section_for_CMSIS - * @{ - */ - -/** - * @brief Configuration of the Cortex-M4 Processor and Core Peripherals - */ -#define __CM4_REV 0x0001U /*!< Cortex-M4 revision r0p1 */ -#define __MPU_PRESENT 1U /*!< STM32L4XX provides an MPU */ -#define __NVIC_PRIO_BITS 4U /*!< STM32L4XX uses 4 Bits for the Priority Levels */ -#define __Vendor_SysTickConfig 0U /*!< Set to 1 if different SysTick Config is used */ -#define __FPU_PRESENT 1U /*!< FPU present */ - -/** - * @} - */ - -/** @addtogroup Peripheral_interrupt_number_definition - * @{ - */ - -/** - * @brief STM32L4XX Interrupt Number Definition, according to the selected device - * in @ref Library_configuration_section - */ -typedef enum -{ -/****** Cortex-M4 Processor Exceptions Numbers ****************************************************************/ - NonMaskableInt_IRQn = -14, /*!< 2 Cortex-M4 Non Maskable Interrupt */ - HardFault_IRQn = -13, /*!< 3 Cortex-M4 Hard Fault Interrupt */ - MemoryManagement_IRQn = -12, /*!< 4 Cortex-M4 Memory Management Interrupt */ - BusFault_IRQn = -11, /*!< 5 Cortex-M4 Bus Fault Interrupt */ - UsageFault_IRQn = -10, /*!< 6 Cortex-M4 Usage Fault Interrupt */ - SVCall_IRQn = -5, /*!< 11 Cortex-M4 SV Call Interrupt */ - DebugMonitor_IRQn = -4, /*!< 12 Cortex-M4 Debug Monitor Interrupt */ - PendSV_IRQn = -2, /*!< 14 Cortex-M4 Pend SV Interrupt */ - SysTick_IRQn = -1, /*!< 15 Cortex-M4 System Tick Interrupt */ -/****** STM32 specific Interrupt Numbers **********************************************************************/ - WWDG_IRQn = 0, /*!< Window WatchDog Interrupt */ - PVD_PVM_IRQn = 1, /*!< PVD/PVM1/PVM2/PVM3/PVM4 through EXTI Line detection Interrupts */ - TAMP_STAMP_IRQn = 2, /*!< Tamper and TimeStamp interrupts through the EXTI line */ - RTC_WKUP_IRQn = 3, /*!< RTC Wakeup interrupt through the EXTI line */ - FLASH_IRQn = 4, /*!< FLASH global Interrupt */ - RCC_IRQn = 5, /*!< RCC global Interrupt */ - EXTI0_IRQn = 6, /*!< EXTI Line0 Interrupt */ - EXTI1_IRQn = 7, /*!< EXTI Line1 Interrupt */ - EXTI2_IRQn = 8, /*!< EXTI Line2 Interrupt */ - EXTI3_IRQn = 9, /*!< EXTI Line3 Interrupt */ - EXTI4_IRQn = 10, /*!< EXTI Line4 Interrupt */ - DMA1_Channel1_IRQn = 11, /*!< DMA1 Channel 1 global Interrupt */ - DMA1_Channel2_IRQn = 12, /*!< DMA1 Channel 2 global Interrupt */ - DMA1_Channel3_IRQn = 13, /*!< DMA1 Channel 3 global Interrupt */ - DMA1_Channel4_IRQn = 14, /*!< DMA1 Channel 4 global Interrupt */ - DMA1_Channel5_IRQn = 15, /*!< DMA1 Channel 5 global Interrupt */ - DMA1_Channel6_IRQn = 16, /*!< DMA1 Channel 6 global Interrupt */ - DMA1_Channel7_IRQn = 17, /*!< DMA1 Channel 7 global Interrupt */ - ADC1_2_IRQn = 18, /*!< ADC1, ADC2 SAR global Interrupts */ - CAN1_TX_IRQn = 19, /*!< CAN1 TX Interrupt */ - CAN1_RX0_IRQn = 20, /*!< CAN1 RX0 Interrupt */ - CAN1_RX1_IRQn = 21, /*!< CAN1 RX1 Interrupt */ - CAN1_SCE_IRQn = 22, /*!< CAN1 SCE Interrupt */ - EXTI9_5_IRQn = 23, /*!< External Line[9:5] Interrupts */ - TIM1_BRK_TIM15_IRQn = 24, /*!< TIM1 Break interrupt and TIM15 global interrupt */ - TIM1_UP_TIM16_IRQn = 25, /*!< TIM1 Update Interrupt and TIM16 global interrupt */ - TIM1_TRG_COM_TIM17_IRQn = 26, /*!< TIM1 Trigger and Commutation Interrupt and TIM17 global interrupt */ - TIM1_CC_IRQn = 27, /*!< TIM1 Capture Compare Interrupt */ - TIM2_IRQn = 28, /*!< TIM2 global Interrupt */ - TIM3_IRQn = 29, /*!< TIM3 global Interrupt */ - TIM4_IRQn = 30, /*!< TIM4 global Interrupt */ - I2C1_EV_IRQn = 31, /*!< I2C1 Event Interrupt */ - I2C1_ER_IRQn = 32, /*!< I2C1 Error Interrupt */ - I2C2_EV_IRQn = 33, /*!< I2C2 Event Interrupt */ - I2C2_ER_IRQn = 34, /*!< I2C2 Error Interrupt */ - SPI1_IRQn = 35, /*!< SPI1 global Interrupt */ - SPI2_IRQn = 36, /*!< SPI2 global Interrupt */ - USART1_IRQn = 37, /*!< USART1 global Interrupt */ - USART2_IRQn = 38, /*!< USART2 global Interrupt */ - USART3_IRQn = 39, /*!< USART3 global Interrupt */ - EXTI15_10_IRQn = 40, /*!< External Line[15:10] Interrupts */ - RTC_Alarm_IRQn = 41, /*!< RTC Alarm (A and B) through EXTI Line Interrupt */ - DFSDM1_FLT3_IRQn = 42, /*!< DFSDM1 Filter 3 global Interrupt */ - TIM8_BRK_IRQn = 43, /*!< TIM8 Break Interrupt */ - TIM8_UP_IRQn = 44, /*!< TIM8 Update Interrupt */ - TIM8_TRG_COM_IRQn = 45, /*!< TIM8 Trigger and Commutation Interrupt */ - TIM8_CC_IRQn = 46, /*!< TIM8 Capture Compare Interrupt */ - ADC3_IRQn = 47, /*!< ADC3 global Interrupt */ - FMC_IRQn = 48, /*!< FMC global Interrupt */ - SDMMC1_IRQn = 49, /*!< SDMMC1 global Interrupt */ - TIM5_IRQn = 50, /*!< TIM5 global Interrupt */ - SPI3_IRQn = 51, /*!< SPI3 global Interrupt */ - UART4_IRQn = 52, /*!< UART4 global Interrupt */ - UART5_IRQn = 53, /*!< UART5 global Interrupt */ - TIM6_DAC_IRQn = 54, /*!< TIM6 global and DAC1&2 underrun error interrupts */ - TIM7_IRQn = 55, /*!< TIM7 global interrupt */ - DMA2_Channel1_IRQn = 56, /*!< DMA2 Channel 1 global Interrupt */ - DMA2_Channel2_IRQn = 57, /*!< DMA2 Channel 2 global Interrupt */ - DMA2_Channel3_IRQn = 58, /*!< DMA2 Channel 3 global Interrupt */ - DMA2_Channel4_IRQn = 59, /*!< DMA2 Channel 4 global Interrupt */ - DMA2_Channel5_IRQn = 60, /*!< DMA2 Channel 5 global Interrupt */ - DFSDM1_FLT0_IRQn = 61, /*!< DFSDM1 Filter 0 global Interrupt */ - DFSDM1_FLT1_IRQn = 62, /*!< DFSDM1 Filter 1 global Interrupt */ - DFSDM1_FLT2_IRQn = 63, /*!< DFSDM1 Filter 2 global Interrupt */ - COMP_IRQn = 64, /*!< COMP1 and COMP2 Interrupts */ - LPTIM1_IRQn = 65, /*!< LP TIM1 interrupt */ - LPTIM2_IRQn = 66, /*!< LP TIM2 interrupt */ - OTG_FS_IRQn = 67, /*!< USB OTG FS global Interrupt */ - DMA2_Channel6_IRQn = 68, /*!< DMA2 Channel 6 global interrupt */ - DMA2_Channel7_IRQn = 69, /*!< DMA2 Channel 7 global interrupt */ - LPUART1_IRQn = 70, /*!< LP UART1 interrupt */ - QUADSPI_IRQn = 71, /*!< Quad SPI global interrupt */ - I2C3_EV_IRQn = 72, /*!< I2C3 event interrupt */ - I2C3_ER_IRQn = 73, /*!< I2C3 error interrupt */ - SAI1_IRQn = 74, /*!< Serial Audio Interface 1 global interrupt */ - SAI2_IRQn = 75, /*!< Serial Audio Interface 2 global interrupt */ - SWPMI1_IRQn = 76, /*!< Serial Wire Interface 1 global interrupt */ - TSC_IRQn = 77, /*!< Touch Sense Controller global interrupt */ - LCD_IRQn = 78, /*!< LCD global interrupt */ - RNG_IRQn = 80, /*!< RNG global interrupt */ - FPU_IRQn = 81, /*!< FPU global interrupt */ - CRS_IRQn = 82, /*!< CRS global interrupt */ - I2C4_EV_IRQn = 83, /*!< I2C4 Event interrupt */ - I2C4_ER_IRQn = 84, /*!< I2C4 Error interrupt */ - DCMI_IRQn = 85, /*!< DCMI global interrupt */ - CAN2_TX_IRQn = 86, /*!< CAN2 TX interrupt */ - CAN2_RX0_IRQn = 87, /*!< CAN2 RX0 interrupt */ - CAN2_RX1_IRQn = 88, /*!< CAN2 RX1 interrupt */ - CAN2_SCE_IRQn = 89, /*!< CAN2 SCE interrupt */ - DMA2D_IRQn = 90 /*!< DMA2D global interrupt */ -} IRQn_Type; - -/** - * @} - */ - -#include "core_cm4.h" /* Cortex-M4 processor and core peripherals */ -#include "system_stm32l4xx.h" -#include - -/** @addtogroup Peripheral_registers_structures - * @{ - */ - -/** - * @brief Analog to Digital Converter - */ - -typedef struct -{ - __IO uint32_t ISR; /*!< ADC interrupt and status register, Address offset: 0x00 */ - __IO uint32_t IER; /*!< ADC interrupt enable register, Address offset: 0x04 */ - __IO uint32_t CR; /*!< ADC control register, Address offset: 0x08 */ - __IO uint32_t CFGR; /*!< ADC configuration register 1, Address offset: 0x0C */ - __IO uint32_t CFGR2; /*!< ADC configuration register 2, Address offset: 0x10 */ - __IO uint32_t SMPR1; /*!< ADC sampling time register 1, Address offset: 0x14 */ - __IO uint32_t SMPR2; /*!< ADC sampling time register 2, Address offset: 0x18 */ - uint32_t RESERVED1; /*!< Reserved, 0x1C */ - __IO uint32_t TR1; /*!< ADC analog watchdog 1 threshold register, Address offset: 0x20 */ - __IO uint32_t TR2; /*!< ADC analog watchdog 2 threshold register, Address offset: 0x24 */ - __IO uint32_t TR3; /*!< ADC analog watchdog 3 threshold register, Address offset: 0x28 */ - uint32_t RESERVED2; /*!< Reserved, 0x2C */ - __IO uint32_t SQR1; /*!< ADC group regular sequencer register 1, Address offset: 0x30 */ - __IO uint32_t SQR2; /*!< ADC group regular sequencer register 2, Address offset: 0x34 */ - __IO uint32_t SQR3; /*!< ADC group regular sequencer register 3, Address offset: 0x38 */ - __IO uint32_t SQR4; /*!< ADC group regular sequencer register 4, Address offset: 0x3C */ - __IO uint32_t DR; /*!< ADC group regular data register, Address offset: 0x40 */ - uint32_t RESERVED3; /*!< Reserved, 0x44 */ - uint32_t RESERVED4; /*!< Reserved, 0x48 */ - __IO uint32_t JSQR; /*!< ADC group injected sequencer register, Address offset: 0x4C */ - uint32_t RESERVED5[4]; /*!< Reserved, 0x50 - 0x5C */ - __IO uint32_t OFR1; /*!< ADC offset register 1, Address offset: 0x60 */ - __IO uint32_t OFR2; /*!< ADC offset register 2, Address offset: 0x64 */ - __IO uint32_t OFR3; /*!< ADC offset register 3, Address offset: 0x68 */ - __IO uint32_t OFR4; /*!< ADC offset register 4, Address offset: 0x6C */ - uint32_t RESERVED6[4]; /*!< Reserved, 0x70 - 0x7C */ - __IO uint32_t JDR1; /*!< ADC group injected rank 1 data register, Address offset: 0x80 */ - __IO uint32_t JDR2; /*!< ADC group injected rank 2 data register, Address offset: 0x84 */ - __IO uint32_t JDR3; /*!< ADC group injected rank 3 data register, Address offset: 0x88 */ - __IO uint32_t JDR4; /*!< ADC group injected rank 4 data register, Address offset: 0x8C */ - uint32_t RESERVED7[4]; /*!< Reserved, 0x090 - 0x09C */ - __IO uint32_t AWD2CR; /*!< ADC analog watchdog 1 configuration register, Address offset: 0xA0 */ - __IO uint32_t AWD3CR; /*!< ADC analog watchdog 3 Configuration Register, Address offset: 0xA4 */ - uint32_t RESERVED8; /*!< Reserved, 0x0A8 */ - uint32_t RESERVED9; /*!< Reserved, 0x0AC */ - __IO uint32_t DIFSEL; /*!< ADC differential mode selection register, Address offset: 0xB0 */ - __IO uint32_t CALFACT; /*!< ADC calibration factors, Address offset: 0xB4 */ - -} ADC_TypeDef; - -typedef struct -{ - __IO uint32_t CSR; /*!< ADC common status register, Address offset: ADC1 base address + 0x300 */ - uint32_t RESERVED; /*!< Reserved, Address offset: ADC1 base address + 0x304 */ - __IO uint32_t CCR; /*!< ADC common configuration register, Address offset: ADC1 base address + 0x308 */ - __IO uint32_t CDR; /*!< ADC common group regular data register Address offset: ADC1 base address + 0x30C */ -} ADC_Common_TypeDef; - -/** - * @brief DCMI - */ - -typedef struct -{ - __IO uint32_t CR; /*!< DCMI control register, Address offset: 0x00 */ - __IO uint32_t SR; /*!< DCMI status register, Address offset: 0x04 */ - __IO uint32_t RISR; /*!< DCMI raw interrupt status register, Address offset: 0x08 */ - __IO uint32_t IER; /*!< DCMI interrupt enable register, Address offset: 0x0C */ - __IO uint32_t MISR; /*!< DCMI masked interrupt status register, Address offset: 0x10 */ - __IO uint32_t ICR; /*!< DCMI interrupt clear register, Address offset: 0x14 */ - __IO uint32_t ESCR; /*!< DCMI embedded synchronization code register, Address offset: 0x18 */ - __IO uint32_t ESUR; /*!< DCMI embedded synchronization unmask register, Address offset: 0x1C */ - __IO uint32_t CWSTRTR; /*!< DCMI crop window start, Address offset: 0x20 */ - __IO uint32_t CWSIZER; /*!< DCMI crop window size, Address offset: 0x24 */ - __IO uint32_t DR; /*!< DCMI data register, Address offset: 0x28 */ -} DCMI_TypeDef; - -/** - * @brief Controller Area Network TxMailBox - */ - -typedef struct -{ - __IO uint32_t TIR; /*!< CAN TX mailbox identifier register */ - __IO uint32_t TDTR; /*!< CAN mailbox data length control and time stamp register */ - __IO uint32_t TDLR; /*!< CAN mailbox data low register */ - __IO uint32_t TDHR; /*!< CAN mailbox data high register */ -} CAN_TxMailBox_TypeDef; - -/** - * @brief Controller Area Network FIFOMailBox - */ - -typedef struct -{ - __IO uint32_t RIR; /*!< CAN receive FIFO mailbox identifier register */ - __IO uint32_t RDTR; /*!< CAN receive FIFO mailbox data length control and time stamp register */ - __IO uint32_t RDLR; /*!< CAN receive FIFO mailbox data low register */ - __IO uint32_t RDHR; /*!< CAN receive FIFO mailbox data high register */ -} CAN_FIFOMailBox_TypeDef; - -/** - * @brief Controller Area Network FilterRegister - */ - -typedef struct -{ - __IO uint32_t FR1; /*!< CAN Filter bank register 1 */ - __IO uint32_t FR2; /*!< CAN Filter bank register 1 */ -} CAN_FilterRegister_TypeDef; - -/** - * @brief Controller Area Network - */ - -typedef struct -{ - __IO uint32_t MCR; /*!< CAN master control register, Address offset: 0x00 */ - __IO uint32_t MSR; /*!< CAN master status register, Address offset: 0x04 */ - __IO uint32_t TSR; /*!< CAN transmit status register, Address offset: 0x08 */ - __IO uint32_t RF0R; /*!< CAN receive FIFO 0 register, Address offset: 0x0C */ - __IO uint32_t RF1R; /*!< CAN receive FIFO 1 register, Address offset: 0x10 */ - __IO uint32_t IER; /*!< CAN interrupt enable register, Address offset: 0x14 */ - __IO uint32_t ESR; /*!< CAN error status register, Address offset: 0x18 */ - __IO uint32_t BTR; /*!< CAN bit timing register, Address offset: 0x1C */ - uint32_t RESERVED0[88]; /*!< Reserved, 0x020 - 0x17F */ - CAN_TxMailBox_TypeDef sTxMailBox[3]; /*!< CAN Tx MailBox, Address offset: 0x180 - 0x1AC */ - CAN_FIFOMailBox_TypeDef sFIFOMailBox[2]; /*!< CAN FIFO MailBox, Address offset: 0x1B0 - 0x1CC */ - uint32_t RESERVED1[12]; /*!< Reserved, 0x1D0 - 0x1FF */ - __IO uint32_t FMR; /*!< CAN filter master register, Address offset: 0x200 */ - __IO uint32_t FM1R; /*!< CAN filter mode register, Address offset: 0x204 */ - uint32_t RESERVED2; /*!< Reserved, 0x208 */ - __IO uint32_t FS1R; /*!< CAN filter scale register, Address offset: 0x20C */ - uint32_t RESERVED3; /*!< Reserved, 0x210 */ - __IO uint32_t FFA1R; /*!< CAN filter FIFO assignment register, Address offset: 0x214 */ - uint32_t RESERVED4; /*!< Reserved, 0x218 */ - __IO uint32_t FA1R; /*!< CAN filter activation register, Address offset: 0x21C */ - uint32_t RESERVED5[8]; /*!< Reserved, 0x220-0x23F */ - CAN_FilterRegister_TypeDef sFilterRegister[28]; /*!< CAN Filter Register, Address offset: 0x240-0x31C */ -} CAN_TypeDef; - - -/** - * @brief Comparator - */ - -typedef struct -{ - __IO uint32_t CSR; /*!< COMP control and status register, Address offset: 0x00 */ -} COMP_TypeDef; - -typedef struct -{ - __IO uint32_t CSR; /*!< COMP control and status register, used for bits common to several COMP instances, Address offset: 0x00 */ -} COMP_Common_TypeDef; - -/** - * @brief CRC calculation unit - */ - -typedef struct -{ - __IO uint32_t DR; /*!< CRC Data register, Address offset: 0x00 */ - __IO uint8_t IDR; /*!< CRC Independent data register, Address offset: 0x04 */ - uint8_t RESERVED0; /*!< Reserved, 0x05 */ - uint16_t RESERVED1; /*!< Reserved, 0x06 */ - __IO uint32_t CR; /*!< CRC Control register, Address offset: 0x08 */ - uint32_t RESERVED2; /*!< Reserved, 0x0C */ - __IO uint32_t INIT; /*!< Initial CRC value register, Address offset: 0x10 */ - __IO uint32_t POL; /*!< CRC polynomial register, Address offset: 0x14 */ -} CRC_TypeDef; - -/** - * @brief Clock Recovery System - */ -typedef struct -{ -__IO uint32_t CR; /*!< CRS ccontrol register, Address offset: 0x00 */ -__IO uint32_t CFGR; /*!< CRS configuration register, Address offset: 0x04 */ -__IO uint32_t ISR; /*!< CRS interrupt and status register, Address offset: 0x08 */ -__IO uint32_t ICR; /*!< CRS interrupt flag clear register, Address offset: 0x0C */ -} CRS_TypeDef; - -/** - * @brief Digital to Analog Converter - */ - -typedef struct -{ - __IO uint32_t CR; /*!< DAC control register, Address offset: 0x00 */ - __IO uint32_t SWTRIGR; /*!< DAC software trigger register, Address offset: 0x04 */ - __IO uint32_t DHR12R1; /*!< DAC channel1 12-bit right-aligned data holding register, Address offset: 0x08 */ - __IO uint32_t DHR12L1; /*!< DAC channel1 12-bit left aligned data holding register, Address offset: 0x0C */ - __IO uint32_t DHR8R1; /*!< DAC channel1 8-bit right aligned data holding register, Address offset: 0x10 */ - __IO uint32_t DHR12R2; /*!< DAC channel2 12-bit right aligned data holding register, Address offset: 0x14 */ - __IO uint32_t DHR12L2; /*!< DAC channel2 12-bit left aligned data holding register, Address offset: 0x18 */ - __IO uint32_t DHR8R2; /*!< DAC channel2 8-bit right-aligned data holding register, Address offset: 0x1C */ - __IO uint32_t DHR12RD; /*!< Dual DAC 12-bit right-aligned data holding register, Address offset: 0x20 */ - __IO uint32_t DHR12LD; /*!< DUAL DAC 12-bit left aligned data holding register, Address offset: 0x24 */ - __IO uint32_t DHR8RD; /*!< DUAL DAC 8-bit right aligned data holding register, Address offset: 0x28 */ - __IO uint32_t DOR1; /*!< DAC channel1 data output register, Address offset: 0x2C */ - __IO uint32_t DOR2; /*!< DAC channel2 data output register, Address offset: 0x30 */ - __IO uint32_t SR; /*!< DAC status register, Address offset: 0x34 */ - __IO uint32_t CCR; /*!< DAC calibration control register, Address offset: 0x38 */ - __IO uint32_t MCR; /*!< DAC mode control register, Address offset: 0x3C */ - __IO uint32_t SHSR1; /*!< DAC Sample and Hold sample time register 1, Address offset: 0x40 */ - __IO uint32_t SHSR2; /*!< DAC Sample and Hold sample time register 2, Address offset: 0x44 */ - __IO uint32_t SHHR; /*!< DAC Sample and Hold hold time register, Address offset: 0x48 */ - __IO uint32_t SHRR; /*!< DAC Sample and Hold refresh time register, Address offset: 0x4C */ -} DAC_TypeDef; - -/** - * @brief DFSDM module registers - */ -typedef struct -{ - __IO uint32_t FLTCR1; /*!< DFSDM control register1, Address offset: 0x100 */ - __IO uint32_t FLTCR2; /*!< DFSDM control register2, Address offset: 0x104 */ - __IO uint32_t FLTISR; /*!< DFSDM interrupt and status register, Address offset: 0x108 */ - __IO uint32_t FLTICR; /*!< DFSDM interrupt flag clear register, Address offset: 0x10C */ - __IO uint32_t FLTJCHGR; /*!< DFSDM injected channel group selection register, Address offset: 0x110 */ - __IO uint32_t FLTFCR; /*!< DFSDM filter control register, Address offset: 0x114 */ - __IO uint32_t FLTJDATAR; /*!< DFSDM data register for injected group, Address offset: 0x118 */ - __IO uint32_t FLTRDATAR; /*!< DFSDM data register for regular group, Address offset: 0x11C */ - __IO uint32_t FLTAWHTR; /*!< DFSDM analog watchdog high threshold register, Address offset: 0x120 */ - __IO uint32_t FLTAWLTR; /*!< DFSDM analog watchdog low threshold register, Address offset: 0x124 */ - __IO uint32_t FLTAWSR; /*!< DFSDM analog watchdog status register Address offset: 0x128 */ - __IO uint32_t FLTAWCFR; /*!< DFSDM analog watchdog clear flag register Address offset: 0x12C */ - __IO uint32_t FLTEXMAX; /*!< DFSDM extreme detector maximum register, Address offset: 0x130 */ - __IO uint32_t FLTEXMIN; /*!< DFSDM extreme detector minimum register Address offset: 0x134 */ - __IO uint32_t FLTCNVTIMR; /*!< DFSDM conversion timer, Address offset: 0x138 */ -} DFSDM_Filter_TypeDef; - -/** - * @brief DFSDM channel configuration registers - */ -typedef struct -{ - __IO uint32_t CHCFGR1; /*!< DFSDM channel configuration register1, Address offset: 0x00 */ - __IO uint32_t CHCFGR2; /*!< DFSDM channel configuration register2, Address offset: 0x04 */ - __IO uint32_t CHAWSCDR; /*!< DFSDM channel analog watchdog and - short circuit detector register, Address offset: 0x08 */ - __IO uint32_t CHWDATAR; /*!< DFSDM channel watchdog filter data register, Address offset: 0x0C */ - __IO uint32_t CHDATINR; /*!< DFSDM channel data input register, Address offset: 0x10 */ -} DFSDM_Channel_TypeDef; - -/** - * @brief Debug MCU - */ - -typedef struct -{ - __IO uint32_t IDCODE; /*!< MCU device ID code, Address offset: 0x00 */ - __IO uint32_t CR; /*!< Debug MCU configuration register, Address offset: 0x04 */ - __IO uint32_t APB1FZR1; /*!< Debug MCU APB1 freeze register 1, Address offset: 0x08 */ - __IO uint32_t APB1FZR2; /*!< Debug MCU APB1 freeze register 2, Address offset: 0x0C */ - __IO uint32_t APB2FZ; /*!< Debug MCU APB2 freeze register, Address offset: 0x10 */ -} DBGMCU_TypeDef; - - -/** - * @brief DMA Controller - */ - -typedef struct -{ - __IO uint32_t CCR; /*!< DMA channel x configuration register */ - __IO uint32_t CNDTR; /*!< DMA channel x number of data register */ - __IO uint32_t CPAR; /*!< DMA channel x peripheral address register */ - __IO uint32_t CMAR; /*!< DMA channel x memory address register */ -} DMA_Channel_TypeDef; - -typedef struct -{ - __IO uint32_t ISR; /*!< DMA interrupt status register, Address offset: 0x00 */ - __IO uint32_t IFCR; /*!< DMA interrupt flag clear register, Address offset: 0x04 */ -} DMA_TypeDef; - -typedef struct -{ - __IO uint32_t CSELR; /*!< DMA channel selection register */ -} DMA_Request_TypeDef; - -/* Legacy define */ -#define DMA_request_TypeDef DMA_Request_TypeDef - - -/** - * @brief DMA2D Controller - */ - -typedef struct -{ - __IO uint32_t CR; /*!< DMA2D Control Register, Address offset: 0x00 */ - __IO uint32_t ISR; /*!< DMA2D Interrupt Status Register, Address offset: 0x04 */ - __IO uint32_t IFCR; /*!< DMA2D Interrupt Flag Clear Register, Address offset: 0x08 */ - __IO uint32_t FGMAR; /*!< DMA2D Foreground Memory Address Register, Address offset: 0x0C */ - __IO uint32_t FGOR; /*!< DMA2D Foreground Offset Register, Address offset: 0x10 */ - __IO uint32_t BGMAR; /*!< DMA2D Background Memory Address Register, Address offset: 0x14 */ - __IO uint32_t BGOR; /*!< DMA2D Background Offset Register, Address offset: 0x18 */ - __IO uint32_t FGPFCCR; /*!< DMA2D Foreground PFC Control Register, Address offset: 0x1C */ - __IO uint32_t FGCOLR; /*!< DMA2D Foreground Color Register, Address offset: 0x20 */ - __IO uint32_t BGPFCCR; /*!< DMA2D Background PFC Control Register, Address offset: 0x24 */ - __IO uint32_t BGCOLR; /*!< DMA2D Background Color Register, Address offset: 0x28 */ - __IO uint32_t FGCMAR; /*!< DMA2D Foreground CLUT Memory Address Register, Address offset: 0x2C */ - __IO uint32_t BGCMAR; /*!< DMA2D Background CLUT Memory Address Register, Address offset: 0x30 */ - __IO uint32_t OPFCCR; /*!< DMA2D Output PFC Control Register, Address offset: 0x34 */ - __IO uint32_t OCOLR; /*!< DMA2D Output Color Register, Address offset: 0x38 */ - __IO uint32_t OMAR; /*!< DMA2D Output Memory Address Register, Address offset: 0x3C */ - __IO uint32_t OOR; /*!< DMA2D Output Offset Register, Address offset: 0x40 */ - __IO uint32_t NLR; /*!< DMA2D Number of Line Register, Address offset: 0x44 */ - __IO uint32_t LWR; /*!< DMA2D Line Watermark Register, Address offset: 0x48 */ - __IO uint32_t AMTCR; /*!< DMA2D AHB Master Timer Configuration Register, Address offset: 0x4C */ - uint32_t RESERVED[236]; /*!< Reserved, Address offset: 0x50-0x3FF */ - __IO uint32_t FGCLUT[256]; /*!< DMA2D Foreground CLUT, Address offset:0x400-0x7FF */ - __IO uint32_t BGCLUT[256]; /*!< DMA2D Background CLUT, Address offset:0x800-0xBFF */ -} DMA2D_TypeDef; - -/** - * @brief External Interrupt/Event Controller - */ - -typedef struct -{ - __IO uint32_t IMR1; /*!< EXTI Interrupt mask register 1, Address offset: 0x00 */ - __IO uint32_t EMR1; /*!< EXTI Event mask register 1, Address offset: 0x04 */ - __IO uint32_t RTSR1; /*!< EXTI Rising trigger selection register 1, Address offset: 0x08 */ - __IO uint32_t FTSR1; /*!< EXTI Falling trigger selection register 1, Address offset: 0x0C */ - __IO uint32_t SWIER1; /*!< EXTI Software interrupt event register 1, Address offset: 0x10 */ - __IO uint32_t PR1; /*!< EXTI Pending register 1, Address offset: 0x14 */ - uint32_t RESERVED1; /*!< Reserved, 0x18 */ - uint32_t RESERVED2; /*!< Reserved, 0x1C */ - __IO uint32_t IMR2; /*!< EXTI Interrupt mask register 2, Address offset: 0x20 */ - __IO uint32_t EMR2; /*!< EXTI Event mask register 2, Address offset: 0x24 */ - __IO uint32_t RTSR2; /*!< EXTI Rising trigger selection register 2, Address offset: 0x28 */ - __IO uint32_t FTSR2; /*!< EXTI Falling trigger selection register 2, Address offset: 0x2C */ - __IO uint32_t SWIER2; /*!< EXTI Software interrupt event register 2, Address offset: 0x30 */ - __IO uint32_t PR2; /*!< EXTI Pending register 2, Address offset: 0x34 */ -} EXTI_TypeDef; - - -/** - * @brief Firewall - */ - -typedef struct -{ - __IO uint32_t CSSA; /*!< Code Segment Start Address register, Address offset: 0x00 */ - __IO uint32_t CSL; /*!< Code Segment Length register, Address offset: 0x04 */ - __IO uint32_t NVDSSA; /*!< NON volatile data Segment Start Address register, Address offset: 0x08 */ - __IO uint32_t NVDSL; /*!< NON volatile data Segment Length register, Address offset: 0x0C */ - __IO uint32_t VDSSA ; /*!< Volatile data Segment Start Address register, Address offset: 0x10 */ - __IO uint32_t VDSL ; /*!< Volatile data Segment Length register, Address offset: 0x14 */ - uint32_t RESERVED1; /*!< Reserved1, Address offset: 0x18 */ - uint32_t RESERVED2; /*!< Reserved2, Address offset: 0x1C */ - __IO uint32_t CR ; /*!< Configuration register, Address offset: 0x20 */ -} FIREWALL_TypeDef; - - -/** - * @brief FLASH Registers - */ - -typedef struct -{ - __IO uint32_t ACR; /*!< FLASH access control register, Address offset: 0x00 */ - __IO uint32_t PDKEYR; /*!< FLASH power down key register, Address offset: 0x04 */ - __IO uint32_t KEYR; /*!< FLASH key register, Address offset: 0x08 */ - __IO uint32_t OPTKEYR; /*!< FLASH option key register, Address offset: 0x0C */ - __IO uint32_t SR; /*!< FLASH status register, Address offset: 0x10 */ - __IO uint32_t CR; /*!< FLASH control register, Address offset: 0x14 */ - __IO uint32_t ECCR; /*!< FLASH ECC register, Address offset: 0x18 */ - __IO uint32_t RESERVED1; /*!< Reserved1, Address offset: 0x1C */ - __IO uint32_t OPTR; /*!< FLASH option register, Address offset: 0x20 */ - __IO uint32_t PCROP1SR; /*!< FLASH bank1 PCROP start address register, Address offset: 0x24 */ - __IO uint32_t PCROP1ER; /*!< FLASH bank1 PCROP end address register, Address offset: 0x28 */ - __IO uint32_t WRP1AR; /*!< FLASH bank1 WRP area A address register, Address offset: 0x2C */ - __IO uint32_t WRP1BR; /*!< FLASH bank1 WRP area B address register, Address offset: 0x30 */ - uint32_t RESERVED2[4]; /*!< Reserved2, Address offset: 0x34-0x40 */ - __IO uint32_t PCROP2SR; /*!< FLASH bank2 PCROP start address register, Address offset: 0x44 */ - __IO uint32_t PCROP2ER; /*!< FLASH bank2 PCROP end address register, Address offset: 0x48 */ - __IO uint32_t WRP2AR; /*!< FLASH bank2 WRP area A address register, Address offset: 0x4C */ - __IO uint32_t WRP2BR; /*!< FLASH bank2 WRP area B address register, Address offset: 0x50 */ -} FLASH_TypeDef; - - -/** - * @brief Flexible Memory Controller - */ - -typedef struct -{ - __IO uint32_t BTCR[8]; /*!< NOR/PSRAM chip-select control register(BCR) and chip-select timing register(BTR), Address offset: 0x00-1C */ -} FMC_Bank1_TypeDef; - -/** - * @brief Flexible Memory Controller Bank1E - */ - -typedef struct -{ - __IO uint32_t BWTR[7]; /*!< NOR/PSRAM write timing registers, Address offset: 0x104-0x11C */ -} FMC_Bank1E_TypeDef; - -/** - * @brief Flexible Memory Controller Bank3 - */ - -typedef struct -{ - __IO uint32_t PCR; /*!< NAND Flash control register, Address offset: 0x80 */ - __IO uint32_t SR; /*!< NAND Flash FIFO status and interrupt register, Address offset: 0x84 */ - __IO uint32_t PMEM; /*!< NAND Flash Common memory space timing register, Address offset: 0x88 */ - __IO uint32_t PATT; /*!< NAND Flash Attribute memory space timing register, Address offset: 0x8C */ - uint32_t RESERVED0; /*!< Reserved, 0x90 */ - __IO uint32_t ECCR; /*!< NAND Flash ECC result registers, Address offset: 0x94 */ -} FMC_Bank3_TypeDef; - -/** - * @brief General Purpose I/O - */ - -typedef struct -{ - __IO uint32_t MODER; /*!< GPIO port mode register, Address offset: 0x00 */ - __IO uint32_t OTYPER; /*!< GPIO port output type register, Address offset: 0x04 */ - __IO uint32_t OSPEEDR; /*!< GPIO port output speed register, Address offset: 0x08 */ - __IO uint32_t PUPDR; /*!< GPIO port pull-up/pull-down register, Address offset: 0x0C */ - __IO uint32_t IDR; /*!< GPIO port input data register, Address offset: 0x10 */ - __IO uint32_t ODR; /*!< GPIO port output data register, Address offset: 0x14 */ - __IO uint32_t BSRR; /*!< GPIO port bit set/reset register, Address offset: 0x18 */ - __IO uint32_t LCKR; /*!< GPIO port configuration lock register, Address offset: 0x1C */ - __IO uint32_t AFR[2]; /*!< GPIO alternate function registers, Address offset: 0x20-0x24 */ - __IO uint32_t BRR; /*!< GPIO Bit Reset register, Address offset: 0x28 */ - -} GPIO_TypeDef; - - -/** - * @brief Inter-integrated Circuit Interface - */ - -typedef struct -{ - __IO uint32_t CR1; /*!< I2C Control register 1, Address offset: 0x00 */ - __IO uint32_t CR2; /*!< I2C Control register 2, Address offset: 0x04 */ - __IO uint32_t OAR1; /*!< I2C Own address 1 register, Address offset: 0x08 */ - __IO uint32_t OAR2; /*!< I2C Own address 2 register, Address offset: 0x0C */ - __IO uint32_t TIMINGR; /*!< I2C Timing register, Address offset: 0x10 */ - __IO uint32_t TIMEOUTR; /*!< I2C Timeout register, Address offset: 0x14 */ - __IO uint32_t ISR; /*!< I2C Interrupt and status register, Address offset: 0x18 */ - __IO uint32_t ICR; /*!< I2C Interrupt clear register, Address offset: 0x1C */ - __IO uint32_t PECR; /*!< I2C PEC register, Address offset: 0x20 */ - __IO uint32_t RXDR; /*!< I2C Receive data register, Address offset: 0x24 */ - __IO uint32_t TXDR; /*!< I2C Transmit data register, Address offset: 0x28 */ -} I2C_TypeDef; - -/** - * @brief Independent WATCHDOG - */ - -typedef struct -{ - __IO uint32_t KR; /*!< IWDG Key register, Address offset: 0x00 */ - __IO uint32_t PR; /*!< IWDG Prescaler register, Address offset: 0x04 */ - __IO uint32_t RLR; /*!< IWDG Reload register, Address offset: 0x08 */ - __IO uint32_t SR; /*!< IWDG Status register, Address offset: 0x0C */ - __IO uint32_t WINR; /*!< IWDG Window register, Address offset: 0x10 */ -} IWDG_TypeDef; - -/** - * @brief LCD - */ - -typedef struct -{ - __IO uint32_t CR; /*!< LCD control register, Address offset: 0x00 */ - __IO uint32_t FCR; /*!< LCD frame control register, Address offset: 0x04 */ - __IO uint32_t SR; /*!< LCD status register, Address offset: 0x08 */ - __IO uint32_t CLR; /*!< LCD clear register, Address offset: 0x0C */ - uint32_t RESERVED; /*!< Reserved, Address offset: 0x10 */ - __IO uint32_t RAM[16]; /*!< LCD display memory, Address offset: 0x14-0x50 */ -} LCD_TypeDef; - -/** - * @brief LPTIMER - */ -typedef struct -{ - __IO uint32_t ISR; /*!< LPTIM Interrupt and Status register, Address offset: 0x00 */ - __IO uint32_t ICR; /*!< LPTIM Interrupt Clear register, Address offset: 0x04 */ - __IO uint32_t IER; /*!< LPTIM Interrupt Enable register, Address offset: 0x08 */ - __IO uint32_t CFGR; /*!< LPTIM Configuration register, Address offset: 0x0C */ - __IO uint32_t CR; /*!< LPTIM Control register, Address offset: 0x10 */ - __IO uint32_t CMP; /*!< LPTIM Compare register, Address offset: 0x14 */ - __IO uint32_t ARR; /*!< LPTIM Autoreload register, Address offset: 0x18 */ - __IO uint32_t CNT; /*!< LPTIM Counter register, Address offset: 0x1C */ - __IO uint32_t OR; /*!< LPTIM Option register, Address offset: 0x20 */ -} LPTIM_TypeDef; - -/** - * @brief Operational Amplifier (OPAMP) - */ - -typedef struct -{ - __IO uint32_t CSR; /*!< OPAMP control/status register, Address offset: 0x00 */ - __IO uint32_t OTR; /*!< OPAMP offset trimming register for normal mode, Address offset: 0x04 */ - __IO uint32_t LPOTR; /*!< OPAMP offset trimming register for low power mode, Address offset: 0x08 */ -} OPAMP_TypeDef; - -typedef struct -{ - __IO uint32_t CSR; /*!< OPAMP control/status register, used for bits common to several OPAMP instances, Address offset: 0x00 */ -} OPAMP_Common_TypeDef; - -/** - * @brief Power Control - */ - -typedef struct -{ - __IO uint32_t CR1; /*!< PWR power control register 1, Address offset: 0x00 */ - __IO uint32_t CR2; /*!< PWR power control register 2, Address offset: 0x04 */ - __IO uint32_t CR3; /*!< PWR power control register 3, Address offset: 0x08 */ - __IO uint32_t CR4; /*!< PWR power control register 4, Address offset: 0x0C */ - __IO uint32_t SR1; /*!< PWR power status register 1, Address offset: 0x10 */ - __IO uint32_t SR2; /*!< PWR power status register 2, Address offset: 0x14 */ - __IO uint32_t SCR; /*!< PWR power status reset register, Address offset: 0x18 */ - uint32_t RESERVED; /*!< Reserved, Address offset: 0x1C */ - __IO uint32_t PUCRA; /*!< Pull_up control register of portA, Address offset: 0x20 */ - __IO uint32_t PDCRA; /*!< Pull_Down control register of portA, Address offset: 0x24 */ - __IO uint32_t PUCRB; /*!< Pull_up control register of portB, Address offset: 0x28 */ - __IO uint32_t PDCRB; /*!< Pull_Down control register of portB, Address offset: 0x2C */ - __IO uint32_t PUCRC; /*!< Pull_up control register of portC, Address offset: 0x30 */ - __IO uint32_t PDCRC; /*!< Pull_Down control register of portC, Address offset: 0x34 */ - __IO uint32_t PUCRD; /*!< Pull_up control register of portD, Address offset: 0x38 */ - __IO uint32_t PDCRD; /*!< Pull_Down control register of portD, Address offset: 0x3C */ - __IO uint32_t PUCRE; /*!< Pull_up control register of portE, Address offset: 0x40 */ - __IO uint32_t PDCRE; /*!< Pull_Down control register of portE, Address offset: 0x44 */ - __IO uint32_t PUCRF; /*!< Pull_up control register of portF, Address offset: 0x48 */ - __IO uint32_t PDCRF; /*!< Pull_Down control register of portF, Address offset: 0x4C */ - __IO uint32_t PUCRG; /*!< Pull_up control register of portG, Address offset: 0x50 */ - __IO uint32_t PDCRG; /*!< Pull_Down control register of portG, Address offset: 0x54 */ - __IO uint32_t PUCRH; /*!< Pull_up control register of portH, Address offset: 0x58 */ - __IO uint32_t PDCRH; /*!< Pull_Down control register of portH, Address offset: 0x5C */ - __IO uint32_t PUCRI; /*!< Pull_up control register of portI, Address offset: 0x60 */ - __IO uint32_t PDCRI; /*!< Pull_Down control register of portI, Address offset: 0x64 */ -} PWR_TypeDef; - - -/** - * @brief QUAD Serial Peripheral Interface - */ - -typedef struct -{ - __IO uint32_t CR; /*!< QUADSPI Control register, Address offset: 0x00 */ - __IO uint32_t DCR; /*!< QUADSPI Device Configuration register, Address offset: 0x04 */ - __IO uint32_t SR; /*!< QUADSPI Status register, Address offset: 0x08 */ - __IO uint32_t FCR; /*!< QUADSPI Flag Clear register, Address offset: 0x0C */ - __IO uint32_t DLR; /*!< QUADSPI Data Length register, Address offset: 0x10 */ - __IO uint32_t CCR; /*!< QUADSPI Communication Configuration register, Address offset: 0x14 */ - __IO uint32_t AR; /*!< QUADSPI Address register, Address offset: 0x18 */ - __IO uint32_t ABR; /*!< QUADSPI Alternate Bytes register, Address offset: 0x1C */ - __IO uint32_t DR; /*!< QUADSPI Data register, Address offset: 0x20 */ - __IO uint32_t PSMKR; /*!< QUADSPI Polling Status Mask register, Address offset: 0x24 */ - __IO uint32_t PSMAR; /*!< QUADSPI Polling Status Match register, Address offset: 0x28 */ - __IO uint32_t PIR; /*!< QUADSPI Polling Interval register, Address offset: 0x2C */ - __IO uint32_t LPTR; /*!< QUADSPI Low Power Timeout register, Address offset: 0x30 */ -} QUADSPI_TypeDef; - - -/** - * @brief Reset and Clock Control - */ - -typedef struct -{ - __IO uint32_t CR; /*!< RCC clock control register, Address offset: 0x00 */ - __IO uint32_t ICSCR; /*!< RCC internal clock sources calibration register, Address offset: 0x04 */ - __IO uint32_t CFGR; /*!< RCC clock configuration register, Address offset: 0x08 */ - __IO uint32_t PLLCFGR; /*!< RCC system PLL configuration register, Address offset: 0x0C */ - __IO uint32_t PLLSAI1CFGR; /*!< RCC PLL SAI1 configuration register, Address offset: 0x10 */ - __IO uint32_t PLLSAI2CFGR; /*!< RCC PLL SAI2 configuration register, Address offset: 0x14 */ - __IO uint32_t CIER; /*!< RCC clock interrupt enable register, Address offset: 0x18 */ - __IO uint32_t CIFR; /*!< RCC clock interrupt flag register, Address offset: 0x1C */ - __IO uint32_t CICR; /*!< RCC clock interrupt clear register, Address offset: 0x20 */ - uint32_t RESERVED0; /*!< Reserved, Address offset: 0x24 */ - __IO uint32_t AHB1RSTR; /*!< RCC AHB1 peripheral reset register, Address offset: 0x28 */ - __IO uint32_t AHB2RSTR; /*!< RCC AHB2 peripheral reset register, Address offset: 0x2C */ - __IO uint32_t AHB3RSTR; /*!< RCC AHB3 peripheral reset register, Address offset: 0x30 */ - uint32_t RESERVED1; /*!< Reserved, Address offset: 0x34 */ - __IO uint32_t APB1RSTR1; /*!< RCC APB1 peripheral reset register 1, Address offset: 0x38 */ - __IO uint32_t APB1RSTR2; /*!< RCC APB1 peripheral reset register 2, Address offset: 0x3C */ - __IO uint32_t APB2RSTR; /*!< RCC APB2 peripheral reset register, Address offset: 0x40 */ - uint32_t RESERVED2; /*!< Reserved, Address offset: 0x44 */ - __IO uint32_t AHB1ENR; /*!< RCC AHB1 peripheral clocks enable register, Address offset: 0x48 */ - __IO uint32_t AHB2ENR; /*!< RCC AHB2 peripheral clocks enable register, Address offset: 0x4C */ - __IO uint32_t AHB3ENR; /*!< RCC AHB3 peripheral clocks enable register, Address offset: 0x50 */ - uint32_t RESERVED3; /*!< Reserved, Address offset: 0x54 */ - __IO uint32_t APB1ENR1; /*!< RCC APB1 peripheral clocks enable register 1, Address offset: 0x58 */ - __IO uint32_t APB1ENR2; /*!< RCC APB1 peripheral clocks enable register 2, Address offset: 0x5C */ - __IO uint32_t APB2ENR; /*!< RCC APB2 peripheral clocks enable register, Address offset: 0x60 */ - uint32_t RESERVED4; /*!< Reserved, Address offset: 0x64 */ - __IO uint32_t AHB1SMENR; /*!< RCC AHB1 peripheral clocks enable in sleep and stop modes register, Address offset: 0x68 */ - __IO uint32_t AHB2SMENR; /*!< RCC AHB2 peripheral clocks enable in sleep and stop modes register, Address offset: 0x6C */ - __IO uint32_t AHB3SMENR; /*!< RCC AHB3 peripheral clocks enable in sleep and stop modes register, Address offset: 0x70 */ - uint32_t RESERVED5; /*!< Reserved, Address offset: 0x74 */ - __IO uint32_t APB1SMENR1; /*!< RCC APB1 peripheral clocks enable in sleep mode and stop modes register 1, Address offset: 0x78 */ - __IO uint32_t APB1SMENR2; /*!< RCC APB1 peripheral clocks enable in sleep mode and stop modes register 2, Address offset: 0x7C */ - __IO uint32_t APB2SMENR; /*!< RCC APB2 peripheral clocks enable in sleep mode and stop modes register, Address offset: 0x80 */ - uint32_t RESERVED6; /*!< Reserved, Address offset: 0x84 */ - __IO uint32_t CCIPR; /*!< RCC peripherals independent clock configuration register, Address offset: 0x88 */ - uint32_t RESERVED7; /*!< Reserved, Address offset: 0x8C */ - __IO uint32_t BDCR; /*!< RCC backup domain control register, Address offset: 0x90 */ - __IO uint32_t CSR; /*!< RCC clock control & status register, Address offset: 0x94 */ - __IO uint32_t CRRCR; /*!< RCC clock recovery RC register, Address offset: 0x98 */ - __IO uint32_t CCIPR2; /*!< RCC peripherals independent clock configuration register 2, Address offset: 0x9C */ -} RCC_TypeDef; - -/** - * @brief Real-Time Clock - */ - -typedef struct -{ - __IO uint32_t TR; /*!< RTC time register, Address offset: 0x00 */ - __IO uint32_t DR; /*!< RTC date register, Address offset: 0x04 */ - __IO uint32_t CR; /*!< RTC control register, Address offset: 0x08 */ - __IO uint32_t ISR; /*!< RTC initialization and status register, Address offset: 0x0C */ - __IO uint32_t PRER; /*!< RTC prescaler register, Address offset: 0x10 */ - __IO uint32_t WUTR; /*!< RTC wakeup timer register, Address offset: 0x14 */ - uint32_t reserved; /*!< Reserved */ - __IO uint32_t ALRMAR; /*!< RTC alarm A register, Address offset: 0x1C */ - __IO uint32_t ALRMBR; /*!< RTC alarm B register, Address offset: 0x20 */ - __IO uint32_t WPR; /*!< RTC write protection register, Address offset: 0x24 */ - __IO uint32_t SSR; /*!< RTC sub second register, Address offset: 0x28 */ - __IO uint32_t SHIFTR; /*!< RTC shift control register, Address offset: 0x2C */ - __IO uint32_t TSTR; /*!< RTC time stamp time register, Address offset: 0x30 */ - __IO uint32_t TSDR; /*!< RTC time stamp date register, Address offset: 0x34 */ - __IO uint32_t TSSSR; /*!< RTC time-stamp sub second register, Address offset: 0x38 */ - __IO uint32_t CALR; /*!< RTC calibration register, Address offset: 0x3C */ - __IO uint32_t TAMPCR; /*!< RTC tamper configuration register, Address offset: 0x40 */ - __IO uint32_t ALRMASSR; /*!< RTC alarm A sub second register, Address offset: 0x44 */ - __IO uint32_t ALRMBSSR; /*!< RTC alarm B sub second register, Address offset: 0x48 */ - __IO uint32_t OR; /*!< RTC option register, Address offset: 0x4C */ - __IO uint32_t BKP0R; /*!< RTC backup register 0, Address offset: 0x50 */ - __IO uint32_t BKP1R; /*!< RTC backup register 1, Address offset: 0x54 */ - __IO uint32_t BKP2R; /*!< RTC backup register 2, Address offset: 0x58 */ - __IO uint32_t BKP3R; /*!< RTC backup register 3, Address offset: 0x5C */ - __IO uint32_t BKP4R; /*!< RTC backup register 4, Address offset: 0x60 */ - __IO uint32_t BKP5R; /*!< RTC backup register 5, Address offset: 0x64 */ - __IO uint32_t BKP6R; /*!< RTC backup register 6, Address offset: 0x68 */ - __IO uint32_t BKP7R; /*!< RTC backup register 7, Address offset: 0x6C */ - __IO uint32_t BKP8R; /*!< RTC backup register 8, Address offset: 0x70 */ - __IO uint32_t BKP9R; /*!< RTC backup register 9, Address offset: 0x74 */ - __IO uint32_t BKP10R; /*!< RTC backup register 10, Address offset: 0x78 */ - __IO uint32_t BKP11R; /*!< RTC backup register 11, Address offset: 0x7C */ - __IO uint32_t BKP12R; /*!< RTC backup register 12, Address offset: 0x80 */ - __IO uint32_t BKP13R; /*!< RTC backup register 13, Address offset: 0x84 */ - __IO uint32_t BKP14R; /*!< RTC backup register 14, Address offset: 0x88 */ - __IO uint32_t BKP15R; /*!< RTC backup register 15, Address offset: 0x8C */ - __IO uint32_t BKP16R; /*!< RTC backup register 16, Address offset: 0x90 */ - __IO uint32_t BKP17R; /*!< RTC backup register 17, Address offset: 0x94 */ - __IO uint32_t BKP18R; /*!< RTC backup register 18, Address offset: 0x98 */ - __IO uint32_t BKP19R; /*!< RTC backup register 19, Address offset: 0x9C */ - __IO uint32_t BKP20R; /*!< RTC backup register 20, Address offset: 0xA0 */ - __IO uint32_t BKP21R; /*!< RTC backup register 21, Address offset: 0xA4 */ - __IO uint32_t BKP22R; /*!< RTC backup register 22, Address offset: 0xA8 */ - __IO uint32_t BKP23R; /*!< RTC backup register 23, Address offset: 0xAC */ - __IO uint32_t BKP24R; /*!< RTC backup register 24, Address offset: 0xB0 */ - __IO uint32_t BKP25R; /*!< RTC backup register 25, Address offset: 0xB4 */ - __IO uint32_t BKP26R; /*!< RTC backup register 26, Address offset: 0xB8 */ - __IO uint32_t BKP27R; /*!< RTC backup register 27, Address offset: 0xBC */ - __IO uint32_t BKP28R; /*!< RTC backup register 28, Address offset: 0xC0 */ - __IO uint32_t BKP29R; /*!< RTC backup register 29, Address offset: 0xC4 */ - __IO uint32_t BKP30R; /*!< RTC backup register 30, Address offset: 0xC8 */ - __IO uint32_t BKP31R; /*!< RTC backup register 31, Address offset: 0xCC */ -} RTC_TypeDef; - -/** - * @brief Serial Audio Interface - */ - -typedef struct -{ - __IO uint32_t GCR; /*!< SAI global configuration register, Address offset: 0x00 */ -} SAI_TypeDef; - -typedef struct -{ - __IO uint32_t CR1; /*!< SAI block x configuration register 1, Address offset: 0x04 */ - __IO uint32_t CR2; /*!< SAI block x configuration register 2, Address offset: 0x08 */ - __IO uint32_t FRCR; /*!< SAI block x frame configuration register, Address offset: 0x0C */ - __IO uint32_t SLOTR; /*!< SAI block x slot register, Address offset: 0x10 */ - __IO uint32_t IMR; /*!< SAI block x interrupt mask register, Address offset: 0x14 */ - __IO uint32_t SR; /*!< SAI block x status register, Address offset: 0x18 */ - __IO uint32_t CLRFR; /*!< SAI block x clear flag register, Address offset: 0x1C */ - __IO uint32_t DR; /*!< SAI block x data register, Address offset: 0x20 */ -} SAI_Block_TypeDef; - - -/** - * @brief Secure digital input/output Interface - */ - -typedef struct -{ - __IO uint32_t POWER; /*!< SDMMC power control register, Address offset: 0x00 */ - __IO uint32_t CLKCR; /*!< SDMMC clock control register, Address offset: 0x04 */ - __IO uint32_t ARG; /*!< SDMMC argument register, Address offset: 0x08 */ - __IO uint32_t CMD; /*!< SDMMC command register, Address offset: 0x0C */ - __I uint32_t RESPCMD; /*!< SDMMC command response register, Address offset: 0x10 */ - __I uint32_t RESP1; /*!< SDMMC response 1 register, Address offset: 0x14 */ - __I uint32_t RESP2; /*!< SDMMC response 2 register, Address offset: 0x18 */ - __I uint32_t RESP3; /*!< SDMMC response 3 register, Address offset: 0x1C */ - __I uint32_t RESP4; /*!< SDMMC response 4 register, Address offset: 0x20 */ - __IO uint32_t DTIMER; /*!< SDMMC data timer register, Address offset: 0x24 */ - __IO uint32_t DLEN; /*!< SDMMC data length register, Address offset: 0x28 */ - __IO uint32_t DCTRL; /*!< SDMMC data control register, Address offset: 0x2C */ - __I uint32_t DCOUNT; /*!< SDMMC data counter register, Address offset: 0x30 */ - __I uint32_t STA; /*!< SDMMC status register, Address offset: 0x34 */ - __IO uint32_t ICR; /*!< SDMMC interrupt clear register, Address offset: 0x38 */ - __IO uint32_t MASK; /*!< SDMMC mask register, Address offset: 0x3C */ - uint32_t RESERVED0[2]; /*!< Reserved, 0x40-0x44 */ - __I uint32_t FIFOCNT; /*!< SDMMC FIFO counter register, Address offset: 0x48 */ - uint32_t RESERVED1[13]; /*!< Reserved, 0x4C-0x7C */ - __IO uint32_t FIFO; /*!< SDMMC data FIFO register, Address offset: 0x80 */ -} SDMMC_TypeDef; - - -/** - * @brief Serial Peripheral Interface - */ - -typedef struct -{ - __IO uint32_t CR1; /*!< SPI Control register 1, Address offset: 0x00 */ - __IO uint32_t CR2; /*!< SPI Control register 2, Address offset: 0x04 */ - __IO uint32_t SR; /*!< SPI Status register, Address offset: 0x08 */ - __IO uint32_t DR; /*!< SPI data register, Address offset: 0x0C */ - __IO uint32_t CRCPR; /*!< SPI CRC polynomial register, Address offset: 0x10 */ - __IO uint32_t RXCRCR; /*!< SPI Rx CRC register, Address offset: 0x14 */ - __IO uint32_t TXCRCR; /*!< SPI Tx CRC register, Address offset: 0x18 */ -} SPI_TypeDef; - - -/** - * @brief Single Wire Protocol Master Interface SPWMI - */ - -typedef struct -{ - __IO uint32_t CR; /*!< SWPMI Configuration/Control register, Address offset: 0x00 */ - __IO uint32_t BRR; /*!< SWPMI bitrate register, Address offset: 0x04 */ - uint32_t RESERVED1; /*!< Reserved, 0x08 */ - __IO uint32_t ISR; /*!< SWPMI Interrupt and Status register, Address offset: 0x0C */ - __IO uint32_t ICR; /*!< SWPMI Interrupt Flag Clear register, Address offset: 0x10 */ - __IO uint32_t IER; /*!< SWPMI Interrupt Enable register, Address offset: 0x14 */ - __IO uint32_t RFL; /*!< SWPMI Receive Frame Length register, Address offset: 0x18 */ - __IO uint32_t TDR; /*!< SWPMI Transmit data register, Address offset: 0x1C */ - __IO uint32_t RDR; /*!< SWPMI Receive data register, Address offset: 0x20 */ - __IO uint32_t OR; /*!< SWPMI Option register, Address offset: 0x24 */ -} SWPMI_TypeDef; - - -/** - * @brief System configuration controller - */ - -typedef struct -{ - __IO uint32_t MEMRMP; /*!< SYSCFG memory remap register, Address offset: 0x00 */ - __IO uint32_t CFGR1; /*!< SYSCFG configuration register 1, Address offset: 0x04 */ - __IO uint32_t EXTICR[4]; /*!< SYSCFG external interrupt configuration registers, Address offset: 0x08-0x14 */ - __IO uint32_t SCSR; /*!< SYSCFG SRAM2 control and status register, Address offset: 0x18 */ - __IO uint32_t CFGR2; /*!< SYSCFG configuration register 2, Address offset: 0x1C */ - __IO uint32_t SWPR; /*!< SYSCFG SRAM2 write protection register, Address offset: 0x20 */ - __IO uint32_t SKR; /*!< SYSCFG SRAM2 key register, Address offset: 0x24 */ - __IO uint32_t SWPR2; /*!< SYSCFG SRAM2 write protection register 2, Address offset: 0x28 */ -} SYSCFG_TypeDef; - - -/** - * @brief TIM - */ - -typedef struct -{ - __IO uint32_t CR1; /*!< TIM control register 1, Address offset: 0x00 */ - __IO uint32_t CR2; /*!< TIM control register 2, Address offset: 0x04 */ - __IO uint32_t SMCR; /*!< TIM slave mode control register, Address offset: 0x08 */ - __IO uint32_t DIER; /*!< TIM DMA/interrupt enable register, Address offset: 0x0C */ - __IO uint32_t SR; /*!< TIM status register, Address offset: 0x10 */ - __IO uint32_t EGR; /*!< TIM event generation register, Address offset: 0x14 */ - __IO uint32_t CCMR1; /*!< TIM capture/compare mode register 1, Address offset: 0x18 */ - __IO uint32_t CCMR2; /*!< TIM capture/compare mode register 2, Address offset: 0x1C */ - __IO uint32_t CCER; /*!< TIM capture/compare enable register, Address offset: 0x20 */ - __IO uint32_t CNT; /*!< TIM counter register, Address offset: 0x24 */ - __IO uint32_t PSC; /*!< TIM prescaler, Address offset: 0x28 */ - __IO uint32_t ARR; /*!< TIM auto-reload register, Address offset: 0x2C */ - __IO uint32_t RCR; /*!< TIM repetition counter register, Address offset: 0x30 */ - __IO uint32_t CCR1; /*!< TIM capture/compare register 1, Address offset: 0x34 */ - __IO uint32_t CCR2; /*!< TIM capture/compare register 2, Address offset: 0x38 */ - __IO uint32_t CCR3; /*!< TIM capture/compare register 3, Address offset: 0x3C */ - __IO uint32_t CCR4; /*!< TIM capture/compare register 4, Address offset: 0x40 */ - __IO uint32_t BDTR; /*!< TIM break and dead-time register, Address offset: 0x44 */ - __IO uint32_t DCR; /*!< TIM DMA control register, Address offset: 0x48 */ - __IO uint32_t DMAR; /*!< TIM DMA address for full transfer, Address offset: 0x4C */ - __IO uint32_t OR1; /*!< TIM option register 1, Address offset: 0x50 */ - __IO uint32_t CCMR3; /*!< TIM capture/compare mode register 3, Address offset: 0x54 */ - __IO uint32_t CCR5; /*!< TIM capture/compare register5, Address offset: 0x58 */ - __IO uint32_t CCR6; /*!< TIM capture/compare register6, Address offset: 0x5C */ - __IO uint32_t OR2; /*!< TIM option register 2, Address offset: 0x60 */ - __IO uint32_t OR3; /*!< TIM option register 3, Address offset: 0x64 */ -} TIM_TypeDef; - - -/** - * @brief Touch Sensing Controller (TSC) - */ - -typedef struct -{ - __IO uint32_t CR; /*!< TSC control register, Address offset: 0x00 */ - __IO uint32_t IER; /*!< TSC interrupt enable register, Address offset: 0x04 */ - __IO uint32_t ICR; /*!< TSC interrupt clear register, Address offset: 0x08 */ - __IO uint32_t ISR; /*!< TSC interrupt status register, Address offset: 0x0C */ - __IO uint32_t IOHCR; /*!< TSC I/O hysteresis control register, Address offset: 0x10 */ - uint32_t RESERVED1; /*!< Reserved, Address offset: 0x14 */ - __IO uint32_t IOASCR; /*!< TSC I/O analog switch control register, Address offset: 0x18 */ - uint32_t RESERVED2; /*!< Reserved, Address offset: 0x1C */ - __IO uint32_t IOSCR; /*!< TSC I/O sampling control register, Address offset: 0x20 */ - uint32_t RESERVED3; /*!< Reserved, Address offset: 0x24 */ - __IO uint32_t IOCCR; /*!< TSC I/O channel control register, Address offset: 0x28 */ - uint32_t RESERVED4; /*!< Reserved, Address offset: 0x2C */ - __IO uint32_t IOGCSR; /*!< TSC I/O group control status register, Address offset: 0x30 */ - __IO uint32_t IOGXCR[8]; /*!< TSC I/O group x counter register, Address offset: 0x34-50 */ -} TSC_TypeDef; - -/** - * @brief Universal Synchronous Asynchronous Receiver Transmitter - */ - -typedef struct -{ - __IO uint32_t CR1; /*!< USART Control register 1, Address offset: 0x00 */ - __IO uint32_t CR2; /*!< USART Control register 2, Address offset: 0x04 */ - __IO uint32_t CR3; /*!< USART Control register 3, Address offset: 0x08 */ - __IO uint32_t BRR; /*!< USART Baud rate register, Address offset: 0x0C */ - __IO uint16_t GTPR; /*!< USART Guard time and prescaler register, Address offset: 0x10 */ - uint16_t RESERVED2; /*!< Reserved, 0x12 */ - __IO uint32_t RTOR; /*!< USART Receiver Time Out register, Address offset: 0x14 */ - __IO uint16_t RQR; /*!< USART Request register, Address offset: 0x18 */ - uint16_t RESERVED3; /*!< Reserved, 0x1A */ - __IO uint32_t ISR; /*!< USART Interrupt and status register, Address offset: 0x1C */ - __IO uint32_t ICR; /*!< USART Interrupt flag Clear register, Address offset: 0x20 */ - __IO uint16_t RDR; /*!< USART Receive Data register, Address offset: 0x24 */ - uint16_t RESERVED4; /*!< Reserved, 0x26 */ - __IO uint16_t TDR; /*!< USART Transmit Data register, Address offset: 0x28 */ - uint16_t RESERVED5; /*!< Reserved, 0x2A */ -} USART_TypeDef; - -/** - * @brief VREFBUF - */ - -typedef struct -{ - __IO uint32_t CSR; /*!< VREFBUF control and status register, Address offset: 0x00 */ - __IO uint32_t CCR; /*!< VREFBUF calibration and control register, Address offset: 0x04 */ -} VREFBUF_TypeDef; - -/** - * @brief Window WATCHDOG - */ - -typedef struct -{ - __IO uint32_t CR; /*!< WWDG Control register, Address offset: 0x00 */ - __IO uint32_t CFR; /*!< WWDG Configuration register, Address offset: 0x04 */ - __IO uint32_t SR; /*!< WWDG Status register, Address offset: 0x08 */ -} WWDG_TypeDef; - -/** - * @brief RNG - */ - -typedef struct -{ - __IO uint32_t CR; /*!< RNG control register, Address offset: 0x00 */ - __IO uint32_t SR; /*!< RNG status register, Address offset: 0x04 */ - __IO uint32_t DR; /*!< RNG data register, Address offset: 0x08 */ -} RNG_TypeDef; - -/** - * @brief USB_OTG_Core_register - */ -typedef struct -{ - __IO uint32_t GOTGCTL; /*!< USB_OTG Control and Status Register 000h*/ - __IO uint32_t GOTGINT; /*!< USB_OTG Interrupt Register 004h*/ - __IO uint32_t GAHBCFG; /*!< Core AHB Configuration Register 008h*/ - __IO uint32_t GUSBCFG; /*!< Core USB Configuration Register 00Ch*/ - __IO uint32_t GRSTCTL; /*!< Core Reset Register 010h*/ - __IO uint32_t GINTSTS; /*!< Core Interrupt Register 014h*/ - __IO uint32_t GINTMSK; /*!< Core Interrupt Mask Register 018h*/ - __IO uint32_t GRXSTSR; /*!< Receive Sts Q Read Register 01Ch*/ - __IO uint32_t GRXSTSP; /*!< Receive Sts Q Read & POP Register 020h*/ - __IO uint32_t GRXFSIZ; /*!< Receive FIFO Size Register 024h*/ - __IO uint32_t DIEPTXF0_HNPTXFSIZ; /*!< EP0 / Non Periodic Tx FIFO Size Register 028h*/ - __IO uint32_t HNPTXSTS; /*!< Non Periodic Tx FIFO/Queue Sts reg 02Ch*/ - uint32_t Reserved30[2]; /*!< Reserved 030h*/ - __IO uint32_t GCCFG; /*!< General Purpose IO Register 038h*/ - __IO uint32_t CID; /*!< User ID Register 03Ch*/ - __IO uint32_t GSNPSID; /*!< USB_OTG core ID 040h*/ - __IO uint32_t GHWCFG1; /*!< User HW config1 044h*/ - __IO uint32_t GHWCFG2; /*!< User HW config2 048h*/ - __IO uint32_t GHWCFG3; /*!< User HW config3 04Ch*/ - uint32_t Reserved6; /*!< Reserved 050h*/ - __IO uint32_t GLPMCFG; /*!< LPM Register 054h*/ - __IO uint32_t GPWRDN; /*!< Power Down Register 058h*/ - __IO uint32_t GDFIFOCFG; /*!< DFIFO Software Config Register 05Ch*/ - __IO uint32_t GADPCTL; /*!< ADP Timer, Control and Status Register 060h*/ - uint32_t Reserved43[39]; /*!< Reserved 064h-0FFh*/ - __IO uint32_t HPTXFSIZ; /*!< Host Periodic Tx FIFO Size Reg 100h*/ - __IO uint32_t DIEPTXF[0x0F]; /*!< dev Periodic Transmit FIFO */ -} USB_OTG_GlobalTypeDef; - -/** - * @brief USB_OTG_device_Registers - */ -typedef struct -{ - __IO uint32_t DCFG; /* dev Configuration Register 800h*/ - __IO uint32_t DCTL; /* dev Control Register 804h*/ - __IO uint32_t DSTS; /* dev Status Register (RO) 808h*/ - uint32_t Reserved0C; /* Reserved 80Ch*/ - __IO uint32_t DIEPMSK; /* dev IN Endpoint Mask 810h*/ - __IO uint32_t DOEPMSK; /* dev OUT Endpoint Mask 814h*/ - __IO uint32_t DAINT; /* dev All Endpoints Itr Reg 818h*/ - __IO uint32_t DAINTMSK; /* dev All Endpoints Itr Mask 81Ch*/ - uint32_t Reserved20; /* Reserved 820h*/ - uint32_t Reserved24; /* Reserved 824h*/ - __IO uint32_t DVBUSDIS; /* dev VBUS discharge Register 828h*/ - __IO uint32_t DVBUSPULSE; /* dev VBUS Pulse Register 82Ch*/ - __IO uint32_t DTHRCTL; /* dev thr 830h*/ - __IO uint32_t DIEPEMPMSK; /* dev empty msk 834h*/ - __IO uint32_t DEACHINT; /* dedicated EP interrupt 838h*/ - __IO uint32_t DEACHMSK; /* dedicated EP msk 83Ch*/ - uint32_t Reserved40; /* Reserved 840h*/ - __IO uint32_t DINEP1MSK; /* dedicated EP mask 844h*/ - uint32_t Reserved44[15]; /* Reserved 848-880h*/ - __IO uint32_t DOUTEP1MSK; /* dedicated EP msk 884h*/ -} USB_OTG_DeviceTypeDef; - -/** - * @brief USB_OTG_IN_Endpoint-Specific_Register - */ -typedef struct -{ - __IO uint32_t DIEPCTL; /* dev IN Endpoint Control Reg 900h + (ep_num * 20h) + 00h*/ - uint32_t Reserved04; /* Reserved 900h + (ep_num * 20h) + 04h*/ - __IO uint32_t DIEPINT; /* dev IN Endpoint Itr Reg 900h + (ep_num * 20h) + 08h*/ - uint32_t Reserved0C; /* Reserved 900h + (ep_num * 20h) + 0Ch*/ - __IO uint32_t DIEPTSIZ; /* IN Endpoint Txfer Size 900h + (ep_num * 20h) + 10h*/ - __IO uint32_t DIEPDMA; /* IN Endpoint DMA Address Reg 900h + (ep_num * 20h) + 14h*/ - __IO uint32_t DTXFSTS; /*IN Endpoint Tx FIFO Status Reg 900h + (ep_num * 20h) + 18h*/ - uint32_t Reserved18; /* Reserved 900h+(ep_num*20h)+1Ch-900h+ (ep_num * 20h) + 1Ch*/ -} USB_OTG_INEndpointTypeDef; - -/** - * @brief USB_OTG_OUT_Endpoint-Specific_Registers - */ -typedef struct -{ - __IO uint32_t DOEPCTL; /* dev OUT Endpoint Control Reg B00h + (ep_num * 20h) + 00h*/ - uint32_t Reserved04; /* Reserved B00h + (ep_num * 20h) + 04h*/ - __IO uint32_t DOEPINT; /* dev OUT Endpoint Itr Reg B00h + (ep_num * 20h) + 08h*/ - uint32_t Reserved0C; /* Reserved B00h + (ep_num * 20h) + 0Ch*/ - __IO uint32_t DOEPTSIZ; /* dev OUT Endpoint Txfer Size B00h + (ep_num * 20h) + 10h*/ - __IO uint32_t DOEPDMA; /* dev OUT Endpoint DMA Address B00h + (ep_num * 20h) + 14h*/ - uint32_t Reserved18[2]; /* Reserved B00h + (ep_num * 20h) + 18h - B00h + (ep_num * 20h) + 1Ch*/ -} USB_OTG_OUTEndpointTypeDef; - -/** - * @brief USB_OTG_Host_Mode_Register_Structures - */ -typedef struct -{ - __IO uint32_t HCFG; /* Host Configuration Register 400h*/ - __IO uint32_t HFIR; /* Host Frame Interval Register 404h*/ - __IO uint32_t HFNUM; /* Host Frame Nbr/Frame Remaining 408h*/ - uint32_t Reserved40C; /* Reserved 40Ch*/ - __IO uint32_t HPTXSTS; /* Host Periodic Tx FIFO/ Queue Status 410h*/ - __IO uint32_t HAINT; /* Host All Channels Interrupt Register 414h*/ - __IO uint32_t HAINTMSK; /* Host All Channels Interrupt Mask 418h*/ -} USB_OTG_HostTypeDef; - -/** - * @brief USB_OTG_Host_Channel_Specific_Registers - */ -typedef struct -{ - __IO uint32_t HCCHAR; - __IO uint32_t HCSPLT; - __IO uint32_t HCINT; - __IO uint32_t HCINTMSK; - __IO uint32_t HCTSIZ; - __IO uint32_t HCDMA; - uint32_t Reserved[2]; -} USB_OTG_HostChannelTypeDef; - -/** - * @} - */ - -/** @addtogroup Peripheral_memory_map - * @{ - */ -#define FLASH_BASE (0x08000000UL) /*!< FLASH(up to 1 MB) base address */ -#define FLASH_END (0x080FFFFFUL) /*!< FLASH END address */ -#define FLASH_BANK1_END (0x0807FFFFUL) /*!< FLASH END address of bank1 */ -#define FLASH_BANK2_END (0x080FFFFFUL) /*!< FLASH END address of bank2 */ -#define SRAM1_BASE (0x20000000UL) /*!< SRAM1(up to 256 KB) base address */ -#define SRAM2_BASE (0x10000000UL) /*!< SRAM2(64 KB) base address */ -#define PERIPH_BASE (0x40000000UL) /*!< Peripheral base address */ -#define FMC_BASE (0x60000000UL) /*!< FMC base address */ -#define QSPI_BASE (0x90000000UL) /*!< QUADSPI memories accessible over AHB base address */ - -#define FMC_R_BASE (0xA0000000UL) /*!< FMC control registers base address */ -#define QSPI_R_BASE (0xA0001000UL) /*!< QUADSPI control registers base address */ -#define SRAM1_BB_BASE (0x22000000UL) /*!< SRAM1(96 KB) base address in the bit-band region */ -#define PERIPH_BB_BASE (0x42000000UL) /*!< Peripheral base address in the bit-band region */ - -/* Legacy defines */ -#define SRAM_BASE SRAM1_BASE -#define SRAM_BB_BASE SRAM1_BB_BASE - -#define SRAM1_SIZE_MAX (0x00040000UL) /*!< maximum SRAM1 size (up to 256 KBytes) */ -#define SRAM2_SIZE (0x00010000UL) /*!< SRAM2 size (64 KBytes) */ - -#define FLASH_SIZE_DATA_REGISTER ((uint32_t)0x1FFF75E0) - -#define FLASH_SIZE (((((*((uint32_t *)FLASH_SIZE_DATA_REGISTER)) & (0x0000FFFFU))== 0x0000FFFFU)) ? (0x400U << 10U) : \ - (((*((uint32_t *)FLASH_SIZE_DATA_REGISTER)) & (0x0000FFFFU)) << 10U)) - -/*!< Peripheral memory map */ -#define APB1PERIPH_BASE PERIPH_BASE -#define APB2PERIPH_BASE (PERIPH_BASE + 0x00010000UL) -#define AHB1PERIPH_BASE (PERIPH_BASE + 0x00020000UL) -#define AHB2PERIPH_BASE (PERIPH_BASE + 0x08000000UL) - -#define FMC_BANK1 FMC_BASE -#define FMC_BANK1_1 FMC_BANK1 -#define FMC_BANK1_2 (FMC_BANK1 + 0x04000000UL) -#define FMC_BANK1_3 (FMC_BANK1 + 0x08000000UL) -#define FMC_BANK1_4 (FMC_BANK1 + 0x0C000000UL) -#define FMC_BANK3 (FMC_BASE + 0x20000000UL) - -/*!< APB1 peripherals */ -#define TIM2_BASE (APB1PERIPH_BASE + 0x0000UL) -#define TIM3_BASE (APB1PERIPH_BASE + 0x0400UL) -#define TIM4_BASE (APB1PERIPH_BASE + 0x0800UL) -#define TIM5_BASE (APB1PERIPH_BASE + 0x0C00UL) -#define TIM6_BASE (APB1PERIPH_BASE + 0x1000UL) -#define TIM7_BASE (APB1PERIPH_BASE + 0x1400UL) -#define LCD_BASE (APB1PERIPH_BASE + 0x2400UL) -#define RTC_BASE (APB1PERIPH_BASE + 0x2800UL) -#define WWDG_BASE (APB1PERIPH_BASE + 0x2C00UL) -#define IWDG_BASE (APB1PERIPH_BASE + 0x3000UL) -#define SPI2_BASE (APB1PERIPH_BASE + 0x3800UL) -#define SPI3_BASE (APB1PERIPH_BASE + 0x3C00UL) -#define USART2_BASE (APB1PERIPH_BASE + 0x4400UL) -#define USART3_BASE (APB1PERIPH_BASE + 0x4800UL) -#define UART4_BASE (APB1PERIPH_BASE + 0x4C00UL) -#define UART5_BASE (APB1PERIPH_BASE + 0x5000UL) -#define I2C1_BASE (APB1PERIPH_BASE + 0x5400UL) -#define I2C2_BASE (APB1PERIPH_BASE + 0x5800UL) -#define I2C3_BASE (APB1PERIPH_BASE + 0x5C00UL) -#define CRS_BASE (APB1PERIPH_BASE + 0x6000UL) -#define CAN1_BASE (APB1PERIPH_BASE + 0x6400UL) -#define CAN2_BASE (APB1PERIPH_BASE + 0x6800UL) -#define I2C4_BASE (APB1PERIPH_BASE + 0x8400UL) -#define PWR_BASE (APB1PERIPH_BASE + 0x7000UL) -#define DAC_BASE (APB1PERIPH_BASE + 0x7400UL) -#define DAC1_BASE (APB1PERIPH_BASE + 0x7400UL) -#define OPAMP_BASE (APB1PERIPH_BASE + 0x7800UL) -#define OPAMP1_BASE (APB1PERIPH_BASE + 0x7800UL) -#define OPAMP2_BASE (APB1PERIPH_BASE + 0x7810UL) -#define LPTIM1_BASE (APB1PERIPH_BASE + 0x7C00UL) -#define LPUART1_BASE (APB1PERIPH_BASE + 0x8000UL) -#define SWPMI1_BASE (APB1PERIPH_BASE + 0x8800UL) -#define LPTIM2_BASE (APB1PERIPH_BASE + 0x9400UL) - - -/*!< APB2 peripherals */ -#define SYSCFG_BASE (APB2PERIPH_BASE + 0x0000UL) -#define VREFBUF_BASE (APB2PERIPH_BASE + 0x0030UL) -#define COMP1_BASE (APB2PERIPH_BASE + 0x0200UL) -#define COMP2_BASE (APB2PERIPH_BASE + 0x0204UL) -#define EXTI_BASE (APB2PERIPH_BASE + 0x0400UL) -#define FIREWALL_BASE (APB2PERIPH_BASE + 0x1C00UL) -#define SDMMC1_BASE (APB2PERIPH_BASE + 0x2800UL) -#define TIM1_BASE (APB2PERIPH_BASE + 0x2C00UL) -#define SPI1_BASE (APB2PERIPH_BASE + 0x3000UL) -#define TIM8_BASE (APB2PERIPH_BASE + 0x3400UL) -#define USART1_BASE (APB2PERIPH_BASE + 0x3800UL) -#define TIM15_BASE (APB2PERIPH_BASE + 0x4000UL) -#define TIM16_BASE (APB2PERIPH_BASE + 0x4400UL) -#define TIM17_BASE (APB2PERIPH_BASE + 0x4800UL) -#define SAI1_BASE (APB2PERIPH_BASE + 0x5400UL) -#define SAI1_Block_A_BASE (SAI1_BASE + 0x0004UL) -#define SAI1_Block_B_BASE (SAI1_BASE + 0x0024UL) -#define SAI2_BASE (APB2PERIPH_BASE + 0x5800UL) -#define SAI2_Block_A_BASE (SAI2_BASE + 0x0004UL) -#define SAI2_Block_B_BASE (SAI2_BASE + 0x0024UL) -#define DFSDM1_BASE (APB2PERIPH_BASE + 0x6000UL) -#define DFSDM1_Channel0_BASE (DFSDM1_BASE + 0x0000UL) -#define DFSDM1_Channel1_BASE (DFSDM1_BASE + 0x0020UL) -#define DFSDM1_Channel2_BASE (DFSDM1_BASE + 0x0040UL) -#define DFSDM1_Channel3_BASE (DFSDM1_BASE + 0x0060UL) -#define DFSDM1_Channel4_BASE (DFSDM1_BASE + 0x0080UL) -#define DFSDM1_Channel5_BASE (DFSDM1_BASE + 0x00A0UL) -#define DFSDM1_Channel6_BASE (DFSDM1_BASE + 0x00C0UL) -#define DFSDM1_Channel7_BASE (DFSDM1_BASE + 0x00E0UL) -#define DFSDM1_Filter0_BASE (DFSDM1_BASE + 0x0100UL) -#define DFSDM1_Filter1_BASE (DFSDM1_BASE + 0x0180UL) -#define DFSDM1_Filter2_BASE (DFSDM1_BASE + 0x0200UL) -#define DFSDM1_Filter3_BASE (DFSDM1_BASE + 0x0280UL) - -/*!< AHB1 peripherals */ -#define DMA1_BASE (AHB1PERIPH_BASE) -#define DMA2_BASE (AHB1PERIPH_BASE + 0x0400UL) -#define RCC_BASE (AHB1PERIPH_BASE + 0x1000UL) -#define FLASH_R_BASE (AHB1PERIPH_BASE + 0x2000UL) -#define CRC_BASE (AHB1PERIPH_BASE + 0x3000UL) -#define TSC_BASE (AHB1PERIPH_BASE + 0x4000UL) -#define DMA2D_BASE (AHB1PERIPH_BASE + 0xB000UL) - - -#define DMA1_Channel1_BASE (DMA1_BASE + 0x0008UL) -#define DMA1_Channel2_BASE (DMA1_BASE + 0x001CUL) -#define DMA1_Channel3_BASE (DMA1_BASE + 0x0030UL) -#define DMA1_Channel4_BASE (DMA1_BASE + 0x0044UL) -#define DMA1_Channel5_BASE (DMA1_BASE + 0x0058UL) -#define DMA1_Channel6_BASE (DMA1_BASE + 0x006CUL) -#define DMA1_Channel7_BASE (DMA1_BASE + 0x0080UL) -#define DMA1_CSELR_BASE (DMA1_BASE + 0x00A8UL) - - -#define DMA2_Channel1_BASE (DMA2_BASE + 0x0008UL) -#define DMA2_Channel2_BASE (DMA2_BASE + 0x001CUL) -#define DMA2_Channel3_BASE (DMA2_BASE + 0x0030UL) -#define DMA2_Channel4_BASE (DMA2_BASE + 0x0044UL) -#define DMA2_Channel5_BASE (DMA2_BASE + 0x0058UL) -#define DMA2_Channel6_BASE (DMA2_BASE + 0x006CUL) -#define DMA2_Channel7_BASE (DMA2_BASE + 0x0080UL) -#define DMA2_CSELR_BASE (DMA2_BASE + 0x00A8UL) - - -/*!< AHB2 peripherals */ -#define GPIOA_BASE (AHB2PERIPH_BASE + 0x0000UL) -#define GPIOB_BASE (AHB2PERIPH_BASE + 0x0400UL) -#define GPIOC_BASE (AHB2PERIPH_BASE + 0x0800UL) -#define GPIOD_BASE (AHB2PERIPH_BASE + 0x0C00UL) -#define GPIOE_BASE (AHB2PERIPH_BASE + 0x1000UL) -#define GPIOF_BASE (AHB2PERIPH_BASE + 0x1400UL) -#define GPIOG_BASE (AHB2PERIPH_BASE + 0x1800UL) -#define GPIOH_BASE (AHB2PERIPH_BASE + 0x1C00UL) -#define GPIOI_BASE (AHB2PERIPH_BASE + 0x2000UL) - -#define USBOTG_BASE (AHB2PERIPH_BASE + 0x08000000UL) - -#define ADC1_BASE (AHB2PERIPH_BASE + 0x08040000UL) -#define ADC2_BASE (AHB2PERIPH_BASE + 0x08040100UL) -#define ADC3_BASE (AHB2PERIPH_BASE + 0x08040200UL) -#define ADC123_COMMON_BASE (AHB2PERIPH_BASE + 0x08040300UL) - -#define DCMI_BASE (AHB2PERIPH_BASE + 0x08050000UL) - -#define RNG_BASE (AHB2PERIPH_BASE + 0x08060800UL) - - -/*!< FMC Banks registers base address */ -#define FMC_Bank1_R_BASE (FMC_R_BASE + 0x0000UL) -#define FMC_Bank1E_R_BASE (FMC_R_BASE + 0x0104UL) -#define FMC_Bank3_R_BASE (FMC_R_BASE + 0x0080UL) - -/* Debug MCU registers base address */ -#define DBGMCU_BASE (0xE0042000UL) - -/*!< USB registers base address */ -#define USB_OTG_FS_PERIPH_BASE (0x50000000UL) - -#define USB_OTG_GLOBAL_BASE (0x00000000UL) -#define USB_OTG_DEVICE_BASE (0x00000800UL) -#define USB_OTG_IN_ENDPOINT_BASE (0x00000900UL) -#define USB_OTG_OUT_ENDPOINT_BASE (0x00000B00UL) -#define USB_OTG_EP_REG_SIZE (0x00000020UL) -#define USB_OTG_HOST_BASE (0x00000400UL) -#define USB_OTG_HOST_PORT_BASE (0x00000440UL) -#define USB_OTG_HOST_CHANNEL_BASE (0x00000500UL) -#define USB_OTG_HOST_CHANNEL_SIZE (0x00000020UL) -#define USB_OTG_PCGCCTL_BASE (0x00000E00UL) -#define USB_OTG_FIFO_BASE (0x00001000UL) -#define USB_OTG_FIFO_SIZE (0x00001000UL) - - -#define PACKAGE_BASE (0x1FFF7500UL) /*!< Package data register base address */ -#define UID_BASE (0x1FFF7590UL) /*!< Unique device ID register base address */ -#define FLASHSIZE_BASE (0x1FFF75E0UL) /*!< Flash size data register base address */ -/** - * @} - */ - -/** @addtogroup Peripheral_declaration - * @{ - */ -#define TIM2 ((TIM_TypeDef *) TIM2_BASE) -#define TIM3 ((TIM_TypeDef *) TIM3_BASE) -#define TIM4 ((TIM_TypeDef *) TIM4_BASE) -#define TIM5 ((TIM_TypeDef *) TIM5_BASE) -#define TIM6 ((TIM_TypeDef *) TIM6_BASE) -#define TIM7 ((TIM_TypeDef *) TIM7_BASE) -#define LCD ((LCD_TypeDef *) LCD_BASE) -#define RTC ((RTC_TypeDef *) RTC_BASE) -#define WWDG ((WWDG_TypeDef *) WWDG_BASE) -#define IWDG ((IWDG_TypeDef *) IWDG_BASE) -#define SPI2 ((SPI_TypeDef *) SPI2_BASE) -#define SPI3 ((SPI_TypeDef *) SPI3_BASE) -#define USART2 ((USART_TypeDef *) USART2_BASE) -#define USART3 ((USART_TypeDef *) USART3_BASE) -#define UART4 ((USART_TypeDef *) UART4_BASE) -#define UART5 ((USART_TypeDef *) UART5_BASE) -#define I2C1 ((I2C_TypeDef *) I2C1_BASE) -#define I2C2 ((I2C_TypeDef *) I2C2_BASE) -#define I2C3 ((I2C_TypeDef *) I2C3_BASE) -#define CRS ((CRS_TypeDef *) CRS_BASE) -#define CAN ((CAN_TypeDef *) CAN1_BASE) -#define CAN1 ((CAN_TypeDef *) CAN1_BASE) -#define CAN2 ((CAN_TypeDef *) CAN2_BASE) -#define I2C4 ((I2C_TypeDef *) I2C4_BASE) -#define PWR ((PWR_TypeDef *) PWR_BASE) -#define DAC ((DAC_TypeDef *) DAC1_BASE) -#define DAC1 ((DAC_TypeDef *) DAC1_BASE) -#define OPAMP ((OPAMP_TypeDef *) OPAMP_BASE) -#define OPAMP1 ((OPAMP_TypeDef *) OPAMP1_BASE) -#define OPAMP2 ((OPAMP_TypeDef *) OPAMP2_BASE) -#define OPAMP12_COMMON ((OPAMP_Common_TypeDef *) OPAMP1_BASE) -#define LPTIM1 ((LPTIM_TypeDef *) LPTIM1_BASE) -#define LPUART1 ((USART_TypeDef *) LPUART1_BASE) -#define SWPMI1 ((SWPMI_TypeDef *) SWPMI1_BASE) -#define LPTIM2 ((LPTIM_TypeDef *) LPTIM2_BASE) - -#define SYSCFG ((SYSCFG_TypeDef *) SYSCFG_BASE) -#define VREFBUF ((VREFBUF_TypeDef *) VREFBUF_BASE) -#define COMP1 ((COMP_TypeDef *) COMP1_BASE) -#define COMP2 ((COMP_TypeDef *) COMP2_BASE) -#define COMP12_COMMON ((COMP_Common_TypeDef *) COMP2_BASE) -#define EXTI ((EXTI_TypeDef *) EXTI_BASE) -#define FIREWALL ((FIREWALL_TypeDef *) FIREWALL_BASE) -#define SDMMC1 ((SDMMC_TypeDef *) SDMMC1_BASE) -#define TIM1 ((TIM_TypeDef *) TIM1_BASE) -#define SPI1 ((SPI_TypeDef *) SPI1_BASE) -#define TIM8 ((TIM_TypeDef *) TIM8_BASE) -#define USART1 ((USART_TypeDef *) USART1_BASE) -#define TIM15 ((TIM_TypeDef *) TIM15_BASE) -#define TIM16 ((TIM_TypeDef *) TIM16_BASE) -#define TIM17 ((TIM_TypeDef *) TIM17_BASE) -#define SAI1 ((SAI_TypeDef *) SAI1_BASE) -#define SAI1_Block_A ((SAI_Block_TypeDef *)SAI1_Block_A_BASE) -#define SAI1_Block_B ((SAI_Block_TypeDef *)SAI1_Block_B_BASE) -#define SAI2 ((SAI_TypeDef *) SAI2_BASE) -#define SAI2_Block_A ((SAI_Block_TypeDef *)SAI2_Block_A_BASE) -#define SAI2_Block_B ((SAI_Block_TypeDef *)SAI2_Block_B_BASE) -#define DFSDM1_Channel0 ((DFSDM_Channel_TypeDef *) DFSDM1_Channel0_BASE) -#define DFSDM1_Channel1 ((DFSDM_Channel_TypeDef *) DFSDM1_Channel1_BASE) -#define DFSDM1_Channel2 ((DFSDM_Channel_TypeDef *) DFSDM1_Channel2_BASE) -#define DFSDM1_Channel3 ((DFSDM_Channel_TypeDef *) DFSDM1_Channel3_BASE) -#define DFSDM1_Channel4 ((DFSDM_Channel_TypeDef *) DFSDM1_Channel4_BASE) -#define DFSDM1_Channel5 ((DFSDM_Channel_TypeDef *) DFSDM1_Channel5_BASE) -#define DFSDM1_Channel6 ((DFSDM_Channel_TypeDef *) DFSDM1_Channel6_BASE) -#define DFSDM1_Channel7 ((DFSDM_Channel_TypeDef *) DFSDM1_Channel7_BASE) -#define DFSDM1_Filter0 ((DFSDM_Filter_TypeDef *) DFSDM1_Filter0_BASE) -#define DFSDM1_Filter1 ((DFSDM_Filter_TypeDef *) DFSDM1_Filter1_BASE) -#define DFSDM1_Filter2 ((DFSDM_Filter_TypeDef *) DFSDM1_Filter2_BASE) -#define DFSDM1_Filter3 ((DFSDM_Filter_TypeDef *) DFSDM1_Filter3_BASE) -/* Aliases to keep compatibility after DFSDM renaming */ -#define DFSDM_Channel0 DFSDM1_Channel0 -#define DFSDM_Channel1 DFSDM1_Channel1 -#define DFSDM_Channel2 DFSDM1_Channel2 -#define DFSDM_Channel3 DFSDM1_Channel3 -#define DFSDM_Channel4 DFSDM1_Channel4 -#define DFSDM_Channel5 DFSDM1_Channel5 -#define DFSDM_Channel6 DFSDM1_Channel6 -#define DFSDM_Channel7 DFSDM1_Channel7 -#define DFSDM_Filter0 DFSDM1_Filter0 -#define DFSDM_Filter1 DFSDM1_Filter1 -#define DFSDM_Filter2 DFSDM1_Filter2 -#define DFSDM_Filter3 DFSDM1_Filter3 -#define DMA1 ((DMA_TypeDef *) DMA1_BASE) -#define DMA2 ((DMA_TypeDef *) DMA2_BASE) -#define RCC ((RCC_TypeDef *) RCC_BASE) -#define FLASH ((FLASH_TypeDef *) FLASH_R_BASE) -#define CRC ((CRC_TypeDef *) CRC_BASE) -#define TSC ((TSC_TypeDef *) TSC_BASE) - -#define GPIOA ((GPIO_TypeDef *) GPIOA_BASE) -#define GPIOB ((GPIO_TypeDef *) GPIOB_BASE) -#define GPIOC ((GPIO_TypeDef *) GPIOC_BASE) -#define GPIOD ((GPIO_TypeDef *) GPIOD_BASE) -#define GPIOE ((GPIO_TypeDef *) GPIOE_BASE) -#define GPIOF ((GPIO_TypeDef *) GPIOF_BASE) -#define GPIOG ((GPIO_TypeDef *) GPIOG_BASE) -#define GPIOH ((GPIO_TypeDef *) GPIOH_BASE) -#define GPIOI ((GPIO_TypeDef *) GPIOI_BASE) -#define ADC1 ((ADC_TypeDef *) ADC1_BASE) -#define ADC2 ((ADC_TypeDef *) ADC2_BASE) -#define ADC3 ((ADC_TypeDef *) ADC3_BASE) -#define ADC123_COMMON ((ADC_Common_TypeDef *) ADC123_COMMON_BASE) -#define DCMI ((DCMI_TypeDef *) DCMI_BASE) -#define DMA2D ((DMA2D_TypeDef *)DMA2D_BASE) -#define RNG ((RNG_TypeDef *) RNG_BASE) - - -#define DMA1_Channel1 ((DMA_Channel_TypeDef *) DMA1_Channel1_BASE) -#define DMA1_Channel2 ((DMA_Channel_TypeDef *) DMA1_Channel2_BASE) -#define DMA1_Channel3 ((DMA_Channel_TypeDef *) DMA1_Channel3_BASE) -#define DMA1_Channel4 ((DMA_Channel_TypeDef *) DMA1_Channel4_BASE) -#define DMA1_Channel5 ((DMA_Channel_TypeDef *) DMA1_Channel5_BASE) -#define DMA1_Channel6 ((DMA_Channel_TypeDef *) DMA1_Channel6_BASE) -#define DMA1_Channel7 ((DMA_Channel_TypeDef *) DMA1_Channel7_BASE) -#define DMA1_CSELR ((DMA_Request_TypeDef *) DMA1_CSELR_BASE) - - -#define DMA2_Channel1 ((DMA_Channel_TypeDef *) DMA2_Channel1_BASE) -#define DMA2_Channel2 ((DMA_Channel_TypeDef *) DMA2_Channel2_BASE) -#define DMA2_Channel3 ((DMA_Channel_TypeDef *) DMA2_Channel3_BASE) -#define DMA2_Channel4 ((DMA_Channel_TypeDef *) DMA2_Channel4_BASE) -#define DMA2_Channel5 ((DMA_Channel_TypeDef *) DMA2_Channel5_BASE) -#define DMA2_Channel6 ((DMA_Channel_TypeDef *) DMA2_Channel6_BASE) -#define DMA2_Channel7 ((DMA_Channel_TypeDef *) DMA2_Channel7_BASE) -#define DMA2_CSELR ((DMA_Request_TypeDef *) DMA2_CSELR_BASE) - - -#define FMC_Bank1_R ((FMC_Bank1_TypeDef *) FMC_Bank1_R_BASE) -#define FMC_Bank1E_R ((FMC_Bank1E_TypeDef *) FMC_Bank1E_R_BASE) -#define FMC_Bank3_R ((FMC_Bank3_TypeDef *) FMC_Bank3_R_BASE) - -#define QUADSPI ((QUADSPI_TypeDef *) QSPI_R_BASE) - -#define DBGMCU ((DBGMCU_TypeDef *) DBGMCU_BASE) - -#define USB_OTG_FS ((USB_OTG_GlobalTypeDef *) USB_OTG_FS_PERIPH_BASE) -/** - * @} - */ - -/** @addtogroup Exported_constants - * @{ - */ - -/** @addtogroup Hardware_Constant_Definition - * @{ - */ -#define LSI_STARTUP_TIME 130U /*!< LSI Maximum startup time in us */ - -/** - * @} - */ - -/** @addtogroup Peripheral_Registers_Bits_Definition - * @{ - */ - -/******************************************************************************/ -/* Peripheral Registers_Bits_Definition */ -/******************************************************************************/ - -/******************************************************************************/ -/* */ -/* Analog to Digital Converter */ -/* */ -/******************************************************************************/ - -/* - * @brief Specific device feature definitions (not present on all devices in the STM32L4 serie) - */ -#define ADC_MULTIMODE_SUPPORT /*!< ADC feature available only on specific devices: multimode available on devices with several ADC instances */ - -/******************** Bit definition for ADC_ISR register *******************/ -#define ADC_ISR_ADRDY_Pos (0U) -#define ADC_ISR_ADRDY_Msk (0x1UL << ADC_ISR_ADRDY_Pos) /*!< 0x00000001 */ -#define ADC_ISR_ADRDY ADC_ISR_ADRDY_Msk /*!< ADC ready flag */ -#define ADC_ISR_EOSMP_Pos (1U) -#define ADC_ISR_EOSMP_Msk (0x1UL << ADC_ISR_EOSMP_Pos) /*!< 0x00000002 */ -#define ADC_ISR_EOSMP ADC_ISR_EOSMP_Msk /*!< ADC group regular end of sampling flag */ -#define ADC_ISR_EOC_Pos (2U) -#define ADC_ISR_EOC_Msk (0x1UL << ADC_ISR_EOC_Pos) /*!< 0x00000004 */ -#define ADC_ISR_EOC ADC_ISR_EOC_Msk /*!< ADC group regular end of unitary conversion flag */ -#define ADC_ISR_EOS_Pos (3U) -#define ADC_ISR_EOS_Msk (0x1UL << ADC_ISR_EOS_Pos) /*!< 0x00000008 */ -#define ADC_ISR_EOS ADC_ISR_EOS_Msk /*!< ADC group regular end of sequence conversions flag */ -#define ADC_ISR_OVR_Pos (4U) -#define ADC_ISR_OVR_Msk (0x1UL << ADC_ISR_OVR_Pos) /*!< 0x00000010 */ -#define ADC_ISR_OVR ADC_ISR_OVR_Msk /*!< ADC group regular overrun flag */ -#define ADC_ISR_JEOC_Pos (5U) -#define ADC_ISR_JEOC_Msk (0x1UL << ADC_ISR_JEOC_Pos) /*!< 0x00000020 */ -#define ADC_ISR_JEOC ADC_ISR_JEOC_Msk /*!< ADC group injected end of unitary conversion flag */ -#define ADC_ISR_JEOS_Pos (6U) -#define ADC_ISR_JEOS_Msk (0x1UL << ADC_ISR_JEOS_Pos) /*!< 0x00000040 */ -#define ADC_ISR_JEOS ADC_ISR_JEOS_Msk /*!< ADC group injected end of sequence conversions flag */ -#define ADC_ISR_AWD1_Pos (7U) -#define ADC_ISR_AWD1_Msk (0x1UL << ADC_ISR_AWD1_Pos) /*!< 0x00000080 */ -#define ADC_ISR_AWD1 ADC_ISR_AWD1_Msk /*!< ADC analog watchdog 1 flag */ -#define ADC_ISR_AWD2_Pos (8U) -#define ADC_ISR_AWD2_Msk (0x1UL << ADC_ISR_AWD2_Pos) /*!< 0x00000100 */ -#define ADC_ISR_AWD2 ADC_ISR_AWD2_Msk /*!< ADC analog watchdog 2 flag */ -#define ADC_ISR_AWD3_Pos (9U) -#define ADC_ISR_AWD3_Msk (0x1UL << ADC_ISR_AWD3_Pos) /*!< 0x00000200 */ -#define ADC_ISR_AWD3 ADC_ISR_AWD3_Msk /*!< ADC analog watchdog 3 flag */ -#define ADC_ISR_JQOVF_Pos (10U) -#define ADC_ISR_JQOVF_Msk (0x1UL << ADC_ISR_JQOVF_Pos) /*!< 0x00000400 */ -#define ADC_ISR_JQOVF ADC_ISR_JQOVF_Msk /*!< ADC group injected contexts queue overflow flag */ - -/******************** Bit definition for ADC_IER register *******************/ -#define ADC_IER_ADRDYIE_Pos (0U) -#define ADC_IER_ADRDYIE_Msk (0x1UL << ADC_IER_ADRDYIE_Pos) /*!< 0x00000001 */ -#define ADC_IER_ADRDYIE ADC_IER_ADRDYIE_Msk /*!< ADC ready interrupt */ -#define ADC_IER_EOSMPIE_Pos (1U) -#define ADC_IER_EOSMPIE_Msk (0x1UL << ADC_IER_EOSMPIE_Pos) /*!< 0x00000002 */ -#define ADC_IER_EOSMPIE ADC_IER_EOSMPIE_Msk /*!< ADC group regular end of sampling interrupt */ -#define ADC_IER_EOCIE_Pos (2U) -#define ADC_IER_EOCIE_Msk (0x1UL << ADC_IER_EOCIE_Pos) /*!< 0x00000004 */ -#define ADC_IER_EOCIE ADC_IER_EOCIE_Msk /*!< ADC group regular end of unitary conversion interrupt */ -#define ADC_IER_EOSIE_Pos (3U) -#define ADC_IER_EOSIE_Msk (0x1UL << ADC_IER_EOSIE_Pos) /*!< 0x00000008 */ -#define ADC_IER_EOSIE ADC_IER_EOSIE_Msk /*!< ADC group regular end of sequence conversions interrupt */ -#define ADC_IER_OVRIE_Pos (4U) -#define ADC_IER_OVRIE_Msk (0x1UL << ADC_IER_OVRIE_Pos) /*!< 0x00000010 */ -#define ADC_IER_OVRIE ADC_IER_OVRIE_Msk /*!< ADC group regular overrun interrupt */ -#define ADC_IER_JEOCIE_Pos (5U) -#define ADC_IER_JEOCIE_Msk (0x1UL << ADC_IER_JEOCIE_Pos) /*!< 0x00000020 */ -#define ADC_IER_JEOCIE ADC_IER_JEOCIE_Msk /*!< ADC group injected end of unitary conversion interrupt */ -#define ADC_IER_JEOSIE_Pos (6U) -#define ADC_IER_JEOSIE_Msk (0x1UL << ADC_IER_JEOSIE_Pos) /*!< 0x00000040 */ -#define ADC_IER_JEOSIE ADC_IER_JEOSIE_Msk /*!< ADC group injected end of sequence conversions interrupt */ -#define ADC_IER_AWD1IE_Pos (7U) -#define ADC_IER_AWD1IE_Msk (0x1UL << ADC_IER_AWD1IE_Pos) /*!< 0x00000080 */ -#define ADC_IER_AWD1IE ADC_IER_AWD1IE_Msk /*!< ADC analog watchdog 1 interrupt */ -#define ADC_IER_AWD2IE_Pos (8U) -#define ADC_IER_AWD2IE_Msk (0x1UL << ADC_IER_AWD2IE_Pos) /*!< 0x00000100 */ -#define ADC_IER_AWD2IE ADC_IER_AWD2IE_Msk /*!< ADC analog watchdog 2 interrupt */ -#define ADC_IER_AWD3IE_Pos (9U) -#define ADC_IER_AWD3IE_Msk (0x1UL << ADC_IER_AWD3IE_Pos) /*!< 0x00000200 */ -#define ADC_IER_AWD3IE ADC_IER_AWD3IE_Msk /*!< ADC analog watchdog 3 interrupt */ -#define ADC_IER_JQOVFIE_Pos (10U) -#define ADC_IER_JQOVFIE_Msk (0x1UL << ADC_IER_JQOVFIE_Pos) /*!< 0x00000400 */ -#define ADC_IER_JQOVFIE ADC_IER_JQOVFIE_Msk /*!< ADC group injected contexts queue overflow interrupt */ - -/* Legacy defines */ -#define ADC_IER_ADRDY (ADC_IER_ADRDYIE) -#define ADC_IER_EOSMP (ADC_IER_EOSMPIE) -#define ADC_IER_EOC (ADC_IER_EOCIE) -#define ADC_IER_EOS (ADC_IER_EOSIE) -#define ADC_IER_OVR (ADC_IER_OVRIE) -#define ADC_IER_JEOC (ADC_IER_JEOCIE) -#define ADC_IER_JEOS (ADC_IER_JEOSIE) -#define ADC_IER_AWD1 (ADC_IER_AWD1IE) -#define ADC_IER_AWD2 (ADC_IER_AWD2IE) -#define ADC_IER_AWD3 (ADC_IER_AWD3IE) -#define ADC_IER_JQOVF (ADC_IER_JQOVFIE) - -/******************** Bit definition for ADC_CR register ********************/ -#define ADC_CR_ADEN_Pos (0U) -#define ADC_CR_ADEN_Msk (0x1UL << ADC_CR_ADEN_Pos) /*!< 0x00000001 */ -#define ADC_CR_ADEN ADC_CR_ADEN_Msk /*!< ADC enable */ -#define ADC_CR_ADDIS_Pos (1U) -#define ADC_CR_ADDIS_Msk (0x1UL << ADC_CR_ADDIS_Pos) /*!< 0x00000002 */ -#define ADC_CR_ADDIS ADC_CR_ADDIS_Msk /*!< ADC disable */ -#define ADC_CR_ADSTART_Pos (2U) -#define ADC_CR_ADSTART_Msk (0x1UL << ADC_CR_ADSTART_Pos) /*!< 0x00000004 */ -#define ADC_CR_ADSTART ADC_CR_ADSTART_Msk /*!< ADC group regular conversion start */ -#define ADC_CR_JADSTART_Pos (3U) -#define ADC_CR_JADSTART_Msk (0x1UL << ADC_CR_JADSTART_Pos) /*!< 0x00000008 */ -#define ADC_CR_JADSTART ADC_CR_JADSTART_Msk /*!< ADC group injected conversion start */ -#define ADC_CR_ADSTP_Pos (4U) -#define ADC_CR_ADSTP_Msk (0x1UL << ADC_CR_ADSTP_Pos) /*!< 0x00000010 */ -#define ADC_CR_ADSTP ADC_CR_ADSTP_Msk /*!< ADC group regular conversion stop */ -#define ADC_CR_JADSTP_Pos (5U) -#define ADC_CR_JADSTP_Msk (0x1UL << ADC_CR_JADSTP_Pos) /*!< 0x00000020 */ -#define ADC_CR_JADSTP ADC_CR_JADSTP_Msk /*!< ADC group injected conversion stop */ -#define ADC_CR_ADVREGEN_Pos (28U) -#define ADC_CR_ADVREGEN_Msk (0x1UL << ADC_CR_ADVREGEN_Pos) /*!< 0x10000000 */ -#define ADC_CR_ADVREGEN ADC_CR_ADVREGEN_Msk /*!< ADC voltage regulator enable */ -#define ADC_CR_DEEPPWD_Pos (29U) -#define ADC_CR_DEEPPWD_Msk (0x1UL << ADC_CR_DEEPPWD_Pos) /*!< 0x20000000 */ -#define ADC_CR_DEEPPWD ADC_CR_DEEPPWD_Msk /*!< ADC deep power down enable */ -#define ADC_CR_ADCALDIF_Pos (30U) -#define ADC_CR_ADCALDIF_Msk (0x1UL << ADC_CR_ADCALDIF_Pos) /*!< 0x40000000 */ -#define ADC_CR_ADCALDIF ADC_CR_ADCALDIF_Msk /*!< ADC differential mode for calibration */ -#define ADC_CR_ADCAL_Pos (31U) -#define ADC_CR_ADCAL_Msk (0x1UL << ADC_CR_ADCAL_Pos) /*!< 0x80000000 */ -#define ADC_CR_ADCAL ADC_CR_ADCAL_Msk /*!< ADC calibration */ - -/******************** Bit definition for ADC_CFGR register ******************/ -#define ADC_CFGR_DMAEN_Pos (0U) -#define ADC_CFGR_DMAEN_Msk (0x1UL << ADC_CFGR_DMAEN_Pos) /*!< 0x00000001 */ -#define ADC_CFGR_DMAEN ADC_CFGR_DMAEN_Msk /*!< ADC DMA transfer enable */ -#define ADC_CFGR_DMACFG_Pos (1U) -#define ADC_CFGR_DMACFG_Msk (0x1UL << ADC_CFGR_DMACFG_Pos) /*!< 0x00000002 */ -#define ADC_CFGR_DMACFG ADC_CFGR_DMACFG_Msk /*!< ADC DMA transfer configuration */ - -#define ADC_CFGR_DFSDMCFG_Pos (2U) -#define ADC_CFGR_DFSDMCFG_Msk (0x1UL << ADC_CFGR_DFSDMCFG_Pos) /*!< 0x00000004 */ -#define ADC_CFGR_DFSDMCFG ADC_CFGR_DFSDMCFG_Msk /*!< ADC DFSDM mode configuration */ - -#define ADC_CFGR_RES_Pos (3U) -#define ADC_CFGR_RES_Msk (0x3UL << ADC_CFGR_RES_Pos) /*!< 0x00000018 */ -#define ADC_CFGR_RES ADC_CFGR_RES_Msk /*!< ADC data resolution */ -#define ADC_CFGR_RES_0 (0x1UL << ADC_CFGR_RES_Pos) /*!< 0x00000008 */ -#define ADC_CFGR_RES_1 (0x2UL << ADC_CFGR_RES_Pos) /*!< 0x00000010 */ - -#define ADC_CFGR_ALIGN_Pos (5U) -#define ADC_CFGR_ALIGN_Msk (0x1UL << ADC_CFGR_ALIGN_Pos) /*!< 0x00000020 */ -#define ADC_CFGR_ALIGN ADC_CFGR_ALIGN_Msk /*!< ADC data alignment */ - -#define ADC_CFGR_EXTSEL_Pos (6U) -#define ADC_CFGR_EXTSEL_Msk (0xFUL << ADC_CFGR_EXTSEL_Pos) /*!< 0x000003C0 */ -#define ADC_CFGR_EXTSEL ADC_CFGR_EXTSEL_Msk /*!< ADC group regular external trigger source */ -#define ADC_CFGR_EXTSEL_0 (0x1UL << ADC_CFGR_EXTSEL_Pos) /*!< 0x00000040 */ -#define ADC_CFGR_EXTSEL_1 (0x2UL << ADC_CFGR_EXTSEL_Pos) /*!< 0x00000080 */ -#define ADC_CFGR_EXTSEL_2 (0x4UL << ADC_CFGR_EXTSEL_Pos) /*!< 0x00000100 */ -#define ADC_CFGR_EXTSEL_3 (0x8UL << ADC_CFGR_EXTSEL_Pos) /*!< 0x00000200 */ - -#define ADC_CFGR_EXTEN_Pos (10U) -#define ADC_CFGR_EXTEN_Msk (0x3UL << ADC_CFGR_EXTEN_Pos) /*!< 0x00000C00 */ -#define ADC_CFGR_EXTEN ADC_CFGR_EXTEN_Msk /*!< ADC group regular external trigger polarity */ -#define ADC_CFGR_EXTEN_0 (0x1UL << ADC_CFGR_EXTEN_Pos) /*!< 0x00000400 */ -#define ADC_CFGR_EXTEN_1 (0x2UL << ADC_CFGR_EXTEN_Pos) /*!< 0x00000800 */ - -#define ADC_CFGR_OVRMOD_Pos (12U) -#define ADC_CFGR_OVRMOD_Msk (0x1UL << ADC_CFGR_OVRMOD_Pos) /*!< 0x00001000 */ -#define ADC_CFGR_OVRMOD ADC_CFGR_OVRMOD_Msk /*!< ADC group regular overrun configuration */ -#define ADC_CFGR_CONT_Pos (13U) -#define ADC_CFGR_CONT_Msk (0x1UL << ADC_CFGR_CONT_Pos) /*!< 0x00002000 */ -#define ADC_CFGR_CONT ADC_CFGR_CONT_Msk /*!< ADC group regular continuous conversion mode */ -#define ADC_CFGR_AUTDLY_Pos (14U) -#define ADC_CFGR_AUTDLY_Msk (0x1UL << ADC_CFGR_AUTDLY_Pos) /*!< 0x00004000 */ -#define ADC_CFGR_AUTDLY ADC_CFGR_AUTDLY_Msk /*!< ADC low power auto wait */ - -#define ADC_CFGR_DISCEN_Pos (16U) -#define ADC_CFGR_DISCEN_Msk (0x1UL << ADC_CFGR_DISCEN_Pos) /*!< 0x00010000 */ -#define ADC_CFGR_DISCEN ADC_CFGR_DISCEN_Msk /*!< ADC group regular sequencer discontinuous mode */ - -#define ADC_CFGR_DISCNUM_Pos (17U) -#define ADC_CFGR_DISCNUM_Msk (0x7UL << ADC_CFGR_DISCNUM_Pos) /*!< 0x000E0000 */ -#define ADC_CFGR_DISCNUM ADC_CFGR_DISCNUM_Msk /*!< ADC group regular sequencer discontinuous number of ranks */ -#define ADC_CFGR_DISCNUM_0 (0x1UL << ADC_CFGR_DISCNUM_Pos) /*!< 0x00020000 */ -#define ADC_CFGR_DISCNUM_1 (0x2UL << ADC_CFGR_DISCNUM_Pos) /*!< 0x00040000 */ -#define ADC_CFGR_DISCNUM_2 (0x4UL << ADC_CFGR_DISCNUM_Pos) /*!< 0x00080000 */ - -#define ADC_CFGR_JDISCEN_Pos (20U) -#define ADC_CFGR_JDISCEN_Msk (0x1UL << ADC_CFGR_JDISCEN_Pos) /*!< 0x00100000 */ -#define ADC_CFGR_JDISCEN ADC_CFGR_JDISCEN_Msk /*!< ADC group injected sequencer discontinuous mode */ -#define ADC_CFGR_JQM_Pos (21U) -#define ADC_CFGR_JQM_Msk (0x1UL << ADC_CFGR_JQM_Pos) /*!< 0x00200000 */ -#define ADC_CFGR_JQM ADC_CFGR_JQM_Msk /*!< ADC group injected contexts queue mode */ -#define ADC_CFGR_AWD1SGL_Pos (22U) -#define ADC_CFGR_AWD1SGL_Msk (0x1UL << ADC_CFGR_AWD1SGL_Pos) /*!< 0x00400000 */ -#define ADC_CFGR_AWD1SGL ADC_CFGR_AWD1SGL_Msk /*!< ADC analog watchdog 1 monitoring a single channel or all channels */ -#define ADC_CFGR_AWD1EN_Pos (23U) -#define ADC_CFGR_AWD1EN_Msk (0x1UL << ADC_CFGR_AWD1EN_Pos) /*!< 0x00800000 */ -#define ADC_CFGR_AWD1EN ADC_CFGR_AWD1EN_Msk /*!< ADC analog watchdog 1 enable on scope ADC group regular */ -#define ADC_CFGR_JAWD1EN_Pos (24U) -#define ADC_CFGR_JAWD1EN_Msk (0x1UL << ADC_CFGR_JAWD1EN_Pos) /*!< 0x01000000 */ -#define ADC_CFGR_JAWD1EN ADC_CFGR_JAWD1EN_Msk /*!< ADC analog watchdog 1 enable on scope ADC group injected */ -#define ADC_CFGR_JAUTO_Pos (25U) -#define ADC_CFGR_JAUTO_Msk (0x1UL << ADC_CFGR_JAUTO_Pos) /*!< 0x02000000 */ -#define ADC_CFGR_JAUTO ADC_CFGR_JAUTO_Msk /*!< ADC group injected automatic trigger mode */ - -#define ADC_CFGR_AWD1CH_Pos (26U) -#define ADC_CFGR_AWD1CH_Msk (0x1FUL << ADC_CFGR_AWD1CH_Pos) /*!< 0x7C000000 */ -#define ADC_CFGR_AWD1CH ADC_CFGR_AWD1CH_Msk /*!< ADC analog watchdog 1 monitored channel selection */ -#define ADC_CFGR_AWD1CH_0 (0x01UL << ADC_CFGR_AWD1CH_Pos) /*!< 0x04000000 */ -#define ADC_CFGR_AWD1CH_1 (0x02UL << ADC_CFGR_AWD1CH_Pos) /*!< 0x08000000 */ -#define ADC_CFGR_AWD1CH_2 (0x04UL << ADC_CFGR_AWD1CH_Pos) /*!< 0x10000000 */ -#define ADC_CFGR_AWD1CH_3 (0x08UL << ADC_CFGR_AWD1CH_Pos) /*!< 0x20000000 */ -#define ADC_CFGR_AWD1CH_4 (0x10UL << ADC_CFGR_AWD1CH_Pos) /*!< 0x40000000 */ - -#define ADC_CFGR_JQDIS_Pos (31U) -#define ADC_CFGR_JQDIS_Msk (0x1UL << ADC_CFGR_JQDIS_Pos) /*!< 0x80000000 */ -#define ADC_CFGR_JQDIS ADC_CFGR_JQDIS_Msk /*!< ADC group injected contexts queue disable */ - -/******************** Bit definition for ADC_CFGR2 register *****************/ -#define ADC_CFGR2_ROVSE_Pos (0U) -#define ADC_CFGR2_ROVSE_Msk (0x1UL << ADC_CFGR2_ROVSE_Pos) /*!< 0x00000001 */ -#define ADC_CFGR2_ROVSE ADC_CFGR2_ROVSE_Msk /*!< ADC oversampler enable on scope ADC group regular */ -#define ADC_CFGR2_JOVSE_Pos (1U) -#define ADC_CFGR2_JOVSE_Msk (0x1UL << ADC_CFGR2_JOVSE_Pos) /*!< 0x00000002 */ -#define ADC_CFGR2_JOVSE ADC_CFGR2_JOVSE_Msk /*!< ADC oversampler enable on scope ADC group injected */ - -#define ADC_CFGR2_OVSR_Pos (2U) -#define ADC_CFGR2_OVSR_Msk (0x7UL << ADC_CFGR2_OVSR_Pos) /*!< 0x0000001C */ -#define ADC_CFGR2_OVSR ADC_CFGR2_OVSR_Msk /*!< ADC oversampling ratio */ -#define ADC_CFGR2_OVSR_0 (0x1UL << ADC_CFGR2_OVSR_Pos) /*!< 0x00000004 */ -#define ADC_CFGR2_OVSR_1 (0x2UL << ADC_CFGR2_OVSR_Pos) /*!< 0x00000008 */ -#define ADC_CFGR2_OVSR_2 (0x4UL << ADC_CFGR2_OVSR_Pos) /*!< 0x00000010 */ - -#define ADC_CFGR2_OVSS_Pos (5U) -#define ADC_CFGR2_OVSS_Msk (0xFUL << ADC_CFGR2_OVSS_Pos) /*!< 0x000001E0 */ -#define ADC_CFGR2_OVSS ADC_CFGR2_OVSS_Msk /*!< ADC oversampling shift */ -#define ADC_CFGR2_OVSS_0 (0x1UL << ADC_CFGR2_OVSS_Pos) /*!< 0x00000020 */ -#define ADC_CFGR2_OVSS_1 (0x2UL << ADC_CFGR2_OVSS_Pos) /*!< 0x00000040 */ -#define ADC_CFGR2_OVSS_2 (0x4UL << ADC_CFGR2_OVSS_Pos) /*!< 0x00000080 */ -#define ADC_CFGR2_OVSS_3 (0x8UL << ADC_CFGR2_OVSS_Pos) /*!< 0x00000100 */ - -#define ADC_CFGR2_TROVS_Pos (9U) -#define ADC_CFGR2_TROVS_Msk (0x1UL << ADC_CFGR2_TROVS_Pos) /*!< 0x00000200 */ -#define ADC_CFGR2_TROVS ADC_CFGR2_TROVS_Msk /*!< ADC oversampling discontinuous mode (triggered mode) for ADC group regular */ -#define ADC_CFGR2_ROVSM_Pos (10U) -#define ADC_CFGR2_ROVSM_Msk (0x1UL << ADC_CFGR2_ROVSM_Pos) /*!< 0x00000400 */ -#define ADC_CFGR2_ROVSM ADC_CFGR2_ROVSM_Msk /*!< ADC oversampling mode managing interlaced conversions of ADC group regular and group injected */ - -/******************** Bit definition for ADC_SMPR1 register *****************/ -#define ADC_SMPR1_SMP0_Pos (0U) -#define ADC_SMPR1_SMP0_Msk (0x7UL << ADC_SMPR1_SMP0_Pos) /*!< 0x00000007 */ -#define ADC_SMPR1_SMP0 ADC_SMPR1_SMP0_Msk /*!< ADC channel 0 sampling time selection */ -#define ADC_SMPR1_SMP0_0 (0x1UL << ADC_SMPR1_SMP0_Pos) /*!< 0x00000001 */ -#define ADC_SMPR1_SMP0_1 (0x2UL << ADC_SMPR1_SMP0_Pos) /*!< 0x00000002 */ -#define ADC_SMPR1_SMP0_2 (0x4UL << ADC_SMPR1_SMP0_Pos) /*!< 0x00000004 */ - -#define ADC_SMPR1_SMP1_Pos (3U) -#define ADC_SMPR1_SMP1_Msk (0x7UL << ADC_SMPR1_SMP1_Pos) /*!< 0x00000038 */ -#define ADC_SMPR1_SMP1 ADC_SMPR1_SMP1_Msk /*!< ADC channel 1 sampling time selection */ -#define ADC_SMPR1_SMP1_0 (0x1UL << ADC_SMPR1_SMP1_Pos) /*!< 0x00000008 */ -#define ADC_SMPR1_SMP1_1 (0x2UL << ADC_SMPR1_SMP1_Pos) /*!< 0x00000010 */ -#define ADC_SMPR1_SMP1_2 (0x4UL << ADC_SMPR1_SMP1_Pos) /*!< 0x00000020 */ - -#define ADC_SMPR1_SMP2_Pos (6U) -#define ADC_SMPR1_SMP2_Msk (0x7UL << ADC_SMPR1_SMP2_Pos) /*!< 0x000001C0 */ -#define ADC_SMPR1_SMP2 ADC_SMPR1_SMP2_Msk /*!< ADC channel 2 sampling time selection */ -#define ADC_SMPR1_SMP2_0 (0x1UL << ADC_SMPR1_SMP2_Pos) /*!< 0x00000040 */ -#define ADC_SMPR1_SMP2_1 (0x2UL << ADC_SMPR1_SMP2_Pos) /*!< 0x00000080 */ -#define ADC_SMPR1_SMP2_2 (0x4UL << ADC_SMPR1_SMP2_Pos) /*!< 0x00000100 */ - -#define ADC_SMPR1_SMP3_Pos (9U) -#define ADC_SMPR1_SMP3_Msk (0x7UL << ADC_SMPR1_SMP3_Pos) /*!< 0x00000E00 */ -#define ADC_SMPR1_SMP3 ADC_SMPR1_SMP3_Msk /*!< ADC channel 3 sampling time selection */ -#define ADC_SMPR1_SMP3_0 (0x1UL << ADC_SMPR1_SMP3_Pos) /*!< 0x00000200 */ -#define ADC_SMPR1_SMP3_1 (0x2UL << ADC_SMPR1_SMP3_Pos) /*!< 0x00000400 */ -#define ADC_SMPR1_SMP3_2 (0x4UL << ADC_SMPR1_SMP3_Pos) /*!< 0x00000800 */ - -#define ADC_SMPR1_SMP4_Pos (12U) -#define ADC_SMPR1_SMP4_Msk (0x7UL << ADC_SMPR1_SMP4_Pos) /*!< 0x00007000 */ -#define ADC_SMPR1_SMP4 ADC_SMPR1_SMP4_Msk /*!< ADC channel 4 sampling time selection */ -#define ADC_SMPR1_SMP4_0 (0x1UL << ADC_SMPR1_SMP4_Pos) /*!< 0x00001000 */ -#define ADC_SMPR1_SMP4_1 (0x2UL << ADC_SMPR1_SMP4_Pos) /*!< 0x00002000 */ -#define ADC_SMPR1_SMP4_2 (0x4UL << ADC_SMPR1_SMP4_Pos) /*!< 0x00004000 */ - -#define ADC_SMPR1_SMP5_Pos (15U) -#define ADC_SMPR1_SMP5_Msk (0x7UL << ADC_SMPR1_SMP5_Pos) /*!< 0x00038000 */ -#define ADC_SMPR1_SMP5 ADC_SMPR1_SMP5_Msk /*!< ADC channel 5 sampling time selection */ -#define ADC_SMPR1_SMP5_0 (0x1UL << ADC_SMPR1_SMP5_Pos) /*!< 0x00008000 */ -#define ADC_SMPR1_SMP5_1 (0x2UL << ADC_SMPR1_SMP5_Pos) /*!< 0x00010000 */ -#define ADC_SMPR1_SMP5_2 (0x4UL << ADC_SMPR1_SMP5_Pos) /*!< 0x00020000 */ - -#define ADC_SMPR1_SMP6_Pos (18U) -#define ADC_SMPR1_SMP6_Msk (0x7UL << ADC_SMPR1_SMP6_Pos) /*!< 0x001C0000 */ -#define ADC_SMPR1_SMP6 ADC_SMPR1_SMP6_Msk /*!< ADC channel 6 sampling time selection */ -#define ADC_SMPR1_SMP6_0 (0x1UL << ADC_SMPR1_SMP6_Pos) /*!< 0x00040000 */ -#define ADC_SMPR1_SMP6_1 (0x2UL << ADC_SMPR1_SMP6_Pos) /*!< 0x00080000 */ -#define ADC_SMPR1_SMP6_2 (0x4UL << ADC_SMPR1_SMP6_Pos) /*!< 0x00100000 */ - -#define ADC_SMPR1_SMP7_Pos (21U) -#define ADC_SMPR1_SMP7_Msk (0x7UL << ADC_SMPR1_SMP7_Pos) /*!< 0x00E00000 */ -#define ADC_SMPR1_SMP7 ADC_SMPR1_SMP7_Msk /*!< ADC channel 7 sampling time selection */ -#define ADC_SMPR1_SMP7_0 (0x1UL << ADC_SMPR1_SMP7_Pos) /*!< 0x00200000 */ -#define ADC_SMPR1_SMP7_1 (0x2UL << ADC_SMPR1_SMP7_Pos) /*!< 0x00400000 */ -#define ADC_SMPR1_SMP7_2 (0x4UL << ADC_SMPR1_SMP7_Pos) /*!< 0x00800000 */ - -#define ADC_SMPR1_SMP8_Pos (24U) -#define ADC_SMPR1_SMP8_Msk (0x7UL << ADC_SMPR1_SMP8_Pos) /*!< 0x07000000 */ -#define ADC_SMPR1_SMP8 ADC_SMPR1_SMP8_Msk /*!< ADC channel 8 sampling time selection */ -#define ADC_SMPR1_SMP8_0 (0x1UL << ADC_SMPR1_SMP8_Pos) /*!< 0x01000000 */ -#define ADC_SMPR1_SMP8_1 (0x2UL << ADC_SMPR1_SMP8_Pos) /*!< 0x02000000 */ -#define ADC_SMPR1_SMP8_2 (0x4UL << ADC_SMPR1_SMP8_Pos) /*!< 0x04000000 */ - -#define ADC_SMPR1_SMP9_Pos (27U) -#define ADC_SMPR1_SMP9_Msk (0x7UL << ADC_SMPR1_SMP9_Pos) /*!< 0x38000000 */ -#define ADC_SMPR1_SMP9 ADC_SMPR1_SMP9_Msk /*!< ADC channel 9 sampling time selection */ -#define ADC_SMPR1_SMP9_0 (0x1UL << ADC_SMPR1_SMP9_Pos) /*!< 0x08000000 */ -#define ADC_SMPR1_SMP9_1 (0x2UL << ADC_SMPR1_SMP9_Pos) /*!< 0x10000000 */ -#define ADC_SMPR1_SMP9_2 (0x4UL << ADC_SMPR1_SMP9_Pos) /*!< 0x20000000 */ - -#define ADC_SMPR1_SMPPLUS_Pos (31U) -#define ADC_SMPR1_SMPPLUS_Msk (0x1UL << ADC_SMPR1_SMPPLUS_Pos) /*!< 0x80000000 */ -#define ADC_SMPR1_SMPPLUS ADC_SMPR1_SMPPLUS_Msk /*!< ADC channels sampling time additional setting */ - -/******************** Bit definition for ADC_SMPR2 register *****************/ -#define ADC_SMPR2_SMP10_Pos (0U) -#define ADC_SMPR2_SMP10_Msk (0x7UL << ADC_SMPR2_SMP10_Pos) /*!< 0x00000007 */ -#define ADC_SMPR2_SMP10 ADC_SMPR2_SMP10_Msk /*!< ADC channel 10 sampling time selection */ -#define ADC_SMPR2_SMP10_0 (0x1UL << ADC_SMPR2_SMP10_Pos) /*!< 0x00000001 */ -#define ADC_SMPR2_SMP10_1 (0x2UL << ADC_SMPR2_SMP10_Pos) /*!< 0x00000002 */ -#define ADC_SMPR2_SMP10_2 (0x4UL << ADC_SMPR2_SMP10_Pos) /*!< 0x00000004 */ - -#define ADC_SMPR2_SMP11_Pos (3U) -#define ADC_SMPR2_SMP11_Msk (0x7UL << ADC_SMPR2_SMP11_Pos) /*!< 0x00000038 */ -#define ADC_SMPR2_SMP11 ADC_SMPR2_SMP11_Msk /*!< ADC channel 11 sampling time selection */ -#define ADC_SMPR2_SMP11_0 (0x1UL << ADC_SMPR2_SMP11_Pos) /*!< 0x00000008 */ -#define ADC_SMPR2_SMP11_1 (0x2UL << ADC_SMPR2_SMP11_Pos) /*!< 0x00000010 */ -#define ADC_SMPR2_SMP11_2 (0x4UL << ADC_SMPR2_SMP11_Pos) /*!< 0x00000020 */ - -#define ADC_SMPR2_SMP12_Pos (6U) -#define ADC_SMPR2_SMP12_Msk (0x7UL << ADC_SMPR2_SMP12_Pos) /*!< 0x000001C0 */ -#define ADC_SMPR2_SMP12 ADC_SMPR2_SMP12_Msk /*!< ADC channel 12 sampling time selection */ -#define ADC_SMPR2_SMP12_0 (0x1UL << ADC_SMPR2_SMP12_Pos) /*!< 0x00000040 */ -#define ADC_SMPR2_SMP12_1 (0x2UL << ADC_SMPR2_SMP12_Pos) /*!< 0x00000080 */ -#define ADC_SMPR2_SMP12_2 (0x4UL << ADC_SMPR2_SMP12_Pos) /*!< 0x00000100 */ - -#define ADC_SMPR2_SMP13_Pos (9U) -#define ADC_SMPR2_SMP13_Msk (0x7UL << ADC_SMPR2_SMP13_Pos) /*!< 0x00000E00 */ -#define ADC_SMPR2_SMP13 ADC_SMPR2_SMP13_Msk /*!< ADC channel 13 sampling time selection */ -#define ADC_SMPR2_SMP13_0 (0x1UL << ADC_SMPR2_SMP13_Pos) /*!< 0x00000200 */ -#define ADC_SMPR2_SMP13_1 (0x2UL << ADC_SMPR2_SMP13_Pos) /*!< 0x00000400 */ -#define ADC_SMPR2_SMP13_2 (0x4UL << ADC_SMPR2_SMP13_Pos) /*!< 0x00000800 */ - -#define ADC_SMPR2_SMP14_Pos (12U) -#define ADC_SMPR2_SMP14_Msk (0x7UL << ADC_SMPR2_SMP14_Pos) /*!< 0x00007000 */ -#define ADC_SMPR2_SMP14 ADC_SMPR2_SMP14_Msk /*!< ADC channel 14 sampling time selection */ -#define ADC_SMPR2_SMP14_0 (0x1UL << ADC_SMPR2_SMP14_Pos) /*!< 0x00001000 */ -#define ADC_SMPR2_SMP14_1 (0x2UL << ADC_SMPR2_SMP14_Pos) /*!< 0x00002000 */ -#define ADC_SMPR2_SMP14_2 (0x4UL << ADC_SMPR2_SMP14_Pos) /*!< 0x00004000 */ - -#define ADC_SMPR2_SMP15_Pos (15U) -#define ADC_SMPR2_SMP15_Msk (0x7UL << ADC_SMPR2_SMP15_Pos) /*!< 0x00038000 */ -#define ADC_SMPR2_SMP15 ADC_SMPR2_SMP15_Msk /*!< ADC channel 15 sampling time selection */ -#define ADC_SMPR2_SMP15_0 (0x1UL << ADC_SMPR2_SMP15_Pos) /*!< 0x00008000 */ -#define ADC_SMPR2_SMP15_1 (0x2UL << ADC_SMPR2_SMP15_Pos) /*!< 0x00010000 */ -#define ADC_SMPR2_SMP15_2 (0x4UL << ADC_SMPR2_SMP15_Pos) /*!< 0x00020000 */ - -#define ADC_SMPR2_SMP16_Pos (18U) -#define ADC_SMPR2_SMP16_Msk (0x7UL << ADC_SMPR2_SMP16_Pos) /*!< 0x001C0000 */ -#define ADC_SMPR2_SMP16 ADC_SMPR2_SMP16_Msk /*!< ADC channel 16 sampling time selection */ -#define ADC_SMPR2_SMP16_0 (0x1UL << ADC_SMPR2_SMP16_Pos) /*!< 0x00040000 */ -#define ADC_SMPR2_SMP16_1 (0x2UL << ADC_SMPR2_SMP16_Pos) /*!< 0x00080000 */ -#define ADC_SMPR2_SMP16_2 (0x4UL << ADC_SMPR2_SMP16_Pos) /*!< 0x00100000 */ - -#define ADC_SMPR2_SMP17_Pos (21U) -#define ADC_SMPR2_SMP17_Msk (0x7UL << ADC_SMPR2_SMP17_Pos) /*!< 0x00E00000 */ -#define ADC_SMPR2_SMP17 ADC_SMPR2_SMP17_Msk /*!< ADC channel 17 sampling time selection */ -#define ADC_SMPR2_SMP17_0 (0x1UL << ADC_SMPR2_SMP17_Pos) /*!< 0x00200000 */ -#define ADC_SMPR2_SMP17_1 (0x2UL << ADC_SMPR2_SMP17_Pos) /*!< 0x00400000 */ -#define ADC_SMPR2_SMP17_2 (0x4UL << ADC_SMPR2_SMP17_Pos) /*!< 0x00800000 */ - -#define ADC_SMPR2_SMP18_Pos (24U) -#define ADC_SMPR2_SMP18_Msk (0x7UL << ADC_SMPR2_SMP18_Pos) /*!< 0x07000000 */ -#define ADC_SMPR2_SMP18 ADC_SMPR2_SMP18_Msk /*!< ADC channel 18 sampling time selection */ -#define ADC_SMPR2_SMP18_0 (0x1UL << ADC_SMPR2_SMP18_Pos) /*!< 0x01000000 */ -#define ADC_SMPR2_SMP18_1 (0x2UL << ADC_SMPR2_SMP18_Pos) /*!< 0x02000000 */ -#define ADC_SMPR2_SMP18_2 (0x4UL << ADC_SMPR2_SMP18_Pos) /*!< 0x04000000 */ - -/******************** Bit definition for ADC_TR1 register *******************/ -#define ADC_TR1_LT1_Pos (0U) -#define ADC_TR1_LT1_Msk (0xFFFUL << ADC_TR1_LT1_Pos) /*!< 0x00000FFF */ -#define ADC_TR1_LT1 ADC_TR1_LT1_Msk /*!< ADC analog watchdog 1 threshold low */ -#define ADC_TR1_LT1_0 (0x001UL << ADC_TR1_LT1_Pos) /*!< 0x00000001 */ -#define ADC_TR1_LT1_1 (0x002UL << ADC_TR1_LT1_Pos) /*!< 0x00000002 */ -#define ADC_TR1_LT1_2 (0x004UL << ADC_TR1_LT1_Pos) /*!< 0x00000004 */ -#define ADC_TR1_LT1_3 (0x008UL << ADC_TR1_LT1_Pos) /*!< 0x00000008 */ -#define ADC_TR1_LT1_4 (0x010UL << ADC_TR1_LT1_Pos) /*!< 0x00000010 */ -#define ADC_TR1_LT1_5 (0x020UL << ADC_TR1_LT1_Pos) /*!< 0x00000020 */ -#define ADC_TR1_LT1_6 (0x040UL << ADC_TR1_LT1_Pos) /*!< 0x00000040 */ -#define ADC_TR1_LT1_7 (0x080UL << ADC_TR1_LT1_Pos) /*!< 0x00000080 */ -#define ADC_TR1_LT1_8 (0x100UL << ADC_TR1_LT1_Pos) /*!< 0x00000100 */ -#define ADC_TR1_LT1_9 (0x200UL << ADC_TR1_LT1_Pos) /*!< 0x00000200 */ -#define ADC_TR1_LT1_10 (0x400UL << ADC_TR1_LT1_Pos) /*!< 0x00000400 */ -#define ADC_TR1_LT1_11 (0x800UL << ADC_TR1_LT1_Pos) /*!< 0x00000800 */ - -#define ADC_TR1_HT1_Pos (16U) -#define ADC_TR1_HT1_Msk (0xFFFUL << ADC_TR1_HT1_Pos) /*!< 0x0FFF0000 */ -#define ADC_TR1_HT1 ADC_TR1_HT1_Msk /*!< ADC Analog watchdog 1 threshold high */ -#define ADC_TR1_HT1_0 (0x001UL << ADC_TR1_HT1_Pos) /*!< 0x00010000 */ -#define ADC_TR1_HT1_1 (0x002UL << ADC_TR1_HT1_Pos) /*!< 0x00020000 */ -#define ADC_TR1_HT1_2 (0x004UL << ADC_TR1_HT1_Pos) /*!< 0x00040000 */ -#define ADC_TR1_HT1_3 (0x008UL << ADC_TR1_HT1_Pos) /*!< 0x00080000 */ -#define ADC_TR1_HT1_4 (0x010UL << ADC_TR1_HT1_Pos) /*!< 0x00100000 */ -#define ADC_TR1_HT1_5 (0x020UL << ADC_TR1_HT1_Pos) /*!< 0x00200000 */ -#define ADC_TR1_HT1_6 (0x040UL << ADC_TR1_HT1_Pos) /*!< 0x00400000 */ -#define ADC_TR1_HT1_7 (0x080UL << ADC_TR1_HT1_Pos) /*!< 0x00800000 */ -#define ADC_TR1_HT1_8 (0x100UL << ADC_TR1_HT1_Pos) /*!< 0x01000000 */ -#define ADC_TR1_HT1_9 (0x200UL << ADC_TR1_HT1_Pos) /*!< 0x02000000 */ -#define ADC_TR1_HT1_10 (0x400UL << ADC_TR1_HT1_Pos) /*!< 0x04000000 */ -#define ADC_TR1_HT1_11 (0x800UL << ADC_TR1_HT1_Pos) /*!< 0x08000000 */ - -/******************** Bit definition for ADC_TR2 register *******************/ -#define ADC_TR2_LT2_Pos (0U) -#define ADC_TR2_LT2_Msk (0xFFUL << ADC_TR2_LT2_Pos) /*!< 0x000000FF */ -#define ADC_TR2_LT2 ADC_TR2_LT2_Msk /*!< ADC analog watchdog 2 threshold low */ -#define ADC_TR2_LT2_0 (0x01UL << ADC_TR2_LT2_Pos) /*!< 0x00000001 */ -#define ADC_TR2_LT2_1 (0x02UL << ADC_TR2_LT2_Pos) /*!< 0x00000002 */ -#define ADC_TR2_LT2_2 (0x04UL << ADC_TR2_LT2_Pos) /*!< 0x00000004 */ -#define ADC_TR2_LT2_3 (0x08UL << ADC_TR2_LT2_Pos) /*!< 0x00000008 */ -#define ADC_TR2_LT2_4 (0x10UL << ADC_TR2_LT2_Pos) /*!< 0x00000010 */ -#define ADC_TR2_LT2_5 (0x20UL << ADC_TR2_LT2_Pos) /*!< 0x00000020 */ -#define ADC_TR2_LT2_6 (0x40UL << ADC_TR2_LT2_Pos) /*!< 0x00000040 */ -#define ADC_TR2_LT2_7 (0x80UL << ADC_TR2_LT2_Pos) /*!< 0x00000080 */ - -#define ADC_TR2_HT2_Pos (16U) -#define ADC_TR2_HT2_Msk (0xFFUL << ADC_TR2_HT2_Pos) /*!< 0x00FF0000 */ -#define ADC_TR2_HT2 ADC_TR2_HT2_Msk /*!< ADC analog watchdog 2 threshold high */ -#define ADC_TR2_HT2_0 (0x01UL << ADC_TR2_HT2_Pos) /*!< 0x00010000 */ -#define ADC_TR2_HT2_1 (0x02UL << ADC_TR2_HT2_Pos) /*!< 0x00020000 */ -#define ADC_TR2_HT2_2 (0x04UL << ADC_TR2_HT2_Pos) /*!< 0x00040000 */ -#define ADC_TR2_HT2_3 (0x08UL << ADC_TR2_HT2_Pos) /*!< 0x00080000 */ -#define ADC_TR2_HT2_4 (0x10UL << ADC_TR2_HT2_Pos) /*!< 0x00100000 */ -#define ADC_TR2_HT2_5 (0x20UL << ADC_TR2_HT2_Pos) /*!< 0x00200000 */ -#define ADC_TR2_HT2_6 (0x40UL << ADC_TR2_HT2_Pos) /*!< 0x00400000 */ -#define ADC_TR2_HT2_7 (0x80UL << ADC_TR2_HT2_Pos) /*!< 0x00800000 */ - -/******************** Bit definition for ADC_TR3 register *******************/ -#define ADC_TR3_LT3_Pos (0U) -#define ADC_TR3_LT3_Msk (0xFFUL << ADC_TR3_LT3_Pos) /*!< 0x000000FF */ -#define ADC_TR3_LT3 ADC_TR3_LT3_Msk /*!< ADC analog watchdog 3 threshold low */ -#define ADC_TR3_LT3_0 (0x01UL << ADC_TR3_LT3_Pos) /*!< 0x00000001 */ -#define ADC_TR3_LT3_1 (0x02UL << ADC_TR3_LT3_Pos) /*!< 0x00000002 */ -#define ADC_TR3_LT3_2 (0x04UL << ADC_TR3_LT3_Pos) /*!< 0x00000004 */ -#define ADC_TR3_LT3_3 (0x08UL << ADC_TR3_LT3_Pos) /*!< 0x00000008 */ -#define ADC_TR3_LT3_4 (0x10UL << ADC_TR3_LT3_Pos) /*!< 0x00000010 */ -#define ADC_TR3_LT3_5 (0x20UL << ADC_TR3_LT3_Pos) /*!< 0x00000020 */ -#define ADC_TR3_LT3_6 (0x40UL << ADC_TR3_LT3_Pos) /*!< 0x00000040 */ -#define ADC_TR3_LT3_7 (0x80UL << ADC_TR3_LT3_Pos) /*!< 0x00000080 */ - -#define ADC_TR3_HT3_Pos (16U) -#define ADC_TR3_HT3_Msk (0xFFUL << ADC_TR3_HT3_Pos) /*!< 0x00FF0000 */ -#define ADC_TR3_HT3 ADC_TR3_HT3_Msk /*!< ADC analog watchdog 3 threshold high */ -#define ADC_TR3_HT3_0 (0x01UL << ADC_TR3_HT3_Pos) /*!< 0x00010000 */ -#define ADC_TR3_HT3_1 (0x02UL << ADC_TR3_HT3_Pos) /*!< 0x00020000 */ -#define ADC_TR3_HT3_2 (0x04UL << ADC_TR3_HT3_Pos) /*!< 0x00040000 */ -#define ADC_TR3_HT3_3 (0x08UL << ADC_TR3_HT3_Pos) /*!< 0x00080000 */ -#define ADC_TR3_HT3_4 (0x10UL << ADC_TR3_HT3_Pos) /*!< 0x00100000 */ -#define ADC_TR3_HT3_5 (0x20UL << ADC_TR3_HT3_Pos) /*!< 0x00200000 */ -#define ADC_TR3_HT3_6 (0x40UL << ADC_TR3_HT3_Pos) /*!< 0x00400000 */ -#define ADC_TR3_HT3_7 (0x80UL << ADC_TR3_HT3_Pos) /*!< 0x00800000 */ - -/******************** Bit definition for ADC_SQR1 register ******************/ -#define ADC_SQR1_L_Pos (0U) -#define ADC_SQR1_L_Msk (0xFUL << ADC_SQR1_L_Pos) /*!< 0x0000000F */ -#define ADC_SQR1_L ADC_SQR1_L_Msk /*!< ADC group regular sequencer scan length */ -#define ADC_SQR1_L_0 (0x1UL << ADC_SQR1_L_Pos) /*!< 0x00000001 */ -#define ADC_SQR1_L_1 (0x2UL << ADC_SQR1_L_Pos) /*!< 0x00000002 */ -#define ADC_SQR1_L_2 (0x4UL << ADC_SQR1_L_Pos) /*!< 0x00000004 */ -#define ADC_SQR1_L_3 (0x8UL << ADC_SQR1_L_Pos) /*!< 0x00000008 */ - -#define ADC_SQR1_SQ1_Pos (6U) -#define ADC_SQR1_SQ1_Msk (0x1FUL << ADC_SQR1_SQ1_Pos) /*!< 0x000007C0 */ -#define ADC_SQR1_SQ1 ADC_SQR1_SQ1_Msk /*!< ADC group regular sequencer rank 1 */ -#define ADC_SQR1_SQ1_0 (0x01UL << ADC_SQR1_SQ1_Pos) /*!< 0x00000040 */ -#define ADC_SQR1_SQ1_1 (0x02UL << ADC_SQR1_SQ1_Pos) /*!< 0x00000080 */ -#define ADC_SQR1_SQ1_2 (0x04UL << ADC_SQR1_SQ1_Pos) /*!< 0x00000100 */ -#define ADC_SQR1_SQ1_3 (0x08UL << ADC_SQR1_SQ1_Pos) /*!< 0x00000200 */ -#define ADC_SQR1_SQ1_4 (0x10UL << ADC_SQR1_SQ1_Pos) /*!< 0x00000400 */ - -#define ADC_SQR1_SQ2_Pos (12U) -#define ADC_SQR1_SQ2_Msk (0x1FUL << ADC_SQR1_SQ2_Pos) /*!< 0x0001F000 */ -#define ADC_SQR1_SQ2 ADC_SQR1_SQ2_Msk /*!< ADC group regular sequencer rank 2 */ -#define ADC_SQR1_SQ2_0 (0x01UL << ADC_SQR1_SQ2_Pos) /*!< 0x00001000 */ -#define ADC_SQR1_SQ2_1 (0x02UL << ADC_SQR1_SQ2_Pos) /*!< 0x00002000 */ -#define ADC_SQR1_SQ2_2 (0x04UL << ADC_SQR1_SQ2_Pos) /*!< 0x00004000 */ -#define ADC_SQR1_SQ2_3 (0x08UL << ADC_SQR1_SQ2_Pos) /*!< 0x00008000 */ -#define ADC_SQR1_SQ2_4 (0x10UL << ADC_SQR1_SQ2_Pos) /*!< 0x00010000 */ - -#define ADC_SQR1_SQ3_Pos (18U) -#define ADC_SQR1_SQ3_Msk (0x1FUL << ADC_SQR1_SQ3_Pos) /*!< 0x007C0000 */ -#define ADC_SQR1_SQ3 ADC_SQR1_SQ3_Msk /*!< ADC group regular sequencer rank 3 */ -#define ADC_SQR1_SQ3_0 (0x01UL << ADC_SQR1_SQ3_Pos) /*!< 0x00040000 */ -#define ADC_SQR1_SQ3_1 (0x02UL << ADC_SQR1_SQ3_Pos) /*!< 0x00080000 */ -#define ADC_SQR1_SQ3_2 (0x04UL << ADC_SQR1_SQ3_Pos) /*!< 0x00100000 */ -#define ADC_SQR1_SQ3_3 (0x08UL << ADC_SQR1_SQ3_Pos) /*!< 0x00200000 */ -#define ADC_SQR1_SQ3_4 (0x10UL << ADC_SQR1_SQ3_Pos) /*!< 0x00400000 */ - -#define ADC_SQR1_SQ4_Pos (24U) -#define ADC_SQR1_SQ4_Msk (0x1FUL << ADC_SQR1_SQ4_Pos) /*!< 0x1F000000 */ -#define ADC_SQR1_SQ4 ADC_SQR1_SQ4_Msk /*!< ADC group regular sequencer rank 4 */ -#define ADC_SQR1_SQ4_0 (0x01UL << ADC_SQR1_SQ4_Pos) /*!< 0x01000000 */ -#define ADC_SQR1_SQ4_1 (0x02UL << ADC_SQR1_SQ4_Pos) /*!< 0x02000000 */ -#define ADC_SQR1_SQ4_2 (0x04UL << ADC_SQR1_SQ4_Pos) /*!< 0x04000000 */ -#define ADC_SQR1_SQ4_3 (0x08UL << ADC_SQR1_SQ4_Pos) /*!< 0x08000000 */ -#define ADC_SQR1_SQ4_4 (0x10UL << ADC_SQR1_SQ4_Pos) /*!< 0x10000000 */ - -/******************** Bit definition for ADC_SQR2 register ******************/ -#define ADC_SQR2_SQ5_Pos (0U) -#define ADC_SQR2_SQ5_Msk (0x1FUL << ADC_SQR2_SQ5_Pos) /*!< 0x0000001F */ -#define ADC_SQR2_SQ5 ADC_SQR2_SQ5_Msk /*!< ADC group regular sequencer rank 5 */ -#define ADC_SQR2_SQ5_0 (0x01UL << ADC_SQR2_SQ5_Pos) /*!< 0x00000001 */ -#define ADC_SQR2_SQ5_1 (0x02UL << ADC_SQR2_SQ5_Pos) /*!< 0x00000002 */ -#define ADC_SQR2_SQ5_2 (0x04UL << ADC_SQR2_SQ5_Pos) /*!< 0x00000004 */ -#define ADC_SQR2_SQ5_3 (0x08UL << ADC_SQR2_SQ5_Pos) /*!< 0x00000008 */ -#define ADC_SQR2_SQ5_4 (0x10UL << ADC_SQR2_SQ5_Pos) /*!< 0x00000010 */ - -#define ADC_SQR2_SQ6_Pos (6U) -#define ADC_SQR2_SQ6_Msk (0x1FUL << ADC_SQR2_SQ6_Pos) /*!< 0x000007C0 */ -#define ADC_SQR2_SQ6 ADC_SQR2_SQ6_Msk /*!< ADC group regular sequencer rank 6 */ -#define ADC_SQR2_SQ6_0 (0x01UL << ADC_SQR2_SQ6_Pos) /*!< 0x00000040 */ -#define ADC_SQR2_SQ6_1 (0x02UL << ADC_SQR2_SQ6_Pos) /*!< 0x00000080 */ -#define ADC_SQR2_SQ6_2 (0x04UL << ADC_SQR2_SQ6_Pos) /*!< 0x00000100 */ -#define ADC_SQR2_SQ6_3 (0x08UL << ADC_SQR2_SQ6_Pos) /*!< 0x00000200 */ -#define ADC_SQR2_SQ6_4 (0x10UL << ADC_SQR2_SQ6_Pos) /*!< 0x00000400 */ - -#define ADC_SQR2_SQ7_Pos (12U) -#define ADC_SQR2_SQ7_Msk (0x1FUL << ADC_SQR2_SQ7_Pos) /*!< 0x0001F000 */ -#define ADC_SQR2_SQ7 ADC_SQR2_SQ7_Msk /*!< ADC group regular sequencer rank 7 */ -#define ADC_SQR2_SQ7_0 (0x01UL << ADC_SQR2_SQ7_Pos) /*!< 0x00001000 */ -#define ADC_SQR2_SQ7_1 (0x02UL << ADC_SQR2_SQ7_Pos) /*!< 0x00002000 */ -#define ADC_SQR2_SQ7_2 (0x04UL << ADC_SQR2_SQ7_Pos) /*!< 0x00004000 */ -#define ADC_SQR2_SQ7_3 (0x08UL << ADC_SQR2_SQ7_Pos) /*!< 0x00008000 */ -#define ADC_SQR2_SQ7_4 (0x10UL << ADC_SQR2_SQ7_Pos) /*!< 0x00010000 */ - -#define ADC_SQR2_SQ8_Pos (18U) -#define ADC_SQR2_SQ8_Msk (0x1FUL << ADC_SQR2_SQ8_Pos) /*!< 0x007C0000 */ -#define ADC_SQR2_SQ8 ADC_SQR2_SQ8_Msk /*!< ADC group regular sequencer rank 8 */ -#define ADC_SQR2_SQ8_0 (0x01UL << ADC_SQR2_SQ8_Pos) /*!< 0x00040000 */ -#define ADC_SQR2_SQ8_1 (0x02UL << ADC_SQR2_SQ8_Pos) /*!< 0x00080000 */ -#define ADC_SQR2_SQ8_2 (0x04UL << ADC_SQR2_SQ8_Pos) /*!< 0x00100000 */ -#define ADC_SQR2_SQ8_3 (0x08UL << ADC_SQR2_SQ8_Pos) /*!< 0x00200000 */ -#define ADC_SQR2_SQ8_4 (0x10UL << ADC_SQR2_SQ8_Pos) /*!< 0x00400000 */ - -#define ADC_SQR2_SQ9_Pos (24U) -#define ADC_SQR2_SQ9_Msk (0x1FUL << ADC_SQR2_SQ9_Pos) /*!< 0x1F000000 */ -#define ADC_SQR2_SQ9 ADC_SQR2_SQ9_Msk /*!< ADC group regular sequencer rank 9 */ -#define ADC_SQR2_SQ9_0 (0x01UL << ADC_SQR2_SQ9_Pos) /*!< 0x01000000 */ -#define ADC_SQR2_SQ9_1 (0x02UL << ADC_SQR2_SQ9_Pos) /*!< 0x02000000 */ -#define ADC_SQR2_SQ9_2 (0x04UL << ADC_SQR2_SQ9_Pos) /*!< 0x04000000 */ -#define ADC_SQR2_SQ9_3 (0x08UL << ADC_SQR2_SQ9_Pos) /*!< 0x08000000 */ -#define ADC_SQR2_SQ9_4 (0x10UL << ADC_SQR2_SQ9_Pos) /*!< 0x10000000 */ - -/******************** Bit definition for ADC_SQR3 register ******************/ -#define ADC_SQR3_SQ10_Pos (0U) -#define ADC_SQR3_SQ10_Msk (0x1FUL << ADC_SQR3_SQ10_Pos) /*!< 0x0000001F */ -#define ADC_SQR3_SQ10 ADC_SQR3_SQ10_Msk /*!< ADC group regular sequencer rank 10 */ -#define ADC_SQR3_SQ10_0 (0x01UL << ADC_SQR3_SQ10_Pos) /*!< 0x00000001 */ -#define ADC_SQR3_SQ10_1 (0x02UL << ADC_SQR3_SQ10_Pos) /*!< 0x00000002 */ -#define ADC_SQR3_SQ10_2 (0x04UL << ADC_SQR3_SQ10_Pos) /*!< 0x00000004 */ -#define ADC_SQR3_SQ10_3 (0x08UL << ADC_SQR3_SQ10_Pos) /*!< 0x00000008 */ -#define ADC_SQR3_SQ10_4 (0x10UL << ADC_SQR3_SQ10_Pos) /*!< 0x00000010 */ - -#define ADC_SQR3_SQ11_Pos (6U) -#define ADC_SQR3_SQ11_Msk (0x1FUL << ADC_SQR3_SQ11_Pos) /*!< 0x000007C0 */ -#define ADC_SQR3_SQ11 ADC_SQR3_SQ11_Msk /*!< ADC group regular sequencer rank 11 */ -#define ADC_SQR3_SQ11_0 (0x01UL << ADC_SQR3_SQ11_Pos) /*!< 0x00000040 */ -#define ADC_SQR3_SQ11_1 (0x02UL << ADC_SQR3_SQ11_Pos) /*!< 0x00000080 */ -#define ADC_SQR3_SQ11_2 (0x04UL << ADC_SQR3_SQ11_Pos) /*!< 0x00000100 */ -#define ADC_SQR3_SQ11_3 (0x08UL << ADC_SQR3_SQ11_Pos) /*!< 0x00000200 */ -#define ADC_SQR3_SQ11_4 (0x10UL << ADC_SQR3_SQ11_Pos) /*!< 0x00000400 */ - -#define ADC_SQR3_SQ12_Pos (12U) -#define ADC_SQR3_SQ12_Msk (0x1FUL << ADC_SQR3_SQ12_Pos) /*!< 0x0001F000 */ -#define ADC_SQR3_SQ12 ADC_SQR3_SQ12_Msk /*!< ADC group regular sequencer rank 12 */ -#define ADC_SQR3_SQ12_0 (0x01UL << ADC_SQR3_SQ12_Pos) /*!< 0x00001000 */ -#define ADC_SQR3_SQ12_1 (0x02UL << ADC_SQR3_SQ12_Pos) /*!< 0x00002000 */ -#define ADC_SQR3_SQ12_2 (0x04UL << ADC_SQR3_SQ12_Pos) /*!< 0x00004000 */ -#define ADC_SQR3_SQ12_3 (0x08UL << ADC_SQR3_SQ12_Pos) /*!< 0x00008000 */ -#define ADC_SQR3_SQ12_4 (0x10UL << ADC_SQR3_SQ12_Pos) /*!< 0x00010000 */ - -#define ADC_SQR3_SQ13_Pos (18U) -#define ADC_SQR3_SQ13_Msk (0x1FUL << ADC_SQR3_SQ13_Pos) /*!< 0x007C0000 */ -#define ADC_SQR3_SQ13 ADC_SQR3_SQ13_Msk /*!< ADC group regular sequencer rank 13 */ -#define ADC_SQR3_SQ13_0 (0x01UL << ADC_SQR3_SQ13_Pos) /*!< 0x00040000 */ -#define ADC_SQR3_SQ13_1 (0x02UL << ADC_SQR3_SQ13_Pos) /*!< 0x00080000 */ -#define ADC_SQR3_SQ13_2 (0x04UL << ADC_SQR3_SQ13_Pos) /*!< 0x00100000 */ -#define ADC_SQR3_SQ13_3 (0x08UL << ADC_SQR3_SQ13_Pos) /*!< 0x00200000 */ -#define ADC_SQR3_SQ13_4 (0x10UL << ADC_SQR3_SQ13_Pos) /*!< 0x00400000 */ - -#define ADC_SQR3_SQ14_Pos (24U) -#define ADC_SQR3_SQ14_Msk (0x1FUL << ADC_SQR3_SQ14_Pos) /*!< 0x1F000000 */ -#define ADC_SQR3_SQ14 ADC_SQR3_SQ14_Msk /*!< ADC group regular sequencer rank 14 */ -#define ADC_SQR3_SQ14_0 (0x01UL << ADC_SQR3_SQ14_Pos) /*!< 0x01000000 */ -#define ADC_SQR3_SQ14_1 (0x02UL << ADC_SQR3_SQ14_Pos) /*!< 0x02000000 */ -#define ADC_SQR3_SQ14_2 (0x04UL << ADC_SQR3_SQ14_Pos) /*!< 0x04000000 */ -#define ADC_SQR3_SQ14_3 (0x08UL << ADC_SQR3_SQ14_Pos) /*!< 0x08000000 */ -#define ADC_SQR3_SQ14_4 (0x10UL << ADC_SQR3_SQ14_Pos) /*!< 0x10000000 */ - -/******************** Bit definition for ADC_SQR4 register ******************/ -#define ADC_SQR4_SQ15_Pos (0U) -#define ADC_SQR4_SQ15_Msk (0x1FUL << ADC_SQR4_SQ15_Pos) /*!< 0x0000001F */ -#define ADC_SQR4_SQ15 ADC_SQR4_SQ15_Msk /*!< ADC group regular sequencer rank 15 */ -#define ADC_SQR4_SQ15_0 (0x01UL << ADC_SQR4_SQ15_Pos) /*!< 0x00000001 */ -#define ADC_SQR4_SQ15_1 (0x02UL << ADC_SQR4_SQ15_Pos) /*!< 0x00000002 */ -#define ADC_SQR4_SQ15_2 (0x04UL << ADC_SQR4_SQ15_Pos) /*!< 0x00000004 */ -#define ADC_SQR4_SQ15_3 (0x08UL << ADC_SQR4_SQ15_Pos) /*!< 0x00000008 */ -#define ADC_SQR4_SQ15_4 (0x10UL << ADC_SQR4_SQ15_Pos) /*!< 0x00000010 */ - -#define ADC_SQR4_SQ16_Pos (6U) -#define ADC_SQR4_SQ16_Msk (0x1FUL << ADC_SQR4_SQ16_Pos) /*!< 0x000007C0 */ -#define ADC_SQR4_SQ16 ADC_SQR4_SQ16_Msk /*!< ADC group regular sequencer rank 16 */ -#define ADC_SQR4_SQ16_0 (0x01UL << ADC_SQR4_SQ16_Pos) /*!< 0x00000040 */ -#define ADC_SQR4_SQ16_1 (0x02UL << ADC_SQR4_SQ16_Pos) /*!< 0x00000080 */ -#define ADC_SQR4_SQ16_2 (0x04UL << ADC_SQR4_SQ16_Pos) /*!< 0x00000100 */ -#define ADC_SQR4_SQ16_3 (0x08UL << ADC_SQR4_SQ16_Pos) /*!< 0x00000200 */ -#define ADC_SQR4_SQ16_4 (0x10UL << ADC_SQR4_SQ16_Pos) /*!< 0x00000400 */ - -/******************** Bit definition for ADC_DR register ********************/ -#define ADC_DR_RDATA_Pos (0U) -#define ADC_DR_RDATA_Msk (0xFFFFUL << ADC_DR_RDATA_Pos) /*!< 0x0000FFFF */ -#define ADC_DR_RDATA ADC_DR_RDATA_Msk /*!< ADC group regular conversion data */ -#define ADC_DR_RDATA_0 (0x0001UL << ADC_DR_RDATA_Pos) /*!< 0x00000001 */ -#define ADC_DR_RDATA_1 (0x0002UL << ADC_DR_RDATA_Pos) /*!< 0x00000002 */ -#define ADC_DR_RDATA_2 (0x0004UL << ADC_DR_RDATA_Pos) /*!< 0x00000004 */ -#define ADC_DR_RDATA_3 (0x0008UL << ADC_DR_RDATA_Pos) /*!< 0x00000008 */ -#define ADC_DR_RDATA_4 (0x0010UL << ADC_DR_RDATA_Pos) /*!< 0x00000010 */ -#define ADC_DR_RDATA_5 (0x0020UL << ADC_DR_RDATA_Pos) /*!< 0x00000020 */ -#define ADC_DR_RDATA_6 (0x0040UL << ADC_DR_RDATA_Pos) /*!< 0x00000040 */ -#define ADC_DR_RDATA_7 (0x0080UL << ADC_DR_RDATA_Pos) /*!< 0x00000080 */ -#define ADC_DR_RDATA_8 (0x0100UL << ADC_DR_RDATA_Pos) /*!< 0x00000100 */ -#define ADC_DR_RDATA_9 (0x0200UL << ADC_DR_RDATA_Pos) /*!< 0x00000200 */ -#define ADC_DR_RDATA_10 (0x0400UL << ADC_DR_RDATA_Pos) /*!< 0x00000400 */ -#define ADC_DR_RDATA_11 (0x0800UL << ADC_DR_RDATA_Pos) /*!< 0x00000800 */ -#define ADC_DR_RDATA_12 (0x1000UL << ADC_DR_RDATA_Pos) /*!< 0x00001000 */ -#define ADC_DR_RDATA_13 (0x2000UL << ADC_DR_RDATA_Pos) /*!< 0x00002000 */ -#define ADC_DR_RDATA_14 (0x4000UL << ADC_DR_RDATA_Pos) /*!< 0x00004000 */ -#define ADC_DR_RDATA_15 (0x8000UL << ADC_DR_RDATA_Pos) /*!< 0x00008000 */ - -/******************** Bit definition for ADC_JSQR register ******************/ -#define ADC_JSQR_JL_Pos (0U) -#define ADC_JSQR_JL_Msk (0x3UL << ADC_JSQR_JL_Pos) /*!< 0x00000003 */ -#define ADC_JSQR_JL ADC_JSQR_JL_Msk /*!< ADC group injected sequencer scan length */ -#define ADC_JSQR_JL_0 (0x1UL << ADC_JSQR_JL_Pos) /*!< 0x00000001 */ -#define ADC_JSQR_JL_1 (0x2UL << ADC_JSQR_JL_Pos) /*!< 0x00000002 */ - -#define ADC_JSQR_JEXTSEL_Pos (2U) -#define ADC_JSQR_JEXTSEL_Msk (0xFUL << ADC_JSQR_JEXTSEL_Pos) /*!< 0x0000003C */ -#define ADC_JSQR_JEXTSEL ADC_JSQR_JEXTSEL_Msk /*!< ADC group injected external trigger source */ -#define ADC_JSQR_JEXTSEL_0 (0x1UL << ADC_JSQR_JEXTSEL_Pos) /*!< 0x00000004 */ -#define ADC_JSQR_JEXTSEL_1 (0x2UL << ADC_JSQR_JEXTSEL_Pos) /*!< 0x00000008 */ -#define ADC_JSQR_JEXTSEL_2 (0x4UL << ADC_JSQR_JEXTSEL_Pos) /*!< 0x00000010 */ -#define ADC_JSQR_JEXTSEL_3 (0x8UL << ADC_JSQR_JEXTSEL_Pos) /*!< 0x00000020 */ - -#define ADC_JSQR_JEXTEN_Pos (6U) -#define ADC_JSQR_JEXTEN_Msk (0x3UL << ADC_JSQR_JEXTEN_Pos) /*!< 0x000000C0 */ -#define ADC_JSQR_JEXTEN ADC_JSQR_JEXTEN_Msk /*!< ADC group injected external trigger polarity */ -#define ADC_JSQR_JEXTEN_0 (0x1UL << ADC_JSQR_JEXTEN_Pos) /*!< 0x00000040 */ -#define ADC_JSQR_JEXTEN_1 (0x2UL << ADC_JSQR_JEXTEN_Pos) /*!< 0x00000080 */ - -#define ADC_JSQR_JSQ1_Pos (8U) -#define ADC_JSQR_JSQ1_Msk (0x1FUL << ADC_JSQR_JSQ1_Pos) /*!< 0x00001F00 */ -#define ADC_JSQR_JSQ1 ADC_JSQR_JSQ1_Msk /*!< ADC group injected sequencer rank 1 */ -#define ADC_JSQR_JSQ1_0 (0x01UL << ADC_JSQR_JSQ1_Pos) /*!< 0x00000100 */ -#define ADC_JSQR_JSQ1_1 (0x02UL << ADC_JSQR_JSQ1_Pos) /*!< 0x00000200 */ -#define ADC_JSQR_JSQ1_2 (0x04UL << ADC_JSQR_JSQ1_Pos) /*!< 0x00000400 */ -#define ADC_JSQR_JSQ1_3 (0x08UL << ADC_JSQR_JSQ1_Pos) /*!< 0x00000800 */ -#define ADC_JSQR_JSQ1_4 (0x10UL << ADC_JSQR_JSQ1_Pos) /*!< 0x00001000 */ - -#define ADC_JSQR_JSQ2_Pos (14U) -#define ADC_JSQR_JSQ2_Msk (0x1FUL << ADC_JSQR_JSQ2_Pos) /*!< 0x0007C000 */ -#define ADC_JSQR_JSQ2 ADC_JSQR_JSQ2_Msk /*!< ADC group injected sequencer rank 2 */ -#define ADC_JSQR_JSQ2_0 (0x01UL << ADC_JSQR_JSQ2_Pos) /*!< 0x00004000 */ -#define ADC_JSQR_JSQ2_1 (0x02UL << ADC_JSQR_JSQ2_Pos) /*!< 0x00008000 */ -#define ADC_JSQR_JSQ2_2 (0x04UL << ADC_JSQR_JSQ2_Pos) /*!< 0x00010000 */ -#define ADC_JSQR_JSQ2_3 (0x08UL << ADC_JSQR_JSQ2_Pos) /*!< 0x00020000 */ -#define ADC_JSQR_JSQ2_4 (0x10UL << ADC_JSQR_JSQ2_Pos) /*!< 0x00040000 */ - -#define ADC_JSQR_JSQ3_Pos (20U) -#define ADC_JSQR_JSQ3_Msk (0x1FUL << ADC_JSQR_JSQ3_Pos) /*!< 0x01F00000 */ -#define ADC_JSQR_JSQ3 ADC_JSQR_JSQ3_Msk /*!< ADC group injected sequencer rank 3 */ -#define ADC_JSQR_JSQ3_0 (0x01UL << ADC_JSQR_JSQ3_Pos) /*!< 0x00100000 */ -#define ADC_JSQR_JSQ3_1 (0x02UL << ADC_JSQR_JSQ3_Pos) /*!< 0x00200000 */ -#define ADC_JSQR_JSQ3_2 (0x04UL << ADC_JSQR_JSQ3_Pos) /*!< 0x00400000 */ -#define ADC_JSQR_JSQ3_3 (0x08UL << ADC_JSQR_JSQ3_Pos) /*!< 0x00800000 */ -#define ADC_JSQR_JSQ3_4 (0x10UL << ADC_JSQR_JSQ3_Pos) /*!< 0x01000000 */ - -#define ADC_JSQR_JSQ4_Pos (26U) -#define ADC_JSQR_JSQ4_Msk (0x1FUL << ADC_JSQR_JSQ4_Pos) /*!< 0x7C000000 */ -#define ADC_JSQR_JSQ4 ADC_JSQR_JSQ4_Msk /*!< ADC group injected sequencer rank 4 */ -#define ADC_JSQR_JSQ4_0 (0x01UL << ADC_JSQR_JSQ4_Pos) /*!< 0x04000000 */ -#define ADC_JSQR_JSQ4_1 (0x02UL << ADC_JSQR_JSQ4_Pos) /*!< 0x08000000 */ -#define ADC_JSQR_JSQ4_2 (0x04UL << ADC_JSQR_JSQ4_Pos) /*!< 0x10000000 */ -#define ADC_JSQR_JSQ4_3 (0x08UL << ADC_JSQR_JSQ4_Pos) /*!< 0x20000000 */ -#define ADC_JSQR_JSQ4_4 (0x10UL << ADC_JSQR_JSQ4_Pos) /*!< 0x40000000 */ - -/******************** Bit definition for ADC_OFR1 register ******************/ -#define ADC_OFR1_OFFSET1_Pos (0U) -#define ADC_OFR1_OFFSET1_Msk (0xFFFUL << ADC_OFR1_OFFSET1_Pos) /*!< 0x00000FFF */ -#define ADC_OFR1_OFFSET1 ADC_OFR1_OFFSET1_Msk /*!< ADC offset number 1 offset level */ -#define ADC_OFR1_OFFSET1_0 (0x001UL << ADC_OFR1_OFFSET1_Pos) /*!< 0x00000001 */ -#define ADC_OFR1_OFFSET1_1 (0x002UL << ADC_OFR1_OFFSET1_Pos) /*!< 0x00000002 */ -#define ADC_OFR1_OFFSET1_2 (0x004UL << ADC_OFR1_OFFSET1_Pos) /*!< 0x00000004 */ -#define ADC_OFR1_OFFSET1_3 (0x008UL << ADC_OFR1_OFFSET1_Pos) /*!< 0x00000008 */ -#define ADC_OFR1_OFFSET1_4 (0x010UL << ADC_OFR1_OFFSET1_Pos) /*!< 0x00000010 */ -#define ADC_OFR1_OFFSET1_5 (0x020UL << ADC_OFR1_OFFSET1_Pos) /*!< 0x00000020 */ -#define ADC_OFR1_OFFSET1_6 (0x040UL << ADC_OFR1_OFFSET1_Pos) /*!< 0x00000040 */ -#define ADC_OFR1_OFFSET1_7 (0x080UL << ADC_OFR1_OFFSET1_Pos) /*!< 0x00000080 */ -#define ADC_OFR1_OFFSET1_8 (0x100UL << ADC_OFR1_OFFSET1_Pos) /*!< 0x00000100 */ -#define ADC_OFR1_OFFSET1_9 (0x200UL << ADC_OFR1_OFFSET1_Pos) /*!< 0x00000200 */ -#define ADC_OFR1_OFFSET1_10 (0x400UL << ADC_OFR1_OFFSET1_Pos) /*!< 0x00000400 */ -#define ADC_OFR1_OFFSET1_11 (0x800UL << ADC_OFR1_OFFSET1_Pos) /*!< 0x00000800 */ - -#define ADC_OFR1_OFFSET1_CH_Pos (26U) -#define ADC_OFR1_OFFSET1_CH_Msk (0x1FUL << ADC_OFR1_OFFSET1_CH_Pos) /*!< 0x7C000000 */ -#define ADC_OFR1_OFFSET1_CH ADC_OFR1_OFFSET1_CH_Msk /*!< ADC offset number 1 channel selection */ -#define ADC_OFR1_OFFSET1_CH_0 (0x01UL << ADC_OFR1_OFFSET1_CH_Pos) /*!< 0x04000000 */ -#define ADC_OFR1_OFFSET1_CH_1 (0x02UL << ADC_OFR1_OFFSET1_CH_Pos) /*!< 0x08000000 */ -#define ADC_OFR1_OFFSET1_CH_2 (0x04UL << ADC_OFR1_OFFSET1_CH_Pos) /*!< 0x10000000 */ -#define ADC_OFR1_OFFSET1_CH_3 (0x08UL << ADC_OFR1_OFFSET1_CH_Pos) /*!< 0x20000000 */ -#define ADC_OFR1_OFFSET1_CH_4 (0x10UL << ADC_OFR1_OFFSET1_CH_Pos) /*!< 0x40000000 */ - -#define ADC_OFR1_OFFSET1_EN_Pos (31U) -#define ADC_OFR1_OFFSET1_EN_Msk (0x1UL << ADC_OFR1_OFFSET1_EN_Pos) /*!< 0x80000000 */ -#define ADC_OFR1_OFFSET1_EN ADC_OFR1_OFFSET1_EN_Msk /*!< ADC offset number 1 enable */ - -/******************** Bit definition for ADC_OFR2 register ******************/ -#define ADC_OFR2_OFFSET2_Pos (0U) -#define ADC_OFR2_OFFSET2_Msk (0xFFFUL << ADC_OFR2_OFFSET2_Pos) /*!< 0x00000FFF */ -#define ADC_OFR2_OFFSET2 ADC_OFR2_OFFSET2_Msk /*!< ADC offset number 2 offset level */ -#define ADC_OFR2_OFFSET2_0 (0x001UL << ADC_OFR2_OFFSET2_Pos) /*!< 0x00000001 */ -#define ADC_OFR2_OFFSET2_1 (0x002UL << ADC_OFR2_OFFSET2_Pos) /*!< 0x00000002 */ -#define ADC_OFR2_OFFSET2_2 (0x004UL << ADC_OFR2_OFFSET2_Pos) /*!< 0x00000004 */ -#define ADC_OFR2_OFFSET2_3 (0x008UL << ADC_OFR2_OFFSET2_Pos) /*!< 0x00000008 */ -#define ADC_OFR2_OFFSET2_4 (0x010UL << ADC_OFR2_OFFSET2_Pos) /*!< 0x00000010 */ -#define ADC_OFR2_OFFSET2_5 (0x020UL << ADC_OFR2_OFFSET2_Pos) /*!< 0x00000020 */ -#define ADC_OFR2_OFFSET2_6 (0x040UL << ADC_OFR2_OFFSET2_Pos) /*!< 0x00000040 */ -#define ADC_OFR2_OFFSET2_7 (0x080UL << ADC_OFR2_OFFSET2_Pos) /*!< 0x00000080 */ -#define ADC_OFR2_OFFSET2_8 (0x100UL << ADC_OFR2_OFFSET2_Pos) /*!< 0x00000100 */ -#define ADC_OFR2_OFFSET2_9 (0x200UL << ADC_OFR2_OFFSET2_Pos) /*!< 0x00000200 */ -#define ADC_OFR2_OFFSET2_10 (0x400UL << ADC_OFR2_OFFSET2_Pos) /*!< 0x00000400 */ -#define ADC_OFR2_OFFSET2_11 (0x800UL << ADC_OFR2_OFFSET2_Pos) /*!< 0x00000800 */ - -#define ADC_OFR2_OFFSET2_CH_Pos (26U) -#define ADC_OFR2_OFFSET2_CH_Msk (0x1FUL << ADC_OFR2_OFFSET2_CH_Pos) /*!< 0x7C000000 */ -#define ADC_OFR2_OFFSET2_CH ADC_OFR2_OFFSET2_CH_Msk /*!< ADC offset number 2 channel selection */ -#define ADC_OFR2_OFFSET2_CH_0 (0x01UL << ADC_OFR2_OFFSET2_CH_Pos) /*!< 0x04000000 */ -#define ADC_OFR2_OFFSET2_CH_1 (0x02UL << ADC_OFR2_OFFSET2_CH_Pos) /*!< 0x08000000 */ -#define ADC_OFR2_OFFSET2_CH_2 (0x04UL << ADC_OFR2_OFFSET2_CH_Pos) /*!< 0x10000000 */ -#define ADC_OFR2_OFFSET2_CH_3 (0x08UL << ADC_OFR2_OFFSET2_CH_Pos) /*!< 0x20000000 */ -#define ADC_OFR2_OFFSET2_CH_4 (0x10UL << ADC_OFR2_OFFSET2_CH_Pos) /*!< 0x40000000 */ - -#define ADC_OFR2_OFFSET2_EN_Pos (31U) -#define ADC_OFR2_OFFSET2_EN_Msk (0x1UL << ADC_OFR2_OFFSET2_EN_Pos) /*!< 0x80000000 */ -#define ADC_OFR2_OFFSET2_EN ADC_OFR2_OFFSET2_EN_Msk /*!< ADC offset number 2 enable */ - -/******************** Bit definition for ADC_OFR3 register ******************/ -#define ADC_OFR3_OFFSET3_Pos (0U) -#define ADC_OFR3_OFFSET3_Msk (0xFFFUL << ADC_OFR3_OFFSET3_Pos) /*!< 0x00000FFF */ -#define ADC_OFR3_OFFSET3 ADC_OFR3_OFFSET3_Msk /*!< ADC offset number 3 offset level */ -#define ADC_OFR3_OFFSET3_0 (0x001UL << ADC_OFR3_OFFSET3_Pos) /*!< 0x00000001 */ -#define ADC_OFR3_OFFSET3_1 (0x002UL << ADC_OFR3_OFFSET3_Pos) /*!< 0x00000002 */ -#define ADC_OFR3_OFFSET3_2 (0x004UL << ADC_OFR3_OFFSET3_Pos) /*!< 0x00000004 */ -#define ADC_OFR3_OFFSET3_3 (0x008UL << ADC_OFR3_OFFSET3_Pos) /*!< 0x00000008 */ -#define ADC_OFR3_OFFSET3_4 (0x010UL << ADC_OFR3_OFFSET3_Pos) /*!< 0x00000010 */ -#define ADC_OFR3_OFFSET3_5 (0x020UL << ADC_OFR3_OFFSET3_Pos) /*!< 0x00000020 */ -#define ADC_OFR3_OFFSET3_6 (0x040UL << ADC_OFR3_OFFSET3_Pos) /*!< 0x00000040 */ -#define ADC_OFR3_OFFSET3_7 (0x080UL << ADC_OFR3_OFFSET3_Pos) /*!< 0x00000080 */ -#define ADC_OFR3_OFFSET3_8 (0x100UL << ADC_OFR3_OFFSET3_Pos) /*!< 0x00000100 */ -#define ADC_OFR3_OFFSET3_9 (0x200UL << ADC_OFR3_OFFSET3_Pos) /*!< 0x00000200 */ -#define ADC_OFR3_OFFSET3_10 (0x400UL << ADC_OFR3_OFFSET3_Pos) /*!< 0x00000400 */ -#define ADC_OFR3_OFFSET3_11 (0x800UL << ADC_OFR3_OFFSET3_Pos) /*!< 0x00000800 */ - -#define ADC_OFR3_OFFSET3_CH_Pos (26U) -#define ADC_OFR3_OFFSET3_CH_Msk (0x1FUL << ADC_OFR3_OFFSET3_CH_Pos) /*!< 0x7C000000 */ -#define ADC_OFR3_OFFSET3_CH ADC_OFR3_OFFSET3_CH_Msk /*!< ADC offset number 3 channel selection */ -#define ADC_OFR3_OFFSET3_CH_0 (0x01UL << ADC_OFR3_OFFSET3_CH_Pos) /*!< 0x04000000 */ -#define ADC_OFR3_OFFSET3_CH_1 (0x02UL << ADC_OFR3_OFFSET3_CH_Pos) /*!< 0x08000000 */ -#define ADC_OFR3_OFFSET3_CH_2 (0x04UL << ADC_OFR3_OFFSET3_CH_Pos) /*!< 0x10000000 */ -#define ADC_OFR3_OFFSET3_CH_3 (0x08UL << ADC_OFR3_OFFSET3_CH_Pos) /*!< 0x20000000 */ -#define ADC_OFR3_OFFSET3_CH_4 (0x10UL << ADC_OFR3_OFFSET3_CH_Pos) /*!< 0x40000000 */ - -#define ADC_OFR3_OFFSET3_EN_Pos (31U) -#define ADC_OFR3_OFFSET3_EN_Msk (0x1UL << ADC_OFR3_OFFSET3_EN_Pos) /*!< 0x80000000 */ -#define ADC_OFR3_OFFSET3_EN ADC_OFR3_OFFSET3_EN_Msk /*!< ADC offset number 3 enable */ - -/******************** Bit definition for ADC_OFR4 register ******************/ -#define ADC_OFR4_OFFSET4_Pos (0U) -#define ADC_OFR4_OFFSET4_Msk (0xFFFUL << ADC_OFR4_OFFSET4_Pos) /*!< 0x00000FFF */ -#define ADC_OFR4_OFFSET4 ADC_OFR4_OFFSET4_Msk /*!< ADC offset number 4 offset level */ -#define ADC_OFR4_OFFSET4_0 (0x001UL << ADC_OFR4_OFFSET4_Pos) /*!< 0x00000001 */ -#define ADC_OFR4_OFFSET4_1 (0x002UL << ADC_OFR4_OFFSET4_Pos) /*!< 0x00000002 */ -#define ADC_OFR4_OFFSET4_2 (0x004UL << ADC_OFR4_OFFSET4_Pos) /*!< 0x00000004 */ -#define ADC_OFR4_OFFSET4_3 (0x008UL << ADC_OFR4_OFFSET4_Pos) /*!< 0x00000008 */ -#define ADC_OFR4_OFFSET4_4 (0x010UL << ADC_OFR4_OFFSET4_Pos) /*!< 0x00000010 */ -#define ADC_OFR4_OFFSET4_5 (0x020UL << ADC_OFR4_OFFSET4_Pos) /*!< 0x00000020 */ -#define ADC_OFR4_OFFSET4_6 (0x040UL << ADC_OFR4_OFFSET4_Pos) /*!< 0x00000040 */ -#define ADC_OFR4_OFFSET4_7 (0x080UL << ADC_OFR4_OFFSET4_Pos) /*!< 0x00000080 */ -#define ADC_OFR4_OFFSET4_8 (0x100UL << ADC_OFR4_OFFSET4_Pos) /*!< 0x00000100 */ -#define ADC_OFR4_OFFSET4_9 (0x200UL << ADC_OFR4_OFFSET4_Pos) /*!< 0x00000200 */ -#define ADC_OFR4_OFFSET4_10 (0x400UL << ADC_OFR4_OFFSET4_Pos) /*!< 0x00000400 */ -#define ADC_OFR4_OFFSET4_11 (0x800UL << ADC_OFR4_OFFSET4_Pos) /*!< 0x00000800 */ - -#define ADC_OFR4_OFFSET4_CH_Pos (26U) -#define ADC_OFR4_OFFSET4_CH_Msk (0x1FUL << ADC_OFR4_OFFSET4_CH_Pos) /*!< 0x7C000000 */ -#define ADC_OFR4_OFFSET4_CH ADC_OFR4_OFFSET4_CH_Msk /*!< ADC offset number 4 channel selection */ -#define ADC_OFR4_OFFSET4_CH_0 (0x01UL << ADC_OFR4_OFFSET4_CH_Pos) /*!< 0x04000000 */ -#define ADC_OFR4_OFFSET4_CH_1 (0x02UL << ADC_OFR4_OFFSET4_CH_Pos) /*!< 0x08000000 */ -#define ADC_OFR4_OFFSET4_CH_2 (0x04UL << ADC_OFR4_OFFSET4_CH_Pos) /*!< 0x10000000 */ -#define ADC_OFR4_OFFSET4_CH_3 (0x08UL << ADC_OFR4_OFFSET4_CH_Pos) /*!< 0x20000000 */ -#define ADC_OFR4_OFFSET4_CH_4 (0x10UL << ADC_OFR4_OFFSET4_CH_Pos) /*!< 0x40000000 */ - -#define ADC_OFR4_OFFSET4_EN_Pos (31U) -#define ADC_OFR4_OFFSET4_EN_Msk (0x1UL << ADC_OFR4_OFFSET4_EN_Pos) /*!< 0x80000000 */ -#define ADC_OFR4_OFFSET4_EN ADC_OFR4_OFFSET4_EN_Msk /*!< ADC offset number 4 enable */ - -/******************** Bit definition for ADC_JDR1 register ******************/ -#define ADC_JDR1_JDATA_Pos (0U) -#define ADC_JDR1_JDATA_Msk (0xFFFFUL << ADC_JDR1_JDATA_Pos) /*!< 0x0000FFFF */ -#define ADC_JDR1_JDATA ADC_JDR1_JDATA_Msk /*!< ADC group injected sequencer rank 1 conversion data */ -#define ADC_JDR1_JDATA_0 (0x0001UL << ADC_JDR1_JDATA_Pos) /*!< 0x00000001 */ -#define ADC_JDR1_JDATA_1 (0x0002UL << ADC_JDR1_JDATA_Pos) /*!< 0x00000002 */ -#define ADC_JDR1_JDATA_2 (0x0004UL << ADC_JDR1_JDATA_Pos) /*!< 0x00000004 */ -#define ADC_JDR1_JDATA_3 (0x0008UL << ADC_JDR1_JDATA_Pos) /*!< 0x00000008 */ -#define ADC_JDR1_JDATA_4 (0x0010UL << ADC_JDR1_JDATA_Pos) /*!< 0x00000010 */ -#define ADC_JDR1_JDATA_5 (0x0020UL << ADC_JDR1_JDATA_Pos) /*!< 0x00000020 */ -#define ADC_JDR1_JDATA_6 (0x0040UL << ADC_JDR1_JDATA_Pos) /*!< 0x00000040 */ -#define ADC_JDR1_JDATA_7 (0x0080UL << ADC_JDR1_JDATA_Pos) /*!< 0x00000080 */ -#define ADC_JDR1_JDATA_8 (0x0100UL << ADC_JDR1_JDATA_Pos) /*!< 0x00000100 */ -#define ADC_JDR1_JDATA_9 (0x0200UL << ADC_JDR1_JDATA_Pos) /*!< 0x00000200 */ -#define ADC_JDR1_JDATA_10 (0x0400UL << ADC_JDR1_JDATA_Pos) /*!< 0x00000400 */ -#define ADC_JDR1_JDATA_11 (0x0800UL << ADC_JDR1_JDATA_Pos) /*!< 0x00000800 */ -#define ADC_JDR1_JDATA_12 (0x1000UL << ADC_JDR1_JDATA_Pos) /*!< 0x00001000 */ -#define ADC_JDR1_JDATA_13 (0x2000UL << ADC_JDR1_JDATA_Pos) /*!< 0x00002000 */ -#define ADC_JDR1_JDATA_14 (0x4000UL << ADC_JDR1_JDATA_Pos) /*!< 0x00004000 */ -#define ADC_JDR1_JDATA_15 (0x8000UL << ADC_JDR1_JDATA_Pos) /*!< 0x00008000 */ - -/******************** Bit definition for ADC_JDR2 register ******************/ -#define ADC_JDR2_JDATA_Pos (0U) -#define ADC_JDR2_JDATA_Msk (0xFFFFUL << ADC_JDR2_JDATA_Pos) /*!< 0x0000FFFF */ -#define ADC_JDR2_JDATA ADC_JDR2_JDATA_Msk /*!< ADC group injected sequencer rank 2 conversion data */ -#define ADC_JDR2_JDATA_0 (0x0001UL << ADC_JDR2_JDATA_Pos) /*!< 0x00000001 */ -#define ADC_JDR2_JDATA_1 (0x0002UL << ADC_JDR2_JDATA_Pos) /*!< 0x00000002 */ -#define ADC_JDR2_JDATA_2 (0x0004UL << ADC_JDR2_JDATA_Pos) /*!< 0x00000004 */ -#define ADC_JDR2_JDATA_3 (0x0008UL << ADC_JDR2_JDATA_Pos) /*!< 0x00000008 */ -#define ADC_JDR2_JDATA_4 (0x0010UL << ADC_JDR2_JDATA_Pos) /*!< 0x00000010 */ -#define ADC_JDR2_JDATA_5 (0x0020UL << ADC_JDR2_JDATA_Pos) /*!< 0x00000020 */ -#define ADC_JDR2_JDATA_6 (0x0040UL << ADC_JDR2_JDATA_Pos) /*!< 0x00000040 */ -#define ADC_JDR2_JDATA_7 (0x0080UL << ADC_JDR2_JDATA_Pos) /*!< 0x00000080 */ -#define ADC_JDR2_JDATA_8 (0x0100UL << ADC_JDR2_JDATA_Pos) /*!< 0x00000100 */ -#define ADC_JDR2_JDATA_9 (0x0200UL << ADC_JDR2_JDATA_Pos) /*!< 0x00000200 */ -#define ADC_JDR2_JDATA_10 (0x0400UL << ADC_JDR2_JDATA_Pos) /*!< 0x00000400 */ -#define ADC_JDR2_JDATA_11 (0x0800UL << ADC_JDR2_JDATA_Pos) /*!< 0x00000800 */ -#define ADC_JDR2_JDATA_12 (0x1000UL << ADC_JDR2_JDATA_Pos) /*!< 0x00001000 */ -#define ADC_JDR2_JDATA_13 (0x2000UL << ADC_JDR2_JDATA_Pos) /*!< 0x00002000 */ -#define ADC_JDR2_JDATA_14 (0x4000UL << ADC_JDR2_JDATA_Pos) /*!< 0x00004000 */ -#define ADC_JDR2_JDATA_15 (0x8000UL << ADC_JDR2_JDATA_Pos) /*!< 0x00008000 */ - -/******************** Bit definition for ADC_JDR3 register ******************/ -#define ADC_JDR3_JDATA_Pos (0U) -#define ADC_JDR3_JDATA_Msk (0xFFFFUL << ADC_JDR3_JDATA_Pos) /*!< 0x0000FFFF */ -#define ADC_JDR3_JDATA ADC_JDR3_JDATA_Msk /*!< ADC group injected sequencer rank 3 conversion data */ -#define ADC_JDR3_JDATA_0 (0x0001UL << ADC_JDR3_JDATA_Pos) /*!< 0x00000001 */ -#define ADC_JDR3_JDATA_1 (0x0002UL << ADC_JDR3_JDATA_Pos) /*!< 0x00000002 */ -#define ADC_JDR3_JDATA_2 (0x0004UL << ADC_JDR3_JDATA_Pos) /*!< 0x00000004 */ -#define ADC_JDR3_JDATA_3 (0x0008UL << ADC_JDR3_JDATA_Pos) /*!< 0x00000008 */ -#define ADC_JDR3_JDATA_4 (0x0010UL << ADC_JDR3_JDATA_Pos) /*!< 0x00000010 */ -#define ADC_JDR3_JDATA_5 (0x0020UL << ADC_JDR3_JDATA_Pos) /*!< 0x00000020 */ -#define ADC_JDR3_JDATA_6 (0x0040UL << ADC_JDR3_JDATA_Pos) /*!< 0x00000040 */ -#define ADC_JDR3_JDATA_7 (0x0080UL << ADC_JDR3_JDATA_Pos) /*!< 0x00000080 */ -#define ADC_JDR3_JDATA_8 (0x0100UL << ADC_JDR3_JDATA_Pos) /*!< 0x00000100 */ -#define ADC_JDR3_JDATA_9 (0x0200UL << ADC_JDR3_JDATA_Pos) /*!< 0x00000200 */ -#define ADC_JDR3_JDATA_10 (0x0400UL << ADC_JDR3_JDATA_Pos) /*!< 0x00000400 */ -#define ADC_JDR3_JDATA_11 (0x0800UL << ADC_JDR3_JDATA_Pos) /*!< 0x00000800 */ -#define ADC_JDR3_JDATA_12 (0x1000UL << ADC_JDR3_JDATA_Pos) /*!< 0x00001000 */ -#define ADC_JDR3_JDATA_13 (0x2000UL << ADC_JDR3_JDATA_Pos) /*!< 0x00002000 */ -#define ADC_JDR3_JDATA_14 (0x4000UL << ADC_JDR3_JDATA_Pos) /*!< 0x00004000 */ -#define ADC_JDR3_JDATA_15 (0x8000UL << ADC_JDR3_JDATA_Pos) /*!< 0x00008000 */ - -/******************** Bit definition for ADC_JDR4 register ******************/ -#define ADC_JDR4_JDATA_Pos (0U) -#define ADC_JDR4_JDATA_Msk (0xFFFFUL << ADC_JDR4_JDATA_Pos) /*!< 0x0000FFFF */ -#define ADC_JDR4_JDATA ADC_JDR4_JDATA_Msk /*!< ADC group injected sequencer rank 4 conversion data */ -#define ADC_JDR4_JDATA_0 (0x0001UL << ADC_JDR4_JDATA_Pos) /*!< 0x00000001 */ -#define ADC_JDR4_JDATA_1 (0x0002UL << ADC_JDR4_JDATA_Pos) /*!< 0x00000002 */ -#define ADC_JDR4_JDATA_2 (0x0004UL << ADC_JDR4_JDATA_Pos) /*!< 0x00000004 */ -#define ADC_JDR4_JDATA_3 (0x0008UL << ADC_JDR4_JDATA_Pos) /*!< 0x00000008 */ -#define ADC_JDR4_JDATA_4 (0x0010UL << ADC_JDR4_JDATA_Pos) /*!< 0x00000010 */ -#define ADC_JDR4_JDATA_5 (0x0020UL << ADC_JDR4_JDATA_Pos) /*!< 0x00000020 */ -#define ADC_JDR4_JDATA_6 (0x0040UL << ADC_JDR4_JDATA_Pos) /*!< 0x00000040 */ -#define ADC_JDR4_JDATA_7 (0x0080UL << ADC_JDR4_JDATA_Pos) /*!< 0x00000080 */ -#define ADC_JDR4_JDATA_8 (0x0100UL << ADC_JDR4_JDATA_Pos) /*!< 0x00000100 */ -#define ADC_JDR4_JDATA_9 (0x0200UL << ADC_JDR4_JDATA_Pos) /*!< 0x00000200 */ -#define ADC_JDR4_JDATA_10 (0x0400UL << ADC_JDR4_JDATA_Pos) /*!< 0x00000400 */ -#define ADC_JDR4_JDATA_11 (0x0800UL << ADC_JDR4_JDATA_Pos) /*!< 0x00000800 */ -#define ADC_JDR4_JDATA_12 (0x1000UL << ADC_JDR4_JDATA_Pos) /*!< 0x00001000 */ -#define ADC_JDR4_JDATA_13 (0x2000UL << ADC_JDR4_JDATA_Pos) /*!< 0x00002000 */ -#define ADC_JDR4_JDATA_14 (0x4000UL << ADC_JDR4_JDATA_Pos) /*!< 0x00004000 */ -#define ADC_JDR4_JDATA_15 (0x8000UL << ADC_JDR4_JDATA_Pos) /*!< 0x00008000 */ - -/******************** Bit definition for ADC_AWD2CR register ****************/ -#define ADC_AWD2CR_AWD2CH_Pos (0U) -#define ADC_AWD2CR_AWD2CH_Msk (0x7FFFFUL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x0007FFFF */ -#define ADC_AWD2CR_AWD2CH ADC_AWD2CR_AWD2CH_Msk /*!< ADC analog watchdog 2 monitored channel selection */ -#define ADC_AWD2CR_AWD2CH_0 (0x00001UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000001 */ -#define ADC_AWD2CR_AWD2CH_1 (0x00002UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000002 */ -#define ADC_AWD2CR_AWD2CH_2 (0x00004UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000004 */ -#define ADC_AWD2CR_AWD2CH_3 (0x00008UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000008 */ -#define ADC_AWD2CR_AWD2CH_4 (0x00010UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000010 */ -#define ADC_AWD2CR_AWD2CH_5 (0x00020UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000020 */ -#define ADC_AWD2CR_AWD2CH_6 (0x00040UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000040 */ -#define ADC_AWD2CR_AWD2CH_7 (0x00080UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000080 */ -#define ADC_AWD2CR_AWD2CH_8 (0x00100UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000100 */ -#define ADC_AWD2CR_AWD2CH_9 (0x00200UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000200 */ -#define ADC_AWD2CR_AWD2CH_10 (0x00400UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000400 */ -#define ADC_AWD2CR_AWD2CH_11 (0x00800UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000800 */ -#define ADC_AWD2CR_AWD2CH_12 (0x01000UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00001000 */ -#define ADC_AWD2CR_AWD2CH_13 (0x02000UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00002000 */ -#define ADC_AWD2CR_AWD2CH_14 (0x04000UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00004000 */ -#define ADC_AWD2CR_AWD2CH_15 (0x08000UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00008000 */ -#define ADC_AWD2CR_AWD2CH_16 (0x10000UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00010000 */ -#define ADC_AWD2CR_AWD2CH_17 (0x20000UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00020000 */ -#define ADC_AWD2CR_AWD2CH_18 (0x40000UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00040000 */ - -/******************** Bit definition for ADC_AWD3CR register ****************/ -#define ADC_AWD3CR_AWD3CH_Pos (0U) -#define ADC_AWD3CR_AWD3CH_Msk (0x7FFFFUL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x0007FFFF */ -#define ADC_AWD3CR_AWD3CH ADC_AWD3CR_AWD3CH_Msk /*!< ADC analog watchdog 3 monitored channel selection */ -#define ADC_AWD3CR_AWD3CH_0 (0x00001UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000001 */ -#define ADC_AWD3CR_AWD3CH_1 (0x00002UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000002 */ -#define ADC_AWD3CR_AWD3CH_2 (0x00004UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000004 */ -#define ADC_AWD3CR_AWD3CH_3 (0x00008UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000008 */ -#define ADC_AWD3CR_AWD3CH_4 (0x00010UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000010 */ -#define ADC_AWD3CR_AWD3CH_5 (0x00020UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000020 */ -#define ADC_AWD3CR_AWD3CH_6 (0x00040UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000040 */ -#define ADC_AWD3CR_AWD3CH_7 (0x00080UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000080 */ -#define ADC_AWD3CR_AWD3CH_8 (0x00100UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000100 */ -#define ADC_AWD3CR_AWD3CH_9 (0x00200UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000200 */ -#define ADC_AWD3CR_AWD3CH_10 (0x00400UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000400 */ -#define ADC_AWD3CR_AWD3CH_11 (0x00800UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000800 */ -#define ADC_AWD3CR_AWD3CH_12 (0x01000UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00001000 */ -#define ADC_AWD3CR_AWD3CH_13 (0x02000UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00002000 */ -#define ADC_AWD3CR_AWD3CH_14 (0x04000UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00004000 */ -#define ADC_AWD3CR_AWD3CH_15 (0x08000UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00008000 */ -#define ADC_AWD3CR_AWD3CH_16 (0x10000UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00010000 */ -#define ADC_AWD3CR_AWD3CH_17 (0x20000UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00020000 */ -#define ADC_AWD3CR_AWD3CH_18 (0x40000UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00040000 */ - -/******************** Bit definition for ADC_DIFSEL register ****************/ -#define ADC_DIFSEL_DIFSEL_Pos (0U) -#define ADC_DIFSEL_DIFSEL_Msk (0x7FFFFUL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x0007FFFF */ -#define ADC_DIFSEL_DIFSEL ADC_DIFSEL_DIFSEL_Msk /*!< ADC channel differential or single-ended mode */ -#define ADC_DIFSEL_DIFSEL_0 (0x00001UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00000001 */ -#define ADC_DIFSEL_DIFSEL_1 (0x00002UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00000002 */ -#define ADC_DIFSEL_DIFSEL_2 (0x00004UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00000004 */ -#define ADC_DIFSEL_DIFSEL_3 (0x00008UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00000008 */ -#define ADC_DIFSEL_DIFSEL_4 (0x00010UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00000010 */ -#define ADC_DIFSEL_DIFSEL_5 (0x00020UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00000020 */ -#define ADC_DIFSEL_DIFSEL_6 (0x00040UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00000040 */ -#define ADC_DIFSEL_DIFSEL_7 (0x00080UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00000080 */ -#define ADC_DIFSEL_DIFSEL_8 (0x00100UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00000100 */ -#define ADC_DIFSEL_DIFSEL_9 (0x00200UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00000200 */ -#define ADC_DIFSEL_DIFSEL_10 (0x00400UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00000400 */ -#define ADC_DIFSEL_DIFSEL_11 (0x00800UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00000800 */ -#define ADC_DIFSEL_DIFSEL_12 (0x01000UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00001000 */ -#define ADC_DIFSEL_DIFSEL_13 (0x02000UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00002000 */ -#define ADC_DIFSEL_DIFSEL_14 (0x04000UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00004000 */ -#define ADC_DIFSEL_DIFSEL_15 (0x08000UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00008000 */ -#define ADC_DIFSEL_DIFSEL_16 (0x10000UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00010000 */ -#define ADC_DIFSEL_DIFSEL_17 (0x20000UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00020000 */ -#define ADC_DIFSEL_DIFSEL_18 (0x40000UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00040000 */ - -/******************** Bit definition for ADC_CALFACT register ***************/ -#define ADC_CALFACT_CALFACT_S_Pos (0U) -#define ADC_CALFACT_CALFACT_S_Msk (0x7FUL << ADC_CALFACT_CALFACT_S_Pos) /*!< 0x0000007F */ -#define ADC_CALFACT_CALFACT_S ADC_CALFACT_CALFACT_S_Msk /*!< ADC calibration factor in single-ended mode */ -#define ADC_CALFACT_CALFACT_S_0 (0x01UL << ADC_CALFACT_CALFACT_S_Pos) /*!< 0x00000001 */ -#define ADC_CALFACT_CALFACT_S_1 (0x02UL << ADC_CALFACT_CALFACT_S_Pos) /*!< 0x00000002 */ -#define ADC_CALFACT_CALFACT_S_2 (0x04UL << ADC_CALFACT_CALFACT_S_Pos) /*!< 0x00000004 */ -#define ADC_CALFACT_CALFACT_S_3 (0x08UL << ADC_CALFACT_CALFACT_S_Pos) /*!< 0x00000008 */ -#define ADC_CALFACT_CALFACT_S_4 (0x10UL << ADC_CALFACT_CALFACT_S_Pos) /*!< 0x00000010 */ -#define ADC_CALFACT_CALFACT_S_5 (0x20UL << ADC_CALFACT_CALFACT_S_Pos) /*!< 0x00000020 */ -#define ADC_CALFACT_CALFACT_S_6 (0x40UL << ADC_CALFACT_CALFACT_S_Pos) /*!< 0x00000040 */ - -#define ADC_CALFACT_CALFACT_D_Pos (16U) -#define ADC_CALFACT_CALFACT_D_Msk (0x7FUL << ADC_CALFACT_CALFACT_D_Pos) /*!< 0x007F0000 */ -#define ADC_CALFACT_CALFACT_D ADC_CALFACT_CALFACT_D_Msk /*!< ADC calibration factor in differential mode */ -#define ADC_CALFACT_CALFACT_D_0 (0x01UL << ADC_CALFACT_CALFACT_D_Pos) /*!< 0x00010000 */ -#define ADC_CALFACT_CALFACT_D_1 (0x02UL << ADC_CALFACT_CALFACT_D_Pos) /*!< 0x00020000 */ -#define ADC_CALFACT_CALFACT_D_2 (0x04UL << ADC_CALFACT_CALFACT_D_Pos) /*!< 0x00040000 */ -#define ADC_CALFACT_CALFACT_D_3 (0x08UL << ADC_CALFACT_CALFACT_D_Pos) /*!< 0x00080000 */ -#define ADC_CALFACT_CALFACT_D_4 (0x10UL << ADC_CALFACT_CALFACT_D_Pos) /*!< 0x00100000 */ -#define ADC_CALFACT_CALFACT_D_5 (0x20UL << ADC_CALFACT_CALFACT_D_Pos) /*!< 0x00200000 */ -#define ADC_CALFACT_CALFACT_D_6 (0x40UL << ADC_CALFACT_CALFACT_D_Pos) /*!< 0x00400000 */ - -/************************* ADC Common registers *****************************/ -/******************** Bit definition for ADC_CSR register *******************/ -#define ADC_CSR_ADRDY_MST_Pos (0U) -#define ADC_CSR_ADRDY_MST_Msk (0x1UL << ADC_CSR_ADRDY_MST_Pos) /*!< 0x00000001 */ -#define ADC_CSR_ADRDY_MST ADC_CSR_ADRDY_MST_Msk /*!< ADC multimode master ready flag */ -#define ADC_CSR_EOSMP_MST_Pos (1U) -#define ADC_CSR_EOSMP_MST_Msk (0x1UL << ADC_CSR_EOSMP_MST_Pos) /*!< 0x00000002 */ -#define ADC_CSR_EOSMP_MST ADC_CSR_EOSMP_MST_Msk /*!< ADC multimode master group regular end of sampling flag */ -#define ADC_CSR_EOC_MST_Pos (2U) -#define ADC_CSR_EOC_MST_Msk (0x1UL << ADC_CSR_EOC_MST_Pos) /*!< 0x00000004 */ -#define ADC_CSR_EOC_MST ADC_CSR_EOC_MST_Msk /*!< ADC multimode master group regular end of unitary conversion flag */ -#define ADC_CSR_EOS_MST_Pos (3U) -#define ADC_CSR_EOS_MST_Msk (0x1UL << ADC_CSR_EOS_MST_Pos) /*!< 0x00000008 */ -#define ADC_CSR_EOS_MST ADC_CSR_EOS_MST_Msk /*!< ADC multimode master group regular end of sequence conversions flag */ -#define ADC_CSR_OVR_MST_Pos (4U) -#define ADC_CSR_OVR_MST_Msk (0x1UL << ADC_CSR_OVR_MST_Pos) /*!< 0x00000010 */ -#define ADC_CSR_OVR_MST ADC_CSR_OVR_MST_Msk /*!< ADC multimode master group regular overrun flag */ -#define ADC_CSR_JEOC_MST_Pos (5U) -#define ADC_CSR_JEOC_MST_Msk (0x1UL << ADC_CSR_JEOC_MST_Pos) /*!< 0x00000020 */ -#define ADC_CSR_JEOC_MST ADC_CSR_JEOC_MST_Msk /*!< ADC multimode master group injected end of unitary conversion flag */ -#define ADC_CSR_JEOS_MST_Pos (6U) -#define ADC_CSR_JEOS_MST_Msk (0x1UL << ADC_CSR_JEOS_MST_Pos) /*!< 0x00000040 */ -#define ADC_CSR_JEOS_MST ADC_CSR_JEOS_MST_Msk /*!< ADC multimode master group injected end of sequence conversions flag */ -#define ADC_CSR_AWD1_MST_Pos (7U) -#define ADC_CSR_AWD1_MST_Msk (0x1UL << ADC_CSR_AWD1_MST_Pos) /*!< 0x00000080 */ -#define ADC_CSR_AWD1_MST ADC_CSR_AWD1_MST_Msk /*!< ADC multimode master analog watchdog 1 flag */ -#define ADC_CSR_AWD2_MST_Pos (8U) -#define ADC_CSR_AWD2_MST_Msk (0x1UL << ADC_CSR_AWD2_MST_Pos) /*!< 0x00000100 */ -#define ADC_CSR_AWD2_MST ADC_CSR_AWD2_MST_Msk /*!< ADC multimode master analog watchdog 2 flag */ -#define ADC_CSR_AWD3_MST_Pos (9U) -#define ADC_CSR_AWD3_MST_Msk (0x1UL << ADC_CSR_AWD3_MST_Pos) /*!< 0x00000200 */ -#define ADC_CSR_AWD3_MST ADC_CSR_AWD3_MST_Msk /*!< ADC multimode master analog watchdog 3 flag */ -#define ADC_CSR_JQOVF_MST_Pos (10U) -#define ADC_CSR_JQOVF_MST_Msk (0x1UL << ADC_CSR_JQOVF_MST_Pos) /*!< 0x00000400 */ -#define ADC_CSR_JQOVF_MST ADC_CSR_JQOVF_MST_Msk /*!< ADC multimode master group injected contexts queue overflow flag */ - -#define ADC_CSR_ADRDY_SLV_Pos (16U) -#define ADC_CSR_ADRDY_SLV_Msk (0x1UL << ADC_CSR_ADRDY_SLV_Pos) /*!< 0x00010000 */ -#define ADC_CSR_ADRDY_SLV ADC_CSR_ADRDY_SLV_Msk /*!< ADC multimode slave ready flag */ -#define ADC_CSR_EOSMP_SLV_Pos (17U) -#define ADC_CSR_EOSMP_SLV_Msk (0x1UL << ADC_CSR_EOSMP_SLV_Pos) /*!< 0x00020000 */ -#define ADC_CSR_EOSMP_SLV ADC_CSR_EOSMP_SLV_Msk /*!< ADC multimode slave group regular end of sampling flag */ -#define ADC_CSR_EOC_SLV_Pos (18U) -#define ADC_CSR_EOC_SLV_Msk (0x1UL << ADC_CSR_EOC_SLV_Pos) /*!< 0x00040000 */ -#define ADC_CSR_EOC_SLV ADC_CSR_EOC_SLV_Msk /*!< ADC multimode slave group regular end of unitary conversion flag */ -#define ADC_CSR_EOS_SLV_Pos (19U) -#define ADC_CSR_EOS_SLV_Msk (0x1UL << ADC_CSR_EOS_SLV_Pos) /*!< 0x00080000 */ -#define ADC_CSR_EOS_SLV ADC_CSR_EOS_SLV_Msk /*!< ADC multimode slave group regular end of sequence conversions flag */ -#define ADC_CSR_OVR_SLV_Pos (20U) -#define ADC_CSR_OVR_SLV_Msk (0x1UL << ADC_CSR_OVR_SLV_Pos) /*!< 0x00100000 */ -#define ADC_CSR_OVR_SLV ADC_CSR_OVR_SLV_Msk /*!< ADC multimode slave group regular overrun flag */ -#define ADC_CSR_JEOC_SLV_Pos (21U) -#define ADC_CSR_JEOC_SLV_Msk (0x1UL << ADC_CSR_JEOC_SLV_Pos) /*!< 0x00200000 */ -#define ADC_CSR_JEOC_SLV ADC_CSR_JEOC_SLV_Msk /*!< ADC multimode slave group injected end of unitary conversion flag */ -#define ADC_CSR_JEOS_SLV_Pos (22U) -#define ADC_CSR_JEOS_SLV_Msk (0x1UL << ADC_CSR_JEOS_SLV_Pos) /*!< 0x00400000 */ -#define ADC_CSR_JEOS_SLV ADC_CSR_JEOS_SLV_Msk /*!< ADC multimode slave group injected end of sequence conversions flag */ -#define ADC_CSR_AWD1_SLV_Pos (23U) -#define ADC_CSR_AWD1_SLV_Msk (0x1UL << ADC_CSR_AWD1_SLV_Pos) /*!< 0x00800000 */ -#define ADC_CSR_AWD1_SLV ADC_CSR_AWD1_SLV_Msk /*!< ADC multimode slave analog watchdog 1 flag */ -#define ADC_CSR_AWD2_SLV_Pos (24U) -#define ADC_CSR_AWD2_SLV_Msk (0x1UL << ADC_CSR_AWD2_SLV_Pos) /*!< 0x01000000 */ -#define ADC_CSR_AWD2_SLV ADC_CSR_AWD2_SLV_Msk /*!< ADC multimode slave analog watchdog 2 flag */ -#define ADC_CSR_AWD3_SLV_Pos (25U) -#define ADC_CSR_AWD3_SLV_Msk (0x1UL << ADC_CSR_AWD3_SLV_Pos) /*!< 0x02000000 */ -#define ADC_CSR_AWD3_SLV ADC_CSR_AWD3_SLV_Msk /*!< ADC multimode slave analog watchdog 3 flag */ -#define ADC_CSR_JQOVF_SLV_Pos (26U) -#define ADC_CSR_JQOVF_SLV_Msk (0x1UL << ADC_CSR_JQOVF_SLV_Pos) /*!< 0x04000000 */ -#define ADC_CSR_JQOVF_SLV ADC_CSR_JQOVF_SLV_Msk /*!< ADC multimode slave group injected contexts queue overflow flag */ - -/******************** Bit definition for ADC_CCR register *******************/ -#define ADC_CCR_DUAL_Pos (0U) -#define ADC_CCR_DUAL_Msk (0x1FUL << ADC_CCR_DUAL_Pos) /*!< 0x0000001F */ -#define ADC_CCR_DUAL ADC_CCR_DUAL_Msk /*!< ADC multimode mode selection */ -#define ADC_CCR_DUAL_0 (0x01UL << ADC_CCR_DUAL_Pos) /*!< 0x00000001 */ -#define ADC_CCR_DUAL_1 (0x02UL << ADC_CCR_DUAL_Pos) /*!< 0x00000002 */ -#define ADC_CCR_DUAL_2 (0x04UL << ADC_CCR_DUAL_Pos) /*!< 0x00000004 */ -#define ADC_CCR_DUAL_3 (0x08UL << ADC_CCR_DUAL_Pos) /*!< 0x00000008 */ -#define ADC_CCR_DUAL_4 (0x10UL << ADC_CCR_DUAL_Pos) /*!< 0x00000010 */ - -#define ADC_CCR_DELAY_Pos (8U) -#define ADC_CCR_DELAY_Msk (0xFUL << ADC_CCR_DELAY_Pos) /*!< 0x00000F00 */ -#define ADC_CCR_DELAY ADC_CCR_DELAY_Msk /*!< ADC multimode delay between 2 sampling phases */ -#define ADC_CCR_DELAY_0 (0x1UL << ADC_CCR_DELAY_Pos) /*!< 0x00000100 */ -#define ADC_CCR_DELAY_1 (0x2UL << ADC_CCR_DELAY_Pos) /*!< 0x00000200 */ -#define ADC_CCR_DELAY_2 (0x4UL << ADC_CCR_DELAY_Pos) /*!< 0x00000400 */ -#define ADC_CCR_DELAY_3 (0x8UL << ADC_CCR_DELAY_Pos) /*!< 0x00000800 */ - -#define ADC_CCR_DMACFG_Pos (13U) -#define ADC_CCR_DMACFG_Msk (0x1UL << ADC_CCR_DMACFG_Pos) /*!< 0x00002000 */ -#define ADC_CCR_DMACFG ADC_CCR_DMACFG_Msk /*!< ADC multimode DMA transfer configuration */ - -#define ADC_CCR_MDMA_Pos (14U) -#define ADC_CCR_MDMA_Msk (0x3UL << ADC_CCR_MDMA_Pos) /*!< 0x0000C000 */ -#define ADC_CCR_MDMA ADC_CCR_MDMA_Msk /*!< ADC multimode DMA transfer enable */ -#define ADC_CCR_MDMA_0 (0x1UL << ADC_CCR_MDMA_Pos) /*!< 0x00004000 */ -#define ADC_CCR_MDMA_1 (0x2UL << ADC_CCR_MDMA_Pos) /*!< 0x00008000 */ - -#define ADC_CCR_CKMODE_Pos (16U) -#define ADC_CCR_CKMODE_Msk (0x3UL << ADC_CCR_CKMODE_Pos) /*!< 0x00030000 */ -#define ADC_CCR_CKMODE ADC_CCR_CKMODE_Msk /*!< ADC common clock source and prescaler (prescaler only for clock source synchronous) */ -#define ADC_CCR_CKMODE_0 (0x1UL << ADC_CCR_CKMODE_Pos) /*!< 0x00010000 */ -#define ADC_CCR_CKMODE_1 (0x2UL << ADC_CCR_CKMODE_Pos) /*!< 0x00020000 */ - -#define ADC_CCR_PRESC_Pos (18U) -#define ADC_CCR_PRESC_Msk (0xFUL << ADC_CCR_PRESC_Pos) /*!< 0x003C0000 */ -#define ADC_CCR_PRESC ADC_CCR_PRESC_Msk /*!< ADC common clock prescaler, only for clock source asynchronous */ -#define ADC_CCR_PRESC_0 (0x1UL << ADC_CCR_PRESC_Pos) /*!< 0x00040000 */ -#define ADC_CCR_PRESC_1 (0x2UL << ADC_CCR_PRESC_Pos) /*!< 0x00080000 */ -#define ADC_CCR_PRESC_2 (0x4UL << ADC_CCR_PRESC_Pos) /*!< 0x00100000 */ -#define ADC_CCR_PRESC_3 (0x8UL << ADC_CCR_PRESC_Pos) /*!< 0x00200000 */ - -#define ADC_CCR_VREFEN_Pos (22U) -#define ADC_CCR_VREFEN_Msk (0x1UL << ADC_CCR_VREFEN_Pos) /*!< 0x00400000 */ -#define ADC_CCR_VREFEN ADC_CCR_VREFEN_Msk /*!< ADC internal path to VrefInt enable */ -#define ADC_CCR_TSEN_Pos (23U) -#define ADC_CCR_TSEN_Msk (0x1UL << ADC_CCR_TSEN_Pos) /*!< 0x00800000 */ -#define ADC_CCR_TSEN ADC_CCR_TSEN_Msk /*!< ADC internal path to temperature sensor enable */ -#define ADC_CCR_VBATEN_Pos (24U) -#define ADC_CCR_VBATEN_Msk (0x1UL << ADC_CCR_VBATEN_Pos) /*!< 0x01000000 */ -#define ADC_CCR_VBATEN ADC_CCR_VBATEN_Msk /*!< ADC internal path to battery voltage enable */ - -/******************** Bit definition for ADC_CDR register *******************/ -#define ADC_CDR_RDATA_MST_Pos (0U) -#define ADC_CDR_RDATA_MST_Msk (0xFFFFUL << ADC_CDR_RDATA_MST_Pos) /*!< 0x0000FFFF */ -#define ADC_CDR_RDATA_MST ADC_CDR_RDATA_MST_Msk /*!< ADC multimode master group regular conversion data */ -#define ADC_CDR_RDATA_MST_0 (0x0001UL << ADC_CDR_RDATA_MST_Pos) /*!< 0x00000001 */ -#define ADC_CDR_RDATA_MST_1 (0x0002UL << ADC_CDR_RDATA_MST_Pos) /*!< 0x00000002 */ -#define ADC_CDR_RDATA_MST_2 (0x0004UL << ADC_CDR_RDATA_MST_Pos) /*!< 0x00000004 */ -#define ADC_CDR_RDATA_MST_3 (0x0008UL << ADC_CDR_RDATA_MST_Pos) /*!< 0x00000008 */ -#define ADC_CDR_RDATA_MST_4 (0x0010UL << ADC_CDR_RDATA_MST_Pos) /*!< 0x00000010 */ -#define ADC_CDR_RDATA_MST_5 (0x0020UL << ADC_CDR_RDATA_MST_Pos) /*!< 0x00000020 */ -#define ADC_CDR_RDATA_MST_6 (0x0040UL << ADC_CDR_RDATA_MST_Pos) /*!< 0x00000040 */ -#define ADC_CDR_RDATA_MST_7 (0x0080UL << ADC_CDR_RDATA_MST_Pos) /*!< 0x00000080 */ -#define ADC_CDR_RDATA_MST_8 (0x0100UL << ADC_CDR_RDATA_MST_Pos) /*!< 0x00000100 */ -#define ADC_CDR_RDATA_MST_9 (0x0200UL << ADC_CDR_RDATA_MST_Pos) /*!< 0x00000200 */ -#define ADC_CDR_RDATA_MST_10 (0x0400UL << ADC_CDR_RDATA_MST_Pos) /*!< 0x00000400 */ -#define ADC_CDR_RDATA_MST_11 (0x0800UL << ADC_CDR_RDATA_MST_Pos) /*!< 0x00000800 */ -#define ADC_CDR_RDATA_MST_12 (0x1000UL << ADC_CDR_RDATA_MST_Pos) /*!< 0x00001000 */ -#define ADC_CDR_RDATA_MST_13 (0x2000UL << ADC_CDR_RDATA_MST_Pos) /*!< 0x00002000 */ -#define ADC_CDR_RDATA_MST_14 (0x4000UL << ADC_CDR_RDATA_MST_Pos) /*!< 0x00004000 */ -#define ADC_CDR_RDATA_MST_15 (0x8000UL << ADC_CDR_RDATA_MST_Pos) /*!< 0x00008000 */ - -#define ADC_CDR_RDATA_SLV_Pos (16U) -#define ADC_CDR_RDATA_SLV_Msk (0xFFFFUL << ADC_CDR_RDATA_SLV_Pos) /*!< 0xFFFF0000 */ -#define ADC_CDR_RDATA_SLV ADC_CDR_RDATA_SLV_Msk /*!< ADC multimode slave group regular conversion data */ -#define ADC_CDR_RDATA_SLV_0 (0x0001UL << ADC_CDR_RDATA_SLV_Pos) /*!< 0x00010000 */ -#define ADC_CDR_RDATA_SLV_1 (0x0002UL << ADC_CDR_RDATA_SLV_Pos) /*!< 0x00020000 */ -#define ADC_CDR_RDATA_SLV_2 (0x0004UL << ADC_CDR_RDATA_SLV_Pos) /*!< 0x00040000 */ -#define ADC_CDR_RDATA_SLV_3 (0x0008UL << ADC_CDR_RDATA_SLV_Pos) /*!< 0x00080000 */ -#define ADC_CDR_RDATA_SLV_4 (0x0010UL << ADC_CDR_RDATA_SLV_Pos) /*!< 0x00100000 */ -#define ADC_CDR_RDATA_SLV_5 (0x0020UL << ADC_CDR_RDATA_SLV_Pos) /*!< 0x00200000 */ -#define ADC_CDR_RDATA_SLV_6 (0x0040UL << ADC_CDR_RDATA_SLV_Pos) /*!< 0x00400000 */ -#define ADC_CDR_RDATA_SLV_7 (0x0080UL << ADC_CDR_RDATA_SLV_Pos) /*!< 0x00800000 */ -#define ADC_CDR_RDATA_SLV_8 (0x0100UL << ADC_CDR_RDATA_SLV_Pos) /*!< 0x01000000 */ -#define ADC_CDR_RDATA_SLV_9 (0x0200UL << ADC_CDR_RDATA_SLV_Pos) /*!< 0x02000000 */ -#define ADC_CDR_RDATA_SLV_10 (0x0400UL << ADC_CDR_RDATA_SLV_Pos) /*!< 0x04000000 */ -#define ADC_CDR_RDATA_SLV_11 (0x0800UL << ADC_CDR_RDATA_SLV_Pos) /*!< 0x08000000 */ -#define ADC_CDR_RDATA_SLV_12 (0x1000UL << ADC_CDR_RDATA_SLV_Pos) /*!< 0x10000000 */ -#define ADC_CDR_RDATA_SLV_13 (0x2000UL << ADC_CDR_RDATA_SLV_Pos) /*!< 0x20000000 */ -#define ADC_CDR_RDATA_SLV_14 (0x4000UL << ADC_CDR_RDATA_SLV_Pos) /*!< 0x40000000 */ -#define ADC_CDR_RDATA_SLV_15 (0x8000UL << ADC_CDR_RDATA_SLV_Pos) /*!< 0x80000000 */ - -/******************************************************************************/ -/* */ -/* Controller Area Network */ -/* */ -/******************************************************************************/ -/*!*/ -#define DAC_CR_CEN1_Pos (14U) -#define DAC_CR_CEN1_Msk (0x1UL << DAC_CR_CEN1_Pos) /*!< 0x00004000 */ -#define DAC_CR_CEN1 DAC_CR_CEN1_Msk /*!*/ - -#define DAC_CR_EN2_Pos (16U) -#define DAC_CR_EN2_Msk (0x1UL << DAC_CR_EN2_Pos) /*!< 0x00010000 */ -#define DAC_CR_EN2 DAC_CR_EN2_Msk /*!*/ -#define DAC_CR_CEN2_Pos (30U) -#define DAC_CR_CEN2_Msk (0x1UL << DAC_CR_CEN2_Pos) /*!< 0x40000000 */ -#define DAC_CR_CEN2 DAC_CR_CEN2_Msk /*!*/ - -/***************** Bit definition for DAC_SWTRIGR register ******************/ -#define DAC_SWTRIGR_SWTRIG1_Pos (0U) -#define DAC_SWTRIGR_SWTRIG1_Msk (0x1UL << DAC_SWTRIGR_SWTRIG1_Pos) /*!< 0x00000001 */ -#define DAC_SWTRIGR_SWTRIG1 DAC_SWTRIGR_SWTRIG1_Msk /*! + +/** @addtogroup Peripheral_registers_structures + * @{ + */ + +/** + * @brief Analog to Digital Converter + */ + +typedef struct +{ + __IO uint32_t ISR; /*!< ADC interrupt and status register, Address offset: 0x00 */ + __IO uint32_t IER; /*!< ADC interrupt enable register, Address offset: 0x04 */ + __IO uint32_t CR; /*!< ADC control register, Address offset: 0x08 */ + __IO uint32_t CFGR; /*!< ADC configuration register 1, Address offset: 0x0C */ + __IO uint32_t CFGR2; /*!< ADC configuration register 2, Address offset: 0x10 */ + __IO uint32_t SMPR1; /*!< ADC sampling time register 1, Address offset: 0x14 */ + __IO uint32_t SMPR2; /*!< ADC sampling time register 2, Address offset: 0x18 */ + uint32_t RESERVED1; /*!< Reserved, 0x1C */ + __IO uint32_t TR1; /*!< ADC analog watchdog 1 threshold register, Address offset: 0x20 */ + __IO uint32_t TR2; /*!< ADC analog watchdog 2 threshold register, Address offset: 0x24 */ + __IO uint32_t TR3; /*!< ADC analog watchdog 3 threshold register, Address offset: 0x28 */ + uint32_t RESERVED2; /*!< Reserved, 0x2C */ + __IO uint32_t SQR1; /*!< ADC group regular sequencer register 1, Address offset: 0x30 */ + __IO uint32_t SQR2; /*!< ADC group regular sequencer register 2, Address offset: 0x34 */ + __IO uint32_t SQR3; /*!< ADC group regular sequencer register 3, Address offset: 0x38 */ + __IO uint32_t SQR4; /*!< ADC group regular sequencer register 4, Address offset: 0x3C */ + __IO uint32_t DR; /*!< ADC group regular data register, Address offset: 0x40 */ + uint32_t RESERVED3; /*!< Reserved, 0x44 */ + uint32_t RESERVED4; /*!< Reserved, 0x48 */ + __IO uint32_t JSQR; /*!< ADC group injected sequencer register, Address offset: 0x4C */ + uint32_t RESERVED5[4]; /*!< Reserved, 0x50 - 0x5C */ + __IO uint32_t OFR1; /*!< ADC offset register 1, Address offset: 0x60 */ + __IO uint32_t OFR2; /*!< ADC offset register 2, Address offset: 0x64 */ + __IO uint32_t OFR3; /*!< ADC offset register 3, Address offset: 0x68 */ + __IO uint32_t OFR4; /*!< ADC offset register 4, Address offset: 0x6C */ + uint32_t RESERVED6[4]; /*!< Reserved, 0x70 - 0x7C */ + __IO uint32_t JDR1; /*!< ADC group injected rank 1 data register, Address offset: 0x80 */ + __IO uint32_t JDR2; /*!< ADC group injected rank 2 data register, Address offset: 0x84 */ + __IO uint32_t JDR3; /*!< ADC group injected rank 3 data register, Address offset: 0x88 */ + __IO uint32_t JDR4; /*!< ADC group injected rank 4 data register, Address offset: 0x8C */ + uint32_t RESERVED7[4]; /*!< Reserved, 0x090 - 0x09C */ + __IO uint32_t AWD2CR; /*!< ADC analog watchdog 1 configuration register, Address offset: 0xA0 */ + __IO uint32_t AWD3CR; /*!< ADC analog watchdog 3 Configuration Register, Address offset: 0xA4 */ + uint32_t RESERVED8; /*!< Reserved, 0x0A8 */ + uint32_t RESERVED9; /*!< Reserved, 0x0AC */ + __IO uint32_t DIFSEL; /*!< ADC differential mode selection register, Address offset: 0xB0 */ + __IO uint32_t CALFACT; /*!< ADC calibration factors, Address offset: 0xB4 */ + +} ADC_TypeDef; + +typedef struct +{ + __IO uint32_t CSR; /*!< ADC common status register, Address offset: ADC1 base address + 0x300 */ + uint32_t RESERVED; /*!< Reserved, Address offset: ADC1 base address + 0x304 */ + __IO uint32_t CCR; /*!< ADC common configuration register, Address offset: ADC1 base address + 0x308 */ + __IO uint32_t CDR; /*!< ADC common group regular data register Address offset: ADC1 base address + 0x30C */ +} ADC_Common_TypeDef; + +/** + * @brief DCMI + */ + +typedef struct +{ + __IO uint32_t CR; /*!< DCMI control register, Address offset: 0x00 */ + __IO uint32_t SR; /*!< DCMI status register, Address offset: 0x04 */ + __IO uint32_t RISR; /*!< DCMI raw interrupt status register, Address offset: 0x08 */ + __IO uint32_t IER; /*!< DCMI interrupt enable register, Address offset: 0x0C */ + __IO uint32_t MISR; /*!< DCMI masked interrupt status register, Address offset: 0x10 */ + __IO uint32_t ICR; /*!< DCMI interrupt clear register, Address offset: 0x14 */ + __IO uint32_t ESCR; /*!< DCMI embedded synchronization code register, Address offset: 0x18 */ + __IO uint32_t ESUR; /*!< DCMI embedded synchronization unmask register, Address offset: 0x1C */ + __IO uint32_t CWSTRTR; /*!< DCMI crop window start, Address offset: 0x20 */ + __IO uint32_t CWSIZER; /*!< DCMI crop window size, Address offset: 0x24 */ + __IO uint32_t DR; /*!< DCMI data register, Address offset: 0x28 */ +} DCMI_TypeDef; + +/** + * @brief Controller Area Network TxMailBox + */ + +typedef struct +{ + __IO uint32_t TIR; /*!< CAN TX mailbox identifier register */ + __IO uint32_t TDTR; /*!< CAN mailbox data length control and time stamp register */ + __IO uint32_t TDLR; /*!< CAN mailbox data low register */ + __IO uint32_t TDHR; /*!< CAN mailbox data high register */ +} CAN_TxMailBox_TypeDef; + +/** + * @brief Controller Area Network FIFOMailBox + */ + +typedef struct +{ + __IO uint32_t RIR; /*!< CAN receive FIFO mailbox identifier register */ + __IO uint32_t RDTR; /*!< CAN receive FIFO mailbox data length control and time stamp register */ + __IO uint32_t RDLR; /*!< CAN receive FIFO mailbox data low register */ + __IO uint32_t RDHR; /*!< CAN receive FIFO mailbox data high register */ +} CAN_FIFOMailBox_TypeDef; + +/** + * @brief Controller Area Network FilterRegister + */ + +typedef struct +{ + __IO uint32_t FR1; /*!< CAN Filter bank register 1 */ + __IO uint32_t FR2; /*!< CAN Filter bank register 1 */ +} CAN_FilterRegister_TypeDef; + +/** + * @brief Controller Area Network + */ + +typedef struct +{ + __IO uint32_t MCR; /*!< CAN master control register, Address offset: 0x00 */ + __IO uint32_t MSR; /*!< CAN master status register, Address offset: 0x04 */ + __IO uint32_t TSR; /*!< CAN transmit status register, Address offset: 0x08 */ + __IO uint32_t RF0R; /*!< CAN receive FIFO 0 register, Address offset: 0x0C */ + __IO uint32_t RF1R; /*!< CAN receive FIFO 1 register, Address offset: 0x10 */ + __IO uint32_t IER; /*!< CAN interrupt enable register, Address offset: 0x14 */ + __IO uint32_t ESR; /*!< CAN error status register, Address offset: 0x18 */ + __IO uint32_t BTR; /*!< CAN bit timing register, Address offset: 0x1C */ + uint32_t RESERVED0[88]; /*!< Reserved, 0x020 - 0x17F */ + CAN_TxMailBox_TypeDef sTxMailBox[3]; /*!< CAN Tx MailBox, Address offset: 0x180 - 0x1AC */ + CAN_FIFOMailBox_TypeDef sFIFOMailBox[2]; /*!< CAN FIFO MailBox, Address offset: 0x1B0 - 0x1CC */ + uint32_t RESERVED1[12]; /*!< Reserved, 0x1D0 - 0x1FF */ + __IO uint32_t FMR; /*!< CAN filter master register, Address offset: 0x200 */ + __IO uint32_t FM1R; /*!< CAN filter mode register, Address offset: 0x204 */ + uint32_t RESERVED2; /*!< Reserved, 0x208 */ + __IO uint32_t FS1R; /*!< CAN filter scale register, Address offset: 0x20C */ + uint32_t RESERVED3; /*!< Reserved, 0x210 */ + __IO uint32_t FFA1R; /*!< CAN filter FIFO assignment register, Address offset: 0x214 */ + uint32_t RESERVED4; /*!< Reserved, 0x218 */ + __IO uint32_t FA1R; /*!< CAN filter activation register, Address offset: 0x21C */ + uint32_t RESERVED5[8]; /*!< Reserved, 0x220-0x23F */ + CAN_FilterRegister_TypeDef sFilterRegister[28]; /*!< CAN Filter Register, Address offset: 0x240-0x31C */ +} CAN_TypeDef; + + +/** + * @brief Comparator + */ + +typedef struct +{ + __IO uint32_t CSR; /*!< COMP control and status register, Address offset: 0x00 */ +} COMP_TypeDef; + +typedef struct +{ + __IO uint32_t CSR; /*!< COMP control and status register, used for bits common to several COMP instances, Address offset: 0x00 */ +} COMP_Common_TypeDef; + +/** + * @brief CRC calculation unit + */ + +typedef struct +{ + __IO uint32_t DR; /*!< CRC Data register, Address offset: 0x00 */ + __IO uint8_t IDR; /*!< CRC Independent data register, Address offset: 0x04 */ + uint8_t RESERVED0; /*!< Reserved, 0x05 */ + uint16_t RESERVED1; /*!< Reserved, 0x06 */ + __IO uint32_t CR; /*!< CRC Control register, Address offset: 0x08 */ + uint32_t RESERVED2; /*!< Reserved, 0x0C */ + __IO uint32_t INIT; /*!< Initial CRC value register, Address offset: 0x10 */ + __IO uint32_t POL; /*!< CRC polynomial register, Address offset: 0x14 */ +} CRC_TypeDef; + +/** + * @brief Clock Recovery System + */ +typedef struct +{ +__IO uint32_t CR; /*!< CRS ccontrol register, Address offset: 0x00 */ +__IO uint32_t CFGR; /*!< CRS configuration register, Address offset: 0x04 */ +__IO uint32_t ISR; /*!< CRS interrupt and status register, Address offset: 0x08 */ +__IO uint32_t ICR; /*!< CRS interrupt flag clear register, Address offset: 0x0C */ +} CRS_TypeDef; + +/** + * @brief Digital to Analog Converter + */ + +typedef struct +{ + __IO uint32_t CR; /*!< DAC control register, Address offset: 0x00 */ + __IO uint32_t SWTRIGR; /*!< DAC software trigger register, Address offset: 0x04 */ + __IO uint32_t DHR12R1; /*!< DAC channel1 12-bit right-aligned data holding register, Address offset: 0x08 */ + __IO uint32_t DHR12L1; /*!< DAC channel1 12-bit left aligned data holding register, Address offset: 0x0C */ + __IO uint32_t DHR8R1; /*!< DAC channel1 8-bit right aligned data holding register, Address offset: 0x10 */ + __IO uint32_t DHR12R2; /*!< DAC channel2 12-bit right aligned data holding register, Address offset: 0x14 */ + __IO uint32_t DHR12L2; /*!< DAC channel2 12-bit left aligned data holding register, Address offset: 0x18 */ + __IO uint32_t DHR8R2; /*!< DAC channel2 8-bit right-aligned data holding register, Address offset: 0x1C */ + __IO uint32_t DHR12RD; /*!< Dual DAC 12-bit right-aligned data holding register, Address offset: 0x20 */ + __IO uint32_t DHR12LD; /*!< DUAL DAC 12-bit left aligned data holding register, Address offset: 0x24 */ + __IO uint32_t DHR8RD; /*!< DUAL DAC 8-bit right aligned data holding register, Address offset: 0x28 */ + __IO uint32_t DOR1; /*!< DAC channel1 data output register, Address offset: 0x2C */ + __IO uint32_t DOR2; /*!< DAC channel2 data output register, Address offset: 0x30 */ + __IO uint32_t SR; /*!< DAC status register, Address offset: 0x34 */ + __IO uint32_t CCR; /*!< DAC calibration control register, Address offset: 0x38 */ + __IO uint32_t MCR; /*!< DAC mode control register, Address offset: 0x3C */ + __IO uint32_t SHSR1; /*!< DAC Sample and Hold sample time register 1, Address offset: 0x40 */ + __IO uint32_t SHSR2; /*!< DAC Sample and Hold sample time register 2, Address offset: 0x44 */ + __IO uint32_t SHHR; /*!< DAC Sample and Hold hold time register, Address offset: 0x48 */ + __IO uint32_t SHRR; /*!< DAC Sample and Hold refresh time register, Address offset: 0x4C */ +} DAC_TypeDef; + +/** + * @brief DFSDM module registers + */ +typedef struct +{ + __IO uint32_t FLTCR1; /*!< DFSDM control register1, Address offset: 0x100 */ + __IO uint32_t FLTCR2; /*!< DFSDM control register2, Address offset: 0x104 */ + __IO uint32_t FLTISR; /*!< DFSDM interrupt and status register, Address offset: 0x108 */ + __IO uint32_t FLTICR; /*!< DFSDM interrupt flag clear register, Address offset: 0x10C */ + __IO uint32_t FLTJCHGR; /*!< DFSDM injected channel group selection register, Address offset: 0x110 */ + __IO uint32_t FLTFCR; /*!< DFSDM filter control register, Address offset: 0x114 */ + __IO uint32_t FLTJDATAR; /*!< DFSDM data register for injected group, Address offset: 0x118 */ + __IO uint32_t FLTRDATAR; /*!< DFSDM data register for regular group, Address offset: 0x11C */ + __IO uint32_t FLTAWHTR; /*!< DFSDM analog watchdog high threshold register, Address offset: 0x120 */ + __IO uint32_t FLTAWLTR; /*!< DFSDM analog watchdog low threshold register, Address offset: 0x124 */ + __IO uint32_t FLTAWSR; /*!< DFSDM analog watchdog status register Address offset: 0x128 */ + __IO uint32_t FLTAWCFR; /*!< DFSDM analog watchdog clear flag register Address offset: 0x12C */ + __IO uint32_t FLTEXMAX; /*!< DFSDM extreme detector maximum register, Address offset: 0x130 */ + __IO uint32_t FLTEXMIN; /*!< DFSDM extreme detector minimum register Address offset: 0x134 */ + __IO uint32_t FLTCNVTIMR; /*!< DFSDM conversion timer, Address offset: 0x138 */ +} DFSDM_Filter_TypeDef; + +/** + * @brief DFSDM channel configuration registers + */ +typedef struct +{ + __IO uint32_t CHCFGR1; /*!< DFSDM channel configuration register1, Address offset: 0x00 */ + __IO uint32_t CHCFGR2; /*!< DFSDM channel configuration register2, Address offset: 0x04 */ + __IO uint32_t CHAWSCDR; /*!< DFSDM channel analog watchdog and + short circuit detector register, Address offset: 0x08 */ + __IO uint32_t CHWDATAR; /*!< DFSDM channel watchdog filter data register, Address offset: 0x0C */ + __IO uint32_t CHDATINR; /*!< DFSDM channel data input register, Address offset: 0x10 */ +} DFSDM_Channel_TypeDef; + +/** + * @brief Debug MCU + */ + +typedef struct +{ + __IO uint32_t IDCODE; /*!< MCU device ID code, Address offset: 0x00 */ + __IO uint32_t CR; /*!< Debug MCU configuration register, Address offset: 0x04 */ + __IO uint32_t APB1FZR1; /*!< Debug MCU APB1 freeze register 1, Address offset: 0x08 */ + __IO uint32_t APB1FZR2; /*!< Debug MCU APB1 freeze register 2, Address offset: 0x0C */ + __IO uint32_t APB2FZ; /*!< Debug MCU APB2 freeze register, Address offset: 0x10 */ +} DBGMCU_TypeDef; + + +/** + * @brief DMA Controller + */ + +typedef struct +{ + __IO uint32_t CCR; /*!< DMA channel x configuration register */ + __IO uint32_t CNDTR; /*!< DMA channel x number of data register */ + __IO uint32_t CPAR; /*!< DMA channel x peripheral address register */ + __IO uint32_t CMAR; /*!< DMA channel x memory address register */ +} DMA_Channel_TypeDef; + +typedef struct +{ + __IO uint32_t ISR; /*!< DMA interrupt status register, Address offset: 0x00 */ + __IO uint32_t IFCR; /*!< DMA interrupt flag clear register, Address offset: 0x04 */ +} DMA_TypeDef; + +typedef struct +{ + __IO uint32_t CSELR; /*!< DMA channel selection register */ +} DMA_Request_TypeDef; + +/* Legacy define */ +#define DMA_request_TypeDef DMA_Request_TypeDef + + +/** + * @brief DMA2D Controller + */ + +typedef struct +{ + __IO uint32_t CR; /*!< DMA2D Control Register, Address offset: 0x00 */ + __IO uint32_t ISR; /*!< DMA2D Interrupt Status Register, Address offset: 0x04 */ + __IO uint32_t IFCR; /*!< DMA2D Interrupt Flag Clear Register, Address offset: 0x08 */ + __IO uint32_t FGMAR; /*!< DMA2D Foreground Memory Address Register, Address offset: 0x0C */ + __IO uint32_t FGOR; /*!< DMA2D Foreground Offset Register, Address offset: 0x10 */ + __IO uint32_t BGMAR; /*!< DMA2D Background Memory Address Register, Address offset: 0x14 */ + __IO uint32_t BGOR; /*!< DMA2D Background Offset Register, Address offset: 0x18 */ + __IO uint32_t FGPFCCR; /*!< DMA2D Foreground PFC Control Register, Address offset: 0x1C */ + __IO uint32_t FGCOLR; /*!< DMA2D Foreground Color Register, Address offset: 0x20 */ + __IO uint32_t BGPFCCR; /*!< DMA2D Background PFC Control Register, Address offset: 0x24 */ + __IO uint32_t BGCOLR; /*!< DMA2D Background Color Register, Address offset: 0x28 */ + __IO uint32_t FGCMAR; /*!< DMA2D Foreground CLUT Memory Address Register, Address offset: 0x2C */ + __IO uint32_t BGCMAR; /*!< DMA2D Background CLUT Memory Address Register, Address offset: 0x30 */ + __IO uint32_t OPFCCR; /*!< DMA2D Output PFC Control Register, Address offset: 0x34 */ + __IO uint32_t OCOLR; /*!< DMA2D Output Color Register, Address offset: 0x38 */ + __IO uint32_t OMAR; /*!< DMA2D Output Memory Address Register, Address offset: 0x3C */ + __IO uint32_t OOR; /*!< DMA2D Output Offset Register, Address offset: 0x40 */ + __IO uint32_t NLR; /*!< DMA2D Number of Line Register, Address offset: 0x44 */ + __IO uint32_t LWR; /*!< DMA2D Line Watermark Register, Address offset: 0x48 */ + __IO uint32_t AMTCR; /*!< DMA2D AHB Master Timer Configuration Register, Address offset: 0x4C */ + uint32_t RESERVED[236]; /*!< Reserved, Address offset: 0x50-0x3FF */ + __IO uint32_t FGCLUT[256]; /*!< DMA2D Foreground CLUT, Address offset:0x400-0x7FF */ + __IO uint32_t BGCLUT[256]; /*!< DMA2D Background CLUT, Address offset:0x800-0xBFF */ +} DMA2D_TypeDef; + +/** + * @brief External Interrupt/Event Controller + */ + +typedef struct +{ + __IO uint32_t IMR1; /*!< EXTI Interrupt mask register 1, Address offset: 0x00 */ + __IO uint32_t EMR1; /*!< EXTI Event mask register 1, Address offset: 0x04 */ + __IO uint32_t RTSR1; /*!< EXTI Rising trigger selection register 1, Address offset: 0x08 */ + __IO uint32_t FTSR1; /*!< EXTI Falling trigger selection register 1, Address offset: 0x0C */ + __IO uint32_t SWIER1; /*!< EXTI Software interrupt event register 1, Address offset: 0x10 */ + __IO uint32_t PR1; /*!< EXTI Pending register 1, Address offset: 0x14 */ + uint32_t RESERVED1; /*!< Reserved, 0x18 */ + uint32_t RESERVED2; /*!< Reserved, 0x1C */ + __IO uint32_t IMR2; /*!< EXTI Interrupt mask register 2, Address offset: 0x20 */ + __IO uint32_t EMR2; /*!< EXTI Event mask register 2, Address offset: 0x24 */ + __IO uint32_t RTSR2; /*!< EXTI Rising trigger selection register 2, Address offset: 0x28 */ + __IO uint32_t FTSR2; /*!< EXTI Falling trigger selection register 2, Address offset: 0x2C */ + __IO uint32_t SWIER2; /*!< EXTI Software interrupt event register 2, Address offset: 0x30 */ + __IO uint32_t PR2; /*!< EXTI Pending register 2, Address offset: 0x34 */ +} EXTI_TypeDef; + + +/** + * @brief Firewall + */ + +typedef struct +{ + __IO uint32_t CSSA; /*!< Code Segment Start Address register, Address offset: 0x00 */ + __IO uint32_t CSL; /*!< Code Segment Length register, Address offset: 0x04 */ + __IO uint32_t NVDSSA; /*!< NON volatile data Segment Start Address register, Address offset: 0x08 */ + __IO uint32_t NVDSL; /*!< NON volatile data Segment Length register, Address offset: 0x0C */ + __IO uint32_t VDSSA ; /*!< Volatile data Segment Start Address register, Address offset: 0x10 */ + __IO uint32_t VDSL ; /*!< Volatile data Segment Length register, Address offset: 0x14 */ + uint32_t RESERVED1; /*!< Reserved1, Address offset: 0x18 */ + uint32_t RESERVED2; /*!< Reserved2, Address offset: 0x1C */ + __IO uint32_t CR ; /*!< Configuration register, Address offset: 0x20 */ +} FIREWALL_TypeDef; + + +/** + * @brief FLASH Registers + */ + +typedef struct +{ + __IO uint32_t ACR; /*!< FLASH access control register, Address offset: 0x00 */ + __IO uint32_t PDKEYR; /*!< FLASH power down key register, Address offset: 0x04 */ + __IO uint32_t KEYR; /*!< FLASH key register, Address offset: 0x08 */ + __IO uint32_t OPTKEYR; /*!< FLASH option key register, Address offset: 0x0C */ + __IO uint32_t SR; /*!< FLASH status register, Address offset: 0x10 */ + __IO uint32_t CR; /*!< FLASH control register, Address offset: 0x14 */ + __IO uint32_t ECCR; /*!< FLASH ECC register, Address offset: 0x18 */ + __IO uint32_t RESERVED1; /*!< Reserved1, Address offset: 0x1C */ + __IO uint32_t OPTR; /*!< FLASH option register, Address offset: 0x20 */ + __IO uint32_t PCROP1SR; /*!< FLASH bank1 PCROP start address register, Address offset: 0x24 */ + __IO uint32_t PCROP1ER; /*!< FLASH bank1 PCROP end address register, Address offset: 0x28 */ + __IO uint32_t WRP1AR; /*!< FLASH bank1 WRP area A address register, Address offset: 0x2C */ + __IO uint32_t WRP1BR; /*!< FLASH bank1 WRP area B address register, Address offset: 0x30 */ + uint32_t RESERVED2[4]; /*!< Reserved2, Address offset: 0x34-0x40 */ + __IO uint32_t PCROP2SR; /*!< FLASH bank2 PCROP start address register, Address offset: 0x44 */ + __IO uint32_t PCROP2ER; /*!< FLASH bank2 PCROP end address register, Address offset: 0x48 */ + __IO uint32_t WRP2AR; /*!< FLASH bank2 WRP area A address register, Address offset: 0x4C */ + __IO uint32_t WRP2BR; /*!< FLASH bank2 WRP area B address register, Address offset: 0x50 */ +} FLASH_TypeDef; + + +/** + * @brief Flexible Memory Controller + */ + +typedef struct +{ + __IO uint32_t BTCR[8]; /*!< NOR/PSRAM chip-select control register(BCR) and chip-select timing register(BTR), Address offset: 0x00-1C */ +} FMC_Bank1_TypeDef; + +/** + * @brief Flexible Memory Controller Bank1E + */ + +typedef struct +{ + __IO uint32_t BWTR[7]; /*!< NOR/PSRAM write timing registers, Address offset: 0x104-0x11C */ +} FMC_Bank1E_TypeDef; + +/** + * @brief Flexible Memory Controller Bank3 + */ + +typedef struct +{ + __IO uint32_t PCR; /*!< NAND Flash control register, Address offset: 0x80 */ + __IO uint32_t SR; /*!< NAND Flash FIFO status and interrupt register, Address offset: 0x84 */ + __IO uint32_t PMEM; /*!< NAND Flash Common memory space timing register, Address offset: 0x88 */ + __IO uint32_t PATT; /*!< NAND Flash Attribute memory space timing register, Address offset: 0x8C */ + uint32_t RESERVED0; /*!< Reserved, 0x90 */ + __IO uint32_t ECCR; /*!< NAND Flash ECC result registers, Address offset: 0x94 */ +} FMC_Bank3_TypeDef; + +/** + * @brief General Purpose I/O + */ + +typedef struct +{ + __IO uint32_t MODER; /*!< GPIO port mode register, Address offset: 0x00 */ + __IO uint32_t OTYPER; /*!< GPIO port output type register, Address offset: 0x04 */ + __IO uint32_t OSPEEDR; /*!< GPIO port output speed register, Address offset: 0x08 */ + __IO uint32_t PUPDR; /*!< GPIO port pull-up/pull-down register, Address offset: 0x0C */ + __IO uint32_t IDR; /*!< GPIO port input data register, Address offset: 0x10 */ + __IO uint32_t ODR; /*!< GPIO port output data register, Address offset: 0x14 */ + __IO uint32_t BSRR; /*!< GPIO port bit set/reset register, Address offset: 0x18 */ + __IO uint32_t LCKR; /*!< GPIO port configuration lock register, Address offset: 0x1C */ + __IO uint32_t AFR[2]; /*!< GPIO alternate function registers, Address offset: 0x20-0x24 */ + __IO uint32_t BRR; /*!< GPIO Bit Reset register, Address offset: 0x28 */ + +} GPIO_TypeDef; + + +/** + * @brief Inter-integrated Circuit Interface + */ + +typedef struct +{ + __IO uint32_t CR1; /*!< I2C Control register 1, Address offset: 0x00 */ + __IO uint32_t CR2; /*!< I2C Control register 2, Address offset: 0x04 */ + __IO uint32_t OAR1; /*!< I2C Own address 1 register, Address offset: 0x08 */ + __IO uint32_t OAR2; /*!< I2C Own address 2 register, Address offset: 0x0C */ + __IO uint32_t TIMINGR; /*!< I2C Timing register, Address offset: 0x10 */ + __IO uint32_t TIMEOUTR; /*!< I2C Timeout register, Address offset: 0x14 */ + __IO uint32_t ISR; /*!< I2C Interrupt and status register, Address offset: 0x18 */ + __IO uint32_t ICR; /*!< I2C Interrupt clear register, Address offset: 0x1C */ + __IO uint32_t PECR; /*!< I2C PEC register, Address offset: 0x20 */ + __IO uint32_t RXDR; /*!< I2C Receive data register, Address offset: 0x24 */ + __IO uint32_t TXDR; /*!< I2C Transmit data register, Address offset: 0x28 */ +} I2C_TypeDef; + +/** + * @brief Independent WATCHDOG + */ + +typedef struct +{ + __IO uint32_t KR; /*!< IWDG Key register, Address offset: 0x00 */ + __IO uint32_t PR; /*!< IWDG Prescaler register, Address offset: 0x04 */ + __IO uint32_t RLR; /*!< IWDG Reload register, Address offset: 0x08 */ + __IO uint32_t SR; /*!< IWDG Status register, Address offset: 0x0C */ + __IO uint32_t WINR; /*!< IWDG Window register, Address offset: 0x10 */ +} IWDG_TypeDef; + +/** + * @brief LCD + */ + +typedef struct +{ + __IO uint32_t CR; /*!< LCD control register, Address offset: 0x00 */ + __IO uint32_t FCR; /*!< LCD frame control register, Address offset: 0x04 */ + __IO uint32_t SR; /*!< LCD status register, Address offset: 0x08 */ + __IO uint32_t CLR; /*!< LCD clear register, Address offset: 0x0C */ + uint32_t RESERVED; /*!< Reserved, Address offset: 0x10 */ + __IO uint32_t RAM[16]; /*!< LCD display memory, Address offset: 0x14-0x50 */ +} LCD_TypeDef; + +/** + * @brief LPTIMER + */ +typedef struct +{ + __IO uint32_t ISR; /*!< LPTIM Interrupt and Status register, Address offset: 0x00 */ + __IO uint32_t ICR; /*!< LPTIM Interrupt Clear register, Address offset: 0x04 */ + __IO uint32_t IER; /*!< LPTIM Interrupt Enable register, Address offset: 0x08 */ + __IO uint32_t CFGR; /*!< LPTIM Configuration register, Address offset: 0x0C */ + __IO uint32_t CR; /*!< LPTIM Control register, Address offset: 0x10 */ + __IO uint32_t CMP; /*!< LPTIM Compare register, Address offset: 0x14 */ + __IO uint32_t ARR; /*!< LPTIM Autoreload register, Address offset: 0x18 */ + __IO uint32_t CNT; /*!< LPTIM Counter register, Address offset: 0x1C */ + __IO uint32_t OR; /*!< LPTIM Option register, Address offset: 0x20 */ +} LPTIM_TypeDef; + +/** + * @brief Operational Amplifier (OPAMP) + */ + +typedef struct +{ + __IO uint32_t CSR; /*!< OPAMP control/status register, Address offset: 0x00 */ + __IO uint32_t OTR; /*!< OPAMP offset trimming register for normal mode, Address offset: 0x04 */ + __IO uint32_t LPOTR; /*!< OPAMP offset trimming register for low power mode, Address offset: 0x08 */ +} OPAMP_TypeDef; + +typedef struct +{ + __IO uint32_t CSR; /*!< OPAMP control/status register, used for bits common to several OPAMP instances, Address offset: 0x00 */ +} OPAMP_Common_TypeDef; + +/** + * @brief Power Control + */ + +typedef struct +{ + __IO uint32_t CR1; /*!< PWR power control register 1, Address offset: 0x00 */ + __IO uint32_t CR2; /*!< PWR power control register 2, Address offset: 0x04 */ + __IO uint32_t CR3; /*!< PWR power control register 3, Address offset: 0x08 */ + __IO uint32_t CR4; /*!< PWR power control register 4, Address offset: 0x0C */ + __IO uint32_t SR1; /*!< PWR power status register 1, Address offset: 0x10 */ + __IO uint32_t SR2; /*!< PWR power status register 2, Address offset: 0x14 */ + __IO uint32_t SCR; /*!< PWR power status reset register, Address offset: 0x18 */ + uint32_t RESERVED; /*!< Reserved, Address offset: 0x1C */ + __IO uint32_t PUCRA; /*!< Pull_up control register of portA, Address offset: 0x20 */ + __IO uint32_t PDCRA; /*!< Pull_Down control register of portA, Address offset: 0x24 */ + __IO uint32_t PUCRB; /*!< Pull_up control register of portB, Address offset: 0x28 */ + __IO uint32_t PDCRB; /*!< Pull_Down control register of portB, Address offset: 0x2C */ + __IO uint32_t PUCRC; /*!< Pull_up control register of portC, Address offset: 0x30 */ + __IO uint32_t PDCRC; /*!< Pull_Down control register of portC, Address offset: 0x34 */ + __IO uint32_t PUCRD; /*!< Pull_up control register of portD, Address offset: 0x38 */ + __IO uint32_t PDCRD; /*!< Pull_Down control register of portD, Address offset: 0x3C */ + __IO uint32_t PUCRE; /*!< Pull_up control register of portE, Address offset: 0x40 */ + __IO uint32_t PDCRE; /*!< Pull_Down control register of portE, Address offset: 0x44 */ + __IO uint32_t PUCRF; /*!< Pull_up control register of portF, Address offset: 0x48 */ + __IO uint32_t PDCRF; /*!< Pull_Down control register of portF, Address offset: 0x4C */ + __IO uint32_t PUCRG; /*!< Pull_up control register of portG, Address offset: 0x50 */ + __IO uint32_t PDCRG; /*!< Pull_Down control register of portG, Address offset: 0x54 */ + __IO uint32_t PUCRH; /*!< Pull_up control register of portH, Address offset: 0x58 */ + __IO uint32_t PDCRH; /*!< Pull_Down control register of portH, Address offset: 0x5C */ + __IO uint32_t PUCRI; /*!< Pull_up control register of portI, Address offset: 0x60 */ + __IO uint32_t PDCRI; /*!< Pull_Down control register of portI, Address offset: 0x64 */ +} PWR_TypeDef; + + +/** + * @brief QUAD Serial Peripheral Interface + */ + +typedef struct +{ + __IO uint32_t CR; /*!< QUADSPI Control register, Address offset: 0x00 */ + __IO uint32_t DCR; /*!< QUADSPI Device Configuration register, Address offset: 0x04 */ + __IO uint32_t SR; /*!< QUADSPI Status register, Address offset: 0x08 */ + __IO uint32_t FCR; /*!< QUADSPI Flag Clear register, Address offset: 0x0C */ + __IO uint32_t DLR; /*!< QUADSPI Data Length register, Address offset: 0x10 */ + __IO uint32_t CCR; /*!< QUADSPI Communication Configuration register, Address offset: 0x14 */ + __IO uint32_t AR; /*!< QUADSPI Address register, Address offset: 0x18 */ + __IO uint32_t ABR; /*!< QUADSPI Alternate Bytes register, Address offset: 0x1C */ + __IO uint32_t DR; /*!< QUADSPI Data register, Address offset: 0x20 */ + __IO uint32_t PSMKR; /*!< QUADSPI Polling Status Mask register, Address offset: 0x24 */ + __IO uint32_t PSMAR; /*!< QUADSPI Polling Status Match register, Address offset: 0x28 */ + __IO uint32_t PIR; /*!< QUADSPI Polling Interval register, Address offset: 0x2C */ + __IO uint32_t LPTR; /*!< QUADSPI Low Power Timeout register, Address offset: 0x30 */ +} QUADSPI_TypeDef; + + +/** + * @brief Reset and Clock Control + */ + +typedef struct +{ + __IO uint32_t CR; /*!< RCC clock control register, Address offset: 0x00 */ + __IO uint32_t ICSCR; /*!< RCC internal clock sources calibration register, Address offset: 0x04 */ + __IO uint32_t CFGR; /*!< RCC clock configuration register, Address offset: 0x08 */ + __IO uint32_t PLLCFGR; /*!< RCC system PLL configuration register, Address offset: 0x0C */ + __IO uint32_t PLLSAI1CFGR; /*!< RCC PLL SAI1 configuration register, Address offset: 0x10 */ + __IO uint32_t PLLSAI2CFGR; /*!< RCC PLL SAI2 configuration register, Address offset: 0x14 */ + __IO uint32_t CIER; /*!< RCC clock interrupt enable register, Address offset: 0x18 */ + __IO uint32_t CIFR; /*!< RCC clock interrupt flag register, Address offset: 0x1C */ + __IO uint32_t CICR; /*!< RCC clock interrupt clear register, Address offset: 0x20 */ + uint32_t RESERVED0; /*!< Reserved, Address offset: 0x24 */ + __IO uint32_t AHB1RSTR; /*!< RCC AHB1 peripheral reset register, Address offset: 0x28 */ + __IO uint32_t AHB2RSTR; /*!< RCC AHB2 peripheral reset register, Address offset: 0x2C */ + __IO uint32_t AHB3RSTR; /*!< RCC AHB3 peripheral reset register, Address offset: 0x30 */ + uint32_t RESERVED1; /*!< Reserved, Address offset: 0x34 */ + __IO uint32_t APB1RSTR1; /*!< RCC APB1 peripheral reset register 1, Address offset: 0x38 */ + __IO uint32_t APB1RSTR2; /*!< RCC APB1 peripheral reset register 2, Address offset: 0x3C */ + __IO uint32_t APB2RSTR; /*!< RCC APB2 peripheral reset register, Address offset: 0x40 */ + uint32_t RESERVED2; /*!< Reserved, Address offset: 0x44 */ + __IO uint32_t AHB1ENR; /*!< RCC AHB1 peripheral clocks enable register, Address offset: 0x48 */ + __IO uint32_t AHB2ENR; /*!< RCC AHB2 peripheral clocks enable register, Address offset: 0x4C */ + __IO uint32_t AHB3ENR; /*!< RCC AHB3 peripheral clocks enable register, Address offset: 0x50 */ + uint32_t RESERVED3; /*!< Reserved, Address offset: 0x54 */ + __IO uint32_t APB1ENR1; /*!< RCC APB1 peripheral clocks enable register 1, Address offset: 0x58 */ + __IO uint32_t APB1ENR2; /*!< RCC APB1 peripheral clocks enable register 2, Address offset: 0x5C */ + __IO uint32_t APB2ENR; /*!< RCC APB2 peripheral clocks enable register, Address offset: 0x60 */ + uint32_t RESERVED4; /*!< Reserved, Address offset: 0x64 */ + __IO uint32_t AHB1SMENR; /*!< RCC AHB1 peripheral clocks enable in sleep and stop modes register, Address offset: 0x68 */ + __IO uint32_t AHB2SMENR; /*!< RCC AHB2 peripheral clocks enable in sleep and stop modes register, Address offset: 0x6C */ + __IO uint32_t AHB3SMENR; /*!< RCC AHB3 peripheral clocks enable in sleep and stop modes register, Address offset: 0x70 */ + uint32_t RESERVED5; /*!< Reserved, Address offset: 0x74 */ + __IO uint32_t APB1SMENR1; /*!< RCC APB1 peripheral clocks enable in sleep mode and stop modes register 1, Address offset: 0x78 */ + __IO uint32_t APB1SMENR2; /*!< RCC APB1 peripheral clocks enable in sleep mode and stop modes register 2, Address offset: 0x7C */ + __IO uint32_t APB2SMENR; /*!< RCC APB2 peripheral clocks enable in sleep mode and stop modes register, Address offset: 0x80 */ + uint32_t RESERVED6; /*!< Reserved, Address offset: 0x84 */ + __IO uint32_t CCIPR; /*!< RCC peripherals independent clock configuration register, Address offset: 0x88 */ + uint32_t RESERVED7; /*!< Reserved, Address offset: 0x8C */ + __IO uint32_t BDCR; /*!< RCC backup domain control register, Address offset: 0x90 */ + __IO uint32_t CSR; /*!< RCC clock control & status register, Address offset: 0x94 */ + __IO uint32_t CRRCR; /*!< RCC clock recovery RC register, Address offset: 0x98 */ + __IO uint32_t CCIPR2; /*!< RCC peripherals independent clock configuration register 2, Address offset: 0x9C */ +} RCC_TypeDef; + +/** + * @brief Real-Time Clock + */ + +typedef struct +{ + __IO uint32_t TR; /*!< RTC time register, Address offset: 0x00 */ + __IO uint32_t DR; /*!< RTC date register, Address offset: 0x04 */ + __IO uint32_t CR; /*!< RTC control register, Address offset: 0x08 */ + __IO uint32_t ISR; /*!< RTC initialization and status register, Address offset: 0x0C */ + __IO uint32_t PRER; /*!< RTC prescaler register, Address offset: 0x10 */ + __IO uint32_t WUTR; /*!< RTC wakeup timer register, Address offset: 0x14 */ + uint32_t reserved; /*!< Reserved */ + __IO uint32_t ALRMAR; /*!< RTC alarm A register, Address offset: 0x1C */ + __IO uint32_t ALRMBR; /*!< RTC alarm B register, Address offset: 0x20 */ + __IO uint32_t WPR; /*!< RTC write protection register, Address offset: 0x24 */ + __IO uint32_t SSR; /*!< RTC sub second register, Address offset: 0x28 */ + __IO uint32_t SHIFTR; /*!< RTC shift control register, Address offset: 0x2C */ + __IO uint32_t TSTR; /*!< RTC time stamp time register, Address offset: 0x30 */ + __IO uint32_t TSDR; /*!< RTC time stamp date register, Address offset: 0x34 */ + __IO uint32_t TSSSR; /*!< RTC time-stamp sub second register, Address offset: 0x38 */ + __IO uint32_t CALR; /*!< RTC calibration register, Address offset: 0x3C */ + __IO uint32_t TAMPCR; /*!< RTC tamper configuration register, Address offset: 0x40 */ + __IO uint32_t ALRMASSR; /*!< RTC alarm A sub second register, Address offset: 0x44 */ + __IO uint32_t ALRMBSSR; /*!< RTC alarm B sub second register, Address offset: 0x48 */ + __IO uint32_t OR; /*!< RTC option register, Address offset: 0x4C */ + __IO uint32_t BKP0R; /*!< RTC backup register 0, Address offset: 0x50 */ + __IO uint32_t BKP1R; /*!< RTC backup register 1, Address offset: 0x54 */ + __IO uint32_t BKP2R; /*!< RTC backup register 2, Address offset: 0x58 */ + __IO uint32_t BKP3R; /*!< RTC backup register 3, Address offset: 0x5C */ + __IO uint32_t BKP4R; /*!< RTC backup register 4, Address offset: 0x60 */ + __IO uint32_t BKP5R; /*!< RTC backup register 5, Address offset: 0x64 */ + __IO uint32_t BKP6R; /*!< RTC backup register 6, Address offset: 0x68 */ + __IO uint32_t BKP7R; /*!< RTC backup register 7, Address offset: 0x6C */ + __IO uint32_t BKP8R; /*!< RTC backup register 8, Address offset: 0x70 */ + __IO uint32_t BKP9R; /*!< RTC backup register 9, Address offset: 0x74 */ + __IO uint32_t BKP10R; /*!< RTC backup register 10, Address offset: 0x78 */ + __IO uint32_t BKP11R; /*!< RTC backup register 11, Address offset: 0x7C */ + __IO uint32_t BKP12R; /*!< RTC backup register 12, Address offset: 0x80 */ + __IO uint32_t BKP13R; /*!< RTC backup register 13, Address offset: 0x84 */ + __IO uint32_t BKP14R; /*!< RTC backup register 14, Address offset: 0x88 */ + __IO uint32_t BKP15R; /*!< RTC backup register 15, Address offset: 0x8C */ + __IO uint32_t BKP16R; /*!< RTC backup register 16, Address offset: 0x90 */ + __IO uint32_t BKP17R; /*!< RTC backup register 17, Address offset: 0x94 */ + __IO uint32_t BKP18R; /*!< RTC backup register 18, Address offset: 0x98 */ + __IO uint32_t BKP19R; /*!< RTC backup register 19, Address offset: 0x9C */ + __IO uint32_t BKP20R; /*!< RTC backup register 20, Address offset: 0xA0 */ + __IO uint32_t BKP21R; /*!< RTC backup register 21, Address offset: 0xA4 */ + __IO uint32_t BKP22R; /*!< RTC backup register 22, Address offset: 0xA8 */ + __IO uint32_t BKP23R; /*!< RTC backup register 23, Address offset: 0xAC */ + __IO uint32_t BKP24R; /*!< RTC backup register 24, Address offset: 0xB0 */ + __IO uint32_t BKP25R; /*!< RTC backup register 25, Address offset: 0xB4 */ + __IO uint32_t BKP26R; /*!< RTC backup register 26, Address offset: 0xB8 */ + __IO uint32_t BKP27R; /*!< RTC backup register 27, Address offset: 0xBC */ + __IO uint32_t BKP28R; /*!< RTC backup register 28, Address offset: 0xC0 */ + __IO uint32_t BKP29R; /*!< RTC backup register 29, Address offset: 0xC4 */ + __IO uint32_t BKP30R; /*!< RTC backup register 30, Address offset: 0xC8 */ + __IO uint32_t BKP31R; /*!< RTC backup register 31, Address offset: 0xCC */ +} RTC_TypeDef; + +/** + * @brief Serial Audio Interface + */ + +typedef struct +{ + __IO uint32_t GCR; /*!< SAI global configuration register, Address offset: 0x00 */ +} SAI_TypeDef; + +typedef struct +{ + __IO uint32_t CR1; /*!< SAI block x configuration register 1, Address offset: 0x04 */ + __IO uint32_t CR2; /*!< SAI block x configuration register 2, Address offset: 0x08 */ + __IO uint32_t FRCR; /*!< SAI block x frame configuration register, Address offset: 0x0C */ + __IO uint32_t SLOTR; /*!< SAI block x slot register, Address offset: 0x10 */ + __IO uint32_t IMR; /*!< SAI block x interrupt mask register, Address offset: 0x14 */ + __IO uint32_t SR; /*!< SAI block x status register, Address offset: 0x18 */ + __IO uint32_t CLRFR; /*!< SAI block x clear flag register, Address offset: 0x1C */ + __IO uint32_t DR; /*!< SAI block x data register, Address offset: 0x20 */ +} SAI_Block_TypeDef; + + +/** + * @brief Secure digital input/output Interface + */ + +typedef struct +{ + __IO uint32_t POWER; /*!< SDMMC power control register, Address offset: 0x00 */ + __IO uint32_t CLKCR; /*!< SDMMC clock control register, Address offset: 0x04 */ + __IO uint32_t ARG; /*!< SDMMC argument register, Address offset: 0x08 */ + __IO uint32_t CMD; /*!< SDMMC command register, Address offset: 0x0C */ + __I uint32_t RESPCMD; /*!< SDMMC command response register, Address offset: 0x10 */ + __I uint32_t RESP1; /*!< SDMMC response 1 register, Address offset: 0x14 */ + __I uint32_t RESP2; /*!< SDMMC response 2 register, Address offset: 0x18 */ + __I uint32_t RESP3; /*!< SDMMC response 3 register, Address offset: 0x1C */ + __I uint32_t RESP4; /*!< SDMMC response 4 register, Address offset: 0x20 */ + __IO uint32_t DTIMER; /*!< SDMMC data timer register, Address offset: 0x24 */ + __IO uint32_t DLEN; /*!< SDMMC data length register, Address offset: 0x28 */ + __IO uint32_t DCTRL; /*!< SDMMC data control register, Address offset: 0x2C */ + __I uint32_t DCOUNT; /*!< SDMMC data counter register, Address offset: 0x30 */ + __I uint32_t STA; /*!< SDMMC status register, Address offset: 0x34 */ + __IO uint32_t ICR; /*!< SDMMC interrupt clear register, Address offset: 0x38 */ + __IO uint32_t MASK; /*!< SDMMC mask register, Address offset: 0x3C */ + uint32_t RESERVED0[2]; /*!< Reserved, 0x40-0x44 */ + __I uint32_t FIFOCNT; /*!< SDMMC FIFO counter register, Address offset: 0x48 */ + uint32_t RESERVED1[13]; /*!< Reserved, 0x4C-0x7C */ + __IO uint32_t FIFO; /*!< SDMMC data FIFO register, Address offset: 0x80 */ +} SDMMC_TypeDef; + + +/** + * @brief Serial Peripheral Interface + */ + +typedef struct +{ + __IO uint32_t CR1; /*!< SPI Control register 1, Address offset: 0x00 */ + __IO uint32_t CR2; /*!< SPI Control register 2, Address offset: 0x04 */ + __IO uint32_t SR; /*!< SPI Status register, Address offset: 0x08 */ + __IO uint32_t DR; /*!< SPI data register, Address offset: 0x0C */ + __IO uint32_t CRCPR; /*!< SPI CRC polynomial register, Address offset: 0x10 */ + __IO uint32_t RXCRCR; /*!< SPI Rx CRC register, Address offset: 0x14 */ + __IO uint32_t TXCRCR; /*!< SPI Tx CRC register, Address offset: 0x18 */ +} SPI_TypeDef; + + +/** + * @brief Single Wire Protocol Master Interface SPWMI + */ + +typedef struct +{ + __IO uint32_t CR; /*!< SWPMI Configuration/Control register, Address offset: 0x00 */ + __IO uint32_t BRR; /*!< SWPMI bitrate register, Address offset: 0x04 */ + uint32_t RESERVED1; /*!< Reserved, 0x08 */ + __IO uint32_t ISR; /*!< SWPMI Interrupt and Status register, Address offset: 0x0C */ + __IO uint32_t ICR; /*!< SWPMI Interrupt Flag Clear register, Address offset: 0x10 */ + __IO uint32_t IER; /*!< SWPMI Interrupt Enable register, Address offset: 0x14 */ + __IO uint32_t RFL; /*!< SWPMI Receive Frame Length register, Address offset: 0x18 */ + __IO uint32_t TDR; /*!< SWPMI Transmit data register, Address offset: 0x1C */ + __IO uint32_t RDR; /*!< SWPMI Receive data register, Address offset: 0x20 */ + __IO uint32_t OR; /*!< SWPMI Option register, Address offset: 0x24 */ +} SWPMI_TypeDef; + + +/** + * @brief System configuration controller + */ + +typedef struct +{ + __IO uint32_t MEMRMP; /*!< SYSCFG memory remap register, Address offset: 0x00 */ + __IO uint32_t CFGR1; /*!< SYSCFG configuration register 1, Address offset: 0x04 */ + __IO uint32_t EXTICR[4]; /*!< SYSCFG external interrupt configuration registers, Address offset: 0x08-0x14 */ + __IO uint32_t SCSR; /*!< SYSCFG SRAM2 control and status register, Address offset: 0x18 */ + __IO uint32_t CFGR2; /*!< SYSCFG configuration register 2, Address offset: 0x1C */ + __IO uint32_t SWPR; /*!< SYSCFG SRAM2 write protection register, Address offset: 0x20 */ + __IO uint32_t SKR; /*!< SYSCFG SRAM2 key register, Address offset: 0x24 */ + __IO uint32_t SWPR2; /*!< SYSCFG SRAM2 write protection register 2, Address offset: 0x28 */ +} SYSCFG_TypeDef; + + +/** + * @brief TIM + */ + +typedef struct +{ + __IO uint32_t CR1; /*!< TIM control register 1, Address offset: 0x00 */ + __IO uint32_t CR2; /*!< TIM control register 2, Address offset: 0x04 */ + __IO uint32_t SMCR; /*!< TIM slave mode control register, Address offset: 0x08 */ + __IO uint32_t DIER; /*!< TIM DMA/interrupt enable register, Address offset: 0x0C */ + __IO uint32_t SR; /*!< TIM status register, Address offset: 0x10 */ + __IO uint32_t EGR; /*!< TIM event generation register, Address offset: 0x14 */ + __IO uint32_t CCMR1; /*!< TIM capture/compare mode register 1, Address offset: 0x18 */ + __IO uint32_t CCMR2; /*!< TIM capture/compare mode register 2, Address offset: 0x1C */ + __IO uint32_t CCER; /*!< TIM capture/compare enable register, Address offset: 0x20 */ + __IO uint32_t CNT; /*!< TIM counter register, Address offset: 0x24 */ + __IO uint32_t PSC; /*!< TIM prescaler, Address offset: 0x28 */ + __IO uint32_t ARR; /*!< TIM auto-reload register, Address offset: 0x2C */ + __IO uint32_t RCR; /*!< TIM repetition counter register, Address offset: 0x30 */ + __IO uint32_t CCR1; /*!< TIM capture/compare register 1, Address offset: 0x34 */ + __IO uint32_t CCR2; /*!< TIM capture/compare register 2, Address offset: 0x38 */ + __IO uint32_t CCR3; /*!< TIM capture/compare register 3, Address offset: 0x3C */ + __IO uint32_t CCR4; /*!< TIM capture/compare register 4, Address offset: 0x40 */ + __IO uint32_t BDTR; /*!< TIM break and dead-time register, Address offset: 0x44 */ + __IO uint32_t DCR; /*!< TIM DMA control register, Address offset: 0x48 */ + __IO uint32_t DMAR; /*!< TIM DMA address for full transfer, Address offset: 0x4C */ + __IO uint32_t OR1; /*!< TIM option register 1, Address offset: 0x50 */ + __IO uint32_t CCMR3; /*!< TIM capture/compare mode register 3, Address offset: 0x54 */ + __IO uint32_t CCR5; /*!< TIM capture/compare register5, Address offset: 0x58 */ + __IO uint32_t CCR6; /*!< TIM capture/compare register6, Address offset: 0x5C */ + __IO uint32_t OR2; /*!< TIM option register 2, Address offset: 0x60 */ + __IO uint32_t OR3; /*!< TIM option register 3, Address offset: 0x64 */ +} TIM_TypeDef; + + +/** + * @brief Touch Sensing Controller (TSC) + */ + +typedef struct +{ + __IO uint32_t CR; /*!< TSC control register, Address offset: 0x00 */ + __IO uint32_t IER; /*!< TSC interrupt enable register, Address offset: 0x04 */ + __IO uint32_t ICR; /*!< TSC interrupt clear register, Address offset: 0x08 */ + __IO uint32_t ISR; /*!< TSC interrupt status register, Address offset: 0x0C */ + __IO uint32_t IOHCR; /*!< TSC I/O hysteresis control register, Address offset: 0x10 */ + uint32_t RESERVED1; /*!< Reserved, Address offset: 0x14 */ + __IO uint32_t IOASCR; /*!< TSC I/O analog switch control register, Address offset: 0x18 */ + uint32_t RESERVED2; /*!< Reserved, Address offset: 0x1C */ + __IO uint32_t IOSCR; /*!< TSC I/O sampling control register, Address offset: 0x20 */ + uint32_t RESERVED3; /*!< Reserved, Address offset: 0x24 */ + __IO uint32_t IOCCR; /*!< TSC I/O channel control register, Address offset: 0x28 */ + uint32_t RESERVED4; /*!< Reserved, Address offset: 0x2C */ + __IO uint32_t IOGCSR; /*!< TSC I/O group control status register, Address offset: 0x30 */ + __IO uint32_t IOGXCR[8]; /*!< TSC I/O group x counter register, Address offset: 0x34-50 */ +} TSC_TypeDef; + +/** + * @brief Universal Synchronous Asynchronous Receiver Transmitter + */ + +typedef struct +{ + __IO uint32_t CR1; /*!< USART Control register 1, Address offset: 0x00 */ + __IO uint32_t CR2; /*!< USART Control register 2, Address offset: 0x04 */ + __IO uint32_t CR3; /*!< USART Control register 3, Address offset: 0x08 */ + __IO uint32_t BRR; /*!< USART Baud rate register, Address offset: 0x0C */ + __IO uint16_t GTPR; /*!< USART Guard time and prescaler register, Address offset: 0x10 */ + uint16_t RESERVED2; /*!< Reserved, 0x12 */ + __IO uint32_t RTOR; /*!< USART Receiver Time Out register, Address offset: 0x14 */ + __IO uint16_t RQR; /*!< USART Request register, Address offset: 0x18 */ + uint16_t RESERVED3; /*!< Reserved, 0x1A */ + __IO uint32_t ISR; /*!< USART Interrupt and status register, Address offset: 0x1C */ + __IO uint32_t ICR; /*!< USART Interrupt flag Clear register, Address offset: 0x20 */ + __IO uint16_t RDR; /*!< USART Receive Data register, Address offset: 0x24 */ + uint16_t RESERVED4; /*!< Reserved, 0x26 */ + __IO uint16_t TDR; /*!< USART Transmit Data register, Address offset: 0x28 */ + uint16_t RESERVED5; /*!< Reserved, 0x2A */ +} USART_TypeDef; + +/** + * @brief VREFBUF + */ + +typedef struct +{ + __IO uint32_t CSR; /*!< VREFBUF control and status register, Address offset: 0x00 */ + __IO uint32_t CCR; /*!< VREFBUF calibration and control register, Address offset: 0x04 */ +} VREFBUF_TypeDef; + +/** + * @brief Window WATCHDOG + */ + +typedef struct +{ + __IO uint32_t CR; /*!< WWDG Control register, Address offset: 0x00 */ + __IO uint32_t CFR; /*!< WWDG Configuration register, Address offset: 0x04 */ + __IO uint32_t SR; /*!< WWDG Status register, Address offset: 0x08 */ +} WWDG_TypeDef; + +/** + * @brief RNG + */ + +typedef struct +{ + __IO uint32_t CR; /*!< RNG control register, Address offset: 0x00 */ + __IO uint32_t SR; /*!< RNG status register, Address offset: 0x04 */ + __IO uint32_t DR; /*!< RNG data register, Address offset: 0x08 */ +} RNG_TypeDef; + +/** + * @brief USB_OTG_Core_register + */ +typedef struct +{ + __IO uint32_t GOTGCTL; /*!< USB_OTG Control and Status Register 000h*/ + __IO uint32_t GOTGINT; /*!< USB_OTG Interrupt Register 004h*/ + __IO uint32_t GAHBCFG; /*!< Core AHB Configuration Register 008h*/ + __IO uint32_t GUSBCFG; /*!< Core USB Configuration Register 00Ch*/ + __IO uint32_t GRSTCTL; /*!< Core Reset Register 010h*/ + __IO uint32_t GINTSTS; /*!< Core Interrupt Register 014h*/ + __IO uint32_t GINTMSK; /*!< Core Interrupt Mask Register 018h*/ + __IO uint32_t GRXSTSR; /*!< Receive Sts Q Read Register 01Ch*/ + __IO uint32_t GRXSTSP; /*!< Receive Sts Q Read & POP Register 020h*/ + __IO uint32_t GRXFSIZ; /*!< Receive FIFO Size Register 024h*/ + __IO uint32_t DIEPTXF0_HNPTXFSIZ; /*!< EP0 / Non Periodic Tx FIFO Size Register 028h*/ + __IO uint32_t HNPTXSTS; /*!< Non Periodic Tx FIFO/Queue Sts reg 02Ch*/ + uint32_t Reserved30[2]; /*!< Reserved 030h*/ + __IO uint32_t GCCFG; /*!< General Purpose IO Register 038h*/ + __IO uint32_t CID; /*!< User ID Register 03Ch*/ + __IO uint32_t GSNPSID; /*!< USB_OTG core ID 040h*/ + __IO uint32_t GHWCFG1; /*!< User HW config1 044h*/ + __IO uint32_t GHWCFG2; /*!< User HW config2 048h*/ + __IO uint32_t GHWCFG3; /*!< User HW config3 04Ch*/ + uint32_t Reserved6; /*!< Reserved 050h*/ + __IO uint32_t GLPMCFG; /*!< LPM Register 054h*/ + __IO uint32_t GPWRDN; /*!< Power Down Register 058h*/ + __IO uint32_t GDFIFOCFG; /*!< DFIFO Software Config Register 05Ch*/ + __IO uint32_t GADPCTL; /*!< ADP Timer, Control and Status Register 060h*/ + uint32_t Reserved43[39]; /*!< Reserved 064h-0FFh*/ + __IO uint32_t HPTXFSIZ; /*!< Host Periodic Tx FIFO Size Reg 100h*/ + __IO uint32_t DIEPTXF[0x0F]; /*!< dev Periodic Transmit FIFO */ +} USB_OTG_GlobalTypeDef; + +/** + * @brief USB_OTG_device_Registers + */ +typedef struct +{ + __IO uint32_t DCFG; /* dev Configuration Register 800h*/ + __IO uint32_t DCTL; /* dev Control Register 804h*/ + __IO uint32_t DSTS; /* dev Status Register (RO) 808h*/ + uint32_t Reserved0C; /* Reserved 80Ch*/ + __IO uint32_t DIEPMSK; /* dev IN Endpoint Mask 810h*/ + __IO uint32_t DOEPMSK; /* dev OUT Endpoint Mask 814h*/ + __IO uint32_t DAINT; /* dev All Endpoints Itr Reg 818h*/ + __IO uint32_t DAINTMSK; /* dev All Endpoints Itr Mask 81Ch*/ + uint32_t Reserved20; /* Reserved 820h*/ + uint32_t Reserved24; /* Reserved 824h*/ + __IO uint32_t DVBUSDIS; /* dev VBUS discharge Register 828h*/ + __IO uint32_t DVBUSPULSE; /* dev VBUS Pulse Register 82Ch*/ + __IO uint32_t DTHRCTL; /* dev thr 830h*/ + __IO uint32_t DIEPEMPMSK; /* dev empty msk 834h*/ + __IO uint32_t DEACHINT; /* dedicated EP interrupt 838h*/ + __IO uint32_t DEACHMSK; /* dedicated EP msk 83Ch*/ + uint32_t Reserved40; /* Reserved 840h*/ + __IO uint32_t DINEP1MSK; /* dedicated EP mask 844h*/ + uint32_t Reserved44[15]; /* Reserved 848-880h*/ + __IO uint32_t DOUTEP1MSK; /* dedicated EP msk 884h*/ +} USB_OTG_DeviceTypeDef; + +/** + * @brief USB_OTG_IN_Endpoint-Specific_Register + */ +typedef struct +{ + __IO uint32_t DIEPCTL; /* dev IN Endpoint Control Reg 900h + (ep_num * 20h) + 00h*/ + uint32_t Reserved04; /* Reserved 900h + (ep_num * 20h) + 04h*/ + __IO uint32_t DIEPINT; /* dev IN Endpoint Itr Reg 900h + (ep_num * 20h) + 08h*/ + uint32_t Reserved0C; /* Reserved 900h + (ep_num * 20h) + 0Ch*/ + __IO uint32_t DIEPTSIZ; /* IN Endpoint Txfer Size 900h + (ep_num * 20h) + 10h*/ + __IO uint32_t DIEPDMA; /* IN Endpoint DMA Address Reg 900h + (ep_num * 20h) + 14h*/ + __IO uint32_t DTXFSTS; /*IN Endpoint Tx FIFO Status Reg 900h + (ep_num * 20h) + 18h*/ + uint32_t Reserved18; /* Reserved 900h+(ep_num*20h)+1Ch-900h+ (ep_num * 20h) + 1Ch*/ +} USB_OTG_INEndpointTypeDef; + +/** + * @brief USB_OTG_OUT_Endpoint-Specific_Registers + */ +typedef struct +{ + __IO uint32_t DOEPCTL; /* dev OUT Endpoint Control Reg B00h + (ep_num * 20h) + 00h*/ + uint32_t Reserved04; /* Reserved B00h + (ep_num * 20h) + 04h*/ + __IO uint32_t DOEPINT; /* dev OUT Endpoint Itr Reg B00h + (ep_num * 20h) + 08h*/ + uint32_t Reserved0C; /* Reserved B00h + (ep_num * 20h) + 0Ch*/ + __IO uint32_t DOEPTSIZ; /* dev OUT Endpoint Txfer Size B00h + (ep_num * 20h) + 10h*/ + __IO uint32_t DOEPDMA; /* dev OUT Endpoint DMA Address B00h + (ep_num * 20h) + 14h*/ + uint32_t Reserved18[2]; /* Reserved B00h + (ep_num * 20h) + 18h - B00h + (ep_num * 20h) + 1Ch*/ +} USB_OTG_OUTEndpointTypeDef; + +/** + * @brief USB_OTG_Host_Mode_Register_Structures + */ +typedef struct +{ + __IO uint32_t HCFG; /* Host Configuration Register 400h*/ + __IO uint32_t HFIR; /* Host Frame Interval Register 404h*/ + __IO uint32_t HFNUM; /* Host Frame Nbr/Frame Remaining 408h*/ + uint32_t Reserved40C; /* Reserved 40Ch*/ + __IO uint32_t HPTXSTS; /* Host Periodic Tx FIFO/ Queue Status 410h*/ + __IO uint32_t HAINT; /* Host All Channels Interrupt Register 414h*/ + __IO uint32_t HAINTMSK; /* Host All Channels Interrupt Mask 418h*/ +} USB_OTG_HostTypeDef; + +/** + * @brief USB_OTG_Host_Channel_Specific_Registers + */ +typedef struct +{ + __IO uint32_t HCCHAR; + __IO uint32_t HCSPLT; + __IO uint32_t HCINT; + __IO uint32_t HCINTMSK; + __IO uint32_t HCTSIZ; + __IO uint32_t HCDMA; + uint32_t Reserved[2]; +} USB_OTG_HostChannelTypeDef; + +/** + * @} + */ + +/** @addtogroup Peripheral_memory_map + * @{ + */ +#define FLASH_BASE (0x08000000UL) /*!< FLASH(up to 1 MB) base address */ +#define FLASH_END (0x080FFFFFUL) /*!< FLASH END address */ +#define FLASH_BANK1_END (0x0807FFFFUL) /*!< FLASH END address of bank1 */ +#define FLASH_BANK2_END (0x080FFFFFUL) /*!< FLASH END address of bank2 */ +#define SRAM1_BASE (0x20000000UL) /*!< SRAM1(up to 256 KB) base address */ +#define SRAM2_BASE (0x10000000UL) /*!< SRAM2(64 KB) base address */ +#define PERIPH_BASE (0x40000000UL) /*!< Peripheral base address */ +#define FMC_BASE (0x60000000UL) /*!< FMC base address */ +#define QSPI_BASE (0x90000000UL) /*!< QUADSPI memories accessible over AHB base address */ + +#define FMC_R_BASE (0xA0000000UL) /*!< FMC control registers base address */ +#define QSPI_R_BASE (0xA0001000UL) /*!< QUADSPI control registers base address */ +#define SRAM1_BB_BASE (0x22000000UL) /*!< SRAM1(96 KB) base address in the bit-band region */ +#define PERIPH_BB_BASE (0x42000000UL) /*!< Peripheral base address in the bit-band region */ + +/* Legacy defines */ +#define SRAM_BASE SRAM1_BASE +#define SRAM_BB_BASE SRAM1_BB_BASE + +#define SRAM1_SIZE_MAX (0x00040000UL) /*!< maximum SRAM1 size (up to 256 KBytes) */ +#define SRAM2_SIZE (0x00010000UL) /*!< SRAM2 size (64 KBytes) */ + +#define FLASH_SIZE_DATA_REGISTER (0x1FFF75E0UL) + +#define FLASH_SIZE (((((*((uint32_t *)FLASH_SIZE_DATA_REGISTER)) & (0x0000FFFFU))== 0x0000FFFFU)) ? (0x400U << 10U) : \ + (((*((uint32_t *)FLASH_SIZE_DATA_REGISTER)) & (0x0000FFFFU)) << 10U)) + +/*!< Peripheral memory map */ +#define APB1PERIPH_BASE PERIPH_BASE +#define APB2PERIPH_BASE (PERIPH_BASE + 0x00010000UL) +#define AHB1PERIPH_BASE (PERIPH_BASE + 0x00020000UL) +#define AHB2PERIPH_BASE (PERIPH_BASE + 0x08000000UL) + +#define FMC_BANK1 FMC_BASE +#define FMC_BANK1_1 FMC_BANK1 +#define FMC_BANK1_2 (FMC_BANK1 + 0x04000000UL) +#define FMC_BANK1_3 (FMC_BANK1 + 0x08000000UL) +#define FMC_BANK1_4 (FMC_BANK1 + 0x0C000000UL) +#define FMC_BANK3 (FMC_BASE + 0x20000000UL) + +/*!< APB1 peripherals */ +#define TIM2_BASE (APB1PERIPH_BASE + 0x0000UL) +#define TIM3_BASE (APB1PERIPH_BASE + 0x0400UL) +#define TIM4_BASE (APB1PERIPH_BASE + 0x0800UL) +#define TIM5_BASE (APB1PERIPH_BASE + 0x0C00UL) +#define TIM6_BASE (APB1PERIPH_BASE + 0x1000UL) +#define TIM7_BASE (APB1PERIPH_BASE + 0x1400UL) +#define LCD_BASE (APB1PERIPH_BASE + 0x2400UL) +#define RTC_BASE (APB1PERIPH_BASE + 0x2800UL) +#define WWDG_BASE (APB1PERIPH_BASE + 0x2C00UL) +#define IWDG_BASE (APB1PERIPH_BASE + 0x3000UL) +#define SPI2_BASE (APB1PERIPH_BASE + 0x3800UL) +#define SPI3_BASE (APB1PERIPH_BASE + 0x3C00UL) +#define USART2_BASE (APB1PERIPH_BASE + 0x4400UL) +#define USART3_BASE (APB1PERIPH_BASE + 0x4800UL) +#define UART4_BASE (APB1PERIPH_BASE + 0x4C00UL) +#define UART5_BASE (APB1PERIPH_BASE + 0x5000UL) +#define I2C1_BASE (APB1PERIPH_BASE + 0x5400UL) +#define I2C2_BASE (APB1PERIPH_BASE + 0x5800UL) +#define I2C3_BASE (APB1PERIPH_BASE + 0x5C00UL) +#define CRS_BASE (APB1PERIPH_BASE + 0x6000UL) +#define CAN1_BASE (APB1PERIPH_BASE + 0x6400UL) +#define CAN2_BASE (APB1PERIPH_BASE + 0x6800UL) +#define I2C4_BASE (APB1PERIPH_BASE + 0x8400UL) +#define PWR_BASE (APB1PERIPH_BASE + 0x7000UL) +#define DAC_BASE (APB1PERIPH_BASE + 0x7400UL) +#define DAC1_BASE (APB1PERIPH_BASE + 0x7400UL) +#define OPAMP_BASE (APB1PERIPH_BASE + 0x7800UL) +#define OPAMP1_BASE (APB1PERIPH_BASE + 0x7800UL) +#define OPAMP2_BASE (APB1PERIPH_BASE + 0x7810UL) +#define LPTIM1_BASE (APB1PERIPH_BASE + 0x7C00UL) +#define LPUART1_BASE (APB1PERIPH_BASE + 0x8000UL) +#define SWPMI1_BASE (APB1PERIPH_BASE + 0x8800UL) +#define LPTIM2_BASE (APB1PERIPH_BASE + 0x9400UL) + + +/*!< APB2 peripherals */ +#define SYSCFG_BASE (APB2PERIPH_BASE + 0x0000UL) +#define VREFBUF_BASE (APB2PERIPH_BASE + 0x0030UL) +#define COMP1_BASE (APB2PERIPH_BASE + 0x0200UL) +#define COMP2_BASE (APB2PERIPH_BASE + 0x0204UL) +#define EXTI_BASE (APB2PERIPH_BASE + 0x0400UL) +#define FIREWALL_BASE (APB2PERIPH_BASE + 0x1C00UL) +#define SDMMC1_BASE (APB2PERIPH_BASE + 0x2800UL) +#define TIM1_BASE (APB2PERIPH_BASE + 0x2C00UL) +#define SPI1_BASE (APB2PERIPH_BASE + 0x3000UL) +#define TIM8_BASE (APB2PERIPH_BASE + 0x3400UL) +#define USART1_BASE (APB2PERIPH_BASE + 0x3800UL) +#define TIM15_BASE (APB2PERIPH_BASE + 0x4000UL) +#define TIM16_BASE (APB2PERIPH_BASE + 0x4400UL) +#define TIM17_BASE (APB2PERIPH_BASE + 0x4800UL) +#define SAI1_BASE (APB2PERIPH_BASE + 0x5400UL) +#define SAI1_Block_A_BASE (SAI1_BASE + 0x0004UL) +#define SAI1_Block_B_BASE (SAI1_BASE + 0x0024UL) +#define SAI2_BASE (APB2PERIPH_BASE + 0x5800UL) +#define SAI2_Block_A_BASE (SAI2_BASE + 0x0004UL) +#define SAI2_Block_B_BASE (SAI2_BASE + 0x0024UL) +#define DFSDM1_BASE (APB2PERIPH_BASE + 0x6000UL) +#define DFSDM1_Channel0_BASE (DFSDM1_BASE + 0x0000UL) +#define DFSDM1_Channel1_BASE (DFSDM1_BASE + 0x0020UL) +#define DFSDM1_Channel2_BASE (DFSDM1_BASE + 0x0040UL) +#define DFSDM1_Channel3_BASE (DFSDM1_BASE + 0x0060UL) +#define DFSDM1_Channel4_BASE (DFSDM1_BASE + 0x0080UL) +#define DFSDM1_Channel5_BASE (DFSDM1_BASE + 0x00A0UL) +#define DFSDM1_Channel6_BASE (DFSDM1_BASE + 0x00C0UL) +#define DFSDM1_Channel7_BASE (DFSDM1_BASE + 0x00E0UL) +#define DFSDM1_Filter0_BASE (DFSDM1_BASE + 0x0100UL) +#define DFSDM1_Filter1_BASE (DFSDM1_BASE + 0x0180UL) +#define DFSDM1_Filter2_BASE (DFSDM1_BASE + 0x0200UL) +#define DFSDM1_Filter3_BASE (DFSDM1_BASE + 0x0280UL) + +/*!< AHB1 peripherals */ +#define DMA1_BASE (AHB1PERIPH_BASE) +#define DMA2_BASE (AHB1PERIPH_BASE + 0x0400UL) +#define RCC_BASE (AHB1PERIPH_BASE + 0x1000UL) +#define FLASH_R_BASE (AHB1PERIPH_BASE + 0x2000UL) +#define CRC_BASE (AHB1PERIPH_BASE + 0x3000UL) +#define TSC_BASE (AHB1PERIPH_BASE + 0x4000UL) +#define DMA2D_BASE (AHB1PERIPH_BASE + 0xB000UL) + + +#define DMA1_Channel1_BASE (DMA1_BASE + 0x0008UL) +#define DMA1_Channel2_BASE (DMA1_BASE + 0x001CUL) +#define DMA1_Channel3_BASE (DMA1_BASE + 0x0030UL) +#define DMA1_Channel4_BASE (DMA1_BASE + 0x0044UL) +#define DMA1_Channel5_BASE (DMA1_BASE + 0x0058UL) +#define DMA1_Channel6_BASE (DMA1_BASE + 0x006CUL) +#define DMA1_Channel7_BASE (DMA1_BASE + 0x0080UL) +#define DMA1_CSELR_BASE (DMA1_BASE + 0x00A8UL) + + +#define DMA2_Channel1_BASE (DMA2_BASE + 0x0008UL) +#define DMA2_Channel2_BASE (DMA2_BASE + 0x001CUL) +#define DMA2_Channel3_BASE (DMA2_BASE + 0x0030UL) +#define DMA2_Channel4_BASE (DMA2_BASE + 0x0044UL) +#define DMA2_Channel5_BASE (DMA2_BASE + 0x0058UL) +#define DMA2_Channel6_BASE (DMA2_BASE + 0x006CUL) +#define DMA2_Channel7_BASE (DMA2_BASE + 0x0080UL) +#define DMA2_CSELR_BASE (DMA2_BASE + 0x00A8UL) + + +/*!< AHB2 peripherals */ +#define GPIOA_BASE (AHB2PERIPH_BASE + 0x0000UL) +#define GPIOB_BASE (AHB2PERIPH_BASE + 0x0400UL) +#define GPIOC_BASE (AHB2PERIPH_BASE + 0x0800UL) +#define GPIOD_BASE (AHB2PERIPH_BASE + 0x0C00UL) +#define GPIOE_BASE (AHB2PERIPH_BASE + 0x1000UL) +#define GPIOF_BASE (AHB2PERIPH_BASE + 0x1400UL) +#define GPIOG_BASE (AHB2PERIPH_BASE + 0x1800UL) +#define GPIOH_BASE (AHB2PERIPH_BASE + 0x1C00UL) +#define GPIOI_BASE (AHB2PERIPH_BASE + 0x2000UL) + +#define USBOTG_BASE (AHB2PERIPH_BASE + 0x08000000UL) + +#define ADC1_BASE (AHB2PERIPH_BASE + 0x08040000UL) +#define ADC2_BASE (AHB2PERIPH_BASE + 0x08040100UL) +#define ADC3_BASE (AHB2PERIPH_BASE + 0x08040200UL) +#define ADC123_COMMON_BASE (AHB2PERIPH_BASE + 0x08040300UL) + +#define DCMI_BASE (AHB2PERIPH_BASE + 0x08050000UL) + +#define RNG_BASE (AHB2PERIPH_BASE + 0x08060800UL) + + +/*!< FMC Banks registers base address */ +#define FMC_Bank1_R_BASE (FMC_R_BASE + 0x0000UL) +#define FMC_Bank1E_R_BASE (FMC_R_BASE + 0x0104UL) +#define FMC_Bank3_R_BASE (FMC_R_BASE + 0x0080UL) + +/* Debug MCU registers base address */ +#define DBGMCU_BASE (0xE0042000UL) + +/*!< USB registers base address */ +#define USB_OTG_FS_PERIPH_BASE (0x50000000UL) + +#define USB_OTG_GLOBAL_BASE (0x00000000UL) +#define USB_OTG_DEVICE_BASE (0x00000800UL) +#define USB_OTG_IN_ENDPOINT_BASE (0x00000900UL) +#define USB_OTG_OUT_ENDPOINT_BASE (0x00000B00UL) +#define USB_OTG_EP_REG_SIZE (0x00000020UL) +#define USB_OTG_HOST_BASE (0x00000400UL) +#define USB_OTG_HOST_PORT_BASE (0x00000440UL) +#define USB_OTG_HOST_CHANNEL_BASE (0x00000500UL) +#define USB_OTG_HOST_CHANNEL_SIZE (0x00000020UL) +#define USB_OTG_PCGCCTL_BASE (0x00000E00UL) +#define USB_OTG_FIFO_BASE (0x00001000UL) +#define USB_OTG_FIFO_SIZE (0x00001000UL) + + +#define PACKAGE_BASE (0x1FFF7500UL) /*!< Package data register base address */ +#define UID_BASE (0x1FFF7590UL) /*!< Unique device ID register base address */ +#define FLASHSIZE_BASE (0x1FFF75E0UL) /*!< Flash size data register base address */ +/** + * @} + */ + +/** @addtogroup Peripheral_declaration + * @{ + */ +#define TIM2 ((TIM_TypeDef *) TIM2_BASE) +#define TIM3 ((TIM_TypeDef *) TIM3_BASE) +#define TIM4 ((TIM_TypeDef *) TIM4_BASE) +#define TIM5 ((TIM_TypeDef *) TIM5_BASE) +#define TIM6 ((TIM_TypeDef *) TIM6_BASE) +#define TIM7 ((TIM_TypeDef *) TIM7_BASE) +#define LCD ((LCD_TypeDef *) LCD_BASE) +#define RTC ((RTC_TypeDef *) RTC_BASE) +#define WWDG ((WWDG_TypeDef *) WWDG_BASE) +#define IWDG ((IWDG_TypeDef *) IWDG_BASE) +#define SPI2 ((SPI_TypeDef *) SPI2_BASE) +#define SPI3 ((SPI_TypeDef *) SPI3_BASE) +#define USART2 ((USART_TypeDef *) USART2_BASE) +#define USART3 ((USART_TypeDef *) USART3_BASE) +#define UART4 ((USART_TypeDef *) UART4_BASE) +#define UART5 ((USART_TypeDef *) UART5_BASE) +#define I2C1 ((I2C_TypeDef *) I2C1_BASE) +#define I2C2 ((I2C_TypeDef *) I2C2_BASE) +#define I2C3 ((I2C_TypeDef *) I2C3_BASE) +#define CRS ((CRS_TypeDef *) CRS_BASE) +#define CAN ((CAN_TypeDef *) CAN1_BASE) +#define CAN1 ((CAN_TypeDef *) CAN1_BASE) +#define CAN2 ((CAN_TypeDef *) CAN2_BASE) +#define I2C4 ((I2C_TypeDef *) I2C4_BASE) +#define PWR ((PWR_TypeDef *) PWR_BASE) +#define DAC ((DAC_TypeDef *) DAC1_BASE) +#define DAC1 ((DAC_TypeDef *) DAC1_BASE) +#define OPAMP ((OPAMP_TypeDef *) OPAMP_BASE) +#define OPAMP1 ((OPAMP_TypeDef *) OPAMP1_BASE) +#define OPAMP2 ((OPAMP_TypeDef *) OPAMP2_BASE) +#define OPAMP12_COMMON ((OPAMP_Common_TypeDef *) OPAMP1_BASE) +#define LPTIM1 ((LPTIM_TypeDef *) LPTIM1_BASE) +#define LPUART1 ((USART_TypeDef *) LPUART1_BASE) +#define SWPMI1 ((SWPMI_TypeDef *) SWPMI1_BASE) +#define LPTIM2 ((LPTIM_TypeDef *) LPTIM2_BASE) + +#define SYSCFG ((SYSCFG_TypeDef *) SYSCFG_BASE) +#define VREFBUF ((VREFBUF_TypeDef *) VREFBUF_BASE) +#define COMP1 ((COMP_TypeDef *) COMP1_BASE) +#define COMP2 ((COMP_TypeDef *) COMP2_BASE) +#define COMP12_COMMON ((COMP_Common_TypeDef *) COMP2_BASE) +#define EXTI ((EXTI_TypeDef *) EXTI_BASE) +#define FIREWALL ((FIREWALL_TypeDef *) FIREWALL_BASE) +#define SDMMC1 ((SDMMC_TypeDef *) SDMMC1_BASE) +#define TIM1 ((TIM_TypeDef *) TIM1_BASE) +#define SPI1 ((SPI_TypeDef *) SPI1_BASE) +#define TIM8 ((TIM_TypeDef *) TIM8_BASE) +#define USART1 ((USART_TypeDef *) USART1_BASE) +#define TIM15 ((TIM_TypeDef *) TIM15_BASE) +#define TIM16 ((TIM_TypeDef *) TIM16_BASE) +#define TIM17 ((TIM_TypeDef *) TIM17_BASE) +#define SAI1 ((SAI_TypeDef *) SAI1_BASE) +#define SAI1_Block_A ((SAI_Block_TypeDef *)SAI1_Block_A_BASE) +#define SAI1_Block_B ((SAI_Block_TypeDef *)SAI1_Block_B_BASE) +#define SAI2 ((SAI_TypeDef *) SAI2_BASE) +#define SAI2_Block_A ((SAI_Block_TypeDef *)SAI2_Block_A_BASE) +#define SAI2_Block_B ((SAI_Block_TypeDef *)SAI2_Block_B_BASE) +#define DFSDM1_Channel0 ((DFSDM_Channel_TypeDef *) DFSDM1_Channel0_BASE) +#define DFSDM1_Channel1 ((DFSDM_Channel_TypeDef *) DFSDM1_Channel1_BASE) +#define DFSDM1_Channel2 ((DFSDM_Channel_TypeDef *) DFSDM1_Channel2_BASE) +#define DFSDM1_Channel3 ((DFSDM_Channel_TypeDef *) DFSDM1_Channel3_BASE) +#define DFSDM1_Channel4 ((DFSDM_Channel_TypeDef *) DFSDM1_Channel4_BASE) +#define DFSDM1_Channel5 ((DFSDM_Channel_TypeDef *) DFSDM1_Channel5_BASE) +#define DFSDM1_Channel6 ((DFSDM_Channel_TypeDef *) DFSDM1_Channel6_BASE) +#define DFSDM1_Channel7 ((DFSDM_Channel_TypeDef *) DFSDM1_Channel7_BASE) +#define DFSDM1_Filter0 ((DFSDM_Filter_TypeDef *) DFSDM1_Filter0_BASE) +#define DFSDM1_Filter1 ((DFSDM_Filter_TypeDef *) DFSDM1_Filter1_BASE) +#define DFSDM1_Filter2 ((DFSDM_Filter_TypeDef *) DFSDM1_Filter2_BASE) +#define DFSDM1_Filter3 ((DFSDM_Filter_TypeDef *) DFSDM1_Filter3_BASE) +/* Aliases to keep compatibility after DFSDM renaming */ +#define DFSDM_Channel0 DFSDM1_Channel0 +#define DFSDM_Channel1 DFSDM1_Channel1 +#define DFSDM_Channel2 DFSDM1_Channel2 +#define DFSDM_Channel3 DFSDM1_Channel3 +#define DFSDM_Channel4 DFSDM1_Channel4 +#define DFSDM_Channel5 DFSDM1_Channel5 +#define DFSDM_Channel6 DFSDM1_Channel6 +#define DFSDM_Channel7 DFSDM1_Channel7 +#define DFSDM_Filter0 DFSDM1_Filter0 +#define DFSDM_Filter1 DFSDM1_Filter1 +#define DFSDM_Filter2 DFSDM1_Filter2 +#define DFSDM_Filter3 DFSDM1_Filter3 +#define DMA1 ((DMA_TypeDef *) DMA1_BASE) +#define DMA2 ((DMA_TypeDef *) DMA2_BASE) +#define RCC ((RCC_TypeDef *) RCC_BASE) +#define FLASH ((FLASH_TypeDef *) FLASH_R_BASE) +#define CRC ((CRC_TypeDef *) CRC_BASE) +#define TSC ((TSC_TypeDef *) TSC_BASE) + +#define GPIOA ((GPIO_TypeDef *) GPIOA_BASE) +#define GPIOB ((GPIO_TypeDef *) GPIOB_BASE) +#define GPIOC ((GPIO_TypeDef *) GPIOC_BASE) +#define GPIOD ((GPIO_TypeDef *) GPIOD_BASE) +#define GPIOE ((GPIO_TypeDef *) GPIOE_BASE) +#define GPIOF ((GPIO_TypeDef *) GPIOF_BASE) +#define GPIOG ((GPIO_TypeDef *) GPIOG_BASE) +#define GPIOH ((GPIO_TypeDef *) GPIOH_BASE) +#define GPIOI ((GPIO_TypeDef *) GPIOI_BASE) +#define ADC1 ((ADC_TypeDef *) ADC1_BASE) +#define ADC2 ((ADC_TypeDef *) ADC2_BASE) +#define ADC3 ((ADC_TypeDef *) ADC3_BASE) +#define ADC123_COMMON ((ADC_Common_TypeDef *) ADC123_COMMON_BASE) +#define DCMI ((DCMI_TypeDef *) DCMI_BASE) +#define DMA2D ((DMA2D_TypeDef *)DMA2D_BASE) +#define RNG ((RNG_TypeDef *) RNG_BASE) + + +#define DMA1_Channel1 ((DMA_Channel_TypeDef *) DMA1_Channel1_BASE) +#define DMA1_Channel2 ((DMA_Channel_TypeDef *) DMA1_Channel2_BASE) +#define DMA1_Channel3 ((DMA_Channel_TypeDef *) DMA1_Channel3_BASE) +#define DMA1_Channel4 ((DMA_Channel_TypeDef *) DMA1_Channel4_BASE) +#define DMA1_Channel5 ((DMA_Channel_TypeDef *) DMA1_Channel5_BASE) +#define DMA1_Channel6 ((DMA_Channel_TypeDef *) DMA1_Channel6_BASE) +#define DMA1_Channel7 ((DMA_Channel_TypeDef *) DMA1_Channel7_BASE) +#define DMA1_CSELR ((DMA_Request_TypeDef *) DMA1_CSELR_BASE) + + +#define DMA2_Channel1 ((DMA_Channel_TypeDef *) DMA2_Channel1_BASE) +#define DMA2_Channel2 ((DMA_Channel_TypeDef *) DMA2_Channel2_BASE) +#define DMA2_Channel3 ((DMA_Channel_TypeDef *) DMA2_Channel3_BASE) +#define DMA2_Channel4 ((DMA_Channel_TypeDef *) DMA2_Channel4_BASE) +#define DMA2_Channel5 ((DMA_Channel_TypeDef *) DMA2_Channel5_BASE) +#define DMA2_Channel6 ((DMA_Channel_TypeDef *) DMA2_Channel6_BASE) +#define DMA2_Channel7 ((DMA_Channel_TypeDef *) DMA2_Channel7_BASE) +#define DMA2_CSELR ((DMA_Request_TypeDef *) DMA2_CSELR_BASE) + + +#define FMC_Bank1_R ((FMC_Bank1_TypeDef *) FMC_Bank1_R_BASE) +#define FMC_Bank1E_R ((FMC_Bank1E_TypeDef *) FMC_Bank1E_R_BASE) +#define FMC_Bank3_R ((FMC_Bank3_TypeDef *) FMC_Bank3_R_BASE) + +#define QUADSPI ((QUADSPI_TypeDef *) QSPI_R_BASE) + +#define DBGMCU ((DBGMCU_TypeDef *) DBGMCU_BASE) + +#define USB_OTG_FS ((USB_OTG_GlobalTypeDef *) USB_OTG_FS_PERIPH_BASE) +/** + * @} + */ + +/** @addtogroup Exported_constants + * @{ + */ + +/** @addtogroup Hardware_Constant_Definition + * @{ + */ +#define LSI_STARTUP_TIME 130U /*!< LSI Maximum startup time in us */ + +/** + * @} + */ + +/** @addtogroup Peripheral_Registers_Bits_Definition + * @{ + */ + +/******************************************************************************/ +/* Peripheral Registers_Bits_Definition */ +/******************************************************************************/ + +/******************************************************************************/ +/* */ +/* Analog to Digital Converter */ +/* */ +/******************************************************************************/ + +/* + * @brief Specific device feature definitions (not present on all devices in the STM32L4 series) + */ +#define ADC_MULTIMODE_SUPPORT /*!< ADC feature available only on specific devices: multimode available on devices with several ADC instances */ + +/******************** Bit definition for ADC_ISR register *******************/ +#define ADC_ISR_ADRDY_Pos (0U) +#define ADC_ISR_ADRDY_Msk (0x1UL << ADC_ISR_ADRDY_Pos) /*!< 0x00000001 */ +#define ADC_ISR_ADRDY ADC_ISR_ADRDY_Msk /*!< ADC ready flag */ +#define ADC_ISR_EOSMP_Pos (1U) +#define ADC_ISR_EOSMP_Msk (0x1UL << ADC_ISR_EOSMP_Pos) /*!< 0x00000002 */ +#define ADC_ISR_EOSMP ADC_ISR_EOSMP_Msk /*!< ADC group regular end of sampling flag */ +#define ADC_ISR_EOC_Pos (2U) +#define ADC_ISR_EOC_Msk (0x1UL << ADC_ISR_EOC_Pos) /*!< 0x00000004 */ +#define ADC_ISR_EOC ADC_ISR_EOC_Msk /*!< ADC group regular end of unitary conversion flag */ +#define ADC_ISR_EOS_Pos (3U) +#define ADC_ISR_EOS_Msk (0x1UL << ADC_ISR_EOS_Pos) /*!< 0x00000008 */ +#define ADC_ISR_EOS ADC_ISR_EOS_Msk /*!< ADC group regular end of sequence conversions flag */ +#define ADC_ISR_OVR_Pos (4U) +#define ADC_ISR_OVR_Msk (0x1UL << ADC_ISR_OVR_Pos) /*!< 0x00000010 */ +#define ADC_ISR_OVR ADC_ISR_OVR_Msk /*!< ADC group regular overrun flag */ +#define ADC_ISR_JEOC_Pos (5U) +#define ADC_ISR_JEOC_Msk (0x1UL << ADC_ISR_JEOC_Pos) /*!< 0x00000020 */ +#define ADC_ISR_JEOC ADC_ISR_JEOC_Msk /*!< ADC group injected end of unitary conversion flag */ +#define ADC_ISR_JEOS_Pos (6U) +#define ADC_ISR_JEOS_Msk (0x1UL << ADC_ISR_JEOS_Pos) /*!< 0x00000040 */ +#define ADC_ISR_JEOS ADC_ISR_JEOS_Msk /*!< ADC group injected end of sequence conversions flag */ +#define ADC_ISR_AWD1_Pos (7U) +#define ADC_ISR_AWD1_Msk (0x1UL << ADC_ISR_AWD1_Pos) /*!< 0x00000080 */ +#define ADC_ISR_AWD1 ADC_ISR_AWD1_Msk /*!< ADC analog watchdog 1 flag */ +#define ADC_ISR_AWD2_Pos (8U) +#define ADC_ISR_AWD2_Msk (0x1UL << ADC_ISR_AWD2_Pos) /*!< 0x00000100 */ +#define ADC_ISR_AWD2 ADC_ISR_AWD2_Msk /*!< ADC analog watchdog 2 flag */ +#define ADC_ISR_AWD3_Pos (9U) +#define ADC_ISR_AWD3_Msk (0x1UL << ADC_ISR_AWD3_Pos) /*!< 0x00000200 */ +#define ADC_ISR_AWD3 ADC_ISR_AWD3_Msk /*!< ADC analog watchdog 3 flag */ +#define ADC_ISR_JQOVF_Pos (10U) +#define ADC_ISR_JQOVF_Msk (0x1UL << ADC_ISR_JQOVF_Pos) /*!< 0x00000400 */ +#define ADC_ISR_JQOVF ADC_ISR_JQOVF_Msk /*!< ADC group injected contexts queue overflow flag */ + +/******************** Bit definition for ADC_IER register *******************/ +#define ADC_IER_ADRDYIE_Pos (0U) +#define ADC_IER_ADRDYIE_Msk (0x1UL << ADC_IER_ADRDYIE_Pos) /*!< 0x00000001 */ +#define ADC_IER_ADRDYIE ADC_IER_ADRDYIE_Msk /*!< ADC ready interrupt */ +#define ADC_IER_EOSMPIE_Pos (1U) +#define ADC_IER_EOSMPIE_Msk (0x1UL << ADC_IER_EOSMPIE_Pos) /*!< 0x00000002 */ +#define ADC_IER_EOSMPIE ADC_IER_EOSMPIE_Msk /*!< ADC group regular end of sampling interrupt */ +#define ADC_IER_EOCIE_Pos (2U) +#define ADC_IER_EOCIE_Msk (0x1UL << ADC_IER_EOCIE_Pos) /*!< 0x00000004 */ +#define ADC_IER_EOCIE ADC_IER_EOCIE_Msk /*!< ADC group regular end of unitary conversion interrupt */ +#define ADC_IER_EOSIE_Pos (3U) +#define ADC_IER_EOSIE_Msk (0x1UL << ADC_IER_EOSIE_Pos) /*!< 0x00000008 */ +#define ADC_IER_EOSIE ADC_IER_EOSIE_Msk /*!< ADC group regular end of sequence conversions interrupt */ +#define ADC_IER_OVRIE_Pos (4U) +#define ADC_IER_OVRIE_Msk (0x1UL << ADC_IER_OVRIE_Pos) /*!< 0x00000010 */ +#define ADC_IER_OVRIE ADC_IER_OVRIE_Msk /*!< ADC group regular overrun interrupt */ +#define ADC_IER_JEOCIE_Pos (5U) +#define ADC_IER_JEOCIE_Msk (0x1UL << ADC_IER_JEOCIE_Pos) /*!< 0x00000020 */ +#define ADC_IER_JEOCIE ADC_IER_JEOCIE_Msk /*!< ADC group injected end of unitary conversion interrupt */ +#define ADC_IER_JEOSIE_Pos (6U) +#define ADC_IER_JEOSIE_Msk (0x1UL << ADC_IER_JEOSIE_Pos) /*!< 0x00000040 */ +#define ADC_IER_JEOSIE ADC_IER_JEOSIE_Msk /*!< ADC group injected end of sequence conversions interrupt */ +#define ADC_IER_AWD1IE_Pos (7U) +#define ADC_IER_AWD1IE_Msk (0x1UL << ADC_IER_AWD1IE_Pos) /*!< 0x00000080 */ +#define ADC_IER_AWD1IE ADC_IER_AWD1IE_Msk /*!< ADC analog watchdog 1 interrupt */ +#define ADC_IER_AWD2IE_Pos (8U) +#define ADC_IER_AWD2IE_Msk (0x1UL << ADC_IER_AWD2IE_Pos) /*!< 0x00000100 */ +#define ADC_IER_AWD2IE ADC_IER_AWD2IE_Msk /*!< ADC analog watchdog 2 interrupt */ +#define ADC_IER_AWD3IE_Pos (9U) +#define ADC_IER_AWD3IE_Msk (0x1UL << ADC_IER_AWD3IE_Pos) /*!< 0x00000200 */ +#define ADC_IER_AWD3IE ADC_IER_AWD3IE_Msk /*!< ADC analog watchdog 3 interrupt */ +#define ADC_IER_JQOVFIE_Pos (10U) +#define ADC_IER_JQOVFIE_Msk (0x1UL << ADC_IER_JQOVFIE_Pos) /*!< 0x00000400 */ +#define ADC_IER_JQOVFIE ADC_IER_JQOVFIE_Msk /*!< ADC group injected contexts queue overflow interrupt */ + +/* Legacy defines */ +#define ADC_IER_ADRDY (ADC_IER_ADRDYIE) +#define ADC_IER_EOSMP (ADC_IER_EOSMPIE) +#define ADC_IER_EOC (ADC_IER_EOCIE) +#define ADC_IER_EOS (ADC_IER_EOSIE) +#define ADC_IER_OVR (ADC_IER_OVRIE) +#define ADC_IER_JEOC (ADC_IER_JEOCIE) +#define ADC_IER_JEOS (ADC_IER_JEOSIE) +#define ADC_IER_AWD1 (ADC_IER_AWD1IE) +#define ADC_IER_AWD2 (ADC_IER_AWD2IE) +#define ADC_IER_AWD3 (ADC_IER_AWD3IE) +#define ADC_IER_JQOVF (ADC_IER_JQOVFIE) + +/******************** Bit definition for ADC_CR register ********************/ +#define ADC_CR_ADEN_Pos (0U) +#define ADC_CR_ADEN_Msk (0x1UL << ADC_CR_ADEN_Pos) /*!< 0x00000001 */ +#define ADC_CR_ADEN ADC_CR_ADEN_Msk /*!< ADC enable */ +#define ADC_CR_ADDIS_Pos (1U) +#define ADC_CR_ADDIS_Msk (0x1UL << ADC_CR_ADDIS_Pos) /*!< 0x00000002 */ +#define ADC_CR_ADDIS ADC_CR_ADDIS_Msk /*!< ADC disable */ +#define ADC_CR_ADSTART_Pos (2U) +#define ADC_CR_ADSTART_Msk (0x1UL << ADC_CR_ADSTART_Pos) /*!< 0x00000004 */ +#define ADC_CR_ADSTART ADC_CR_ADSTART_Msk /*!< ADC group regular conversion start */ +#define ADC_CR_JADSTART_Pos (3U) +#define ADC_CR_JADSTART_Msk (0x1UL << ADC_CR_JADSTART_Pos) /*!< 0x00000008 */ +#define ADC_CR_JADSTART ADC_CR_JADSTART_Msk /*!< ADC group injected conversion start */ +#define ADC_CR_ADSTP_Pos (4U) +#define ADC_CR_ADSTP_Msk (0x1UL << ADC_CR_ADSTP_Pos) /*!< 0x00000010 */ +#define ADC_CR_ADSTP ADC_CR_ADSTP_Msk /*!< ADC group regular conversion stop */ +#define ADC_CR_JADSTP_Pos (5U) +#define ADC_CR_JADSTP_Msk (0x1UL << ADC_CR_JADSTP_Pos) /*!< 0x00000020 */ +#define ADC_CR_JADSTP ADC_CR_JADSTP_Msk /*!< ADC group injected conversion stop */ +#define ADC_CR_ADVREGEN_Pos (28U) +#define ADC_CR_ADVREGEN_Msk (0x1UL << ADC_CR_ADVREGEN_Pos) /*!< 0x10000000 */ +#define ADC_CR_ADVREGEN ADC_CR_ADVREGEN_Msk /*!< ADC voltage regulator enable */ +#define ADC_CR_DEEPPWD_Pos (29U) +#define ADC_CR_DEEPPWD_Msk (0x1UL << ADC_CR_DEEPPWD_Pos) /*!< 0x20000000 */ +#define ADC_CR_DEEPPWD ADC_CR_DEEPPWD_Msk /*!< ADC deep power down enable */ +#define ADC_CR_ADCALDIF_Pos (30U) +#define ADC_CR_ADCALDIF_Msk (0x1UL << ADC_CR_ADCALDIF_Pos) /*!< 0x40000000 */ +#define ADC_CR_ADCALDIF ADC_CR_ADCALDIF_Msk /*!< ADC differential mode for calibration */ +#define ADC_CR_ADCAL_Pos (31U) +#define ADC_CR_ADCAL_Msk (0x1UL << ADC_CR_ADCAL_Pos) /*!< 0x80000000 */ +#define ADC_CR_ADCAL ADC_CR_ADCAL_Msk /*!< ADC calibration */ + +/******************** Bit definition for ADC_CFGR register ******************/ +#define ADC_CFGR_DMAEN_Pos (0U) +#define ADC_CFGR_DMAEN_Msk (0x1UL << ADC_CFGR_DMAEN_Pos) /*!< 0x00000001 */ +#define ADC_CFGR_DMAEN ADC_CFGR_DMAEN_Msk /*!< ADC DMA transfer enable */ +#define ADC_CFGR_DMACFG_Pos (1U) +#define ADC_CFGR_DMACFG_Msk (0x1UL << ADC_CFGR_DMACFG_Pos) /*!< 0x00000002 */ +#define ADC_CFGR_DMACFG ADC_CFGR_DMACFG_Msk /*!< ADC DMA transfer configuration */ + +#define ADC_CFGR_DFSDMCFG_Pos (2U) +#define ADC_CFGR_DFSDMCFG_Msk (0x1UL << ADC_CFGR_DFSDMCFG_Pos) /*!< 0x00000004 */ +#define ADC_CFGR_DFSDMCFG ADC_CFGR_DFSDMCFG_Msk /*!< ADC DFSDM mode configuration */ + +#define ADC_CFGR_RES_Pos (3U) +#define ADC_CFGR_RES_Msk (0x3UL << ADC_CFGR_RES_Pos) /*!< 0x00000018 */ +#define ADC_CFGR_RES ADC_CFGR_RES_Msk /*!< ADC data resolution */ +#define ADC_CFGR_RES_0 (0x1UL << ADC_CFGR_RES_Pos) /*!< 0x00000008 */ +#define ADC_CFGR_RES_1 (0x2UL << ADC_CFGR_RES_Pos) /*!< 0x00000010 */ + +#define ADC_CFGR_ALIGN_Pos (5U) +#define ADC_CFGR_ALIGN_Msk (0x1UL << ADC_CFGR_ALIGN_Pos) /*!< 0x00000020 */ +#define ADC_CFGR_ALIGN ADC_CFGR_ALIGN_Msk /*!< ADC data alignment */ + +#define ADC_CFGR_EXTSEL_Pos (6U) +#define ADC_CFGR_EXTSEL_Msk (0xFUL << ADC_CFGR_EXTSEL_Pos) /*!< 0x000003C0 */ +#define ADC_CFGR_EXTSEL ADC_CFGR_EXTSEL_Msk /*!< ADC group regular external trigger source */ +#define ADC_CFGR_EXTSEL_0 (0x1UL << ADC_CFGR_EXTSEL_Pos) /*!< 0x00000040 */ +#define ADC_CFGR_EXTSEL_1 (0x2UL << ADC_CFGR_EXTSEL_Pos) /*!< 0x00000080 */ +#define ADC_CFGR_EXTSEL_2 (0x4UL << ADC_CFGR_EXTSEL_Pos) /*!< 0x00000100 */ +#define ADC_CFGR_EXTSEL_3 (0x8UL << ADC_CFGR_EXTSEL_Pos) /*!< 0x00000200 */ + +#define ADC_CFGR_EXTEN_Pos (10U) +#define ADC_CFGR_EXTEN_Msk (0x3UL << ADC_CFGR_EXTEN_Pos) /*!< 0x00000C00 */ +#define ADC_CFGR_EXTEN ADC_CFGR_EXTEN_Msk /*!< ADC group regular external trigger polarity */ +#define ADC_CFGR_EXTEN_0 (0x1UL << ADC_CFGR_EXTEN_Pos) /*!< 0x00000400 */ +#define ADC_CFGR_EXTEN_1 (0x2UL << ADC_CFGR_EXTEN_Pos) /*!< 0x00000800 */ + +#define ADC_CFGR_OVRMOD_Pos (12U) +#define ADC_CFGR_OVRMOD_Msk (0x1UL << ADC_CFGR_OVRMOD_Pos) /*!< 0x00001000 */ +#define ADC_CFGR_OVRMOD ADC_CFGR_OVRMOD_Msk /*!< ADC group regular overrun configuration */ +#define ADC_CFGR_CONT_Pos (13U) +#define ADC_CFGR_CONT_Msk (0x1UL << ADC_CFGR_CONT_Pos) /*!< 0x00002000 */ +#define ADC_CFGR_CONT ADC_CFGR_CONT_Msk /*!< ADC group regular continuous conversion mode */ +#define ADC_CFGR_AUTDLY_Pos (14U) +#define ADC_CFGR_AUTDLY_Msk (0x1UL << ADC_CFGR_AUTDLY_Pos) /*!< 0x00004000 */ +#define ADC_CFGR_AUTDLY ADC_CFGR_AUTDLY_Msk /*!< ADC low power auto wait */ + +#define ADC_CFGR_DISCEN_Pos (16U) +#define ADC_CFGR_DISCEN_Msk (0x1UL << ADC_CFGR_DISCEN_Pos) /*!< 0x00010000 */ +#define ADC_CFGR_DISCEN ADC_CFGR_DISCEN_Msk /*!< ADC group regular sequencer discontinuous mode */ + +#define ADC_CFGR_DISCNUM_Pos (17U) +#define ADC_CFGR_DISCNUM_Msk (0x7UL << ADC_CFGR_DISCNUM_Pos) /*!< 0x000E0000 */ +#define ADC_CFGR_DISCNUM ADC_CFGR_DISCNUM_Msk /*!< ADC group regular sequencer discontinuous number of ranks */ +#define ADC_CFGR_DISCNUM_0 (0x1UL << ADC_CFGR_DISCNUM_Pos) /*!< 0x00020000 */ +#define ADC_CFGR_DISCNUM_1 (0x2UL << ADC_CFGR_DISCNUM_Pos) /*!< 0x00040000 */ +#define ADC_CFGR_DISCNUM_2 (0x4UL << ADC_CFGR_DISCNUM_Pos) /*!< 0x00080000 */ + +#define ADC_CFGR_JDISCEN_Pos (20U) +#define ADC_CFGR_JDISCEN_Msk (0x1UL << ADC_CFGR_JDISCEN_Pos) /*!< 0x00100000 */ +#define ADC_CFGR_JDISCEN ADC_CFGR_JDISCEN_Msk /*!< ADC group injected sequencer discontinuous mode */ +#define ADC_CFGR_JQM_Pos (21U) +#define ADC_CFGR_JQM_Msk (0x1UL << ADC_CFGR_JQM_Pos) /*!< 0x00200000 */ +#define ADC_CFGR_JQM ADC_CFGR_JQM_Msk /*!< ADC group injected contexts queue mode */ +#define ADC_CFGR_AWD1SGL_Pos (22U) +#define ADC_CFGR_AWD1SGL_Msk (0x1UL << ADC_CFGR_AWD1SGL_Pos) /*!< 0x00400000 */ +#define ADC_CFGR_AWD1SGL ADC_CFGR_AWD1SGL_Msk /*!< ADC analog watchdog 1 monitoring a single channel or all channels */ +#define ADC_CFGR_AWD1EN_Pos (23U) +#define ADC_CFGR_AWD1EN_Msk (0x1UL << ADC_CFGR_AWD1EN_Pos) /*!< 0x00800000 */ +#define ADC_CFGR_AWD1EN ADC_CFGR_AWD1EN_Msk /*!< ADC analog watchdog 1 enable on scope ADC group regular */ +#define ADC_CFGR_JAWD1EN_Pos (24U) +#define ADC_CFGR_JAWD1EN_Msk (0x1UL << ADC_CFGR_JAWD1EN_Pos) /*!< 0x01000000 */ +#define ADC_CFGR_JAWD1EN ADC_CFGR_JAWD1EN_Msk /*!< ADC analog watchdog 1 enable on scope ADC group injected */ +#define ADC_CFGR_JAUTO_Pos (25U) +#define ADC_CFGR_JAUTO_Msk (0x1UL << ADC_CFGR_JAUTO_Pos) /*!< 0x02000000 */ +#define ADC_CFGR_JAUTO ADC_CFGR_JAUTO_Msk /*!< ADC group injected automatic trigger mode */ + +#define ADC_CFGR_AWD1CH_Pos (26U) +#define ADC_CFGR_AWD1CH_Msk (0x1FUL << ADC_CFGR_AWD1CH_Pos) /*!< 0x7C000000 */ +#define ADC_CFGR_AWD1CH ADC_CFGR_AWD1CH_Msk /*!< ADC analog watchdog 1 monitored channel selection */ +#define ADC_CFGR_AWD1CH_0 (0x01UL << ADC_CFGR_AWD1CH_Pos) /*!< 0x04000000 */ +#define ADC_CFGR_AWD1CH_1 (0x02UL << ADC_CFGR_AWD1CH_Pos) /*!< 0x08000000 */ +#define ADC_CFGR_AWD1CH_2 (0x04UL << ADC_CFGR_AWD1CH_Pos) /*!< 0x10000000 */ +#define ADC_CFGR_AWD1CH_3 (0x08UL << ADC_CFGR_AWD1CH_Pos) /*!< 0x20000000 */ +#define ADC_CFGR_AWD1CH_4 (0x10UL << ADC_CFGR_AWD1CH_Pos) /*!< 0x40000000 */ + +#define ADC_CFGR_JQDIS_Pos (31U) +#define ADC_CFGR_JQDIS_Msk (0x1UL << ADC_CFGR_JQDIS_Pos) /*!< 0x80000000 */ +#define ADC_CFGR_JQDIS ADC_CFGR_JQDIS_Msk /*!< ADC group injected contexts queue disable */ + +/******************** Bit definition for ADC_CFGR2 register *****************/ +#define ADC_CFGR2_ROVSE_Pos (0U) +#define ADC_CFGR2_ROVSE_Msk (0x1UL << ADC_CFGR2_ROVSE_Pos) /*!< 0x00000001 */ +#define ADC_CFGR2_ROVSE ADC_CFGR2_ROVSE_Msk /*!< ADC oversampler enable on scope ADC group regular */ +#define ADC_CFGR2_JOVSE_Pos (1U) +#define ADC_CFGR2_JOVSE_Msk (0x1UL << ADC_CFGR2_JOVSE_Pos) /*!< 0x00000002 */ +#define ADC_CFGR2_JOVSE ADC_CFGR2_JOVSE_Msk /*!< ADC oversampler enable on scope ADC group injected */ + +#define ADC_CFGR2_OVSR_Pos (2U) +#define ADC_CFGR2_OVSR_Msk (0x7UL << ADC_CFGR2_OVSR_Pos) /*!< 0x0000001C */ +#define ADC_CFGR2_OVSR ADC_CFGR2_OVSR_Msk /*!< ADC oversampling ratio */ +#define ADC_CFGR2_OVSR_0 (0x1UL << ADC_CFGR2_OVSR_Pos) /*!< 0x00000004 */ +#define ADC_CFGR2_OVSR_1 (0x2UL << ADC_CFGR2_OVSR_Pos) /*!< 0x00000008 */ +#define ADC_CFGR2_OVSR_2 (0x4UL << ADC_CFGR2_OVSR_Pos) /*!< 0x00000010 */ + +#define ADC_CFGR2_OVSS_Pos (5U) +#define ADC_CFGR2_OVSS_Msk (0xFUL << ADC_CFGR2_OVSS_Pos) /*!< 0x000001E0 */ +#define ADC_CFGR2_OVSS ADC_CFGR2_OVSS_Msk /*!< ADC oversampling shift */ +#define ADC_CFGR2_OVSS_0 (0x1UL << ADC_CFGR2_OVSS_Pos) /*!< 0x00000020 */ +#define ADC_CFGR2_OVSS_1 (0x2UL << ADC_CFGR2_OVSS_Pos) /*!< 0x00000040 */ +#define ADC_CFGR2_OVSS_2 (0x4UL << ADC_CFGR2_OVSS_Pos) /*!< 0x00000080 */ +#define ADC_CFGR2_OVSS_3 (0x8UL << ADC_CFGR2_OVSS_Pos) /*!< 0x00000100 */ + +#define ADC_CFGR2_TROVS_Pos (9U) +#define ADC_CFGR2_TROVS_Msk (0x1UL << ADC_CFGR2_TROVS_Pos) /*!< 0x00000200 */ +#define ADC_CFGR2_TROVS ADC_CFGR2_TROVS_Msk /*!< ADC oversampling discontinuous mode (triggered mode) for ADC group regular */ +#define ADC_CFGR2_ROVSM_Pos (10U) +#define ADC_CFGR2_ROVSM_Msk (0x1UL << ADC_CFGR2_ROVSM_Pos) /*!< 0x00000400 */ +#define ADC_CFGR2_ROVSM ADC_CFGR2_ROVSM_Msk /*!< ADC oversampling mode managing interlaced conversions of ADC group regular and group injected */ + +/******************** Bit definition for ADC_SMPR1 register *****************/ +#define ADC_SMPR1_SMP0_Pos (0U) +#define ADC_SMPR1_SMP0_Msk (0x7UL << ADC_SMPR1_SMP0_Pos) /*!< 0x00000007 */ +#define ADC_SMPR1_SMP0 ADC_SMPR1_SMP0_Msk /*!< ADC channel 0 sampling time selection */ +#define ADC_SMPR1_SMP0_0 (0x1UL << ADC_SMPR1_SMP0_Pos) /*!< 0x00000001 */ +#define ADC_SMPR1_SMP0_1 (0x2UL << ADC_SMPR1_SMP0_Pos) /*!< 0x00000002 */ +#define ADC_SMPR1_SMP0_2 (0x4UL << ADC_SMPR1_SMP0_Pos) /*!< 0x00000004 */ + +#define ADC_SMPR1_SMP1_Pos (3U) +#define ADC_SMPR1_SMP1_Msk (0x7UL << ADC_SMPR1_SMP1_Pos) /*!< 0x00000038 */ +#define ADC_SMPR1_SMP1 ADC_SMPR1_SMP1_Msk /*!< ADC channel 1 sampling time selection */ +#define ADC_SMPR1_SMP1_0 (0x1UL << ADC_SMPR1_SMP1_Pos) /*!< 0x00000008 */ +#define ADC_SMPR1_SMP1_1 (0x2UL << ADC_SMPR1_SMP1_Pos) /*!< 0x00000010 */ +#define ADC_SMPR1_SMP1_2 (0x4UL << ADC_SMPR1_SMP1_Pos) /*!< 0x00000020 */ + +#define ADC_SMPR1_SMP2_Pos (6U) +#define ADC_SMPR1_SMP2_Msk (0x7UL << ADC_SMPR1_SMP2_Pos) /*!< 0x000001C0 */ +#define ADC_SMPR1_SMP2 ADC_SMPR1_SMP2_Msk /*!< ADC channel 2 sampling time selection */ +#define ADC_SMPR1_SMP2_0 (0x1UL << ADC_SMPR1_SMP2_Pos) /*!< 0x00000040 */ +#define ADC_SMPR1_SMP2_1 (0x2UL << ADC_SMPR1_SMP2_Pos) /*!< 0x00000080 */ +#define ADC_SMPR1_SMP2_2 (0x4UL << ADC_SMPR1_SMP2_Pos) /*!< 0x00000100 */ + +#define ADC_SMPR1_SMP3_Pos (9U) +#define ADC_SMPR1_SMP3_Msk (0x7UL << ADC_SMPR1_SMP3_Pos) /*!< 0x00000E00 */ +#define ADC_SMPR1_SMP3 ADC_SMPR1_SMP3_Msk /*!< ADC channel 3 sampling time selection */ +#define ADC_SMPR1_SMP3_0 (0x1UL << ADC_SMPR1_SMP3_Pos) /*!< 0x00000200 */ +#define ADC_SMPR1_SMP3_1 (0x2UL << ADC_SMPR1_SMP3_Pos) /*!< 0x00000400 */ +#define ADC_SMPR1_SMP3_2 (0x4UL << ADC_SMPR1_SMP3_Pos) /*!< 0x00000800 */ + +#define ADC_SMPR1_SMP4_Pos (12U) +#define ADC_SMPR1_SMP4_Msk (0x7UL << ADC_SMPR1_SMP4_Pos) /*!< 0x00007000 */ +#define ADC_SMPR1_SMP4 ADC_SMPR1_SMP4_Msk /*!< ADC channel 4 sampling time selection */ +#define ADC_SMPR1_SMP4_0 (0x1UL << ADC_SMPR1_SMP4_Pos) /*!< 0x00001000 */ +#define ADC_SMPR1_SMP4_1 (0x2UL << ADC_SMPR1_SMP4_Pos) /*!< 0x00002000 */ +#define ADC_SMPR1_SMP4_2 (0x4UL << ADC_SMPR1_SMP4_Pos) /*!< 0x00004000 */ + +#define ADC_SMPR1_SMP5_Pos (15U) +#define ADC_SMPR1_SMP5_Msk (0x7UL << ADC_SMPR1_SMP5_Pos) /*!< 0x00038000 */ +#define ADC_SMPR1_SMP5 ADC_SMPR1_SMP5_Msk /*!< ADC channel 5 sampling time selection */ +#define ADC_SMPR1_SMP5_0 (0x1UL << ADC_SMPR1_SMP5_Pos) /*!< 0x00008000 */ +#define ADC_SMPR1_SMP5_1 (0x2UL << ADC_SMPR1_SMP5_Pos) /*!< 0x00010000 */ +#define ADC_SMPR1_SMP5_2 (0x4UL << ADC_SMPR1_SMP5_Pos) /*!< 0x00020000 */ + +#define ADC_SMPR1_SMP6_Pos (18U) +#define ADC_SMPR1_SMP6_Msk (0x7UL << ADC_SMPR1_SMP6_Pos) /*!< 0x001C0000 */ +#define ADC_SMPR1_SMP6 ADC_SMPR1_SMP6_Msk /*!< ADC channel 6 sampling time selection */ +#define ADC_SMPR1_SMP6_0 (0x1UL << ADC_SMPR1_SMP6_Pos) /*!< 0x00040000 */ +#define ADC_SMPR1_SMP6_1 (0x2UL << ADC_SMPR1_SMP6_Pos) /*!< 0x00080000 */ +#define ADC_SMPR1_SMP6_2 (0x4UL << ADC_SMPR1_SMP6_Pos) /*!< 0x00100000 */ + +#define ADC_SMPR1_SMP7_Pos (21U) +#define ADC_SMPR1_SMP7_Msk (0x7UL << ADC_SMPR1_SMP7_Pos) /*!< 0x00E00000 */ +#define ADC_SMPR1_SMP7 ADC_SMPR1_SMP7_Msk /*!< ADC channel 7 sampling time selection */ +#define ADC_SMPR1_SMP7_0 (0x1UL << ADC_SMPR1_SMP7_Pos) /*!< 0x00200000 */ +#define ADC_SMPR1_SMP7_1 (0x2UL << ADC_SMPR1_SMP7_Pos) /*!< 0x00400000 */ +#define ADC_SMPR1_SMP7_2 (0x4UL << ADC_SMPR1_SMP7_Pos) /*!< 0x00800000 */ + +#define ADC_SMPR1_SMP8_Pos (24U) +#define ADC_SMPR1_SMP8_Msk (0x7UL << ADC_SMPR1_SMP8_Pos) /*!< 0x07000000 */ +#define ADC_SMPR1_SMP8 ADC_SMPR1_SMP8_Msk /*!< ADC channel 8 sampling time selection */ +#define ADC_SMPR1_SMP8_0 (0x1UL << ADC_SMPR1_SMP8_Pos) /*!< 0x01000000 */ +#define ADC_SMPR1_SMP8_1 (0x2UL << ADC_SMPR1_SMP8_Pos) /*!< 0x02000000 */ +#define ADC_SMPR1_SMP8_2 (0x4UL << ADC_SMPR1_SMP8_Pos) /*!< 0x04000000 */ + +#define ADC_SMPR1_SMP9_Pos (27U) +#define ADC_SMPR1_SMP9_Msk (0x7UL << ADC_SMPR1_SMP9_Pos) /*!< 0x38000000 */ +#define ADC_SMPR1_SMP9 ADC_SMPR1_SMP9_Msk /*!< ADC channel 9 sampling time selection */ +#define ADC_SMPR1_SMP9_0 (0x1UL << ADC_SMPR1_SMP9_Pos) /*!< 0x08000000 */ +#define ADC_SMPR1_SMP9_1 (0x2UL << ADC_SMPR1_SMP9_Pos) /*!< 0x10000000 */ +#define ADC_SMPR1_SMP9_2 (0x4UL << ADC_SMPR1_SMP9_Pos) /*!< 0x20000000 */ + +#define ADC_SMPR1_SMPPLUS_Pos (31U) +#define ADC_SMPR1_SMPPLUS_Msk (0x1UL << ADC_SMPR1_SMPPLUS_Pos) /*!< 0x80000000 */ +#define ADC_SMPR1_SMPPLUS ADC_SMPR1_SMPPLUS_Msk /*!< ADC channels sampling time additional setting */ + +/******************** Bit definition for ADC_SMPR2 register *****************/ +#define ADC_SMPR2_SMP10_Pos (0U) +#define ADC_SMPR2_SMP10_Msk (0x7UL << ADC_SMPR2_SMP10_Pos) /*!< 0x00000007 */ +#define ADC_SMPR2_SMP10 ADC_SMPR2_SMP10_Msk /*!< ADC channel 10 sampling time selection */ +#define ADC_SMPR2_SMP10_0 (0x1UL << ADC_SMPR2_SMP10_Pos) /*!< 0x00000001 */ +#define ADC_SMPR2_SMP10_1 (0x2UL << ADC_SMPR2_SMP10_Pos) /*!< 0x00000002 */ +#define ADC_SMPR2_SMP10_2 (0x4UL << ADC_SMPR2_SMP10_Pos) /*!< 0x00000004 */ + +#define ADC_SMPR2_SMP11_Pos (3U) +#define ADC_SMPR2_SMP11_Msk (0x7UL << ADC_SMPR2_SMP11_Pos) /*!< 0x00000038 */ +#define ADC_SMPR2_SMP11 ADC_SMPR2_SMP11_Msk /*!< ADC channel 11 sampling time selection */ +#define ADC_SMPR2_SMP11_0 (0x1UL << ADC_SMPR2_SMP11_Pos) /*!< 0x00000008 */ +#define ADC_SMPR2_SMP11_1 (0x2UL << ADC_SMPR2_SMP11_Pos) /*!< 0x00000010 */ +#define ADC_SMPR2_SMP11_2 (0x4UL << ADC_SMPR2_SMP11_Pos) /*!< 0x00000020 */ + +#define ADC_SMPR2_SMP12_Pos (6U) +#define ADC_SMPR2_SMP12_Msk (0x7UL << ADC_SMPR2_SMP12_Pos) /*!< 0x000001C0 */ +#define ADC_SMPR2_SMP12 ADC_SMPR2_SMP12_Msk /*!< ADC channel 12 sampling time selection */ +#define ADC_SMPR2_SMP12_0 (0x1UL << ADC_SMPR2_SMP12_Pos) /*!< 0x00000040 */ +#define ADC_SMPR2_SMP12_1 (0x2UL << ADC_SMPR2_SMP12_Pos) /*!< 0x00000080 */ +#define ADC_SMPR2_SMP12_2 (0x4UL << ADC_SMPR2_SMP12_Pos) /*!< 0x00000100 */ + +#define ADC_SMPR2_SMP13_Pos (9U) +#define ADC_SMPR2_SMP13_Msk (0x7UL << ADC_SMPR2_SMP13_Pos) /*!< 0x00000E00 */ +#define ADC_SMPR2_SMP13 ADC_SMPR2_SMP13_Msk /*!< ADC channel 13 sampling time selection */ +#define ADC_SMPR2_SMP13_0 (0x1UL << ADC_SMPR2_SMP13_Pos) /*!< 0x00000200 */ +#define ADC_SMPR2_SMP13_1 (0x2UL << ADC_SMPR2_SMP13_Pos) /*!< 0x00000400 */ +#define ADC_SMPR2_SMP13_2 (0x4UL << ADC_SMPR2_SMP13_Pos) /*!< 0x00000800 */ + +#define ADC_SMPR2_SMP14_Pos (12U) +#define ADC_SMPR2_SMP14_Msk (0x7UL << ADC_SMPR2_SMP14_Pos) /*!< 0x00007000 */ +#define ADC_SMPR2_SMP14 ADC_SMPR2_SMP14_Msk /*!< ADC channel 14 sampling time selection */ +#define ADC_SMPR2_SMP14_0 (0x1UL << ADC_SMPR2_SMP14_Pos) /*!< 0x00001000 */ +#define ADC_SMPR2_SMP14_1 (0x2UL << ADC_SMPR2_SMP14_Pos) /*!< 0x00002000 */ +#define ADC_SMPR2_SMP14_2 (0x4UL << ADC_SMPR2_SMP14_Pos) /*!< 0x00004000 */ + +#define ADC_SMPR2_SMP15_Pos (15U) +#define ADC_SMPR2_SMP15_Msk (0x7UL << ADC_SMPR2_SMP15_Pos) /*!< 0x00038000 */ +#define ADC_SMPR2_SMP15 ADC_SMPR2_SMP15_Msk /*!< ADC channel 15 sampling time selection */ +#define ADC_SMPR2_SMP15_0 (0x1UL << ADC_SMPR2_SMP15_Pos) /*!< 0x00008000 */ +#define ADC_SMPR2_SMP15_1 (0x2UL << ADC_SMPR2_SMP15_Pos) /*!< 0x00010000 */ +#define ADC_SMPR2_SMP15_2 (0x4UL << ADC_SMPR2_SMP15_Pos) /*!< 0x00020000 */ + +#define ADC_SMPR2_SMP16_Pos (18U) +#define ADC_SMPR2_SMP16_Msk (0x7UL << ADC_SMPR2_SMP16_Pos) /*!< 0x001C0000 */ +#define ADC_SMPR2_SMP16 ADC_SMPR2_SMP16_Msk /*!< ADC channel 16 sampling time selection */ +#define ADC_SMPR2_SMP16_0 (0x1UL << ADC_SMPR2_SMP16_Pos) /*!< 0x00040000 */ +#define ADC_SMPR2_SMP16_1 (0x2UL << ADC_SMPR2_SMP16_Pos) /*!< 0x00080000 */ +#define ADC_SMPR2_SMP16_2 (0x4UL << ADC_SMPR2_SMP16_Pos) /*!< 0x00100000 */ + +#define ADC_SMPR2_SMP17_Pos (21U) +#define ADC_SMPR2_SMP17_Msk (0x7UL << ADC_SMPR2_SMP17_Pos) /*!< 0x00E00000 */ +#define ADC_SMPR2_SMP17 ADC_SMPR2_SMP17_Msk /*!< ADC channel 17 sampling time selection */ +#define ADC_SMPR2_SMP17_0 (0x1UL << ADC_SMPR2_SMP17_Pos) /*!< 0x00200000 */ +#define ADC_SMPR2_SMP17_1 (0x2UL << ADC_SMPR2_SMP17_Pos) /*!< 0x00400000 */ +#define ADC_SMPR2_SMP17_2 (0x4UL << ADC_SMPR2_SMP17_Pos) /*!< 0x00800000 */ + +#define ADC_SMPR2_SMP18_Pos (24U) +#define ADC_SMPR2_SMP18_Msk (0x7UL << ADC_SMPR2_SMP18_Pos) /*!< 0x07000000 */ +#define ADC_SMPR2_SMP18 ADC_SMPR2_SMP18_Msk /*!< ADC channel 18 sampling time selection */ +#define ADC_SMPR2_SMP18_0 (0x1UL << ADC_SMPR2_SMP18_Pos) /*!< 0x01000000 */ +#define ADC_SMPR2_SMP18_1 (0x2UL << ADC_SMPR2_SMP18_Pos) /*!< 0x02000000 */ +#define ADC_SMPR2_SMP18_2 (0x4UL << ADC_SMPR2_SMP18_Pos) /*!< 0x04000000 */ + +/******************** Bit definition for ADC_TR1 register *******************/ +#define ADC_TR1_LT1_Pos (0U) +#define ADC_TR1_LT1_Msk (0xFFFUL << ADC_TR1_LT1_Pos) /*!< 0x00000FFF */ +#define ADC_TR1_LT1 ADC_TR1_LT1_Msk /*!< ADC analog watchdog 1 threshold low */ +#define ADC_TR1_LT1_0 (0x001UL << ADC_TR1_LT1_Pos) /*!< 0x00000001 */ +#define ADC_TR1_LT1_1 (0x002UL << ADC_TR1_LT1_Pos) /*!< 0x00000002 */ +#define ADC_TR1_LT1_2 (0x004UL << ADC_TR1_LT1_Pos) /*!< 0x00000004 */ +#define ADC_TR1_LT1_3 (0x008UL << ADC_TR1_LT1_Pos) /*!< 0x00000008 */ +#define ADC_TR1_LT1_4 (0x010UL << ADC_TR1_LT1_Pos) /*!< 0x00000010 */ +#define ADC_TR1_LT1_5 (0x020UL << ADC_TR1_LT1_Pos) /*!< 0x00000020 */ +#define ADC_TR1_LT1_6 (0x040UL << ADC_TR1_LT1_Pos) /*!< 0x00000040 */ +#define ADC_TR1_LT1_7 (0x080UL << ADC_TR1_LT1_Pos) /*!< 0x00000080 */ +#define ADC_TR1_LT1_8 (0x100UL << ADC_TR1_LT1_Pos) /*!< 0x00000100 */ +#define ADC_TR1_LT1_9 (0x200UL << ADC_TR1_LT1_Pos) /*!< 0x00000200 */ +#define ADC_TR1_LT1_10 (0x400UL << ADC_TR1_LT1_Pos) /*!< 0x00000400 */ +#define ADC_TR1_LT1_11 (0x800UL << ADC_TR1_LT1_Pos) /*!< 0x00000800 */ + +#define ADC_TR1_HT1_Pos (16U) +#define ADC_TR1_HT1_Msk (0xFFFUL << ADC_TR1_HT1_Pos) /*!< 0x0FFF0000 */ +#define ADC_TR1_HT1 ADC_TR1_HT1_Msk /*!< ADC Analog watchdog 1 threshold high */ +#define ADC_TR1_HT1_0 (0x001UL << ADC_TR1_HT1_Pos) /*!< 0x00010000 */ +#define ADC_TR1_HT1_1 (0x002UL << ADC_TR1_HT1_Pos) /*!< 0x00020000 */ +#define ADC_TR1_HT1_2 (0x004UL << ADC_TR1_HT1_Pos) /*!< 0x00040000 */ +#define ADC_TR1_HT1_3 (0x008UL << ADC_TR1_HT1_Pos) /*!< 0x00080000 */ +#define ADC_TR1_HT1_4 (0x010UL << ADC_TR1_HT1_Pos) /*!< 0x00100000 */ +#define ADC_TR1_HT1_5 (0x020UL << ADC_TR1_HT1_Pos) /*!< 0x00200000 */ +#define ADC_TR1_HT1_6 (0x040UL << ADC_TR1_HT1_Pos) /*!< 0x00400000 */ +#define ADC_TR1_HT1_7 (0x080UL << ADC_TR1_HT1_Pos) /*!< 0x00800000 */ +#define ADC_TR1_HT1_8 (0x100UL << ADC_TR1_HT1_Pos) /*!< 0x01000000 */ +#define ADC_TR1_HT1_9 (0x200UL << ADC_TR1_HT1_Pos) /*!< 0x02000000 */ +#define ADC_TR1_HT1_10 (0x400UL << ADC_TR1_HT1_Pos) /*!< 0x04000000 */ +#define ADC_TR1_HT1_11 (0x800UL << ADC_TR1_HT1_Pos) /*!< 0x08000000 */ + +/******************** Bit definition for ADC_TR2 register *******************/ +#define ADC_TR2_LT2_Pos (0U) +#define ADC_TR2_LT2_Msk (0xFFUL << ADC_TR2_LT2_Pos) /*!< 0x000000FF */ +#define ADC_TR2_LT2 ADC_TR2_LT2_Msk /*!< ADC analog watchdog 2 threshold low */ +#define ADC_TR2_LT2_0 (0x01UL << ADC_TR2_LT2_Pos) /*!< 0x00000001 */ +#define ADC_TR2_LT2_1 (0x02UL << ADC_TR2_LT2_Pos) /*!< 0x00000002 */ +#define ADC_TR2_LT2_2 (0x04UL << ADC_TR2_LT2_Pos) /*!< 0x00000004 */ +#define ADC_TR2_LT2_3 (0x08UL << ADC_TR2_LT2_Pos) /*!< 0x00000008 */ +#define ADC_TR2_LT2_4 (0x10UL << ADC_TR2_LT2_Pos) /*!< 0x00000010 */ +#define ADC_TR2_LT2_5 (0x20UL << ADC_TR2_LT2_Pos) /*!< 0x00000020 */ +#define ADC_TR2_LT2_6 (0x40UL << ADC_TR2_LT2_Pos) /*!< 0x00000040 */ +#define ADC_TR2_LT2_7 (0x80UL << ADC_TR2_LT2_Pos) /*!< 0x00000080 */ + +#define ADC_TR2_HT2_Pos (16U) +#define ADC_TR2_HT2_Msk (0xFFUL << ADC_TR2_HT2_Pos) /*!< 0x00FF0000 */ +#define ADC_TR2_HT2 ADC_TR2_HT2_Msk /*!< ADC analog watchdog 2 threshold high */ +#define ADC_TR2_HT2_0 (0x01UL << ADC_TR2_HT2_Pos) /*!< 0x00010000 */ +#define ADC_TR2_HT2_1 (0x02UL << ADC_TR2_HT2_Pos) /*!< 0x00020000 */ +#define ADC_TR2_HT2_2 (0x04UL << ADC_TR2_HT2_Pos) /*!< 0x00040000 */ +#define ADC_TR2_HT2_3 (0x08UL << ADC_TR2_HT2_Pos) /*!< 0x00080000 */ +#define ADC_TR2_HT2_4 (0x10UL << ADC_TR2_HT2_Pos) /*!< 0x00100000 */ +#define ADC_TR2_HT2_5 (0x20UL << ADC_TR2_HT2_Pos) /*!< 0x00200000 */ +#define ADC_TR2_HT2_6 (0x40UL << ADC_TR2_HT2_Pos) /*!< 0x00400000 */ +#define ADC_TR2_HT2_7 (0x80UL << ADC_TR2_HT2_Pos) /*!< 0x00800000 */ + +/******************** Bit definition for ADC_TR3 register *******************/ +#define ADC_TR3_LT3_Pos (0U) +#define ADC_TR3_LT3_Msk (0xFFUL << ADC_TR3_LT3_Pos) /*!< 0x000000FF */ +#define ADC_TR3_LT3 ADC_TR3_LT3_Msk /*!< ADC analog watchdog 3 threshold low */ +#define ADC_TR3_LT3_0 (0x01UL << ADC_TR3_LT3_Pos) /*!< 0x00000001 */ +#define ADC_TR3_LT3_1 (0x02UL << ADC_TR3_LT3_Pos) /*!< 0x00000002 */ +#define ADC_TR3_LT3_2 (0x04UL << ADC_TR3_LT3_Pos) /*!< 0x00000004 */ +#define ADC_TR3_LT3_3 (0x08UL << ADC_TR3_LT3_Pos) /*!< 0x00000008 */ +#define ADC_TR3_LT3_4 (0x10UL << ADC_TR3_LT3_Pos) /*!< 0x00000010 */ +#define ADC_TR3_LT3_5 (0x20UL << ADC_TR3_LT3_Pos) /*!< 0x00000020 */ +#define ADC_TR3_LT3_6 (0x40UL << ADC_TR3_LT3_Pos) /*!< 0x00000040 */ +#define ADC_TR3_LT3_7 (0x80UL << ADC_TR3_LT3_Pos) /*!< 0x00000080 */ + +#define ADC_TR3_HT3_Pos (16U) +#define ADC_TR3_HT3_Msk (0xFFUL << ADC_TR3_HT3_Pos) /*!< 0x00FF0000 */ +#define ADC_TR3_HT3 ADC_TR3_HT3_Msk /*!< ADC analog watchdog 3 threshold high */ +#define ADC_TR3_HT3_0 (0x01UL << ADC_TR3_HT3_Pos) /*!< 0x00010000 */ +#define ADC_TR3_HT3_1 (0x02UL << ADC_TR3_HT3_Pos) /*!< 0x00020000 */ +#define ADC_TR3_HT3_2 (0x04UL << ADC_TR3_HT3_Pos) /*!< 0x00040000 */ +#define ADC_TR3_HT3_3 (0x08UL << ADC_TR3_HT3_Pos) /*!< 0x00080000 */ +#define ADC_TR3_HT3_4 (0x10UL << ADC_TR3_HT3_Pos) /*!< 0x00100000 */ +#define ADC_TR3_HT3_5 (0x20UL << ADC_TR3_HT3_Pos) /*!< 0x00200000 */ +#define ADC_TR3_HT3_6 (0x40UL << ADC_TR3_HT3_Pos) /*!< 0x00400000 */ +#define ADC_TR3_HT3_7 (0x80UL << ADC_TR3_HT3_Pos) /*!< 0x00800000 */ + +/******************** Bit definition for ADC_SQR1 register ******************/ +#define ADC_SQR1_L_Pos (0U) +#define ADC_SQR1_L_Msk (0xFUL << ADC_SQR1_L_Pos) /*!< 0x0000000F */ +#define ADC_SQR1_L ADC_SQR1_L_Msk /*!< ADC group regular sequencer scan length */ +#define ADC_SQR1_L_0 (0x1UL << ADC_SQR1_L_Pos) /*!< 0x00000001 */ +#define ADC_SQR1_L_1 (0x2UL << ADC_SQR1_L_Pos) /*!< 0x00000002 */ +#define ADC_SQR1_L_2 (0x4UL << ADC_SQR1_L_Pos) /*!< 0x00000004 */ +#define ADC_SQR1_L_3 (0x8UL << ADC_SQR1_L_Pos) /*!< 0x00000008 */ + +#define ADC_SQR1_SQ1_Pos (6U) +#define ADC_SQR1_SQ1_Msk (0x1FUL << ADC_SQR1_SQ1_Pos) /*!< 0x000007C0 */ +#define ADC_SQR1_SQ1 ADC_SQR1_SQ1_Msk /*!< ADC group regular sequencer rank 1 */ +#define ADC_SQR1_SQ1_0 (0x01UL << ADC_SQR1_SQ1_Pos) /*!< 0x00000040 */ +#define ADC_SQR1_SQ1_1 (0x02UL << ADC_SQR1_SQ1_Pos) /*!< 0x00000080 */ +#define ADC_SQR1_SQ1_2 (0x04UL << ADC_SQR1_SQ1_Pos) /*!< 0x00000100 */ +#define ADC_SQR1_SQ1_3 (0x08UL << ADC_SQR1_SQ1_Pos) /*!< 0x00000200 */ +#define ADC_SQR1_SQ1_4 (0x10UL << ADC_SQR1_SQ1_Pos) /*!< 0x00000400 */ + +#define ADC_SQR1_SQ2_Pos (12U) +#define ADC_SQR1_SQ2_Msk (0x1FUL << ADC_SQR1_SQ2_Pos) /*!< 0x0001F000 */ +#define ADC_SQR1_SQ2 ADC_SQR1_SQ2_Msk /*!< ADC group regular sequencer rank 2 */ +#define ADC_SQR1_SQ2_0 (0x01UL << ADC_SQR1_SQ2_Pos) /*!< 0x00001000 */ +#define ADC_SQR1_SQ2_1 (0x02UL << ADC_SQR1_SQ2_Pos) /*!< 0x00002000 */ +#define ADC_SQR1_SQ2_2 (0x04UL << ADC_SQR1_SQ2_Pos) /*!< 0x00004000 */ +#define ADC_SQR1_SQ2_3 (0x08UL << ADC_SQR1_SQ2_Pos) /*!< 0x00008000 */ +#define ADC_SQR1_SQ2_4 (0x10UL << ADC_SQR1_SQ2_Pos) /*!< 0x00010000 */ + +#define ADC_SQR1_SQ3_Pos (18U) +#define ADC_SQR1_SQ3_Msk (0x1FUL << ADC_SQR1_SQ3_Pos) /*!< 0x007C0000 */ +#define ADC_SQR1_SQ3 ADC_SQR1_SQ3_Msk /*!< ADC group regular sequencer rank 3 */ +#define ADC_SQR1_SQ3_0 (0x01UL << ADC_SQR1_SQ3_Pos) /*!< 0x00040000 */ +#define ADC_SQR1_SQ3_1 (0x02UL << ADC_SQR1_SQ3_Pos) /*!< 0x00080000 */ +#define ADC_SQR1_SQ3_2 (0x04UL << ADC_SQR1_SQ3_Pos) /*!< 0x00100000 */ +#define ADC_SQR1_SQ3_3 (0x08UL << ADC_SQR1_SQ3_Pos) /*!< 0x00200000 */ +#define ADC_SQR1_SQ3_4 (0x10UL << ADC_SQR1_SQ3_Pos) /*!< 0x00400000 */ + +#define ADC_SQR1_SQ4_Pos (24U) +#define ADC_SQR1_SQ4_Msk (0x1FUL << ADC_SQR1_SQ4_Pos) /*!< 0x1F000000 */ +#define ADC_SQR1_SQ4 ADC_SQR1_SQ4_Msk /*!< ADC group regular sequencer rank 4 */ +#define ADC_SQR1_SQ4_0 (0x01UL << ADC_SQR1_SQ4_Pos) /*!< 0x01000000 */ +#define ADC_SQR1_SQ4_1 (0x02UL << ADC_SQR1_SQ4_Pos) /*!< 0x02000000 */ +#define ADC_SQR1_SQ4_2 (0x04UL << ADC_SQR1_SQ4_Pos) /*!< 0x04000000 */ +#define ADC_SQR1_SQ4_3 (0x08UL << ADC_SQR1_SQ4_Pos) /*!< 0x08000000 */ +#define ADC_SQR1_SQ4_4 (0x10UL << ADC_SQR1_SQ4_Pos) /*!< 0x10000000 */ + +/******************** Bit definition for ADC_SQR2 register ******************/ +#define ADC_SQR2_SQ5_Pos (0U) +#define ADC_SQR2_SQ5_Msk (0x1FUL << ADC_SQR2_SQ5_Pos) /*!< 0x0000001F */ +#define ADC_SQR2_SQ5 ADC_SQR2_SQ5_Msk /*!< ADC group regular sequencer rank 5 */ +#define ADC_SQR2_SQ5_0 (0x01UL << ADC_SQR2_SQ5_Pos) /*!< 0x00000001 */ +#define ADC_SQR2_SQ5_1 (0x02UL << ADC_SQR2_SQ5_Pos) /*!< 0x00000002 */ +#define ADC_SQR2_SQ5_2 (0x04UL << ADC_SQR2_SQ5_Pos) /*!< 0x00000004 */ +#define ADC_SQR2_SQ5_3 (0x08UL << ADC_SQR2_SQ5_Pos) /*!< 0x00000008 */ +#define ADC_SQR2_SQ5_4 (0x10UL << ADC_SQR2_SQ5_Pos) /*!< 0x00000010 */ + +#define ADC_SQR2_SQ6_Pos (6U) +#define ADC_SQR2_SQ6_Msk (0x1FUL << ADC_SQR2_SQ6_Pos) /*!< 0x000007C0 */ +#define ADC_SQR2_SQ6 ADC_SQR2_SQ6_Msk /*!< ADC group regular sequencer rank 6 */ +#define ADC_SQR2_SQ6_0 (0x01UL << ADC_SQR2_SQ6_Pos) /*!< 0x00000040 */ +#define ADC_SQR2_SQ6_1 (0x02UL << ADC_SQR2_SQ6_Pos) /*!< 0x00000080 */ +#define ADC_SQR2_SQ6_2 (0x04UL << ADC_SQR2_SQ6_Pos) /*!< 0x00000100 */ +#define ADC_SQR2_SQ6_3 (0x08UL << ADC_SQR2_SQ6_Pos) /*!< 0x00000200 */ +#define ADC_SQR2_SQ6_4 (0x10UL << ADC_SQR2_SQ6_Pos) /*!< 0x00000400 */ + +#define ADC_SQR2_SQ7_Pos (12U) +#define ADC_SQR2_SQ7_Msk (0x1FUL << ADC_SQR2_SQ7_Pos) /*!< 0x0001F000 */ +#define ADC_SQR2_SQ7 ADC_SQR2_SQ7_Msk /*!< ADC group regular sequencer rank 7 */ +#define ADC_SQR2_SQ7_0 (0x01UL << ADC_SQR2_SQ7_Pos) /*!< 0x00001000 */ +#define ADC_SQR2_SQ7_1 (0x02UL << ADC_SQR2_SQ7_Pos) /*!< 0x00002000 */ +#define ADC_SQR2_SQ7_2 (0x04UL << ADC_SQR2_SQ7_Pos) /*!< 0x00004000 */ +#define ADC_SQR2_SQ7_3 (0x08UL << ADC_SQR2_SQ7_Pos) /*!< 0x00008000 */ +#define ADC_SQR2_SQ7_4 (0x10UL << ADC_SQR2_SQ7_Pos) /*!< 0x00010000 */ + +#define ADC_SQR2_SQ8_Pos (18U) +#define ADC_SQR2_SQ8_Msk (0x1FUL << ADC_SQR2_SQ8_Pos) /*!< 0x007C0000 */ +#define ADC_SQR2_SQ8 ADC_SQR2_SQ8_Msk /*!< ADC group regular sequencer rank 8 */ +#define ADC_SQR2_SQ8_0 (0x01UL << ADC_SQR2_SQ8_Pos) /*!< 0x00040000 */ +#define ADC_SQR2_SQ8_1 (0x02UL << ADC_SQR2_SQ8_Pos) /*!< 0x00080000 */ +#define ADC_SQR2_SQ8_2 (0x04UL << ADC_SQR2_SQ8_Pos) /*!< 0x00100000 */ +#define ADC_SQR2_SQ8_3 (0x08UL << ADC_SQR2_SQ8_Pos) /*!< 0x00200000 */ +#define ADC_SQR2_SQ8_4 (0x10UL << ADC_SQR2_SQ8_Pos) /*!< 0x00400000 */ + +#define ADC_SQR2_SQ9_Pos (24U) +#define ADC_SQR2_SQ9_Msk (0x1FUL << ADC_SQR2_SQ9_Pos) /*!< 0x1F000000 */ +#define ADC_SQR2_SQ9 ADC_SQR2_SQ9_Msk /*!< ADC group regular sequencer rank 9 */ +#define ADC_SQR2_SQ9_0 (0x01UL << ADC_SQR2_SQ9_Pos) /*!< 0x01000000 */ +#define ADC_SQR2_SQ9_1 (0x02UL << ADC_SQR2_SQ9_Pos) /*!< 0x02000000 */ +#define ADC_SQR2_SQ9_2 (0x04UL << ADC_SQR2_SQ9_Pos) /*!< 0x04000000 */ +#define ADC_SQR2_SQ9_3 (0x08UL << ADC_SQR2_SQ9_Pos) /*!< 0x08000000 */ +#define ADC_SQR2_SQ9_4 (0x10UL << ADC_SQR2_SQ9_Pos) /*!< 0x10000000 */ + +/******************** Bit definition for ADC_SQR3 register ******************/ +#define ADC_SQR3_SQ10_Pos (0U) +#define ADC_SQR3_SQ10_Msk (0x1FUL << ADC_SQR3_SQ10_Pos) /*!< 0x0000001F */ +#define ADC_SQR3_SQ10 ADC_SQR3_SQ10_Msk /*!< ADC group regular sequencer rank 10 */ +#define ADC_SQR3_SQ10_0 (0x01UL << ADC_SQR3_SQ10_Pos) /*!< 0x00000001 */ +#define ADC_SQR3_SQ10_1 (0x02UL << ADC_SQR3_SQ10_Pos) /*!< 0x00000002 */ +#define ADC_SQR3_SQ10_2 (0x04UL << ADC_SQR3_SQ10_Pos) /*!< 0x00000004 */ +#define ADC_SQR3_SQ10_3 (0x08UL << ADC_SQR3_SQ10_Pos) /*!< 0x00000008 */ +#define ADC_SQR3_SQ10_4 (0x10UL << ADC_SQR3_SQ10_Pos) /*!< 0x00000010 */ + +#define ADC_SQR3_SQ11_Pos (6U) +#define ADC_SQR3_SQ11_Msk (0x1FUL << ADC_SQR3_SQ11_Pos) /*!< 0x000007C0 */ +#define ADC_SQR3_SQ11 ADC_SQR3_SQ11_Msk /*!< ADC group regular sequencer rank 11 */ +#define ADC_SQR3_SQ11_0 (0x01UL << ADC_SQR3_SQ11_Pos) /*!< 0x00000040 */ +#define ADC_SQR3_SQ11_1 (0x02UL << ADC_SQR3_SQ11_Pos) /*!< 0x00000080 */ +#define ADC_SQR3_SQ11_2 (0x04UL << ADC_SQR3_SQ11_Pos) /*!< 0x00000100 */ +#define ADC_SQR3_SQ11_3 (0x08UL << ADC_SQR3_SQ11_Pos) /*!< 0x00000200 */ +#define ADC_SQR3_SQ11_4 (0x10UL << ADC_SQR3_SQ11_Pos) /*!< 0x00000400 */ + +#define ADC_SQR3_SQ12_Pos (12U) +#define ADC_SQR3_SQ12_Msk (0x1FUL << ADC_SQR3_SQ12_Pos) /*!< 0x0001F000 */ +#define ADC_SQR3_SQ12 ADC_SQR3_SQ12_Msk /*!< ADC group regular sequencer rank 12 */ +#define ADC_SQR3_SQ12_0 (0x01UL << ADC_SQR3_SQ12_Pos) /*!< 0x00001000 */ +#define ADC_SQR3_SQ12_1 (0x02UL << ADC_SQR3_SQ12_Pos) /*!< 0x00002000 */ +#define ADC_SQR3_SQ12_2 (0x04UL << ADC_SQR3_SQ12_Pos) /*!< 0x00004000 */ +#define ADC_SQR3_SQ12_3 (0x08UL << ADC_SQR3_SQ12_Pos) /*!< 0x00008000 */ +#define ADC_SQR3_SQ12_4 (0x10UL << ADC_SQR3_SQ12_Pos) /*!< 0x00010000 */ + +#define ADC_SQR3_SQ13_Pos (18U) +#define ADC_SQR3_SQ13_Msk (0x1FUL << ADC_SQR3_SQ13_Pos) /*!< 0x007C0000 */ +#define ADC_SQR3_SQ13 ADC_SQR3_SQ13_Msk /*!< ADC group regular sequencer rank 13 */ +#define ADC_SQR3_SQ13_0 (0x01UL << ADC_SQR3_SQ13_Pos) /*!< 0x00040000 */ +#define ADC_SQR3_SQ13_1 (0x02UL << ADC_SQR3_SQ13_Pos) /*!< 0x00080000 */ +#define ADC_SQR3_SQ13_2 (0x04UL << ADC_SQR3_SQ13_Pos) /*!< 0x00100000 */ +#define ADC_SQR3_SQ13_3 (0x08UL << ADC_SQR3_SQ13_Pos) /*!< 0x00200000 */ +#define ADC_SQR3_SQ13_4 (0x10UL << ADC_SQR3_SQ13_Pos) /*!< 0x00400000 */ + +#define ADC_SQR3_SQ14_Pos (24U) +#define ADC_SQR3_SQ14_Msk (0x1FUL << ADC_SQR3_SQ14_Pos) /*!< 0x1F000000 */ +#define ADC_SQR3_SQ14 ADC_SQR3_SQ14_Msk /*!< ADC group regular sequencer rank 14 */ +#define ADC_SQR3_SQ14_0 (0x01UL << ADC_SQR3_SQ14_Pos) /*!< 0x01000000 */ +#define ADC_SQR3_SQ14_1 (0x02UL << ADC_SQR3_SQ14_Pos) /*!< 0x02000000 */ +#define ADC_SQR3_SQ14_2 (0x04UL << ADC_SQR3_SQ14_Pos) /*!< 0x04000000 */ +#define ADC_SQR3_SQ14_3 (0x08UL << ADC_SQR3_SQ14_Pos) /*!< 0x08000000 */ +#define ADC_SQR3_SQ14_4 (0x10UL << ADC_SQR3_SQ14_Pos) /*!< 0x10000000 */ + +/******************** Bit definition for ADC_SQR4 register ******************/ +#define ADC_SQR4_SQ15_Pos (0U) +#define ADC_SQR4_SQ15_Msk (0x1FUL << ADC_SQR4_SQ15_Pos) /*!< 0x0000001F */ +#define ADC_SQR4_SQ15 ADC_SQR4_SQ15_Msk /*!< ADC group regular sequencer rank 15 */ +#define ADC_SQR4_SQ15_0 (0x01UL << ADC_SQR4_SQ15_Pos) /*!< 0x00000001 */ +#define ADC_SQR4_SQ15_1 (0x02UL << ADC_SQR4_SQ15_Pos) /*!< 0x00000002 */ +#define ADC_SQR4_SQ15_2 (0x04UL << ADC_SQR4_SQ15_Pos) /*!< 0x00000004 */ +#define ADC_SQR4_SQ15_3 (0x08UL << ADC_SQR4_SQ15_Pos) /*!< 0x00000008 */ +#define ADC_SQR4_SQ15_4 (0x10UL << ADC_SQR4_SQ15_Pos) /*!< 0x00000010 */ + +#define ADC_SQR4_SQ16_Pos (6U) +#define ADC_SQR4_SQ16_Msk (0x1FUL << ADC_SQR4_SQ16_Pos) /*!< 0x000007C0 */ +#define ADC_SQR4_SQ16 ADC_SQR4_SQ16_Msk /*!< ADC group regular sequencer rank 16 */ +#define ADC_SQR4_SQ16_0 (0x01UL << ADC_SQR4_SQ16_Pos) /*!< 0x00000040 */ +#define ADC_SQR4_SQ16_1 (0x02UL << ADC_SQR4_SQ16_Pos) /*!< 0x00000080 */ +#define ADC_SQR4_SQ16_2 (0x04UL << ADC_SQR4_SQ16_Pos) /*!< 0x00000100 */ +#define ADC_SQR4_SQ16_3 (0x08UL << ADC_SQR4_SQ16_Pos) /*!< 0x00000200 */ +#define ADC_SQR4_SQ16_4 (0x10UL << ADC_SQR4_SQ16_Pos) /*!< 0x00000400 */ + +/******************** Bit definition for ADC_DR register ********************/ +#define ADC_DR_RDATA_Pos (0U) +#define ADC_DR_RDATA_Msk (0xFFFFUL << ADC_DR_RDATA_Pos) /*!< 0x0000FFFF */ +#define ADC_DR_RDATA ADC_DR_RDATA_Msk /*!< ADC group regular conversion data */ +#define ADC_DR_RDATA_0 (0x0001UL << ADC_DR_RDATA_Pos) /*!< 0x00000001 */ +#define ADC_DR_RDATA_1 (0x0002UL << ADC_DR_RDATA_Pos) /*!< 0x00000002 */ +#define ADC_DR_RDATA_2 (0x0004UL << ADC_DR_RDATA_Pos) /*!< 0x00000004 */ +#define ADC_DR_RDATA_3 (0x0008UL << ADC_DR_RDATA_Pos) /*!< 0x00000008 */ +#define ADC_DR_RDATA_4 (0x0010UL << ADC_DR_RDATA_Pos) /*!< 0x00000010 */ +#define ADC_DR_RDATA_5 (0x0020UL << ADC_DR_RDATA_Pos) /*!< 0x00000020 */ +#define ADC_DR_RDATA_6 (0x0040UL << ADC_DR_RDATA_Pos) /*!< 0x00000040 */ +#define ADC_DR_RDATA_7 (0x0080UL << ADC_DR_RDATA_Pos) /*!< 0x00000080 */ +#define ADC_DR_RDATA_8 (0x0100UL << ADC_DR_RDATA_Pos) /*!< 0x00000100 */ +#define ADC_DR_RDATA_9 (0x0200UL << ADC_DR_RDATA_Pos) /*!< 0x00000200 */ +#define ADC_DR_RDATA_10 (0x0400UL << ADC_DR_RDATA_Pos) /*!< 0x00000400 */ +#define ADC_DR_RDATA_11 (0x0800UL << ADC_DR_RDATA_Pos) /*!< 0x00000800 */ +#define ADC_DR_RDATA_12 (0x1000UL << ADC_DR_RDATA_Pos) /*!< 0x00001000 */ +#define ADC_DR_RDATA_13 (0x2000UL << ADC_DR_RDATA_Pos) /*!< 0x00002000 */ +#define ADC_DR_RDATA_14 (0x4000UL << ADC_DR_RDATA_Pos) /*!< 0x00004000 */ +#define ADC_DR_RDATA_15 (0x8000UL << ADC_DR_RDATA_Pos) /*!< 0x00008000 */ + +/******************** Bit definition for ADC_JSQR register ******************/ +#define ADC_JSQR_JL_Pos (0U) +#define ADC_JSQR_JL_Msk (0x3UL << ADC_JSQR_JL_Pos) /*!< 0x00000003 */ +#define ADC_JSQR_JL ADC_JSQR_JL_Msk /*!< ADC group injected sequencer scan length */ +#define ADC_JSQR_JL_0 (0x1UL << ADC_JSQR_JL_Pos) /*!< 0x00000001 */ +#define ADC_JSQR_JL_1 (0x2UL << ADC_JSQR_JL_Pos) /*!< 0x00000002 */ + +#define ADC_JSQR_JEXTSEL_Pos (2U) +#define ADC_JSQR_JEXTSEL_Msk (0xFUL << ADC_JSQR_JEXTSEL_Pos) /*!< 0x0000003C */ +#define ADC_JSQR_JEXTSEL ADC_JSQR_JEXTSEL_Msk /*!< ADC group injected external trigger source */ +#define ADC_JSQR_JEXTSEL_0 (0x1UL << ADC_JSQR_JEXTSEL_Pos) /*!< 0x00000004 */ +#define ADC_JSQR_JEXTSEL_1 (0x2UL << ADC_JSQR_JEXTSEL_Pos) /*!< 0x00000008 */ +#define ADC_JSQR_JEXTSEL_2 (0x4UL << ADC_JSQR_JEXTSEL_Pos) /*!< 0x00000010 */ +#define ADC_JSQR_JEXTSEL_3 (0x8UL << ADC_JSQR_JEXTSEL_Pos) /*!< 0x00000020 */ + +#define ADC_JSQR_JEXTEN_Pos (6U) +#define ADC_JSQR_JEXTEN_Msk (0x3UL << ADC_JSQR_JEXTEN_Pos) /*!< 0x000000C0 */ +#define ADC_JSQR_JEXTEN ADC_JSQR_JEXTEN_Msk /*!< ADC group injected external trigger polarity */ +#define ADC_JSQR_JEXTEN_0 (0x1UL << ADC_JSQR_JEXTEN_Pos) /*!< 0x00000040 */ +#define ADC_JSQR_JEXTEN_1 (0x2UL << ADC_JSQR_JEXTEN_Pos) /*!< 0x00000080 */ + +#define ADC_JSQR_JSQ1_Pos (8U) +#define ADC_JSQR_JSQ1_Msk (0x1FUL << ADC_JSQR_JSQ1_Pos) /*!< 0x00001F00 */ +#define ADC_JSQR_JSQ1 ADC_JSQR_JSQ1_Msk /*!< ADC group injected sequencer rank 1 */ +#define ADC_JSQR_JSQ1_0 (0x01UL << ADC_JSQR_JSQ1_Pos) /*!< 0x00000100 */ +#define ADC_JSQR_JSQ1_1 (0x02UL << ADC_JSQR_JSQ1_Pos) /*!< 0x00000200 */ +#define ADC_JSQR_JSQ1_2 (0x04UL << ADC_JSQR_JSQ1_Pos) /*!< 0x00000400 */ +#define ADC_JSQR_JSQ1_3 (0x08UL << ADC_JSQR_JSQ1_Pos) /*!< 0x00000800 */ +#define ADC_JSQR_JSQ1_4 (0x10UL << ADC_JSQR_JSQ1_Pos) /*!< 0x00001000 */ + +#define ADC_JSQR_JSQ2_Pos (14U) +#define ADC_JSQR_JSQ2_Msk (0x1FUL << ADC_JSQR_JSQ2_Pos) /*!< 0x0007C000 */ +#define ADC_JSQR_JSQ2 ADC_JSQR_JSQ2_Msk /*!< ADC group injected sequencer rank 2 */ +#define ADC_JSQR_JSQ2_0 (0x01UL << ADC_JSQR_JSQ2_Pos) /*!< 0x00004000 */ +#define ADC_JSQR_JSQ2_1 (0x02UL << ADC_JSQR_JSQ2_Pos) /*!< 0x00008000 */ +#define ADC_JSQR_JSQ2_2 (0x04UL << ADC_JSQR_JSQ2_Pos) /*!< 0x00010000 */ +#define ADC_JSQR_JSQ2_3 (0x08UL << ADC_JSQR_JSQ2_Pos) /*!< 0x00020000 */ +#define ADC_JSQR_JSQ2_4 (0x10UL << ADC_JSQR_JSQ2_Pos) /*!< 0x00040000 */ + +#define ADC_JSQR_JSQ3_Pos (20U) +#define ADC_JSQR_JSQ3_Msk (0x1FUL << ADC_JSQR_JSQ3_Pos) /*!< 0x01F00000 */ +#define ADC_JSQR_JSQ3 ADC_JSQR_JSQ3_Msk /*!< ADC group injected sequencer rank 3 */ +#define ADC_JSQR_JSQ3_0 (0x01UL << ADC_JSQR_JSQ3_Pos) /*!< 0x00100000 */ +#define ADC_JSQR_JSQ3_1 (0x02UL << ADC_JSQR_JSQ3_Pos) /*!< 0x00200000 */ +#define ADC_JSQR_JSQ3_2 (0x04UL << ADC_JSQR_JSQ3_Pos) /*!< 0x00400000 */ +#define ADC_JSQR_JSQ3_3 (0x08UL << ADC_JSQR_JSQ3_Pos) /*!< 0x00800000 */ +#define ADC_JSQR_JSQ3_4 (0x10UL << ADC_JSQR_JSQ3_Pos) /*!< 0x01000000 */ + +#define ADC_JSQR_JSQ4_Pos (26U) +#define ADC_JSQR_JSQ4_Msk (0x1FUL << ADC_JSQR_JSQ4_Pos) /*!< 0x7C000000 */ +#define ADC_JSQR_JSQ4 ADC_JSQR_JSQ4_Msk /*!< ADC group injected sequencer rank 4 */ +#define ADC_JSQR_JSQ4_0 (0x01UL << ADC_JSQR_JSQ4_Pos) /*!< 0x04000000 */ +#define ADC_JSQR_JSQ4_1 (0x02UL << ADC_JSQR_JSQ4_Pos) /*!< 0x08000000 */ +#define ADC_JSQR_JSQ4_2 (0x04UL << ADC_JSQR_JSQ4_Pos) /*!< 0x10000000 */ +#define ADC_JSQR_JSQ4_3 (0x08UL << ADC_JSQR_JSQ4_Pos) /*!< 0x20000000 */ +#define ADC_JSQR_JSQ4_4 (0x10UL << ADC_JSQR_JSQ4_Pos) /*!< 0x40000000 */ + +/******************** Bit definition for ADC_OFR1 register ******************/ +#define ADC_OFR1_OFFSET1_Pos (0U) +#define ADC_OFR1_OFFSET1_Msk (0xFFFUL << ADC_OFR1_OFFSET1_Pos) /*!< 0x00000FFF */ +#define ADC_OFR1_OFFSET1 ADC_OFR1_OFFSET1_Msk /*!< ADC offset number 1 offset level */ +#define ADC_OFR1_OFFSET1_0 (0x001UL << ADC_OFR1_OFFSET1_Pos) /*!< 0x00000001 */ +#define ADC_OFR1_OFFSET1_1 (0x002UL << ADC_OFR1_OFFSET1_Pos) /*!< 0x00000002 */ +#define ADC_OFR1_OFFSET1_2 (0x004UL << ADC_OFR1_OFFSET1_Pos) /*!< 0x00000004 */ +#define ADC_OFR1_OFFSET1_3 (0x008UL << ADC_OFR1_OFFSET1_Pos) /*!< 0x00000008 */ +#define ADC_OFR1_OFFSET1_4 (0x010UL << ADC_OFR1_OFFSET1_Pos) /*!< 0x00000010 */ +#define ADC_OFR1_OFFSET1_5 (0x020UL << ADC_OFR1_OFFSET1_Pos) /*!< 0x00000020 */ +#define ADC_OFR1_OFFSET1_6 (0x040UL << ADC_OFR1_OFFSET1_Pos) /*!< 0x00000040 */ +#define ADC_OFR1_OFFSET1_7 (0x080UL << ADC_OFR1_OFFSET1_Pos) /*!< 0x00000080 */ +#define ADC_OFR1_OFFSET1_8 (0x100UL << ADC_OFR1_OFFSET1_Pos) /*!< 0x00000100 */ +#define ADC_OFR1_OFFSET1_9 (0x200UL << ADC_OFR1_OFFSET1_Pos) /*!< 0x00000200 */ +#define ADC_OFR1_OFFSET1_10 (0x400UL << ADC_OFR1_OFFSET1_Pos) /*!< 0x00000400 */ +#define ADC_OFR1_OFFSET1_11 (0x800UL << ADC_OFR1_OFFSET1_Pos) /*!< 0x00000800 */ + +#define ADC_OFR1_OFFSET1_CH_Pos (26U) +#define ADC_OFR1_OFFSET1_CH_Msk (0x1FUL << ADC_OFR1_OFFSET1_CH_Pos) /*!< 0x7C000000 */ +#define ADC_OFR1_OFFSET1_CH ADC_OFR1_OFFSET1_CH_Msk /*!< ADC offset number 1 channel selection */ +#define ADC_OFR1_OFFSET1_CH_0 (0x01UL << ADC_OFR1_OFFSET1_CH_Pos) /*!< 0x04000000 */ +#define ADC_OFR1_OFFSET1_CH_1 (0x02UL << ADC_OFR1_OFFSET1_CH_Pos) /*!< 0x08000000 */ +#define ADC_OFR1_OFFSET1_CH_2 (0x04UL << ADC_OFR1_OFFSET1_CH_Pos) /*!< 0x10000000 */ +#define ADC_OFR1_OFFSET1_CH_3 (0x08UL << ADC_OFR1_OFFSET1_CH_Pos) /*!< 0x20000000 */ +#define ADC_OFR1_OFFSET1_CH_4 (0x10UL << ADC_OFR1_OFFSET1_CH_Pos) /*!< 0x40000000 */ + +#define ADC_OFR1_OFFSET1_EN_Pos (31U) +#define ADC_OFR1_OFFSET1_EN_Msk (0x1UL << ADC_OFR1_OFFSET1_EN_Pos) /*!< 0x80000000 */ +#define ADC_OFR1_OFFSET1_EN ADC_OFR1_OFFSET1_EN_Msk /*!< ADC offset number 1 enable */ + +/******************** Bit definition for ADC_OFR2 register ******************/ +#define ADC_OFR2_OFFSET2_Pos (0U) +#define ADC_OFR2_OFFSET2_Msk (0xFFFUL << ADC_OFR2_OFFSET2_Pos) /*!< 0x00000FFF */ +#define ADC_OFR2_OFFSET2 ADC_OFR2_OFFSET2_Msk /*!< ADC offset number 2 offset level */ +#define ADC_OFR2_OFFSET2_0 (0x001UL << ADC_OFR2_OFFSET2_Pos) /*!< 0x00000001 */ +#define ADC_OFR2_OFFSET2_1 (0x002UL << ADC_OFR2_OFFSET2_Pos) /*!< 0x00000002 */ +#define ADC_OFR2_OFFSET2_2 (0x004UL << ADC_OFR2_OFFSET2_Pos) /*!< 0x00000004 */ +#define ADC_OFR2_OFFSET2_3 (0x008UL << ADC_OFR2_OFFSET2_Pos) /*!< 0x00000008 */ +#define ADC_OFR2_OFFSET2_4 (0x010UL << ADC_OFR2_OFFSET2_Pos) /*!< 0x00000010 */ +#define ADC_OFR2_OFFSET2_5 (0x020UL << ADC_OFR2_OFFSET2_Pos) /*!< 0x00000020 */ +#define ADC_OFR2_OFFSET2_6 (0x040UL << ADC_OFR2_OFFSET2_Pos) /*!< 0x00000040 */ +#define ADC_OFR2_OFFSET2_7 (0x080UL << ADC_OFR2_OFFSET2_Pos) /*!< 0x00000080 */ +#define ADC_OFR2_OFFSET2_8 (0x100UL << ADC_OFR2_OFFSET2_Pos) /*!< 0x00000100 */ +#define ADC_OFR2_OFFSET2_9 (0x200UL << ADC_OFR2_OFFSET2_Pos) /*!< 0x00000200 */ +#define ADC_OFR2_OFFSET2_10 (0x400UL << ADC_OFR2_OFFSET2_Pos) /*!< 0x00000400 */ +#define ADC_OFR2_OFFSET2_11 (0x800UL << ADC_OFR2_OFFSET2_Pos) /*!< 0x00000800 */ + +#define ADC_OFR2_OFFSET2_CH_Pos (26U) +#define ADC_OFR2_OFFSET2_CH_Msk (0x1FUL << ADC_OFR2_OFFSET2_CH_Pos) /*!< 0x7C000000 */ +#define ADC_OFR2_OFFSET2_CH ADC_OFR2_OFFSET2_CH_Msk /*!< ADC offset number 2 channel selection */ +#define ADC_OFR2_OFFSET2_CH_0 (0x01UL << ADC_OFR2_OFFSET2_CH_Pos) /*!< 0x04000000 */ +#define ADC_OFR2_OFFSET2_CH_1 (0x02UL << ADC_OFR2_OFFSET2_CH_Pos) /*!< 0x08000000 */ +#define ADC_OFR2_OFFSET2_CH_2 (0x04UL << ADC_OFR2_OFFSET2_CH_Pos) /*!< 0x10000000 */ +#define ADC_OFR2_OFFSET2_CH_3 (0x08UL << ADC_OFR2_OFFSET2_CH_Pos) /*!< 0x20000000 */ +#define ADC_OFR2_OFFSET2_CH_4 (0x10UL << ADC_OFR2_OFFSET2_CH_Pos) /*!< 0x40000000 */ + +#define ADC_OFR2_OFFSET2_EN_Pos (31U) +#define ADC_OFR2_OFFSET2_EN_Msk (0x1UL << ADC_OFR2_OFFSET2_EN_Pos) /*!< 0x80000000 */ +#define ADC_OFR2_OFFSET2_EN ADC_OFR2_OFFSET2_EN_Msk /*!< ADC offset number 2 enable */ + +/******************** Bit definition for ADC_OFR3 register ******************/ +#define ADC_OFR3_OFFSET3_Pos (0U) +#define ADC_OFR3_OFFSET3_Msk (0xFFFUL << ADC_OFR3_OFFSET3_Pos) /*!< 0x00000FFF */ +#define ADC_OFR3_OFFSET3 ADC_OFR3_OFFSET3_Msk /*!< ADC offset number 3 offset level */ +#define ADC_OFR3_OFFSET3_0 (0x001UL << ADC_OFR3_OFFSET3_Pos) /*!< 0x00000001 */ +#define ADC_OFR3_OFFSET3_1 (0x002UL << ADC_OFR3_OFFSET3_Pos) /*!< 0x00000002 */ +#define ADC_OFR3_OFFSET3_2 (0x004UL << ADC_OFR3_OFFSET3_Pos) /*!< 0x00000004 */ +#define ADC_OFR3_OFFSET3_3 (0x008UL << ADC_OFR3_OFFSET3_Pos) /*!< 0x00000008 */ +#define ADC_OFR3_OFFSET3_4 (0x010UL << ADC_OFR3_OFFSET3_Pos) /*!< 0x00000010 */ +#define ADC_OFR3_OFFSET3_5 (0x020UL << ADC_OFR3_OFFSET3_Pos) /*!< 0x00000020 */ +#define ADC_OFR3_OFFSET3_6 (0x040UL << ADC_OFR3_OFFSET3_Pos) /*!< 0x00000040 */ +#define ADC_OFR3_OFFSET3_7 (0x080UL << ADC_OFR3_OFFSET3_Pos) /*!< 0x00000080 */ +#define ADC_OFR3_OFFSET3_8 (0x100UL << ADC_OFR3_OFFSET3_Pos) /*!< 0x00000100 */ +#define ADC_OFR3_OFFSET3_9 (0x200UL << ADC_OFR3_OFFSET3_Pos) /*!< 0x00000200 */ +#define ADC_OFR3_OFFSET3_10 (0x400UL << ADC_OFR3_OFFSET3_Pos) /*!< 0x00000400 */ +#define ADC_OFR3_OFFSET3_11 (0x800UL << ADC_OFR3_OFFSET3_Pos) /*!< 0x00000800 */ + +#define ADC_OFR3_OFFSET3_CH_Pos (26U) +#define ADC_OFR3_OFFSET3_CH_Msk (0x1FUL << ADC_OFR3_OFFSET3_CH_Pos) /*!< 0x7C000000 */ +#define ADC_OFR3_OFFSET3_CH ADC_OFR3_OFFSET3_CH_Msk /*!< ADC offset number 3 channel selection */ +#define ADC_OFR3_OFFSET3_CH_0 (0x01UL << ADC_OFR3_OFFSET3_CH_Pos) /*!< 0x04000000 */ +#define ADC_OFR3_OFFSET3_CH_1 (0x02UL << ADC_OFR3_OFFSET3_CH_Pos) /*!< 0x08000000 */ +#define ADC_OFR3_OFFSET3_CH_2 (0x04UL << ADC_OFR3_OFFSET3_CH_Pos) /*!< 0x10000000 */ +#define ADC_OFR3_OFFSET3_CH_3 (0x08UL << ADC_OFR3_OFFSET3_CH_Pos) /*!< 0x20000000 */ +#define ADC_OFR3_OFFSET3_CH_4 (0x10UL << ADC_OFR3_OFFSET3_CH_Pos) /*!< 0x40000000 */ + +#define ADC_OFR3_OFFSET3_EN_Pos (31U) +#define ADC_OFR3_OFFSET3_EN_Msk (0x1UL << ADC_OFR3_OFFSET3_EN_Pos) /*!< 0x80000000 */ +#define ADC_OFR3_OFFSET3_EN ADC_OFR3_OFFSET3_EN_Msk /*!< ADC offset number 3 enable */ + +/******************** Bit definition for ADC_OFR4 register ******************/ +#define ADC_OFR4_OFFSET4_Pos (0U) +#define ADC_OFR4_OFFSET4_Msk (0xFFFUL << ADC_OFR4_OFFSET4_Pos) /*!< 0x00000FFF */ +#define ADC_OFR4_OFFSET4 ADC_OFR4_OFFSET4_Msk /*!< ADC offset number 4 offset level */ +#define ADC_OFR4_OFFSET4_0 (0x001UL << ADC_OFR4_OFFSET4_Pos) /*!< 0x00000001 */ +#define ADC_OFR4_OFFSET4_1 (0x002UL << ADC_OFR4_OFFSET4_Pos) /*!< 0x00000002 */ +#define ADC_OFR4_OFFSET4_2 (0x004UL << ADC_OFR4_OFFSET4_Pos) /*!< 0x00000004 */ +#define ADC_OFR4_OFFSET4_3 (0x008UL << ADC_OFR4_OFFSET4_Pos) /*!< 0x00000008 */ +#define ADC_OFR4_OFFSET4_4 (0x010UL << ADC_OFR4_OFFSET4_Pos) /*!< 0x00000010 */ +#define ADC_OFR4_OFFSET4_5 (0x020UL << ADC_OFR4_OFFSET4_Pos) /*!< 0x00000020 */ +#define ADC_OFR4_OFFSET4_6 (0x040UL << ADC_OFR4_OFFSET4_Pos) /*!< 0x00000040 */ +#define ADC_OFR4_OFFSET4_7 (0x080UL << ADC_OFR4_OFFSET4_Pos) /*!< 0x00000080 */ +#define ADC_OFR4_OFFSET4_8 (0x100UL << ADC_OFR4_OFFSET4_Pos) /*!< 0x00000100 */ +#define ADC_OFR4_OFFSET4_9 (0x200UL << ADC_OFR4_OFFSET4_Pos) /*!< 0x00000200 */ +#define ADC_OFR4_OFFSET4_10 (0x400UL << ADC_OFR4_OFFSET4_Pos) /*!< 0x00000400 */ +#define ADC_OFR4_OFFSET4_11 (0x800UL << ADC_OFR4_OFFSET4_Pos) /*!< 0x00000800 */ + +#define ADC_OFR4_OFFSET4_CH_Pos (26U) +#define ADC_OFR4_OFFSET4_CH_Msk (0x1FUL << ADC_OFR4_OFFSET4_CH_Pos) /*!< 0x7C000000 */ +#define ADC_OFR4_OFFSET4_CH ADC_OFR4_OFFSET4_CH_Msk /*!< ADC offset number 4 channel selection */ +#define ADC_OFR4_OFFSET4_CH_0 (0x01UL << ADC_OFR4_OFFSET4_CH_Pos) /*!< 0x04000000 */ +#define ADC_OFR4_OFFSET4_CH_1 (0x02UL << ADC_OFR4_OFFSET4_CH_Pos) /*!< 0x08000000 */ +#define ADC_OFR4_OFFSET4_CH_2 (0x04UL << ADC_OFR4_OFFSET4_CH_Pos) /*!< 0x10000000 */ +#define ADC_OFR4_OFFSET4_CH_3 (0x08UL << ADC_OFR4_OFFSET4_CH_Pos) /*!< 0x20000000 */ +#define ADC_OFR4_OFFSET4_CH_4 (0x10UL << ADC_OFR4_OFFSET4_CH_Pos) /*!< 0x40000000 */ + +#define ADC_OFR4_OFFSET4_EN_Pos (31U) +#define ADC_OFR4_OFFSET4_EN_Msk (0x1UL << ADC_OFR4_OFFSET4_EN_Pos) /*!< 0x80000000 */ +#define ADC_OFR4_OFFSET4_EN ADC_OFR4_OFFSET4_EN_Msk /*!< ADC offset number 4 enable */ + +/******************** Bit definition for ADC_JDR1 register ******************/ +#define ADC_JDR1_JDATA_Pos (0U) +#define ADC_JDR1_JDATA_Msk (0xFFFFUL << ADC_JDR1_JDATA_Pos) /*!< 0x0000FFFF */ +#define ADC_JDR1_JDATA ADC_JDR1_JDATA_Msk /*!< ADC group injected sequencer rank 1 conversion data */ +#define ADC_JDR1_JDATA_0 (0x0001UL << ADC_JDR1_JDATA_Pos) /*!< 0x00000001 */ +#define ADC_JDR1_JDATA_1 (0x0002UL << ADC_JDR1_JDATA_Pos) /*!< 0x00000002 */ +#define ADC_JDR1_JDATA_2 (0x0004UL << ADC_JDR1_JDATA_Pos) /*!< 0x00000004 */ +#define ADC_JDR1_JDATA_3 (0x0008UL << ADC_JDR1_JDATA_Pos) /*!< 0x00000008 */ +#define ADC_JDR1_JDATA_4 (0x0010UL << ADC_JDR1_JDATA_Pos) /*!< 0x00000010 */ +#define ADC_JDR1_JDATA_5 (0x0020UL << ADC_JDR1_JDATA_Pos) /*!< 0x00000020 */ +#define ADC_JDR1_JDATA_6 (0x0040UL << ADC_JDR1_JDATA_Pos) /*!< 0x00000040 */ +#define ADC_JDR1_JDATA_7 (0x0080UL << ADC_JDR1_JDATA_Pos) /*!< 0x00000080 */ +#define ADC_JDR1_JDATA_8 (0x0100UL << ADC_JDR1_JDATA_Pos) /*!< 0x00000100 */ +#define ADC_JDR1_JDATA_9 (0x0200UL << ADC_JDR1_JDATA_Pos) /*!< 0x00000200 */ +#define ADC_JDR1_JDATA_10 (0x0400UL << ADC_JDR1_JDATA_Pos) /*!< 0x00000400 */ +#define ADC_JDR1_JDATA_11 (0x0800UL << ADC_JDR1_JDATA_Pos) /*!< 0x00000800 */ +#define ADC_JDR1_JDATA_12 (0x1000UL << ADC_JDR1_JDATA_Pos) /*!< 0x00001000 */ +#define ADC_JDR1_JDATA_13 (0x2000UL << ADC_JDR1_JDATA_Pos) /*!< 0x00002000 */ +#define ADC_JDR1_JDATA_14 (0x4000UL << ADC_JDR1_JDATA_Pos) /*!< 0x00004000 */ +#define ADC_JDR1_JDATA_15 (0x8000UL << ADC_JDR1_JDATA_Pos) /*!< 0x00008000 */ + +/******************** Bit definition for ADC_JDR2 register ******************/ +#define ADC_JDR2_JDATA_Pos (0U) +#define ADC_JDR2_JDATA_Msk (0xFFFFUL << ADC_JDR2_JDATA_Pos) /*!< 0x0000FFFF */ +#define ADC_JDR2_JDATA ADC_JDR2_JDATA_Msk /*!< ADC group injected sequencer rank 2 conversion data */ +#define ADC_JDR2_JDATA_0 (0x0001UL << ADC_JDR2_JDATA_Pos) /*!< 0x00000001 */ +#define ADC_JDR2_JDATA_1 (0x0002UL << ADC_JDR2_JDATA_Pos) /*!< 0x00000002 */ +#define ADC_JDR2_JDATA_2 (0x0004UL << ADC_JDR2_JDATA_Pos) /*!< 0x00000004 */ +#define ADC_JDR2_JDATA_3 (0x0008UL << ADC_JDR2_JDATA_Pos) /*!< 0x00000008 */ +#define ADC_JDR2_JDATA_4 (0x0010UL << ADC_JDR2_JDATA_Pos) /*!< 0x00000010 */ +#define ADC_JDR2_JDATA_5 (0x0020UL << ADC_JDR2_JDATA_Pos) /*!< 0x00000020 */ +#define ADC_JDR2_JDATA_6 (0x0040UL << ADC_JDR2_JDATA_Pos) /*!< 0x00000040 */ +#define ADC_JDR2_JDATA_7 (0x0080UL << ADC_JDR2_JDATA_Pos) /*!< 0x00000080 */ +#define ADC_JDR2_JDATA_8 (0x0100UL << ADC_JDR2_JDATA_Pos) /*!< 0x00000100 */ +#define ADC_JDR2_JDATA_9 (0x0200UL << ADC_JDR2_JDATA_Pos) /*!< 0x00000200 */ +#define ADC_JDR2_JDATA_10 (0x0400UL << ADC_JDR2_JDATA_Pos) /*!< 0x00000400 */ +#define ADC_JDR2_JDATA_11 (0x0800UL << ADC_JDR2_JDATA_Pos) /*!< 0x00000800 */ +#define ADC_JDR2_JDATA_12 (0x1000UL << ADC_JDR2_JDATA_Pos) /*!< 0x00001000 */ +#define ADC_JDR2_JDATA_13 (0x2000UL << ADC_JDR2_JDATA_Pos) /*!< 0x00002000 */ +#define ADC_JDR2_JDATA_14 (0x4000UL << ADC_JDR2_JDATA_Pos) /*!< 0x00004000 */ +#define ADC_JDR2_JDATA_15 (0x8000UL << ADC_JDR2_JDATA_Pos) /*!< 0x00008000 */ + +/******************** Bit definition for ADC_JDR3 register ******************/ +#define ADC_JDR3_JDATA_Pos (0U) +#define ADC_JDR3_JDATA_Msk (0xFFFFUL << ADC_JDR3_JDATA_Pos) /*!< 0x0000FFFF */ +#define ADC_JDR3_JDATA ADC_JDR3_JDATA_Msk /*!< ADC group injected sequencer rank 3 conversion data */ +#define ADC_JDR3_JDATA_0 (0x0001UL << ADC_JDR3_JDATA_Pos) /*!< 0x00000001 */ +#define ADC_JDR3_JDATA_1 (0x0002UL << ADC_JDR3_JDATA_Pos) /*!< 0x00000002 */ +#define ADC_JDR3_JDATA_2 (0x0004UL << ADC_JDR3_JDATA_Pos) /*!< 0x00000004 */ +#define ADC_JDR3_JDATA_3 (0x0008UL << ADC_JDR3_JDATA_Pos) /*!< 0x00000008 */ +#define ADC_JDR3_JDATA_4 (0x0010UL << ADC_JDR3_JDATA_Pos) /*!< 0x00000010 */ +#define ADC_JDR3_JDATA_5 (0x0020UL << ADC_JDR3_JDATA_Pos) /*!< 0x00000020 */ +#define ADC_JDR3_JDATA_6 (0x0040UL << ADC_JDR3_JDATA_Pos) /*!< 0x00000040 */ +#define ADC_JDR3_JDATA_7 (0x0080UL << ADC_JDR3_JDATA_Pos) /*!< 0x00000080 */ +#define ADC_JDR3_JDATA_8 (0x0100UL << ADC_JDR3_JDATA_Pos) /*!< 0x00000100 */ +#define ADC_JDR3_JDATA_9 (0x0200UL << ADC_JDR3_JDATA_Pos) /*!< 0x00000200 */ +#define ADC_JDR3_JDATA_10 (0x0400UL << ADC_JDR3_JDATA_Pos) /*!< 0x00000400 */ +#define ADC_JDR3_JDATA_11 (0x0800UL << ADC_JDR3_JDATA_Pos) /*!< 0x00000800 */ +#define ADC_JDR3_JDATA_12 (0x1000UL << ADC_JDR3_JDATA_Pos) /*!< 0x00001000 */ +#define ADC_JDR3_JDATA_13 (0x2000UL << ADC_JDR3_JDATA_Pos) /*!< 0x00002000 */ +#define ADC_JDR3_JDATA_14 (0x4000UL << ADC_JDR3_JDATA_Pos) /*!< 0x00004000 */ +#define ADC_JDR3_JDATA_15 (0x8000UL << ADC_JDR3_JDATA_Pos) /*!< 0x00008000 */ + +/******************** Bit definition for ADC_JDR4 register ******************/ +#define ADC_JDR4_JDATA_Pos (0U) +#define ADC_JDR4_JDATA_Msk (0xFFFFUL << ADC_JDR4_JDATA_Pos) /*!< 0x0000FFFF */ +#define ADC_JDR4_JDATA ADC_JDR4_JDATA_Msk /*!< ADC group injected sequencer rank 4 conversion data */ +#define ADC_JDR4_JDATA_0 (0x0001UL << ADC_JDR4_JDATA_Pos) /*!< 0x00000001 */ +#define ADC_JDR4_JDATA_1 (0x0002UL << ADC_JDR4_JDATA_Pos) /*!< 0x00000002 */ +#define ADC_JDR4_JDATA_2 (0x0004UL << ADC_JDR4_JDATA_Pos) /*!< 0x00000004 */ +#define ADC_JDR4_JDATA_3 (0x0008UL << ADC_JDR4_JDATA_Pos) /*!< 0x00000008 */ +#define ADC_JDR4_JDATA_4 (0x0010UL << ADC_JDR4_JDATA_Pos) /*!< 0x00000010 */ +#define ADC_JDR4_JDATA_5 (0x0020UL << ADC_JDR4_JDATA_Pos) /*!< 0x00000020 */ +#define ADC_JDR4_JDATA_6 (0x0040UL << ADC_JDR4_JDATA_Pos) /*!< 0x00000040 */ +#define ADC_JDR4_JDATA_7 (0x0080UL << ADC_JDR4_JDATA_Pos) /*!< 0x00000080 */ +#define ADC_JDR4_JDATA_8 (0x0100UL << ADC_JDR4_JDATA_Pos) /*!< 0x00000100 */ +#define ADC_JDR4_JDATA_9 (0x0200UL << ADC_JDR4_JDATA_Pos) /*!< 0x00000200 */ +#define ADC_JDR4_JDATA_10 (0x0400UL << ADC_JDR4_JDATA_Pos) /*!< 0x00000400 */ +#define ADC_JDR4_JDATA_11 (0x0800UL << ADC_JDR4_JDATA_Pos) /*!< 0x00000800 */ +#define ADC_JDR4_JDATA_12 (0x1000UL << ADC_JDR4_JDATA_Pos) /*!< 0x00001000 */ +#define ADC_JDR4_JDATA_13 (0x2000UL << ADC_JDR4_JDATA_Pos) /*!< 0x00002000 */ +#define ADC_JDR4_JDATA_14 (0x4000UL << ADC_JDR4_JDATA_Pos) /*!< 0x00004000 */ +#define ADC_JDR4_JDATA_15 (0x8000UL << ADC_JDR4_JDATA_Pos) /*!< 0x00008000 */ + +/******************** Bit definition for ADC_AWD2CR register ****************/ +#define ADC_AWD2CR_AWD2CH_Pos (0U) +#define ADC_AWD2CR_AWD2CH_Msk (0x7FFFFUL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x0007FFFF */ +#define ADC_AWD2CR_AWD2CH ADC_AWD2CR_AWD2CH_Msk /*!< ADC analog watchdog 2 monitored channel selection */ +#define ADC_AWD2CR_AWD2CH_0 (0x00001UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000001 */ +#define ADC_AWD2CR_AWD2CH_1 (0x00002UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000002 */ +#define ADC_AWD2CR_AWD2CH_2 (0x00004UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000004 */ +#define ADC_AWD2CR_AWD2CH_3 (0x00008UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000008 */ +#define ADC_AWD2CR_AWD2CH_4 (0x00010UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000010 */ +#define ADC_AWD2CR_AWD2CH_5 (0x00020UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000020 */ +#define ADC_AWD2CR_AWD2CH_6 (0x00040UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000040 */ +#define ADC_AWD2CR_AWD2CH_7 (0x00080UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000080 */ +#define ADC_AWD2CR_AWD2CH_8 (0x00100UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000100 */ +#define ADC_AWD2CR_AWD2CH_9 (0x00200UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000200 */ +#define ADC_AWD2CR_AWD2CH_10 (0x00400UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000400 */ +#define ADC_AWD2CR_AWD2CH_11 (0x00800UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000800 */ +#define ADC_AWD2CR_AWD2CH_12 (0x01000UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00001000 */ +#define ADC_AWD2CR_AWD2CH_13 (0x02000UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00002000 */ +#define ADC_AWD2CR_AWD2CH_14 (0x04000UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00004000 */ +#define ADC_AWD2CR_AWD2CH_15 (0x08000UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00008000 */ +#define ADC_AWD2CR_AWD2CH_16 (0x10000UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00010000 */ +#define ADC_AWD2CR_AWD2CH_17 (0x20000UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00020000 */ +#define ADC_AWD2CR_AWD2CH_18 (0x40000UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00040000 */ + +/******************** Bit definition for ADC_AWD3CR register ****************/ +#define ADC_AWD3CR_AWD3CH_Pos (0U) +#define ADC_AWD3CR_AWD3CH_Msk (0x7FFFFUL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x0007FFFF */ +#define ADC_AWD3CR_AWD3CH ADC_AWD3CR_AWD3CH_Msk /*!< ADC analog watchdog 3 monitored channel selection */ +#define ADC_AWD3CR_AWD3CH_0 (0x00001UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000001 */ +#define ADC_AWD3CR_AWD3CH_1 (0x00002UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000002 */ +#define ADC_AWD3CR_AWD3CH_2 (0x00004UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000004 */ +#define ADC_AWD3CR_AWD3CH_3 (0x00008UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000008 */ +#define ADC_AWD3CR_AWD3CH_4 (0x00010UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000010 */ +#define ADC_AWD3CR_AWD3CH_5 (0x00020UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000020 */ +#define ADC_AWD3CR_AWD3CH_6 (0x00040UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000040 */ +#define ADC_AWD3CR_AWD3CH_7 (0x00080UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000080 */ +#define ADC_AWD3CR_AWD3CH_8 (0x00100UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000100 */ +#define ADC_AWD3CR_AWD3CH_9 (0x00200UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000200 */ +#define ADC_AWD3CR_AWD3CH_10 (0x00400UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000400 */ +#define ADC_AWD3CR_AWD3CH_11 (0x00800UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000800 */ +#define ADC_AWD3CR_AWD3CH_12 (0x01000UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00001000 */ +#define ADC_AWD3CR_AWD3CH_13 (0x02000UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00002000 */ +#define ADC_AWD3CR_AWD3CH_14 (0x04000UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00004000 */ +#define ADC_AWD3CR_AWD3CH_15 (0x08000UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00008000 */ +#define ADC_AWD3CR_AWD3CH_16 (0x10000UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00010000 */ +#define ADC_AWD3CR_AWD3CH_17 (0x20000UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00020000 */ +#define ADC_AWD3CR_AWD3CH_18 (0x40000UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00040000 */ + +/******************** Bit definition for ADC_DIFSEL register ****************/ +#define ADC_DIFSEL_DIFSEL_Pos (0U) +#define ADC_DIFSEL_DIFSEL_Msk (0x7FFFFUL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x0007FFFF */ +#define ADC_DIFSEL_DIFSEL ADC_DIFSEL_DIFSEL_Msk /*!< ADC channel differential or single-ended mode */ +#define ADC_DIFSEL_DIFSEL_0 (0x00001UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00000001 */ +#define ADC_DIFSEL_DIFSEL_1 (0x00002UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00000002 */ +#define ADC_DIFSEL_DIFSEL_2 (0x00004UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00000004 */ +#define ADC_DIFSEL_DIFSEL_3 (0x00008UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00000008 */ +#define ADC_DIFSEL_DIFSEL_4 (0x00010UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00000010 */ +#define ADC_DIFSEL_DIFSEL_5 (0x00020UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00000020 */ +#define ADC_DIFSEL_DIFSEL_6 (0x00040UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00000040 */ +#define ADC_DIFSEL_DIFSEL_7 (0x00080UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00000080 */ +#define ADC_DIFSEL_DIFSEL_8 (0x00100UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00000100 */ +#define ADC_DIFSEL_DIFSEL_9 (0x00200UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00000200 */ +#define ADC_DIFSEL_DIFSEL_10 (0x00400UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00000400 */ +#define ADC_DIFSEL_DIFSEL_11 (0x00800UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00000800 */ +#define ADC_DIFSEL_DIFSEL_12 (0x01000UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00001000 */ +#define ADC_DIFSEL_DIFSEL_13 (0x02000UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00002000 */ +#define ADC_DIFSEL_DIFSEL_14 (0x04000UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00004000 */ +#define ADC_DIFSEL_DIFSEL_15 (0x08000UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00008000 */ +#define ADC_DIFSEL_DIFSEL_16 (0x10000UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00010000 */ +#define ADC_DIFSEL_DIFSEL_17 (0x20000UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00020000 */ +#define ADC_DIFSEL_DIFSEL_18 (0x40000UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00040000 */ + +/******************** Bit definition for ADC_CALFACT register ***************/ +#define ADC_CALFACT_CALFACT_S_Pos (0U) +#define ADC_CALFACT_CALFACT_S_Msk (0x7FUL << ADC_CALFACT_CALFACT_S_Pos) /*!< 0x0000007F */ +#define ADC_CALFACT_CALFACT_S ADC_CALFACT_CALFACT_S_Msk /*!< ADC calibration factor in single-ended mode */ +#define ADC_CALFACT_CALFACT_S_0 (0x01UL << ADC_CALFACT_CALFACT_S_Pos) /*!< 0x00000001 */ +#define ADC_CALFACT_CALFACT_S_1 (0x02UL << ADC_CALFACT_CALFACT_S_Pos) /*!< 0x00000002 */ +#define ADC_CALFACT_CALFACT_S_2 (0x04UL << ADC_CALFACT_CALFACT_S_Pos) /*!< 0x00000004 */ +#define ADC_CALFACT_CALFACT_S_3 (0x08UL << ADC_CALFACT_CALFACT_S_Pos) /*!< 0x00000008 */ +#define ADC_CALFACT_CALFACT_S_4 (0x10UL << ADC_CALFACT_CALFACT_S_Pos) /*!< 0x00000010 */ +#define ADC_CALFACT_CALFACT_S_5 (0x20UL << ADC_CALFACT_CALFACT_S_Pos) /*!< 0x00000020 */ +#define ADC_CALFACT_CALFACT_S_6 (0x40UL << ADC_CALFACT_CALFACT_S_Pos) /*!< 0x00000040 */ + +#define ADC_CALFACT_CALFACT_D_Pos (16U) +#define ADC_CALFACT_CALFACT_D_Msk (0x7FUL << ADC_CALFACT_CALFACT_D_Pos) /*!< 0x007F0000 */ +#define ADC_CALFACT_CALFACT_D ADC_CALFACT_CALFACT_D_Msk /*!< ADC calibration factor in differential mode */ +#define ADC_CALFACT_CALFACT_D_0 (0x01UL << ADC_CALFACT_CALFACT_D_Pos) /*!< 0x00010000 */ +#define ADC_CALFACT_CALFACT_D_1 (0x02UL << ADC_CALFACT_CALFACT_D_Pos) /*!< 0x00020000 */ +#define ADC_CALFACT_CALFACT_D_2 (0x04UL << ADC_CALFACT_CALFACT_D_Pos) /*!< 0x00040000 */ +#define ADC_CALFACT_CALFACT_D_3 (0x08UL << ADC_CALFACT_CALFACT_D_Pos) /*!< 0x00080000 */ +#define ADC_CALFACT_CALFACT_D_4 (0x10UL << ADC_CALFACT_CALFACT_D_Pos) /*!< 0x00100000 */ +#define ADC_CALFACT_CALFACT_D_5 (0x20UL << ADC_CALFACT_CALFACT_D_Pos) /*!< 0x00200000 */ +#define ADC_CALFACT_CALFACT_D_6 (0x40UL << ADC_CALFACT_CALFACT_D_Pos) /*!< 0x00400000 */ + +/************************* ADC Common registers *****************************/ +/******************** Bit definition for ADC_CSR register *******************/ +#define ADC_CSR_ADRDY_MST_Pos (0U) +#define ADC_CSR_ADRDY_MST_Msk (0x1UL << ADC_CSR_ADRDY_MST_Pos) /*!< 0x00000001 */ +#define ADC_CSR_ADRDY_MST ADC_CSR_ADRDY_MST_Msk /*!< ADC multimode master ready flag */ +#define ADC_CSR_EOSMP_MST_Pos (1U) +#define ADC_CSR_EOSMP_MST_Msk (0x1UL << ADC_CSR_EOSMP_MST_Pos) /*!< 0x00000002 */ +#define ADC_CSR_EOSMP_MST ADC_CSR_EOSMP_MST_Msk /*!< ADC multimode master group regular end of sampling flag */ +#define ADC_CSR_EOC_MST_Pos (2U) +#define ADC_CSR_EOC_MST_Msk (0x1UL << ADC_CSR_EOC_MST_Pos) /*!< 0x00000004 */ +#define ADC_CSR_EOC_MST ADC_CSR_EOC_MST_Msk /*!< ADC multimode master group regular end of unitary conversion flag */ +#define ADC_CSR_EOS_MST_Pos (3U) +#define ADC_CSR_EOS_MST_Msk (0x1UL << ADC_CSR_EOS_MST_Pos) /*!< 0x00000008 */ +#define ADC_CSR_EOS_MST ADC_CSR_EOS_MST_Msk /*!< ADC multimode master group regular end of sequence conversions flag */ +#define ADC_CSR_OVR_MST_Pos (4U) +#define ADC_CSR_OVR_MST_Msk (0x1UL << ADC_CSR_OVR_MST_Pos) /*!< 0x00000010 */ +#define ADC_CSR_OVR_MST ADC_CSR_OVR_MST_Msk /*!< ADC multimode master group regular overrun flag */ +#define ADC_CSR_JEOC_MST_Pos (5U) +#define ADC_CSR_JEOC_MST_Msk (0x1UL << ADC_CSR_JEOC_MST_Pos) /*!< 0x00000020 */ +#define ADC_CSR_JEOC_MST ADC_CSR_JEOC_MST_Msk /*!< ADC multimode master group injected end of unitary conversion flag */ +#define ADC_CSR_JEOS_MST_Pos (6U) +#define ADC_CSR_JEOS_MST_Msk (0x1UL << ADC_CSR_JEOS_MST_Pos) /*!< 0x00000040 */ +#define ADC_CSR_JEOS_MST ADC_CSR_JEOS_MST_Msk /*!< ADC multimode master group injected end of sequence conversions flag */ +#define ADC_CSR_AWD1_MST_Pos (7U) +#define ADC_CSR_AWD1_MST_Msk (0x1UL << ADC_CSR_AWD1_MST_Pos) /*!< 0x00000080 */ +#define ADC_CSR_AWD1_MST ADC_CSR_AWD1_MST_Msk /*!< ADC multimode master analog watchdog 1 flag */ +#define ADC_CSR_AWD2_MST_Pos (8U) +#define ADC_CSR_AWD2_MST_Msk (0x1UL << ADC_CSR_AWD2_MST_Pos) /*!< 0x00000100 */ +#define ADC_CSR_AWD2_MST ADC_CSR_AWD2_MST_Msk /*!< ADC multimode master analog watchdog 2 flag */ +#define ADC_CSR_AWD3_MST_Pos (9U) +#define ADC_CSR_AWD3_MST_Msk (0x1UL << ADC_CSR_AWD3_MST_Pos) /*!< 0x00000200 */ +#define ADC_CSR_AWD3_MST ADC_CSR_AWD3_MST_Msk /*!< ADC multimode master analog watchdog 3 flag */ +#define ADC_CSR_JQOVF_MST_Pos (10U) +#define ADC_CSR_JQOVF_MST_Msk (0x1UL << ADC_CSR_JQOVF_MST_Pos) /*!< 0x00000400 */ +#define ADC_CSR_JQOVF_MST ADC_CSR_JQOVF_MST_Msk /*!< ADC multimode master group injected contexts queue overflow flag */ + +#define ADC_CSR_ADRDY_SLV_Pos (16U) +#define ADC_CSR_ADRDY_SLV_Msk (0x1UL << ADC_CSR_ADRDY_SLV_Pos) /*!< 0x00010000 */ +#define ADC_CSR_ADRDY_SLV ADC_CSR_ADRDY_SLV_Msk /*!< ADC multimode slave ready flag */ +#define ADC_CSR_EOSMP_SLV_Pos (17U) +#define ADC_CSR_EOSMP_SLV_Msk (0x1UL << ADC_CSR_EOSMP_SLV_Pos) /*!< 0x00020000 */ +#define ADC_CSR_EOSMP_SLV ADC_CSR_EOSMP_SLV_Msk /*!< ADC multimode slave group regular end of sampling flag */ +#define ADC_CSR_EOC_SLV_Pos (18U) +#define ADC_CSR_EOC_SLV_Msk (0x1UL << ADC_CSR_EOC_SLV_Pos) /*!< 0x00040000 */ +#define ADC_CSR_EOC_SLV ADC_CSR_EOC_SLV_Msk /*!< ADC multimode slave group regular end of unitary conversion flag */ +#define ADC_CSR_EOS_SLV_Pos (19U) +#define ADC_CSR_EOS_SLV_Msk (0x1UL << ADC_CSR_EOS_SLV_Pos) /*!< 0x00080000 */ +#define ADC_CSR_EOS_SLV ADC_CSR_EOS_SLV_Msk /*!< ADC multimode slave group regular end of sequence conversions flag */ +#define ADC_CSR_OVR_SLV_Pos (20U) +#define ADC_CSR_OVR_SLV_Msk (0x1UL << ADC_CSR_OVR_SLV_Pos) /*!< 0x00100000 */ +#define ADC_CSR_OVR_SLV ADC_CSR_OVR_SLV_Msk /*!< ADC multimode slave group regular overrun flag */ +#define ADC_CSR_JEOC_SLV_Pos (21U) +#define ADC_CSR_JEOC_SLV_Msk (0x1UL << ADC_CSR_JEOC_SLV_Pos) /*!< 0x00200000 */ +#define ADC_CSR_JEOC_SLV ADC_CSR_JEOC_SLV_Msk /*!< ADC multimode slave group injected end of unitary conversion flag */ +#define ADC_CSR_JEOS_SLV_Pos (22U) +#define ADC_CSR_JEOS_SLV_Msk (0x1UL << ADC_CSR_JEOS_SLV_Pos) /*!< 0x00400000 */ +#define ADC_CSR_JEOS_SLV ADC_CSR_JEOS_SLV_Msk /*!< ADC multimode slave group injected end of sequence conversions flag */ +#define ADC_CSR_AWD1_SLV_Pos (23U) +#define ADC_CSR_AWD1_SLV_Msk (0x1UL << ADC_CSR_AWD1_SLV_Pos) /*!< 0x00800000 */ +#define ADC_CSR_AWD1_SLV ADC_CSR_AWD1_SLV_Msk /*!< ADC multimode slave analog watchdog 1 flag */ +#define ADC_CSR_AWD2_SLV_Pos (24U) +#define ADC_CSR_AWD2_SLV_Msk (0x1UL << ADC_CSR_AWD2_SLV_Pos) /*!< 0x01000000 */ +#define ADC_CSR_AWD2_SLV ADC_CSR_AWD2_SLV_Msk /*!< ADC multimode slave analog watchdog 2 flag */ +#define ADC_CSR_AWD3_SLV_Pos (25U) +#define ADC_CSR_AWD3_SLV_Msk (0x1UL << ADC_CSR_AWD3_SLV_Pos) /*!< 0x02000000 */ +#define ADC_CSR_AWD3_SLV ADC_CSR_AWD3_SLV_Msk /*!< ADC multimode slave analog watchdog 3 flag */ +#define ADC_CSR_JQOVF_SLV_Pos (26U) +#define ADC_CSR_JQOVF_SLV_Msk (0x1UL << ADC_CSR_JQOVF_SLV_Pos) /*!< 0x04000000 */ +#define ADC_CSR_JQOVF_SLV ADC_CSR_JQOVF_SLV_Msk /*!< ADC multimode slave group injected contexts queue overflow flag */ + +/******************** Bit definition for ADC_CCR register *******************/ +#define ADC_CCR_DUAL_Pos (0U) +#define ADC_CCR_DUAL_Msk (0x1FUL << ADC_CCR_DUAL_Pos) /*!< 0x0000001F */ +#define ADC_CCR_DUAL ADC_CCR_DUAL_Msk /*!< ADC multimode mode selection */ +#define ADC_CCR_DUAL_0 (0x01UL << ADC_CCR_DUAL_Pos) /*!< 0x00000001 */ +#define ADC_CCR_DUAL_1 (0x02UL << ADC_CCR_DUAL_Pos) /*!< 0x00000002 */ +#define ADC_CCR_DUAL_2 (0x04UL << ADC_CCR_DUAL_Pos) /*!< 0x00000004 */ +#define ADC_CCR_DUAL_3 (0x08UL << ADC_CCR_DUAL_Pos) /*!< 0x00000008 */ +#define ADC_CCR_DUAL_4 (0x10UL << ADC_CCR_DUAL_Pos) /*!< 0x00000010 */ + +#define ADC_CCR_DELAY_Pos (8U) +#define ADC_CCR_DELAY_Msk (0xFUL << ADC_CCR_DELAY_Pos) /*!< 0x00000F00 */ +#define ADC_CCR_DELAY ADC_CCR_DELAY_Msk /*!< ADC multimode delay between 2 sampling phases */ +#define ADC_CCR_DELAY_0 (0x1UL << ADC_CCR_DELAY_Pos) /*!< 0x00000100 */ +#define ADC_CCR_DELAY_1 (0x2UL << ADC_CCR_DELAY_Pos) /*!< 0x00000200 */ +#define ADC_CCR_DELAY_2 (0x4UL << ADC_CCR_DELAY_Pos) /*!< 0x00000400 */ +#define ADC_CCR_DELAY_3 (0x8UL << ADC_CCR_DELAY_Pos) /*!< 0x00000800 */ + +#define ADC_CCR_DMACFG_Pos (13U) +#define ADC_CCR_DMACFG_Msk (0x1UL << ADC_CCR_DMACFG_Pos) /*!< 0x00002000 */ +#define ADC_CCR_DMACFG ADC_CCR_DMACFG_Msk /*!< ADC multimode DMA transfer configuration */ + +#define ADC_CCR_MDMA_Pos (14U) +#define ADC_CCR_MDMA_Msk (0x3UL << ADC_CCR_MDMA_Pos) /*!< 0x0000C000 */ +#define ADC_CCR_MDMA ADC_CCR_MDMA_Msk /*!< ADC multimode DMA transfer enable */ +#define ADC_CCR_MDMA_0 (0x1UL << ADC_CCR_MDMA_Pos) /*!< 0x00004000 */ +#define ADC_CCR_MDMA_1 (0x2UL << ADC_CCR_MDMA_Pos) /*!< 0x00008000 */ + +#define ADC_CCR_CKMODE_Pos (16U) +#define ADC_CCR_CKMODE_Msk (0x3UL << ADC_CCR_CKMODE_Pos) /*!< 0x00030000 */ +#define ADC_CCR_CKMODE ADC_CCR_CKMODE_Msk /*!< ADC common clock source and prescaler (prescaler only for clock source synchronous) */ +#define ADC_CCR_CKMODE_0 (0x1UL << ADC_CCR_CKMODE_Pos) /*!< 0x00010000 */ +#define ADC_CCR_CKMODE_1 (0x2UL << ADC_CCR_CKMODE_Pos) /*!< 0x00020000 */ + +#define ADC_CCR_PRESC_Pos (18U) +#define ADC_CCR_PRESC_Msk (0xFUL << ADC_CCR_PRESC_Pos) /*!< 0x003C0000 */ +#define ADC_CCR_PRESC ADC_CCR_PRESC_Msk /*!< ADC common clock prescaler, only for clock source asynchronous */ +#define ADC_CCR_PRESC_0 (0x1UL << ADC_CCR_PRESC_Pos) /*!< 0x00040000 */ +#define ADC_CCR_PRESC_1 (0x2UL << ADC_CCR_PRESC_Pos) /*!< 0x00080000 */ +#define ADC_CCR_PRESC_2 (0x4UL << ADC_CCR_PRESC_Pos) /*!< 0x00100000 */ +#define ADC_CCR_PRESC_3 (0x8UL << ADC_CCR_PRESC_Pos) /*!< 0x00200000 */ + +#define ADC_CCR_VREFEN_Pos (22U) +#define ADC_CCR_VREFEN_Msk (0x1UL << ADC_CCR_VREFEN_Pos) /*!< 0x00400000 */ +#define ADC_CCR_VREFEN ADC_CCR_VREFEN_Msk /*!< ADC internal path to VrefInt enable */ +#define ADC_CCR_TSEN_Pos (23U) +#define ADC_CCR_TSEN_Msk (0x1UL << ADC_CCR_TSEN_Pos) /*!< 0x00800000 */ +#define ADC_CCR_TSEN ADC_CCR_TSEN_Msk /*!< ADC internal path to temperature sensor enable */ +#define ADC_CCR_VBATEN_Pos (24U) +#define ADC_CCR_VBATEN_Msk (0x1UL << ADC_CCR_VBATEN_Pos) /*!< 0x01000000 */ +#define ADC_CCR_VBATEN ADC_CCR_VBATEN_Msk /*!< ADC internal path to battery voltage enable */ + +/******************** Bit definition for ADC_CDR register *******************/ +#define ADC_CDR_RDATA_MST_Pos (0U) +#define ADC_CDR_RDATA_MST_Msk (0xFFFFUL << ADC_CDR_RDATA_MST_Pos) /*!< 0x0000FFFF */ +#define ADC_CDR_RDATA_MST ADC_CDR_RDATA_MST_Msk /*!< ADC multimode master group regular conversion data */ +#define ADC_CDR_RDATA_MST_0 (0x0001UL << ADC_CDR_RDATA_MST_Pos) /*!< 0x00000001 */ +#define ADC_CDR_RDATA_MST_1 (0x0002UL << ADC_CDR_RDATA_MST_Pos) /*!< 0x00000002 */ +#define ADC_CDR_RDATA_MST_2 (0x0004UL << ADC_CDR_RDATA_MST_Pos) /*!< 0x00000004 */ +#define ADC_CDR_RDATA_MST_3 (0x0008UL << ADC_CDR_RDATA_MST_Pos) /*!< 0x00000008 */ +#define ADC_CDR_RDATA_MST_4 (0x0010UL << ADC_CDR_RDATA_MST_Pos) /*!< 0x00000010 */ +#define ADC_CDR_RDATA_MST_5 (0x0020UL << ADC_CDR_RDATA_MST_Pos) /*!< 0x00000020 */ +#define ADC_CDR_RDATA_MST_6 (0x0040UL << ADC_CDR_RDATA_MST_Pos) /*!< 0x00000040 */ +#define ADC_CDR_RDATA_MST_7 (0x0080UL << ADC_CDR_RDATA_MST_Pos) /*!< 0x00000080 */ +#define ADC_CDR_RDATA_MST_8 (0x0100UL << ADC_CDR_RDATA_MST_Pos) /*!< 0x00000100 */ +#define ADC_CDR_RDATA_MST_9 (0x0200UL << ADC_CDR_RDATA_MST_Pos) /*!< 0x00000200 */ +#define ADC_CDR_RDATA_MST_10 (0x0400UL << ADC_CDR_RDATA_MST_Pos) /*!< 0x00000400 */ +#define ADC_CDR_RDATA_MST_11 (0x0800UL << ADC_CDR_RDATA_MST_Pos) /*!< 0x00000800 */ +#define ADC_CDR_RDATA_MST_12 (0x1000UL << ADC_CDR_RDATA_MST_Pos) /*!< 0x00001000 */ +#define ADC_CDR_RDATA_MST_13 (0x2000UL << ADC_CDR_RDATA_MST_Pos) /*!< 0x00002000 */ +#define ADC_CDR_RDATA_MST_14 (0x4000UL << ADC_CDR_RDATA_MST_Pos) /*!< 0x00004000 */ +#define ADC_CDR_RDATA_MST_15 (0x8000UL << ADC_CDR_RDATA_MST_Pos) /*!< 0x00008000 */ + +#define ADC_CDR_RDATA_SLV_Pos (16U) +#define ADC_CDR_RDATA_SLV_Msk (0xFFFFUL << ADC_CDR_RDATA_SLV_Pos) /*!< 0xFFFF0000 */ +#define ADC_CDR_RDATA_SLV ADC_CDR_RDATA_SLV_Msk /*!< ADC multimode slave group regular conversion data */ +#define ADC_CDR_RDATA_SLV_0 (0x0001UL << ADC_CDR_RDATA_SLV_Pos) /*!< 0x00010000 */ +#define ADC_CDR_RDATA_SLV_1 (0x0002UL << ADC_CDR_RDATA_SLV_Pos) /*!< 0x00020000 */ +#define ADC_CDR_RDATA_SLV_2 (0x0004UL << ADC_CDR_RDATA_SLV_Pos) /*!< 0x00040000 */ +#define ADC_CDR_RDATA_SLV_3 (0x0008UL << ADC_CDR_RDATA_SLV_Pos) /*!< 0x00080000 */ +#define ADC_CDR_RDATA_SLV_4 (0x0010UL << ADC_CDR_RDATA_SLV_Pos) /*!< 0x00100000 */ +#define ADC_CDR_RDATA_SLV_5 (0x0020UL << ADC_CDR_RDATA_SLV_Pos) /*!< 0x00200000 */ +#define ADC_CDR_RDATA_SLV_6 (0x0040UL << ADC_CDR_RDATA_SLV_Pos) /*!< 0x00400000 */ +#define ADC_CDR_RDATA_SLV_7 (0x0080UL << ADC_CDR_RDATA_SLV_Pos) /*!< 0x00800000 */ +#define ADC_CDR_RDATA_SLV_8 (0x0100UL << ADC_CDR_RDATA_SLV_Pos) /*!< 0x01000000 */ +#define ADC_CDR_RDATA_SLV_9 (0x0200UL << ADC_CDR_RDATA_SLV_Pos) /*!< 0x02000000 */ +#define ADC_CDR_RDATA_SLV_10 (0x0400UL << ADC_CDR_RDATA_SLV_Pos) /*!< 0x04000000 */ +#define ADC_CDR_RDATA_SLV_11 (0x0800UL << ADC_CDR_RDATA_SLV_Pos) /*!< 0x08000000 */ +#define ADC_CDR_RDATA_SLV_12 (0x1000UL << ADC_CDR_RDATA_SLV_Pos) /*!< 0x10000000 */ +#define ADC_CDR_RDATA_SLV_13 (0x2000UL << ADC_CDR_RDATA_SLV_Pos) /*!< 0x20000000 */ +#define ADC_CDR_RDATA_SLV_14 (0x4000UL << ADC_CDR_RDATA_SLV_Pos) /*!< 0x40000000 */ +#define ADC_CDR_RDATA_SLV_15 (0x8000UL << ADC_CDR_RDATA_SLV_Pos) /*!< 0x80000000 */ + +/******************************************************************************/ +/* */ +/* Controller Area Network */ +/* */ +/******************************************************************************/ +/*!*/ +#define DAC_CR_CEN1_Pos (14U) +#define DAC_CR_CEN1_Msk (0x1UL << DAC_CR_CEN1_Pos) /*!< 0x00004000 */ +#define DAC_CR_CEN1 DAC_CR_CEN1_Msk /*!*/ + +#define DAC_CR_EN2_Pos (16U) +#define DAC_CR_EN2_Msk (0x1UL << DAC_CR_EN2_Pos) /*!< 0x00010000 */ +#define DAC_CR_EN2 DAC_CR_EN2_Msk /*!*/ +#define DAC_CR_CEN2_Pos (30U) +#define DAC_CR_CEN2_Msk (0x1UL << DAC_CR_CEN2_Pos) /*!< 0x40000000 */ +#define DAC_CR_CEN2 DAC_CR_CEN2_Msk /*!*/ + +/***************** Bit definition for DAC_SWTRIGR register ******************/ +#define DAC_SWTRIGR_SWTRIG1_Pos (0U) +#define DAC_SWTRIGR_SWTRIG1_Msk (0x1UL << DAC_SWTRIGR_SWTRIG1_Pos) /*!< 0x00000001 */ +#define DAC_SWTRIGR_SWTRIG1 DAC_SWTRIGR_SWTRIG1_Msk /*!APB1FZR1, DBGMCU_APB1FZR1_DBG_TIM2_STOP) -#define __HAL_DBGMCU_UNFREEZE_TIM2() CLEAR_BIT(DBGMCU->APB1FZR1, DBGMCU_APB1FZR1_DBG_TIM2_STOP) -#endif - -#if defined(DBGMCU_APB1FZR1_DBG_TIM3_STOP) -#define __HAL_DBGMCU_FREEZE_TIM3() SET_BIT(DBGMCU->APB1FZR1, DBGMCU_APB1FZR1_DBG_TIM3_STOP) -#define __HAL_DBGMCU_UNFREEZE_TIM3() CLEAR_BIT(DBGMCU->APB1FZR1, DBGMCU_APB1FZR1_DBG_TIM3_STOP) -#endif - -#if defined(DBGMCU_APB1FZR1_DBG_TIM4_STOP) -#define __HAL_DBGMCU_FREEZE_TIM4() SET_BIT(DBGMCU->APB1FZR1, DBGMCU_APB1FZR1_DBG_TIM4_STOP) -#define __HAL_DBGMCU_UNFREEZE_TIM4() CLEAR_BIT(DBGMCU->APB1FZR1, DBGMCU_APB1FZR1_DBG_TIM4_STOP) -#endif - -#if defined(DBGMCU_APB1FZR1_DBG_TIM5_STOP) -#define __HAL_DBGMCU_FREEZE_TIM5() SET_BIT(DBGMCU->APB1FZR1, DBGMCU_APB1FZR1_DBG_TIM5_STOP) -#define __HAL_DBGMCU_UNFREEZE_TIM5() CLEAR_BIT(DBGMCU->APB1FZR1, DBGMCU_APB1FZR1_DBG_TIM5_STOP) -#endif - -#if defined(DBGMCU_APB1FZR1_DBG_TIM6_STOP) -#define __HAL_DBGMCU_FREEZE_TIM6() SET_BIT(DBGMCU->APB1FZR1, DBGMCU_APB1FZR1_DBG_TIM6_STOP) -#define __HAL_DBGMCU_UNFREEZE_TIM6() CLEAR_BIT(DBGMCU->APB1FZR1, DBGMCU_APB1FZR1_DBG_TIM6_STOP) -#endif - -#if defined(DBGMCU_APB1FZR1_DBG_TIM7_STOP) -#define __HAL_DBGMCU_FREEZE_TIM7() SET_BIT(DBGMCU->APB1FZR1, DBGMCU_APB1FZR1_DBG_TIM7_STOP) -#define __HAL_DBGMCU_UNFREEZE_TIM7() CLEAR_BIT(DBGMCU->APB1FZR1, DBGMCU_APB1FZR1_DBG_TIM7_STOP) -#endif - -#if defined(DBGMCU_APB1FZR1_DBG_RTC_STOP) -#define __HAL_DBGMCU_FREEZE_RTC() SET_BIT(DBGMCU->APB1FZR1, DBGMCU_APB1FZR1_DBG_RTC_STOP) -#define __HAL_DBGMCU_UNFREEZE_RTC() CLEAR_BIT(DBGMCU->APB1FZR1, DBGMCU_APB1FZR1_DBG_RTC_STOP) -#endif - -#if defined(DBGMCU_APB1FZR1_DBG_WWDG_STOP) -#define __HAL_DBGMCU_FREEZE_WWDG() SET_BIT(DBGMCU->APB1FZR1, DBGMCU_APB1FZR1_DBG_WWDG_STOP) -#define __HAL_DBGMCU_UNFREEZE_WWDG() CLEAR_BIT(DBGMCU->APB1FZR1, DBGMCU_APB1FZR1_DBG_WWDG_STOP) -#endif - -#if defined(DBGMCU_APB1FZR1_DBG_IWDG_STOP) -#define __HAL_DBGMCU_FREEZE_IWDG() SET_BIT(DBGMCU->APB1FZR1, DBGMCU_APB1FZR1_DBG_IWDG_STOP) -#define __HAL_DBGMCU_UNFREEZE_IWDG() CLEAR_BIT(DBGMCU->APB1FZR1, DBGMCU_APB1FZR1_DBG_IWDG_STOP) -#endif - -#if defined(DBGMCU_APB1FZR1_DBG_I2C1_STOP) -#define __HAL_DBGMCU_FREEZE_I2C1_TIMEOUT() SET_BIT(DBGMCU->APB1FZR1, DBGMCU_APB1FZR1_DBG_I2C1_STOP) -#define __HAL_DBGMCU_UNFREEZE_I2C1_TIMEOUT() CLEAR_BIT(DBGMCU->APB1FZR1, DBGMCU_APB1FZR1_DBG_I2C1_STOP) -#endif - -#if defined(DBGMCU_APB1FZR1_DBG_I2C2_STOP) -#define __HAL_DBGMCU_FREEZE_I2C2_TIMEOUT() SET_BIT(DBGMCU->APB1FZR1, DBGMCU_APB1FZR1_DBG_I2C2_STOP) -#define __HAL_DBGMCU_UNFREEZE_I2C2_TIMEOUT() CLEAR_BIT(DBGMCU->APB1FZR1, DBGMCU_APB1FZR1_DBG_I2C2_STOP) -#endif - -#if defined(DBGMCU_APB1FZR1_DBG_I2C3_STOP) -#define __HAL_DBGMCU_FREEZE_I2C3_TIMEOUT() SET_BIT(DBGMCU->APB1FZR1, DBGMCU_APB1FZR1_DBG_I2C3_STOP) -#define __HAL_DBGMCU_UNFREEZE_I2C3_TIMEOUT() CLEAR_BIT(DBGMCU->APB1FZR1, DBGMCU_APB1FZR1_DBG_I2C3_STOP) -#endif - -#if defined(DBGMCU_APB1FZR2_DBG_I2C4_STOP) -#define __HAL_DBGMCU_FREEZE_I2C4_TIMEOUT() SET_BIT(DBGMCU->APB1FZR2, DBGMCU_APB1FZR2_DBG_I2C4_STOP) -#define __HAL_DBGMCU_UNFREEZE_I2C4_TIMEOUT() CLEAR_BIT(DBGMCU->APB1FZR2, DBGMCU_APB1FZR2_DBG_I2C4_STOP) -#endif - -#if defined(DBGMCU_APB1FZR1_DBG_CAN_STOP) -#define __HAL_DBGMCU_FREEZE_CAN1() SET_BIT(DBGMCU->APB1FZR1, DBGMCU_APB1FZR1_DBG_CAN_STOP) -#define __HAL_DBGMCU_UNFREEZE_CAN1() CLEAR_BIT(DBGMCU->APB1FZR1, DBGMCU_APB1FZR1_DBG_CAN_STOP) -#endif - -#if defined(DBGMCU_APB1FZR1_DBG_CAN2_STOP) -#define __HAL_DBGMCU_FREEZE_CAN2() SET_BIT(DBGMCU->APB1FZR1, DBGMCU_APB1FZR1_DBG_CAN2_STOP) -#define __HAL_DBGMCU_UNFREEZE_CAN2() CLEAR_BIT(DBGMCU->APB1FZR1, DBGMCU_APB1FZR1_DBG_CAN2_STOP) -#endif - -#if defined(DBGMCU_APB1FZR1_DBG_LPTIM1_STOP) -#define __HAL_DBGMCU_FREEZE_LPTIM1() SET_BIT(DBGMCU->APB1FZR1, DBGMCU_APB1FZR1_DBG_LPTIM1_STOP) -#define __HAL_DBGMCU_UNFREEZE_LPTIM1() CLEAR_BIT(DBGMCU->APB1FZR1, DBGMCU_APB1FZR1_DBG_LPTIM1_STOP) -#endif - -#if defined(DBGMCU_APB1FZR2_DBG_LPTIM2_STOP) -#define __HAL_DBGMCU_FREEZE_LPTIM2() SET_BIT(DBGMCU->APB1FZR2, DBGMCU_APB1FZR2_DBG_LPTIM2_STOP) -#define __HAL_DBGMCU_UNFREEZE_LPTIM2() CLEAR_BIT(DBGMCU->APB1FZR2, DBGMCU_APB1FZR2_DBG_LPTIM2_STOP) -#endif - -#if defined(DBGMCU_APB2FZ_DBG_TIM1_STOP) -#define __HAL_DBGMCU_FREEZE_TIM1() SET_BIT(DBGMCU->APB2FZ, DBGMCU_APB2FZ_DBG_TIM1_STOP) -#define __HAL_DBGMCU_UNFREEZE_TIM1() CLEAR_BIT(DBGMCU->APB2FZ, DBGMCU_APB2FZ_DBG_TIM1_STOP) -#endif - -#if defined(DBGMCU_APB2FZ_DBG_TIM8_STOP) -#define __HAL_DBGMCU_FREEZE_TIM8() SET_BIT(DBGMCU->APB2FZ, DBGMCU_APB2FZ_DBG_TIM8_STOP) -#define __HAL_DBGMCU_UNFREEZE_TIM8() CLEAR_BIT(DBGMCU->APB2FZ, DBGMCU_APB2FZ_DBG_TIM8_STOP) -#endif - -#if defined(DBGMCU_APB2FZ_DBG_TIM15_STOP) -#define __HAL_DBGMCU_FREEZE_TIM15() SET_BIT(DBGMCU->APB2FZ, DBGMCU_APB2FZ_DBG_TIM15_STOP) -#define __HAL_DBGMCU_UNFREEZE_TIM15() CLEAR_BIT(DBGMCU->APB2FZ, DBGMCU_APB2FZ_DBG_TIM15_STOP) -#endif - -#if defined(DBGMCU_APB2FZ_DBG_TIM16_STOP) -#define __HAL_DBGMCU_FREEZE_TIM16() SET_BIT(DBGMCU->APB2FZ, DBGMCU_APB2FZ_DBG_TIM16_STOP) -#define __HAL_DBGMCU_UNFREEZE_TIM16() CLEAR_BIT(DBGMCU->APB2FZ, DBGMCU_APB2FZ_DBG_TIM16_STOP) -#endif - -#if defined(DBGMCU_APB2FZ_DBG_TIM17_STOP) -#define __HAL_DBGMCU_FREEZE_TIM17() SET_BIT(DBGMCU->APB2FZ, DBGMCU_APB2FZ_DBG_TIM17_STOP) -#define __HAL_DBGMCU_UNFREEZE_TIM17() CLEAR_BIT(DBGMCU->APB2FZ, DBGMCU_APB2FZ_DBG_TIM17_STOP) -#endif - -/** - * @} - */ - -/** @defgroup SYSCFG_Exported_Macros SYSCFG Exported Macros - * @{ - */ - -/** @brief Main Flash memory mapped at 0x00000000. - */ -#define __HAL_SYSCFG_REMAPMEMORY_FLASH() CLEAR_BIT(SYSCFG->MEMRMP, SYSCFG_MEMRMP_MEM_MODE) - -/** @brief System Flash memory mapped at 0x00000000. - */ -#define __HAL_SYSCFG_REMAPMEMORY_SYSTEMFLASH() MODIFY_REG(SYSCFG->MEMRMP, SYSCFG_MEMRMP_MEM_MODE, SYSCFG_MEMRMP_MEM_MODE_0) - -/** @brief Embedded SRAM mapped at 0x00000000. - */ -#define __HAL_SYSCFG_REMAPMEMORY_SRAM() MODIFY_REG(SYSCFG->MEMRMP, SYSCFG_MEMRMP_MEM_MODE, (SYSCFG_MEMRMP_MEM_MODE_1|SYSCFG_MEMRMP_MEM_MODE_0)) - -#if defined (STM32L471xx) || defined (STM32L475xx) || defined (STM32L476xx) || defined (STM32L485xx) || defined (STM32L486xx) || \ - defined (STM32L496xx) || defined (STM32L4A6xx) || \ - defined (STM32L4P5xx) || defined (STM32L4Q5xx) || \ - defined (STM32L4R5xx) || defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined (STM32L4S9xx) - -/** @brief FMC Bank1 (NOR/PSRAM 1 and 2) mapped at 0x00000000. - */ -#define __HAL_SYSCFG_REMAPMEMORY_FMC() MODIFY_REG(SYSCFG->MEMRMP, SYSCFG_MEMRMP_MEM_MODE, SYSCFG_MEMRMP_MEM_MODE_1) - -#endif /* STM32L471xx || STM32L475xx || STM32L476xx || STM32L485xx || STM32L486xx || */ - /* STM32L496xx || STM32L4A6xx || */ - /* STM32L4P5xx || STM32L4Q5xx || */ - /* STM32L4R5xx || STM32L4R7xx || STM32L4R9xx || STM32L4S5xx || STM32L4S7xx || STM32L4S9xx */ - -#if defined (STM32L4P5xx) || defined (STM32L4Q5xx) || defined (STM32L4R5xx) || defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined (STM32L4S9xx) - -/** @brief OCTOSPI mapped at 0x00000000. - */ -#define __HAL_SYSCFG_REMAPMEMORY_OCTOSPI1() MODIFY_REG(SYSCFG->MEMRMP, SYSCFG_MEMRMP_MEM_MODE, (SYSCFG_MEMRMP_MEM_MODE_2)) -#define __HAL_SYSCFG_REMAPMEMORY_OCTOSPI2() MODIFY_REG(SYSCFG->MEMRMP, SYSCFG_MEMRMP_MEM_MODE, (SYSCFG_MEMRMP_MEM_MODE_2|SYSCFG_MEMRMP_MEM_MODE_0)) - -#else - -/** @brief QUADSPI mapped at 0x00000000. - */ -#define __HAL_SYSCFG_REMAPMEMORY_QUADSPI() MODIFY_REG(SYSCFG->MEMRMP, SYSCFG_MEMRMP_MEM_MODE, (SYSCFG_MEMRMP_MEM_MODE_2|SYSCFG_MEMRMP_MEM_MODE_1)) - -#endif /* STM32L4P5xx || STM32L4Q5xx || STM32L4R5xx || STM32L4R7xx || STM32L4R9xx || STM32L4S5xx || STM32L4S7xx || STM32L4S9xx */ - -/** - * @brief Return the boot mode as configured by user. - * @retval The boot mode as configured by user. The returned value can be one - * of the following values: - * @arg @ref SYSCFG_BOOT_MAINFLASH - * @arg @ref SYSCFG_BOOT_SYSTEMFLASH - @if STM32L486xx - * @arg @ref SYSCFG_BOOT_FMC - @endif - * @arg @ref SYSCFG_BOOT_SRAM - @if STM32L422xx - * @arg @ref SYSCFG_BOOT_QUADSPI - @endif - @if STM32L443xx - * @arg @ref SYSCFG_BOOT_QUADSPI - @endif - @if STM32L462xx - * @arg @ref SYSCFG_BOOT_QUADSPI - @endif - @if STM32L486xx - * @arg @ref SYSCFG_BOOT_QUADSPI - @endif - */ -#define __HAL_SYSCFG_GET_BOOT_MODE() READ_BIT(SYSCFG->MEMRMP, SYSCFG_MEMRMP_MEM_MODE) - -/** @brief SRAM2 page 0 to 31 write protection enable macro - * @param __SRAM2WRP__ This parameter can be a combination of values of @ref SYSCFG_SRAM2WRP - * @note Write protection can only be disabled by a system reset - */ -#define __HAL_SYSCFG_SRAM2_WRP_1_31_ENABLE(__SRAM2WRP__) do {assert_param(IS_SYSCFG_SRAM2WRP_PAGE((__SRAM2WRP__)));\ - SET_BIT(SYSCFG->SWPR, (__SRAM2WRP__));\ - }while(0) - -#if defined(SYSCFG_SWPR2_PAGE63) -/** @brief SRAM2 page 32 to 63 write protection enable macro - * @param __SRAM2WRP__ This parameter can be a combination of values of @ref SYSCFG_SRAM2WRP_32_63 - * @note Write protection can only be disabled by a system reset - */ -#define __HAL_SYSCFG_SRAM2_WRP_32_63_ENABLE(__SRAM2WRP__) do {assert_param(IS_SYSCFG_SRAM2WRP_PAGE((__SRAM2WRP__)));\ - SET_BIT(SYSCFG->SWPR2, (__SRAM2WRP__));\ - }while(0) -#endif /* SYSCFG_SWPR2_PAGE63 */ - -/** @brief SRAM2 page write protection unlock prior to erase - * @note Writing a wrong key reactivates the write protection - */ -#define __HAL_SYSCFG_SRAM2_WRP_UNLOCK() do {SYSCFG->SKR = 0xCA;\ - SYSCFG->SKR = 0x53;\ - }while(0) - -/** @brief SRAM2 erase - * @note __SYSCFG_GET_FLAG(SYSCFG_FLAG_SRAM2_BUSY) may be used to check end of erase - */ -#define __HAL_SYSCFG_SRAM2_ERASE() SET_BIT(SYSCFG->SCSR, SYSCFG_SCSR_SRAM2ER) - -/** @brief Floating Point Unit interrupt enable/disable macros - * @param __INTERRUPT__ This parameter can be a value of @ref SYSCFG_FPU_Interrupts - */ -#define __HAL_SYSCFG_FPU_INTERRUPT_ENABLE(__INTERRUPT__) do {assert_param(IS_SYSCFG_FPU_INTERRUPT((__INTERRUPT__)));\ - SET_BIT(SYSCFG->CFGR1, (__INTERRUPT__));\ - }while(0) - -#define __HAL_SYSCFG_FPU_INTERRUPT_DISABLE(__INTERRUPT__) do {assert_param(IS_SYSCFG_FPU_INTERRUPT((__INTERRUPT__)));\ - CLEAR_BIT(SYSCFG->CFGR1, (__INTERRUPT__));\ - }while(0) - -/** @brief SYSCFG Break ECC lock. - * Enable and lock the connection of Flash ECC error connection to TIM1/8/15/16/17 Break input. - * @note The selected configuration is locked and can be unlocked only by system reset. - */ -#define __HAL_SYSCFG_BREAK_ECC_LOCK() SET_BIT(SYSCFG->CFGR2, SYSCFG_CFGR2_ECCL) - -/** @brief SYSCFG Break Cortex-M4 Lockup lock. - * Enable and lock the connection of Cortex-M4 LOCKUP (Hardfault) output to TIM1/8/15/16/17 Break input. - * @note The selected configuration is locked and can be unlocked only by system reset. - */ -#define __HAL_SYSCFG_BREAK_LOCKUP_LOCK() SET_BIT(SYSCFG->CFGR2, SYSCFG_CFGR2_CLL) - -/** @brief SYSCFG Break PVD lock. - * Enable and lock the PVD connection to Timer1/8/15/16/17 Break input, as well as the PVDE and PLS[2:0] in the PWR_CR2 register. - * @note The selected configuration is locked and can be unlocked only by system reset. - */ -#define __HAL_SYSCFG_BREAK_PVD_LOCK() SET_BIT(SYSCFG->CFGR2, SYSCFG_CFGR2_PVDL) - -/** @brief SYSCFG Break SRAM2 parity lock. - * Enable and lock the SRAM2 parity error signal connection to TIM1/8/15/16/17 Break input. - * @note The selected configuration is locked and can be unlocked by system reset. - */ -#define __HAL_SYSCFG_BREAK_SRAM2PARITY_LOCK() SET_BIT(SYSCFG->CFGR2, SYSCFG_CFGR2_SPL) - -/** @brief Check SYSCFG flag is set or not. - * @param __FLAG__ specifies the flag to check. - * This parameter can be one of the following values: - * @arg @ref SYSCFG_FLAG_SRAM2_PE SRAM2 Parity Error Flag - * @arg @ref SYSCFG_FLAG_SRAM2_BUSY SRAM2 Erase Ongoing - * @retval The new state of __FLAG__ (TRUE or FALSE). - */ -#define __HAL_SYSCFG_GET_FLAG(__FLAG__) ((((((__FLAG__) == SYSCFG_SCSR_SRAM2BSY)? SYSCFG->SCSR : SYSCFG->CFGR2) & (__FLAG__))!= 0U) ? 1U : 0U) - -/** @brief Set the SPF bit to clear the SRAM Parity Error Flag. - */ -#define __HAL_SYSCFG_CLEAR_FLAG() SET_BIT(SYSCFG->CFGR2, SYSCFG_CFGR2_SPF) - -/** @brief Fast-mode Plus driving capability enable/disable macros - * @param __FASTMODEPLUS__ This parameter can be a value of : - * @arg @ref SYSCFG_FASTMODEPLUS_PB6 Fast-mode Plus driving capability activation on PB6 - * @arg @ref SYSCFG_FASTMODEPLUS_PB7 Fast-mode Plus driving capability activation on PB7 - * @arg @ref SYSCFG_FASTMODEPLUS_PB8 Fast-mode Plus driving capability activation on PB8 - * @arg @ref SYSCFG_FASTMODEPLUS_PB9 Fast-mode Plus driving capability activation on PB9 - */ -#define __HAL_SYSCFG_FASTMODEPLUS_ENABLE(__FASTMODEPLUS__) do {assert_param(IS_SYSCFG_FASTMODEPLUS((__FASTMODEPLUS__)));\ - SET_BIT(SYSCFG->CFGR1, (__FASTMODEPLUS__));\ - }while(0) - -#define __HAL_SYSCFG_FASTMODEPLUS_DISABLE(__FASTMODEPLUS__) do {assert_param(IS_SYSCFG_FASTMODEPLUS((__FASTMODEPLUS__)));\ - CLEAR_BIT(SYSCFG->CFGR1, (__FASTMODEPLUS__));\ - }while(0) - -/** - * @} - */ - -/** - * @} - */ - -/* Private macros ------------------------------------------------------------*/ -/** @defgroup HAL_Private_Macros HAL Private Macros - * @{ - */ - -/** @defgroup SYSCFG_Private_Macros SYSCFG Private Macros - * @{ - */ - -#define IS_SYSCFG_FPU_INTERRUPT(__INTERRUPT__) ((((__INTERRUPT__) & SYSCFG_IT_FPU_IOC) == SYSCFG_IT_FPU_IOC) || \ - (((__INTERRUPT__) & SYSCFG_IT_FPU_DZC) == SYSCFG_IT_FPU_DZC) || \ - (((__INTERRUPT__) & SYSCFG_IT_FPU_UFC) == SYSCFG_IT_FPU_UFC) || \ - (((__INTERRUPT__) & SYSCFG_IT_FPU_OFC) == SYSCFG_IT_FPU_OFC) || \ - (((__INTERRUPT__) & SYSCFG_IT_FPU_IDC) == SYSCFG_IT_FPU_IDC) || \ - (((__INTERRUPT__) & SYSCFG_IT_FPU_IXC) == SYSCFG_IT_FPU_IXC)) - -#define IS_SYSCFG_BREAK_CONFIG(__CONFIG__) (((__CONFIG__) == SYSCFG_BREAK_ECC) || \ - ((__CONFIG__) == SYSCFG_BREAK_PVD) || \ - ((__CONFIG__) == SYSCFG_BREAK_SRAM2_PARITY) || \ - ((__CONFIG__) == SYSCFG_BREAK_LOCKUP)) - -#define IS_SYSCFG_SRAM2WRP_PAGE(__PAGE__) (((__PAGE__) > 0U) && ((__PAGE__) <= 0xFFFFFFFFUL)) - -#if defined(VREFBUF) -#define IS_SYSCFG_VREFBUF_VOLTAGE_SCALE(__SCALE__) (((__SCALE__) == SYSCFG_VREFBUF_VOLTAGE_SCALE0) || \ - ((__SCALE__) == SYSCFG_VREFBUF_VOLTAGE_SCALE1)) - -#define IS_SYSCFG_VREFBUF_HIGH_IMPEDANCE(__VALUE__) (((__VALUE__) == SYSCFG_VREFBUF_HIGH_IMPEDANCE_DISABLE) || \ - ((__VALUE__) == SYSCFG_VREFBUF_HIGH_IMPEDANCE_ENABLE)) - -#define IS_SYSCFG_VREFBUF_TRIMMING(__VALUE__) (((__VALUE__) > 0U) && ((__VALUE__) <= VREFBUF_CCR_TRIM)) -#endif /* VREFBUF */ - -#if defined(SYSCFG_FASTMODEPLUS_PB8) && defined(SYSCFG_FASTMODEPLUS_PB9) -#define IS_SYSCFG_FASTMODEPLUS(__PIN__) ((((__PIN__) & SYSCFG_FASTMODEPLUS_PB6) == SYSCFG_FASTMODEPLUS_PB6) || \ - (((__PIN__) & SYSCFG_FASTMODEPLUS_PB7) == SYSCFG_FASTMODEPLUS_PB7) || \ - (((__PIN__) & SYSCFG_FASTMODEPLUS_PB8) == SYSCFG_FASTMODEPLUS_PB8) || \ - (((__PIN__) & SYSCFG_FASTMODEPLUS_PB9) == SYSCFG_FASTMODEPLUS_PB9)) -#elif defined(SYSCFG_FASTMODEPLUS_PB8) -#define IS_SYSCFG_FASTMODEPLUS(__PIN__) ((((__PIN__) & SYSCFG_FASTMODEPLUS_PB6) == SYSCFG_FASTMODEPLUS_PB6) || \ - (((__PIN__) & SYSCFG_FASTMODEPLUS_PB7) == SYSCFG_FASTMODEPLUS_PB7) || \ - (((__PIN__) & SYSCFG_FASTMODEPLUS_PB8) == SYSCFG_FASTMODEPLUS_PB8)) -#elif defined(SYSCFG_FASTMODEPLUS_PB9) -#define IS_SYSCFG_FASTMODEPLUS(__PIN__) ((((__PIN__) & SYSCFG_FASTMODEPLUS_PB6) == SYSCFG_FASTMODEPLUS_PB6) || \ - (((__PIN__) & SYSCFG_FASTMODEPLUS_PB7) == SYSCFG_FASTMODEPLUS_PB7) || \ - (((__PIN__) & SYSCFG_FASTMODEPLUS_PB9) == SYSCFG_FASTMODEPLUS_PB9)) -#else -#define IS_SYSCFG_FASTMODEPLUS(__PIN__) ((((__PIN__) & SYSCFG_FASTMODEPLUS_PB6) == SYSCFG_FASTMODEPLUS_PB6) || \ - (((__PIN__) & SYSCFG_FASTMODEPLUS_PB7) == SYSCFG_FASTMODEPLUS_PB7)) -#endif -/** - * @} - */ - -/** - * @} - */ - -/* Exported variables --------------------------------------------------------*/ - -/** @addtogroup HAL_Exported_Variables - * @{ - */ -extern __IO uint32_t uwTick; -extern uint32_t uwTickPrio; -extern HAL_TickFreqTypeDef uwTickFreq; -/** - * @} - */ - -/* Exported functions --------------------------------------------------------*/ - -/** @addtogroup HAL_Exported_Functions - * @{ - */ - -/** @addtogroup HAL_Exported_Functions_Group1 - * @{ - */ - -/* Initialization and de-initialization functions ******************************/ -HAL_StatusTypeDef HAL_Init(void); -HAL_StatusTypeDef HAL_DeInit(void); -void HAL_MspInit(void); -void HAL_MspDeInit(void); -HAL_StatusTypeDef HAL_InitTick (uint32_t TickPriority); - -/** - * @} - */ - -/** @addtogroup HAL_Exported_Functions_Group2 - * @{ - */ - -/* Peripheral Control functions ************************************************/ -void HAL_IncTick(void); -void HAL_Delay(uint32_t Delay); -uint32_t HAL_GetTick(void); -uint32_t HAL_GetTickPrio(void); -HAL_StatusTypeDef HAL_SetTickFreq(HAL_TickFreqTypeDef Freq); -HAL_TickFreqTypeDef HAL_GetTickFreq(void); -void HAL_SuspendTick(void); -void HAL_ResumeTick(void); -uint32_t HAL_GetHalVersion(void); -uint32_t HAL_GetREVID(void); -uint32_t HAL_GetDEVID(void); -uint32_t HAL_GetUIDw0(void); -uint32_t HAL_GetUIDw1(void); -uint32_t HAL_GetUIDw2(void); - -/** - * @} - */ - -/** @addtogroup HAL_Exported_Functions_Group3 - * @{ - */ - -/* DBGMCU Peripheral Control functions *****************************************/ -void HAL_DBGMCU_EnableDBGSleepMode(void); -void HAL_DBGMCU_DisableDBGSleepMode(void); -void HAL_DBGMCU_EnableDBGStopMode(void); -void HAL_DBGMCU_DisableDBGStopMode(void); -void HAL_DBGMCU_EnableDBGStandbyMode(void); -void HAL_DBGMCU_DisableDBGStandbyMode(void); - -/** - * @} - */ - -/** @addtogroup HAL_Exported_Functions_Group4 - * @{ - */ - -/* SYSCFG Control functions ****************************************************/ -void HAL_SYSCFG_SRAM2Erase(void); -void HAL_SYSCFG_EnableMemorySwappingBank(void); -void HAL_SYSCFG_DisableMemorySwappingBank(void); - -#if defined(VREFBUF) -void HAL_SYSCFG_VREFBUF_VoltageScalingConfig(uint32_t VoltageScaling); -void HAL_SYSCFG_VREFBUF_HighImpedanceConfig(uint32_t Mode); -void HAL_SYSCFG_VREFBUF_TrimmingConfig(uint32_t TrimmingValue); -HAL_StatusTypeDef HAL_SYSCFG_EnableVREFBUF(void); -void HAL_SYSCFG_DisableVREFBUF(void); -#endif /* VREFBUF */ - -void HAL_SYSCFG_EnableIOAnalogSwitchBooster(void); -void HAL_SYSCFG_DisableIOAnalogSwitchBooster(void); - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /* STM32L4xx_HAL_H */ +/** + ****************************************************************************** + * @file stm32l4xx_hal.h + * @author MCD Application Team + * @brief This file contains all the functions prototypes for the HAL + * module driver. + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32L4xx_HAL_H +#define STM32L4xx_HAL_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l4xx_hal_conf.h" + +/** @addtogroup STM32L4xx_HAL_Driver + * @{ + */ + +/** @addtogroup HAL + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup HAL_Exported_Types HAL Exported Types + * @{ + */ + +/** @defgroup HAL_TICK_FREQ Tick Frequency + * @{ + */ +typedef enum +{ + HAL_TICK_FREQ_10HZ = 100U, + HAL_TICK_FREQ_100HZ = 10U, + HAL_TICK_FREQ_1KHZ = 1U, + HAL_TICK_FREQ_DEFAULT = HAL_TICK_FREQ_1KHZ +} HAL_TickFreqTypeDef; +/** + * @} + */ + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup HAL_Exported_Constants HAL Exported Constants + * @{ + */ + +/** @defgroup SYSCFG_Exported_Constants SYSCFG Exported Constants + * @{ + */ + +/** @defgroup SYSCFG_BootMode Boot Mode + * @{ + */ +#define SYSCFG_BOOT_MAINFLASH 0U +#define SYSCFG_BOOT_SYSTEMFLASH SYSCFG_MEMRMP_MEM_MODE_0 + +#if defined (STM32L471xx) || defined (STM32L475xx) || defined (STM32L476xx) || defined (STM32L485xx) || defined (STM32L486xx) || \ + defined (STM32L496xx) || defined (STM32L4A6xx) || \ + defined (STM32L4P5xx) || defined (STM32L4Q5xx) || \ + defined (STM32L4R5xx) || defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined (STM32L4S9xx) +#define SYSCFG_BOOT_FMC SYSCFG_MEMRMP_MEM_MODE_1 +#endif /* STM32L471xx || STM32L475xx || STM32L476xx || STM32L485xx || STM32L486xx || */ + /* STM32L496xx || STM32L4A6xx || */ + /* STM32L4P5xx || STM32L4Q5xx || */ + /* STM32L4R5xx || STM32L4R7xx || STM32L4R9xx || STM32L4S5xx || STM32L4S7xx || STM32L4S9xx */ + +#define SYSCFG_BOOT_SRAM (SYSCFG_MEMRMP_MEM_MODE_1 | SYSCFG_MEMRMP_MEM_MODE_0) + +#if defined (STM32L4P5xx) || defined (STM32L4Q5xx) || defined (STM32L4R5xx) || defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined (STM32L4S9xx) +#define SYSCFG_BOOT_OCTOPSPI1 (SYSCFG_MEMRMP_MEM_MODE_2) +#define SYSCFG_BOOT_OCTOPSPI2 (SYSCFG_MEMRMP_MEM_MODE_2 | SYSCFG_MEMRMP_MEM_MODE_0) +#else +#define SYSCFG_BOOT_QUADSPI (SYSCFG_MEMRMP_MEM_MODE_2 | SYSCFG_MEMRMP_MEM_MODE_1) +#endif /* STM32L4P5xx || STM32L4Q5xx || STM32L4R5xx || STM32L4R7xx || STM32L4R9xx || STM32L4S5xx || STM32L4S7xx || STM32L4S9xx */ + +/** + * @} + */ + +/** @defgroup SYSCFG_FPU_Interrupts FPU Interrupts + * @{ + */ +#define SYSCFG_IT_FPU_IOC SYSCFG_CFGR1_FPU_IE_0 /*!< Floating Point Unit Invalid operation Interrupt */ +#define SYSCFG_IT_FPU_DZC SYSCFG_CFGR1_FPU_IE_1 /*!< Floating Point Unit Divide-by-zero Interrupt */ +#define SYSCFG_IT_FPU_UFC SYSCFG_CFGR1_FPU_IE_2 /*!< Floating Point Unit Underflow Interrupt */ +#define SYSCFG_IT_FPU_OFC SYSCFG_CFGR1_FPU_IE_3 /*!< Floating Point Unit Overflow Interrupt */ +#define SYSCFG_IT_FPU_IDC SYSCFG_CFGR1_FPU_IE_4 /*!< Floating Point Unit Input denormal Interrupt */ +#define SYSCFG_IT_FPU_IXC SYSCFG_CFGR1_FPU_IE_5 /*!< Floating Point Unit Inexact Interrupt */ + +/** + * @} + */ + +/** @defgroup SYSCFG_SRAM2WRP SRAM2 Page Write protection (0 to 31) + * @{ + */ +#define SYSCFG_SRAM2WRP_PAGE0 SYSCFG_SWPR_PAGE0 /*!< SRAM2 Write protection page 0 */ +#define SYSCFG_SRAM2WRP_PAGE1 SYSCFG_SWPR_PAGE1 /*!< SRAM2 Write protection page 1 */ +#define SYSCFG_SRAM2WRP_PAGE2 SYSCFG_SWPR_PAGE2 /*!< SRAM2 Write protection page 2 */ +#define SYSCFG_SRAM2WRP_PAGE3 SYSCFG_SWPR_PAGE3 /*!< SRAM2 Write protection page 3 */ +#define SYSCFG_SRAM2WRP_PAGE4 SYSCFG_SWPR_PAGE4 /*!< SRAM2 Write protection page 4 */ +#define SYSCFG_SRAM2WRP_PAGE5 SYSCFG_SWPR_PAGE5 /*!< SRAM2 Write protection page 5 */ +#define SYSCFG_SRAM2WRP_PAGE6 SYSCFG_SWPR_PAGE6 /*!< SRAM2 Write protection page 6 */ +#define SYSCFG_SRAM2WRP_PAGE7 SYSCFG_SWPR_PAGE7 /*!< SRAM2 Write protection page 7 */ +#define SYSCFG_SRAM2WRP_PAGE8 SYSCFG_SWPR_PAGE8 /*!< SRAM2 Write protection page 8 */ +#define SYSCFG_SRAM2WRP_PAGE9 SYSCFG_SWPR_PAGE9 /*!< SRAM2 Write protection page 9 */ +#define SYSCFG_SRAM2WRP_PAGE10 SYSCFG_SWPR_PAGE10 /*!< SRAM2 Write protection page 10 */ +#define SYSCFG_SRAM2WRP_PAGE11 SYSCFG_SWPR_PAGE11 /*!< SRAM2 Write protection page 11 */ +#define SYSCFG_SRAM2WRP_PAGE12 SYSCFG_SWPR_PAGE12 /*!< SRAM2 Write protection page 12 */ +#define SYSCFG_SRAM2WRP_PAGE13 SYSCFG_SWPR_PAGE13 /*!< SRAM2 Write protection page 13 */ +#define SYSCFG_SRAM2WRP_PAGE14 SYSCFG_SWPR_PAGE14 /*!< SRAM2 Write protection page 14 */ +#define SYSCFG_SRAM2WRP_PAGE15 SYSCFG_SWPR_PAGE15 /*!< SRAM2 Write protection page 15 */ +#if defined(SYSCFG_SWPR_PAGE31) +#define SYSCFG_SRAM2WRP_PAGE16 SYSCFG_SWPR_PAGE16 /*!< SRAM2 Write protection page 16 */ +#define SYSCFG_SRAM2WRP_PAGE17 SYSCFG_SWPR_PAGE17 /*!< SRAM2 Write protection page 17 */ +#define SYSCFG_SRAM2WRP_PAGE18 SYSCFG_SWPR_PAGE18 /*!< SRAM2 Write protection page 18 */ +#define SYSCFG_SRAM2WRP_PAGE19 SYSCFG_SWPR_PAGE19 /*!< SRAM2 Write protection page 19 */ +#define SYSCFG_SRAM2WRP_PAGE20 SYSCFG_SWPR_PAGE20 /*!< SRAM2 Write protection page 20 */ +#define SYSCFG_SRAM2WRP_PAGE21 SYSCFG_SWPR_PAGE21 /*!< SRAM2 Write protection page 21 */ +#define SYSCFG_SRAM2WRP_PAGE22 SYSCFG_SWPR_PAGE22 /*!< SRAM2 Write protection page 22 */ +#define SYSCFG_SRAM2WRP_PAGE23 SYSCFG_SWPR_PAGE23 /*!< SRAM2 Write protection page 23 */ +#define SYSCFG_SRAM2WRP_PAGE24 SYSCFG_SWPR_PAGE24 /*!< SRAM2 Write protection page 24 */ +#define SYSCFG_SRAM2WRP_PAGE25 SYSCFG_SWPR_PAGE25 /*!< SRAM2 Write protection page 25 */ +#define SYSCFG_SRAM2WRP_PAGE26 SYSCFG_SWPR_PAGE26 /*!< SRAM2 Write protection page 26 */ +#define SYSCFG_SRAM2WRP_PAGE27 SYSCFG_SWPR_PAGE27 /*!< SRAM2 Write protection page 27 */ +#define SYSCFG_SRAM2WRP_PAGE28 SYSCFG_SWPR_PAGE28 /*!< SRAM2 Write protection page 28 */ +#define SYSCFG_SRAM2WRP_PAGE29 SYSCFG_SWPR_PAGE29 /*!< SRAM2 Write protection page 29 */ +#define SYSCFG_SRAM2WRP_PAGE30 SYSCFG_SWPR_PAGE30 /*!< SRAM2 Write protection page 30 */ +#define SYSCFG_SRAM2WRP_PAGE31 SYSCFG_SWPR_PAGE31 /*!< SRAM2 Write protection page 31 */ +#endif /* SYSCFG_SWPR_PAGE31 */ + +/** + * @} + */ + +#if defined(SYSCFG_SWPR2_PAGE63) +/** @defgroup SYSCFG_SRAM2WRP_32_63 SRAM2 Page Write protection (32 to 63) + * @{ + */ +#define SYSCFG_SRAM2WRP_PAGE32 SYSCFG_SWPR2_PAGE32 /*!< SRAM2 Write protection page 32 */ +#define SYSCFG_SRAM2WRP_PAGE33 SYSCFG_SWPR2_PAGE33 /*!< SRAM2 Write protection page 33 */ +#define SYSCFG_SRAM2WRP_PAGE34 SYSCFG_SWPR2_PAGE34 /*!< SRAM2 Write protection page 34 */ +#define SYSCFG_SRAM2WRP_PAGE35 SYSCFG_SWPR2_PAGE35 /*!< SRAM2 Write protection page 35 */ +#define SYSCFG_SRAM2WRP_PAGE36 SYSCFG_SWPR2_PAGE36 /*!< SRAM2 Write protection page 36 */ +#define SYSCFG_SRAM2WRP_PAGE37 SYSCFG_SWPR2_PAGE37 /*!< SRAM2 Write protection page 37 */ +#define SYSCFG_SRAM2WRP_PAGE38 SYSCFG_SWPR2_PAGE38 /*!< SRAM2 Write protection page 38 */ +#define SYSCFG_SRAM2WRP_PAGE39 SYSCFG_SWPR2_PAGE39 /*!< SRAM2 Write protection page 39 */ +#define SYSCFG_SRAM2WRP_PAGE40 SYSCFG_SWPR2_PAGE40 /*!< SRAM2 Write protection page 40 */ +#define SYSCFG_SRAM2WRP_PAGE41 SYSCFG_SWPR2_PAGE41 /*!< SRAM2 Write protection page 41 */ +#define SYSCFG_SRAM2WRP_PAGE42 SYSCFG_SWPR2_PAGE42 /*!< SRAM2 Write protection page 42 */ +#define SYSCFG_SRAM2WRP_PAGE43 SYSCFG_SWPR2_PAGE43 /*!< SRAM2 Write protection page 43 */ +#define SYSCFG_SRAM2WRP_PAGE44 SYSCFG_SWPR2_PAGE44 /*!< SRAM2 Write protection page 44 */ +#define SYSCFG_SRAM2WRP_PAGE45 SYSCFG_SWPR2_PAGE45 /*!< SRAM2 Write protection page 45 */ +#define SYSCFG_SRAM2WRP_PAGE46 SYSCFG_SWPR2_PAGE46 /*!< SRAM2 Write protection page 46 */ +#define SYSCFG_SRAM2WRP_PAGE47 SYSCFG_SWPR2_PAGE47 /*!< SRAM2 Write protection page 47 */ +#define SYSCFG_SRAM2WRP_PAGE48 SYSCFG_SWPR2_PAGE48 /*!< SRAM2 Write protection page 48 */ +#define SYSCFG_SRAM2WRP_PAGE49 SYSCFG_SWPR2_PAGE49 /*!< SRAM2 Write protection page 49 */ +#define SYSCFG_SRAM2WRP_PAGE50 SYSCFG_SWPR2_PAGE50 /*!< SRAM2 Write protection page 50 */ +#define SYSCFG_SRAM2WRP_PAGE51 SYSCFG_SWPR2_PAGE51 /*!< SRAM2 Write protection page 51 */ +#define SYSCFG_SRAM2WRP_PAGE52 SYSCFG_SWPR2_PAGE52 /*!< SRAM2 Write protection page 52 */ +#define SYSCFG_SRAM2WRP_PAGE53 SYSCFG_SWPR2_PAGE53 /*!< SRAM2 Write protection page 53 */ +#define SYSCFG_SRAM2WRP_PAGE54 SYSCFG_SWPR2_PAGE54 /*!< SRAM2 Write protection page 54 */ +#define SYSCFG_SRAM2WRP_PAGE55 SYSCFG_SWPR2_PAGE55 /*!< SRAM2 Write protection page 55 */ +#define SYSCFG_SRAM2WRP_PAGE56 SYSCFG_SWPR2_PAGE56 /*!< SRAM2 Write protection page 56 */ +#define SYSCFG_SRAM2WRP_PAGE57 SYSCFG_SWPR2_PAGE57 /*!< SRAM2 Write protection page 57 */ +#define SYSCFG_SRAM2WRP_PAGE58 SYSCFG_SWPR2_PAGE58 /*!< SRAM2 Write protection page 58 */ +#define SYSCFG_SRAM2WRP_PAGE59 SYSCFG_SWPR2_PAGE59 /*!< SRAM2 Write protection page 59 */ +#define SYSCFG_SRAM2WRP_PAGE60 SYSCFG_SWPR2_PAGE60 /*!< SRAM2 Write protection page 60 */ +#define SYSCFG_SRAM2WRP_PAGE61 SYSCFG_SWPR2_PAGE61 /*!< SRAM2 Write protection page 61 */ +#define SYSCFG_SRAM2WRP_PAGE62 SYSCFG_SWPR2_PAGE62 /*!< SRAM2 Write protection page 62 */ +#define SYSCFG_SRAM2WRP_PAGE63 SYSCFG_SWPR2_PAGE63 /*!< SRAM2 Write protection page 63 */ + +/** + * @} + */ +#endif /* SYSCFG_SWPR2_PAGE63 */ + +#if defined(VREFBUF) +/** @defgroup SYSCFG_VREFBUF_VoltageScale VREFBUF Voltage Scale + * @{ + */ +#define SYSCFG_VREFBUF_VOLTAGE_SCALE0 0U /*!< Voltage reference scale 0 (VREF_OUT1) */ +#define SYSCFG_VREFBUF_VOLTAGE_SCALE1 VREFBUF_CSR_VRS /*!< Voltage reference scale 1 (VREF_OUT2) */ + +/** + * @} + */ + +/** @defgroup SYSCFG_VREFBUF_HighImpedance VREFBUF High Impedance + * @{ + */ +#define SYSCFG_VREFBUF_HIGH_IMPEDANCE_DISABLE 0U /*!< VREF_plus pin is internally connected to Voltage reference buffer output */ +#define SYSCFG_VREFBUF_HIGH_IMPEDANCE_ENABLE VREFBUF_CSR_HIZ /*!< VREF_plus pin is high impedance */ + +/** + * @} + */ +#endif /* VREFBUF */ + +/** @defgroup SYSCFG_flags_definition Flags + * @{ + */ + +#define SYSCFG_FLAG_SRAM2_PE SYSCFG_CFGR2_SPF /*!< SRAM2 parity error */ +#define SYSCFG_FLAG_SRAM2_BUSY SYSCFG_SCSR_SRAM2BSY /*!< SRAM2 busy by erase operation */ + +/** + * @} + */ + +/** @defgroup SYSCFG_FastModePlus_GPIO Fast-mode Plus on GPIO + * @{ + */ + +/** @brief Fast-mode Plus driving capability on a specific GPIO + */ +#define SYSCFG_FASTMODEPLUS_PB6 SYSCFG_CFGR1_I2C_PB6_FMP /*!< Enable Fast-mode Plus on PB6 */ +#define SYSCFG_FASTMODEPLUS_PB7 SYSCFG_CFGR1_I2C_PB7_FMP /*!< Enable Fast-mode Plus on PB7 */ +#if defined(SYSCFG_CFGR1_I2C_PB8_FMP) +#define SYSCFG_FASTMODEPLUS_PB8 SYSCFG_CFGR1_I2C_PB8_FMP /*!< Enable Fast-mode Plus on PB8 */ +#endif /* SYSCFG_CFGR1_I2C_PB8_FMP */ +#if defined(SYSCFG_CFGR1_I2C_PB9_FMP) +#define SYSCFG_FASTMODEPLUS_PB9 SYSCFG_CFGR1_I2C_PB9_FMP /*!< Enable Fast-mode Plus on PB9 */ +#endif /* SYSCFG_CFGR1_I2C_PB9_FMP */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ +/** @defgroup HAL_Exported_Macros HAL Exported Macros + * @{ + */ + +/** @defgroup DBGMCU_Exported_Macros DBGMCU Exported Macros + * @{ + */ + +/** @brief Freeze/Unfreeze Peripherals in Debug mode + */ +#if defined(DBGMCU_APB1FZR1_DBG_TIM2_STOP) +#define __HAL_DBGMCU_FREEZE_TIM2() SET_BIT(DBGMCU->APB1FZR1, DBGMCU_APB1FZR1_DBG_TIM2_STOP) +#define __HAL_DBGMCU_UNFREEZE_TIM2() CLEAR_BIT(DBGMCU->APB1FZR1, DBGMCU_APB1FZR1_DBG_TIM2_STOP) +#endif + +#if defined(DBGMCU_APB1FZR1_DBG_TIM3_STOP) +#define __HAL_DBGMCU_FREEZE_TIM3() SET_BIT(DBGMCU->APB1FZR1, DBGMCU_APB1FZR1_DBG_TIM3_STOP) +#define __HAL_DBGMCU_UNFREEZE_TIM3() CLEAR_BIT(DBGMCU->APB1FZR1, DBGMCU_APB1FZR1_DBG_TIM3_STOP) +#endif + +#if defined(DBGMCU_APB1FZR1_DBG_TIM4_STOP) +#define __HAL_DBGMCU_FREEZE_TIM4() SET_BIT(DBGMCU->APB1FZR1, DBGMCU_APB1FZR1_DBG_TIM4_STOP) +#define __HAL_DBGMCU_UNFREEZE_TIM4() CLEAR_BIT(DBGMCU->APB1FZR1, DBGMCU_APB1FZR1_DBG_TIM4_STOP) +#endif + +#if defined(DBGMCU_APB1FZR1_DBG_TIM5_STOP) +#define __HAL_DBGMCU_FREEZE_TIM5() SET_BIT(DBGMCU->APB1FZR1, DBGMCU_APB1FZR1_DBG_TIM5_STOP) +#define __HAL_DBGMCU_UNFREEZE_TIM5() CLEAR_BIT(DBGMCU->APB1FZR1, DBGMCU_APB1FZR1_DBG_TIM5_STOP) +#endif + +#if defined(DBGMCU_APB1FZR1_DBG_TIM6_STOP) +#define __HAL_DBGMCU_FREEZE_TIM6() SET_BIT(DBGMCU->APB1FZR1, DBGMCU_APB1FZR1_DBG_TIM6_STOP) +#define __HAL_DBGMCU_UNFREEZE_TIM6() CLEAR_BIT(DBGMCU->APB1FZR1, DBGMCU_APB1FZR1_DBG_TIM6_STOP) +#endif + +#if defined(DBGMCU_APB1FZR1_DBG_TIM7_STOP) +#define __HAL_DBGMCU_FREEZE_TIM7() SET_BIT(DBGMCU->APB1FZR1, DBGMCU_APB1FZR1_DBG_TIM7_STOP) +#define __HAL_DBGMCU_UNFREEZE_TIM7() CLEAR_BIT(DBGMCU->APB1FZR1, DBGMCU_APB1FZR1_DBG_TIM7_STOP) +#endif + +#if defined(DBGMCU_APB1FZR1_DBG_RTC_STOP) +#define __HAL_DBGMCU_FREEZE_RTC() SET_BIT(DBGMCU->APB1FZR1, DBGMCU_APB1FZR1_DBG_RTC_STOP) +#define __HAL_DBGMCU_UNFREEZE_RTC() CLEAR_BIT(DBGMCU->APB1FZR1, DBGMCU_APB1FZR1_DBG_RTC_STOP) +#endif + +#if defined(DBGMCU_APB1FZR1_DBG_WWDG_STOP) +#define __HAL_DBGMCU_FREEZE_WWDG() SET_BIT(DBGMCU->APB1FZR1, DBGMCU_APB1FZR1_DBG_WWDG_STOP) +#define __HAL_DBGMCU_UNFREEZE_WWDG() CLEAR_BIT(DBGMCU->APB1FZR1, DBGMCU_APB1FZR1_DBG_WWDG_STOP) +#endif + +#if defined(DBGMCU_APB1FZR1_DBG_IWDG_STOP) +#define __HAL_DBGMCU_FREEZE_IWDG() SET_BIT(DBGMCU->APB1FZR1, DBGMCU_APB1FZR1_DBG_IWDG_STOP) +#define __HAL_DBGMCU_UNFREEZE_IWDG() CLEAR_BIT(DBGMCU->APB1FZR1, DBGMCU_APB1FZR1_DBG_IWDG_STOP) +#endif + +#if defined(DBGMCU_APB1FZR1_DBG_I2C1_STOP) +#define __HAL_DBGMCU_FREEZE_I2C1_TIMEOUT() SET_BIT(DBGMCU->APB1FZR1, DBGMCU_APB1FZR1_DBG_I2C1_STOP) +#define __HAL_DBGMCU_UNFREEZE_I2C1_TIMEOUT() CLEAR_BIT(DBGMCU->APB1FZR1, DBGMCU_APB1FZR1_DBG_I2C1_STOP) +#endif + +#if defined(DBGMCU_APB1FZR1_DBG_I2C2_STOP) +#define __HAL_DBGMCU_FREEZE_I2C2_TIMEOUT() SET_BIT(DBGMCU->APB1FZR1, DBGMCU_APB1FZR1_DBG_I2C2_STOP) +#define __HAL_DBGMCU_UNFREEZE_I2C2_TIMEOUT() CLEAR_BIT(DBGMCU->APB1FZR1, DBGMCU_APB1FZR1_DBG_I2C2_STOP) +#endif + +#if defined(DBGMCU_APB1FZR1_DBG_I2C3_STOP) +#define __HAL_DBGMCU_FREEZE_I2C3_TIMEOUT() SET_BIT(DBGMCU->APB1FZR1, DBGMCU_APB1FZR1_DBG_I2C3_STOP) +#define __HAL_DBGMCU_UNFREEZE_I2C3_TIMEOUT() CLEAR_BIT(DBGMCU->APB1FZR1, DBGMCU_APB1FZR1_DBG_I2C3_STOP) +#endif + +#if defined(DBGMCU_APB1FZR2_DBG_I2C4_STOP) +#define __HAL_DBGMCU_FREEZE_I2C4_TIMEOUT() SET_BIT(DBGMCU->APB1FZR2, DBGMCU_APB1FZR2_DBG_I2C4_STOP) +#define __HAL_DBGMCU_UNFREEZE_I2C4_TIMEOUT() CLEAR_BIT(DBGMCU->APB1FZR2, DBGMCU_APB1FZR2_DBG_I2C4_STOP) +#endif + +#if defined(DBGMCU_APB1FZR1_DBG_CAN_STOP) +#define __HAL_DBGMCU_FREEZE_CAN1() SET_BIT(DBGMCU->APB1FZR1, DBGMCU_APB1FZR1_DBG_CAN_STOP) +#define __HAL_DBGMCU_UNFREEZE_CAN1() CLEAR_BIT(DBGMCU->APB1FZR1, DBGMCU_APB1FZR1_DBG_CAN_STOP) +#endif + +#if defined(DBGMCU_APB1FZR1_DBG_CAN2_STOP) +#define __HAL_DBGMCU_FREEZE_CAN2() SET_BIT(DBGMCU->APB1FZR1, DBGMCU_APB1FZR1_DBG_CAN2_STOP) +#define __HAL_DBGMCU_UNFREEZE_CAN2() CLEAR_BIT(DBGMCU->APB1FZR1, DBGMCU_APB1FZR1_DBG_CAN2_STOP) +#endif + +#if defined(DBGMCU_APB1FZR1_DBG_LPTIM1_STOP) +#define __HAL_DBGMCU_FREEZE_LPTIM1() SET_BIT(DBGMCU->APB1FZR1, DBGMCU_APB1FZR1_DBG_LPTIM1_STOP) +#define __HAL_DBGMCU_UNFREEZE_LPTIM1() CLEAR_BIT(DBGMCU->APB1FZR1, DBGMCU_APB1FZR1_DBG_LPTIM1_STOP) +#endif + +#if defined(DBGMCU_APB1FZR2_DBG_LPTIM2_STOP) +#define __HAL_DBGMCU_FREEZE_LPTIM2() SET_BIT(DBGMCU->APB1FZR2, DBGMCU_APB1FZR2_DBG_LPTIM2_STOP) +#define __HAL_DBGMCU_UNFREEZE_LPTIM2() CLEAR_BIT(DBGMCU->APB1FZR2, DBGMCU_APB1FZR2_DBG_LPTIM2_STOP) +#endif + +#if defined(DBGMCU_APB2FZ_DBG_TIM1_STOP) +#define __HAL_DBGMCU_FREEZE_TIM1() SET_BIT(DBGMCU->APB2FZ, DBGMCU_APB2FZ_DBG_TIM1_STOP) +#define __HAL_DBGMCU_UNFREEZE_TIM1() CLEAR_BIT(DBGMCU->APB2FZ, DBGMCU_APB2FZ_DBG_TIM1_STOP) +#endif + +#if defined(DBGMCU_APB2FZ_DBG_TIM8_STOP) +#define __HAL_DBGMCU_FREEZE_TIM8() SET_BIT(DBGMCU->APB2FZ, DBGMCU_APB2FZ_DBG_TIM8_STOP) +#define __HAL_DBGMCU_UNFREEZE_TIM8() CLEAR_BIT(DBGMCU->APB2FZ, DBGMCU_APB2FZ_DBG_TIM8_STOP) +#endif + +#if defined(DBGMCU_APB2FZ_DBG_TIM15_STOP) +#define __HAL_DBGMCU_FREEZE_TIM15() SET_BIT(DBGMCU->APB2FZ, DBGMCU_APB2FZ_DBG_TIM15_STOP) +#define __HAL_DBGMCU_UNFREEZE_TIM15() CLEAR_BIT(DBGMCU->APB2FZ, DBGMCU_APB2FZ_DBG_TIM15_STOP) +#endif + +#if defined(DBGMCU_APB2FZ_DBG_TIM16_STOP) +#define __HAL_DBGMCU_FREEZE_TIM16() SET_BIT(DBGMCU->APB2FZ, DBGMCU_APB2FZ_DBG_TIM16_STOP) +#define __HAL_DBGMCU_UNFREEZE_TIM16() CLEAR_BIT(DBGMCU->APB2FZ, DBGMCU_APB2FZ_DBG_TIM16_STOP) +#endif + +#if defined(DBGMCU_APB2FZ_DBG_TIM17_STOP) +#define __HAL_DBGMCU_FREEZE_TIM17() SET_BIT(DBGMCU->APB2FZ, DBGMCU_APB2FZ_DBG_TIM17_STOP) +#define __HAL_DBGMCU_UNFREEZE_TIM17() CLEAR_BIT(DBGMCU->APB2FZ, DBGMCU_APB2FZ_DBG_TIM17_STOP) +#endif + +/** + * @} + */ + +/** @defgroup SYSCFG_Exported_Macros SYSCFG Exported Macros + * @{ + */ + +/** @brief Main Flash memory mapped at 0x00000000. + */ +#define __HAL_SYSCFG_REMAPMEMORY_FLASH() CLEAR_BIT(SYSCFG->MEMRMP, SYSCFG_MEMRMP_MEM_MODE) + +/** @brief System Flash memory mapped at 0x00000000. + */ +#define __HAL_SYSCFG_REMAPMEMORY_SYSTEMFLASH() MODIFY_REG(SYSCFG->MEMRMP, SYSCFG_MEMRMP_MEM_MODE, SYSCFG_MEMRMP_MEM_MODE_0) + +/** @brief Embedded SRAM mapped at 0x00000000. + */ +#define __HAL_SYSCFG_REMAPMEMORY_SRAM() MODIFY_REG(SYSCFG->MEMRMP, SYSCFG_MEMRMP_MEM_MODE, (SYSCFG_MEMRMP_MEM_MODE_1|SYSCFG_MEMRMP_MEM_MODE_0)) + +#if defined (STM32L471xx) || defined (STM32L475xx) || defined (STM32L476xx) || defined (STM32L485xx) || defined (STM32L486xx) || \ + defined (STM32L496xx) || defined (STM32L4A6xx) || \ + defined (STM32L4P5xx) || defined (STM32L4Q5xx) || \ + defined (STM32L4R5xx) || defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined (STM32L4S9xx) + +/** @brief FMC Bank1 (NOR/PSRAM 1 and 2) mapped at 0x00000000. + */ +#define __HAL_SYSCFG_REMAPMEMORY_FMC() MODIFY_REG(SYSCFG->MEMRMP, SYSCFG_MEMRMP_MEM_MODE, SYSCFG_MEMRMP_MEM_MODE_1) + +#endif /* STM32L471xx || STM32L475xx || STM32L476xx || STM32L485xx || STM32L486xx || */ + /* STM32L496xx || STM32L4A6xx || */ + /* STM32L4P5xx || STM32L4Q5xx || */ + /* STM32L4R5xx || STM32L4R7xx || STM32L4R9xx || STM32L4S5xx || STM32L4S7xx || STM32L4S9xx */ + +#if defined (STM32L4P5xx) || defined (STM32L4Q5xx) || defined (STM32L4R5xx) || defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined (STM32L4S9xx) + +/** @brief OCTOSPI mapped at 0x00000000. + */ +#define __HAL_SYSCFG_REMAPMEMORY_OCTOSPI1() MODIFY_REG(SYSCFG->MEMRMP, SYSCFG_MEMRMP_MEM_MODE, (SYSCFG_MEMRMP_MEM_MODE_2)) +#define __HAL_SYSCFG_REMAPMEMORY_OCTOSPI2() MODIFY_REG(SYSCFG->MEMRMP, SYSCFG_MEMRMP_MEM_MODE, (SYSCFG_MEMRMP_MEM_MODE_2|SYSCFG_MEMRMP_MEM_MODE_0)) + +#else + +/** @brief QUADSPI mapped at 0x00000000. + */ +#define __HAL_SYSCFG_REMAPMEMORY_QUADSPI() MODIFY_REG(SYSCFG->MEMRMP, SYSCFG_MEMRMP_MEM_MODE, (SYSCFG_MEMRMP_MEM_MODE_2|SYSCFG_MEMRMP_MEM_MODE_1)) + +#endif /* STM32L4P5xx || STM32L4Q5xx || STM32L4R5xx || STM32L4R7xx || STM32L4R9xx || STM32L4S5xx || STM32L4S7xx || STM32L4S9xx */ + +/** + * @brief Return the boot mode as configured by user. + * @retval The boot mode as configured by user. The returned value can be one + * of the following values: + * @arg @ref SYSCFG_BOOT_MAINFLASH + * @arg @ref SYSCFG_BOOT_SYSTEMFLASH + @if STM32L486xx + * @arg @ref SYSCFG_BOOT_FMC + @endif + * @arg @ref SYSCFG_BOOT_SRAM + @if STM32L422xx + * @arg @ref SYSCFG_BOOT_QUADSPI + @endif + @if STM32L443xx + * @arg @ref SYSCFG_BOOT_QUADSPI + @endif + @if STM32L462xx + * @arg @ref SYSCFG_BOOT_QUADSPI + @endif + @if STM32L486xx + * @arg @ref SYSCFG_BOOT_QUADSPI + @endif + */ +#define __HAL_SYSCFG_GET_BOOT_MODE() READ_BIT(SYSCFG->MEMRMP, SYSCFG_MEMRMP_MEM_MODE) + +/** @brief SRAM2 page 0 to 31 write protection enable macro + * @param __SRAM2WRP__ This parameter can be a combination of values of @ref SYSCFG_SRAM2WRP + * @note Write protection can only be disabled by a system reset + */ +#define __HAL_SYSCFG_SRAM2_WRP_1_31_ENABLE(__SRAM2WRP__) do {assert_param(IS_SYSCFG_SRAM2WRP_PAGE((__SRAM2WRP__)));\ + SET_BIT(SYSCFG->SWPR, (__SRAM2WRP__));\ + }while(0) + +#if defined(SYSCFG_SWPR2_PAGE63) +/** @brief SRAM2 page 32 to 63 write protection enable macro + * @param __SRAM2WRP__ This parameter can be a combination of values of @ref SYSCFG_SRAM2WRP_32_63 + * @note Write protection can only be disabled by a system reset + */ +#define __HAL_SYSCFG_SRAM2_WRP_32_63_ENABLE(__SRAM2WRP__) do {assert_param(IS_SYSCFG_SRAM2WRP_PAGE((__SRAM2WRP__)));\ + SET_BIT(SYSCFG->SWPR2, (__SRAM2WRP__));\ + }while(0) +#endif /* SYSCFG_SWPR2_PAGE63 */ + +/** @brief SRAM2 page write protection unlock prior to erase + * @note Writing a wrong key reactivates the write protection + */ +#define __HAL_SYSCFG_SRAM2_WRP_UNLOCK() do {SYSCFG->SKR = 0xCA;\ + SYSCFG->SKR = 0x53;\ + }while(0) + +/** @brief SRAM2 erase + * @note __SYSCFG_GET_FLAG(SYSCFG_FLAG_SRAM2_BUSY) may be used to check end of erase + */ +#define __HAL_SYSCFG_SRAM2_ERASE() SET_BIT(SYSCFG->SCSR, SYSCFG_SCSR_SRAM2ER) + +/** @brief Floating Point Unit interrupt enable/disable macros + * @param __INTERRUPT__ This parameter can be a value of @ref SYSCFG_FPU_Interrupts + */ +#define __HAL_SYSCFG_FPU_INTERRUPT_ENABLE(__INTERRUPT__) do {assert_param(IS_SYSCFG_FPU_INTERRUPT((__INTERRUPT__)));\ + SET_BIT(SYSCFG->CFGR1, (__INTERRUPT__));\ + }while(0) + +#define __HAL_SYSCFG_FPU_INTERRUPT_DISABLE(__INTERRUPT__) do {assert_param(IS_SYSCFG_FPU_INTERRUPT((__INTERRUPT__)));\ + CLEAR_BIT(SYSCFG->CFGR1, (__INTERRUPT__));\ + }while(0) + +/** @brief SYSCFG Break ECC lock. + * Enable and lock the connection of Flash ECC error connection to TIM1/8/15/16/17 Break input. + * @note The selected configuration is locked and can be unlocked only by system reset. + */ +#define __HAL_SYSCFG_BREAK_ECC_LOCK() SET_BIT(SYSCFG->CFGR2, SYSCFG_CFGR2_ECCL) + +/** @brief SYSCFG Break Cortex-M4 Lockup lock. + * Enable and lock the connection of Cortex-M4 LOCKUP (Hardfault) output to TIM1/8/15/16/17 Break input. + * @note The selected configuration is locked and can be unlocked only by system reset. + */ +#define __HAL_SYSCFG_BREAK_LOCKUP_LOCK() SET_BIT(SYSCFG->CFGR2, SYSCFG_CFGR2_CLL) + +/** @brief SYSCFG Break PVD lock. + * Enable and lock the PVD connection to Timer1/8/15/16/17 Break input, as well as the PVDE and PLS[2:0] in the PWR_CR2 register. + * @note The selected configuration is locked and can be unlocked only by system reset. + */ +#define __HAL_SYSCFG_BREAK_PVD_LOCK() SET_BIT(SYSCFG->CFGR2, SYSCFG_CFGR2_PVDL) + +/** @brief SYSCFG Break SRAM2 parity lock. + * Enable and lock the SRAM2 parity error signal connection to TIM1/8/15/16/17 Break input. + * @note The selected configuration is locked and can be unlocked by system reset. + */ +#define __HAL_SYSCFG_BREAK_SRAM2PARITY_LOCK() SET_BIT(SYSCFG->CFGR2, SYSCFG_CFGR2_SPL) + +/** @brief Check SYSCFG flag is set or not. + * @param __FLAG__ specifies the flag to check. + * This parameter can be one of the following values: + * @arg @ref SYSCFG_FLAG_SRAM2_PE SRAM2 Parity Error Flag + * @arg @ref SYSCFG_FLAG_SRAM2_BUSY SRAM2 Erase Ongoing + * @retval The new state of __FLAG__ (TRUE or FALSE). + */ +#define __HAL_SYSCFG_GET_FLAG(__FLAG__) ((((((__FLAG__) == SYSCFG_SCSR_SRAM2BSY)? SYSCFG->SCSR : SYSCFG->CFGR2) & (__FLAG__))!= 0U) ? 1U : 0U) + +/** @brief Set the SPF bit to clear the SRAM Parity Error Flag. + */ +#define __HAL_SYSCFG_CLEAR_FLAG() SET_BIT(SYSCFG->CFGR2, SYSCFG_CFGR2_SPF) + +/** @brief Fast-mode Plus driving capability enable/disable macros + * @param __FASTMODEPLUS__ This parameter can be a value of : + * @arg @ref SYSCFG_FASTMODEPLUS_PB6 Fast-mode Plus driving capability activation on PB6 + * @arg @ref SYSCFG_FASTMODEPLUS_PB7 Fast-mode Plus driving capability activation on PB7 + * @arg @ref SYSCFG_FASTMODEPLUS_PB8 Fast-mode Plus driving capability activation on PB8 + * @arg @ref SYSCFG_FASTMODEPLUS_PB9 Fast-mode Plus driving capability activation on PB9 + */ +#define __HAL_SYSCFG_FASTMODEPLUS_ENABLE(__FASTMODEPLUS__) do {assert_param(IS_SYSCFG_FASTMODEPLUS((__FASTMODEPLUS__)));\ + SET_BIT(SYSCFG->CFGR1, (__FASTMODEPLUS__));\ + }while(0) + +#define __HAL_SYSCFG_FASTMODEPLUS_DISABLE(__FASTMODEPLUS__) do {assert_param(IS_SYSCFG_FASTMODEPLUS((__FASTMODEPLUS__)));\ + CLEAR_BIT(SYSCFG->CFGR1, (__FASTMODEPLUS__));\ + }while(0) + +/** + * @} + */ + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup HAL_Private_Macros HAL Private Macros + * @{ + */ + +/** @defgroup SYSCFG_Private_Macros SYSCFG Private Macros + * @{ + */ + +#define IS_SYSCFG_FPU_INTERRUPT(__INTERRUPT__) ((((__INTERRUPT__) & SYSCFG_IT_FPU_IOC) == SYSCFG_IT_FPU_IOC) || \ + (((__INTERRUPT__) & SYSCFG_IT_FPU_DZC) == SYSCFG_IT_FPU_DZC) || \ + (((__INTERRUPT__) & SYSCFG_IT_FPU_UFC) == SYSCFG_IT_FPU_UFC) || \ + (((__INTERRUPT__) & SYSCFG_IT_FPU_OFC) == SYSCFG_IT_FPU_OFC) || \ + (((__INTERRUPT__) & SYSCFG_IT_FPU_IDC) == SYSCFG_IT_FPU_IDC) || \ + (((__INTERRUPT__) & SYSCFG_IT_FPU_IXC) == SYSCFG_IT_FPU_IXC)) + +#define IS_SYSCFG_BREAK_CONFIG(__CONFIG__) (((__CONFIG__) == SYSCFG_BREAK_ECC) || \ + ((__CONFIG__) == SYSCFG_BREAK_PVD) || \ + ((__CONFIG__) == SYSCFG_BREAK_SRAM2_PARITY) || \ + ((__CONFIG__) == SYSCFG_BREAK_LOCKUP)) + +#define IS_SYSCFG_SRAM2WRP_PAGE(__PAGE__) (((__PAGE__) > 0U) && ((__PAGE__) <= 0xFFFFFFFFUL)) + +#if defined(VREFBUF) +#define IS_SYSCFG_VREFBUF_VOLTAGE_SCALE(__SCALE__) (((__SCALE__) == SYSCFG_VREFBUF_VOLTAGE_SCALE0) || \ + ((__SCALE__) == SYSCFG_VREFBUF_VOLTAGE_SCALE1)) + +#define IS_SYSCFG_VREFBUF_HIGH_IMPEDANCE(__VALUE__) (((__VALUE__) == SYSCFG_VREFBUF_HIGH_IMPEDANCE_DISABLE) || \ + ((__VALUE__) == SYSCFG_VREFBUF_HIGH_IMPEDANCE_ENABLE)) + +#define IS_SYSCFG_VREFBUF_TRIMMING(__VALUE__) (((__VALUE__) > 0U) && ((__VALUE__) <= VREFBUF_CCR_TRIM)) +#endif /* VREFBUF */ + +#if defined(SYSCFG_FASTMODEPLUS_PB8) && defined(SYSCFG_FASTMODEPLUS_PB9) +#define IS_SYSCFG_FASTMODEPLUS(__PIN__) ((((__PIN__) & SYSCFG_FASTMODEPLUS_PB6) == SYSCFG_FASTMODEPLUS_PB6) || \ + (((__PIN__) & SYSCFG_FASTMODEPLUS_PB7) == SYSCFG_FASTMODEPLUS_PB7) || \ + (((__PIN__) & SYSCFG_FASTMODEPLUS_PB8) == SYSCFG_FASTMODEPLUS_PB8) || \ + (((__PIN__) & SYSCFG_FASTMODEPLUS_PB9) == SYSCFG_FASTMODEPLUS_PB9)) +#elif defined(SYSCFG_FASTMODEPLUS_PB8) +#define IS_SYSCFG_FASTMODEPLUS(__PIN__) ((((__PIN__) & SYSCFG_FASTMODEPLUS_PB6) == SYSCFG_FASTMODEPLUS_PB6) || \ + (((__PIN__) & SYSCFG_FASTMODEPLUS_PB7) == SYSCFG_FASTMODEPLUS_PB7) || \ + (((__PIN__) & SYSCFG_FASTMODEPLUS_PB8) == SYSCFG_FASTMODEPLUS_PB8)) +#elif defined(SYSCFG_FASTMODEPLUS_PB9) +#define IS_SYSCFG_FASTMODEPLUS(__PIN__) ((((__PIN__) & SYSCFG_FASTMODEPLUS_PB6) == SYSCFG_FASTMODEPLUS_PB6) || \ + (((__PIN__) & SYSCFG_FASTMODEPLUS_PB7) == SYSCFG_FASTMODEPLUS_PB7) || \ + (((__PIN__) & SYSCFG_FASTMODEPLUS_PB9) == SYSCFG_FASTMODEPLUS_PB9)) +#else +#define IS_SYSCFG_FASTMODEPLUS(__PIN__) ((((__PIN__) & SYSCFG_FASTMODEPLUS_PB6) == SYSCFG_FASTMODEPLUS_PB6) || \ + (((__PIN__) & SYSCFG_FASTMODEPLUS_PB7) == SYSCFG_FASTMODEPLUS_PB7)) +#endif +/** + * @} + */ + +/** + * @} + */ + +/* Exported variables --------------------------------------------------------*/ + +/** @addtogroup HAL_Exported_Variables + * @{ + */ +extern __IO uint32_t uwTick; +extern uint32_t uwTickPrio; +extern HAL_TickFreqTypeDef uwTickFreq; +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ + +/** @addtogroup HAL_Exported_Functions + * @{ + */ + +/** @addtogroup HAL_Exported_Functions_Group1 + * @{ + */ + +/* Initialization and de-initialization functions ******************************/ +HAL_StatusTypeDef HAL_Init(void); +HAL_StatusTypeDef HAL_DeInit(void); +void HAL_MspInit(void); +void HAL_MspDeInit(void); +HAL_StatusTypeDef HAL_InitTick (uint32_t TickPriority); + +/** + * @} + */ + +/** @addtogroup HAL_Exported_Functions_Group2 + * @{ + */ + +/* Peripheral Control functions ************************************************/ +void HAL_IncTick(void); +void HAL_Delay(uint32_t Delay); +uint32_t HAL_GetTick(void); +uint32_t HAL_GetTickPrio(void); +HAL_StatusTypeDef HAL_SetTickFreq(HAL_TickFreqTypeDef Freq); +HAL_TickFreqTypeDef HAL_GetTickFreq(void); +void HAL_SuspendTick(void); +void HAL_ResumeTick(void); +uint32_t HAL_GetHalVersion(void); +uint32_t HAL_GetREVID(void); +uint32_t HAL_GetDEVID(void); +uint32_t HAL_GetUIDw0(void); +uint32_t HAL_GetUIDw1(void); +uint32_t HAL_GetUIDw2(void); + +/** + * @} + */ + +/** @addtogroup HAL_Exported_Functions_Group3 + * @{ + */ + +/* DBGMCU Peripheral Control functions *****************************************/ +void HAL_DBGMCU_EnableDBGSleepMode(void); +void HAL_DBGMCU_DisableDBGSleepMode(void); +void HAL_DBGMCU_EnableDBGStopMode(void); +void HAL_DBGMCU_DisableDBGStopMode(void); +void HAL_DBGMCU_EnableDBGStandbyMode(void); +void HAL_DBGMCU_DisableDBGStandbyMode(void); + +/** + * @} + */ + +/** @addtogroup HAL_Exported_Functions_Group4 + * @{ + */ + +/* SYSCFG Control functions ****************************************************/ +void HAL_SYSCFG_SRAM2Erase(void); +void HAL_SYSCFG_EnableMemorySwappingBank(void); +void HAL_SYSCFG_DisableMemorySwappingBank(void); + +#if defined(VREFBUF) +void HAL_SYSCFG_VREFBUF_VoltageScalingConfig(uint32_t VoltageScaling); +void HAL_SYSCFG_VREFBUF_HighImpedanceConfig(uint32_t Mode); +void HAL_SYSCFG_VREFBUF_TrimmingConfig(uint32_t TrimmingValue); +HAL_StatusTypeDef HAL_SYSCFG_EnableVREFBUF(void); +void HAL_SYSCFG_DisableVREFBUF(void); +#endif /* VREFBUF */ + +void HAL_SYSCFG_EnableIOAnalogSwitchBooster(void); +void HAL_SYSCFG_DisableIOAnalogSwitchBooster(void); + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32L4xx_HAL_H */ diff --git a/CablePositioning_IAP_V1.0/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_cortex.h b/CablePositioning_IAP_V1.0/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_cortex.h index 6ca226b..be451ae 100644 --- a/CablePositioning_IAP_V1.0/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_cortex.h +++ b/CablePositioning_IAP_V1.0/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_cortex.h @@ -1,420 +1,422 @@ -/** - ****************************************************************************** - * @file stm32l4xx_hal_cortex.h - * @author MCD Application Team - * @brief Header file of CORTEX HAL module. - ****************************************************************************** - * @attention - * - * Copyright (c) 2017 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file in - * the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef STM32L4xx_HAL_CORTEX_H -#define STM32L4xx_HAL_CORTEX_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32l4xx_hal_def.h" - -/** @addtogroup STM32L4xx_HAL_Driver - * @{ - */ - -/** @defgroup CORTEX CORTEX - * @brief CORTEX HAL module driver - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ -/** @defgroup CORTEX_Exported_Types CORTEX Exported Types - * @{ - */ - -#if (__MPU_PRESENT == 1) -/** @defgroup CORTEX_MPU_Region_Initialization_Structure_definition MPU Region Initialization Structure Definition - * @brief MPU Region initialization structure - * @{ - */ -typedef struct -{ - uint8_t Enable; /*!< Specifies the status of the region. - This parameter can be a value of @ref CORTEX_MPU_Region_Enable */ - uint8_t Number; /*!< Specifies the number of the region to protect. - This parameter can be a value of @ref CORTEX_MPU_Region_Number */ - uint32_t BaseAddress; /*!< Specifies the base address of the region to protect. */ - uint8_t Size; /*!< Specifies the size of the region to protect. - This parameter can be a value of @ref CORTEX_MPU_Region_Size */ - uint8_t SubRegionDisable; /*!< Specifies the number of the subregion protection to disable. - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF */ - uint8_t TypeExtField; /*!< Specifies the TEX field level. - This parameter can be a value of @ref CORTEX_MPU_TEX_Levels */ - uint8_t AccessPermission; /*!< Specifies the region access permission type. - This parameter can be a value of @ref CORTEX_MPU_Region_Permission_Attributes */ - uint8_t DisableExec; /*!< Specifies the instruction access status. - This parameter can be a value of @ref CORTEX_MPU_Instruction_Access */ - uint8_t IsShareable; /*!< Specifies the shareability status of the protected region. - This parameter can be a value of @ref CORTEX_MPU_Access_Shareable */ - uint8_t IsCacheable; /*!< Specifies the cacheable status of the region protected. - This parameter can be a value of @ref CORTEX_MPU_Access_Cacheable */ - uint8_t IsBufferable; /*!< Specifies the bufferable status of the protected region. - This parameter can be a value of @ref CORTEX_MPU_Access_Bufferable */ -}MPU_Region_InitTypeDef; -/** - * @} - */ -#endif /* __MPU_PRESENT */ - -/** - * @} - */ - -/* Exported constants --------------------------------------------------------*/ - -/** @defgroup CORTEX_Exported_Constants CORTEX Exported Constants - * @{ - */ - -/** @defgroup CORTEX_Preemption_Priority_Group CORTEX Preemption Priority Group - * @{ - */ -#define NVIC_PRIORITYGROUP_0 ((uint32_t)0x00000007) /*!< 0 bit for pre-emption priority, - 4 bits for subpriority */ -#define NVIC_PRIORITYGROUP_1 ((uint32_t)0x00000006) /*!< 1 bit for pre-emption priority, - 3 bits for subpriority */ -#define NVIC_PRIORITYGROUP_2 ((uint32_t)0x00000005) /*!< 2 bits for pre-emption priority, - 2 bits for subpriority */ -#define NVIC_PRIORITYGROUP_3 ((uint32_t)0x00000004) /*!< 3 bits for pre-emption priority, - 1 bit for subpriority */ -#define NVIC_PRIORITYGROUP_4 ((uint32_t)0x00000003) /*!< 4 bits for pre-emption priority, - 0 bit for subpriority */ -/** - * @} - */ - -/** @defgroup CORTEX_SysTick_clock_source CORTEX SysTick clock source - * @{ - */ -#define SYSTICK_CLKSOURCE_HCLK_DIV8 0x00000000U -#define SYSTICK_CLKSOURCE_HCLK 0x00000004U - -/** - * @} - */ - -#if (__MPU_PRESENT == 1) -/** @defgroup CORTEX_MPU_HFNMI_PRIVDEF_Control CORTEX MPU HFNMI and PRIVILEGED Access control - * @{ - */ -#define MPU_HFNMI_PRIVDEF_NONE 0x00000000U -#define MPU_HARDFAULT_NMI (MPU_CTRL_HFNMIENA_Msk) -#define MPU_PRIVILEGED_DEFAULT (MPU_CTRL_PRIVDEFENA_Msk) -#define MPU_HFNMI_PRIVDEF (MPU_CTRL_HFNMIENA_Msk | MPU_CTRL_PRIVDEFENA_Msk) -/** - * @} - */ - -/** @defgroup CORTEX_MPU_Region_Enable CORTEX MPU Region Enable - * @{ - */ -#define MPU_REGION_ENABLE ((uint8_t)0x01) -#define MPU_REGION_DISABLE ((uint8_t)0x00) -/** - * @} - */ - -/** @defgroup CORTEX_MPU_Instruction_Access CORTEX MPU Instruction Access - * @{ - */ -#define MPU_INSTRUCTION_ACCESS_ENABLE ((uint8_t)0x00) -#define MPU_INSTRUCTION_ACCESS_DISABLE ((uint8_t)0x01) -/** - * @} - */ - -/** @defgroup CORTEX_MPU_Access_Shareable CORTEX MPU Instruction Access Shareable - * @{ - */ -#define MPU_ACCESS_SHAREABLE ((uint8_t)0x01) -#define MPU_ACCESS_NOT_SHAREABLE ((uint8_t)0x00) -/** - * @} - */ - -/** @defgroup CORTEX_MPU_Access_Cacheable CORTEX MPU Instruction Access Cacheable - * @{ - */ -#define MPU_ACCESS_CACHEABLE ((uint8_t)0x01) -#define MPU_ACCESS_NOT_CACHEABLE ((uint8_t)0x00) -/** - * @} - */ - -/** @defgroup CORTEX_MPU_Access_Bufferable CORTEX MPU Instruction Access Bufferable - * @{ - */ -#define MPU_ACCESS_BUFFERABLE ((uint8_t)0x01) -#define MPU_ACCESS_NOT_BUFFERABLE ((uint8_t)0x00) -/** - * @} - */ - -/** @defgroup CORTEX_MPU_TEX_Levels CORTEX MPU TEX Levels - * @{ - */ -#define MPU_TEX_LEVEL0 ((uint8_t)0x00) -#define MPU_TEX_LEVEL1 ((uint8_t)0x01) -#define MPU_TEX_LEVEL2 ((uint8_t)0x02) -#define MPU_TEX_LEVEL4 ((uint8_t)0x04) -/** - * @} - */ - -/** @defgroup CORTEX_MPU_Region_Size CORTEX MPU Region Size - * @{ - */ -#define MPU_REGION_SIZE_32B ((uint8_t)0x04) -#define MPU_REGION_SIZE_64B ((uint8_t)0x05) -#define MPU_REGION_SIZE_128B ((uint8_t)0x06) -#define MPU_REGION_SIZE_256B ((uint8_t)0x07) -#define MPU_REGION_SIZE_512B ((uint8_t)0x08) -#define MPU_REGION_SIZE_1KB ((uint8_t)0x09) -#define MPU_REGION_SIZE_2KB ((uint8_t)0x0A) -#define MPU_REGION_SIZE_4KB ((uint8_t)0x0B) -#define MPU_REGION_SIZE_8KB ((uint8_t)0x0C) -#define MPU_REGION_SIZE_16KB ((uint8_t)0x0D) -#define MPU_REGION_SIZE_32KB ((uint8_t)0x0E) -#define MPU_REGION_SIZE_64KB ((uint8_t)0x0F) -#define MPU_REGION_SIZE_128KB ((uint8_t)0x10) -#define MPU_REGION_SIZE_256KB ((uint8_t)0x11) -#define MPU_REGION_SIZE_512KB ((uint8_t)0x12) -#define MPU_REGION_SIZE_1MB ((uint8_t)0x13) -#define MPU_REGION_SIZE_2MB ((uint8_t)0x14) -#define MPU_REGION_SIZE_4MB ((uint8_t)0x15) -#define MPU_REGION_SIZE_8MB ((uint8_t)0x16) -#define MPU_REGION_SIZE_16MB ((uint8_t)0x17) -#define MPU_REGION_SIZE_32MB ((uint8_t)0x18) -#define MPU_REGION_SIZE_64MB ((uint8_t)0x19) -#define MPU_REGION_SIZE_128MB ((uint8_t)0x1A) -#define MPU_REGION_SIZE_256MB ((uint8_t)0x1B) -#define MPU_REGION_SIZE_512MB ((uint8_t)0x1C) -#define MPU_REGION_SIZE_1GB ((uint8_t)0x1D) -#define MPU_REGION_SIZE_2GB ((uint8_t)0x1E) -#define MPU_REGION_SIZE_4GB ((uint8_t)0x1F) -/** - * @} - */ - -/** @defgroup CORTEX_MPU_Region_Permission_Attributes CORTEX MPU Region Permission Attributes - * @{ - */ -#define MPU_REGION_NO_ACCESS ((uint8_t)0x00) -#define MPU_REGION_PRIV_RW ((uint8_t)0x01) -#define MPU_REGION_PRIV_RW_URO ((uint8_t)0x02) -#define MPU_REGION_FULL_ACCESS ((uint8_t)0x03) -#define MPU_REGION_PRIV_RO ((uint8_t)0x05) -#define MPU_REGION_PRIV_RO_URO ((uint8_t)0x06) -/** - * @} - */ - -/** @defgroup CORTEX_MPU_Region_Number CORTEX MPU Region Number - * @{ - */ -#define MPU_REGION_NUMBER0 ((uint8_t)0x00) -#define MPU_REGION_NUMBER1 ((uint8_t)0x01) -#define MPU_REGION_NUMBER2 ((uint8_t)0x02) -#define MPU_REGION_NUMBER3 ((uint8_t)0x03) -#define MPU_REGION_NUMBER4 ((uint8_t)0x04) -#define MPU_REGION_NUMBER5 ((uint8_t)0x05) -#define MPU_REGION_NUMBER6 ((uint8_t)0x06) -#define MPU_REGION_NUMBER7 ((uint8_t)0x07) -/** - * @} - */ -#endif /* __MPU_PRESENT */ - -/** - * @} - */ - -/* Exported macros -----------------------------------------------------------*/ -/** @defgroup CORTEX_Exported_Macros CORTEX Exported Macros - * @{ - */ - -/** - * @} - */ - -/* Exported functions --------------------------------------------------------*/ -/** @defgroup CORTEX_Exported_Functions CORTEX Exported Functions - * @{ - */ - -/** @defgroup CORTEX_Exported_Functions_Group1 Initialization and Configuration functions - * @brief Initialization and Configuration functions - * @{ - */ -/* Initialization and Configuration functions *****************************/ -void HAL_NVIC_SetPriorityGrouping(uint32_t PriorityGroup); -void HAL_NVIC_SetPriority(IRQn_Type IRQn, uint32_t PreemptPriority, uint32_t SubPriority); -void HAL_NVIC_EnableIRQ(IRQn_Type IRQn); -void HAL_NVIC_DisableIRQ(IRQn_Type IRQn); -void HAL_NVIC_SystemReset(void); -uint32_t HAL_SYSTICK_Config(uint32_t TicksNumb); - -/** - * @} - */ - -/** @defgroup CORTEX_Exported_Functions_Group2 Peripheral Control functions - * @brief Cortex control functions - * @{ - */ -/* Peripheral Control functions ***********************************************/ -uint32_t HAL_NVIC_GetPriorityGrouping(void); -void HAL_NVIC_GetPriority(IRQn_Type IRQn, uint32_t PriorityGroup, uint32_t* pPreemptPriority, uint32_t* pSubPriority); -uint32_t HAL_NVIC_GetPendingIRQ(IRQn_Type IRQn); -void HAL_NVIC_SetPendingIRQ(IRQn_Type IRQn); -void HAL_NVIC_ClearPendingIRQ(IRQn_Type IRQn); -uint32_t HAL_NVIC_GetActive(IRQn_Type IRQn); -void HAL_SYSTICK_CLKSourceConfig(uint32_t CLKSource); -void HAL_SYSTICK_IRQHandler(void); -void HAL_SYSTICK_Callback(void); - -#if (__MPU_PRESENT == 1) -void HAL_MPU_Enable(uint32_t MPU_Control); -void HAL_MPU_Disable(void); -void HAL_MPU_ConfigRegion(MPU_Region_InitTypeDef *MPU_Init); -#endif /* __MPU_PRESENT */ -/** - * @} - */ - -/** - * @} - */ - -/* Private types -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private constants ---------------------------------------------------------*/ -/* Private macros ------------------------------------------------------------*/ -/** @defgroup CORTEX_Private_Macros CORTEX Private Macros - * @{ - */ -#define IS_NVIC_PRIORITY_GROUP(GROUP) (((GROUP) == NVIC_PRIORITYGROUP_0) || \ - ((GROUP) == NVIC_PRIORITYGROUP_1) || \ - ((GROUP) == NVIC_PRIORITYGROUP_2) || \ - ((GROUP) == NVIC_PRIORITYGROUP_3) || \ - ((GROUP) == NVIC_PRIORITYGROUP_4)) - -#define IS_NVIC_PREEMPTION_PRIORITY(PRIORITY) ((PRIORITY) < 0x10) - -#define IS_NVIC_SUB_PRIORITY(PRIORITY) ((PRIORITY) < 0x10) - -#define IS_NVIC_DEVICE_IRQ(IRQ) ((IRQ) >= 0x00) - -#define IS_SYSTICK_CLK_SOURCE(SOURCE) (((SOURCE) == SYSTICK_CLKSOURCE_HCLK) || \ - ((SOURCE) == SYSTICK_CLKSOURCE_HCLK_DIV8)) - -#if (__MPU_PRESENT == 1) -#define IS_MPU_REGION_ENABLE(STATE) (((STATE) == MPU_REGION_ENABLE) || \ - ((STATE) == MPU_REGION_DISABLE)) - -#define IS_MPU_INSTRUCTION_ACCESS(STATE) (((STATE) == MPU_INSTRUCTION_ACCESS_ENABLE) || \ - ((STATE) == MPU_INSTRUCTION_ACCESS_DISABLE)) - -#define IS_MPU_ACCESS_SHAREABLE(STATE) (((STATE) == MPU_ACCESS_SHAREABLE) || \ - ((STATE) == MPU_ACCESS_NOT_SHAREABLE)) - -#define IS_MPU_ACCESS_CACHEABLE(STATE) (((STATE) == MPU_ACCESS_CACHEABLE) || \ - ((STATE) == MPU_ACCESS_NOT_CACHEABLE)) - -#define IS_MPU_ACCESS_BUFFERABLE(STATE) (((STATE) == MPU_ACCESS_BUFFERABLE) || \ - ((STATE) == MPU_ACCESS_NOT_BUFFERABLE)) - -#define IS_MPU_TEX_LEVEL(TYPE) (((TYPE) == MPU_TEX_LEVEL0) || \ - ((TYPE) == MPU_TEX_LEVEL1) || \ - ((TYPE) == MPU_TEX_LEVEL2) || \ - ((TYPE) == MPU_TEX_LEVEL4)) - -#define IS_MPU_REGION_PERMISSION_ATTRIBUTE(TYPE) (((TYPE) == MPU_REGION_NO_ACCESS) || \ - ((TYPE) == MPU_REGION_PRIV_RW) || \ - ((TYPE) == MPU_REGION_PRIV_RW_URO) || \ - ((TYPE) == MPU_REGION_FULL_ACCESS) || \ - ((TYPE) == MPU_REGION_PRIV_RO) || \ - ((TYPE) == MPU_REGION_PRIV_RO_URO)) - -#define IS_MPU_REGION_NUMBER(NUMBER) (((NUMBER) == MPU_REGION_NUMBER0) || \ - ((NUMBER) == MPU_REGION_NUMBER1) || \ - ((NUMBER) == MPU_REGION_NUMBER2) || \ - ((NUMBER) == MPU_REGION_NUMBER3) || \ - ((NUMBER) == MPU_REGION_NUMBER4) || \ - ((NUMBER) == MPU_REGION_NUMBER5) || \ - ((NUMBER) == MPU_REGION_NUMBER6) || \ - ((NUMBER) == MPU_REGION_NUMBER7)) - -#define IS_MPU_REGION_SIZE(SIZE) (((SIZE) == MPU_REGION_SIZE_32B) || \ - ((SIZE) == MPU_REGION_SIZE_64B) || \ - ((SIZE) == MPU_REGION_SIZE_128B) || \ - ((SIZE) == MPU_REGION_SIZE_256B) || \ - ((SIZE) == MPU_REGION_SIZE_512B) || \ - ((SIZE) == MPU_REGION_SIZE_1KB) || \ - ((SIZE) == MPU_REGION_SIZE_2KB) || \ - ((SIZE) == MPU_REGION_SIZE_4KB) || \ - ((SIZE) == MPU_REGION_SIZE_8KB) || \ - ((SIZE) == MPU_REGION_SIZE_16KB) || \ - ((SIZE) == MPU_REGION_SIZE_32KB) || \ - ((SIZE) == MPU_REGION_SIZE_64KB) || \ - ((SIZE) == MPU_REGION_SIZE_128KB) || \ - ((SIZE) == MPU_REGION_SIZE_256KB) || \ - ((SIZE) == MPU_REGION_SIZE_512KB) || \ - ((SIZE) == MPU_REGION_SIZE_1MB) || \ - ((SIZE) == MPU_REGION_SIZE_2MB) || \ - ((SIZE) == MPU_REGION_SIZE_4MB) || \ - ((SIZE) == MPU_REGION_SIZE_8MB) || \ - ((SIZE) == MPU_REGION_SIZE_16MB) || \ - ((SIZE) == MPU_REGION_SIZE_32MB) || \ - ((SIZE) == MPU_REGION_SIZE_64MB) || \ - ((SIZE) == MPU_REGION_SIZE_128MB) || \ - ((SIZE) == MPU_REGION_SIZE_256MB) || \ - ((SIZE) == MPU_REGION_SIZE_512MB) || \ - ((SIZE) == MPU_REGION_SIZE_1GB) || \ - ((SIZE) == MPU_REGION_SIZE_2GB) || \ - ((SIZE) == MPU_REGION_SIZE_4GB)) - -#define IS_MPU_SUB_REGION_DISABLE(SUBREGION) ((SUBREGION) < (uint16_t)0x00FF) -#endif /* __MPU_PRESENT */ - -/** - * @} - */ - -/* Private functions ---------------------------------------------------------*/ - -/** - * @} - */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /* STM32L4xx_HAL_CORTEX_H */ - - +/** + ****************************************************************************** + * @file stm32l4xx_hal_cortex.h + * @author MCD Application Team + * @brief Header file of CORTEX HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file in + * the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32L4xx_HAL_CORTEX_H +#define STM32L4xx_HAL_CORTEX_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l4xx_hal_def.h" + +/** @addtogroup STM32L4xx_HAL_Driver + * @{ + */ + +/** @defgroup CORTEX CORTEX + * @brief CORTEX HAL module driver + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup CORTEX_Exported_Types CORTEX Exported Types + * @{ + */ + +#if (__MPU_PRESENT == 1) +/** @defgroup CORTEX_MPU_Region_Initialization_Structure_definition MPU Region Initialization Structure Definition + * @brief MPU Region initialization structure + * @{ + */ +typedef struct +{ + uint8_t Enable; /*!< Specifies the status of the region. + This parameter can be a value of @ref CORTEX_MPU_Region_Enable */ + uint8_t Number; /*!< Specifies the number of the region to protect. + This parameter can be a value of @ref CORTEX_MPU_Region_Number */ + uint32_t BaseAddress; /*!< Specifies the base address of the region to protect. */ + uint8_t Size; /*!< Specifies the size of the region to protect. + This parameter can be a value of @ref CORTEX_MPU_Region_Size */ + uint8_t SubRegionDisable; /*!< Specifies the number of the subregion protection to disable. + This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF */ + uint8_t TypeExtField; /*!< Specifies the TEX field level. + This parameter can be a value of @ref CORTEX_MPU_TEX_Levels */ + uint8_t AccessPermission; /*!< Specifies the region access permission type. + This parameter can be a value of @ref CORTEX_MPU_Region_Permission_Attributes */ + uint8_t DisableExec; /*!< Specifies the instruction access status. + This parameter can be a value of @ref CORTEX_MPU_Instruction_Access */ + uint8_t IsShareable; /*!< Specifies the shareability status of the protected region. + This parameter can be a value of @ref CORTEX_MPU_Access_Shareable */ + uint8_t IsCacheable; /*!< Specifies the cacheable status of the region protected. + This parameter can be a value of @ref CORTEX_MPU_Access_Cacheable */ + uint8_t IsBufferable; /*!< Specifies the bufferable status of the protected region. + This parameter can be a value of @ref CORTEX_MPU_Access_Bufferable */ +}MPU_Region_InitTypeDef; +/** + * @} + */ +#endif /* __MPU_PRESENT */ + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup CORTEX_Exported_Constants CORTEX Exported Constants + * @{ + */ + +/** @defgroup CORTEX_Preemption_Priority_Group CORTEX Preemption Priority Group + * @{ + */ +#define NVIC_PRIORITYGROUP_0 ((uint32_t)0x00000007) /*!< 0 bit for pre-emption priority, + 4 bits for subpriority */ +#define NVIC_PRIORITYGROUP_1 ((uint32_t)0x00000006) /*!< 1 bit for pre-emption priority, + 3 bits for subpriority */ +#define NVIC_PRIORITYGROUP_2 ((uint32_t)0x00000005) /*!< 2 bits for pre-emption priority, + 2 bits for subpriority */ +#define NVIC_PRIORITYGROUP_3 ((uint32_t)0x00000004) /*!< 3 bits for pre-emption priority, + 1 bit for subpriority */ +#define NVIC_PRIORITYGROUP_4 ((uint32_t)0x00000003) /*!< 4 bits for pre-emption priority, + 0 bit for subpriority */ +/** + * @} + */ + +/** @defgroup CORTEX_SysTick_clock_source CORTEX SysTick clock source + * @{ + */ +#define SYSTICK_CLKSOURCE_HCLK_DIV8 0x00000000U +#define SYSTICK_CLKSOURCE_HCLK 0x00000004U + +/** + * @} + */ + +#if (__MPU_PRESENT == 1) +/** @defgroup CORTEX_MPU_HFNMI_PRIVDEF_Control CORTEX MPU HFNMI and PRIVILEGED Access control + * @{ + */ +#define MPU_HFNMI_PRIVDEF_NONE 0x00000000U +#define MPU_HARDFAULT_NMI (MPU_CTRL_HFNMIENA_Msk) +#define MPU_PRIVILEGED_DEFAULT (MPU_CTRL_PRIVDEFENA_Msk) +#define MPU_HFNMI_PRIVDEF (MPU_CTRL_HFNMIENA_Msk | MPU_CTRL_PRIVDEFENA_Msk) +/** + * @} + */ + +/** @defgroup CORTEX_MPU_Region_Enable CORTEX MPU Region Enable + * @{ + */ +#define MPU_REGION_ENABLE ((uint8_t)0x01) +#define MPU_REGION_DISABLE ((uint8_t)0x00) +/** + * @} + */ + +/** @defgroup CORTEX_MPU_Instruction_Access CORTEX MPU Instruction Access + * @{ + */ +#define MPU_INSTRUCTION_ACCESS_ENABLE ((uint8_t)0x00) +#define MPU_INSTRUCTION_ACCESS_DISABLE ((uint8_t)0x01) +/** + * @} + */ + +/** @defgroup CORTEX_MPU_Access_Shareable CORTEX MPU Instruction Access Shareable + * @{ + */ +#define MPU_ACCESS_SHAREABLE ((uint8_t)0x01) +#define MPU_ACCESS_NOT_SHAREABLE ((uint8_t)0x00) +/** + * @} + */ + +/** @defgroup CORTEX_MPU_Access_Cacheable CORTEX MPU Instruction Access Cacheable + * @{ + */ +#define MPU_ACCESS_CACHEABLE ((uint8_t)0x01) +#define MPU_ACCESS_NOT_CACHEABLE ((uint8_t)0x00) +/** + * @} + */ + +/** @defgroup CORTEX_MPU_Access_Bufferable CORTEX MPU Instruction Access Bufferable + * @{ + */ +#define MPU_ACCESS_BUFFERABLE ((uint8_t)0x01) +#define MPU_ACCESS_NOT_BUFFERABLE ((uint8_t)0x00) +/** + * @} + */ + +/** @defgroup CORTEX_MPU_TEX_Levels CORTEX MPU TEX Levels + * @{ + */ +#define MPU_TEX_LEVEL0 ((uint8_t)0x00) +#define MPU_TEX_LEVEL1 ((uint8_t)0x01) +#define MPU_TEX_LEVEL2 ((uint8_t)0x02) +#define MPU_TEX_LEVEL4 ((uint8_t)0x04) +/** + * @} + */ + +/** @defgroup CORTEX_MPU_Region_Size CORTEX MPU Region Size + * @{ + */ +#define MPU_REGION_SIZE_32B ((uint8_t)0x04) +#define MPU_REGION_SIZE_64B ((uint8_t)0x05) +#define MPU_REGION_SIZE_128B ((uint8_t)0x06) +#define MPU_REGION_SIZE_256B ((uint8_t)0x07) +#define MPU_REGION_SIZE_512B ((uint8_t)0x08) +#define MPU_REGION_SIZE_1KB ((uint8_t)0x09) +#define MPU_REGION_SIZE_2KB ((uint8_t)0x0A) +#define MPU_REGION_SIZE_4KB ((uint8_t)0x0B) +#define MPU_REGION_SIZE_8KB ((uint8_t)0x0C) +#define MPU_REGION_SIZE_16KB ((uint8_t)0x0D) +#define MPU_REGION_SIZE_32KB ((uint8_t)0x0E) +#define MPU_REGION_SIZE_64KB ((uint8_t)0x0F) +#define MPU_REGION_SIZE_128KB ((uint8_t)0x10) +#define MPU_REGION_SIZE_256KB ((uint8_t)0x11) +#define MPU_REGION_SIZE_512KB ((uint8_t)0x12) +#define MPU_REGION_SIZE_1MB ((uint8_t)0x13) +#define MPU_REGION_SIZE_2MB ((uint8_t)0x14) +#define MPU_REGION_SIZE_4MB ((uint8_t)0x15) +#define MPU_REGION_SIZE_8MB ((uint8_t)0x16) +#define MPU_REGION_SIZE_16MB ((uint8_t)0x17) +#define MPU_REGION_SIZE_32MB ((uint8_t)0x18) +#define MPU_REGION_SIZE_64MB ((uint8_t)0x19) +#define MPU_REGION_SIZE_128MB ((uint8_t)0x1A) +#define MPU_REGION_SIZE_256MB ((uint8_t)0x1B) +#define MPU_REGION_SIZE_512MB ((uint8_t)0x1C) +#define MPU_REGION_SIZE_1GB ((uint8_t)0x1D) +#define MPU_REGION_SIZE_2GB ((uint8_t)0x1E) +#define MPU_REGION_SIZE_4GB ((uint8_t)0x1F) +/** + * @} + */ + +/** @defgroup CORTEX_MPU_Region_Permission_Attributes CORTEX MPU Region Permission Attributes + * @{ + */ +#define MPU_REGION_NO_ACCESS ((uint8_t)0x00) +#define MPU_REGION_PRIV_RW ((uint8_t)0x01) +#define MPU_REGION_PRIV_RW_URO ((uint8_t)0x02) +#define MPU_REGION_FULL_ACCESS ((uint8_t)0x03) +#define MPU_REGION_PRIV_RO ((uint8_t)0x05) +#define MPU_REGION_PRIV_RO_URO ((uint8_t)0x06) +/** + * @} + */ + +/** @defgroup CORTEX_MPU_Region_Number CORTEX MPU Region Number + * @{ + */ +#define MPU_REGION_NUMBER0 ((uint8_t)0x00) +#define MPU_REGION_NUMBER1 ((uint8_t)0x01) +#define MPU_REGION_NUMBER2 ((uint8_t)0x02) +#define MPU_REGION_NUMBER3 ((uint8_t)0x03) +#define MPU_REGION_NUMBER4 ((uint8_t)0x04) +#define MPU_REGION_NUMBER5 ((uint8_t)0x05) +#define MPU_REGION_NUMBER6 ((uint8_t)0x06) +#define MPU_REGION_NUMBER7 ((uint8_t)0x07) +/** + * @} + */ +#endif /* __MPU_PRESENT */ + +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ +/** @defgroup CORTEX_Exported_Macros CORTEX Exported Macros + * @{ + */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup CORTEX_Exported_Functions CORTEX Exported Functions + * @{ + */ + +/** @defgroup CORTEX_Exported_Functions_Group1 Initialization and Configuration functions + * @brief Initialization and Configuration functions + * @{ + */ +/* Initialization and Configuration functions *****************************/ +void HAL_NVIC_SetPriorityGrouping(uint32_t PriorityGroup); +void HAL_NVIC_SetPriority(IRQn_Type IRQn, uint32_t PreemptPriority, uint32_t SubPriority); +void HAL_NVIC_EnableIRQ(IRQn_Type IRQn); +void HAL_NVIC_DisableIRQ(IRQn_Type IRQn); +void HAL_NVIC_SystemReset(void); +uint32_t HAL_SYSTICK_Config(uint32_t TicksNumb); + +/** + * @} + */ + +/** @defgroup CORTEX_Exported_Functions_Group2 Peripheral Control functions + * @brief Cortex control functions + * @{ + */ +/* Peripheral Control functions ***********************************************/ +uint32_t HAL_NVIC_GetPriorityGrouping(void); +void HAL_NVIC_GetPriority(IRQn_Type IRQn, uint32_t PriorityGroup, uint32_t* pPreemptPriority, uint32_t* pSubPriority); +uint32_t HAL_NVIC_GetPendingIRQ(IRQn_Type IRQn); +void HAL_NVIC_SetPendingIRQ(IRQn_Type IRQn); +void HAL_NVIC_ClearPendingIRQ(IRQn_Type IRQn); +uint32_t HAL_NVIC_GetActive(IRQn_Type IRQn); +void HAL_SYSTICK_CLKSourceConfig(uint32_t CLKSource); +void HAL_SYSTICK_IRQHandler(void); +void HAL_SYSTICK_Callback(void); + +#if (__MPU_PRESENT == 1) +void HAL_MPU_Enable(uint32_t MPU_Control); +void HAL_MPU_Disable(void); +void HAL_MPU_EnableRegion(uint32_t RegionNumber); +void HAL_MPU_DisableRegion(uint32_t RegionNumber); +void HAL_MPU_ConfigRegion(MPU_Region_InitTypeDef *MPU_Init); +#endif /* __MPU_PRESENT */ +/** + * @} + */ + +/** + * @} + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +/** @defgroup CORTEX_Private_Macros CORTEX Private Macros + * @{ + */ +#define IS_NVIC_PRIORITY_GROUP(GROUP) (((GROUP) == NVIC_PRIORITYGROUP_0) || \ + ((GROUP) == NVIC_PRIORITYGROUP_1) || \ + ((GROUP) == NVIC_PRIORITYGROUP_2) || \ + ((GROUP) == NVIC_PRIORITYGROUP_3) || \ + ((GROUP) == NVIC_PRIORITYGROUP_4)) + +#define IS_NVIC_PREEMPTION_PRIORITY(PRIORITY) ((PRIORITY) < 0x10) + +#define IS_NVIC_SUB_PRIORITY(PRIORITY) ((PRIORITY) < 0x10) + +#define IS_NVIC_DEVICE_IRQ(IRQ) ((IRQ) >= 0x00) + +#define IS_SYSTICK_CLK_SOURCE(SOURCE) (((SOURCE) == SYSTICK_CLKSOURCE_HCLK) || \ + ((SOURCE) == SYSTICK_CLKSOURCE_HCLK_DIV8)) + +#if (__MPU_PRESENT == 1) +#define IS_MPU_REGION_ENABLE(STATE) (((STATE) == MPU_REGION_ENABLE) || \ + ((STATE) == MPU_REGION_DISABLE)) + +#define IS_MPU_INSTRUCTION_ACCESS(STATE) (((STATE) == MPU_INSTRUCTION_ACCESS_ENABLE) || \ + ((STATE) == MPU_INSTRUCTION_ACCESS_DISABLE)) + +#define IS_MPU_ACCESS_SHAREABLE(STATE) (((STATE) == MPU_ACCESS_SHAREABLE) || \ + ((STATE) == MPU_ACCESS_NOT_SHAREABLE)) + +#define IS_MPU_ACCESS_CACHEABLE(STATE) (((STATE) == MPU_ACCESS_CACHEABLE) || \ + ((STATE) == MPU_ACCESS_NOT_CACHEABLE)) + +#define IS_MPU_ACCESS_BUFFERABLE(STATE) (((STATE) == MPU_ACCESS_BUFFERABLE) || \ + ((STATE) == MPU_ACCESS_NOT_BUFFERABLE)) + +#define IS_MPU_TEX_LEVEL(TYPE) (((TYPE) == MPU_TEX_LEVEL0) || \ + ((TYPE) == MPU_TEX_LEVEL1) || \ + ((TYPE) == MPU_TEX_LEVEL2) || \ + ((TYPE) == MPU_TEX_LEVEL4)) + +#define IS_MPU_REGION_PERMISSION_ATTRIBUTE(TYPE) (((TYPE) == MPU_REGION_NO_ACCESS) || \ + ((TYPE) == MPU_REGION_PRIV_RW) || \ + ((TYPE) == MPU_REGION_PRIV_RW_URO) || \ + ((TYPE) == MPU_REGION_FULL_ACCESS) || \ + ((TYPE) == MPU_REGION_PRIV_RO) || \ + ((TYPE) == MPU_REGION_PRIV_RO_URO)) + +#define IS_MPU_REGION_NUMBER(NUMBER) (((NUMBER) == MPU_REGION_NUMBER0) || \ + ((NUMBER) == MPU_REGION_NUMBER1) || \ + ((NUMBER) == MPU_REGION_NUMBER2) || \ + ((NUMBER) == MPU_REGION_NUMBER3) || \ + ((NUMBER) == MPU_REGION_NUMBER4) || \ + ((NUMBER) == MPU_REGION_NUMBER5) || \ + ((NUMBER) == MPU_REGION_NUMBER6) || \ + ((NUMBER) == MPU_REGION_NUMBER7)) + +#define IS_MPU_REGION_SIZE(SIZE) (((SIZE) == MPU_REGION_SIZE_32B) || \ + ((SIZE) == MPU_REGION_SIZE_64B) || \ + ((SIZE) == MPU_REGION_SIZE_128B) || \ + ((SIZE) == MPU_REGION_SIZE_256B) || \ + ((SIZE) == MPU_REGION_SIZE_512B) || \ + ((SIZE) == MPU_REGION_SIZE_1KB) || \ + ((SIZE) == MPU_REGION_SIZE_2KB) || \ + ((SIZE) == MPU_REGION_SIZE_4KB) || \ + ((SIZE) == MPU_REGION_SIZE_8KB) || \ + ((SIZE) == MPU_REGION_SIZE_16KB) || \ + ((SIZE) == MPU_REGION_SIZE_32KB) || \ + ((SIZE) == MPU_REGION_SIZE_64KB) || \ + ((SIZE) == MPU_REGION_SIZE_128KB) || \ + ((SIZE) == MPU_REGION_SIZE_256KB) || \ + ((SIZE) == MPU_REGION_SIZE_512KB) || \ + ((SIZE) == MPU_REGION_SIZE_1MB) || \ + ((SIZE) == MPU_REGION_SIZE_2MB) || \ + ((SIZE) == MPU_REGION_SIZE_4MB) || \ + ((SIZE) == MPU_REGION_SIZE_8MB) || \ + ((SIZE) == MPU_REGION_SIZE_16MB) || \ + ((SIZE) == MPU_REGION_SIZE_32MB) || \ + ((SIZE) == MPU_REGION_SIZE_64MB) || \ + ((SIZE) == MPU_REGION_SIZE_128MB) || \ + ((SIZE) == MPU_REGION_SIZE_256MB) || \ + ((SIZE) == MPU_REGION_SIZE_512MB) || \ + ((SIZE) == MPU_REGION_SIZE_1GB) || \ + ((SIZE) == MPU_REGION_SIZE_2GB) || \ + ((SIZE) == MPU_REGION_SIZE_4GB)) + +#define IS_MPU_SUB_REGION_DISABLE(SUBREGION) ((SUBREGION) < (uint16_t)0x00FF) +#endif /* __MPU_PRESENT */ + +/** + * @} + */ + +/* Private functions ---------------------------------------------------------*/ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32L4xx_HAL_CORTEX_H */ + + diff --git a/CablePositioning_IAP_V1.0/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_def.h b/CablePositioning_IAP_V1.0/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_def.h index 1c7e5a7..82bf21e 100644 --- a/CablePositioning_IAP_V1.0/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_def.h +++ b/CablePositioning_IAP_V1.0/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_def.h @@ -1,209 +1,211 @@ -/** - ****************************************************************************** - * @file stm32l4xx_hal_def.h - * @author MCD Application Team - * @brief This file contains HAL common defines, enumeration, macros and - * structures definitions. - ****************************************************************************** - * @attention - * - * Copyright (c) 2017 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef STM32L4xx_HAL_DEF_H -#define STM32L4xx_HAL_DEF_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32l4xx.h" -#include "Legacy/stm32_hal_legacy.h" /* Aliases file for old names compatibility */ -#include - -/* Exported types ------------------------------------------------------------*/ - -/** - * @brief HAL Status structures definition - */ -typedef enum -{ - HAL_OK = 0x00, - HAL_ERROR = 0x01, - HAL_BUSY = 0x02, - HAL_TIMEOUT = 0x03 -} HAL_StatusTypeDef; - -/** - * @brief HAL Lock structures definition - */ -typedef enum -{ - HAL_UNLOCKED = 0x00, - HAL_LOCKED = 0x01 -} HAL_LockTypeDef; - -/* Exported macros -----------------------------------------------------------*/ - -#define UNUSED(X) (void)X /* To avoid gcc/g++ warnings */ - -#define HAL_MAX_DELAY 0xFFFFFFFFU - -#define HAL_IS_BIT_SET(REG, BIT) (((REG) & (BIT)) == (BIT)) -#define HAL_IS_BIT_CLR(REG, BIT) (((REG) & (BIT)) == 0U) - -#define __HAL_LINKDMA(__HANDLE__, __PPP_DMA_FIELD__, __DMA_HANDLE__) \ - do{ \ - (__HANDLE__)->__PPP_DMA_FIELD__ = &(__DMA_HANDLE__); \ - (__DMA_HANDLE__).Parent = (__HANDLE__); \ - } while(0) - -/** @brief Reset the Handle's State field. - * @param __HANDLE__: specifies the Peripheral Handle. - * @note This macro can be used for the following purpose: - * - When the Handle is declared as local variable; before passing it as parameter - * to HAL_PPP_Init() for the first time, it is mandatory to use this macro - * to set to 0 the Handle's "State" field. - * Otherwise, "State" field may have any random value and the first time the function - * HAL_PPP_Init() is called, the low level hardware initialization will be missed - * (i.e. HAL_PPP_MspInit() will not be executed). - * - When there is a need to reconfigure the low level hardware: instead of calling - * HAL_PPP_DeInit() then HAL_PPP_Init(), user can make a call to this macro then HAL_PPP_Init(). - * In this later function, when the Handle's "State" field is set to 0, it will execute the function - * HAL_PPP_MspInit() which will reconfigure the low level hardware. - * @retval None - */ -#define __HAL_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = 0) - -#if (USE_RTOS == 1) - /* Reserved for future use */ - #error " USE_RTOS should be 0 in the current HAL release " -#else - #define __HAL_LOCK(__HANDLE__) \ - do{ \ - if((__HANDLE__)->Lock == HAL_LOCKED) \ - { \ - return HAL_BUSY; \ - } \ - else \ - { \ - (__HANDLE__)->Lock = HAL_LOCKED; \ - } \ - }while (0) - - #define __HAL_UNLOCK(__HANDLE__) \ - do{ \ - (__HANDLE__)->Lock = HAL_UNLOCKED; \ - }while (0) -#endif /* USE_RTOS */ - - -#if defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) /* ARM Compiler V6 */ - #ifndef __weak - #define __weak __attribute__((weak)) - #endif - #ifndef __packed - #define __packed __attribute__((packed)) - #endif -#elif defined ( __GNUC__ ) && !defined (__CC_ARM) /* GNU Compiler */ - #ifndef __weak - #define __weak __attribute__((weak)) - #endif /* __weak */ - #ifndef __packed - #define __packed __attribute__((__packed__)) - #endif /* __packed */ -#endif /* __GNUC__ */ - - -/* Macro to get variable aligned on 4-bytes, for __ICCARM__ the directive "#pragma data_alignment=4" must be used instead */ -#if defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) /* ARM Compiler V6 */ - #ifndef __ALIGN_BEGIN - #define __ALIGN_BEGIN - #endif - #ifndef __ALIGN_END - #define __ALIGN_END __attribute__ ((aligned (4))) - #endif -#elif defined ( __GNUC__ ) && !defined (__CC_ARM) /* GNU Compiler */ - #ifndef __ALIGN_END - #define __ALIGN_END __attribute__ ((aligned (4))) - #endif /* __ALIGN_END */ - #ifndef __ALIGN_BEGIN - #define __ALIGN_BEGIN - #endif /* __ALIGN_BEGIN */ -#else - #ifndef __ALIGN_END - #define __ALIGN_END - #endif /* __ALIGN_END */ - #ifndef __ALIGN_BEGIN - #if defined (__CC_ARM) /* ARM Compiler V5 */ - #define __ALIGN_BEGIN __align(4) - #elif defined (__ICCARM__) /* IAR Compiler */ - #define __ALIGN_BEGIN - #endif /* __CC_ARM */ - #endif /* __ALIGN_BEGIN */ -#endif /* __GNUC__ */ - -/** - * @brief __RAM_FUNC definition - */ -#if defined ( __CC_ARM ) || (defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)) -/* ARM Compiler V4/V5 and V6 - -------------------------- - RAM functions are defined using the toolchain options. - Functions that are executed in RAM should reside in a separate source module. - Using the 'Options for File' dialog you can simply change the 'Code / Const' - area of a module to a memory space in physical RAM. - Available memory areas are declared in the 'Target' tab of the 'Options for Target' - dialog. -*/ -#define __RAM_FUNC - -#elif defined ( __ICCARM__ ) -/* ICCARM Compiler - --------------- - RAM functions are defined using a specific toolchain keyword "__ramfunc". -*/ -#define __RAM_FUNC __ramfunc - -#elif defined ( __GNUC__ ) -/* GNU Compiler - ------------ - RAM functions are defined using a specific toolchain attribute - "__attribute__((section(".RamFunc")))". -*/ -#define __RAM_FUNC __attribute__((section(".RamFunc"))) - -#endif - -/** - * @brief __NOINLINE definition - */ -#if defined ( __CC_ARM ) || (defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)) || defined ( __GNUC__ ) -/* ARM V4/V5 and V6 & GNU Compiler - ------------------------------- -*/ -#define __NOINLINE __attribute__ ( (noinline) ) - -#elif defined ( __ICCARM__ ) -/* ICCARM Compiler - --------------- -*/ -#define __NOINLINE _Pragma("optimize = no_inline") - -#endif - - -#ifdef __cplusplus -} -#endif - -#endif /* STM32L4xx_HAL_DEF_H */ +/** + ****************************************************************************** + * @file stm32l4xx_hal_def.h + * @author MCD Application Team + * @brief This file contains HAL common defines, enumeration, macros and + * structures definitions. + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32L4xx_HAL_DEF_H +#define STM32L4xx_HAL_DEF_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l4xx.h" +#include "Legacy/stm32_hal_legacy.h" /* Aliases file for old names compatibility */ +#include + +/* Exported types ------------------------------------------------------------*/ + +/** + * @brief HAL Status structures definition + */ +typedef enum +{ + HAL_OK = 0x00, + HAL_ERROR = 0x01, + HAL_BUSY = 0x02, + HAL_TIMEOUT = 0x03 +} HAL_StatusTypeDef; + +/** + * @brief HAL Lock structures definition + */ +typedef enum +{ + HAL_UNLOCKED = 0x00, + HAL_LOCKED = 0x01 +} HAL_LockTypeDef; + +/* Exported macros -----------------------------------------------------------*/ + +#if !defined(UNUSED) +#define UNUSED(X) (void)X /* To avoid gcc/g++ warnings */ +#endif /* UNUSED */ + +#define HAL_MAX_DELAY 0xFFFFFFFFU + +#define HAL_IS_BIT_SET(REG, BIT) (((REG) & (BIT)) == (BIT)) +#define HAL_IS_BIT_CLR(REG, BIT) (((REG) & (BIT)) == 0U) + +#define __HAL_LINKDMA(__HANDLE__, __PPP_DMA_FIELD__, __DMA_HANDLE__) \ + do{ \ + (__HANDLE__)->__PPP_DMA_FIELD__ = &(__DMA_HANDLE__); \ + (__DMA_HANDLE__).Parent = (__HANDLE__); \ + } while(0) + +/** @brief Reset the Handle's State field. + * @param __HANDLE__: specifies the Peripheral Handle. + * @note This macro can be used for the following purpose: + * - When the Handle is declared as local variable; before passing it as parameter + * to HAL_PPP_Init() for the first time, it is mandatory to use this macro + * to set to 0 the Handle's "State" field. + * Otherwise, "State" field may have any random value and the first time the function + * HAL_PPP_Init() is called, the low level hardware initialization will be missed + * (i.e. HAL_PPP_MspInit() will not be executed). + * - When there is a need to reconfigure the low level hardware: instead of calling + * HAL_PPP_DeInit() then HAL_PPP_Init(), user can make a call to this macro then HAL_PPP_Init(). + * In this later function, when the Handle's "State" field is set to 0, it will execute the function + * HAL_PPP_MspInit() which will reconfigure the low level hardware. + * @retval None + */ +#define __HAL_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = 0) + +#if (USE_RTOS == 1) + /* Reserved for future use */ + #error " USE_RTOS should be 0 in the current HAL release " +#else + #define __HAL_LOCK(__HANDLE__) \ + do{ \ + if((__HANDLE__)->Lock == HAL_LOCKED) \ + { \ + return HAL_BUSY; \ + } \ + else \ + { \ + (__HANDLE__)->Lock = HAL_LOCKED; \ + } \ + }while (0) + + #define __HAL_UNLOCK(__HANDLE__) \ + do{ \ + (__HANDLE__)->Lock = HAL_UNLOCKED; \ + }while (0) +#endif /* USE_RTOS */ + + +#if defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) /* ARM Compiler V6 */ + #ifndef __weak + #define __weak __attribute__((weak)) + #endif + #ifndef __packed + #define __packed __attribute__((packed)) + #endif +#elif defined ( __GNUC__ ) && !defined (__CC_ARM) /* GNU Compiler */ + #ifndef __weak + #define __weak __attribute__((weak)) + #endif /* __weak */ + #ifndef __packed + #define __packed __attribute__((__packed__)) + #endif /* __packed */ +#endif /* __GNUC__ */ + + +/* Macro to get variable aligned on 4-bytes, for __ICCARM__ the directive "#pragma data_alignment=4" must be used instead */ +#if defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) /* ARM Compiler V6 */ + #ifndef __ALIGN_BEGIN + #define __ALIGN_BEGIN + #endif + #ifndef __ALIGN_END + #define __ALIGN_END __attribute__ ((aligned (4))) + #endif +#elif defined ( __GNUC__ ) && !defined (__CC_ARM) /* GNU Compiler */ + #ifndef __ALIGN_END + #define __ALIGN_END __attribute__ ((aligned (4))) + #endif /* __ALIGN_END */ + #ifndef __ALIGN_BEGIN + #define __ALIGN_BEGIN + #endif /* __ALIGN_BEGIN */ +#else + #ifndef __ALIGN_END + #define __ALIGN_END + #endif /* __ALIGN_END */ + #ifndef __ALIGN_BEGIN + #if defined (__CC_ARM) /* ARM Compiler V5 */ + #define __ALIGN_BEGIN __align(4) + #elif defined (__ICCARM__) /* IAR Compiler */ + #define __ALIGN_BEGIN + #endif /* __CC_ARM */ + #endif /* __ALIGN_BEGIN */ +#endif /* __GNUC__ */ + +/** + * @brief __RAM_FUNC definition + */ +#if defined ( __CC_ARM ) || (defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)) +/* ARM Compiler V4/V5 and V6 + -------------------------- + RAM functions are defined using the toolchain options. + Functions that are executed in RAM should reside in a separate source module. + Using the 'Options for File' dialog you can simply change the 'Code / Const' + area of a module to a memory space in physical RAM. + Available memory areas are declared in the 'Target' tab of the 'Options for Target' + dialog. +*/ +#define __RAM_FUNC + +#elif defined ( __ICCARM__ ) +/* ICCARM Compiler + --------------- + RAM functions are defined using a specific toolchain keyword "__ramfunc". +*/ +#define __RAM_FUNC __ramfunc + +#elif defined ( __GNUC__ ) +/* GNU Compiler + ------------ + RAM functions are defined using a specific toolchain attribute + "__attribute__((section(".RamFunc")))". +*/ +#define __RAM_FUNC __attribute__((section(".RamFunc"))) + +#endif + +/** + * @brief __NOINLINE definition + */ +#if defined ( __CC_ARM ) || (defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)) || defined ( __GNUC__ ) +/* ARM V4/V5 and V6 & GNU Compiler + ------------------------------- +*/ +#define __NOINLINE __attribute__ ( (noinline) ) + +#elif defined ( __ICCARM__ ) +/* ICCARM Compiler + --------------- +*/ +#define __NOINLINE _Pragma("optimize = no_inline") + +#endif + + +#ifdef __cplusplus +} +#endif + +#endif /* STM32L4xx_HAL_DEF_H */ diff --git a/CablePositioning_IAP_V1.0/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_dma.h b/CablePositioning_IAP_V1.0/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_dma.h index f1bba85..586567d 100644 --- a/CablePositioning_IAP_V1.0/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_dma.h +++ b/CablePositioning_IAP_V1.0/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_dma.h @@ -1,861 +1,861 @@ -/** - ****************************************************************************** - * @file stm32l4xx_hal_dma.h - * @author MCD Application Team - * @brief Header file of DMA HAL module. - ****************************************************************************** - * @attention - * - * Copyright (c) 2017 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef STM32L4xx_HAL_DMA_H -#define STM32L4xx_HAL_DMA_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32l4xx_hal_def.h" - -/** @addtogroup STM32L4xx_HAL_Driver - * @{ - */ - -/** @addtogroup DMA - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ -/** @defgroup DMA_Exported_Types DMA Exported Types - * @{ - */ - -/** - * @brief DMA Configuration Structure definition - */ -typedef struct -{ - uint32_t Request; /*!< Specifies the request selected for the specified channel. - This parameter can be a value of @ref DMA_request */ - - uint32_t Direction; /*!< Specifies if the data will be transferred from memory to peripheral, - from memory to memory or from peripheral to memory. - This parameter can be a value of @ref DMA_Data_transfer_direction */ - - uint32_t PeriphInc; /*!< Specifies whether the Peripheral address register should be incremented or not. - This parameter can be a value of @ref DMA_Peripheral_incremented_mode */ - - uint32_t MemInc; /*!< Specifies whether the memory address register should be incremented or not. - This parameter can be a value of @ref DMA_Memory_incremented_mode */ - - uint32_t PeriphDataAlignment; /*!< Specifies the Peripheral data width. - This parameter can be a value of @ref DMA_Peripheral_data_size */ - - uint32_t MemDataAlignment; /*!< Specifies the Memory data width. - This parameter can be a value of @ref DMA_Memory_data_size */ - - uint32_t Mode; /*!< Specifies the operation mode of the DMAy Channelx. - This parameter can be a value of @ref DMA_mode - @note The circular buffer mode cannot be used if the memory-to-memory - data transfer is configured on the selected Channel */ - - uint32_t Priority; /*!< Specifies the software priority for the DMAy Channelx. - This parameter can be a value of @ref DMA_Priority_level */ -} DMA_InitTypeDef; - -/** - * @brief HAL DMA State structures definition - */ -typedef enum -{ - HAL_DMA_STATE_RESET = 0x00U, /*!< DMA not yet initialized or disabled */ - HAL_DMA_STATE_READY = 0x01U, /*!< DMA initialized and ready for use */ - HAL_DMA_STATE_BUSY = 0x02U, /*!< DMA process is ongoing */ - HAL_DMA_STATE_TIMEOUT = 0x03U, /*!< DMA timeout state */ -}HAL_DMA_StateTypeDef; - -/** - * @brief HAL DMA Error Code structure definition - */ -typedef enum -{ - HAL_DMA_FULL_TRANSFER = 0x00U, /*!< Full transfer */ - HAL_DMA_HALF_TRANSFER = 0x01U /*!< Half Transfer */ -}HAL_DMA_LevelCompleteTypeDef; - - -/** - * @brief HAL DMA Callback ID structure definition - */ -typedef enum -{ - HAL_DMA_XFER_CPLT_CB_ID = 0x00U, /*!< Full transfer */ - HAL_DMA_XFER_HALFCPLT_CB_ID = 0x01U, /*!< Half transfer */ - HAL_DMA_XFER_ERROR_CB_ID = 0x02U, /*!< Error */ - HAL_DMA_XFER_ABORT_CB_ID = 0x03U, /*!< Abort */ - HAL_DMA_XFER_ALL_CB_ID = 0x04U /*!< All */ -}HAL_DMA_CallbackIDTypeDef; - -/** - * @brief DMA handle Structure definition - */ -typedef struct __DMA_HandleTypeDef -{ - DMA_Channel_TypeDef *Instance; /*!< Register base address */ - - DMA_InitTypeDef Init; /*!< DMA communication parameters */ - - HAL_LockTypeDef Lock; /*!< DMA locking object */ - - __IO HAL_DMA_StateTypeDef State; /*!< DMA transfer state */ - - void *Parent; /*!< Parent object state */ - - void (* XferCpltCallback)(struct __DMA_HandleTypeDef * hdma); /*!< DMA transfer complete callback */ - - void (* XferHalfCpltCallback)(struct __DMA_HandleTypeDef * hdma); /*!< DMA Half transfer complete callback */ - - void (* XferErrorCallback)(struct __DMA_HandleTypeDef * hdma); /*!< DMA transfer error callback */ - - void (* XferAbortCallback)(struct __DMA_HandleTypeDef * hdma); /*!< DMA transfer abort callback */ - - __IO uint32_t ErrorCode; /*!< DMA Error code */ - - DMA_TypeDef *DmaBaseAddress; /*!< DMA Channel Base Address */ - - uint32_t ChannelIndex; /*!< DMA Channel Index */ - -#if defined(DMAMUX1) - DMAMUX_Channel_TypeDef *DMAmuxChannel; /*!< Register base address */ - - DMAMUX_ChannelStatus_TypeDef *DMAmuxChannelStatus; /*!< DMAMUX Channels Status Base Address */ - - uint32_t DMAmuxChannelStatusMask; /*!< DMAMUX Channel Status Mask */ - - DMAMUX_RequestGen_TypeDef *DMAmuxRequestGen; /*!< DMAMUX request generator Base Address */ - - DMAMUX_RequestGenStatus_TypeDef *DMAmuxRequestGenStatus; /*!< DMAMUX request generator Address */ - - uint32_t DMAmuxRequestGenStatusMask; /*!< DMAMUX request generator Status mask */ - -#endif /* DMAMUX1 */ - -}DMA_HandleTypeDef; -/** - * @} - */ - -/* Exported constants --------------------------------------------------------*/ - -/** @defgroup DMA_Exported_Constants DMA Exported Constants - * @{ - */ - -/** @defgroup DMA_Error_Code DMA Error Code - * @{ - */ -#define HAL_DMA_ERROR_NONE 0x00000000U /*!< No error */ -#define HAL_DMA_ERROR_TE 0x00000001U /*!< Transfer error */ -#define HAL_DMA_ERROR_NO_XFER 0x00000004U /*!< Abort requested with no Xfer ongoing */ -#define HAL_DMA_ERROR_TIMEOUT 0x00000020U /*!< Timeout error */ -#define HAL_DMA_ERROR_NOT_SUPPORTED 0x00000100U /*!< Not supported mode */ -#define HAL_DMA_ERROR_SYNC 0x00000200U /*!< DMAMUX sync overrun error */ -#define HAL_DMA_ERROR_REQGEN 0x00000400U /*!< DMAMUX request generator overrun error */ - -/** - * @} - */ - -/** @defgroup DMA_request DMA request - * @{ - */ -#if !defined (DMAMUX1) - -#define DMA_REQUEST_0 0U -#define DMA_REQUEST_1 1U -#define DMA_REQUEST_2 2U -#define DMA_REQUEST_3 3U -#define DMA_REQUEST_4 4U -#define DMA_REQUEST_5 5U -#define DMA_REQUEST_6 6U -#define DMA_REQUEST_7 7U - -#endif - -#if defined(DMAMUX1) - -#define DMA_REQUEST_MEM2MEM 0U /*!< memory to memory transfer */ - -#define DMA_REQUEST_GENERATOR0 1U /*!< DMAMUX1 request generator 0 */ -#define DMA_REQUEST_GENERATOR1 2U /*!< DMAMUX1 request generator 1 */ -#define DMA_REQUEST_GENERATOR2 3U /*!< DMAMUX1 request generator 2 */ -#define DMA_REQUEST_GENERATOR3 4U /*!< DMAMUX1 request generator 3 */ - -#define DMA_REQUEST_ADC1 5U /*!< DMAMUX1 ADC1 request */ - -#if defined (STM32L4P5xx) || defined (STM32L4Q5xx) - -#define DMA_REQUEST_ADC2 6U /*!< DMAMUX1 ADC1 request */ - -#define DMA_REQUEST_DAC1_CH1 7U /*!< DMAMUX1 DAC1 CH1 request */ -#define DMA_REQUEST_DAC1_CH2 8U /*!< DMAMUX1 DAC1 CH2 request */ - -#define DMA_REQUEST_TIM6_UP 9U /*!< DMAMUX1 TIM6 UP request */ -#define DMA_REQUEST_TIM7_UP 10U /*!< DMAMUX1 TIM7 UP request */ - -#define DMA_REQUEST_SPI1_RX 11U /*!< DMAMUX1 SPI1 RX request */ -#define DMA_REQUEST_SPI1_TX 12U /*!< DMAMUX1 SPI1 TX request */ -#define DMA_REQUEST_SPI2_RX 13U /*!< DMAMUX1 SPI2 RX request */ -#define DMA_REQUEST_SPI2_TX 14U /*!< DMAMUX1 SPI2 TX request */ -#define DMA_REQUEST_SPI3_RX 15U /*!< DMAMUX1 SPI3 RX request */ -#define DMA_REQUEST_SPI3_TX 16U /*!< DMAMUX1 SPI3 TX request */ - -#define DMA_REQUEST_I2C1_RX 17U /*!< DMAMUX1 I2C1 RX request */ -#define DMA_REQUEST_I2C1_TX 18U /*!< DMAMUX1 I2C1 TX request */ -#define DMA_REQUEST_I2C2_RX 19U /*!< DMAMUX1 I2C2 RX request */ -#define DMA_REQUEST_I2C2_TX 20U /*!< DMAMUX1 I2C2 TX request */ -#define DMA_REQUEST_I2C3_RX 21U /*!< DMAMUX1 I2C3 RX request */ -#define DMA_REQUEST_I2C3_TX 22U /*!< DMAMUX1 I2C3 TX request */ -#define DMA_REQUEST_I2C4_RX 23U /*!< DMAMUX1 I2C4 RX request */ -#define DMA_REQUEST_I2C4_TX 24U /*!< DMAMUX1 I2C4 TX request */ - -#define DMA_REQUEST_USART1_RX 25U /*!< DMAMUX1 USART1 RX request */ -#define DMA_REQUEST_USART1_TX 26U /*!< DMAMUX1 USART1 TX request */ -#define DMA_REQUEST_USART2_RX 27U /*!< DMAMUX1 USART2 RX request */ -#define DMA_REQUEST_USART2_TX 28U /*!< DMAMUX1 USART2 TX request */ -#define DMA_REQUEST_USART3_RX 29U /*!< DMAMUX1 USART3 RX request */ -#define DMA_REQUEST_USART3_TX 30U /*!< DMAMUX1 USART3 TX request */ - -#define DMA_REQUEST_UART4_RX 31U /*!< DMAMUX1 UART4 RX request */ -#define DMA_REQUEST_UART4_TX 32U /*!< DMAMUX1 UART4 TX request */ -#define DMA_REQUEST_UART5_RX 33U /*!< DMAMUX1 UART5 RX request */ -#define DMA_REQUEST_UART5_TX 34U /*!< DMAMUX1 UART5 TX request */ - -#define DMA_REQUEST_LPUART1_RX 35U /*!< DMAMUX1 LP_UART1_RX request */ -#define DMA_REQUEST_LPUART1_TX 36U /*!< DMAMUX1 LP_UART1_RX request */ - -#define DMA_REQUEST_SAI1_A 37U /*!< DMAMUX1 SAI1 A request */ -#define DMA_REQUEST_SAI1_B 38U /*!< DMAMUX1 SAI1 B request */ -#define DMA_REQUEST_SAI2_A 39U /*!< DMAMUX1 SAI2 A request */ -#define DMA_REQUEST_SAI2_B 40U /*!< DMAMUX1 SAI2 B request */ - -#define DMA_REQUEST_OCTOSPI1 41U /*!< DMAMUX1 OCTOSPI1 request */ -#define DMA_REQUEST_OCTOSPI2 42U /*!< DMAMUX1 OCTOSPI2 request */ - -#define DMA_REQUEST_TIM1_CH1 43U /*!< DMAMUX1 TIM1 CH1 request */ -#define DMA_REQUEST_TIM1_CH2 44U /*!< DMAMUX1 TIM1 CH2 request */ -#define DMA_REQUEST_TIM1_CH3 45U /*!< DMAMUX1 TIM1 CH3 request */ -#define DMA_REQUEST_TIM1_CH4 46U /*!< DMAMUX1 TIM1 CH4 request */ -#define DMA_REQUEST_TIM1_UP 47U /*!< DMAMUX1 TIM1 UP request */ -#define DMA_REQUEST_TIM1_TRIG 48U /*!< DMAMUX1 TIM1 TRIG request */ -#define DMA_REQUEST_TIM1_COM 49U /*!< DMAMUX1 TIM1 COM request */ - -#define DMA_REQUEST_TIM8_CH1 50U /*!< DMAMUX1 TIM8 CH1 request */ -#define DMA_REQUEST_TIM8_CH2 51U /*!< DMAMUX1 TIM8 CH2 request */ -#define DMA_REQUEST_TIM8_CH3 52U /*!< DMAMUX1 TIM8 CH3 request */ -#define DMA_REQUEST_TIM8_CH4 53U /*!< DMAMUX1 TIM8 CH4 request */ -#define DMA_REQUEST_TIM8_UP 54U /*!< DMAMUX1 TIM8 UP request */ -#define DMA_REQUEST_TIM8_TRIG 55U /*!< DMAMUX1 TIM8 TRIG request */ -#define DMA_REQUEST_TIM8_COM 56U /*!< DMAMUX1 TIM8 COM request */ - -#define DMA_REQUEST_TIM2_CH1 57U /*!< DMAMUX1 TIM2 CH1 request */ -#define DMA_REQUEST_TIM2_CH2 58U /*!< DMAMUX1 TIM2 CH2 request */ -#define DMA_REQUEST_TIM2_CH3 59U /*!< DMAMUX1 TIM2 CH3 request */ -#define DMA_REQUEST_TIM2_CH4 60U /*!< DMAMUX1 TIM2 CH4 request */ -#define DMA_REQUEST_TIM2_UP 61U /*!< DMAMUX1 TIM2 UP request */ - -#define DMA_REQUEST_TIM3_CH1 62U /*!< DMAMUX1 TIM3 CH1 request */ -#define DMA_REQUEST_TIM3_CH2 63U /*!< DMAMUX1 TIM3 CH2 request */ -#define DMA_REQUEST_TIM3_CH3 64U /*!< DMAMUX1 TIM3 CH3 request */ -#define DMA_REQUEST_TIM3_CH4 65U /*!< DMAMUX1 TIM3 CH4 request */ -#define DMA_REQUEST_TIM3_UP 66U /*!< DMAMUX1 TIM3 UP request */ -#define DMA_REQUEST_TIM3_TRIG 67U /*!< DMAMUX1 TIM3 TRIG request */ - -#define DMA_REQUEST_TIM4_CH1 68U /*!< DMAMUX1 TIM4 CH1 request */ -#define DMA_REQUEST_TIM4_CH2 69U /*!< DMAMUX1 TIM4 CH2 request */ -#define DMA_REQUEST_TIM4_CH3 70U /*!< DMAMUX1 TIM4 CH3 request */ -#define DMA_REQUEST_TIM4_CH4 71U /*!< DMAMUX1 TIM4 CH4 request */ -#define DMA_REQUEST_TIM4_UP 72U /*!< DMAMUX1 TIM4 UP request */ - -#define DMA_REQUEST_TIM5_CH1 73U /*!< DMAMUX1 TIM5 CH1 request */ -#define DMA_REQUEST_TIM5_CH2 74U /*!< DMAMUX1 TIM5 CH2 request */ -#define DMA_REQUEST_TIM5_CH3 75U /*!< DMAMUX1 TIM5 CH3 request */ -#define DMA_REQUEST_TIM5_CH4 76U /*!< DMAMUX1 TIM5 CH4 request */ -#define DMA_REQUEST_TIM5_UP 77U /*!< DMAMUX1 TIM5 UP request */ -#define DMA_REQUEST_TIM5_TRIG 78U /*!< DMAMUX1 TIM5 TRIG request */ - -#define DMA_REQUEST_TIM15_CH1 79U /*!< DMAMUX1 TIM15 CH1 request */ -#define DMA_REQUEST_TIM15_UP 80U /*!< DMAMUX1 TIM15 UP request */ -#define DMA_REQUEST_TIM15_TRIG 81U /*!< DMAMUX1 TIM15 TRIG request */ -#define DMA_REQUEST_TIM15_COM 82U /*!< DMAMUX1 TIM15 COM request */ - -#define DMA_REQUEST_TIM16_CH1 83U /*!< DMAMUX1 TIM16 CH1 request */ -#define DMA_REQUEST_TIM16_UP 84U /*!< DMAMUX1 TIM16 UP request */ -#define DMA_REQUEST_TIM17_CH1 85U /*!< DMAMUX1 TIM17 CH1 request */ -#define DMA_REQUEST_TIM17_UP 86U /*!< DMAMUX1 TIM17 UP request */ - -#define DMA_REQUEST_DFSDM1_FLT0 87U /*!< DMAMUX1 DFSDM1 Filter0 request */ -#define DMA_REQUEST_DFSDM1_FLT1 88U /*!< DMAMUX1 DFSDM1 Filter1 request */ - -#define DMA_REQUEST_DCMI 91U /*!< DMAMUX1 DCMI request */ -#define DMA_REQUEST_DCMI_PSSI 91U /*!< DMAMUX1 DCMI/PSSI request */ - -#define DMA_REQUEST_AES_IN 92U /*!< DMAMUX1 AES IN request */ -#define DMA_REQUEST_AES_OUT 93U /*!< DMAMUX1 AES OUT request */ - -#define DMA_REQUEST_HASH_IN 94U /*!< DMAMUX1 HASH IN request */ - -#else - -#define DMA_REQUEST_DAC1_CH1 6U /*!< DMAMUX1 DAC1 CH1 request */ -#define DMA_REQUEST_DAC1_CH2 7U /*!< DMAMUX1 DAC1 CH2 request */ - -#define DMA_REQUEST_TIM6_UP 8U /*!< DMAMUX1 TIM6 UP request */ -#define DMA_REQUEST_TIM7_UP 9U /*!< DMAMUX1 TIM7 UP request */ - -#define DMA_REQUEST_SPI1_RX 10U /*!< DMAMUX1 SPI1 RX request */ -#define DMA_REQUEST_SPI1_TX 11U /*!< DMAMUX1 SPI1 TX request */ -#define DMA_REQUEST_SPI2_RX 12U /*!< DMAMUX1 SPI2 RX request */ -#define DMA_REQUEST_SPI2_TX 13U /*!< DMAMUX1 SPI2 TX request */ -#define DMA_REQUEST_SPI3_RX 14U /*!< DMAMUX1 SPI3 RX request */ -#define DMA_REQUEST_SPI3_TX 15U /*!< DMAMUX1 SPI3 TX request */ - -#define DMA_REQUEST_I2C1_RX 16U /*!< DMAMUX1 I2C1 RX request */ -#define DMA_REQUEST_I2C1_TX 17U /*!< DMAMUX1 I2C1 TX request */ -#define DMA_REQUEST_I2C2_RX 18U /*!< DMAMUX1 I2C2 RX request */ -#define DMA_REQUEST_I2C2_TX 19U /*!< DMAMUX1 I2C2 TX request */ -#define DMA_REQUEST_I2C3_RX 20U /*!< DMAMUX1 I2C3 RX request */ -#define DMA_REQUEST_I2C3_TX 21U /*!< DMAMUX1 I2C3 TX request */ -#define DMA_REQUEST_I2C4_RX 22U /*!< DMAMUX1 I2C4 RX request */ -#define DMA_REQUEST_I2C4_TX 23U /*!< DMAMUX1 I2C4 TX request */ - -#define DMA_REQUEST_USART1_RX 24U /*!< DMAMUX1 USART1 RX request */ -#define DMA_REQUEST_USART1_TX 25U /*!< DMAMUX1 USART1 TX request */ -#define DMA_REQUEST_USART2_RX 26U /*!< DMAMUX1 USART2 RX request */ -#define DMA_REQUEST_USART2_TX 27U /*!< DMAMUX1 USART2 TX request */ -#define DMA_REQUEST_USART3_RX 28U /*!< DMAMUX1 USART3 RX request */ -#define DMA_REQUEST_USART3_TX 29U /*!< DMAMUX1 USART3 TX request */ - -#define DMA_REQUEST_UART4_RX 30U /*!< DMAMUX1 UART4 RX request */ -#define DMA_REQUEST_UART4_TX 31U /*!< DMAMUX1 UART4 TX request */ -#define DMA_REQUEST_UART5_RX 32U /*!< DMAMUX1 UART5 RX request */ -#define DMA_REQUEST_UART5_TX 33U /*!< DMAMUX1 UART5 TX request */ - -#define DMA_REQUEST_LPUART1_RX 34U /*!< DMAMUX1 LP_UART1_RX request */ -#define DMA_REQUEST_LPUART1_TX 35U /*!< DMAMUX1 LP_UART1_RX request */ - -#define DMA_REQUEST_SAI1_A 36U /*!< DMAMUX1 SAI1 A request */ -#define DMA_REQUEST_SAI1_B 37U /*!< DMAMUX1 SAI1 B request */ -#define DMA_REQUEST_SAI2_A 38U /*!< DMAMUX1 SAI2 A request */ -#define DMA_REQUEST_SAI2_B 39U /*!< DMAMUX1 SAI2 B request */ - -#define DMA_REQUEST_OCTOSPI1 40U /*!< DMAMUX1 OCTOSPI1 request */ -#define DMA_REQUEST_OCTOSPI2 41U /*!< DMAMUX1 OCTOSPI2 request */ - -#define DMA_REQUEST_TIM1_CH1 42U /*!< DMAMUX1 TIM1 CH1 request */ -#define DMA_REQUEST_TIM1_CH2 43U /*!< DMAMUX1 TIM1 CH2 request */ -#define DMA_REQUEST_TIM1_CH3 44U /*!< DMAMUX1 TIM1 CH3 request */ -#define DMA_REQUEST_TIM1_CH4 45U /*!< DMAMUX1 TIM1 CH4 request */ -#define DMA_REQUEST_TIM1_UP 46U /*!< DMAMUX1 TIM1 UP request */ -#define DMA_REQUEST_TIM1_TRIG 47U /*!< DMAMUX1 TIM1 TRIG request */ -#define DMA_REQUEST_TIM1_COM 48U /*!< DMAMUX1 TIM1 COM request */ - -#define DMA_REQUEST_TIM8_CH1 49U /*!< DMAMUX1 TIM8 CH1 request */ -#define DMA_REQUEST_TIM8_CH2 50U /*!< DMAMUX1 TIM8 CH2 request */ -#define DMA_REQUEST_TIM8_CH3 51U /*!< DMAMUX1 TIM8 CH3 request */ -#define DMA_REQUEST_TIM8_CH4 52U /*!< DMAMUX1 TIM8 CH4 request */ -#define DMA_REQUEST_TIM8_UP 53U /*!< DMAMUX1 TIM8 UP request */ -#define DMA_REQUEST_TIM8_TRIG 54U /*!< DMAMUX1 TIM8 TRIG request */ -#define DMA_REQUEST_TIM8_COM 55U /*!< DMAMUX1 TIM8 COM request */ - -#define DMA_REQUEST_TIM2_CH1 56U /*!< DMAMUX1 TIM2 CH1 request */ -#define DMA_REQUEST_TIM2_CH2 57U /*!< DMAMUX1 TIM2 CH2 request */ -#define DMA_REQUEST_TIM2_CH3 58U /*!< DMAMUX1 TIM2 CH3 request */ -#define DMA_REQUEST_TIM2_CH4 59U /*!< DMAMUX1 TIM2 CH4 request */ -#define DMA_REQUEST_TIM2_UP 60U /*!< DMAMUX1 TIM2 UP request */ - -#define DMA_REQUEST_TIM3_CH1 61U /*!< DMAMUX1 TIM3 CH1 request */ -#define DMA_REQUEST_TIM3_CH2 62U /*!< DMAMUX1 TIM3 CH2 request */ -#define DMA_REQUEST_TIM3_CH3 63U /*!< DMAMUX1 TIM3 CH3 request */ -#define DMA_REQUEST_TIM3_CH4 64U /*!< DMAMUX1 TIM3 CH4 request */ -#define DMA_REQUEST_TIM3_UP 65U /*!< DMAMUX1 TIM3 UP request */ -#define DMA_REQUEST_TIM3_TRIG 66U /*!< DMAMUX1 TIM3 TRIG request */ - -#define DMA_REQUEST_TIM4_CH1 67U /*!< DMAMUX1 TIM4 CH1 request */ -#define DMA_REQUEST_TIM4_CH2 68U /*!< DMAMUX1 TIM4 CH2 request */ -#define DMA_REQUEST_TIM4_CH3 69U /*!< DMAMUX1 TIM4 CH3 request */ -#define DMA_REQUEST_TIM4_CH4 70U /*!< DMAMUX1 TIM4 CH4 request */ -#define DMA_REQUEST_TIM4_UP 71U /*!< DMAMUX1 TIM4 UP request */ - -#define DMA_REQUEST_TIM5_CH1 72U /*!< DMAMUX1 TIM5 CH1 request */ -#define DMA_REQUEST_TIM5_CH2 73U /*!< DMAMUX1 TIM5 CH2 request */ -#define DMA_REQUEST_TIM5_CH3 74U /*!< DMAMUX1 TIM5 CH3 request */ -#define DMA_REQUEST_TIM5_CH4 75U /*!< DMAMUX1 TIM5 CH4 request */ -#define DMA_REQUEST_TIM5_UP 76U /*!< DMAMUX1 TIM5 UP request */ -#define DMA_REQUEST_TIM5_TRIG 77U /*!< DMAMUX1 TIM5 TRIG request */ - -#define DMA_REQUEST_TIM15_CH1 78U /*!< DMAMUX1 TIM15 CH1 request */ -#define DMA_REQUEST_TIM15_UP 79U /*!< DMAMUX1 TIM15 UP request */ -#define DMA_REQUEST_TIM15_TRIG 80U /*!< DMAMUX1 TIM15 TRIG request */ -#define DMA_REQUEST_TIM15_COM 81U /*!< DMAMUX1 TIM15 COM request */ - -#define DMA_REQUEST_TIM16_CH1 82U /*!< DMAMUX1 TIM16 CH1 request */ -#define DMA_REQUEST_TIM16_UP 83U /*!< DMAMUX1 TIM16 UP request */ -#define DMA_REQUEST_TIM17_CH1 84U /*!< DMAMUX1 TIM17 CH1 request */ -#define DMA_REQUEST_TIM17_UP 85U /*!< DMAMUX1 TIM17 UP request */ - -#define DMA_REQUEST_DFSDM1_FLT0 86U /*!< DMAMUX1 DFSDM1 Filter0 request */ -#define DMA_REQUEST_DFSDM1_FLT1 87U /*!< DMAMUX1 DFSDM1 Filter1 request */ -#define DMA_REQUEST_DFSDM1_FLT2 88U /*!< DMAMUX1 DFSDM1 Filter2 request */ -#define DMA_REQUEST_DFSDM1_FLT3 89U /*!< DMAMUX1 DFSDM1 Filter3 request */ - -#define DMA_REQUEST_DCMI 90U /*!< DMAMUX1 DCMI request */ - -#define DMA_REQUEST_AES_IN 91U /*!< DMAMUX1 AES IN request */ -#define DMA_REQUEST_AES_OUT 92U /*!< DMAMUX1 AES OUT request */ - -#define DMA_REQUEST_HASH_IN 93U /*!< DMAMUX1 HASH IN request */ -#endif /* STM32L4P5xx || STM32L4Q5xx */ - -#endif /* DMAMUX1 */ - -/** - * @} - */ - -/** @defgroup DMA_Data_transfer_direction DMA Data transfer direction - * @{ - */ -#define DMA_PERIPH_TO_MEMORY 0x00000000U /*!< Peripheral to memory direction */ -#define DMA_MEMORY_TO_PERIPH DMA_CCR_DIR /*!< Memory to peripheral direction */ -#define DMA_MEMORY_TO_MEMORY DMA_CCR_MEM2MEM /*!< Memory to memory direction */ -/** - * @} - */ - -/** @defgroup DMA_Peripheral_incremented_mode DMA Peripheral incremented mode - * @{ - */ -#define DMA_PINC_ENABLE DMA_CCR_PINC /*!< Peripheral increment mode Enable */ -#define DMA_PINC_DISABLE 0x00000000U /*!< Peripheral increment mode Disable */ -/** - * @} - */ - -/** @defgroup DMA_Memory_incremented_mode DMA Memory incremented mode - * @{ - */ -#define DMA_MINC_ENABLE DMA_CCR_MINC /*!< Memory increment mode Enable */ -#define DMA_MINC_DISABLE 0x00000000U /*!< Memory increment mode Disable */ -/** - * @} - */ - -/** @defgroup DMA_Peripheral_data_size DMA Peripheral data size - * @{ - */ -#define DMA_PDATAALIGN_BYTE 0x00000000U /*!< Peripheral data alignment : Byte */ -#define DMA_PDATAALIGN_HALFWORD DMA_CCR_PSIZE_0 /*!< Peripheral data alignment : HalfWord */ -#define DMA_PDATAALIGN_WORD DMA_CCR_PSIZE_1 /*!< Peripheral data alignment : Word */ -/** - * @} - */ - -/** @defgroup DMA_Memory_data_size DMA Memory data size - * @{ - */ -#define DMA_MDATAALIGN_BYTE 0x00000000U /*!< Memory data alignment : Byte */ -#define DMA_MDATAALIGN_HALFWORD DMA_CCR_MSIZE_0 /*!< Memory data alignment : HalfWord */ -#define DMA_MDATAALIGN_WORD DMA_CCR_MSIZE_1 /*!< Memory data alignment : Word */ -/** - * @} - */ - -/** @defgroup DMA_mode DMA mode - * @{ - */ -#define DMA_NORMAL 0x00000000U /*!< Normal mode */ -#define DMA_CIRCULAR DMA_CCR_CIRC /*!< Circular mode */ -/** - * @} - */ - -/** @defgroup DMA_Priority_level DMA Priority level - * @{ - */ -#define DMA_PRIORITY_LOW 0x00000000U /*!< Priority level : Low */ -#define DMA_PRIORITY_MEDIUM DMA_CCR_PL_0 /*!< Priority level : Medium */ -#define DMA_PRIORITY_HIGH DMA_CCR_PL_1 /*!< Priority level : High */ -#define DMA_PRIORITY_VERY_HIGH DMA_CCR_PL /*!< Priority level : Very_High */ -/** - * @} - */ - - -/** @defgroup DMA_interrupt_enable_definitions DMA interrupt enable definitions - * @{ - */ -#define DMA_IT_TC DMA_CCR_TCIE -#define DMA_IT_HT DMA_CCR_HTIE -#define DMA_IT_TE DMA_CCR_TEIE -/** - * @} - */ - -/** @defgroup DMA_flag_definitions DMA flag definitions - * @{ - */ -#define DMA_FLAG_GL1 DMA_ISR_GIF1 -#define DMA_FLAG_TC1 DMA_ISR_TCIF1 -#define DMA_FLAG_HT1 DMA_ISR_HTIF1 -#define DMA_FLAG_TE1 DMA_ISR_TEIF1 -#define DMA_FLAG_GL2 DMA_ISR_GIF2 -#define DMA_FLAG_TC2 DMA_ISR_TCIF2 -#define DMA_FLAG_HT2 DMA_ISR_HTIF2 -#define DMA_FLAG_TE2 DMA_ISR_TEIF2 -#define DMA_FLAG_GL3 DMA_ISR_GIF3 -#define DMA_FLAG_TC3 DMA_ISR_TCIF3 -#define DMA_FLAG_HT3 DMA_ISR_HTIF3 -#define DMA_FLAG_TE3 DMA_ISR_TEIF3 -#define DMA_FLAG_GL4 DMA_ISR_GIF4 -#define DMA_FLAG_TC4 DMA_ISR_TCIF4 -#define DMA_FLAG_HT4 DMA_ISR_HTIF4 -#define DMA_FLAG_TE4 DMA_ISR_TEIF4 -#define DMA_FLAG_GL5 DMA_ISR_GIF5 -#define DMA_FLAG_TC5 DMA_ISR_TCIF5 -#define DMA_FLAG_HT5 DMA_ISR_HTIF5 -#define DMA_FLAG_TE5 DMA_ISR_TEIF5 -#define DMA_FLAG_GL6 DMA_ISR_GIF6 -#define DMA_FLAG_TC6 DMA_ISR_TCIF6 -#define DMA_FLAG_HT6 DMA_ISR_HTIF6 -#define DMA_FLAG_TE6 DMA_ISR_TEIF6 -#define DMA_FLAG_GL7 DMA_ISR_GIF7 -#define DMA_FLAG_TC7 DMA_ISR_TCIF7 -#define DMA_FLAG_HT7 DMA_ISR_HTIF7 -#define DMA_FLAG_TE7 DMA_ISR_TEIF7 -/** - * @} - */ - -/** - * @} - */ - -/* Exported macros -----------------------------------------------------------*/ -/** @defgroup DMA_Exported_Macros DMA Exported Macros - * @{ - */ - -/** @brief Reset DMA handle state. - * @param __HANDLE__ DMA handle - * @retval None - */ -#define __HAL_DMA_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_DMA_STATE_RESET) - -/** - * @brief Enable the specified DMA Channel. - * @param __HANDLE__ DMA handle - * @retval None - */ -#define __HAL_DMA_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CCR |= DMA_CCR_EN) - -/** - * @brief Disable the specified DMA Channel. - * @param __HANDLE__ DMA handle - * @retval None - */ -#define __HAL_DMA_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CCR &= ~DMA_CCR_EN) - - -/* Interrupt & Flag management */ - -/** - * @brief Return the current DMA Channel transfer complete flag. - * @param __HANDLE__ DMA handle - * @retval The specified transfer complete flag index. - */ - -#define __HAL_DMA_GET_TC_FLAG_INDEX(__HANDLE__) \ -(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_TC1 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel1))? DMA_FLAG_TC1 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_TC2 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel2))? DMA_FLAG_TC2 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_TC3 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel3))? DMA_FLAG_TC3 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_TC4 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel4))? DMA_FLAG_TC4 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_FLAG_TC5 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel5))? DMA_FLAG_TC5 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_TC6 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel6))? DMA_FLAG_TC6 :\ - DMA_FLAG_TC7) - -/** - * @brief Return the current DMA Channel half transfer complete flag. - * @param __HANDLE__ DMA handle - * @retval The specified half transfer complete flag index. - */ -#define __HAL_DMA_GET_HT_FLAG_INDEX(__HANDLE__)\ -(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_HT1 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel1))? DMA_FLAG_HT1 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_HT2 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel2))? DMA_FLAG_HT2 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_HT3 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel3))? DMA_FLAG_HT3 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_HT4 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel4))? DMA_FLAG_HT4 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_FLAG_HT5 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel5))? DMA_FLAG_HT5 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_HT6 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel6))? DMA_FLAG_HT6 :\ - DMA_FLAG_HT7) - -/** - * @brief Return the current DMA Channel transfer error flag. - * @param __HANDLE__ DMA handle - * @retval The specified transfer error flag index. - */ -#define __HAL_DMA_GET_TE_FLAG_INDEX(__HANDLE__)\ -(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_TE1 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel1))? DMA_FLAG_TE1 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_TE2 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel2))? DMA_FLAG_TE2 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_TE3 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel3))? DMA_FLAG_TE3 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_TE4 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel4))? DMA_FLAG_TE4 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_FLAG_TE5 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel5))? DMA_FLAG_TE5 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_TE6 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel6))? DMA_FLAG_TE6 :\ - DMA_FLAG_TE7) - -/** - * @brief Return the current DMA Channel Global interrupt flag. - * @param __HANDLE__ DMA handle - * @retval The specified transfer error flag index. - */ -#define __HAL_DMA_GET_GI_FLAG_INDEX(__HANDLE__)\ -(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_ISR_GIF1 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel1))? DMA_ISR_GIF1 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_ISR_GIF2 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel2))? DMA_ISR_GIF2 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_ISR_GIF3 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel3))? DMA_ISR_GIF3 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_ISR_GIF4 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel4))? DMA_ISR_GIF4 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_ISR_GIF5 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel5))? DMA_ISR_GIF5 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_ISR_GIF6 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel6))? DMA_ISR_GIF6 :\ - DMA_ISR_GIF7) - -/** - * @brief Get the DMA Channel pending flags. - * @param __HANDLE__ DMA handle - * @param __FLAG__ Get the specified flag. - * This parameter can be any combination of the following values: - * @arg DMA_FLAG_TCx: Transfer complete flag - * @arg DMA_FLAG_HTx: Half transfer complete flag - * @arg DMA_FLAG_TEx: Transfer error flag - * @arg DMA_FLAG_GLx: Global interrupt flag - * Where x can be from 1 to 7 to select the DMA Channel x flag. - * @retval The state of FLAG (SET or RESET). - */ -#define __HAL_DMA_GET_FLAG(__HANDLE__, __FLAG__) (((uint32_t)((__HANDLE__)->Instance) > ((uint32_t)DMA1_Channel7))? \ - (DMA2->ISR & (__FLAG__)) : (DMA1->ISR & (__FLAG__))) - -/** - * @brief Clear the DMA Channel pending flags. - * @param __HANDLE__ DMA handle - * @param __FLAG__ specifies the flag to clear. - * This parameter can be any combination of the following values: - * @arg DMA_FLAG_TCx: Transfer complete flag - * @arg DMA_FLAG_HTx: Half transfer complete flag - * @arg DMA_FLAG_TEx: Transfer error flag - * @arg DMA_FLAG_GLx: Global interrupt flag - * Where x can be from 1 to 7 to select the DMA Channel x flag. - * @retval None - */ -#define __HAL_DMA_CLEAR_FLAG(__HANDLE__, __FLAG__) (((uint32_t)((__HANDLE__)->Instance) > ((uint32_t)DMA1_Channel7))? \ - (DMA2->IFCR = (__FLAG__)) : (DMA1->IFCR = (__FLAG__))) - -/** - * @brief Enable the specified DMA Channel interrupts. - * @param __HANDLE__ DMA handle - * @param __INTERRUPT__ specifies the DMA interrupt sources to be enabled or disabled. - * This parameter can be any combination of the following values: - * @arg DMA_IT_TC: Transfer complete interrupt mask - * @arg DMA_IT_HT: Half transfer complete interrupt mask - * @arg DMA_IT_TE: Transfer error interrupt mask - * @retval None - */ -#define __HAL_DMA_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CCR |= (__INTERRUPT__)) - -/** - * @brief Disable the specified DMA Channel interrupts. - * @param __HANDLE__ DMA handle - * @param __INTERRUPT__ specifies the DMA interrupt sources to be enabled or disabled. - * This parameter can be any combination of the following values: - * @arg DMA_IT_TC: Transfer complete interrupt mask - * @arg DMA_IT_HT: Half transfer complete interrupt mask - * @arg DMA_IT_TE: Transfer error interrupt mask - * @retval None - */ -#define __HAL_DMA_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CCR &= ~(__INTERRUPT__)) - -/** - * @brief Check whether the specified DMA Channel interrupt is enabled or not. - * @param __HANDLE__ DMA handle - * @param __INTERRUPT__ specifies the DMA interrupt source to check. - * This parameter can be one of the following values: - * @arg DMA_IT_TC: Transfer complete interrupt mask - * @arg DMA_IT_HT: Half transfer complete interrupt mask - * @arg DMA_IT_TE: Transfer error interrupt mask - * @retval The state of DMA_IT (SET or RESET). - */ -#define __HAL_DMA_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->CCR & (__INTERRUPT__))) - -/** - * @brief Return the number of remaining data units in the current DMA Channel transfer. - * @param __HANDLE__ DMA handle - * @retval The number of remaining data units in the current DMA Channel transfer. - */ -#define __HAL_DMA_GET_COUNTER(__HANDLE__) ((__HANDLE__)->Instance->CNDTR) - -/** - * @} - */ - -#if defined(DMAMUX1) -/* Include DMA HAL Extension module */ -#include "stm32l4xx_hal_dma_ex.h" -#endif /* DMAMUX1 */ - -/* Exported functions --------------------------------------------------------*/ - -/** @addtogroup DMA_Exported_Functions - * @{ - */ - -/** @addtogroup DMA_Exported_Functions_Group1 - * @{ - */ -/* Initialization and de-initialization functions *****************************/ -HAL_StatusTypeDef HAL_DMA_Init(DMA_HandleTypeDef *hdma); -HAL_StatusTypeDef HAL_DMA_DeInit (DMA_HandleTypeDef *hdma); -/** - * @} - */ - -/** @addtogroup DMA_Exported_Functions_Group2 - * @{ - */ -/* IO operation functions *****************************************************/ -HAL_StatusTypeDef HAL_DMA_Start (DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength); -HAL_StatusTypeDef HAL_DMA_Start_IT(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength); -HAL_StatusTypeDef HAL_DMA_Abort(DMA_HandleTypeDef *hdma); -HAL_StatusTypeDef HAL_DMA_Abort_IT(DMA_HandleTypeDef *hdma); -HAL_StatusTypeDef HAL_DMA_PollForTransfer(DMA_HandleTypeDef *hdma, HAL_DMA_LevelCompleteTypeDef CompleteLevel, uint32_t Timeout); -void HAL_DMA_IRQHandler(DMA_HandleTypeDef *hdma); -HAL_StatusTypeDef HAL_DMA_RegisterCallback(DMA_HandleTypeDef *hdma, HAL_DMA_CallbackIDTypeDef CallbackID, void (* pCallback)( DMA_HandleTypeDef * _hdma)); -HAL_StatusTypeDef HAL_DMA_UnRegisterCallback(DMA_HandleTypeDef *hdma, HAL_DMA_CallbackIDTypeDef CallbackID); - -/** - * @} - */ - -/** @addtogroup DMA_Exported_Functions_Group3 - * @{ - */ -/* Peripheral State and Error functions ***************************************/ -HAL_DMA_StateTypeDef HAL_DMA_GetState(DMA_HandleTypeDef *hdma); -uint32_t HAL_DMA_GetError(DMA_HandleTypeDef *hdma); -/** - * @} - */ - -/** - * @} - */ - -/* Private macros ------------------------------------------------------------*/ -/** @defgroup DMA_Private_Macros DMA Private Macros - * @{ - */ - -#define IS_DMA_DIRECTION(DIRECTION) (((DIRECTION) == DMA_PERIPH_TO_MEMORY ) || \ - ((DIRECTION) == DMA_MEMORY_TO_PERIPH) || \ - ((DIRECTION) == DMA_MEMORY_TO_MEMORY)) - -#define IS_DMA_BUFFER_SIZE(SIZE) (((SIZE) >= 0x1U) && ((SIZE) < 0x10000U)) - -#define IS_DMA_PERIPHERAL_INC_STATE(STATE) (((STATE) == DMA_PINC_ENABLE) || \ - ((STATE) == DMA_PINC_DISABLE)) - -#define IS_DMA_MEMORY_INC_STATE(STATE) (((STATE) == DMA_MINC_ENABLE) || \ - ((STATE) == DMA_MINC_DISABLE)) - -#if !defined (DMAMUX1) - -#define IS_DMA_ALL_REQUEST(REQUEST) (((REQUEST) == DMA_REQUEST_0) || \ - ((REQUEST) == DMA_REQUEST_1) || \ - ((REQUEST) == DMA_REQUEST_2) || \ - ((REQUEST) == DMA_REQUEST_3) || \ - ((REQUEST) == DMA_REQUEST_4) || \ - ((REQUEST) == DMA_REQUEST_5) || \ - ((REQUEST) == DMA_REQUEST_6) || \ - ((REQUEST) == DMA_REQUEST_7)) -#endif - -#if defined(DMAMUX1) - -#define IS_DMA_ALL_REQUEST(REQUEST)((REQUEST) <= DMA_REQUEST_HASH_IN) - -#endif /* DMAMUX1 */ - -#define IS_DMA_PERIPHERAL_DATA_SIZE(SIZE) (((SIZE) == DMA_PDATAALIGN_BYTE) || \ - ((SIZE) == DMA_PDATAALIGN_HALFWORD) || \ - ((SIZE) == DMA_PDATAALIGN_WORD)) - -#define IS_DMA_MEMORY_DATA_SIZE(SIZE) (((SIZE) == DMA_MDATAALIGN_BYTE) || \ - ((SIZE) == DMA_MDATAALIGN_HALFWORD) || \ - ((SIZE) == DMA_MDATAALIGN_WORD )) - -#define IS_DMA_MODE(MODE) (((MODE) == DMA_NORMAL ) || \ - ((MODE) == DMA_CIRCULAR)) - -#define IS_DMA_PRIORITY(PRIORITY) (((PRIORITY) == DMA_PRIORITY_LOW ) || \ - ((PRIORITY) == DMA_PRIORITY_MEDIUM) || \ - ((PRIORITY) == DMA_PRIORITY_HIGH) || \ - ((PRIORITY) == DMA_PRIORITY_VERY_HIGH)) - -/** - * @} - */ - -/* Private functions ---------------------------------------------------------*/ - -/** - * @} - */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /* STM32L4xx_HAL_DMA_H */ +/** + ****************************************************************************** + * @file stm32l4xx_hal_dma.h + * @author MCD Application Team + * @brief Header file of DMA HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32L4xx_HAL_DMA_H +#define STM32L4xx_HAL_DMA_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l4xx_hal_def.h" + +/** @addtogroup STM32L4xx_HAL_Driver + * @{ + */ + +/** @addtogroup DMA + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup DMA_Exported_Types DMA Exported Types + * @{ + */ + +/** + * @brief DMA Configuration Structure definition + */ +typedef struct +{ + uint32_t Request; /*!< Specifies the request selected for the specified channel. + This parameter can be a value of @ref DMA_request */ + + uint32_t Direction; /*!< Specifies if the data will be transferred from memory to peripheral, + from memory to memory or from peripheral to memory. + This parameter can be a value of @ref DMA_Data_transfer_direction */ + + uint32_t PeriphInc; /*!< Specifies whether the Peripheral address register should be incremented or not. + This parameter can be a value of @ref DMA_Peripheral_incremented_mode */ + + uint32_t MemInc; /*!< Specifies whether the memory address register should be incremented or not. + This parameter can be a value of @ref DMA_Memory_incremented_mode */ + + uint32_t PeriphDataAlignment; /*!< Specifies the Peripheral data width. + This parameter can be a value of @ref DMA_Peripheral_data_size */ + + uint32_t MemDataAlignment; /*!< Specifies the Memory data width. + This parameter can be a value of @ref DMA_Memory_data_size */ + + uint32_t Mode; /*!< Specifies the operation mode of the DMAy Channelx. + This parameter can be a value of @ref DMA_mode + @note The circular buffer mode cannot be used if the memory-to-memory + data transfer is configured on the selected Channel */ + + uint32_t Priority; /*!< Specifies the software priority for the DMAy Channelx. + This parameter can be a value of @ref DMA_Priority_level */ +} DMA_InitTypeDef; + +/** + * @brief HAL DMA State structures definition + */ +typedef enum +{ + HAL_DMA_STATE_RESET = 0x00U, /*!< DMA not yet initialized or disabled */ + HAL_DMA_STATE_READY = 0x01U, /*!< DMA initialized and ready for use */ + HAL_DMA_STATE_BUSY = 0x02U, /*!< DMA process is ongoing */ + HAL_DMA_STATE_TIMEOUT = 0x03U, /*!< DMA timeout state */ +} HAL_DMA_StateTypeDef; + +/** + * @brief HAL DMA Error Code structure definition + */ +typedef enum +{ + HAL_DMA_FULL_TRANSFER = 0x00U, /*!< Full transfer */ + HAL_DMA_HALF_TRANSFER = 0x01U /*!< Half Transfer */ +} HAL_DMA_LevelCompleteTypeDef; + + +/** + * @brief HAL DMA Callback ID structure definition + */ +typedef enum +{ + HAL_DMA_XFER_CPLT_CB_ID = 0x00U, /*!< Full transfer */ + HAL_DMA_XFER_HALFCPLT_CB_ID = 0x01U, /*!< Half transfer */ + HAL_DMA_XFER_ERROR_CB_ID = 0x02U, /*!< Error */ + HAL_DMA_XFER_ABORT_CB_ID = 0x03U, /*!< Abort */ + HAL_DMA_XFER_ALL_CB_ID = 0x04U /*!< All */ +} HAL_DMA_CallbackIDTypeDef; + +/** + * @brief DMA handle Structure definition + */ +typedef struct __DMA_HandleTypeDef +{ + DMA_Channel_TypeDef *Instance; /*!< Register base address */ + + DMA_InitTypeDef Init; /*!< DMA communication parameters */ + + HAL_LockTypeDef Lock; /*!< DMA locking object */ + + __IO HAL_DMA_StateTypeDef State; /*!< DMA transfer state */ + + void *Parent; /*!< Parent object state */ + + void (* XferCpltCallback)(struct __DMA_HandleTypeDef *hdma); /*!< DMA transfer complete callback */ + + void (* XferHalfCpltCallback)(struct __DMA_HandleTypeDef *hdma); /*!< DMA Half transfer complete callback */ + + void (* XferErrorCallback)(struct __DMA_HandleTypeDef *hdma); /*!< DMA transfer error callback */ + + void (* XferAbortCallback)(struct __DMA_HandleTypeDef *hdma); /*!< DMA transfer abort callback */ + + __IO uint32_t ErrorCode; /*!< DMA Error code */ + + DMA_TypeDef *DmaBaseAddress; /*!< DMA Channel Base Address */ + + uint32_t ChannelIndex; /*!< DMA Channel Index */ + +#if defined(DMAMUX1) + DMAMUX_Channel_TypeDef *DMAmuxChannel; /*!< Register base address */ + + DMAMUX_ChannelStatus_TypeDef *DMAmuxChannelStatus; /*!< DMAMUX Channels Status Base Address */ + + uint32_t DMAmuxChannelStatusMask; /*!< DMAMUX Channel Status Mask */ + + DMAMUX_RequestGen_TypeDef *DMAmuxRequestGen; /*!< DMAMUX request generator Base Address */ + + DMAMUX_RequestGenStatus_TypeDef *DMAmuxRequestGenStatus; /*!< DMAMUX request generator Address */ + + uint32_t DMAmuxRequestGenStatusMask; /*!< DMAMUX request generator Status mask */ + +#endif /* DMAMUX1 */ + +} DMA_HandleTypeDef; +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup DMA_Exported_Constants DMA Exported Constants + * @{ + */ + +/** @defgroup DMA_Error_Code DMA Error Code + * @{ + */ +#define HAL_DMA_ERROR_NONE 0x00000000U /*!< No error */ +#define HAL_DMA_ERROR_TE 0x00000001U /*!< Transfer error */ +#define HAL_DMA_ERROR_NO_XFER 0x00000004U /*!< Abort requested with no Xfer ongoing */ +#define HAL_DMA_ERROR_TIMEOUT 0x00000020U /*!< Timeout error */ +#define HAL_DMA_ERROR_NOT_SUPPORTED 0x00000100U /*!< Not supported mode */ +#define HAL_DMA_ERROR_SYNC 0x00000200U /*!< DMAMUX sync overrun error */ +#define HAL_DMA_ERROR_REQGEN 0x00000400U /*!< DMAMUX request generator overrun error */ + +/** + * @} + */ + +/** @defgroup DMA_request DMA request + * @{ + */ +#if !defined (DMAMUX1) + +#define DMA_REQUEST_0 0U +#define DMA_REQUEST_1 1U +#define DMA_REQUEST_2 2U +#define DMA_REQUEST_3 3U +#define DMA_REQUEST_4 4U +#define DMA_REQUEST_5 5U +#define DMA_REQUEST_6 6U +#define DMA_REQUEST_7 7U + +#endif + +#if defined(DMAMUX1) + +#define DMA_REQUEST_MEM2MEM 0U /*!< memory to memory transfer */ + +#define DMA_REQUEST_GENERATOR0 1U /*!< DMAMUX1 request generator 0 */ +#define DMA_REQUEST_GENERATOR1 2U /*!< DMAMUX1 request generator 1 */ +#define DMA_REQUEST_GENERATOR2 3U /*!< DMAMUX1 request generator 2 */ +#define DMA_REQUEST_GENERATOR3 4U /*!< DMAMUX1 request generator 3 */ + +#define DMA_REQUEST_ADC1 5U /*!< DMAMUX1 ADC1 request */ + +#if defined (STM32L4P5xx) || defined (STM32L4Q5xx) + +#define DMA_REQUEST_ADC2 6U /*!< DMAMUX1 ADC1 request */ + +#define DMA_REQUEST_DAC1_CH1 7U /*!< DMAMUX1 DAC1 CH1 request */ +#define DMA_REQUEST_DAC1_CH2 8U /*!< DMAMUX1 DAC1 CH2 request */ + +#define DMA_REQUEST_TIM6_UP 9U /*!< DMAMUX1 TIM6 UP request */ +#define DMA_REQUEST_TIM7_UP 10U /*!< DMAMUX1 TIM7 UP request */ + +#define DMA_REQUEST_SPI1_RX 11U /*!< DMAMUX1 SPI1 RX request */ +#define DMA_REQUEST_SPI1_TX 12U /*!< DMAMUX1 SPI1 TX request */ +#define DMA_REQUEST_SPI2_RX 13U /*!< DMAMUX1 SPI2 RX request */ +#define DMA_REQUEST_SPI2_TX 14U /*!< DMAMUX1 SPI2 TX request */ +#define DMA_REQUEST_SPI3_RX 15U /*!< DMAMUX1 SPI3 RX request */ +#define DMA_REQUEST_SPI3_TX 16U /*!< DMAMUX1 SPI3 TX request */ + +#define DMA_REQUEST_I2C1_RX 17U /*!< DMAMUX1 I2C1 RX request */ +#define DMA_REQUEST_I2C1_TX 18U /*!< DMAMUX1 I2C1 TX request */ +#define DMA_REQUEST_I2C2_RX 19U /*!< DMAMUX1 I2C2 RX request */ +#define DMA_REQUEST_I2C2_TX 20U /*!< DMAMUX1 I2C2 TX request */ +#define DMA_REQUEST_I2C3_RX 21U /*!< DMAMUX1 I2C3 RX request */ +#define DMA_REQUEST_I2C3_TX 22U /*!< DMAMUX1 I2C3 TX request */ +#define DMA_REQUEST_I2C4_RX 23U /*!< DMAMUX1 I2C4 RX request */ +#define DMA_REQUEST_I2C4_TX 24U /*!< DMAMUX1 I2C4 TX request */ + +#define DMA_REQUEST_USART1_RX 25U /*!< DMAMUX1 USART1 RX request */ +#define DMA_REQUEST_USART1_TX 26U /*!< DMAMUX1 USART1 TX request */ +#define DMA_REQUEST_USART2_RX 27U /*!< DMAMUX1 USART2 RX request */ +#define DMA_REQUEST_USART2_TX 28U /*!< DMAMUX1 USART2 TX request */ +#define DMA_REQUEST_USART3_RX 29U /*!< DMAMUX1 USART3 RX request */ +#define DMA_REQUEST_USART3_TX 30U /*!< DMAMUX1 USART3 TX request */ + +#define DMA_REQUEST_UART4_RX 31U /*!< DMAMUX1 UART4 RX request */ +#define DMA_REQUEST_UART4_TX 32U /*!< DMAMUX1 UART4 TX request */ +#define DMA_REQUEST_UART5_RX 33U /*!< DMAMUX1 UART5 RX request */ +#define DMA_REQUEST_UART5_TX 34U /*!< DMAMUX1 UART5 TX request */ + +#define DMA_REQUEST_LPUART1_RX 35U /*!< DMAMUX1 LP_UART1_RX request */ +#define DMA_REQUEST_LPUART1_TX 36U /*!< DMAMUX1 LP_UART1_RX request */ + +#define DMA_REQUEST_SAI1_A 37U /*!< DMAMUX1 SAI1 A request */ +#define DMA_REQUEST_SAI1_B 38U /*!< DMAMUX1 SAI1 B request */ +#define DMA_REQUEST_SAI2_A 39U /*!< DMAMUX1 SAI2 A request */ +#define DMA_REQUEST_SAI2_B 40U /*!< DMAMUX1 SAI2 B request */ + +#define DMA_REQUEST_OCTOSPI1 41U /*!< DMAMUX1 OCTOSPI1 request */ +#define DMA_REQUEST_OCTOSPI2 42U /*!< DMAMUX1 OCTOSPI2 request */ + +#define DMA_REQUEST_TIM1_CH1 43U /*!< DMAMUX1 TIM1 CH1 request */ +#define DMA_REQUEST_TIM1_CH2 44U /*!< DMAMUX1 TIM1 CH2 request */ +#define DMA_REQUEST_TIM1_CH3 45U /*!< DMAMUX1 TIM1 CH3 request */ +#define DMA_REQUEST_TIM1_CH4 46U /*!< DMAMUX1 TIM1 CH4 request */ +#define DMA_REQUEST_TIM1_UP 47U /*!< DMAMUX1 TIM1 UP request */ +#define DMA_REQUEST_TIM1_TRIG 48U /*!< DMAMUX1 TIM1 TRIG request */ +#define DMA_REQUEST_TIM1_COM 49U /*!< DMAMUX1 TIM1 COM request */ + +#define DMA_REQUEST_TIM8_CH1 50U /*!< DMAMUX1 TIM8 CH1 request */ +#define DMA_REQUEST_TIM8_CH2 51U /*!< DMAMUX1 TIM8 CH2 request */ +#define DMA_REQUEST_TIM8_CH3 52U /*!< DMAMUX1 TIM8 CH3 request */ +#define DMA_REQUEST_TIM8_CH4 53U /*!< DMAMUX1 TIM8 CH4 request */ +#define DMA_REQUEST_TIM8_UP 54U /*!< DMAMUX1 TIM8 UP request */ +#define DMA_REQUEST_TIM8_TRIG 55U /*!< DMAMUX1 TIM8 TRIG request */ +#define DMA_REQUEST_TIM8_COM 56U /*!< DMAMUX1 TIM8 COM request */ + +#define DMA_REQUEST_TIM2_CH1 57U /*!< DMAMUX1 TIM2 CH1 request */ +#define DMA_REQUEST_TIM2_CH2 58U /*!< DMAMUX1 TIM2 CH2 request */ +#define DMA_REQUEST_TIM2_CH3 59U /*!< DMAMUX1 TIM2 CH3 request */ +#define DMA_REQUEST_TIM2_CH4 60U /*!< DMAMUX1 TIM2 CH4 request */ +#define DMA_REQUEST_TIM2_UP 61U /*!< DMAMUX1 TIM2 UP request */ + +#define DMA_REQUEST_TIM3_CH1 62U /*!< DMAMUX1 TIM3 CH1 request */ +#define DMA_REQUEST_TIM3_CH2 63U /*!< DMAMUX1 TIM3 CH2 request */ +#define DMA_REQUEST_TIM3_CH3 64U /*!< DMAMUX1 TIM3 CH3 request */ +#define DMA_REQUEST_TIM3_CH4 65U /*!< DMAMUX1 TIM3 CH4 request */ +#define DMA_REQUEST_TIM3_UP 66U /*!< DMAMUX1 TIM3 UP request */ +#define DMA_REQUEST_TIM3_TRIG 67U /*!< DMAMUX1 TIM3 TRIG request */ + +#define DMA_REQUEST_TIM4_CH1 68U /*!< DMAMUX1 TIM4 CH1 request */ +#define DMA_REQUEST_TIM4_CH2 69U /*!< DMAMUX1 TIM4 CH2 request */ +#define DMA_REQUEST_TIM4_CH3 70U /*!< DMAMUX1 TIM4 CH3 request */ +#define DMA_REQUEST_TIM4_CH4 71U /*!< DMAMUX1 TIM4 CH4 request */ +#define DMA_REQUEST_TIM4_UP 72U /*!< DMAMUX1 TIM4 UP request */ + +#define DMA_REQUEST_TIM5_CH1 73U /*!< DMAMUX1 TIM5 CH1 request */ +#define DMA_REQUEST_TIM5_CH2 74U /*!< DMAMUX1 TIM5 CH2 request */ +#define DMA_REQUEST_TIM5_CH3 75U /*!< DMAMUX1 TIM5 CH3 request */ +#define DMA_REQUEST_TIM5_CH4 76U /*!< DMAMUX1 TIM5 CH4 request */ +#define DMA_REQUEST_TIM5_UP 77U /*!< DMAMUX1 TIM5 UP request */ +#define DMA_REQUEST_TIM5_TRIG 78U /*!< DMAMUX1 TIM5 TRIG request */ + +#define DMA_REQUEST_TIM15_CH1 79U /*!< DMAMUX1 TIM15 CH1 request */ +#define DMA_REQUEST_TIM15_UP 80U /*!< DMAMUX1 TIM15 UP request */ +#define DMA_REQUEST_TIM15_TRIG 81U /*!< DMAMUX1 TIM15 TRIG request */ +#define DMA_REQUEST_TIM15_COM 82U /*!< DMAMUX1 TIM15 COM request */ + +#define DMA_REQUEST_TIM16_CH1 83U /*!< DMAMUX1 TIM16 CH1 request */ +#define DMA_REQUEST_TIM16_UP 84U /*!< DMAMUX1 TIM16 UP request */ +#define DMA_REQUEST_TIM17_CH1 85U /*!< DMAMUX1 TIM17 CH1 request */ +#define DMA_REQUEST_TIM17_UP 86U /*!< DMAMUX1 TIM17 UP request */ + +#define DMA_REQUEST_DFSDM1_FLT0 87U /*!< DMAMUX1 DFSDM1 Filter0 request */ +#define DMA_REQUEST_DFSDM1_FLT1 88U /*!< DMAMUX1 DFSDM1 Filter1 request */ + +#define DMA_REQUEST_DCMI 91U /*!< DMAMUX1 DCMI request */ +#define DMA_REQUEST_DCMI_PSSI 91U /*!< DMAMUX1 DCMI/PSSI request */ + +#define DMA_REQUEST_AES_IN 92U /*!< DMAMUX1 AES IN request */ +#define DMA_REQUEST_AES_OUT 93U /*!< DMAMUX1 AES OUT request */ + +#define DMA_REQUEST_HASH_IN 94U /*!< DMAMUX1 HASH IN request */ + +#else + +#define DMA_REQUEST_DAC1_CH1 6U /*!< DMAMUX1 DAC1 CH1 request */ +#define DMA_REQUEST_DAC1_CH2 7U /*!< DMAMUX1 DAC1 CH2 request */ + +#define DMA_REQUEST_TIM6_UP 8U /*!< DMAMUX1 TIM6 UP request */ +#define DMA_REQUEST_TIM7_UP 9U /*!< DMAMUX1 TIM7 UP request */ + +#define DMA_REQUEST_SPI1_RX 10U /*!< DMAMUX1 SPI1 RX request */ +#define DMA_REQUEST_SPI1_TX 11U /*!< DMAMUX1 SPI1 TX request */ +#define DMA_REQUEST_SPI2_RX 12U /*!< DMAMUX1 SPI2 RX request */ +#define DMA_REQUEST_SPI2_TX 13U /*!< DMAMUX1 SPI2 TX request */ +#define DMA_REQUEST_SPI3_RX 14U /*!< DMAMUX1 SPI3 RX request */ +#define DMA_REQUEST_SPI3_TX 15U /*!< DMAMUX1 SPI3 TX request */ + +#define DMA_REQUEST_I2C1_RX 16U /*!< DMAMUX1 I2C1 RX request */ +#define DMA_REQUEST_I2C1_TX 17U /*!< DMAMUX1 I2C1 TX request */ +#define DMA_REQUEST_I2C2_RX 18U /*!< DMAMUX1 I2C2 RX request */ +#define DMA_REQUEST_I2C2_TX 19U /*!< DMAMUX1 I2C2 TX request */ +#define DMA_REQUEST_I2C3_RX 20U /*!< DMAMUX1 I2C3 RX request */ +#define DMA_REQUEST_I2C3_TX 21U /*!< DMAMUX1 I2C3 TX request */ +#define DMA_REQUEST_I2C4_RX 22U /*!< DMAMUX1 I2C4 RX request */ +#define DMA_REQUEST_I2C4_TX 23U /*!< DMAMUX1 I2C4 TX request */ + +#define DMA_REQUEST_USART1_RX 24U /*!< DMAMUX1 USART1 RX request */ +#define DMA_REQUEST_USART1_TX 25U /*!< DMAMUX1 USART1 TX request */ +#define DMA_REQUEST_USART2_RX 26U /*!< DMAMUX1 USART2 RX request */ +#define DMA_REQUEST_USART2_TX 27U /*!< DMAMUX1 USART2 TX request */ +#define DMA_REQUEST_USART3_RX 28U /*!< DMAMUX1 USART3 RX request */ +#define DMA_REQUEST_USART3_TX 29U /*!< DMAMUX1 USART3 TX request */ + +#define DMA_REQUEST_UART4_RX 30U /*!< DMAMUX1 UART4 RX request */ +#define DMA_REQUEST_UART4_TX 31U /*!< DMAMUX1 UART4 TX request */ +#define DMA_REQUEST_UART5_RX 32U /*!< DMAMUX1 UART5 RX request */ +#define DMA_REQUEST_UART5_TX 33U /*!< DMAMUX1 UART5 TX request */ + +#define DMA_REQUEST_LPUART1_RX 34U /*!< DMAMUX1 LP_UART1_RX request */ +#define DMA_REQUEST_LPUART1_TX 35U /*!< DMAMUX1 LP_UART1_RX request */ + +#define DMA_REQUEST_SAI1_A 36U /*!< DMAMUX1 SAI1 A request */ +#define DMA_REQUEST_SAI1_B 37U /*!< DMAMUX1 SAI1 B request */ +#define DMA_REQUEST_SAI2_A 38U /*!< DMAMUX1 SAI2 A request */ +#define DMA_REQUEST_SAI2_B 39U /*!< DMAMUX1 SAI2 B request */ + +#define DMA_REQUEST_OCTOSPI1 40U /*!< DMAMUX1 OCTOSPI1 request */ +#define DMA_REQUEST_OCTOSPI2 41U /*!< DMAMUX1 OCTOSPI2 request */ + +#define DMA_REQUEST_TIM1_CH1 42U /*!< DMAMUX1 TIM1 CH1 request */ +#define DMA_REQUEST_TIM1_CH2 43U /*!< DMAMUX1 TIM1 CH2 request */ +#define DMA_REQUEST_TIM1_CH3 44U /*!< DMAMUX1 TIM1 CH3 request */ +#define DMA_REQUEST_TIM1_CH4 45U /*!< DMAMUX1 TIM1 CH4 request */ +#define DMA_REQUEST_TIM1_UP 46U /*!< DMAMUX1 TIM1 UP request */ +#define DMA_REQUEST_TIM1_TRIG 47U /*!< DMAMUX1 TIM1 TRIG request */ +#define DMA_REQUEST_TIM1_COM 48U /*!< DMAMUX1 TIM1 COM request */ + +#define DMA_REQUEST_TIM8_CH1 49U /*!< DMAMUX1 TIM8 CH1 request */ +#define DMA_REQUEST_TIM8_CH2 50U /*!< DMAMUX1 TIM8 CH2 request */ +#define DMA_REQUEST_TIM8_CH3 51U /*!< DMAMUX1 TIM8 CH3 request */ +#define DMA_REQUEST_TIM8_CH4 52U /*!< DMAMUX1 TIM8 CH4 request */ +#define DMA_REQUEST_TIM8_UP 53U /*!< DMAMUX1 TIM8 UP request */ +#define DMA_REQUEST_TIM8_TRIG 54U /*!< DMAMUX1 TIM8 TRIG request */ +#define DMA_REQUEST_TIM8_COM 55U /*!< DMAMUX1 TIM8 COM request */ + +#define DMA_REQUEST_TIM2_CH1 56U /*!< DMAMUX1 TIM2 CH1 request */ +#define DMA_REQUEST_TIM2_CH2 57U /*!< DMAMUX1 TIM2 CH2 request */ +#define DMA_REQUEST_TIM2_CH3 58U /*!< DMAMUX1 TIM2 CH3 request */ +#define DMA_REQUEST_TIM2_CH4 59U /*!< DMAMUX1 TIM2 CH4 request */ +#define DMA_REQUEST_TIM2_UP 60U /*!< DMAMUX1 TIM2 UP request */ + +#define DMA_REQUEST_TIM3_CH1 61U /*!< DMAMUX1 TIM3 CH1 request */ +#define DMA_REQUEST_TIM3_CH2 62U /*!< DMAMUX1 TIM3 CH2 request */ +#define DMA_REQUEST_TIM3_CH3 63U /*!< DMAMUX1 TIM3 CH3 request */ +#define DMA_REQUEST_TIM3_CH4 64U /*!< DMAMUX1 TIM3 CH4 request */ +#define DMA_REQUEST_TIM3_UP 65U /*!< DMAMUX1 TIM3 UP request */ +#define DMA_REQUEST_TIM3_TRIG 66U /*!< DMAMUX1 TIM3 TRIG request */ + +#define DMA_REQUEST_TIM4_CH1 67U /*!< DMAMUX1 TIM4 CH1 request */ +#define DMA_REQUEST_TIM4_CH2 68U /*!< DMAMUX1 TIM4 CH2 request */ +#define DMA_REQUEST_TIM4_CH3 69U /*!< DMAMUX1 TIM4 CH3 request */ +#define DMA_REQUEST_TIM4_CH4 70U /*!< DMAMUX1 TIM4 CH4 request */ +#define DMA_REQUEST_TIM4_UP 71U /*!< DMAMUX1 TIM4 UP request */ + +#define DMA_REQUEST_TIM5_CH1 72U /*!< DMAMUX1 TIM5 CH1 request */ +#define DMA_REQUEST_TIM5_CH2 73U /*!< DMAMUX1 TIM5 CH2 request */ +#define DMA_REQUEST_TIM5_CH3 74U /*!< DMAMUX1 TIM5 CH3 request */ +#define DMA_REQUEST_TIM5_CH4 75U /*!< DMAMUX1 TIM5 CH4 request */ +#define DMA_REQUEST_TIM5_UP 76U /*!< DMAMUX1 TIM5 UP request */ +#define DMA_REQUEST_TIM5_TRIG 77U /*!< DMAMUX1 TIM5 TRIG request */ + +#define DMA_REQUEST_TIM15_CH1 78U /*!< DMAMUX1 TIM15 CH1 request */ +#define DMA_REQUEST_TIM15_UP 79U /*!< DMAMUX1 TIM15 UP request */ +#define DMA_REQUEST_TIM15_TRIG 80U /*!< DMAMUX1 TIM15 TRIG request */ +#define DMA_REQUEST_TIM15_COM 81U /*!< DMAMUX1 TIM15 COM request */ + +#define DMA_REQUEST_TIM16_CH1 82U /*!< DMAMUX1 TIM16 CH1 request */ +#define DMA_REQUEST_TIM16_UP 83U /*!< DMAMUX1 TIM16 UP request */ +#define DMA_REQUEST_TIM17_CH1 84U /*!< DMAMUX1 TIM17 CH1 request */ +#define DMA_REQUEST_TIM17_UP 85U /*!< DMAMUX1 TIM17 UP request */ + +#define DMA_REQUEST_DFSDM1_FLT0 86U /*!< DMAMUX1 DFSDM1 Filter0 request */ +#define DMA_REQUEST_DFSDM1_FLT1 87U /*!< DMAMUX1 DFSDM1 Filter1 request */ +#define DMA_REQUEST_DFSDM1_FLT2 88U /*!< DMAMUX1 DFSDM1 Filter2 request */ +#define DMA_REQUEST_DFSDM1_FLT3 89U /*!< DMAMUX1 DFSDM1 Filter3 request */ + +#define DMA_REQUEST_DCMI 90U /*!< DMAMUX1 DCMI request */ + +#define DMA_REQUEST_AES_IN 91U /*!< DMAMUX1 AES IN request */ +#define DMA_REQUEST_AES_OUT 92U /*!< DMAMUX1 AES OUT request */ + +#define DMA_REQUEST_HASH_IN 93U /*!< DMAMUX1 HASH IN request */ +#endif /* STM32L4P5xx || STM32L4Q5xx */ + +#endif /* DMAMUX1 */ + +/** + * @} + */ + +/** @defgroup DMA_Data_transfer_direction DMA Data transfer direction + * @{ + */ +#define DMA_PERIPH_TO_MEMORY 0x00000000U /*!< Peripheral to memory direction */ +#define DMA_MEMORY_TO_PERIPH DMA_CCR_DIR /*!< Memory to peripheral direction */ +#define DMA_MEMORY_TO_MEMORY DMA_CCR_MEM2MEM /*!< Memory to memory direction */ +/** + * @} + */ + +/** @defgroup DMA_Peripheral_incremented_mode DMA Peripheral incremented mode + * @{ + */ +#define DMA_PINC_ENABLE DMA_CCR_PINC /*!< Peripheral increment mode Enable */ +#define DMA_PINC_DISABLE 0x00000000U /*!< Peripheral increment mode Disable */ +/** + * @} + */ + +/** @defgroup DMA_Memory_incremented_mode DMA Memory incremented mode + * @{ + */ +#define DMA_MINC_ENABLE DMA_CCR_MINC /*!< Memory increment mode Enable */ +#define DMA_MINC_DISABLE 0x00000000U /*!< Memory increment mode Disable */ +/** + * @} + */ + +/** @defgroup DMA_Peripheral_data_size DMA Peripheral data size + * @{ + */ +#define DMA_PDATAALIGN_BYTE 0x00000000U /*!< Peripheral data alignment : Byte */ +#define DMA_PDATAALIGN_HALFWORD DMA_CCR_PSIZE_0 /*!< Peripheral data alignment : HalfWord */ +#define DMA_PDATAALIGN_WORD DMA_CCR_PSIZE_1 /*!< Peripheral data alignment : Word */ +/** + * @} + */ + +/** @defgroup DMA_Memory_data_size DMA Memory data size + * @{ + */ +#define DMA_MDATAALIGN_BYTE 0x00000000U /*!< Memory data alignment : Byte */ +#define DMA_MDATAALIGN_HALFWORD DMA_CCR_MSIZE_0 /*!< Memory data alignment : HalfWord */ +#define DMA_MDATAALIGN_WORD DMA_CCR_MSIZE_1 /*!< Memory data alignment : Word */ +/** + * @} + */ + +/** @defgroup DMA_mode DMA mode + * @{ + */ +#define DMA_NORMAL 0x00000000U /*!< Normal mode */ +#define DMA_CIRCULAR DMA_CCR_CIRC /*!< Circular mode */ +/** + * @} + */ + +/** @defgroup DMA_Priority_level DMA Priority level + * @{ + */ +#define DMA_PRIORITY_LOW 0x00000000U /*!< Priority level : Low */ +#define DMA_PRIORITY_MEDIUM DMA_CCR_PL_0 /*!< Priority level : Medium */ +#define DMA_PRIORITY_HIGH DMA_CCR_PL_1 /*!< Priority level : High */ +#define DMA_PRIORITY_VERY_HIGH DMA_CCR_PL /*!< Priority level : Very_High */ +/** + * @} + */ + + +/** @defgroup DMA_interrupt_enable_definitions DMA interrupt enable definitions + * @{ + */ +#define DMA_IT_TC DMA_CCR_TCIE +#define DMA_IT_HT DMA_CCR_HTIE +#define DMA_IT_TE DMA_CCR_TEIE +/** + * @} + */ + +/** @defgroup DMA_flag_definitions DMA flag definitions + * @{ + */ +#define DMA_FLAG_GL1 DMA_ISR_GIF1 +#define DMA_FLAG_TC1 DMA_ISR_TCIF1 +#define DMA_FLAG_HT1 DMA_ISR_HTIF1 +#define DMA_FLAG_TE1 DMA_ISR_TEIF1 +#define DMA_FLAG_GL2 DMA_ISR_GIF2 +#define DMA_FLAG_TC2 DMA_ISR_TCIF2 +#define DMA_FLAG_HT2 DMA_ISR_HTIF2 +#define DMA_FLAG_TE2 DMA_ISR_TEIF2 +#define DMA_FLAG_GL3 DMA_ISR_GIF3 +#define DMA_FLAG_TC3 DMA_ISR_TCIF3 +#define DMA_FLAG_HT3 DMA_ISR_HTIF3 +#define DMA_FLAG_TE3 DMA_ISR_TEIF3 +#define DMA_FLAG_GL4 DMA_ISR_GIF4 +#define DMA_FLAG_TC4 DMA_ISR_TCIF4 +#define DMA_FLAG_HT4 DMA_ISR_HTIF4 +#define DMA_FLAG_TE4 DMA_ISR_TEIF4 +#define DMA_FLAG_GL5 DMA_ISR_GIF5 +#define DMA_FLAG_TC5 DMA_ISR_TCIF5 +#define DMA_FLAG_HT5 DMA_ISR_HTIF5 +#define DMA_FLAG_TE5 DMA_ISR_TEIF5 +#define DMA_FLAG_GL6 DMA_ISR_GIF6 +#define DMA_FLAG_TC6 DMA_ISR_TCIF6 +#define DMA_FLAG_HT6 DMA_ISR_HTIF6 +#define DMA_FLAG_TE6 DMA_ISR_TEIF6 +#define DMA_FLAG_GL7 DMA_ISR_GIF7 +#define DMA_FLAG_TC7 DMA_ISR_TCIF7 +#define DMA_FLAG_HT7 DMA_ISR_HTIF7 +#define DMA_FLAG_TE7 DMA_ISR_TEIF7 +/** + * @} + */ + +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ +/** @defgroup DMA_Exported_Macros DMA Exported Macros + * @{ + */ + +/** @brief Reset DMA handle state. + * @param __HANDLE__ DMA handle + * @retval None + */ +#define __HAL_DMA_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_DMA_STATE_RESET) + +/** + * @brief Enable the specified DMA Channel. + * @param __HANDLE__ DMA handle + * @retval None + */ +#define __HAL_DMA_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CCR |= DMA_CCR_EN) + +/** + * @brief Disable the specified DMA Channel. + * @param __HANDLE__ DMA handle + * @retval None + */ +#define __HAL_DMA_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CCR &= ~DMA_CCR_EN) + + +/* Interrupt & Flag management */ + +/** + * @brief Return the current DMA Channel transfer complete flag. + * @param __HANDLE__ DMA handle + * @retval The specified transfer complete flag index. + */ + +#define __HAL_DMA_GET_TC_FLAG_INDEX(__HANDLE__) \ +(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_TC1 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel1))? DMA_FLAG_TC1 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_TC2 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel2))? DMA_FLAG_TC2 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_TC3 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel3))? DMA_FLAG_TC3 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_TC4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel4))? DMA_FLAG_TC4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_FLAG_TC5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel5))? DMA_FLAG_TC5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_TC6 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel6))? DMA_FLAG_TC6 :\ + DMA_FLAG_TC7) + +/** + * @brief Return the current DMA Channel half transfer complete flag. + * @param __HANDLE__ DMA handle + * @retval The specified half transfer complete flag index. + */ +#define __HAL_DMA_GET_HT_FLAG_INDEX(__HANDLE__)\ +(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_HT1 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel1))? DMA_FLAG_HT1 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_HT2 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel2))? DMA_FLAG_HT2 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_HT3 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel3))? DMA_FLAG_HT3 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_HT4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel4))? DMA_FLAG_HT4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_FLAG_HT5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel5))? DMA_FLAG_HT5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_HT6 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel6))? DMA_FLAG_HT6 :\ + DMA_FLAG_HT7) + +/** + * @brief Return the current DMA Channel transfer error flag. + * @param __HANDLE__ DMA handle + * @retval The specified transfer error flag index. + */ +#define __HAL_DMA_GET_TE_FLAG_INDEX(__HANDLE__)\ +(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_TE1 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel1))? DMA_FLAG_TE1 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_TE2 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel2))? DMA_FLAG_TE2 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_TE3 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel3))? DMA_FLAG_TE3 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_TE4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel4))? DMA_FLAG_TE4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_FLAG_TE5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel5))? DMA_FLAG_TE5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_TE6 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel6))? DMA_FLAG_TE6 :\ + DMA_FLAG_TE7) + +/** + * @brief Return the current DMA Channel Global interrupt flag. + * @param __HANDLE__ DMA handle + * @retval The specified transfer error flag index. + */ +#define __HAL_DMA_GET_GI_FLAG_INDEX(__HANDLE__)\ +(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_ISR_GIF1 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel1))? DMA_ISR_GIF1 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_ISR_GIF2 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel2))? DMA_ISR_GIF2 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_ISR_GIF3 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel3))? DMA_ISR_GIF3 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_ISR_GIF4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel4))? DMA_ISR_GIF4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_ISR_GIF5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel5))? DMA_ISR_GIF5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_ISR_GIF6 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel6))? DMA_ISR_GIF6 :\ + DMA_ISR_GIF7) + +/** + * @brief Get the DMA Channel pending flags. + * @param __HANDLE__ DMA handle + * @param __FLAG__ Get the specified flag. + * This parameter can be any combination of the following values: + * @arg DMA_FLAG_TCx: Transfer complete flag + * @arg DMA_FLAG_HTx: Half transfer complete flag + * @arg DMA_FLAG_TEx: Transfer error flag + * @arg DMA_FLAG_GLx: Global interrupt flag + * Where x can be from 1 to 7 to select the DMA Channel x flag. + * @retval The state of FLAG (SET or RESET). + */ +#define __HAL_DMA_GET_FLAG(__HANDLE__, __FLAG__) (((uint32_t)((__HANDLE__)->Instance) > ((uint32_t)DMA1_Channel7))? \ + (DMA2->ISR & (__FLAG__)) : (DMA1->ISR & (__FLAG__))) + +/** + * @brief Clear the DMA Channel pending flags. + * @param __HANDLE__ DMA handle + * @param __FLAG__ specifies the flag to clear. + * This parameter can be any combination of the following values: + * @arg DMA_FLAG_TCx: Transfer complete flag + * @arg DMA_FLAG_HTx: Half transfer complete flag + * @arg DMA_FLAG_TEx: Transfer error flag + * @arg DMA_FLAG_GLx: Global interrupt flag + * Where x can be from 1 to 7 to select the DMA Channel x flag. + * @retval None + */ +#define __HAL_DMA_CLEAR_FLAG(__HANDLE__, __FLAG__) (((uint32_t)((__HANDLE__)->Instance) > ((uint32_t)DMA1_Channel7))? \ + (DMA2->IFCR = (__FLAG__)) : (DMA1->IFCR = (__FLAG__))) + +/** + * @brief Enable the specified DMA Channel interrupts. + * @param __HANDLE__ DMA handle + * @param __INTERRUPT__ specifies the DMA interrupt sources to be enabled or disabled. + * This parameter can be any combination of the following values: + * @arg DMA_IT_TC: Transfer complete interrupt mask + * @arg DMA_IT_HT: Half transfer complete interrupt mask + * @arg DMA_IT_TE: Transfer error interrupt mask + * @retval None + */ +#define __HAL_DMA_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CCR |= (__INTERRUPT__)) + +/** + * @brief Disable the specified DMA Channel interrupts. + * @param __HANDLE__ DMA handle + * @param __INTERRUPT__ specifies the DMA interrupt sources to be enabled or disabled. + * This parameter can be any combination of the following values: + * @arg DMA_IT_TC: Transfer complete interrupt mask + * @arg DMA_IT_HT: Half transfer complete interrupt mask + * @arg DMA_IT_TE: Transfer error interrupt mask + * @retval None + */ +#define __HAL_DMA_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CCR &= ~(__INTERRUPT__)) + +/** + * @brief Check whether the specified DMA Channel interrupt is enabled or not. + * @param __HANDLE__ DMA handle + * @param __INTERRUPT__ specifies the DMA interrupt source to check. + * This parameter can be one of the following values: + * @arg DMA_IT_TC: Transfer complete interrupt mask + * @arg DMA_IT_HT: Half transfer complete interrupt mask + * @arg DMA_IT_TE: Transfer error interrupt mask + * @retval The state of DMA_IT (SET or RESET). + */ +#define __HAL_DMA_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->CCR & (__INTERRUPT__))) + +/** + * @brief Return the number of remaining data units in the current DMA Channel transfer. + * @param __HANDLE__ DMA handle + * @retval The number of remaining data units in the current DMA Channel transfer. + */ +#define __HAL_DMA_GET_COUNTER(__HANDLE__) ((__HANDLE__)->Instance->CNDTR) + +/** + * @} + */ + +#if defined(DMAMUX1) +/* Include DMA HAL Extension module */ +#include "stm32l4xx_hal_dma_ex.h" +#endif /* DMAMUX1 */ + +/* Exported functions --------------------------------------------------------*/ + +/** @addtogroup DMA_Exported_Functions + * @{ + */ + +/** @addtogroup DMA_Exported_Functions_Group1 + * @{ + */ +/* Initialization and de-initialization functions *****************************/ +HAL_StatusTypeDef HAL_DMA_Init(DMA_HandleTypeDef *hdma); +HAL_StatusTypeDef HAL_DMA_DeInit(DMA_HandleTypeDef *hdma); +/** + * @} + */ + +/** @addtogroup DMA_Exported_Functions_Group2 + * @{ + */ +/* IO operation functions *****************************************************/ +HAL_StatusTypeDef HAL_DMA_Start(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength); +HAL_StatusTypeDef HAL_DMA_Start_IT(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength); +HAL_StatusTypeDef HAL_DMA_Abort(DMA_HandleTypeDef *hdma); +HAL_StatusTypeDef HAL_DMA_Abort_IT(DMA_HandleTypeDef *hdma); +HAL_StatusTypeDef HAL_DMA_PollForTransfer(DMA_HandleTypeDef *hdma, HAL_DMA_LevelCompleteTypeDef CompleteLevel, uint32_t Timeout); +void HAL_DMA_IRQHandler(DMA_HandleTypeDef *hdma); +HAL_StatusTypeDef HAL_DMA_RegisterCallback(DMA_HandleTypeDef *hdma, HAL_DMA_CallbackIDTypeDef CallbackID, void (* pCallback)(DMA_HandleTypeDef *_hdma)); +HAL_StatusTypeDef HAL_DMA_UnRegisterCallback(DMA_HandleTypeDef *hdma, HAL_DMA_CallbackIDTypeDef CallbackID); + +/** + * @} + */ + +/** @addtogroup DMA_Exported_Functions_Group3 + * @{ + */ +/* Peripheral State and Error functions ***************************************/ +HAL_DMA_StateTypeDef HAL_DMA_GetState(DMA_HandleTypeDef *hdma); +uint32_t HAL_DMA_GetError(DMA_HandleTypeDef *hdma); +/** + * @} + */ + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup DMA_Private_Macros DMA Private Macros + * @{ + */ + +#define IS_DMA_DIRECTION(DIRECTION) (((DIRECTION) == DMA_PERIPH_TO_MEMORY ) || \ + ((DIRECTION) == DMA_MEMORY_TO_PERIPH) || \ + ((DIRECTION) == DMA_MEMORY_TO_MEMORY)) + +#define IS_DMA_BUFFER_SIZE(SIZE) (((SIZE) >= 0x1U) && ((SIZE) < 0x10000U)) + +#define IS_DMA_PERIPHERAL_INC_STATE(STATE) (((STATE) == DMA_PINC_ENABLE) || \ + ((STATE) == DMA_PINC_DISABLE)) + +#define IS_DMA_MEMORY_INC_STATE(STATE) (((STATE) == DMA_MINC_ENABLE) || \ + ((STATE) == DMA_MINC_DISABLE)) + +#if !defined (DMAMUX1) + +#define IS_DMA_ALL_REQUEST(REQUEST) (((REQUEST) == DMA_REQUEST_0) || \ + ((REQUEST) == DMA_REQUEST_1) || \ + ((REQUEST) == DMA_REQUEST_2) || \ + ((REQUEST) == DMA_REQUEST_3) || \ + ((REQUEST) == DMA_REQUEST_4) || \ + ((REQUEST) == DMA_REQUEST_5) || \ + ((REQUEST) == DMA_REQUEST_6) || \ + ((REQUEST) == DMA_REQUEST_7)) +#endif + +#if defined(DMAMUX1) + +#define IS_DMA_ALL_REQUEST(REQUEST)((REQUEST) <= DMA_REQUEST_HASH_IN) + +#endif /* DMAMUX1 */ + +#define IS_DMA_PERIPHERAL_DATA_SIZE(SIZE) (((SIZE) == DMA_PDATAALIGN_BYTE) || \ + ((SIZE) == DMA_PDATAALIGN_HALFWORD) || \ + ((SIZE) == DMA_PDATAALIGN_WORD)) + +#define IS_DMA_MEMORY_DATA_SIZE(SIZE) (((SIZE) == DMA_MDATAALIGN_BYTE) || \ + ((SIZE) == DMA_MDATAALIGN_HALFWORD) || \ + ((SIZE) == DMA_MDATAALIGN_WORD )) + +#define IS_DMA_MODE(MODE) (((MODE) == DMA_NORMAL ) || \ + ((MODE) == DMA_CIRCULAR)) + +#define IS_DMA_PRIORITY(PRIORITY) (((PRIORITY) == DMA_PRIORITY_LOW ) || \ + ((PRIORITY) == DMA_PRIORITY_MEDIUM) || \ + ((PRIORITY) == DMA_PRIORITY_HIGH) || \ + ((PRIORITY) == DMA_PRIORITY_VERY_HIGH)) + +/** + * @} + */ + +/* Private functions ---------------------------------------------------------*/ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32L4xx_HAL_DMA_H */ diff --git a/CablePositioning_IAP_V1.0/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_dma_ex.h b/CablePositioning_IAP_V1.0/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_dma_ex.h index 65949a3..1b0d2d9 100644 --- a/CablePositioning_IAP_V1.0/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_dma_ex.h +++ b/CablePositioning_IAP_V1.0/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_dma_ex.h @@ -1,284 +1,284 @@ -/** - ****************************************************************************** - * @file stm32l4xx_hal_dma_ex.h - * @author MCD Application Team - * @brief Header file of DMA HAL extension module. - ****************************************************************************** - * @attention - * - * Copyright (c) 2017 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef STM32L4xx_HAL_DMA_EX_H -#define STM32L4xx_HAL_DMA_EX_H - -#ifdef __cplusplus -extern "C" { -#endif - -#if defined(DMAMUX1) - -/* Includes ------------------------------------------------------------------*/ -#include "stm32l4xx_hal_def.h" - -/** @addtogroup STM32L4xx_HAL_Driver - * @{ - */ - -/** @addtogroup DMAEx - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ -/** @defgroup DMAEx_Exported_Types DMAEx Exported Types - * @{ - */ - -/** - * @brief HAL DMA Synchro definition - */ - - -/** - * @brief HAL DMAMUX Synchronization configuration structure definition - */ -typedef struct -{ - uint32_t SyncSignalID; /*!< Specifies the synchronization signal gating the DMA request in periodic mode. - This parameter can be a value of @ref DMAEx_DMAMUX_SyncSignalID_selection */ - - uint32_t SyncPolarity; /*!< Specifies the polarity of the signal on which the DMA request is synchronized. - This parameter can be a value of @ref DMAEx_DMAMUX_SyncPolarity_selection */ - - FunctionalState SyncEnable; /*!< Specifies if the synchronization shall be enabled or disabled - This parameter can take the value ENABLE or DISABLE*/ - - - FunctionalState EventEnable; /*!< Specifies if an event shall be generated once the RequestNumber is reached. - This parameter can take the value ENABLE or DISABLE */ - - uint32_t RequestNumber; /*!< Specifies the number of DMA request that will be authorized after a sync event - This parameter must be a number between Min_Data = 1 and Max_Data = 32 */ - - -}HAL_DMA_MuxSyncConfigTypeDef; - - -/** - * @brief HAL DMAMUX request generator parameters structure definition - */ -typedef struct -{ - uint32_t SignalID; /*!< Specifies the ID of the signal used for DMAMUX request generator - This parameter can be a value of @ref DMAEx_DMAMUX_SignalGeneratorID_selection */ - - uint32_t Polarity; /*!< Specifies the polarity of the signal on which the request is generated. - This parameter can be a value of @ref DMAEx_DMAMUX_RequestGeneneratorPolarity_selection */ - - uint32_t RequestNumber; /*!< Specifies the number of DMA request that will be generated after a signal event - This parameter must be a number between Min_Data = 1 and Max_Data = 32 */ - -}HAL_DMA_MuxRequestGeneratorConfigTypeDef; - -/** - * @} - */ - -/* Exported constants --------------------------------------------------------*/ -/** @defgroup DMAEx_Exported_Constants DMAEx Exported Constants - * @{ - */ - -/** @defgroup DMAEx_DMAMUX_SyncSignalID_selection DMAMUX SyncSignalID selection - * @{ - */ -#define HAL_DMAMUX1_SYNC_EXTI0 0U /*!< Synchronization Signal is EXTI0 IT */ -#define HAL_DMAMUX1_SYNC_EXTI1 1U /*!< Synchronization Signal is EXTI1 IT */ -#define HAL_DMAMUX1_SYNC_EXTI2 2U /*!< Synchronization Signal is EXTI2 IT */ -#define HAL_DMAMUX1_SYNC_EXTI3 3U /*!< Synchronization Signal is EXTI3 IT */ -#define HAL_DMAMUX1_SYNC_EXTI4 4U /*!< Synchronization Signal is EXTI4 IT */ -#define HAL_DMAMUX1_SYNC_EXTI5 5U /*!< Synchronization Signal is EXTI5 IT */ -#define HAL_DMAMUX1_SYNC_EXTI6 6U /*!< Synchronization Signal is EXTI6 IT */ -#define HAL_DMAMUX1_SYNC_EXTI7 7U /*!< Synchronization Signal is EXTI7 IT */ -#define HAL_DMAMUX1_SYNC_EXTI8 8U /*!< Synchronization Signal is EXTI8 IT */ -#define HAL_DMAMUX1_SYNC_EXTI9 9U /*!< Synchronization Signal is EXTI9 IT */ -#define HAL_DMAMUX1_SYNC_EXTI10 10U /*!< Synchronization Signal is EXTI10 IT */ -#define HAL_DMAMUX1_SYNC_EXTI11 11U /*!< Synchronization Signal is EXTI11 IT */ -#define HAL_DMAMUX1_SYNC_EXTI12 12U /*!< Synchronization Signal is EXTI12 IT */ -#define HAL_DMAMUX1_SYNC_EXTI13 13U /*!< Synchronization Signal is EXTI13 IT */ -#define HAL_DMAMUX1_SYNC_EXTI14 14U /*!< Synchronization Signal is EXTI14 IT */ -#define HAL_DMAMUX1_SYNC_EXTI15 15U /*!< Synchronization Signal is EXTI15 IT */ -#define HAL_DMAMUX1_SYNC_DMAMUX1_CH0_EVT 16U /*!< Synchronization Signal is DMAMUX1 Channel0 Event */ -#define HAL_DMAMUX1_SYNC_DMAMUX1_CH1_EVT 17U /*!< Synchronization Signal is DMAMUX1 Channel1 Event */ -#define HAL_DMAMUX1_SYNC_DMAMUX1_CH2_EVT 18U /*!< Synchronization Signal is DMAMUX1 Channel2 Event */ -#define HAL_DMAMUX1_SYNC_DMAMUX1_CH3_EVT 19U /*!< Synchronization Signal is DMAMUX1 Channel3 Event */ -#define HAL_DMAMUX1_SYNC_LPTIM1_OUT 20U /*!< Synchronization Signal is LPTIM1 OUT */ -#define HAL_DMAMUX1_SYNC_LPTIM2_OUT 21U /*!< Synchronization Signal is LPTIM2 OUT */ -#if defined (STM32L4R5xx) || defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined (STM32L4S9xx) -#define HAL_DMAMUX1_SYNC_DSI_TE 22U /*!< Synchronization Signal is DSI Tearing Effect */ -#define HAL_DMAMUX1_SYNC_DSI_EOT 23U /*!< Synchronization Signal is DSI End of refresh */ -#endif /* STM32L4R5xx || STM32L4R7xx || STM32L4R9xx || STM32L4S5xx || STM32L4S7xx || STM32L4S9xx */ -#define HAL_DMAMUX1_SYNC_DMA2D_EOT 24U /*!< Synchronization Signal is DMA2D End of Transfer */ -#define HAL_DMAMUX1_SYNC_LDTC_IT 25U /*!< Synchronization Signal is LDTC IT */ - -/** - * @} - */ - -/** @defgroup DMAEx_DMAMUX_SyncPolarity_selection DMAMUX SyncPolarity selection - * @{ - */ -#define HAL_DMAMUX_SYNC_NO_EVENT 0U /*!< block synchronization events */ -#define HAL_DMAMUX_SYNC_RISING DMAMUX_CxCR_SPOL_0 /*!< synchronize with rising edge events */ -#define HAL_DMAMUX_SYNC_FALLING DMAMUX_CxCR_SPOL_1 /*!< synchronize with falling edge events */ -#define HAL_DMAMUX_SYNC_RISING_FALLING DMAMUX_CxCR_SPOL /*!< synchronize with rising and falling edge events */ - -/** - * @} - */ - -/** @defgroup DMAEx_DMAMUX_SignalGeneratorID_selection DMAMUX SignalGeneratorID selection - * @{ - */ - -#define HAL_DMAMUX1_REQ_GEN_EXTI0 0U /*!< Request generator Signal is EXTI0 IT */ -#define HAL_DMAMUX1_REQ_GEN_EXTI1 1U /*!< Request generator Signal is EXTI1 IT */ -#define HAL_DMAMUX1_REQ_GEN_EXTI2 2U /*!< Request generator Signal is EXTI2 IT */ -#define HAL_DMAMUX1_REQ_GEN_EXTI3 3U /*!< Request generator Signal is EXTI3 IT */ -#define HAL_DMAMUX1_REQ_GEN_EXTI4 4U /*!< Request generator Signal is EXTI4 IT */ -#define HAL_DMAMUX1_REQ_GEN_EXTI5 5U /*!< Request generator Signal is EXTI5 IT */ -#define HAL_DMAMUX1_REQ_GEN_EXTI6 6U /*!< Request generator Signal is EXTI6 IT */ -#define HAL_DMAMUX1_REQ_GEN_EXTI7 7U /*!< Request generator Signal is EXTI7 IT */ -#define HAL_DMAMUX1_REQ_GEN_EXTI8 8U /*!< Request generator Signal is EXTI8 IT */ -#define HAL_DMAMUX1_REQ_GEN_EXTI9 9U /*!< Request generator Signal is EXTI9 IT */ -#define HAL_DMAMUX1_REQ_GEN_EXTI10 10U /*!< Request generator Signal is EXTI10 IT */ -#define HAL_DMAMUX1_REQ_GEN_EXTI11 11U /*!< Request generator Signal is EXTI11 IT */ -#define HAL_DMAMUX1_REQ_GEN_EXTI12 12U /*!< Request generator Signal is EXTI12 IT */ -#define HAL_DMAMUX1_REQ_GEN_EXTI13 13U /*!< Request generator Signal is EXTI13 IT */ -#define HAL_DMAMUX1_REQ_GEN_EXTI14 14U /*!< Request generator Signal is EXTI14 IT */ -#define HAL_DMAMUX1_REQ_GEN_EXTI15 15U /*!< Request generator Signal is EXTI15 IT */ -#define HAL_DMAMUX1_REQ_GEN_DMAMUX1_CH0_EVT 16U /*!< Request generator Signal is DMAMUX1 Channel0 Event */ -#define HAL_DMAMUX1_REQ_GEN_DMAMUX1_CH1_EVT 17U /*!< Request generator Signal is DMAMUX1 Channel1 Event */ -#define HAL_DMAMUX1_REQ_GEN_DMAMUX1_CH2_EVT 18U /*!< Request generator Signal is DMAMUX1 Channel2 Event */ -#define HAL_DMAMUX1_REQ_GEN_DMAMUX1_CH3_EVT 19U /*!< Request generator Signal is DMAMUX1 Channel3 Event */ -#define HAL_DMAMUX1_REQ_GEN_LPTIM1_OUT 20U /*!< Request generator Signal is LPTIM1 OUT */ -#define HAL_DMAMUX1_REQ_GEN_LPTIM2_OUT 21U /*!< Request generator Signal is LPTIM2 OUT */ -#if defined (STM32L4R5xx) || defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined (STM32L4S9xx) -#define HAL_DMAMUX1_REQ_GEN_DSI_TE 22U /*!< Request generator Signal is DSI Tearing Effect */ -#define HAL_DMAMUX1_REQ_GEN_DSI_EOT 23U /*!< Request generator Signal is DSI End of refresh */ -#endif /* STM32L4R5xx || STM32L4R7xx || STM32L4R9xx || STM32L4S5xx || STM32L4S7xx || STM32L4S9xx */ -#define HAL_DMAMUX1_REQ_GEN_DMA2D_EOT 24U /*!< Request generator Signal is DMA2D End of Transfer */ -#define HAL_DMAMUX1_REQ_GEN_LTDC_IT 25U /*!< Request generator Signal is LTDC IT */ - -/** - * @} - */ - -/** @defgroup DMAEx_DMAMUX_RequestGeneneratorPolarity_selection DMAMUX RequestGeneneratorPolarity selection - * @{ - */ -#define HAL_DMAMUX_REQ_GEN_NO_EVENT 0U /*!< block request generator events */ -#define HAL_DMAMUX_REQ_GEN_RISING DMAMUX_RGxCR_GPOL_0 /*!< generate request on rising edge events */ -#define HAL_DMAMUX_REQ_GEN_FALLING DMAMUX_RGxCR_GPOL_1 /*!< generate request on falling edge events */ -#define HAL_DMAMUX_REQ_GEN_RISING_FALLING DMAMUX_RGxCR_GPOL /*!< generate request on rising and falling edge events */ - -/** - * @} - */ - -/** - * @} - */ - -/* Exported macro ------------------------------------------------------------*/ - -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup DMAEx_Exported_Functions - * @{ - */ - -/* IO operation functions *****************************************************/ -/** @addtogroup DMAEx_Exported_Functions_Group1 - * @{ - */ - -/* ------------------------- REQUEST -----------------------------------------*/ -HAL_StatusTypeDef HAL_DMAEx_ConfigMuxRequestGenerator (DMA_HandleTypeDef *hdma, - HAL_DMA_MuxRequestGeneratorConfigTypeDef *pRequestGeneratorConfig); -HAL_StatusTypeDef HAL_DMAEx_EnableMuxRequestGenerator (DMA_HandleTypeDef *hdma); -HAL_StatusTypeDef HAL_DMAEx_DisableMuxRequestGenerator (DMA_HandleTypeDef *hdma); -/* -------------------------------------------------------------------------- */ - -/* ------------------------- SYNCHRO -----------------------------------------*/ -HAL_StatusTypeDef HAL_DMAEx_ConfigMuxSync(DMA_HandleTypeDef *hdma, HAL_DMA_MuxSyncConfigTypeDef *pSyncConfig); -/* -------------------------------------------------------------------------- */ - -void HAL_DMAEx_MUX_IRQHandler(DMA_HandleTypeDef *hdma); - -/** - * @} - */ - -/** - * @} - */ - - -/* Private defines -----------------------------------------------------------*/ -/* Private macros ------------------------------------------------------------*/ -/** @defgroup DMAEx_Private_Macros DMAEx Private Macros - * @brief DMAEx private macros - * @{ - */ - -#define IS_DMAMUX_SYNC_SIGNAL_ID(SIGNAL_ID) ((SIGNAL_ID) <= HAL_DMAMUX1_SYNC_LDTC_IT) - -#define IS_DMAMUX_SYNC_REQUEST_NUMBER(REQUEST_NUMBER) (((REQUEST_NUMBER) > 0U) && ((REQUEST_NUMBER) <= 32U)) - -#define IS_DMAMUX_SYNC_POLARITY(POLARITY) (((POLARITY) == HAL_DMAMUX_SYNC_NO_EVENT) || \ - ((POLARITY) == HAL_DMAMUX_SYNC_RISING) || \ - ((POLARITY) == HAL_DMAMUX_SYNC_FALLING) || \ - ((POLARITY) == HAL_DMAMUX_SYNC_RISING_FALLING)) - -#define IS_DMAMUX_SYNC_STATE(SYNC) (((SYNC) == DISABLE) || ((SYNC) == ENABLE)) - -#define IS_DMAMUX_SYNC_EVENT(EVENT) (((EVENT) == DISABLE) || \ - ((EVENT) == ENABLE)) - -#define IS_DMAMUX_REQUEST_GEN_SIGNAL_ID(SIGNAL_ID) ((SIGNAL_ID) <= HAL_DMAMUX1_REQ_GEN_LTDC_IT) - -#define IS_DMAMUX_REQUEST_GEN_REQUEST_NUMBER(REQUEST_NUMBER) (((REQUEST_NUMBER) > 0U) && ((REQUEST_NUMBER) <= 32U)) - -#define IS_DMAMUX_REQUEST_GEN_POLARITY(POLARITY) (((POLARITY) == HAL_DMAMUX_REQ_GEN_NO_EVENT) || \ - ((POLARITY) == HAL_DMAMUX_REQ_GEN_RISING) || \ - ((POLARITY) == HAL_DMAMUX_REQ_GEN_FALLING) || \ - ((POLARITY) == HAL_DMAMUX_REQ_GEN_RISING_FALLING)) - -/** - * @} - */ - - -/** - * @} - */ - -/** - * @} - */ - -#endif /* DMAMUX1 */ - -#ifdef __cplusplus -} -#endif - -#endif /* STM32L4xx_HAL_DMA_H */ +/** + ****************************************************************************** + * @file stm32l4xx_hal_dma_ex.h + * @author MCD Application Team + * @brief Header file of DMA HAL extension module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32L4xx_HAL_DMA_EX_H +#define STM32L4xx_HAL_DMA_EX_H + +#ifdef __cplusplus +extern "C" { +#endif + +#if defined(DMAMUX1) + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l4xx_hal_def.h" + +/** @addtogroup STM32L4xx_HAL_Driver + * @{ + */ + +/** @addtogroup DMAEx + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup DMAEx_Exported_Types DMAEx Exported Types + * @{ + */ + +/** + * @brief HAL DMA Synchro definition + */ + + +/** + * @brief HAL DMAMUX Synchronization configuration structure definition + */ +typedef struct +{ + uint32_t SyncSignalID; /*!< Specifies the synchronization signal gating the DMA request in periodic mode. + This parameter can be a value of @ref DMAEx_DMAMUX_SyncSignalID_selection */ + + uint32_t SyncPolarity; /*!< Specifies the polarity of the signal on which the DMA request is synchronized. + This parameter can be a value of @ref DMAEx_DMAMUX_SyncPolarity_selection */ + + FunctionalState SyncEnable; /*!< Specifies if the synchronization shall be enabled or disabled + This parameter can take the value ENABLE or DISABLE*/ + + + FunctionalState EventEnable; /*!< Specifies if an event shall be generated once the RequestNumber is reached. + This parameter can take the value ENABLE or DISABLE */ + + uint32_t RequestNumber; /*!< Specifies the number of DMA request that will be authorized after a sync event + This parameter must be a number between Min_Data = 1 and Max_Data = 32 */ + + +} HAL_DMA_MuxSyncConfigTypeDef; + + +/** + * @brief HAL DMAMUX request generator parameters structure definition + */ +typedef struct +{ + uint32_t SignalID; /*!< Specifies the ID of the signal used for DMAMUX request generator + This parameter can be a value of @ref DMAEx_DMAMUX_SignalGeneratorID_selection */ + + uint32_t Polarity; /*!< Specifies the polarity of the signal on which the request is generated. + This parameter can be a value of @ref DMAEx_DMAMUX_RequestGeneneratorPolarity_selection */ + + uint32_t RequestNumber; /*!< Specifies the number of DMA request that will be generated after a signal event + This parameter must be a number between Min_Data = 1 and Max_Data = 32 */ + +} HAL_DMA_MuxRequestGeneratorConfigTypeDef; + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup DMAEx_Exported_Constants DMAEx Exported Constants + * @{ + */ + +/** @defgroup DMAEx_DMAMUX_SyncSignalID_selection DMAMUX SyncSignalID selection + * @{ + */ +#define HAL_DMAMUX1_SYNC_EXTI0 0U /*!< Synchronization Signal is EXTI0 IT */ +#define HAL_DMAMUX1_SYNC_EXTI1 1U /*!< Synchronization Signal is EXTI1 IT */ +#define HAL_DMAMUX1_SYNC_EXTI2 2U /*!< Synchronization Signal is EXTI2 IT */ +#define HAL_DMAMUX1_SYNC_EXTI3 3U /*!< Synchronization Signal is EXTI3 IT */ +#define HAL_DMAMUX1_SYNC_EXTI4 4U /*!< Synchronization Signal is EXTI4 IT */ +#define HAL_DMAMUX1_SYNC_EXTI5 5U /*!< Synchronization Signal is EXTI5 IT */ +#define HAL_DMAMUX1_SYNC_EXTI6 6U /*!< Synchronization Signal is EXTI6 IT */ +#define HAL_DMAMUX1_SYNC_EXTI7 7U /*!< Synchronization Signal is EXTI7 IT */ +#define HAL_DMAMUX1_SYNC_EXTI8 8U /*!< Synchronization Signal is EXTI8 IT */ +#define HAL_DMAMUX1_SYNC_EXTI9 9U /*!< Synchronization Signal is EXTI9 IT */ +#define HAL_DMAMUX1_SYNC_EXTI10 10U /*!< Synchronization Signal is EXTI10 IT */ +#define HAL_DMAMUX1_SYNC_EXTI11 11U /*!< Synchronization Signal is EXTI11 IT */ +#define HAL_DMAMUX1_SYNC_EXTI12 12U /*!< Synchronization Signal is EXTI12 IT */ +#define HAL_DMAMUX1_SYNC_EXTI13 13U /*!< Synchronization Signal is EXTI13 IT */ +#define HAL_DMAMUX1_SYNC_EXTI14 14U /*!< Synchronization Signal is EXTI14 IT */ +#define HAL_DMAMUX1_SYNC_EXTI15 15U /*!< Synchronization Signal is EXTI15 IT */ +#define HAL_DMAMUX1_SYNC_DMAMUX1_CH0_EVT 16U /*!< Synchronization Signal is DMAMUX1 Channel0 Event */ +#define HAL_DMAMUX1_SYNC_DMAMUX1_CH1_EVT 17U /*!< Synchronization Signal is DMAMUX1 Channel1 Event */ +#define HAL_DMAMUX1_SYNC_DMAMUX1_CH2_EVT 18U /*!< Synchronization Signal is DMAMUX1 Channel2 Event */ +#define HAL_DMAMUX1_SYNC_DMAMUX1_CH3_EVT 19U /*!< Synchronization Signal is DMAMUX1 Channel3 Event */ +#define HAL_DMAMUX1_SYNC_LPTIM1_OUT 20U /*!< Synchronization Signal is LPTIM1 OUT */ +#define HAL_DMAMUX1_SYNC_LPTIM2_OUT 21U /*!< Synchronization Signal is LPTIM2 OUT */ +#if defined (STM32L4R5xx) || defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined (STM32L4S9xx) +#define HAL_DMAMUX1_SYNC_DSI_TE 22U /*!< Synchronization Signal is DSI Tearing Effect */ +#define HAL_DMAMUX1_SYNC_DSI_EOT 23U /*!< Synchronization Signal is DSI End of refresh */ +#endif /* STM32L4R5xx || STM32L4R7xx || STM32L4R9xx || STM32L4S5xx || STM32L4S7xx || STM32L4S9xx */ +#define HAL_DMAMUX1_SYNC_DMA2D_EOT 24U /*!< Synchronization Signal is DMA2D End of Transfer */ +#define HAL_DMAMUX1_SYNC_LDTC_IT 25U /*!< Synchronization Signal is LDTC IT */ + +/** + * @} + */ + +/** @defgroup DMAEx_DMAMUX_SyncPolarity_selection DMAMUX SyncPolarity selection + * @{ + */ +#define HAL_DMAMUX_SYNC_NO_EVENT 0U /*!< block synchronization events */ +#define HAL_DMAMUX_SYNC_RISING DMAMUX_CxCR_SPOL_0 /*!< synchronize with rising edge events */ +#define HAL_DMAMUX_SYNC_FALLING DMAMUX_CxCR_SPOL_1 /*!< synchronize with falling edge events */ +#define HAL_DMAMUX_SYNC_RISING_FALLING DMAMUX_CxCR_SPOL /*!< synchronize with rising and falling edge events */ + +/** + * @} + */ + +/** @defgroup DMAEx_DMAMUX_SignalGeneratorID_selection DMAMUX SignalGeneratorID selection + * @{ + */ + +#define HAL_DMAMUX1_REQ_GEN_EXTI0 0U /*!< Request generator Signal is EXTI0 IT */ +#define HAL_DMAMUX1_REQ_GEN_EXTI1 1U /*!< Request generator Signal is EXTI1 IT */ +#define HAL_DMAMUX1_REQ_GEN_EXTI2 2U /*!< Request generator Signal is EXTI2 IT */ +#define HAL_DMAMUX1_REQ_GEN_EXTI3 3U /*!< Request generator Signal is EXTI3 IT */ +#define HAL_DMAMUX1_REQ_GEN_EXTI4 4U /*!< Request generator Signal is EXTI4 IT */ +#define HAL_DMAMUX1_REQ_GEN_EXTI5 5U /*!< Request generator Signal is EXTI5 IT */ +#define HAL_DMAMUX1_REQ_GEN_EXTI6 6U /*!< Request generator Signal is EXTI6 IT */ +#define HAL_DMAMUX1_REQ_GEN_EXTI7 7U /*!< Request generator Signal is EXTI7 IT */ +#define HAL_DMAMUX1_REQ_GEN_EXTI8 8U /*!< Request generator Signal is EXTI8 IT */ +#define HAL_DMAMUX1_REQ_GEN_EXTI9 9U /*!< Request generator Signal is EXTI9 IT */ +#define HAL_DMAMUX1_REQ_GEN_EXTI10 10U /*!< Request generator Signal is EXTI10 IT */ +#define HAL_DMAMUX1_REQ_GEN_EXTI11 11U /*!< Request generator Signal is EXTI11 IT */ +#define HAL_DMAMUX1_REQ_GEN_EXTI12 12U /*!< Request generator Signal is EXTI12 IT */ +#define HAL_DMAMUX1_REQ_GEN_EXTI13 13U /*!< Request generator Signal is EXTI13 IT */ +#define HAL_DMAMUX1_REQ_GEN_EXTI14 14U /*!< Request generator Signal is EXTI14 IT */ +#define HAL_DMAMUX1_REQ_GEN_EXTI15 15U /*!< Request generator Signal is EXTI15 IT */ +#define HAL_DMAMUX1_REQ_GEN_DMAMUX1_CH0_EVT 16U /*!< Request generator Signal is DMAMUX1 Channel0 Event */ +#define HAL_DMAMUX1_REQ_GEN_DMAMUX1_CH1_EVT 17U /*!< Request generator Signal is DMAMUX1 Channel1 Event */ +#define HAL_DMAMUX1_REQ_GEN_DMAMUX1_CH2_EVT 18U /*!< Request generator Signal is DMAMUX1 Channel2 Event */ +#define HAL_DMAMUX1_REQ_GEN_DMAMUX1_CH3_EVT 19U /*!< Request generator Signal is DMAMUX1 Channel3 Event */ +#define HAL_DMAMUX1_REQ_GEN_LPTIM1_OUT 20U /*!< Request generator Signal is LPTIM1 OUT */ +#define HAL_DMAMUX1_REQ_GEN_LPTIM2_OUT 21U /*!< Request generator Signal is LPTIM2 OUT */ +#if defined (STM32L4R5xx) || defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined (STM32L4S9xx) +#define HAL_DMAMUX1_REQ_GEN_DSI_TE 22U /*!< Request generator Signal is DSI Tearing Effect */ +#define HAL_DMAMUX1_REQ_GEN_DSI_EOT 23U /*!< Request generator Signal is DSI End of refresh */ +#endif /* STM32L4R5xx || STM32L4R7xx || STM32L4R9xx || STM32L4S5xx || STM32L4S7xx || STM32L4S9xx */ +#define HAL_DMAMUX1_REQ_GEN_DMA2D_EOT 24U /*!< Request generator Signal is DMA2D End of Transfer */ +#define HAL_DMAMUX1_REQ_GEN_LTDC_IT 25U /*!< Request generator Signal is LTDC IT */ + +/** + * @} + */ + +/** @defgroup DMAEx_DMAMUX_RequestGeneneratorPolarity_selection DMAMUX RequestGeneneratorPolarity selection + * @{ + */ +#define HAL_DMAMUX_REQ_GEN_NO_EVENT 0U /*!< block request generator events */ +#define HAL_DMAMUX_REQ_GEN_RISING DMAMUX_RGxCR_GPOL_0 /*!< generate request on rising edge events */ +#define HAL_DMAMUX_REQ_GEN_FALLING DMAMUX_RGxCR_GPOL_1 /*!< generate request on falling edge events */ +#define HAL_DMAMUX_REQ_GEN_RISING_FALLING DMAMUX_RGxCR_GPOL /*!< generate request on rising and falling edge events */ + +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup DMAEx_Exported_Functions + * @{ + */ + +/* IO operation functions *****************************************************/ +/** @addtogroup DMAEx_Exported_Functions_Group1 + * @{ + */ + +/* ------------------------- REQUEST -----------------------------------------*/ +HAL_StatusTypeDef HAL_DMAEx_ConfigMuxRequestGenerator(DMA_HandleTypeDef *hdma, + HAL_DMA_MuxRequestGeneratorConfigTypeDef *pRequestGeneratorConfig); +HAL_StatusTypeDef HAL_DMAEx_EnableMuxRequestGenerator(DMA_HandleTypeDef *hdma); +HAL_StatusTypeDef HAL_DMAEx_DisableMuxRequestGenerator(DMA_HandleTypeDef *hdma); +/* -------------------------------------------------------------------------- */ + +/* ------------------------- SYNCHRO -----------------------------------------*/ +HAL_StatusTypeDef HAL_DMAEx_ConfigMuxSync(DMA_HandleTypeDef *hdma, HAL_DMA_MuxSyncConfigTypeDef *pSyncConfig); +/* -------------------------------------------------------------------------- */ + +void HAL_DMAEx_MUX_IRQHandler(DMA_HandleTypeDef *hdma); + +/** + * @} + */ + +/** + * @} + */ + + +/* Private defines -----------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +/** @defgroup DMAEx_Private_Macros DMAEx Private Macros + * @brief DMAEx private macros + * @{ + */ + +#define IS_DMAMUX_SYNC_SIGNAL_ID(SIGNAL_ID) ((SIGNAL_ID) <= HAL_DMAMUX1_SYNC_LDTC_IT) + +#define IS_DMAMUX_SYNC_REQUEST_NUMBER(REQUEST_NUMBER) (((REQUEST_NUMBER) > 0U) && ((REQUEST_NUMBER) <= 32U)) + +#define IS_DMAMUX_SYNC_POLARITY(POLARITY) (((POLARITY) == HAL_DMAMUX_SYNC_NO_EVENT) || \ + ((POLARITY) == HAL_DMAMUX_SYNC_RISING) || \ + ((POLARITY) == HAL_DMAMUX_SYNC_FALLING) || \ + ((POLARITY) == HAL_DMAMUX_SYNC_RISING_FALLING)) + +#define IS_DMAMUX_SYNC_STATE(SYNC) (((SYNC) == DISABLE) || ((SYNC) == ENABLE)) + +#define IS_DMAMUX_SYNC_EVENT(EVENT) (((EVENT) == DISABLE) || \ + ((EVENT) == ENABLE)) + +#define IS_DMAMUX_REQUEST_GEN_SIGNAL_ID(SIGNAL_ID) ((SIGNAL_ID) <= HAL_DMAMUX1_REQ_GEN_LTDC_IT) + +#define IS_DMAMUX_REQUEST_GEN_REQUEST_NUMBER(REQUEST_NUMBER) (((REQUEST_NUMBER) > 0U) && ((REQUEST_NUMBER) <= 32U)) + +#define IS_DMAMUX_REQUEST_GEN_POLARITY(POLARITY) (((POLARITY) == HAL_DMAMUX_REQ_GEN_NO_EVENT) || \ + ((POLARITY) == HAL_DMAMUX_REQ_GEN_RISING) || \ + ((POLARITY) == HAL_DMAMUX_REQ_GEN_FALLING) || \ + ((POLARITY) == HAL_DMAMUX_REQ_GEN_RISING_FALLING)) + +/** + * @} + */ + + +/** + * @} + */ + +/** + * @} + */ + +#endif /* DMAMUX1 */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32L4xx_HAL_DMA_H */ diff --git a/CablePositioning_IAP_V1.0/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_exti.h b/CablePositioning_IAP_V1.0/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_exti.h index d31c4c6..494e059 100644 --- a/CablePositioning_IAP_V1.0/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_exti.h +++ b/CablePositioning_IAP_V1.0/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_exti.h @@ -1,858 +1,858 @@ -/** - ****************************************************************************** - * @file stm32l4xx_hal_exti.h - * @author MCD Application Team - * @brief Header file of EXTI HAL module. - ****************************************************************************** - * @attention - * - * Copyright (c) 2018 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef STM32L4xx_HAL_EXTI_H -#define STM32L4xx_HAL_EXTI_H - -#ifdef __cplusplus -extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32l4xx_hal_def.h" - -/** @addtogroup STM32L4xx_HAL_Driver - * @{ - */ - -/** @defgroup EXTI EXTI - * @brief EXTI HAL module driver - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ - -/** @defgroup EXTI_Exported_Types EXTI Exported Types - * @{ - */ -typedef enum -{ - HAL_EXTI_COMMON_CB_ID = 0x00U, - HAL_EXTI_RISING_CB_ID = 0x01U, - HAL_EXTI_FALLING_CB_ID = 0x02U, -} EXTI_CallbackIDTypeDef; - - -/** - * @brief EXTI Handle structure definition - */ -typedef struct -{ - uint32_t Line; /*!< Exti line number */ - void (* PendingCallback)(void); /*!< Exti pending callback */ -} EXTI_HandleTypeDef; - -/** - * @brief EXTI Configuration structure definition - */ -typedef struct -{ - uint32_t Line; /*!< The Exti line to be configured. This parameter - can be a value of @ref EXTI_Line */ - uint32_t Mode; /*!< The Exit Mode to be configured for a core. - This parameter can be a combination of @ref EXTI_Mode */ - uint32_t Trigger; /*!< The Exti Trigger to be configured. This parameter - can be a value of @ref EXTI_Trigger */ - uint32_t GPIOSel; /*!< The Exti GPIO multiplexer selection to be configured. - This parameter is only possible for line 0 to 15. It - can be a value of @ref EXTI_GPIOSel */ -} EXTI_ConfigTypeDef; - -/** - * @} - */ - -/* Exported constants --------------------------------------------------------*/ -/** @defgroup EXTI_Exported_Constants EXTI Exported Constants - * @{ - */ - -/** @defgroup EXTI_Line EXTI Line - * @{ - */ -#if defined(STM32L412xx) || defined(STM32L422xx) - -#define EXTI_LINE_0 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x00u) -#define EXTI_LINE_1 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x01u) -#define EXTI_LINE_2 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x02u) -#define EXTI_LINE_3 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x03u) -#define EXTI_LINE_4 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x04u) -#define EXTI_LINE_5 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x05u) -#define EXTI_LINE_6 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x06u) -#define EXTI_LINE_7 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x07u) -#define EXTI_LINE_8 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x08u) -#define EXTI_LINE_9 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x09u) -#define EXTI_LINE_10 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Au) -#define EXTI_LINE_11 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Bu) -#define EXTI_LINE_12 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Cu) -#define EXTI_LINE_13 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Du) -#define EXTI_LINE_14 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Eu) -#define EXTI_LINE_15 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Fu) -#define EXTI_LINE_16 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x10u) -#define EXTI_LINE_17 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x11u) -#define EXTI_LINE_18 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x12u) -#define EXTI_LINE_19 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x13u) -#define EXTI_LINE_20 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x14u) -#define EXTI_LINE_21 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x15u) -#define EXTI_LINE_22 (EXTI_RESERVED | EXTI_REG1 | 0x16u) -#define EXTI_LINE_23 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x17u) -#define EXTI_LINE_24 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x18u) -#define EXTI_LINE_25 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x19u) -#define EXTI_LINE_26 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x1Au) -#define EXTI_LINE_27 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x1Bu) -#define EXTI_LINE_28 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x1Cu) -#define EXTI_LINE_29 (EXTI_RESERVED | EXTI_REG1 | 0x1Du) -#define EXTI_LINE_30 (EXTI_RESERVED | EXTI_REG1 | 0x1Eu) -#define EXTI_LINE_31 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x1Fu) -#define EXTI_LINE_32 (EXTI_DIRECT | EXTI_REG2 | EXTI_EVENT | 0x00u) -#define EXTI_LINE_33 (EXTI_DIRECT | EXTI_REG2 | EXTI_EVENT | 0x01u) -#define EXTI_LINE_34 (EXTI_RESERVED | EXTI_REG2 | 0x02u) -#define EXTI_LINE_35 (EXTI_CONFIG | EXTI_REG2 | EXTI_EVENT | 0x03u) -#define EXTI_LINE_36 (EXTI_RESERVED | EXTI_REG2 | 0x04u) -#define EXTI_LINE_37 (EXTI_CONFIG | EXTI_REG2 | EXTI_EVENT | 0x05u) -#define EXTI_LINE_38 (EXTI_CONFIG | EXTI_REG2 | EXTI_EVENT | 0x06u) -#define EXTI_LINE_39 (EXTI_RESERVED | EXTI_REG2 | 0x07u) -#define EXTI_LINE_40 (EXTI_RESERVED | EXTI_REG2 | 0x08u) - -#endif /* STM32L412xx || STM32L422xx */ - -#if defined(STM32L431xx) - -#define EXTI_LINE_0 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x00u) -#define EXTI_LINE_1 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x01u) -#define EXTI_LINE_2 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x02u) -#define EXTI_LINE_3 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x03u) -#define EXTI_LINE_4 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x04u) -#define EXTI_LINE_5 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x05u) -#define EXTI_LINE_6 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x06u) -#define EXTI_LINE_7 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x07u) -#define EXTI_LINE_8 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x08u) -#define EXTI_LINE_9 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x09u) -#define EXTI_LINE_10 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Au) -#define EXTI_LINE_11 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Bu) -#define EXTI_LINE_12 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Cu) -#define EXTI_LINE_13 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Du) -#define EXTI_LINE_14 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Eu) -#define EXTI_LINE_15 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Fu) -#define EXTI_LINE_16 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x10u) -#define EXTI_LINE_17 (EXTI_RESERVED | EXTI_REG1 | 0x11u) -#define EXTI_LINE_18 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x12u) -#define EXTI_LINE_19 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x13u) -#define EXTI_LINE_20 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x14u) -#define EXTI_LINE_21 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x15u) -#define EXTI_LINE_22 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x16u) -#define EXTI_LINE_23 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x17u) -#define EXTI_LINE_24 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x18u) -#define EXTI_LINE_25 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x19u) -#define EXTI_LINE_26 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x1Au) -#define EXTI_LINE_27 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x1Bu) -#define EXTI_LINE_28 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x1Cu) -#define EXTI_LINE_29 (EXTI_RESERVED | EXTI_REG1 | 0x1Du) -#define EXTI_LINE_30 (EXTI_RESERVED | EXTI_REG1 | 0x1Eu) -#define EXTI_LINE_31 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x1Fu) -#define EXTI_LINE_32 (EXTI_DIRECT | EXTI_REG2 | EXTI_EVENT | 0x00u) -#define EXTI_LINE_33 (EXTI_DIRECT | EXTI_REG2 | EXTI_EVENT | 0x01u) -#define EXTI_LINE_34 (EXTI_DIRECT | EXTI_REG2 | EXTI_EVENT | 0x02u) -#define EXTI_LINE_35 (EXTI_RESERVED | EXTI_REG2 | 0x03u) -#define EXTI_LINE_36 (EXTI_RESERVED | EXTI_REG2 | 0x04u) -#define EXTI_LINE_37 (EXTI_CONFIG | EXTI_REG2 | EXTI_EVENT | 0x05u) -#define EXTI_LINE_38 (EXTI_CONFIG | EXTI_REG2 | EXTI_EVENT | 0x06u) -#define EXTI_LINE_39 (EXTI_RESERVED | EXTI_REG2 | 0x07u) -#define EXTI_LINE_40 (EXTI_RESERVED | EXTI_REG2 | 0x08u) - -#endif /* STM32L431xx */ - -#if defined(STM32L432xx) || defined(STM32L442xx) - -#define EXTI_LINE_0 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x00u) -#define EXTI_LINE_1 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x01u) -#define EXTI_LINE_2 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x02u) -#define EXTI_LINE_3 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x03u) -#define EXTI_LINE_4 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x04u) -#define EXTI_LINE_5 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x05u) -#define EXTI_LINE_6 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x06u) -#define EXTI_LINE_7 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x07u) -#define EXTI_LINE_8 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x08u) -#define EXTI_LINE_9 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x09u) -#define EXTI_LINE_10 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Au) -#define EXTI_LINE_11 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Bu) -#define EXTI_LINE_12 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Cu) -#define EXTI_LINE_13 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Du) -#define EXTI_LINE_14 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Eu) -#define EXTI_LINE_15 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Fu) -#define EXTI_LINE_16 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x10u) -#define EXTI_LINE_17 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x11u) -#define EXTI_LINE_18 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x12u) -#define EXTI_LINE_19 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x13u) -#define EXTI_LINE_20 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x14u) -#define EXTI_LINE_21 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x15u) -#define EXTI_LINE_22 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x16u) -#define EXTI_LINE_23 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x17u) -#define EXTI_LINE_24 (EXTI_RESERVED | EXTI_REG1 | 0x18u) -#define EXTI_LINE_25 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x19u) -#define EXTI_LINE_26 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x1Au) -#define EXTI_LINE_27 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x1Bu) -#define EXTI_LINE_28 (EXTI_RESERVED | EXTI_REG1 | 0x1Cu) -#define EXTI_LINE_29 (EXTI_RESERVED | EXTI_REG1 | 0x1Du) -#define EXTI_LINE_30 (EXTI_RESERVED | EXTI_REG1 | 0x1Eu) -#define EXTI_LINE_31 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x1Fu) -#define EXTI_LINE_32 (EXTI_DIRECT | EXTI_REG2 | EXTI_EVENT | 0x00u) -#define EXTI_LINE_33 (EXTI_DIRECT | EXTI_REG2 | EXTI_EVENT | 0x01u) -#define EXTI_LINE_34 (EXTI_DIRECT | EXTI_REG2 | EXTI_EVENT | 0x02u) -#define EXTI_LINE_35 (EXTI_CONFIG | EXTI_REG2 | EXTI_EVENT | 0x03u) -#define EXTI_LINE_36 (EXTI_RESERVED | EXTI_REG2 | 0x04u) -#define EXTI_LINE_37 (EXTI_CONFIG | EXTI_REG2 | EXTI_EVENT | 0x05u) -#define EXTI_LINE_38 (EXTI_CONFIG | EXTI_REG2 | EXTI_EVENT | 0x06u) -#define EXTI_LINE_39 (EXTI_DIRECT | EXTI_REG2 | EXTI_EVENT | 0x07u) -#define EXTI_LINE_40 (EXTI_RESERVED | EXTI_REG2 | 0x08u) - -#endif /* STM32L432xx || STM32L442xx */ - -#if defined(STM32L433xx) || defined(STM32L443xx) - -#define EXTI_LINE_0 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x00u) -#define EXTI_LINE_1 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x01u) -#define EXTI_LINE_2 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x02u) -#define EXTI_LINE_3 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x03u) -#define EXTI_LINE_4 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x04u) -#define EXTI_LINE_5 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x05u) -#define EXTI_LINE_6 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x06u) -#define EXTI_LINE_7 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x07u) -#define EXTI_LINE_8 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x08u) -#define EXTI_LINE_9 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x09u) -#define EXTI_LINE_10 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Au) -#define EXTI_LINE_11 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Bu) -#define EXTI_LINE_12 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Cu) -#define EXTI_LINE_13 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Du) -#define EXTI_LINE_14 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Eu) -#define EXTI_LINE_15 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Fu) -#define EXTI_LINE_16 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x10u) -#define EXTI_LINE_17 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x11u) -#define EXTI_LINE_18 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x12u) -#define EXTI_LINE_19 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x13u) -#define EXTI_LINE_20 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x14u) -#define EXTI_LINE_21 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x15u) -#define EXTI_LINE_22 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x16u) -#define EXTI_LINE_23 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x17u) -#define EXTI_LINE_24 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x18u) -#define EXTI_LINE_25 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x19u) -#define EXTI_LINE_26 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x1Au) -#define EXTI_LINE_27 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x1Bu) -#define EXTI_LINE_28 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x1Cu) -#define EXTI_LINE_29 (EXTI_RESERVED | EXTI_REG1 | 0x1Du) -#define EXTI_LINE_30 (EXTI_RESERVED | EXTI_REG1 | 0x1Eu) -#define EXTI_LINE_31 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x1Fu) -#define EXTI_LINE_32 (EXTI_DIRECT | EXTI_REG2 | EXTI_EVENT | 0x00u) -#define EXTI_LINE_33 (EXTI_DIRECT | EXTI_REG2 | EXTI_EVENT | 0x01u) -#define EXTI_LINE_34 (EXTI_DIRECT | EXTI_REG2 | EXTI_EVENT | 0x02u) -#define EXTI_LINE_35 (EXTI_CONFIG | EXTI_REG2 | EXTI_EVENT | 0x03u) -#define EXTI_LINE_36 (EXTI_RESERVED | EXTI_REG2 | 0x04u) -#define EXTI_LINE_37 (EXTI_CONFIG | EXTI_REG2 | EXTI_EVENT | 0x05u) -#define EXTI_LINE_38 (EXTI_CONFIG | EXTI_REG2 | EXTI_EVENT | 0x06u) -#define EXTI_LINE_39 (EXTI_DIRECT | EXTI_REG2 | EXTI_EVENT | 0x07u) -#define EXTI_LINE_40 (EXTI_RESERVED | EXTI_REG2 | 0x08u) - -#endif /* STM32L433xx || STM32L443xx */ - -#if defined(STM32L451xx) - -#define EXTI_LINE_0 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x00u) -#define EXTI_LINE_1 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x01u) -#define EXTI_LINE_2 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x02u) -#define EXTI_LINE_3 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x03u) -#define EXTI_LINE_4 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x04u) -#define EXTI_LINE_5 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x05u) -#define EXTI_LINE_6 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x06u) -#define EXTI_LINE_7 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x07u) -#define EXTI_LINE_8 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x08u) -#define EXTI_LINE_9 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x09u) -#define EXTI_LINE_10 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Au) -#define EXTI_LINE_11 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Bu) -#define EXTI_LINE_12 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Cu) -#define EXTI_LINE_13 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Du) -#define EXTI_LINE_14 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Eu) -#define EXTI_LINE_15 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Fu) -#define EXTI_LINE_16 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x10u) -#define EXTI_LINE_17 (EXTI_RESERVED | EXTI_REG1 | 0x11u) -#define EXTI_LINE_18 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x12u) -#define EXTI_LINE_19 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x13u) -#define EXTI_LINE_20 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x14u) -#define EXTI_LINE_21 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x15u) -#define EXTI_LINE_22 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x16u) -#define EXTI_LINE_23 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x17u) -#define EXTI_LINE_24 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x18u) -#define EXTI_LINE_25 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x19u) -#define EXTI_LINE_26 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x1Au) -#define EXTI_LINE_27 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x1Bu) -#define EXTI_LINE_28 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x1Cu) -#define EXTI_LINE_29 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x1Du) -#define EXTI_LINE_30 (EXTI_RESERVED | EXTI_REG1 | 0x1Eu) -#define EXTI_LINE_31 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x1Fu) -#define EXTI_LINE_32 (EXTI_DIRECT | EXTI_REG2 | EXTI_EVENT | 0x00u) -#define EXTI_LINE_33 (EXTI_DIRECT | EXTI_REG2 | EXTI_EVENT | 0x01u) -#define EXTI_LINE_34 (EXTI_RESERVED | EXTI_REG2 | 0x02u) -#define EXTI_LINE_35 (EXTI_RESERVED | EXTI_REG2 | 0x03u) -#define EXTI_LINE_36 (EXTI_RESERVED | EXTI_REG2 | 0x04u) -#define EXTI_LINE_37 (EXTI_CONFIG | EXTI_REG2 | EXTI_EVENT | 0x05u) -#define EXTI_LINE_38 (EXTI_CONFIG | EXTI_REG2 | EXTI_EVENT | 0x06u) -#define EXTI_LINE_39 (EXTI_RESERVED | EXTI_REG2 | 0x07u) -#define EXTI_LINE_40 (EXTI_DIRECT | EXTI_REG2 | EXTI_EVENT | 0x08u) - -#endif /* STM32L451xx */ - -#if defined(STM32L452xx) || defined(STM32L462xx) - -#define EXTI_LINE_0 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x00u) -#define EXTI_LINE_1 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x01u) -#define EXTI_LINE_2 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x02u) -#define EXTI_LINE_3 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x03u) -#define EXTI_LINE_4 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x04u) -#define EXTI_LINE_5 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x05u) -#define EXTI_LINE_6 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x06u) -#define EXTI_LINE_7 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x07u) -#define EXTI_LINE_8 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x08u) -#define EXTI_LINE_9 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x09u) -#define EXTI_LINE_10 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Au) -#define EXTI_LINE_11 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Bu) -#define EXTI_LINE_12 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Cu) -#define EXTI_LINE_13 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Du) -#define EXTI_LINE_14 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Eu) -#define EXTI_LINE_15 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Fu) -#define EXTI_LINE_16 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x10u) -#define EXTI_LINE_17 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x11u) -#define EXTI_LINE_18 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x12u) -#define EXTI_LINE_19 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x13u) -#define EXTI_LINE_20 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x14u) -#define EXTI_LINE_21 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x15u) -#define EXTI_LINE_22 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x16u) -#define EXTI_LINE_23 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x17u) -#define EXTI_LINE_24 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x18u) -#define EXTI_LINE_25 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x19u) -#define EXTI_LINE_26 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x1Au) -#define EXTI_LINE_27 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x1Bu) -#define EXTI_LINE_28 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x1Cu) -#define EXTI_LINE_29 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x1Du) -#define EXTI_LINE_30 (EXTI_RESERVED | EXTI_REG1 | 0x1Eu) -#define EXTI_LINE_31 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x1Fu) -#define EXTI_LINE_32 (EXTI_DIRECT | EXTI_REG2 | EXTI_EVENT | 0x00u) -#define EXTI_LINE_33 (EXTI_DIRECT | EXTI_REG2 | EXTI_EVENT | 0x01u) -#define EXTI_LINE_34 (EXTI_RESERVED | EXTI_REG2 | 0x02u) -#define EXTI_LINE_35 (EXTI_CONFIG | EXTI_REG2 | EXTI_EVENT | 0x03u) -#define EXTI_LINE_36 (EXTI_RESERVED | EXTI_REG2 | 0x04u) -#define EXTI_LINE_37 (EXTI_CONFIG | EXTI_REG2 | EXTI_EVENT | 0x05u) -#define EXTI_LINE_38 (EXTI_CONFIG | EXTI_REG2 | EXTI_EVENT | 0x06u) -#define EXTI_LINE_39 (EXTI_RESERVED | EXTI_REG2 | 0x07u) -#define EXTI_LINE_40 (EXTI_DIRECT | EXTI_REG2 | EXTI_EVENT | 0x08u) - -#endif /* STM32L452xx || STM32L462xx */ - -#if defined(STM32L471xx) - -#define EXTI_LINE_0 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x00u) -#define EXTI_LINE_1 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x01u) -#define EXTI_LINE_2 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x02u) -#define EXTI_LINE_3 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x03u) -#define EXTI_LINE_4 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x04u) -#define EXTI_LINE_5 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x05u) -#define EXTI_LINE_6 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x06u) -#define EXTI_LINE_7 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x07u) -#define EXTI_LINE_8 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x08u) -#define EXTI_LINE_9 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x09u) -#define EXTI_LINE_10 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Au) -#define EXTI_LINE_11 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Bu) -#define EXTI_LINE_12 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Cu) -#define EXTI_LINE_13 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Du) -#define EXTI_LINE_14 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Eu) -#define EXTI_LINE_15 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Fu) -#define EXTI_LINE_16 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x10u) -#define EXTI_LINE_17 (EXTI_RESERVED | EXTI_REG1 | 0x11u) -#define EXTI_LINE_18 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x12u) -#define EXTI_LINE_19 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x13u) -#define EXTI_LINE_20 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x14u) -#define EXTI_LINE_21 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x15u) -#define EXTI_LINE_22 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x16u) -#define EXTI_LINE_23 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x17u) -#define EXTI_LINE_24 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x18u) -#define EXTI_LINE_25 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x19u) -#define EXTI_LINE_26 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x1Au) -#define EXTI_LINE_27 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x1Bu) -#define EXTI_LINE_28 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x1Cu) -#define EXTI_LINE_29 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x1Du) -#define EXTI_LINE_30 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x1Eu) -#define EXTI_LINE_31 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x1Fu) -#define EXTI_LINE_32 (EXTI_DIRECT | EXTI_REG2 | EXTI_EVENT | 0x00u) -#define EXTI_LINE_33 (EXTI_DIRECT | EXTI_REG2 | EXTI_EVENT | 0x01u) -#define EXTI_LINE_34 (EXTI_CONFIG | EXTI_REG2 | EXTI_EVENT | 0x02u) -#define EXTI_LINE_35 (EXTI_RESERVED | EXTI_REG2 | 0x03u) -#define EXTI_LINE_36 (EXTI_CONFIG | EXTI_REG2 | EXTI_EVENT | 0x04u) -#define EXTI_LINE_37 (EXTI_CONFIG | EXTI_REG2 | EXTI_EVENT | 0x05u) -#define EXTI_LINE_38 (EXTI_CONFIG | EXTI_REG2 | EXTI_EVENT | 0x06u) -#define EXTI_LINE_39 (EXTI_RESERVED | EXTI_REG2 | 0x07u) -#define EXTI_LINE_40 (EXTI_RESERVED | EXTI_REG2 | 0x08u) - -#endif /* STM32L471xx */ - -#if defined(STM32L475xx) || defined(STM32L485xx) - -#define EXTI_LINE_0 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x00u) -#define EXTI_LINE_1 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x01u) -#define EXTI_LINE_2 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x02u) -#define EXTI_LINE_3 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x03u) -#define EXTI_LINE_4 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x04u) -#define EXTI_LINE_5 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x05u) -#define EXTI_LINE_6 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x06u) -#define EXTI_LINE_7 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x07u) -#define EXTI_LINE_8 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x08u) -#define EXTI_LINE_9 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x09u) -#define EXTI_LINE_10 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Au) -#define EXTI_LINE_11 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Bu) -#define EXTI_LINE_12 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Cu) -#define EXTI_LINE_13 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Du) -#define EXTI_LINE_14 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Eu) -#define EXTI_LINE_15 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Fu) -#define EXTI_LINE_16 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x10u) -#define EXTI_LINE_17 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x11u) -#define EXTI_LINE_18 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x12u) -#define EXTI_LINE_19 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x13u) -#define EXTI_LINE_20 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x14u) -#define EXTI_LINE_21 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x15u) -#define EXTI_LINE_22 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x16u) -#define EXTI_LINE_23 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x17u) -#define EXTI_LINE_24 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x18u) -#define EXTI_LINE_25 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x19u) -#define EXTI_LINE_26 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x1Au) -#define EXTI_LINE_27 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x1Bu) -#define EXTI_LINE_28 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x1Cu) -#define EXTI_LINE_29 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x1Du) -#define EXTI_LINE_30 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x1Eu) -#define EXTI_LINE_31 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x1Fu) -#define EXTI_LINE_32 (EXTI_DIRECT | EXTI_REG2 | EXTI_EVENT | 0x00u) -#define EXTI_LINE_33 (EXTI_DIRECT | EXTI_REG2 | EXTI_EVENT | 0x01u) -#define EXTI_LINE_34 (EXTI_CONFIG | EXTI_REG2 | EXTI_EVENT | 0x02u) -#define EXTI_LINE_35 (EXTI_CONFIG | EXTI_REG2 | EXTI_EVENT | 0x03u) -#define EXTI_LINE_36 (EXTI_CONFIG | EXTI_REG2 | EXTI_EVENT | 0x04u) -#define EXTI_LINE_37 (EXTI_CONFIG | EXTI_REG2 | EXTI_EVENT | 0x05u) -#define EXTI_LINE_38 (EXTI_CONFIG | EXTI_REG2 | EXTI_EVENT | 0x06u) -#define EXTI_LINE_39 (EXTI_RESERVED | EXTI_REG2 | 0x07u) -#define EXTI_LINE_40 (EXTI_RESERVED | EXTI_REG2 | 0x08u) - -#endif /* STM32L475xx || STM32L485xx */ - -#if defined(STM32L476xx) || defined(STM32L486xx) - -#define EXTI_LINE_0 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x00u) -#define EXTI_LINE_1 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x01u) -#define EXTI_LINE_2 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x02u) -#define EXTI_LINE_3 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x03u) -#define EXTI_LINE_4 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x04u) -#define EXTI_LINE_5 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x05u) -#define EXTI_LINE_6 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x06u) -#define EXTI_LINE_7 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x07u) -#define EXTI_LINE_8 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x08u) -#define EXTI_LINE_9 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x09u) -#define EXTI_LINE_10 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Au) -#define EXTI_LINE_11 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Bu) -#define EXTI_LINE_12 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Cu) -#define EXTI_LINE_13 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Du) -#define EXTI_LINE_14 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Eu) -#define EXTI_LINE_15 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Fu) -#define EXTI_LINE_16 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x10u) -#define EXTI_LINE_17 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x11u) -#define EXTI_LINE_18 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x12u) -#define EXTI_LINE_19 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x13u) -#define EXTI_LINE_20 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x14u) -#define EXTI_LINE_21 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x15u) -#define EXTI_LINE_22 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x16u) -#define EXTI_LINE_23 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x17u) -#define EXTI_LINE_24 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x18u) -#define EXTI_LINE_25 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x19u) -#define EXTI_LINE_26 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x1Au) -#define EXTI_LINE_27 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x1Bu) -#define EXTI_LINE_28 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x1Cu) -#define EXTI_LINE_29 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x1Du) -#define EXTI_LINE_30 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x1Eu) -#define EXTI_LINE_31 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x1Fu) -#define EXTI_LINE_32 (EXTI_DIRECT | EXTI_REG2 | EXTI_EVENT | 0x00u) -#define EXTI_LINE_33 (EXTI_DIRECT | EXTI_REG2 | EXTI_EVENT | 0x01u) -#define EXTI_LINE_34 (EXTI_CONFIG | EXTI_REG2 | EXTI_EVENT | 0x02u) -#define EXTI_LINE_35 (EXTI_CONFIG | EXTI_REG2 | EXTI_EVENT | 0x03u) -#define EXTI_LINE_36 (EXTI_CONFIG | EXTI_REG2 | EXTI_EVENT | 0x04u) -#define EXTI_LINE_37 (EXTI_CONFIG | EXTI_REG2 | EXTI_EVENT | 0x05u) -#define EXTI_LINE_38 (EXTI_CONFIG | EXTI_REG2 | EXTI_EVENT | 0x06u) -#define EXTI_LINE_39 (EXTI_DIRECT | EXTI_REG2 | EXTI_EVENT | 0x07u) -#define EXTI_LINE_40 (EXTI_RESERVED | EXTI_REG2 | 0x08u) - -#endif /* STM32L476xx || STM32L486xx */ - -#if defined(STM32L496xx) || defined(STM32L4A6xx) - -#define EXTI_LINE_0 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x00u) -#define EXTI_LINE_1 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x01u) -#define EXTI_LINE_2 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x02u) -#define EXTI_LINE_3 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x03u) -#define EXTI_LINE_4 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x04u) -#define EXTI_LINE_5 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x05u) -#define EXTI_LINE_6 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x06u) -#define EXTI_LINE_7 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x07u) -#define EXTI_LINE_8 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x08u) -#define EXTI_LINE_9 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x09u) -#define EXTI_LINE_10 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Au) -#define EXTI_LINE_11 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Bu) -#define EXTI_LINE_12 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Cu) -#define EXTI_LINE_13 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Du) -#define EXTI_LINE_14 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Eu) -#define EXTI_LINE_15 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Fu) -#define EXTI_LINE_16 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x10u) -#define EXTI_LINE_17 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x11u) -#define EXTI_LINE_18 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x12u) -#define EXTI_LINE_19 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x13u) -#define EXTI_LINE_20 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x14u) -#define EXTI_LINE_21 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x15u) -#define EXTI_LINE_22 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x16u) -#define EXTI_LINE_23 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x17u) -#define EXTI_LINE_24 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x18u) -#define EXTI_LINE_25 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x19u) -#define EXTI_LINE_26 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x1Au) -#define EXTI_LINE_27 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x1Bu) -#define EXTI_LINE_28 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x1Cu) -#define EXTI_LINE_29 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x1Du) -#define EXTI_LINE_30 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x1Eu) -#define EXTI_LINE_31 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x1Fu) -#define EXTI_LINE_32 (EXTI_DIRECT | EXTI_REG2 | EXTI_EVENT | 0x00u) -#define EXTI_LINE_33 (EXTI_DIRECT | EXTI_REG2 | EXTI_EVENT | 0x01u) -#define EXTI_LINE_34 (EXTI_DIRECT | EXTI_REG2 | EXTI_EVENT | 0x02u) -#define EXTI_LINE_35 (EXTI_CONFIG | EXTI_REG2 | EXTI_EVENT | 0x03u) -#define EXTI_LINE_36 (EXTI_CONFIG | EXTI_REG2 | EXTI_EVENT | 0x04u) -#define EXTI_LINE_37 (EXTI_CONFIG | EXTI_REG2 | EXTI_EVENT | 0x05u) -#define EXTI_LINE_38 (EXTI_CONFIG | EXTI_REG2 | EXTI_EVENT | 0x06u) -#define EXTI_LINE_39 (EXTI_DIRECT | EXTI_REG2 | EXTI_EVENT | 0x07u) -#define EXTI_LINE_40 (EXTI_DIRECT | EXTI_REG2 | EXTI_EVENT | 0x08u) - -#endif /* STM32L496xx || STM32L4A6xx */ - -#if defined (STM32L4P5xx) || defined (STM32L4Q5xx) || defined (STM32L4R5xx) || defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined (STM32L4S9xx) - -#define EXTI_LINE_0 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x00u) -#define EXTI_LINE_1 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x01u) -#define EXTI_LINE_2 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x02u) -#define EXTI_LINE_3 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x03u) -#define EXTI_LINE_4 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x04u) -#define EXTI_LINE_5 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x05u) -#define EXTI_LINE_6 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x06u) -#define EXTI_LINE_7 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x07u) -#define EXTI_LINE_8 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x08u) -#define EXTI_LINE_9 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x09u) -#define EXTI_LINE_10 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Au) -#define EXTI_LINE_11 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Bu) -#define EXTI_LINE_12 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Cu) -#define EXTI_LINE_13 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Du) -#define EXTI_LINE_14 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Eu) -#define EXTI_LINE_15 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Fu) -#define EXTI_LINE_16 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x10u) -#define EXTI_LINE_17 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x11u) -#define EXTI_LINE_18 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x12u) -#define EXTI_LINE_19 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x13u) -#define EXTI_LINE_20 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x14u) -#define EXTI_LINE_21 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x15u) -#define EXTI_LINE_22 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x16u) -#define EXTI_LINE_23 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x17u) -#define EXTI_LINE_24 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x18u) -#define EXTI_LINE_25 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x19u) -#define EXTI_LINE_26 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x1Au) -#define EXTI_LINE_27 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x1Bu) -#define EXTI_LINE_28 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x1Cu) -#define EXTI_LINE_29 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x1Du) -#define EXTI_LINE_30 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x1Eu) -#define EXTI_LINE_31 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x1Fu) -#define EXTI_LINE_32 (EXTI_DIRECT | EXTI_REG2 | EXTI_EVENT | 0x00u) -#define EXTI_LINE_33 (EXTI_DIRECT | EXTI_REG2 | EXTI_EVENT | 0x01u) -#define EXTI_LINE_34 (EXTI_RESERVED | EXTI_REG2 | 0x02u) -#define EXTI_LINE_35 (EXTI_CONFIG | EXTI_REG2 | EXTI_EVENT | 0x03u) -#define EXTI_LINE_36 (EXTI_CONFIG | EXTI_REG2 | EXTI_EVENT | 0x04u) -#define EXTI_LINE_37 (EXTI_CONFIG | EXTI_REG2 | EXTI_EVENT | 0x05u) -#define EXTI_LINE_38 (EXTI_CONFIG | EXTI_REG2 | EXTI_EVENT | 0x06u) -#define EXTI_LINE_39 (EXTI_RESERVED | EXTI_REG2 | 0x07u) -#define EXTI_LINE_40 (EXTI_DIRECT | EXTI_REG2 | EXTI_EVENT | 0x08u) - -#endif /* STM32L4P5xx || STM32L4Q5xx || STM32L4R5xx || STM32L4R7xx || STM32L4R9xx || STM32L4S5xx || STM32L4S7xx || STM32L4S9xx */ - -/** - * @} - */ - -/** @defgroup EXTI_Mode EXTI Mode - * @{ - */ -#define EXTI_MODE_NONE 0x00000000u -#define EXTI_MODE_INTERRUPT 0x00000001u -#define EXTI_MODE_EVENT 0x00000002u -/** - * @} - */ - -/** @defgroup EXTI_Trigger EXTI Trigger - * @{ - */ -#define EXTI_TRIGGER_NONE 0x00000000u -#define EXTI_TRIGGER_RISING 0x00000001u -#define EXTI_TRIGGER_FALLING 0x00000002u -#define EXTI_TRIGGER_RISING_FALLING (EXTI_TRIGGER_RISING | EXTI_TRIGGER_FALLING) -/** - * @} - */ - -/** @defgroup EXTI_GPIOSel EXTI GPIOSel - * @brief - * @{ - */ -#define EXTI_GPIOA 0x00000000u -#define EXTI_GPIOB 0x00000001u -#define EXTI_GPIOC 0x00000002u -#define EXTI_GPIOD 0x00000003u -#define EXTI_GPIOE 0x00000004u -#define EXTI_GPIOF 0x00000005u -#define EXTI_GPIOG 0x00000006u -#define EXTI_GPIOH 0x00000007u -#define EXTI_GPIOI 0x00000008u -/** - * @} - */ - -/** - * @} - */ - -/* Exported macro ------------------------------------------------------------*/ -/** @defgroup EXTI_Exported_Macros EXTI Exported Macros - * @{ - */ - -/** - * @} - */ - -/* Private constants --------------------------------------------------------*/ -/** @defgroup EXTI_Private_Constants EXTI Private Constants - * @{ - */ -/** - * @brief EXTI Line property definition - */ -#define EXTI_PROPERTY_SHIFT 24u -#define EXTI_DIRECT (0x01uL << EXTI_PROPERTY_SHIFT) -#define EXTI_CONFIG (0x02uL << EXTI_PROPERTY_SHIFT) -#define EXTI_GPIO ((0x04uL << EXTI_PROPERTY_SHIFT) | EXTI_CONFIG) -#define EXTI_RESERVED (0x08uL << EXTI_PROPERTY_SHIFT) -#define EXTI_PROPERTY_MASK (EXTI_DIRECT | EXTI_CONFIG | EXTI_GPIO) - -/** - * @brief EXTI Event presence definition - */ -#define EXTI_EVENT_PRESENCE_SHIFT 28u -#define EXTI_EVENT (0x01uL << EXTI_EVENT_PRESENCE_SHIFT) -#define EXTI_EVENT_PRESENCE_MASK (EXTI_EVENT) - -/** - * @brief EXTI Register and bit usage - */ -#define EXTI_REG_SHIFT 16u -#define EXTI_REG1 (0x00uL << EXTI_REG_SHIFT) -#define EXTI_REG2 (0x01uL << EXTI_REG_SHIFT) -#define EXTI_REG_MASK (EXTI_REG1 | EXTI_REG2) -#define EXTI_PIN_MASK 0x0000001Fu - -/** - * @brief EXTI Mask for interrupt & event mode - */ -#define EXTI_MODE_MASK (EXTI_MODE_EVENT | EXTI_MODE_INTERRUPT) - -/** - * @brief EXTI Mask for trigger possibilities - */ -#define EXTI_TRIGGER_MASK (EXTI_TRIGGER_RISING | EXTI_TRIGGER_FALLING) - -/** - * @brief EXTI Line number - */ -#define EXTI_LINE_NB 41u - -/** - * @} - */ - -/* Private macros ------------------------------------------------------------*/ -/** @defgroup EXTI_Private_Macros EXTI Private Macros - * @{ - */ -#define IS_EXTI_LINE(__EXTI_LINE__) ((((__EXTI_LINE__) & ~(EXTI_PROPERTY_MASK | EXTI_EVENT_PRESENCE_MASK | EXTI_REG_MASK | EXTI_PIN_MASK)) == 0x00u) && \ - ((((__EXTI_LINE__) & EXTI_PROPERTY_MASK) == EXTI_DIRECT) || \ - (((__EXTI_LINE__) & EXTI_PROPERTY_MASK) == EXTI_CONFIG) || \ - (((__EXTI_LINE__) & EXTI_PROPERTY_MASK) == EXTI_GPIO)) && \ - (((__EXTI_LINE__) & (EXTI_REG_MASK | EXTI_PIN_MASK)) < \ - (((EXTI_LINE_NB / 32u) << EXTI_REG_SHIFT) | (EXTI_LINE_NB % 32u)))) - -#define IS_EXTI_MODE(__EXTI_LINE__) ((((__EXTI_LINE__) & EXTI_MODE_MASK) != 0x00u) && \ - (((__EXTI_LINE__) & ~EXTI_MODE_MASK) == 0x00u)) - -#define IS_EXTI_TRIGGER(__EXTI_LINE__) (((__EXTI_LINE__) & ~EXTI_TRIGGER_MASK) == 0x00u) - -#define IS_EXTI_PENDING_EDGE(__EXTI_LINE__) ((__EXTI_LINE__) == EXTI_TRIGGER_RISING_FALLING) - -#define IS_EXTI_CONFIG_LINE(__EXTI_LINE__) (((__EXTI_LINE__) & EXTI_CONFIG) != 0x00u) - -#if defined(STM32L412xx) || defined(STM32L422xx) - -#define IS_EXTI_GPIO_PORT(__PORT__) (((__PORT__) == EXTI_GPIOA) || \ - ((__PORT__) == EXTI_GPIOB) || \ - ((__PORT__) == EXTI_GPIOC) || \ - ((__PORT__) == EXTI_GPIOD) || \ - ((__PORT__) == EXTI_GPIOH)) - -#endif /* STM32L412xx || STM32L422xx */ - -#if defined(STM32L431xx) || defined(STM32L433xx) || defined(STM32L443xx) - -#define IS_EXTI_GPIO_PORT(__PORT__) (((__PORT__) == EXTI_GPIOA) || \ - ((__PORT__) == EXTI_GPIOB) || \ - ((__PORT__) == EXTI_GPIOC) || \ - ((__PORT__) == EXTI_GPIOD) || \ - ((__PORT__) == EXTI_GPIOE) || \ - ((__PORT__) == EXTI_GPIOH)) - -#endif /* STM32L431xx || STM32L433xx || STM32L443xx */ - -#if defined(STM32L432xx) || defined(STM32L442xx) - -#define IS_EXTI_GPIO_PORT(__PORT__) (((__PORT__) == EXTI_GPIOA) || \ - ((__PORT__) == EXTI_GPIOB) || \ - ((__PORT__) == EXTI_GPIOC) || \ - ((__PORT__) == EXTI_GPIOH)) - -#endif /* STM32L432xx || STM32L442xx */ - -#if defined(STM32L451xx) || defined(STM32L452xx) || defined(STM32L462xx) - -#define IS_EXTI_GPIO_PORT(__PORT__) (((__PORT__) == EXTI_GPIOA) || \ - ((__PORT__) == EXTI_GPIOB) || \ - ((__PORT__) == EXTI_GPIOC) || \ - ((__PORT__) == EXTI_GPIOD) || \ - ((__PORT__) == EXTI_GPIOE) || \ - ((__PORT__) == EXTI_GPIOH)) - -#endif /* STM32L451xx || STM32L452xx || STM32L462xx */ - -#if defined(STM32L471xx) || defined(STM32L475xx) || defined(STM32L476xx) || defined(STM32L485xx) || defined(STM32L486xx) - -#define IS_EXTI_GPIO_PORT(__PORT__) (((__PORT__) == EXTI_GPIOA) || \ - ((__PORT__) == EXTI_GPIOB) || \ - ((__PORT__) == EXTI_GPIOC) || \ - ((__PORT__) == EXTI_GPIOD) || \ - ((__PORT__) == EXTI_GPIOE) || \ - ((__PORT__) == EXTI_GPIOF) || \ - ((__PORT__) == EXTI_GPIOG) || \ - ((__PORT__) == EXTI_GPIOH)) - -#endif /* STM32L471xx || STM32L475xx || STM32L476xx || STM32L485xx || STM32L486xx */ - -#if defined(STM32L496xx) || defined(STM32L4A6xx) - -#define IS_EXTI_GPIO_PORT(__PORT__) (((__PORT__) == EXTI_GPIOA) || \ - ((__PORT__) == EXTI_GPIOB) || \ - ((__PORT__) == EXTI_GPIOC) || \ - ((__PORT__) == EXTI_GPIOD) || \ - ((__PORT__) == EXTI_GPIOE) || \ - ((__PORT__) == EXTI_GPIOF) || \ - ((__PORT__) == EXTI_GPIOG) || \ - ((__PORT__) == EXTI_GPIOH) || \ - ((__PORT__) == EXTI_GPIOI)) - -#endif /* STM32L496xx || STM32L4A6xx */ - -#if defined (STM32L4P5xx) || defined (STM32L4Q5xx) || defined (STM32L4R5xx) || defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined (STM32L4S9xx) - -#define IS_EXTI_GPIO_PORT(__PORT__) (((__PORT__) == EXTI_GPIOA) || \ - ((__PORT__) == EXTI_GPIOB) || \ - ((__PORT__) == EXTI_GPIOC) || \ - ((__PORT__) == EXTI_GPIOD) || \ - ((__PORT__) == EXTI_GPIOE) || \ - ((__PORT__) == EXTI_GPIOF) || \ - ((__PORT__) == EXTI_GPIOG) || \ - ((__PORT__) == EXTI_GPIOH) || \ - ((__PORT__) == EXTI_GPIOI)) - -#endif /* STM32L4P5xx || STM32L4Q5xx || STM32L4R5xx || STM32L4R7xx || STM32L4R9xx || STM32L4S5xx || STM32L4S7xx || STM32L4S9xx */ - -#define IS_EXTI_GPIO_PIN(__PIN__) ((__PIN__) < 16u) -/** - * @} - */ - - -/* Exported functions --------------------------------------------------------*/ -/** @defgroup EXTI_Exported_Functions EXTI Exported Functions - * @brief EXTI Exported Functions - * @{ - */ - -/** @defgroup EXTI_Exported_Functions_Group1 Configuration functions - * @brief Configuration functions - * @{ - */ -/* Configuration functions ****************************************************/ -HAL_StatusTypeDef HAL_EXTI_SetConfigLine(EXTI_HandleTypeDef *hexti, EXTI_ConfigTypeDef *pExtiConfig); -HAL_StatusTypeDef HAL_EXTI_GetConfigLine(EXTI_HandleTypeDef *hexti, EXTI_ConfigTypeDef *pExtiConfig); -HAL_StatusTypeDef HAL_EXTI_ClearConfigLine(EXTI_HandleTypeDef *hexti); -HAL_StatusTypeDef HAL_EXTI_RegisterCallback(EXTI_HandleTypeDef *hexti, EXTI_CallbackIDTypeDef CallbackID, void (*pPendingCbfn)(void)); -HAL_StatusTypeDef HAL_EXTI_GetHandle(EXTI_HandleTypeDef *hexti, uint32_t ExtiLine); -/** - * @} - */ - -/** @defgroup EXTI_Exported_Functions_Group2 IO operation functions - * @brief IO operation functions - * @{ - */ -/* IO operation functions *****************************************************/ -void HAL_EXTI_IRQHandler(EXTI_HandleTypeDef *hexti); -uint32_t HAL_EXTI_GetPending(EXTI_HandleTypeDef *hexti, uint32_t Edge); -void HAL_EXTI_ClearPending(EXTI_HandleTypeDef *hexti, uint32_t Edge); -void HAL_EXTI_GenerateSWI(EXTI_HandleTypeDef *hexti); - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /* STM32L4xx_HAL_EXTI_H */ - +/** + ****************************************************************************** + * @file stm32l4xx_hal_exti.h + * @author MCD Application Team + * @brief Header file of EXTI HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2018 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32L4xx_HAL_EXTI_H +#define STM32L4xx_HAL_EXTI_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l4xx_hal_def.h" + +/** @addtogroup STM32L4xx_HAL_Driver + * @{ + */ + +/** @defgroup EXTI EXTI + * @brief EXTI HAL module driver + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ + +/** @defgroup EXTI_Exported_Types EXTI Exported Types + * @{ + */ +typedef enum +{ + HAL_EXTI_COMMON_CB_ID = 0x00U, + HAL_EXTI_RISING_CB_ID = 0x01U, + HAL_EXTI_FALLING_CB_ID = 0x02U, +} EXTI_CallbackIDTypeDef; + + +/** + * @brief EXTI Handle structure definition + */ +typedef struct +{ + uint32_t Line; /*!< Exti line number */ + void (* PendingCallback)(void); /*!< Exti pending callback */ +} EXTI_HandleTypeDef; + +/** + * @brief EXTI Configuration structure definition + */ +typedef struct +{ + uint32_t Line; /*!< The Exti line to be configured. This parameter + can be a value of @ref EXTI_Line */ + uint32_t Mode; /*!< The Exit Mode to be configured for a core. + This parameter can be a combination of @ref EXTI_Mode */ + uint32_t Trigger; /*!< The Exti Trigger to be configured. This parameter + can be a value of @ref EXTI_Trigger */ + uint32_t GPIOSel; /*!< The Exti GPIO multiplexer selection to be configured. + This parameter is only possible for line 0 to 15. It + can be a value of @ref EXTI_GPIOSel */ +} EXTI_ConfigTypeDef; + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup EXTI_Exported_Constants EXTI Exported Constants + * @{ + */ + +/** @defgroup EXTI_Line EXTI Line + * @{ + */ +#if defined(STM32L412xx) || defined(STM32L422xx) + +#define EXTI_LINE_0 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x00u) +#define EXTI_LINE_1 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x01u) +#define EXTI_LINE_2 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x02u) +#define EXTI_LINE_3 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x03u) +#define EXTI_LINE_4 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x04u) +#define EXTI_LINE_5 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x05u) +#define EXTI_LINE_6 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x06u) +#define EXTI_LINE_7 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x07u) +#define EXTI_LINE_8 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x08u) +#define EXTI_LINE_9 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x09u) +#define EXTI_LINE_10 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Au) +#define EXTI_LINE_11 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Bu) +#define EXTI_LINE_12 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Cu) +#define EXTI_LINE_13 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Du) +#define EXTI_LINE_14 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Eu) +#define EXTI_LINE_15 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Fu) +#define EXTI_LINE_16 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x10u) +#define EXTI_LINE_17 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x11u) +#define EXTI_LINE_18 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x12u) +#define EXTI_LINE_19 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x13u) +#define EXTI_LINE_20 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x14u) +#define EXTI_LINE_21 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x15u) +#define EXTI_LINE_22 (EXTI_RESERVED | EXTI_REG1 | 0x16u) +#define EXTI_LINE_23 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x17u) +#define EXTI_LINE_24 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x18u) +#define EXTI_LINE_25 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x19u) +#define EXTI_LINE_26 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x1Au) +#define EXTI_LINE_27 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x1Bu) +#define EXTI_LINE_28 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x1Cu) +#define EXTI_LINE_29 (EXTI_RESERVED | EXTI_REG1 | 0x1Du) +#define EXTI_LINE_30 (EXTI_RESERVED | EXTI_REG1 | 0x1Eu) +#define EXTI_LINE_31 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x1Fu) +#define EXTI_LINE_32 (EXTI_DIRECT | EXTI_REG2 | EXTI_EVENT | 0x00u) +#define EXTI_LINE_33 (EXTI_DIRECT | EXTI_REG2 | EXTI_EVENT | 0x01u) +#define EXTI_LINE_34 (EXTI_RESERVED | EXTI_REG2 | 0x02u) +#define EXTI_LINE_35 (EXTI_CONFIG | EXTI_REG2 | EXTI_EVENT | 0x03u) +#define EXTI_LINE_36 (EXTI_RESERVED | EXTI_REG2 | 0x04u) +#define EXTI_LINE_37 (EXTI_CONFIG | EXTI_REG2 | EXTI_EVENT | 0x05u) +#define EXTI_LINE_38 (EXTI_CONFIG | EXTI_REG2 | EXTI_EVENT | 0x06u) +#define EXTI_LINE_39 (EXTI_RESERVED | EXTI_REG2 | 0x07u) +#define EXTI_LINE_40 (EXTI_RESERVED | EXTI_REG2 | 0x08u) + +#endif /* STM32L412xx || STM32L422xx */ + +#if defined(STM32L431xx) + +#define EXTI_LINE_0 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x00u) +#define EXTI_LINE_1 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x01u) +#define EXTI_LINE_2 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x02u) +#define EXTI_LINE_3 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x03u) +#define EXTI_LINE_4 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x04u) +#define EXTI_LINE_5 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x05u) +#define EXTI_LINE_6 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x06u) +#define EXTI_LINE_7 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x07u) +#define EXTI_LINE_8 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x08u) +#define EXTI_LINE_9 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x09u) +#define EXTI_LINE_10 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Au) +#define EXTI_LINE_11 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Bu) +#define EXTI_LINE_12 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Cu) +#define EXTI_LINE_13 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Du) +#define EXTI_LINE_14 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Eu) +#define EXTI_LINE_15 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Fu) +#define EXTI_LINE_16 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x10u) +#define EXTI_LINE_17 (EXTI_RESERVED | EXTI_REG1 | 0x11u) +#define EXTI_LINE_18 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x12u) +#define EXTI_LINE_19 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x13u) +#define EXTI_LINE_20 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x14u) +#define EXTI_LINE_21 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x15u) +#define EXTI_LINE_22 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x16u) +#define EXTI_LINE_23 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x17u) +#define EXTI_LINE_24 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x18u) +#define EXTI_LINE_25 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x19u) +#define EXTI_LINE_26 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x1Au) +#define EXTI_LINE_27 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x1Bu) +#define EXTI_LINE_28 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x1Cu) +#define EXTI_LINE_29 (EXTI_RESERVED | EXTI_REG1 | 0x1Du) +#define EXTI_LINE_30 (EXTI_RESERVED | EXTI_REG1 | 0x1Eu) +#define EXTI_LINE_31 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x1Fu) +#define EXTI_LINE_32 (EXTI_DIRECT | EXTI_REG2 | EXTI_EVENT | 0x00u) +#define EXTI_LINE_33 (EXTI_DIRECT | EXTI_REG2 | EXTI_EVENT | 0x01u) +#define EXTI_LINE_34 (EXTI_DIRECT | EXTI_REG2 | EXTI_EVENT | 0x02u) +#define EXTI_LINE_35 (EXTI_RESERVED | EXTI_REG2 | 0x03u) +#define EXTI_LINE_36 (EXTI_RESERVED | EXTI_REG2 | 0x04u) +#define EXTI_LINE_37 (EXTI_CONFIG | EXTI_REG2 | EXTI_EVENT | 0x05u) +#define EXTI_LINE_38 (EXTI_CONFIG | EXTI_REG2 | EXTI_EVENT | 0x06u) +#define EXTI_LINE_39 (EXTI_RESERVED | EXTI_REG2 | 0x07u) +#define EXTI_LINE_40 (EXTI_RESERVED | EXTI_REG2 | 0x08u) + +#endif /* STM32L431xx */ + +#if defined(STM32L432xx) || defined(STM32L442xx) + +#define EXTI_LINE_0 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x00u) +#define EXTI_LINE_1 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x01u) +#define EXTI_LINE_2 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x02u) +#define EXTI_LINE_3 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x03u) +#define EXTI_LINE_4 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x04u) +#define EXTI_LINE_5 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x05u) +#define EXTI_LINE_6 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x06u) +#define EXTI_LINE_7 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x07u) +#define EXTI_LINE_8 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x08u) +#define EXTI_LINE_9 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x09u) +#define EXTI_LINE_10 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Au) +#define EXTI_LINE_11 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Bu) +#define EXTI_LINE_12 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Cu) +#define EXTI_LINE_13 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Du) +#define EXTI_LINE_14 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Eu) +#define EXTI_LINE_15 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Fu) +#define EXTI_LINE_16 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x10u) +#define EXTI_LINE_17 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x11u) +#define EXTI_LINE_18 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x12u) +#define EXTI_LINE_19 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x13u) +#define EXTI_LINE_20 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x14u) +#define EXTI_LINE_21 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x15u) +#define EXTI_LINE_22 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x16u) +#define EXTI_LINE_23 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x17u) +#define EXTI_LINE_24 (EXTI_RESERVED | EXTI_REG1 | 0x18u) +#define EXTI_LINE_25 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x19u) +#define EXTI_LINE_26 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x1Au) +#define EXTI_LINE_27 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x1Bu) +#define EXTI_LINE_28 (EXTI_RESERVED | EXTI_REG1 | 0x1Cu) +#define EXTI_LINE_29 (EXTI_RESERVED | EXTI_REG1 | 0x1Du) +#define EXTI_LINE_30 (EXTI_RESERVED | EXTI_REG1 | 0x1Eu) +#define EXTI_LINE_31 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x1Fu) +#define EXTI_LINE_32 (EXTI_DIRECT | EXTI_REG2 | EXTI_EVENT | 0x00u) +#define EXTI_LINE_33 (EXTI_DIRECT | EXTI_REG2 | EXTI_EVENT | 0x01u) +#define EXTI_LINE_34 (EXTI_DIRECT | EXTI_REG2 | EXTI_EVENT | 0x02u) +#define EXTI_LINE_35 (EXTI_CONFIG | EXTI_REG2 | EXTI_EVENT | 0x03u) +#define EXTI_LINE_36 (EXTI_RESERVED | EXTI_REG2 | 0x04u) +#define EXTI_LINE_37 (EXTI_CONFIG | EXTI_REG2 | EXTI_EVENT | 0x05u) +#define EXTI_LINE_38 (EXTI_CONFIG | EXTI_REG2 | EXTI_EVENT | 0x06u) +#define EXTI_LINE_39 (EXTI_DIRECT | EXTI_REG2 | EXTI_EVENT | 0x07u) +#define EXTI_LINE_40 (EXTI_RESERVED | EXTI_REG2 | 0x08u) + +#endif /* STM32L432xx || STM32L442xx */ + +#if defined(STM32L433xx) || defined(STM32L443xx) + +#define EXTI_LINE_0 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x00u) +#define EXTI_LINE_1 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x01u) +#define EXTI_LINE_2 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x02u) +#define EXTI_LINE_3 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x03u) +#define EXTI_LINE_4 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x04u) +#define EXTI_LINE_5 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x05u) +#define EXTI_LINE_6 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x06u) +#define EXTI_LINE_7 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x07u) +#define EXTI_LINE_8 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x08u) +#define EXTI_LINE_9 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x09u) +#define EXTI_LINE_10 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Au) +#define EXTI_LINE_11 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Bu) +#define EXTI_LINE_12 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Cu) +#define EXTI_LINE_13 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Du) +#define EXTI_LINE_14 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Eu) +#define EXTI_LINE_15 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Fu) +#define EXTI_LINE_16 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x10u) +#define EXTI_LINE_17 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x11u) +#define EXTI_LINE_18 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x12u) +#define EXTI_LINE_19 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x13u) +#define EXTI_LINE_20 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x14u) +#define EXTI_LINE_21 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x15u) +#define EXTI_LINE_22 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x16u) +#define EXTI_LINE_23 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x17u) +#define EXTI_LINE_24 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x18u) +#define EXTI_LINE_25 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x19u) +#define EXTI_LINE_26 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x1Au) +#define EXTI_LINE_27 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x1Bu) +#define EXTI_LINE_28 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x1Cu) +#define EXTI_LINE_29 (EXTI_RESERVED | EXTI_REG1 | 0x1Du) +#define EXTI_LINE_30 (EXTI_RESERVED | EXTI_REG1 | 0x1Eu) +#define EXTI_LINE_31 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x1Fu) +#define EXTI_LINE_32 (EXTI_DIRECT | EXTI_REG2 | EXTI_EVENT | 0x00u) +#define EXTI_LINE_33 (EXTI_DIRECT | EXTI_REG2 | EXTI_EVENT | 0x01u) +#define EXTI_LINE_34 (EXTI_DIRECT | EXTI_REG2 | EXTI_EVENT | 0x02u) +#define EXTI_LINE_35 (EXTI_CONFIG | EXTI_REG2 | EXTI_EVENT | 0x03u) +#define EXTI_LINE_36 (EXTI_RESERVED | EXTI_REG2 | 0x04u) +#define EXTI_LINE_37 (EXTI_CONFIG | EXTI_REG2 | EXTI_EVENT | 0x05u) +#define EXTI_LINE_38 (EXTI_CONFIG | EXTI_REG2 | EXTI_EVENT | 0x06u) +#define EXTI_LINE_39 (EXTI_DIRECT | EXTI_REG2 | EXTI_EVENT | 0x07u) +#define EXTI_LINE_40 (EXTI_RESERVED | EXTI_REG2 | 0x08u) + +#endif /* STM32L433xx || STM32L443xx */ + +#if defined(STM32L451xx) + +#define EXTI_LINE_0 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x00u) +#define EXTI_LINE_1 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x01u) +#define EXTI_LINE_2 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x02u) +#define EXTI_LINE_3 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x03u) +#define EXTI_LINE_4 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x04u) +#define EXTI_LINE_5 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x05u) +#define EXTI_LINE_6 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x06u) +#define EXTI_LINE_7 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x07u) +#define EXTI_LINE_8 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x08u) +#define EXTI_LINE_9 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x09u) +#define EXTI_LINE_10 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Au) +#define EXTI_LINE_11 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Bu) +#define EXTI_LINE_12 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Cu) +#define EXTI_LINE_13 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Du) +#define EXTI_LINE_14 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Eu) +#define EXTI_LINE_15 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Fu) +#define EXTI_LINE_16 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x10u) +#define EXTI_LINE_17 (EXTI_RESERVED | EXTI_REG1 | 0x11u) +#define EXTI_LINE_18 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x12u) +#define EXTI_LINE_19 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x13u) +#define EXTI_LINE_20 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x14u) +#define EXTI_LINE_21 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x15u) +#define EXTI_LINE_22 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x16u) +#define EXTI_LINE_23 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x17u) +#define EXTI_LINE_24 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x18u) +#define EXTI_LINE_25 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x19u) +#define EXTI_LINE_26 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x1Au) +#define EXTI_LINE_27 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x1Bu) +#define EXTI_LINE_28 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x1Cu) +#define EXTI_LINE_29 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x1Du) +#define EXTI_LINE_30 (EXTI_RESERVED | EXTI_REG1 | 0x1Eu) +#define EXTI_LINE_31 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x1Fu) +#define EXTI_LINE_32 (EXTI_DIRECT | EXTI_REG2 | EXTI_EVENT | 0x00u) +#define EXTI_LINE_33 (EXTI_DIRECT | EXTI_REG2 | EXTI_EVENT | 0x01u) +#define EXTI_LINE_34 (EXTI_RESERVED | EXTI_REG2 | 0x02u) +#define EXTI_LINE_35 (EXTI_RESERVED | EXTI_REG2 | 0x03u) +#define EXTI_LINE_36 (EXTI_RESERVED | EXTI_REG2 | 0x04u) +#define EXTI_LINE_37 (EXTI_CONFIG | EXTI_REG2 | EXTI_EVENT | 0x05u) +#define EXTI_LINE_38 (EXTI_CONFIG | EXTI_REG2 | EXTI_EVENT | 0x06u) +#define EXTI_LINE_39 (EXTI_RESERVED | EXTI_REG2 | 0x07u) +#define EXTI_LINE_40 (EXTI_DIRECT | EXTI_REG2 | EXTI_EVENT | 0x08u) + +#endif /* STM32L451xx */ + +#if defined(STM32L452xx) || defined(STM32L462xx) + +#define EXTI_LINE_0 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x00u) +#define EXTI_LINE_1 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x01u) +#define EXTI_LINE_2 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x02u) +#define EXTI_LINE_3 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x03u) +#define EXTI_LINE_4 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x04u) +#define EXTI_LINE_5 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x05u) +#define EXTI_LINE_6 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x06u) +#define EXTI_LINE_7 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x07u) +#define EXTI_LINE_8 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x08u) +#define EXTI_LINE_9 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x09u) +#define EXTI_LINE_10 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Au) +#define EXTI_LINE_11 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Bu) +#define EXTI_LINE_12 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Cu) +#define EXTI_LINE_13 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Du) +#define EXTI_LINE_14 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Eu) +#define EXTI_LINE_15 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Fu) +#define EXTI_LINE_16 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x10u) +#define EXTI_LINE_17 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x11u) +#define EXTI_LINE_18 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x12u) +#define EXTI_LINE_19 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x13u) +#define EXTI_LINE_20 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x14u) +#define EXTI_LINE_21 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x15u) +#define EXTI_LINE_22 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x16u) +#define EXTI_LINE_23 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x17u) +#define EXTI_LINE_24 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x18u) +#define EXTI_LINE_25 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x19u) +#define EXTI_LINE_26 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x1Au) +#define EXTI_LINE_27 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x1Bu) +#define EXTI_LINE_28 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x1Cu) +#define EXTI_LINE_29 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x1Du) +#define EXTI_LINE_30 (EXTI_RESERVED | EXTI_REG1 | 0x1Eu) +#define EXTI_LINE_31 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x1Fu) +#define EXTI_LINE_32 (EXTI_DIRECT | EXTI_REG2 | EXTI_EVENT | 0x00u) +#define EXTI_LINE_33 (EXTI_DIRECT | EXTI_REG2 | EXTI_EVENT | 0x01u) +#define EXTI_LINE_34 (EXTI_RESERVED | EXTI_REG2 | 0x02u) +#define EXTI_LINE_35 (EXTI_CONFIG | EXTI_REG2 | EXTI_EVENT | 0x03u) +#define EXTI_LINE_36 (EXTI_RESERVED | EXTI_REG2 | 0x04u) +#define EXTI_LINE_37 (EXTI_CONFIG | EXTI_REG2 | EXTI_EVENT | 0x05u) +#define EXTI_LINE_38 (EXTI_CONFIG | EXTI_REG2 | EXTI_EVENT | 0x06u) +#define EXTI_LINE_39 (EXTI_RESERVED | EXTI_REG2 | 0x07u) +#define EXTI_LINE_40 (EXTI_DIRECT | EXTI_REG2 | EXTI_EVENT | 0x08u) + +#endif /* STM32L452xx || STM32L462xx */ + +#if defined(STM32L471xx) + +#define EXTI_LINE_0 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x00u) +#define EXTI_LINE_1 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x01u) +#define EXTI_LINE_2 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x02u) +#define EXTI_LINE_3 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x03u) +#define EXTI_LINE_4 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x04u) +#define EXTI_LINE_5 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x05u) +#define EXTI_LINE_6 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x06u) +#define EXTI_LINE_7 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x07u) +#define EXTI_LINE_8 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x08u) +#define EXTI_LINE_9 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x09u) +#define EXTI_LINE_10 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Au) +#define EXTI_LINE_11 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Bu) +#define EXTI_LINE_12 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Cu) +#define EXTI_LINE_13 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Du) +#define EXTI_LINE_14 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Eu) +#define EXTI_LINE_15 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Fu) +#define EXTI_LINE_16 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x10u) +#define EXTI_LINE_17 (EXTI_RESERVED | EXTI_REG1 | 0x11u) +#define EXTI_LINE_18 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x12u) +#define EXTI_LINE_19 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x13u) +#define EXTI_LINE_20 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x14u) +#define EXTI_LINE_21 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x15u) +#define EXTI_LINE_22 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x16u) +#define EXTI_LINE_23 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x17u) +#define EXTI_LINE_24 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x18u) +#define EXTI_LINE_25 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x19u) +#define EXTI_LINE_26 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x1Au) +#define EXTI_LINE_27 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x1Bu) +#define EXTI_LINE_28 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x1Cu) +#define EXTI_LINE_29 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x1Du) +#define EXTI_LINE_30 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x1Eu) +#define EXTI_LINE_31 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x1Fu) +#define EXTI_LINE_32 (EXTI_DIRECT | EXTI_REG2 | EXTI_EVENT | 0x00u) +#define EXTI_LINE_33 (EXTI_DIRECT | EXTI_REG2 | EXTI_EVENT | 0x01u) +#define EXTI_LINE_34 (EXTI_CONFIG | EXTI_REG2 | EXTI_EVENT | 0x02u) +#define EXTI_LINE_35 (EXTI_RESERVED | EXTI_REG2 | 0x03u) +#define EXTI_LINE_36 (EXTI_CONFIG | EXTI_REG2 | EXTI_EVENT | 0x04u) +#define EXTI_LINE_37 (EXTI_CONFIG | EXTI_REG2 | EXTI_EVENT | 0x05u) +#define EXTI_LINE_38 (EXTI_CONFIG | EXTI_REG2 | EXTI_EVENT | 0x06u) +#define EXTI_LINE_39 (EXTI_RESERVED | EXTI_REG2 | 0x07u) +#define EXTI_LINE_40 (EXTI_RESERVED | EXTI_REG2 | 0x08u) + +#endif /* STM32L471xx */ + +#if defined(STM32L475xx) || defined(STM32L485xx) + +#define EXTI_LINE_0 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x00u) +#define EXTI_LINE_1 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x01u) +#define EXTI_LINE_2 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x02u) +#define EXTI_LINE_3 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x03u) +#define EXTI_LINE_4 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x04u) +#define EXTI_LINE_5 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x05u) +#define EXTI_LINE_6 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x06u) +#define EXTI_LINE_7 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x07u) +#define EXTI_LINE_8 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x08u) +#define EXTI_LINE_9 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x09u) +#define EXTI_LINE_10 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Au) +#define EXTI_LINE_11 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Bu) +#define EXTI_LINE_12 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Cu) +#define EXTI_LINE_13 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Du) +#define EXTI_LINE_14 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Eu) +#define EXTI_LINE_15 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Fu) +#define EXTI_LINE_16 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x10u) +#define EXTI_LINE_17 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x11u) +#define EXTI_LINE_18 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x12u) +#define EXTI_LINE_19 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x13u) +#define EXTI_LINE_20 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x14u) +#define EXTI_LINE_21 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x15u) +#define EXTI_LINE_22 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x16u) +#define EXTI_LINE_23 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x17u) +#define EXTI_LINE_24 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x18u) +#define EXTI_LINE_25 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x19u) +#define EXTI_LINE_26 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x1Au) +#define EXTI_LINE_27 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x1Bu) +#define EXTI_LINE_28 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x1Cu) +#define EXTI_LINE_29 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x1Du) +#define EXTI_LINE_30 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x1Eu) +#define EXTI_LINE_31 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x1Fu) +#define EXTI_LINE_32 (EXTI_DIRECT | EXTI_REG2 | EXTI_EVENT | 0x00u) +#define EXTI_LINE_33 (EXTI_DIRECT | EXTI_REG2 | EXTI_EVENT | 0x01u) +#define EXTI_LINE_34 (EXTI_CONFIG | EXTI_REG2 | EXTI_EVENT | 0x02u) +#define EXTI_LINE_35 (EXTI_CONFIG | EXTI_REG2 | EXTI_EVENT | 0x03u) +#define EXTI_LINE_36 (EXTI_CONFIG | EXTI_REG2 | EXTI_EVENT | 0x04u) +#define EXTI_LINE_37 (EXTI_CONFIG | EXTI_REG2 | EXTI_EVENT | 0x05u) +#define EXTI_LINE_38 (EXTI_CONFIG | EXTI_REG2 | EXTI_EVENT | 0x06u) +#define EXTI_LINE_39 (EXTI_RESERVED | EXTI_REG2 | 0x07u) +#define EXTI_LINE_40 (EXTI_RESERVED | EXTI_REG2 | 0x08u) + +#endif /* STM32L475xx || STM32L485xx */ + +#if defined(STM32L476xx) || defined(STM32L486xx) + +#define EXTI_LINE_0 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x00u) +#define EXTI_LINE_1 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x01u) +#define EXTI_LINE_2 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x02u) +#define EXTI_LINE_3 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x03u) +#define EXTI_LINE_4 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x04u) +#define EXTI_LINE_5 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x05u) +#define EXTI_LINE_6 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x06u) +#define EXTI_LINE_7 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x07u) +#define EXTI_LINE_8 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x08u) +#define EXTI_LINE_9 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x09u) +#define EXTI_LINE_10 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Au) +#define EXTI_LINE_11 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Bu) +#define EXTI_LINE_12 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Cu) +#define EXTI_LINE_13 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Du) +#define EXTI_LINE_14 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Eu) +#define EXTI_LINE_15 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Fu) +#define EXTI_LINE_16 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x10u) +#define EXTI_LINE_17 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x11u) +#define EXTI_LINE_18 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x12u) +#define EXTI_LINE_19 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x13u) +#define EXTI_LINE_20 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x14u) +#define EXTI_LINE_21 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x15u) +#define EXTI_LINE_22 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x16u) +#define EXTI_LINE_23 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x17u) +#define EXTI_LINE_24 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x18u) +#define EXTI_LINE_25 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x19u) +#define EXTI_LINE_26 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x1Au) +#define EXTI_LINE_27 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x1Bu) +#define EXTI_LINE_28 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x1Cu) +#define EXTI_LINE_29 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x1Du) +#define EXTI_LINE_30 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x1Eu) +#define EXTI_LINE_31 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x1Fu) +#define EXTI_LINE_32 (EXTI_DIRECT | EXTI_REG2 | EXTI_EVENT | 0x00u) +#define EXTI_LINE_33 (EXTI_DIRECT | EXTI_REG2 | EXTI_EVENT | 0x01u) +#define EXTI_LINE_34 (EXTI_CONFIG | EXTI_REG2 | EXTI_EVENT | 0x02u) +#define EXTI_LINE_35 (EXTI_CONFIG | EXTI_REG2 | EXTI_EVENT | 0x03u) +#define EXTI_LINE_36 (EXTI_CONFIG | EXTI_REG2 | EXTI_EVENT | 0x04u) +#define EXTI_LINE_37 (EXTI_CONFIG | EXTI_REG2 | EXTI_EVENT | 0x05u) +#define EXTI_LINE_38 (EXTI_CONFIG | EXTI_REG2 | EXTI_EVENT | 0x06u) +#define EXTI_LINE_39 (EXTI_DIRECT | EXTI_REG2 | EXTI_EVENT | 0x07u) +#define EXTI_LINE_40 (EXTI_RESERVED | EXTI_REG2 | 0x08u) + +#endif /* STM32L476xx || STM32L486xx */ + +#if defined(STM32L496xx) || defined(STM32L4A6xx) + +#define EXTI_LINE_0 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x00u) +#define EXTI_LINE_1 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x01u) +#define EXTI_LINE_2 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x02u) +#define EXTI_LINE_3 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x03u) +#define EXTI_LINE_4 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x04u) +#define EXTI_LINE_5 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x05u) +#define EXTI_LINE_6 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x06u) +#define EXTI_LINE_7 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x07u) +#define EXTI_LINE_8 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x08u) +#define EXTI_LINE_9 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x09u) +#define EXTI_LINE_10 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Au) +#define EXTI_LINE_11 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Bu) +#define EXTI_LINE_12 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Cu) +#define EXTI_LINE_13 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Du) +#define EXTI_LINE_14 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Eu) +#define EXTI_LINE_15 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Fu) +#define EXTI_LINE_16 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x10u) +#define EXTI_LINE_17 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x11u) +#define EXTI_LINE_18 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x12u) +#define EXTI_LINE_19 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x13u) +#define EXTI_LINE_20 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x14u) +#define EXTI_LINE_21 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x15u) +#define EXTI_LINE_22 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x16u) +#define EXTI_LINE_23 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x17u) +#define EXTI_LINE_24 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x18u) +#define EXTI_LINE_25 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x19u) +#define EXTI_LINE_26 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x1Au) +#define EXTI_LINE_27 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x1Bu) +#define EXTI_LINE_28 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x1Cu) +#define EXTI_LINE_29 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x1Du) +#define EXTI_LINE_30 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x1Eu) +#define EXTI_LINE_31 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x1Fu) +#define EXTI_LINE_32 (EXTI_DIRECT | EXTI_REG2 | EXTI_EVENT | 0x00u) +#define EXTI_LINE_33 (EXTI_DIRECT | EXTI_REG2 | EXTI_EVENT | 0x01u) +#define EXTI_LINE_34 (EXTI_DIRECT | EXTI_REG2 | EXTI_EVENT | 0x02u) +#define EXTI_LINE_35 (EXTI_CONFIG | EXTI_REG2 | EXTI_EVENT | 0x03u) +#define EXTI_LINE_36 (EXTI_CONFIG | EXTI_REG2 | EXTI_EVENT | 0x04u) +#define EXTI_LINE_37 (EXTI_CONFIG | EXTI_REG2 | EXTI_EVENT | 0x05u) +#define EXTI_LINE_38 (EXTI_CONFIG | EXTI_REG2 | EXTI_EVENT | 0x06u) +#define EXTI_LINE_39 (EXTI_DIRECT | EXTI_REG2 | EXTI_EVENT | 0x07u) +#define EXTI_LINE_40 (EXTI_DIRECT | EXTI_REG2 | EXTI_EVENT | 0x08u) + +#endif /* STM32L496xx || STM32L4A6xx */ + +#if defined (STM32L4P5xx) || defined (STM32L4Q5xx) || defined (STM32L4R5xx) || defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined (STM32L4S9xx) + +#define EXTI_LINE_0 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x00u) +#define EXTI_LINE_1 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x01u) +#define EXTI_LINE_2 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x02u) +#define EXTI_LINE_3 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x03u) +#define EXTI_LINE_4 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x04u) +#define EXTI_LINE_5 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x05u) +#define EXTI_LINE_6 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x06u) +#define EXTI_LINE_7 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x07u) +#define EXTI_LINE_8 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x08u) +#define EXTI_LINE_9 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x09u) +#define EXTI_LINE_10 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Au) +#define EXTI_LINE_11 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Bu) +#define EXTI_LINE_12 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Cu) +#define EXTI_LINE_13 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Du) +#define EXTI_LINE_14 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Eu) +#define EXTI_LINE_15 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Fu) +#define EXTI_LINE_16 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x10u) +#define EXTI_LINE_17 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x11u) +#define EXTI_LINE_18 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x12u) +#define EXTI_LINE_19 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x13u) +#define EXTI_LINE_20 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x14u) +#define EXTI_LINE_21 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x15u) +#define EXTI_LINE_22 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x16u) +#define EXTI_LINE_23 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x17u) +#define EXTI_LINE_24 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x18u) +#define EXTI_LINE_25 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x19u) +#define EXTI_LINE_26 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x1Au) +#define EXTI_LINE_27 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x1Bu) +#define EXTI_LINE_28 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x1Cu) +#define EXTI_LINE_29 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x1Du) +#define EXTI_LINE_30 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x1Eu) +#define EXTI_LINE_31 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x1Fu) +#define EXTI_LINE_32 (EXTI_DIRECT | EXTI_REG2 | EXTI_EVENT | 0x00u) +#define EXTI_LINE_33 (EXTI_DIRECT | EXTI_REG2 | EXTI_EVENT | 0x01u) +#define EXTI_LINE_34 (EXTI_RESERVED | EXTI_REG2 | 0x02u) +#define EXTI_LINE_35 (EXTI_CONFIG | EXTI_REG2 | EXTI_EVENT | 0x03u) +#define EXTI_LINE_36 (EXTI_CONFIG | EXTI_REG2 | EXTI_EVENT | 0x04u) +#define EXTI_LINE_37 (EXTI_CONFIG | EXTI_REG2 | EXTI_EVENT | 0x05u) +#define EXTI_LINE_38 (EXTI_CONFIG | EXTI_REG2 | EXTI_EVENT | 0x06u) +#define EXTI_LINE_39 (EXTI_RESERVED | EXTI_REG2 | 0x07u) +#define EXTI_LINE_40 (EXTI_DIRECT | EXTI_REG2 | EXTI_EVENT | 0x08u) + +#endif /* STM32L4P5xx || STM32L4Q5xx || STM32L4R5xx || STM32L4R7xx || STM32L4R9xx || STM32L4S5xx || STM32L4S7xx || STM32L4S9xx */ + +/** + * @} + */ + +/** @defgroup EXTI_Mode EXTI Mode + * @{ + */ +#define EXTI_MODE_NONE 0x00000000u +#define EXTI_MODE_INTERRUPT 0x00000001u +#define EXTI_MODE_EVENT 0x00000002u +/** + * @} + */ + +/** @defgroup EXTI_Trigger EXTI Trigger + * @{ + */ +#define EXTI_TRIGGER_NONE 0x00000000u +#define EXTI_TRIGGER_RISING 0x00000001u +#define EXTI_TRIGGER_FALLING 0x00000002u +#define EXTI_TRIGGER_RISING_FALLING (EXTI_TRIGGER_RISING | EXTI_TRIGGER_FALLING) +/** + * @} + */ + +/** @defgroup EXTI_GPIOSel EXTI GPIOSel + * @brief + * @{ + */ +#define EXTI_GPIOA 0x00000000u +#define EXTI_GPIOB 0x00000001u +#define EXTI_GPIOC 0x00000002u +#define EXTI_GPIOD 0x00000003u +#define EXTI_GPIOE 0x00000004u +#define EXTI_GPIOF 0x00000005u +#define EXTI_GPIOG 0x00000006u +#define EXTI_GPIOH 0x00000007u +#define EXTI_GPIOI 0x00000008u +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup EXTI_Exported_Macros EXTI Exported Macros + * @{ + */ + +/** + * @} + */ + +/* Private constants --------------------------------------------------------*/ +/** @defgroup EXTI_Private_Constants EXTI Private Constants + * @{ + */ +/** + * @brief EXTI Line property definition + */ +#define EXTI_PROPERTY_SHIFT 24u +#define EXTI_DIRECT (0x01uL << EXTI_PROPERTY_SHIFT) +#define EXTI_CONFIG (0x02uL << EXTI_PROPERTY_SHIFT) +#define EXTI_GPIO ((0x04uL << EXTI_PROPERTY_SHIFT) | EXTI_CONFIG) +#define EXTI_RESERVED (0x08uL << EXTI_PROPERTY_SHIFT) +#define EXTI_PROPERTY_MASK (EXTI_DIRECT | EXTI_CONFIG | EXTI_GPIO) + +/** + * @brief EXTI Event presence definition + */ +#define EXTI_EVENT_PRESENCE_SHIFT 28u +#define EXTI_EVENT (0x01uL << EXTI_EVENT_PRESENCE_SHIFT) +#define EXTI_EVENT_PRESENCE_MASK (EXTI_EVENT) + +/** + * @brief EXTI Register and bit usage + */ +#define EXTI_REG_SHIFT 16u +#define EXTI_REG1 (0x00uL << EXTI_REG_SHIFT) +#define EXTI_REG2 (0x01uL << EXTI_REG_SHIFT) +#define EXTI_REG_MASK (EXTI_REG1 | EXTI_REG2) +#define EXTI_PIN_MASK 0x0000001Fu + +/** + * @brief EXTI Mask for interrupt & event mode + */ +#define EXTI_MODE_MASK (EXTI_MODE_EVENT | EXTI_MODE_INTERRUPT) + +/** + * @brief EXTI Mask for trigger possibilities + */ +#define EXTI_TRIGGER_MASK (EXTI_TRIGGER_RISING | EXTI_TRIGGER_FALLING) + +/** + * @brief EXTI Line number + */ +#define EXTI_LINE_NB 41u + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup EXTI_Private_Macros EXTI Private Macros + * @{ + */ +#define IS_EXTI_LINE(__EXTI_LINE__) ((((__EXTI_LINE__) & ~(EXTI_PROPERTY_MASK | EXTI_EVENT_PRESENCE_MASK | EXTI_REG_MASK | EXTI_PIN_MASK)) == 0x00u) && \ + ((((__EXTI_LINE__) & EXTI_PROPERTY_MASK) == EXTI_DIRECT) || \ + (((__EXTI_LINE__) & EXTI_PROPERTY_MASK) == EXTI_CONFIG) || \ + (((__EXTI_LINE__) & EXTI_PROPERTY_MASK) == EXTI_GPIO)) && \ + (((__EXTI_LINE__) & (EXTI_REG_MASK | EXTI_PIN_MASK)) < \ + (((EXTI_LINE_NB / 32u) << EXTI_REG_SHIFT) | (EXTI_LINE_NB % 32u)))) + +#define IS_EXTI_MODE(__EXTI_LINE__) ((((__EXTI_LINE__) & EXTI_MODE_MASK) != 0x00u) && \ + (((__EXTI_LINE__) & ~EXTI_MODE_MASK) == 0x00u)) + +#define IS_EXTI_TRIGGER(__EXTI_LINE__) (((__EXTI_LINE__) & ~EXTI_TRIGGER_MASK) == 0x00u) + +#define IS_EXTI_PENDING_EDGE(__EXTI_LINE__) ((__EXTI_LINE__) == EXTI_TRIGGER_RISING_FALLING) + +#define IS_EXTI_CONFIG_LINE(__EXTI_LINE__) (((__EXTI_LINE__) & EXTI_CONFIG) != 0x00u) + +#if defined(STM32L412xx) || defined(STM32L422xx) + +#define IS_EXTI_GPIO_PORT(__PORT__) (((__PORT__) == EXTI_GPIOA) || \ + ((__PORT__) == EXTI_GPIOB) || \ + ((__PORT__) == EXTI_GPIOC) || \ + ((__PORT__) == EXTI_GPIOD) || \ + ((__PORT__) == EXTI_GPIOH)) + +#endif /* STM32L412xx || STM32L422xx */ + +#if defined(STM32L431xx) || defined(STM32L433xx) || defined(STM32L443xx) + +#define IS_EXTI_GPIO_PORT(__PORT__) (((__PORT__) == EXTI_GPIOA) || \ + ((__PORT__) == EXTI_GPIOB) || \ + ((__PORT__) == EXTI_GPIOC) || \ + ((__PORT__) == EXTI_GPIOD) || \ + ((__PORT__) == EXTI_GPIOE) || \ + ((__PORT__) == EXTI_GPIOH)) + +#endif /* STM32L431xx || STM32L433xx || STM32L443xx */ + +#if defined(STM32L432xx) || defined(STM32L442xx) + +#define IS_EXTI_GPIO_PORT(__PORT__) (((__PORT__) == EXTI_GPIOA) || \ + ((__PORT__) == EXTI_GPIOB) || \ + ((__PORT__) == EXTI_GPIOC) || \ + ((__PORT__) == EXTI_GPIOH)) + +#endif /* STM32L432xx || STM32L442xx */ + +#if defined(STM32L451xx) || defined(STM32L452xx) || defined(STM32L462xx) + +#define IS_EXTI_GPIO_PORT(__PORT__) (((__PORT__) == EXTI_GPIOA) || \ + ((__PORT__) == EXTI_GPIOB) || \ + ((__PORT__) == EXTI_GPIOC) || \ + ((__PORT__) == EXTI_GPIOD) || \ + ((__PORT__) == EXTI_GPIOE) || \ + ((__PORT__) == EXTI_GPIOH)) + +#endif /* STM32L451xx || STM32L452xx || STM32L462xx */ + +#if defined(STM32L471xx) || defined(STM32L475xx) || defined(STM32L476xx) || defined(STM32L485xx) || defined(STM32L486xx) + +#define IS_EXTI_GPIO_PORT(__PORT__) (((__PORT__) == EXTI_GPIOA) || \ + ((__PORT__) == EXTI_GPIOB) || \ + ((__PORT__) == EXTI_GPIOC) || \ + ((__PORT__) == EXTI_GPIOD) || \ + ((__PORT__) == EXTI_GPIOE) || \ + ((__PORT__) == EXTI_GPIOF) || \ + ((__PORT__) == EXTI_GPIOG) || \ + ((__PORT__) == EXTI_GPIOH)) + +#endif /* STM32L471xx || STM32L475xx || STM32L476xx || STM32L485xx || STM32L486xx */ + +#if defined(STM32L496xx) || defined(STM32L4A6xx) + +#define IS_EXTI_GPIO_PORT(__PORT__) (((__PORT__) == EXTI_GPIOA) || \ + ((__PORT__) == EXTI_GPIOB) || \ + ((__PORT__) == EXTI_GPIOC) || \ + ((__PORT__) == EXTI_GPIOD) || \ + ((__PORT__) == EXTI_GPIOE) || \ + ((__PORT__) == EXTI_GPIOF) || \ + ((__PORT__) == EXTI_GPIOG) || \ + ((__PORT__) == EXTI_GPIOH) || \ + ((__PORT__) == EXTI_GPIOI)) + +#endif /* STM32L496xx || STM32L4A6xx */ + +#if defined (STM32L4P5xx) || defined (STM32L4Q5xx) || defined (STM32L4R5xx) || defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined (STM32L4S9xx) + +#define IS_EXTI_GPIO_PORT(__PORT__) (((__PORT__) == EXTI_GPIOA) || \ + ((__PORT__) == EXTI_GPIOB) || \ + ((__PORT__) == EXTI_GPIOC) || \ + ((__PORT__) == EXTI_GPIOD) || \ + ((__PORT__) == EXTI_GPIOE) || \ + ((__PORT__) == EXTI_GPIOF) || \ + ((__PORT__) == EXTI_GPIOG) || \ + ((__PORT__) == EXTI_GPIOH) || \ + ((__PORT__) == EXTI_GPIOI)) + +#endif /* STM32L4P5xx || STM32L4Q5xx || STM32L4R5xx || STM32L4R7xx || STM32L4R9xx || STM32L4S5xx || STM32L4S7xx || STM32L4S9xx */ + +#define IS_EXTI_GPIO_PIN(__PIN__) ((__PIN__) < 16u) +/** + * @} + */ + + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup EXTI_Exported_Functions EXTI Exported Functions + * @brief EXTI Exported Functions + * @{ + */ + +/** @defgroup EXTI_Exported_Functions_Group1 Configuration functions + * @brief Configuration functions + * @{ + */ +/* Configuration functions ****************************************************/ +HAL_StatusTypeDef HAL_EXTI_SetConfigLine(EXTI_HandleTypeDef *hexti, EXTI_ConfigTypeDef *pExtiConfig); +HAL_StatusTypeDef HAL_EXTI_GetConfigLine(EXTI_HandleTypeDef *hexti, EXTI_ConfigTypeDef *pExtiConfig); +HAL_StatusTypeDef HAL_EXTI_ClearConfigLine(EXTI_HandleTypeDef *hexti); +HAL_StatusTypeDef HAL_EXTI_RegisterCallback(EXTI_HandleTypeDef *hexti, EXTI_CallbackIDTypeDef CallbackID, void (*pPendingCbfn)(void)); +HAL_StatusTypeDef HAL_EXTI_GetHandle(EXTI_HandleTypeDef *hexti, uint32_t ExtiLine); +/** + * @} + */ + +/** @defgroup EXTI_Exported_Functions_Group2 IO operation functions + * @brief IO operation functions + * @{ + */ +/* IO operation functions *****************************************************/ +void HAL_EXTI_IRQHandler(EXTI_HandleTypeDef *hexti); +uint32_t HAL_EXTI_GetPending(EXTI_HandleTypeDef *hexti, uint32_t Edge); +void HAL_EXTI_ClearPending(EXTI_HandleTypeDef *hexti, uint32_t Edge); +void HAL_EXTI_GenerateSWI(EXTI_HandleTypeDef *hexti); + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32L4xx_HAL_EXTI_H */ + diff --git a/CablePositioning_IAP_V1.0/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash.h b/CablePositioning_IAP_V1.0/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash.h index 37fe9e4..73b0ce5 100644 --- a/CablePositioning_IAP_V1.0/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash.h +++ b/CablePositioning_IAP_V1.0/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash.h @@ -1,1028 +1,1028 @@ -/** - ****************************************************************************** - * @file stm32l4xx_hal_flash.h - * @author MCD Application Team - * @brief Header file of FLASH HAL module. - ****************************************************************************** - * @attention - * - * Copyright (c) 2017 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file in - * the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef STM32L4xx_HAL_FLASH_H -#define STM32L4xx_HAL_FLASH_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32l4xx_hal_def.h" - -/** @addtogroup STM32L4xx_HAL_Driver - * @{ - */ - -/** @addtogroup FLASH - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ -/** @defgroup FLASH_Exported_Types FLASH Exported Types - * @{ - */ - -/** - * @brief FLASH Erase structure definition - */ -typedef struct -{ - uint32_t TypeErase; /*!< Mass erase or page erase. - This parameter can be a value of @ref FLASH_Type_Erase */ - uint32_t Banks; /*!< Select bank to erase. - This parameter must be a value of @ref FLASH_Banks - (FLASH_BANK_BOTH should be used only for mass erase) */ - uint32_t Page; /*!< Initial Flash page to erase when page erase is disabled - This parameter must be a value between 0 and (max number of pages in the bank - 1) - (eg : 255 for 1MB dual bank) */ - uint32_t NbPages; /*!< Number of pages to be erased. - This parameter must be a value between 1 and (max number of pages in the bank - value of initial page)*/ -} FLASH_EraseInitTypeDef; - -/** - * @brief FLASH Option Bytes Program structure definition - */ -typedef struct -{ - uint32_t OptionType; /*!< Option byte to be configured. - This parameter can be a combination of the values of @ref FLASH_OB_Type */ - uint32_t WRPArea; /*!< Write protection area to be programmed (used for OPTIONBYTE_WRP). - Only one WRP area could be programmed at the same time. - This parameter can be value of @ref FLASH_OB_WRP_Area */ - uint32_t WRPStartOffset; /*!< Write protection start offset (used for OPTIONBYTE_WRP). - This parameter must be a value between 0 and (max number of pages in the bank - 1) - (eg : 25 for 1MB dual bank) */ - uint32_t WRPEndOffset; /*!< Write protection end offset (used for OPTIONBYTE_WRP). - This parameter must be a value between WRPStartOffset and (max number of pages in the bank - 1) */ - uint32_t RDPLevel; /*!< Set the read protection level.. (used for OPTIONBYTE_RDP). - This parameter can be a value of @ref FLASH_OB_Read_Protection */ - uint32_t USERType; /*!< User option byte(s) to be configured (used for OPTIONBYTE_USER). - This parameter can be a combination of @ref FLASH_OB_USER_Type */ - uint32_t USERConfig; /*!< Value of the user option byte (used for OPTIONBYTE_USER). - This parameter can be a combination of @ref FLASH_OB_USER_BOR_LEVEL, - @ref FLASH_OB_USER_nRST_STOP, @ref FLASH_OB_USER_nRST_STANDBY, - @ref FLASH_OB_USER_nRST_SHUTDOWN, @ref FLASH_OB_USER_IWDG_SW, - @ref FLASH_OB_USER_IWDG_STOP, @ref FLASH_OB_USER_IWDG_STANDBY, - @ref FLASH_OB_USER_WWDG_SW, @ref FLASH_OB_USER_BFB2, - @ref FLASH_OB_USER_DUALBANK, @ref FLASH_OB_USER_nBOOT1, - @ref FLASH_OB_USER_SRAM2_PE, @ref FLASH_OB_USER_SRAM2_RST, - @ref FLASH_OB_USER_nSWBOOT0 and @ref FLASH_OB_USER_nBOOT0 */ - uint32_t PCROPConfig; /*!< Configuration of the PCROP (used for OPTIONBYTE_PCROP). - This parameter must be a combination of @ref FLASH_Banks (except FLASH_BANK_BOTH) - and @ref FLASH_OB_PCROP_RDP */ - uint32_t PCROPStartAddr; /*!< PCROP Start address (used for OPTIONBYTE_PCROP). - This parameter must be a value between begin and end of bank - => Be careful of the bank swapping for the address */ - uint32_t PCROPEndAddr; /*!< PCROP End address (used for OPTIONBYTE_PCROP). - This parameter must be a value between PCROP Start address and end of bank */ -} FLASH_OBProgramInitTypeDef; - -/** - * @brief FLASH Procedure structure definition - */ -typedef enum -{ - FLASH_PROC_NONE = 0, - FLASH_PROC_PAGE_ERASE, - FLASH_PROC_MASS_ERASE, - FLASH_PROC_PROGRAM, - FLASH_PROC_PROGRAM_LAST -} FLASH_ProcedureTypeDef; - -/** - * @brief FLASH Cache structure definition - */ -typedef enum -{ - FLASH_CACHE_DISABLED = 0, - FLASH_CACHE_ICACHE_ENABLED, - FLASH_CACHE_DCACHE_ENABLED, - FLASH_CACHE_ICACHE_DCACHE_ENABLED -} FLASH_CacheTypeDef; - -/** - * @brief FLASH handle Structure definition - */ -typedef struct -{ - HAL_LockTypeDef Lock; /* FLASH locking object */ - __IO uint32_t ErrorCode; /* FLASH error code */ - __IO FLASH_ProcedureTypeDef ProcedureOnGoing; /* Internal variable to indicate which procedure is ongoing or not in IT context */ - __IO uint32_t Address; /* Internal variable to save address selected for program in IT context */ - __IO uint32_t Bank; /* Internal variable to save current bank selected during erase in IT context */ - __IO uint32_t Page; /* Internal variable to define the current page which is erasing in IT context */ - __IO uint32_t NbPagesToErase; /* Internal variable to save the remaining pages to erase in IT context */ - __IO FLASH_CacheTypeDef CacheToReactivate; /* Internal variable to indicate which caches should be reactivated */ -}FLASH_ProcessTypeDef; - -/** - * @} - */ - -/* Exported constants --------------------------------------------------------*/ -/** @defgroup FLASH_Exported_Constants FLASH Exported Constants - * @{ - */ - -/** @defgroup FLASH_Error FLASH Error - * @{ - */ -#define HAL_FLASH_ERROR_NONE 0x00000000U -#define HAL_FLASH_ERROR_OP FLASH_FLAG_OPERR -#define HAL_FLASH_ERROR_PROG FLASH_FLAG_PROGERR -#define HAL_FLASH_ERROR_WRP FLASH_FLAG_WRPERR -#define HAL_FLASH_ERROR_PGA FLASH_FLAG_PGAERR -#define HAL_FLASH_ERROR_SIZ FLASH_FLAG_SIZERR -#define HAL_FLASH_ERROR_PGS FLASH_FLAG_PGSERR -#define HAL_FLASH_ERROR_MIS FLASH_FLAG_MISERR -#define HAL_FLASH_ERROR_FAST FLASH_FLAG_FASTERR -#define HAL_FLASH_ERROR_RD FLASH_FLAG_RDERR -#define HAL_FLASH_ERROR_OPTV FLASH_FLAG_OPTVERR -#define HAL_FLASH_ERROR_ECCC FLASH_FLAG_ECCC -#define HAL_FLASH_ERROR_ECCD FLASH_FLAG_ECCD -#if defined (STM32L412xx) || defined (STM32L422xx) || defined (STM32L431xx) || defined (STM32L432xx) || defined (STM32L433xx) || defined (STM32L442xx) || \ - defined (STM32L443xx) || defined (STM32L451xx) || defined (STM32L452xx) || defined (STM32L462xx) || defined (STM32L496xx) || defined (STM32L4A6xx) || \ - defined (STM32L4P5xx) || defined (STM32L4Q5xx) || defined (STM32L4R5xx) || defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || \ - defined (STM32L4S7xx) || defined (STM32L4S9xx) -#define HAL_FLASH_ERROR_PEMPTY FLASH_FLAG_PEMPTY -#endif -/** - * @} - */ - -/** @defgroup FLASH_Type_Erase FLASH Erase Type - * @{ - */ -#define FLASH_TYPEERASE_PAGES ((uint32_t)0x00) /*!> 24) /*!< ECC Correction Interrupt source */ -/** - * @} - */ - -/* Exported macros -----------------------------------------------------------*/ -/** @defgroup FLASH_Exported_Macros FLASH Exported Macros - * @brief macros to control FLASH features - * @{ - */ - -/** - * @brief Set the FLASH Latency. - * @param __LATENCY__ FLASH Latency - * This parameter can be one of the following values : - * @arg FLASH_LATENCY_0: FLASH Zero wait state - * @arg FLASH_LATENCY_1: FLASH One wait state - * @arg FLASH_LATENCY_2: FLASH Two wait states - * @arg FLASH_LATENCY_3: FLASH Three wait states - * @arg FLASH_LATENCY_4: FLASH Four wait states - * @retval None - */ -#define __HAL_FLASH_SET_LATENCY(__LATENCY__) (MODIFY_REG(FLASH->ACR, FLASH_ACR_LATENCY, (__LATENCY__))) - -/** - * @brief Get the FLASH Latency. - * @retval FLASH Latency - * This parameter can be one of the following values : - * @arg FLASH_LATENCY_0: FLASH Zero wait state - * @arg FLASH_LATENCY_1: FLASH One wait state - * @arg FLASH_LATENCY_2: FLASH Two wait states - * @arg FLASH_LATENCY_3: FLASH Three wait states - * @arg FLASH_LATENCY_4: FLASH Four wait states - */ -#define __HAL_FLASH_GET_LATENCY() READ_BIT(FLASH->ACR, FLASH_ACR_LATENCY) - -/** - * @brief Enable the FLASH prefetch buffer. - * @retval None - */ -#define __HAL_FLASH_PREFETCH_BUFFER_ENABLE() SET_BIT(FLASH->ACR, FLASH_ACR_PRFTEN) - -/** - * @brief Disable the FLASH prefetch buffer. - * @retval None - */ -#define __HAL_FLASH_PREFETCH_BUFFER_DISABLE() CLEAR_BIT(FLASH->ACR, FLASH_ACR_PRFTEN) - -/** - * @brief Enable the FLASH instruction cache. - * @retval none - */ -#define __HAL_FLASH_INSTRUCTION_CACHE_ENABLE() SET_BIT(FLASH->ACR, FLASH_ACR_ICEN) - -/** - * @brief Disable the FLASH instruction cache. - * @retval none - */ -#define __HAL_FLASH_INSTRUCTION_CACHE_DISABLE() CLEAR_BIT(FLASH->ACR, FLASH_ACR_ICEN) - -/** - * @brief Enable the FLASH data cache. - * @retval none - */ -#define __HAL_FLASH_DATA_CACHE_ENABLE() SET_BIT(FLASH->ACR, FLASH_ACR_DCEN) - -/** - * @brief Disable the FLASH data cache. - * @retval none - */ -#define __HAL_FLASH_DATA_CACHE_DISABLE() CLEAR_BIT(FLASH->ACR, FLASH_ACR_DCEN) - -/** - * @brief Reset the FLASH instruction Cache. - * @note This function must be used only when the Instruction Cache is disabled. - * @retval None - */ -#define __HAL_FLASH_INSTRUCTION_CACHE_RESET() do { SET_BIT(FLASH->ACR, FLASH_ACR_ICRST); \ - CLEAR_BIT(FLASH->ACR, FLASH_ACR_ICRST); \ - } while (0) - -/** - * @brief Reset the FLASH data Cache. - * @note This function must be used only when the data Cache is disabled. - * @retval None - */ -#define __HAL_FLASH_DATA_CACHE_RESET() do { SET_BIT(FLASH->ACR, FLASH_ACR_DCRST); \ - CLEAR_BIT(FLASH->ACR, FLASH_ACR_DCRST); \ - } while (0) - -/** - * @brief Enable the FLASH power down during Low-power run mode. - * @note Writing this bit to 0 this bit, automatically the keys are - * loss and a new unlock sequence is necessary to re-write it to 1. - */ -#define __HAL_FLASH_POWER_DOWN_ENABLE() do { WRITE_REG(FLASH->PDKEYR, FLASH_PDKEY1); \ - WRITE_REG(FLASH->PDKEYR, FLASH_PDKEY2); \ - SET_BIT(FLASH->ACR, FLASH_ACR_RUN_PD); \ - } while (0) - -/** - * @brief Disable the FLASH power down during Low-power run mode. - * @note Writing this bit to 0 this bit, automatically the keys are - * loss and a new unlock sequence is necessary to re-write it to 1. - */ -#define __HAL_FLASH_POWER_DOWN_DISABLE() do { WRITE_REG(FLASH->PDKEYR, FLASH_PDKEY1); \ - WRITE_REG(FLASH->PDKEYR, FLASH_PDKEY2); \ - CLEAR_BIT(FLASH->ACR, FLASH_ACR_RUN_PD); \ - } while (0) - -/** - * @brief Enable the FLASH power down during Low-Power sleep mode - * @retval none - */ -#define __HAL_FLASH_SLEEP_POWERDOWN_ENABLE() SET_BIT(FLASH->ACR, FLASH_ACR_SLEEP_PD) - -/** - * @brief Disable the FLASH power down during Low-Power sleep mode - * @retval none - */ -#define __HAL_FLASH_SLEEP_POWERDOWN_DISABLE() CLEAR_BIT(FLASH->ACR, FLASH_ACR_SLEEP_PD) - -/** - * @} - */ - -/** @defgroup FLASH_Interrupt FLASH Interrupts Macros - * @brief macros to handle FLASH interrupts - * @{ - */ - -/** - * @brief Enable the specified FLASH interrupt. - * @param __INTERRUPT__ FLASH interrupt - * This parameter can be any combination of the following values: - * @arg FLASH_IT_EOP: End of FLASH Operation Interrupt - * @arg FLASH_IT_OPERR: Error Interrupt - * @arg FLASH_IT_RDERR: PCROP Read Error Interrupt - * @arg FLASH_IT_ECCC: ECC Correction Interrupt - * @retval none - */ -#define __HAL_FLASH_ENABLE_IT(__INTERRUPT__) do { if(((__INTERRUPT__) & FLASH_IT_ECCC) != 0U) { SET_BIT(FLASH->ECCR, FLASH_ECCR_ECCIE); }\ - if(((__INTERRUPT__) & (~FLASH_IT_ECCC)) != 0U) { SET_BIT(FLASH->CR, ((__INTERRUPT__) & (~FLASH_IT_ECCC))); }\ - } while(0) - -/** - * @brief Disable the specified FLASH interrupt. - * @param __INTERRUPT__ FLASH interrupt - * This parameter can be any combination of the following values: - * @arg FLASH_IT_EOP: End of FLASH Operation Interrupt - * @arg FLASH_IT_OPERR: Error Interrupt - * @arg FLASH_IT_RDERR: PCROP Read Error Interrupt - * @arg FLASH_IT_ECCC: ECC Correction Interrupt - * @retval none - */ -#define __HAL_FLASH_DISABLE_IT(__INTERRUPT__) do { if(((__INTERRUPT__) & FLASH_IT_ECCC) != 0U) { CLEAR_BIT(FLASH->ECCR, FLASH_ECCR_ECCIE); }\ - if(((__INTERRUPT__) & (~FLASH_IT_ECCC)) != 0U) { CLEAR_BIT(FLASH->CR, ((__INTERRUPT__) & (~FLASH_IT_ECCC))); }\ - } while(0) - -/** - * @brief Check whether the specified FLASH flag is set or not. - * @param __FLAG__ specifies the FLASH flag to check. - * This parameter can be one of the following values: - * @arg FLASH_FLAG_EOP: FLASH End of Operation flag - * @arg FLASH_FLAG_OPERR: FLASH Operation error flag - * @arg FLASH_FLAG_PROGERR: FLASH Programming error flag - * @arg FLASH_FLAG_WRPERR: FLASH Write protection error flag - * @arg FLASH_FLAG_PGAERR: FLASH Programming alignment error flag - * @arg FLASH_FLAG_SIZERR: FLASH Size error flag - * @arg FLASH_FLAG_PGSERR: FLASH Programming sequence error flag - * @arg FLASH_FLAG_MISERR: FLASH Fast programming data miss error flag - * @arg FLASH_FLAG_FASTERR: FLASH Fast programming error flag - * @arg FLASH_FLAG_RDERR: FLASH PCROP read error flag - * @arg FLASH_FLAG_OPTVERR: FLASH Option validity error flag - * @arg FLASH_FLAG_BSY: FLASH write/erase operations in progress flag - * @arg FLASH_FLAG_PEMPTY : FLASH Boot from not programmed flash (apply only for STM32L43x/STM32L44x devices) - * @arg FLASH_FLAG_ECCC: FLASH one ECC error has been detected and corrected - * @arg FLASH_FLAG_ECCD: FLASH two ECC errors have been detected - * @retval The new state of FLASH_FLAG (SET or RESET). - */ -#define __HAL_FLASH_GET_FLAG(__FLAG__) ((((__FLAG__) & FLASH_FLAG_ECCR_ERRORS) != 0U) ? \ - (READ_BIT(FLASH->ECCR, (__FLAG__)) != 0U) : \ - (READ_BIT(FLASH->SR, (__FLAG__)) != 0U)) - -/** - * @brief Clear the FLASH's pending flags. - * @param __FLAG__ specifies the FLASH flags to clear. - * This parameter can be any combination of the following values: - * @arg FLASH_FLAG_EOP: FLASH End of Operation flag - * @arg FLASH_FLAG_OPERR: FLASH Operation error flag - * @arg FLASH_FLAG_PROGERR: FLASH Programming error flag - * @arg FLASH_FLAG_WRPERR: FLASH Write protection error flag - * @arg FLASH_FLAG_PGAERR: FLASH Programming alignment error flag - * @arg FLASH_FLAG_SIZERR: FLASH Size error flag - * @arg FLASH_FLAG_PGSERR: FLASH Programming sequence error flag - * @arg FLASH_FLAG_MISERR: FLASH Fast programming data miss error flag - * @arg FLASH_FLAG_FASTERR: FLASH Fast programming error flag - * @arg FLASH_FLAG_RDERR: FLASH PCROP read error flag - * @arg FLASH_FLAG_OPTVERR: FLASH Option validity error flag - * @arg FLASH_FLAG_ECCC: FLASH one ECC error has been detected and corrected - * @arg FLASH_FLAG_ECCD: FLASH two ECC errors have been detected - * @arg FLASH_FLAG_ALL_ERRORS: FLASH All errors flags - * @retval None - */ -#define __HAL_FLASH_CLEAR_FLAG(__FLAG__) do { if(((__FLAG__) & FLASH_FLAG_ECCR_ERRORS) != 0U) { SET_BIT(FLASH->ECCR, ((__FLAG__) & FLASH_FLAG_ECCR_ERRORS)); }\ - if(((__FLAG__) & ~(FLASH_FLAG_ECCR_ERRORS)) != 0U) { WRITE_REG(FLASH->SR, ((__FLAG__) & ~(FLASH_FLAG_ECCR_ERRORS))); }\ - } while(0) -/** - * @} - */ - -/* Include FLASH HAL Extended module */ -#include "stm32l4xx_hal_flash_ex.h" -#include "stm32l4xx_hal_flash_ramfunc.h" - -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup FLASH_Exported_Functions - * @{ - */ - -/* Program operation functions ***********************************************/ -/** @addtogroup FLASH_Exported_Functions_Group1 - * @{ - */ -HAL_StatusTypeDef HAL_FLASH_Program(uint32_t TypeProgram, uint32_t Address, uint64_t Data); -HAL_StatusTypeDef HAL_FLASH_Program_IT(uint32_t TypeProgram, uint32_t Address, uint64_t Data); -/* FLASH IRQ handler method */ -void HAL_FLASH_IRQHandler(void); -/* Callbacks in non blocking modes */ -void HAL_FLASH_EndOfOperationCallback(uint32_t ReturnValue); -void HAL_FLASH_OperationErrorCallback(uint32_t ReturnValue); -/** - * @} - */ - -/* Peripheral Control functions **********************************************/ -/** @addtogroup FLASH_Exported_Functions_Group2 - * @{ - */ -HAL_StatusTypeDef HAL_FLASH_Unlock(void); -HAL_StatusTypeDef HAL_FLASH_Lock(void); -/* Option bytes control */ -HAL_StatusTypeDef HAL_FLASH_OB_Unlock(void); -HAL_StatusTypeDef HAL_FLASH_OB_Lock(void); -HAL_StatusTypeDef HAL_FLASH_OB_Launch(void); -/** - * @} - */ - -/* Peripheral State functions ************************************************/ -/** @addtogroup FLASH_Exported_Functions_Group3 - * @{ - */ -uint32_t HAL_FLASH_GetError(void); -/** - * @} - */ - -/** - * @} - */ - -/* Private variables ---------------------------------------------------------*/ -/** @addtogroup FLASH_Private_Variables FLASH Private Variables - * @{ - */ -extern FLASH_ProcessTypeDef pFlash; -/** - * @} - */ - -/* Private function ----------------------------------------------------------*/ -/** @addtogroup FLASH_Private_Functions FLASH Private Functions - * @{ - */ -HAL_StatusTypeDef FLASH_WaitForLastOperation(uint32_t Timeout); -/** - * @} - */ - -/* Private constants --------------------------------------------------------*/ -/** @defgroup FLASH_Private_Constants FLASH Private Constants - * @{ - */ -#if defined (STM32L471xx) || defined (STM32L475xx) || defined (STM32L476xx) || defined (STM32L485xx) || defined (STM32L486xx) || \ - defined (STM32L496xx) || defined (STM32L4A6xx) || defined (STM32L4P5xx) || defined (STM32L4Q5xx) || defined (STM32L4R5xx) || \ - defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined (STM32L4S9xx) -#define FLASH_BANK_SIZE (FLASH_SIZE >> 1U) -#else -#define FLASH_BANK_SIZE (FLASH_SIZE) -#endif - -#if defined (STM32L4P5xx) || defined (STM32L4Q5xx) || defined (STM32L4R5xx) || defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined (STM32L4S9xx) -#define FLASH_PAGE_SIZE ((uint32_t)0x1000) -#define FLASH_PAGE_SIZE_128_BITS ((uint32_t)0x2000) -#else -#define FLASH_PAGE_SIZE ((uint32_t)0x800) -#endif - -#define FLASH_TIMEOUT_VALUE ((uint32_t)50000)/* 50 s */ -/** - * @} - */ - -/* Private macros ------------------------------------------------------------*/ -/** @defgroup FLASH_Private_Macros FLASH Private Macros - * @{ - */ - -#define IS_FLASH_TYPEERASE(VALUE) (((VALUE) == FLASH_TYPEERASE_PAGES) || \ - ((VALUE) == FLASH_TYPEERASE_MASSERASE)) - -#if defined (STM32L471xx) || defined (STM32L475xx) || defined (STM32L476xx) || defined (STM32L485xx) || defined (STM32L486xx) || \ - defined (STM32L496xx) || defined (STM32L4A6xx) || defined (STM32L4P5xx) || defined (STM32L4Q5xx) || defined (STM32L4R5xx) || \ - defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined (STM32L4S9xx) -#define IS_FLASH_BANK(BANK) (((BANK) == FLASH_BANK_1) || \ - ((BANK) == FLASH_BANK_2) || \ - ((BANK) == FLASH_BANK_BOTH)) - -#define IS_FLASH_BANK_EXCLUSIVE(BANK) (((BANK) == FLASH_BANK_1) || \ - ((BANK) == FLASH_BANK_2)) -#else -#define IS_FLASH_BANK(BANK) ((BANK) == FLASH_BANK_1) - -#define IS_FLASH_BANK_EXCLUSIVE(BANK) ((BANK) == FLASH_BANK_1) -#endif - -#define IS_FLASH_TYPEPROGRAM(VALUE) (((VALUE) == FLASH_TYPEPROGRAM_DOUBLEWORD) || \ - ((VALUE) == FLASH_TYPEPROGRAM_FAST) || \ - ((VALUE) == FLASH_TYPEPROGRAM_FAST_AND_LAST)) - -#if defined (STM32L4R5xx) || defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined (STM32L4S9xx) -#define IS_FLASH_MAIN_MEM_ADDRESS(ADDRESS) (((ADDRESS) >= (FLASH_BASE)) && ((ADDRESS) <= (FLASH_BASE+0x1FFFFFU))) -#else -#define IS_FLASH_MAIN_MEM_ADDRESS(ADDRESS) (((ADDRESS) >= (FLASH_BASE)) && ((((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) & (0x0FFFU)) == 0x400U) ? \ - ((ADDRESS) <= (FLASH_BASE+0xFFFFFU)) : ((((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) & (0x0FFFU)) == 0x200U) ? \ - ((ADDRESS) <= (FLASH_BASE+0x7FFFFU)) : ((((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) & (0x0FFFU)) == 0x100U) ? \ - ((ADDRESS) <= (FLASH_BASE+0x3FFFFU)) : ((((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) & (0x0FFFU)) == 0x80U) ? \ - ((ADDRESS) <= (FLASH_BASE+0x1FFFFU)) : ((ADDRESS) <= (FLASH_BASE+0xFFFFFU))))))) -#endif - -#define IS_FLASH_OTP_ADDRESS(ADDRESS) (((ADDRESS) >= 0x1FFF7000U) && ((ADDRESS) <= 0x1FFF73FFU)) - -#define IS_FLASH_PROGRAM_ADDRESS(ADDRESS) ((IS_FLASH_MAIN_MEM_ADDRESS(ADDRESS)) || (IS_FLASH_OTP_ADDRESS(ADDRESS))) - -#if defined (STM32L4R5xx) || defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined (STM32L4S9xx) -#define IS_FLASH_PAGE(PAGE) ((PAGE) < 256U) -#elif defined(STM32L471xx) || defined(STM32L475xx) || defined(STM32L476xx) || defined(STM32L485xx) || defined(STM32L486xx) || defined(STM32L496xx) || defined(STM32L4A6xx) || defined (STM32L4P5xx) || defined (STM32L4Q5xx) -#define IS_FLASH_PAGE(PAGE) (((((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) & (0x0FFFU)) == 0x400U) ? ((PAGE) < 256U) : \ - ((((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) & (0x0FFFU)) == 0x200U) ? ((PAGE) < 128U) : \ - ((((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) & (0x0FFFU)) == 0x100U) ? ((PAGE) < 64U) : \ - ((PAGE) < 256U))))) -#elif defined (STM32L451xx) || defined (STM32L452xx) || defined (STM32L462xx) -#define IS_FLASH_PAGE(PAGE) (((((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) & (0x0FFFU)) == 0x200U) ? ((PAGE) < 256U) : \ - ((((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) & (0x0FFFU)) == 0x100U) ? ((PAGE) < 128U) : \ - ((PAGE) < 256U)))) -#else -#define IS_FLASH_PAGE(PAGE) (((((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) & (0x0FFFU)) == 0x100U) ? ((PAGE) < 128U) : \ - ((((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) & (0x0FFFU)) == 0x80U) ? ((PAGE) < 64U) : \ - ((PAGE) < 128U)))) -#endif - -#define IS_OPTIONBYTE(VALUE) (((VALUE) <= (OPTIONBYTE_WRP | OPTIONBYTE_RDP | OPTIONBYTE_USER | OPTIONBYTE_PCROP))) - -#if defined (STM32L471xx) || defined (STM32L475xx) || defined (STM32L476xx) || defined (STM32L485xx) || defined (STM32L486xx) || \ - defined (STM32L496xx) || defined (STM32L4A6xx) || defined (STM32L4P5xx) || defined (STM32L4Q5xx) || defined (STM32L4R5xx) || \ - defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined (STM32L4S9xx) -#define IS_OB_WRPAREA(VALUE) (((VALUE) == OB_WRPAREA_BANK1_AREAA) || ((VALUE) == OB_WRPAREA_BANK1_AREAB) || \ - ((VALUE) == OB_WRPAREA_BANK2_AREAA) || ((VALUE) == OB_WRPAREA_BANK2_AREAB)) -#else -#define IS_OB_WRPAREA(VALUE) (((VALUE) == OB_WRPAREA_BANK1_AREAA) || ((VALUE) == OB_WRPAREA_BANK1_AREAB)) -#endif - -#define IS_OB_RDP_LEVEL(LEVEL) (((LEVEL) == OB_RDP_LEVEL_0) ||\ - ((LEVEL) == OB_RDP_LEVEL_1)/* ||\ - ((LEVEL) == OB_RDP_LEVEL_2)*/) - -#if defined (STM32L4P5xx) || defined (STM32L4Q5xx) || defined (STM32L4R5xx) || defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined (STM32L4S9xx) -#define IS_OB_USER_TYPE(TYPE) (((TYPE) <= (uint32_t)0xFFFFU) && ((TYPE) != 0U)) -#elif defined(STM32L471xx) || defined(STM32L475xx) || defined(STM32L476xx) || defined(STM32L485xx) || defined(STM32L486xx) || defined(STM32L496xx) || defined(STM32L4A6xx) -#define IS_OB_USER_TYPE(TYPE) (((TYPE) <= (uint32_t)0x1FFFU) && ((TYPE) != 0U)) -#else -#define IS_OB_USER_TYPE(TYPE) (((TYPE) <= (uint32_t)0x7E7FU) && ((TYPE) != 0U) && (((TYPE)&0x0180U) == 0U)) -#endif - -#define IS_OB_USER_BOR_LEVEL(LEVEL) (((LEVEL) == OB_BOR_LEVEL_0) || ((LEVEL) == OB_BOR_LEVEL_1) || \ - ((LEVEL) == OB_BOR_LEVEL_2) || ((LEVEL) == OB_BOR_LEVEL_3) || \ - ((LEVEL) == OB_BOR_LEVEL_4)) - -#define IS_OB_USER_STOP(VALUE) (((VALUE) == OB_STOP_RST) || ((VALUE) == OB_STOP_NORST)) - -#define IS_OB_USER_STANDBY(VALUE) (((VALUE) == OB_STANDBY_RST) || ((VALUE) == OB_STANDBY_NORST)) - -#define IS_OB_USER_SHUTDOWN(VALUE) (((VALUE) == OB_SHUTDOWN_RST) || ((VALUE) == OB_SHUTDOWN_NORST)) - -#define IS_OB_USER_IWDG(VALUE) (((VALUE) == OB_IWDG_HW) || ((VALUE) == OB_IWDG_SW)) - -#define IS_OB_USER_IWDG_STOP(VALUE) (((VALUE) == OB_IWDG_STOP_FREEZE) || ((VALUE) == OB_IWDG_STOP_RUN)) - -#define IS_OB_USER_IWDG_STDBY(VALUE) (((VALUE) == OB_IWDG_STDBY_FREEZE) || ((VALUE) == OB_IWDG_STDBY_RUN)) - -#define IS_OB_USER_WWDG(VALUE) (((VALUE) == OB_WWDG_HW) || ((VALUE) == OB_WWDG_SW)) - -#if defined (STM32L471xx) || defined (STM32L475xx) || defined (STM32L476xx) || defined (STM32L485xx) || defined (STM32L486xx) || \ - defined (STM32L496xx) || defined (STM32L4A6xx) || defined (STM32L4P5xx) || defined (STM32L4Q5xx) || defined (STM32L4R5xx) || \ - defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined (STM32L4S9xx) -#define IS_OB_USER_BFB2(VALUE) (((VALUE) == OB_BFB2_DISABLE) || ((VALUE) == OB_BFB2_ENABLE)) - -#define IS_OB_USER_DUALBANK(VALUE) (((VALUE) == OB_DUALBANK_SINGLE) || ((VALUE) == OB_DUALBANK_DUAL)) -#endif - -#if defined (STM32L4R5xx) || defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined (STM32L4S9xx) -#define IS_OB_USER_DBANK(VALUE) (((VALUE) == OB_DBANK_128_BITS) || ((VALUE) == OB_DBANK_64_BITS)) -#endif - -#define IS_OB_USER_BOOT1(VALUE) (((VALUE) == OB_BOOT1_SRAM) || ((VALUE) == OB_BOOT1_SYSTEM)) - -#define IS_OB_USER_SRAM2_PARITY(VALUE) (((VALUE) == OB_SRAM2_PARITY_ENABLE) || ((VALUE) == OB_SRAM2_PARITY_DISABLE)) - -#define IS_OB_USER_SRAM2_RST(VALUE) (((VALUE) == OB_SRAM2_RST_ERASE) || ((VALUE) == OB_SRAM2_RST_NOT_ERASE)) - -#if defined (STM32L412xx) || defined (STM32L422xx) || defined (STM32L431xx) || defined (STM32L432xx) || defined (STM32L433xx) || \ - defined (STM32L442xx) || defined (STM32L443xx) || defined (STM32L451xx) || defined (STM32L452xx) || defined (STM32L462xx) || \ - defined (STM32L496xx) || defined (STM32L4A6xx) || defined (STM32L4P5xx) || defined (STM32L4Q5xx) || defined (STM32L4R5xx) || \ - defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined (STM32L4S9xx) -#define IS_OB_USER_SWBOOT0(VALUE) (((VALUE) == OB_BOOT0_FROM_OB) || ((VALUE) == OB_BOOT0_FROM_PIN)) - -#define IS_OB_USER_BOOT0(VALUE) (((VALUE) == OB_BOOT0_RESET) || ((VALUE) == OB_BOOT0_SET)) -#endif - -#define IS_OB_PCROP_RDP(VALUE) (((VALUE) == OB_PCROP_RDP_NOT_ERASE) || ((VALUE) == OB_PCROP_RDP_ERASE)) - -#if defined (STM32L4P5xx) || defined (STM32L4Q5xx) || defined (STM32L4R5xx) || defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined (STM32L4S9xx) -#define IS_FLASH_LATENCY(LATENCY) (((LATENCY) == FLASH_LATENCY_0) || ((LATENCY) == FLASH_LATENCY_1) || \ - ((LATENCY) == FLASH_LATENCY_2) || ((LATENCY) == FLASH_LATENCY_3) || \ - ((LATENCY) == FLASH_LATENCY_4) || ((LATENCY) == FLASH_LATENCY_5) || \ - ((LATENCY) == FLASH_LATENCY_6) || ((LATENCY) == FLASH_LATENCY_7) || \ - ((LATENCY) == FLASH_LATENCY_8) || ((LATENCY) == FLASH_LATENCY_9) || \ - ((LATENCY) == FLASH_LATENCY_10) || ((LATENCY) == FLASH_LATENCY_11) || \ - ((LATENCY) == FLASH_LATENCY_12) || ((LATENCY) == FLASH_LATENCY_13) || \ - ((LATENCY) == FLASH_LATENCY_14) || ((LATENCY) == FLASH_LATENCY_15)) -#else -#define IS_FLASH_LATENCY(LATENCY) (((LATENCY) == FLASH_LATENCY_0) || \ - ((LATENCY) == FLASH_LATENCY_1) || \ - ((LATENCY) == FLASH_LATENCY_2) || \ - ((LATENCY) == FLASH_LATENCY_3) || \ - ((LATENCY) == FLASH_LATENCY_4)) -#endif -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /* STM32L4xx_HAL_FLASH_H */ - +/** + ****************************************************************************** + * @file stm32l4xx_hal_flash.h + * @author MCD Application Team + * @brief Header file of FLASH HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file in + * the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32L4xx_HAL_FLASH_H +#define STM32L4xx_HAL_FLASH_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l4xx_hal_def.h" + +/** @addtogroup STM32L4xx_HAL_Driver + * @{ + */ + +/** @addtogroup FLASH + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup FLASH_Exported_Types FLASH Exported Types + * @{ + */ + +/** + * @brief FLASH Erase structure definition + */ +typedef struct +{ + uint32_t TypeErase; /*!< Mass erase or page erase. + This parameter can be a value of @ref FLASH_Type_Erase */ + uint32_t Banks; /*!< Select bank to erase. + This parameter must be a value of @ref FLASH_Banks + (FLASH_BANK_BOTH should be used only for mass erase) */ + uint32_t Page; /*!< Initial Flash page to erase when page erase is disabled + This parameter must be a value between 0 and (max number of pages in the bank - 1) + (eg : 255 for 1MB dual bank) */ + uint32_t NbPages; /*!< Number of pages to be erased. + This parameter must be a value between 1 and (max number of pages in the bank - value of initial page)*/ +} FLASH_EraseInitTypeDef; + +/** + * @brief FLASH Option Bytes Program structure definition + */ +typedef struct +{ + uint32_t OptionType; /*!< Option byte to be configured. + This parameter can be a combination of the values of @ref FLASH_OB_Type */ + uint32_t WRPArea; /*!< Write protection area to be programmed (used for OPTIONBYTE_WRP). + Only one WRP area could be programmed at the same time. + This parameter can be value of @ref FLASH_OB_WRP_Area */ + uint32_t WRPStartOffset; /*!< Write protection start offset (used for OPTIONBYTE_WRP). + This parameter must be a value between 0 and (max number of pages in the bank - 1) + (eg : 25 for 1MB dual bank) */ + uint32_t WRPEndOffset; /*!< Write protection end offset (used for OPTIONBYTE_WRP). + This parameter must be a value between WRPStartOffset and (max number of pages in the bank - 1) */ + uint32_t RDPLevel; /*!< Set the read protection level.. (used for OPTIONBYTE_RDP). + This parameter can be a value of @ref FLASH_OB_Read_Protection */ + uint32_t USERType; /*!< User option byte(s) to be configured (used for OPTIONBYTE_USER). + This parameter can be a combination of @ref FLASH_OB_USER_Type */ + uint32_t USERConfig; /*!< Value of the user option byte (used for OPTIONBYTE_USER). + This parameter can be a combination of @ref FLASH_OB_USER_BOR_LEVEL, + @ref FLASH_OB_USER_nRST_STOP, @ref FLASH_OB_USER_nRST_STANDBY, + @ref FLASH_OB_USER_nRST_SHUTDOWN, @ref FLASH_OB_USER_IWDG_SW, + @ref FLASH_OB_USER_IWDG_STOP, @ref FLASH_OB_USER_IWDG_STANDBY, + @ref FLASH_OB_USER_WWDG_SW, @ref FLASH_OB_USER_BFB2, + @ref FLASH_OB_USER_DUALBANK, @ref FLASH_OB_USER_nBOOT1, + @ref FLASH_OB_USER_SRAM2_PE, @ref FLASH_OB_USER_SRAM2_RST, + @ref FLASH_OB_USER_nSWBOOT0 and @ref FLASH_OB_USER_nBOOT0 */ + uint32_t PCROPConfig; /*!< Configuration of the PCROP (used for OPTIONBYTE_PCROP). + This parameter must be a combination of @ref FLASH_Banks (except FLASH_BANK_BOTH) + and @ref FLASH_OB_PCROP_RDP */ + uint32_t PCROPStartAddr; /*!< PCROP Start address (used for OPTIONBYTE_PCROP). + This parameter must be a value between begin and end of bank + => Be careful of the bank swapping for the address */ + uint32_t PCROPEndAddr; /*!< PCROP End address (used for OPTIONBYTE_PCROP). + This parameter must be a value between PCROP Start address and end of bank */ +} FLASH_OBProgramInitTypeDef; + +/** + * @brief FLASH Procedure structure definition + */ +typedef enum +{ + FLASH_PROC_NONE = 0, + FLASH_PROC_PAGE_ERASE, + FLASH_PROC_MASS_ERASE, + FLASH_PROC_PROGRAM, + FLASH_PROC_PROGRAM_LAST +} FLASH_ProcedureTypeDef; + +/** + * @brief FLASH Cache structure definition + */ +typedef enum +{ + FLASH_CACHE_DISABLED = 0, + FLASH_CACHE_ICACHE_ENABLED, + FLASH_CACHE_DCACHE_ENABLED, + FLASH_CACHE_ICACHE_DCACHE_ENABLED +} FLASH_CacheTypeDef; + +/** + * @brief FLASH handle Structure definition + */ +typedef struct +{ + HAL_LockTypeDef Lock; /* FLASH locking object */ + __IO uint32_t ErrorCode; /* FLASH error code */ + __IO FLASH_ProcedureTypeDef ProcedureOnGoing; /* Internal variable to indicate which procedure is ongoing or not in IT context */ + __IO uint32_t Address; /* Internal variable to save address selected for program in IT context */ + __IO uint32_t Bank; /* Internal variable to save current bank selected during erase in IT context */ + __IO uint32_t Page; /* Internal variable to define the current page which is erasing in IT context */ + __IO uint32_t NbPagesToErase; /* Internal variable to save the remaining pages to erase in IT context */ + __IO FLASH_CacheTypeDef CacheToReactivate; /* Internal variable to indicate which caches should be reactivated */ +}FLASH_ProcessTypeDef; + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup FLASH_Exported_Constants FLASH Exported Constants + * @{ + */ + +/** @defgroup FLASH_Error FLASH Error + * @{ + */ +#define HAL_FLASH_ERROR_NONE 0x00000000U +#define HAL_FLASH_ERROR_OP FLASH_FLAG_OPERR +#define HAL_FLASH_ERROR_PROG FLASH_FLAG_PROGERR +#define HAL_FLASH_ERROR_WRP FLASH_FLAG_WRPERR +#define HAL_FLASH_ERROR_PGA FLASH_FLAG_PGAERR +#define HAL_FLASH_ERROR_SIZ FLASH_FLAG_SIZERR +#define HAL_FLASH_ERROR_PGS FLASH_FLAG_PGSERR +#define HAL_FLASH_ERROR_MIS FLASH_FLAG_MISERR +#define HAL_FLASH_ERROR_FAST FLASH_FLAG_FASTERR +#define HAL_FLASH_ERROR_RD FLASH_FLAG_RDERR +#define HAL_FLASH_ERROR_OPTV FLASH_FLAG_OPTVERR +#define HAL_FLASH_ERROR_ECCC FLASH_FLAG_ECCC +#define HAL_FLASH_ERROR_ECCD FLASH_FLAG_ECCD +#if defined (STM32L412xx) || defined (STM32L422xx) || defined (STM32L431xx) || defined (STM32L432xx) || defined (STM32L433xx) || defined (STM32L442xx) || \ + defined (STM32L443xx) || defined (STM32L451xx) || defined (STM32L452xx) || defined (STM32L462xx) || defined (STM32L496xx) || defined (STM32L4A6xx) || \ + defined (STM32L4P5xx) || defined (STM32L4Q5xx) || defined (STM32L4R5xx) || defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || \ + defined (STM32L4S7xx) || defined (STM32L4S9xx) +#define HAL_FLASH_ERROR_PEMPTY FLASH_FLAG_PEMPTY +#endif +/** + * @} + */ + +/** @defgroup FLASH_Type_Erase FLASH Erase Type + * @{ + */ +#define FLASH_TYPEERASE_PAGES ((uint32_t)0x00) /*!> 24) /*!< ECC Correction Interrupt source */ +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ +/** @defgroup FLASH_Exported_Macros FLASH Exported Macros + * @brief macros to control FLASH features + * @{ + */ + +/** + * @brief Set the FLASH Latency. + * @param __LATENCY__ FLASH Latency + * This parameter can be one of the following values : + * @arg FLASH_LATENCY_0: FLASH Zero wait state + * @arg FLASH_LATENCY_1: FLASH One wait state + * @arg FLASH_LATENCY_2: FLASH Two wait states + * @arg FLASH_LATENCY_3: FLASH Three wait states + * @arg FLASH_LATENCY_4: FLASH Four wait states + * @retval None + */ +#define __HAL_FLASH_SET_LATENCY(__LATENCY__) (MODIFY_REG(FLASH->ACR, FLASH_ACR_LATENCY, (__LATENCY__))) + +/** + * @brief Get the FLASH Latency. + * @retval FLASH Latency + * This parameter can be one of the following values : + * @arg FLASH_LATENCY_0: FLASH Zero wait state + * @arg FLASH_LATENCY_1: FLASH One wait state + * @arg FLASH_LATENCY_2: FLASH Two wait states + * @arg FLASH_LATENCY_3: FLASH Three wait states + * @arg FLASH_LATENCY_4: FLASH Four wait states + */ +#define __HAL_FLASH_GET_LATENCY() READ_BIT(FLASH->ACR, FLASH_ACR_LATENCY) + +/** + * @brief Enable the FLASH prefetch buffer. + * @retval None + */ +#define __HAL_FLASH_PREFETCH_BUFFER_ENABLE() SET_BIT(FLASH->ACR, FLASH_ACR_PRFTEN) + +/** + * @brief Disable the FLASH prefetch buffer. + * @retval None + */ +#define __HAL_FLASH_PREFETCH_BUFFER_DISABLE() CLEAR_BIT(FLASH->ACR, FLASH_ACR_PRFTEN) + +/** + * @brief Enable the FLASH instruction cache. + * @retval none + */ +#define __HAL_FLASH_INSTRUCTION_CACHE_ENABLE() SET_BIT(FLASH->ACR, FLASH_ACR_ICEN) + +/** + * @brief Disable the FLASH instruction cache. + * @retval none + */ +#define __HAL_FLASH_INSTRUCTION_CACHE_DISABLE() CLEAR_BIT(FLASH->ACR, FLASH_ACR_ICEN) + +/** + * @brief Enable the FLASH data cache. + * @retval none + */ +#define __HAL_FLASH_DATA_CACHE_ENABLE() SET_BIT(FLASH->ACR, FLASH_ACR_DCEN) + +/** + * @brief Disable the FLASH data cache. + * @retval none + */ +#define __HAL_FLASH_DATA_CACHE_DISABLE() CLEAR_BIT(FLASH->ACR, FLASH_ACR_DCEN) + +/** + * @brief Reset the FLASH instruction Cache. + * @note This function must be used only when the Instruction Cache is disabled. + * @retval None + */ +#define __HAL_FLASH_INSTRUCTION_CACHE_RESET() do { SET_BIT(FLASH->ACR, FLASH_ACR_ICRST); \ + CLEAR_BIT(FLASH->ACR, FLASH_ACR_ICRST); \ + } while (0) + +/** + * @brief Reset the FLASH data Cache. + * @note This function must be used only when the data Cache is disabled. + * @retval None + */ +#define __HAL_FLASH_DATA_CACHE_RESET() do { SET_BIT(FLASH->ACR, FLASH_ACR_DCRST); \ + CLEAR_BIT(FLASH->ACR, FLASH_ACR_DCRST); \ + } while (0) + +/** + * @brief Enable the FLASH power down during Low-power run mode. + * @note Writing this bit to 0 this bit, automatically the keys are + * loss and a new unlock sequence is necessary to re-write it to 1. + */ +#define __HAL_FLASH_POWER_DOWN_ENABLE() do { WRITE_REG(FLASH->PDKEYR, FLASH_PDKEY1); \ + WRITE_REG(FLASH->PDKEYR, FLASH_PDKEY2); \ + SET_BIT(FLASH->ACR, FLASH_ACR_RUN_PD); \ + } while (0) + +/** + * @brief Disable the FLASH power down during Low-power run mode. + * @note Writing this bit to 0 this bit, automatically the keys are + * loss and a new unlock sequence is necessary to re-write it to 1. + */ +#define __HAL_FLASH_POWER_DOWN_DISABLE() do { WRITE_REG(FLASH->PDKEYR, FLASH_PDKEY1); \ + WRITE_REG(FLASH->PDKEYR, FLASH_PDKEY2); \ + CLEAR_BIT(FLASH->ACR, FLASH_ACR_RUN_PD); \ + } while (0) + +/** + * @brief Enable the FLASH power down during Low-Power sleep mode + * @retval none + */ +#define __HAL_FLASH_SLEEP_POWERDOWN_ENABLE() SET_BIT(FLASH->ACR, FLASH_ACR_SLEEP_PD) + +/** + * @brief Disable the FLASH power down during Low-Power sleep mode + * @retval none + */ +#define __HAL_FLASH_SLEEP_POWERDOWN_DISABLE() CLEAR_BIT(FLASH->ACR, FLASH_ACR_SLEEP_PD) + +/** + * @} + */ + +/** @defgroup FLASH_Interrupt FLASH Interrupts Macros + * @brief macros to handle FLASH interrupts + * @{ + */ + +/** + * @brief Enable the specified FLASH interrupt. + * @param __INTERRUPT__ FLASH interrupt + * This parameter can be any combination of the following values: + * @arg FLASH_IT_EOP: End of FLASH Operation Interrupt + * @arg FLASH_IT_OPERR: Error Interrupt + * @arg FLASH_IT_RDERR: PCROP Read Error Interrupt + * @arg FLASH_IT_ECCC: ECC Correction Interrupt + * @retval none + */ +#define __HAL_FLASH_ENABLE_IT(__INTERRUPT__) do { if(((__INTERRUPT__) & FLASH_IT_ECCC) != 0U) { SET_BIT(FLASH->ECCR, FLASH_ECCR_ECCIE); }\ + if(((__INTERRUPT__) & (~FLASH_IT_ECCC)) != 0U) { SET_BIT(FLASH->CR, ((__INTERRUPT__) & (~FLASH_IT_ECCC))); }\ + } while(0) + +/** + * @brief Disable the specified FLASH interrupt. + * @param __INTERRUPT__ FLASH interrupt + * This parameter can be any combination of the following values: + * @arg FLASH_IT_EOP: End of FLASH Operation Interrupt + * @arg FLASH_IT_OPERR: Error Interrupt + * @arg FLASH_IT_RDERR: PCROP Read Error Interrupt + * @arg FLASH_IT_ECCC: ECC Correction Interrupt + * @retval none + */ +#define __HAL_FLASH_DISABLE_IT(__INTERRUPT__) do { if(((__INTERRUPT__) & FLASH_IT_ECCC) != 0U) { CLEAR_BIT(FLASH->ECCR, FLASH_ECCR_ECCIE); }\ + if(((__INTERRUPT__) & (~FLASH_IT_ECCC)) != 0U) { CLEAR_BIT(FLASH->CR, ((__INTERRUPT__) & (~FLASH_IT_ECCC))); }\ + } while(0) + +/** + * @brief Check whether the specified FLASH flag is set or not. + * @param __FLAG__ specifies the FLASH flag to check. + * This parameter can be one of the following values: + * @arg FLASH_FLAG_EOP: FLASH End of Operation flag + * @arg FLASH_FLAG_OPERR: FLASH Operation error flag + * @arg FLASH_FLAG_PROGERR: FLASH Programming error flag + * @arg FLASH_FLAG_WRPERR: FLASH Write protection error flag + * @arg FLASH_FLAG_PGAERR: FLASH Programming alignment error flag + * @arg FLASH_FLAG_SIZERR: FLASH Size error flag + * @arg FLASH_FLAG_PGSERR: FLASH Programming sequence error flag + * @arg FLASH_FLAG_MISERR: FLASH Fast programming data miss error flag + * @arg FLASH_FLAG_FASTERR: FLASH Fast programming error flag + * @arg FLASH_FLAG_RDERR: FLASH PCROP read error flag + * @arg FLASH_FLAG_OPTVERR: FLASH Option validity error flag + * @arg FLASH_FLAG_BSY: FLASH write/erase operations in progress flag + * @arg FLASH_FLAG_PEMPTY : FLASH Boot from not programmed flash (apply only for STM32L43x/STM32L44x devices) + * @arg FLASH_FLAG_ECCC: FLASH one ECC error has been detected and corrected + * @arg FLASH_FLAG_ECCD: FLASH two ECC errors have been detected + * @retval The new state of FLASH_FLAG (SET or RESET). + */ +#define __HAL_FLASH_GET_FLAG(__FLAG__) ((((__FLAG__) & FLASH_FLAG_ECCR_ERRORS) != 0U) ? \ + (READ_BIT(FLASH->ECCR, (__FLAG__)) != 0U) : \ + (READ_BIT(FLASH->SR, (__FLAG__)) != 0U)) + +/** + * @brief Clear the FLASH's pending flags. + * @param __FLAG__ specifies the FLASH flags to clear. + * This parameter can be any combination of the following values: + * @arg FLASH_FLAG_EOP: FLASH End of Operation flag + * @arg FLASH_FLAG_OPERR: FLASH Operation error flag + * @arg FLASH_FLAG_PROGERR: FLASH Programming error flag + * @arg FLASH_FLAG_WRPERR: FLASH Write protection error flag + * @arg FLASH_FLAG_PGAERR: FLASH Programming alignment error flag + * @arg FLASH_FLAG_SIZERR: FLASH Size error flag + * @arg FLASH_FLAG_PGSERR: FLASH Programming sequence error flag + * @arg FLASH_FLAG_MISERR: FLASH Fast programming data miss error flag + * @arg FLASH_FLAG_FASTERR: FLASH Fast programming error flag + * @arg FLASH_FLAG_RDERR: FLASH PCROP read error flag + * @arg FLASH_FLAG_OPTVERR: FLASH Option validity error flag + * @arg FLASH_FLAG_ECCC: FLASH one ECC error has been detected and corrected + * @arg FLASH_FLAG_ECCD: FLASH two ECC errors have been detected + * @arg FLASH_FLAG_ALL_ERRORS: FLASH All errors flags + * @retval None + */ +#define __HAL_FLASH_CLEAR_FLAG(__FLAG__) do { if(((__FLAG__) & FLASH_FLAG_ECCR_ERRORS) != 0U) { SET_BIT(FLASH->ECCR, ((__FLAG__) & FLASH_FLAG_ECCR_ERRORS)); }\ + if(((__FLAG__) & ~(FLASH_FLAG_ECCR_ERRORS)) != 0U) { WRITE_REG(FLASH->SR, ((__FLAG__) & ~(FLASH_FLAG_ECCR_ERRORS))); }\ + } while(0) +/** + * @} + */ + +/* Include FLASH HAL Extended module */ +#include "stm32l4xx_hal_flash_ex.h" +#include "stm32l4xx_hal_flash_ramfunc.h" + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup FLASH_Exported_Functions + * @{ + */ + +/* Program operation functions ***********************************************/ +/** @addtogroup FLASH_Exported_Functions_Group1 + * @{ + */ +HAL_StatusTypeDef HAL_FLASH_Program(uint32_t TypeProgram, uint32_t Address, uint64_t Data); +HAL_StatusTypeDef HAL_FLASH_Program_IT(uint32_t TypeProgram, uint32_t Address, uint64_t Data); +/* FLASH IRQ handler method */ +void HAL_FLASH_IRQHandler(void); +/* Callbacks in non blocking modes */ +void HAL_FLASH_EndOfOperationCallback(uint32_t ReturnValue); +void HAL_FLASH_OperationErrorCallback(uint32_t ReturnValue); +/** + * @} + */ + +/* Peripheral Control functions **********************************************/ +/** @addtogroup FLASH_Exported_Functions_Group2 + * @{ + */ +HAL_StatusTypeDef HAL_FLASH_Unlock(void); +HAL_StatusTypeDef HAL_FLASH_Lock(void); +/* Option bytes control */ +HAL_StatusTypeDef HAL_FLASH_OB_Unlock(void); +HAL_StatusTypeDef HAL_FLASH_OB_Lock(void); +HAL_StatusTypeDef HAL_FLASH_OB_Launch(void); +/** + * @} + */ + +/* Peripheral State functions ************************************************/ +/** @addtogroup FLASH_Exported_Functions_Group3 + * @{ + */ +uint32_t HAL_FLASH_GetError(void); +/** + * @} + */ + +/** + * @} + */ + +/* Private variables ---------------------------------------------------------*/ +/** @addtogroup FLASH_Private_Variables FLASH Private Variables + * @{ + */ +extern FLASH_ProcessTypeDef pFlash; +/** + * @} + */ + +/* Private function ----------------------------------------------------------*/ +/** @addtogroup FLASH_Private_Functions FLASH Private Functions + * @{ + */ +HAL_StatusTypeDef FLASH_WaitForLastOperation(uint32_t Timeout); +/** + * @} + */ + +/* Private constants --------------------------------------------------------*/ +/** @defgroup FLASH_Private_Constants FLASH Private Constants + * @{ + */ +#if defined (STM32L471xx) || defined (STM32L475xx) || defined (STM32L476xx) || defined (STM32L485xx) || defined (STM32L486xx) || \ + defined (STM32L496xx) || defined (STM32L4A6xx) || defined (STM32L4P5xx) || defined (STM32L4Q5xx) || defined (STM32L4R5xx) || \ + defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined (STM32L4S9xx) +#define FLASH_BANK_SIZE (FLASH_SIZE >> 1U) +#else +#define FLASH_BANK_SIZE (FLASH_SIZE) +#endif + +#if defined (STM32L4P5xx) || defined (STM32L4Q5xx) || defined (STM32L4R5xx) || defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined (STM32L4S9xx) +#define FLASH_PAGE_SIZE ((uint32_t)0x1000) +#define FLASH_PAGE_SIZE_128_BITS ((uint32_t)0x2000) +#else +#define FLASH_PAGE_SIZE ((uint32_t)0x800) +#endif + +#define FLASH_TIMEOUT_VALUE ((uint32_t)50000)/* 50 s */ +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup FLASH_Private_Macros FLASH Private Macros + * @{ + */ + +#define IS_FLASH_TYPEERASE(VALUE) (((VALUE) == FLASH_TYPEERASE_PAGES) || \ + ((VALUE) == FLASH_TYPEERASE_MASSERASE)) + +#if defined (STM32L471xx) || defined (STM32L475xx) || defined (STM32L476xx) || defined (STM32L485xx) || defined (STM32L486xx) || \ + defined (STM32L496xx) || defined (STM32L4A6xx) || defined (STM32L4P5xx) || defined (STM32L4Q5xx) || defined (STM32L4R5xx) || \ + defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined (STM32L4S9xx) +#define IS_FLASH_BANK(BANK) (((BANK) == FLASH_BANK_1) || \ + ((BANK) == FLASH_BANK_2) || \ + ((BANK) == FLASH_BANK_BOTH)) + +#define IS_FLASH_BANK_EXCLUSIVE(BANK) (((BANK) == FLASH_BANK_1) || \ + ((BANK) == FLASH_BANK_2)) +#else +#define IS_FLASH_BANK(BANK) ((BANK) == FLASH_BANK_1) + +#define IS_FLASH_BANK_EXCLUSIVE(BANK) ((BANK) == FLASH_BANK_1) +#endif + +#define IS_FLASH_TYPEPROGRAM(VALUE) (((VALUE) == FLASH_TYPEPROGRAM_DOUBLEWORD) || \ + ((VALUE) == FLASH_TYPEPROGRAM_FAST) || \ + ((VALUE) == FLASH_TYPEPROGRAM_FAST_AND_LAST)) + +#if defined (STM32L4R5xx) || defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined (STM32L4S9xx) +#define IS_FLASH_MAIN_MEM_ADDRESS(ADDRESS) (((ADDRESS) >= (FLASH_BASE)) && ((ADDRESS) <= (FLASH_BASE+0x1FFFFFU))) +#else +#define IS_FLASH_MAIN_MEM_ADDRESS(ADDRESS) (((ADDRESS) >= (FLASH_BASE)) && ((((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) & (0x0FFFU)) == 0x400U) ? \ + ((ADDRESS) <= (FLASH_BASE+0xFFFFFU)) : ((((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) & (0x0FFFU)) == 0x200U) ? \ + ((ADDRESS) <= (FLASH_BASE+0x7FFFFU)) : ((((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) & (0x0FFFU)) == 0x100U) ? \ + ((ADDRESS) <= (FLASH_BASE+0x3FFFFU)) : ((((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) & (0x0FFFU)) == 0x80U) ? \ + ((ADDRESS) <= (FLASH_BASE+0x1FFFFU)) : ((ADDRESS) <= (FLASH_BASE+0xFFFFFU))))))) +#endif + +#define IS_FLASH_OTP_ADDRESS(ADDRESS) (((ADDRESS) >= 0x1FFF7000U) && ((ADDRESS) <= 0x1FFF73FFU)) + +#define IS_FLASH_PROGRAM_ADDRESS(ADDRESS) ((IS_FLASH_MAIN_MEM_ADDRESS(ADDRESS)) || (IS_FLASH_OTP_ADDRESS(ADDRESS))) + +#if defined (STM32L4R5xx) || defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined (STM32L4S9xx) +#define IS_FLASH_PAGE(PAGE) ((PAGE) < 256U) +#elif defined(STM32L471xx) || defined(STM32L475xx) || defined(STM32L476xx) || defined(STM32L485xx) || defined(STM32L486xx) || defined(STM32L496xx) || defined(STM32L4A6xx) || defined (STM32L4P5xx) || defined (STM32L4Q5xx) +#define IS_FLASH_PAGE(PAGE) (((((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) & (0x0FFFU)) == 0x400U) ? ((PAGE) < 256U) : \ + ((((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) & (0x0FFFU)) == 0x200U) ? ((PAGE) < 128U) : \ + ((((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) & (0x0FFFU)) == 0x100U) ? ((PAGE) < 64U) : \ + ((PAGE) < 256U))))) +#elif defined (STM32L451xx) || defined (STM32L452xx) || defined (STM32L462xx) +#define IS_FLASH_PAGE(PAGE) (((((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) & (0x0FFFU)) == 0x200U) ? ((PAGE) < 256U) : \ + ((((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) & (0x0FFFU)) == 0x100U) ? ((PAGE) < 128U) : \ + ((PAGE) < 256U)))) +#else +#define IS_FLASH_PAGE(PAGE) (((((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) & (0x0FFFU)) == 0x100U) ? ((PAGE) < 128U) : \ + ((((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) & (0x0FFFU)) == 0x80U) ? ((PAGE) < 64U) : \ + ((PAGE) < 128U)))) +#endif + +#define IS_OPTIONBYTE(VALUE) (((VALUE) <= (OPTIONBYTE_WRP | OPTIONBYTE_RDP | OPTIONBYTE_USER | OPTIONBYTE_PCROP))) + +#if defined (STM32L471xx) || defined (STM32L475xx) || defined (STM32L476xx) || defined (STM32L485xx) || defined (STM32L486xx) || \ + defined (STM32L496xx) || defined (STM32L4A6xx) || defined (STM32L4P5xx) || defined (STM32L4Q5xx) || defined (STM32L4R5xx) || \ + defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined (STM32L4S9xx) +#define IS_OB_WRPAREA(VALUE) (((VALUE) == OB_WRPAREA_BANK1_AREAA) || ((VALUE) == OB_WRPAREA_BANK1_AREAB) || \ + ((VALUE) == OB_WRPAREA_BANK2_AREAA) || ((VALUE) == OB_WRPAREA_BANK2_AREAB)) +#else +#define IS_OB_WRPAREA(VALUE) (((VALUE) == OB_WRPAREA_BANK1_AREAA) || ((VALUE) == OB_WRPAREA_BANK1_AREAB)) +#endif + +#define IS_OB_RDP_LEVEL(LEVEL) (((LEVEL) == OB_RDP_LEVEL_0) ||\ + ((LEVEL) == OB_RDP_LEVEL_1)/* ||\ + ((LEVEL) == OB_RDP_LEVEL_2)*/) + +#if defined (STM32L4P5xx) || defined (STM32L4Q5xx) || defined (STM32L4R5xx) || defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined (STM32L4S9xx) +#define IS_OB_USER_TYPE(TYPE) (((TYPE) <= (uint32_t)0xFFFFU) && ((TYPE) != 0U)) +#elif defined(STM32L471xx) || defined(STM32L475xx) || defined(STM32L476xx) || defined(STM32L485xx) || defined(STM32L486xx) || defined(STM32L496xx) || defined(STM32L4A6xx) +#define IS_OB_USER_TYPE(TYPE) (((TYPE) <= (uint32_t)0x1FFFU) && ((TYPE) != 0U)) +#else +#define IS_OB_USER_TYPE(TYPE) (((TYPE) <= (uint32_t)0x7E7FU) && ((TYPE) != 0U) && (((TYPE)&0x0180U) == 0U)) +#endif + +#define IS_OB_USER_BOR_LEVEL(LEVEL) (((LEVEL) == OB_BOR_LEVEL_0) || ((LEVEL) == OB_BOR_LEVEL_1) || \ + ((LEVEL) == OB_BOR_LEVEL_2) || ((LEVEL) == OB_BOR_LEVEL_3) || \ + ((LEVEL) == OB_BOR_LEVEL_4)) + +#define IS_OB_USER_STOP(VALUE) (((VALUE) == OB_STOP_RST) || ((VALUE) == OB_STOP_NORST)) + +#define IS_OB_USER_STANDBY(VALUE) (((VALUE) == OB_STANDBY_RST) || ((VALUE) == OB_STANDBY_NORST)) + +#define IS_OB_USER_SHUTDOWN(VALUE) (((VALUE) == OB_SHUTDOWN_RST) || ((VALUE) == OB_SHUTDOWN_NORST)) + +#define IS_OB_USER_IWDG(VALUE) (((VALUE) == OB_IWDG_HW) || ((VALUE) == OB_IWDG_SW)) + +#define IS_OB_USER_IWDG_STOP(VALUE) (((VALUE) == OB_IWDG_STOP_FREEZE) || ((VALUE) == OB_IWDG_STOP_RUN)) + +#define IS_OB_USER_IWDG_STDBY(VALUE) (((VALUE) == OB_IWDG_STDBY_FREEZE) || ((VALUE) == OB_IWDG_STDBY_RUN)) + +#define IS_OB_USER_WWDG(VALUE) (((VALUE) == OB_WWDG_HW) || ((VALUE) == OB_WWDG_SW)) + +#if defined (STM32L471xx) || defined (STM32L475xx) || defined (STM32L476xx) || defined (STM32L485xx) || defined (STM32L486xx) || \ + defined (STM32L496xx) || defined (STM32L4A6xx) || defined (STM32L4P5xx) || defined (STM32L4Q5xx) || defined (STM32L4R5xx) || \ + defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined (STM32L4S9xx) +#define IS_OB_USER_BFB2(VALUE) (((VALUE) == OB_BFB2_DISABLE) || ((VALUE) == OB_BFB2_ENABLE)) + +#define IS_OB_USER_DUALBANK(VALUE) (((VALUE) == OB_DUALBANK_SINGLE) || ((VALUE) == OB_DUALBANK_DUAL)) +#endif + +#if defined (STM32L4R5xx) || defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined (STM32L4S9xx) +#define IS_OB_USER_DBANK(VALUE) (((VALUE) == OB_DBANK_128_BITS) || ((VALUE) == OB_DBANK_64_BITS)) +#endif + +#define IS_OB_USER_BOOT1(VALUE) (((VALUE) == OB_BOOT1_SRAM) || ((VALUE) == OB_BOOT1_SYSTEM)) + +#define IS_OB_USER_SRAM2_PARITY(VALUE) (((VALUE) == OB_SRAM2_PARITY_ENABLE) || ((VALUE) == OB_SRAM2_PARITY_DISABLE)) + +#define IS_OB_USER_SRAM2_RST(VALUE) (((VALUE) == OB_SRAM2_RST_ERASE) || ((VALUE) == OB_SRAM2_RST_NOT_ERASE)) + +#if defined (STM32L412xx) || defined (STM32L422xx) || defined (STM32L431xx) || defined (STM32L432xx) || defined (STM32L433xx) || \ + defined (STM32L442xx) || defined (STM32L443xx) || defined (STM32L451xx) || defined (STM32L452xx) || defined (STM32L462xx) || \ + defined (STM32L496xx) || defined (STM32L4A6xx) || defined (STM32L4P5xx) || defined (STM32L4Q5xx) || defined (STM32L4R5xx) || \ + defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined (STM32L4S9xx) +#define IS_OB_USER_SWBOOT0(VALUE) (((VALUE) == OB_BOOT0_FROM_OB) || ((VALUE) == OB_BOOT0_FROM_PIN)) + +#define IS_OB_USER_BOOT0(VALUE) (((VALUE) == OB_BOOT0_RESET) || ((VALUE) == OB_BOOT0_SET)) +#endif + +#define IS_OB_PCROP_RDP(VALUE) (((VALUE) == OB_PCROP_RDP_NOT_ERASE) || ((VALUE) == OB_PCROP_RDP_ERASE)) + +#if defined (STM32L4P5xx) || defined (STM32L4Q5xx) || defined (STM32L4R5xx) || defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined (STM32L4S9xx) +#define IS_FLASH_LATENCY(LATENCY) (((LATENCY) == FLASH_LATENCY_0) || ((LATENCY) == FLASH_LATENCY_1) || \ + ((LATENCY) == FLASH_LATENCY_2) || ((LATENCY) == FLASH_LATENCY_3) || \ + ((LATENCY) == FLASH_LATENCY_4) || ((LATENCY) == FLASH_LATENCY_5) || \ + ((LATENCY) == FLASH_LATENCY_6) || ((LATENCY) == FLASH_LATENCY_7) || \ + ((LATENCY) == FLASH_LATENCY_8) || ((LATENCY) == FLASH_LATENCY_9) || \ + ((LATENCY) == FLASH_LATENCY_10) || ((LATENCY) == FLASH_LATENCY_11) || \ + ((LATENCY) == FLASH_LATENCY_12) || ((LATENCY) == FLASH_LATENCY_13) || \ + ((LATENCY) == FLASH_LATENCY_14) || ((LATENCY) == FLASH_LATENCY_15)) +#else +#define IS_FLASH_LATENCY(LATENCY) (((LATENCY) == FLASH_LATENCY_0) || \ + ((LATENCY) == FLASH_LATENCY_1) || \ + ((LATENCY) == FLASH_LATENCY_2) || \ + ((LATENCY) == FLASH_LATENCY_3) || \ + ((LATENCY) == FLASH_LATENCY_4)) +#endif +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32L4xx_HAL_FLASH_H */ + diff --git a/CablePositioning_IAP_V1.0/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash_ex.h b/CablePositioning_IAP_V1.0/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash_ex.h index 06fd317..36ec888 100644 --- a/CablePositioning_IAP_V1.0/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash_ex.h +++ b/CablePositioning_IAP_V1.0/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash_ex.h @@ -1,125 +1,125 @@ -/** - ****************************************************************************** - * @file stm32l4xx_hal_flash_ex.h - * @author MCD Application Team - * @brief Header file of FLASH HAL Extended module. - ****************************************************************************** - * @attention - * - * Copyright (c) 2017 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file in - * the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef STM32L4xx_HAL_FLASH_EX_H -#define STM32L4xx_HAL_FLASH_EX_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32l4xx_hal_def.h" - -/** @addtogroup STM32L4xx_HAL_Driver - * @{ - */ - -/** @addtogroup FLASHEx - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ - -/* Exported constants --------------------------------------------------------*/ -#if defined (FLASH_CFGR_LVEN) -/** @addtogroup FLASHEx_Exported_Constants - * @{ - */ -/** @defgroup FLASHEx_LVE_PIN_CFG FLASHEx LVE pin configuration - * @{ - */ -#define FLASH_LVE_PIN_CTRL 0x00000000U /*!< LVE FLASH pin controlled by power controller */ -#define FLASH_LVE_PIN_FORCED FLASH_CFGR_LVEN /*!< LVE FLASH pin enforced to low (external SMPS used) */ -/** - * @} - */ - -/** - * @} - */ -#endif /* FLASH_CFGR_LVEN */ - -/* Exported macro ------------------------------------------------------------*/ - -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup FLASHEx_Exported_Functions - * @{ - */ - -/* Extended Program operation functions *************************************/ -/** @addtogroup FLASHEx_Exported_Functions_Group1 - * @{ - */ -HAL_StatusTypeDef HAL_FLASHEx_Erase(FLASH_EraseInitTypeDef *pEraseInit, uint32_t *PageError); -HAL_StatusTypeDef HAL_FLASHEx_Erase_IT(FLASH_EraseInitTypeDef *pEraseInit); -HAL_StatusTypeDef HAL_FLASHEx_OBProgram(FLASH_OBProgramInitTypeDef *pOBInit); -void HAL_FLASHEx_OBGetConfig(FLASH_OBProgramInitTypeDef *pOBInit); -/** - * @} - */ - -#if defined (FLASH_CFGR_LVEN) -/** @addtogroup FLASHEx_Exported_Functions_Group2 - * @{ - */ -HAL_StatusTypeDef HAL_FLASHEx_ConfigLVEPin(uint32_t ConfigLVE); -/** - * @} - */ -#endif /* FLASH_CFGR_LVEN */ - -/** - * @} - */ - -/* Private function ----------------------------------------------------------*/ -/** @addtogroup FLASHEx_Private_Functions FLASHEx Private Functions - * @{ - */ -void FLASH_PageErase(uint32_t Page, uint32_t Banks); -void FLASH_FlushCaches(void); -/** - * @} - */ - -/* Private macros ------------------------------------------------------------*/ -/** - @cond 0 - */ -#if defined (FLASH_CFGR_LVEN) -#define IS_FLASH_LVE_PIN(CFG) (((CFG) == FLASH_LVE_PIN_CTRL) || ((CFG) == FLASH_LVE_PIN_FORCED)) -#endif /* FLASH_CFGR_LVEN */ -/** - @endcond - */ - -/** - * @} - */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /* STM32L4xx_HAL_FLASH_EX_H */ - +/** + ****************************************************************************** + * @file stm32l4xx_hal_flash_ex.h + * @author MCD Application Team + * @brief Header file of FLASH HAL Extended module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file in + * the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32L4xx_HAL_FLASH_EX_H +#define STM32L4xx_HAL_FLASH_EX_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l4xx_hal_def.h" + +/** @addtogroup STM32L4xx_HAL_Driver + * @{ + */ + +/** @addtogroup FLASHEx + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ + +/* Exported constants --------------------------------------------------------*/ +#if defined (FLASH_CFGR_LVEN) +/** @addtogroup FLASHEx_Exported_Constants + * @{ + */ +/** @defgroup FLASHEx_LVE_PIN_CFG FLASHEx LVE pin configuration + * @{ + */ +#define FLASH_LVE_PIN_CTRL 0x00000000U /*!< LVE FLASH pin controlled by power controller */ +#define FLASH_LVE_PIN_FORCED FLASH_CFGR_LVEN /*!< LVE FLASH pin enforced to low (external SMPS used) */ +/** + * @} + */ + +/** + * @} + */ +#endif /* FLASH_CFGR_LVEN */ + +/* Exported macro ------------------------------------------------------------*/ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup FLASHEx_Exported_Functions + * @{ + */ + +/* Extended Program operation functions *************************************/ +/** @addtogroup FLASHEx_Exported_Functions_Group1 + * @{ + */ +HAL_StatusTypeDef HAL_FLASHEx_Erase(FLASH_EraseInitTypeDef *pEraseInit, uint32_t *PageError); +HAL_StatusTypeDef HAL_FLASHEx_Erase_IT(FLASH_EraseInitTypeDef *pEraseInit); +HAL_StatusTypeDef HAL_FLASHEx_OBProgram(FLASH_OBProgramInitTypeDef *pOBInit); +void HAL_FLASHEx_OBGetConfig(FLASH_OBProgramInitTypeDef *pOBInit); +/** + * @} + */ + +#if defined (FLASH_CFGR_LVEN) +/** @addtogroup FLASHEx_Exported_Functions_Group2 + * @{ + */ +HAL_StatusTypeDef HAL_FLASHEx_ConfigLVEPin(uint32_t ConfigLVE); +/** + * @} + */ +#endif /* FLASH_CFGR_LVEN */ + +/** + * @} + */ + +/* Private function ----------------------------------------------------------*/ +/** @addtogroup FLASHEx_Private_Functions FLASHEx Private Functions + * @{ + */ +void FLASH_PageErase(uint32_t Page, uint32_t Banks); +void FLASH_FlushCaches(void); +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** + @cond 0 + */ +#if defined (FLASH_CFGR_LVEN) +#define IS_FLASH_LVE_PIN(CFG) (((CFG) == FLASH_LVE_PIN_CTRL) || ((CFG) == FLASH_LVE_PIN_FORCED)) +#endif /* FLASH_CFGR_LVEN */ +/** + @endcond + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32L4xx_HAL_FLASH_EX_H */ + diff --git a/CablePositioning_IAP_V1.0/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash_ramfunc.h b/CablePositioning_IAP_V1.0/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash_ramfunc.h index 1b40ab4..b5852fc 100644 --- a/CablePositioning_IAP_V1.0/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash_ramfunc.h +++ b/CablePositioning_IAP_V1.0/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash_ramfunc.h @@ -1,74 +1,74 @@ -/** - ****************************************************************************** - * @file stm32l4xx_hal_flash_ramfunc.h - * @author MCD Application Team - * @brief Header file of FLASH RAMFUNC driver. - ****************************************************************************** - * @attention - * - * Copyright (c) 2017 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file in - * the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef STM32L4xx_FLASH_RAMFUNC_H -#define STM32L4xx_FLASH_RAMFUNC_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32l4xx_hal_def.h" - -/** @addtogroup STM32L4xx_HAL_Driver - * @{ - */ - -/** @addtogroup FLASH_RAMFUNC - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ -/* Exported macro ------------------------------------------------------------*/ -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup FLASH_RAMFUNC_Exported_Functions - * @{ - */ - -/** @addtogroup FLASH_RAMFUNC_Exported_Functions_Group1 - * @{ - */ -/* Peripheral Control functions ************************************************/ -__RAM_FUNC HAL_StatusTypeDef HAL_FLASHEx_EnableRunPowerDown(void); -__RAM_FUNC HAL_StatusTypeDef HAL_FLASHEx_DisableRunPowerDown(void); -#if defined (STM32L4P5xx) || defined (STM32L4Q5xx) || defined (STM32L4R5xx) || defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined (STM32L4S9xx) -__RAM_FUNC HAL_StatusTypeDef HAL_FLASHEx_OB_DBankConfig(uint32_t DBankConfig); -#endif -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /* STM32L4xx_FLASH_RAMFUNC_H */ - +/** + ****************************************************************************** + * @file stm32l4xx_hal_flash_ramfunc.h + * @author MCD Application Team + * @brief Header file of FLASH RAMFUNC driver. + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file in + * the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32L4xx_FLASH_RAMFUNC_H +#define STM32L4xx_FLASH_RAMFUNC_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l4xx_hal_def.h" + +/** @addtogroup STM32L4xx_HAL_Driver + * @{ + */ + +/** @addtogroup FLASH_RAMFUNC + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/* Exported macro ------------------------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup FLASH_RAMFUNC_Exported_Functions + * @{ + */ + +/** @addtogroup FLASH_RAMFUNC_Exported_Functions_Group1 + * @{ + */ +/* Peripheral Control functions ************************************************/ +__RAM_FUNC HAL_StatusTypeDef HAL_FLASHEx_EnableRunPowerDown(void); +__RAM_FUNC HAL_StatusTypeDef HAL_FLASHEx_DisableRunPowerDown(void); +#if defined (STM32L4P5xx) || defined (STM32L4Q5xx) || defined (STM32L4R5xx) || defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined (STM32L4S9xx) +__RAM_FUNC HAL_StatusTypeDef HAL_FLASHEx_OB_DBankConfig(uint32_t DBankConfig); +#endif +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32L4xx_FLASH_RAMFUNC_H */ + diff --git a/CablePositioning_IAP_V1.0/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_gpio.h b/CablePositioning_IAP_V1.0/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_gpio.h index 9713afb..aaa7b6d 100644 --- a/CablePositioning_IAP_V1.0/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_gpio.h +++ b/CablePositioning_IAP_V1.0/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_gpio.h @@ -1,323 +1,323 @@ -/** - ****************************************************************************** - * @file stm32l4xx_hal_gpio.h - * @author MCD Application Team - * @brief Header file of GPIO HAL module. - ****************************************************************************** - * @attention - * - * Copyright (c) 2017 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef STM32L4xx_HAL_GPIO_H -#define STM32L4xx_HAL_GPIO_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32l4xx_hal_def.h" - -/** @addtogroup STM32L4xx_HAL_Driver - * @{ - */ - -/** @addtogroup GPIO - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ - -/** @defgroup GPIO_Exported_Types GPIO Exported Types - * @{ - */ -/** - * @brief GPIO Init structure definition - */ -typedef struct -{ - uint32_t Pin; /*!< Specifies the GPIO pins to be configured. - This parameter can be any value of @ref GPIO_pins */ - - uint32_t Mode; /*!< Specifies the operating mode for the selected pins. - This parameter can be a value of @ref GPIO_mode */ - - uint32_t Pull; /*!< Specifies the Pull-up or Pull-Down activation for the selected pins. - This parameter can be a value of @ref GPIO_pull */ - - uint32_t Speed; /*!< Specifies the speed for the selected pins. - This parameter can be a value of @ref GPIO_speed */ - - uint32_t Alternate; /*!< Peripheral to be connected to the selected pins - This parameter can be a value of @ref GPIOEx_Alternate_function_selection */ -} GPIO_InitTypeDef; - -/** - * @brief GPIO Bit SET and Bit RESET enumeration - */ -typedef enum -{ - GPIO_PIN_RESET = 0U, - GPIO_PIN_SET -} GPIO_PinState; -/** - * @} - */ - -/* Exported constants --------------------------------------------------------*/ -/** @defgroup GPIO_Exported_Constants GPIO Exported Constants - * @{ - */ -/** @defgroup GPIO_pins GPIO pins - * @{ - */ -#define GPIO_PIN_0 ((uint16_t)0x0001) /* Pin 0 selected */ -#define GPIO_PIN_1 ((uint16_t)0x0002) /* Pin 1 selected */ -#define GPIO_PIN_2 ((uint16_t)0x0004) /* Pin 2 selected */ -#define GPIO_PIN_3 ((uint16_t)0x0008) /* Pin 3 selected */ -#define GPIO_PIN_4 ((uint16_t)0x0010) /* Pin 4 selected */ -#define GPIO_PIN_5 ((uint16_t)0x0020) /* Pin 5 selected */ -#define GPIO_PIN_6 ((uint16_t)0x0040) /* Pin 6 selected */ -#define GPIO_PIN_7 ((uint16_t)0x0080) /* Pin 7 selected */ -#define GPIO_PIN_8 ((uint16_t)0x0100) /* Pin 8 selected */ -#define GPIO_PIN_9 ((uint16_t)0x0200) /* Pin 9 selected */ -#define GPIO_PIN_10 ((uint16_t)0x0400) /* Pin 10 selected */ -#define GPIO_PIN_11 ((uint16_t)0x0800) /* Pin 11 selected */ -#define GPIO_PIN_12 ((uint16_t)0x1000) /* Pin 12 selected */ -#define GPIO_PIN_13 ((uint16_t)0x2000) /* Pin 13 selected */ -#define GPIO_PIN_14 ((uint16_t)0x4000) /* Pin 14 selected */ -#define GPIO_PIN_15 ((uint16_t)0x8000) /* Pin 15 selected */ -#define GPIO_PIN_All ((uint16_t)0xFFFF) /* All pins selected */ - -#define GPIO_PIN_MASK ((uint32_t)0x0000FFFF) /* PIN mask for assert test */ -/** - * @} - */ - -/** @defgroup GPIO_mode GPIO mode - * @brief GPIO Configuration Mode - * Elements values convention: 0x00WX00YZ - * - W : EXTI trigger detection on 3 bits - * - X : EXTI mode (IT or Event) on 2 bits - * - Y : Output type (Push Pull or Open Drain) on 1 bit - * - Z : GPIO mode (Input, Output, Alternate or Analog) on 2 bits - * @{ - */ -#define GPIO_MODE_INPUT MODE_INPUT /*!< Input Floating Mode */ -#define GPIO_MODE_OUTPUT_PP (MODE_OUTPUT | OUTPUT_PP) /*!< Output Push Pull Mode */ -#define GPIO_MODE_OUTPUT_OD (MODE_OUTPUT | OUTPUT_OD) /*!< Output Open Drain Mode */ -#define GPIO_MODE_AF_PP (MODE_AF | OUTPUT_PP) /*!< Alternate Function Push Pull Mode */ -#define GPIO_MODE_AF_OD (MODE_AF | OUTPUT_OD) /*!< Alternate Function Open Drain Mode */ -#define GPIO_MODE_ANALOG MODE_ANALOG /*!< Analog Mode */ -#define GPIO_MODE_ANALOG_ADC_CONTROL (MODE_ANALOG | 0x8uL) /*!< Analog Mode for ADC conversion (0x0000000Bu)*/ -#define GPIO_MODE_IT_RISING (MODE_INPUT | EXTI_IT | TRIGGER_RISING) /*!< External Interrupt Mode with Rising edge trigger detection */ -#define GPIO_MODE_IT_FALLING (MODE_INPUT | EXTI_IT | TRIGGER_FALLING) /*!< External Interrupt Mode with Falling edge trigger detection */ -#define GPIO_MODE_IT_RISING_FALLING (MODE_INPUT | EXTI_IT | TRIGGER_RISING | TRIGGER_FALLING) /*!< External Interrupt Mode with Rising/Falling edge trigger detection */ -#define GPIO_MODE_EVT_RISING (MODE_INPUT | EXTI_EVT | TRIGGER_RISING) /*!< External Event Mode with Rising edge trigger detection */ -#define GPIO_MODE_EVT_FALLING (MODE_INPUT | EXTI_EVT | TRIGGER_FALLING) /*!< External Event Mode with Falling edge trigger detection */ -#define GPIO_MODE_EVT_RISING_FALLING (MODE_INPUT | EXTI_EVT | TRIGGER_RISING | TRIGGER_FALLING) /*!< External Event Mode with Rising/Falling edge trigger detection */ -/** - * @} - */ - -/** @defgroup GPIO_speed GPIO speed - * @brief GPIO Output Maximum frequency - * @{ - */ -#define GPIO_SPEED_FREQ_LOW 0x00000000u /*!< Low speed */ -#define GPIO_SPEED_FREQ_MEDIUM 0x00000001u /*!< Medium speed */ -#define GPIO_SPEED_FREQ_HIGH 0x00000002u /*!< High speed */ -#define GPIO_SPEED_FREQ_VERY_HIGH 0x00000003u /*!< Very high speed */ -/** - * @} - */ - -/** @defgroup GPIO_pull GPIO pull - * @brief GPIO Pull-Up or Pull-Down Activation - * @{ - */ -#define GPIO_NOPULL 0x00000000u /*!< No Pull-up or Pull-down activation */ -#define GPIO_PULLUP 0x00000001u /*!< Pull-up activation */ -#define GPIO_PULLDOWN 0x00000002u /*!< Pull-down activation */ -/** - * @} - */ - -/** - * @} - */ - -/* Exported macro ------------------------------------------------------------*/ -/** @defgroup GPIO_Exported_Macros GPIO Exported Macros - * @{ - */ - -/** - * @brief Check whether the specified EXTI line flag is set or not. - * @param __EXTI_LINE__ specifies the EXTI line flag to check. - * This parameter can be GPIO_PIN_x where x can be(0..15) - * @retval The new state of __EXTI_LINE__ (SET or RESET). - */ -#define __HAL_GPIO_EXTI_GET_FLAG(__EXTI_LINE__) (EXTI->PR1 & (__EXTI_LINE__)) - -/** - * @brief Clear the EXTI's line pending flags. - * @param __EXTI_LINE__ specifies the EXTI lines flags to clear. - * This parameter can be any combination of GPIO_PIN_x where x can be (0..15) - * @retval None - */ -#define __HAL_GPIO_EXTI_CLEAR_FLAG(__EXTI_LINE__) (EXTI->PR1 = (__EXTI_LINE__)) - -/** - * @brief Check whether the specified EXTI line is asserted or not. - * @param __EXTI_LINE__ specifies the EXTI line to check. - * This parameter can be GPIO_PIN_x where x can be(0..15) - * @retval The new state of __EXTI_LINE__ (SET or RESET). - */ -#define __HAL_GPIO_EXTI_GET_IT(__EXTI_LINE__) (EXTI->PR1 & (__EXTI_LINE__)) - -/** - * @brief Clear the EXTI's line pending bits. - * @param __EXTI_LINE__ specifies the EXTI lines to clear. - * This parameter can be any combination of GPIO_PIN_x where x can be (0..15) - * @retval None - */ -#define __HAL_GPIO_EXTI_CLEAR_IT(__EXTI_LINE__) (EXTI->PR1 = (__EXTI_LINE__)) - -/** - * @brief Generate a Software interrupt on selected EXTI line. - * @param __EXTI_LINE__ specifies the EXTI line to check. - * This parameter can be GPIO_PIN_x where x can be(0..15) - * @retval None - */ -#define __HAL_GPIO_EXTI_GENERATE_SWIT(__EXTI_LINE__) (EXTI->SWIER1 |= (__EXTI_LINE__)) - -/** - * @} - */ - -/* Private macros ------------------------------------------------------------*/ -/** @defgroup GPIO_Private_Constants GPIO Private Constants - * @{ - */ -#define GPIO_MODE_Pos 0u -#define GPIO_MODE (0x3uL << GPIO_MODE_Pos) -#define MODE_INPUT (0x0uL << GPIO_MODE_Pos) -#define MODE_OUTPUT (0x1uL << GPIO_MODE_Pos) -#define MODE_AF (0x2uL << GPIO_MODE_Pos) -#define MODE_ANALOG (0x3uL << GPIO_MODE_Pos) -#define OUTPUT_TYPE_Pos 4u -#define OUTPUT_TYPE (0x1uL << OUTPUT_TYPE_Pos) -#define OUTPUT_PP (0x0uL << OUTPUT_TYPE_Pos) -#define OUTPUT_OD (0x1uL << OUTPUT_TYPE_Pos) -#define EXTI_MODE_Pos 16u -#define EXTI_MODE (0x3uL << EXTI_MODE_Pos) -#define EXTI_IT (0x1uL << EXTI_MODE_Pos) -#define EXTI_EVT (0x2uL << EXTI_MODE_Pos) -#define TRIGGER_MODE_Pos 20u -#define TRIGGER_MODE (0x7uL << TRIGGER_MODE_Pos) -#define TRIGGER_RISING (0x1uL << TRIGGER_MODE_Pos) -#define TRIGGER_FALLING (0x2uL << TRIGGER_MODE_Pos) - -/** - * @} - */ - -/** @addtogroup GPIO_Private_Macros GPIO Private Macros - * @{ - */ -#define IS_GPIO_PIN_ACTION(ACTION) (((ACTION) == GPIO_PIN_RESET) || ((ACTION) == GPIO_PIN_SET)) - -#define IS_GPIO_PIN(__PIN__) ((((uint32_t)(__PIN__) & GPIO_PIN_MASK) != 0x00U) &&\ - (((uint32_t)(__PIN__) & ~GPIO_PIN_MASK) == 0x00U)) - -#define IS_GPIO_MODE(__MODE__) (((__MODE__) == GPIO_MODE_INPUT) ||\ - ((__MODE__) == GPIO_MODE_OUTPUT_PP) ||\ - ((__MODE__) == GPIO_MODE_OUTPUT_OD) ||\ - ((__MODE__) == GPIO_MODE_AF_PP) ||\ - ((__MODE__) == GPIO_MODE_AF_OD) ||\ - ((__MODE__) == GPIO_MODE_IT_RISING) ||\ - ((__MODE__) == GPIO_MODE_IT_FALLING) ||\ - ((__MODE__) == GPIO_MODE_IT_RISING_FALLING) ||\ - ((__MODE__) == GPIO_MODE_EVT_RISING) ||\ - ((__MODE__) == GPIO_MODE_EVT_FALLING) ||\ - ((__MODE__) == GPIO_MODE_EVT_RISING_FALLING) ||\ - ((__MODE__) == GPIO_MODE_ANALOG) ||\ - ((__MODE__) == GPIO_MODE_ANALOG_ADC_CONTROL)) - -#define IS_GPIO_SPEED(__SPEED__) (((__SPEED__) == GPIO_SPEED_FREQ_LOW) ||\ - ((__SPEED__) == GPIO_SPEED_FREQ_MEDIUM) ||\ - ((__SPEED__) == GPIO_SPEED_FREQ_HIGH) ||\ - ((__SPEED__) == GPIO_SPEED_FREQ_VERY_HIGH)) - -#define IS_GPIO_PULL(__PULL__) (((__PULL__) == GPIO_NOPULL) ||\ - ((__PULL__) == GPIO_PULLUP) || \ - ((__PULL__) == GPIO_PULLDOWN)) -/** - * @} - */ - -/* Include GPIO HAL Extended module */ -#include "stm32l4xx_hal_gpio_ex.h" - -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup GPIO_Exported_Functions GPIO Exported Functions - * @{ - */ - -/** @addtogroup GPIO_Exported_Functions_Group1 Initialization/de-initialization functions - * @brief Initialization and Configuration functions - * @{ - */ - -/* Initialization and de-initialization functions *****************************/ -void HAL_GPIO_Init(GPIO_TypeDef *GPIOx, GPIO_InitTypeDef *GPIO_Init); -void HAL_GPIO_DeInit(GPIO_TypeDef *GPIOx, uint32_t GPIO_Pin); - -/** - * @} - */ - -/** @addtogroup GPIO_Exported_Functions_Group2 IO operation functions - * @{ - */ - -/* IO operation functions *****************************************************/ -GPIO_PinState HAL_GPIO_ReadPin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin); -void HAL_GPIO_WritePin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin, GPIO_PinState PinState); -void HAL_GPIO_TogglePin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin); -HAL_StatusTypeDef HAL_GPIO_LockPin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin); -void HAL_GPIO_EXTI_IRQHandler(uint16_t GPIO_Pin); -void HAL_GPIO_EXTI_Callback(uint16_t GPIO_Pin); - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /* STM32L4xx_HAL_GPIO_H */ - +/** + ****************************************************************************** + * @file stm32l4xx_hal_gpio.h + * @author MCD Application Team + * @brief Header file of GPIO HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32L4xx_HAL_GPIO_H +#define STM32L4xx_HAL_GPIO_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l4xx_hal_def.h" + +/** @addtogroup STM32L4xx_HAL_Driver + * @{ + */ + +/** @addtogroup GPIO + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ + +/** @defgroup GPIO_Exported_Types GPIO Exported Types + * @{ + */ +/** + * @brief GPIO Init structure definition + */ +typedef struct +{ + uint32_t Pin; /*!< Specifies the GPIO pins to be configured. + This parameter can be any value of @ref GPIO_pins */ + + uint32_t Mode; /*!< Specifies the operating mode for the selected pins. + This parameter can be a value of @ref GPIO_mode */ + + uint32_t Pull; /*!< Specifies the Pull-up or Pull-Down activation for the selected pins. + This parameter can be a value of @ref GPIO_pull */ + + uint32_t Speed; /*!< Specifies the speed for the selected pins. + This parameter can be a value of @ref GPIO_speed */ + + uint32_t Alternate; /*!< Peripheral to be connected to the selected pins + This parameter can be a value of @ref GPIOEx_Alternate_function_selection */ +} GPIO_InitTypeDef; + +/** + * @brief GPIO Bit SET and Bit RESET enumeration + */ +typedef enum +{ + GPIO_PIN_RESET = 0U, + GPIO_PIN_SET +} GPIO_PinState; +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup GPIO_Exported_Constants GPIO Exported Constants + * @{ + */ +/** @defgroup GPIO_pins GPIO pins + * @{ + */ +#define GPIO_PIN_0 ((uint16_t)0x0001) /* Pin 0 selected */ +#define GPIO_PIN_1 ((uint16_t)0x0002) /* Pin 1 selected */ +#define GPIO_PIN_2 ((uint16_t)0x0004) /* Pin 2 selected */ +#define GPIO_PIN_3 ((uint16_t)0x0008) /* Pin 3 selected */ +#define GPIO_PIN_4 ((uint16_t)0x0010) /* Pin 4 selected */ +#define GPIO_PIN_5 ((uint16_t)0x0020) /* Pin 5 selected */ +#define GPIO_PIN_6 ((uint16_t)0x0040) /* Pin 6 selected */ +#define GPIO_PIN_7 ((uint16_t)0x0080) /* Pin 7 selected */ +#define GPIO_PIN_8 ((uint16_t)0x0100) /* Pin 8 selected */ +#define GPIO_PIN_9 ((uint16_t)0x0200) /* Pin 9 selected */ +#define GPIO_PIN_10 ((uint16_t)0x0400) /* Pin 10 selected */ +#define GPIO_PIN_11 ((uint16_t)0x0800) /* Pin 11 selected */ +#define GPIO_PIN_12 ((uint16_t)0x1000) /* Pin 12 selected */ +#define GPIO_PIN_13 ((uint16_t)0x2000) /* Pin 13 selected */ +#define GPIO_PIN_14 ((uint16_t)0x4000) /* Pin 14 selected */ +#define GPIO_PIN_15 ((uint16_t)0x8000) /* Pin 15 selected */ +#define GPIO_PIN_All ((uint16_t)0xFFFF) /* All pins selected */ + +#define GPIO_PIN_MASK ((uint32_t)0x0000FFFF) /* PIN mask for assert test */ +/** + * @} + */ + +/** @defgroup GPIO_mode GPIO mode + * @brief GPIO Configuration Mode + * Elements values convention: 0x00WX00YZ + * - W : EXTI trigger detection on 3 bits + * - X : EXTI mode (IT or Event) on 2 bits + * - Y : Output type (Push Pull or Open Drain) on 1 bit + * - Z : GPIO mode (Input, Output, Alternate or Analog) on 2 bits + * @{ + */ +#define GPIO_MODE_INPUT MODE_INPUT /*!< Input Floating Mode */ +#define GPIO_MODE_OUTPUT_PP (MODE_OUTPUT | OUTPUT_PP) /*!< Output Push Pull Mode */ +#define GPIO_MODE_OUTPUT_OD (MODE_OUTPUT | OUTPUT_OD) /*!< Output Open Drain Mode */ +#define GPIO_MODE_AF_PP (MODE_AF | OUTPUT_PP) /*!< Alternate Function Push Pull Mode */ +#define GPIO_MODE_AF_OD (MODE_AF | OUTPUT_OD) /*!< Alternate Function Open Drain Mode */ +#define GPIO_MODE_ANALOG MODE_ANALOG /*!< Analog Mode */ +#define GPIO_MODE_ANALOG_ADC_CONTROL (MODE_ANALOG | 0x8uL) /*!< Analog Mode for ADC conversion (0x0000000Bu)*/ +#define GPIO_MODE_IT_RISING (MODE_INPUT | EXTI_IT | TRIGGER_RISING) /*!< External Interrupt Mode with Rising edge trigger detection */ +#define GPIO_MODE_IT_FALLING (MODE_INPUT | EXTI_IT | TRIGGER_FALLING) /*!< External Interrupt Mode with Falling edge trigger detection */ +#define GPIO_MODE_IT_RISING_FALLING (MODE_INPUT | EXTI_IT | TRIGGER_RISING | TRIGGER_FALLING) /*!< External Interrupt Mode with Rising/Falling edge trigger detection */ +#define GPIO_MODE_EVT_RISING (MODE_INPUT | EXTI_EVT | TRIGGER_RISING) /*!< External Event Mode with Rising edge trigger detection */ +#define GPIO_MODE_EVT_FALLING (MODE_INPUT | EXTI_EVT | TRIGGER_FALLING) /*!< External Event Mode with Falling edge trigger detection */ +#define GPIO_MODE_EVT_RISING_FALLING (MODE_INPUT | EXTI_EVT | TRIGGER_RISING | TRIGGER_FALLING) /*!< External Event Mode with Rising/Falling edge trigger detection */ +/** + * @} + */ + +/** @defgroup GPIO_speed GPIO speed + * @brief GPIO Output Maximum frequency + * @{ + */ +#define GPIO_SPEED_FREQ_LOW 0x00000000u /*!< Low speed */ +#define GPIO_SPEED_FREQ_MEDIUM 0x00000001u /*!< Medium speed */ +#define GPIO_SPEED_FREQ_HIGH 0x00000002u /*!< High speed */ +#define GPIO_SPEED_FREQ_VERY_HIGH 0x00000003u /*!< Very high speed */ +/** + * @} + */ + +/** @defgroup GPIO_pull GPIO pull + * @brief GPIO Pull-Up or Pull-Down Activation + * @{ + */ +#define GPIO_NOPULL 0x00000000u /*!< No Pull-up or Pull-down activation */ +#define GPIO_PULLUP 0x00000001u /*!< Pull-up activation */ +#define GPIO_PULLDOWN 0x00000002u /*!< Pull-down activation */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup GPIO_Exported_Macros GPIO Exported Macros + * @{ + */ + +/** + * @brief Check whether the specified EXTI line flag is set or not. + * @param __EXTI_LINE__ specifies the EXTI line flag to check. + * This parameter can be GPIO_PIN_x where x can be(0..15) + * @retval The new state of __EXTI_LINE__ (SET or RESET). + */ +#define __HAL_GPIO_EXTI_GET_FLAG(__EXTI_LINE__) (EXTI->PR1 & (__EXTI_LINE__)) + +/** + * @brief Clear the EXTI's line pending flags. + * @param __EXTI_LINE__ specifies the EXTI lines flags to clear. + * This parameter can be any combination of GPIO_PIN_x where x can be (0..15) + * @retval None + */ +#define __HAL_GPIO_EXTI_CLEAR_FLAG(__EXTI_LINE__) (EXTI->PR1 = (__EXTI_LINE__)) + +/** + * @brief Check whether the specified EXTI line is asserted or not. + * @param __EXTI_LINE__ specifies the EXTI line to check. + * This parameter can be GPIO_PIN_x where x can be(0..15) + * @retval The new state of __EXTI_LINE__ (SET or RESET). + */ +#define __HAL_GPIO_EXTI_GET_IT(__EXTI_LINE__) (EXTI->PR1 & (__EXTI_LINE__)) + +/** + * @brief Clear the EXTI's line pending bits. + * @param __EXTI_LINE__ specifies the EXTI lines to clear. + * This parameter can be any combination of GPIO_PIN_x where x can be (0..15) + * @retval None + */ +#define __HAL_GPIO_EXTI_CLEAR_IT(__EXTI_LINE__) (EXTI->PR1 = (__EXTI_LINE__)) + +/** + * @brief Generate a Software interrupt on selected EXTI line. + * @param __EXTI_LINE__ specifies the EXTI line to check. + * This parameter can be GPIO_PIN_x where x can be(0..15) + * @retval None + */ +#define __HAL_GPIO_EXTI_GENERATE_SWIT(__EXTI_LINE__) (EXTI->SWIER1 |= (__EXTI_LINE__)) + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup GPIO_Private_Constants GPIO Private Constants + * @{ + */ +#define GPIO_MODE_Pos 0u +#define GPIO_MODE (0x3uL << GPIO_MODE_Pos) +#define MODE_INPUT (0x0uL << GPIO_MODE_Pos) +#define MODE_OUTPUT (0x1uL << GPIO_MODE_Pos) +#define MODE_AF (0x2uL << GPIO_MODE_Pos) +#define MODE_ANALOG (0x3uL << GPIO_MODE_Pos) +#define OUTPUT_TYPE_Pos 4u +#define OUTPUT_TYPE (0x1uL << OUTPUT_TYPE_Pos) +#define OUTPUT_PP (0x0uL << OUTPUT_TYPE_Pos) +#define OUTPUT_OD (0x1uL << OUTPUT_TYPE_Pos) +#define EXTI_MODE_Pos 16u +#define EXTI_MODE (0x3uL << EXTI_MODE_Pos) +#define EXTI_IT (0x1uL << EXTI_MODE_Pos) +#define EXTI_EVT (0x2uL << EXTI_MODE_Pos) +#define TRIGGER_MODE_Pos 20u +#define TRIGGER_MODE (0x7uL << TRIGGER_MODE_Pos) +#define TRIGGER_RISING (0x1uL << TRIGGER_MODE_Pos) +#define TRIGGER_FALLING (0x2uL << TRIGGER_MODE_Pos) + +/** + * @} + */ + +/** @addtogroup GPIO_Private_Macros GPIO Private Macros + * @{ + */ +#define IS_GPIO_PIN_ACTION(ACTION) (((ACTION) == GPIO_PIN_RESET) || ((ACTION) == GPIO_PIN_SET)) + +#define IS_GPIO_PIN(__PIN__) ((((uint32_t)(__PIN__) & GPIO_PIN_MASK) != 0x00U) &&\ + (((uint32_t)(__PIN__) & ~GPIO_PIN_MASK) == 0x00U)) + +#define IS_GPIO_MODE(__MODE__) (((__MODE__) == GPIO_MODE_INPUT) ||\ + ((__MODE__) == GPIO_MODE_OUTPUT_PP) ||\ + ((__MODE__) == GPIO_MODE_OUTPUT_OD) ||\ + ((__MODE__) == GPIO_MODE_AF_PP) ||\ + ((__MODE__) == GPIO_MODE_AF_OD) ||\ + ((__MODE__) == GPIO_MODE_IT_RISING) ||\ + ((__MODE__) == GPIO_MODE_IT_FALLING) ||\ + ((__MODE__) == GPIO_MODE_IT_RISING_FALLING) ||\ + ((__MODE__) == GPIO_MODE_EVT_RISING) ||\ + ((__MODE__) == GPIO_MODE_EVT_FALLING) ||\ + ((__MODE__) == GPIO_MODE_EVT_RISING_FALLING) ||\ + ((__MODE__) == GPIO_MODE_ANALOG) ||\ + ((__MODE__) == GPIO_MODE_ANALOG_ADC_CONTROL)) + +#define IS_GPIO_SPEED(__SPEED__) (((__SPEED__) == GPIO_SPEED_FREQ_LOW) ||\ + ((__SPEED__) == GPIO_SPEED_FREQ_MEDIUM) ||\ + ((__SPEED__) == GPIO_SPEED_FREQ_HIGH) ||\ + ((__SPEED__) == GPIO_SPEED_FREQ_VERY_HIGH)) + +#define IS_GPIO_PULL(__PULL__) (((__PULL__) == GPIO_NOPULL) ||\ + ((__PULL__) == GPIO_PULLUP) || \ + ((__PULL__) == GPIO_PULLDOWN)) +/** + * @} + */ + +/* Include GPIO HAL Extended module */ +#include "stm32l4xx_hal_gpio_ex.h" + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup GPIO_Exported_Functions GPIO Exported Functions + * @{ + */ + +/** @addtogroup GPIO_Exported_Functions_Group1 Initialization/de-initialization functions + * @brief Initialization and Configuration functions + * @{ + */ + +/* Initialization and de-initialization functions *****************************/ +void HAL_GPIO_Init(GPIO_TypeDef *GPIOx, GPIO_InitTypeDef *GPIO_Init); +void HAL_GPIO_DeInit(GPIO_TypeDef *GPIOx, uint32_t GPIO_Pin); + +/** + * @} + */ + +/** @addtogroup GPIO_Exported_Functions_Group2 IO operation functions + * @{ + */ + +/* IO operation functions *****************************************************/ +GPIO_PinState HAL_GPIO_ReadPin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin); +void HAL_GPIO_WritePin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin, GPIO_PinState PinState); +void HAL_GPIO_TogglePin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin); +HAL_StatusTypeDef HAL_GPIO_LockPin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin); +void HAL_GPIO_EXTI_IRQHandler(uint16_t GPIO_Pin); +void HAL_GPIO_EXTI_Callback(uint16_t GPIO_Pin); + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32L4xx_HAL_GPIO_H */ + diff --git a/CablePositioning_IAP_V1.0/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_gpio_ex.h b/CablePositioning_IAP_V1.0/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_gpio_ex.h index 3cd9147..0a28d8a 100644 --- a/CablePositioning_IAP_V1.0/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_gpio_ex.h +++ b/CablePositioning_IAP_V1.0/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_gpio_ex.h @@ -1,1059 +1,1060 @@ -/** - ****************************************************************************** - * @file stm32l4xx_hal_gpio_ex.h - * @author MCD Application Team - * @brief Header file of GPIO HAL Extended module. - ****************************************************************************** - * @attention - * - * Copyright (c) 2017 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef STM32L4xx_HAL_GPIO_EX_H -#define STM32L4xx_HAL_GPIO_EX_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32l4xx_hal_def.h" - -/** @addtogroup STM32L4xx_HAL_Driver - * @{ - */ - -/** @defgroup GPIOEx GPIOEx - * @brief GPIO Extended HAL module driver - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ -/* Exported constants --------------------------------------------------------*/ -/** @defgroup GPIOEx_Exported_Constants GPIOEx Exported Constants - * @{ - */ - -/** @defgroup GPIOEx_Alternate_function_selection GPIOEx Alternate function selection - * @{ - */ - -#if defined(STM32L412xx) || defined(STM32L422xx) -/*--------------STM32L412xx/STM32L422xx---*/ -/** - * @brief AF 0 selection - */ -#define GPIO_AF0_RTC_50Hz ((uint8_t)0x00) /* RTC_50Hz Alternate Function mapping */ -#define GPIO_AF0_MCO ((uint8_t)0x00) /* MCO (MCO1 and MCO2) Alternate Function mapping */ -#define GPIO_AF0_SWJ ((uint8_t)0x00) /* SWJ (SWD and JTAG) Alternate Function mapping */ -#define GPIO_AF0_TRACE ((uint8_t)0x00) /* TRACE Alternate Function mapping */ - -/** - * @brief AF 1 selection - */ -#define GPIO_AF1_TIM1 ((uint8_t)0x01) /* TIM1 Alternate Function mapping */ -#define GPIO_AF1_TIM2 ((uint8_t)0x01) /* TIM2 Alternate Function mapping */ -#define GPIO_AF1_LPTIM1 ((uint8_t)0x01) /* LPTIM1 Alternate Function mapping */ -#define GPIO_AF1_IR ((uint8_t)0x01) /* IR Alternate Function mapping */ - -/** - * @brief AF 2 selection - */ -#define GPIO_AF2_TIM1 ((uint8_t)0x02) /* TIM1 Alternate Function mapping */ -#define GPIO_AF2_TIM2 ((uint8_t)0x02) /* TIM2 Alternate Function mapping */ - -/** - * @brief AF 3 selection - */ -#define GPIO_AF3_USART2 ((uint8_t)0x03) /* USART1 Alternate Function mapping */ -#define GPIO_AF3_TIM1_COMP1 ((uint8_t)0x03) /* TIM1/COMP1 Break in Alternate Function mapping */ - -/** - * @brief AF 4 selection - */ -#define GPIO_AF4_I2C1 ((uint8_t)0x04) /* I2C1 Alternate Function mapping */ -#define GPIO_AF4_I2C2 ((uint8_t)0x04) /* I2C2 Alternate Function mapping */ -#define GPIO_AF4_I2C3 ((uint8_t)0x04) /* I2C3 Alternate Function mapping */ - -/** - * @brief AF 5 selection - */ -#define GPIO_AF5_SPI1 ((uint8_t)0x05) /* SPI1 Alternate Function mapping */ -#define GPIO_AF5_SPI2 ((uint8_t)0x05) /* SPI2 Alternate Function mapping */ - -/** - * @brief AF 6 selection - */ -#define GPIO_AF6_COMP1 ((uint8_t)0x06) /* COMP1 Alternate Function mapping */ - -/** - * @brief AF 7 selection - */ -#define GPIO_AF7_USART1 ((uint8_t)0x07) /* USART1 Alternate Function mapping */ -#define GPIO_AF7_USART2 ((uint8_t)0x07) /* USART2 Alternate Function mapping */ -#define GPIO_AF7_USART3 ((uint8_t)0x07) /* USART3 Alternate Function mapping */ - -/** - * @brief AF 8 selection - */ -#define GPIO_AF8_LPUART1 ((uint8_t)0x08) /* LPUART1 Alternate Function mapping */ - -/** - * @brief AF 9 selection - */ -#define GPIO_AF9_TSC ((uint8_t)0x09) /* TSC Alternate Function mapping */ - -/** - * @brief AF 10 selection - */ -#define GPIO_AF10_USB_FS ((uint8_t)0x0A) /* USB_FS Alternate Function mapping */ -#define GPIO_AF10_QUADSPI ((uint8_t)0x0A) /* QUADSPI Alternate Function mapping */ - -/** - * @brief AF 12 selection - */ -#define GPIO_AF12_COMP1 ((uint8_t)0x0C) /* COMP1 Alternate Function mapping */ - - -/** - * @brief AF 14 selection - */ -#define GPIO_AF14_TIM2 ((uint8_t)0x0E) /* TIM2 Alternate Function mapping */ -#define GPIO_AF14_TIM15 ((uint8_t)0x0E) /* TIM15 Alternate Function mapping */ -#define GPIO_AF14_TIM16 ((uint8_t)0x0E) /* TIM16 Alternate Function mapping */ -#define GPIO_AF14_LPTIM2 ((uint8_t)0x0E) /* LPTIM2 Alternate Function mapping */ - -/** - * @brief AF 15 selection - */ -#define GPIO_AF15_EVENTOUT ((uint8_t)0x0F) /* EVENTOUT Alternate Function mapping */ - -#define IS_GPIO_AF(AF) ((AF) <= (uint8_t)0x0F) - -#endif /* STM32L412xx || STM32L422xx */ - -#if defined(STM32L431xx) || defined(STM32L432xx) || defined(STM32L433xx) || defined(STM32L442xx) || defined(STM32L443xx) -/*--------------STM32L431xx/STM32L432xx/STM32L433xx/STM32L442xx/STM32L443xx---*/ -/** - * @brief AF 0 selection - */ -#define GPIO_AF0_RTC_50Hz ((uint8_t)0x00) /* RTC_50Hz Alternate Function mapping */ -#define GPIO_AF0_MCO ((uint8_t)0x00) /* MCO (MCO1 and MCO2) Alternate Function mapping */ -#define GPIO_AF0_SWJ ((uint8_t)0x00) /* SWJ (SWD and JTAG) Alternate Function mapping */ -#if defined(STM32L433xx) || defined(STM32L443xx) -#define GPIO_AF0_LCDBIAS ((uint8_t)0x00) /* LCDBIAS Alternate Function mapping */ -#endif /* STM32L433xx || STM32L443xx */ -#define GPIO_AF0_TRACE ((uint8_t)0x00) /* TRACE Alternate Function mapping */ - -/** - * @brief AF 1 selection - */ -#define GPIO_AF1_TIM1 ((uint8_t)0x01) /* TIM1 Alternate Function mapping */ -#define GPIO_AF1_TIM2 ((uint8_t)0x01) /* TIM2 Alternate Function mapping */ -#define GPIO_AF1_LPTIM1 ((uint8_t)0x01) /* LPTIM1 Alternate Function mapping */ -#define GPIO_AF1_IR ((uint8_t)0x01) /* IR Alternate Function mapping */ - -/** - * @brief AF 2 selection - */ -#define GPIO_AF2_TIM1 ((uint8_t)0x02) /* TIM1 Alternate Function mapping */ -#define GPIO_AF2_TIM2 ((uint8_t)0x02) /* TIM2 Alternate Function mapping */ - -/** - * @brief AF 3 selection - */ -#define GPIO_AF3_USART2 ((uint8_t)0x03) /* USART1 Alternate Function mapping */ -#define GPIO_AF3_TIM1_COMP2 ((uint8_t)0x03) /* TIM1/COMP2 Break in Alternate Function mapping */ -#define GPIO_AF3_TIM1_COMP1 ((uint8_t)0x03) /* TIM1/COMP1 Break in Alternate Function mapping */ - -/** - * @brief AF 4 selection - */ -#define GPIO_AF4_I2C1 ((uint8_t)0x04) /* I2C1 Alternate Function mapping */ -#define GPIO_AF4_I2C2 ((uint8_t)0x04) /* I2C2 Alternate Function mapping */ -#define GPIO_AF4_I2C3 ((uint8_t)0x04) /* I2C3 Alternate Function mapping */ - -/** - * @brief AF 5 selection - */ -#define GPIO_AF5_SPI1 ((uint8_t)0x05) /* SPI1 Alternate Function mapping */ -#define GPIO_AF5_SPI2 ((uint8_t)0x05) /* SPI2 Alternate Function mapping */ - -/** - * @brief AF 6 selection - */ -#define GPIO_AF6_SPI3 ((uint8_t)0x06) /* SPI3 Alternate Function mapping */ -#define GPIO_AF6_COMP1 ((uint8_t)0x06) /* COMP1 Alternate Function mapping */ - -/** - * @brief AF 7 selection - */ -#define GPIO_AF7_USART1 ((uint8_t)0x07) /* USART1 Alternate Function mapping */ -#define GPIO_AF7_USART2 ((uint8_t)0x07) /* USART2 Alternate Function mapping */ -#define GPIO_AF7_USART3 ((uint8_t)0x07) /* USART3 Alternate Function mapping */ - -/** - * @brief AF 8 selection - */ -#define GPIO_AF8_LPUART1 ((uint8_t)0x08) /* LPUART1 Alternate Function mapping */ - -/** - * @brief AF 9 selection - */ -#define GPIO_AF9_CAN1 ((uint8_t)0x09) /* CAN1 Alternate Function mapping */ -#define GPIO_AF9_TSC ((uint8_t)0x09) /* TSC Alternate Function mapping */ - -/** - * @brief AF 10 selection - */ -#if defined(STM32L432xx) || defined(STM32L433xx) || defined(STM32L442xx) || defined(STM32L443xx) -#define GPIO_AF10_USB_FS ((uint8_t)0x0A) /* USB_FS Alternate Function mapping */ -#endif /* STM32L432xx || STM32L433xx || STM32L442xx || STM32L443xx */ -#define GPIO_AF10_QUADSPI ((uint8_t)0x0A) /* QUADSPI Alternate Function mapping */ - -#if defined(STM32L433xx) || defined(STM32L443xx) -/** - * @brief AF 11 selection - */ -#define GPIO_AF11_LCD ((uint8_t)0x0B) /* LCD Alternate Function mapping */ -#endif /* STM32L433xx || STM32L443xx */ - -/** - * @brief AF 12 selection - */ -#define GPIO_AF12_SWPMI1 ((uint8_t)0x0C) /* SWPMI1 Alternate Function mapping */ -#define GPIO_AF12_COMP1 ((uint8_t)0x0C) /* COMP1 Alternate Function mapping */ -#define GPIO_AF12_COMP2 ((uint8_t)0x0C) /* COMP2 Alternate Function mapping */ -#define GPIO_AF12_SDMMC1 ((uint8_t)0x0C) /* SDMMC1 Alternate Function mapping */ - -/** - * @brief AF 13 selection - */ -#define GPIO_AF13_SAI1 ((uint8_t)0x0D) /* SAI1 Alternate Function mapping */ - -/** - * @brief AF 14 selection - */ -#define GPIO_AF14_TIM2 ((uint8_t)0x0E) /* TIM2 Alternate Function mapping */ -#define GPIO_AF14_TIM15 ((uint8_t)0x0E) /* TIM15 Alternate Function mapping */ -#define GPIO_AF14_TIM16 ((uint8_t)0x0E) /* TIM16 Alternate Function mapping */ -#define GPIO_AF14_LPTIM2 ((uint8_t)0x0E) /* LPTIM2 Alternate Function mapping */ - -/** - * @brief AF 15 selection - */ -#define GPIO_AF15_EVENTOUT ((uint8_t)0x0F) /* EVENTOUT Alternate Function mapping */ - -#define IS_GPIO_AF(AF) ((AF) <= (uint8_t)0x0F) - -#endif /* STM32L431xx || STM32L432xx || STM32L433xx || STM32L442xx || STM32L443xx */ - -#if defined(STM32L451xx) || defined(STM32L452xx) || defined(STM32L462xx) -/*--------------STM32L451xx/STM32L452xx/STM32L462xx---------------------------*/ -/** - * @brief AF 0 selection - */ -#define GPIO_AF0_RTC_50Hz ((uint8_t)0x00) /* RTC_50Hz Alternate Function mapping */ -#define GPIO_AF0_MCO ((uint8_t)0x00) /* MCO (MCO1 and MCO2) Alternate Function mapping */ -#define GPIO_AF0_SWJ ((uint8_t)0x00) /* SWJ (SWD and JTAG) Alternate Function mapping */ -#define GPIO_AF0_TRACE ((uint8_t)0x00) /* TRACE Alternate Function mapping */ - -/** - * @brief AF 1 selection - */ -#define GPIO_AF1_TIM1 ((uint8_t)0x01) /* TIM1 Alternate Function mapping */ -#define GPIO_AF1_TIM2 ((uint8_t)0x01) /* TIM2 Alternate Function mapping */ -#define GPIO_AF1_LPTIM1 ((uint8_t)0x01) /* LPTIM1 Alternate Function mapping */ -#define GPIO_AF1_IR ((uint8_t)0x01) /* IR Alternate Function mapping */ - -/** - * @brief AF 2 selection - */ -#define GPIO_AF2_TIM1 ((uint8_t)0x02) /* TIM1 Alternate Function mapping */ -#define GPIO_AF2_TIM2 ((uint8_t)0x02) /* TIM2 Alternate Function mapping */ -#define GPIO_AF2_TIM3 ((uint8_t)0x02) /* TIM3 Alternate Function mapping */ -#define GPIO_AF2_I2C4 ((uint8_t)0x02) /* I2C4 Alternate Function mapping */ - -/** - * @brief AF 3 selection - */ -#define GPIO_AF3_TIM1_COMP2 ((uint8_t)0x03) /* TIM1/COMP2 Break in Alternate Function mapping */ -#define GPIO_AF3_TIM1_COMP1 ((uint8_t)0x03) /* TIM1/COMP1 Break in Alternate Function mapping */ -#define GPIO_AF3_USART2 ((uint8_t)0x03) /* USART2 Alternate Function mapping */ -#define GPIO_AF3_CAN1 ((uint8_t)0x03) /* CAN1 Alternate Function mapping */ -#define GPIO_AF3_I2C4 ((uint8_t)0x03) /* I2C4 Alternate Function mapping */ - -/** - * @brief AF 4 selection - */ -#define GPIO_AF4_I2C1 ((uint8_t)0x04) /* I2C1 Alternate Function mapping */ -#define GPIO_AF4_I2C2 ((uint8_t)0x04) /* I2C2 Alternate Function mapping */ -#define GPIO_AF4_I2C3 ((uint8_t)0x04) /* I2C3 Alternate Function mapping */ -#define GPIO_AF4_I2C4 ((uint8_t)0x04) /* I2C4 Alternate Function mapping */ - -/** - * @brief AF 5 selection - */ -#define GPIO_AF5_SPI1 ((uint8_t)0x05) /* SPI1 Alternate Function mapping */ -#define GPIO_AF5_SPI2 ((uint8_t)0x05) /* SPI2 Alternate Function mapping */ -#define GPIO_AF5_I2C4 ((uint8_t)0x05) /* I2C4 Alternate Function mapping */ - -/** - * @brief AF 6 selection - */ -#define GPIO_AF6_SPI3 ((uint8_t)0x06) /* SPI3 Alternate Function mapping */ -#define GPIO_AF6_DFSDM1 ((uint8_t)0x06) /* DFSDM1 Alternate Function mapping */ -#define GPIO_AF6_COMP1 ((uint8_t)0x06) /* COMP1 Alternate Function mapping */ - -/** - * @brief AF 7 selection - */ -#define GPIO_AF7_USART1 ((uint8_t)0x07) /* USART1 Alternate Function mapping */ -#define GPIO_AF7_USART2 ((uint8_t)0x07) /* USART2 Alternate Function mapping */ -#define GPIO_AF7_USART3 ((uint8_t)0x07) /* USART3 Alternate Function mapping */ - -/** - * @brief AF 8 selection - */ -#define GPIO_AF8_UART4 ((uint8_t)0x08) /* UART4 Alternate Function mapping */ -#define GPIO_AF8_LPUART1 ((uint8_t)0x08) /* LPUART1 Alternate Function mapping */ -#define GPIO_AF8_CAN1 ((uint8_t)0x08) /* CAN1 Alternate Function mapping */ - - -/** - * @brief AF 9 selection - */ -#define GPIO_AF9_CAN1 ((uint8_t)0x09) /* CAN1 Alternate Function mapping */ -#define GPIO_AF9_TSC ((uint8_t)0x09) /* TSC Alternate Function mapping */ - -/** - * @brief AF 10 selection - */ -#if defined(STM32L452xx) || defined(STM32L462xx) -#define GPIO_AF10_USB_FS ((uint8_t)0x0A) /* USB_FS Alternate Function mapping */ -#endif /* STM32L452xx || STM32L462xx */ -#define GPIO_AF10_QUADSPI ((uint8_t)0x0A) /* QUADSPI Alternate Function mapping */ -#define GPIO_AF10_CAN1 ((uint8_t)0x0A) /* CAN1 Alternate Function mapping */ - -/** - * @brief AF 11 selection - */ - -/** - * @brief AF 12 selection - */ -#define GPIO_AF12_COMP1 ((uint8_t)0x0C) /* COMP1 Alternate Function mapping */ -#define GPIO_AF12_COMP2 ((uint8_t)0x0C) /* COMP2 Alternate Function mapping */ -#define GPIO_AF12_SDMMC1 ((uint8_t)0x0C) /* SDMMC1 Alternate Function mapping */ - -/** - * @brief AF 13 selection - */ -#define GPIO_AF13_SAI1 ((uint8_t)0x0D) /* SAI1 Alternate Function mapping */ - -/** - * @brief AF 14 selection - */ -#define GPIO_AF14_TIM2 ((uint8_t)0x0E) /* TIM2 Alternate Function mapping */ -#define GPIO_AF14_TIM15 ((uint8_t)0x0E) /* TIM15 Alternate Function mapping */ -#define GPIO_AF14_TIM16 ((uint8_t)0x0E) /* TIM16 Alternate Function mapping */ -#define GPIO_AF14_TIM17 ((uint8_t)0x0E) /* TIM17 Alternate Function mapping */ -#define GPIO_AF14_LPTIM2 ((uint8_t)0x0E) /* LPTIM2 Alternate Function mapping */ - -/** - * @brief AF 15 selection - */ -#define GPIO_AF15_EVENTOUT ((uint8_t)0x0F) /* EVENTOUT Alternate Function mapping */ - -#define IS_GPIO_AF(AF) ((AF) <= (uint8_t)0x0F) - -#endif /* STM32L451xx || STM32L452xx || STM32L462xx */ - -#if defined(STM32L471xx) || defined(STM32L475xx) || defined(STM32L476xx) || defined(STM32L485xx) || defined(STM32L486xx) -/*--------------STM32L471xx/STM32L475xx/STM32L476xx/STM32L485xx/STM32L486xx---*/ -/** - * @brief AF 0 selection - */ -#define GPIO_AF0_RTC_50Hz ((uint8_t)0x00) /* RTC_50Hz Alternate Function mapping */ -#define GPIO_AF0_MCO ((uint8_t)0x00) /* MCO (MCO1 and MCO2) Alternate Function mapping */ -#define GPIO_AF0_SWJ ((uint8_t)0x00) /* SWJ (SWD and JTAG) Alternate Function mapping */ -#if defined(STM32L476xx) || defined(STM32L486xx) -#define GPIO_AF0_LCDBIAS ((uint8_t)0x00) /* LCDBIAS Alternate Function mapping */ -#endif /* STM32L476xx || STM32L486xx */ -#define GPIO_AF0_TRACE ((uint8_t)0x00) /* TRACE Alternate Function mapping */ - -/** - * @brief AF 1 selection - */ -#define GPIO_AF1_TIM1 ((uint8_t)0x01) /* TIM1 Alternate Function mapping */ -#define GPIO_AF1_TIM2 ((uint8_t)0x01) /* TIM2 Alternate Function mapping */ -#define GPIO_AF1_TIM5 ((uint8_t)0x01) /* TIM5 Alternate Function mapping */ -#define GPIO_AF1_TIM8 ((uint8_t)0x01) /* TIM8 Alternate Function mapping */ -#define GPIO_AF1_LPTIM1 ((uint8_t)0x01) /* LPTIM1 Alternate Function mapping */ -#define GPIO_AF1_IR ((uint8_t)0x01) /* IR Alternate Function mapping */ - -/** - * @brief AF 2 selection - */ -#define GPIO_AF2_TIM1 ((uint8_t)0x02) /* TIM1 Alternate Function mapping */ -#define GPIO_AF2_TIM2 ((uint8_t)0x02) /* TIM2 Alternate Function mapping */ -#define GPIO_AF2_TIM3 ((uint8_t)0x02) /* TIM3 Alternate Function mapping */ -#define GPIO_AF2_TIM4 ((uint8_t)0x02) /* TIM4 Alternate Function mapping */ -#define GPIO_AF2_TIM5 ((uint8_t)0x02) /* TIM5 Alternate Function mapping */ - -/** - * @brief AF 3 selection - */ -#define GPIO_AF3_TIM8 ((uint8_t)0x03) /* TIM8 Alternate Function mapping */ -#define GPIO_AF3_TIM1_COMP2 ((uint8_t)0x03) /* TIM1/COMP2 Break in Alternate Function mapping */ -#define GPIO_AF3_TIM1_COMP1 ((uint8_t)0x03) /* TIM1/COMP1 Break in Alternate Function mapping */ - -/** - * @brief AF 4 selection - */ -#define GPIO_AF4_I2C1 ((uint8_t)0x04) /* I2C1 Alternate Function mapping */ -#define GPIO_AF4_I2C2 ((uint8_t)0x04) /* I2C2 Alternate Function mapping */ -#define GPIO_AF4_I2C3 ((uint8_t)0x04) /* I2C3 Alternate Function mapping */ - -/** - * @brief AF 5 selection - */ -#define GPIO_AF5_SPI1 ((uint8_t)0x05) /* SPI1 Alternate Function mapping */ -#define GPIO_AF5_SPI2 ((uint8_t)0x05) /* SPI2 Alternate Function mapping */ - -/** - * @brief AF 6 selection - */ -#define GPIO_AF6_SPI3 ((uint8_t)0x06) /* SPI3 Alternate Function mapping */ -#define GPIO_AF6_DFSDM1 ((uint8_t)0x06) /* DFSDM1 Alternate Function mapping */ - -/** - * @brief AF 7 selection - */ -#define GPIO_AF7_USART1 ((uint8_t)0x07) /* USART1 Alternate Function mapping */ -#define GPIO_AF7_USART2 ((uint8_t)0x07) /* USART2 Alternate Function mapping */ -#define GPIO_AF7_USART3 ((uint8_t)0x07) /* USART3 Alternate Function mapping */ - -/** - * @brief AF 8 selection - */ -#define GPIO_AF8_UART4 ((uint8_t)0x08) /* UART4 Alternate Function mapping */ -#define GPIO_AF8_UART5 ((uint8_t)0x08) /* UART5 Alternate Function mapping */ -#define GPIO_AF8_LPUART1 ((uint8_t)0x08) /* LPUART1 Alternate Function mapping */ - - -/** - * @brief AF 9 selection - */ -#define GPIO_AF9_CAN1 ((uint8_t)0x09) /* CAN1 Alternate Function mapping */ -#define GPIO_AF9_TSC ((uint8_t)0x09) /* TSC Alternate Function mapping */ - -/** - * @brief AF 10 selection - */ -#if defined(STM32L475xx) || defined(STM32L476xx) || defined(STM32L485xx) || defined(STM32L486xx) -#define GPIO_AF10_OTG_FS ((uint8_t)0x0A) /* OTG_FS Alternate Function mapping */ -#endif /* STM32L475xx || STM32L476xx || STM32L485xx || STM32L486xx */ -#define GPIO_AF10_QUADSPI ((uint8_t)0x0A) /* QUADSPI Alternate Function mapping */ - -#if defined(STM32L476xx) || defined(STM32L486xx) -/** - * @brief AF 11 selection - */ -#define GPIO_AF11_LCD ((uint8_t)0x0B) /* LCD Alternate Function mapping */ -#endif /* STM32L476xx || STM32L486xx */ - -/** - * @brief AF 12 selection - */ -#define GPIO_AF12_FMC ((uint8_t)0x0C) /* FMC Alternate Function mapping */ -#define GPIO_AF12_SWPMI1 ((uint8_t)0x0C) /* SWPMI1 Alternate Function mapping */ -#define GPIO_AF12_COMP1 ((uint8_t)0x0C) /* COMP1 Alternate Function mapping */ -#define GPIO_AF12_COMP2 ((uint8_t)0x0C) /* COMP2 Alternate Function mapping */ -#define GPIO_AF12_SDMMC1 ((uint8_t)0x0C) /* SDMMC1 Alternate Function mapping */ - -/** - * @brief AF 13 selection - */ -#define GPIO_AF13_SAI1 ((uint8_t)0x0D) /* SAI1 Alternate Function mapping */ -#define GPIO_AF13_SAI2 ((uint8_t)0x0D) /* SAI2 Alternate Function mapping */ -#define GPIO_AF13_TIM8_COMP2 ((uint8_t)0x0D) /* TIM8/COMP2 Break in Alternate Function mapping */ -#define GPIO_AF13_TIM8_COMP1 ((uint8_t)0x0D) /* TIM8/COMP1 Break in Alternate Function mapping */ - -/** - * @brief AF 14 selection - */ -#define GPIO_AF14_TIM2 ((uint8_t)0x0E) /* TIM2 Alternate Function mapping */ -#define GPIO_AF14_TIM15 ((uint8_t)0x0E) /* TIM15 Alternate Function mapping */ -#define GPIO_AF14_TIM16 ((uint8_t)0x0E) /* TIM16 Alternate Function mapping */ -#define GPIO_AF14_TIM17 ((uint8_t)0x0E) /* TIM17 Alternate Function mapping */ -#define GPIO_AF14_LPTIM2 ((uint8_t)0x0E) /* LPTIM2 Alternate Function mapping */ -#define GPIO_AF14_TIM8_COMP1 ((uint8_t)0x0E) /* TIM8/COMP1 Break in Alternate Function mapping */ - -/** - * @brief AF 15 selection - */ -#define GPIO_AF15_EVENTOUT ((uint8_t)0x0F) /* EVENTOUT Alternate Function mapping */ - -#define IS_GPIO_AF(AF) ((AF) <= (uint8_t)0x0F) - -#endif /* STM32L471xx || STM32L475xx || STM32L476xx || STM32L485xx || STM32L486xx */ - -#if defined(STM32L496xx) || defined(STM32L4A6xx) -/*--------------------------------STM32L496xx/STM32L4A6xx---------------------*/ -/** - * @brief AF 0 selection - */ -#define GPIO_AF0_RTC_50Hz ((uint8_t)0x00) /* RTC_50Hz Alternate Function mapping */ -#define GPIO_AF0_MCO ((uint8_t)0x00) /* MCO (MCO1 and MCO2) Alternate Function mapping */ -#define GPIO_AF0_SWJ ((uint8_t)0x00) /* SWJ (SWD and JTAG) Alternate Function mapping */ -#define GPIO_AF0_TRACE ((uint8_t)0x00) /* TRACE Alternate Function mapping */ - -/** - * @brief AF 1 selection - */ -#define GPIO_AF1_TIM1 ((uint8_t)0x01) /* TIM1 Alternate Function mapping */ -#define GPIO_AF1_TIM2 ((uint8_t)0x01) /* TIM2 Alternate Function mapping */ -#define GPIO_AF1_TIM5 ((uint8_t)0x01) /* TIM5 Alternate Function mapping */ -#define GPIO_AF1_TIM8 ((uint8_t)0x01) /* TIM8 Alternate Function mapping */ -#define GPIO_AF1_LPTIM1 ((uint8_t)0x01) /* LPTIM1 Alternate Function mapping */ -#define GPIO_AF1_IR ((uint8_t)0x01) /* IR Alternate Function mapping */ - -/** - * @brief AF 2 selection - */ -#define GPIO_AF2_TIM1 ((uint8_t)0x02) /* TIM1 Alternate Function mapping */ -#define GPIO_AF2_TIM2 ((uint8_t)0x02) /* TIM2 Alternate Function mapping */ -#define GPIO_AF2_TIM3 ((uint8_t)0x02) /* TIM3 Alternate Function mapping */ -#define GPIO_AF2_TIM4 ((uint8_t)0x02) /* TIM4 Alternate Function mapping */ -#define GPIO_AF2_TIM5 ((uint8_t)0x02) /* TIM5 Alternate Function mapping */ -#define GPIO_AF2_I2C4 ((uint8_t)0x02) /* I2C4 Alternate Function mapping */ - -/** - * @brief AF 3 selection - */ -#define GPIO_AF3_TIM8 ((uint8_t)0x03) /* TIM8 Alternate Function mapping */ -#define GPIO_AF3_TIM1_COMP2 ((uint8_t)0x03) /* TIM1/COMP2 Break in Alternate Function mapping */ -#define GPIO_AF3_TIM1_COMP1 ((uint8_t)0x03) /* TIM1/COMP1 Break in Alternate Function mapping */ -#define GPIO_AF3_CAN2 ((uint8_t)0x03) /* CAN2 Alternate Function mapping */ -#define GPIO_AF3_I2C4 ((uint8_t)0x03) /* I2C4 Alternate Function mapping */ -#define GPIO_AF3_QUADSPI ((uint8_t)0x03) /* QUADSPI Alternate Function mapping */ -#define GPIO_AF3_SPI2 ((uint8_t)0x03) /* SPI2 Alternate Function mapping */ -#define GPIO_AF3_USART2 ((uint8_t)0x03) /* USART2 Alternate Function mapping */ - -/** - * @brief AF 4 selection - */ -#define GPIO_AF4_I2C1 ((uint8_t)0x04) /* I2C1 Alternate Function mapping */ -#define GPIO_AF4_I2C2 ((uint8_t)0x04) /* I2C2 Alternate Function mapping */ -#define GPIO_AF4_I2C3 ((uint8_t)0x04) /* I2C3 Alternate Function mapping */ -#define GPIO_AF4_I2C4 ((uint8_t)0x04) /* I2C4 Alternate Function mapping */ -#define GPIO_AF4_DCMI ((uint8_t)0x04) /* DCMI Alternate Function mapping */ - -/** - * @brief AF 5 selection - */ -#define GPIO_AF5_SPI1 ((uint8_t)0x05) /* SPI1 Alternate Function mapping */ -#define GPIO_AF5_SPI2 ((uint8_t)0x05) /* SPI2 Alternate Function mapping */ -#define GPIO_AF5_DCMI ((uint8_t)0x05) /* DCMI Alternate Function mapping */ -#define GPIO_AF5_I2C4 ((uint8_t)0x05) /* I2C4 Alternate Function mapping */ -#define GPIO_AF5_QUADSPI ((uint8_t)0x05) /* QUADSPI Alternate Function mapping */ - -/** - * @brief AF 6 selection - */ -#define GPIO_AF6_SPI3 ((uint8_t)0x06) /* SPI3 Alternate Function mapping */ -#define GPIO_AF6_DFSDM1 ((uint8_t)0x06) /* DFSDM1 Alternate Function mapping */ -#define GPIO_AF6_I2C3 ((uint8_t)0x06) /* I2C3 Alternate Function mapping */ - -/** - * @brief AF 7 selection - */ -#define GPIO_AF7_USART1 ((uint8_t)0x07) /* USART1 Alternate Function mapping */ -#define GPIO_AF7_USART2 ((uint8_t)0x07) /* USART2 Alternate Function mapping */ -#define GPIO_AF7_USART3 ((uint8_t)0x07) /* USART3 Alternate Function mapping */ - -/** - * @brief AF 8 selection - */ -#define GPIO_AF8_UART4 ((uint8_t)0x08) /* UART4 Alternate Function mapping */ -#define GPIO_AF8_UART5 ((uint8_t)0x08) /* UART5 Alternate Function mapping */ -#define GPIO_AF8_LPUART1 ((uint8_t)0x08) /* LPUART1 Alternate Function mapping */ -#define GPIO_AF8_CAN2 ((uint8_t)0x08) /* CAN2 Alternate Function mapping */ - -/** - * @brief AF 9 selection - */ -#define GPIO_AF9_CAN1 ((uint8_t)0x09) /* CAN1 Alternate Function mapping */ -#define GPIO_AF9_TSC ((uint8_t)0x09) /* TSC Alternate Function mapping */ - -/** - * @brief AF 10 selection - */ -#define GPIO_AF10_OTG_FS ((uint8_t)0x0A) /* OTG_FS Alternate Function mapping */ -#define GPIO_AF10_QUADSPI ((uint8_t)0x0A) /* QUADSPI Alternate Function mapping */ -#define GPIO_AF10_CAN2 ((uint8_t)0x0A) /* CAN2 Alternate Function mapping */ -#define GPIO_AF10_DCMI ((uint8_t)0x0A) /* DCMI Alternate Function mapping */ - -/** - * @brief AF 11 selection - */ -#define GPIO_AF11_LCD ((uint8_t)0x0B) /* LCD Alternate Function mapping */ - -/** - * @brief AF 12 selection - */ -#define GPIO_AF12_FMC ((uint8_t)0x0C) /* FMC Alternate Function mapping */ -#define GPIO_AF12_SWPMI1 ((uint8_t)0x0C) /* SWPMI1 Alternate Function mapping */ -#define GPIO_AF12_COMP1 ((uint8_t)0x0C) /* COMP1 Alternate Function mapping */ -#define GPIO_AF12_COMP2 ((uint8_t)0x0C) /* COMP2 Alternate Function mapping */ -#define GPIO_AF12_SDMMC1 ((uint8_t)0x0C) /* SDMMC1 Alternate Function mapping */ -#define GPIO_AF12_TIM1_COMP2 ((uint8_t)0x0C) /* TIM1/COMP2 Break in Alternate Function mapping */ -#define GPIO_AF12_TIM1_COMP1 ((uint8_t)0x0C) /* TIM1/COMP1 Break in Alternate Function mapping */ -#define GPIO_AF12_TIM8_COMP2 ((uint8_t)0x0C) /* TIM8/COMP2 Break in Alternate Function mapping */ - -/** - * @brief AF 13 selection - */ -#define GPIO_AF13_SAI1 ((uint8_t)0x0D) /* SAI1 Alternate Function mapping */ -#define GPIO_AF13_SAI2 ((uint8_t)0x0D) /* SAI2 Alternate Function mapping */ -#define GPIO_AF13_TIM8_COMP2 ((uint8_t)0x0D) /* TIM8/COMP2 Break in Alternate Function mapping */ -#define GPIO_AF13_TIM8_COMP1 ((uint8_t)0x0D) /* TIM8/COMP1 Break in Alternate Function mapping */ - -/** - * @brief AF 14 selection - */ -#define GPIO_AF14_TIM2 ((uint8_t)0x0E) /* TIM2 Alternate Function mapping */ -#define GPIO_AF14_TIM15 ((uint8_t)0x0E) /* TIM15 Alternate Function mapping */ -#define GPIO_AF14_TIM16 ((uint8_t)0x0E) /* TIM16 Alternate Function mapping */ -#define GPIO_AF14_TIM17 ((uint8_t)0x0E) /* TIM17 Alternate Function mapping */ -#define GPIO_AF14_LPTIM2 ((uint8_t)0x0E) /* LPTIM2 Alternate Function mapping */ -#define GPIO_AF14_TIM8_COMP1 ((uint8_t)0x0E) /* TIM8/COMP1 Break in Alternate Function mapping */ - -/** - * @brief AF 15 selection - */ -#define GPIO_AF15_EVENTOUT ((uint8_t)0x0F) /* EVENTOUT Alternate Function mapping */ - -#define IS_GPIO_AF(AF) ((AF) <= (uint8_t)0x0F) - -#endif /* STM32L496xx || STM32L4A6xx */ - -#if defined (STM32L4P5xx) || defined (STM32L4Q5xx) -/*---STM32L4P5xx/STM32L4Q5xx--*/ -/** - * @brief AF 0 selection - */ -#define GPIO_AF0_RTC_50Hz ((uint8_t)0x00) /* RTC_50Hz Alternate Function mapping */ -#define GPIO_AF0_MCO ((uint8_t)0x00) /* MCO (MCO1 and MCO2) Alternate Function mapping */ -#define GPIO_AF0_SWJ ((uint8_t)0x00) /* SWJ (SWD and JTAG) Alternate Function mapping */ -#define GPIO_AF0_TRACE ((uint8_t)0x00) /* TRACE Alternate Function mapping */ - -/** - * @brief AF 1 selection - */ -#define GPIO_AF1_TIM1 ((uint8_t)0x01) /* TIM1 Alternate Function mapping */ -#define GPIO_AF1_TIM2 ((uint8_t)0x01) /* TIM2 Alternate Function mapping */ -#define GPIO_AF1_TIM5 ((uint8_t)0x01) /* TIM5 Alternate Function mapping */ -#define GPIO_AF1_TIM8 ((uint8_t)0x01) /* TIM8 Alternate Function mapping */ -#define GPIO_AF1_LPTIM1 ((uint8_t)0x01) /* LPTIM1 Alternate Function mapping */ -#define GPIO_AF1_IR ((uint8_t)0x01) /* IR Alternate Function mapping */ - -/** - * @brief AF 2 selection - */ -#define GPIO_AF2_TIM1 ((uint8_t)0x02) /* TIM1 Alternate Function mapping */ -#define GPIO_AF2_TIM2 ((uint8_t)0x02) /* TIM2 Alternate Function mapping */ -#define GPIO_AF2_TIM3 ((uint8_t)0x02) /* TIM3 Alternate Function mapping */ -#define GPIO_AF2_TIM4 ((uint8_t)0x02) /* TIM4 Alternate Function mapping */ -#define GPIO_AF2_TIM5 ((uint8_t)0x02) /* TIM5 Alternate Function mapping */ - -/** - * @brief AF 3 selection - */ -#define GPIO_AF3_I2C4 ((uint8_t)0x03) /* I2C4 Alternate Function mapping */ -#define GPIO_AF3_OCTOSPIM_P1 ((uint8_t)0x03) /* OctoSPI Manager Port 1 Alternate Function mapping */ -#define GPIO_AF3_SAI1 ((uint8_t)0x03) /* SAI1 Alternate Function mapping */ -#define GPIO_AF3_SPI2 ((uint8_t)0x03) /* SPI2 Alternate Function mapping */ -#define GPIO_AF3_TIM1_COMP1 ((uint8_t)0x03) /* TIM1/COMP1 Break in Alternate Function mapping */ -#define GPIO_AF3_TIM1_COMP2 ((uint8_t)0x03) /* TIM1/COMP2 Break in Alternate Function mapping */ -#define GPIO_AF3_TIM8 ((uint8_t)0x03) /* TIM8 Alternate Function mapping */ -#define GPIO_AF3_TIM8_COMP1 ((uint8_t)0x03) /* TIM8/COMP1 Break in Alternate Function mapping */ -#define GPIO_AF3_TIM8_COMP2 ((uint8_t)0x03) /* TIM8/COMP2 Break in Alternate Function mapping */ -#define GPIO_AF3_USART2 ((uint8_t)0x03) /* USART2 Alternate Function mapping */ - -/** - * @brief AF 4 selection - */ -#define GPIO_AF4_I2C1 ((uint8_t)0x04) /* I2C1 Alternate Function mapping */ -#define GPIO_AF4_I2C2 ((uint8_t)0x04) /* I2C2 Alternate Function mapping */ -#define GPIO_AF4_I2C3 ((uint8_t)0x04) /* I2C3 Alternate Function mapping */ -#define GPIO_AF4_I2C4 ((uint8_t)0x04) /* I2C4 Alternate Function mapping */ -#define GPIO_AF4_DCMI ((uint8_t)0x04) /* DCMI Alternate Function mapping */ -#define GPIO_AF4_PSSI ((uint8_t)0x04) /* PSSI Alternate Function mapping */ - -/** - * @brief AF 5 selection - */ -#define GPIO_AF5_DCMI ((uint8_t)0x05) /* DCMI Alternate Function mapping */ -#define GPIO_AF5_PSSI ((uint8_t)0x05) /* PSSI Alternate Function mapping */ -#define GPIO_AF5_DFSDM1 ((uint8_t)0x05) /* DFSDM1 Alternate Function mapping */ -#define GPIO_AF5_I2C4 ((uint8_t)0x05) /* I2C4 Alternate Function mapping */ -#define GPIO_AF5_OCTOSPIM_P1 ((uint8_t)0x05) /* OctoSPI Manager Port 1 Alternate Function mapping */ -#define GPIO_AF5_OCTOSPIM_P2 ((uint8_t)0x05) /* OctoSPI Manager Port 2 Alternate Function mapping */ -#define GPIO_AF5_SPI1 ((uint8_t)0x05) /* SPI1 Alternate Function mapping */ -#define GPIO_AF5_SPI2 ((uint8_t)0x05) /* SPI2 Alternate Function mapping */ -#define GPIO_AF5_SPI3 ((uint8_t)0x05) /* SPI2 Alternate Function mapping */ - -/** - * @brief AF 6 selection - */ -#define GPIO_AF6_DFSDM1 ((uint8_t)0x06) /* DFSDM1 Alternate Function mapping */ -#define GPIO_AF6_I2C3 ((uint8_t)0x06) /* I2C3 Alternate Function mapping */ -#define GPIO_AF6_OCTOSPIM_P1 ((uint8_t)0x06) /* OctoSPI Manager Port 1 Alternate Function mapping */ -#define GPIO_AF6_OCTOSPIM_P2 ((uint8_t)0x06) /* OctoSPI Manager Port 2 Alternate Function mapping */ -#define GPIO_AF6_SPI3 ((uint8_t)0x06) /* SPI3 Alternate Function mapping */ - -/** - * @brief AF 7 selection - */ -#define GPIO_AF7_USART1 ((uint8_t)0x07) /* USART1 Alternate Function mapping */ -#define GPIO_AF7_USART2 ((uint8_t)0x07) /* USART2 Alternate Function mapping */ -#define GPIO_AF7_USART3 ((uint8_t)0x07) /* USART3 Alternate Function mapping */ -#define GPIO_AF7_SDMMC2 ((uint8_t)0x07) /* SDMMC2 Alternate Function mapping */ - -/** - * @brief AF 8 selection - */ -#define GPIO_AF8_LPUART1 ((uint8_t)0x08) /* LPUART1 Alternate Function mapping */ -#define GPIO_AF8_SDMMC1 ((uint8_t)0x08) /* SDMMC1 Alternate Function mapping */ -#define GPIO_AF8_SDMMC2 ((uint8_t)0x08) /* SDMMC1 Alternate Function mapping */ -#define GPIO_AF8_UART4 ((uint8_t)0x08) /* UART4 Alternate Function mapping */ -#define GPIO_AF8_UART5 ((uint8_t)0x08) /* UART5 Alternate Function mapping */ - -/** - * @brief AF 9 selection - */ -#define GPIO_AF9_CAN1 ((uint8_t)0x09) /* CAN1 Alternate Function mapping */ -#define GPIO_AF9_LTDC ((uint8_t)0x09) /* LTDC Alternate Function mapping */ -#define GPIO_AF9_TSC ((uint8_t)0x09) /* TSC Alternate Function mapping */ - -/** - * @brief AF 10 selection - */ -#define GPIO_AF10_DCMI ((uint8_t)0x0A) /* DCMI Alternate Function mapping */ -#define GPIO_AF10_PSSI ((uint8_t)0x0A) /* PSSI Alternate Function mapping */ -#define GPIO_AF10_OCTOSPIM_P1 ((uint8_t)0x0A) /* OctoSPI Manager Port 1 Alternate Function mapping */ -#define GPIO_AF10_OCTOSPIM_P2 ((uint8_t)0x0A) /* OctoSPI Manager Port 2 Alternate Function mapping */ -#define GPIO_AF10_OTG_FS ((uint8_t)0x0A) /* OTG_FS Alternate Function mapping */ - -/** - * @brief AF 11 selection - */ -#define GPIO_AF11_LTDC ((uint8_t)0x0B) /* LTDC Alternate Function mapping */ -#define GPIO_AF11_SDMMC2 ((uint8_t)0x0B) /* SDMMC2 Alternate Function mapping */ - -/** - * @brief AF 12 selection - */ -#define GPIO_AF12_COMP1 ((uint8_t)0x0C) /* COMP1 Alternate Function mapping */ -#define GPIO_AF12_COMP2 ((uint8_t)0x0C) /* COMP2 Alternate Function mapping */ -#define GPIO_AF12_FMC ((uint8_t)0x0C) /* FMC Alternate Function mapping */ -#define GPIO_AF12_SDMMC1 ((uint8_t)0x0C) /* SDMMC1 Alternate Function mapping */ -#define GPIO_AF12_SDMMC2 ((uint8_t)0x0C) /* SDMMC2 Alternate Function mapping */ -#define GPIO_AF12_TIM1_COMP1 ((uint8_t)0x0C) /* TIM1/COMP1 Break in Alternate Function mapping */ -#define GPIO_AF12_TIM1_COMP2 ((uint8_t)0x0C) /* TIM1/COMP2 Break in Alternate Function mapping */ -#define GPIO_AF12_TIM8_COMP2 ((uint8_t)0x0C) /* TIM8/COMP2 Break in Alternate Function mapping */ - -/** - * @brief AF 13 selection - */ -#define GPIO_AF13_SAI1 ((uint8_t)0x0D) /* SAI1 Alternate Function mapping */ -#define GPIO_AF13_SAI2 ((uint8_t)0x0D) /* SAI2 Alternate Function mapping */ -#define GPIO_AF13_TIM8_COMP1 ((uint8_t)0x0D) /* TIM8/COMP1 Break in Alternate Function mapping */ - -/** - * @brief AF 14 selection - */ -#define GPIO_AF14_TIM15 ((uint8_t)0x0E) /* TIM15 Alternate Function mapping */ -#define GPIO_AF14_TIM16 ((uint8_t)0x0E) /* TIM16 Alternate Function mapping */ -#define GPIO_AF14_TIM17 ((uint8_t)0x0E) /* TIM17 Alternate Function mapping */ -#define GPIO_AF14_LPTIM2 ((uint8_t)0x0E) /* LPTIM2 Alternate Function mapping */ -#define GPIO_AF14_TIM8_COMP2 ((uint8_t)0x0E) /* TIM8/COMP2 Break in Alternate Function mapping */ - -/** - * @brief AF 15 selection - */ -#define GPIO_AF15_EVENTOUT ((uint8_t)0x0F) /* EVENTOUT Alternate Function mapping */ - -#define IS_GPIO_AF(AF) ((AF) <= (uint8_t)0x0F) - -#endif /* STM32L4P5xx || STM32L4Q5xx */ - -#if defined (STM32L4R5xx) || defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined (STM32L4S9xx) -/*---STM32L4R5xx/STM32L4R7xx/STM32L4R9xx/STM32L4S5xx/STM32L4S7xx/STM32L4S9xx--*/ -/** - * @brief AF 0 selection - */ -#define GPIO_AF0_RTC_50Hz ((uint8_t)0x00) /* RTC_50Hz Alternate Function mapping */ -#define GPIO_AF0_MCO ((uint8_t)0x00) /* MCO (MCO1 and MCO2) Alternate Function mapping */ -#define GPIO_AF0_SWJ ((uint8_t)0x00) /* SWJ (SWD and JTAG) Alternate Function mapping */ -#define GPIO_AF0_TRACE ((uint8_t)0x00) /* TRACE Alternate Function mapping */ - -/** - * @brief AF 1 selection - */ -#define GPIO_AF1_TIM1 ((uint8_t)0x01) /* TIM1 Alternate Function mapping */ -#define GPIO_AF1_TIM2 ((uint8_t)0x01) /* TIM2 Alternate Function mapping */ -#define GPIO_AF1_TIM5 ((uint8_t)0x01) /* TIM5 Alternate Function mapping */ -#define GPIO_AF1_TIM8 ((uint8_t)0x01) /* TIM8 Alternate Function mapping */ -#define GPIO_AF1_LPTIM1 ((uint8_t)0x01) /* LPTIM1 Alternate Function mapping */ -#define GPIO_AF1_IR ((uint8_t)0x01) /* IR Alternate Function mapping */ - -/** - * @brief AF 2 selection - */ -#define GPIO_AF2_TIM1 ((uint8_t)0x02) /* TIM1 Alternate Function mapping */ -#define GPIO_AF2_TIM2 ((uint8_t)0x02) /* TIM2 Alternate Function mapping */ -#define GPIO_AF2_TIM3 ((uint8_t)0x02) /* TIM3 Alternate Function mapping */ -#define GPIO_AF2_TIM4 ((uint8_t)0x02) /* TIM4 Alternate Function mapping */ -#define GPIO_AF2_TIM5 ((uint8_t)0x02) /* TIM5 Alternate Function mapping */ - -/** - * @brief AF 3 selection - */ -#define GPIO_AF3_I2C4 ((uint8_t)0x03) /* I2C4 Alternate Function mapping */ -#define GPIO_AF3_OCTOSPIM_P1 ((uint8_t)0x03) /* OctoSPI Manager Port 1 Alternate Function mapping */ -#define GPIO_AF3_SAI1 ((uint8_t)0x03) /* SAI1 Alternate Function mapping */ -#define GPIO_AF3_SPI2 ((uint8_t)0x03) /* SPI2 Alternate Function mapping */ -#define GPIO_AF3_TIM1_COMP1 ((uint8_t)0x03) /* TIM1/COMP1 Break in Alternate Function mapping */ -#define GPIO_AF3_TIM1_COMP2 ((uint8_t)0x03) /* TIM1/COMP2 Break in Alternate Function mapping */ -#define GPIO_AF3_TIM8 ((uint8_t)0x03) /* TIM8 Alternate Function mapping */ -#define GPIO_AF3_TIM8_COMP1 ((uint8_t)0x03) /* TIM8/COMP1 Break in Alternate Function mapping */ -#define GPIO_AF3_TIM8_COMP2 ((uint8_t)0x03) /* TIM8/COMP2 Break in Alternate Function mapping */ -#define GPIO_AF3_USART2 ((uint8_t)0x03) /* USART2 Alternate Function mapping */ - -/** - * @brief AF 4 selection - */ -#define GPIO_AF4_I2C1 ((uint8_t)0x04) /* I2C1 Alternate Function mapping */ -#define GPIO_AF4_I2C2 ((uint8_t)0x04) /* I2C2 Alternate Function mapping */ -#define GPIO_AF4_I2C3 ((uint8_t)0x04) /* I2C3 Alternate Function mapping */ -#define GPIO_AF4_I2C4 ((uint8_t)0x04) /* I2C4 Alternate Function mapping */ -#define GPIO_AF4_DCMI ((uint8_t)0x04) /* DCMI Alternate Function mapping */ - -/** - * @brief AF 5 selection - */ -#define GPIO_AF5_DCMI ((uint8_t)0x05) /* DCMI Alternate Function mapping */ -#define GPIO_AF5_DFSDM1 ((uint8_t)0x05) /* DFSDM1 Alternate Function mapping */ -#define GPIO_AF5_I2C4 ((uint8_t)0x05) /* I2C4 Alternate Function mapping */ -#define GPIO_AF5_OCTOSPIM_P1 ((uint8_t)0x05) /* OctoSPI Manager Port 1 Alternate Function mapping */ -#define GPIO_AF5_OCTOSPIM_P2 ((uint8_t)0x05) /* OctoSPI Manager Port 2 Alternate Function mapping */ -#define GPIO_AF5_SPI1 ((uint8_t)0x05) /* SPI1 Alternate Function mapping */ -#define GPIO_AF5_SPI2 ((uint8_t)0x05) /* SPI2 Alternate Function mapping */ -#define GPIO_AF5_SPI3 ((uint8_t)0x05) /* SPI2 Alternate Function mapping */ - -/** - * @brief AF 6 selection - */ -#define GPIO_AF6_DFSDM1 ((uint8_t)0x06) /* DFSDM1 Alternate Function mapping */ -#define GPIO_AF6_I2C3 ((uint8_t)0x06) /* I2C3 Alternate Function mapping */ -#define GPIO_AF6_SPI3 ((uint8_t)0x06) /* SPI3 Alternate Function mapping */ - -/** - * @brief AF 7 selection - */ -#define GPIO_AF7_USART1 ((uint8_t)0x07) /* USART1 Alternate Function mapping */ -#define GPIO_AF7_USART2 ((uint8_t)0x07) /* USART2 Alternate Function mapping */ -#define GPIO_AF7_USART3 ((uint8_t)0x07) /* USART3 Alternate Function mapping */ - -/** - * @brief AF 8 selection - */ -#define GPIO_AF8_LPUART1 ((uint8_t)0x08) /* LPUART1 Alternate Function mapping */ -#define GPIO_AF8_SDMMC1 ((uint8_t)0x08) /* SDMMC1 Alternate Function mapping */ -#define GPIO_AF8_UART4 ((uint8_t)0x08) /* UART4 Alternate Function mapping */ -#define GPIO_AF8_UART5 ((uint8_t)0x08) /* UART5 Alternate Function mapping */ - -/** - * @brief AF 9 selection - */ -#define GPIO_AF9_CAN1 ((uint8_t)0x09) /* CAN1 Alternate Function mapping */ -#define GPIO_AF9_LTDC ((uint8_t)0x09) /* LTDC Alternate Function mapping */ -#define GPIO_AF9_TSC ((uint8_t)0x09) /* TSC Alternate Function mapping */ - -/** - * @brief AF 10 selection - */ -#define GPIO_AF10_DCMI ((uint8_t)0x0A) /* DCMI Alternate Function mapping */ -#define GPIO_AF10_OCTOSPIM_P1 ((uint8_t)0x0A) /* OctoSPI Manager Port 1 Alternate Function mapping */ -#define GPIO_AF10_OCTOSPIM_P2 ((uint8_t)0x0A) /* OctoSPI Manager Port 2 Alternate Function mapping */ -#define GPIO_AF10_OTG_FS ((uint8_t)0x0A) /* OTG_FS Alternate Function mapping */ - -/** - * @brief AF 11 selection - */ -#define GPIO_AF11_DSI ((uint8_t)0x0B) /* DSI Alternate Function mapping */ -#define GPIO_AF11_LTDC ((uint8_t)0x0B) /* LTDC Alternate Function mapping */ - -/** - * @brief AF 12 selection - */ -#define GPIO_AF12_COMP1 ((uint8_t)0x0C) /* COMP1 Alternate Function mapping */ -#define GPIO_AF12_COMP2 ((uint8_t)0x0C) /* COMP2 Alternate Function mapping */ -#define GPIO_AF12_DSI ((uint8_t)0x0C) /* DSI Alternate Function mapping */ -#define GPIO_AF12_FMC ((uint8_t)0x0C) /* FMC Alternate Function mapping */ -#define GPIO_AF12_SDMMC1 ((uint8_t)0x0C) /* SDMMC1 Alternate Function mapping */ -#define GPIO_AF12_TIM1_COMP1 ((uint8_t)0x0C) /* TIM1/COMP1 Break in Alternate Function mapping */ -#define GPIO_AF12_TIM1_COMP2 ((uint8_t)0x0C) /* TIM1/COMP2 Break in Alternate Function mapping */ -#define GPIO_AF12_TIM8_COMP2 ((uint8_t)0x0C) /* TIM8/COMP2 Break in Alternate Function mapping */ - -/** - * @brief AF 13 selection - */ -#define GPIO_AF13_SAI1 ((uint8_t)0x0D) /* SAI1 Alternate Function mapping */ -#define GPIO_AF13_SAI2 ((uint8_t)0x0D) /* SAI2 Alternate Function mapping */ -#define GPIO_AF13_TIM8_COMP1 ((uint8_t)0x0D) /* TIM8/COMP1 Break in Alternate Function mapping */ - -/** - * @brief AF 14 selection - */ -#define GPIO_AF14_TIM2 ((uint8_t)0x0E) /* TIM2 Alternate Function mapping */ -#define GPIO_AF14_TIM15 ((uint8_t)0x0E) /* TIM15 Alternate Function mapping */ -#define GPIO_AF14_TIM16 ((uint8_t)0x0E) /* TIM16 Alternate Function mapping */ -#define GPIO_AF14_TIM17 ((uint8_t)0x0E) /* TIM17 Alternate Function mapping */ -#define GPIO_AF14_LPTIM2 ((uint8_t)0x0E) /* LPTIM2 Alternate Function mapping */ -#define GPIO_AF14_TIM8_COMP2 ((uint8_t)0x0E) /* TIM8/COMP2 Break in Alternate Function mapping */ - -/** - * @brief AF 15 selection - */ -#define GPIO_AF15_EVENTOUT ((uint8_t)0x0F) /* EVENTOUT Alternate Function mapping */ - -#define IS_GPIO_AF(AF) ((AF) <= (uint8_t)0x0F) - -#endif /* STM32L4R5xx || STM32L4R7xx || STM32L4R9xx || STM32L4S5xx || STM32L4S7xx || STM32L4S9xx */ - -/** - * @} - */ - -/** - * @} - */ - -/* Exported macro ------------------------------------------------------------*/ -/** @defgroup GPIOEx_Exported_Macros GPIOEx Exported Macros - * @{ - */ - -/** @defgroup GPIOEx_Get_Port_Index GPIOEx_Get Port Index -* @{ - */ -#if defined(STM32L412xx) || defined(STM32L422xx) - -#define GPIO_GET_INDEX(__GPIOx__) (((__GPIOx__) == (GPIOA))? 0uL :\ - ((__GPIOx__) == (GPIOB))? 1uL :\ - ((__GPIOx__) == (GPIOC))? 2uL :\ - ((__GPIOx__) == (GPIOD))? 3uL : 7uL) - -#endif /* STM32L412xx || STM32L422xx */ - -#if defined(STM32L431xx) || defined(STM32L433xx) || defined(STM32L443xx) - -#define GPIO_GET_INDEX(__GPIOx__) (((__GPIOx__) == (GPIOA))? 0uL :\ - ((__GPIOx__) == (GPIOB))? 1uL :\ - ((__GPIOx__) == (GPIOC))? 2uL :\ - ((__GPIOx__) == (GPIOD))? 3uL :\ - ((__GPIOx__) == (GPIOE))? 4uL : 7uL) - -#endif /* STM32L431xx || STM32L433xx || STM32L443xx */ - -#if defined(STM32L432xx) || defined(STM32L442xx) - -#define GPIO_GET_INDEX(__GPIOx__) (((__GPIOx__) == (GPIOA))? 0uL :\ - ((__GPIOx__) == (GPIOB))? 1uL :\ - ((__GPIOx__) == (GPIOC))? 2uL : 7uL) - -#endif /* STM32L432xx || STM32L442xx */ - -#if defined(STM32L451xx) || defined(STM32L452xx) || defined(STM32L462xx) - -#define GPIO_GET_INDEX(__GPIOx__) (((__GPIOx__) == (GPIOA))? 0uL :\ - ((__GPIOx__) == (GPIOB))? 1uL :\ - ((__GPIOx__) == (GPIOC))? 2uL :\ - ((__GPIOx__) == (GPIOD))? 3uL :\ - ((__GPIOx__) == (GPIOE))? 4uL : 7uL) - -#endif /* STM32L451xx || STM32L452xx || STM32L462xx */ - -#if defined(STM32L471xx) || defined(STM32L475xx) || defined(STM32L476xx) || defined(STM32L485xx) || defined(STM32L486xx) - -#define GPIO_GET_INDEX(__GPIOx__) (((__GPIOx__) == (GPIOA))? 0uL :\ - ((__GPIOx__) == (GPIOB))? 1uL :\ - ((__GPIOx__) == (GPIOC))? 2uL :\ - ((__GPIOx__) == (GPIOD))? 3uL :\ - ((__GPIOx__) == (GPIOE))? 4uL :\ - ((__GPIOx__) == (GPIOF))? 5uL :\ - ((__GPIOx__) == (GPIOG))? 6uL : 7uL) - -#endif /* STM32L471xx || STM32L475xx || STM32L476xx || STM32L485xx || STM32L486xx */ - -#if defined(STM32L496xx) || defined(STM32L4A6xx) - -#define GPIO_GET_INDEX(__GPIOx__) (((__GPIOx__) == (GPIOA))? 0uL :\ - ((__GPIOx__) == (GPIOB))? 1uL :\ - ((__GPIOx__) == (GPIOC))? 2uL :\ - ((__GPIOx__) == (GPIOD))? 3uL :\ - ((__GPIOx__) == (GPIOE))? 4uL :\ - ((__GPIOx__) == (GPIOF))? 5uL :\ - ((__GPIOx__) == (GPIOG))? 6uL :\ - ((__GPIOx__) == (GPIOH))? 7uL : 8uL) - -#endif /* STM32L496xx || STM32L4A6xx */ - -#if defined (STM32L4P5xx) || defined (STM32L4Q5xx) || defined (STM32L4R5xx) || defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined (STM32L4S9xx) - -#define GPIO_GET_INDEX(__GPIOx__) (((__GPIOx__) == (GPIOA))? 0uL :\ - ((__GPIOx__) == (GPIOB))? 1uL :\ - ((__GPIOx__) == (GPIOC))? 2uL :\ - ((__GPIOx__) == (GPIOD))? 3uL :\ - ((__GPIOx__) == (GPIOE))? 4uL :\ - ((__GPIOx__) == (GPIOF))? 5uL :\ - ((__GPIOx__) == (GPIOG))? 6uL :\ - ((__GPIOx__) == (GPIOH))? 7uL : 8uL) - -#endif /* STM32L4P5xx || STM32L4Q5xx || STM32L4R5xx || STM32L4R7xx || STM32L4R9xx || STM32L4S5xx || STM32L4S7xx || STM32L4S9xx */ - -/** - * @} - */ - -/** - * @} - */ - -/* Exported functions --------------------------------------------------------*/ -/** - * @} - */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /* STM32L4xx_HAL_GPIO_EX_H */ - +/** + ****************************************************************************** + * @file stm32l4xx_hal_gpio_ex.h + * @author MCD Application Team + * @brief Header file of GPIO HAL Extended module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32L4xx_HAL_GPIO_EX_H +#define STM32L4xx_HAL_GPIO_EX_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l4xx_hal_def.h" + +/** @addtogroup STM32L4xx_HAL_Driver + * @{ + */ + +/** @defgroup GPIOEx GPIOEx + * @brief GPIO Extended HAL module driver + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ +/** @defgroup GPIOEx_Exported_Constants GPIOEx Exported Constants + * @{ + */ + +/** @defgroup GPIOEx_Alternate_function_selection GPIOEx Alternate function selection + * @{ + */ + +#if defined(STM32L412xx) || defined(STM32L422xx) +/*--------------STM32L412xx/STM32L422xx---*/ +/** + * @brief AF 0 selection + */ +#define GPIO_AF0_RTC_50Hz ((uint8_t)0x00) /* RTC_50Hz Alternate Function mapping */ +#define GPIO_AF0_MCO ((uint8_t)0x00) /* MCO (MCO1 and MCO2) Alternate Function mapping */ +#define GPIO_AF0_SWJ ((uint8_t)0x00) /* SWJ (SWD and JTAG) Alternate Function mapping */ +#define GPIO_AF0_TRACE ((uint8_t)0x00) /* TRACE Alternate Function mapping */ + +/** + * @brief AF 1 selection + */ +#define GPIO_AF1_TIM1 ((uint8_t)0x01) /* TIM1 Alternate Function mapping */ +#define GPIO_AF1_TIM2 ((uint8_t)0x01) /* TIM2 Alternate Function mapping */ +#define GPIO_AF1_LPTIM1 ((uint8_t)0x01) /* LPTIM1 Alternate Function mapping */ +#define GPIO_AF1_IR ((uint8_t)0x01) /* IR Alternate Function mapping */ + +/** + * @brief AF 2 selection + */ +#define GPIO_AF2_TIM1 ((uint8_t)0x02) /* TIM1 Alternate Function mapping */ +#define GPIO_AF2_TIM2 ((uint8_t)0x02) /* TIM2 Alternate Function mapping */ + +/** + * @brief AF 3 selection + */ +#define GPIO_AF3_USART2 ((uint8_t)0x03) /* USART1 Alternate Function mapping */ +#define GPIO_AF3_TIM1_COMP1 ((uint8_t)0x03) /* TIM1/COMP1 Break in Alternate Function mapping */ + +/** + * @brief AF 4 selection + */ +#define GPIO_AF4_I2C1 ((uint8_t)0x04) /* I2C1 Alternate Function mapping */ +#define GPIO_AF4_I2C2 ((uint8_t)0x04) /* I2C2 Alternate Function mapping */ +#define GPIO_AF4_I2C3 ((uint8_t)0x04) /* I2C3 Alternate Function mapping */ + +/** + * @brief AF 5 selection + */ +#define GPIO_AF5_SPI1 ((uint8_t)0x05) /* SPI1 Alternate Function mapping */ +#define GPIO_AF5_SPI2 ((uint8_t)0x05) /* SPI2 Alternate Function mapping */ + +/** + * @brief AF 6 selection + */ +#define GPIO_AF6_COMP1 ((uint8_t)0x06) /* COMP1 Alternate Function mapping */ + +/** + * @brief AF 7 selection + */ +#define GPIO_AF7_USART1 ((uint8_t)0x07) /* USART1 Alternate Function mapping */ +#define GPIO_AF7_USART2 ((uint8_t)0x07) /* USART2 Alternate Function mapping */ +#define GPIO_AF7_USART3 ((uint8_t)0x07) /* USART3 Alternate Function mapping */ + +/** + * @brief AF 8 selection + */ +#define GPIO_AF8_LPUART1 ((uint8_t)0x08) /* LPUART1 Alternate Function mapping */ + +/** + * @brief AF 9 selection + */ +#define GPIO_AF9_TSC ((uint8_t)0x09) /* TSC Alternate Function mapping */ + +/** + * @brief AF 10 selection + */ +#define GPIO_AF10_USB_FS ((uint8_t)0x0A) /* USB_FS Alternate Function mapping */ +#define GPIO_AF10_QUADSPI ((uint8_t)0x0A) /* QUADSPI Alternate Function mapping */ + +/** + * @brief AF 12 selection + */ +#define GPIO_AF12_COMP1 ((uint8_t)0x0C) /* COMP1 Alternate Function mapping */ + + +/** + * @brief AF 14 selection + */ +#define GPIO_AF14_TIM2 ((uint8_t)0x0E) /* TIM2 Alternate Function mapping */ +#define GPIO_AF14_TIM15 ((uint8_t)0x0E) /* TIM15 Alternate Function mapping */ +#define GPIO_AF14_TIM16 ((uint8_t)0x0E) /* TIM16 Alternate Function mapping */ +#define GPIO_AF14_LPTIM2 ((uint8_t)0x0E) /* LPTIM2 Alternate Function mapping */ + +/** + * @brief AF 15 selection + */ +#define GPIO_AF15_EVENTOUT ((uint8_t)0x0F) /* EVENTOUT Alternate Function mapping */ + +#define IS_GPIO_AF(AF) ((AF) <= (uint8_t)0x0F) + +#endif /* STM32L412xx || STM32L422xx */ + +#if defined(STM32L431xx) || defined(STM32L432xx) || defined(STM32L433xx) || defined(STM32L442xx) || defined(STM32L443xx) +/*--------------STM32L431xx/STM32L432xx/STM32L433xx/STM32L442xx/STM32L443xx---*/ +/** + * @brief AF 0 selection + */ +#define GPIO_AF0_RTC_50Hz ((uint8_t)0x00) /* RTC_50Hz Alternate Function mapping */ +#define GPIO_AF0_MCO ((uint8_t)0x00) /* MCO (MCO1 and MCO2) Alternate Function mapping */ +#define GPIO_AF0_SWJ ((uint8_t)0x00) /* SWJ (SWD and JTAG) Alternate Function mapping */ +#if defined(STM32L433xx) || defined(STM32L443xx) +#define GPIO_AF0_LCDBIAS ((uint8_t)0x00) /* LCDBIAS Alternate Function mapping */ +#endif /* STM32L433xx || STM32L443xx */ +#define GPIO_AF0_TRACE ((uint8_t)0x00) /* TRACE Alternate Function mapping */ + +/** + * @brief AF 1 selection + */ +#define GPIO_AF1_TIM1 ((uint8_t)0x01) /* TIM1 Alternate Function mapping */ +#define GPIO_AF1_TIM2 ((uint8_t)0x01) /* TIM2 Alternate Function mapping */ +#define GPIO_AF1_LPTIM1 ((uint8_t)0x01) /* LPTIM1 Alternate Function mapping */ +#define GPIO_AF1_IR ((uint8_t)0x01) /* IR Alternate Function mapping */ + +/** + * @brief AF 2 selection + */ +#define GPIO_AF2_TIM1 ((uint8_t)0x02) /* TIM1 Alternate Function mapping */ +#define GPIO_AF2_TIM2 ((uint8_t)0x02) /* TIM2 Alternate Function mapping */ + +/** + * @brief AF 3 selection + */ +#define GPIO_AF3_USART2 ((uint8_t)0x03) /* USART1 Alternate Function mapping */ +#define GPIO_AF3_TIM1_COMP2 ((uint8_t)0x03) /* TIM1/COMP2 Break in Alternate Function mapping */ +#define GPIO_AF3_TIM1_COMP1 ((uint8_t)0x03) /* TIM1/COMP1 Break in Alternate Function mapping */ + +/** + * @brief AF 4 selection + */ +#define GPIO_AF4_I2C1 ((uint8_t)0x04) /* I2C1 Alternate Function mapping */ +#define GPIO_AF4_I2C2 ((uint8_t)0x04) /* I2C2 Alternate Function mapping */ +#define GPIO_AF4_I2C3 ((uint8_t)0x04) /* I2C3 Alternate Function mapping */ + +/** + * @brief AF 5 selection + */ +#define GPIO_AF5_SPI1 ((uint8_t)0x05) /* SPI1 Alternate Function mapping */ +#define GPIO_AF5_SPI2 ((uint8_t)0x05) /* SPI2 Alternate Function mapping */ + +/** + * @brief AF 6 selection + */ +#define GPIO_AF6_SPI3 ((uint8_t)0x06) /* SPI3 Alternate Function mapping */ +#define GPIO_AF6_COMP1 ((uint8_t)0x06) /* COMP1 Alternate Function mapping */ + +/** + * @brief AF 7 selection + */ +#define GPIO_AF7_USART1 ((uint8_t)0x07) /* USART1 Alternate Function mapping */ +#define GPIO_AF7_USART2 ((uint8_t)0x07) /* USART2 Alternate Function mapping */ +#define GPIO_AF7_USART3 ((uint8_t)0x07) /* USART3 Alternate Function mapping */ + +/** + * @brief AF 8 selection + */ +#define GPIO_AF8_LPUART1 ((uint8_t)0x08) /* LPUART1 Alternate Function mapping */ + +/** + * @brief AF 9 selection + */ +#define GPIO_AF9_CAN1 ((uint8_t)0x09) /* CAN1 Alternate Function mapping */ +#define GPIO_AF9_TSC ((uint8_t)0x09) /* TSC Alternate Function mapping */ + +/** + * @brief AF 10 selection + */ +#if defined(STM32L432xx) || defined(STM32L433xx) || defined(STM32L442xx) || defined(STM32L443xx) +#define GPIO_AF10_USB_FS ((uint8_t)0x0A) /* USB_FS Alternate Function mapping */ +#endif /* STM32L432xx || STM32L433xx || STM32L442xx || STM32L443xx */ +#define GPIO_AF10_QUADSPI ((uint8_t)0x0A) /* QUADSPI Alternate Function mapping */ + +#if defined(STM32L433xx) || defined(STM32L443xx) +/** + * @brief AF 11 selection + */ +#define GPIO_AF11_LCD ((uint8_t)0x0B) /* LCD Alternate Function mapping */ +#endif /* STM32L433xx || STM32L443xx */ + +/** + * @brief AF 12 selection + */ +#define GPIO_AF12_SWPMI1 ((uint8_t)0x0C) /* SWPMI1 Alternate Function mapping */ +#define GPIO_AF12_COMP1 ((uint8_t)0x0C) /* COMP1 Alternate Function mapping */ +#define GPIO_AF12_COMP2 ((uint8_t)0x0C) /* COMP2 Alternate Function mapping */ +#define GPIO_AF12_SDMMC1 ((uint8_t)0x0C) /* SDMMC1 Alternate Function mapping */ + +/** + * @brief AF 13 selection + */ +#define GPIO_AF13_SAI1 ((uint8_t)0x0D) /* SAI1 Alternate Function mapping */ + +/** + * @brief AF 14 selection + */ +#define GPIO_AF14_TIM2 ((uint8_t)0x0E) /* TIM2 Alternate Function mapping */ +#define GPIO_AF14_TIM15 ((uint8_t)0x0E) /* TIM15 Alternate Function mapping */ +#define GPIO_AF14_TIM16 ((uint8_t)0x0E) /* TIM16 Alternate Function mapping */ +#define GPIO_AF14_LPTIM2 ((uint8_t)0x0E) /* LPTIM2 Alternate Function mapping */ + +/** + * @brief AF 15 selection + */ +#define GPIO_AF15_EVENTOUT ((uint8_t)0x0F) /* EVENTOUT Alternate Function mapping */ + +#define IS_GPIO_AF(AF) ((AF) <= (uint8_t)0x0F) + +#endif /* STM32L431xx || STM32L432xx || STM32L433xx || STM32L442xx || STM32L443xx */ + +#if defined(STM32L451xx) || defined(STM32L452xx) || defined(STM32L462xx) +/*--------------STM32L451xx/STM32L452xx/STM32L462xx---------------------------*/ +/** + * @brief AF 0 selection + */ +#define GPIO_AF0_RTC_50Hz ((uint8_t)0x00) /* RTC_50Hz Alternate Function mapping */ +#define GPIO_AF0_MCO ((uint8_t)0x00) /* MCO (MCO1 and MCO2) Alternate Function mapping */ +#define GPIO_AF0_SWJ ((uint8_t)0x00) /* SWJ (SWD and JTAG) Alternate Function mapping */ +#define GPIO_AF0_TRACE ((uint8_t)0x00) /* TRACE Alternate Function mapping */ + +/** + * @brief AF 1 selection + */ +#define GPIO_AF1_TIM1 ((uint8_t)0x01) /* TIM1 Alternate Function mapping */ +#define GPIO_AF1_TIM2 ((uint8_t)0x01) /* TIM2 Alternate Function mapping */ +#define GPIO_AF1_LPTIM1 ((uint8_t)0x01) /* LPTIM1 Alternate Function mapping */ +#define GPIO_AF1_IR ((uint8_t)0x01) /* IR Alternate Function mapping */ + +/** + * @brief AF 2 selection + */ +#define GPIO_AF2_TIM1 ((uint8_t)0x02) /* TIM1 Alternate Function mapping */ +#define GPIO_AF2_TIM2 ((uint8_t)0x02) /* TIM2 Alternate Function mapping */ +#define GPIO_AF2_TIM3 ((uint8_t)0x02) /* TIM3 Alternate Function mapping */ +#define GPIO_AF2_I2C4 ((uint8_t)0x02) /* I2C4 Alternate Function mapping */ + +/** + * @brief AF 3 selection + */ +#define GPIO_AF3_TIM1_COMP2 ((uint8_t)0x03) /* TIM1/COMP2 Break in Alternate Function mapping */ +#define GPIO_AF3_TIM1_COMP1 ((uint8_t)0x03) /* TIM1/COMP1 Break in Alternate Function mapping */ +#define GPIO_AF3_USART2 ((uint8_t)0x03) /* USART2 Alternate Function mapping */ +#define GPIO_AF3_CAN1 ((uint8_t)0x03) /* CAN1 Alternate Function mapping */ +#define GPIO_AF3_I2C4 ((uint8_t)0x03) /* I2C4 Alternate Function mapping */ + +/** + * @brief AF 4 selection + */ +#define GPIO_AF4_I2C1 ((uint8_t)0x04) /* I2C1 Alternate Function mapping */ +#define GPIO_AF4_I2C2 ((uint8_t)0x04) /* I2C2 Alternate Function mapping */ +#define GPIO_AF4_I2C3 ((uint8_t)0x04) /* I2C3 Alternate Function mapping */ +#define GPIO_AF4_I2C4 ((uint8_t)0x04) /* I2C4 Alternate Function mapping */ + +/** + * @brief AF 5 selection + */ +#define GPIO_AF5_SPI1 ((uint8_t)0x05) /* SPI1 Alternate Function mapping */ +#define GPIO_AF5_SPI2 ((uint8_t)0x05) /* SPI2 Alternate Function mapping */ +#define GPIO_AF5_I2C4 ((uint8_t)0x05) /* I2C4 Alternate Function mapping */ + +/** + * @brief AF 6 selection + */ +#define GPIO_AF6_SPI3 ((uint8_t)0x06) /* SPI3 Alternate Function mapping */ +#define GPIO_AF6_DFSDM1 ((uint8_t)0x06) /* DFSDM1 Alternate Function mapping */ +#define GPIO_AF6_COMP1 ((uint8_t)0x06) /* COMP1 Alternate Function mapping */ + +/** + * @brief AF 7 selection + */ +#define GPIO_AF7_USART1 ((uint8_t)0x07) /* USART1 Alternate Function mapping */ +#define GPIO_AF7_USART2 ((uint8_t)0x07) /* USART2 Alternate Function mapping */ +#define GPIO_AF7_USART3 ((uint8_t)0x07) /* USART3 Alternate Function mapping */ + +/** + * @brief AF 8 selection + */ +#define GPIO_AF8_UART4 ((uint8_t)0x08) /* UART4 Alternate Function mapping */ +#define GPIO_AF8_LPUART1 ((uint8_t)0x08) /* LPUART1 Alternate Function mapping */ +#define GPIO_AF8_CAN1 ((uint8_t)0x08) /* CAN1 Alternate Function mapping */ + + +/** + * @brief AF 9 selection + */ +#define GPIO_AF9_CAN1 ((uint8_t)0x09) /* CAN1 Alternate Function mapping */ +#define GPIO_AF9_TSC ((uint8_t)0x09) /* TSC Alternate Function mapping */ + +/** + * @brief AF 10 selection + */ +#if defined(STM32L452xx) || defined(STM32L462xx) +#define GPIO_AF10_USB_FS ((uint8_t)0x0A) /* USB_FS Alternate Function mapping */ +#endif /* STM32L452xx || STM32L462xx */ +#define GPIO_AF10_QUADSPI ((uint8_t)0x0A) /* QUADSPI Alternate Function mapping */ +#define GPIO_AF10_CAN1 ((uint8_t)0x0A) /* CAN1 Alternate Function mapping */ + +/** + * @brief AF 11 selection + */ + +/** + * @brief AF 12 selection + */ +#define GPIO_AF12_COMP1 ((uint8_t)0x0C) /* COMP1 Alternate Function mapping */ +#define GPIO_AF12_COMP2 ((uint8_t)0x0C) /* COMP2 Alternate Function mapping */ +#define GPIO_AF12_SDMMC1 ((uint8_t)0x0C) /* SDMMC1 Alternate Function mapping */ + +/** + * @brief AF 13 selection + */ +#define GPIO_AF13_SAI1 ((uint8_t)0x0D) /* SAI1 Alternate Function mapping */ + +/** + * @brief AF 14 selection + */ +#define GPIO_AF14_TIM2 ((uint8_t)0x0E) /* TIM2 Alternate Function mapping */ +#define GPIO_AF14_TIM15 ((uint8_t)0x0E) /* TIM15 Alternate Function mapping */ +#define GPIO_AF14_TIM16 ((uint8_t)0x0E) /* TIM16 Alternate Function mapping */ +#define GPIO_AF14_TIM17 ((uint8_t)0x0E) /* TIM17 Alternate Function mapping */ +#define GPIO_AF14_LPTIM2 ((uint8_t)0x0E) /* LPTIM2 Alternate Function mapping */ + +/** + * @brief AF 15 selection + */ +#define GPIO_AF15_EVENTOUT ((uint8_t)0x0F) /* EVENTOUT Alternate Function mapping */ + +#define IS_GPIO_AF(AF) ((AF) <= (uint8_t)0x0F) + +#endif /* STM32L451xx || STM32L452xx || STM32L462xx */ + +#if defined(STM32L471xx) || defined(STM32L475xx) || defined(STM32L476xx) || defined(STM32L485xx) || defined(STM32L486xx) +/*--------------STM32L471xx/STM32L475xx/STM32L476xx/STM32L485xx/STM32L486xx---*/ +/** + * @brief AF 0 selection + */ +#define GPIO_AF0_RTC_50Hz ((uint8_t)0x00) /* RTC_50Hz Alternate Function mapping */ +#define GPIO_AF0_MCO ((uint8_t)0x00) /* MCO (MCO1 and MCO2) Alternate Function mapping */ +#define GPIO_AF0_SWJ ((uint8_t)0x00) /* SWJ (SWD and JTAG) Alternate Function mapping */ +#if defined(STM32L476xx) || defined(STM32L486xx) +#define GPIO_AF0_LCDBIAS ((uint8_t)0x00) /* LCDBIAS Alternate Function mapping */ +#endif /* STM32L476xx || STM32L486xx */ +#define GPIO_AF0_TRACE ((uint8_t)0x00) /* TRACE Alternate Function mapping */ + +/** + * @brief AF 1 selection + */ +#define GPIO_AF1_TIM1 ((uint8_t)0x01) /* TIM1 Alternate Function mapping */ +#define GPIO_AF1_TIM2 ((uint8_t)0x01) /* TIM2 Alternate Function mapping */ +#define GPIO_AF1_TIM5 ((uint8_t)0x01) /* TIM5 Alternate Function mapping */ +#define GPIO_AF1_TIM8 ((uint8_t)0x01) /* TIM8 Alternate Function mapping */ +#define GPIO_AF1_LPTIM1 ((uint8_t)0x01) /* LPTIM1 Alternate Function mapping */ +#define GPIO_AF1_IR ((uint8_t)0x01) /* IR Alternate Function mapping */ + +/** + * @brief AF 2 selection + */ +#define GPIO_AF2_TIM1 ((uint8_t)0x02) /* TIM1 Alternate Function mapping */ +#define GPIO_AF2_TIM2 ((uint8_t)0x02) /* TIM2 Alternate Function mapping */ +#define GPIO_AF2_TIM3 ((uint8_t)0x02) /* TIM3 Alternate Function mapping */ +#define GPIO_AF2_TIM4 ((uint8_t)0x02) /* TIM4 Alternate Function mapping */ +#define GPIO_AF2_TIM5 ((uint8_t)0x02) /* TIM5 Alternate Function mapping */ + +/** + * @brief AF 3 selection + */ +#define GPIO_AF3_TIM8 ((uint8_t)0x03) /* TIM8 Alternate Function mapping */ +#define GPIO_AF3_TIM1_COMP2 ((uint8_t)0x03) /* TIM1/COMP2 Break in Alternate Function mapping */ +#define GPIO_AF3_TIM1_COMP1 ((uint8_t)0x03) /* TIM1/COMP1 Break in Alternate Function mapping */ + +/** + * @brief AF 4 selection + */ +#define GPIO_AF4_I2C1 ((uint8_t)0x04) /* I2C1 Alternate Function mapping */ +#define GPIO_AF4_I2C2 ((uint8_t)0x04) /* I2C2 Alternate Function mapping */ +#define GPIO_AF4_I2C3 ((uint8_t)0x04) /* I2C3 Alternate Function mapping */ + +/** + * @brief AF 5 selection + */ +#define GPIO_AF5_SPI1 ((uint8_t)0x05) /* SPI1 Alternate Function mapping */ +#define GPIO_AF5_SPI2 ((uint8_t)0x05) /* SPI2 Alternate Function mapping */ + +/** + * @brief AF 6 selection + */ +#define GPIO_AF6_SPI3 ((uint8_t)0x06) /* SPI3 Alternate Function mapping */ +#define GPIO_AF6_DFSDM1 ((uint8_t)0x06) /* DFSDM1 Alternate Function mapping */ + +/** + * @brief AF 7 selection + */ +#define GPIO_AF7_USART1 ((uint8_t)0x07) /* USART1 Alternate Function mapping */ +#define GPIO_AF7_USART2 ((uint8_t)0x07) /* USART2 Alternate Function mapping */ +#define GPIO_AF7_USART3 ((uint8_t)0x07) /* USART3 Alternate Function mapping */ + +/** + * @brief AF 8 selection + */ +#define GPIO_AF8_UART4 ((uint8_t)0x08) /* UART4 Alternate Function mapping */ +#define GPIO_AF8_UART5 ((uint8_t)0x08) /* UART5 Alternate Function mapping */ +#define GPIO_AF8_LPUART1 ((uint8_t)0x08) /* LPUART1 Alternate Function mapping */ + + +/** + * @brief AF 9 selection + */ +#define GPIO_AF9_CAN1 ((uint8_t)0x09) /* CAN1 Alternate Function mapping */ +#define GPIO_AF9_TSC ((uint8_t)0x09) /* TSC Alternate Function mapping */ + +/** + * @brief AF 10 selection + */ +#if defined(STM32L475xx) || defined(STM32L476xx) || defined(STM32L485xx) || defined(STM32L486xx) +#define GPIO_AF10_OTG_FS ((uint8_t)0x0A) /* OTG_FS Alternate Function mapping */ +#endif /* STM32L475xx || STM32L476xx || STM32L485xx || STM32L486xx */ +#define GPIO_AF10_QUADSPI ((uint8_t)0x0A) /* QUADSPI Alternate Function mapping */ + +#if defined(STM32L476xx) || defined(STM32L486xx) +/** + * @brief AF 11 selection + */ +#define GPIO_AF11_LCD ((uint8_t)0x0B) /* LCD Alternate Function mapping */ +#endif /* STM32L476xx || STM32L486xx */ + +/** + * @brief AF 12 selection + */ +#define GPIO_AF12_FMC ((uint8_t)0x0C) /* FMC Alternate Function mapping */ +#define GPIO_AF12_SWPMI1 ((uint8_t)0x0C) /* SWPMI1 Alternate Function mapping */ +#define GPIO_AF12_COMP1 ((uint8_t)0x0C) /* COMP1 Alternate Function mapping */ +#define GPIO_AF12_COMP2 ((uint8_t)0x0C) /* COMP2 Alternate Function mapping */ +#define GPIO_AF12_SDMMC1 ((uint8_t)0x0C) /* SDMMC1 Alternate Function mapping */ + +/** + * @brief AF 13 selection + */ +#define GPIO_AF13_SAI1 ((uint8_t)0x0D) /* SAI1 Alternate Function mapping */ +#define GPIO_AF13_SAI2 ((uint8_t)0x0D) /* SAI2 Alternate Function mapping */ +#define GPIO_AF13_TIM8_COMP2 ((uint8_t)0x0D) /* TIM8/COMP2 Break in Alternate Function mapping */ +#define GPIO_AF13_TIM8_COMP1 ((uint8_t)0x0D) /* TIM8/COMP1 Break in Alternate Function mapping */ + +/** + * @brief AF 14 selection + */ +#define GPIO_AF14_TIM2 ((uint8_t)0x0E) /* TIM2 Alternate Function mapping */ +#define GPIO_AF14_TIM15 ((uint8_t)0x0E) /* TIM15 Alternate Function mapping */ +#define GPIO_AF14_TIM16 ((uint8_t)0x0E) /* TIM16 Alternate Function mapping */ +#define GPIO_AF14_TIM17 ((uint8_t)0x0E) /* TIM17 Alternate Function mapping */ +#define GPIO_AF14_LPTIM2 ((uint8_t)0x0E) /* LPTIM2 Alternate Function mapping */ +#define GPIO_AF14_TIM8_COMP1 ((uint8_t)0x0E) /* TIM8/COMP1 Break in Alternate Function mapping */ + +/** + * @brief AF 15 selection + */ +#define GPIO_AF15_EVENTOUT ((uint8_t)0x0F) /* EVENTOUT Alternate Function mapping */ + +#define IS_GPIO_AF(AF) ((AF) <= (uint8_t)0x0F) + +#endif /* STM32L471xx || STM32L475xx || STM32L476xx || STM32L485xx || STM32L486xx */ + +#if defined(STM32L496xx) || defined(STM32L4A6xx) +/*--------------------------------STM32L496xx/STM32L4A6xx---------------------*/ +/** + * @brief AF 0 selection + */ +#define GPIO_AF0_RTC_50Hz ((uint8_t)0x00) /* RTC_50Hz Alternate Function mapping */ +#define GPIO_AF0_MCO ((uint8_t)0x00) /* MCO (MCO1 and MCO2) Alternate Function mapping */ +#define GPIO_AF0_SWJ ((uint8_t)0x00) /* SWJ (SWD and JTAG) Alternate Function mapping */ +#define GPIO_AF0_TRACE ((uint8_t)0x00) /* TRACE Alternate Function mapping */ + +/** + * @brief AF 1 selection + */ +#define GPIO_AF1_TIM1 ((uint8_t)0x01) /* TIM1 Alternate Function mapping */ +#define GPIO_AF1_TIM2 ((uint8_t)0x01) /* TIM2 Alternate Function mapping */ +#define GPIO_AF1_TIM5 ((uint8_t)0x01) /* TIM5 Alternate Function mapping */ +#define GPIO_AF1_TIM8 ((uint8_t)0x01) /* TIM8 Alternate Function mapping */ +#define GPIO_AF1_LPTIM1 ((uint8_t)0x01) /* LPTIM1 Alternate Function mapping */ +#define GPIO_AF1_IR ((uint8_t)0x01) /* IR Alternate Function mapping */ + +/** + * @brief AF 2 selection + */ +#define GPIO_AF2_TIM1 ((uint8_t)0x02) /* TIM1 Alternate Function mapping */ +#define GPIO_AF2_TIM2 ((uint8_t)0x02) /* TIM2 Alternate Function mapping */ +#define GPIO_AF2_TIM3 ((uint8_t)0x02) /* TIM3 Alternate Function mapping */ +#define GPIO_AF2_TIM4 ((uint8_t)0x02) /* TIM4 Alternate Function mapping */ +#define GPIO_AF2_TIM5 ((uint8_t)0x02) /* TIM5 Alternate Function mapping */ +#define GPIO_AF2_I2C4 ((uint8_t)0x02) /* I2C4 Alternate Function mapping */ + +/** + * @brief AF 3 selection + */ +#define GPIO_AF3_TIM8 ((uint8_t)0x03) /* TIM8 Alternate Function mapping */ +#define GPIO_AF3_TIM1_COMP2 ((uint8_t)0x03) /* TIM1/COMP2 Break in Alternate Function mapping */ +#define GPIO_AF3_TIM1_COMP1 ((uint8_t)0x03) /* TIM1/COMP1 Break in Alternate Function mapping */ +#define GPIO_AF3_CAN2 ((uint8_t)0x03) /* CAN2 Alternate Function mapping */ +#define GPIO_AF3_I2C4 ((uint8_t)0x03) /* I2C4 Alternate Function mapping */ +#define GPIO_AF3_QUADSPI ((uint8_t)0x03) /* QUADSPI Alternate Function mapping */ +#define GPIO_AF3_SPI2 ((uint8_t)0x03) /* SPI2 Alternate Function mapping */ +#define GPIO_AF3_USART2 ((uint8_t)0x03) /* USART2 Alternate Function mapping */ + +/** + * @brief AF 4 selection + */ +#define GPIO_AF4_I2C1 ((uint8_t)0x04) /* I2C1 Alternate Function mapping */ +#define GPIO_AF4_I2C2 ((uint8_t)0x04) /* I2C2 Alternate Function mapping */ +#define GPIO_AF4_I2C3 ((uint8_t)0x04) /* I2C3 Alternate Function mapping */ +#define GPIO_AF4_I2C4 ((uint8_t)0x04) /* I2C4 Alternate Function mapping */ +#define GPIO_AF4_DCMI ((uint8_t)0x04) /* DCMI Alternate Function mapping */ + +/** + * @brief AF 5 selection + */ +#define GPIO_AF5_SPI1 ((uint8_t)0x05) /* SPI1 Alternate Function mapping */ +#define GPIO_AF5_SPI2 ((uint8_t)0x05) /* SPI2 Alternate Function mapping */ +#define GPIO_AF5_DCMI ((uint8_t)0x05) /* DCMI Alternate Function mapping */ +#define GPIO_AF5_I2C4 ((uint8_t)0x05) /* I2C4 Alternate Function mapping */ +#define GPIO_AF5_QUADSPI ((uint8_t)0x05) /* QUADSPI Alternate Function mapping */ + +/** + * @brief AF 6 selection + */ +#define GPIO_AF6_SPI3 ((uint8_t)0x06) /* SPI3 Alternate Function mapping */ +#define GPIO_AF6_DFSDM1 ((uint8_t)0x06) /* DFSDM1 Alternate Function mapping */ +#define GPIO_AF6_I2C3 ((uint8_t)0x06) /* I2C3 Alternate Function mapping */ + +/** + * @brief AF 7 selection + */ +#define GPIO_AF7_USART1 ((uint8_t)0x07) /* USART1 Alternate Function mapping */ +#define GPIO_AF7_USART2 ((uint8_t)0x07) /* USART2 Alternate Function mapping */ +#define GPIO_AF7_USART3 ((uint8_t)0x07) /* USART3 Alternate Function mapping */ + +/** + * @brief AF 8 selection + */ +#define GPIO_AF8_UART4 ((uint8_t)0x08) /* UART4 Alternate Function mapping */ +#define GPIO_AF8_UART5 ((uint8_t)0x08) /* UART5 Alternate Function mapping */ +#define GPIO_AF8_LPUART1 ((uint8_t)0x08) /* LPUART1 Alternate Function mapping */ +#define GPIO_AF8_CAN2 ((uint8_t)0x08) /* CAN2 Alternate Function mapping */ + +/** + * @brief AF 9 selection + */ +#define GPIO_AF9_CAN1 ((uint8_t)0x09) /* CAN1 Alternate Function mapping */ +#define GPIO_AF9_TSC ((uint8_t)0x09) /* TSC Alternate Function mapping */ + +/** + * @brief AF 10 selection + */ +#define GPIO_AF10_OTG_FS ((uint8_t)0x0A) /* OTG_FS Alternate Function mapping */ +#define GPIO_AF10_QUADSPI ((uint8_t)0x0A) /* QUADSPI Alternate Function mapping */ +#define GPIO_AF10_CAN2 ((uint8_t)0x0A) /* CAN2 Alternate Function mapping */ +#define GPIO_AF10_DCMI ((uint8_t)0x0A) /* DCMI Alternate Function mapping */ + +/** + * @brief AF 11 selection + */ +#define GPIO_AF11_LCD ((uint8_t)0x0B) /* LCD Alternate Function mapping */ + +/** + * @brief AF 12 selection + */ +#define GPIO_AF12_FMC ((uint8_t)0x0C) /* FMC Alternate Function mapping */ +#define GPIO_AF12_SWPMI1 ((uint8_t)0x0C) /* SWPMI1 Alternate Function mapping */ +#define GPIO_AF12_COMP1 ((uint8_t)0x0C) /* COMP1 Alternate Function mapping */ +#define GPIO_AF12_COMP2 ((uint8_t)0x0C) /* COMP2 Alternate Function mapping */ +#define GPIO_AF12_SDMMC1 ((uint8_t)0x0C) /* SDMMC1 Alternate Function mapping */ +#define GPIO_AF12_TIM1_COMP2 ((uint8_t)0x0C) /* TIM1/COMP2 Break in Alternate Function mapping */ +#define GPIO_AF12_TIM1_COMP1 ((uint8_t)0x0C) /* TIM1/COMP1 Break in Alternate Function mapping */ +#define GPIO_AF12_TIM8_COMP2 ((uint8_t)0x0C) /* TIM8/COMP2 Break in Alternate Function mapping */ + +/** + * @brief AF 13 selection + */ +#define GPIO_AF13_SAI1 ((uint8_t)0x0D) /* SAI1 Alternate Function mapping */ +#define GPIO_AF13_SAI2 ((uint8_t)0x0D) /* SAI2 Alternate Function mapping */ +#define GPIO_AF13_TIM8_COMP2 ((uint8_t)0x0D) /* TIM8/COMP2 Break in Alternate Function mapping */ +#define GPIO_AF13_TIM8_COMP1 ((uint8_t)0x0D) /* TIM8/COMP1 Break in Alternate Function mapping */ + +/** + * @brief AF 14 selection + */ +#define GPIO_AF14_TIM2 ((uint8_t)0x0E) /* TIM2 Alternate Function mapping */ +#define GPIO_AF14_TIM15 ((uint8_t)0x0E) /* TIM15 Alternate Function mapping */ +#define GPIO_AF14_TIM16 ((uint8_t)0x0E) /* TIM16 Alternate Function mapping */ +#define GPIO_AF14_TIM17 ((uint8_t)0x0E) /* TIM17 Alternate Function mapping */ +#define GPIO_AF14_LPTIM2 ((uint8_t)0x0E) /* LPTIM2 Alternate Function mapping */ +#define GPIO_AF14_TIM8_COMP1 ((uint8_t)0x0E) /* TIM8/COMP1 Break in Alternate Function mapping */ + +/** + * @brief AF 15 selection + */ +#define GPIO_AF15_EVENTOUT ((uint8_t)0x0F) /* EVENTOUT Alternate Function mapping */ + +#define IS_GPIO_AF(AF) ((AF) <= (uint8_t)0x0F) + +#endif /* STM32L496xx || STM32L4A6xx */ + +#if defined (STM32L4P5xx) || defined (STM32L4Q5xx) +/*---STM32L4P5xx/STM32L4Q5xx--*/ +/** + * @brief AF 0 selection + */ +#define GPIO_AF0_RTC_50Hz ((uint8_t)0x00) /* RTC_50Hz Alternate Function mapping */ +#define GPIO_AF0_MCO ((uint8_t)0x00) /* MCO (MCO1 and MCO2) Alternate Function mapping */ +#define GPIO_AF0_SWJ ((uint8_t)0x00) /* SWJ (SWD and JTAG) Alternate Function mapping */ +#define GPIO_AF0_TRACE ((uint8_t)0x00) /* TRACE Alternate Function mapping */ + +/** + * @brief AF 1 selection + */ +#define GPIO_AF1_TIM1 ((uint8_t)0x01) /* TIM1 Alternate Function mapping */ +#define GPIO_AF1_TIM2 ((uint8_t)0x01) /* TIM2 Alternate Function mapping */ +#define GPIO_AF1_TIM5 ((uint8_t)0x01) /* TIM5 Alternate Function mapping */ +#define GPIO_AF1_TIM8 ((uint8_t)0x01) /* TIM8 Alternate Function mapping */ +#define GPIO_AF1_LPTIM1 ((uint8_t)0x01) /* LPTIM1 Alternate Function mapping */ +#define GPIO_AF1_IR ((uint8_t)0x01) /* IR Alternate Function mapping */ + +/** + * @brief AF 2 selection + */ +#define GPIO_AF2_TIM1 ((uint8_t)0x02) /* TIM1 Alternate Function mapping */ +#define GPIO_AF2_TIM2 ((uint8_t)0x02) /* TIM2 Alternate Function mapping */ +#define GPIO_AF2_TIM3 ((uint8_t)0x02) /* TIM3 Alternate Function mapping */ +#define GPIO_AF2_TIM4 ((uint8_t)0x02) /* TIM4 Alternate Function mapping */ +#define GPIO_AF2_TIM5 ((uint8_t)0x02) /* TIM5 Alternate Function mapping */ + +/** + * @brief AF 3 selection + */ +#define GPIO_AF3_I2C4 ((uint8_t)0x03) /* I2C4 Alternate Function mapping */ +#define GPIO_AF3_OCTOSPIM_P1 ((uint8_t)0x03) /* OctoSPI Manager Port 1 Alternate Function mapping */ +#define GPIO_AF3_SAI1 ((uint8_t)0x03) /* SAI1 Alternate Function mapping */ +#define GPIO_AF3_SPI2 ((uint8_t)0x03) /* SPI2 Alternate Function mapping */ +#define GPIO_AF3_TIM1_COMP1 ((uint8_t)0x03) /* TIM1/COMP1 Break in Alternate Function mapping */ +#define GPIO_AF3_TIM1_COMP2 ((uint8_t)0x03) /* TIM1/COMP2 Break in Alternate Function mapping */ +#define GPIO_AF3_TIM8 ((uint8_t)0x03) /* TIM8 Alternate Function mapping */ +#define GPIO_AF3_TIM8_COMP1 ((uint8_t)0x03) /* TIM8/COMP1 Break in Alternate Function mapping */ +#define GPIO_AF3_TIM8_COMP2 ((uint8_t)0x03) /* TIM8/COMP2 Break in Alternate Function mapping */ +#define GPIO_AF3_USART2 ((uint8_t)0x03) /* USART2 Alternate Function mapping */ + +/** + * @brief AF 4 selection + */ +#define GPIO_AF4_I2C1 ((uint8_t)0x04) /* I2C1 Alternate Function mapping */ +#define GPIO_AF4_I2C2 ((uint8_t)0x04) /* I2C2 Alternate Function mapping */ +#define GPIO_AF4_I2C3 ((uint8_t)0x04) /* I2C3 Alternate Function mapping */ +#define GPIO_AF4_I2C4 ((uint8_t)0x04) /* I2C4 Alternate Function mapping */ +#define GPIO_AF4_DCMI ((uint8_t)0x04) /* DCMI Alternate Function mapping */ +#define GPIO_AF4_PSSI ((uint8_t)0x04) /* PSSI Alternate Function mapping */ + +/** + * @brief AF 5 selection + */ +#define GPIO_AF5_DCMI ((uint8_t)0x05) /* DCMI Alternate Function mapping */ +#define GPIO_AF5_PSSI ((uint8_t)0x05) /* PSSI Alternate Function mapping */ +#define GPIO_AF5_DFSDM1 ((uint8_t)0x05) /* DFSDM1 Alternate Function mapping */ +#define GPIO_AF5_I2C4 ((uint8_t)0x05) /* I2C4 Alternate Function mapping */ +#define GPIO_AF5_OCTOSPIM_P1 ((uint8_t)0x05) /* OctoSPI Manager Port 1 Alternate Function mapping */ +#define GPIO_AF5_OCTOSPIM_P2 ((uint8_t)0x05) /* OctoSPI Manager Port 2 Alternate Function mapping */ +#define GPIO_AF5_SPI1 ((uint8_t)0x05) /* SPI1 Alternate Function mapping */ +#define GPIO_AF5_SPI2 ((uint8_t)0x05) /* SPI2 Alternate Function mapping */ +#define GPIO_AF5_SPI3 ((uint8_t)0x05) /* SPI2 Alternate Function mapping */ + +/** + * @brief AF 6 selection + */ +#define GPIO_AF6_DFSDM1 ((uint8_t)0x06) /* DFSDM1 Alternate Function mapping */ +#define GPIO_AF6_I2C3 ((uint8_t)0x06) /* I2C3 Alternate Function mapping */ +#define GPIO_AF6_OCTOSPIM_P1 ((uint8_t)0x06) /* OctoSPI Manager Port 1 Alternate Function mapping */ +#define GPIO_AF6_OCTOSPIM_P2 ((uint8_t)0x06) /* OctoSPI Manager Port 2 Alternate Function mapping */ +#define GPIO_AF6_SPI3 ((uint8_t)0x06) /* SPI3 Alternate Function mapping */ + +/** + * @brief AF 7 selection + */ +#define GPIO_AF7_USART1 ((uint8_t)0x07) /* USART1 Alternate Function mapping */ +#define GPIO_AF7_USART2 ((uint8_t)0x07) /* USART2 Alternate Function mapping */ +#define GPIO_AF7_USART3 ((uint8_t)0x07) /* USART3 Alternate Function mapping */ +#define GPIO_AF7_SDMMC2 ((uint8_t)0x07) /* SDMMC2 Alternate Function mapping */ + +/** + * @brief AF 8 selection + */ +#define GPIO_AF8_LPUART1 ((uint8_t)0x08) /* LPUART1 Alternate Function mapping */ +#define GPIO_AF8_SDMMC1 ((uint8_t)0x08) /* SDMMC1 Alternate Function mapping */ +#define GPIO_AF8_SDMMC2 ((uint8_t)0x08) /* SDMMC1 Alternate Function mapping */ +#define GPIO_AF8_UART4 ((uint8_t)0x08) /* UART4 Alternate Function mapping */ +#define GPIO_AF8_UART5 ((uint8_t)0x08) /* UART5 Alternate Function mapping */ + +/** + * @brief AF 9 selection + */ +#define GPIO_AF9_CAN1 ((uint8_t)0x09) /* CAN1 Alternate Function mapping */ +#define GPIO_AF9_LTDC ((uint8_t)0x09) /* LTDC Alternate Function mapping */ +#define GPIO_AF9_TSC ((uint8_t)0x09) /* TSC Alternate Function mapping */ + +/** + * @brief AF 10 selection + */ +#define GPIO_AF10_DCMI ((uint8_t)0x0A) /* DCMI Alternate Function mapping */ +#define GPIO_AF10_PSSI ((uint8_t)0x0A) /* PSSI Alternate Function mapping */ +#define GPIO_AF10_OCTOSPIM_P1 ((uint8_t)0x0A) /* OctoSPI Manager Port 1 Alternate Function mapping */ +#define GPIO_AF10_OCTOSPIM_P2 ((uint8_t)0x0A) /* OctoSPI Manager Port 2 Alternate Function mapping */ +#define GPIO_AF10_OTG_FS ((uint8_t)0x0A) /* OTG_FS Alternate Function mapping */ + +/** + * @brief AF 11 selection + */ +#define GPIO_AF11_LTDC ((uint8_t)0x0B) /* LTDC Alternate Function mapping */ +#define GPIO_AF11_SDMMC2 ((uint8_t)0x0B) /* SDMMC2 Alternate Function mapping */ + +/** + * @brief AF 12 selection + */ +#define GPIO_AF12_COMP1 ((uint8_t)0x0C) /* COMP1 Alternate Function mapping */ +#define GPIO_AF12_COMP2 ((uint8_t)0x0C) /* COMP2 Alternate Function mapping */ +#define GPIO_AF12_FMC ((uint8_t)0x0C) /* FMC Alternate Function mapping */ +#define GPIO_AF12_SDMMC1 ((uint8_t)0x0C) /* SDMMC1 Alternate Function mapping */ +#define GPIO_AF12_SDMMC2 ((uint8_t)0x0C) /* SDMMC2 Alternate Function mapping */ +#define GPIO_AF12_TIM1_COMP1 ((uint8_t)0x0C) /* TIM1/COMP1 Break in Alternate Function mapping */ +#define GPIO_AF12_TIM1_COMP2 ((uint8_t)0x0C) /* TIM1/COMP2 Break in Alternate Function mapping */ +#define GPIO_AF12_TIM8_COMP2 ((uint8_t)0x0C) /* TIM8/COMP2 Break in Alternate Function mapping */ + +/** + * @brief AF 13 selection + */ +#define GPIO_AF13_SAI1 ((uint8_t)0x0D) /* SAI1 Alternate Function mapping */ +#define GPIO_AF13_SAI2 ((uint8_t)0x0D) /* SAI2 Alternate Function mapping */ +#define GPIO_AF13_TIM8_COMP1 ((uint8_t)0x0D) /* TIM8/COMP1 Break in Alternate Function mapping */ + +/** + * @brief AF 14 selection + */ +#define GPIO_AF14_TIM2 ((uint8_t)0x0E) /* TIM2 Alternate Function mapping */ +#define GPIO_AF14_TIM15 ((uint8_t)0x0E) /* TIM15 Alternate Function mapping */ +#define GPIO_AF14_TIM16 ((uint8_t)0x0E) /* TIM16 Alternate Function mapping */ +#define GPIO_AF14_TIM17 ((uint8_t)0x0E) /* TIM17 Alternate Function mapping */ +#define GPIO_AF14_LPTIM2 ((uint8_t)0x0E) /* LPTIM2 Alternate Function mapping */ +#define GPIO_AF14_TIM8_COMP2 ((uint8_t)0x0E) /* TIM8/COMP2 Break in Alternate Function mapping */ + +/** + * @brief AF 15 selection + */ +#define GPIO_AF15_EVENTOUT ((uint8_t)0x0F) /* EVENTOUT Alternate Function mapping */ + +#define IS_GPIO_AF(AF) ((AF) <= (uint8_t)0x0F) + +#endif /* STM32L4P5xx || STM32L4Q5xx */ + +#if defined (STM32L4R5xx) || defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined (STM32L4S9xx) +/*---STM32L4R5xx/STM32L4R7xx/STM32L4R9xx/STM32L4S5xx/STM32L4S7xx/STM32L4S9xx--*/ +/** + * @brief AF 0 selection + */ +#define GPIO_AF0_RTC_50Hz ((uint8_t)0x00) /* RTC_50Hz Alternate Function mapping */ +#define GPIO_AF0_MCO ((uint8_t)0x00) /* MCO (MCO1 and MCO2) Alternate Function mapping */ +#define GPIO_AF0_SWJ ((uint8_t)0x00) /* SWJ (SWD and JTAG) Alternate Function mapping */ +#define GPIO_AF0_TRACE ((uint8_t)0x00) /* TRACE Alternate Function mapping */ + +/** + * @brief AF 1 selection + */ +#define GPIO_AF1_TIM1 ((uint8_t)0x01) /* TIM1 Alternate Function mapping */ +#define GPIO_AF1_TIM2 ((uint8_t)0x01) /* TIM2 Alternate Function mapping */ +#define GPIO_AF1_TIM5 ((uint8_t)0x01) /* TIM5 Alternate Function mapping */ +#define GPIO_AF1_TIM8 ((uint8_t)0x01) /* TIM8 Alternate Function mapping */ +#define GPIO_AF1_LPTIM1 ((uint8_t)0x01) /* LPTIM1 Alternate Function mapping */ +#define GPIO_AF1_IR ((uint8_t)0x01) /* IR Alternate Function mapping */ + +/** + * @brief AF 2 selection + */ +#define GPIO_AF2_TIM1 ((uint8_t)0x02) /* TIM1 Alternate Function mapping */ +#define GPIO_AF2_TIM2 ((uint8_t)0x02) /* TIM2 Alternate Function mapping */ +#define GPIO_AF2_TIM3 ((uint8_t)0x02) /* TIM3 Alternate Function mapping */ +#define GPIO_AF2_TIM4 ((uint8_t)0x02) /* TIM4 Alternate Function mapping */ +#define GPIO_AF2_TIM5 ((uint8_t)0x02) /* TIM5 Alternate Function mapping */ + +/** + * @brief AF 3 selection + */ +#define GPIO_AF3_I2C4 ((uint8_t)0x03) /* I2C4 Alternate Function mapping */ +#define GPIO_AF3_OCTOSPIM_P1 ((uint8_t)0x03) /* OctoSPI Manager Port 1 Alternate Function mapping */ +#define GPIO_AF3_SAI1 ((uint8_t)0x03) /* SAI1 Alternate Function mapping */ +#define GPIO_AF3_SPI2 ((uint8_t)0x03) /* SPI2 Alternate Function mapping */ +#define GPIO_AF3_TIM1_COMP1 ((uint8_t)0x03) /* TIM1/COMP1 Break in Alternate Function mapping */ +#define GPIO_AF3_TIM1_COMP2 ((uint8_t)0x03) /* TIM1/COMP2 Break in Alternate Function mapping */ +#define GPIO_AF3_TIM8 ((uint8_t)0x03) /* TIM8 Alternate Function mapping */ +#define GPIO_AF3_TIM8_COMP1 ((uint8_t)0x03) /* TIM8/COMP1 Break in Alternate Function mapping */ +#define GPIO_AF3_TIM8_COMP2 ((uint8_t)0x03) /* TIM8/COMP2 Break in Alternate Function mapping */ +#define GPIO_AF3_USART2 ((uint8_t)0x03) /* USART2 Alternate Function mapping */ + +/** + * @brief AF 4 selection + */ +#define GPIO_AF4_I2C1 ((uint8_t)0x04) /* I2C1 Alternate Function mapping */ +#define GPIO_AF4_I2C2 ((uint8_t)0x04) /* I2C2 Alternate Function mapping */ +#define GPIO_AF4_I2C3 ((uint8_t)0x04) /* I2C3 Alternate Function mapping */ +#define GPIO_AF4_I2C4 ((uint8_t)0x04) /* I2C4 Alternate Function mapping */ +#define GPIO_AF4_DCMI ((uint8_t)0x04) /* DCMI Alternate Function mapping */ + +/** + * @brief AF 5 selection + */ +#define GPIO_AF5_DCMI ((uint8_t)0x05) /* DCMI Alternate Function mapping */ +#define GPIO_AF5_DFSDM1 ((uint8_t)0x05) /* DFSDM1 Alternate Function mapping */ +#define GPIO_AF5_I2C4 ((uint8_t)0x05) /* I2C4 Alternate Function mapping */ +#define GPIO_AF5_OCTOSPIM_P1 ((uint8_t)0x05) /* OctoSPI Manager Port 1 Alternate Function mapping */ +#define GPIO_AF5_OCTOSPIM_P2 ((uint8_t)0x05) /* OctoSPI Manager Port 2 Alternate Function mapping */ +#define GPIO_AF5_SPI1 ((uint8_t)0x05) /* SPI1 Alternate Function mapping */ +#define GPIO_AF5_SPI2 ((uint8_t)0x05) /* SPI2 Alternate Function mapping */ +#define GPIO_AF5_SPI3 ((uint8_t)0x05) /* SPI2 Alternate Function mapping */ + +/** + * @brief AF 6 selection + */ +#define GPIO_AF6_DFSDM1 ((uint8_t)0x06) /* DFSDM1 Alternate Function mapping */ +#define GPIO_AF6_I2C3 ((uint8_t)0x06) /* I2C3 Alternate Function mapping */ +#define GPIO_AF6_SPI3 ((uint8_t)0x06) /* SPI3 Alternate Function mapping */ + +/** + * @brief AF 7 selection + */ +#define GPIO_AF7_USART1 ((uint8_t)0x07) /* USART1 Alternate Function mapping */ +#define GPIO_AF7_USART2 ((uint8_t)0x07) /* USART2 Alternate Function mapping */ +#define GPIO_AF7_USART3 ((uint8_t)0x07) /* USART3 Alternate Function mapping */ + +/** + * @brief AF 8 selection + */ +#define GPIO_AF8_LPUART1 ((uint8_t)0x08) /* LPUART1 Alternate Function mapping */ +#define GPIO_AF8_SDMMC1 ((uint8_t)0x08) /* SDMMC1 Alternate Function mapping */ +#define GPIO_AF8_UART4 ((uint8_t)0x08) /* UART4 Alternate Function mapping */ +#define GPIO_AF8_UART5 ((uint8_t)0x08) /* UART5 Alternate Function mapping */ + +/** + * @brief AF 9 selection + */ +#define GPIO_AF9_CAN1 ((uint8_t)0x09) /* CAN1 Alternate Function mapping */ +#define GPIO_AF9_LTDC ((uint8_t)0x09) /* LTDC Alternate Function mapping */ +#define GPIO_AF9_TSC ((uint8_t)0x09) /* TSC Alternate Function mapping */ + +/** + * @brief AF 10 selection + */ +#define GPIO_AF10_DCMI ((uint8_t)0x0A) /* DCMI Alternate Function mapping */ +#define GPIO_AF10_OCTOSPIM_P1 ((uint8_t)0x0A) /* OctoSPI Manager Port 1 Alternate Function mapping */ +#define GPIO_AF10_OCTOSPIM_P2 ((uint8_t)0x0A) /* OctoSPI Manager Port 2 Alternate Function mapping */ +#define GPIO_AF10_OTG_FS ((uint8_t)0x0A) /* OTG_FS Alternate Function mapping */ + +/** + * @brief AF 11 selection + */ +#define GPIO_AF11_DSI ((uint8_t)0x0B) /* DSI Alternate Function mapping */ +#define GPIO_AF11_LTDC ((uint8_t)0x0B) /* LTDC Alternate Function mapping */ + +/** + * @brief AF 12 selection + */ +#define GPIO_AF12_COMP1 ((uint8_t)0x0C) /* COMP1 Alternate Function mapping */ +#define GPIO_AF12_COMP2 ((uint8_t)0x0C) /* COMP2 Alternate Function mapping */ +#define GPIO_AF12_DSI ((uint8_t)0x0C) /* DSI Alternate Function mapping */ +#define GPIO_AF12_FMC ((uint8_t)0x0C) /* FMC Alternate Function mapping */ +#define GPIO_AF12_SDMMC1 ((uint8_t)0x0C) /* SDMMC1 Alternate Function mapping */ +#define GPIO_AF12_TIM1_COMP1 ((uint8_t)0x0C) /* TIM1/COMP1 Break in Alternate Function mapping */ +#define GPIO_AF12_TIM1_COMP2 ((uint8_t)0x0C) /* TIM1/COMP2 Break in Alternate Function mapping */ +#define GPIO_AF12_TIM8_COMP2 ((uint8_t)0x0C) /* TIM8/COMP2 Break in Alternate Function mapping */ + +/** + * @brief AF 13 selection + */ +#define GPIO_AF13_SAI1 ((uint8_t)0x0D) /* SAI1 Alternate Function mapping */ +#define GPIO_AF13_SAI2 ((uint8_t)0x0D) /* SAI2 Alternate Function mapping */ +#define GPIO_AF13_TIM8_COMP1 ((uint8_t)0x0D) /* TIM8/COMP1 Break in Alternate Function mapping */ + +/** + * @brief AF 14 selection + */ +#define GPIO_AF14_TIM2 ((uint8_t)0x0E) /* TIM2 Alternate Function mapping */ +#define GPIO_AF14_TIM15 ((uint8_t)0x0E) /* TIM15 Alternate Function mapping */ +#define GPIO_AF14_TIM16 ((uint8_t)0x0E) /* TIM16 Alternate Function mapping */ +#define GPIO_AF14_TIM17 ((uint8_t)0x0E) /* TIM17 Alternate Function mapping */ +#define GPIO_AF14_LPTIM2 ((uint8_t)0x0E) /* LPTIM2 Alternate Function mapping */ +#define GPIO_AF14_TIM8_COMP2 ((uint8_t)0x0E) /* TIM8/COMP2 Break in Alternate Function mapping */ + +/** + * @brief AF 15 selection + */ +#define GPIO_AF15_EVENTOUT ((uint8_t)0x0F) /* EVENTOUT Alternate Function mapping */ + +#define IS_GPIO_AF(AF) ((AF) <= (uint8_t)0x0F) + +#endif /* STM32L4R5xx || STM32L4R7xx || STM32L4R9xx || STM32L4S5xx || STM32L4S7xx || STM32L4S9xx */ + +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup GPIOEx_Exported_Macros GPIOEx Exported Macros + * @{ + */ + +/** @defgroup GPIOEx_Get_Port_Index GPIOEx_Get Port Index +* @{ + */ +#if defined(STM32L412xx) || defined(STM32L422xx) + +#define GPIO_GET_INDEX(__GPIOx__) (((__GPIOx__) == (GPIOA))? 0uL :\ + ((__GPIOx__) == (GPIOB))? 1uL :\ + ((__GPIOx__) == (GPIOC))? 2uL :\ + ((__GPIOx__) == (GPIOD))? 3uL : 7uL) + +#endif /* STM32L412xx || STM32L422xx */ + +#if defined(STM32L431xx) || defined(STM32L433xx) || defined(STM32L443xx) + +#define GPIO_GET_INDEX(__GPIOx__) (((__GPIOx__) == (GPIOA))? 0uL :\ + ((__GPIOx__) == (GPIOB))? 1uL :\ + ((__GPIOx__) == (GPIOC))? 2uL :\ + ((__GPIOx__) == (GPIOD))? 3uL :\ + ((__GPIOx__) == (GPIOE))? 4uL : 7uL) + +#endif /* STM32L431xx || STM32L433xx || STM32L443xx */ + +#if defined(STM32L432xx) || defined(STM32L442xx) + +#define GPIO_GET_INDEX(__GPIOx__) (((__GPIOx__) == (GPIOA))? 0uL :\ + ((__GPIOx__) == (GPIOB))? 1uL :\ + ((__GPIOx__) == (GPIOC))? 2uL : 7uL) + +#endif /* STM32L432xx || STM32L442xx */ + +#if defined(STM32L451xx) || defined(STM32L452xx) || defined(STM32L462xx) + +#define GPIO_GET_INDEX(__GPIOx__) (((__GPIOx__) == (GPIOA))? 0uL :\ + ((__GPIOx__) == (GPIOB))? 1uL :\ + ((__GPIOx__) == (GPIOC))? 2uL :\ + ((__GPIOx__) == (GPIOD))? 3uL :\ + ((__GPIOx__) == (GPIOE))? 4uL : 7uL) + +#endif /* STM32L451xx || STM32L452xx || STM32L462xx */ + +#if defined(STM32L471xx) || defined(STM32L475xx) || defined(STM32L476xx) || defined(STM32L485xx) || defined(STM32L486xx) + +#define GPIO_GET_INDEX(__GPIOx__) (((__GPIOx__) == (GPIOA))? 0uL :\ + ((__GPIOx__) == (GPIOB))? 1uL :\ + ((__GPIOx__) == (GPIOC))? 2uL :\ + ((__GPIOx__) == (GPIOD))? 3uL :\ + ((__GPIOx__) == (GPIOE))? 4uL :\ + ((__GPIOx__) == (GPIOF))? 5uL :\ + ((__GPIOx__) == (GPIOG))? 6uL : 7uL) + +#endif /* STM32L471xx || STM32L475xx || STM32L476xx || STM32L485xx || STM32L486xx */ + +#if defined(STM32L496xx) || defined(STM32L4A6xx) + +#define GPIO_GET_INDEX(__GPIOx__) (((__GPIOx__) == (GPIOA))? 0uL :\ + ((__GPIOx__) == (GPIOB))? 1uL :\ + ((__GPIOx__) == (GPIOC))? 2uL :\ + ((__GPIOx__) == (GPIOD))? 3uL :\ + ((__GPIOx__) == (GPIOE))? 4uL :\ + ((__GPIOx__) == (GPIOF))? 5uL :\ + ((__GPIOx__) == (GPIOG))? 6uL :\ + ((__GPIOx__) == (GPIOH))? 7uL : 8uL) + +#endif /* STM32L496xx || STM32L4A6xx */ + +#if defined (STM32L4P5xx) || defined (STM32L4Q5xx) || defined (STM32L4R5xx) || defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined (STM32L4S9xx) + +#define GPIO_GET_INDEX(__GPIOx__) (((__GPIOx__) == (GPIOA))? 0uL :\ + ((__GPIOx__) == (GPIOB))? 1uL :\ + ((__GPIOx__) == (GPIOC))? 2uL :\ + ((__GPIOx__) == (GPIOD))? 3uL :\ + ((__GPIOx__) == (GPIOE))? 4uL :\ + ((__GPIOx__) == (GPIOF))? 5uL :\ + ((__GPIOx__) == (GPIOG))? 6uL :\ + ((__GPIOx__) == (GPIOH))? 7uL : 8uL) + +#endif /* STM32L4P5xx || STM32L4Q5xx || STM32L4R5xx || STM32L4R7xx || STM32L4R9xx || STM32L4S5xx || STM32L4S7xx || STM32L4S9xx */ + +/** + * @} + */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32L4xx_HAL_GPIO_EX_H */ + diff --git a/CablePositioning_IAP_V1.0/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_i2c.h b/CablePositioning_IAP_V1.0/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_i2c.h index f54b907..a4671ee 100644 --- a/CablePositioning_IAP_V1.0/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_i2c.h +++ b/CablePositioning_IAP_V1.0/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_i2c.h @@ -1,839 +1,838 @@ -/** - ****************************************************************************** - * @file stm32l4xx_hal_i2c.h - * @author MCD Application Team - * @brief Header file of I2C HAL module. - ****************************************************************************** - * @attention - * - * Copyright (c) 2017 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef STM32L4xx_HAL_I2C_H -#define STM32L4xx_HAL_I2C_H - -#ifdef __cplusplus -extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32l4xx_hal_def.h" - -/** @addtogroup STM32L4xx_HAL_Driver - * @{ - */ - -/** @addtogroup I2C - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ -/** @defgroup I2C_Exported_Types I2C Exported Types - * @{ - */ - -/** @defgroup I2C_Configuration_Structure_definition I2C Configuration Structure definition - * @brief I2C Configuration Structure definition - * @{ - */ -typedef struct -{ - uint32_t Timing; /*!< Specifies the I2C_TIMINGR_register value. - This parameter calculated by referring to I2C initialization section - in Reference manual */ - - uint32_t OwnAddress1; /*!< Specifies the first device own address. - This parameter can be a 7-bit or 10-bit address. */ - - uint32_t AddressingMode; /*!< Specifies if 7-bit or 10-bit addressing mode is selected. - This parameter can be a value of @ref I2C_ADDRESSING_MODE */ - - uint32_t DualAddressMode; /*!< Specifies if dual addressing mode is selected. - This parameter can be a value of @ref I2C_DUAL_ADDRESSING_MODE */ - - uint32_t OwnAddress2; /*!< Specifies the second device own address if dual addressing mode is selected - This parameter can be a 7-bit address. */ - - uint32_t OwnAddress2Masks; /*!< Specifies the acknowledge mask address second device own address if dual addressing - mode is selected. - This parameter can be a value of @ref I2C_OWN_ADDRESS2_MASKS */ - - uint32_t GeneralCallMode; /*!< Specifies if general call mode is selected. - This parameter can be a value of @ref I2C_GENERAL_CALL_ADDRESSING_MODE */ - - uint32_t NoStretchMode; /*!< Specifies if nostretch mode is selected. - This parameter can be a value of @ref I2C_NOSTRETCH_MODE */ - -} I2C_InitTypeDef; - -/** - * @} - */ - -/** @defgroup HAL_state_structure_definition HAL state structure definition - * @brief HAL State structure definition - * @note HAL I2C State value coding follow below described bitmap :\n - * b7-b6 Error information\n - * 00 : No Error\n - * 01 : Abort (Abort user request on going)\n - * 10 : Timeout\n - * 11 : Error\n - * b5 Peripheral initialization status\n - * 0 : Reset (peripheral not initialized)\n - * 1 : Init done (peripheral initialized and ready to use. HAL I2C Init function called)\n - * b4 (not used)\n - * x : Should be set to 0\n - * b3\n - * 0 : Ready or Busy (No Listen mode ongoing)\n - * 1 : Listen (peripheral in Address Listen Mode)\n - * b2 Intrinsic process state\n - * 0 : Ready\n - * 1 : Busy (peripheral busy with some configuration or internal operations)\n - * b1 Rx state\n - * 0 : Ready (no Rx operation ongoing)\n - * 1 : Busy (Rx operation ongoing)\n - * b0 Tx state\n - * 0 : Ready (no Tx operation ongoing)\n - * 1 : Busy (Tx operation ongoing) - * @{ - */ -typedef enum -{ - HAL_I2C_STATE_RESET = 0x00U, /*!< Peripheral is not yet Initialized */ - HAL_I2C_STATE_READY = 0x20U, /*!< Peripheral Initialized and ready for use */ - HAL_I2C_STATE_BUSY = 0x24U, /*!< An internal process is ongoing */ - HAL_I2C_STATE_BUSY_TX = 0x21U, /*!< Data Transmission process is ongoing */ - HAL_I2C_STATE_BUSY_RX = 0x22U, /*!< Data Reception process is ongoing */ - HAL_I2C_STATE_LISTEN = 0x28U, /*!< Address Listen Mode is ongoing */ - HAL_I2C_STATE_BUSY_TX_LISTEN = 0x29U, /*!< Address Listen Mode and Data Transmission - process is ongoing */ - HAL_I2C_STATE_BUSY_RX_LISTEN = 0x2AU, /*!< Address Listen Mode and Data Reception - process is ongoing */ - HAL_I2C_STATE_ABORT = 0x60U, /*!< Abort user request ongoing */ - HAL_I2C_STATE_TIMEOUT = 0xA0U, /*!< Timeout state */ - HAL_I2C_STATE_ERROR = 0xE0U /*!< Error */ - -} HAL_I2C_StateTypeDef; - -/** - * @} - */ - -/** @defgroup HAL_mode_structure_definition HAL mode structure definition - * @brief HAL Mode structure definition - * @note HAL I2C Mode value coding follow below described bitmap :\n - * b7 (not used)\n - * x : Should be set to 0\n - * b6\n - * 0 : None\n - * 1 : Memory (HAL I2C communication is in Memory Mode)\n - * b5\n - * 0 : None\n - * 1 : Slave (HAL I2C communication is in Slave Mode)\n - * b4\n - * 0 : None\n - * 1 : Master (HAL I2C communication is in Master Mode)\n - * b3-b2-b1-b0 (not used)\n - * xxxx : Should be set to 0000 - * @{ - */ -typedef enum -{ - HAL_I2C_MODE_NONE = 0x00U, /*!< No I2C communication on going */ - HAL_I2C_MODE_MASTER = 0x10U, /*!< I2C communication is in Master Mode */ - HAL_I2C_MODE_SLAVE = 0x20U, /*!< I2C communication is in Slave Mode */ - HAL_I2C_MODE_MEM = 0x40U /*!< I2C communication is in Memory Mode */ - -} HAL_I2C_ModeTypeDef; - -/** - * @} - */ - -/** @defgroup I2C_Error_Code_definition I2C Error Code definition - * @brief I2C Error Code definition - * @{ - */ -#define HAL_I2C_ERROR_NONE (0x00000000U) /*!< No error */ -#define HAL_I2C_ERROR_BERR (0x00000001U) /*!< BERR error */ -#define HAL_I2C_ERROR_ARLO (0x00000002U) /*!< ARLO error */ -#define HAL_I2C_ERROR_AF (0x00000004U) /*!< ACKF error */ -#define HAL_I2C_ERROR_OVR (0x00000008U) /*!< OVR error */ -#define HAL_I2C_ERROR_DMA (0x00000010U) /*!< DMA transfer error */ -#define HAL_I2C_ERROR_TIMEOUT (0x00000020U) /*!< Timeout error */ -#define HAL_I2C_ERROR_SIZE (0x00000040U) /*!< Size Management error */ -#define HAL_I2C_ERROR_DMA_PARAM (0x00000080U) /*!< DMA Parameter Error */ -#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) -#define HAL_I2C_ERROR_INVALID_CALLBACK (0x00000100U) /*!< Invalid Callback error */ -#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ -#define HAL_I2C_ERROR_INVALID_PARAM (0x00000200U) /*!< Invalid Parameters error */ -/** - * @} - */ - -/** @defgroup I2C_handle_Structure_definition I2C handle Structure definition - * @brief I2C handle Structure definition - * @{ - */ -typedef struct __I2C_HandleTypeDef -{ - I2C_TypeDef *Instance; /*!< I2C registers base address */ - - I2C_InitTypeDef Init; /*!< I2C communication parameters */ - - uint8_t *pBuffPtr; /*!< Pointer to I2C transfer buffer */ - - uint16_t XferSize; /*!< I2C transfer size */ - - __IO uint16_t XferCount; /*!< I2C transfer counter */ - - __IO uint32_t XferOptions; /*!< I2C sequantial transfer options, this parameter can - be a value of @ref I2C_XFEROPTIONS */ - - __IO uint32_t PreviousState; /*!< I2C communication Previous state */ - - HAL_StatusTypeDef(*XferISR)(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, uint32_t ITSources); - /*!< I2C transfer IRQ handler function pointer */ - - DMA_HandleTypeDef *hdmatx; /*!< I2C Tx DMA handle parameters */ - - DMA_HandleTypeDef *hdmarx; /*!< I2C Rx DMA handle parameters */ - - HAL_LockTypeDef Lock; /*!< I2C locking object */ - - __IO HAL_I2C_StateTypeDef State; /*!< I2C communication state */ - - __IO HAL_I2C_ModeTypeDef Mode; /*!< I2C communication mode */ - - __IO uint32_t ErrorCode; /*!< I2C Error code */ - - __IO uint32_t AddrEventCount; /*!< I2C Address Event counter */ - - __IO uint32_t Devaddress; /*!< I2C Target device address */ - - __IO uint32_t Memaddress; /*!< I2C Target memory address */ - -#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) - void (* MasterTxCpltCallback)(struct __I2C_HandleTypeDef *hi2c); - /*!< I2C Master Tx Transfer completed callback */ - void (* MasterRxCpltCallback)(struct __I2C_HandleTypeDef *hi2c); - /*!< I2C Master Rx Transfer completed callback */ - void (* SlaveTxCpltCallback)(struct __I2C_HandleTypeDef *hi2c); - /*!< I2C Slave Tx Transfer completed callback */ - void (* SlaveRxCpltCallback)(struct __I2C_HandleTypeDef *hi2c); - /*!< I2C Slave Rx Transfer completed callback */ - void (* ListenCpltCallback)(struct __I2C_HandleTypeDef *hi2c); - /*!< I2C Listen Complete callback */ - void (* MemTxCpltCallback)(struct __I2C_HandleTypeDef *hi2c); - /*!< I2C Memory Tx Transfer completed callback */ - void (* MemRxCpltCallback)(struct __I2C_HandleTypeDef *hi2c); - /*!< I2C Memory Rx Transfer completed callback */ - void (* ErrorCallback)(struct __I2C_HandleTypeDef *hi2c); - /*!< I2C Error callback */ - void (* AbortCpltCallback)(struct __I2C_HandleTypeDef *hi2c); - /*!< I2C Abort callback */ - - void (* AddrCallback)(struct __I2C_HandleTypeDef *hi2c, uint8_t TransferDirection, uint16_t AddrMatchCode); - /*!< I2C Slave Address Match callback */ - - void (* MspInitCallback)(struct __I2C_HandleTypeDef *hi2c); - /*!< I2C Msp Init callback */ - void (* MspDeInitCallback)(struct __I2C_HandleTypeDef *hi2c); - /*!< I2C Msp DeInit callback */ - -#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ -} I2C_HandleTypeDef; - -#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) -/** - * @brief HAL I2C Callback ID enumeration definition - */ -typedef enum -{ - HAL_I2C_MASTER_TX_COMPLETE_CB_ID = 0x00U, /*!< I2C Master Tx Transfer completed callback ID */ - HAL_I2C_MASTER_RX_COMPLETE_CB_ID = 0x01U, /*!< I2C Master Rx Transfer completed callback ID */ - HAL_I2C_SLAVE_TX_COMPLETE_CB_ID = 0x02U, /*!< I2C Slave Tx Transfer completed callback ID */ - HAL_I2C_SLAVE_RX_COMPLETE_CB_ID = 0x03U, /*!< I2C Slave Rx Transfer completed callback ID */ - HAL_I2C_LISTEN_COMPLETE_CB_ID = 0x04U, /*!< I2C Listen Complete callback ID */ - HAL_I2C_MEM_TX_COMPLETE_CB_ID = 0x05U, /*!< I2C Memory Tx Transfer callback ID */ - HAL_I2C_MEM_RX_COMPLETE_CB_ID = 0x06U, /*!< I2C Memory Rx Transfer completed callback ID */ - HAL_I2C_ERROR_CB_ID = 0x07U, /*!< I2C Error callback ID */ - HAL_I2C_ABORT_CB_ID = 0x08U, /*!< I2C Abort callback ID */ - - HAL_I2C_MSPINIT_CB_ID = 0x09U, /*!< I2C Msp Init callback ID */ - HAL_I2C_MSPDEINIT_CB_ID = 0x0AU /*!< I2C Msp DeInit callback ID */ - -} HAL_I2C_CallbackIDTypeDef; - -/** - * @brief HAL I2C Callback pointer definition - */ -typedef void (*pI2C_CallbackTypeDef)(I2C_HandleTypeDef *hi2c); -/*!< pointer to an I2C callback function */ -typedef void (*pI2C_AddrCallbackTypeDef)(I2C_HandleTypeDef *hi2c, uint8_t TransferDirection, - uint16_t AddrMatchCode); -/*!< pointer to an I2C Address Match callback function */ - -#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ -/** - * @} - */ - -/** - * @} - */ -/* Exported constants --------------------------------------------------------*/ - -/** @defgroup I2C_Exported_Constants I2C Exported Constants - * @{ - */ - -/** @defgroup I2C_XFEROPTIONS I2C Sequential Transfer Options - * @{ - */ -#define I2C_FIRST_FRAME ((uint32_t)I2C_SOFTEND_MODE) -#define I2C_FIRST_AND_NEXT_FRAME ((uint32_t)(I2C_RELOAD_MODE | I2C_SOFTEND_MODE)) -#define I2C_NEXT_FRAME ((uint32_t)(I2C_RELOAD_MODE | I2C_SOFTEND_MODE)) -#define I2C_FIRST_AND_LAST_FRAME ((uint32_t)I2C_AUTOEND_MODE) -#define I2C_LAST_FRAME ((uint32_t)I2C_AUTOEND_MODE) -#define I2C_LAST_FRAME_NO_STOP ((uint32_t)I2C_SOFTEND_MODE) - -/* List of XferOptions in usage of : - * 1- Restart condition in all use cases (direction change or not) - */ -#define I2C_OTHER_FRAME (0x000000AAU) -#define I2C_OTHER_AND_LAST_FRAME (0x0000AA00U) -/** - * @} - */ - -/** @defgroup I2C_ADDRESSING_MODE I2C Addressing Mode - * @{ - */ -#define I2C_ADDRESSINGMODE_7BIT (0x00000001U) -#define I2C_ADDRESSINGMODE_10BIT (0x00000002U) -/** - * @} - */ - -/** @defgroup I2C_DUAL_ADDRESSING_MODE I2C Dual Addressing Mode - * @{ - */ -#define I2C_DUALADDRESS_DISABLE (0x00000000U) -#define I2C_DUALADDRESS_ENABLE I2C_OAR2_OA2EN -/** - * @} - */ - -/** @defgroup I2C_OWN_ADDRESS2_MASKS I2C Own Address2 Masks - * @{ - */ -#define I2C_OA2_NOMASK ((uint8_t)0x00U) -#define I2C_OA2_MASK01 ((uint8_t)0x01U) -#define I2C_OA2_MASK02 ((uint8_t)0x02U) -#define I2C_OA2_MASK03 ((uint8_t)0x03U) -#define I2C_OA2_MASK04 ((uint8_t)0x04U) -#define I2C_OA2_MASK05 ((uint8_t)0x05U) -#define I2C_OA2_MASK06 ((uint8_t)0x06U) -#define I2C_OA2_MASK07 ((uint8_t)0x07U) -/** - * @} - */ - -/** @defgroup I2C_GENERAL_CALL_ADDRESSING_MODE I2C General Call Addressing Mode - * @{ - */ -#define I2C_GENERALCALL_DISABLE (0x00000000U) -#define I2C_GENERALCALL_ENABLE I2C_CR1_GCEN -/** - * @} - */ - -/** @defgroup I2C_NOSTRETCH_MODE I2C No-Stretch Mode - * @{ - */ -#define I2C_NOSTRETCH_DISABLE (0x00000000U) -#define I2C_NOSTRETCH_ENABLE I2C_CR1_NOSTRETCH -/** - * @} - */ - -/** @defgroup I2C_MEMORY_ADDRESS_SIZE I2C Memory Address Size - * @{ - */ -#define I2C_MEMADD_SIZE_8BIT (0x00000001U) -#define I2C_MEMADD_SIZE_16BIT (0x00000002U) -/** - * @} - */ - -/** @defgroup I2C_XFERDIRECTION I2C Transfer Direction Master Point of View - * @{ - */ -#define I2C_DIRECTION_TRANSMIT (0x00000000U) -#define I2C_DIRECTION_RECEIVE (0x00000001U) -/** - * @} - */ - -/** @defgroup I2C_RELOAD_END_MODE I2C Reload End Mode - * @{ - */ -#define I2C_RELOAD_MODE I2C_CR2_RELOAD -#define I2C_AUTOEND_MODE I2C_CR2_AUTOEND -#define I2C_SOFTEND_MODE (0x00000000U) -/** - * @} - */ - -/** @defgroup I2C_START_STOP_MODE I2C Start or Stop Mode - * @{ - */ -#define I2C_NO_STARTSTOP (0x00000000U) -#define I2C_GENERATE_STOP (uint32_t)(0x80000000U | I2C_CR2_STOP) -#define I2C_GENERATE_START_READ (uint32_t)(0x80000000U | I2C_CR2_START | I2C_CR2_RD_WRN) -#define I2C_GENERATE_START_WRITE (uint32_t)(0x80000000U | I2C_CR2_START) -/** - * @} - */ - -/** @defgroup I2C_Interrupt_configuration_definition I2C Interrupt configuration definition - * @brief I2C Interrupt definition - * Elements values convention: 0xXXXXXXXX - * - XXXXXXXX : Interrupt control mask - * @{ - */ -#define I2C_IT_ERRI I2C_CR1_ERRIE -#define I2C_IT_TCI I2C_CR1_TCIE -#define I2C_IT_STOPI I2C_CR1_STOPIE -#define I2C_IT_NACKI I2C_CR1_NACKIE -#define I2C_IT_ADDRI I2C_CR1_ADDRIE -#define I2C_IT_RXI I2C_CR1_RXIE -#define I2C_IT_TXI I2C_CR1_TXIE -/** - * @} - */ - -/** @defgroup I2C_Flag_definition I2C Flag definition - * @{ - */ -#define I2C_FLAG_TXE I2C_ISR_TXE -#define I2C_FLAG_TXIS I2C_ISR_TXIS -#define I2C_FLAG_RXNE I2C_ISR_RXNE -#define I2C_FLAG_ADDR I2C_ISR_ADDR -#define I2C_FLAG_AF I2C_ISR_NACKF -#define I2C_FLAG_STOPF I2C_ISR_STOPF -#define I2C_FLAG_TC I2C_ISR_TC -#define I2C_FLAG_TCR I2C_ISR_TCR -#define I2C_FLAG_BERR I2C_ISR_BERR -#define I2C_FLAG_ARLO I2C_ISR_ARLO -#define I2C_FLAG_OVR I2C_ISR_OVR -#define I2C_FLAG_PECERR I2C_ISR_PECERR -#define I2C_FLAG_TIMEOUT I2C_ISR_TIMEOUT -#define I2C_FLAG_ALERT I2C_ISR_ALERT -#define I2C_FLAG_BUSY I2C_ISR_BUSY -#define I2C_FLAG_DIR I2C_ISR_DIR -/** - * @} - */ - -/** - * @} - */ - -/* Exported macros -----------------------------------------------------------*/ - -/** @defgroup I2C_Exported_Macros I2C Exported Macros - * @{ - */ - -/** @brief Reset I2C handle state. - * @param __HANDLE__ specifies the I2C Handle. - * @retval None - */ -#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) -#define __HAL_I2C_RESET_HANDLE_STATE(__HANDLE__) do{ \ - (__HANDLE__)->State = HAL_I2C_STATE_RESET; \ - (__HANDLE__)->MspInitCallback = NULL; \ - (__HANDLE__)->MspDeInitCallback = NULL; \ - } while(0) -#else -#define __HAL_I2C_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_I2C_STATE_RESET) -#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ - -/** @brief Enable the specified I2C interrupt. - * @param __HANDLE__ specifies the I2C Handle. - * @param __INTERRUPT__ specifies the interrupt source to enable. - * This parameter can be one of the following values: - * @arg @ref I2C_IT_ERRI Errors interrupt enable - * @arg @ref I2C_IT_TCI Transfer complete interrupt enable - * @arg @ref I2C_IT_STOPI STOP detection interrupt enable - * @arg @ref I2C_IT_NACKI NACK received interrupt enable - * @arg @ref I2C_IT_ADDRI Address match interrupt enable - * @arg @ref I2C_IT_RXI RX interrupt enable - * @arg @ref I2C_IT_TXI TX interrupt enable - * - * @retval None - */ -#define __HAL_I2C_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR1 |= (__INTERRUPT__)) - -/** @brief Disable the specified I2C interrupt. - * @param __HANDLE__ specifies the I2C Handle. - * @param __INTERRUPT__ specifies the interrupt source to disable. - * This parameter can be one of the following values: - * @arg @ref I2C_IT_ERRI Errors interrupt enable - * @arg @ref I2C_IT_TCI Transfer complete interrupt enable - * @arg @ref I2C_IT_STOPI STOP detection interrupt enable - * @arg @ref I2C_IT_NACKI NACK received interrupt enable - * @arg @ref I2C_IT_ADDRI Address match interrupt enable - * @arg @ref I2C_IT_RXI RX interrupt enable - * @arg @ref I2C_IT_TXI TX interrupt enable - * - * @retval None - */ -#define __HAL_I2C_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR1 &= (~(__INTERRUPT__))) - -/** @brief Check whether the specified I2C interrupt source is enabled or not. - * @param __HANDLE__ specifies the I2C Handle. - * @param __INTERRUPT__ specifies the I2C interrupt source to check. - * This parameter can be one of the following values: - * @arg @ref I2C_IT_ERRI Errors interrupt enable - * @arg @ref I2C_IT_TCI Transfer complete interrupt enable - * @arg @ref I2C_IT_STOPI STOP detection interrupt enable - * @arg @ref I2C_IT_NACKI NACK received interrupt enable - * @arg @ref I2C_IT_ADDRI Address match interrupt enable - * @arg @ref I2C_IT_RXI RX interrupt enable - * @arg @ref I2C_IT_TXI TX interrupt enable - * - * @retval The new state of __INTERRUPT__ (SET or RESET). - */ -#define __HAL_I2C_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->CR1 & \ - (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET) - -/** @brief Check whether the specified I2C flag is set or not. - * @param __HANDLE__ specifies the I2C Handle. - * @param __FLAG__ specifies the flag to check. - * This parameter can be one of the following values: - * @arg @ref I2C_FLAG_TXE Transmit data register empty - * @arg @ref I2C_FLAG_TXIS Transmit interrupt status - * @arg @ref I2C_FLAG_RXNE Receive data register not empty - * @arg @ref I2C_FLAG_ADDR Address matched (slave mode) - * @arg @ref I2C_FLAG_AF Acknowledge failure received flag - * @arg @ref I2C_FLAG_STOPF STOP detection flag - * @arg @ref I2C_FLAG_TC Transfer complete (master mode) - * @arg @ref I2C_FLAG_TCR Transfer complete reload - * @arg @ref I2C_FLAG_BERR Bus error - * @arg @ref I2C_FLAG_ARLO Arbitration lost - * @arg @ref I2C_FLAG_OVR Overrun/Underrun - * @arg @ref I2C_FLAG_PECERR PEC error in reception - * @arg @ref I2C_FLAG_TIMEOUT Timeout or Tlow detection flag - * @arg @ref I2C_FLAG_ALERT SMBus alert - * @arg @ref I2C_FLAG_BUSY Bus busy - * @arg @ref I2C_FLAG_DIR Transfer direction (slave mode) - * - * @retval The new state of __FLAG__ (SET or RESET). - */ -#define I2C_FLAG_MASK (0x0001FFFFU) -#define __HAL_I2C_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & \ - (__FLAG__)) == (__FLAG__)) ? SET : RESET) - -/** @brief Clear the I2C pending flags which are cleared by writing 1 in a specific bit. - * @param __HANDLE__ specifies the I2C Handle. - * @param __FLAG__ specifies the flag to clear. - * This parameter can be any combination of the following values: - * @arg @ref I2C_FLAG_TXE Transmit data register empty - * @arg @ref I2C_FLAG_ADDR Address matched (slave mode) - * @arg @ref I2C_FLAG_AF Acknowledge failure received flag - * @arg @ref I2C_FLAG_STOPF STOP detection flag - * @arg @ref I2C_FLAG_BERR Bus error - * @arg @ref I2C_FLAG_ARLO Arbitration lost - * @arg @ref I2C_FLAG_OVR Overrun/Underrun - * @arg @ref I2C_FLAG_PECERR PEC error in reception - * @arg @ref I2C_FLAG_TIMEOUT Timeout or Tlow detection flag - * @arg @ref I2C_FLAG_ALERT SMBus alert - * - * @retval None - */ -#define __HAL_I2C_CLEAR_FLAG(__HANDLE__, __FLAG__) (((__FLAG__) == I2C_FLAG_TXE) ? \ - ((__HANDLE__)->Instance->ISR |= (__FLAG__)) : \ - ((__HANDLE__)->Instance->ICR = (__FLAG__))) - -/** @brief Enable the specified I2C peripheral. - * @param __HANDLE__ specifies the I2C Handle. - * @retval None - */ -#define __HAL_I2C_ENABLE(__HANDLE__) (SET_BIT((__HANDLE__)->Instance->CR1, I2C_CR1_PE)) - -/** @brief Disable the specified I2C peripheral. - * @param __HANDLE__ specifies the I2C Handle. - * @retval None - */ -#define __HAL_I2C_DISABLE(__HANDLE__) (CLEAR_BIT((__HANDLE__)->Instance->CR1, I2C_CR1_PE)) - -/** @brief Generate a Non-Acknowledge I2C peripheral in Slave mode. - * @param __HANDLE__ specifies the I2C Handle. - * @retval None - */ -#define __HAL_I2C_GENERATE_NACK(__HANDLE__) (SET_BIT((__HANDLE__)->Instance->CR2, I2C_CR2_NACK)) -/** - * @} - */ - -/* Include I2C HAL Extended module */ -#include "stm32l4xx_hal_i2c_ex.h" - -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup I2C_Exported_Functions - * @{ - */ - -/** @addtogroup I2C_Exported_Functions_Group1 Initialization and de-initialization functions - * @{ - */ -/* Initialization and de-initialization functions******************************/ -HAL_StatusTypeDef HAL_I2C_Init(I2C_HandleTypeDef *hi2c); -HAL_StatusTypeDef HAL_I2C_DeInit(I2C_HandleTypeDef *hi2c); -void HAL_I2C_MspInit(I2C_HandleTypeDef *hi2c); -void HAL_I2C_MspDeInit(I2C_HandleTypeDef *hi2c); - -/* Callbacks Register/UnRegister functions ***********************************/ -#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) -HAL_StatusTypeDef HAL_I2C_RegisterCallback(I2C_HandleTypeDef *hi2c, HAL_I2C_CallbackIDTypeDef CallbackID, - pI2C_CallbackTypeDef pCallback); -HAL_StatusTypeDef HAL_I2C_UnRegisterCallback(I2C_HandleTypeDef *hi2c, HAL_I2C_CallbackIDTypeDef CallbackID); - -HAL_StatusTypeDef HAL_I2C_RegisterAddrCallback(I2C_HandleTypeDef *hi2c, pI2C_AddrCallbackTypeDef pCallback); -HAL_StatusTypeDef HAL_I2C_UnRegisterAddrCallback(I2C_HandleTypeDef *hi2c); -#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ -/** - * @} - */ - -/** @addtogroup I2C_Exported_Functions_Group2 Input and Output operation functions - * @{ - */ -/* IO operation functions ****************************************************/ -/******* Blocking mode: Polling */ -HAL_StatusTypeDef HAL_I2C_Master_Transmit(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, - uint16_t Size, uint32_t Timeout); -HAL_StatusTypeDef HAL_I2C_Master_Receive(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, - uint16_t Size, uint32_t Timeout); -HAL_StatusTypeDef HAL_I2C_Slave_Transmit(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, - uint32_t Timeout); -HAL_StatusTypeDef HAL_I2C_Slave_Receive(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, - uint32_t Timeout); -HAL_StatusTypeDef HAL_I2C_Mem_Write(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, - uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout); -HAL_StatusTypeDef HAL_I2C_Mem_Read(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, - uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout); -HAL_StatusTypeDef HAL_I2C_IsDeviceReady(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint32_t Trials, - uint32_t Timeout); - -/******* Non-Blocking mode: Interrupt */ -HAL_StatusTypeDef HAL_I2C_Master_Transmit_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, - uint16_t Size); -HAL_StatusTypeDef HAL_I2C_Master_Receive_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, - uint16_t Size); -HAL_StatusTypeDef HAL_I2C_Slave_Transmit_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size); -HAL_StatusTypeDef HAL_I2C_Slave_Receive_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size); -HAL_StatusTypeDef HAL_I2C_Mem_Write_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, - uint16_t MemAddSize, uint8_t *pData, uint16_t Size); -HAL_StatusTypeDef HAL_I2C_Mem_Read_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, - uint16_t MemAddSize, uint8_t *pData, uint16_t Size); - -HAL_StatusTypeDef HAL_I2C_Master_Seq_Transmit_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, - uint16_t Size, uint32_t XferOptions); -HAL_StatusTypeDef HAL_I2C_Master_Seq_Receive_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, - uint16_t Size, uint32_t XferOptions); -HAL_StatusTypeDef HAL_I2C_Slave_Seq_Transmit_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, - uint32_t XferOptions); -HAL_StatusTypeDef HAL_I2C_Slave_Seq_Receive_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, - uint32_t XferOptions); -HAL_StatusTypeDef HAL_I2C_EnableListen_IT(I2C_HandleTypeDef *hi2c); -HAL_StatusTypeDef HAL_I2C_DisableListen_IT(I2C_HandleTypeDef *hi2c); -HAL_StatusTypeDef HAL_I2C_Master_Abort_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress); - -/******* Non-Blocking mode: DMA */ -HAL_StatusTypeDef HAL_I2C_Master_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, - uint16_t Size); -HAL_StatusTypeDef HAL_I2C_Master_Receive_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, - uint16_t Size); -HAL_StatusTypeDef HAL_I2C_Slave_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size); -HAL_StatusTypeDef HAL_I2C_Slave_Receive_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size); -HAL_StatusTypeDef HAL_I2C_Mem_Write_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, - uint16_t MemAddSize, uint8_t *pData, uint16_t Size); -HAL_StatusTypeDef HAL_I2C_Mem_Read_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, - uint16_t MemAddSize, uint8_t *pData, uint16_t Size); - -HAL_StatusTypeDef HAL_I2C_Master_Seq_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, - uint16_t Size, uint32_t XferOptions); -HAL_StatusTypeDef HAL_I2C_Master_Seq_Receive_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, - uint16_t Size, uint32_t XferOptions); -HAL_StatusTypeDef HAL_I2C_Slave_Seq_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, - uint32_t XferOptions); -HAL_StatusTypeDef HAL_I2C_Slave_Seq_Receive_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, - uint32_t XferOptions); -/** - * @} - */ - -/** @addtogroup I2C_IRQ_Handler_and_Callbacks IRQ Handler and Callbacks - * @{ - */ -/******* I2C IRQHandler and Callbacks used in non blocking modes (Interrupt and DMA) */ -void HAL_I2C_EV_IRQHandler(I2C_HandleTypeDef *hi2c); -void HAL_I2C_ER_IRQHandler(I2C_HandleTypeDef *hi2c); -void HAL_I2C_MasterTxCpltCallback(I2C_HandleTypeDef *hi2c); -void HAL_I2C_MasterRxCpltCallback(I2C_HandleTypeDef *hi2c); -void HAL_I2C_SlaveTxCpltCallback(I2C_HandleTypeDef *hi2c); -void HAL_I2C_SlaveRxCpltCallback(I2C_HandleTypeDef *hi2c); -void HAL_I2C_AddrCallback(I2C_HandleTypeDef *hi2c, uint8_t TransferDirection, uint16_t AddrMatchCode); -void HAL_I2C_ListenCpltCallback(I2C_HandleTypeDef *hi2c); -void HAL_I2C_MemTxCpltCallback(I2C_HandleTypeDef *hi2c); -void HAL_I2C_MemRxCpltCallback(I2C_HandleTypeDef *hi2c); -void HAL_I2C_ErrorCallback(I2C_HandleTypeDef *hi2c); -void HAL_I2C_AbortCpltCallback(I2C_HandleTypeDef *hi2c); -/** - * @} - */ - -/** @addtogroup I2C_Exported_Functions_Group3 Peripheral State, Mode and Error functions - * @{ - */ -/* Peripheral State, Mode and Error functions *********************************/ -HAL_I2C_StateTypeDef HAL_I2C_GetState(I2C_HandleTypeDef *hi2c); -HAL_I2C_ModeTypeDef HAL_I2C_GetMode(I2C_HandleTypeDef *hi2c); -uint32_t HAL_I2C_GetError(I2C_HandleTypeDef *hi2c); - -/** - * @} - */ - -/** - * @} - */ - -/* Private constants ---------------------------------------------------------*/ -/** @defgroup I2C_Private_Constants I2C Private Constants - * @{ - */ - -/** - * @} - */ - -/* Private macros ------------------------------------------------------------*/ -/** @defgroup I2C_Private_Macro I2C Private Macros - * @{ - */ - -#define IS_I2C_ADDRESSING_MODE(MODE) (((MODE) == I2C_ADDRESSINGMODE_7BIT) || \ - ((MODE) == I2C_ADDRESSINGMODE_10BIT)) - -#define IS_I2C_DUAL_ADDRESS(ADDRESS) (((ADDRESS) == I2C_DUALADDRESS_DISABLE) || \ - ((ADDRESS) == I2C_DUALADDRESS_ENABLE)) - -#define IS_I2C_OWN_ADDRESS2_MASK(MASK) (((MASK) == I2C_OA2_NOMASK) || \ - ((MASK) == I2C_OA2_MASK01) || \ - ((MASK) == I2C_OA2_MASK02) || \ - ((MASK) == I2C_OA2_MASK03) || \ - ((MASK) == I2C_OA2_MASK04) || \ - ((MASK) == I2C_OA2_MASK05) || \ - ((MASK) == I2C_OA2_MASK06) || \ - ((MASK) == I2C_OA2_MASK07)) - -#define IS_I2C_GENERAL_CALL(CALL) (((CALL) == I2C_GENERALCALL_DISABLE) || \ - ((CALL) == I2C_GENERALCALL_ENABLE)) - -#define IS_I2C_NO_STRETCH(STRETCH) (((STRETCH) == I2C_NOSTRETCH_DISABLE) || \ - ((STRETCH) == I2C_NOSTRETCH_ENABLE)) - -#define IS_I2C_MEMADD_SIZE(SIZE) (((SIZE) == I2C_MEMADD_SIZE_8BIT) || \ - ((SIZE) == I2C_MEMADD_SIZE_16BIT)) - -#define IS_TRANSFER_MODE(MODE) (((MODE) == I2C_RELOAD_MODE) || \ - ((MODE) == I2C_AUTOEND_MODE) || \ - ((MODE) == I2C_SOFTEND_MODE)) - -#define IS_TRANSFER_REQUEST(REQUEST) (((REQUEST) == I2C_GENERATE_STOP) || \ - ((REQUEST) == I2C_GENERATE_START_READ) || \ - ((REQUEST) == I2C_GENERATE_START_WRITE) || \ - ((REQUEST) == I2C_NO_STARTSTOP)) - -#define IS_I2C_TRANSFER_OPTIONS_REQUEST(REQUEST) (((REQUEST) == I2C_FIRST_FRAME) || \ - ((REQUEST) == I2C_FIRST_AND_NEXT_FRAME) || \ - ((REQUEST) == I2C_NEXT_FRAME) || \ - ((REQUEST) == I2C_FIRST_AND_LAST_FRAME) || \ - ((REQUEST) == I2C_LAST_FRAME) || \ - ((REQUEST) == I2C_LAST_FRAME_NO_STOP) || \ - IS_I2C_TRANSFER_OTHER_OPTIONS_REQUEST(REQUEST)) - -#define IS_I2C_TRANSFER_OTHER_OPTIONS_REQUEST(REQUEST) (((REQUEST) == I2C_OTHER_FRAME) || \ - ((REQUEST) == I2C_OTHER_AND_LAST_FRAME)) - -#define I2C_RESET_CR2(__HANDLE__) ((__HANDLE__)->Instance->CR2 &= \ - (uint32_t)~((uint32_t)(I2C_CR2_SADD | I2C_CR2_HEAD10R | \ - I2C_CR2_NBYTES | I2C_CR2_RELOAD | \ - I2C_CR2_RD_WRN))) - -#define I2C_GET_ADDR_MATCH(__HANDLE__) ((uint16_t)(((__HANDLE__)->Instance->ISR & I2C_ISR_ADDCODE) \ - >> 16U)) -#define I2C_GET_DIR(__HANDLE__) ((uint8_t)(((__HANDLE__)->Instance->ISR & I2C_ISR_DIR) \ - >> 16U)) -#define I2C_GET_STOP_MODE(__HANDLE__) ((__HANDLE__)->Instance->CR2 & I2C_CR2_AUTOEND) -#define I2C_GET_OWN_ADDRESS1(__HANDLE__) ((uint16_t)((__HANDLE__)->Instance->OAR1 & I2C_OAR1_OA1)) -#define I2C_GET_OWN_ADDRESS2(__HANDLE__) ((uint16_t)((__HANDLE__)->Instance->OAR2 & I2C_OAR2_OA2)) - -#define IS_I2C_OWN_ADDRESS1(ADDRESS1) ((ADDRESS1) <= 0x000003FFU) -#define IS_I2C_OWN_ADDRESS2(ADDRESS2) ((ADDRESS2) <= (uint16_t)0x00FFU) - -#define I2C_MEM_ADD_MSB(__ADDRESS__) ((uint8_t)((uint16_t)(((uint16_t)((__ADDRESS__) & \ - (uint16_t)(0xFF00U))) >> 8U))) -#define I2C_MEM_ADD_LSB(__ADDRESS__) ((uint8_t)((uint16_t)((__ADDRESS__) & (uint16_t)(0x00FFU)))) - -#define I2C_GENERATE_START(__ADDMODE__,__ADDRESS__) (((__ADDMODE__) == I2C_ADDRESSINGMODE_7BIT) ? \ - (uint32_t)((((uint32_t)(__ADDRESS__) & (I2C_CR2_SADD)) | \ - (I2C_CR2_START) | (I2C_CR2_AUTOEND)) & \ - (~I2C_CR2_RD_WRN)) : \ - (uint32_t)((((uint32_t)(__ADDRESS__) & (I2C_CR2_SADD)) | \ - (I2C_CR2_ADD10) | (I2C_CR2_START)) & \ - (~I2C_CR2_RD_WRN))) - -#define I2C_CHECK_FLAG(__ISR__, __FLAG__) ((((__ISR__) & ((__FLAG__) & I2C_FLAG_MASK)) == \ - ((__FLAG__) & I2C_FLAG_MASK)) ? SET : RESET) -#define I2C_CHECK_IT_SOURCE(__CR1__, __IT__) ((((__CR1__) & (__IT__)) == (__IT__)) ? SET : RESET) -/** - * @} - */ - -/* Private Functions ---------------------------------------------------------*/ -/** @defgroup I2C_Private_Functions I2C Private Functions - * @{ - */ -/* Private functions are defined in stm32l4xx_hal_i2c.c file */ -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - - -#endif /* STM32L4xx_HAL_I2C_H */ +/** + ****************************************************************************** + * @file stm32l4xx_hal_i2c.h + * @author MCD Application Team + * @brief Header file of I2C HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32L4xx_HAL_I2C_H +#define STM32L4xx_HAL_I2C_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l4xx_hal_def.h" + +/** @addtogroup STM32L4xx_HAL_Driver + * @{ + */ + +/** @addtogroup I2C + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup I2C_Exported_Types I2C Exported Types + * @{ + */ + +/** @defgroup I2C_Configuration_Structure_definition I2C Configuration Structure definition + * @brief I2C Configuration Structure definition + * @{ + */ +typedef struct +{ + uint32_t Timing; /*!< Specifies the I2C_TIMINGR_register value. + This parameter calculated by referring to I2C initialization section + in Reference manual */ + + uint32_t OwnAddress1; /*!< Specifies the first device own address. + This parameter can be a 7-bit or 10-bit address. */ + + uint32_t AddressingMode; /*!< Specifies if 7-bit or 10-bit addressing mode is selected. + This parameter can be a value of @ref I2C_ADDRESSING_MODE */ + + uint32_t DualAddressMode; /*!< Specifies if dual addressing mode is selected. + This parameter can be a value of @ref I2C_DUAL_ADDRESSING_MODE */ + + uint32_t OwnAddress2; /*!< Specifies the second device own address if dual addressing mode is selected + This parameter can be a 7-bit address. */ + + uint32_t OwnAddress2Masks; /*!< Specifies the acknowledge mask address second device own address if dual addressing + mode is selected. + This parameter can be a value of @ref I2C_OWN_ADDRESS2_MASKS */ + + uint32_t GeneralCallMode; /*!< Specifies if general call mode is selected. + This parameter can be a value of @ref I2C_GENERAL_CALL_ADDRESSING_MODE */ + + uint32_t NoStretchMode; /*!< Specifies if nostretch mode is selected. + This parameter can be a value of @ref I2C_NOSTRETCH_MODE */ + +} I2C_InitTypeDef; + +/** + * @} + */ + +/** @defgroup HAL_state_structure_definition HAL state structure definition + * @brief HAL State structure definition + * @note HAL I2C State value coding follow below described bitmap :\n + * b7-b6 Error information\n + * 00 : No Error\n + * 01 : Abort (Abort user request on going)\n + * 10 : Timeout\n + * 11 : Error\n + * b5 Peripheral initialization status\n + * 0 : Reset (peripheral not initialized)\n + * 1 : Init done (peripheral initialized and ready to use. HAL I2C Init function called)\n + * b4 (not used)\n + * x : Should be set to 0\n + * b3\n + * 0 : Ready or Busy (No Listen mode ongoing)\n + * 1 : Listen (peripheral in Address Listen Mode)\n + * b2 Intrinsic process state\n + * 0 : Ready\n + * 1 : Busy (peripheral busy with some configuration or internal operations)\n + * b1 Rx state\n + * 0 : Ready (no Rx operation ongoing)\n + * 1 : Busy (Rx operation ongoing)\n + * b0 Tx state\n + * 0 : Ready (no Tx operation ongoing)\n + * 1 : Busy (Tx operation ongoing) + * @{ + */ +typedef enum +{ + HAL_I2C_STATE_RESET = 0x00U, /*!< Peripheral is not yet Initialized */ + HAL_I2C_STATE_READY = 0x20U, /*!< Peripheral Initialized and ready for use */ + HAL_I2C_STATE_BUSY = 0x24U, /*!< An internal process is ongoing */ + HAL_I2C_STATE_BUSY_TX = 0x21U, /*!< Data Transmission process is ongoing */ + HAL_I2C_STATE_BUSY_RX = 0x22U, /*!< Data Reception process is ongoing */ + HAL_I2C_STATE_LISTEN = 0x28U, /*!< Address Listen Mode is ongoing */ + HAL_I2C_STATE_BUSY_TX_LISTEN = 0x29U, /*!< Address Listen Mode and Data Transmission + process is ongoing */ + HAL_I2C_STATE_BUSY_RX_LISTEN = 0x2AU, /*!< Address Listen Mode and Data Reception + process is ongoing */ + HAL_I2C_STATE_ABORT = 0x60U, /*!< Abort user request ongoing */ + +} HAL_I2C_StateTypeDef; + +/** + * @} + */ + +/** @defgroup HAL_mode_structure_definition HAL mode structure definition + * @brief HAL Mode structure definition + * @note HAL I2C Mode value coding follow below described bitmap :\n + * b7 (not used)\n + * x : Should be set to 0\n + * b6\n + * 0 : None\n + * 1 : Memory (HAL I2C communication is in Memory Mode)\n + * b5\n + * 0 : None\n + * 1 : Slave (HAL I2C communication is in Slave Mode)\n + * b4\n + * 0 : None\n + * 1 : Master (HAL I2C communication is in Master Mode)\n + * b3-b2-b1-b0 (not used)\n + * xxxx : Should be set to 0000 + * @{ + */ +typedef enum +{ + HAL_I2C_MODE_NONE = 0x00U, /*!< No I2C communication on going */ + HAL_I2C_MODE_MASTER = 0x10U, /*!< I2C communication is in Master Mode */ + HAL_I2C_MODE_SLAVE = 0x20U, /*!< I2C communication is in Slave Mode */ + HAL_I2C_MODE_MEM = 0x40U /*!< I2C communication is in Memory Mode */ + +} HAL_I2C_ModeTypeDef; + +/** + * @} + */ + +/** @defgroup I2C_Error_Code_definition I2C Error Code definition + * @brief I2C Error Code definition + * @{ + */ +#define HAL_I2C_ERROR_NONE (0x00000000U) /*!< No error */ +#define HAL_I2C_ERROR_BERR (0x00000001U) /*!< BERR error */ +#define HAL_I2C_ERROR_ARLO (0x00000002U) /*!< ARLO error */ +#define HAL_I2C_ERROR_AF (0x00000004U) /*!< ACKF error */ +#define HAL_I2C_ERROR_OVR (0x00000008U) /*!< OVR error */ +#define HAL_I2C_ERROR_DMA (0x00000010U) /*!< DMA transfer error */ +#define HAL_I2C_ERROR_TIMEOUT (0x00000020U) /*!< Timeout error */ +#define HAL_I2C_ERROR_SIZE (0x00000040U) /*!< Size Management error */ +#define HAL_I2C_ERROR_DMA_PARAM (0x00000080U) /*!< DMA Parameter Error */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) +#define HAL_I2C_ERROR_INVALID_CALLBACK (0x00000100U) /*!< Invalid Callback error */ +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ +#define HAL_I2C_ERROR_INVALID_PARAM (0x00000200U) /*!< Invalid Parameters error */ +/** + * @} + */ + +/** @defgroup I2C_handle_Structure_definition I2C handle Structure definition + * @brief I2C handle Structure definition + * @{ + */ +typedef struct __I2C_HandleTypeDef +{ + I2C_TypeDef *Instance; /*!< I2C registers base address */ + + I2C_InitTypeDef Init; /*!< I2C communication parameters */ + + uint8_t *pBuffPtr; /*!< Pointer to I2C transfer buffer */ + + uint16_t XferSize; /*!< I2C transfer size */ + + __IO uint16_t XferCount; /*!< I2C transfer counter */ + + __IO uint32_t XferOptions; /*!< I2C sequantial transfer options, this parameter can + be a value of @ref I2C_XFEROPTIONS */ + + __IO uint32_t PreviousState; /*!< I2C communication Previous state */ + + HAL_StatusTypeDef(*XferISR)(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, uint32_t ITSources); + /*!< I2C transfer IRQ handler function pointer */ + + DMA_HandleTypeDef *hdmatx; /*!< I2C Tx DMA handle parameters */ + + DMA_HandleTypeDef *hdmarx; /*!< I2C Rx DMA handle parameters */ + + + HAL_LockTypeDef Lock; /*!< I2C locking object */ + + __IO HAL_I2C_StateTypeDef State; /*!< I2C communication state */ + + __IO HAL_I2C_ModeTypeDef Mode; /*!< I2C communication mode */ + + __IO uint32_t ErrorCode; /*!< I2C Error code */ + + __IO uint32_t AddrEventCount; /*!< I2C Address Event counter */ + + __IO uint32_t Devaddress; /*!< I2C Target device address */ + + __IO uint32_t Memaddress; /*!< I2C Target memory address */ + +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + void (* MasterTxCpltCallback)(struct __I2C_HandleTypeDef *hi2c); + /*!< I2C Master Tx Transfer completed callback */ + void (* MasterRxCpltCallback)(struct __I2C_HandleTypeDef *hi2c); + /*!< I2C Master Rx Transfer completed callback */ + void (* SlaveTxCpltCallback)(struct __I2C_HandleTypeDef *hi2c); + /*!< I2C Slave Tx Transfer completed callback */ + void (* SlaveRxCpltCallback)(struct __I2C_HandleTypeDef *hi2c); + /*!< I2C Slave Rx Transfer completed callback */ + void (* ListenCpltCallback)(struct __I2C_HandleTypeDef *hi2c); + /*!< I2C Listen Complete callback */ + void (* MemTxCpltCallback)(struct __I2C_HandleTypeDef *hi2c); + /*!< I2C Memory Tx Transfer completed callback */ + void (* MemRxCpltCallback)(struct __I2C_HandleTypeDef *hi2c); + /*!< I2C Memory Rx Transfer completed callback */ + void (* ErrorCallback)(struct __I2C_HandleTypeDef *hi2c); + /*!< I2C Error callback */ + void (* AbortCpltCallback)(struct __I2C_HandleTypeDef *hi2c); + /*!< I2C Abort callback */ + + void (* AddrCallback)(struct __I2C_HandleTypeDef *hi2c, uint8_t TransferDirection, uint16_t AddrMatchCode); + /*!< I2C Slave Address Match callback */ + + void (* MspInitCallback)(struct __I2C_HandleTypeDef *hi2c); + /*!< I2C Msp Init callback */ + void (* MspDeInitCallback)(struct __I2C_HandleTypeDef *hi2c); + /*!< I2C Msp DeInit callback */ + +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ +} I2C_HandleTypeDef; + +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) +/** + * @brief HAL I2C Callback ID enumeration definition + */ +typedef enum +{ + HAL_I2C_MASTER_TX_COMPLETE_CB_ID = 0x00U, /*!< I2C Master Tx Transfer completed callback ID */ + HAL_I2C_MASTER_RX_COMPLETE_CB_ID = 0x01U, /*!< I2C Master Rx Transfer completed callback ID */ + HAL_I2C_SLAVE_TX_COMPLETE_CB_ID = 0x02U, /*!< I2C Slave Tx Transfer completed callback ID */ + HAL_I2C_SLAVE_RX_COMPLETE_CB_ID = 0x03U, /*!< I2C Slave Rx Transfer completed callback ID */ + HAL_I2C_LISTEN_COMPLETE_CB_ID = 0x04U, /*!< I2C Listen Complete callback ID */ + HAL_I2C_MEM_TX_COMPLETE_CB_ID = 0x05U, /*!< I2C Memory Tx Transfer callback ID */ + HAL_I2C_MEM_RX_COMPLETE_CB_ID = 0x06U, /*!< I2C Memory Rx Transfer completed callback ID */ + HAL_I2C_ERROR_CB_ID = 0x07U, /*!< I2C Error callback ID */ + HAL_I2C_ABORT_CB_ID = 0x08U, /*!< I2C Abort callback ID */ + + HAL_I2C_MSPINIT_CB_ID = 0x09U, /*!< I2C Msp Init callback ID */ + HAL_I2C_MSPDEINIT_CB_ID = 0x0AU /*!< I2C Msp DeInit callback ID */ + +} HAL_I2C_CallbackIDTypeDef; + +/** + * @brief HAL I2C Callback pointer definition + */ +typedef void (*pI2C_CallbackTypeDef)(I2C_HandleTypeDef *hi2c); +/*!< pointer to an I2C callback function */ +typedef void (*pI2C_AddrCallbackTypeDef)(I2C_HandleTypeDef *hi2c, uint8_t TransferDirection, + uint16_t AddrMatchCode); +/*!< pointer to an I2C Address Match callback function */ + +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ +/** + * @} + */ + +/** + * @} + */ +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup I2C_Exported_Constants I2C Exported Constants + * @{ + */ + +/** @defgroup I2C_XFEROPTIONS I2C Sequential Transfer Options + * @{ + */ +#define I2C_FIRST_FRAME ((uint32_t)I2C_SOFTEND_MODE) +#define I2C_FIRST_AND_NEXT_FRAME ((uint32_t)(I2C_RELOAD_MODE | I2C_SOFTEND_MODE)) +#define I2C_NEXT_FRAME ((uint32_t)(I2C_RELOAD_MODE | I2C_SOFTEND_MODE)) +#define I2C_FIRST_AND_LAST_FRAME ((uint32_t)I2C_AUTOEND_MODE) +#define I2C_LAST_FRAME ((uint32_t)I2C_AUTOEND_MODE) +#define I2C_LAST_FRAME_NO_STOP ((uint32_t)I2C_SOFTEND_MODE) + +/* List of XferOptions in usage of : + * 1- Restart condition in all use cases (direction change or not) + */ +#define I2C_OTHER_FRAME (0x000000AAU) +#define I2C_OTHER_AND_LAST_FRAME (0x0000AA00U) +/** + * @} + */ + +/** @defgroup I2C_ADDRESSING_MODE I2C Addressing Mode + * @{ + */ +#define I2C_ADDRESSINGMODE_7BIT (0x00000001U) +#define I2C_ADDRESSINGMODE_10BIT (0x00000002U) +/** + * @} + */ + +/** @defgroup I2C_DUAL_ADDRESSING_MODE I2C Dual Addressing Mode + * @{ + */ +#define I2C_DUALADDRESS_DISABLE (0x00000000U) +#define I2C_DUALADDRESS_ENABLE I2C_OAR2_OA2EN +/** + * @} + */ + +/** @defgroup I2C_OWN_ADDRESS2_MASKS I2C Own Address2 Masks + * @{ + */ +#define I2C_OA2_NOMASK ((uint8_t)0x00U) +#define I2C_OA2_MASK01 ((uint8_t)0x01U) +#define I2C_OA2_MASK02 ((uint8_t)0x02U) +#define I2C_OA2_MASK03 ((uint8_t)0x03U) +#define I2C_OA2_MASK04 ((uint8_t)0x04U) +#define I2C_OA2_MASK05 ((uint8_t)0x05U) +#define I2C_OA2_MASK06 ((uint8_t)0x06U) +#define I2C_OA2_MASK07 ((uint8_t)0x07U) +/** + * @} + */ + +/** @defgroup I2C_GENERAL_CALL_ADDRESSING_MODE I2C General Call Addressing Mode + * @{ + */ +#define I2C_GENERALCALL_DISABLE (0x00000000U) +#define I2C_GENERALCALL_ENABLE I2C_CR1_GCEN +/** + * @} + */ + +/** @defgroup I2C_NOSTRETCH_MODE I2C No-Stretch Mode + * @{ + */ +#define I2C_NOSTRETCH_DISABLE (0x00000000U) +#define I2C_NOSTRETCH_ENABLE I2C_CR1_NOSTRETCH +/** + * @} + */ + +/** @defgroup I2C_MEMORY_ADDRESS_SIZE I2C Memory Address Size + * @{ + */ +#define I2C_MEMADD_SIZE_8BIT (0x00000001U) +#define I2C_MEMADD_SIZE_16BIT (0x00000002U) +/** + * @} + */ + +/** @defgroup I2C_XFERDIRECTION I2C Transfer Direction Master Point of View + * @{ + */ +#define I2C_DIRECTION_TRANSMIT (0x00000000U) +#define I2C_DIRECTION_RECEIVE (0x00000001U) +/** + * @} + */ + +/** @defgroup I2C_RELOAD_END_MODE I2C Reload End Mode + * @{ + */ +#define I2C_RELOAD_MODE I2C_CR2_RELOAD +#define I2C_AUTOEND_MODE I2C_CR2_AUTOEND +#define I2C_SOFTEND_MODE (0x00000000U) +/** + * @} + */ + +/** @defgroup I2C_START_STOP_MODE I2C Start or Stop Mode + * @{ + */ +#define I2C_NO_STARTSTOP (0x00000000U) +#define I2C_GENERATE_STOP (uint32_t)(0x80000000U | I2C_CR2_STOP) +#define I2C_GENERATE_START_READ (uint32_t)(0x80000000U | I2C_CR2_START | I2C_CR2_RD_WRN) +#define I2C_GENERATE_START_WRITE (uint32_t)(0x80000000U | I2C_CR2_START) +/** + * @} + */ + +/** @defgroup I2C_Interrupt_configuration_definition I2C Interrupt configuration definition + * @brief I2C Interrupt definition + * Elements values convention: 0xXXXXXXXX + * - XXXXXXXX : Interrupt control mask + * @{ + */ +#define I2C_IT_ERRI I2C_CR1_ERRIE +#define I2C_IT_TCI I2C_CR1_TCIE +#define I2C_IT_STOPI I2C_CR1_STOPIE +#define I2C_IT_NACKI I2C_CR1_NACKIE +#define I2C_IT_ADDRI I2C_CR1_ADDRIE +#define I2C_IT_RXI I2C_CR1_RXIE +#define I2C_IT_TXI I2C_CR1_TXIE +/** + * @} + */ + +/** @defgroup I2C_Flag_definition I2C Flag definition + * @{ + */ +#define I2C_FLAG_TXE I2C_ISR_TXE +#define I2C_FLAG_TXIS I2C_ISR_TXIS +#define I2C_FLAG_RXNE I2C_ISR_RXNE +#define I2C_FLAG_ADDR I2C_ISR_ADDR +#define I2C_FLAG_AF I2C_ISR_NACKF +#define I2C_FLAG_STOPF I2C_ISR_STOPF +#define I2C_FLAG_TC I2C_ISR_TC +#define I2C_FLAG_TCR I2C_ISR_TCR +#define I2C_FLAG_BERR I2C_ISR_BERR +#define I2C_FLAG_ARLO I2C_ISR_ARLO +#define I2C_FLAG_OVR I2C_ISR_OVR +#define I2C_FLAG_PECERR I2C_ISR_PECERR +#define I2C_FLAG_TIMEOUT I2C_ISR_TIMEOUT +#define I2C_FLAG_ALERT I2C_ISR_ALERT +#define I2C_FLAG_BUSY I2C_ISR_BUSY +#define I2C_FLAG_DIR I2C_ISR_DIR +/** + * @} + */ + +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ + +/** @defgroup I2C_Exported_Macros I2C Exported Macros + * @{ + */ + +/** @brief Reset I2C handle state. + * @param __HANDLE__ specifies the I2C Handle. + * @retval None + */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) +#define __HAL_I2C_RESET_HANDLE_STATE(__HANDLE__) do{ \ + (__HANDLE__)->State = HAL_I2C_STATE_RESET; \ + (__HANDLE__)->MspInitCallback = NULL; \ + (__HANDLE__)->MspDeInitCallback = NULL; \ + } while(0) +#else +#define __HAL_I2C_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_I2C_STATE_RESET) +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + +/** @brief Enable the specified I2C interrupt. + * @param __HANDLE__ specifies the I2C Handle. + * @param __INTERRUPT__ specifies the interrupt source to enable. + * This parameter can be one of the following values: + * @arg @ref I2C_IT_ERRI Errors interrupt enable + * @arg @ref I2C_IT_TCI Transfer complete interrupt enable + * @arg @ref I2C_IT_STOPI STOP detection interrupt enable + * @arg @ref I2C_IT_NACKI NACK received interrupt enable + * @arg @ref I2C_IT_ADDRI Address match interrupt enable + * @arg @ref I2C_IT_RXI RX interrupt enable + * @arg @ref I2C_IT_TXI TX interrupt enable + * + * @retval None + */ +#define __HAL_I2C_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR1 |= (__INTERRUPT__)) + +/** @brief Disable the specified I2C interrupt. + * @param __HANDLE__ specifies the I2C Handle. + * @param __INTERRUPT__ specifies the interrupt source to disable. + * This parameter can be one of the following values: + * @arg @ref I2C_IT_ERRI Errors interrupt enable + * @arg @ref I2C_IT_TCI Transfer complete interrupt enable + * @arg @ref I2C_IT_STOPI STOP detection interrupt enable + * @arg @ref I2C_IT_NACKI NACK received interrupt enable + * @arg @ref I2C_IT_ADDRI Address match interrupt enable + * @arg @ref I2C_IT_RXI RX interrupt enable + * @arg @ref I2C_IT_TXI TX interrupt enable + * + * @retval None + */ +#define __HAL_I2C_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR1 &= (~(__INTERRUPT__))) + +/** @brief Check whether the specified I2C interrupt source is enabled or not. + * @param __HANDLE__ specifies the I2C Handle. + * @param __INTERRUPT__ specifies the I2C interrupt source to check. + * This parameter can be one of the following values: + * @arg @ref I2C_IT_ERRI Errors interrupt enable + * @arg @ref I2C_IT_TCI Transfer complete interrupt enable + * @arg @ref I2C_IT_STOPI STOP detection interrupt enable + * @arg @ref I2C_IT_NACKI NACK received interrupt enable + * @arg @ref I2C_IT_ADDRI Address match interrupt enable + * @arg @ref I2C_IT_RXI RX interrupt enable + * @arg @ref I2C_IT_TXI TX interrupt enable + * + * @retval The new state of __INTERRUPT__ (SET or RESET). + */ +#define __HAL_I2C_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->CR1 & \ + (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET) + +/** @brief Check whether the specified I2C flag is set or not. + * @param __HANDLE__ specifies the I2C Handle. + * @param __FLAG__ specifies the flag to check. + * This parameter can be one of the following values: + * @arg @ref I2C_FLAG_TXE Transmit data register empty + * @arg @ref I2C_FLAG_TXIS Transmit interrupt status + * @arg @ref I2C_FLAG_RXNE Receive data register not empty + * @arg @ref I2C_FLAG_ADDR Address matched (slave mode) + * @arg @ref I2C_FLAG_AF Acknowledge failure received flag + * @arg @ref I2C_FLAG_STOPF STOP detection flag + * @arg @ref I2C_FLAG_TC Transfer complete (master mode) + * @arg @ref I2C_FLAG_TCR Transfer complete reload + * @arg @ref I2C_FLAG_BERR Bus error + * @arg @ref I2C_FLAG_ARLO Arbitration lost + * @arg @ref I2C_FLAG_OVR Overrun/Underrun + * @arg @ref I2C_FLAG_PECERR PEC error in reception + * @arg @ref I2C_FLAG_TIMEOUT Timeout or Tlow detection flag + * @arg @ref I2C_FLAG_ALERT SMBus alert + * @arg @ref I2C_FLAG_BUSY Bus busy + * @arg @ref I2C_FLAG_DIR Transfer direction (slave mode) + * + * @retval The new state of __FLAG__ (SET or RESET). + */ +#define I2C_FLAG_MASK (0x0001FFFFU) +#define __HAL_I2C_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & \ + (__FLAG__)) == (__FLAG__)) ? SET : RESET) + +/** @brief Clear the I2C pending flags which are cleared by writing 1 in a specific bit. + * @param __HANDLE__ specifies the I2C Handle. + * @param __FLAG__ specifies the flag to clear. + * This parameter can be any combination of the following values: + * @arg @ref I2C_FLAG_TXE Transmit data register empty + * @arg @ref I2C_FLAG_ADDR Address matched (slave mode) + * @arg @ref I2C_FLAG_AF Acknowledge failure received flag + * @arg @ref I2C_FLAG_STOPF STOP detection flag + * @arg @ref I2C_FLAG_BERR Bus error + * @arg @ref I2C_FLAG_ARLO Arbitration lost + * @arg @ref I2C_FLAG_OVR Overrun/Underrun + * @arg @ref I2C_FLAG_PECERR PEC error in reception + * @arg @ref I2C_FLAG_TIMEOUT Timeout or Tlow detection flag + * @arg @ref I2C_FLAG_ALERT SMBus alert + * + * @retval None + */ +#define __HAL_I2C_CLEAR_FLAG(__HANDLE__, __FLAG__) (((__FLAG__) == I2C_FLAG_TXE) ? \ + ((__HANDLE__)->Instance->ISR |= (__FLAG__)) : \ + ((__HANDLE__)->Instance->ICR = (__FLAG__))) + +/** @brief Enable the specified I2C peripheral. + * @param __HANDLE__ specifies the I2C Handle. + * @retval None + */ +#define __HAL_I2C_ENABLE(__HANDLE__) (SET_BIT((__HANDLE__)->Instance->CR1, I2C_CR1_PE)) + +/** @brief Disable the specified I2C peripheral. + * @param __HANDLE__ specifies the I2C Handle. + * @retval None + */ +#define __HAL_I2C_DISABLE(__HANDLE__) (CLEAR_BIT((__HANDLE__)->Instance->CR1, I2C_CR1_PE)) + +/** @brief Generate a Non-Acknowledge I2C peripheral in Slave mode. + * @param __HANDLE__ specifies the I2C Handle. + * @retval None + */ +#define __HAL_I2C_GENERATE_NACK(__HANDLE__) (SET_BIT((__HANDLE__)->Instance->CR2, I2C_CR2_NACK)) +/** + * @} + */ + +/* Include I2C HAL Extended module */ +#include "stm32l4xx_hal_i2c_ex.h" + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup I2C_Exported_Functions + * @{ + */ + +/** @addtogroup I2C_Exported_Functions_Group1 Initialization and de-initialization functions + * @{ + */ +/* Initialization and de-initialization functions******************************/ +HAL_StatusTypeDef HAL_I2C_Init(I2C_HandleTypeDef *hi2c); +HAL_StatusTypeDef HAL_I2C_DeInit(I2C_HandleTypeDef *hi2c); +void HAL_I2C_MspInit(I2C_HandleTypeDef *hi2c); +void HAL_I2C_MspDeInit(I2C_HandleTypeDef *hi2c); + +/* Callbacks Register/UnRegister functions ***********************************/ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) +HAL_StatusTypeDef HAL_I2C_RegisterCallback(I2C_HandleTypeDef *hi2c, HAL_I2C_CallbackIDTypeDef CallbackID, + pI2C_CallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_I2C_UnRegisterCallback(I2C_HandleTypeDef *hi2c, HAL_I2C_CallbackIDTypeDef CallbackID); + +HAL_StatusTypeDef HAL_I2C_RegisterAddrCallback(I2C_HandleTypeDef *hi2c, pI2C_AddrCallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_I2C_UnRegisterAddrCallback(I2C_HandleTypeDef *hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ +/** + * @} + */ + +/** @addtogroup I2C_Exported_Functions_Group2 Input and Output operation functions + * @{ + */ +/* IO operation functions ****************************************************/ +/******* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_I2C_Master_Transmit(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size, uint32_t Timeout); +HAL_StatusTypeDef HAL_I2C_Master_Receive(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size, uint32_t Timeout); +HAL_StatusTypeDef HAL_I2C_Slave_Transmit(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, + uint32_t Timeout); +HAL_StatusTypeDef HAL_I2C_Slave_Receive(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, + uint32_t Timeout); +HAL_StatusTypeDef HAL_I2C_Mem_Write(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, + uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout); +HAL_StatusTypeDef HAL_I2C_Mem_Read(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, + uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout); +HAL_StatusTypeDef HAL_I2C_IsDeviceReady(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint32_t Trials, + uint32_t Timeout); + +/******* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_I2C_Master_Transmit_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size); +HAL_StatusTypeDef HAL_I2C_Master_Receive_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size); +HAL_StatusTypeDef HAL_I2C_Slave_Transmit_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_I2C_Slave_Receive_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_I2C_Mem_Write_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, + uint16_t MemAddSize, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_I2C_Mem_Read_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, + uint16_t MemAddSize, uint8_t *pData, uint16_t Size); + +HAL_StatusTypeDef HAL_I2C_Master_Seq_Transmit_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size, uint32_t XferOptions); +HAL_StatusTypeDef HAL_I2C_Master_Seq_Receive_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size, uint32_t XferOptions); +HAL_StatusTypeDef HAL_I2C_Slave_Seq_Transmit_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, + uint32_t XferOptions); +HAL_StatusTypeDef HAL_I2C_Slave_Seq_Receive_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, + uint32_t XferOptions); +HAL_StatusTypeDef HAL_I2C_EnableListen_IT(I2C_HandleTypeDef *hi2c); +HAL_StatusTypeDef HAL_I2C_DisableListen_IT(I2C_HandleTypeDef *hi2c); +HAL_StatusTypeDef HAL_I2C_Master_Abort_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress); + +/******* Non-Blocking mode: DMA */ +HAL_StatusTypeDef HAL_I2C_Master_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size); +HAL_StatusTypeDef HAL_I2C_Master_Receive_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size); +HAL_StatusTypeDef HAL_I2C_Slave_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_I2C_Slave_Receive_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_I2C_Mem_Write_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, + uint16_t MemAddSize, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_I2C_Mem_Read_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, + uint16_t MemAddSize, uint8_t *pData, uint16_t Size); + +HAL_StatusTypeDef HAL_I2C_Master_Seq_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size, uint32_t XferOptions); +HAL_StatusTypeDef HAL_I2C_Master_Seq_Receive_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size, uint32_t XferOptions); +HAL_StatusTypeDef HAL_I2C_Slave_Seq_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, + uint32_t XferOptions); +HAL_StatusTypeDef HAL_I2C_Slave_Seq_Receive_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, + uint32_t XferOptions); +/** + * @} + */ + +/** @addtogroup I2C_IRQ_Handler_and_Callbacks IRQ Handler and Callbacks + * @{ + */ +/******* I2C IRQHandler and Callbacks used in non blocking modes (Interrupt and DMA) */ +void HAL_I2C_EV_IRQHandler(I2C_HandleTypeDef *hi2c); +void HAL_I2C_ER_IRQHandler(I2C_HandleTypeDef *hi2c); +void HAL_I2C_MasterTxCpltCallback(I2C_HandleTypeDef *hi2c); +void HAL_I2C_MasterRxCpltCallback(I2C_HandleTypeDef *hi2c); +void HAL_I2C_SlaveTxCpltCallback(I2C_HandleTypeDef *hi2c); +void HAL_I2C_SlaveRxCpltCallback(I2C_HandleTypeDef *hi2c); +void HAL_I2C_AddrCallback(I2C_HandleTypeDef *hi2c, uint8_t TransferDirection, uint16_t AddrMatchCode); +void HAL_I2C_ListenCpltCallback(I2C_HandleTypeDef *hi2c); +void HAL_I2C_MemTxCpltCallback(I2C_HandleTypeDef *hi2c); +void HAL_I2C_MemRxCpltCallback(I2C_HandleTypeDef *hi2c); +void HAL_I2C_ErrorCallback(I2C_HandleTypeDef *hi2c); +void HAL_I2C_AbortCpltCallback(I2C_HandleTypeDef *hi2c); +/** + * @} + */ + +/** @addtogroup I2C_Exported_Functions_Group3 Peripheral State, Mode and Error functions + * @{ + */ +/* Peripheral State, Mode and Error functions *********************************/ +HAL_I2C_StateTypeDef HAL_I2C_GetState(const I2C_HandleTypeDef *hi2c); +HAL_I2C_ModeTypeDef HAL_I2C_GetMode(const I2C_HandleTypeDef *hi2c); +uint32_t HAL_I2C_GetError(const I2C_HandleTypeDef *hi2c); + +/** + * @} + */ + +/** + * @} + */ + +/* Private constants ---------------------------------------------------------*/ +/** @defgroup I2C_Private_Constants I2C Private Constants + * @{ + */ + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup I2C_Private_Macro I2C Private Macros + * @{ + */ + +#define IS_I2C_ADDRESSING_MODE(MODE) (((MODE) == I2C_ADDRESSINGMODE_7BIT) || \ + ((MODE) == I2C_ADDRESSINGMODE_10BIT)) + +#define IS_I2C_DUAL_ADDRESS(ADDRESS) (((ADDRESS) == I2C_DUALADDRESS_DISABLE) || \ + ((ADDRESS) == I2C_DUALADDRESS_ENABLE)) + +#define IS_I2C_OWN_ADDRESS2_MASK(MASK) (((MASK) == I2C_OA2_NOMASK) || \ + ((MASK) == I2C_OA2_MASK01) || \ + ((MASK) == I2C_OA2_MASK02) || \ + ((MASK) == I2C_OA2_MASK03) || \ + ((MASK) == I2C_OA2_MASK04) || \ + ((MASK) == I2C_OA2_MASK05) || \ + ((MASK) == I2C_OA2_MASK06) || \ + ((MASK) == I2C_OA2_MASK07)) + +#define IS_I2C_GENERAL_CALL(CALL) (((CALL) == I2C_GENERALCALL_DISABLE) || \ + ((CALL) == I2C_GENERALCALL_ENABLE)) + +#define IS_I2C_NO_STRETCH(STRETCH) (((STRETCH) == I2C_NOSTRETCH_DISABLE) || \ + ((STRETCH) == I2C_NOSTRETCH_ENABLE)) + +#define IS_I2C_MEMADD_SIZE(SIZE) (((SIZE) == I2C_MEMADD_SIZE_8BIT) || \ + ((SIZE) == I2C_MEMADD_SIZE_16BIT)) + +#define IS_TRANSFER_MODE(MODE) (((MODE) == I2C_RELOAD_MODE) || \ + ((MODE) == I2C_AUTOEND_MODE) || \ + ((MODE) == I2C_SOFTEND_MODE)) + +#define IS_TRANSFER_REQUEST(REQUEST) (((REQUEST) == I2C_GENERATE_STOP) || \ + ((REQUEST) == I2C_GENERATE_START_READ) || \ + ((REQUEST) == I2C_GENERATE_START_WRITE) || \ + ((REQUEST) == I2C_NO_STARTSTOP)) + +#define IS_I2C_TRANSFER_OPTIONS_REQUEST(REQUEST) (((REQUEST) == I2C_FIRST_FRAME) || \ + ((REQUEST) == I2C_FIRST_AND_NEXT_FRAME) || \ + ((REQUEST) == I2C_NEXT_FRAME) || \ + ((REQUEST) == I2C_FIRST_AND_LAST_FRAME) || \ + ((REQUEST) == I2C_LAST_FRAME) || \ + ((REQUEST) == I2C_LAST_FRAME_NO_STOP) || \ + IS_I2C_TRANSFER_OTHER_OPTIONS_REQUEST(REQUEST)) + +#define IS_I2C_TRANSFER_OTHER_OPTIONS_REQUEST(REQUEST) (((REQUEST) == I2C_OTHER_FRAME) || \ + ((REQUEST) == I2C_OTHER_AND_LAST_FRAME)) + +#define I2C_RESET_CR2(__HANDLE__) ((__HANDLE__)->Instance->CR2 &= \ + (uint32_t)~((uint32_t)(I2C_CR2_SADD | I2C_CR2_HEAD10R | \ + I2C_CR2_NBYTES | I2C_CR2_RELOAD | \ + I2C_CR2_RD_WRN))) + +#define I2C_GET_ADDR_MATCH(__HANDLE__) ((uint16_t)(((__HANDLE__)->Instance->ISR & I2C_ISR_ADDCODE) \ + >> 16U)) +#define I2C_GET_DIR(__HANDLE__) ((uint8_t)(((__HANDLE__)->Instance->ISR & I2C_ISR_DIR) \ + >> 16U)) +#define I2C_GET_STOP_MODE(__HANDLE__) ((__HANDLE__)->Instance->CR2 & I2C_CR2_AUTOEND) +#define I2C_GET_OWN_ADDRESS1(__HANDLE__) ((uint16_t)((__HANDLE__)->Instance->OAR1 & I2C_OAR1_OA1)) +#define I2C_GET_OWN_ADDRESS2(__HANDLE__) ((uint16_t)((__HANDLE__)->Instance->OAR2 & I2C_OAR2_OA2)) + +#define IS_I2C_OWN_ADDRESS1(ADDRESS1) ((ADDRESS1) <= 0x000003FFU) +#define IS_I2C_OWN_ADDRESS2(ADDRESS2) ((ADDRESS2) <= (uint16_t)0x00FFU) + +#define I2C_MEM_ADD_MSB(__ADDRESS__) ((uint8_t)((uint16_t)(((uint16_t)((__ADDRESS__) & \ + (uint16_t)(0xFF00U))) >> 8U))) +#define I2C_MEM_ADD_LSB(__ADDRESS__) ((uint8_t)((uint16_t)((__ADDRESS__) & (uint16_t)(0x00FFU)))) + +#define I2C_GENERATE_START(__ADDMODE__,__ADDRESS__) (((__ADDMODE__) == I2C_ADDRESSINGMODE_7BIT) ? \ + (uint32_t)((((uint32_t)(__ADDRESS__) & (I2C_CR2_SADD)) | \ + (I2C_CR2_START) | (I2C_CR2_AUTOEND)) & \ + (~I2C_CR2_RD_WRN)) : \ + (uint32_t)((((uint32_t)(__ADDRESS__) & (I2C_CR2_SADD)) | \ + (I2C_CR2_ADD10) | (I2C_CR2_START) | \ + (I2C_CR2_AUTOEND)) & (~I2C_CR2_RD_WRN))) + +#define I2C_CHECK_FLAG(__ISR__, __FLAG__) ((((__ISR__) & ((__FLAG__) & I2C_FLAG_MASK)) == \ + ((__FLAG__) & I2C_FLAG_MASK)) ? SET : RESET) +#define I2C_CHECK_IT_SOURCE(__CR1__, __IT__) ((((__CR1__) & (__IT__)) == (__IT__)) ? SET : RESET) +/** + * @} + */ + +/* Private Functions ---------------------------------------------------------*/ +/** @defgroup I2C_Private_Functions I2C Private Functions + * @{ + */ +/* Private functions are defined in stm32l4xx_hal_i2c.c file */ +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + + +#endif /* STM32L4xx_HAL_I2C_H */ diff --git a/CablePositioning_IAP_V1.0/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_i2c_ex.h b/CablePositioning_IAP_V1.0/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_i2c_ex.h index 6db3cf4..15ed69a 100644 --- a/CablePositioning_IAP_V1.0/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_i2c_ex.h +++ b/CablePositioning_IAP_V1.0/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_i2c_ex.h @@ -1,184 +1,184 @@ -/** - ****************************************************************************** - * @file stm32l4xx_hal_i2c_ex.h - * @author MCD Application Team - * @brief Header file of I2C HAL Extended module. - ****************************************************************************** - * @attention - * - * Copyright (c) 2017 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef STM32L4xx_HAL_I2C_EX_H -#define STM32L4xx_HAL_I2C_EX_H - -#ifdef __cplusplus -extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32l4xx_hal_def.h" - -/** @addtogroup STM32L4xx_HAL_Driver - * @{ - */ - -/** @addtogroup I2CEx - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ -/* Exported constants --------------------------------------------------------*/ -/** @defgroup I2CEx_Exported_Constants I2C Extended Exported Constants - * @{ - */ - -/** @defgroup I2CEx_Analog_Filter I2C Extended Analog Filter - * @{ - */ -#define I2C_ANALOGFILTER_ENABLE 0x00000000U -#define I2C_ANALOGFILTER_DISABLE I2C_CR1_ANFOFF -/** - * @} - */ - -/** @defgroup I2CEx_FastModePlus I2C Extended Fast Mode Plus - * @{ - */ -#define I2C_FMP_NOT_SUPPORTED 0xAAAA0000U /*!< Fast Mode Plus not supported */ -#define I2C_FASTMODEPLUS_PB6 SYSCFG_CFGR1_I2C_PB6_FMP /*!< Enable Fast Mode Plus on PB6 */ -#define I2C_FASTMODEPLUS_PB7 SYSCFG_CFGR1_I2C_PB7_FMP /*!< Enable Fast Mode Plus on PB7 */ -#if defined(SYSCFG_CFGR1_I2C_PB8_FMP) -#define I2C_FASTMODEPLUS_PB8 SYSCFG_CFGR1_I2C_PB8_FMP /*!< Enable Fast Mode Plus on PB8 */ -#define I2C_FASTMODEPLUS_PB9 SYSCFG_CFGR1_I2C_PB9_FMP /*!< Enable Fast Mode Plus on PB9 */ -#else -#define I2C_FASTMODEPLUS_PB8 (uint32_t)(0x00000010U | I2C_FMP_NOT_SUPPORTED) /*!< Fast Mode Plus PB8 not supported */ -#define I2C_FASTMODEPLUS_PB9 (uint32_t)(0x00000012U | I2C_FMP_NOT_SUPPORTED) /*!< Fast Mode Plus PB9 not supported */ -#endif /* SYSCFG_CFGR1_I2C_PB8_FMP */ -#define I2C_FASTMODEPLUS_I2C1 SYSCFG_CFGR1_I2C1_FMP /*!< Enable Fast Mode Plus on I2C1 pins */ -#if defined(SYSCFG_CFGR1_I2C2_FMP) -#define I2C_FASTMODEPLUS_I2C2 SYSCFG_CFGR1_I2C2_FMP /*!< Enable Fast Mode Plus on I2C2 pins */ -#else -#define I2C_FASTMODEPLUS_I2C2 (uint32_t)(0x00000200U | I2C_FMP_NOT_SUPPORTED) /*!< Fast Mode Plus I2C2 not supported */ -#endif /* SYSCFG_CFGR1_I2C2_FMP */ -#define I2C_FASTMODEPLUS_I2C3 SYSCFG_CFGR1_I2C3_FMP /*!< Enable Fast Mode Plus on I2C3 pins */ -#if defined(SYSCFG_CFGR1_I2C4_FMP) -#define I2C_FASTMODEPLUS_I2C4 SYSCFG_CFGR1_I2C4_FMP /*!< Enable Fast Mode Plus on I2C4 pins */ -#else -#define I2C_FASTMODEPLUS_I2C4 (uint32_t)(0x00000800U | I2C_FMP_NOT_SUPPORTED) /*!< Fast Mode Plus I2C4 not supported */ -#endif /* SYSCFG_CFGR1_I2C4_FMP */ -/** - * @} - */ - -/** - * @} - */ - -/* Exported macro ------------------------------------------------------------*/ -/** @defgroup I2CEx_Exported_Macros I2C Extended Exported Macros - * @{ - */ - -/** - * @} - */ - -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup I2CEx_Exported_Functions I2C Extended Exported Functions - * @{ - */ - -/** @addtogroup I2CEx_Exported_Functions_Group1 Filter Mode Functions - * @{ - */ -/* Peripheral Control functions ************************************************/ -HAL_StatusTypeDef HAL_I2CEx_ConfigAnalogFilter(I2C_HandleTypeDef *hi2c, uint32_t AnalogFilter); -HAL_StatusTypeDef HAL_I2CEx_ConfigDigitalFilter(I2C_HandleTypeDef *hi2c, uint32_t DigitalFilter); -/** - * @} - */ - -/** @addtogroup I2CEx_Exported_Functions_Group2 WakeUp Mode Functions - * @{ - */ -HAL_StatusTypeDef HAL_I2CEx_EnableWakeUp(I2C_HandleTypeDef *hi2c); -HAL_StatusTypeDef HAL_I2CEx_DisableWakeUp(I2C_HandleTypeDef *hi2c); -/** - * @} - */ - -/** @addtogroup I2CEx_Exported_Functions_Group3 Fast Mode Plus Functions - * @{ - */ -void HAL_I2CEx_EnableFastModePlus(uint32_t ConfigFastModePlus); -void HAL_I2CEx_DisableFastModePlus(uint32_t ConfigFastModePlus); -/** - * @} - */ - -/** - * @} - */ - -/* Private constants ---------------------------------------------------------*/ -/** @defgroup I2CEx_Private_Constants I2C Extended Private Constants - * @{ - */ - -/** - * @} - */ - -/* Private macros ------------------------------------------------------------*/ -/** @defgroup I2CEx_Private_Macro I2C Extended Private Macros - * @{ - */ -#define IS_I2C_ANALOG_FILTER(FILTER) (((FILTER) == I2C_ANALOGFILTER_ENABLE) || \ - ((FILTER) == I2C_ANALOGFILTER_DISABLE)) - -#define IS_I2C_DIGITAL_FILTER(FILTER) ((FILTER) <= 0x0000000FU) - -#define IS_I2C_FASTMODEPLUS(__CONFIG__) ((((__CONFIG__) & I2C_FMP_NOT_SUPPORTED) != I2C_FMP_NOT_SUPPORTED) && \ - ((((__CONFIG__) & (I2C_FASTMODEPLUS_PB6)) == I2C_FASTMODEPLUS_PB6) || \ - (((__CONFIG__) & (I2C_FASTMODEPLUS_PB7)) == I2C_FASTMODEPLUS_PB7) || \ - (((__CONFIG__) & (I2C_FASTMODEPLUS_PB8)) == I2C_FASTMODEPLUS_PB8) || \ - (((__CONFIG__) & (I2C_FASTMODEPLUS_PB9)) == I2C_FASTMODEPLUS_PB9) || \ - (((__CONFIG__) & (I2C_FASTMODEPLUS_I2C1)) == I2C_FASTMODEPLUS_I2C1) || \ - (((__CONFIG__) & (I2C_FASTMODEPLUS_I2C2)) == I2C_FASTMODEPLUS_I2C2) || \ - (((__CONFIG__) & (I2C_FASTMODEPLUS_I2C3)) == I2C_FASTMODEPLUS_I2C3) || \ - (((__CONFIG__) & (I2C_FASTMODEPLUS_I2C4)) == I2C_FASTMODEPLUS_I2C4))) -/** - * @} - */ - -/* Private Functions ---------------------------------------------------------*/ -/** @defgroup I2CEx_Private_Functions I2C Extended Private Functions - * @{ - */ -/* Private functions are defined in stm32l4xx_hal_i2c_ex.c file */ -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /* STM32L4xx_HAL_I2C_EX_H */ +/** + ****************************************************************************** + * @file stm32l4xx_hal_i2c_ex.h + * @author MCD Application Team + * @brief Header file of I2C HAL Extended module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32L4xx_HAL_I2C_EX_H +#define STM32L4xx_HAL_I2C_EX_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l4xx_hal_def.h" + +/** @addtogroup STM32L4xx_HAL_Driver + * @{ + */ + +/** @addtogroup I2CEx + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ +/** @defgroup I2CEx_Exported_Constants I2C Extended Exported Constants + * @{ + */ + +/** @defgroup I2CEx_Analog_Filter I2C Extended Analog Filter + * @{ + */ +#define I2C_ANALOGFILTER_ENABLE 0x00000000U +#define I2C_ANALOGFILTER_DISABLE I2C_CR1_ANFOFF +/** + * @} + */ + +/** @defgroup I2CEx_FastModePlus I2C Extended Fast Mode Plus + * @{ + */ +#define I2C_FMP_NOT_SUPPORTED 0xAAAA0000U /*!< Fast Mode Plus not supported */ +#define I2C_FASTMODEPLUS_PB6 SYSCFG_CFGR1_I2C_PB6_FMP /*!< Enable Fast Mode Plus on PB6 */ +#define I2C_FASTMODEPLUS_PB7 SYSCFG_CFGR1_I2C_PB7_FMP /*!< Enable Fast Mode Plus on PB7 */ +#if defined(SYSCFG_CFGR1_I2C_PB8_FMP) +#define I2C_FASTMODEPLUS_PB8 SYSCFG_CFGR1_I2C_PB8_FMP /*!< Enable Fast Mode Plus on PB8 */ +#define I2C_FASTMODEPLUS_PB9 SYSCFG_CFGR1_I2C_PB9_FMP /*!< Enable Fast Mode Plus on PB9 */ +#else +#define I2C_FASTMODEPLUS_PB8 (uint32_t)(0x00000010U | I2C_FMP_NOT_SUPPORTED) /*!< Fast Mode Plus PB8 not supported */ +#define I2C_FASTMODEPLUS_PB9 (uint32_t)(0x00000012U | I2C_FMP_NOT_SUPPORTED) /*!< Fast Mode Plus PB9 not supported */ +#endif /* SYSCFG_CFGR1_I2C_PB8_FMP */ +#define I2C_FASTMODEPLUS_I2C1 SYSCFG_CFGR1_I2C1_FMP /*!< Enable Fast Mode Plus on I2C1 pins */ +#if defined(SYSCFG_CFGR1_I2C2_FMP) +#define I2C_FASTMODEPLUS_I2C2 SYSCFG_CFGR1_I2C2_FMP /*!< Enable Fast Mode Plus on I2C2 pins */ +#else +#define I2C_FASTMODEPLUS_I2C2 (uint32_t)(0x00000200U | I2C_FMP_NOT_SUPPORTED) /*!< Fast Mode Plus I2C2 not supported */ +#endif /* SYSCFG_CFGR1_I2C2_FMP */ +#define I2C_FASTMODEPLUS_I2C3 SYSCFG_CFGR1_I2C3_FMP /*!< Enable Fast Mode Plus on I2C3 pins */ +#if defined(SYSCFG_CFGR1_I2C4_FMP) +#define I2C_FASTMODEPLUS_I2C4 SYSCFG_CFGR1_I2C4_FMP /*!< Enable Fast Mode Plus on I2C4 pins */ +#else +#define I2C_FASTMODEPLUS_I2C4 (uint32_t)(0x00000800U | I2C_FMP_NOT_SUPPORTED) /*!< Fast Mode Plus I2C4 not supported */ +#endif /* SYSCFG_CFGR1_I2C4_FMP */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup I2CEx_Exported_Macros I2C Extended Exported Macros + * @{ + */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup I2CEx_Exported_Functions I2C Extended Exported Functions + * @{ + */ + +/** @addtogroup I2CEx_Exported_Functions_Group1 Filter Mode Functions + * @{ + */ +/* Peripheral Control functions ************************************************/ +HAL_StatusTypeDef HAL_I2CEx_ConfigAnalogFilter(I2C_HandleTypeDef *hi2c, uint32_t AnalogFilter); +HAL_StatusTypeDef HAL_I2CEx_ConfigDigitalFilter(I2C_HandleTypeDef *hi2c, uint32_t DigitalFilter); +/** + * @} + */ + +/** @addtogroup I2CEx_Exported_Functions_Group2 WakeUp Mode Functions + * @{ + */ +HAL_StatusTypeDef HAL_I2CEx_EnableWakeUp(I2C_HandleTypeDef *hi2c); +HAL_StatusTypeDef HAL_I2CEx_DisableWakeUp(I2C_HandleTypeDef *hi2c); +/** + * @} + */ + +/** @addtogroup I2CEx_Exported_Functions_Group3 Fast Mode Plus Functions + * @{ + */ +void HAL_I2CEx_EnableFastModePlus(uint32_t ConfigFastModePlus); +void HAL_I2CEx_DisableFastModePlus(uint32_t ConfigFastModePlus); +/** + * @} + */ + +/** + * @} + */ + +/* Private constants ---------------------------------------------------------*/ +/** @defgroup I2CEx_Private_Constants I2C Extended Private Constants + * @{ + */ + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup I2CEx_Private_Macro I2C Extended Private Macros + * @{ + */ +#define IS_I2C_ANALOG_FILTER(FILTER) (((FILTER) == I2C_ANALOGFILTER_ENABLE) || \ + ((FILTER) == I2C_ANALOGFILTER_DISABLE)) + +#define IS_I2C_DIGITAL_FILTER(FILTER) ((FILTER) <= 0x0000000FU) + +#define IS_I2C_FASTMODEPLUS(__CONFIG__) ((((__CONFIG__) & I2C_FMP_NOT_SUPPORTED) != I2C_FMP_NOT_SUPPORTED) && \ + ((((__CONFIG__) & (I2C_FASTMODEPLUS_PB6)) == I2C_FASTMODEPLUS_PB6) || \ + (((__CONFIG__) & (I2C_FASTMODEPLUS_PB7)) == I2C_FASTMODEPLUS_PB7) || \ + (((__CONFIG__) & (I2C_FASTMODEPLUS_PB8)) == I2C_FASTMODEPLUS_PB8) || \ + (((__CONFIG__) & (I2C_FASTMODEPLUS_PB9)) == I2C_FASTMODEPLUS_PB9) || \ + (((__CONFIG__) & (I2C_FASTMODEPLUS_I2C1)) == I2C_FASTMODEPLUS_I2C1) || \ + (((__CONFIG__) & (I2C_FASTMODEPLUS_I2C2)) == I2C_FASTMODEPLUS_I2C2) || \ + (((__CONFIG__) & (I2C_FASTMODEPLUS_I2C3)) == I2C_FASTMODEPLUS_I2C3) || \ + (((__CONFIG__) & (I2C_FASTMODEPLUS_I2C4)) == I2C_FASTMODEPLUS_I2C4))) +/** + * @} + */ + +/* Private Functions ---------------------------------------------------------*/ +/** @defgroup I2CEx_Private_Functions I2C Extended Private Functions + * @{ + */ +/* Private functions are defined in stm32l4xx_hal_i2c_ex.c file */ +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32L4xx_HAL_I2C_EX_H */ diff --git a/CablePositioning_IAP_V1.0/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_pwr.h b/CablePositioning_IAP_V1.0/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_pwr.h index 4f85f8c..e90fcb7 100644 --- a/CablePositioning_IAP_V1.0/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_pwr.h +++ b/CablePositioning_IAP_V1.0/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_pwr.h @@ -1,411 +1,411 @@ -/** - ****************************************************************************** - * @file stm32l4xx_hal_pwr.h - * @author MCD Application Team - * @brief Header file of PWR HAL module. - ****************************************************************************** - * @attention - * - * Copyright (c) 2017 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef STM32L4xx_HAL_PWR_H -#define STM32L4xx_HAL_PWR_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32l4xx_hal_def.h" - -/** @addtogroup STM32L4xx_HAL_Driver - * @{ - */ - -/** @addtogroup PWR - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ - -/** @defgroup PWR_Exported_Types PWR Exported Types - * @{ - */ - -/** - * @brief PWR PVD configuration structure definition - */ -typedef struct -{ - uint32_t PVDLevel; /*!< PVDLevel: Specifies the PVD detection level. - This parameter can be a value of @ref PWR_PVD_detection_level. */ - - uint32_t Mode; /*!< Mode: Specifies the operating mode for the selected pins. - This parameter can be a value of @ref PWR_PVD_Mode. */ -}PWR_PVDTypeDef; - - -/** - * @} - */ - -/* Exported constants --------------------------------------------------------*/ - -/** @defgroup PWR_Exported_Constants PWR Exported Constants - * @{ - */ - - -/** @defgroup PWR_PVD_detection_level Programmable Voltage Detection levels - * @{ - */ -#define PWR_PVDLEVEL_0 PWR_CR2_PLS_LEV0 /*!< PVD threshold around 2.0 V */ -#define PWR_PVDLEVEL_1 PWR_CR2_PLS_LEV1 /*!< PVD threshold around 2.2 V */ -#define PWR_PVDLEVEL_2 PWR_CR2_PLS_LEV2 /*!< PVD threshold around 2.4 V */ -#define PWR_PVDLEVEL_3 PWR_CR2_PLS_LEV3 /*!< PVD threshold around 2.5 V */ -#define PWR_PVDLEVEL_4 PWR_CR2_PLS_LEV4 /*!< PVD threshold around 2.6 V */ -#define PWR_PVDLEVEL_5 PWR_CR2_PLS_LEV5 /*!< PVD threshold around 2.8 V */ -#define PWR_PVDLEVEL_6 PWR_CR2_PLS_LEV6 /*!< PVD threshold around 2.9 V */ -#define PWR_PVDLEVEL_7 PWR_CR2_PLS_LEV7 /*!< External input analog voltage (compared internally to VREFINT) */ -/** - * @} - */ - -/** @defgroup PWR_PVD_Mode PWR PVD interrupt and event mode - * @{ - */ -#define PWR_PVD_MODE_NORMAL ((uint32_t)0x00000000) /*!< Basic mode is used */ -#define PWR_PVD_MODE_IT_RISING ((uint32_t)0x00010001) /*!< External Interrupt Mode with Rising edge trigger detection */ -#define PWR_PVD_MODE_IT_FALLING ((uint32_t)0x00010002) /*!< External Interrupt Mode with Falling edge trigger detection */ -#define PWR_PVD_MODE_IT_RISING_FALLING ((uint32_t)0x00010003) /*!< External Interrupt Mode with Rising/Falling edge trigger detection */ -#define PWR_PVD_MODE_EVENT_RISING ((uint32_t)0x00020001) /*!< Event Mode with Rising edge trigger detection */ -#define PWR_PVD_MODE_EVENT_FALLING ((uint32_t)0x00020002) /*!< Event Mode with Falling edge trigger detection */ -#define PWR_PVD_MODE_EVENT_RISING_FALLING ((uint32_t)0x00020003) /*!< Event Mode with Rising/Falling edge trigger detection */ -/** - * @} - */ - - - - -/** @defgroup PWR_Regulator_state_in_SLEEP_STOP_mode PWR regulator mode - * @{ - */ -#define PWR_MAINREGULATOR_ON ((uint32_t)0x00000000) /*!< Regulator in main mode */ -#define PWR_LOWPOWERREGULATOR_ON PWR_CR1_LPR /*!< Regulator in low-power mode */ -/** - * @} - */ - -/** @defgroup PWR_SLEEP_mode_entry PWR SLEEP mode entry - * @{ - */ -#define PWR_SLEEPENTRY_WFI ((uint8_t)0x01) /*!< Wait For Interruption instruction to enter Sleep mode */ -#define PWR_SLEEPENTRY_WFE ((uint8_t)0x02) /*!< Wait For Event instruction to enter Sleep mode */ -/** - * @} - */ - -/** @defgroup PWR_STOP_mode_entry PWR STOP mode entry - * @{ - */ -#define PWR_STOPENTRY_WFI ((uint8_t)0x01) /*!< Wait For Interruption instruction to enter Stop mode */ -#define PWR_STOPENTRY_WFE ((uint8_t)0x02) /*!< Wait For Event instruction to enter Stop mode */ -/** - * @} - */ - - -/** @defgroup PWR_PVD_EXTI_LINE PWR PVD external interrupt line - * @{ - */ -#define PWR_EXTI_LINE_PVD ((uint32_t)0x00010000) /*!< External interrupt line 16 Connected to the PVD EXTI Line */ -/** - * @} - */ - -/** @defgroup PWR_PVD_EVENT_LINE PWR PVD event line - * @{ - */ -#define PWR_EVENT_LINE_PVD ((uint32_t)0x00010000) /*!< Event line 16 Connected to the PVD Event Line */ -/** - * @} - */ - -/** - * @} - */ - -/* Exported macros -----------------------------------------------------------*/ -/** @defgroup PWR_Exported_Macros PWR Exported Macros - * @{ - */ - -/** @brief Check whether or not a specific PWR flag is set. - * @param __FLAG__ specifies the flag to check. - * This parameter can be one of the following values: - * @arg @ref PWR_FLAG_WUF1 Wake Up Flag 1. Indicates that a wakeup event - * was received from the WKUP pin 1. - * @arg @ref PWR_FLAG_WUF2 Wake Up Flag 2. Indicates that a wakeup event - * was received from the WKUP pin 2. - * @arg @ref PWR_FLAG_WUF3 Wake Up Flag 3. Indicates that a wakeup event - * was received from the WKUP pin 3. - * @arg @ref PWR_FLAG_WUF4 Wake Up Flag 4. Indicates that a wakeup event - * was received from the WKUP pin 4. - * @arg @ref PWR_FLAG_WUF5 Wake Up Flag 5. Indicates that a wakeup event - * was received from the WKUP pin 5. - * @arg @ref PWR_FLAG_SB StandBy Flag. Indicates that the system - * entered StandBy mode. - * @arg @ref PWR_FLAG_EXT_SMPS External SMPS Ready Flag. When available on device, indicates - * that external switch can be closed to connect to the external SMPS, when the Range 2 - * of internal regulator is ready. - * @arg @ref PWR_FLAG_WUFI Wake-Up Flag Internal. Set when a wakeup is detected on - * the internal wakeup line. - * @arg @ref PWR_FLAG_REGLPS Low Power Regulator Started. Indicates whether or not the - * low-power regulator is ready. - * @arg @ref PWR_FLAG_REGLPF Low Power Regulator Flag. Indicates whether the - * regulator is ready in main mode or is in low-power mode. - * @arg @ref PWR_FLAG_VOSF Voltage Scaling Flag. Indicates whether the regulator is ready - * in the selected voltage range or is still changing to the required voltage level. - * @arg @ref PWR_FLAG_PVDO Power Voltage Detector Output. Indicates whether VDD voltage is - * below or above the selected PVD threshold. - * @arg @ref PWR_FLAG_PVMO1 Peripheral Voltage Monitoring Output 1. Indicates whether VDDUSB voltage is - * is below or above PVM1 threshold (applicable when USB feature is supported). - @if STM32L486xx - * @arg @ref PWR_FLAG_PVMO2 Peripheral Voltage Monitoring Output 2. Indicates whether VDDIO2 voltage is - * is below or above PVM2 threshold (applicable when VDDIO2 is present on device). - @endif - * @arg @ref PWR_FLAG_PVMO3 Peripheral Voltage Monitoring Output 3. Indicates whether VDDA voltage is - * is below or above PVM3 threshold. - * @arg @ref PWR_FLAG_PVMO4 Peripheral Voltage Monitoring Output 4. Indicates whether VDDA voltage is - * is below or above PVM4 threshold. - * - * @retval The new state of __FLAG__ (TRUE or FALSE). - */ -#define __HAL_PWR_GET_FLAG(__FLAG__) ( ((((uint8_t)(__FLAG__)) >> 5U) == 1) ?\ - (PWR->SR1 & (1U << ((__FLAG__) & 31U))) :\ - (PWR->SR2 & (1U << ((__FLAG__) & 31U))) ) - -/** @brief Clear a specific PWR flag. - * @param __FLAG__ specifies the flag to clear. - * This parameter can be one of the following values: - * @arg @ref PWR_FLAG_WUF1 Wake Up Flag 1. Indicates that a wakeup event - * was received from the WKUP pin 1. - * @arg @ref PWR_FLAG_WUF2 Wake Up Flag 2. Indicates that a wakeup event - * was received from the WKUP pin 2. - * @arg @ref PWR_FLAG_WUF3 Wake Up Flag 3. Indicates that a wakeup event - * was received from the WKUP pin 3. - * @arg @ref PWR_FLAG_WUF4 Wake Up Flag 4. Indicates that a wakeup event - * was received from the WKUP pin 4. - * @arg @ref PWR_FLAG_WUF5 Wake Up Flag 5. Indicates that a wakeup event - * was received from the WKUP pin 5. - * @arg @ref PWR_FLAG_WU Encompasses all five Wake Up Flags. - * @arg @ref PWR_FLAG_SB Standby Flag. Indicates that the system - * entered Standby mode. - * @retval None - */ -#define __HAL_PWR_CLEAR_FLAG(__FLAG__) ( (((uint8_t)(__FLAG__)) == PWR_FLAG_WU) ?\ - (PWR->SCR = (__FLAG__)) :\ - (PWR->SCR = (1U << ((__FLAG__) & 31U))) ) -/** - * @brief Enable the PVD Extended Interrupt Line. - * @retval None - */ -#define __HAL_PWR_PVD_EXTI_ENABLE_IT() SET_BIT(EXTI->IMR1, PWR_EXTI_LINE_PVD) - -/** - * @brief Disable the PVD Extended Interrupt Line. - * @retval None - */ -#define __HAL_PWR_PVD_EXTI_DISABLE_IT() CLEAR_BIT(EXTI->IMR1, PWR_EXTI_LINE_PVD) - -/** - * @brief Enable the PVD Event Line. - * @retval None - */ -#define __HAL_PWR_PVD_EXTI_ENABLE_EVENT() SET_BIT(EXTI->EMR1, PWR_EVENT_LINE_PVD) - -/** - * @brief Disable the PVD Event Line. - * @retval None - */ -#define __HAL_PWR_PVD_EXTI_DISABLE_EVENT() CLEAR_BIT(EXTI->EMR1, PWR_EVENT_LINE_PVD) - -/** - * @brief Enable the PVD Extended Interrupt Rising Trigger. - * @retval None - */ -#define __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE() SET_BIT(EXTI->RTSR1, PWR_EXTI_LINE_PVD) - -/** - * @brief Disable the PVD Extended Interrupt Rising Trigger. - * @retval None - */ -#define __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE() CLEAR_BIT(EXTI->RTSR1, PWR_EXTI_LINE_PVD) - -/** - * @brief Enable the PVD Extended Interrupt Falling Trigger. - * @retval None - */ -#define __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE() SET_BIT(EXTI->FTSR1, PWR_EXTI_LINE_PVD) - - -/** - * @brief Disable the PVD Extended Interrupt Falling Trigger. - * @retval None - */ -#define __HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE() CLEAR_BIT(EXTI->FTSR1, PWR_EXTI_LINE_PVD) - - -/** - * @brief Enable the PVD Extended Interrupt Rising & Falling Trigger. - * @retval None - */ -#define __HAL_PWR_PVD_EXTI_ENABLE_RISING_FALLING_EDGE() \ - do { \ - __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE(); \ - __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE(); \ - } while(0) - -/** - * @brief Disable the PVD Extended Interrupt Rising & Falling Trigger. - * @retval None - */ -#define __HAL_PWR_PVD_EXTI_DISABLE_RISING_FALLING_EDGE() \ - do { \ - __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE(); \ - __HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE(); \ - } while(0) - -/** - * @brief Generate a Software interrupt on selected EXTI line. - * @retval None - */ -#define __HAL_PWR_PVD_EXTI_GENERATE_SWIT() SET_BIT(EXTI->SWIER1, PWR_EXTI_LINE_PVD) - -/** - * @brief Check whether or not the PVD EXTI interrupt flag is set. - * @retval EXTI PVD Line Status. - */ -#define __HAL_PWR_PVD_EXTI_GET_FLAG() (EXTI->PR1 & PWR_EXTI_LINE_PVD) - -/** - * @brief Clear the PVD EXTI interrupt flag. - * @retval None - */ -#define __HAL_PWR_PVD_EXTI_CLEAR_FLAG() WRITE_REG(EXTI->PR1, PWR_EXTI_LINE_PVD) - -/** - * @} - */ - - -/* Private macros --------------------------------------------------------*/ -/** @addtogroup PWR_Private_Macros PWR Private Macros - * @{ - */ - -#define IS_PWR_PVD_LEVEL(LEVEL) (((LEVEL) == PWR_PVDLEVEL_0) || ((LEVEL) == PWR_PVDLEVEL_1)|| \ - ((LEVEL) == PWR_PVDLEVEL_2) || ((LEVEL) == PWR_PVDLEVEL_3)|| \ - ((LEVEL) == PWR_PVDLEVEL_4) || ((LEVEL) == PWR_PVDLEVEL_5)|| \ - ((LEVEL) == PWR_PVDLEVEL_6) || ((LEVEL) == PWR_PVDLEVEL_7)) - -#define IS_PWR_PVD_MODE(MODE) (((MODE) == PWR_PVD_MODE_NORMAL) ||\ - ((MODE) == PWR_PVD_MODE_IT_RISING) ||\ - ((MODE) == PWR_PVD_MODE_IT_FALLING) ||\ - ((MODE) == PWR_PVD_MODE_IT_RISING_FALLING) ||\ - ((MODE) == PWR_PVD_MODE_EVENT_RISING) ||\ - ((MODE) == PWR_PVD_MODE_EVENT_FALLING) ||\ - ((MODE) == PWR_PVD_MODE_EVENT_RISING_FALLING)) - -#define IS_PWR_REGULATOR(REGULATOR) (((REGULATOR) == PWR_MAINREGULATOR_ON) || \ - ((REGULATOR) == PWR_LOWPOWERREGULATOR_ON)) - -#define IS_PWR_SLEEP_ENTRY(ENTRY) (((ENTRY) == PWR_SLEEPENTRY_WFI) || ((ENTRY) == PWR_SLEEPENTRY_WFE)) - -#define IS_PWR_STOP_ENTRY(ENTRY) (((ENTRY) == PWR_STOPENTRY_WFI) || ((ENTRY) == PWR_STOPENTRY_WFE) ) - -/** - * @} - */ - -/* Include PWR HAL Extended module */ -#include "stm32l4xx_hal_pwr_ex.h" - -/* Exported functions --------------------------------------------------------*/ - -/** @addtogroup PWR_Exported_Functions PWR Exported Functions - * @{ - */ - -/** @addtogroup PWR_Exported_Functions_Group1 Initialization and de-initialization functions - * @{ - */ - -/* Initialization and de-initialization functions *******************************/ -void HAL_PWR_DeInit(void); -void HAL_PWR_EnableBkUpAccess(void); -void HAL_PWR_DisableBkUpAccess(void); - -/** - * @} - */ - -/** @addtogroup PWR_Exported_Functions_Group2 Peripheral Control functions - * @{ - */ - -/* Peripheral Control functions ************************************************/ -HAL_StatusTypeDef HAL_PWR_ConfigPVD(PWR_PVDTypeDef *sConfigPVD); -void HAL_PWR_EnablePVD(void); -void HAL_PWR_DisablePVD(void); - - -/* WakeUp pins configuration functions ****************************************/ -void HAL_PWR_EnableWakeUpPin(uint32_t WakeUpPinPolarity); -void HAL_PWR_DisableWakeUpPin(uint32_t WakeUpPinx); - -/* Low Power modes configuration functions ************************************/ -void HAL_PWR_EnterSLEEPMode(uint32_t Regulator, uint8_t SLEEPEntry); -void HAL_PWR_EnterSTOPMode(uint32_t Regulator, uint8_t STOPEntry); -void HAL_PWR_EnterSTANDBYMode(void); - -void HAL_PWR_EnableSleepOnExit(void); -void HAL_PWR_DisableSleepOnExit(void); -void HAL_PWR_EnableSEVOnPend(void); -void HAL_PWR_DisableSEVOnPend(void); - -void HAL_PWR_PVDCallback(void); - - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - - -#endif /* STM32L4xx_HAL_PWR_H */ +/** + ****************************************************************************** + * @file stm32l4xx_hal_pwr.h + * @author MCD Application Team + * @brief Header file of PWR HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32L4xx_HAL_PWR_H +#define STM32L4xx_HAL_PWR_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l4xx_hal_def.h" + +/** @addtogroup STM32L4xx_HAL_Driver + * @{ + */ + +/** @addtogroup PWR + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ + +/** @defgroup PWR_Exported_Types PWR Exported Types + * @{ + */ + +/** + * @brief PWR PVD configuration structure definition + */ +typedef struct +{ + uint32_t PVDLevel; /*!< PVDLevel: Specifies the PVD detection level. + This parameter can be a value of @ref PWR_PVD_detection_level. */ + + uint32_t Mode; /*!< Mode: Specifies the operating mode for the selected pins. + This parameter can be a value of @ref PWR_PVD_Mode. */ +}PWR_PVDTypeDef; + + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup PWR_Exported_Constants PWR Exported Constants + * @{ + */ + + +/** @defgroup PWR_PVD_detection_level Programmable Voltage Detection levels + * @{ + */ +#define PWR_PVDLEVEL_0 PWR_CR2_PLS_LEV0 /*!< PVD threshold around 2.0 V */ +#define PWR_PVDLEVEL_1 PWR_CR2_PLS_LEV1 /*!< PVD threshold around 2.2 V */ +#define PWR_PVDLEVEL_2 PWR_CR2_PLS_LEV2 /*!< PVD threshold around 2.4 V */ +#define PWR_PVDLEVEL_3 PWR_CR2_PLS_LEV3 /*!< PVD threshold around 2.5 V */ +#define PWR_PVDLEVEL_4 PWR_CR2_PLS_LEV4 /*!< PVD threshold around 2.6 V */ +#define PWR_PVDLEVEL_5 PWR_CR2_PLS_LEV5 /*!< PVD threshold around 2.8 V */ +#define PWR_PVDLEVEL_6 PWR_CR2_PLS_LEV6 /*!< PVD threshold around 2.9 V */ +#define PWR_PVDLEVEL_7 PWR_CR2_PLS_LEV7 /*!< External input analog voltage (compared internally to VREFINT) */ +/** + * @} + */ + +/** @defgroup PWR_PVD_Mode PWR PVD interrupt and event mode + * @{ + */ +#define PWR_PVD_MODE_NORMAL ((uint32_t)0x00000000) /*!< Basic mode is used */ +#define PWR_PVD_MODE_IT_RISING ((uint32_t)0x00010001) /*!< External Interrupt Mode with Rising edge trigger detection */ +#define PWR_PVD_MODE_IT_FALLING ((uint32_t)0x00010002) /*!< External Interrupt Mode with Falling edge trigger detection */ +#define PWR_PVD_MODE_IT_RISING_FALLING ((uint32_t)0x00010003) /*!< External Interrupt Mode with Rising/Falling edge trigger detection */ +#define PWR_PVD_MODE_EVENT_RISING ((uint32_t)0x00020001) /*!< Event Mode with Rising edge trigger detection */ +#define PWR_PVD_MODE_EVENT_FALLING ((uint32_t)0x00020002) /*!< Event Mode with Falling edge trigger detection */ +#define PWR_PVD_MODE_EVENT_RISING_FALLING ((uint32_t)0x00020003) /*!< Event Mode with Rising/Falling edge trigger detection */ +/** + * @} + */ + + + + +/** @defgroup PWR_Regulator_state_in_SLEEP_STOP_mode PWR regulator mode + * @{ + */ +#define PWR_MAINREGULATOR_ON ((uint32_t)0x00000000) /*!< Regulator in main mode */ +#define PWR_LOWPOWERREGULATOR_ON PWR_CR1_LPR /*!< Regulator in low-power mode */ +/** + * @} + */ + +/** @defgroup PWR_SLEEP_mode_entry PWR SLEEP mode entry + * @{ + */ +#define PWR_SLEEPENTRY_WFI ((uint8_t)0x01) /*!< Wait For Interruption instruction to enter Sleep mode */ +#define PWR_SLEEPENTRY_WFE ((uint8_t)0x02) /*!< Wait For Event instruction to enter Sleep mode */ +/** + * @} + */ + +/** @defgroup PWR_STOP_mode_entry PWR STOP mode entry + * @{ + */ +#define PWR_STOPENTRY_WFI ((uint8_t)0x01) /*!< Wait For Interruption instruction to enter Stop mode */ +#define PWR_STOPENTRY_WFE ((uint8_t)0x02) /*!< Wait For Event instruction to enter Stop mode */ +/** + * @} + */ + + +/** @defgroup PWR_PVD_EXTI_LINE PWR PVD external interrupt line + * @{ + */ +#define PWR_EXTI_LINE_PVD ((uint32_t)0x00010000) /*!< External interrupt line 16 Connected to the PVD EXTI Line */ +/** + * @} + */ + +/** @defgroup PWR_PVD_EVENT_LINE PWR PVD event line + * @{ + */ +#define PWR_EVENT_LINE_PVD ((uint32_t)0x00010000) /*!< Event line 16 Connected to the PVD Event Line */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ +/** @defgroup PWR_Exported_Macros PWR Exported Macros + * @{ + */ + +/** @brief Check whether or not a specific PWR flag is set. + * @param __FLAG__ specifies the flag to check. + * This parameter can be one of the following values: + * @arg @ref PWR_FLAG_WUF1 Wake Up Flag 1. Indicates that a wakeup event + * was received from the WKUP pin 1. + * @arg @ref PWR_FLAG_WUF2 Wake Up Flag 2. Indicates that a wakeup event + * was received from the WKUP pin 2. + * @arg @ref PWR_FLAG_WUF3 Wake Up Flag 3. Indicates that a wakeup event + * was received from the WKUP pin 3. + * @arg @ref PWR_FLAG_WUF4 Wake Up Flag 4. Indicates that a wakeup event + * was received from the WKUP pin 4. + * @arg @ref PWR_FLAG_WUF5 Wake Up Flag 5. Indicates that a wakeup event + * was received from the WKUP pin 5. + * @arg @ref PWR_FLAG_SB StandBy Flag. Indicates that the system + * entered StandBy mode. + * @arg @ref PWR_FLAG_EXT_SMPS External SMPS Ready Flag. When available on device, indicates + * that external switch can be closed to connect to the external SMPS, when the Range 2 + * of internal regulator is ready. + * @arg @ref PWR_FLAG_WUFI Wake-Up Flag Internal. Set when a wakeup is detected on + * the internal wakeup line. + * @arg @ref PWR_FLAG_REGLPS Low Power Regulator Started. Indicates whether or not the + * low-power regulator is ready. + * @arg @ref PWR_FLAG_REGLPF Low Power Regulator Flag. Indicates whether the + * regulator is ready in main mode or is in low-power mode. + * @arg @ref PWR_FLAG_VOSF Voltage Scaling Flag. Indicates whether the regulator is ready + * in the selected voltage range or is still changing to the required voltage level. + * @arg @ref PWR_FLAG_PVDO Power Voltage Detector Output. Indicates whether VDD voltage is + * below or above the selected PVD threshold. + * @arg @ref PWR_FLAG_PVMO1 Peripheral Voltage Monitoring Output 1. Indicates whether VDDUSB voltage is + * is below or above PVM1 threshold (applicable when USB feature is supported). + @if STM32L486xx + * @arg @ref PWR_FLAG_PVMO2 Peripheral Voltage Monitoring Output 2. Indicates whether VDDIO2 voltage is + * is below or above PVM2 threshold (applicable when VDDIO2 is present on device). + @endif + * @arg @ref PWR_FLAG_PVMO3 Peripheral Voltage Monitoring Output 3. Indicates whether VDDA voltage is + * is below or above PVM3 threshold. + * @arg @ref PWR_FLAG_PVMO4 Peripheral Voltage Monitoring Output 4. Indicates whether VDDA voltage is + * is below or above PVM4 threshold. + * + * @retval The new state of __FLAG__ (TRUE or FALSE). + */ +#define __HAL_PWR_GET_FLAG(__FLAG__) ( ((((uint8_t)(__FLAG__)) >> 5U) == 1) ?\ + (PWR->SR1 & (1U << ((__FLAG__) & 31U))) :\ + (PWR->SR2 & (1U << ((__FLAG__) & 31U))) ) + +/** @brief Clear a specific PWR flag. + * @param __FLAG__ specifies the flag to clear. + * This parameter can be one of the following values: + * @arg @ref PWR_FLAG_WUF1 Wake Up Flag 1. Indicates that a wakeup event + * was received from the WKUP pin 1. + * @arg @ref PWR_FLAG_WUF2 Wake Up Flag 2. Indicates that a wakeup event + * was received from the WKUP pin 2. + * @arg @ref PWR_FLAG_WUF3 Wake Up Flag 3. Indicates that a wakeup event + * was received from the WKUP pin 3. + * @arg @ref PWR_FLAG_WUF4 Wake Up Flag 4. Indicates that a wakeup event + * was received from the WKUP pin 4. + * @arg @ref PWR_FLAG_WUF5 Wake Up Flag 5. Indicates that a wakeup event + * was received from the WKUP pin 5. + * @arg @ref PWR_FLAG_WU Encompasses all five Wake Up Flags. + * @arg @ref PWR_FLAG_SB Standby Flag. Indicates that the system + * entered Standby mode. + * @retval None + */ +#define __HAL_PWR_CLEAR_FLAG(__FLAG__) ( (((uint8_t)(__FLAG__)) == PWR_FLAG_WU) ?\ + (PWR->SCR = (__FLAG__)) :\ + (PWR->SCR = (1U << ((__FLAG__) & 31U))) ) +/** + * @brief Enable the PVD Extended Interrupt Line. + * @retval None + */ +#define __HAL_PWR_PVD_EXTI_ENABLE_IT() SET_BIT(EXTI->IMR1, PWR_EXTI_LINE_PVD) + +/** + * @brief Disable the PVD Extended Interrupt Line. + * @retval None + */ +#define __HAL_PWR_PVD_EXTI_DISABLE_IT() CLEAR_BIT(EXTI->IMR1, PWR_EXTI_LINE_PVD) + +/** + * @brief Enable the PVD Event Line. + * @retval None + */ +#define __HAL_PWR_PVD_EXTI_ENABLE_EVENT() SET_BIT(EXTI->EMR1, PWR_EVENT_LINE_PVD) + +/** + * @brief Disable the PVD Event Line. + * @retval None + */ +#define __HAL_PWR_PVD_EXTI_DISABLE_EVENT() CLEAR_BIT(EXTI->EMR1, PWR_EVENT_LINE_PVD) + +/** + * @brief Enable the PVD Extended Interrupt Rising Trigger. + * @retval None + */ +#define __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE() SET_BIT(EXTI->RTSR1, PWR_EXTI_LINE_PVD) + +/** + * @brief Disable the PVD Extended Interrupt Rising Trigger. + * @retval None + */ +#define __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE() CLEAR_BIT(EXTI->RTSR1, PWR_EXTI_LINE_PVD) + +/** + * @brief Enable the PVD Extended Interrupt Falling Trigger. + * @retval None + */ +#define __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE() SET_BIT(EXTI->FTSR1, PWR_EXTI_LINE_PVD) + + +/** + * @brief Disable the PVD Extended Interrupt Falling Trigger. + * @retval None + */ +#define __HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE() CLEAR_BIT(EXTI->FTSR1, PWR_EXTI_LINE_PVD) + + +/** + * @brief Enable the PVD Extended Interrupt Rising & Falling Trigger. + * @retval None + */ +#define __HAL_PWR_PVD_EXTI_ENABLE_RISING_FALLING_EDGE() \ + do { \ + __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE(); \ + __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE(); \ + } while(0) + +/** + * @brief Disable the PVD Extended Interrupt Rising & Falling Trigger. + * @retval None + */ +#define __HAL_PWR_PVD_EXTI_DISABLE_RISING_FALLING_EDGE() \ + do { \ + __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE(); \ + __HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE(); \ + } while(0) + +/** + * @brief Generate a Software interrupt on selected EXTI line. + * @retval None + */ +#define __HAL_PWR_PVD_EXTI_GENERATE_SWIT() SET_BIT(EXTI->SWIER1, PWR_EXTI_LINE_PVD) + +/** + * @brief Check whether or not the PVD EXTI interrupt flag is set. + * @retval EXTI PVD Line Status. + */ +#define __HAL_PWR_PVD_EXTI_GET_FLAG() (EXTI->PR1 & PWR_EXTI_LINE_PVD) + +/** + * @brief Clear the PVD EXTI interrupt flag. + * @retval None + */ +#define __HAL_PWR_PVD_EXTI_CLEAR_FLAG() WRITE_REG(EXTI->PR1, PWR_EXTI_LINE_PVD) + +/** + * @} + */ + + +/* Private macros --------------------------------------------------------*/ +/** @addtogroup PWR_Private_Macros PWR Private Macros + * @{ + */ + +#define IS_PWR_PVD_LEVEL(LEVEL) (((LEVEL) == PWR_PVDLEVEL_0) || ((LEVEL) == PWR_PVDLEVEL_1)|| \ + ((LEVEL) == PWR_PVDLEVEL_2) || ((LEVEL) == PWR_PVDLEVEL_3)|| \ + ((LEVEL) == PWR_PVDLEVEL_4) || ((LEVEL) == PWR_PVDLEVEL_5)|| \ + ((LEVEL) == PWR_PVDLEVEL_6) || ((LEVEL) == PWR_PVDLEVEL_7)) + +#define IS_PWR_PVD_MODE(MODE) (((MODE) == PWR_PVD_MODE_NORMAL) ||\ + ((MODE) == PWR_PVD_MODE_IT_RISING) ||\ + ((MODE) == PWR_PVD_MODE_IT_FALLING) ||\ + ((MODE) == PWR_PVD_MODE_IT_RISING_FALLING) ||\ + ((MODE) == PWR_PVD_MODE_EVENT_RISING) ||\ + ((MODE) == PWR_PVD_MODE_EVENT_FALLING) ||\ + ((MODE) == PWR_PVD_MODE_EVENT_RISING_FALLING)) + +#define IS_PWR_REGULATOR(REGULATOR) (((REGULATOR) == PWR_MAINREGULATOR_ON) || \ + ((REGULATOR) == PWR_LOWPOWERREGULATOR_ON)) + +#define IS_PWR_SLEEP_ENTRY(ENTRY) (((ENTRY) == PWR_SLEEPENTRY_WFI) || ((ENTRY) == PWR_SLEEPENTRY_WFE)) + +#define IS_PWR_STOP_ENTRY(ENTRY) (((ENTRY) == PWR_STOPENTRY_WFI) || ((ENTRY) == PWR_STOPENTRY_WFE) ) + +/** + * @} + */ + +/* Include PWR HAL Extended module */ +#include "stm32l4xx_hal_pwr_ex.h" + +/* Exported functions --------------------------------------------------------*/ + +/** @addtogroup PWR_Exported_Functions PWR Exported Functions + * @{ + */ + +/** @addtogroup PWR_Exported_Functions_Group1 Initialization and de-initialization functions + * @{ + */ + +/* Initialization and de-initialization functions *******************************/ +void HAL_PWR_DeInit(void); +void HAL_PWR_EnableBkUpAccess(void); +void HAL_PWR_DisableBkUpAccess(void); + +/** + * @} + */ + +/** @addtogroup PWR_Exported_Functions_Group2 Peripheral Control functions + * @{ + */ + +/* Peripheral Control functions ************************************************/ +HAL_StatusTypeDef HAL_PWR_ConfigPVD(PWR_PVDTypeDef *sConfigPVD); +void HAL_PWR_EnablePVD(void); +void HAL_PWR_DisablePVD(void); + + +/* WakeUp pins configuration functions ****************************************/ +void HAL_PWR_EnableWakeUpPin(uint32_t WakeUpPinPolarity); +void HAL_PWR_DisableWakeUpPin(uint32_t WakeUpPinx); + +/* Low Power modes configuration functions ************************************/ +void HAL_PWR_EnterSLEEPMode(uint32_t Regulator, uint8_t SLEEPEntry); +void HAL_PWR_EnterSTOPMode(uint32_t Regulator, uint8_t STOPEntry); +void HAL_PWR_EnterSTANDBYMode(void); + +void HAL_PWR_EnableSleepOnExit(void); +void HAL_PWR_DisableSleepOnExit(void); +void HAL_PWR_EnableSEVOnPend(void); +void HAL_PWR_DisableSEVOnPend(void); + +void HAL_PWR_PVDCallback(void); + + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + + +#endif /* STM32L4xx_HAL_PWR_H */ diff --git a/CablePositioning_IAP_V1.0/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_pwr_ex.h b/CablePositioning_IAP_V1.0/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_pwr_ex.h index f228f22..71dbbb3 100644 --- a/CablePositioning_IAP_V1.0/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_pwr_ex.h +++ b/CablePositioning_IAP_V1.0/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_pwr_ex.h @@ -1,929 +1,929 @@ -/** - ****************************************************************************** - * @file stm32l4xx_hal_pwr_ex.h - * @author MCD Application Team - * @brief Header file of PWR HAL Extended module. - ****************************************************************************** - * @attention - * - * Copyright (c) 2017 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef STM32L4xx_HAL_PWR_EX_H -#define STM32L4xx_HAL_PWR_EX_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32l4xx_hal_def.h" - -/** @addtogroup STM32L4xx_HAL_Driver - * @{ - */ - -/** @addtogroup PWREx - * @{ - */ - - -/* Exported types ------------------------------------------------------------*/ - -/** @defgroup PWREx_Exported_Types PWR Extended Exported Types - * @{ - */ - - -/** - * @brief PWR PVM configuration structure definition - */ -typedef struct -{ - uint32_t PVMType; /*!< PVMType: Specifies which voltage is monitored and against which threshold. - This parameter can be a value of @ref PWREx_PVM_Type. - @arg @ref PWR_PVM_1 Peripheral Voltage Monitoring 1 enable: VDDUSB versus 1.2 V (applicable when USB feature is supported). -@if STM32L486xx - @arg @ref PWR_PVM_2 Peripheral Voltage Monitoring 2 enable: VDDIO2 versus 0.9 V (applicable when VDDIO2 is present on device). -@endif - @arg @ref PWR_PVM_3 Peripheral Voltage Monitoring 3 enable: VDDA versus 1.62 V. - @arg @ref PWR_PVM_4 Peripheral Voltage Monitoring 4 enable: VDDA versus 2.2 V. */ - - uint32_t Mode; /*!< Mode: Specifies the operating mode for the selected pins. - This parameter can be a value of @ref PWREx_PVM_Mode. */ -}PWR_PVMTypeDef; - -/** - * @} - */ - -/* Exported constants --------------------------------------------------------*/ - -/** @defgroup PWREx_Exported_Constants PWR Extended Exported Constants - * @{ - */ - -/** @defgroup PWREx_WUP_Polarity Shift to apply to retrieve polarity information from PWR_WAKEUP_PINy_xxx constants - * @{ - */ -#define PWR_WUP_POLARITY_SHIFT 0x05 /*!< Internal constant used to retrieve wakeup pin polariry */ -/** - * @} - */ - - -/** @defgroup PWREx_WakeUp_Pins PWR wake-up pins - * @{ - */ -#define PWR_WAKEUP_PIN1 PWR_CR3_EWUP1 /*!< Wakeup pin 1 (with high level polarity) */ -#define PWR_WAKEUP_PIN2 PWR_CR3_EWUP2 /*!< Wakeup pin 2 (with high level polarity) */ -#define PWR_WAKEUP_PIN3 PWR_CR3_EWUP3 /*!< Wakeup pin 3 (with high level polarity) */ -#define PWR_WAKEUP_PIN4 PWR_CR3_EWUP4 /*!< Wakeup pin 4 (with high level polarity) */ -#define PWR_WAKEUP_PIN5 PWR_CR3_EWUP5 /*!< Wakeup pin 5 (with high level polarity) */ -#define PWR_WAKEUP_PIN1_HIGH PWR_CR3_EWUP1 /*!< Wakeup pin 1 (with high level polarity) */ -#define PWR_WAKEUP_PIN2_HIGH PWR_CR3_EWUP2 /*!< Wakeup pin 2 (with high level polarity) */ -#define PWR_WAKEUP_PIN3_HIGH PWR_CR3_EWUP3 /*!< Wakeup pin 3 (with high level polarity) */ -#define PWR_WAKEUP_PIN4_HIGH PWR_CR3_EWUP4 /*!< Wakeup pin 4 (with high level polarity) */ -#define PWR_WAKEUP_PIN5_HIGH PWR_CR3_EWUP5 /*!< Wakeup pin 5 (with high level polarity) */ -#define PWR_WAKEUP_PIN1_LOW (uint32_t)((PWR_CR4_WP1<IMR2, PWR_EXTI_LINE_PVM1) - -/** - * @brief Disable the PVM1 Extended Interrupt Line. - * @retval None - */ -#define __HAL_PWR_PVM1_EXTI_DISABLE_IT() CLEAR_BIT(EXTI->IMR2, PWR_EXTI_LINE_PVM1) - -/** - * @brief Enable the PVM1 Event Line. - * @retval None - */ -#define __HAL_PWR_PVM1_EXTI_ENABLE_EVENT() SET_BIT(EXTI->EMR2, PWR_EVENT_LINE_PVM1) - -/** - * @brief Disable the PVM1 Event Line. - * @retval None - */ -#define __HAL_PWR_PVM1_EXTI_DISABLE_EVENT() CLEAR_BIT(EXTI->EMR2, PWR_EVENT_LINE_PVM1) - -/** - * @brief Enable the PVM1 Extended Interrupt Rising Trigger. - * @retval None - */ -#define __HAL_PWR_PVM1_EXTI_ENABLE_RISING_EDGE() SET_BIT(EXTI->RTSR2, PWR_EXTI_LINE_PVM1) - -/** - * @brief Disable the PVM1 Extended Interrupt Rising Trigger. - * @retval None - */ -#define __HAL_PWR_PVM1_EXTI_DISABLE_RISING_EDGE() CLEAR_BIT(EXTI->RTSR2, PWR_EXTI_LINE_PVM1) - -/** - * @brief Enable the PVM1 Extended Interrupt Falling Trigger. - * @retval None - */ -#define __HAL_PWR_PVM1_EXTI_ENABLE_FALLING_EDGE() SET_BIT(EXTI->FTSR2, PWR_EXTI_LINE_PVM1) - - -/** - * @brief Disable the PVM1 Extended Interrupt Falling Trigger. - * @retval None - */ -#define __HAL_PWR_PVM1_EXTI_DISABLE_FALLING_EDGE() CLEAR_BIT(EXTI->FTSR2, PWR_EXTI_LINE_PVM1) - - -/** - * @brief PVM1 EXTI line configuration: set rising & falling edge trigger. - * @retval None - */ -#define __HAL_PWR_PVM1_EXTI_ENABLE_RISING_FALLING_EDGE() \ - do { \ - __HAL_PWR_PVM1_EXTI_ENABLE_RISING_EDGE(); \ - __HAL_PWR_PVM1_EXTI_ENABLE_FALLING_EDGE(); \ - } while(0) - -/** - * @brief Disable the PVM1 Extended Interrupt Rising & Falling Trigger. - * @retval None - */ -#define __HAL_PWR_PVM1_EXTI_DISABLE_RISING_FALLING_EDGE() \ - do { \ - __HAL_PWR_PVM1_EXTI_DISABLE_RISING_EDGE(); \ - __HAL_PWR_PVM1_EXTI_DISABLE_FALLING_EDGE(); \ - } while(0) - -/** - * @brief Generate a Software interrupt on selected EXTI line. - * @retval None - */ -#define __HAL_PWR_PVM1_EXTI_GENERATE_SWIT() SET_BIT(EXTI->SWIER2, PWR_EXTI_LINE_PVM1) - -/** - * @brief Check whether the specified PVM1 EXTI interrupt flag is set or not. - * @retval EXTI PVM1 Line Status. - */ -#define __HAL_PWR_PVM1_EXTI_GET_FLAG() (EXTI->PR2 & PWR_EXTI_LINE_PVM1) - -/** - * @brief Clear the PVM1 EXTI flag. - * @retval None - */ -#define __HAL_PWR_PVM1_EXTI_CLEAR_FLAG() WRITE_REG(EXTI->PR2, PWR_EXTI_LINE_PVM1) - -#endif /* PWR_CR2_PVME1 */ - - -#if defined(PWR_CR2_PVME2) -/** - * @brief Enable the PVM2 Extended Interrupt Line. - * @retval None - */ -#define __HAL_PWR_PVM2_EXTI_ENABLE_IT() SET_BIT(EXTI->IMR2, PWR_EXTI_LINE_PVM2) - -/** - * @brief Disable the PVM2 Extended Interrupt Line. - * @retval None - */ -#define __HAL_PWR_PVM2_EXTI_DISABLE_IT() CLEAR_BIT(EXTI->IMR2, PWR_EXTI_LINE_PVM2) - -/** - * @brief Enable the PVM2 Event Line. - * @retval None - */ -#define __HAL_PWR_PVM2_EXTI_ENABLE_EVENT() SET_BIT(EXTI->EMR2, PWR_EVENT_LINE_PVM2) - -/** - * @brief Disable the PVM2 Event Line. - * @retval None - */ -#define __HAL_PWR_PVM2_EXTI_DISABLE_EVENT() CLEAR_BIT(EXTI->EMR2, PWR_EVENT_LINE_PVM2) - -/** - * @brief Enable the PVM2 Extended Interrupt Rising Trigger. - * @retval None - */ -#define __HAL_PWR_PVM2_EXTI_ENABLE_RISING_EDGE() SET_BIT(EXTI->RTSR2, PWR_EXTI_LINE_PVM2) - -/** - * @brief Disable the PVM2 Extended Interrupt Rising Trigger. - * @retval None - */ -#define __HAL_PWR_PVM2_EXTI_DISABLE_RISING_EDGE() CLEAR_BIT(EXTI->RTSR2, PWR_EXTI_LINE_PVM2) - -/** - * @brief Enable the PVM2 Extended Interrupt Falling Trigger. - * @retval None - */ -#define __HAL_PWR_PVM2_EXTI_ENABLE_FALLING_EDGE() SET_BIT(EXTI->FTSR2, PWR_EXTI_LINE_PVM2) - - -/** - * @brief Disable the PVM2 Extended Interrupt Falling Trigger. - * @retval None - */ -#define __HAL_PWR_PVM2_EXTI_DISABLE_FALLING_EDGE() CLEAR_BIT(EXTI->FTSR2, PWR_EXTI_LINE_PVM2) - - -/** - * @brief PVM2 EXTI line configuration: set rising & falling edge trigger. - * @retval None - */ -#define __HAL_PWR_PVM2_EXTI_ENABLE_RISING_FALLING_EDGE() \ - do { \ - __HAL_PWR_PVM2_EXTI_ENABLE_RISING_EDGE(); \ - __HAL_PWR_PVM2_EXTI_ENABLE_FALLING_EDGE(); \ - } while(0) - -/** - * @brief Disable the PVM2 Extended Interrupt Rising & Falling Trigger. - * @retval None - */ -#define __HAL_PWR_PVM2_EXTI_DISABLE_RISING_FALLING_EDGE() \ - do { \ - __HAL_PWR_PVM2_EXTI_DISABLE_RISING_EDGE(); \ - __HAL_PWR_PVM2_EXTI_DISABLE_FALLING_EDGE(); \ - } while(0) - -/** - * @brief Generate a Software interrupt on selected EXTI line. - * @retval None - */ -#define __HAL_PWR_PVM2_EXTI_GENERATE_SWIT() SET_BIT(EXTI->SWIER2, PWR_EXTI_LINE_PVM2) - -/** - * @brief Check whether the specified PVM2 EXTI interrupt flag is set or not. - * @retval EXTI PVM2 Line Status. - */ -#define __HAL_PWR_PVM2_EXTI_GET_FLAG() (EXTI->PR2 & PWR_EXTI_LINE_PVM2) - -/** - * @brief Clear the PVM2 EXTI flag. - * @retval None - */ -#define __HAL_PWR_PVM2_EXTI_CLEAR_FLAG() WRITE_REG(EXTI->PR2, PWR_EXTI_LINE_PVM2) - -#endif /* PWR_CR2_PVME2 */ - - -/** - * @brief Enable the PVM3 Extended Interrupt Line. - * @retval None - */ -#define __HAL_PWR_PVM3_EXTI_ENABLE_IT() SET_BIT(EXTI->IMR2, PWR_EXTI_LINE_PVM3) - -/** - * @brief Disable the PVM3 Extended Interrupt Line. - * @retval None - */ -#define __HAL_PWR_PVM3_EXTI_DISABLE_IT() CLEAR_BIT(EXTI->IMR2, PWR_EXTI_LINE_PVM3) - -/** - * @brief Enable the PVM3 Event Line. - * @retval None - */ -#define __HAL_PWR_PVM3_EXTI_ENABLE_EVENT() SET_BIT(EXTI->EMR2, PWR_EVENT_LINE_PVM3) - -/** - * @brief Disable the PVM3 Event Line. - * @retval None - */ -#define __HAL_PWR_PVM3_EXTI_DISABLE_EVENT() CLEAR_BIT(EXTI->EMR2, PWR_EVENT_LINE_PVM3) - -/** - * @brief Enable the PVM3 Extended Interrupt Rising Trigger. - * @retval None - */ -#define __HAL_PWR_PVM3_EXTI_ENABLE_RISING_EDGE() SET_BIT(EXTI->RTSR2, PWR_EXTI_LINE_PVM3) - -/** - * @brief Disable the PVM3 Extended Interrupt Rising Trigger. - * @retval None - */ -#define __HAL_PWR_PVM3_EXTI_DISABLE_RISING_EDGE() CLEAR_BIT(EXTI->RTSR2, PWR_EXTI_LINE_PVM3) - -/** - * @brief Enable the PVM3 Extended Interrupt Falling Trigger. - * @retval None - */ -#define __HAL_PWR_PVM3_EXTI_ENABLE_FALLING_EDGE() SET_BIT(EXTI->FTSR2, PWR_EXTI_LINE_PVM3) - - -/** - * @brief Disable the PVM3 Extended Interrupt Falling Trigger. - * @retval None - */ -#define __HAL_PWR_PVM3_EXTI_DISABLE_FALLING_EDGE() CLEAR_BIT(EXTI->FTSR2, PWR_EXTI_LINE_PVM3) - - -/** - * @brief PVM3 EXTI line configuration: set rising & falling edge trigger. - * @retval None - */ -#define __HAL_PWR_PVM3_EXTI_ENABLE_RISING_FALLING_EDGE() \ - do { \ - __HAL_PWR_PVM3_EXTI_ENABLE_RISING_EDGE(); \ - __HAL_PWR_PVM3_EXTI_ENABLE_FALLING_EDGE(); \ - } while(0) - -/** - * @brief Disable the PVM3 Extended Interrupt Rising & Falling Trigger. - * @retval None - */ -#define __HAL_PWR_PVM3_EXTI_DISABLE_RISING_FALLING_EDGE() \ - do { \ - __HAL_PWR_PVM3_EXTI_DISABLE_RISING_EDGE(); \ - __HAL_PWR_PVM3_EXTI_DISABLE_FALLING_EDGE(); \ - } while(0) - -/** - * @brief Generate a Software interrupt on selected EXTI line. - * @retval None - */ -#define __HAL_PWR_PVM3_EXTI_GENERATE_SWIT() SET_BIT(EXTI->SWIER2, PWR_EXTI_LINE_PVM3) - -/** - * @brief Check whether the specified PVM3 EXTI interrupt flag is set or not. - * @retval EXTI PVM3 Line Status. - */ -#define __HAL_PWR_PVM3_EXTI_GET_FLAG() (EXTI->PR2 & PWR_EXTI_LINE_PVM3) - -/** - * @brief Clear the PVM3 EXTI flag. - * @retval None - */ -#define __HAL_PWR_PVM3_EXTI_CLEAR_FLAG() WRITE_REG(EXTI->PR2, PWR_EXTI_LINE_PVM3) - - - - -/** - * @brief Enable the PVM4 Extended Interrupt Line. - * @retval None - */ -#define __HAL_PWR_PVM4_EXTI_ENABLE_IT() SET_BIT(EXTI->IMR2, PWR_EXTI_LINE_PVM4) - -/** - * @brief Disable the PVM4 Extended Interrupt Line. - * @retval None - */ -#define __HAL_PWR_PVM4_EXTI_DISABLE_IT() CLEAR_BIT(EXTI->IMR2, PWR_EXTI_LINE_PVM4) - -/** - * @brief Enable the PVM4 Event Line. - * @retval None - */ -#define __HAL_PWR_PVM4_EXTI_ENABLE_EVENT() SET_BIT(EXTI->EMR2, PWR_EVENT_LINE_PVM4) - -/** - * @brief Disable the PVM4 Event Line. - * @retval None - */ -#define __HAL_PWR_PVM4_EXTI_DISABLE_EVENT() CLEAR_BIT(EXTI->EMR2, PWR_EVENT_LINE_PVM4) - -/** - * @brief Enable the PVM4 Extended Interrupt Rising Trigger. - * @retval None - */ -#define __HAL_PWR_PVM4_EXTI_ENABLE_RISING_EDGE() SET_BIT(EXTI->RTSR2, PWR_EXTI_LINE_PVM4) - -/** - * @brief Disable the PVM4 Extended Interrupt Rising Trigger. - * @retval None - */ -#define __HAL_PWR_PVM4_EXTI_DISABLE_RISING_EDGE() CLEAR_BIT(EXTI->RTSR2, PWR_EXTI_LINE_PVM4) - -/** - * @brief Enable the PVM4 Extended Interrupt Falling Trigger. - * @retval None - */ -#define __HAL_PWR_PVM4_EXTI_ENABLE_FALLING_EDGE() SET_BIT(EXTI->FTSR2, PWR_EXTI_LINE_PVM4) - - -/** - * @brief Disable the PVM4 Extended Interrupt Falling Trigger. - * @retval None - */ -#define __HAL_PWR_PVM4_EXTI_DISABLE_FALLING_EDGE() CLEAR_BIT(EXTI->FTSR2, PWR_EXTI_LINE_PVM4) - - -/** - * @brief PVM4 EXTI line configuration: set rising & falling edge trigger. - * @retval None - */ -#define __HAL_PWR_PVM4_EXTI_ENABLE_RISING_FALLING_EDGE() \ - do { \ - __HAL_PWR_PVM4_EXTI_ENABLE_RISING_EDGE(); \ - __HAL_PWR_PVM4_EXTI_ENABLE_FALLING_EDGE(); \ - } while(0) - -/** - * @brief Disable the PVM4 Extended Interrupt Rising & Falling Trigger. - * @retval None - */ -#define __HAL_PWR_PVM4_EXTI_DISABLE_RISING_FALLING_EDGE() \ - do { \ - __HAL_PWR_PVM4_EXTI_DISABLE_RISING_EDGE(); \ - __HAL_PWR_PVM4_EXTI_DISABLE_FALLING_EDGE(); \ - } while(0) - -/** - * @brief Generate a Software interrupt on selected EXTI line. - * @retval None - */ -#define __HAL_PWR_PVM4_EXTI_GENERATE_SWIT() SET_BIT(EXTI->SWIER2, PWR_EXTI_LINE_PVM4) - -/** - * @brief Check whether or not the specified PVM4 EXTI interrupt flag is set. - * @retval EXTI PVM4 Line Status. - */ -#define __HAL_PWR_PVM4_EXTI_GET_FLAG() (EXTI->PR2 & PWR_EXTI_LINE_PVM4) - -/** - * @brief Clear the PVM4 EXTI flag. - * @retval None - */ -#define __HAL_PWR_PVM4_EXTI_CLEAR_FLAG() WRITE_REG(EXTI->PR2, PWR_EXTI_LINE_PVM4) - - -/** - * @brief Configure the main internal regulator output voltage. - * @param __REGULATOR__ specifies the regulator output voltage to achieve - * a tradeoff between performance and power consumption. - * This parameter can be one of the following values: - * @arg @ref PWR_REGULATOR_VOLTAGE_SCALE1 Regulator voltage output range 1 mode, - * typical output voltage at 1.2 V, - * system frequency up to 80 MHz. - * @arg @ref PWR_REGULATOR_VOLTAGE_SCALE2 Regulator voltage output range 2 mode, - * typical output voltage at 1.0 V, - * system frequency up to 26 MHz. - * @note This macro is similar to HAL_PWREx_ControlVoltageScaling() API but doesn't check - * whether or not VOSF flag is cleared when moving from range 2 to range 1. User - * may resort to __HAL_PWR_GET_FLAG() macro to check VOSF bit resetting. - * @retval None - */ -#define __HAL_PWR_VOLTAGESCALING_CONFIG(__REGULATOR__) do { \ - __IO uint32_t tmpreg; \ - MODIFY_REG(PWR->CR1, PWR_CR1_VOS, (__REGULATOR__)); \ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(PWR->CR1, PWR_CR1_VOS); \ - UNUSED(tmpreg); \ - } while(0) - -/** - * @} - */ - -/* Private macros --------------------------------------------------------*/ -/** @addtogroup PWREx_Private_Macros PWR Extended Private Macros - * @{ - */ - -#define IS_PWR_WAKEUP_PIN(PIN) (((PIN) == PWR_WAKEUP_PIN1) || \ - ((PIN) == PWR_WAKEUP_PIN2) || \ - ((PIN) == PWR_WAKEUP_PIN3) || \ - ((PIN) == PWR_WAKEUP_PIN4) || \ - ((PIN) == PWR_WAKEUP_PIN5) || \ - ((PIN) == PWR_WAKEUP_PIN1_HIGH) || \ - ((PIN) == PWR_WAKEUP_PIN2_HIGH) || \ - ((PIN) == PWR_WAKEUP_PIN3_HIGH) || \ - ((PIN) == PWR_WAKEUP_PIN4_HIGH) || \ - ((PIN) == PWR_WAKEUP_PIN5_HIGH) || \ - ((PIN) == PWR_WAKEUP_PIN1_LOW) || \ - ((PIN) == PWR_WAKEUP_PIN2_LOW) || \ - ((PIN) == PWR_WAKEUP_PIN3_LOW) || \ - ((PIN) == PWR_WAKEUP_PIN4_LOW) || \ - ((PIN) == PWR_WAKEUP_PIN5_LOW)) - -#if defined (STM32L475xx) || defined (STM32L476xx) || defined (STM32L485xx) || defined (STM32L486xx) || \ - defined (STM32L496xx) || defined (STM32L4A6xx) || \ - defined (STM32L4P5xx) || defined (STM32L4Q5xx) || \ - defined (STM32L4R5xx) || defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined (STM32L4S9xx) -#define IS_PWR_PVM_TYPE(TYPE) (((TYPE) == PWR_PVM_1) ||\ - ((TYPE) == PWR_PVM_2) ||\ - ((TYPE) == PWR_PVM_3) ||\ - ((TYPE) == PWR_PVM_4)) -#elif defined (STM32L471xx) -#define IS_PWR_PVM_TYPE(TYPE) (((TYPE) == PWR_PVM_2) ||\ - ((TYPE) == PWR_PVM_3) ||\ - ((TYPE) == PWR_PVM_4)) -#endif - -#if defined (STM32L412xx) || defined (STM32L422xx) || defined (STM32L433xx) || defined (STM32L443xx) || defined (STM32L452xx) || defined (STM32L462xx) -#define IS_PWR_PVM_TYPE(TYPE) (((TYPE) == PWR_PVM_1) ||\ - ((TYPE) == PWR_PVM_3) ||\ - ((TYPE) == PWR_PVM_4)) -#elif defined (STM32L431xx) || defined (STM32L432xx) || defined (STM32L442xx) || defined (STM32L451xx) -#define IS_PWR_PVM_TYPE(TYPE) (((TYPE) == PWR_PVM_3) ||\ - ((TYPE) == PWR_PVM_4)) -#endif - -#define IS_PWR_PVM_MODE(MODE) (((MODE) == PWR_PVM_MODE_NORMAL) ||\ - ((MODE) == PWR_PVM_MODE_IT_RISING) ||\ - ((MODE) == PWR_PVM_MODE_IT_FALLING) ||\ - ((MODE) == PWR_PVM_MODE_IT_RISING_FALLING) ||\ - ((MODE) == PWR_PVM_MODE_EVENT_RISING) ||\ - ((MODE) == PWR_PVM_MODE_EVENT_FALLING) ||\ - ((MODE) == PWR_PVM_MODE_EVENT_RISING_FALLING)) - -#if defined(PWR_CR5_R1MODE) -#define IS_PWR_VOLTAGE_SCALING_RANGE(RANGE) (((RANGE) == PWR_REGULATOR_VOLTAGE_SCALE1_BOOST) || \ - ((RANGE) == PWR_REGULATOR_VOLTAGE_SCALE1) || \ - ((RANGE) == PWR_REGULATOR_VOLTAGE_SCALE2)) -#else -#define IS_PWR_VOLTAGE_SCALING_RANGE(RANGE) (((RANGE) == PWR_REGULATOR_VOLTAGE_SCALE1) || \ - ((RANGE) == PWR_REGULATOR_VOLTAGE_SCALE2)) -#endif - - -#define IS_PWR_BATTERY_RESISTOR_SELECT(RESISTOR) (((RESISTOR) == PWR_BATTERY_CHARGING_RESISTOR_5) ||\ - ((RESISTOR) == PWR_BATTERY_CHARGING_RESISTOR_1_5)) - -#define IS_PWR_BATTERY_CHARGING(CHARGING) (((CHARGING) == PWR_BATTERY_CHARGING_DISABLE) ||\ - ((CHARGING) == PWR_BATTERY_CHARGING_ENABLE)) - -#define IS_PWR_GPIO_BIT_NUMBER(BIT_NUMBER) (((BIT_NUMBER) & GPIO_PIN_MASK) != (uint32_t)0x00) - - -#if defined (STM32L412xx) || defined (STM32L422xx) -#define IS_PWR_GPIO(GPIO) (((GPIO) == PWR_GPIO_A) ||\ - ((GPIO) == PWR_GPIO_B) ||\ - ((GPIO) == PWR_GPIO_C) ||\ - ((GPIO) == PWR_GPIO_D) ||\ - ((GPIO) == PWR_GPIO_H)) -#elif defined (STM32L431xx) || defined (STM32L433xx) || defined (STM32L443xx) || \ - defined (STM32L451xx) || defined (STM32L452xx) || defined (STM32L462xx) -#define IS_PWR_GPIO(GPIO) (((GPIO) == PWR_GPIO_A) ||\ - ((GPIO) == PWR_GPIO_B) ||\ - ((GPIO) == PWR_GPIO_C) ||\ - ((GPIO) == PWR_GPIO_D) ||\ - ((GPIO) == PWR_GPIO_E) ||\ - ((GPIO) == PWR_GPIO_H)) -#elif defined (STM32L432xx) || defined (STM32L442xx) -#define IS_PWR_GPIO(GPIO) (((GPIO) == PWR_GPIO_A) ||\ - ((GPIO) == PWR_GPIO_B) ||\ - ((GPIO) == PWR_GPIO_C) ||\ - ((GPIO) == PWR_GPIO_H)) -#elif defined (STM32L471xx) || defined (STM32L475xx) || defined (STM32L476xx) || defined (STM32L485xx) || defined (STM32L486xx) -#define IS_PWR_GPIO(GPIO) (((GPIO) == PWR_GPIO_A) ||\ - ((GPIO) == PWR_GPIO_B) ||\ - ((GPIO) == PWR_GPIO_C) ||\ - ((GPIO) == PWR_GPIO_D) ||\ - ((GPIO) == PWR_GPIO_E) ||\ - ((GPIO) == PWR_GPIO_F) ||\ - ((GPIO) == PWR_GPIO_G) ||\ - ((GPIO) == PWR_GPIO_H)) -#elif defined (STM32L496xx) || defined (STM32L4A6xx) || \ - defined (STM32L4P5xx) || defined (STM32L4Q5xx) || \ - defined (STM32L4R5xx) || defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined (STM32L4S9xx) -#define IS_PWR_GPIO(GPIO) (((GPIO) == PWR_GPIO_A) ||\ - ((GPIO) == PWR_GPIO_B) ||\ - ((GPIO) == PWR_GPIO_C) ||\ - ((GPIO) == PWR_GPIO_D) ||\ - ((GPIO) == PWR_GPIO_E) ||\ - ((GPIO) == PWR_GPIO_F) ||\ - ((GPIO) == PWR_GPIO_G) ||\ - ((GPIO) == PWR_GPIO_H) ||\ - ((GPIO) == PWR_GPIO_I)) -#endif - -#if defined (STM32L4P5xx) || defined (STM32L4Q5xx) -#define IS_PWR_SRAM2_RETENTION(SRAM2) (((SRAM2) == PWR_NO_SRAM2_RETENTION) ||\ - ((SRAM2) == PWR_FULL_SRAM2_RETENTION) ||\ - ((SRAM2) == PWR_4KBYTES_SRAM2_RETENTION)) -#else -#define IS_PWR_SRAM2_RETENTION(SRAM2) (((SRAM2) == PWR_NO_SRAM2_RETENTION) ||\ - ((SRAM2) == PWR_FULL_SRAM2_RETENTION)) -#endif - -/** - * @} - */ - - -/** @addtogroup PWREx_Exported_Functions PWR Extended Exported Functions - * @{ - */ - -/** @addtogroup PWREx_Exported_Functions_Group1 Extended Peripheral Control functions - * @{ - */ - - -/* Peripheral Control functions **********************************************/ -uint32_t HAL_PWREx_GetVoltageRange(void); -HAL_StatusTypeDef HAL_PWREx_ControlVoltageScaling(uint32_t VoltageScaling); -void HAL_PWREx_EnableBatteryCharging(uint32_t ResistorSelection); -void HAL_PWREx_DisableBatteryCharging(void); -#if defined(PWR_CR2_USV) -void HAL_PWREx_EnableVddUSB(void); -void HAL_PWREx_DisableVddUSB(void); -#endif /* PWR_CR2_USV */ -#if defined(PWR_CR2_IOSV) -void HAL_PWREx_EnableVddIO2(void); -void HAL_PWREx_DisableVddIO2(void); -#endif /* PWR_CR2_IOSV */ -void HAL_PWREx_EnableInternalWakeUpLine(void); -void HAL_PWREx_DisableInternalWakeUpLine(void); -HAL_StatusTypeDef HAL_PWREx_EnableGPIOPullUp(uint32_t GPIO, uint32_t GPIONumber); -HAL_StatusTypeDef HAL_PWREx_DisableGPIOPullUp(uint32_t GPIO, uint32_t GPIONumber); -HAL_StatusTypeDef HAL_PWREx_EnableGPIOPullDown(uint32_t GPIO, uint32_t GPIONumber); -HAL_StatusTypeDef HAL_PWREx_DisableGPIOPullDown(uint32_t GPIO, uint32_t GPIONumber); -void HAL_PWREx_EnablePullUpPullDownConfig(void); -void HAL_PWREx_DisablePullUpPullDownConfig(void); -void HAL_PWREx_EnableSRAM2ContentRetention(void); -void HAL_PWREx_DisableSRAM2ContentRetention(void); -HAL_StatusTypeDef HAL_PWREx_SetSRAM2ContentRetention(uint32_t SRAM2Size); -#if defined(PWR_CR1_RRSTP) -void HAL_PWREx_EnableSRAM3ContentRetention(void); -void HAL_PWREx_DisableSRAM3ContentRetention(void); -#endif /* PWR_CR1_RRSTP */ -#if defined(PWR_CR3_DSIPDEN) -void HAL_PWREx_EnableDSIPinsPDActivation(void); -void HAL_PWREx_DisableDSIPinsPDActivation(void); -#endif /* PWR_CR3_DSIPDEN */ -#if defined(PWR_CR2_PVME1) -void HAL_PWREx_EnablePVM1(void); -void HAL_PWREx_DisablePVM1(void); -#endif /* PWR_CR2_PVME1 */ -#if defined(PWR_CR2_PVME2) -void HAL_PWREx_EnablePVM2(void); -void HAL_PWREx_DisablePVM2(void); -#endif /* PWR_CR2_PVME2 */ -void HAL_PWREx_EnablePVM3(void); -void HAL_PWREx_DisablePVM3(void); -void HAL_PWREx_EnablePVM4(void); -void HAL_PWREx_DisablePVM4(void); -HAL_StatusTypeDef HAL_PWREx_ConfigPVM(PWR_PVMTypeDef *sConfigPVM); -#if defined(PWR_CR3_ENULP) -void HAL_PWREx_EnableBORPVD_ULP(void); -void HAL_PWREx_DisableBORPVD_ULP(void); -#endif /* PWR_CR3_ENULP */ -#if defined(PWR_CR4_EXT_SMPS_ON) -void HAL_PWREx_EnableExtSMPS_0V95(void); -void HAL_PWREx_DisableExtSMPS_0V95(void); -#endif /* PWR_CR4_EXT_SMPS_ON */ - - -/* Low Power modes configuration functions ************************************/ -void HAL_PWREx_EnableLowPowerRunMode(void); -HAL_StatusTypeDef HAL_PWREx_DisableLowPowerRunMode(void); -void HAL_PWREx_EnterSTOP0Mode(uint8_t STOPEntry); -void HAL_PWREx_EnterSTOP1Mode(uint8_t STOPEntry); -void HAL_PWREx_EnterSTOP2Mode(uint8_t STOPEntry); -void HAL_PWREx_EnterSHUTDOWNMode(void); - -void HAL_PWREx_PVD_PVM_IRQHandler(void); -#if defined(PWR_CR2_PVME1) -void HAL_PWREx_PVM1Callback(void); -#endif /* PWR_CR2_PVME1 */ -#if defined(PWR_CR2_PVME2) -void HAL_PWREx_PVM2Callback(void); -#endif /* PWR_CR2_PVME2 */ -void HAL_PWREx_PVM3Callback(void); -void HAL_PWREx_PVM4Callback(void); - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - - -#endif /* STM32L4xx_HAL_PWR_EX_H */ +/** + ****************************************************************************** + * @file stm32l4xx_hal_pwr_ex.h + * @author MCD Application Team + * @brief Header file of PWR HAL Extended module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32L4xx_HAL_PWR_EX_H +#define STM32L4xx_HAL_PWR_EX_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l4xx_hal_def.h" + +/** @addtogroup STM32L4xx_HAL_Driver + * @{ + */ + +/** @addtogroup PWREx + * @{ + */ + + +/* Exported types ------------------------------------------------------------*/ + +/** @defgroup PWREx_Exported_Types PWR Extended Exported Types + * @{ + */ + + +/** + * @brief PWR PVM configuration structure definition + */ +typedef struct +{ + uint32_t PVMType; /*!< PVMType: Specifies which voltage is monitored and against which threshold. + This parameter can be a value of @ref PWREx_PVM_Type. + @arg @ref PWR_PVM_1 Peripheral Voltage Monitoring 1 enable: VDDUSB versus 1.2 V (applicable when USB feature is supported). +@if STM32L486xx + @arg @ref PWR_PVM_2 Peripheral Voltage Monitoring 2 enable: VDDIO2 versus 0.9 V (applicable when VDDIO2 is present on device). +@endif + @arg @ref PWR_PVM_3 Peripheral Voltage Monitoring 3 enable: VDDA versus 1.62 V. + @arg @ref PWR_PVM_4 Peripheral Voltage Monitoring 4 enable: VDDA versus 2.2 V. */ + + uint32_t Mode; /*!< Mode: Specifies the operating mode for the selected pins. + This parameter can be a value of @ref PWREx_PVM_Mode. */ +}PWR_PVMTypeDef; + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup PWREx_Exported_Constants PWR Extended Exported Constants + * @{ + */ + +/** @defgroup PWREx_WUP_Polarity Shift to apply to retrieve polarity information from PWR_WAKEUP_PINy_xxx constants + * @{ + */ +#define PWR_WUP_POLARITY_SHIFT 0x05 /*!< Internal constant used to retrieve wakeup pin polariry */ +/** + * @} + */ + + +/** @defgroup PWREx_WakeUp_Pins PWR wake-up pins + * @{ + */ +#define PWR_WAKEUP_PIN1 PWR_CR3_EWUP1 /*!< Wakeup pin 1 (with high level polarity) */ +#define PWR_WAKEUP_PIN2 PWR_CR3_EWUP2 /*!< Wakeup pin 2 (with high level polarity) */ +#define PWR_WAKEUP_PIN3 PWR_CR3_EWUP3 /*!< Wakeup pin 3 (with high level polarity) */ +#define PWR_WAKEUP_PIN4 PWR_CR3_EWUP4 /*!< Wakeup pin 4 (with high level polarity) */ +#define PWR_WAKEUP_PIN5 PWR_CR3_EWUP5 /*!< Wakeup pin 5 (with high level polarity) */ +#define PWR_WAKEUP_PIN1_HIGH PWR_CR3_EWUP1 /*!< Wakeup pin 1 (with high level polarity) */ +#define PWR_WAKEUP_PIN2_HIGH PWR_CR3_EWUP2 /*!< Wakeup pin 2 (with high level polarity) */ +#define PWR_WAKEUP_PIN3_HIGH PWR_CR3_EWUP3 /*!< Wakeup pin 3 (with high level polarity) */ +#define PWR_WAKEUP_PIN4_HIGH PWR_CR3_EWUP4 /*!< Wakeup pin 4 (with high level polarity) */ +#define PWR_WAKEUP_PIN5_HIGH PWR_CR3_EWUP5 /*!< Wakeup pin 5 (with high level polarity) */ +#define PWR_WAKEUP_PIN1_LOW (uint32_t)((PWR_CR4_WP1<IMR2, PWR_EXTI_LINE_PVM1) + +/** + * @brief Disable the PVM1 Extended Interrupt Line. + * @retval None + */ +#define __HAL_PWR_PVM1_EXTI_DISABLE_IT() CLEAR_BIT(EXTI->IMR2, PWR_EXTI_LINE_PVM1) + +/** + * @brief Enable the PVM1 Event Line. + * @retval None + */ +#define __HAL_PWR_PVM1_EXTI_ENABLE_EVENT() SET_BIT(EXTI->EMR2, PWR_EVENT_LINE_PVM1) + +/** + * @brief Disable the PVM1 Event Line. + * @retval None + */ +#define __HAL_PWR_PVM1_EXTI_DISABLE_EVENT() CLEAR_BIT(EXTI->EMR2, PWR_EVENT_LINE_PVM1) + +/** + * @brief Enable the PVM1 Extended Interrupt Rising Trigger. + * @retval None + */ +#define __HAL_PWR_PVM1_EXTI_ENABLE_RISING_EDGE() SET_BIT(EXTI->RTSR2, PWR_EXTI_LINE_PVM1) + +/** + * @brief Disable the PVM1 Extended Interrupt Rising Trigger. + * @retval None + */ +#define __HAL_PWR_PVM1_EXTI_DISABLE_RISING_EDGE() CLEAR_BIT(EXTI->RTSR2, PWR_EXTI_LINE_PVM1) + +/** + * @brief Enable the PVM1 Extended Interrupt Falling Trigger. + * @retval None + */ +#define __HAL_PWR_PVM1_EXTI_ENABLE_FALLING_EDGE() SET_BIT(EXTI->FTSR2, PWR_EXTI_LINE_PVM1) + + +/** + * @brief Disable the PVM1 Extended Interrupt Falling Trigger. + * @retval None + */ +#define __HAL_PWR_PVM1_EXTI_DISABLE_FALLING_EDGE() CLEAR_BIT(EXTI->FTSR2, PWR_EXTI_LINE_PVM1) + + +/** + * @brief PVM1 EXTI line configuration: set rising & falling edge trigger. + * @retval None + */ +#define __HAL_PWR_PVM1_EXTI_ENABLE_RISING_FALLING_EDGE() \ + do { \ + __HAL_PWR_PVM1_EXTI_ENABLE_RISING_EDGE(); \ + __HAL_PWR_PVM1_EXTI_ENABLE_FALLING_EDGE(); \ + } while(0) + +/** + * @brief Disable the PVM1 Extended Interrupt Rising & Falling Trigger. + * @retval None + */ +#define __HAL_PWR_PVM1_EXTI_DISABLE_RISING_FALLING_EDGE() \ + do { \ + __HAL_PWR_PVM1_EXTI_DISABLE_RISING_EDGE(); \ + __HAL_PWR_PVM1_EXTI_DISABLE_FALLING_EDGE(); \ + } while(0) + +/** + * @brief Generate a Software interrupt on selected EXTI line. + * @retval None + */ +#define __HAL_PWR_PVM1_EXTI_GENERATE_SWIT() SET_BIT(EXTI->SWIER2, PWR_EXTI_LINE_PVM1) + +/** + * @brief Check whether the specified PVM1 EXTI interrupt flag is set or not. + * @retval EXTI PVM1 Line Status. + */ +#define __HAL_PWR_PVM1_EXTI_GET_FLAG() (EXTI->PR2 & PWR_EXTI_LINE_PVM1) + +/** + * @brief Clear the PVM1 EXTI flag. + * @retval None + */ +#define __HAL_PWR_PVM1_EXTI_CLEAR_FLAG() WRITE_REG(EXTI->PR2, PWR_EXTI_LINE_PVM1) + +#endif /* PWR_CR2_PVME1 */ + + +#if defined(PWR_CR2_PVME2) +/** + * @brief Enable the PVM2 Extended Interrupt Line. + * @retval None + */ +#define __HAL_PWR_PVM2_EXTI_ENABLE_IT() SET_BIT(EXTI->IMR2, PWR_EXTI_LINE_PVM2) + +/** + * @brief Disable the PVM2 Extended Interrupt Line. + * @retval None + */ +#define __HAL_PWR_PVM2_EXTI_DISABLE_IT() CLEAR_BIT(EXTI->IMR2, PWR_EXTI_LINE_PVM2) + +/** + * @brief Enable the PVM2 Event Line. + * @retval None + */ +#define __HAL_PWR_PVM2_EXTI_ENABLE_EVENT() SET_BIT(EXTI->EMR2, PWR_EVENT_LINE_PVM2) + +/** + * @brief Disable the PVM2 Event Line. + * @retval None + */ +#define __HAL_PWR_PVM2_EXTI_DISABLE_EVENT() CLEAR_BIT(EXTI->EMR2, PWR_EVENT_LINE_PVM2) + +/** + * @brief Enable the PVM2 Extended Interrupt Rising Trigger. + * @retval None + */ +#define __HAL_PWR_PVM2_EXTI_ENABLE_RISING_EDGE() SET_BIT(EXTI->RTSR2, PWR_EXTI_LINE_PVM2) + +/** + * @brief Disable the PVM2 Extended Interrupt Rising Trigger. + * @retval None + */ +#define __HAL_PWR_PVM2_EXTI_DISABLE_RISING_EDGE() CLEAR_BIT(EXTI->RTSR2, PWR_EXTI_LINE_PVM2) + +/** + * @brief Enable the PVM2 Extended Interrupt Falling Trigger. + * @retval None + */ +#define __HAL_PWR_PVM2_EXTI_ENABLE_FALLING_EDGE() SET_BIT(EXTI->FTSR2, PWR_EXTI_LINE_PVM2) + + +/** + * @brief Disable the PVM2 Extended Interrupt Falling Trigger. + * @retval None + */ +#define __HAL_PWR_PVM2_EXTI_DISABLE_FALLING_EDGE() CLEAR_BIT(EXTI->FTSR2, PWR_EXTI_LINE_PVM2) + + +/** + * @brief PVM2 EXTI line configuration: set rising & falling edge trigger. + * @retval None + */ +#define __HAL_PWR_PVM2_EXTI_ENABLE_RISING_FALLING_EDGE() \ + do { \ + __HAL_PWR_PVM2_EXTI_ENABLE_RISING_EDGE(); \ + __HAL_PWR_PVM2_EXTI_ENABLE_FALLING_EDGE(); \ + } while(0) + +/** + * @brief Disable the PVM2 Extended Interrupt Rising & Falling Trigger. + * @retval None + */ +#define __HAL_PWR_PVM2_EXTI_DISABLE_RISING_FALLING_EDGE() \ + do { \ + __HAL_PWR_PVM2_EXTI_DISABLE_RISING_EDGE(); \ + __HAL_PWR_PVM2_EXTI_DISABLE_FALLING_EDGE(); \ + } while(0) + +/** + * @brief Generate a Software interrupt on selected EXTI line. + * @retval None + */ +#define __HAL_PWR_PVM2_EXTI_GENERATE_SWIT() SET_BIT(EXTI->SWIER2, PWR_EXTI_LINE_PVM2) + +/** + * @brief Check whether the specified PVM2 EXTI interrupt flag is set or not. + * @retval EXTI PVM2 Line Status. + */ +#define __HAL_PWR_PVM2_EXTI_GET_FLAG() (EXTI->PR2 & PWR_EXTI_LINE_PVM2) + +/** + * @brief Clear the PVM2 EXTI flag. + * @retval None + */ +#define __HAL_PWR_PVM2_EXTI_CLEAR_FLAG() WRITE_REG(EXTI->PR2, PWR_EXTI_LINE_PVM2) + +#endif /* PWR_CR2_PVME2 */ + + +/** + * @brief Enable the PVM3 Extended Interrupt Line. + * @retval None + */ +#define __HAL_PWR_PVM3_EXTI_ENABLE_IT() SET_BIT(EXTI->IMR2, PWR_EXTI_LINE_PVM3) + +/** + * @brief Disable the PVM3 Extended Interrupt Line. + * @retval None + */ +#define __HAL_PWR_PVM3_EXTI_DISABLE_IT() CLEAR_BIT(EXTI->IMR2, PWR_EXTI_LINE_PVM3) + +/** + * @brief Enable the PVM3 Event Line. + * @retval None + */ +#define __HAL_PWR_PVM3_EXTI_ENABLE_EVENT() SET_BIT(EXTI->EMR2, PWR_EVENT_LINE_PVM3) + +/** + * @brief Disable the PVM3 Event Line. + * @retval None + */ +#define __HAL_PWR_PVM3_EXTI_DISABLE_EVENT() CLEAR_BIT(EXTI->EMR2, PWR_EVENT_LINE_PVM3) + +/** + * @brief Enable the PVM3 Extended Interrupt Rising Trigger. + * @retval None + */ +#define __HAL_PWR_PVM3_EXTI_ENABLE_RISING_EDGE() SET_BIT(EXTI->RTSR2, PWR_EXTI_LINE_PVM3) + +/** + * @brief Disable the PVM3 Extended Interrupt Rising Trigger. + * @retval None + */ +#define __HAL_PWR_PVM3_EXTI_DISABLE_RISING_EDGE() CLEAR_BIT(EXTI->RTSR2, PWR_EXTI_LINE_PVM3) + +/** + * @brief Enable the PVM3 Extended Interrupt Falling Trigger. + * @retval None + */ +#define __HAL_PWR_PVM3_EXTI_ENABLE_FALLING_EDGE() SET_BIT(EXTI->FTSR2, PWR_EXTI_LINE_PVM3) + + +/** + * @brief Disable the PVM3 Extended Interrupt Falling Trigger. + * @retval None + */ +#define __HAL_PWR_PVM3_EXTI_DISABLE_FALLING_EDGE() CLEAR_BIT(EXTI->FTSR2, PWR_EXTI_LINE_PVM3) + + +/** + * @brief PVM3 EXTI line configuration: set rising & falling edge trigger. + * @retval None + */ +#define __HAL_PWR_PVM3_EXTI_ENABLE_RISING_FALLING_EDGE() \ + do { \ + __HAL_PWR_PVM3_EXTI_ENABLE_RISING_EDGE(); \ + __HAL_PWR_PVM3_EXTI_ENABLE_FALLING_EDGE(); \ + } while(0) + +/** + * @brief Disable the PVM3 Extended Interrupt Rising & Falling Trigger. + * @retval None + */ +#define __HAL_PWR_PVM3_EXTI_DISABLE_RISING_FALLING_EDGE() \ + do { \ + __HAL_PWR_PVM3_EXTI_DISABLE_RISING_EDGE(); \ + __HAL_PWR_PVM3_EXTI_DISABLE_FALLING_EDGE(); \ + } while(0) + +/** + * @brief Generate a Software interrupt on selected EXTI line. + * @retval None + */ +#define __HAL_PWR_PVM3_EXTI_GENERATE_SWIT() SET_BIT(EXTI->SWIER2, PWR_EXTI_LINE_PVM3) + +/** + * @brief Check whether the specified PVM3 EXTI interrupt flag is set or not. + * @retval EXTI PVM3 Line Status. + */ +#define __HAL_PWR_PVM3_EXTI_GET_FLAG() (EXTI->PR2 & PWR_EXTI_LINE_PVM3) + +/** + * @brief Clear the PVM3 EXTI flag. + * @retval None + */ +#define __HAL_PWR_PVM3_EXTI_CLEAR_FLAG() WRITE_REG(EXTI->PR2, PWR_EXTI_LINE_PVM3) + + + + +/** + * @brief Enable the PVM4 Extended Interrupt Line. + * @retval None + */ +#define __HAL_PWR_PVM4_EXTI_ENABLE_IT() SET_BIT(EXTI->IMR2, PWR_EXTI_LINE_PVM4) + +/** + * @brief Disable the PVM4 Extended Interrupt Line. + * @retval None + */ +#define __HAL_PWR_PVM4_EXTI_DISABLE_IT() CLEAR_BIT(EXTI->IMR2, PWR_EXTI_LINE_PVM4) + +/** + * @brief Enable the PVM4 Event Line. + * @retval None + */ +#define __HAL_PWR_PVM4_EXTI_ENABLE_EVENT() SET_BIT(EXTI->EMR2, PWR_EVENT_LINE_PVM4) + +/** + * @brief Disable the PVM4 Event Line. + * @retval None + */ +#define __HAL_PWR_PVM4_EXTI_DISABLE_EVENT() CLEAR_BIT(EXTI->EMR2, PWR_EVENT_LINE_PVM4) + +/** + * @brief Enable the PVM4 Extended Interrupt Rising Trigger. + * @retval None + */ +#define __HAL_PWR_PVM4_EXTI_ENABLE_RISING_EDGE() SET_BIT(EXTI->RTSR2, PWR_EXTI_LINE_PVM4) + +/** + * @brief Disable the PVM4 Extended Interrupt Rising Trigger. + * @retval None + */ +#define __HAL_PWR_PVM4_EXTI_DISABLE_RISING_EDGE() CLEAR_BIT(EXTI->RTSR2, PWR_EXTI_LINE_PVM4) + +/** + * @brief Enable the PVM4 Extended Interrupt Falling Trigger. + * @retval None + */ +#define __HAL_PWR_PVM4_EXTI_ENABLE_FALLING_EDGE() SET_BIT(EXTI->FTSR2, PWR_EXTI_LINE_PVM4) + + +/** + * @brief Disable the PVM4 Extended Interrupt Falling Trigger. + * @retval None + */ +#define __HAL_PWR_PVM4_EXTI_DISABLE_FALLING_EDGE() CLEAR_BIT(EXTI->FTSR2, PWR_EXTI_LINE_PVM4) + + +/** + * @brief PVM4 EXTI line configuration: set rising & falling edge trigger. + * @retval None + */ +#define __HAL_PWR_PVM4_EXTI_ENABLE_RISING_FALLING_EDGE() \ + do { \ + __HAL_PWR_PVM4_EXTI_ENABLE_RISING_EDGE(); \ + __HAL_PWR_PVM4_EXTI_ENABLE_FALLING_EDGE(); \ + } while(0) + +/** + * @brief Disable the PVM4 Extended Interrupt Rising & Falling Trigger. + * @retval None + */ +#define __HAL_PWR_PVM4_EXTI_DISABLE_RISING_FALLING_EDGE() \ + do { \ + __HAL_PWR_PVM4_EXTI_DISABLE_RISING_EDGE(); \ + __HAL_PWR_PVM4_EXTI_DISABLE_FALLING_EDGE(); \ + } while(0) + +/** + * @brief Generate a Software interrupt on selected EXTI line. + * @retval None + */ +#define __HAL_PWR_PVM4_EXTI_GENERATE_SWIT() SET_BIT(EXTI->SWIER2, PWR_EXTI_LINE_PVM4) + +/** + * @brief Check whether or not the specified PVM4 EXTI interrupt flag is set. + * @retval EXTI PVM4 Line Status. + */ +#define __HAL_PWR_PVM4_EXTI_GET_FLAG() (EXTI->PR2 & PWR_EXTI_LINE_PVM4) + +/** + * @brief Clear the PVM4 EXTI flag. + * @retval None + */ +#define __HAL_PWR_PVM4_EXTI_CLEAR_FLAG() WRITE_REG(EXTI->PR2, PWR_EXTI_LINE_PVM4) + + +/** + * @brief Configure the main internal regulator output voltage. + * @param __REGULATOR__ specifies the regulator output voltage to achieve + * a tradeoff between performance and power consumption. + * This parameter can be one of the following values: + * @arg @ref PWR_REGULATOR_VOLTAGE_SCALE1 Regulator voltage output range 1 mode, + * typical output voltage at 1.2 V, + * system frequency up to 80 MHz. + * @arg @ref PWR_REGULATOR_VOLTAGE_SCALE2 Regulator voltage output range 2 mode, + * typical output voltage at 1.0 V, + * system frequency up to 26 MHz. + * @note This macro is similar to HAL_PWREx_ControlVoltageScaling() API but doesn't check + * whether or not VOSF flag is cleared when moving from range 2 to range 1. User + * may resort to __HAL_PWR_GET_FLAG() macro to check VOSF bit resetting. + * @retval None + */ +#define __HAL_PWR_VOLTAGESCALING_CONFIG(__REGULATOR__) do { \ + __IO uint32_t tmpreg; \ + MODIFY_REG(PWR->CR1, PWR_CR1_VOS, (__REGULATOR__)); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(PWR->CR1, PWR_CR1_VOS); \ + UNUSED(tmpreg); \ + } while(0) + +/** + * @} + */ + +/* Private macros --------------------------------------------------------*/ +/** @addtogroup PWREx_Private_Macros PWR Extended Private Macros + * @{ + */ + +#define IS_PWR_WAKEUP_PIN(PIN) (((PIN) == PWR_WAKEUP_PIN1) || \ + ((PIN) == PWR_WAKEUP_PIN2) || \ + ((PIN) == PWR_WAKEUP_PIN3) || \ + ((PIN) == PWR_WAKEUP_PIN4) || \ + ((PIN) == PWR_WAKEUP_PIN5) || \ + ((PIN) == PWR_WAKEUP_PIN1_HIGH) || \ + ((PIN) == PWR_WAKEUP_PIN2_HIGH) || \ + ((PIN) == PWR_WAKEUP_PIN3_HIGH) || \ + ((PIN) == PWR_WAKEUP_PIN4_HIGH) || \ + ((PIN) == PWR_WAKEUP_PIN5_HIGH) || \ + ((PIN) == PWR_WAKEUP_PIN1_LOW) || \ + ((PIN) == PWR_WAKEUP_PIN2_LOW) || \ + ((PIN) == PWR_WAKEUP_PIN3_LOW) || \ + ((PIN) == PWR_WAKEUP_PIN4_LOW) || \ + ((PIN) == PWR_WAKEUP_PIN5_LOW)) + +#if defined (STM32L475xx) || defined (STM32L476xx) || defined (STM32L485xx) || defined (STM32L486xx) || \ + defined (STM32L496xx) || defined (STM32L4A6xx) || \ + defined (STM32L4P5xx) || defined (STM32L4Q5xx) || \ + defined (STM32L4R5xx) || defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined (STM32L4S9xx) +#define IS_PWR_PVM_TYPE(TYPE) (((TYPE) == PWR_PVM_1) ||\ + ((TYPE) == PWR_PVM_2) ||\ + ((TYPE) == PWR_PVM_3) ||\ + ((TYPE) == PWR_PVM_4)) +#elif defined (STM32L471xx) +#define IS_PWR_PVM_TYPE(TYPE) (((TYPE) == PWR_PVM_2) ||\ + ((TYPE) == PWR_PVM_3) ||\ + ((TYPE) == PWR_PVM_4)) +#endif + +#if defined (STM32L412xx) || defined (STM32L422xx) || defined (STM32L433xx) || defined (STM32L443xx) || defined (STM32L452xx) || defined (STM32L462xx) +#define IS_PWR_PVM_TYPE(TYPE) (((TYPE) == PWR_PVM_1) ||\ + ((TYPE) == PWR_PVM_3) ||\ + ((TYPE) == PWR_PVM_4)) +#elif defined (STM32L431xx) || defined (STM32L432xx) || defined (STM32L442xx) || defined (STM32L451xx) +#define IS_PWR_PVM_TYPE(TYPE) (((TYPE) == PWR_PVM_3) ||\ + ((TYPE) == PWR_PVM_4)) +#endif + +#define IS_PWR_PVM_MODE(MODE) (((MODE) == PWR_PVM_MODE_NORMAL) ||\ + ((MODE) == PWR_PVM_MODE_IT_RISING) ||\ + ((MODE) == PWR_PVM_MODE_IT_FALLING) ||\ + ((MODE) == PWR_PVM_MODE_IT_RISING_FALLING) ||\ + ((MODE) == PWR_PVM_MODE_EVENT_RISING) ||\ + ((MODE) == PWR_PVM_MODE_EVENT_FALLING) ||\ + ((MODE) == PWR_PVM_MODE_EVENT_RISING_FALLING)) + +#if defined(PWR_CR5_R1MODE) +#define IS_PWR_VOLTAGE_SCALING_RANGE(RANGE) (((RANGE) == PWR_REGULATOR_VOLTAGE_SCALE1_BOOST) || \ + ((RANGE) == PWR_REGULATOR_VOLTAGE_SCALE1) || \ + ((RANGE) == PWR_REGULATOR_VOLTAGE_SCALE2)) +#else +#define IS_PWR_VOLTAGE_SCALING_RANGE(RANGE) (((RANGE) == PWR_REGULATOR_VOLTAGE_SCALE1) || \ + ((RANGE) == PWR_REGULATOR_VOLTAGE_SCALE2)) +#endif + + +#define IS_PWR_BATTERY_RESISTOR_SELECT(RESISTOR) (((RESISTOR) == PWR_BATTERY_CHARGING_RESISTOR_5) ||\ + ((RESISTOR) == PWR_BATTERY_CHARGING_RESISTOR_1_5)) + +#define IS_PWR_BATTERY_CHARGING(CHARGING) (((CHARGING) == PWR_BATTERY_CHARGING_DISABLE) ||\ + ((CHARGING) == PWR_BATTERY_CHARGING_ENABLE)) + +#define IS_PWR_GPIO_BIT_NUMBER(BIT_NUMBER) (((BIT_NUMBER) & GPIO_PIN_MASK) != (uint32_t)0x00) + + +#if defined (STM32L412xx) || defined (STM32L422xx) +#define IS_PWR_GPIO(GPIO) (((GPIO) == PWR_GPIO_A) ||\ + ((GPIO) == PWR_GPIO_B) ||\ + ((GPIO) == PWR_GPIO_C) ||\ + ((GPIO) == PWR_GPIO_D) ||\ + ((GPIO) == PWR_GPIO_H)) +#elif defined (STM32L431xx) || defined (STM32L433xx) || defined (STM32L443xx) || \ + defined (STM32L451xx) || defined (STM32L452xx) || defined (STM32L462xx) +#define IS_PWR_GPIO(GPIO) (((GPIO) == PWR_GPIO_A) ||\ + ((GPIO) == PWR_GPIO_B) ||\ + ((GPIO) == PWR_GPIO_C) ||\ + ((GPIO) == PWR_GPIO_D) ||\ + ((GPIO) == PWR_GPIO_E) ||\ + ((GPIO) == PWR_GPIO_H)) +#elif defined (STM32L432xx) || defined (STM32L442xx) +#define IS_PWR_GPIO(GPIO) (((GPIO) == PWR_GPIO_A) ||\ + ((GPIO) == PWR_GPIO_B) ||\ + ((GPIO) == PWR_GPIO_C) ||\ + ((GPIO) == PWR_GPIO_H)) +#elif defined (STM32L471xx) || defined (STM32L475xx) || defined (STM32L476xx) || defined (STM32L485xx) || defined (STM32L486xx) +#define IS_PWR_GPIO(GPIO) (((GPIO) == PWR_GPIO_A) ||\ + ((GPIO) == PWR_GPIO_B) ||\ + ((GPIO) == PWR_GPIO_C) ||\ + ((GPIO) == PWR_GPIO_D) ||\ + ((GPIO) == PWR_GPIO_E) ||\ + ((GPIO) == PWR_GPIO_F) ||\ + ((GPIO) == PWR_GPIO_G) ||\ + ((GPIO) == PWR_GPIO_H)) +#elif defined (STM32L496xx) || defined (STM32L4A6xx) || \ + defined (STM32L4P5xx) || defined (STM32L4Q5xx) || \ + defined (STM32L4R5xx) || defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined (STM32L4S9xx) +#define IS_PWR_GPIO(GPIO) (((GPIO) == PWR_GPIO_A) ||\ + ((GPIO) == PWR_GPIO_B) ||\ + ((GPIO) == PWR_GPIO_C) ||\ + ((GPIO) == PWR_GPIO_D) ||\ + ((GPIO) == PWR_GPIO_E) ||\ + ((GPIO) == PWR_GPIO_F) ||\ + ((GPIO) == PWR_GPIO_G) ||\ + ((GPIO) == PWR_GPIO_H) ||\ + ((GPIO) == PWR_GPIO_I)) +#endif + +#if defined (STM32L4P5xx) || defined (STM32L4Q5xx) +#define IS_PWR_SRAM2_RETENTION(SRAM2) (((SRAM2) == PWR_NO_SRAM2_RETENTION) ||\ + ((SRAM2) == PWR_FULL_SRAM2_RETENTION) ||\ + ((SRAM2) == PWR_4KBYTES_SRAM2_RETENTION)) +#else +#define IS_PWR_SRAM2_RETENTION(SRAM2) (((SRAM2) == PWR_NO_SRAM2_RETENTION) ||\ + ((SRAM2) == PWR_FULL_SRAM2_RETENTION)) +#endif + +/** + * @} + */ + + +/** @addtogroup PWREx_Exported_Functions PWR Extended Exported Functions + * @{ + */ + +/** @addtogroup PWREx_Exported_Functions_Group1 Extended Peripheral Control functions + * @{ + */ + + +/* Peripheral Control functions **********************************************/ +uint32_t HAL_PWREx_GetVoltageRange(void); +HAL_StatusTypeDef HAL_PWREx_ControlVoltageScaling(uint32_t VoltageScaling); +void HAL_PWREx_EnableBatteryCharging(uint32_t ResistorSelection); +void HAL_PWREx_DisableBatteryCharging(void); +#if defined(PWR_CR2_USV) +void HAL_PWREx_EnableVddUSB(void); +void HAL_PWREx_DisableVddUSB(void); +#endif /* PWR_CR2_USV */ +#if defined(PWR_CR2_IOSV) +void HAL_PWREx_EnableVddIO2(void); +void HAL_PWREx_DisableVddIO2(void); +#endif /* PWR_CR2_IOSV */ +void HAL_PWREx_EnableInternalWakeUpLine(void); +void HAL_PWREx_DisableInternalWakeUpLine(void); +HAL_StatusTypeDef HAL_PWREx_EnableGPIOPullUp(uint32_t GPIO, uint32_t GPIONumber); +HAL_StatusTypeDef HAL_PWREx_DisableGPIOPullUp(uint32_t GPIO, uint32_t GPIONumber); +HAL_StatusTypeDef HAL_PWREx_EnableGPIOPullDown(uint32_t GPIO, uint32_t GPIONumber); +HAL_StatusTypeDef HAL_PWREx_DisableGPIOPullDown(uint32_t GPIO, uint32_t GPIONumber); +void HAL_PWREx_EnablePullUpPullDownConfig(void); +void HAL_PWREx_DisablePullUpPullDownConfig(void); +void HAL_PWREx_EnableSRAM2ContentRetention(void); +void HAL_PWREx_DisableSRAM2ContentRetention(void); +HAL_StatusTypeDef HAL_PWREx_SetSRAM2ContentRetention(uint32_t SRAM2Size); +#if defined(PWR_CR1_RRSTP) +void HAL_PWREx_EnableSRAM3ContentRetention(void); +void HAL_PWREx_DisableSRAM3ContentRetention(void); +#endif /* PWR_CR1_RRSTP */ +#if defined(PWR_CR3_DSIPDEN) +void HAL_PWREx_EnableDSIPinsPDActivation(void); +void HAL_PWREx_DisableDSIPinsPDActivation(void); +#endif /* PWR_CR3_DSIPDEN */ +#if defined(PWR_CR2_PVME1) +void HAL_PWREx_EnablePVM1(void); +void HAL_PWREx_DisablePVM1(void); +#endif /* PWR_CR2_PVME1 */ +#if defined(PWR_CR2_PVME2) +void HAL_PWREx_EnablePVM2(void); +void HAL_PWREx_DisablePVM2(void); +#endif /* PWR_CR2_PVME2 */ +void HAL_PWREx_EnablePVM3(void); +void HAL_PWREx_DisablePVM3(void); +void HAL_PWREx_EnablePVM4(void); +void HAL_PWREx_DisablePVM4(void); +HAL_StatusTypeDef HAL_PWREx_ConfigPVM(PWR_PVMTypeDef *sConfigPVM); +#if defined(PWR_CR3_ENULP) +void HAL_PWREx_EnableBORPVD_ULP(void); +void HAL_PWREx_DisableBORPVD_ULP(void); +#endif /* PWR_CR3_ENULP */ +#if defined(PWR_CR4_EXT_SMPS_ON) +void HAL_PWREx_EnableExtSMPS_0V95(void); +void HAL_PWREx_DisableExtSMPS_0V95(void); +#endif /* PWR_CR4_EXT_SMPS_ON */ + + +/* Low Power modes configuration functions ************************************/ +void HAL_PWREx_EnableLowPowerRunMode(void); +HAL_StatusTypeDef HAL_PWREx_DisableLowPowerRunMode(void); +void HAL_PWREx_EnterSTOP0Mode(uint8_t STOPEntry); +void HAL_PWREx_EnterSTOP1Mode(uint8_t STOPEntry); +void HAL_PWREx_EnterSTOP2Mode(uint8_t STOPEntry); +void HAL_PWREx_EnterSHUTDOWNMode(void); + +void HAL_PWREx_PVD_PVM_IRQHandler(void); +#if defined(PWR_CR2_PVME1) +void HAL_PWREx_PVM1Callback(void); +#endif /* PWR_CR2_PVME1 */ +#if defined(PWR_CR2_PVME2) +void HAL_PWREx_PVM2Callback(void); +#endif /* PWR_CR2_PVME2 */ +void HAL_PWREx_PVM3Callback(void); +void HAL_PWREx_PVM4Callback(void); + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + + +#endif /* STM32L4xx_HAL_PWR_EX_H */ diff --git a/CablePositioning_IAP_V1.0/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_rcc.h b/CablePositioning_IAP_V1.0/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_rcc.h index fd0a2a7..f53e208 100644 --- a/CablePositioning_IAP_V1.0/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_rcc.h +++ b/CablePositioning_IAP_V1.0/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_rcc.h @@ -1,4883 +1,4883 @@ -/** - ****************************************************************************** - * @file stm32l4xx_hal_rcc.h - * @author MCD Application Team - * @brief Header file of RCC HAL module. - ****************************************************************************** - * @attention - * - * Copyright (c) 2017 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file in - * the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef STM32L4xx_HAL_RCC_H -#define STM32L4xx_HAL_RCC_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32l4xx_hal_def.h" - -/** @addtogroup STM32L4xx_HAL_Driver - * @{ - */ - -/** @addtogroup RCC - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ -/** @defgroup RCC_Exported_Types RCC Exported Types - * @{ - */ - -/** - * @brief RCC PLL configuration structure definition - */ -typedef struct -{ - uint32_t PLLState; /*!< The new state of the PLL. - This parameter can be a value of @ref RCC_PLL_Config */ - - uint32_t PLLSource; /*!< RCC_PLLSource: PLL entry clock source. - This parameter must be a value of @ref RCC_PLL_Clock_Source */ - - uint32_t PLLM; /*!< PLLM: Division factor for PLL VCO input clock. - This parameter must be a number between Min_Data = 1 and Max_Data = 16 on STM32L4Rx/STM32L4Sx devices. - This parameter must be a number between Min_Data = 1 and Max_Data = 8 on the other devices */ - - uint32_t PLLN; /*!< PLLN: Multiplication factor for PLL VCO output clock. - This parameter must be a number between Min_Data = 8 and Max_Data = 86 */ - -#if defined(RCC_PLLP_SUPPORT) - uint32_t PLLP; /*!< PLLP: Division factor for SAI clock. - This parameter must be a value of @ref RCC_PLLP_Clock_Divider */ -#endif /* RCC_PLLP_SUPPORT */ - - uint32_t PLLQ; /*!< PLLQ: Division factor for SDMMC1, RNG and USB clocks. - This parameter must be a value of @ref RCC_PLLQ_Clock_Divider */ - - uint32_t PLLR; /*!< PLLR: Division for the main system clock. - User have to set the PLLR parameter correctly to not exceed max frequency 120MHZ - on STM32L4Rx/STM32L4Sx devices else 80MHz on the other devices. - This parameter must be a value of @ref RCC_PLLR_Clock_Divider */ - -}RCC_PLLInitTypeDef; - -/** - * @brief RCC Internal/External Oscillator (HSE, HSI, MSI, LSE and LSI) configuration structure definition - */ -typedef struct -{ - uint32_t OscillatorType; /*!< The oscillators to be configured. - This parameter can be a value of @ref RCC_Oscillator_Type */ - - uint32_t HSEState; /*!< The new state of the HSE. - This parameter can be a value of @ref RCC_HSE_Config */ - - uint32_t LSEState; /*!< The new state of the LSE. - This parameter can be a value of @ref RCC_LSE_Config */ - - uint32_t HSIState; /*!< The new state of the HSI. - This parameter can be a value of @ref RCC_HSI_Config */ - - uint32_t HSICalibrationValue; /*!< The calibration trimming value (default is RCC_HSICALIBRATION_DEFAULT). - This parameter must be a number between Min_Data = 0 and Max_Data = 31 on - STM32L43x/STM32L44x/STM32L47x/STM32L48x devices. - This parameter must be a number between Min_Data = 0 and Max_Data = 127 on - the other devices */ - - uint32_t LSIState; /*!< The new state of the LSI. - This parameter can be a value of @ref RCC_LSI_Config */ -#if defined(RCC_CSR_LSIPREDIV) - - uint32_t LSIDiv; /*!< The division factor of the LSI. - This parameter can be a value of @ref RCC_LSI_Div */ -#endif /* RCC_CSR_LSIPREDIV */ - - uint32_t MSIState; /*!< The new state of the MSI. - This parameter can be a value of @ref RCC_MSI_Config */ - - uint32_t MSICalibrationValue; /*!< The calibration trimming value (default is RCC_MSICALIBRATION_DEFAULT). - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF */ - - uint32_t MSIClockRange; /*!< The MSI frequency range. - This parameter can be a value of @ref RCC_MSI_Clock_Range */ - - uint32_t HSI48State; /*!< The new state of the HSI48 (only applicable to STM32L43x/STM32L44x/STM32L49x/STM32L4Ax devices). - This parameter can be a value of @ref RCC_HSI48_Config */ - - RCC_PLLInitTypeDef PLL; /*!< Main PLL structure parameters */ - -}RCC_OscInitTypeDef; - -/** - * @brief RCC System, AHB and APB busses clock configuration structure definition - */ -typedef struct -{ - uint32_t ClockType; /*!< The clock to be configured. - This parameter can be a value of @ref RCC_System_Clock_Type */ - - uint32_t SYSCLKSource; /*!< The clock source used as system clock (SYSCLK). - This parameter can be a value of @ref RCC_System_Clock_Source */ - - uint32_t AHBCLKDivider; /*!< The AHB clock (HCLK) divider. This clock is derived from the system clock (SYSCLK). - This parameter can be a value of @ref RCC_AHB_Clock_Source */ - - uint32_t APB1CLKDivider; /*!< The APB1 clock (PCLK1) divider. This clock is derived from the AHB clock (HCLK). - This parameter can be a value of @ref RCC_APB1_APB2_Clock_Source */ - - uint32_t APB2CLKDivider; /*!< The APB2 clock (PCLK2) divider. This clock is derived from the AHB clock (HCLK). - This parameter can be a value of @ref RCC_APB1_APB2_Clock_Source */ - -}RCC_ClkInitTypeDef; - -/** - * @} - */ - -/* Exported constants --------------------------------------------------------*/ -/** @defgroup RCC_Exported_Constants RCC Exported Constants - * @{ - */ - -/** @defgroup RCC_Timeout_Value Timeout Values - * @{ - */ -#define RCC_DBP_TIMEOUT_VALUE 2U /* 2 ms (minimum Tick + 1) */ -#define RCC_LSE_TIMEOUT_VALUE LSE_STARTUP_TIMEOUT -/** - * @} - */ - -/** @defgroup RCC_Oscillator_Type Oscillator Type - * @{ - */ -#define RCC_OSCILLATORTYPE_NONE 0x00000000U /*!< Oscillator configuration unchanged */ -#define RCC_OSCILLATORTYPE_HSE 0x00000001U /*!< HSE to configure */ -#define RCC_OSCILLATORTYPE_HSI 0x00000002U /*!< HSI to configure */ -#define RCC_OSCILLATORTYPE_LSE 0x00000004U /*!< LSE to configure */ -#define RCC_OSCILLATORTYPE_LSI 0x00000008U /*!< LSI to configure */ -#define RCC_OSCILLATORTYPE_MSI 0x00000010U /*!< MSI to configure */ -#if defined(RCC_HSI48_SUPPORT) -#define RCC_OSCILLATORTYPE_HSI48 0x00000020U /*!< HSI48 to configure */ -#endif /* RCC_HSI48_SUPPORT */ -/** - * @} - */ - -/** @defgroup RCC_HSE_Config HSE Config - * @{ - */ -#define RCC_HSE_OFF 0x00000000U /*!< HSE clock deactivation */ -#define RCC_HSE_ON RCC_CR_HSEON /*!< HSE clock activation */ -#define RCC_HSE_BYPASS (RCC_CR_HSEBYP | RCC_CR_HSEON) /*!< External clock source for HSE clock */ -/** - * @} - */ - -/** @defgroup RCC_LSE_Config LSE Config - * @{ - */ -#define RCC_LSE_OFF 0x00000000U /*!< LSE clock deactivation */ -#define RCC_LSE_ON RCC_BDCR_LSEON /*!< LSE clock activation */ -#define RCC_LSE_BYPASS (RCC_BDCR_LSEBYP | RCC_BDCR_LSEON) /*!< External clock source for LSE clock */ -#if defined(RCC_BDCR_LSESYSDIS) -#define RCC_LSE_ON_RTC_ONLY (RCC_BDCR_LSESYSDIS | RCC_BDCR_LSEON) /*!< LSE clock activation without propagation to system */ -#define RCC_LSE_BYPASS_RTC_ONLY (RCC_BDCR_LSEBYP | RCC_BDCR_LSESYSDIS | RCC_BDCR_LSEON) /*!< External clock source for LSE clock without propagation to system */ -#endif /* RCC_BDCR_LSESYSDIS */ -/** - * @} - */ - -/** @defgroup RCC_HSI_Config HSI Config - * @{ - */ -#define RCC_HSI_OFF 0x00000000U /*!< HSI clock deactivation */ -#define RCC_HSI_ON RCC_CR_HSION /*!< HSI clock activation */ - -#if defined(RCC_ICSCR_HSITRIM_6) -#define RCC_HSICALIBRATION_DEFAULT 0x40U /*!< Default HSI calibration trimming value 64 on devices other than STM32L43x/STM32L44x/STM32L47x/STM32L48x */ -#else -#define RCC_HSICALIBRATION_DEFAULT 0x10U /*!< Default HSI calibration trimming value 16 on STM32L43x/STM32L44x/STM32L47x/STM32L48x devices */ -#endif /* RCC_ICSCR_HSITRIM_6 */ -/** - * @} - */ - -/** @defgroup RCC_LSI_Config LSI Config - * @{ - */ -#define RCC_LSI_OFF 0x00000000U /*!< LSI clock deactivation */ -#define RCC_LSI_ON RCC_CSR_LSION /*!< LSI clock activation */ -/** - * @} - */ -#if defined(RCC_CSR_LSIPREDIV) - -/** @defgroup RCC_LSI_Div LSI Div - * @{ - */ -#define RCC_LSI_DIV1 0x00000000U /*!< LSI clock not divided */ -#define RCC_LSI_DIV128 RCC_CSR_LSIPREDIV /*!< LSI clock divided by 128 */ -/** - * @} - */ -#endif /* RCC_CSR_LSIPREDIV */ - -/** @defgroup RCC_MSI_Config MSI Config - * @{ - */ -#define RCC_MSI_OFF 0x00000000U /*!< MSI clock deactivation */ -#define RCC_MSI_ON RCC_CR_MSION /*!< MSI clock activation */ - -#define RCC_MSICALIBRATION_DEFAULT 0U /*!< Default MSI calibration trimming value */ -/** - * @} - */ - -#if defined(RCC_HSI48_SUPPORT) -/** @defgroup RCC_HSI48_Config HSI48 Config - * @{ - */ -#define RCC_HSI48_OFF 0x00000000U /*!< HSI48 clock deactivation */ -#define RCC_HSI48_ON RCC_CRRCR_HSI48ON /*!< HSI48 clock activation */ -/** - * @} - */ -#else -/** @defgroup RCC_HSI48_Config HSI48 Config - * @{ - */ -#define RCC_HSI48_OFF 0x00000000U /*!< HSI48 clock deactivation */ -/** - * @} - */ -#endif /* RCC_HSI48_SUPPORT */ - -/** @defgroup RCC_PLL_Config PLL Config - * @{ - */ -#define RCC_PLL_NONE 0x00000000U /*!< PLL configuration unchanged */ -#define RCC_PLL_OFF 0x00000001U /*!< PLL deactivation */ -#define RCC_PLL_ON 0x00000002U /*!< PLL activation */ -/** - * @} - */ - -#if defined(RCC_PLLP_SUPPORT) -/** @defgroup RCC_PLLP_Clock_Divider PLLP Clock Divider - * @{ - */ -#if defined(RCC_PLLP_DIV_2_31_SUPPORT) -#define RCC_PLLP_DIV2 0x00000002U /*!< PLLP division factor = 2 */ -#define RCC_PLLP_DIV3 0x00000003U /*!< PLLP division factor = 3 */ -#define RCC_PLLP_DIV4 0x00000004U /*!< PLLP division factor = 4 */ -#define RCC_PLLP_DIV5 0x00000005U /*!< PLLP division factor = 5 */ -#define RCC_PLLP_DIV6 0x00000006U /*!< PLLP division factor = 6 */ -#define RCC_PLLP_DIV7 0x00000007U /*!< PLLP division factor = 7 */ -#define RCC_PLLP_DIV8 0x00000008U /*!< PLLP division factor = 8 */ -#define RCC_PLLP_DIV9 0x00000009U /*!< PLLP division factor = 9 */ -#define RCC_PLLP_DIV10 0x0000000AU /*!< PLLP division factor = 10 */ -#define RCC_PLLP_DIV11 0x0000000BU /*!< PLLP division factor = 11 */ -#define RCC_PLLP_DIV12 0x0000000CU /*!< PLLP division factor = 12 */ -#define RCC_PLLP_DIV13 0x0000000DU /*!< PLLP division factor = 13 */ -#define RCC_PLLP_DIV14 0x0000000EU /*!< PLLP division factor = 14 */ -#define RCC_PLLP_DIV15 0x0000000FU /*!< PLLP division factor = 15 */ -#define RCC_PLLP_DIV16 0x00000010U /*!< PLLP division factor = 16 */ -#define RCC_PLLP_DIV17 0x00000011U /*!< PLLP division factor = 17 */ -#define RCC_PLLP_DIV18 0x00000012U /*!< PLLP division factor = 18 */ -#define RCC_PLLP_DIV19 0x00000013U /*!< PLLP division factor = 19 */ -#define RCC_PLLP_DIV20 0x00000014U /*!< PLLP division factor = 20 */ -#define RCC_PLLP_DIV21 0x00000015U /*!< PLLP division factor = 21 */ -#define RCC_PLLP_DIV22 0x00000016U /*!< PLLP division factor = 22 */ -#define RCC_PLLP_DIV23 0x00000017U /*!< PLLP division factor = 23 */ -#define RCC_PLLP_DIV24 0x00000018U /*!< PLLP division factor = 24 */ -#define RCC_PLLP_DIV25 0x00000019U /*!< PLLP division factor = 25 */ -#define RCC_PLLP_DIV26 0x0000001AU /*!< PLLP division factor = 26 */ -#define RCC_PLLP_DIV27 0x0000001BU /*!< PLLP division factor = 27 */ -#define RCC_PLLP_DIV28 0x0000001CU /*!< PLLP division factor = 28 */ -#define RCC_PLLP_DIV29 0x0000001DU /*!< PLLP division factor = 29 */ -#define RCC_PLLP_DIV30 0x0000001EU /*!< PLLP division factor = 30 */ -#define RCC_PLLP_DIV31 0x0000001FU /*!< PLLP division factor = 31 */ -#else -#define RCC_PLLP_DIV7 0x00000007U /*!< PLLP division factor = 7 */ -#define RCC_PLLP_DIV17 0x00000011U /*!< PLLP division factor = 17 */ -#endif /* RCC_PLLP_DIV_2_31_SUPPORT */ -/** - * @} - */ -#endif /* RCC_PLLP_SUPPORT */ - -/** @defgroup RCC_PLLQ_Clock_Divider PLLQ Clock Divider - * @{ - */ -#define RCC_PLLQ_DIV2 0x00000002U /*!< PLLQ division factor = 2 */ -#define RCC_PLLQ_DIV4 0x00000004U /*!< PLLQ division factor = 4 */ -#define RCC_PLLQ_DIV6 0x00000006U /*!< PLLQ division factor = 6 */ -#define RCC_PLLQ_DIV8 0x00000008U /*!< PLLQ division factor = 8 */ -/** - * @} - */ - -/** @defgroup RCC_PLLR_Clock_Divider PLLR Clock Divider - * @{ - */ -#define RCC_PLLR_DIV2 0x00000002U /*!< PLLR division factor = 2 */ -#define RCC_PLLR_DIV4 0x00000004U /*!< PLLR division factor = 4 */ -#define RCC_PLLR_DIV6 0x00000006U /*!< PLLR division factor = 6 */ -#define RCC_PLLR_DIV8 0x00000008U /*!< PLLR division factor = 8 */ -/** - * @} - */ - -/** @defgroup RCC_PLL_Clock_Source PLL Clock Source - * @{ - */ -#define RCC_PLLSOURCE_NONE 0x00000000U /*!< No clock selected as PLL entry clock source */ -#define RCC_PLLSOURCE_MSI RCC_PLLCFGR_PLLSRC_MSI /*!< MSI clock selected as PLL entry clock source */ -#define RCC_PLLSOURCE_HSI RCC_PLLCFGR_PLLSRC_HSI /*!< HSI clock selected as PLL entry clock source */ -#define RCC_PLLSOURCE_HSE RCC_PLLCFGR_PLLSRC_HSE /*!< HSE clock selected as PLL entry clock source */ -/** - * @} - */ - -/** @defgroup RCC_PLL_Clock_Output PLL Clock Output - * @{ - */ -#if defined(RCC_PLLSAI2_SUPPORT) -#define RCC_PLL_SAI3CLK RCC_PLLCFGR_PLLPEN /*!< PLLSAI3CLK selection from main PLL (for devices with PLLSAI2) */ -#elif defined(RCC_PLLSAI1_SUPPORT) -#define RCC_PLL_SAI2CLK RCC_PLLCFGR_PLLPEN /*!< PLLSAI2CLK selection from main PLL (for devices without PLLSAI2) */ -#endif /* RCC_PLLSAI2_SUPPORT */ -#define RCC_PLL_48M1CLK RCC_PLLCFGR_PLLQEN /*!< PLL48M1CLK selection from main PLL */ -#define RCC_PLL_SYSCLK RCC_PLLCFGR_PLLREN /*!< PLLCLK selection from main PLL */ -/** - * @} - */ -#if defined(RCC_PLLSAI1_SUPPORT) - -/** @defgroup RCC_PLLSAI1_Clock_Output PLLSAI1 Clock Output - * @{ - */ -#define RCC_PLLSAI1_SAI1CLK RCC_PLLSAI1CFGR_PLLSAI1PEN /*!< PLLSAI1CLK selection from PLLSAI1 */ -#define RCC_PLLSAI1_48M2CLK RCC_PLLSAI1CFGR_PLLSAI1QEN /*!< PLL48M2CLK selection from PLLSAI1 */ -#define RCC_PLLSAI1_ADC1CLK RCC_PLLSAI1CFGR_PLLSAI1REN /*!< PLLADC1CLK selection from PLLSAI1 */ -/** - * @} - */ -#endif /* RCC_PLLSAI1_SUPPORT */ - -#if defined(RCC_PLLSAI2_SUPPORT) - -/** @defgroup RCC_PLLSAI2_Clock_Output PLLSAI2 Clock Output - * @{ - */ -#define RCC_PLLSAI2_SAI2CLK RCC_PLLSAI2CFGR_PLLSAI2PEN /*!< PLLSAI2CLK selection from PLLSAI2 */ -#if defined(RCC_PLLSAI2Q_DIV_SUPPORT) -#define RCC_PLLSAI2_DSICLK RCC_PLLSAI2CFGR_PLLSAI2QEN /*!< PLLDSICLK selection from PLLSAI2 */ -#endif /* RCC_PLLSAI2Q_DIV_SUPPORT */ -#if defined(STM32L471xx) || defined(STM32L475xx) || defined(STM32L476xx) || defined(STM32L485xx) || defined(STM32L486xx) || defined(STM32L496xx) || defined(STM32L4A6xx) -#define RCC_PLLSAI2_ADC2CLK RCC_PLLSAI2CFGR_PLLSAI2REN /*!< PLLADC2CLK selection from PLLSAI2 */ -#else -#define RCC_PLLSAI2_LTDCCLK RCC_PLLSAI2CFGR_PLLSAI2REN /*!< PLLLTDCCLK selection from PLLSAI2 */ -#endif /* STM32L471xx || STM32L475xx || STM32L476xx || STM32L485xx || STM32L486xx || STM32L496xx || STM32L4A6xx */ -/** - * @} - */ - -#endif /* RCC_PLLSAI2_SUPPORT */ - -/** @defgroup RCC_MSI_Clock_Range MSI Clock Range - * @{ - */ -#define RCC_MSIRANGE_0 RCC_CR_MSIRANGE_0 /*!< MSI = 100 KHz */ -#define RCC_MSIRANGE_1 RCC_CR_MSIRANGE_1 /*!< MSI = 200 KHz */ -#define RCC_MSIRANGE_2 RCC_CR_MSIRANGE_2 /*!< MSI = 400 KHz */ -#define RCC_MSIRANGE_3 RCC_CR_MSIRANGE_3 /*!< MSI = 800 KHz */ -#define RCC_MSIRANGE_4 RCC_CR_MSIRANGE_4 /*!< MSI = 1 MHz */ -#define RCC_MSIRANGE_5 RCC_CR_MSIRANGE_5 /*!< MSI = 2 MHz */ -#define RCC_MSIRANGE_6 RCC_CR_MSIRANGE_6 /*!< MSI = 4 MHz */ -#define RCC_MSIRANGE_7 RCC_CR_MSIRANGE_7 /*!< MSI = 8 MHz */ -#define RCC_MSIRANGE_8 RCC_CR_MSIRANGE_8 /*!< MSI = 16 MHz */ -#define RCC_MSIRANGE_9 RCC_CR_MSIRANGE_9 /*!< MSI = 24 MHz */ -#define RCC_MSIRANGE_10 RCC_CR_MSIRANGE_10 /*!< MSI = 32 MHz */ -#define RCC_MSIRANGE_11 RCC_CR_MSIRANGE_11 /*!< MSI = 48 MHz */ -/** - * @} - */ - -/** @defgroup RCC_System_Clock_Type System Clock Type - * @{ - */ -#define RCC_CLOCKTYPE_SYSCLK 0x00000001U /*!< SYSCLK to configure */ -#define RCC_CLOCKTYPE_HCLK 0x00000002U /*!< HCLK to configure */ -#define RCC_CLOCKTYPE_PCLK1 0x00000004U /*!< PCLK1 to configure */ -#define RCC_CLOCKTYPE_PCLK2 0x00000008U /*!< PCLK2 to configure */ -/** - * @} - */ - -/** @defgroup RCC_System_Clock_Source System Clock Source - * @{ - */ -#define RCC_SYSCLKSOURCE_MSI RCC_CFGR_SW_MSI /*!< MSI selection as system clock */ -#define RCC_SYSCLKSOURCE_HSI RCC_CFGR_SW_HSI /*!< HSI selection as system clock */ -#define RCC_SYSCLKSOURCE_HSE RCC_CFGR_SW_HSE /*!< HSE selection as system clock */ -#define RCC_SYSCLKSOURCE_PLLCLK RCC_CFGR_SW_PLL /*!< PLL selection as system clock */ -/** - * @} - */ - -/** @defgroup RCC_System_Clock_Source_Status System Clock Source Status - * @{ - */ -#define RCC_SYSCLKSOURCE_STATUS_MSI RCC_CFGR_SWS_MSI /*!< MSI used as system clock */ -#define RCC_SYSCLKSOURCE_STATUS_HSI RCC_CFGR_SWS_HSI /*!< HSI used as system clock */ -#define RCC_SYSCLKSOURCE_STATUS_HSE RCC_CFGR_SWS_HSE /*!< HSE used as system clock */ -#define RCC_SYSCLKSOURCE_STATUS_PLLCLK RCC_CFGR_SWS_PLL /*!< PLL used as system clock */ -/** - * @} - */ - -/** @defgroup RCC_AHB_Clock_Source AHB Clock Source - * @{ - */ -#define RCC_SYSCLK_DIV1 RCC_CFGR_HPRE_DIV1 /*!< SYSCLK not divided */ -#define RCC_SYSCLK_DIV2 RCC_CFGR_HPRE_DIV2 /*!< SYSCLK divided by 2 */ -#define RCC_SYSCLK_DIV4 RCC_CFGR_HPRE_DIV4 /*!< SYSCLK divided by 4 */ -#define RCC_SYSCLK_DIV8 RCC_CFGR_HPRE_DIV8 /*!< SYSCLK divided by 8 */ -#define RCC_SYSCLK_DIV16 RCC_CFGR_HPRE_DIV16 /*!< SYSCLK divided by 16 */ -#define RCC_SYSCLK_DIV64 RCC_CFGR_HPRE_DIV64 /*!< SYSCLK divided by 64 */ -#define RCC_SYSCLK_DIV128 RCC_CFGR_HPRE_DIV128 /*!< SYSCLK divided by 128 */ -#define RCC_SYSCLK_DIV256 RCC_CFGR_HPRE_DIV256 /*!< SYSCLK divided by 256 */ -#define RCC_SYSCLK_DIV512 RCC_CFGR_HPRE_DIV512 /*!< SYSCLK divided by 512 */ -/** - * @} - */ - -/** @defgroup RCC_APB1_APB2_Clock_Source APB1 APB2 Clock Source - * @{ - */ -#define RCC_HCLK_DIV1 RCC_CFGR_PPRE1_DIV1 /*!< HCLK not divided */ -#define RCC_HCLK_DIV2 RCC_CFGR_PPRE1_DIV2 /*!< HCLK divided by 2 */ -#define RCC_HCLK_DIV4 RCC_CFGR_PPRE1_DIV4 /*!< HCLK divided by 4 */ -#define RCC_HCLK_DIV8 RCC_CFGR_PPRE1_DIV8 /*!< HCLK divided by 8 */ -#define RCC_HCLK_DIV16 RCC_CFGR_PPRE1_DIV16 /*!< HCLK divided by 16 */ -/** - * @} - */ - -/** @defgroup RCC_RTC_Clock_Source RTC Clock Source - * @{ - */ -#define RCC_RTCCLKSOURCE_NONE 0x00000000U /*!< No clock used as RTC clock */ -#define RCC_RTCCLKSOURCE_LSE RCC_BDCR_RTCSEL_0 /*!< LSE oscillator clock used as RTC clock */ -#define RCC_RTCCLKSOURCE_LSI RCC_BDCR_RTCSEL_1 /*!< LSI oscillator clock used as RTC clock */ -#define RCC_RTCCLKSOURCE_HSE_DIV32 RCC_BDCR_RTCSEL /*!< HSE oscillator clock divided by 32 used as RTC clock */ -/** - * @} - */ - -/** @defgroup RCC_MCO_Index MCO Index - * @{ - */ -#define RCC_MCO1 0x00000000U -#define RCC_MCO RCC_MCO1 /*!< MCO1 to be compliant with other families with 2 MCOs*/ -/** - * @} - */ - -/** @defgroup RCC_MCO1_Clock_Source MCO1 Clock Source - * @{ - */ -#define RCC_MCO1SOURCE_NOCLOCK 0x00000000U /*!< MCO1 output disabled, no clock on MCO1 */ -#define RCC_MCO1SOURCE_SYSCLK RCC_CFGR_MCOSEL_0 /*!< SYSCLK selection as MCO1 source */ -#define RCC_MCO1SOURCE_MSI RCC_CFGR_MCOSEL_1 /*!< MSI selection as MCO1 source */ -#define RCC_MCO1SOURCE_HSI (RCC_CFGR_MCOSEL_0| RCC_CFGR_MCOSEL_1) /*!< HSI selection as MCO1 source */ -#define RCC_MCO1SOURCE_HSE RCC_CFGR_MCOSEL_2 /*!< HSE selection as MCO1 source */ -#define RCC_MCO1SOURCE_PLLCLK (RCC_CFGR_MCOSEL_0|RCC_CFGR_MCOSEL_2) /*!< PLLCLK selection as MCO1 source */ -#define RCC_MCO1SOURCE_LSI (RCC_CFGR_MCOSEL_1|RCC_CFGR_MCOSEL_2) /*!< LSI selection as MCO1 source */ -#define RCC_MCO1SOURCE_LSE (RCC_CFGR_MCOSEL_0|RCC_CFGR_MCOSEL_1|RCC_CFGR_MCOSEL_2) /*!< LSE selection as MCO1 source */ -#if defined(RCC_HSI48_SUPPORT) -#define RCC_MCO1SOURCE_HSI48 RCC_CFGR_MCOSEL_3 /*!< HSI48 selection as MCO1 source (STM32L43x/STM32L44x devices) */ -#endif /* RCC_HSI48_SUPPORT */ -/** - * @} - */ - -/** @defgroup RCC_MCOx_Clock_Prescaler MCO1 Clock Prescaler - * @{ - */ -#define RCC_MCODIV_1 RCC_CFGR_MCOPRE_DIV1 /*!< MCO not divided */ -#define RCC_MCODIV_2 RCC_CFGR_MCOPRE_DIV2 /*!< MCO divided by 2 */ -#define RCC_MCODIV_4 RCC_CFGR_MCOPRE_DIV4 /*!< MCO divided by 4 */ -#define RCC_MCODIV_8 RCC_CFGR_MCOPRE_DIV8 /*!< MCO divided by 8 */ -#define RCC_MCODIV_16 RCC_CFGR_MCOPRE_DIV16 /*!< MCO divided by 16 */ -/** - * @} - */ - -/** @defgroup RCC_Interrupt Interrupts - * @{ - */ -#define RCC_IT_LSIRDY RCC_CIFR_LSIRDYF /*!< LSI Ready Interrupt flag */ -#define RCC_IT_LSERDY RCC_CIFR_LSERDYF /*!< LSE Ready Interrupt flag */ -#define RCC_IT_MSIRDY RCC_CIFR_MSIRDYF /*!< MSI Ready Interrupt flag */ -#define RCC_IT_HSIRDY RCC_CIFR_HSIRDYF /*!< HSI16 Ready Interrupt flag */ -#define RCC_IT_HSERDY RCC_CIFR_HSERDYF /*!< HSE Ready Interrupt flag */ -#define RCC_IT_PLLRDY RCC_CIFR_PLLRDYF /*!< PLL Ready Interrupt flag */ -#if defined(RCC_PLLSAI1_SUPPORT) -#define RCC_IT_PLLSAI1RDY RCC_CIFR_PLLSAI1RDYF /*!< PLLSAI1 Ready Interrupt flag */ -#endif /* RCC_PLLSAI1_SUPPORT */ -#if defined(RCC_PLLSAI2_SUPPORT) -#define RCC_IT_PLLSAI2RDY RCC_CIFR_PLLSAI2RDYF /*!< PLLSAI2 Ready Interrupt flag */ -#endif /* RCC_PLLSAI2_SUPPORT */ -#define RCC_IT_CSS RCC_CIFR_CSSF /*!< Clock Security System Interrupt flag */ -#define RCC_IT_LSECSS RCC_CIFR_LSECSSF /*!< LSE Clock Security System Interrupt flag */ -#if defined(RCC_HSI48_SUPPORT) -#define RCC_IT_HSI48RDY RCC_CIFR_HSI48RDYF /*!< HSI48 Ready Interrupt flag */ -#endif /* RCC_HSI48_SUPPORT */ -/** - * @} - */ - -/** @defgroup RCC_Flag Flags - * Elements values convention: XXXYYYYYb - * - YYYYY : Flag position in the register - * - XXX : Register index - * - 001: CR register - * - 010: BDCR register - * - 011: CSR register - * - 100: CRRCR register - * @{ - */ -/* Flags in the CR register */ -#define RCC_FLAG_MSIRDY ((CR_REG_INDEX << 5U) | RCC_CR_MSIRDY_Pos) /*!< MSI Ready flag */ -#define RCC_FLAG_HSIRDY ((CR_REG_INDEX << 5U) | RCC_CR_HSIRDY_Pos) /*!< HSI Ready flag */ -#define RCC_FLAG_HSERDY ((CR_REG_INDEX << 5U) | RCC_CR_HSERDY_Pos) /*!< HSE Ready flag */ -#define RCC_FLAG_PLLRDY ((CR_REG_INDEX << 5U) | RCC_CR_PLLRDY_Pos) /*!< PLL Ready flag */ -#if defined(RCC_PLLSAI1_SUPPORT) -#define RCC_FLAG_PLLSAI1RDY ((CR_REG_INDEX << 5U) | RCC_CR_PLLSAI1RDY_Pos) /*!< PLLSAI1 Ready flag */ -#endif /* RCC_PLLSAI1_SUPPORT */ -#if defined(RCC_PLLSAI2_SUPPORT) -#define RCC_FLAG_PLLSAI2RDY ((CR_REG_INDEX << 5U) | RCC_CR_PLLSAI2RDY_Pos) /*!< PLLSAI2 Ready flag */ -#endif /* RCC_PLLSAI2_SUPPORT */ - -/* Flags in the BDCR register */ -#define RCC_FLAG_LSERDY ((BDCR_REG_INDEX << 5U) | RCC_BDCR_LSERDY_Pos) /*!< LSE Ready flag */ -#define RCC_FLAG_LSECSSD ((BDCR_REG_INDEX << 5U) | RCC_BDCR_LSECSSD_Pos) /*!< LSE Clock Security System Interrupt flag */ - -/* Flags in the CSR register */ -#define RCC_FLAG_LSIRDY ((CSR_REG_INDEX << 5U) | RCC_CSR_LSIRDY_Pos) /*!< LSI Ready flag */ -#define RCC_FLAG_FWRST ((CSR_REG_INDEX << 5U) | RCC_CSR_FWRSTF_Pos) /*!< Firewall reset flag */ -#define RCC_FLAG_OBLRST ((CSR_REG_INDEX << 5U) | RCC_CSR_OBLRSTF_Pos) /*!< Option Byte Loader reset flag */ -#define RCC_FLAG_PINRST ((CSR_REG_INDEX << 5U) | RCC_CSR_PINRSTF_Pos) /*!< PIN reset flag */ -#define RCC_FLAG_BORRST ((CSR_REG_INDEX << 5U) | RCC_CSR_BORRSTF_Pos) /*!< BOR reset flag */ -#define RCC_FLAG_SFTRST ((CSR_REG_INDEX << 5U) | RCC_CSR_SFTRSTF_Pos) /*!< Software Reset flag */ -#define RCC_FLAG_IWDGRST ((CSR_REG_INDEX << 5U) | RCC_CSR_IWDGRSTF_Pos) /*!< Independent Watchdog reset flag */ -#define RCC_FLAG_WWDGRST ((CSR_REG_INDEX << 5U) | RCC_CSR_WWDGRSTF_Pos) /*!< Window watchdog reset flag */ -#define RCC_FLAG_LPWRRST ((CSR_REG_INDEX << 5U) | RCC_CSR_LPWRRSTF_Pos) /*!< Low-Power reset flag */ - -#if defined(RCC_HSI48_SUPPORT) -/* Flags in the CRRCR register */ -#define RCC_FLAG_HSI48RDY ((CRRCR_REG_INDEX << 5U) | RCC_CRRCR_HSI48RDY_Pos) /*!< HSI48 Ready flag */ -#endif /* RCC_HSI48_SUPPORT */ -/** - * @} - */ - -/** @defgroup RCC_LSEDrive_Config LSE Drive Config - * @{ - */ -#define RCC_LSEDRIVE_LOW 0x00000000U /*!< LSE low drive capability */ -#define RCC_LSEDRIVE_MEDIUMLOW RCC_BDCR_LSEDRV_0 /*!< LSE medium low drive capability */ -#define RCC_LSEDRIVE_MEDIUMHIGH RCC_BDCR_LSEDRV_1 /*!< LSE medium high drive capability */ -#define RCC_LSEDRIVE_HIGH RCC_BDCR_LSEDRV /*!< LSE high drive capability */ -/** - * @} - */ - -/** @defgroup RCC_Stop_WakeUpClock Wake-Up from STOP Clock - * @{ - */ -#define RCC_STOP_WAKEUPCLOCK_MSI 0x00000000U /*!< MSI selection after wake-up from STOP */ -#define RCC_STOP_WAKEUPCLOCK_HSI RCC_CFGR_STOPWUCK /*!< HSI selection after wake-up from STOP */ -/** - * @} - */ - -/** - * @} - */ - -/* Exported macros -----------------------------------------------------------*/ - -/** @defgroup RCC_Exported_Macros RCC Exported Macros - * @{ - */ - -/** @defgroup RCC_AHB1_Peripheral_Clock_Enable_Disable AHB1 Peripheral Clock Enable Disable - * @brief Enable or disable the AHB1 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ - -#define __HAL_RCC_DMA1_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_DMA1EN); \ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_DMA1EN); \ - UNUSED(tmpreg); \ - } while(0) - -#define __HAL_RCC_DMA2_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_DMA2EN); \ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_DMA2EN); \ - UNUSED(tmpreg); \ - } while(0) - -#if defined(DMAMUX1) -#define __HAL_RCC_DMAMUX1_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_DMAMUX1EN); \ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_DMAMUX1EN); \ - UNUSED(tmpreg); \ - } while(0) -#endif /* DMAMUX1 */ - -#define __HAL_RCC_FLASH_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_FLASHEN); \ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_FLASHEN); \ - UNUSED(tmpreg); \ - } while(0) - -#define __HAL_RCC_CRC_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CRCEN); \ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CRCEN); \ - UNUSED(tmpreg); \ - } while(0) - -#define __HAL_RCC_TSC_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_TSCEN); \ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_TSCEN); \ - UNUSED(tmpreg); \ - } while(0) - -#if defined(DMA2D) -#define __HAL_RCC_DMA2D_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_DMA2DEN); \ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_DMA2DEN); \ - UNUSED(tmpreg); \ - } while(0) -#endif /* DMA2D */ - -#if defined(GFXMMU) -#define __HAL_RCC_GFXMMU_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GFXMMUEN); \ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GFXMMUEN); \ - UNUSED(tmpreg); \ - } while(0) -#endif /* GFXMMU */ - - -#define __HAL_RCC_DMA1_CLK_DISABLE() CLEAR_BIT(RCC->AHB1ENR, RCC_AHB1ENR_DMA1EN) - -#define __HAL_RCC_DMA2_CLK_DISABLE() CLEAR_BIT(RCC->AHB1ENR, RCC_AHB1ENR_DMA2EN) - -#if defined(DMAMUX1) -#define __HAL_RCC_DMAMUX1_CLK_DISABLE() CLEAR_BIT(RCC->AHB1ENR, RCC_AHB1ENR_DMAMUX1EN) -#endif /* DMAMUX1 */ - -#define __HAL_RCC_FLASH_CLK_DISABLE() CLEAR_BIT(RCC->AHB1ENR, RCC_AHB1ENR_FLASHEN) - -#define __HAL_RCC_CRC_CLK_DISABLE() CLEAR_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CRCEN) - -#define __HAL_RCC_TSC_CLK_DISABLE() CLEAR_BIT(RCC->AHB1ENR, RCC_AHB1ENR_TSCEN) - -#if defined(DMA2D) -#define __HAL_RCC_DMA2D_CLK_DISABLE() CLEAR_BIT(RCC->AHB1ENR, RCC_AHB1ENR_DMA2DEN) -#endif /* DMA2D */ - -#if defined(GFXMMU) -#define __HAL_RCC_GFXMMU_CLK_DISABLE() CLEAR_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GFXMMUEN) -#endif /* GFXMMU */ - -/** - * @} - */ - -/** @defgroup RCC_AHB2_Peripheral_Clock_Enable_Disable AHB2 Peripheral Clock Enable Disable - * @brief Enable or disable the AHB2 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ - -#define __HAL_RCC_GPIOA_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_GPIOAEN); \ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_GPIOAEN); \ - UNUSED(tmpreg); \ - } while(0) - -#define __HAL_RCC_GPIOB_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_GPIOBEN); \ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_GPIOBEN); \ - UNUSED(tmpreg); \ - } while(0) - -#define __HAL_RCC_GPIOC_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_GPIOCEN); \ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_GPIOCEN); \ - UNUSED(tmpreg); \ - } while(0) - -#if defined(GPIOD) -#define __HAL_RCC_GPIOD_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_GPIODEN); \ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_GPIODEN); \ - UNUSED(tmpreg); \ - } while(0) -#endif /* GPIOD */ - -#if defined(GPIOE) -#define __HAL_RCC_GPIOE_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_GPIOEEN); \ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_GPIOEEN); \ - UNUSED(tmpreg); \ - } while(0) -#endif /* GPIOE */ - -#if defined(GPIOF) -#define __HAL_RCC_GPIOF_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_GPIOFEN); \ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_GPIOFEN); \ - UNUSED(tmpreg); \ - } while(0) -#endif /* GPIOF */ - -#if defined(GPIOG) -#define __HAL_RCC_GPIOG_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_GPIOGEN); \ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_GPIOGEN); \ - UNUSED(tmpreg); \ - } while(0) -#endif /* GPIOG */ - -#define __HAL_RCC_GPIOH_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_GPIOHEN); \ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_GPIOHEN); \ - UNUSED(tmpreg); \ - } while(0) - -#if defined(GPIOI) -#define __HAL_RCC_GPIOI_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_GPIOIEN); \ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_GPIOIEN); \ - UNUSED(tmpreg); \ - } while(0) -#endif /* GPIOI */ - -#if defined(USB_OTG_FS) -#define __HAL_RCC_USB_OTG_FS_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_OTGFSEN); \ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_OTGFSEN); \ - UNUSED(tmpreg); \ - } while(0) -#endif /* USB_OTG_FS */ - -#define __HAL_RCC_ADC_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_ADCEN); \ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_ADCEN); \ - UNUSED(tmpreg); \ - } while(0) - -#if defined(DCMI) -#define __HAL_RCC_DCMI_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_DCMIEN); \ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_DCMIEN); \ - UNUSED(tmpreg); \ - } while(0) -#endif /* DCMI */ - -#if defined(PKA) -#define __HAL_RCC_PKA_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_PKAEN); \ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_PKAEN); \ - UNUSED(tmpreg); \ - } while(0) -#endif /* PKA */ - -#if defined(AES) -#define __HAL_RCC_AES_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_AESEN); \ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_AESEN); \ - UNUSED(tmpreg); \ - } while(0) -#endif /* AES */ - -#if defined(HASH) -#define __HAL_RCC_HASH_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_HASHEN); \ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_HASHEN); \ - UNUSED(tmpreg); \ - } while(0) -#endif /* HASH */ - -#define __HAL_RCC_RNG_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_RNGEN); \ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_RNGEN); \ - UNUSED(tmpreg); \ - } while(0) - -#if defined(OCTOSPIM) -#define __HAL_RCC_OSPIM_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_OSPIMEN); \ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_OSPIMEN); \ - UNUSED(tmpreg); \ - } while(0) -#endif /* OCTOSPIM */ - -#if defined(SDMMC1) && defined(RCC_AHB2ENR_SDMMC1EN) -#define __HAL_RCC_SDMMC1_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_SDMMC1EN); \ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_SDMMC1EN); \ - UNUSED(tmpreg); \ - } while(0) -#endif /* SDMMC1 && RCC_AHB2ENR_SDMMC1EN */ - -#if defined(SDMMC2) -#define __HAL_RCC_SDMMC2_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_SDMMC2EN); \ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_SDMMC2EN); \ - UNUSED(tmpreg); \ - } while(0) -#endif /* SDMMC2 */ - - -#define __HAL_RCC_GPIOA_CLK_DISABLE() CLEAR_BIT(RCC->AHB2ENR, RCC_AHB2ENR_GPIOAEN) - -#define __HAL_RCC_GPIOB_CLK_DISABLE() CLEAR_BIT(RCC->AHB2ENR, RCC_AHB2ENR_GPIOBEN) - -#define __HAL_RCC_GPIOC_CLK_DISABLE() CLEAR_BIT(RCC->AHB2ENR, RCC_AHB2ENR_GPIOCEN) - -#if defined(GPIOD) -#define __HAL_RCC_GPIOD_CLK_DISABLE() CLEAR_BIT(RCC->AHB2ENR, RCC_AHB2ENR_GPIODEN) -#endif /* GPIOD */ - -#if defined(GPIOE) -#define __HAL_RCC_GPIOE_CLK_DISABLE() CLEAR_BIT(RCC->AHB2ENR, RCC_AHB2ENR_GPIOEEN) -#endif /* GPIOE */ - -#if defined(GPIOF) -#define __HAL_RCC_GPIOF_CLK_DISABLE() CLEAR_BIT(RCC->AHB2ENR, RCC_AHB2ENR_GPIOFEN) -#endif /* GPIOF */ - -#if defined(GPIOG) -#define __HAL_RCC_GPIOG_CLK_DISABLE() CLEAR_BIT(RCC->AHB2ENR, RCC_AHB2ENR_GPIOGEN) -#endif /* GPIOG */ - -#define __HAL_RCC_GPIOH_CLK_DISABLE() CLEAR_BIT(RCC->AHB2ENR, RCC_AHB2ENR_GPIOHEN) - -#if defined(GPIOI) -#define __HAL_RCC_GPIOI_CLK_DISABLE() CLEAR_BIT(RCC->AHB2ENR, RCC_AHB2ENR_GPIOIEN) -#endif /* GPIOI */ - -#if defined(USB_OTG_FS) -#define __HAL_RCC_USB_OTG_FS_CLK_DISABLE() CLEAR_BIT(RCC->AHB2ENR, RCC_AHB2ENR_OTGFSEN); -#endif /* USB_OTG_FS */ - -#define __HAL_RCC_ADC_CLK_DISABLE() CLEAR_BIT(RCC->AHB2ENR, RCC_AHB2ENR_ADCEN) - -#if defined(DCMI) -#define __HAL_RCC_DCMI_CLK_DISABLE() CLEAR_BIT(RCC->AHB2ENR, RCC_AHB2ENR_DCMIEN) -#endif /* DCMI */ - -#if defined(PKA) -#define __HAL_RCC_PKA_CLK_DISABLE() CLEAR_BIT(RCC->AHB2ENR, RCC_AHB2ENR_PKAEN) -#endif /* PKA */ - -#if defined(AES) -#define __HAL_RCC_AES_CLK_DISABLE() CLEAR_BIT(RCC->AHB2ENR, RCC_AHB2ENR_AESEN); -#endif /* AES */ - -#if defined(HASH) -#define __HAL_RCC_HASH_CLK_DISABLE() CLEAR_BIT(RCC->AHB2ENR, RCC_AHB2ENR_HASHEN) -#endif /* HASH */ - -#define __HAL_RCC_RNG_CLK_DISABLE() CLEAR_BIT(RCC->AHB2ENR, RCC_AHB2ENR_RNGEN) - -#if defined(OCTOSPIM) -#define __HAL_RCC_OSPIM_CLK_DISABLE() CLEAR_BIT(RCC->AHB2ENR, RCC_AHB2ENR_OSPIMEN) -#endif /* OCTOSPIM */ - -#if defined(SDMMC1) && defined(RCC_AHB2ENR_SDMMC1EN) -#define __HAL_RCC_SDMMC1_CLK_DISABLE() CLEAR_BIT(RCC->AHB2ENR, RCC_AHB2ENR_SDMMC1EN) -#endif /* SDMMC1 && RCC_AHB2ENR_SDMMC1EN */ - -#if defined(SDMMC2) -#define __HAL_RCC_SDMMC2_CLK_DISABLE() CLEAR_BIT(RCC->AHB2ENR, RCC_AHB2ENR_SDMMC2EN) -#endif /* SDMMC2 */ - -/** - * @} - */ - -/** @defgroup RCC_AHB3_Clock_Enable_Disable AHB3 Peripheral Clock Enable Disable - * @brief Enable or disable the AHB3 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ - -#if defined(FMC_BANK1) -#define __HAL_RCC_FMC_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN); \ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN); \ - UNUSED(tmpreg); \ - } while(0) -#endif /* FMC_BANK1 */ - -#if defined(QUADSPI) -#define __HAL_RCC_QSPI_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->AHB3ENR, RCC_AHB3ENR_QSPIEN); \ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_QSPIEN); \ - UNUSED(tmpreg); \ - } while(0) -#endif /* QUADSPI */ - -#if defined(OCTOSPI1) -#define __HAL_RCC_OSPI1_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->AHB3ENR, RCC_AHB3ENR_OSPI1EN); \ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_OSPI1EN); \ - UNUSED(tmpreg); \ - } while(0) -#endif /* OCTOSPI1 */ - -#if defined(OCTOSPI2) -#define __HAL_RCC_OSPI2_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->AHB3ENR, RCC_AHB3ENR_OSPI2EN); \ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_OSPI2EN); \ - UNUSED(tmpreg); \ - } while(0) -#endif /* OCTOSPI2 */ - -#if defined(FMC_BANK1) -#define __HAL_RCC_FMC_CLK_DISABLE() CLEAR_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN) -#endif /* FMC_BANK1 */ - -#if defined(QUADSPI) -#define __HAL_RCC_QSPI_CLK_DISABLE() CLEAR_BIT(RCC->AHB3ENR, RCC_AHB3ENR_QSPIEN) -#endif /* QUADSPI */ - -#if defined(OCTOSPI1) -#define __HAL_RCC_OSPI1_CLK_DISABLE() CLEAR_BIT(RCC->AHB3ENR, RCC_AHB3ENR_OSPI1EN) -#endif /* OCTOSPI1 */ - -#if defined(OCTOSPI2) -#define __HAL_RCC_OSPI2_CLK_DISABLE() CLEAR_BIT(RCC->AHB3ENR, RCC_AHB3ENR_OSPI2EN) -#endif /* OCTOSPI2 */ - -/** - * @} - */ - -/** @defgroup RCC_APB1_Clock_Enable_Disable APB1 Peripheral Clock Enable Disable - * @brief Enable or disable the APB1 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ - -#define __HAL_RCC_TIM2_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB1ENR1, RCC_APB1ENR1_TIM2EN); \ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_TIM2EN); \ - UNUSED(tmpreg); \ - } while(0) - -#if defined(TIM3) -#define __HAL_RCC_TIM3_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB1ENR1, RCC_APB1ENR1_TIM3EN); \ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_TIM3EN); \ - UNUSED(tmpreg); \ - } while(0) -#endif /* TIM3 */ - -#if defined(TIM4) -#define __HAL_RCC_TIM4_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB1ENR1, RCC_APB1ENR1_TIM4EN); \ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_TIM4EN); \ - UNUSED(tmpreg); \ - } while(0) -#endif /* TIM4 */ - -#if defined(TIM5) -#define __HAL_RCC_TIM5_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB1ENR1, RCC_APB1ENR1_TIM5EN); \ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_TIM5EN); \ - UNUSED(tmpreg); \ - } while(0) -#endif /* TIM5 */ - -#define __HAL_RCC_TIM6_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB1ENR1, RCC_APB1ENR1_TIM6EN); \ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_TIM6EN); \ - UNUSED(tmpreg); \ - } while(0) - -#if defined(TIM7) -#define __HAL_RCC_TIM7_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB1ENR1, RCC_APB1ENR1_TIM7EN); \ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_TIM7EN); \ - UNUSED(tmpreg); \ - } while(0) -#endif /* TIM7 */ - -#if defined(LCD) -#define __HAL_RCC_LCD_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB1ENR1, RCC_APB1ENR1_LCDEN); \ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_LCDEN); \ - UNUSED(tmpreg); \ - } while(0) -#endif /* LCD */ - -#if defined(RCC_APB1ENR1_RTCAPBEN) -#define __HAL_RCC_RTCAPB_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB1ENR1, RCC_APB1ENR1_RTCAPBEN); \ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_RTCAPBEN); \ - UNUSED(tmpreg); \ - } while(0) -#endif /* RCC_APB1ENR1_RTCAPBEN */ - -#define __HAL_RCC_WWDG_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB1ENR1, RCC_APB1ENR1_WWDGEN); \ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_WWDGEN); \ - UNUSED(tmpreg); \ - } while(0) - -#if defined(SPI2) -#define __HAL_RCC_SPI2_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB1ENR1, RCC_APB1ENR1_SPI2EN); \ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_SPI2EN); \ - UNUSED(tmpreg); \ - } while(0) -#endif /* SPI2 */ - -#if defined(SPI3) -#define __HAL_RCC_SPI3_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB1ENR1, RCC_APB1ENR1_SPI3EN); \ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_SPI3EN); \ - UNUSED(tmpreg); \ - } while(0) -#endif /* SPI3 */ - -#define __HAL_RCC_USART2_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB1ENR1, RCC_APB1ENR1_USART2EN); \ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_USART2EN); \ - UNUSED(tmpreg); \ - } while(0) - -#if defined(USART3) -#define __HAL_RCC_USART3_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB1ENR1, RCC_APB1ENR1_USART3EN); \ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_USART3EN); \ - UNUSED(tmpreg); \ - } while(0) -#endif /* USART3 */ - -#if defined(UART4) -#define __HAL_RCC_UART4_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB1ENR1, RCC_APB1ENR1_UART4EN); \ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_UART4EN); \ - UNUSED(tmpreg); \ - } while(0) -#endif /* UART4 */ - -#if defined(UART5) -#define __HAL_RCC_UART5_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB1ENR1, RCC_APB1ENR1_UART5EN); \ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_UART5EN); \ - UNUSED(tmpreg); \ - } while(0) -#endif /* UART5 */ - -#define __HAL_RCC_I2C1_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB1ENR1, RCC_APB1ENR1_I2C1EN); \ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_I2C1EN); \ - UNUSED(tmpreg); \ - } while(0) - -#if defined(I2C2) -#define __HAL_RCC_I2C2_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB1ENR1, RCC_APB1ENR1_I2C2EN); \ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_I2C2EN); \ - UNUSED(tmpreg); \ - } while(0) -#endif /* I2C2 */ - -#define __HAL_RCC_I2C3_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB1ENR1, RCC_APB1ENR1_I2C3EN); \ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_I2C3EN); \ - UNUSED(tmpreg); \ - } while(0) - -#if defined(I2C4) -#define __HAL_RCC_I2C4_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB1ENR2, RCC_APB1ENR2_I2C4EN); \ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR2, RCC_APB1ENR2_I2C4EN); \ - UNUSED(tmpreg); \ - } while(0) -#endif /* I2C4 */ - -#if defined(CRS) -#define __HAL_RCC_CRS_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB1ENR1, RCC_APB1ENR1_CRSEN); \ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_CRSEN); \ - UNUSED(tmpreg); \ - } while(0) -#endif /* CRS */ - -#if defined(CAN1) -#define __HAL_RCC_CAN1_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB1ENR1, RCC_APB1ENR1_CAN1EN); \ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_CAN1EN); \ - UNUSED(tmpreg); \ - } while(0) -#endif /* CAN1 */ - -#if defined(CAN2) -#define __HAL_RCC_CAN2_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB1ENR1, RCC_APB1ENR1_CAN2EN); \ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_CAN2EN); \ - UNUSED(tmpreg); \ - } while(0) -#endif /* CAN2 */ - -#if defined(USB) -#define __HAL_RCC_USB_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB1ENR1, RCC_APB1ENR1_USBFSEN); \ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_USBFSEN); \ - UNUSED(tmpreg); \ - } while(0) -#endif /* USB */ - -#define __HAL_RCC_PWR_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB1ENR1, RCC_APB1ENR1_PWREN); \ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_PWREN); \ - UNUSED(tmpreg); \ - } while(0) - -#if defined(DAC1) -#define __HAL_RCC_DAC1_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB1ENR1, RCC_APB1ENR1_DAC1EN); \ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_DAC1EN); \ - UNUSED(tmpreg); \ - } while(0) -#endif /* DAC1 */ - -#define __HAL_RCC_OPAMP_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB1ENR1, RCC_APB1ENR1_OPAMPEN); \ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_OPAMPEN); \ - UNUSED(tmpreg); \ - } while(0) - -#define __HAL_RCC_LPTIM1_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB1ENR1, RCC_APB1ENR1_LPTIM1EN); \ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_LPTIM1EN); \ - UNUSED(tmpreg); \ - } while(0) - -#define __HAL_RCC_LPUART1_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB1ENR2, RCC_APB1ENR2_LPUART1EN); \ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR2, RCC_APB1ENR2_LPUART1EN); \ - UNUSED(tmpreg); \ - } while(0) - -#if defined(SWPMI1) -#define __HAL_RCC_SWPMI1_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB1ENR2, RCC_APB1ENR2_SWPMI1EN); \ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR2, RCC_APB1ENR2_SWPMI1EN); \ - UNUSED(tmpreg); \ - } while(0) -#endif /* SWPMI1 */ - -#define __HAL_RCC_LPTIM2_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB1ENR2, RCC_APB1ENR2_LPTIM2EN); \ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR2, RCC_APB1ENR2_LPTIM2EN); \ - UNUSED(tmpreg); \ - } while(0) - - -#define __HAL_RCC_TIM2_CLK_DISABLE() CLEAR_BIT(RCC->APB1ENR1, RCC_APB1ENR1_TIM2EN) - -#if defined(TIM3) -#define __HAL_RCC_TIM3_CLK_DISABLE() CLEAR_BIT(RCC->APB1ENR1, RCC_APB1ENR1_TIM3EN) -#endif /* TIM3 */ - -#if defined(TIM4) -#define __HAL_RCC_TIM4_CLK_DISABLE() CLEAR_BIT(RCC->APB1ENR1, RCC_APB1ENR1_TIM4EN) -#endif /* TIM4 */ - -#if defined(TIM5) -#define __HAL_RCC_TIM5_CLK_DISABLE() CLEAR_BIT(RCC->APB1ENR1, RCC_APB1ENR1_TIM5EN) -#endif /* TIM5 */ - -#define __HAL_RCC_TIM6_CLK_DISABLE() CLEAR_BIT(RCC->APB1ENR1, RCC_APB1ENR1_TIM6EN) - -#if defined(TIM7) -#define __HAL_RCC_TIM7_CLK_DISABLE() CLEAR_BIT(RCC->APB1ENR1, RCC_APB1ENR1_TIM7EN) -#endif /* TIM7 */ - -#if defined(LCD) -#define __HAL_RCC_LCD_CLK_DISABLE() CLEAR_BIT(RCC->APB1ENR1, RCC_APB1ENR1_LCDEN); -#endif /* LCD */ - -#if defined(RCC_APB1ENR1_RTCAPBEN) -#define __HAL_RCC_RTCAPB_CLK_DISABLE() CLEAR_BIT(RCC->APB1ENR1, RCC_APB1ENR1_RTCAPBEN); -#endif /* RCC_APB1ENR1_RTCAPBEN */ - -#if defined(SPI2) -#define __HAL_RCC_SPI2_CLK_DISABLE() CLEAR_BIT(RCC->APB1ENR1, RCC_APB1ENR1_SPI2EN) -#endif /* SPI2 */ - -#if defined(SPI3) -#define __HAL_RCC_SPI3_CLK_DISABLE() CLEAR_BIT(RCC->APB1ENR1, RCC_APB1ENR1_SPI3EN) -#endif /* SPI3 */ - -#define __HAL_RCC_USART2_CLK_DISABLE() CLEAR_BIT(RCC->APB1ENR1, RCC_APB1ENR1_USART2EN) - -#if defined(USART3) -#define __HAL_RCC_USART3_CLK_DISABLE() CLEAR_BIT(RCC->APB1ENR1, RCC_APB1ENR1_USART3EN) -#endif /* USART3 */ - -#if defined(UART4) -#define __HAL_RCC_UART4_CLK_DISABLE() CLEAR_BIT(RCC->APB1ENR1, RCC_APB1ENR1_UART4EN) -#endif /* UART4 */ - -#if defined(UART5) -#define __HAL_RCC_UART5_CLK_DISABLE() CLEAR_BIT(RCC->APB1ENR1, RCC_APB1ENR1_UART5EN) -#endif /* UART5 */ - -#define __HAL_RCC_I2C1_CLK_DISABLE() CLEAR_BIT(RCC->APB1ENR1, RCC_APB1ENR1_I2C1EN) - -#if defined(I2C2) -#define __HAL_RCC_I2C2_CLK_DISABLE() CLEAR_BIT(RCC->APB1ENR1, RCC_APB1ENR1_I2C2EN) -#endif /* I2C2 */ - -#define __HAL_RCC_I2C3_CLK_DISABLE() CLEAR_BIT(RCC->APB1ENR1, RCC_APB1ENR1_I2C3EN) - -#if defined(I2C4) -#define __HAL_RCC_I2C4_CLK_DISABLE() CLEAR_BIT(RCC->APB1ENR2, RCC_APB1ENR2_I2C4EN) -#endif /* I2C4 */ - -#if defined(CRS) -#define __HAL_RCC_CRS_CLK_DISABLE() CLEAR_BIT(RCC->APB1ENR1, RCC_APB1ENR1_CRSEN); -#endif /* CRS */ - -#if defined(CAN1) -#define __HAL_RCC_CAN1_CLK_DISABLE() CLEAR_BIT(RCC->APB1ENR1, RCC_APB1ENR1_CAN1EN) -#endif /* CAN1 */ - -#if defined(CAN2) -#define __HAL_RCC_CAN2_CLK_DISABLE() CLEAR_BIT(RCC->APB1ENR1, RCC_APB1ENR1_CAN2EN) -#endif /* CAN2 */ - -#if defined(USB) -#define __HAL_RCC_USB_CLK_DISABLE() CLEAR_BIT(RCC->APB1ENR1, RCC_APB1ENR1_USBFSEN); -#endif /* USB */ - -#define __HAL_RCC_PWR_CLK_DISABLE() CLEAR_BIT(RCC->APB1ENR1, RCC_APB1ENR1_PWREN) - -#if defined(DAC1) -#define __HAL_RCC_DAC1_CLK_DISABLE() CLEAR_BIT(RCC->APB1ENR1, RCC_APB1ENR1_DAC1EN) -#endif /* DAC1 */ - -#define __HAL_RCC_OPAMP_CLK_DISABLE() CLEAR_BIT(RCC->APB1ENR1, RCC_APB1ENR1_OPAMPEN) - -#define __HAL_RCC_LPTIM1_CLK_DISABLE() CLEAR_BIT(RCC->APB1ENR1, RCC_APB1ENR1_LPTIM1EN) - -#define __HAL_RCC_LPUART1_CLK_DISABLE() CLEAR_BIT(RCC->APB1ENR2, RCC_APB1ENR2_LPUART1EN) - -#if defined(SWPMI1) -#define __HAL_RCC_SWPMI1_CLK_DISABLE() CLEAR_BIT(RCC->APB1ENR2, RCC_APB1ENR2_SWPMI1EN) -#endif /* SWPMI1 */ - -#define __HAL_RCC_LPTIM2_CLK_DISABLE() CLEAR_BIT(RCC->APB1ENR2, RCC_APB1ENR2_LPTIM2EN) - -/** - * @} - */ - -/** @defgroup RCC_APB2_Clock_Enable_Disable APB2 Peripheral Clock Enable Disable - * @brief Enable or disable the APB2 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ - -#define __HAL_RCC_SYSCFG_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SYSCFGEN); \ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SYSCFGEN); \ - UNUSED(tmpreg); \ - } while(0) - -#define __HAL_RCC_FIREWALL_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_FWEN); \ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_FWEN); \ - UNUSED(tmpreg); \ - } while(0) - -#if defined(SDMMC1) && defined(RCC_APB2ENR_SDMMC1EN) -#define __HAL_RCC_SDMMC1_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SDMMC1EN); \ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SDMMC1EN); \ - UNUSED(tmpreg); \ - } while(0) -#endif /* SDMMC1 && RCC_APB2ENR_SDMMC1EN */ - -#define __HAL_RCC_TIM1_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM1EN); \ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM1EN); \ - UNUSED(tmpreg); \ - } while(0) - -#define __HAL_RCC_SPI1_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI1EN); \ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI1EN); \ - UNUSED(tmpreg); \ - } while(0) - -#if defined(TIM8) -#define __HAL_RCC_TIM8_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM8EN); \ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM8EN); \ - UNUSED(tmpreg); \ - } while(0) -#endif /* TIM8 */ - -#define __HAL_RCC_USART1_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_USART1EN); \ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_USART1EN); \ - UNUSED(tmpreg); \ - } while(0) - - -#define __HAL_RCC_TIM15_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM15EN); \ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM15EN); \ - UNUSED(tmpreg); \ - } while(0) - -#define __HAL_RCC_TIM16_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM16EN); \ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM16EN); \ - UNUSED(tmpreg); \ - } while(0) - -#if defined(TIM17) -#define __HAL_RCC_TIM17_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM17EN); \ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM17EN); \ - UNUSED(tmpreg); \ - } while(0) -#endif /* TIM17 */ - -#if defined(SAI1) -#define __HAL_RCC_SAI1_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SAI1EN); \ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SAI1EN); \ - UNUSED(tmpreg); \ - } while(0) -#endif /* SAI1 */ - -#if defined(SAI2) -#define __HAL_RCC_SAI2_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SAI2EN); \ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SAI2EN); \ - UNUSED(tmpreg); \ - } while(0) -#endif /* SAI2 */ - -#if defined(DFSDM1_Filter0) -#define __HAL_RCC_DFSDM1_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_DFSDM1EN); \ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_DFSDM1EN); \ - UNUSED(tmpreg); \ - } while(0) -#endif /* DFSDM1_Filter0 */ - -#if defined(LTDC) -#define __HAL_RCC_LTDC_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_LTDCEN); \ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_LTDCEN); \ - UNUSED(tmpreg); \ - } while(0) -#endif /* LTDC */ - -#if defined(DSI) -#define __HAL_RCC_DSI_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_DSIEN); \ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_DSIEN); \ - UNUSED(tmpreg); \ - } while(0) -#endif /* DSI */ - - -#define __HAL_RCC_SYSCFG_CLK_DISABLE() CLEAR_BIT(RCC->APB2ENR, RCC_APB2ENR_SYSCFGEN) - -#if defined(SDMMC1) && defined(RCC_APB2ENR_SDMMC1EN) -#define __HAL_RCC_SDMMC1_CLK_DISABLE() CLEAR_BIT(RCC->APB2ENR, RCC_APB2ENR_SDMMC1EN) -#endif /* SDMMC1 && RCC_APB2ENR_SDMMC1EN */ - -#define __HAL_RCC_TIM1_CLK_DISABLE() CLEAR_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM1EN) - -#define __HAL_RCC_SPI1_CLK_DISABLE() CLEAR_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI1EN) - -#if defined(TIM8) -#define __HAL_RCC_TIM8_CLK_DISABLE() CLEAR_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM8EN) -#endif /* TIM8 */ - -#define __HAL_RCC_USART1_CLK_DISABLE() CLEAR_BIT(RCC->APB2ENR, RCC_APB2ENR_USART1EN) - -#define __HAL_RCC_TIM15_CLK_DISABLE() CLEAR_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM15EN) - -#define __HAL_RCC_TIM16_CLK_DISABLE() CLEAR_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM16EN) - -#if defined(TIM17) -#define __HAL_RCC_TIM17_CLK_DISABLE() CLEAR_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM17EN) -#endif /* TIM17 */ - -#if defined(SAI1) -#define __HAL_RCC_SAI1_CLK_DISABLE() CLEAR_BIT(RCC->APB2ENR, RCC_APB2ENR_SAI1EN) -#endif /* SAI1 */ - -#if defined(SAI2) -#define __HAL_RCC_SAI2_CLK_DISABLE() CLEAR_BIT(RCC->APB2ENR, RCC_APB2ENR_SAI2EN) -#endif /* SAI2 */ - -#if defined(DFSDM1_Filter0) -#define __HAL_RCC_DFSDM1_CLK_DISABLE() CLEAR_BIT(RCC->APB2ENR, RCC_APB2ENR_DFSDM1EN) -#endif /* DFSDM1_Filter0 */ - -#if defined(LTDC) -#define __HAL_RCC_LTDC_CLK_DISABLE() CLEAR_BIT(RCC->APB2ENR, RCC_APB2ENR_LTDCEN) -#endif /* LTDC */ - -#if defined(DSI) -#define __HAL_RCC_DSI_CLK_DISABLE() CLEAR_BIT(RCC->APB2ENR, RCC_APB2ENR_DSIEN) -#endif /* DSI */ - -/** - * @} - */ - -/** @defgroup RCC_AHB1_Peripheral_Clock_Enable_Disable_Status AHB1 Peripheral Clock Enabled or Disabled Status - * @brief Check whether the AHB1 peripheral clock is enabled or not. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ - -#define __HAL_RCC_DMA1_IS_CLK_ENABLED() (READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_DMA1EN) != 0U) - -#define __HAL_RCC_DMA2_IS_CLK_ENABLED() (READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_DMA2EN) != 0U) - -#if defined(DMAMUX1) -#define __HAL_RCC_DMAMUX1_IS_CLK_ENABLED() (READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_DMAMUX1EN) != 0U) -#endif /* DMAMUX1 */ - -#define __HAL_RCC_FLASH_IS_CLK_ENABLED() (READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_FLASHEN) != 0U) - -#define __HAL_RCC_CRC_IS_CLK_ENABLED() (READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CRCEN) != 0U) - -#define __HAL_RCC_TSC_IS_CLK_ENABLED() (READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_TSCEN) != 0U) - -#if defined(DMA2D) -#define __HAL_RCC_DMA2D_IS_CLK_ENABLED() (READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_DMA2DEN) != 0U) -#endif /* DMA2D */ - -#if defined(GFXMMU) -#define __HAL_RCC_GFXMMU_IS_CLK_ENABLED() (READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GFXMMUEN) != 0U) -#endif /* GFXMMU */ - - -#define __HAL_RCC_DMA1_IS_CLK_DISABLED() (READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_DMA1EN) == 0U) - -#define __HAL_RCC_DMA2_IS_CLK_DISABLED() (READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_DMA2EN) == 0U) - -#if defined(DMAMUX1) -#define __HAL_RCC_DMAMUX1_IS_CLK_DISABLED() (READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_DMAMUX1EN) == 0U) -#endif /* DMAMUX1 */ - -#define __HAL_RCC_FLASH_IS_CLK_DISABLED() (READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_FLASHEN) == 0U) - -#define __HAL_RCC_CRC_IS_CLK_DISABLED() (READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CRCEN) == 0U) - -#define __HAL_RCC_TSC_IS_CLK_DISABLED() (READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_TSCEN) == 0U) - -#if defined(DMA2D) -#define __HAL_RCC_DMA2D_IS_CLK_DISABLED() (READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_DMA2DEN) == 0U) -#endif /* DMA2D */ - -#if defined(GFXMMU) -#define __HAL_RCC_GFXMMU_IS_CLK_DISABLED() (READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GFXMMUEN) == 0U) -#endif /* GFXMMU */ - -/** - * @} - */ - -/** @defgroup RCC_AHB2_Clock_Enable_Disable_Status AHB2 Peripheral Clock Enabled or Disabled Status - * @brief Check whether the AHB2 peripheral clock is enabled or not. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ - -#define __HAL_RCC_GPIOA_IS_CLK_ENABLED() (READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_GPIOAEN) != 0U) - -#define __HAL_RCC_GPIOB_IS_CLK_ENABLED() (READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_GPIOBEN) != 0U) - -#define __HAL_RCC_GPIOC_IS_CLK_ENABLED() (READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_GPIOCEN) != 0U) - -#if defined(GPIOD) -#define __HAL_RCC_GPIOD_IS_CLK_ENABLED() (READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_GPIODEN) != 0U) -#endif /* GPIOD */ - -#if defined(GPIOE) -#define __HAL_RCC_GPIOE_IS_CLK_ENABLED() (READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_GPIOEEN) != 0U) -#endif /* GPIOE */ - -#if defined(GPIOF) -#define __HAL_RCC_GPIOF_IS_CLK_ENABLED() (READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_GPIOFEN) != 0U) -#endif /* GPIOF */ - -#if defined(GPIOG) -#define __HAL_RCC_GPIOG_IS_CLK_ENABLED() (READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_GPIOGEN) != 0U) -#endif /* GPIOG */ - -#define __HAL_RCC_GPIOH_IS_CLK_ENABLED() (READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_GPIOHEN) != 0U) - -#if defined(GPIOI) -#define __HAL_RCC_GPIOI_IS_CLK_ENABLED() (READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_GPIOIEN) != 0U) -#endif /* GPIOI */ - -#if defined(USB_OTG_FS) -#define __HAL_RCC_USB_OTG_FS_IS_CLK_ENABLED() (READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_OTGFSEN) != 0U) -#endif /* USB_OTG_FS */ - -#define __HAL_RCC_ADC_IS_CLK_ENABLED() (READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_ADCEN) != 0U) - -#if defined(DCMI) -#define __HAL_RCC_DCMI_IS_CLK_ENABLED() (READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_DCMIEN) != 0U) -#endif /* DCMI */ - -#if defined(PKA) -#define __HAL_RCC_PKA_IS_CLK_ENABLED() (READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_PKAEN) != 0U) -#endif /* PKA */ - -#if defined(AES) -#define __HAL_RCC_AES_IS_CLK_ENABLED() (READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_AESEN) != 0U) -#endif /* AES */ - -#if defined(HASH) -#define __HAL_RCC_HASH_IS_CLK_ENABLED() (READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_HASHEN) != 0U) -#endif /* HASH */ - -#define __HAL_RCC_RNG_IS_CLK_ENABLED() (READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_RNGEN) != 0U) - -#if defined(OCTOSPIM) -#define __HAL_RCC_OSPIM_IS_CLK_ENABLED() (READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_OSPIMEN) != 0U) -#endif /* OCTOSPIM */ - -#if defined(SDMMC1) && defined(RCC_AHB2ENR_SDMMC1EN) -#define __HAL_RCC_SDMMC1_IS_CLK_ENABLED() (READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_SDMMC1EN) != 0U) -#endif /* SDMMC1 && RCC_AHB2ENR_SDMMC1EN */ - -#if defined(SDMMC2) -#define __HAL_RCC_SDMMC2_IS_CLK_ENABLED() (READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_SDMMC2EN) != 0U) -#endif /* SDMMC2 */ - - -#define __HAL_RCC_GPIOA_IS_CLK_DISABLED() (READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_GPIOAEN) == 0U) - -#define __HAL_RCC_GPIOB_IS_CLK_DISABLED() (READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_GPIOBEN) == 0U) - -#define __HAL_RCC_GPIOC_IS_CLK_DISABLED() (READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_GPIOCEN) == 0U) - -#if defined(GPIOD) -#define __HAL_RCC_GPIOD_IS_CLK_DISABLED() (READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_GPIODEN) == 0U) -#endif /* GPIOD */ - -#if defined(GPIOE) -#define __HAL_RCC_GPIOE_IS_CLK_DISABLED() (READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_GPIOEEN) == 0U) -#endif /* GPIOE */ - -#if defined(GPIOF) -#define __HAL_RCC_GPIOF_IS_CLK_DISABLED() (READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_GPIOFEN) == 0U) -#endif /* GPIOF */ - -#if defined(GPIOG) -#define __HAL_RCC_GPIOG_IS_CLK_DISABLED() (READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_GPIOGEN) == 0U) -#endif /* GPIOG */ - -#define __HAL_RCC_GPIOH_IS_CLK_DISABLED() (READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_GPIOHEN) == 0U) - -#if defined(GPIOI) -#define __HAL_RCC_GPIOI_IS_CLK_DISABLED() (READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_GPIOIEN) == 0U) -#endif /* GPIOI */ - -#if defined(USB_OTG_FS) -#define __HAL_RCC_USB_OTG_FS_IS_CLK_DISABLED() (READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_OTGFSEN) == 0U) -#endif /* USB_OTG_FS */ - -#define __HAL_RCC_ADC_IS_CLK_DISABLED() (READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_ADCEN) == 0U) - -#if defined(DCMI) -#define __HAL_RCC_DCMI_IS_CLK_DISABLED() (READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_DCMIEN) == 0U) -#endif /* DCMI */ - -#if defined(PKA) -#define __HAL_RCC_PKA_IS_CLK_DISABLED() (READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_PKAEN) == 0U) -#endif /* PKA */ - -#if defined(AES) -#define __HAL_RCC_AES_IS_CLK_DISABLED() (READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_AESEN) == 0U) -#endif /* AES */ - -#if defined(HASH) -#define __HAL_RCC_HASH_IS_CLK_DISABLED() (READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_HASHEN) == 0U) -#endif /* HASH */ - -#define __HAL_RCC_RNG_IS_CLK_DISABLED() (READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_RNGEN) == 0U) - -#if defined(OCTOSPIM) -#define __HAL_RCC_OSPIM_IS_CLK_DISABLED() (READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_OSPIMEN) == 0U) -#endif /* OCTOSPIM */ - -#if defined(SDMMC1) && defined(RCC_AHB2ENR_SDMMC1EN) -#define __HAL_RCC_SDMMC1_IS_CLK_DISABLED() (READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_SDMMC1EN) == 0U) -#endif /* SDMMC1 && RCC_AHB2ENR_SDMMC1EN */ - -#if defined(SDMMC2) -#define __HAL_RCC_SDMMC2_IS_CLK_DISABLED() (READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_SDMMC2EN) == 0U) -#endif /* SDMMC2 */ - -/** - * @} - */ - -/** @defgroup RCC_AHB3_Clock_Enable_Disable_Status AHB3 Peripheral Clock Enabled or Disabled Status - * @brief Check whether the AHB3 peripheral clock is enabled or not. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ - -#if defined(FMC_BANK1) -#define __HAL_RCC_FMC_IS_CLK_ENABLED() (READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN) != 0U) -#endif /* FMC_BANK1 */ - -#if defined(QUADSPI) -#define __HAL_RCC_QSPI_IS_CLK_ENABLED() (READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_QSPIEN) != 0U) -#endif /* QUADSPI */ - -#if defined(OCTOSPI1) -#define __HAL_RCC_OSPI1_IS_CLK_ENABLED() (READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_OSPI1EN) != 0U) -#endif /* OCTOSPI1 */ - -#if defined(OCTOSPI2) -#define __HAL_RCC_OSPI2_IS_CLK_ENABLED() (READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_OSPI2EN) != 0U) -#endif /* OCTOSPI2 */ - -#if defined(FMC_BANK1) -#define __HAL_RCC_FMC_IS_CLK_DISABLED() (READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN) == 0U) -#endif /* FMC_BANK1 */ - -#if defined(QUADSPI) -#define __HAL_RCC_QSPI_IS_CLK_DISABLED() (READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_QSPIEN) == 0U) -#endif /* QUADSPI */ - -#if defined(OCTOSPI1) -#define __HAL_RCC_OSPI1_IS_CLK_DISABLED() (READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_OSPI1EN) == 0U) -#endif /* OCTOSPI1 */ - -#if defined(OCTOSPI2) -#define __HAL_RCC_OSPI2_IS_CLK_DISABLED() (READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_OSPI2EN) == 0U) -#endif /* OCTOSPI2 */ - -/** - * @} - */ - -/** @defgroup RCC_APB1_Clock_Enable_Disable_Status APB1 Peripheral Clock Enabled or Disabled Status - * @brief Check whether the APB1 peripheral clock is enabled or not. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ - -#define __HAL_RCC_TIM2_IS_CLK_ENABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_TIM2EN) != 0U) - -#if defined(TIM3) -#define __HAL_RCC_TIM3_IS_CLK_ENABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_TIM3EN) != 0U) -#endif /* TIM3 */ - -#if defined(TIM4) -#define __HAL_RCC_TIM4_IS_CLK_ENABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_TIM4EN) != 0U) -#endif /* TIM4 */ - -#if defined(TIM5) -#define __HAL_RCC_TIM5_IS_CLK_ENABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_TIM5EN) != 0U) -#endif /* TIM5 */ - -#define __HAL_RCC_TIM6_IS_CLK_ENABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_TIM6EN) != 0U) - -#if defined(TIM7) -#define __HAL_RCC_TIM7_IS_CLK_ENABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_TIM7EN) != 0U) -#endif /* TIM7 */ - -#if defined(LCD) -#define __HAL_RCC_LCD_IS_CLK_ENABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_LCDEN) != 0U) -#endif /* LCD */ - -#if defined(RCC_APB1ENR1_RTCAPBEN) -#define __HAL_RCC_RTCAPB_IS_CLK_ENABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_RTCAPBEN) != 0U) -#endif /* RCC_APB1ENR1_RTCAPBEN */ - -#define __HAL_RCC_WWDG_IS_CLK_ENABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_WWDGEN) != 0U) - -#if defined(SPI2) -#define __HAL_RCC_SPI2_IS_CLK_ENABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_SPI2EN) != 0U) -#endif /* SPI2 */ - -#if defined(SPI3) -#define __HAL_RCC_SPI3_IS_CLK_ENABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_SPI3EN) != 0U) -#endif /* SPI3 */ - -#define __HAL_RCC_USART2_IS_CLK_ENABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_USART2EN) != 0U) - -#if defined(USART3) -#define __HAL_RCC_USART3_IS_CLK_ENABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_USART3EN) != 0U) -#endif /* USART3 */ - -#if defined(UART4) -#define __HAL_RCC_UART4_IS_CLK_ENABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_UART4EN) != 0U) -#endif /* UART4 */ - -#if defined(UART5) -#define __HAL_RCC_UART5_IS_CLK_ENABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_UART5EN) != 0U) -#endif /* UART5 */ - -#define __HAL_RCC_I2C1_IS_CLK_ENABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_I2C1EN) != 0U) - -#if defined(I2C2) -#define __HAL_RCC_I2C2_IS_CLK_ENABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_I2C2EN) != 0U) -#endif /* I2C2 */ - -#define __HAL_RCC_I2C3_IS_CLK_ENABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_I2C3EN) != 0U) - -#if defined(I2C4) -#define __HAL_RCC_I2C4_IS_CLK_ENABLED() (READ_BIT(RCC->APB1ENR2, RCC_APB1ENR2_I2C4EN) != 0U) -#endif /* I2C4 */ - -#if defined(CRS) -#define __HAL_RCC_CRS_IS_CLK_ENABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_CRSEN) != 0U) -#endif /* CRS */ - -#if defined(CAN1) -#define __HAL_RCC_CAN1_IS_CLK_ENABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_CAN1EN) != 0U) -#endif /* CAN1 */ - -#if defined(CAN2) -#define __HAL_RCC_CAN2_IS_CLK_ENABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_CAN2EN) != 0U) -#endif /* CAN2 */ - -#if defined(USB) -#define __HAL_RCC_USB_IS_CLK_ENABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_USBFSEN) != 0U) -#endif /* USB */ - -#define __HAL_RCC_PWR_IS_CLK_ENABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_PWREN) != 0U) - -#if defined(DAC1) -#define __HAL_RCC_DAC1_IS_CLK_ENABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_DAC1EN) != 0U) -#endif /* DAC1 */ - -#define __HAL_RCC_OPAMP_IS_CLK_ENABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_OPAMPEN) != 0U) - -#define __HAL_RCC_LPTIM1_IS_CLK_ENABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_LPTIM1EN) != 0U) - -#define __HAL_RCC_LPUART1_IS_CLK_ENABLED() (READ_BIT(RCC->APB1ENR2, RCC_APB1ENR2_LPUART1EN) != 0U) - -#if defined(SWPMI1) -#define __HAL_RCC_SWPMI1_IS_CLK_ENABLED() (READ_BIT(RCC->APB1ENR2, RCC_APB1ENR2_SWPMI1EN) != 0U) -#endif /* SWPMI1 */ - -#define __HAL_RCC_LPTIM2_IS_CLK_ENABLED() (READ_BIT(RCC->APB1ENR2, RCC_APB1ENR2_LPTIM2EN) != 0U) - - -#define __HAL_RCC_TIM2_IS_CLK_DISABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_TIM2EN) == 0U) - -#if defined(TIM3) -#define __HAL_RCC_TIM3_IS_CLK_DISABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_TIM3EN) == 0U) -#endif /* TIM3 */ - -#if defined(TIM4) -#define __HAL_RCC_TIM4_IS_CLK_DISABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_TIM4EN) == 0U) -#endif /* TIM4 */ - -#if defined(TIM5) -#define __HAL_RCC_TIM5_IS_CLK_DISABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_TIM5EN) == 0U) -#endif /* TIM5 */ - -#define __HAL_RCC_TIM6_IS_CLK_DISABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_TIM6EN) == 0U) - -#if defined(TIM7) -#define __HAL_RCC_TIM7_IS_CLK_DISABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_TIM7EN) == 0U) -#endif /* TIM7 */ - -#if defined(LCD) -#define __HAL_RCC_LCD_IS_CLK_DISABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_LCDEN) == 0U) -#endif /* LCD */ - -#if defined(RCC_APB1ENR1_RTCAPBEN) -#define __HAL_RCC_RTCAPB_IS_CLK_DISABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_RTCAPBEN) == 0U) -#endif /* RCC_APB1ENR1_RTCAPBEN */ - -#define __HAL_RCC_WWDG_IS_CLK_DISABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_WWDGEN) == 0U) - -#if defined(SPI2) -#define __HAL_RCC_SPI2_IS_CLK_DISABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_SPI2EN) == 0U) -#endif /* SPI2 */ - -#if defined(SPI3) -#define __HAL_RCC_SPI3_IS_CLK_DISABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_SPI3EN) == 0U) -#endif /* SPI3 */ - -#define __HAL_RCC_USART2_IS_CLK_DISABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_USART2EN) == 0U) - -#if defined(USART3) -#define __HAL_RCC_USART3_IS_CLK_DISABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_USART3EN) == 0U) -#endif /* USART3 */ - -#if defined(UART4) -#define __HAL_RCC_UART4_IS_CLK_DISABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_UART4EN) == 0U) -#endif /* UART4 */ - -#if defined(UART5) -#define __HAL_RCC_UART5_IS_CLK_DISABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_UART5EN) == 0U) -#endif /* UART5 */ - -#define __HAL_RCC_I2C1_IS_CLK_DISABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_I2C1EN) == 0U) - -#if defined(I2C2) -#define __HAL_RCC_I2C2_IS_CLK_DISABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_I2C2EN) == 0U) -#endif /* I2C2 */ - -#define __HAL_RCC_I2C3_IS_CLK_DISABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_I2C3EN) == 0U) - -#if defined(I2C4) -#define __HAL_RCC_I2C4_IS_CLK_DISABLED() (READ_BIT(RCC->APB1ENR2, RCC_APB1ENR2_I2C4EN) == 0U) -#endif /* I2C4 */ - -#if defined(CRS) -#define __HAL_RCC_CRS_IS_CLK_DISABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_CRSEN) == 0U) -#endif /* CRS */ - -#if defined(CAN1) -#define __HAL_RCC_CAN1_IS_CLK_DISABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_CAN1EN) == 0U) -#endif /* CAN1 */ - -#if defined(CAN2) -#define __HAL_RCC_CAN2_IS_CLK_DISABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_CAN2EN) == 0U) -#endif /* CAN2 */ - -#if defined(USB) -#define __HAL_RCC_USB_IS_CLK_DISABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_USBFSEN) == 0U) -#endif /* USB */ - -#define __HAL_RCC_PWR_IS_CLK_DISABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_PWREN) == 0U) - -#if defined(DAC1) -#define __HAL_RCC_DAC1_IS_CLK_DISABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_DAC1EN) == 0U) -#endif /* DAC1 */ - -#define __HAL_RCC_OPAMP_IS_CLK_DISABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_OPAMPEN) == 0U) - -#define __HAL_RCC_LPTIM1_IS_CLK_DISABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_LPTIM1EN) == 0U) - -#define __HAL_RCC_LPUART1_IS_CLK_DISABLED() (READ_BIT(RCC->APB1ENR2, RCC_APB1ENR2_LPUART1EN) == 0U) - -#if defined(SWPMI1) -#define __HAL_RCC_SWPMI1_IS_CLK_DISABLED() (READ_BIT(RCC->APB1ENR2, RCC_APB1ENR2_SWPMI1EN) == 0U) -#endif /* SWPMI1 */ - -#define __HAL_RCC_LPTIM2_IS_CLK_DISABLED() (READ_BIT(RCC->APB1ENR2, RCC_APB1ENR2_LPTIM2EN) == 0U) - -/** - * @} - */ - -/** @defgroup RCC_APB2_Clock_Enable_Disable_Status APB2 Peripheral Clock Enabled or Disabled Status - * @brief Check whether the APB2 peripheral clock is enabled or not. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ - -#define __HAL_RCC_SYSCFG_IS_CLK_ENABLED() (READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SYSCFGEN) != 0U) - -#define __HAL_RCC_FIREWALL_IS_CLK_ENABLED() (READ_BIT(RCC->APB2ENR, RCC_APB2ENR_FWEN) != 0U) - -#if defined(SDMMC1) && defined(RCC_APB2ENR_SDMMC1EN) -#define __HAL_RCC_SDMMC1_IS_CLK_ENABLED() (READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SDMMC1EN) != 0U) -#endif /* SDMMC1 && RCC_APB2ENR_SDMMC1EN */ - -#define __HAL_RCC_TIM1_IS_CLK_ENABLED() (READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM1EN) != 0U) - -#define __HAL_RCC_SPI1_IS_CLK_ENABLED() (READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI1EN) != 0U) - -#if defined(TIM8) -#define __HAL_RCC_TIM8_IS_CLK_ENABLED() (READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM8EN) != 0U) -#endif /* TIM8 */ - -#define __HAL_RCC_USART1_IS_CLK_ENABLED() (READ_BIT(RCC->APB2ENR, RCC_APB2ENR_USART1EN) != 0U) - -#define __HAL_RCC_TIM15_IS_CLK_ENABLED() (READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM15EN) != 0U) - -#define __HAL_RCC_TIM16_IS_CLK_ENABLED() (READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM16EN) != 0U) - -#if defined(TIM17) -#define __HAL_RCC_TIM17_IS_CLK_ENABLED() (READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM17EN) != 0U) -#endif /* TIM17 */ - -#if defined(SAI1) -#define __HAL_RCC_SAI1_IS_CLK_ENABLED() (READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SAI1EN) != 0U) -#endif /* SAI1 */ - -#if defined(SAI2) -#define __HAL_RCC_SAI2_IS_CLK_ENABLED() (READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SAI2EN) != 0U) -#endif /* SAI2 */ - -#if defined(DFSDM1_Filter0) -#define __HAL_RCC_DFSDM1_IS_CLK_ENABLED() (READ_BIT(RCC->APB2ENR, RCC_APB2ENR_DFSDM1EN) != 0U) -#endif /* DFSDM1_Filter0 */ - -#if defined(LTDC) -#define __HAL_RCC_LTDC_IS_CLK_ENABLED() (READ_BIT(RCC->APB2ENR, RCC_APB2ENR_LTDCEN) != 0U) -#endif /* LTDC */ - -#if defined(DSI) -#define __HAL_RCC_DSI_IS_CLK_ENABLED() (READ_BIT(RCC->APB2ENR, RCC_APB2ENR_DSIEN) != 0U) -#endif /* DSI */ - - -#define __HAL_RCC_SYSCFG_IS_CLK_DISABLED() (READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SYSCFGEN) == 0U) - -#if defined(SDMMC1) && defined(RCC_APB2ENR_SDMMC1EN) -#define __HAL_RCC_SDMMC1_IS_CLK_DISABLED() (READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SDMMC1EN) == 0U) -#endif /* SDMMC1 && RCC_APB2ENR_SDMMC1EN */ - -#define __HAL_RCC_TIM1_IS_CLK_DISABLED() (READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM1EN) == 0U) - -#define __HAL_RCC_SPI1_IS_CLK_DISABLED() (READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI1EN) == 0U) - -#if defined(TIM8) -#define __HAL_RCC_TIM8_IS_CLK_DISABLED() (READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM8EN) == 0U) -#endif /* TIM8 */ - -#define __HAL_RCC_USART1_IS_CLK_DISABLED() (READ_BIT(RCC->APB2ENR, RCC_APB2ENR_USART1EN) == 0U) - -#define __HAL_RCC_TIM15_IS_CLK_DISABLED() (READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM15EN) == 0U) - -#define __HAL_RCC_TIM16_IS_CLK_DISABLED() (READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM16EN) == 0U) - -#if defined(TIM17) -#define __HAL_RCC_TIM17_IS_CLK_DISABLED() (READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM17EN) == 0U) -#endif /* TIM17 */ - -#if defined(SAI1) -#define __HAL_RCC_SAI1_IS_CLK_DISABLED() (READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SAI1EN) == 0U) -#endif /* SAI1 */ - -#if defined(SAI2) -#define __HAL_RCC_SAI2_IS_CLK_DISABLED() (READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SAI2EN) == 0U) -#endif /* SAI2 */ - -#if defined(DFSDM1_Filter0) -#define __HAL_RCC_DFSDM1_IS_CLK_DISABLED() (READ_BIT(RCC->APB2ENR, RCC_APB2ENR_DFSDM1EN) == 0U) -#endif /* DFSDM1_Filter0 */ - -#if defined(LTDC) -#define __HAL_RCC_LTDC_IS_CLK_DISABLED() (READ_BIT(RCC->APB2ENR, RCC_APB2ENR_LTDCEN) == 0U) -#endif /* LTDC */ - -#if defined(DSI) -#define __HAL_RCC_DSI_IS_CLK_DISABLED() (READ_BIT(RCC->APB2ENR, RCC_APB2ENR_DSIEN) == 0U) -#endif /* DSI */ - -/** - * @} - */ - -/** @defgroup RCC_AHB1_Force_Release_Reset AHB1 Peripheral Force Release Reset - * @brief Force or release AHB1 peripheral reset. - * @{ - */ -#define __HAL_RCC_AHB1_FORCE_RESET() WRITE_REG(RCC->AHB1RSTR, 0xFFFFFFFFUL) - -#define __HAL_RCC_DMA1_FORCE_RESET() SET_BIT(RCC->AHB1RSTR, RCC_AHB1RSTR_DMA1RST) - -#define __HAL_RCC_DMA2_FORCE_RESET() SET_BIT(RCC->AHB1RSTR, RCC_AHB1RSTR_DMA2RST) - -#if defined(DMAMUX1) -#define __HAL_RCC_DMAMUX1_FORCE_RESET() SET_BIT(RCC->AHB1RSTR, RCC_AHB1RSTR_DMAMUX1RST) -#endif /* DMAMUX1 */ - -#define __HAL_RCC_FLASH_FORCE_RESET() SET_BIT(RCC->AHB1RSTR, RCC_AHB1RSTR_FLASHRST) - -#define __HAL_RCC_CRC_FORCE_RESET() SET_BIT(RCC->AHB1RSTR, RCC_AHB1RSTR_CRCRST) - -#define __HAL_RCC_TSC_FORCE_RESET() SET_BIT(RCC->AHB1RSTR, RCC_AHB1RSTR_TSCRST) - -#if defined(DMA2D) -#define __HAL_RCC_DMA2D_FORCE_RESET() SET_BIT(RCC->AHB1RSTR, RCC_AHB1RSTR_DMA2DRST) -#endif /* DMA2D */ - -#if defined(GFXMMU) -#define __HAL_RCC_GFXMMU_FORCE_RESET() SET_BIT(RCC->AHB1RSTR, RCC_AHB1RSTR_GFXMMURST) -#endif /* GFXMMU */ - - -#define __HAL_RCC_AHB1_RELEASE_RESET() WRITE_REG(RCC->AHB1RSTR, 0x00000000UL) - -#define __HAL_RCC_DMA1_RELEASE_RESET() CLEAR_BIT(RCC->AHB1RSTR, RCC_AHB1RSTR_DMA1RST) - -#define __HAL_RCC_DMA2_RELEASE_RESET() CLEAR_BIT(RCC->AHB1RSTR, RCC_AHB1RSTR_DMA2RST) - -#if defined(DMAMUX1) -#define __HAL_RCC_DMAMUX1_RELEASE_RESET() CLEAR_BIT(RCC->AHB1RSTR, RCC_AHB1RSTR_DMAMUX1RST) -#endif /* DMAMUX1 */ - -#define __HAL_RCC_FLASH_RELEASE_RESET() CLEAR_BIT(RCC->AHB1RSTR, RCC_AHB1RSTR_FLASHRST) - -#define __HAL_RCC_CRC_RELEASE_RESET() CLEAR_BIT(RCC->AHB1RSTR, RCC_AHB1RSTR_CRCRST) - -#define __HAL_RCC_TSC_RELEASE_RESET() CLEAR_BIT(RCC->AHB1RSTR, RCC_AHB1RSTR_TSCRST) - -#if defined(DMA2D) -#define __HAL_RCC_DMA2D_RELEASE_RESET() CLEAR_BIT(RCC->AHB1RSTR, RCC_AHB1RSTR_DMA2DRST) -#endif /* DMA2D */ - -#if defined(GFXMMU) -#define __HAL_RCC_GFXMMU_RELEASE_RESET() CLEAR_BIT(RCC->AHB1RSTR, RCC_AHB1RSTR_GFXMMURST) -#endif /* GFXMMU */ - -/** - * @} - */ - -/** @defgroup RCC_AHB2_Force_Release_Reset AHB2 Peripheral Force Release Reset - * @brief Force or release AHB2 peripheral reset. - * @{ - */ -#define __HAL_RCC_AHB2_FORCE_RESET() WRITE_REG(RCC->AHB2RSTR, 0xFFFFFFFFUL) - -#define __HAL_RCC_GPIOA_FORCE_RESET() SET_BIT(RCC->AHB2RSTR, RCC_AHB2RSTR_GPIOARST) - -#define __HAL_RCC_GPIOB_FORCE_RESET() SET_BIT(RCC->AHB2RSTR, RCC_AHB2RSTR_GPIOBRST) - -#define __HAL_RCC_GPIOC_FORCE_RESET() SET_BIT(RCC->AHB2RSTR, RCC_AHB2RSTR_GPIOCRST) - -#if defined(GPIOD) -#define __HAL_RCC_GPIOD_FORCE_RESET() SET_BIT(RCC->AHB2RSTR, RCC_AHB2RSTR_GPIODRST) -#endif /* GPIOD */ - -#if defined(GPIOE) -#define __HAL_RCC_GPIOE_FORCE_RESET() SET_BIT(RCC->AHB2RSTR, RCC_AHB2RSTR_GPIOERST) -#endif /* GPIOE */ - -#if defined(GPIOF) -#define __HAL_RCC_GPIOF_FORCE_RESET() SET_BIT(RCC->AHB2RSTR, RCC_AHB2RSTR_GPIOFRST) -#endif /* GPIOF */ - -#if defined(GPIOG) -#define __HAL_RCC_GPIOG_FORCE_RESET() SET_BIT(RCC->AHB2RSTR, RCC_AHB2RSTR_GPIOGRST) -#endif /* GPIOG */ - -#define __HAL_RCC_GPIOH_FORCE_RESET() SET_BIT(RCC->AHB2RSTR, RCC_AHB2RSTR_GPIOHRST) - -#if defined(GPIOI) -#define __HAL_RCC_GPIOI_FORCE_RESET() SET_BIT(RCC->AHB2RSTR, RCC_AHB2RSTR_GPIOIRST) -#endif /* GPIOI */ - -#if defined(USB_OTG_FS) -#define __HAL_RCC_USB_OTG_FS_FORCE_RESET() SET_BIT(RCC->AHB2RSTR, RCC_AHB2RSTR_OTGFSRST) -#endif /* USB_OTG_FS */ - -#define __HAL_RCC_ADC_FORCE_RESET() SET_BIT(RCC->AHB2RSTR, RCC_AHB2RSTR_ADCRST) - -#if defined(DCMI) -#define __HAL_RCC_DCMI_FORCE_RESET() SET_BIT(RCC->AHB2RSTR, RCC_AHB2RSTR_DCMIRST) -#endif /* DCMI */ - -#if defined(PKA) -#define __HAL_RCC_PKA_FORCE_RESET() SET_BIT(RCC->AHB2RSTR, RCC_AHB2RSTR_PKARST) -#endif /* PKA */ - -#if defined(AES) -#define __HAL_RCC_AES_FORCE_RESET() SET_BIT(RCC->AHB2RSTR, RCC_AHB2RSTR_AESRST) -#endif /* AES */ - -#if defined(HASH) -#define __HAL_RCC_HASH_FORCE_RESET() SET_BIT(RCC->AHB2RSTR, RCC_AHB2RSTR_HASHRST) -#endif /* HASH */ - -#define __HAL_RCC_RNG_FORCE_RESET() SET_BIT(RCC->AHB2RSTR, RCC_AHB2RSTR_RNGRST) - -#if defined(OCTOSPIM) -#define __HAL_RCC_OSPIM_FORCE_RESET() SET_BIT(RCC->AHB2RSTR, RCC_AHB2RSTR_OSPIMRST) -#endif /* OCTOSPIM */ - -#if defined(SDMMC1) && defined(RCC_AHB2RSTR_SDMMC1RST) -#define __HAL_RCC_SDMMC1_FORCE_RESET() SET_BIT(RCC->AHB2RSTR, RCC_AHB2RSTR_SDMMC1RST) -#endif /* SDMMC1 && RCC_AHB2RSTR_SDMMC1RST */ - -#if defined(SDMMC2) -#define __HAL_RCC_SDMMC2_FORCE_RESET() SET_BIT(RCC->AHB2RSTR, RCC_AHB2RSTR_SDMMC2RST) -#endif /* SDMMC2 */ - - -#define __HAL_RCC_AHB2_RELEASE_RESET() WRITE_REG(RCC->AHB2RSTR, 0x00000000UL) - -#define __HAL_RCC_GPIOA_RELEASE_RESET() CLEAR_BIT(RCC->AHB2RSTR, RCC_AHB2RSTR_GPIOARST) - -#define __HAL_RCC_GPIOB_RELEASE_RESET() CLEAR_BIT(RCC->AHB2RSTR, RCC_AHB2RSTR_GPIOBRST) - -#define __HAL_RCC_GPIOC_RELEASE_RESET() CLEAR_BIT(RCC->AHB2RSTR, RCC_AHB2RSTR_GPIOCRST) - -#if defined(GPIOD) -#define __HAL_RCC_GPIOD_RELEASE_RESET() CLEAR_BIT(RCC->AHB2RSTR, RCC_AHB2RSTR_GPIODRST) -#endif /* GPIOD */ - -#if defined(GPIOE) -#define __HAL_RCC_GPIOE_RELEASE_RESET() CLEAR_BIT(RCC->AHB2RSTR, RCC_AHB2RSTR_GPIOERST) -#endif /* GPIOE */ - -#if defined(GPIOF) -#define __HAL_RCC_GPIOF_RELEASE_RESET() CLEAR_BIT(RCC->AHB2RSTR, RCC_AHB2RSTR_GPIOFRST) -#endif /* GPIOF */ - -#if defined(GPIOG) -#define __HAL_RCC_GPIOG_RELEASE_RESET() CLEAR_BIT(RCC->AHB2RSTR, RCC_AHB2RSTR_GPIOGRST) -#endif /* GPIOG */ - -#define __HAL_RCC_GPIOH_RELEASE_RESET() CLEAR_BIT(RCC->AHB2RSTR, RCC_AHB2RSTR_GPIOHRST) - -#if defined(GPIOI) -#define __HAL_RCC_GPIOI_RELEASE_RESET() CLEAR_BIT(RCC->AHB2RSTR, RCC_AHB2RSTR_GPIOIRST) -#endif /* GPIOI */ - -#if defined(USB_OTG_FS) -#define __HAL_RCC_USB_OTG_FS_RELEASE_RESET() CLEAR_BIT(RCC->AHB2RSTR, RCC_AHB2RSTR_OTGFSRST) -#endif /* USB_OTG_FS */ - -#define __HAL_RCC_ADC_RELEASE_RESET() CLEAR_BIT(RCC->AHB2RSTR, RCC_AHB2RSTR_ADCRST) - -#if defined(DCMI) -#define __HAL_RCC_DCMI_RELEASE_RESET() CLEAR_BIT(RCC->AHB2RSTR, RCC_AHB2RSTR_DCMIRST) -#endif /* DCMI */ - -#if defined(PKA) -#define __HAL_RCC_PKA_RELEASE_RESET() CLEAR_BIT(RCC->AHB2RSTR, RCC_AHB2RSTR_PKARST) -#endif /* PKA */ - -#if defined(AES) -#define __HAL_RCC_AES_RELEASE_RESET() CLEAR_BIT(RCC->AHB2RSTR, RCC_AHB2RSTR_AESRST) -#endif /* AES */ - -#if defined(HASH) -#define __HAL_RCC_HASH_RELEASE_RESET() CLEAR_BIT(RCC->AHB2RSTR, RCC_AHB2RSTR_HASHRST) -#endif /* HASH */ - -#define __HAL_RCC_RNG_RELEASE_RESET() CLEAR_BIT(RCC->AHB2RSTR, RCC_AHB2RSTR_RNGRST) - -#if defined(OCTOSPIM) -#define __HAL_RCC_OSPIM_RELEASE_RESET() CLEAR_BIT(RCC->AHB2RSTR, RCC_AHB2RSTR_OSPIMRST) -#endif /* OCTOSPIM */ - -#if defined(SDMMC1) && defined(RCC_AHB2RSTR_SDMMC1RST) -#define __HAL_RCC_SDMMC1_RELEASE_RESET() CLEAR_BIT(RCC->AHB2RSTR, RCC_AHB2RSTR_SDMMC1RST) -#endif /* SDMMC1 && RCC_AHB2RSTR_SDMMC1RST */ - -#if defined(SDMMC2) -#define __HAL_RCC_SDMMC2_RELEASE_RESET() CLEAR_BIT(RCC->AHB2RSTR, RCC_AHB2RSTR_SDMMC2RST) -#endif /* SDMMC2 */ - -/** - * @} - */ - -/** @defgroup RCC_AHB3_Force_Release_Reset AHB3 Peripheral Force Release Reset - * @brief Force or release AHB3 peripheral reset. - * @{ - */ -#define __HAL_RCC_AHB3_FORCE_RESET() WRITE_REG(RCC->AHB3RSTR, 0xFFFFFFFFUL) - -#if defined(FMC_BANK1) -#define __HAL_RCC_FMC_FORCE_RESET() SET_BIT(RCC->AHB3RSTR, RCC_AHB3RSTR_FMCRST) -#endif /* FMC_BANK1 */ - -#if defined(QUADSPI) -#define __HAL_RCC_QSPI_FORCE_RESET() SET_BIT(RCC->AHB3RSTR, RCC_AHB3RSTR_QSPIRST) -#endif /* QUADSPI */ - -#if defined(OCTOSPI1) -#define __HAL_RCC_OSPI1_FORCE_RESET() SET_BIT(RCC->AHB3RSTR, RCC_AHB3RSTR_OSPI1RST) -#endif /* OCTOSPI1 */ - -#if defined(OCTOSPI2) -#define __HAL_RCC_OSPI2_FORCE_RESET() SET_BIT(RCC->AHB3RSTR, RCC_AHB3RSTR_OSPI2RST) -#endif /* OCTOSPI2 */ - -#define __HAL_RCC_AHB3_RELEASE_RESET() WRITE_REG(RCC->AHB3RSTR, 0x00000000UL) - -#if defined(FMC_BANK1) -#define __HAL_RCC_FMC_RELEASE_RESET() CLEAR_BIT(RCC->AHB3RSTR, RCC_AHB3RSTR_FMCRST) -#endif /* FMC_BANK1 */ - -#if defined(QUADSPI) -#define __HAL_RCC_QSPI_RELEASE_RESET() CLEAR_BIT(RCC->AHB3RSTR, RCC_AHB3RSTR_QSPIRST) -#endif /* QUADSPI */ - -#if defined(OCTOSPI1) -#define __HAL_RCC_OSPI1_RELEASE_RESET() CLEAR_BIT(RCC->AHB3RSTR, RCC_AHB3RSTR_OSPI1RST) -#endif /* OCTOSPI1 */ - -#if defined(OCTOSPI2) -#define __HAL_RCC_OSPI2_RELEASE_RESET() CLEAR_BIT(RCC->AHB3RSTR, RCC_AHB3RSTR_OSPI2RST) -#endif /* OCTOSPI2 */ - -/** - * @} - */ - -/** @defgroup RCC_APB1_Force_Release_Reset APB1 Peripheral Force Release Reset - * @brief Force or release APB1 peripheral reset. - * @{ - */ -#define __HAL_RCC_APB1_FORCE_RESET() do { \ - WRITE_REG(RCC->APB1RSTR1, 0xFFFFFFFFUL); \ - WRITE_REG(RCC->APB1RSTR2, 0xFFFFFFFFUL); \ - } while(0) - -#define __HAL_RCC_TIM2_FORCE_RESET() SET_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_TIM2RST) - -#if defined(TIM3) -#define __HAL_RCC_TIM3_FORCE_RESET() SET_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_TIM3RST) -#endif /* TIM3 */ - -#if defined(TIM4) -#define __HAL_RCC_TIM4_FORCE_RESET() SET_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_TIM4RST) -#endif /* TIM4 */ - -#if defined(TIM5) -#define __HAL_RCC_TIM5_FORCE_RESET() SET_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_TIM5RST) -#endif /* TIM5 */ - -#define __HAL_RCC_TIM6_FORCE_RESET() SET_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_TIM6RST) - -#if defined(TIM7) -#define __HAL_RCC_TIM7_FORCE_RESET() SET_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_TIM7RST) -#endif /* TIM7 */ - -#if defined(LCD) -#define __HAL_RCC_LCD_FORCE_RESET() SET_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_LCDRST) -#endif /* LCD */ - -#if defined(SPI2) -#define __HAL_RCC_SPI2_FORCE_RESET() SET_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_SPI2RST) -#endif /* SPI2 */ - -#if defined(SPI3) -#define __HAL_RCC_SPI3_FORCE_RESET() SET_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_SPI3RST) -#endif /* SPI3 */ - -#define __HAL_RCC_USART2_FORCE_RESET() SET_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_USART2RST) - -#if defined(USART3) -#define __HAL_RCC_USART3_FORCE_RESET() SET_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_USART3RST) -#endif /* USART3 */ - -#if defined(UART4) -#define __HAL_RCC_UART4_FORCE_RESET() SET_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_UART4RST) -#endif /* UART4 */ - -#if defined(UART5) -#define __HAL_RCC_UART5_FORCE_RESET() SET_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_UART5RST) -#endif /* UART5 */ - -#define __HAL_RCC_I2C1_FORCE_RESET() SET_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_I2C1RST) - -#if defined(I2C2) -#define __HAL_RCC_I2C2_FORCE_RESET() SET_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_I2C2RST) -#endif /* I2C2 */ - -#define __HAL_RCC_I2C3_FORCE_RESET() SET_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_I2C3RST) - -#if defined(I2C4) -#define __HAL_RCC_I2C4_FORCE_RESET() SET_BIT(RCC->APB1RSTR2, RCC_APB1RSTR2_I2C4RST) -#endif /* I2C4 */ - -#if defined(CRS) -#define __HAL_RCC_CRS_FORCE_RESET() SET_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_CRSRST) -#endif /* CRS */ - -#if defined(CAN1) -#define __HAL_RCC_CAN1_FORCE_RESET() SET_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_CAN1RST) -#endif /* CAN1 */ - -#if defined(CAN2) -#define __HAL_RCC_CAN2_FORCE_RESET() SET_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_CAN2RST) -#endif /* CAN2 */ - -#if defined(USB) -#define __HAL_RCC_USB_FORCE_RESET() SET_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_USBFSRST) -#endif /* USB */ - -#define __HAL_RCC_PWR_FORCE_RESET() SET_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_PWRRST) - -#if defined(DAC1) -#define __HAL_RCC_DAC1_FORCE_RESET() SET_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_DAC1RST) -#endif /* DAC1 */ - -#define __HAL_RCC_OPAMP_FORCE_RESET() SET_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_OPAMPRST) - -#define __HAL_RCC_LPTIM1_FORCE_RESET() SET_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_LPTIM1RST) - -#define __HAL_RCC_LPUART1_FORCE_RESET() SET_BIT(RCC->APB1RSTR2, RCC_APB1RSTR2_LPUART1RST) - -#if defined(SWPMI1) -#define __HAL_RCC_SWPMI1_FORCE_RESET() SET_BIT(RCC->APB1RSTR2, RCC_APB1RSTR2_SWPMI1RST) -#endif /* SWPMI1 */ - -#define __HAL_RCC_LPTIM2_FORCE_RESET() SET_BIT(RCC->APB1RSTR2, RCC_APB1RSTR2_LPTIM2RST) - - -#define __HAL_RCC_APB1_RELEASE_RESET() do { \ - WRITE_REG(RCC->APB1RSTR1, 0x00000000UL); \ - WRITE_REG(RCC->APB1RSTR2, 0x00000000UL); \ - } while(0) - -#define __HAL_RCC_TIM2_RELEASE_RESET() CLEAR_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_TIM2RST) - -#if defined(TIM3) -#define __HAL_RCC_TIM3_RELEASE_RESET() CLEAR_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_TIM3RST) -#endif /* TIM3 */ - -#if defined(TIM4) -#define __HAL_RCC_TIM4_RELEASE_RESET() CLEAR_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_TIM4RST) -#endif /* TIM4 */ - -#if defined(TIM5) -#define __HAL_RCC_TIM5_RELEASE_RESET() CLEAR_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_TIM5RST) -#endif /* TIM5 */ - -#define __HAL_RCC_TIM6_RELEASE_RESET() CLEAR_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_TIM6RST) - -#if defined(TIM7) -#define __HAL_RCC_TIM7_RELEASE_RESET() CLEAR_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_TIM7RST) -#endif /* TIM7 */ - -#if defined(LCD) -#define __HAL_RCC_LCD_RELEASE_RESET() CLEAR_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_LCDRST) -#endif /* LCD */ - -#if defined(SPI2) -#define __HAL_RCC_SPI2_RELEASE_RESET() CLEAR_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_SPI2RST) -#endif /* SPI2 */ - -#if defined(SPI3) -#define __HAL_RCC_SPI3_RELEASE_RESET() CLEAR_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_SPI3RST) -#endif /* SPI3 */ - -#define __HAL_RCC_USART2_RELEASE_RESET() CLEAR_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_USART2RST) - -#if defined(USART3) -#define __HAL_RCC_USART3_RELEASE_RESET() CLEAR_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_USART3RST) -#endif /* USART3 */ - -#if defined(UART4) -#define __HAL_RCC_UART4_RELEASE_RESET() CLEAR_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_UART4RST) -#endif /* UART4 */ - -#if defined(UART5) -#define __HAL_RCC_UART5_RELEASE_RESET() CLEAR_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_UART5RST) -#endif /* UART5 */ - -#define __HAL_RCC_I2C1_RELEASE_RESET() CLEAR_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_I2C1RST) - -#if defined(I2C2) -#define __HAL_RCC_I2C2_RELEASE_RESET() CLEAR_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_I2C2RST) -#endif /* I2C2 */ - -#define __HAL_RCC_I2C3_RELEASE_RESET() CLEAR_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_I2C3RST) - -#if defined(I2C4) -#define __HAL_RCC_I2C4_RELEASE_RESET() CLEAR_BIT(RCC->APB1RSTR2, RCC_APB1RSTR2_I2C4RST) -#endif /* I2C4 */ - -#if defined(CRS) -#define __HAL_RCC_CRS_RELEASE_RESET() CLEAR_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_CRSRST) -#endif /* CRS */ - -#if defined(CAN1) -#define __HAL_RCC_CAN1_RELEASE_RESET() CLEAR_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_CAN1RST) -#endif /* CAN1 */ - -#if defined(CAN2) -#define __HAL_RCC_CAN2_RELEASE_RESET() CLEAR_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_CAN2RST) -#endif /* CAN2 */ - -#if defined(USB) -#define __HAL_RCC_USB_RELEASE_RESET() CLEAR_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_USBFSRST) -#endif /* USB */ - -#define __HAL_RCC_PWR_RELEASE_RESET() CLEAR_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_PWRRST) - -#if defined(DAC1) -#define __HAL_RCC_DAC1_RELEASE_RESET() CLEAR_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_DAC1RST) -#endif /* DAC1 */ - -#define __HAL_RCC_OPAMP_RELEASE_RESET() CLEAR_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_OPAMPRST) - -#define __HAL_RCC_LPTIM1_RELEASE_RESET() CLEAR_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_LPTIM1RST) - -#define __HAL_RCC_LPUART1_RELEASE_RESET() CLEAR_BIT(RCC->APB1RSTR2, RCC_APB1RSTR2_LPUART1RST) - -#if defined(SWPMI1) -#define __HAL_RCC_SWPMI1_RELEASE_RESET() CLEAR_BIT(RCC->APB1RSTR2, RCC_APB1RSTR2_SWPMI1RST) -#endif /* SWPMI1 */ - -#define __HAL_RCC_LPTIM2_RELEASE_RESET() CLEAR_BIT(RCC->APB1RSTR2, RCC_APB1RSTR2_LPTIM2RST) - -/** - * @} - */ - -/** @defgroup RCC_APB2_Force_Release_Reset APB2 Peripheral Force Release Reset - * @brief Force or release APB2 peripheral reset. - * @{ - */ -#define __HAL_RCC_APB2_FORCE_RESET() WRITE_REG(RCC->APB2RSTR, 0xFFFFFFFFUL) - -#define __HAL_RCC_SYSCFG_FORCE_RESET() SET_BIT(RCC->APB2RSTR, RCC_APB2RSTR_SYSCFGRST) - -#if defined(SDMMC1) && defined(RCC_APB2RSTR_SDMMC1RST) -#define __HAL_RCC_SDMMC1_FORCE_RESET() SET_BIT(RCC->APB2RSTR, RCC_APB2RSTR_SDMMC1RST) -#endif /* SDMMC1 && RCC_APB2RSTR_SDMMC1RST */ - -#define __HAL_RCC_TIM1_FORCE_RESET() SET_BIT(RCC->APB2RSTR, RCC_APB2RSTR_TIM1RST) - -#define __HAL_RCC_SPI1_FORCE_RESET() SET_BIT(RCC->APB2RSTR, RCC_APB2RSTR_SPI1RST) - -#if defined(TIM8) -#define __HAL_RCC_TIM8_FORCE_RESET() SET_BIT(RCC->APB2RSTR, RCC_APB2RSTR_TIM8RST) -#endif /* TIM8 */ - -#define __HAL_RCC_USART1_FORCE_RESET() SET_BIT(RCC->APB2RSTR, RCC_APB2RSTR_USART1RST) - -#define __HAL_RCC_TIM15_FORCE_RESET() SET_BIT(RCC->APB2RSTR, RCC_APB2RSTR_TIM15RST) - -#define __HAL_RCC_TIM16_FORCE_RESET() SET_BIT(RCC->APB2RSTR, RCC_APB2RSTR_TIM16RST) - -#if defined(TIM17) -#define __HAL_RCC_TIM17_FORCE_RESET() SET_BIT(RCC->APB2RSTR, RCC_APB2RSTR_TIM17RST) -#endif /* TIM17 */ - -#if defined(SAI1) -#define __HAL_RCC_SAI1_FORCE_RESET() SET_BIT(RCC->APB2RSTR, RCC_APB2RSTR_SAI1RST) -#endif /* SAI1 */ - -#if defined(SAI2) -#define __HAL_RCC_SAI2_FORCE_RESET() SET_BIT(RCC->APB2RSTR, RCC_APB2RSTR_SAI2RST) -#endif /* SAI2 */ - -#if defined(DFSDM1_Filter0) -#define __HAL_RCC_DFSDM1_FORCE_RESET() SET_BIT(RCC->APB2RSTR, RCC_APB2RSTR_DFSDM1RST) -#endif /* DFSDM1_Filter0 */ - -#if defined(LTDC) -#define __HAL_RCC_LTDC_FORCE_RESET() SET_BIT(RCC->APB2RSTR, RCC_APB2RSTR_LTDCRST) -#endif /* LTDC */ - -#if defined(DSI) -#define __HAL_RCC_DSI_FORCE_RESET() SET_BIT(RCC->APB2RSTR, RCC_APB2RSTR_DSIRST) -#endif /* DSI */ - - -#define __HAL_RCC_APB2_RELEASE_RESET() WRITE_REG(RCC->APB2RSTR, 0x00000000UL) - -#define __HAL_RCC_SYSCFG_RELEASE_RESET() CLEAR_BIT(RCC->APB2RSTR, RCC_APB2RSTR_SYSCFGRST) - -#if defined(SDMMC1) && defined(RCC_APB2RSTR_SDMMC1RST) -#define __HAL_RCC_SDMMC1_RELEASE_RESET() CLEAR_BIT(RCC->APB2RSTR, RCC_APB2RSTR_SDMMC1RST) -#endif /* SDMMC1 && RCC_APB2RSTR_SDMMC1RST */ - -#define __HAL_RCC_TIM1_RELEASE_RESET() CLEAR_BIT(RCC->APB2RSTR, RCC_APB2RSTR_TIM1RST) - -#define __HAL_RCC_SPI1_RELEASE_RESET() CLEAR_BIT(RCC->APB2RSTR, RCC_APB2RSTR_SPI1RST) - -#if defined(TIM8) -#define __HAL_RCC_TIM8_RELEASE_RESET() CLEAR_BIT(RCC->APB2RSTR, RCC_APB2RSTR_TIM8RST) -#endif /* TIM8 */ - -#define __HAL_RCC_USART1_RELEASE_RESET() CLEAR_BIT(RCC->APB2RSTR, RCC_APB2RSTR_USART1RST) - -#define __HAL_RCC_TIM15_RELEASE_RESET() CLEAR_BIT(RCC->APB2RSTR, RCC_APB2RSTR_TIM15RST) - -#define __HAL_RCC_TIM16_RELEASE_RESET() CLEAR_BIT(RCC->APB2RSTR, RCC_APB2RSTR_TIM16RST) - -#if defined(TIM17) -#define __HAL_RCC_TIM17_RELEASE_RESET() CLEAR_BIT(RCC->APB2RSTR, RCC_APB2RSTR_TIM17RST) -#endif /* TIM17 */ - -#if defined(SAI1) -#define __HAL_RCC_SAI1_RELEASE_RESET() CLEAR_BIT(RCC->APB2RSTR, RCC_APB2RSTR_SAI1RST) -#endif /* SAI1 */ - -#if defined(SAI2) -#define __HAL_RCC_SAI2_RELEASE_RESET() CLEAR_BIT(RCC->APB2RSTR, RCC_APB2RSTR_SAI2RST) -#endif /* SAI2 */ - -#if defined(DFSDM1_Filter0) -#define __HAL_RCC_DFSDM1_RELEASE_RESET() CLEAR_BIT(RCC->APB2RSTR, RCC_APB2RSTR_DFSDM1RST) -#endif /* DFSDM1_Filter0 */ - -#if defined(LTDC) -#define __HAL_RCC_LTDC_RELEASE_RESET() CLEAR_BIT(RCC->APB2RSTR, RCC_APB2RSTR_LTDCRST) -#endif /* LTDC */ - -#if defined(DSI) -#define __HAL_RCC_DSI_RELEASE_RESET() CLEAR_BIT(RCC->APB2RSTR, RCC_APB2RSTR_DSIRST) -#endif /* DSI */ - -/** - * @} - */ - -/** @defgroup RCC_AHB1_Clock_Sleep_Enable_Disable AHB1 Peripheral Clock Sleep Enable Disable - * @brief Enable or disable the AHB1 peripheral clock during Low Power (Sleep) mode. - * @note Peripheral clock gating in SLEEP mode can be used to further reduce - * power consumption. - * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. - * @note By default, all peripheral clocks are enabled during SLEEP mode. - * @{ - */ - -#define __HAL_RCC_DMA1_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHB1SMENR, RCC_AHB1SMENR_DMA1SMEN) - -#define __HAL_RCC_DMA2_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHB1SMENR, RCC_AHB1SMENR_DMA2SMEN) - -#if defined(DMAMUX1) -#define __HAL_RCC_DMAMUX1_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHB1SMENR, RCC_AHB1SMENR_DMAMUX1SMEN) -#endif /* DMAMUX1 */ - -#define __HAL_RCC_FLASH_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHB1SMENR, RCC_AHB1SMENR_FLASHSMEN) - -#define __HAL_RCC_SRAM1_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHB1SMENR, RCC_AHB1SMENR_SRAM1SMEN) - -#define __HAL_RCC_CRC_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHB1SMENR, RCC_AHB1SMENR_CRCSMEN) - -#define __HAL_RCC_TSC_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHB1SMENR, RCC_AHB1SMENR_TSCSMEN) - -#if defined(DMA2D) -#define __HAL_RCC_DMA2D_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHB1SMENR, RCC_AHB1SMENR_DMA2DSMEN) -#endif /* DMA2D */ - -#if defined(GFXMMU) -#define __HAL_RCC_GFXMMU_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHB1SMENR, RCC_AHB1SMENR_GFXMMUSMEN) -#endif /* GFXMMU */ - - -#define __HAL_RCC_DMA1_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHB1SMENR, RCC_AHB1SMENR_DMA1SMEN) - -#define __HAL_RCC_DMA2_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHB1SMENR, RCC_AHB1SMENR_DMA2SMEN) - -#if defined(DMAMUX1) -#define __HAL_RCC_DMAMUX1_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHB1SMENR, RCC_AHB1SMENR_DMAMUX1SMEN) -#endif /* DMAMUX1 */ - -#define __HAL_RCC_FLASH_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHB1SMENR, RCC_AHB1SMENR_FLASHSMEN) - -#define __HAL_RCC_SRAM1_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHB1SMENR, RCC_AHB1SMENR_SRAM1SMEN) - -#define __HAL_RCC_CRC_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHB1SMENR, RCC_AHB1SMENR_CRCSMEN) - -#define __HAL_RCC_TSC_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHB1SMENR, RCC_AHB1SMENR_TSCSMEN) - -#if defined(DMA2D) -#define __HAL_RCC_DMA2D_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHB1SMENR, RCC_AHB1SMENR_DMA2DSMEN) -#endif /* DMA2D */ - -#if defined(GFXMMU) -#define __HAL_RCC_GFXMMU_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHB1SMENR, RCC_AHB1SMENR_GFXMMUSMEN) -#endif /* GFXMMU */ - -/** - * @} - */ - -/** @defgroup RCC_AHB2_Clock_Sleep_Enable_Disable AHB2 Peripheral Clock Sleep Enable Disable - * @brief Enable or disable the AHB2 peripheral clock during Low Power (Sleep) mode. - * @note Peripheral clock gating in SLEEP mode can be used to further reduce - * power consumption. - * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. - * @note By default, all peripheral clocks are enabled during SLEEP mode. - * @{ - */ - -#define __HAL_RCC_GPIOA_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_GPIOASMEN) - -#define __HAL_RCC_GPIOB_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_GPIOBSMEN) - -#define __HAL_RCC_GPIOC_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_GPIOCSMEN) - -#if defined(GPIOD) -#define __HAL_RCC_GPIOD_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_GPIODSMEN) -#endif /* GPIOD */ - -#if defined(GPIOE) -#define __HAL_RCC_GPIOE_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_GPIOESMEN) -#endif /* GPIOE */ - -#if defined(GPIOF) -#define __HAL_RCC_GPIOF_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_GPIOFSMEN) -#endif /* GPIOF */ - -#if defined(GPIOG) -#define __HAL_RCC_GPIOG_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_GPIOGSMEN) -#endif /* GPIOG */ - -#define __HAL_RCC_GPIOH_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_GPIOHSMEN) - -#if defined(GPIOI) -#define __HAL_RCC_GPIOI_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_GPIOISMEN) -#endif /* GPIOI */ - -#define __HAL_RCC_SRAM2_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_SRAM2SMEN) - -#if defined(SRAM3) -#define __HAL_RCC_SRAM3_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_SRAM3SMEN) -#endif /* SRAM3 */ - -#if defined(USB_OTG_FS) -#define __HAL_RCC_USB_OTG_FS_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_OTGFSSMEN) -#endif /* USB_OTG_FS */ - -#define __HAL_RCC_ADC_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_ADCSMEN) - -#if defined(DCMI) -#define __HAL_RCC_DCMI_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_DCMISMEN) -#endif /* DCMI */ - -#if defined(PKA) -#define __HAL_RCC_PKA_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_PKASMEN) -#endif /* PKA */ - -#if defined(AES) -#define __HAL_RCC_AES_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_AESSMEN) -#endif /* AES */ - -#if defined(HASH) -#define __HAL_RCC_HASH_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_HASHSMEN) -#endif /* HASH */ - -#define __HAL_RCC_RNG_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_RNGSMEN) - -#if defined(OCTOSPIM) -#define __HAL_RCC_OSPIM_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_OSPIMSMEN) -#endif /* OCTOSPIM */ - -#if defined(SDMMC1) && defined(RCC_AHB2SMENR_SDMMC1SMEN) -#define __HAL_RCC_SDMMC1_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_SDMMC1SMEN) -#endif /* SDMMC1 && RCC_AHB2SMENR_SDMMC1SMEN */ - -#if defined(SDMMC2) -#define __HAL_RCC_SDMMC2_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_SDMMC2SMEN) -#endif /* SDMMC2 */ - - -#define __HAL_RCC_GPIOA_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_GPIOASMEN) - -#define __HAL_RCC_GPIOB_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_GPIOBSMEN) - -#define __HAL_RCC_GPIOC_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_GPIOCSMEN) - -#if defined(GPIOD) -#define __HAL_RCC_GPIOD_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_GPIODSMEN) -#endif /* GPIOD */ - -#if defined(GPIOE) -#define __HAL_RCC_GPIOE_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_GPIOESMEN) -#endif /* GPIOE */ - -#if defined(GPIOF) -#define __HAL_RCC_GPIOF_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_GPIOFSMEN) -#endif /* GPIOF */ - -#if defined(GPIOG) -#define __HAL_RCC_GPIOG_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_GPIOGSMEN) -#endif /* GPIOG */ - -#define __HAL_RCC_GPIOH_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_GPIOHSMEN) - -#if defined(GPIOI) -#define __HAL_RCC_GPIOI_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_GPIOISMEN) -#endif /* GPIOI */ - -#define __HAL_RCC_SRAM2_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_SRAM2SMEN) - -#if defined(SRAM3) -#define __HAL_RCC_SRAM3_IS_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_SRAM3SMEN) -#endif /* SRAM3 */ - -#if defined(USB_OTG_FS) -#define __HAL_RCC_USB_OTG_FS_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_OTGFSSMEN) -#endif /* USB_OTG_FS */ - -#define __HAL_RCC_ADC_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_ADCSMEN) - -#if defined(DCMI) -#define __HAL_RCC_DCMI_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_DCMISMEN) -#endif /* DCMI */ - -#if defined(PKA) -#define __HAL_RCC_PKA_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_PKASMEN) -#endif /* PKA */ - -#if defined(AES) -#define __HAL_RCC_AES_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_AESSMEN) -#endif /* AES */ - -#if defined(HASH) -#define __HAL_RCC_HASH_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_HASHSMEN) -#endif /* HASH */ - -#define __HAL_RCC_RNG_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_RNGSMEN) - -#if defined(OCTOSPIM) -#define __HAL_RCC_OSPIM_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_OSPIMSMEN) -#endif /* OCTOSPIM */ - -#if defined(SDMMC1) && defined(RCC_AHB2SMENR_SDMMC1SMEN) -#define __HAL_RCC_SDMMC1_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_SDMMC1SMEN) -#endif /* SDMMC1 && RCC_AHB2SMENR_SDMMC1SMEN */ - -#if defined(SDMMC2) -#define __HAL_RCC_SDMMC2_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_SDMMC2SMEN) -#endif /* SDMMC2 */ - -/** - * @} - */ - -/** @defgroup RCC_AHB3_Clock_Sleep_Enable_Disable AHB3 Peripheral Clock Sleep Enable Disable - * @brief Enable or disable the AHB3 peripheral clock during Low Power (Sleep) mode. - * @note Peripheral clock gating in SLEEP mode can be used to further reduce - * power consumption. - * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. - * @note By default, all peripheral clocks are enabled during SLEEP mode. - * @{ - */ - -#if defined(QUADSPI) -#define __HAL_RCC_QSPI_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHB3SMENR, RCC_AHB3SMENR_QSPISMEN) -#endif /* QUADSPI */ - -#if defined(OCTOSPI1) -#define __HAL_RCC_OSPI1_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHB3SMENR, RCC_AHB3SMENR_OSPI1SMEN) -#endif /* OCTOSPI1 */ - -#if defined(OCTOSPI2) -#define __HAL_RCC_OSPI2_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHB3SMENR, RCC_AHB3SMENR_OSPI2SMEN) -#endif /* OCTOSPI2 */ - -#if defined(FMC_BANK1) -#define __HAL_RCC_FMC_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHB3SMENR, RCC_AHB3SMENR_FMCSMEN) -#endif /* FMC_BANK1 */ - -#if defined(QUADSPI) -#define __HAL_RCC_QSPI_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHB3SMENR, RCC_AHB3SMENR_QSPISMEN) -#endif /* QUADSPI */ - -#if defined(OCTOSPI1) -#define __HAL_RCC_OSPI1_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHB3SMENR, RCC_AHB3SMENR_OSPI1SMEN) -#endif /* OCTOSPI1 */ - -#if defined(OCTOSPI2) -#define __HAL_RCC_OSPI2_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHB3SMENR, RCC_AHB3SMENR_OSPI2SMEN) -#endif /* OCTOSPI2 */ - -#if defined(FMC_BANK1) -#define __HAL_RCC_FMC_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHB3SMENR, RCC_AHB3SMENR_FMCSMEN) -#endif /* FMC_BANK1 */ - -/** - * @} - */ - -/** @defgroup RCC_APB1_Clock_Sleep_Enable_Disable APB1 Peripheral Clock Sleep Enable Disable - * @brief Enable or disable the APB1 peripheral clock during Low Power (Sleep) mode. - * @note Peripheral clock gating in SLEEP mode can be used to further reduce - * power consumption. - * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. - * @note By default, all peripheral clocks are enabled during SLEEP mode. - * @{ - */ - -#define __HAL_RCC_TIM2_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_TIM2SMEN) - -#if defined(TIM3) -#define __HAL_RCC_TIM3_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_TIM3SMEN) -#endif /* TIM3 */ - -#if defined(TIM4) -#define __HAL_RCC_TIM4_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_TIM4SMEN) -#endif /* TIM4 */ - -#if defined(TIM5) -#define __HAL_RCC_TIM5_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_TIM5SMEN) -#endif /* TIM5 */ - -#define __HAL_RCC_TIM6_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_TIM6SMEN) - -#if defined(TIM7) -#define __HAL_RCC_TIM7_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_TIM7SMEN) -#endif /* TIM7 */ - -#if defined(LCD) -#define __HAL_RCC_LCD_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_LCDSMEN) -#endif /* LCD */ - -#if defined(RCC_APB1SMENR1_RTCAPBSMEN) -#define __HAL_RCC_RTCAPB_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_RTCAPBSMEN) -#endif /* RCC_APB1SMENR1_RTCAPBSMEN */ - -#define __HAL_RCC_WWDG_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_WWDGSMEN) - -#if defined(SPI2) -#define __HAL_RCC_SPI2_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_SPI2SMEN) -#endif /* SPI2 */ - -#if defined(SPI3) -#define __HAL_RCC_SPI3_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_SPI3SMEN) -#endif /* SPI3 */ - -#define __HAL_RCC_USART2_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_USART2SMEN) - -#if defined(USART3) -#define __HAL_RCC_USART3_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_USART3SMEN) -#endif /* USART3 */ - -#if defined(UART4) -#define __HAL_RCC_UART4_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_UART4SMEN) -#endif /* UART4 */ - -#if defined(UART5) -#define __HAL_RCC_UART5_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_UART5SMEN) -#endif /* UART5 */ - -#define __HAL_RCC_I2C1_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_I2C1SMEN) - -#if defined(I2C2) -#define __HAL_RCC_I2C2_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_I2C2SMEN) -#endif /* I2C2 */ - -#define __HAL_RCC_I2C3_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_I2C3SMEN) - -#if defined(I2C4) -#define __HAL_RCC_I2C4_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB1SMENR2, RCC_APB1SMENR2_I2C4SMEN) -#endif /* I2C4 */ - -#if defined(CRS) -#define __HAL_RCC_CRS_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_CRSSMEN) -#endif /* CRS */ - -#if defined(CAN1) -#define __HAL_RCC_CAN1_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_CAN1SMEN) -#endif /* CAN1 */ - -#if defined(CAN2) -#define __HAL_RCC_CAN2_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_CAN2SMEN) -#endif /* CAN2 */ - -#if defined(USB) -#define __HAL_RCC_USB_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_USBFSSMEN) -#endif /* USB */ - -#define __HAL_RCC_PWR_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_PWRSMEN) - -#if defined(DAC1) -#define __HAL_RCC_DAC1_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_DAC1SMEN) -#endif /* DAC1 */ - -#define __HAL_RCC_OPAMP_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_OPAMPSMEN) - -#define __HAL_RCC_LPTIM1_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_LPTIM1SMEN) - -#define __HAL_RCC_LPUART1_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB1SMENR2, RCC_APB1SMENR2_LPUART1SMEN) - -#if defined(SWPMI1) -#define __HAL_RCC_SWPMI1_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB1SMENR2, RCC_APB1SMENR2_SWPMI1SMEN) -#endif /* SWPMI1 */ - -#define __HAL_RCC_LPTIM2_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB1SMENR2, RCC_APB1SMENR2_LPTIM2SMEN) - - -#define __HAL_RCC_TIM2_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_TIM2SMEN) - -#if defined(TIM3) -#define __HAL_RCC_TIM3_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_TIM3SMEN) -#endif /* TIM3 */ - -#if defined(TIM4) -#define __HAL_RCC_TIM4_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_TIM4SMEN) -#endif /* TIM4 */ - -#if defined(TIM5) -#define __HAL_RCC_TIM5_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_TIM5SMEN) -#endif /* TIM5 */ - -#define __HAL_RCC_TIM6_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_TIM6SMEN) - -#if defined(TIM7) -#define __HAL_RCC_TIM7_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_TIM7SMEN) -#endif /* TIM7 */ - -#if defined(LCD) -#define __HAL_RCC_LCD_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_LCDSMEN) -#endif /* LCD */ - -#if defined(RCC_APB1SMENR1_RTCAPBSMEN) -#define __HAL_RCC_RTCAPB_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_RTCAPBSMEN) -#endif /* RCC_APB1SMENR1_RTCAPBSMEN */ - -#define __HAL_RCC_WWDG_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_WWDGSMEN) - -#if defined(SPI2) -#define __HAL_RCC_SPI2_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_SPI2SMEN) -#endif /* SPI2 */ - -#if defined(SPI3) -#define __HAL_RCC_SPI3_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_SPI3SMEN) -#endif /* SPI3 */ - -#define __HAL_RCC_USART2_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_USART2SMEN) - -#if defined(USART3) -#define __HAL_RCC_USART3_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_USART3SMEN) -#endif /* USART3 */ - -#if defined(UART4) -#define __HAL_RCC_UART4_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_UART4SMEN) -#endif /* UART4 */ - -#if defined(UART5) -#define __HAL_RCC_UART5_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_UART5SMEN) -#endif /* UART5 */ - -#define __HAL_RCC_I2C1_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_I2C1SMEN) - -#if defined(I2C2) -#define __HAL_RCC_I2C2_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_I2C2SMEN) -#endif /* I2C2 */ - -#define __HAL_RCC_I2C3_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_I2C3SMEN) - -#if defined(I2C4) -#define __HAL_RCC_I2C4_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB1SMENR2, RCC_APB1SMENR2_I2C4SMEN) -#endif /* I2C4 */ - -#if defined(CRS) -#define __HAL_RCC_CRS_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_CRSSMEN) -#endif /* CRS */ - -#if defined(CAN1) -#define __HAL_RCC_CAN1_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_CAN1SMEN) -#endif /* CAN1 */ - -#if defined(CAN2) -#define __HAL_RCC_CAN2_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_CAN2SMEN) -#endif /* CAN2 */ - -#if defined(USB) -#define __HAL_RCC_USB_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_USBFSSMEN) -#endif /* USB */ - -#define __HAL_RCC_PWR_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_PWRSMEN) - -#if defined(DAC1) -#define __HAL_RCC_DAC1_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_DAC1SMEN) -#endif /* DAC1 */ - -#define __HAL_RCC_OPAMP_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_OPAMPSMEN) - -#define __HAL_RCC_LPTIM1_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_LPTIM1SMEN) - -#define __HAL_RCC_LPUART1_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB1SMENR2, RCC_APB1SMENR2_LPUART1SMEN) - -#if defined(SWPMI1) -#define __HAL_RCC_SWPMI1_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB1SMENR2, RCC_APB1SMENR2_SWPMI1SMEN) -#endif /* SWPMI1 */ - -#define __HAL_RCC_LPTIM2_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB1SMENR2, RCC_APB1SMENR2_LPTIM2SMEN) - -/** - * @} - */ - -/** @defgroup RCC_APB2_Clock_Sleep_Enable_Disable APB2 Peripheral Clock Sleep Enable Disable - * @brief Enable or disable the APB2 peripheral clock during Low Power (Sleep) mode. - * @note Peripheral clock gating in SLEEP mode can be used to further reduce - * power consumption. - * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. - * @note By default, all peripheral clocks are enabled during SLEEP mode. - * @{ - */ - -#define __HAL_RCC_SYSCFG_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB2SMENR, RCC_APB2SMENR_SYSCFGSMEN) - -#if defined(SDMMC1) && defined(RCC_APB2SMENR_SDMMC1SMEN) -#define __HAL_RCC_SDMMC1_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB2SMENR, RCC_APB2SMENR_SDMMC1SMEN) -#endif /* SDMMC1 && RCC_APB2SMENR_SDMMC1SMEN */ - -#define __HAL_RCC_TIM1_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB2SMENR, RCC_APB2SMENR_TIM1SMEN) - -#define __HAL_RCC_SPI1_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB2SMENR, RCC_APB2SMENR_SPI1SMEN) - -#if defined(TIM8) -#define __HAL_RCC_TIM8_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB2SMENR, RCC_APB2SMENR_TIM8SMEN) -#endif /* TIM8 */ - -#define __HAL_RCC_USART1_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB2SMENR, RCC_APB2SMENR_USART1SMEN) - -#define __HAL_RCC_TIM15_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB2SMENR, RCC_APB2SMENR_TIM15SMEN) - -#define __HAL_RCC_TIM16_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB2SMENR, RCC_APB2SMENR_TIM16SMEN) - -#if defined(TIM17) -#define __HAL_RCC_TIM17_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB2SMENR, RCC_APB2SMENR_TIM17SMEN) -#endif /* TIM17 */ - -#if defined(SAI1) -#define __HAL_RCC_SAI1_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB2SMENR, RCC_APB2SMENR_SAI1SMEN) -#endif /* SAI1 */ - -#if defined(SAI2) -#define __HAL_RCC_SAI2_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB2SMENR, RCC_APB2SMENR_SAI2SMEN) -#endif /* SAI2 */ - -#if defined(DFSDM1_Filter0) -#define __HAL_RCC_DFSDM1_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB2SMENR, RCC_APB2SMENR_DFSDM1SMEN) -#endif /* DFSDM1_Filter0 */ - -#if defined(LTDC) -#define __HAL_RCC_LTDC_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB2SMENR, RCC_APB2SMENR_LTDCSMEN) -#endif /* LTDC */ - -#if defined(DSI) -#define __HAL_RCC_DSI_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB2SMENR, RCC_APB2SMENR_DSISMEN) -#endif /* DSI */ - - -#define __HAL_RCC_SYSCFG_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB2SMENR, RCC_APB2SMENR_SYSCFGSMEN) - -#if defined(SDMMC1) && defined(RCC_APB2SMENR_SDMMC1SMEN) -#define __HAL_RCC_SDMMC1_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB2SMENR, RCC_APB2SMENR_SDMMC1SMEN) -#endif /* SDMMC1 && RCC_APB2SMENR_SDMMC1SMEN */ - -#define __HAL_RCC_TIM1_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB2SMENR, RCC_APB2SMENR_TIM1SMEN) - -#define __HAL_RCC_SPI1_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB2SMENR, RCC_APB2SMENR_SPI1SMEN) - -#if defined(TIM8) -#define __HAL_RCC_TIM8_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB2SMENR, RCC_APB2SMENR_TIM8SMEN) -#endif /* TIM8 */ - -#define __HAL_RCC_USART1_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB2SMENR, RCC_APB2SMENR_USART1SMEN) - -#define __HAL_RCC_TIM15_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB2SMENR, RCC_APB2SMENR_TIM15SMEN) - -#define __HAL_RCC_TIM16_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB2SMENR, RCC_APB2SMENR_TIM16SMEN) - -#if defined(TIM17) -#define __HAL_RCC_TIM17_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB2SMENR, RCC_APB2SMENR_TIM17SMEN) -#endif /* TIM17 */ - -#if defined(SAI1) -#define __HAL_RCC_SAI1_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB2SMENR, RCC_APB2SMENR_SAI1SMEN) -#endif /* SAI1 */ - -#if defined(SAI2) -#define __HAL_RCC_SAI2_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB2SMENR, RCC_APB2SMENR_SAI2SMEN) -#endif /* SAI2 */ - -#if defined(DFSDM1_Filter0) -#define __HAL_RCC_DFSDM1_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB2SMENR, RCC_APB2SMENR_DFSDM1SMEN) -#endif /* DFSDM1_Filter0 */ - -#if defined(LTDC) -#define __HAL_RCC_LTDC_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB2SMENR, RCC_APB2SMENR_LTDCSMEN) -#endif /* LTDC */ - -#if defined(DSI) -#define __HAL_RCC_DSI_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB2SMENR, RCC_APB2SMENR_DSISMEN) -#endif /* DSI */ - -/** - * @} - */ - -/** @defgroup RCC_AHB1_Clock_Sleep_Enable_Disable_Status AHB1 Peripheral Clock Sleep Enabled or Disabled Status - * @brief Check whether the AHB1 peripheral clock during Low Power (Sleep) mode is enabled or not. - * @note Peripheral clock gating in SLEEP mode can be used to further reduce - * power consumption. - * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. - * @note By default, all peripheral clocks are enabled during SLEEP mode. - * @{ - */ - -#define __HAL_RCC_DMA1_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB1SMENR, RCC_AHB1SMENR_DMA1SMEN) != 0U) - -#define __HAL_RCC_DMA2_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB1SMENR, RCC_AHB1SMENR_DMA2SMEN) != 0U) - -#if defined(DMAMUX1) -#define __HAL_RCC_DMAMUX1_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB1SMENR, RCC_AHB1SMENR_DMAMUX1SMEN) != 0U) -#endif /* DMAMUX1 */ - -#define __HAL_RCC_FLASH_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB1SMENR, RCC_AHB1SMENR_FLASHSMEN) != 0U) - -#define __HAL_RCC_SRAM1_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB1SMENR, RCC_AHB1SMENR_SRAM1SMEN) != 0U) - -#define __HAL_RCC_CRC_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB1SMENR, RCC_AHB1SMENR_CRCSMEN) != 0U) - -#define __HAL_RCC_TSC_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB1SMENR, RCC_AHB1SMENR_TSCSMEN) != 0U) - -#if defined(DMA2D) -#define __HAL_RCC_DMA2D_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB1SMENR, RCC_AHB1SMENR_DMA2DSMEN) != 0U) -#endif /* DMA2D */ - -#if defined(GFXMMU) -#define __HAL_RCC_GFXMMU_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB1SMENR, RCC_AHB1SMENR_GFXMMUSMEN) != 0U) -#endif /* GFXMMU */ - - -#define __HAL_RCC_DMA1_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHB1SMENR, RCC_AHB1SMENR_DMA1SMEN) == 0U) - -#define __HAL_RCC_DMA2_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHB1SMENR, RCC_AHB1SMENR_DMA2SMEN) == 0U) - -#if defined(DMAMUX1) -#define __HAL_RCC_DMAMUX1_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHB1SMENR, RCC_AHB1SMENR_DMAMUX1SMEN) == 0U) -#endif /* DMAMUX1 */ - -#define __HAL_RCC_FLASH_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHB1SMENR, RCC_AHB1SMENR_FLASHSMEN) == 0U) - -#define __HAL_RCC_SRAM1_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHB1SMENR, RCC_AHB1SMENR_SRAM1SMEN) == 0U) - -#define __HAL_RCC_CRC_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHB1SMENR, RCC_AHB1SMENR_CRCSMEN) == 0U) - -#define __HAL_RCC_TSC_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHB1SMENR, RCC_AHB1SMENR_TSCSMEN) == 0U) - -#if defined(DMA2D) -#define __HAL_RCC_DMA2D_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHB1SMENR, RCC_AHB1SMENR_DMA2DSMEN) == 0U) -#endif /* DMA2D */ - -#if defined(GFXMMU) -#define __HAL_RCC_GFXMMU_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHB1SMENR, RCC_AHB1SMENR_GFXMMUSMEN) == 0U) -#endif /* GFXMMU */ - -/** - * @} - */ - -/** @defgroup RCC_AHB2_Clock_Sleep_Enable_Disable_Status AHB2 Peripheral Clock Sleep Enabled or Disabled Status - * @brief Check whether the AHB2 peripheral clock during Low Power (Sleep) mode is enabled or not. - * @note Peripheral clock gating in SLEEP mode can be used to further reduce - * power consumption. - * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. - * @note By default, all peripheral clocks are enabled during SLEEP mode. - * @{ - */ - -#define __HAL_RCC_GPIOA_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_GPIOASMEN) != 0U) - -#define __HAL_RCC_GPIOB_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_GPIOBSMEN) != 0U) - -#define __HAL_RCC_GPIOC_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_GPIOCSMEN) != 0U) - -#if defined(GPIOD) -#define __HAL_RCC_GPIOD_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_GPIODSMEN) != 0U) -#endif /* GPIOD */ - -#if defined(GPIOE) -#define __HAL_RCC_GPIOE_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_GPIOESMEN) != 0U) -#endif /* GPIOE */ - -#if defined(GPIOF) -#define __HAL_RCC_GPIOF_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_GPIOFSMEN) != 0U) -#endif /* GPIOF */ - -#if defined(GPIOG) -#define __HAL_RCC_GPIOG_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_GPIOGSMEN) != 0U) -#endif /* GPIOG */ - -#define __HAL_RCC_GPIOH_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_GPIOHSMEN) != 0U) - -#if defined(GPIOI) -#define __HAL_RCC_GPIOI_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_GPIOISMEN) != 0U) -#endif /* GPIOI */ - -#define __HAL_RCC_SRAM2_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_SRAM2SMEN) != 0U) - -#if defined(SRAM3) -#define __HAL_RCC_SRAM3_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_SRAM3SMEN) != 0U) -#endif /* SRAM3 */ - -#if defined(USB_OTG_FS) -#define __HAL_RCC_USB_OTG_FS_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_OTGFSSMEN) != 0U) -#endif /* USB_OTG_FS */ - -#define __HAL_RCC_ADC_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_ADCSMEN) != 0U) - -#if defined(DCMI) -#define __HAL_RCC_DCMI_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_DCMISMEN) != 0U) -#endif /* DCMI */ - -#if defined(PKA) -#define __HAL_RCC_PKA_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_PKASMEN) != 0U) -#endif /* PKA */ - -#if defined(AES) -#define __HAL_RCC_AES_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_AESSMEN) != 0U) -#endif /* AES */ - -#if defined(HASH) -#define __HAL_RCC_HASH_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_HASHSMEN) != 0U) -#endif /* HASH */ - -#define __HAL_RCC_RNG_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_RNGSMEN) != 0U) - -#if defined(OCTOSPIM) -#define __HAL_RCC_OSPIM_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_OSPIMSMEN) != 0U) -#endif /* OCTOSPIM */ - -#if defined(SDMMC1) && defined(RCC_AHB2SMENR_SDMMC1SMEN) -#define __HAL_RCC_SDMMC1_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_SDMMC1SMEN) != 0U) -#endif /* SDMMC1 && RCC_AHB2SMENR_SDMMC1SMEN */ - -#if defined(SDMMC2) -#define __HAL_RCC_SDMMC2_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_SDMMC2SMEN) != 0U) -#endif /* SDMMC2 */ - - -#define __HAL_RCC_GPIOA_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_GPIOASMEN) == 0U) - -#define __HAL_RCC_GPIOB_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_GPIOBSMEN) == 0U) - -#define __HAL_RCC_GPIOC_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_GPIOCSMEN) == 0U) - -#if defined(GPIOD) -#define __HAL_RCC_GPIOD_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_GPIODSMEN) == 0U) -#endif /* GPIOD */ - -#if defined(GPIOE) -#define __HAL_RCC_GPIOE_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_GPIOESMEN) == 0U) -#endif /* GPIOE */ - -#if defined(GPIOF) -#define __HAL_RCC_GPIOF_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_GPIOFSMEN) == 0U) -#endif /* GPIOF */ - -#if defined(GPIOG) -#define __HAL_RCC_GPIOG_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_GPIOGSMEN) == 0U) -#endif /* GPIOG */ - -#define __HAL_RCC_GPIOH_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_GPIOHSMEN) == 0U) - -#if defined(GPIOI) -#define __HAL_RCC_GPIOI_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_GPIOISMEN) == 0U) -#endif /* GPIOI */ - -#define __HAL_RCC_SRAM2_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_SRAM2SMEN) == 0U) - -#if defined(SRAM3) -#define __HAL_RCC_SRAM3_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_SRAM3SMEN) == 0U) -#endif /* SRAM3 */ - -#if defined(USB_OTG_FS) -#define __HAL_RCC_USB_OTG_FS_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_OTGFSSMEN) == 0U) -#endif /* USB_OTG_FS */ - -#define __HAL_RCC_ADC_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_ADCSMEN) == 0U) - -#if defined(DCMI) -#define __HAL_RCC_DCMI_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_DCMISMEN) == 0U) -#endif /* DCMI */ - -#if defined(PKA) -#define __HAL_RCC_PKA_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_PKASMEN) == 0U) -#endif /* PKA */ - -#if defined(AES) -#define __HAL_RCC_AES_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_AESSMEN) == 0U) -#endif /* AES */ - -#if defined(HASH) -#define __HAL_RCC_HASH_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_HASHSMEN) == 0U) -#endif /* HASH */ - -#define __HAL_RCC_RNG_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_RNGSMEN) == 0U) - -#if defined(OCTOSPIM) -#define __HAL_RCC_OSPIM_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_OSPIMSMEN) == 0U) -#endif /* OCTOSPIM */ - -#if defined(SDMMC1) && defined(RCC_AHB2SMENR_SDMMC1SMEN) -#define __HAL_RCC_SDMMC1_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_SDMMC1SMEN) == 0U) -#endif /* SDMMC1 && RCC_AHB2SMENR_SDMMC1SMEN */ - -#if defined(SDMMC2) -#define __HAL_RCC_SDMMC2_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_SDMMC2SMEN) == 0U) -#endif /* SDMMC2 */ - -/** - * @} - */ - -/** @defgroup RCC_AHB3_Clock_Sleep_Enable_Disable_Status AHB3 Peripheral Clock Sleep Enabled or Disabled Status - * @brief Check whether the AHB3 peripheral clock during Low Power (Sleep) mode is enabled or not. - * @note Peripheral clock gating in SLEEP mode can be used to further reduce - * power consumption. - * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. - * @note By default, all peripheral clocks are enabled during SLEEP mode. - * @{ - */ - -#if defined(QUADSPI) -#define __HAL_RCC_QSPI_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB3SMENR, RCC_AHB3SMENR_QSPISMEN) != 0U) -#endif /* QUADSPI */ - -#if defined(OCTOSPI1) -#define __HAL_RCC_OSPI1_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB3SMENR, RCC_AHB3SMENR_OSPI1SMEN) != 0U) -#endif /* OCTOSPI1 */ - -#if defined(OCTOSPI2) -#define __HAL_RCC_OSPI2_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB3SMENR, RCC_AHB3SMENR_OSPI2SMEN) != 0U) -#endif /* OCTOSPI2 */ - -#if defined(FMC_BANK1) -#define __HAL_RCC_FMC_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB3SMENR, RCC_AHB3SMENR_FMCSMEN) != 0U) -#endif /* FMC_BANK1 */ - - -#if defined(QUADSPI) -#define __HAL_RCC_QSPI_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHB3SMENR, RCC_AHB3SMENR_QSPISMEN) == 0U) -#endif /* QUADSPI */ - -#if defined(OCTOSPI1) -#define __HAL_RCC_OSPI1_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHB3SMENR, RCC_AHB3SMENR_OSPI1SMEN) == 0U) -#endif /* OCTOSPI1 */ - -#if defined(OCTOSPI2) -#define __HAL_RCC_OSPI2_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHB3SMENR, RCC_AHB3SMENR_OSPI2SMEN) == 0U) -#endif /* OCTOSPI2 */ - -#if defined(FMC_BANK1) -#define __HAL_RCC_FMC_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHB3SMENR, RCC_AHB3SMENR_FMCSMEN) == 0U) -#endif /* FMC_BANK1 */ - -/** - * @} - */ - -/** @defgroup RCC_APB1_Clock_Sleep_Enable_Disable_Status APB1 Peripheral Clock Sleep Enabled or Disabled Status - * @brief Check whether the APB1 peripheral clock during Low Power (Sleep) mode is enabled or not. - * @note Peripheral clock gating in SLEEP mode can be used to further reduce - * power consumption. - * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. - * @note By default, all peripheral clocks are enabled during SLEEP mode. - * @{ - */ - -#define __HAL_RCC_TIM2_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_TIM2SMEN) != 0U) - -#if defined(TIM3) -#define __HAL_RCC_TIM3_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_TIM3SMEN) != 0U) -#endif /* TIM3 */ - -#if defined(TIM4) -#define __HAL_RCC_TIM4_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_TIM4SMEN) != 0U) -#endif /* TIM4 */ - -#if defined(TIM5) -#define __HAL_RCC_TIM5_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_TIM5SMEN) != 0U) -#endif /* TIM5 */ - -#define __HAL_RCC_TIM6_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_TIM6SMEN) != 0U) - -#if defined(TIM7) -#define __HAL_RCC_TIM7_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_TIM7SMEN) != 0U) -#endif /* TIM7 */ - -#if defined(LCD) -#define __HAL_RCC_LCD_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_LCDSMEN) != 0U) -#endif /* LCD */ - -#if defined(RCC_APB1SMENR1_RTCAPBSMEN) -#define __HAL_RCC_RTCAPB_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_RTCAPBSMEN) != 0U) -#endif /* RCC_APB1SMENR1_RTCAPBSMEN */ - -#define __HAL_RCC_WWDG_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_WWDGSMEN) != 0U) - -#if defined(SPI2) -#define __HAL_RCC_SPI2_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_SPI2SMEN) != 0U) -#endif /* SPI2 */ - -#if defined(SPI3) -#define __HAL_RCC_SPI3_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_SPI3SMEN) != 0U) -#endif /* SPI3 */ - -#define __HAL_RCC_USART2_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_USART2SMEN) != 0U) - -#if defined(USART3) -#define __HAL_RCC_USART3_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_USART3SMEN) != 0U) -#endif /* USART3 */ - -#if defined(UART4) -#define __HAL_RCC_UART4_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_UART4SMEN) != 0U) -#endif /* UART4 */ - -#if defined(UART5) -#define __HAL_RCC_UART5_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_UART5SMEN) != 0U) -#endif /* UART5 */ - -#define __HAL_RCC_I2C1_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_I2C1SMEN) != 0U) - -#if defined(I2C2) -#define __HAL_RCC_I2C2_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_I2C2SMEN) != 0U) -#endif /* I2C2 */ - -#define __HAL_RCC_I2C3_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_I2C3SMEN) != 0U) - -#if defined(I2C4) -#define __HAL_RCC_I2C4_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1SMENR2, RCC_APB1SMENR2_I2C4SMEN) != 0U) -#endif /* I2C4 */ - -#if defined(CRS) -#define __HAL_RCC_CRS_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_CRSSMEN) != 0U) -#endif /* CRS */ - -#if defined(CAN1) -#define __HAL_RCC_CAN1_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_CAN1SMEN) != 0U) -#endif /* CAN1 */ - -#if defined(CAN2) -#define __HAL_RCC_CAN2_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_CAN2SMEN) != 0U) -#endif /* CAN2 */ - -#if defined(USB) -#define __HAL_RCC_USB_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_USBFSSMEN) != 0U) -#endif /* USB */ - -#define __HAL_RCC_PWR_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_PWRSMEN) != 0U) - -#if defined(DAC1) -#define __HAL_RCC_DAC1_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_DAC1SMEN) != 0U) -#endif /* DAC1 */ - -#define __HAL_RCC_OPAMP_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_OPAMPSMEN) != 0U) - -#define __HAL_RCC_LPTIM1_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_LPTIM1SMEN) != 0U) - -#define __HAL_RCC_LPUART1_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1SMENR2, RCC_APB1SMENR2_LPUART1SMEN) != 0U) - -#if defined(SWPMI1) -#define __HAL_RCC_SWPMI1_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1SMENR2, RCC_APB1SMENR2_SWPMI1SMEN) != 0U) -#endif /* SWPMI1 */ - -#define __HAL_RCC_LPTIM2_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1SMENR2, RCC_APB1SMENR2_LPTIM2SMEN) != 0U) - - -#define __HAL_RCC_TIM2_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_TIM2SMEN) == 0U) - -#if defined(TIM3) -#define __HAL_RCC_TIM3_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_TIM3SMEN) == 0U) -#endif /* TIM3 */ - -#if defined(TIM4) -#define __HAL_RCC_TIM4_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_TIM4SMEN) == 0U) -#endif /* TIM4 */ - -#if defined(TIM5) -#define __HAL_RCC_TIM5_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_TIM5SMEN) == 0U) -#endif /* TIM5 */ - -#define __HAL_RCC_TIM6_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_TIM6SMEN) == 0U) - -#if defined(TIM7) -#define __HAL_RCC_TIM7_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_TIM7SMEN) == 0U) -#endif /* TIM7 */ - -#if defined(LCD) -#define __HAL_RCC_LCD_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_LCDSMEN) == 0U) -#endif /* LCD */ - -#if defined(RCC_APB1SMENR1_RTCAPBSMEN) -#define __HAL_RCC_RTCAPB_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_RTCAPBSMEN) == 0U) -#endif /* RCC_APB1SMENR1_RTCAPBSMEN */ - -#define __HAL_RCC_WWDG_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_WWDGSMEN) == 0U) - -#if defined(SPI2) -#define __HAL_RCC_SPI2_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_SPI2SMEN) == 0U) -#endif /* SPI2 */ - -#if defined(SPI3) -#define __HAL_RCC_SPI3_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_SPI3SMEN) == 0U) -#endif /* SPI3 */ - -#define __HAL_RCC_USART2_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_USART2SMEN) == 0U) - -#if defined(USART3) -#define __HAL_RCC_USART3_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_USART3SMEN) == 0U) -#endif /* USART3 */ - -#if defined(UART4) -#define __HAL_RCC_UART4_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_UART4SMEN) == 0U) -#endif /* UART4 */ - -#if defined(UART5) -#define __HAL_RCC_UART5_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_UART5SMEN) == 0U) -#endif /* UART5 */ - -#define __HAL_RCC_I2C1_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_I2C1SMEN) == 0U) - -#if defined(I2C2) -#define __HAL_RCC_I2C2_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_I2C2SMEN) == 0U) -#endif /* I2C2 */ - -#define __HAL_RCC_I2C3_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_I2C3SMEN) == 0U) - -#if defined(I2C4) -#define __HAL_RCC_I2C4_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB1SMENR2, RCC_APB1SMENR2_I2C4SMEN) == 0U) -#endif /* I2C4 */ - -#if defined(CRS) -#define __HAL_RCC_CRS_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_CRSSMEN) == 0U) -#endif /* CRS */ - -#if defined(CAN1) -#define __HAL_RCC_CAN1_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_CAN1SMEN) == 0U) -#endif /* CAN1 */ - -#if defined(CAN2) -#define __HAL_RCC_CAN2_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_CAN2SMEN) == 0U) -#endif /* CAN2 */ - -#if defined(USB) -#define __HAL_RCC_USB_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_USBFSSMEN) == 0U) -#endif /* USB */ - -#define __HAL_RCC_PWR_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_PWRSMEN) == 0U) - -#if defined(DAC1) -#define __HAL_RCC_DAC1_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_DAC1SMEN) == 0U) -#endif /* DAC1 */ - -#define __HAL_RCC_OPAMP_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_OPAMPSMEN) == 0U) - -#define __HAL_RCC_LPTIM1_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_LPTIM1SMEN) == 0U) - -#define __HAL_RCC_LPUART1_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB1SMENR2, RCC_APB1SMENR2_LPUART1SMEN) == 0U) - -#if defined(SWPMI1) -#define __HAL_RCC_SWPMI1_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB1SMENR2, RCC_APB1SMENR2_SWPMI1SMEN) == 0U) -#endif /* SWPMI1 */ - -#define __HAL_RCC_LPTIM2_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB1SMENR2, RCC_APB1SMENR2_LPTIM2SMEN) == 0U) - -/** - * @} - */ - -/** @defgroup RCC_APB2_Clock_Sleep_Enable_Disable_Status APB2 Peripheral Clock Sleep Enabled or Disabled Status - * @brief Check whether the APB2 peripheral clock during Low Power (Sleep) mode is enabled or not. - * @note Peripheral clock gating in SLEEP mode can be used to further reduce - * power consumption. - * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. - * @note By default, all peripheral clocks are enabled during SLEEP mode. - * @{ - */ - -#define __HAL_RCC_SYSCFG_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB2SMENR, RCC_APB2SMENR_SYSCFGSMEN) != 0U) - -#if defined(SDMMC1) && defined(RCC_APB2SMENR_SDMMC1SMEN) -#define __HAL_RCC_SDMMC1_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB2SMENR, RCC_APB2SMENR_SDMMC1SMEN) != 0U) -#endif /* SDMMC1 && RCC_APB2SMENR_SDMMC1SMEN */ - -#define __HAL_RCC_TIM1_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB2SMENR, RCC_APB2SMENR_TIM1SMEN) != 0U) - -#define __HAL_RCC_SPI1_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB2SMENR, RCC_APB2SMENR_SPI1SMEN) != 0U) - -#if defined(TIM8) -#define __HAL_RCC_TIM8_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB2SMENR, RCC_APB2SMENR_TIM8SMEN) != 0U) -#endif /* TIM8 */ - -#define __HAL_RCC_USART1_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB2SMENR, RCC_APB2SMENR_USART1SMEN) != 0U) - -#define __HAL_RCC_TIM15_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB2SMENR, RCC_APB2SMENR_TIM15SMEN) != 0U) - -#define __HAL_RCC_TIM16_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB2SMENR, RCC_APB2SMENR_TIM16SMEN) != 0U) - -#if defined(TIM17) -#define __HAL_RCC_TIM17_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB2SMENR, RCC_APB2SMENR_TIM17SMEN) != 0U) -#endif /* TIM17 */ - -#if defined(SAI1) -#define __HAL_RCC_SAI1_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB2SMENR, RCC_APB2SMENR_SAI1SMEN) != 0U) -#endif /* SAI1 */ - -#if defined(SAI2) -#define __HAL_RCC_SAI2_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB2SMENR, RCC_APB2SMENR_SAI2SMEN) != 0U) -#endif /* SAI2 */ - -#if defined(DFSDM1_Filter0) -#define __HAL_RCC_DFSDM1_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB2SMENR, RCC_APB2SMENR_DFSDM1SMEN) != 0U) -#endif /* DFSDM1_Filter0 */ - -#if defined(LTDC) -#define __HAL_RCC_LTDC_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB2SMENR, RCC_APB2SMENR_LTDCSMEN) != 0U) -#endif /* LTDC */ - -#if defined(DSI) -#define __HAL_RCC_DSI_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB2SMENR, RCC_APB2SMENR_DSISMEN) != 0U) -#endif /* DSI */ - - -#define __HAL_RCC_SYSCFG_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB2SMENR, RCC_APB2SMENR_SYSCFGSMEN) == 0U) - -#if defined(SDMMC1) && defined(RCC_APB2SMENR_SDMMC1SMEN) -#define __HAL_RCC_SDMMC1_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB2SMENR, RCC_APB2SMENR_SDMMC1SMEN) == 0U) -#endif /* SDMMC1 && RCC_APB2SMENR_SDMMC1SMEN */ - -#define __HAL_RCC_TIM1_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB2SMENR, RCC_APB2SMENR_TIM1SMEN) == 0U) - -#define __HAL_RCC_SPI1_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB2SMENR, RCC_APB2SMENR_SPI1SMEN) == 0U) - -#if defined(TIM8) -#define __HAL_RCC_TIM8_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB2SMENR, RCC_APB2SMENR_TIM8SMEN) == 0U) -#endif /* TIM8 */ - -#define __HAL_RCC_USART1_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB2SMENR, RCC_APB2SMENR_USART1SMEN) == 0U) - -#define __HAL_RCC_TIM15_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB2SMENR, RCC_APB2SMENR_TIM15SMEN) == 0U) - -#define __HAL_RCC_TIM16_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB2SMENR, RCC_APB2SMENR_TIM16SMEN) == 0U) - -#if defined(TIM17) -#define __HAL_RCC_TIM17_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB2SMENR, RCC_APB2SMENR_TIM17SMEN) == 0U) -#endif /* TIM17 */ - -#if defined(SAI1) -#define __HAL_RCC_SAI1_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB2SMENR, RCC_APB2SMENR_SAI1SMEN) == 0U) -#endif /* SAI1 */ - -#if defined(SAI2) -#define __HAL_RCC_SAI2_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB2SMENR, RCC_APB2SMENR_SAI2SMEN) == 0U) -#endif /* SAI2 */ - -#if defined(DFSDM1_Filter0) -#define __HAL_RCC_DFSDM1_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB2SMENR, RCC_APB2SMENR_DFSDM1SMEN) == 0U) -#endif /* DFSDM1_Filter0 */ - -#if defined(LTDC) -#define __HAL_RCC_LTDC_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB2SMENR, RCC_APB2SMENR_LTDCSMEN) == 0U) -#endif /* LTDC */ - -#if defined(DSI) -#define __HAL_RCC_DSI_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB2SMENR, RCC_APB2SMENR_DSISMEN) == 0U) -#endif /* DSI */ - -/** - * @} - */ - -/** @defgroup RCC_Backup_Domain_Reset RCC Backup Domain Reset - * @{ - */ - -/** @brief Macros to force or release the Backup domain reset. - * @note This function resets the RTC peripheral (including the backup registers) - * and the RTC clock source selection in RCC_CSR register. - * @note The BKPSRAM is not affected by this reset. - * @retval None - */ -#define __HAL_RCC_BACKUPRESET_FORCE() SET_BIT(RCC->BDCR, RCC_BDCR_BDRST) - -#define __HAL_RCC_BACKUPRESET_RELEASE() CLEAR_BIT(RCC->BDCR, RCC_BDCR_BDRST) - -/** - * @} - */ - -/** @defgroup RCC_RTC_Clock_Configuration RCC RTC Clock Configuration - * @{ - */ - -/** @brief Macros to enable or disable the RTC clock. - * @note As the RTC is in the Backup domain and write access is denied to - * this domain after reset, you have to enable write access using - * HAL_PWR_EnableBkUpAccess() function before to configure the RTC - * (to be done once after reset). - * @note These macros must be used after the RTC clock source was selected. - * @retval None - */ -#define __HAL_RCC_RTC_ENABLE() SET_BIT(RCC->BDCR, RCC_BDCR_RTCEN) - -#define __HAL_RCC_RTC_DISABLE() CLEAR_BIT(RCC->BDCR, RCC_BDCR_RTCEN) - -/** - * @} - */ - -/** @brief Macros to enable or disable the Internal High Speed 16MHz oscillator (HSI). - * @note The HSI is stopped by hardware when entering STOP and STANDBY modes. - * It is used (enabled by hardware) as system clock source after startup - * from Reset, wakeup from STOP and STANDBY mode, or in case of failure - * of the HSE used directly or indirectly as system clock (if the Clock - * Security System CSS is enabled). - * @note HSI can not be stopped if it is used as system clock source. In this case, - * you have to select another source of the system clock then stop the HSI. - * @note After enabling the HSI, the application software should wait on HSIRDY - * flag to be set indicating that HSI clock is stable and can be used as - * system clock source. - * This parameter can be: ENABLE or DISABLE. - * @note When the HSI is stopped, HSIRDY flag goes low after 6 HSI oscillator - * clock cycles. - * @retval None - */ -#define __HAL_RCC_HSI_ENABLE() SET_BIT(RCC->CR, RCC_CR_HSION) - -#define __HAL_RCC_HSI_DISABLE() CLEAR_BIT(RCC->CR, RCC_CR_HSION) - -/** @brief Macro to adjust the Internal High Speed 16MHz oscillator (HSI) calibration value. - * @note The calibration is used to compensate for the variations in voltage - * and temperature that influence the frequency of the internal HSI RC. - * @param __HSICALIBRATIONVALUE__ specifies the calibration trimming value - * (default is RCC_HSICALIBRATION_DEFAULT). - * This parameter must be a number between 0 and 31 on STM32L43x/STM32L44x/STM32L47x/STM32L48x - * or between 0 and 127 on other devices. - * @retval None - */ -#define __HAL_RCC_HSI_CALIBRATIONVALUE_ADJUST(__HSICALIBRATIONVALUE__) \ - MODIFY_REG(RCC->ICSCR, RCC_ICSCR_HSITRIM, (__HSICALIBRATIONVALUE__) << RCC_ICSCR_HSITRIM_Pos) - -/** - * @brief Macros to enable or disable the wakeup the Internal High Speed oscillator (HSI) - * in parallel to the Internal Multi Speed oscillator (MSI) used at system wakeup. - * @note The enable of this function has not effect on the HSION bit. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -#define __HAL_RCC_HSIAUTOMATIC_START_ENABLE() SET_BIT(RCC->CR, RCC_CR_HSIASFS) - -#define __HAL_RCC_HSIAUTOMATIC_START_DISABLE() CLEAR_BIT(RCC->CR, RCC_CR_HSIASFS) - -/** - * @brief Macros to enable or disable the force of the Internal High Speed oscillator (HSI) - * in STOP mode to be quickly available as kernel clock for USARTs and I2Cs. - * @note Keeping the HSI ON in STOP mode allows to avoid slowing down the communication - * speed because of the HSI startup time. - * @note The enable of this function has not effect on the HSION bit. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -#define __HAL_RCC_HSISTOP_ENABLE() SET_BIT(RCC->CR, RCC_CR_HSIKERON) - -#define __HAL_RCC_HSISTOP_DISABLE() CLEAR_BIT(RCC->CR, RCC_CR_HSIKERON) - -/** - * @brief Macros to enable or disable the Internal Multi Speed oscillator (MSI). - * @note The MSI is stopped by hardware when entering STOP and STANDBY modes. - * It is used (enabled by hardware) as system clock source after - * startup from Reset, wakeup from STOP and STANDBY mode, or in case - * of failure of the HSE used directly or indirectly as system clock - * (if the Clock Security System CSS is enabled). - * @note MSI can not be stopped if it is used as system clock source. - * In this case, you have to select another source of the system - * clock then stop the MSI. - * @note After enabling the MSI, the application software should wait on - * MSIRDY flag to be set indicating that MSI clock is stable and can - * be used as system clock source. - * @note When the MSI is stopped, MSIRDY flag goes low after 6 MSI oscillator - * clock cycles. - * @retval None - */ -#define __HAL_RCC_MSI_ENABLE() SET_BIT(RCC->CR, RCC_CR_MSION) - -#define __HAL_RCC_MSI_DISABLE() CLEAR_BIT(RCC->CR, RCC_CR_MSION) - -/** @brief Macro Adjusts the Internal Multi Speed oscillator (MSI) calibration value. - * @note The calibration is used to compensate for the variations in voltage - * and temperature that influence the frequency of the internal MSI RC. - * Refer to the Application Note AN3300 for more details on how to - * calibrate the MSI. - * @param __MSICALIBRATIONVALUE__ specifies the calibration trimming value - * (default is RCC_MSICALIBRATION_DEFAULT). - * This parameter must be a number between 0 and 255. - * @retval None - */ -#define __HAL_RCC_MSI_CALIBRATIONVALUE_ADJUST(__MSICALIBRATIONVALUE__) \ - MODIFY_REG(RCC->ICSCR, RCC_ICSCR_MSITRIM, (__MSICALIBRATIONVALUE__) << RCC_ICSCR_MSITRIM_Pos) - -/** - * @brief Macro configures the Internal Multi Speed oscillator (MSI) clock range in run mode - * @note After restart from Reset , the MSI clock is around 4 MHz. - * After stop the startup clock can be MSI (at any of its possible - * frequencies, the one that was used before entering stop mode) or HSI. - * After Standby its frequency can be selected between 4 possible values - * (1, 2, 4 or 8 MHz). - * @note MSIRANGE can be modified when MSI is OFF (MSION=0) or when MSI is ready - * (MSIRDY=1). - * @note The MSI clock range after reset can be modified on the fly. - * @param __MSIRANGEVALUE__ specifies the MSI clock range. - * This parameter must be one of the following values: - * @arg @ref RCC_MSIRANGE_0 MSI clock is around 100 KHz - * @arg @ref RCC_MSIRANGE_1 MSI clock is around 200 KHz - * @arg @ref RCC_MSIRANGE_2 MSI clock is around 400 KHz - * @arg @ref RCC_MSIRANGE_3 MSI clock is around 800 KHz - * @arg @ref RCC_MSIRANGE_4 MSI clock is around 1 MHz - * @arg @ref RCC_MSIRANGE_5 MSI clock is around 2 MHz - * @arg @ref RCC_MSIRANGE_6 MSI clock is around 4 MHz (default after Reset) - * @arg @ref RCC_MSIRANGE_7 MSI clock is around 8 MHz - * @arg @ref RCC_MSIRANGE_8 MSI clock is around 16 MHz - * @arg @ref RCC_MSIRANGE_9 MSI clock is around 24 MHz - * @arg @ref RCC_MSIRANGE_10 MSI clock is around 32 MHz - * @arg @ref RCC_MSIRANGE_11 MSI clock is around 48 MHz - * @retval None - */ -#define __HAL_RCC_MSI_RANGE_CONFIG(__MSIRANGEVALUE__) \ - do { \ - SET_BIT(RCC->CR, RCC_CR_MSIRGSEL); \ - MODIFY_REG(RCC->CR, RCC_CR_MSIRANGE, (__MSIRANGEVALUE__)); \ - } while(0) - -/** - * @brief Macro configures the Internal Multi Speed oscillator (MSI) clock range after Standby mode - * After Standby its frequency can be selected between 4 possible values (1, 2, 4 or 8 MHz). - * @param __MSIRANGEVALUE__ specifies the MSI clock range. - * This parameter must be one of the following values: - * @arg @ref RCC_MSIRANGE_4 MSI clock is around 1 MHz - * @arg @ref RCC_MSIRANGE_5 MSI clock is around 2 MHz - * @arg @ref RCC_MSIRANGE_6 MSI clock is around 4 MHz (default after Reset) - * @arg @ref RCC_MSIRANGE_7 MSI clock is around 8 MHz - * @retval None - */ -#define __HAL_RCC_MSI_STANDBY_RANGE_CONFIG(__MSIRANGEVALUE__) \ - MODIFY_REG(RCC->CSR, RCC_CSR_MSISRANGE, (__MSIRANGEVALUE__) << 4U) - -/** @brief Macro to get the Internal Multi Speed oscillator (MSI) clock range in run mode - * @retval MSI clock range. - * This parameter must be one of the following values: - * @arg @ref RCC_MSIRANGE_0 MSI clock is around 100 KHz - * @arg @ref RCC_MSIRANGE_1 MSI clock is around 200 KHz - * @arg @ref RCC_MSIRANGE_2 MSI clock is around 400 KHz - * @arg @ref RCC_MSIRANGE_3 MSI clock is around 800 KHz - * @arg @ref RCC_MSIRANGE_4 MSI clock is around 1 MHz - * @arg @ref RCC_MSIRANGE_5 MSI clock is around 2 MHz - * @arg @ref RCC_MSIRANGE_6 MSI clock is around 4 MHz (default after Reset) - * @arg @ref RCC_MSIRANGE_7 MSI clock is around 8 MHz - * @arg @ref RCC_MSIRANGE_8 MSI clock is around 16 MHz - * @arg @ref RCC_MSIRANGE_9 MSI clock is around 24 MHz - * @arg @ref RCC_MSIRANGE_10 MSI clock is around 32 MHz - * @arg @ref RCC_MSIRANGE_11 MSI clock is around 48 MHz - */ -#define __HAL_RCC_GET_MSI_RANGE() \ - ((READ_BIT(RCC->CR, RCC_CR_MSIRGSEL) != 0U) ? \ - READ_BIT(RCC->CR, RCC_CR_MSIRANGE) : \ - (READ_BIT(RCC->CSR, RCC_CSR_MSISRANGE) >> 4U)) - -/** @brief Macros to enable or disable the Internal Low Speed oscillator (LSI). - * @note After enabling the LSI, the application software should wait on - * LSIRDY flag to be set indicating that LSI clock is stable and can - * be used to clock the IWDG and/or the RTC. - * @note LSI can not be disabled if the IWDG is running. - * @note When the LSI is stopped, LSIRDY flag goes low after 6 LSI oscillator - * clock cycles. - * @retval None - */ -#define __HAL_RCC_LSI_ENABLE() SET_BIT(RCC->CSR, RCC_CSR_LSION) - -#define __HAL_RCC_LSI_DISABLE() CLEAR_BIT(RCC->CSR, RCC_CSR_LSION) - -/** - * @brief Macro to configure the External High Speed oscillator (HSE). - * @note Transition HSE Bypass to HSE On and HSE On to HSE Bypass are not - * supported by this macro. User should request a transition to HSE Off - * first and then HSE On or HSE Bypass. - * @note After enabling the HSE (RCC_HSE_ON or RCC_HSE_Bypass), the application - * software should wait on HSERDY flag to be set indicating that HSE clock - * is stable and can be used to clock the PLL and/or system clock. - * @note HSE state can not be changed if it is used directly or through the - * PLL as system clock. In this case, you have to select another source - * of the system clock then change the HSE state (ex. disable it). - * @note The HSE is stopped by hardware when entering STOP and STANDBY modes. - * @note This function reset the CSSON bit, so if the clock security system(CSS) - * was previously enabled you have to enable it again after calling this - * function. - * @param __STATE__ specifies the new state of the HSE. - * This parameter can be one of the following values: - * @arg @ref RCC_HSE_OFF Turn OFF the HSE oscillator, HSERDY flag goes low after - * 6 HSE oscillator clock cycles. - * @arg @ref RCC_HSE_ON Turn ON the HSE oscillator. - * @arg @ref RCC_HSE_BYPASS HSE oscillator bypassed with external clock. - * @retval None - */ -#define __HAL_RCC_HSE_CONFIG(__STATE__) \ - do { \ - if((__STATE__) == RCC_HSE_ON) \ - { \ - SET_BIT(RCC->CR, RCC_CR_HSEON); \ - } \ - else if((__STATE__) == RCC_HSE_BYPASS) \ - { \ - SET_BIT(RCC->CR, RCC_CR_HSEBYP); \ - SET_BIT(RCC->CR, RCC_CR_HSEON); \ - } \ - else \ - { \ - CLEAR_BIT(RCC->CR, RCC_CR_HSEON); \ - CLEAR_BIT(RCC->CR, RCC_CR_HSEBYP); \ - } \ - } while(0) - -/** - * @brief Macro to configure the External Low Speed oscillator (LSE). - * @note Transitions LSE Bypass to LSE On and LSE On to LSE Bypass are not - * supported by this macro. User should request a transition to LSE Off - * first and then LSE On or LSE Bypass. - * @note As the LSE is in the Backup domain and write access is denied to - * this domain after reset, you have to enable write access using - * HAL_PWR_EnableBkUpAccess() function before to configure the LSE - * (to be done once after reset). - * @note After enabling the LSE (RCC_LSE_ON or RCC_LSE_BYPASS), the application - * software should wait on LSERDY flag to be set indicating that LSE clock - * is stable and can be used to clock the RTC. - * @param __STATE__ specifies the new state of the LSE. - * This parameter can be one of the following values: - * @arg @ref RCC_LSE_OFF Turn OFF the LSE oscillator, LSERDY flag goes low after - * 6 LSE oscillator clock cycles. - * @arg @ref RCC_LSE_ON Turn ON the LSE oscillator. - * @arg @ref RCC_LSE_BYPASS LSE oscillator bypassed with external clock. - * @retval None - */ -#define __HAL_RCC_LSE_CONFIG(__STATE__) \ - do { \ - if((__STATE__) == RCC_LSE_ON) \ - { \ - SET_BIT(RCC->BDCR, RCC_BDCR_LSEON); \ - } \ - else if((__STATE__) == RCC_LSE_BYPASS) \ - { \ - SET_BIT(RCC->BDCR, RCC_BDCR_LSEBYP); \ - SET_BIT(RCC->BDCR, RCC_BDCR_LSEON); \ - } \ - else \ - { \ - CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEON); \ - CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEBYP); \ - } \ - } while(0) - -#if defined(RCC_HSI48_SUPPORT) - -/** @brief Macros to enable or disable the Internal High Speed 48MHz oscillator (HSI48). - * @note The HSI48 is stopped by hardware when entering STOP and STANDBY modes. - * @note After enabling the HSI48, the application software should wait on HSI48RDY - * flag to be set indicating that HSI48 clock is stable. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -#define __HAL_RCC_HSI48_ENABLE() SET_BIT(RCC->CRRCR, RCC_CRRCR_HSI48ON) - -#define __HAL_RCC_HSI48_DISABLE() CLEAR_BIT(RCC->CRRCR, RCC_CRRCR_HSI48ON) - -#endif /* RCC_HSI48_SUPPORT */ - -/** @brief Macros to configure the RTC clock (RTCCLK). - * @note As the RTC clock configuration bits are in the Backup domain and write - * access is denied to this domain after reset, you have to enable write - * access using the Power Backup Access macro before to configure - * the RTC clock source (to be done once after reset). - * @note Once the RTC clock is configured it cannot be changed unless the - * Backup domain is reset using __HAL_RCC_BACKUPRESET_FORCE() macro, or by - * a Power On Reset (POR). - * - * @param __RTC_CLKSOURCE__ specifies the RTC clock source. - * This parameter can be one of the following values: - * @arg @ref RCC_RTCCLKSOURCE_NONE No clock selected as RTC clock. - * @arg @ref RCC_RTCCLKSOURCE_LSE LSE selected as RTC clock. - * @arg @ref RCC_RTCCLKSOURCE_LSI LSI selected as RTC clock. - * @arg @ref RCC_RTCCLKSOURCE_HSE_DIV32 HSE clock divided by 32 selected - * - * @note If the LSE or LSI is used as RTC clock source, the RTC continues to - * work in STOP and STANDBY modes, and can be used as wakeup source. - * However, when the HSE clock is used as RTC clock source, the RTC - * cannot be used in STOP and STANDBY modes. - * @note The maximum input clock frequency for RTC is 1MHz (when using HSE as - * RTC clock source). - * @retval None - */ -#define __HAL_RCC_RTC_CONFIG(__RTC_CLKSOURCE__) \ - MODIFY_REG( RCC->BDCR, RCC_BDCR_RTCSEL, (__RTC_CLKSOURCE__)) - - -/** @brief Macro to get the RTC clock source. - * @retval The returned value can be one of the following: - * @arg @ref RCC_RTCCLKSOURCE_NONE No clock selected as RTC clock. - * @arg @ref RCC_RTCCLKSOURCE_LSE LSE selected as RTC clock. - * @arg @ref RCC_RTCCLKSOURCE_LSI LSI selected as RTC clock. - * @arg @ref RCC_RTCCLKSOURCE_HSE_DIV32 HSE clock divided by 32 selected - */ -#define __HAL_RCC_GET_RTC_SOURCE() (READ_BIT(RCC->BDCR, RCC_BDCR_RTCSEL)) - -/** @brief Macros to enable or disable the main PLL. - * @note After enabling the main PLL, the application software should wait on - * PLLRDY flag to be set indicating that PLL clock is stable and can - * be used as system clock source. - * @note The main PLL can not be disabled if it is used as system clock source - * @note The main PLL is disabled by hardware when entering STOP and STANDBY modes. - * @retval None - */ -#define __HAL_RCC_PLL_ENABLE() SET_BIT(RCC->CR, RCC_CR_PLLON) - -#define __HAL_RCC_PLL_DISABLE() CLEAR_BIT(RCC->CR, RCC_CR_PLLON) - -/** @brief Macro to configure the PLL clock source. - * @note This function must be used only when the main PLL is disabled. - * @param __PLLSOURCE__ specifies the PLL entry clock source. - * This parameter can be one of the following values: - * @arg @ref RCC_PLLSOURCE_NONE No clock selected as PLL clock entry - * @arg @ref RCC_PLLSOURCE_MSI MSI oscillator clock selected as PLL clock entry - * @arg @ref RCC_PLLSOURCE_HSI HSI oscillator clock selected as PLL clock entry - * @arg @ref RCC_PLLSOURCE_HSE HSE oscillator clock selected as PLL clock entry - * @note This clock source is common for the main PLL and audio PLL (PLLSAI1 and PLLSAI2). - * @retval None - * - */ -#define __HAL_RCC_PLL_PLLSOURCE_CONFIG(__PLLSOURCE__) \ - MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC, (__PLLSOURCE__)) - -/** @brief Macro to configure the PLL source division factor M. - * @note This function must be used only when the main PLL is disabled. - * @param __PLLM__ specifies the division factor for PLL VCO input clock - * This parameter must be a number between Min_Data = 1 and Max_Data = 16 on STM32L4Rx/STM32L4Sx devices. - * This parameter must be a number between Min_Data = 1 and Max_Data = 8 on other devices. - * @note You have to set the PLLM parameter correctly to ensure that the VCO input - * frequency ranges from 4 to 16 MHz. It is recommended to select a frequency - * of 16 MHz to limit PLL jitter. - * @retval None - * - */ -#define __HAL_RCC_PLL_PLLM_CONFIG(__PLLM__) \ - MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLM, ((__PLLM__) - 1) << 4U) - -/** - * @brief Macro to configure the main PLL clock source, multiplication and division factors. - * @note This function must be used only when the main PLL is disabled. - * - * @param __PLLSOURCE__ specifies the PLL entry clock source. - * This parameter can be one of the following values: - * @arg @ref RCC_PLLSOURCE_NONE No clock selected as PLL clock entry - * @arg @ref RCC_PLLSOURCE_MSI MSI oscillator clock selected as PLL clock entry - * @arg @ref RCC_PLLSOURCE_HSI HSI oscillator clock selected as PLL clock entry - * @arg @ref RCC_PLLSOURCE_HSE HSE oscillator clock selected as PLL clock entry - * @note This clock source is common for the main PLL and audio PLL (PLLSAI1 and PLLSAI2). - * - * @param __PLLM__ specifies the division factor for PLL VCO input clock. - * This parameter must be a number between Min_Data = 1 and Max_Data = 16 on STM32L4Rx/STM32L4Sx devices. - * This parameter must be a number between Min_Data = 1 and Max_Data = 8 on other devices. - * @note You have to set the PLLM parameter correctly to ensure that the VCO input - * frequency ranges from 4 to 16 MHz. It is recommended to select a frequency - * of 16 MHz to limit PLL jitter. - * - * @param __PLLN__ specifies the multiplication factor for PLL VCO output clock. - * This parameter must be a number between 8 and 86. - * @note You have to set the PLLN parameter correctly to ensure that the VCO - * output frequency is between 64 and 344 MHz. - * - * @param __PLLP__ specifies the division factor for SAI clock when SAI available on device. - * This parameter must be a number in the range (7 or 17) for STM32L47x/STM32L48x - * else (2 to 31). - * - * @param __PLLQ__ specifies the division factor for OTG FS, SDMMC1 and RNG clocks. - * This parameter must be in the range (2, 4, 6 or 8). - * @note If the USB OTG FS is used in your application, you have to set the - * PLLQ parameter correctly to have 48 MHz clock for the USB. However, - * the SDMMC1 and RNG need a frequency lower than or equal to 48 MHz to work - * correctly. - * @param __PLLR__ specifies the division factor for the main system clock. - * @note You have to set the PLLR parameter correctly to not exceed 80MHZ. - * This parameter must be in the range (2, 4, 6 or 8). - * @retval None - */ -#if defined(RCC_PLLP_DIV_2_31_SUPPORT) - -#define __HAL_RCC_PLL_CONFIG(__PLLSOURCE__, __PLLM__, __PLLN__, __PLLP__, __PLLQ__,__PLLR__ ) \ - MODIFY_REG(RCC->PLLCFGR, \ - (RCC_PLLCFGR_PLLSRC | RCC_PLLCFGR_PLLM | RCC_PLLCFGR_PLLN | \ - RCC_PLLCFGR_PLLQ | RCC_PLLCFGR_PLLR | RCC_PLLCFGR_PLLP | RCC_PLLCFGR_PLLPDIV), \ - ((__PLLSOURCE__) | \ - (((__PLLM__) - 1U) << RCC_PLLCFGR_PLLM_Pos) | \ - ((__PLLN__) << RCC_PLLCFGR_PLLN_Pos) | \ - ((((__PLLQ__) >> 1U) - 1U) << RCC_PLLCFGR_PLLQ_Pos) | \ - ((((__PLLR__) >> 1U) - 1U) << RCC_PLLCFGR_PLLR_Pos) | \ - ((uint32_t)(__PLLP__) << RCC_PLLCFGR_PLLPDIV_Pos))) - -#elif defined(RCC_PLLP_SUPPORT) - -#define __HAL_RCC_PLL_CONFIG(__PLLSOURCE__, __PLLM__, __PLLN__, __PLLP__, __PLLQ__,__PLLR__ ) \ - MODIFY_REG(RCC->PLLCFGR, \ - (RCC_PLLCFGR_PLLSRC | RCC_PLLCFGR_PLLM | RCC_PLLCFGR_PLLN | \ - RCC_PLLCFGR_PLLQ | RCC_PLLCFGR_PLLR | RCC_PLLCFGR_PLLP), \ - ((__PLLSOURCE__) | \ - (((__PLLM__) - 1U) << RCC_PLLCFGR_PLLM_Pos) | \ - ((__PLLN__) << RCC_PLLCFGR_PLLN_Pos) | \ - ((((__PLLQ__) >> 1U) - 1U) << RCC_PLLCFGR_PLLQ_Pos) | \ - ((((__PLLR__) >> 1U) - 1U) << RCC_PLLCFGR_PLLR_Pos) | \ - (((__PLLP__) >> 4U) << RCC_PLLCFGR_PLLP_Pos))) - -#else - -#define __HAL_RCC_PLL_CONFIG(__PLLSOURCE__, __PLLM__, __PLLN__, __PLLQ__,__PLLR__ ) \ - MODIFY_REG(RCC->PLLCFGR, \ - (RCC_PLLCFGR_PLLSRC | RCC_PLLCFGR_PLLM | RCC_PLLCFGR_PLLN | \ - RCC_PLLCFGR_PLLQ | RCC_PLLCFGR_PLLR), \ - ((__PLLSOURCE__) | \ - (((__PLLM__) - 1U) << RCC_PLLCFGR_PLLM_Pos) | \ - ((__PLLN__) << RCC_PLLCFGR_PLLN_Pos) | \ - ((((__PLLQ__) >> 1U) - 1U) << RCC_PLLCFGR_PLLQ_Pos) | \ - ((((__PLLR__) >> 1U) - 1U) << RCC_PLLCFGR_PLLR_Pos))) - -#endif /* RCC_PLLP_DIV_2_31_SUPPORT */ - -/** @brief Macro to get the oscillator used as PLL clock source. - * @retval The oscillator used as PLL clock source. The returned value can be one - * of the following: - * - RCC_PLLSOURCE_NONE: No oscillator is used as PLL clock source. - * - RCC_PLLSOURCE_MSI: MSI oscillator is used as PLL clock source. - * - RCC_PLLSOURCE_HSI: HSI oscillator is used as PLL clock source. - * - RCC_PLLSOURCE_HSE: HSE oscillator is used as PLL clock source. - */ -#define __HAL_RCC_GET_PLL_OSCSOURCE() (READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC)) - -/** - * @brief Enable or disable each clock output (RCC_PLL_SYSCLK, RCC_PLL_48M1CLK, RCC_PLL_SAI3CLK) - * @note Enabling/disabling clock outputs RCC_PLL_SAI3CLK and RCC_PLL_48M1CLK can be done at anytime - * without the need to stop the PLL in order to save power. But RCC_PLL_SYSCLK cannot - * be stopped if used as System Clock. - * @param __PLLCLOCKOUT__ specifies the PLL clock to be output. - * This parameter can be one or a combination of the following values: - * @arg @ref RCC_PLL_SAI3CLK This clock is used to generate an accurate clock to achieve - * high-quality audio performance on SAI interface in case. - * @arg @ref RCC_PLL_48M1CLK This Clock is used to generate the clock for the USB OTG FS (48 MHz), - * the random analog generator (<=48 MHz) and the SDMMC1 (<= 48 MHz). - * @arg @ref RCC_PLL_SYSCLK This Clock is used to generate the high speed system clock (up to 80MHz) - * @retval None - */ -#define __HAL_RCC_PLLCLKOUT_ENABLE(__PLLCLOCKOUT__) SET_BIT(RCC->PLLCFGR, (__PLLCLOCKOUT__)) - -#define __HAL_RCC_PLLCLKOUT_DISABLE(__PLLCLOCKOUT__) CLEAR_BIT(RCC->PLLCFGR, (__PLLCLOCKOUT__)) - -/** - * @brief Get clock output enable status (RCC_PLL_SYSCLK, RCC_PLL_48M1CLK, RCC_PLL_SAI3CLK) - * @param __PLLCLOCKOUT__ specifies the output PLL clock to be checked. - * This parameter can be one of the following values: - * @arg @ref RCC_PLL_SAI3CLK This clock is used to generate an accurate clock to achieve - * high-quality audio performance on SAI interface in case. - * @arg @ref RCC_PLL_48M1CLK This Clock is used to generate the clock for the USB OTG FS (48 MHz), - * the random analog generator (<=48 MHz) and the SDMMC1 (<= 48 MHz). - * @arg @ref RCC_PLL_SYSCLK This Clock is used to generate the high speed system clock (up to 80MHz) - * @retval SET / RESET - */ -#define __HAL_RCC_GET_PLLCLKOUT_CONFIG(__PLLCLOCKOUT__) READ_BIT(RCC->PLLCFGR, (__PLLCLOCKOUT__)) - -/** - * @brief Macro to configure the system clock source. - * @param __SYSCLKSOURCE__ specifies the system clock source. - * This parameter can be one of the following values: - * - RCC_SYSCLKSOURCE_MSI: MSI oscillator is used as system clock source. - * - RCC_SYSCLKSOURCE_HSI: HSI oscillator is used as system clock source. - * - RCC_SYSCLKSOURCE_HSE: HSE oscillator is used as system clock source. - * - RCC_SYSCLKSOURCE_PLLCLK: PLL output is used as system clock source. - * @retval None - */ -#define __HAL_RCC_SYSCLK_CONFIG(__SYSCLKSOURCE__) \ - MODIFY_REG(RCC->CFGR, RCC_CFGR_SW, (__SYSCLKSOURCE__)) - -/** @brief Macro to get the clock source used as system clock. - * @retval The clock source used as system clock. The returned value can be one - * of the following: - * - RCC_SYSCLKSOURCE_STATUS_MSI: MSI used as system clock. - * - RCC_SYSCLKSOURCE_STATUS_HSI: HSI used as system clock. - * - RCC_SYSCLKSOURCE_STATUS_HSE: HSE used as system clock. - * - RCC_SYSCLKSOURCE_STATUS_PLLCLK: PLL used as system clock. - */ -#define __HAL_RCC_GET_SYSCLK_SOURCE() (READ_BIT(RCC->CFGR, RCC_CFGR_SWS)) - -/** - * @brief Macro to configure the External Low Speed oscillator (LSE) drive capability. - * @note As the LSE is in the Backup domain and write access is denied to - * this domain after reset, you have to enable write access using - * HAL_PWR_EnableBkUpAccess() function before to configure the LSE - * (to be done once after reset). - * @param __LSEDRIVE__ specifies the new state of the LSE drive capability. - * This parameter can be one of the following values: - * @arg @ref RCC_LSEDRIVE_LOW LSE oscillator low drive capability. - * @arg @ref RCC_LSEDRIVE_MEDIUMLOW LSE oscillator medium low drive capability. - * @arg @ref RCC_LSEDRIVE_MEDIUMHIGH LSE oscillator medium high drive capability. - * @arg @ref RCC_LSEDRIVE_HIGH LSE oscillator high drive capability. - * @retval None - */ -#define __HAL_RCC_LSEDRIVE_CONFIG(__LSEDRIVE__) \ - MODIFY_REG(RCC->BDCR, RCC_BDCR_LSEDRV, (__LSEDRIVE__)) - -/** - * @brief Macro to configure the wake up from stop clock. - * @param __STOPWUCLK__ specifies the clock source used after wake up from stop. - * This parameter can be one of the following values: - * @arg @ref RCC_STOP_WAKEUPCLOCK_MSI MSI selected as system clock source - * @arg @ref RCC_STOP_WAKEUPCLOCK_HSI HSI selected as system clock source - * @retval None - */ -#define __HAL_RCC_WAKEUPSTOP_CLK_CONFIG(__STOPWUCLK__) \ - MODIFY_REG(RCC->CFGR, RCC_CFGR_STOPWUCK, (__STOPWUCLK__)) - - -/** @brief Macro to configure the MCO clock. - * @param __MCOCLKSOURCE__ specifies the MCO clock source. - * This parameter can be one of the following values: - * @arg @ref RCC_MCO1SOURCE_NOCLOCK MCO output disabled - * @arg @ref RCC_MCO1SOURCE_SYSCLK System clock selected as MCO source - * @arg @ref RCC_MCO1SOURCE_MSI MSI clock selected as MCO source - * @arg @ref RCC_MCO1SOURCE_HSI HSI clock selected as MCO source - * @arg @ref RCC_MCO1SOURCE_HSE HSE clock selected as MCO sourcee - * @arg @ref RCC_MCO1SOURCE_PLLCLK Main PLL clock selected as MCO source - * @arg @ref RCC_MCO1SOURCE_LSI LSI clock selected as MCO source - * @arg @ref RCC_MCO1SOURCE_LSE LSE clock selected as MCO source - @if STM32L443xx - * @arg @ref RCC_MCO1SOURCE_HSI48 HSI48 clock selected as MCO source for devices with HSI48 - @endif - @if STM32L4A6xx - * @arg @ref RCC_MCO1SOURCE_HSI48 HSI48 clock selected as MCO source for devices with HSI48 - @endif - * @param __MCODIV__ specifies the MCO clock prescaler. - * This parameter can be one of the following values: - * @arg @ref RCC_MCODIV_1 MCO clock source is divided by 1 - * @arg @ref RCC_MCODIV_2 MCO clock source is divided by 2 - * @arg @ref RCC_MCODIV_4 MCO clock source is divided by 4 - * @arg @ref RCC_MCODIV_8 MCO clock source is divided by 8 - * @arg @ref RCC_MCODIV_16 MCO clock source is divided by 16 - */ -#define __HAL_RCC_MCO1_CONFIG(__MCOCLKSOURCE__, __MCODIV__) \ - MODIFY_REG(RCC->CFGR, (RCC_CFGR_MCOSEL | RCC_CFGR_MCOPRE), ((__MCOCLKSOURCE__) | (__MCODIV__))) - -/** @defgroup RCC_Flags_Interrupts_Management Flags Interrupts Management - * @brief macros to manage the specified RCC Flags and interrupts. - * @{ - */ - -/** @brief Enable RCC interrupt(s). - * @param __INTERRUPT__ specifies the RCC interrupt source(s) to be enabled. - * This parameter can be any combination of the following values: - * @arg @ref RCC_IT_LSIRDY LSI ready interrupt - * @arg @ref RCC_IT_LSERDY LSE ready interrupt - * @arg @ref RCC_IT_MSIRDY HSI ready interrupt - * @arg @ref RCC_IT_HSIRDY HSI ready interrupt - * @arg @ref RCC_IT_HSERDY HSE ready interrupt - * @arg @ref RCC_IT_PLLRDY Main PLL ready interrupt - * @arg @ref RCC_IT_PLLSAI1RDY PLLSAI1 ready interrupt for devices with PLLSAI1 - * @arg @ref RCC_IT_PLLSAI2RDY PLLSAI2 ready interrupt for devices with PLLSAI2 - * @arg @ref RCC_IT_LSECSS LSE Clock security system interrupt - @if STM32L443xx - * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt for devices with HSI48 - @endif - @if STM32L4A6xx - * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt for devices with HSI48 - @endif - * @retval None - */ -#define __HAL_RCC_ENABLE_IT(__INTERRUPT__) SET_BIT(RCC->CIER, (__INTERRUPT__)) - -/** @brief Disable RCC interrupt(s). - * @param __INTERRUPT__ specifies the RCC interrupt source(s) to be disabled. - * This parameter can be any combination of the following values: - * @arg @ref RCC_IT_LSIRDY LSI ready interrupt - * @arg @ref RCC_IT_LSERDY LSE ready interrupt - * @arg @ref RCC_IT_MSIRDY HSI ready interrupt - * @arg @ref RCC_IT_HSIRDY HSI ready interrupt - * @arg @ref RCC_IT_HSERDY HSE ready interrupt - * @arg @ref RCC_IT_PLLRDY Main PLL ready interrupt - * @arg @ref RCC_IT_PLLSAI1RDY PLLSAI1 ready interrupt for devices with PLLSAI1 - * @arg @ref RCC_IT_PLLSAI2RDY PLLSAI2 ready interrupt for devices with PLLSAI2 - * @arg @ref RCC_IT_LSECSS LSE Clock security system interrupt - @if STM32L443xx - * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt for devices with HSI48 - @endif - @if STM32L4A6xx - * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt for devices with HSI48 - @endif - * @retval None - */ -#define __HAL_RCC_DISABLE_IT(__INTERRUPT__) CLEAR_BIT(RCC->CIER, (__INTERRUPT__)) - -/** @brief Clear the RCC's interrupt pending bits. - * @param __INTERRUPT__ specifies the interrupt pending bit to clear. - * This parameter can be any combination of the following values: - * @arg @ref RCC_IT_LSIRDY LSI ready interrupt - * @arg @ref RCC_IT_LSERDY LSE ready interrupt - * @arg @ref RCC_IT_MSIRDY MSI ready interrupt - * @arg @ref RCC_IT_HSIRDY HSI ready interrupt - * @arg @ref RCC_IT_HSERDY HSE ready interrupt - * @arg @ref RCC_IT_PLLRDY Main PLL ready interrupt - * @arg @ref RCC_IT_PLLSAI1RDY PLLSAI1 ready interrupt for devices with PLLSAI1 - * @arg @ref RCC_IT_PLLSAI2RDY PLLSAI2 ready interrupt for devices with PLLSAI2 - * @arg @ref RCC_IT_CSS HSE Clock security system interrupt - * @arg @ref RCC_IT_LSECSS LSE Clock security system interrupt - @if STM32L443xx - * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt for devices with HSI48 - @endif - @if STM32L4A6xx - * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt for devices with HSI48 - @endif - * @retval None - */ -#define __HAL_RCC_CLEAR_IT(__INTERRUPT__) WRITE_REG(RCC->CICR, (__INTERRUPT__)) - -/** @brief Check whether the RCC interrupt has occurred or not. - * @param __INTERRUPT__ specifies the RCC interrupt source to check. - * This parameter can be one of the following values: - * @arg @ref RCC_IT_LSIRDY LSI ready interrupt - * @arg @ref RCC_IT_LSERDY LSE ready interrupt - * @arg @ref RCC_IT_MSIRDY MSI ready interrupt - * @arg @ref RCC_IT_HSIRDY HSI ready interrupt - * @arg @ref RCC_IT_HSERDY HSE ready interrupt - * @arg @ref RCC_IT_PLLRDY Main PLL ready interrupt - * @arg @ref RCC_IT_PLLSAI1RDY PLLSAI1 ready interrupt for devices with PLLSAI1 - * @arg @ref RCC_IT_PLLSAI2RDY PLLSAI2 ready interrupt for devices with PLLSAI2 - * @arg @ref RCC_IT_CSS HSE Clock security system interrupt - * @arg @ref RCC_IT_LSECSS LSE Clock security system interrupt - @if STM32L443xx - * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt for devices with HSI48 - @endif - @if STM32L4A6xx - * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt for devices with HSI48 - @endif - * @retval The new state of __INTERRUPT__ (TRUE or FALSE). - */ -#define __HAL_RCC_GET_IT(__INTERRUPT__) (READ_BIT(RCC->CIFR, (__INTERRUPT__)) == (__INTERRUPT__)) - -/** @brief Set RMVF bit to clear the reset flags. - * The reset flags are: RCC_FLAG_FWRRST, RCC_FLAG_OBLRST, RCC_FLAG_PINRST, RCC_FLAG_BORRST, - * RCC_FLAG_SFTRST, RCC_FLAG_IWDGRST, RCC_FLAG_WWDGRST and RCC_FLAG_LPWRRST. - * @retval None - */ -#define __HAL_RCC_CLEAR_RESET_FLAGS() SET_BIT(RCC->CSR, RCC_CSR_RMVF) - -/** @brief Check whether the selected RCC flag is set or not. - * @param __FLAG__ specifies the flag to check. - * This parameter can be one of the following values: - * @arg @ref RCC_FLAG_MSIRDY MSI oscillator clock ready - * @arg @ref RCC_FLAG_HSIRDY HSI oscillator clock ready - * @arg @ref RCC_FLAG_HSERDY HSE oscillator clock ready - * @arg @ref RCC_FLAG_PLLRDY Main PLL clock ready - * @arg @ref RCC_FLAG_PLLSAI1RDY PLLSAI1 clock ready for devices with PLLSAI1 - * @arg @ref RCC_FLAG_PLLSAI2RDY PLLSAI2 clock ready for devices with PLLSAI2 - @if STM32L443xx - * @arg @ref RCC_FLAG_HSI48RDY HSI48 clock ready for devices with HSI48 - @endif - @if STM32L4A6xx - * @arg @ref RCC_FLAG_HSI48RDY HSI48 clock ready for devices with HSI48 - @endif - * @arg @ref RCC_FLAG_LSERDY LSE oscillator clock ready - * @arg @ref RCC_FLAG_LSECSSD Clock security system failure on LSE oscillator detection - * @arg @ref RCC_FLAG_LSIRDY LSI oscillator clock ready - * @arg @ref RCC_FLAG_BORRST BOR reset - * @arg @ref RCC_FLAG_OBLRST OBLRST reset - * @arg @ref RCC_FLAG_PINRST Pin reset - * @arg @ref RCC_FLAG_FWRST FIREWALL reset - * @arg @ref RCC_FLAG_SFTRST Software reset - * @arg @ref RCC_FLAG_IWDGRST Independent Watchdog reset - * @arg @ref RCC_FLAG_WWDGRST Window Watchdog reset - * @arg @ref RCC_FLAG_LPWRRST Low Power reset - * @retval The new state of __FLAG__ (TRUE or FALSE). - */ -#if defined(RCC_HSI48_SUPPORT) -#define __HAL_RCC_GET_FLAG(__FLAG__) (((((((__FLAG__) >> 5U) == 1U) ? RCC->CR : \ - ((((__FLAG__) >> 5U) == 4U) ? RCC->CRRCR : \ - ((((__FLAG__) >> 5U) == 2U) ? RCC->BDCR : \ - ((((__FLAG__) >> 5U) == 3U) ? RCC->CSR : RCC->CIFR)))) & \ - (1U << ((__FLAG__) & RCC_FLAG_MASK))) != 0U) ? 1U : 0U) -#else -#define __HAL_RCC_GET_FLAG(__FLAG__) (((((((__FLAG__) >> 5U) == 1U) ? RCC->CR : \ - ((((__FLAG__) >> 5U) == 2U) ? RCC->BDCR : \ - ((((__FLAG__) >> 5U) == 3U) ? RCC->CSR : RCC->CIFR))) & \ - (1U << ((__FLAG__) & RCC_FLAG_MASK))) != 0U) ? 1U : 0U) -#endif /* RCC_HSI48_SUPPORT */ - -/** - * @} - */ - -/** - * @} - */ - -/* Private constants ---------------------------------------------------------*/ -/** @defgroup RCC_Private_Constants RCC Private Constants - * @{ - */ -/* Defines used for Flags */ -#define CR_REG_INDEX 1U -#define BDCR_REG_INDEX 2U -#define CSR_REG_INDEX 3U -#if defined(RCC_HSI48_SUPPORT) -#define CRRCR_REG_INDEX 4U -#endif /* RCC_HSI48_SUPPORT */ - -#define RCC_FLAG_MASK 0x1FU - -/* Defines Oscillator Masks */ -#if defined(RCC_HSI48_SUPPORT) -#define RCC_OSCILLATORTYPE_ALL (RCC_OSCILLATORTYPE_HSE | RCC_OSCILLATORTYPE_HSI | RCC_OSCILLATORTYPE_HSI48 | RCC_OSCILLATORTYPE_MSI | RCC_OSCILLATORTYPE_LSI | RCC_OSCILLATORTYPE_LSE) /*!< All Oscillator to configure */ -#else -#define RCC_OSCILLATORTYPE_ALL (RCC_OSCILLATORTYPE_HSE | RCC_OSCILLATORTYPE_HSI | RCC_OSCILLATORTYPE_MSI | RCC_OSCILLATORTYPE_LSI | RCC_OSCILLATORTYPE_LSE) /*!< All Oscillator to configure */ -#endif /* RCC_HSI48_SUPPORT */ - -/** @defgroup RCC_Reset_Flag Reset Flag - * @{ - */ -#define RCC_RESET_FLAG_OBL RCC_CSR_OBLRSTF /*!< Option Byte Loader reset flag */ -#define RCC_RESET_FLAG_PIN RCC_CSR_PINRSTF /*!< PIN reset flag */ -#define RCC_RESET_FLAG_PWR RCC_CSR_BORRSTF /*!< BOR or POR/PDR reset flag */ -#define RCC_RESET_FLAG_SW RCC_CSR_SFTRSTF /*!< Software Reset flag */ -#define RCC_RESET_FLAG_IWDG RCC_CSR_IWDGRSTF /*!< Independent Watchdog reset flag */ -#define RCC_RESET_FLAG_WWDG RCC_CSR_WWDGRSTF /*!< Window watchdog reset flag */ -#define RCC_RESET_FLAG_LPWR RCC_CSR_LPWRRSTF /*!< Low power reset flag */ -#define RCC_RESET_FLAG_ALL (RCC_RESET_FLAG_OBL | RCC_RESET_FLAG_PIN | RCC_RESET_FLAG_PWR | \ - RCC_RESET_FLAG_SW | RCC_RESET_FLAG_IWDG | RCC_RESET_FLAG_WWDG | \ - RCC_RESET_FLAG_LPWR) -/** - * @} - */ - -/** - * @} - */ - -/* Private macros ------------------------------------------------------------*/ -/** @addtogroup RCC_Private_Macros - * @{ - */ - -#define IS_RCC_OSCILLATORTYPE(__OSCILLATOR__) (((__OSCILLATOR__) == RCC_OSCILLATORTYPE_NONE) || \ - (((__OSCILLATOR__) & ~RCC_OSCILLATORTYPE_ALL) == 0x00U)) - -#define IS_RCC_HSE(__HSE__) (((__HSE__) == RCC_HSE_OFF) || ((__HSE__) == RCC_HSE_ON) || \ - ((__HSE__) == RCC_HSE_BYPASS)) - -#if defined(RCC_BDCR_LSESYSDIS) -#define IS_RCC_LSE(__LSE__) (((__LSE__) == RCC_LSE_OFF) || ((__LSE__) == RCC_LSE_ON) || ((__LSE__) == RCC_LSE_BYPASS_RTC_ONLY) || \ - ((__LSE__) == RCC_LSE_ON_RTC_ONLY) || ((__LSE__) == RCC_LSE_BYPASS)) -#else -#define IS_RCC_LSE(__LSE__) (((__LSE__) == RCC_LSE_OFF) || ((__LSE__) == RCC_LSE_ON) || \ - ((__LSE__) == RCC_LSE_BYPASS)) -#endif /* RCC_BDCR_LSESYSDIS */ - -#define IS_RCC_HSI(__HSI__) (((__HSI__) == RCC_HSI_OFF) || ((__HSI__) == RCC_HSI_ON)) - -#define IS_RCC_HSI_CALIBRATION_VALUE(__VALUE__) ((__VALUE__) <= (RCC_ICSCR_HSITRIM >> RCC_ICSCR_HSITRIM_Pos)) - -#define IS_RCC_LSI(__LSI__) (((__LSI__) == RCC_LSI_OFF) || ((__LSI__) == RCC_LSI_ON)) - -#if defined(RCC_CSR_LSIPREDIV) -#define IS_RCC_LSIDIV(__LSIDIV__) (((__LSIDIV__) == RCC_LSI_DIV1) || ((__LSIDIV__) == RCC_LSI_DIV128)) -#endif /* RCC_CSR_LSIPREDIV */ - -#define IS_RCC_MSI(__MSI__) (((__MSI__) == RCC_MSI_OFF) || ((__MSI__) == RCC_MSI_ON)) - -#define IS_RCC_MSICALIBRATION_VALUE(__VALUE__) ((__VALUE__) <= 255U) - -#if defined(RCC_HSI48_SUPPORT) -#define IS_RCC_HSI48(__HSI48__) (((__HSI48__) == RCC_HSI48_OFF) || ((__HSI48__) == RCC_HSI48_ON)) -#endif /* RCC_HSI48_SUPPORT */ - -#define IS_RCC_PLL(__PLL__) (((__PLL__) == RCC_PLL_NONE) ||((__PLL__) == RCC_PLL_OFF) || \ - ((__PLL__) == RCC_PLL_ON)) - -#define IS_RCC_PLLSOURCE(__SOURCE__) (((__SOURCE__) == RCC_PLLSOURCE_NONE) || \ - ((__SOURCE__) == RCC_PLLSOURCE_MSI) || \ - ((__SOURCE__) == RCC_PLLSOURCE_HSI) || \ - ((__SOURCE__) == RCC_PLLSOURCE_HSE)) - -#if defined(RCC_PLLM_DIV_1_16_SUPPORT) -#define IS_RCC_PLLM_VALUE(__VALUE__) ((1U <= (__VALUE__)) && ((__VALUE__) <= 16U)) -#else -#define IS_RCC_PLLM_VALUE(__VALUE__) ((1U <= (__VALUE__)) && ((__VALUE__) <= 8U)) -#endif /*RCC_PLLM_DIV_1_16_SUPPORT */ - -#define IS_RCC_PLLN_VALUE(__VALUE__) ((8U <= (__VALUE__)) && ((__VALUE__) <= 86U)) - -#if defined(RCC_PLLP_DIV_2_31_SUPPORT) -#define IS_RCC_PLLP_VALUE(__VALUE__) (((__VALUE__) >= 2U) && ((__VALUE__) <= 31U)) -#else -#define IS_RCC_PLLP_VALUE(__VALUE__) (((__VALUE__) == 7U) || ((__VALUE__) == 17U)) -#endif /*RCC_PLLP_DIV_2_31_SUPPORT */ - -#define IS_RCC_PLLQ_VALUE(__VALUE__) (((__VALUE__) == 2U) || ((__VALUE__) == 4U) || \ - ((__VALUE__) == 6U) || ((__VALUE__) == 8U)) - -#define IS_RCC_PLLR_VALUE(__VALUE__) (((__VALUE__) == 2U) || ((__VALUE__) == 4U) || \ - ((__VALUE__) == 6U) || ((__VALUE__) == 8U)) - -#if defined(RCC_PLLSAI1_SUPPORT) -#define IS_RCC_PLLSAI1CLOCKOUT_VALUE(__VALUE__) (((((__VALUE__) & RCC_PLLSAI1_SAI1CLK) == RCC_PLLSAI1_SAI1CLK) || \ - (((__VALUE__) & RCC_PLLSAI1_48M2CLK) == RCC_PLLSAI1_48M2CLK) || \ - (((__VALUE__) & RCC_PLLSAI1_ADC1CLK) == RCC_PLLSAI1_ADC1CLK)) && \ - (((__VALUE__) & ~(RCC_PLLSAI1_SAI1CLK|RCC_PLLSAI1_48M2CLK|RCC_PLLSAI1_ADC1CLK)) == 0U)) -#endif /* RCC_PLLSAI1_SUPPORT */ - -#if defined(RCC_PLLSAI2_SUPPORT) -#if defined(STM32L471xx) || defined(STM32L475xx) || defined(STM32L476xx) || defined(STM32L485xx) || defined(STM32L486xx) || defined(STM32L496xx) || defined(STM32L4A6xx) -#define IS_RCC_PLLSAI2CLOCKOUT_VALUE(__VALUE__) (((((__VALUE__) & RCC_PLLSAI2_SAI2CLK) == RCC_PLLSAI2_SAI2CLK) || \ - (((__VALUE__) & RCC_PLLSAI2_ADC2CLK) == RCC_PLLSAI2_ADC2CLK)) && \ - (((__VALUE__) & ~(RCC_PLLSAI2_SAI2CLK|RCC_PLLSAI2_ADC2CLK)) == 0U)) -#elif defined(STM32L4P5xx) || defined(STM32L4Q5xx) || defined(STM32L4R5xx) || defined(STM32L4R7xx) || defined(STM32L4R9xx) || defined(STM32L4S5xx) || defined(STM32L4S7xx) || defined(STM32L4S9xx) -#define IS_RCC_PLLSAI2CLOCKOUT_VALUE(__VALUE__) (((((__VALUE__) & RCC_PLLSAI2_SAI2CLK) == RCC_PLLSAI2_SAI2CLK) || \ - (((__VALUE__) & RCC_PLLSAI2_DSICLK) == RCC_PLLSAI2_DSICLK) || \ - (((__VALUE__) & RCC_PLLSAI2_LTDCCLK) == RCC_PLLSAI2_LTDCCLK)) && \ - (((__VALUE__) & ~(RCC_PLLSAI2_SAI2CLK|RCC_PLLSAI2_DSICLK|RCC_PLLSAI2_LTDCCLK)) == 0U)) -#endif /* STM32L471xx || STM32L475xx || STM32L476xx || STM32L485xx || STM32L486xx || STM32L496xx || STM32L4A6xx */ -#endif /* RCC_PLLSAI2_SUPPORT */ - -#define IS_RCC_MSI_CLOCK_RANGE(__RANGE__) (((__RANGE__) == RCC_MSIRANGE_0) || \ - ((__RANGE__) == RCC_MSIRANGE_1) || \ - ((__RANGE__) == RCC_MSIRANGE_2) || \ - ((__RANGE__) == RCC_MSIRANGE_3) || \ - ((__RANGE__) == RCC_MSIRANGE_4) || \ - ((__RANGE__) == RCC_MSIRANGE_5) || \ - ((__RANGE__) == RCC_MSIRANGE_6) || \ - ((__RANGE__) == RCC_MSIRANGE_7) || \ - ((__RANGE__) == RCC_MSIRANGE_8) || \ - ((__RANGE__) == RCC_MSIRANGE_9) || \ - ((__RANGE__) == RCC_MSIRANGE_10) || \ - ((__RANGE__) == RCC_MSIRANGE_11)) - -#define IS_RCC_MSI_STANDBY_CLOCK_RANGE(__RANGE__) (((__RANGE__) == RCC_MSIRANGE_4) || \ - ((__RANGE__) == RCC_MSIRANGE_5) || \ - ((__RANGE__) == RCC_MSIRANGE_6) || \ - ((__RANGE__) == RCC_MSIRANGE_7)) - -#define IS_RCC_CLOCKTYPE(__CLK__) ((1U <= (__CLK__)) && ((__CLK__) <= 15U)) - -#define IS_RCC_SYSCLKSOURCE(__SOURCE__) (((__SOURCE__) == RCC_SYSCLKSOURCE_MSI) || \ - ((__SOURCE__) == RCC_SYSCLKSOURCE_HSI) || \ - ((__SOURCE__) == RCC_SYSCLKSOURCE_HSE) || \ - ((__SOURCE__) == RCC_SYSCLKSOURCE_PLLCLK)) - -#define IS_RCC_HCLK(__HCLK__) (((__HCLK__) == RCC_SYSCLK_DIV1) || ((__HCLK__) == RCC_SYSCLK_DIV2) || \ - ((__HCLK__) == RCC_SYSCLK_DIV4) || ((__HCLK__) == RCC_SYSCLK_DIV8) || \ - ((__HCLK__) == RCC_SYSCLK_DIV16) || ((__HCLK__) == RCC_SYSCLK_DIV64) || \ - ((__HCLK__) == RCC_SYSCLK_DIV128) || ((__HCLK__) == RCC_SYSCLK_DIV256) || \ - ((__HCLK__) == RCC_SYSCLK_DIV512)) - -#define IS_RCC_PCLK(__PCLK__) (((__PCLK__) == RCC_HCLK_DIV1) || ((__PCLK__) == RCC_HCLK_DIV2) || \ - ((__PCLK__) == RCC_HCLK_DIV4) || ((__PCLK__) == RCC_HCLK_DIV8) || \ - ((__PCLK__) == RCC_HCLK_DIV16)) - -#define IS_RCC_RTCCLKSOURCE(__SOURCE__) (((__SOURCE__) == RCC_RTCCLKSOURCE_NONE) || \ - ((__SOURCE__) == RCC_RTCCLKSOURCE_LSE) || \ - ((__SOURCE__) == RCC_RTCCLKSOURCE_LSI) || \ - ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV32)) - -#define IS_RCC_MCO(__MCOX__) ((__MCOX__) == RCC_MCO1) - -#if defined(RCC_HSI48_SUPPORT) -#define IS_RCC_MCO1SOURCE(__SOURCE__) (((__SOURCE__) == RCC_MCO1SOURCE_NOCLOCK) || \ - ((__SOURCE__) == RCC_MCO1SOURCE_SYSCLK) || \ - ((__SOURCE__) == RCC_MCO1SOURCE_MSI) || \ - ((__SOURCE__) == RCC_MCO1SOURCE_HSI) || \ - ((__SOURCE__) == RCC_MCO1SOURCE_HSE) || \ - ((__SOURCE__) == RCC_MCO1SOURCE_PLLCLK) || \ - ((__SOURCE__) == RCC_MCO1SOURCE_LSI) || \ - ((__SOURCE__) == RCC_MCO1SOURCE_LSE) || \ - ((__SOURCE__) == RCC_MCO1SOURCE_HSI48)) -#else -#define IS_RCC_MCO1SOURCE(__SOURCE__) (((__SOURCE__) == RCC_MCO1SOURCE_NOCLOCK) || \ - ((__SOURCE__) == RCC_MCO1SOURCE_SYSCLK) || \ - ((__SOURCE__) == RCC_MCO1SOURCE_MSI) || \ - ((__SOURCE__) == RCC_MCO1SOURCE_HSI) || \ - ((__SOURCE__) == RCC_MCO1SOURCE_HSE) || \ - ((__SOURCE__) == RCC_MCO1SOURCE_PLLCLK) || \ - ((__SOURCE__) == RCC_MCO1SOURCE_LSI) || \ - ((__SOURCE__) == RCC_MCO1SOURCE_LSE)) -#endif /* RCC_HSI48_SUPPORT */ - -#define IS_RCC_MCODIV(__DIV__) (((__DIV__) == RCC_MCODIV_1) || ((__DIV__) == RCC_MCODIV_2) || \ - ((__DIV__) == RCC_MCODIV_4) || ((__DIV__) == RCC_MCODIV_8) || \ - ((__DIV__) == RCC_MCODIV_16)) - -#define IS_RCC_LSE_DRIVE(__DRIVE__) (((__DRIVE__) == RCC_LSEDRIVE_LOW) || \ - ((__DRIVE__) == RCC_LSEDRIVE_MEDIUMLOW) || \ - ((__DRIVE__) == RCC_LSEDRIVE_MEDIUMHIGH) || \ - ((__DRIVE__) == RCC_LSEDRIVE_HIGH)) - -#define IS_RCC_STOP_WAKEUPCLOCK(__SOURCE__) (((__SOURCE__) == RCC_STOP_WAKEUPCLOCK_MSI) || \ - ((__SOURCE__) == RCC_STOP_WAKEUPCLOCK_HSI)) -/** - * @} - */ - -/* Include RCC HAL Extended module */ -#include "stm32l4xx_hal_rcc_ex.h" - -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup RCC_Exported_Functions - * @{ - */ - - -/** @addtogroup RCC_Exported_Functions_Group1 - * @{ - */ - -/* Initialization and de-initialization functions ******************************/ -HAL_StatusTypeDef HAL_RCC_DeInit(void); -HAL_StatusTypeDef HAL_RCC_OscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct); -HAL_StatusTypeDef HAL_RCC_ClockConfig(RCC_ClkInitTypeDef *RCC_ClkInitStruct, uint32_t FLatency); - -/** - * @} - */ - -/** @addtogroup RCC_Exported_Functions_Group2 - * @{ - */ - -/* Peripheral Control functions ************************************************/ -void HAL_RCC_MCOConfig(uint32_t RCC_MCOx, uint32_t RCC_MCOSource, uint32_t RCC_MCODiv); -void HAL_RCC_EnableCSS(void); -uint32_t HAL_RCC_GetSysClockFreq(void); -uint32_t HAL_RCC_GetHCLKFreq(void); -uint32_t HAL_RCC_GetPCLK1Freq(void); -uint32_t HAL_RCC_GetPCLK2Freq(void); -void HAL_RCC_GetOscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct); -void HAL_RCC_GetClockConfig(RCC_ClkInitTypeDef *RCC_ClkInitStruct, uint32_t *pFLatency); -/* CSS NMI IRQ handler */ -void HAL_RCC_NMI_IRQHandler(void); -/* User Callbacks in non blocking mode (IT mode) */ -void HAL_RCC_CSSCallback(void); - -uint32_t HAL_RCC_GetResetSource(void); -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /* STM32L4xx_HAL_RCC_H */ - +/** + ****************************************************************************** + * @file stm32l4xx_hal_rcc.h + * @author MCD Application Team + * @brief Header file of RCC HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file in + * the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32L4xx_HAL_RCC_H +#define STM32L4xx_HAL_RCC_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l4xx_hal_def.h" + +/** @addtogroup STM32L4xx_HAL_Driver + * @{ + */ + +/** @addtogroup RCC + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup RCC_Exported_Types RCC Exported Types + * @{ + */ + +/** + * @brief RCC PLL configuration structure definition + */ +typedef struct +{ + uint32_t PLLState; /*!< The new state of the PLL. + This parameter can be a value of @ref RCC_PLL_Config */ + + uint32_t PLLSource; /*!< RCC_PLLSource: PLL entry clock source. + This parameter must be a value of @ref RCC_PLL_Clock_Source */ + + uint32_t PLLM; /*!< PLLM: Division factor for PLL VCO input clock. + This parameter must be a number between Min_Data = 1 and Max_Data = 16 on STM32L4Rx/STM32L4Sx devices. + This parameter must be a number between Min_Data = 1 and Max_Data = 8 on the other devices */ + + uint32_t PLLN; /*!< PLLN: Multiplication factor for PLL VCO output clock. + This parameter must be a number between Min_Data = 8 and Max_Data = 86 */ + +#if defined(RCC_PLLP_SUPPORT) + uint32_t PLLP; /*!< PLLP: Division factor for SAI clock. + This parameter must be a value of @ref RCC_PLLP_Clock_Divider */ +#endif /* RCC_PLLP_SUPPORT */ + + uint32_t PLLQ; /*!< PLLQ: Division factor for SDMMC1, RNG and USB clocks. + This parameter must be a value of @ref RCC_PLLQ_Clock_Divider */ + + uint32_t PLLR; /*!< PLLR: Division for the main system clock. + User have to set the PLLR parameter correctly to not exceed max frequency 120MHZ + on STM32L4Rx/STM32L4Sx devices else 80MHz on the other devices. + This parameter must be a value of @ref RCC_PLLR_Clock_Divider */ + +}RCC_PLLInitTypeDef; + +/** + * @brief RCC Internal/External Oscillator (HSE, HSI, MSI, LSE and LSI) configuration structure definition + */ +typedef struct +{ + uint32_t OscillatorType; /*!< The oscillators to be configured. + This parameter can be a value of @ref RCC_Oscillator_Type */ + + uint32_t HSEState; /*!< The new state of the HSE. + This parameter can be a value of @ref RCC_HSE_Config */ + + uint32_t LSEState; /*!< The new state of the LSE. + This parameter can be a value of @ref RCC_LSE_Config */ + + uint32_t HSIState; /*!< The new state of the HSI. + This parameter can be a value of @ref RCC_HSI_Config */ + + uint32_t HSICalibrationValue; /*!< The calibration trimming value (default is RCC_HSICALIBRATION_DEFAULT). + This parameter must be a number between Min_Data = 0 and Max_Data = 31 on + STM32L43x/STM32L44x/STM32L47x/STM32L48x devices. + This parameter must be a number between Min_Data = 0 and Max_Data = 127 on + the other devices */ + + uint32_t LSIState; /*!< The new state of the LSI. + This parameter can be a value of @ref RCC_LSI_Config */ +#if defined(RCC_CSR_LSIPREDIV) + + uint32_t LSIDiv; /*!< The division factor of the LSI. + This parameter can be a value of @ref RCC_LSI_Div */ +#endif /* RCC_CSR_LSIPREDIV */ + + uint32_t MSIState; /*!< The new state of the MSI. + This parameter can be a value of @ref RCC_MSI_Config */ + + uint32_t MSICalibrationValue; /*!< The calibration trimming value (default is RCC_MSICALIBRATION_DEFAULT). + This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF */ + + uint32_t MSIClockRange; /*!< The MSI frequency range. + This parameter can be a value of @ref RCC_MSI_Clock_Range */ + + uint32_t HSI48State; /*!< The new state of the HSI48 (only applicable to STM32L43x/STM32L44x/STM32L49x/STM32L4Ax devices). + This parameter can be a value of @ref RCC_HSI48_Config */ + + RCC_PLLInitTypeDef PLL; /*!< Main PLL structure parameters */ + +}RCC_OscInitTypeDef; + +/** + * @brief RCC System, AHB and APB busses clock configuration structure definition + */ +typedef struct +{ + uint32_t ClockType; /*!< The clock to be configured. + This parameter can be a value of @ref RCC_System_Clock_Type */ + + uint32_t SYSCLKSource; /*!< The clock source used as system clock (SYSCLK). + This parameter can be a value of @ref RCC_System_Clock_Source */ + + uint32_t AHBCLKDivider; /*!< The AHB clock (HCLK) divider. This clock is derived from the system clock (SYSCLK). + This parameter can be a value of @ref RCC_AHB_Clock_Source */ + + uint32_t APB1CLKDivider; /*!< The APB1 clock (PCLK1) divider. This clock is derived from the AHB clock (HCLK). + This parameter can be a value of @ref RCC_APB1_APB2_Clock_Source */ + + uint32_t APB2CLKDivider; /*!< The APB2 clock (PCLK2) divider. This clock is derived from the AHB clock (HCLK). + This parameter can be a value of @ref RCC_APB1_APB2_Clock_Source */ + +}RCC_ClkInitTypeDef; + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup RCC_Exported_Constants RCC Exported Constants + * @{ + */ + +/** @defgroup RCC_Timeout_Value Timeout Values + * @{ + */ +#define RCC_DBP_TIMEOUT_VALUE 2U /* 2 ms (minimum Tick + 1) */ +#define RCC_LSE_TIMEOUT_VALUE LSE_STARTUP_TIMEOUT +/** + * @} + */ + +/** @defgroup RCC_Oscillator_Type Oscillator Type + * @{ + */ +#define RCC_OSCILLATORTYPE_NONE 0x00000000U /*!< Oscillator configuration unchanged */ +#define RCC_OSCILLATORTYPE_HSE 0x00000001U /*!< HSE to configure */ +#define RCC_OSCILLATORTYPE_HSI 0x00000002U /*!< HSI to configure */ +#define RCC_OSCILLATORTYPE_LSE 0x00000004U /*!< LSE to configure */ +#define RCC_OSCILLATORTYPE_LSI 0x00000008U /*!< LSI to configure */ +#define RCC_OSCILLATORTYPE_MSI 0x00000010U /*!< MSI to configure */ +#if defined(RCC_HSI48_SUPPORT) +#define RCC_OSCILLATORTYPE_HSI48 0x00000020U /*!< HSI48 to configure */ +#endif /* RCC_HSI48_SUPPORT */ +/** + * @} + */ + +/** @defgroup RCC_HSE_Config HSE Config + * @{ + */ +#define RCC_HSE_OFF 0x00000000U /*!< HSE clock deactivation */ +#define RCC_HSE_ON RCC_CR_HSEON /*!< HSE clock activation */ +#define RCC_HSE_BYPASS (RCC_CR_HSEBYP | RCC_CR_HSEON) /*!< External clock source for HSE clock */ +/** + * @} + */ + +/** @defgroup RCC_LSE_Config LSE Config + * @{ + */ +#define RCC_LSE_OFF 0x00000000U /*!< LSE clock deactivation */ +#define RCC_LSE_ON RCC_BDCR_LSEON /*!< LSE clock activation */ +#define RCC_LSE_BYPASS (RCC_BDCR_LSEBYP | RCC_BDCR_LSEON) /*!< External clock source for LSE clock */ +#if defined(RCC_BDCR_LSESYSDIS) +#define RCC_LSE_ON_RTC_ONLY (RCC_BDCR_LSESYSDIS | RCC_BDCR_LSEON) /*!< LSE clock activation without propagation to system */ +#define RCC_LSE_BYPASS_RTC_ONLY (RCC_BDCR_LSEBYP | RCC_BDCR_LSESYSDIS | RCC_BDCR_LSEON) /*!< External clock source for LSE clock without propagation to system */ +#endif /* RCC_BDCR_LSESYSDIS */ +/** + * @} + */ + +/** @defgroup RCC_HSI_Config HSI Config + * @{ + */ +#define RCC_HSI_OFF 0x00000000U /*!< HSI clock deactivation */ +#define RCC_HSI_ON RCC_CR_HSION /*!< HSI clock activation */ + +#if defined(RCC_ICSCR_HSITRIM_6) +#define RCC_HSICALIBRATION_DEFAULT 0x40U /*!< Default HSI calibration trimming value 64 on devices other than STM32L43x/STM32L44x/STM32L47x/STM32L48x */ +#else +#define RCC_HSICALIBRATION_DEFAULT 0x10U /*!< Default HSI calibration trimming value 16 on STM32L43x/STM32L44x/STM32L47x/STM32L48x devices */ +#endif /* RCC_ICSCR_HSITRIM_6 */ +/** + * @} + */ + +/** @defgroup RCC_LSI_Config LSI Config + * @{ + */ +#define RCC_LSI_OFF 0x00000000U /*!< LSI clock deactivation */ +#define RCC_LSI_ON RCC_CSR_LSION /*!< LSI clock activation */ +/** + * @} + */ +#if defined(RCC_CSR_LSIPREDIV) + +/** @defgroup RCC_LSI_Div LSI Div + * @{ + */ +#define RCC_LSI_DIV1 0x00000000U /*!< LSI clock not divided */ +#define RCC_LSI_DIV128 RCC_CSR_LSIPREDIV /*!< LSI clock divided by 128 */ +/** + * @} + */ +#endif /* RCC_CSR_LSIPREDIV */ + +/** @defgroup RCC_MSI_Config MSI Config + * @{ + */ +#define RCC_MSI_OFF 0x00000000U /*!< MSI clock deactivation */ +#define RCC_MSI_ON RCC_CR_MSION /*!< MSI clock activation */ + +#define RCC_MSICALIBRATION_DEFAULT 0U /*!< Default MSI calibration trimming value */ +/** + * @} + */ + +#if defined(RCC_HSI48_SUPPORT) +/** @defgroup RCC_HSI48_Config HSI48 Config + * @{ + */ +#define RCC_HSI48_OFF 0x00000000U /*!< HSI48 clock deactivation */ +#define RCC_HSI48_ON RCC_CRRCR_HSI48ON /*!< HSI48 clock activation */ +/** + * @} + */ +#else +/** @defgroup RCC_HSI48_Config HSI48 Config + * @{ + */ +#define RCC_HSI48_OFF 0x00000000U /*!< HSI48 clock deactivation */ +/** + * @} + */ +#endif /* RCC_HSI48_SUPPORT */ + +/** @defgroup RCC_PLL_Config PLL Config + * @{ + */ +#define RCC_PLL_NONE 0x00000000U /*!< PLL configuration unchanged */ +#define RCC_PLL_OFF 0x00000001U /*!< PLL deactivation */ +#define RCC_PLL_ON 0x00000002U /*!< PLL activation */ +/** + * @} + */ + +#if defined(RCC_PLLP_SUPPORT) +/** @defgroup RCC_PLLP_Clock_Divider PLLP Clock Divider + * @{ + */ +#if defined(RCC_PLLP_DIV_2_31_SUPPORT) +#define RCC_PLLP_DIV2 0x00000002U /*!< PLLP division factor = 2 */ +#define RCC_PLLP_DIV3 0x00000003U /*!< PLLP division factor = 3 */ +#define RCC_PLLP_DIV4 0x00000004U /*!< PLLP division factor = 4 */ +#define RCC_PLLP_DIV5 0x00000005U /*!< PLLP division factor = 5 */ +#define RCC_PLLP_DIV6 0x00000006U /*!< PLLP division factor = 6 */ +#define RCC_PLLP_DIV7 0x00000007U /*!< PLLP division factor = 7 */ +#define RCC_PLLP_DIV8 0x00000008U /*!< PLLP division factor = 8 */ +#define RCC_PLLP_DIV9 0x00000009U /*!< PLLP division factor = 9 */ +#define RCC_PLLP_DIV10 0x0000000AU /*!< PLLP division factor = 10 */ +#define RCC_PLLP_DIV11 0x0000000BU /*!< PLLP division factor = 11 */ +#define RCC_PLLP_DIV12 0x0000000CU /*!< PLLP division factor = 12 */ +#define RCC_PLLP_DIV13 0x0000000DU /*!< PLLP division factor = 13 */ +#define RCC_PLLP_DIV14 0x0000000EU /*!< PLLP division factor = 14 */ +#define RCC_PLLP_DIV15 0x0000000FU /*!< PLLP division factor = 15 */ +#define RCC_PLLP_DIV16 0x00000010U /*!< PLLP division factor = 16 */ +#define RCC_PLLP_DIV17 0x00000011U /*!< PLLP division factor = 17 */ +#define RCC_PLLP_DIV18 0x00000012U /*!< PLLP division factor = 18 */ +#define RCC_PLLP_DIV19 0x00000013U /*!< PLLP division factor = 19 */ +#define RCC_PLLP_DIV20 0x00000014U /*!< PLLP division factor = 20 */ +#define RCC_PLLP_DIV21 0x00000015U /*!< PLLP division factor = 21 */ +#define RCC_PLLP_DIV22 0x00000016U /*!< PLLP division factor = 22 */ +#define RCC_PLLP_DIV23 0x00000017U /*!< PLLP division factor = 23 */ +#define RCC_PLLP_DIV24 0x00000018U /*!< PLLP division factor = 24 */ +#define RCC_PLLP_DIV25 0x00000019U /*!< PLLP division factor = 25 */ +#define RCC_PLLP_DIV26 0x0000001AU /*!< PLLP division factor = 26 */ +#define RCC_PLLP_DIV27 0x0000001BU /*!< PLLP division factor = 27 */ +#define RCC_PLLP_DIV28 0x0000001CU /*!< PLLP division factor = 28 */ +#define RCC_PLLP_DIV29 0x0000001DU /*!< PLLP division factor = 29 */ +#define RCC_PLLP_DIV30 0x0000001EU /*!< PLLP division factor = 30 */ +#define RCC_PLLP_DIV31 0x0000001FU /*!< PLLP division factor = 31 */ +#else +#define RCC_PLLP_DIV7 0x00000007U /*!< PLLP division factor = 7 */ +#define RCC_PLLP_DIV17 0x00000011U /*!< PLLP division factor = 17 */ +#endif /* RCC_PLLP_DIV_2_31_SUPPORT */ +/** + * @} + */ +#endif /* RCC_PLLP_SUPPORT */ + +/** @defgroup RCC_PLLQ_Clock_Divider PLLQ Clock Divider + * @{ + */ +#define RCC_PLLQ_DIV2 0x00000002U /*!< PLLQ division factor = 2 */ +#define RCC_PLLQ_DIV4 0x00000004U /*!< PLLQ division factor = 4 */ +#define RCC_PLLQ_DIV6 0x00000006U /*!< PLLQ division factor = 6 */ +#define RCC_PLLQ_DIV8 0x00000008U /*!< PLLQ division factor = 8 */ +/** + * @} + */ + +/** @defgroup RCC_PLLR_Clock_Divider PLLR Clock Divider + * @{ + */ +#define RCC_PLLR_DIV2 0x00000002U /*!< PLLR division factor = 2 */ +#define RCC_PLLR_DIV4 0x00000004U /*!< PLLR division factor = 4 */ +#define RCC_PLLR_DIV6 0x00000006U /*!< PLLR division factor = 6 */ +#define RCC_PLLR_DIV8 0x00000008U /*!< PLLR division factor = 8 */ +/** + * @} + */ + +/** @defgroup RCC_PLL_Clock_Source PLL Clock Source + * @{ + */ +#define RCC_PLLSOURCE_NONE 0x00000000U /*!< No clock selected as PLL entry clock source */ +#define RCC_PLLSOURCE_MSI RCC_PLLCFGR_PLLSRC_MSI /*!< MSI clock selected as PLL entry clock source */ +#define RCC_PLLSOURCE_HSI RCC_PLLCFGR_PLLSRC_HSI /*!< HSI clock selected as PLL entry clock source */ +#define RCC_PLLSOURCE_HSE RCC_PLLCFGR_PLLSRC_HSE /*!< HSE clock selected as PLL entry clock source */ +/** + * @} + */ + +/** @defgroup RCC_PLL_Clock_Output PLL Clock Output + * @{ + */ +#if defined(RCC_PLLSAI2_SUPPORT) +#define RCC_PLL_SAI3CLK RCC_PLLCFGR_PLLPEN /*!< PLLSAI3CLK selection from main PLL (for devices with PLLSAI2) */ +#elif defined(RCC_PLLSAI1_SUPPORT) +#define RCC_PLL_SAI2CLK RCC_PLLCFGR_PLLPEN /*!< PLLSAI2CLK selection from main PLL (for devices without PLLSAI2) */ +#endif /* RCC_PLLSAI2_SUPPORT */ +#define RCC_PLL_48M1CLK RCC_PLLCFGR_PLLQEN /*!< PLL48M1CLK selection from main PLL */ +#define RCC_PLL_SYSCLK RCC_PLLCFGR_PLLREN /*!< PLLCLK selection from main PLL */ +/** + * @} + */ +#if defined(RCC_PLLSAI1_SUPPORT) + +/** @defgroup RCC_PLLSAI1_Clock_Output PLLSAI1 Clock Output + * @{ + */ +#define RCC_PLLSAI1_SAI1CLK RCC_PLLSAI1CFGR_PLLSAI1PEN /*!< PLLSAI1CLK selection from PLLSAI1 */ +#define RCC_PLLSAI1_48M2CLK RCC_PLLSAI1CFGR_PLLSAI1QEN /*!< PLL48M2CLK selection from PLLSAI1 */ +#define RCC_PLLSAI1_ADC1CLK RCC_PLLSAI1CFGR_PLLSAI1REN /*!< PLLADC1CLK selection from PLLSAI1 */ +/** + * @} + */ +#endif /* RCC_PLLSAI1_SUPPORT */ + +#if defined(RCC_PLLSAI2_SUPPORT) + +/** @defgroup RCC_PLLSAI2_Clock_Output PLLSAI2 Clock Output + * @{ + */ +#define RCC_PLLSAI2_SAI2CLK RCC_PLLSAI2CFGR_PLLSAI2PEN /*!< PLLSAI2CLK selection from PLLSAI2 */ +#if defined(RCC_PLLSAI2Q_DIV_SUPPORT) +#define RCC_PLLSAI2_DSICLK RCC_PLLSAI2CFGR_PLLSAI2QEN /*!< PLLDSICLK selection from PLLSAI2 */ +#endif /* RCC_PLLSAI2Q_DIV_SUPPORT */ +#if defined(STM32L471xx) || defined(STM32L475xx) || defined(STM32L476xx) || defined(STM32L485xx) || defined(STM32L486xx) || defined(STM32L496xx) || defined(STM32L4A6xx) +#define RCC_PLLSAI2_ADC2CLK RCC_PLLSAI2CFGR_PLLSAI2REN /*!< PLLADC2CLK selection from PLLSAI2 */ +#else +#define RCC_PLLSAI2_LTDCCLK RCC_PLLSAI2CFGR_PLLSAI2REN /*!< PLLLTDCCLK selection from PLLSAI2 */ +#endif /* STM32L471xx || STM32L475xx || STM32L476xx || STM32L485xx || STM32L486xx || STM32L496xx || STM32L4A6xx */ +/** + * @} + */ + +#endif /* RCC_PLLSAI2_SUPPORT */ + +/** @defgroup RCC_MSI_Clock_Range MSI Clock Range + * @{ + */ +#define RCC_MSIRANGE_0 RCC_CR_MSIRANGE_0 /*!< MSI = 100 KHz */ +#define RCC_MSIRANGE_1 RCC_CR_MSIRANGE_1 /*!< MSI = 200 KHz */ +#define RCC_MSIRANGE_2 RCC_CR_MSIRANGE_2 /*!< MSI = 400 KHz */ +#define RCC_MSIRANGE_3 RCC_CR_MSIRANGE_3 /*!< MSI = 800 KHz */ +#define RCC_MSIRANGE_4 RCC_CR_MSIRANGE_4 /*!< MSI = 1 MHz */ +#define RCC_MSIRANGE_5 RCC_CR_MSIRANGE_5 /*!< MSI = 2 MHz */ +#define RCC_MSIRANGE_6 RCC_CR_MSIRANGE_6 /*!< MSI = 4 MHz */ +#define RCC_MSIRANGE_7 RCC_CR_MSIRANGE_7 /*!< MSI = 8 MHz */ +#define RCC_MSIRANGE_8 RCC_CR_MSIRANGE_8 /*!< MSI = 16 MHz */ +#define RCC_MSIRANGE_9 RCC_CR_MSIRANGE_9 /*!< MSI = 24 MHz */ +#define RCC_MSIRANGE_10 RCC_CR_MSIRANGE_10 /*!< MSI = 32 MHz */ +#define RCC_MSIRANGE_11 RCC_CR_MSIRANGE_11 /*!< MSI = 48 MHz */ +/** + * @} + */ + +/** @defgroup RCC_System_Clock_Type System Clock Type + * @{ + */ +#define RCC_CLOCKTYPE_SYSCLK 0x00000001U /*!< SYSCLK to configure */ +#define RCC_CLOCKTYPE_HCLK 0x00000002U /*!< HCLK to configure */ +#define RCC_CLOCKTYPE_PCLK1 0x00000004U /*!< PCLK1 to configure */ +#define RCC_CLOCKTYPE_PCLK2 0x00000008U /*!< PCLK2 to configure */ +/** + * @} + */ + +/** @defgroup RCC_System_Clock_Source System Clock Source + * @{ + */ +#define RCC_SYSCLKSOURCE_MSI RCC_CFGR_SW_MSI /*!< MSI selection as system clock */ +#define RCC_SYSCLKSOURCE_HSI RCC_CFGR_SW_HSI /*!< HSI selection as system clock */ +#define RCC_SYSCLKSOURCE_HSE RCC_CFGR_SW_HSE /*!< HSE selection as system clock */ +#define RCC_SYSCLKSOURCE_PLLCLK RCC_CFGR_SW_PLL /*!< PLL selection as system clock */ +/** + * @} + */ + +/** @defgroup RCC_System_Clock_Source_Status System Clock Source Status + * @{ + */ +#define RCC_SYSCLKSOURCE_STATUS_MSI RCC_CFGR_SWS_MSI /*!< MSI used as system clock */ +#define RCC_SYSCLKSOURCE_STATUS_HSI RCC_CFGR_SWS_HSI /*!< HSI used as system clock */ +#define RCC_SYSCLKSOURCE_STATUS_HSE RCC_CFGR_SWS_HSE /*!< HSE used as system clock */ +#define RCC_SYSCLKSOURCE_STATUS_PLLCLK RCC_CFGR_SWS_PLL /*!< PLL used as system clock */ +/** + * @} + */ + +/** @defgroup RCC_AHB_Clock_Source AHB Clock Source + * @{ + */ +#define RCC_SYSCLK_DIV1 RCC_CFGR_HPRE_DIV1 /*!< SYSCLK not divided */ +#define RCC_SYSCLK_DIV2 RCC_CFGR_HPRE_DIV2 /*!< SYSCLK divided by 2 */ +#define RCC_SYSCLK_DIV4 RCC_CFGR_HPRE_DIV4 /*!< SYSCLK divided by 4 */ +#define RCC_SYSCLK_DIV8 RCC_CFGR_HPRE_DIV8 /*!< SYSCLK divided by 8 */ +#define RCC_SYSCLK_DIV16 RCC_CFGR_HPRE_DIV16 /*!< SYSCLK divided by 16 */ +#define RCC_SYSCLK_DIV64 RCC_CFGR_HPRE_DIV64 /*!< SYSCLK divided by 64 */ +#define RCC_SYSCLK_DIV128 RCC_CFGR_HPRE_DIV128 /*!< SYSCLK divided by 128 */ +#define RCC_SYSCLK_DIV256 RCC_CFGR_HPRE_DIV256 /*!< SYSCLK divided by 256 */ +#define RCC_SYSCLK_DIV512 RCC_CFGR_HPRE_DIV512 /*!< SYSCLK divided by 512 */ +/** + * @} + */ + +/** @defgroup RCC_APB1_APB2_Clock_Source APB1 APB2 Clock Source + * @{ + */ +#define RCC_HCLK_DIV1 RCC_CFGR_PPRE1_DIV1 /*!< HCLK not divided */ +#define RCC_HCLK_DIV2 RCC_CFGR_PPRE1_DIV2 /*!< HCLK divided by 2 */ +#define RCC_HCLK_DIV4 RCC_CFGR_PPRE1_DIV4 /*!< HCLK divided by 4 */ +#define RCC_HCLK_DIV8 RCC_CFGR_PPRE1_DIV8 /*!< HCLK divided by 8 */ +#define RCC_HCLK_DIV16 RCC_CFGR_PPRE1_DIV16 /*!< HCLK divided by 16 */ +/** + * @} + */ + +/** @defgroup RCC_RTC_Clock_Source RTC Clock Source + * @{ + */ +#define RCC_RTCCLKSOURCE_NONE 0x00000000U /*!< No clock used as RTC clock */ +#define RCC_RTCCLKSOURCE_LSE RCC_BDCR_RTCSEL_0 /*!< LSE oscillator clock used as RTC clock */ +#define RCC_RTCCLKSOURCE_LSI RCC_BDCR_RTCSEL_1 /*!< LSI oscillator clock used as RTC clock */ +#define RCC_RTCCLKSOURCE_HSE_DIV32 RCC_BDCR_RTCSEL /*!< HSE oscillator clock divided by 32 used as RTC clock */ +/** + * @} + */ + +/** @defgroup RCC_MCO_Index MCO Index + * @{ + */ +#define RCC_MCO1 0x00000000U +#define RCC_MCO RCC_MCO1 /*!< MCO1 to be compliant with other families with 2 MCOs*/ +/** + * @} + */ + +/** @defgroup RCC_MCO1_Clock_Source MCO1 Clock Source + * @{ + */ +#define RCC_MCO1SOURCE_NOCLOCK 0x00000000U /*!< MCO1 output disabled, no clock on MCO1 */ +#define RCC_MCO1SOURCE_SYSCLK RCC_CFGR_MCOSEL_0 /*!< SYSCLK selection as MCO1 source */ +#define RCC_MCO1SOURCE_MSI RCC_CFGR_MCOSEL_1 /*!< MSI selection as MCO1 source */ +#define RCC_MCO1SOURCE_HSI (RCC_CFGR_MCOSEL_0| RCC_CFGR_MCOSEL_1) /*!< HSI selection as MCO1 source */ +#define RCC_MCO1SOURCE_HSE RCC_CFGR_MCOSEL_2 /*!< HSE selection as MCO1 source */ +#define RCC_MCO1SOURCE_PLLCLK (RCC_CFGR_MCOSEL_0|RCC_CFGR_MCOSEL_2) /*!< PLLCLK selection as MCO1 source */ +#define RCC_MCO1SOURCE_LSI (RCC_CFGR_MCOSEL_1|RCC_CFGR_MCOSEL_2) /*!< LSI selection as MCO1 source */ +#define RCC_MCO1SOURCE_LSE (RCC_CFGR_MCOSEL_0|RCC_CFGR_MCOSEL_1|RCC_CFGR_MCOSEL_2) /*!< LSE selection as MCO1 source */ +#if defined(RCC_HSI48_SUPPORT) +#define RCC_MCO1SOURCE_HSI48 RCC_CFGR_MCOSEL_3 /*!< HSI48 selection as MCO1 source (STM32L43x/STM32L44x devices) */ +#endif /* RCC_HSI48_SUPPORT */ +/** + * @} + */ + +/** @defgroup RCC_MCOx_Clock_Prescaler MCO1 Clock Prescaler + * @{ + */ +#define RCC_MCODIV_1 RCC_CFGR_MCOPRE_DIV1 /*!< MCO not divided */ +#define RCC_MCODIV_2 RCC_CFGR_MCOPRE_DIV2 /*!< MCO divided by 2 */ +#define RCC_MCODIV_4 RCC_CFGR_MCOPRE_DIV4 /*!< MCO divided by 4 */ +#define RCC_MCODIV_8 RCC_CFGR_MCOPRE_DIV8 /*!< MCO divided by 8 */ +#define RCC_MCODIV_16 RCC_CFGR_MCOPRE_DIV16 /*!< MCO divided by 16 */ +/** + * @} + */ + +/** @defgroup RCC_Interrupt Interrupts + * @{ + */ +#define RCC_IT_LSIRDY RCC_CIFR_LSIRDYF /*!< LSI Ready Interrupt flag */ +#define RCC_IT_LSERDY RCC_CIFR_LSERDYF /*!< LSE Ready Interrupt flag */ +#define RCC_IT_MSIRDY RCC_CIFR_MSIRDYF /*!< MSI Ready Interrupt flag */ +#define RCC_IT_HSIRDY RCC_CIFR_HSIRDYF /*!< HSI16 Ready Interrupt flag */ +#define RCC_IT_HSERDY RCC_CIFR_HSERDYF /*!< HSE Ready Interrupt flag */ +#define RCC_IT_PLLRDY RCC_CIFR_PLLRDYF /*!< PLL Ready Interrupt flag */ +#if defined(RCC_PLLSAI1_SUPPORT) +#define RCC_IT_PLLSAI1RDY RCC_CIFR_PLLSAI1RDYF /*!< PLLSAI1 Ready Interrupt flag */ +#endif /* RCC_PLLSAI1_SUPPORT */ +#if defined(RCC_PLLSAI2_SUPPORT) +#define RCC_IT_PLLSAI2RDY RCC_CIFR_PLLSAI2RDYF /*!< PLLSAI2 Ready Interrupt flag */ +#endif /* RCC_PLLSAI2_SUPPORT */ +#define RCC_IT_CSS RCC_CIFR_CSSF /*!< Clock Security System Interrupt flag */ +#define RCC_IT_LSECSS RCC_CIFR_LSECSSF /*!< LSE Clock Security System Interrupt flag */ +#if defined(RCC_HSI48_SUPPORT) +#define RCC_IT_HSI48RDY RCC_CIFR_HSI48RDYF /*!< HSI48 Ready Interrupt flag */ +#endif /* RCC_HSI48_SUPPORT */ +/** + * @} + */ + +/** @defgroup RCC_Flag Flags + * Elements values convention: XXXYYYYYb + * - YYYYY : Flag position in the register + * - XXX : Register index + * - 001: CR register + * - 010: BDCR register + * - 011: CSR register + * - 100: CRRCR register + * @{ + */ +/* Flags in the CR register */ +#define RCC_FLAG_MSIRDY ((CR_REG_INDEX << 5U) | RCC_CR_MSIRDY_Pos) /*!< MSI Ready flag */ +#define RCC_FLAG_HSIRDY ((CR_REG_INDEX << 5U) | RCC_CR_HSIRDY_Pos) /*!< HSI Ready flag */ +#define RCC_FLAG_HSERDY ((CR_REG_INDEX << 5U) | RCC_CR_HSERDY_Pos) /*!< HSE Ready flag */ +#define RCC_FLAG_PLLRDY ((CR_REG_INDEX << 5U) | RCC_CR_PLLRDY_Pos) /*!< PLL Ready flag */ +#if defined(RCC_PLLSAI1_SUPPORT) +#define RCC_FLAG_PLLSAI1RDY ((CR_REG_INDEX << 5U) | RCC_CR_PLLSAI1RDY_Pos) /*!< PLLSAI1 Ready flag */ +#endif /* RCC_PLLSAI1_SUPPORT */ +#if defined(RCC_PLLSAI2_SUPPORT) +#define RCC_FLAG_PLLSAI2RDY ((CR_REG_INDEX << 5U) | RCC_CR_PLLSAI2RDY_Pos) /*!< PLLSAI2 Ready flag */ +#endif /* RCC_PLLSAI2_SUPPORT */ + +/* Flags in the BDCR register */ +#define RCC_FLAG_LSERDY ((BDCR_REG_INDEX << 5U) | RCC_BDCR_LSERDY_Pos) /*!< LSE Ready flag */ +#define RCC_FLAG_LSECSSD ((BDCR_REG_INDEX << 5U) | RCC_BDCR_LSECSSD_Pos) /*!< LSE Clock Security System Interrupt flag */ + +/* Flags in the CSR register */ +#define RCC_FLAG_LSIRDY ((CSR_REG_INDEX << 5U) | RCC_CSR_LSIRDY_Pos) /*!< LSI Ready flag */ +#define RCC_FLAG_FWRST ((CSR_REG_INDEX << 5U) | RCC_CSR_FWRSTF_Pos) /*!< Firewall reset flag */ +#define RCC_FLAG_OBLRST ((CSR_REG_INDEX << 5U) | RCC_CSR_OBLRSTF_Pos) /*!< Option Byte Loader reset flag */ +#define RCC_FLAG_PINRST ((CSR_REG_INDEX << 5U) | RCC_CSR_PINRSTF_Pos) /*!< PIN reset flag */ +#define RCC_FLAG_BORRST ((CSR_REG_INDEX << 5U) | RCC_CSR_BORRSTF_Pos) /*!< BOR reset flag */ +#define RCC_FLAG_SFTRST ((CSR_REG_INDEX << 5U) | RCC_CSR_SFTRSTF_Pos) /*!< Software Reset flag */ +#define RCC_FLAG_IWDGRST ((CSR_REG_INDEX << 5U) | RCC_CSR_IWDGRSTF_Pos) /*!< Independent Watchdog reset flag */ +#define RCC_FLAG_WWDGRST ((CSR_REG_INDEX << 5U) | RCC_CSR_WWDGRSTF_Pos) /*!< Window watchdog reset flag */ +#define RCC_FLAG_LPWRRST ((CSR_REG_INDEX << 5U) | RCC_CSR_LPWRRSTF_Pos) /*!< Low-Power reset flag */ + +#if defined(RCC_HSI48_SUPPORT) +/* Flags in the CRRCR register */ +#define RCC_FLAG_HSI48RDY ((CRRCR_REG_INDEX << 5U) | RCC_CRRCR_HSI48RDY_Pos) /*!< HSI48 Ready flag */ +#endif /* RCC_HSI48_SUPPORT */ +/** + * @} + */ + +/** @defgroup RCC_LSEDrive_Config LSE Drive Config + * @{ + */ +#define RCC_LSEDRIVE_LOW 0x00000000U /*!< LSE low drive capability */ +#define RCC_LSEDRIVE_MEDIUMLOW RCC_BDCR_LSEDRV_0 /*!< LSE medium low drive capability */ +#define RCC_LSEDRIVE_MEDIUMHIGH RCC_BDCR_LSEDRV_1 /*!< LSE medium high drive capability */ +#define RCC_LSEDRIVE_HIGH RCC_BDCR_LSEDRV /*!< LSE high drive capability */ +/** + * @} + */ + +/** @defgroup RCC_Stop_WakeUpClock Wake-Up from STOP Clock + * @{ + */ +#define RCC_STOP_WAKEUPCLOCK_MSI 0x00000000U /*!< MSI selection after wake-up from STOP */ +#define RCC_STOP_WAKEUPCLOCK_HSI RCC_CFGR_STOPWUCK /*!< HSI selection after wake-up from STOP */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ + +/** @defgroup RCC_Exported_Macros RCC Exported Macros + * @{ + */ + +/** @defgroup RCC_AHB1_Peripheral_Clock_Enable_Disable AHB1 Peripheral Clock Enable Disable + * @brief Enable or disable the AHB1 peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ + +#define __HAL_RCC_DMA1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_DMA1EN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_DMA1EN); \ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_DMA2_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_DMA2EN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_DMA2EN); \ + UNUSED(tmpreg); \ + } while(0) + +#if defined(DMAMUX1) +#define __HAL_RCC_DMAMUX1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_DMAMUX1EN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_DMAMUX1EN); \ + UNUSED(tmpreg); \ + } while(0) +#endif /* DMAMUX1 */ + +#define __HAL_RCC_FLASH_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_FLASHEN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_FLASHEN); \ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_CRC_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CRCEN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CRCEN); \ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_TSC_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_TSCEN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_TSCEN); \ + UNUSED(tmpreg); \ + } while(0) + +#if defined(DMA2D) +#define __HAL_RCC_DMA2D_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_DMA2DEN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_DMA2DEN); \ + UNUSED(tmpreg); \ + } while(0) +#endif /* DMA2D */ + +#if defined(GFXMMU) +#define __HAL_RCC_GFXMMU_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GFXMMUEN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GFXMMUEN); \ + UNUSED(tmpreg); \ + } while(0) +#endif /* GFXMMU */ + + +#define __HAL_RCC_DMA1_CLK_DISABLE() CLEAR_BIT(RCC->AHB1ENR, RCC_AHB1ENR_DMA1EN) + +#define __HAL_RCC_DMA2_CLK_DISABLE() CLEAR_BIT(RCC->AHB1ENR, RCC_AHB1ENR_DMA2EN) + +#if defined(DMAMUX1) +#define __HAL_RCC_DMAMUX1_CLK_DISABLE() CLEAR_BIT(RCC->AHB1ENR, RCC_AHB1ENR_DMAMUX1EN) +#endif /* DMAMUX1 */ + +#define __HAL_RCC_FLASH_CLK_DISABLE() CLEAR_BIT(RCC->AHB1ENR, RCC_AHB1ENR_FLASHEN) + +#define __HAL_RCC_CRC_CLK_DISABLE() CLEAR_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CRCEN) + +#define __HAL_RCC_TSC_CLK_DISABLE() CLEAR_BIT(RCC->AHB1ENR, RCC_AHB1ENR_TSCEN) + +#if defined(DMA2D) +#define __HAL_RCC_DMA2D_CLK_DISABLE() CLEAR_BIT(RCC->AHB1ENR, RCC_AHB1ENR_DMA2DEN) +#endif /* DMA2D */ + +#if defined(GFXMMU) +#define __HAL_RCC_GFXMMU_CLK_DISABLE() CLEAR_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GFXMMUEN) +#endif /* GFXMMU */ + +/** + * @} + */ + +/** @defgroup RCC_AHB2_Peripheral_Clock_Enable_Disable AHB2 Peripheral Clock Enable Disable + * @brief Enable or disable the AHB2 peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ + +#define __HAL_RCC_GPIOA_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_GPIOAEN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_GPIOAEN); \ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_GPIOB_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_GPIOBEN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_GPIOBEN); \ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_GPIOC_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_GPIOCEN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_GPIOCEN); \ + UNUSED(tmpreg); \ + } while(0) + +#if defined(GPIOD) +#define __HAL_RCC_GPIOD_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_GPIODEN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_GPIODEN); \ + UNUSED(tmpreg); \ + } while(0) +#endif /* GPIOD */ + +#if defined(GPIOE) +#define __HAL_RCC_GPIOE_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_GPIOEEN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_GPIOEEN); \ + UNUSED(tmpreg); \ + } while(0) +#endif /* GPIOE */ + +#if defined(GPIOF) +#define __HAL_RCC_GPIOF_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_GPIOFEN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_GPIOFEN); \ + UNUSED(tmpreg); \ + } while(0) +#endif /* GPIOF */ + +#if defined(GPIOG) +#define __HAL_RCC_GPIOG_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_GPIOGEN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_GPIOGEN); \ + UNUSED(tmpreg); \ + } while(0) +#endif /* GPIOG */ + +#define __HAL_RCC_GPIOH_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_GPIOHEN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_GPIOHEN); \ + UNUSED(tmpreg); \ + } while(0) + +#if defined(GPIOI) +#define __HAL_RCC_GPIOI_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_GPIOIEN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_GPIOIEN); \ + UNUSED(tmpreg); \ + } while(0) +#endif /* GPIOI */ + +#if defined(USB_OTG_FS) +#define __HAL_RCC_USB_OTG_FS_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_OTGFSEN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_OTGFSEN); \ + UNUSED(tmpreg); \ + } while(0) +#endif /* USB_OTG_FS */ + +#define __HAL_RCC_ADC_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_ADCEN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_ADCEN); \ + UNUSED(tmpreg); \ + } while(0) + +#if defined(DCMI) +#define __HAL_RCC_DCMI_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_DCMIEN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_DCMIEN); \ + UNUSED(tmpreg); \ + } while(0) +#endif /* DCMI */ + +#if defined(PKA) +#define __HAL_RCC_PKA_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_PKAEN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_PKAEN); \ + UNUSED(tmpreg); \ + } while(0) +#endif /* PKA */ + +#if defined(AES) +#define __HAL_RCC_AES_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_AESEN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_AESEN); \ + UNUSED(tmpreg); \ + } while(0) +#endif /* AES */ + +#if defined(HASH) +#define __HAL_RCC_HASH_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_HASHEN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_HASHEN); \ + UNUSED(tmpreg); \ + } while(0) +#endif /* HASH */ + +#define __HAL_RCC_RNG_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_RNGEN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_RNGEN); \ + UNUSED(tmpreg); \ + } while(0) + +#if defined(OCTOSPIM) +#define __HAL_RCC_OSPIM_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_OSPIMEN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_OSPIMEN); \ + UNUSED(tmpreg); \ + } while(0) +#endif /* OCTOSPIM */ + +#if defined(SDMMC1) && defined(RCC_AHB2ENR_SDMMC1EN) +#define __HAL_RCC_SDMMC1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_SDMMC1EN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_SDMMC1EN); \ + UNUSED(tmpreg); \ + } while(0) +#endif /* SDMMC1 && RCC_AHB2ENR_SDMMC1EN */ + +#if defined(SDMMC2) +#define __HAL_RCC_SDMMC2_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_SDMMC2EN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_SDMMC2EN); \ + UNUSED(tmpreg); \ + } while(0) +#endif /* SDMMC2 */ + + +#define __HAL_RCC_GPIOA_CLK_DISABLE() CLEAR_BIT(RCC->AHB2ENR, RCC_AHB2ENR_GPIOAEN) + +#define __HAL_RCC_GPIOB_CLK_DISABLE() CLEAR_BIT(RCC->AHB2ENR, RCC_AHB2ENR_GPIOBEN) + +#define __HAL_RCC_GPIOC_CLK_DISABLE() CLEAR_BIT(RCC->AHB2ENR, RCC_AHB2ENR_GPIOCEN) + +#if defined(GPIOD) +#define __HAL_RCC_GPIOD_CLK_DISABLE() CLEAR_BIT(RCC->AHB2ENR, RCC_AHB2ENR_GPIODEN) +#endif /* GPIOD */ + +#if defined(GPIOE) +#define __HAL_RCC_GPIOE_CLK_DISABLE() CLEAR_BIT(RCC->AHB2ENR, RCC_AHB2ENR_GPIOEEN) +#endif /* GPIOE */ + +#if defined(GPIOF) +#define __HAL_RCC_GPIOF_CLK_DISABLE() CLEAR_BIT(RCC->AHB2ENR, RCC_AHB2ENR_GPIOFEN) +#endif /* GPIOF */ + +#if defined(GPIOG) +#define __HAL_RCC_GPIOG_CLK_DISABLE() CLEAR_BIT(RCC->AHB2ENR, RCC_AHB2ENR_GPIOGEN) +#endif /* GPIOG */ + +#define __HAL_RCC_GPIOH_CLK_DISABLE() CLEAR_BIT(RCC->AHB2ENR, RCC_AHB2ENR_GPIOHEN) + +#if defined(GPIOI) +#define __HAL_RCC_GPIOI_CLK_DISABLE() CLEAR_BIT(RCC->AHB2ENR, RCC_AHB2ENR_GPIOIEN) +#endif /* GPIOI */ + +#if defined(USB_OTG_FS) +#define __HAL_RCC_USB_OTG_FS_CLK_DISABLE() CLEAR_BIT(RCC->AHB2ENR, RCC_AHB2ENR_OTGFSEN); +#endif /* USB_OTG_FS */ + +#define __HAL_RCC_ADC_CLK_DISABLE() CLEAR_BIT(RCC->AHB2ENR, RCC_AHB2ENR_ADCEN) + +#if defined(DCMI) +#define __HAL_RCC_DCMI_CLK_DISABLE() CLEAR_BIT(RCC->AHB2ENR, RCC_AHB2ENR_DCMIEN) +#endif /* DCMI */ + +#if defined(PKA) +#define __HAL_RCC_PKA_CLK_DISABLE() CLEAR_BIT(RCC->AHB2ENR, RCC_AHB2ENR_PKAEN) +#endif /* PKA */ + +#if defined(AES) +#define __HAL_RCC_AES_CLK_DISABLE() CLEAR_BIT(RCC->AHB2ENR, RCC_AHB2ENR_AESEN); +#endif /* AES */ + +#if defined(HASH) +#define __HAL_RCC_HASH_CLK_DISABLE() CLEAR_BIT(RCC->AHB2ENR, RCC_AHB2ENR_HASHEN) +#endif /* HASH */ + +#define __HAL_RCC_RNG_CLK_DISABLE() CLEAR_BIT(RCC->AHB2ENR, RCC_AHB2ENR_RNGEN) + +#if defined(OCTOSPIM) +#define __HAL_RCC_OSPIM_CLK_DISABLE() CLEAR_BIT(RCC->AHB2ENR, RCC_AHB2ENR_OSPIMEN) +#endif /* OCTOSPIM */ + +#if defined(SDMMC1) && defined(RCC_AHB2ENR_SDMMC1EN) +#define __HAL_RCC_SDMMC1_CLK_DISABLE() CLEAR_BIT(RCC->AHB2ENR, RCC_AHB2ENR_SDMMC1EN) +#endif /* SDMMC1 && RCC_AHB2ENR_SDMMC1EN */ + +#if defined(SDMMC2) +#define __HAL_RCC_SDMMC2_CLK_DISABLE() CLEAR_BIT(RCC->AHB2ENR, RCC_AHB2ENR_SDMMC2EN) +#endif /* SDMMC2 */ + +/** + * @} + */ + +/** @defgroup RCC_AHB3_Clock_Enable_Disable AHB3 Peripheral Clock Enable Disable + * @brief Enable or disable the AHB3 peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ + +#if defined(FMC_BANK1) +#define __HAL_RCC_FMC_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN); \ + UNUSED(tmpreg); \ + } while(0) +#endif /* FMC_BANK1 */ + +#if defined(QUADSPI) +#define __HAL_RCC_QSPI_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB3ENR, RCC_AHB3ENR_QSPIEN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_QSPIEN); \ + UNUSED(tmpreg); \ + } while(0) +#endif /* QUADSPI */ + +#if defined(OCTOSPI1) +#define __HAL_RCC_OSPI1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB3ENR, RCC_AHB3ENR_OSPI1EN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_OSPI1EN); \ + UNUSED(tmpreg); \ + } while(0) +#endif /* OCTOSPI1 */ + +#if defined(OCTOSPI2) +#define __HAL_RCC_OSPI2_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB3ENR, RCC_AHB3ENR_OSPI2EN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_OSPI2EN); \ + UNUSED(tmpreg); \ + } while(0) +#endif /* OCTOSPI2 */ + +#if defined(FMC_BANK1) +#define __HAL_RCC_FMC_CLK_DISABLE() CLEAR_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN) +#endif /* FMC_BANK1 */ + +#if defined(QUADSPI) +#define __HAL_RCC_QSPI_CLK_DISABLE() CLEAR_BIT(RCC->AHB3ENR, RCC_AHB3ENR_QSPIEN) +#endif /* QUADSPI */ + +#if defined(OCTOSPI1) +#define __HAL_RCC_OSPI1_CLK_DISABLE() CLEAR_BIT(RCC->AHB3ENR, RCC_AHB3ENR_OSPI1EN) +#endif /* OCTOSPI1 */ + +#if defined(OCTOSPI2) +#define __HAL_RCC_OSPI2_CLK_DISABLE() CLEAR_BIT(RCC->AHB3ENR, RCC_AHB3ENR_OSPI2EN) +#endif /* OCTOSPI2 */ + +/** + * @} + */ + +/** @defgroup RCC_APB1_Clock_Enable_Disable APB1 Peripheral Clock Enable Disable + * @brief Enable or disable the APB1 peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ + +#define __HAL_RCC_TIM2_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR1, RCC_APB1ENR1_TIM2EN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_TIM2EN); \ + UNUSED(tmpreg); \ + } while(0) + +#if defined(TIM3) +#define __HAL_RCC_TIM3_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR1, RCC_APB1ENR1_TIM3EN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_TIM3EN); \ + UNUSED(tmpreg); \ + } while(0) +#endif /* TIM3 */ + +#if defined(TIM4) +#define __HAL_RCC_TIM4_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR1, RCC_APB1ENR1_TIM4EN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_TIM4EN); \ + UNUSED(tmpreg); \ + } while(0) +#endif /* TIM4 */ + +#if defined(TIM5) +#define __HAL_RCC_TIM5_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR1, RCC_APB1ENR1_TIM5EN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_TIM5EN); \ + UNUSED(tmpreg); \ + } while(0) +#endif /* TIM5 */ + +#define __HAL_RCC_TIM6_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR1, RCC_APB1ENR1_TIM6EN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_TIM6EN); \ + UNUSED(tmpreg); \ + } while(0) + +#if defined(TIM7) +#define __HAL_RCC_TIM7_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR1, RCC_APB1ENR1_TIM7EN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_TIM7EN); \ + UNUSED(tmpreg); \ + } while(0) +#endif /* TIM7 */ + +#if defined(LCD) +#define __HAL_RCC_LCD_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR1, RCC_APB1ENR1_LCDEN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_LCDEN); \ + UNUSED(tmpreg); \ + } while(0) +#endif /* LCD */ + +#if defined(RCC_APB1ENR1_RTCAPBEN) +#define __HAL_RCC_RTCAPB_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR1, RCC_APB1ENR1_RTCAPBEN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_RTCAPBEN); \ + UNUSED(tmpreg); \ + } while(0) +#endif /* RCC_APB1ENR1_RTCAPBEN */ + +#define __HAL_RCC_WWDG_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR1, RCC_APB1ENR1_WWDGEN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_WWDGEN); \ + UNUSED(tmpreg); \ + } while(0) + +#if defined(SPI2) +#define __HAL_RCC_SPI2_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR1, RCC_APB1ENR1_SPI2EN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_SPI2EN); \ + UNUSED(tmpreg); \ + } while(0) +#endif /* SPI2 */ + +#if defined(SPI3) +#define __HAL_RCC_SPI3_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR1, RCC_APB1ENR1_SPI3EN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_SPI3EN); \ + UNUSED(tmpreg); \ + } while(0) +#endif /* SPI3 */ + +#define __HAL_RCC_USART2_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR1, RCC_APB1ENR1_USART2EN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_USART2EN); \ + UNUSED(tmpreg); \ + } while(0) + +#if defined(USART3) +#define __HAL_RCC_USART3_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR1, RCC_APB1ENR1_USART3EN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_USART3EN); \ + UNUSED(tmpreg); \ + } while(0) +#endif /* USART3 */ + +#if defined(UART4) +#define __HAL_RCC_UART4_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR1, RCC_APB1ENR1_UART4EN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_UART4EN); \ + UNUSED(tmpreg); \ + } while(0) +#endif /* UART4 */ + +#if defined(UART5) +#define __HAL_RCC_UART5_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR1, RCC_APB1ENR1_UART5EN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_UART5EN); \ + UNUSED(tmpreg); \ + } while(0) +#endif /* UART5 */ + +#define __HAL_RCC_I2C1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR1, RCC_APB1ENR1_I2C1EN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_I2C1EN); \ + UNUSED(tmpreg); \ + } while(0) + +#if defined(I2C2) +#define __HAL_RCC_I2C2_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR1, RCC_APB1ENR1_I2C2EN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_I2C2EN); \ + UNUSED(tmpreg); \ + } while(0) +#endif /* I2C2 */ + +#define __HAL_RCC_I2C3_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR1, RCC_APB1ENR1_I2C3EN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_I2C3EN); \ + UNUSED(tmpreg); \ + } while(0) + +#if defined(I2C4) +#define __HAL_RCC_I2C4_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR2, RCC_APB1ENR2_I2C4EN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR2, RCC_APB1ENR2_I2C4EN); \ + UNUSED(tmpreg); \ + } while(0) +#endif /* I2C4 */ + +#if defined(CRS) +#define __HAL_RCC_CRS_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR1, RCC_APB1ENR1_CRSEN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_CRSEN); \ + UNUSED(tmpreg); \ + } while(0) +#endif /* CRS */ + +#if defined(CAN1) +#define __HAL_RCC_CAN1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR1, RCC_APB1ENR1_CAN1EN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_CAN1EN); \ + UNUSED(tmpreg); \ + } while(0) +#endif /* CAN1 */ + +#if defined(CAN2) +#define __HAL_RCC_CAN2_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR1, RCC_APB1ENR1_CAN2EN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_CAN2EN); \ + UNUSED(tmpreg); \ + } while(0) +#endif /* CAN2 */ + +#if defined(USB) +#define __HAL_RCC_USB_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR1, RCC_APB1ENR1_USBFSEN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_USBFSEN); \ + UNUSED(tmpreg); \ + } while(0) +#endif /* USB */ + +#define __HAL_RCC_PWR_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR1, RCC_APB1ENR1_PWREN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_PWREN); \ + UNUSED(tmpreg); \ + } while(0) + +#if defined(DAC1) +#define __HAL_RCC_DAC1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR1, RCC_APB1ENR1_DAC1EN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_DAC1EN); \ + UNUSED(tmpreg); \ + } while(0) +#endif /* DAC1 */ + +#define __HAL_RCC_OPAMP_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR1, RCC_APB1ENR1_OPAMPEN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_OPAMPEN); \ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_LPTIM1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR1, RCC_APB1ENR1_LPTIM1EN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_LPTIM1EN); \ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_LPUART1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR2, RCC_APB1ENR2_LPUART1EN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR2, RCC_APB1ENR2_LPUART1EN); \ + UNUSED(tmpreg); \ + } while(0) + +#if defined(SWPMI1) +#define __HAL_RCC_SWPMI1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR2, RCC_APB1ENR2_SWPMI1EN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR2, RCC_APB1ENR2_SWPMI1EN); \ + UNUSED(tmpreg); \ + } while(0) +#endif /* SWPMI1 */ + +#define __HAL_RCC_LPTIM2_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR2, RCC_APB1ENR2_LPTIM2EN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR2, RCC_APB1ENR2_LPTIM2EN); \ + UNUSED(tmpreg); \ + } while(0) + + +#define __HAL_RCC_TIM2_CLK_DISABLE() CLEAR_BIT(RCC->APB1ENR1, RCC_APB1ENR1_TIM2EN) + +#if defined(TIM3) +#define __HAL_RCC_TIM3_CLK_DISABLE() CLEAR_BIT(RCC->APB1ENR1, RCC_APB1ENR1_TIM3EN) +#endif /* TIM3 */ + +#if defined(TIM4) +#define __HAL_RCC_TIM4_CLK_DISABLE() CLEAR_BIT(RCC->APB1ENR1, RCC_APB1ENR1_TIM4EN) +#endif /* TIM4 */ + +#if defined(TIM5) +#define __HAL_RCC_TIM5_CLK_DISABLE() CLEAR_BIT(RCC->APB1ENR1, RCC_APB1ENR1_TIM5EN) +#endif /* TIM5 */ + +#define __HAL_RCC_TIM6_CLK_DISABLE() CLEAR_BIT(RCC->APB1ENR1, RCC_APB1ENR1_TIM6EN) + +#if defined(TIM7) +#define __HAL_RCC_TIM7_CLK_DISABLE() CLEAR_BIT(RCC->APB1ENR1, RCC_APB1ENR1_TIM7EN) +#endif /* TIM7 */ + +#if defined(LCD) +#define __HAL_RCC_LCD_CLK_DISABLE() CLEAR_BIT(RCC->APB1ENR1, RCC_APB1ENR1_LCDEN); +#endif /* LCD */ + +#if defined(RCC_APB1ENR1_RTCAPBEN) +#define __HAL_RCC_RTCAPB_CLK_DISABLE() CLEAR_BIT(RCC->APB1ENR1, RCC_APB1ENR1_RTCAPBEN); +#endif /* RCC_APB1ENR1_RTCAPBEN */ + +#if defined(SPI2) +#define __HAL_RCC_SPI2_CLK_DISABLE() CLEAR_BIT(RCC->APB1ENR1, RCC_APB1ENR1_SPI2EN) +#endif /* SPI2 */ + +#if defined(SPI3) +#define __HAL_RCC_SPI3_CLK_DISABLE() CLEAR_BIT(RCC->APB1ENR1, RCC_APB1ENR1_SPI3EN) +#endif /* SPI3 */ + +#define __HAL_RCC_USART2_CLK_DISABLE() CLEAR_BIT(RCC->APB1ENR1, RCC_APB1ENR1_USART2EN) + +#if defined(USART3) +#define __HAL_RCC_USART3_CLK_DISABLE() CLEAR_BIT(RCC->APB1ENR1, RCC_APB1ENR1_USART3EN) +#endif /* USART3 */ + +#if defined(UART4) +#define __HAL_RCC_UART4_CLK_DISABLE() CLEAR_BIT(RCC->APB1ENR1, RCC_APB1ENR1_UART4EN) +#endif /* UART4 */ + +#if defined(UART5) +#define __HAL_RCC_UART5_CLK_DISABLE() CLEAR_BIT(RCC->APB1ENR1, RCC_APB1ENR1_UART5EN) +#endif /* UART5 */ + +#define __HAL_RCC_I2C1_CLK_DISABLE() CLEAR_BIT(RCC->APB1ENR1, RCC_APB1ENR1_I2C1EN) + +#if defined(I2C2) +#define __HAL_RCC_I2C2_CLK_DISABLE() CLEAR_BIT(RCC->APB1ENR1, RCC_APB1ENR1_I2C2EN) +#endif /* I2C2 */ + +#define __HAL_RCC_I2C3_CLK_DISABLE() CLEAR_BIT(RCC->APB1ENR1, RCC_APB1ENR1_I2C3EN) + +#if defined(I2C4) +#define __HAL_RCC_I2C4_CLK_DISABLE() CLEAR_BIT(RCC->APB1ENR2, RCC_APB1ENR2_I2C4EN) +#endif /* I2C4 */ + +#if defined(CRS) +#define __HAL_RCC_CRS_CLK_DISABLE() CLEAR_BIT(RCC->APB1ENR1, RCC_APB1ENR1_CRSEN); +#endif /* CRS */ + +#if defined(CAN1) +#define __HAL_RCC_CAN1_CLK_DISABLE() CLEAR_BIT(RCC->APB1ENR1, RCC_APB1ENR1_CAN1EN) +#endif /* CAN1 */ + +#if defined(CAN2) +#define __HAL_RCC_CAN2_CLK_DISABLE() CLEAR_BIT(RCC->APB1ENR1, RCC_APB1ENR1_CAN2EN) +#endif /* CAN2 */ + +#if defined(USB) +#define __HAL_RCC_USB_CLK_DISABLE() CLEAR_BIT(RCC->APB1ENR1, RCC_APB1ENR1_USBFSEN); +#endif /* USB */ + +#define __HAL_RCC_PWR_CLK_DISABLE() CLEAR_BIT(RCC->APB1ENR1, RCC_APB1ENR1_PWREN) + +#if defined(DAC1) +#define __HAL_RCC_DAC1_CLK_DISABLE() CLEAR_BIT(RCC->APB1ENR1, RCC_APB1ENR1_DAC1EN) +#endif /* DAC1 */ + +#define __HAL_RCC_OPAMP_CLK_DISABLE() CLEAR_BIT(RCC->APB1ENR1, RCC_APB1ENR1_OPAMPEN) + +#define __HAL_RCC_LPTIM1_CLK_DISABLE() CLEAR_BIT(RCC->APB1ENR1, RCC_APB1ENR1_LPTIM1EN) + +#define __HAL_RCC_LPUART1_CLK_DISABLE() CLEAR_BIT(RCC->APB1ENR2, RCC_APB1ENR2_LPUART1EN) + +#if defined(SWPMI1) +#define __HAL_RCC_SWPMI1_CLK_DISABLE() CLEAR_BIT(RCC->APB1ENR2, RCC_APB1ENR2_SWPMI1EN) +#endif /* SWPMI1 */ + +#define __HAL_RCC_LPTIM2_CLK_DISABLE() CLEAR_BIT(RCC->APB1ENR2, RCC_APB1ENR2_LPTIM2EN) + +/** + * @} + */ + +/** @defgroup RCC_APB2_Clock_Enable_Disable APB2 Peripheral Clock Enable Disable + * @brief Enable or disable the APB2 peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ + +#define __HAL_RCC_SYSCFG_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SYSCFGEN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SYSCFGEN); \ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_FIREWALL_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_FWEN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_FWEN); \ + UNUSED(tmpreg); \ + } while(0) + +#if defined(SDMMC1) && defined(RCC_APB2ENR_SDMMC1EN) +#define __HAL_RCC_SDMMC1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SDMMC1EN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SDMMC1EN); \ + UNUSED(tmpreg); \ + } while(0) +#endif /* SDMMC1 && RCC_APB2ENR_SDMMC1EN */ + +#define __HAL_RCC_TIM1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM1EN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM1EN); \ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_SPI1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI1EN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI1EN); \ + UNUSED(tmpreg); \ + } while(0) + +#if defined(TIM8) +#define __HAL_RCC_TIM8_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM8EN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM8EN); \ + UNUSED(tmpreg); \ + } while(0) +#endif /* TIM8 */ + +#define __HAL_RCC_USART1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_USART1EN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_USART1EN); \ + UNUSED(tmpreg); \ + } while(0) + + +#define __HAL_RCC_TIM15_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM15EN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM15EN); \ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_TIM16_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM16EN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM16EN); \ + UNUSED(tmpreg); \ + } while(0) + +#if defined(TIM17) +#define __HAL_RCC_TIM17_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM17EN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM17EN); \ + UNUSED(tmpreg); \ + } while(0) +#endif /* TIM17 */ + +#if defined(SAI1) +#define __HAL_RCC_SAI1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SAI1EN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SAI1EN); \ + UNUSED(tmpreg); \ + } while(0) +#endif /* SAI1 */ + +#if defined(SAI2) +#define __HAL_RCC_SAI2_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SAI2EN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SAI2EN); \ + UNUSED(tmpreg); \ + } while(0) +#endif /* SAI2 */ + +#if defined(DFSDM1_Filter0) +#define __HAL_RCC_DFSDM1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_DFSDM1EN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_DFSDM1EN); \ + UNUSED(tmpreg); \ + } while(0) +#endif /* DFSDM1_Filter0 */ + +#if defined(LTDC) +#define __HAL_RCC_LTDC_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_LTDCEN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_LTDCEN); \ + UNUSED(tmpreg); \ + } while(0) +#endif /* LTDC */ + +#if defined(DSI) +#define __HAL_RCC_DSI_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_DSIEN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_DSIEN); \ + UNUSED(tmpreg); \ + } while(0) +#endif /* DSI */ + + +#define __HAL_RCC_SYSCFG_CLK_DISABLE() CLEAR_BIT(RCC->APB2ENR, RCC_APB2ENR_SYSCFGEN) + +#if defined(SDMMC1) && defined(RCC_APB2ENR_SDMMC1EN) +#define __HAL_RCC_SDMMC1_CLK_DISABLE() CLEAR_BIT(RCC->APB2ENR, RCC_APB2ENR_SDMMC1EN) +#endif /* SDMMC1 && RCC_APB2ENR_SDMMC1EN */ + +#define __HAL_RCC_TIM1_CLK_DISABLE() CLEAR_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM1EN) + +#define __HAL_RCC_SPI1_CLK_DISABLE() CLEAR_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI1EN) + +#if defined(TIM8) +#define __HAL_RCC_TIM8_CLK_DISABLE() CLEAR_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM8EN) +#endif /* TIM8 */ + +#define __HAL_RCC_USART1_CLK_DISABLE() CLEAR_BIT(RCC->APB2ENR, RCC_APB2ENR_USART1EN) + +#define __HAL_RCC_TIM15_CLK_DISABLE() CLEAR_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM15EN) + +#define __HAL_RCC_TIM16_CLK_DISABLE() CLEAR_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM16EN) + +#if defined(TIM17) +#define __HAL_RCC_TIM17_CLK_DISABLE() CLEAR_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM17EN) +#endif /* TIM17 */ + +#if defined(SAI1) +#define __HAL_RCC_SAI1_CLK_DISABLE() CLEAR_BIT(RCC->APB2ENR, RCC_APB2ENR_SAI1EN) +#endif /* SAI1 */ + +#if defined(SAI2) +#define __HAL_RCC_SAI2_CLK_DISABLE() CLEAR_BIT(RCC->APB2ENR, RCC_APB2ENR_SAI2EN) +#endif /* SAI2 */ + +#if defined(DFSDM1_Filter0) +#define __HAL_RCC_DFSDM1_CLK_DISABLE() CLEAR_BIT(RCC->APB2ENR, RCC_APB2ENR_DFSDM1EN) +#endif /* DFSDM1_Filter0 */ + +#if defined(LTDC) +#define __HAL_RCC_LTDC_CLK_DISABLE() CLEAR_BIT(RCC->APB2ENR, RCC_APB2ENR_LTDCEN) +#endif /* LTDC */ + +#if defined(DSI) +#define __HAL_RCC_DSI_CLK_DISABLE() CLEAR_BIT(RCC->APB2ENR, RCC_APB2ENR_DSIEN) +#endif /* DSI */ + +/** + * @} + */ + +/** @defgroup RCC_AHB1_Peripheral_Clock_Enable_Disable_Status AHB1 Peripheral Clock Enabled or Disabled Status + * @brief Check whether the AHB1 peripheral clock is enabled or not. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ + +#define __HAL_RCC_DMA1_IS_CLK_ENABLED() (READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_DMA1EN) != 0U) + +#define __HAL_RCC_DMA2_IS_CLK_ENABLED() (READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_DMA2EN) != 0U) + +#if defined(DMAMUX1) +#define __HAL_RCC_DMAMUX1_IS_CLK_ENABLED() (READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_DMAMUX1EN) != 0U) +#endif /* DMAMUX1 */ + +#define __HAL_RCC_FLASH_IS_CLK_ENABLED() (READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_FLASHEN) != 0U) + +#define __HAL_RCC_CRC_IS_CLK_ENABLED() (READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CRCEN) != 0U) + +#define __HAL_RCC_TSC_IS_CLK_ENABLED() (READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_TSCEN) != 0U) + +#if defined(DMA2D) +#define __HAL_RCC_DMA2D_IS_CLK_ENABLED() (READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_DMA2DEN) != 0U) +#endif /* DMA2D */ + +#if defined(GFXMMU) +#define __HAL_RCC_GFXMMU_IS_CLK_ENABLED() (READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GFXMMUEN) != 0U) +#endif /* GFXMMU */ + + +#define __HAL_RCC_DMA1_IS_CLK_DISABLED() (READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_DMA1EN) == 0U) + +#define __HAL_RCC_DMA2_IS_CLK_DISABLED() (READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_DMA2EN) == 0U) + +#if defined(DMAMUX1) +#define __HAL_RCC_DMAMUX1_IS_CLK_DISABLED() (READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_DMAMUX1EN) == 0U) +#endif /* DMAMUX1 */ + +#define __HAL_RCC_FLASH_IS_CLK_DISABLED() (READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_FLASHEN) == 0U) + +#define __HAL_RCC_CRC_IS_CLK_DISABLED() (READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CRCEN) == 0U) + +#define __HAL_RCC_TSC_IS_CLK_DISABLED() (READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_TSCEN) == 0U) + +#if defined(DMA2D) +#define __HAL_RCC_DMA2D_IS_CLK_DISABLED() (READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_DMA2DEN) == 0U) +#endif /* DMA2D */ + +#if defined(GFXMMU) +#define __HAL_RCC_GFXMMU_IS_CLK_DISABLED() (READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GFXMMUEN) == 0U) +#endif /* GFXMMU */ + +/** + * @} + */ + +/** @defgroup RCC_AHB2_Clock_Enable_Disable_Status AHB2 Peripheral Clock Enabled or Disabled Status + * @brief Check whether the AHB2 peripheral clock is enabled or not. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ + +#define __HAL_RCC_GPIOA_IS_CLK_ENABLED() (READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_GPIOAEN) != 0U) + +#define __HAL_RCC_GPIOB_IS_CLK_ENABLED() (READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_GPIOBEN) != 0U) + +#define __HAL_RCC_GPIOC_IS_CLK_ENABLED() (READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_GPIOCEN) != 0U) + +#if defined(GPIOD) +#define __HAL_RCC_GPIOD_IS_CLK_ENABLED() (READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_GPIODEN) != 0U) +#endif /* GPIOD */ + +#if defined(GPIOE) +#define __HAL_RCC_GPIOE_IS_CLK_ENABLED() (READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_GPIOEEN) != 0U) +#endif /* GPIOE */ + +#if defined(GPIOF) +#define __HAL_RCC_GPIOF_IS_CLK_ENABLED() (READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_GPIOFEN) != 0U) +#endif /* GPIOF */ + +#if defined(GPIOG) +#define __HAL_RCC_GPIOG_IS_CLK_ENABLED() (READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_GPIOGEN) != 0U) +#endif /* GPIOG */ + +#define __HAL_RCC_GPIOH_IS_CLK_ENABLED() (READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_GPIOHEN) != 0U) + +#if defined(GPIOI) +#define __HAL_RCC_GPIOI_IS_CLK_ENABLED() (READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_GPIOIEN) != 0U) +#endif /* GPIOI */ + +#if defined(USB_OTG_FS) +#define __HAL_RCC_USB_OTG_FS_IS_CLK_ENABLED() (READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_OTGFSEN) != 0U) +#endif /* USB_OTG_FS */ + +#define __HAL_RCC_ADC_IS_CLK_ENABLED() (READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_ADCEN) != 0U) + +#if defined(DCMI) +#define __HAL_RCC_DCMI_IS_CLK_ENABLED() (READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_DCMIEN) != 0U) +#endif /* DCMI */ + +#if defined(PKA) +#define __HAL_RCC_PKA_IS_CLK_ENABLED() (READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_PKAEN) != 0U) +#endif /* PKA */ + +#if defined(AES) +#define __HAL_RCC_AES_IS_CLK_ENABLED() (READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_AESEN) != 0U) +#endif /* AES */ + +#if defined(HASH) +#define __HAL_RCC_HASH_IS_CLK_ENABLED() (READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_HASHEN) != 0U) +#endif /* HASH */ + +#define __HAL_RCC_RNG_IS_CLK_ENABLED() (READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_RNGEN) != 0U) + +#if defined(OCTOSPIM) +#define __HAL_RCC_OSPIM_IS_CLK_ENABLED() (READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_OSPIMEN) != 0U) +#endif /* OCTOSPIM */ + +#if defined(SDMMC1) && defined(RCC_AHB2ENR_SDMMC1EN) +#define __HAL_RCC_SDMMC1_IS_CLK_ENABLED() (READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_SDMMC1EN) != 0U) +#endif /* SDMMC1 && RCC_AHB2ENR_SDMMC1EN */ + +#if defined(SDMMC2) +#define __HAL_RCC_SDMMC2_IS_CLK_ENABLED() (READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_SDMMC2EN) != 0U) +#endif /* SDMMC2 */ + + +#define __HAL_RCC_GPIOA_IS_CLK_DISABLED() (READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_GPIOAEN) == 0U) + +#define __HAL_RCC_GPIOB_IS_CLK_DISABLED() (READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_GPIOBEN) == 0U) + +#define __HAL_RCC_GPIOC_IS_CLK_DISABLED() (READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_GPIOCEN) == 0U) + +#if defined(GPIOD) +#define __HAL_RCC_GPIOD_IS_CLK_DISABLED() (READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_GPIODEN) == 0U) +#endif /* GPIOD */ + +#if defined(GPIOE) +#define __HAL_RCC_GPIOE_IS_CLK_DISABLED() (READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_GPIOEEN) == 0U) +#endif /* GPIOE */ + +#if defined(GPIOF) +#define __HAL_RCC_GPIOF_IS_CLK_DISABLED() (READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_GPIOFEN) == 0U) +#endif /* GPIOF */ + +#if defined(GPIOG) +#define __HAL_RCC_GPIOG_IS_CLK_DISABLED() (READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_GPIOGEN) == 0U) +#endif /* GPIOG */ + +#define __HAL_RCC_GPIOH_IS_CLK_DISABLED() (READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_GPIOHEN) == 0U) + +#if defined(GPIOI) +#define __HAL_RCC_GPIOI_IS_CLK_DISABLED() (READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_GPIOIEN) == 0U) +#endif /* GPIOI */ + +#if defined(USB_OTG_FS) +#define __HAL_RCC_USB_OTG_FS_IS_CLK_DISABLED() (READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_OTGFSEN) == 0U) +#endif /* USB_OTG_FS */ + +#define __HAL_RCC_ADC_IS_CLK_DISABLED() (READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_ADCEN) == 0U) + +#if defined(DCMI) +#define __HAL_RCC_DCMI_IS_CLK_DISABLED() (READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_DCMIEN) == 0U) +#endif /* DCMI */ + +#if defined(PKA) +#define __HAL_RCC_PKA_IS_CLK_DISABLED() (READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_PKAEN) == 0U) +#endif /* PKA */ + +#if defined(AES) +#define __HAL_RCC_AES_IS_CLK_DISABLED() (READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_AESEN) == 0U) +#endif /* AES */ + +#if defined(HASH) +#define __HAL_RCC_HASH_IS_CLK_DISABLED() (READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_HASHEN) == 0U) +#endif /* HASH */ + +#define __HAL_RCC_RNG_IS_CLK_DISABLED() (READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_RNGEN) == 0U) + +#if defined(OCTOSPIM) +#define __HAL_RCC_OSPIM_IS_CLK_DISABLED() (READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_OSPIMEN) == 0U) +#endif /* OCTOSPIM */ + +#if defined(SDMMC1) && defined(RCC_AHB2ENR_SDMMC1EN) +#define __HAL_RCC_SDMMC1_IS_CLK_DISABLED() (READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_SDMMC1EN) == 0U) +#endif /* SDMMC1 && RCC_AHB2ENR_SDMMC1EN */ + +#if defined(SDMMC2) +#define __HAL_RCC_SDMMC2_IS_CLK_DISABLED() (READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_SDMMC2EN) == 0U) +#endif /* SDMMC2 */ + +/** + * @} + */ + +/** @defgroup RCC_AHB3_Clock_Enable_Disable_Status AHB3 Peripheral Clock Enabled or Disabled Status + * @brief Check whether the AHB3 peripheral clock is enabled or not. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ + +#if defined(FMC_BANK1) +#define __HAL_RCC_FMC_IS_CLK_ENABLED() (READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN) != 0U) +#endif /* FMC_BANK1 */ + +#if defined(QUADSPI) +#define __HAL_RCC_QSPI_IS_CLK_ENABLED() (READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_QSPIEN) != 0U) +#endif /* QUADSPI */ + +#if defined(OCTOSPI1) +#define __HAL_RCC_OSPI1_IS_CLK_ENABLED() (READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_OSPI1EN) != 0U) +#endif /* OCTOSPI1 */ + +#if defined(OCTOSPI2) +#define __HAL_RCC_OSPI2_IS_CLK_ENABLED() (READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_OSPI2EN) != 0U) +#endif /* OCTOSPI2 */ + +#if defined(FMC_BANK1) +#define __HAL_RCC_FMC_IS_CLK_DISABLED() (READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN) == 0U) +#endif /* FMC_BANK1 */ + +#if defined(QUADSPI) +#define __HAL_RCC_QSPI_IS_CLK_DISABLED() (READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_QSPIEN) == 0U) +#endif /* QUADSPI */ + +#if defined(OCTOSPI1) +#define __HAL_RCC_OSPI1_IS_CLK_DISABLED() (READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_OSPI1EN) == 0U) +#endif /* OCTOSPI1 */ + +#if defined(OCTOSPI2) +#define __HAL_RCC_OSPI2_IS_CLK_DISABLED() (READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_OSPI2EN) == 0U) +#endif /* OCTOSPI2 */ + +/** + * @} + */ + +/** @defgroup RCC_APB1_Clock_Enable_Disable_Status APB1 Peripheral Clock Enabled or Disabled Status + * @brief Check whether the APB1 peripheral clock is enabled or not. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ + +#define __HAL_RCC_TIM2_IS_CLK_ENABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_TIM2EN) != 0U) + +#if defined(TIM3) +#define __HAL_RCC_TIM3_IS_CLK_ENABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_TIM3EN) != 0U) +#endif /* TIM3 */ + +#if defined(TIM4) +#define __HAL_RCC_TIM4_IS_CLK_ENABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_TIM4EN) != 0U) +#endif /* TIM4 */ + +#if defined(TIM5) +#define __HAL_RCC_TIM5_IS_CLK_ENABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_TIM5EN) != 0U) +#endif /* TIM5 */ + +#define __HAL_RCC_TIM6_IS_CLK_ENABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_TIM6EN) != 0U) + +#if defined(TIM7) +#define __HAL_RCC_TIM7_IS_CLK_ENABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_TIM7EN) != 0U) +#endif /* TIM7 */ + +#if defined(LCD) +#define __HAL_RCC_LCD_IS_CLK_ENABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_LCDEN) != 0U) +#endif /* LCD */ + +#if defined(RCC_APB1ENR1_RTCAPBEN) +#define __HAL_RCC_RTCAPB_IS_CLK_ENABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_RTCAPBEN) != 0U) +#endif /* RCC_APB1ENR1_RTCAPBEN */ + +#define __HAL_RCC_WWDG_IS_CLK_ENABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_WWDGEN) != 0U) + +#if defined(SPI2) +#define __HAL_RCC_SPI2_IS_CLK_ENABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_SPI2EN) != 0U) +#endif /* SPI2 */ + +#if defined(SPI3) +#define __HAL_RCC_SPI3_IS_CLK_ENABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_SPI3EN) != 0U) +#endif /* SPI3 */ + +#define __HAL_RCC_USART2_IS_CLK_ENABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_USART2EN) != 0U) + +#if defined(USART3) +#define __HAL_RCC_USART3_IS_CLK_ENABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_USART3EN) != 0U) +#endif /* USART3 */ + +#if defined(UART4) +#define __HAL_RCC_UART4_IS_CLK_ENABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_UART4EN) != 0U) +#endif /* UART4 */ + +#if defined(UART5) +#define __HAL_RCC_UART5_IS_CLK_ENABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_UART5EN) != 0U) +#endif /* UART5 */ + +#define __HAL_RCC_I2C1_IS_CLK_ENABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_I2C1EN) != 0U) + +#if defined(I2C2) +#define __HAL_RCC_I2C2_IS_CLK_ENABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_I2C2EN) != 0U) +#endif /* I2C2 */ + +#define __HAL_RCC_I2C3_IS_CLK_ENABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_I2C3EN) != 0U) + +#if defined(I2C4) +#define __HAL_RCC_I2C4_IS_CLK_ENABLED() (READ_BIT(RCC->APB1ENR2, RCC_APB1ENR2_I2C4EN) != 0U) +#endif /* I2C4 */ + +#if defined(CRS) +#define __HAL_RCC_CRS_IS_CLK_ENABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_CRSEN) != 0U) +#endif /* CRS */ + +#if defined(CAN1) +#define __HAL_RCC_CAN1_IS_CLK_ENABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_CAN1EN) != 0U) +#endif /* CAN1 */ + +#if defined(CAN2) +#define __HAL_RCC_CAN2_IS_CLK_ENABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_CAN2EN) != 0U) +#endif /* CAN2 */ + +#if defined(USB) +#define __HAL_RCC_USB_IS_CLK_ENABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_USBFSEN) != 0U) +#endif /* USB */ + +#define __HAL_RCC_PWR_IS_CLK_ENABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_PWREN) != 0U) + +#if defined(DAC1) +#define __HAL_RCC_DAC1_IS_CLK_ENABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_DAC1EN) != 0U) +#endif /* DAC1 */ + +#define __HAL_RCC_OPAMP_IS_CLK_ENABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_OPAMPEN) != 0U) + +#define __HAL_RCC_LPTIM1_IS_CLK_ENABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_LPTIM1EN) != 0U) + +#define __HAL_RCC_LPUART1_IS_CLK_ENABLED() (READ_BIT(RCC->APB1ENR2, RCC_APB1ENR2_LPUART1EN) != 0U) + +#if defined(SWPMI1) +#define __HAL_RCC_SWPMI1_IS_CLK_ENABLED() (READ_BIT(RCC->APB1ENR2, RCC_APB1ENR2_SWPMI1EN) != 0U) +#endif /* SWPMI1 */ + +#define __HAL_RCC_LPTIM2_IS_CLK_ENABLED() (READ_BIT(RCC->APB1ENR2, RCC_APB1ENR2_LPTIM2EN) != 0U) + + +#define __HAL_RCC_TIM2_IS_CLK_DISABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_TIM2EN) == 0U) + +#if defined(TIM3) +#define __HAL_RCC_TIM3_IS_CLK_DISABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_TIM3EN) == 0U) +#endif /* TIM3 */ + +#if defined(TIM4) +#define __HAL_RCC_TIM4_IS_CLK_DISABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_TIM4EN) == 0U) +#endif /* TIM4 */ + +#if defined(TIM5) +#define __HAL_RCC_TIM5_IS_CLK_DISABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_TIM5EN) == 0U) +#endif /* TIM5 */ + +#define __HAL_RCC_TIM6_IS_CLK_DISABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_TIM6EN) == 0U) + +#if defined(TIM7) +#define __HAL_RCC_TIM7_IS_CLK_DISABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_TIM7EN) == 0U) +#endif /* TIM7 */ + +#if defined(LCD) +#define __HAL_RCC_LCD_IS_CLK_DISABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_LCDEN) == 0U) +#endif /* LCD */ + +#if defined(RCC_APB1ENR1_RTCAPBEN) +#define __HAL_RCC_RTCAPB_IS_CLK_DISABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_RTCAPBEN) == 0U) +#endif /* RCC_APB1ENR1_RTCAPBEN */ + +#define __HAL_RCC_WWDG_IS_CLK_DISABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_WWDGEN) == 0U) + +#if defined(SPI2) +#define __HAL_RCC_SPI2_IS_CLK_DISABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_SPI2EN) == 0U) +#endif /* SPI2 */ + +#if defined(SPI3) +#define __HAL_RCC_SPI3_IS_CLK_DISABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_SPI3EN) == 0U) +#endif /* SPI3 */ + +#define __HAL_RCC_USART2_IS_CLK_DISABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_USART2EN) == 0U) + +#if defined(USART3) +#define __HAL_RCC_USART3_IS_CLK_DISABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_USART3EN) == 0U) +#endif /* USART3 */ + +#if defined(UART4) +#define __HAL_RCC_UART4_IS_CLK_DISABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_UART4EN) == 0U) +#endif /* UART4 */ + +#if defined(UART5) +#define __HAL_RCC_UART5_IS_CLK_DISABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_UART5EN) == 0U) +#endif /* UART5 */ + +#define __HAL_RCC_I2C1_IS_CLK_DISABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_I2C1EN) == 0U) + +#if defined(I2C2) +#define __HAL_RCC_I2C2_IS_CLK_DISABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_I2C2EN) == 0U) +#endif /* I2C2 */ + +#define __HAL_RCC_I2C3_IS_CLK_DISABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_I2C3EN) == 0U) + +#if defined(I2C4) +#define __HAL_RCC_I2C4_IS_CLK_DISABLED() (READ_BIT(RCC->APB1ENR2, RCC_APB1ENR2_I2C4EN) == 0U) +#endif /* I2C4 */ + +#if defined(CRS) +#define __HAL_RCC_CRS_IS_CLK_DISABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_CRSEN) == 0U) +#endif /* CRS */ + +#if defined(CAN1) +#define __HAL_RCC_CAN1_IS_CLK_DISABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_CAN1EN) == 0U) +#endif /* CAN1 */ + +#if defined(CAN2) +#define __HAL_RCC_CAN2_IS_CLK_DISABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_CAN2EN) == 0U) +#endif /* CAN2 */ + +#if defined(USB) +#define __HAL_RCC_USB_IS_CLK_DISABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_USBFSEN) == 0U) +#endif /* USB */ + +#define __HAL_RCC_PWR_IS_CLK_DISABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_PWREN) == 0U) + +#if defined(DAC1) +#define __HAL_RCC_DAC1_IS_CLK_DISABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_DAC1EN) == 0U) +#endif /* DAC1 */ + +#define __HAL_RCC_OPAMP_IS_CLK_DISABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_OPAMPEN) == 0U) + +#define __HAL_RCC_LPTIM1_IS_CLK_DISABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_LPTIM1EN) == 0U) + +#define __HAL_RCC_LPUART1_IS_CLK_DISABLED() (READ_BIT(RCC->APB1ENR2, RCC_APB1ENR2_LPUART1EN) == 0U) + +#if defined(SWPMI1) +#define __HAL_RCC_SWPMI1_IS_CLK_DISABLED() (READ_BIT(RCC->APB1ENR2, RCC_APB1ENR2_SWPMI1EN) == 0U) +#endif /* SWPMI1 */ + +#define __HAL_RCC_LPTIM2_IS_CLK_DISABLED() (READ_BIT(RCC->APB1ENR2, RCC_APB1ENR2_LPTIM2EN) == 0U) + +/** + * @} + */ + +/** @defgroup RCC_APB2_Clock_Enable_Disable_Status APB2 Peripheral Clock Enabled or Disabled Status + * @brief Check whether the APB2 peripheral clock is enabled or not. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ + +#define __HAL_RCC_SYSCFG_IS_CLK_ENABLED() (READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SYSCFGEN) != 0U) + +#define __HAL_RCC_FIREWALL_IS_CLK_ENABLED() (READ_BIT(RCC->APB2ENR, RCC_APB2ENR_FWEN) != 0U) + +#if defined(SDMMC1) && defined(RCC_APB2ENR_SDMMC1EN) +#define __HAL_RCC_SDMMC1_IS_CLK_ENABLED() (READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SDMMC1EN) != 0U) +#endif /* SDMMC1 && RCC_APB2ENR_SDMMC1EN */ + +#define __HAL_RCC_TIM1_IS_CLK_ENABLED() (READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM1EN) != 0U) + +#define __HAL_RCC_SPI1_IS_CLK_ENABLED() (READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI1EN) != 0U) + +#if defined(TIM8) +#define __HAL_RCC_TIM8_IS_CLK_ENABLED() (READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM8EN) != 0U) +#endif /* TIM8 */ + +#define __HAL_RCC_USART1_IS_CLK_ENABLED() (READ_BIT(RCC->APB2ENR, RCC_APB2ENR_USART1EN) != 0U) + +#define __HAL_RCC_TIM15_IS_CLK_ENABLED() (READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM15EN) != 0U) + +#define __HAL_RCC_TIM16_IS_CLK_ENABLED() (READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM16EN) != 0U) + +#if defined(TIM17) +#define __HAL_RCC_TIM17_IS_CLK_ENABLED() (READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM17EN) != 0U) +#endif /* TIM17 */ + +#if defined(SAI1) +#define __HAL_RCC_SAI1_IS_CLK_ENABLED() (READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SAI1EN) != 0U) +#endif /* SAI1 */ + +#if defined(SAI2) +#define __HAL_RCC_SAI2_IS_CLK_ENABLED() (READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SAI2EN) != 0U) +#endif /* SAI2 */ + +#if defined(DFSDM1_Filter0) +#define __HAL_RCC_DFSDM1_IS_CLK_ENABLED() (READ_BIT(RCC->APB2ENR, RCC_APB2ENR_DFSDM1EN) != 0U) +#endif /* DFSDM1_Filter0 */ + +#if defined(LTDC) +#define __HAL_RCC_LTDC_IS_CLK_ENABLED() (READ_BIT(RCC->APB2ENR, RCC_APB2ENR_LTDCEN) != 0U) +#endif /* LTDC */ + +#if defined(DSI) +#define __HAL_RCC_DSI_IS_CLK_ENABLED() (READ_BIT(RCC->APB2ENR, RCC_APB2ENR_DSIEN) != 0U) +#endif /* DSI */ + + +#define __HAL_RCC_SYSCFG_IS_CLK_DISABLED() (READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SYSCFGEN) == 0U) + +#if defined(SDMMC1) && defined(RCC_APB2ENR_SDMMC1EN) +#define __HAL_RCC_SDMMC1_IS_CLK_DISABLED() (READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SDMMC1EN) == 0U) +#endif /* SDMMC1 && RCC_APB2ENR_SDMMC1EN */ + +#define __HAL_RCC_TIM1_IS_CLK_DISABLED() (READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM1EN) == 0U) + +#define __HAL_RCC_SPI1_IS_CLK_DISABLED() (READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI1EN) == 0U) + +#if defined(TIM8) +#define __HAL_RCC_TIM8_IS_CLK_DISABLED() (READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM8EN) == 0U) +#endif /* TIM8 */ + +#define __HAL_RCC_USART1_IS_CLK_DISABLED() (READ_BIT(RCC->APB2ENR, RCC_APB2ENR_USART1EN) == 0U) + +#define __HAL_RCC_TIM15_IS_CLK_DISABLED() (READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM15EN) == 0U) + +#define __HAL_RCC_TIM16_IS_CLK_DISABLED() (READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM16EN) == 0U) + +#if defined(TIM17) +#define __HAL_RCC_TIM17_IS_CLK_DISABLED() (READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM17EN) == 0U) +#endif /* TIM17 */ + +#if defined(SAI1) +#define __HAL_RCC_SAI1_IS_CLK_DISABLED() (READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SAI1EN) == 0U) +#endif /* SAI1 */ + +#if defined(SAI2) +#define __HAL_RCC_SAI2_IS_CLK_DISABLED() (READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SAI2EN) == 0U) +#endif /* SAI2 */ + +#if defined(DFSDM1_Filter0) +#define __HAL_RCC_DFSDM1_IS_CLK_DISABLED() (READ_BIT(RCC->APB2ENR, RCC_APB2ENR_DFSDM1EN) == 0U) +#endif /* DFSDM1_Filter0 */ + +#if defined(LTDC) +#define __HAL_RCC_LTDC_IS_CLK_DISABLED() (READ_BIT(RCC->APB2ENR, RCC_APB2ENR_LTDCEN) == 0U) +#endif /* LTDC */ + +#if defined(DSI) +#define __HAL_RCC_DSI_IS_CLK_DISABLED() (READ_BIT(RCC->APB2ENR, RCC_APB2ENR_DSIEN) == 0U) +#endif /* DSI */ + +/** + * @} + */ + +/** @defgroup RCC_AHB1_Force_Release_Reset AHB1 Peripheral Force Release Reset + * @brief Force or release AHB1 peripheral reset. + * @{ + */ +#define __HAL_RCC_AHB1_FORCE_RESET() WRITE_REG(RCC->AHB1RSTR, 0xFFFFFFFFUL) + +#define __HAL_RCC_DMA1_FORCE_RESET() SET_BIT(RCC->AHB1RSTR, RCC_AHB1RSTR_DMA1RST) + +#define __HAL_RCC_DMA2_FORCE_RESET() SET_BIT(RCC->AHB1RSTR, RCC_AHB1RSTR_DMA2RST) + +#if defined(DMAMUX1) +#define __HAL_RCC_DMAMUX1_FORCE_RESET() SET_BIT(RCC->AHB1RSTR, RCC_AHB1RSTR_DMAMUX1RST) +#endif /* DMAMUX1 */ + +#define __HAL_RCC_FLASH_FORCE_RESET() SET_BIT(RCC->AHB1RSTR, RCC_AHB1RSTR_FLASHRST) + +#define __HAL_RCC_CRC_FORCE_RESET() SET_BIT(RCC->AHB1RSTR, RCC_AHB1RSTR_CRCRST) + +#define __HAL_RCC_TSC_FORCE_RESET() SET_BIT(RCC->AHB1RSTR, RCC_AHB1RSTR_TSCRST) + +#if defined(DMA2D) +#define __HAL_RCC_DMA2D_FORCE_RESET() SET_BIT(RCC->AHB1RSTR, RCC_AHB1RSTR_DMA2DRST) +#endif /* DMA2D */ + +#if defined(GFXMMU) +#define __HAL_RCC_GFXMMU_FORCE_RESET() SET_BIT(RCC->AHB1RSTR, RCC_AHB1RSTR_GFXMMURST) +#endif /* GFXMMU */ + + +#define __HAL_RCC_AHB1_RELEASE_RESET() WRITE_REG(RCC->AHB1RSTR, 0x00000000UL) + +#define __HAL_RCC_DMA1_RELEASE_RESET() CLEAR_BIT(RCC->AHB1RSTR, RCC_AHB1RSTR_DMA1RST) + +#define __HAL_RCC_DMA2_RELEASE_RESET() CLEAR_BIT(RCC->AHB1RSTR, RCC_AHB1RSTR_DMA2RST) + +#if defined(DMAMUX1) +#define __HAL_RCC_DMAMUX1_RELEASE_RESET() CLEAR_BIT(RCC->AHB1RSTR, RCC_AHB1RSTR_DMAMUX1RST) +#endif /* DMAMUX1 */ + +#define __HAL_RCC_FLASH_RELEASE_RESET() CLEAR_BIT(RCC->AHB1RSTR, RCC_AHB1RSTR_FLASHRST) + +#define __HAL_RCC_CRC_RELEASE_RESET() CLEAR_BIT(RCC->AHB1RSTR, RCC_AHB1RSTR_CRCRST) + +#define __HAL_RCC_TSC_RELEASE_RESET() CLEAR_BIT(RCC->AHB1RSTR, RCC_AHB1RSTR_TSCRST) + +#if defined(DMA2D) +#define __HAL_RCC_DMA2D_RELEASE_RESET() CLEAR_BIT(RCC->AHB1RSTR, RCC_AHB1RSTR_DMA2DRST) +#endif /* DMA2D */ + +#if defined(GFXMMU) +#define __HAL_RCC_GFXMMU_RELEASE_RESET() CLEAR_BIT(RCC->AHB1RSTR, RCC_AHB1RSTR_GFXMMURST) +#endif /* GFXMMU */ + +/** + * @} + */ + +/** @defgroup RCC_AHB2_Force_Release_Reset AHB2 Peripheral Force Release Reset + * @brief Force or release AHB2 peripheral reset. + * @{ + */ +#define __HAL_RCC_AHB2_FORCE_RESET() WRITE_REG(RCC->AHB2RSTR, 0xFFFFFFFFUL) + +#define __HAL_RCC_GPIOA_FORCE_RESET() SET_BIT(RCC->AHB2RSTR, RCC_AHB2RSTR_GPIOARST) + +#define __HAL_RCC_GPIOB_FORCE_RESET() SET_BIT(RCC->AHB2RSTR, RCC_AHB2RSTR_GPIOBRST) + +#define __HAL_RCC_GPIOC_FORCE_RESET() SET_BIT(RCC->AHB2RSTR, RCC_AHB2RSTR_GPIOCRST) + +#if defined(GPIOD) +#define __HAL_RCC_GPIOD_FORCE_RESET() SET_BIT(RCC->AHB2RSTR, RCC_AHB2RSTR_GPIODRST) +#endif /* GPIOD */ + +#if defined(GPIOE) +#define __HAL_RCC_GPIOE_FORCE_RESET() SET_BIT(RCC->AHB2RSTR, RCC_AHB2RSTR_GPIOERST) +#endif /* GPIOE */ + +#if defined(GPIOF) +#define __HAL_RCC_GPIOF_FORCE_RESET() SET_BIT(RCC->AHB2RSTR, RCC_AHB2RSTR_GPIOFRST) +#endif /* GPIOF */ + +#if defined(GPIOG) +#define __HAL_RCC_GPIOG_FORCE_RESET() SET_BIT(RCC->AHB2RSTR, RCC_AHB2RSTR_GPIOGRST) +#endif /* GPIOG */ + +#define __HAL_RCC_GPIOH_FORCE_RESET() SET_BIT(RCC->AHB2RSTR, RCC_AHB2RSTR_GPIOHRST) + +#if defined(GPIOI) +#define __HAL_RCC_GPIOI_FORCE_RESET() SET_BIT(RCC->AHB2RSTR, RCC_AHB2RSTR_GPIOIRST) +#endif /* GPIOI */ + +#if defined(USB_OTG_FS) +#define __HAL_RCC_USB_OTG_FS_FORCE_RESET() SET_BIT(RCC->AHB2RSTR, RCC_AHB2RSTR_OTGFSRST) +#endif /* USB_OTG_FS */ + +#define __HAL_RCC_ADC_FORCE_RESET() SET_BIT(RCC->AHB2RSTR, RCC_AHB2RSTR_ADCRST) + +#if defined(DCMI) +#define __HAL_RCC_DCMI_FORCE_RESET() SET_BIT(RCC->AHB2RSTR, RCC_AHB2RSTR_DCMIRST) +#endif /* DCMI */ + +#if defined(PKA) +#define __HAL_RCC_PKA_FORCE_RESET() SET_BIT(RCC->AHB2RSTR, RCC_AHB2RSTR_PKARST) +#endif /* PKA */ + +#if defined(AES) +#define __HAL_RCC_AES_FORCE_RESET() SET_BIT(RCC->AHB2RSTR, RCC_AHB2RSTR_AESRST) +#endif /* AES */ + +#if defined(HASH) +#define __HAL_RCC_HASH_FORCE_RESET() SET_BIT(RCC->AHB2RSTR, RCC_AHB2RSTR_HASHRST) +#endif /* HASH */ + +#define __HAL_RCC_RNG_FORCE_RESET() SET_BIT(RCC->AHB2RSTR, RCC_AHB2RSTR_RNGRST) + +#if defined(OCTOSPIM) +#define __HAL_RCC_OSPIM_FORCE_RESET() SET_BIT(RCC->AHB2RSTR, RCC_AHB2RSTR_OSPIMRST) +#endif /* OCTOSPIM */ + +#if defined(SDMMC1) && defined(RCC_AHB2RSTR_SDMMC1RST) +#define __HAL_RCC_SDMMC1_FORCE_RESET() SET_BIT(RCC->AHB2RSTR, RCC_AHB2RSTR_SDMMC1RST) +#endif /* SDMMC1 && RCC_AHB2RSTR_SDMMC1RST */ + +#if defined(SDMMC2) +#define __HAL_RCC_SDMMC2_FORCE_RESET() SET_BIT(RCC->AHB2RSTR, RCC_AHB2RSTR_SDMMC2RST) +#endif /* SDMMC2 */ + + +#define __HAL_RCC_AHB2_RELEASE_RESET() WRITE_REG(RCC->AHB2RSTR, 0x00000000UL) + +#define __HAL_RCC_GPIOA_RELEASE_RESET() CLEAR_BIT(RCC->AHB2RSTR, RCC_AHB2RSTR_GPIOARST) + +#define __HAL_RCC_GPIOB_RELEASE_RESET() CLEAR_BIT(RCC->AHB2RSTR, RCC_AHB2RSTR_GPIOBRST) + +#define __HAL_RCC_GPIOC_RELEASE_RESET() CLEAR_BIT(RCC->AHB2RSTR, RCC_AHB2RSTR_GPIOCRST) + +#if defined(GPIOD) +#define __HAL_RCC_GPIOD_RELEASE_RESET() CLEAR_BIT(RCC->AHB2RSTR, RCC_AHB2RSTR_GPIODRST) +#endif /* GPIOD */ + +#if defined(GPIOE) +#define __HAL_RCC_GPIOE_RELEASE_RESET() CLEAR_BIT(RCC->AHB2RSTR, RCC_AHB2RSTR_GPIOERST) +#endif /* GPIOE */ + +#if defined(GPIOF) +#define __HAL_RCC_GPIOF_RELEASE_RESET() CLEAR_BIT(RCC->AHB2RSTR, RCC_AHB2RSTR_GPIOFRST) +#endif /* GPIOF */ + +#if defined(GPIOG) +#define __HAL_RCC_GPIOG_RELEASE_RESET() CLEAR_BIT(RCC->AHB2RSTR, RCC_AHB2RSTR_GPIOGRST) +#endif /* GPIOG */ + +#define __HAL_RCC_GPIOH_RELEASE_RESET() CLEAR_BIT(RCC->AHB2RSTR, RCC_AHB2RSTR_GPIOHRST) + +#if defined(GPIOI) +#define __HAL_RCC_GPIOI_RELEASE_RESET() CLEAR_BIT(RCC->AHB2RSTR, RCC_AHB2RSTR_GPIOIRST) +#endif /* GPIOI */ + +#if defined(USB_OTG_FS) +#define __HAL_RCC_USB_OTG_FS_RELEASE_RESET() CLEAR_BIT(RCC->AHB2RSTR, RCC_AHB2RSTR_OTGFSRST) +#endif /* USB_OTG_FS */ + +#define __HAL_RCC_ADC_RELEASE_RESET() CLEAR_BIT(RCC->AHB2RSTR, RCC_AHB2RSTR_ADCRST) + +#if defined(DCMI) +#define __HAL_RCC_DCMI_RELEASE_RESET() CLEAR_BIT(RCC->AHB2RSTR, RCC_AHB2RSTR_DCMIRST) +#endif /* DCMI */ + +#if defined(PKA) +#define __HAL_RCC_PKA_RELEASE_RESET() CLEAR_BIT(RCC->AHB2RSTR, RCC_AHB2RSTR_PKARST) +#endif /* PKA */ + +#if defined(AES) +#define __HAL_RCC_AES_RELEASE_RESET() CLEAR_BIT(RCC->AHB2RSTR, RCC_AHB2RSTR_AESRST) +#endif /* AES */ + +#if defined(HASH) +#define __HAL_RCC_HASH_RELEASE_RESET() CLEAR_BIT(RCC->AHB2RSTR, RCC_AHB2RSTR_HASHRST) +#endif /* HASH */ + +#define __HAL_RCC_RNG_RELEASE_RESET() CLEAR_BIT(RCC->AHB2RSTR, RCC_AHB2RSTR_RNGRST) + +#if defined(OCTOSPIM) +#define __HAL_RCC_OSPIM_RELEASE_RESET() CLEAR_BIT(RCC->AHB2RSTR, RCC_AHB2RSTR_OSPIMRST) +#endif /* OCTOSPIM */ + +#if defined(SDMMC1) && defined(RCC_AHB2RSTR_SDMMC1RST) +#define __HAL_RCC_SDMMC1_RELEASE_RESET() CLEAR_BIT(RCC->AHB2RSTR, RCC_AHB2RSTR_SDMMC1RST) +#endif /* SDMMC1 && RCC_AHB2RSTR_SDMMC1RST */ + +#if defined(SDMMC2) +#define __HAL_RCC_SDMMC2_RELEASE_RESET() CLEAR_BIT(RCC->AHB2RSTR, RCC_AHB2RSTR_SDMMC2RST) +#endif /* SDMMC2 */ + +/** + * @} + */ + +/** @defgroup RCC_AHB3_Force_Release_Reset AHB3 Peripheral Force Release Reset + * @brief Force or release AHB3 peripheral reset. + * @{ + */ +#define __HAL_RCC_AHB3_FORCE_RESET() WRITE_REG(RCC->AHB3RSTR, 0xFFFFFFFFUL) + +#if defined(FMC_BANK1) +#define __HAL_RCC_FMC_FORCE_RESET() SET_BIT(RCC->AHB3RSTR, RCC_AHB3RSTR_FMCRST) +#endif /* FMC_BANK1 */ + +#if defined(QUADSPI) +#define __HAL_RCC_QSPI_FORCE_RESET() SET_BIT(RCC->AHB3RSTR, RCC_AHB3RSTR_QSPIRST) +#endif /* QUADSPI */ + +#if defined(OCTOSPI1) +#define __HAL_RCC_OSPI1_FORCE_RESET() SET_BIT(RCC->AHB3RSTR, RCC_AHB3RSTR_OSPI1RST) +#endif /* OCTOSPI1 */ + +#if defined(OCTOSPI2) +#define __HAL_RCC_OSPI2_FORCE_RESET() SET_BIT(RCC->AHB3RSTR, RCC_AHB3RSTR_OSPI2RST) +#endif /* OCTOSPI2 */ + +#define __HAL_RCC_AHB3_RELEASE_RESET() WRITE_REG(RCC->AHB3RSTR, 0x00000000UL) + +#if defined(FMC_BANK1) +#define __HAL_RCC_FMC_RELEASE_RESET() CLEAR_BIT(RCC->AHB3RSTR, RCC_AHB3RSTR_FMCRST) +#endif /* FMC_BANK1 */ + +#if defined(QUADSPI) +#define __HAL_RCC_QSPI_RELEASE_RESET() CLEAR_BIT(RCC->AHB3RSTR, RCC_AHB3RSTR_QSPIRST) +#endif /* QUADSPI */ + +#if defined(OCTOSPI1) +#define __HAL_RCC_OSPI1_RELEASE_RESET() CLEAR_BIT(RCC->AHB3RSTR, RCC_AHB3RSTR_OSPI1RST) +#endif /* OCTOSPI1 */ + +#if defined(OCTOSPI2) +#define __HAL_RCC_OSPI2_RELEASE_RESET() CLEAR_BIT(RCC->AHB3RSTR, RCC_AHB3RSTR_OSPI2RST) +#endif /* OCTOSPI2 */ + +/** + * @} + */ + +/** @defgroup RCC_APB1_Force_Release_Reset APB1 Peripheral Force Release Reset + * @brief Force or release APB1 peripheral reset. + * @{ + */ +#define __HAL_RCC_APB1_FORCE_RESET() do { \ + WRITE_REG(RCC->APB1RSTR1, 0xFFFFFFFFUL); \ + WRITE_REG(RCC->APB1RSTR2, 0xFFFFFFFFUL); \ + } while(0) + +#define __HAL_RCC_TIM2_FORCE_RESET() SET_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_TIM2RST) + +#if defined(TIM3) +#define __HAL_RCC_TIM3_FORCE_RESET() SET_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_TIM3RST) +#endif /* TIM3 */ + +#if defined(TIM4) +#define __HAL_RCC_TIM4_FORCE_RESET() SET_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_TIM4RST) +#endif /* TIM4 */ + +#if defined(TIM5) +#define __HAL_RCC_TIM5_FORCE_RESET() SET_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_TIM5RST) +#endif /* TIM5 */ + +#define __HAL_RCC_TIM6_FORCE_RESET() SET_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_TIM6RST) + +#if defined(TIM7) +#define __HAL_RCC_TIM7_FORCE_RESET() SET_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_TIM7RST) +#endif /* TIM7 */ + +#if defined(LCD) +#define __HAL_RCC_LCD_FORCE_RESET() SET_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_LCDRST) +#endif /* LCD */ + +#if defined(SPI2) +#define __HAL_RCC_SPI2_FORCE_RESET() SET_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_SPI2RST) +#endif /* SPI2 */ + +#if defined(SPI3) +#define __HAL_RCC_SPI3_FORCE_RESET() SET_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_SPI3RST) +#endif /* SPI3 */ + +#define __HAL_RCC_USART2_FORCE_RESET() SET_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_USART2RST) + +#if defined(USART3) +#define __HAL_RCC_USART3_FORCE_RESET() SET_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_USART3RST) +#endif /* USART3 */ + +#if defined(UART4) +#define __HAL_RCC_UART4_FORCE_RESET() SET_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_UART4RST) +#endif /* UART4 */ + +#if defined(UART5) +#define __HAL_RCC_UART5_FORCE_RESET() SET_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_UART5RST) +#endif /* UART5 */ + +#define __HAL_RCC_I2C1_FORCE_RESET() SET_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_I2C1RST) + +#if defined(I2C2) +#define __HAL_RCC_I2C2_FORCE_RESET() SET_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_I2C2RST) +#endif /* I2C2 */ + +#define __HAL_RCC_I2C3_FORCE_RESET() SET_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_I2C3RST) + +#if defined(I2C4) +#define __HAL_RCC_I2C4_FORCE_RESET() SET_BIT(RCC->APB1RSTR2, RCC_APB1RSTR2_I2C4RST) +#endif /* I2C4 */ + +#if defined(CRS) +#define __HAL_RCC_CRS_FORCE_RESET() SET_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_CRSRST) +#endif /* CRS */ + +#if defined(CAN1) +#define __HAL_RCC_CAN1_FORCE_RESET() SET_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_CAN1RST) +#endif /* CAN1 */ + +#if defined(CAN2) +#define __HAL_RCC_CAN2_FORCE_RESET() SET_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_CAN2RST) +#endif /* CAN2 */ + +#if defined(USB) +#define __HAL_RCC_USB_FORCE_RESET() SET_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_USBFSRST) +#endif /* USB */ + +#define __HAL_RCC_PWR_FORCE_RESET() SET_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_PWRRST) + +#if defined(DAC1) +#define __HAL_RCC_DAC1_FORCE_RESET() SET_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_DAC1RST) +#endif /* DAC1 */ + +#define __HAL_RCC_OPAMP_FORCE_RESET() SET_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_OPAMPRST) + +#define __HAL_RCC_LPTIM1_FORCE_RESET() SET_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_LPTIM1RST) + +#define __HAL_RCC_LPUART1_FORCE_RESET() SET_BIT(RCC->APB1RSTR2, RCC_APB1RSTR2_LPUART1RST) + +#if defined(SWPMI1) +#define __HAL_RCC_SWPMI1_FORCE_RESET() SET_BIT(RCC->APB1RSTR2, RCC_APB1RSTR2_SWPMI1RST) +#endif /* SWPMI1 */ + +#define __HAL_RCC_LPTIM2_FORCE_RESET() SET_BIT(RCC->APB1RSTR2, RCC_APB1RSTR2_LPTIM2RST) + + +#define __HAL_RCC_APB1_RELEASE_RESET() do { \ + WRITE_REG(RCC->APB1RSTR1, 0x00000000UL); \ + WRITE_REG(RCC->APB1RSTR2, 0x00000000UL); \ + } while(0) + +#define __HAL_RCC_TIM2_RELEASE_RESET() CLEAR_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_TIM2RST) + +#if defined(TIM3) +#define __HAL_RCC_TIM3_RELEASE_RESET() CLEAR_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_TIM3RST) +#endif /* TIM3 */ + +#if defined(TIM4) +#define __HAL_RCC_TIM4_RELEASE_RESET() CLEAR_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_TIM4RST) +#endif /* TIM4 */ + +#if defined(TIM5) +#define __HAL_RCC_TIM5_RELEASE_RESET() CLEAR_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_TIM5RST) +#endif /* TIM5 */ + +#define __HAL_RCC_TIM6_RELEASE_RESET() CLEAR_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_TIM6RST) + +#if defined(TIM7) +#define __HAL_RCC_TIM7_RELEASE_RESET() CLEAR_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_TIM7RST) +#endif /* TIM7 */ + +#if defined(LCD) +#define __HAL_RCC_LCD_RELEASE_RESET() CLEAR_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_LCDRST) +#endif /* LCD */ + +#if defined(SPI2) +#define __HAL_RCC_SPI2_RELEASE_RESET() CLEAR_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_SPI2RST) +#endif /* SPI2 */ + +#if defined(SPI3) +#define __HAL_RCC_SPI3_RELEASE_RESET() CLEAR_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_SPI3RST) +#endif /* SPI3 */ + +#define __HAL_RCC_USART2_RELEASE_RESET() CLEAR_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_USART2RST) + +#if defined(USART3) +#define __HAL_RCC_USART3_RELEASE_RESET() CLEAR_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_USART3RST) +#endif /* USART3 */ + +#if defined(UART4) +#define __HAL_RCC_UART4_RELEASE_RESET() CLEAR_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_UART4RST) +#endif /* UART4 */ + +#if defined(UART5) +#define __HAL_RCC_UART5_RELEASE_RESET() CLEAR_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_UART5RST) +#endif /* UART5 */ + +#define __HAL_RCC_I2C1_RELEASE_RESET() CLEAR_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_I2C1RST) + +#if defined(I2C2) +#define __HAL_RCC_I2C2_RELEASE_RESET() CLEAR_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_I2C2RST) +#endif /* I2C2 */ + +#define __HAL_RCC_I2C3_RELEASE_RESET() CLEAR_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_I2C3RST) + +#if defined(I2C4) +#define __HAL_RCC_I2C4_RELEASE_RESET() CLEAR_BIT(RCC->APB1RSTR2, RCC_APB1RSTR2_I2C4RST) +#endif /* I2C4 */ + +#if defined(CRS) +#define __HAL_RCC_CRS_RELEASE_RESET() CLEAR_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_CRSRST) +#endif /* CRS */ + +#if defined(CAN1) +#define __HAL_RCC_CAN1_RELEASE_RESET() CLEAR_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_CAN1RST) +#endif /* CAN1 */ + +#if defined(CAN2) +#define __HAL_RCC_CAN2_RELEASE_RESET() CLEAR_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_CAN2RST) +#endif /* CAN2 */ + +#if defined(USB) +#define __HAL_RCC_USB_RELEASE_RESET() CLEAR_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_USBFSRST) +#endif /* USB */ + +#define __HAL_RCC_PWR_RELEASE_RESET() CLEAR_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_PWRRST) + +#if defined(DAC1) +#define __HAL_RCC_DAC1_RELEASE_RESET() CLEAR_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_DAC1RST) +#endif /* DAC1 */ + +#define __HAL_RCC_OPAMP_RELEASE_RESET() CLEAR_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_OPAMPRST) + +#define __HAL_RCC_LPTIM1_RELEASE_RESET() CLEAR_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_LPTIM1RST) + +#define __HAL_RCC_LPUART1_RELEASE_RESET() CLEAR_BIT(RCC->APB1RSTR2, RCC_APB1RSTR2_LPUART1RST) + +#if defined(SWPMI1) +#define __HAL_RCC_SWPMI1_RELEASE_RESET() CLEAR_BIT(RCC->APB1RSTR2, RCC_APB1RSTR2_SWPMI1RST) +#endif /* SWPMI1 */ + +#define __HAL_RCC_LPTIM2_RELEASE_RESET() CLEAR_BIT(RCC->APB1RSTR2, RCC_APB1RSTR2_LPTIM2RST) + +/** + * @} + */ + +/** @defgroup RCC_APB2_Force_Release_Reset APB2 Peripheral Force Release Reset + * @brief Force or release APB2 peripheral reset. + * @{ + */ +#define __HAL_RCC_APB2_FORCE_RESET() WRITE_REG(RCC->APB2RSTR, 0xFFFFFFFFUL) + +#define __HAL_RCC_SYSCFG_FORCE_RESET() SET_BIT(RCC->APB2RSTR, RCC_APB2RSTR_SYSCFGRST) + +#if defined(SDMMC1) && defined(RCC_APB2RSTR_SDMMC1RST) +#define __HAL_RCC_SDMMC1_FORCE_RESET() SET_BIT(RCC->APB2RSTR, RCC_APB2RSTR_SDMMC1RST) +#endif /* SDMMC1 && RCC_APB2RSTR_SDMMC1RST */ + +#define __HAL_RCC_TIM1_FORCE_RESET() SET_BIT(RCC->APB2RSTR, RCC_APB2RSTR_TIM1RST) + +#define __HAL_RCC_SPI1_FORCE_RESET() SET_BIT(RCC->APB2RSTR, RCC_APB2RSTR_SPI1RST) + +#if defined(TIM8) +#define __HAL_RCC_TIM8_FORCE_RESET() SET_BIT(RCC->APB2RSTR, RCC_APB2RSTR_TIM8RST) +#endif /* TIM8 */ + +#define __HAL_RCC_USART1_FORCE_RESET() SET_BIT(RCC->APB2RSTR, RCC_APB2RSTR_USART1RST) + +#define __HAL_RCC_TIM15_FORCE_RESET() SET_BIT(RCC->APB2RSTR, RCC_APB2RSTR_TIM15RST) + +#define __HAL_RCC_TIM16_FORCE_RESET() SET_BIT(RCC->APB2RSTR, RCC_APB2RSTR_TIM16RST) + +#if defined(TIM17) +#define __HAL_RCC_TIM17_FORCE_RESET() SET_BIT(RCC->APB2RSTR, RCC_APB2RSTR_TIM17RST) +#endif /* TIM17 */ + +#if defined(SAI1) +#define __HAL_RCC_SAI1_FORCE_RESET() SET_BIT(RCC->APB2RSTR, RCC_APB2RSTR_SAI1RST) +#endif /* SAI1 */ + +#if defined(SAI2) +#define __HAL_RCC_SAI2_FORCE_RESET() SET_BIT(RCC->APB2RSTR, RCC_APB2RSTR_SAI2RST) +#endif /* SAI2 */ + +#if defined(DFSDM1_Filter0) +#define __HAL_RCC_DFSDM1_FORCE_RESET() SET_BIT(RCC->APB2RSTR, RCC_APB2RSTR_DFSDM1RST) +#endif /* DFSDM1_Filter0 */ + +#if defined(LTDC) +#define __HAL_RCC_LTDC_FORCE_RESET() SET_BIT(RCC->APB2RSTR, RCC_APB2RSTR_LTDCRST) +#endif /* LTDC */ + +#if defined(DSI) +#define __HAL_RCC_DSI_FORCE_RESET() SET_BIT(RCC->APB2RSTR, RCC_APB2RSTR_DSIRST) +#endif /* DSI */ + + +#define __HAL_RCC_APB2_RELEASE_RESET() WRITE_REG(RCC->APB2RSTR, 0x00000000UL) + +#define __HAL_RCC_SYSCFG_RELEASE_RESET() CLEAR_BIT(RCC->APB2RSTR, RCC_APB2RSTR_SYSCFGRST) + +#if defined(SDMMC1) && defined(RCC_APB2RSTR_SDMMC1RST) +#define __HAL_RCC_SDMMC1_RELEASE_RESET() CLEAR_BIT(RCC->APB2RSTR, RCC_APB2RSTR_SDMMC1RST) +#endif /* SDMMC1 && RCC_APB2RSTR_SDMMC1RST */ + +#define __HAL_RCC_TIM1_RELEASE_RESET() CLEAR_BIT(RCC->APB2RSTR, RCC_APB2RSTR_TIM1RST) + +#define __HAL_RCC_SPI1_RELEASE_RESET() CLEAR_BIT(RCC->APB2RSTR, RCC_APB2RSTR_SPI1RST) + +#if defined(TIM8) +#define __HAL_RCC_TIM8_RELEASE_RESET() CLEAR_BIT(RCC->APB2RSTR, RCC_APB2RSTR_TIM8RST) +#endif /* TIM8 */ + +#define __HAL_RCC_USART1_RELEASE_RESET() CLEAR_BIT(RCC->APB2RSTR, RCC_APB2RSTR_USART1RST) + +#define __HAL_RCC_TIM15_RELEASE_RESET() CLEAR_BIT(RCC->APB2RSTR, RCC_APB2RSTR_TIM15RST) + +#define __HAL_RCC_TIM16_RELEASE_RESET() CLEAR_BIT(RCC->APB2RSTR, RCC_APB2RSTR_TIM16RST) + +#if defined(TIM17) +#define __HAL_RCC_TIM17_RELEASE_RESET() CLEAR_BIT(RCC->APB2RSTR, RCC_APB2RSTR_TIM17RST) +#endif /* TIM17 */ + +#if defined(SAI1) +#define __HAL_RCC_SAI1_RELEASE_RESET() CLEAR_BIT(RCC->APB2RSTR, RCC_APB2RSTR_SAI1RST) +#endif /* SAI1 */ + +#if defined(SAI2) +#define __HAL_RCC_SAI2_RELEASE_RESET() CLEAR_BIT(RCC->APB2RSTR, RCC_APB2RSTR_SAI2RST) +#endif /* SAI2 */ + +#if defined(DFSDM1_Filter0) +#define __HAL_RCC_DFSDM1_RELEASE_RESET() CLEAR_BIT(RCC->APB2RSTR, RCC_APB2RSTR_DFSDM1RST) +#endif /* DFSDM1_Filter0 */ + +#if defined(LTDC) +#define __HAL_RCC_LTDC_RELEASE_RESET() CLEAR_BIT(RCC->APB2RSTR, RCC_APB2RSTR_LTDCRST) +#endif /* LTDC */ + +#if defined(DSI) +#define __HAL_RCC_DSI_RELEASE_RESET() CLEAR_BIT(RCC->APB2RSTR, RCC_APB2RSTR_DSIRST) +#endif /* DSI */ + +/** + * @} + */ + +/** @defgroup RCC_AHB1_Clock_Sleep_Enable_Disable AHB1 Peripheral Clock Sleep Enable Disable + * @brief Enable or disable the AHB1 peripheral clock during Low Power (Sleep) mode. + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. + * @note By default, all peripheral clocks are enabled during SLEEP mode. + * @{ + */ + +#define __HAL_RCC_DMA1_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHB1SMENR, RCC_AHB1SMENR_DMA1SMEN) + +#define __HAL_RCC_DMA2_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHB1SMENR, RCC_AHB1SMENR_DMA2SMEN) + +#if defined(DMAMUX1) +#define __HAL_RCC_DMAMUX1_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHB1SMENR, RCC_AHB1SMENR_DMAMUX1SMEN) +#endif /* DMAMUX1 */ + +#define __HAL_RCC_FLASH_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHB1SMENR, RCC_AHB1SMENR_FLASHSMEN) + +#define __HAL_RCC_SRAM1_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHB1SMENR, RCC_AHB1SMENR_SRAM1SMEN) + +#define __HAL_RCC_CRC_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHB1SMENR, RCC_AHB1SMENR_CRCSMEN) + +#define __HAL_RCC_TSC_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHB1SMENR, RCC_AHB1SMENR_TSCSMEN) + +#if defined(DMA2D) +#define __HAL_RCC_DMA2D_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHB1SMENR, RCC_AHB1SMENR_DMA2DSMEN) +#endif /* DMA2D */ + +#if defined(GFXMMU) +#define __HAL_RCC_GFXMMU_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHB1SMENR, RCC_AHB1SMENR_GFXMMUSMEN) +#endif /* GFXMMU */ + + +#define __HAL_RCC_DMA1_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHB1SMENR, RCC_AHB1SMENR_DMA1SMEN) + +#define __HAL_RCC_DMA2_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHB1SMENR, RCC_AHB1SMENR_DMA2SMEN) + +#if defined(DMAMUX1) +#define __HAL_RCC_DMAMUX1_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHB1SMENR, RCC_AHB1SMENR_DMAMUX1SMEN) +#endif /* DMAMUX1 */ + +#define __HAL_RCC_FLASH_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHB1SMENR, RCC_AHB1SMENR_FLASHSMEN) + +#define __HAL_RCC_SRAM1_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHB1SMENR, RCC_AHB1SMENR_SRAM1SMEN) + +#define __HAL_RCC_CRC_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHB1SMENR, RCC_AHB1SMENR_CRCSMEN) + +#define __HAL_RCC_TSC_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHB1SMENR, RCC_AHB1SMENR_TSCSMEN) + +#if defined(DMA2D) +#define __HAL_RCC_DMA2D_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHB1SMENR, RCC_AHB1SMENR_DMA2DSMEN) +#endif /* DMA2D */ + +#if defined(GFXMMU) +#define __HAL_RCC_GFXMMU_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHB1SMENR, RCC_AHB1SMENR_GFXMMUSMEN) +#endif /* GFXMMU */ + +/** + * @} + */ + +/** @defgroup RCC_AHB2_Clock_Sleep_Enable_Disable AHB2 Peripheral Clock Sleep Enable Disable + * @brief Enable or disable the AHB2 peripheral clock during Low Power (Sleep) mode. + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. + * @note By default, all peripheral clocks are enabled during SLEEP mode. + * @{ + */ + +#define __HAL_RCC_GPIOA_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_GPIOASMEN) + +#define __HAL_RCC_GPIOB_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_GPIOBSMEN) + +#define __HAL_RCC_GPIOC_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_GPIOCSMEN) + +#if defined(GPIOD) +#define __HAL_RCC_GPIOD_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_GPIODSMEN) +#endif /* GPIOD */ + +#if defined(GPIOE) +#define __HAL_RCC_GPIOE_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_GPIOESMEN) +#endif /* GPIOE */ + +#if defined(GPIOF) +#define __HAL_RCC_GPIOF_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_GPIOFSMEN) +#endif /* GPIOF */ + +#if defined(GPIOG) +#define __HAL_RCC_GPIOG_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_GPIOGSMEN) +#endif /* GPIOG */ + +#define __HAL_RCC_GPIOH_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_GPIOHSMEN) + +#if defined(GPIOI) +#define __HAL_RCC_GPIOI_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_GPIOISMEN) +#endif /* GPIOI */ + +#define __HAL_RCC_SRAM2_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_SRAM2SMEN) + +#if defined(SRAM3) +#define __HAL_RCC_SRAM3_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_SRAM3SMEN) +#endif /* SRAM3 */ + +#if defined(USB_OTG_FS) +#define __HAL_RCC_USB_OTG_FS_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_OTGFSSMEN) +#endif /* USB_OTG_FS */ + +#define __HAL_RCC_ADC_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_ADCSMEN) + +#if defined(DCMI) +#define __HAL_RCC_DCMI_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_DCMISMEN) +#endif /* DCMI */ + +#if defined(PKA) +#define __HAL_RCC_PKA_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_PKASMEN) +#endif /* PKA */ + +#if defined(AES) +#define __HAL_RCC_AES_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_AESSMEN) +#endif /* AES */ + +#if defined(HASH) +#define __HAL_RCC_HASH_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_HASHSMEN) +#endif /* HASH */ + +#define __HAL_RCC_RNG_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_RNGSMEN) + +#if defined(OCTOSPIM) +#define __HAL_RCC_OSPIM_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_OSPIMSMEN) +#endif /* OCTOSPIM */ + +#if defined(SDMMC1) && defined(RCC_AHB2SMENR_SDMMC1SMEN) +#define __HAL_RCC_SDMMC1_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_SDMMC1SMEN) +#endif /* SDMMC1 && RCC_AHB2SMENR_SDMMC1SMEN */ + +#if defined(SDMMC2) +#define __HAL_RCC_SDMMC2_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_SDMMC2SMEN) +#endif /* SDMMC2 */ + + +#define __HAL_RCC_GPIOA_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_GPIOASMEN) + +#define __HAL_RCC_GPIOB_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_GPIOBSMEN) + +#define __HAL_RCC_GPIOC_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_GPIOCSMEN) + +#if defined(GPIOD) +#define __HAL_RCC_GPIOD_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_GPIODSMEN) +#endif /* GPIOD */ + +#if defined(GPIOE) +#define __HAL_RCC_GPIOE_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_GPIOESMEN) +#endif /* GPIOE */ + +#if defined(GPIOF) +#define __HAL_RCC_GPIOF_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_GPIOFSMEN) +#endif /* GPIOF */ + +#if defined(GPIOG) +#define __HAL_RCC_GPIOG_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_GPIOGSMEN) +#endif /* GPIOG */ + +#define __HAL_RCC_GPIOH_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_GPIOHSMEN) + +#if defined(GPIOI) +#define __HAL_RCC_GPIOI_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_GPIOISMEN) +#endif /* GPIOI */ + +#define __HAL_RCC_SRAM2_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_SRAM2SMEN) + +#if defined(SRAM3) +#define __HAL_RCC_SRAM3_IS_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_SRAM3SMEN) +#endif /* SRAM3 */ + +#if defined(USB_OTG_FS) +#define __HAL_RCC_USB_OTG_FS_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_OTGFSSMEN) +#endif /* USB_OTG_FS */ + +#define __HAL_RCC_ADC_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_ADCSMEN) + +#if defined(DCMI) +#define __HAL_RCC_DCMI_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_DCMISMEN) +#endif /* DCMI */ + +#if defined(PKA) +#define __HAL_RCC_PKA_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_PKASMEN) +#endif /* PKA */ + +#if defined(AES) +#define __HAL_RCC_AES_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_AESSMEN) +#endif /* AES */ + +#if defined(HASH) +#define __HAL_RCC_HASH_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_HASHSMEN) +#endif /* HASH */ + +#define __HAL_RCC_RNG_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_RNGSMEN) + +#if defined(OCTOSPIM) +#define __HAL_RCC_OSPIM_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_OSPIMSMEN) +#endif /* OCTOSPIM */ + +#if defined(SDMMC1) && defined(RCC_AHB2SMENR_SDMMC1SMEN) +#define __HAL_RCC_SDMMC1_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_SDMMC1SMEN) +#endif /* SDMMC1 && RCC_AHB2SMENR_SDMMC1SMEN */ + +#if defined(SDMMC2) +#define __HAL_RCC_SDMMC2_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_SDMMC2SMEN) +#endif /* SDMMC2 */ + +/** + * @} + */ + +/** @defgroup RCC_AHB3_Clock_Sleep_Enable_Disable AHB3 Peripheral Clock Sleep Enable Disable + * @brief Enable or disable the AHB3 peripheral clock during Low Power (Sleep) mode. + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. + * @note By default, all peripheral clocks are enabled during SLEEP mode. + * @{ + */ + +#if defined(QUADSPI) +#define __HAL_RCC_QSPI_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHB3SMENR, RCC_AHB3SMENR_QSPISMEN) +#endif /* QUADSPI */ + +#if defined(OCTOSPI1) +#define __HAL_RCC_OSPI1_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHB3SMENR, RCC_AHB3SMENR_OSPI1SMEN) +#endif /* OCTOSPI1 */ + +#if defined(OCTOSPI2) +#define __HAL_RCC_OSPI2_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHB3SMENR, RCC_AHB3SMENR_OSPI2SMEN) +#endif /* OCTOSPI2 */ + +#if defined(FMC_BANK1) +#define __HAL_RCC_FMC_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHB3SMENR, RCC_AHB3SMENR_FMCSMEN) +#endif /* FMC_BANK1 */ + +#if defined(QUADSPI) +#define __HAL_RCC_QSPI_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHB3SMENR, RCC_AHB3SMENR_QSPISMEN) +#endif /* QUADSPI */ + +#if defined(OCTOSPI1) +#define __HAL_RCC_OSPI1_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHB3SMENR, RCC_AHB3SMENR_OSPI1SMEN) +#endif /* OCTOSPI1 */ + +#if defined(OCTOSPI2) +#define __HAL_RCC_OSPI2_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHB3SMENR, RCC_AHB3SMENR_OSPI2SMEN) +#endif /* OCTOSPI2 */ + +#if defined(FMC_BANK1) +#define __HAL_RCC_FMC_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHB3SMENR, RCC_AHB3SMENR_FMCSMEN) +#endif /* FMC_BANK1 */ + +/** + * @} + */ + +/** @defgroup RCC_APB1_Clock_Sleep_Enable_Disable APB1 Peripheral Clock Sleep Enable Disable + * @brief Enable or disable the APB1 peripheral clock during Low Power (Sleep) mode. + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. + * @note By default, all peripheral clocks are enabled during SLEEP mode. + * @{ + */ + +#define __HAL_RCC_TIM2_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_TIM2SMEN) + +#if defined(TIM3) +#define __HAL_RCC_TIM3_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_TIM3SMEN) +#endif /* TIM3 */ + +#if defined(TIM4) +#define __HAL_RCC_TIM4_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_TIM4SMEN) +#endif /* TIM4 */ + +#if defined(TIM5) +#define __HAL_RCC_TIM5_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_TIM5SMEN) +#endif /* TIM5 */ + +#define __HAL_RCC_TIM6_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_TIM6SMEN) + +#if defined(TIM7) +#define __HAL_RCC_TIM7_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_TIM7SMEN) +#endif /* TIM7 */ + +#if defined(LCD) +#define __HAL_RCC_LCD_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_LCDSMEN) +#endif /* LCD */ + +#if defined(RCC_APB1SMENR1_RTCAPBSMEN) +#define __HAL_RCC_RTCAPB_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_RTCAPBSMEN) +#endif /* RCC_APB1SMENR1_RTCAPBSMEN */ + +#define __HAL_RCC_WWDG_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_WWDGSMEN) + +#if defined(SPI2) +#define __HAL_RCC_SPI2_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_SPI2SMEN) +#endif /* SPI2 */ + +#if defined(SPI3) +#define __HAL_RCC_SPI3_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_SPI3SMEN) +#endif /* SPI3 */ + +#define __HAL_RCC_USART2_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_USART2SMEN) + +#if defined(USART3) +#define __HAL_RCC_USART3_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_USART3SMEN) +#endif /* USART3 */ + +#if defined(UART4) +#define __HAL_RCC_UART4_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_UART4SMEN) +#endif /* UART4 */ + +#if defined(UART5) +#define __HAL_RCC_UART5_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_UART5SMEN) +#endif /* UART5 */ + +#define __HAL_RCC_I2C1_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_I2C1SMEN) + +#if defined(I2C2) +#define __HAL_RCC_I2C2_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_I2C2SMEN) +#endif /* I2C2 */ + +#define __HAL_RCC_I2C3_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_I2C3SMEN) + +#if defined(I2C4) +#define __HAL_RCC_I2C4_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB1SMENR2, RCC_APB1SMENR2_I2C4SMEN) +#endif /* I2C4 */ + +#if defined(CRS) +#define __HAL_RCC_CRS_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_CRSSMEN) +#endif /* CRS */ + +#if defined(CAN1) +#define __HAL_RCC_CAN1_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_CAN1SMEN) +#endif /* CAN1 */ + +#if defined(CAN2) +#define __HAL_RCC_CAN2_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_CAN2SMEN) +#endif /* CAN2 */ + +#if defined(USB) +#define __HAL_RCC_USB_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_USBFSSMEN) +#endif /* USB */ + +#define __HAL_RCC_PWR_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_PWRSMEN) + +#if defined(DAC1) +#define __HAL_RCC_DAC1_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_DAC1SMEN) +#endif /* DAC1 */ + +#define __HAL_RCC_OPAMP_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_OPAMPSMEN) + +#define __HAL_RCC_LPTIM1_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_LPTIM1SMEN) + +#define __HAL_RCC_LPUART1_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB1SMENR2, RCC_APB1SMENR2_LPUART1SMEN) + +#if defined(SWPMI1) +#define __HAL_RCC_SWPMI1_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB1SMENR2, RCC_APB1SMENR2_SWPMI1SMEN) +#endif /* SWPMI1 */ + +#define __HAL_RCC_LPTIM2_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB1SMENR2, RCC_APB1SMENR2_LPTIM2SMEN) + + +#define __HAL_RCC_TIM2_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_TIM2SMEN) + +#if defined(TIM3) +#define __HAL_RCC_TIM3_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_TIM3SMEN) +#endif /* TIM3 */ + +#if defined(TIM4) +#define __HAL_RCC_TIM4_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_TIM4SMEN) +#endif /* TIM4 */ + +#if defined(TIM5) +#define __HAL_RCC_TIM5_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_TIM5SMEN) +#endif /* TIM5 */ + +#define __HAL_RCC_TIM6_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_TIM6SMEN) + +#if defined(TIM7) +#define __HAL_RCC_TIM7_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_TIM7SMEN) +#endif /* TIM7 */ + +#if defined(LCD) +#define __HAL_RCC_LCD_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_LCDSMEN) +#endif /* LCD */ + +#if defined(RCC_APB1SMENR1_RTCAPBSMEN) +#define __HAL_RCC_RTCAPB_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_RTCAPBSMEN) +#endif /* RCC_APB1SMENR1_RTCAPBSMEN */ + +#define __HAL_RCC_WWDG_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_WWDGSMEN) + +#if defined(SPI2) +#define __HAL_RCC_SPI2_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_SPI2SMEN) +#endif /* SPI2 */ + +#if defined(SPI3) +#define __HAL_RCC_SPI3_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_SPI3SMEN) +#endif /* SPI3 */ + +#define __HAL_RCC_USART2_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_USART2SMEN) + +#if defined(USART3) +#define __HAL_RCC_USART3_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_USART3SMEN) +#endif /* USART3 */ + +#if defined(UART4) +#define __HAL_RCC_UART4_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_UART4SMEN) +#endif /* UART4 */ + +#if defined(UART5) +#define __HAL_RCC_UART5_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_UART5SMEN) +#endif /* UART5 */ + +#define __HAL_RCC_I2C1_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_I2C1SMEN) + +#if defined(I2C2) +#define __HAL_RCC_I2C2_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_I2C2SMEN) +#endif /* I2C2 */ + +#define __HAL_RCC_I2C3_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_I2C3SMEN) + +#if defined(I2C4) +#define __HAL_RCC_I2C4_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB1SMENR2, RCC_APB1SMENR2_I2C4SMEN) +#endif /* I2C4 */ + +#if defined(CRS) +#define __HAL_RCC_CRS_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_CRSSMEN) +#endif /* CRS */ + +#if defined(CAN1) +#define __HAL_RCC_CAN1_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_CAN1SMEN) +#endif /* CAN1 */ + +#if defined(CAN2) +#define __HAL_RCC_CAN2_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_CAN2SMEN) +#endif /* CAN2 */ + +#if defined(USB) +#define __HAL_RCC_USB_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_USBFSSMEN) +#endif /* USB */ + +#define __HAL_RCC_PWR_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_PWRSMEN) + +#if defined(DAC1) +#define __HAL_RCC_DAC1_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_DAC1SMEN) +#endif /* DAC1 */ + +#define __HAL_RCC_OPAMP_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_OPAMPSMEN) + +#define __HAL_RCC_LPTIM1_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_LPTIM1SMEN) + +#define __HAL_RCC_LPUART1_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB1SMENR2, RCC_APB1SMENR2_LPUART1SMEN) + +#if defined(SWPMI1) +#define __HAL_RCC_SWPMI1_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB1SMENR2, RCC_APB1SMENR2_SWPMI1SMEN) +#endif /* SWPMI1 */ + +#define __HAL_RCC_LPTIM2_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB1SMENR2, RCC_APB1SMENR2_LPTIM2SMEN) + +/** + * @} + */ + +/** @defgroup RCC_APB2_Clock_Sleep_Enable_Disable APB2 Peripheral Clock Sleep Enable Disable + * @brief Enable or disable the APB2 peripheral clock during Low Power (Sleep) mode. + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. + * @note By default, all peripheral clocks are enabled during SLEEP mode. + * @{ + */ + +#define __HAL_RCC_SYSCFG_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB2SMENR, RCC_APB2SMENR_SYSCFGSMEN) + +#if defined(SDMMC1) && defined(RCC_APB2SMENR_SDMMC1SMEN) +#define __HAL_RCC_SDMMC1_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB2SMENR, RCC_APB2SMENR_SDMMC1SMEN) +#endif /* SDMMC1 && RCC_APB2SMENR_SDMMC1SMEN */ + +#define __HAL_RCC_TIM1_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB2SMENR, RCC_APB2SMENR_TIM1SMEN) + +#define __HAL_RCC_SPI1_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB2SMENR, RCC_APB2SMENR_SPI1SMEN) + +#if defined(TIM8) +#define __HAL_RCC_TIM8_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB2SMENR, RCC_APB2SMENR_TIM8SMEN) +#endif /* TIM8 */ + +#define __HAL_RCC_USART1_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB2SMENR, RCC_APB2SMENR_USART1SMEN) + +#define __HAL_RCC_TIM15_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB2SMENR, RCC_APB2SMENR_TIM15SMEN) + +#define __HAL_RCC_TIM16_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB2SMENR, RCC_APB2SMENR_TIM16SMEN) + +#if defined(TIM17) +#define __HAL_RCC_TIM17_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB2SMENR, RCC_APB2SMENR_TIM17SMEN) +#endif /* TIM17 */ + +#if defined(SAI1) +#define __HAL_RCC_SAI1_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB2SMENR, RCC_APB2SMENR_SAI1SMEN) +#endif /* SAI1 */ + +#if defined(SAI2) +#define __HAL_RCC_SAI2_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB2SMENR, RCC_APB2SMENR_SAI2SMEN) +#endif /* SAI2 */ + +#if defined(DFSDM1_Filter0) +#define __HAL_RCC_DFSDM1_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB2SMENR, RCC_APB2SMENR_DFSDM1SMEN) +#endif /* DFSDM1_Filter0 */ + +#if defined(LTDC) +#define __HAL_RCC_LTDC_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB2SMENR, RCC_APB2SMENR_LTDCSMEN) +#endif /* LTDC */ + +#if defined(DSI) +#define __HAL_RCC_DSI_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB2SMENR, RCC_APB2SMENR_DSISMEN) +#endif /* DSI */ + + +#define __HAL_RCC_SYSCFG_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB2SMENR, RCC_APB2SMENR_SYSCFGSMEN) + +#if defined(SDMMC1) && defined(RCC_APB2SMENR_SDMMC1SMEN) +#define __HAL_RCC_SDMMC1_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB2SMENR, RCC_APB2SMENR_SDMMC1SMEN) +#endif /* SDMMC1 && RCC_APB2SMENR_SDMMC1SMEN */ + +#define __HAL_RCC_TIM1_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB2SMENR, RCC_APB2SMENR_TIM1SMEN) + +#define __HAL_RCC_SPI1_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB2SMENR, RCC_APB2SMENR_SPI1SMEN) + +#if defined(TIM8) +#define __HAL_RCC_TIM8_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB2SMENR, RCC_APB2SMENR_TIM8SMEN) +#endif /* TIM8 */ + +#define __HAL_RCC_USART1_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB2SMENR, RCC_APB2SMENR_USART1SMEN) + +#define __HAL_RCC_TIM15_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB2SMENR, RCC_APB2SMENR_TIM15SMEN) + +#define __HAL_RCC_TIM16_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB2SMENR, RCC_APB2SMENR_TIM16SMEN) + +#if defined(TIM17) +#define __HAL_RCC_TIM17_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB2SMENR, RCC_APB2SMENR_TIM17SMEN) +#endif /* TIM17 */ + +#if defined(SAI1) +#define __HAL_RCC_SAI1_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB2SMENR, RCC_APB2SMENR_SAI1SMEN) +#endif /* SAI1 */ + +#if defined(SAI2) +#define __HAL_RCC_SAI2_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB2SMENR, RCC_APB2SMENR_SAI2SMEN) +#endif /* SAI2 */ + +#if defined(DFSDM1_Filter0) +#define __HAL_RCC_DFSDM1_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB2SMENR, RCC_APB2SMENR_DFSDM1SMEN) +#endif /* DFSDM1_Filter0 */ + +#if defined(LTDC) +#define __HAL_RCC_LTDC_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB2SMENR, RCC_APB2SMENR_LTDCSMEN) +#endif /* LTDC */ + +#if defined(DSI) +#define __HAL_RCC_DSI_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB2SMENR, RCC_APB2SMENR_DSISMEN) +#endif /* DSI */ + +/** + * @} + */ + +/** @defgroup RCC_AHB1_Clock_Sleep_Enable_Disable_Status AHB1 Peripheral Clock Sleep Enabled or Disabled Status + * @brief Check whether the AHB1 peripheral clock during Low Power (Sleep) mode is enabled or not. + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. + * @note By default, all peripheral clocks are enabled during SLEEP mode. + * @{ + */ + +#define __HAL_RCC_DMA1_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB1SMENR, RCC_AHB1SMENR_DMA1SMEN) != 0U) + +#define __HAL_RCC_DMA2_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB1SMENR, RCC_AHB1SMENR_DMA2SMEN) != 0U) + +#if defined(DMAMUX1) +#define __HAL_RCC_DMAMUX1_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB1SMENR, RCC_AHB1SMENR_DMAMUX1SMEN) != 0U) +#endif /* DMAMUX1 */ + +#define __HAL_RCC_FLASH_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB1SMENR, RCC_AHB1SMENR_FLASHSMEN) != 0U) + +#define __HAL_RCC_SRAM1_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB1SMENR, RCC_AHB1SMENR_SRAM1SMEN) != 0U) + +#define __HAL_RCC_CRC_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB1SMENR, RCC_AHB1SMENR_CRCSMEN) != 0U) + +#define __HAL_RCC_TSC_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB1SMENR, RCC_AHB1SMENR_TSCSMEN) != 0U) + +#if defined(DMA2D) +#define __HAL_RCC_DMA2D_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB1SMENR, RCC_AHB1SMENR_DMA2DSMEN) != 0U) +#endif /* DMA2D */ + +#if defined(GFXMMU) +#define __HAL_RCC_GFXMMU_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB1SMENR, RCC_AHB1SMENR_GFXMMUSMEN) != 0U) +#endif /* GFXMMU */ + + +#define __HAL_RCC_DMA1_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHB1SMENR, RCC_AHB1SMENR_DMA1SMEN) == 0U) + +#define __HAL_RCC_DMA2_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHB1SMENR, RCC_AHB1SMENR_DMA2SMEN) == 0U) + +#if defined(DMAMUX1) +#define __HAL_RCC_DMAMUX1_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHB1SMENR, RCC_AHB1SMENR_DMAMUX1SMEN) == 0U) +#endif /* DMAMUX1 */ + +#define __HAL_RCC_FLASH_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHB1SMENR, RCC_AHB1SMENR_FLASHSMEN) == 0U) + +#define __HAL_RCC_SRAM1_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHB1SMENR, RCC_AHB1SMENR_SRAM1SMEN) == 0U) + +#define __HAL_RCC_CRC_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHB1SMENR, RCC_AHB1SMENR_CRCSMEN) == 0U) + +#define __HAL_RCC_TSC_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHB1SMENR, RCC_AHB1SMENR_TSCSMEN) == 0U) + +#if defined(DMA2D) +#define __HAL_RCC_DMA2D_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHB1SMENR, RCC_AHB1SMENR_DMA2DSMEN) == 0U) +#endif /* DMA2D */ + +#if defined(GFXMMU) +#define __HAL_RCC_GFXMMU_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHB1SMENR, RCC_AHB1SMENR_GFXMMUSMEN) == 0U) +#endif /* GFXMMU */ + +/** + * @} + */ + +/** @defgroup RCC_AHB2_Clock_Sleep_Enable_Disable_Status AHB2 Peripheral Clock Sleep Enabled or Disabled Status + * @brief Check whether the AHB2 peripheral clock during Low Power (Sleep) mode is enabled or not. + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. + * @note By default, all peripheral clocks are enabled during SLEEP mode. + * @{ + */ + +#define __HAL_RCC_GPIOA_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_GPIOASMEN) != 0U) + +#define __HAL_RCC_GPIOB_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_GPIOBSMEN) != 0U) + +#define __HAL_RCC_GPIOC_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_GPIOCSMEN) != 0U) + +#if defined(GPIOD) +#define __HAL_RCC_GPIOD_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_GPIODSMEN) != 0U) +#endif /* GPIOD */ + +#if defined(GPIOE) +#define __HAL_RCC_GPIOE_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_GPIOESMEN) != 0U) +#endif /* GPIOE */ + +#if defined(GPIOF) +#define __HAL_RCC_GPIOF_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_GPIOFSMEN) != 0U) +#endif /* GPIOF */ + +#if defined(GPIOG) +#define __HAL_RCC_GPIOG_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_GPIOGSMEN) != 0U) +#endif /* GPIOG */ + +#define __HAL_RCC_GPIOH_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_GPIOHSMEN) != 0U) + +#if defined(GPIOI) +#define __HAL_RCC_GPIOI_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_GPIOISMEN) != 0U) +#endif /* GPIOI */ + +#define __HAL_RCC_SRAM2_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_SRAM2SMEN) != 0U) + +#if defined(SRAM3) +#define __HAL_RCC_SRAM3_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_SRAM3SMEN) != 0U) +#endif /* SRAM3 */ + +#if defined(USB_OTG_FS) +#define __HAL_RCC_USB_OTG_FS_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_OTGFSSMEN) != 0U) +#endif /* USB_OTG_FS */ + +#define __HAL_RCC_ADC_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_ADCSMEN) != 0U) + +#if defined(DCMI) +#define __HAL_RCC_DCMI_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_DCMISMEN) != 0U) +#endif /* DCMI */ + +#if defined(PKA) +#define __HAL_RCC_PKA_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_PKASMEN) != 0U) +#endif /* PKA */ + +#if defined(AES) +#define __HAL_RCC_AES_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_AESSMEN) != 0U) +#endif /* AES */ + +#if defined(HASH) +#define __HAL_RCC_HASH_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_HASHSMEN) != 0U) +#endif /* HASH */ + +#define __HAL_RCC_RNG_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_RNGSMEN) != 0U) + +#if defined(OCTOSPIM) +#define __HAL_RCC_OSPIM_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_OSPIMSMEN) != 0U) +#endif /* OCTOSPIM */ + +#if defined(SDMMC1) && defined(RCC_AHB2SMENR_SDMMC1SMEN) +#define __HAL_RCC_SDMMC1_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_SDMMC1SMEN) != 0U) +#endif /* SDMMC1 && RCC_AHB2SMENR_SDMMC1SMEN */ + +#if defined(SDMMC2) +#define __HAL_RCC_SDMMC2_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_SDMMC2SMEN) != 0U) +#endif /* SDMMC2 */ + + +#define __HAL_RCC_GPIOA_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_GPIOASMEN) == 0U) + +#define __HAL_RCC_GPIOB_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_GPIOBSMEN) == 0U) + +#define __HAL_RCC_GPIOC_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_GPIOCSMEN) == 0U) + +#if defined(GPIOD) +#define __HAL_RCC_GPIOD_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_GPIODSMEN) == 0U) +#endif /* GPIOD */ + +#if defined(GPIOE) +#define __HAL_RCC_GPIOE_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_GPIOESMEN) == 0U) +#endif /* GPIOE */ + +#if defined(GPIOF) +#define __HAL_RCC_GPIOF_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_GPIOFSMEN) == 0U) +#endif /* GPIOF */ + +#if defined(GPIOG) +#define __HAL_RCC_GPIOG_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_GPIOGSMEN) == 0U) +#endif /* GPIOG */ + +#define __HAL_RCC_GPIOH_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_GPIOHSMEN) == 0U) + +#if defined(GPIOI) +#define __HAL_RCC_GPIOI_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_GPIOISMEN) == 0U) +#endif /* GPIOI */ + +#define __HAL_RCC_SRAM2_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_SRAM2SMEN) == 0U) + +#if defined(SRAM3) +#define __HAL_RCC_SRAM3_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_SRAM3SMEN) == 0U) +#endif /* SRAM3 */ + +#if defined(USB_OTG_FS) +#define __HAL_RCC_USB_OTG_FS_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_OTGFSSMEN) == 0U) +#endif /* USB_OTG_FS */ + +#define __HAL_RCC_ADC_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_ADCSMEN) == 0U) + +#if defined(DCMI) +#define __HAL_RCC_DCMI_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_DCMISMEN) == 0U) +#endif /* DCMI */ + +#if defined(PKA) +#define __HAL_RCC_PKA_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_PKASMEN) == 0U) +#endif /* PKA */ + +#if defined(AES) +#define __HAL_RCC_AES_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_AESSMEN) == 0U) +#endif /* AES */ + +#if defined(HASH) +#define __HAL_RCC_HASH_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_HASHSMEN) == 0U) +#endif /* HASH */ + +#define __HAL_RCC_RNG_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_RNGSMEN) == 0U) + +#if defined(OCTOSPIM) +#define __HAL_RCC_OSPIM_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_OSPIMSMEN) == 0U) +#endif /* OCTOSPIM */ + +#if defined(SDMMC1) && defined(RCC_AHB2SMENR_SDMMC1SMEN) +#define __HAL_RCC_SDMMC1_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_SDMMC1SMEN) == 0U) +#endif /* SDMMC1 && RCC_AHB2SMENR_SDMMC1SMEN */ + +#if defined(SDMMC2) +#define __HAL_RCC_SDMMC2_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_SDMMC2SMEN) == 0U) +#endif /* SDMMC2 */ + +/** + * @} + */ + +/** @defgroup RCC_AHB3_Clock_Sleep_Enable_Disable_Status AHB3 Peripheral Clock Sleep Enabled or Disabled Status + * @brief Check whether the AHB3 peripheral clock during Low Power (Sleep) mode is enabled or not. + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. + * @note By default, all peripheral clocks are enabled during SLEEP mode. + * @{ + */ + +#if defined(QUADSPI) +#define __HAL_RCC_QSPI_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB3SMENR, RCC_AHB3SMENR_QSPISMEN) != 0U) +#endif /* QUADSPI */ + +#if defined(OCTOSPI1) +#define __HAL_RCC_OSPI1_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB3SMENR, RCC_AHB3SMENR_OSPI1SMEN) != 0U) +#endif /* OCTOSPI1 */ + +#if defined(OCTOSPI2) +#define __HAL_RCC_OSPI2_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB3SMENR, RCC_AHB3SMENR_OSPI2SMEN) != 0U) +#endif /* OCTOSPI2 */ + +#if defined(FMC_BANK1) +#define __HAL_RCC_FMC_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB3SMENR, RCC_AHB3SMENR_FMCSMEN) != 0U) +#endif /* FMC_BANK1 */ + + +#if defined(QUADSPI) +#define __HAL_RCC_QSPI_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHB3SMENR, RCC_AHB3SMENR_QSPISMEN) == 0U) +#endif /* QUADSPI */ + +#if defined(OCTOSPI1) +#define __HAL_RCC_OSPI1_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHB3SMENR, RCC_AHB3SMENR_OSPI1SMEN) == 0U) +#endif /* OCTOSPI1 */ + +#if defined(OCTOSPI2) +#define __HAL_RCC_OSPI2_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHB3SMENR, RCC_AHB3SMENR_OSPI2SMEN) == 0U) +#endif /* OCTOSPI2 */ + +#if defined(FMC_BANK1) +#define __HAL_RCC_FMC_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHB3SMENR, RCC_AHB3SMENR_FMCSMEN) == 0U) +#endif /* FMC_BANK1 */ + +/** + * @} + */ + +/** @defgroup RCC_APB1_Clock_Sleep_Enable_Disable_Status APB1 Peripheral Clock Sleep Enabled or Disabled Status + * @brief Check whether the APB1 peripheral clock during Low Power (Sleep) mode is enabled or not. + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. + * @note By default, all peripheral clocks are enabled during SLEEP mode. + * @{ + */ + +#define __HAL_RCC_TIM2_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_TIM2SMEN) != 0U) + +#if defined(TIM3) +#define __HAL_RCC_TIM3_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_TIM3SMEN) != 0U) +#endif /* TIM3 */ + +#if defined(TIM4) +#define __HAL_RCC_TIM4_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_TIM4SMEN) != 0U) +#endif /* TIM4 */ + +#if defined(TIM5) +#define __HAL_RCC_TIM5_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_TIM5SMEN) != 0U) +#endif /* TIM5 */ + +#define __HAL_RCC_TIM6_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_TIM6SMEN) != 0U) + +#if defined(TIM7) +#define __HAL_RCC_TIM7_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_TIM7SMEN) != 0U) +#endif /* TIM7 */ + +#if defined(LCD) +#define __HAL_RCC_LCD_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_LCDSMEN) != 0U) +#endif /* LCD */ + +#if defined(RCC_APB1SMENR1_RTCAPBSMEN) +#define __HAL_RCC_RTCAPB_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_RTCAPBSMEN) != 0U) +#endif /* RCC_APB1SMENR1_RTCAPBSMEN */ + +#define __HAL_RCC_WWDG_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_WWDGSMEN) != 0U) + +#if defined(SPI2) +#define __HAL_RCC_SPI2_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_SPI2SMEN) != 0U) +#endif /* SPI2 */ + +#if defined(SPI3) +#define __HAL_RCC_SPI3_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_SPI3SMEN) != 0U) +#endif /* SPI3 */ + +#define __HAL_RCC_USART2_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_USART2SMEN) != 0U) + +#if defined(USART3) +#define __HAL_RCC_USART3_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_USART3SMEN) != 0U) +#endif /* USART3 */ + +#if defined(UART4) +#define __HAL_RCC_UART4_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_UART4SMEN) != 0U) +#endif /* UART4 */ + +#if defined(UART5) +#define __HAL_RCC_UART5_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_UART5SMEN) != 0U) +#endif /* UART5 */ + +#define __HAL_RCC_I2C1_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_I2C1SMEN) != 0U) + +#if defined(I2C2) +#define __HAL_RCC_I2C2_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_I2C2SMEN) != 0U) +#endif /* I2C2 */ + +#define __HAL_RCC_I2C3_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_I2C3SMEN) != 0U) + +#if defined(I2C4) +#define __HAL_RCC_I2C4_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1SMENR2, RCC_APB1SMENR2_I2C4SMEN) != 0U) +#endif /* I2C4 */ + +#if defined(CRS) +#define __HAL_RCC_CRS_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_CRSSMEN) != 0U) +#endif /* CRS */ + +#if defined(CAN1) +#define __HAL_RCC_CAN1_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_CAN1SMEN) != 0U) +#endif /* CAN1 */ + +#if defined(CAN2) +#define __HAL_RCC_CAN2_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_CAN2SMEN) != 0U) +#endif /* CAN2 */ + +#if defined(USB) +#define __HAL_RCC_USB_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_USBFSSMEN) != 0U) +#endif /* USB */ + +#define __HAL_RCC_PWR_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_PWRSMEN) != 0U) + +#if defined(DAC1) +#define __HAL_RCC_DAC1_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_DAC1SMEN) != 0U) +#endif /* DAC1 */ + +#define __HAL_RCC_OPAMP_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_OPAMPSMEN) != 0U) + +#define __HAL_RCC_LPTIM1_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_LPTIM1SMEN) != 0U) + +#define __HAL_RCC_LPUART1_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1SMENR2, RCC_APB1SMENR2_LPUART1SMEN) != 0U) + +#if defined(SWPMI1) +#define __HAL_RCC_SWPMI1_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1SMENR2, RCC_APB1SMENR2_SWPMI1SMEN) != 0U) +#endif /* SWPMI1 */ + +#define __HAL_RCC_LPTIM2_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1SMENR2, RCC_APB1SMENR2_LPTIM2SMEN) != 0U) + + +#define __HAL_RCC_TIM2_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_TIM2SMEN) == 0U) + +#if defined(TIM3) +#define __HAL_RCC_TIM3_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_TIM3SMEN) == 0U) +#endif /* TIM3 */ + +#if defined(TIM4) +#define __HAL_RCC_TIM4_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_TIM4SMEN) == 0U) +#endif /* TIM4 */ + +#if defined(TIM5) +#define __HAL_RCC_TIM5_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_TIM5SMEN) == 0U) +#endif /* TIM5 */ + +#define __HAL_RCC_TIM6_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_TIM6SMEN) == 0U) + +#if defined(TIM7) +#define __HAL_RCC_TIM7_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_TIM7SMEN) == 0U) +#endif /* TIM7 */ + +#if defined(LCD) +#define __HAL_RCC_LCD_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_LCDSMEN) == 0U) +#endif /* LCD */ + +#if defined(RCC_APB1SMENR1_RTCAPBSMEN) +#define __HAL_RCC_RTCAPB_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_RTCAPBSMEN) == 0U) +#endif /* RCC_APB1SMENR1_RTCAPBSMEN */ + +#define __HAL_RCC_WWDG_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_WWDGSMEN) == 0U) + +#if defined(SPI2) +#define __HAL_RCC_SPI2_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_SPI2SMEN) == 0U) +#endif /* SPI2 */ + +#if defined(SPI3) +#define __HAL_RCC_SPI3_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_SPI3SMEN) == 0U) +#endif /* SPI3 */ + +#define __HAL_RCC_USART2_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_USART2SMEN) == 0U) + +#if defined(USART3) +#define __HAL_RCC_USART3_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_USART3SMEN) == 0U) +#endif /* USART3 */ + +#if defined(UART4) +#define __HAL_RCC_UART4_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_UART4SMEN) == 0U) +#endif /* UART4 */ + +#if defined(UART5) +#define __HAL_RCC_UART5_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_UART5SMEN) == 0U) +#endif /* UART5 */ + +#define __HAL_RCC_I2C1_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_I2C1SMEN) == 0U) + +#if defined(I2C2) +#define __HAL_RCC_I2C2_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_I2C2SMEN) == 0U) +#endif /* I2C2 */ + +#define __HAL_RCC_I2C3_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_I2C3SMEN) == 0U) + +#if defined(I2C4) +#define __HAL_RCC_I2C4_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB1SMENR2, RCC_APB1SMENR2_I2C4SMEN) == 0U) +#endif /* I2C4 */ + +#if defined(CRS) +#define __HAL_RCC_CRS_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_CRSSMEN) == 0U) +#endif /* CRS */ + +#if defined(CAN1) +#define __HAL_RCC_CAN1_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_CAN1SMEN) == 0U) +#endif /* CAN1 */ + +#if defined(CAN2) +#define __HAL_RCC_CAN2_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_CAN2SMEN) == 0U) +#endif /* CAN2 */ + +#if defined(USB) +#define __HAL_RCC_USB_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_USBFSSMEN) == 0U) +#endif /* USB */ + +#define __HAL_RCC_PWR_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_PWRSMEN) == 0U) + +#if defined(DAC1) +#define __HAL_RCC_DAC1_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_DAC1SMEN) == 0U) +#endif /* DAC1 */ + +#define __HAL_RCC_OPAMP_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_OPAMPSMEN) == 0U) + +#define __HAL_RCC_LPTIM1_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_LPTIM1SMEN) == 0U) + +#define __HAL_RCC_LPUART1_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB1SMENR2, RCC_APB1SMENR2_LPUART1SMEN) == 0U) + +#if defined(SWPMI1) +#define __HAL_RCC_SWPMI1_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB1SMENR2, RCC_APB1SMENR2_SWPMI1SMEN) == 0U) +#endif /* SWPMI1 */ + +#define __HAL_RCC_LPTIM2_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB1SMENR2, RCC_APB1SMENR2_LPTIM2SMEN) == 0U) + +/** + * @} + */ + +/** @defgroup RCC_APB2_Clock_Sleep_Enable_Disable_Status APB2 Peripheral Clock Sleep Enabled or Disabled Status + * @brief Check whether the APB2 peripheral clock during Low Power (Sleep) mode is enabled or not. + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. + * @note By default, all peripheral clocks are enabled during SLEEP mode. + * @{ + */ + +#define __HAL_RCC_SYSCFG_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB2SMENR, RCC_APB2SMENR_SYSCFGSMEN) != 0U) + +#if defined(SDMMC1) && defined(RCC_APB2SMENR_SDMMC1SMEN) +#define __HAL_RCC_SDMMC1_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB2SMENR, RCC_APB2SMENR_SDMMC1SMEN) != 0U) +#endif /* SDMMC1 && RCC_APB2SMENR_SDMMC1SMEN */ + +#define __HAL_RCC_TIM1_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB2SMENR, RCC_APB2SMENR_TIM1SMEN) != 0U) + +#define __HAL_RCC_SPI1_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB2SMENR, RCC_APB2SMENR_SPI1SMEN) != 0U) + +#if defined(TIM8) +#define __HAL_RCC_TIM8_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB2SMENR, RCC_APB2SMENR_TIM8SMEN) != 0U) +#endif /* TIM8 */ + +#define __HAL_RCC_USART1_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB2SMENR, RCC_APB2SMENR_USART1SMEN) != 0U) + +#define __HAL_RCC_TIM15_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB2SMENR, RCC_APB2SMENR_TIM15SMEN) != 0U) + +#define __HAL_RCC_TIM16_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB2SMENR, RCC_APB2SMENR_TIM16SMEN) != 0U) + +#if defined(TIM17) +#define __HAL_RCC_TIM17_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB2SMENR, RCC_APB2SMENR_TIM17SMEN) != 0U) +#endif /* TIM17 */ + +#if defined(SAI1) +#define __HAL_RCC_SAI1_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB2SMENR, RCC_APB2SMENR_SAI1SMEN) != 0U) +#endif /* SAI1 */ + +#if defined(SAI2) +#define __HAL_RCC_SAI2_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB2SMENR, RCC_APB2SMENR_SAI2SMEN) != 0U) +#endif /* SAI2 */ + +#if defined(DFSDM1_Filter0) +#define __HAL_RCC_DFSDM1_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB2SMENR, RCC_APB2SMENR_DFSDM1SMEN) != 0U) +#endif /* DFSDM1_Filter0 */ + +#if defined(LTDC) +#define __HAL_RCC_LTDC_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB2SMENR, RCC_APB2SMENR_LTDCSMEN) != 0U) +#endif /* LTDC */ + +#if defined(DSI) +#define __HAL_RCC_DSI_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB2SMENR, RCC_APB2SMENR_DSISMEN) != 0U) +#endif /* DSI */ + + +#define __HAL_RCC_SYSCFG_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB2SMENR, RCC_APB2SMENR_SYSCFGSMEN) == 0U) + +#if defined(SDMMC1) && defined(RCC_APB2SMENR_SDMMC1SMEN) +#define __HAL_RCC_SDMMC1_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB2SMENR, RCC_APB2SMENR_SDMMC1SMEN) == 0U) +#endif /* SDMMC1 && RCC_APB2SMENR_SDMMC1SMEN */ + +#define __HAL_RCC_TIM1_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB2SMENR, RCC_APB2SMENR_TIM1SMEN) == 0U) + +#define __HAL_RCC_SPI1_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB2SMENR, RCC_APB2SMENR_SPI1SMEN) == 0U) + +#if defined(TIM8) +#define __HAL_RCC_TIM8_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB2SMENR, RCC_APB2SMENR_TIM8SMEN) == 0U) +#endif /* TIM8 */ + +#define __HAL_RCC_USART1_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB2SMENR, RCC_APB2SMENR_USART1SMEN) == 0U) + +#define __HAL_RCC_TIM15_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB2SMENR, RCC_APB2SMENR_TIM15SMEN) == 0U) + +#define __HAL_RCC_TIM16_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB2SMENR, RCC_APB2SMENR_TIM16SMEN) == 0U) + +#if defined(TIM17) +#define __HAL_RCC_TIM17_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB2SMENR, RCC_APB2SMENR_TIM17SMEN) == 0U) +#endif /* TIM17 */ + +#if defined(SAI1) +#define __HAL_RCC_SAI1_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB2SMENR, RCC_APB2SMENR_SAI1SMEN) == 0U) +#endif /* SAI1 */ + +#if defined(SAI2) +#define __HAL_RCC_SAI2_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB2SMENR, RCC_APB2SMENR_SAI2SMEN) == 0U) +#endif /* SAI2 */ + +#if defined(DFSDM1_Filter0) +#define __HAL_RCC_DFSDM1_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB2SMENR, RCC_APB2SMENR_DFSDM1SMEN) == 0U) +#endif /* DFSDM1_Filter0 */ + +#if defined(LTDC) +#define __HAL_RCC_LTDC_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB2SMENR, RCC_APB2SMENR_LTDCSMEN) == 0U) +#endif /* LTDC */ + +#if defined(DSI) +#define __HAL_RCC_DSI_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB2SMENR, RCC_APB2SMENR_DSISMEN) == 0U) +#endif /* DSI */ + +/** + * @} + */ + +/** @defgroup RCC_Backup_Domain_Reset RCC Backup Domain Reset + * @{ + */ + +/** @brief Macros to force or release the Backup domain reset. + * @note This function resets the RTC peripheral (including the backup registers) + * and the RTC clock source selection in RCC_CSR register. + * @note The BKPSRAM is not affected by this reset. + * @retval None + */ +#define __HAL_RCC_BACKUPRESET_FORCE() SET_BIT(RCC->BDCR, RCC_BDCR_BDRST) + +#define __HAL_RCC_BACKUPRESET_RELEASE() CLEAR_BIT(RCC->BDCR, RCC_BDCR_BDRST) + +/** + * @} + */ + +/** @defgroup RCC_RTC_Clock_Configuration RCC RTC Clock Configuration + * @{ + */ + +/** @brief Macros to enable or disable the RTC clock. + * @note As the RTC is in the Backup domain and write access is denied to + * this domain after reset, you have to enable write access using + * HAL_PWR_EnableBkUpAccess() function before to configure the RTC + * (to be done once after reset). + * @note These macros must be used after the RTC clock source was selected. + * @retval None + */ +#define __HAL_RCC_RTC_ENABLE() SET_BIT(RCC->BDCR, RCC_BDCR_RTCEN) + +#define __HAL_RCC_RTC_DISABLE() CLEAR_BIT(RCC->BDCR, RCC_BDCR_RTCEN) + +/** + * @} + */ + +/** @brief Macros to enable or disable the Internal High Speed 16MHz oscillator (HSI). + * @note The HSI is stopped by hardware when entering STOP and STANDBY modes. + * It is used (enabled by hardware) as system clock source after startup + * from Reset, wakeup from STOP and STANDBY mode, or in case of failure + * of the HSE used directly or indirectly as system clock (if the Clock + * Security System CSS is enabled). + * @note HSI can not be stopped if it is used as system clock source. In this case, + * you have to select another source of the system clock then stop the HSI. + * @note After enabling the HSI, the application software should wait on HSIRDY + * flag to be set indicating that HSI clock is stable and can be used as + * system clock source. + * This parameter can be: ENABLE or DISABLE. + * @note When the HSI is stopped, HSIRDY flag goes low after 6 HSI oscillator + * clock cycles. + * @retval None + */ +#define __HAL_RCC_HSI_ENABLE() SET_BIT(RCC->CR, RCC_CR_HSION) + +#define __HAL_RCC_HSI_DISABLE() CLEAR_BIT(RCC->CR, RCC_CR_HSION) + +/** @brief Macro to adjust the Internal High Speed 16MHz oscillator (HSI) calibration value. + * @note The calibration is used to compensate for the variations in voltage + * and temperature that influence the frequency of the internal HSI RC. + * @param __HSICALIBRATIONVALUE__ specifies the calibration trimming value + * (default is RCC_HSICALIBRATION_DEFAULT). + * This parameter must be a number between 0 and 31 on STM32L43x/STM32L44x/STM32L47x/STM32L48x + * or between 0 and 127 on other devices. + * @retval None + */ +#define __HAL_RCC_HSI_CALIBRATIONVALUE_ADJUST(__HSICALIBRATIONVALUE__) \ + MODIFY_REG(RCC->ICSCR, RCC_ICSCR_HSITRIM, (__HSICALIBRATIONVALUE__) << RCC_ICSCR_HSITRIM_Pos) + +/** + * @brief Macros to enable or disable the wakeup the Internal High Speed oscillator (HSI) + * in parallel to the Internal Multi Speed oscillator (MSI) used at system wakeup. + * @note The enable of this function has not effect on the HSION bit. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +#define __HAL_RCC_HSIAUTOMATIC_START_ENABLE() SET_BIT(RCC->CR, RCC_CR_HSIASFS) + +#define __HAL_RCC_HSIAUTOMATIC_START_DISABLE() CLEAR_BIT(RCC->CR, RCC_CR_HSIASFS) + +/** + * @brief Macros to enable or disable the force of the Internal High Speed oscillator (HSI) + * in STOP mode to be quickly available as kernel clock for USARTs and I2Cs. + * @note Keeping the HSI ON in STOP mode allows to avoid slowing down the communication + * speed because of the HSI startup time. + * @note The enable of this function has not effect on the HSION bit. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +#define __HAL_RCC_HSISTOP_ENABLE() SET_BIT(RCC->CR, RCC_CR_HSIKERON) + +#define __HAL_RCC_HSISTOP_DISABLE() CLEAR_BIT(RCC->CR, RCC_CR_HSIKERON) + +/** + * @brief Macros to enable or disable the Internal Multi Speed oscillator (MSI). + * @note The MSI is stopped by hardware when entering STOP and STANDBY modes. + * It is used (enabled by hardware) as system clock source after + * startup from Reset, wakeup from STOP and STANDBY mode, or in case + * of failure of the HSE used directly or indirectly as system clock + * (if the Clock Security System CSS is enabled). + * @note MSI can not be stopped if it is used as system clock source. + * In this case, you have to select another source of the system + * clock then stop the MSI. + * @note After enabling the MSI, the application software should wait on + * MSIRDY flag to be set indicating that MSI clock is stable and can + * be used as system clock source. + * @note When the MSI is stopped, MSIRDY flag goes low after 6 MSI oscillator + * clock cycles. + * @retval None + */ +#define __HAL_RCC_MSI_ENABLE() SET_BIT(RCC->CR, RCC_CR_MSION) + +#define __HAL_RCC_MSI_DISABLE() CLEAR_BIT(RCC->CR, RCC_CR_MSION) + +/** @brief Macro Adjusts the Internal Multi Speed oscillator (MSI) calibration value. + * @note The calibration is used to compensate for the variations in voltage + * and temperature that influence the frequency of the internal MSI RC. + * Refer to the Application Note AN3300 for more details on how to + * calibrate the MSI. + * @param __MSICALIBRATIONVALUE__ specifies the calibration trimming value + * (default is RCC_MSICALIBRATION_DEFAULT). + * This parameter must be a number between 0 and 255. + * @retval None + */ +#define __HAL_RCC_MSI_CALIBRATIONVALUE_ADJUST(__MSICALIBRATIONVALUE__) \ + MODIFY_REG(RCC->ICSCR, RCC_ICSCR_MSITRIM, (__MSICALIBRATIONVALUE__) << RCC_ICSCR_MSITRIM_Pos) + +/** + * @brief Macro configures the Internal Multi Speed oscillator (MSI) clock range in run mode + * @note After restart from Reset , the MSI clock is around 4 MHz. + * After stop the startup clock can be MSI (at any of its possible + * frequencies, the one that was used before entering stop mode) or HSI. + * After Standby its frequency can be selected between 4 possible values + * (1, 2, 4 or 8 MHz). + * @note MSIRANGE can be modified when MSI is OFF (MSION=0) or when MSI is ready + * (MSIRDY=1). + * @note The MSI clock range after reset can be modified on the fly. + * @param __MSIRANGEVALUE__ specifies the MSI clock range. + * This parameter must be one of the following values: + * @arg @ref RCC_MSIRANGE_0 MSI clock is around 100 KHz + * @arg @ref RCC_MSIRANGE_1 MSI clock is around 200 KHz + * @arg @ref RCC_MSIRANGE_2 MSI clock is around 400 KHz + * @arg @ref RCC_MSIRANGE_3 MSI clock is around 800 KHz + * @arg @ref RCC_MSIRANGE_4 MSI clock is around 1 MHz + * @arg @ref RCC_MSIRANGE_5 MSI clock is around 2 MHz + * @arg @ref RCC_MSIRANGE_6 MSI clock is around 4 MHz (default after Reset) + * @arg @ref RCC_MSIRANGE_7 MSI clock is around 8 MHz + * @arg @ref RCC_MSIRANGE_8 MSI clock is around 16 MHz + * @arg @ref RCC_MSIRANGE_9 MSI clock is around 24 MHz + * @arg @ref RCC_MSIRANGE_10 MSI clock is around 32 MHz + * @arg @ref RCC_MSIRANGE_11 MSI clock is around 48 MHz + * @retval None + */ +#define __HAL_RCC_MSI_RANGE_CONFIG(__MSIRANGEVALUE__) \ + do { \ + SET_BIT(RCC->CR, RCC_CR_MSIRGSEL); \ + MODIFY_REG(RCC->CR, RCC_CR_MSIRANGE, (__MSIRANGEVALUE__)); \ + } while(0) + +/** + * @brief Macro configures the Internal Multi Speed oscillator (MSI) clock range after Standby mode + * After Standby its frequency can be selected between 4 possible values (1, 2, 4 or 8 MHz). + * @param __MSIRANGEVALUE__ specifies the MSI clock range. + * This parameter must be one of the following values: + * @arg @ref RCC_MSIRANGE_4 MSI clock is around 1 MHz + * @arg @ref RCC_MSIRANGE_5 MSI clock is around 2 MHz + * @arg @ref RCC_MSIRANGE_6 MSI clock is around 4 MHz (default after Reset) + * @arg @ref RCC_MSIRANGE_7 MSI clock is around 8 MHz + * @retval None + */ +#define __HAL_RCC_MSI_STANDBY_RANGE_CONFIG(__MSIRANGEVALUE__) \ + MODIFY_REG(RCC->CSR, RCC_CSR_MSISRANGE, (__MSIRANGEVALUE__) << 4U) + +/** @brief Macro to get the Internal Multi Speed oscillator (MSI) clock range in run mode + * @retval MSI clock range. + * This parameter must be one of the following values: + * @arg @ref RCC_MSIRANGE_0 MSI clock is around 100 KHz + * @arg @ref RCC_MSIRANGE_1 MSI clock is around 200 KHz + * @arg @ref RCC_MSIRANGE_2 MSI clock is around 400 KHz + * @arg @ref RCC_MSIRANGE_3 MSI clock is around 800 KHz + * @arg @ref RCC_MSIRANGE_4 MSI clock is around 1 MHz + * @arg @ref RCC_MSIRANGE_5 MSI clock is around 2 MHz + * @arg @ref RCC_MSIRANGE_6 MSI clock is around 4 MHz (default after Reset) + * @arg @ref RCC_MSIRANGE_7 MSI clock is around 8 MHz + * @arg @ref RCC_MSIRANGE_8 MSI clock is around 16 MHz + * @arg @ref RCC_MSIRANGE_9 MSI clock is around 24 MHz + * @arg @ref RCC_MSIRANGE_10 MSI clock is around 32 MHz + * @arg @ref RCC_MSIRANGE_11 MSI clock is around 48 MHz + */ +#define __HAL_RCC_GET_MSI_RANGE() \ + ((READ_BIT(RCC->CR, RCC_CR_MSIRGSEL) != 0U) ? \ + READ_BIT(RCC->CR, RCC_CR_MSIRANGE) : \ + (READ_BIT(RCC->CSR, RCC_CSR_MSISRANGE) >> 4U)) + +/** @brief Macros to enable or disable the Internal Low Speed oscillator (LSI). + * @note After enabling the LSI, the application software should wait on + * LSIRDY flag to be set indicating that LSI clock is stable and can + * be used to clock the IWDG and/or the RTC. + * @note LSI can not be disabled if the IWDG is running. + * @note When the LSI is stopped, LSIRDY flag goes low after 6 LSI oscillator + * clock cycles. + * @retval None + */ +#define __HAL_RCC_LSI_ENABLE() SET_BIT(RCC->CSR, RCC_CSR_LSION) + +#define __HAL_RCC_LSI_DISABLE() CLEAR_BIT(RCC->CSR, RCC_CSR_LSION) + +/** + * @brief Macro to configure the External High Speed oscillator (HSE). + * @note Transition HSE Bypass to HSE On and HSE On to HSE Bypass are not + * supported by this macro. User should request a transition to HSE Off + * first and then HSE On or HSE Bypass. + * @note After enabling the HSE (RCC_HSE_ON or RCC_HSE_Bypass), the application + * software should wait on HSERDY flag to be set indicating that HSE clock + * is stable and can be used to clock the PLL and/or system clock. + * @note HSE state can not be changed if it is used directly or through the + * PLL as system clock. In this case, you have to select another source + * of the system clock then change the HSE state (ex. disable it). + * @note The HSE is stopped by hardware when entering STOP and STANDBY modes. + * @note This function reset the CSSON bit, so if the clock security system(CSS) + * was previously enabled you have to enable it again after calling this + * function. + * @param __STATE__ specifies the new state of the HSE. + * This parameter can be one of the following values: + * @arg @ref RCC_HSE_OFF Turn OFF the HSE oscillator, HSERDY flag goes low after + * 6 HSE oscillator clock cycles. + * @arg @ref RCC_HSE_ON Turn ON the HSE oscillator. + * @arg @ref RCC_HSE_BYPASS HSE oscillator bypassed with external clock. + * @retval None + */ +#define __HAL_RCC_HSE_CONFIG(__STATE__) \ + do { \ + if((__STATE__) == RCC_HSE_ON) \ + { \ + SET_BIT(RCC->CR, RCC_CR_HSEON); \ + } \ + else if((__STATE__) == RCC_HSE_BYPASS) \ + { \ + SET_BIT(RCC->CR, RCC_CR_HSEBYP); \ + SET_BIT(RCC->CR, RCC_CR_HSEON); \ + } \ + else \ + { \ + CLEAR_BIT(RCC->CR, RCC_CR_HSEON); \ + CLEAR_BIT(RCC->CR, RCC_CR_HSEBYP); \ + } \ + } while(0) + +/** + * @brief Macro to configure the External Low Speed oscillator (LSE). + * @note Transitions LSE Bypass to LSE On and LSE On to LSE Bypass are not + * supported by this macro. User should request a transition to LSE Off + * first and then LSE On or LSE Bypass. + * @note As the LSE is in the Backup domain and write access is denied to + * this domain after reset, you have to enable write access using + * HAL_PWR_EnableBkUpAccess() function before to configure the LSE + * (to be done once after reset). + * @note After enabling the LSE (RCC_LSE_ON or RCC_LSE_BYPASS), the application + * software should wait on LSERDY flag to be set indicating that LSE clock + * is stable and can be used to clock the RTC. + * @param __STATE__ specifies the new state of the LSE. + * This parameter can be one of the following values: + * @arg @ref RCC_LSE_OFF Turn OFF the LSE oscillator, LSERDY flag goes low after + * 6 LSE oscillator clock cycles. + * @arg @ref RCC_LSE_ON Turn ON the LSE oscillator. + * @arg @ref RCC_LSE_BYPASS LSE oscillator bypassed with external clock. + * @retval None + */ +#define __HAL_RCC_LSE_CONFIG(__STATE__) \ + do { \ + if((__STATE__) == RCC_LSE_ON) \ + { \ + SET_BIT(RCC->BDCR, RCC_BDCR_LSEON); \ + } \ + else if((__STATE__) == RCC_LSE_BYPASS) \ + { \ + SET_BIT(RCC->BDCR, RCC_BDCR_LSEBYP); \ + SET_BIT(RCC->BDCR, RCC_BDCR_LSEON); \ + } \ + else \ + { \ + CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEON); \ + CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEBYP); \ + } \ + } while(0) + +#if defined(RCC_HSI48_SUPPORT) + +/** @brief Macros to enable or disable the Internal High Speed 48MHz oscillator (HSI48). + * @note The HSI48 is stopped by hardware when entering STOP and STANDBY modes. + * @note After enabling the HSI48, the application software should wait on HSI48RDY + * flag to be set indicating that HSI48 clock is stable. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +#define __HAL_RCC_HSI48_ENABLE() SET_BIT(RCC->CRRCR, RCC_CRRCR_HSI48ON) + +#define __HAL_RCC_HSI48_DISABLE() CLEAR_BIT(RCC->CRRCR, RCC_CRRCR_HSI48ON) + +#endif /* RCC_HSI48_SUPPORT */ + +/** @brief Macros to configure the RTC clock (RTCCLK). + * @note As the RTC clock configuration bits are in the Backup domain and write + * access is denied to this domain after reset, you have to enable write + * access using the Power Backup Access macro before to configure + * the RTC clock source (to be done once after reset). + * @note Once the RTC clock is configured it cannot be changed unless the + * Backup domain is reset using __HAL_RCC_BACKUPRESET_FORCE() macro, or by + * a Power On Reset (POR). + * + * @param __RTC_CLKSOURCE__ specifies the RTC clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_RTCCLKSOURCE_NONE No clock selected as RTC clock. + * @arg @ref RCC_RTCCLKSOURCE_LSE LSE selected as RTC clock. + * @arg @ref RCC_RTCCLKSOURCE_LSI LSI selected as RTC clock. + * @arg @ref RCC_RTCCLKSOURCE_HSE_DIV32 HSE clock divided by 32 selected + * + * @note If the LSE or LSI is used as RTC clock source, the RTC continues to + * work in STOP and STANDBY modes, and can be used as wakeup source. + * However, when the HSE clock is used as RTC clock source, the RTC + * cannot be used in STOP and STANDBY modes. + * @note The maximum input clock frequency for RTC is 1MHz (when using HSE as + * RTC clock source). + * @retval None + */ +#define __HAL_RCC_RTC_CONFIG(__RTC_CLKSOURCE__) \ + MODIFY_REG( RCC->BDCR, RCC_BDCR_RTCSEL, (__RTC_CLKSOURCE__)) + + +/** @brief Macro to get the RTC clock source. + * @retval The returned value can be one of the following: + * @arg @ref RCC_RTCCLKSOURCE_NONE No clock selected as RTC clock. + * @arg @ref RCC_RTCCLKSOURCE_LSE LSE selected as RTC clock. + * @arg @ref RCC_RTCCLKSOURCE_LSI LSI selected as RTC clock. + * @arg @ref RCC_RTCCLKSOURCE_HSE_DIV32 HSE clock divided by 32 selected + */ +#define __HAL_RCC_GET_RTC_SOURCE() (READ_BIT(RCC->BDCR, RCC_BDCR_RTCSEL)) + +/** @brief Macros to enable or disable the main PLL. + * @note After enabling the main PLL, the application software should wait on + * PLLRDY flag to be set indicating that PLL clock is stable and can + * be used as system clock source. + * @note The main PLL can not be disabled if it is used as system clock source + * @note The main PLL is disabled by hardware when entering STOP and STANDBY modes. + * @retval None + */ +#define __HAL_RCC_PLL_ENABLE() SET_BIT(RCC->CR, RCC_CR_PLLON) + +#define __HAL_RCC_PLL_DISABLE() CLEAR_BIT(RCC->CR, RCC_CR_PLLON) + +/** @brief Macro to configure the PLL clock source. + * @note This function must be used only when the main PLL is disabled. + * @param __PLLSOURCE__ specifies the PLL entry clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_PLLSOURCE_NONE No clock selected as PLL clock entry + * @arg @ref RCC_PLLSOURCE_MSI MSI oscillator clock selected as PLL clock entry + * @arg @ref RCC_PLLSOURCE_HSI HSI oscillator clock selected as PLL clock entry + * @arg @ref RCC_PLLSOURCE_HSE HSE oscillator clock selected as PLL clock entry + * @note This clock source is common for the main PLL and audio PLL (PLLSAI1 and PLLSAI2). + * @retval None + * + */ +#define __HAL_RCC_PLL_PLLSOURCE_CONFIG(__PLLSOURCE__) \ + MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC, (__PLLSOURCE__)) + +/** @brief Macro to configure the PLL source division factor M. + * @note This function must be used only when the main PLL is disabled. + * @param __PLLM__ specifies the division factor for PLL VCO input clock + * This parameter must be a number between Min_Data = 1 and Max_Data = 16 on STM32L4Rx/STM32L4Sx devices. + * This parameter must be a number between Min_Data = 1 and Max_Data = 8 on other devices. + * @note You have to set the PLLM parameter correctly to ensure that the VCO input + * frequency ranges from 4 to 16 MHz. It is recommended to select a frequency + * of 16 MHz to limit PLL jitter. + * @retval None + * + */ +#define __HAL_RCC_PLL_PLLM_CONFIG(__PLLM__) \ + MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLM, ((__PLLM__) - 1) << 4U) + +/** + * @brief Macro to configure the main PLL clock source, multiplication and division factors. + * @note This function must be used only when the main PLL is disabled. + * + * @param __PLLSOURCE__ specifies the PLL entry clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_PLLSOURCE_NONE No clock selected as PLL clock entry + * @arg @ref RCC_PLLSOURCE_MSI MSI oscillator clock selected as PLL clock entry + * @arg @ref RCC_PLLSOURCE_HSI HSI oscillator clock selected as PLL clock entry + * @arg @ref RCC_PLLSOURCE_HSE HSE oscillator clock selected as PLL clock entry + * @note This clock source is common for the main PLL and audio PLL (PLLSAI1 and PLLSAI2). + * + * @param __PLLM__ specifies the division factor for PLL VCO input clock. + * This parameter must be a number between Min_Data = 1 and Max_Data = 16 on STM32L4Rx/STM32L4Sx devices. + * This parameter must be a number between Min_Data = 1 and Max_Data = 8 on other devices. + * @note You have to set the PLLM parameter correctly to ensure that the VCO input + * frequency ranges from 4 to 16 MHz. It is recommended to select a frequency + * of 16 MHz to limit PLL jitter. + * + * @param __PLLN__ specifies the multiplication factor for PLL VCO output clock. + * This parameter must be a number between 8 and 86. + * @note You have to set the PLLN parameter correctly to ensure that the VCO + * output frequency is between 64 and 344 MHz. + * + * @param __PLLP__ specifies the division factor for SAI clock when SAI available on device. + * This parameter must be a number in the range (7 or 17) for STM32L47x/STM32L48x + * else (2 to 31). + * + * @param __PLLQ__ specifies the division factor for OTG FS, SDMMC1 and RNG clocks. + * This parameter must be in the range (2, 4, 6 or 8). + * @note If the USB OTG FS is used in your application, you have to set the + * PLLQ parameter correctly to have 48 MHz clock for the USB. However, + * the SDMMC1 and RNG need a frequency lower than or equal to 48 MHz to work + * correctly. + * @param __PLLR__ specifies the division factor for the main system clock. + * @note You have to set the PLLR parameter correctly to not exceed 80MHZ. + * This parameter must be in the range (2, 4, 6 or 8). + * @retval None + */ +#if defined(RCC_PLLP_DIV_2_31_SUPPORT) + +#define __HAL_RCC_PLL_CONFIG(__PLLSOURCE__, __PLLM__, __PLLN__, __PLLP__, __PLLQ__,__PLLR__ ) \ + MODIFY_REG(RCC->PLLCFGR, \ + (RCC_PLLCFGR_PLLSRC | RCC_PLLCFGR_PLLM | RCC_PLLCFGR_PLLN | \ + RCC_PLLCFGR_PLLQ | RCC_PLLCFGR_PLLR | RCC_PLLCFGR_PLLP | RCC_PLLCFGR_PLLPDIV), \ + ((__PLLSOURCE__) | \ + (((__PLLM__) - 1U) << RCC_PLLCFGR_PLLM_Pos) | \ + ((__PLLN__) << RCC_PLLCFGR_PLLN_Pos) | \ + ((((__PLLQ__) >> 1U) - 1U) << RCC_PLLCFGR_PLLQ_Pos) | \ + ((((__PLLR__) >> 1U) - 1U) << RCC_PLLCFGR_PLLR_Pos) | \ + ((uint32_t)(__PLLP__) << RCC_PLLCFGR_PLLPDIV_Pos))) + +#elif defined(RCC_PLLP_SUPPORT) + +#define __HAL_RCC_PLL_CONFIG(__PLLSOURCE__, __PLLM__, __PLLN__, __PLLP__, __PLLQ__,__PLLR__ ) \ + MODIFY_REG(RCC->PLLCFGR, \ + (RCC_PLLCFGR_PLLSRC | RCC_PLLCFGR_PLLM | RCC_PLLCFGR_PLLN | \ + RCC_PLLCFGR_PLLQ | RCC_PLLCFGR_PLLR | RCC_PLLCFGR_PLLP), \ + ((__PLLSOURCE__) | \ + (((__PLLM__) - 1U) << RCC_PLLCFGR_PLLM_Pos) | \ + ((__PLLN__) << RCC_PLLCFGR_PLLN_Pos) | \ + ((((__PLLQ__) >> 1U) - 1U) << RCC_PLLCFGR_PLLQ_Pos) | \ + ((((__PLLR__) >> 1U) - 1U) << RCC_PLLCFGR_PLLR_Pos) | \ + (((__PLLP__) >> 4U) << RCC_PLLCFGR_PLLP_Pos))) + +#else + +#define __HAL_RCC_PLL_CONFIG(__PLLSOURCE__, __PLLM__, __PLLN__, __PLLQ__,__PLLR__ ) \ + MODIFY_REG(RCC->PLLCFGR, \ + (RCC_PLLCFGR_PLLSRC | RCC_PLLCFGR_PLLM | RCC_PLLCFGR_PLLN | \ + RCC_PLLCFGR_PLLQ | RCC_PLLCFGR_PLLR), \ + ((__PLLSOURCE__) | \ + (((__PLLM__) - 1U) << RCC_PLLCFGR_PLLM_Pos) | \ + ((__PLLN__) << RCC_PLLCFGR_PLLN_Pos) | \ + ((((__PLLQ__) >> 1U) - 1U) << RCC_PLLCFGR_PLLQ_Pos) | \ + ((((__PLLR__) >> 1U) - 1U) << RCC_PLLCFGR_PLLR_Pos))) + +#endif /* RCC_PLLP_DIV_2_31_SUPPORT */ + +/** @brief Macro to get the oscillator used as PLL clock source. + * @retval The oscillator used as PLL clock source. The returned value can be one + * of the following: + * - RCC_PLLSOURCE_NONE: No oscillator is used as PLL clock source. + * - RCC_PLLSOURCE_MSI: MSI oscillator is used as PLL clock source. + * - RCC_PLLSOURCE_HSI: HSI oscillator is used as PLL clock source. + * - RCC_PLLSOURCE_HSE: HSE oscillator is used as PLL clock source. + */ +#define __HAL_RCC_GET_PLL_OSCSOURCE() (READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC)) + +/** + * @brief Enable or disable each clock output (RCC_PLL_SYSCLK, RCC_PLL_48M1CLK, RCC_PLL_SAI3CLK) + * @note Enabling/disabling clock outputs RCC_PLL_SAI3CLK and RCC_PLL_48M1CLK can be done at anytime + * without the need to stop the PLL in order to save power. But RCC_PLL_SYSCLK cannot + * be stopped if used as System Clock. + * @param __PLLCLOCKOUT__ specifies the PLL clock to be output. + * This parameter can be one or a combination of the following values: + * @arg @ref RCC_PLL_SAI3CLK This clock is used to generate an accurate clock to achieve + * high-quality audio performance on SAI interface in case. + * @arg @ref RCC_PLL_48M1CLK This Clock is used to generate the clock for the USB OTG FS (48 MHz), + * the random analog generator (<=48 MHz) and the SDMMC1 (<= 48 MHz). + * @arg @ref RCC_PLL_SYSCLK This Clock is used to generate the high speed system clock (up to 80MHz) + * @retval None + */ +#define __HAL_RCC_PLLCLKOUT_ENABLE(__PLLCLOCKOUT__) SET_BIT(RCC->PLLCFGR, (__PLLCLOCKOUT__)) + +#define __HAL_RCC_PLLCLKOUT_DISABLE(__PLLCLOCKOUT__) CLEAR_BIT(RCC->PLLCFGR, (__PLLCLOCKOUT__)) + +/** + * @brief Get clock output enable status (RCC_PLL_SYSCLK, RCC_PLL_48M1CLK, RCC_PLL_SAI3CLK) + * @param __PLLCLOCKOUT__ specifies the output PLL clock to be checked. + * This parameter can be one of the following values: + * @arg @ref RCC_PLL_SAI3CLK This clock is used to generate an accurate clock to achieve + * high-quality audio performance on SAI interface in case. + * @arg @ref RCC_PLL_48M1CLK This Clock is used to generate the clock for the USB OTG FS (48 MHz), + * the random analog generator (<=48 MHz) and the SDMMC1 (<= 48 MHz). + * @arg @ref RCC_PLL_SYSCLK This Clock is used to generate the high speed system clock (up to 80MHz) + * @retval SET / RESET + */ +#define __HAL_RCC_GET_PLLCLKOUT_CONFIG(__PLLCLOCKOUT__) READ_BIT(RCC->PLLCFGR, (__PLLCLOCKOUT__)) + +/** + * @brief Macro to configure the system clock source. + * @param __SYSCLKSOURCE__ specifies the system clock source. + * This parameter can be one of the following values: + * - RCC_SYSCLKSOURCE_MSI: MSI oscillator is used as system clock source. + * - RCC_SYSCLKSOURCE_HSI: HSI oscillator is used as system clock source. + * - RCC_SYSCLKSOURCE_HSE: HSE oscillator is used as system clock source. + * - RCC_SYSCLKSOURCE_PLLCLK: PLL output is used as system clock source. + * @retval None + */ +#define __HAL_RCC_SYSCLK_CONFIG(__SYSCLKSOURCE__) \ + MODIFY_REG(RCC->CFGR, RCC_CFGR_SW, (__SYSCLKSOURCE__)) + +/** @brief Macro to get the clock source used as system clock. + * @retval The clock source used as system clock. The returned value can be one + * of the following: + * - RCC_SYSCLKSOURCE_STATUS_MSI: MSI used as system clock. + * - RCC_SYSCLKSOURCE_STATUS_HSI: HSI used as system clock. + * - RCC_SYSCLKSOURCE_STATUS_HSE: HSE used as system clock. + * - RCC_SYSCLKSOURCE_STATUS_PLLCLK: PLL used as system clock. + */ +#define __HAL_RCC_GET_SYSCLK_SOURCE() (READ_BIT(RCC->CFGR, RCC_CFGR_SWS)) + +/** + * @brief Macro to configure the External Low Speed oscillator (LSE) drive capability. + * @note As the LSE is in the Backup domain and write access is denied to + * this domain after reset, you have to enable write access using + * HAL_PWR_EnableBkUpAccess() function before to configure the LSE + * (to be done once after reset). + * @param __LSEDRIVE__ specifies the new state of the LSE drive capability. + * This parameter can be one of the following values: + * @arg @ref RCC_LSEDRIVE_LOW LSE oscillator low drive capability. + * @arg @ref RCC_LSEDRIVE_MEDIUMLOW LSE oscillator medium low drive capability. + * @arg @ref RCC_LSEDRIVE_MEDIUMHIGH LSE oscillator medium high drive capability. + * @arg @ref RCC_LSEDRIVE_HIGH LSE oscillator high drive capability. + * @retval None + */ +#define __HAL_RCC_LSEDRIVE_CONFIG(__LSEDRIVE__) \ + MODIFY_REG(RCC->BDCR, RCC_BDCR_LSEDRV, (__LSEDRIVE__)) + +/** + * @brief Macro to configure the wake up from stop clock. + * @param __STOPWUCLK__ specifies the clock source used after wake up from stop. + * This parameter can be one of the following values: + * @arg @ref RCC_STOP_WAKEUPCLOCK_MSI MSI selected as system clock source + * @arg @ref RCC_STOP_WAKEUPCLOCK_HSI HSI selected as system clock source + * @retval None + */ +#define __HAL_RCC_WAKEUPSTOP_CLK_CONFIG(__STOPWUCLK__) \ + MODIFY_REG(RCC->CFGR, RCC_CFGR_STOPWUCK, (__STOPWUCLK__)) + + +/** @brief Macro to configure the MCO clock. + * @param __MCOCLKSOURCE__ specifies the MCO clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_MCO1SOURCE_NOCLOCK MCO output disabled + * @arg @ref RCC_MCO1SOURCE_SYSCLK System clock selected as MCO source + * @arg @ref RCC_MCO1SOURCE_MSI MSI clock selected as MCO source + * @arg @ref RCC_MCO1SOURCE_HSI HSI clock selected as MCO source + * @arg @ref RCC_MCO1SOURCE_HSE HSE clock selected as MCO source + * @arg @ref RCC_MCO1SOURCE_PLLCLK Main PLL clock selected as MCO source + * @arg @ref RCC_MCO1SOURCE_LSI LSI clock selected as MCO source + * @arg @ref RCC_MCO1SOURCE_LSE LSE clock selected as MCO source + @if STM32L443xx + * @arg @ref RCC_MCO1SOURCE_HSI48 HSI48 clock selected as MCO source for devices with HSI48 + @endif + @if STM32L4A6xx + * @arg @ref RCC_MCO1SOURCE_HSI48 HSI48 clock selected as MCO source for devices with HSI48 + @endif + * @param __MCODIV__ specifies the MCO clock prescaler. + * This parameter can be one of the following values: + * @arg @ref RCC_MCODIV_1 MCO clock source is divided by 1 + * @arg @ref RCC_MCODIV_2 MCO clock source is divided by 2 + * @arg @ref RCC_MCODIV_4 MCO clock source is divided by 4 + * @arg @ref RCC_MCODIV_8 MCO clock source is divided by 8 + * @arg @ref RCC_MCODIV_16 MCO clock source is divided by 16 + */ +#define __HAL_RCC_MCO1_CONFIG(__MCOCLKSOURCE__, __MCODIV__) \ + MODIFY_REG(RCC->CFGR, (RCC_CFGR_MCOSEL | RCC_CFGR_MCOPRE), ((__MCOCLKSOURCE__) | (__MCODIV__))) + +/** @defgroup RCC_Flags_Interrupts_Management Flags Interrupts Management + * @brief macros to manage the specified RCC Flags and interrupts. + * @{ + */ + +/** @brief Enable RCC interrupt(s). + * @param __INTERRUPT__ specifies the RCC interrupt source(s) to be enabled. + * This parameter can be any combination of the following values: + * @arg @ref RCC_IT_LSIRDY LSI ready interrupt + * @arg @ref RCC_IT_LSERDY LSE ready interrupt + * @arg @ref RCC_IT_MSIRDY HSI ready interrupt + * @arg @ref RCC_IT_HSIRDY HSI ready interrupt + * @arg @ref RCC_IT_HSERDY HSE ready interrupt + * @arg @ref RCC_IT_PLLRDY Main PLL ready interrupt + * @arg @ref RCC_IT_PLLSAI1RDY PLLSAI1 ready interrupt for devices with PLLSAI1 + * @arg @ref RCC_IT_PLLSAI2RDY PLLSAI2 ready interrupt for devices with PLLSAI2 + * @arg @ref RCC_IT_LSECSS LSE Clock security system interrupt + @if STM32L443xx + * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt for devices with HSI48 + @endif + @if STM32L4A6xx + * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt for devices with HSI48 + @endif + * @retval None + */ +#define __HAL_RCC_ENABLE_IT(__INTERRUPT__) SET_BIT(RCC->CIER, (__INTERRUPT__)) + +/** @brief Disable RCC interrupt(s). + * @param __INTERRUPT__ specifies the RCC interrupt source(s) to be disabled. + * This parameter can be any combination of the following values: + * @arg @ref RCC_IT_LSIRDY LSI ready interrupt + * @arg @ref RCC_IT_LSERDY LSE ready interrupt + * @arg @ref RCC_IT_MSIRDY HSI ready interrupt + * @arg @ref RCC_IT_HSIRDY HSI ready interrupt + * @arg @ref RCC_IT_HSERDY HSE ready interrupt + * @arg @ref RCC_IT_PLLRDY Main PLL ready interrupt + * @arg @ref RCC_IT_PLLSAI1RDY PLLSAI1 ready interrupt for devices with PLLSAI1 + * @arg @ref RCC_IT_PLLSAI2RDY PLLSAI2 ready interrupt for devices with PLLSAI2 + * @arg @ref RCC_IT_LSECSS LSE Clock security system interrupt + @if STM32L443xx + * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt for devices with HSI48 + @endif + @if STM32L4A6xx + * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt for devices with HSI48 + @endif + * @retval None + */ +#define __HAL_RCC_DISABLE_IT(__INTERRUPT__) CLEAR_BIT(RCC->CIER, (__INTERRUPT__)) + +/** @brief Clear the RCC's interrupt pending bits. + * @param __INTERRUPT__ specifies the interrupt pending bit to clear. + * This parameter can be any combination of the following values: + * @arg @ref RCC_IT_LSIRDY LSI ready interrupt + * @arg @ref RCC_IT_LSERDY LSE ready interrupt + * @arg @ref RCC_IT_MSIRDY MSI ready interrupt + * @arg @ref RCC_IT_HSIRDY HSI ready interrupt + * @arg @ref RCC_IT_HSERDY HSE ready interrupt + * @arg @ref RCC_IT_PLLRDY Main PLL ready interrupt + * @arg @ref RCC_IT_PLLSAI1RDY PLLSAI1 ready interrupt for devices with PLLSAI1 + * @arg @ref RCC_IT_PLLSAI2RDY PLLSAI2 ready interrupt for devices with PLLSAI2 + * @arg @ref RCC_IT_CSS HSE Clock security system interrupt + * @arg @ref RCC_IT_LSECSS LSE Clock security system interrupt + @if STM32L443xx + * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt for devices with HSI48 + @endif + @if STM32L4A6xx + * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt for devices with HSI48 + @endif + * @retval None + */ +#define __HAL_RCC_CLEAR_IT(__INTERRUPT__) WRITE_REG(RCC->CICR, (__INTERRUPT__)) + +/** @brief Check whether the RCC interrupt has occurred or not. + * @param __INTERRUPT__ specifies the RCC interrupt source to check. + * This parameter can be one of the following values: + * @arg @ref RCC_IT_LSIRDY LSI ready interrupt + * @arg @ref RCC_IT_LSERDY LSE ready interrupt + * @arg @ref RCC_IT_MSIRDY MSI ready interrupt + * @arg @ref RCC_IT_HSIRDY HSI ready interrupt + * @arg @ref RCC_IT_HSERDY HSE ready interrupt + * @arg @ref RCC_IT_PLLRDY Main PLL ready interrupt + * @arg @ref RCC_IT_PLLSAI1RDY PLLSAI1 ready interrupt for devices with PLLSAI1 + * @arg @ref RCC_IT_PLLSAI2RDY PLLSAI2 ready interrupt for devices with PLLSAI2 + * @arg @ref RCC_IT_CSS HSE Clock security system interrupt + * @arg @ref RCC_IT_LSECSS LSE Clock security system interrupt + @if STM32L443xx + * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt for devices with HSI48 + @endif + @if STM32L4A6xx + * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt for devices with HSI48 + @endif + * @retval The new state of __INTERRUPT__ (TRUE or FALSE). + */ +#define __HAL_RCC_GET_IT(__INTERRUPT__) (READ_BIT(RCC->CIFR, (__INTERRUPT__)) == (__INTERRUPT__)) + +/** @brief Set RMVF bit to clear the reset flags. + * The reset flags are: RCC_FLAG_FWRRST, RCC_FLAG_OBLRST, RCC_FLAG_PINRST, RCC_FLAG_BORRST, + * RCC_FLAG_SFTRST, RCC_FLAG_IWDGRST, RCC_FLAG_WWDGRST and RCC_FLAG_LPWRRST. + * @retval None + */ +#define __HAL_RCC_CLEAR_RESET_FLAGS() SET_BIT(RCC->CSR, RCC_CSR_RMVF) + +/** @brief Check whether the selected RCC flag is set or not. + * @param __FLAG__ specifies the flag to check. + * This parameter can be one of the following values: + * @arg @ref RCC_FLAG_MSIRDY MSI oscillator clock ready + * @arg @ref RCC_FLAG_HSIRDY HSI oscillator clock ready + * @arg @ref RCC_FLAG_HSERDY HSE oscillator clock ready + * @arg @ref RCC_FLAG_PLLRDY Main PLL clock ready + * @arg @ref RCC_FLAG_PLLSAI1RDY PLLSAI1 clock ready for devices with PLLSAI1 + * @arg @ref RCC_FLAG_PLLSAI2RDY PLLSAI2 clock ready for devices with PLLSAI2 + @if STM32L443xx + * @arg @ref RCC_FLAG_HSI48RDY HSI48 clock ready for devices with HSI48 + @endif + @if STM32L4A6xx + * @arg @ref RCC_FLAG_HSI48RDY HSI48 clock ready for devices with HSI48 + @endif + * @arg @ref RCC_FLAG_LSERDY LSE oscillator clock ready + * @arg @ref RCC_FLAG_LSECSSD Clock security system failure on LSE oscillator detection + * @arg @ref RCC_FLAG_LSIRDY LSI oscillator clock ready + * @arg @ref RCC_FLAG_BORRST BOR reset + * @arg @ref RCC_FLAG_OBLRST OBLRST reset + * @arg @ref RCC_FLAG_PINRST Pin reset + * @arg @ref RCC_FLAG_FWRST FIREWALL reset + * @arg @ref RCC_FLAG_SFTRST Software reset + * @arg @ref RCC_FLAG_IWDGRST Independent Watchdog reset + * @arg @ref RCC_FLAG_WWDGRST Window Watchdog reset + * @arg @ref RCC_FLAG_LPWRRST Low Power reset + * @retval The new state of __FLAG__ (TRUE or FALSE). + */ +#if defined(RCC_HSI48_SUPPORT) +#define __HAL_RCC_GET_FLAG(__FLAG__) (((((((__FLAG__) >> 5U) == 1U) ? RCC->CR : \ + ((((__FLAG__) >> 5U) == 4U) ? RCC->CRRCR : \ + ((((__FLAG__) >> 5U) == 2U) ? RCC->BDCR : \ + ((((__FLAG__) >> 5U) == 3U) ? RCC->CSR : RCC->CIFR)))) & \ + (1U << ((__FLAG__) & RCC_FLAG_MASK))) != 0U) ? 1U : 0U) +#else +#define __HAL_RCC_GET_FLAG(__FLAG__) (((((((__FLAG__) >> 5U) == 1U) ? RCC->CR : \ + ((((__FLAG__) >> 5U) == 2U) ? RCC->BDCR : \ + ((((__FLAG__) >> 5U) == 3U) ? RCC->CSR : RCC->CIFR))) & \ + (1U << ((__FLAG__) & RCC_FLAG_MASK))) != 0U) ? 1U : 0U) +#endif /* RCC_HSI48_SUPPORT */ + +/** + * @} + */ + +/** + * @} + */ + +/* Private constants ---------------------------------------------------------*/ +/** @defgroup RCC_Private_Constants RCC Private Constants + * @{ + */ +/* Defines used for Flags */ +#define CR_REG_INDEX 1U +#define BDCR_REG_INDEX 2U +#define CSR_REG_INDEX 3U +#if defined(RCC_HSI48_SUPPORT) +#define CRRCR_REG_INDEX 4U +#endif /* RCC_HSI48_SUPPORT */ + +#define RCC_FLAG_MASK 0x1FU + +/* Defines Oscillator Masks */ +#if defined(RCC_HSI48_SUPPORT) +#define RCC_OSCILLATORTYPE_ALL (RCC_OSCILLATORTYPE_HSE | RCC_OSCILLATORTYPE_HSI | RCC_OSCILLATORTYPE_HSI48 | RCC_OSCILLATORTYPE_MSI | RCC_OSCILLATORTYPE_LSI | RCC_OSCILLATORTYPE_LSE) /*!< All Oscillator to configure */ +#else +#define RCC_OSCILLATORTYPE_ALL (RCC_OSCILLATORTYPE_HSE | RCC_OSCILLATORTYPE_HSI | RCC_OSCILLATORTYPE_MSI | RCC_OSCILLATORTYPE_LSI | RCC_OSCILLATORTYPE_LSE) /*!< All Oscillator to configure */ +#endif /* RCC_HSI48_SUPPORT */ + +/** @defgroup RCC_Reset_Flag Reset Flag + * @{ + */ +#define RCC_RESET_FLAG_OBL RCC_CSR_OBLRSTF /*!< Option Byte Loader reset flag */ +#define RCC_RESET_FLAG_PIN RCC_CSR_PINRSTF /*!< PIN reset flag */ +#define RCC_RESET_FLAG_PWR RCC_CSR_BORRSTF /*!< BOR or POR/PDR reset flag */ +#define RCC_RESET_FLAG_SW RCC_CSR_SFTRSTF /*!< Software Reset flag */ +#define RCC_RESET_FLAG_IWDG RCC_CSR_IWDGRSTF /*!< Independent Watchdog reset flag */ +#define RCC_RESET_FLAG_WWDG RCC_CSR_WWDGRSTF /*!< Window watchdog reset flag */ +#define RCC_RESET_FLAG_LPWR RCC_CSR_LPWRRSTF /*!< Low power reset flag */ +#define RCC_RESET_FLAG_ALL (RCC_RESET_FLAG_OBL | RCC_RESET_FLAG_PIN | RCC_RESET_FLAG_PWR | \ + RCC_RESET_FLAG_SW | RCC_RESET_FLAG_IWDG | RCC_RESET_FLAG_WWDG | \ + RCC_RESET_FLAG_LPWR) +/** + * @} + */ + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @addtogroup RCC_Private_Macros + * @{ + */ + +#define IS_RCC_OSCILLATORTYPE(__OSCILLATOR__) (((__OSCILLATOR__) == RCC_OSCILLATORTYPE_NONE) || \ + (((__OSCILLATOR__) & ~RCC_OSCILLATORTYPE_ALL) == 0x00U)) + +#define IS_RCC_HSE(__HSE__) (((__HSE__) == RCC_HSE_OFF) || ((__HSE__) == RCC_HSE_ON) || \ + ((__HSE__) == RCC_HSE_BYPASS)) + +#if defined(RCC_BDCR_LSESYSDIS) +#define IS_RCC_LSE(__LSE__) (((__LSE__) == RCC_LSE_OFF) || ((__LSE__) == RCC_LSE_ON) || ((__LSE__) == RCC_LSE_BYPASS_RTC_ONLY) || \ + ((__LSE__) == RCC_LSE_ON_RTC_ONLY) || ((__LSE__) == RCC_LSE_BYPASS)) +#else +#define IS_RCC_LSE(__LSE__) (((__LSE__) == RCC_LSE_OFF) || ((__LSE__) == RCC_LSE_ON) || \ + ((__LSE__) == RCC_LSE_BYPASS)) +#endif /* RCC_BDCR_LSESYSDIS */ + +#define IS_RCC_HSI(__HSI__) (((__HSI__) == RCC_HSI_OFF) || ((__HSI__) == RCC_HSI_ON)) + +#define IS_RCC_HSI_CALIBRATION_VALUE(__VALUE__) ((__VALUE__) <= (RCC_ICSCR_HSITRIM >> RCC_ICSCR_HSITRIM_Pos)) + +#define IS_RCC_LSI(__LSI__) (((__LSI__) == RCC_LSI_OFF) || ((__LSI__) == RCC_LSI_ON)) + +#if defined(RCC_CSR_LSIPREDIV) +#define IS_RCC_LSIDIV(__LSIDIV__) (((__LSIDIV__) == RCC_LSI_DIV1) || ((__LSIDIV__) == RCC_LSI_DIV128)) +#endif /* RCC_CSR_LSIPREDIV */ + +#define IS_RCC_MSI(__MSI__) (((__MSI__) == RCC_MSI_OFF) || ((__MSI__) == RCC_MSI_ON)) + +#define IS_RCC_MSICALIBRATION_VALUE(__VALUE__) ((__VALUE__) <= 255U) + +#if defined(RCC_HSI48_SUPPORT) +#define IS_RCC_HSI48(__HSI48__) (((__HSI48__) == RCC_HSI48_OFF) || ((__HSI48__) == RCC_HSI48_ON)) +#endif /* RCC_HSI48_SUPPORT */ + +#define IS_RCC_PLL(__PLL__) (((__PLL__) == RCC_PLL_NONE) ||((__PLL__) == RCC_PLL_OFF) || \ + ((__PLL__) == RCC_PLL_ON)) + +#define IS_RCC_PLLSOURCE(__SOURCE__) (((__SOURCE__) == RCC_PLLSOURCE_NONE) || \ + ((__SOURCE__) == RCC_PLLSOURCE_MSI) || \ + ((__SOURCE__) == RCC_PLLSOURCE_HSI) || \ + ((__SOURCE__) == RCC_PLLSOURCE_HSE)) + +#if defined(RCC_PLLM_DIV_1_16_SUPPORT) +#define IS_RCC_PLLM_VALUE(__VALUE__) ((1U <= (__VALUE__)) && ((__VALUE__) <= 16U)) +#else +#define IS_RCC_PLLM_VALUE(__VALUE__) ((1U <= (__VALUE__)) && ((__VALUE__) <= 8U)) +#endif /*RCC_PLLM_DIV_1_16_SUPPORT */ + +#define IS_RCC_PLLN_VALUE(__VALUE__) ((8U <= (__VALUE__)) && ((__VALUE__) <= 86U)) + +#if defined(RCC_PLLP_DIV_2_31_SUPPORT) +#define IS_RCC_PLLP_VALUE(__VALUE__) (((__VALUE__) >= 2U) && ((__VALUE__) <= 31U)) +#else +#define IS_RCC_PLLP_VALUE(__VALUE__) (((__VALUE__) == 7U) || ((__VALUE__) == 17U)) +#endif /*RCC_PLLP_DIV_2_31_SUPPORT */ + +#define IS_RCC_PLLQ_VALUE(__VALUE__) (((__VALUE__) == 2U) || ((__VALUE__) == 4U) || \ + ((__VALUE__) == 6U) || ((__VALUE__) == 8U)) + +#define IS_RCC_PLLR_VALUE(__VALUE__) (((__VALUE__) == 2U) || ((__VALUE__) == 4U) || \ + ((__VALUE__) == 6U) || ((__VALUE__) == 8U)) + +#if defined(RCC_PLLSAI1_SUPPORT) +#define IS_RCC_PLLSAI1CLOCKOUT_VALUE(__VALUE__) (((((__VALUE__) & RCC_PLLSAI1_SAI1CLK) == RCC_PLLSAI1_SAI1CLK) || \ + (((__VALUE__) & RCC_PLLSAI1_48M2CLK) == RCC_PLLSAI1_48M2CLK) || \ + (((__VALUE__) & RCC_PLLSAI1_ADC1CLK) == RCC_PLLSAI1_ADC1CLK)) && \ + (((__VALUE__) & ~(RCC_PLLSAI1_SAI1CLK|RCC_PLLSAI1_48M2CLK|RCC_PLLSAI1_ADC1CLK)) == 0U)) +#endif /* RCC_PLLSAI1_SUPPORT */ + +#if defined(RCC_PLLSAI2_SUPPORT) +#if defined(STM32L471xx) || defined(STM32L475xx) || defined(STM32L476xx) || defined(STM32L485xx) || defined(STM32L486xx) || defined(STM32L496xx) || defined(STM32L4A6xx) +#define IS_RCC_PLLSAI2CLOCKOUT_VALUE(__VALUE__) (((((__VALUE__) & RCC_PLLSAI2_SAI2CLK) == RCC_PLLSAI2_SAI2CLK) || \ + (((__VALUE__) & RCC_PLLSAI2_ADC2CLK) == RCC_PLLSAI2_ADC2CLK)) && \ + (((__VALUE__) & ~(RCC_PLLSAI2_SAI2CLK|RCC_PLLSAI2_ADC2CLK)) == 0U)) +#elif defined(STM32L4P5xx) || defined(STM32L4Q5xx) || defined(STM32L4R5xx) || defined(STM32L4R7xx) || defined(STM32L4R9xx) || defined(STM32L4S5xx) || defined(STM32L4S7xx) || defined(STM32L4S9xx) +#define IS_RCC_PLLSAI2CLOCKOUT_VALUE(__VALUE__) (((((__VALUE__) & RCC_PLLSAI2_SAI2CLK) == RCC_PLLSAI2_SAI2CLK) || \ + (((__VALUE__) & RCC_PLLSAI2_DSICLK) == RCC_PLLSAI2_DSICLK) || \ + (((__VALUE__) & RCC_PLLSAI2_LTDCCLK) == RCC_PLLSAI2_LTDCCLK)) && \ + (((__VALUE__) & ~(RCC_PLLSAI2_SAI2CLK|RCC_PLLSAI2_DSICLK|RCC_PLLSAI2_LTDCCLK)) == 0U)) +#endif /* STM32L471xx || STM32L475xx || STM32L476xx || STM32L485xx || STM32L486xx || STM32L496xx || STM32L4A6xx */ +#endif /* RCC_PLLSAI2_SUPPORT */ + +#define IS_RCC_MSI_CLOCK_RANGE(__RANGE__) (((__RANGE__) == RCC_MSIRANGE_0) || \ + ((__RANGE__) == RCC_MSIRANGE_1) || \ + ((__RANGE__) == RCC_MSIRANGE_2) || \ + ((__RANGE__) == RCC_MSIRANGE_3) || \ + ((__RANGE__) == RCC_MSIRANGE_4) || \ + ((__RANGE__) == RCC_MSIRANGE_5) || \ + ((__RANGE__) == RCC_MSIRANGE_6) || \ + ((__RANGE__) == RCC_MSIRANGE_7) || \ + ((__RANGE__) == RCC_MSIRANGE_8) || \ + ((__RANGE__) == RCC_MSIRANGE_9) || \ + ((__RANGE__) == RCC_MSIRANGE_10) || \ + ((__RANGE__) == RCC_MSIRANGE_11)) + +#define IS_RCC_MSI_STANDBY_CLOCK_RANGE(__RANGE__) (((__RANGE__) == RCC_MSIRANGE_4) || \ + ((__RANGE__) == RCC_MSIRANGE_5) || \ + ((__RANGE__) == RCC_MSIRANGE_6) || \ + ((__RANGE__) == RCC_MSIRANGE_7)) + +#define IS_RCC_CLOCKTYPE(__CLK__) ((1U <= (__CLK__)) && ((__CLK__) <= 15U)) + +#define IS_RCC_SYSCLKSOURCE(__SOURCE__) (((__SOURCE__) == RCC_SYSCLKSOURCE_MSI) || \ + ((__SOURCE__) == RCC_SYSCLKSOURCE_HSI) || \ + ((__SOURCE__) == RCC_SYSCLKSOURCE_HSE) || \ + ((__SOURCE__) == RCC_SYSCLKSOURCE_PLLCLK)) + +#define IS_RCC_HCLK(__HCLK__) (((__HCLK__) == RCC_SYSCLK_DIV1) || ((__HCLK__) == RCC_SYSCLK_DIV2) || \ + ((__HCLK__) == RCC_SYSCLK_DIV4) || ((__HCLK__) == RCC_SYSCLK_DIV8) || \ + ((__HCLK__) == RCC_SYSCLK_DIV16) || ((__HCLK__) == RCC_SYSCLK_DIV64) || \ + ((__HCLK__) == RCC_SYSCLK_DIV128) || ((__HCLK__) == RCC_SYSCLK_DIV256) || \ + ((__HCLK__) == RCC_SYSCLK_DIV512)) + +#define IS_RCC_PCLK(__PCLK__) (((__PCLK__) == RCC_HCLK_DIV1) || ((__PCLK__) == RCC_HCLK_DIV2) || \ + ((__PCLK__) == RCC_HCLK_DIV4) || ((__PCLK__) == RCC_HCLK_DIV8) || \ + ((__PCLK__) == RCC_HCLK_DIV16)) + +#define IS_RCC_RTCCLKSOURCE(__SOURCE__) (((__SOURCE__) == RCC_RTCCLKSOURCE_NONE) || \ + ((__SOURCE__) == RCC_RTCCLKSOURCE_LSE) || \ + ((__SOURCE__) == RCC_RTCCLKSOURCE_LSI) || \ + ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV32)) + +#define IS_RCC_MCO(__MCOX__) ((__MCOX__) == RCC_MCO1) + +#if defined(RCC_HSI48_SUPPORT) +#define IS_RCC_MCO1SOURCE(__SOURCE__) (((__SOURCE__) == RCC_MCO1SOURCE_NOCLOCK) || \ + ((__SOURCE__) == RCC_MCO1SOURCE_SYSCLK) || \ + ((__SOURCE__) == RCC_MCO1SOURCE_MSI) || \ + ((__SOURCE__) == RCC_MCO1SOURCE_HSI) || \ + ((__SOURCE__) == RCC_MCO1SOURCE_HSE) || \ + ((__SOURCE__) == RCC_MCO1SOURCE_PLLCLK) || \ + ((__SOURCE__) == RCC_MCO1SOURCE_LSI) || \ + ((__SOURCE__) == RCC_MCO1SOURCE_LSE) || \ + ((__SOURCE__) == RCC_MCO1SOURCE_HSI48)) +#else +#define IS_RCC_MCO1SOURCE(__SOURCE__) (((__SOURCE__) == RCC_MCO1SOURCE_NOCLOCK) || \ + ((__SOURCE__) == RCC_MCO1SOURCE_SYSCLK) || \ + ((__SOURCE__) == RCC_MCO1SOURCE_MSI) || \ + ((__SOURCE__) == RCC_MCO1SOURCE_HSI) || \ + ((__SOURCE__) == RCC_MCO1SOURCE_HSE) || \ + ((__SOURCE__) == RCC_MCO1SOURCE_PLLCLK) || \ + ((__SOURCE__) == RCC_MCO1SOURCE_LSI) || \ + ((__SOURCE__) == RCC_MCO1SOURCE_LSE)) +#endif /* RCC_HSI48_SUPPORT */ + +#define IS_RCC_MCODIV(__DIV__) (((__DIV__) == RCC_MCODIV_1) || ((__DIV__) == RCC_MCODIV_2) || \ + ((__DIV__) == RCC_MCODIV_4) || ((__DIV__) == RCC_MCODIV_8) || \ + ((__DIV__) == RCC_MCODIV_16)) + +#define IS_RCC_LSE_DRIVE(__DRIVE__) (((__DRIVE__) == RCC_LSEDRIVE_LOW) || \ + ((__DRIVE__) == RCC_LSEDRIVE_MEDIUMLOW) || \ + ((__DRIVE__) == RCC_LSEDRIVE_MEDIUMHIGH) || \ + ((__DRIVE__) == RCC_LSEDRIVE_HIGH)) + +#define IS_RCC_STOP_WAKEUPCLOCK(__SOURCE__) (((__SOURCE__) == RCC_STOP_WAKEUPCLOCK_MSI) || \ + ((__SOURCE__) == RCC_STOP_WAKEUPCLOCK_HSI)) +/** + * @} + */ + +/* Include RCC HAL Extended module */ +#include "stm32l4xx_hal_rcc_ex.h" + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup RCC_Exported_Functions + * @{ + */ + + +/** @addtogroup RCC_Exported_Functions_Group1 + * @{ + */ + +/* Initialization and de-initialization functions ******************************/ +HAL_StatusTypeDef HAL_RCC_DeInit(void); +HAL_StatusTypeDef HAL_RCC_OscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct); +HAL_StatusTypeDef HAL_RCC_ClockConfig(RCC_ClkInitTypeDef *RCC_ClkInitStruct, uint32_t FLatency); + +/** + * @} + */ + +/** @addtogroup RCC_Exported_Functions_Group2 + * @{ + */ + +/* Peripheral Control functions ************************************************/ +void HAL_RCC_MCOConfig(uint32_t RCC_MCOx, uint32_t RCC_MCOSource, uint32_t RCC_MCODiv); +void HAL_RCC_EnableCSS(void); +uint32_t HAL_RCC_GetSysClockFreq(void); +uint32_t HAL_RCC_GetHCLKFreq(void); +uint32_t HAL_RCC_GetPCLK1Freq(void); +uint32_t HAL_RCC_GetPCLK2Freq(void); +void HAL_RCC_GetOscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct); +void HAL_RCC_GetClockConfig(RCC_ClkInitTypeDef *RCC_ClkInitStruct, uint32_t *pFLatency); +/* CSS NMI IRQ handler */ +void HAL_RCC_NMI_IRQHandler(void); +/* User Callbacks in non blocking mode (IT mode) */ +void HAL_RCC_CSSCallback(void); + +uint32_t HAL_RCC_GetResetSource(void); +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32L4xx_HAL_RCC_H */ + diff --git a/CablePositioning_IAP_V1.0/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_rcc_ex.h b/CablePositioning_IAP_V1.0/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_rcc_ex.h index adc3fb7..e0db863 100644 --- a/CablePositioning_IAP_V1.0/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_rcc_ex.h +++ b/CablePositioning_IAP_V1.0/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_rcc_ex.h @@ -1,3045 +1,3045 @@ -/** - ****************************************************************************** - * @file stm32l4xx_hal_rcc_ex.h - * @author MCD Application Team - * @brief Header file of RCC HAL Extended module. - ****************************************************************************** - * @attention - * - * Copyright (c) 2017 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file in - * the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef STM32L4xx_HAL_RCC_EX_H -#define STM32L4xx_HAL_RCC_EX_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32l4xx_hal_def.h" - -/** @addtogroup STM32L4xx_HAL_Driver - * @{ - */ - -/** @addtogroup RCCEx - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ - -/** @defgroup RCCEx_Exported_Types RCCEx Exported Types - * @{ - */ - -#if defined(RCC_PLLSAI1_SUPPORT) -/** - * @brief PLLSAI1 Clock structure definition - */ -typedef struct -{ - - uint32_t PLLSAI1Source; /*!< PLLSAI1Source: PLLSAI1 entry clock source. - This parameter must be a value of @ref RCC_PLL_Clock_Source */ - -#if defined(RCC_PLLSAI1M_DIV_1_16_SUPPORT) - uint32_t PLLSAI1M; /*!< PLLSAI1M: specifies the division factor for PLLSAI1 input clock. - This parameter must be a number between Min_Data = 1 and Max_Data = 16 */ -#else - uint32_t PLLSAI1M; /*!< PLLSAI1M: specifies the division factor for PLLSAI1 input clock. - This parameter must be a number between Min_Data = 1 and Max_Data = 8 */ -#endif - - uint32_t PLLSAI1N; /*!< PLLSAI1N: specifies the multiplication factor for PLLSAI1 VCO output clock. - This parameter must be a number between 8 and 86 or 127 depending on devices. */ - - uint32_t PLLSAI1P; /*!< PLLSAI1P: specifies the division factor for SAI clock. - This parameter must be a value of @ref RCC_PLLP_Clock_Divider */ - - uint32_t PLLSAI1Q; /*!< PLLSAI1Q: specifies the division factor for USB/RNG/SDMMC1 clock. - This parameter must be a value of @ref RCC_PLLQ_Clock_Divider */ - - uint32_t PLLSAI1R; /*!< PLLSAI1R: specifies the division factor for ADC clock. - This parameter must be a value of @ref RCC_PLLR_Clock_Divider */ - - uint32_t PLLSAI1ClockOut; /*!< PLLSAIClockOut: specifies PLLSAI1 output clock to be enabled. - This parameter must be a value of @ref RCC_PLLSAI1_Clock_Output */ -}RCC_PLLSAI1InitTypeDef; -#endif /* RCC_PLLSAI1_SUPPORT */ - -#if defined(RCC_PLLSAI2_SUPPORT) -/** - * @brief PLLSAI2 Clock structure definition - */ -typedef struct -{ - - uint32_t PLLSAI2Source; /*!< PLLSAI2Source: PLLSAI2 entry clock source. - This parameter must be a value of @ref RCC_PLL_Clock_Source */ - -#if defined(RCC_PLLSAI2M_DIV_1_16_SUPPORT) - uint32_t PLLSAI2M; /*!< PLLSAI2M: specifies the division factor for PLLSAI2 input clock. - This parameter must be a number between Min_Data = 1 and Max_Data = 16 */ -#else - uint32_t PLLSAI2M; /*!< PLLSAI2M: specifies the division factor for PLLSAI2 input clock. - This parameter must be a number between Min_Data = 1 and Max_Data = 8 */ -#endif - - uint32_t PLLSAI2N; /*!< PLLSAI2N: specifies the multiplication factor for PLLSAI2 VCO output clock. - This parameter must be a number between 8 and 86 or 127 depending on devices. */ - - uint32_t PLLSAI2P; /*!< PLLSAI2P: specifies the division factor for SAI clock. - This parameter must be a value of @ref RCC_PLLP_Clock_Divider */ - -#if defined(RCC_PLLSAI2Q_DIV_SUPPORT) - uint32_t PLLSAI2Q; /*!< PLLSAI2Q: specifies the division factor for DSI clock. - This parameter must be a value of @ref RCC_PLLQ_Clock_Divider */ -#endif - - uint32_t PLLSAI2R; /*!< PLLSAI2R: specifies the division factor for ADC clock. - This parameter must be a value of @ref RCC_PLLR_Clock_Divider */ - - uint32_t PLLSAI2ClockOut; /*!< PLLSAIClockOut: specifies PLLSAI2 output clock to be enabled. - This parameter must be a value of @ref RCC_PLLSAI2_Clock_Output */ -}RCC_PLLSAI2InitTypeDef; - -#endif /* RCC_PLLSAI2_SUPPORT */ - -/** - * @brief RCC extended clocks structure definition - */ -typedef struct -{ - uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured. - This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */ -#if defined(RCC_PLLSAI1_SUPPORT) - - RCC_PLLSAI1InitTypeDef PLLSAI1; /*!< PLLSAI1 structure parameters. - This parameter will be used only when PLLSAI1 is selected as Clock Source for SAI1, USB/RNG/SDMMC1 or ADC */ -#endif /* RCC_PLLSAI1_SUPPORT */ -#if defined(RCC_PLLSAI2_SUPPORT) - - RCC_PLLSAI2InitTypeDef PLLSAI2; /*!< PLLSAI2 structure parameters. - This parameter will be used only when PLLSAI2 is selected as Clock Source for SAI2 or ADC */ - -#endif /* RCC_PLLSAI2_SUPPORT */ - - uint32_t Usart1ClockSelection; /*!< Specifies USART1 clock source. - This parameter can be a value of @ref RCCEx_USART1_Clock_Source */ - - uint32_t Usart2ClockSelection; /*!< Specifies USART2 clock source. - This parameter can be a value of @ref RCCEx_USART2_Clock_Source */ - -#if defined(USART3) - - uint32_t Usart3ClockSelection; /*!< Specifies USART3 clock source. - This parameter can be a value of @ref RCCEx_USART3_Clock_Source */ - -#endif /* USART3 */ - -#if defined(UART4) - - uint32_t Uart4ClockSelection; /*!< Specifies UART4 clock source. - This parameter can be a value of @ref RCCEx_UART4_Clock_Source */ - -#endif /* UART4 */ - -#if defined(UART5) - - uint32_t Uart5ClockSelection; /*!< Specifies UART5 clock source. - This parameter can be a value of @ref RCCEx_UART5_Clock_Source */ - -#endif /* UART5 */ - - uint32_t Lpuart1ClockSelection; /*!< Specifies LPUART1 clock source. - This parameter can be a value of @ref RCCEx_LPUART1_Clock_Source */ - - uint32_t I2c1ClockSelection; /*!< Specifies I2C1 clock source. - This parameter can be a value of @ref RCCEx_I2C1_Clock_Source */ - -#if defined(I2C2) - - uint32_t I2c2ClockSelection; /*!< Specifies I2C2 clock source. - This parameter can be a value of @ref RCCEx_I2C2_Clock_Source */ - -#endif /* I2C2 */ - - uint32_t I2c3ClockSelection; /*!< Specifies I2C3 clock source. - This parameter can be a value of @ref RCCEx_I2C3_Clock_Source */ - -#if defined(I2C4) - - uint32_t I2c4ClockSelection; /*!< Specifies I2C4 clock source. - This parameter can be a value of @ref RCCEx_I2C4_Clock_Source */ - -#endif /* I2C4 */ - - uint32_t Lptim1ClockSelection; /*!< Specifies LPTIM1 clock source. - This parameter can be a value of @ref RCCEx_LPTIM1_Clock_Source */ - - uint32_t Lptim2ClockSelection; /*!< Specifies LPTIM2 clock source. - This parameter can be a value of @ref RCCEx_LPTIM2_Clock_Source */ -#if defined(SAI1) - - uint32_t Sai1ClockSelection; /*!< Specifies SAI1 clock source. - This parameter can be a value of @ref RCCEx_SAI1_Clock_Source */ -#endif /* SAI1 */ - -#if defined(SAI2) - - uint32_t Sai2ClockSelection; /*!< Specifies SAI2 clock source. - This parameter can be a value of @ref RCCEx_SAI2_Clock_Source */ - -#endif /* SAI2 */ - -#if defined(USB_OTG_FS) || defined(USB) - - uint32_t UsbClockSelection; /*!< Specifies USB clock source (warning: same source for SDMMC1 and RNG). - This parameter can be a value of @ref RCCEx_USB_Clock_Source */ - -#endif /* USB_OTG_FS || USB */ - -#if defined(SDMMC1) - - uint32_t Sdmmc1ClockSelection; /*!< Specifies SDMMC1 clock source (warning: same source for USB and RNG). - This parameter can be a value of @ref RCCEx_SDMMC1_Clock_Source */ - -#endif /* SDMMC1 */ - - uint32_t RngClockSelection; /*!< Specifies RNG clock source (warning: same source for USB and SDMMC1). - This parameter can be a value of @ref RCCEx_RNG_Clock_Source */ - -#if !defined(STM32L412xx) && !defined(STM32L422xx) - uint32_t AdcClockSelection; /*!< Specifies ADC interface clock source. - This parameter can be a value of @ref RCCEx_ADC_Clock_Source */ -#endif /* !STM32L412xx && !STM32L422xx */ - -#if defined(SWPMI1) - - uint32_t Swpmi1ClockSelection; /*!< Specifies SWPMI1 clock source. - This parameter can be a value of @ref RCCEx_SWPMI1_Clock_Source */ - -#endif /* SWPMI1 */ - -#if defined(DFSDM1_Filter0) - - uint32_t Dfsdm1ClockSelection; /*!< Specifies DFSDM1 clock source. - This parameter can be a value of @ref RCCEx_DFSDM1_Clock_Source */ - -#if defined(STM32L4P5xx) || defined(STM32L4Q5xx) || defined(STM32L4R5xx) || defined(STM32L4R7xx) || defined(STM32L4R9xx) || defined(STM32L4S5xx) || defined(STM32L4S7xx) || defined(STM32L4S9xx) - uint32_t Dfsdm1AudioClockSelection; /*!< Specifies DFSDM1 audio clock source. - This parameter can be a value of @ref RCCEx_DFSDM1_Audio_Clock_Source */ - -#endif /* STM32L4P5xx || STM32L4Q5xx || STM32L4R5xx || STM32L4R7xx || STM32L4R9xx || STM32L4S5xx || STM32L4S7xx || STM32L4S9xx */ - -#endif /* DFSDM1_Filter0 */ - -#if defined(LTDC) - - uint32_t LtdcClockSelection; /*!< Specifies LTDC clock source. - This parameter can be a value of @ref RCCEx_LTDC_Clock_Source */ - -#endif /* LTDC */ - -#if defined(DSI) - - uint32_t DsiClockSelection; /*!< Specifies DSI clock source. - This parameter can be a value of @ref RCCEx_DSI_Clock_Source */ - -#endif /* DSI */ - -#if defined(OCTOSPI1) || defined(OCTOSPI2) - - uint32_t OspiClockSelection; /*!< Specifies OctoSPI clock source. - This parameter can be a value of @ref RCCEx_OSPI_Clock_Source */ - -#endif - - uint32_t RTCClockSelection; /*!< Specifies RTC clock source. - This parameter can be a value of @ref RCC_RTC_Clock_Source */ -}RCC_PeriphCLKInitTypeDef; - -#if defined(CRS) - -/** - * @brief RCC_CRS Init structure definition - */ -typedef struct -{ - uint32_t Prescaler; /*!< Specifies the division factor of the SYNC signal. - This parameter can be a value of @ref RCCEx_CRS_SynchroDivider */ - - uint32_t Source; /*!< Specifies the SYNC signal source. - This parameter can be a value of @ref RCCEx_CRS_SynchroSource */ - - uint32_t Polarity; /*!< Specifies the input polarity for the SYNC signal source. - This parameter can be a value of @ref RCCEx_CRS_SynchroPolarity */ - - uint32_t ReloadValue; /*!< Specifies the value to be loaded in the frequency error counter with each SYNC event. - It can be calculated in using macro __HAL_RCC_CRS_RELOADVALUE_CALCULATE(__FTARGET__, __FSYNC__) - This parameter must be a number between 0 and 0xFFFF or a value of @ref RCCEx_CRS_ReloadValueDefault .*/ - - uint32_t ErrorLimitValue; /*!< Specifies the value to be used to evaluate the captured frequency error value. - This parameter must be a number between 0 and 0xFF or a value of @ref RCCEx_CRS_ErrorLimitDefault */ - - uint32_t HSI48CalibrationValue; /*!< Specifies a user-programmable trimming value to the HSI48 oscillator. - This parameter must be a number between 0 and 0x7F for STM32L412xx/L422xx, between 0 and 0x3F otherwise, - or a value of @ref RCCEx_CRS_HSI48CalibrationDefault */ - -}RCC_CRSInitTypeDef; - -/** - * @brief RCC_CRS Synchronization structure definition - */ -typedef struct -{ - uint32_t ReloadValue; /*!< Specifies the value loaded in the Counter reload value. - This parameter must be a number between 0 and 0xFFFF */ - - uint32_t HSI48CalibrationValue; /*!< Specifies value loaded in HSI48 oscillator smooth trimming. - This parameter must be a number between 0 and 0x7F for STM32L412xx/L422xx, between 0 and 0x3F otherwise */ - - uint32_t FreqErrorCapture; /*!< Specifies the value loaded in the .FECAP, the frequency error counter - value latched in the time of the last SYNC event. - This parameter must be a number between 0 and 0xFFFF */ - - uint32_t FreqErrorDirection; /*!< Specifies the value loaded in the .FEDIR, the counting direction of the - frequency error counter latched in the time of the last SYNC event. - It shows whether the actual frequency is below or above the target. - This parameter must be a value of @ref RCCEx_CRS_FreqErrorDirection*/ - -}RCC_CRSSynchroInfoTypeDef; - -#endif /* CRS */ -/** - * @} - */ - -/* Exported constants --------------------------------------------------------*/ -/** @defgroup RCCEx_Exported_Constants RCCEx Exported Constants - * @{ - */ - -/** @defgroup RCCEx_LSCO_Clock_Source Low Speed Clock Source - * @{ - */ -#define RCC_LSCOSOURCE_LSI 0x00000000U /*!< LSI selection for low speed clock output */ -#define RCC_LSCOSOURCE_LSE RCC_BDCR_LSCOSEL /*!< LSE selection for low speed clock output */ -/** - * @} - */ - -/** @defgroup RCCEx_Periph_Clock_Selection Periph Clock Selection - * @{ - */ -#define RCC_PERIPHCLK_USART1 0x00000001U -#define RCC_PERIPHCLK_USART2 0x00000002U -#if defined(USART3) -#define RCC_PERIPHCLK_USART3 0x00000004U -#endif -#if defined(UART4) -#define RCC_PERIPHCLK_UART4 0x00000008U -#endif -#if defined(UART5) -#define RCC_PERIPHCLK_UART5 0x00000010U -#endif -#define RCC_PERIPHCLK_LPUART1 0x00000020U -#define RCC_PERIPHCLK_I2C1 0x00000040U -#if defined(I2C2) -#define RCC_PERIPHCLK_I2C2 0x00000080U -#endif -#define RCC_PERIPHCLK_I2C3 0x00000100U -#define RCC_PERIPHCLK_LPTIM1 0x00000200U -#define RCC_PERIPHCLK_LPTIM2 0x00000400U -#if defined(SAI1) -#define RCC_PERIPHCLK_SAI1 0x00000800U -#endif -#if defined(SAI2) -#define RCC_PERIPHCLK_SAI2 0x00001000U -#endif -#if defined(USB_OTG_FS) || defined(USB) -#define RCC_PERIPHCLK_USB 0x00002000U -#endif -#define RCC_PERIPHCLK_ADC 0x00004000U -#if defined(SWPMI1) -#define RCC_PERIPHCLK_SWPMI1 0x00008000U -#endif -#if defined(DFSDM1_Filter0) -#define RCC_PERIPHCLK_DFSDM1 0x00010000U -#if defined(STM32L4P5xx) || defined(STM32L4Q5xx) || defined(STM32L4R5xx) || defined(STM32L4R7xx) || defined(STM32L4R9xx) || defined(STM32L4S5xx) || defined(STM32L4S7xx) || defined(STM32L4S9xx) -#define RCC_PERIPHCLK_DFSDM1AUDIO 0x00200000U -#endif /* STM32L4P5xx || STM32L4Q5xx || STM32L4R5xx || STM32L4R7xx || STM32L4R9xx || STM32L4S5xx || STM32L4S7xx || STM32L4S9xx */ -#endif -#define RCC_PERIPHCLK_RTC 0x00020000U -#define RCC_PERIPHCLK_RNG 0x00040000U -#if defined(SDMMC1) -#define RCC_PERIPHCLK_SDMMC1 0x00080000U -#endif -#if defined(I2C4) -#define RCC_PERIPHCLK_I2C4 0x00100000U -#endif -#if defined(LTDC) -#define RCC_PERIPHCLK_LTDC 0x00400000U -#endif -#if defined(DSI) -#define RCC_PERIPHCLK_DSI 0x00800000U -#endif -#if defined(OCTOSPI1) || defined(OCTOSPI2) -#define RCC_PERIPHCLK_OSPI 0x01000000U -#endif -/** - * @} - */ - - -/** @defgroup RCCEx_USART1_Clock_Source USART1 Clock Source - * @{ - */ -#define RCC_USART1CLKSOURCE_PCLK2 0x00000000U -#define RCC_USART1CLKSOURCE_SYSCLK RCC_CCIPR_USART1SEL_0 -#define RCC_USART1CLKSOURCE_HSI RCC_CCIPR_USART1SEL_1 -#define RCC_USART1CLKSOURCE_LSE (RCC_CCIPR_USART1SEL_0 | RCC_CCIPR_USART1SEL_1) -/** - * @} - */ - -/** @defgroup RCCEx_USART2_Clock_Source USART2 Clock Source - * @{ - */ -#define RCC_USART2CLKSOURCE_PCLK1 0x00000000U -#define RCC_USART2CLKSOURCE_SYSCLK RCC_CCIPR_USART2SEL_0 -#define RCC_USART2CLKSOURCE_HSI RCC_CCIPR_USART2SEL_1 -#define RCC_USART2CLKSOURCE_LSE (RCC_CCIPR_USART2SEL_0 | RCC_CCIPR_USART2SEL_1) -/** - * @} - */ - -#if defined(USART3) -/** @defgroup RCCEx_USART3_Clock_Source USART3 Clock Source - * @{ - */ -#define RCC_USART3CLKSOURCE_PCLK1 0x00000000U -#define RCC_USART3CLKSOURCE_SYSCLK RCC_CCIPR_USART3SEL_0 -#define RCC_USART3CLKSOURCE_HSI RCC_CCIPR_USART3SEL_1 -#define RCC_USART3CLKSOURCE_LSE (RCC_CCIPR_USART3SEL_0 | RCC_CCIPR_USART3SEL_1) -/** - * @} - */ -#endif /* USART3 */ - -#if defined(UART4) -/** @defgroup RCCEx_UART4_Clock_Source UART4 Clock Source - * @{ - */ -#define RCC_UART4CLKSOURCE_PCLK1 0x00000000U -#define RCC_UART4CLKSOURCE_SYSCLK RCC_CCIPR_UART4SEL_0 -#define RCC_UART4CLKSOURCE_HSI RCC_CCIPR_UART4SEL_1 -#define RCC_UART4CLKSOURCE_LSE (RCC_CCIPR_UART4SEL_0 | RCC_CCIPR_UART4SEL_1) -/** - * @} - */ -#endif /* UART4 */ - -#if defined(UART5) -/** @defgroup RCCEx_UART5_Clock_Source UART5 Clock Source - * @{ - */ -#define RCC_UART5CLKSOURCE_PCLK1 0x00000000U -#define RCC_UART5CLKSOURCE_SYSCLK RCC_CCIPR_UART5SEL_0 -#define RCC_UART5CLKSOURCE_HSI RCC_CCIPR_UART5SEL_1 -#define RCC_UART5CLKSOURCE_LSE (RCC_CCIPR_UART5SEL_0 | RCC_CCIPR_UART5SEL_1) -/** - * @} - */ -#endif /* UART5 */ - -/** @defgroup RCCEx_LPUART1_Clock_Source LPUART1 Clock Source - * @{ - */ -#define RCC_LPUART1CLKSOURCE_PCLK1 0x00000000U -#define RCC_LPUART1CLKSOURCE_SYSCLK RCC_CCIPR_LPUART1SEL_0 -#define RCC_LPUART1CLKSOURCE_HSI RCC_CCIPR_LPUART1SEL_1 -#define RCC_LPUART1CLKSOURCE_LSE (RCC_CCIPR_LPUART1SEL_0 | RCC_CCIPR_LPUART1SEL_1) -/** - * @} - */ - -/** @defgroup RCCEx_I2C1_Clock_Source I2C1 Clock Source - * @{ - */ -#define RCC_I2C1CLKSOURCE_PCLK1 0x00000000U -#define RCC_I2C1CLKSOURCE_SYSCLK RCC_CCIPR_I2C1SEL_0 -#define RCC_I2C1CLKSOURCE_HSI RCC_CCIPR_I2C1SEL_1 -/** - * @} - */ - -#if defined(I2C2) -/** @defgroup RCCEx_I2C2_Clock_Source I2C2 Clock Source - * @{ - */ -#define RCC_I2C2CLKSOURCE_PCLK1 0x00000000U -#define RCC_I2C2CLKSOURCE_SYSCLK RCC_CCIPR_I2C2SEL_0 -#define RCC_I2C2CLKSOURCE_HSI RCC_CCIPR_I2C2SEL_1 -/** - * @} - */ -#endif /* I2C2 */ - -/** @defgroup RCCEx_I2C3_Clock_Source I2C3 Clock Source - * @{ - */ -#define RCC_I2C3CLKSOURCE_PCLK1 0x00000000U -#define RCC_I2C3CLKSOURCE_SYSCLK RCC_CCIPR_I2C3SEL_0 -#define RCC_I2C3CLKSOURCE_HSI RCC_CCIPR_I2C3SEL_1 -/** - * @} - */ - -#if defined(I2C4) -/** @defgroup RCCEx_I2C4_Clock_Source I2C4 Clock Source - * @{ - */ -#define RCC_I2C4CLKSOURCE_PCLK1 0x00000000U -#define RCC_I2C4CLKSOURCE_SYSCLK RCC_CCIPR2_I2C4SEL_0 -#define RCC_I2C4CLKSOURCE_HSI RCC_CCIPR2_I2C4SEL_1 -/** - * @} - */ -#endif /* I2C4 */ - -#if defined(SAI1) -/** @defgroup RCCEx_SAI1_Clock_Source SAI1 Clock Source - * @{ - */ -#define RCC_SAI1CLKSOURCE_PLLSAI1 0x00000000U -#if defined(RCC_PLLSAI2_SUPPORT) -#if defined(STM32L4P5xx) || defined(STM32L4Q5xx) || defined(STM32L4R5xx) || defined(STM32L4R7xx) || defined(STM32L4R9xx) || defined(STM32L4S5xx) || defined(STM32L4S7xx) || defined(STM32L4S9xx) -#define RCC_SAI1CLKSOURCE_PLLSAI2 RCC_CCIPR2_SAI1SEL_0 -#else -#define RCC_SAI1CLKSOURCE_PLLSAI2 RCC_CCIPR_SAI1SEL_0 -#endif /* STM32L4P5xx || STM32L4Q5xx || STM32L4R5xx || STM32L4R7xx || STM32L4R9xx || STM32L4S5xx || STM32L4S7xx || STM32L4S9xx */ -#endif /* RCC_PLLSAI2_SUPPORT */ -#if defined(STM32L4P5xx) || defined(STM32L4Q5xx) || defined(STM32L4R5xx) || defined(STM32L4R7xx) || defined(STM32L4R9xx) || defined(STM32L4S5xx) || defined(STM32L4S7xx) || defined(STM32L4S9xx) -#define RCC_SAI1CLKSOURCE_PLL RCC_CCIPR2_SAI1SEL_1 -#define RCC_SAI1CLKSOURCE_PIN (RCC_CCIPR2_SAI1SEL_1 | RCC_CCIPR2_SAI1SEL_0) -#define RCC_SAI1CLKSOURCE_HSI RCC_CCIPR2_SAI1SEL_2 -#else -#define RCC_SAI1CLKSOURCE_PLL RCC_CCIPR_SAI1SEL_1 -#define RCC_SAI1CLKSOURCE_PIN RCC_CCIPR_SAI1SEL -#endif /* STM32L4P5xx || STM32L4Q5xx || STM32L4R5xx || STM32L4R7xx || STM32L4R9xx || STM32L4S5xx || STM32L4S7xx || STM32L4S9xx */ -/** - * @} - */ -#endif /* SAI1 */ - -#if defined(SAI2) -/** @defgroup RCCEx_SAI2_Clock_Source SAI2 Clock Source - * @{ - */ -#define RCC_SAI2CLKSOURCE_PLLSAI1 0x00000000U -#if defined(STM32L4P5xx) || defined(STM32L4Q5xx) || defined(STM32L4R5xx) || defined(STM32L4R7xx) || defined(STM32L4R9xx) || defined(STM32L4S5xx) || defined(STM32L4S7xx) || defined(STM32L4S9xx) -#define RCC_SAI2CLKSOURCE_PLLSAI2 RCC_CCIPR2_SAI2SEL_0 -#define RCC_SAI2CLKSOURCE_PLL RCC_CCIPR2_SAI2SEL_1 -#define RCC_SAI2CLKSOURCE_PIN (RCC_CCIPR2_SAI2SEL_1 | RCC_CCIPR2_SAI2SEL_0) -#define RCC_SAI2CLKSOURCE_HSI RCC_CCIPR2_SAI2SEL_2 -#else -#define RCC_SAI2CLKSOURCE_PLLSAI2 RCC_CCIPR_SAI2SEL_0 -#define RCC_SAI2CLKSOURCE_PLL RCC_CCIPR_SAI2SEL_1 -#define RCC_SAI2CLKSOURCE_PIN RCC_CCIPR_SAI2SEL -#endif /* STM32L4P5xx || STM32L4Q5xx || STM32L4R5xx || STM32L4R7xx || STM32L4R9xx || STM32L4S5xx || STM32L4S7xx || STM32L4S9xx */ -/** - * @} - */ -#endif /* SAI2 */ - -/** @defgroup RCCEx_LPTIM1_Clock_Source LPTIM1 Clock Source - * @{ - */ -#define RCC_LPTIM1CLKSOURCE_PCLK1 0x00000000U -#define RCC_LPTIM1CLKSOURCE_LSI RCC_CCIPR_LPTIM1SEL_0 -#define RCC_LPTIM1CLKSOURCE_HSI RCC_CCIPR_LPTIM1SEL_1 -#define RCC_LPTIM1CLKSOURCE_LSE RCC_CCIPR_LPTIM1SEL -/** - * @} - */ - -/** @defgroup RCCEx_LPTIM2_Clock_Source LPTIM2 Clock Source - * @{ - */ -#define RCC_LPTIM2CLKSOURCE_PCLK1 0x00000000U -#define RCC_LPTIM2CLKSOURCE_LSI RCC_CCIPR_LPTIM2SEL_0 -#define RCC_LPTIM2CLKSOURCE_HSI RCC_CCIPR_LPTIM2SEL_1 -#define RCC_LPTIM2CLKSOURCE_LSE RCC_CCIPR_LPTIM2SEL -/** - * @} - */ - -#if defined(SDMMC1) -/** @defgroup RCCEx_SDMMC1_Clock_Source SDMMC1 Clock Source - * @{ - */ -#if defined(RCC_HSI48_SUPPORT) -#define RCC_SDMMC1CLKSOURCE_HSI48 0x00000000U /*!< HSI48 clock selected as SDMMC1 clock */ -#else -#define RCC_SDMMC1CLKSOURCE_NONE 0x00000000U /*!< No clock selected as SDMMC1 clock */ -#endif /* RCC_HSI48_SUPPORT */ -#define RCC_SDMMC1CLKSOURCE_PLLSAI1 RCC_CCIPR_CLK48SEL_0 /*!< PLLSAI1 "Q" clock selected as SDMMC1 clock */ -#define RCC_SDMMC1CLKSOURCE_PLL RCC_CCIPR_CLK48SEL_1 /*!< PLL "Q" clock selected as SDMMC1 clock */ -#define RCC_SDMMC1CLKSOURCE_MSI RCC_CCIPR_CLK48SEL /*!< MSI clock selected as SDMMC1 clock */ -#if defined(RCC_CCIPR2_SDMMCSEL) -#define RCC_SDMMC1CLKSOURCE_PLLP RCC_CCIPR2_SDMMCSEL /*!< PLL "P" clock selected as SDMMC1 kernel clock */ -#endif /* RCC_CCIPR2_SDMMCSEL */ -/** - * @} - */ -#endif /* SDMMC1 */ - -/** @defgroup RCCEx_RNG_Clock_Source RNG Clock Source - * @{ - */ -#if defined(RCC_HSI48_SUPPORT) -#define RCC_RNGCLKSOURCE_HSI48 0x00000000U -#else -#define RCC_RNGCLKSOURCE_NONE 0x00000000U -#endif /* RCC_HSI48_SUPPORT */ -#if defined(RCC_PLLSAI1_SUPPORT) -#define RCC_RNGCLKSOURCE_PLLSAI1 RCC_CCIPR_CLK48SEL_0 -#endif /* RCC_PLLSAI1_SUPPORT */ -#define RCC_RNGCLKSOURCE_PLL RCC_CCIPR_CLK48SEL_1 -#define RCC_RNGCLKSOURCE_MSI RCC_CCIPR_CLK48SEL -/** - * @} - */ - -#if defined(USB_OTG_FS) || defined(USB) -/** @defgroup RCCEx_USB_Clock_Source USB Clock Source - * @{ - */ -#if defined(RCC_HSI48_SUPPORT) -#define RCC_USBCLKSOURCE_HSI48 0x00000000U -#else -#define RCC_USBCLKSOURCE_NONE 0x00000000U -#endif /* RCC_HSI48_SUPPORT */ -#if defined(RCC_PLLSAI1_SUPPORT) -#define RCC_USBCLKSOURCE_PLLSAI1 RCC_CCIPR_CLK48SEL_0 -#endif /* RCC_PLLSAI1_SUPPORT */ -#define RCC_USBCLKSOURCE_PLL RCC_CCIPR_CLK48SEL_1 -#define RCC_USBCLKSOURCE_MSI RCC_CCIPR_CLK48SEL -/** - * @} - */ -#endif /* USB_OTG_FS || USB */ - -/** @defgroup RCCEx_ADC_Clock_Source ADC Clock Source - * @{ - */ -#define RCC_ADCCLKSOURCE_NONE 0x00000000U -#if defined(RCC_PLLSAI1_SUPPORT) -#define RCC_ADCCLKSOURCE_PLLSAI1 RCC_CCIPR_ADCSEL_0 -#endif /* RCC_PLLSAI1_SUPPORT */ -#if defined(STM32L471xx) || defined(STM32L475xx) || defined(STM32L476xx) || defined(STM32L485xx) || defined(STM32L486xx) || defined(STM32L496xx) || defined(STM32L4A6xx) -#define RCC_ADCCLKSOURCE_PLLSAI2 RCC_CCIPR_ADCSEL_1 -#endif /* STM32L471xx || STM32L475xx || STM32L476xx || STM32L485xx || STM32L486xx || STM32L496xx || STM32L4A6xx */ -#if defined(RCC_CCIPR_ADCSEL) -#define RCC_ADCCLKSOURCE_SYSCLK RCC_CCIPR_ADCSEL -#else -#define RCC_ADCCLKSOURCE_SYSCLK 0x30000000U -#endif /* RCC_CCIPR_ADCSEL */ -/** - * @} - */ - -#if defined(SWPMI1) -/** @defgroup RCCEx_SWPMI1_Clock_Source SWPMI1 Clock Source - * @{ - */ -#define RCC_SWPMI1CLKSOURCE_PCLK1 0x00000000U -#define RCC_SWPMI1CLKSOURCE_HSI RCC_CCIPR_SWPMI1SEL -/** - * @} - */ -#endif /* SWPMI1 */ - -#if defined(DFSDM1_Filter0) -/** @defgroup RCCEx_DFSDM1_Clock_Source DFSDM1 Clock Source - * @{ - */ -#define RCC_DFSDM1CLKSOURCE_PCLK2 0x00000000U -#if defined(STM32L4P5xx) || defined(STM32L4Q5xx) || defined(STM32L4R5xx) || defined(STM32L4R7xx) || defined(STM32L4R9xx) || defined(STM32L4S5xx) || defined(STM32L4S7xx) || defined(STM32L4S9xx) -#define RCC_DFSDM1CLKSOURCE_SYSCLK RCC_CCIPR2_DFSDM1SEL -#else -#define RCC_DFSDM1CLKSOURCE_SYSCLK RCC_CCIPR_DFSDM1SEL -#endif /* STM32L4P5xx || STM32L4Q5xx || STM32L4R5xx || STM32L4R7xx || STM32L4R9xx || STM32L4S5xx || STM32L4S7xx || STM32L4S9xx */ -/** - * @} - */ - -#if defined(STM32L4P5xx) || defined(STM32L4Q5xx) || defined(STM32L4R5xx) || defined(STM32L4R7xx) || defined(STM32L4R9xx) || defined(STM32L4S5xx) || defined(STM32L4S7xx) || defined(STM32L4S9xx) -/** @defgroup RCCEx_DFSDM1_Audio_Clock_Source DFSDM1 Audio Clock Source - * @{ - */ -#define RCC_DFSDM1AUDIOCLKSOURCE_SAI1 0x00000000U -#define RCC_DFSDM1AUDIOCLKSOURCE_HSI RCC_CCIPR2_ADFSDM1SEL_0 -#define RCC_DFSDM1AUDIOCLKSOURCE_MSI RCC_CCIPR2_ADFSDM1SEL_1 -/** - * @} - */ -#endif /* STM32L4P5xx || STM32L4Q5xx || STM32L4R5xx || STM32L4R7xx || STM32L4R9xx || STM32L4S5xx || STM32L4S7xx || STM32L4S9xx */ -#endif /* DFSDM1_Filter0 */ - -#if defined(LTDC) -/** @defgroup RCCEx_LTDC_Clock_Source LTDC Clock Source - * @{ - */ -#define RCC_LTDCCLKSOURCE_PLLSAI2_DIV2 0x00000000U -#define RCC_LTDCCLKSOURCE_PLLSAI2_DIV4 RCC_CCIPR2_PLLSAI2DIVR_0 -#define RCC_LTDCCLKSOURCE_PLLSAI2_DIV8 RCC_CCIPR2_PLLSAI2DIVR_1 -#define RCC_LTDCCLKSOURCE_PLLSAI2_DIV16 RCC_CCIPR2_PLLSAI2DIVR -/** - * @} - */ -#endif /* LTDC */ - -#if defined(DSI) -/** @defgroup RCCEx_DSI_Clock_Source DSI Clock Source - * @{ - */ -#define RCC_DSICLKSOURCE_DSIPHY 0x00000000U -#define RCC_DSICLKSOURCE_PLLSAI2 RCC_CCIPR2_DSISEL -/** - * @} - */ -#endif /* DSI */ - -#if defined(OCTOSPI1) || defined(OCTOSPI2) -/** @defgroup RCCEx_OSPI_Clock_Source OctoSPI Clock Source - * @{ - */ -#define RCC_OSPICLKSOURCE_SYSCLK 0x00000000U -#define RCC_OSPICLKSOURCE_MSI RCC_CCIPR2_OSPISEL_0 -#define RCC_OSPICLKSOURCE_PLL RCC_CCIPR2_OSPISEL_1 -/** - * @} - */ -#endif /* OCTOSPI1 || OCTOSPI2 */ - -/** @defgroup RCCEx_EXTI_LINE_LSECSS RCC LSE CSS external interrupt line - * @{ - */ -#define RCC_EXTI_LINE_LSECSS EXTI_IMR1_IM19 /*!< External interrupt line 19 connected to the LSE CSS EXTI Line */ -/** - * @} - */ - -#if defined(CRS) - -/** @defgroup RCCEx_CRS_Status RCCEx CRS Status - * @{ - */ -#define RCC_CRS_NONE 0x00000000U -#define RCC_CRS_TIMEOUT 0x00000001U -#define RCC_CRS_SYNCOK 0x00000002U -#define RCC_CRS_SYNCWARN 0x00000004U -#define RCC_CRS_SYNCERR 0x00000008U -#define RCC_CRS_SYNCMISS 0x00000010U -#define RCC_CRS_TRIMOVF 0x00000020U -/** - * @} - */ - -/** @defgroup RCCEx_CRS_SynchroSource RCCEx CRS SynchroSource - * @{ - */ -#define RCC_CRS_SYNC_SOURCE_GPIO 0x00000000U /*!< Synchro Signal source GPIO */ -#define RCC_CRS_SYNC_SOURCE_LSE CRS_CFGR_SYNCSRC_0 /*!< Synchro Signal source LSE */ -#define RCC_CRS_SYNC_SOURCE_USB CRS_CFGR_SYNCSRC_1 /*!< Synchro Signal source USB SOF (default)*/ -/** - * @} - */ - -/** @defgroup RCCEx_CRS_SynchroDivider RCCEx CRS SynchroDivider - * @{ - */ -#define RCC_CRS_SYNC_DIV1 0x00000000U /*!< Synchro Signal not divided (default) */ -#define RCC_CRS_SYNC_DIV2 CRS_CFGR_SYNCDIV_0 /*!< Synchro Signal divided by 2 */ -#define RCC_CRS_SYNC_DIV4 CRS_CFGR_SYNCDIV_1 /*!< Synchro Signal divided by 4 */ -#define RCC_CRS_SYNC_DIV8 (CRS_CFGR_SYNCDIV_1 | CRS_CFGR_SYNCDIV_0) /*!< Synchro Signal divided by 8 */ -#define RCC_CRS_SYNC_DIV16 CRS_CFGR_SYNCDIV_2 /*!< Synchro Signal divided by 16 */ -#define RCC_CRS_SYNC_DIV32 (CRS_CFGR_SYNCDIV_2 | CRS_CFGR_SYNCDIV_0) /*!< Synchro Signal divided by 32 */ -#define RCC_CRS_SYNC_DIV64 (CRS_CFGR_SYNCDIV_2 | CRS_CFGR_SYNCDIV_1) /*!< Synchro Signal divided by 64 */ -#define RCC_CRS_SYNC_DIV128 CRS_CFGR_SYNCDIV /*!< Synchro Signal divided by 128 */ -/** - * @} - */ - -/** @defgroup RCCEx_CRS_SynchroPolarity RCCEx CRS SynchroPolarity - * @{ - */ -#define RCC_CRS_SYNC_POLARITY_RISING 0x00000000U /*!< Synchro Active on rising edge (default) */ -#define RCC_CRS_SYNC_POLARITY_FALLING CRS_CFGR_SYNCPOL /*!< Synchro Active on falling edge */ -/** - * @} - */ - -/** @defgroup RCCEx_CRS_ReloadValueDefault RCCEx CRS ReloadValueDefault - * @{ - */ -#define RCC_CRS_RELOADVALUE_DEFAULT 0x0000BB7FU /*!< The reset value of the RELOAD field corresponds - to a target frequency of 48 MHz and a synchronization signal frequency of 1 kHz (SOF signal from USB). */ -/** - * @} - */ - -/** @defgroup RCCEx_CRS_ErrorLimitDefault RCCEx CRS ErrorLimitDefault - * @{ - */ -#define RCC_CRS_ERRORLIMIT_DEFAULT 0x00000022U /*!< Default Frequency error limit */ -/** - * @} - */ - -/** @defgroup RCCEx_CRS_HSI48CalibrationDefault RCCEx CRS HSI48CalibrationDefault - * @{ - */ -#if defined(STM32L412xx) || defined(STM32L422xx) -#define RCC_CRS_HSI48CALIBRATION_DEFAULT 0x00000040U /*!< The default value is 64, which corresponds to the middle of the trimming interval. - The trimming step is specified in the product datasheet. A higher TRIM value - corresponds to a higher output frequency */ -#else -#define RCC_CRS_HSI48CALIBRATION_DEFAULT 0x00000020U /*!< The default value is 32, which corresponds to the middle of the trimming interval. - The trimming step is specified in the product datasheet. A higher TRIM value - corresponds to a higher output frequency */ -#endif -/** - * @} - */ - -/** @defgroup RCCEx_CRS_FreqErrorDirection RCCEx CRS FreqErrorDirection - * @{ - */ -#define RCC_CRS_FREQERRORDIR_UP 0x00000000U /*!< Upcounting direction, the actual frequency is above the target */ -#define RCC_CRS_FREQERRORDIR_DOWN CRS_ISR_FEDIR /*!< Downcounting direction, the actual frequency is below the target */ -/** - * @} - */ - -/** @defgroup RCCEx_CRS_Interrupt_Sources RCCEx CRS Interrupt Sources - * @{ - */ -#define RCC_CRS_IT_SYNCOK CRS_CR_SYNCOKIE /*!< SYNC event OK */ -#define RCC_CRS_IT_SYNCWARN CRS_CR_SYNCWARNIE /*!< SYNC warning */ -#define RCC_CRS_IT_ERR CRS_CR_ERRIE /*!< Error */ -#define RCC_CRS_IT_ESYNC CRS_CR_ESYNCIE /*!< Expected SYNC */ -#define RCC_CRS_IT_SYNCERR CRS_CR_ERRIE /*!< SYNC error */ -#define RCC_CRS_IT_SYNCMISS CRS_CR_ERRIE /*!< SYNC missed */ -#define RCC_CRS_IT_TRIMOVF CRS_CR_ERRIE /*!< Trimming overflow or underflow */ - -/** - * @} - */ - -/** @defgroup RCCEx_CRS_Flags RCCEx CRS Flags - * @{ - */ -#define RCC_CRS_FLAG_SYNCOK CRS_ISR_SYNCOKF /*!< SYNC event OK flag */ -#define RCC_CRS_FLAG_SYNCWARN CRS_ISR_SYNCWARNF /*!< SYNC warning flag */ -#define RCC_CRS_FLAG_ERR CRS_ISR_ERRF /*!< Error flag */ -#define RCC_CRS_FLAG_ESYNC CRS_ISR_ESYNCF /*!< Expected SYNC flag */ -#define RCC_CRS_FLAG_SYNCERR CRS_ISR_SYNCERR /*!< SYNC error */ -#define RCC_CRS_FLAG_SYNCMISS CRS_ISR_SYNCMISS /*!< SYNC missed*/ -#define RCC_CRS_FLAG_TRIMOVF CRS_ISR_TRIMOVF /*!< Trimming overflow or underflow */ - -/** - * @} - */ - -#endif /* CRS */ - -/** - * @} - */ - -/* Exported macros -----------------------------------------------------------*/ -/** @defgroup RCCEx_Exported_Macros RCCEx Exported Macros - * @{ - */ - -#if defined(RCC_PLLSAI1_SUPPORT) - -/** - * @brief Macro to configure the PLLSAI1 clock multiplication and division factors. - * - * @note This function must be used only when the PLLSAI1 is disabled. - * @note PLLSAI1 clock source is common with the main PLL (configured through - * __HAL_RCC_PLL_CONFIG() macro) - * - @if STM32L4S9xx - * @param __PLLSAI1M__ specifies the division factor of PLLSAI1 input clock. - * This parameter must be a number between Min_Data = 1 and Max_Data = 16. - * - @endif - * @param __PLLSAI1N__ specifies the multiplication factor for PLLSAI1 VCO output clock. - * This parameter must be a number between 8 and 86 or 127 depending on devices. - * @note You have to set the PLLSAI1N parameter correctly to ensure that the VCO - * output frequency is between 64 and 344 MHz. - * PLLSAI1 clock frequency = f(PLLSAI1) multiplied by PLLSAI1N - * - * @param __PLLSAI1P__ specifies the division factor for SAI clock. - * This parameter must be a number in the range (7 or 17) for STM32L47xxx/L48xxx - * else (2 to 31). - * SAI1 clock frequency = f(PLLSAI1) / PLLSAI1P - * - * @param __PLLSAI1Q__ specifies the division factor for USB/RNG/SDMMC1 clock. - * This parameter must be in the range (2, 4, 6 or 8). - * USB/RNG/SDMMC1 clock frequency = f(PLLSAI1) / PLLSAI1Q - * - * @param __PLLSAI1R__ specifies the division factor for SAR ADC clock. - * This parameter must be in the range (2, 4, 6 or 8). - * ADC clock frequency = f(PLLSAI1) / PLLSAI1R - * - * @retval None - */ -#if defined(RCC_PLLSAI1M_DIV_1_16_SUPPORT) - -#if defined(RCC_PLLSAI1P_DIV_2_31_SUPPORT) - -#define __HAL_RCC_PLLSAI1_CONFIG(__PLLSAI1M__, __PLLSAI1N__, __PLLSAI1P__, __PLLSAI1Q__, __PLLSAI1R__) \ - MODIFY_REG(RCC->PLLSAI1CFGR, \ - (RCC_PLLSAI1CFGR_PLLSAI1M | RCC_PLLSAI1CFGR_PLLSAI1N | RCC_PLLSAI1CFGR_PLLSAI1P | \ - RCC_PLLSAI1CFGR_PLLSAI1Q | RCC_PLLSAI1CFGR_PLLSAI1R | RCC_PLLSAI1CFGR_PLLSAI1PDIV), \ - ((((__PLLSAI1M__) - 1U) << RCC_PLLSAI1CFGR_PLLSAI1M_Pos) | \ - ((__PLLSAI1N__) << RCC_PLLSAI1CFGR_PLLSAI1N_Pos) | \ - ((((__PLLSAI1Q__) >> 1U) - 1U) << RCC_PLLSAI1CFGR_PLLSAI1Q_Pos) | \ - ((((__PLLSAI1R__) >> 1U) - 1U) << RCC_PLLSAI1CFGR_PLLSAI1R_Pos) | \ - ((uint32_t)(__PLLSAI1P__) << RCC_PLLSAI1CFGR_PLLSAI1PDIV_Pos))) - -#else - -#define __HAL_RCC_PLLSAI1_CONFIG(__PLLSAI1M__, __PLLSAI1N__, __PLLSAI1P__, __PLLSAI1Q__, __PLLSAI1R__) \ - MODIFY_REG(RCC->PLLSAI1CFGR, \ - (RCC_PLLSAI1CFGR_PLLSAI1M | RCC_PLLSAI1CFGR_PLLSAI1N | RCC_PLLSAI1CFGR_PLLSAI1P | \ - RCC_PLLSAI1CFGR_PLLSAI1Q | RCC_PLLSAI1CFGR_PLLSAI1R), \ - ((((__PLLSAI1M__) - 1U) << RCC_PLLSAI1CFGR_PLLSAI1M_Pos) | \ - ((__PLLSAI1N__) << RCC_PLLSAI1CFGR_PLLSAI1N_Pos) | \ - ((((__PLLSAI1Q__) >> 1U) - 1U) << RCC_PLLSAI1CFGR_PLLSAI1Q_Pos) | \ - ((((__PLLSAI1R__) >> 1U) - 1U) << RCC_PLLSAI1CFGR_PLLSAI1R_Pos) | \ - (((__PLLSAI1P__) >> 4U) << RCC_PLLSAI1CFGR_PLLSAI1P_Pos))) - -#endif /* RCC_PLLSAI1P_DIV_2_31_SUPPORT */ - -#else - -#if defined(RCC_PLLSAI1P_DIV_2_31_SUPPORT) - -#define __HAL_RCC_PLLSAI1_CONFIG(__PLLSAI1N__, __PLLSAI1P__, __PLLSAI1Q__, __PLLSAI1R__) \ - MODIFY_REG(RCC->PLLSAI1CFGR, \ - (RCC_PLLSAI1CFGR_PLLSAI1N | RCC_PLLSAI1CFGR_PLLSAI1P | \ - RCC_PLLSAI1CFGR_PLLSAI1Q | RCC_PLLSAI1CFGR_PLLSAI1R | RCC_PLLSAI1CFGR_PLLSAI1PDIV), \ - (((__PLLSAI1N__) << RCC_PLLSAI1CFGR_PLLSAI1N_Pos) | \ - ((((__PLLSAI1Q__) >> 1U) - 1U) << RCC_PLLSAI1CFGR_PLLSAI1Q_Pos) | \ - ((((__PLLSAI1R__) >> 1U) - 1U) << RCC_PLLSAI1CFGR_PLLSAI1R_Pos) | \ - ((uint32_t)(__PLLSAI1P__) << RCC_PLLSAI1CFGR_PLLSAI1PDIV_Pos))) - -#else - -#define __HAL_RCC_PLLSAI1_CONFIG(__PLLSAI1N__, __PLLSAI1P__, __PLLSAI1Q__, __PLLSAI1R__) \ - MODIFY_REG(RCC->PLLSAI1CFGR, \ - (RCC_PLLSAI1CFGR_PLLSAI1N | RCC_PLLSAI1CFGR_PLLSAI1P | \ - RCC_PLLSAI1CFGR_PLLSAI1Q | RCC_PLLSAI1CFGR_PLLSAI1R), \ - (((__PLLSAI1N__) << RCC_PLLSAI1CFGR_PLLSAI1N_Pos) | \ - ((((__PLLSAI1Q__) >> 1U) - 1U) << RCC_PLLSAI1CFGR_PLLSAI1Q_Pos) | \ - ((((__PLLSAI1R__) >> 1U) - 1U) << RCC_PLLSAI1CFGR_PLLSAI1R_Pos) | \ - (((__PLLSAI1P__) >> 4U) << RCC_PLLSAI1CFGR_PLLSAI1P_Pos))) - -#endif /* RCC_PLLSAI1P_DIV_2_31_SUPPORT */ - -#endif /* RCC_PLLSAI1M_DIV_1_16_SUPPORT */ - -/** - * @brief Macro to configure the PLLSAI1 clock multiplication factor N. - * - * @note This function must be used only when the PLLSAI1 is disabled. - * @note PLLSAI1 clock source is common with the main PLL (configured through - * __HAL_RCC_PLL_CONFIG() macro) - * - * @param __PLLSAI1N__ specifies the multiplication factor for PLLSAI1 VCO output clock. - * This parameter must be a number between 8 and 86 or 127 depending on devices. - * @note You have to set the PLLSAI1N parameter correctly to ensure that the VCO - * output frequency is between 64 and 344 MHz. - * Use to set PLLSAI1 clock frequency = f(PLLSAI1) multiplied by PLLSAI1N - * - * @retval None - */ -#define __HAL_RCC_PLLSAI1_MULN_CONFIG(__PLLSAI1N__) \ - MODIFY_REG(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1N, (__PLLSAI1N__) << RCC_PLLSAI1CFGR_PLLSAI1N_Pos) - -#if defined(RCC_PLLSAI1M_DIV_1_16_SUPPORT) - -/** @brief Macro to configure the PLLSAI1 input clock division factor M. - * - * @note This function must be used only when the PLLSAI1 is disabled. - * @note PLLSAI1 clock source is common with the main PLL (configured through - * __HAL_RCC_PLL_CONFIG() macro) - * - * @param __PLLSAI1M__ specifies the division factor for PLLSAI1 clock. - * This parameter must be a number between Min_Data = 1 and Max_Data = 16. - * - * @retval None - */ - -#define __HAL_RCC_PLLSAI1_DIVM_CONFIG(__PLLSAI1M__) \ - MODIFY_REG(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1M, ((__PLLSAI1M__) - 1U) << RCC_PLLSAI1CFGR_PLLSAI1M_Pos) - -#endif /* RCC_PLLSAI1M_DIV_1_16_SUPPORT */ - -/** @brief Macro to configure the PLLSAI1 clock division factor P. - * - * @note This function must be used only when the PLLSAI1 is disabled. - * @note PLLSAI1 clock source is common with the main PLL (configured through - * __HAL_RCC_PLL_CONFIG() macro) - * - * @param __PLLSAI1P__ specifies the division factor for SAI clock. - * This parameter must be a number in the range (7 or 17) for STM32L47xxx/L48xxx - * else (2 to 31). - * Use to set SAI1 clock frequency = f(PLLSAI1) / PLLSAI1P - * - * @retval None - */ -#if defined(RCC_PLLSAI1P_DIV_2_31_SUPPORT) - -#define __HAL_RCC_PLLSAI1_DIVP_CONFIG(__PLLSAI1P__) \ - MODIFY_REG(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1PDIV, (__PLLSAI1P__) << RCC_PLLSAI1CFGR_PLLSAI1PDIV_Pos) - -#else - -#define __HAL_RCC_PLLSAI1_DIVP_CONFIG(__PLLSAI1P__) \ - MODIFY_REG(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1P, ((__PLLSAI1P__) >> 4U) << RCC_PLLSAI1CFGR_PLLSAI1P_Pos) - -#endif /* RCC_PLLSAI1P_DIV_2_31_SUPPORT */ - -/** @brief Macro to configure the PLLSAI1 clock division factor Q. - * - * @note This function must be used only when the PLLSAI1 is disabled. - * @note PLLSAI1 clock source is common with the main PLL (configured through - * __HAL_RCC_PLL_CONFIG() macro) - * - * @param __PLLSAI1Q__ specifies the division factor for USB/RNG/SDMMC1 clock. - * This parameter must be in the range (2, 4, 6 or 8). - * Use to set USB/RNG/SDMMC1 clock frequency = f(PLLSAI1) / PLLSAI1Q - * - * @retval None - */ -#define __HAL_RCC_PLLSAI1_DIVQ_CONFIG(__PLLSAI1Q__) \ - MODIFY_REG(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1Q, (((__PLLSAI1Q__) >> 1U) - 1U) << RCC_PLLSAI1CFGR_PLLSAI1Q_Pos) - -/** @brief Macro to configure the PLLSAI1 clock division factor R. - * - * @note This function must be used only when the PLLSAI1 is disabled. - * @note PLLSAI1 clock source is common with the main PLL (configured through - * __HAL_RCC_PLL_CONFIG() macro) - * - * @param __PLLSAI1R__ specifies the division factor for ADC clock. - * This parameter must be in the range (2, 4, 6 or 8) - * Use to set ADC clock frequency = f(PLLSAI1) / PLLSAI1R - * - * @retval None - */ -#define __HAL_RCC_PLLSAI1_DIVR_CONFIG(__PLLSAI1R__) \ - MODIFY_REG(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1R, (((__PLLSAI1R__) >> 1U) - 1U) << RCC_PLLSAI1CFGR_PLLSAI1R_Pos) - -/** - * @brief Macros to enable or disable the PLLSAI1. - * @note The PLLSAI1 is disabled by hardware when entering STOP and STANDBY modes. - * @retval None - */ - -#define __HAL_RCC_PLLSAI1_ENABLE() SET_BIT(RCC->CR, RCC_CR_PLLSAI1ON) - -#define __HAL_RCC_PLLSAI1_DISABLE() CLEAR_BIT(RCC->CR, RCC_CR_PLLSAI1ON) - -/** - * @brief Macros to enable or disable each clock output (PLLSAI1_SAI1, PLLSAI1_USB2 and PLLSAI1_ADC1). - * @note Enabling and disabling those clocks can be done without the need to stop the PLL. - * This is mainly used to save Power. - * @param __PLLSAI1_CLOCKOUT__ specifies the PLLSAI1 clock to be output. - * This parameter can be one or a combination of the following values: - * @arg @ref RCC_PLLSAI1_SAI1CLK This clock is used to generate an accurate clock to achieve - * high-quality audio performance on SAI interface in case. - * @arg @ref RCC_PLLSAI1_48M2CLK This clock is used to generate the clock for the USB OTG FS (48 MHz), - * the random number generator (<=48 MHz) and the SDIO (<= 48 MHz). - * @arg @ref RCC_PLLSAI1_ADC1CLK Clock used to clock ADC peripheral. - * @retval None - */ - -#define __HAL_RCC_PLLSAI1CLKOUT_ENABLE(__PLLSAI1_CLOCKOUT__) SET_BIT(RCC->PLLSAI1CFGR, (__PLLSAI1_CLOCKOUT__)) - -#define __HAL_RCC_PLLSAI1CLKOUT_DISABLE(__PLLSAI1_CLOCKOUT__) CLEAR_BIT(RCC->PLLSAI1CFGR, (__PLLSAI1_CLOCKOUT__)) - -/** - * @brief Macro to get clock output enable status (PLLSAI1_SAI1, PLLSAI1_USB2 and PLLSAI1_ADC1). - * @param __PLLSAI1_CLOCKOUT__ specifies the PLLSAI1 clock to be output. - * This parameter can be one of the following values: - * @arg @ref RCC_PLLSAI1_SAI1CLK This clock is used to generate an accurate clock to achieve - * high-quality audio performance on SAI interface in case. - * @arg @ref RCC_PLLSAI1_48M2CLK This clock is used to generate the clock for the USB OTG FS (48 MHz), - * the random number generator (<=48 MHz) and the SDIO (<= 48 MHz). - * @arg @ref RCC_PLLSAI1_ADC1CLK Clock used to clock ADC peripheral. - * @retval SET / RESET - */ -#define __HAL_RCC_GET_PLLSAI1CLKOUT_CONFIG(__PLLSAI1_CLOCKOUT__) READ_BIT(RCC->PLLSAI1CFGR, (__PLLSAI1_CLOCKOUT__)) - -#endif /* RCC_PLLSAI1_SUPPORT */ - -#if defined(RCC_PLLSAI2_SUPPORT) - -/** - * @brief Macro to configure the PLLSAI2 clock multiplication and division factors. - * - * @note This function must be used only when the PLLSAI2 is disabled. - * @note PLLSAI2 clock source is common with the main PLL (configured through - * __HAL_RCC_PLL_CONFIG() macro) - * - @if STM32L4S9xx - * @param __PLLSAI2M__ specifies the division factor of PLLSAI2 input clock. - * This parameter must be a number between Min_Data = 1 and Max_Data = 16. - * - @endif - * @param __PLLSAI2N__ specifies the multiplication factor for PLLSAI2 VCO output clock. - * This parameter must be a number between 8 and 86. - * @note You have to set the PLLSAI2N parameter correctly to ensure that the VCO - * output frequency is between 64 and 344 MHz. - * - * @param __PLLSAI2P__ specifies the division factor for SAI clock. - * This parameter must be a number in the range (7 or 17) for STM32L47xxx/L48xxx - * else (2 to 31). - * SAI2 clock frequency = f(PLLSAI2) / PLLSAI2P - * - @if STM32L4S9xx - * @param __PLLSAI2Q__ specifies the division factor for DSI clock. - * This parameter must be in the range (2, 4, 6 or 8). - * DSI clock frequency = f(PLLSAI2) / PLLSAI2Q - * - @endif - * @param __PLLSAI2R__ specifies the division factor for SAR ADC clock. - * This parameter must be in the range (2, 4, 6 or 8). - * - * @retval None - */ - -#if defined(RCC_PLLSAI2M_DIV_1_16_SUPPORT) - -# if defined(RCC_PLLSAI2P_DIV_2_31_SUPPORT) && defined(RCC_PLLSAI2Q_DIV_SUPPORT) - -#define __HAL_RCC_PLLSAI2_CONFIG(__PLLSAI2M__, __PLLSAI2N__, __PLLSAI2P__, __PLLSAI2Q__, __PLLSAI2R__) \ - MODIFY_REG(RCC->PLLSAI2CFGR, \ - (RCC_PLLSAI2CFGR_PLLSAI2M | RCC_PLLSAI2CFGR_PLLSAI2N | RCC_PLLSAI2CFGR_PLLSAI2P | \ - RCC_PLLSAI2CFGR_PLLSAI2Q | RCC_PLLSAI2CFGR_PLLSAI2R | RCC_PLLSAI2CFGR_PLLSAI2PDIV), \ - ((((__PLLSAI2M__) - 1U) << RCC_PLLSAI2CFGR_PLLSAI2M_Pos) | \ - ((__PLLSAI2N__) << RCC_PLLSAI2CFGR_PLLSAI2N_Pos) | \ - ((((__PLLSAI2Q__) >> 1U) - 1U) << RCC_PLLSAI2CFGR_PLLSAI2Q_Pos) | \ - ((((__PLLSAI2R__) >> 1U) - 1U) << RCC_PLLSAI2CFGR_PLLSAI2R_Pos) | \ - ((uint32_t)(__PLLSAI2P__) << RCC_PLLSAI2CFGR_PLLSAI2PDIV_Pos))) - -# elif defined(RCC_PLLSAI2P_DIV_2_31_SUPPORT) - -#define __HAL_RCC_PLLSAI2_CONFIG(__PLLSAI2M__, __PLLSAI2N__, __PLLSAI2P__, __PLLSAI2R__) \ - MODIFY_REG(RCC->PLLSAI2CFGR, \ - (RCC_PLLSAI2CFGR_PLLSAI2M | RCC_PLLSAI2CFGR_PLLSAI2N | RCC_PLLSAI2CFGR_PLLSAI2P | \ - RCC_PLLSAI2CFGR_PLLSAI2R | RCC_PLLSAI2CFGR_PLLSAI2PDIV), \ - ((((__PLLSAI2M__) - 1U) << RCC_PLLSAI2CFGR_PLLSAI2M_Pos) | \ - ((__PLLSAI2N__) << RCC_PLLSAI2CFGR_PLLSAI2N_Pos) | \ - ((((__PLLSAI2R__) >> 1U) - 1U) << RCC_PLLSAI2CFGR_PLLSAI2R_Pos) | \ - ((uint32_t)(__PLLSAI2P__) << RCC_PLLSAI2CFGR_PLLSAI2PDIV_Pos))) - -# else - -#define __HAL_RCC_PLLSAI2_CONFIG(__PLLSAI2M__, __PLLSAI2N__, __PLLSAI2P__, __PLLSAI2R__) \ - MODIFY_REG(RCC->PLLSAI2CFGR, \ - (RCC_PLLSAI2CFGR_PLLSAI2M | RCC_PLLSAI2CFGR_PLLSAI2N | RCC_PLLSAI2CFGR_PLLSAI2P | \ - RCC_PLLSAI2CFGR_PLLSAI2R), \ - ((((__PLLSAI2M__) - 1U) << RCC_PLLSAI2CFGR_PLLSAI2M_Pos) | \ - ((__PLLSAI2N__) << RCC_PLLSAI2CFGR_PLLSAI2N_Pos) | \ - ((((__PLLSAI2R__) >> 1U) - 1U) << RCC_PLLSAI2CFGR_PLLSAI2R_Pos) | \ - (((__PLLSAI2P__) >> 4U) << RCC_PLLSAI2CFGR_PLLSAI2P_Pos))) - -# endif /* RCC_PLLSAI2P_DIV_2_31_SUPPORT && RCC_PLLSAI2Q_DIV_SUPPORT */ - -#else - -# if defined(RCC_PLLSAI2P_DIV_2_31_SUPPORT) && defined(RCC_PLLSAI2Q_DIV_SUPPORT) - -#define __HAL_RCC_PLLSAI2_CONFIG(__PLLSAI2N__, __PLLSAI2P__, __PLLSAI2Q__, __PLLSAI2R__) \ - MODIFY_REG(RCC->PLLSAI2CFGR, \ - (RCC_PLLSAI2CFGR_PLLSAI2N | RCC_PLLSAI2CFGR_PLLSAI2P | \ - RCC_PLLSAI2CFGR_PLLSAI2Q | RCC_PLLSAI2CFGR_PLLSAI2R | RCC_PLLSAI2CFGR_PLLSAI2PDIV), \ - (((__PLLSAI2N__) << RCC_PLLSAI2CFGR_PLLSAI2N_Pos) | \ - ((((__PLLSAI2Q__) >> 1U) - 1U) << RCC_PLLSAI2CFGR_PLLSAI2Q_Pos) | \ - ((((__PLLSAI2R__) >> 1U) - 1U) << RCC_PLLSAI2CFGR_PLLSAI2R_Pos) | \ - ((uint32_t)(__PLLSAI2P__) << RCC_PLLSAI2CFGR_PLLSAI2PDIV_Pos))) - -# elif defined(RCC_PLLSAI2P_DIV_2_31_SUPPORT) - -#define __HAL_RCC_PLLSAI2_CONFIG(__PLLSAI2N__, __PLLSAI2P__, __PLLSAI2R__) \ - MODIFY_REG(RCC->PLLSAI2CFGR, \ - (RCC_PLLSAI2CFGR_PLLSAI2N | RCC_PLLSAI2CFGR_PLLSAI2P | \ - RCC_PLLSAI2CFGR_PLLSAI2R | RCC_PLLSAI2CFGR_PLLSAI2PDIV), \ - (((__PLLSAI2N__) << RCC_PLLSAI2CFGR_PLLSAI2N_Pos) | \ - ((((__PLLSAI2R__) >> 1U) - 1U) << RCC_PLLSAI2CFGR_PLLSAI2R_Pos) | \ - ((uint32_t)(__PLLSAI2P__) << RCC_PLLSAI2CFGR_PLLSAI2PDIV_Pos))) - -# else - -#define __HAL_RCC_PLLSAI2_CONFIG(__PLLSAI2N__, __PLLSAI2P__, __PLLSAI2R__) \ - MODIFY_REG(RCC->PLLSAI2CFGR, \ - (RCC_PLLSAI2CFGR_PLLSAI2N | RCC_PLLSAI2CFGR_PLLSAI2P | \ - RCC_PLLSAI2CFGR_PLLSAI2R), \ - (((__PLLSAI2N__) << RCC_PLLSAI2CFGR_PLLSAI2N_Pos) | \ - ((((__PLLSAI2R__) >> 1U) - 1U) << RCC_PLLSAI2CFGR_PLLSAI2R_Pos) | \ - (((__PLLSAI2P__) >> 4U) << RCC_PLLSAI2CFGR_PLLSAI2P_Pos))) - -# endif /* RCC_PLLSAI2P_DIV_2_31_SUPPORT && RCC_PLLSAI2Q_DIV_SUPPORT */ - -#endif /* RCC_PLLSAI2M_DIV_1_16_SUPPORT */ - - -/** - * @brief Macro to configure the PLLSAI2 clock multiplication factor N. - * - * @note This function must be used only when the PLLSAI2 is disabled. - * @note PLLSAI2 clock source is common with the main PLL (configured through - * __HAL_RCC_PLL_CONFIG() macro) - * - * @param __PLLSAI2N__ specifies the multiplication factor for PLLSAI2 VCO output clock. - * This parameter must be a number between 8 and 86. - * @note You have to set the PLLSAI2N parameter correctly to ensure that the VCO - * output frequency is between 64 and 344 MHz. - * PLLSAI1 clock frequency = f(PLLSAI1) multiplied by PLLSAI2N - * - * @retval None - */ -#define __HAL_RCC_PLLSAI2_MULN_CONFIG(__PLLSAI2N__) \ - MODIFY_REG(RCC->PLLSAI2CFGR, RCC_PLLSAI2CFGR_PLLSAI2N, (__PLLSAI2N__) << RCC_PLLSAI2CFGR_PLLSAI2N_Pos) - -#if defined(RCC_PLLSAI2M_DIV_1_16_SUPPORT) - -/** @brief Macro to configure the PLLSAI2 input clock division factor M. - * - * @note This function must be used only when the PLLSAI2 is disabled. - * @note PLLSAI2 clock source is common with the main PLL (configured through - * __HAL_RCC_PLL_CONFIG() macro) - * - * @param __PLLSAI2M__ specifies the division factor for PLLSAI2 clock. - * This parameter must be a number between Min_Data = 1 and Max_Data = 16. - * - * @retval None - */ - -#define __HAL_RCC_PLLSAI2_DIVM_CONFIG(__PLLSAI2M__) \ - MODIFY_REG(RCC->PLLSAI2CFGR, RCC_PLLSAI2CFGR_PLLSAI2M, ((__PLLSAI2M__) - 1U) << RCC_PLLSAI2CFGR_PLLSAI2M_Pos) - -#endif /* RCC_PLLSAI2M_DIV_1_16_SUPPORT */ - -/** @brief Macro to configure the PLLSAI2 clock division factor P. - * - * @note This function must be used only when the PLLSAI2 is disabled. - * @note PLLSAI2 clock source is common with the main PLL (configured through - * __HAL_RCC_PLL_CONFIG() macro) - * - * @param __PLLSAI2P__ specifies the division factor. - * This parameter must be a number in the range (7 or 17). - * Use to set SAI2 clock frequency = f(PLLSAI2) / __PLLSAI2P__ - * - * @retval None - */ -#define __HAL_RCC_PLLSAI2_DIVP_CONFIG(__PLLSAI2P__) \ - MODIFY_REG(RCC->PLLSAI2CFGR, RCC_PLLSAI2CFGR_PLLSAI2P, ((__PLLSAI2P__) >> 4U) << RCC_PLLSAI2CFGR_PLLSAI2P_Pos) - -#if defined(RCC_PLLSAI2Q_DIV_SUPPORT) - -/** @brief Macro to configure the PLLSAI2 clock division factor Q. - * - * @note This function must be used only when the PLLSAI2 is disabled. - * @note PLLSAI2 clock source is common with the main PLL (configured through - * __HAL_RCC_PLL_CONFIG() macro) - * - * @param __PLLSAI2Q__ specifies the division factor for USB/RNG/SDMMC1 clock. - * This parameter must be in the range (2, 4, 6 or 8). - * Use to set USB/RNG/SDMMC1 clock frequency = f(PLLSAI2) / PLLSAI2Q - * - * @retval None - */ -#define __HAL_RCC_PLLSAI2_DIVQ_CONFIG(__PLLSAI2Q__) \ - MODIFY_REG(RCC->PLLSAI2CFGR, RCC_PLLSAI2CFGR_PLLSAI2Q, (((__PLLSAI2Q__) >> 1U) - 1U) << RCC_PLLSAI2CFGR_PLLSAI2Q_Pos) - -#endif /* RCC_PLLSAI2Q_DIV_SUPPORT */ - -/** @brief Macro to configure the PLLSAI2 clock division factor R. - * - * @note This function must be used only when the PLLSAI2 is disabled. - * @note PLLSAI2 clock source is common with the main PLL (configured through - * __HAL_RCC_PLL_CONFIG() macro) - * - * @param __PLLSAI2R__ specifies the division factor. - * This parameter must be in the range (2, 4, 6 or 8). - * Use to set ADC clock frequency = f(PLLSAI2) / __PLLSAI2R__ - * - * @retval None - */ -#define __HAL_RCC_PLLSAI2_DIVR_CONFIG(__PLLSAI2R__) \ - MODIFY_REG(RCC->PLLSAI2CFGR, RCC_PLLSAI2CFGR_PLLSAI2R, (((__PLLSAI2R__) >> 1U) - 1U) << RCC_PLLSAI2CFGR_PLLSAI2R_Pos) - -/** - * @brief Macros to enable or disable the PLLSAI2. - * @note The PLLSAI2 is disabled by hardware when entering STOP and STANDBY modes. - * @retval None - */ - -#define __HAL_RCC_PLLSAI2_ENABLE() SET_BIT(RCC->CR, RCC_CR_PLLSAI2ON) - -#define __HAL_RCC_PLLSAI2_DISABLE() CLEAR_BIT(RCC->CR, RCC_CR_PLLSAI2ON) - -/** - * @brief Macros to enable or disable each clock output (PLLSAI2_SAI2, PLLSAI2_ADC2 and RCC_PLLSAI2_DSICLK). - * @note Enabling and disabling those clocks can be done without the need to stop the PLL. - * This is mainly used to save Power. - * @param __PLLSAI2_CLOCKOUT__ specifies the PLLSAI2 clock to be output. - * This parameter can be one or a combination of the following values: - @if STM32L486xx - * @arg @ref RCC_PLLSAI2_SAI2CLK This clock is used to generate an accurate clock to achieve - * high-quality audio performance on SAI interface in case. - * @arg @ref RCC_PLLSAI2_ADC2CLK Clock used to clock ADC peripheral. - @endif - @if STM32L4A6xx - * @arg @ref RCC_PLLSAI2_SAI2CLK This clock is used to generate an accurate clock to achieve - * high-quality audio performance on SAI interface in case. - * @arg @ref RCC_PLLSAI2_ADC2CLK Clock used to clock ADC peripheral. - @endif - @if STM32L4S9xx - * @arg @ref RCC_PLLSAI2_SAI2CLK This clock is used to generate an accurate clock to achieve - * high-quality audio performance on SAI interface in case. - * @arg @ref RCC_PLLSAI2_DSICLK Clock used to clock DSI peripheral. - @endif - * @retval None - */ - -#define __HAL_RCC_PLLSAI2CLKOUT_ENABLE(__PLLSAI2_CLOCKOUT__) SET_BIT(RCC->PLLSAI2CFGR, (__PLLSAI2_CLOCKOUT__)) - -#define __HAL_RCC_PLLSAI2CLKOUT_DISABLE(__PLLSAI2_CLOCKOUT__) CLEAR_BIT(RCC->PLLSAI2CFGR, (__PLLSAI2_CLOCKOUT__)) - -/** - * @brief Macro to get clock output enable status (PLLSAI2_SAI2, PLLSAI2_ADC2 and RCC_PLLSAI2_DSICLK). - * @param __PLLSAI2_CLOCKOUT__ specifies the PLLSAI2 clock to be output. - * This parameter can be one of the following values: - @if STM32L486xx - * @arg @ref RCC_PLLSAI2_SAI2CLK This clock is used to generate an accurate clock to achieve - * high-quality audio performance on SAI interface in case. - * @arg @ref RCC_PLLSAI2_ADC2CLK Clock used to clock ADC peripheral. - @endif - @if STM32L4A6xx - * @arg @ref RCC_PLLSAI2_SAI2CLK This clock is used to generate an accurate clock to achieve - * high-quality audio performance on SAI interface in case. - * @arg @ref RCC_PLLSAI2_ADC2CLK Clock used to clock ADC peripheral. - @endif - @if STM32L4S9xx - * @arg @ref RCC_PLLSAI2_SAI2CLK This clock is used to generate an accurate clock to achieve - * high-quality audio performance on SAI interface in case. - * @arg @ref RCC_PLLSAI2_DSICLK Clock used to clock DSI peripheral. - @endif - * @retval SET / RESET - */ -#define __HAL_RCC_GET_PLLSAI2CLKOUT_CONFIG(__PLLSAI2_CLOCKOUT__) READ_BIT(RCC->PLLSAI2CFGR, (__PLLSAI2_CLOCKOUT__)) - -#endif /* RCC_PLLSAI2_SUPPORT */ - -#if defined(SAI1) - -/** - * @brief Macro to configure the SAI1 clock source. - * @param __SAI1_CLKSOURCE__ defines the SAI1 clock source. This clock is derived - * from the PLLSAI1, system PLL or external clock (through a dedicated pin). - * This parameter can be one of the following values: - * @arg @ref RCC_SAI1CLKSOURCE_PLLSAI1 SAI1 clock = PLLSAI1 "P" clock (PLLSAI1CLK) - @if STM32L486xx - * @arg @ref RCC_SAI1CLKSOURCE_PLLSAI2 SAI1 clock = PLLSAI2 "P" clock (PLLSAI2CLK) for devices with PLLSAI2 - @endif - * @arg @ref RCC_SAI1CLKSOURCE_PLL SAI1 clock = PLL "P" clock (PLLSAI3CLK if PLLSAI2 exists, else PLLSAI2CLK) - * @arg @ref RCC_SAI1CLKSOURCE_PIN SAI1 clock = External Clock (SAI1_EXTCLK) - @if STM32L4S9xx - * @arg @ref RCC_SAI1CLKSOURCE_HSI SAI1 clock = HSI16 - @endif - * - @if STM32L443xx - * @note HSI16 is automatically set as SAI1 clock source when PLL are disabled for devices without PLLSAI2. - @endif - * - * @retval None - */ -#if defined(STM32L4P5xx) || defined(STM32L4Q5xx) || defined(STM32L4R5xx) || defined(STM32L4R7xx) || defined(STM32L4R9xx) || defined(STM32L4S5xx) || defined(STM32L4S7xx) || defined(STM32L4S9xx) -#define __HAL_RCC_SAI1_CONFIG(__SAI1_CLKSOURCE__)\ - MODIFY_REG(RCC->CCIPR2, RCC_CCIPR2_SAI1SEL, (__SAI1_CLKSOURCE__)) -#else -#define __HAL_RCC_SAI1_CONFIG(__SAI1_CLKSOURCE__)\ - MODIFY_REG(RCC->CCIPR, RCC_CCIPR_SAI1SEL, (__SAI1_CLKSOURCE__)) -#endif /* STM32L4P5xx || STM32L4Q5xx || STM32L4R5xx || STM32L4R7xx || STM32L4R9xx || STM32L4S5xx || STM32L4S7xx || STM32L4S9xx */ - -/** @brief Macro to get the SAI1 clock source. - * @retval The clock source can be one of the following values: - * @arg @ref RCC_SAI1CLKSOURCE_PLLSAI1 SAI1 clock = PLLSAI1 "P" clock (PLLSAI1CLK) - @if STM32L486xx - * @arg @ref RCC_SAI1CLKSOURCE_PLLSAI2 SAI1 clock = PLLSAI2 "P" clock (PLLSAI2CLK) for devices with PLLSAI2 - @endif - * @arg @ref RCC_SAI1CLKSOURCE_PLL SAI1 clock = PLL "P" clock (PLLSAI3CLK if PLLSAI2 exists, else PLLSAI2CLK) - * @arg @ref RCC_SAI1CLKSOURCE_PIN SAI1 clock = External Clock (SAI1_EXTCLK) - * - * @note Despite returned values RCC_SAI1CLKSOURCE_PLLSAI1 or RCC_SAI1CLKSOURCE_PLL, HSI16 is automatically set as SAI1 - * clock source when PLLs are disabled for devices without PLLSAI2. - * - */ -#if defined(STM32L4P5xx) || defined(STM32L4Q5xx) || defined(STM32L4R5xx) || defined(STM32L4R7xx) || defined(STM32L4R9xx) || defined(STM32L4S5xx) || defined(STM32L4S7xx) || defined(STM32L4S9xx) -#define __HAL_RCC_GET_SAI1_SOURCE() (READ_BIT(RCC->CCIPR2, RCC_CCIPR2_SAI1SEL)) -#else -#define __HAL_RCC_GET_SAI1_SOURCE() (READ_BIT(RCC->CCIPR, RCC_CCIPR_SAI1SEL)) -#endif /* STM32L4P5xx || STM32L4Q5xx || STM32L4R5xx || STM32L4R7xx || STM32L4R9xx || STM32L4S5xx || STM32L4S7xx || STM32L4S9xx */ - -#endif /* SAI1 */ - -#if defined(SAI2) - -/** - * @brief Macro to configure the SAI2 clock source. - * @param __SAI2_CLKSOURCE__ defines the SAI2 clock source. This clock is derived - * from the PLLSAI2, system PLL or external clock (through a dedicated pin). - * This parameter can be one of the following values: - * @arg @ref RCC_SAI2CLKSOURCE_PLLSAI1 SAI2 clock = PLLSAI1 "P" clock (PLLSAI1CLK) - * @arg @ref RCC_SAI2CLKSOURCE_PLLSAI2 SAI2 clock = PLLSAI2 "P" clock (PLLSAI2CLK) - * @arg @ref RCC_SAI2CLKSOURCE_PLL SAI2 clock = PLL "P" clock (PLLSAI3CLK) - * @arg @ref RCC_SAI2CLKSOURCE_PIN SAI2 clock = External Clock (SAI2_EXTCLK) - @if STM32L4S9xx - * @arg @ref RCC_SAI2CLKSOURCE_HSI SAI2 clock = HSI16 - @endif - * - * @retval None - */ -#if defined(STM32L4P5xx) || defined(STM32L4Q5xx) || defined(STM32L4R5xx) || defined(STM32L4R7xx) || defined(STM32L4R9xx) || defined(STM32L4S5xx) || defined(STM32L4S7xx) || defined(STM32L4S9xx) -#define __HAL_RCC_SAI2_CONFIG(__SAI2_CLKSOURCE__ )\ - MODIFY_REG(RCC->CCIPR2, RCC_CCIPR2_SAI2SEL, (__SAI2_CLKSOURCE__)) -#else -#define __HAL_RCC_SAI2_CONFIG(__SAI2_CLKSOURCE__ )\ - MODIFY_REG(RCC->CCIPR, RCC_CCIPR_SAI2SEL, (__SAI2_CLKSOURCE__)) -#endif /* STM32L4P5xx || STM32L4Q5xx || STM32L4R5xx || STM32L4R7xx || STM32L4R9xx || STM32L4S5xx || STM32L4S7xx || STM32L4S9xx */ - -/** @brief Macro to get the SAI2 clock source. - * @retval The clock source can be one of the following values: - * @arg @ref RCC_SAI2CLKSOURCE_PLLSAI1 SAI2 clock = PLLSAI1 "P" clock (PLLSAI1CLK) - * @arg @ref RCC_SAI2CLKSOURCE_PLLSAI2 SAI2 clock = PLLSAI2 "P" clock (PLLSAI2CLK) - * @arg @ref RCC_SAI2CLKSOURCE_PLL SAI2 clock = PLL "P" clock (PLLSAI3CLK) - * @arg @ref RCC_SAI2CLKSOURCE_PIN SAI2 clock = External Clock (SAI2_EXTCLK) - */ -#if defined(STM32L4P5xx) || defined(STM32L4Q5xx) || defined(STM32L4R5xx) || defined(STM32L4R7xx) || defined(STM32L4R9xx) || defined(STM32L4S5xx) || defined(STM32L4S7xx) || defined(STM32L4S9xx) -#define __HAL_RCC_GET_SAI2_SOURCE() (READ_BIT(RCC->CCIPR2, RCC_CCIPR2_SAI2SEL)) -#else -#define __HAL_RCC_GET_SAI2_SOURCE() (READ_BIT(RCC->CCIPR, RCC_CCIPR_SAI2SEL)) -#endif /* STM32L4P5xx || STM32L4Q5xx || STM32L4R5xx || STM32L4R7xx || STM32L4R9xx || STM32L4S5xx || STM32L4S7xx || STM32L4S9xx */ - -#endif /* SAI2 */ - -/** @brief Macro to configure the I2C1 clock (I2C1CLK). - * - * @param __I2C1_CLKSOURCE__ specifies the I2C1 clock source. - * This parameter can be one of the following values: - * @arg @ref RCC_I2C1CLKSOURCE_PCLK1 PCLK1 selected as I2C1 clock - * @arg @ref RCC_I2C1CLKSOURCE_HSI HSI selected as I2C1 clock - * @arg @ref RCC_I2C1CLKSOURCE_SYSCLK System Clock selected as I2C1 clock - * @retval None - */ -#define __HAL_RCC_I2C1_CONFIG(__I2C1_CLKSOURCE__) \ - MODIFY_REG(RCC->CCIPR, RCC_CCIPR_I2C1SEL, (__I2C1_CLKSOURCE__)) - -/** @brief Macro to get the I2C1 clock source. - * @retval The clock source can be one of the following values: - * @arg @ref RCC_I2C1CLKSOURCE_PCLK1 PCLK1 selected as I2C1 clock - * @arg @ref RCC_I2C1CLKSOURCE_HSI HSI selected as I2C1 clock - * @arg @ref RCC_I2C1CLKSOURCE_SYSCLK System Clock selected as I2C1 clock - */ -#define __HAL_RCC_GET_I2C1_SOURCE() (READ_BIT(RCC->CCIPR, RCC_CCIPR_I2C1SEL)) - -#if defined(I2C2) - -/** @brief Macro to configure the I2C2 clock (I2C2CLK). - * - * @param __I2C2_CLKSOURCE__ specifies the I2C2 clock source. - * This parameter can be one of the following values: - * @arg @ref RCC_I2C2CLKSOURCE_PCLK1 PCLK1 selected as I2C2 clock - * @arg @ref RCC_I2C2CLKSOURCE_HSI HSI selected as I2C2 clock - * @arg @ref RCC_I2C2CLKSOURCE_SYSCLK System Clock selected as I2C2 clock - * @retval None - */ -#define __HAL_RCC_I2C2_CONFIG(__I2C2_CLKSOURCE__) \ - MODIFY_REG(RCC->CCIPR, RCC_CCIPR_I2C2SEL, (__I2C2_CLKSOURCE__)) - -/** @brief Macro to get the I2C2 clock source. - * @retval The clock source can be one of the following values: - * @arg @ref RCC_I2C2CLKSOURCE_PCLK1 PCLK1 selected as I2C2 clock - * @arg @ref RCC_I2C2CLKSOURCE_HSI HSI selected as I2C2 clock - * @arg @ref RCC_I2C2CLKSOURCE_SYSCLK System Clock selected as I2C2 clock - */ -#define __HAL_RCC_GET_I2C2_SOURCE() (READ_BIT(RCC->CCIPR, RCC_CCIPR_I2C2SEL)) - -#endif /* I2C2 */ - -/** @brief Macro to configure the I2C3 clock (I2C3CLK). - * - * @param __I2C3_CLKSOURCE__ specifies the I2C3 clock source. - * This parameter can be one of the following values: - * @arg @ref RCC_I2C3CLKSOURCE_PCLK1 PCLK1 selected as I2C3 clock - * @arg @ref RCC_I2C3CLKSOURCE_HSI HSI selected as I2C3 clock - * @arg @ref RCC_I2C3CLKSOURCE_SYSCLK System Clock selected as I2C3 clock - * @retval None - */ -#define __HAL_RCC_I2C3_CONFIG(__I2C3_CLKSOURCE__) \ - MODIFY_REG(RCC->CCIPR, RCC_CCIPR_I2C3SEL, (__I2C3_CLKSOURCE__)) - -/** @brief Macro to get the I2C3 clock source. - * @retval The clock source can be one of the following values: - * @arg @ref RCC_I2C3CLKSOURCE_PCLK1 PCLK1 selected as I2C3 clock - * @arg @ref RCC_I2C3CLKSOURCE_HSI HSI selected as I2C3 clock - * @arg @ref RCC_I2C3CLKSOURCE_SYSCLK System Clock selected as I2C3 clock - */ -#define __HAL_RCC_GET_I2C3_SOURCE() (READ_BIT(RCC->CCIPR, RCC_CCIPR_I2C3SEL)) - -#if defined(I2C4) - -/** @brief Macro to configure the I2C4 clock (I2C4CLK). - * - * @param __I2C4_CLKSOURCE__ specifies the I2C4 clock source. - * This parameter can be one of the following values: - * @arg @ref RCC_I2C4CLKSOURCE_PCLK1 PCLK1 selected as I2C4 clock - * @arg @ref RCC_I2C4CLKSOURCE_HSI HSI selected as I2C4 clock - * @arg @ref RCC_I2C4CLKSOURCE_SYSCLK System Clock selected as I2C4 clock - * @retval None - */ -#define __HAL_RCC_I2C4_CONFIG(__I2C4_CLKSOURCE__) \ - MODIFY_REG(RCC->CCIPR2, RCC_CCIPR2_I2C4SEL, (__I2C4_CLKSOURCE__)) - -/** @brief Macro to get the I2C4 clock source. - * @retval The clock source can be one of the following values: - * @arg @ref RCC_I2C4CLKSOURCE_PCLK1 PCLK1 selected as I2C4 clock - * @arg @ref RCC_I2C4CLKSOURCE_HSI HSI selected as I2C4 clock - * @arg @ref RCC_I2C4CLKSOURCE_SYSCLK System Clock selected as I2C4 clock - */ -#define __HAL_RCC_GET_I2C4_SOURCE() (READ_BIT(RCC->CCIPR2, RCC_CCIPR2_I2C4SEL)) - -#endif /* I2C4 */ - - -/** @brief Macro to configure the USART1 clock (USART1CLK). - * - * @param __USART1_CLKSOURCE__ specifies the USART1 clock source. - * This parameter can be one of the following values: - * @arg @ref RCC_USART1CLKSOURCE_PCLK2 PCLK2 selected as USART1 clock - * @arg @ref RCC_USART1CLKSOURCE_HSI HSI selected as USART1 clock - * @arg @ref RCC_USART1CLKSOURCE_SYSCLK System Clock selected as USART1 clock - * @arg @ref RCC_USART1CLKSOURCE_LSE SE selected as USART1 clock - * @retval None - */ -#define __HAL_RCC_USART1_CONFIG(__USART1_CLKSOURCE__) \ - MODIFY_REG(RCC->CCIPR, RCC_CCIPR_USART1SEL, (__USART1_CLKSOURCE__)) - -/** @brief Macro to get the USART1 clock source. - * @retval The clock source can be one of the following values: - * @arg @ref RCC_USART1CLKSOURCE_PCLK2 PCLK2 selected as USART1 clock - * @arg @ref RCC_USART1CLKSOURCE_HSI HSI selected as USART1 clock - * @arg @ref RCC_USART1CLKSOURCE_SYSCLK System Clock selected as USART1 clock - * @arg @ref RCC_USART1CLKSOURCE_LSE LSE selected as USART1 clock - */ -#define __HAL_RCC_GET_USART1_SOURCE() (READ_BIT(RCC->CCIPR, RCC_CCIPR_USART1SEL)) - -/** @brief Macro to configure the USART2 clock (USART2CLK). - * - * @param __USART2_CLKSOURCE__ specifies the USART2 clock source. - * This parameter can be one of the following values: - * @arg @ref RCC_USART2CLKSOURCE_PCLK1 PCLK1 selected as USART2 clock - * @arg @ref RCC_USART2CLKSOURCE_HSI HSI selected as USART2 clock - * @arg @ref RCC_USART2CLKSOURCE_SYSCLK System Clock selected as USART2 clock - * @arg @ref RCC_USART2CLKSOURCE_LSE LSE selected as USART2 clock - * @retval None - */ -#define __HAL_RCC_USART2_CONFIG(__USART2_CLKSOURCE__) \ - MODIFY_REG(RCC->CCIPR, RCC_CCIPR_USART2SEL, (__USART2_CLKSOURCE__)) - -/** @brief Macro to get the USART2 clock source. - * @retval The clock source can be one of the following values: - * @arg @ref RCC_USART2CLKSOURCE_PCLK1 PCLK1 selected as USART2 clock - * @arg @ref RCC_USART2CLKSOURCE_HSI HSI selected as USART2 clock - * @arg @ref RCC_USART2CLKSOURCE_SYSCLK System Clock selected as USART2 clock - * @arg @ref RCC_USART2CLKSOURCE_LSE LSE selected as USART2 clock - */ -#define __HAL_RCC_GET_USART2_SOURCE() (READ_BIT(RCC->CCIPR, RCC_CCIPR_USART2SEL)) - -#if defined(USART3) - -/** @brief Macro to configure the USART3 clock (USART3CLK). - * - * @param __USART3_CLKSOURCE__ specifies the USART3 clock source. - * This parameter can be one of the following values: - * @arg @ref RCC_USART3CLKSOURCE_PCLK1 PCLK1 selected as USART3 clock - * @arg @ref RCC_USART3CLKSOURCE_HSI HSI selected as USART3 clock - * @arg @ref RCC_USART3CLKSOURCE_SYSCLK System Clock selected as USART3 clock - * @arg @ref RCC_USART3CLKSOURCE_LSE LSE selected as USART3 clock - * @retval None - */ -#define __HAL_RCC_USART3_CONFIG(__USART3_CLKSOURCE__) \ - MODIFY_REG(RCC->CCIPR, RCC_CCIPR_USART3SEL, (__USART3_CLKSOURCE__)) - -/** @brief Macro to get the USART3 clock source. - * @retval The clock source can be one of the following values: - * @arg @ref RCC_USART3CLKSOURCE_PCLK1 PCLK1 selected as USART3 clock - * @arg @ref RCC_USART3CLKSOURCE_HSI HSI selected as USART3 clock - * @arg @ref RCC_USART3CLKSOURCE_SYSCLK System Clock selected as USART3 clock - * @arg @ref RCC_USART3CLKSOURCE_LSE LSE selected as USART3 clock - */ -#define __HAL_RCC_GET_USART3_SOURCE() (READ_BIT(RCC->CCIPR, RCC_CCIPR_USART3SEL)) - -#endif /* USART3 */ - -#if defined(UART4) - -/** @brief Macro to configure the UART4 clock (UART4CLK). - * - * @param __UART4_CLKSOURCE__ specifies the UART4 clock source. - * This parameter can be one of the following values: - * @arg @ref RCC_UART4CLKSOURCE_PCLK1 PCLK1 selected as UART4 clock - * @arg @ref RCC_UART4CLKSOURCE_HSI HSI selected as UART4 clock - * @arg @ref RCC_UART4CLKSOURCE_SYSCLK System Clock selected as UART4 clock - * @arg @ref RCC_UART4CLKSOURCE_LSE LSE selected as UART4 clock - * @retval None - */ -#define __HAL_RCC_UART4_CONFIG(__UART4_CLKSOURCE__) \ - MODIFY_REG(RCC->CCIPR, RCC_CCIPR_UART4SEL, (__UART4_CLKSOURCE__)) - -/** @brief Macro to get the UART4 clock source. - * @retval The clock source can be one of the following values: - * @arg @ref RCC_UART4CLKSOURCE_PCLK1 PCLK1 selected as UART4 clock - * @arg @ref RCC_UART4CLKSOURCE_HSI HSI selected as UART4 clock - * @arg @ref RCC_UART4CLKSOURCE_SYSCLK System Clock selected as UART4 clock - * @arg @ref RCC_UART4CLKSOURCE_LSE LSE selected as UART4 clock - */ -#define __HAL_RCC_GET_UART4_SOURCE() (READ_BIT(RCC->CCIPR, RCC_CCIPR_UART4SEL)) - -#endif /* UART4 */ - -#if defined(UART5) - -/** @brief Macro to configure the UART5 clock (UART5CLK). - * - * @param __UART5_CLKSOURCE__ specifies the UART5 clock source. - * This parameter can be one of the following values: - * @arg @ref RCC_UART5CLKSOURCE_PCLK1 PCLK1 selected as UART5 clock - * @arg @ref RCC_UART5CLKSOURCE_HSI HSI selected as UART5 clock - * @arg @ref RCC_UART5CLKSOURCE_SYSCLK System Clock selected as UART5 clock - * @arg @ref RCC_UART5CLKSOURCE_LSE LSE selected as UART5 clock - * @retval None - */ -#define __HAL_RCC_UART5_CONFIG(__UART5_CLKSOURCE__) \ - MODIFY_REG(RCC->CCIPR, RCC_CCIPR_UART5SEL, (__UART5_CLKSOURCE__)) - -/** @brief Macro to get the UART5 clock source. - * @retval The clock source can be one of the following values: - * @arg @ref RCC_UART5CLKSOURCE_PCLK1 PCLK1 selected as UART5 clock - * @arg @ref RCC_UART5CLKSOURCE_HSI HSI selected as UART5 clock - * @arg @ref RCC_UART5CLKSOURCE_SYSCLK System Clock selected as UART5 clock - * @arg @ref RCC_UART5CLKSOURCE_LSE LSE selected as UART5 clock - */ -#define __HAL_RCC_GET_UART5_SOURCE() (READ_BIT(RCC->CCIPR, RCC_CCIPR_UART5SEL)) - -#endif /* UART5 */ - -/** @brief Macro to configure the LPUART1 clock (LPUART1CLK). - * - * @param __LPUART1_CLKSOURCE__ specifies the LPUART1 clock source. - * This parameter can be one of the following values: - * @arg @ref RCC_LPUART1CLKSOURCE_PCLK1 PCLK1 selected as LPUART1 clock - * @arg @ref RCC_LPUART1CLKSOURCE_HSI HSI selected as LPUART1 clock - * @arg @ref RCC_LPUART1CLKSOURCE_SYSCLK System Clock selected as LPUART1 clock - * @arg @ref RCC_LPUART1CLKSOURCE_LSE LSE selected as LPUART1 clock - * @retval None - */ -#define __HAL_RCC_LPUART1_CONFIG(__LPUART1_CLKSOURCE__) \ - MODIFY_REG(RCC->CCIPR, RCC_CCIPR_LPUART1SEL, (__LPUART1_CLKSOURCE__)) - -/** @brief Macro to get the LPUART1 clock source. - * @retval The clock source can be one of the following values: - * @arg @ref RCC_LPUART1CLKSOURCE_PCLK1 PCLK1 selected as LPUART1 clock - * @arg @ref RCC_LPUART1CLKSOURCE_HSI HSI selected as LPUART1 clock - * @arg @ref RCC_LPUART1CLKSOURCE_SYSCLK System Clock selected as LPUART1 clock - * @arg @ref RCC_LPUART1CLKSOURCE_LSE LSE selected as LPUART1 clock - */ -#define __HAL_RCC_GET_LPUART1_SOURCE() (READ_BIT(RCC->CCIPR, RCC_CCIPR_LPUART1SEL)) - -/** @brief Macro to configure the LPTIM1 clock (LPTIM1CLK). - * - * @param __LPTIM1_CLKSOURCE__ specifies the LPTIM1 clock source. - * This parameter can be one of the following values: - * @arg @ref RCC_LPTIM1CLKSOURCE_PCLK1 PCLK1 selected as LPTIM1 clock - * @arg @ref RCC_LPTIM1CLKSOURCE_LSI HSI selected as LPTIM1 clock - * @arg @ref RCC_LPTIM1CLKSOURCE_HSI LSI selected as LPTIM1 clock - * @arg @ref RCC_LPTIM1CLKSOURCE_LSE LSE selected as LPTIM1 clock - * @retval None - */ -#define __HAL_RCC_LPTIM1_CONFIG(__LPTIM1_CLKSOURCE__) \ - MODIFY_REG(RCC->CCIPR, RCC_CCIPR_LPTIM1SEL, (__LPTIM1_CLKSOURCE__)) - -/** @brief Macro to get the LPTIM1 clock source. - * @retval The clock source can be one of the following values: - * @arg @ref RCC_LPTIM1CLKSOURCE_PCLK1 PCLK1 selected as LPUART1 clock - * @arg @ref RCC_LPTIM1CLKSOURCE_LSI HSI selected as LPUART1 clock - * @arg @ref RCC_LPTIM1CLKSOURCE_HSI System Clock selected as LPUART1 clock - * @arg @ref RCC_LPTIM1CLKSOURCE_LSE LSE selected as LPUART1 clock - */ -#define __HAL_RCC_GET_LPTIM1_SOURCE() (READ_BIT(RCC->CCIPR, RCC_CCIPR_LPTIM1SEL)) - -/** @brief Macro to configure the LPTIM2 clock (LPTIM2CLK). - * - * @param __LPTIM2_CLKSOURCE__ specifies the LPTIM2 clock source. - * This parameter can be one of the following values: - * @arg @ref RCC_LPTIM2CLKSOURCE_PCLK1 PCLK1 selected as LPTIM2 clock - * @arg @ref RCC_LPTIM2CLKSOURCE_LSI HSI selected as LPTIM2 clock - * @arg @ref RCC_LPTIM2CLKSOURCE_HSI LSI selected as LPTIM2 clock - * @arg @ref RCC_LPTIM2CLKSOURCE_LSE LSE selected as LPTIM2 clock - * @retval None - */ -#define __HAL_RCC_LPTIM2_CONFIG(__LPTIM2_CLKSOURCE__) \ - MODIFY_REG(RCC->CCIPR, RCC_CCIPR_LPTIM2SEL, (__LPTIM2_CLKSOURCE__)) - -/** @brief Macro to get the LPTIM2 clock source. - * @retval The clock source can be one of the following values: - * @arg @ref RCC_LPTIM2CLKSOURCE_PCLK1 PCLK1 selected as LPUART1 clock - * @arg @ref RCC_LPTIM2CLKSOURCE_LSI HSI selected as LPUART1 clock - * @arg @ref RCC_LPTIM2CLKSOURCE_HSI System Clock selected as LPUART1 clock - * @arg @ref RCC_LPTIM2CLKSOURCE_LSE LSE selected as LPUART1 clock - */ -#define __HAL_RCC_GET_LPTIM2_SOURCE() (READ_BIT(RCC->CCIPR, RCC_CCIPR_LPTIM2SEL)) - -#if defined(SDMMC1) - -/** @brief Macro to configure the SDMMC1 clock. - * - @if STM32L486xx - * @note USB, RNG and SDMMC1 peripherals share the same 48MHz clock source. - @endif - * - @if STM32L443xx - * @note USB, RNG and SDMMC1 peripherals share the same 48MHz clock source. - @endif - * - * @param __SDMMC1_CLKSOURCE__ specifies the SDMMC1 clock source. - * This parameter can be one of the following values: - @if STM32L486xx - * @arg @ref RCC_SDMMC1CLKSOURCE_NONE No clock selected as SDMMC1 clock for devices without HSI48 - * @arg @ref RCC_SDMMC1CLKSOURCE_MSI MSI selected as SDMMC1 clock - * @arg @ref RCC_SDMMC1CLKSOURCE_PLLSAI1 PLLSAI1 "Q" Clock selected as SDMMC1 clock - @endif - @if STM32L443xx - * @arg @ref RCC_SDMMC1CLKSOURCE_HSI48 HSI48 selected as SDMMC1 clock for devices with HSI48 - * @arg @ref RCC_SDMMC1CLKSOURCE_MSI MSI selected as SDMMC1 clock - * @arg @ref RCC_SDMMC1CLKSOURCE_PLLSAI1 PLLSAI1 "Q" Clock selected as SDMMC1 clock - @endif - @if STM32L4S9xx - * @arg @ref RCC_SDMMC1CLKSOURCE_HSI48 HSI48 selected as SDMMC1 clock for devices with HSI48 - * @arg @ref RCC_SDMMC1CLKSOURCE_MSI MSI selected as SDMMC1 clock - * @arg @ref RCC_SDMMC1CLKSOURCE_PLLSAI1 PLLSAI1 "Q" Clock selected as SDMMC1 clock - * @arg @ref RCC_SDMMC1CLKSOURCE_PLLP PLL "P" Clock selected as SDMMC1 clock - @endif - * @arg @ref RCC_SDMMC1CLKSOURCE_PLL PLL "Q" Clock selected as SDMMC1 clock - * @retval None - */ -#if defined(RCC_CCIPR2_SDMMCSEL) -#define __HAL_RCC_SDMMC1_CONFIG(__SDMMC1_CLKSOURCE__) \ - do \ - { \ - if((__SDMMC1_CLKSOURCE__) == RCC_SDMMC1CLKSOURCE_PLLP) \ - { \ - SET_BIT(RCC->CCIPR2, RCC_CCIPR2_SDMMCSEL); \ - } \ - else \ - { \ - CLEAR_BIT(RCC->CCIPR2, RCC_CCIPR2_SDMMCSEL); \ - MODIFY_REG(RCC->CCIPR, RCC_CCIPR_CLK48SEL, (__SDMMC1_CLKSOURCE__)); \ - } \ - } while(0) -#else -#define __HAL_RCC_SDMMC1_CONFIG(__SDMMC1_CLKSOURCE__) \ - MODIFY_REG(RCC->CCIPR, RCC_CCIPR_CLK48SEL, (__SDMMC1_CLKSOURCE__)) -#endif /* RCC_CCIPR2_SDMMCSEL */ - -/** @brief Macro to get the SDMMC1 clock. - * @retval The clock source can be one of the following values: - @if STM32L486xx - * @arg @ref RCC_SDMMC1CLKSOURCE_NONE No clock selected as SDMMC1 clock for devices without HSI48 - * @arg @ref RCC_SDMMC1CLKSOURCE_MSI MSI selected as SDMMC1 clock - * @arg @ref RCC_SDMMC1CLKSOURCE_PLLSAI1 PLLSAI1 "Q" clock (PLL48M2CLK) selected as SDMMC1 clock - @endif - @if STM32L443xx - * @arg @ref RCC_SDMMC1CLKSOURCE_HSI48 HSI48 selected as SDMMC1 clock for devices with HSI48 - * @arg @ref RCC_SDMMC1CLKSOURCE_MSI MSI selected as SDMMC1 clock - * @arg @ref RCC_SDMMC1CLKSOURCE_PLLSAI1 PLLSAI1 "Q" clock (PLL48M2CLK) selected as SDMMC1 clock - @endif - @if STM32L4S9xx - * @arg @ref RCC_SDMMC1CLKSOURCE_HSI48 HSI48 selected as SDMMC1 clock for devices with HSI48 - * @arg @ref RCC_SDMMC1CLKSOURCE_MSI MSI selected as SDMMC1 clock - * @arg @ref RCC_SDMMC1CLKSOURCE_PLLSAI1 PLLSAI1 "Q" clock (PLL48M2CLK) selected as SDMMC1 clock - * @arg @ref RCC_SDMMC1CLKSOURCE_PLLP PLL "P" clock (PLLSAI3CLK) selected as SDMMC1 kernel clock - @endif - * @arg @ref RCC_SDMMC1CLKSOURCE_PLL PLL "Q" clock (PLL48M1CLK) selected as SDMMC1 clock - */ -#if defined(RCC_CCIPR2_SDMMCSEL) -#define __HAL_RCC_GET_SDMMC1_SOURCE() \ - ((READ_BIT(RCC->CCIPR2, RCC_CCIPR2_SDMMCSEL) != 0U) ? RCC_SDMMC1CLKSOURCE_PLLP : (READ_BIT(RCC->CCIPR, RCC_CCIPR_CLK48SEL))) -#else -#define __HAL_RCC_GET_SDMMC1_SOURCE() \ - (READ_BIT(RCC->CCIPR, RCC_CCIPR_CLK48SEL)) -#endif /* RCC_CCIPR2_SDMMCSEL */ - -#endif /* SDMMC1 */ - -/** @brief Macro to configure the RNG clock. - * - * @note USB, RNG and SDMMC1 peripherals share the same 48MHz clock source. - * - * @param __RNG_CLKSOURCE__ specifies the RNG clock source. - * This parameter can be one of the following values: - @if STM32L486xx - * @arg @ref RCC_RNGCLKSOURCE_NONE No clock selected as RNG clock for devices without HSI48 - @endif - @if STM32L443xx - * @arg @ref RCC_RNGCLKSOURCE_HSI48 HSI48 selected as RNG clock clock for devices with HSI48 - @endif - * @arg @ref RCC_RNGCLKSOURCE_MSI MSI selected as RNG clock - * @arg @ref RCC_RNGCLKSOURCE_PLLSAI1 PLLSAI1 Clock selected as RNG clock - * @arg @ref RCC_RNGCLKSOURCE_PLL PLL Clock selected as RNG clock - * @retval None - */ -#define __HAL_RCC_RNG_CONFIG(__RNG_CLKSOURCE__) \ - MODIFY_REG(RCC->CCIPR, RCC_CCIPR_CLK48SEL, (__RNG_CLKSOURCE__)) - -/** @brief Macro to get the RNG clock. - * @retval The clock source can be one of the following values: - @if STM32L486xx - * @arg @ref RCC_RNGCLKSOURCE_NONE No clock selected as RNG clock for devices without HSI48 - @endif - @if STM32L443xx - * @arg @ref RCC_RNGCLKSOURCE_HSI48 HSI48 selected as RNG clock clock for devices with HSI48 - @endif - * @arg @ref RCC_RNGCLKSOURCE_MSI MSI selected as RNG clock - * @arg @ref RCC_RNGCLKSOURCE_PLLSAI1 PLLSAI1 "Q" clock (PLL48M2CLK) selected as RNG clock - * @arg @ref RCC_RNGCLKSOURCE_PLL PLL "Q" clock (PLL48M1CLK) selected as RNG clock - */ -#define __HAL_RCC_GET_RNG_SOURCE() (READ_BIT(RCC->CCIPR, RCC_CCIPR_CLK48SEL)) - -#if defined(USB_OTG_FS) || defined(USB) - -/** @brief Macro to configure the USB clock (USBCLK). - * - * @note USB, RNG and SDMMC1 peripherals share the same 48MHz clock source. - * - * @param __USB_CLKSOURCE__ specifies the USB clock source. - * This parameter can be one of the following values: - @if STM32L486xx - * @arg @ref RCC_USBCLKSOURCE_NONE No clock selected as 48MHz clock for devices without HSI48 - @endif - @if STM32L443xx - * @arg @ref RCC_USBCLKSOURCE_HSI48 HSI48 selected as 48MHz clock for devices with HSI48 - @endif - * @arg @ref RCC_USBCLKSOURCE_MSI MSI selected as USB clock - * @arg @ref RCC_USBCLKSOURCE_PLLSAI1 PLLSAI1 "Q" clock (PLL48M2CLK) selected as USB clock - * @arg @ref RCC_USBCLKSOURCE_PLL PLL "Q" clock (PLL48M1CLK) selected as USB clock - * @retval None - */ -#define __HAL_RCC_USB_CONFIG(__USB_CLKSOURCE__) \ - MODIFY_REG(RCC->CCIPR, RCC_CCIPR_CLK48SEL, (__USB_CLKSOURCE__)) - -/** @brief Macro to get the USB clock source. - * @retval The clock source can be one of the following values: - @if STM32L486xx - * @arg @ref RCC_USBCLKSOURCE_NONE No clock selected as 48MHz clock for devices without HSI48 - @endif - @if STM32L443xx - * @arg @ref RCC_USBCLKSOURCE_HSI48 HSI48 selected as 48MHz clock for devices with HSI48 - @endif - * @arg @ref RCC_USBCLKSOURCE_MSI MSI selected as USB clock - * @arg @ref RCC_USBCLKSOURCE_PLLSAI1 PLLSAI1 "Q" clock (PLL48M2CLK) selected as USB clock - * @arg @ref RCC_USBCLKSOURCE_PLL PLL "Q" clock (PLL48M1CLK) selected as USB clock - */ -#define __HAL_RCC_GET_USB_SOURCE() (READ_BIT(RCC->CCIPR, RCC_CCIPR_CLK48SEL)) - -#endif /* USB_OTG_FS || USB */ - -#if defined(RCC_CCIPR_ADCSEL) - -/** @brief Macro to configure the ADC interface clock. - * @param __ADC_CLKSOURCE__ specifies the ADC digital interface clock source. - * This parameter can be one of the following values: - * @arg @ref RCC_ADCCLKSOURCE_NONE No clock selected as ADC clock - * @arg @ref RCC_ADCCLKSOURCE_PLLSAI1 PLLSAI1 Clock selected as ADC clock - @if STM32L486xx - * @arg @ref RCC_ADCCLKSOURCE_PLLSAI2 PLLSAI2 Clock selected as ADC clock for STM32L47x/STM32L48x/STM32L49x/STM32L4Ax devices - @endif - * @arg @ref RCC_ADCCLKSOURCE_SYSCLK System Clock selected as ADC clock - * @retval None - */ -#define __HAL_RCC_ADC_CONFIG(__ADC_CLKSOURCE__) \ - MODIFY_REG(RCC->CCIPR, RCC_CCIPR_ADCSEL, (__ADC_CLKSOURCE__)) - -/** @brief Macro to get the ADC clock source. - * @retval The clock source can be one of the following values: - * @arg @ref RCC_ADCCLKSOURCE_NONE No clock selected as ADC clock - * @arg @ref RCC_ADCCLKSOURCE_PLLSAI1 PLLSAI1 Clock selected as ADC clock - @if STM32L486xx - * @arg @ref RCC_ADCCLKSOURCE_PLLSAI2 PLLSAI2 Clock selected as ADC clock for STM32L47x/STM32L48x/STM32L49x/STM32L4Ax devices - @endif - * @arg @ref RCC_ADCCLKSOURCE_SYSCLK System Clock selected as ADC clock - */ -#define __HAL_RCC_GET_ADC_SOURCE() (READ_BIT(RCC->CCIPR, RCC_CCIPR_ADCSEL)) -#else - -/** @brief Macro to get the ADC clock source. - * @retval The clock source can be one of the following values: - * @arg @ref RCC_ADCCLKSOURCE_NONE No clock selected as ADC clock - * @arg @ref RCC_ADCCLKSOURCE_SYSCLK System Clock selected as ADC clock - */ -#define __HAL_RCC_GET_ADC_SOURCE() ((__HAL_RCC_ADC_IS_CLK_ENABLED() != 0U) ? RCC_ADCCLKSOURCE_SYSCLK : RCC_ADCCLKSOURCE_NONE) - -#endif /* RCC_CCIPR_ADCSEL */ - -#if defined(SWPMI1) - -/** @brief Macro to configure the SWPMI1 clock. - * @param __SWPMI1_CLKSOURCE__ specifies the SWPMI1 clock source. - * This parameter can be one of the following values: - * @arg @ref RCC_SWPMI1CLKSOURCE_PCLK1 PCLK1 Clock selected as SWPMI1 clock - * @arg @ref RCC_SWPMI1CLKSOURCE_HSI HSI Clock selected as SWPMI1 clock - * @retval None - */ -#define __HAL_RCC_SWPMI1_CONFIG(__SWPMI1_CLKSOURCE__) \ - MODIFY_REG(RCC->CCIPR, RCC_CCIPR_SWPMI1SEL, (__SWPMI1_CLKSOURCE__)) - -/** @brief Macro to get the SWPMI1 clock source. - * @retval The clock source can be one of the following values: - * @arg @ref RCC_SWPMI1CLKSOURCE_PCLK1 PCLK1 Clock selected as SWPMI1 clock - * @arg @ref RCC_SWPMI1CLKSOURCE_HSI HSI Clock selected as SWPMI1 clock - */ -#define __HAL_RCC_GET_SWPMI1_SOURCE() (READ_BIT(RCC->CCIPR, RCC_CCIPR_SWPMI1SEL)) - -#endif /* SWPMI1 */ - -#if defined(DFSDM1_Filter0) -/** @brief Macro to configure the DFSDM1 clock. - * @param __DFSDM1_CLKSOURCE__ specifies the DFSDM1 clock source. - * This parameter can be one of the following values: - * @arg @ref RCC_DFSDM1CLKSOURCE_PCLK2 PCLK2 Clock selected as DFSDM1 clock - * @arg @ref RCC_DFSDM1CLKSOURCE_SYSCLK System Clock selected as DFSDM1 clock - * @retval None - */ -#if defined(STM32L4P5xx) || defined(STM32L4Q5xx) || defined(STM32L4R5xx) || defined(STM32L4R7xx) || defined(STM32L4R9xx) || defined(STM32L4S5xx) || defined(STM32L4S7xx) || defined(STM32L4S9xx) -#define __HAL_RCC_DFSDM1_CONFIG(__DFSDM1_CLKSOURCE__) \ - MODIFY_REG(RCC->CCIPR2, RCC_CCIPR2_DFSDM1SEL, (__DFSDM1_CLKSOURCE__)) -#else -#define __HAL_RCC_DFSDM1_CONFIG(__DFSDM1_CLKSOURCE__) \ - MODIFY_REG(RCC->CCIPR, RCC_CCIPR_DFSDM1SEL, (__DFSDM1_CLKSOURCE__)) -#endif /* STM32L4P5xx || STM32L4Q5xx || STM32L4R5xx || STM32L4R7xx || STM32L4R9xx || STM32L4S5xx || STM32L4S7xx || STM32L4S9xx */ - -/** @brief Macro to get the DFSDM1 clock source. - * @retval The clock source can be one of the following values: - * @arg @ref RCC_DFSDM1CLKSOURCE_PCLK2 PCLK2 Clock selected as DFSDM1 clock - * @arg @ref RCC_DFSDM1CLKSOURCE_SYSCLK System Clock selected as DFSDM1 clock - */ -#if defined(STM32L4P5xx) || defined(STM32L4Q5xx) || defined(STM32L4R5xx) || defined(STM32L4R7xx) || defined(STM32L4R9xx) || defined(STM32L4S5xx) || defined(STM32L4S7xx) || defined(STM32L4S9xx) -#define __HAL_RCC_GET_DFSDM1_SOURCE() (READ_BIT(RCC->CCIPR2, RCC_CCIPR2_DFSDM1SEL)) -#else -#define __HAL_RCC_GET_DFSDM1_SOURCE() (READ_BIT(RCC->CCIPR, RCC_CCIPR_DFSDM1SEL)) -#endif /* STM32L4P5xx || STM32L4Q5xx || STM32L4R5xx || STM32L4R7xx || STM32L4R9xx || STM32L4S5xx || STM32L4S7xx || STM32L4S9xx */ - -#if defined(STM32L4P5xx) || defined(STM32L4Q5xx) || defined(STM32L4R5xx) || defined(STM32L4R7xx) || defined(STM32L4R9xx) || defined(STM32L4S5xx) || defined(STM32L4S7xx) || defined(STM32L4S9xx) - -/** @brief Macro to configure the DFSDM1 audio clock. - * @param __DFSDM1AUDIO_CLKSOURCE__ specifies the DFSDM1 audio clock source. - * This parameter can be one of the following values: - * @arg @ref RCC_DFSDM1AUDIOCLKSOURCE_SAI1 SAI1 clock selected as DFSDM1 audio clock - * @arg @ref RCC_DFSDM1AUDIOCLKSOURCE_HSI HSI clock selected as DFSDM1 audio clock - * @arg @ref RCC_DFSDM1AUDIOCLKSOURCE_MSI MSI clock selected as DFSDM1 audio clock - * @retval None - */ -#define __HAL_RCC_DFSDM1AUDIO_CONFIG(__DFSDM1AUDIO_CLKSOURCE__) \ - MODIFY_REG(RCC->CCIPR2, RCC_CCIPR2_ADFSDM1SEL, (__DFSDM1AUDIO_CLKSOURCE__)) - -/** @brief Macro to get the DFSDM1 audio clock source. - * @retval The clock source can be one of the following values: - * @arg @ref RCC_DFSDM1AUDIOCLKSOURCE_SAI1 SAI1 clock selected as DFSDM1 audio clock - * @arg @ref RCC_DFSDM1AUDIOCLKSOURCE_HSI HSI clock selected as DFSDM1 audio clock - * @arg @ref RCC_DFSDM1AUDIOCLKSOURCE_MSI MSI clock selected as DFSDM1 audio clock - */ -#define __HAL_RCC_GET_DFSDM1AUDIO_SOURCE() (READ_BIT(RCC->CCIPR2, RCC_CCIPR2_ADFSDM1SEL)) - -#endif /* STM32L4P5xx || STM32L4Q5xx || STM32L4R5xx || STM32L4R7xx || STM32L4R9xx || STM32L4S5xx || STM32L4S7xx || STM32L4S9xx */ - -#endif /* DFSDM1_Filter0 */ - -#if defined(LTDC) - -/** @brief Macro to configure the LTDC clock. - * @param __LTDC_CLKSOURCE__ specifies the LTDC clock source. - * This parameter can be one of the following values: - * @arg @ref RCC_LTDCCLKSOURCE_PLLSAI2_DIV2 PLLSAI2 divider R divided by 2 clock selected as LTDC clock - * @arg @ref RCC_LTDCCLKSOURCE_PLLSAI2_DIV4 PLLSAI2 divider R divided by 4 clock selected as LTDC clock - * @arg @ref RCC_LTDCCLKSOURCE_PLLSAI2_DIV8 PLLSAI2 divider R divided by 8 clock selected as LTDC clock - * @arg @ref RCC_LTDCCLKSOURCE_PLLSAI2_DIV16 PLLSAI2 divider R divided by 16 clock selected as LTDC clock - * @retval None - */ -#define __HAL_RCC_LTDC_CONFIG(__LTDC_CLKSOURCE__) \ - MODIFY_REG(RCC->CCIPR2, RCC_CCIPR2_PLLSAI2DIVR, (__LTDC_CLKSOURCE__)) - -/** @brief Macro to get the LTDC clock source. - * @retval The clock source can be one of the following values: - * @arg @ref RCC_LTDCCLKSOURCE_PLLSAI2_DIV2 PLLSAI2 divider R divided by 2 clock selected as LTDC clock - * @arg @ref RCC_LTDCCLKSOURCE_PLLSAI2_DIV4 PLLSAI2 divider R divided by 4 clock selected as LTDC clock - * @arg @ref RCC_LTDCCLKSOURCE_PLLSAI2_DIV8 PLLSAI2 divider R divided by 8 clock selected as LTDC clock - * @arg @ref RCC_LTDCCLKSOURCE_PLLSAI2_DIV16 PLLSAI2 divider R divided by 16 clock selected as LTDC clock - */ -#define __HAL_RCC_GET_LTDC_SOURCE() (READ_BIT(RCC->CCIPR2, RCC_CCIPR2_PLLSAI2DIVR)) - -#endif /* LTDC */ - -#if defined(DSI ) - -/** @brief Macro to configure the DSI clock. - * @param __DSI_CLKSOURCE__ specifies the DSI clock source. - * This parameter can be one of the following values: - * @arg @ref RCC_DSICLKSOURCE_DSIPHY DSI-PHY clock selected as DSI clock - * @arg @ref RCC_DSICLKSOURCE_PLLSAI2 PLLSAI2 R divider clock selected as DSI clock - * @retval None - */ -#define __HAL_RCC_DSI_CONFIG(__DSI_CLKSOURCE__) \ - MODIFY_REG(RCC->CCIPR2, RCC_CCIPR2_DSISEL, (__DSI_CLKSOURCE__)) - -/** @brief Macro to get the DSI clock source. - * @retval The clock source can be one of the following values: - * @arg @ref RCC_DSICLKSOURCE_DSIPHY DSI-PHY clock selected as DSI clock - * @arg @ref RCC_DSICLKSOURCE_PLLSAI2 PLLSAI2 R divider clock selected as DSI clock - */ -#define __HAL_RCC_GET_DSI_SOURCE() (READ_BIT(RCC->CCIPR2, RCC_CCIPR2_DSISEL)) - -#endif /* DSI */ - -#if defined(OCTOSPI1) || defined(OCTOSPI2) - -/** @brief Macro to configure the OctoSPI clock. - * @param __OSPI_CLKSOURCE__ specifies the OctoSPI clock source. - * This parameter can be one of the following values: - * @arg @ref RCC_OSPICLKSOURCE_SYSCLK System Clock selected as OctoSPI clock - * @arg @ref RCC_OSPICLKSOURCE_MSI MSI clock selected as OctoSPI clock - * @arg @ref RCC_OSPICLKSOURCE_PLL PLL Q divider clock selected as OctoSPI clock - * @retval None - */ -#define __HAL_RCC_OSPI_CONFIG(__OSPI_CLKSOURCE__) \ - MODIFY_REG(RCC->CCIPR2, RCC_CCIPR2_OSPISEL, (__OSPI_CLKSOURCE__)) - -/** @brief Macro to get the OctoSPI clock source. - * @retval The clock source can be one of the following values: - * @arg @ref RCC_OSPICLKSOURCE_SYSCLK System Clock selected as OctoSPI clock - * @arg @ref RCC_OSPICLKSOURCE_MSI MSI clock selected as OctoSPI clock - * @arg @ref RCC_OSPICLKSOURCE_PLL PLL Q divider clock selected as OctoSPI clock - */ -#define __HAL_RCC_GET_OSPI_SOURCE() (READ_BIT(RCC->CCIPR2, RCC_CCIPR2_OSPISEL)) - -#endif /* OCTOSPI1 || OCTOSPI2 */ - -/** @defgroup RCCEx_Flags_Interrupts_Management Flags Interrupts Management - * @brief macros to manage the specified RCC Flags and interrupts. - * @{ - */ -#if defined(RCC_PLLSAI1_SUPPORT) - -/** @brief Enable PLLSAI1RDY interrupt. - * @retval None - */ -#define __HAL_RCC_PLLSAI1_ENABLE_IT() SET_BIT(RCC->CIER, RCC_CIER_PLLSAI1RDYIE) - -/** @brief Disable PLLSAI1RDY interrupt. - * @retval None - */ -#define __HAL_RCC_PLLSAI1_DISABLE_IT() CLEAR_BIT(RCC->CIER, RCC_CIER_PLLSAI1RDYIE) - -/** @brief Clear the PLLSAI1RDY interrupt pending bit. - * @retval None - */ -#define __HAL_RCC_PLLSAI1_CLEAR_IT() WRITE_REG(RCC->CICR, RCC_CICR_PLLSAI1RDYC) - -/** @brief Check whether PLLSAI1RDY interrupt has occurred or not. - * @retval TRUE or FALSE. - */ -#define __HAL_RCC_PLLSAI1_GET_IT_SOURCE() (READ_BIT(RCC->CIFR, RCC_CIFR_PLLSAI1RDYF) == RCC_CIFR_PLLSAI1RDYF) - -/** @brief Check whether the PLLSAI1RDY flag is set or not. - * @retval TRUE or FALSE. - */ -#define __HAL_RCC_PLLSAI1_GET_FLAG() (READ_BIT(RCC->CR, RCC_CR_PLLSAI1RDY) == (RCC_CR_PLLSAI1RDY)) - -#endif /* RCC_PLLSAI1_SUPPORT */ - -#if defined(RCC_PLLSAI2_SUPPORT) - -/** @brief Enable PLLSAI2RDY interrupt. - * @retval None - */ -#define __HAL_RCC_PLLSAI2_ENABLE_IT() SET_BIT(RCC->CIER, RCC_CIER_PLLSAI2RDYIE) - -/** @brief Disable PLLSAI2RDY interrupt. - * @retval None - */ -#define __HAL_RCC_PLLSAI2_DISABLE_IT() CLEAR_BIT(RCC->CIER, RCC_CIER_PLLSAI2RDYIE) - -/** @brief Clear the PLLSAI2RDY interrupt pending bit. - * @retval None - */ -#define __HAL_RCC_PLLSAI2_CLEAR_IT() WRITE_REG(RCC->CICR, RCC_CICR_PLLSAI2RDYC) - -/** @brief Check whether the PLLSAI2RDY interrupt has occurred or not. - * @retval TRUE or FALSE. - */ -#define __HAL_RCC_PLLSAI2_GET_IT_SOURCE() (READ_BIT(RCC->CIFR, RCC_CIFR_PLLSAI2RDYF) == RCC_CIFR_PLLSAI2RDYF) - -/** @brief Check whether the PLLSAI2RDY flag is set or not. - * @retval TRUE or FALSE. - */ -#define __HAL_RCC_PLLSAI2_GET_FLAG() (READ_BIT(RCC->CR, RCC_CR_PLLSAI2RDY) == (RCC_CR_PLLSAI2RDY)) - -#endif /* RCC_PLLSAI2_SUPPORT */ - - -/** - * @brief Enable the RCC LSE CSS Extended Interrupt Line. - * @retval None - */ -#define __HAL_RCC_LSECSS_EXTI_ENABLE_IT() SET_BIT(EXTI->IMR1, RCC_EXTI_LINE_LSECSS) - -/** - * @brief Disable the RCC LSE CSS Extended Interrupt Line. - * @retval None - */ -#define __HAL_RCC_LSECSS_EXTI_DISABLE_IT() CLEAR_BIT(EXTI->IMR1, RCC_EXTI_LINE_LSECSS) - -/** - * @brief Enable the RCC LSE CSS Event Line. - * @retval None. - */ -#define __HAL_RCC_LSECSS_EXTI_ENABLE_EVENT() SET_BIT(EXTI->EMR1, RCC_EXTI_LINE_LSECSS) - -/** - * @brief Disable the RCC LSE CSS Event Line. - * @retval None. - */ -#define __HAL_RCC_LSECSS_EXTI_DISABLE_EVENT() CLEAR_BIT(EXTI->EMR1, RCC_EXTI_LINE_LSECSS) - - -/** - * @brief Enable the RCC LSE CSS Extended Interrupt Falling Trigger. - * @retval None. - */ -#define __HAL_RCC_LSECSS_EXTI_ENABLE_FALLING_EDGE() SET_BIT(EXTI->FTSR1, RCC_EXTI_LINE_LSECSS) - - -/** - * @brief Disable the RCC LSE CSS Extended Interrupt Falling Trigger. - * @retval None. - */ -#define __HAL_RCC_LSECSS_EXTI_DISABLE_FALLING_EDGE() CLEAR_BIT(EXTI->FTSR1, RCC_EXTI_LINE_LSECSS) - - -/** - * @brief Enable the RCC LSE CSS Extended Interrupt Rising Trigger. - * @retval None. - */ -#define __HAL_RCC_LSECSS_EXTI_ENABLE_RISING_EDGE() SET_BIT(EXTI->RTSR1, RCC_EXTI_LINE_LSECSS) - -/** - * @brief Disable the RCC LSE CSS Extended Interrupt Rising Trigger. - * @retval None. - */ -#define __HAL_RCC_LSECSS_EXTI_DISABLE_RISING_EDGE() CLEAR_BIT(EXTI->RTSR1, RCC_EXTI_LINE_LSECSS) - -/** - * @brief Enable the RCC LSE CSS Extended Interrupt Rising & Falling Trigger. - * @retval None. - */ -#define __HAL_RCC_LSECSS_EXTI_ENABLE_RISING_FALLING_EDGE() \ - do { \ - __HAL_RCC_LSECSS_EXTI_ENABLE_RISING_EDGE(); \ - __HAL_RCC_LSECSS_EXTI_ENABLE_FALLING_EDGE(); \ - } while(0) - -/** - * @brief Disable the RCC LSE CSS Extended Interrupt Rising & Falling Trigger. - * @retval None. - */ -#define __HAL_RCC_LSECSS_EXTI_DISABLE_RISING_FALLING_EDGE() \ - do { \ - __HAL_RCC_LSECSS_EXTI_DISABLE_RISING_EDGE(); \ - __HAL_RCC_LSECSS_EXTI_DISABLE_FALLING_EDGE(); \ - } while(0) - -/** - * @brief Check whether the specified RCC LSE CSS EXTI interrupt flag is set or not. - * @retval EXTI RCC LSE CSS Line Status. - */ -#define __HAL_RCC_LSECSS_EXTI_GET_FLAG() (READ_BIT(EXTI->PR1, RCC_EXTI_LINE_LSECSS) == RCC_EXTI_LINE_LSECSS) - -/** - * @brief Clear the RCC LSE CSS EXTI flag. - * @retval None. - */ -#define __HAL_RCC_LSECSS_EXTI_CLEAR_FLAG() WRITE_REG(EXTI->PR1, RCC_EXTI_LINE_LSECSS) - -/** - * @brief Generate a Software interrupt on the RCC LSE CSS EXTI line. - * @retval None. - */ -#define __HAL_RCC_LSECSS_EXTI_GENERATE_SWIT() SET_BIT(EXTI->SWIER1, RCC_EXTI_LINE_LSECSS) - - -#if defined(CRS) - -/** - * @brief Enable the specified CRS interrupts. - * @param __INTERRUPT__ specifies the CRS interrupt sources to be enabled. - * This parameter can be any combination of the following values: - * @arg @ref RCC_CRS_IT_SYNCOK SYNC event OK interrupt - * @arg @ref RCC_CRS_IT_SYNCWARN SYNC warning interrupt - * @arg @ref RCC_CRS_IT_ERR Synchronization or trimming error interrupt - * @arg @ref RCC_CRS_IT_ESYNC Expected SYNC interrupt - * @retval None - */ -#define __HAL_RCC_CRS_ENABLE_IT(__INTERRUPT__) SET_BIT(CRS->CR, (__INTERRUPT__)) - -/** - * @brief Disable the specified CRS interrupts. - * @param __INTERRUPT__ specifies the CRS interrupt sources to be disabled. - * This parameter can be any combination of the following values: - * @arg @ref RCC_CRS_IT_SYNCOK SYNC event OK interrupt - * @arg @ref RCC_CRS_IT_SYNCWARN SYNC warning interrupt - * @arg @ref RCC_CRS_IT_ERR Synchronization or trimming error interrupt - * @arg @ref RCC_CRS_IT_ESYNC Expected SYNC interrupt - * @retval None - */ -#define __HAL_RCC_CRS_DISABLE_IT(__INTERRUPT__) CLEAR_BIT(CRS->CR, (__INTERRUPT__)) - -/** @brief Check whether the CRS interrupt has occurred or not. - * @param __INTERRUPT__ specifies the CRS interrupt source to check. - * This parameter can be one of the following values: - * @arg @ref RCC_CRS_IT_SYNCOK SYNC event OK interrupt - * @arg @ref RCC_CRS_IT_SYNCWARN SYNC warning interrupt - * @arg @ref RCC_CRS_IT_ERR Synchronization or trimming error interrupt - * @arg @ref RCC_CRS_IT_ESYNC Expected SYNC interrupt - * @retval The new state of __INTERRUPT__ (SET or RESET). - */ -#define __HAL_RCC_CRS_GET_IT_SOURCE(__INTERRUPT__) ((READ_BIT(CRS->CR, (__INTERRUPT__)) != 0U) ? SET : RESET) - -/** @brief Clear the CRS interrupt pending bits - * @param __INTERRUPT__ specifies the interrupt pending bit to clear. - * This parameter can be any combination of the following values: - * @arg @ref RCC_CRS_IT_SYNCOK SYNC event OK interrupt - * @arg @ref RCC_CRS_IT_SYNCWARN SYNC warning interrupt - * @arg @ref RCC_CRS_IT_ERR Synchronization or trimming error interrupt - * @arg @ref RCC_CRS_IT_ESYNC Expected SYNC interrupt - * @arg @ref RCC_CRS_IT_TRIMOVF Trimming overflow or underflow interrupt - * @arg @ref RCC_CRS_IT_SYNCERR SYNC error interrupt - * @arg @ref RCC_CRS_IT_SYNCMISS SYNC missed interrupt - */ -/* CRS IT Error Mask */ -#define RCC_CRS_IT_ERROR_MASK (RCC_CRS_IT_TRIMOVF | RCC_CRS_IT_SYNCERR | RCC_CRS_IT_SYNCMISS) - -#define __HAL_RCC_CRS_CLEAR_IT(__INTERRUPT__) do { \ - if(((__INTERRUPT__) & RCC_CRS_IT_ERROR_MASK) != 0U) \ - { \ - WRITE_REG(CRS->ICR, CRS_ICR_ERRC | ((__INTERRUPT__) & ~RCC_CRS_IT_ERROR_MASK)); \ - } \ - else \ - { \ - WRITE_REG(CRS->ICR, (__INTERRUPT__)); \ - } \ - } while(0) - -/** - * @brief Check whether the specified CRS flag is set or not. - * @param __FLAG__ specifies the flag to check. - * This parameter can be one of the following values: - * @arg @ref RCC_CRS_FLAG_SYNCOK SYNC event OK - * @arg @ref RCC_CRS_FLAG_SYNCWARN SYNC warning - * @arg @ref RCC_CRS_FLAG_ERR Error - * @arg @ref RCC_CRS_FLAG_ESYNC Expected SYNC - * @arg @ref RCC_CRS_FLAG_TRIMOVF Trimming overflow or underflow - * @arg @ref RCC_CRS_FLAG_SYNCERR SYNC error - * @arg @ref RCC_CRS_FLAG_SYNCMISS SYNC missed - * @retval The new state of _FLAG_ (TRUE or FALSE). - */ -#define __HAL_RCC_CRS_GET_FLAG(__FLAG__) (READ_BIT(CRS->ISR, (__FLAG__)) == (__FLAG__)) - -/** - * @brief Clear the CRS specified FLAG. - * @param __FLAG__ specifies the flag to clear. - * This parameter can be one of the following values: - * @arg @ref RCC_CRS_FLAG_SYNCOK SYNC event OK - * @arg @ref RCC_CRS_FLAG_SYNCWARN SYNC warning - * @arg @ref RCC_CRS_FLAG_ERR Error - * @arg @ref RCC_CRS_FLAG_ESYNC Expected SYNC - * @arg @ref RCC_CRS_FLAG_TRIMOVF Trimming overflow or underflow - * @arg @ref RCC_CRS_FLAG_SYNCERR SYNC error - * @arg @ref RCC_CRS_FLAG_SYNCMISS SYNC missed - * @note RCC_CRS_FLAG_ERR clears RCC_CRS_FLAG_TRIMOVF, RCC_CRS_FLAG_SYNCERR, RCC_CRS_FLAG_SYNCMISS and consequently RCC_CRS_FLAG_ERR - * @retval None - */ - -/* CRS Flag Error Mask */ -#define RCC_CRS_FLAG_ERROR_MASK (RCC_CRS_FLAG_TRIMOVF | RCC_CRS_FLAG_SYNCERR | RCC_CRS_FLAG_SYNCMISS) - -#define __HAL_RCC_CRS_CLEAR_FLAG(__FLAG__) do { \ - if(((__FLAG__) & RCC_CRS_FLAG_ERROR_MASK) != 0U) \ - { \ - WRITE_REG(CRS->ICR, CRS_ICR_ERRC | ((__FLAG__) & ~RCC_CRS_FLAG_ERROR_MASK)); \ - } \ - else \ - { \ - WRITE_REG(CRS->ICR, (__FLAG__)); \ - } \ - } while(0) - -#endif /* CRS */ - -/** - * @} - */ - -#if defined(CRS) - -/** @defgroup RCCEx_CRS_Extended_Features RCCEx CRS Extended Features - * @{ - */ -/** - * @brief Enable the oscillator clock for frequency error counter. - * @note when the CEN bit is set the CRS_CFGR register becomes write-protected. - * @retval None - */ -#define __HAL_RCC_CRS_FREQ_ERROR_COUNTER_ENABLE() SET_BIT(CRS->CR, CRS_CR_CEN) - -/** - * @brief Disable the oscillator clock for frequency error counter. - * @retval None - */ -#define __HAL_RCC_CRS_FREQ_ERROR_COUNTER_DISABLE() CLEAR_BIT(CRS->CR, CRS_CR_CEN) - -/** - * @brief Enable the automatic hardware adjustment of TRIM bits. - * @note When the AUTOTRIMEN bit is set the CRS_CFGR register becomes write-protected. - * @retval None - */ -#define __HAL_RCC_CRS_AUTOMATIC_CALIB_ENABLE() SET_BIT(CRS->CR, CRS_CR_AUTOTRIMEN) - -/** - * @brief Enable or disable the automatic hardware adjustment of TRIM bits. - * @retval None - */ -#define __HAL_RCC_CRS_AUTOMATIC_CALIB_DISABLE() CLEAR_BIT(CRS->CR, CRS_CR_AUTOTRIMEN) - -/** - * @brief Macro to calculate reload value to be set in CRS register according to target and sync frequencies - * @note The RELOAD value should be selected according to the ratio between the target frequency and the frequency - * of the synchronization source after prescaling. It is then decreased by one in order to - * reach the expected synchronization on the zero value. The formula is the following: - * RELOAD = (fTARGET / fSYNC) -1 - * @param __FTARGET__ Target frequency (value in Hz) - * @param __FSYNC__ Synchronization signal frequency (value in Hz) - * @retval None - */ -#define __HAL_RCC_CRS_RELOADVALUE_CALCULATE(__FTARGET__, __FSYNC__) (((__FTARGET__) / (__FSYNC__)) - 1U) - -/** - * @} - */ - -#endif /* CRS */ - -#if defined(PSSI) - -/** @defgroup RCCEx_PSSI_Macros_Aliases RCCEx PSSI Macros Aliases - * @{ - */ - -#define __HAL_RCC_PSSI_CLK_ENABLE() __HAL_RCC_DCMI_CLK_ENABLE() - -#define __HAL_RCC_PSSI_CLK_DISABLE() __HAL_RCC_DCMI_CLK_DISABLE() - -#define __HAL_RCC_PSSI_IS_CLK_ENABLED() __HAL_RCC_DCMI_IS_CLK_ENABLED() - -#define __HAL_RCC_PSSI_IS_CLK_DISABLED() __HAL_RCC_DCMI_IS_CLK_DISABLED() - -#define __HAL_RCC_PSSI_FORCE_RESET() __HAL_RCC_DCMI_FORCE_RESET() - -#define __HAL_RCC_PSSI_RELEASE_RESET() __HAL_RCC_DCMI_RELEASE_RESET() - -#define __HAL_RCC_PSSI_CLK_SLEEP_ENABLE() __HAL_RCC_DCMI_CLK_SLEEP_ENABLE() - -#define __HAL_RCC_PSSI_CLK_SLEEP_DISABLE() __HAL_RCC_DCMI_CLK_SLEEP_DISABLE() - -#define __HAL_RCC_PSSI_IS_CLK_SLEEP_ENABLED() __HAL_RCC_DCMI_IS_CLK_SLEEP_ENABLED() - -#define __HAL_RCC_PSSI_IS_CLK_SLEEP_DISABLED() __HAL_RCC_DCMI_IS_CLK_SLEEP_DISABLED() - -/** - * @} - */ - -#endif /* PSSI */ - -/** - * @} - */ - -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup RCCEx_Exported_Functions - * @{ - */ - -/** @addtogroup RCCEx_Exported_Functions_Group1 - * @{ - */ - -HAL_StatusTypeDef HAL_RCCEx_PeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit); -void HAL_RCCEx_GetPeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit); -uint32_t HAL_RCCEx_GetPeriphCLKFreq(uint32_t PeriphClk); - -/** - * @} - */ - -/** @addtogroup RCCEx_Exported_Functions_Group2 - * @{ - */ -#if defined(RCC_PLLSAI1_SUPPORT) - -HAL_StatusTypeDef HAL_RCCEx_EnablePLLSAI1(RCC_PLLSAI1InitTypeDef *PLLSAI1Init); -HAL_StatusTypeDef HAL_RCCEx_DisablePLLSAI1(void); - -#endif /* RCC_PLLSAI1_SUPPORT */ - -#if defined(RCC_PLLSAI2_SUPPORT) - -HAL_StatusTypeDef HAL_RCCEx_EnablePLLSAI2(RCC_PLLSAI2InitTypeDef *PLLSAI2Init); -HAL_StatusTypeDef HAL_RCCEx_DisablePLLSAI2(void); - -#endif /* RCC_PLLSAI2_SUPPORT */ - -void HAL_RCCEx_WakeUpStopCLKConfig(uint32_t WakeUpClk); -void HAL_RCCEx_StandbyMSIRangeConfig(uint32_t MSIRange); -void HAL_RCCEx_EnableLSECSS(void); -void HAL_RCCEx_DisableLSECSS(void); -void HAL_RCCEx_EnableLSECSS_IT(void); -void HAL_RCCEx_LSECSS_IRQHandler(void); -void HAL_RCCEx_LSECSS_Callback(void); -void HAL_RCCEx_EnableLSCO(uint32_t LSCOSource); -void HAL_RCCEx_DisableLSCO(void); -void HAL_RCCEx_EnableMSIPLLMode(void); -void HAL_RCCEx_DisableMSIPLLMode(void); -#if defined (OCTOSPI1) && defined (OCTOSPI2) -void HAL_RCCEx_OCTOSPIDelayConfig(uint32_t Delay1, uint32_t Delay2); -#endif /* OCTOSPI1 && OCTOSPI2 */ - -/** - * @} - */ - -#if defined(CRS) - -/** @addtogroup RCCEx_Exported_Functions_Group3 - * @{ - */ - -void HAL_RCCEx_CRSConfig(RCC_CRSInitTypeDef *pInit); -void HAL_RCCEx_CRSSoftwareSynchronizationGenerate(void); -void HAL_RCCEx_CRSGetSynchronizationInfo(RCC_CRSSynchroInfoTypeDef *pSynchroInfo); -uint32_t HAL_RCCEx_CRSWaitSynchronization(uint32_t Timeout); -void HAL_RCCEx_CRS_IRQHandler(void); -void HAL_RCCEx_CRS_SyncOkCallback(void); -void HAL_RCCEx_CRS_SyncWarnCallback(void); -void HAL_RCCEx_CRS_ExpectedSyncCallback(void); -void HAL_RCCEx_CRS_ErrorCallback(uint32_t Error); - -/** - * @} - */ - -#endif /* CRS */ - -/** - * @} - */ - -/* Private constants ---------------------------------------------------------*/ -/** @addtogroup RCCEx_Private_Constants - * @{ - */ -/* Define used for IS_RCC_* macros below */ -#if defined(STM32L412xx) || defined(STM32L422xx) -#define RCC_PERIPHCLOCK_ALL (RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_USART2 | RCC_PERIPHCLK_USART3 | \ - RCC_PERIPHCLK_LPUART1 | \ - RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_I2C2 | RCC_PERIPHCLK_I2C3 | \ - RCC_PERIPHCLK_LPTIM1 | RCC_PERIPHCLK_LPTIM2 | \ - RCC_PERIPHCLK_USB | RCC_PERIPHCLK_ADC | RCC_PERIPHCLK_RTC | \ - RCC_PERIPHCLK_RNG) -#elif defined(STM32L431xx) -#define RCC_PERIPHCLOCK_ALL (RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_USART2 | RCC_PERIPHCLK_USART3 | \ - RCC_PERIPHCLK_LPUART1 | \ - RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_I2C2 | RCC_PERIPHCLK_I2C3 | \ - RCC_PERIPHCLK_LPTIM1 | RCC_PERIPHCLK_LPTIM2 | \ - RCC_PERIPHCLK_SAI1 | \ - RCC_PERIPHCLK_ADC | RCC_PERIPHCLK_SWPMI1 | \ - RCC_PERIPHCLK_RTC | RCC_PERIPHCLK_RNG | RCC_PERIPHCLK_SDMMC1) -#elif defined(STM32L432xx) || defined(STM32L442xx) -#define RCC_PERIPHCLOCK_ALL (RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_USART2 | \ - RCC_PERIPHCLK_LPUART1 | \ - RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_I2C3 | \ - RCC_PERIPHCLK_LPTIM1 | RCC_PERIPHCLK_LPTIM2 | \ - RCC_PERIPHCLK_SAI1 | \ - RCC_PERIPHCLK_USB | RCC_PERIPHCLK_ADC | \ - RCC_PERIPHCLK_SWPMI1 | RCC_PERIPHCLK_RTC | RCC_PERIPHCLK_RNG) -#elif defined(STM32L433xx) || defined(STM32L443xx) -#define RCC_PERIPHCLOCK_ALL (RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_USART2 | RCC_PERIPHCLK_USART3 |\ - RCC_PERIPHCLK_LPUART1 | \ - RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_I2C2 | RCC_PERIPHCLK_I2C3 | \ - RCC_PERIPHCLK_LPTIM1 | RCC_PERIPHCLK_LPTIM2 | \ - RCC_PERIPHCLK_SAI1 | \ - RCC_PERIPHCLK_USB | RCC_PERIPHCLK_ADC | RCC_PERIPHCLK_SWPMI1 | \ - RCC_PERIPHCLK_RTC | RCC_PERIPHCLK_RNG | RCC_PERIPHCLK_SDMMC1) -#elif defined(STM32L451xx) -#define RCC_PERIPHCLOCK_ALL (RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_USART2 | RCC_PERIPHCLK_USART3 |\ - RCC_PERIPHCLK_UART4 | \ - RCC_PERIPHCLK_LPUART1 | \ - RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_I2C2 | RCC_PERIPHCLK_I2C3 | \ - RCC_PERIPHCLK_I2C4 | \ - RCC_PERIPHCLK_LPTIM1 | RCC_PERIPHCLK_LPTIM2 | \ - RCC_PERIPHCLK_SAI1 | \ - RCC_PERIPHCLK_ADC | RCC_PERIPHCLK_DFSDM1 | \ - RCC_PERIPHCLK_RTC | RCC_PERIPHCLK_RNG | RCC_PERIPHCLK_SDMMC1) -#elif defined(STM32L452xx) || defined(STM32L462xx) -#define RCC_PERIPHCLOCK_ALL (RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_USART2 | RCC_PERIPHCLK_USART3 |\ - RCC_PERIPHCLK_UART4 | \ - RCC_PERIPHCLK_LPUART1 | \ - RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_I2C2 | RCC_PERIPHCLK_I2C3 | \ - RCC_PERIPHCLK_I2C4 | \ - RCC_PERIPHCLK_LPTIM1 | RCC_PERIPHCLK_LPTIM2 | \ - RCC_PERIPHCLK_SAI1 | \ - RCC_PERIPHCLK_USB | RCC_PERIPHCLK_ADC | RCC_PERIPHCLK_DFSDM1 | \ - RCC_PERIPHCLK_RTC | RCC_PERIPHCLK_RNG | RCC_PERIPHCLK_SDMMC1) -#elif defined(STM32L471xx) -#define RCC_PERIPHCLOCK_ALL (RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_USART2 | RCC_PERIPHCLK_USART3 | \ - RCC_PERIPHCLK_UART4 | RCC_PERIPHCLK_UART5 | \ - RCC_PERIPHCLK_LPUART1 | \ - RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_I2C2 | RCC_PERIPHCLK_I2C3 | \ - RCC_PERIPHCLK_LPTIM1 | RCC_PERIPHCLK_LPTIM2 | \ - RCC_PERIPHCLK_SAI1 | RCC_PERIPHCLK_SAI2 | \ - RCC_PERIPHCLK_ADC | RCC_PERIPHCLK_SWPMI1 | RCC_PERIPHCLK_DFSDM1 | \ - RCC_PERIPHCLK_RTC | RCC_PERIPHCLK_RNG | RCC_PERIPHCLK_SDMMC1) -#elif defined(STM32L496xx) || defined(STM32L4A6xx) -#define RCC_PERIPHCLOCK_ALL (RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_USART2 | RCC_PERIPHCLK_USART3 | \ - RCC_PERIPHCLK_UART4 | RCC_PERIPHCLK_UART5 | \ - RCC_PERIPHCLK_LPUART1 | \ - RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_I2C2 | RCC_PERIPHCLK_I2C3 | \ - RCC_PERIPHCLK_I2C4 | \ - RCC_PERIPHCLK_LPTIM1 | RCC_PERIPHCLK_LPTIM2 | \ - RCC_PERIPHCLK_SAI1 | RCC_PERIPHCLK_SAI2 | \ - RCC_PERIPHCLK_USB | \ - RCC_PERIPHCLK_ADC | RCC_PERIPHCLK_SWPMI1 | RCC_PERIPHCLK_DFSDM1 | \ - RCC_PERIPHCLK_RTC | RCC_PERIPHCLK_RNG | RCC_PERIPHCLK_SDMMC1) -#elif defined(STM32L4P5xx) || defined(STM32L4Q5xx) -#define RCC_PERIPHCLOCK_ALL (RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_USART2 | RCC_PERIPHCLK_USART3 | \ - RCC_PERIPHCLK_UART4 | RCC_PERIPHCLK_UART5 | \ - RCC_PERIPHCLK_LPUART1 | \ - RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_I2C2 | RCC_PERIPHCLK_I2C3 | \ - RCC_PERIPHCLK_I2C4 | \ - RCC_PERIPHCLK_LPTIM1 | RCC_PERIPHCLK_LPTIM2 | \ - RCC_PERIPHCLK_SAI1 | RCC_PERIPHCLK_SAI2 | \ - RCC_PERIPHCLK_USB | \ - RCC_PERIPHCLK_ADC | RCC_PERIPHCLK_DFSDM1 | RCC_PERIPHCLK_DFSDM1AUDIO | \ - RCC_PERIPHCLK_RTC | RCC_PERIPHCLK_RNG | RCC_PERIPHCLK_SDMMC1 | \ - RCC_PERIPHCLK_OSPI | RCC_PERIPHCLK_LTDC) -#elif defined(STM32L4R5xx) || defined(STM32L4S5xx) -#define RCC_PERIPHCLOCK_ALL (RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_USART2 | RCC_PERIPHCLK_USART3 | \ - RCC_PERIPHCLK_UART4 | RCC_PERIPHCLK_UART5 | \ - RCC_PERIPHCLK_LPUART1 | \ - RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_I2C2 | RCC_PERIPHCLK_I2C3 | \ - RCC_PERIPHCLK_I2C4 | \ - RCC_PERIPHCLK_LPTIM1 | RCC_PERIPHCLK_LPTIM2 | \ - RCC_PERIPHCLK_SAI1 | RCC_PERIPHCLK_SAI2 | \ - RCC_PERIPHCLK_USB | \ - RCC_PERIPHCLK_ADC | RCC_PERIPHCLK_DFSDM1 | RCC_PERIPHCLK_DFSDM1AUDIO | \ - RCC_PERIPHCLK_RTC | RCC_PERIPHCLK_RNG | RCC_PERIPHCLK_SDMMC1 | \ - RCC_PERIPHCLK_OSPI) -#elif defined(STM32L4R7xx) || defined(STM32L4S7xx) -#define RCC_PERIPHCLOCK_ALL (RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_USART2 | RCC_PERIPHCLK_USART3 | \ - RCC_PERIPHCLK_UART4 | RCC_PERIPHCLK_UART5 | \ - RCC_PERIPHCLK_LPUART1 | \ - RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_I2C2 | RCC_PERIPHCLK_I2C3 | \ - RCC_PERIPHCLK_I2C4 | \ - RCC_PERIPHCLK_LPTIM1 | RCC_PERIPHCLK_LPTIM2 | \ - RCC_PERIPHCLK_SAI1 | RCC_PERIPHCLK_SAI2 | \ - RCC_PERIPHCLK_USB | \ - RCC_PERIPHCLK_ADC | RCC_PERIPHCLK_DFSDM1 | RCC_PERIPHCLK_DFSDM1AUDIO | \ - RCC_PERIPHCLK_RTC | RCC_PERIPHCLK_RNG | RCC_PERIPHCLK_SDMMC1 | \ - RCC_PERIPHCLK_OSPI | RCC_PERIPHCLK_LTDC) -#elif defined(STM32L4R9xx) || defined(STM32L4S9xx) -#define RCC_PERIPHCLOCK_ALL (RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_USART2 | RCC_PERIPHCLK_USART3 | \ - RCC_PERIPHCLK_UART4 | RCC_PERIPHCLK_UART5 | \ - RCC_PERIPHCLK_LPUART1 | \ - RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_I2C2 | RCC_PERIPHCLK_I2C3 | \ - RCC_PERIPHCLK_I2C4 | \ - RCC_PERIPHCLK_LPTIM1 | RCC_PERIPHCLK_LPTIM2 | \ - RCC_PERIPHCLK_SAI1 | RCC_PERIPHCLK_SAI2 | \ - RCC_PERIPHCLK_USB | \ - RCC_PERIPHCLK_ADC | RCC_PERIPHCLK_DFSDM1 | RCC_PERIPHCLK_DFSDM1AUDIO | \ - RCC_PERIPHCLK_RTC | RCC_PERIPHCLK_RNG | RCC_PERIPHCLK_SDMMC1 | \ - RCC_PERIPHCLK_OSPI | RCC_PERIPHCLK_LTDC | RCC_PERIPHCLK_DSI) -#else -#define RCC_PERIPHCLOCK_ALL (RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_USART2 | RCC_PERIPHCLK_USART3 | \ - RCC_PERIPHCLK_UART4 | RCC_PERIPHCLK_UART5 | \ - RCC_PERIPHCLK_LPUART1 | \ - RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_I2C2 | RCC_PERIPHCLK_I2C3 | \ - RCC_PERIPHCLK_LPTIM1 | RCC_PERIPHCLK_LPTIM2 | \ - RCC_PERIPHCLK_SAI1 | RCC_PERIPHCLK_SAI2 | \ - RCC_PERIPHCLK_USB | \ - RCC_PERIPHCLK_ADC | RCC_PERIPHCLK_SWPMI1 | RCC_PERIPHCLK_DFSDM1 | \ - RCC_PERIPHCLK_RTC | RCC_PERIPHCLK_RNG | RCC_PERIPHCLK_SDMMC1) -#endif /* STM32L412xx || STM32L422xx */ - -/** - * @} - */ - -/* Private macros ------------------------------------------------------------*/ -/** @addtogroup RCCEx_Private_Macros - * @{ - */ - -#define IS_RCC_LSCOSOURCE(__SOURCE__) (((__SOURCE__) == RCC_LSCOSOURCE_LSI) || \ - ((__SOURCE__) == RCC_LSCOSOURCE_LSE)) - -#define IS_RCC_PERIPHCLOCK(__SELECTION__) ((((__SELECTION__) & RCC_PERIPHCLOCK_ALL) != 0x00u) && \ - (((__SELECTION__) & ~RCC_PERIPHCLOCK_ALL) == 0x00u)) - -#define IS_RCC_USART1CLKSOURCE(__SOURCE__) \ - (((__SOURCE__) == RCC_USART1CLKSOURCE_PCLK2) || \ - ((__SOURCE__) == RCC_USART1CLKSOURCE_SYSCLK) || \ - ((__SOURCE__) == RCC_USART1CLKSOURCE_LSE) || \ - ((__SOURCE__) == RCC_USART1CLKSOURCE_HSI)) - -#define IS_RCC_USART2CLKSOURCE(__SOURCE__) \ - (((__SOURCE__) == RCC_USART2CLKSOURCE_PCLK1) || \ - ((__SOURCE__) == RCC_USART2CLKSOURCE_SYSCLK) || \ - ((__SOURCE__) == RCC_USART2CLKSOURCE_LSE) || \ - ((__SOURCE__) == RCC_USART2CLKSOURCE_HSI)) - -#if defined(USART3) - -#define IS_RCC_USART3CLKSOURCE(__SOURCE__) \ - (((__SOURCE__) == RCC_USART3CLKSOURCE_PCLK1) || \ - ((__SOURCE__) == RCC_USART3CLKSOURCE_SYSCLK) || \ - ((__SOURCE__) == RCC_USART3CLKSOURCE_LSE) || \ - ((__SOURCE__) == RCC_USART3CLKSOURCE_HSI)) - -#endif /* USART3 */ - -#if defined(UART4) - -#define IS_RCC_UART4CLKSOURCE(__SOURCE__) \ - (((__SOURCE__) == RCC_UART4CLKSOURCE_PCLK1) || \ - ((__SOURCE__) == RCC_UART4CLKSOURCE_SYSCLK) || \ - ((__SOURCE__) == RCC_UART4CLKSOURCE_LSE) || \ - ((__SOURCE__) == RCC_UART4CLKSOURCE_HSI)) - -#endif /* UART4 */ - -#if defined(UART5) - -#define IS_RCC_UART5CLKSOURCE(__SOURCE__) \ - (((__SOURCE__) == RCC_UART5CLKSOURCE_PCLK1) || \ - ((__SOURCE__) == RCC_UART5CLKSOURCE_SYSCLK) || \ - ((__SOURCE__) == RCC_UART5CLKSOURCE_LSE) || \ - ((__SOURCE__) == RCC_UART5CLKSOURCE_HSI)) - -#endif /* UART5 */ - -#define IS_RCC_LPUART1CLKSOURCE(__SOURCE__) \ - (((__SOURCE__) == RCC_LPUART1CLKSOURCE_PCLK1) || \ - ((__SOURCE__) == RCC_LPUART1CLKSOURCE_SYSCLK) || \ - ((__SOURCE__) == RCC_LPUART1CLKSOURCE_LSE) || \ - ((__SOURCE__) == RCC_LPUART1CLKSOURCE_HSI)) - -#define IS_RCC_I2C1CLKSOURCE(__SOURCE__) \ - (((__SOURCE__) == RCC_I2C1CLKSOURCE_PCLK1) || \ - ((__SOURCE__) == RCC_I2C1CLKSOURCE_SYSCLK)|| \ - ((__SOURCE__) == RCC_I2C1CLKSOURCE_HSI)) - -#if defined(I2C2) - -#define IS_RCC_I2C2CLKSOURCE(__SOURCE__) \ - (((__SOURCE__) == RCC_I2C2CLKSOURCE_PCLK1) || \ - ((__SOURCE__) == RCC_I2C2CLKSOURCE_SYSCLK)|| \ - ((__SOURCE__) == RCC_I2C2CLKSOURCE_HSI)) - -#endif /* I2C2 */ - -#define IS_RCC_I2C3CLKSOURCE(__SOURCE__) \ - (((__SOURCE__) == RCC_I2C3CLKSOURCE_PCLK1) || \ - ((__SOURCE__) == RCC_I2C3CLKSOURCE_SYSCLK)|| \ - ((__SOURCE__) == RCC_I2C3CLKSOURCE_HSI)) - -#if defined(I2C4) - -#define IS_RCC_I2C4CLKSOURCE(__SOURCE__) \ - (((__SOURCE__) == RCC_I2C4CLKSOURCE_PCLK1) || \ - ((__SOURCE__) == RCC_I2C4CLKSOURCE_SYSCLK)|| \ - ((__SOURCE__) == RCC_I2C4CLKSOURCE_HSI)) - -#endif /* I2C4 */ - -#if defined(RCC_PLLSAI2_SUPPORT) - -#if defined(STM32L4P5xx) || defined(STM32L4Q5xx) || defined(STM32L4R5xx) || defined(STM32L4R7xx) || defined(STM32L4R9xx) || defined(STM32L4S5xx) || defined(STM32L4S7xx) || defined(STM32L4S9xx) -#define IS_RCC_SAI1CLK(__SOURCE__) \ - (((__SOURCE__) == RCC_SAI1CLKSOURCE_PLLSAI1) || \ - ((__SOURCE__) == RCC_SAI1CLKSOURCE_PLLSAI2) || \ - ((__SOURCE__) == RCC_SAI1CLKSOURCE_PLL) || \ - ((__SOURCE__) == RCC_SAI1CLKSOURCE_PIN) || \ - ((__SOURCE__) == RCC_SAI1CLKSOURCE_HSI)) -#else -#define IS_RCC_SAI1CLK(__SOURCE__) \ - (((__SOURCE__) == RCC_SAI1CLKSOURCE_PLLSAI1) || \ - ((__SOURCE__) == RCC_SAI1CLKSOURCE_PLLSAI2) || \ - ((__SOURCE__) == RCC_SAI1CLKSOURCE_PLL) || \ - ((__SOURCE__) == RCC_SAI1CLKSOURCE_PIN)) -#endif /* STM32L4P5xx || STM32L4Q5xx || STM32L4R5xx || STM32L4R7xx || STM32L4R9xx || STM32L4S5xx || STM32L4S7xx || STM32L4S9xx */ - -#elif defined(RCC_PLLSAI1_SUPPORT) - -#define IS_RCC_SAI1CLK(__SOURCE__) \ - (((__SOURCE__) == RCC_SAI1CLKSOURCE_PLLSAI1) || \ - ((__SOURCE__) == RCC_SAI1CLKSOURCE_PLL) || \ - ((__SOURCE__) == RCC_SAI1CLKSOURCE_PIN)) - -#endif /* RCC_PLLSAI2_SUPPORT */ - -#if defined(RCC_PLLSAI2_SUPPORT) - -#if defined(STM32L4P5xx) || defined(STM32L4Q5xx) || defined(STM32L4R5xx) || defined(STM32L4R7xx) || defined(STM32L4R9xx) || defined(STM32L4S5xx) || defined(STM32L4S7xx) || defined(STM32L4S9xx) -#define IS_RCC_SAI2CLK(__SOURCE__) \ - (((__SOURCE__) == RCC_SAI2CLKSOURCE_PLLSAI1) || \ - ((__SOURCE__) == RCC_SAI2CLKSOURCE_PLLSAI2) || \ - ((__SOURCE__) == RCC_SAI2CLKSOURCE_PLL) || \ - ((__SOURCE__) == RCC_SAI2CLKSOURCE_PIN) || \ - ((__SOURCE__) == RCC_SAI2CLKSOURCE_HSI)) -#else -#define IS_RCC_SAI2CLK(__SOURCE__) \ - (((__SOURCE__) == RCC_SAI2CLKSOURCE_PLLSAI1) || \ - ((__SOURCE__) == RCC_SAI2CLKSOURCE_PLLSAI2) || \ - ((__SOURCE__) == RCC_SAI2CLKSOURCE_PLL) || \ - ((__SOURCE__) == RCC_SAI2CLKSOURCE_PIN)) -#endif /* STM32L4P5xx || STM32L4Q5xx || STM32L4R5xx || STM32L4R7xx || STM32L4R9xx || STM32L4S5xx || STM32L4S7xx || STM32L4S9xx */ - -#endif /* RCC_PLLSAI2_SUPPORT */ - -#define IS_RCC_LPTIM1CLK(__SOURCE__) \ - (((__SOURCE__) == RCC_LPTIM1CLKSOURCE_PCLK1) || \ - ((__SOURCE__) == RCC_LPTIM1CLKSOURCE_LSI) || \ - ((__SOURCE__) == RCC_LPTIM1CLKSOURCE_HSI) || \ - ((__SOURCE__) == RCC_LPTIM1CLKSOURCE_LSE)) - -#define IS_RCC_LPTIM2CLK(__SOURCE__) \ - (((__SOURCE__) == RCC_LPTIM2CLKSOURCE_PCLK1) || \ - ((__SOURCE__) == RCC_LPTIM2CLKSOURCE_LSI) || \ - ((__SOURCE__) == RCC_LPTIM2CLKSOURCE_HSI) || \ - ((__SOURCE__) == RCC_LPTIM2CLKSOURCE_LSE)) - -#if defined(SDMMC1) -#if defined(RCC_HSI48_SUPPORT) && defined(RCC_CCIPR2_SDMMCSEL) - -#define IS_RCC_SDMMC1CLKSOURCE(__SOURCE__) \ - (((__SOURCE__) == RCC_SDMMC1CLKSOURCE_PLLP) || \ - ((__SOURCE__) == RCC_SDMMC1CLKSOURCE_HSI48) || \ - ((__SOURCE__) == RCC_SDMMC1CLKSOURCE_PLLSAI1) || \ - ((__SOURCE__) == RCC_SDMMC1CLKSOURCE_PLL) || \ - ((__SOURCE__) == RCC_SDMMC1CLKSOURCE_MSI)) - -#elif defined(RCC_HSI48_SUPPORT) - -#define IS_RCC_SDMMC1CLKSOURCE(__SOURCE__) \ - (((__SOURCE__) == RCC_SDMMC1CLKSOURCE_HSI48) || \ - ((__SOURCE__) == RCC_SDMMC1CLKSOURCE_PLLSAI1) || \ - ((__SOURCE__) == RCC_SDMMC1CLKSOURCE_PLL) || \ - ((__SOURCE__) == RCC_SDMMC1CLKSOURCE_MSI)) -#else - -#define IS_RCC_SDMMC1CLKSOURCE(__SOURCE__) \ - (((__SOURCE__) == RCC_SDMMC1CLKSOURCE_NONE) || \ - ((__SOURCE__) == RCC_SDMMC1CLKSOURCE_PLLSAI1) || \ - ((__SOURCE__) == RCC_SDMMC1CLKSOURCE_PLL) || \ - ((__SOURCE__) == RCC_SDMMC1CLKSOURCE_MSI)) - -#endif /* RCC_HSI48_SUPPORT */ -#endif /* SDMMC1 */ - -#if defined(RCC_HSI48_SUPPORT) - -#if defined(RCC_PLLSAI1_SUPPORT) -#define IS_RCC_RNGCLKSOURCE(__SOURCE__) \ - (((__SOURCE__) == RCC_RNGCLKSOURCE_HSI48) || \ - ((__SOURCE__) == RCC_RNGCLKSOURCE_PLLSAI1) || \ - ((__SOURCE__) == RCC_RNGCLKSOURCE_PLL) || \ - ((__SOURCE__) == RCC_RNGCLKSOURCE_MSI)) -#else -#define IS_RCC_RNGCLKSOURCE(__SOURCE__) \ - (((__SOURCE__) == RCC_RNGCLKSOURCE_HSI48) || \ - ((__SOURCE__) == RCC_RNGCLKSOURCE_PLL) || \ - ((__SOURCE__) == RCC_RNGCLKSOURCE_MSI)) -#endif /* RCC_PLLSAI1_SUPPORT */ - -#else - -#define IS_RCC_RNGCLKSOURCE(__SOURCE__) \ - (((__SOURCE__) == RCC_RNGCLKSOURCE_NONE) || \ - ((__SOURCE__) == RCC_RNGCLKSOURCE_PLLSAI1) || \ - ((__SOURCE__) == RCC_RNGCLKSOURCE_PLL) || \ - ((__SOURCE__) == RCC_RNGCLKSOURCE_MSI)) - -#endif /* RCC_HSI48_SUPPORT */ - -#if defined(USB_OTG_FS) || defined(USB) -#if defined(RCC_HSI48_SUPPORT) - -#if defined(RCC_PLLSAI1_SUPPORT) -#define IS_RCC_USBCLKSOURCE(__SOURCE__) \ - (((__SOURCE__) == RCC_USBCLKSOURCE_HSI48) || \ - ((__SOURCE__) == RCC_USBCLKSOURCE_PLLSAI1) || \ - ((__SOURCE__) == RCC_USBCLKSOURCE_PLL) || \ - ((__SOURCE__) == RCC_USBCLKSOURCE_MSI)) -#else -#define IS_RCC_USBCLKSOURCE(__SOURCE__) \ - (((__SOURCE__) == RCC_USBCLKSOURCE_HSI48) || \ - ((__SOURCE__) == RCC_USBCLKSOURCE_PLL) || \ - ((__SOURCE__) == RCC_USBCLKSOURCE_MSI)) -#endif /* RCC_PLLSAI1_SUPPORT */ - -#else - -#define IS_RCC_USBCLKSOURCE(__SOURCE__) \ - (((__SOURCE__) == RCC_USBCLKSOURCE_NONE) || \ - ((__SOURCE__) == RCC_USBCLKSOURCE_PLLSAI1) || \ - ((__SOURCE__) == RCC_USBCLKSOURCE_PLL) || \ - ((__SOURCE__) == RCC_USBCLKSOURCE_MSI)) - -#endif /* RCC_HSI48_SUPPORT */ -#endif /* USB_OTG_FS || USB */ - -#if defined(STM32L471xx) || defined(STM32L475xx) || defined(STM32L476xx) || defined(STM32L485xx) || defined(STM32L486xx) || defined(STM32L496xx) || defined(STM32L4A6xx) - -#define IS_RCC_ADCCLKSOURCE(__SOURCE__) \ - (((__SOURCE__) == RCC_ADCCLKSOURCE_NONE) || \ - ((__SOURCE__) == RCC_ADCCLKSOURCE_PLLSAI1) || \ - ((__SOURCE__) == RCC_ADCCLKSOURCE_PLLSAI2) || \ - ((__SOURCE__) == RCC_ADCCLKSOURCE_SYSCLK)) - -#else - -#if defined(RCC_PLLSAI1_SUPPORT) -#define IS_RCC_ADCCLKSOURCE(__SOURCE__) \ - (((__SOURCE__) == RCC_ADCCLKSOURCE_NONE) || \ - ((__SOURCE__) == RCC_ADCCLKSOURCE_PLLSAI1) || \ - ((__SOURCE__) == RCC_ADCCLKSOURCE_SYSCLK)) -#else -#define IS_RCC_ADCCLKSOURCE(__SOURCE__) \ - (((__SOURCE__) == RCC_ADCCLKSOURCE_NONE) || \ - ((__SOURCE__) == RCC_ADCCLKSOURCE_SYSCLK)) -#endif /* RCC_PLLSAI1_SUPPORT */ - -#endif /* STM32L471xx || STM32L475xx || STM32L476xx || STM32L485xx || STM32L486xx || STM32L496xx || STM32L4A6xx */ - -#if defined(SWPMI1) - -#define IS_RCC_SWPMI1CLKSOURCE(__SOURCE__) \ - (((__SOURCE__) == RCC_SWPMI1CLKSOURCE_PCLK1) || \ - ((__SOURCE__) == RCC_SWPMI1CLKSOURCE_HSI)) - -#endif /* SWPMI1 */ - -#if defined(DFSDM1_Filter0) - -#define IS_RCC_DFSDM1CLKSOURCE(__SOURCE__) \ - (((__SOURCE__) == RCC_DFSDM1CLKSOURCE_PCLK2) || \ - ((__SOURCE__) == RCC_DFSDM1CLKSOURCE_SYSCLK)) - -#if defined(STM32L4P5xx) || defined(STM32L4Q5xx) || defined(STM32L4R5xx) || defined(STM32L4R7xx) || defined(STM32L4R9xx) || defined(STM32L4S5xx) || defined(STM32L4S7xx) || defined(STM32L4S9xx) - -#define IS_RCC_DFSDM1AUDIOCLKSOURCE(__SOURCE__) \ - (((__SOURCE__) == RCC_DFSDM1AUDIOCLKSOURCE_SAI1) || \ - ((__SOURCE__) == RCC_DFSDM1AUDIOCLKSOURCE_HSI) || \ - ((__SOURCE__) == RCC_DFSDM1AUDIOCLKSOURCE_MSI)) - -#endif /* STM32L4P5xx || STM32L4Q5xx || STM32L4R5xx || STM32L4R7xx || STM32L4R9xx || STM32L4S5xx || STM32L4S7xx || STM32L4S9xx */ - -#endif /* DFSDM1_Filter0 */ - -#if defined(LTDC) - -#define IS_RCC_LTDCCLKSOURCE(__SOURCE__) \ - (((__SOURCE__) == RCC_LTDCCLKSOURCE_PLLSAI2_DIV2) || \ - ((__SOURCE__) == RCC_LTDCCLKSOURCE_PLLSAI2_DIV4) || \ - ((__SOURCE__) == RCC_LTDCCLKSOURCE_PLLSAI2_DIV8) || \ - ((__SOURCE__) == RCC_LTDCCLKSOURCE_PLLSAI2_DIV16)) - -#endif /* LTDC */ - -#if defined(DSI) - -#define IS_RCC_DSICLKSOURCE(__SOURCE__) \ - (((__SOURCE__) == RCC_DSICLKSOURCE_DSIPHY) || \ - ((__SOURCE__) == RCC_DSICLKSOURCE_PLLSAI2)) - -#endif /* DSI */ - -#if defined(OCTOSPI1) || defined(OCTOSPI2) - -#define IS_RCC_OSPICLKSOURCE(__SOURCE__) \ - (((__SOURCE__) == RCC_OSPICLKSOURCE_SYSCLK) || \ - ((__SOURCE__) == RCC_OSPICLKSOURCE_MSI) || \ - ((__SOURCE__) == RCC_OSPICLKSOURCE_PLL)) - -#endif /* OCTOSPI1 || OCTOSPI2 */ - -#if defined(RCC_PLLSAI1_SUPPORT) - -#define IS_RCC_PLLSAI1SOURCE(__VALUE__) IS_RCC_PLLSOURCE(__VALUE__) - -#if defined(RCC_PLLSAI1M_DIV_1_16_SUPPORT) -#define IS_RCC_PLLSAI1M_VALUE(__VALUE__) ((1U <= (__VALUE__)) && ((__VALUE__) <= 16U)) -#else -#define IS_RCC_PLLSAI1M_VALUE(__VALUE__) ((1U <= (__VALUE__)) && ((__VALUE__) <= 8U)) -#endif /* RCC_PLLSAI1M_DIV_1_16_SUPPORT */ - -#if defined(RCC_PLLSAI1N_MUL_8_127_SUPPORT) -#define IS_RCC_PLLSAI1N_VALUE(__VALUE__) ((8U <= (__VALUE__)) && ((__VALUE__) <= 127U)) -#else -#define IS_RCC_PLLSAI1N_VALUE(__VALUE__) ((8U <= (__VALUE__)) && ((__VALUE__) <= 86U)) -#endif /* RCC_PLLSAI1N_MUL_8_127_SUPPORT */ - -#if defined(RCC_PLLSAI1P_DIV_2_31_SUPPORT) -#define IS_RCC_PLLSAI1P_VALUE(__VALUE__) (((__VALUE__) >= 2U) && ((__VALUE__) <= 31U)) -#else -#define IS_RCC_PLLSAI1P_VALUE(__VALUE__) (((__VALUE__) == 7U) || ((__VALUE__) == 17U)) -#endif /* RCC_PLLSAI1P_DIV_2_31_SUPPORT */ - -#define IS_RCC_PLLSAI1Q_VALUE(__VALUE__) (((__VALUE__) == 2U) || ((__VALUE__) == 4U) || \ - ((__VALUE__) == 6U) || ((__VALUE__) == 8U)) - -#define IS_RCC_PLLSAI1R_VALUE(__VALUE__) (((__VALUE__) == 2U) || ((__VALUE__) == 4U) || \ - ((__VALUE__) == 6U) || ((__VALUE__) == 8U)) - -#endif /* RCC_PLLSAI1_SUPPORT */ - -#if defined(RCC_PLLSAI2_SUPPORT) - -#define IS_RCC_PLLSAI2SOURCE(__VALUE__) IS_RCC_PLLSOURCE(__VALUE__) - -#if defined(RCC_PLLSAI2M_DIV_1_16_SUPPORT) -#define IS_RCC_PLLSAI2M_VALUE(__VALUE__) ((1U <= (__VALUE__)) && ((__VALUE__) <= 16U)) -#else -#define IS_RCC_PLLSAI2M_VALUE(__VALUE__) ((1U <= (__VALUE__)) && ((__VALUE__) <= 8U)) -#endif /* RCC_PLLSAI2M_DIV_1_16_SUPPORT */ - -#if defined(RCC_PLLSAI2N_MUL_8_127_SUPPORT) -#define IS_RCC_PLLSAI2N_VALUE(__VALUE__) ((8U <= (__VALUE__)) && ((__VALUE__) <= 127U)) -#else -#define IS_RCC_PLLSAI2N_VALUE(__VALUE__) ((8U <= (__VALUE__)) && ((__VALUE__) <= 86U)) -#endif /* RCC_PLLSAI2N_MUL_8_127_SUPPORT */ - -#if defined(RCC_PLLSAI2P_DIV_2_31_SUPPORT) -#define IS_RCC_PLLSAI2P_VALUE(__VALUE__) (((__VALUE__) >= 2U) && ((__VALUE__) <= 31U)) -#else -#define IS_RCC_PLLSAI2P_VALUE(__VALUE__) (((__VALUE__) == 7U) || ((__VALUE__) == 17U)) -#endif /* RCC_PLLSAI2P_DIV_2_31_SUPPORT */ - -#if defined(RCC_PLLSAI2Q_DIV_SUPPORT) -#define IS_RCC_PLLSAI2Q_VALUE(__VALUE__) (((__VALUE__) == 2U) || ((__VALUE__) == 4U) || \ - ((__VALUE__) == 6U) || ((__VALUE__) == 8U)) -#endif /* RCC_PLLSAI2Q_DIV_SUPPORT */ - -#define IS_RCC_PLLSAI2R_VALUE(__VALUE__) (((__VALUE__) == 2U) || ((__VALUE__) == 4U) || \ - ((__VALUE__) == 6U) || ((__VALUE__) == 8U)) - -#endif /* RCC_PLLSAI2_SUPPORT */ - -#if defined (OCTOSPI1) && defined (OCTOSPI2) -#define IS_RCC_OCTOSPIDELAY(__DELAY__) (((__DELAY__) <= 0xFU)) -#endif /* OCTOSPI1 && OCTOSPI2 */ - -#if defined(CRS) - -#define IS_RCC_CRS_SYNC_SOURCE(__SOURCE__) (((__SOURCE__) == RCC_CRS_SYNC_SOURCE_GPIO) || \ - ((__SOURCE__) == RCC_CRS_SYNC_SOURCE_LSE) || \ - ((__SOURCE__) == RCC_CRS_SYNC_SOURCE_USB)) - -#define IS_RCC_CRS_SYNC_DIV(__DIV__) (((__DIV__) == RCC_CRS_SYNC_DIV1) || ((__DIV__) == RCC_CRS_SYNC_DIV2) || \ - ((__DIV__) == RCC_CRS_SYNC_DIV4) || ((__DIV__) == RCC_CRS_SYNC_DIV8) || \ - ((__DIV__) == RCC_CRS_SYNC_DIV16) || ((__DIV__) == RCC_CRS_SYNC_DIV32) || \ - ((__DIV__) == RCC_CRS_SYNC_DIV64) || ((__DIV__) == RCC_CRS_SYNC_DIV128)) - -#define IS_RCC_CRS_SYNC_POLARITY(__POLARITY__) (((__POLARITY__) == RCC_CRS_SYNC_POLARITY_RISING) || \ - ((__POLARITY__) == RCC_CRS_SYNC_POLARITY_FALLING)) - -#define IS_RCC_CRS_RELOADVALUE(__VALUE__) (((__VALUE__) <= 0xFFFFU)) - -#define IS_RCC_CRS_ERRORLIMIT(__VALUE__) (((__VALUE__) <= 0xFFU)) - -#if defined(STM32L412xx) || defined(STM32L422xx) -#define IS_RCC_CRS_HSI48CALIBRATION(__VALUE__) (((__VALUE__) <= 0x7FU)) -#else -#define IS_RCC_CRS_HSI48CALIBRATION(__VALUE__) (((__VALUE__) <= 0x3FU)) -#endif /* STM32L412xx || STM32L422xx */ - -#define IS_RCC_CRS_FREQERRORDIR(__DIR__) (((__DIR__) == RCC_CRS_FREQERRORDIR_UP) || \ - ((__DIR__) == RCC_CRS_FREQERRORDIR_DOWN)) - -#endif /* CRS */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /* STM32L4xx_HAL_RCC_EX_H */ - +/** + ****************************************************************************** + * @file stm32l4xx_hal_rcc_ex.h + * @author MCD Application Team + * @brief Header file of RCC HAL Extended module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file in + * the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32L4xx_HAL_RCC_EX_H +#define STM32L4xx_HAL_RCC_EX_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l4xx_hal_def.h" + +/** @addtogroup STM32L4xx_HAL_Driver + * @{ + */ + +/** @addtogroup RCCEx + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ + +/** @defgroup RCCEx_Exported_Types RCCEx Exported Types + * @{ + */ + +#if defined(RCC_PLLSAI1_SUPPORT) +/** + * @brief PLLSAI1 Clock structure definition + */ +typedef struct +{ + + uint32_t PLLSAI1Source; /*!< PLLSAI1Source: PLLSAI1 entry clock source. + This parameter must be a value of @ref RCC_PLL_Clock_Source */ + +#if defined(RCC_PLLSAI1M_DIV_1_16_SUPPORT) + uint32_t PLLSAI1M; /*!< PLLSAI1M: specifies the division factor for PLLSAI1 input clock. + This parameter must be a number between Min_Data = 1 and Max_Data = 16 */ +#else + uint32_t PLLSAI1M; /*!< PLLSAI1M: specifies the division factor for PLLSAI1 input clock. + This parameter must be a number between Min_Data = 1 and Max_Data = 8 */ +#endif + + uint32_t PLLSAI1N; /*!< PLLSAI1N: specifies the multiplication factor for PLLSAI1 VCO output clock. + This parameter must be a number between 8 and 86 or 127 depending on devices. */ + + uint32_t PLLSAI1P; /*!< PLLSAI1P: specifies the division factor for SAI clock. + This parameter must be a value of @ref RCC_PLLP_Clock_Divider */ + + uint32_t PLLSAI1Q; /*!< PLLSAI1Q: specifies the division factor for USB/RNG/SDMMC1 clock. + This parameter must be a value of @ref RCC_PLLQ_Clock_Divider */ + + uint32_t PLLSAI1R; /*!< PLLSAI1R: specifies the division factor for ADC clock. + This parameter must be a value of @ref RCC_PLLR_Clock_Divider */ + + uint32_t PLLSAI1ClockOut; /*!< PLLSAIClockOut: specifies PLLSAI1 output clock to be enabled. + This parameter must be a value of @ref RCC_PLLSAI1_Clock_Output */ +}RCC_PLLSAI1InitTypeDef; +#endif /* RCC_PLLSAI1_SUPPORT */ + +#if defined(RCC_PLLSAI2_SUPPORT) +/** + * @brief PLLSAI2 Clock structure definition + */ +typedef struct +{ + + uint32_t PLLSAI2Source; /*!< PLLSAI2Source: PLLSAI2 entry clock source. + This parameter must be a value of @ref RCC_PLL_Clock_Source */ + +#if defined(RCC_PLLSAI2M_DIV_1_16_SUPPORT) + uint32_t PLLSAI2M; /*!< PLLSAI2M: specifies the division factor for PLLSAI2 input clock. + This parameter must be a number between Min_Data = 1 and Max_Data = 16 */ +#else + uint32_t PLLSAI2M; /*!< PLLSAI2M: specifies the division factor for PLLSAI2 input clock. + This parameter must be a number between Min_Data = 1 and Max_Data = 8 */ +#endif + + uint32_t PLLSAI2N; /*!< PLLSAI2N: specifies the multiplication factor for PLLSAI2 VCO output clock. + This parameter must be a number between 8 and 86 or 127 depending on devices. */ + + uint32_t PLLSAI2P; /*!< PLLSAI2P: specifies the division factor for SAI clock. + This parameter must be a value of @ref RCC_PLLP_Clock_Divider */ + +#if defined(RCC_PLLSAI2Q_DIV_SUPPORT) + uint32_t PLLSAI2Q; /*!< PLLSAI2Q: specifies the division factor for DSI clock. + This parameter must be a value of @ref RCC_PLLQ_Clock_Divider */ +#endif + + uint32_t PLLSAI2R; /*!< PLLSAI2R: specifies the division factor for ADC clock. + This parameter must be a value of @ref RCC_PLLR_Clock_Divider */ + + uint32_t PLLSAI2ClockOut; /*!< PLLSAIClockOut: specifies PLLSAI2 output clock to be enabled. + This parameter must be a value of @ref RCC_PLLSAI2_Clock_Output */ +}RCC_PLLSAI2InitTypeDef; + +#endif /* RCC_PLLSAI2_SUPPORT */ + +/** + * @brief RCC extended clocks structure definition + */ +typedef struct +{ + uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured. + This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */ +#if defined(RCC_PLLSAI1_SUPPORT) + + RCC_PLLSAI1InitTypeDef PLLSAI1; /*!< PLLSAI1 structure parameters. + This parameter will be used only when PLLSAI1 is selected as Clock Source for SAI1, USB/RNG/SDMMC1 or ADC */ +#endif /* RCC_PLLSAI1_SUPPORT */ +#if defined(RCC_PLLSAI2_SUPPORT) + + RCC_PLLSAI2InitTypeDef PLLSAI2; /*!< PLLSAI2 structure parameters. + This parameter will be used only when PLLSAI2 is selected as Clock Source for SAI2 or ADC */ + +#endif /* RCC_PLLSAI2_SUPPORT */ + + uint32_t Usart1ClockSelection; /*!< Specifies USART1 clock source. + This parameter can be a value of @ref RCCEx_USART1_Clock_Source */ + + uint32_t Usart2ClockSelection; /*!< Specifies USART2 clock source. + This parameter can be a value of @ref RCCEx_USART2_Clock_Source */ + +#if defined(USART3) + + uint32_t Usart3ClockSelection; /*!< Specifies USART3 clock source. + This parameter can be a value of @ref RCCEx_USART3_Clock_Source */ + +#endif /* USART3 */ + +#if defined(UART4) + + uint32_t Uart4ClockSelection; /*!< Specifies UART4 clock source. + This parameter can be a value of @ref RCCEx_UART4_Clock_Source */ + +#endif /* UART4 */ + +#if defined(UART5) + + uint32_t Uart5ClockSelection; /*!< Specifies UART5 clock source. + This parameter can be a value of @ref RCCEx_UART5_Clock_Source */ + +#endif /* UART5 */ + + uint32_t Lpuart1ClockSelection; /*!< Specifies LPUART1 clock source. + This parameter can be a value of @ref RCCEx_LPUART1_Clock_Source */ + + uint32_t I2c1ClockSelection; /*!< Specifies I2C1 clock source. + This parameter can be a value of @ref RCCEx_I2C1_Clock_Source */ + +#if defined(I2C2) + + uint32_t I2c2ClockSelection; /*!< Specifies I2C2 clock source. + This parameter can be a value of @ref RCCEx_I2C2_Clock_Source */ + +#endif /* I2C2 */ + + uint32_t I2c3ClockSelection; /*!< Specifies I2C3 clock source. + This parameter can be a value of @ref RCCEx_I2C3_Clock_Source */ + +#if defined(I2C4) + + uint32_t I2c4ClockSelection; /*!< Specifies I2C4 clock source. + This parameter can be a value of @ref RCCEx_I2C4_Clock_Source */ + +#endif /* I2C4 */ + + uint32_t Lptim1ClockSelection; /*!< Specifies LPTIM1 clock source. + This parameter can be a value of @ref RCCEx_LPTIM1_Clock_Source */ + + uint32_t Lptim2ClockSelection; /*!< Specifies LPTIM2 clock source. + This parameter can be a value of @ref RCCEx_LPTIM2_Clock_Source */ +#if defined(SAI1) + + uint32_t Sai1ClockSelection; /*!< Specifies SAI1 clock source. + This parameter can be a value of @ref RCCEx_SAI1_Clock_Source */ +#endif /* SAI1 */ + +#if defined(SAI2) + + uint32_t Sai2ClockSelection; /*!< Specifies SAI2 clock source. + This parameter can be a value of @ref RCCEx_SAI2_Clock_Source */ + +#endif /* SAI2 */ + +#if defined(USB_OTG_FS) || defined(USB) + + uint32_t UsbClockSelection; /*!< Specifies USB clock source (warning: same source for SDMMC1 and RNG). + This parameter can be a value of @ref RCCEx_USB_Clock_Source */ + +#endif /* USB_OTG_FS || USB */ + +#if defined(SDMMC1) + + uint32_t Sdmmc1ClockSelection; /*!< Specifies SDMMC1 clock source (warning: same source for USB and RNG). + This parameter can be a value of @ref RCCEx_SDMMC1_Clock_Source */ + +#endif /* SDMMC1 */ + + uint32_t RngClockSelection; /*!< Specifies RNG clock source (warning: same source for USB and SDMMC1). + This parameter can be a value of @ref RCCEx_RNG_Clock_Source */ + +#if !defined(STM32L412xx) && !defined(STM32L422xx) + uint32_t AdcClockSelection; /*!< Specifies ADC interface clock source. + This parameter can be a value of @ref RCCEx_ADC_Clock_Source */ +#endif /* !STM32L412xx && !STM32L422xx */ + +#if defined(SWPMI1) + + uint32_t Swpmi1ClockSelection; /*!< Specifies SWPMI1 clock source. + This parameter can be a value of @ref RCCEx_SWPMI1_Clock_Source */ + +#endif /* SWPMI1 */ + +#if defined(DFSDM1_Filter0) + + uint32_t Dfsdm1ClockSelection; /*!< Specifies DFSDM1 clock source. + This parameter can be a value of @ref RCCEx_DFSDM1_Clock_Source */ + +#if defined(STM32L4P5xx) || defined(STM32L4Q5xx) || defined(STM32L4R5xx) || defined(STM32L4R7xx) || defined(STM32L4R9xx) || defined(STM32L4S5xx) || defined(STM32L4S7xx) || defined(STM32L4S9xx) + uint32_t Dfsdm1AudioClockSelection; /*!< Specifies DFSDM1 audio clock source. + This parameter can be a value of @ref RCCEx_DFSDM1_Audio_Clock_Source */ + +#endif /* STM32L4P5xx || STM32L4Q5xx || STM32L4R5xx || STM32L4R7xx || STM32L4R9xx || STM32L4S5xx || STM32L4S7xx || STM32L4S9xx */ + +#endif /* DFSDM1_Filter0 */ + +#if defined(LTDC) + + uint32_t LtdcClockSelection; /*!< Specifies LTDC clock source. + This parameter can be a value of @ref RCCEx_LTDC_Clock_Source */ + +#endif /* LTDC */ + +#if defined(DSI) + + uint32_t DsiClockSelection; /*!< Specifies DSI clock source. + This parameter can be a value of @ref RCCEx_DSI_Clock_Source */ + +#endif /* DSI */ + +#if defined(OCTOSPI1) || defined(OCTOSPI2) + + uint32_t OspiClockSelection; /*!< Specifies OctoSPI clock source. + This parameter can be a value of @ref RCCEx_OSPI_Clock_Source */ + +#endif + + uint32_t RTCClockSelection; /*!< Specifies RTC clock source. + This parameter can be a value of @ref RCC_RTC_Clock_Source */ +}RCC_PeriphCLKInitTypeDef; + +#if defined(CRS) + +/** + * @brief RCC_CRS Init structure definition + */ +typedef struct +{ + uint32_t Prescaler; /*!< Specifies the division factor of the SYNC signal. + This parameter can be a value of @ref RCCEx_CRS_SynchroDivider */ + + uint32_t Source; /*!< Specifies the SYNC signal source. + This parameter can be a value of @ref RCCEx_CRS_SynchroSource */ + + uint32_t Polarity; /*!< Specifies the input polarity for the SYNC signal source. + This parameter can be a value of @ref RCCEx_CRS_SynchroPolarity */ + + uint32_t ReloadValue; /*!< Specifies the value to be loaded in the frequency error counter with each SYNC event. + It can be calculated in using macro __HAL_RCC_CRS_RELOADVALUE_CALCULATE(__FTARGET__, __FSYNC__) + This parameter must be a number between 0 and 0xFFFF or a value of @ref RCCEx_CRS_ReloadValueDefault .*/ + + uint32_t ErrorLimitValue; /*!< Specifies the value to be used to evaluate the captured frequency error value. + This parameter must be a number between 0 and 0xFF or a value of @ref RCCEx_CRS_ErrorLimitDefault */ + + uint32_t HSI48CalibrationValue; /*!< Specifies a user-programmable trimming value to the HSI48 oscillator. + This parameter must be a number between 0 and 0x7F for STM32L412xx/L422xx, between 0 and 0x3F otherwise, + or a value of @ref RCCEx_CRS_HSI48CalibrationDefault */ + +}RCC_CRSInitTypeDef; + +/** + * @brief RCC_CRS Synchronization structure definition + */ +typedef struct +{ + uint32_t ReloadValue; /*!< Specifies the value loaded in the Counter reload value. + This parameter must be a number between 0 and 0xFFFF */ + + uint32_t HSI48CalibrationValue; /*!< Specifies value loaded in HSI48 oscillator smooth trimming. + This parameter must be a number between 0 and 0x7F for STM32L412xx/L422xx, between 0 and 0x3F otherwise */ + + uint32_t FreqErrorCapture; /*!< Specifies the value loaded in the .FECAP, the frequency error counter + value latched in the time of the last SYNC event. + This parameter must be a number between 0 and 0xFFFF */ + + uint32_t FreqErrorDirection; /*!< Specifies the value loaded in the .FEDIR, the counting direction of the + frequency error counter latched in the time of the last SYNC event. + It shows whether the actual frequency is below or above the target. + This parameter must be a value of @ref RCCEx_CRS_FreqErrorDirection*/ + +}RCC_CRSSynchroInfoTypeDef; + +#endif /* CRS */ +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup RCCEx_Exported_Constants RCCEx Exported Constants + * @{ + */ + +/** @defgroup RCCEx_LSCO_Clock_Source Low Speed Clock Source + * @{ + */ +#define RCC_LSCOSOURCE_LSI 0x00000000U /*!< LSI selection for low speed clock output */ +#define RCC_LSCOSOURCE_LSE RCC_BDCR_LSCOSEL /*!< LSE selection for low speed clock output */ +/** + * @} + */ + +/** @defgroup RCCEx_Periph_Clock_Selection Periph Clock Selection + * @{ + */ +#define RCC_PERIPHCLK_USART1 0x00000001U +#define RCC_PERIPHCLK_USART2 0x00000002U +#if defined(USART3) +#define RCC_PERIPHCLK_USART3 0x00000004U +#endif +#if defined(UART4) +#define RCC_PERIPHCLK_UART4 0x00000008U +#endif +#if defined(UART5) +#define RCC_PERIPHCLK_UART5 0x00000010U +#endif +#define RCC_PERIPHCLK_LPUART1 0x00000020U +#define RCC_PERIPHCLK_I2C1 0x00000040U +#if defined(I2C2) +#define RCC_PERIPHCLK_I2C2 0x00000080U +#endif +#define RCC_PERIPHCLK_I2C3 0x00000100U +#define RCC_PERIPHCLK_LPTIM1 0x00000200U +#define RCC_PERIPHCLK_LPTIM2 0x00000400U +#if defined(SAI1) +#define RCC_PERIPHCLK_SAI1 0x00000800U +#endif +#if defined(SAI2) +#define RCC_PERIPHCLK_SAI2 0x00001000U +#endif +#if defined(USB_OTG_FS) || defined(USB) +#define RCC_PERIPHCLK_USB 0x00002000U +#endif +#define RCC_PERIPHCLK_ADC 0x00004000U +#if defined(SWPMI1) +#define RCC_PERIPHCLK_SWPMI1 0x00008000U +#endif +#if defined(DFSDM1_Filter0) +#define RCC_PERIPHCLK_DFSDM1 0x00010000U +#if defined(STM32L4P5xx) || defined(STM32L4Q5xx) || defined(STM32L4R5xx) || defined(STM32L4R7xx) || defined(STM32L4R9xx) || defined(STM32L4S5xx) || defined(STM32L4S7xx) || defined(STM32L4S9xx) +#define RCC_PERIPHCLK_DFSDM1AUDIO 0x00200000U +#endif /* STM32L4P5xx || STM32L4Q5xx || STM32L4R5xx || STM32L4R7xx || STM32L4R9xx || STM32L4S5xx || STM32L4S7xx || STM32L4S9xx */ +#endif +#define RCC_PERIPHCLK_RTC 0x00020000U +#define RCC_PERIPHCLK_RNG 0x00040000U +#if defined(SDMMC1) +#define RCC_PERIPHCLK_SDMMC1 0x00080000U +#endif +#if defined(I2C4) +#define RCC_PERIPHCLK_I2C4 0x00100000U +#endif +#if defined(LTDC) +#define RCC_PERIPHCLK_LTDC 0x00400000U +#endif +#if defined(DSI) +#define RCC_PERIPHCLK_DSI 0x00800000U +#endif +#if defined(OCTOSPI1) || defined(OCTOSPI2) +#define RCC_PERIPHCLK_OSPI 0x01000000U +#endif +/** + * @} + */ + + +/** @defgroup RCCEx_USART1_Clock_Source USART1 Clock Source + * @{ + */ +#define RCC_USART1CLKSOURCE_PCLK2 0x00000000U +#define RCC_USART1CLKSOURCE_SYSCLK RCC_CCIPR_USART1SEL_0 +#define RCC_USART1CLKSOURCE_HSI RCC_CCIPR_USART1SEL_1 +#define RCC_USART1CLKSOURCE_LSE (RCC_CCIPR_USART1SEL_0 | RCC_CCIPR_USART1SEL_1) +/** + * @} + */ + +/** @defgroup RCCEx_USART2_Clock_Source USART2 Clock Source + * @{ + */ +#define RCC_USART2CLKSOURCE_PCLK1 0x00000000U +#define RCC_USART2CLKSOURCE_SYSCLK RCC_CCIPR_USART2SEL_0 +#define RCC_USART2CLKSOURCE_HSI RCC_CCIPR_USART2SEL_1 +#define RCC_USART2CLKSOURCE_LSE (RCC_CCIPR_USART2SEL_0 | RCC_CCIPR_USART2SEL_1) +/** + * @} + */ + +#if defined(USART3) +/** @defgroup RCCEx_USART3_Clock_Source USART3 Clock Source + * @{ + */ +#define RCC_USART3CLKSOURCE_PCLK1 0x00000000U +#define RCC_USART3CLKSOURCE_SYSCLK RCC_CCIPR_USART3SEL_0 +#define RCC_USART3CLKSOURCE_HSI RCC_CCIPR_USART3SEL_1 +#define RCC_USART3CLKSOURCE_LSE (RCC_CCIPR_USART3SEL_0 | RCC_CCIPR_USART3SEL_1) +/** + * @} + */ +#endif /* USART3 */ + +#if defined(UART4) +/** @defgroup RCCEx_UART4_Clock_Source UART4 Clock Source + * @{ + */ +#define RCC_UART4CLKSOURCE_PCLK1 0x00000000U +#define RCC_UART4CLKSOURCE_SYSCLK RCC_CCIPR_UART4SEL_0 +#define RCC_UART4CLKSOURCE_HSI RCC_CCIPR_UART4SEL_1 +#define RCC_UART4CLKSOURCE_LSE (RCC_CCIPR_UART4SEL_0 | RCC_CCIPR_UART4SEL_1) +/** + * @} + */ +#endif /* UART4 */ + +#if defined(UART5) +/** @defgroup RCCEx_UART5_Clock_Source UART5 Clock Source + * @{ + */ +#define RCC_UART5CLKSOURCE_PCLK1 0x00000000U +#define RCC_UART5CLKSOURCE_SYSCLK RCC_CCIPR_UART5SEL_0 +#define RCC_UART5CLKSOURCE_HSI RCC_CCIPR_UART5SEL_1 +#define RCC_UART5CLKSOURCE_LSE (RCC_CCIPR_UART5SEL_0 | RCC_CCIPR_UART5SEL_1) +/** + * @} + */ +#endif /* UART5 */ + +/** @defgroup RCCEx_LPUART1_Clock_Source LPUART1 Clock Source + * @{ + */ +#define RCC_LPUART1CLKSOURCE_PCLK1 0x00000000U +#define RCC_LPUART1CLKSOURCE_SYSCLK RCC_CCIPR_LPUART1SEL_0 +#define RCC_LPUART1CLKSOURCE_HSI RCC_CCIPR_LPUART1SEL_1 +#define RCC_LPUART1CLKSOURCE_LSE (RCC_CCIPR_LPUART1SEL_0 | RCC_CCIPR_LPUART1SEL_1) +/** + * @} + */ + +/** @defgroup RCCEx_I2C1_Clock_Source I2C1 Clock Source + * @{ + */ +#define RCC_I2C1CLKSOURCE_PCLK1 0x00000000U +#define RCC_I2C1CLKSOURCE_SYSCLK RCC_CCIPR_I2C1SEL_0 +#define RCC_I2C1CLKSOURCE_HSI RCC_CCIPR_I2C1SEL_1 +/** + * @} + */ + +#if defined(I2C2) +/** @defgroup RCCEx_I2C2_Clock_Source I2C2 Clock Source + * @{ + */ +#define RCC_I2C2CLKSOURCE_PCLK1 0x00000000U +#define RCC_I2C2CLKSOURCE_SYSCLK RCC_CCIPR_I2C2SEL_0 +#define RCC_I2C2CLKSOURCE_HSI RCC_CCIPR_I2C2SEL_1 +/** + * @} + */ +#endif /* I2C2 */ + +/** @defgroup RCCEx_I2C3_Clock_Source I2C3 Clock Source + * @{ + */ +#define RCC_I2C3CLKSOURCE_PCLK1 0x00000000U +#define RCC_I2C3CLKSOURCE_SYSCLK RCC_CCIPR_I2C3SEL_0 +#define RCC_I2C3CLKSOURCE_HSI RCC_CCIPR_I2C3SEL_1 +/** + * @} + */ + +#if defined(I2C4) +/** @defgroup RCCEx_I2C4_Clock_Source I2C4 Clock Source + * @{ + */ +#define RCC_I2C4CLKSOURCE_PCLK1 0x00000000U +#define RCC_I2C4CLKSOURCE_SYSCLK RCC_CCIPR2_I2C4SEL_0 +#define RCC_I2C4CLKSOURCE_HSI RCC_CCIPR2_I2C4SEL_1 +/** + * @} + */ +#endif /* I2C4 */ + +#if defined(SAI1) +/** @defgroup RCCEx_SAI1_Clock_Source SAI1 Clock Source + * @{ + */ +#define RCC_SAI1CLKSOURCE_PLLSAI1 0x00000000U +#if defined(RCC_PLLSAI2_SUPPORT) +#if defined(STM32L4P5xx) || defined(STM32L4Q5xx) || defined(STM32L4R5xx) || defined(STM32L4R7xx) || defined(STM32L4R9xx) || defined(STM32L4S5xx) || defined(STM32L4S7xx) || defined(STM32L4S9xx) +#define RCC_SAI1CLKSOURCE_PLLSAI2 RCC_CCIPR2_SAI1SEL_0 +#else +#define RCC_SAI1CLKSOURCE_PLLSAI2 RCC_CCIPR_SAI1SEL_0 +#endif /* STM32L4P5xx || STM32L4Q5xx || STM32L4R5xx || STM32L4R7xx || STM32L4R9xx || STM32L4S5xx || STM32L4S7xx || STM32L4S9xx */ +#endif /* RCC_PLLSAI2_SUPPORT */ +#if defined(STM32L4P5xx) || defined(STM32L4Q5xx) || defined(STM32L4R5xx) || defined(STM32L4R7xx) || defined(STM32L4R9xx) || defined(STM32L4S5xx) || defined(STM32L4S7xx) || defined(STM32L4S9xx) +#define RCC_SAI1CLKSOURCE_PLL RCC_CCIPR2_SAI1SEL_1 +#define RCC_SAI1CLKSOURCE_PIN (RCC_CCIPR2_SAI1SEL_1 | RCC_CCIPR2_SAI1SEL_0) +#define RCC_SAI1CLKSOURCE_HSI RCC_CCIPR2_SAI1SEL_2 +#else +#define RCC_SAI1CLKSOURCE_PLL RCC_CCIPR_SAI1SEL_1 +#define RCC_SAI1CLKSOURCE_PIN RCC_CCIPR_SAI1SEL +#endif /* STM32L4P5xx || STM32L4Q5xx || STM32L4R5xx || STM32L4R7xx || STM32L4R9xx || STM32L4S5xx || STM32L4S7xx || STM32L4S9xx */ +/** + * @} + */ +#endif /* SAI1 */ + +#if defined(SAI2) +/** @defgroup RCCEx_SAI2_Clock_Source SAI2 Clock Source + * @{ + */ +#define RCC_SAI2CLKSOURCE_PLLSAI1 0x00000000U +#if defined(STM32L4P5xx) || defined(STM32L4Q5xx) || defined(STM32L4R5xx) || defined(STM32L4R7xx) || defined(STM32L4R9xx) || defined(STM32L4S5xx) || defined(STM32L4S7xx) || defined(STM32L4S9xx) +#define RCC_SAI2CLKSOURCE_PLLSAI2 RCC_CCIPR2_SAI2SEL_0 +#define RCC_SAI2CLKSOURCE_PLL RCC_CCIPR2_SAI2SEL_1 +#define RCC_SAI2CLKSOURCE_PIN (RCC_CCIPR2_SAI2SEL_1 | RCC_CCIPR2_SAI2SEL_0) +#define RCC_SAI2CLKSOURCE_HSI RCC_CCIPR2_SAI2SEL_2 +#else +#define RCC_SAI2CLKSOURCE_PLLSAI2 RCC_CCIPR_SAI2SEL_0 +#define RCC_SAI2CLKSOURCE_PLL RCC_CCIPR_SAI2SEL_1 +#define RCC_SAI2CLKSOURCE_PIN RCC_CCIPR_SAI2SEL +#endif /* STM32L4P5xx || STM32L4Q5xx || STM32L4R5xx || STM32L4R7xx || STM32L4R9xx || STM32L4S5xx || STM32L4S7xx || STM32L4S9xx */ +/** + * @} + */ +#endif /* SAI2 */ + +/** @defgroup RCCEx_LPTIM1_Clock_Source LPTIM1 Clock Source + * @{ + */ +#define RCC_LPTIM1CLKSOURCE_PCLK1 0x00000000U +#define RCC_LPTIM1CLKSOURCE_LSI RCC_CCIPR_LPTIM1SEL_0 +#define RCC_LPTIM1CLKSOURCE_HSI RCC_CCIPR_LPTIM1SEL_1 +#define RCC_LPTIM1CLKSOURCE_LSE RCC_CCIPR_LPTIM1SEL +/** + * @} + */ + +/** @defgroup RCCEx_LPTIM2_Clock_Source LPTIM2 Clock Source + * @{ + */ +#define RCC_LPTIM2CLKSOURCE_PCLK1 0x00000000U +#define RCC_LPTIM2CLKSOURCE_LSI RCC_CCIPR_LPTIM2SEL_0 +#define RCC_LPTIM2CLKSOURCE_HSI RCC_CCIPR_LPTIM2SEL_1 +#define RCC_LPTIM2CLKSOURCE_LSE RCC_CCIPR_LPTIM2SEL +/** + * @} + */ + +#if defined(SDMMC1) +/** @defgroup RCCEx_SDMMC1_Clock_Source SDMMC1 Clock Source + * @{ + */ +#if defined(RCC_HSI48_SUPPORT) +#define RCC_SDMMC1CLKSOURCE_HSI48 0x00000000U /*!< HSI48 clock selected as SDMMC1 clock */ +#else +#define RCC_SDMMC1CLKSOURCE_NONE 0x00000000U /*!< No clock selected as SDMMC1 clock */ +#endif /* RCC_HSI48_SUPPORT */ +#define RCC_SDMMC1CLKSOURCE_PLLSAI1 RCC_CCIPR_CLK48SEL_0 /*!< PLLSAI1 "Q" clock selected as SDMMC1 clock */ +#define RCC_SDMMC1CLKSOURCE_PLL RCC_CCIPR_CLK48SEL_1 /*!< PLL "Q" clock selected as SDMMC1 clock */ +#define RCC_SDMMC1CLKSOURCE_MSI RCC_CCIPR_CLK48SEL /*!< MSI clock selected as SDMMC1 clock */ +#if defined(RCC_CCIPR2_SDMMCSEL) +#define RCC_SDMMC1CLKSOURCE_PLLP RCC_CCIPR2_SDMMCSEL /*!< PLL "P" clock selected as SDMMC1 kernel clock */ +#endif /* RCC_CCIPR2_SDMMCSEL */ +/** + * @} + */ +#endif /* SDMMC1 */ + +/** @defgroup RCCEx_RNG_Clock_Source RNG Clock Source + * @{ + */ +#if defined(RCC_HSI48_SUPPORT) +#define RCC_RNGCLKSOURCE_HSI48 0x00000000U +#else +#define RCC_RNGCLKSOURCE_NONE 0x00000000U +#endif /* RCC_HSI48_SUPPORT */ +#if defined(RCC_PLLSAI1_SUPPORT) +#define RCC_RNGCLKSOURCE_PLLSAI1 RCC_CCIPR_CLK48SEL_0 +#endif /* RCC_PLLSAI1_SUPPORT */ +#define RCC_RNGCLKSOURCE_PLL RCC_CCIPR_CLK48SEL_1 +#define RCC_RNGCLKSOURCE_MSI RCC_CCIPR_CLK48SEL +/** + * @} + */ + +#if defined(USB_OTG_FS) || defined(USB) +/** @defgroup RCCEx_USB_Clock_Source USB Clock Source + * @{ + */ +#if defined(RCC_HSI48_SUPPORT) +#define RCC_USBCLKSOURCE_HSI48 0x00000000U +#else +#define RCC_USBCLKSOURCE_NONE 0x00000000U +#endif /* RCC_HSI48_SUPPORT */ +#if defined(RCC_PLLSAI1_SUPPORT) +#define RCC_USBCLKSOURCE_PLLSAI1 RCC_CCIPR_CLK48SEL_0 +#endif /* RCC_PLLSAI1_SUPPORT */ +#define RCC_USBCLKSOURCE_PLL RCC_CCIPR_CLK48SEL_1 +#define RCC_USBCLKSOURCE_MSI RCC_CCIPR_CLK48SEL +/** + * @} + */ +#endif /* USB_OTG_FS || USB */ + +/** @defgroup RCCEx_ADC_Clock_Source ADC Clock Source + * @{ + */ +#define RCC_ADCCLKSOURCE_NONE 0x00000000U +#if defined(RCC_PLLSAI1_SUPPORT) +#define RCC_ADCCLKSOURCE_PLLSAI1 RCC_CCIPR_ADCSEL_0 +#endif /* RCC_PLLSAI1_SUPPORT */ +#if defined(STM32L471xx) || defined(STM32L475xx) || defined(STM32L476xx) || defined(STM32L485xx) || defined(STM32L486xx) || defined(STM32L496xx) || defined(STM32L4A6xx) +#define RCC_ADCCLKSOURCE_PLLSAI2 RCC_CCIPR_ADCSEL_1 +#endif /* STM32L471xx || STM32L475xx || STM32L476xx || STM32L485xx || STM32L486xx || STM32L496xx || STM32L4A6xx */ +#if defined(RCC_CCIPR_ADCSEL) +#define RCC_ADCCLKSOURCE_SYSCLK RCC_CCIPR_ADCSEL +#else +#define RCC_ADCCLKSOURCE_SYSCLK 0x30000000U +#endif /* RCC_CCIPR_ADCSEL */ +/** + * @} + */ + +#if defined(SWPMI1) +/** @defgroup RCCEx_SWPMI1_Clock_Source SWPMI1 Clock Source + * @{ + */ +#define RCC_SWPMI1CLKSOURCE_PCLK1 0x00000000U +#define RCC_SWPMI1CLKSOURCE_HSI RCC_CCIPR_SWPMI1SEL +/** + * @} + */ +#endif /* SWPMI1 */ + +#if defined(DFSDM1_Filter0) +/** @defgroup RCCEx_DFSDM1_Clock_Source DFSDM1 Clock Source + * @{ + */ +#define RCC_DFSDM1CLKSOURCE_PCLK2 0x00000000U +#if defined(STM32L4P5xx) || defined(STM32L4Q5xx) || defined(STM32L4R5xx) || defined(STM32L4R7xx) || defined(STM32L4R9xx) || defined(STM32L4S5xx) || defined(STM32L4S7xx) || defined(STM32L4S9xx) +#define RCC_DFSDM1CLKSOURCE_SYSCLK RCC_CCIPR2_DFSDM1SEL +#else +#define RCC_DFSDM1CLKSOURCE_SYSCLK RCC_CCIPR_DFSDM1SEL +#endif /* STM32L4P5xx || STM32L4Q5xx || STM32L4R5xx || STM32L4R7xx || STM32L4R9xx || STM32L4S5xx || STM32L4S7xx || STM32L4S9xx */ +/** + * @} + */ + +#if defined(STM32L4P5xx) || defined(STM32L4Q5xx) || defined(STM32L4R5xx) || defined(STM32L4R7xx) || defined(STM32L4R9xx) || defined(STM32L4S5xx) || defined(STM32L4S7xx) || defined(STM32L4S9xx) +/** @defgroup RCCEx_DFSDM1_Audio_Clock_Source DFSDM1 Audio Clock Source + * @{ + */ +#define RCC_DFSDM1AUDIOCLKSOURCE_SAI1 0x00000000U +#define RCC_DFSDM1AUDIOCLKSOURCE_HSI RCC_CCIPR2_ADFSDM1SEL_0 +#define RCC_DFSDM1AUDIOCLKSOURCE_MSI RCC_CCIPR2_ADFSDM1SEL_1 +/** + * @} + */ +#endif /* STM32L4P5xx || STM32L4Q5xx || STM32L4R5xx || STM32L4R7xx || STM32L4R9xx || STM32L4S5xx || STM32L4S7xx || STM32L4S9xx */ +#endif /* DFSDM1_Filter0 */ + +#if defined(LTDC) +/** @defgroup RCCEx_LTDC_Clock_Source LTDC Clock Source + * @{ + */ +#define RCC_LTDCCLKSOURCE_PLLSAI2_DIV2 0x00000000U +#define RCC_LTDCCLKSOURCE_PLLSAI2_DIV4 RCC_CCIPR2_PLLSAI2DIVR_0 +#define RCC_LTDCCLKSOURCE_PLLSAI2_DIV8 RCC_CCIPR2_PLLSAI2DIVR_1 +#define RCC_LTDCCLKSOURCE_PLLSAI2_DIV16 RCC_CCIPR2_PLLSAI2DIVR +/** + * @} + */ +#endif /* LTDC */ + +#if defined(DSI) +/** @defgroup RCCEx_DSI_Clock_Source DSI Clock Source + * @{ + */ +#define RCC_DSICLKSOURCE_DSIPHY 0x00000000U +#define RCC_DSICLKSOURCE_PLLSAI2 RCC_CCIPR2_DSISEL +/** + * @} + */ +#endif /* DSI */ + +#if defined(OCTOSPI1) || defined(OCTOSPI2) +/** @defgroup RCCEx_OSPI_Clock_Source OctoSPI Clock Source + * @{ + */ +#define RCC_OSPICLKSOURCE_SYSCLK 0x00000000U +#define RCC_OSPICLKSOURCE_MSI RCC_CCIPR2_OSPISEL_0 +#define RCC_OSPICLKSOURCE_PLL RCC_CCIPR2_OSPISEL_1 +/** + * @} + */ +#endif /* OCTOSPI1 || OCTOSPI2 */ + +/** @defgroup RCCEx_EXTI_LINE_LSECSS RCC LSE CSS external interrupt line + * @{ + */ +#define RCC_EXTI_LINE_LSECSS EXTI_IMR1_IM19 /*!< External interrupt line 19 connected to the LSE CSS EXTI Line */ +/** + * @} + */ + +#if defined(CRS) + +/** @defgroup RCCEx_CRS_Status RCCEx CRS Status + * @{ + */ +#define RCC_CRS_NONE 0x00000000U +#define RCC_CRS_TIMEOUT 0x00000001U +#define RCC_CRS_SYNCOK 0x00000002U +#define RCC_CRS_SYNCWARN 0x00000004U +#define RCC_CRS_SYNCERR 0x00000008U +#define RCC_CRS_SYNCMISS 0x00000010U +#define RCC_CRS_TRIMOVF 0x00000020U +/** + * @} + */ + +/** @defgroup RCCEx_CRS_SynchroSource RCCEx CRS SynchroSource + * @{ + */ +#define RCC_CRS_SYNC_SOURCE_GPIO 0x00000000U /*!< Synchro Signal source GPIO */ +#define RCC_CRS_SYNC_SOURCE_LSE CRS_CFGR_SYNCSRC_0 /*!< Synchro Signal source LSE */ +#define RCC_CRS_SYNC_SOURCE_USB CRS_CFGR_SYNCSRC_1 /*!< Synchro Signal source USB SOF (default)*/ +/** + * @} + */ + +/** @defgroup RCCEx_CRS_SynchroDivider RCCEx CRS SynchroDivider + * @{ + */ +#define RCC_CRS_SYNC_DIV1 0x00000000U /*!< Synchro Signal not divided (default) */ +#define RCC_CRS_SYNC_DIV2 CRS_CFGR_SYNCDIV_0 /*!< Synchro Signal divided by 2 */ +#define RCC_CRS_SYNC_DIV4 CRS_CFGR_SYNCDIV_1 /*!< Synchro Signal divided by 4 */ +#define RCC_CRS_SYNC_DIV8 (CRS_CFGR_SYNCDIV_1 | CRS_CFGR_SYNCDIV_0) /*!< Synchro Signal divided by 8 */ +#define RCC_CRS_SYNC_DIV16 CRS_CFGR_SYNCDIV_2 /*!< Synchro Signal divided by 16 */ +#define RCC_CRS_SYNC_DIV32 (CRS_CFGR_SYNCDIV_2 | CRS_CFGR_SYNCDIV_0) /*!< Synchro Signal divided by 32 */ +#define RCC_CRS_SYNC_DIV64 (CRS_CFGR_SYNCDIV_2 | CRS_CFGR_SYNCDIV_1) /*!< Synchro Signal divided by 64 */ +#define RCC_CRS_SYNC_DIV128 CRS_CFGR_SYNCDIV /*!< Synchro Signal divided by 128 */ +/** + * @} + */ + +/** @defgroup RCCEx_CRS_SynchroPolarity RCCEx CRS SynchroPolarity + * @{ + */ +#define RCC_CRS_SYNC_POLARITY_RISING 0x00000000U /*!< Synchro Active on rising edge (default) */ +#define RCC_CRS_SYNC_POLARITY_FALLING CRS_CFGR_SYNCPOL /*!< Synchro Active on falling edge */ +/** + * @} + */ + +/** @defgroup RCCEx_CRS_ReloadValueDefault RCCEx CRS ReloadValueDefault + * @{ + */ +#define RCC_CRS_RELOADVALUE_DEFAULT 0x0000BB7FU /*!< The reset value of the RELOAD field corresponds + to a target frequency of 48 MHz and a synchronization signal frequency of 1 kHz (SOF signal from USB). */ +/** + * @} + */ + +/** @defgroup RCCEx_CRS_ErrorLimitDefault RCCEx CRS ErrorLimitDefault + * @{ + */ +#define RCC_CRS_ERRORLIMIT_DEFAULT 0x00000022U /*!< Default Frequency error limit */ +/** + * @} + */ + +/** @defgroup RCCEx_CRS_HSI48CalibrationDefault RCCEx CRS HSI48CalibrationDefault + * @{ + */ +#if defined(STM32L412xx) || defined(STM32L422xx) +#define RCC_CRS_HSI48CALIBRATION_DEFAULT 0x00000040U /*!< The default value is 64, which corresponds to the middle of the trimming interval. + The trimming step is specified in the product datasheet. A higher TRIM value + corresponds to a higher output frequency */ +#else +#define RCC_CRS_HSI48CALIBRATION_DEFAULT 0x00000020U /*!< The default value is 32, which corresponds to the middle of the trimming interval. + The trimming step is specified in the product datasheet. A higher TRIM value + corresponds to a higher output frequency */ +#endif +/** + * @} + */ + +/** @defgroup RCCEx_CRS_FreqErrorDirection RCCEx CRS FreqErrorDirection + * @{ + */ +#define RCC_CRS_FREQERRORDIR_UP 0x00000000U /*!< Upcounting direction, the actual frequency is above the target */ +#define RCC_CRS_FREQERRORDIR_DOWN CRS_ISR_FEDIR /*!< Downcounting direction, the actual frequency is below the target */ +/** + * @} + */ + +/** @defgroup RCCEx_CRS_Interrupt_Sources RCCEx CRS Interrupt Sources + * @{ + */ +#define RCC_CRS_IT_SYNCOK CRS_CR_SYNCOKIE /*!< SYNC event OK */ +#define RCC_CRS_IT_SYNCWARN CRS_CR_SYNCWARNIE /*!< SYNC warning */ +#define RCC_CRS_IT_ERR CRS_CR_ERRIE /*!< Error */ +#define RCC_CRS_IT_ESYNC CRS_CR_ESYNCIE /*!< Expected SYNC */ +#define RCC_CRS_IT_SYNCERR CRS_CR_ERRIE /*!< SYNC error */ +#define RCC_CRS_IT_SYNCMISS CRS_CR_ERRIE /*!< SYNC missed */ +#define RCC_CRS_IT_TRIMOVF CRS_CR_ERRIE /*!< Trimming overflow or underflow */ + +/** + * @} + */ + +/** @defgroup RCCEx_CRS_Flags RCCEx CRS Flags + * @{ + */ +#define RCC_CRS_FLAG_SYNCOK CRS_ISR_SYNCOKF /*!< SYNC event OK flag */ +#define RCC_CRS_FLAG_SYNCWARN CRS_ISR_SYNCWARNF /*!< SYNC warning flag */ +#define RCC_CRS_FLAG_ERR CRS_ISR_ERRF /*!< Error flag */ +#define RCC_CRS_FLAG_ESYNC CRS_ISR_ESYNCF /*!< Expected SYNC flag */ +#define RCC_CRS_FLAG_SYNCERR CRS_ISR_SYNCERR /*!< SYNC error */ +#define RCC_CRS_FLAG_SYNCMISS CRS_ISR_SYNCMISS /*!< SYNC missed*/ +#define RCC_CRS_FLAG_TRIMOVF CRS_ISR_TRIMOVF /*!< Trimming overflow or underflow */ + +/** + * @} + */ + +#endif /* CRS */ + +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ +/** @defgroup RCCEx_Exported_Macros RCCEx Exported Macros + * @{ + */ + +#if defined(RCC_PLLSAI1_SUPPORT) + +/** + * @brief Macro to configure the PLLSAI1 clock multiplication and division factors. + * + * @note This function must be used only when the PLLSAI1 is disabled. + * @note PLLSAI1 clock source is common with the main PLL (configured through + * __HAL_RCC_PLL_CONFIG() macro) + * + @if STM32L4S9xx + * @param __PLLSAI1M__ specifies the division factor of PLLSAI1 input clock. + * This parameter must be a number between Min_Data = 1 and Max_Data = 16. + * + @endif + * @param __PLLSAI1N__ specifies the multiplication factor for PLLSAI1 VCO output clock. + * This parameter must be a number between 8 and 86 or 127 depending on devices. + * @note You have to set the PLLSAI1N parameter correctly to ensure that the VCO + * output frequency is between 64 and 344 MHz. + * PLLSAI1 clock frequency = f(PLLSAI1) multiplied by PLLSAI1N + * + * @param __PLLSAI1P__ specifies the division factor for SAI clock. + * This parameter must be a number in the range (7 or 17) for STM32L47xxx/L48xxx + * else (2 to 31). + * SAI1 clock frequency = f(PLLSAI1) / PLLSAI1P + * + * @param __PLLSAI1Q__ specifies the division factor for USB/RNG/SDMMC1 clock. + * This parameter must be in the range (2, 4, 6 or 8). + * USB/RNG/SDMMC1 clock frequency = f(PLLSAI1) / PLLSAI1Q + * + * @param __PLLSAI1R__ specifies the division factor for SAR ADC clock. + * This parameter must be in the range (2, 4, 6 or 8). + * ADC clock frequency = f(PLLSAI1) / PLLSAI1R + * + * @retval None + */ +#if defined(RCC_PLLSAI1M_DIV_1_16_SUPPORT) + +#if defined(RCC_PLLSAI1P_DIV_2_31_SUPPORT) + +#define __HAL_RCC_PLLSAI1_CONFIG(__PLLSAI1M__, __PLLSAI1N__, __PLLSAI1P__, __PLLSAI1Q__, __PLLSAI1R__) \ + MODIFY_REG(RCC->PLLSAI1CFGR, \ + (RCC_PLLSAI1CFGR_PLLSAI1M | RCC_PLLSAI1CFGR_PLLSAI1N | RCC_PLLSAI1CFGR_PLLSAI1P | \ + RCC_PLLSAI1CFGR_PLLSAI1Q | RCC_PLLSAI1CFGR_PLLSAI1R | RCC_PLLSAI1CFGR_PLLSAI1PDIV), \ + ((((__PLLSAI1M__) - 1U) << RCC_PLLSAI1CFGR_PLLSAI1M_Pos) | \ + ((__PLLSAI1N__) << RCC_PLLSAI1CFGR_PLLSAI1N_Pos) | \ + ((((__PLLSAI1Q__) >> 1U) - 1U) << RCC_PLLSAI1CFGR_PLLSAI1Q_Pos) | \ + ((((__PLLSAI1R__) >> 1U) - 1U) << RCC_PLLSAI1CFGR_PLLSAI1R_Pos) | \ + ((uint32_t)(__PLLSAI1P__) << RCC_PLLSAI1CFGR_PLLSAI1PDIV_Pos))) + +#else + +#define __HAL_RCC_PLLSAI1_CONFIG(__PLLSAI1M__, __PLLSAI1N__, __PLLSAI1P__, __PLLSAI1Q__, __PLLSAI1R__) \ + MODIFY_REG(RCC->PLLSAI1CFGR, \ + (RCC_PLLSAI1CFGR_PLLSAI1M | RCC_PLLSAI1CFGR_PLLSAI1N | RCC_PLLSAI1CFGR_PLLSAI1P | \ + RCC_PLLSAI1CFGR_PLLSAI1Q | RCC_PLLSAI1CFGR_PLLSAI1R), \ + ((((__PLLSAI1M__) - 1U) << RCC_PLLSAI1CFGR_PLLSAI1M_Pos) | \ + ((__PLLSAI1N__) << RCC_PLLSAI1CFGR_PLLSAI1N_Pos) | \ + ((((__PLLSAI1Q__) >> 1U) - 1U) << RCC_PLLSAI1CFGR_PLLSAI1Q_Pos) | \ + ((((__PLLSAI1R__) >> 1U) - 1U) << RCC_PLLSAI1CFGR_PLLSAI1R_Pos) | \ + (((__PLLSAI1P__) >> 4U) << RCC_PLLSAI1CFGR_PLLSAI1P_Pos))) + +#endif /* RCC_PLLSAI1P_DIV_2_31_SUPPORT */ + +#else + +#if defined(RCC_PLLSAI1P_DIV_2_31_SUPPORT) + +#define __HAL_RCC_PLLSAI1_CONFIG(__PLLSAI1N__, __PLLSAI1P__, __PLLSAI1Q__, __PLLSAI1R__) \ + MODIFY_REG(RCC->PLLSAI1CFGR, \ + (RCC_PLLSAI1CFGR_PLLSAI1N | RCC_PLLSAI1CFGR_PLLSAI1P | \ + RCC_PLLSAI1CFGR_PLLSAI1Q | RCC_PLLSAI1CFGR_PLLSAI1R | RCC_PLLSAI1CFGR_PLLSAI1PDIV), \ + (((__PLLSAI1N__) << RCC_PLLSAI1CFGR_PLLSAI1N_Pos) | \ + ((((__PLLSAI1Q__) >> 1U) - 1U) << RCC_PLLSAI1CFGR_PLLSAI1Q_Pos) | \ + ((((__PLLSAI1R__) >> 1U) - 1U) << RCC_PLLSAI1CFGR_PLLSAI1R_Pos) | \ + ((uint32_t)(__PLLSAI1P__) << RCC_PLLSAI1CFGR_PLLSAI1PDIV_Pos))) + +#else + +#define __HAL_RCC_PLLSAI1_CONFIG(__PLLSAI1N__, __PLLSAI1P__, __PLLSAI1Q__, __PLLSAI1R__) \ + MODIFY_REG(RCC->PLLSAI1CFGR, \ + (RCC_PLLSAI1CFGR_PLLSAI1N | RCC_PLLSAI1CFGR_PLLSAI1P | \ + RCC_PLLSAI1CFGR_PLLSAI1Q | RCC_PLLSAI1CFGR_PLLSAI1R), \ + (((__PLLSAI1N__) << RCC_PLLSAI1CFGR_PLLSAI1N_Pos) | \ + ((((__PLLSAI1Q__) >> 1U) - 1U) << RCC_PLLSAI1CFGR_PLLSAI1Q_Pos) | \ + ((((__PLLSAI1R__) >> 1U) - 1U) << RCC_PLLSAI1CFGR_PLLSAI1R_Pos) | \ + (((__PLLSAI1P__) >> 4U) << RCC_PLLSAI1CFGR_PLLSAI1P_Pos))) + +#endif /* RCC_PLLSAI1P_DIV_2_31_SUPPORT */ + +#endif /* RCC_PLLSAI1M_DIV_1_16_SUPPORT */ + +/** + * @brief Macro to configure the PLLSAI1 clock multiplication factor N. + * + * @note This function must be used only when the PLLSAI1 is disabled. + * @note PLLSAI1 clock source is common with the main PLL (configured through + * __HAL_RCC_PLL_CONFIG() macro) + * + * @param __PLLSAI1N__ specifies the multiplication factor for PLLSAI1 VCO output clock. + * This parameter must be a number between 8 and 86 or 127 depending on devices. + * @note You have to set the PLLSAI1N parameter correctly to ensure that the VCO + * output frequency is between 64 and 344 MHz. + * Use to set PLLSAI1 clock frequency = f(PLLSAI1) multiplied by PLLSAI1N + * + * @retval None + */ +#define __HAL_RCC_PLLSAI1_MULN_CONFIG(__PLLSAI1N__) \ + MODIFY_REG(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1N, (__PLLSAI1N__) << RCC_PLLSAI1CFGR_PLLSAI1N_Pos) + +#if defined(RCC_PLLSAI1M_DIV_1_16_SUPPORT) + +/** @brief Macro to configure the PLLSAI1 input clock division factor M. + * + * @note This function must be used only when the PLLSAI1 is disabled. + * @note PLLSAI1 clock source is common with the main PLL (configured through + * __HAL_RCC_PLL_CONFIG() macro) + * + * @param __PLLSAI1M__ specifies the division factor for PLLSAI1 clock. + * This parameter must be a number between Min_Data = 1 and Max_Data = 16. + * + * @retval None + */ + +#define __HAL_RCC_PLLSAI1_DIVM_CONFIG(__PLLSAI1M__) \ + MODIFY_REG(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1M, ((__PLLSAI1M__) - 1U) << RCC_PLLSAI1CFGR_PLLSAI1M_Pos) + +#endif /* RCC_PLLSAI1M_DIV_1_16_SUPPORT */ + +/** @brief Macro to configure the PLLSAI1 clock division factor P. + * + * @note This function must be used only when the PLLSAI1 is disabled. + * @note PLLSAI1 clock source is common with the main PLL (configured through + * __HAL_RCC_PLL_CONFIG() macro) + * + * @param __PLLSAI1P__ specifies the division factor for SAI clock. + * This parameter must be a number in the range (7 or 17) for STM32L47xxx/L48xxx + * else (2 to 31). + * Use to set SAI1 clock frequency = f(PLLSAI1) / PLLSAI1P + * + * @retval None + */ +#if defined(RCC_PLLSAI1P_DIV_2_31_SUPPORT) + +#define __HAL_RCC_PLLSAI1_DIVP_CONFIG(__PLLSAI1P__) \ + MODIFY_REG(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1PDIV, (__PLLSAI1P__) << RCC_PLLSAI1CFGR_PLLSAI1PDIV_Pos) + +#else + +#define __HAL_RCC_PLLSAI1_DIVP_CONFIG(__PLLSAI1P__) \ + MODIFY_REG(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1P, ((__PLLSAI1P__) >> 4U) << RCC_PLLSAI1CFGR_PLLSAI1P_Pos) + +#endif /* RCC_PLLSAI1P_DIV_2_31_SUPPORT */ + +/** @brief Macro to configure the PLLSAI1 clock division factor Q. + * + * @note This function must be used only when the PLLSAI1 is disabled. + * @note PLLSAI1 clock source is common with the main PLL (configured through + * __HAL_RCC_PLL_CONFIG() macro) + * + * @param __PLLSAI1Q__ specifies the division factor for USB/RNG/SDMMC1 clock. + * This parameter must be in the range (2, 4, 6 or 8). + * Use to set USB/RNG/SDMMC1 clock frequency = f(PLLSAI1) / PLLSAI1Q + * + * @retval None + */ +#define __HAL_RCC_PLLSAI1_DIVQ_CONFIG(__PLLSAI1Q__) \ + MODIFY_REG(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1Q, (((__PLLSAI1Q__) >> 1U) - 1U) << RCC_PLLSAI1CFGR_PLLSAI1Q_Pos) + +/** @brief Macro to configure the PLLSAI1 clock division factor R. + * + * @note This function must be used only when the PLLSAI1 is disabled. + * @note PLLSAI1 clock source is common with the main PLL (configured through + * __HAL_RCC_PLL_CONFIG() macro) + * + * @param __PLLSAI1R__ specifies the division factor for ADC clock. + * This parameter must be in the range (2, 4, 6 or 8) + * Use to set ADC clock frequency = f(PLLSAI1) / PLLSAI1R + * + * @retval None + */ +#define __HAL_RCC_PLLSAI1_DIVR_CONFIG(__PLLSAI1R__) \ + MODIFY_REG(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1R, (((__PLLSAI1R__) >> 1U) - 1U) << RCC_PLLSAI1CFGR_PLLSAI1R_Pos) + +/** + * @brief Macros to enable or disable the PLLSAI1. + * @note The PLLSAI1 is disabled by hardware when entering STOP and STANDBY modes. + * @retval None + */ + +#define __HAL_RCC_PLLSAI1_ENABLE() SET_BIT(RCC->CR, RCC_CR_PLLSAI1ON) + +#define __HAL_RCC_PLLSAI1_DISABLE() CLEAR_BIT(RCC->CR, RCC_CR_PLLSAI1ON) + +/** + * @brief Macros to enable or disable each clock output (PLLSAI1_SAI1, PLLSAI1_USB2 and PLLSAI1_ADC1). + * @note Enabling and disabling those clocks can be done without the need to stop the PLL. + * This is mainly used to save Power. + * @param __PLLSAI1_CLOCKOUT__ specifies the PLLSAI1 clock to be output. + * This parameter can be one or a combination of the following values: + * @arg @ref RCC_PLLSAI1_SAI1CLK This clock is used to generate an accurate clock to achieve + * high-quality audio performance on SAI interface in case. + * @arg @ref RCC_PLLSAI1_48M2CLK This clock is used to generate the clock for the USB OTG FS (48 MHz), + * the random number generator (<=48 MHz) and the SDIO (<= 48 MHz). + * @arg @ref RCC_PLLSAI1_ADC1CLK Clock used to clock ADC peripheral. + * @retval None + */ + +#define __HAL_RCC_PLLSAI1CLKOUT_ENABLE(__PLLSAI1_CLOCKOUT__) SET_BIT(RCC->PLLSAI1CFGR, (__PLLSAI1_CLOCKOUT__)) + +#define __HAL_RCC_PLLSAI1CLKOUT_DISABLE(__PLLSAI1_CLOCKOUT__) CLEAR_BIT(RCC->PLLSAI1CFGR, (__PLLSAI1_CLOCKOUT__)) + +/** + * @brief Macro to get clock output enable status (PLLSAI1_SAI1, PLLSAI1_USB2 and PLLSAI1_ADC1). + * @param __PLLSAI1_CLOCKOUT__ specifies the PLLSAI1 clock to be output. + * This parameter can be one of the following values: + * @arg @ref RCC_PLLSAI1_SAI1CLK This clock is used to generate an accurate clock to achieve + * high-quality audio performance on SAI interface in case. + * @arg @ref RCC_PLLSAI1_48M2CLK This clock is used to generate the clock for the USB OTG FS (48 MHz), + * the random number generator (<=48 MHz) and the SDIO (<= 48 MHz). + * @arg @ref RCC_PLLSAI1_ADC1CLK Clock used to clock ADC peripheral. + * @retval SET / RESET + */ +#define __HAL_RCC_GET_PLLSAI1CLKOUT_CONFIG(__PLLSAI1_CLOCKOUT__) READ_BIT(RCC->PLLSAI1CFGR, (__PLLSAI1_CLOCKOUT__)) + +#endif /* RCC_PLLSAI1_SUPPORT */ + +#if defined(RCC_PLLSAI2_SUPPORT) + +/** + * @brief Macro to configure the PLLSAI2 clock multiplication and division factors. + * + * @note This function must be used only when the PLLSAI2 is disabled. + * @note PLLSAI2 clock source is common with the main PLL (configured through + * __HAL_RCC_PLL_CONFIG() macro) + * + @if STM32L4S9xx + * @param __PLLSAI2M__ specifies the division factor of PLLSAI2 input clock. + * This parameter must be a number between Min_Data = 1 and Max_Data = 16. + * + @endif + * @param __PLLSAI2N__ specifies the multiplication factor for PLLSAI2 VCO output clock. + * This parameter must be a number between 8 and 86. + * @note You have to set the PLLSAI2N parameter correctly to ensure that the VCO + * output frequency is between 64 and 344 MHz. + * + * @param __PLLSAI2P__ specifies the division factor for SAI clock. + * This parameter must be a number in the range (7 or 17) for STM32L47xxx/L48xxx + * else (2 to 31). + * SAI2 clock frequency = f(PLLSAI2) / PLLSAI2P + * + @if STM32L4S9xx + * @param __PLLSAI2Q__ specifies the division factor for DSI clock. + * This parameter must be in the range (2, 4, 6 or 8). + * DSI clock frequency = f(PLLSAI2) / PLLSAI2Q + * + @endif + * @param __PLLSAI2R__ specifies the division factor for SAR ADC clock. + * This parameter must be in the range (2, 4, 6 or 8). + * + * @retval None + */ + +#if defined(RCC_PLLSAI2M_DIV_1_16_SUPPORT) + +# if defined(RCC_PLLSAI2P_DIV_2_31_SUPPORT) && defined(RCC_PLLSAI2Q_DIV_SUPPORT) + +#define __HAL_RCC_PLLSAI2_CONFIG(__PLLSAI2M__, __PLLSAI2N__, __PLLSAI2P__, __PLLSAI2Q__, __PLLSAI2R__) \ + MODIFY_REG(RCC->PLLSAI2CFGR, \ + (RCC_PLLSAI2CFGR_PLLSAI2M | RCC_PLLSAI2CFGR_PLLSAI2N | RCC_PLLSAI2CFGR_PLLSAI2P | \ + RCC_PLLSAI2CFGR_PLLSAI2Q | RCC_PLLSAI2CFGR_PLLSAI2R | RCC_PLLSAI2CFGR_PLLSAI2PDIV), \ + ((((__PLLSAI2M__) - 1U) << RCC_PLLSAI2CFGR_PLLSAI2M_Pos) | \ + ((__PLLSAI2N__) << RCC_PLLSAI2CFGR_PLLSAI2N_Pos) | \ + ((((__PLLSAI2Q__) >> 1U) - 1U) << RCC_PLLSAI2CFGR_PLLSAI2Q_Pos) | \ + ((((__PLLSAI2R__) >> 1U) - 1U) << RCC_PLLSAI2CFGR_PLLSAI2R_Pos) | \ + ((uint32_t)(__PLLSAI2P__) << RCC_PLLSAI2CFGR_PLLSAI2PDIV_Pos))) + +# elif defined(RCC_PLLSAI2P_DIV_2_31_SUPPORT) + +#define __HAL_RCC_PLLSAI2_CONFIG(__PLLSAI2M__, __PLLSAI2N__, __PLLSAI2P__, __PLLSAI2R__) \ + MODIFY_REG(RCC->PLLSAI2CFGR, \ + (RCC_PLLSAI2CFGR_PLLSAI2M | RCC_PLLSAI2CFGR_PLLSAI2N | RCC_PLLSAI2CFGR_PLLSAI2P | \ + RCC_PLLSAI2CFGR_PLLSAI2R | RCC_PLLSAI2CFGR_PLLSAI2PDIV), \ + ((((__PLLSAI2M__) - 1U) << RCC_PLLSAI2CFGR_PLLSAI2M_Pos) | \ + ((__PLLSAI2N__) << RCC_PLLSAI2CFGR_PLLSAI2N_Pos) | \ + ((((__PLLSAI2R__) >> 1U) - 1U) << RCC_PLLSAI2CFGR_PLLSAI2R_Pos) | \ + ((uint32_t)(__PLLSAI2P__) << RCC_PLLSAI2CFGR_PLLSAI2PDIV_Pos))) + +# else + +#define __HAL_RCC_PLLSAI2_CONFIG(__PLLSAI2M__, __PLLSAI2N__, __PLLSAI2P__, __PLLSAI2R__) \ + MODIFY_REG(RCC->PLLSAI2CFGR, \ + (RCC_PLLSAI2CFGR_PLLSAI2M | RCC_PLLSAI2CFGR_PLLSAI2N | RCC_PLLSAI2CFGR_PLLSAI2P | \ + RCC_PLLSAI2CFGR_PLLSAI2R), \ + ((((__PLLSAI2M__) - 1U) << RCC_PLLSAI2CFGR_PLLSAI2M_Pos) | \ + ((__PLLSAI2N__) << RCC_PLLSAI2CFGR_PLLSAI2N_Pos) | \ + ((((__PLLSAI2R__) >> 1U) - 1U) << RCC_PLLSAI2CFGR_PLLSAI2R_Pos) | \ + (((__PLLSAI2P__) >> 4U) << RCC_PLLSAI2CFGR_PLLSAI2P_Pos))) + +# endif /* RCC_PLLSAI2P_DIV_2_31_SUPPORT && RCC_PLLSAI2Q_DIV_SUPPORT */ + +#else + +# if defined(RCC_PLLSAI2P_DIV_2_31_SUPPORT) && defined(RCC_PLLSAI2Q_DIV_SUPPORT) + +#define __HAL_RCC_PLLSAI2_CONFIG(__PLLSAI2N__, __PLLSAI2P__, __PLLSAI2Q__, __PLLSAI2R__) \ + MODIFY_REG(RCC->PLLSAI2CFGR, \ + (RCC_PLLSAI2CFGR_PLLSAI2N | RCC_PLLSAI2CFGR_PLLSAI2P | \ + RCC_PLLSAI2CFGR_PLLSAI2Q | RCC_PLLSAI2CFGR_PLLSAI2R | RCC_PLLSAI2CFGR_PLLSAI2PDIV), \ + (((__PLLSAI2N__) << RCC_PLLSAI2CFGR_PLLSAI2N_Pos) | \ + ((((__PLLSAI2Q__) >> 1U) - 1U) << RCC_PLLSAI2CFGR_PLLSAI2Q_Pos) | \ + ((((__PLLSAI2R__) >> 1U) - 1U) << RCC_PLLSAI2CFGR_PLLSAI2R_Pos) | \ + ((uint32_t)(__PLLSAI2P__) << RCC_PLLSAI2CFGR_PLLSAI2PDIV_Pos))) + +# elif defined(RCC_PLLSAI2P_DIV_2_31_SUPPORT) + +#define __HAL_RCC_PLLSAI2_CONFIG(__PLLSAI2N__, __PLLSAI2P__, __PLLSAI2R__) \ + MODIFY_REG(RCC->PLLSAI2CFGR, \ + (RCC_PLLSAI2CFGR_PLLSAI2N | RCC_PLLSAI2CFGR_PLLSAI2P | \ + RCC_PLLSAI2CFGR_PLLSAI2R | RCC_PLLSAI2CFGR_PLLSAI2PDIV), \ + (((__PLLSAI2N__) << RCC_PLLSAI2CFGR_PLLSAI2N_Pos) | \ + ((((__PLLSAI2R__) >> 1U) - 1U) << RCC_PLLSAI2CFGR_PLLSAI2R_Pos) | \ + ((uint32_t)(__PLLSAI2P__) << RCC_PLLSAI2CFGR_PLLSAI2PDIV_Pos))) + +# else + +#define __HAL_RCC_PLLSAI2_CONFIG(__PLLSAI2N__, __PLLSAI2P__, __PLLSAI2R__) \ + MODIFY_REG(RCC->PLLSAI2CFGR, \ + (RCC_PLLSAI2CFGR_PLLSAI2N | RCC_PLLSAI2CFGR_PLLSAI2P | \ + RCC_PLLSAI2CFGR_PLLSAI2R), \ + (((__PLLSAI2N__) << RCC_PLLSAI2CFGR_PLLSAI2N_Pos) | \ + ((((__PLLSAI2R__) >> 1U) - 1U) << RCC_PLLSAI2CFGR_PLLSAI2R_Pos) | \ + (((__PLLSAI2P__) >> 4U) << RCC_PLLSAI2CFGR_PLLSAI2P_Pos))) + +# endif /* RCC_PLLSAI2P_DIV_2_31_SUPPORT && RCC_PLLSAI2Q_DIV_SUPPORT */ + +#endif /* RCC_PLLSAI2M_DIV_1_16_SUPPORT */ + + +/** + * @brief Macro to configure the PLLSAI2 clock multiplication factor N. + * + * @note This function must be used only when the PLLSAI2 is disabled. + * @note PLLSAI2 clock source is common with the main PLL (configured through + * __HAL_RCC_PLL_CONFIG() macro) + * + * @param __PLLSAI2N__ specifies the multiplication factor for PLLSAI2 VCO output clock. + * This parameter must be a number between 8 and 86. + * @note You have to set the PLLSAI2N parameter correctly to ensure that the VCO + * output frequency is between 64 and 344 MHz. + * PLLSAI1 clock frequency = f(PLLSAI1) multiplied by PLLSAI2N + * + * @retval None + */ +#define __HAL_RCC_PLLSAI2_MULN_CONFIG(__PLLSAI2N__) \ + MODIFY_REG(RCC->PLLSAI2CFGR, RCC_PLLSAI2CFGR_PLLSAI2N, (__PLLSAI2N__) << RCC_PLLSAI2CFGR_PLLSAI2N_Pos) + +#if defined(RCC_PLLSAI2M_DIV_1_16_SUPPORT) + +/** @brief Macro to configure the PLLSAI2 input clock division factor M. + * + * @note This function must be used only when the PLLSAI2 is disabled. + * @note PLLSAI2 clock source is common with the main PLL (configured through + * __HAL_RCC_PLL_CONFIG() macro) + * + * @param __PLLSAI2M__ specifies the division factor for PLLSAI2 clock. + * This parameter must be a number between Min_Data = 1 and Max_Data = 16. + * + * @retval None + */ + +#define __HAL_RCC_PLLSAI2_DIVM_CONFIG(__PLLSAI2M__) \ + MODIFY_REG(RCC->PLLSAI2CFGR, RCC_PLLSAI2CFGR_PLLSAI2M, ((__PLLSAI2M__) - 1U) << RCC_PLLSAI2CFGR_PLLSAI2M_Pos) + +#endif /* RCC_PLLSAI2M_DIV_1_16_SUPPORT */ + +/** @brief Macro to configure the PLLSAI2 clock division factor P. + * + * @note This function must be used only when the PLLSAI2 is disabled. + * @note PLLSAI2 clock source is common with the main PLL (configured through + * __HAL_RCC_PLL_CONFIG() macro) + * + * @param __PLLSAI2P__ specifies the division factor. + * This parameter must be a number in the range (7 or 17). + * Use to set SAI2 clock frequency = f(PLLSAI2) / __PLLSAI2P__ + * + * @retval None + */ +#define __HAL_RCC_PLLSAI2_DIVP_CONFIG(__PLLSAI2P__) \ + MODIFY_REG(RCC->PLLSAI2CFGR, RCC_PLLSAI2CFGR_PLLSAI2P, ((__PLLSAI2P__) >> 4U) << RCC_PLLSAI2CFGR_PLLSAI2P_Pos) + +#if defined(RCC_PLLSAI2Q_DIV_SUPPORT) + +/** @brief Macro to configure the PLLSAI2 clock division factor Q. + * + * @note This function must be used only when the PLLSAI2 is disabled. + * @note PLLSAI2 clock source is common with the main PLL (configured through + * __HAL_RCC_PLL_CONFIG() macro) + * + * @param __PLLSAI2Q__ specifies the division factor for USB/RNG/SDMMC1 clock. + * This parameter must be in the range (2, 4, 6 or 8). + * Use to set USB/RNG/SDMMC1 clock frequency = f(PLLSAI2) / PLLSAI2Q + * + * @retval None + */ +#define __HAL_RCC_PLLSAI2_DIVQ_CONFIG(__PLLSAI2Q__) \ + MODIFY_REG(RCC->PLLSAI2CFGR, RCC_PLLSAI2CFGR_PLLSAI2Q, (((__PLLSAI2Q__) >> 1U) - 1U) << RCC_PLLSAI2CFGR_PLLSAI2Q_Pos) + +#endif /* RCC_PLLSAI2Q_DIV_SUPPORT */ + +/** @brief Macro to configure the PLLSAI2 clock division factor R. + * + * @note This function must be used only when the PLLSAI2 is disabled. + * @note PLLSAI2 clock source is common with the main PLL (configured through + * __HAL_RCC_PLL_CONFIG() macro) + * + * @param __PLLSAI2R__ specifies the division factor. + * This parameter must be in the range (2, 4, 6 or 8). + * Use to set ADC clock frequency = f(PLLSAI2) / __PLLSAI2R__ + * + * @retval None + */ +#define __HAL_RCC_PLLSAI2_DIVR_CONFIG(__PLLSAI2R__) \ + MODIFY_REG(RCC->PLLSAI2CFGR, RCC_PLLSAI2CFGR_PLLSAI2R, (((__PLLSAI2R__) >> 1U) - 1U) << RCC_PLLSAI2CFGR_PLLSAI2R_Pos) + +/** + * @brief Macros to enable or disable the PLLSAI2. + * @note The PLLSAI2 is disabled by hardware when entering STOP and STANDBY modes. + * @retval None + */ + +#define __HAL_RCC_PLLSAI2_ENABLE() SET_BIT(RCC->CR, RCC_CR_PLLSAI2ON) + +#define __HAL_RCC_PLLSAI2_DISABLE() CLEAR_BIT(RCC->CR, RCC_CR_PLLSAI2ON) + +/** + * @brief Macros to enable or disable each clock output (PLLSAI2_SAI2, PLLSAI2_ADC2 and RCC_PLLSAI2_DSICLK). + * @note Enabling and disabling those clocks can be done without the need to stop the PLL. + * This is mainly used to save Power. + * @param __PLLSAI2_CLOCKOUT__ specifies the PLLSAI2 clock to be output. + * This parameter can be one or a combination of the following values: + @if STM32L486xx + * @arg @ref RCC_PLLSAI2_SAI2CLK This clock is used to generate an accurate clock to achieve + * high-quality audio performance on SAI interface in case. + * @arg @ref RCC_PLLSAI2_ADC2CLK Clock used to clock ADC peripheral. + @endif + @if STM32L4A6xx + * @arg @ref RCC_PLLSAI2_SAI2CLK This clock is used to generate an accurate clock to achieve + * high-quality audio performance on SAI interface in case. + * @arg @ref RCC_PLLSAI2_ADC2CLK Clock used to clock ADC peripheral. + @endif + @if STM32L4S9xx + * @arg @ref RCC_PLLSAI2_SAI2CLK This clock is used to generate an accurate clock to achieve + * high-quality audio performance on SAI interface in case. + * @arg @ref RCC_PLLSAI2_DSICLK Clock used to clock DSI peripheral. + @endif + * @retval None + */ + +#define __HAL_RCC_PLLSAI2CLKOUT_ENABLE(__PLLSAI2_CLOCKOUT__) SET_BIT(RCC->PLLSAI2CFGR, (__PLLSAI2_CLOCKOUT__)) + +#define __HAL_RCC_PLLSAI2CLKOUT_DISABLE(__PLLSAI2_CLOCKOUT__) CLEAR_BIT(RCC->PLLSAI2CFGR, (__PLLSAI2_CLOCKOUT__)) + +/** + * @brief Macro to get clock output enable status (PLLSAI2_SAI2, PLLSAI2_ADC2 and RCC_PLLSAI2_DSICLK). + * @param __PLLSAI2_CLOCKOUT__ specifies the PLLSAI2 clock to be output. + * This parameter can be one of the following values: + @if STM32L486xx + * @arg @ref RCC_PLLSAI2_SAI2CLK This clock is used to generate an accurate clock to achieve + * high-quality audio performance on SAI interface in case. + * @arg @ref RCC_PLLSAI2_ADC2CLK Clock used to clock ADC peripheral. + @endif + @if STM32L4A6xx + * @arg @ref RCC_PLLSAI2_SAI2CLK This clock is used to generate an accurate clock to achieve + * high-quality audio performance on SAI interface in case. + * @arg @ref RCC_PLLSAI2_ADC2CLK Clock used to clock ADC peripheral. + @endif + @if STM32L4S9xx + * @arg @ref RCC_PLLSAI2_SAI2CLK This clock is used to generate an accurate clock to achieve + * high-quality audio performance on SAI interface in case. + * @arg @ref RCC_PLLSAI2_DSICLK Clock used to clock DSI peripheral. + @endif + * @retval SET / RESET + */ +#define __HAL_RCC_GET_PLLSAI2CLKOUT_CONFIG(__PLLSAI2_CLOCKOUT__) READ_BIT(RCC->PLLSAI2CFGR, (__PLLSAI2_CLOCKOUT__)) + +#endif /* RCC_PLLSAI2_SUPPORT */ + +#if defined(SAI1) + +/** + * @brief Macro to configure the SAI1 clock source. + * @param __SAI1_CLKSOURCE__ defines the SAI1 clock source. This clock is derived + * from the PLLSAI1, system PLL or external clock (through a dedicated pin). + * This parameter can be one of the following values: + * @arg @ref RCC_SAI1CLKSOURCE_PLLSAI1 SAI1 clock = PLLSAI1 "P" clock (PLLSAI1CLK) + @if STM32L486xx + * @arg @ref RCC_SAI1CLKSOURCE_PLLSAI2 SAI1 clock = PLLSAI2 "P" clock (PLLSAI2CLK) for devices with PLLSAI2 + @endif + * @arg @ref RCC_SAI1CLKSOURCE_PLL SAI1 clock = PLL "P" clock (PLLSAI3CLK if PLLSAI2 exists, else PLLSAI2CLK) + * @arg @ref RCC_SAI1CLKSOURCE_PIN SAI1 clock = External Clock (SAI1_EXTCLK) + @if STM32L4S9xx + * @arg @ref RCC_SAI1CLKSOURCE_HSI SAI1 clock = HSI16 + @endif + * + @if STM32L443xx + * @note HSI16 is automatically set as SAI1 clock source when PLL are disabled for devices without PLLSAI2. + @endif + * + * @retval None + */ +#if defined(STM32L4P5xx) || defined(STM32L4Q5xx) || defined(STM32L4R5xx) || defined(STM32L4R7xx) || defined(STM32L4R9xx) || defined(STM32L4S5xx) || defined(STM32L4S7xx) || defined(STM32L4S9xx) +#define __HAL_RCC_SAI1_CONFIG(__SAI1_CLKSOURCE__)\ + MODIFY_REG(RCC->CCIPR2, RCC_CCIPR2_SAI1SEL, (__SAI1_CLKSOURCE__)) +#else +#define __HAL_RCC_SAI1_CONFIG(__SAI1_CLKSOURCE__)\ + MODIFY_REG(RCC->CCIPR, RCC_CCIPR_SAI1SEL, (__SAI1_CLKSOURCE__)) +#endif /* STM32L4P5xx || STM32L4Q5xx || STM32L4R5xx || STM32L4R7xx || STM32L4R9xx || STM32L4S5xx || STM32L4S7xx || STM32L4S9xx */ + +/** @brief Macro to get the SAI1 clock source. + * @retval The clock source can be one of the following values: + * @arg @ref RCC_SAI1CLKSOURCE_PLLSAI1 SAI1 clock = PLLSAI1 "P" clock (PLLSAI1CLK) + @if STM32L486xx + * @arg @ref RCC_SAI1CLKSOURCE_PLLSAI2 SAI1 clock = PLLSAI2 "P" clock (PLLSAI2CLK) for devices with PLLSAI2 + @endif + * @arg @ref RCC_SAI1CLKSOURCE_PLL SAI1 clock = PLL "P" clock (PLLSAI3CLK if PLLSAI2 exists, else PLLSAI2CLK) + * @arg @ref RCC_SAI1CLKSOURCE_PIN SAI1 clock = External Clock (SAI1_EXTCLK) + * + * @note Despite returned values RCC_SAI1CLKSOURCE_PLLSAI1 or RCC_SAI1CLKSOURCE_PLL, HSI16 is automatically set as SAI1 + * clock source when PLLs are disabled for devices without PLLSAI2. + * + */ +#if defined(STM32L4P5xx) || defined(STM32L4Q5xx) || defined(STM32L4R5xx) || defined(STM32L4R7xx) || defined(STM32L4R9xx) || defined(STM32L4S5xx) || defined(STM32L4S7xx) || defined(STM32L4S9xx) +#define __HAL_RCC_GET_SAI1_SOURCE() (READ_BIT(RCC->CCIPR2, RCC_CCIPR2_SAI1SEL)) +#else +#define __HAL_RCC_GET_SAI1_SOURCE() (READ_BIT(RCC->CCIPR, RCC_CCIPR_SAI1SEL)) +#endif /* STM32L4P5xx || STM32L4Q5xx || STM32L4R5xx || STM32L4R7xx || STM32L4R9xx || STM32L4S5xx || STM32L4S7xx || STM32L4S9xx */ + +#endif /* SAI1 */ + +#if defined(SAI2) + +/** + * @brief Macro to configure the SAI2 clock source. + * @param __SAI2_CLKSOURCE__ defines the SAI2 clock source. This clock is derived + * from the PLLSAI2, system PLL or external clock (through a dedicated pin). + * This parameter can be one of the following values: + * @arg @ref RCC_SAI2CLKSOURCE_PLLSAI1 SAI2 clock = PLLSAI1 "P" clock (PLLSAI1CLK) + * @arg @ref RCC_SAI2CLKSOURCE_PLLSAI2 SAI2 clock = PLLSAI2 "P" clock (PLLSAI2CLK) + * @arg @ref RCC_SAI2CLKSOURCE_PLL SAI2 clock = PLL "P" clock (PLLSAI3CLK) + * @arg @ref RCC_SAI2CLKSOURCE_PIN SAI2 clock = External Clock (SAI2_EXTCLK) + @if STM32L4S9xx + * @arg @ref RCC_SAI2CLKSOURCE_HSI SAI2 clock = HSI16 + @endif + * + * @retval None + */ +#if defined(STM32L4P5xx) || defined(STM32L4Q5xx) || defined(STM32L4R5xx) || defined(STM32L4R7xx) || defined(STM32L4R9xx) || defined(STM32L4S5xx) || defined(STM32L4S7xx) || defined(STM32L4S9xx) +#define __HAL_RCC_SAI2_CONFIG(__SAI2_CLKSOURCE__ )\ + MODIFY_REG(RCC->CCIPR2, RCC_CCIPR2_SAI2SEL, (__SAI2_CLKSOURCE__)) +#else +#define __HAL_RCC_SAI2_CONFIG(__SAI2_CLKSOURCE__ )\ + MODIFY_REG(RCC->CCIPR, RCC_CCIPR_SAI2SEL, (__SAI2_CLKSOURCE__)) +#endif /* STM32L4P5xx || STM32L4Q5xx || STM32L4R5xx || STM32L4R7xx || STM32L4R9xx || STM32L4S5xx || STM32L4S7xx || STM32L4S9xx */ + +/** @brief Macro to get the SAI2 clock source. + * @retval The clock source can be one of the following values: + * @arg @ref RCC_SAI2CLKSOURCE_PLLSAI1 SAI2 clock = PLLSAI1 "P" clock (PLLSAI1CLK) + * @arg @ref RCC_SAI2CLKSOURCE_PLLSAI2 SAI2 clock = PLLSAI2 "P" clock (PLLSAI2CLK) + * @arg @ref RCC_SAI2CLKSOURCE_PLL SAI2 clock = PLL "P" clock (PLLSAI3CLK) + * @arg @ref RCC_SAI2CLKSOURCE_PIN SAI2 clock = External Clock (SAI2_EXTCLK) + */ +#if defined(STM32L4P5xx) || defined(STM32L4Q5xx) || defined(STM32L4R5xx) || defined(STM32L4R7xx) || defined(STM32L4R9xx) || defined(STM32L4S5xx) || defined(STM32L4S7xx) || defined(STM32L4S9xx) +#define __HAL_RCC_GET_SAI2_SOURCE() (READ_BIT(RCC->CCIPR2, RCC_CCIPR2_SAI2SEL)) +#else +#define __HAL_RCC_GET_SAI2_SOURCE() (READ_BIT(RCC->CCIPR, RCC_CCIPR_SAI2SEL)) +#endif /* STM32L4P5xx || STM32L4Q5xx || STM32L4R5xx || STM32L4R7xx || STM32L4R9xx || STM32L4S5xx || STM32L4S7xx || STM32L4S9xx */ + +#endif /* SAI2 */ + +/** @brief Macro to configure the I2C1 clock (I2C1CLK). + * + * @param __I2C1_CLKSOURCE__ specifies the I2C1 clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_I2C1CLKSOURCE_PCLK1 PCLK1 selected as I2C1 clock + * @arg @ref RCC_I2C1CLKSOURCE_HSI HSI selected as I2C1 clock + * @arg @ref RCC_I2C1CLKSOURCE_SYSCLK System Clock selected as I2C1 clock + * @retval None + */ +#define __HAL_RCC_I2C1_CONFIG(__I2C1_CLKSOURCE__) \ + MODIFY_REG(RCC->CCIPR, RCC_CCIPR_I2C1SEL, (__I2C1_CLKSOURCE__)) + +/** @brief Macro to get the I2C1 clock source. + * @retval The clock source can be one of the following values: + * @arg @ref RCC_I2C1CLKSOURCE_PCLK1 PCLK1 selected as I2C1 clock + * @arg @ref RCC_I2C1CLKSOURCE_HSI HSI selected as I2C1 clock + * @arg @ref RCC_I2C1CLKSOURCE_SYSCLK System Clock selected as I2C1 clock + */ +#define __HAL_RCC_GET_I2C1_SOURCE() (READ_BIT(RCC->CCIPR, RCC_CCIPR_I2C1SEL)) + +#if defined(I2C2) + +/** @brief Macro to configure the I2C2 clock (I2C2CLK). + * + * @param __I2C2_CLKSOURCE__ specifies the I2C2 clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_I2C2CLKSOURCE_PCLK1 PCLK1 selected as I2C2 clock + * @arg @ref RCC_I2C2CLKSOURCE_HSI HSI selected as I2C2 clock + * @arg @ref RCC_I2C2CLKSOURCE_SYSCLK System Clock selected as I2C2 clock + * @retval None + */ +#define __HAL_RCC_I2C2_CONFIG(__I2C2_CLKSOURCE__) \ + MODIFY_REG(RCC->CCIPR, RCC_CCIPR_I2C2SEL, (__I2C2_CLKSOURCE__)) + +/** @brief Macro to get the I2C2 clock source. + * @retval The clock source can be one of the following values: + * @arg @ref RCC_I2C2CLKSOURCE_PCLK1 PCLK1 selected as I2C2 clock + * @arg @ref RCC_I2C2CLKSOURCE_HSI HSI selected as I2C2 clock + * @arg @ref RCC_I2C2CLKSOURCE_SYSCLK System Clock selected as I2C2 clock + */ +#define __HAL_RCC_GET_I2C2_SOURCE() (READ_BIT(RCC->CCIPR, RCC_CCIPR_I2C2SEL)) + +#endif /* I2C2 */ + +/** @brief Macro to configure the I2C3 clock (I2C3CLK). + * + * @param __I2C3_CLKSOURCE__ specifies the I2C3 clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_I2C3CLKSOURCE_PCLK1 PCLK1 selected as I2C3 clock + * @arg @ref RCC_I2C3CLKSOURCE_HSI HSI selected as I2C3 clock + * @arg @ref RCC_I2C3CLKSOURCE_SYSCLK System Clock selected as I2C3 clock + * @retval None + */ +#define __HAL_RCC_I2C3_CONFIG(__I2C3_CLKSOURCE__) \ + MODIFY_REG(RCC->CCIPR, RCC_CCIPR_I2C3SEL, (__I2C3_CLKSOURCE__)) + +/** @brief Macro to get the I2C3 clock source. + * @retval The clock source can be one of the following values: + * @arg @ref RCC_I2C3CLKSOURCE_PCLK1 PCLK1 selected as I2C3 clock + * @arg @ref RCC_I2C3CLKSOURCE_HSI HSI selected as I2C3 clock + * @arg @ref RCC_I2C3CLKSOURCE_SYSCLK System Clock selected as I2C3 clock + */ +#define __HAL_RCC_GET_I2C3_SOURCE() (READ_BIT(RCC->CCIPR, RCC_CCIPR_I2C3SEL)) + +#if defined(I2C4) + +/** @brief Macro to configure the I2C4 clock (I2C4CLK). + * + * @param __I2C4_CLKSOURCE__ specifies the I2C4 clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_I2C4CLKSOURCE_PCLK1 PCLK1 selected as I2C4 clock + * @arg @ref RCC_I2C4CLKSOURCE_HSI HSI selected as I2C4 clock + * @arg @ref RCC_I2C4CLKSOURCE_SYSCLK System Clock selected as I2C4 clock + * @retval None + */ +#define __HAL_RCC_I2C4_CONFIG(__I2C4_CLKSOURCE__) \ + MODIFY_REG(RCC->CCIPR2, RCC_CCIPR2_I2C4SEL, (__I2C4_CLKSOURCE__)) + +/** @brief Macro to get the I2C4 clock source. + * @retval The clock source can be one of the following values: + * @arg @ref RCC_I2C4CLKSOURCE_PCLK1 PCLK1 selected as I2C4 clock + * @arg @ref RCC_I2C4CLKSOURCE_HSI HSI selected as I2C4 clock + * @arg @ref RCC_I2C4CLKSOURCE_SYSCLK System Clock selected as I2C4 clock + */ +#define __HAL_RCC_GET_I2C4_SOURCE() (READ_BIT(RCC->CCIPR2, RCC_CCIPR2_I2C4SEL)) + +#endif /* I2C4 */ + + +/** @brief Macro to configure the USART1 clock (USART1CLK). + * + * @param __USART1_CLKSOURCE__ specifies the USART1 clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_USART1CLKSOURCE_PCLK2 PCLK2 selected as USART1 clock + * @arg @ref RCC_USART1CLKSOURCE_HSI HSI selected as USART1 clock + * @arg @ref RCC_USART1CLKSOURCE_SYSCLK System Clock selected as USART1 clock + * @arg @ref RCC_USART1CLKSOURCE_LSE SE selected as USART1 clock + * @retval None + */ +#define __HAL_RCC_USART1_CONFIG(__USART1_CLKSOURCE__) \ + MODIFY_REG(RCC->CCIPR, RCC_CCIPR_USART1SEL, (__USART1_CLKSOURCE__)) + +/** @brief Macro to get the USART1 clock source. + * @retval The clock source can be one of the following values: + * @arg @ref RCC_USART1CLKSOURCE_PCLK2 PCLK2 selected as USART1 clock + * @arg @ref RCC_USART1CLKSOURCE_HSI HSI selected as USART1 clock + * @arg @ref RCC_USART1CLKSOURCE_SYSCLK System Clock selected as USART1 clock + * @arg @ref RCC_USART1CLKSOURCE_LSE LSE selected as USART1 clock + */ +#define __HAL_RCC_GET_USART1_SOURCE() (READ_BIT(RCC->CCIPR, RCC_CCIPR_USART1SEL)) + +/** @brief Macro to configure the USART2 clock (USART2CLK). + * + * @param __USART2_CLKSOURCE__ specifies the USART2 clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_USART2CLKSOURCE_PCLK1 PCLK1 selected as USART2 clock + * @arg @ref RCC_USART2CLKSOURCE_HSI HSI selected as USART2 clock + * @arg @ref RCC_USART2CLKSOURCE_SYSCLK System Clock selected as USART2 clock + * @arg @ref RCC_USART2CLKSOURCE_LSE LSE selected as USART2 clock + * @retval None + */ +#define __HAL_RCC_USART2_CONFIG(__USART2_CLKSOURCE__) \ + MODIFY_REG(RCC->CCIPR, RCC_CCIPR_USART2SEL, (__USART2_CLKSOURCE__)) + +/** @brief Macro to get the USART2 clock source. + * @retval The clock source can be one of the following values: + * @arg @ref RCC_USART2CLKSOURCE_PCLK1 PCLK1 selected as USART2 clock + * @arg @ref RCC_USART2CLKSOURCE_HSI HSI selected as USART2 clock + * @arg @ref RCC_USART2CLKSOURCE_SYSCLK System Clock selected as USART2 clock + * @arg @ref RCC_USART2CLKSOURCE_LSE LSE selected as USART2 clock + */ +#define __HAL_RCC_GET_USART2_SOURCE() (READ_BIT(RCC->CCIPR, RCC_CCIPR_USART2SEL)) + +#if defined(USART3) + +/** @brief Macro to configure the USART3 clock (USART3CLK). + * + * @param __USART3_CLKSOURCE__ specifies the USART3 clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_USART3CLKSOURCE_PCLK1 PCLK1 selected as USART3 clock + * @arg @ref RCC_USART3CLKSOURCE_HSI HSI selected as USART3 clock + * @arg @ref RCC_USART3CLKSOURCE_SYSCLK System Clock selected as USART3 clock + * @arg @ref RCC_USART3CLKSOURCE_LSE LSE selected as USART3 clock + * @retval None + */ +#define __HAL_RCC_USART3_CONFIG(__USART3_CLKSOURCE__) \ + MODIFY_REG(RCC->CCIPR, RCC_CCIPR_USART3SEL, (__USART3_CLKSOURCE__)) + +/** @brief Macro to get the USART3 clock source. + * @retval The clock source can be one of the following values: + * @arg @ref RCC_USART3CLKSOURCE_PCLK1 PCLK1 selected as USART3 clock + * @arg @ref RCC_USART3CLKSOURCE_HSI HSI selected as USART3 clock + * @arg @ref RCC_USART3CLKSOURCE_SYSCLK System Clock selected as USART3 clock + * @arg @ref RCC_USART3CLKSOURCE_LSE LSE selected as USART3 clock + */ +#define __HAL_RCC_GET_USART3_SOURCE() (READ_BIT(RCC->CCIPR, RCC_CCIPR_USART3SEL)) + +#endif /* USART3 */ + +#if defined(UART4) + +/** @brief Macro to configure the UART4 clock (UART4CLK). + * + * @param __UART4_CLKSOURCE__ specifies the UART4 clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_UART4CLKSOURCE_PCLK1 PCLK1 selected as UART4 clock + * @arg @ref RCC_UART4CLKSOURCE_HSI HSI selected as UART4 clock + * @arg @ref RCC_UART4CLKSOURCE_SYSCLK System Clock selected as UART4 clock + * @arg @ref RCC_UART4CLKSOURCE_LSE LSE selected as UART4 clock + * @retval None + */ +#define __HAL_RCC_UART4_CONFIG(__UART4_CLKSOURCE__) \ + MODIFY_REG(RCC->CCIPR, RCC_CCIPR_UART4SEL, (__UART4_CLKSOURCE__)) + +/** @brief Macro to get the UART4 clock source. + * @retval The clock source can be one of the following values: + * @arg @ref RCC_UART4CLKSOURCE_PCLK1 PCLK1 selected as UART4 clock + * @arg @ref RCC_UART4CLKSOURCE_HSI HSI selected as UART4 clock + * @arg @ref RCC_UART4CLKSOURCE_SYSCLK System Clock selected as UART4 clock + * @arg @ref RCC_UART4CLKSOURCE_LSE LSE selected as UART4 clock + */ +#define __HAL_RCC_GET_UART4_SOURCE() (READ_BIT(RCC->CCIPR, RCC_CCIPR_UART4SEL)) + +#endif /* UART4 */ + +#if defined(UART5) + +/** @brief Macro to configure the UART5 clock (UART5CLK). + * + * @param __UART5_CLKSOURCE__ specifies the UART5 clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_UART5CLKSOURCE_PCLK1 PCLK1 selected as UART5 clock + * @arg @ref RCC_UART5CLKSOURCE_HSI HSI selected as UART5 clock + * @arg @ref RCC_UART5CLKSOURCE_SYSCLK System Clock selected as UART5 clock + * @arg @ref RCC_UART5CLKSOURCE_LSE LSE selected as UART5 clock + * @retval None + */ +#define __HAL_RCC_UART5_CONFIG(__UART5_CLKSOURCE__) \ + MODIFY_REG(RCC->CCIPR, RCC_CCIPR_UART5SEL, (__UART5_CLKSOURCE__)) + +/** @brief Macro to get the UART5 clock source. + * @retval The clock source can be one of the following values: + * @arg @ref RCC_UART5CLKSOURCE_PCLK1 PCLK1 selected as UART5 clock + * @arg @ref RCC_UART5CLKSOURCE_HSI HSI selected as UART5 clock + * @arg @ref RCC_UART5CLKSOURCE_SYSCLK System Clock selected as UART5 clock + * @arg @ref RCC_UART5CLKSOURCE_LSE LSE selected as UART5 clock + */ +#define __HAL_RCC_GET_UART5_SOURCE() (READ_BIT(RCC->CCIPR, RCC_CCIPR_UART5SEL)) + +#endif /* UART5 */ + +/** @brief Macro to configure the LPUART1 clock (LPUART1CLK). + * + * @param __LPUART1_CLKSOURCE__ specifies the LPUART1 clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_LPUART1CLKSOURCE_PCLK1 PCLK1 selected as LPUART1 clock + * @arg @ref RCC_LPUART1CLKSOURCE_HSI HSI selected as LPUART1 clock + * @arg @ref RCC_LPUART1CLKSOURCE_SYSCLK System Clock selected as LPUART1 clock + * @arg @ref RCC_LPUART1CLKSOURCE_LSE LSE selected as LPUART1 clock + * @retval None + */ +#define __HAL_RCC_LPUART1_CONFIG(__LPUART1_CLKSOURCE__) \ + MODIFY_REG(RCC->CCIPR, RCC_CCIPR_LPUART1SEL, (__LPUART1_CLKSOURCE__)) + +/** @brief Macro to get the LPUART1 clock source. + * @retval The clock source can be one of the following values: + * @arg @ref RCC_LPUART1CLKSOURCE_PCLK1 PCLK1 selected as LPUART1 clock + * @arg @ref RCC_LPUART1CLKSOURCE_HSI HSI selected as LPUART1 clock + * @arg @ref RCC_LPUART1CLKSOURCE_SYSCLK System Clock selected as LPUART1 clock + * @arg @ref RCC_LPUART1CLKSOURCE_LSE LSE selected as LPUART1 clock + */ +#define __HAL_RCC_GET_LPUART1_SOURCE() (READ_BIT(RCC->CCIPR, RCC_CCIPR_LPUART1SEL)) + +/** @brief Macro to configure the LPTIM1 clock (LPTIM1CLK). + * + * @param __LPTIM1_CLKSOURCE__ specifies the LPTIM1 clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_LPTIM1CLKSOURCE_PCLK1 PCLK1 selected as LPTIM1 clock + * @arg @ref RCC_LPTIM1CLKSOURCE_LSI HSI selected as LPTIM1 clock + * @arg @ref RCC_LPTIM1CLKSOURCE_HSI LSI selected as LPTIM1 clock + * @arg @ref RCC_LPTIM1CLKSOURCE_LSE LSE selected as LPTIM1 clock + * @retval None + */ +#define __HAL_RCC_LPTIM1_CONFIG(__LPTIM1_CLKSOURCE__) \ + MODIFY_REG(RCC->CCIPR, RCC_CCIPR_LPTIM1SEL, (__LPTIM1_CLKSOURCE__)) + +/** @brief Macro to get the LPTIM1 clock source. + * @retval The clock source can be one of the following values: + * @arg @ref RCC_LPTIM1CLKSOURCE_PCLK1 PCLK1 selected as LPUART1 clock + * @arg @ref RCC_LPTIM1CLKSOURCE_LSI HSI selected as LPUART1 clock + * @arg @ref RCC_LPTIM1CLKSOURCE_HSI System Clock selected as LPUART1 clock + * @arg @ref RCC_LPTIM1CLKSOURCE_LSE LSE selected as LPUART1 clock + */ +#define __HAL_RCC_GET_LPTIM1_SOURCE() (READ_BIT(RCC->CCIPR, RCC_CCIPR_LPTIM1SEL)) + +/** @brief Macro to configure the LPTIM2 clock (LPTIM2CLK). + * + * @param __LPTIM2_CLKSOURCE__ specifies the LPTIM2 clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_LPTIM2CLKSOURCE_PCLK1 PCLK1 selected as LPTIM2 clock + * @arg @ref RCC_LPTIM2CLKSOURCE_LSI HSI selected as LPTIM2 clock + * @arg @ref RCC_LPTIM2CLKSOURCE_HSI LSI selected as LPTIM2 clock + * @arg @ref RCC_LPTIM2CLKSOURCE_LSE LSE selected as LPTIM2 clock + * @retval None + */ +#define __HAL_RCC_LPTIM2_CONFIG(__LPTIM2_CLKSOURCE__) \ + MODIFY_REG(RCC->CCIPR, RCC_CCIPR_LPTIM2SEL, (__LPTIM2_CLKSOURCE__)) + +/** @brief Macro to get the LPTIM2 clock source. + * @retval The clock source can be one of the following values: + * @arg @ref RCC_LPTIM2CLKSOURCE_PCLK1 PCLK1 selected as LPUART1 clock + * @arg @ref RCC_LPTIM2CLKSOURCE_LSI HSI selected as LPUART1 clock + * @arg @ref RCC_LPTIM2CLKSOURCE_HSI System Clock selected as LPUART1 clock + * @arg @ref RCC_LPTIM2CLKSOURCE_LSE LSE selected as LPUART1 clock + */ +#define __HAL_RCC_GET_LPTIM2_SOURCE() (READ_BIT(RCC->CCIPR, RCC_CCIPR_LPTIM2SEL)) + +#if defined(SDMMC1) + +/** @brief Macro to configure the SDMMC1 clock. + * + @if STM32L486xx + * @note USB, RNG and SDMMC1 peripherals share the same 48MHz clock source. + @endif + * + @if STM32L443xx + * @note USB, RNG and SDMMC1 peripherals share the same 48MHz clock source. + @endif + * + * @param __SDMMC1_CLKSOURCE__ specifies the SDMMC1 clock source. + * This parameter can be one of the following values: + @if STM32L486xx + * @arg @ref RCC_SDMMC1CLKSOURCE_NONE No clock selected as SDMMC1 clock for devices without HSI48 + * @arg @ref RCC_SDMMC1CLKSOURCE_MSI MSI selected as SDMMC1 clock + * @arg @ref RCC_SDMMC1CLKSOURCE_PLLSAI1 PLLSAI1 "Q" Clock selected as SDMMC1 clock + @endif + @if STM32L443xx + * @arg @ref RCC_SDMMC1CLKSOURCE_HSI48 HSI48 selected as SDMMC1 clock for devices with HSI48 + * @arg @ref RCC_SDMMC1CLKSOURCE_MSI MSI selected as SDMMC1 clock + * @arg @ref RCC_SDMMC1CLKSOURCE_PLLSAI1 PLLSAI1 "Q" Clock selected as SDMMC1 clock + @endif + @if STM32L4S9xx + * @arg @ref RCC_SDMMC1CLKSOURCE_HSI48 HSI48 selected as SDMMC1 clock for devices with HSI48 + * @arg @ref RCC_SDMMC1CLKSOURCE_MSI MSI selected as SDMMC1 clock + * @arg @ref RCC_SDMMC1CLKSOURCE_PLLSAI1 PLLSAI1 "Q" Clock selected as SDMMC1 clock + * @arg @ref RCC_SDMMC1CLKSOURCE_PLLP PLL "P" Clock selected as SDMMC1 clock + @endif + * @arg @ref RCC_SDMMC1CLKSOURCE_PLL PLL "Q" Clock selected as SDMMC1 clock + * @retval None + */ +#if defined(RCC_CCIPR2_SDMMCSEL) +#define __HAL_RCC_SDMMC1_CONFIG(__SDMMC1_CLKSOURCE__) \ + do \ + { \ + if((__SDMMC1_CLKSOURCE__) == RCC_SDMMC1CLKSOURCE_PLLP) \ + { \ + SET_BIT(RCC->CCIPR2, RCC_CCIPR2_SDMMCSEL); \ + } \ + else \ + { \ + CLEAR_BIT(RCC->CCIPR2, RCC_CCIPR2_SDMMCSEL); \ + MODIFY_REG(RCC->CCIPR, RCC_CCIPR_CLK48SEL, (__SDMMC1_CLKSOURCE__)); \ + } \ + } while(0) +#else +#define __HAL_RCC_SDMMC1_CONFIG(__SDMMC1_CLKSOURCE__) \ + MODIFY_REG(RCC->CCIPR, RCC_CCIPR_CLK48SEL, (__SDMMC1_CLKSOURCE__)) +#endif /* RCC_CCIPR2_SDMMCSEL */ + +/** @brief Macro to get the SDMMC1 clock. + * @retval The clock source can be one of the following values: + @if STM32L486xx + * @arg @ref RCC_SDMMC1CLKSOURCE_NONE No clock selected as SDMMC1 clock for devices without HSI48 + * @arg @ref RCC_SDMMC1CLKSOURCE_MSI MSI selected as SDMMC1 clock + * @arg @ref RCC_SDMMC1CLKSOURCE_PLLSAI1 PLLSAI1 "Q" clock (PLL48M2CLK) selected as SDMMC1 clock + @endif + @if STM32L443xx + * @arg @ref RCC_SDMMC1CLKSOURCE_HSI48 HSI48 selected as SDMMC1 clock for devices with HSI48 + * @arg @ref RCC_SDMMC1CLKSOURCE_MSI MSI selected as SDMMC1 clock + * @arg @ref RCC_SDMMC1CLKSOURCE_PLLSAI1 PLLSAI1 "Q" clock (PLL48M2CLK) selected as SDMMC1 clock + @endif + @if STM32L4S9xx + * @arg @ref RCC_SDMMC1CLKSOURCE_HSI48 HSI48 selected as SDMMC1 clock for devices with HSI48 + * @arg @ref RCC_SDMMC1CLKSOURCE_MSI MSI selected as SDMMC1 clock + * @arg @ref RCC_SDMMC1CLKSOURCE_PLLSAI1 PLLSAI1 "Q" clock (PLL48M2CLK) selected as SDMMC1 clock + * @arg @ref RCC_SDMMC1CLKSOURCE_PLLP PLL "P" clock (PLLSAI3CLK) selected as SDMMC1 kernel clock + @endif + * @arg @ref RCC_SDMMC1CLKSOURCE_PLL PLL "Q" clock (PLL48M1CLK) selected as SDMMC1 clock + */ +#if defined(RCC_CCIPR2_SDMMCSEL) +#define __HAL_RCC_GET_SDMMC1_SOURCE() \ + ((READ_BIT(RCC->CCIPR2, RCC_CCIPR2_SDMMCSEL) != 0U) ? RCC_SDMMC1CLKSOURCE_PLLP : (READ_BIT(RCC->CCIPR, RCC_CCIPR_CLK48SEL))) +#else +#define __HAL_RCC_GET_SDMMC1_SOURCE() \ + (READ_BIT(RCC->CCIPR, RCC_CCIPR_CLK48SEL)) +#endif /* RCC_CCIPR2_SDMMCSEL */ + +#endif /* SDMMC1 */ + +/** @brief Macro to configure the RNG clock. + * + * @note USB, RNG and SDMMC1 peripherals share the same 48MHz clock source. + * + * @param __RNG_CLKSOURCE__ specifies the RNG clock source. + * This parameter can be one of the following values: + @if STM32L486xx + * @arg @ref RCC_RNGCLKSOURCE_NONE No clock selected as RNG clock for devices without HSI48 + @endif + @if STM32L443xx + * @arg @ref RCC_RNGCLKSOURCE_HSI48 HSI48 selected as RNG clock clock for devices with HSI48 + @endif + * @arg @ref RCC_RNGCLKSOURCE_MSI MSI selected as RNG clock + * @arg @ref RCC_RNGCLKSOURCE_PLLSAI1 PLLSAI1 Clock selected as RNG clock + * @arg @ref RCC_RNGCLKSOURCE_PLL PLL Clock selected as RNG clock + * @retval None + */ +#define __HAL_RCC_RNG_CONFIG(__RNG_CLKSOURCE__) \ + MODIFY_REG(RCC->CCIPR, RCC_CCIPR_CLK48SEL, (__RNG_CLKSOURCE__)) + +/** @brief Macro to get the RNG clock. + * @retval The clock source can be one of the following values: + @if STM32L486xx + * @arg @ref RCC_RNGCLKSOURCE_NONE No clock selected as RNG clock for devices without HSI48 + @endif + @if STM32L443xx + * @arg @ref RCC_RNGCLKSOURCE_HSI48 HSI48 selected as RNG clock clock for devices with HSI48 + @endif + * @arg @ref RCC_RNGCLKSOURCE_MSI MSI selected as RNG clock + * @arg @ref RCC_RNGCLKSOURCE_PLLSAI1 PLLSAI1 "Q" clock (PLL48M2CLK) selected as RNG clock + * @arg @ref RCC_RNGCLKSOURCE_PLL PLL "Q" clock (PLL48M1CLK) selected as RNG clock + */ +#define __HAL_RCC_GET_RNG_SOURCE() (READ_BIT(RCC->CCIPR, RCC_CCIPR_CLK48SEL)) + +#if defined(USB_OTG_FS) || defined(USB) + +/** @brief Macro to configure the USB clock (USBCLK). + * + * @note USB, RNG and SDMMC1 peripherals share the same 48MHz clock source. + * + * @param __USB_CLKSOURCE__ specifies the USB clock source. + * This parameter can be one of the following values: + @if STM32L486xx + * @arg @ref RCC_USBCLKSOURCE_NONE No clock selected as 48MHz clock for devices without HSI48 + @endif + @if STM32L443xx + * @arg @ref RCC_USBCLKSOURCE_HSI48 HSI48 selected as 48MHz clock for devices with HSI48 + @endif + * @arg @ref RCC_USBCLKSOURCE_MSI MSI selected as USB clock + * @arg @ref RCC_USBCLKSOURCE_PLLSAI1 PLLSAI1 "Q" clock (PLL48M2CLK) selected as USB clock + * @arg @ref RCC_USBCLKSOURCE_PLL PLL "Q" clock (PLL48M1CLK) selected as USB clock + * @retval None + */ +#define __HAL_RCC_USB_CONFIG(__USB_CLKSOURCE__) \ + MODIFY_REG(RCC->CCIPR, RCC_CCIPR_CLK48SEL, (__USB_CLKSOURCE__)) + +/** @brief Macro to get the USB clock source. + * @retval The clock source can be one of the following values: + @if STM32L486xx + * @arg @ref RCC_USBCLKSOURCE_NONE No clock selected as 48MHz clock for devices without HSI48 + @endif + @if STM32L443xx + * @arg @ref RCC_USBCLKSOURCE_HSI48 HSI48 selected as 48MHz clock for devices with HSI48 + @endif + * @arg @ref RCC_USBCLKSOURCE_MSI MSI selected as USB clock + * @arg @ref RCC_USBCLKSOURCE_PLLSAI1 PLLSAI1 "Q" clock (PLL48M2CLK) selected as USB clock + * @arg @ref RCC_USBCLKSOURCE_PLL PLL "Q" clock (PLL48M1CLK) selected as USB clock + */ +#define __HAL_RCC_GET_USB_SOURCE() (READ_BIT(RCC->CCIPR, RCC_CCIPR_CLK48SEL)) + +#endif /* USB_OTG_FS || USB */ + +#if defined(RCC_CCIPR_ADCSEL) + +/** @brief Macro to configure the ADC interface clock. + * @param __ADC_CLKSOURCE__ specifies the ADC digital interface clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_ADCCLKSOURCE_NONE No clock selected as ADC clock + * @arg @ref RCC_ADCCLKSOURCE_PLLSAI1 PLLSAI1 Clock selected as ADC clock + @if STM32L486xx + * @arg @ref RCC_ADCCLKSOURCE_PLLSAI2 PLLSAI2 Clock selected as ADC clock for STM32L47x/STM32L48x/STM32L49x/STM32L4Ax devices + @endif + * @arg @ref RCC_ADCCLKSOURCE_SYSCLK System Clock selected as ADC clock + * @retval None + */ +#define __HAL_RCC_ADC_CONFIG(__ADC_CLKSOURCE__) \ + MODIFY_REG(RCC->CCIPR, RCC_CCIPR_ADCSEL, (__ADC_CLKSOURCE__)) + +/** @brief Macro to get the ADC clock source. + * @retval The clock source can be one of the following values: + * @arg @ref RCC_ADCCLKSOURCE_NONE No clock selected as ADC clock + * @arg @ref RCC_ADCCLKSOURCE_PLLSAI1 PLLSAI1 Clock selected as ADC clock + @if STM32L486xx + * @arg @ref RCC_ADCCLKSOURCE_PLLSAI2 PLLSAI2 Clock selected as ADC clock for STM32L47x/STM32L48x/STM32L49x/STM32L4Ax devices + @endif + * @arg @ref RCC_ADCCLKSOURCE_SYSCLK System Clock selected as ADC clock + */ +#define __HAL_RCC_GET_ADC_SOURCE() (READ_BIT(RCC->CCIPR, RCC_CCIPR_ADCSEL)) +#else + +/** @brief Macro to get the ADC clock source. + * @retval The clock source can be one of the following values: + * @arg @ref RCC_ADCCLKSOURCE_NONE No clock selected as ADC clock + * @arg @ref RCC_ADCCLKSOURCE_SYSCLK System Clock selected as ADC clock + */ +#define __HAL_RCC_GET_ADC_SOURCE() ((__HAL_RCC_ADC_IS_CLK_ENABLED() != 0U) ? RCC_ADCCLKSOURCE_SYSCLK : RCC_ADCCLKSOURCE_NONE) + +#endif /* RCC_CCIPR_ADCSEL */ + +#if defined(SWPMI1) + +/** @brief Macro to configure the SWPMI1 clock. + * @param __SWPMI1_CLKSOURCE__ specifies the SWPMI1 clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_SWPMI1CLKSOURCE_PCLK1 PCLK1 Clock selected as SWPMI1 clock + * @arg @ref RCC_SWPMI1CLKSOURCE_HSI HSI Clock selected as SWPMI1 clock + * @retval None + */ +#define __HAL_RCC_SWPMI1_CONFIG(__SWPMI1_CLKSOURCE__) \ + MODIFY_REG(RCC->CCIPR, RCC_CCIPR_SWPMI1SEL, (__SWPMI1_CLKSOURCE__)) + +/** @brief Macro to get the SWPMI1 clock source. + * @retval The clock source can be one of the following values: + * @arg @ref RCC_SWPMI1CLKSOURCE_PCLK1 PCLK1 Clock selected as SWPMI1 clock + * @arg @ref RCC_SWPMI1CLKSOURCE_HSI HSI Clock selected as SWPMI1 clock + */ +#define __HAL_RCC_GET_SWPMI1_SOURCE() (READ_BIT(RCC->CCIPR, RCC_CCIPR_SWPMI1SEL)) + +#endif /* SWPMI1 */ + +#if defined(DFSDM1_Filter0) +/** @brief Macro to configure the DFSDM1 clock. + * @param __DFSDM1_CLKSOURCE__ specifies the DFSDM1 clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_DFSDM1CLKSOURCE_PCLK2 PCLK2 Clock selected as DFSDM1 clock + * @arg @ref RCC_DFSDM1CLKSOURCE_SYSCLK System Clock selected as DFSDM1 clock + * @retval None + */ +#if defined(STM32L4P5xx) || defined(STM32L4Q5xx) || defined(STM32L4R5xx) || defined(STM32L4R7xx) || defined(STM32L4R9xx) || defined(STM32L4S5xx) || defined(STM32L4S7xx) || defined(STM32L4S9xx) +#define __HAL_RCC_DFSDM1_CONFIG(__DFSDM1_CLKSOURCE__) \ + MODIFY_REG(RCC->CCIPR2, RCC_CCIPR2_DFSDM1SEL, (__DFSDM1_CLKSOURCE__)) +#else +#define __HAL_RCC_DFSDM1_CONFIG(__DFSDM1_CLKSOURCE__) \ + MODIFY_REG(RCC->CCIPR, RCC_CCIPR_DFSDM1SEL, (__DFSDM1_CLKSOURCE__)) +#endif /* STM32L4P5xx || STM32L4Q5xx || STM32L4R5xx || STM32L4R7xx || STM32L4R9xx || STM32L4S5xx || STM32L4S7xx || STM32L4S9xx */ + +/** @brief Macro to get the DFSDM1 clock source. + * @retval The clock source can be one of the following values: + * @arg @ref RCC_DFSDM1CLKSOURCE_PCLK2 PCLK2 Clock selected as DFSDM1 clock + * @arg @ref RCC_DFSDM1CLKSOURCE_SYSCLK System Clock selected as DFSDM1 clock + */ +#if defined(STM32L4P5xx) || defined(STM32L4Q5xx) || defined(STM32L4R5xx) || defined(STM32L4R7xx) || defined(STM32L4R9xx) || defined(STM32L4S5xx) || defined(STM32L4S7xx) || defined(STM32L4S9xx) +#define __HAL_RCC_GET_DFSDM1_SOURCE() (READ_BIT(RCC->CCIPR2, RCC_CCIPR2_DFSDM1SEL)) +#else +#define __HAL_RCC_GET_DFSDM1_SOURCE() (READ_BIT(RCC->CCIPR, RCC_CCIPR_DFSDM1SEL)) +#endif /* STM32L4P5xx || STM32L4Q5xx || STM32L4R5xx || STM32L4R7xx || STM32L4R9xx || STM32L4S5xx || STM32L4S7xx || STM32L4S9xx */ + +#if defined(STM32L4P5xx) || defined(STM32L4Q5xx) || defined(STM32L4R5xx) || defined(STM32L4R7xx) || defined(STM32L4R9xx) || defined(STM32L4S5xx) || defined(STM32L4S7xx) || defined(STM32L4S9xx) + +/** @brief Macro to configure the DFSDM1 audio clock. + * @param __DFSDM1AUDIO_CLKSOURCE__ specifies the DFSDM1 audio clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_DFSDM1AUDIOCLKSOURCE_SAI1 SAI1 clock selected as DFSDM1 audio clock + * @arg @ref RCC_DFSDM1AUDIOCLKSOURCE_HSI HSI clock selected as DFSDM1 audio clock + * @arg @ref RCC_DFSDM1AUDIOCLKSOURCE_MSI MSI clock selected as DFSDM1 audio clock + * @retval None + */ +#define __HAL_RCC_DFSDM1AUDIO_CONFIG(__DFSDM1AUDIO_CLKSOURCE__) \ + MODIFY_REG(RCC->CCIPR2, RCC_CCIPR2_ADFSDM1SEL, (__DFSDM1AUDIO_CLKSOURCE__)) + +/** @brief Macro to get the DFSDM1 audio clock source. + * @retval The clock source can be one of the following values: + * @arg @ref RCC_DFSDM1AUDIOCLKSOURCE_SAI1 SAI1 clock selected as DFSDM1 audio clock + * @arg @ref RCC_DFSDM1AUDIOCLKSOURCE_HSI HSI clock selected as DFSDM1 audio clock + * @arg @ref RCC_DFSDM1AUDIOCLKSOURCE_MSI MSI clock selected as DFSDM1 audio clock + */ +#define __HAL_RCC_GET_DFSDM1AUDIO_SOURCE() (READ_BIT(RCC->CCIPR2, RCC_CCIPR2_ADFSDM1SEL)) + +#endif /* STM32L4P5xx || STM32L4Q5xx || STM32L4R5xx || STM32L4R7xx || STM32L4R9xx || STM32L4S5xx || STM32L4S7xx || STM32L4S9xx */ + +#endif /* DFSDM1_Filter0 */ + +#if defined(LTDC) + +/** @brief Macro to configure the LTDC clock. + * @param __LTDC_CLKSOURCE__ specifies the LTDC clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_LTDCCLKSOURCE_PLLSAI2_DIV2 PLLSAI2 divider R divided by 2 clock selected as LTDC clock + * @arg @ref RCC_LTDCCLKSOURCE_PLLSAI2_DIV4 PLLSAI2 divider R divided by 4 clock selected as LTDC clock + * @arg @ref RCC_LTDCCLKSOURCE_PLLSAI2_DIV8 PLLSAI2 divider R divided by 8 clock selected as LTDC clock + * @arg @ref RCC_LTDCCLKSOURCE_PLLSAI2_DIV16 PLLSAI2 divider R divided by 16 clock selected as LTDC clock + * @retval None + */ +#define __HAL_RCC_LTDC_CONFIG(__LTDC_CLKSOURCE__) \ + MODIFY_REG(RCC->CCIPR2, RCC_CCIPR2_PLLSAI2DIVR, (__LTDC_CLKSOURCE__)) + +/** @brief Macro to get the LTDC clock source. + * @retval The clock source can be one of the following values: + * @arg @ref RCC_LTDCCLKSOURCE_PLLSAI2_DIV2 PLLSAI2 divider R divided by 2 clock selected as LTDC clock + * @arg @ref RCC_LTDCCLKSOURCE_PLLSAI2_DIV4 PLLSAI2 divider R divided by 4 clock selected as LTDC clock + * @arg @ref RCC_LTDCCLKSOURCE_PLLSAI2_DIV8 PLLSAI2 divider R divided by 8 clock selected as LTDC clock + * @arg @ref RCC_LTDCCLKSOURCE_PLLSAI2_DIV16 PLLSAI2 divider R divided by 16 clock selected as LTDC clock + */ +#define __HAL_RCC_GET_LTDC_SOURCE() (READ_BIT(RCC->CCIPR2, RCC_CCIPR2_PLLSAI2DIVR)) + +#endif /* LTDC */ + +#if defined(DSI ) + +/** @brief Macro to configure the DSI clock. + * @param __DSI_CLKSOURCE__ specifies the DSI clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_DSICLKSOURCE_DSIPHY DSI-PHY clock selected as DSI clock + * @arg @ref RCC_DSICLKSOURCE_PLLSAI2 PLLSAI2 R divider clock selected as DSI clock + * @retval None + */ +#define __HAL_RCC_DSI_CONFIG(__DSI_CLKSOURCE__) \ + MODIFY_REG(RCC->CCIPR2, RCC_CCIPR2_DSISEL, (__DSI_CLKSOURCE__)) + +/** @brief Macro to get the DSI clock source. + * @retval The clock source can be one of the following values: + * @arg @ref RCC_DSICLKSOURCE_DSIPHY DSI-PHY clock selected as DSI clock + * @arg @ref RCC_DSICLKSOURCE_PLLSAI2 PLLSAI2 R divider clock selected as DSI clock + */ +#define __HAL_RCC_GET_DSI_SOURCE() (READ_BIT(RCC->CCIPR2, RCC_CCIPR2_DSISEL)) + +#endif /* DSI */ + +#if defined(OCTOSPI1) || defined(OCTOSPI2) + +/** @brief Macro to configure the OctoSPI clock. + * @param __OSPI_CLKSOURCE__ specifies the OctoSPI clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_OSPICLKSOURCE_SYSCLK System Clock selected as OctoSPI clock + * @arg @ref RCC_OSPICLKSOURCE_MSI MSI clock selected as OctoSPI clock + * @arg @ref RCC_OSPICLKSOURCE_PLL PLL Q divider clock selected as OctoSPI clock + * @retval None + */ +#define __HAL_RCC_OSPI_CONFIG(__OSPI_CLKSOURCE__) \ + MODIFY_REG(RCC->CCIPR2, RCC_CCIPR2_OSPISEL, (__OSPI_CLKSOURCE__)) + +/** @brief Macro to get the OctoSPI clock source. + * @retval The clock source can be one of the following values: + * @arg @ref RCC_OSPICLKSOURCE_SYSCLK System Clock selected as OctoSPI clock + * @arg @ref RCC_OSPICLKSOURCE_MSI MSI clock selected as OctoSPI clock + * @arg @ref RCC_OSPICLKSOURCE_PLL PLL Q divider clock selected as OctoSPI clock + */ +#define __HAL_RCC_GET_OSPI_SOURCE() (READ_BIT(RCC->CCIPR2, RCC_CCIPR2_OSPISEL)) + +#endif /* OCTOSPI1 || OCTOSPI2 */ + +/** @defgroup RCCEx_Flags_Interrupts_Management Flags Interrupts Management + * @brief macros to manage the specified RCC Flags and interrupts. + * @{ + */ +#if defined(RCC_PLLSAI1_SUPPORT) + +/** @brief Enable PLLSAI1RDY interrupt. + * @retval None + */ +#define __HAL_RCC_PLLSAI1_ENABLE_IT() SET_BIT(RCC->CIER, RCC_CIER_PLLSAI1RDYIE) + +/** @brief Disable PLLSAI1RDY interrupt. + * @retval None + */ +#define __HAL_RCC_PLLSAI1_DISABLE_IT() CLEAR_BIT(RCC->CIER, RCC_CIER_PLLSAI1RDYIE) + +/** @brief Clear the PLLSAI1RDY interrupt pending bit. + * @retval None + */ +#define __HAL_RCC_PLLSAI1_CLEAR_IT() WRITE_REG(RCC->CICR, RCC_CICR_PLLSAI1RDYC) + +/** @brief Check whether PLLSAI1RDY interrupt has occurred or not. + * @retval TRUE or FALSE. + */ +#define __HAL_RCC_PLLSAI1_GET_IT_SOURCE() (READ_BIT(RCC->CIFR, RCC_CIFR_PLLSAI1RDYF) == RCC_CIFR_PLLSAI1RDYF) + +/** @brief Check whether the PLLSAI1RDY flag is set or not. + * @retval TRUE or FALSE. + */ +#define __HAL_RCC_PLLSAI1_GET_FLAG() (READ_BIT(RCC->CR, RCC_CR_PLLSAI1RDY) == (RCC_CR_PLLSAI1RDY)) + +#endif /* RCC_PLLSAI1_SUPPORT */ + +#if defined(RCC_PLLSAI2_SUPPORT) + +/** @brief Enable PLLSAI2RDY interrupt. + * @retval None + */ +#define __HAL_RCC_PLLSAI2_ENABLE_IT() SET_BIT(RCC->CIER, RCC_CIER_PLLSAI2RDYIE) + +/** @brief Disable PLLSAI2RDY interrupt. + * @retval None + */ +#define __HAL_RCC_PLLSAI2_DISABLE_IT() CLEAR_BIT(RCC->CIER, RCC_CIER_PLLSAI2RDYIE) + +/** @brief Clear the PLLSAI2RDY interrupt pending bit. + * @retval None + */ +#define __HAL_RCC_PLLSAI2_CLEAR_IT() WRITE_REG(RCC->CICR, RCC_CICR_PLLSAI2RDYC) + +/** @brief Check whether the PLLSAI2RDY interrupt has occurred or not. + * @retval TRUE or FALSE. + */ +#define __HAL_RCC_PLLSAI2_GET_IT_SOURCE() (READ_BIT(RCC->CIFR, RCC_CIFR_PLLSAI2RDYF) == RCC_CIFR_PLLSAI2RDYF) + +/** @brief Check whether the PLLSAI2RDY flag is set or not. + * @retval TRUE or FALSE. + */ +#define __HAL_RCC_PLLSAI2_GET_FLAG() (READ_BIT(RCC->CR, RCC_CR_PLLSAI2RDY) == (RCC_CR_PLLSAI2RDY)) + +#endif /* RCC_PLLSAI2_SUPPORT */ + + +/** + * @brief Enable the RCC LSE CSS Extended Interrupt Line. + * @retval None + */ +#define __HAL_RCC_LSECSS_EXTI_ENABLE_IT() SET_BIT(EXTI->IMR1, RCC_EXTI_LINE_LSECSS) + +/** + * @brief Disable the RCC LSE CSS Extended Interrupt Line. + * @retval None + */ +#define __HAL_RCC_LSECSS_EXTI_DISABLE_IT() CLEAR_BIT(EXTI->IMR1, RCC_EXTI_LINE_LSECSS) + +/** + * @brief Enable the RCC LSE CSS Event Line. + * @retval None. + */ +#define __HAL_RCC_LSECSS_EXTI_ENABLE_EVENT() SET_BIT(EXTI->EMR1, RCC_EXTI_LINE_LSECSS) + +/** + * @brief Disable the RCC LSE CSS Event Line. + * @retval None. + */ +#define __HAL_RCC_LSECSS_EXTI_DISABLE_EVENT() CLEAR_BIT(EXTI->EMR1, RCC_EXTI_LINE_LSECSS) + + +/** + * @brief Enable the RCC LSE CSS Extended Interrupt Falling Trigger. + * @retval None. + */ +#define __HAL_RCC_LSECSS_EXTI_ENABLE_FALLING_EDGE() SET_BIT(EXTI->FTSR1, RCC_EXTI_LINE_LSECSS) + + +/** + * @brief Disable the RCC LSE CSS Extended Interrupt Falling Trigger. + * @retval None. + */ +#define __HAL_RCC_LSECSS_EXTI_DISABLE_FALLING_EDGE() CLEAR_BIT(EXTI->FTSR1, RCC_EXTI_LINE_LSECSS) + + +/** + * @brief Enable the RCC LSE CSS Extended Interrupt Rising Trigger. + * @retval None. + */ +#define __HAL_RCC_LSECSS_EXTI_ENABLE_RISING_EDGE() SET_BIT(EXTI->RTSR1, RCC_EXTI_LINE_LSECSS) + +/** + * @brief Disable the RCC LSE CSS Extended Interrupt Rising Trigger. + * @retval None. + */ +#define __HAL_RCC_LSECSS_EXTI_DISABLE_RISING_EDGE() CLEAR_BIT(EXTI->RTSR1, RCC_EXTI_LINE_LSECSS) + +/** + * @brief Enable the RCC LSE CSS Extended Interrupt Rising & Falling Trigger. + * @retval None. + */ +#define __HAL_RCC_LSECSS_EXTI_ENABLE_RISING_FALLING_EDGE() \ + do { \ + __HAL_RCC_LSECSS_EXTI_ENABLE_RISING_EDGE(); \ + __HAL_RCC_LSECSS_EXTI_ENABLE_FALLING_EDGE(); \ + } while(0) + +/** + * @brief Disable the RCC LSE CSS Extended Interrupt Rising & Falling Trigger. + * @retval None. + */ +#define __HAL_RCC_LSECSS_EXTI_DISABLE_RISING_FALLING_EDGE() \ + do { \ + __HAL_RCC_LSECSS_EXTI_DISABLE_RISING_EDGE(); \ + __HAL_RCC_LSECSS_EXTI_DISABLE_FALLING_EDGE(); \ + } while(0) + +/** + * @brief Check whether the specified RCC LSE CSS EXTI interrupt flag is set or not. + * @retval EXTI RCC LSE CSS Line Status. + */ +#define __HAL_RCC_LSECSS_EXTI_GET_FLAG() (READ_BIT(EXTI->PR1, RCC_EXTI_LINE_LSECSS) == RCC_EXTI_LINE_LSECSS) + +/** + * @brief Clear the RCC LSE CSS EXTI flag. + * @retval None. + */ +#define __HAL_RCC_LSECSS_EXTI_CLEAR_FLAG() WRITE_REG(EXTI->PR1, RCC_EXTI_LINE_LSECSS) + +/** + * @brief Generate a Software interrupt on the RCC LSE CSS EXTI line. + * @retval None. + */ +#define __HAL_RCC_LSECSS_EXTI_GENERATE_SWIT() SET_BIT(EXTI->SWIER1, RCC_EXTI_LINE_LSECSS) + + +#if defined(CRS) + +/** + * @brief Enable the specified CRS interrupts. + * @param __INTERRUPT__ specifies the CRS interrupt sources to be enabled. + * This parameter can be any combination of the following values: + * @arg @ref RCC_CRS_IT_SYNCOK SYNC event OK interrupt + * @arg @ref RCC_CRS_IT_SYNCWARN SYNC warning interrupt + * @arg @ref RCC_CRS_IT_ERR Synchronization or trimming error interrupt + * @arg @ref RCC_CRS_IT_ESYNC Expected SYNC interrupt + * @retval None + */ +#define __HAL_RCC_CRS_ENABLE_IT(__INTERRUPT__) SET_BIT(CRS->CR, (__INTERRUPT__)) + +/** + * @brief Disable the specified CRS interrupts. + * @param __INTERRUPT__ specifies the CRS interrupt sources to be disabled. + * This parameter can be any combination of the following values: + * @arg @ref RCC_CRS_IT_SYNCOK SYNC event OK interrupt + * @arg @ref RCC_CRS_IT_SYNCWARN SYNC warning interrupt + * @arg @ref RCC_CRS_IT_ERR Synchronization or trimming error interrupt + * @arg @ref RCC_CRS_IT_ESYNC Expected SYNC interrupt + * @retval None + */ +#define __HAL_RCC_CRS_DISABLE_IT(__INTERRUPT__) CLEAR_BIT(CRS->CR, (__INTERRUPT__)) + +/** @brief Check whether the CRS interrupt has occurred or not. + * @param __INTERRUPT__ specifies the CRS interrupt source to check. + * This parameter can be one of the following values: + * @arg @ref RCC_CRS_IT_SYNCOK SYNC event OK interrupt + * @arg @ref RCC_CRS_IT_SYNCWARN SYNC warning interrupt + * @arg @ref RCC_CRS_IT_ERR Synchronization or trimming error interrupt + * @arg @ref RCC_CRS_IT_ESYNC Expected SYNC interrupt + * @retval The new state of __INTERRUPT__ (SET or RESET). + */ +#define __HAL_RCC_CRS_GET_IT_SOURCE(__INTERRUPT__) ((READ_BIT(CRS->CR, (__INTERRUPT__)) != 0U) ? SET : RESET) + +/** @brief Clear the CRS interrupt pending bits + * @param __INTERRUPT__ specifies the interrupt pending bit to clear. + * This parameter can be any combination of the following values: + * @arg @ref RCC_CRS_IT_SYNCOK SYNC event OK interrupt + * @arg @ref RCC_CRS_IT_SYNCWARN SYNC warning interrupt + * @arg @ref RCC_CRS_IT_ERR Synchronization or trimming error interrupt + * @arg @ref RCC_CRS_IT_ESYNC Expected SYNC interrupt + * @arg @ref RCC_CRS_IT_TRIMOVF Trimming overflow or underflow interrupt + * @arg @ref RCC_CRS_IT_SYNCERR SYNC error interrupt + * @arg @ref RCC_CRS_IT_SYNCMISS SYNC missed interrupt + */ +/* CRS IT Error Mask */ +#define RCC_CRS_IT_ERROR_MASK (RCC_CRS_IT_TRIMOVF | RCC_CRS_IT_SYNCERR | RCC_CRS_IT_SYNCMISS) + +#define __HAL_RCC_CRS_CLEAR_IT(__INTERRUPT__) do { \ + if(((__INTERRUPT__) & RCC_CRS_IT_ERROR_MASK) != 0U) \ + { \ + WRITE_REG(CRS->ICR, CRS_ICR_ERRC | ((__INTERRUPT__) & ~RCC_CRS_IT_ERROR_MASK)); \ + } \ + else \ + { \ + WRITE_REG(CRS->ICR, (__INTERRUPT__)); \ + } \ + } while(0) + +/** + * @brief Check whether the specified CRS flag is set or not. + * @param __FLAG__ specifies the flag to check. + * This parameter can be one of the following values: + * @arg @ref RCC_CRS_FLAG_SYNCOK SYNC event OK + * @arg @ref RCC_CRS_FLAG_SYNCWARN SYNC warning + * @arg @ref RCC_CRS_FLAG_ERR Error + * @arg @ref RCC_CRS_FLAG_ESYNC Expected SYNC + * @arg @ref RCC_CRS_FLAG_TRIMOVF Trimming overflow or underflow + * @arg @ref RCC_CRS_FLAG_SYNCERR SYNC error + * @arg @ref RCC_CRS_FLAG_SYNCMISS SYNC missed + * @retval The new state of _FLAG_ (TRUE or FALSE). + */ +#define __HAL_RCC_CRS_GET_FLAG(__FLAG__) (READ_BIT(CRS->ISR, (__FLAG__)) == (__FLAG__)) + +/** + * @brief Clear the CRS specified FLAG. + * @param __FLAG__ specifies the flag to clear. + * This parameter can be one of the following values: + * @arg @ref RCC_CRS_FLAG_SYNCOK SYNC event OK + * @arg @ref RCC_CRS_FLAG_SYNCWARN SYNC warning + * @arg @ref RCC_CRS_FLAG_ERR Error + * @arg @ref RCC_CRS_FLAG_ESYNC Expected SYNC + * @arg @ref RCC_CRS_FLAG_TRIMOVF Trimming overflow or underflow + * @arg @ref RCC_CRS_FLAG_SYNCERR SYNC error + * @arg @ref RCC_CRS_FLAG_SYNCMISS SYNC missed + * @note RCC_CRS_FLAG_ERR clears RCC_CRS_FLAG_TRIMOVF, RCC_CRS_FLAG_SYNCERR, RCC_CRS_FLAG_SYNCMISS and consequently RCC_CRS_FLAG_ERR + * @retval None + */ + +/* CRS Flag Error Mask */ +#define RCC_CRS_FLAG_ERROR_MASK (RCC_CRS_FLAG_TRIMOVF | RCC_CRS_FLAG_SYNCERR | RCC_CRS_FLAG_SYNCMISS) + +#define __HAL_RCC_CRS_CLEAR_FLAG(__FLAG__) do { \ + if(((__FLAG__) & RCC_CRS_FLAG_ERROR_MASK) != 0U) \ + { \ + WRITE_REG(CRS->ICR, CRS_ICR_ERRC | ((__FLAG__) & ~RCC_CRS_FLAG_ERROR_MASK)); \ + } \ + else \ + { \ + WRITE_REG(CRS->ICR, (__FLAG__)); \ + } \ + } while(0) + +#endif /* CRS */ + +/** + * @} + */ + +#if defined(CRS) + +/** @defgroup RCCEx_CRS_Extended_Features RCCEx CRS Extended Features + * @{ + */ +/** + * @brief Enable the oscillator clock for frequency error counter. + * @note when the CEN bit is set the CRS_CFGR register becomes write-protected. + * @retval None + */ +#define __HAL_RCC_CRS_FREQ_ERROR_COUNTER_ENABLE() SET_BIT(CRS->CR, CRS_CR_CEN) + +/** + * @brief Disable the oscillator clock for frequency error counter. + * @retval None + */ +#define __HAL_RCC_CRS_FREQ_ERROR_COUNTER_DISABLE() CLEAR_BIT(CRS->CR, CRS_CR_CEN) + +/** + * @brief Enable the automatic hardware adjustment of TRIM bits. + * @note When the AUTOTRIMEN bit is set the CRS_CFGR register becomes write-protected. + * @retval None + */ +#define __HAL_RCC_CRS_AUTOMATIC_CALIB_ENABLE() SET_BIT(CRS->CR, CRS_CR_AUTOTRIMEN) + +/** + * @brief Enable or disable the automatic hardware adjustment of TRIM bits. + * @retval None + */ +#define __HAL_RCC_CRS_AUTOMATIC_CALIB_DISABLE() CLEAR_BIT(CRS->CR, CRS_CR_AUTOTRIMEN) + +/** + * @brief Macro to calculate reload value to be set in CRS register according to target and sync frequencies + * @note The RELOAD value should be selected according to the ratio between the target frequency and the frequency + * of the synchronization source after prescaling. It is then decreased by one in order to + * reach the expected synchronization on the zero value. The formula is the following: + * RELOAD = (fTARGET / fSYNC) -1 + * @param __FTARGET__ Target frequency (value in Hz) + * @param __FSYNC__ Synchronization signal frequency (value in Hz) + * @retval None + */ +#define __HAL_RCC_CRS_RELOADVALUE_CALCULATE(__FTARGET__, __FSYNC__) (((__FTARGET__) / (__FSYNC__)) - 1U) + +/** + * @} + */ + +#endif /* CRS */ + +#if defined(PSSI) + +/** @defgroup RCCEx_PSSI_Macros_Aliases RCCEx PSSI Macros Aliases + * @{ + */ + +#define __HAL_RCC_PSSI_CLK_ENABLE() __HAL_RCC_DCMI_CLK_ENABLE() + +#define __HAL_RCC_PSSI_CLK_DISABLE() __HAL_RCC_DCMI_CLK_DISABLE() + +#define __HAL_RCC_PSSI_IS_CLK_ENABLED() __HAL_RCC_DCMI_IS_CLK_ENABLED() + +#define __HAL_RCC_PSSI_IS_CLK_DISABLED() __HAL_RCC_DCMI_IS_CLK_DISABLED() + +#define __HAL_RCC_PSSI_FORCE_RESET() __HAL_RCC_DCMI_FORCE_RESET() + +#define __HAL_RCC_PSSI_RELEASE_RESET() __HAL_RCC_DCMI_RELEASE_RESET() + +#define __HAL_RCC_PSSI_CLK_SLEEP_ENABLE() __HAL_RCC_DCMI_CLK_SLEEP_ENABLE() + +#define __HAL_RCC_PSSI_CLK_SLEEP_DISABLE() __HAL_RCC_DCMI_CLK_SLEEP_DISABLE() + +#define __HAL_RCC_PSSI_IS_CLK_SLEEP_ENABLED() __HAL_RCC_DCMI_IS_CLK_SLEEP_ENABLED() + +#define __HAL_RCC_PSSI_IS_CLK_SLEEP_DISABLED() __HAL_RCC_DCMI_IS_CLK_SLEEP_DISABLED() + +/** + * @} + */ + +#endif /* PSSI */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup RCCEx_Exported_Functions + * @{ + */ + +/** @addtogroup RCCEx_Exported_Functions_Group1 + * @{ + */ + +HAL_StatusTypeDef HAL_RCCEx_PeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit); +void HAL_RCCEx_GetPeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit); +uint32_t HAL_RCCEx_GetPeriphCLKFreq(uint32_t PeriphClk); + +/** + * @} + */ + +/** @addtogroup RCCEx_Exported_Functions_Group2 + * @{ + */ +#if defined(RCC_PLLSAI1_SUPPORT) + +HAL_StatusTypeDef HAL_RCCEx_EnablePLLSAI1(RCC_PLLSAI1InitTypeDef *PLLSAI1Init); +HAL_StatusTypeDef HAL_RCCEx_DisablePLLSAI1(void); + +#endif /* RCC_PLLSAI1_SUPPORT */ + +#if defined(RCC_PLLSAI2_SUPPORT) + +HAL_StatusTypeDef HAL_RCCEx_EnablePLLSAI2(RCC_PLLSAI2InitTypeDef *PLLSAI2Init); +HAL_StatusTypeDef HAL_RCCEx_DisablePLLSAI2(void); + +#endif /* RCC_PLLSAI2_SUPPORT */ + +void HAL_RCCEx_WakeUpStopCLKConfig(uint32_t WakeUpClk); +void HAL_RCCEx_StandbyMSIRangeConfig(uint32_t MSIRange); +void HAL_RCCEx_EnableLSECSS(void); +void HAL_RCCEx_DisableLSECSS(void); +void HAL_RCCEx_EnableLSECSS_IT(void); +void HAL_RCCEx_LSECSS_IRQHandler(void); +void HAL_RCCEx_LSECSS_Callback(void); +void HAL_RCCEx_EnableLSCO(uint32_t LSCOSource); +void HAL_RCCEx_DisableLSCO(void); +void HAL_RCCEx_EnableMSIPLLMode(void); +void HAL_RCCEx_DisableMSIPLLMode(void); +#if defined (OCTOSPI1) && defined (OCTOSPI2) +void HAL_RCCEx_OCTOSPIDelayConfig(uint32_t Delay1, uint32_t Delay2); +#endif /* OCTOSPI1 && OCTOSPI2 */ + +/** + * @} + */ + +#if defined(CRS) + +/** @addtogroup RCCEx_Exported_Functions_Group3 + * @{ + */ + +void HAL_RCCEx_CRSConfig(RCC_CRSInitTypeDef *pInit); +void HAL_RCCEx_CRSSoftwareSynchronizationGenerate(void); +void HAL_RCCEx_CRSGetSynchronizationInfo(RCC_CRSSynchroInfoTypeDef *pSynchroInfo); +uint32_t HAL_RCCEx_CRSWaitSynchronization(uint32_t Timeout); +void HAL_RCCEx_CRS_IRQHandler(void); +void HAL_RCCEx_CRS_SyncOkCallback(void); +void HAL_RCCEx_CRS_SyncWarnCallback(void); +void HAL_RCCEx_CRS_ExpectedSyncCallback(void); +void HAL_RCCEx_CRS_ErrorCallback(uint32_t Error); + +/** + * @} + */ + +#endif /* CRS */ + +/** + * @} + */ + +/* Private constants ---------------------------------------------------------*/ +/** @addtogroup RCCEx_Private_Constants + * @{ + */ +/* Define used for IS_RCC_* macros below */ +#if defined(STM32L412xx) || defined(STM32L422xx) +#define RCC_PERIPHCLOCK_ALL (RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_USART2 | RCC_PERIPHCLK_USART3 | \ + RCC_PERIPHCLK_LPUART1 | \ + RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_I2C2 | RCC_PERIPHCLK_I2C3 | \ + RCC_PERIPHCLK_LPTIM1 | RCC_PERIPHCLK_LPTIM2 | \ + RCC_PERIPHCLK_USB | RCC_PERIPHCLK_ADC | RCC_PERIPHCLK_RTC | \ + RCC_PERIPHCLK_RNG) +#elif defined(STM32L431xx) +#define RCC_PERIPHCLOCK_ALL (RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_USART2 | RCC_PERIPHCLK_USART3 | \ + RCC_PERIPHCLK_LPUART1 | \ + RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_I2C2 | RCC_PERIPHCLK_I2C3 | \ + RCC_PERIPHCLK_LPTIM1 | RCC_PERIPHCLK_LPTIM2 | \ + RCC_PERIPHCLK_SAI1 | \ + RCC_PERIPHCLK_ADC | RCC_PERIPHCLK_SWPMI1 | \ + RCC_PERIPHCLK_RTC | RCC_PERIPHCLK_RNG | RCC_PERIPHCLK_SDMMC1) +#elif defined(STM32L432xx) || defined(STM32L442xx) +#define RCC_PERIPHCLOCK_ALL (RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_USART2 | \ + RCC_PERIPHCLK_LPUART1 | \ + RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_I2C3 | \ + RCC_PERIPHCLK_LPTIM1 | RCC_PERIPHCLK_LPTIM2 | \ + RCC_PERIPHCLK_SAI1 | \ + RCC_PERIPHCLK_USB | RCC_PERIPHCLK_ADC | \ + RCC_PERIPHCLK_SWPMI1 | RCC_PERIPHCLK_RTC | RCC_PERIPHCLK_RNG) +#elif defined(STM32L433xx) || defined(STM32L443xx) +#define RCC_PERIPHCLOCK_ALL (RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_USART2 | RCC_PERIPHCLK_USART3 |\ + RCC_PERIPHCLK_LPUART1 | \ + RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_I2C2 | RCC_PERIPHCLK_I2C3 | \ + RCC_PERIPHCLK_LPTIM1 | RCC_PERIPHCLK_LPTIM2 | \ + RCC_PERIPHCLK_SAI1 | \ + RCC_PERIPHCLK_USB | RCC_PERIPHCLK_ADC | RCC_PERIPHCLK_SWPMI1 | \ + RCC_PERIPHCLK_RTC | RCC_PERIPHCLK_RNG | RCC_PERIPHCLK_SDMMC1) +#elif defined(STM32L451xx) +#define RCC_PERIPHCLOCK_ALL (RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_USART2 | RCC_PERIPHCLK_USART3 |\ + RCC_PERIPHCLK_UART4 | \ + RCC_PERIPHCLK_LPUART1 | \ + RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_I2C2 | RCC_PERIPHCLK_I2C3 | \ + RCC_PERIPHCLK_I2C4 | \ + RCC_PERIPHCLK_LPTIM1 | RCC_PERIPHCLK_LPTIM2 | \ + RCC_PERIPHCLK_SAI1 | \ + RCC_PERIPHCLK_ADC | RCC_PERIPHCLK_DFSDM1 | \ + RCC_PERIPHCLK_RTC | RCC_PERIPHCLK_RNG | RCC_PERIPHCLK_SDMMC1) +#elif defined(STM32L452xx) || defined(STM32L462xx) +#define RCC_PERIPHCLOCK_ALL (RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_USART2 | RCC_PERIPHCLK_USART3 |\ + RCC_PERIPHCLK_UART4 | \ + RCC_PERIPHCLK_LPUART1 | \ + RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_I2C2 | RCC_PERIPHCLK_I2C3 | \ + RCC_PERIPHCLK_I2C4 | \ + RCC_PERIPHCLK_LPTIM1 | RCC_PERIPHCLK_LPTIM2 | \ + RCC_PERIPHCLK_SAI1 | \ + RCC_PERIPHCLK_USB | RCC_PERIPHCLK_ADC | RCC_PERIPHCLK_DFSDM1 | \ + RCC_PERIPHCLK_RTC | RCC_PERIPHCLK_RNG | RCC_PERIPHCLK_SDMMC1) +#elif defined(STM32L471xx) +#define RCC_PERIPHCLOCK_ALL (RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_USART2 | RCC_PERIPHCLK_USART3 | \ + RCC_PERIPHCLK_UART4 | RCC_PERIPHCLK_UART5 | \ + RCC_PERIPHCLK_LPUART1 | \ + RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_I2C2 | RCC_PERIPHCLK_I2C3 | \ + RCC_PERIPHCLK_LPTIM1 | RCC_PERIPHCLK_LPTIM2 | \ + RCC_PERIPHCLK_SAI1 | RCC_PERIPHCLK_SAI2 | \ + RCC_PERIPHCLK_ADC | RCC_PERIPHCLK_SWPMI1 | RCC_PERIPHCLK_DFSDM1 | \ + RCC_PERIPHCLK_RTC | RCC_PERIPHCLK_RNG | RCC_PERIPHCLK_SDMMC1) +#elif defined(STM32L496xx) || defined(STM32L4A6xx) +#define RCC_PERIPHCLOCK_ALL (RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_USART2 | RCC_PERIPHCLK_USART3 | \ + RCC_PERIPHCLK_UART4 | RCC_PERIPHCLK_UART5 | \ + RCC_PERIPHCLK_LPUART1 | \ + RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_I2C2 | RCC_PERIPHCLK_I2C3 | \ + RCC_PERIPHCLK_I2C4 | \ + RCC_PERIPHCLK_LPTIM1 | RCC_PERIPHCLK_LPTIM2 | \ + RCC_PERIPHCLK_SAI1 | RCC_PERIPHCLK_SAI2 | \ + RCC_PERIPHCLK_USB | \ + RCC_PERIPHCLK_ADC | RCC_PERIPHCLK_SWPMI1 | RCC_PERIPHCLK_DFSDM1 | \ + RCC_PERIPHCLK_RTC | RCC_PERIPHCLK_RNG | RCC_PERIPHCLK_SDMMC1) +#elif defined(STM32L4P5xx) || defined(STM32L4Q5xx) +#define RCC_PERIPHCLOCK_ALL (RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_USART2 | RCC_PERIPHCLK_USART3 | \ + RCC_PERIPHCLK_UART4 | RCC_PERIPHCLK_UART5 | \ + RCC_PERIPHCLK_LPUART1 | \ + RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_I2C2 | RCC_PERIPHCLK_I2C3 | \ + RCC_PERIPHCLK_I2C4 | \ + RCC_PERIPHCLK_LPTIM1 | RCC_PERIPHCLK_LPTIM2 | \ + RCC_PERIPHCLK_SAI1 | RCC_PERIPHCLK_SAI2 | \ + RCC_PERIPHCLK_USB | \ + RCC_PERIPHCLK_ADC | RCC_PERIPHCLK_DFSDM1 | RCC_PERIPHCLK_DFSDM1AUDIO | \ + RCC_PERIPHCLK_RTC | RCC_PERIPHCLK_RNG | RCC_PERIPHCLK_SDMMC1 | \ + RCC_PERIPHCLK_OSPI | RCC_PERIPHCLK_LTDC) +#elif defined(STM32L4R5xx) || defined(STM32L4S5xx) +#define RCC_PERIPHCLOCK_ALL (RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_USART2 | RCC_PERIPHCLK_USART3 | \ + RCC_PERIPHCLK_UART4 | RCC_PERIPHCLK_UART5 | \ + RCC_PERIPHCLK_LPUART1 | \ + RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_I2C2 | RCC_PERIPHCLK_I2C3 | \ + RCC_PERIPHCLK_I2C4 | \ + RCC_PERIPHCLK_LPTIM1 | RCC_PERIPHCLK_LPTIM2 | \ + RCC_PERIPHCLK_SAI1 | RCC_PERIPHCLK_SAI2 | \ + RCC_PERIPHCLK_USB | \ + RCC_PERIPHCLK_ADC | RCC_PERIPHCLK_DFSDM1 | RCC_PERIPHCLK_DFSDM1AUDIO | \ + RCC_PERIPHCLK_RTC | RCC_PERIPHCLK_RNG | RCC_PERIPHCLK_SDMMC1 | \ + RCC_PERIPHCLK_OSPI) +#elif defined(STM32L4R7xx) || defined(STM32L4S7xx) +#define RCC_PERIPHCLOCK_ALL (RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_USART2 | RCC_PERIPHCLK_USART3 | \ + RCC_PERIPHCLK_UART4 | RCC_PERIPHCLK_UART5 | \ + RCC_PERIPHCLK_LPUART1 | \ + RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_I2C2 | RCC_PERIPHCLK_I2C3 | \ + RCC_PERIPHCLK_I2C4 | \ + RCC_PERIPHCLK_LPTIM1 | RCC_PERIPHCLK_LPTIM2 | \ + RCC_PERIPHCLK_SAI1 | RCC_PERIPHCLK_SAI2 | \ + RCC_PERIPHCLK_USB | \ + RCC_PERIPHCLK_ADC | RCC_PERIPHCLK_DFSDM1 | RCC_PERIPHCLK_DFSDM1AUDIO | \ + RCC_PERIPHCLK_RTC | RCC_PERIPHCLK_RNG | RCC_PERIPHCLK_SDMMC1 | \ + RCC_PERIPHCLK_OSPI | RCC_PERIPHCLK_LTDC) +#elif defined(STM32L4R9xx) || defined(STM32L4S9xx) +#define RCC_PERIPHCLOCK_ALL (RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_USART2 | RCC_PERIPHCLK_USART3 | \ + RCC_PERIPHCLK_UART4 | RCC_PERIPHCLK_UART5 | \ + RCC_PERIPHCLK_LPUART1 | \ + RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_I2C2 | RCC_PERIPHCLK_I2C3 | \ + RCC_PERIPHCLK_I2C4 | \ + RCC_PERIPHCLK_LPTIM1 | RCC_PERIPHCLK_LPTIM2 | \ + RCC_PERIPHCLK_SAI1 | RCC_PERIPHCLK_SAI2 | \ + RCC_PERIPHCLK_USB | \ + RCC_PERIPHCLK_ADC | RCC_PERIPHCLK_DFSDM1 | RCC_PERIPHCLK_DFSDM1AUDIO | \ + RCC_PERIPHCLK_RTC | RCC_PERIPHCLK_RNG | RCC_PERIPHCLK_SDMMC1 | \ + RCC_PERIPHCLK_OSPI | RCC_PERIPHCLK_LTDC | RCC_PERIPHCLK_DSI) +#else +#define RCC_PERIPHCLOCK_ALL (RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_USART2 | RCC_PERIPHCLK_USART3 | \ + RCC_PERIPHCLK_UART4 | RCC_PERIPHCLK_UART5 | \ + RCC_PERIPHCLK_LPUART1 | \ + RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_I2C2 | RCC_PERIPHCLK_I2C3 | \ + RCC_PERIPHCLK_LPTIM1 | RCC_PERIPHCLK_LPTIM2 | \ + RCC_PERIPHCLK_SAI1 | RCC_PERIPHCLK_SAI2 | \ + RCC_PERIPHCLK_USB | \ + RCC_PERIPHCLK_ADC | RCC_PERIPHCLK_SWPMI1 | RCC_PERIPHCLK_DFSDM1 | \ + RCC_PERIPHCLK_RTC | RCC_PERIPHCLK_RNG | RCC_PERIPHCLK_SDMMC1) +#endif /* STM32L412xx || STM32L422xx */ + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @addtogroup RCCEx_Private_Macros + * @{ + */ + +#define IS_RCC_LSCOSOURCE(__SOURCE__) (((__SOURCE__) == RCC_LSCOSOURCE_LSI) || \ + ((__SOURCE__) == RCC_LSCOSOURCE_LSE)) + +#define IS_RCC_PERIPHCLOCK(__SELECTION__) ((((__SELECTION__) & RCC_PERIPHCLOCK_ALL) != 0x00u) && \ + (((__SELECTION__) & ~RCC_PERIPHCLOCK_ALL) == 0x00u)) + +#define IS_RCC_USART1CLKSOURCE(__SOURCE__) \ + (((__SOURCE__) == RCC_USART1CLKSOURCE_PCLK2) || \ + ((__SOURCE__) == RCC_USART1CLKSOURCE_SYSCLK) || \ + ((__SOURCE__) == RCC_USART1CLKSOURCE_LSE) || \ + ((__SOURCE__) == RCC_USART1CLKSOURCE_HSI)) + +#define IS_RCC_USART2CLKSOURCE(__SOURCE__) \ + (((__SOURCE__) == RCC_USART2CLKSOURCE_PCLK1) || \ + ((__SOURCE__) == RCC_USART2CLKSOURCE_SYSCLK) || \ + ((__SOURCE__) == RCC_USART2CLKSOURCE_LSE) || \ + ((__SOURCE__) == RCC_USART2CLKSOURCE_HSI)) + +#if defined(USART3) + +#define IS_RCC_USART3CLKSOURCE(__SOURCE__) \ + (((__SOURCE__) == RCC_USART3CLKSOURCE_PCLK1) || \ + ((__SOURCE__) == RCC_USART3CLKSOURCE_SYSCLK) || \ + ((__SOURCE__) == RCC_USART3CLKSOURCE_LSE) || \ + ((__SOURCE__) == RCC_USART3CLKSOURCE_HSI)) + +#endif /* USART3 */ + +#if defined(UART4) + +#define IS_RCC_UART4CLKSOURCE(__SOURCE__) \ + (((__SOURCE__) == RCC_UART4CLKSOURCE_PCLK1) || \ + ((__SOURCE__) == RCC_UART4CLKSOURCE_SYSCLK) || \ + ((__SOURCE__) == RCC_UART4CLKSOURCE_LSE) || \ + ((__SOURCE__) == RCC_UART4CLKSOURCE_HSI)) + +#endif /* UART4 */ + +#if defined(UART5) + +#define IS_RCC_UART5CLKSOURCE(__SOURCE__) \ + (((__SOURCE__) == RCC_UART5CLKSOURCE_PCLK1) || \ + ((__SOURCE__) == RCC_UART5CLKSOURCE_SYSCLK) || \ + ((__SOURCE__) == RCC_UART5CLKSOURCE_LSE) || \ + ((__SOURCE__) == RCC_UART5CLKSOURCE_HSI)) + +#endif /* UART5 */ + +#define IS_RCC_LPUART1CLKSOURCE(__SOURCE__) \ + (((__SOURCE__) == RCC_LPUART1CLKSOURCE_PCLK1) || \ + ((__SOURCE__) == RCC_LPUART1CLKSOURCE_SYSCLK) || \ + ((__SOURCE__) == RCC_LPUART1CLKSOURCE_LSE) || \ + ((__SOURCE__) == RCC_LPUART1CLKSOURCE_HSI)) + +#define IS_RCC_I2C1CLKSOURCE(__SOURCE__) \ + (((__SOURCE__) == RCC_I2C1CLKSOURCE_PCLK1) || \ + ((__SOURCE__) == RCC_I2C1CLKSOURCE_SYSCLK)|| \ + ((__SOURCE__) == RCC_I2C1CLKSOURCE_HSI)) + +#if defined(I2C2) + +#define IS_RCC_I2C2CLKSOURCE(__SOURCE__) \ + (((__SOURCE__) == RCC_I2C2CLKSOURCE_PCLK1) || \ + ((__SOURCE__) == RCC_I2C2CLKSOURCE_SYSCLK)|| \ + ((__SOURCE__) == RCC_I2C2CLKSOURCE_HSI)) + +#endif /* I2C2 */ + +#define IS_RCC_I2C3CLKSOURCE(__SOURCE__) \ + (((__SOURCE__) == RCC_I2C3CLKSOURCE_PCLK1) || \ + ((__SOURCE__) == RCC_I2C3CLKSOURCE_SYSCLK)|| \ + ((__SOURCE__) == RCC_I2C3CLKSOURCE_HSI)) + +#if defined(I2C4) + +#define IS_RCC_I2C4CLKSOURCE(__SOURCE__) \ + (((__SOURCE__) == RCC_I2C4CLKSOURCE_PCLK1) || \ + ((__SOURCE__) == RCC_I2C4CLKSOURCE_SYSCLK)|| \ + ((__SOURCE__) == RCC_I2C4CLKSOURCE_HSI)) + +#endif /* I2C4 */ + +#if defined(RCC_PLLSAI2_SUPPORT) + +#if defined(STM32L4P5xx) || defined(STM32L4Q5xx) || defined(STM32L4R5xx) || defined(STM32L4R7xx) || defined(STM32L4R9xx) || defined(STM32L4S5xx) || defined(STM32L4S7xx) || defined(STM32L4S9xx) +#define IS_RCC_SAI1CLK(__SOURCE__) \ + (((__SOURCE__) == RCC_SAI1CLKSOURCE_PLLSAI1) || \ + ((__SOURCE__) == RCC_SAI1CLKSOURCE_PLLSAI2) || \ + ((__SOURCE__) == RCC_SAI1CLKSOURCE_PLL) || \ + ((__SOURCE__) == RCC_SAI1CLKSOURCE_PIN) || \ + ((__SOURCE__) == RCC_SAI1CLKSOURCE_HSI)) +#else +#define IS_RCC_SAI1CLK(__SOURCE__) \ + (((__SOURCE__) == RCC_SAI1CLKSOURCE_PLLSAI1) || \ + ((__SOURCE__) == RCC_SAI1CLKSOURCE_PLLSAI2) || \ + ((__SOURCE__) == RCC_SAI1CLKSOURCE_PLL) || \ + ((__SOURCE__) == RCC_SAI1CLKSOURCE_PIN)) +#endif /* STM32L4P5xx || STM32L4Q5xx || STM32L4R5xx || STM32L4R7xx || STM32L4R9xx || STM32L4S5xx || STM32L4S7xx || STM32L4S9xx */ + +#elif defined(RCC_PLLSAI1_SUPPORT) + +#define IS_RCC_SAI1CLK(__SOURCE__) \ + (((__SOURCE__) == RCC_SAI1CLKSOURCE_PLLSAI1) || \ + ((__SOURCE__) == RCC_SAI1CLKSOURCE_PLL) || \ + ((__SOURCE__) == RCC_SAI1CLKSOURCE_PIN)) + +#endif /* RCC_PLLSAI2_SUPPORT */ + +#if defined(RCC_PLLSAI2_SUPPORT) + +#if defined(STM32L4P5xx) || defined(STM32L4Q5xx) || defined(STM32L4R5xx) || defined(STM32L4R7xx) || defined(STM32L4R9xx) || defined(STM32L4S5xx) || defined(STM32L4S7xx) || defined(STM32L4S9xx) +#define IS_RCC_SAI2CLK(__SOURCE__) \ + (((__SOURCE__) == RCC_SAI2CLKSOURCE_PLLSAI1) || \ + ((__SOURCE__) == RCC_SAI2CLKSOURCE_PLLSAI2) || \ + ((__SOURCE__) == RCC_SAI2CLKSOURCE_PLL) || \ + ((__SOURCE__) == RCC_SAI2CLKSOURCE_PIN) || \ + ((__SOURCE__) == RCC_SAI2CLKSOURCE_HSI)) +#else +#define IS_RCC_SAI2CLK(__SOURCE__) \ + (((__SOURCE__) == RCC_SAI2CLKSOURCE_PLLSAI1) || \ + ((__SOURCE__) == RCC_SAI2CLKSOURCE_PLLSAI2) || \ + ((__SOURCE__) == RCC_SAI2CLKSOURCE_PLL) || \ + ((__SOURCE__) == RCC_SAI2CLKSOURCE_PIN)) +#endif /* STM32L4P5xx || STM32L4Q5xx || STM32L4R5xx || STM32L4R7xx || STM32L4R9xx || STM32L4S5xx || STM32L4S7xx || STM32L4S9xx */ + +#endif /* RCC_PLLSAI2_SUPPORT */ + +#define IS_RCC_LPTIM1CLK(__SOURCE__) \ + (((__SOURCE__) == RCC_LPTIM1CLKSOURCE_PCLK1) || \ + ((__SOURCE__) == RCC_LPTIM1CLKSOURCE_LSI) || \ + ((__SOURCE__) == RCC_LPTIM1CLKSOURCE_HSI) || \ + ((__SOURCE__) == RCC_LPTIM1CLKSOURCE_LSE)) + +#define IS_RCC_LPTIM2CLK(__SOURCE__) \ + (((__SOURCE__) == RCC_LPTIM2CLKSOURCE_PCLK1) || \ + ((__SOURCE__) == RCC_LPTIM2CLKSOURCE_LSI) || \ + ((__SOURCE__) == RCC_LPTIM2CLKSOURCE_HSI) || \ + ((__SOURCE__) == RCC_LPTIM2CLKSOURCE_LSE)) + +#if defined(SDMMC1) +#if defined(RCC_HSI48_SUPPORT) && defined(RCC_CCIPR2_SDMMCSEL) + +#define IS_RCC_SDMMC1CLKSOURCE(__SOURCE__) \ + (((__SOURCE__) == RCC_SDMMC1CLKSOURCE_PLLP) || \ + ((__SOURCE__) == RCC_SDMMC1CLKSOURCE_HSI48) || \ + ((__SOURCE__) == RCC_SDMMC1CLKSOURCE_PLLSAI1) || \ + ((__SOURCE__) == RCC_SDMMC1CLKSOURCE_PLL) || \ + ((__SOURCE__) == RCC_SDMMC1CLKSOURCE_MSI)) + +#elif defined(RCC_HSI48_SUPPORT) + +#define IS_RCC_SDMMC1CLKSOURCE(__SOURCE__) \ + (((__SOURCE__) == RCC_SDMMC1CLKSOURCE_HSI48) || \ + ((__SOURCE__) == RCC_SDMMC1CLKSOURCE_PLLSAI1) || \ + ((__SOURCE__) == RCC_SDMMC1CLKSOURCE_PLL) || \ + ((__SOURCE__) == RCC_SDMMC1CLKSOURCE_MSI)) +#else + +#define IS_RCC_SDMMC1CLKSOURCE(__SOURCE__) \ + (((__SOURCE__) == RCC_SDMMC1CLKSOURCE_NONE) || \ + ((__SOURCE__) == RCC_SDMMC1CLKSOURCE_PLLSAI1) || \ + ((__SOURCE__) == RCC_SDMMC1CLKSOURCE_PLL) || \ + ((__SOURCE__) == RCC_SDMMC1CLKSOURCE_MSI)) + +#endif /* RCC_HSI48_SUPPORT */ +#endif /* SDMMC1 */ + +#if defined(RCC_HSI48_SUPPORT) + +#if defined(RCC_PLLSAI1_SUPPORT) +#define IS_RCC_RNGCLKSOURCE(__SOURCE__) \ + (((__SOURCE__) == RCC_RNGCLKSOURCE_HSI48) || \ + ((__SOURCE__) == RCC_RNGCLKSOURCE_PLLSAI1) || \ + ((__SOURCE__) == RCC_RNGCLKSOURCE_PLL) || \ + ((__SOURCE__) == RCC_RNGCLKSOURCE_MSI)) +#else +#define IS_RCC_RNGCLKSOURCE(__SOURCE__) \ + (((__SOURCE__) == RCC_RNGCLKSOURCE_HSI48) || \ + ((__SOURCE__) == RCC_RNGCLKSOURCE_PLL) || \ + ((__SOURCE__) == RCC_RNGCLKSOURCE_MSI)) +#endif /* RCC_PLLSAI1_SUPPORT */ + +#else + +#define IS_RCC_RNGCLKSOURCE(__SOURCE__) \ + (((__SOURCE__) == RCC_RNGCLKSOURCE_NONE) || \ + ((__SOURCE__) == RCC_RNGCLKSOURCE_PLLSAI1) || \ + ((__SOURCE__) == RCC_RNGCLKSOURCE_PLL) || \ + ((__SOURCE__) == RCC_RNGCLKSOURCE_MSI)) + +#endif /* RCC_HSI48_SUPPORT */ + +#if defined(USB_OTG_FS) || defined(USB) +#if defined(RCC_HSI48_SUPPORT) + +#if defined(RCC_PLLSAI1_SUPPORT) +#define IS_RCC_USBCLKSOURCE(__SOURCE__) \ + (((__SOURCE__) == RCC_USBCLKSOURCE_HSI48) || \ + ((__SOURCE__) == RCC_USBCLKSOURCE_PLLSAI1) || \ + ((__SOURCE__) == RCC_USBCLKSOURCE_PLL) || \ + ((__SOURCE__) == RCC_USBCLKSOURCE_MSI)) +#else +#define IS_RCC_USBCLKSOURCE(__SOURCE__) \ + (((__SOURCE__) == RCC_USBCLKSOURCE_HSI48) || \ + ((__SOURCE__) == RCC_USBCLKSOURCE_PLL) || \ + ((__SOURCE__) == RCC_USBCLKSOURCE_MSI)) +#endif /* RCC_PLLSAI1_SUPPORT */ + +#else + +#define IS_RCC_USBCLKSOURCE(__SOURCE__) \ + (((__SOURCE__) == RCC_USBCLKSOURCE_NONE) || \ + ((__SOURCE__) == RCC_USBCLKSOURCE_PLLSAI1) || \ + ((__SOURCE__) == RCC_USBCLKSOURCE_PLL) || \ + ((__SOURCE__) == RCC_USBCLKSOURCE_MSI)) + +#endif /* RCC_HSI48_SUPPORT */ +#endif /* USB_OTG_FS || USB */ + +#if defined(STM32L471xx) || defined(STM32L475xx) || defined(STM32L476xx) || defined(STM32L485xx) || defined(STM32L486xx) || defined(STM32L496xx) || defined(STM32L4A6xx) + +#define IS_RCC_ADCCLKSOURCE(__SOURCE__) \ + (((__SOURCE__) == RCC_ADCCLKSOURCE_NONE) || \ + ((__SOURCE__) == RCC_ADCCLKSOURCE_PLLSAI1) || \ + ((__SOURCE__) == RCC_ADCCLKSOURCE_PLLSAI2) || \ + ((__SOURCE__) == RCC_ADCCLKSOURCE_SYSCLK)) + +#else + +#if defined(RCC_PLLSAI1_SUPPORT) +#define IS_RCC_ADCCLKSOURCE(__SOURCE__) \ + (((__SOURCE__) == RCC_ADCCLKSOURCE_NONE) || \ + ((__SOURCE__) == RCC_ADCCLKSOURCE_PLLSAI1) || \ + ((__SOURCE__) == RCC_ADCCLKSOURCE_SYSCLK)) +#else +#define IS_RCC_ADCCLKSOURCE(__SOURCE__) \ + (((__SOURCE__) == RCC_ADCCLKSOURCE_NONE) || \ + ((__SOURCE__) == RCC_ADCCLKSOURCE_SYSCLK)) +#endif /* RCC_PLLSAI1_SUPPORT */ + +#endif /* STM32L471xx || STM32L475xx || STM32L476xx || STM32L485xx || STM32L486xx || STM32L496xx || STM32L4A6xx */ + +#if defined(SWPMI1) + +#define IS_RCC_SWPMI1CLKSOURCE(__SOURCE__) \ + (((__SOURCE__) == RCC_SWPMI1CLKSOURCE_PCLK1) || \ + ((__SOURCE__) == RCC_SWPMI1CLKSOURCE_HSI)) + +#endif /* SWPMI1 */ + +#if defined(DFSDM1_Filter0) + +#define IS_RCC_DFSDM1CLKSOURCE(__SOURCE__) \ + (((__SOURCE__) == RCC_DFSDM1CLKSOURCE_PCLK2) || \ + ((__SOURCE__) == RCC_DFSDM1CLKSOURCE_SYSCLK)) + +#if defined(STM32L4P5xx) || defined(STM32L4Q5xx) || defined(STM32L4R5xx) || defined(STM32L4R7xx) || defined(STM32L4R9xx) || defined(STM32L4S5xx) || defined(STM32L4S7xx) || defined(STM32L4S9xx) + +#define IS_RCC_DFSDM1AUDIOCLKSOURCE(__SOURCE__) \ + (((__SOURCE__) == RCC_DFSDM1AUDIOCLKSOURCE_SAI1) || \ + ((__SOURCE__) == RCC_DFSDM1AUDIOCLKSOURCE_HSI) || \ + ((__SOURCE__) == RCC_DFSDM1AUDIOCLKSOURCE_MSI)) + +#endif /* STM32L4P5xx || STM32L4Q5xx || STM32L4R5xx || STM32L4R7xx || STM32L4R9xx || STM32L4S5xx || STM32L4S7xx || STM32L4S9xx */ + +#endif /* DFSDM1_Filter0 */ + +#if defined(LTDC) + +#define IS_RCC_LTDCCLKSOURCE(__SOURCE__) \ + (((__SOURCE__) == RCC_LTDCCLKSOURCE_PLLSAI2_DIV2) || \ + ((__SOURCE__) == RCC_LTDCCLKSOURCE_PLLSAI2_DIV4) || \ + ((__SOURCE__) == RCC_LTDCCLKSOURCE_PLLSAI2_DIV8) || \ + ((__SOURCE__) == RCC_LTDCCLKSOURCE_PLLSAI2_DIV16)) + +#endif /* LTDC */ + +#if defined(DSI) + +#define IS_RCC_DSICLKSOURCE(__SOURCE__) \ + (((__SOURCE__) == RCC_DSICLKSOURCE_DSIPHY) || \ + ((__SOURCE__) == RCC_DSICLKSOURCE_PLLSAI2)) + +#endif /* DSI */ + +#if defined(OCTOSPI1) || defined(OCTOSPI2) + +#define IS_RCC_OSPICLKSOURCE(__SOURCE__) \ + (((__SOURCE__) == RCC_OSPICLKSOURCE_SYSCLK) || \ + ((__SOURCE__) == RCC_OSPICLKSOURCE_MSI) || \ + ((__SOURCE__) == RCC_OSPICLKSOURCE_PLL)) + +#endif /* OCTOSPI1 || OCTOSPI2 */ + +#if defined(RCC_PLLSAI1_SUPPORT) + +#define IS_RCC_PLLSAI1SOURCE(__VALUE__) IS_RCC_PLLSOURCE(__VALUE__) + +#if defined(RCC_PLLSAI1M_DIV_1_16_SUPPORT) +#define IS_RCC_PLLSAI1M_VALUE(__VALUE__) ((1U <= (__VALUE__)) && ((__VALUE__) <= 16U)) +#else +#define IS_RCC_PLLSAI1M_VALUE(__VALUE__) ((1U <= (__VALUE__)) && ((__VALUE__) <= 8U)) +#endif /* RCC_PLLSAI1M_DIV_1_16_SUPPORT */ + +#if defined(RCC_PLLSAI1N_MUL_8_127_SUPPORT) +#define IS_RCC_PLLSAI1N_VALUE(__VALUE__) ((8U <= (__VALUE__)) && ((__VALUE__) <= 127U)) +#else +#define IS_RCC_PLLSAI1N_VALUE(__VALUE__) ((8U <= (__VALUE__)) && ((__VALUE__) <= 86U)) +#endif /* RCC_PLLSAI1N_MUL_8_127_SUPPORT */ + +#if defined(RCC_PLLSAI1P_DIV_2_31_SUPPORT) +#define IS_RCC_PLLSAI1P_VALUE(__VALUE__) (((__VALUE__) >= 2U) && ((__VALUE__) <= 31U)) +#else +#define IS_RCC_PLLSAI1P_VALUE(__VALUE__) (((__VALUE__) == 7U) || ((__VALUE__) == 17U)) +#endif /* RCC_PLLSAI1P_DIV_2_31_SUPPORT */ + +#define IS_RCC_PLLSAI1Q_VALUE(__VALUE__) (((__VALUE__) == 2U) || ((__VALUE__) == 4U) || \ + ((__VALUE__) == 6U) || ((__VALUE__) == 8U)) + +#define IS_RCC_PLLSAI1R_VALUE(__VALUE__) (((__VALUE__) == 2U) || ((__VALUE__) == 4U) || \ + ((__VALUE__) == 6U) || ((__VALUE__) == 8U)) + +#endif /* RCC_PLLSAI1_SUPPORT */ + +#if defined(RCC_PLLSAI2_SUPPORT) + +#define IS_RCC_PLLSAI2SOURCE(__VALUE__) IS_RCC_PLLSOURCE(__VALUE__) + +#if defined(RCC_PLLSAI2M_DIV_1_16_SUPPORT) +#define IS_RCC_PLLSAI2M_VALUE(__VALUE__) ((1U <= (__VALUE__)) && ((__VALUE__) <= 16U)) +#else +#define IS_RCC_PLLSAI2M_VALUE(__VALUE__) ((1U <= (__VALUE__)) && ((__VALUE__) <= 8U)) +#endif /* RCC_PLLSAI2M_DIV_1_16_SUPPORT */ + +#if defined(RCC_PLLSAI2N_MUL_8_127_SUPPORT) +#define IS_RCC_PLLSAI2N_VALUE(__VALUE__) ((8U <= (__VALUE__)) && ((__VALUE__) <= 127U)) +#else +#define IS_RCC_PLLSAI2N_VALUE(__VALUE__) ((8U <= (__VALUE__)) && ((__VALUE__) <= 86U)) +#endif /* RCC_PLLSAI2N_MUL_8_127_SUPPORT */ + +#if defined(RCC_PLLSAI2P_DIV_2_31_SUPPORT) +#define IS_RCC_PLLSAI2P_VALUE(__VALUE__) (((__VALUE__) >= 2U) && ((__VALUE__) <= 31U)) +#else +#define IS_RCC_PLLSAI2P_VALUE(__VALUE__) (((__VALUE__) == 7U) || ((__VALUE__) == 17U)) +#endif /* RCC_PLLSAI2P_DIV_2_31_SUPPORT */ + +#if defined(RCC_PLLSAI2Q_DIV_SUPPORT) +#define IS_RCC_PLLSAI2Q_VALUE(__VALUE__) (((__VALUE__) == 2U) || ((__VALUE__) == 4U) || \ + ((__VALUE__) == 6U) || ((__VALUE__) == 8U)) +#endif /* RCC_PLLSAI2Q_DIV_SUPPORT */ + +#define IS_RCC_PLLSAI2R_VALUE(__VALUE__) (((__VALUE__) == 2U) || ((__VALUE__) == 4U) || \ + ((__VALUE__) == 6U) || ((__VALUE__) == 8U)) + +#endif /* RCC_PLLSAI2_SUPPORT */ + +#if defined (OCTOSPI1) && defined (OCTOSPI2) +#define IS_RCC_OCTOSPIDELAY(__DELAY__) (((__DELAY__) <= 0xFU)) +#endif /* OCTOSPI1 && OCTOSPI2 */ + +#if defined(CRS) + +#define IS_RCC_CRS_SYNC_SOURCE(__SOURCE__) (((__SOURCE__) == RCC_CRS_SYNC_SOURCE_GPIO) || \ + ((__SOURCE__) == RCC_CRS_SYNC_SOURCE_LSE) || \ + ((__SOURCE__) == RCC_CRS_SYNC_SOURCE_USB)) + +#define IS_RCC_CRS_SYNC_DIV(__DIV__) (((__DIV__) == RCC_CRS_SYNC_DIV1) || ((__DIV__) == RCC_CRS_SYNC_DIV2) || \ + ((__DIV__) == RCC_CRS_SYNC_DIV4) || ((__DIV__) == RCC_CRS_SYNC_DIV8) || \ + ((__DIV__) == RCC_CRS_SYNC_DIV16) || ((__DIV__) == RCC_CRS_SYNC_DIV32) || \ + ((__DIV__) == RCC_CRS_SYNC_DIV64) || ((__DIV__) == RCC_CRS_SYNC_DIV128)) + +#define IS_RCC_CRS_SYNC_POLARITY(__POLARITY__) (((__POLARITY__) == RCC_CRS_SYNC_POLARITY_RISING) || \ + ((__POLARITY__) == RCC_CRS_SYNC_POLARITY_FALLING)) + +#define IS_RCC_CRS_RELOADVALUE(__VALUE__) (((__VALUE__) <= 0xFFFFU)) + +#define IS_RCC_CRS_ERRORLIMIT(__VALUE__) (((__VALUE__) <= 0xFFU)) + +#if defined(STM32L412xx) || defined(STM32L422xx) +#define IS_RCC_CRS_HSI48CALIBRATION(__VALUE__) (((__VALUE__) <= 0x7FU)) +#else +#define IS_RCC_CRS_HSI48CALIBRATION(__VALUE__) (((__VALUE__) <= 0x3FU)) +#endif /* STM32L412xx || STM32L422xx */ + +#define IS_RCC_CRS_FREQERRORDIR(__DIR__) (((__DIR__) == RCC_CRS_FREQERRORDIR_UP) || \ + ((__DIR__) == RCC_CRS_FREQERRORDIR_DOWN)) + +#endif /* CRS */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32L4xx_HAL_RCC_EX_H */ + diff --git a/CablePositioning_IAP_V1.0/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_spi.h b/CablePositioning_IAP_V1.0/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_spi.h index 4fc7663..c139d46 100644 --- a/CablePositioning_IAP_V1.0/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_spi.h +++ b/CablePositioning_IAP_V1.0/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_spi.h @@ -1,851 +1,855 @@ -/** - ****************************************************************************** - * @file stm32l4xx_hal_spi.h - * @author MCD Application Team - * @brief Header file of SPI HAL module. - ****************************************************************************** - * @attention - * - * Copyright (c) 2017 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef STM32L4xx_HAL_SPI_H -#define STM32L4xx_HAL_SPI_H - -#ifdef __cplusplus -extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32l4xx_hal_def.h" - -/** @addtogroup STM32L4xx_HAL_Driver - * @{ - */ - -/** @addtogroup SPI - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ -/** @defgroup SPI_Exported_Types SPI Exported Types - * @{ - */ - -/** - * @brief SPI Configuration Structure definition - */ -typedef struct -{ - uint32_t Mode; /*!< Specifies the SPI operating mode. - This parameter can be a value of @ref SPI_Mode */ - - uint32_t Direction; /*!< Specifies the SPI bidirectional mode state. - This parameter can be a value of @ref SPI_Direction */ - - uint32_t DataSize; /*!< Specifies the SPI data size. - This parameter can be a value of @ref SPI_Data_Size */ - - uint32_t CLKPolarity; /*!< Specifies the serial clock steady state. - This parameter can be a value of @ref SPI_Clock_Polarity */ - - uint32_t CLKPhase; /*!< Specifies the clock active edge for the bit capture. - This parameter can be a value of @ref SPI_Clock_Phase */ - - uint32_t NSS; /*!< Specifies whether the NSS signal is managed by - hardware (NSS pin) or by software using the SSI bit. - This parameter can be a value of @ref SPI_Slave_Select_management */ - - uint32_t BaudRatePrescaler; /*!< Specifies the Baud Rate prescaler value which will be - used to configure the transmit and receive SCK clock. - This parameter can be a value of @ref SPI_BaudRate_Prescaler - @note The communication clock is derived from the master - clock. The slave clock does not need to be set. */ - - uint32_t FirstBit; /*!< Specifies whether data transfers start from MSB or LSB bit. - This parameter can be a value of @ref SPI_MSB_LSB_transmission */ - - uint32_t TIMode; /*!< Specifies if the TI mode is enabled or not. - This parameter can be a value of @ref SPI_TI_mode */ - - uint32_t CRCCalculation; /*!< Specifies if the CRC calculation is enabled or not. - This parameter can be a value of @ref SPI_CRC_Calculation */ - - uint32_t CRCPolynomial; /*!< Specifies the polynomial used for the CRC calculation. - This parameter must be an odd number between Min_Data = 1 and Max_Data = 65535 */ - - uint32_t CRCLength; /*!< Specifies the CRC Length used for the CRC calculation. - CRC Length is only used with Data8 and Data16, not other data size - This parameter can be a value of @ref SPI_CRC_length */ - - uint32_t NSSPMode; /*!< Specifies whether the NSSP signal is enabled or not . - This parameter can be a value of @ref SPI_NSSP_Mode - This mode is activated by the NSSP bit in the SPIx_CR2 register and - it takes effect only if the SPI interface is configured as Motorola SPI - master (FRF=0) with capture on the first edge (SPIx_CR1 CPHA = 0, - CPOL setting is ignored).. */ -} SPI_InitTypeDef; - -/** - * @brief HAL SPI State structure definition - */ -typedef enum -{ - HAL_SPI_STATE_RESET = 0x00U, /*!< Peripheral not Initialized */ - HAL_SPI_STATE_READY = 0x01U, /*!< Peripheral Initialized and ready for use */ - HAL_SPI_STATE_BUSY = 0x02U, /*!< an internal process is ongoing */ - HAL_SPI_STATE_BUSY_TX = 0x03U, /*!< Data Transmission process is ongoing */ - HAL_SPI_STATE_BUSY_RX = 0x04U, /*!< Data Reception process is ongoing */ - HAL_SPI_STATE_BUSY_TX_RX = 0x05U, /*!< Data Transmission and Reception process is ongoing */ - HAL_SPI_STATE_ERROR = 0x06U, /*!< SPI error state */ - HAL_SPI_STATE_ABORT = 0x07U /*!< SPI abort is ongoing */ -} HAL_SPI_StateTypeDef; - -/** - * @brief SPI handle Structure definition - */ -typedef struct __SPI_HandleTypeDef -{ - SPI_TypeDef *Instance; /*!< SPI registers base address */ - - SPI_InitTypeDef Init; /*!< SPI communication parameters */ - - uint8_t *pTxBuffPtr; /*!< Pointer to SPI Tx transfer Buffer */ - - uint16_t TxXferSize; /*!< SPI Tx Transfer size */ - - __IO uint16_t TxXferCount; /*!< SPI Tx Transfer Counter */ - - uint8_t *pRxBuffPtr; /*!< Pointer to SPI Rx transfer Buffer */ - - uint16_t RxXferSize; /*!< SPI Rx Transfer size */ - - __IO uint16_t RxXferCount; /*!< SPI Rx Transfer Counter */ - - uint32_t CRCSize; /*!< SPI CRC size used for the transfer */ - - void (*RxISR)(struct __SPI_HandleTypeDef *hspi); /*!< function pointer on Rx ISR */ - - void (*TxISR)(struct __SPI_HandleTypeDef *hspi); /*!< function pointer on Tx ISR */ - - DMA_HandleTypeDef *hdmatx; /*!< SPI Tx DMA Handle parameters */ - - DMA_HandleTypeDef *hdmarx; /*!< SPI Rx DMA Handle parameters */ - - HAL_LockTypeDef Lock; /*!< Locking object */ - - __IO HAL_SPI_StateTypeDef State; /*!< SPI communication state */ - - __IO uint32_t ErrorCode; /*!< SPI Error code */ - -#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) - void (* TxCpltCallback)(struct __SPI_HandleTypeDef *hspi); /*!< SPI Tx Completed callback */ - void (* RxCpltCallback)(struct __SPI_HandleTypeDef *hspi); /*!< SPI Rx Completed callback */ - void (* TxRxCpltCallback)(struct __SPI_HandleTypeDef *hspi); /*!< SPI TxRx Completed callback */ - void (* TxHalfCpltCallback)(struct __SPI_HandleTypeDef *hspi); /*!< SPI Tx Half Completed callback */ - void (* RxHalfCpltCallback)(struct __SPI_HandleTypeDef *hspi); /*!< SPI Rx Half Completed callback */ - void (* TxRxHalfCpltCallback)(struct __SPI_HandleTypeDef *hspi); /*!< SPI TxRx Half Completed callback */ - void (* ErrorCallback)(struct __SPI_HandleTypeDef *hspi); /*!< SPI Error callback */ - void (* AbortCpltCallback)(struct __SPI_HandleTypeDef *hspi); /*!< SPI Abort callback */ - void (* MspInitCallback)(struct __SPI_HandleTypeDef *hspi); /*!< SPI Msp Init callback */ - void (* MspDeInitCallback)(struct __SPI_HandleTypeDef *hspi); /*!< SPI Msp DeInit callback */ - -#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ -} SPI_HandleTypeDef; - -#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) -/** - * @brief HAL SPI Callback ID enumeration definition - */ -typedef enum -{ - HAL_SPI_TX_COMPLETE_CB_ID = 0x00U, /*!< SPI Tx Completed callback ID */ - HAL_SPI_RX_COMPLETE_CB_ID = 0x01U, /*!< SPI Rx Completed callback ID */ - HAL_SPI_TX_RX_COMPLETE_CB_ID = 0x02U, /*!< SPI TxRx Completed callback ID */ - HAL_SPI_TX_HALF_COMPLETE_CB_ID = 0x03U, /*!< SPI Tx Half Completed callback ID */ - HAL_SPI_RX_HALF_COMPLETE_CB_ID = 0x04U, /*!< SPI Rx Half Completed callback ID */ - HAL_SPI_TX_RX_HALF_COMPLETE_CB_ID = 0x05U, /*!< SPI TxRx Half Completed callback ID */ - HAL_SPI_ERROR_CB_ID = 0x06U, /*!< SPI Error callback ID */ - HAL_SPI_ABORT_CB_ID = 0x07U, /*!< SPI Abort callback ID */ - HAL_SPI_MSPINIT_CB_ID = 0x08U, /*!< SPI Msp Init callback ID */ - HAL_SPI_MSPDEINIT_CB_ID = 0x09U /*!< SPI Msp DeInit callback ID */ - -} HAL_SPI_CallbackIDTypeDef; - -/** - * @brief HAL SPI Callback pointer definition - */ -typedef void (*pSPI_CallbackTypeDef)(SPI_HandleTypeDef *hspi); /*!< pointer to an SPI callback function */ - -#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ -/** - * @} - */ - -/* Exported constants --------------------------------------------------------*/ -/** @defgroup SPI_Exported_Constants SPI Exported Constants - * @{ - */ - -/** @defgroup SPI_Error_Code SPI Error Code - * @{ - */ -#define HAL_SPI_ERROR_NONE (0x00000000U) /*!< No error */ -#define HAL_SPI_ERROR_MODF (0x00000001U) /*!< MODF error */ -#define HAL_SPI_ERROR_CRC (0x00000002U) /*!< CRC error */ -#define HAL_SPI_ERROR_OVR (0x00000004U) /*!< OVR error */ -#define HAL_SPI_ERROR_FRE (0x00000008U) /*!< FRE error */ -#define HAL_SPI_ERROR_DMA (0x00000010U) /*!< DMA transfer error */ -#define HAL_SPI_ERROR_FLAG (0x00000020U) /*!< Error on RXNE/TXE/BSY/FTLVL/FRLVL Flag */ -#define HAL_SPI_ERROR_ABORT (0x00000040U) /*!< Error during SPI Abort procedure */ -#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) -#define HAL_SPI_ERROR_INVALID_CALLBACK (0x00000080U) /*!< Invalid Callback error */ -#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ -/** - * @} - */ - -/** @defgroup SPI_Mode SPI Mode - * @{ - */ -#define SPI_MODE_SLAVE (0x00000000U) -#define SPI_MODE_MASTER (SPI_CR1_MSTR | SPI_CR1_SSI) -/** - * @} - */ - -/** @defgroup SPI_Direction SPI Direction Mode - * @{ - */ -#define SPI_DIRECTION_2LINES (0x00000000U) -#define SPI_DIRECTION_2LINES_RXONLY SPI_CR1_RXONLY -#define SPI_DIRECTION_1LINE SPI_CR1_BIDIMODE -/** - * @} - */ - -/** @defgroup SPI_Data_Size SPI Data Size - * @{ - */ -#define SPI_DATASIZE_4BIT (0x00000300U) -#define SPI_DATASIZE_5BIT (0x00000400U) -#define SPI_DATASIZE_6BIT (0x00000500U) -#define SPI_DATASIZE_7BIT (0x00000600U) -#define SPI_DATASIZE_8BIT (0x00000700U) -#define SPI_DATASIZE_9BIT (0x00000800U) -#define SPI_DATASIZE_10BIT (0x00000900U) -#define SPI_DATASIZE_11BIT (0x00000A00U) -#define SPI_DATASIZE_12BIT (0x00000B00U) -#define SPI_DATASIZE_13BIT (0x00000C00U) -#define SPI_DATASIZE_14BIT (0x00000D00U) -#define SPI_DATASIZE_15BIT (0x00000E00U) -#define SPI_DATASIZE_16BIT (0x00000F00U) -/** - * @} - */ - -/** @defgroup SPI_Clock_Polarity SPI Clock Polarity - * @{ - */ -#define SPI_POLARITY_LOW (0x00000000U) -#define SPI_POLARITY_HIGH SPI_CR1_CPOL -/** - * @} - */ - -/** @defgroup SPI_Clock_Phase SPI Clock Phase - * @{ - */ -#define SPI_PHASE_1EDGE (0x00000000U) -#define SPI_PHASE_2EDGE SPI_CR1_CPHA -/** - * @} - */ - -/** @defgroup SPI_Slave_Select_management SPI Slave Select Management - * @{ - */ -#define SPI_NSS_SOFT SPI_CR1_SSM -#define SPI_NSS_HARD_INPUT (0x00000000U) -#define SPI_NSS_HARD_OUTPUT (SPI_CR2_SSOE << 16U) -/** - * @} - */ - -/** @defgroup SPI_NSSP_Mode SPI NSS Pulse Mode - * @{ - */ -#define SPI_NSS_PULSE_ENABLE SPI_CR2_NSSP -#define SPI_NSS_PULSE_DISABLE (0x00000000U) -/** - * @} - */ - -/** @defgroup SPI_BaudRate_Prescaler SPI BaudRate Prescaler - * @{ - */ -#define SPI_BAUDRATEPRESCALER_2 (0x00000000U) -#define SPI_BAUDRATEPRESCALER_4 (SPI_CR1_BR_0) -#define SPI_BAUDRATEPRESCALER_8 (SPI_CR1_BR_1) -#define SPI_BAUDRATEPRESCALER_16 (SPI_CR1_BR_1 | SPI_CR1_BR_0) -#define SPI_BAUDRATEPRESCALER_32 (SPI_CR1_BR_2) -#define SPI_BAUDRATEPRESCALER_64 (SPI_CR1_BR_2 | SPI_CR1_BR_0) -#define SPI_BAUDRATEPRESCALER_128 (SPI_CR1_BR_2 | SPI_CR1_BR_1) -#define SPI_BAUDRATEPRESCALER_256 (SPI_CR1_BR_2 | SPI_CR1_BR_1 | SPI_CR1_BR_0) -/** - * @} - */ - -/** @defgroup SPI_MSB_LSB_transmission SPI MSB LSB Transmission - * @{ - */ -#define SPI_FIRSTBIT_MSB (0x00000000U) -#define SPI_FIRSTBIT_LSB SPI_CR1_LSBFIRST -/** - * @} - */ - -/** @defgroup SPI_TI_mode SPI TI Mode - * @{ - */ -#define SPI_TIMODE_DISABLE (0x00000000U) -#define SPI_TIMODE_ENABLE SPI_CR2_FRF -/** - * @} - */ - -/** @defgroup SPI_CRC_Calculation SPI CRC Calculation - * @{ - */ -#define SPI_CRCCALCULATION_DISABLE (0x00000000U) -#define SPI_CRCCALCULATION_ENABLE SPI_CR1_CRCEN -/** - * @} - */ - -/** @defgroup SPI_CRC_length SPI CRC Length - * @{ - * This parameter can be one of the following values: - * SPI_CRC_LENGTH_DATASIZE: aligned with the data size - * SPI_CRC_LENGTH_8BIT : CRC 8bit - * SPI_CRC_LENGTH_16BIT : CRC 16bit - */ -#define SPI_CRC_LENGTH_DATASIZE (0x00000000U) -#define SPI_CRC_LENGTH_8BIT (0x00000001U) -#define SPI_CRC_LENGTH_16BIT (0x00000002U) -/** - * @} - */ - -/** @defgroup SPI_FIFO_reception_threshold SPI FIFO Reception Threshold - * @{ - * This parameter can be one of the following values: - * SPI_RXFIFO_THRESHOLD or SPI_RXFIFO_THRESHOLD_QF : - * RXNE event is generated if the FIFO - * level is greater or equal to 1/4(8-bits). - * SPI_RXFIFO_THRESHOLD_HF: RXNE event is generated if the FIFO - * level is greater or equal to 1/2(16 bits). */ -#define SPI_RXFIFO_THRESHOLD SPI_CR2_FRXTH -#define SPI_RXFIFO_THRESHOLD_QF SPI_CR2_FRXTH -#define SPI_RXFIFO_THRESHOLD_HF (0x00000000U) -/** - * @} - */ - -/** @defgroup SPI_Interrupt_definition SPI Interrupt Definition - * @{ - */ -#define SPI_IT_TXE SPI_CR2_TXEIE -#define SPI_IT_RXNE SPI_CR2_RXNEIE -#define SPI_IT_ERR SPI_CR2_ERRIE -/** - * @} - */ - -/** @defgroup SPI_Flags_definition SPI Flags Definition - * @{ - */ -#define SPI_FLAG_RXNE SPI_SR_RXNE /* SPI status flag: Rx buffer not empty flag */ -#define SPI_FLAG_TXE SPI_SR_TXE /* SPI status flag: Tx buffer empty flag */ -#define SPI_FLAG_BSY SPI_SR_BSY /* SPI status flag: Busy flag */ -#define SPI_FLAG_CRCERR SPI_SR_CRCERR /* SPI Error flag: CRC error flag */ -#define SPI_FLAG_MODF SPI_SR_MODF /* SPI Error flag: Mode fault flag */ -#define SPI_FLAG_OVR SPI_SR_OVR /* SPI Error flag: Overrun flag */ -#define SPI_FLAG_FRE SPI_SR_FRE /* SPI Error flag: TI mode frame format error flag */ -#define SPI_FLAG_FTLVL SPI_SR_FTLVL /* SPI fifo transmission level */ -#define SPI_FLAG_FRLVL SPI_SR_FRLVL /* SPI fifo reception level */ -#define SPI_FLAG_MASK (SPI_SR_RXNE | SPI_SR_TXE | SPI_SR_BSY | SPI_SR_CRCERR\ - | SPI_SR_MODF | SPI_SR_OVR | SPI_SR_FRE | SPI_SR_FTLVL | SPI_SR_FRLVL) -/** - * @} - */ - -/** @defgroup SPI_transmission_fifo_status_level SPI Transmission FIFO Status Level - * @{ - */ -#define SPI_FTLVL_EMPTY (0x00000000U) -#define SPI_FTLVL_QUARTER_FULL (0x00000800U) -#define SPI_FTLVL_HALF_FULL (0x00001000U) -#define SPI_FTLVL_FULL (0x00001800U) - -/** - * @} - */ - -/** @defgroup SPI_reception_fifo_status_level SPI Reception FIFO Status Level - * @{ - */ -#define SPI_FRLVL_EMPTY (0x00000000U) -#define SPI_FRLVL_QUARTER_FULL (0x00000200U) -#define SPI_FRLVL_HALF_FULL (0x00000400U) -#define SPI_FRLVL_FULL (0x00000600U) -/** - * @} - */ - -/** - * @} - */ - -/* Exported macros -----------------------------------------------------------*/ -/** @defgroup SPI_Exported_Macros SPI Exported Macros - * @{ - */ - -/** @brief Reset SPI handle state. - * @param __HANDLE__ specifies the SPI Handle. - * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral. - * @retval None - */ -#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) -#define __HAL_SPI_RESET_HANDLE_STATE(__HANDLE__) do{ \ - (__HANDLE__)->State = HAL_SPI_STATE_RESET; \ - (__HANDLE__)->MspInitCallback = NULL; \ - (__HANDLE__)->MspDeInitCallback = NULL; \ - } while(0) -#else -#define __HAL_SPI_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_SPI_STATE_RESET) -#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ - -/** @brief Enable the specified SPI interrupts. - * @param __HANDLE__ specifies the SPI Handle. - * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral. - * @param __INTERRUPT__ specifies the interrupt source to enable. - * This parameter can be one of the following values: - * @arg SPI_IT_TXE: Tx buffer empty interrupt enable - * @arg SPI_IT_RXNE: RX buffer not empty interrupt enable - * @arg SPI_IT_ERR: Error interrupt enable - * @retval None - */ -#define __HAL_SPI_ENABLE_IT(__HANDLE__, __INTERRUPT__) SET_BIT((__HANDLE__)->Instance->CR2, (__INTERRUPT__)) - -/** @brief Disable the specified SPI interrupts. - * @param __HANDLE__ specifies the SPI handle. - * This parameter can be SPIx where x: 1, 2, or 3 to select the SPI peripheral. - * @param __INTERRUPT__ specifies the interrupt source to disable. - * This parameter can be one of the following values: - * @arg SPI_IT_TXE: Tx buffer empty interrupt enable - * @arg SPI_IT_RXNE: RX buffer not empty interrupt enable - * @arg SPI_IT_ERR: Error interrupt enable - * @retval None - */ -#define __HAL_SPI_DISABLE_IT(__HANDLE__, __INTERRUPT__) CLEAR_BIT((__HANDLE__)->Instance->CR2, (__INTERRUPT__)) - -/** @brief Check whether the specified SPI interrupt source is enabled or not. - * @param __HANDLE__ specifies the SPI Handle. - * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral. - * @param __INTERRUPT__ specifies the SPI interrupt source to check. - * This parameter can be one of the following values: - * @arg SPI_IT_TXE: Tx buffer empty interrupt enable - * @arg SPI_IT_RXNE: RX buffer not empty interrupt enable - * @arg SPI_IT_ERR: Error interrupt enable - * @retval The new state of __IT__ (TRUE or FALSE). - */ -#define __HAL_SPI_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->CR2\ - & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET) - -/** @brief Check whether the specified SPI flag is set or not. - * @param __HANDLE__ specifies the SPI Handle. - * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral. - * @param __FLAG__ specifies the flag to check. - * This parameter can be one of the following values: - * @arg SPI_FLAG_RXNE: Receive buffer not empty flag - * @arg SPI_FLAG_TXE: Transmit buffer empty flag - * @arg SPI_FLAG_CRCERR: CRC error flag - * @arg SPI_FLAG_MODF: Mode fault flag - * @arg SPI_FLAG_OVR: Overrun flag - * @arg SPI_FLAG_BSY: Busy flag - * @arg SPI_FLAG_FRE: Frame format error flag - * @arg SPI_FLAG_FTLVL: SPI fifo transmission level - * @arg SPI_FLAG_FRLVL: SPI fifo reception level - * @retval The new state of __FLAG__ (TRUE or FALSE). - */ -#define __HAL_SPI_GET_FLAG(__HANDLE__, __FLAG__) ((((__HANDLE__)->Instance->SR) & (__FLAG__)) == (__FLAG__)) - -/** @brief Clear the SPI CRCERR pending flag. - * @param __HANDLE__ specifies the SPI Handle. - * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral. - * @retval None - */ -#define __HAL_SPI_CLEAR_CRCERRFLAG(__HANDLE__) ((__HANDLE__)->Instance->SR = (uint16_t)(~SPI_FLAG_CRCERR)) - -/** @brief Clear the SPI MODF pending flag. - * @param __HANDLE__ specifies the SPI Handle. - * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral. - * @retval None - */ -#define __HAL_SPI_CLEAR_MODFFLAG(__HANDLE__) \ - do{ \ - __IO uint32_t tmpreg_modf = 0x00U; \ - tmpreg_modf = (__HANDLE__)->Instance->SR; \ - CLEAR_BIT((__HANDLE__)->Instance->CR1, SPI_CR1_SPE); \ - UNUSED(tmpreg_modf); \ - } while(0U) - -/** @brief Clear the SPI OVR pending flag. - * @param __HANDLE__ specifies the SPI Handle. - * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral. - * @retval None - */ -#define __HAL_SPI_CLEAR_OVRFLAG(__HANDLE__) \ - do{ \ - __IO uint32_t tmpreg_ovr = 0x00U; \ - tmpreg_ovr = (__HANDLE__)->Instance->DR; \ - tmpreg_ovr = (__HANDLE__)->Instance->SR; \ - UNUSED(tmpreg_ovr); \ - } while(0U) - -/** @brief Clear the SPI FRE pending flag. - * @param __HANDLE__ specifies the SPI Handle. - * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral. - * @retval None - */ -#define __HAL_SPI_CLEAR_FREFLAG(__HANDLE__) \ - do{ \ - __IO uint32_t tmpreg_fre = 0x00U; \ - tmpreg_fre = (__HANDLE__)->Instance->SR; \ - UNUSED(tmpreg_fre); \ - }while(0U) - -/** @brief Enable the SPI peripheral. - * @param __HANDLE__ specifies the SPI Handle. - * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral. - * @retval None - */ -#define __HAL_SPI_ENABLE(__HANDLE__) SET_BIT((__HANDLE__)->Instance->CR1, SPI_CR1_SPE) - -/** @brief Disable the SPI peripheral. - * @param __HANDLE__ specifies the SPI Handle. - * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral. - * @retval None - */ -#define __HAL_SPI_DISABLE(__HANDLE__) CLEAR_BIT((__HANDLE__)->Instance->CR1, SPI_CR1_SPE) - -/** - * @} - */ - -/* Private macros ------------------------------------------------------------*/ -/** @defgroup SPI_Private_Macros SPI Private Macros - * @{ - */ - -/** @brief Set the SPI transmit-only mode. - * @param __HANDLE__ specifies the SPI Handle. - * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral. - * @retval None - */ -#define SPI_1LINE_TX(__HANDLE__) SET_BIT((__HANDLE__)->Instance->CR1, SPI_CR1_BIDIOE) - -/** @brief Set the SPI receive-only mode. - * @param __HANDLE__ specifies the SPI Handle. - * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral. - * @retval None - */ -#define SPI_1LINE_RX(__HANDLE__) CLEAR_BIT((__HANDLE__)->Instance->CR1, SPI_CR1_BIDIOE) - -/** @brief Reset the CRC calculation of the SPI. - * @param __HANDLE__ specifies the SPI Handle. - * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral. - * @retval None - */ -#define SPI_RESET_CRC(__HANDLE__) do{CLEAR_BIT((__HANDLE__)->Instance->CR1, SPI_CR1_CRCEN);\ - SET_BIT((__HANDLE__)->Instance->CR1, SPI_CR1_CRCEN);}while(0U) - -/** @brief Check whether the specified SPI flag is set or not. - * @param __SR__ copy of SPI SR register. - * @param __FLAG__ specifies the flag to check. - * This parameter can be one of the following values: - * @arg SPI_FLAG_RXNE: Receive buffer not empty flag - * @arg SPI_FLAG_TXE: Transmit buffer empty flag - * @arg SPI_FLAG_CRCERR: CRC error flag - * @arg SPI_FLAG_MODF: Mode fault flag - * @arg SPI_FLAG_OVR: Overrun flag - * @arg SPI_FLAG_BSY: Busy flag - * @arg SPI_FLAG_FRE: Frame format error flag - * @arg SPI_FLAG_FTLVL: SPI fifo transmission level - * @arg SPI_FLAG_FRLVL: SPI fifo reception level - * @retval SET or RESET. - */ -#define SPI_CHECK_FLAG(__SR__, __FLAG__) ((((__SR__) & ((__FLAG__) & SPI_FLAG_MASK)) == \ - ((__FLAG__) & SPI_FLAG_MASK)) ? SET : RESET) - -/** @brief Check whether the specified SPI Interrupt is set or not. - * @param __CR2__ copy of SPI CR2 register. - * @param __INTERRUPT__ specifies the SPI interrupt source to check. - * This parameter can be one of the following values: - * @arg SPI_IT_TXE: Tx buffer empty interrupt enable - * @arg SPI_IT_RXNE: RX buffer not empty interrupt enable - * @arg SPI_IT_ERR: Error interrupt enable - * @retval SET or RESET. - */ -#define SPI_CHECK_IT_SOURCE(__CR2__, __INTERRUPT__) ((((__CR2__) & (__INTERRUPT__)) == \ - (__INTERRUPT__)) ? SET : RESET) - -/** @brief Checks if SPI Mode parameter is in allowed range. - * @param __MODE__ specifies the SPI Mode. - * This parameter can be a value of @ref SPI_Mode - * @retval None - */ -#define IS_SPI_MODE(__MODE__) (((__MODE__) == SPI_MODE_SLAVE) || \ - ((__MODE__) == SPI_MODE_MASTER)) - -/** @brief Checks if SPI Direction Mode parameter is in allowed range. - * @param __MODE__ specifies the SPI Direction Mode. - * This parameter can be a value of @ref SPI_Direction - * @retval None - */ -#define IS_SPI_DIRECTION(__MODE__) (((__MODE__) == SPI_DIRECTION_2LINES) || \ - ((__MODE__) == SPI_DIRECTION_2LINES_RXONLY) || \ - ((__MODE__) == SPI_DIRECTION_1LINE)) - -/** @brief Checks if SPI Direction Mode parameter is 2 lines. - * @param __MODE__ specifies the SPI Direction Mode. - * @retval None - */ -#define IS_SPI_DIRECTION_2LINES(__MODE__) ((__MODE__) == SPI_DIRECTION_2LINES) - -/** @brief Checks if SPI Direction Mode parameter is 1 or 2 lines. - * @param __MODE__ specifies the SPI Direction Mode. - * @retval None - */ -#define IS_SPI_DIRECTION_2LINES_OR_1LINE(__MODE__) (((__MODE__) == SPI_DIRECTION_2LINES) || \ - ((__MODE__) == SPI_DIRECTION_1LINE)) - -/** @brief Checks if SPI Data Size parameter is in allowed range. - * @param __DATASIZE__ specifies the SPI Data Size. - * This parameter can be a value of @ref SPI_Data_Size - * @retval None - */ -#define IS_SPI_DATASIZE(__DATASIZE__) (((__DATASIZE__) == SPI_DATASIZE_16BIT) || \ - ((__DATASIZE__) == SPI_DATASIZE_15BIT) || \ - ((__DATASIZE__) == SPI_DATASIZE_14BIT) || \ - ((__DATASIZE__) == SPI_DATASIZE_13BIT) || \ - ((__DATASIZE__) == SPI_DATASIZE_12BIT) || \ - ((__DATASIZE__) == SPI_DATASIZE_11BIT) || \ - ((__DATASIZE__) == SPI_DATASIZE_10BIT) || \ - ((__DATASIZE__) == SPI_DATASIZE_9BIT) || \ - ((__DATASIZE__) == SPI_DATASIZE_8BIT) || \ - ((__DATASIZE__) == SPI_DATASIZE_7BIT) || \ - ((__DATASIZE__) == SPI_DATASIZE_6BIT) || \ - ((__DATASIZE__) == SPI_DATASIZE_5BIT) || \ - ((__DATASIZE__) == SPI_DATASIZE_4BIT)) - -/** @brief Checks if SPI Serial clock steady state parameter is in allowed range. - * @param __CPOL__ specifies the SPI serial clock steady state. - * This parameter can be a value of @ref SPI_Clock_Polarity - * @retval None - */ -#define IS_SPI_CPOL(__CPOL__) (((__CPOL__) == SPI_POLARITY_LOW) || \ - ((__CPOL__) == SPI_POLARITY_HIGH)) - -/** @brief Checks if SPI Clock Phase parameter is in allowed range. - * @param __CPHA__ specifies the SPI Clock Phase. - * This parameter can be a value of @ref SPI_Clock_Phase - * @retval None - */ -#define IS_SPI_CPHA(__CPHA__) (((__CPHA__) == SPI_PHASE_1EDGE) || \ - ((__CPHA__) == SPI_PHASE_2EDGE)) - -/** @brief Checks if SPI Slave Select parameter is in allowed range. - * @param __NSS__ specifies the SPI Slave Select management parameter. - * This parameter can be a value of @ref SPI_Slave_Select_management - * @retval None - */ -#define IS_SPI_NSS(__NSS__) (((__NSS__) == SPI_NSS_SOFT) || \ - ((__NSS__) == SPI_NSS_HARD_INPUT) || \ - ((__NSS__) == SPI_NSS_HARD_OUTPUT)) - -/** @brief Checks if SPI NSS Pulse parameter is in allowed range. - * @param __NSSP__ specifies the SPI NSS Pulse Mode parameter. - * This parameter can be a value of @ref SPI_NSSP_Mode - * @retval None - */ -#define IS_SPI_NSSP(__NSSP__) (((__NSSP__) == SPI_NSS_PULSE_ENABLE) || \ - ((__NSSP__) == SPI_NSS_PULSE_DISABLE)) - -/** @brief Checks if SPI Baudrate prescaler parameter is in allowed range. - * @param __PRESCALER__ specifies the SPI Baudrate prescaler. - * This parameter can be a value of @ref SPI_BaudRate_Prescaler - * @retval None - */ -#define IS_SPI_BAUDRATE_PRESCALER(__PRESCALER__) (((__PRESCALER__) == SPI_BAUDRATEPRESCALER_2) || \ - ((__PRESCALER__) == SPI_BAUDRATEPRESCALER_4) || \ - ((__PRESCALER__) == SPI_BAUDRATEPRESCALER_8) || \ - ((__PRESCALER__) == SPI_BAUDRATEPRESCALER_16) || \ - ((__PRESCALER__) == SPI_BAUDRATEPRESCALER_32) || \ - ((__PRESCALER__) == SPI_BAUDRATEPRESCALER_64) || \ - ((__PRESCALER__) == SPI_BAUDRATEPRESCALER_128) || \ - ((__PRESCALER__) == SPI_BAUDRATEPRESCALER_256)) - -/** @brief Checks if SPI MSB LSB transmission parameter is in allowed range. - * @param __BIT__ specifies the SPI MSB LSB transmission (whether data transfer starts from MSB or LSB bit). - * This parameter can be a value of @ref SPI_MSB_LSB_transmission - * @retval None - */ -#define IS_SPI_FIRST_BIT(__BIT__) (((__BIT__) == SPI_FIRSTBIT_MSB) || \ - ((__BIT__) == SPI_FIRSTBIT_LSB)) - -/** @brief Checks if SPI TI mode parameter is in allowed range. - * @param __MODE__ specifies the SPI TI mode. - * This parameter can be a value of @ref SPI_TI_mode - * @retval None - */ -#define IS_SPI_TIMODE(__MODE__) (((__MODE__) == SPI_TIMODE_DISABLE) || \ - ((__MODE__) == SPI_TIMODE_ENABLE)) - -/** @brief Checks if SPI CRC calculation enabled state is in allowed range. - * @param __CALCULATION__ specifies the SPI CRC calculation enable state. - * This parameter can be a value of @ref SPI_CRC_Calculation - * @retval None - */ -#define IS_SPI_CRC_CALCULATION(__CALCULATION__) (((__CALCULATION__) == SPI_CRCCALCULATION_DISABLE) || \ - ((__CALCULATION__) == SPI_CRCCALCULATION_ENABLE)) - -/** @brief Checks if SPI CRC length is in allowed range. - * @param __LENGTH__ specifies the SPI CRC length. - * This parameter can be a value of @ref SPI_CRC_length - * @retval None - */ -#define IS_SPI_CRC_LENGTH(__LENGTH__) (((__LENGTH__) == SPI_CRC_LENGTH_DATASIZE) || \ - ((__LENGTH__) == SPI_CRC_LENGTH_8BIT) || \ - ((__LENGTH__) == SPI_CRC_LENGTH_16BIT)) - -/** @brief Checks if SPI polynomial value to be used for the CRC calculation, is in allowed range. - * @param __POLYNOMIAL__ specifies the SPI polynomial value to be used for the CRC calculation. - * This parameter must be a number between Min_Data = 0 and Max_Data = 65535 - * @retval None - */ -#define IS_SPI_CRC_POLYNOMIAL(__POLYNOMIAL__) (((__POLYNOMIAL__) >= 0x1U) && \ - ((__POLYNOMIAL__) <= 0xFFFFU) && \ - (((__POLYNOMIAL__)&0x1U) != 0U)) - -/** @brief Checks if DMA handle is valid. - * @param __HANDLE__ specifies a DMA Handle. - * @retval None - */ -#define IS_SPI_DMA_HANDLE(__HANDLE__) ((__HANDLE__) != NULL) - -/** - * @} - */ - -/* Include SPI HAL Extended module */ -#include "stm32l4xx_hal_spi_ex.h" - -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup SPI_Exported_Functions - * @{ - */ - -/** @addtogroup SPI_Exported_Functions_Group1 - * @{ - */ -/* Initialization/de-initialization functions ********************************/ -HAL_StatusTypeDef HAL_SPI_Init(SPI_HandleTypeDef *hspi); -HAL_StatusTypeDef HAL_SPI_DeInit(SPI_HandleTypeDef *hspi); -void HAL_SPI_MspInit(SPI_HandleTypeDef *hspi); -void HAL_SPI_MspDeInit(SPI_HandleTypeDef *hspi); - -/* Callbacks Register/UnRegister functions ***********************************/ -#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) -HAL_StatusTypeDef HAL_SPI_RegisterCallback(SPI_HandleTypeDef *hspi, HAL_SPI_CallbackIDTypeDef CallbackID, - pSPI_CallbackTypeDef pCallback); -HAL_StatusTypeDef HAL_SPI_UnRegisterCallback(SPI_HandleTypeDef *hspi, HAL_SPI_CallbackIDTypeDef CallbackID); -#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ -/** - * @} - */ - -/** @addtogroup SPI_Exported_Functions_Group2 - * @{ - */ -/* I/O operation functions ***************************************************/ -HAL_StatusTypeDef HAL_SPI_Transmit(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size, uint32_t Timeout); -HAL_StatusTypeDef HAL_SPI_Receive(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size, uint32_t Timeout); -HAL_StatusTypeDef HAL_SPI_TransmitReceive(SPI_HandleTypeDef *hspi, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size, - uint32_t Timeout); -HAL_StatusTypeDef HAL_SPI_Transmit_IT(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size); -HAL_StatusTypeDef HAL_SPI_Receive_IT(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size); -HAL_StatusTypeDef HAL_SPI_TransmitReceive_IT(SPI_HandleTypeDef *hspi, uint8_t *pTxData, uint8_t *pRxData, - uint16_t Size); -HAL_StatusTypeDef HAL_SPI_Transmit_DMA(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size); -HAL_StatusTypeDef HAL_SPI_Receive_DMA(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size); -HAL_StatusTypeDef HAL_SPI_TransmitReceive_DMA(SPI_HandleTypeDef *hspi, uint8_t *pTxData, uint8_t *pRxData, - uint16_t Size); -HAL_StatusTypeDef HAL_SPI_DMAPause(SPI_HandleTypeDef *hspi); -HAL_StatusTypeDef HAL_SPI_DMAResume(SPI_HandleTypeDef *hspi); -HAL_StatusTypeDef HAL_SPI_DMAStop(SPI_HandleTypeDef *hspi); -/* Transfer Abort functions */ -HAL_StatusTypeDef HAL_SPI_Abort(SPI_HandleTypeDef *hspi); -HAL_StatusTypeDef HAL_SPI_Abort_IT(SPI_HandleTypeDef *hspi); - -void HAL_SPI_IRQHandler(SPI_HandleTypeDef *hspi); -void HAL_SPI_TxCpltCallback(SPI_HandleTypeDef *hspi); -void HAL_SPI_RxCpltCallback(SPI_HandleTypeDef *hspi); -void HAL_SPI_TxRxCpltCallback(SPI_HandleTypeDef *hspi); -void HAL_SPI_TxHalfCpltCallback(SPI_HandleTypeDef *hspi); -void HAL_SPI_RxHalfCpltCallback(SPI_HandleTypeDef *hspi); -void HAL_SPI_TxRxHalfCpltCallback(SPI_HandleTypeDef *hspi); -void HAL_SPI_ErrorCallback(SPI_HandleTypeDef *hspi); -void HAL_SPI_AbortCpltCallback(SPI_HandleTypeDef *hspi); -/** - * @} - */ - -/** @addtogroup SPI_Exported_Functions_Group3 - * @{ - */ -/* Peripheral State and Error functions ***************************************/ -HAL_SPI_StateTypeDef HAL_SPI_GetState(SPI_HandleTypeDef *hspi); -uint32_t HAL_SPI_GetError(SPI_HandleTypeDef *hspi); -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /* STM32L4xx_HAL_SPI_H */ - +/** + ****************************************************************************** + * @file stm32l4xx_hal_spi.h + * @author MCD Application Team + * @brief Header file of SPI HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32L4xx_HAL_SPI_H +#define STM32L4xx_HAL_SPI_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l4xx_hal_def.h" + +/** @addtogroup STM32L4xx_HAL_Driver + * @{ + */ + +/** @addtogroup SPI + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup SPI_Exported_Types SPI Exported Types + * @{ + */ + +/** + * @brief SPI Configuration Structure definition + */ +typedef struct +{ + uint32_t Mode; /*!< Specifies the SPI operating mode. + This parameter can be a value of @ref SPI_Mode */ + + uint32_t Direction; /*!< Specifies the SPI bidirectional mode state. + This parameter can be a value of @ref SPI_Direction */ + + uint32_t DataSize; /*!< Specifies the SPI data size. + This parameter can be a value of @ref SPI_Data_Size */ + + uint32_t CLKPolarity; /*!< Specifies the serial clock steady state. + This parameter can be a value of @ref SPI_Clock_Polarity */ + + uint32_t CLKPhase; /*!< Specifies the clock active edge for the bit capture. + This parameter can be a value of @ref SPI_Clock_Phase */ + + uint32_t NSS; /*!< Specifies whether the NSS signal is managed by + hardware (NSS pin) or by software using the SSI bit. + This parameter can be a value of @ref SPI_Slave_Select_management */ + + uint32_t BaudRatePrescaler; /*!< Specifies the Baud Rate prescaler value which will be + used to configure the transmit and receive SCK clock. + This parameter can be a value of @ref SPI_BaudRate_Prescaler + @note The communication clock is derived from the master + clock. The slave clock does not need to be set. */ + + uint32_t FirstBit; /*!< Specifies whether data transfers start from MSB or LSB bit. + This parameter can be a value of @ref SPI_MSB_LSB_transmission */ + + uint32_t TIMode; /*!< Specifies if the TI mode is enabled or not. + This parameter can be a value of @ref SPI_TI_mode */ + + uint32_t CRCCalculation; /*!< Specifies if the CRC calculation is enabled or not. + This parameter can be a value of @ref SPI_CRC_Calculation */ + + uint32_t CRCPolynomial; /*!< Specifies the polynomial used for the CRC calculation. + This parameter must be an odd number between Min_Data = 1 and Max_Data = 65535 */ + + uint32_t CRCLength; /*!< Specifies the CRC Length used for the CRC calculation. + CRC Length is only used with Data8 and Data16, not other data size + This parameter can be a value of @ref SPI_CRC_length */ + + uint32_t NSSPMode; /*!< Specifies whether the NSSP signal is enabled or not . + This parameter can be a value of @ref SPI_NSSP_Mode + This mode is activated by the NSSP bit in the SPIx_CR2 register and + it takes effect only if the SPI interface is configured as Motorola SPI + master (FRF=0) with capture on the first edge (SPIx_CR1 CPHA = 0, + CPOL setting is ignored).. */ +} SPI_InitTypeDef; + +/** + * @brief HAL SPI State structure definition + */ +typedef enum +{ + HAL_SPI_STATE_RESET = 0x00U, /*!< Peripheral not Initialized */ + HAL_SPI_STATE_READY = 0x01U, /*!< Peripheral Initialized and ready for use */ + HAL_SPI_STATE_BUSY = 0x02U, /*!< an internal process is ongoing */ + HAL_SPI_STATE_BUSY_TX = 0x03U, /*!< Data Transmission process is ongoing */ + HAL_SPI_STATE_BUSY_RX = 0x04U, /*!< Data Reception process is ongoing */ + HAL_SPI_STATE_BUSY_TX_RX = 0x05U, /*!< Data Transmission and Reception process is ongoing */ + HAL_SPI_STATE_ERROR = 0x06U, /*!< SPI error state */ + HAL_SPI_STATE_ABORT = 0x07U /*!< SPI abort is ongoing */ +} HAL_SPI_StateTypeDef; + +/** + * @brief SPI handle Structure definition + */ +typedef struct __SPI_HandleTypeDef +{ + SPI_TypeDef *Instance; /*!< SPI registers base address */ + + SPI_InitTypeDef Init; /*!< SPI communication parameters */ + + const uint8_t *pTxBuffPtr; /*!< Pointer to SPI Tx transfer Buffer */ + + uint16_t TxXferSize; /*!< SPI Tx Transfer size */ + + __IO uint16_t TxXferCount; /*!< SPI Tx Transfer Counter */ + + uint8_t *pRxBuffPtr; /*!< Pointer to SPI Rx transfer Buffer */ + + uint16_t RxXferSize; /*!< SPI Rx Transfer size */ + + __IO uint16_t RxXferCount; /*!< SPI Rx Transfer Counter */ + + uint32_t CRCSize; /*!< SPI CRC size used for the transfer */ + + void (*RxISR)(struct __SPI_HandleTypeDef *hspi); /*!< function pointer on Rx ISR */ + + void (*TxISR)(struct __SPI_HandleTypeDef *hspi); /*!< function pointer on Tx ISR */ + + DMA_HandleTypeDef *hdmatx; /*!< SPI Tx DMA Handle parameters */ + + DMA_HandleTypeDef *hdmarx; /*!< SPI Rx DMA Handle parameters */ + + HAL_LockTypeDef Lock; /*!< Locking object */ + + __IO HAL_SPI_StateTypeDef State; /*!< SPI communication state */ + + __IO uint32_t ErrorCode; /*!< SPI Error code */ + +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) + void (* TxCpltCallback)(struct __SPI_HandleTypeDef *hspi); /*!< SPI Tx Completed callback */ + void (* RxCpltCallback)(struct __SPI_HandleTypeDef *hspi); /*!< SPI Rx Completed callback */ + void (* TxRxCpltCallback)(struct __SPI_HandleTypeDef *hspi); /*!< SPI TxRx Completed callback */ + void (* TxHalfCpltCallback)(struct __SPI_HandleTypeDef *hspi); /*!< SPI Tx Half Completed callback */ + void (* RxHalfCpltCallback)(struct __SPI_HandleTypeDef *hspi); /*!< SPI Rx Half Completed callback */ + void (* TxRxHalfCpltCallback)(struct __SPI_HandleTypeDef *hspi); /*!< SPI TxRx Half Completed callback */ + void (* ErrorCallback)(struct __SPI_HandleTypeDef *hspi); /*!< SPI Error callback */ + void (* AbortCpltCallback)(struct __SPI_HandleTypeDef *hspi); /*!< SPI Abort callback */ + void (* MspInitCallback)(struct __SPI_HandleTypeDef *hspi); /*!< SPI Msp Init callback */ + void (* MspDeInitCallback)(struct __SPI_HandleTypeDef *hspi); /*!< SPI Msp DeInit callback */ + +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ +} SPI_HandleTypeDef; + +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) +/** + * @brief HAL SPI Callback ID enumeration definition + */ +typedef enum +{ + HAL_SPI_TX_COMPLETE_CB_ID = 0x00U, /*!< SPI Tx Completed callback ID */ + HAL_SPI_RX_COMPLETE_CB_ID = 0x01U, /*!< SPI Rx Completed callback ID */ + HAL_SPI_TX_RX_COMPLETE_CB_ID = 0x02U, /*!< SPI TxRx Completed callback ID */ + HAL_SPI_TX_HALF_COMPLETE_CB_ID = 0x03U, /*!< SPI Tx Half Completed callback ID */ + HAL_SPI_RX_HALF_COMPLETE_CB_ID = 0x04U, /*!< SPI Rx Half Completed callback ID */ + HAL_SPI_TX_RX_HALF_COMPLETE_CB_ID = 0x05U, /*!< SPI TxRx Half Completed callback ID */ + HAL_SPI_ERROR_CB_ID = 0x06U, /*!< SPI Error callback ID */ + HAL_SPI_ABORT_CB_ID = 0x07U, /*!< SPI Abort callback ID */ + HAL_SPI_MSPINIT_CB_ID = 0x08U, /*!< SPI Msp Init callback ID */ + HAL_SPI_MSPDEINIT_CB_ID = 0x09U /*!< SPI Msp DeInit callback ID */ + +} HAL_SPI_CallbackIDTypeDef; + +/** + * @brief HAL SPI Callback pointer definition + */ +typedef void (*pSPI_CallbackTypeDef)(SPI_HandleTypeDef *hspi); /*!< pointer to an SPI callback function */ + +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup SPI_Exported_Constants SPI Exported Constants + * @{ + */ + +/** @defgroup SPI_Error_Code SPI Error Code + * @{ + */ +#define HAL_SPI_ERROR_NONE (0x00000000U) /*!< No error */ +#define HAL_SPI_ERROR_MODF (0x00000001U) /*!< MODF error */ +#define HAL_SPI_ERROR_CRC (0x00000002U) /*!< CRC error */ +#define HAL_SPI_ERROR_OVR (0x00000004U) /*!< OVR error */ +#define HAL_SPI_ERROR_FRE (0x00000008U) /*!< FRE error */ +#define HAL_SPI_ERROR_DMA (0x00000010U) /*!< DMA transfer error */ +#define HAL_SPI_ERROR_FLAG (0x00000020U) /*!< Error on RXNE/TXE/BSY/FTLVL/FRLVL Flag */ +#define HAL_SPI_ERROR_ABORT (0x00000040U) /*!< Error during SPI Abort procedure */ +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) +#define HAL_SPI_ERROR_INVALID_CALLBACK (0x00000080U) /*!< Invalid Callback error */ +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ +/** + * @} + */ + +/** @defgroup SPI_Mode SPI Mode + * @{ + */ +#define SPI_MODE_SLAVE (0x00000000U) +#define SPI_MODE_MASTER (SPI_CR1_MSTR | SPI_CR1_SSI) +/** + * @} + */ + +/** @defgroup SPI_Direction SPI Direction Mode + * @{ + */ +#define SPI_DIRECTION_2LINES (0x00000000U) +#define SPI_DIRECTION_2LINES_RXONLY SPI_CR1_RXONLY +#define SPI_DIRECTION_1LINE SPI_CR1_BIDIMODE +/** + * @} + */ + +/** @defgroup SPI_Data_Size SPI Data Size + * @{ + */ +#define SPI_DATASIZE_4BIT (0x00000300U) +#define SPI_DATASIZE_5BIT (0x00000400U) +#define SPI_DATASIZE_6BIT (0x00000500U) +#define SPI_DATASIZE_7BIT (0x00000600U) +#define SPI_DATASIZE_8BIT (0x00000700U) +#define SPI_DATASIZE_9BIT (0x00000800U) +#define SPI_DATASIZE_10BIT (0x00000900U) +#define SPI_DATASIZE_11BIT (0x00000A00U) +#define SPI_DATASIZE_12BIT (0x00000B00U) +#define SPI_DATASIZE_13BIT (0x00000C00U) +#define SPI_DATASIZE_14BIT (0x00000D00U) +#define SPI_DATASIZE_15BIT (0x00000E00U) +#define SPI_DATASIZE_16BIT (0x00000F00U) +/** + * @} + */ + +/** @defgroup SPI_Clock_Polarity SPI Clock Polarity + * @{ + */ +#define SPI_POLARITY_LOW (0x00000000U) +#define SPI_POLARITY_HIGH SPI_CR1_CPOL +/** + * @} + */ + +/** @defgroup SPI_Clock_Phase SPI Clock Phase + * @{ + */ +#define SPI_PHASE_1EDGE (0x00000000U) +#define SPI_PHASE_2EDGE SPI_CR1_CPHA +/** + * @} + */ + +/** @defgroup SPI_Slave_Select_management SPI Slave Select Management + * @{ + */ +#define SPI_NSS_SOFT SPI_CR1_SSM +#define SPI_NSS_HARD_INPUT (0x00000000U) +#define SPI_NSS_HARD_OUTPUT (SPI_CR2_SSOE << 16U) +/** + * @} + */ + +/** @defgroup SPI_NSSP_Mode SPI NSS Pulse Mode + * @{ + */ +#define SPI_NSS_PULSE_ENABLE SPI_CR2_NSSP +#define SPI_NSS_PULSE_DISABLE (0x00000000U) +/** + * @} + */ + +/** @defgroup SPI_BaudRate_Prescaler SPI BaudRate Prescaler + * @{ + */ +#define SPI_BAUDRATEPRESCALER_2 (0x00000000U) +#define SPI_BAUDRATEPRESCALER_4 (SPI_CR1_BR_0) +#define SPI_BAUDRATEPRESCALER_8 (SPI_CR1_BR_1) +#define SPI_BAUDRATEPRESCALER_16 (SPI_CR1_BR_1 | SPI_CR1_BR_0) +#define SPI_BAUDRATEPRESCALER_32 (SPI_CR1_BR_2) +#define SPI_BAUDRATEPRESCALER_64 (SPI_CR1_BR_2 | SPI_CR1_BR_0) +#define SPI_BAUDRATEPRESCALER_128 (SPI_CR1_BR_2 | SPI_CR1_BR_1) +#define SPI_BAUDRATEPRESCALER_256 (SPI_CR1_BR_2 | SPI_CR1_BR_1 | SPI_CR1_BR_0) +/** + * @} + */ + +/** @defgroup SPI_MSB_LSB_transmission SPI MSB LSB Transmission + * @{ + */ +#define SPI_FIRSTBIT_MSB (0x00000000U) +#define SPI_FIRSTBIT_LSB SPI_CR1_LSBFIRST +/** + * @} + */ + +/** @defgroup SPI_TI_mode SPI TI Mode + * @{ + */ +#define SPI_TIMODE_DISABLE (0x00000000U) +#define SPI_TIMODE_ENABLE SPI_CR2_FRF +/** + * @} + */ + +/** @defgroup SPI_CRC_Calculation SPI CRC Calculation + * @{ + */ +#define SPI_CRCCALCULATION_DISABLE (0x00000000U) +#define SPI_CRCCALCULATION_ENABLE SPI_CR1_CRCEN +/** + * @} + */ + +/** @defgroup SPI_CRC_length SPI CRC Length + * @{ + * This parameter can be one of the following values: + * SPI_CRC_LENGTH_DATASIZE: aligned with the data size + * SPI_CRC_LENGTH_8BIT : CRC 8bit + * SPI_CRC_LENGTH_16BIT : CRC 16bit + */ +#define SPI_CRC_LENGTH_DATASIZE (0x00000000U) +#define SPI_CRC_LENGTH_8BIT (0x00000001U) +#define SPI_CRC_LENGTH_16BIT (0x00000002U) +/** + * @} + */ + +/** @defgroup SPI_FIFO_reception_threshold SPI FIFO Reception Threshold + * @{ + * This parameter can be one of the following values: + * SPI_RXFIFO_THRESHOLD or SPI_RXFIFO_THRESHOLD_QF : + * RXNE event is generated if the FIFO + * level is greater or equal to 1/4(8-bits). + * SPI_RXFIFO_THRESHOLD_HF: RXNE event is generated if the FIFO + * level is greater or equal to 1/2(16 bits). */ +#define SPI_RXFIFO_THRESHOLD SPI_CR2_FRXTH +#define SPI_RXFIFO_THRESHOLD_QF SPI_CR2_FRXTH +#define SPI_RXFIFO_THRESHOLD_HF (0x00000000U) +/** + * @} + */ + +/** @defgroup SPI_Interrupt_definition SPI Interrupt Definition + * @{ + */ +#define SPI_IT_TXE SPI_CR2_TXEIE +#define SPI_IT_RXNE SPI_CR2_RXNEIE +#define SPI_IT_ERR SPI_CR2_ERRIE +/** + * @} + */ + +/** @defgroup SPI_Flags_definition SPI Flags Definition + * @{ + */ +#define SPI_FLAG_RXNE SPI_SR_RXNE /* SPI status flag: Rx buffer not empty flag */ +#define SPI_FLAG_TXE SPI_SR_TXE /* SPI status flag: Tx buffer empty flag */ +#define SPI_FLAG_BSY SPI_SR_BSY /* SPI status flag: Busy flag */ +#define SPI_FLAG_CRCERR SPI_SR_CRCERR /* SPI Error flag: CRC error flag */ +#define SPI_FLAG_MODF SPI_SR_MODF /* SPI Error flag: Mode fault flag */ +#define SPI_FLAG_OVR SPI_SR_OVR /* SPI Error flag: Overrun flag */ +#define SPI_FLAG_FRE SPI_SR_FRE /* SPI Error flag: TI mode frame format error flag */ +#define SPI_FLAG_FTLVL SPI_SR_FTLVL /* SPI fifo transmission level */ +#define SPI_FLAG_FRLVL SPI_SR_FRLVL /* SPI fifo reception level */ +#define SPI_FLAG_MASK (SPI_SR_RXNE | SPI_SR_TXE | SPI_SR_BSY | SPI_SR_CRCERR\ + | SPI_SR_MODF | SPI_SR_OVR | SPI_SR_FRE | SPI_SR_FTLVL | SPI_SR_FRLVL) +/** + * @} + */ + +/** @defgroup SPI_transmission_fifo_status_level SPI Transmission FIFO Status Level + * @{ + */ +#define SPI_FTLVL_EMPTY (0x00000000U) +#define SPI_FTLVL_QUARTER_FULL (0x00000800U) +#define SPI_FTLVL_HALF_FULL (0x00001000U) +#define SPI_FTLVL_FULL (0x00001800U) + +/** + * @} + */ + +/** @defgroup SPI_reception_fifo_status_level SPI Reception FIFO Status Level + * @{ + */ +#define SPI_FRLVL_EMPTY (0x00000000U) +#define SPI_FRLVL_QUARTER_FULL (0x00000200U) +#define SPI_FRLVL_HALF_FULL (0x00000400U) +#define SPI_FRLVL_FULL (0x00000600U) +/** + * @} + */ + +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ +/** @defgroup SPI_Exported_Macros SPI Exported Macros + * @{ + */ + +/** @brief Reset SPI handle state. + * @param __HANDLE__ specifies the SPI Handle. + * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral. + * @retval None + */ +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) +#define __HAL_SPI_RESET_HANDLE_STATE(__HANDLE__) \ + do{ \ + (__HANDLE__)->State = HAL_SPI_STATE_RESET; \ + (__HANDLE__)->MspInitCallback = NULL; \ + (__HANDLE__)->MspDeInitCallback = NULL; \ + } while(0) +#else +#define __HAL_SPI_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_SPI_STATE_RESET) +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ + +/** @brief Enable the specified SPI interrupts. + * @param __HANDLE__ specifies the SPI Handle. + * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral. + * @param __INTERRUPT__ specifies the interrupt source to enable. + * This parameter can be one of the following values: + * @arg SPI_IT_TXE: Tx buffer empty interrupt enable + * @arg SPI_IT_RXNE: RX buffer not empty interrupt enable + * @arg SPI_IT_ERR: Error interrupt enable + * @retval None + */ +#define __HAL_SPI_ENABLE_IT(__HANDLE__, __INTERRUPT__) SET_BIT((__HANDLE__)->Instance->CR2, (__INTERRUPT__)) + +/** @brief Disable the specified SPI interrupts. + * @param __HANDLE__ specifies the SPI handle. + * This parameter can be SPIx where x: 1, 2, or 3 to select the SPI peripheral. + * @param __INTERRUPT__ specifies the interrupt source to disable. + * This parameter can be one of the following values: + * @arg SPI_IT_TXE: Tx buffer empty interrupt enable + * @arg SPI_IT_RXNE: RX buffer not empty interrupt enable + * @arg SPI_IT_ERR: Error interrupt enable + * @retval None + */ +#define __HAL_SPI_DISABLE_IT(__HANDLE__, __INTERRUPT__) CLEAR_BIT((__HANDLE__)->Instance->CR2, (__INTERRUPT__)) + +/** @brief Check whether the specified SPI interrupt source is enabled or not. + * @param __HANDLE__ specifies the SPI Handle. + * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral. + * @param __INTERRUPT__ specifies the SPI interrupt source to check. + * This parameter can be one of the following values: + * @arg SPI_IT_TXE: Tx buffer empty interrupt enable + * @arg SPI_IT_RXNE: RX buffer not empty interrupt enable + * @arg SPI_IT_ERR: Error interrupt enable + * @retval The new state of __IT__ (TRUE or FALSE). + */ +#define __HAL_SPI_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->CR2\ + & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET) + +/** @brief Check whether the specified SPI flag is set or not. + * @param __HANDLE__ specifies the SPI Handle. + * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral. + * @param __FLAG__ specifies the flag to check. + * This parameter can be one of the following values: + * @arg SPI_FLAG_RXNE: Receive buffer not empty flag + * @arg SPI_FLAG_TXE: Transmit buffer empty flag + * @arg SPI_FLAG_CRCERR: CRC error flag + * @arg SPI_FLAG_MODF: Mode fault flag + * @arg SPI_FLAG_OVR: Overrun flag + * @arg SPI_FLAG_BSY: Busy flag + * @arg SPI_FLAG_FRE: Frame format error flag + * @arg SPI_FLAG_FTLVL: SPI fifo transmission level + * @arg SPI_FLAG_FRLVL: SPI fifo reception level + * @retval The new state of __FLAG__ (TRUE or FALSE). + */ +#define __HAL_SPI_GET_FLAG(__HANDLE__, __FLAG__) ((((__HANDLE__)->Instance->SR) & (__FLAG__)) == (__FLAG__)) + +/** @brief Clear the SPI CRCERR pending flag. + * @param __HANDLE__ specifies the SPI Handle. + * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral. + * @retval None + */ +#define __HAL_SPI_CLEAR_CRCERRFLAG(__HANDLE__) ((__HANDLE__)->Instance->SR = (uint16_t)(~SPI_FLAG_CRCERR)) + +/** @brief Clear the SPI MODF pending flag. + * @param __HANDLE__ specifies the SPI Handle. + * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral. + * @retval None + */ +#define __HAL_SPI_CLEAR_MODFFLAG(__HANDLE__) \ + do{ \ + __IO uint32_t tmpreg_modf = 0x00U; \ + tmpreg_modf = (__HANDLE__)->Instance->SR; \ + CLEAR_BIT((__HANDLE__)->Instance->CR1, SPI_CR1_SPE); \ + UNUSED(tmpreg_modf); \ + } while(0U) + +/** @brief Clear the SPI OVR pending flag. + * @param __HANDLE__ specifies the SPI Handle. + * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral. + * @retval None + */ +#define __HAL_SPI_CLEAR_OVRFLAG(__HANDLE__) \ + do{ \ + __IO uint32_t tmpreg_ovr = 0x00U; \ + tmpreg_ovr = (__HANDLE__)->Instance->DR; \ + tmpreg_ovr = (__HANDLE__)->Instance->SR; \ + UNUSED(tmpreg_ovr); \ + } while(0U) + +/** @brief Clear the SPI FRE pending flag. + * @param __HANDLE__ specifies the SPI Handle. + * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral. + * @retval None + */ +#define __HAL_SPI_CLEAR_FREFLAG(__HANDLE__) \ + do{ \ + __IO uint32_t tmpreg_fre = 0x00U; \ + tmpreg_fre = (__HANDLE__)->Instance->SR; \ + UNUSED(tmpreg_fre); \ + } while(0U) + +/** @brief Enable the SPI peripheral. + * @param __HANDLE__ specifies the SPI Handle. + * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral. + * @retval None + */ +#define __HAL_SPI_ENABLE(__HANDLE__) SET_BIT((__HANDLE__)->Instance->CR1, SPI_CR1_SPE) + +/** @brief Disable the SPI peripheral. + * @param __HANDLE__ specifies the SPI Handle. + * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral. + * @retval None + */ +#define __HAL_SPI_DISABLE(__HANDLE__) CLEAR_BIT((__HANDLE__)->Instance->CR1, SPI_CR1_SPE) + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup SPI_Private_Macros SPI Private Macros + * @{ + */ + +/** @brief Set the SPI transmit-only mode. + * @param __HANDLE__ specifies the SPI Handle. + * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral. + * @retval None + */ +#define SPI_1LINE_TX(__HANDLE__) SET_BIT((__HANDLE__)->Instance->CR1, SPI_CR1_BIDIOE) + +/** @brief Set the SPI receive-only mode. + * @param __HANDLE__ specifies the SPI Handle. + * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral. + * @retval None + */ +#define SPI_1LINE_RX(__HANDLE__) CLEAR_BIT((__HANDLE__)->Instance->CR1, SPI_CR1_BIDIOE) + +/** @brief Reset the CRC calculation of the SPI. + * @param __HANDLE__ specifies the SPI Handle. + * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral. + * @retval None + */ +#define SPI_RESET_CRC(__HANDLE__) \ + do{ \ + CLEAR_BIT((__HANDLE__)->Instance->CR1, SPI_CR1_CRCEN); \ + SET_BIT((__HANDLE__)->Instance->CR1, SPI_CR1_CRCEN); \ + } while(0U) + +/** @brief Check whether the specified SPI flag is set or not. + * @param __SR__ copy of SPI SR register. + * @param __FLAG__ specifies the flag to check. + * This parameter can be one of the following values: + * @arg SPI_FLAG_RXNE: Receive buffer not empty flag + * @arg SPI_FLAG_TXE: Transmit buffer empty flag + * @arg SPI_FLAG_CRCERR: CRC error flag + * @arg SPI_FLAG_MODF: Mode fault flag + * @arg SPI_FLAG_OVR: Overrun flag + * @arg SPI_FLAG_BSY: Busy flag + * @arg SPI_FLAG_FRE: Frame format error flag + * @arg SPI_FLAG_FTLVL: SPI fifo transmission level + * @arg SPI_FLAG_FRLVL: SPI fifo reception level + * @retval SET or RESET. + */ +#define SPI_CHECK_FLAG(__SR__, __FLAG__) ((((__SR__) & ((__FLAG__) & SPI_FLAG_MASK)) == \ + ((__FLAG__) & SPI_FLAG_MASK)) ? SET : RESET) + +/** @brief Check whether the specified SPI Interrupt is set or not. + * @param __CR2__ copy of SPI CR2 register. + * @param __INTERRUPT__ specifies the SPI interrupt source to check. + * This parameter can be one of the following values: + * @arg SPI_IT_TXE: Tx buffer empty interrupt enable + * @arg SPI_IT_RXNE: RX buffer not empty interrupt enable + * @arg SPI_IT_ERR: Error interrupt enable + * @retval SET or RESET. + */ +#define SPI_CHECK_IT_SOURCE(__CR2__, __INTERRUPT__) ((((__CR2__) & (__INTERRUPT__)) == \ + (__INTERRUPT__)) ? SET : RESET) + +/** @brief Checks if SPI Mode parameter is in allowed range. + * @param __MODE__ specifies the SPI Mode. + * This parameter can be a value of @ref SPI_Mode + * @retval None + */ +#define IS_SPI_MODE(__MODE__) (((__MODE__) == SPI_MODE_SLAVE) || \ + ((__MODE__) == SPI_MODE_MASTER)) + +/** @brief Checks if SPI Direction Mode parameter is in allowed range. + * @param __MODE__ specifies the SPI Direction Mode. + * This parameter can be a value of @ref SPI_Direction + * @retval None + */ +#define IS_SPI_DIRECTION(__MODE__) (((__MODE__) == SPI_DIRECTION_2LINES) || \ + ((__MODE__) == SPI_DIRECTION_2LINES_RXONLY) || \ + ((__MODE__) == SPI_DIRECTION_1LINE)) + +/** @brief Checks if SPI Direction Mode parameter is 2 lines. + * @param __MODE__ specifies the SPI Direction Mode. + * @retval None + */ +#define IS_SPI_DIRECTION_2LINES(__MODE__) ((__MODE__) == SPI_DIRECTION_2LINES) + +/** @brief Checks if SPI Direction Mode parameter is 1 or 2 lines. + * @param __MODE__ specifies the SPI Direction Mode. + * @retval None + */ +#define IS_SPI_DIRECTION_2LINES_OR_1LINE(__MODE__) (((__MODE__) == SPI_DIRECTION_2LINES) || \ + ((__MODE__) == SPI_DIRECTION_1LINE)) + +/** @brief Checks if SPI Data Size parameter is in allowed range. + * @param __DATASIZE__ specifies the SPI Data Size. + * This parameter can be a value of @ref SPI_Data_Size + * @retval None + */ +#define IS_SPI_DATASIZE(__DATASIZE__) (((__DATASIZE__) == SPI_DATASIZE_16BIT) || \ + ((__DATASIZE__) == SPI_DATASIZE_15BIT) || \ + ((__DATASIZE__) == SPI_DATASIZE_14BIT) || \ + ((__DATASIZE__) == SPI_DATASIZE_13BIT) || \ + ((__DATASIZE__) == SPI_DATASIZE_12BIT) || \ + ((__DATASIZE__) == SPI_DATASIZE_11BIT) || \ + ((__DATASIZE__) == SPI_DATASIZE_10BIT) || \ + ((__DATASIZE__) == SPI_DATASIZE_9BIT) || \ + ((__DATASIZE__) == SPI_DATASIZE_8BIT) || \ + ((__DATASIZE__) == SPI_DATASIZE_7BIT) || \ + ((__DATASIZE__) == SPI_DATASIZE_6BIT) || \ + ((__DATASIZE__) == SPI_DATASIZE_5BIT) || \ + ((__DATASIZE__) == SPI_DATASIZE_4BIT)) + +/** @brief Checks if SPI Serial clock steady state parameter is in allowed range. + * @param __CPOL__ specifies the SPI serial clock steady state. + * This parameter can be a value of @ref SPI_Clock_Polarity + * @retval None + */ +#define IS_SPI_CPOL(__CPOL__) (((__CPOL__) == SPI_POLARITY_LOW) || \ + ((__CPOL__) == SPI_POLARITY_HIGH)) + +/** @brief Checks if SPI Clock Phase parameter is in allowed range. + * @param __CPHA__ specifies the SPI Clock Phase. + * This parameter can be a value of @ref SPI_Clock_Phase + * @retval None + */ +#define IS_SPI_CPHA(__CPHA__) (((__CPHA__) == SPI_PHASE_1EDGE) || \ + ((__CPHA__) == SPI_PHASE_2EDGE)) + +/** @brief Checks if SPI Slave Select parameter is in allowed range. + * @param __NSS__ specifies the SPI Slave Select management parameter. + * This parameter can be a value of @ref SPI_Slave_Select_management + * @retval None + */ +#define IS_SPI_NSS(__NSS__) (((__NSS__) == SPI_NSS_SOFT) || \ + ((__NSS__) == SPI_NSS_HARD_INPUT) || \ + ((__NSS__) == SPI_NSS_HARD_OUTPUT)) + +/** @brief Checks if SPI NSS Pulse parameter is in allowed range. + * @param __NSSP__ specifies the SPI NSS Pulse Mode parameter. + * This parameter can be a value of @ref SPI_NSSP_Mode + * @retval None + */ +#define IS_SPI_NSSP(__NSSP__) (((__NSSP__) == SPI_NSS_PULSE_ENABLE) || \ + ((__NSSP__) == SPI_NSS_PULSE_DISABLE)) + +/** @brief Checks if SPI Baudrate prescaler parameter is in allowed range. + * @param __PRESCALER__ specifies the SPI Baudrate prescaler. + * This parameter can be a value of @ref SPI_BaudRate_Prescaler + * @retval None + */ +#define IS_SPI_BAUDRATE_PRESCALER(__PRESCALER__) (((__PRESCALER__) == SPI_BAUDRATEPRESCALER_2) || \ + ((__PRESCALER__) == SPI_BAUDRATEPRESCALER_4) || \ + ((__PRESCALER__) == SPI_BAUDRATEPRESCALER_8) || \ + ((__PRESCALER__) == SPI_BAUDRATEPRESCALER_16) || \ + ((__PRESCALER__) == SPI_BAUDRATEPRESCALER_32) || \ + ((__PRESCALER__) == SPI_BAUDRATEPRESCALER_64) || \ + ((__PRESCALER__) == SPI_BAUDRATEPRESCALER_128) || \ + ((__PRESCALER__) == SPI_BAUDRATEPRESCALER_256)) + +/** @brief Checks if SPI MSB LSB transmission parameter is in allowed range. + * @param __BIT__ specifies the SPI MSB LSB transmission (whether data transfer starts from MSB or LSB bit). + * This parameter can be a value of @ref SPI_MSB_LSB_transmission + * @retval None + */ +#define IS_SPI_FIRST_BIT(__BIT__) (((__BIT__) == SPI_FIRSTBIT_MSB) || \ + ((__BIT__) == SPI_FIRSTBIT_LSB)) + +/** @brief Checks if SPI TI mode parameter is in allowed range. + * @param __MODE__ specifies the SPI TI mode. + * This parameter can be a value of @ref SPI_TI_mode + * @retval None + */ +#define IS_SPI_TIMODE(__MODE__) (((__MODE__) == SPI_TIMODE_DISABLE) || \ + ((__MODE__) == SPI_TIMODE_ENABLE)) + +/** @brief Checks if SPI CRC calculation enabled state is in allowed range. + * @param __CALCULATION__ specifies the SPI CRC calculation enable state. + * This parameter can be a value of @ref SPI_CRC_Calculation + * @retval None + */ +#define IS_SPI_CRC_CALCULATION(__CALCULATION__) (((__CALCULATION__) == SPI_CRCCALCULATION_DISABLE) || \ + ((__CALCULATION__) == SPI_CRCCALCULATION_ENABLE)) + +/** @brief Checks if SPI CRC length is in allowed range. + * @param __LENGTH__ specifies the SPI CRC length. + * This parameter can be a value of @ref SPI_CRC_length + * @retval None + */ +#define IS_SPI_CRC_LENGTH(__LENGTH__) (((__LENGTH__) == SPI_CRC_LENGTH_DATASIZE) || \ + ((__LENGTH__) == SPI_CRC_LENGTH_8BIT) || \ + ((__LENGTH__) == SPI_CRC_LENGTH_16BIT)) + +/** @brief Checks if SPI polynomial value to be used for the CRC calculation, is in allowed range. + * @param __POLYNOMIAL__ specifies the SPI polynomial value to be used for the CRC calculation. + * This parameter must be a number between Min_Data = 0 and Max_Data = 65535 + * @retval None + */ +#define IS_SPI_CRC_POLYNOMIAL(__POLYNOMIAL__) (((__POLYNOMIAL__) >= 0x1U) && \ + ((__POLYNOMIAL__) <= 0xFFFFU) && \ + (((__POLYNOMIAL__)&0x1U) != 0U)) + +/** @brief Checks if DMA handle is valid. + * @param __HANDLE__ specifies a DMA Handle. + * @retval None + */ +#define IS_SPI_DMA_HANDLE(__HANDLE__) ((__HANDLE__) != NULL) + +/** + * @} + */ + +/* Include SPI HAL Extended module */ +#include "stm32l4xx_hal_spi_ex.h" + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup SPI_Exported_Functions + * @{ + */ + +/** @addtogroup SPI_Exported_Functions_Group1 + * @{ + */ +/* Initialization/de-initialization functions ********************************/ +HAL_StatusTypeDef HAL_SPI_Init(SPI_HandleTypeDef *hspi); +HAL_StatusTypeDef HAL_SPI_DeInit(SPI_HandleTypeDef *hspi); +void HAL_SPI_MspInit(SPI_HandleTypeDef *hspi); +void HAL_SPI_MspDeInit(SPI_HandleTypeDef *hspi); + +/* Callbacks Register/UnRegister functions ***********************************/ +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) +HAL_StatusTypeDef HAL_SPI_RegisterCallback(SPI_HandleTypeDef *hspi, HAL_SPI_CallbackIDTypeDef CallbackID, + pSPI_CallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_SPI_UnRegisterCallback(SPI_HandleTypeDef *hspi, HAL_SPI_CallbackIDTypeDef CallbackID); +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ +/** + * @} + */ + +/** @addtogroup SPI_Exported_Functions_Group2 + * @{ + */ +/* I/O operation functions ***************************************************/ +HAL_StatusTypeDef HAL_SPI_Transmit(SPI_HandleTypeDef *hspi, const uint8_t *pData, uint16_t Size, uint32_t Timeout); +HAL_StatusTypeDef HAL_SPI_Receive(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size, uint32_t Timeout); +HAL_StatusTypeDef HAL_SPI_TransmitReceive(SPI_HandleTypeDef *hspi, const uint8_t *pTxData, uint8_t *pRxData, + uint16_t Size, uint32_t Timeout); +HAL_StatusTypeDef HAL_SPI_Transmit_IT(SPI_HandleTypeDef *hspi, const uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_SPI_Receive_IT(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_SPI_TransmitReceive_IT(SPI_HandleTypeDef *hspi, const uint8_t *pTxData, uint8_t *pRxData, + uint16_t Size); +HAL_StatusTypeDef HAL_SPI_Transmit_DMA(SPI_HandleTypeDef *hspi, const uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_SPI_Receive_DMA(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_SPI_TransmitReceive_DMA(SPI_HandleTypeDef *hspi, const uint8_t *pTxData, uint8_t *pRxData, + uint16_t Size); +HAL_StatusTypeDef HAL_SPI_DMAPause(SPI_HandleTypeDef *hspi); +HAL_StatusTypeDef HAL_SPI_DMAResume(SPI_HandleTypeDef *hspi); +HAL_StatusTypeDef HAL_SPI_DMAStop(SPI_HandleTypeDef *hspi); +/* Transfer Abort functions */ +HAL_StatusTypeDef HAL_SPI_Abort(SPI_HandleTypeDef *hspi); +HAL_StatusTypeDef HAL_SPI_Abort_IT(SPI_HandleTypeDef *hspi); + +void HAL_SPI_IRQHandler(SPI_HandleTypeDef *hspi); +void HAL_SPI_TxCpltCallback(SPI_HandleTypeDef *hspi); +void HAL_SPI_RxCpltCallback(SPI_HandleTypeDef *hspi); +void HAL_SPI_TxRxCpltCallback(SPI_HandleTypeDef *hspi); +void HAL_SPI_TxHalfCpltCallback(SPI_HandleTypeDef *hspi); +void HAL_SPI_RxHalfCpltCallback(SPI_HandleTypeDef *hspi); +void HAL_SPI_TxRxHalfCpltCallback(SPI_HandleTypeDef *hspi); +void HAL_SPI_ErrorCallback(SPI_HandleTypeDef *hspi); +void HAL_SPI_AbortCpltCallback(SPI_HandleTypeDef *hspi); +/** + * @} + */ + +/** @addtogroup SPI_Exported_Functions_Group3 + * @{ + */ +/* Peripheral State and Error functions ***************************************/ +HAL_SPI_StateTypeDef HAL_SPI_GetState(const SPI_HandleTypeDef *hspi); +uint32_t HAL_SPI_GetError(const SPI_HandleTypeDef *hspi); +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32L4xx_HAL_SPI_H */ + diff --git a/CablePositioning_IAP_V1.0/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_spi_ex.h b/CablePositioning_IAP_V1.0/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_spi_ex.h index 7e28675..d600652 100644 --- a/CablePositioning_IAP_V1.0/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_spi_ex.h +++ b/CablePositioning_IAP_V1.0/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_spi_ex.h @@ -1,73 +1,73 @@ -/** - ****************************************************************************** - * @file stm32l4xx_hal_spi_ex.h - * @author MCD Application Team - * @brief Header file of SPI HAL Extended module. - ****************************************************************************** - * @attention - * - * Copyright (c) 2017 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef STM32L4xx_HAL_SPI_EX_H -#define STM32L4xx_HAL_SPI_EX_H - -#ifdef __cplusplus -extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32l4xx_hal_def.h" - -/** @addtogroup STM32L4xx_HAL_Driver - * @{ - */ - -/** @addtogroup SPIEx - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ -/* Exported constants --------------------------------------------------------*/ -/* Exported macros -----------------------------------------------------------*/ -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup SPIEx_Exported_Functions - * @{ - */ - -/* Initialization and de-initialization functions ****************************/ -/* IO operation functions *****************************************************/ -/** @addtogroup SPIEx_Exported_Functions_Group1 - * @{ - */ -HAL_StatusTypeDef HAL_SPIEx_FlushRxFifo(SPI_HandleTypeDef *hspi); -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /* STM32L4xx_HAL_SPI_EX_H */ - +/** + ****************************************************************************** + * @file stm32l4xx_hal_spi_ex.h + * @author MCD Application Team + * @brief Header file of SPI HAL Extended module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32L4xx_HAL_SPI_EX_H +#define STM32L4xx_HAL_SPI_EX_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l4xx_hal_def.h" + +/** @addtogroup STM32L4xx_HAL_Driver + * @{ + */ + +/** @addtogroup SPIEx + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ +/* Exported macros -----------------------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup SPIEx_Exported_Functions + * @{ + */ + +/* Initialization and de-initialization functions ****************************/ +/* IO operation functions *****************************************************/ +/** @addtogroup SPIEx_Exported_Functions_Group1 + * @{ + */ +HAL_StatusTypeDef HAL_SPIEx_FlushRxFifo(const SPI_HandleTypeDef *hspi); +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32L4xx_HAL_SPI_EX_H */ + diff --git a/CablePositioning_IAP_V1.0/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_tim.h b/CablePositioning_IAP_V1.0/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_tim.h index b4f3f53..571d931 100644 --- a/CablePositioning_IAP_V1.0/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_tim.h +++ b/CablePositioning_IAP_V1.0/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_tim.h @@ -1,2390 +1,2394 @@ -/** - ****************************************************************************** - * @file stm32l4xx_hal_tim.h - * @author MCD Application Team - * @brief Header file of TIM HAL module. - ****************************************************************************** - * @attention - * - * Copyright (c) 2017 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef STM32L4xx_HAL_TIM_H -#define STM32L4xx_HAL_TIM_H - -#ifdef __cplusplus -extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32l4xx_hal_def.h" - -/** @addtogroup STM32L4xx_HAL_Driver - * @{ - */ - -/** @addtogroup TIM - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ -/** @defgroup TIM_Exported_Types TIM Exported Types - * @{ - */ - -/** - * @brief TIM Time base Configuration Structure definition - */ -typedef struct -{ - uint32_t Prescaler; /*!< Specifies the prescaler value used to divide the TIM clock. - This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */ - - uint32_t CounterMode; /*!< Specifies the counter mode. - This parameter can be a value of @ref TIM_Counter_Mode */ - - uint32_t Period; /*!< Specifies the period value to be loaded into the active - Auto-Reload Register at the next update event. - This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF. */ - - uint32_t ClockDivision; /*!< Specifies the clock division. - This parameter can be a value of @ref TIM_ClockDivision */ - - uint32_t RepetitionCounter; /*!< Specifies the repetition counter value. Each time the RCR downcounter - reaches zero, an update event is generated and counting restarts - from the RCR value (N). - This means in PWM mode that (N+1) corresponds to: - - the number of PWM periods in edge-aligned mode - - the number of half PWM period in center-aligned mode - GP timers: this parameter must be a number between Min_Data = 0x00 and - Max_Data = 0xFF. - Advanced timers: this parameter must be a number between Min_Data = 0x0000 and - Max_Data = 0xFFFF. */ - - uint32_t AutoReloadPreload; /*!< Specifies the auto-reload preload. - This parameter can be a value of @ref TIM_AutoReloadPreload */ -} TIM_Base_InitTypeDef; - -/** - * @brief TIM Output Compare Configuration Structure definition - */ -typedef struct -{ - uint32_t OCMode; /*!< Specifies the TIM mode. - This parameter can be a value of @ref TIM_Output_Compare_and_PWM_modes */ - - uint32_t Pulse; /*!< Specifies the pulse value to be loaded into the Capture Compare Register. - This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */ - - uint32_t OCPolarity; /*!< Specifies the output polarity. - This parameter can be a value of @ref TIM_Output_Compare_Polarity */ - - uint32_t OCNPolarity; /*!< Specifies the complementary output polarity. - This parameter can be a value of @ref TIM_Output_Compare_N_Polarity - @note This parameter is valid only for timer instances supporting break feature. */ - - uint32_t OCFastMode; /*!< Specifies the Fast mode state. - This parameter can be a value of @ref TIM_Output_Fast_State - @note This parameter is valid only in PWM1 and PWM2 mode. */ - - - uint32_t OCIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state. - This parameter can be a value of @ref TIM_Output_Compare_Idle_State - @note This parameter is valid only for timer instances supporting break feature. */ - - uint32_t OCNIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state. - This parameter can be a value of @ref TIM_Output_Compare_N_Idle_State - @note This parameter is valid only for timer instances supporting break feature. */ -} TIM_OC_InitTypeDef; - -/** - * @brief TIM One Pulse Mode Configuration Structure definition - */ -typedef struct -{ - uint32_t OCMode; /*!< Specifies the TIM mode. - This parameter can be a value of @ref TIM_Output_Compare_and_PWM_modes */ - - uint32_t Pulse; /*!< Specifies the pulse value to be loaded into the Capture Compare Register. - This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */ - - uint32_t OCPolarity; /*!< Specifies the output polarity. - This parameter can be a value of @ref TIM_Output_Compare_Polarity */ - - uint32_t OCNPolarity; /*!< Specifies the complementary output polarity. - This parameter can be a value of @ref TIM_Output_Compare_N_Polarity - @note This parameter is valid only for timer instances supporting break feature. */ - - uint32_t OCIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state. - This parameter can be a value of @ref TIM_Output_Compare_Idle_State - @note This parameter is valid only for timer instances supporting break feature. */ - - uint32_t OCNIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state. - This parameter can be a value of @ref TIM_Output_Compare_N_Idle_State - @note This parameter is valid only for timer instances supporting break feature. */ - - uint32_t ICPolarity; /*!< Specifies the active edge of the input signal. - This parameter can be a value of @ref TIM_Input_Capture_Polarity */ - - uint32_t ICSelection; /*!< Specifies the input. - This parameter can be a value of @ref TIM_Input_Capture_Selection */ - - uint32_t ICFilter; /*!< Specifies the input capture filter. - This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ -} TIM_OnePulse_InitTypeDef; - -/** - * @brief TIM Input Capture Configuration Structure definition - */ -typedef struct -{ - uint32_t ICPolarity; /*!< Specifies the active edge of the input signal. - This parameter can be a value of @ref TIM_Input_Capture_Polarity */ - - uint32_t ICSelection; /*!< Specifies the input. - This parameter can be a value of @ref TIM_Input_Capture_Selection */ - - uint32_t ICPrescaler; /*!< Specifies the Input Capture Prescaler. - This parameter can be a value of @ref TIM_Input_Capture_Prescaler */ - - uint32_t ICFilter; /*!< Specifies the input capture filter. - This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ -} TIM_IC_InitTypeDef; - -/** - * @brief TIM Encoder Configuration Structure definition - */ -typedef struct -{ - uint32_t EncoderMode; /*!< Specifies the active edge of the input signal. - This parameter can be a value of @ref TIM_Encoder_Mode */ - - uint32_t IC1Polarity; /*!< Specifies the active edge of the input signal. - This parameter can be a value of @ref TIM_Encoder_Input_Polarity */ - - uint32_t IC1Selection; /*!< Specifies the input. - This parameter can be a value of @ref TIM_Input_Capture_Selection */ - - uint32_t IC1Prescaler; /*!< Specifies the Input Capture Prescaler. - This parameter can be a value of @ref TIM_Input_Capture_Prescaler */ - - uint32_t IC1Filter; /*!< Specifies the input capture filter. - This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ - - uint32_t IC2Polarity; /*!< Specifies the active edge of the input signal. - This parameter can be a value of @ref TIM_Encoder_Input_Polarity */ - - uint32_t IC2Selection; /*!< Specifies the input. - This parameter can be a value of @ref TIM_Input_Capture_Selection */ - - uint32_t IC2Prescaler; /*!< Specifies the Input Capture Prescaler. - This parameter can be a value of @ref TIM_Input_Capture_Prescaler */ - - uint32_t IC2Filter; /*!< Specifies the input capture filter. - This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ -} TIM_Encoder_InitTypeDef; - -/** - * @brief Clock Configuration Handle Structure definition - */ -typedef struct -{ - uint32_t ClockSource; /*!< TIM clock sources - This parameter can be a value of @ref TIM_Clock_Source */ - uint32_t ClockPolarity; /*!< TIM clock polarity - This parameter can be a value of @ref TIM_Clock_Polarity */ - uint32_t ClockPrescaler; /*!< TIM clock prescaler - This parameter can be a value of @ref TIM_Clock_Prescaler */ - uint32_t ClockFilter; /*!< TIM clock filter - This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ -} TIM_ClockConfigTypeDef; - -/** - * @brief TIM Clear Input Configuration Handle Structure definition - */ -typedef struct -{ - uint32_t ClearInputState; /*!< TIM clear Input state - This parameter can be ENABLE or DISABLE */ - uint32_t ClearInputSource; /*!< TIM clear Input sources - This parameter can be a value of @ref TIM_ClearInput_Source */ - uint32_t ClearInputPolarity; /*!< TIM Clear Input polarity - This parameter can be a value of @ref TIM_ClearInput_Polarity */ - uint32_t ClearInputPrescaler; /*!< TIM Clear Input prescaler - This parameter must be 0: When OCRef clear feature is used with ETR source, - ETR prescaler must be off */ - uint32_t ClearInputFilter; /*!< TIM Clear Input filter - This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ -} TIM_ClearInputConfigTypeDef; - -/** - * @brief TIM Master configuration Structure definition - * @note Advanced timers provide TRGO2 internal line which is redirected - * to the ADC - */ -typedef struct -{ - uint32_t MasterOutputTrigger; /*!< Trigger output (TRGO) selection - This parameter can be a value of @ref TIM_Master_Mode_Selection */ - uint32_t MasterOutputTrigger2; /*!< Trigger output2 (TRGO2) selection - This parameter can be a value of @ref TIM_Master_Mode_Selection_2 */ - uint32_t MasterSlaveMode; /*!< Master/slave mode selection - This parameter can be a value of @ref TIM_Master_Slave_Mode - @note When the Master/slave mode is enabled, the effect of - an event on the trigger input (TRGI) is delayed to allow a - perfect synchronization between the current timer and its - slaves (through TRGO). It is not mandatory in case of timer - synchronization mode. */ -} TIM_MasterConfigTypeDef; - -/** - * @brief TIM Slave configuration Structure definition - */ -typedef struct -{ - uint32_t SlaveMode; /*!< Slave mode selection - This parameter can be a value of @ref TIM_Slave_Mode */ - uint32_t InputTrigger; /*!< Input Trigger source - This parameter can be a value of @ref TIM_Trigger_Selection */ - uint32_t TriggerPolarity; /*!< Input Trigger polarity - This parameter can be a value of @ref TIM_Trigger_Polarity */ - uint32_t TriggerPrescaler; /*!< Input trigger prescaler - This parameter can be a value of @ref TIM_Trigger_Prescaler */ - uint32_t TriggerFilter; /*!< Input trigger filter - This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ - -} TIM_SlaveConfigTypeDef; - -/** - * @brief TIM Break input(s) and Dead time configuration Structure definition - * @note 2 break inputs can be configured (BKIN and BKIN2) with configurable - * filter and polarity. - */ -typedef struct -{ - uint32_t OffStateRunMode; /*!< TIM off state in run mode, This parameter can be a value of @ref TIM_OSSR_Off_State_Selection_for_Run_mode_state */ - - uint32_t OffStateIDLEMode; /*!< TIM off state in IDLE mode, This parameter can be a value of @ref TIM_OSSI_Off_State_Selection_for_Idle_mode_state */ - - uint32_t LockLevel; /*!< TIM Lock level, This parameter can be a value of @ref TIM_Lock_level */ - - uint32_t DeadTime; /*!< TIM dead Time, This parameter can be a number between Min_Data = 0x00 and Max_Data = 0xFF */ - - uint32_t BreakState; /*!< TIM Break State, This parameter can be a value of @ref TIM_Break_Input_enable_disable */ - - uint32_t BreakPolarity; /*!< TIM Break input polarity, This parameter can be a value of @ref TIM_Break_Polarity */ - - uint32_t BreakFilter; /*!< Specifies the break input filter.This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ - - uint32_t Break2State; /*!< TIM Break2 State, This parameter can be a value of @ref TIM_Break2_Input_enable_disable */ - - uint32_t Break2Polarity; /*!< TIM Break2 input polarity, This parameter can be a value of @ref TIM_Break2_Polarity */ - - uint32_t Break2Filter; /*!< TIM break2 input filter.This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ - - uint32_t AutomaticOutput; /*!< TIM Automatic Output Enable state, This parameter can be a value of @ref TIM_AOE_Bit_Set_Reset */ - -} TIM_BreakDeadTimeConfigTypeDef; - -/** - * @brief HAL State structures definition - */ -typedef enum -{ - HAL_TIM_STATE_RESET = 0x00U, /*!< Peripheral not yet initialized or disabled */ - HAL_TIM_STATE_READY = 0x01U, /*!< Peripheral Initialized and ready for use */ - HAL_TIM_STATE_BUSY = 0x02U, /*!< An internal process is ongoing */ - HAL_TIM_STATE_TIMEOUT = 0x03U, /*!< Timeout state */ - HAL_TIM_STATE_ERROR = 0x04U /*!< Reception process is ongoing */ -} HAL_TIM_StateTypeDef; - -/** - * @brief TIM Channel States definition - */ -typedef enum -{ - HAL_TIM_CHANNEL_STATE_RESET = 0x00U, /*!< TIM Channel initial state */ - HAL_TIM_CHANNEL_STATE_READY = 0x01U, /*!< TIM Channel ready for use */ - HAL_TIM_CHANNEL_STATE_BUSY = 0x02U, /*!< An internal process is ongoing on the TIM channel */ -} HAL_TIM_ChannelStateTypeDef; - -/** - * @brief DMA Burst States definition - */ -typedef enum -{ - HAL_DMA_BURST_STATE_RESET = 0x00U, /*!< DMA Burst initial state */ - HAL_DMA_BURST_STATE_READY = 0x01U, /*!< DMA Burst ready for use */ - HAL_DMA_BURST_STATE_BUSY = 0x02U, /*!< Ongoing DMA Burst */ -} HAL_TIM_DMABurstStateTypeDef; - -/** - * @brief HAL Active channel structures definition - */ -typedef enum -{ - HAL_TIM_ACTIVE_CHANNEL_1 = 0x01U, /*!< The active channel is 1 */ - HAL_TIM_ACTIVE_CHANNEL_2 = 0x02U, /*!< The active channel is 2 */ - HAL_TIM_ACTIVE_CHANNEL_3 = 0x04U, /*!< The active channel is 3 */ - HAL_TIM_ACTIVE_CHANNEL_4 = 0x08U, /*!< The active channel is 4 */ - HAL_TIM_ACTIVE_CHANNEL_5 = 0x10U, /*!< The active channel is 5 */ - HAL_TIM_ACTIVE_CHANNEL_6 = 0x20U, /*!< The active channel is 6 */ - HAL_TIM_ACTIVE_CHANNEL_CLEARED = 0x00U /*!< All active channels cleared */ -} HAL_TIM_ActiveChannel; - -/** - * @brief TIM Time Base Handle Structure definition - */ -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) -typedef struct __TIM_HandleTypeDef -#else -typedef struct -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ -{ - TIM_TypeDef *Instance; /*!< Register base address */ - TIM_Base_InitTypeDef Init; /*!< TIM Time Base required parameters */ - HAL_TIM_ActiveChannel Channel; /*!< Active channel */ - DMA_HandleTypeDef *hdma[7]; /*!< DMA Handlers array - This array is accessed by a @ref DMA_Handle_index */ - HAL_LockTypeDef Lock; /*!< Locking object */ - __IO HAL_TIM_StateTypeDef State; /*!< TIM operation state */ - __IO HAL_TIM_ChannelStateTypeDef ChannelState[6]; /*!< TIM channel operation state */ - __IO HAL_TIM_ChannelStateTypeDef ChannelNState[4]; /*!< TIM complementary channel operation state */ - __IO HAL_TIM_DMABurstStateTypeDef DMABurstState; /*!< DMA burst operation state */ - -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) - void (* Base_MspInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Base Msp Init Callback */ - void (* Base_MspDeInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Base Msp DeInit Callback */ - void (* IC_MspInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM IC Msp Init Callback */ - void (* IC_MspDeInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM IC Msp DeInit Callback */ - void (* OC_MspInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM OC Msp Init Callback */ - void (* OC_MspDeInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM OC Msp DeInit Callback */ - void (* PWM_MspInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM PWM Msp Init Callback */ - void (* PWM_MspDeInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM PWM Msp DeInit Callback */ - void (* OnePulse_MspInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM One Pulse Msp Init Callback */ - void (* OnePulse_MspDeInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM One Pulse Msp DeInit Callback */ - void (* Encoder_MspInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Encoder Msp Init Callback */ - void (* Encoder_MspDeInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Encoder Msp DeInit Callback */ - void (* HallSensor_MspInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Hall Sensor Msp Init Callback */ - void (* HallSensor_MspDeInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Hall Sensor Msp DeInit Callback */ - void (* PeriodElapsedCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Period Elapsed Callback */ - void (* PeriodElapsedHalfCpltCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Period Elapsed half complete Callback */ - void (* TriggerCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Trigger Callback */ - void (* TriggerHalfCpltCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Trigger half complete Callback */ - void (* IC_CaptureCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Input Capture Callback */ - void (* IC_CaptureHalfCpltCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Input Capture half complete Callback */ - void (* OC_DelayElapsedCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Output Compare Delay Elapsed Callback */ - void (* PWM_PulseFinishedCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM PWM Pulse Finished Callback */ - void (* PWM_PulseFinishedHalfCpltCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM PWM Pulse Finished half complete Callback */ - void (* ErrorCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Error Callback */ - void (* CommutationCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Commutation Callback */ - void (* CommutationHalfCpltCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Commutation half complete Callback */ - void (* BreakCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Break Callback */ - void (* Break2Callback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Break2 Callback */ -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ -} TIM_HandleTypeDef; - -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) -/** - * @brief HAL TIM Callback ID enumeration definition - */ -typedef enum -{ - HAL_TIM_BASE_MSPINIT_CB_ID = 0x00U /*!< TIM Base MspInit Callback ID */ - , HAL_TIM_BASE_MSPDEINIT_CB_ID = 0x01U /*!< TIM Base MspDeInit Callback ID */ - , HAL_TIM_IC_MSPINIT_CB_ID = 0x02U /*!< TIM IC MspInit Callback ID */ - , HAL_TIM_IC_MSPDEINIT_CB_ID = 0x03U /*!< TIM IC MspDeInit Callback ID */ - , HAL_TIM_OC_MSPINIT_CB_ID = 0x04U /*!< TIM OC MspInit Callback ID */ - , HAL_TIM_OC_MSPDEINIT_CB_ID = 0x05U /*!< TIM OC MspDeInit Callback ID */ - , HAL_TIM_PWM_MSPINIT_CB_ID = 0x06U /*!< TIM PWM MspInit Callback ID */ - , HAL_TIM_PWM_MSPDEINIT_CB_ID = 0x07U /*!< TIM PWM MspDeInit Callback ID */ - , HAL_TIM_ONE_PULSE_MSPINIT_CB_ID = 0x08U /*!< TIM One Pulse MspInit Callback ID */ - , HAL_TIM_ONE_PULSE_MSPDEINIT_CB_ID = 0x09U /*!< TIM One Pulse MspDeInit Callback ID */ - , HAL_TIM_ENCODER_MSPINIT_CB_ID = 0x0AU /*!< TIM Encoder MspInit Callback ID */ - , HAL_TIM_ENCODER_MSPDEINIT_CB_ID = 0x0BU /*!< TIM Encoder MspDeInit Callback ID */ - , HAL_TIM_HALL_SENSOR_MSPINIT_CB_ID = 0x0CU /*!< TIM Hall Sensor MspDeInit Callback ID */ - , HAL_TIM_HALL_SENSOR_MSPDEINIT_CB_ID = 0x0DU /*!< TIM Hall Sensor MspDeInit Callback ID */ - , HAL_TIM_PERIOD_ELAPSED_CB_ID = 0x0EU /*!< TIM Period Elapsed Callback ID */ - , HAL_TIM_PERIOD_ELAPSED_HALF_CB_ID = 0x0FU /*!< TIM Period Elapsed half complete Callback ID */ - , HAL_TIM_TRIGGER_CB_ID = 0x10U /*!< TIM Trigger Callback ID */ - , HAL_TIM_TRIGGER_HALF_CB_ID = 0x11U /*!< TIM Trigger half complete Callback ID */ - - , HAL_TIM_IC_CAPTURE_CB_ID = 0x12U /*!< TIM Input Capture Callback ID */ - , HAL_TIM_IC_CAPTURE_HALF_CB_ID = 0x13U /*!< TIM Input Capture half complete Callback ID */ - , HAL_TIM_OC_DELAY_ELAPSED_CB_ID = 0x14U /*!< TIM Output Compare Delay Elapsed Callback ID */ - , HAL_TIM_PWM_PULSE_FINISHED_CB_ID = 0x15U /*!< TIM PWM Pulse Finished Callback ID */ - , HAL_TIM_PWM_PULSE_FINISHED_HALF_CB_ID = 0x16U /*!< TIM PWM Pulse Finished half complete Callback ID */ - , HAL_TIM_ERROR_CB_ID = 0x17U /*!< TIM Error Callback ID */ - , HAL_TIM_COMMUTATION_CB_ID = 0x18U /*!< TIM Commutation Callback ID */ - , HAL_TIM_COMMUTATION_HALF_CB_ID = 0x19U /*!< TIM Commutation half complete Callback ID */ - , HAL_TIM_BREAK_CB_ID = 0x1AU /*!< TIM Break Callback ID */ - , HAL_TIM_BREAK2_CB_ID = 0x1BU /*!< TIM Break2 Callback ID */ -} HAL_TIM_CallbackIDTypeDef; - -/** - * @brief HAL TIM Callback pointer definition - */ -typedef void (*pTIM_CallbackTypeDef)(TIM_HandleTypeDef *htim); /*!< pointer to the TIM callback function */ - -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ - -/** - * @} - */ -/* End of exported types -----------------------------------------------------*/ - -/* Exported constants --------------------------------------------------------*/ -/** @defgroup TIM_Exported_Constants TIM Exported Constants - * @{ - */ - -/** @defgroup TIM_ClearInput_Source TIM Clear Input Source - * @{ - */ -#define TIM_CLEARINPUTSOURCE_NONE 0x00000000U /*!< OCREF_CLR is disabled */ -#define TIM_CLEARINPUTSOURCE_ETR 0x00000001U /*!< OCREF_CLR is connected to ETRF input */ -#define TIM_CLEARINPUTSOURCE_OCREFCLR 0x00000002U /*!< OCREF_CLR is connected to OCREF_CLR_INT */ -/** - * @} - */ - -/** @defgroup TIM_DMA_Base_address TIM DMA Base Address - * @{ - */ -#define TIM_DMABASE_CR1 0x00000000U -#define TIM_DMABASE_CR2 0x00000001U -#define TIM_DMABASE_SMCR 0x00000002U -#define TIM_DMABASE_DIER 0x00000003U -#define TIM_DMABASE_SR 0x00000004U -#define TIM_DMABASE_EGR 0x00000005U -#define TIM_DMABASE_CCMR1 0x00000006U -#define TIM_DMABASE_CCMR2 0x00000007U -#define TIM_DMABASE_CCER 0x00000008U -#define TIM_DMABASE_CNT 0x00000009U -#define TIM_DMABASE_PSC 0x0000000AU -#define TIM_DMABASE_ARR 0x0000000BU -#define TIM_DMABASE_RCR 0x0000000CU -#define TIM_DMABASE_CCR1 0x0000000DU -#define TIM_DMABASE_CCR2 0x0000000EU -#define TIM_DMABASE_CCR3 0x0000000FU -#define TIM_DMABASE_CCR4 0x00000010U -#define TIM_DMABASE_BDTR 0x00000011U -#define TIM_DMABASE_DCR 0x00000012U -#define TIM_DMABASE_DMAR 0x00000013U -#define TIM_DMABASE_OR1 0x00000014U -#define TIM_DMABASE_CCMR3 0x00000015U -#define TIM_DMABASE_CCR5 0x00000016U -#define TIM_DMABASE_CCR6 0x00000017U -#define TIM_DMABASE_OR2 0x00000018U -#define TIM_DMABASE_OR3 0x00000019U -/** - * @} - */ - -/** @defgroup TIM_Event_Source TIM Event Source - * @{ - */ -#define TIM_EVENTSOURCE_UPDATE TIM_EGR_UG /*!< Reinitialize the counter and generates an update of the registers */ -#define TIM_EVENTSOURCE_CC1 TIM_EGR_CC1G /*!< A capture/compare event is generated on channel 1 */ -#define TIM_EVENTSOURCE_CC2 TIM_EGR_CC2G /*!< A capture/compare event is generated on channel 2 */ -#define TIM_EVENTSOURCE_CC3 TIM_EGR_CC3G /*!< A capture/compare event is generated on channel 3 */ -#define TIM_EVENTSOURCE_CC4 TIM_EGR_CC4G /*!< A capture/compare event is generated on channel 4 */ -#define TIM_EVENTSOURCE_COM TIM_EGR_COMG /*!< A commutation event is generated */ -#define TIM_EVENTSOURCE_TRIGGER TIM_EGR_TG /*!< A trigger event is generated */ -#define TIM_EVENTSOURCE_BREAK TIM_EGR_BG /*!< A break event is generated */ -#define TIM_EVENTSOURCE_BREAK2 TIM_EGR_B2G /*!< A break 2 event is generated */ -/** - * @} - */ - -/** @defgroup TIM_Input_Channel_Polarity TIM Input Channel polarity - * @{ - */ -#define TIM_INPUTCHANNELPOLARITY_RISING 0x00000000U /*!< Polarity for TIx source */ -#define TIM_INPUTCHANNELPOLARITY_FALLING TIM_CCER_CC1P /*!< Polarity for TIx source */ -#define TIM_INPUTCHANNELPOLARITY_BOTHEDGE (TIM_CCER_CC1P | TIM_CCER_CC1NP) /*!< Polarity for TIx source */ -/** - * @} - */ - -/** @defgroup TIM_ETR_Polarity TIM ETR Polarity - * @{ - */ -#define TIM_ETRPOLARITY_INVERTED TIM_SMCR_ETP /*!< Polarity for ETR source */ -#define TIM_ETRPOLARITY_NONINVERTED 0x00000000U /*!< Polarity for ETR source */ -/** - * @} - */ - -/** @defgroup TIM_ETR_Prescaler TIM ETR Prescaler - * @{ - */ -#define TIM_ETRPRESCALER_DIV1 0x00000000U /*!< No prescaler is used */ -#define TIM_ETRPRESCALER_DIV2 TIM_SMCR_ETPS_0 /*!< ETR input source is divided by 2 */ -#define TIM_ETRPRESCALER_DIV4 TIM_SMCR_ETPS_1 /*!< ETR input source is divided by 4 */ -#define TIM_ETRPRESCALER_DIV8 TIM_SMCR_ETPS /*!< ETR input source is divided by 8 */ -/** - * @} - */ - -/** @defgroup TIM_Counter_Mode TIM Counter Mode - * @{ - */ -#define TIM_COUNTERMODE_UP 0x00000000U /*!< Counter used as up-counter */ -#define TIM_COUNTERMODE_DOWN TIM_CR1_DIR /*!< Counter used as down-counter */ -#define TIM_COUNTERMODE_CENTERALIGNED1 TIM_CR1_CMS_0 /*!< Center-aligned mode 1 */ -#define TIM_COUNTERMODE_CENTERALIGNED2 TIM_CR1_CMS_1 /*!< Center-aligned mode 2 */ -#define TIM_COUNTERMODE_CENTERALIGNED3 TIM_CR1_CMS /*!< Center-aligned mode 3 */ -/** - * @} - */ - -/** @defgroup TIM_Update_Interrupt_Flag_Remap TIM Update Interrupt Flag Remap - * @{ - */ -#define TIM_UIFREMAP_DISABLE 0x00000000U /*!< Update interrupt flag remap disabled */ -#define TIM_UIFREMAP_ENABLE TIM_CR1_UIFREMAP /*!< Update interrupt flag remap enabled */ -/** - * @} - */ - -/** @defgroup TIM_ClockDivision TIM Clock Division - * @{ - */ -#define TIM_CLOCKDIVISION_DIV1 0x00000000U /*!< Clock division: tDTS=tCK_INT */ -#define TIM_CLOCKDIVISION_DIV2 TIM_CR1_CKD_0 /*!< Clock division: tDTS=2*tCK_INT */ -#define TIM_CLOCKDIVISION_DIV4 TIM_CR1_CKD_1 /*!< Clock division: tDTS=4*tCK_INT */ -/** - * @} - */ - -/** @defgroup TIM_Output_Compare_State TIM Output Compare State - * @{ - */ -#define TIM_OUTPUTSTATE_DISABLE 0x00000000U /*!< Capture/Compare 1 output disabled */ -#define TIM_OUTPUTSTATE_ENABLE TIM_CCER_CC1E /*!< Capture/Compare 1 output enabled */ -/** - * @} - */ - -/** @defgroup TIM_AutoReloadPreload TIM Auto-Reload Preload - * @{ - */ -#define TIM_AUTORELOAD_PRELOAD_DISABLE 0x00000000U /*!< TIMx_ARR register is not buffered */ -#define TIM_AUTORELOAD_PRELOAD_ENABLE TIM_CR1_ARPE /*!< TIMx_ARR register is buffered */ - -/** - * @} - */ - -/** @defgroup TIM_Output_Fast_State TIM Output Fast State - * @{ - */ -#define TIM_OCFAST_DISABLE 0x00000000U /*!< Output Compare fast disable */ -#define TIM_OCFAST_ENABLE TIM_CCMR1_OC1FE /*!< Output Compare fast enable */ -/** - * @} - */ - -/** @defgroup TIM_Output_Compare_N_State TIM Complementary Output Compare State - * @{ - */ -#define TIM_OUTPUTNSTATE_DISABLE 0x00000000U /*!< OCxN is disabled */ -#define TIM_OUTPUTNSTATE_ENABLE TIM_CCER_CC1NE /*!< OCxN is enabled */ -/** - * @} - */ - -/** @defgroup TIM_Output_Compare_Polarity TIM Output Compare Polarity - * @{ - */ -#define TIM_OCPOLARITY_HIGH 0x00000000U /*!< Capture/Compare output polarity */ -#define TIM_OCPOLARITY_LOW TIM_CCER_CC1P /*!< Capture/Compare output polarity */ -/** - * @} - */ - -/** @defgroup TIM_Output_Compare_N_Polarity TIM Complementary Output Compare Polarity - * @{ - */ -#define TIM_OCNPOLARITY_HIGH 0x00000000U /*!< Capture/Compare complementary output polarity */ -#define TIM_OCNPOLARITY_LOW TIM_CCER_CC1NP /*!< Capture/Compare complementary output polarity */ -/** - * @} - */ - -/** @defgroup TIM_Output_Compare_Idle_State TIM Output Compare Idle State - * @{ - */ -#define TIM_OCIDLESTATE_SET TIM_CR2_OIS1 /*!< Output Idle state: OCx=1 when MOE=0 */ -#define TIM_OCIDLESTATE_RESET 0x00000000U /*!< Output Idle state: OCx=0 when MOE=0 */ -/** - * @} - */ - -/** @defgroup TIM_Output_Compare_N_Idle_State TIM Complementary Output Compare Idle State - * @{ - */ -#define TIM_OCNIDLESTATE_SET TIM_CR2_OIS1N /*!< Complementary output Idle state: OCxN=1 when MOE=0 */ -#define TIM_OCNIDLESTATE_RESET 0x00000000U /*!< Complementary output Idle state: OCxN=0 when MOE=0 */ -/** - * @} - */ - -/** @defgroup TIM_Input_Capture_Polarity TIM Input Capture Polarity - * @{ - */ -#define TIM_ICPOLARITY_RISING TIM_INPUTCHANNELPOLARITY_RISING /*!< Capture triggered by rising edge on timer input */ -#define TIM_ICPOLARITY_FALLING TIM_INPUTCHANNELPOLARITY_FALLING /*!< Capture triggered by falling edge on timer input */ -#define TIM_ICPOLARITY_BOTHEDGE TIM_INPUTCHANNELPOLARITY_BOTHEDGE /*!< Capture triggered by both rising and falling edges on timer input*/ -/** - * @} - */ - -/** @defgroup TIM_Encoder_Input_Polarity TIM Encoder Input Polarity - * @{ - */ -#define TIM_ENCODERINPUTPOLARITY_RISING TIM_INPUTCHANNELPOLARITY_RISING /*!< Encoder input with rising edge polarity */ -#define TIM_ENCODERINPUTPOLARITY_FALLING TIM_INPUTCHANNELPOLARITY_FALLING /*!< Encoder input with falling edge polarity */ -/** - * @} - */ - -/** @defgroup TIM_Input_Capture_Selection TIM Input Capture Selection - * @{ - */ -#define TIM_ICSELECTION_DIRECTTI TIM_CCMR1_CC1S_0 /*!< TIM Input 1, 2, 3 or 4 is selected to be connected to IC1, IC2, IC3 or IC4, respectively */ -#define TIM_ICSELECTION_INDIRECTTI TIM_CCMR1_CC1S_1 /*!< TIM Input 1, 2, 3 or 4 is selected to be connected to IC2, IC1, IC4 or IC3, respectively */ -#define TIM_ICSELECTION_TRC TIM_CCMR1_CC1S /*!< TIM Input 1, 2, 3 or 4 is selected to be connected to TRC */ -/** - * @} - */ - -/** @defgroup TIM_Input_Capture_Prescaler TIM Input Capture Prescaler - * @{ - */ -#define TIM_ICPSC_DIV1 0x00000000U /*!< Capture performed each time an edge is detected on the capture input */ -#define TIM_ICPSC_DIV2 TIM_CCMR1_IC1PSC_0 /*!< Capture performed once every 2 events */ -#define TIM_ICPSC_DIV4 TIM_CCMR1_IC1PSC_1 /*!< Capture performed once every 4 events */ -#define TIM_ICPSC_DIV8 TIM_CCMR1_IC1PSC /*!< Capture performed once every 8 events */ -/** - * @} - */ - -/** @defgroup TIM_One_Pulse_Mode TIM One Pulse Mode - * @{ - */ -#define TIM_OPMODE_SINGLE TIM_CR1_OPM /*!< Counter stops counting at the next update event */ -#define TIM_OPMODE_REPETITIVE 0x00000000U /*!< Counter is not stopped at update event */ -/** - * @} - */ - -/** @defgroup TIM_Encoder_Mode TIM Encoder Mode - * @{ - */ -#define TIM_ENCODERMODE_TI1 TIM_SMCR_SMS_0 /*!< Quadrature encoder mode 1, x2 mode, counts up/down on TI1FP1 edge depending on TI2FP2 level */ -#define TIM_ENCODERMODE_TI2 TIM_SMCR_SMS_1 /*!< Quadrature encoder mode 2, x2 mode, counts up/down on TI2FP2 edge depending on TI1FP1 level. */ -#define TIM_ENCODERMODE_TI12 (TIM_SMCR_SMS_1 | TIM_SMCR_SMS_0) /*!< Quadrature encoder mode 3, x4 mode, counts up/down on both TI1FP1 and TI2FP2 edges depending on the level of the other input. */ -/** - * @} - */ - -/** @defgroup TIM_Interrupt_definition TIM interrupt Definition - * @{ - */ -#define TIM_IT_UPDATE TIM_DIER_UIE /*!< Update interrupt */ -#define TIM_IT_CC1 TIM_DIER_CC1IE /*!< Capture/Compare 1 interrupt */ -#define TIM_IT_CC2 TIM_DIER_CC2IE /*!< Capture/Compare 2 interrupt */ -#define TIM_IT_CC3 TIM_DIER_CC3IE /*!< Capture/Compare 3 interrupt */ -#define TIM_IT_CC4 TIM_DIER_CC4IE /*!< Capture/Compare 4 interrupt */ -#define TIM_IT_COM TIM_DIER_COMIE /*!< Commutation interrupt */ -#define TIM_IT_TRIGGER TIM_DIER_TIE /*!< Trigger interrupt */ -#define TIM_IT_BREAK TIM_DIER_BIE /*!< Break interrupt */ -/** - * @} - */ - -/** @defgroup TIM_Commutation_Source TIM Commutation Source - * @{ - */ -#define TIM_COMMUTATION_TRGI TIM_CR2_CCUS /*!< When Capture/compare control bits are preloaded, they are updated by setting the COMG bit or when an rising edge occurs on trigger input */ -#define TIM_COMMUTATION_SOFTWARE 0x00000000U /*!< When Capture/compare control bits are preloaded, they are updated by setting the COMG bit */ -/** - * @} - */ - -/** @defgroup TIM_DMA_sources TIM DMA Sources - * @{ - */ -#define TIM_DMA_UPDATE TIM_DIER_UDE /*!< DMA request is triggered by the update event */ -#define TIM_DMA_CC1 TIM_DIER_CC1DE /*!< DMA request is triggered by the capture/compare macth 1 event */ -#define TIM_DMA_CC2 TIM_DIER_CC2DE /*!< DMA request is triggered by the capture/compare macth 2 event event */ -#define TIM_DMA_CC3 TIM_DIER_CC3DE /*!< DMA request is triggered by the capture/compare macth 3 event event */ -#define TIM_DMA_CC4 TIM_DIER_CC4DE /*!< DMA request is triggered by the capture/compare macth 4 event event */ -#define TIM_DMA_COM TIM_DIER_COMDE /*!< DMA request is triggered by the commutation event */ -#define TIM_DMA_TRIGGER TIM_DIER_TDE /*!< DMA request is triggered by the trigger event */ -/** - * @} - */ - -/** @defgroup TIM_CC_DMA_Request CCx DMA request selection - * @{ - */ -#define TIM_CCDMAREQUEST_CC 0x00000000U /*!< CCx DMA request sent when capture or compare match event occurs */ -#define TIM_CCDMAREQUEST_UPDATE TIM_CR2_CCDS /*!< CCx DMA requests sent when update event occurs */ -/** - * @} - */ - -/** @defgroup TIM_Flag_definition TIM Flag Definition - * @{ - */ -#define TIM_FLAG_UPDATE TIM_SR_UIF /*!< Update interrupt flag */ -#define TIM_FLAG_CC1 TIM_SR_CC1IF /*!< Capture/Compare 1 interrupt flag */ -#define TIM_FLAG_CC2 TIM_SR_CC2IF /*!< Capture/Compare 2 interrupt flag */ -#define TIM_FLAG_CC3 TIM_SR_CC3IF /*!< Capture/Compare 3 interrupt flag */ -#define TIM_FLAG_CC4 TIM_SR_CC4IF /*!< Capture/Compare 4 interrupt flag */ -#define TIM_FLAG_CC5 TIM_SR_CC5IF /*!< Capture/Compare 5 interrupt flag */ -#define TIM_FLAG_CC6 TIM_SR_CC6IF /*!< Capture/Compare 6 interrupt flag */ -#define TIM_FLAG_COM TIM_SR_COMIF /*!< Commutation interrupt flag */ -#define TIM_FLAG_TRIGGER TIM_SR_TIF /*!< Trigger interrupt flag */ -#define TIM_FLAG_BREAK TIM_SR_BIF /*!< Break interrupt flag */ -#define TIM_FLAG_BREAK2 TIM_SR_B2IF /*!< Break 2 interrupt flag */ -#define TIM_FLAG_SYSTEM_BREAK TIM_SR_SBIF /*!< System Break interrupt flag */ -#define TIM_FLAG_CC1OF TIM_SR_CC1OF /*!< Capture 1 overcapture flag */ -#define TIM_FLAG_CC2OF TIM_SR_CC2OF /*!< Capture 2 overcapture flag */ -#define TIM_FLAG_CC3OF TIM_SR_CC3OF /*!< Capture 3 overcapture flag */ -#define TIM_FLAG_CC4OF TIM_SR_CC4OF /*!< Capture 4 overcapture flag */ -/** - * @} - */ - -/** @defgroup TIM_Channel TIM Channel - * @{ - */ -#define TIM_CHANNEL_1 0x00000000U /*!< Capture/compare channel 1 identifier */ -#define TIM_CHANNEL_2 0x00000004U /*!< Capture/compare channel 2 identifier */ -#define TIM_CHANNEL_3 0x00000008U /*!< Capture/compare channel 3 identifier */ -#define TIM_CHANNEL_4 0x0000000CU /*!< Capture/compare channel 4 identifier */ -#define TIM_CHANNEL_5 0x00000010U /*!< Compare channel 5 identifier */ -#define TIM_CHANNEL_6 0x00000014U /*!< Compare channel 6 identifier */ -#define TIM_CHANNEL_ALL 0x0000003CU /*!< Global Capture/compare channel identifier */ -/** - * @} - */ - -/** @defgroup TIM_Clock_Source TIM Clock Source - * @{ - */ -#define TIM_CLOCKSOURCE_INTERNAL TIM_SMCR_ETPS_0 /*!< Internal clock source */ -#define TIM_CLOCKSOURCE_ETRMODE1 TIM_TS_ETRF /*!< External clock source mode 1 (ETRF) */ -#define TIM_CLOCKSOURCE_ETRMODE2 TIM_SMCR_ETPS_1 /*!< External clock source mode 2 */ -#define TIM_CLOCKSOURCE_TI1ED TIM_TS_TI1F_ED /*!< External clock source mode 1 (TTI1FP1 + edge detect.) */ -#define TIM_CLOCKSOURCE_TI1 TIM_TS_TI1FP1 /*!< External clock source mode 1 (TTI1FP1) */ -#define TIM_CLOCKSOURCE_TI2 TIM_TS_TI2FP2 /*!< External clock source mode 1 (TTI2FP2) */ -#define TIM_CLOCKSOURCE_ITR0 TIM_TS_ITR0 /*!< External clock source mode 1 (ITR0) */ -#define TIM_CLOCKSOURCE_ITR1 TIM_TS_ITR1 /*!< External clock source mode 1 (ITR1) */ -#define TIM_CLOCKSOURCE_ITR2 TIM_TS_ITR2 /*!< External clock source mode 1 (ITR2) */ -#define TIM_CLOCKSOURCE_ITR3 TIM_TS_ITR3 /*!< External clock source mode 1 (ITR3) */ -/** - * @} - */ - -/** @defgroup TIM_Clock_Polarity TIM Clock Polarity - * @{ - */ -#define TIM_CLOCKPOLARITY_INVERTED TIM_ETRPOLARITY_INVERTED /*!< Polarity for ETRx clock sources */ -#define TIM_CLOCKPOLARITY_NONINVERTED TIM_ETRPOLARITY_NONINVERTED /*!< Polarity for ETRx clock sources */ -#define TIM_CLOCKPOLARITY_RISING TIM_INPUTCHANNELPOLARITY_RISING /*!< Polarity for TIx clock sources */ -#define TIM_CLOCKPOLARITY_FALLING TIM_INPUTCHANNELPOLARITY_FALLING /*!< Polarity for TIx clock sources */ -#define TIM_CLOCKPOLARITY_BOTHEDGE TIM_INPUTCHANNELPOLARITY_BOTHEDGE /*!< Polarity for TIx clock sources */ -/** - * @} - */ - -/** @defgroup TIM_Clock_Prescaler TIM Clock Prescaler - * @{ - */ -#define TIM_CLOCKPRESCALER_DIV1 TIM_ETRPRESCALER_DIV1 /*!< No prescaler is used */ -#define TIM_CLOCKPRESCALER_DIV2 TIM_ETRPRESCALER_DIV2 /*!< Prescaler for External ETR Clock: Capture performed once every 2 events. */ -#define TIM_CLOCKPRESCALER_DIV4 TIM_ETRPRESCALER_DIV4 /*!< Prescaler for External ETR Clock: Capture performed once every 4 events. */ -#define TIM_CLOCKPRESCALER_DIV8 TIM_ETRPRESCALER_DIV8 /*!< Prescaler for External ETR Clock: Capture performed once every 8 events. */ -/** - * @} - */ - -/** @defgroup TIM_ClearInput_Polarity TIM Clear Input Polarity - * @{ - */ -#define TIM_CLEARINPUTPOLARITY_INVERTED TIM_ETRPOLARITY_INVERTED /*!< Polarity for ETRx pin */ -#define TIM_CLEARINPUTPOLARITY_NONINVERTED TIM_ETRPOLARITY_NONINVERTED /*!< Polarity for ETRx pin */ -/** - * @} - */ - -/** @defgroup TIM_ClearInput_Prescaler TIM Clear Input Prescaler - * @{ - */ -#define TIM_CLEARINPUTPRESCALER_DIV1 TIM_ETRPRESCALER_DIV1 /*!< No prescaler is used */ -#define TIM_CLEARINPUTPRESCALER_DIV2 TIM_ETRPRESCALER_DIV2 /*!< Prescaler for External ETR pin: Capture performed once every 2 events. */ -#define TIM_CLEARINPUTPRESCALER_DIV4 TIM_ETRPRESCALER_DIV4 /*!< Prescaler for External ETR pin: Capture performed once every 4 events. */ -#define TIM_CLEARINPUTPRESCALER_DIV8 TIM_ETRPRESCALER_DIV8 /*!< Prescaler for External ETR pin: Capture performed once every 8 events. */ -/** - * @} - */ - -/** @defgroup TIM_OSSR_Off_State_Selection_for_Run_mode_state TIM OSSR OffState Selection for Run mode state - * @{ - */ -#define TIM_OSSR_ENABLE TIM_BDTR_OSSR /*!< When inactive, OC/OCN outputs are enabled (still controlled by the timer) */ -#define TIM_OSSR_DISABLE 0x00000000U /*!< When inactive, OC/OCN outputs are disabled (not controlled any longer by the timer) */ -/** - * @} - */ - -/** @defgroup TIM_OSSI_Off_State_Selection_for_Idle_mode_state TIM OSSI OffState Selection for Idle mode state - * @{ - */ -#define TIM_OSSI_ENABLE TIM_BDTR_OSSI /*!< When inactive, OC/OCN outputs are enabled (still controlled by the timer) */ -#define TIM_OSSI_DISABLE 0x00000000U /*!< When inactive, OC/OCN outputs are disabled (not controlled any longer by the timer) */ -/** - * @} - */ -/** @defgroup TIM_Lock_level TIM Lock level - * @{ - */ -#define TIM_LOCKLEVEL_OFF 0x00000000U /*!< LOCK OFF */ -#define TIM_LOCKLEVEL_1 TIM_BDTR_LOCK_0 /*!< LOCK Level 1 */ -#define TIM_LOCKLEVEL_2 TIM_BDTR_LOCK_1 /*!< LOCK Level 2 */ -#define TIM_LOCKLEVEL_3 TIM_BDTR_LOCK /*!< LOCK Level 3 */ -/** - * @} - */ - -/** @defgroup TIM_Break_Input_enable_disable TIM Break Input Enable - * @{ - */ -#define TIM_BREAK_ENABLE TIM_BDTR_BKE /*!< Break input BRK is enabled */ -#define TIM_BREAK_DISABLE 0x00000000U /*!< Break input BRK is disabled */ -/** - * @} - */ - -/** @defgroup TIM_Break_Polarity TIM Break Input Polarity - * @{ - */ -#define TIM_BREAKPOLARITY_LOW 0x00000000U /*!< Break input BRK is active low */ -#define TIM_BREAKPOLARITY_HIGH TIM_BDTR_BKP /*!< Break input BRK is active high */ -/** - * @} - */ - -/** @defgroup TIM_Break2_Input_enable_disable TIM Break input 2 Enable - * @{ - */ -#define TIM_BREAK2_DISABLE 0x00000000U /*!< Break input BRK2 is disabled */ -#define TIM_BREAK2_ENABLE TIM_BDTR_BK2E /*!< Break input BRK2 is enabled */ -/** - * @} - */ - -/** @defgroup TIM_Break2_Polarity TIM Break Input 2 Polarity - * @{ - */ -#define TIM_BREAK2POLARITY_LOW 0x00000000U /*!< Break input BRK2 is active low */ -#define TIM_BREAK2POLARITY_HIGH TIM_BDTR_BK2P /*!< Break input BRK2 is active high */ -/** - * @} - */ - -/** @defgroup TIM_AOE_Bit_Set_Reset TIM Automatic Output Enable - * @{ - */ -#define TIM_AUTOMATICOUTPUT_DISABLE 0x00000000U /*!< MOE can be set only by software */ -#define TIM_AUTOMATICOUTPUT_ENABLE TIM_BDTR_AOE /*!< MOE can be set by software or automatically at the next update event (if none of the break inputs BRK and BRK2 is active) */ -/** - * @} - */ - -/** @defgroup TIM_Group_Channel5 TIM Group Channel 5 and Channel 1, 2 or 3 - * @{ - */ -#define TIM_GROUPCH5_NONE 0x00000000U /*!< No effect of OC5REF on OC1REFC, OC2REFC and OC3REFC */ -#define TIM_GROUPCH5_OC1REFC TIM_CCR5_GC5C1 /*!< OC1REFC is the logical AND of OC1REFC and OC5REF */ -#define TIM_GROUPCH5_OC2REFC TIM_CCR5_GC5C2 /*!< OC2REFC is the logical AND of OC2REFC and OC5REF */ -#define TIM_GROUPCH5_OC3REFC TIM_CCR5_GC5C3 /*!< OC3REFC is the logical AND of OC3REFC and OC5REF */ -/** - * @} - */ - -/** @defgroup TIM_Master_Mode_Selection TIM Master Mode Selection - * @{ - */ -#define TIM_TRGO_RESET 0x00000000U /*!< TIMx_EGR.UG bit is used as trigger output (TRGO) */ -#define TIM_TRGO_ENABLE TIM_CR2_MMS_0 /*!< TIMx_CR1.CEN bit is used as trigger output (TRGO) */ -#define TIM_TRGO_UPDATE TIM_CR2_MMS_1 /*!< Update event is used as trigger output (TRGO) */ -#define TIM_TRGO_OC1 (TIM_CR2_MMS_1 | TIM_CR2_MMS_0) /*!< Capture or a compare match 1 is used as trigger output (TRGO) */ -#define TIM_TRGO_OC1REF TIM_CR2_MMS_2 /*!< OC1REF signal is used as trigger output (TRGO) */ -#define TIM_TRGO_OC2REF (TIM_CR2_MMS_2 | TIM_CR2_MMS_0) /*!< OC2REF signal is used as trigger output(TRGO) */ -#define TIM_TRGO_OC3REF (TIM_CR2_MMS_2 | TIM_CR2_MMS_1) /*!< OC3REF signal is used as trigger output(TRGO) */ -#define TIM_TRGO_OC4REF (TIM_CR2_MMS_2 | TIM_CR2_MMS_1 | TIM_CR2_MMS_0) /*!< OC4REF signal is used as trigger output(TRGO) */ -/** - * @} - */ - -/** @defgroup TIM_Master_Mode_Selection_2 TIM Master Mode Selection 2 (TRGO2) - * @{ - */ -#define TIM_TRGO2_RESET 0x00000000U /*!< TIMx_EGR.UG bit is used as trigger output (TRGO2) */ -#define TIM_TRGO2_ENABLE TIM_CR2_MMS2_0 /*!< TIMx_CR1.CEN bit is used as trigger output (TRGO2) */ -#define TIM_TRGO2_UPDATE TIM_CR2_MMS2_1 /*!< Update event is used as trigger output (TRGO2) */ -#define TIM_TRGO2_OC1 (TIM_CR2_MMS2_1 | TIM_CR2_MMS2_0) /*!< Capture or a compare match 1 is used as trigger output (TRGO2) */ -#define TIM_TRGO2_OC1REF TIM_CR2_MMS2_2 /*!< OC1REF signal is used as trigger output (TRGO2) */ -#define TIM_TRGO2_OC2REF (TIM_CR2_MMS2_2 | TIM_CR2_MMS2_0) /*!< OC2REF signal is used as trigger output (TRGO2) */ -#define TIM_TRGO2_OC3REF (TIM_CR2_MMS2_2 | TIM_CR2_MMS2_1) /*!< OC3REF signal is used as trigger output (TRGO2) */ -#define TIM_TRGO2_OC4REF (TIM_CR2_MMS2_2 | TIM_CR2_MMS2_1 | TIM_CR2_MMS2_0) /*!< OC4REF signal is used as trigger output (TRGO2) */ -#define TIM_TRGO2_OC5REF TIM_CR2_MMS2_3 /*!< OC5REF signal is used as trigger output (TRGO2) */ -#define TIM_TRGO2_OC6REF (TIM_CR2_MMS2_3 | TIM_CR2_MMS2_0) /*!< OC6REF signal is used as trigger output (TRGO2) */ -#define TIM_TRGO2_OC4REF_RISINGFALLING (TIM_CR2_MMS2_3 | TIM_CR2_MMS2_1) /*!< OC4REF rising or falling edges generate pulses on TRGO2 */ -#define TIM_TRGO2_OC6REF_RISINGFALLING (TIM_CR2_MMS2_3 | TIM_CR2_MMS2_1 | TIM_CR2_MMS2_0) /*!< OC6REF rising or falling edges generate pulses on TRGO2 */ -#define TIM_TRGO2_OC4REF_RISING_OC6REF_RISING (TIM_CR2_MMS2_3 | TIM_CR2_MMS2_2) /*!< OC4REF or OC6REF rising edges generate pulses on TRGO2 */ -#define TIM_TRGO2_OC4REF_RISING_OC6REF_FALLING (TIM_CR2_MMS2_3 | TIM_CR2_MMS2_2 | TIM_CR2_MMS2_0) /*!< OC4REF rising or OC6REF falling edges generate pulses on TRGO2 */ -#define TIM_TRGO2_OC5REF_RISING_OC6REF_RISING (TIM_CR2_MMS2_3 | TIM_CR2_MMS2_2 |TIM_CR2_MMS2_1) /*!< OC5REF or OC6REF rising edges generate pulses on TRGO2 */ -#define TIM_TRGO2_OC5REF_RISING_OC6REF_FALLING (TIM_CR2_MMS2_3 | TIM_CR2_MMS2_2 | TIM_CR2_MMS2_1 | TIM_CR2_MMS2_0) /*!< OC5REF or OC6REF rising edges generate pulses on TRGO2 */ -/** - * @} - */ - -/** @defgroup TIM_Master_Slave_Mode TIM Master/Slave Mode - * @{ - */ -#define TIM_MASTERSLAVEMODE_ENABLE TIM_SMCR_MSM /*!< No action */ -#define TIM_MASTERSLAVEMODE_DISABLE 0x00000000U /*!< Master/slave mode is selected */ -/** - * @} - */ - -/** @defgroup TIM_Slave_Mode TIM Slave mode - * @{ - */ -#define TIM_SLAVEMODE_DISABLE 0x00000000U /*!< Slave mode disabled */ -#define TIM_SLAVEMODE_RESET TIM_SMCR_SMS_2 /*!< Reset Mode */ -#define TIM_SLAVEMODE_GATED (TIM_SMCR_SMS_2 | TIM_SMCR_SMS_0) /*!< Gated Mode */ -#define TIM_SLAVEMODE_TRIGGER (TIM_SMCR_SMS_2 | TIM_SMCR_SMS_1) /*!< Trigger Mode */ -#define TIM_SLAVEMODE_EXTERNAL1 (TIM_SMCR_SMS_2 | TIM_SMCR_SMS_1 | TIM_SMCR_SMS_0) /*!< External Clock Mode 1 */ -#define TIM_SLAVEMODE_COMBINED_RESETTRIGGER TIM_SMCR_SMS_3 /*!< Combined reset + trigger mode */ -/** - * @} - */ - -/** @defgroup TIM_Output_Compare_and_PWM_modes TIM Output Compare and PWM Modes - * @{ - */ -#define TIM_OCMODE_TIMING 0x00000000U /*!< Frozen */ -#define TIM_OCMODE_ACTIVE TIM_CCMR1_OC1M_0 /*!< Set channel to active level on match */ -#define TIM_OCMODE_INACTIVE TIM_CCMR1_OC1M_1 /*!< Set channel to inactive level on match */ -#define TIM_OCMODE_TOGGLE (TIM_CCMR1_OC1M_1 | TIM_CCMR1_OC1M_0) /*!< Toggle */ -#define TIM_OCMODE_PWM1 (TIM_CCMR1_OC1M_2 | TIM_CCMR1_OC1M_1) /*!< PWM mode 1 */ -#define TIM_OCMODE_PWM2 (TIM_CCMR1_OC1M_2 | TIM_CCMR1_OC1M_1 | TIM_CCMR1_OC1M_0) /*!< PWM mode 2 */ -#define TIM_OCMODE_FORCED_ACTIVE (TIM_CCMR1_OC1M_2 | TIM_CCMR1_OC1M_0) /*!< Force active level */ -#define TIM_OCMODE_FORCED_INACTIVE TIM_CCMR1_OC1M_2 /*!< Force inactive level */ -#define TIM_OCMODE_RETRIGERRABLE_OPM1 TIM_CCMR1_OC1M_3 /*!< Retrigerrable OPM mode 1 */ -#define TIM_OCMODE_RETRIGERRABLE_OPM2 (TIM_CCMR1_OC1M_3 | TIM_CCMR1_OC1M_0) /*!< Retrigerrable OPM mode 2 */ -#define TIM_OCMODE_COMBINED_PWM1 (TIM_CCMR1_OC1M_3 | TIM_CCMR1_OC1M_2) /*!< Combined PWM mode 1 */ -#define TIM_OCMODE_COMBINED_PWM2 (TIM_CCMR1_OC1M_3 | TIM_CCMR1_OC1M_0 | TIM_CCMR1_OC1M_2) /*!< Combined PWM mode 2 */ -#define TIM_OCMODE_ASSYMETRIC_PWM1 (TIM_CCMR1_OC1M_3 | TIM_CCMR1_OC1M_1 | TIM_CCMR1_OC1M_2) /*!< Asymmetric PWM mode 1 */ -#define TIM_OCMODE_ASSYMETRIC_PWM2 TIM_CCMR1_OC1M /*!< Asymmetric PWM mode 2 */ -/** - * @} - */ - -/** @defgroup TIM_Trigger_Selection TIM Trigger Selection - * @{ - */ -#define TIM_TS_ITR0 0x00000000U /*!< Internal Trigger 0 (ITR0) */ -#define TIM_TS_ITR1 TIM_SMCR_TS_0 /*!< Internal Trigger 1 (ITR1) */ -#define TIM_TS_ITR2 TIM_SMCR_TS_1 /*!< Internal Trigger 2 (ITR2) */ -#define TIM_TS_ITR3 (TIM_SMCR_TS_0 | TIM_SMCR_TS_1) /*!< Internal Trigger 3 (ITR3) */ -#define TIM_TS_TI1F_ED TIM_SMCR_TS_2 /*!< TI1 Edge Detector (TI1F_ED) */ -#define TIM_TS_TI1FP1 (TIM_SMCR_TS_0 | TIM_SMCR_TS_2) /*!< Filtered Timer Input 1 (TI1FP1) */ -#define TIM_TS_TI2FP2 (TIM_SMCR_TS_1 | TIM_SMCR_TS_2) /*!< Filtered Timer Input 2 (TI2FP2) */ -#define TIM_TS_ETRF (TIM_SMCR_TS_0 | TIM_SMCR_TS_1 | TIM_SMCR_TS_2) /*!< Filtered External Trigger input (ETRF) */ -#define TIM_TS_NONE 0x0000FFFFU /*!< No trigger selected */ -/** - * @} - */ - -/** @defgroup TIM_Trigger_Polarity TIM Trigger Polarity - * @{ - */ -#define TIM_TRIGGERPOLARITY_INVERTED TIM_ETRPOLARITY_INVERTED /*!< Polarity for ETRx trigger sources */ -#define TIM_TRIGGERPOLARITY_NONINVERTED TIM_ETRPOLARITY_NONINVERTED /*!< Polarity for ETRx trigger sources */ -#define TIM_TRIGGERPOLARITY_RISING TIM_INPUTCHANNELPOLARITY_RISING /*!< Polarity for TIxFPx or TI1_ED trigger sources */ -#define TIM_TRIGGERPOLARITY_FALLING TIM_INPUTCHANNELPOLARITY_FALLING /*!< Polarity for TIxFPx or TI1_ED trigger sources */ -#define TIM_TRIGGERPOLARITY_BOTHEDGE TIM_INPUTCHANNELPOLARITY_BOTHEDGE /*!< Polarity for TIxFPx or TI1_ED trigger sources */ -/** - * @} - */ - -/** @defgroup TIM_Trigger_Prescaler TIM Trigger Prescaler - * @{ - */ -#define TIM_TRIGGERPRESCALER_DIV1 TIM_ETRPRESCALER_DIV1 /*!< No prescaler is used */ -#define TIM_TRIGGERPRESCALER_DIV2 TIM_ETRPRESCALER_DIV2 /*!< Prescaler for External ETR Trigger: Capture performed once every 2 events. */ -#define TIM_TRIGGERPRESCALER_DIV4 TIM_ETRPRESCALER_DIV4 /*!< Prescaler for External ETR Trigger: Capture performed once every 4 events. */ -#define TIM_TRIGGERPRESCALER_DIV8 TIM_ETRPRESCALER_DIV8 /*!< Prescaler for External ETR Trigger: Capture performed once every 8 events. */ -/** - * @} - */ - -/** @defgroup TIM_TI1_Selection TIM TI1 Input Selection - * @{ - */ -#define TIM_TI1SELECTION_CH1 0x00000000U /*!< The TIMx_CH1 pin is connected to TI1 input */ -#define TIM_TI1SELECTION_XORCOMBINATION TIM_CR2_TI1S /*!< The TIMx_CH1, CH2 and CH3 pins are connected to the TI1 input (XOR combination) */ -/** - * @} - */ - -/** @defgroup TIM_DMA_Burst_Length TIM DMA Burst Length - * @{ - */ -#define TIM_DMABURSTLENGTH_1TRANSFER 0x00000000U /*!< The transfer is done to 1 register starting from TIMx_CR1 + TIMx_DCR.DBA */ -#define TIM_DMABURSTLENGTH_2TRANSFERS 0x00000100U /*!< The transfer is done to 2 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ -#define TIM_DMABURSTLENGTH_3TRANSFERS 0x00000200U /*!< The transfer is done to 3 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ -#define TIM_DMABURSTLENGTH_4TRANSFERS 0x00000300U /*!< The transfer is done to 4 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ -#define TIM_DMABURSTLENGTH_5TRANSFERS 0x00000400U /*!< The transfer is done to 5 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ -#define TIM_DMABURSTLENGTH_6TRANSFERS 0x00000500U /*!< The transfer is done to 6 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ -#define TIM_DMABURSTLENGTH_7TRANSFERS 0x00000600U /*!< The transfer is done to 7 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ -#define TIM_DMABURSTLENGTH_8TRANSFERS 0x00000700U /*!< The transfer is done to 8 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ -#define TIM_DMABURSTLENGTH_9TRANSFERS 0x00000800U /*!< The transfer is done to 9 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ -#define TIM_DMABURSTLENGTH_10TRANSFERS 0x00000900U /*!< The transfer is done to 10 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ -#define TIM_DMABURSTLENGTH_11TRANSFERS 0x00000A00U /*!< The transfer is done to 11 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ -#define TIM_DMABURSTLENGTH_12TRANSFERS 0x00000B00U /*!< The transfer is done to 12 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ -#define TIM_DMABURSTLENGTH_13TRANSFERS 0x00000C00U /*!< The transfer is done to 13 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ -#define TIM_DMABURSTLENGTH_14TRANSFERS 0x00000D00U /*!< The transfer is done to 14 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ -#define TIM_DMABURSTLENGTH_15TRANSFERS 0x00000E00U /*!< The transfer is done to 15 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ -#define TIM_DMABURSTLENGTH_16TRANSFERS 0x00000F00U /*!< The transfer is done to 16 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ -#define TIM_DMABURSTLENGTH_17TRANSFERS 0x00001000U /*!< The transfer is done to 17 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ -#define TIM_DMABURSTLENGTH_18TRANSFERS 0x00001100U /*!< The transfer is done to 18 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ -/** - * @} - */ - -/** @defgroup DMA_Handle_index TIM DMA Handle Index - * @{ - */ -#define TIM_DMA_ID_UPDATE ((uint16_t) 0x0000) /*!< Index of the DMA handle used for Update DMA requests */ -#define TIM_DMA_ID_CC1 ((uint16_t) 0x0001) /*!< Index of the DMA handle used for Capture/Compare 1 DMA requests */ -#define TIM_DMA_ID_CC2 ((uint16_t) 0x0002) /*!< Index of the DMA handle used for Capture/Compare 2 DMA requests */ -#define TIM_DMA_ID_CC3 ((uint16_t) 0x0003) /*!< Index of the DMA handle used for Capture/Compare 3 DMA requests */ -#define TIM_DMA_ID_CC4 ((uint16_t) 0x0004) /*!< Index of the DMA handle used for Capture/Compare 4 DMA requests */ -#define TIM_DMA_ID_COMMUTATION ((uint16_t) 0x0005) /*!< Index of the DMA handle used for Commutation DMA requests */ -#define TIM_DMA_ID_TRIGGER ((uint16_t) 0x0006) /*!< Index of the DMA handle used for Trigger DMA requests */ -/** - * @} - */ - -/** @defgroup Channel_CC_State TIM Capture/Compare Channel State - * @{ - */ -#define TIM_CCx_ENABLE 0x00000001U /*!< Input or output channel is enabled */ -#define TIM_CCx_DISABLE 0x00000000U /*!< Input or output channel is disabled */ -#define TIM_CCxN_ENABLE 0x00000004U /*!< Complementary output channel is enabled */ -#define TIM_CCxN_DISABLE 0x00000000U /*!< Complementary output channel is enabled */ -/** - * @} - */ - -/** @defgroup TIM_Break_System TIM Break System - * @{ - */ -#define TIM_BREAK_SYSTEM_ECC SYSCFG_CFGR2_ECCL /*!< Enables and locks the ECC error signal with Break Input of TIM1/8/15/16/17 */ -#define TIM_BREAK_SYSTEM_PVD SYSCFG_CFGR2_PVDL /*!< Enables and locks the PVD connection with TIM1/8/15/16/17 Break Input and also the PVDE and PLS bits of the Power Control Interface */ -#define TIM_BREAK_SYSTEM_SRAM2_PARITY_ERROR SYSCFG_CFGR2_SPL /*!< Enables and locks the SRAM2_PARITY error signal with Break Input of TIM1/8/15/16/17 */ -#define TIM_BREAK_SYSTEM_LOCKUP SYSCFG_CFGR2_CLL /*!< Enables and locks the LOCKUP output of CortexM4 with Break Input of TIM1/8/15/16/17 */ -/** - * @} - */ - -/** - * @} - */ -/* End of exported constants -------------------------------------------------*/ - -/* Exported macros -----------------------------------------------------------*/ -/** @defgroup TIM_Exported_Macros TIM Exported Macros - * @{ - */ - -/** @brief Reset TIM handle state. - * @param __HANDLE__ TIM handle. - * @retval None - */ -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) -#define __HAL_TIM_RESET_HANDLE_STATE(__HANDLE__) do { \ - (__HANDLE__)->State = HAL_TIM_STATE_RESET; \ - (__HANDLE__)->ChannelState[0] = HAL_TIM_CHANNEL_STATE_RESET; \ - (__HANDLE__)->ChannelState[1] = HAL_TIM_CHANNEL_STATE_RESET; \ - (__HANDLE__)->ChannelState[2] = HAL_TIM_CHANNEL_STATE_RESET; \ - (__HANDLE__)->ChannelState[3] = HAL_TIM_CHANNEL_STATE_RESET; \ - (__HANDLE__)->ChannelState[4] = HAL_TIM_CHANNEL_STATE_RESET; \ - (__HANDLE__)->ChannelState[5] = HAL_TIM_CHANNEL_STATE_RESET; \ - (__HANDLE__)->ChannelNState[0] = HAL_TIM_CHANNEL_STATE_RESET; \ - (__HANDLE__)->ChannelNState[1] = HAL_TIM_CHANNEL_STATE_RESET; \ - (__HANDLE__)->ChannelNState[2] = HAL_TIM_CHANNEL_STATE_RESET; \ - (__HANDLE__)->ChannelNState[3] = HAL_TIM_CHANNEL_STATE_RESET; \ - (__HANDLE__)->DMABurstState = HAL_DMA_BURST_STATE_RESET; \ - (__HANDLE__)->Base_MspInitCallback = NULL; \ - (__HANDLE__)->Base_MspDeInitCallback = NULL; \ - (__HANDLE__)->IC_MspInitCallback = NULL; \ - (__HANDLE__)->IC_MspDeInitCallback = NULL; \ - (__HANDLE__)->OC_MspInitCallback = NULL; \ - (__HANDLE__)->OC_MspDeInitCallback = NULL; \ - (__HANDLE__)->PWM_MspInitCallback = NULL; \ - (__HANDLE__)->PWM_MspDeInitCallback = NULL; \ - (__HANDLE__)->OnePulse_MspInitCallback = NULL; \ - (__HANDLE__)->OnePulse_MspDeInitCallback = NULL; \ - (__HANDLE__)->Encoder_MspInitCallback = NULL; \ - (__HANDLE__)->Encoder_MspDeInitCallback = NULL; \ - (__HANDLE__)->HallSensor_MspInitCallback = NULL; \ - (__HANDLE__)->HallSensor_MspDeInitCallback = NULL; \ - } while(0) -#else -#define __HAL_TIM_RESET_HANDLE_STATE(__HANDLE__) do { \ - (__HANDLE__)->State = HAL_TIM_STATE_RESET; \ - (__HANDLE__)->ChannelState[0] = HAL_TIM_CHANNEL_STATE_RESET; \ - (__HANDLE__)->ChannelState[1] = HAL_TIM_CHANNEL_STATE_RESET; \ - (__HANDLE__)->ChannelState[2] = HAL_TIM_CHANNEL_STATE_RESET; \ - (__HANDLE__)->ChannelState[3] = HAL_TIM_CHANNEL_STATE_RESET; \ - (__HANDLE__)->ChannelState[4] = HAL_TIM_CHANNEL_STATE_RESET; \ - (__HANDLE__)->ChannelState[5] = HAL_TIM_CHANNEL_STATE_RESET; \ - (__HANDLE__)->ChannelNState[0] = HAL_TIM_CHANNEL_STATE_RESET; \ - (__HANDLE__)->ChannelNState[1] = HAL_TIM_CHANNEL_STATE_RESET; \ - (__HANDLE__)->ChannelNState[2] = HAL_TIM_CHANNEL_STATE_RESET; \ - (__HANDLE__)->ChannelNState[3] = HAL_TIM_CHANNEL_STATE_RESET; \ - (__HANDLE__)->DMABurstState = HAL_DMA_BURST_STATE_RESET; \ - } while(0) -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ - -/** - * @brief Enable the TIM peripheral. - * @param __HANDLE__ TIM handle - * @retval None - */ -#define __HAL_TIM_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1|=(TIM_CR1_CEN)) - -/** - * @brief Enable the TIM main Output. - * @param __HANDLE__ TIM handle - * @retval None - */ -#define __HAL_TIM_MOE_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->BDTR|=(TIM_BDTR_MOE)) - -/** - * @brief Disable the TIM peripheral. - * @param __HANDLE__ TIM handle - * @retval None - */ -#define __HAL_TIM_DISABLE(__HANDLE__) \ - do { \ - if (((__HANDLE__)->Instance->CCER & TIM_CCER_CCxE_MASK) == 0UL) \ - { \ - if(((__HANDLE__)->Instance->CCER & TIM_CCER_CCxNE_MASK) == 0UL) \ - { \ - (__HANDLE__)->Instance->CR1 &= ~(TIM_CR1_CEN); \ - } \ - } \ - } while(0) - -/** - * @brief Disable the TIM main Output. - * @param __HANDLE__ TIM handle - * @retval None - * @note The Main Output Enable of a timer instance is disabled only if all the CCx and CCxN channels have been - * disabled - */ -#define __HAL_TIM_MOE_DISABLE(__HANDLE__) \ - do { \ - if (((__HANDLE__)->Instance->CCER & TIM_CCER_CCxE_MASK) == 0UL) \ - { \ - if(((__HANDLE__)->Instance->CCER & TIM_CCER_CCxNE_MASK) == 0UL) \ - { \ - (__HANDLE__)->Instance->BDTR &= ~(TIM_BDTR_MOE); \ - } \ - } \ - } while(0) - -/** - * @brief Disable the TIM main Output. - * @param __HANDLE__ TIM handle - * @retval None - * @note The Main Output Enable of a timer instance is disabled unconditionally - */ -#define __HAL_TIM_MOE_DISABLE_UNCONDITIONALLY(__HANDLE__) (__HANDLE__)->Instance->BDTR &= ~(TIM_BDTR_MOE) - -/** @brief Enable the specified TIM interrupt. - * @param __HANDLE__ specifies the TIM Handle. - * @param __INTERRUPT__ specifies the TIM interrupt source to enable. - * This parameter can be one of the following values: - * @arg TIM_IT_UPDATE: Update interrupt - * @arg TIM_IT_CC1: Capture/Compare 1 interrupt - * @arg TIM_IT_CC2: Capture/Compare 2 interrupt - * @arg TIM_IT_CC3: Capture/Compare 3 interrupt - * @arg TIM_IT_CC4: Capture/Compare 4 interrupt - * @arg TIM_IT_COM: Commutation interrupt - * @arg TIM_IT_TRIGGER: Trigger interrupt - * @arg TIM_IT_BREAK: Break interrupt - * @retval None - */ -#define __HAL_TIM_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->DIER |= (__INTERRUPT__)) - -/** @brief Disable the specified TIM interrupt. - * @param __HANDLE__ specifies the TIM Handle. - * @param __INTERRUPT__ specifies the TIM interrupt source to disable. - * This parameter can be one of the following values: - * @arg TIM_IT_UPDATE: Update interrupt - * @arg TIM_IT_CC1: Capture/Compare 1 interrupt - * @arg TIM_IT_CC2: Capture/Compare 2 interrupt - * @arg TIM_IT_CC3: Capture/Compare 3 interrupt - * @arg TIM_IT_CC4: Capture/Compare 4 interrupt - * @arg TIM_IT_COM: Commutation interrupt - * @arg TIM_IT_TRIGGER: Trigger interrupt - * @arg TIM_IT_BREAK: Break interrupt - * @retval None - */ -#define __HAL_TIM_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->DIER &= ~(__INTERRUPT__)) - -/** @brief Enable the specified DMA request. - * @param __HANDLE__ specifies the TIM Handle. - * @param __DMA__ specifies the TIM DMA request to enable. - * This parameter can be one of the following values: - * @arg TIM_DMA_UPDATE: Update DMA request - * @arg TIM_DMA_CC1: Capture/Compare 1 DMA request - * @arg TIM_DMA_CC2: Capture/Compare 2 DMA request - * @arg TIM_DMA_CC3: Capture/Compare 3 DMA request - * @arg TIM_DMA_CC4: Capture/Compare 4 DMA request - * @arg TIM_DMA_COM: Commutation DMA request - * @arg TIM_DMA_TRIGGER: Trigger DMA request - * @retval None - */ -#define __HAL_TIM_ENABLE_DMA(__HANDLE__, __DMA__) ((__HANDLE__)->Instance->DIER |= (__DMA__)) - -/** @brief Disable the specified DMA request. - * @param __HANDLE__ specifies the TIM Handle. - * @param __DMA__ specifies the TIM DMA request to disable. - * This parameter can be one of the following values: - * @arg TIM_DMA_UPDATE: Update DMA request - * @arg TIM_DMA_CC1: Capture/Compare 1 DMA request - * @arg TIM_DMA_CC2: Capture/Compare 2 DMA request - * @arg TIM_DMA_CC3: Capture/Compare 3 DMA request - * @arg TIM_DMA_CC4: Capture/Compare 4 DMA request - * @arg TIM_DMA_COM: Commutation DMA request - * @arg TIM_DMA_TRIGGER: Trigger DMA request - * @retval None - */ -#define __HAL_TIM_DISABLE_DMA(__HANDLE__, __DMA__) ((__HANDLE__)->Instance->DIER &= ~(__DMA__)) - -/** @brief Check whether the specified TIM interrupt flag is set or not. - * @param __HANDLE__ specifies the TIM Handle. - * @param __FLAG__ specifies the TIM interrupt flag to check. - * This parameter can be one of the following values: - * @arg TIM_FLAG_UPDATE: Update interrupt flag - * @arg TIM_FLAG_CC1: Capture/Compare 1 interrupt flag - * @arg TIM_FLAG_CC2: Capture/Compare 2 interrupt flag - * @arg TIM_FLAG_CC3: Capture/Compare 3 interrupt flag - * @arg TIM_FLAG_CC4: Capture/Compare 4 interrupt flag - * @arg TIM_FLAG_CC5: Compare 5 interrupt flag - * @arg TIM_FLAG_CC6: Compare 6 interrupt flag - * @arg TIM_FLAG_COM: Commutation interrupt flag - * @arg TIM_FLAG_TRIGGER: Trigger interrupt flag - * @arg TIM_FLAG_BREAK: Break interrupt flag - * @arg TIM_FLAG_BREAK2: Break 2 interrupt flag - * @arg TIM_FLAG_SYSTEM_BREAK: System Break interrupt flag - * @arg TIM_FLAG_CC1OF: Capture/Compare 1 overcapture flag - * @arg TIM_FLAG_CC2OF: Capture/Compare 2 overcapture flag - * @arg TIM_FLAG_CC3OF: Capture/Compare 3 overcapture flag - * @arg TIM_FLAG_CC4OF: Capture/Compare 4 overcapture flag - * @retval The new state of __FLAG__ (TRUE or FALSE). - */ -#define __HAL_TIM_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR &(__FLAG__)) == (__FLAG__)) - -/** @brief Clear the specified TIM interrupt flag. - * @param __HANDLE__ specifies the TIM Handle. - * @param __FLAG__ specifies the TIM interrupt flag to clear. - * This parameter can be one of the following values: - * @arg TIM_FLAG_UPDATE: Update interrupt flag - * @arg TIM_FLAG_CC1: Capture/Compare 1 interrupt flag - * @arg TIM_FLAG_CC2: Capture/Compare 2 interrupt flag - * @arg TIM_FLAG_CC3: Capture/Compare 3 interrupt flag - * @arg TIM_FLAG_CC4: Capture/Compare 4 interrupt flag - * @arg TIM_FLAG_CC5: Compare 5 interrupt flag - * @arg TIM_FLAG_CC6: Compare 6 interrupt flag - * @arg TIM_FLAG_COM: Commutation interrupt flag - * @arg TIM_FLAG_TRIGGER: Trigger interrupt flag - * @arg TIM_FLAG_BREAK: Break interrupt flag - * @arg TIM_FLAG_BREAK2: Break 2 interrupt flag - * @arg TIM_FLAG_SYSTEM_BREAK: System Break interrupt flag - * @arg TIM_FLAG_CC1OF: Capture/Compare 1 overcapture flag - * @arg TIM_FLAG_CC2OF: Capture/Compare 2 overcapture flag - * @arg TIM_FLAG_CC3OF: Capture/Compare 3 overcapture flag - * @arg TIM_FLAG_CC4OF: Capture/Compare 4 overcapture flag - * @retval The new state of __FLAG__ (TRUE or FALSE). - */ -#define __HAL_TIM_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->SR = ~(__FLAG__)) - -/** - * @brief Check whether the specified TIM interrupt source is enabled or not. - * @param __HANDLE__ TIM handle - * @param __INTERRUPT__ specifies the TIM interrupt source to check. - * This parameter can be one of the following values: - * @arg TIM_IT_UPDATE: Update interrupt - * @arg TIM_IT_CC1: Capture/Compare 1 interrupt - * @arg TIM_IT_CC2: Capture/Compare 2 interrupt - * @arg TIM_IT_CC3: Capture/Compare 3 interrupt - * @arg TIM_IT_CC4: Capture/Compare 4 interrupt - * @arg TIM_IT_COM: Commutation interrupt - * @arg TIM_IT_TRIGGER: Trigger interrupt - * @arg TIM_IT_BREAK: Break interrupt - * @retval The state of TIM_IT (SET or RESET). - */ -#define __HAL_TIM_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->DIER & (__INTERRUPT__)) \ - == (__INTERRUPT__)) ? SET : RESET) - -/** @brief Clear the TIM interrupt pending bits. - * @param __HANDLE__ TIM handle - * @param __INTERRUPT__ specifies the interrupt pending bit to clear. - * This parameter can be one of the following values: - * @arg TIM_IT_UPDATE: Update interrupt - * @arg TIM_IT_CC1: Capture/Compare 1 interrupt - * @arg TIM_IT_CC2: Capture/Compare 2 interrupt - * @arg TIM_IT_CC3: Capture/Compare 3 interrupt - * @arg TIM_IT_CC4: Capture/Compare 4 interrupt - * @arg TIM_IT_COM: Commutation interrupt - * @arg TIM_IT_TRIGGER: Trigger interrupt - * @arg TIM_IT_BREAK: Break interrupt - * @retval None - */ -#define __HAL_TIM_CLEAR_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->SR = ~(__INTERRUPT__)) - -/** - * @brief Force a continuous copy of the update interrupt flag (UIF) into the timer counter register (bit 31). - * @note This allows both the counter value and a potential roll-over condition signalled by the UIFCPY flag to be read - * in an atomic way. - * @param __HANDLE__ TIM handle. - * @retval None -mode. - */ -#define __HAL_TIM_UIFREMAP_ENABLE(__HANDLE__) (((__HANDLE__)->Instance->CR1 |= TIM_CR1_UIFREMAP)) - -/** - * @brief Disable update interrupt flag (UIF) remapping. - * @param __HANDLE__ TIM handle. - * @retval None -mode. - */ -#define __HAL_TIM_UIFREMAP_DISABLE(__HANDLE__) (((__HANDLE__)->Instance->CR1 &= ~TIM_CR1_UIFREMAP)) - -/** - * @brief Get update interrupt flag (UIF) copy status. - * @param __COUNTER__ Counter value. - * @retval The state of UIFCPY (TRUE or FALSE). -mode. - */ -#define __HAL_TIM_GET_UIFCPY(__COUNTER__) (((__COUNTER__) & (TIM_CNT_UIFCPY)) == (TIM_CNT_UIFCPY)) - -/** - * @brief Indicates whether or not the TIM Counter is used as downcounter. - * @param __HANDLE__ TIM handle. - * @retval False (Counter used as upcounter) or True (Counter used as downcounter) - * @note This macro is particularly useful to get the counting mode when the timer operates in Center-aligned mode - * or Encoder mode. - */ -#define __HAL_TIM_IS_TIM_COUNTING_DOWN(__HANDLE__) (((__HANDLE__)->Instance->CR1 &(TIM_CR1_DIR)) == (TIM_CR1_DIR)) - -/** - * @brief Set the TIM Prescaler on runtime. - * @param __HANDLE__ TIM handle. - * @param __PRESC__ specifies the Prescaler new value. - * @retval None - */ -#define __HAL_TIM_SET_PRESCALER(__HANDLE__, __PRESC__) ((__HANDLE__)->Instance->PSC = (__PRESC__)) - -/** - * @brief Set the TIM Counter Register value on runtime. - * Note Please check if the bit 31 of CNT register is used as UIF copy or not, this may affect the counter range in - * case of 32 bits counter TIM instance. - * Bit 31 of CNT can be enabled/disabled using __HAL_TIM_UIFREMAP_ENABLE()/__HAL_TIM_UIFREMAP_DISABLE() macros. - * @param __HANDLE__ TIM handle. - * @param __COUNTER__ specifies the Counter register new value. - * @retval None - */ -#define __HAL_TIM_SET_COUNTER(__HANDLE__, __COUNTER__) ((__HANDLE__)->Instance->CNT = (__COUNTER__)) - -/** - * @brief Get the TIM Counter Register value on runtime. - * @param __HANDLE__ TIM handle. - * @retval 16-bit or 32-bit value of the timer counter register (TIMx_CNT) - */ -#define __HAL_TIM_GET_COUNTER(__HANDLE__) ((__HANDLE__)->Instance->CNT) - -/** - * @brief Set the TIM Autoreload Register value on runtime without calling another time any Init function. - * @param __HANDLE__ TIM handle. - * @param __AUTORELOAD__ specifies the Counter register new value. - * @retval None - */ -#define __HAL_TIM_SET_AUTORELOAD(__HANDLE__, __AUTORELOAD__) \ - do{ \ - (__HANDLE__)->Instance->ARR = (__AUTORELOAD__); \ - (__HANDLE__)->Init.Period = (__AUTORELOAD__); \ - } while(0) - -/** - * @brief Get the TIM Autoreload Register value on runtime. - * @param __HANDLE__ TIM handle. - * @retval 16-bit or 32-bit value of the timer auto-reload register(TIMx_ARR) - */ -#define __HAL_TIM_GET_AUTORELOAD(__HANDLE__) ((__HANDLE__)->Instance->ARR) - -/** - * @brief Set the TIM Clock Division value on runtime without calling another time any Init function. - * @param __HANDLE__ TIM handle. - * @param __CKD__ specifies the clock division value. - * This parameter can be one of the following value: - * @arg TIM_CLOCKDIVISION_DIV1: tDTS=tCK_INT - * @arg TIM_CLOCKDIVISION_DIV2: tDTS=2*tCK_INT - * @arg TIM_CLOCKDIVISION_DIV4: tDTS=4*tCK_INT - * @retval None - */ -#define __HAL_TIM_SET_CLOCKDIVISION(__HANDLE__, __CKD__) \ - do{ \ - (__HANDLE__)->Instance->CR1 &= (~TIM_CR1_CKD); \ - (__HANDLE__)->Instance->CR1 |= (__CKD__); \ - (__HANDLE__)->Init.ClockDivision = (__CKD__); \ - } while(0) - -/** - * @brief Get the TIM Clock Division value on runtime. - * @param __HANDLE__ TIM handle. - * @retval The clock division can be one of the following values: - * @arg TIM_CLOCKDIVISION_DIV1: tDTS=tCK_INT - * @arg TIM_CLOCKDIVISION_DIV2: tDTS=2*tCK_INT - * @arg TIM_CLOCKDIVISION_DIV4: tDTS=4*tCK_INT - */ -#define __HAL_TIM_GET_CLOCKDIVISION(__HANDLE__) ((__HANDLE__)->Instance->CR1 & TIM_CR1_CKD) - -/** - * @brief Set the TIM Input Capture prescaler on runtime without calling another time HAL_TIM_IC_ConfigChannel() - * function. - * @param __HANDLE__ TIM handle. - * @param __CHANNEL__ TIM Channels to be configured. - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @arg TIM_CHANNEL_4: TIM Channel 4 selected - * @param __ICPSC__ specifies the Input Capture4 prescaler new value. - * This parameter can be one of the following values: - * @arg TIM_ICPSC_DIV1: no prescaler - * @arg TIM_ICPSC_DIV2: capture is done once every 2 events - * @arg TIM_ICPSC_DIV4: capture is done once every 4 events - * @arg TIM_ICPSC_DIV8: capture is done once every 8 events - * @retval None - */ -#define __HAL_TIM_SET_ICPRESCALER(__HANDLE__, __CHANNEL__, __ICPSC__) \ - do{ \ - TIM_RESET_ICPRESCALERVALUE((__HANDLE__), (__CHANNEL__)); \ - TIM_SET_ICPRESCALERVALUE((__HANDLE__), (__CHANNEL__), (__ICPSC__)); \ - } while(0) - -/** - * @brief Get the TIM Input Capture prescaler on runtime. - * @param __HANDLE__ TIM handle. - * @param __CHANNEL__ TIM Channels to be configured. - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: get input capture 1 prescaler value - * @arg TIM_CHANNEL_2: get input capture 2 prescaler value - * @arg TIM_CHANNEL_3: get input capture 3 prescaler value - * @arg TIM_CHANNEL_4: get input capture 4 prescaler value - * @retval The input capture prescaler can be one of the following values: - * @arg TIM_ICPSC_DIV1: no prescaler - * @arg TIM_ICPSC_DIV2: capture is done once every 2 events - * @arg TIM_ICPSC_DIV4: capture is done once every 4 events - * @arg TIM_ICPSC_DIV8: capture is done once every 8 events - */ -#define __HAL_TIM_GET_ICPRESCALER(__HANDLE__, __CHANNEL__) \ - (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 & TIM_CCMR1_IC1PSC) :\ - ((__CHANNEL__) == TIM_CHANNEL_2) ? (((__HANDLE__)->Instance->CCMR1 & TIM_CCMR1_IC2PSC) >> 8U) :\ - ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 & TIM_CCMR2_IC3PSC) :\ - (((__HANDLE__)->Instance->CCMR2 & TIM_CCMR2_IC4PSC)) >> 8U) - -/** - * @brief Set the TIM Capture Compare Register value on runtime without calling another time ConfigChannel function. - * @param __HANDLE__ TIM handle. - * @param __CHANNEL__ TIM Channels to be configured. - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @arg TIM_CHANNEL_4: TIM Channel 4 selected - * @arg TIM_CHANNEL_5: TIM Channel 5 selected - * @arg TIM_CHANNEL_6: TIM Channel 6 selected - * @param __COMPARE__ specifies the Capture Compare register new value. - * @retval None - */ -#define __HAL_TIM_SET_COMPARE(__HANDLE__, __CHANNEL__, __COMPARE__) \ - (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCR1 = (__COMPARE__)) :\ - ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCR2 = (__COMPARE__)) :\ - ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCR3 = (__COMPARE__)) :\ - ((__CHANNEL__) == TIM_CHANNEL_4) ? ((__HANDLE__)->Instance->CCR4 = (__COMPARE__)) :\ - ((__CHANNEL__) == TIM_CHANNEL_5) ? ((__HANDLE__)->Instance->CCR5 = (__COMPARE__)) :\ - ((__HANDLE__)->Instance->CCR6 = (__COMPARE__))) - -/** - * @brief Get the TIM Capture Compare Register value on runtime. - * @param __HANDLE__ TIM handle. - * @param __CHANNEL__ TIM Channel associated with the capture compare register - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: get capture/compare 1 register value - * @arg TIM_CHANNEL_2: get capture/compare 2 register value - * @arg TIM_CHANNEL_3: get capture/compare 3 register value - * @arg TIM_CHANNEL_4: get capture/compare 4 register value - * @arg TIM_CHANNEL_5: get capture/compare 5 register value - * @arg TIM_CHANNEL_6: get capture/compare 6 register value - * @retval 16-bit or 32-bit value of the capture/compare register (TIMx_CCRy) - */ -#define __HAL_TIM_GET_COMPARE(__HANDLE__, __CHANNEL__) \ - (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCR1) :\ - ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCR2) :\ - ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCR3) :\ - ((__CHANNEL__) == TIM_CHANNEL_4) ? ((__HANDLE__)->Instance->CCR4) :\ - ((__CHANNEL__) == TIM_CHANNEL_5) ? ((__HANDLE__)->Instance->CCR5) :\ - ((__HANDLE__)->Instance->CCR6)) - -/** - * @brief Set the TIM Output compare preload. - * @param __HANDLE__ TIM handle. - * @param __CHANNEL__ TIM Channels to be configured. - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @arg TIM_CHANNEL_4: TIM Channel 4 selected - * @arg TIM_CHANNEL_5: TIM Channel 5 selected - * @arg TIM_CHANNEL_6: TIM Channel 6 selected - * @retval None - */ -#define __HAL_TIM_ENABLE_OCxPRELOAD(__HANDLE__, __CHANNEL__) \ - (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 |= TIM_CCMR1_OC1PE) :\ - ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 |= TIM_CCMR1_OC2PE) :\ - ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 |= TIM_CCMR2_OC3PE) :\ - ((__CHANNEL__) == TIM_CHANNEL_4) ? ((__HANDLE__)->Instance->CCMR2 |= TIM_CCMR2_OC4PE) :\ - ((__CHANNEL__) == TIM_CHANNEL_5) ? ((__HANDLE__)->Instance->CCMR3 |= TIM_CCMR3_OC5PE) :\ - ((__HANDLE__)->Instance->CCMR3 |= TIM_CCMR3_OC6PE)) - -/** - * @brief Reset the TIM Output compare preload. - * @param __HANDLE__ TIM handle. - * @param __CHANNEL__ TIM Channels to be configured. - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @arg TIM_CHANNEL_4: TIM Channel 4 selected - * @arg TIM_CHANNEL_5: TIM Channel 5 selected - * @arg TIM_CHANNEL_6: TIM Channel 6 selected - * @retval None - */ -#define __HAL_TIM_DISABLE_OCxPRELOAD(__HANDLE__, __CHANNEL__) \ - (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 &= ~TIM_CCMR1_OC1PE) :\ - ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 &= ~TIM_CCMR1_OC2PE) :\ - ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 &= ~TIM_CCMR2_OC3PE) :\ - ((__CHANNEL__) == TIM_CHANNEL_4) ? ((__HANDLE__)->Instance->CCMR2 &= ~TIM_CCMR2_OC4PE) :\ - ((__CHANNEL__) == TIM_CHANNEL_5) ? ((__HANDLE__)->Instance->CCMR3 &= ~TIM_CCMR3_OC5PE) :\ - ((__HANDLE__)->Instance->CCMR3 &= ~TIM_CCMR3_OC6PE)) - -/** - * @brief Enable fast mode for a given channel. - * @param __HANDLE__ TIM handle. - * @param __CHANNEL__ TIM Channels to be configured. - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @arg TIM_CHANNEL_4: TIM Channel 4 selected - * @arg TIM_CHANNEL_5: TIM Channel 5 selected - * @arg TIM_CHANNEL_6: TIM Channel 6 selected - * @note When fast mode is enabled an active edge on the trigger input acts - * like a compare match on CCx output. Delay to sample the trigger - * input and to activate CCx output is reduced to 3 clock cycles. - * @note Fast mode acts only if the channel is configured in PWM1 or PWM2 mode. - * @retval None - */ -#define __HAL_TIM_ENABLE_OCxFAST(__HANDLE__, __CHANNEL__) \ - (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 |= TIM_CCMR1_OC1FE) :\ - ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 |= TIM_CCMR1_OC2FE) :\ - ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 |= TIM_CCMR2_OC3FE) :\ - ((__CHANNEL__) == TIM_CHANNEL_4) ? ((__HANDLE__)->Instance->CCMR2 |= TIM_CCMR2_OC4FE) :\ - ((__CHANNEL__) == TIM_CHANNEL_5) ? ((__HANDLE__)->Instance->CCMR3 |= TIM_CCMR3_OC5FE) :\ - ((__HANDLE__)->Instance->CCMR3 |= TIM_CCMR3_OC6FE)) - -/** - * @brief Disable fast mode for a given channel. - * @param __HANDLE__ TIM handle. - * @param __CHANNEL__ TIM Channels to be configured. - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @arg TIM_CHANNEL_4: TIM Channel 4 selected - * @arg TIM_CHANNEL_5: TIM Channel 5 selected - * @arg TIM_CHANNEL_6: TIM Channel 6 selected - * @note When fast mode is disabled CCx output behaves normally depending - * on counter and CCRx values even when the trigger is ON. The minimum - * delay to activate CCx output when an active edge occurs on the - * trigger input is 5 clock cycles. - * @retval None - */ -#define __HAL_TIM_DISABLE_OCxFAST(__HANDLE__, __CHANNEL__) \ - (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 &= ~TIM_CCMR1_OC1FE) :\ - ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 &= ~TIM_CCMR1_OC2FE) :\ - ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 &= ~TIM_CCMR2_OC3FE) :\ - ((__CHANNEL__) == TIM_CHANNEL_4) ? ((__HANDLE__)->Instance->CCMR2 &= ~TIM_CCMR2_OC4FE) :\ - ((__CHANNEL__) == TIM_CHANNEL_5) ? ((__HANDLE__)->Instance->CCMR3 &= ~TIM_CCMR3_OC5FE) :\ - ((__HANDLE__)->Instance->CCMR3 &= ~TIM_CCMR3_OC6FE)) - -/** - * @brief Set the Update Request Source (URS) bit of the TIMx_CR1 register. - * @param __HANDLE__ TIM handle. - * @note When the URS bit of the TIMx_CR1 register is set, only counter - * overflow/underflow generates an update interrupt or DMA request (if - * enabled) - * @retval None - */ -#define __HAL_TIM_URS_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1|= TIM_CR1_URS) - -/** - * @brief Reset the Update Request Source (URS) bit of the TIMx_CR1 register. - * @param __HANDLE__ TIM handle. - * @note When the URS bit of the TIMx_CR1 register is reset, any of the - * following events generate an update interrupt or DMA request (if - * enabled): - * _ Counter overflow underflow - * _ Setting the UG bit - * _ Update generation through the slave mode controller - * @retval None - */ -#define __HAL_TIM_URS_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1&=~TIM_CR1_URS) - -/** - * @brief Set the TIM Capture x input polarity on runtime. - * @param __HANDLE__ TIM handle. - * @param __CHANNEL__ TIM Channels to be configured. - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @arg TIM_CHANNEL_4: TIM Channel 4 selected - * @param __POLARITY__ Polarity for TIx source - * @arg TIM_INPUTCHANNELPOLARITY_RISING: Rising Edge - * @arg TIM_INPUTCHANNELPOLARITY_FALLING: Falling Edge - * @arg TIM_INPUTCHANNELPOLARITY_BOTHEDGE: Rising and Falling Edge - * @retval None - */ -#define __HAL_TIM_SET_CAPTUREPOLARITY(__HANDLE__, __CHANNEL__, __POLARITY__) \ - do{ \ - TIM_RESET_CAPTUREPOLARITY((__HANDLE__), (__CHANNEL__)); \ - TIM_SET_CAPTUREPOLARITY((__HANDLE__), (__CHANNEL__), (__POLARITY__)); \ - }while(0) - -/** @brief Select the Capture/compare DMA request source. - * @param __HANDLE__ specifies the TIM Handle. - * @param __CCDMA__ specifies Capture/compare DMA request source - * This parameter can be one of the following values: - * @arg TIM_CCDMAREQUEST_CC: CCx DMA request generated on Capture/Compare event - * @arg TIM_CCDMAREQUEST_UPDATE: CCx DMA request generated on Update event - * @retval None - */ -#define __HAL_TIM_SELECT_CCDMAREQUEST(__HANDLE__, __CCDMA__) \ - MODIFY_REG((__HANDLE__)->Instance->CR2, TIM_CR2_CCDS, (__CCDMA__)) - -/** - * @} - */ -/* End of exported macros ----------------------------------------------------*/ - -/* Private constants ---------------------------------------------------------*/ -/** @defgroup TIM_Private_Constants TIM Private Constants - * @{ - */ -/* The counter of a timer instance is disabled only if all the CCx and CCxN - channels have been disabled */ -#define TIM_CCER_CCxE_MASK ((uint32_t)(TIM_CCER_CC1E | TIM_CCER_CC2E | TIM_CCER_CC3E | TIM_CCER_CC4E)) -#define TIM_CCER_CCxNE_MASK ((uint32_t)(TIM_CCER_CC1NE | TIM_CCER_CC2NE | TIM_CCER_CC3NE)) -/** - * @} - */ -/* End of private constants --------------------------------------------------*/ - -/* Private macros ------------------------------------------------------------*/ -/** @defgroup TIM_Private_Macros TIM Private Macros - * @{ - */ -#define IS_TIM_CLEARINPUT_SOURCE(__MODE__) (((__MODE__) == TIM_CLEARINPUTSOURCE_ETR) || \ - ((__MODE__) == TIM_CLEARINPUTSOURCE_OCREFCLR) || \ - ((__MODE__) == TIM_CLEARINPUTSOURCE_NONE)) - -#define IS_TIM_DMA_BASE(__BASE__) (((__BASE__) == TIM_DMABASE_CR1) || \ - ((__BASE__) == TIM_DMABASE_CR2) || \ - ((__BASE__) == TIM_DMABASE_SMCR) || \ - ((__BASE__) == TIM_DMABASE_DIER) || \ - ((__BASE__) == TIM_DMABASE_SR) || \ - ((__BASE__) == TIM_DMABASE_EGR) || \ - ((__BASE__) == TIM_DMABASE_CCMR1) || \ - ((__BASE__) == TIM_DMABASE_CCMR2) || \ - ((__BASE__) == TIM_DMABASE_CCER) || \ - ((__BASE__) == TIM_DMABASE_CNT) || \ - ((__BASE__) == TIM_DMABASE_PSC) || \ - ((__BASE__) == TIM_DMABASE_ARR) || \ - ((__BASE__) == TIM_DMABASE_RCR) || \ - ((__BASE__) == TIM_DMABASE_CCR1) || \ - ((__BASE__) == TIM_DMABASE_CCR2) || \ - ((__BASE__) == TIM_DMABASE_CCR3) || \ - ((__BASE__) == TIM_DMABASE_CCR4) || \ - ((__BASE__) == TIM_DMABASE_BDTR) || \ - ((__BASE__) == TIM_DMABASE_OR1) || \ - ((__BASE__) == TIM_DMABASE_CCMR3) || \ - ((__BASE__) == TIM_DMABASE_CCR5) || \ - ((__BASE__) == TIM_DMABASE_CCR6) || \ - ((__BASE__) == TIM_DMABASE_OR2) || \ - ((__BASE__) == TIM_DMABASE_OR3)) - -#define IS_TIM_EVENT_SOURCE(__SOURCE__) ((((__SOURCE__) & 0xFFFFFE00U) == 0x00000000U) && ((__SOURCE__) != 0x00000000U)) - -#define IS_TIM_COUNTER_MODE(__MODE__) (((__MODE__) == TIM_COUNTERMODE_UP) || \ - ((__MODE__) == TIM_COUNTERMODE_DOWN) || \ - ((__MODE__) == TIM_COUNTERMODE_CENTERALIGNED1) || \ - ((__MODE__) == TIM_COUNTERMODE_CENTERALIGNED2) || \ - ((__MODE__) == TIM_COUNTERMODE_CENTERALIGNED3)) - -#define IS_TIM_UIFREMAP_MODE(__MODE__) (((__MODE__) == TIM_UIFREMAP_DISABLE) || \ - ((__MODE__) == TIM_UIFREMAP_ENABLE)) - -#define IS_TIM_CLOCKDIVISION_DIV(__DIV__) (((__DIV__) == TIM_CLOCKDIVISION_DIV1) || \ - ((__DIV__) == TIM_CLOCKDIVISION_DIV2) || \ - ((__DIV__) == TIM_CLOCKDIVISION_DIV4)) - -#define IS_TIM_AUTORELOAD_PRELOAD(PRELOAD) (((PRELOAD) == TIM_AUTORELOAD_PRELOAD_DISABLE) || \ - ((PRELOAD) == TIM_AUTORELOAD_PRELOAD_ENABLE)) - -#define IS_TIM_FAST_STATE(__STATE__) (((__STATE__) == TIM_OCFAST_DISABLE) || \ - ((__STATE__) == TIM_OCFAST_ENABLE)) - -#define IS_TIM_OC_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_OCPOLARITY_HIGH) || \ - ((__POLARITY__) == TIM_OCPOLARITY_LOW)) - -#define IS_TIM_OCN_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_OCNPOLARITY_HIGH) || \ - ((__POLARITY__) == TIM_OCNPOLARITY_LOW)) - -#define IS_TIM_OCIDLE_STATE(__STATE__) (((__STATE__) == TIM_OCIDLESTATE_SET) || \ - ((__STATE__) == TIM_OCIDLESTATE_RESET)) - -#define IS_TIM_OCNIDLE_STATE(__STATE__) (((__STATE__) == TIM_OCNIDLESTATE_SET) || \ - ((__STATE__) == TIM_OCNIDLESTATE_RESET)) - -#define IS_TIM_ENCODERINPUT_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_ENCODERINPUTPOLARITY_RISING) || \ - ((__POLARITY__) == TIM_ENCODERINPUTPOLARITY_FALLING)) - -#define IS_TIM_IC_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_ICPOLARITY_RISING) || \ - ((__POLARITY__) == TIM_ICPOLARITY_FALLING) || \ - ((__POLARITY__) == TIM_ICPOLARITY_BOTHEDGE)) - -#define IS_TIM_IC_SELECTION(__SELECTION__) (((__SELECTION__) == TIM_ICSELECTION_DIRECTTI) || \ - ((__SELECTION__) == TIM_ICSELECTION_INDIRECTTI) || \ - ((__SELECTION__) == TIM_ICSELECTION_TRC)) - -#define IS_TIM_IC_PRESCALER(__PRESCALER__) (((__PRESCALER__) == TIM_ICPSC_DIV1) || \ - ((__PRESCALER__) == TIM_ICPSC_DIV2) || \ - ((__PRESCALER__) == TIM_ICPSC_DIV4) || \ - ((__PRESCALER__) == TIM_ICPSC_DIV8)) - -#define IS_TIM_OPM_MODE(__MODE__) (((__MODE__) == TIM_OPMODE_SINGLE) || \ - ((__MODE__) == TIM_OPMODE_REPETITIVE)) - -#define IS_TIM_ENCODER_MODE(__MODE__) (((__MODE__) == TIM_ENCODERMODE_TI1) || \ - ((__MODE__) == TIM_ENCODERMODE_TI2) || \ - ((__MODE__) == TIM_ENCODERMODE_TI12)) - -#define IS_TIM_DMA_SOURCE(__SOURCE__) ((((__SOURCE__) & 0xFFFF80FFU) == 0x00000000U) && ((__SOURCE__) != 0x00000000U)) - -#define IS_TIM_CHANNELS(__CHANNEL__) (((__CHANNEL__) == TIM_CHANNEL_1) || \ - ((__CHANNEL__) == TIM_CHANNEL_2) || \ - ((__CHANNEL__) == TIM_CHANNEL_3) || \ - ((__CHANNEL__) == TIM_CHANNEL_4) || \ - ((__CHANNEL__) == TIM_CHANNEL_5) || \ - ((__CHANNEL__) == TIM_CHANNEL_6) || \ - ((__CHANNEL__) == TIM_CHANNEL_ALL)) - -#define IS_TIM_OPM_CHANNELS(__CHANNEL__) (((__CHANNEL__) == TIM_CHANNEL_1) || \ - ((__CHANNEL__) == TIM_CHANNEL_2)) - -#define IS_TIM_PERIOD(__HANDLE__, __PERIOD__) \ - ((IS_TIM_32B_COUNTER_INSTANCE(((__HANDLE__)->Instance)) == 0U) ? (((__PERIOD__) > 0U) && ((__PERIOD__) <= 0x0000FFFFU)) : ((__PERIOD__) > 0U)) - -#define IS_TIM_COMPLEMENTARY_CHANNELS(__CHANNEL__) (((__CHANNEL__) == TIM_CHANNEL_1) || \ - ((__CHANNEL__) == TIM_CHANNEL_2) || \ - ((__CHANNEL__) == TIM_CHANNEL_3)) - -#define IS_TIM_CLOCKSOURCE(__CLOCK__) (((__CLOCK__) == TIM_CLOCKSOURCE_INTERNAL) || \ - ((__CLOCK__) == TIM_CLOCKSOURCE_ETRMODE1) || \ - ((__CLOCK__) == TIM_CLOCKSOURCE_ETRMODE2) || \ - ((__CLOCK__) == TIM_CLOCKSOURCE_TI1ED) || \ - ((__CLOCK__) == TIM_CLOCKSOURCE_TI1) || \ - ((__CLOCK__) == TIM_CLOCKSOURCE_TI2) || \ - ((__CLOCK__) == TIM_CLOCKSOURCE_ITR0) || \ - ((__CLOCK__) == TIM_CLOCKSOURCE_ITR1) || \ - ((__CLOCK__) == TIM_CLOCKSOURCE_ITR2) || \ - ((__CLOCK__) == TIM_CLOCKSOURCE_ITR3)) - -#define IS_TIM_CLOCKPOLARITY(__POLARITY__) (((__POLARITY__) == TIM_CLOCKPOLARITY_INVERTED) || \ - ((__POLARITY__) == TIM_CLOCKPOLARITY_NONINVERTED) || \ - ((__POLARITY__) == TIM_CLOCKPOLARITY_RISING) || \ - ((__POLARITY__) == TIM_CLOCKPOLARITY_FALLING) || \ - ((__POLARITY__) == TIM_CLOCKPOLARITY_BOTHEDGE)) - -#define IS_TIM_CLOCKPRESCALER(__PRESCALER__) (((__PRESCALER__) == TIM_CLOCKPRESCALER_DIV1) || \ - ((__PRESCALER__) == TIM_CLOCKPRESCALER_DIV2) || \ - ((__PRESCALER__) == TIM_CLOCKPRESCALER_DIV4) || \ - ((__PRESCALER__) == TIM_CLOCKPRESCALER_DIV8)) - -#define IS_TIM_CLOCKFILTER(__ICFILTER__) ((__ICFILTER__) <= 0xFU) - -#define IS_TIM_CLEARINPUT_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_CLEARINPUTPOLARITY_INVERTED) || \ - ((__POLARITY__) == TIM_CLEARINPUTPOLARITY_NONINVERTED)) - -#define IS_TIM_CLEARINPUT_PRESCALER(__PRESCALER__) (((__PRESCALER__) == TIM_CLEARINPUTPRESCALER_DIV1) || \ - ((__PRESCALER__) == TIM_CLEARINPUTPRESCALER_DIV2) || \ - ((__PRESCALER__) == TIM_CLEARINPUTPRESCALER_DIV4) || \ - ((__PRESCALER__) == TIM_CLEARINPUTPRESCALER_DIV8)) - -#define IS_TIM_CLEARINPUT_FILTER(__ICFILTER__) ((__ICFILTER__) <= 0xFU) - -#define IS_TIM_OSSR_STATE(__STATE__) (((__STATE__) == TIM_OSSR_ENABLE) || \ - ((__STATE__) == TIM_OSSR_DISABLE)) - -#define IS_TIM_OSSI_STATE(__STATE__) (((__STATE__) == TIM_OSSI_ENABLE) || \ - ((__STATE__) == TIM_OSSI_DISABLE)) - -#define IS_TIM_LOCK_LEVEL(__LEVEL__) (((__LEVEL__) == TIM_LOCKLEVEL_OFF) || \ - ((__LEVEL__) == TIM_LOCKLEVEL_1) || \ - ((__LEVEL__) == TIM_LOCKLEVEL_2) || \ - ((__LEVEL__) == TIM_LOCKLEVEL_3)) - -#define IS_TIM_BREAK_FILTER(__BRKFILTER__) ((__BRKFILTER__) <= 0xFUL) - - -#define IS_TIM_BREAK_STATE(__STATE__) (((__STATE__) == TIM_BREAK_ENABLE) || \ - ((__STATE__) == TIM_BREAK_DISABLE)) - -#define IS_TIM_BREAK_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_BREAKPOLARITY_LOW) || \ - ((__POLARITY__) == TIM_BREAKPOLARITY_HIGH)) - -#define IS_TIM_BREAK2_STATE(__STATE__) (((__STATE__) == TIM_BREAK2_ENABLE) || \ - ((__STATE__) == TIM_BREAK2_DISABLE)) - -#define IS_TIM_BREAK2_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_BREAK2POLARITY_LOW) || \ - ((__POLARITY__) == TIM_BREAK2POLARITY_HIGH)) - -#define IS_TIM_AUTOMATIC_OUTPUT_STATE(__STATE__) (((__STATE__) == TIM_AUTOMATICOUTPUT_ENABLE) || \ - ((__STATE__) == TIM_AUTOMATICOUTPUT_DISABLE)) - -#define IS_TIM_GROUPCH5(__OCREF__) ((((__OCREF__) & 0x1FFFFFFFU) == 0x00000000U)) - -#define IS_TIM_TRGO_SOURCE(__SOURCE__) (((__SOURCE__) == TIM_TRGO_RESET) || \ - ((__SOURCE__) == TIM_TRGO_ENABLE) || \ - ((__SOURCE__) == TIM_TRGO_UPDATE) || \ - ((__SOURCE__) == TIM_TRGO_OC1) || \ - ((__SOURCE__) == TIM_TRGO_OC1REF) || \ - ((__SOURCE__) == TIM_TRGO_OC2REF) || \ - ((__SOURCE__) == TIM_TRGO_OC3REF) || \ - ((__SOURCE__) == TIM_TRGO_OC4REF)) - -#define IS_TIM_TRGO2_SOURCE(__SOURCE__) (((__SOURCE__) == TIM_TRGO2_RESET) || \ - ((__SOURCE__) == TIM_TRGO2_ENABLE) || \ - ((__SOURCE__) == TIM_TRGO2_UPDATE) || \ - ((__SOURCE__) == TIM_TRGO2_OC1) || \ - ((__SOURCE__) == TIM_TRGO2_OC1REF) || \ - ((__SOURCE__) == TIM_TRGO2_OC2REF) || \ - ((__SOURCE__) == TIM_TRGO2_OC3REF) || \ - ((__SOURCE__) == TIM_TRGO2_OC3REF) || \ - ((__SOURCE__) == TIM_TRGO2_OC4REF) || \ - ((__SOURCE__) == TIM_TRGO2_OC5REF) || \ - ((__SOURCE__) == TIM_TRGO2_OC6REF) || \ - ((__SOURCE__) == TIM_TRGO2_OC4REF_RISINGFALLING) || \ - ((__SOURCE__) == TIM_TRGO2_OC6REF_RISINGFALLING) || \ - ((__SOURCE__) == TIM_TRGO2_OC4REF_RISING_OC6REF_RISING) || \ - ((__SOURCE__) == TIM_TRGO2_OC4REF_RISING_OC6REF_FALLING) || \ - ((__SOURCE__) == TIM_TRGO2_OC5REF_RISING_OC6REF_RISING) || \ - ((__SOURCE__) == TIM_TRGO2_OC5REF_RISING_OC6REF_FALLING)) - -#define IS_TIM_MSM_STATE(__STATE__) (((__STATE__) == TIM_MASTERSLAVEMODE_ENABLE) || \ - ((__STATE__) == TIM_MASTERSLAVEMODE_DISABLE)) - -#define IS_TIM_SLAVE_MODE(__MODE__) (((__MODE__) == TIM_SLAVEMODE_DISABLE) || \ - ((__MODE__) == TIM_SLAVEMODE_RESET) || \ - ((__MODE__) == TIM_SLAVEMODE_GATED) || \ - ((__MODE__) == TIM_SLAVEMODE_TRIGGER) || \ - ((__MODE__) == TIM_SLAVEMODE_EXTERNAL1) || \ - ((__MODE__) == TIM_SLAVEMODE_COMBINED_RESETTRIGGER)) - -#define IS_TIM_PWM_MODE(__MODE__) (((__MODE__) == TIM_OCMODE_PWM1) || \ - ((__MODE__) == TIM_OCMODE_PWM2) || \ - ((__MODE__) == TIM_OCMODE_COMBINED_PWM1) || \ - ((__MODE__) == TIM_OCMODE_COMBINED_PWM2) || \ - ((__MODE__) == TIM_OCMODE_ASSYMETRIC_PWM1) || \ - ((__MODE__) == TIM_OCMODE_ASSYMETRIC_PWM2)) - -#define IS_TIM_OC_MODE(__MODE__) (((__MODE__) == TIM_OCMODE_TIMING) || \ - ((__MODE__) == TIM_OCMODE_ACTIVE) || \ - ((__MODE__) == TIM_OCMODE_INACTIVE) || \ - ((__MODE__) == TIM_OCMODE_TOGGLE) || \ - ((__MODE__) == TIM_OCMODE_FORCED_ACTIVE) || \ - ((__MODE__) == TIM_OCMODE_FORCED_INACTIVE) || \ - ((__MODE__) == TIM_OCMODE_RETRIGERRABLE_OPM1) || \ - ((__MODE__) == TIM_OCMODE_RETRIGERRABLE_OPM2)) - -#define IS_TIM_TRIGGER_SELECTION(__SELECTION__) (((__SELECTION__) == TIM_TS_ITR0) || \ - ((__SELECTION__) == TIM_TS_ITR1) || \ - ((__SELECTION__) == TIM_TS_ITR2) || \ - ((__SELECTION__) == TIM_TS_ITR3) || \ - ((__SELECTION__) == TIM_TS_TI1F_ED) || \ - ((__SELECTION__) == TIM_TS_TI1FP1) || \ - ((__SELECTION__) == TIM_TS_TI2FP2) || \ - ((__SELECTION__) == TIM_TS_ETRF)) - -#define IS_TIM_INTERNAL_TRIGGEREVENT_SELECTION(__SELECTION__) (((__SELECTION__) == TIM_TS_ITR0) || \ - ((__SELECTION__) == TIM_TS_ITR1) || \ - ((__SELECTION__) == TIM_TS_ITR2) || \ - ((__SELECTION__) == TIM_TS_ITR3) || \ - ((__SELECTION__) == TIM_TS_NONE)) - -#define IS_TIM_TRIGGERPOLARITY(__POLARITY__) (((__POLARITY__) == TIM_TRIGGERPOLARITY_INVERTED ) || \ - ((__POLARITY__) == TIM_TRIGGERPOLARITY_NONINVERTED) || \ - ((__POLARITY__) == TIM_TRIGGERPOLARITY_RISING ) || \ - ((__POLARITY__) == TIM_TRIGGERPOLARITY_FALLING ) || \ - ((__POLARITY__) == TIM_TRIGGERPOLARITY_BOTHEDGE )) - -#define IS_TIM_TRIGGERPRESCALER(__PRESCALER__) (((__PRESCALER__) == TIM_TRIGGERPRESCALER_DIV1) || \ - ((__PRESCALER__) == TIM_TRIGGERPRESCALER_DIV2) || \ - ((__PRESCALER__) == TIM_TRIGGERPRESCALER_DIV4) || \ - ((__PRESCALER__) == TIM_TRIGGERPRESCALER_DIV8)) - -#define IS_TIM_TRIGGERFILTER(__ICFILTER__) ((__ICFILTER__) <= 0xFU) - -#define IS_TIM_TI1SELECTION(__TI1SELECTION__) (((__TI1SELECTION__) == TIM_TI1SELECTION_CH1) || \ - ((__TI1SELECTION__) == TIM_TI1SELECTION_XORCOMBINATION)) - -#define IS_TIM_DMA_LENGTH(__LENGTH__) (((__LENGTH__) == TIM_DMABURSTLENGTH_1TRANSFER) || \ - ((__LENGTH__) == TIM_DMABURSTLENGTH_2TRANSFERS) || \ - ((__LENGTH__) == TIM_DMABURSTLENGTH_3TRANSFERS) || \ - ((__LENGTH__) == TIM_DMABURSTLENGTH_4TRANSFERS) || \ - ((__LENGTH__) == TIM_DMABURSTLENGTH_5TRANSFERS) || \ - ((__LENGTH__) == TIM_DMABURSTLENGTH_6TRANSFERS) || \ - ((__LENGTH__) == TIM_DMABURSTLENGTH_7TRANSFERS) || \ - ((__LENGTH__) == TIM_DMABURSTLENGTH_8TRANSFERS) || \ - ((__LENGTH__) == TIM_DMABURSTLENGTH_9TRANSFERS) || \ - ((__LENGTH__) == TIM_DMABURSTLENGTH_10TRANSFERS) || \ - ((__LENGTH__) == TIM_DMABURSTLENGTH_11TRANSFERS) || \ - ((__LENGTH__) == TIM_DMABURSTLENGTH_12TRANSFERS) || \ - ((__LENGTH__) == TIM_DMABURSTLENGTH_13TRANSFERS) || \ - ((__LENGTH__) == TIM_DMABURSTLENGTH_14TRANSFERS) || \ - ((__LENGTH__) == TIM_DMABURSTLENGTH_15TRANSFERS) || \ - ((__LENGTH__) == TIM_DMABURSTLENGTH_16TRANSFERS) || \ - ((__LENGTH__) == TIM_DMABURSTLENGTH_17TRANSFERS) || \ - ((__LENGTH__) == TIM_DMABURSTLENGTH_18TRANSFERS)) - -#define IS_TIM_DMA_DATA_LENGTH(LENGTH) (((LENGTH) >= 0x1U) && ((LENGTH) < 0x10000U)) - -#define IS_TIM_IC_FILTER(__ICFILTER__) ((__ICFILTER__) <= 0xFU) - -#define IS_TIM_DEADTIME(__DEADTIME__) ((__DEADTIME__) <= 0xFFU) - -#define IS_TIM_BREAK_SYSTEM(__CONFIG__) (((__CONFIG__) == TIM_BREAK_SYSTEM_ECC) || \ - ((__CONFIG__) == TIM_BREAK_SYSTEM_PVD) || \ - ((__CONFIG__) == TIM_BREAK_SYSTEM_SRAM2_PARITY_ERROR) || \ - ((__CONFIG__) == TIM_BREAK_SYSTEM_LOCKUP)) - -#define IS_TIM_SLAVEMODE_TRIGGER_ENABLED(__TRIGGER__) (((__TRIGGER__) == TIM_SLAVEMODE_TRIGGER) || \ - ((__TRIGGER__) == TIM_SLAVEMODE_COMBINED_RESETTRIGGER)) - -#define TIM_SET_ICPRESCALERVALUE(__HANDLE__, __CHANNEL__, __ICPSC__) \ - (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 |= (__ICPSC__)) :\ - ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 |= ((__ICPSC__) << 8U)) :\ - ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 |= (__ICPSC__)) :\ - ((__HANDLE__)->Instance->CCMR2 |= ((__ICPSC__) << 8U))) - -#define TIM_RESET_ICPRESCALERVALUE(__HANDLE__, __CHANNEL__) \ - (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 &= ~TIM_CCMR1_IC1PSC) :\ - ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 &= ~TIM_CCMR1_IC2PSC) :\ - ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 &= ~TIM_CCMR2_IC3PSC) :\ - ((__HANDLE__)->Instance->CCMR2 &= ~TIM_CCMR2_IC4PSC)) - -#define TIM_SET_CAPTUREPOLARITY(__HANDLE__, __CHANNEL__, __POLARITY__) \ - (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCER |= (__POLARITY__)) :\ - ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCER |= ((__POLARITY__) << 4U)) :\ - ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCER |= ((__POLARITY__) << 8U)) :\ - ((__HANDLE__)->Instance->CCER |= (((__POLARITY__) << 12U)))) - -#define TIM_RESET_CAPTUREPOLARITY(__HANDLE__, __CHANNEL__) \ - (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCER &= ~(TIM_CCER_CC1P | TIM_CCER_CC1NP)) :\ - ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCER &= ~(TIM_CCER_CC2P | TIM_CCER_CC2NP)) :\ - ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCER &= ~(TIM_CCER_CC3P | TIM_CCER_CC3NP)) :\ - ((__HANDLE__)->Instance->CCER &= ~(TIM_CCER_CC4P | TIM_CCER_CC4NP))) - -#define TIM_CHANNEL_STATE_GET(__HANDLE__, __CHANNEL__)\ - (((__CHANNEL__) == TIM_CHANNEL_1) ? (__HANDLE__)->ChannelState[0] :\ - ((__CHANNEL__) == TIM_CHANNEL_2) ? (__HANDLE__)->ChannelState[1] :\ - ((__CHANNEL__) == TIM_CHANNEL_3) ? (__HANDLE__)->ChannelState[2] :\ - ((__CHANNEL__) == TIM_CHANNEL_4) ? (__HANDLE__)->ChannelState[3] :\ - ((__CHANNEL__) == TIM_CHANNEL_5) ? (__HANDLE__)->ChannelState[4] :\ - (__HANDLE__)->ChannelState[5]) - -#define TIM_CHANNEL_STATE_SET(__HANDLE__, __CHANNEL__, __CHANNEL_STATE__) \ - (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->ChannelState[0] = (__CHANNEL_STATE__)) :\ - ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->ChannelState[1] = (__CHANNEL_STATE__)) :\ - ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->ChannelState[2] = (__CHANNEL_STATE__)) :\ - ((__CHANNEL__) == TIM_CHANNEL_4) ? ((__HANDLE__)->ChannelState[3] = (__CHANNEL_STATE__)) :\ - ((__CHANNEL__) == TIM_CHANNEL_5) ? ((__HANDLE__)->ChannelState[4] = (__CHANNEL_STATE__)) :\ - ((__HANDLE__)->ChannelState[5] = (__CHANNEL_STATE__))) - -#define TIM_CHANNEL_STATE_SET_ALL(__HANDLE__, __CHANNEL_STATE__) do { \ - (__HANDLE__)->ChannelState[0] = \ - (__CHANNEL_STATE__); \ - (__HANDLE__)->ChannelState[1] = \ - (__CHANNEL_STATE__); \ - (__HANDLE__)->ChannelState[2] = \ - (__CHANNEL_STATE__); \ - (__HANDLE__)->ChannelState[3] = \ - (__CHANNEL_STATE__); \ - (__HANDLE__)->ChannelState[4] = \ - (__CHANNEL_STATE__); \ - (__HANDLE__)->ChannelState[5] = \ - (__CHANNEL_STATE__); \ - } while(0) - -#define TIM_CHANNEL_N_STATE_GET(__HANDLE__, __CHANNEL__)\ - (((__CHANNEL__) == TIM_CHANNEL_1) ? (__HANDLE__)->ChannelNState[0] :\ - ((__CHANNEL__) == TIM_CHANNEL_2) ? (__HANDLE__)->ChannelNState[1] :\ - ((__CHANNEL__) == TIM_CHANNEL_3) ? (__HANDLE__)->ChannelNState[2] :\ - (__HANDLE__)->ChannelNState[3]) - -#define TIM_CHANNEL_N_STATE_SET(__HANDLE__, __CHANNEL__, __CHANNEL_STATE__) \ - (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->ChannelNState[0] = (__CHANNEL_STATE__)) :\ - ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->ChannelNState[1] = (__CHANNEL_STATE__)) :\ - ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->ChannelNState[2] = (__CHANNEL_STATE__)) :\ - ((__HANDLE__)->ChannelNState[3] = (__CHANNEL_STATE__))) - -#define TIM_CHANNEL_N_STATE_SET_ALL(__HANDLE__, __CHANNEL_STATE__) do { \ - (__HANDLE__)->ChannelNState[0] = \ - (__CHANNEL_STATE__); \ - (__HANDLE__)->ChannelNState[1] = \ - (__CHANNEL_STATE__); \ - (__HANDLE__)->ChannelNState[2] = \ - (__CHANNEL_STATE__); \ - (__HANDLE__)->ChannelNState[3] = \ - (__CHANNEL_STATE__); \ - } while(0) - -/** - * @} - */ -/* End of private macros -----------------------------------------------------*/ - -/* Include TIM HAL Extended module */ -#include "stm32l4xx_hal_tim_ex.h" - -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup TIM_Exported_Functions TIM Exported Functions - * @{ - */ - -/** @addtogroup TIM_Exported_Functions_Group1 TIM Time Base functions - * @brief Time Base functions - * @{ - */ -/* Time Base functions ********************************************************/ -HAL_StatusTypeDef HAL_TIM_Base_Init(TIM_HandleTypeDef *htim); -HAL_StatusTypeDef HAL_TIM_Base_DeInit(TIM_HandleTypeDef *htim); -void HAL_TIM_Base_MspInit(TIM_HandleTypeDef *htim); -void HAL_TIM_Base_MspDeInit(TIM_HandleTypeDef *htim); -/* Blocking mode: Polling */ -HAL_StatusTypeDef HAL_TIM_Base_Start(TIM_HandleTypeDef *htim); -HAL_StatusTypeDef HAL_TIM_Base_Stop(TIM_HandleTypeDef *htim); -/* Non-Blocking mode: Interrupt */ -HAL_StatusTypeDef HAL_TIM_Base_Start_IT(TIM_HandleTypeDef *htim); -HAL_StatusTypeDef HAL_TIM_Base_Stop_IT(TIM_HandleTypeDef *htim); -/* Non-Blocking mode: DMA */ -HAL_StatusTypeDef HAL_TIM_Base_Start_DMA(TIM_HandleTypeDef *htim, const uint32_t *pData, uint16_t Length); -HAL_StatusTypeDef HAL_TIM_Base_Stop_DMA(TIM_HandleTypeDef *htim); -/** - * @} - */ - -/** @addtogroup TIM_Exported_Functions_Group2 TIM Output Compare functions - * @brief TIM Output Compare functions - * @{ - */ -/* Timer Output Compare functions *********************************************/ -HAL_StatusTypeDef HAL_TIM_OC_Init(TIM_HandleTypeDef *htim); -HAL_StatusTypeDef HAL_TIM_OC_DeInit(TIM_HandleTypeDef *htim); -void HAL_TIM_OC_MspInit(TIM_HandleTypeDef *htim); -void HAL_TIM_OC_MspDeInit(TIM_HandleTypeDef *htim); -/* Blocking mode: Polling */ -HAL_StatusTypeDef HAL_TIM_OC_Start(TIM_HandleTypeDef *htim, uint32_t Channel); -HAL_StatusTypeDef HAL_TIM_OC_Stop(TIM_HandleTypeDef *htim, uint32_t Channel); -/* Non-Blocking mode: Interrupt */ -HAL_StatusTypeDef HAL_TIM_OC_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel); -HAL_StatusTypeDef HAL_TIM_OC_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel); -/* Non-Blocking mode: DMA */ -HAL_StatusTypeDef HAL_TIM_OC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, const uint32_t *pData, - uint16_t Length); -HAL_StatusTypeDef HAL_TIM_OC_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel); -/** - * @} - */ - -/** @addtogroup TIM_Exported_Functions_Group3 TIM PWM functions - * @brief TIM PWM functions - * @{ - */ -/* Timer PWM functions ********************************************************/ -HAL_StatusTypeDef HAL_TIM_PWM_Init(TIM_HandleTypeDef *htim); -HAL_StatusTypeDef HAL_TIM_PWM_DeInit(TIM_HandleTypeDef *htim); -void HAL_TIM_PWM_MspInit(TIM_HandleTypeDef *htim); -void HAL_TIM_PWM_MspDeInit(TIM_HandleTypeDef *htim); -/* Blocking mode: Polling */ -HAL_StatusTypeDef HAL_TIM_PWM_Start(TIM_HandleTypeDef *htim, uint32_t Channel); -HAL_StatusTypeDef HAL_TIM_PWM_Stop(TIM_HandleTypeDef *htim, uint32_t Channel); -/* Non-Blocking mode: Interrupt */ -HAL_StatusTypeDef HAL_TIM_PWM_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel); -HAL_StatusTypeDef HAL_TIM_PWM_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel); -/* Non-Blocking mode: DMA */ -HAL_StatusTypeDef HAL_TIM_PWM_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, const uint32_t *pData, - uint16_t Length); -HAL_StatusTypeDef HAL_TIM_PWM_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel); -/** - * @} - */ - -/** @addtogroup TIM_Exported_Functions_Group4 TIM Input Capture functions - * @brief TIM Input Capture functions - * @{ - */ -/* Timer Input Capture functions **********************************************/ -HAL_StatusTypeDef HAL_TIM_IC_Init(TIM_HandleTypeDef *htim); -HAL_StatusTypeDef HAL_TIM_IC_DeInit(TIM_HandleTypeDef *htim); -void HAL_TIM_IC_MspInit(TIM_HandleTypeDef *htim); -void HAL_TIM_IC_MspDeInit(TIM_HandleTypeDef *htim); -/* Blocking mode: Polling */ -HAL_StatusTypeDef HAL_TIM_IC_Start(TIM_HandleTypeDef *htim, uint32_t Channel); -HAL_StatusTypeDef HAL_TIM_IC_Stop(TIM_HandleTypeDef *htim, uint32_t Channel); -/* Non-Blocking mode: Interrupt */ -HAL_StatusTypeDef HAL_TIM_IC_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel); -HAL_StatusTypeDef HAL_TIM_IC_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel); -/* Non-Blocking mode: DMA */ -HAL_StatusTypeDef HAL_TIM_IC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length); -HAL_StatusTypeDef HAL_TIM_IC_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel); -/** - * @} - */ - -/** @addtogroup TIM_Exported_Functions_Group5 TIM One Pulse functions - * @brief TIM One Pulse functions - * @{ - */ -/* Timer One Pulse functions **************************************************/ -HAL_StatusTypeDef HAL_TIM_OnePulse_Init(TIM_HandleTypeDef *htim, uint32_t OnePulseMode); -HAL_StatusTypeDef HAL_TIM_OnePulse_DeInit(TIM_HandleTypeDef *htim); -void HAL_TIM_OnePulse_MspInit(TIM_HandleTypeDef *htim); -void HAL_TIM_OnePulse_MspDeInit(TIM_HandleTypeDef *htim); -/* Blocking mode: Polling */ -HAL_StatusTypeDef HAL_TIM_OnePulse_Start(TIM_HandleTypeDef *htim, uint32_t OutputChannel); -HAL_StatusTypeDef HAL_TIM_OnePulse_Stop(TIM_HandleTypeDef *htim, uint32_t OutputChannel); -/* Non-Blocking mode: Interrupt */ -HAL_StatusTypeDef HAL_TIM_OnePulse_Start_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel); -HAL_StatusTypeDef HAL_TIM_OnePulse_Stop_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel); -/** - * @} - */ - -/** @addtogroup TIM_Exported_Functions_Group6 TIM Encoder functions - * @brief TIM Encoder functions - * @{ - */ -/* Timer Encoder functions ****************************************************/ -HAL_StatusTypeDef HAL_TIM_Encoder_Init(TIM_HandleTypeDef *htim, TIM_Encoder_InitTypeDef *sConfig); -HAL_StatusTypeDef HAL_TIM_Encoder_DeInit(TIM_HandleTypeDef *htim); -void HAL_TIM_Encoder_MspInit(TIM_HandleTypeDef *htim); -void HAL_TIM_Encoder_MspDeInit(TIM_HandleTypeDef *htim); -/* Blocking mode: Polling */ -HAL_StatusTypeDef HAL_TIM_Encoder_Start(TIM_HandleTypeDef *htim, uint32_t Channel); -HAL_StatusTypeDef HAL_TIM_Encoder_Stop(TIM_HandleTypeDef *htim, uint32_t Channel); -/* Non-Blocking mode: Interrupt */ -HAL_StatusTypeDef HAL_TIM_Encoder_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel); -HAL_StatusTypeDef HAL_TIM_Encoder_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel); -/* Non-Blocking mode: DMA */ -HAL_StatusTypeDef HAL_TIM_Encoder_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData1, - uint32_t *pData2, uint16_t Length); -HAL_StatusTypeDef HAL_TIM_Encoder_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel); -/** - * @} - */ - -/** @addtogroup TIM_Exported_Functions_Group7 TIM IRQ handler management - * @brief IRQ handler management - * @{ - */ -/* Interrupt Handler functions ***********************************************/ -void HAL_TIM_IRQHandler(TIM_HandleTypeDef *htim); -/** - * @} - */ - -/** @defgroup TIM_Exported_Functions_Group8 TIM Peripheral Control functions - * @brief Peripheral Control functions - * @{ - */ -/* Control functions *********************************************************/ -HAL_StatusTypeDef HAL_TIM_OC_ConfigChannel(TIM_HandleTypeDef *htim, const TIM_OC_InitTypeDef *sConfig, - uint32_t Channel); -HAL_StatusTypeDef HAL_TIM_PWM_ConfigChannel(TIM_HandleTypeDef *htim, const TIM_OC_InitTypeDef *sConfig, - uint32_t Channel); -HAL_StatusTypeDef HAL_TIM_IC_ConfigChannel(TIM_HandleTypeDef *htim, const TIM_IC_InitTypeDef *sConfig, - uint32_t Channel); -HAL_StatusTypeDef HAL_TIM_OnePulse_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OnePulse_InitTypeDef *sConfig, - uint32_t OutputChannel, uint32_t InputChannel); -HAL_StatusTypeDef HAL_TIM_ConfigOCrefClear(TIM_HandleTypeDef *htim, - const TIM_ClearInputConfigTypeDef *sClearInputConfig, - uint32_t Channel); -HAL_StatusTypeDef HAL_TIM_ConfigClockSource(TIM_HandleTypeDef *htim, const TIM_ClockConfigTypeDef *sClockSourceConfig); -HAL_StatusTypeDef HAL_TIM_ConfigTI1Input(TIM_HandleTypeDef *htim, uint32_t TI1_Selection); -HAL_StatusTypeDef HAL_TIM_SlaveConfigSynchro(TIM_HandleTypeDef *htim, const TIM_SlaveConfigTypeDef *sSlaveConfig); -HAL_StatusTypeDef HAL_TIM_SlaveConfigSynchro_IT(TIM_HandleTypeDef *htim, const TIM_SlaveConfigTypeDef *sSlaveConfig); -HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, - uint32_t BurstRequestSrc, const uint32_t *BurstBuffer, uint32_t BurstLength); -HAL_StatusTypeDef HAL_TIM_DMABurst_MultiWriteStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, - uint32_t BurstRequestSrc, const uint32_t *BurstBuffer, - uint32_t BurstLength, uint32_t DataLength); -HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStop(TIM_HandleTypeDef *htim, uint32_t BurstRequestSrc); -HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, - uint32_t BurstRequestSrc, uint32_t *BurstBuffer, uint32_t BurstLength); -HAL_StatusTypeDef HAL_TIM_DMABurst_MultiReadStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, - uint32_t BurstRequestSrc, uint32_t *BurstBuffer, - uint32_t BurstLength, uint32_t DataLength); -HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStop(TIM_HandleTypeDef *htim, uint32_t BurstRequestSrc); -HAL_StatusTypeDef HAL_TIM_GenerateEvent(TIM_HandleTypeDef *htim, uint32_t EventSource); -uint32_t HAL_TIM_ReadCapturedValue(const TIM_HandleTypeDef *htim, uint32_t Channel); -/** - * @} - */ - -/** @defgroup TIM_Exported_Functions_Group9 TIM Callbacks functions - * @brief TIM Callbacks functions - * @{ - */ -/* Callback in non blocking modes (Interrupt and DMA) *************************/ -void HAL_TIM_PeriodElapsedCallback(TIM_HandleTypeDef *htim); -void HAL_TIM_PeriodElapsedHalfCpltCallback(TIM_HandleTypeDef *htim); -void HAL_TIM_OC_DelayElapsedCallback(TIM_HandleTypeDef *htim); -void HAL_TIM_IC_CaptureCallback(TIM_HandleTypeDef *htim); -void HAL_TIM_IC_CaptureHalfCpltCallback(TIM_HandleTypeDef *htim); -void HAL_TIM_PWM_PulseFinishedCallback(TIM_HandleTypeDef *htim); -void HAL_TIM_PWM_PulseFinishedHalfCpltCallback(TIM_HandleTypeDef *htim); -void HAL_TIM_TriggerCallback(TIM_HandleTypeDef *htim); -void HAL_TIM_TriggerHalfCpltCallback(TIM_HandleTypeDef *htim); -void HAL_TIM_ErrorCallback(TIM_HandleTypeDef *htim); - -/* Callbacks Register/UnRegister functions ***********************************/ -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) -HAL_StatusTypeDef HAL_TIM_RegisterCallback(TIM_HandleTypeDef *htim, HAL_TIM_CallbackIDTypeDef CallbackID, - pTIM_CallbackTypeDef pCallback); -HAL_StatusTypeDef HAL_TIM_UnRegisterCallback(TIM_HandleTypeDef *htim, HAL_TIM_CallbackIDTypeDef CallbackID); -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ - -/** - * @} - */ - -/** @defgroup TIM_Exported_Functions_Group10 TIM Peripheral State functions - * @brief Peripheral State functions - * @{ - */ -/* Peripheral State functions ************************************************/ -HAL_TIM_StateTypeDef HAL_TIM_Base_GetState(const TIM_HandleTypeDef *htim); -HAL_TIM_StateTypeDef HAL_TIM_OC_GetState(const TIM_HandleTypeDef *htim); -HAL_TIM_StateTypeDef HAL_TIM_PWM_GetState(const TIM_HandleTypeDef *htim); -HAL_TIM_StateTypeDef HAL_TIM_IC_GetState(const TIM_HandleTypeDef *htim); -HAL_TIM_StateTypeDef HAL_TIM_OnePulse_GetState(const TIM_HandleTypeDef *htim); -HAL_TIM_StateTypeDef HAL_TIM_Encoder_GetState(const TIM_HandleTypeDef *htim); - -/* Peripheral Channel state functions ************************************************/ -HAL_TIM_ActiveChannel HAL_TIM_GetActiveChannel(const TIM_HandleTypeDef *htim); -HAL_TIM_ChannelStateTypeDef HAL_TIM_GetChannelState(const TIM_HandleTypeDef *htim, uint32_t Channel); -HAL_TIM_DMABurstStateTypeDef HAL_TIM_DMABurstState(const TIM_HandleTypeDef *htim); -/** - * @} - */ - -/** - * @} - */ -/* End of exported functions -------------------------------------------------*/ - -/* Private functions----------------------------------------------------------*/ -/** @defgroup TIM_Private_Functions TIM Private Functions - * @{ - */ -void TIM_Base_SetConfig(TIM_TypeDef *TIMx, const TIM_Base_InitTypeDef *Structure); -void TIM_TI1_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, uint32_t TIM_ICFilter); -void TIM_OC2_SetConfig(TIM_TypeDef *TIMx, const TIM_OC_InitTypeDef *OC_Config); -void TIM_ETR_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ExtTRGPrescaler, - uint32_t TIM_ExtTRGPolarity, uint32_t ExtTRGFilter); - -void TIM_DMADelayPulseHalfCplt(DMA_HandleTypeDef *hdma); -void TIM_DMAError(DMA_HandleTypeDef *hdma); -void TIM_DMACaptureCplt(DMA_HandleTypeDef *hdma); -void TIM_DMACaptureHalfCplt(DMA_HandleTypeDef *hdma); -void TIM_CCxChannelCmd(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t ChannelState); - -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) -void TIM_ResetCallback(TIM_HandleTypeDef *htim); -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ - -/** - * @} - */ -/* End of private functions --------------------------------------------------*/ - -/** - * @} - */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /* STM32L4xx_HAL_TIM_H */ +/** + ****************************************************************************** + * @file stm32l4xx_hal_tim.h + * @author MCD Application Team + * @brief Header file of TIM HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32L4xx_HAL_TIM_H +#define STM32L4xx_HAL_TIM_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l4xx_hal_def.h" + +/** @addtogroup STM32L4xx_HAL_Driver + * @{ + */ + +/** @addtogroup TIM + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup TIM_Exported_Types TIM Exported Types + * @{ + */ + +/** + * @brief TIM Time base Configuration Structure definition + */ +typedef struct +{ + uint32_t Prescaler; /*!< Specifies the prescaler value used to divide the TIM clock. + This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */ + + uint32_t CounterMode; /*!< Specifies the counter mode. + This parameter can be a value of @ref TIM_Counter_Mode */ + + uint32_t Period; /*!< Specifies the period value to be loaded into the active + Auto-Reload Register at the next update event. + This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF. */ + + uint32_t ClockDivision; /*!< Specifies the clock division. + This parameter can be a value of @ref TIM_ClockDivision */ + + uint32_t RepetitionCounter; /*!< Specifies the repetition counter value. Each time the RCR downcounter + reaches zero, an update event is generated and counting restarts + from the RCR value (N). + This means in PWM mode that (N+1) corresponds to: + - the number of PWM periods in edge-aligned mode + - the number of half PWM period in center-aligned mode + GP timers: this parameter must be a number between Min_Data = 0x00 and + Max_Data = 0xFF. + Advanced timers: this parameter must be a number between Min_Data = 0x0000 and + Max_Data = 0xFFFF. */ + + uint32_t AutoReloadPreload; /*!< Specifies the auto-reload preload. + This parameter can be a value of @ref TIM_AutoReloadPreload */ +} TIM_Base_InitTypeDef; + +/** + * @brief TIM Output Compare Configuration Structure definition + */ +typedef struct +{ + uint32_t OCMode; /*!< Specifies the TIM mode. + This parameter can be a value of @ref TIM_Output_Compare_and_PWM_modes */ + + uint32_t Pulse; /*!< Specifies the pulse value to be loaded into the Capture Compare Register. + This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */ + + uint32_t OCPolarity; /*!< Specifies the output polarity. + This parameter can be a value of @ref TIM_Output_Compare_Polarity */ + + uint32_t OCNPolarity; /*!< Specifies the complementary output polarity. + This parameter can be a value of @ref TIM_Output_Compare_N_Polarity + @note This parameter is valid only for timer instances supporting break feature. */ + + uint32_t OCFastMode; /*!< Specifies the Fast mode state. + This parameter can be a value of @ref TIM_Output_Fast_State + @note This parameter is valid only in PWM1 and PWM2 mode. */ + + + uint32_t OCIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state. + This parameter can be a value of @ref TIM_Output_Compare_Idle_State + @note This parameter is valid only for timer instances supporting break feature. */ + + uint32_t OCNIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state. + This parameter can be a value of @ref TIM_Output_Compare_N_Idle_State + @note This parameter is valid only for timer instances supporting break feature. */ +} TIM_OC_InitTypeDef; + +/** + * @brief TIM One Pulse Mode Configuration Structure definition + */ +typedef struct +{ + uint32_t OCMode; /*!< Specifies the TIM mode. + This parameter can be a value of @ref TIM_Output_Compare_and_PWM_modes */ + + uint32_t Pulse; /*!< Specifies the pulse value to be loaded into the Capture Compare Register. + This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */ + + uint32_t OCPolarity; /*!< Specifies the output polarity. + This parameter can be a value of @ref TIM_Output_Compare_Polarity */ + + uint32_t OCNPolarity; /*!< Specifies the complementary output polarity. + This parameter can be a value of @ref TIM_Output_Compare_N_Polarity + @note This parameter is valid only for timer instances supporting break feature. */ + + uint32_t OCIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state. + This parameter can be a value of @ref TIM_Output_Compare_Idle_State + @note This parameter is valid only for timer instances supporting break feature. */ + + uint32_t OCNIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state. + This parameter can be a value of @ref TIM_Output_Compare_N_Idle_State + @note This parameter is valid only for timer instances supporting break feature. */ + + uint32_t ICPolarity; /*!< Specifies the active edge of the input signal. + This parameter can be a value of @ref TIM_Input_Capture_Polarity */ + + uint32_t ICSelection; /*!< Specifies the input. + This parameter can be a value of @ref TIM_Input_Capture_Selection */ + + uint32_t ICFilter; /*!< Specifies the input capture filter. + This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ +} TIM_OnePulse_InitTypeDef; + +/** + * @brief TIM Input Capture Configuration Structure definition + */ +typedef struct +{ + uint32_t ICPolarity; /*!< Specifies the active edge of the input signal. + This parameter can be a value of @ref TIM_Input_Capture_Polarity */ + + uint32_t ICSelection; /*!< Specifies the input. + This parameter can be a value of @ref TIM_Input_Capture_Selection */ + + uint32_t ICPrescaler; /*!< Specifies the Input Capture Prescaler. + This parameter can be a value of @ref TIM_Input_Capture_Prescaler */ + + uint32_t ICFilter; /*!< Specifies the input capture filter. + This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ +} TIM_IC_InitTypeDef; + +/** + * @brief TIM Encoder Configuration Structure definition + */ +typedef struct +{ + uint32_t EncoderMode; /*!< Specifies the active edge of the input signal. + This parameter can be a value of @ref TIM_Encoder_Mode */ + + uint32_t IC1Polarity; /*!< Specifies the active edge of the input signal. + This parameter can be a value of @ref TIM_Encoder_Input_Polarity */ + + uint32_t IC1Selection; /*!< Specifies the input. + This parameter can be a value of @ref TIM_Input_Capture_Selection */ + + uint32_t IC1Prescaler; /*!< Specifies the Input Capture Prescaler. + This parameter can be a value of @ref TIM_Input_Capture_Prescaler */ + + uint32_t IC1Filter; /*!< Specifies the input capture filter. + This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ + + uint32_t IC2Polarity; /*!< Specifies the active edge of the input signal. + This parameter can be a value of @ref TIM_Encoder_Input_Polarity */ + + uint32_t IC2Selection; /*!< Specifies the input. + This parameter can be a value of @ref TIM_Input_Capture_Selection */ + + uint32_t IC2Prescaler; /*!< Specifies the Input Capture Prescaler. + This parameter can be a value of @ref TIM_Input_Capture_Prescaler */ + + uint32_t IC2Filter; /*!< Specifies the input capture filter. + This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ +} TIM_Encoder_InitTypeDef; + +/** + * @brief Clock Configuration Handle Structure definition + */ +typedef struct +{ + uint32_t ClockSource; /*!< TIM clock sources + This parameter can be a value of @ref TIM_Clock_Source */ + uint32_t ClockPolarity; /*!< TIM clock polarity + This parameter can be a value of @ref TIM_Clock_Polarity */ + uint32_t ClockPrescaler; /*!< TIM clock prescaler + This parameter can be a value of @ref TIM_Clock_Prescaler */ + uint32_t ClockFilter; /*!< TIM clock filter + This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ +} TIM_ClockConfigTypeDef; + +/** + * @brief TIM Clear Input Configuration Handle Structure definition + */ +typedef struct +{ + uint32_t ClearInputState; /*!< TIM clear Input state + This parameter can be ENABLE or DISABLE */ + uint32_t ClearInputSource; /*!< TIM clear Input sources + This parameter can be a value of @ref TIM_ClearInput_Source */ + uint32_t ClearInputPolarity; /*!< TIM Clear Input polarity + This parameter can be a value of @ref TIM_ClearInput_Polarity */ + uint32_t ClearInputPrescaler; /*!< TIM Clear Input prescaler + This parameter must be 0: When OCRef clear feature is used with ETR source, + ETR prescaler must be off */ + uint32_t ClearInputFilter; /*!< TIM Clear Input filter + This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ +} TIM_ClearInputConfigTypeDef; + +/** + * @brief TIM Master configuration Structure definition + * @note Advanced timers provide TRGO2 internal line which is redirected + * to the ADC + */ +typedef struct +{ + uint32_t MasterOutputTrigger; /*!< Trigger output (TRGO) selection + This parameter can be a value of @ref TIM_Master_Mode_Selection */ + uint32_t MasterOutputTrigger2; /*!< Trigger output2 (TRGO2) selection + This parameter can be a value of @ref TIM_Master_Mode_Selection_2 */ + uint32_t MasterSlaveMode; /*!< Master/slave mode selection + This parameter can be a value of @ref TIM_Master_Slave_Mode + @note When the Master/slave mode is enabled, the effect of + an event on the trigger input (TRGI) is delayed to allow a + perfect synchronization between the current timer and its + slaves (through TRGO). It is not mandatory in case of timer + synchronization mode. */ +} TIM_MasterConfigTypeDef; + +/** + * @brief TIM Slave configuration Structure definition + */ +typedef struct +{ + uint32_t SlaveMode; /*!< Slave mode selection + This parameter can be a value of @ref TIM_Slave_Mode */ + uint32_t InputTrigger; /*!< Input Trigger source + This parameter can be a value of @ref TIM_Trigger_Selection */ + uint32_t TriggerPolarity; /*!< Input Trigger polarity + This parameter can be a value of @ref TIM_Trigger_Polarity */ + uint32_t TriggerPrescaler; /*!< Input trigger prescaler + This parameter can be a value of @ref TIM_Trigger_Prescaler */ + uint32_t TriggerFilter; /*!< Input trigger filter + This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ + +} TIM_SlaveConfigTypeDef; + +/** + * @brief TIM Break input(s) and Dead time configuration Structure definition + * @note 2 break inputs can be configured (BKIN and BKIN2) with configurable + * filter and polarity. + */ +typedef struct +{ + uint32_t OffStateRunMode; /*!< TIM off state in run mode, This parameter can be a value of @ref TIM_OSSR_Off_State_Selection_for_Run_mode_state */ + + uint32_t OffStateIDLEMode; /*!< TIM off state in IDLE mode, This parameter can be a value of @ref TIM_OSSI_Off_State_Selection_for_Idle_mode_state */ + + uint32_t LockLevel; /*!< TIM Lock level, This parameter can be a value of @ref TIM_Lock_level */ + + uint32_t DeadTime; /*!< TIM dead Time, This parameter can be a number between Min_Data = 0x00 and Max_Data = 0xFF */ + + uint32_t BreakState; /*!< TIM Break State, This parameter can be a value of @ref TIM_Break_Input_enable_disable */ + + uint32_t BreakPolarity; /*!< TIM Break input polarity, This parameter can be a value of @ref TIM_Break_Polarity */ + + uint32_t BreakFilter; /*!< Specifies the break input filter.This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ + + uint32_t Break2State; /*!< TIM Break2 State, This parameter can be a value of @ref TIM_Break2_Input_enable_disable */ + + uint32_t Break2Polarity; /*!< TIM Break2 input polarity, This parameter can be a value of @ref TIM_Break2_Polarity */ + + uint32_t Break2Filter; /*!< TIM break2 input filter.This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ + + uint32_t AutomaticOutput; /*!< TIM Automatic Output Enable state, This parameter can be a value of @ref TIM_AOE_Bit_Set_Reset */ + +} TIM_BreakDeadTimeConfigTypeDef; + +/** + * @brief HAL State structures definition + */ +typedef enum +{ + HAL_TIM_STATE_RESET = 0x00U, /*!< Peripheral not yet initialized or disabled */ + HAL_TIM_STATE_READY = 0x01U, /*!< Peripheral Initialized and ready for use */ + HAL_TIM_STATE_BUSY = 0x02U, /*!< An internal process is ongoing */ + HAL_TIM_STATE_TIMEOUT = 0x03U, /*!< Timeout state */ + HAL_TIM_STATE_ERROR = 0x04U /*!< Reception process is ongoing */ +} HAL_TIM_StateTypeDef; + +/** + * @brief TIM Channel States definition + */ +typedef enum +{ + HAL_TIM_CHANNEL_STATE_RESET = 0x00U, /*!< TIM Channel initial state */ + HAL_TIM_CHANNEL_STATE_READY = 0x01U, /*!< TIM Channel ready for use */ + HAL_TIM_CHANNEL_STATE_BUSY = 0x02U, /*!< An internal process is ongoing on the TIM channel */ +} HAL_TIM_ChannelStateTypeDef; + +/** + * @brief DMA Burst States definition + */ +typedef enum +{ + HAL_DMA_BURST_STATE_RESET = 0x00U, /*!< DMA Burst initial state */ + HAL_DMA_BURST_STATE_READY = 0x01U, /*!< DMA Burst ready for use */ + HAL_DMA_BURST_STATE_BUSY = 0x02U, /*!< Ongoing DMA Burst */ +} HAL_TIM_DMABurstStateTypeDef; + +/** + * @brief HAL Active channel structures definition + */ +typedef enum +{ + HAL_TIM_ACTIVE_CHANNEL_1 = 0x01U, /*!< The active channel is 1 */ + HAL_TIM_ACTIVE_CHANNEL_2 = 0x02U, /*!< The active channel is 2 */ + HAL_TIM_ACTIVE_CHANNEL_3 = 0x04U, /*!< The active channel is 3 */ + HAL_TIM_ACTIVE_CHANNEL_4 = 0x08U, /*!< The active channel is 4 */ + HAL_TIM_ACTIVE_CHANNEL_5 = 0x10U, /*!< The active channel is 5 */ + HAL_TIM_ACTIVE_CHANNEL_6 = 0x20U, /*!< The active channel is 6 */ + HAL_TIM_ACTIVE_CHANNEL_CLEARED = 0x00U /*!< All active channels cleared */ +} HAL_TIM_ActiveChannel; + +/** + * @brief TIM Time Base Handle Structure definition + */ +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) +typedef struct __TIM_HandleTypeDef +#else +typedef struct +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ +{ + TIM_TypeDef *Instance; /*!< Register base address */ + TIM_Base_InitTypeDef Init; /*!< TIM Time Base required parameters */ + HAL_TIM_ActiveChannel Channel; /*!< Active channel */ + DMA_HandleTypeDef *hdma[7]; /*!< DMA Handlers array + This array is accessed by a @ref DMA_Handle_index */ + HAL_LockTypeDef Lock; /*!< Locking object */ + __IO HAL_TIM_StateTypeDef State; /*!< TIM operation state */ + __IO HAL_TIM_ChannelStateTypeDef ChannelState[6]; /*!< TIM channel operation state */ + __IO HAL_TIM_ChannelStateTypeDef ChannelNState[4]; /*!< TIM complementary channel operation state */ + __IO HAL_TIM_DMABurstStateTypeDef DMABurstState; /*!< DMA burst operation state */ + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + void (* Base_MspInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Base Msp Init Callback */ + void (* Base_MspDeInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Base Msp DeInit Callback */ + void (* IC_MspInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM IC Msp Init Callback */ + void (* IC_MspDeInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM IC Msp DeInit Callback */ + void (* OC_MspInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM OC Msp Init Callback */ + void (* OC_MspDeInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM OC Msp DeInit Callback */ + void (* PWM_MspInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM PWM Msp Init Callback */ + void (* PWM_MspDeInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM PWM Msp DeInit Callback */ + void (* OnePulse_MspInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM One Pulse Msp Init Callback */ + void (* OnePulse_MspDeInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM One Pulse Msp DeInit Callback */ + void (* Encoder_MspInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Encoder Msp Init Callback */ + void (* Encoder_MspDeInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Encoder Msp DeInit Callback */ + void (* HallSensor_MspInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Hall Sensor Msp Init Callback */ + void (* HallSensor_MspDeInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Hall Sensor Msp DeInit Callback */ + void (* PeriodElapsedCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Period Elapsed Callback */ + void (* PeriodElapsedHalfCpltCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Period Elapsed half complete Callback */ + void (* TriggerCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Trigger Callback */ + void (* TriggerHalfCpltCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Trigger half complete Callback */ + void (* IC_CaptureCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Input Capture Callback */ + void (* IC_CaptureHalfCpltCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Input Capture half complete Callback */ + void (* OC_DelayElapsedCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Output Compare Delay Elapsed Callback */ + void (* PWM_PulseFinishedCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM PWM Pulse Finished Callback */ + void (* PWM_PulseFinishedHalfCpltCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM PWM Pulse Finished half complete Callback */ + void (* ErrorCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Error Callback */ + void (* CommutationCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Commutation Callback */ + void (* CommutationHalfCpltCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Commutation half complete Callback */ + void (* BreakCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Break Callback */ + void (* Break2Callback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Break2 Callback */ +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ +} TIM_HandleTypeDef; + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) +/** + * @brief HAL TIM Callback ID enumeration definition + */ +typedef enum +{ + HAL_TIM_BASE_MSPINIT_CB_ID = 0x00U /*!< TIM Base MspInit Callback ID */ + , HAL_TIM_BASE_MSPDEINIT_CB_ID = 0x01U /*!< TIM Base MspDeInit Callback ID */ + , HAL_TIM_IC_MSPINIT_CB_ID = 0x02U /*!< TIM IC MspInit Callback ID */ + , HAL_TIM_IC_MSPDEINIT_CB_ID = 0x03U /*!< TIM IC MspDeInit Callback ID */ + , HAL_TIM_OC_MSPINIT_CB_ID = 0x04U /*!< TIM OC MspInit Callback ID */ + , HAL_TIM_OC_MSPDEINIT_CB_ID = 0x05U /*!< TIM OC MspDeInit Callback ID */ + , HAL_TIM_PWM_MSPINIT_CB_ID = 0x06U /*!< TIM PWM MspInit Callback ID */ + , HAL_TIM_PWM_MSPDEINIT_CB_ID = 0x07U /*!< TIM PWM MspDeInit Callback ID */ + , HAL_TIM_ONE_PULSE_MSPINIT_CB_ID = 0x08U /*!< TIM One Pulse MspInit Callback ID */ + , HAL_TIM_ONE_PULSE_MSPDEINIT_CB_ID = 0x09U /*!< TIM One Pulse MspDeInit Callback ID */ + , HAL_TIM_ENCODER_MSPINIT_CB_ID = 0x0AU /*!< TIM Encoder MspInit Callback ID */ + , HAL_TIM_ENCODER_MSPDEINIT_CB_ID = 0x0BU /*!< TIM Encoder MspDeInit Callback ID */ + , HAL_TIM_HALL_SENSOR_MSPINIT_CB_ID = 0x0CU /*!< TIM Hall Sensor MspDeInit Callback ID */ + , HAL_TIM_HALL_SENSOR_MSPDEINIT_CB_ID = 0x0DU /*!< TIM Hall Sensor MspDeInit Callback ID */ + , HAL_TIM_PERIOD_ELAPSED_CB_ID = 0x0EU /*!< TIM Period Elapsed Callback ID */ + , HAL_TIM_PERIOD_ELAPSED_HALF_CB_ID = 0x0FU /*!< TIM Period Elapsed half complete Callback ID */ + , HAL_TIM_TRIGGER_CB_ID = 0x10U /*!< TIM Trigger Callback ID */ + , HAL_TIM_TRIGGER_HALF_CB_ID = 0x11U /*!< TIM Trigger half complete Callback ID */ + , HAL_TIM_IC_CAPTURE_CB_ID = 0x12U /*!< TIM Input Capture Callback ID */ + , HAL_TIM_IC_CAPTURE_HALF_CB_ID = 0x13U /*!< TIM Input Capture half complete Callback ID */ + , HAL_TIM_OC_DELAY_ELAPSED_CB_ID = 0x14U /*!< TIM Output Compare Delay Elapsed Callback ID */ + , HAL_TIM_PWM_PULSE_FINISHED_CB_ID = 0x15U /*!< TIM PWM Pulse Finished Callback ID */ + , HAL_TIM_PWM_PULSE_FINISHED_HALF_CB_ID = 0x16U /*!< TIM PWM Pulse Finished half complete Callback ID */ + , HAL_TIM_ERROR_CB_ID = 0x17U /*!< TIM Error Callback ID */ + , HAL_TIM_COMMUTATION_CB_ID = 0x18U /*!< TIM Commutation Callback ID */ + , HAL_TIM_COMMUTATION_HALF_CB_ID = 0x19U /*!< TIM Commutation half complete Callback ID */ + , HAL_TIM_BREAK_CB_ID = 0x1AU /*!< TIM Break Callback ID */ + , HAL_TIM_BREAK2_CB_ID = 0x1BU /*!< TIM Break2 Callback ID */ +} HAL_TIM_CallbackIDTypeDef; + +/** + * @brief HAL TIM Callback pointer definition + */ +typedef void (*pTIM_CallbackTypeDef)(TIM_HandleTypeDef *htim); /*!< pointer to the TIM callback function */ + +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + +/** + * @} + */ +/* End of exported types -----------------------------------------------------*/ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup TIM_Exported_Constants TIM Exported Constants + * @{ + */ + +/** @defgroup TIM_ClearInput_Source TIM Clear Input Source + * @{ + */ +#define TIM_CLEARINPUTSOURCE_NONE 0x00000000U /*!< OCREF_CLR is disabled */ +#define TIM_CLEARINPUTSOURCE_ETR 0x00000001U /*!< OCREF_CLR is connected to ETRF input */ +#define TIM_CLEARINPUTSOURCE_OCREFCLR 0x00000002U /*!< OCREF_CLR is connected to OCREF_CLR_INT */ +/** + * @} + */ + +/** @defgroup TIM_DMA_Base_address TIM DMA Base Address + * @{ + */ +#define TIM_DMABASE_CR1 0x00000000U +#define TIM_DMABASE_CR2 0x00000001U +#define TIM_DMABASE_SMCR 0x00000002U +#define TIM_DMABASE_DIER 0x00000003U +#define TIM_DMABASE_SR 0x00000004U +#define TIM_DMABASE_EGR 0x00000005U +#define TIM_DMABASE_CCMR1 0x00000006U +#define TIM_DMABASE_CCMR2 0x00000007U +#define TIM_DMABASE_CCER 0x00000008U +#define TIM_DMABASE_CNT 0x00000009U +#define TIM_DMABASE_PSC 0x0000000AU +#define TIM_DMABASE_ARR 0x0000000BU +#define TIM_DMABASE_RCR 0x0000000CU +#define TIM_DMABASE_CCR1 0x0000000DU +#define TIM_DMABASE_CCR2 0x0000000EU +#define TIM_DMABASE_CCR3 0x0000000FU +#define TIM_DMABASE_CCR4 0x00000010U +#define TIM_DMABASE_BDTR 0x00000011U +#define TIM_DMABASE_DCR 0x00000012U +#define TIM_DMABASE_DMAR 0x00000013U +#define TIM_DMABASE_OR1 0x00000014U +#define TIM_DMABASE_CCMR3 0x00000015U +#define TIM_DMABASE_CCR5 0x00000016U +#define TIM_DMABASE_CCR6 0x00000017U +#define TIM_DMABASE_OR2 0x00000018U +#define TIM_DMABASE_OR3 0x00000019U +/** + * @} + */ + +/** @defgroup TIM_Event_Source TIM Event Source + * @{ + */ +#define TIM_EVENTSOURCE_UPDATE TIM_EGR_UG /*!< Reinitialize the counter and generates an update of the registers */ +#define TIM_EVENTSOURCE_CC1 TIM_EGR_CC1G /*!< A capture/compare event is generated on channel 1 */ +#define TIM_EVENTSOURCE_CC2 TIM_EGR_CC2G /*!< A capture/compare event is generated on channel 2 */ +#define TIM_EVENTSOURCE_CC3 TIM_EGR_CC3G /*!< A capture/compare event is generated on channel 3 */ +#define TIM_EVENTSOURCE_CC4 TIM_EGR_CC4G /*!< A capture/compare event is generated on channel 4 */ +#define TIM_EVENTSOURCE_COM TIM_EGR_COMG /*!< A commutation event is generated */ +#define TIM_EVENTSOURCE_TRIGGER TIM_EGR_TG /*!< A trigger event is generated */ +#define TIM_EVENTSOURCE_BREAK TIM_EGR_BG /*!< A break event is generated */ +#define TIM_EVENTSOURCE_BREAK2 TIM_EGR_B2G /*!< A break 2 event is generated */ +/** + * @} + */ + +/** @defgroup TIM_Input_Channel_Polarity TIM Input Channel polarity + * @{ + */ +#define TIM_INPUTCHANNELPOLARITY_RISING 0x00000000U /*!< Polarity for TIx source */ +#define TIM_INPUTCHANNELPOLARITY_FALLING TIM_CCER_CC1P /*!< Polarity for TIx source */ +#define TIM_INPUTCHANNELPOLARITY_BOTHEDGE (TIM_CCER_CC1P | TIM_CCER_CC1NP) /*!< Polarity for TIx source */ +/** + * @} + */ + +/** @defgroup TIM_ETR_Polarity TIM ETR Polarity + * @{ + */ +#define TIM_ETRPOLARITY_INVERTED TIM_SMCR_ETP /*!< Polarity for ETR source */ +#define TIM_ETRPOLARITY_NONINVERTED 0x00000000U /*!< Polarity for ETR source */ +/** + * @} + */ + +/** @defgroup TIM_ETR_Prescaler TIM ETR Prescaler + * @{ + */ +#define TIM_ETRPRESCALER_DIV1 0x00000000U /*!< No prescaler is used */ +#define TIM_ETRPRESCALER_DIV2 TIM_SMCR_ETPS_0 /*!< ETR input source is divided by 2 */ +#define TIM_ETRPRESCALER_DIV4 TIM_SMCR_ETPS_1 /*!< ETR input source is divided by 4 */ +#define TIM_ETRPRESCALER_DIV8 TIM_SMCR_ETPS /*!< ETR input source is divided by 8 */ +/** + * @} + */ + +/** @defgroup TIM_Counter_Mode TIM Counter Mode + * @{ + */ +#define TIM_COUNTERMODE_UP 0x00000000U /*!< Counter used as up-counter */ +#define TIM_COUNTERMODE_DOWN TIM_CR1_DIR /*!< Counter used as down-counter */ +#define TIM_COUNTERMODE_CENTERALIGNED1 TIM_CR1_CMS_0 /*!< Center-aligned mode 1 */ +#define TIM_COUNTERMODE_CENTERALIGNED2 TIM_CR1_CMS_1 /*!< Center-aligned mode 2 */ +#define TIM_COUNTERMODE_CENTERALIGNED3 TIM_CR1_CMS /*!< Center-aligned mode 3 */ +/** + * @} + */ + +/** @defgroup TIM_Update_Interrupt_Flag_Remap TIM Update Interrupt Flag Remap + * @{ + */ +#define TIM_UIFREMAP_DISABLE 0x00000000U /*!< Update interrupt flag remap disabled */ +#define TIM_UIFREMAP_ENABLE TIM_CR1_UIFREMAP /*!< Update interrupt flag remap enabled */ +/** + * @} + */ + +/** @defgroup TIM_ClockDivision TIM Clock Division + * @{ + */ +#define TIM_CLOCKDIVISION_DIV1 0x00000000U /*!< Clock division: tDTS=tCK_INT */ +#define TIM_CLOCKDIVISION_DIV2 TIM_CR1_CKD_0 /*!< Clock division: tDTS=2*tCK_INT */ +#define TIM_CLOCKDIVISION_DIV4 TIM_CR1_CKD_1 /*!< Clock division: tDTS=4*tCK_INT */ +/** + * @} + */ + +/** @defgroup TIM_Output_Compare_State TIM Output Compare State + * @{ + */ +#define TIM_OUTPUTSTATE_DISABLE 0x00000000U /*!< Capture/Compare 1 output disabled */ +#define TIM_OUTPUTSTATE_ENABLE TIM_CCER_CC1E /*!< Capture/Compare 1 output enabled */ +/** + * @} + */ + +/** @defgroup TIM_AutoReloadPreload TIM Auto-Reload Preload + * @{ + */ +#define TIM_AUTORELOAD_PRELOAD_DISABLE 0x00000000U /*!< TIMx_ARR register is not buffered */ +#define TIM_AUTORELOAD_PRELOAD_ENABLE TIM_CR1_ARPE /*!< TIMx_ARR register is buffered */ + +/** + * @} + */ + +/** @defgroup TIM_Output_Fast_State TIM Output Fast State + * @{ + */ +#define TIM_OCFAST_DISABLE 0x00000000U /*!< Output Compare fast disable */ +#define TIM_OCFAST_ENABLE TIM_CCMR1_OC1FE /*!< Output Compare fast enable */ +/** + * @} + */ + +/** @defgroup TIM_Output_Compare_N_State TIM Complementary Output Compare State + * @{ + */ +#define TIM_OUTPUTNSTATE_DISABLE 0x00000000U /*!< OCxN is disabled */ +#define TIM_OUTPUTNSTATE_ENABLE TIM_CCER_CC1NE /*!< OCxN is enabled */ +/** + * @} + */ + +/** @defgroup TIM_Output_Compare_Polarity TIM Output Compare Polarity + * @{ + */ +#define TIM_OCPOLARITY_HIGH 0x00000000U /*!< Capture/Compare output polarity */ +#define TIM_OCPOLARITY_LOW TIM_CCER_CC1P /*!< Capture/Compare output polarity */ +/** + * @} + */ + +/** @defgroup TIM_Output_Compare_N_Polarity TIM Complementary Output Compare Polarity + * @{ + */ +#define TIM_OCNPOLARITY_HIGH 0x00000000U /*!< Capture/Compare complementary output polarity */ +#define TIM_OCNPOLARITY_LOW TIM_CCER_CC1NP /*!< Capture/Compare complementary output polarity */ +/** + * @} + */ + +/** @defgroup TIM_Output_Compare_Idle_State TIM Output Compare Idle State + * @{ + */ +#define TIM_OCIDLESTATE_SET TIM_CR2_OIS1 /*!< Output Idle state: OCx=1 when MOE=0 */ +#define TIM_OCIDLESTATE_RESET 0x00000000U /*!< Output Idle state: OCx=0 when MOE=0 */ +/** + * @} + */ + +/** @defgroup TIM_Output_Compare_N_Idle_State TIM Complementary Output Compare Idle State + * @{ + */ +#define TIM_OCNIDLESTATE_SET TIM_CR2_OIS1N /*!< Complementary output Idle state: OCxN=1 when MOE=0 */ +#define TIM_OCNIDLESTATE_RESET 0x00000000U /*!< Complementary output Idle state: OCxN=0 when MOE=0 */ +/** + * @} + */ + +/** @defgroup TIM_Input_Capture_Polarity TIM Input Capture Polarity + * @{ + */ +#define TIM_ICPOLARITY_RISING TIM_INPUTCHANNELPOLARITY_RISING /*!< Capture triggered by rising edge on timer input */ +#define TIM_ICPOLARITY_FALLING TIM_INPUTCHANNELPOLARITY_FALLING /*!< Capture triggered by falling edge on timer input */ +#define TIM_ICPOLARITY_BOTHEDGE TIM_INPUTCHANNELPOLARITY_BOTHEDGE /*!< Capture triggered by both rising and falling edges on timer input*/ +/** + * @} + */ + +/** @defgroup TIM_Encoder_Input_Polarity TIM Encoder Input Polarity + * @{ + */ +#define TIM_ENCODERINPUTPOLARITY_RISING TIM_INPUTCHANNELPOLARITY_RISING /*!< Encoder input with rising edge polarity */ +#define TIM_ENCODERINPUTPOLARITY_FALLING TIM_INPUTCHANNELPOLARITY_FALLING /*!< Encoder input with falling edge polarity */ +/** + * @} + */ + +/** @defgroup TIM_Input_Capture_Selection TIM Input Capture Selection + * @{ + */ +#define TIM_ICSELECTION_DIRECTTI TIM_CCMR1_CC1S_0 /*!< TIM Input 1, 2, 3 or 4 is selected to be connected to IC1, IC2, IC3 or IC4, respectively */ +#define TIM_ICSELECTION_INDIRECTTI TIM_CCMR1_CC1S_1 /*!< TIM Input 1, 2, 3 or 4 is selected to be connected to IC2, IC1, IC4 or IC3, respectively */ +#define TIM_ICSELECTION_TRC TIM_CCMR1_CC1S /*!< TIM Input 1, 2, 3 or 4 is selected to be connected to TRC */ +/** + * @} + */ + +/** @defgroup TIM_Input_Capture_Prescaler TIM Input Capture Prescaler + * @{ + */ +#define TIM_ICPSC_DIV1 0x00000000U /*!< Capture performed each time an edge is detected on the capture input */ +#define TIM_ICPSC_DIV2 TIM_CCMR1_IC1PSC_0 /*!< Capture performed once every 2 events */ +#define TIM_ICPSC_DIV4 TIM_CCMR1_IC1PSC_1 /*!< Capture performed once every 4 events */ +#define TIM_ICPSC_DIV8 TIM_CCMR1_IC1PSC /*!< Capture performed once every 8 events */ +/** + * @} + */ + +/** @defgroup TIM_One_Pulse_Mode TIM One Pulse Mode + * @{ + */ +#define TIM_OPMODE_SINGLE TIM_CR1_OPM /*!< Counter stops counting at the next update event */ +#define TIM_OPMODE_REPETITIVE 0x00000000U /*!< Counter is not stopped at update event */ +/** + * @} + */ + +/** @defgroup TIM_Encoder_Mode TIM Encoder Mode + * @{ + */ +#define TIM_ENCODERMODE_TI1 TIM_SMCR_SMS_0 /*!< Quadrature encoder mode 1, x2 mode, counts up/down on TI1FP1 edge depending on TI2FP2 level */ +#define TIM_ENCODERMODE_TI2 TIM_SMCR_SMS_1 /*!< Quadrature encoder mode 2, x2 mode, counts up/down on TI2FP2 edge depending on TI1FP1 level. */ +#define TIM_ENCODERMODE_TI12 (TIM_SMCR_SMS_1 | TIM_SMCR_SMS_0) /*!< Quadrature encoder mode 3, x4 mode, counts up/down on both TI1FP1 and TI2FP2 edges depending on the level of the other input. */ +/** + * @} + */ + +/** @defgroup TIM_Interrupt_definition TIM interrupt Definition + * @{ + */ +#define TIM_IT_UPDATE TIM_DIER_UIE /*!< Update interrupt */ +#define TIM_IT_CC1 TIM_DIER_CC1IE /*!< Capture/Compare 1 interrupt */ +#define TIM_IT_CC2 TIM_DIER_CC2IE /*!< Capture/Compare 2 interrupt */ +#define TIM_IT_CC3 TIM_DIER_CC3IE /*!< Capture/Compare 3 interrupt */ +#define TIM_IT_CC4 TIM_DIER_CC4IE /*!< Capture/Compare 4 interrupt */ +#define TIM_IT_COM TIM_DIER_COMIE /*!< Commutation interrupt */ +#define TIM_IT_TRIGGER TIM_DIER_TIE /*!< Trigger interrupt */ +#define TIM_IT_BREAK TIM_DIER_BIE /*!< Break interrupt */ +/** + * @} + */ + +/** @defgroup TIM_Commutation_Source TIM Commutation Source + * @{ + */ +#define TIM_COMMUTATION_TRGI TIM_CR2_CCUS /*!< When Capture/compare control bits are preloaded, they are updated by setting the COMG bit or when an rising edge occurs on trigger input */ +#define TIM_COMMUTATION_SOFTWARE 0x00000000U /*!< When Capture/compare control bits are preloaded, they are updated by setting the COMG bit */ +/** + * @} + */ + +/** @defgroup TIM_DMA_sources TIM DMA Sources + * @{ + */ +#define TIM_DMA_UPDATE TIM_DIER_UDE /*!< DMA request is triggered by the update event */ +#define TIM_DMA_CC1 TIM_DIER_CC1DE /*!< DMA request is triggered by the capture/compare macth 1 event */ +#define TIM_DMA_CC2 TIM_DIER_CC2DE /*!< DMA request is triggered by the capture/compare macth 2 event event */ +#define TIM_DMA_CC3 TIM_DIER_CC3DE /*!< DMA request is triggered by the capture/compare macth 3 event event */ +#define TIM_DMA_CC4 TIM_DIER_CC4DE /*!< DMA request is triggered by the capture/compare macth 4 event event */ +#define TIM_DMA_COM TIM_DIER_COMDE /*!< DMA request is triggered by the commutation event */ +#define TIM_DMA_TRIGGER TIM_DIER_TDE /*!< DMA request is triggered by the trigger event */ +/** + * @} + */ + +/** @defgroup TIM_CC_DMA_Request CCx DMA request selection + * @{ + */ +#define TIM_CCDMAREQUEST_CC 0x00000000U /*!< CCx DMA request sent when capture or compare match event occurs */ +#define TIM_CCDMAREQUEST_UPDATE TIM_CR2_CCDS /*!< CCx DMA requests sent when update event occurs */ +/** + * @} + */ + +/** @defgroup TIM_Flag_definition TIM Flag Definition + * @{ + */ +#define TIM_FLAG_UPDATE TIM_SR_UIF /*!< Update interrupt flag */ +#define TIM_FLAG_CC1 TIM_SR_CC1IF /*!< Capture/Compare 1 interrupt flag */ +#define TIM_FLAG_CC2 TIM_SR_CC2IF /*!< Capture/Compare 2 interrupt flag */ +#define TIM_FLAG_CC3 TIM_SR_CC3IF /*!< Capture/Compare 3 interrupt flag */ +#define TIM_FLAG_CC4 TIM_SR_CC4IF /*!< Capture/Compare 4 interrupt flag */ +#define TIM_FLAG_CC5 TIM_SR_CC5IF /*!< Capture/Compare 5 interrupt flag */ +#define TIM_FLAG_CC6 TIM_SR_CC6IF /*!< Capture/Compare 6 interrupt flag */ +#define TIM_FLAG_COM TIM_SR_COMIF /*!< Commutation interrupt flag */ +#define TIM_FLAG_TRIGGER TIM_SR_TIF /*!< Trigger interrupt flag */ +#define TIM_FLAG_BREAK TIM_SR_BIF /*!< Break interrupt flag */ +#define TIM_FLAG_BREAK2 TIM_SR_B2IF /*!< Break 2 interrupt flag */ +#define TIM_FLAG_SYSTEM_BREAK TIM_SR_SBIF /*!< System Break interrupt flag */ +#define TIM_FLAG_CC1OF TIM_SR_CC1OF /*!< Capture 1 overcapture flag */ +#define TIM_FLAG_CC2OF TIM_SR_CC2OF /*!< Capture 2 overcapture flag */ +#define TIM_FLAG_CC3OF TIM_SR_CC3OF /*!< Capture 3 overcapture flag */ +#define TIM_FLAG_CC4OF TIM_SR_CC4OF /*!< Capture 4 overcapture flag */ +/** + * @} + */ + +/** @defgroup TIM_Channel TIM Channel + * @{ + */ +#define TIM_CHANNEL_1 0x00000000U /*!< Capture/compare channel 1 identifier */ +#define TIM_CHANNEL_2 0x00000004U /*!< Capture/compare channel 2 identifier */ +#define TIM_CHANNEL_3 0x00000008U /*!< Capture/compare channel 3 identifier */ +#define TIM_CHANNEL_4 0x0000000CU /*!< Capture/compare channel 4 identifier */ +#define TIM_CHANNEL_5 0x00000010U /*!< Compare channel 5 identifier */ +#define TIM_CHANNEL_6 0x00000014U /*!< Compare channel 6 identifier */ +#define TIM_CHANNEL_ALL 0x0000003CU /*!< Global Capture/compare channel identifier */ +/** + * @} + */ + +/** @defgroup TIM_Clock_Source TIM Clock Source + * @{ + */ +#define TIM_CLOCKSOURCE_INTERNAL TIM_SMCR_ETPS_0 /*!< Internal clock source */ +#define TIM_CLOCKSOURCE_ETRMODE1 TIM_TS_ETRF /*!< External clock source mode 1 (ETRF) */ +#define TIM_CLOCKSOURCE_ETRMODE2 TIM_SMCR_ETPS_1 /*!< External clock source mode 2 */ +#define TIM_CLOCKSOURCE_TI1ED TIM_TS_TI1F_ED /*!< External clock source mode 1 (TTI1FP1 + edge detect.) */ +#define TIM_CLOCKSOURCE_TI1 TIM_TS_TI1FP1 /*!< External clock source mode 1 (TTI1FP1) */ +#define TIM_CLOCKSOURCE_TI2 TIM_TS_TI2FP2 /*!< External clock source mode 1 (TTI2FP2) */ +#define TIM_CLOCKSOURCE_ITR0 TIM_TS_ITR0 /*!< External clock source mode 1 (ITR0) */ +#define TIM_CLOCKSOURCE_ITR1 TIM_TS_ITR1 /*!< External clock source mode 1 (ITR1) */ +#define TIM_CLOCKSOURCE_ITR2 TIM_TS_ITR2 /*!< External clock source mode 1 (ITR2) */ +#define TIM_CLOCKSOURCE_ITR3 TIM_TS_ITR3 /*!< External clock source mode 1 (ITR3) */ +/** + * @} + */ + +/** @defgroup TIM_Clock_Polarity TIM Clock Polarity + * @{ + */ +#define TIM_CLOCKPOLARITY_INVERTED TIM_ETRPOLARITY_INVERTED /*!< Polarity for ETRx clock sources */ +#define TIM_CLOCKPOLARITY_NONINVERTED TIM_ETRPOLARITY_NONINVERTED /*!< Polarity for ETRx clock sources */ +#define TIM_CLOCKPOLARITY_RISING TIM_INPUTCHANNELPOLARITY_RISING /*!< Polarity for TIx clock sources */ +#define TIM_CLOCKPOLARITY_FALLING TIM_INPUTCHANNELPOLARITY_FALLING /*!< Polarity for TIx clock sources */ +#define TIM_CLOCKPOLARITY_BOTHEDGE TIM_INPUTCHANNELPOLARITY_BOTHEDGE /*!< Polarity for TIx clock sources */ +/** + * @} + */ + +/** @defgroup TIM_Clock_Prescaler TIM Clock Prescaler + * @{ + */ +#define TIM_CLOCKPRESCALER_DIV1 TIM_ETRPRESCALER_DIV1 /*!< No prescaler is used */ +#define TIM_CLOCKPRESCALER_DIV2 TIM_ETRPRESCALER_DIV2 /*!< Prescaler for External ETR Clock: Capture performed once every 2 events. */ +#define TIM_CLOCKPRESCALER_DIV4 TIM_ETRPRESCALER_DIV4 /*!< Prescaler for External ETR Clock: Capture performed once every 4 events. */ +#define TIM_CLOCKPRESCALER_DIV8 TIM_ETRPRESCALER_DIV8 /*!< Prescaler for External ETR Clock: Capture performed once every 8 events. */ +/** + * @} + */ + +/** @defgroup TIM_ClearInput_Polarity TIM Clear Input Polarity + * @{ + */ +#define TIM_CLEARINPUTPOLARITY_INVERTED TIM_ETRPOLARITY_INVERTED /*!< Polarity for ETRx pin */ +#define TIM_CLEARINPUTPOLARITY_NONINVERTED TIM_ETRPOLARITY_NONINVERTED /*!< Polarity for ETRx pin */ +/** + * @} + */ + +/** @defgroup TIM_ClearInput_Prescaler TIM Clear Input Prescaler + * @{ + */ +#define TIM_CLEARINPUTPRESCALER_DIV1 TIM_ETRPRESCALER_DIV1 /*!< No prescaler is used */ +#define TIM_CLEARINPUTPRESCALER_DIV2 TIM_ETRPRESCALER_DIV2 /*!< Prescaler for External ETR pin: Capture performed once every 2 events. */ +#define TIM_CLEARINPUTPRESCALER_DIV4 TIM_ETRPRESCALER_DIV4 /*!< Prescaler for External ETR pin: Capture performed once every 4 events. */ +#define TIM_CLEARINPUTPRESCALER_DIV8 TIM_ETRPRESCALER_DIV8 /*!< Prescaler for External ETR pin: Capture performed once every 8 events. */ +/** + * @} + */ + +/** @defgroup TIM_OSSR_Off_State_Selection_for_Run_mode_state TIM OSSR OffState Selection for Run mode state + * @{ + */ +#define TIM_OSSR_ENABLE TIM_BDTR_OSSR /*!< When inactive, OC/OCN outputs are enabled (still controlled by the timer) */ +#define TIM_OSSR_DISABLE 0x00000000U /*!< When inactive, OC/OCN outputs are disabled (not controlled any longer by the timer) */ +/** + * @} + */ + +/** @defgroup TIM_OSSI_Off_State_Selection_for_Idle_mode_state TIM OSSI OffState Selection for Idle mode state + * @{ + */ +#define TIM_OSSI_ENABLE TIM_BDTR_OSSI /*!< When inactive, OC/OCN outputs are enabled (still controlled by the timer) */ +#define TIM_OSSI_DISABLE 0x00000000U /*!< When inactive, OC/OCN outputs are disabled (not controlled any longer by the timer) */ +/** + * @} + */ +/** @defgroup TIM_Lock_level TIM Lock level + * @{ + */ +#define TIM_LOCKLEVEL_OFF 0x00000000U /*!< LOCK OFF */ +#define TIM_LOCKLEVEL_1 TIM_BDTR_LOCK_0 /*!< LOCK Level 1 */ +#define TIM_LOCKLEVEL_2 TIM_BDTR_LOCK_1 /*!< LOCK Level 2 */ +#define TIM_LOCKLEVEL_3 TIM_BDTR_LOCK /*!< LOCK Level 3 */ +/** + * @} + */ + +/** @defgroup TIM_Break_Input_enable_disable TIM Break Input Enable + * @{ + */ +#define TIM_BREAK_ENABLE TIM_BDTR_BKE /*!< Break input BRK is enabled */ +#define TIM_BREAK_DISABLE 0x00000000U /*!< Break input BRK is disabled */ +/** + * @} + */ + +/** @defgroup TIM_Break_Polarity TIM Break Input Polarity + * @{ + */ +#define TIM_BREAKPOLARITY_LOW 0x00000000U /*!< Break input BRK is active low */ +#define TIM_BREAKPOLARITY_HIGH TIM_BDTR_BKP /*!< Break input BRK is active high */ +/** + * @} + */ + +/** @defgroup TIM_Break2_Input_enable_disable TIM Break input 2 Enable + * @{ + */ +#define TIM_BREAK2_DISABLE 0x00000000U /*!< Break input BRK2 is disabled */ +#define TIM_BREAK2_ENABLE TIM_BDTR_BK2E /*!< Break input BRK2 is enabled */ +/** + * @} + */ + +/** @defgroup TIM_Break2_Polarity TIM Break Input 2 Polarity + * @{ + */ +#define TIM_BREAK2POLARITY_LOW 0x00000000U /*!< Break input BRK2 is active low */ +#define TIM_BREAK2POLARITY_HIGH TIM_BDTR_BK2P /*!< Break input BRK2 is active high */ +/** + * @} + */ + +/** @defgroup TIM_AOE_Bit_Set_Reset TIM Automatic Output Enable + * @{ + */ +#define TIM_AUTOMATICOUTPUT_DISABLE 0x00000000U /*!< MOE can be set only by software */ +#define TIM_AUTOMATICOUTPUT_ENABLE TIM_BDTR_AOE /*!< MOE can be set by software or automatically at the next update event (if none of the break inputs BRK and BRK2 is active) */ +/** + * @} + */ + +/** @defgroup TIM_Group_Channel5 TIM Group Channel 5 and Channel 1, 2 or 3 + * @{ + */ +#define TIM_GROUPCH5_NONE 0x00000000U /*!< No effect of OC5REF on OC1REFC, OC2REFC and OC3REFC */ +#define TIM_GROUPCH5_OC1REFC TIM_CCR5_GC5C1 /*!< OC1REFC is the logical AND of OC1REFC and OC5REF */ +#define TIM_GROUPCH5_OC2REFC TIM_CCR5_GC5C2 /*!< OC2REFC is the logical AND of OC2REFC and OC5REF */ +#define TIM_GROUPCH5_OC3REFC TIM_CCR5_GC5C3 /*!< OC3REFC is the logical AND of OC3REFC and OC5REF */ +/** + * @} + */ + +/** @defgroup TIM_Master_Mode_Selection TIM Master Mode Selection + * @{ + */ +#define TIM_TRGO_RESET 0x00000000U /*!< TIMx_EGR.UG bit is used as trigger output (TRGO) */ +#define TIM_TRGO_ENABLE TIM_CR2_MMS_0 /*!< TIMx_CR1.CEN bit is used as trigger output (TRGO) */ +#define TIM_TRGO_UPDATE TIM_CR2_MMS_1 /*!< Update event is used as trigger output (TRGO) */ +#define TIM_TRGO_OC1 (TIM_CR2_MMS_1 | TIM_CR2_MMS_0) /*!< Capture or a compare match 1 is used as trigger output (TRGO) */ +#define TIM_TRGO_OC1REF TIM_CR2_MMS_2 /*!< OC1REF signal is used as trigger output (TRGO) */ +#define TIM_TRGO_OC2REF (TIM_CR2_MMS_2 | TIM_CR2_MMS_0) /*!< OC2REF signal is used as trigger output(TRGO) */ +#define TIM_TRGO_OC3REF (TIM_CR2_MMS_2 | TIM_CR2_MMS_1) /*!< OC3REF signal is used as trigger output(TRGO) */ +#define TIM_TRGO_OC4REF (TIM_CR2_MMS_2 | TIM_CR2_MMS_1 | TIM_CR2_MMS_0) /*!< OC4REF signal is used as trigger output(TRGO) */ +/** + * @} + */ + +/** @defgroup TIM_Master_Mode_Selection_2 TIM Master Mode Selection 2 (TRGO2) + * @{ + */ +#define TIM_TRGO2_RESET 0x00000000U /*!< TIMx_EGR.UG bit is used as trigger output (TRGO2) */ +#define TIM_TRGO2_ENABLE TIM_CR2_MMS2_0 /*!< TIMx_CR1.CEN bit is used as trigger output (TRGO2) */ +#define TIM_TRGO2_UPDATE TIM_CR2_MMS2_1 /*!< Update event is used as trigger output (TRGO2) */ +#define TIM_TRGO2_OC1 (TIM_CR2_MMS2_1 | TIM_CR2_MMS2_0) /*!< Capture or a compare match 1 is used as trigger output (TRGO2) */ +#define TIM_TRGO2_OC1REF TIM_CR2_MMS2_2 /*!< OC1REF signal is used as trigger output (TRGO2) */ +#define TIM_TRGO2_OC2REF (TIM_CR2_MMS2_2 | TIM_CR2_MMS2_0) /*!< OC2REF signal is used as trigger output (TRGO2) */ +#define TIM_TRGO2_OC3REF (TIM_CR2_MMS2_2 | TIM_CR2_MMS2_1) /*!< OC3REF signal is used as trigger output (TRGO2) */ +#define TIM_TRGO2_OC4REF (TIM_CR2_MMS2_2 | TIM_CR2_MMS2_1 | TIM_CR2_MMS2_0) /*!< OC4REF signal is used as trigger output (TRGO2) */ +#define TIM_TRGO2_OC5REF TIM_CR2_MMS2_3 /*!< OC5REF signal is used as trigger output (TRGO2) */ +#define TIM_TRGO2_OC6REF (TIM_CR2_MMS2_3 | TIM_CR2_MMS2_0) /*!< OC6REF signal is used as trigger output (TRGO2) */ +#define TIM_TRGO2_OC4REF_RISINGFALLING (TIM_CR2_MMS2_3 | TIM_CR2_MMS2_1) /*!< OC4REF rising or falling edges generate pulses on TRGO2 */ +#define TIM_TRGO2_OC6REF_RISINGFALLING (TIM_CR2_MMS2_3 | TIM_CR2_MMS2_1 | TIM_CR2_MMS2_0) /*!< OC6REF rising or falling edges generate pulses on TRGO2 */ +#define TIM_TRGO2_OC4REF_RISING_OC6REF_RISING (TIM_CR2_MMS2_3 | TIM_CR2_MMS2_2) /*!< OC4REF or OC6REF rising edges generate pulses on TRGO2 */ +#define TIM_TRGO2_OC4REF_RISING_OC6REF_FALLING (TIM_CR2_MMS2_3 | TIM_CR2_MMS2_2 | TIM_CR2_MMS2_0) /*!< OC4REF rising or OC6REF falling edges generate pulses on TRGO2 */ +#define TIM_TRGO2_OC5REF_RISING_OC6REF_RISING (TIM_CR2_MMS2_3 | TIM_CR2_MMS2_2 |TIM_CR2_MMS2_1) /*!< OC5REF or OC6REF rising edges generate pulses on TRGO2 */ +#define TIM_TRGO2_OC5REF_RISING_OC6REF_FALLING (TIM_CR2_MMS2_3 | TIM_CR2_MMS2_2 | TIM_CR2_MMS2_1 | TIM_CR2_MMS2_0) /*!< OC5REF or OC6REF rising edges generate pulses on TRGO2 */ +/** + * @} + */ + +/** @defgroup TIM_Master_Slave_Mode TIM Master/Slave Mode + * @{ + */ +#define TIM_MASTERSLAVEMODE_ENABLE TIM_SMCR_MSM /*!< No action */ +#define TIM_MASTERSLAVEMODE_DISABLE 0x00000000U /*!< Master/slave mode is selected */ +/** + * @} + */ + +/** @defgroup TIM_Slave_Mode TIM Slave mode + * @{ + */ +#define TIM_SLAVEMODE_DISABLE 0x00000000U /*!< Slave mode disabled */ +#define TIM_SLAVEMODE_RESET TIM_SMCR_SMS_2 /*!< Reset Mode */ +#define TIM_SLAVEMODE_GATED (TIM_SMCR_SMS_2 | TIM_SMCR_SMS_0) /*!< Gated Mode */ +#define TIM_SLAVEMODE_TRIGGER (TIM_SMCR_SMS_2 | TIM_SMCR_SMS_1) /*!< Trigger Mode */ +#define TIM_SLAVEMODE_EXTERNAL1 (TIM_SMCR_SMS_2 | TIM_SMCR_SMS_1 | TIM_SMCR_SMS_0) /*!< External Clock Mode 1 */ +#define TIM_SLAVEMODE_COMBINED_RESETTRIGGER TIM_SMCR_SMS_3 /*!< Combined reset + trigger mode */ +/** + * @} + */ + +/** @defgroup TIM_Output_Compare_and_PWM_modes TIM Output Compare and PWM Modes + * @{ + */ +#define TIM_OCMODE_TIMING 0x00000000U /*!< Frozen */ +#define TIM_OCMODE_ACTIVE TIM_CCMR1_OC1M_0 /*!< Set channel to active level on match */ +#define TIM_OCMODE_INACTIVE TIM_CCMR1_OC1M_1 /*!< Set channel to inactive level on match */ +#define TIM_OCMODE_TOGGLE (TIM_CCMR1_OC1M_1 | TIM_CCMR1_OC1M_0) /*!< Toggle */ +#define TIM_OCMODE_PWM1 (TIM_CCMR1_OC1M_2 | TIM_CCMR1_OC1M_1) /*!< PWM mode 1 */ +#define TIM_OCMODE_PWM2 (TIM_CCMR1_OC1M_2 | TIM_CCMR1_OC1M_1 | TIM_CCMR1_OC1M_0) /*!< PWM mode 2 */ +#define TIM_OCMODE_FORCED_ACTIVE (TIM_CCMR1_OC1M_2 | TIM_CCMR1_OC1M_0) /*!< Force active level */ +#define TIM_OCMODE_FORCED_INACTIVE TIM_CCMR1_OC1M_2 /*!< Force inactive level */ +#define TIM_OCMODE_RETRIGERRABLE_OPM1 TIM_CCMR1_OC1M_3 /*!< Retrigerrable OPM mode 1 */ +#define TIM_OCMODE_RETRIGERRABLE_OPM2 (TIM_CCMR1_OC1M_3 | TIM_CCMR1_OC1M_0) /*!< Retrigerrable OPM mode 2 */ +#define TIM_OCMODE_COMBINED_PWM1 (TIM_CCMR1_OC1M_3 | TIM_CCMR1_OC1M_2) /*!< Combined PWM mode 1 */ +#define TIM_OCMODE_COMBINED_PWM2 (TIM_CCMR1_OC1M_3 | TIM_CCMR1_OC1M_0 | TIM_CCMR1_OC1M_2) /*!< Combined PWM mode 2 */ +#define TIM_OCMODE_ASYMMETRIC_PWM1 (TIM_CCMR1_OC1M_3 | TIM_CCMR1_OC1M_1 | TIM_CCMR1_OC1M_2) /*!< Asymmetric PWM mode 1 */ +#define TIM_OCMODE_ASYMMETRIC_PWM2 TIM_CCMR1_OC1M /*!< Asymmetric PWM mode 2 */ +/** + * @} + */ + +/** @defgroup TIM_Trigger_Selection TIM Trigger Selection + * @{ + */ +#define TIM_TS_ITR0 0x00000000U /*!< Internal Trigger 0 (ITR0) */ +#define TIM_TS_ITR1 TIM_SMCR_TS_0 /*!< Internal Trigger 1 (ITR1) */ +#define TIM_TS_ITR2 TIM_SMCR_TS_1 /*!< Internal Trigger 2 (ITR2) */ +#define TIM_TS_ITR3 (TIM_SMCR_TS_0 | TIM_SMCR_TS_1) /*!< Internal Trigger 3 (ITR3) */ +#define TIM_TS_TI1F_ED TIM_SMCR_TS_2 /*!< TI1 Edge Detector (TI1F_ED) */ +#define TIM_TS_TI1FP1 (TIM_SMCR_TS_0 | TIM_SMCR_TS_2) /*!< Filtered Timer Input 1 (TI1FP1) */ +#define TIM_TS_TI2FP2 (TIM_SMCR_TS_1 | TIM_SMCR_TS_2) /*!< Filtered Timer Input 2 (TI2FP2) */ +#define TIM_TS_ETRF (TIM_SMCR_TS_0 | TIM_SMCR_TS_1 | TIM_SMCR_TS_2) /*!< Filtered External Trigger input (ETRF) */ +#define TIM_TS_NONE 0x0000FFFFU /*!< No trigger selected */ +/** + * @} + */ + +/** @defgroup TIM_Trigger_Polarity TIM Trigger Polarity + * @{ + */ +#define TIM_TRIGGERPOLARITY_INVERTED TIM_ETRPOLARITY_INVERTED /*!< Polarity for ETRx trigger sources */ +#define TIM_TRIGGERPOLARITY_NONINVERTED TIM_ETRPOLARITY_NONINVERTED /*!< Polarity for ETRx trigger sources */ +#define TIM_TRIGGERPOLARITY_RISING TIM_INPUTCHANNELPOLARITY_RISING /*!< Polarity for TIxFPx or TI1_ED trigger sources */ +#define TIM_TRIGGERPOLARITY_FALLING TIM_INPUTCHANNELPOLARITY_FALLING /*!< Polarity for TIxFPx or TI1_ED trigger sources */ +#define TIM_TRIGGERPOLARITY_BOTHEDGE TIM_INPUTCHANNELPOLARITY_BOTHEDGE /*!< Polarity for TIxFPx or TI1_ED trigger sources */ +/** + * @} + */ + +/** @defgroup TIM_Trigger_Prescaler TIM Trigger Prescaler + * @{ + */ +#define TIM_TRIGGERPRESCALER_DIV1 TIM_ETRPRESCALER_DIV1 /*!< No prescaler is used */ +#define TIM_TRIGGERPRESCALER_DIV2 TIM_ETRPRESCALER_DIV2 /*!< Prescaler for External ETR Trigger: Capture performed once every 2 events. */ +#define TIM_TRIGGERPRESCALER_DIV4 TIM_ETRPRESCALER_DIV4 /*!< Prescaler for External ETR Trigger: Capture performed once every 4 events. */ +#define TIM_TRIGGERPRESCALER_DIV8 TIM_ETRPRESCALER_DIV8 /*!< Prescaler for External ETR Trigger: Capture performed once every 8 events. */ +/** + * @} + */ + +/** @defgroup TIM_TI1_Selection TIM TI1 Input Selection + * @{ + */ +#define TIM_TI1SELECTION_CH1 0x00000000U /*!< The TIMx_CH1 pin is connected to TI1 input */ +#define TIM_TI1SELECTION_XORCOMBINATION TIM_CR2_TI1S /*!< The TIMx_CH1, CH2 and CH3 pins are connected to the TI1 input (XOR combination) */ +/** + * @} + */ + +/** @defgroup TIM_DMA_Burst_Length TIM DMA Burst Length + * @{ + */ +#define TIM_DMABURSTLENGTH_1TRANSFER 0x00000000U /*!< The transfer is done to 1 register starting from TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_2TRANSFERS 0x00000100U /*!< The transfer is done to 2 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_3TRANSFERS 0x00000200U /*!< The transfer is done to 3 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_4TRANSFERS 0x00000300U /*!< The transfer is done to 4 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_5TRANSFERS 0x00000400U /*!< The transfer is done to 5 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_6TRANSFERS 0x00000500U /*!< The transfer is done to 6 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_7TRANSFERS 0x00000600U /*!< The transfer is done to 7 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_8TRANSFERS 0x00000700U /*!< The transfer is done to 8 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_9TRANSFERS 0x00000800U /*!< The transfer is done to 9 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_10TRANSFERS 0x00000900U /*!< The transfer is done to 10 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_11TRANSFERS 0x00000A00U /*!< The transfer is done to 11 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_12TRANSFERS 0x00000B00U /*!< The transfer is done to 12 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_13TRANSFERS 0x00000C00U /*!< The transfer is done to 13 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_14TRANSFERS 0x00000D00U /*!< The transfer is done to 14 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_15TRANSFERS 0x00000E00U /*!< The transfer is done to 15 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_16TRANSFERS 0x00000F00U /*!< The transfer is done to 16 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_17TRANSFERS 0x00001000U /*!< The transfer is done to 17 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_18TRANSFERS 0x00001100U /*!< The transfer is done to 18 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ +/** + * @} + */ + +/** @defgroup DMA_Handle_index TIM DMA Handle Index + * @{ + */ +#define TIM_DMA_ID_UPDATE ((uint16_t) 0x0000) /*!< Index of the DMA handle used for Update DMA requests */ +#define TIM_DMA_ID_CC1 ((uint16_t) 0x0001) /*!< Index of the DMA handle used for Capture/Compare 1 DMA requests */ +#define TIM_DMA_ID_CC2 ((uint16_t) 0x0002) /*!< Index of the DMA handle used for Capture/Compare 2 DMA requests */ +#define TIM_DMA_ID_CC3 ((uint16_t) 0x0003) /*!< Index of the DMA handle used for Capture/Compare 3 DMA requests */ +#define TIM_DMA_ID_CC4 ((uint16_t) 0x0004) /*!< Index of the DMA handle used for Capture/Compare 4 DMA requests */ +#define TIM_DMA_ID_COMMUTATION ((uint16_t) 0x0005) /*!< Index of the DMA handle used for Commutation DMA requests */ +#define TIM_DMA_ID_TRIGGER ((uint16_t) 0x0006) /*!< Index of the DMA handle used for Trigger DMA requests */ +/** + * @} + */ + +/** @defgroup Channel_CC_State TIM Capture/Compare Channel State + * @{ + */ +#define TIM_CCx_ENABLE 0x00000001U /*!< Input or output channel is enabled */ +#define TIM_CCx_DISABLE 0x00000000U /*!< Input or output channel is disabled */ +#define TIM_CCxN_ENABLE 0x00000004U /*!< Complementary output channel is enabled */ +#define TIM_CCxN_DISABLE 0x00000000U /*!< Complementary output channel is enabled */ +/** + * @} + */ + +/** @defgroup TIM_Break_System TIM Break System + * @{ + */ +#define TIM_BREAK_SYSTEM_ECC SYSCFG_CFGR2_ECCL /*!< Enables and locks the ECC error signal with Break Input of TIM1/8/15/16/17 */ +#define TIM_BREAK_SYSTEM_PVD SYSCFG_CFGR2_PVDL /*!< Enables and locks the PVD connection with TIM1/8/15/16/17 Break Input and also the PVDE and PLS bits of the Power Control Interface */ +#define TIM_BREAK_SYSTEM_SRAM2_PARITY_ERROR SYSCFG_CFGR2_SPL /*!< Enables and locks the SRAM2_PARITY error signal with Break Input of TIM1/8/15/16/17 */ +#define TIM_BREAK_SYSTEM_LOCKUP SYSCFG_CFGR2_CLL /*!< Enables and locks the LOCKUP output of CortexM4 with Break Input of TIM1/8/15/16/17 */ +/** + * @} + */ + +/** + * @} + */ +/* End of exported constants -------------------------------------------------*/ + +/* Exported macros -----------------------------------------------------------*/ +/** @defgroup TIM_Exported_Macros TIM Exported Macros + * @{ + */ + +/** @brief Reset TIM handle state. + * @param __HANDLE__ TIM handle. + * @retval None + */ +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) +#define __HAL_TIM_RESET_HANDLE_STATE(__HANDLE__) do { \ + (__HANDLE__)->State = HAL_TIM_STATE_RESET; \ + (__HANDLE__)->ChannelState[0] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelState[1] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelState[2] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelState[3] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelState[4] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelState[5] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelNState[0] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelNState[1] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelNState[2] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelNState[3] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->DMABurstState = HAL_DMA_BURST_STATE_RESET; \ + (__HANDLE__)->Base_MspInitCallback = NULL; \ + (__HANDLE__)->Base_MspDeInitCallback = NULL; \ + (__HANDLE__)->IC_MspInitCallback = NULL; \ + (__HANDLE__)->IC_MspDeInitCallback = NULL; \ + (__HANDLE__)->OC_MspInitCallback = NULL; \ + (__HANDLE__)->OC_MspDeInitCallback = NULL; \ + (__HANDLE__)->PWM_MspInitCallback = NULL; \ + (__HANDLE__)->PWM_MspDeInitCallback = NULL; \ + (__HANDLE__)->OnePulse_MspInitCallback = NULL; \ + (__HANDLE__)->OnePulse_MspDeInitCallback = NULL; \ + (__HANDLE__)->Encoder_MspInitCallback = NULL; \ + (__HANDLE__)->Encoder_MspDeInitCallback = NULL; \ + (__HANDLE__)->HallSensor_MspInitCallback = NULL; \ + (__HANDLE__)->HallSensor_MspDeInitCallback = NULL; \ + } while(0) +#else +#define __HAL_TIM_RESET_HANDLE_STATE(__HANDLE__) do { \ + (__HANDLE__)->State = HAL_TIM_STATE_RESET; \ + (__HANDLE__)->ChannelState[0] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelState[1] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelState[2] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelState[3] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelState[4] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelState[5] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelNState[0] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelNState[1] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelNState[2] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelNState[3] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->DMABurstState = HAL_DMA_BURST_STATE_RESET; \ + } while(0) +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + +/** + * @brief Enable the TIM peripheral. + * @param __HANDLE__ TIM handle + * @retval None + */ +#define __HAL_TIM_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1|=(TIM_CR1_CEN)) + +/** + * @brief Enable the TIM main Output. + * @param __HANDLE__ TIM handle + * @retval None + */ +#define __HAL_TIM_MOE_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->BDTR|=(TIM_BDTR_MOE)) + +/** + * @brief Disable the TIM peripheral. + * @param __HANDLE__ TIM handle + * @retval None + */ +#define __HAL_TIM_DISABLE(__HANDLE__) \ + do { \ + if (((__HANDLE__)->Instance->CCER & TIM_CCER_CCxE_MASK) == 0UL) \ + { \ + if(((__HANDLE__)->Instance->CCER & TIM_CCER_CCxNE_MASK) == 0UL) \ + { \ + (__HANDLE__)->Instance->CR1 &= ~(TIM_CR1_CEN); \ + } \ + } \ + } while(0) + +/** + * @brief Disable the TIM main Output. + * @param __HANDLE__ TIM handle + * @retval None + * @note The Main Output Enable of a timer instance is disabled only if all the CCx and CCxN channels have been + * disabled + */ +#define __HAL_TIM_MOE_DISABLE(__HANDLE__) \ + do { \ + if (((__HANDLE__)->Instance->CCER & TIM_CCER_CCxE_MASK) == 0UL) \ + { \ + if(((__HANDLE__)->Instance->CCER & TIM_CCER_CCxNE_MASK) == 0UL) \ + { \ + (__HANDLE__)->Instance->BDTR &= ~(TIM_BDTR_MOE); \ + } \ + } \ + } while(0) + +/** + * @brief Disable the TIM main Output. + * @param __HANDLE__ TIM handle + * @retval None + * @note The Main Output Enable of a timer instance is disabled unconditionally + */ +#define __HAL_TIM_MOE_DISABLE_UNCONDITIONALLY(__HANDLE__) (__HANDLE__)->Instance->BDTR &= ~(TIM_BDTR_MOE) + +/** @brief Enable the specified TIM interrupt. + * @param __HANDLE__ specifies the TIM Handle. + * @param __INTERRUPT__ specifies the TIM interrupt source to enable. + * This parameter can be one of the following values: + * @arg TIM_IT_UPDATE: Update interrupt + * @arg TIM_IT_CC1: Capture/Compare 1 interrupt + * @arg TIM_IT_CC2: Capture/Compare 2 interrupt + * @arg TIM_IT_CC3: Capture/Compare 3 interrupt + * @arg TIM_IT_CC4: Capture/Compare 4 interrupt + * @arg TIM_IT_COM: Commutation interrupt + * @arg TIM_IT_TRIGGER: Trigger interrupt + * @arg TIM_IT_BREAK: Break interrupt + * @retval None + */ +#define __HAL_TIM_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->DIER |= (__INTERRUPT__)) + +/** @brief Disable the specified TIM interrupt. + * @param __HANDLE__ specifies the TIM Handle. + * @param __INTERRUPT__ specifies the TIM interrupt source to disable. + * This parameter can be one of the following values: + * @arg TIM_IT_UPDATE: Update interrupt + * @arg TIM_IT_CC1: Capture/Compare 1 interrupt + * @arg TIM_IT_CC2: Capture/Compare 2 interrupt + * @arg TIM_IT_CC3: Capture/Compare 3 interrupt + * @arg TIM_IT_CC4: Capture/Compare 4 interrupt + * @arg TIM_IT_COM: Commutation interrupt + * @arg TIM_IT_TRIGGER: Trigger interrupt + * @arg TIM_IT_BREAK: Break interrupt + * @retval None + */ +#define __HAL_TIM_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->DIER &= ~(__INTERRUPT__)) + +/** @brief Enable the specified DMA request. + * @param __HANDLE__ specifies the TIM Handle. + * @param __DMA__ specifies the TIM DMA request to enable. + * This parameter can be one of the following values: + * @arg TIM_DMA_UPDATE: Update DMA request + * @arg TIM_DMA_CC1: Capture/Compare 1 DMA request + * @arg TIM_DMA_CC2: Capture/Compare 2 DMA request + * @arg TIM_DMA_CC3: Capture/Compare 3 DMA request + * @arg TIM_DMA_CC4: Capture/Compare 4 DMA request + * @arg TIM_DMA_COM: Commutation DMA request + * @arg TIM_DMA_TRIGGER: Trigger DMA request + * @retval None + */ +#define __HAL_TIM_ENABLE_DMA(__HANDLE__, __DMA__) ((__HANDLE__)->Instance->DIER |= (__DMA__)) + +/** @brief Disable the specified DMA request. + * @param __HANDLE__ specifies the TIM Handle. + * @param __DMA__ specifies the TIM DMA request to disable. + * This parameter can be one of the following values: + * @arg TIM_DMA_UPDATE: Update DMA request + * @arg TIM_DMA_CC1: Capture/Compare 1 DMA request + * @arg TIM_DMA_CC2: Capture/Compare 2 DMA request + * @arg TIM_DMA_CC3: Capture/Compare 3 DMA request + * @arg TIM_DMA_CC4: Capture/Compare 4 DMA request + * @arg TIM_DMA_COM: Commutation DMA request + * @arg TIM_DMA_TRIGGER: Trigger DMA request + * @retval None + */ +#define __HAL_TIM_DISABLE_DMA(__HANDLE__, __DMA__) ((__HANDLE__)->Instance->DIER &= ~(__DMA__)) + +/** @brief Check whether the specified TIM interrupt flag is set or not. + * @param __HANDLE__ specifies the TIM Handle. + * @param __FLAG__ specifies the TIM interrupt flag to check. + * This parameter can be one of the following values: + * @arg TIM_FLAG_UPDATE: Update interrupt flag + * @arg TIM_FLAG_CC1: Capture/Compare 1 interrupt flag + * @arg TIM_FLAG_CC2: Capture/Compare 2 interrupt flag + * @arg TIM_FLAG_CC3: Capture/Compare 3 interrupt flag + * @arg TIM_FLAG_CC4: Capture/Compare 4 interrupt flag + * @arg TIM_FLAG_CC5: Compare 5 interrupt flag + * @arg TIM_FLAG_CC6: Compare 6 interrupt flag + * @arg TIM_FLAG_COM: Commutation interrupt flag + * @arg TIM_FLAG_TRIGGER: Trigger interrupt flag + * @arg TIM_FLAG_BREAK: Break interrupt flag + * @arg TIM_FLAG_BREAK2: Break 2 interrupt flag + * @arg TIM_FLAG_SYSTEM_BREAK: System Break interrupt flag + * @arg TIM_FLAG_CC1OF: Capture/Compare 1 overcapture flag + * @arg TIM_FLAG_CC2OF: Capture/Compare 2 overcapture flag + * @arg TIM_FLAG_CC3OF: Capture/Compare 3 overcapture flag + * @arg TIM_FLAG_CC4OF: Capture/Compare 4 overcapture flag + * @retval The new state of __FLAG__ (TRUE or FALSE). + */ +#define __HAL_TIM_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR &(__FLAG__)) == (__FLAG__)) + +/** @brief Clear the specified TIM interrupt flag. + * @param __HANDLE__ specifies the TIM Handle. + * @param __FLAG__ specifies the TIM interrupt flag to clear. + * This parameter can be one of the following values: + * @arg TIM_FLAG_UPDATE: Update interrupt flag + * @arg TIM_FLAG_CC1: Capture/Compare 1 interrupt flag + * @arg TIM_FLAG_CC2: Capture/Compare 2 interrupt flag + * @arg TIM_FLAG_CC3: Capture/Compare 3 interrupt flag + * @arg TIM_FLAG_CC4: Capture/Compare 4 interrupt flag + * @arg TIM_FLAG_CC5: Compare 5 interrupt flag + * @arg TIM_FLAG_CC6: Compare 6 interrupt flag + * @arg TIM_FLAG_COM: Commutation interrupt flag + * @arg TIM_FLAG_TRIGGER: Trigger interrupt flag + * @arg TIM_FLAG_BREAK: Break interrupt flag + * @arg TIM_FLAG_BREAK2: Break 2 interrupt flag + * @arg TIM_FLAG_SYSTEM_BREAK: System Break interrupt flag + * @arg TIM_FLAG_CC1OF: Capture/Compare 1 overcapture flag + * @arg TIM_FLAG_CC2OF: Capture/Compare 2 overcapture flag + * @arg TIM_FLAG_CC3OF: Capture/Compare 3 overcapture flag + * @arg TIM_FLAG_CC4OF: Capture/Compare 4 overcapture flag + * @retval The new state of __FLAG__ (TRUE or FALSE). + */ +#define __HAL_TIM_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->SR = ~(__FLAG__)) + +/** + * @brief Check whether the specified TIM interrupt source is enabled or not. + * @param __HANDLE__ TIM handle + * @param __INTERRUPT__ specifies the TIM interrupt source to check. + * This parameter can be one of the following values: + * @arg TIM_IT_UPDATE: Update interrupt + * @arg TIM_IT_CC1: Capture/Compare 1 interrupt + * @arg TIM_IT_CC2: Capture/Compare 2 interrupt + * @arg TIM_IT_CC3: Capture/Compare 3 interrupt + * @arg TIM_IT_CC4: Capture/Compare 4 interrupt + * @arg TIM_IT_COM: Commutation interrupt + * @arg TIM_IT_TRIGGER: Trigger interrupt + * @arg TIM_IT_BREAK: Break interrupt + * @retval The state of TIM_IT (SET or RESET). + */ +#define __HAL_TIM_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->DIER & (__INTERRUPT__)) \ + == (__INTERRUPT__)) ? SET : RESET) + +/** @brief Clear the TIM interrupt pending bits. + * @param __HANDLE__ TIM handle + * @param __INTERRUPT__ specifies the interrupt pending bit to clear. + * This parameter can be one of the following values: + * @arg TIM_IT_UPDATE: Update interrupt + * @arg TIM_IT_CC1: Capture/Compare 1 interrupt + * @arg TIM_IT_CC2: Capture/Compare 2 interrupt + * @arg TIM_IT_CC3: Capture/Compare 3 interrupt + * @arg TIM_IT_CC4: Capture/Compare 4 interrupt + * @arg TIM_IT_COM: Commutation interrupt + * @arg TIM_IT_TRIGGER: Trigger interrupt + * @arg TIM_IT_BREAK: Break interrupt + * @retval None + */ +#define __HAL_TIM_CLEAR_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->SR = ~(__INTERRUPT__)) + +/** + * @brief Force a continuous copy of the update interrupt flag (UIF) into the timer counter register (bit 31). + * @note This allows both the counter value and a potential roll-over condition signalled by the UIFCPY flag to be read + * in an atomic way. + * @param __HANDLE__ TIM handle. + * @retval None +mode. + */ +#define __HAL_TIM_UIFREMAP_ENABLE(__HANDLE__) (((__HANDLE__)->Instance->CR1 |= TIM_CR1_UIFREMAP)) + +/** + * @brief Disable update interrupt flag (UIF) remapping. + * @param __HANDLE__ TIM handle. + * @retval None +mode. + */ +#define __HAL_TIM_UIFREMAP_DISABLE(__HANDLE__) (((__HANDLE__)->Instance->CR1 &= ~TIM_CR1_UIFREMAP)) + +/** + * @brief Get update interrupt flag (UIF) copy status. + * @param __COUNTER__ Counter value. + * @retval The state of UIFCPY (TRUE or FALSE). +mode. + */ +#define __HAL_TIM_GET_UIFCPY(__COUNTER__) (((__COUNTER__) & (TIM_CNT_UIFCPY)) == (TIM_CNT_UIFCPY)) + +/** + * @brief Indicates whether or not the TIM Counter is used as downcounter. + * @param __HANDLE__ TIM handle. + * @retval False (Counter used as upcounter) or True (Counter used as downcounter) + * @note This macro is particularly useful to get the counting mode when the timer operates in Center-aligned mode + * or Encoder mode. + */ +#define __HAL_TIM_IS_TIM_COUNTING_DOWN(__HANDLE__) (((__HANDLE__)->Instance->CR1 &(TIM_CR1_DIR)) == (TIM_CR1_DIR)) + +/** + * @brief Set the TIM Prescaler on runtime. + * @param __HANDLE__ TIM handle. + * @param __PRESC__ specifies the Prescaler new value. + * @retval None + */ +#define __HAL_TIM_SET_PRESCALER(__HANDLE__, __PRESC__) ((__HANDLE__)->Instance->PSC = (__PRESC__)) + +/** + * @brief Set the TIM Counter Register value on runtime. + * Note Please check if the bit 31 of CNT register is used as UIF copy or not, this may affect the counter range in + * case of 32 bits counter TIM instance. + * Bit 31 of CNT can be enabled/disabled using __HAL_TIM_UIFREMAP_ENABLE()/__HAL_TIM_UIFREMAP_DISABLE() macros. + * @param __HANDLE__ TIM handle. + * @param __COUNTER__ specifies the Counter register new value. + * @retval None + */ +#define __HAL_TIM_SET_COUNTER(__HANDLE__, __COUNTER__) ((__HANDLE__)->Instance->CNT = (__COUNTER__)) + +/** + * @brief Get the TIM Counter Register value on runtime. + * @param __HANDLE__ TIM handle. + * @retval 16-bit or 32-bit value of the timer counter register (TIMx_CNT) + */ +#define __HAL_TIM_GET_COUNTER(__HANDLE__) ((__HANDLE__)->Instance->CNT) + +/** + * @brief Set the TIM Autoreload Register value on runtime without calling another time any Init function. + * @param __HANDLE__ TIM handle. + * @param __AUTORELOAD__ specifies the Counter register new value. + * @retval None + */ +#define __HAL_TIM_SET_AUTORELOAD(__HANDLE__, __AUTORELOAD__) \ + do{ \ + (__HANDLE__)->Instance->ARR = (__AUTORELOAD__); \ + (__HANDLE__)->Init.Period = (__AUTORELOAD__); \ + } while(0) + +/** + * @brief Get the TIM Autoreload Register value on runtime. + * @param __HANDLE__ TIM handle. + * @retval 16-bit or 32-bit value of the timer auto-reload register(TIMx_ARR) + */ +#define __HAL_TIM_GET_AUTORELOAD(__HANDLE__) ((__HANDLE__)->Instance->ARR) + +/** + * @brief Set the TIM Clock Division value on runtime without calling another time any Init function. + * @param __HANDLE__ TIM handle. + * @param __CKD__ specifies the clock division value. + * This parameter can be one of the following value: + * @arg TIM_CLOCKDIVISION_DIV1: tDTS=tCK_INT + * @arg TIM_CLOCKDIVISION_DIV2: tDTS=2*tCK_INT + * @arg TIM_CLOCKDIVISION_DIV4: tDTS=4*tCK_INT + * @retval None + */ +#define __HAL_TIM_SET_CLOCKDIVISION(__HANDLE__, __CKD__) \ + do{ \ + (__HANDLE__)->Instance->CR1 &= (~TIM_CR1_CKD); \ + (__HANDLE__)->Instance->CR1 |= (__CKD__); \ + (__HANDLE__)->Init.ClockDivision = (__CKD__); \ + } while(0) + +/** + * @brief Get the TIM Clock Division value on runtime. + * @param __HANDLE__ TIM handle. + * @retval The clock division can be one of the following values: + * @arg TIM_CLOCKDIVISION_DIV1: tDTS=tCK_INT + * @arg TIM_CLOCKDIVISION_DIV2: tDTS=2*tCK_INT + * @arg TIM_CLOCKDIVISION_DIV4: tDTS=4*tCK_INT + */ +#define __HAL_TIM_GET_CLOCKDIVISION(__HANDLE__) ((__HANDLE__)->Instance->CR1 & TIM_CR1_CKD) + +/** + * @brief Set the TIM Input Capture prescaler on runtime without calling another time HAL_TIM_IC_ConfigChannel() + * function. + * @param __HANDLE__ TIM handle. + * @param __CHANNEL__ TIM Channels to be configured. + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @param __ICPSC__ specifies the Input Capture4 prescaler new value. + * This parameter can be one of the following values: + * @arg TIM_ICPSC_DIV1: no prescaler + * @arg TIM_ICPSC_DIV2: capture is done once every 2 events + * @arg TIM_ICPSC_DIV4: capture is done once every 4 events + * @arg TIM_ICPSC_DIV8: capture is done once every 8 events + * @retval None + */ +#define __HAL_TIM_SET_ICPRESCALER(__HANDLE__, __CHANNEL__, __ICPSC__) \ + do{ \ + TIM_RESET_ICPRESCALERVALUE((__HANDLE__), (__CHANNEL__)); \ + TIM_SET_ICPRESCALERVALUE((__HANDLE__), (__CHANNEL__), (__ICPSC__)); \ + } while(0) + +/** + * @brief Get the TIM Input Capture prescaler on runtime. + * @param __HANDLE__ TIM handle. + * @param __CHANNEL__ TIM Channels to be configured. + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: get input capture 1 prescaler value + * @arg TIM_CHANNEL_2: get input capture 2 prescaler value + * @arg TIM_CHANNEL_3: get input capture 3 prescaler value + * @arg TIM_CHANNEL_4: get input capture 4 prescaler value + * @retval The input capture prescaler can be one of the following values: + * @arg TIM_ICPSC_DIV1: no prescaler + * @arg TIM_ICPSC_DIV2: capture is done once every 2 events + * @arg TIM_ICPSC_DIV4: capture is done once every 4 events + * @arg TIM_ICPSC_DIV8: capture is done once every 8 events + */ +#define __HAL_TIM_GET_ICPRESCALER(__HANDLE__, __CHANNEL__) \ + (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 & TIM_CCMR1_IC1PSC) :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? (((__HANDLE__)->Instance->CCMR1 & TIM_CCMR1_IC2PSC) >> 8U) :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 & TIM_CCMR2_IC3PSC) :\ + (((__HANDLE__)->Instance->CCMR2 & TIM_CCMR2_IC4PSC)) >> 8U) + +/** + * @brief Set the TIM Capture Compare Register value on runtime without calling another time ConfigChannel function. + * @param __HANDLE__ TIM handle. + * @param __CHANNEL__ TIM Channels to be configured. + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @arg TIM_CHANNEL_5: TIM Channel 5 selected + * @arg TIM_CHANNEL_6: TIM Channel 6 selected + * @param __COMPARE__ specifies the Capture Compare register new value. + * @retval None + */ +#define __HAL_TIM_SET_COMPARE(__HANDLE__, __CHANNEL__, __COMPARE__) \ + (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCR1 = (__COMPARE__)) :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCR2 = (__COMPARE__)) :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCR3 = (__COMPARE__)) :\ + ((__CHANNEL__) == TIM_CHANNEL_4) ? ((__HANDLE__)->Instance->CCR4 = (__COMPARE__)) :\ + ((__CHANNEL__) == TIM_CHANNEL_5) ? ((__HANDLE__)->Instance->CCR5 = (__COMPARE__)) :\ + ((__HANDLE__)->Instance->CCR6 = (__COMPARE__))) + +/** + * @brief Get the TIM Capture Compare Register value on runtime. + * @param __HANDLE__ TIM handle. + * @param __CHANNEL__ TIM Channel associated with the capture compare register + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: get capture/compare 1 register value + * @arg TIM_CHANNEL_2: get capture/compare 2 register value + * @arg TIM_CHANNEL_3: get capture/compare 3 register value + * @arg TIM_CHANNEL_4: get capture/compare 4 register value + * @arg TIM_CHANNEL_5: get capture/compare 5 register value + * @arg TIM_CHANNEL_6: get capture/compare 6 register value + * @retval 16-bit or 32-bit value of the capture/compare register (TIMx_CCRy) + */ +#define __HAL_TIM_GET_COMPARE(__HANDLE__, __CHANNEL__) \ + (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCR1) :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCR2) :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCR3) :\ + ((__CHANNEL__) == TIM_CHANNEL_4) ? ((__HANDLE__)->Instance->CCR4) :\ + ((__CHANNEL__) == TIM_CHANNEL_5) ? ((__HANDLE__)->Instance->CCR5) :\ + ((__HANDLE__)->Instance->CCR6)) + +/** + * @brief Set the TIM Output compare preload. + * @param __HANDLE__ TIM handle. + * @param __CHANNEL__ TIM Channels to be configured. + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @arg TIM_CHANNEL_5: TIM Channel 5 selected + * @arg TIM_CHANNEL_6: TIM Channel 6 selected + * @retval None + */ +#define __HAL_TIM_ENABLE_OCxPRELOAD(__HANDLE__, __CHANNEL__) \ + (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 |= TIM_CCMR1_OC1PE) :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 |= TIM_CCMR1_OC2PE) :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 |= TIM_CCMR2_OC3PE) :\ + ((__CHANNEL__) == TIM_CHANNEL_4) ? ((__HANDLE__)->Instance->CCMR2 |= TIM_CCMR2_OC4PE) :\ + ((__CHANNEL__) == TIM_CHANNEL_5) ? ((__HANDLE__)->Instance->CCMR3 |= TIM_CCMR3_OC5PE) :\ + ((__HANDLE__)->Instance->CCMR3 |= TIM_CCMR3_OC6PE)) + +/** + * @brief Reset the TIM Output compare preload. + * @param __HANDLE__ TIM handle. + * @param __CHANNEL__ TIM Channels to be configured. + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @arg TIM_CHANNEL_5: TIM Channel 5 selected + * @arg TIM_CHANNEL_6: TIM Channel 6 selected + * @retval None + */ +#define __HAL_TIM_DISABLE_OCxPRELOAD(__HANDLE__, __CHANNEL__) \ + (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 &= ~TIM_CCMR1_OC1PE) :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 &= ~TIM_CCMR1_OC2PE) :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 &= ~TIM_CCMR2_OC3PE) :\ + ((__CHANNEL__) == TIM_CHANNEL_4) ? ((__HANDLE__)->Instance->CCMR2 &= ~TIM_CCMR2_OC4PE) :\ + ((__CHANNEL__) == TIM_CHANNEL_5) ? ((__HANDLE__)->Instance->CCMR3 &= ~TIM_CCMR3_OC5PE) :\ + ((__HANDLE__)->Instance->CCMR3 &= ~TIM_CCMR3_OC6PE)) + +/** + * @brief Enable fast mode for a given channel. + * @param __HANDLE__ TIM handle. + * @param __CHANNEL__ TIM Channels to be configured. + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @arg TIM_CHANNEL_5: TIM Channel 5 selected + * @arg TIM_CHANNEL_6: TIM Channel 6 selected + * @note When fast mode is enabled an active edge on the trigger input acts + * like a compare match on CCx output. Delay to sample the trigger + * input and to activate CCx output is reduced to 3 clock cycles. + * @note Fast mode acts only if the channel is configured in PWM1 or PWM2 mode. + * @retval None + */ +#define __HAL_TIM_ENABLE_OCxFAST(__HANDLE__, __CHANNEL__) \ + (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 |= TIM_CCMR1_OC1FE) :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 |= TIM_CCMR1_OC2FE) :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 |= TIM_CCMR2_OC3FE) :\ + ((__CHANNEL__) == TIM_CHANNEL_4) ? ((__HANDLE__)->Instance->CCMR2 |= TIM_CCMR2_OC4FE) :\ + ((__CHANNEL__) == TIM_CHANNEL_5) ? ((__HANDLE__)->Instance->CCMR3 |= TIM_CCMR3_OC5FE) :\ + ((__HANDLE__)->Instance->CCMR3 |= TIM_CCMR3_OC6FE)) + +/** + * @brief Disable fast mode for a given channel. + * @param __HANDLE__ TIM handle. + * @param __CHANNEL__ TIM Channels to be configured. + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @arg TIM_CHANNEL_5: TIM Channel 5 selected + * @arg TIM_CHANNEL_6: TIM Channel 6 selected + * @note When fast mode is disabled CCx output behaves normally depending + * on counter and CCRx values even when the trigger is ON. The minimum + * delay to activate CCx output when an active edge occurs on the + * trigger input is 5 clock cycles. + * @retval None + */ +#define __HAL_TIM_DISABLE_OCxFAST(__HANDLE__, __CHANNEL__) \ + (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 &= ~TIM_CCMR1_OC1FE) :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 &= ~TIM_CCMR1_OC2FE) :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 &= ~TIM_CCMR2_OC3FE) :\ + ((__CHANNEL__) == TIM_CHANNEL_4) ? ((__HANDLE__)->Instance->CCMR2 &= ~TIM_CCMR2_OC4FE) :\ + ((__CHANNEL__) == TIM_CHANNEL_5) ? ((__HANDLE__)->Instance->CCMR3 &= ~TIM_CCMR3_OC5FE) :\ + ((__HANDLE__)->Instance->CCMR3 &= ~TIM_CCMR3_OC6FE)) + +/** + * @brief Set the Update Request Source (URS) bit of the TIMx_CR1 register. + * @param __HANDLE__ TIM handle. + * @note When the URS bit of the TIMx_CR1 register is set, only counter + * overflow/underflow generates an update interrupt or DMA request (if + * enabled) + * @retval None + */ +#define __HAL_TIM_URS_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1|= TIM_CR1_URS) + +/** + * @brief Reset the Update Request Source (URS) bit of the TIMx_CR1 register. + * @param __HANDLE__ TIM handle. + * @note When the URS bit of the TIMx_CR1 register is reset, any of the + * following events generate an update interrupt or DMA request (if + * enabled): + * _ Counter overflow underflow + * _ Setting the UG bit + * _ Update generation through the slave mode controller + * @retval None + */ +#define __HAL_TIM_URS_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1&=~TIM_CR1_URS) + +/** + * @brief Set the TIM Capture x input polarity on runtime. + * @param __HANDLE__ TIM handle. + * @param __CHANNEL__ TIM Channels to be configured. + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @param __POLARITY__ Polarity for TIx source + * @arg TIM_INPUTCHANNELPOLARITY_RISING: Rising Edge + * @arg TIM_INPUTCHANNELPOLARITY_FALLING: Falling Edge + * @arg TIM_INPUTCHANNELPOLARITY_BOTHEDGE: Rising and Falling Edge + * @retval None + */ +#define __HAL_TIM_SET_CAPTUREPOLARITY(__HANDLE__, __CHANNEL__, __POLARITY__) \ + do{ \ + TIM_RESET_CAPTUREPOLARITY((__HANDLE__), (__CHANNEL__)); \ + TIM_SET_CAPTUREPOLARITY((__HANDLE__), (__CHANNEL__), (__POLARITY__)); \ + }while(0) + +/** @brief Select the Capture/compare DMA request source. + * @param __HANDLE__ specifies the TIM Handle. + * @param __CCDMA__ specifies Capture/compare DMA request source + * This parameter can be one of the following values: + * @arg TIM_CCDMAREQUEST_CC: CCx DMA request generated on Capture/Compare event + * @arg TIM_CCDMAREQUEST_UPDATE: CCx DMA request generated on Update event + * @retval None + */ +#define __HAL_TIM_SELECT_CCDMAREQUEST(__HANDLE__, __CCDMA__) \ + MODIFY_REG((__HANDLE__)->Instance->CR2, TIM_CR2_CCDS, (__CCDMA__)) + +/** + * @} + */ +/* End of exported macros ----------------------------------------------------*/ + +/* Private constants ---------------------------------------------------------*/ +/** @defgroup TIM_Private_Constants TIM Private Constants + * @{ + */ +/* The counter of a timer instance is disabled only if all the CCx and CCxN + channels have been disabled */ +#define TIM_CCER_CCxE_MASK ((uint32_t)(TIM_CCER_CC1E | TIM_CCER_CC2E | TIM_CCER_CC3E | TIM_CCER_CC4E)) +#define TIM_CCER_CCxNE_MASK ((uint32_t)(TIM_CCER_CC1NE | TIM_CCER_CC2NE | TIM_CCER_CC3NE)) +/** + * @} + */ +/* End of private constants --------------------------------------------------*/ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup TIM_Private_Macros TIM Private Macros + * @{ + */ +#define IS_TIM_CLEARINPUT_SOURCE(__MODE__) (((__MODE__) == TIM_CLEARINPUTSOURCE_ETR) || \ + ((__MODE__) == TIM_CLEARINPUTSOURCE_OCREFCLR) || \ + ((__MODE__) == TIM_CLEARINPUTSOURCE_NONE)) + +#define IS_TIM_DMA_BASE(__BASE__) (((__BASE__) == TIM_DMABASE_CR1) || \ + ((__BASE__) == TIM_DMABASE_CR2) || \ + ((__BASE__) == TIM_DMABASE_SMCR) || \ + ((__BASE__) == TIM_DMABASE_DIER) || \ + ((__BASE__) == TIM_DMABASE_SR) || \ + ((__BASE__) == TIM_DMABASE_EGR) || \ + ((__BASE__) == TIM_DMABASE_CCMR1) || \ + ((__BASE__) == TIM_DMABASE_CCMR2) || \ + ((__BASE__) == TIM_DMABASE_CCER) || \ + ((__BASE__) == TIM_DMABASE_CNT) || \ + ((__BASE__) == TIM_DMABASE_PSC) || \ + ((__BASE__) == TIM_DMABASE_ARR) || \ + ((__BASE__) == TIM_DMABASE_RCR) || \ + ((__BASE__) == TIM_DMABASE_CCR1) || \ + ((__BASE__) == TIM_DMABASE_CCR2) || \ + ((__BASE__) == TIM_DMABASE_CCR3) || \ + ((__BASE__) == TIM_DMABASE_CCR4) || \ + ((__BASE__) == TIM_DMABASE_BDTR) || \ + ((__BASE__) == TIM_DMABASE_OR1) || \ + ((__BASE__) == TIM_DMABASE_CCMR3) || \ + ((__BASE__) == TIM_DMABASE_CCR5) || \ + ((__BASE__) == TIM_DMABASE_CCR6) || \ + ((__BASE__) == TIM_DMABASE_OR2) || \ + ((__BASE__) == TIM_DMABASE_OR3)) + +#define IS_TIM_EVENT_SOURCE(__SOURCE__) ((((__SOURCE__) & 0xFFFFFE00U) == 0x00000000U) && ((__SOURCE__) != 0x00000000U)) + +#define IS_TIM_COUNTER_MODE(__MODE__) (((__MODE__) == TIM_COUNTERMODE_UP) || \ + ((__MODE__) == TIM_COUNTERMODE_DOWN) || \ + ((__MODE__) == TIM_COUNTERMODE_CENTERALIGNED1) || \ + ((__MODE__) == TIM_COUNTERMODE_CENTERALIGNED2) || \ + ((__MODE__) == TIM_COUNTERMODE_CENTERALIGNED3)) + +#define IS_TIM_UIFREMAP_MODE(__MODE__) (((__MODE__) == TIM_UIFREMAP_DISABLE) || \ + ((__MODE__) == TIM_UIFREMAP_ENABLE)) + +#define IS_TIM_CLOCKDIVISION_DIV(__DIV__) (((__DIV__) == TIM_CLOCKDIVISION_DIV1) || \ + ((__DIV__) == TIM_CLOCKDIVISION_DIV2) || \ + ((__DIV__) == TIM_CLOCKDIVISION_DIV4)) + +#define IS_TIM_AUTORELOAD_PRELOAD(PRELOAD) (((PRELOAD) == TIM_AUTORELOAD_PRELOAD_DISABLE) || \ + ((PRELOAD) == TIM_AUTORELOAD_PRELOAD_ENABLE)) + +#define IS_TIM_FAST_STATE(__STATE__) (((__STATE__) == TIM_OCFAST_DISABLE) || \ + ((__STATE__) == TIM_OCFAST_ENABLE)) + +#define IS_TIM_OC_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_OCPOLARITY_HIGH) || \ + ((__POLARITY__) == TIM_OCPOLARITY_LOW)) + +#define IS_TIM_OCN_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_OCNPOLARITY_HIGH) || \ + ((__POLARITY__) == TIM_OCNPOLARITY_LOW)) + +#define IS_TIM_OCIDLE_STATE(__STATE__) (((__STATE__) == TIM_OCIDLESTATE_SET) || \ + ((__STATE__) == TIM_OCIDLESTATE_RESET)) + +#define IS_TIM_OCNIDLE_STATE(__STATE__) (((__STATE__) == TIM_OCNIDLESTATE_SET) || \ + ((__STATE__) == TIM_OCNIDLESTATE_RESET)) + +#define IS_TIM_ENCODERINPUT_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_ENCODERINPUTPOLARITY_RISING) || \ + ((__POLARITY__) == TIM_ENCODERINPUTPOLARITY_FALLING)) + +#define IS_TIM_IC_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_ICPOLARITY_RISING) || \ + ((__POLARITY__) == TIM_ICPOLARITY_FALLING) || \ + ((__POLARITY__) == TIM_ICPOLARITY_BOTHEDGE)) + +#define IS_TIM_IC_SELECTION(__SELECTION__) (((__SELECTION__) == TIM_ICSELECTION_DIRECTTI) || \ + ((__SELECTION__) == TIM_ICSELECTION_INDIRECTTI) || \ + ((__SELECTION__) == TIM_ICSELECTION_TRC)) + +#define IS_TIM_IC_PRESCALER(__PRESCALER__) (((__PRESCALER__) == TIM_ICPSC_DIV1) || \ + ((__PRESCALER__) == TIM_ICPSC_DIV2) || \ + ((__PRESCALER__) == TIM_ICPSC_DIV4) || \ + ((__PRESCALER__) == TIM_ICPSC_DIV8)) + +#define IS_TIM_CCX_CHANNEL(__INSTANCE__, __CHANNEL__) (IS_TIM_CCX_INSTANCE(__INSTANCE__, __CHANNEL__) && \ + ((__CHANNEL__) != (TIM_CHANNEL_5)) && \ + ((__CHANNEL__) != (TIM_CHANNEL_6))) + +#define IS_TIM_OPM_MODE(__MODE__) (((__MODE__) == TIM_OPMODE_SINGLE) || \ + ((__MODE__) == TIM_OPMODE_REPETITIVE)) + +#define IS_TIM_ENCODER_MODE(__MODE__) (((__MODE__) == TIM_ENCODERMODE_TI1) || \ + ((__MODE__) == TIM_ENCODERMODE_TI2) || \ + ((__MODE__) == TIM_ENCODERMODE_TI12)) + +#define IS_TIM_DMA_SOURCE(__SOURCE__) ((((__SOURCE__) & 0xFFFF80FFU) == 0x00000000U) && ((__SOURCE__) != 0x00000000U)) + +#define IS_TIM_CHANNELS(__CHANNEL__) (((__CHANNEL__) == TIM_CHANNEL_1) || \ + ((__CHANNEL__) == TIM_CHANNEL_2) || \ + ((__CHANNEL__) == TIM_CHANNEL_3) || \ + ((__CHANNEL__) == TIM_CHANNEL_4) || \ + ((__CHANNEL__) == TIM_CHANNEL_5) || \ + ((__CHANNEL__) == TIM_CHANNEL_6) || \ + ((__CHANNEL__) == TIM_CHANNEL_ALL)) + +#define IS_TIM_OPM_CHANNELS(__CHANNEL__) (((__CHANNEL__) == TIM_CHANNEL_1) || \ + ((__CHANNEL__) == TIM_CHANNEL_2)) + +#define IS_TIM_PERIOD(__HANDLE__, __PERIOD__) ((IS_TIM_32B_COUNTER_INSTANCE(((__HANDLE__)->Instance)) == 0U) ? \ + (((__PERIOD__) > 0U) && ((__PERIOD__) <= 0x0000FFFFU)) : \ + ((__PERIOD__) > 0U)) + +#define IS_TIM_COMPLEMENTARY_CHANNELS(__CHANNEL__) (((__CHANNEL__) == TIM_CHANNEL_1) || \ + ((__CHANNEL__) == TIM_CHANNEL_2) || \ + ((__CHANNEL__) == TIM_CHANNEL_3)) + +#define IS_TIM_CLOCKSOURCE(__CLOCK__) (((__CLOCK__) == TIM_CLOCKSOURCE_INTERNAL) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ETRMODE1) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ETRMODE2) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_TI1ED) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_TI1) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_TI2) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ITR0) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ITR1) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ITR2) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ITR3)) + +#define IS_TIM_CLOCKPOLARITY(__POLARITY__) (((__POLARITY__) == TIM_CLOCKPOLARITY_INVERTED) || \ + ((__POLARITY__) == TIM_CLOCKPOLARITY_NONINVERTED) || \ + ((__POLARITY__) == TIM_CLOCKPOLARITY_RISING) || \ + ((__POLARITY__) == TIM_CLOCKPOLARITY_FALLING) || \ + ((__POLARITY__) == TIM_CLOCKPOLARITY_BOTHEDGE)) + +#define IS_TIM_CLOCKPRESCALER(__PRESCALER__) (((__PRESCALER__) == TIM_CLOCKPRESCALER_DIV1) || \ + ((__PRESCALER__) == TIM_CLOCKPRESCALER_DIV2) || \ + ((__PRESCALER__) == TIM_CLOCKPRESCALER_DIV4) || \ + ((__PRESCALER__) == TIM_CLOCKPRESCALER_DIV8)) + +#define IS_TIM_CLOCKFILTER(__ICFILTER__) ((__ICFILTER__) <= 0xFU) + +#define IS_TIM_CLEARINPUT_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_CLEARINPUTPOLARITY_INVERTED) || \ + ((__POLARITY__) == TIM_CLEARINPUTPOLARITY_NONINVERTED)) + +#define IS_TIM_CLEARINPUT_PRESCALER(__PRESCALER__) (((__PRESCALER__) == TIM_CLEARINPUTPRESCALER_DIV1) || \ + ((__PRESCALER__) == TIM_CLEARINPUTPRESCALER_DIV2) || \ + ((__PRESCALER__) == TIM_CLEARINPUTPRESCALER_DIV4) || \ + ((__PRESCALER__) == TIM_CLEARINPUTPRESCALER_DIV8)) + +#define IS_TIM_CLEARINPUT_FILTER(__ICFILTER__) ((__ICFILTER__) <= 0xFU) + +#define IS_TIM_OSSR_STATE(__STATE__) (((__STATE__) == TIM_OSSR_ENABLE) || \ + ((__STATE__) == TIM_OSSR_DISABLE)) + +#define IS_TIM_OSSI_STATE(__STATE__) (((__STATE__) == TIM_OSSI_ENABLE) || \ + ((__STATE__) == TIM_OSSI_DISABLE)) + +#define IS_TIM_LOCK_LEVEL(__LEVEL__) (((__LEVEL__) == TIM_LOCKLEVEL_OFF) || \ + ((__LEVEL__) == TIM_LOCKLEVEL_1) || \ + ((__LEVEL__) == TIM_LOCKLEVEL_2) || \ + ((__LEVEL__) == TIM_LOCKLEVEL_3)) + +#define IS_TIM_BREAK_FILTER(__BRKFILTER__) ((__BRKFILTER__) <= 0xFUL) + +#define IS_TIM_BREAK_STATE(__STATE__) (((__STATE__) == TIM_BREAK_ENABLE) || \ + ((__STATE__) == TIM_BREAK_DISABLE)) + +#define IS_TIM_BREAK_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_BREAKPOLARITY_LOW) || \ + ((__POLARITY__) == TIM_BREAKPOLARITY_HIGH)) + +#define IS_TIM_BREAK2_STATE(__STATE__) (((__STATE__) == TIM_BREAK2_ENABLE) || \ + ((__STATE__) == TIM_BREAK2_DISABLE)) + +#define IS_TIM_BREAK2_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_BREAK2POLARITY_LOW) || \ + ((__POLARITY__) == TIM_BREAK2POLARITY_HIGH)) + +#define IS_TIM_AUTOMATIC_OUTPUT_STATE(__STATE__) (((__STATE__) == TIM_AUTOMATICOUTPUT_ENABLE) || \ + ((__STATE__) == TIM_AUTOMATICOUTPUT_DISABLE)) + +#define IS_TIM_GROUPCH5(__OCREF__) ((((__OCREF__) & 0x1FFFFFFFU) == 0x00000000U)) + +#define IS_TIM_TRGO_SOURCE(__SOURCE__) (((__SOURCE__) == TIM_TRGO_RESET) || \ + ((__SOURCE__) == TIM_TRGO_ENABLE) || \ + ((__SOURCE__) == TIM_TRGO_UPDATE) || \ + ((__SOURCE__) == TIM_TRGO_OC1) || \ + ((__SOURCE__) == TIM_TRGO_OC1REF) || \ + ((__SOURCE__) == TIM_TRGO_OC2REF) || \ + ((__SOURCE__) == TIM_TRGO_OC3REF) || \ + ((__SOURCE__) == TIM_TRGO_OC4REF)) + +#define IS_TIM_TRGO2_SOURCE(__SOURCE__) (((__SOURCE__) == TIM_TRGO2_RESET) || \ + ((__SOURCE__) == TIM_TRGO2_ENABLE) || \ + ((__SOURCE__) == TIM_TRGO2_UPDATE) || \ + ((__SOURCE__) == TIM_TRGO2_OC1) || \ + ((__SOURCE__) == TIM_TRGO2_OC1REF) || \ + ((__SOURCE__) == TIM_TRGO2_OC2REF) || \ + ((__SOURCE__) == TIM_TRGO2_OC3REF) || \ + ((__SOURCE__) == TIM_TRGO2_OC3REF) || \ + ((__SOURCE__) == TIM_TRGO2_OC4REF) || \ + ((__SOURCE__) == TIM_TRGO2_OC5REF) || \ + ((__SOURCE__) == TIM_TRGO2_OC6REF) || \ + ((__SOURCE__) == TIM_TRGO2_OC4REF_RISINGFALLING) || \ + ((__SOURCE__) == TIM_TRGO2_OC6REF_RISINGFALLING) || \ + ((__SOURCE__) == TIM_TRGO2_OC4REF_RISING_OC6REF_RISING) || \ + ((__SOURCE__) == TIM_TRGO2_OC4REF_RISING_OC6REF_FALLING) || \ + ((__SOURCE__) == TIM_TRGO2_OC5REF_RISING_OC6REF_RISING) || \ + ((__SOURCE__) == TIM_TRGO2_OC5REF_RISING_OC6REF_FALLING)) + +#define IS_TIM_MSM_STATE(__STATE__) (((__STATE__) == TIM_MASTERSLAVEMODE_ENABLE) || \ + ((__STATE__) == TIM_MASTERSLAVEMODE_DISABLE)) + +#define IS_TIM_SLAVE_MODE(__MODE__) (((__MODE__) == TIM_SLAVEMODE_DISABLE) || \ + ((__MODE__) == TIM_SLAVEMODE_RESET) || \ + ((__MODE__) == TIM_SLAVEMODE_GATED) || \ + ((__MODE__) == TIM_SLAVEMODE_TRIGGER) || \ + ((__MODE__) == TIM_SLAVEMODE_EXTERNAL1) || \ + ((__MODE__) == TIM_SLAVEMODE_COMBINED_RESETTRIGGER)) + +#define IS_TIM_PWM_MODE(__MODE__) (((__MODE__) == TIM_OCMODE_PWM1) || \ + ((__MODE__) == TIM_OCMODE_PWM2) || \ + ((__MODE__) == TIM_OCMODE_COMBINED_PWM1) || \ + ((__MODE__) == TIM_OCMODE_COMBINED_PWM2) || \ + ((__MODE__) == TIM_OCMODE_ASYMMETRIC_PWM1) || \ + ((__MODE__) == TIM_OCMODE_ASYMMETRIC_PWM2)) + +#define IS_TIM_OC_MODE(__MODE__) (((__MODE__) == TIM_OCMODE_TIMING) || \ + ((__MODE__) == TIM_OCMODE_ACTIVE) || \ + ((__MODE__) == TIM_OCMODE_INACTIVE) || \ + ((__MODE__) == TIM_OCMODE_TOGGLE) || \ + ((__MODE__) == TIM_OCMODE_FORCED_ACTIVE) || \ + ((__MODE__) == TIM_OCMODE_FORCED_INACTIVE) || \ + ((__MODE__) == TIM_OCMODE_RETRIGERRABLE_OPM1) || \ + ((__MODE__) == TIM_OCMODE_RETRIGERRABLE_OPM2)) + +#define IS_TIM_TRIGGER_SELECTION(__SELECTION__) (((__SELECTION__) == TIM_TS_ITR0) || \ + ((__SELECTION__) == TIM_TS_ITR1) || \ + ((__SELECTION__) == TIM_TS_ITR2) || \ + ((__SELECTION__) == TIM_TS_ITR3) || \ + ((__SELECTION__) == TIM_TS_TI1F_ED) || \ + ((__SELECTION__) == TIM_TS_TI1FP1) || \ + ((__SELECTION__) == TIM_TS_TI2FP2) || \ + ((__SELECTION__) == TIM_TS_ETRF)) + +#define IS_TIM_INTERNAL_TRIGGEREVENT_SELECTION(__SELECTION__) (((__SELECTION__) == TIM_TS_ITR0) || \ + ((__SELECTION__) == TIM_TS_ITR1) || \ + ((__SELECTION__) == TIM_TS_ITR2) || \ + ((__SELECTION__) == TIM_TS_ITR3) || \ + ((__SELECTION__) == TIM_TS_NONE)) + +#define IS_TIM_TRIGGERPOLARITY(__POLARITY__) (((__POLARITY__) == TIM_TRIGGERPOLARITY_INVERTED ) || \ + ((__POLARITY__) == TIM_TRIGGERPOLARITY_NONINVERTED) || \ + ((__POLARITY__) == TIM_TRIGGERPOLARITY_RISING ) || \ + ((__POLARITY__) == TIM_TRIGGERPOLARITY_FALLING ) || \ + ((__POLARITY__) == TIM_TRIGGERPOLARITY_BOTHEDGE )) + +#define IS_TIM_TRIGGERPRESCALER(__PRESCALER__) (((__PRESCALER__) == TIM_TRIGGERPRESCALER_DIV1) || \ + ((__PRESCALER__) == TIM_TRIGGERPRESCALER_DIV2) || \ + ((__PRESCALER__) == TIM_TRIGGERPRESCALER_DIV4) || \ + ((__PRESCALER__) == TIM_TRIGGERPRESCALER_DIV8)) + +#define IS_TIM_TRIGGERFILTER(__ICFILTER__) ((__ICFILTER__) <= 0xFU) + +#define IS_TIM_TI1SELECTION(__TI1SELECTION__) (((__TI1SELECTION__) == TIM_TI1SELECTION_CH1) || \ + ((__TI1SELECTION__) == TIM_TI1SELECTION_XORCOMBINATION)) + +#define IS_TIM_DMA_LENGTH(__LENGTH__) (((__LENGTH__) == TIM_DMABURSTLENGTH_1TRANSFER) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_2TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_3TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_4TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_5TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_6TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_7TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_8TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_9TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_10TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_11TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_12TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_13TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_14TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_15TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_16TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_17TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_18TRANSFERS)) + +#define IS_TIM_DMA_DATA_LENGTH(LENGTH) (((LENGTH) >= 0x1U) && ((LENGTH) < 0x10000U)) + +#define IS_TIM_IC_FILTER(__ICFILTER__) ((__ICFILTER__) <= 0xFU) + +#define IS_TIM_DEADTIME(__DEADTIME__) ((__DEADTIME__) <= 0xFFU) + +#define IS_TIM_BREAK_SYSTEM(__CONFIG__) (((__CONFIG__) == TIM_BREAK_SYSTEM_ECC) || \ + ((__CONFIG__) == TIM_BREAK_SYSTEM_PVD) || \ + ((__CONFIG__) == TIM_BREAK_SYSTEM_SRAM2_PARITY_ERROR) || \ + ((__CONFIG__) == TIM_BREAK_SYSTEM_LOCKUP)) + +#define IS_TIM_SLAVEMODE_TRIGGER_ENABLED(__TRIGGER__) (((__TRIGGER__) == TIM_SLAVEMODE_TRIGGER) || \ + ((__TRIGGER__) == TIM_SLAVEMODE_COMBINED_RESETTRIGGER)) + +#define TIM_SET_ICPRESCALERVALUE(__HANDLE__, __CHANNEL__, __ICPSC__) \ + (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 |= (__ICPSC__)) :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 |= ((__ICPSC__) << 8U)) :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 |= (__ICPSC__)) :\ + ((__HANDLE__)->Instance->CCMR2 |= ((__ICPSC__) << 8U))) + +#define TIM_RESET_ICPRESCALERVALUE(__HANDLE__, __CHANNEL__) \ + (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 &= ~TIM_CCMR1_IC1PSC) :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 &= ~TIM_CCMR1_IC2PSC) :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 &= ~TIM_CCMR2_IC3PSC) :\ + ((__HANDLE__)->Instance->CCMR2 &= ~TIM_CCMR2_IC4PSC)) + +#define TIM_SET_CAPTUREPOLARITY(__HANDLE__, __CHANNEL__, __POLARITY__) \ + (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCER |= (__POLARITY__)) :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCER |= ((__POLARITY__) << 4U)) :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCER |= ((__POLARITY__) << 8U)) :\ + ((__HANDLE__)->Instance->CCER |= (((__POLARITY__) << 12U)))) + +#define TIM_RESET_CAPTUREPOLARITY(__HANDLE__, __CHANNEL__) \ + (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCER &= ~(TIM_CCER_CC1P | TIM_CCER_CC1NP)) :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCER &= ~(TIM_CCER_CC2P | TIM_CCER_CC2NP)) :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCER &= ~(TIM_CCER_CC3P | TIM_CCER_CC3NP)) :\ + ((__HANDLE__)->Instance->CCER &= ~(TIM_CCER_CC4P | TIM_CCER_CC4NP))) + +#define TIM_CHANNEL_STATE_GET(__HANDLE__, __CHANNEL__)\ + (((__CHANNEL__) == TIM_CHANNEL_1) ? (__HANDLE__)->ChannelState[0] :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? (__HANDLE__)->ChannelState[1] :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? (__HANDLE__)->ChannelState[2] :\ + ((__CHANNEL__) == TIM_CHANNEL_4) ? (__HANDLE__)->ChannelState[3] :\ + ((__CHANNEL__) == TIM_CHANNEL_5) ? (__HANDLE__)->ChannelState[4] :\ + (__HANDLE__)->ChannelState[5]) + +#define TIM_CHANNEL_STATE_SET(__HANDLE__, __CHANNEL__, __CHANNEL_STATE__) \ + (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->ChannelState[0] = (__CHANNEL_STATE__)) :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->ChannelState[1] = (__CHANNEL_STATE__)) :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->ChannelState[2] = (__CHANNEL_STATE__)) :\ + ((__CHANNEL__) == TIM_CHANNEL_4) ? ((__HANDLE__)->ChannelState[3] = (__CHANNEL_STATE__)) :\ + ((__CHANNEL__) == TIM_CHANNEL_5) ? ((__HANDLE__)->ChannelState[4] = (__CHANNEL_STATE__)) :\ + ((__HANDLE__)->ChannelState[5] = (__CHANNEL_STATE__))) + +#define TIM_CHANNEL_STATE_SET_ALL(__HANDLE__, __CHANNEL_STATE__) do { \ + (__HANDLE__)->ChannelState[0] = \ + (__CHANNEL_STATE__); \ + (__HANDLE__)->ChannelState[1] = \ + (__CHANNEL_STATE__); \ + (__HANDLE__)->ChannelState[2] = \ + (__CHANNEL_STATE__); \ + (__HANDLE__)->ChannelState[3] = \ + (__CHANNEL_STATE__); \ + (__HANDLE__)->ChannelState[4] = \ + (__CHANNEL_STATE__); \ + (__HANDLE__)->ChannelState[5] = \ + (__CHANNEL_STATE__); \ + } while(0) + +#define TIM_CHANNEL_N_STATE_GET(__HANDLE__, __CHANNEL__)\ + (((__CHANNEL__) == TIM_CHANNEL_1) ? (__HANDLE__)->ChannelNState[0] :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? (__HANDLE__)->ChannelNState[1] :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? (__HANDLE__)->ChannelNState[2] :\ + (__HANDLE__)->ChannelNState[3]) + +#define TIM_CHANNEL_N_STATE_SET(__HANDLE__, __CHANNEL__, __CHANNEL_STATE__) \ + (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->ChannelNState[0] = (__CHANNEL_STATE__)) :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->ChannelNState[1] = (__CHANNEL_STATE__)) :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->ChannelNState[2] = (__CHANNEL_STATE__)) :\ + ((__HANDLE__)->ChannelNState[3] = (__CHANNEL_STATE__))) + +#define TIM_CHANNEL_N_STATE_SET_ALL(__HANDLE__, __CHANNEL_STATE__) do { \ + (__HANDLE__)->ChannelNState[0] = \ + (__CHANNEL_STATE__); \ + (__HANDLE__)->ChannelNState[1] = \ + (__CHANNEL_STATE__); \ + (__HANDLE__)->ChannelNState[2] = \ + (__CHANNEL_STATE__); \ + (__HANDLE__)->ChannelNState[3] = \ + (__CHANNEL_STATE__); \ + } while(0) + +/** + * @} + */ +/* End of private macros -----------------------------------------------------*/ + +/* Include TIM HAL Extended module */ +#include "stm32l4xx_hal_tim_ex.h" + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup TIM_Exported_Functions TIM Exported Functions + * @{ + */ + +/** @addtogroup TIM_Exported_Functions_Group1 TIM Time Base functions + * @brief Time Base functions + * @{ + */ +/* Time Base functions ********************************************************/ +HAL_StatusTypeDef HAL_TIM_Base_Init(TIM_HandleTypeDef *htim); +HAL_StatusTypeDef HAL_TIM_Base_DeInit(TIM_HandleTypeDef *htim); +void HAL_TIM_Base_MspInit(TIM_HandleTypeDef *htim); +void HAL_TIM_Base_MspDeInit(TIM_HandleTypeDef *htim); +/* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_TIM_Base_Start(TIM_HandleTypeDef *htim); +HAL_StatusTypeDef HAL_TIM_Base_Stop(TIM_HandleTypeDef *htim); +/* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_TIM_Base_Start_IT(TIM_HandleTypeDef *htim); +HAL_StatusTypeDef HAL_TIM_Base_Stop_IT(TIM_HandleTypeDef *htim); +/* Non-Blocking mode: DMA */ +HAL_StatusTypeDef HAL_TIM_Base_Start_DMA(TIM_HandleTypeDef *htim, const uint32_t *pData, uint16_t Length); +HAL_StatusTypeDef HAL_TIM_Base_Stop_DMA(TIM_HandleTypeDef *htim); +/** + * @} + */ + +/** @addtogroup TIM_Exported_Functions_Group2 TIM Output Compare functions + * @brief TIM Output Compare functions + * @{ + */ +/* Timer Output Compare functions *********************************************/ +HAL_StatusTypeDef HAL_TIM_OC_Init(TIM_HandleTypeDef *htim); +HAL_StatusTypeDef HAL_TIM_OC_DeInit(TIM_HandleTypeDef *htim); +void HAL_TIM_OC_MspInit(TIM_HandleTypeDef *htim); +void HAL_TIM_OC_MspDeInit(TIM_HandleTypeDef *htim); +/* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_TIM_OC_Start(TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_StatusTypeDef HAL_TIM_OC_Stop(TIM_HandleTypeDef *htim, uint32_t Channel); +/* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_TIM_OC_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_StatusTypeDef HAL_TIM_OC_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel); +/* Non-Blocking mode: DMA */ +HAL_StatusTypeDef HAL_TIM_OC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, const uint32_t *pData, + uint16_t Length); +HAL_StatusTypeDef HAL_TIM_OC_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel); +/** + * @} + */ + +/** @addtogroup TIM_Exported_Functions_Group3 TIM PWM functions + * @brief TIM PWM functions + * @{ + */ +/* Timer PWM functions ********************************************************/ +HAL_StatusTypeDef HAL_TIM_PWM_Init(TIM_HandleTypeDef *htim); +HAL_StatusTypeDef HAL_TIM_PWM_DeInit(TIM_HandleTypeDef *htim); +void HAL_TIM_PWM_MspInit(TIM_HandleTypeDef *htim); +void HAL_TIM_PWM_MspDeInit(TIM_HandleTypeDef *htim); +/* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_TIM_PWM_Start(TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_StatusTypeDef HAL_TIM_PWM_Stop(TIM_HandleTypeDef *htim, uint32_t Channel); +/* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_TIM_PWM_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_StatusTypeDef HAL_TIM_PWM_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel); +/* Non-Blocking mode: DMA */ +HAL_StatusTypeDef HAL_TIM_PWM_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, const uint32_t *pData, + uint16_t Length); +HAL_StatusTypeDef HAL_TIM_PWM_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel); +/** + * @} + */ + +/** @addtogroup TIM_Exported_Functions_Group4 TIM Input Capture functions + * @brief TIM Input Capture functions + * @{ + */ +/* Timer Input Capture functions **********************************************/ +HAL_StatusTypeDef HAL_TIM_IC_Init(TIM_HandleTypeDef *htim); +HAL_StatusTypeDef HAL_TIM_IC_DeInit(TIM_HandleTypeDef *htim); +void HAL_TIM_IC_MspInit(TIM_HandleTypeDef *htim); +void HAL_TIM_IC_MspDeInit(TIM_HandleTypeDef *htim); +/* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_TIM_IC_Start(TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_StatusTypeDef HAL_TIM_IC_Stop(TIM_HandleTypeDef *htim, uint32_t Channel); +/* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_TIM_IC_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_StatusTypeDef HAL_TIM_IC_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel); +/* Non-Blocking mode: DMA */ +HAL_StatusTypeDef HAL_TIM_IC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length); +HAL_StatusTypeDef HAL_TIM_IC_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel); +/** + * @} + */ + +/** @addtogroup TIM_Exported_Functions_Group5 TIM One Pulse functions + * @brief TIM One Pulse functions + * @{ + */ +/* Timer One Pulse functions **************************************************/ +HAL_StatusTypeDef HAL_TIM_OnePulse_Init(TIM_HandleTypeDef *htim, uint32_t OnePulseMode); +HAL_StatusTypeDef HAL_TIM_OnePulse_DeInit(TIM_HandleTypeDef *htim); +void HAL_TIM_OnePulse_MspInit(TIM_HandleTypeDef *htim); +void HAL_TIM_OnePulse_MspDeInit(TIM_HandleTypeDef *htim); +/* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_TIM_OnePulse_Start(TIM_HandleTypeDef *htim, uint32_t OutputChannel); +HAL_StatusTypeDef HAL_TIM_OnePulse_Stop(TIM_HandleTypeDef *htim, uint32_t OutputChannel); +/* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_TIM_OnePulse_Start_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel); +HAL_StatusTypeDef HAL_TIM_OnePulse_Stop_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel); +/** + * @} + */ + +/** @addtogroup TIM_Exported_Functions_Group6 TIM Encoder functions + * @brief TIM Encoder functions + * @{ + */ +/* Timer Encoder functions ****************************************************/ +HAL_StatusTypeDef HAL_TIM_Encoder_Init(TIM_HandleTypeDef *htim, const TIM_Encoder_InitTypeDef *sConfig); +HAL_StatusTypeDef HAL_TIM_Encoder_DeInit(TIM_HandleTypeDef *htim); +void HAL_TIM_Encoder_MspInit(TIM_HandleTypeDef *htim); +void HAL_TIM_Encoder_MspDeInit(TIM_HandleTypeDef *htim); +/* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_TIM_Encoder_Start(TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_StatusTypeDef HAL_TIM_Encoder_Stop(TIM_HandleTypeDef *htim, uint32_t Channel); +/* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_TIM_Encoder_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_StatusTypeDef HAL_TIM_Encoder_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel); +/* Non-Blocking mode: DMA */ +HAL_StatusTypeDef HAL_TIM_Encoder_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData1, + uint32_t *pData2, uint16_t Length); +HAL_StatusTypeDef HAL_TIM_Encoder_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel); +/** + * @} + */ + +/** @addtogroup TIM_Exported_Functions_Group7 TIM IRQ handler management + * @brief IRQ handler management + * @{ + */ +/* Interrupt Handler functions ***********************************************/ +void HAL_TIM_IRQHandler(TIM_HandleTypeDef *htim); +/** + * @} + */ + +/** @defgroup TIM_Exported_Functions_Group8 TIM Peripheral Control functions + * @brief Peripheral Control functions + * @{ + */ +/* Control functions *********************************************************/ +HAL_StatusTypeDef HAL_TIM_OC_ConfigChannel(TIM_HandleTypeDef *htim, const TIM_OC_InitTypeDef *sConfig, + uint32_t Channel); +HAL_StatusTypeDef HAL_TIM_PWM_ConfigChannel(TIM_HandleTypeDef *htim, const TIM_OC_InitTypeDef *sConfig, + uint32_t Channel); +HAL_StatusTypeDef HAL_TIM_IC_ConfigChannel(TIM_HandleTypeDef *htim, const TIM_IC_InitTypeDef *sConfig, + uint32_t Channel); +HAL_StatusTypeDef HAL_TIM_OnePulse_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OnePulse_InitTypeDef *sConfig, + uint32_t OutputChannel, uint32_t InputChannel); +HAL_StatusTypeDef HAL_TIM_ConfigOCrefClear(TIM_HandleTypeDef *htim, + const TIM_ClearInputConfigTypeDef *sClearInputConfig, + uint32_t Channel); +HAL_StatusTypeDef HAL_TIM_ConfigClockSource(TIM_HandleTypeDef *htim, const TIM_ClockConfigTypeDef *sClockSourceConfig); +HAL_StatusTypeDef HAL_TIM_ConfigTI1Input(TIM_HandleTypeDef *htim, uint32_t TI1_Selection); +HAL_StatusTypeDef HAL_TIM_SlaveConfigSynchro(TIM_HandleTypeDef *htim, const TIM_SlaveConfigTypeDef *sSlaveConfig); +HAL_StatusTypeDef HAL_TIM_SlaveConfigSynchro_IT(TIM_HandleTypeDef *htim, const TIM_SlaveConfigTypeDef *sSlaveConfig); +HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, + uint32_t BurstRequestSrc, const uint32_t *BurstBuffer, + uint32_t BurstLength); +HAL_StatusTypeDef HAL_TIM_DMABurst_MultiWriteStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, + uint32_t BurstRequestSrc, const uint32_t *BurstBuffer, + uint32_t BurstLength, uint32_t DataLength); +HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStop(TIM_HandleTypeDef *htim, uint32_t BurstRequestSrc); +HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, + uint32_t BurstRequestSrc, uint32_t *BurstBuffer, uint32_t BurstLength); +HAL_StatusTypeDef HAL_TIM_DMABurst_MultiReadStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, + uint32_t BurstRequestSrc, uint32_t *BurstBuffer, + uint32_t BurstLength, uint32_t DataLength); +HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStop(TIM_HandleTypeDef *htim, uint32_t BurstRequestSrc); +HAL_StatusTypeDef HAL_TIM_GenerateEvent(TIM_HandleTypeDef *htim, uint32_t EventSource); +uint32_t HAL_TIM_ReadCapturedValue(const TIM_HandleTypeDef *htim, uint32_t Channel); +/** + * @} + */ + +/** @defgroup TIM_Exported_Functions_Group9 TIM Callbacks functions + * @brief TIM Callbacks functions + * @{ + */ +/* Callback in non blocking modes (Interrupt and DMA) *************************/ +void HAL_TIM_PeriodElapsedCallback(TIM_HandleTypeDef *htim); +void HAL_TIM_PeriodElapsedHalfCpltCallback(TIM_HandleTypeDef *htim); +void HAL_TIM_OC_DelayElapsedCallback(TIM_HandleTypeDef *htim); +void HAL_TIM_IC_CaptureCallback(TIM_HandleTypeDef *htim); +void HAL_TIM_IC_CaptureHalfCpltCallback(TIM_HandleTypeDef *htim); +void HAL_TIM_PWM_PulseFinishedCallback(TIM_HandleTypeDef *htim); +void HAL_TIM_PWM_PulseFinishedHalfCpltCallback(TIM_HandleTypeDef *htim); +void HAL_TIM_TriggerCallback(TIM_HandleTypeDef *htim); +void HAL_TIM_TriggerHalfCpltCallback(TIM_HandleTypeDef *htim); +void HAL_TIM_ErrorCallback(TIM_HandleTypeDef *htim); + +/* Callbacks Register/UnRegister functions ***********************************/ +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) +HAL_StatusTypeDef HAL_TIM_RegisterCallback(TIM_HandleTypeDef *htim, HAL_TIM_CallbackIDTypeDef CallbackID, + pTIM_CallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_TIM_UnRegisterCallback(TIM_HandleTypeDef *htim, HAL_TIM_CallbackIDTypeDef CallbackID); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** @defgroup TIM_Exported_Functions_Group10 TIM Peripheral State functions + * @brief Peripheral State functions + * @{ + */ +/* Peripheral State functions ************************************************/ +HAL_TIM_StateTypeDef HAL_TIM_Base_GetState(const TIM_HandleTypeDef *htim); +HAL_TIM_StateTypeDef HAL_TIM_OC_GetState(const TIM_HandleTypeDef *htim); +HAL_TIM_StateTypeDef HAL_TIM_PWM_GetState(const TIM_HandleTypeDef *htim); +HAL_TIM_StateTypeDef HAL_TIM_IC_GetState(const TIM_HandleTypeDef *htim); +HAL_TIM_StateTypeDef HAL_TIM_OnePulse_GetState(const TIM_HandleTypeDef *htim); +HAL_TIM_StateTypeDef HAL_TIM_Encoder_GetState(const TIM_HandleTypeDef *htim); + +/* Peripheral Channel state functions ************************************************/ +HAL_TIM_ActiveChannel HAL_TIM_GetActiveChannel(const TIM_HandleTypeDef *htim); +HAL_TIM_ChannelStateTypeDef HAL_TIM_GetChannelState(const TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_TIM_DMABurstStateTypeDef HAL_TIM_DMABurstState(const TIM_HandleTypeDef *htim); +/** + * @} + */ + +/** + * @} + */ +/* End of exported functions -------------------------------------------------*/ + +/* Private functions----------------------------------------------------------*/ +/** @defgroup TIM_Private_Functions TIM Private Functions + * @{ + */ +void TIM_Base_SetConfig(TIM_TypeDef *TIMx, const TIM_Base_InitTypeDef *Structure); +void TIM_TI1_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, uint32_t TIM_ICFilter); +void TIM_OC2_SetConfig(TIM_TypeDef *TIMx, const TIM_OC_InitTypeDef *OC_Config); +void TIM_ETR_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ExtTRGPrescaler, + uint32_t TIM_ExtTRGPolarity, uint32_t ExtTRGFilter); + +void TIM_DMADelayPulseHalfCplt(DMA_HandleTypeDef *hdma); +void TIM_DMAError(DMA_HandleTypeDef *hdma); +void TIM_DMACaptureCplt(DMA_HandleTypeDef *hdma); +void TIM_DMACaptureHalfCplt(DMA_HandleTypeDef *hdma); +void TIM_CCxChannelCmd(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t ChannelState); + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) +void TIM_ResetCallback(TIM_HandleTypeDef *htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + +/** + * @} + */ +/* End of private functions --------------------------------------------------*/ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32L4xx_HAL_TIM_H */ diff --git a/CablePositioning_IAP_V1.0/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_tim_ex.h b/CablePositioning_IAP_V1.0/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_tim_ex.h index 6952d85..ca77ed7 100644 --- a/CablePositioning_IAP_V1.0/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_tim_ex.h +++ b/CablePositioning_IAP_V1.0/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_tim_ex.h @@ -1,439 +1,439 @@ -/** - ****************************************************************************** - * @file stm32l4xx_hal_tim_ex.h - * @author MCD Application Team - * @brief Header file of TIM HAL Extended module. - ****************************************************************************** - * @attention - * - * Copyright (c) 2017 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef STM32L4xx_HAL_TIM_EX_H -#define STM32L4xx_HAL_TIM_EX_H - -#ifdef __cplusplus -extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32l4xx_hal_def.h" - -/** @addtogroup STM32L4xx_HAL_Driver - * @{ - */ - -/** @addtogroup TIMEx - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ -/** @defgroup TIMEx_Exported_Types TIM Extended Exported Types - * @{ - */ - -/** - * @brief TIM Hall sensor Configuration Structure definition - */ - -typedef struct -{ - uint32_t IC1Polarity; /*!< Specifies the active edge of the input signal. - This parameter can be a value of @ref TIM_Input_Capture_Polarity */ - - uint32_t IC1Prescaler; /*!< Specifies the Input Capture Prescaler. - This parameter can be a value of @ref TIM_Input_Capture_Prescaler */ - - uint32_t IC1Filter; /*!< Specifies the input capture filter. - This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ - - uint32_t Commutation_Delay; /*!< Specifies the pulse value to be loaded into the Capture Compare Register. - This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */ -} TIM_HallSensor_InitTypeDef; - -/** - * @brief TIM Break/Break2 input configuration - */ -typedef struct -{ - uint32_t Source; /*!< Specifies the source of the timer break input. - This parameter can be a value of @ref TIMEx_Break_Input_Source */ - uint32_t Enable; /*!< Specifies whether or not the break input source is enabled. - This parameter can be a value of @ref TIMEx_Break_Input_Source_Enable */ - uint32_t Polarity; /*!< Specifies the break input source polarity. - This parameter can be a value of @ref TIMEx_Break_Input_Source_Polarity - Not relevant when analog watchdog output of the DFSDM1 used as break input source */ -} TIMEx_BreakInputConfigTypeDef; - -/** - * @} - */ -/* End of exported types -----------------------------------------------------*/ - -/* Exported constants --------------------------------------------------------*/ -/** @defgroup TIMEx_Exported_Constants TIM Extended Exported Constants - * @{ - */ - -/** @defgroup TIMEx_Remap TIM Extended Remapping - * @{ - */ -#define TIM_TIM1_ETR_ADC1_NONE 0x00000000U /* !< TIM1_ETR is not connected to any AWD (analog watchdog)*/ -#define TIM_TIM1_ETR_ADC1_AWD1 TIM1_OR1_ETR_ADC1_RMP_0 /* !< TIM1_ETR is connected to ADC1 AWD1 */ -#define TIM_TIM1_ETR_ADC1_AWD2 TIM1_OR1_ETR_ADC1_RMP_1 /* !< TIM1_ETR is connected to ADC1 AWD2 */ -#define TIM_TIM1_ETR_ADC1_AWD3 (TIM1_OR1_ETR_ADC1_RMP_1 | TIM1_OR1_ETR_ADC1_RMP_0) /* !< TIM1_ETR is connected to ADC1 AWD3 */ -#if defined (ADC3) -#define TIM_TIM1_ETR_ADC3_NONE 0x00000000U /* !< TIM1_ETR is not connected to any AWD (analog watchdog)*/ -#define TIM_TIM1_ETR_ADC3_AWD1 TIM1_OR1_ETR_ADC3_RMP_0 /* !< TIM1_ETR is connected to ADC3 AWD1 */ -#define TIM_TIM1_ETR_ADC3_AWD2 TIM1_OR1_ETR_ADC3_RMP_1 /* !< TIM1_ETR is connected to ADC3 AWD2 */ -#define TIM_TIM1_ETR_ADC3_AWD3 (TIM1_OR1_ETR_ADC3_RMP_1 | TIM1_OR1_ETR_ADC3_RMP_0) /* !< TIM1_ETR is connected to ADC3 AWD3 */ -#endif /* ADC3 */ -#define TIM_TIM1_TI1_GPIO 0x00000000U /* !< TIM1 TI1 is connected to GPIO */ -#define TIM_TIM1_TI1_COMP1 TIM1_OR1_TI1_RMP /* !< TIM1 TI1 is connected to COMP1 */ -#define TIM_TIM1_ETR_GPIO 0x00000000U /* !< TIM1_ETR is connected to GPIO */ -#define TIM_TIM1_ETR_COMP1 TIM1_OR2_ETRSEL_0 /* !< TIM1_ETR is connected to COMP1 output */ -#if defined(COMP2) -#define TIM_TIM1_ETR_COMP2 TIM1_OR2_ETRSEL_1 /* !< TIM1_ETR is connected to COMP2 output */ -#endif /* COMP2 */ - -#if defined (USB_OTG_FS) -#define TIM_TIM2_ITR1_TIM8_TRGO 0x00000000U /* !< TIM2_ITR1 is connected to TIM8_TRGO */ -#define TIM_TIM2_ITR1_OTG_FS_SOF TIM2_OR1_ITR1_RMP /* !< TIM2_ITR1 is connected to OTG_FS SOF */ -#else -#if defined(STM32L471xx) -#define TIM_TIM2_ITR1_TIM8_TRGO 0x00000000U /* !< TIM2_ITR1 is connected to TIM8_TRGO */ -#define TIM_TIM2_ITR1_NONE TIM2_OR1_ITR1_RMP /* !< No internal trigger on TIM2_ITR1 */ -#else -#define TIM_TIM2_ITR1_NONE 0x00000000U /* !< No internal trigger on TIM2_ITR1 */ -#define TIM_TIM2_ITR1_USB_SOF TIM2_OR1_ITR1_RMP /* !< TIM2_ITR1 is connected to USB SOF */ -#endif /* STM32L471xx */ -#endif /* USB_OTG_FS */ -#define TIM_TIM2_ETR_GPIO 0x00000000U /* !< TIM2_ETR is connected to GPIO */ -#define TIM_TIM2_ETR_LSE TIM2_OR1_ETR1_RMP /* !< TIM2_ETR is connected to LSE */ -#define TIM_TIM2_ETR_COMP1 TIM2_OR2_ETRSEL_0 /* !< TIM2_ETR is connected to COMP1 output */ -#if defined(COMP2) -#define TIM_TIM2_ETR_COMP2 TIM2_OR2_ETRSEL_1 /* !< TIM2_ETR is connected to COMP2 output */ -#endif /* COMP2 */ -#define TIM_TIM2_TI4_GPIO 0x00000000U /* !< TIM2 TI4 is connected to GPIO */ -#define TIM_TIM2_TI4_COMP1 TIM2_OR1_TI4_RMP_0 /* !< TIM2 TI4 is connected to COMP1 output */ -#if defined(COMP2) -#define TIM_TIM2_TI4_COMP2 TIM2_OR1_TI4_RMP_1 /* !< TIM2 TI4 is connected to COMP2 output */ -#define TIM_TIM2_TI4_COMP1_COMP2 (TIM2_OR1_TI4_RMP_1| TIM2_OR1_TI4_RMP_0) /* !< TIM2 TI4 is connected to logical OR between COMP1 and COMP2 output2 */ -#endif /* COMP2 */ - -#if defined (TIM3) -#define TIM_TIM3_TI1_GPIO 0x00000000U /* !< TIM3 TI1 is connected to GPIO */ -#define TIM_TIM3_TI1_COMP1 TIM3_OR1_TI1_RMP_0 /* !< TIM3 TI1 is connected to COMP1 output */ -#define TIM_TIM3_TI1_COMP2 TIM3_OR1_TI1_RMP_1 /* !< TIM3 TI1 is connected to COMP2 output */ -#define TIM_TIM3_TI1_COMP1_COMP2 (TIM3_OR1_TI1_RMP_1 | TIM3_OR1_TI1_RMP_0) /* !< TIM3 TI1 is connected to logical OR between COMP1 and COMP2 output2 */ -#define TIM_TIM3_ETR_GPIO 0x00000000U /* !< TIM3_ETR is connected to GPIO */ -#define TIM_TIM3_ETR_COMP1 TIM3_OR2_ETRSEL_0 /* !< TIM3_ETR is connected to COMP1 output */ -#endif /* TIM3 */ - -#if defined (TIM8) -#if defined(ADC2) && defined(ADC3) -#define TIM_TIM8_ETR_ADC2_NONE 0x00000000U /* !< TIM8_ETR is not connected to any AWD (analog watchdog)*/ -#define TIM_TIM8_ETR_ADC2_AWD1 TIM8_OR1_ETR_ADC2_RMP_0 /* !< TIM8_ETR is connected to ADC2 AWD1 */ -#define TIM_TIM8_ETR_ADC2_AWD2 TIM8_OR1_ETR_ADC2_RMP_1 /* !< TIM8_ETR is connected to ADC2 AWD2 */ -#define TIM_TIM8_ETR_ADC2_AWD3 (TIM8_OR1_ETR_ADC2_RMP_1 | TIM8_OR1_ETR_ADC2_RMP_0) /* !< TIM8_ETR is connected to ADC2 AWD3 */ -#define TIM_TIM8_ETR_ADC3_NONE 0x00000000U /* !< TIM8_ETR is not connected to any AWD (analog watchdog)*/ -#define TIM_TIM8_ETR_ADC3_AWD1 TIM8_OR1_ETR_ADC3_RMP_0 /* !< TIM8_ETR is connected to ADC3 AWD1 */ -#define TIM_TIM8_ETR_ADC3_AWD2 TIM8_OR1_ETR_ADC3_RMP_1 /* !< TIM8_ETR is connected to ADC3 AWD2 */ -#define TIM_TIM8_ETR_ADC3_AWD3 (TIM8_OR1_ETR_ADC3_RMP_1 | TIM8_OR1_ETR_ADC3_RMP_0) /* !< TIM8_ETR is connected to ADC3 AWD3 */ -#endif /* ADC2 && ADC3 */ - -#define TIM_TIM8_TI1_GPIO 0x00000000U /* !< TIM8 TI1 is connected to GPIO */ -#define TIM_TIM8_TI1_COMP2 TIM8_OR1_TI1_RMP /* !< TIM8 TI1 is connected to COMP1 */ -#define TIM_TIM8_ETR_GPIO 0x00000000U /* !< TIM8_ETR is connected to GPIO */ -#define TIM_TIM8_ETR_COMP1 TIM8_OR2_ETRSEL_0 /* !< TIM8_ETR is connected to COMP1 output */ -#define TIM_TIM8_ETR_COMP2 TIM8_OR2_ETRSEL_1 /* !< TIM8_ETR is connected to COMP2 output */ -#endif /* TIM8 */ - -#define TIM_TIM15_TI1_GPIO 0x00000000U /* !< TIM15 TI1 is connected to GPIO */ -#define TIM_TIM15_TI1_LSE TIM15_OR1_TI1_RMP /* !< TIM15 TI1 is connected to LSE */ -#define TIM_TIM15_ENCODERMODE_NONE 0x00000000U /* !< No redirection */ -#define TIM_TIM15_ENCODERMODE_TIM2 TIM15_OR1_ENCODER_MODE_0 /* !< TIM2 IC1 and TIM2 IC2 are connected to TIM15 IC1 and TIM15 IC2 respectively */ -#if defined (TIM3) -#define TIM_TIM15_ENCODERMODE_TIM3 TIM15_OR1_ENCODER_MODE_1 /* !< TIM3 IC1 and TIM3 IC2 are connected to TIM15 IC1 and TIM15 IC2 respectively */ -#endif /* TIM3 */ -#if defined (TIM4) -#define TIM_TIM15_ENCODERMODE_TIM4 (TIM15_OR1_ENCODER_MODE_1 | TIM15_OR1_ENCODER_MODE_0) /* !< TIM4 IC1 and TIM4 IC2 are connected to TIM15 IC1 and TIM15 IC2 respectively */ -#endif /* TIM4 */ - -#define TIM_TIM16_TI1_GPIO 0x00000000U /* !< TIM16 TI1 is connected to GPIO */ -#define TIM_TIM16_TI1_LSI TIM16_OR1_TI1_RMP_0 /* !< TIM16 TI1 is connected to LSI */ -#define TIM_TIM16_TI1_LSE TIM16_OR1_TI1_RMP_1 /* !< TIM16 TI1 is connected to LSE */ -#define TIM_TIM16_TI1_RTC (TIM16_OR1_TI1_RMP_1 | TIM16_OR1_TI1_RMP_0) /* !< TIM16 TI1 is connected to RTC wakeup interrupt */ -#if defined (TIM16_OR1_TI1_RMP_2) -#define TIM_TIM16_TI1_MSI TIM16_OR1_TI1_RMP_2 /* !< TIM16 TI1 is connected to MSI */ -#define TIM_TIM16_TI1_HSE_32 (TIM16_OR1_TI1_RMP_2 | TIM16_OR1_TI1_RMP_0) /* !< TIM16 TI1 is connected to HSE div 32 */ -#define TIM_TIM16_TI1_MCO (TIM16_OR1_TI1_RMP_2 | TIM16_OR1_TI1_RMP_1) /* !< TIM16 TI1 is connected to MCO */ -#endif /* TIM16_OR1_TI1_RMP_2 */ - -#if defined (TIM17) -#define TIM_TIM17_TI1_GPIO 0x00000000U /* !< TIM17 TI1 is connected to GPIO */ -#define TIM_TIM17_TI1_MSI TIM17_OR1_TI1_RMP_0 /* !< TIM17 TI1 is connected to MSI */ -#define TIM_TIM17_TI1_HSE_32 TIM17_OR1_TI1_RMP_1 /* !< TIM17 TI1 is connected to HSE div 32 */ -#define TIM_TIM17_TI1_MCO (TIM17_OR1_TI1_RMP_1 | TIM17_OR1_TI1_RMP_0) /* !< TIM17 TI1 is connected to MCO */ -#endif /* TIM17 */ -/** - * @} - */ - -/** @defgroup TIMEx_Break_Input TIM Extended Break input - * @{ - */ -#define TIM_BREAKINPUT_BRK 0x00000001U /*!< Timer break input */ -#define TIM_BREAKINPUT_BRK2 0x00000002U /*!< Timer break2 input */ -/** - * @} - */ - -/** @defgroup TIMEx_Break_Input_Source TIM Extended Break input source - * @{ - */ -#define TIM_BREAKINPUTSOURCE_BKIN 0x00000001U /* !< An external source (GPIO) is connected to the BKIN pin */ -#define TIM_BREAKINPUTSOURCE_COMP1 0x00000002U /* !< The COMP1 output is connected to the break input */ -#define TIM_BREAKINPUTSOURCE_COMP2 0x00000004U /* !< The COMP2 output is connected to the break input */ -#if defined (DFSDM1_Channel0) -#define TIM_BREAKINPUTSOURCE_DFSDM1 0x00000008U /* !< The analog watchdog output of the DFSDM1 peripheral is connected to the break input */ -#endif /* DFSDM1_Channel0 */ -/** - * @} - */ - -/** @defgroup TIMEx_Break_Input_Source_Enable TIM Extended Break input source enabling - * @{ - */ -#define TIM_BREAKINPUTSOURCE_DISABLE 0x00000000U /*!< Break input source is disabled */ -#define TIM_BREAKINPUTSOURCE_ENABLE 0x00000001U /*!< Break input source is enabled */ -/** - * @} - */ - -/** @defgroup TIMEx_Break_Input_Source_Polarity TIM Extended Break input polarity - * @{ - */ -#define TIM_BREAKINPUTSOURCE_POLARITY_LOW 0x00000001U /*!< Break input source is active low */ -#define TIM_BREAKINPUTSOURCE_POLARITY_HIGH 0x00000000U /*!< Break input source is active_high */ -/** - * @} - */ - -/** - * @} - */ -/* End of exported constants -------------------------------------------------*/ - -/* Exported macro ------------------------------------------------------------*/ -/** @defgroup TIMEx_Exported_Macros TIM Extended Exported Macros - * @{ - */ - -/** - * @} - */ -/* End of exported macro -----------------------------------------------------*/ - -/* Private macro -------------------------------------------------------------*/ -/** @defgroup TIMEx_Private_Macros TIM Extended Private Macros - * @{ - */ -#define IS_TIM_REMAP(__REMAP__) (((__REMAP__) <= (uint32_t)0x0001C01F)) - -#define IS_TIM_BREAKINPUT(__BREAKINPUT__) (((__BREAKINPUT__) == TIM_BREAKINPUT_BRK) || \ - ((__BREAKINPUT__) == TIM_BREAKINPUT_BRK2)) - -#if defined (DFSDM1_Channel0) -#define IS_TIM_BREAKINPUTSOURCE(__SOURCE__) (((__SOURCE__) == TIM_BREAKINPUTSOURCE_BKIN) || \ - ((__SOURCE__) == TIM_BREAKINPUTSOURCE_COMP1) || \ - ((__SOURCE__) == TIM_BREAKINPUTSOURCE_COMP2) || \ - ((__SOURCE__) == TIM_BREAKINPUTSOURCE_DFSDM1)) -#else -#define IS_TIM_BREAKINPUTSOURCE(__SOURCE__) (((__SOURCE__) == TIM_BREAKINPUTSOURCE_BKIN) || \ - ((__SOURCE__) == TIM_BREAKINPUTSOURCE_COMP1) || \ - ((__SOURCE__) == TIM_BREAKINPUTSOURCE_COMP2)) -#endif /* DFSDM1_Channel0 */ - -#define IS_TIM_BREAKINPUTSOURCE_STATE(__STATE__) (((__STATE__) == TIM_BREAKINPUTSOURCE_DISABLE) || \ - ((__STATE__) == TIM_BREAKINPUTSOURCE_ENABLE)) - -#define IS_TIM_BREAKINPUTSOURCE_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_BREAKINPUTSOURCE_POLARITY_LOW) || \ - ((__POLARITY__) == TIM_BREAKINPUTSOURCE_POLARITY_HIGH)) - -/** - * @} - */ -/* End of private macro ------------------------------------------------------*/ - -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup TIMEx_Exported_Functions TIM Extended Exported Functions - * @{ - */ - -/** @addtogroup TIMEx_Exported_Functions_Group1 Extended Timer Hall Sensor functions - * @brief Timer Hall Sensor functions - * @{ - */ -/* Timer Hall Sensor functions **********************************************/ -HAL_StatusTypeDef HAL_TIMEx_HallSensor_Init(TIM_HandleTypeDef *htim, const TIM_HallSensor_InitTypeDef *sConfig); -HAL_StatusTypeDef HAL_TIMEx_HallSensor_DeInit(TIM_HandleTypeDef *htim); - -void HAL_TIMEx_HallSensor_MspInit(TIM_HandleTypeDef *htim); -void HAL_TIMEx_HallSensor_MspDeInit(TIM_HandleTypeDef *htim); - -/* Blocking mode: Polling */ -HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start(TIM_HandleTypeDef *htim); -HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop(TIM_HandleTypeDef *htim); -/* Non-Blocking mode: Interrupt */ -HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_IT(TIM_HandleTypeDef *htim); -HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_IT(TIM_HandleTypeDef *htim); -/* Non-Blocking mode: DMA */ -HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_DMA(TIM_HandleTypeDef *htim, uint32_t *pData, uint16_t Length); -HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_DMA(TIM_HandleTypeDef *htim); -/** - * @} - */ - -/** @addtogroup TIMEx_Exported_Functions_Group2 Extended Timer Complementary Output Compare functions - * @brief Timer Complementary Output Compare functions - * @{ - */ -/* Timer Complementary Output Compare functions *****************************/ -/* Blocking mode: Polling */ -HAL_StatusTypeDef HAL_TIMEx_OCN_Start(TIM_HandleTypeDef *htim, uint32_t Channel); -HAL_StatusTypeDef HAL_TIMEx_OCN_Stop(TIM_HandleTypeDef *htim, uint32_t Channel); - -/* Non-Blocking mode: Interrupt */ -HAL_StatusTypeDef HAL_TIMEx_OCN_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel); -HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel); - -/* Non-Blocking mode: DMA */ -HAL_StatusTypeDef HAL_TIMEx_OCN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, const uint32_t *pData, - uint16_t Length); -HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel); -/** - * @} - */ - -/** @addtogroup TIMEx_Exported_Functions_Group3 Extended Timer Complementary PWM functions - * @brief Timer Complementary PWM functions - * @{ - */ -/* Timer Complementary PWM functions ****************************************/ -/* Blocking mode: Polling */ -HAL_StatusTypeDef HAL_TIMEx_PWMN_Start(TIM_HandleTypeDef *htim, uint32_t Channel); -HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop(TIM_HandleTypeDef *htim, uint32_t Channel); - -/* Non-Blocking mode: Interrupt */ -HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel); -HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel); -/* Non-Blocking mode: DMA */ -HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, const uint32_t *pData, - uint16_t Length); -HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel); -/** - * @} - */ - -/** @addtogroup TIMEx_Exported_Functions_Group4 Extended Timer Complementary One Pulse functions - * @brief Timer Complementary One Pulse functions - * @{ - */ -/* Timer Complementary One Pulse functions **********************************/ -/* Blocking mode: Polling */ -HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start(TIM_HandleTypeDef *htim, uint32_t OutputChannel); -HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop(TIM_HandleTypeDef *htim, uint32_t OutputChannel); - -/* Non-Blocking mode: Interrupt */ -HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel); -HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel); -/** - * @} - */ - -/** @addtogroup TIMEx_Exported_Functions_Group5 Extended Peripheral Control functions - * @brief Peripheral Control functions - * @{ - */ -/* Extended Control functions ************************************************/ -HAL_StatusTypeDef HAL_TIMEx_ConfigCommutEvent(TIM_HandleTypeDef *htim, uint32_t InputTrigger, - uint32_t CommutationSource); -HAL_StatusTypeDef HAL_TIMEx_ConfigCommutEvent_IT(TIM_HandleTypeDef *htim, uint32_t InputTrigger, - uint32_t CommutationSource); -HAL_StatusTypeDef HAL_TIMEx_ConfigCommutEvent_DMA(TIM_HandleTypeDef *htim, uint32_t InputTrigger, - uint32_t CommutationSource); -HAL_StatusTypeDef HAL_TIMEx_MasterConfigSynchronization(TIM_HandleTypeDef *htim, - const TIM_MasterConfigTypeDef *sMasterConfig); -HAL_StatusTypeDef HAL_TIMEx_ConfigBreakDeadTime(TIM_HandleTypeDef *htim, - const TIM_BreakDeadTimeConfigTypeDef *sBreakDeadTimeConfig); -HAL_StatusTypeDef HAL_TIMEx_ConfigBreakInput(TIM_HandleTypeDef *htim, uint32_t BreakInput, - const TIMEx_BreakInputConfigTypeDef *sBreakInputConfig); -HAL_StatusTypeDef HAL_TIMEx_GroupChannel5(TIM_HandleTypeDef *htim, uint32_t Channels); -HAL_StatusTypeDef HAL_TIMEx_RemapConfig(TIM_HandleTypeDef *htim, uint32_t Remap); -/** - * @} - */ - -/** @addtogroup TIMEx_Exported_Functions_Group6 Extended Callbacks functions - * @brief Extended Callbacks functions - * @{ - */ -/* Extended Callback **********************************************************/ -void HAL_TIMEx_CommutCallback(TIM_HandleTypeDef *htim); -void HAL_TIMEx_CommutHalfCpltCallback(TIM_HandleTypeDef *htim); -void HAL_TIMEx_BreakCallback(TIM_HandleTypeDef *htim); -void HAL_TIMEx_Break2Callback(TIM_HandleTypeDef *htim); -/** - * @} - */ - -/** @addtogroup TIMEx_Exported_Functions_Group7 Extended Peripheral State functions - * @brief Extended Peripheral State functions - * @{ - */ -/* Extended Peripheral State functions ***************************************/ -HAL_TIM_StateTypeDef HAL_TIMEx_HallSensor_GetState(const TIM_HandleTypeDef *htim); -HAL_TIM_ChannelStateTypeDef HAL_TIMEx_GetChannelNState(const TIM_HandleTypeDef *htim, uint32_t ChannelN); -/** - * @} - */ - -/** - * @} - */ -/* End of exported functions -------------------------------------------------*/ - -/* Private functions----------------------------------------------------------*/ -/** @addtogroup TIMEx_Private_Functions TIM Extended Private Functions - * @{ - */ -void TIMEx_DMACommutationCplt(DMA_HandleTypeDef *hdma); -void TIMEx_DMACommutationHalfCplt(DMA_HandleTypeDef *hdma); -/** - * @} - */ -/* End of private functions --------------------------------------------------*/ - -/** - * @} - */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - - -#endif /* STM32L4xx_HAL_TIM_EX_H */ +/** + ****************************************************************************** + * @file stm32l4xx_hal_tim_ex.h + * @author MCD Application Team + * @brief Header file of TIM HAL Extended module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32L4xx_HAL_TIM_EX_H +#define STM32L4xx_HAL_TIM_EX_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l4xx_hal_def.h" + +/** @addtogroup STM32L4xx_HAL_Driver + * @{ + */ + +/** @addtogroup TIMEx + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup TIMEx_Exported_Types TIM Extended Exported Types + * @{ + */ + +/** + * @brief TIM Hall sensor Configuration Structure definition + */ + +typedef struct +{ + uint32_t IC1Polarity; /*!< Specifies the active edge of the input signal. + This parameter can be a value of @ref TIM_Input_Capture_Polarity */ + + uint32_t IC1Prescaler; /*!< Specifies the Input Capture Prescaler. + This parameter can be a value of @ref TIM_Input_Capture_Prescaler */ + + uint32_t IC1Filter; /*!< Specifies the input capture filter. + This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ + + uint32_t Commutation_Delay; /*!< Specifies the pulse value to be loaded into the Capture Compare Register. + This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */ +} TIM_HallSensor_InitTypeDef; + +/** + * @brief TIM Break/Break2 input configuration + */ +typedef struct +{ + uint32_t Source; /*!< Specifies the source of the timer break input. + This parameter can be a value of @ref TIMEx_Break_Input_Source */ + uint32_t Enable; /*!< Specifies whether or not the break input source is enabled. + This parameter can be a value of @ref TIMEx_Break_Input_Source_Enable */ + uint32_t Polarity; /*!< Specifies the break input source polarity. + This parameter can be a value of @ref TIMEx_Break_Input_Source_Polarity + Not relevant when analog watchdog output of the DFSDM1 used as break input source */ +} TIMEx_BreakInputConfigTypeDef; + +/** + * @} + */ +/* End of exported types -----------------------------------------------------*/ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup TIMEx_Exported_Constants TIM Extended Exported Constants + * @{ + */ + +/** @defgroup TIMEx_Remap TIM Extended Remapping + * @{ + */ +#define TIM_TIM1_ETR_ADC1_NONE 0x00000000U /*!< TIM1_ETR is not connected to any AWD (analog watchdog)*/ +#define TIM_TIM1_ETR_ADC1_AWD1 TIM1_OR1_ETR_ADC1_RMP_0 /*!< TIM1_ETR is connected to ADC1 AWD1 */ +#define TIM_TIM1_ETR_ADC1_AWD2 TIM1_OR1_ETR_ADC1_RMP_1 /*!< TIM1_ETR is connected to ADC1 AWD2 */ +#define TIM_TIM1_ETR_ADC1_AWD3 (TIM1_OR1_ETR_ADC1_RMP_1 | TIM1_OR1_ETR_ADC1_RMP_0) /*!< TIM1_ETR is connected to ADC1 AWD3 */ +#if defined (ADC3) +#define TIM_TIM1_ETR_ADC3_NONE 0x00000000U /*!< TIM1_ETR is not connected to any AWD (analog watchdog)*/ +#define TIM_TIM1_ETR_ADC3_AWD1 TIM1_OR1_ETR_ADC3_RMP_0 /*!< TIM1_ETR is connected to ADC3 AWD1 */ +#define TIM_TIM1_ETR_ADC3_AWD2 TIM1_OR1_ETR_ADC3_RMP_1 /*!< TIM1_ETR is connected to ADC3 AWD2 */ +#define TIM_TIM1_ETR_ADC3_AWD3 (TIM1_OR1_ETR_ADC3_RMP_1 | TIM1_OR1_ETR_ADC3_RMP_0) /*!< TIM1_ETR is connected to ADC3 AWD3 */ +#endif /* ADC3 */ +#define TIM_TIM1_TI1_GPIO 0x00000000U /*!< TIM1 TI1 is connected to GPIO */ +#define TIM_TIM1_TI1_COMP1 TIM1_OR1_TI1_RMP /*!< TIM1 TI1 is connected to COMP1 */ +#define TIM_TIM1_ETR_GPIO 0x00000000U /*!< TIM1_ETR is connected to GPIO */ +#define TIM_TIM1_ETR_COMP1 TIM1_OR2_ETRSEL_0 /*!< TIM1_ETR is connected to COMP1 output */ +#if defined(COMP2) +#define TIM_TIM1_ETR_COMP2 TIM1_OR2_ETRSEL_1 /*!< TIM1_ETR is connected to COMP2 output */ +#endif /* COMP2 */ + +#if defined (USB_OTG_FS) +#define TIM_TIM2_ITR1_TIM8_TRGO 0x00000000U /*!< TIM2_ITR1 is connected to TIM8_TRGO */ +#define TIM_TIM2_ITR1_OTG_FS_SOF TIM2_OR1_ITR1_RMP /*!< TIM2_ITR1 is connected to OTG_FS SOF */ +#else +#if defined(STM32L471xx) +#define TIM_TIM2_ITR1_TIM8_TRGO 0x00000000U /*!< TIM2_ITR1 is connected to TIM8_TRGO */ +#define TIM_TIM2_ITR1_NONE TIM2_OR1_ITR1_RMP /*!< No internal trigger on TIM2_ITR1 */ +#else +#define TIM_TIM2_ITR1_NONE 0x00000000U /*!< No internal trigger on TIM2_ITR1 */ +#define TIM_TIM2_ITR1_USB_SOF TIM2_OR1_ITR1_RMP /*!< TIM2_ITR1 is connected to USB SOF */ +#endif /* STM32L471xx */ +#endif /* USB_OTG_FS */ +#define TIM_TIM2_ETR_GPIO 0x00000000U /*!< TIM2_ETR is connected to GPIO */ +#define TIM_TIM2_ETR_LSE TIM2_OR1_ETR1_RMP /*!< TIM2_ETR is connected to LSE */ +#define TIM_TIM2_ETR_COMP1 TIM2_OR2_ETRSEL_0 /*!< TIM2_ETR is connected to COMP1 output */ +#if defined(COMP2) +#define TIM_TIM2_ETR_COMP2 TIM2_OR2_ETRSEL_1 /*!< TIM2_ETR is connected to COMP2 output */ +#endif /* COMP2 */ +#define TIM_TIM2_TI4_GPIO 0x00000000U /*!< TIM2 TI4 is connected to GPIO */ +#define TIM_TIM2_TI4_COMP1 TIM2_OR1_TI4_RMP_0 /*!< TIM2 TI4 is connected to COMP1 output */ +#if defined(COMP2) +#define TIM_TIM2_TI4_COMP2 TIM2_OR1_TI4_RMP_1 /*!< TIM2 TI4 is connected to COMP2 output */ +#define TIM_TIM2_TI4_COMP1_COMP2 (TIM2_OR1_TI4_RMP_1| TIM2_OR1_TI4_RMP_0) /*!< TIM2 TI4 is connected to logical OR between COMP1 and COMP2 output2 */ +#endif /* COMP2 */ + +#if defined (TIM3) +#define TIM_TIM3_TI1_GPIO 0x00000000U /*!< TIM3 TI1 is connected to GPIO */ +#define TIM_TIM3_TI1_COMP1 TIM3_OR1_TI1_RMP_0 /*!< TIM3 TI1 is connected to COMP1 output */ +#define TIM_TIM3_TI1_COMP2 TIM3_OR1_TI1_RMP_1 /*!< TIM3 TI1 is connected to COMP2 output */ +#define TIM_TIM3_TI1_COMP1_COMP2 (TIM3_OR1_TI1_RMP_1 | TIM3_OR1_TI1_RMP_0) /*!< TIM3 TI1 is connected to logical OR between COMP1 and COMP2 output2 */ +#define TIM_TIM3_ETR_GPIO 0x00000000U /*!< TIM3_ETR is connected to GPIO */ +#define TIM_TIM3_ETR_COMP1 TIM3_OR2_ETRSEL_0 /*!< TIM3_ETR is connected to COMP1 output */ +#endif /* TIM3 */ + +#if defined (TIM8) +#if defined(ADC2) && defined(ADC3) +#define TIM_TIM8_ETR_ADC2_NONE 0x00000000U /*!< TIM8_ETR is not connected to any AWD (analog watchdog)*/ +#define TIM_TIM8_ETR_ADC2_AWD1 TIM8_OR1_ETR_ADC2_RMP_0 /*!< TIM8_ETR is connected to ADC2 AWD1 */ +#define TIM_TIM8_ETR_ADC2_AWD2 TIM8_OR1_ETR_ADC2_RMP_1 /*!< TIM8_ETR is connected to ADC2 AWD2 */ +#define TIM_TIM8_ETR_ADC2_AWD3 (TIM8_OR1_ETR_ADC2_RMP_1 | TIM8_OR1_ETR_ADC2_RMP_0) /*!< TIM8_ETR is connected to ADC2 AWD3 */ +#define TIM_TIM8_ETR_ADC3_NONE 0x00000000U /*!< TIM8_ETR is not connected to any AWD (analog watchdog)*/ +#define TIM_TIM8_ETR_ADC3_AWD1 TIM8_OR1_ETR_ADC3_RMP_0 /*!< TIM8_ETR is connected to ADC3 AWD1 */ +#define TIM_TIM8_ETR_ADC3_AWD2 TIM8_OR1_ETR_ADC3_RMP_1 /*!< TIM8_ETR is connected to ADC3 AWD2 */ +#define TIM_TIM8_ETR_ADC3_AWD3 (TIM8_OR1_ETR_ADC3_RMP_1 | TIM8_OR1_ETR_ADC3_RMP_0) /*!< TIM8_ETR is connected to ADC3 AWD3 */ +#endif /* ADC2 && ADC3 */ + +#define TIM_TIM8_TI1_GPIO 0x00000000U /*!< TIM8 TI1 is connected to GPIO */ +#define TIM_TIM8_TI1_COMP2 TIM8_OR1_TI1_RMP /*!< TIM8 TI1 is connected to COMP1 */ +#define TIM_TIM8_ETR_GPIO 0x00000000U /*!< TIM8_ETR is connected to GPIO */ +#define TIM_TIM8_ETR_COMP1 TIM8_OR2_ETRSEL_0 /*!< TIM8_ETR is connected to COMP1 output */ +#define TIM_TIM8_ETR_COMP2 TIM8_OR2_ETRSEL_1 /*!< TIM8_ETR is connected to COMP2 output */ +#endif /* TIM8 */ + +#define TIM_TIM15_TI1_GPIO 0x00000000U /*!< TIM15 TI1 is connected to GPIO */ +#define TIM_TIM15_TI1_LSE TIM15_OR1_TI1_RMP /*!< TIM15 TI1 is connected to LSE */ +#define TIM_TIM15_ENCODERMODE_NONE 0x00000000U /*!< No redirection */ +#define TIM_TIM15_ENCODERMODE_TIM2 TIM15_OR1_ENCODER_MODE_0 /*!< TIM2 IC1 and TIM2 IC2 are connected to TIM15 IC1 and TIM15 IC2 respectively */ +#if defined (TIM3) +#define TIM_TIM15_ENCODERMODE_TIM3 TIM15_OR1_ENCODER_MODE_1 /*!< TIM3 IC1 and TIM3 IC2 are connected to TIM15 IC1 and TIM15 IC2 respectively */ +#endif /* TIM3 */ +#if defined (TIM4) +#define TIM_TIM15_ENCODERMODE_TIM4 (TIM15_OR1_ENCODER_MODE_1 | TIM15_OR1_ENCODER_MODE_0) /*!< TIM4 IC1 and TIM4 IC2 are connected to TIM15 IC1 and TIM15 IC2 respectively */ +#endif /* TIM4 */ + +#define TIM_TIM16_TI1_GPIO 0x00000000U /*!< TIM16 TI1 is connected to GPIO */ +#define TIM_TIM16_TI1_LSI TIM16_OR1_TI1_RMP_0 /*!< TIM16 TI1 is connected to LSI */ +#define TIM_TIM16_TI1_LSE TIM16_OR1_TI1_RMP_1 /*!< TIM16 TI1 is connected to LSE */ +#define TIM_TIM16_TI1_RTC (TIM16_OR1_TI1_RMP_1 | TIM16_OR1_TI1_RMP_0) /*!< TIM16 TI1 is connected to RTC wakeup interrupt */ +#if defined (TIM16_OR1_TI1_RMP_2) +#define TIM_TIM16_TI1_MSI TIM16_OR1_TI1_RMP_2 /*!< TIM16 TI1 is connected to MSI */ +#define TIM_TIM16_TI1_HSE_32 (TIM16_OR1_TI1_RMP_2 | TIM16_OR1_TI1_RMP_0) /*!< TIM16 TI1 is connected to HSE div 32 */ +#define TIM_TIM16_TI1_MCO (TIM16_OR1_TI1_RMP_2 | TIM16_OR1_TI1_RMP_1) /*!< TIM16 TI1 is connected to MCO */ +#endif /* TIM16_OR1_TI1_RMP_2 */ + +#if defined (TIM17) +#define TIM_TIM17_TI1_GPIO 0x00000000U /*!< TIM17 TI1 is connected to GPIO */ +#define TIM_TIM17_TI1_MSI TIM17_OR1_TI1_RMP_0 /*!< TIM17 TI1 is connected to MSI */ +#define TIM_TIM17_TI1_HSE_32 TIM17_OR1_TI1_RMP_1 /*!< TIM17 TI1 is connected to HSE div 32 */ +#define TIM_TIM17_TI1_MCO (TIM17_OR1_TI1_RMP_1 | TIM17_OR1_TI1_RMP_0) /*!< TIM17 TI1 is connected to MCO */ +#endif /* TIM17 */ +/** + * @} + */ + +/** @defgroup TIMEx_Break_Input TIM Extended Break input + * @{ + */ +#define TIM_BREAKINPUT_BRK 0x00000001U /*!< Timer break input */ +#define TIM_BREAKINPUT_BRK2 0x00000002U /*!< Timer break2 input */ +/** + * @} + */ + +/** @defgroup TIMEx_Break_Input_Source TIM Extended Break input source + * @{ + */ +#define TIM_BREAKINPUTSOURCE_BKIN 0x00000001U /*!< An external source (GPIO) is connected to the BKIN pin */ +#define TIM_BREAKINPUTSOURCE_COMP1 0x00000002U /*!< The COMP1 output is connected to the break input */ +#define TIM_BREAKINPUTSOURCE_COMP2 0x00000004U /*!< The COMP2 output is connected to the break input */ +#if defined (DFSDM1_Channel0) +#define TIM_BREAKINPUTSOURCE_DFSDM1 0x00000008U /*!< The analog watchdog output of the DFSDM1 peripheral is connected to the break input */ +#endif /* DFSDM1_Channel0 */ +/** + * @} + */ + +/** @defgroup TIMEx_Break_Input_Source_Enable TIM Extended Break input source enabling + * @{ + */ +#define TIM_BREAKINPUTSOURCE_DISABLE 0x00000000U /*!< Break input source is disabled */ +#define TIM_BREAKINPUTSOURCE_ENABLE 0x00000001U /*!< Break input source is enabled */ +/** + * @} + */ + +/** @defgroup TIMEx_Break_Input_Source_Polarity TIM Extended Break input polarity + * @{ + */ +#define TIM_BREAKINPUTSOURCE_POLARITY_LOW 0x00000001U /*!< Break input source is active low */ +#define TIM_BREAKINPUTSOURCE_POLARITY_HIGH 0x00000000U /*!< Break input source is active_high */ +/** + * @} + */ + +/** + * @} + */ +/* End of exported constants -------------------------------------------------*/ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup TIMEx_Exported_Macros TIM Extended Exported Macros + * @{ + */ + +/** + * @} + */ +/* End of exported macro -----------------------------------------------------*/ + +/* Private macro -------------------------------------------------------------*/ +/** @defgroup TIMEx_Private_Macros TIM Extended Private Macros + * @{ + */ +#define IS_TIM_REMAP(__REMAP__) (((__REMAP__) <= (uint32_t)0x0001C01F)) + +#define IS_TIM_BREAKINPUT(__BREAKINPUT__) (((__BREAKINPUT__) == TIM_BREAKINPUT_BRK) || \ + ((__BREAKINPUT__) == TIM_BREAKINPUT_BRK2)) + +#if defined (DFSDM1_Channel0) +#define IS_TIM_BREAKINPUTSOURCE(__SOURCE__) (((__SOURCE__) == TIM_BREAKINPUTSOURCE_BKIN) || \ + ((__SOURCE__) == TIM_BREAKINPUTSOURCE_COMP1) || \ + ((__SOURCE__) == TIM_BREAKINPUTSOURCE_COMP2) || \ + ((__SOURCE__) == TIM_BREAKINPUTSOURCE_DFSDM1)) +#else +#define IS_TIM_BREAKINPUTSOURCE(__SOURCE__) (((__SOURCE__) == TIM_BREAKINPUTSOURCE_BKIN) || \ + ((__SOURCE__) == TIM_BREAKINPUTSOURCE_COMP1) || \ + ((__SOURCE__) == TIM_BREAKINPUTSOURCE_COMP2)) +#endif /* DFSDM1_Channel0 */ + +#define IS_TIM_BREAKINPUTSOURCE_STATE(__STATE__) (((__STATE__) == TIM_BREAKINPUTSOURCE_DISABLE) || \ + ((__STATE__) == TIM_BREAKINPUTSOURCE_ENABLE)) + +#define IS_TIM_BREAKINPUTSOURCE_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_BREAKINPUTSOURCE_POLARITY_LOW) || \ + ((__POLARITY__) == TIM_BREAKINPUTSOURCE_POLARITY_HIGH)) + +/** + * @} + */ +/* End of private macro ------------------------------------------------------*/ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup TIMEx_Exported_Functions TIM Extended Exported Functions + * @{ + */ + +/** @addtogroup TIMEx_Exported_Functions_Group1 Extended Timer Hall Sensor functions + * @brief Timer Hall Sensor functions + * @{ + */ +/* Timer Hall Sensor functions **********************************************/ +HAL_StatusTypeDef HAL_TIMEx_HallSensor_Init(TIM_HandleTypeDef *htim, const TIM_HallSensor_InitTypeDef *sConfig); +HAL_StatusTypeDef HAL_TIMEx_HallSensor_DeInit(TIM_HandleTypeDef *htim); + +void HAL_TIMEx_HallSensor_MspInit(TIM_HandleTypeDef *htim); +void HAL_TIMEx_HallSensor_MspDeInit(TIM_HandleTypeDef *htim); + +/* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start(TIM_HandleTypeDef *htim); +HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop(TIM_HandleTypeDef *htim); +/* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_IT(TIM_HandleTypeDef *htim); +HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_IT(TIM_HandleTypeDef *htim); +/* Non-Blocking mode: DMA */ +HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_DMA(TIM_HandleTypeDef *htim, uint32_t *pData, uint16_t Length); +HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_DMA(TIM_HandleTypeDef *htim); +/** + * @} + */ + +/** @addtogroup TIMEx_Exported_Functions_Group2 Extended Timer Complementary Output Compare functions + * @brief Timer Complementary Output Compare functions + * @{ + */ +/* Timer Complementary Output Compare functions *****************************/ +/* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_TIMEx_OCN_Start(TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_StatusTypeDef HAL_TIMEx_OCN_Stop(TIM_HandleTypeDef *htim, uint32_t Channel); + +/* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_TIMEx_OCN_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel); + +/* Non-Blocking mode: DMA */ +HAL_StatusTypeDef HAL_TIMEx_OCN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, const uint32_t *pData, + uint16_t Length); +HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel); +/** + * @} + */ + +/** @addtogroup TIMEx_Exported_Functions_Group3 Extended Timer Complementary PWM functions + * @brief Timer Complementary PWM functions + * @{ + */ +/* Timer Complementary PWM functions ****************************************/ +/* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_TIMEx_PWMN_Start(TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop(TIM_HandleTypeDef *htim, uint32_t Channel); + +/* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel); +/* Non-Blocking mode: DMA */ +HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, const uint32_t *pData, + uint16_t Length); +HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel); +/** + * @} + */ + +/** @addtogroup TIMEx_Exported_Functions_Group4 Extended Timer Complementary One Pulse functions + * @brief Timer Complementary One Pulse functions + * @{ + */ +/* Timer Complementary One Pulse functions **********************************/ +/* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start(TIM_HandleTypeDef *htim, uint32_t OutputChannel); +HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop(TIM_HandleTypeDef *htim, uint32_t OutputChannel); + +/* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel); +HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel); +/** + * @} + */ + +/** @addtogroup TIMEx_Exported_Functions_Group5 Extended Peripheral Control functions + * @brief Peripheral Control functions + * @{ + */ +/* Extended Control functions ************************************************/ +HAL_StatusTypeDef HAL_TIMEx_ConfigCommutEvent(TIM_HandleTypeDef *htim, uint32_t InputTrigger, + uint32_t CommutationSource); +HAL_StatusTypeDef HAL_TIMEx_ConfigCommutEvent_IT(TIM_HandleTypeDef *htim, uint32_t InputTrigger, + uint32_t CommutationSource); +HAL_StatusTypeDef HAL_TIMEx_ConfigCommutEvent_DMA(TIM_HandleTypeDef *htim, uint32_t InputTrigger, + uint32_t CommutationSource); +HAL_StatusTypeDef HAL_TIMEx_MasterConfigSynchronization(TIM_HandleTypeDef *htim, + const TIM_MasterConfigTypeDef *sMasterConfig); +HAL_StatusTypeDef HAL_TIMEx_ConfigBreakDeadTime(TIM_HandleTypeDef *htim, + const TIM_BreakDeadTimeConfigTypeDef *sBreakDeadTimeConfig); +HAL_StatusTypeDef HAL_TIMEx_ConfigBreakInput(TIM_HandleTypeDef *htim, uint32_t BreakInput, + const TIMEx_BreakInputConfigTypeDef *sBreakInputConfig); +HAL_StatusTypeDef HAL_TIMEx_GroupChannel5(TIM_HandleTypeDef *htim, uint32_t Channels); +HAL_StatusTypeDef HAL_TIMEx_RemapConfig(TIM_HandleTypeDef *htim, uint32_t Remap); +/** + * @} + */ + +/** @addtogroup TIMEx_Exported_Functions_Group6 Extended Callbacks functions + * @brief Extended Callbacks functions + * @{ + */ +/* Extended Callback **********************************************************/ +void HAL_TIMEx_CommutCallback(TIM_HandleTypeDef *htim); +void HAL_TIMEx_CommutHalfCpltCallback(TIM_HandleTypeDef *htim); +void HAL_TIMEx_BreakCallback(TIM_HandleTypeDef *htim); +void HAL_TIMEx_Break2Callback(TIM_HandleTypeDef *htim); +/** + * @} + */ + +/** @addtogroup TIMEx_Exported_Functions_Group7 Extended Peripheral State functions + * @brief Extended Peripheral State functions + * @{ + */ +/* Extended Peripheral State functions ***************************************/ +HAL_TIM_StateTypeDef HAL_TIMEx_HallSensor_GetState(const TIM_HandleTypeDef *htim); +HAL_TIM_ChannelStateTypeDef HAL_TIMEx_GetChannelNState(const TIM_HandleTypeDef *htim, uint32_t ChannelN); +/** + * @} + */ + +/** + * @} + */ +/* End of exported functions -------------------------------------------------*/ + +/* Private functions----------------------------------------------------------*/ +/** @addtogroup TIMEx_Private_Functions TIM Extended Private Functions + * @{ + */ +void TIMEx_DMACommutationCplt(DMA_HandleTypeDef *hdma); +void TIMEx_DMACommutationHalfCplt(DMA_HandleTypeDef *hdma); +/** + * @} + */ +/* End of private functions --------------------------------------------------*/ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + + +#endif /* STM32L4xx_HAL_TIM_EX_H */ diff --git a/CablePositioning_IAP_V1.0/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_uart.h b/CablePositioning_IAP_V1.0/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_uart.h index 73bdece..f3e60f3 100644 --- a/CablePositioning_IAP_V1.0/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_uart.h +++ b/CablePositioning_IAP_V1.0/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_uart.h @@ -1,1788 +1,1810 @@ -/** - ****************************************************************************** - * @file stm32l4xx_hal_uart.h - * @author MCD Application Team - * @brief Header file of UART HAL module. - ****************************************************************************** - * @attention - * - * Copyright (c) 2017 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef STM32L4xx_HAL_UART_H -#define STM32L4xx_HAL_UART_H - -#ifdef __cplusplus -extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32l4xx_hal_def.h" - -/** @addtogroup STM32L4xx_HAL_Driver - * @{ - */ - -/** @addtogroup UART - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ -/** @defgroup UART_Exported_Types UART Exported Types - * @{ - */ - -/** - * @brief UART Init Structure definition - */ -typedef struct -{ - uint32_t BaudRate; /*!< This member configures the UART communication baud rate. - The baud rate register is computed using the following formula: - LPUART: - ======= - Baud Rate Register = ((256 * lpuart_ker_ckpres) / ((huart->Init.BaudRate))) - where lpuart_ker_ck_pres is the UART input clock - (divided by a prescaler if applicable) - UART: - ===== - - If oversampling is 16 or in LIN mode, - Baud Rate Register = ((uart_ker_ckpres) / ((huart->Init.BaudRate))) - - If oversampling is 8, - Baud Rate Register[15:4] = ((2 * uart_ker_ckpres) / - ((huart->Init.BaudRate)))[15:4] - Baud Rate Register[3] = 0 - Baud Rate Register[2:0] = (((2 * uart_ker_ckpres) / - ((huart->Init.BaudRate)))[3:0]) >> 1 - where uart_ker_ck_pres is the UART input clock - (divided by a prescaler if applicable) */ - - uint32_t WordLength; /*!< Specifies the number of data bits transmitted or received in a frame. - This parameter can be a value of @ref UARTEx_Word_Length. */ - - uint32_t StopBits; /*!< Specifies the number of stop bits transmitted. - This parameter can be a value of @ref UART_Stop_Bits. */ - - uint32_t Parity; /*!< Specifies the parity mode. - This parameter can be a value of @ref UART_Parity - @note When parity is enabled, the computed parity is inserted - at the MSB position of the transmitted data (9th bit when - the word length is set to 9 data bits; 8th bit when the - word length is set to 8 data bits). */ - - uint32_t Mode; /*!< Specifies whether the Receive or Transmit mode is enabled or disabled. - This parameter can be a value of @ref UART_Mode. */ - - uint32_t HwFlowCtl; /*!< Specifies whether the hardware flow control mode is enabled - or disabled. - This parameter can be a value of @ref UART_Hardware_Flow_Control. */ - - uint32_t OverSampling; /*!< Specifies whether the Over sampling 8 is enabled or disabled, - to achieve higher speed (up to f_PCLK/8). - This parameter can be a value of @ref UART_Over_Sampling. */ - - uint32_t OneBitSampling; /*!< Specifies whether a single sample or three samples' majority vote is selected. - Selecting the single sample method increases the receiver tolerance to clock - deviations. This parameter can be a value of @ref UART_OneBit_Sampling. */ - -#if defined(USART_PRESC_PRESCALER) - uint32_t ClockPrescaler; /*!< Specifies the prescaler value used to divide the UART clock source. - This parameter can be a value of @ref UART_ClockPrescaler. */ -#endif /* USART_PRESC_PRESCALER */ - -} UART_InitTypeDef; - -/** - * @brief UART Advanced Features initialization structure definition - */ -typedef struct -{ - uint32_t AdvFeatureInit; /*!< Specifies which advanced UART features is initialized. Several - Advanced Features may be initialized at the same time . - This parameter can be a value of - @ref UART_Advanced_Features_Initialization_Type. */ - - uint32_t TxPinLevelInvert; /*!< Specifies whether the TX pin active level is inverted. - This parameter can be a value of @ref UART_Tx_Inv. */ - - uint32_t RxPinLevelInvert; /*!< Specifies whether the RX pin active level is inverted. - This parameter can be a value of @ref UART_Rx_Inv. */ - - uint32_t DataInvert; /*!< Specifies whether data are inverted (positive/direct logic - vs negative/inverted logic). - This parameter can be a value of @ref UART_Data_Inv. */ - - uint32_t Swap; /*!< Specifies whether TX and RX pins are swapped. - This parameter can be a value of @ref UART_Rx_Tx_Swap. */ - - uint32_t OverrunDisable; /*!< Specifies whether the reception overrun detection is disabled. - This parameter can be a value of @ref UART_Overrun_Disable. */ - - uint32_t DMADisableonRxError; /*!< Specifies whether the DMA is disabled in case of reception error. - This parameter can be a value of @ref UART_DMA_Disable_on_Rx_Error. */ - - uint32_t AutoBaudRateEnable; /*!< Specifies whether auto Baud rate detection is enabled. - This parameter can be a value of @ref UART_AutoBaudRate_Enable. */ - - uint32_t AutoBaudRateMode; /*!< If auto Baud rate detection is enabled, specifies how the rate - detection is carried out. - This parameter can be a value of @ref UART_AutoBaud_Rate_Mode. */ - - uint32_t MSBFirst; /*!< Specifies whether MSB is sent first on UART line. - This parameter can be a value of @ref UART_MSB_First. */ -} UART_AdvFeatureInitTypeDef; - -/** - * @brief HAL UART State definition - * @note HAL UART State value is a combination of 2 different substates: - * gState and RxState (see @ref UART_State_Definition). - * - gState contains UART state information related to global Handle management - * and also information related to Tx operations. - * gState value coding follow below described bitmap : - * b7-b6 Error information - * 00 : No Error - * 01 : (Not Used) - * 10 : Timeout - * 11 : Error - * b5 Peripheral initialization status - * 0 : Reset (Peripheral not initialized) - * 1 : Init done (Peripheral initialized. HAL UART Init function already called) - * b4-b3 (not used) - * xx : Should be set to 00 - * b2 Intrinsic process state - * 0 : Ready - * 1 : Busy (Peripheral busy with some configuration or internal operations) - * b1 (not used) - * x : Should be set to 0 - * b0 Tx state - * 0 : Ready (no Tx operation ongoing) - * 1 : Busy (Tx operation ongoing) - * - RxState contains information related to Rx operations. - * RxState value coding follow below described bitmap : - * b7-b6 (not used) - * xx : Should be set to 00 - * b5 Peripheral initialization status - * 0 : Reset (Peripheral not initialized) - * 1 : Init done (Peripheral initialized) - * b4-b2 (not used) - * xxx : Should be set to 000 - * b1 Rx state - * 0 : Ready (no Rx operation ongoing) - * 1 : Busy (Rx operation ongoing) - * b0 (not used) - * x : Should be set to 0. - */ -typedef uint32_t HAL_UART_StateTypeDef; - -/** - * @brief UART clock sources definition - */ -typedef enum -{ - UART_CLOCKSOURCE_PCLK1 = 0x00U, /*!< PCLK1 clock source */ - UART_CLOCKSOURCE_PCLK2 = 0x01U, /*!< PCLK2 clock source */ - UART_CLOCKSOURCE_HSI = 0x02U, /*!< HSI clock source */ - UART_CLOCKSOURCE_SYSCLK = 0x04U, /*!< SYSCLK clock source */ - UART_CLOCKSOURCE_LSE = 0x08U, /*!< LSE clock source */ - UART_CLOCKSOURCE_UNDEFINED = 0x10U /*!< Undefined clock source */ -} UART_ClockSourceTypeDef; - -/** - * @brief HAL UART Reception type definition - * @note HAL UART Reception type value aims to identify which type of Reception is ongoing. - * It is expected to admit following values : - * HAL_UART_RECEPTION_STANDARD = 0x00U, - * HAL_UART_RECEPTION_TOIDLE = 0x01U, - * HAL_UART_RECEPTION_TORTO = 0x02U, - * HAL_UART_RECEPTION_TOCHARMATCH = 0x03U, - */ -typedef uint32_t HAL_UART_RxTypeTypeDef; - -/** - * @brief UART handle Structure definition - */ -typedef struct __UART_HandleTypeDef -{ - USART_TypeDef *Instance; /*!< UART registers base address */ - - UART_InitTypeDef Init; /*!< UART communication parameters */ - - UART_AdvFeatureInitTypeDef AdvancedInit; /*!< UART Advanced Features initialization parameters */ - - const uint8_t *pTxBuffPtr; /*!< Pointer to UART Tx transfer Buffer */ - - uint16_t TxXferSize; /*!< UART Tx Transfer size */ - - __IO uint16_t TxXferCount; /*!< UART Tx Transfer Counter */ - - uint8_t *pRxBuffPtr; /*!< Pointer to UART Rx transfer Buffer */ - - uint16_t RxXferSize; /*!< UART Rx Transfer size */ - - __IO uint16_t RxXferCount; /*!< UART Rx Transfer Counter */ - - uint16_t Mask; /*!< UART Rx RDR register mask */ - -#if defined(USART_CR1_FIFOEN) - uint32_t FifoMode; /*!< Specifies if the FIFO mode is being used. - This parameter can be a value of @ref UARTEx_FIFO_mode. */ - - uint16_t NbRxDataToProcess; /*!< Number of data to process during RX ISR execution */ - - uint16_t NbTxDataToProcess; /*!< Number of data to process during TX ISR execution */ - -#endif /*USART_CR1_FIFOEN */ - __IO HAL_UART_RxTypeTypeDef ReceptionType; /*!< Type of ongoing reception */ - - void (*RxISR)(struct __UART_HandleTypeDef *huart); /*!< Function pointer on Rx IRQ handler */ - - void (*TxISR)(struct __UART_HandleTypeDef *huart); /*!< Function pointer on Tx IRQ handler */ - - DMA_HandleTypeDef *hdmatx; /*!< UART Tx DMA Handle parameters */ - - DMA_HandleTypeDef *hdmarx; /*!< UART Rx DMA Handle parameters */ - - HAL_LockTypeDef Lock; /*!< Locking object */ - - __IO HAL_UART_StateTypeDef gState; /*!< UART state information related to global Handle management - and also related to Tx operations. This parameter - can be a value of @ref HAL_UART_StateTypeDef */ - - __IO HAL_UART_StateTypeDef RxState; /*!< UART state information related to Rx operations. This - parameter can be a value of @ref HAL_UART_StateTypeDef */ - - __IO uint32_t ErrorCode; /*!< UART Error code */ - -#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) - void (* TxHalfCpltCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Tx Half Complete Callback */ - void (* TxCpltCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Tx Complete Callback */ - void (* RxHalfCpltCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Rx Half Complete Callback */ - void (* RxCpltCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Rx Complete Callback */ - void (* ErrorCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Error Callback */ - void (* AbortCpltCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Abort Complete Callback */ - void (* AbortTransmitCpltCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Abort Transmit Complete Callback */ - void (* AbortReceiveCpltCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Abort Receive Complete Callback */ - void (* WakeupCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Wakeup Callback */ -#if defined(USART_CR1_FIFOEN) - void (* RxFifoFullCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Rx Fifo Full Callback */ - void (* TxFifoEmptyCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Tx Fifo Empty Callback */ -#endif /* USART_CR1_FIFOEN */ - void (* RxEventCallback)(struct __UART_HandleTypeDef *huart, uint16_t Pos); /*!< UART Reception Event Callback */ - - void (* MspInitCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Msp Init callback */ - void (* MspDeInitCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Msp DeInit callback */ -#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ - -} UART_HandleTypeDef; - -#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) -/** - * @brief HAL UART Callback ID enumeration definition - */ -typedef enum -{ - HAL_UART_TX_HALFCOMPLETE_CB_ID = 0x00U, /*!< UART Tx Half Complete Callback ID */ - HAL_UART_TX_COMPLETE_CB_ID = 0x01U, /*!< UART Tx Complete Callback ID */ - HAL_UART_RX_HALFCOMPLETE_CB_ID = 0x02U, /*!< UART Rx Half Complete Callback ID */ - HAL_UART_RX_COMPLETE_CB_ID = 0x03U, /*!< UART Rx Complete Callback ID */ - HAL_UART_ERROR_CB_ID = 0x04U, /*!< UART Error Callback ID */ - HAL_UART_ABORT_COMPLETE_CB_ID = 0x05U, /*!< UART Abort Complete Callback ID */ - HAL_UART_ABORT_TRANSMIT_COMPLETE_CB_ID = 0x06U, /*!< UART Abort Transmit Complete Callback ID */ - HAL_UART_ABORT_RECEIVE_COMPLETE_CB_ID = 0x07U, /*!< UART Abort Receive Complete Callback ID */ - HAL_UART_WAKEUP_CB_ID = 0x08U, /*!< UART Wakeup Callback ID */ -#if defined(USART_CR1_FIFOEN) - HAL_UART_RX_FIFO_FULL_CB_ID = 0x09U, /*!< UART Rx Fifo Full Callback ID */ - HAL_UART_TX_FIFO_EMPTY_CB_ID = 0x0AU, /*!< UART Tx Fifo Empty Callback ID */ -#endif /* USART_CR1_FIFOEN */ - - HAL_UART_MSPINIT_CB_ID = 0x0BU, /*!< UART MspInit callback ID */ - HAL_UART_MSPDEINIT_CB_ID = 0x0CU /*!< UART MspDeInit callback ID */ - -} HAL_UART_CallbackIDTypeDef; - -/** - * @brief HAL UART Callback pointer definition - */ -typedef void (*pUART_CallbackTypeDef)(UART_HandleTypeDef *huart); /*!< pointer to an UART callback function */ -typedef void (*pUART_RxEventCallbackTypeDef) -(struct __UART_HandleTypeDef *huart, uint16_t Pos); /*!< pointer to a UART Rx Event specific callback function */ - -#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ - -/** - * @} - */ - -/* Exported constants --------------------------------------------------------*/ -/** @defgroup UART_Exported_Constants UART Exported Constants - * @{ - */ - -/** @defgroup UART_State_Definition UART State Code Definition - * @{ - */ -#define HAL_UART_STATE_RESET 0x00000000U /*!< Peripheral is not initialized - Value is allowed for gState and RxState */ -#define HAL_UART_STATE_READY 0x00000020U /*!< Peripheral Initialized and ready for use - Value is allowed for gState and RxState */ -#define HAL_UART_STATE_BUSY 0x00000024U /*!< an internal process is ongoing - Value is allowed for gState only */ -#define HAL_UART_STATE_BUSY_TX 0x00000021U /*!< Data Transmission process is ongoing - Value is allowed for gState only */ -#define HAL_UART_STATE_BUSY_RX 0x00000022U /*!< Data Reception process is ongoing - Value is allowed for RxState only */ -#define HAL_UART_STATE_BUSY_TX_RX 0x00000023U /*!< Data Transmission and Reception process is ongoing - Not to be used for neither gState nor RxState.Value is result - of combination (Or) between gState and RxState values */ -#define HAL_UART_STATE_TIMEOUT 0x000000A0U /*!< Timeout state - Value is allowed for gState only */ -#define HAL_UART_STATE_ERROR 0x000000E0U /*!< Error - Value is allowed for gState only */ -/** - * @} - */ - -/** @defgroup UART_Error_Definition UART Error Definition - * @{ - */ -#define HAL_UART_ERROR_NONE (0x00000000U) /*!< No error */ -#define HAL_UART_ERROR_PE (0x00000001U) /*!< Parity error */ -#define HAL_UART_ERROR_NE (0x00000002U) /*!< Noise error */ -#define HAL_UART_ERROR_FE (0x00000004U) /*!< Frame error */ -#define HAL_UART_ERROR_ORE (0x00000008U) /*!< Overrun error */ -#define HAL_UART_ERROR_DMA (0x00000010U) /*!< DMA transfer error */ -#define HAL_UART_ERROR_RTO (0x00000020U) /*!< Receiver Timeout error */ - -#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) -#define HAL_UART_ERROR_INVALID_CALLBACK (0x00000040U) /*!< Invalid Callback error */ -#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ -/** - * @} - */ - -/** @defgroup UART_Stop_Bits UART Number of Stop Bits - * @{ - */ -#define UART_STOPBITS_0_5 USART_CR2_STOP_0 /*!< UART frame with 0.5 stop bit */ -#define UART_STOPBITS_1 0x00000000U /*!< UART frame with 1 stop bit */ -#define UART_STOPBITS_1_5 (USART_CR2_STOP_0 | USART_CR2_STOP_1) /*!< UART frame with 1.5 stop bits */ -#define UART_STOPBITS_2 USART_CR2_STOP_1 /*!< UART frame with 2 stop bits */ -/** - * @} - */ - -/** @defgroup UART_Parity UART Parity - * @{ - */ -#define UART_PARITY_NONE 0x00000000U /*!< No parity */ -#define UART_PARITY_EVEN USART_CR1_PCE /*!< Even parity */ -#define UART_PARITY_ODD (USART_CR1_PCE | USART_CR1_PS) /*!< Odd parity */ -/** - * @} - */ - -/** @defgroup UART_Hardware_Flow_Control UART Hardware Flow Control - * @{ - */ -#define UART_HWCONTROL_NONE 0x00000000U /*!< No hardware control */ -#define UART_HWCONTROL_RTS USART_CR3_RTSE /*!< Request To Send */ -#define UART_HWCONTROL_CTS USART_CR3_CTSE /*!< Clear To Send */ -#define UART_HWCONTROL_RTS_CTS (USART_CR3_RTSE | USART_CR3_CTSE) /*!< Request and Clear To Send */ -/** - * @} - */ - -/** @defgroup UART_Mode UART Transfer Mode - * @{ - */ -#define UART_MODE_RX USART_CR1_RE /*!< RX mode */ -#define UART_MODE_TX USART_CR1_TE /*!< TX mode */ -#define UART_MODE_TX_RX (USART_CR1_TE |USART_CR1_RE) /*!< RX and TX mode */ -/** - * @} - */ - -/** @defgroup UART_State UART State - * @{ - */ -#define UART_STATE_DISABLE 0x00000000U /*!< UART disabled */ -#define UART_STATE_ENABLE USART_CR1_UE /*!< UART enabled */ -/** - * @} - */ - -/** @defgroup UART_Over_Sampling UART Over Sampling - * @{ - */ -#define UART_OVERSAMPLING_16 0x00000000U /*!< Oversampling by 16 */ -#define UART_OVERSAMPLING_8 USART_CR1_OVER8 /*!< Oversampling by 8 */ -/** - * @} - */ - -/** @defgroup UART_OneBit_Sampling UART One Bit Sampling Method - * @{ - */ -#define UART_ONE_BIT_SAMPLE_DISABLE 0x00000000U /*!< One-bit sampling disable */ -#define UART_ONE_BIT_SAMPLE_ENABLE USART_CR3_ONEBIT /*!< One-bit sampling enable */ -/** - * @} - */ - -#if defined(USART_PRESC_PRESCALER) -/** @defgroup UART_ClockPrescaler UART Clock Prescaler - * @{ - */ -#define UART_PRESCALER_DIV1 0x00000000U /*!< fclk_pres = fclk */ -#define UART_PRESCALER_DIV2 0x00000001U /*!< fclk_pres = fclk/2 */ -#define UART_PRESCALER_DIV4 0x00000002U /*!< fclk_pres = fclk/4 */ -#define UART_PRESCALER_DIV6 0x00000003U /*!< fclk_pres = fclk/6 */ -#define UART_PRESCALER_DIV8 0x00000004U /*!< fclk_pres = fclk/8 */ -#define UART_PRESCALER_DIV10 0x00000005U /*!< fclk_pres = fclk/10 */ -#define UART_PRESCALER_DIV12 0x00000006U /*!< fclk_pres = fclk/12 */ -#define UART_PRESCALER_DIV16 0x00000007U /*!< fclk_pres = fclk/16 */ -#define UART_PRESCALER_DIV32 0x00000008U /*!< fclk_pres = fclk/32 */ -#define UART_PRESCALER_DIV64 0x00000009U /*!< fclk_pres = fclk/64 */ -#define UART_PRESCALER_DIV128 0x0000000AU /*!< fclk_pres = fclk/128 */ -#define UART_PRESCALER_DIV256 0x0000000BU /*!< fclk_pres = fclk/256 */ -/** - * @} - */ - -#endif /* USART_PRESC_PRESCALER */ -/** @defgroup UART_AutoBaud_Rate_Mode UART Advanced Feature AutoBaud Rate Mode - * @{ - */ -#define UART_ADVFEATURE_AUTOBAUDRATE_ONSTARTBIT 0x00000000U /*!< Auto Baud rate detection - on start bit */ -#define UART_ADVFEATURE_AUTOBAUDRATE_ONFALLINGEDGE USART_CR2_ABRMODE_0 /*!< Auto Baud rate detection - on falling edge */ -#define UART_ADVFEATURE_AUTOBAUDRATE_ON0X7FFRAME USART_CR2_ABRMODE_1 /*!< Auto Baud rate detection - on 0x7F frame detection */ -#define UART_ADVFEATURE_AUTOBAUDRATE_ON0X55FRAME USART_CR2_ABRMODE /*!< Auto Baud rate detection - on 0x55 frame detection */ -/** - * @} - */ - -/** @defgroup UART_Receiver_Timeout UART Receiver Timeout - * @{ - */ -#define UART_RECEIVER_TIMEOUT_DISABLE 0x00000000U /*!< UART Receiver Timeout disable */ -#define UART_RECEIVER_TIMEOUT_ENABLE USART_CR2_RTOEN /*!< UART Receiver Timeout enable */ -/** - * @} - */ - -/** @defgroup UART_LIN UART Local Interconnection Network mode - * @{ - */ -#define UART_LIN_DISABLE 0x00000000U /*!< Local Interconnect Network disable */ -#define UART_LIN_ENABLE USART_CR2_LINEN /*!< Local Interconnect Network enable */ -/** - * @} - */ - -/** @defgroup UART_LIN_Break_Detection UART LIN Break Detection - * @{ - */ -#define UART_LINBREAKDETECTLENGTH_10B 0x00000000U /*!< LIN 10-bit break detection length */ -#define UART_LINBREAKDETECTLENGTH_11B USART_CR2_LBDL /*!< LIN 11-bit break detection length */ -/** - * @} - */ - -/** @defgroup UART_DMA_Tx UART DMA Tx - * @{ - */ -#define UART_DMA_TX_DISABLE 0x00000000U /*!< UART DMA TX disabled */ -#define UART_DMA_TX_ENABLE USART_CR3_DMAT /*!< UART DMA TX enabled */ -/** - * @} - */ - -/** @defgroup UART_DMA_Rx UART DMA Rx - * @{ - */ -#define UART_DMA_RX_DISABLE 0x00000000U /*!< UART DMA RX disabled */ -#define UART_DMA_RX_ENABLE USART_CR3_DMAR /*!< UART DMA RX enabled */ -/** - * @} - */ - -/** @defgroup UART_Half_Duplex_Selection UART Half Duplex Selection - * @{ - */ -#define UART_HALF_DUPLEX_DISABLE 0x00000000U /*!< UART half-duplex disabled */ -#define UART_HALF_DUPLEX_ENABLE USART_CR3_HDSEL /*!< UART half-duplex enabled */ -/** - * @} - */ - -/** @defgroup UART_WakeUp_Methods UART WakeUp Methods - * @{ - */ -#define UART_WAKEUPMETHOD_IDLELINE 0x00000000U /*!< UART wake-up on idle line */ -#define UART_WAKEUPMETHOD_ADDRESSMARK USART_CR1_WAKE /*!< UART wake-up on address mark */ -/** - * @} - */ - -/** @defgroup UART_Request_Parameters UART Request Parameters - * @{ - */ -#define UART_AUTOBAUD_REQUEST USART_RQR_ABRRQ /*!< Auto-Baud Rate Request */ -#define UART_SENDBREAK_REQUEST USART_RQR_SBKRQ /*!< Send Break Request */ -#define UART_MUTE_MODE_REQUEST USART_RQR_MMRQ /*!< Mute Mode Request */ -#define UART_RXDATA_FLUSH_REQUEST USART_RQR_RXFRQ /*!< Receive Data flush Request */ -#define UART_TXDATA_FLUSH_REQUEST USART_RQR_TXFRQ /*!< Transmit data flush Request */ -/** - * @} - */ - -/** @defgroup UART_Advanced_Features_Initialization_Type UART Advanced Feature Initialization Type - * @{ - */ -#define UART_ADVFEATURE_NO_INIT 0x00000000U /*!< No advanced feature initialization */ -#define UART_ADVFEATURE_TXINVERT_INIT 0x00000001U /*!< TX pin active level inversion */ -#define UART_ADVFEATURE_RXINVERT_INIT 0x00000002U /*!< RX pin active level inversion */ -#define UART_ADVFEATURE_DATAINVERT_INIT 0x00000004U /*!< Binary data inversion */ -#define UART_ADVFEATURE_SWAP_INIT 0x00000008U /*!< TX/RX pins swap */ -#define UART_ADVFEATURE_RXOVERRUNDISABLE_INIT 0x00000010U /*!< RX overrun disable */ -#define UART_ADVFEATURE_DMADISABLEONERROR_INIT 0x00000020U /*!< DMA disable on Reception Error */ -#define UART_ADVFEATURE_AUTOBAUDRATE_INIT 0x00000040U /*!< Auto Baud rate detection initialization */ -#define UART_ADVFEATURE_MSBFIRST_INIT 0x00000080U /*!< Most significant bit sent/received first */ -/** - * @} - */ - -/** @defgroup UART_Tx_Inv UART Advanced Feature TX Pin Active Level Inversion - * @{ - */ -#define UART_ADVFEATURE_TXINV_DISABLE 0x00000000U /*!< TX pin active level inversion disable */ -#define UART_ADVFEATURE_TXINV_ENABLE USART_CR2_TXINV /*!< TX pin active level inversion enable */ -/** - * @} - */ - -/** @defgroup UART_Rx_Inv UART Advanced Feature RX Pin Active Level Inversion - * @{ - */ -#define UART_ADVFEATURE_RXINV_DISABLE 0x00000000U /*!< RX pin active level inversion disable */ -#define UART_ADVFEATURE_RXINV_ENABLE USART_CR2_RXINV /*!< RX pin active level inversion enable */ -/** - * @} - */ - -/** @defgroup UART_Data_Inv UART Advanced Feature Binary Data Inversion - * @{ - */ -#define UART_ADVFEATURE_DATAINV_DISABLE 0x00000000U /*!< Binary data inversion disable */ -#define UART_ADVFEATURE_DATAINV_ENABLE USART_CR2_DATAINV /*!< Binary data inversion enable */ -/** - * @} - */ - -/** @defgroup UART_Rx_Tx_Swap UART Advanced Feature RX TX Pins Swap - * @{ - */ -#define UART_ADVFEATURE_SWAP_DISABLE 0x00000000U /*!< TX/RX pins swap disable */ -#define UART_ADVFEATURE_SWAP_ENABLE USART_CR2_SWAP /*!< TX/RX pins swap enable */ -/** - * @} - */ - -/** @defgroup UART_Overrun_Disable UART Advanced Feature Overrun Disable - * @{ - */ -#define UART_ADVFEATURE_OVERRUN_ENABLE 0x00000000U /*!< RX overrun enable */ -#define UART_ADVFEATURE_OVERRUN_DISABLE USART_CR3_OVRDIS /*!< RX overrun disable */ -/** - * @} - */ - -/** @defgroup UART_AutoBaudRate_Enable UART Advanced Feature Auto BaudRate Enable - * @{ - */ -#define UART_ADVFEATURE_AUTOBAUDRATE_DISABLE 0x00000000U /*!< RX Auto Baud rate detection enable */ -#define UART_ADVFEATURE_AUTOBAUDRATE_ENABLE USART_CR2_ABREN /*!< RX Auto Baud rate detection disable */ -/** - * @} - */ - -/** @defgroup UART_DMA_Disable_on_Rx_Error UART Advanced Feature DMA Disable On Rx Error - * @{ - */ -#define UART_ADVFEATURE_DMA_ENABLEONRXERROR 0x00000000U /*!< DMA enable on Reception Error */ -#define UART_ADVFEATURE_DMA_DISABLEONRXERROR USART_CR3_DDRE /*!< DMA disable on Reception Error */ -/** - * @} - */ - -/** @defgroup UART_MSB_First UART Advanced Feature MSB First - * @{ - */ -#define UART_ADVFEATURE_MSBFIRST_DISABLE 0x00000000U /*!< Most significant bit sent/received - first disable */ -#define UART_ADVFEATURE_MSBFIRST_ENABLE USART_CR2_MSBFIRST /*!< Most significant bit sent/received - first enable */ -/** - * @} - */ - -/** @defgroup UART_Stop_Mode_Enable UART Advanced Feature Stop Mode Enable - * @{ - */ -#define UART_ADVFEATURE_STOPMODE_DISABLE 0x00000000U /*!< UART stop mode disable */ -#define UART_ADVFEATURE_STOPMODE_ENABLE USART_CR1_UESM /*!< UART stop mode enable */ -/** - * @} - */ - -/** @defgroup UART_Mute_Mode UART Advanced Feature Mute Mode Enable - * @{ - */ -#define UART_ADVFEATURE_MUTEMODE_DISABLE 0x00000000U /*!< UART mute mode disable */ -#define UART_ADVFEATURE_MUTEMODE_ENABLE USART_CR1_MME /*!< UART mute mode enable */ -/** - * @} - */ - -/** @defgroup UART_CR2_ADDRESS_LSB_POS UART Address-matching LSB Position In CR2 Register - * @{ - */ -#define UART_CR2_ADDRESS_LSB_POS 24U /*!< UART address-matching LSB position in CR2 register */ -/** - * @} - */ - -/** @defgroup UART_WakeUp_from_Stop_Selection UART WakeUp From Stop Selection - * @{ - */ -#define UART_WAKEUP_ON_ADDRESS 0x00000000U /*!< UART wake-up on address */ -#define UART_WAKEUP_ON_STARTBIT USART_CR3_WUS_1 /*!< UART wake-up on start bit */ -#define UART_WAKEUP_ON_READDATA_NONEMPTY USART_CR3_WUS /*!< UART wake-up on receive data register - not empty or RXFIFO is not empty */ -/** - * @} - */ - -/** @defgroup UART_DriverEnable_Polarity UART DriverEnable Polarity - * @{ - */ -#define UART_DE_POLARITY_HIGH 0x00000000U /*!< Driver enable signal is active high */ -#define UART_DE_POLARITY_LOW USART_CR3_DEP /*!< Driver enable signal is active low */ -/** - * @} - */ - -/** @defgroup UART_CR1_DEAT_ADDRESS_LSB_POS UART Driver Enable Assertion Time LSB Position In CR1 Register - * @{ - */ -#define UART_CR1_DEAT_ADDRESS_LSB_POS 21U /*!< UART Driver Enable assertion time LSB - position in CR1 register */ -/** - * @} - */ - -/** @defgroup UART_CR1_DEDT_ADDRESS_LSB_POS UART Driver Enable DeAssertion Time LSB Position In CR1 Register - * @{ - */ -#define UART_CR1_DEDT_ADDRESS_LSB_POS 16U /*!< UART Driver Enable de-assertion time LSB - position in CR1 register */ -/** - * @} - */ - -/** @defgroup UART_Interruption_Mask UART Interruptions Flag Mask - * @{ - */ -#define UART_IT_MASK 0x001FU /*!< UART interruptions flags mask */ -/** - * @} - */ - -/** @defgroup UART_TimeOut_Value UART polling-based communications time-out value - * @{ - */ -#define HAL_UART_TIMEOUT_VALUE 0x1FFFFFFU /*!< UART polling-based communications time-out value */ -/** - * @} - */ - -/** @defgroup UART_Flags UART Status Flags - * Elements values convention: 0xXXXX - * - 0xXXXX : Flag mask in the ISR register - * @{ - */ -#if defined(USART_CR1_FIFOEN) -#define UART_FLAG_TXFT USART_ISR_TXFT /*!< UART TXFIFO threshold flag */ -#define UART_FLAG_RXFT USART_ISR_RXFT /*!< UART RXFIFO threshold flag */ -#define UART_FLAG_RXFF USART_ISR_RXFF /*!< UART RXFIFO Full flag */ -#define UART_FLAG_TXFE USART_ISR_TXFE /*!< UART TXFIFO Empty flag */ -#endif /* USART_CR1_FIFOEN */ -#define UART_FLAG_REACK USART_ISR_REACK /*!< UART receive enable acknowledge flag */ -#define UART_FLAG_TEACK USART_ISR_TEACK /*!< UART transmit enable acknowledge flag */ -#define UART_FLAG_WUF USART_ISR_WUF /*!< UART wake-up from stop mode flag */ -#define UART_FLAG_RWU USART_ISR_RWU /*!< UART receiver wake-up from mute mode flag */ -#define UART_FLAG_SBKF USART_ISR_SBKF /*!< UART send break flag */ -#define UART_FLAG_CMF USART_ISR_CMF /*!< UART character match flag */ -#define UART_FLAG_BUSY USART_ISR_BUSY /*!< UART busy flag */ -#define UART_FLAG_ABRF USART_ISR_ABRF /*!< UART auto Baud rate flag */ -#define UART_FLAG_ABRE USART_ISR_ABRE /*!< UART auto Baud rate error */ -#define UART_FLAG_RTOF USART_ISR_RTOF /*!< UART receiver timeout flag */ -#define UART_FLAG_CTS USART_ISR_CTS /*!< UART clear to send flag */ -#define UART_FLAG_CTSIF USART_ISR_CTSIF /*!< UART clear to send interrupt flag */ -#define UART_FLAG_LBDF USART_ISR_LBDF /*!< UART LIN break detection flag */ -#if defined(USART_CR1_FIFOEN) -#define UART_FLAG_TXE USART_ISR_TXE_TXFNF /*!< UART transmit data register empty */ -#define UART_FLAG_TXFNF USART_ISR_TXE_TXFNF /*!< UART TXFIFO not full */ -#else -#define UART_FLAG_TXE USART_ISR_TXE /*!< UART transmit data register empty */ -#endif /* USART_CR1_FIFOEN */ -#define UART_FLAG_TC USART_ISR_TC /*!< UART transmission complete */ -#if defined(USART_CR1_FIFOEN) -#define UART_FLAG_RXNE USART_ISR_RXNE_RXFNE /*!< UART read data register not empty */ -#define UART_FLAG_RXFNE USART_ISR_RXNE_RXFNE /*!< UART RXFIFO not empty */ -#else -#define UART_FLAG_RXNE USART_ISR_RXNE /*!< UART read data register not empty */ -#endif /* USART_CR1_FIFOEN */ -#define UART_FLAG_IDLE USART_ISR_IDLE /*!< UART idle flag */ -#define UART_FLAG_ORE USART_ISR_ORE /*!< UART overrun error */ -#define UART_FLAG_NE USART_ISR_NE /*!< UART noise error */ -#define UART_FLAG_FE USART_ISR_FE /*!< UART frame error */ -#define UART_FLAG_PE USART_ISR_PE /*!< UART parity error */ -/** - * @} - */ - -/** @defgroup UART_Interrupt_definition UART Interrupts Definition - * Elements values convention: 000ZZZZZ0XXYYYYYb - * - YYYYY : Interrupt source position in the XX register (5bits) - * - XX : Interrupt source register (2bits) - * - 01: CR1 register - * - 10: CR2 register - * - 11: CR3 register - * - ZZZZZ : Flag position in the ISR register(5bits) - * Elements values convention: 000000000XXYYYYYb - * - YYYYY : Interrupt source position in the XX register (5bits) - * - XX : Interrupt source register (2bits) - * - 01: CR1 register - * - 10: CR2 register - * - 11: CR3 register - * Elements values convention: 0000ZZZZ00000000b - * - ZZZZ : Flag position in the ISR register(4bits) - * @{ - */ -#define UART_IT_PE 0x0028U /*!< UART parity error interruption */ -#define UART_IT_TXE 0x0727U /*!< UART transmit data register empty interruption */ -#if defined(USART_CR1_FIFOEN) -#define UART_IT_TXFNF 0x0727U /*!< UART TX FIFO not full interruption */ -#endif /* USART_CR1_FIFOEN */ -#define UART_IT_TC 0x0626U /*!< UART transmission complete interruption */ -#define UART_IT_RXNE 0x0525U /*!< UART read data register not empty interruption */ -#if defined(USART_CR1_FIFOEN) -#define UART_IT_RXFNE 0x0525U /*!< UART RXFIFO not empty interruption */ -#endif /* USART_CR1_FIFOEN */ -#define UART_IT_IDLE 0x0424U /*!< UART idle interruption */ -#define UART_IT_LBD 0x0846U /*!< UART LIN break detection interruption */ -#define UART_IT_CTS 0x096AU /*!< UART CTS interruption */ -#define UART_IT_CM 0x112EU /*!< UART character match interruption */ -#define UART_IT_WUF 0x1476U /*!< UART wake-up from stop mode interruption */ -#if defined(USART_CR1_FIFOEN) -#define UART_IT_RXFF 0x183FU /*!< UART RXFIFO full interruption */ -#define UART_IT_TXFE 0x173EU /*!< UART TXFIFO empty interruption */ -#define UART_IT_RXFT 0x1A7CU /*!< UART RXFIFO threshold reached interruption */ -#define UART_IT_TXFT 0x1B77U /*!< UART TXFIFO threshold reached interruption */ -#endif /* USART_CR1_FIFOEN */ -#define UART_IT_RTO 0x0B3AU /*!< UART receiver timeout interruption */ - -#define UART_IT_ERR 0x0060U /*!< UART error interruption */ - -#define UART_IT_ORE 0x0300U /*!< UART overrun error interruption */ -#define UART_IT_NE 0x0200U /*!< UART noise error interruption */ -#define UART_IT_FE 0x0100U /*!< UART frame error interruption */ -/** - * @} - */ - -/** @defgroup UART_IT_CLEAR_Flags UART Interruption Clear Flags - * @{ - */ -#define UART_CLEAR_PEF USART_ICR_PECF /*!< Parity Error Clear Flag */ -#define UART_CLEAR_FEF USART_ICR_FECF /*!< Framing Error Clear Flag */ -#define UART_CLEAR_NEF USART_ICR_NECF /*!< Noise Error detected Clear Flag */ -#define UART_CLEAR_OREF USART_ICR_ORECF /*!< Overrun Error Clear Flag */ -#define UART_CLEAR_IDLEF USART_ICR_IDLECF /*!< IDLE line detected Clear Flag */ -#if defined(USART_CR1_FIFOEN) -#define UART_CLEAR_TXFECF USART_ICR_TXFECF /*!< TXFIFO empty clear flag */ -#endif /* USART_CR1_FIFOEN */ -#define UART_CLEAR_TCF USART_ICR_TCCF /*!< Transmission Complete Clear Flag */ -#define UART_CLEAR_LBDF USART_ICR_LBDCF /*!< LIN Break Detection Clear Flag */ -#define UART_CLEAR_CTSF USART_ICR_CTSCF /*!< CTS Interrupt Clear Flag */ -#define UART_CLEAR_CMF USART_ICR_CMCF /*!< Character Match Clear Flag */ -#define UART_CLEAR_WUF USART_ICR_WUCF /*!< Wake Up from stop mode Clear Flag */ -#define UART_CLEAR_RTOF USART_ICR_RTOCF /*!< UART receiver timeout clear flag */ -/** - * @} - */ - -/** @defgroup UART_RECEPTION_TYPE_Values UART Reception type values - * @{ - */ -#define HAL_UART_RECEPTION_STANDARD (0x00000000U) /*!< Standard reception */ -#define HAL_UART_RECEPTION_TOIDLE (0x00000001U) /*!< Reception till completion or IDLE event */ -#define HAL_UART_RECEPTION_TORTO (0x00000002U) /*!< Reception till completion or RTO event */ -#define HAL_UART_RECEPTION_TOCHARMATCH (0x00000003U) /*!< Reception till completion or CM event */ -/** - * @} - */ - -/** - * @} - */ - -/* Exported macros -----------------------------------------------------------*/ -/** @defgroup UART_Exported_Macros UART Exported Macros - * @{ - */ - -/** @brief Reset UART handle states. - * @param __HANDLE__ UART handle. - * @retval None - */ -#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) -#define __HAL_UART_RESET_HANDLE_STATE(__HANDLE__) do{ \ - (__HANDLE__)->gState = HAL_UART_STATE_RESET; \ - (__HANDLE__)->RxState = HAL_UART_STATE_RESET; \ - (__HANDLE__)->MspInitCallback = NULL; \ - (__HANDLE__)->MspDeInitCallback = NULL; \ - } while(0U) -#else -#define __HAL_UART_RESET_HANDLE_STATE(__HANDLE__) do{ \ - (__HANDLE__)->gState = HAL_UART_STATE_RESET; \ - (__HANDLE__)->RxState = HAL_UART_STATE_RESET; \ - } while(0U) -#endif /*USE_HAL_UART_REGISTER_CALLBACKS */ - -/** @brief Flush the UART Data registers. - * @param __HANDLE__ specifies the UART Handle. - * @retval None - */ -#define __HAL_UART_FLUSH_DRREGISTER(__HANDLE__) \ - do{ \ - SET_BIT((__HANDLE__)->Instance->RQR, UART_RXDATA_FLUSH_REQUEST); \ - SET_BIT((__HANDLE__)->Instance->RQR, UART_TXDATA_FLUSH_REQUEST); \ - } while(0U) - -/** @brief Clear the specified UART pending flag. - * @param __HANDLE__ specifies the UART Handle. - * @param __FLAG__ specifies the flag to check. - * This parameter can be any combination of the following values: - * @arg @ref UART_CLEAR_PEF Parity Error Clear Flag - * @arg @ref UART_CLEAR_FEF Framing Error Clear Flag - * @arg @ref UART_CLEAR_NEF Noise detected Clear Flag - * @arg @ref UART_CLEAR_OREF Overrun Error Clear Flag - * @arg @ref UART_CLEAR_IDLEF IDLE line detected Clear Flag - * @arg @ref UART_CLEAR_TXFECF TXFIFO empty clear Flag - * @arg @ref UART_CLEAR_TCF Transmission Complete Clear Flag - * @arg @ref UART_CLEAR_RTOF Receiver Timeout clear flag - * @arg @ref UART_CLEAR_LBDF LIN Break Detection Clear Flag - * @arg @ref UART_CLEAR_CTSF CTS Interrupt Clear Flag - * @arg @ref UART_CLEAR_CMF Character Match Clear Flag - * @arg @ref UART_CLEAR_WUF Wake Up from stop mode Clear Flag - * @retval None - */ -#define __HAL_UART_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ICR = (__FLAG__)) - -/** @brief Clear the UART PE pending flag. - * @param __HANDLE__ specifies the UART Handle. - * @retval None - */ -#define __HAL_UART_CLEAR_PEFLAG(__HANDLE__) __HAL_UART_CLEAR_FLAG((__HANDLE__), UART_CLEAR_PEF) - -/** @brief Clear the UART FE pending flag. - * @param __HANDLE__ specifies the UART Handle. - * @retval None - */ -#define __HAL_UART_CLEAR_FEFLAG(__HANDLE__) __HAL_UART_CLEAR_FLAG((__HANDLE__), UART_CLEAR_FEF) - -/** @brief Clear the UART NE pending flag. - * @param __HANDLE__ specifies the UART Handle. - * @retval None - */ -#define __HAL_UART_CLEAR_NEFLAG(__HANDLE__) __HAL_UART_CLEAR_FLAG((__HANDLE__), UART_CLEAR_NEF) - -/** @brief Clear the UART ORE pending flag. - * @param __HANDLE__ specifies the UART Handle. - * @retval None - */ -#define __HAL_UART_CLEAR_OREFLAG(__HANDLE__) __HAL_UART_CLEAR_FLAG((__HANDLE__), UART_CLEAR_OREF) - -/** @brief Clear the UART IDLE pending flag. - * @param __HANDLE__ specifies the UART Handle. - * @retval None - */ -#define __HAL_UART_CLEAR_IDLEFLAG(__HANDLE__) __HAL_UART_CLEAR_FLAG((__HANDLE__), UART_CLEAR_IDLEF) - -#if defined(USART_CR1_FIFOEN) -/** @brief Clear the UART TX FIFO empty clear flag. - * @param __HANDLE__ specifies the UART Handle. - * @retval None - */ -#define __HAL_UART_CLEAR_TXFECF(__HANDLE__) __HAL_UART_CLEAR_FLAG((__HANDLE__), UART_CLEAR_TXFECF) -#endif /* USART_CR1_FIFOEN */ - -/** @brief Check whether the specified UART flag is set or not. - * @param __HANDLE__ specifies the UART Handle. - * @param __FLAG__ specifies the flag to check. - * This parameter can be one of the following values: - * @arg @ref UART_FLAG_TXFT TXFIFO threshold flag - * @arg @ref UART_FLAG_RXFT RXFIFO threshold flag - * @arg @ref UART_FLAG_RXFF RXFIFO Full flag - * @arg @ref UART_FLAG_TXFE TXFIFO Empty flag - * @arg @ref UART_FLAG_REACK Receive enable acknowledge flag - * @arg @ref UART_FLAG_TEACK Transmit enable acknowledge flag - * @arg @ref UART_FLAG_WUF Wake up from stop mode flag - * @arg @ref UART_FLAG_RWU Receiver wake up flag (if the UART in mute mode) - * @arg @ref UART_FLAG_SBKF Send Break flag - * @arg @ref UART_FLAG_CMF Character match flag - * @arg @ref UART_FLAG_BUSY Busy flag - * @arg @ref UART_FLAG_ABRF Auto Baud rate detection flag - * @arg @ref UART_FLAG_ABRE Auto Baud rate detection error flag - * @arg @ref UART_FLAG_CTS CTS Change flag - * @arg @ref UART_FLAG_LBDF LIN Break detection flag - * @arg @ref UART_FLAG_TXE Transmit data register empty flag - * @arg @ref UART_FLAG_TXFNF UART TXFIFO not full flag - * @arg @ref UART_FLAG_TC Transmission Complete flag - * @arg @ref UART_FLAG_RXNE Receive data register not empty flag - * @arg @ref UART_FLAG_RXFNE UART RXFIFO not empty flag - * @arg @ref UART_FLAG_RTOF Receiver Timeout flag - * @arg @ref UART_FLAG_IDLE Idle Line detection flag - * @arg @ref UART_FLAG_ORE Overrun Error flag - * @arg @ref UART_FLAG_NE Noise Error flag - * @arg @ref UART_FLAG_FE Framing Error flag - * @arg @ref UART_FLAG_PE Parity Error flag - * @retval The new state of __FLAG__ (TRUE or FALSE). - */ -#define __HAL_UART_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->ISR & (__FLAG__)) == (__FLAG__)) - -/** @brief Enable the specified UART interrupt. - * @param __HANDLE__ specifies the UART Handle. - * @param __INTERRUPT__ specifies the UART interrupt source to enable. - * This parameter can be one of the following values: - * @arg @ref UART_IT_RXFF RXFIFO Full interrupt - * @arg @ref UART_IT_TXFE TXFIFO Empty interrupt - * @arg @ref UART_IT_RXFT RXFIFO threshold interrupt - * @arg @ref UART_IT_TXFT TXFIFO threshold interrupt - * @arg @ref UART_IT_WUF Wakeup from stop mode interrupt - * @arg @ref UART_IT_CM Character match interrupt - * @arg @ref UART_IT_CTS CTS change interrupt - * @arg @ref UART_IT_LBD LIN Break detection interrupt - * @arg @ref UART_IT_TXE Transmit Data Register empty interrupt - * @arg @ref UART_IT_TXFNF TX FIFO not full interrupt - * @arg @ref UART_IT_TC Transmission complete interrupt - * @arg @ref UART_IT_RXNE Receive Data register not empty interrupt - * @arg @ref UART_IT_RXFNE RXFIFO not empty interrupt - * @arg @ref UART_IT_RTO Receive Timeout interrupt - * @arg @ref UART_IT_IDLE Idle line detection interrupt - * @arg @ref UART_IT_PE Parity Error interrupt - * @arg @ref UART_IT_ERR Error interrupt (frame error, noise error, overrun error) - * @retval None - */ -#define __HAL_UART_ENABLE_IT(__HANDLE__, __INTERRUPT__) (\ - ((((uint8_t)(__INTERRUPT__)) >> 5U) == 1U)?\ - ((__HANDLE__)->Instance->CR1 |= (1U <<\ - ((__INTERRUPT__) & UART_IT_MASK))): \ - ((((uint8_t)(__INTERRUPT__)) >> 5U) == 2U)?\ - ((__HANDLE__)->Instance->CR2 |= (1U <<\ - ((__INTERRUPT__) & UART_IT_MASK))): \ - ((__HANDLE__)->Instance->CR3 |= (1U <<\ - ((__INTERRUPT__) & UART_IT_MASK)))) - -/** @brief Disable the specified UART interrupt. - * @param __HANDLE__ specifies the UART Handle. - * @param __INTERRUPT__ specifies the UART interrupt source to disable. - * This parameter can be one of the following values: - * @arg @ref UART_IT_RXFF RXFIFO Full interrupt - * @arg @ref UART_IT_TXFE TXFIFO Empty interrupt - * @arg @ref UART_IT_RXFT RXFIFO threshold interrupt - * @arg @ref UART_IT_TXFT TXFIFO threshold interrupt - * @arg @ref UART_IT_WUF Wakeup from stop mode interrupt - * @arg @ref UART_IT_CM Character match interrupt - * @arg @ref UART_IT_CTS CTS change interrupt - * @arg @ref UART_IT_LBD LIN Break detection interrupt - * @arg @ref UART_IT_TXE Transmit Data Register empty interrupt - * @arg @ref UART_IT_TXFNF TX FIFO not full interrupt - * @arg @ref UART_IT_TC Transmission complete interrupt - * @arg @ref UART_IT_RXNE Receive Data register not empty interrupt - * @arg @ref UART_IT_RXFNE RXFIFO not empty interrupt - * @arg @ref UART_IT_RTO Receive Timeout interrupt - * @arg @ref UART_IT_IDLE Idle line detection interrupt - * @arg @ref UART_IT_PE Parity Error interrupt - * @arg @ref UART_IT_ERR Error interrupt (Frame error, noise error, overrun error) - * @retval None - */ -#define __HAL_UART_DISABLE_IT(__HANDLE__, __INTERRUPT__) (\ - ((((uint8_t)(__INTERRUPT__)) >> 5U) == 1U)?\ - ((__HANDLE__)->Instance->CR1 &= ~ (1U <<\ - ((__INTERRUPT__) & UART_IT_MASK))): \ - ((((uint8_t)(__INTERRUPT__)) >> 5U) == 2U)?\ - ((__HANDLE__)->Instance->CR2 &= ~ (1U <<\ - ((__INTERRUPT__) & UART_IT_MASK))): \ - ((__HANDLE__)->Instance->CR3 &= ~ (1U <<\ - ((__INTERRUPT__) & UART_IT_MASK)))) - -/** @brief Check whether the specified UART interrupt has occurred or not. - * @param __HANDLE__ specifies the UART Handle. - * @param __INTERRUPT__ specifies the UART interrupt to check. - * This parameter can be one of the following values: - * @arg @ref UART_IT_RXFF RXFIFO Full interrupt - * @arg @ref UART_IT_TXFE TXFIFO Empty interrupt - * @arg @ref UART_IT_RXFT RXFIFO threshold interrupt - * @arg @ref UART_IT_TXFT TXFIFO threshold interrupt - * @arg @ref UART_IT_WUF Wakeup from stop mode interrupt - * @arg @ref UART_IT_CM Character match interrupt - * @arg @ref UART_IT_CTS CTS change interrupt - * @arg @ref UART_IT_LBD LIN Break detection interrupt - * @arg @ref UART_IT_TXE Transmit Data Register empty interrupt - * @arg @ref UART_IT_TXFNF TX FIFO not full interrupt - * @arg @ref UART_IT_TC Transmission complete interrupt - * @arg @ref UART_IT_RXNE Receive Data register not empty interrupt - * @arg @ref UART_IT_RXFNE RXFIFO not empty interrupt - * @arg @ref UART_IT_RTO Receive Timeout interrupt - * @arg @ref UART_IT_IDLE Idle line detection interrupt - * @arg @ref UART_IT_PE Parity Error interrupt - * @arg @ref UART_IT_ERR Error interrupt (Frame error, noise error, overrun error) - * @retval The new state of __INTERRUPT__ (SET or RESET). - */ -#define __HAL_UART_GET_IT(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->ISR\ - & (1U << ((__INTERRUPT__)>> 8U))) != RESET) ? SET : RESET) - -/** @brief Check whether the specified UART interrupt source is enabled or not. - * @param __HANDLE__ specifies the UART Handle. - * @param __INTERRUPT__ specifies the UART interrupt source to check. - * This parameter can be one of the following values: - * @arg @ref UART_IT_RXFF RXFIFO Full interrupt - * @arg @ref UART_IT_TXFE TXFIFO Empty interrupt - * @arg @ref UART_IT_RXFT RXFIFO threshold interrupt - * @arg @ref UART_IT_TXFT TXFIFO threshold interrupt - * @arg @ref UART_IT_WUF Wakeup from stop mode interrupt - * @arg @ref UART_IT_CM Character match interrupt - * @arg @ref UART_IT_CTS CTS change interrupt - * @arg @ref UART_IT_LBD LIN Break detection interrupt - * @arg @ref UART_IT_TXE Transmit Data Register empty interrupt - * @arg @ref UART_IT_TXFNF TX FIFO not full interrupt - * @arg @ref UART_IT_TC Transmission complete interrupt - * @arg @ref UART_IT_RXNE Receive Data register not empty interrupt - * @arg @ref UART_IT_RXFNE RXFIFO not empty interrupt - * @arg @ref UART_IT_RTO Receive Timeout interrupt - * @arg @ref UART_IT_IDLE Idle line detection interrupt - * @arg @ref UART_IT_PE Parity Error interrupt - * @arg @ref UART_IT_ERR Error interrupt (Frame error, noise error, overrun error) - * @retval The new state of __INTERRUPT__ (SET or RESET). - */ -#define __HAL_UART_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((((((uint8_t)(__INTERRUPT__)) >> 5U) == 1U) ?\ - (__HANDLE__)->Instance->CR1 : \ - (((((uint8_t)(__INTERRUPT__)) >> 5U) == 2U) ?\ - (__HANDLE__)->Instance->CR2 : \ - (__HANDLE__)->Instance->CR3)) & (1U <<\ - (((uint16_t)(__INTERRUPT__)) &\ - UART_IT_MASK))) != RESET) ? SET : RESET) - -/** @brief Clear the specified UART ISR flag, in setting the proper ICR register flag. - * @param __HANDLE__ specifies the UART Handle. - * @param __IT_CLEAR__ specifies the interrupt clear register flag that needs to be set - * to clear the corresponding interrupt - * This parameter can be one of the following values: - * @arg @ref UART_CLEAR_PEF Parity Error Clear Flag - * @arg @ref UART_CLEAR_FEF Framing Error Clear Flag - * @arg @ref UART_CLEAR_NEF Noise detected Clear Flag - * @arg @ref UART_CLEAR_OREF Overrun Error Clear Flag - * @arg @ref UART_CLEAR_IDLEF IDLE line detected Clear Flag - * @arg @ref UART_CLEAR_RTOF Receiver timeout clear flag - * @arg @ref UART_CLEAR_TXFECF TXFIFO empty Clear Flag - * @arg @ref UART_CLEAR_TCF Transmission Complete Clear Flag - * @arg @ref UART_CLEAR_LBDF LIN Break Detection Clear Flag - * @arg @ref UART_CLEAR_CTSF CTS Interrupt Clear Flag - * @arg @ref UART_CLEAR_CMF Character Match Clear Flag - * @arg @ref UART_CLEAR_WUF Wake Up from stop mode Clear Flag - * @retval None - */ -#define __HAL_UART_CLEAR_IT(__HANDLE__, __IT_CLEAR__) ((__HANDLE__)->Instance->ICR = (uint32_t)(__IT_CLEAR__)) - -/** @brief Set a specific UART request flag. - * @param __HANDLE__ specifies the UART Handle. - * @param __REQ__ specifies the request flag to set - * This parameter can be one of the following values: - * @arg @ref UART_AUTOBAUD_REQUEST Auto-Baud Rate Request - * @arg @ref UART_SENDBREAK_REQUEST Send Break Request - * @arg @ref UART_MUTE_MODE_REQUEST Mute Mode Request - * @arg @ref UART_RXDATA_FLUSH_REQUEST Receive Data flush Request - * @arg @ref UART_TXDATA_FLUSH_REQUEST Transmit data flush Request - * @retval None - */ -#define __HAL_UART_SEND_REQ(__HANDLE__, __REQ__) ((__HANDLE__)->Instance->RQR |= (uint16_t)(__REQ__)) - -/** @brief Enable the UART one bit sample method. - * @param __HANDLE__ specifies the UART Handle. - * @retval None - */ -#define __HAL_UART_ONE_BIT_SAMPLE_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3|= USART_CR3_ONEBIT) - -/** @brief Disable the UART one bit sample method. - * @param __HANDLE__ specifies the UART Handle. - * @retval None - */ -#define __HAL_UART_ONE_BIT_SAMPLE_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3 &= ~USART_CR3_ONEBIT) - -/** @brief Enable UART. - * @param __HANDLE__ specifies the UART Handle. - * @retval None - */ -#define __HAL_UART_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= USART_CR1_UE) - -/** @brief Disable UART. - * @param __HANDLE__ specifies the UART Handle. - * @retval None - */ -#define __HAL_UART_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= ~USART_CR1_UE) - -/** @brief Enable CTS flow control. - * @note This macro allows to enable CTS hardware flow control for a given UART instance, - * without need to call HAL_UART_Init() function. - * As involving direct access to UART registers, usage of this macro should be fully endorsed by user. - * @note As macro is expected to be used for modifying CTS Hw flow control feature activation, without need - * for USART instance Deinit/Init, following conditions for macro call should be fulfilled : - * - UART instance should have already been initialised (through call of HAL_UART_Init() ) - * - macro could only be called when corresponding UART instance is disabled - * (i.e. __HAL_UART_DISABLE(__HANDLE__)) and should be followed by an Enable - * macro (i.e. __HAL_UART_ENABLE(__HANDLE__)). - * @param __HANDLE__ specifies the UART Handle. - * @retval None - */ -#define __HAL_UART_HWCONTROL_CTS_ENABLE(__HANDLE__) \ - do{ \ - ATOMIC_SET_BIT((__HANDLE__)->Instance->CR3, USART_CR3_CTSE); \ - (__HANDLE__)->Init.HwFlowCtl |= USART_CR3_CTSE; \ - } while(0U) - -/** @brief Disable CTS flow control. - * @note This macro allows to disable CTS hardware flow control for a given UART instance, - * without need to call HAL_UART_Init() function. - * As involving direct access to UART registers, usage of this macro should be fully endorsed by user. - * @note As macro is expected to be used for modifying CTS Hw flow control feature activation, without need - * for USART instance Deinit/Init, following conditions for macro call should be fulfilled : - * - UART instance should have already been initialised (through call of HAL_UART_Init() ) - * - macro could only be called when corresponding UART instance is disabled - * (i.e. __HAL_UART_DISABLE(__HANDLE__)) and should be followed by an Enable - * macro (i.e. __HAL_UART_ENABLE(__HANDLE__)). - * @param __HANDLE__ specifies the UART Handle. - * @retval None - */ -#define __HAL_UART_HWCONTROL_CTS_DISABLE(__HANDLE__) \ - do{ \ - ATOMIC_CLEAR_BIT((__HANDLE__)->Instance->CR3, USART_CR3_CTSE); \ - (__HANDLE__)->Init.HwFlowCtl &= ~(USART_CR3_CTSE); \ - } while(0U) - -/** @brief Enable RTS flow control. - * @note This macro allows to enable RTS hardware flow control for a given UART instance, - * without need to call HAL_UART_Init() function. - * As involving direct access to UART registers, usage of this macro should be fully endorsed by user. - * @note As macro is expected to be used for modifying RTS Hw flow control feature activation, without need - * for USART instance Deinit/Init, following conditions for macro call should be fulfilled : - * - UART instance should have already been initialised (through call of HAL_UART_Init() ) - * - macro could only be called when corresponding UART instance is disabled - * (i.e. __HAL_UART_DISABLE(__HANDLE__)) and should be followed by an Enable - * macro (i.e. __HAL_UART_ENABLE(__HANDLE__)). - * @param __HANDLE__ specifies the UART Handle. - * @retval None - */ -#define __HAL_UART_HWCONTROL_RTS_ENABLE(__HANDLE__) \ - do{ \ - ATOMIC_SET_BIT((__HANDLE__)->Instance->CR3, USART_CR3_RTSE); \ - (__HANDLE__)->Init.HwFlowCtl |= USART_CR3_RTSE; \ - } while(0U) - -/** @brief Disable RTS flow control. - * @note This macro allows to disable RTS hardware flow control for a given UART instance, - * without need to call HAL_UART_Init() function. - * As involving direct access to UART registers, usage of this macro should be fully endorsed by user. - * @note As macro is expected to be used for modifying RTS Hw flow control feature activation, without need - * for USART instance Deinit/Init, following conditions for macro call should be fulfilled : - * - UART instance should have already been initialised (through call of HAL_UART_Init() ) - * - macro could only be called when corresponding UART instance is disabled - * (i.e. __HAL_UART_DISABLE(__HANDLE__)) and should be followed by an Enable - * macro (i.e. __HAL_UART_ENABLE(__HANDLE__)). - * @param __HANDLE__ specifies the UART Handle. - * @retval None - */ -#define __HAL_UART_HWCONTROL_RTS_DISABLE(__HANDLE__) \ - do{ \ - ATOMIC_CLEAR_BIT((__HANDLE__)->Instance->CR3, USART_CR3_RTSE);\ - (__HANDLE__)->Init.HwFlowCtl &= ~(USART_CR3_RTSE); \ - } while(0U) -/** - * @} - */ - -/* Private macros --------------------------------------------------------*/ -/** @defgroup UART_Private_Macros UART Private Macros - * @{ - */ -#if defined(USART_PRESC_PRESCALER) -/** @brief Get UART clok division factor from clock prescaler value. - * @param __CLOCKPRESCALER__ UART prescaler value. - * @retval UART clock division factor - */ -#define UART_GET_DIV_FACTOR(__CLOCKPRESCALER__) \ - (((__CLOCKPRESCALER__) == UART_PRESCALER_DIV1) ? 1U : \ - ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV2) ? 2U : \ - ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV4) ? 4U : \ - ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV6) ? 6U : \ - ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV8) ? 8U : \ - ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV10) ? 10U : \ - ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV12) ? 12U : \ - ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV16) ? 16U : \ - ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV32) ? 32U : \ - ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV64) ? 64U : \ - ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV128) ? 128U : \ - ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV256) ? 256U : 1U) - -/** @brief BRR division operation to set BRR register with LPUART. - * @param __PCLK__ LPUART clock. - * @param __BAUD__ Baud rate set by the user. - * @param __CLOCKPRESCALER__ UART prescaler value. - * @retval Division result - */ -#define UART_DIV_LPUART(__PCLK__, __BAUD__, __CLOCKPRESCALER__) \ - ((uint32_t)((((((uint64_t)(__PCLK__))/(UARTPrescTable[(__CLOCKPRESCALER__)]))*256U)+ \ - (uint32_t)((__BAUD__)/2U)) / (__BAUD__)) \ - ) - -/** @brief BRR division operation to set BRR register in 8-bit oversampling mode. - * @param __PCLK__ UART clock. - * @param __BAUD__ Baud rate set by the user. - * @param __CLOCKPRESCALER__ UART prescaler value. - * @retval Division result - */ -#define UART_DIV_SAMPLING8(__PCLK__, __BAUD__, __CLOCKPRESCALER__) \ - (((((__PCLK__)/UARTPrescTable[(__CLOCKPRESCALER__)])*2U) + ((__BAUD__)/2U)) / (__BAUD__)) - -/** @brief BRR division operation to set BRR register in 16-bit oversampling mode. - * @param __PCLK__ UART clock. - * @param __BAUD__ Baud rate set by the user. - * @param __CLOCKPRESCALER__ UART prescaler value. - * @retval Division result - */ -#define UART_DIV_SAMPLING16(__PCLK__, __BAUD__, __CLOCKPRESCALER__) \ - ((((__PCLK__)/UARTPrescTable[(__CLOCKPRESCALER__)]) + ((__BAUD__)/2U)) / (__BAUD__)) -#else - -/** @brief BRR division operation to set BRR register with LPUART. - * @param __PCLK__ LPUART clock. - * @param __BAUD__ Baud rate set by the user. - * @retval Division result - */ -#define UART_DIV_LPUART(__PCLK__, __BAUD__) (((((uint64_t)(__PCLK__)*256U)) + ((__BAUD__)/2U)) / (__BAUD__)) - -/** @brief BRR division operation to set BRR register in 8-bit oversampling mode. - * @param __PCLK__ UART clock. - * @param __BAUD__ Baud rate set by the user. - * @retval Division result - */ -#define UART_DIV_SAMPLING8(__PCLK__, __BAUD__) ((((__PCLK__)*2U) + ((__BAUD__)/2U)) / (__BAUD__)) - -/** @brief BRR division operation to set BRR register in 16-bit oversampling mode. - * @param __PCLK__ UART clock. - * @param __BAUD__ Baud rate set by the user. - * @retval Division result - */ -#define UART_DIV_SAMPLING16(__PCLK__, __BAUD__) (((__PCLK__) + ((__BAUD__)/2U)) / (__BAUD__)) -#endif /* USART_PRESC_PRESCALER */ - -/** @brief Check whether or not UART instance is Low Power UART. - * @param __HANDLE__ specifies the UART Handle. - * @retval SET (instance is LPUART) or RESET (instance isn't LPUART) - */ -#define UART_INSTANCE_LOWPOWER(__HANDLE__) (IS_LPUART_INSTANCE((__HANDLE__)->Instance)) - -/** @brief Check UART Baud rate. - * @param __BAUDRATE__ Baudrate specified by the user. - * The maximum Baud Rate is derived from the maximum clock on L4 - * divided by the smallest oversampling used on the USART (i.e. 8) - * (i.e. 120 MHz on STM32L4Rx/L4Sx, 80 Mhz otherwise) - * @retval SET (__BAUDRATE__ is valid) or RESET (__BAUDRATE__ is invalid) - */ -#if defined(STM32L4R5xx) || defined(STM32L4R7xx) || defined(STM32L4R9xx) || defined(STM32L4S5xx) || defined(STM32L4S7xx) || defined(STM32L4S9xx) -#define IS_UART_BAUDRATE(__BAUDRATE__) ((__BAUDRATE__) < 15000001U) -#else -#define IS_UART_BAUDRATE(__BAUDRATE__) ((__BAUDRATE__) < 10000001U) -#endif /* STM32L4R5xx || STM32L4R7xx || STM32L4R9xx || STM32L4S5xx || STM32L4S7xx || STM32L4S9xx */ - -/** @brief Check UART assertion time. - * @param __TIME__ 5-bit value assertion time. - * @retval Test result (TRUE or FALSE). - */ -#define IS_UART_ASSERTIONTIME(__TIME__) ((__TIME__) <= 0x1FU) - -/** @brief Check UART deassertion time. - * @param __TIME__ 5-bit value deassertion time. - * @retval Test result (TRUE or FALSE). - */ -#define IS_UART_DEASSERTIONTIME(__TIME__) ((__TIME__) <= 0x1FU) - -/** - * @brief Ensure that UART frame number of stop bits is valid. - * @param __STOPBITS__ UART frame number of stop bits. - * @retval SET (__STOPBITS__ is valid) or RESET (__STOPBITS__ is invalid) - */ -#define IS_UART_STOPBITS(__STOPBITS__) (((__STOPBITS__) == UART_STOPBITS_0_5) || \ - ((__STOPBITS__) == UART_STOPBITS_1) || \ - ((__STOPBITS__) == UART_STOPBITS_1_5) || \ - ((__STOPBITS__) == UART_STOPBITS_2)) - -/** - * @brief Ensure that LPUART frame number of stop bits is valid. - * @param __STOPBITS__ LPUART frame number of stop bits. - * @retval SET (__STOPBITS__ is valid) or RESET (__STOPBITS__ is invalid) - */ -#define IS_LPUART_STOPBITS(__STOPBITS__) (((__STOPBITS__) == UART_STOPBITS_1) || \ - ((__STOPBITS__) == UART_STOPBITS_2)) - -/** - * @brief Ensure that UART frame parity is valid. - * @param __PARITY__ UART frame parity. - * @retval SET (__PARITY__ is valid) or RESET (__PARITY__ is invalid) - */ -#define IS_UART_PARITY(__PARITY__) (((__PARITY__) == UART_PARITY_NONE) || \ - ((__PARITY__) == UART_PARITY_EVEN) || \ - ((__PARITY__) == UART_PARITY_ODD)) - -/** - * @brief Ensure that UART hardware flow control is valid. - * @param __CONTROL__ UART hardware flow control. - * @retval SET (__CONTROL__ is valid) or RESET (__CONTROL__ is invalid) - */ -#define IS_UART_HARDWARE_FLOW_CONTROL(__CONTROL__)\ - (((__CONTROL__) == UART_HWCONTROL_NONE) || \ - ((__CONTROL__) == UART_HWCONTROL_RTS) || \ - ((__CONTROL__) == UART_HWCONTROL_CTS) || \ - ((__CONTROL__) == UART_HWCONTROL_RTS_CTS)) - -/** - * @brief Ensure that UART communication mode is valid. - * @param __MODE__ UART communication mode. - * @retval SET (__MODE__ is valid) or RESET (__MODE__ is invalid) - */ -#define IS_UART_MODE(__MODE__) ((((__MODE__) & (~((uint32_t)(UART_MODE_TX_RX)))) == 0x00U) && ((__MODE__) != 0x00U)) - -/** - * @brief Ensure that UART state is valid. - * @param __STATE__ UART state. - * @retval SET (__STATE__ is valid) or RESET (__STATE__ is invalid) - */ -#define IS_UART_STATE(__STATE__) (((__STATE__) == UART_STATE_DISABLE) || \ - ((__STATE__) == UART_STATE_ENABLE)) - -/** - * @brief Ensure that UART oversampling is valid. - * @param __SAMPLING__ UART oversampling. - * @retval SET (__SAMPLING__ is valid) or RESET (__SAMPLING__ is invalid) - */ -#define IS_UART_OVERSAMPLING(__SAMPLING__) (((__SAMPLING__) == UART_OVERSAMPLING_16) || \ - ((__SAMPLING__) == UART_OVERSAMPLING_8)) - -/** - * @brief Ensure that UART frame sampling is valid. - * @param __ONEBIT__ UART frame sampling. - * @retval SET (__ONEBIT__ is valid) or RESET (__ONEBIT__ is invalid) - */ -#define IS_UART_ONE_BIT_SAMPLE(__ONEBIT__) (((__ONEBIT__) == UART_ONE_BIT_SAMPLE_DISABLE) || \ - ((__ONEBIT__) == UART_ONE_BIT_SAMPLE_ENABLE)) - -/** - * @brief Ensure that UART auto Baud rate detection mode is valid. - * @param __MODE__ UART auto Baud rate detection mode. - * @retval SET (__MODE__ is valid) or RESET (__MODE__ is invalid) - */ -#define IS_UART_ADVFEATURE_AUTOBAUDRATEMODE(__MODE__) (((__MODE__) == UART_ADVFEATURE_AUTOBAUDRATE_ONSTARTBIT) || \ - ((__MODE__) == UART_ADVFEATURE_AUTOBAUDRATE_ONFALLINGEDGE) || \ - ((__MODE__) == UART_ADVFEATURE_AUTOBAUDRATE_ON0X7FFRAME) || \ - ((__MODE__) == UART_ADVFEATURE_AUTOBAUDRATE_ON0X55FRAME)) - -/** - * @brief Ensure that UART receiver timeout setting is valid. - * @param __TIMEOUT__ UART receiver timeout setting. - * @retval SET (__TIMEOUT__ is valid) or RESET (__TIMEOUT__ is invalid) - */ -#define IS_UART_RECEIVER_TIMEOUT(__TIMEOUT__) (((__TIMEOUT__) == UART_RECEIVER_TIMEOUT_DISABLE) || \ - ((__TIMEOUT__) == UART_RECEIVER_TIMEOUT_ENABLE)) - -/** @brief Check the receiver timeout value. - * @note The maximum UART receiver timeout value is 0xFFFFFF. - * @param __TIMEOUTVALUE__ receiver timeout value. - * @retval Test result (TRUE or FALSE) - */ -#define IS_UART_RECEIVER_TIMEOUT_VALUE(__TIMEOUTVALUE__) ((__TIMEOUTVALUE__) <= 0xFFFFFFU) - -/** - * @brief Ensure that UART LIN state is valid. - * @param __LIN__ UART LIN state. - * @retval SET (__LIN__ is valid) or RESET (__LIN__ is invalid) - */ -#define IS_UART_LIN(__LIN__) (((__LIN__) == UART_LIN_DISABLE) || \ - ((__LIN__) == UART_LIN_ENABLE)) - -/** - * @brief Ensure that UART LIN break detection length is valid. - * @param __LENGTH__ UART LIN break detection length. - * @retval SET (__LENGTH__ is valid) or RESET (__LENGTH__ is invalid) - */ -#define IS_UART_LIN_BREAK_DETECT_LENGTH(__LENGTH__) (((__LENGTH__) == UART_LINBREAKDETECTLENGTH_10B) || \ - ((__LENGTH__) == UART_LINBREAKDETECTLENGTH_11B)) - -/** - * @brief Ensure that UART DMA TX state is valid. - * @param __DMATX__ UART DMA TX state. - * @retval SET (__DMATX__ is valid) or RESET (__DMATX__ is invalid) - */ -#define IS_UART_DMA_TX(__DMATX__) (((__DMATX__) == UART_DMA_TX_DISABLE) || \ - ((__DMATX__) == UART_DMA_TX_ENABLE)) - -/** - * @brief Ensure that UART DMA RX state is valid. - * @param __DMARX__ UART DMA RX state. - * @retval SET (__DMARX__ is valid) or RESET (__DMARX__ is invalid) - */ -#define IS_UART_DMA_RX(__DMARX__) (((__DMARX__) == UART_DMA_RX_DISABLE) || \ - ((__DMARX__) == UART_DMA_RX_ENABLE)) - -/** - * @brief Ensure that UART half-duplex state is valid. - * @param __HDSEL__ UART half-duplex state. - * @retval SET (__HDSEL__ is valid) or RESET (__HDSEL__ is invalid) - */ -#define IS_UART_HALF_DUPLEX(__HDSEL__) (((__HDSEL__) == UART_HALF_DUPLEX_DISABLE) || \ - ((__HDSEL__) == UART_HALF_DUPLEX_ENABLE)) - -/** - * @brief Ensure that UART wake-up method is valid. - * @param __WAKEUP__ UART wake-up method . - * @retval SET (__WAKEUP__ is valid) or RESET (__WAKEUP__ is invalid) - */ -#define IS_UART_WAKEUPMETHOD(__WAKEUP__) (((__WAKEUP__) == UART_WAKEUPMETHOD_IDLELINE) || \ - ((__WAKEUP__) == UART_WAKEUPMETHOD_ADDRESSMARK)) - -/** - * @brief Ensure that UART request parameter is valid. - * @param __PARAM__ UART request parameter. - * @retval SET (__PARAM__ is valid) or RESET (__PARAM__ is invalid) - */ -#define IS_UART_REQUEST_PARAMETER(__PARAM__) (((__PARAM__) == UART_AUTOBAUD_REQUEST) || \ - ((__PARAM__) == UART_SENDBREAK_REQUEST) || \ - ((__PARAM__) == UART_MUTE_MODE_REQUEST) || \ - ((__PARAM__) == UART_RXDATA_FLUSH_REQUEST) || \ - ((__PARAM__) == UART_TXDATA_FLUSH_REQUEST)) - -/** - * @brief Ensure that UART advanced features initialization is valid. - * @param __INIT__ UART advanced features initialization. - * @retval SET (__INIT__ is valid) or RESET (__INIT__ is invalid) - */ -#define IS_UART_ADVFEATURE_INIT(__INIT__) ((__INIT__) <= (UART_ADVFEATURE_NO_INIT | \ - UART_ADVFEATURE_TXINVERT_INIT | \ - UART_ADVFEATURE_RXINVERT_INIT | \ - UART_ADVFEATURE_DATAINVERT_INIT | \ - UART_ADVFEATURE_SWAP_INIT | \ - UART_ADVFEATURE_RXOVERRUNDISABLE_INIT | \ - UART_ADVFEATURE_DMADISABLEONERROR_INIT | \ - UART_ADVFEATURE_AUTOBAUDRATE_INIT | \ - UART_ADVFEATURE_MSBFIRST_INIT)) - -/** - * @brief Ensure that UART frame TX inversion setting is valid. - * @param __TXINV__ UART frame TX inversion setting. - * @retval SET (__TXINV__ is valid) or RESET (__TXINV__ is invalid) - */ -#define IS_UART_ADVFEATURE_TXINV(__TXINV__) (((__TXINV__) == UART_ADVFEATURE_TXINV_DISABLE) || \ - ((__TXINV__) == UART_ADVFEATURE_TXINV_ENABLE)) - -/** - * @brief Ensure that UART frame RX inversion setting is valid. - * @param __RXINV__ UART frame RX inversion setting. - * @retval SET (__RXINV__ is valid) or RESET (__RXINV__ is invalid) - */ -#define IS_UART_ADVFEATURE_RXINV(__RXINV__) (((__RXINV__) == UART_ADVFEATURE_RXINV_DISABLE) || \ - ((__RXINV__) == UART_ADVFEATURE_RXINV_ENABLE)) - -/** - * @brief Ensure that UART frame data inversion setting is valid. - * @param __DATAINV__ UART frame data inversion setting. - * @retval SET (__DATAINV__ is valid) or RESET (__DATAINV__ is invalid) - */ -#define IS_UART_ADVFEATURE_DATAINV(__DATAINV__) (((__DATAINV__) == UART_ADVFEATURE_DATAINV_DISABLE) || \ - ((__DATAINV__) == UART_ADVFEATURE_DATAINV_ENABLE)) - -/** - * @brief Ensure that UART frame RX/TX pins swap setting is valid. - * @param __SWAP__ UART frame RX/TX pins swap setting. - * @retval SET (__SWAP__ is valid) or RESET (__SWAP__ is invalid) - */ -#define IS_UART_ADVFEATURE_SWAP(__SWAP__) (((__SWAP__) == UART_ADVFEATURE_SWAP_DISABLE) || \ - ((__SWAP__) == UART_ADVFEATURE_SWAP_ENABLE)) - -/** - * @brief Ensure that UART frame overrun setting is valid. - * @param __OVERRUN__ UART frame overrun setting. - * @retval SET (__OVERRUN__ is valid) or RESET (__OVERRUN__ is invalid) - */ -#define IS_UART_OVERRUN(__OVERRUN__) (((__OVERRUN__) == UART_ADVFEATURE_OVERRUN_ENABLE) || \ - ((__OVERRUN__) == UART_ADVFEATURE_OVERRUN_DISABLE)) - -/** - * @brief Ensure that UART auto Baud rate state is valid. - * @param __AUTOBAUDRATE__ UART auto Baud rate state. - * @retval SET (__AUTOBAUDRATE__ is valid) or RESET (__AUTOBAUDRATE__ is invalid) - */ -#define IS_UART_ADVFEATURE_AUTOBAUDRATE(__AUTOBAUDRATE__) (((__AUTOBAUDRATE__) == \ - UART_ADVFEATURE_AUTOBAUDRATE_DISABLE) || \ - ((__AUTOBAUDRATE__) == UART_ADVFEATURE_AUTOBAUDRATE_ENABLE)) - -/** - * @brief Ensure that UART DMA enabling or disabling on error setting is valid. - * @param __DMA__ UART DMA enabling or disabling on error setting. - * @retval SET (__DMA__ is valid) or RESET (__DMA__ is invalid) - */ -#define IS_UART_ADVFEATURE_DMAONRXERROR(__DMA__) (((__DMA__) == UART_ADVFEATURE_DMA_ENABLEONRXERROR) || \ - ((__DMA__) == UART_ADVFEATURE_DMA_DISABLEONRXERROR)) - -/** - * @brief Ensure that UART frame MSB first setting is valid. - * @param __MSBFIRST__ UART frame MSB first setting. - * @retval SET (__MSBFIRST__ is valid) or RESET (__MSBFIRST__ is invalid) - */ -#define IS_UART_ADVFEATURE_MSBFIRST(__MSBFIRST__) (((__MSBFIRST__) == UART_ADVFEATURE_MSBFIRST_DISABLE) || \ - ((__MSBFIRST__) == UART_ADVFEATURE_MSBFIRST_ENABLE)) - -/** - * @brief Ensure that UART stop mode state is valid. - * @param __STOPMODE__ UART stop mode state. - * @retval SET (__STOPMODE__ is valid) or RESET (__STOPMODE__ is invalid) - */ -#define IS_UART_ADVFEATURE_STOPMODE(__STOPMODE__) (((__STOPMODE__) == UART_ADVFEATURE_STOPMODE_DISABLE) || \ - ((__STOPMODE__) == UART_ADVFEATURE_STOPMODE_ENABLE)) - -/** - * @brief Ensure that UART mute mode state is valid. - * @param __MUTE__ UART mute mode state. - * @retval SET (__MUTE__ is valid) or RESET (__MUTE__ is invalid) - */ -#define IS_UART_MUTE_MODE(__MUTE__) (((__MUTE__) == UART_ADVFEATURE_MUTEMODE_DISABLE) || \ - ((__MUTE__) == UART_ADVFEATURE_MUTEMODE_ENABLE)) - -/** - * @brief Ensure that UART wake-up selection is valid. - * @param __WAKE__ UART wake-up selection. - * @retval SET (__WAKE__ is valid) or RESET (__WAKE__ is invalid) - */ -#define IS_UART_WAKEUP_SELECTION(__WAKE__) (((__WAKE__) == UART_WAKEUP_ON_ADDRESS) || \ - ((__WAKE__) == UART_WAKEUP_ON_STARTBIT) || \ - ((__WAKE__) == UART_WAKEUP_ON_READDATA_NONEMPTY)) - -/** - * @brief Ensure that UART driver enable polarity is valid. - * @param __POLARITY__ UART driver enable polarity. - * @retval SET (__POLARITY__ is valid) or RESET (__POLARITY__ is invalid) - */ -#define IS_UART_DE_POLARITY(__POLARITY__) (((__POLARITY__) == UART_DE_POLARITY_HIGH) || \ - ((__POLARITY__) == UART_DE_POLARITY_LOW)) - -#if defined(USART_PRESC_PRESCALER) -/** - * @brief Ensure that UART Prescaler is valid. - * @param __CLOCKPRESCALER__ UART Prescaler value. - * @retval SET (__CLOCKPRESCALER__ is valid) or RESET (__CLOCKPRESCALER__ is invalid) - */ -#define IS_UART_PRESCALER(__CLOCKPRESCALER__) (((__CLOCKPRESCALER__) == UART_PRESCALER_DIV1) || \ - ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV2) || \ - ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV4) || \ - ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV6) || \ - ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV8) || \ - ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV10) || \ - ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV12) || \ - ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV16) || \ - ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV32) || \ - ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV64) || \ - ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV128) || \ - ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV256)) -#endif /* USART_PRESC_PRESCALER */ - -/** - * @} - */ - -/* Include UART HAL Extended module */ -#include "stm32l4xx_hal_uart_ex.h" - -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup UART_Exported_Functions UART Exported Functions - * @{ - */ - -/** @addtogroup UART_Exported_Functions_Group1 Initialization and de-initialization functions - * @{ - */ - -/* Initialization and de-initialization functions ****************************/ -HAL_StatusTypeDef HAL_UART_Init(UART_HandleTypeDef *huart); -HAL_StatusTypeDef HAL_HalfDuplex_Init(UART_HandleTypeDef *huart); -HAL_StatusTypeDef HAL_LIN_Init(UART_HandleTypeDef *huart, uint32_t BreakDetectLength); -HAL_StatusTypeDef HAL_MultiProcessor_Init(UART_HandleTypeDef *huart, uint8_t Address, uint32_t WakeUpMethod); -HAL_StatusTypeDef HAL_UART_DeInit(UART_HandleTypeDef *huart); -void HAL_UART_MspInit(UART_HandleTypeDef *huart); -void HAL_UART_MspDeInit(UART_HandleTypeDef *huart); - -/* Callbacks Register/UnRegister functions ***********************************/ -#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) -HAL_StatusTypeDef HAL_UART_RegisterCallback(UART_HandleTypeDef *huart, HAL_UART_CallbackIDTypeDef CallbackID, - pUART_CallbackTypeDef pCallback); -HAL_StatusTypeDef HAL_UART_UnRegisterCallback(UART_HandleTypeDef *huart, HAL_UART_CallbackIDTypeDef CallbackID); - -HAL_StatusTypeDef HAL_UART_RegisterRxEventCallback(UART_HandleTypeDef *huart, pUART_RxEventCallbackTypeDef pCallback); -HAL_StatusTypeDef HAL_UART_UnRegisterRxEventCallback(UART_HandleTypeDef *huart); -#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ - -/** - * @} - */ - -/** @addtogroup UART_Exported_Functions_Group2 IO operation functions - * @{ - */ - -/* IO operation functions *****************************************************/ -HAL_StatusTypeDef HAL_UART_Transmit(UART_HandleTypeDef *huart, const uint8_t *pData, uint16_t Size, uint32_t Timeout); -HAL_StatusTypeDef HAL_UART_Receive(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint32_t Timeout); -HAL_StatusTypeDef HAL_UART_Transmit_IT(UART_HandleTypeDef *huart, const uint8_t *pData, uint16_t Size); -HAL_StatusTypeDef HAL_UART_Receive_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size); -HAL_StatusTypeDef HAL_UART_Transmit_DMA(UART_HandleTypeDef *huart, const uint8_t *pData, uint16_t Size); -HAL_StatusTypeDef HAL_UART_Receive_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size); -HAL_StatusTypeDef HAL_UART_DMAPause(UART_HandleTypeDef *huart); -HAL_StatusTypeDef HAL_UART_DMAResume(UART_HandleTypeDef *huart); -HAL_StatusTypeDef HAL_UART_DMAStop(UART_HandleTypeDef *huart); -/* Transfer Abort functions */ -HAL_StatusTypeDef HAL_UART_Abort(UART_HandleTypeDef *huart); -HAL_StatusTypeDef HAL_UART_AbortTransmit(UART_HandleTypeDef *huart); -HAL_StatusTypeDef HAL_UART_AbortReceive(UART_HandleTypeDef *huart); -HAL_StatusTypeDef HAL_UART_Abort_IT(UART_HandleTypeDef *huart); -HAL_StatusTypeDef HAL_UART_AbortTransmit_IT(UART_HandleTypeDef *huart); -HAL_StatusTypeDef HAL_UART_AbortReceive_IT(UART_HandleTypeDef *huart); - -void HAL_UART_IRQHandler(UART_HandleTypeDef *huart); -void HAL_UART_TxHalfCpltCallback(UART_HandleTypeDef *huart); -void HAL_UART_TxCpltCallback(UART_HandleTypeDef *huart); -void HAL_UART_RxHalfCpltCallback(UART_HandleTypeDef *huart); -void HAL_UART_RxCpltCallback(UART_HandleTypeDef *huart); -void HAL_UART_ErrorCallback(UART_HandleTypeDef *huart); -void HAL_UART_AbortCpltCallback(UART_HandleTypeDef *huart); -void HAL_UART_AbortTransmitCpltCallback(UART_HandleTypeDef *huart); -void HAL_UART_AbortReceiveCpltCallback(UART_HandleTypeDef *huart); - -void HAL_UARTEx_RxEventCallback(UART_HandleTypeDef *huart, uint16_t Size); - -/** - * @} - */ - -/** @addtogroup UART_Exported_Functions_Group3 Peripheral Control functions - * @{ - */ - -/* Peripheral Control functions ************************************************/ -void HAL_UART_ReceiverTimeout_Config(UART_HandleTypeDef *huart, uint32_t TimeoutValue); -HAL_StatusTypeDef HAL_UART_EnableReceiverTimeout(UART_HandleTypeDef *huart); -HAL_StatusTypeDef HAL_UART_DisableReceiverTimeout(UART_HandleTypeDef *huart); - -HAL_StatusTypeDef HAL_LIN_SendBreak(UART_HandleTypeDef *huart); -HAL_StatusTypeDef HAL_MultiProcessor_EnableMuteMode(UART_HandleTypeDef *huart); -HAL_StatusTypeDef HAL_MultiProcessor_DisableMuteMode(UART_HandleTypeDef *huart); -void HAL_MultiProcessor_EnterMuteMode(UART_HandleTypeDef *huart); -HAL_StatusTypeDef HAL_HalfDuplex_EnableTransmitter(UART_HandleTypeDef *huart); -HAL_StatusTypeDef HAL_HalfDuplex_EnableReceiver(UART_HandleTypeDef *huart); - -/** - * @} - */ - -/** @addtogroup UART_Exported_Functions_Group4 Peripheral State and Error functions - * @{ - */ - -/* Peripheral State and Errors functions **************************************************/ -HAL_UART_StateTypeDef HAL_UART_GetState(const UART_HandleTypeDef *huart); -uint32_t HAL_UART_GetError(const UART_HandleTypeDef *huart); - -/** - * @} - */ - -/** - * @} - */ - -/* Private functions -----------------------------------------------------------*/ -/** @addtogroup UART_Private_Functions UART Private Functions - * @{ - */ -#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) -void UART_InitCallbacksToDefault(UART_HandleTypeDef *huart); -#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ -HAL_StatusTypeDef UART_SetConfig(UART_HandleTypeDef *huart); -HAL_StatusTypeDef UART_CheckIdleState(UART_HandleTypeDef *huart); -HAL_StatusTypeDef UART_WaitOnFlagUntilTimeout(UART_HandleTypeDef *huart, uint32_t Flag, FlagStatus Status, - uint32_t Tickstart, uint32_t Timeout); -void UART_AdvFeatureConfig(UART_HandleTypeDef *huart); -HAL_StatusTypeDef UART_Start_Receive_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size); -HAL_StatusTypeDef UART_Start_Receive_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size); - -/** - * @} - */ - -/* Private variables -----------------------------------------------------------*/ -#if defined(USART_PRESC_PRESCALER) -/** @defgroup UART_Private_variables UART Private variables - * @{ - */ -/* Prescaler Table used in BRR computation macros. - Declared as extern here to allow use of private UART macros, outside of HAL UART functions */ -extern const uint16_t UARTPrescTable[12]; -/** - * @} - */ - -#endif /* USART_PRESC_PRESCALER */ -/** - * @} - */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /* STM32L4xx_HAL_UART_H */ - +/** + ****************************************************************************** + * @file stm32l4xx_hal_uart.h + * @author MCD Application Team + * @brief Header file of UART HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32L4xx_HAL_UART_H +#define STM32L4xx_HAL_UART_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l4xx_hal_def.h" + +/** @addtogroup STM32L4xx_HAL_Driver + * @{ + */ + +/** @addtogroup UART + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup UART_Exported_Types UART Exported Types + * @{ + */ + +/** + * @brief UART Init Structure definition + */ +typedef struct +{ + uint32_t BaudRate; /*!< This member configures the UART communication baud rate. + The baud rate register is computed using the following formula: + LPUART: + ======= + Baud Rate Register = ((256 * lpuart_ker_ckpres) / ((huart->Init.BaudRate))) + where lpuart_ker_ck_pres is the UART input clock + (divided by a prescaler if applicable) + UART: + ===== + - If oversampling is 16 or in LIN mode, + Baud Rate Register = ((uart_ker_ckpres) / ((huart->Init.BaudRate))) + - If oversampling is 8, + Baud Rate Register[15:4] = ((2 * uart_ker_ckpres) / + ((huart->Init.BaudRate)))[15:4] + Baud Rate Register[3] = 0 + Baud Rate Register[2:0] = (((2 * uart_ker_ckpres) / + ((huart->Init.BaudRate)))[3:0]) >> 1 + where uart_ker_ck_pres is the UART input clock + (divided by a prescaler if applicable) */ + + uint32_t WordLength; /*!< Specifies the number of data bits transmitted or received in a frame. + This parameter can be a value of @ref UARTEx_Word_Length. */ + + uint32_t StopBits; /*!< Specifies the number of stop bits transmitted. + This parameter can be a value of @ref UART_Stop_Bits. */ + + uint32_t Parity; /*!< Specifies the parity mode. + This parameter can be a value of @ref UART_Parity + @note When parity is enabled, the computed parity is inserted + at the MSB position of the transmitted data (9th bit when + the word length is set to 9 data bits; 8th bit when the + word length is set to 8 data bits). */ + + uint32_t Mode; /*!< Specifies whether the Receive or Transmit mode is enabled or disabled. + This parameter can be a value of @ref UART_Mode. */ + + uint32_t HwFlowCtl; /*!< Specifies whether the hardware flow control mode is enabled + or disabled. + This parameter can be a value of @ref UART_Hardware_Flow_Control. */ + + uint32_t OverSampling; /*!< Specifies whether the Over sampling 8 is enabled or disabled, + to achieve higher speed (up to f_PCLK/8). + This parameter can be a value of @ref UART_Over_Sampling. */ + + uint32_t OneBitSampling; /*!< Specifies whether a single sample or three samples' majority vote is selected. + Selecting the single sample method increases the receiver tolerance to clock + deviations. This parameter can be a value of @ref UART_OneBit_Sampling. */ + +#if defined(USART_PRESC_PRESCALER) + uint32_t ClockPrescaler; /*!< Specifies the prescaler value used to divide the UART clock source. + This parameter can be a value of @ref UART_ClockPrescaler. */ +#endif /* USART_PRESC_PRESCALER */ + +} UART_InitTypeDef; + +/** + * @brief UART Advanced Features initialization structure definition + */ +typedef struct +{ + uint32_t AdvFeatureInit; /*!< Specifies which advanced UART features is initialized. Several + Advanced Features may be initialized at the same time . + This parameter can be a value of + @ref UART_Advanced_Features_Initialization_Type. */ + + uint32_t TxPinLevelInvert; /*!< Specifies whether the TX pin active level is inverted. + This parameter can be a value of @ref UART_Tx_Inv. */ + + uint32_t RxPinLevelInvert; /*!< Specifies whether the RX pin active level is inverted. + This parameter can be a value of @ref UART_Rx_Inv. */ + + uint32_t DataInvert; /*!< Specifies whether data are inverted (positive/direct logic + vs negative/inverted logic). + This parameter can be a value of @ref UART_Data_Inv. */ + + uint32_t Swap; /*!< Specifies whether TX and RX pins are swapped. + This parameter can be a value of @ref UART_Rx_Tx_Swap. */ + + uint32_t OverrunDisable; /*!< Specifies whether the reception overrun detection is disabled. + This parameter can be a value of @ref UART_Overrun_Disable. */ + + uint32_t DMADisableonRxError; /*!< Specifies whether the DMA is disabled in case of reception error. + This parameter can be a value of @ref UART_DMA_Disable_on_Rx_Error. */ + + uint32_t AutoBaudRateEnable; /*!< Specifies whether auto Baud rate detection is enabled. + This parameter can be a value of @ref UART_AutoBaudRate_Enable. */ + + uint32_t AutoBaudRateMode; /*!< If auto Baud rate detection is enabled, specifies how the rate + detection is carried out. + This parameter can be a value of @ref UART_AutoBaud_Rate_Mode. */ + + uint32_t MSBFirst; /*!< Specifies whether MSB is sent first on UART line. + This parameter can be a value of @ref UART_MSB_First. */ +} UART_AdvFeatureInitTypeDef; + +/** + * @brief HAL UART State definition + * @note HAL UART State value is a combination of 2 different substates: + * gState and RxState (see @ref UART_State_Definition). + * - gState contains UART state information related to global Handle management + * and also information related to Tx operations. + * gState value coding follow below described bitmap : + * b7-b6 Error information + * 00 : No Error + * 01 : (Not Used) + * 10 : Timeout + * 11 : Error + * b5 Peripheral initialization status + * 0 : Reset (Peripheral not initialized) + * 1 : Init done (Peripheral initialized. HAL UART Init function already called) + * b4-b3 (not used) + * xx : Should be set to 00 + * b2 Intrinsic process state + * 0 : Ready + * 1 : Busy (Peripheral busy with some configuration or internal operations) + * b1 (not used) + * x : Should be set to 0 + * b0 Tx state + * 0 : Ready (no Tx operation ongoing) + * 1 : Busy (Tx operation ongoing) + * - RxState contains information related to Rx operations. + * RxState value coding follow below described bitmap : + * b7-b6 (not used) + * xx : Should be set to 00 + * b5 Peripheral initialization status + * 0 : Reset (Peripheral not initialized) + * 1 : Init done (Peripheral initialized) + * b4-b2 (not used) + * xxx : Should be set to 000 + * b1 Rx state + * 0 : Ready (no Rx operation ongoing) + * 1 : Busy (Rx operation ongoing) + * b0 (not used) + * x : Should be set to 0. + */ +typedef uint32_t HAL_UART_StateTypeDef; + +/** + * @brief UART clock sources definition + */ +typedef enum +{ + UART_CLOCKSOURCE_PCLK1 = 0x00U, /*!< PCLK1 clock source */ + UART_CLOCKSOURCE_PCLK2 = 0x01U, /*!< PCLK2 clock source */ + UART_CLOCKSOURCE_HSI = 0x02U, /*!< HSI clock source */ + UART_CLOCKSOURCE_SYSCLK = 0x04U, /*!< SYSCLK clock source */ + UART_CLOCKSOURCE_LSE = 0x08U, /*!< LSE clock source */ + UART_CLOCKSOURCE_UNDEFINED = 0x10U /*!< Undefined clock source */ +} UART_ClockSourceTypeDef; + +/** + * @brief HAL UART Reception type definition + * @note HAL UART Reception type value aims to identify which type of Reception is ongoing. + * This parameter can be a value of @ref UART_Reception_Type_Values : + * HAL_UART_RECEPTION_STANDARD = 0x00U, + * HAL_UART_RECEPTION_TOIDLE = 0x01U, + * HAL_UART_RECEPTION_TORTO = 0x02U, + * HAL_UART_RECEPTION_TOCHARMATCH = 0x03U, + */ +typedef uint32_t HAL_UART_RxTypeTypeDef; + +/** + * @brief HAL UART Rx Event type definition + * @note HAL UART Rx Event type value aims to identify which type of Event has occurred + * leading to call of the RxEvent callback. + * This parameter can be a value of @ref UART_RxEvent_Type_Values : + * HAL_UART_RXEVENT_TC = 0x00U, + * HAL_UART_RXEVENT_HT = 0x01U, + * HAL_UART_RXEVENT_IDLE = 0x02U, + */ +typedef uint32_t HAL_UART_RxEventTypeTypeDef; + +/** + * @brief UART handle Structure definition + */ +typedef struct __UART_HandleTypeDef +{ + USART_TypeDef *Instance; /*!< UART registers base address */ + + UART_InitTypeDef Init; /*!< UART communication parameters */ + + UART_AdvFeatureInitTypeDef AdvancedInit; /*!< UART Advanced Features initialization parameters */ + + const uint8_t *pTxBuffPtr; /*!< Pointer to UART Tx transfer Buffer */ + + uint16_t TxXferSize; /*!< UART Tx Transfer size */ + + __IO uint16_t TxXferCount; /*!< UART Tx Transfer Counter */ + + uint8_t *pRxBuffPtr; /*!< Pointer to UART Rx transfer Buffer */ + + uint16_t RxXferSize; /*!< UART Rx Transfer size */ + + __IO uint16_t RxXferCount; /*!< UART Rx Transfer Counter */ + + uint16_t Mask; /*!< UART Rx RDR register mask */ + +#if defined(USART_CR1_FIFOEN) + uint32_t FifoMode; /*!< Specifies if the FIFO mode is being used. + This parameter can be a value of @ref UARTEx_FIFO_mode. */ + + uint16_t NbRxDataToProcess; /*!< Number of data to process during RX ISR execution */ + + uint16_t NbTxDataToProcess; /*!< Number of data to process during TX ISR execution */ + +#endif /*USART_CR1_FIFOEN */ + __IO HAL_UART_RxTypeTypeDef ReceptionType; /*!< Type of ongoing reception */ + + __IO HAL_UART_RxEventTypeTypeDef RxEventType; /*!< Type of Rx Event */ + + void (*RxISR)(struct __UART_HandleTypeDef *huart); /*!< Function pointer on Rx IRQ handler */ + + void (*TxISR)(struct __UART_HandleTypeDef *huart); /*!< Function pointer on Tx IRQ handler */ + + DMA_HandleTypeDef *hdmatx; /*!< UART Tx DMA Handle parameters */ + + DMA_HandleTypeDef *hdmarx; /*!< UART Rx DMA Handle parameters */ + + HAL_LockTypeDef Lock; /*!< Locking object */ + + __IO HAL_UART_StateTypeDef gState; /*!< UART state information related to global Handle management + and also related to Tx operations. This parameter + can be a value of @ref HAL_UART_StateTypeDef */ + + __IO HAL_UART_StateTypeDef RxState; /*!< UART state information related to Rx operations. This + parameter can be a value of @ref HAL_UART_StateTypeDef */ + + __IO uint32_t ErrorCode; /*!< UART Error code */ + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + void (* TxHalfCpltCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Tx Half Complete Callback */ + void (* TxCpltCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Tx Complete Callback */ + void (* RxHalfCpltCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Rx Half Complete Callback */ + void (* RxCpltCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Rx Complete Callback */ + void (* ErrorCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Error Callback */ + void (* AbortCpltCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Abort Complete Callback */ + void (* AbortTransmitCpltCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Abort Transmit Complete Callback */ + void (* AbortReceiveCpltCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Abort Receive Complete Callback */ + void (* WakeupCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Wakeup Callback */ +#if defined(USART_CR1_FIFOEN) + void (* RxFifoFullCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Rx Fifo Full Callback */ + void (* TxFifoEmptyCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Tx Fifo Empty Callback */ +#endif /* USART_CR1_FIFOEN */ + void (* RxEventCallback)(struct __UART_HandleTypeDef *huart, uint16_t Pos); /*!< UART Reception Event Callback */ + + void (* MspInitCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Msp Init callback */ + void (* MspDeInitCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Msp DeInit callback */ +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + +} UART_HandleTypeDef; + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) +/** + * @brief HAL UART Callback ID enumeration definition + */ +typedef enum +{ + HAL_UART_TX_HALFCOMPLETE_CB_ID = 0x00U, /*!< UART Tx Half Complete Callback ID */ + HAL_UART_TX_COMPLETE_CB_ID = 0x01U, /*!< UART Tx Complete Callback ID */ + HAL_UART_RX_HALFCOMPLETE_CB_ID = 0x02U, /*!< UART Rx Half Complete Callback ID */ + HAL_UART_RX_COMPLETE_CB_ID = 0x03U, /*!< UART Rx Complete Callback ID */ + HAL_UART_ERROR_CB_ID = 0x04U, /*!< UART Error Callback ID */ + HAL_UART_ABORT_COMPLETE_CB_ID = 0x05U, /*!< UART Abort Complete Callback ID */ + HAL_UART_ABORT_TRANSMIT_COMPLETE_CB_ID = 0x06U, /*!< UART Abort Transmit Complete Callback ID */ + HAL_UART_ABORT_RECEIVE_COMPLETE_CB_ID = 0x07U, /*!< UART Abort Receive Complete Callback ID */ + HAL_UART_WAKEUP_CB_ID = 0x08U, /*!< UART Wakeup Callback ID */ +#if defined(USART_CR1_FIFOEN) + HAL_UART_RX_FIFO_FULL_CB_ID = 0x09U, /*!< UART Rx Fifo Full Callback ID */ + HAL_UART_TX_FIFO_EMPTY_CB_ID = 0x0AU, /*!< UART Tx Fifo Empty Callback ID */ +#endif /* USART_CR1_FIFOEN */ + + HAL_UART_MSPINIT_CB_ID = 0x0BU, /*!< UART MspInit callback ID */ + HAL_UART_MSPDEINIT_CB_ID = 0x0CU /*!< UART MspDeInit callback ID */ + +} HAL_UART_CallbackIDTypeDef; + +/** + * @brief HAL UART Callback pointer definition + */ +typedef void (*pUART_CallbackTypeDef)(UART_HandleTypeDef *huart); /*!< pointer to an UART callback function */ +typedef void (*pUART_RxEventCallbackTypeDef) +(struct __UART_HandleTypeDef *huart, uint16_t Pos); /*!< pointer to a UART Rx Event specific callback function */ + +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup UART_Exported_Constants UART Exported Constants + * @{ + */ + +/** @defgroup UART_State_Definition UART State Code Definition + * @{ + */ +#define HAL_UART_STATE_RESET 0x00000000U /*!< Peripheral is not initialized + Value is allowed for gState and RxState */ +#define HAL_UART_STATE_READY 0x00000020U /*!< Peripheral Initialized and ready for use + Value is allowed for gState and RxState */ +#define HAL_UART_STATE_BUSY 0x00000024U /*!< an internal process is ongoing + Value is allowed for gState only */ +#define HAL_UART_STATE_BUSY_TX 0x00000021U /*!< Data Transmission process is ongoing + Value is allowed for gState only */ +#define HAL_UART_STATE_BUSY_RX 0x00000022U /*!< Data Reception process is ongoing + Value is allowed for RxState only */ +#define HAL_UART_STATE_BUSY_TX_RX 0x00000023U /*!< Data Transmission and Reception process is ongoing + Not to be used for neither gState nor RxState.Value is result + of combination (Or) between gState and RxState values */ +#define HAL_UART_STATE_TIMEOUT 0x000000A0U /*!< Timeout state + Value is allowed for gState only */ +#define HAL_UART_STATE_ERROR 0x000000E0U /*!< Error + Value is allowed for gState only */ +/** + * @} + */ + +/** @defgroup UART_Error_Definition UART Error Definition + * @{ + */ +#define HAL_UART_ERROR_NONE (0x00000000U) /*!< No error */ +#define HAL_UART_ERROR_PE (0x00000001U) /*!< Parity error */ +#define HAL_UART_ERROR_NE (0x00000002U) /*!< Noise error */ +#define HAL_UART_ERROR_FE (0x00000004U) /*!< Frame error */ +#define HAL_UART_ERROR_ORE (0x00000008U) /*!< Overrun error */ +#define HAL_UART_ERROR_DMA (0x00000010U) /*!< DMA transfer error */ +#define HAL_UART_ERROR_RTO (0x00000020U) /*!< Receiver Timeout error */ + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) +#define HAL_UART_ERROR_INVALID_CALLBACK (0x00000040U) /*!< Invalid Callback error */ +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ +/** + * @} + */ + +/** @defgroup UART_Stop_Bits UART Number of Stop Bits + * @{ + */ +#define UART_STOPBITS_0_5 USART_CR2_STOP_0 /*!< UART frame with 0.5 stop bit */ +#define UART_STOPBITS_1 0x00000000U /*!< UART frame with 1 stop bit */ +#define UART_STOPBITS_1_5 (USART_CR2_STOP_0 | USART_CR2_STOP_1) /*!< UART frame with 1.5 stop bits */ +#define UART_STOPBITS_2 USART_CR2_STOP_1 /*!< UART frame with 2 stop bits */ +/** + * @} + */ + +/** @defgroup UART_Parity UART Parity + * @{ + */ +#define UART_PARITY_NONE 0x00000000U /*!< No parity */ +#define UART_PARITY_EVEN USART_CR1_PCE /*!< Even parity */ +#define UART_PARITY_ODD (USART_CR1_PCE | USART_CR1_PS) /*!< Odd parity */ +/** + * @} + */ + +/** @defgroup UART_Hardware_Flow_Control UART Hardware Flow Control + * @{ + */ +#define UART_HWCONTROL_NONE 0x00000000U /*!< No hardware control */ +#define UART_HWCONTROL_RTS USART_CR3_RTSE /*!< Request To Send */ +#define UART_HWCONTROL_CTS USART_CR3_CTSE /*!< Clear To Send */ +#define UART_HWCONTROL_RTS_CTS (USART_CR3_RTSE | USART_CR3_CTSE) /*!< Request and Clear To Send */ +/** + * @} + */ + +/** @defgroup UART_Mode UART Transfer Mode + * @{ + */ +#define UART_MODE_RX USART_CR1_RE /*!< RX mode */ +#define UART_MODE_TX USART_CR1_TE /*!< TX mode */ +#define UART_MODE_TX_RX (USART_CR1_TE |USART_CR1_RE) /*!< RX and TX mode */ +/** + * @} + */ + +/** @defgroup UART_State UART State + * @{ + */ +#define UART_STATE_DISABLE 0x00000000U /*!< UART disabled */ +#define UART_STATE_ENABLE USART_CR1_UE /*!< UART enabled */ +/** + * @} + */ + +/** @defgroup UART_Over_Sampling UART Over Sampling + * @{ + */ +#define UART_OVERSAMPLING_16 0x00000000U /*!< Oversampling by 16 */ +#define UART_OVERSAMPLING_8 USART_CR1_OVER8 /*!< Oversampling by 8 */ +/** + * @} + */ + +/** @defgroup UART_OneBit_Sampling UART One Bit Sampling Method + * @{ + */ +#define UART_ONE_BIT_SAMPLE_DISABLE 0x00000000U /*!< One-bit sampling disable */ +#define UART_ONE_BIT_SAMPLE_ENABLE USART_CR3_ONEBIT /*!< One-bit sampling enable */ +/** + * @} + */ + +#if defined(USART_PRESC_PRESCALER) +/** @defgroup UART_ClockPrescaler UART Clock Prescaler + * @{ + */ +#define UART_PRESCALER_DIV1 0x00000000U /*!< fclk_pres = fclk */ +#define UART_PRESCALER_DIV2 0x00000001U /*!< fclk_pres = fclk/2 */ +#define UART_PRESCALER_DIV4 0x00000002U /*!< fclk_pres = fclk/4 */ +#define UART_PRESCALER_DIV6 0x00000003U /*!< fclk_pres = fclk/6 */ +#define UART_PRESCALER_DIV8 0x00000004U /*!< fclk_pres = fclk/8 */ +#define UART_PRESCALER_DIV10 0x00000005U /*!< fclk_pres = fclk/10 */ +#define UART_PRESCALER_DIV12 0x00000006U /*!< fclk_pres = fclk/12 */ +#define UART_PRESCALER_DIV16 0x00000007U /*!< fclk_pres = fclk/16 */ +#define UART_PRESCALER_DIV32 0x00000008U /*!< fclk_pres = fclk/32 */ +#define UART_PRESCALER_DIV64 0x00000009U /*!< fclk_pres = fclk/64 */ +#define UART_PRESCALER_DIV128 0x0000000AU /*!< fclk_pres = fclk/128 */ +#define UART_PRESCALER_DIV256 0x0000000BU /*!< fclk_pres = fclk/256 */ +/** + * @} + */ + +#endif /* USART_PRESC_PRESCALER */ +/** @defgroup UART_AutoBaud_Rate_Mode UART Advanced Feature AutoBaud Rate Mode + * @{ + */ +#define UART_ADVFEATURE_AUTOBAUDRATE_ONSTARTBIT 0x00000000U /*!< Auto Baud rate detection + on start bit */ +#define UART_ADVFEATURE_AUTOBAUDRATE_ONFALLINGEDGE USART_CR2_ABRMODE_0 /*!< Auto Baud rate detection + on falling edge */ +#define UART_ADVFEATURE_AUTOBAUDRATE_ON0X7FFRAME USART_CR2_ABRMODE_1 /*!< Auto Baud rate detection + on 0x7F frame detection */ +#define UART_ADVFEATURE_AUTOBAUDRATE_ON0X55FRAME USART_CR2_ABRMODE /*!< Auto Baud rate detection + on 0x55 frame detection */ +/** + * @} + */ + +/** @defgroup UART_Receiver_Timeout UART Receiver Timeout + * @{ + */ +#define UART_RECEIVER_TIMEOUT_DISABLE 0x00000000U /*!< UART Receiver Timeout disable */ +#define UART_RECEIVER_TIMEOUT_ENABLE USART_CR2_RTOEN /*!< UART Receiver Timeout enable */ +/** + * @} + */ + +/** @defgroup UART_LIN UART Local Interconnection Network mode + * @{ + */ +#define UART_LIN_DISABLE 0x00000000U /*!< Local Interconnect Network disable */ +#define UART_LIN_ENABLE USART_CR2_LINEN /*!< Local Interconnect Network enable */ +/** + * @} + */ + +/** @defgroup UART_LIN_Break_Detection UART LIN Break Detection + * @{ + */ +#define UART_LINBREAKDETECTLENGTH_10B 0x00000000U /*!< LIN 10-bit break detection length */ +#define UART_LINBREAKDETECTLENGTH_11B USART_CR2_LBDL /*!< LIN 11-bit break detection length */ +/** + * @} + */ + +/** @defgroup UART_DMA_Tx UART DMA Tx + * @{ + */ +#define UART_DMA_TX_DISABLE 0x00000000U /*!< UART DMA TX disabled */ +#define UART_DMA_TX_ENABLE USART_CR3_DMAT /*!< UART DMA TX enabled */ +/** + * @} + */ + +/** @defgroup UART_DMA_Rx UART DMA Rx + * @{ + */ +#define UART_DMA_RX_DISABLE 0x00000000U /*!< UART DMA RX disabled */ +#define UART_DMA_RX_ENABLE USART_CR3_DMAR /*!< UART DMA RX enabled */ +/** + * @} + */ + +/** @defgroup UART_Half_Duplex_Selection UART Half Duplex Selection + * @{ + */ +#define UART_HALF_DUPLEX_DISABLE 0x00000000U /*!< UART half-duplex disabled */ +#define UART_HALF_DUPLEX_ENABLE USART_CR3_HDSEL /*!< UART half-duplex enabled */ +/** + * @} + */ + +/** @defgroup UART_WakeUp_Methods UART WakeUp Methods + * @{ + */ +#define UART_WAKEUPMETHOD_IDLELINE 0x00000000U /*!< UART wake-up on idle line */ +#define UART_WAKEUPMETHOD_ADDRESSMARK USART_CR1_WAKE /*!< UART wake-up on address mark */ +/** + * @} + */ + +/** @defgroup UART_Request_Parameters UART Request Parameters + * @{ + */ +#define UART_AUTOBAUD_REQUEST USART_RQR_ABRRQ /*!< Auto-Baud Rate Request */ +#define UART_SENDBREAK_REQUEST USART_RQR_SBKRQ /*!< Send Break Request */ +#define UART_MUTE_MODE_REQUEST USART_RQR_MMRQ /*!< Mute Mode Request */ +#define UART_RXDATA_FLUSH_REQUEST USART_RQR_RXFRQ /*!< Receive Data flush Request */ +#define UART_TXDATA_FLUSH_REQUEST USART_RQR_TXFRQ /*!< Transmit data flush Request */ +/** + * @} + */ + +/** @defgroup UART_Advanced_Features_Initialization_Type UART Advanced Feature Initialization Type + * @{ + */ +#define UART_ADVFEATURE_NO_INIT 0x00000000U /*!< No advanced feature initialization */ +#define UART_ADVFEATURE_TXINVERT_INIT 0x00000001U /*!< TX pin active level inversion */ +#define UART_ADVFEATURE_RXINVERT_INIT 0x00000002U /*!< RX pin active level inversion */ +#define UART_ADVFEATURE_DATAINVERT_INIT 0x00000004U /*!< Binary data inversion */ +#define UART_ADVFEATURE_SWAP_INIT 0x00000008U /*!< TX/RX pins swap */ +#define UART_ADVFEATURE_RXOVERRUNDISABLE_INIT 0x00000010U /*!< RX overrun disable */ +#define UART_ADVFEATURE_DMADISABLEONERROR_INIT 0x00000020U /*!< DMA disable on Reception Error */ +#define UART_ADVFEATURE_AUTOBAUDRATE_INIT 0x00000040U /*!< Auto Baud rate detection initialization */ +#define UART_ADVFEATURE_MSBFIRST_INIT 0x00000080U /*!< Most significant bit sent/received first */ +/** + * @} + */ + +/** @defgroup UART_Tx_Inv UART Advanced Feature TX Pin Active Level Inversion + * @{ + */ +#define UART_ADVFEATURE_TXINV_DISABLE 0x00000000U /*!< TX pin active level inversion disable */ +#define UART_ADVFEATURE_TXINV_ENABLE USART_CR2_TXINV /*!< TX pin active level inversion enable */ +/** + * @} + */ + +/** @defgroup UART_Rx_Inv UART Advanced Feature RX Pin Active Level Inversion + * @{ + */ +#define UART_ADVFEATURE_RXINV_DISABLE 0x00000000U /*!< RX pin active level inversion disable */ +#define UART_ADVFEATURE_RXINV_ENABLE USART_CR2_RXINV /*!< RX pin active level inversion enable */ +/** + * @} + */ + +/** @defgroup UART_Data_Inv UART Advanced Feature Binary Data Inversion + * @{ + */ +#define UART_ADVFEATURE_DATAINV_DISABLE 0x00000000U /*!< Binary data inversion disable */ +#define UART_ADVFEATURE_DATAINV_ENABLE USART_CR2_DATAINV /*!< Binary data inversion enable */ +/** + * @} + */ + +/** @defgroup UART_Rx_Tx_Swap UART Advanced Feature RX TX Pins Swap + * @{ + */ +#define UART_ADVFEATURE_SWAP_DISABLE 0x00000000U /*!< TX/RX pins swap disable */ +#define UART_ADVFEATURE_SWAP_ENABLE USART_CR2_SWAP /*!< TX/RX pins swap enable */ +/** + * @} + */ + +/** @defgroup UART_Overrun_Disable UART Advanced Feature Overrun Disable + * @{ + */ +#define UART_ADVFEATURE_OVERRUN_ENABLE 0x00000000U /*!< RX overrun enable */ +#define UART_ADVFEATURE_OVERRUN_DISABLE USART_CR3_OVRDIS /*!< RX overrun disable */ +/** + * @} + */ + +/** @defgroup UART_AutoBaudRate_Enable UART Advanced Feature Auto BaudRate Enable + * @{ + */ +#define UART_ADVFEATURE_AUTOBAUDRATE_DISABLE 0x00000000U /*!< RX Auto Baud rate detection enable */ +#define UART_ADVFEATURE_AUTOBAUDRATE_ENABLE USART_CR2_ABREN /*!< RX Auto Baud rate detection disable */ +/** + * @} + */ + +/** @defgroup UART_DMA_Disable_on_Rx_Error UART Advanced Feature DMA Disable On Rx Error + * @{ + */ +#define UART_ADVFEATURE_DMA_ENABLEONRXERROR 0x00000000U /*!< DMA enable on Reception Error */ +#define UART_ADVFEATURE_DMA_DISABLEONRXERROR USART_CR3_DDRE /*!< DMA disable on Reception Error */ +/** + * @} + */ + +/** @defgroup UART_MSB_First UART Advanced Feature MSB First + * @{ + */ +#define UART_ADVFEATURE_MSBFIRST_DISABLE 0x00000000U /*!< Most significant bit sent/received + first disable */ +#define UART_ADVFEATURE_MSBFIRST_ENABLE USART_CR2_MSBFIRST /*!< Most significant bit sent/received + first enable */ +/** + * @} + */ + +/** @defgroup UART_Stop_Mode_Enable UART Advanced Feature Stop Mode Enable + * @{ + */ +#define UART_ADVFEATURE_STOPMODE_DISABLE 0x00000000U /*!< UART stop mode disable */ +#define UART_ADVFEATURE_STOPMODE_ENABLE USART_CR1_UESM /*!< UART stop mode enable */ +/** + * @} + */ + +/** @defgroup UART_Mute_Mode UART Advanced Feature Mute Mode Enable + * @{ + */ +#define UART_ADVFEATURE_MUTEMODE_DISABLE 0x00000000U /*!< UART mute mode disable */ +#define UART_ADVFEATURE_MUTEMODE_ENABLE USART_CR1_MME /*!< UART mute mode enable */ +/** + * @} + */ + +/** @defgroup UART_CR2_ADDRESS_LSB_POS UART Address-matching LSB Position In CR2 Register + * @{ + */ +#define UART_CR2_ADDRESS_LSB_POS 24U /*!< UART address-matching LSB position in CR2 register */ +/** + * @} + */ + +/** @defgroup UART_WakeUp_from_Stop_Selection UART WakeUp From Stop Selection + * @{ + */ +#define UART_WAKEUP_ON_ADDRESS 0x00000000U /*!< UART wake-up on address */ +#define UART_WAKEUP_ON_STARTBIT USART_CR3_WUS_1 /*!< UART wake-up on start bit */ +#define UART_WAKEUP_ON_READDATA_NONEMPTY USART_CR3_WUS /*!< UART wake-up on receive data register + not empty or RXFIFO is not empty */ +/** + * @} + */ + +/** @defgroup UART_DriverEnable_Polarity UART DriverEnable Polarity + * @{ + */ +#define UART_DE_POLARITY_HIGH 0x00000000U /*!< Driver enable signal is active high */ +#define UART_DE_POLARITY_LOW USART_CR3_DEP /*!< Driver enable signal is active low */ +/** + * @} + */ + +/** @defgroup UART_CR1_DEAT_ADDRESS_LSB_POS UART Driver Enable Assertion Time LSB Position In CR1 Register + * @{ + */ +#define UART_CR1_DEAT_ADDRESS_LSB_POS 21U /*!< UART Driver Enable assertion time LSB + position in CR1 register */ +/** + * @} + */ + +/** @defgroup UART_CR1_DEDT_ADDRESS_LSB_POS UART Driver Enable DeAssertion Time LSB Position In CR1 Register + * @{ + */ +#define UART_CR1_DEDT_ADDRESS_LSB_POS 16U /*!< UART Driver Enable de-assertion time LSB + position in CR1 register */ +/** + * @} + */ + +/** @defgroup UART_Interruption_Mask UART Interruptions Flag Mask + * @{ + */ +#define UART_IT_MASK 0x001FU /*!< UART interruptions flags mask */ +/** + * @} + */ + +/** @defgroup UART_TimeOut_Value UART polling-based communications time-out value + * @{ + */ +#define HAL_UART_TIMEOUT_VALUE 0x1FFFFFFU /*!< UART polling-based communications time-out value */ +/** + * @} + */ + +/** @defgroup UART_Flags UART Status Flags + * Elements values convention: 0xXXXX + * - 0xXXXX : Flag mask in the ISR register + * @{ + */ +#if defined(USART_CR1_FIFOEN) +#define UART_FLAG_TXFT USART_ISR_TXFT /*!< UART TXFIFO threshold flag */ +#define UART_FLAG_RXFT USART_ISR_RXFT /*!< UART RXFIFO threshold flag */ +#define UART_FLAG_RXFF USART_ISR_RXFF /*!< UART RXFIFO Full flag */ +#define UART_FLAG_TXFE USART_ISR_TXFE /*!< UART TXFIFO Empty flag */ +#endif /* USART_CR1_FIFOEN */ +#define UART_FLAG_REACK USART_ISR_REACK /*!< UART receive enable acknowledge flag */ +#define UART_FLAG_TEACK USART_ISR_TEACK /*!< UART transmit enable acknowledge flag */ +#define UART_FLAG_WUF USART_ISR_WUF /*!< UART wake-up from stop mode flag */ +#define UART_FLAG_RWU USART_ISR_RWU /*!< UART receiver wake-up from mute mode flag */ +#define UART_FLAG_SBKF USART_ISR_SBKF /*!< UART send break flag */ +#define UART_FLAG_CMF USART_ISR_CMF /*!< UART character match flag */ +#define UART_FLAG_BUSY USART_ISR_BUSY /*!< UART busy flag */ +#define UART_FLAG_ABRF USART_ISR_ABRF /*!< UART auto Baud rate flag */ +#define UART_FLAG_ABRE USART_ISR_ABRE /*!< UART auto Baud rate error */ +#define UART_FLAG_RTOF USART_ISR_RTOF /*!< UART receiver timeout flag */ +#define UART_FLAG_CTS USART_ISR_CTS /*!< UART clear to send flag */ +#define UART_FLAG_CTSIF USART_ISR_CTSIF /*!< UART clear to send interrupt flag */ +#define UART_FLAG_LBDF USART_ISR_LBDF /*!< UART LIN break detection flag */ +#if defined(USART_CR1_FIFOEN) +#define UART_FLAG_TXE USART_ISR_TXE_TXFNF /*!< UART transmit data register empty */ +#define UART_FLAG_TXFNF USART_ISR_TXE_TXFNF /*!< UART TXFIFO not full */ +#else +#define UART_FLAG_TXE USART_ISR_TXE /*!< UART transmit data register empty */ +#endif /* USART_CR1_FIFOEN */ +#define UART_FLAG_TC USART_ISR_TC /*!< UART transmission complete */ +#if defined(USART_CR1_FIFOEN) +#define UART_FLAG_RXNE USART_ISR_RXNE_RXFNE /*!< UART read data register not empty */ +#define UART_FLAG_RXFNE USART_ISR_RXNE_RXFNE /*!< UART RXFIFO not empty */ +#else +#define UART_FLAG_RXNE USART_ISR_RXNE /*!< UART read data register not empty */ +#endif /* USART_CR1_FIFOEN */ +#define UART_FLAG_IDLE USART_ISR_IDLE /*!< UART idle flag */ +#define UART_FLAG_ORE USART_ISR_ORE /*!< UART overrun error */ +#define UART_FLAG_NE USART_ISR_NE /*!< UART noise error */ +#define UART_FLAG_FE USART_ISR_FE /*!< UART frame error */ +#define UART_FLAG_PE USART_ISR_PE /*!< UART parity error */ +/** + * @} + */ + +/** @defgroup UART_Interrupt_definition UART Interrupts Definition + * Elements values convention: 000ZZZZZ0XXYYYYYb + * - YYYYY : Interrupt source position in the XX register (5bits) + * - XX : Interrupt source register (2bits) + * - 01: CR1 register + * - 10: CR2 register + * - 11: CR3 register + * - ZZZZZ : Flag position in the ISR register(5bits) + * Elements values convention: 000000000XXYYYYYb + * - YYYYY : Interrupt source position in the XX register (5bits) + * - XX : Interrupt source register (2bits) + * - 01: CR1 register + * - 10: CR2 register + * - 11: CR3 register + * Elements values convention: 0000ZZZZ00000000b + * - ZZZZ : Flag position in the ISR register(4bits) + * @{ + */ +#define UART_IT_PE 0x0028U /*!< UART parity error interruption */ +#define UART_IT_TXE 0x0727U /*!< UART transmit data register empty interruption */ +#if defined(USART_CR1_FIFOEN) +#define UART_IT_TXFNF 0x0727U /*!< UART TX FIFO not full interruption */ +#endif /* USART_CR1_FIFOEN */ +#define UART_IT_TC 0x0626U /*!< UART transmission complete interruption */ +#define UART_IT_RXNE 0x0525U /*!< UART read data register not empty interruption */ +#if defined(USART_CR1_FIFOEN) +#define UART_IT_RXFNE 0x0525U /*!< UART RXFIFO not empty interruption */ +#endif /* USART_CR1_FIFOEN */ +#define UART_IT_IDLE 0x0424U /*!< UART idle interruption */ +#define UART_IT_LBD 0x0846U /*!< UART LIN break detection interruption */ +#define UART_IT_CTS 0x096AU /*!< UART CTS interruption */ +#define UART_IT_CM 0x112EU /*!< UART character match interruption */ +#define UART_IT_WUF 0x1476U /*!< UART wake-up from stop mode interruption */ +#if defined(USART_CR1_FIFOEN) +#define UART_IT_RXFF 0x183FU /*!< UART RXFIFO full interruption */ +#define UART_IT_TXFE 0x173EU /*!< UART TXFIFO empty interruption */ +#define UART_IT_RXFT 0x1A7CU /*!< UART RXFIFO threshold reached interruption */ +#define UART_IT_TXFT 0x1B77U /*!< UART TXFIFO threshold reached interruption */ +#endif /* USART_CR1_FIFOEN */ +#define UART_IT_RTO 0x0B3AU /*!< UART receiver timeout interruption */ + +#define UART_IT_ERR 0x0060U /*!< UART error interruption */ + +#define UART_IT_ORE 0x0300U /*!< UART overrun error interruption */ +#define UART_IT_NE 0x0200U /*!< UART noise error interruption */ +#define UART_IT_FE 0x0100U /*!< UART frame error interruption */ +/** + * @} + */ + +/** @defgroup UART_IT_CLEAR_Flags UART Interruption Clear Flags + * @{ + */ +#define UART_CLEAR_PEF USART_ICR_PECF /*!< Parity Error Clear Flag */ +#define UART_CLEAR_FEF USART_ICR_FECF /*!< Framing Error Clear Flag */ +#define UART_CLEAR_NEF USART_ICR_NECF /*!< Noise Error detected Clear Flag */ +#define UART_CLEAR_OREF USART_ICR_ORECF /*!< Overrun Error Clear Flag */ +#define UART_CLEAR_IDLEF USART_ICR_IDLECF /*!< IDLE line detected Clear Flag */ +#if defined(USART_CR1_FIFOEN) +#define UART_CLEAR_TXFECF USART_ICR_TXFECF /*!< TXFIFO empty clear flag */ +#endif /* USART_CR1_FIFOEN */ +#define UART_CLEAR_TCF USART_ICR_TCCF /*!< Transmission Complete Clear Flag */ +#define UART_CLEAR_LBDF USART_ICR_LBDCF /*!< LIN Break Detection Clear Flag */ +#define UART_CLEAR_CTSF USART_ICR_CTSCF /*!< CTS Interrupt Clear Flag */ +#define UART_CLEAR_CMF USART_ICR_CMCF /*!< Character Match Clear Flag */ +#define UART_CLEAR_WUF USART_ICR_WUCF /*!< Wake Up from stop mode Clear Flag */ +#define UART_CLEAR_RTOF USART_ICR_RTOCF /*!< UART receiver timeout clear flag */ +/** + * @} + */ + +/** @defgroup UART_Reception_Type_Values UART Reception type values + * @{ + */ +#define HAL_UART_RECEPTION_STANDARD (0x00000000U) /*!< Standard reception */ +#define HAL_UART_RECEPTION_TOIDLE (0x00000001U) /*!< Reception till completion or IDLE event */ +#define HAL_UART_RECEPTION_TORTO (0x00000002U) /*!< Reception till completion or RTO event */ +#define HAL_UART_RECEPTION_TOCHARMATCH (0x00000003U) /*!< Reception till completion or CM event */ +/** + * @} + */ + +/** @defgroup UART_RxEvent_Type_Values UART RxEvent type values + * @{ + */ +#define HAL_UART_RXEVENT_TC (0x00000000U) /*!< RxEvent linked to Transfer Complete event */ +#define HAL_UART_RXEVENT_HT (0x00000001U) /*!< RxEvent linked to Half Transfer event */ +#define HAL_UART_RXEVENT_IDLE (0x00000002U) /*!< RxEvent linked to IDLE event */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ +/** @defgroup UART_Exported_Macros UART Exported Macros + * @{ + */ + +/** @brief Reset UART handle states. + * @param __HANDLE__ UART handle. + * @retval None + */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) +#define __HAL_UART_RESET_HANDLE_STATE(__HANDLE__) do{ \ + (__HANDLE__)->gState = HAL_UART_STATE_RESET; \ + (__HANDLE__)->RxState = HAL_UART_STATE_RESET; \ + (__HANDLE__)->MspInitCallback = NULL; \ + (__HANDLE__)->MspDeInitCallback = NULL; \ + } while(0U) +#else +#define __HAL_UART_RESET_HANDLE_STATE(__HANDLE__) do{ \ + (__HANDLE__)->gState = HAL_UART_STATE_RESET; \ + (__HANDLE__)->RxState = HAL_UART_STATE_RESET; \ + } while(0U) +#endif /*USE_HAL_UART_REGISTER_CALLBACKS */ + +/** @brief Flush the UART Data registers. + * @param __HANDLE__ specifies the UART Handle. + * @retval None + */ +#define __HAL_UART_FLUSH_DRREGISTER(__HANDLE__) \ + do{ \ + SET_BIT((__HANDLE__)->Instance->RQR, UART_RXDATA_FLUSH_REQUEST); \ + SET_BIT((__HANDLE__)->Instance->RQR, UART_TXDATA_FLUSH_REQUEST); \ + } while(0U) + +/** @brief Clear the specified UART pending flag. + * @param __HANDLE__ specifies the UART Handle. + * @param __FLAG__ specifies the flag to check. + * This parameter can be any combination of the following values: + * @arg @ref UART_CLEAR_PEF Parity Error Clear Flag + * @arg @ref UART_CLEAR_FEF Framing Error Clear Flag + * @arg @ref UART_CLEAR_NEF Noise detected Clear Flag + * @arg @ref UART_CLEAR_OREF Overrun Error Clear Flag + * @arg @ref UART_CLEAR_IDLEF IDLE line detected Clear Flag + * @arg @ref UART_CLEAR_TXFECF TXFIFO empty clear Flag + * @arg @ref UART_CLEAR_TCF Transmission Complete Clear Flag + * @arg @ref UART_CLEAR_RTOF Receiver Timeout clear flag + * @arg @ref UART_CLEAR_LBDF LIN Break Detection Clear Flag + * @arg @ref UART_CLEAR_CTSF CTS Interrupt Clear Flag + * @arg @ref UART_CLEAR_CMF Character Match Clear Flag + * @arg @ref UART_CLEAR_WUF Wake Up from stop mode Clear Flag + * @retval None + */ +#define __HAL_UART_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ICR = (__FLAG__)) + +/** @brief Clear the UART PE pending flag. + * @param __HANDLE__ specifies the UART Handle. + * @retval None + */ +#define __HAL_UART_CLEAR_PEFLAG(__HANDLE__) __HAL_UART_CLEAR_FLAG((__HANDLE__), UART_CLEAR_PEF) + +/** @brief Clear the UART FE pending flag. + * @param __HANDLE__ specifies the UART Handle. + * @retval None + */ +#define __HAL_UART_CLEAR_FEFLAG(__HANDLE__) __HAL_UART_CLEAR_FLAG((__HANDLE__), UART_CLEAR_FEF) + +/** @brief Clear the UART NE pending flag. + * @param __HANDLE__ specifies the UART Handle. + * @retval None + */ +#define __HAL_UART_CLEAR_NEFLAG(__HANDLE__) __HAL_UART_CLEAR_FLAG((__HANDLE__), UART_CLEAR_NEF) + +/** @brief Clear the UART ORE pending flag. + * @param __HANDLE__ specifies the UART Handle. + * @retval None + */ +#define __HAL_UART_CLEAR_OREFLAG(__HANDLE__) __HAL_UART_CLEAR_FLAG((__HANDLE__), UART_CLEAR_OREF) + +/** @brief Clear the UART IDLE pending flag. + * @param __HANDLE__ specifies the UART Handle. + * @retval None + */ +#define __HAL_UART_CLEAR_IDLEFLAG(__HANDLE__) __HAL_UART_CLEAR_FLAG((__HANDLE__), UART_CLEAR_IDLEF) + +#if defined(USART_CR1_FIFOEN) +/** @brief Clear the UART TX FIFO empty clear flag. + * @param __HANDLE__ specifies the UART Handle. + * @retval None + */ +#define __HAL_UART_CLEAR_TXFECF(__HANDLE__) __HAL_UART_CLEAR_FLAG((__HANDLE__), UART_CLEAR_TXFECF) +#endif /* USART_CR1_FIFOEN */ + +/** @brief Check whether the specified UART flag is set or not. + * @param __HANDLE__ specifies the UART Handle. + * @param __FLAG__ specifies the flag to check. + * This parameter can be one of the following values: + * @arg @ref UART_FLAG_TXFT TXFIFO threshold flag + * @arg @ref UART_FLAG_RXFT RXFIFO threshold flag + * @arg @ref UART_FLAG_RXFF RXFIFO Full flag + * @arg @ref UART_FLAG_TXFE TXFIFO Empty flag + * @arg @ref UART_FLAG_REACK Receive enable acknowledge flag + * @arg @ref UART_FLAG_TEACK Transmit enable acknowledge flag + * @arg @ref UART_FLAG_WUF Wake up from stop mode flag + * @arg @ref UART_FLAG_RWU Receiver wake up flag (if the UART in mute mode) + * @arg @ref UART_FLAG_SBKF Send Break flag + * @arg @ref UART_FLAG_CMF Character match flag + * @arg @ref UART_FLAG_BUSY Busy flag + * @arg @ref UART_FLAG_ABRF Auto Baud rate detection flag + * @arg @ref UART_FLAG_ABRE Auto Baud rate detection error flag + * @arg @ref UART_FLAG_CTS CTS Change flag + * @arg @ref UART_FLAG_LBDF LIN Break detection flag + * @arg @ref UART_FLAG_TXE Transmit data register empty flag + * @arg @ref UART_FLAG_TXFNF UART TXFIFO not full flag + * @arg @ref UART_FLAG_TC Transmission Complete flag + * @arg @ref UART_FLAG_RXNE Receive data register not empty flag + * @arg @ref UART_FLAG_RXFNE UART RXFIFO not empty flag + * @arg @ref UART_FLAG_RTOF Receiver Timeout flag + * @arg @ref UART_FLAG_IDLE Idle Line detection flag + * @arg @ref UART_FLAG_ORE Overrun Error flag + * @arg @ref UART_FLAG_NE Noise Error flag + * @arg @ref UART_FLAG_FE Framing Error flag + * @arg @ref UART_FLAG_PE Parity Error flag + * @retval The new state of __FLAG__ (TRUE or FALSE). + */ +#define __HAL_UART_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->ISR & (__FLAG__)) == (__FLAG__)) + +/** @brief Enable the specified UART interrupt. + * @param __HANDLE__ specifies the UART Handle. + * @param __INTERRUPT__ specifies the UART interrupt source to enable. + * This parameter can be one of the following values: + * @arg @ref UART_IT_RXFF RXFIFO Full interrupt + * @arg @ref UART_IT_TXFE TXFIFO Empty interrupt + * @arg @ref UART_IT_RXFT RXFIFO threshold interrupt + * @arg @ref UART_IT_TXFT TXFIFO threshold interrupt + * @arg @ref UART_IT_WUF Wakeup from stop mode interrupt + * @arg @ref UART_IT_CM Character match interrupt + * @arg @ref UART_IT_CTS CTS change interrupt + * @arg @ref UART_IT_LBD LIN Break detection interrupt + * @arg @ref UART_IT_TXE Transmit Data Register empty interrupt + * @arg @ref UART_IT_TXFNF TX FIFO not full interrupt + * @arg @ref UART_IT_TC Transmission complete interrupt + * @arg @ref UART_IT_RXNE Receive Data register not empty interrupt + * @arg @ref UART_IT_RXFNE RXFIFO not empty interrupt + * @arg @ref UART_IT_RTO Receive Timeout interrupt + * @arg @ref UART_IT_IDLE Idle line detection interrupt + * @arg @ref UART_IT_PE Parity Error interrupt + * @arg @ref UART_IT_ERR Error interrupt (frame error, noise error, overrun error) + * @retval None + */ +#define __HAL_UART_ENABLE_IT(__HANDLE__, __INTERRUPT__) (\ + ((((uint8_t)(__INTERRUPT__)) >> 5U) == 1U)?\ + ((__HANDLE__)->Instance->CR1 |= (1U <<\ + ((__INTERRUPT__) & UART_IT_MASK))): \ + ((((uint8_t)(__INTERRUPT__)) >> 5U) == 2U)?\ + ((__HANDLE__)->Instance->CR2 |= (1U <<\ + ((__INTERRUPT__) & UART_IT_MASK))): \ + ((__HANDLE__)->Instance->CR3 |= (1U <<\ + ((__INTERRUPT__) & UART_IT_MASK)))) + +/** @brief Disable the specified UART interrupt. + * @param __HANDLE__ specifies the UART Handle. + * @param __INTERRUPT__ specifies the UART interrupt source to disable. + * This parameter can be one of the following values: + * @arg @ref UART_IT_RXFF RXFIFO Full interrupt + * @arg @ref UART_IT_TXFE TXFIFO Empty interrupt + * @arg @ref UART_IT_RXFT RXFIFO threshold interrupt + * @arg @ref UART_IT_TXFT TXFIFO threshold interrupt + * @arg @ref UART_IT_WUF Wakeup from stop mode interrupt + * @arg @ref UART_IT_CM Character match interrupt + * @arg @ref UART_IT_CTS CTS change interrupt + * @arg @ref UART_IT_LBD LIN Break detection interrupt + * @arg @ref UART_IT_TXE Transmit Data Register empty interrupt + * @arg @ref UART_IT_TXFNF TX FIFO not full interrupt + * @arg @ref UART_IT_TC Transmission complete interrupt + * @arg @ref UART_IT_RXNE Receive Data register not empty interrupt + * @arg @ref UART_IT_RXFNE RXFIFO not empty interrupt + * @arg @ref UART_IT_RTO Receive Timeout interrupt + * @arg @ref UART_IT_IDLE Idle line detection interrupt + * @arg @ref UART_IT_PE Parity Error interrupt + * @arg @ref UART_IT_ERR Error interrupt (Frame error, noise error, overrun error) + * @retval None + */ +#define __HAL_UART_DISABLE_IT(__HANDLE__, __INTERRUPT__) (\ + ((((uint8_t)(__INTERRUPT__)) >> 5U) == 1U)?\ + ((__HANDLE__)->Instance->CR1 &= ~ (1U <<\ + ((__INTERRUPT__) & UART_IT_MASK))): \ + ((((uint8_t)(__INTERRUPT__)) >> 5U) == 2U)?\ + ((__HANDLE__)->Instance->CR2 &= ~ (1U <<\ + ((__INTERRUPT__) & UART_IT_MASK))): \ + ((__HANDLE__)->Instance->CR3 &= ~ (1U <<\ + ((__INTERRUPT__) & UART_IT_MASK)))) + +/** @brief Check whether the specified UART interrupt has occurred or not. + * @param __HANDLE__ specifies the UART Handle. + * @param __INTERRUPT__ specifies the UART interrupt to check. + * This parameter can be one of the following values: + * @arg @ref UART_IT_RXFF RXFIFO Full interrupt + * @arg @ref UART_IT_TXFE TXFIFO Empty interrupt + * @arg @ref UART_IT_RXFT RXFIFO threshold interrupt + * @arg @ref UART_IT_TXFT TXFIFO threshold interrupt + * @arg @ref UART_IT_WUF Wakeup from stop mode interrupt + * @arg @ref UART_IT_CM Character match interrupt + * @arg @ref UART_IT_CTS CTS change interrupt + * @arg @ref UART_IT_LBD LIN Break detection interrupt + * @arg @ref UART_IT_TXE Transmit Data Register empty interrupt + * @arg @ref UART_IT_TXFNF TX FIFO not full interrupt + * @arg @ref UART_IT_TC Transmission complete interrupt + * @arg @ref UART_IT_RXNE Receive Data register not empty interrupt + * @arg @ref UART_IT_RXFNE RXFIFO not empty interrupt + * @arg @ref UART_IT_RTO Receive Timeout interrupt + * @arg @ref UART_IT_IDLE Idle line detection interrupt + * @arg @ref UART_IT_PE Parity Error interrupt + * @arg @ref UART_IT_ERR Error interrupt (Frame error, noise error, overrun error) + * @retval The new state of __INTERRUPT__ (SET or RESET). + */ +#define __HAL_UART_GET_IT(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->ISR\ + & (1U << ((__INTERRUPT__)>> 8U))) != RESET) ? SET : RESET) + +/** @brief Check whether the specified UART interrupt source is enabled or not. + * @param __HANDLE__ specifies the UART Handle. + * @param __INTERRUPT__ specifies the UART interrupt source to check. + * This parameter can be one of the following values: + * @arg @ref UART_IT_RXFF RXFIFO Full interrupt + * @arg @ref UART_IT_TXFE TXFIFO Empty interrupt + * @arg @ref UART_IT_RXFT RXFIFO threshold interrupt + * @arg @ref UART_IT_TXFT TXFIFO threshold interrupt + * @arg @ref UART_IT_WUF Wakeup from stop mode interrupt + * @arg @ref UART_IT_CM Character match interrupt + * @arg @ref UART_IT_CTS CTS change interrupt + * @arg @ref UART_IT_LBD LIN Break detection interrupt + * @arg @ref UART_IT_TXE Transmit Data Register empty interrupt + * @arg @ref UART_IT_TXFNF TX FIFO not full interrupt + * @arg @ref UART_IT_TC Transmission complete interrupt + * @arg @ref UART_IT_RXNE Receive Data register not empty interrupt + * @arg @ref UART_IT_RXFNE RXFIFO not empty interrupt + * @arg @ref UART_IT_RTO Receive Timeout interrupt + * @arg @ref UART_IT_IDLE Idle line detection interrupt + * @arg @ref UART_IT_PE Parity Error interrupt + * @arg @ref UART_IT_ERR Error interrupt (Frame error, noise error, overrun error) + * @retval The new state of __INTERRUPT__ (SET or RESET). + */ +#define __HAL_UART_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((((((uint8_t)(__INTERRUPT__)) >> 5U) == 1U) ?\ + (__HANDLE__)->Instance->CR1 : \ + (((((uint8_t)(__INTERRUPT__)) >> 5U) == 2U) ?\ + (__HANDLE__)->Instance->CR2 : \ + (__HANDLE__)->Instance->CR3)) & (1U <<\ + (((uint16_t)(__INTERRUPT__)) &\ + UART_IT_MASK))) != RESET) ? SET : RESET) + +/** @brief Clear the specified UART ISR flag, in setting the proper ICR register flag. + * @param __HANDLE__ specifies the UART Handle. + * @param __IT_CLEAR__ specifies the interrupt clear register flag that needs to be set + * to clear the corresponding interrupt + * This parameter can be one of the following values: + * @arg @ref UART_CLEAR_PEF Parity Error Clear Flag + * @arg @ref UART_CLEAR_FEF Framing Error Clear Flag + * @arg @ref UART_CLEAR_NEF Noise detected Clear Flag + * @arg @ref UART_CLEAR_OREF Overrun Error Clear Flag + * @arg @ref UART_CLEAR_IDLEF IDLE line detected Clear Flag + * @arg @ref UART_CLEAR_RTOF Receiver timeout clear flag + * @arg @ref UART_CLEAR_TXFECF TXFIFO empty Clear Flag + * @arg @ref UART_CLEAR_TCF Transmission Complete Clear Flag + * @arg @ref UART_CLEAR_LBDF LIN Break Detection Clear Flag + * @arg @ref UART_CLEAR_CTSF CTS Interrupt Clear Flag + * @arg @ref UART_CLEAR_CMF Character Match Clear Flag + * @arg @ref UART_CLEAR_WUF Wake Up from stop mode Clear Flag + * @retval None + */ +#define __HAL_UART_CLEAR_IT(__HANDLE__, __IT_CLEAR__) ((__HANDLE__)->Instance->ICR = (uint32_t)(__IT_CLEAR__)) + +/** @brief Set a specific UART request flag. + * @param __HANDLE__ specifies the UART Handle. + * @param __REQ__ specifies the request flag to set + * This parameter can be one of the following values: + * @arg @ref UART_AUTOBAUD_REQUEST Auto-Baud Rate Request + * @arg @ref UART_SENDBREAK_REQUEST Send Break Request + * @arg @ref UART_MUTE_MODE_REQUEST Mute Mode Request + * @arg @ref UART_RXDATA_FLUSH_REQUEST Receive Data flush Request + * @arg @ref UART_TXDATA_FLUSH_REQUEST Transmit data flush Request + * @retval None + */ +#define __HAL_UART_SEND_REQ(__HANDLE__, __REQ__) ((__HANDLE__)->Instance->RQR |= (uint16_t)(__REQ__)) + +/** @brief Enable the UART one bit sample method. + * @param __HANDLE__ specifies the UART Handle. + * @retval None + */ +#define __HAL_UART_ONE_BIT_SAMPLE_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3|= USART_CR3_ONEBIT) + +/** @brief Disable the UART one bit sample method. + * @param __HANDLE__ specifies the UART Handle. + * @retval None + */ +#define __HAL_UART_ONE_BIT_SAMPLE_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3 &= ~USART_CR3_ONEBIT) + +/** @brief Enable UART. + * @param __HANDLE__ specifies the UART Handle. + * @retval None + */ +#define __HAL_UART_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= USART_CR1_UE) + +/** @brief Disable UART. + * @param __HANDLE__ specifies the UART Handle. + * @retval None + */ +#define __HAL_UART_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= ~USART_CR1_UE) + +/** @brief Enable CTS flow control. + * @note This macro allows to enable CTS hardware flow control for a given UART instance, + * without need to call HAL_UART_Init() function. + * As involving direct access to UART registers, usage of this macro should be fully endorsed by user. + * @note As macro is expected to be used for modifying CTS Hw flow control feature activation, without need + * for USART instance Deinit/Init, following conditions for macro call should be fulfilled : + * - UART instance should have already been initialised (through call of HAL_UART_Init() ) + * - macro could only be called when corresponding UART instance is disabled + * (i.e. __HAL_UART_DISABLE(__HANDLE__)) and should be followed by an Enable + * macro (i.e. __HAL_UART_ENABLE(__HANDLE__)). + * @param __HANDLE__ specifies the UART Handle. + * @retval None + */ +#define __HAL_UART_HWCONTROL_CTS_ENABLE(__HANDLE__) \ + do{ \ + ATOMIC_SET_BIT((__HANDLE__)->Instance->CR3, USART_CR3_CTSE); \ + (__HANDLE__)->Init.HwFlowCtl |= USART_CR3_CTSE; \ + } while(0U) + +/** @brief Disable CTS flow control. + * @note This macro allows to disable CTS hardware flow control for a given UART instance, + * without need to call HAL_UART_Init() function. + * As involving direct access to UART registers, usage of this macro should be fully endorsed by user. + * @note As macro is expected to be used for modifying CTS Hw flow control feature activation, without need + * for USART instance Deinit/Init, following conditions for macro call should be fulfilled : + * - UART instance should have already been initialised (through call of HAL_UART_Init() ) + * - macro could only be called when corresponding UART instance is disabled + * (i.e. __HAL_UART_DISABLE(__HANDLE__)) and should be followed by an Enable + * macro (i.e. __HAL_UART_ENABLE(__HANDLE__)). + * @param __HANDLE__ specifies the UART Handle. + * @retval None + */ +#define __HAL_UART_HWCONTROL_CTS_DISABLE(__HANDLE__) \ + do{ \ + ATOMIC_CLEAR_BIT((__HANDLE__)->Instance->CR3, USART_CR3_CTSE); \ + (__HANDLE__)->Init.HwFlowCtl &= ~(USART_CR3_CTSE); \ + } while(0U) + +/** @brief Enable RTS flow control. + * @note This macro allows to enable RTS hardware flow control for a given UART instance, + * without need to call HAL_UART_Init() function. + * As involving direct access to UART registers, usage of this macro should be fully endorsed by user. + * @note As macro is expected to be used for modifying RTS Hw flow control feature activation, without need + * for USART instance Deinit/Init, following conditions for macro call should be fulfilled : + * - UART instance should have already been initialised (through call of HAL_UART_Init() ) + * - macro could only be called when corresponding UART instance is disabled + * (i.e. __HAL_UART_DISABLE(__HANDLE__)) and should be followed by an Enable + * macro (i.e. __HAL_UART_ENABLE(__HANDLE__)). + * @param __HANDLE__ specifies the UART Handle. + * @retval None + */ +#define __HAL_UART_HWCONTROL_RTS_ENABLE(__HANDLE__) \ + do{ \ + ATOMIC_SET_BIT((__HANDLE__)->Instance->CR3, USART_CR3_RTSE); \ + (__HANDLE__)->Init.HwFlowCtl |= USART_CR3_RTSE; \ + } while(0U) + +/** @brief Disable RTS flow control. + * @note This macro allows to disable RTS hardware flow control for a given UART instance, + * without need to call HAL_UART_Init() function. + * As involving direct access to UART registers, usage of this macro should be fully endorsed by user. + * @note As macro is expected to be used for modifying RTS Hw flow control feature activation, without need + * for USART instance Deinit/Init, following conditions for macro call should be fulfilled : + * - UART instance should have already been initialised (through call of HAL_UART_Init() ) + * - macro could only be called when corresponding UART instance is disabled + * (i.e. __HAL_UART_DISABLE(__HANDLE__)) and should be followed by an Enable + * macro (i.e. __HAL_UART_ENABLE(__HANDLE__)). + * @param __HANDLE__ specifies the UART Handle. + * @retval None + */ +#define __HAL_UART_HWCONTROL_RTS_DISABLE(__HANDLE__) \ + do{ \ + ATOMIC_CLEAR_BIT((__HANDLE__)->Instance->CR3, USART_CR3_RTSE);\ + (__HANDLE__)->Init.HwFlowCtl &= ~(USART_CR3_RTSE); \ + } while(0U) +/** + * @} + */ + +/* Private macros --------------------------------------------------------*/ +/** @defgroup UART_Private_Macros UART Private Macros + * @{ + */ +#if defined(USART_PRESC_PRESCALER) +/** @brief Get UART clock division factor from clock prescaler value. + * @param __CLOCKPRESCALER__ UART prescaler value. + * @retval UART clock division factor + */ +#define UART_GET_DIV_FACTOR(__CLOCKPRESCALER__) \ + (((__CLOCKPRESCALER__) == UART_PRESCALER_DIV1) ? 1U : \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV2) ? 2U : \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV4) ? 4U : \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV6) ? 6U : \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV8) ? 8U : \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV10) ? 10U : \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV12) ? 12U : \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV16) ? 16U : \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV32) ? 32U : \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV64) ? 64U : \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV128) ? 128U : 256U) + +/** @brief BRR division operation to set BRR register with LPUART. + * @param __PCLK__ LPUART clock. + * @param __BAUD__ Baud rate set by the user. + * @param __CLOCKPRESCALER__ UART prescaler value. + * @retval Division result + */ +#define UART_DIV_LPUART(__PCLK__, __BAUD__, __CLOCKPRESCALER__) \ + ((uint32_t)((((((uint64_t)(__PCLK__))/(UARTPrescTable[(__CLOCKPRESCALER__)]))*256U)+ \ + (uint32_t)((__BAUD__)/2U)) / (__BAUD__)) \ + ) + +/** @brief BRR division operation to set BRR register in 8-bit oversampling mode. + * @param __PCLK__ UART clock. + * @param __BAUD__ Baud rate set by the user. + * @param __CLOCKPRESCALER__ UART prescaler value. + * @retval Division result + */ +#define UART_DIV_SAMPLING8(__PCLK__, __BAUD__, __CLOCKPRESCALER__) \ + (((((__PCLK__)/UARTPrescTable[(__CLOCKPRESCALER__)])*2U) + ((__BAUD__)/2U)) / (__BAUD__)) + +/** @brief BRR division operation to set BRR register in 16-bit oversampling mode. + * @param __PCLK__ UART clock. + * @param __BAUD__ Baud rate set by the user. + * @param __CLOCKPRESCALER__ UART prescaler value. + * @retval Division result + */ +#define UART_DIV_SAMPLING16(__PCLK__, __BAUD__, __CLOCKPRESCALER__) \ + ((((__PCLK__)/UARTPrescTable[(__CLOCKPRESCALER__)]) + ((__BAUD__)/2U)) / (__BAUD__)) +#else + +/** @brief BRR division operation to set BRR register with LPUART. + * @param __PCLK__ LPUART clock. + * @param __BAUD__ Baud rate set by the user. + * @retval Division result + */ +#define UART_DIV_LPUART(__PCLK__, __BAUD__) (((((uint64_t)(__PCLK__)*256U)) + ((__BAUD__)/2U)) / (__BAUD__)) + +/** @brief BRR division operation to set BRR register in 8-bit oversampling mode. + * @param __PCLK__ UART clock. + * @param __BAUD__ Baud rate set by the user. + * @retval Division result + */ +#define UART_DIV_SAMPLING8(__PCLK__, __BAUD__) ((((__PCLK__)*2U) + ((__BAUD__)/2U)) / (__BAUD__)) + +/** @brief BRR division operation to set BRR register in 16-bit oversampling mode. + * @param __PCLK__ UART clock. + * @param __BAUD__ Baud rate set by the user. + * @retval Division result + */ +#define UART_DIV_SAMPLING16(__PCLK__, __BAUD__) (((__PCLK__) + ((__BAUD__)/2U)) / (__BAUD__)) +#endif /* USART_PRESC_PRESCALER */ + +/** @brief Check whether or not UART instance is Low Power UART. + * @param __HANDLE__ specifies the UART Handle. + * @retval SET (instance is LPUART) or RESET (instance isn't LPUART) + */ +#define UART_INSTANCE_LOWPOWER(__HANDLE__) (IS_LPUART_INSTANCE((__HANDLE__)->Instance)) + +/** @brief Check UART Baud rate. + * @param __BAUDRATE__ Baudrate specified by the user. + * The maximum Baud Rate is derived from the maximum clock on L4 + * divided by the smallest oversampling used on the USART (i.e. 8) + * (i.e. 120 MHz on STM32L4Rx/L4Sx, 80 Mhz otherwise) + * @retval SET (__BAUDRATE__ is valid) or RESET (__BAUDRATE__ is invalid) + */ +#if defined(STM32L4R5xx) || defined(STM32L4R7xx) || defined(STM32L4R9xx) || defined(STM32L4S5xx) || defined(STM32L4S7xx) || defined(STM32L4S9xx) +#define IS_UART_BAUDRATE(__BAUDRATE__) ((__BAUDRATE__) < 15000001U) +#else +#define IS_UART_BAUDRATE(__BAUDRATE__) ((__BAUDRATE__) < 10000001U) +#endif /* STM32L4R5xx || STM32L4R7xx || STM32L4R9xx || STM32L4S5xx || STM32L4S7xx || STM32L4S9xx */ + +/** @brief Check UART assertion time. + * @param __TIME__ 5-bit value assertion time. + * @retval Test result (TRUE or FALSE). + */ +#define IS_UART_ASSERTIONTIME(__TIME__) ((__TIME__) <= 0x1FU) + +/** @brief Check UART deassertion time. + * @param __TIME__ 5-bit value deassertion time. + * @retval Test result (TRUE or FALSE). + */ +#define IS_UART_DEASSERTIONTIME(__TIME__) ((__TIME__) <= 0x1FU) + +/** + * @brief Ensure that UART frame number of stop bits is valid. + * @param __STOPBITS__ UART frame number of stop bits. + * @retval SET (__STOPBITS__ is valid) or RESET (__STOPBITS__ is invalid) + */ +#define IS_UART_STOPBITS(__STOPBITS__) (((__STOPBITS__) == UART_STOPBITS_0_5) || \ + ((__STOPBITS__) == UART_STOPBITS_1) || \ + ((__STOPBITS__) == UART_STOPBITS_1_5) || \ + ((__STOPBITS__) == UART_STOPBITS_2)) + +/** + * @brief Ensure that LPUART frame number of stop bits is valid. + * @param __STOPBITS__ LPUART frame number of stop bits. + * @retval SET (__STOPBITS__ is valid) or RESET (__STOPBITS__ is invalid) + */ +#define IS_LPUART_STOPBITS(__STOPBITS__) (((__STOPBITS__) == UART_STOPBITS_1) || \ + ((__STOPBITS__) == UART_STOPBITS_2)) + +/** + * @brief Ensure that UART frame parity is valid. + * @param __PARITY__ UART frame parity. + * @retval SET (__PARITY__ is valid) or RESET (__PARITY__ is invalid) + */ +#define IS_UART_PARITY(__PARITY__) (((__PARITY__) == UART_PARITY_NONE) || \ + ((__PARITY__) == UART_PARITY_EVEN) || \ + ((__PARITY__) == UART_PARITY_ODD)) + +/** + * @brief Ensure that UART hardware flow control is valid. + * @param __CONTROL__ UART hardware flow control. + * @retval SET (__CONTROL__ is valid) or RESET (__CONTROL__ is invalid) + */ +#define IS_UART_HARDWARE_FLOW_CONTROL(__CONTROL__)\ + (((__CONTROL__) == UART_HWCONTROL_NONE) || \ + ((__CONTROL__) == UART_HWCONTROL_RTS) || \ + ((__CONTROL__) == UART_HWCONTROL_CTS) || \ + ((__CONTROL__) == UART_HWCONTROL_RTS_CTS)) + +/** + * @brief Ensure that UART communication mode is valid. + * @param __MODE__ UART communication mode. + * @retval SET (__MODE__ is valid) or RESET (__MODE__ is invalid) + */ +#define IS_UART_MODE(__MODE__) ((((__MODE__) & (~((uint32_t)(UART_MODE_TX_RX)))) == 0x00U) && ((__MODE__) != 0x00U)) + +/** + * @brief Ensure that UART state is valid. + * @param __STATE__ UART state. + * @retval SET (__STATE__ is valid) or RESET (__STATE__ is invalid) + */ +#define IS_UART_STATE(__STATE__) (((__STATE__) == UART_STATE_DISABLE) || \ + ((__STATE__) == UART_STATE_ENABLE)) + +/** + * @brief Ensure that UART oversampling is valid. + * @param __SAMPLING__ UART oversampling. + * @retval SET (__SAMPLING__ is valid) or RESET (__SAMPLING__ is invalid) + */ +#define IS_UART_OVERSAMPLING(__SAMPLING__) (((__SAMPLING__) == UART_OVERSAMPLING_16) || \ + ((__SAMPLING__) == UART_OVERSAMPLING_8)) + +/** + * @brief Ensure that UART frame sampling is valid. + * @param __ONEBIT__ UART frame sampling. + * @retval SET (__ONEBIT__ is valid) or RESET (__ONEBIT__ is invalid) + */ +#define IS_UART_ONE_BIT_SAMPLE(__ONEBIT__) (((__ONEBIT__) == UART_ONE_BIT_SAMPLE_DISABLE) || \ + ((__ONEBIT__) == UART_ONE_BIT_SAMPLE_ENABLE)) + +/** + * @brief Ensure that UART auto Baud rate detection mode is valid. + * @param __MODE__ UART auto Baud rate detection mode. + * @retval SET (__MODE__ is valid) or RESET (__MODE__ is invalid) + */ +#define IS_UART_ADVFEATURE_AUTOBAUDRATEMODE(__MODE__) (((__MODE__) == UART_ADVFEATURE_AUTOBAUDRATE_ONSTARTBIT) || \ + ((__MODE__) == UART_ADVFEATURE_AUTOBAUDRATE_ONFALLINGEDGE) || \ + ((__MODE__) == UART_ADVFEATURE_AUTOBAUDRATE_ON0X7FFRAME) || \ + ((__MODE__) == UART_ADVFEATURE_AUTOBAUDRATE_ON0X55FRAME)) + +/** + * @brief Ensure that UART receiver timeout setting is valid. + * @param __TIMEOUT__ UART receiver timeout setting. + * @retval SET (__TIMEOUT__ is valid) or RESET (__TIMEOUT__ is invalid) + */ +#define IS_UART_RECEIVER_TIMEOUT(__TIMEOUT__) (((__TIMEOUT__) == UART_RECEIVER_TIMEOUT_DISABLE) || \ + ((__TIMEOUT__) == UART_RECEIVER_TIMEOUT_ENABLE)) + +/** @brief Check the receiver timeout value. + * @note The maximum UART receiver timeout value is 0xFFFFFF. + * @param __TIMEOUTVALUE__ receiver timeout value. + * @retval Test result (TRUE or FALSE) + */ +#define IS_UART_RECEIVER_TIMEOUT_VALUE(__TIMEOUTVALUE__) ((__TIMEOUTVALUE__) <= 0xFFFFFFU) + +/** + * @brief Ensure that UART LIN state is valid. + * @param __LIN__ UART LIN state. + * @retval SET (__LIN__ is valid) or RESET (__LIN__ is invalid) + */ +#define IS_UART_LIN(__LIN__) (((__LIN__) == UART_LIN_DISABLE) || \ + ((__LIN__) == UART_LIN_ENABLE)) + +/** + * @brief Ensure that UART LIN break detection length is valid. + * @param __LENGTH__ UART LIN break detection length. + * @retval SET (__LENGTH__ is valid) or RESET (__LENGTH__ is invalid) + */ +#define IS_UART_LIN_BREAK_DETECT_LENGTH(__LENGTH__) (((__LENGTH__) == UART_LINBREAKDETECTLENGTH_10B) || \ + ((__LENGTH__) == UART_LINBREAKDETECTLENGTH_11B)) + +/** + * @brief Ensure that UART DMA TX state is valid. + * @param __DMATX__ UART DMA TX state. + * @retval SET (__DMATX__ is valid) or RESET (__DMATX__ is invalid) + */ +#define IS_UART_DMA_TX(__DMATX__) (((__DMATX__) == UART_DMA_TX_DISABLE) || \ + ((__DMATX__) == UART_DMA_TX_ENABLE)) + +/** + * @brief Ensure that UART DMA RX state is valid. + * @param __DMARX__ UART DMA RX state. + * @retval SET (__DMARX__ is valid) or RESET (__DMARX__ is invalid) + */ +#define IS_UART_DMA_RX(__DMARX__) (((__DMARX__) == UART_DMA_RX_DISABLE) || \ + ((__DMARX__) == UART_DMA_RX_ENABLE)) + +/** + * @brief Ensure that UART half-duplex state is valid. + * @param __HDSEL__ UART half-duplex state. + * @retval SET (__HDSEL__ is valid) or RESET (__HDSEL__ is invalid) + */ +#define IS_UART_HALF_DUPLEX(__HDSEL__) (((__HDSEL__) == UART_HALF_DUPLEX_DISABLE) || \ + ((__HDSEL__) == UART_HALF_DUPLEX_ENABLE)) + +/** + * @brief Ensure that UART wake-up method is valid. + * @param __WAKEUP__ UART wake-up method . + * @retval SET (__WAKEUP__ is valid) or RESET (__WAKEUP__ is invalid) + */ +#define IS_UART_WAKEUPMETHOD(__WAKEUP__) (((__WAKEUP__) == UART_WAKEUPMETHOD_IDLELINE) || \ + ((__WAKEUP__) == UART_WAKEUPMETHOD_ADDRESSMARK)) + +/** + * @brief Ensure that UART request parameter is valid. + * @param __PARAM__ UART request parameter. + * @retval SET (__PARAM__ is valid) or RESET (__PARAM__ is invalid) + */ +#define IS_UART_REQUEST_PARAMETER(__PARAM__) (((__PARAM__) == UART_AUTOBAUD_REQUEST) || \ + ((__PARAM__) == UART_SENDBREAK_REQUEST) || \ + ((__PARAM__) == UART_MUTE_MODE_REQUEST) || \ + ((__PARAM__) == UART_RXDATA_FLUSH_REQUEST) || \ + ((__PARAM__) == UART_TXDATA_FLUSH_REQUEST)) + +/** + * @brief Ensure that UART advanced features initialization is valid. + * @param __INIT__ UART advanced features initialization. + * @retval SET (__INIT__ is valid) or RESET (__INIT__ is invalid) + */ +#define IS_UART_ADVFEATURE_INIT(__INIT__) ((__INIT__) <= (UART_ADVFEATURE_NO_INIT | \ + UART_ADVFEATURE_TXINVERT_INIT | \ + UART_ADVFEATURE_RXINVERT_INIT | \ + UART_ADVFEATURE_DATAINVERT_INIT | \ + UART_ADVFEATURE_SWAP_INIT | \ + UART_ADVFEATURE_RXOVERRUNDISABLE_INIT | \ + UART_ADVFEATURE_DMADISABLEONERROR_INIT | \ + UART_ADVFEATURE_AUTOBAUDRATE_INIT | \ + UART_ADVFEATURE_MSBFIRST_INIT)) + +/** + * @brief Ensure that UART frame TX inversion setting is valid. + * @param __TXINV__ UART frame TX inversion setting. + * @retval SET (__TXINV__ is valid) or RESET (__TXINV__ is invalid) + */ +#define IS_UART_ADVFEATURE_TXINV(__TXINV__) (((__TXINV__) == UART_ADVFEATURE_TXINV_DISABLE) || \ + ((__TXINV__) == UART_ADVFEATURE_TXINV_ENABLE)) + +/** + * @brief Ensure that UART frame RX inversion setting is valid. + * @param __RXINV__ UART frame RX inversion setting. + * @retval SET (__RXINV__ is valid) or RESET (__RXINV__ is invalid) + */ +#define IS_UART_ADVFEATURE_RXINV(__RXINV__) (((__RXINV__) == UART_ADVFEATURE_RXINV_DISABLE) || \ + ((__RXINV__) == UART_ADVFEATURE_RXINV_ENABLE)) + +/** + * @brief Ensure that UART frame data inversion setting is valid. + * @param __DATAINV__ UART frame data inversion setting. + * @retval SET (__DATAINV__ is valid) or RESET (__DATAINV__ is invalid) + */ +#define IS_UART_ADVFEATURE_DATAINV(__DATAINV__) (((__DATAINV__) == UART_ADVFEATURE_DATAINV_DISABLE) || \ + ((__DATAINV__) == UART_ADVFEATURE_DATAINV_ENABLE)) + +/** + * @brief Ensure that UART frame RX/TX pins swap setting is valid. + * @param __SWAP__ UART frame RX/TX pins swap setting. + * @retval SET (__SWAP__ is valid) or RESET (__SWAP__ is invalid) + */ +#define IS_UART_ADVFEATURE_SWAP(__SWAP__) (((__SWAP__) == UART_ADVFEATURE_SWAP_DISABLE) || \ + ((__SWAP__) == UART_ADVFEATURE_SWAP_ENABLE)) + +/** + * @brief Ensure that UART frame overrun setting is valid. + * @param __OVERRUN__ UART frame overrun setting. + * @retval SET (__OVERRUN__ is valid) or RESET (__OVERRUN__ is invalid) + */ +#define IS_UART_OVERRUN(__OVERRUN__) (((__OVERRUN__) == UART_ADVFEATURE_OVERRUN_ENABLE) || \ + ((__OVERRUN__) == UART_ADVFEATURE_OVERRUN_DISABLE)) + +/** + * @brief Ensure that UART auto Baud rate state is valid. + * @param __AUTOBAUDRATE__ UART auto Baud rate state. + * @retval SET (__AUTOBAUDRATE__ is valid) or RESET (__AUTOBAUDRATE__ is invalid) + */ +#define IS_UART_ADVFEATURE_AUTOBAUDRATE(__AUTOBAUDRATE__) (((__AUTOBAUDRATE__) == \ + UART_ADVFEATURE_AUTOBAUDRATE_DISABLE) || \ + ((__AUTOBAUDRATE__) == UART_ADVFEATURE_AUTOBAUDRATE_ENABLE)) + +/** + * @brief Ensure that UART DMA enabling or disabling on error setting is valid. + * @param __DMA__ UART DMA enabling or disabling on error setting. + * @retval SET (__DMA__ is valid) or RESET (__DMA__ is invalid) + */ +#define IS_UART_ADVFEATURE_DMAONRXERROR(__DMA__) (((__DMA__) == UART_ADVFEATURE_DMA_ENABLEONRXERROR) || \ + ((__DMA__) == UART_ADVFEATURE_DMA_DISABLEONRXERROR)) + +/** + * @brief Ensure that UART frame MSB first setting is valid. + * @param __MSBFIRST__ UART frame MSB first setting. + * @retval SET (__MSBFIRST__ is valid) or RESET (__MSBFIRST__ is invalid) + */ +#define IS_UART_ADVFEATURE_MSBFIRST(__MSBFIRST__) (((__MSBFIRST__) == UART_ADVFEATURE_MSBFIRST_DISABLE) || \ + ((__MSBFIRST__) == UART_ADVFEATURE_MSBFIRST_ENABLE)) + +/** + * @brief Ensure that UART stop mode state is valid. + * @param __STOPMODE__ UART stop mode state. + * @retval SET (__STOPMODE__ is valid) or RESET (__STOPMODE__ is invalid) + */ +#define IS_UART_ADVFEATURE_STOPMODE(__STOPMODE__) (((__STOPMODE__) == UART_ADVFEATURE_STOPMODE_DISABLE) || \ + ((__STOPMODE__) == UART_ADVFEATURE_STOPMODE_ENABLE)) + +/** + * @brief Ensure that UART mute mode state is valid. + * @param __MUTE__ UART mute mode state. + * @retval SET (__MUTE__ is valid) or RESET (__MUTE__ is invalid) + */ +#define IS_UART_MUTE_MODE(__MUTE__) (((__MUTE__) == UART_ADVFEATURE_MUTEMODE_DISABLE) || \ + ((__MUTE__) == UART_ADVFEATURE_MUTEMODE_ENABLE)) + +/** + * @brief Ensure that UART wake-up selection is valid. + * @param __WAKE__ UART wake-up selection. + * @retval SET (__WAKE__ is valid) or RESET (__WAKE__ is invalid) + */ +#define IS_UART_WAKEUP_SELECTION(__WAKE__) (((__WAKE__) == UART_WAKEUP_ON_ADDRESS) || \ + ((__WAKE__) == UART_WAKEUP_ON_STARTBIT) || \ + ((__WAKE__) == UART_WAKEUP_ON_READDATA_NONEMPTY)) + +/** + * @brief Ensure that UART driver enable polarity is valid. + * @param __POLARITY__ UART driver enable polarity. + * @retval SET (__POLARITY__ is valid) or RESET (__POLARITY__ is invalid) + */ +#define IS_UART_DE_POLARITY(__POLARITY__) (((__POLARITY__) == UART_DE_POLARITY_HIGH) || \ + ((__POLARITY__) == UART_DE_POLARITY_LOW)) + +#if defined(USART_PRESC_PRESCALER) +/** + * @brief Ensure that UART Prescaler is valid. + * @param __CLOCKPRESCALER__ UART Prescaler value. + * @retval SET (__CLOCKPRESCALER__ is valid) or RESET (__CLOCKPRESCALER__ is invalid) + */ +#define IS_UART_PRESCALER(__CLOCKPRESCALER__) (((__CLOCKPRESCALER__) == UART_PRESCALER_DIV1) || \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV2) || \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV4) || \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV6) || \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV8) || \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV10) || \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV12) || \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV16) || \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV32) || \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV64) || \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV128) || \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV256)) +#endif /* USART_PRESC_PRESCALER */ + +/** + * @} + */ + +/* Include UART HAL Extended module */ +#include "stm32l4xx_hal_uart_ex.h" + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup UART_Exported_Functions UART Exported Functions + * @{ + */ + +/** @addtogroup UART_Exported_Functions_Group1 Initialization and de-initialization functions + * @{ + */ + +/* Initialization and de-initialization functions ****************************/ +HAL_StatusTypeDef HAL_UART_Init(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_HalfDuplex_Init(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_LIN_Init(UART_HandleTypeDef *huart, uint32_t BreakDetectLength); +HAL_StatusTypeDef HAL_MultiProcessor_Init(UART_HandleTypeDef *huart, uint8_t Address, uint32_t WakeUpMethod); +HAL_StatusTypeDef HAL_UART_DeInit(UART_HandleTypeDef *huart); +void HAL_UART_MspInit(UART_HandleTypeDef *huart); +void HAL_UART_MspDeInit(UART_HandleTypeDef *huart); + +/* Callbacks Register/UnRegister functions ***********************************/ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) +HAL_StatusTypeDef HAL_UART_RegisterCallback(UART_HandleTypeDef *huart, HAL_UART_CallbackIDTypeDef CallbackID, + pUART_CallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_UART_UnRegisterCallback(UART_HandleTypeDef *huart, HAL_UART_CallbackIDTypeDef CallbackID); + +HAL_StatusTypeDef HAL_UART_RegisterRxEventCallback(UART_HandleTypeDef *huart, pUART_RxEventCallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_UART_UnRegisterRxEventCallback(UART_HandleTypeDef *huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** @addtogroup UART_Exported_Functions_Group2 IO operation functions + * @{ + */ + +/* IO operation functions *****************************************************/ +HAL_StatusTypeDef HAL_UART_Transmit(UART_HandleTypeDef *huart, const uint8_t *pData, uint16_t Size, uint32_t Timeout); +HAL_StatusTypeDef HAL_UART_Receive(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint32_t Timeout); +HAL_StatusTypeDef HAL_UART_Transmit_IT(UART_HandleTypeDef *huart, const uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_UART_Receive_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_UART_Transmit_DMA(UART_HandleTypeDef *huart, const uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_UART_Receive_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_UART_DMAPause(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_UART_DMAResume(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_UART_DMAStop(UART_HandleTypeDef *huart); +/* Transfer Abort functions */ +HAL_StatusTypeDef HAL_UART_Abort(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_UART_AbortTransmit(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_UART_AbortReceive(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_UART_Abort_IT(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_UART_AbortTransmit_IT(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_UART_AbortReceive_IT(UART_HandleTypeDef *huart); + +void HAL_UART_IRQHandler(UART_HandleTypeDef *huart); +void HAL_UART_TxHalfCpltCallback(UART_HandleTypeDef *huart); +void HAL_UART_TxCpltCallback(UART_HandleTypeDef *huart); +void HAL_UART_RxHalfCpltCallback(UART_HandleTypeDef *huart); +void HAL_UART_RxCpltCallback(UART_HandleTypeDef *huart); +void HAL_UART_ErrorCallback(UART_HandleTypeDef *huart); +void HAL_UART_AbortCpltCallback(UART_HandleTypeDef *huart); +void HAL_UART_AbortTransmitCpltCallback(UART_HandleTypeDef *huart); +void HAL_UART_AbortReceiveCpltCallback(UART_HandleTypeDef *huart); + +void HAL_UARTEx_RxEventCallback(UART_HandleTypeDef *huart, uint16_t Size); + +/** + * @} + */ + +/** @addtogroup UART_Exported_Functions_Group3 Peripheral Control functions + * @{ + */ + +/* Peripheral Control functions ************************************************/ +void HAL_UART_ReceiverTimeout_Config(UART_HandleTypeDef *huart, uint32_t TimeoutValue); +HAL_StatusTypeDef HAL_UART_EnableReceiverTimeout(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_UART_DisableReceiverTimeout(UART_HandleTypeDef *huart); + +HAL_StatusTypeDef HAL_LIN_SendBreak(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_MultiProcessor_EnableMuteMode(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_MultiProcessor_DisableMuteMode(UART_HandleTypeDef *huart); +void HAL_MultiProcessor_EnterMuteMode(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_HalfDuplex_EnableTransmitter(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_HalfDuplex_EnableReceiver(UART_HandleTypeDef *huart); + +/** + * @} + */ + +/** @addtogroup UART_Exported_Functions_Group4 Peripheral State and Error functions + * @{ + */ + +/* Peripheral State and Errors functions **************************************************/ +HAL_UART_StateTypeDef HAL_UART_GetState(const UART_HandleTypeDef *huart); +uint32_t HAL_UART_GetError(const UART_HandleTypeDef *huart); + +/** + * @} + */ + +/** + * @} + */ + +/* Private functions -----------------------------------------------------------*/ +/** @addtogroup UART_Private_Functions UART Private Functions + * @{ + */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) +void UART_InitCallbacksToDefault(UART_HandleTypeDef *huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ +HAL_StatusTypeDef UART_SetConfig(UART_HandleTypeDef *huart); +HAL_StatusTypeDef UART_CheckIdleState(UART_HandleTypeDef *huart); +HAL_StatusTypeDef UART_WaitOnFlagUntilTimeout(UART_HandleTypeDef *huart, uint32_t Flag, FlagStatus Status, + uint32_t Tickstart, uint32_t Timeout); +void UART_AdvFeatureConfig(UART_HandleTypeDef *huart); +HAL_StatusTypeDef UART_Start_Receive_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef UART_Start_Receive_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size); + +/** + * @} + */ + +/* Private variables -----------------------------------------------------------*/ +#if defined(USART_PRESC_PRESCALER) +/** @defgroup UART_Private_variables UART Private variables + * @{ + */ +/* Prescaler Table used in BRR computation macros. + Declared as extern here to allow use of private UART macros, outside of HAL UART functions */ +extern const uint16_t UARTPrescTable[12]; +/** + * @} + */ + +#endif /* USART_PRESC_PRESCALER */ +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32L4xx_HAL_UART_H */ + diff --git a/CablePositioning_IAP_V1.0/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_uart_ex.h b/CablePositioning_IAP_V1.0/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_uart_ex.h index 426b319..d450962 100644 --- a/CablePositioning_IAP_V1.0/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_uart_ex.h +++ b/CablePositioning_IAP_V1.0/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_uart_ex.h @@ -1,743 +1,748 @@ -/** - ****************************************************************************** - * @file stm32l4xx_hal_uart_ex.h - * @author MCD Application Team - * @brief Header file of UART HAL Extended module. - ****************************************************************************** - * @attention - * - * Copyright (c) 2017 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef STM32L4xx_HAL_UART_EX_H -#define STM32L4xx_HAL_UART_EX_H - -#ifdef __cplusplus -extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32l4xx_hal_def.h" - -/** @addtogroup STM32L4xx_HAL_Driver - * @{ - */ - -/** @addtogroup UARTEx - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ -/** @defgroup UARTEx_Exported_Types UARTEx Exported Types - * @{ - */ - -/** - * @brief UART wake up from stop mode parameters - */ -typedef struct -{ - uint32_t WakeUpEvent; /*!< Specifies which event will activate the Wakeup from Stop mode flag (WUF). - This parameter can be a value of @ref UART_WakeUp_from_Stop_Selection. - If set to UART_WAKEUP_ON_ADDRESS, the two other fields below must - be filled up. */ - - uint16_t AddressLength; /*!< Specifies whether the address is 4 or 7-bit long. - This parameter can be a value of @ref UARTEx_WakeUp_Address_Length. */ - - uint8_t Address; /*!< UART/USART node address (7-bit long max). */ -} UART_WakeUpTypeDef; - -/** - * @} - */ - -/* Exported constants --------------------------------------------------------*/ -/** @defgroup UARTEx_Exported_Constants UARTEx Exported Constants - * @{ - */ - -/** @defgroup UARTEx_Word_Length UARTEx Word Length - * @{ - */ -#define UART_WORDLENGTH_7B USART_CR1_M1 /*!< 7-bit long UART frame */ -#define UART_WORDLENGTH_8B 0x00000000U /*!< 8-bit long UART frame */ -#define UART_WORDLENGTH_9B USART_CR1_M0 /*!< 9-bit long UART frame */ -/** - * @} - */ - -/** @defgroup UARTEx_WakeUp_Address_Length UARTEx WakeUp Address Length - * @{ - */ -#define UART_ADDRESS_DETECT_4B 0x00000000U /*!< 4-bit long wake-up address */ -#define UART_ADDRESS_DETECT_7B USART_CR2_ADDM7 /*!< 7-bit long wake-up address */ -/** - * @} - */ - -#if defined(USART_CR1_FIFOEN) -/** @defgroup UARTEx_FIFO_mode UARTEx FIFO mode - * @brief UART FIFO mode - * @{ - */ -#define UART_FIFOMODE_DISABLE 0x00000000U /*!< FIFO mode disable */ -#define UART_FIFOMODE_ENABLE USART_CR1_FIFOEN /*!< FIFO mode enable */ -/** - * @} - */ - -/** @defgroup UARTEx_TXFIFO_threshold_level UARTEx TXFIFO threshold level - * @brief UART TXFIFO threshold level - * @{ - */ -#define UART_TXFIFO_THRESHOLD_1_8 0x00000000U /*!< TX FIFO reaches 1/8 of its depth */ -#define UART_TXFIFO_THRESHOLD_1_4 USART_CR3_TXFTCFG_0 /*!< TX FIFO reaches 1/4 of its depth */ -#define UART_TXFIFO_THRESHOLD_1_2 USART_CR3_TXFTCFG_1 /*!< TX FIFO reaches 1/2 of its depth */ -#define UART_TXFIFO_THRESHOLD_3_4 (USART_CR3_TXFTCFG_0|USART_CR3_TXFTCFG_1) /*!< TX FIFO reaches 3/4 of its depth */ -#define UART_TXFIFO_THRESHOLD_7_8 USART_CR3_TXFTCFG_2 /*!< TX FIFO reaches 7/8 of its depth */ -#define UART_TXFIFO_THRESHOLD_8_8 (USART_CR3_TXFTCFG_2|USART_CR3_TXFTCFG_0) /*!< TX FIFO becomes empty */ -/** - * @} - */ - -/** @defgroup UARTEx_RXFIFO_threshold_level UARTEx RXFIFO threshold level - * @brief UART RXFIFO threshold level - * @{ - */ -#define UART_RXFIFO_THRESHOLD_1_8 0x00000000U /*!< RX FIFO reaches 1/8 of its depth */ -#define UART_RXFIFO_THRESHOLD_1_4 USART_CR3_RXFTCFG_0 /*!< RX FIFO reaches 1/4 of its depth */ -#define UART_RXFIFO_THRESHOLD_1_2 USART_CR3_RXFTCFG_1 /*!< RX FIFO reaches 1/2 of its depth */ -#define UART_RXFIFO_THRESHOLD_3_4 (USART_CR3_RXFTCFG_0|USART_CR3_RXFTCFG_1) /*!< RX FIFO reaches 3/4 of its depth */ -#define UART_RXFIFO_THRESHOLD_7_8 USART_CR3_RXFTCFG_2 /*!< RX FIFO reaches 7/8 of its depth */ -#define UART_RXFIFO_THRESHOLD_8_8 (USART_CR3_RXFTCFG_2|USART_CR3_RXFTCFG_0) /*!< RX FIFO becomes full */ -/** - * @} - */ - -#endif /* USART_CR1_FIFOEN */ -/** - * @} - */ - -/* Exported macros -----------------------------------------------------------*/ -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup UARTEx_Exported_Functions - * @{ - */ - -/** @addtogroup UARTEx_Exported_Functions_Group1 - * @{ - */ - -/* Initialization and de-initialization functions ****************************/ -HAL_StatusTypeDef HAL_RS485Ex_Init(UART_HandleTypeDef *huart, uint32_t Polarity, uint32_t AssertionTime, - uint32_t DeassertionTime); - -/** - * @} - */ - -/** @addtogroup UARTEx_Exported_Functions_Group2 - * @{ - */ - -void HAL_UARTEx_WakeupCallback(UART_HandleTypeDef *huart); - -#if defined(USART_CR1_FIFOEN) -void HAL_UARTEx_RxFifoFullCallback(UART_HandleTypeDef *huart); -void HAL_UARTEx_TxFifoEmptyCallback(UART_HandleTypeDef *huart); - -#endif /* USART_CR1_FIFOEN */ -/** - * @} - */ - -/** @addtogroup UARTEx_Exported_Functions_Group3 - * @{ - */ - -/* Peripheral Control functions **********************************************/ -HAL_StatusTypeDef HAL_UARTEx_StopModeWakeUpSourceConfig(UART_HandleTypeDef *huart, UART_WakeUpTypeDef WakeUpSelection); -HAL_StatusTypeDef HAL_UARTEx_EnableStopMode(UART_HandleTypeDef *huart); -HAL_StatusTypeDef HAL_UARTEx_DisableStopMode(UART_HandleTypeDef *huart); - -#if defined(USART_CR3_UCESM) -HAL_StatusTypeDef HAL_UARTEx_EnableClockStopMode(UART_HandleTypeDef *huart); -HAL_StatusTypeDef HAL_UARTEx_DisableClockStopMode(UART_HandleTypeDef *huart); - -#endif /* USART_CR3_UCESM */ -HAL_StatusTypeDef HAL_MultiProcessorEx_AddressLength_Set(UART_HandleTypeDef *huart, uint32_t AddressLength); - -#if defined(USART_CR1_FIFOEN) -HAL_StatusTypeDef HAL_UARTEx_EnableFifoMode(UART_HandleTypeDef *huart); -HAL_StatusTypeDef HAL_UARTEx_DisableFifoMode(UART_HandleTypeDef *huart); -HAL_StatusTypeDef HAL_UARTEx_SetTxFifoThreshold(UART_HandleTypeDef *huart, uint32_t Threshold); -HAL_StatusTypeDef HAL_UARTEx_SetRxFifoThreshold(UART_HandleTypeDef *huart, uint32_t Threshold); -#endif /* USART_CR1_FIFOEN */ - -HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint16_t *RxLen, - uint32_t Timeout); -HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size); -HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size); - - -/** - * @} - */ - -/** - * @} - */ - -/* Private macros ------------------------------------------------------------*/ -/** @defgroup UARTEx_Private_Macros UARTEx Private Macros - * @{ - */ - -/** @brief Report the UART clock source. - * @param __HANDLE__ specifies the UART Handle. - * @param __CLOCKSOURCE__ output variable. - * @retval UART clocking source, written in __CLOCKSOURCE__. - */ -#if defined (STM32L471xx) || defined (STM32L475xx) || defined (STM32L476xx) || defined (STM32L485xx) || defined (STM32L486xx) \ - || defined (STM32L496xx) || defined (STM32L4A6xx) \ - || defined (STM32L4P5xx) || defined (STM32L4Q5xx) \ - || defined (STM32L4R5xx) || defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined (STM32L4S9xx) -#define UART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \ - do { \ - if((__HANDLE__)->Instance == USART1) \ - { \ - switch(__HAL_RCC_GET_USART1_SOURCE()) \ - { \ - case RCC_USART1CLKSOURCE_PCLK2: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK2; \ - break; \ - case RCC_USART1CLKSOURCE_HSI: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ - break; \ - case RCC_USART1CLKSOURCE_SYSCLK: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \ - break; \ - case RCC_USART1CLKSOURCE_LSE: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ - break; \ - default: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ - break; \ - } \ - } \ - else if((__HANDLE__)->Instance == USART2) \ - { \ - switch(__HAL_RCC_GET_USART2_SOURCE()) \ - { \ - case RCC_USART2CLKSOURCE_PCLK1: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ - break; \ - case RCC_USART2CLKSOURCE_HSI: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ - break; \ - case RCC_USART2CLKSOURCE_SYSCLK: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \ - break; \ - case RCC_USART2CLKSOURCE_LSE: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ - break; \ - default: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ - break; \ - } \ - } \ - else if((__HANDLE__)->Instance == USART3) \ - { \ - switch(__HAL_RCC_GET_USART3_SOURCE()) \ - { \ - case RCC_USART3CLKSOURCE_PCLK1: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ - break; \ - case RCC_USART3CLKSOURCE_HSI: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ - break; \ - case RCC_USART3CLKSOURCE_SYSCLK: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \ - break; \ - case RCC_USART3CLKSOURCE_LSE: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ - break; \ - default: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ - break; \ - } \ - } \ - else if((__HANDLE__)->Instance == UART4) \ - { \ - switch(__HAL_RCC_GET_UART4_SOURCE()) \ - { \ - case RCC_UART4CLKSOURCE_PCLK1: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ - break; \ - case RCC_UART4CLKSOURCE_HSI: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ - break; \ - case RCC_UART4CLKSOURCE_SYSCLK: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \ - break; \ - case RCC_UART4CLKSOURCE_LSE: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ - break; \ - default: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ - break; \ - } \ - } \ - else if((__HANDLE__)->Instance == UART5) \ - { \ - switch(__HAL_RCC_GET_UART5_SOURCE()) \ - { \ - case RCC_UART5CLKSOURCE_PCLK1: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ - break; \ - case RCC_UART5CLKSOURCE_HSI: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ - break; \ - case RCC_UART5CLKSOURCE_SYSCLK: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \ - break; \ - case RCC_UART5CLKSOURCE_LSE: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ - break; \ - default: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ - break; \ - } \ - } \ - else if((__HANDLE__)->Instance == LPUART1) \ - { \ - switch(__HAL_RCC_GET_LPUART1_SOURCE()) \ - { \ - case RCC_LPUART1CLKSOURCE_PCLK1: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ - break; \ - case RCC_LPUART1CLKSOURCE_HSI: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ - break; \ - case RCC_LPUART1CLKSOURCE_SYSCLK: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \ - break; \ - case RCC_LPUART1CLKSOURCE_LSE: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ - break; \ - default: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ - break; \ - } \ - } \ - else \ - { \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ - } \ - } while(0U) -#elif defined (STM32L412xx) || defined (STM32L422xx) \ - || defined (STM32L431xx) || defined (STM32L433xx) || defined (STM32L443xx) -#define UART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \ - do { \ - if((__HANDLE__)->Instance == USART1) \ - { \ - switch(__HAL_RCC_GET_USART1_SOURCE()) \ - { \ - case RCC_USART1CLKSOURCE_PCLK2: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK2; \ - break; \ - case RCC_USART1CLKSOURCE_HSI: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ - break; \ - case RCC_USART1CLKSOURCE_SYSCLK: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \ - break; \ - case RCC_USART1CLKSOURCE_LSE: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ - break; \ - default: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ - break; \ - } \ - } \ - else if((__HANDLE__)->Instance == USART2) \ - { \ - switch(__HAL_RCC_GET_USART2_SOURCE()) \ - { \ - case RCC_USART2CLKSOURCE_PCLK1: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ - break; \ - case RCC_USART2CLKSOURCE_HSI: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ - break; \ - case RCC_USART2CLKSOURCE_SYSCLK: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \ - break; \ - case RCC_USART2CLKSOURCE_LSE: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ - break; \ - default: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ - break; \ - } \ - } \ - else if((__HANDLE__)->Instance == USART3) \ - { \ - switch(__HAL_RCC_GET_USART3_SOURCE()) \ - { \ - case RCC_USART3CLKSOURCE_PCLK1: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ - break; \ - case RCC_USART3CLKSOURCE_HSI: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ - break; \ - case RCC_USART3CLKSOURCE_SYSCLK: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \ - break; \ - case RCC_USART3CLKSOURCE_LSE: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ - break; \ - default: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ - break; \ - } \ - } \ - else if((__HANDLE__)->Instance == LPUART1) \ - { \ - switch(__HAL_RCC_GET_LPUART1_SOURCE()) \ - { \ - case RCC_LPUART1CLKSOURCE_PCLK1: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ - break; \ - case RCC_LPUART1CLKSOURCE_HSI: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ - break; \ - case RCC_LPUART1CLKSOURCE_SYSCLK: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \ - break; \ - case RCC_LPUART1CLKSOURCE_LSE: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ - break; \ - default: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ - break; \ - } \ - } \ - else \ - { \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ - } \ - } while(0U) -#elif defined (STM32L432xx) || defined (STM32L442xx) -#define UART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \ - do { \ - if((__HANDLE__)->Instance == USART1) \ - { \ - switch(__HAL_RCC_GET_USART1_SOURCE()) \ - { \ - case RCC_USART1CLKSOURCE_PCLK2: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK2; \ - break; \ - case RCC_USART1CLKSOURCE_HSI: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ - break; \ - case RCC_USART1CLKSOURCE_SYSCLK: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \ - break; \ - case RCC_USART1CLKSOURCE_LSE: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ - break; \ - default: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ - break; \ - } \ - } \ - else if((__HANDLE__)->Instance == USART2) \ - { \ - switch(__HAL_RCC_GET_USART2_SOURCE()) \ - { \ - case RCC_USART2CLKSOURCE_PCLK1: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ - break; \ - case RCC_USART2CLKSOURCE_HSI: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ - break; \ - case RCC_USART2CLKSOURCE_SYSCLK: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \ - break; \ - case RCC_USART2CLKSOURCE_LSE: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ - break; \ - default: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ - break; \ - } \ - } \ - else if((__HANDLE__)->Instance == LPUART1) \ - { \ - switch(__HAL_RCC_GET_LPUART1_SOURCE()) \ - { \ - case RCC_LPUART1CLKSOURCE_PCLK1: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ - break; \ - case RCC_LPUART1CLKSOURCE_HSI: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ - break; \ - case RCC_LPUART1CLKSOURCE_SYSCLK: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \ - break; \ - case RCC_LPUART1CLKSOURCE_LSE: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ - break; \ - default: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ - break; \ - } \ - } \ - else \ - { \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ - } \ - } while(0U) -#elif defined (STM32L451xx) || defined (STM32L452xx) || defined (STM32L462xx) -#define UART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \ - do { \ - if((__HANDLE__)->Instance == USART1) \ - { \ - switch(__HAL_RCC_GET_USART1_SOURCE()) \ - { \ - case RCC_USART1CLKSOURCE_PCLK2: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK2; \ - break; \ - case RCC_USART1CLKSOURCE_HSI: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ - break; \ - case RCC_USART1CLKSOURCE_SYSCLK: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \ - break; \ - case RCC_USART1CLKSOURCE_LSE: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ - break; \ - default: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ - break; \ - } \ - } \ - else if((__HANDLE__)->Instance == USART2) \ - { \ - switch(__HAL_RCC_GET_USART2_SOURCE()) \ - { \ - case RCC_USART2CLKSOURCE_PCLK1: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ - break; \ - case RCC_USART2CLKSOURCE_HSI: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ - break; \ - case RCC_USART2CLKSOURCE_SYSCLK: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \ - break; \ - case RCC_USART2CLKSOURCE_LSE: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ - break; \ - default: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ - break; \ - } \ - } \ - else if((__HANDLE__)->Instance == USART3) \ - { \ - switch(__HAL_RCC_GET_USART3_SOURCE()) \ - { \ - case RCC_USART3CLKSOURCE_PCLK1: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ - break; \ - case RCC_USART3CLKSOURCE_HSI: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ - break; \ - case RCC_USART3CLKSOURCE_SYSCLK: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \ - break; \ - case RCC_USART3CLKSOURCE_LSE: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ - break; \ - default: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ - break; \ - } \ - } \ - else if((__HANDLE__)->Instance == UART4) \ - { \ - switch(__HAL_RCC_GET_UART4_SOURCE()) \ - { \ - case RCC_UART4CLKSOURCE_PCLK1: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ - break; \ - case RCC_UART4CLKSOURCE_HSI: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ - break; \ - case RCC_UART4CLKSOURCE_SYSCLK: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \ - break; \ - case RCC_UART4CLKSOURCE_LSE: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ - break; \ - default: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ - break; \ - } \ - } \ - else if((__HANDLE__)->Instance == LPUART1) \ - { \ - switch(__HAL_RCC_GET_LPUART1_SOURCE()) \ - { \ - case RCC_LPUART1CLKSOURCE_PCLK1: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ - break; \ - case RCC_LPUART1CLKSOURCE_HSI: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ - break; \ - case RCC_LPUART1CLKSOURCE_SYSCLK: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \ - break; \ - case RCC_LPUART1CLKSOURCE_LSE: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ - break; \ - default: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ - break; \ - } \ - } \ - else \ - { \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ - } \ - } while(0U) -#endif /* STM32L471xx || STM32L475xx || STM32L476xx || STM32L485xx || STM32L486xx || - * STM32L496xx || STM32L4A6xx || - * STM32L4P5xx || STM32L4Q5xx || - * STM32L4R5xx || STM32L4R7xx || STM32L4R9xx || STM32L4S5xx || STM32L4S7xx || STM32L4S9xx - */ - -/** @brief Report the UART mask to apply to retrieve the received data - * according to the word length and to the parity bits activation. - * @note If PCE = 1, the parity bit is not included in the data extracted - * by the reception API(). - * This masking operation is not carried out in the case of - * DMA transfers. - * @param __HANDLE__ specifies the UART Handle. - * @retval None, the mask to apply to UART RDR register is stored in (__HANDLE__)->Mask field. - */ -#define UART_MASK_COMPUTATION(__HANDLE__) \ - do { \ - if ((__HANDLE__)->Init.WordLength == UART_WORDLENGTH_9B) \ - { \ - if ((__HANDLE__)->Init.Parity == UART_PARITY_NONE) \ - { \ - (__HANDLE__)->Mask = 0x01FFU ; \ - } \ - else \ - { \ - (__HANDLE__)->Mask = 0x00FFU ; \ - } \ - } \ - else if ((__HANDLE__)->Init.WordLength == UART_WORDLENGTH_8B) \ - { \ - if ((__HANDLE__)->Init.Parity == UART_PARITY_NONE) \ - { \ - (__HANDLE__)->Mask = 0x00FFU ; \ - } \ - else \ - { \ - (__HANDLE__)->Mask = 0x007FU ; \ - } \ - } \ - else if ((__HANDLE__)->Init.WordLength == UART_WORDLENGTH_7B) \ - { \ - if ((__HANDLE__)->Init.Parity == UART_PARITY_NONE) \ - { \ - (__HANDLE__)->Mask = 0x007FU ; \ - } \ - else \ - { \ - (__HANDLE__)->Mask = 0x003FU ; \ - } \ - } \ - else \ - { \ - (__HANDLE__)->Mask = 0x0000U; \ - } \ - } while(0U) - -/** - * @brief Ensure that UART frame length is valid. - * @param __LENGTH__ UART frame length. - * @retval SET (__LENGTH__ is valid) or RESET (__LENGTH__ is invalid) - */ -#define IS_UART_WORD_LENGTH(__LENGTH__) (((__LENGTH__) == UART_WORDLENGTH_7B) || \ - ((__LENGTH__) == UART_WORDLENGTH_8B) || \ - ((__LENGTH__) == UART_WORDLENGTH_9B)) - -/** - * @brief Ensure that UART wake-up address length is valid. - * @param __ADDRESS__ UART wake-up address length. - * @retval SET (__ADDRESS__ is valid) or RESET (__ADDRESS__ is invalid) - */ -#define IS_UART_ADDRESSLENGTH_DETECT(__ADDRESS__) (((__ADDRESS__) == UART_ADDRESS_DETECT_4B) || \ - ((__ADDRESS__) == UART_ADDRESS_DETECT_7B)) - -#if defined(USART_CR1_FIFOEN) -/** - * @brief Ensure that UART TXFIFO threshold level is valid. - * @param __THRESHOLD__ UART TXFIFO threshold level. - * @retval SET (__THRESHOLD__ is valid) or RESET (__THRESHOLD__ is invalid) - */ -#define IS_UART_TXFIFO_THRESHOLD(__THRESHOLD__) (((__THRESHOLD__) == UART_TXFIFO_THRESHOLD_1_8) || \ - ((__THRESHOLD__) == UART_TXFIFO_THRESHOLD_1_4) || \ - ((__THRESHOLD__) == UART_TXFIFO_THRESHOLD_1_2) || \ - ((__THRESHOLD__) == UART_TXFIFO_THRESHOLD_3_4) || \ - ((__THRESHOLD__) == UART_TXFIFO_THRESHOLD_7_8) || \ - ((__THRESHOLD__) == UART_TXFIFO_THRESHOLD_8_8)) - -/** - * @brief Ensure that UART RXFIFO threshold level is valid. - * @param __THRESHOLD__ UART RXFIFO threshold level. - * @retval SET (__THRESHOLD__ is valid) or RESET (__THRESHOLD__ is invalid) - */ -#define IS_UART_RXFIFO_THRESHOLD(__THRESHOLD__) (((__THRESHOLD__) == UART_RXFIFO_THRESHOLD_1_8) || \ - ((__THRESHOLD__) == UART_RXFIFO_THRESHOLD_1_4) || \ - ((__THRESHOLD__) == UART_RXFIFO_THRESHOLD_1_2) || \ - ((__THRESHOLD__) == UART_RXFIFO_THRESHOLD_3_4) || \ - ((__THRESHOLD__) == UART_RXFIFO_THRESHOLD_7_8) || \ - ((__THRESHOLD__) == UART_RXFIFO_THRESHOLD_8_8)) - -#endif /* USART_CR1_FIFOEN */ -/** - * @} - */ - -/* Private functions ---------------------------------------------------------*/ - -/** - * @} - */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /* STM32L4xx_HAL_UART_EX_H */ - +/** + ****************************************************************************** + * @file stm32l4xx_hal_uart_ex.h + * @author MCD Application Team + * @brief Header file of UART HAL Extended module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32L4xx_HAL_UART_EX_H +#define STM32L4xx_HAL_UART_EX_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l4xx_hal_def.h" + +/** @addtogroup STM32L4xx_HAL_Driver + * @{ + */ + +/** @addtogroup UARTEx + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup UARTEx_Exported_Types UARTEx Exported Types + * @{ + */ + +/** + * @brief UART wake up from stop mode parameters + */ +typedef struct +{ + uint32_t WakeUpEvent; /*!< Specifies which event will activate the Wakeup from Stop mode flag (WUF). + This parameter can be a value of @ref UART_WakeUp_from_Stop_Selection. + If set to UART_WAKEUP_ON_ADDRESS, the two other fields below must + be filled up. */ + + uint16_t AddressLength; /*!< Specifies whether the address is 4 or 7-bit long. + This parameter can be a value of @ref UARTEx_WakeUp_Address_Length. */ + + uint8_t Address; /*!< UART/USART node address (7-bit long max). */ +} UART_WakeUpTypeDef; + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup UARTEx_Exported_Constants UARTEx Exported Constants + * @{ + */ + +/** @defgroup UARTEx_Word_Length UARTEx Word Length + * @{ + */ +#define UART_WORDLENGTH_7B USART_CR1_M1 /*!< 7-bit long UART frame */ +#define UART_WORDLENGTH_8B 0x00000000U /*!< 8-bit long UART frame */ +#define UART_WORDLENGTH_9B USART_CR1_M0 /*!< 9-bit long UART frame */ +/** + * @} + */ + +/** @defgroup UARTEx_WakeUp_Address_Length UARTEx WakeUp Address Length + * @{ + */ +#define UART_ADDRESS_DETECT_4B 0x00000000U /*!< 4-bit long wake-up address */ +#define UART_ADDRESS_DETECT_7B USART_CR2_ADDM7 /*!< 7-bit long wake-up address */ +/** + * @} + */ + +#if defined(USART_CR1_FIFOEN) +/** @defgroup UARTEx_FIFO_mode UARTEx FIFO mode + * @brief UART FIFO mode + * @{ + */ +#define UART_FIFOMODE_DISABLE 0x00000000U /*!< FIFO mode disable */ +#define UART_FIFOMODE_ENABLE USART_CR1_FIFOEN /*!< FIFO mode enable */ +/** + * @} + */ + +/** @defgroup UARTEx_TXFIFO_threshold_level UARTEx TXFIFO threshold level + * @brief UART TXFIFO threshold level + * @{ + */ +#define UART_TXFIFO_THRESHOLD_1_8 0x00000000U /*!< TX FIFO reaches 1/8 of its depth */ +#define UART_TXFIFO_THRESHOLD_1_4 USART_CR3_TXFTCFG_0 /*!< TX FIFO reaches 1/4 of its depth */ +#define UART_TXFIFO_THRESHOLD_1_2 USART_CR3_TXFTCFG_1 /*!< TX FIFO reaches 1/2 of its depth */ +#define UART_TXFIFO_THRESHOLD_3_4 (USART_CR3_TXFTCFG_0|USART_CR3_TXFTCFG_1) /*!< TX FIFO reaches 3/4 of its depth */ +#define UART_TXFIFO_THRESHOLD_7_8 USART_CR3_TXFTCFG_2 /*!< TX FIFO reaches 7/8 of its depth */ +#define UART_TXFIFO_THRESHOLD_8_8 (USART_CR3_TXFTCFG_2|USART_CR3_TXFTCFG_0) /*!< TX FIFO becomes empty */ +/** + * @} + */ + +/** @defgroup UARTEx_RXFIFO_threshold_level UARTEx RXFIFO threshold level + * @brief UART RXFIFO threshold level + * @{ + */ +#define UART_RXFIFO_THRESHOLD_1_8 0x00000000U /*!< RX FIFO reaches 1/8 of its depth */ +#define UART_RXFIFO_THRESHOLD_1_4 USART_CR3_RXFTCFG_0 /*!< RX FIFO reaches 1/4 of its depth */ +#define UART_RXFIFO_THRESHOLD_1_2 USART_CR3_RXFTCFG_1 /*!< RX FIFO reaches 1/2 of its depth */ +#define UART_RXFIFO_THRESHOLD_3_4 (USART_CR3_RXFTCFG_0|USART_CR3_RXFTCFG_1) /*!< RX FIFO reaches 3/4 of its depth */ +#define UART_RXFIFO_THRESHOLD_7_8 USART_CR3_RXFTCFG_2 /*!< RX FIFO reaches 7/8 of its depth */ +#define UART_RXFIFO_THRESHOLD_8_8 (USART_CR3_RXFTCFG_2|USART_CR3_RXFTCFG_0) /*!< RX FIFO becomes full */ +/** + * @} + */ + +#endif /* USART_CR1_FIFOEN */ +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup UARTEx_Exported_Functions + * @{ + */ + +/** @addtogroup UARTEx_Exported_Functions_Group1 + * @{ + */ + +/* Initialization and de-initialization functions ****************************/ +HAL_StatusTypeDef HAL_RS485Ex_Init(UART_HandleTypeDef *huart, uint32_t Polarity, uint32_t AssertionTime, + uint32_t DeassertionTime); + +/** + * @} + */ + +/** @addtogroup UARTEx_Exported_Functions_Group2 + * @{ + */ + +void HAL_UARTEx_WakeupCallback(UART_HandleTypeDef *huart); + +#if defined(USART_CR1_FIFOEN) +void HAL_UARTEx_RxFifoFullCallback(UART_HandleTypeDef *huart); +void HAL_UARTEx_TxFifoEmptyCallback(UART_HandleTypeDef *huart); + +#endif /* USART_CR1_FIFOEN */ +/** + * @} + */ + +/** @addtogroup UARTEx_Exported_Functions_Group3 + * @{ + */ + +/* Peripheral Control functions **********************************************/ +HAL_StatusTypeDef HAL_UARTEx_StopModeWakeUpSourceConfig(UART_HandleTypeDef *huart, UART_WakeUpTypeDef WakeUpSelection); +HAL_StatusTypeDef HAL_UARTEx_EnableStopMode(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_UARTEx_DisableStopMode(UART_HandleTypeDef *huart); + +#if defined(USART_CR3_UCESM) +HAL_StatusTypeDef HAL_UARTEx_EnableClockStopMode(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_UARTEx_DisableClockStopMode(UART_HandleTypeDef *huart); + +#endif /* USART_CR3_UCESM */ +HAL_StatusTypeDef HAL_MultiProcessorEx_AddressLength_Set(UART_HandleTypeDef *huart, uint32_t AddressLength); + +#if defined(USART_CR1_FIFOEN) +HAL_StatusTypeDef HAL_UARTEx_EnableFifoMode(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_UARTEx_DisableFifoMode(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_UARTEx_SetTxFifoThreshold(UART_HandleTypeDef *huart, uint32_t Threshold); +HAL_StatusTypeDef HAL_UARTEx_SetRxFifoThreshold(UART_HandleTypeDef *huart, uint32_t Threshold); +#endif /* USART_CR1_FIFOEN */ + +HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint16_t *RxLen, + uint32_t Timeout); +HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size); + +HAL_UART_RxEventTypeTypeDef HAL_UARTEx_GetRxEventType(const UART_HandleTypeDef *huart); + + +/** + * @} + */ + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup UARTEx_Private_Macros UARTEx Private Macros + * @{ + */ + +/** @brief Report the UART clock source. + * @param __HANDLE__ specifies the UART Handle. + * @param __CLOCKSOURCE__ output variable. + * @retval UART clocking source, written in __CLOCKSOURCE__. + */ +#if defined (STM32L471xx) || defined (STM32L475xx) || defined (STM32L476xx) \ + || defined (STM32L485xx) || defined (STM32L486xx) \ + || defined (STM32L496xx) || defined (STM32L4A6xx) \ + || defined (STM32L4P5xx) || defined (STM32L4Q5xx) \ + || defined (STM32L4R5xx) || defined (STM32L4R7xx) \ + || defined (STM32L4R9xx) || defined (STM32L4S5xx) \ + || defined (STM32L4S7xx) || defined (STM32L4S9xx) +#define UART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \ + do { \ + if((__HANDLE__)->Instance == USART1) \ + { \ + switch(__HAL_RCC_GET_USART1_SOURCE()) \ + { \ + case RCC_USART1CLKSOURCE_PCLK2: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK2; \ + break; \ + case RCC_USART1CLKSOURCE_HSI: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ + break; \ + case RCC_USART1CLKSOURCE_SYSCLK: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \ + break; \ + case RCC_USART1CLKSOURCE_LSE: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ + break; \ + default: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ + break; \ + } \ + } \ + else if((__HANDLE__)->Instance == USART2) \ + { \ + switch(__HAL_RCC_GET_USART2_SOURCE()) \ + { \ + case RCC_USART2CLKSOURCE_PCLK1: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ + break; \ + case RCC_USART2CLKSOURCE_HSI: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ + break; \ + case RCC_USART2CLKSOURCE_SYSCLK: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \ + break; \ + case RCC_USART2CLKSOURCE_LSE: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ + break; \ + default: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ + break; \ + } \ + } \ + else if((__HANDLE__)->Instance == USART3) \ + { \ + switch(__HAL_RCC_GET_USART3_SOURCE()) \ + { \ + case RCC_USART3CLKSOURCE_PCLK1: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ + break; \ + case RCC_USART3CLKSOURCE_HSI: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ + break; \ + case RCC_USART3CLKSOURCE_SYSCLK: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \ + break; \ + case RCC_USART3CLKSOURCE_LSE: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ + break; \ + default: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ + break; \ + } \ + } \ + else if((__HANDLE__)->Instance == UART4) \ + { \ + switch(__HAL_RCC_GET_UART4_SOURCE()) \ + { \ + case RCC_UART4CLKSOURCE_PCLK1: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ + break; \ + case RCC_UART4CLKSOURCE_HSI: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ + break; \ + case RCC_UART4CLKSOURCE_SYSCLK: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \ + break; \ + case RCC_UART4CLKSOURCE_LSE: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ + break; \ + default: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ + break; \ + } \ + } \ + else if((__HANDLE__)->Instance == UART5) \ + { \ + switch(__HAL_RCC_GET_UART5_SOURCE()) \ + { \ + case RCC_UART5CLKSOURCE_PCLK1: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ + break; \ + case RCC_UART5CLKSOURCE_HSI: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ + break; \ + case RCC_UART5CLKSOURCE_SYSCLK: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \ + break; \ + case RCC_UART5CLKSOURCE_LSE: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ + break; \ + default: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ + break; \ + } \ + } \ + else if((__HANDLE__)->Instance == LPUART1) \ + { \ + switch(__HAL_RCC_GET_LPUART1_SOURCE()) \ + { \ + case RCC_LPUART1CLKSOURCE_PCLK1: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ + break; \ + case RCC_LPUART1CLKSOURCE_HSI: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ + break; \ + case RCC_LPUART1CLKSOURCE_SYSCLK: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \ + break; \ + case RCC_LPUART1CLKSOURCE_LSE: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ + break; \ + default: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ + break; \ + } \ + } \ + else \ + { \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ + } \ + } while(0U) +#elif defined (STM32L412xx) || defined (STM32L422xx) \ + || defined (STM32L431xx) || defined (STM32L433xx) || defined (STM32L443xx) +#define UART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \ + do { \ + if((__HANDLE__)->Instance == USART1) \ + { \ + switch(__HAL_RCC_GET_USART1_SOURCE()) \ + { \ + case RCC_USART1CLKSOURCE_PCLK2: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK2; \ + break; \ + case RCC_USART1CLKSOURCE_HSI: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ + break; \ + case RCC_USART1CLKSOURCE_SYSCLK: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \ + break; \ + case RCC_USART1CLKSOURCE_LSE: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ + break; \ + default: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ + break; \ + } \ + } \ + else if((__HANDLE__)->Instance == USART2) \ + { \ + switch(__HAL_RCC_GET_USART2_SOURCE()) \ + { \ + case RCC_USART2CLKSOURCE_PCLK1: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ + break; \ + case RCC_USART2CLKSOURCE_HSI: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ + break; \ + case RCC_USART2CLKSOURCE_SYSCLK: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \ + break; \ + case RCC_USART2CLKSOURCE_LSE: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ + break; \ + default: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ + break; \ + } \ + } \ + else if((__HANDLE__)->Instance == USART3) \ + { \ + switch(__HAL_RCC_GET_USART3_SOURCE()) \ + { \ + case RCC_USART3CLKSOURCE_PCLK1: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ + break; \ + case RCC_USART3CLKSOURCE_HSI: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ + break; \ + case RCC_USART3CLKSOURCE_SYSCLK: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \ + break; \ + case RCC_USART3CLKSOURCE_LSE: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ + break; \ + default: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ + break; \ + } \ + } \ + else if((__HANDLE__)->Instance == LPUART1) \ + { \ + switch(__HAL_RCC_GET_LPUART1_SOURCE()) \ + { \ + case RCC_LPUART1CLKSOURCE_PCLK1: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ + break; \ + case RCC_LPUART1CLKSOURCE_HSI: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ + break; \ + case RCC_LPUART1CLKSOURCE_SYSCLK: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \ + break; \ + case RCC_LPUART1CLKSOURCE_LSE: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ + break; \ + default: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ + break; \ + } \ + } \ + else \ + { \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ + } \ + } while(0U) +#elif defined (STM32L432xx) || defined (STM32L442xx) +#define UART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \ + do { \ + if((__HANDLE__)->Instance == USART1) \ + { \ + switch(__HAL_RCC_GET_USART1_SOURCE()) \ + { \ + case RCC_USART1CLKSOURCE_PCLK2: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK2; \ + break; \ + case RCC_USART1CLKSOURCE_HSI: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ + break; \ + case RCC_USART1CLKSOURCE_SYSCLK: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \ + break; \ + case RCC_USART1CLKSOURCE_LSE: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ + break; \ + default: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ + break; \ + } \ + } \ + else if((__HANDLE__)->Instance == USART2) \ + { \ + switch(__HAL_RCC_GET_USART2_SOURCE()) \ + { \ + case RCC_USART2CLKSOURCE_PCLK1: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ + break; \ + case RCC_USART2CLKSOURCE_HSI: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ + break; \ + case RCC_USART2CLKSOURCE_SYSCLK: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \ + break; \ + case RCC_USART2CLKSOURCE_LSE: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ + break; \ + default: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ + break; \ + } \ + } \ + else if((__HANDLE__)->Instance == LPUART1) \ + { \ + switch(__HAL_RCC_GET_LPUART1_SOURCE()) \ + { \ + case RCC_LPUART1CLKSOURCE_PCLK1: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ + break; \ + case RCC_LPUART1CLKSOURCE_HSI: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ + break; \ + case RCC_LPUART1CLKSOURCE_SYSCLK: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \ + break; \ + case RCC_LPUART1CLKSOURCE_LSE: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ + break; \ + default: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ + break; \ + } \ + } \ + else \ + { \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ + } \ + } while(0U) +#elif defined (STM32L451xx) || defined (STM32L452xx) || defined (STM32L462xx) +#define UART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \ + do { \ + if((__HANDLE__)->Instance == USART1) \ + { \ + switch(__HAL_RCC_GET_USART1_SOURCE()) \ + { \ + case RCC_USART1CLKSOURCE_PCLK2: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK2; \ + break; \ + case RCC_USART1CLKSOURCE_HSI: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ + break; \ + case RCC_USART1CLKSOURCE_SYSCLK: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \ + break; \ + case RCC_USART1CLKSOURCE_LSE: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ + break; \ + default: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ + break; \ + } \ + } \ + else if((__HANDLE__)->Instance == USART2) \ + { \ + switch(__HAL_RCC_GET_USART2_SOURCE()) \ + { \ + case RCC_USART2CLKSOURCE_PCLK1: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ + break; \ + case RCC_USART2CLKSOURCE_HSI: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ + break; \ + case RCC_USART2CLKSOURCE_SYSCLK: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \ + break; \ + case RCC_USART2CLKSOURCE_LSE: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ + break; \ + default: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ + break; \ + } \ + } \ + else if((__HANDLE__)->Instance == USART3) \ + { \ + switch(__HAL_RCC_GET_USART3_SOURCE()) \ + { \ + case RCC_USART3CLKSOURCE_PCLK1: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ + break; \ + case RCC_USART3CLKSOURCE_HSI: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ + break; \ + case RCC_USART3CLKSOURCE_SYSCLK: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \ + break; \ + case RCC_USART3CLKSOURCE_LSE: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ + break; \ + default: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ + break; \ + } \ + } \ + else if((__HANDLE__)->Instance == UART4) \ + { \ + switch(__HAL_RCC_GET_UART4_SOURCE()) \ + { \ + case RCC_UART4CLKSOURCE_PCLK1: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ + break; \ + case RCC_UART4CLKSOURCE_HSI: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ + break; \ + case RCC_UART4CLKSOURCE_SYSCLK: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \ + break; \ + case RCC_UART4CLKSOURCE_LSE: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ + break; \ + default: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ + break; \ + } \ + } \ + else if((__HANDLE__)->Instance == LPUART1) \ + { \ + switch(__HAL_RCC_GET_LPUART1_SOURCE()) \ + { \ + case RCC_LPUART1CLKSOURCE_PCLK1: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ + break; \ + case RCC_LPUART1CLKSOURCE_HSI: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ + break; \ + case RCC_LPUART1CLKSOURCE_SYSCLK: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \ + break; \ + case RCC_LPUART1CLKSOURCE_LSE: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ + break; \ + default: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ + break; \ + } \ + } \ + else \ + { \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ + } \ + } while(0U) +#endif /* STM32L471xx || STM32L475xx || STM32L476xx || STM32L485xx || STM32L486xx || + * STM32L496xx || STM32L4A6xx || + * STM32L4P5xx || STM32L4Q5xx || + * STM32L4R5xx || STM32L4R7xx || STM32L4R9xx || STM32L4S5xx || STM32L4S7xx || STM32L4S9xx + */ + +/** @brief Report the UART mask to apply to retrieve the received data + * according to the word length and to the parity bits activation. + * @note If PCE = 1, the parity bit is not included in the data extracted + * by the reception API(). + * This masking operation is not carried out in the case of + * DMA transfers. + * @param __HANDLE__ specifies the UART Handle. + * @retval None, the mask to apply to UART RDR register is stored in (__HANDLE__)->Mask field. + */ +#define UART_MASK_COMPUTATION(__HANDLE__) \ + do { \ + if ((__HANDLE__)->Init.WordLength == UART_WORDLENGTH_9B) \ + { \ + if ((__HANDLE__)->Init.Parity == UART_PARITY_NONE) \ + { \ + (__HANDLE__)->Mask = 0x01FFU ; \ + } \ + else \ + { \ + (__HANDLE__)->Mask = 0x00FFU ; \ + } \ + } \ + else if ((__HANDLE__)->Init.WordLength == UART_WORDLENGTH_8B) \ + { \ + if ((__HANDLE__)->Init.Parity == UART_PARITY_NONE) \ + { \ + (__HANDLE__)->Mask = 0x00FFU ; \ + } \ + else \ + { \ + (__HANDLE__)->Mask = 0x007FU ; \ + } \ + } \ + else if ((__HANDLE__)->Init.WordLength == UART_WORDLENGTH_7B) \ + { \ + if ((__HANDLE__)->Init.Parity == UART_PARITY_NONE) \ + { \ + (__HANDLE__)->Mask = 0x007FU ; \ + } \ + else \ + { \ + (__HANDLE__)->Mask = 0x003FU ; \ + } \ + } \ + else \ + { \ + (__HANDLE__)->Mask = 0x0000U; \ + } \ + } while(0U) + +/** + * @brief Ensure that UART frame length is valid. + * @param __LENGTH__ UART frame length. + * @retval SET (__LENGTH__ is valid) or RESET (__LENGTH__ is invalid) + */ +#define IS_UART_WORD_LENGTH(__LENGTH__) (((__LENGTH__) == UART_WORDLENGTH_7B) || \ + ((__LENGTH__) == UART_WORDLENGTH_8B) || \ + ((__LENGTH__) == UART_WORDLENGTH_9B)) + +/** + * @brief Ensure that UART wake-up address length is valid. + * @param __ADDRESS__ UART wake-up address length. + * @retval SET (__ADDRESS__ is valid) or RESET (__ADDRESS__ is invalid) + */ +#define IS_UART_ADDRESSLENGTH_DETECT(__ADDRESS__) (((__ADDRESS__) == UART_ADDRESS_DETECT_4B) || \ + ((__ADDRESS__) == UART_ADDRESS_DETECT_7B)) + +#if defined(USART_CR1_FIFOEN) +/** + * @brief Ensure that UART TXFIFO threshold level is valid. + * @param __THRESHOLD__ UART TXFIFO threshold level. + * @retval SET (__THRESHOLD__ is valid) or RESET (__THRESHOLD__ is invalid) + */ +#define IS_UART_TXFIFO_THRESHOLD(__THRESHOLD__) (((__THRESHOLD__) == UART_TXFIFO_THRESHOLD_1_8) || \ + ((__THRESHOLD__) == UART_TXFIFO_THRESHOLD_1_4) || \ + ((__THRESHOLD__) == UART_TXFIFO_THRESHOLD_1_2) || \ + ((__THRESHOLD__) == UART_TXFIFO_THRESHOLD_3_4) || \ + ((__THRESHOLD__) == UART_TXFIFO_THRESHOLD_7_8) || \ + ((__THRESHOLD__) == UART_TXFIFO_THRESHOLD_8_8)) + +/** + * @brief Ensure that UART RXFIFO threshold level is valid. + * @param __THRESHOLD__ UART RXFIFO threshold level. + * @retval SET (__THRESHOLD__ is valid) or RESET (__THRESHOLD__ is invalid) + */ +#define IS_UART_RXFIFO_THRESHOLD(__THRESHOLD__) (((__THRESHOLD__) == UART_RXFIFO_THRESHOLD_1_8) || \ + ((__THRESHOLD__) == UART_RXFIFO_THRESHOLD_1_4) || \ + ((__THRESHOLD__) == UART_RXFIFO_THRESHOLD_1_2) || \ + ((__THRESHOLD__) == UART_RXFIFO_THRESHOLD_3_4) || \ + ((__THRESHOLD__) == UART_RXFIFO_THRESHOLD_7_8) || \ + ((__THRESHOLD__) == UART_RXFIFO_THRESHOLD_8_8)) + +#endif /* USART_CR1_FIFOEN */ +/** + * @} + */ + +/* Private functions ---------------------------------------------------------*/ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32L4xx_HAL_UART_EX_H */ + diff --git a/CablePositioning_IAP_V1.0/Drivers/STM32L4xx_HAL_Driver/LICENSE.txt b/CablePositioning_IAP_V1.0/Drivers/STM32L4xx_HAL_Driver/LICENSE.txt index b40364c..3edc4d1 100644 --- a/CablePositioning_IAP_V1.0/Drivers/STM32L4xx_HAL_Driver/LICENSE.txt +++ b/CablePositioning_IAP_V1.0/Drivers/STM32L4xx_HAL_Driver/LICENSE.txt @@ -1,6 +1,6 @@ -This software component is provided to you as part of a software package and -applicable license terms are in the Package_license file. If you received this -software component outside of a package or without applicable license terms, -the terms of the BSD-3-Clause license shall apply. -You may obtain a copy of the BSD-3-Clause at: -https://opensource.org/licenses/BSD-3-Clause +This software component is provided to you as part of a software package and +applicable license terms are in the Package_license file. If you received this +software component outside of a package or without applicable license terms, +the terms of the BSD-3-Clause license shall apply. +You may obtain a copy of the BSD-3-Clause at: +https://opensource.org/licenses/BSD-3-Clause diff --git a/CablePositioning_IAP_V1.0/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.c b/CablePositioning_IAP_V1.0/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.c index 8adf663..9d0c693 100644 --- a/CablePositioning_IAP_V1.0/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.c +++ b/CablePositioning_IAP_V1.0/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.c @@ -1,764 +1,765 @@ -/** - ****************************************************************************** - * @file stm32l4xx_hal.c - * @author MCD Application Team - * @brief HAL module driver. - * This is the common part of the HAL initialization - * - ****************************************************************************** - * @attention - * - * Copyright (c) 2017 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - @verbatim - ============================================================================== - ##### How to use this driver ##### - ============================================================================== - [..] - The common HAL driver contains a set of generic and common APIs that can be - used by the PPP peripheral drivers and the user to start using the HAL. - [..] - The HAL contains two APIs' categories: - (+) Common HAL APIs - (+) Services HAL APIs - - @endverbatim - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32l4xx_hal.h" - -/** @addtogroup STM32L4xx_HAL_Driver - * @{ - */ - -/** @defgroup HAL HAL - * @brief HAL module driver - * @{ - */ - -#ifdef HAL_MODULE_ENABLED - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -/** - * @brief STM32L4xx HAL Driver version number - */ -#define STM32L4XX_HAL_VERSION_MAIN (0x01U) /*!< [31:24] main version */ -#define STM32L4XX_HAL_VERSION_SUB1 (0x0DU) /*!< [23:16] sub1 version */ -#define STM32L4XX_HAL_VERSION_SUB2 (0x03U) /*!< [15:8] sub2 version */ -#define STM32L4XX_HAL_VERSION_RC (0x00U) /*!< [7:0] release candidate */ -#define STM32L4XX_HAL_VERSION ((STM32L4XX_HAL_VERSION_MAIN << 24U)\ - |(STM32L4XX_HAL_VERSION_SUB1 << 16U)\ - |(STM32L4XX_HAL_VERSION_SUB2 << 8U)\ - |(STM32L4XX_HAL_VERSION_RC)) - -#if defined(VREFBUF) -#define VREFBUF_TIMEOUT_VALUE 10U /* 10 ms (to be confirmed) */ -#endif /* VREFBUF */ - -/* ------------ SYSCFG registers bit address in the alias region ------------ */ -#define SYSCFG_OFFSET (SYSCFG_BASE - PERIPH_BASE) -/* --- MEMRMP Register ---*/ -/* Alias word address of FB_MODE bit */ -#define MEMRMP_OFFSET SYSCFG_OFFSET -#define FB_MODE_BitNumber 8U -#define FB_MODE_BB (PERIPH_BB_BASE + (MEMRMP_OFFSET * 32U) + (FB_MODE_BitNumber * 4U)) - -/* --- SCSR Register ---*/ -/* Alias word address of SRAM2ER bit */ -#define SCSR_OFFSET (SYSCFG_OFFSET + 0x18U) -#define BRER_BitNumber 0U -#define SCSR_SRAM2ER_BB (PERIPH_BB_BASE + (SCSR_OFFSET * 32U) + (BRER_BitNumber * 4U)) - -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ - -/* Exported variables --------------------------------------------------------*/ - -/** @defgroup HAL_Exported_Variables HAL Exported Variables - * @{ - */ -__IO uint32_t uwTick; -uint32_t uwTickPrio = (1UL << __NVIC_PRIO_BITS); /* Invalid priority */ -HAL_TickFreqTypeDef uwTickFreq = HAL_TICK_FREQ_DEFAULT; /* 1KHz */ -/** - * @} - */ - -/* Exported functions --------------------------------------------------------*/ - -/** @defgroup HAL_Exported_Functions HAL Exported Functions - * @{ - */ - -/** @defgroup HAL_Exported_Functions_Group1 Initialization and de-initialization Functions - * @brief Initialization and de-initialization functions - * -@verbatim - =============================================================================== - ##### Initialization and de-initialization functions ##### - =============================================================================== - [..] This section provides functions allowing to: - (+) Initialize the Flash interface, the NVIC allocation and initial time base - clock configuration. - (+) De-initialize common part of the HAL. - (+) Configure the time base source to have 1ms time base with a dedicated - Tick interrupt priority. - (++) SysTick timer is used by default as source of time base, but user - can eventually implement his proper time base source (a general purpose - timer for example or other time source), keeping in mind that Time base - duration should be kept 1ms since PPP_TIMEOUT_VALUEs are defined and - handled in milliseconds basis. - (++) Time base configuration function (HAL_InitTick ()) is called automatically - at the beginning of the program after reset by HAL_Init() or at any time - when clock is configured, by HAL_RCC_ClockConfig(). - (++) Source of time base is configured to generate interrupts at regular - time intervals. Care must be taken if HAL_Delay() is called from a - peripheral ISR process, the Tick interrupt line must have higher priority - (numerically lower) than the peripheral interrupt. Otherwise the caller - ISR process will be blocked. - (++) functions affecting time base configurations are declared as __weak - to make override possible in case of other implementations in user file. -@endverbatim - * @{ - */ - -/** - * @brief Configure the Flash prefetch, the Instruction and Data caches, - * the time base source, NVIC and any required global low level hardware - * by calling the HAL_MspInit() callback function to be optionally defined in user file - * stm32l4xx_hal_msp.c. - * - * @note HAL_Init() function is called at the beginning of program after reset and before - * the clock configuration. - * - * @note In the default implementation the System Timer (Systick) is used as source of time base. - * The Systick configuration is based on MSI clock, as MSI is the clock - * used after a system Reset and the NVIC configuration is set to Priority group 4. - * Once done, time base tick starts incrementing: the tick variable counter is incremented - * each 1ms in the SysTick_Handler() interrupt handler. - * - * @retval HAL status - */ -HAL_StatusTypeDef HAL_Init(void) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Configure Flash prefetch, Instruction cache, Data cache */ - /* Default configuration at reset is: */ - /* - Prefetch disabled */ - /* - Instruction cache enabled */ - /* - Data cache enabled */ -#if (INSTRUCTION_CACHE_ENABLE == 0) - __HAL_FLASH_INSTRUCTION_CACHE_DISABLE(); -#endif /* INSTRUCTION_CACHE_ENABLE */ - -#if (DATA_CACHE_ENABLE == 0) - __HAL_FLASH_DATA_CACHE_DISABLE(); -#endif /* DATA_CACHE_ENABLE */ - -#if (PREFETCH_ENABLE != 0) - __HAL_FLASH_PREFETCH_BUFFER_ENABLE(); -#endif /* PREFETCH_ENABLE */ - - /* Set Interrupt Group Priority */ - HAL_NVIC_SetPriorityGrouping(NVIC_PRIORITYGROUP_4); - - /* Use SysTick as time base source and configure 1ms tick (default clock after Reset is MSI) */ - if (HAL_InitTick(TICK_INT_PRIORITY) != HAL_OK) - { - status = HAL_ERROR; - } - else - { - /* Init the low level hardware */ - HAL_MspInit(); - } - - /* Return function status */ - return status; -} - -/** - * @brief De-initialize common part of the HAL and stop the source of time base. - * @note This function is optional. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_DeInit(void) -{ - /* Reset of all peripherals */ - __HAL_RCC_APB1_FORCE_RESET(); - __HAL_RCC_APB1_RELEASE_RESET(); - - __HAL_RCC_APB2_FORCE_RESET(); - __HAL_RCC_APB2_RELEASE_RESET(); - - __HAL_RCC_AHB1_FORCE_RESET(); - __HAL_RCC_AHB1_RELEASE_RESET(); - - __HAL_RCC_AHB2_FORCE_RESET(); - __HAL_RCC_AHB2_RELEASE_RESET(); - - __HAL_RCC_AHB3_FORCE_RESET(); - __HAL_RCC_AHB3_RELEASE_RESET(); - - /* De-Init the low level hardware */ - HAL_MspDeInit(); - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Initialize the MSP. - * @retval None - */ -__weak void HAL_MspInit(void) -{ - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_MspInit could be implemented in the user file - */ -} - -/** - * @brief DeInitialize the MSP. - * @retval None - */ -__weak void HAL_MspDeInit(void) -{ - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_MspDeInit could be implemented in the user file - */ -} - -/** - * @brief This function configures the source of the time base: - * The time source is configured to have 1ms time base with a dedicated - * Tick interrupt priority. - * @note This function is called automatically at the beginning of program after - * reset by HAL_Init() or at any time when clock is reconfigured by HAL_RCC_ClockConfig(). - * @note In the default implementation, SysTick timer is the source of time base. - * It is used to generate interrupts at regular time intervals. - * Care must be taken if HAL_Delay() is called from a peripheral ISR process, - * The SysTick interrupt must have higher priority (numerically lower) - * than the peripheral interrupt. Otherwise the caller ISR process will be blocked. - * The function is declared as __weak to be overwritten in case of other - * implementation in user file. - * @param TickPriority Tick interrupt priority. - * @retval HAL status - */ -__weak HAL_StatusTypeDef HAL_InitTick(uint32_t TickPriority) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Check uwTickFreq for MisraC 2012 (even if uwTickFreq is a enum type that doesn't take the value zero)*/ - if ((uint32_t)uwTickFreq != 0U) - { - /*Configure the SysTick to have interrupt in 1ms time basis*/ - if (HAL_SYSTICK_Config(SystemCoreClock / (1000U / (uint32_t)uwTickFreq)) == 0U) - { - /* Configure the SysTick IRQ priority */ - if (TickPriority < (1UL << __NVIC_PRIO_BITS)) - { - HAL_NVIC_SetPriority(SysTick_IRQn, TickPriority, 0U); - uwTickPrio = TickPriority; - } - else - { - status = HAL_ERROR; - } - } - else - { - status = HAL_ERROR; - } - } - else - { - status = HAL_ERROR; - } - - /* Return function status */ - return status; -} - -/** - * @} - */ - -/** @defgroup HAL_Exported_Functions_Group2 HAL Control functions - * @brief HAL Control functions - * -@verbatim - =============================================================================== - ##### HAL Control functions ##### - =============================================================================== - [..] This section provides functions allowing to: - (+) Provide a tick value in millisecond - (+) Provide a blocking delay in millisecond - (+) Suspend the time base source interrupt - (+) Resume the time base source interrupt - (+) Get the HAL API driver version - (+) Get the device identifier - (+) Get the device revision identifier - -@endverbatim - * @{ - */ - -/** - * @brief This function is called to increment a global variable "uwTick" - * used as application time base. - * @note In the default implementation, this variable is incremented each 1ms - * in SysTick ISR. - * @note This function is declared as __weak to be overwritten in case of other - * implementations in user file. - * @retval None - */ -__weak void HAL_IncTick(void) -{ - uwTick += (uint32_t)uwTickFreq; -} - -/** - * @brief Provide a tick value in millisecond. - * @note This function is declared as __weak to be overwritten in case of other - * implementations in user file. - * @retval tick value - */ -__weak uint32_t HAL_GetTick(void) -{ - return uwTick; -} - -/** - * @brief This function returns a tick priority. - * @retval tick priority - */ -uint32_t HAL_GetTickPrio(void) -{ - return uwTickPrio; -} - -/** - * @brief Set new tick Freq. - * @param Freq tick frequency - * @retval HAL status - */ -HAL_StatusTypeDef HAL_SetTickFreq(HAL_TickFreqTypeDef Freq) -{ - HAL_StatusTypeDef status = HAL_OK; - HAL_TickFreqTypeDef prevTickFreq; - - if (uwTickFreq != Freq) - { - /* Back up uwTickFreq frequency */ - prevTickFreq = uwTickFreq; - - /* Update uwTickFreq global variable used by HAL_InitTick() */ - uwTickFreq = Freq; - - /* Apply the new tick Freq */ - status = HAL_InitTick(uwTickPrio); - if (status != HAL_OK) - { - /* Restore previous tick frequency */ - uwTickFreq = prevTickFreq; - } - } - - return status; -} - -/** - * @brief Return tick frequency. - * @retval tick period in Hz - */ -HAL_TickFreqTypeDef HAL_GetTickFreq(void) -{ - return uwTickFreq; -} - -/** - * @brief This function provides minimum delay (in milliseconds) based - * on variable incremented. - * @note In the default implementation , SysTick timer is the source of time base. - * It is used to generate interrupts at regular time intervals where uwTick - * is incremented. - * @note This function is declared as __weak to be overwritten in case of other - * implementations in user file. - * @param Delay specifies the delay time length, in milliseconds. - * @retval None - */ -__weak void HAL_Delay(uint32_t Delay) -{ - uint32_t tickstart = HAL_GetTick(); - uint32_t wait = Delay; - - /* Add a period to guaranty minimum wait */ - if (wait < HAL_MAX_DELAY) - { - wait += (uint32_t)uwTickFreq; - } - - while ((HAL_GetTick() - tickstart) < wait) - { - } -} - -/** - * @brief Suspend Tick increment. - * @note In the default implementation , SysTick timer is the source of time base. It is - * used to generate interrupts at regular time intervals. Once HAL_SuspendTick() - * is called, the SysTick interrupt will be disabled and so Tick increment - * is suspended. - * @note This function is declared as __weak to be overwritten in case of other - * implementations in user file. - * @retval None - */ -__weak void HAL_SuspendTick(void) -{ - /* Disable SysTick Interrupt */ - SysTick->CTRL &= ~SysTick_CTRL_TICKINT_Msk; -} - -/** - * @brief Resume Tick increment. - * @note In the default implementation , SysTick timer is the source of time base. It is - * used to generate interrupts at regular time intervals. Once HAL_ResumeTick() - * is called, the SysTick interrupt will be enabled and so Tick increment - * is resumed. - * @note This function is declared as __weak to be overwritten in case of other - * implementations in user file. - * @retval None - */ -__weak void HAL_ResumeTick(void) -{ - /* Enable SysTick Interrupt */ - SysTick->CTRL |= SysTick_CTRL_TICKINT_Msk; -} - -/** - * @brief Return the HAL revision. - * @retval version : 0xXYZR (8bits for each decimal, R for RC) - */ -uint32_t HAL_GetHalVersion(void) -{ - return STM32L4XX_HAL_VERSION; -} - -/** - * @brief Return the device revision identifier. - * @retval Device revision identifier - */ -uint32_t HAL_GetREVID(void) -{ - return((DBGMCU->IDCODE & DBGMCU_IDCODE_REV_ID) >> 16); -} - -/** - * @brief Return the device identifier. - * @retval Device identifier - */ -uint32_t HAL_GetDEVID(void) -{ - return(DBGMCU->IDCODE & DBGMCU_IDCODE_DEV_ID); -} - -/** - * @brief Return the first word of the unique device identifier (UID based on 96 bits) - * @retval Device identifier - */ -uint32_t HAL_GetUIDw0(void) -{ - return(READ_REG(*((uint32_t *)UID_BASE))); -} - -/** - * @brief Return the second word of the unique device identifier (UID based on 96 bits) - * @retval Device identifier - */ -uint32_t HAL_GetUIDw1(void) -{ - return(READ_REG(*((uint32_t *)(UID_BASE + 4U)))); -} - -/** - * @brief Return the third word of the unique device identifier (UID based on 96 bits) - * @retval Device identifier - */ -uint32_t HAL_GetUIDw2(void) -{ - return(READ_REG(*((uint32_t *)(UID_BASE + 8U)))); -} - -/** - * @} - */ - -/** @defgroup HAL_Exported_Functions_Group3 HAL Debug functions - * @brief HAL Debug functions - * -@verbatim - =============================================================================== - ##### HAL Debug functions ##### - =============================================================================== - [..] This section provides functions allowing to: - (+) Enable/Disable Debug module during SLEEP mode - (+) Enable/Disable Debug module during STOP0/STOP1/STOP2 modes - (+) Enable/Disable Debug module during STANDBY mode - -@endverbatim - * @{ - */ - -/** - * @brief Enable the Debug Module during SLEEP mode. - * @retval None - */ -void HAL_DBGMCU_EnableDBGSleepMode(void) -{ - SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_SLEEP); -} - -/** - * @brief Disable the Debug Module during SLEEP mode. - * @retval None - */ -void HAL_DBGMCU_DisableDBGSleepMode(void) -{ - CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_SLEEP); -} - -/** - * @brief Enable the Debug Module during STOP0/STOP1/STOP2 modes. - * @retval None - */ -void HAL_DBGMCU_EnableDBGStopMode(void) -{ - SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STOP); -} - -/** - * @brief Disable the Debug Module during STOP0/STOP1/STOP2 modes. - * @retval None - */ -void HAL_DBGMCU_DisableDBGStopMode(void) -{ - CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STOP); -} - -/** - * @brief Enable the Debug Module during STANDBY mode. - * @retval None - */ -void HAL_DBGMCU_EnableDBGStandbyMode(void) -{ - SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STANDBY); -} - -/** - * @brief Disable the Debug Module during STANDBY mode. - * @retval None - */ -void HAL_DBGMCU_DisableDBGStandbyMode(void) -{ - CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STANDBY); -} - -/** - * @} - */ - -/** @defgroup HAL_Exported_Functions_Group4 HAL SYSCFG configuration functions - * @brief HAL SYSCFG configuration functions - * -@verbatim - =============================================================================== - ##### HAL SYSCFG configuration functions ##### - =============================================================================== - [..] This section provides functions allowing to: - (+) Start a hardware SRAM2 erase operation - (+) Enable/Disable the Internal FLASH Bank Swapping - (+) Configure the Voltage reference buffer - (+) Enable/Disable the Voltage reference buffer - (+) Enable/Disable the I/O analog switch voltage booster - -@endverbatim - * @{ - */ - -/** - * @brief Start a hardware SRAM2 erase operation. - * @note As long as SRAM2 is not erased the SRAM2ER bit will be set. - * This bit is automatically reset at the end of the SRAM2 erase operation. - * @retval None - */ -void HAL_SYSCFG_SRAM2Erase(void) -{ - /* unlock the write protection of the SRAM2ER bit */ - SYSCFG->SKR = 0xCA; - SYSCFG->SKR = 0x53; - /* Starts a hardware SRAM2 erase operation*/ - *(__IO uint32_t *) SCSR_SRAM2ER_BB = 0x00000001UL; -} - -/** - * @brief Enable the Internal FLASH Bank Swapping. - * - * @note This function can be used only for STM32L4xx devices. - * - * @note Flash Bank2 mapped at 0x08000000 (and aliased @0x00000000) - * and Flash Bank1 mapped at 0x08100000 (and aliased at 0x00100000) - * - * @retval None - */ -void HAL_SYSCFG_EnableMemorySwappingBank(void) -{ - *(__IO uint32_t *)FB_MODE_BB = 0x00000001UL; -} - -/** - * @brief Disable the Internal FLASH Bank Swapping. - * - * @note This function can be used only for STM32L4xx devices. - * - * @note The default state : Flash Bank1 mapped at 0x08000000 (and aliased @0x0000 0000) - * and Flash Bank2 mapped at 0x08100000 (and aliased at 0x00100000) - * - * @retval None - */ -void HAL_SYSCFG_DisableMemorySwappingBank(void) -{ - - *(__IO uint32_t *)FB_MODE_BB = 0x00000000UL; -} - -#if defined(VREFBUF) -/** - * @brief Configure the internal voltage reference buffer voltage scale. - * @param VoltageScaling specifies the output voltage to achieve - * This parameter can be one of the following values: - * @arg SYSCFG_VREFBUF_VOLTAGE_SCALE0: VREF_OUT1 around 2.048 V. - * This requires VDDA equal to or higher than 2.4 V. - * @arg SYSCFG_VREFBUF_VOLTAGE_SCALE1: VREF_OUT2 around 2.5 V. - * This requires VDDA equal to or higher than 2.8 V. - * @retval None - */ -void HAL_SYSCFG_VREFBUF_VoltageScalingConfig(uint32_t VoltageScaling) -{ - /* Check the parameters */ - assert_param(IS_SYSCFG_VREFBUF_VOLTAGE_SCALE(VoltageScaling)); - - MODIFY_REG(VREFBUF->CSR, VREFBUF_CSR_VRS, VoltageScaling); -} - -/** - * @brief Configure the internal voltage reference buffer high impedance mode. - * @param Mode specifies the high impedance mode - * This parameter can be one of the following values: - * @arg SYSCFG_VREFBUF_HIGH_IMPEDANCE_DISABLE: VREF+ pin is internally connect to VREFINT output. - * @arg SYSCFG_VREFBUF_HIGH_IMPEDANCE_ENABLE: VREF+ pin is high impedance. - * @retval None - */ -void HAL_SYSCFG_VREFBUF_HighImpedanceConfig(uint32_t Mode) -{ - /* Check the parameters */ - assert_param(IS_SYSCFG_VREFBUF_HIGH_IMPEDANCE(Mode)); - - MODIFY_REG(VREFBUF->CSR, VREFBUF_CSR_HIZ, Mode); -} - -/** - * @brief Tune the Internal Voltage Reference buffer (VREFBUF). - * @retval None - */ -void HAL_SYSCFG_VREFBUF_TrimmingConfig(uint32_t TrimmingValue) -{ - /* Check the parameters */ - assert_param(IS_SYSCFG_VREFBUF_TRIMMING(TrimmingValue)); - - MODIFY_REG(VREFBUF->CCR, VREFBUF_CCR_TRIM, TrimmingValue); -} - -/** - * @brief Enable the Internal Voltage Reference buffer (VREFBUF). - * @retval HAL_OK/HAL_TIMEOUT - */ -HAL_StatusTypeDef HAL_SYSCFG_EnableVREFBUF(void) -{ - uint32_t tickstart; - - SET_BIT(VREFBUF->CSR, VREFBUF_CSR_ENVR); - - /* Get Start Tick*/ - tickstart = HAL_GetTick(); - - /* Wait for VRR bit */ - while(READ_BIT(VREFBUF->CSR, VREFBUF_CSR_VRR) == 0U) - { - if((HAL_GetTick() - tickstart) > VREFBUF_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - - return HAL_OK; -} - -/** - * @brief Disable the Internal Voltage Reference buffer (VREFBUF). - * - * @retval None - */ -void HAL_SYSCFG_DisableVREFBUF(void) -{ - CLEAR_BIT(VREFBUF->CSR, VREFBUF_CSR_ENVR); -} -#endif /* VREFBUF */ - -/** - * @brief Enable the I/O analog switch voltage booster - * - * @retval None - */ -void HAL_SYSCFG_EnableIOAnalogSwitchBooster(void) -{ - SET_BIT(SYSCFG->CFGR1, SYSCFG_CFGR1_BOOSTEN); -} - -/** - * @brief Disable the I/O analog switch voltage booster - * - * @retval None - */ -void HAL_SYSCFG_DisableIOAnalogSwitchBooster(void) -{ - CLEAR_BIT(SYSCFG->CFGR1, SYSCFG_CFGR1_BOOSTEN); -} - -/** - * @} - */ - -/** - * @} - */ - -#endif /* HAL_MODULE_ENABLED */ -/** - * @} - */ - -/** - * @} - */ +/** + ****************************************************************************** + * @file stm32l4xx_hal.c + * @author MCD Application Team + * @brief HAL module driver. + * This is the common part of the HAL initialization + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + The common HAL driver contains a set of generic and common APIs that can be + used by the PPP peripheral drivers and the user to start using the HAL. + [..] + The HAL contains two APIs' categories: + (+) Common HAL APIs + (+) Services HAL APIs + + @endverbatim + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l4xx_hal.h" + +/** @addtogroup STM32L4xx_HAL_Driver + * @{ + */ + +/** @defgroup HAL HAL + * @brief HAL module driver + * @{ + */ + +#ifdef HAL_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/** + * @brief STM32L4xx HAL Driver version number + */ +#define STM32L4XX_HAL_VERSION_MAIN (0x01U) /*!< [31:24] main version */ +#define STM32L4XX_HAL_VERSION_SUB1 (0x0DU) /*!< [23:16] sub1 version */ +#define STM32L4XX_HAL_VERSION_SUB2 (0x05U) /*!< [15:8] sub2 version */ +#define STM32L4XX_HAL_VERSION_RC (0x00U) /*!< [7:0] release candidate */ +#define STM32L4XX_HAL_VERSION ((STM32L4XX_HAL_VERSION_MAIN << 24U)\ + |(STM32L4XX_HAL_VERSION_SUB1 << 16U)\ + |(STM32L4XX_HAL_VERSION_SUB2 << 8U)\ + |(STM32L4XX_HAL_VERSION_RC)) + +#if defined(VREFBUF) +#define VREFBUF_TIMEOUT_VALUE 10U /* 10 ms (to be confirmed) */ +#endif /* VREFBUF */ + +/* ------------ SYSCFG registers bit address in the alias region ------------ */ +#define SYSCFG_OFFSET (SYSCFG_BASE - PERIPH_BASE) +/* --- MEMRMP Register ---*/ +/* Alias word address of FB_MODE bit */ +#define MEMRMP_OFFSET SYSCFG_OFFSET +#define FB_MODE_BitNumber 8U +#define FB_MODE_BB (PERIPH_BB_BASE + (MEMRMP_OFFSET * 32U) + (FB_MODE_BitNumber * 4U)) + +/* --- SCSR Register ---*/ +/* Alias word address of SRAM2ER bit */ +#define SCSR_OFFSET (SYSCFG_OFFSET + 0x18U) +#define BRER_BitNumber 0U +#define SCSR_SRAM2ER_BB (PERIPH_BB_BASE + (SCSR_OFFSET * 32U) + (BRER_BitNumber * 4U)) + +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ + +/* Exported variables --------------------------------------------------------*/ + +/** @defgroup HAL_Exported_Variables HAL Exported Variables + * @{ + */ +__IO uint32_t uwTick; +uint32_t uwTickPrio = (1UL << __NVIC_PRIO_BITS); /* Invalid priority */ +HAL_TickFreqTypeDef uwTickFreq = HAL_TICK_FREQ_DEFAULT; /* 1KHz */ +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup HAL_Exported_Functions HAL Exported Functions + * @{ + */ + +/** @defgroup HAL_Exported_Functions_Group1 Initialization and de-initialization Functions + * @brief Initialization and de-initialization functions + * +@verbatim + =============================================================================== + ##### Initialization and de-initialization functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Initialize the Flash interface, the NVIC allocation and initial time base + clock configuration. + (+) De-initialize common part of the HAL. + (+) Configure the time base source to have 1ms time base with a dedicated + Tick interrupt priority. + (++) SysTick timer is used by default as source of time base, but user + can eventually implement his proper time base source (a general purpose + timer for example or other time source), keeping in mind that Time base + duration should be kept 1ms since PPP_TIMEOUT_VALUEs are defined and + handled in milliseconds basis. + (++) Time base configuration function (HAL_InitTick ()) is called automatically + at the beginning of the program after reset by HAL_Init() or at any time + when clock is configured, by HAL_RCC_ClockConfig(). + (++) Source of time base is configured to generate interrupts at regular + time intervals. Care must be taken if HAL_Delay() is called from a + peripheral ISR process, the Tick interrupt line must have higher priority + (numerically lower) than the peripheral interrupt. Otherwise the caller + ISR process will be blocked. + (++) functions affecting time base configurations are declared as __weak + to make override possible in case of other implementations in user file. +@endverbatim + * @{ + */ + +/** + * @brief Configure the Flash prefetch, the Instruction and Data caches, + * the time base source, NVIC and any required global low level hardware + * by calling the HAL_MspInit() callback function to be optionally defined in user file + * stm32l4xx_hal_msp.c. + * + * @note HAL_Init() function is called at the beginning of program after reset and before + * the clock configuration. + * + * @note In the default implementation the System Timer (Systick) is used as source of time base. + * The Systick configuration is based on MSI clock, as MSI is the clock + * used after a system Reset and the NVIC configuration is set to Priority group 4. + * Once done, time base tick starts incrementing: the tick variable counter is incremented + * each 1ms in the SysTick_Handler() interrupt handler. + * + * @retval HAL status + */ +HAL_StatusTypeDef HAL_Init(void) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Configure Flash prefetch, Instruction cache, Data cache */ + /* Default configuration at reset is: */ + /* - Prefetch disabled */ + /* - Instruction cache enabled */ + /* - Data cache enabled */ +#if (INSTRUCTION_CACHE_ENABLE == 0) + __HAL_FLASH_INSTRUCTION_CACHE_DISABLE(); +#endif /* INSTRUCTION_CACHE_ENABLE */ + +#if (DATA_CACHE_ENABLE == 0) + __HAL_FLASH_DATA_CACHE_DISABLE(); +#endif /* DATA_CACHE_ENABLE */ + +#if (PREFETCH_ENABLE != 0) + __HAL_FLASH_PREFETCH_BUFFER_ENABLE(); +#endif /* PREFETCH_ENABLE */ + + /* Set Interrupt Group Priority */ + HAL_NVIC_SetPriorityGrouping(NVIC_PRIORITYGROUP_4); + + /* Use SysTick as time base source and configure 1ms tick (default clock after Reset is MSI) */ + if (HAL_InitTick(TICK_INT_PRIORITY) != HAL_OK) + { + status = HAL_ERROR; + } + else + { + /* Init the low level hardware */ + HAL_MspInit(); + } + + /* Return function status */ + return status; +} + +/** + * @brief De-initialize common part of the HAL and stop the source of time base. + * @note This function is optional. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DeInit(void) +{ + /* Reset of all peripherals */ + __HAL_RCC_APB1_FORCE_RESET(); + __HAL_RCC_APB1_RELEASE_RESET(); + + __HAL_RCC_APB2_FORCE_RESET(); + __HAL_RCC_APB2_RELEASE_RESET(); + + __HAL_RCC_AHB1_FORCE_RESET(); + __HAL_RCC_AHB1_RELEASE_RESET(); + + __HAL_RCC_AHB2_FORCE_RESET(); + __HAL_RCC_AHB2_RELEASE_RESET(); + + __HAL_RCC_AHB3_FORCE_RESET(); + __HAL_RCC_AHB3_RELEASE_RESET(); + + /* De-Init the low level hardware */ + HAL_MspDeInit(); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Initialize the MSP. + * @retval None + */ +__weak void HAL_MspInit(void) +{ + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_MspInit could be implemented in the user file + */ +} + +/** + * @brief DeInitialize the MSP. + * @retval None + */ +__weak void HAL_MspDeInit(void) +{ + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_MspDeInit could be implemented in the user file + */ +} + +/** + * @brief This function configures the source of the time base: + * The time source is configured to have 1ms time base with a dedicated + * Tick interrupt priority. + * @note This function is called automatically at the beginning of program after + * reset by HAL_Init() or at any time when clock is reconfigured by HAL_RCC_ClockConfig(). + * @note In the default implementation, SysTick timer is the source of time base. + * It is used to generate interrupts at regular time intervals. + * Care must be taken if HAL_Delay() is called from a peripheral ISR process, + * The SysTick interrupt must have higher priority (numerically lower) + * than the peripheral interrupt. Otherwise the caller ISR process will be blocked. + * The function is declared as __weak to be overwritten in case of other + * implementation in user file. + * @param TickPriority Tick interrupt priority. + * @retval HAL status + */ +__weak HAL_StatusTypeDef HAL_InitTick(uint32_t TickPriority) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check uwTickFreq for MisraC 2012 (even if uwTickFreq is a enum type that doesn't take the value zero)*/ + if ((uint32_t)uwTickFreq != 0U) + { + /*Configure the SysTick to have interrupt in 1ms time basis*/ + if (HAL_SYSTICK_Config(SystemCoreClock / (1000U / (uint32_t)uwTickFreq)) == 0U) + { + /* Configure the SysTick IRQ priority */ + if (TickPriority < (1UL << __NVIC_PRIO_BITS)) + { + HAL_NVIC_SetPriority(SysTick_IRQn, TickPriority, 0U); + uwTickPrio = TickPriority; + } + else + { + status = HAL_ERROR; + } + } + else + { + status = HAL_ERROR; + } + } + else + { + status = HAL_ERROR; + } + + /* Return function status */ + return status; +} + +/** + * @} + */ + +/** @defgroup HAL_Exported_Functions_Group2 HAL Control functions + * @brief HAL Control functions + * +@verbatim + =============================================================================== + ##### HAL Control functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Provide a tick value in millisecond + (+) Provide a blocking delay in millisecond + (+) Suspend the time base source interrupt + (+) Resume the time base source interrupt + (+) Get the HAL API driver version + (+) Get the device identifier + (+) Get the device revision identifier + +@endverbatim + * @{ + */ + +/** + * @brief This function is called to increment a global variable "uwTick" + * used as application time base. + * @note In the default implementation, this variable is incremented each 1ms + * in SysTick ISR. + * @note This function is declared as __weak to be overwritten in case of other + * implementations in user file. + * @retval None + */ +__weak void HAL_IncTick(void) +{ + uwTick += (uint32_t)uwTickFreq; +} + +/** + * @brief Provide a tick value in millisecond. + * @note This function is declared as __weak to be overwritten in case of other + * implementations in user file. + * @retval tick value + */ +__weak uint32_t HAL_GetTick(void) +{ + return uwTick; +} + +/** + * @brief This function returns a tick priority. + * @retval tick priority + */ +uint32_t HAL_GetTickPrio(void) +{ + return uwTickPrio; +} + +/** + * @brief Set new tick Freq. + * @param Freq tick frequency + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SetTickFreq(HAL_TickFreqTypeDef Freq) +{ + HAL_StatusTypeDef status = HAL_OK; + HAL_TickFreqTypeDef prevTickFreq; + + if (uwTickFreq != Freq) + { + /* Back up uwTickFreq frequency */ + prevTickFreq = uwTickFreq; + + /* Update uwTickFreq global variable used by HAL_InitTick() */ + uwTickFreq = Freq; + + /* Apply the new tick Freq */ + status = HAL_InitTick(uwTickPrio); + if (status != HAL_OK) + { + /* Restore previous tick frequency */ + uwTickFreq = prevTickFreq; + } + } + + return status; +} + +/** + * @brief Return tick frequency. + * @retval Tick frequency. + * Value of @ref HAL_TickFreqTypeDef. + */ +HAL_TickFreqTypeDef HAL_GetTickFreq(void) +{ + return uwTickFreq; +} + +/** + * @brief This function provides minimum delay (in milliseconds) based + * on variable incremented. + * @note In the default implementation , SysTick timer is the source of time base. + * It is used to generate interrupts at regular time intervals where uwTick + * is incremented. + * @note This function is declared as __weak to be overwritten in case of other + * implementations in user file. + * @param Delay specifies the delay time length, in milliseconds. + * @retval None + */ +__weak void HAL_Delay(uint32_t Delay) +{ + uint32_t tickstart = HAL_GetTick(); + uint32_t wait = Delay; + + /* Add a period to guaranty minimum wait */ + if (wait < HAL_MAX_DELAY) + { + wait += (uint32_t)uwTickFreq; + } + + while ((HAL_GetTick() - tickstart) < wait) + { + } +} + +/** + * @brief Suspend Tick increment. + * @note In the default implementation , SysTick timer is the source of time base. It is + * used to generate interrupts at regular time intervals. Once HAL_SuspendTick() + * is called, the SysTick interrupt will be disabled and so Tick increment + * is suspended. + * @note This function is declared as __weak to be overwritten in case of other + * implementations in user file. + * @retval None + */ +__weak void HAL_SuspendTick(void) +{ + /* Disable SysTick Interrupt */ + SysTick->CTRL &= ~SysTick_CTRL_TICKINT_Msk; +} + +/** + * @brief Resume Tick increment. + * @note In the default implementation , SysTick timer is the source of time base. It is + * used to generate interrupts at regular time intervals. Once HAL_ResumeTick() + * is called, the SysTick interrupt will be enabled and so Tick increment + * is resumed. + * @note This function is declared as __weak to be overwritten in case of other + * implementations in user file. + * @retval None + */ +__weak void HAL_ResumeTick(void) +{ + /* Enable SysTick Interrupt */ + SysTick->CTRL |= SysTick_CTRL_TICKINT_Msk; +} + +/** + * @brief Return the HAL revision. + * @retval version : 0xXYZR (8bits for each decimal, R for RC) + */ +uint32_t HAL_GetHalVersion(void) +{ + return STM32L4XX_HAL_VERSION; +} + +/** + * @brief Return the device revision identifier. + * @retval Device revision identifier + */ +uint32_t HAL_GetREVID(void) +{ + return((DBGMCU->IDCODE & DBGMCU_IDCODE_REV_ID) >> 16); +} + +/** + * @brief Return the device identifier. + * @retval Device identifier + */ +uint32_t HAL_GetDEVID(void) +{ + return(DBGMCU->IDCODE & DBGMCU_IDCODE_DEV_ID); +} + +/** + * @brief Return the first word of the unique device identifier (UID based on 96 bits) + * @retval Device identifier + */ +uint32_t HAL_GetUIDw0(void) +{ + return(READ_REG(*((uint32_t *)UID_BASE))); +} + +/** + * @brief Return the second word of the unique device identifier (UID based on 96 bits) + * @retval Device identifier + */ +uint32_t HAL_GetUIDw1(void) +{ + return(READ_REG(*((uint32_t *)(UID_BASE + 4U)))); +} + +/** + * @brief Return the third word of the unique device identifier (UID based on 96 bits) + * @retval Device identifier + */ +uint32_t HAL_GetUIDw2(void) +{ + return(READ_REG(*((uint32_t *)(UID_BASE + 8U)))); +} + +/** + * @} + */ + +/** @defgroup HAL_Exported_Functions_Group3 HAL Debug functions + * @brief HAL Debug functions + * +@verbatim + =============================================================================== + ##### HAL Debug functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Enable/Disable Debug module during SLEEP mode + (+) Enable/Disable Debug module during STOP0/STOP1/STOP2 modes + (+) Enable/Disable Debug module during STANDBY mode + +@endverbatim + * @{ + */ + +/** + * @brief Enable the Debug Module during SLEEP mode. + * @retval None + */ +void HAL_DBGMCU_EnableDBGSleepMode(void) +{ + SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_SLEEP); +} + +/** + * @brief Disable the Debug Module during SLEEP mode. + * @retval None + */ +void HAL_DBGMCU_DisableDBGSleepMode(void) +{ + CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_SLEEP); +} + +/** + * @brief Enable the Debug Module during STOP0/STOP1/STOP2 modes. + * @retval None + */ +void HAL_DBGMCU_EnableDBGStopMode(void) +{ + SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STOP); +} + +/** + * @brief Disable the Debug Module during STOP0/STOP1/STOP2 modes. + * @retval None + */ +void HAL_DBGMCU_DisableDBGStopMode(void) +{ + CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STOP); +} + +/** + * @brief Enable the Debug Module during STANDBY mode. + * @retval None + */ +void HAL_DBGMCU_EnableDBGStandbyMode(void) +{ + SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STANDBY); +} + +/** + * @brief Disable the Debug Module during STANDBY mode. + * @retval None + */ +void HAL_DBGMCU_DisableDBGStandbyMode(void) +{ + CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STANDBY); +} + +/** + * @} + */ + +/** @defgroup HAL_Exported_Functions_Group4 HAL SYSCFG configuration functions + * @brief HAL SYSCFG configuration functions + * +@verbatim + =============================================================================== + ##### HAL SYSCFG configuration functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Start a hardware SRAM2 erase operation + (+) Enable/Disable the Internal FLASH Bank Swapping + (+) Configure the Voltage reference buffer + (+) Enable/Disable the Voltage reference buffer + (+) Enable/Disable the I/O analog switch voltage booster + +@endverbatim + * @{ + */ + +/** + * @brief Start a hardware SRAM2 erase operation. + * @note As long as SRAM2 is not erased the SRAM2ER bit will be set. + * This bit is automatically reset at the end of the SRAM2 erase operation. + * @retval None + */ +void HAL_SYSCFG_SRAM2Erase(void) +{ + /* unlock the write protection of the SRAM2ER bit */ + SYSCFG->SKR = 0xCA; + SYSCFG->SKR = 0x53; + /* Starts a hardware SRAM2 erase operation*/ + *(__IO uint32_t *) SCSR_SRAM2ER_BB = 0x00000001UL; +} + +/** + * @brief Enable the Internal FLASH Bank Swapping. + * + * @note This function can be used only for STM32L4xx devices. + * + * @note Flash Bank2 mapped at 0x08000000 (and aliased @0x00000000) + * and Flash Bank1 mapped at 0x08100000 (and aliased at 0x00100000) + * + * @retval None + */ +void HAL_SYSCFG_EnableMemorySwappingBank(void) +{ + *(__IO uint32_t *)FB_MODE_BB = 0x00000001UL; +} + +/** + * @brief Disable the Internal FLASH Bank Swapping. + * + * @note This function can be used only for STM32L4xx devices. + * + * @note The default state : Flash Bank1 mapped at 0x08000000 (and aliased @0x0000 0000) + * and Flash Bank2 mapped at 0x08100000 (and aliased at 0x00100000) + * + * @retval None + */ +void HAL_SYSCFG_DisableMemorySwappingBank(void) +{ + + *(__IO uint32_t *)FB_MODE_BB = 0x00000000UL; +} + +#if defined(VREFBUF) +/** + * @brief Configure the internal voltage reference buffer voltage scale. + * @param VoltageScaling specifies the output voltage to achieve + * This parameter can be one of the following values: + * @arg SYSCFG_VREFBUF_VOLTAGE_SCALE0: VREF_OUT1 around 2.048 V. + * This requires VDDA equal to or higher than 2.4 V. + * @arg SYSCFG_VREFBUF_VOLTAGE_SCALE1: VREF_OUT2 around 2.5 V. + * This requires VDDA equal to or higher than 2.8 V. + * @retval None + */ +void HAL_SYSCFG_VREFBUF_VoltageScalingConfig(uint32_t VoltageScaling) +{ + /* Check the parameters */ + assert_param(IS_SYSCFG_VREFBUF_VOLTAGE_SCALE(VoltageScaling)); + + MODIFY_REG(VREFBUF->CSR, VREFBUF_CSR_VRS, VoltageScaling); +} + +/** + * @brief Configure the internal voltage reference buffer high impedance mode. + * @param Mode specifies the high impedance mode + * This parameter can be one of the following values: + * @arg SYSCFG_VREFBUF_HIGH_IMPEDANCE_DISABLE: VREF+ pin is internally connect to VREFINT output. + * @arg SYSCFG_VREFBUF_HIGH_IMPEDANCE_ENABLE: VREF+ pin is high impedance. + * @retval None + */ +void HAL_SYSCFG_VREFBUF_HighImpedanceConfig(uint32_t Mode) +{ + /* Check the parameters */ + assert_param(IS_SYSCFG_VREFBUF_HIGH_IMPEDANCE(Mode)); + + MODIFY_REG(VREFBUF->CSR, VREFBUF_CSR_HIZ, Mode); +} + +/** + * @brief Tune the Internal Voltage Reference buffer (VREFBUF). + * @retval None + */ +void HAL_SYSCFG_VREFBUF_TrimmingConfig(uint32_t TrimmingValue) +{ + /* Check the parameters */ + assert_param(IS_SYSCFG_VREFBUF_TRIMMING(TrimmingValue)); + + MODIFY_REG(VREFBUF->CCR, VREFBUF_CCR_TRIM, TrimmingValue); +} + +/** + * @brief Enable the Internal Voltage Reference buffer (VREFBUF). + * @retval HAL_OK/HAL_TIMEOUT + */ +HAL_StatusTypeDef HAL_SYSCFG_EnableVREFBUF(void) +{ + uint32_t tickstart; + + SET_BIT(VREFBUF->CSR, VREFBUF_CSR_ENVR); + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait for VRR bit */ + while(READ_BIT(VREFBUF->CSR, VREFBUF_CSR_VRR) == 0U) + { + if((HAL_GetTick() - tickstart) > VREFBUF_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + + return HAL_OK; +} + +/** + * @brief Disable the Internal Voltage Reference buffer (VREFBUF). + * + * @retval None + */ +void HAL_SYSCFG_DisableVREFBUF(void) +{ + CLEAR_BIT(VREFBUF->CSR, VREFBUF_CSR_ENVR); +} +#endif /* VREFBUF */ + +/** + * @brief Enable the I/O analog switch voltage booster + * + * @retval None + */ +void HAL_SYSCFG_EnableIOAnalogSwitchBooster(void) +{ + SET_BIT(SYSCFG->CFGR1, SYSCFG_CFGR1_BOOSTEN); +} + +/** + * @brief Disable the I/O analog switch voltage booster + * + * @retval None + */ +void HAL_SYSCFG_DisableIOAnalogSwitchBooster(void) +{ + CLEAR_BIT(SYSCFG->CFGR1, SYSCFG_CFGR1_BOOSTEN); +} + +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ diff --git a/CablePositioning_IAP_V1.0/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.c b/CablePositioning_IAP_V1.0/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.c index 1e662cd..0b94bbd 100644 --- a/CablePositioning_IAP_V1.0/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.c +++ b/CablePositioning_IAP_V1.0/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.c @@ -1,517 +1,541 @@ -/** - ****************************************************************************** - * @file stm32l4xx_hal_cortex.c - * @author MCD Application Team - * @brief CORTEX HAL module driver. - * This file provides firmware functions to manage the following - * functionalities of the CORTEX: - * + Initialization and Configuration functions - * + Peripheral Control functions - * - @verbatim - ============================================================================== - ##### How to use this driver ##### - ============================================================================== - - [..] - *** How to configure Interrupts using CORTEX HAL driver *** - =========================================================== - [..] - This section provides functions allowing to configure the NVIC interrupts (IRQ). - The Cortex-M4 exceptions are managed by CMSIS functions. - - (#) Configure the NVIC Priority Grouping using HAL_NVIC_SetPriorityGrouping() function. - (#) Configure the priority of the selected IRQ Channels using HAL_NVIC_SetPriority(). - (#) Enable the selected IRQ Channels using HAL_NVIC_EnableIRQ(). - - -@- When the NVIC_PRIORITYGROUP_0 is selected, IRQ pre-emption is no more possible. - The pending IRQ priority will be managed only by the sub priority. - - -@- IRQ priority order (sorted by highest to lowest priority): - (+@) Lowest pre-emption priority - (+@) Lowest sub priority - (+@) Lowest hardware priority (IRQ number) - - [..] - *** How to configure SysTick using CORTEX HAL driver *** - ======================================================== - [..] - Setup SysTick Timer for time base. - - (+) The HAL_SYSTICK_Config() function calls the SysTick_Config() function which - is a CMSIS function that: - (++) Configures the SysTick Reload register with value passed as function parameter. - (++) Configures the SysTick IRQ priority to the lowest value (0x0F). - (++) Resets the SysTick Counter register. - (++) Configures the SysTick Counter clock source to be Core Clock Source (HCLK). - (++) Enables the SysTick Interrupt. - (++) Starts the SysTick Counter. - - (+) You can change the SysTick Clock source to be HCLK_Div8 by calling the macro - __HAL_CORTEX_SYSTICKCLK_CONFIG(SYSTICK_CLKSOURCE_HCLK_DIV8) just after the - HAL_SYSTICK_Config() function call. The __HAL_CORTEX_SYSTICKCLK_CONFIG() macro is defined - inside the stm32l4xx_hal_cortex.h file. - - (+) You can change the SysTick IRQ priority by calling the - HAL_NVIC_SetPriority(SysTick_IRQn,...) function just after the HAL_SYSTICK_Config() function - call. The HAL_NVIC_SetPriority() call the NVIC_SetPriority() function which is a CMSIS function. - - (+) To adjust the SysTick time base, use the following formula: - - Reload Value = SysTick Counter Clock (Hz) x Desired Time base (s) - (++) Reload Value is the parameter to be passed for HAL_SYSTICK_Config() function - (++) Reload Value should not exceed 0xFFFFFF - - @endverbatim - ****************************************************************************** - - The table below gives the allowed values of the pre-emption priority and subpriority according - to the Priority Grouping configuration performed by HAL_NVIC_SetPriorityGrouping() function. - - ========================================================================================================================== - NVIC_PriorityGroup | NVIC_IRQChannelPreemptionPriority | NVIC_IRQChannelSubPriority | Description - ========================================================================================================================== - NVIC_PRIORITYGROUP_0 | 0 | 0-15 | 0 bit for pre-emption priority - | | | 4 bits for subpriority - -------------------------------------------------------------------------------------------------------------------------- - NVIC_PRIORITYGROUP_1 | 0-1 | 0-7 | 1 bit for pre-emption priority - | | | 3 bits for subpriority - -------------------------------------------------------------------------------------------------------------------------- - NVIC_PRIORITYGROUP_2 | 0-3 | 0-3 | 2 bits for pre-emption priority - | | | 2 bits for subpriority - -------------------------------------------------------------------------------------------------------------------------- - NVIC_PRIORITYGROUP_3 | 0-7 | 0-1 | 3 bits for pre-emption priority - | | | 1 bit for subpriority - -------------------------------------------------------------------------------------------------------------------------- - NVIC_PRIORITYGROUP_4 | 0-15 | 0 | 4 bits for pre-emption priority - | | | 0 bit for subpriority - ========================================================================================================================== - - ****************************************************************************** - * @attention - * - * Copyright (c) 2017 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file in - * the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32l4xx_hal.h" - -/** @addtogroup STM32L4xx_HAL_Driver - * @{ - */ - -/** @addtogroup CORTEX - * @{ - */ - -#ifdef HAL_CORTEX_MODULE_ENABLED - -/* Private types -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private constants ---------------------------------------------------------*/ -/* Private macros ------------------------------------------------------------*/ -/* Private functions ---------------------------------------------------------*/ -/* Exported functions --------------------------------------------------------*/ - -/** @addtogroup CORTEX_Exported_Functions - * @{ - */ - - -/** @addtogroup CORTEX_Exported_Functions_Group1 - * @brief Initialization and Configuration functions - * -@verbatim - ============================================================================== - ##### Initialization and Configuration functions ##### - ============================================================================== - [..] - This section provides the CORTEX HAL driver functions allowing to configure Interrupts - SysTick functionalities - -@endverbatim - * @{ - */ - - -/** - * @brief Set the priority grouping field (pre-emption priority and subpriority) - * using the required unlock sequence. - * @param PriorityGroup: The priority grouping bits length. - * This parameter can be one of the following values: - * @arg NVIC_PRIORITYGROUP_0: 0 bit for pre-emption priority, - * 4 bits for subpriority - * @arg NVIC_PRIORITYGROUP_1: 1 bit for pre-emption priority, - * 3 bits for subpriority - * @arg NVIC_PRIORITYGROUP_2: 2 bits for pre-emption priority, - * 2 bits for subpriority - * @arg NVIC_PRIORITYGROUP_3: 3 bits for pre-emption priority, - * 1 bit for subpriority - * @arg NVIC_PRIORITYGROUP_4: 4 bits for pre-emption priority, - * 0 bit for subpriority - * @note When the NVIC_PriorityGroup_0 is selected, IRQ pre-emption is no more possible. - * The pending IRQ priority will be managed only by the subpriority. - * @retval None - */ -void HAL_NVIC_SetPriorityGrouping(uint32_t PriorityGroup) -{ - /* Check the parameters */ - assert_param(IS_NVIC_PRIORITY_GROUP(PriorityGroup)); - - /* Set the PRIGROUP[10:8] bits according to the PriorityGroup parameter value */ - NVIC_SetPriorityGrouping(PriorityGroup); -} - -/** - * @brief Set the priority of an interrupt. - * @param IRQn: External interrupt number. - * This parameter can be an enumerator of IRQn_Type enumeration - * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32l4xxxx.h)) - * @param PreemptPriority: The pre-emption priority for the IRQn channel. - * This parameter can be a value between 0 and 15 - * A lower priority value indicates a higher priority - * @param SubPriority: the subpriority level for the IRQ channel. - * This parameter can be a value between 0 and 15 - * A lower priority value indicates a higher priority. - * @retval None - */ -void HAL_NVIC_SetPriority(IRQn_Type IRQn, uint32_t PreemptPriority, uint32_t SubPriority) -{ - uint32_t prioritygroup = 0x00; - - /* Check the parameters */ - assert_param(IS_NVIC_SUB_PRIORITY(SubPriority)); - assert_param(IS_NVIC_PREEMPTION_PRIORITY(PreemptPriority)); - - prioritygroup = NVIC_GetPriorityGrouping(); - - NVIC_SetPriority(IRQn, NVIC_EncodePriority(prioritygroup, PreemptPriority, SubPriority)); -} - -/** - * @brief Enable a device specific interrupt in the NVIC interrupt controller. - * @note To configure interrupts priority correctly, the NVIC_PriorityGroupConfig() - * function should be called before. - * @param IRQn External interrupt number. - * This parameter can be an enumerator of IRQn_Type enumeration - * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32l4xxxx.h)) - * @retval None - */ -void HAL_NVIC_EnableIRQ(IRQn_Type IRQn) -{ - /* Check the parameters */ - assert_param(IS_NVIC_DEVICE_IRQ(IRQn)); - - /* Enable interrupt */ - NVIC_EnableIRQ(IRQn); -} - -/** - * @brief Disable a device specific interrupt in the NVIC interrupt controller. - * @param IRQn External interrupt number. - * This parameter can be an enumerator of IRQn_Type enumeration - * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32l4xxxx.h)) - * @retval None - */ -void HAL_NVIC_DisableIRQ(IRQn_Type IRQn) -{ - /* Check the parameters */ - assert_param(IS_NVIC_DEVICE_IRQ(IRQn)); - - /* Disable interrupt */ - NVIC_DisableIRQ(IRQn); -} - -/** - * @brief Initiate a system reset request to reset the MCU. - * @retval None - */ -void HAL_NVIC_SystemReset(void) -{ - /* System Reset */ - NVIC_SystemReset(); -} - -/** - * @brief Initialize the System Timer with interrupt enabled and start the System Tick Timer (SysTick): - * Counter is in free running mode to generate periodic interrupts. - * @param TicksNumb: Specifies the ticks Number of ticks between two interrupts. - * @retval status: - 0 Function succeeded. - * - 1 Function failed. - */ -uint32_t HAL_SYSTICK_Config(uint32_t TicksNumb) -{ - return SysTick_Config(TicksNumb); -} -/** - * @} - */ - -/** @addtogroup CORTEX_Exported_Functions_Group2 - * @brief Cortex control functions - * -@verbatim - ============================================================================== - ##### Peripheral Control functions ##### - ============================================================================== - [..] - This subsection provides a set of functions allowing to control the CORTEX - (NVIC, SYSTICK, MPU) functionalities. - - -@endverbatim - * @{ - */ - -/** - * @brief Get the priority grouping field from the NVIC Interrupt Controller. - * @retval Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field) - */ -uint32_t HAL_NVIC_GetPriorityGrouping(void) -{ - /* Get the PRIGROUP[10:8] field value */ - return NVIC_GetPriorityGrouping(); -} - -/** - * @brief Get the priority of an interrupt. - * @param IRQn: External interrupt number. - * This parameter can be an enumerator of IRQn_Type enumeration - * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32l4xxxx.h)) - * @param PriorityGroup: the priority grouping bits length. - * This parameter can be one of the following values: - * @arg NVIC_PRIORITYGROUP_0: 0 bit for pre-emption priority, - * 4 bits for subpriority - * @arg NVIC_PRIORITYGROUP_1: 1 bit for pre-emption priority, - * 3 bits for subpriority - * @arg NVIC_PRIORITYGROUP_2: 2 bits for pre-emption priority, - * 2 bits for subpriority - * @arg NVIC_PRIORITYGROUP_3: 3 bits for pre-emption priority, - * 1 bit for subpriority - * @arg NVIC_PRIORITYGROUP_4: 4 bits for pre-emption priority, - * 0 bit for subpriority - * @param pPreemptPriority: Pointer on the Preemptive priority value (starting from 0). - * @param pSubPriority: Pointer on the Subpriority value (starting from 0). - * @retval None - */ -void HAL_NVIC_GetPriority(IRQn_Type IRQn, uint32_t PriorityGroup, uint32_t *pPreemptPriority, uint32_t *pSubPriority) -{ - /* Check the parameters */ - assert_param(IS_NVIC_PRIORITY_GROUP(PriorityGroup)); - /* Get priority for Cortex-M system or device specific interrupts */ - NVIC_DecodePriority(NVIC_GetPriority(IRQn), PriorityGroup, pPreemptPriority, pSubPriority); -} - -/** - * @brief Set Pending bit of an external interrupt. - * @param IRQn External interrupt number - * This parameter can be an enumerator of IRQn_Type enumeration - * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32l4xxxx.h)) - * @retval None - */ -void HAL_NVIC_SetPendingIRQ(IRQn_Type IRQn) -{ - /* Check the parameters */ - assert_param(IS_NVIC_DEVICE_IRQ(IRQn)); - - /* Set interrupt pending */ - NVIC_SetPendingIRQ(IRQn); -} - -/** - * @brief Get Pending Interrupt (read the pending register in the NVIC - * and return the pending bit for the specified interrupt). - * @param IRQn External interrupt number. - * This parameter can be an enumerator of IRQn_Type enumeration - * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32l4xxxx.h)) - * @retval status: - 0 Interrupt status is not pending. - * - 1 Interrupt status is pending. - */ -uint32_t HAL_NVIC_GetPendingIRQ(IRQn_Type IRQn) -{ - /* Check the parameters */ - assert_param(IS_NVIC_DEVICE_IRQ(IRQn)); - - /* Return 1 if pending else 0 */ - return NVIC_GetPendingIRQ(IRQn); -} - -/** - * @brief Clear the pending bit of an external interrupt. - * @param IRQn External interrupt number. - * This parameter can be an enumerator of IRQn_Type enumeration - * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32l4xxxx.h)) - * @retval None - */ -void HAL_NVIC_ClearPendingIRQ(IRQn_Type IRQn) -{ - /* Check the parameters */ - assert_param(IS_NVIC_DEVICE_IRQ(IRQn)); - - /* Clear pending interrupt */ - NVIC_ClearPendingIRQ(IRQn); -} - -/** - * @brief Get active interrupt (read the active register in NVIC and return the active bit). - * @param IRQn External interrupt number - * This parameter can be an enumerator of IRQn_Type enumeration - * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32l4xxxx.h)) - * @retval status: - 0 Interrupt status is not pending. - * - 1 Interrupt status is pending. - */ -uint32_t HAL_NVIC_GetActive(IRQn_Type IRQn) -{ - /* Return 1 if active else 0 */ - return NVIC_GetActive(IRQn); -} - -/** - * @brief Configure the SysTick clock source. - * @param CLKSource: specifies the SysTick clock source. - * This parameter can be one of the following values: - * @arg SYSTICK_CLKSOURCE_HCLK_DIV8: AHB clock divided by 8 selected as SysTick clock source. - * @arg SYSTICK_CLKSOURCE_HCLK: AHB clock selected as SysTick clock source. - * @retval None - */ -void HAL_SYSTICK_CLKSourceConfig(uint32_t CLKSource) -{ - /* Check the parameters */ - assert_param(IS_SYSTICK_CLK_SOURCE(CLKSource)); - if (CLKSource == SYSTICK_CLKSOURCE_HCLK) - { - SysTick->CTRL |= SYSTICK_CLKSOURCE_HCLK; - } - else - { - SysTick->CTRL &= ~SYSTICK_CLKSOURCE_HCLK; - } -} - -/** - * @brief Handle SYSTICK interrupt request. - * @retval None - */ -void HAL_SYSTICK_IRQHandler(void) -{ - HAL_SYSTICK_Callback(); -} - -/** - * @brief SYSTICK callback. - * @retval None - */ -__weak void HAL_SYSTICK_Callback(void) -{ - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_SYSTICK_Callback could be implemented in the user file - */ -} - -#if (__MPU_PRESENT == 1) -/** - * @brief Enable the MPU. - * @param MPU_Control: Specifies the control mode of the MPU during hard fault, - * NMI, FAULTMASK and privileged accessto the default memory - * This parameter can be one of the following values: - * @arg MPU_HFNMI_PRIVDEF_NONE - * @arg MPU_HARDFAULT_NMI - * @arg MPU_PRIVILEGED_DEFAULT - * @arg MPU_HFNMI_PRIVDEF - * @retval None - */ -void HAL_MPU_Enable(uint32_t MPU_Control) -{ - /* Enable the MPU */ - MPU->CTRL = (MPU_Control | MPU_CTRL_ENABLE_Msk); - - /* Ensure MPU setting take effects */ - __DSB(); - __ISB(); -} - - -/** - * @brief Disable the MPU. - * @retval None - */ -void HAL_MPU_Disable(void) -{ - /* Make sure outstanding transfers are done */ - __DMB(); - - /* Disable the MPU and clear the control register*/ - MPU->CTRL = 0; -} - - -/** - * @brief Initialize and configure the Region and the memory to be protected. - * @param MPU_Init: Pointer to a MPU_Region_InitTypeDef structure that contains - * the initialization and configuration information. - * @retval None - */ -void HAL_MPU_ConfigRegion(MPU_Region_InitTypeDef *MPU_Init) -{ - /* Check the parameters */ - assert_param(IS_MPU_REGION_NUMBER(MPU_Init->Number)); - assert_param(IS_MPU_REGION_ENABLE(MPU_Init->Enable)); - - /* Set the Region number */ - MPU->RNR = MPU_Init->Number; - - if ((MPU_Init->Enable) != RESET) - { - /* Check the parameters */ - assert_param(IS_MPU_INSTRUCTION_ACCESS(MPU_Init->DisableExec)); - assert_param(IS_MPU_REGION_PERMISSION_ATTRIBUTE(MPU_Init->AccessPermission)); - assert_param(IS_MPU_TEX_LEVEL(MPU_Init->TypeExtField)); - assert_param(IS_MPU_ACCESS_SHAREABLE(MPU_Init->IsShareable)); - assert_param(IS_MPU_ACCESS_CACHEABLE(MPU_Init->IsCacheable)); - assert_param(IS_MPU_ACCESS_BUFFERABLE(MPU_Init->IsBufferable)); - assert_param(IS_MPU_SUB_REGION_DISABLE(MPU_Init->SubRegionDisable)); - assert_param(IS_MPU_REGION_SIZE(MPU_Init->Size)); - - MPU->RBAR = MPU_Init->BaseAddress; - MPU->RASR = ((uint32_t)MPU_Init->DisableExec << MPU_RASR_XN_Pos) | - ((uint32_t)MPU_Init->AccessPermission << MPU_RASR_AP_Pos) | - ((uint32_t)MPU_Init->TypeExtField << MPU_RASR_TEX_Pos) | - ((uint32_t)MPU_Init->IsShareable << MPU_RASR_S_Pos) | - ((uint32_t)MPU_Init->IsCacheable << MPU_RASR_C_Pos) | - ((uint32_t)MPU_Init->IsBufferable << MPU_RASR_B_Pos) | - ((uint32_t)MPU_Init->SubRegionDisable << MPU_RASR_SRD_Pos) | - ((uint32_t)MPU_Init->Size << MPU_RASR_SIZE_Pos) | - ((uint32_t)MPU_Init->Enable << MPU_RASR_ENABLE_Pos); - } - else - { - MPU->RBAR = 0x00; - MPU->RASR = 0x00; - } -} -#endif /* __MPU_PRESENT */ - -/** - * @} - */ - -/** - * @} - */ - -#endif /* HAL_CORTEX_MODULE_ENABLED */ -/** - * @} - */ - -/** - * @} - */ - +/** + ****************************************************************************** + * @file stm32l4xx_hal_cortex.c + * @author MCD Application Team + * @brief CORTEX HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the CORTEX: + * + Initialization and Configuration functions + * + Peripheral Control functions + * + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + + [..] + *** How to configure Interrupts using CORTEX HAL driver *** + =========================================================== + [..] + This section provides functions allowing to configure the NVIC interrupts (IRQ). + The Cortex-M4 exceptions are managed by CMSIS functions. + + (#) Configure the NVIC Priority Grouping using HAL_NVIC_SetPriorityGrouping() function. + (#) Configure the priority of the selected IRQ Channels using HAL_NVIC_SetPriority(). + (#) Enable the selected IRQ Channels using HAL_NVIC_EnableIRQ(). + + -@- When the NVIC_PRIORITYGROUP_0 is selected, IRQ pre-emption is no more possible. + The pending IRQ priority will be managed only by the sub priority. + + -@- IRQ priority order (sorted by highest to lowest priority): + (+@) Lowest pre-emption priority + (+@) Lowest sub priority + (+@) Lowest hardware priority (IRQ number) + + [..] + *** How to configure SysTick using CORTEX HAL driver *** + ======================================================== + [..] + Setup SysTick Timer for time base. + + (+) The HAL_SYSTICK_Config() function calls the SysTick_Config() function which + is a CMSIS function that: + (++) Configures the SysTick Reload register with value passed as function parameter. + (++) Configures the SysTick IRQ priority to the lowest value (0x0F). + (++) Resets the SysTick Counter register. + (++) Configures the SysTick Counter clock source to be Core Clock Source (HCLK). + (++) Enables the SysTick Interrupt. + (++) Starts the SysTick Counter. + + (+) You can change the SysTick Clock source to be HCLK_Div8 by calling the macro + __HAL_CORTEX_SYSTICKCLK_CONFIG(SYSTICK_CLKSOURCE_HCLK_DIV8) just after the + HAL_SYSTICK_Config() function call. The __HAL_CORTEX_SYSTICKCLK_CONFIG() macro is defined + inside the stm32l4xx_hal_cortex.h file. + + (+) You can change the SysTick IRQ priority by calling the + HAL_NVIC_SetPriority(SysTick_IRQn,...) function just after the HAL_SYSTICK_Config() function + call. The HAL_NVIC_SetPriority() call the NVIC_SetPriority() function which is a CMSIS function. + + (+) To adjust the SysTick time base, use the following formula: + + Reload Value = SysTick Counter Clock (Hz) x Desired Time base (s) + (++) Reload Value is the parameter to be passed for HAL_SYSTICK_Config() function + (++) Reload Value should not exceed 0xFFFFFF + + @endverbatim + ****************************************************************************** + + The table below gives the allowed values of the pre-emption priority and subpriority according + to the Priority Grouping configuration performed by HAL_NVIC_SetPriorityGrouping() function. + + ========================================================================================================================== + NVIC_PriorityGroup | NVIC_IRQChannelPreemptionPriority | NVIC_IRQChannelSubPriority | Description + ========================================================================================================================== + NVIC_PRIORITYGROUP_0 | 0 | 0-15 | 0 bit for pre-emption priority + | | | 4 bits for subpriority + -------------------------------------------------------------------------------------------------------------------------- + NVIC_PRIORITYGROUP_1 | 0-1 | 0-7 | 1 bit for pre-emption priority + | | | 3 bits for subpriority + -------------------------------------------------------------------------------------------------------------------------- + NVIC_PRIORITYGROUP_2 | 0-3 | 0-3 | 2 bits for pre-emption priority + | | | 2 bits for subpriority + -------------------------------------------------------------------------------------------------------------------------- + NVIC_PRIORITYGROUP_3 | 0-7 | 0-1 | 3 bits for pre-emption priority + | | | 1 bit for subpriority + -------------------------------------------------------------------------------------------------------------------------- + NVIC_PRIORITYGROUP_4 | 0-15 | 0 | 4 bits for pre-emption priority + | | | 0 bit for subpriority + ========================================================================================================================== + + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file in + * the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l4xx_hal.h" + +/** @addtogroup STM32L4xx_HAL_Driver + * @{ + */ + +/** @addtogroup CORTEX + * @{ + */ + +#ifdef HAL_CORTEX_MODULE_ENABLED + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ + +/** @addtogroup CORTEX_Exported_Functions + * @{ + */ + + +/** @addtogroup CORTEX_Exported_Functions_Group1 + * @brief Initialization and Configuration functions + * +@verbatim + ============================================================================== + ##### Initialization and Configuration functions ##### + ============================================================================== + [..] + This section provides the CORTEX HAL driver functions allowing to configure Interrupts + SysTick functionalities + +@endverbatim + * @{ + */ + + +/** + * @brief Set the priority grouping field (pre-emption priority and subpriority) + * using the required unlock sequence. + * @param PriorityGroup: The priority grouping bits length. + * This parameter can be one of the following values: + * @arg NVIC_PRIORITYGROUP_0: 0 bit for pre-emption priority, + * 4 bits for subpriority + * @arg NVIC_PRIORITYGROUP_1: 1 bit for pre-emption priority, + * 3 bits for subpriority + * @arg NVIC_PRIORITYGROUP_2: 2 bits for pre-emption priority, + * 2 bits for subpriority + * @arg NVIC_PRIORITYGROUP_3: 3 bits for pre-emption priority, + * 1 bit for subpriority + * @arg NVIC_PRIORITYGROUP_4: 4 bits for pre-emption priority, + * 0 bit for subpriority + * @note When the NVIC_PriorityGroup_0 is selected, IRQ pre-emption is no more possible. + * The pending IRQ priority will be managed only by the subpriority. + * @retval None + */ +void HAL_NVIC_SetPriorityGrouping(uint32_t PriorityGroup) +{ + /* Check the parameters */ + assert_param(IS_NVIC_PRIORITY_GROUP(PriorityGroup)); + + /* Set the PRIGROUP[10:8] bits according to the PriorityGroup parameter value */ + NVIC_SetPriorityGrouping(PriorityGroup); +} + +/** + * @brief Set the priority of an interrupt. + * @param IRQn: External interrupt number. + * This parameter can be an enumerator of IRQn_Type enumeration + * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32l4xxxx.h)) + * @param PreemptPriority: The pre-emption priority for the IRQn channel. + * This parameter can be a value between 0 and 15 + * A lower priority value indicates a higher priority + * @param SubPriority: the subpriority level for the IRQ channel. + * This parameter can be a value between 0 and 15 + * A lower priority value indicates a higher priority. + * @retval None + */ +void HAL_NVIC_SetPriority(IRQn_Type IRQn, uint32_t PreemptPriority, uint32_t SubPriority) +{ + uint32_t prioritygroup = 0x00; + + /* Check the parameters */ + assert_param(IS_NVIC_SUB_PRIORITY(SubPriority)); + assert_param(IS_NVIC_PREEMPTION_PRIORITY(PreemptPriority)); + + prioritygroup = NVIC_GetPriorityGrouping(); + + NVIC_SetPriority(IRQn, NVIC_EncodePriority(prioritygroup, PreemptPriority, SubPriority)); +} + +/** + * @brief Enable a device specific interrupt in the NVIC interrupt controller. + * @note To configure interrupts priority correctly, the NVIC_PriorityGroupConfig() + * function should be called before. + * @param IRQn External interrupt number. + * This parameter can be an enumerator of IRQn_Type enumeration + * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32l4xxxx.h)) + * @retval None + */ +void HAL_NVIC_EnableIRQ(IRQn_Type IRQn) +{ + /* Check the parameters */ + assert_param(IS_NVIC_DEVICE_IRQ(IRQn)); + + /* Enable interrupt */ + NVIC_EnableIRQ(IRQn); +} + +/** + * @brief Disable a device specific interrupt in the NVIC interrupt controller. + * @param IRQn External interrupt number. + * This parameter can be an enumerator of IRQn_Type enumeration + * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32l4xxxx.h)) + * @retval None + */ +void HAL_NVIC_DisableIRQ(IRQn_Type IRQn) +{ + /* Check the parameters */ + assert_param(IS_NVIC_DEVICE_IRQ(IRQn)); + + /* Disable interrupt */ + NVIC_DisableIRQ(IRQn); +} + +/** + * @brief Initiate a system reset request to reset the MCU. + * @retval None + */ +void HAL_NVIC_SystemReset(void) +{ + /* System Reset */ + NVIC_SystemReset(); +} + +/** + * @brief Initialize the System Timer with interrupt enabled and start the System Tick Timer (SysTick): + * Counter is in free running mode to generate periodic interrupts. + * @param TicksNumb: Specifies the ticks Number of ticks between two interrupts. + * @retval status: - 0 Function succeeded. + * - 1 Function failed. + */ +uint32_t HAL_SYSTICK_Config(uint32_t TicksNumb) +{ + return SysTick_Config(TicksNumb); +} +/** + * @} + */ + +/** @addtogroup CORTEX_Exported_Functions_Group2 + * @brief Cortex control functions + * +@verbatim + ============================================================================== + ##### Peripheral Control functions ##### + ============================================================================== + [..] + This subsection provides a set of functions allowing to control the CORTEX + (NVIC, SYSTICK, MPU) functionalities. + + +@endverbatim + * @{ + */ + +/** + * @brief Get the priority grouping field from the NVIC Interrupt Controller. + * @retval Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field) + */ +uint32_t HAL_NVIC_GetPriorityGrouping(void) +{ + /* Get the PRIGROUP[10:8] field value */ + return NVIC_GetPriorityGrouping(); +} + +/** + * @brief Get the priority of an interrupt. + * @param IRQn: External interrupt number. + * This parameter can be an enumerator of IRQn_Type enumeration + * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32l4xxxx.h)) + * @param PriorityGroup: the priority grouping bits length. + * This parameter can be one of the following values: + * @arg NVIC_PRIORITYGROUP_0: 0 bit for pre-emption priority, + * 4 bits for subpriority + * @arg NVIC_PRIORITYGROUP_1: 1 bit for pre-emption priority, + * 3 bits for subpriority + * @arg NVIC_PRIORITYGROUP_2: 2 bits for pre-emption priority, + * 2 bits for subpriority + * @arg NVIC_PRIORITYGROUP_3: 3 bits for pre-emption priority, + * 1 bit for subpriority + * @arg NVIC_PRIORITYGROUP_4: 4 bits for pre-emption priority, + * 0 bit for subpriority + * @param pPreemptPriority: Pointer on the Preemptive priority value (starting from 0). + * @param pSubPriority: Pointer on the Subpriority value (starting from 0). + * @retval None + */ +void HAL_NVIC_GetPriority(IRQn_Type IRQn, uint32_t PriorityGroup, uint32_t *pPreemptPriority, uint32_t *pSubPriority) +{ + /* Check the parameters */ + assert_param(IS_NVIC_PRIORITY_GROUP(PriorityGroup)); + /* Get priority for Cortex-M system or device specific interrupts */ + NVIC_DecodePriority(NVIC_GetPriority(IRQn), PriorityGroup, pPreemptPriority, pSubPriority); +} + +/** + * @brief Set Pending bit of an external interrupt. + * @param IRQn External interrupt number + * This parameter can be an enumerator of IRQn_Type enumeration + * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32l4xxxx.h)) + * @retval None + */ +void HAL_NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + /* Check the parameters */ + assert_param(IS_NVIC_DEVICE_IRQ(IRQn)); + + /* Set interrupt pending */ + NVIC_SetPendingIRQ(IRQn); +} + +/** + * @brief Get Pending Interrupt (read the pending register in the NVIC + * and return the pending bit for the specified interrupt). + * @param IRQn External interrupt number. + * This parameter can be an enumerator of IRQn_Type enumeration + * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32l4xxxx.h)) + * @retval status: - 0 Interrupt status is not pending. + * - 1 Interrupt status is pending. + */ +uint32_t HAL_NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + /* Check the parameters */ + assert_param(IS_NVIC_DEVICE_IRQ(IRQn)); + + /* Return 1 if pending else 0 */ + return NVIC_GetPendingIRQ(IRQn); +} + +/** + * @brief Clear the pending bit of an external interrupt. + * @param IRQn External interrupt number. + * This parameter can be an enumerator of IRQn_Type enumeration + * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32l4xxxx.h)) + * @retval None + */ +void HAL_NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + /* Check the parameters */ + assert_param(IS_NVIC_DEVICE_IRQ(IRQn)); + + /* Clear pending interrupt */ + NVIC_ClearPendingIRQ(IRQn); +} + +/** + * @brief Get active interrupt (read the active register in NVIC and return the active bit). + * @param IRQn External interrupt number + * This parameter can be an enumerator of IRQn_Type enumeration + * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32l4xxxx.h)) + * @retval status: - 0 Interrupt status is not pending. + * - 1 Interrupt status is pending. + */ +uint32_t HAL_NVIC_GetActive(IRQn_Type IRQn) +{ + /* Return 1 if active else 0 */ + return NVIC_GetActive(IRQn); +} + +/** + * @brief Configure the SysTick clock source. + * @param CLKSource: specifies the SysTick clock source. + * This parameter can be one of the following values: + * @arg SYSTICK_CLKSOURCE_HCLK_DIV8: AHB clock divided by 8 selected as SysTick clock source. + * @arg SYSTICK_CLKSOURCE_HCLK: AHB clock selected as SysTick clock source. + * @retval None + */ +void HAL_SYSTICK_CLKSourceConfig(uint32_t CLKSource) +{ + /* Check the parameters */ + assert_param(IS_SYSTICK_CLK_SOURCE(CLKSource)); + if (CLKSource == SYSTICK_CLKSOURCE_HCLK) + { + SysTick->CTRL |= SYSTICK_CLKSOURCE_HCLK; + } + else + { + SysTick->CTRL &= ~SYSTICK_CLKSOURCE_HCLK; + } +} + +/** + * @brief Handle SYSTICK interrupt request. + * @retval None + */ +void HAL_SYSTICK_IRQHandler(void) +{ + HAL_SYSTICK_Callback(); +} + +/** + * @brief SYSTICK callback. + * @retval None + */ +__weak void HAL_SYSTICK_Callback(void) +{ + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SYSTICK_Callback could be implemented in the user file + */ +} + +#if (__MPU_PRESENT == 1) +/** + * @brief Enable the MPU. + * @param MPU_Control: Specifies the control mode of the MPU during hard fault, + * NMI, FAULTMASK and privileged accessto the default memory + * This parameter can be one of the following values: + * @arg MPU_HFNMI_PRIVDEF_NONE + * @arg MPU_HARDFAULT_NMI + * @arg MPU_PRIVILEGED_DEFAULT + * @arg MPU_HFNMI_PRIVDEF + * @retval None + */ +void HAL_MPU_Enable(uint32_t MPU_Control) +{ + /* Enable the MPU */ + MPU->CTRL = (MPU_Control | MPU_CTRL_ENABLE_Msk); + + /* Ensure MPU setting take effects */ + __DSB(); + __ISB(); +} + + +/** + * @brief Disable the MPU. + * @retval None + */ +void HAL_MPU_Disable(void) +{ + /* Make sure outstanding transfers are done */ + __DMB(); + + /* Disable the MPU and clear the control register*/ + MPU->CTRL = 0; +} + +/** + * @brief Enable the MPU Region. + * @retval None + */ +void HAL_MPU_EnableRegion(uint32_t RegionNumber) +{ + /* Check the parameters */ + assert_param(IS_MPU_REGION_NUMBER(RegionNumber)); + + /* Set the Region number */ + MPU->RNR = RegionNumber; + + /* Enable the Region */ + SET_BIT(MPU->RASR, MPU_RASR_ENABLE_Msk); +} + +/** + * @brief Disable the MPU Region. + * @retval None + */ +void HAL_MPU_DisableRegion(uint32_t RegionNumber) +{ + /* Check the parameters */ + assert_param(IS_MPU_REGION_NUMBER(RegionNumber)); + + /* Set the Region number */ + MPU->RNR = RegionNumber; + + /* Disable the Region */ + CLEAR_BIT(MPU->RASR, MPU_RASR_ENABLE_Msk); +} + +/** + * @brief Initialize and configure the Region and the memory to be protected. + * @param MPU_Init: Pointer to a MPU_Region_InitTypeDef structure that contains + * the initialization and configuration information. + * @retval None + */ +void HAL_MPU_ConfigRegion(MPU_Region_InitTypeDef *MPU_Init) +{ + /* Check the parameters */ + assert_param(IS_MPU_REGION_NUMBER(MPU_Init->Number)); + assert_param(IS_MPU_REGION_ENABLE(MPU_Init->Enable)); + assert_param(IS_MPU_INSTRUCTION_ACCESS(MPU_Init->DisableExec)); + assert_param(IS_MPU_REGION_PERMISSION_ATTRIBUTE(MPU_Init->AccessPermission)); + assert_param(IS_MPU_TEX_LEVEL(MPU_Init->TypeExtField)); + assert_param(IS_MPU_ACCESS_SHAREABLE(MPU_Init->IsShareable)); + assert_param(IS_MPU_ACCESS_CACHEABLE(MPU_Init->IsCacheable)); + assert_param(IS_MPU_ACCESS_BUFFERABLE(MPU_Init->IsBufferable)); + assert_param(IS_MPU_SUB_REGION_DISABLE(MPU_Init->SubRegionDisable)); + assert_param(IS_MPU_REGION_SIZE(MPU_Init->Size)); + /* Set the Region number */ + MPU->RNR = MPU_Init->Number; + +/* Disable the Region */ + CLEAR_BIT(MPU->RASR, MPU_RASR_ENABLE_Msk); + + /* Apply configuration */ + MPU->RBAR = MPU_Init->BaseAddress; + MPU->RASR = ((uint32_t)MPU_Init->DisableExec << MPU_RASR_XN_Pos) | + ((uint32_t)MPU_Init->AccessPermission << MPU_RASR_AP_Pos) | + ((uint32_t)MPU_Init->TypeExtField << MPU_RASR_TEX_Pos) | + ((uint32_t)MPU_Init->IsShareable << MPU_RASR_S_Pos) | + ((uint32_t)MPU_Init->IsCacheable << MPU_RASR_C_Pos) | + ((uint32_t)MPU_Init->IsBufferable << MPU_RASR_B_Pos) | + ((uint32_t)MPU_Init->SubRegionDisable << MPU_RASR_SRD_Pos) | + ((uint32_t)MPU_Init->Size << MPU_RASR_SIZE_Pos) | + ((uint32_t)MPU_Init->Enable << MPU_RASR_ENABLE_Pos); +} +#endif /* __MPU_PRESENT */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_CORTEX_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + diff --git a/CablePositioning_IAP_V1.0/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma.c b/CablePositioning_IAP_V1.0/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma.c index ca8e9cc..c9927db 100644 --- a/CablePositioning_IAP_V1.0/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma.c +++ b/CablePositioning_IAP_V1.0/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma.c @@ -1,1174 +1,1174 @@ -/** - ****************************************************************************** - * @file stm32l4xx_hal_dma.c - * @author MCD Application Team - * @brief DMA HAL module driver. - * This file provides firmware functions to manage the following - * functionalities of the Direct Memory Access (DMA) peripheral: - * + Initialization and de-initialization functions - * + IO operation functions - * + Peripheral State and errors functions - * - ****************************************************************************** - * @attention - * - * Copyright (c) 2017 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - @verbatim - ============================================================================== - ##### How to use this driver ##### - ============================================================================== - [..] - (#) Enable and configure the peripheral to be connected to the DMA Channel - (except for internal SRAM / FLASH memories: no initialization is - necessary). Please refer to the Reference manual for connection between peripherals - and DMA requests. - - (#) For a given Channel, program the required configuration through the following parameters: - Channel request, Transfer Direction, Source and Destination data formats, - Circular or Normal mode, Channel Priority level, Source and Destination Increment mode - using HAL_DMA_Init() function. - - Prior to HAL_DMA_Init the peripheral clock shall be enabled for both DMA & DMAMUX - thanks to: - (##) DMA1 or DMA2: __HAL_RCC_DMA1_CLK_ENABLE() or __HAL_RCC_DMA2_CLK_ENABLE() ; - (##) DMAMUX1: __HAL_RCC_DMAMUX1_CLK_ENABLE(); - - (#) Use HAL_DMA_GetState() function to return the DMA state and HAL_DMA_GetError() in case of error - detection. - - (#) Use HAL_DMA_Abort() function to abort the current transfer - - -@- In Memory-to-Memory transfer mode, Circular mode is not allowed. - - *** Polling mode IO operation *** - ================================= - [..] - (+) Use HAL_DMA_Start() to start DMA transfer after the configuration of Source - address and destination address and the Length of data to be transferred - (+) Use HAL_DMA_PollForTransfer() to poll for the end of current transfer, in this - case a fixed Timeout can be configured by User depending from his application. - - *** Interrupt mode IO operation *** - =================================== - [..] - (+) Configure the DMA interrupt priority using HAL_NVIC_SetPriority() - (+) Enable the DMA IRQ handler using HAL_NVIC_EnableIRQ() - (+) Use HAL_DMA_Start_IT() to start DMA transfer after the configuration of - Source address and destination address and the Length of data to be transferred. - In this case the DMA interrupt is configured - (+) Use HAL_DMA_IRQHandler() called under DMA_IRQHandler() Interrupt subroutine - (+) At the end of data transfer HAL_DMA_IRQHandler() function is executed and user can - add his own function to register callbacks with HAL_DMA_RegisterCallback(). - - *** DMA HAL driver macros list *** - ============================================= - [..] - Below the list of macros in DMA HAL driver. - - (+) __HAL_DMA_ENABLE: Enable the specified DMA Channel. - (+) __HAL_DMA_DISABLE: Disable the specified DMA Channel. - (+) __HAL_DMA_GET_FLAG: Get the DMA Channel pending flags. - (+) __HAL_DMA_CLEAR_FLAG: Clear the DMA Channel pending flags. - (+) __HAL_DMA_ENABLE_IT: Enable the specified DMA Channel interrupts. - (+) __HAL_DMA_DISABLE_IT: Disable the specified DMA Channel interrupts. - (+) __HAL_DMA_GET_IT_SOURCE: Check whether the specified DMA Channel interrupt is enabled or not. - - [..] - (@) You can refer to the DMA HAL driver header file for more useful macros - - @endverbatim - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32l4xx_hal.h" - -/** @addtogroup STM32L4xx_HAL_Driver - * @{ - */ - -/** @defgroup DMA DMA - * @brief DMA HAL module driver - * @{ - */ - -#ifdef HAL_DMA_MODULE_ENABLED - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ -/** @defgroup DMA_Private_Functions DMA Private Functions - * @{ - */ -static void DMA_SetConfig(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength); -#if defined(DMAMUX1) -static void DMA_CalcDMAMUXChannelBaseAndMask(DMA_HandleTypeDef *hdma); -static void DMA_CalcDMAMUXRequestGenBaseAndMask(DMA_HandleTypeDef *hdma); -#endif /* DMAMUX1 */ - -/** - * @} - */ - -/* Exported functions ---------------------------------------------------------*/ - -/** @defgroup DMA_Exported_Functions DMA Exported Functions - * @{ - */ - -/** @defgroup DMA_Exported_Functions_Group1 Initialization and de-initialization functions - * @brief Initialization and de-initialization functions - * -@verbatim - =============================================================================== - ##### Initialization and de-initialization functions ##### - =============================================================================== - [..] - This section provides functions allowing to initialize the DMA Channel source - and destination addresses, incrementation and data sizes, transfer direction, - circular/normal mode selection, memory-to-memory mode selection and Channel priority value. - [..] - The HAL_DMA_Init() function follows the DMA configuration procedures as described in - reference manual. - -@endverbatim - * @{ - */ - -/** - * @brief Initialize the DMA according to the specified - * parameters in the DMA_InitTypeDef and initialize the associated handle. - * @param hdma pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA Channel. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_DMA_Init(DMA_HandleTypeDef *hdma) -{ - uint32_t tmp; - - /* Check the DMA handle allocation */ - if(hdma == NULL) - { - return HAL_ERROR; - } - - /* Check the parameters */ - assert_param(IS_DMA_ALL_INSTANCE(hdma->Instance)); - assert_param(IS_DMA_DIRECTION(hdma->Init.Direction)); - assert_param(IS_DMA_PERIPHERAL_INC_STATE(hdma->Init.PeriphInc)); - assert_param(IS_DMA_MEMORY_INC_STATE(hdma->Init.MemInc)); - assert_param(IS_DMA_PERIPHERAL_DATA_SIZE(hdma->Init.PeriphDataAlignment)); - assert_param(IS_DMA_MEMORY_DATA_SIZE(hdma->Init.MemDataAlignment)); - assert_param(IS_DMA_MODE(hdma->Init.Mode)); - assert_param(IS_DMA_PRIORITY(hdma->Init.Priority)); - - assert_param(IS_DMA_ALL_REQUEST(hdma->Init.Request)); - - /* Compute the channel index */ - if ((uint32_t)(hdma->Instance) < (uint32_t)(DMA2_Channel1)) - { - /* DMA1 */ - hdma->ChannelIndex = (((uint32_t)hdma->Instance - (uint32_t)DMA1_Channel1) / ((uint32_t)DMA1_Channel2 - (uint32_t)DMA1_Channel1)) << 2U; - hdma->DmaBaseAddress = DMA1; - } - else - { - /* DMA2 */ - hdma->ChannelIndex = (((uint32_t)hdma->Instance - (uint32_t)DMA2_Channel1) / ((uint32_t)DMA2_Channel2 - (uint32_t)DMA2_Channel1)) << 2U; - hdma->DmaBaseAddress = DMA2; - } - - /* Change DMA peripheral state */ - hdma->State = HAL_DMA_STATE_BUSY; - - /* Get the CR register value */ - tmp = hdma->Instance->CCR; - - /* Clear PL, MSIZE, PSIZE, MINC, PINC, CIRC, DIR and MEM2MEM bits */ - tmp &= ((uint32_t)~(DMA_CCR_PL | DMA_CCR_MSIZE | DMA_CCR_PSIZE | - DMA_CCR_MINC | DMA_CCR_PINC | DMA_CCR_CIRC | - DMA_CCR_DIR | DMA_CCR_MEM2MEM)); - - /* Prepare the DMA Channel configuration */ - tmp |= hdma->Init.Direction | - hdma->Init.PeriphInc | hdma->Init.MemInc | - hdma->Init.PeriphDataAlignment | hdma->Init.MemDataAlignment | - hdma->Init.Mode | hdma->Init.Priority; - - /* Write to DMA Channel CR register */ - hdma->Instance->CCR = tmp; - -#if defined(DMAMUX1) - /* Initialize parameters for DMAMUX channel : - DMAmuxChannel, DMAmuxChannelStatus and DMAmuxChannelStatusMask - */ - DMA_CalcDMAMUXChannelBaseAndMask(hdma); - - if(hdma->Init.Direction == DMA_MEMORY_TO_MEMORY) - { - /* if memory to memory force the request to 0*/ - hdma->Init.Request = DMA_REQUEST_MEM2MEM; - } - - /* Set peripheral request to DMAMUX channel */ - hdma->DMAmuxChannel->CCR = (hdma->Init.Request & DMAMUX_CxCR_DMAREQ_ID); - - /* Clear the DMAMUX synchro overrun flag */ - hdma->DMAmuxChannelStatus->CFR = hdma->DMAmuxChannelStatusMask; - - if(((hdma->Init.Request > 0U) && (hdma->Init.Request <= DMA_REQUEST_GENERATOR3))) - { - /* Initialize parameters for DMAMUX request generator : - DMAmuxRequestGen, DMAmuxRequestGenStatus and DMAmuxRequestGenStatusMask - */ - DMA_CalcDMAMUXRequestGenBaseAndMask(hdma); - - /* Reset the DMAMUX request generator register*/ - hdma->DMAmuxRequestGen->RGCR = 0U; - - /* Clear the DMAMUX request generator overrun flag */ - hdma->DMAmuxRequestGenStatus->RGCFR = hdma->DMAmuxRequestGenStatusMask; - } - else - { - hdma->DMAmuxRequestGen = 0U; - hdma->DMAmuxRequestGenStatus = 0U; - hdma->DMAmuxRequestGenStatusMask = 0U; - } -#endif /* DMAMUX1 */ - -#if !defined (DMAMUX1) - - /* Set request selection */ - if(hdma->Init.Direction != DMA_MEMORY_TO_MEMORY) - { - /* Write to DMA channel selection register */ - if (DMA1 == hdma->DmaBaseAddress) - { - /* Reset request selection for DMA1 Channelx */ - DMA1_CSELR->CSELR &= ~(DMA_CSELR_C1S << (hdma->ChannelIndex & 0x1cU)); - - /* Configure request selection for DMA1 Channelx */ - DMA1_CSELR->CSELR |= (uint32_t) (hdma->Init.Request << (hdma->ChannelIndex & 0x1cU)); - } - else /* DMA2 */ - { - /* Reset request selection for DMA2 Channelx */ - DMA2_CSELR->CSELR &= ~(DMA_CSELR_C1S << (hdma->ChannelIndex & 0x1cU)); - - /* Configure request selection for DMA2 Channelx */ - DMA2_CSELR->CSELR |= (uint32_t) (hdma->Init.Request << (hdma->ChannelIndex & 0x1cU)); - } - } - -#endif /* STM32L431xx || STM32L432xx || STM32L433xx || STM32L442xx || STM32L443xx */ - /* STM32L471xx || STM32L475xx || STM32L476xx || STM32L442xx || STM32L486xx */ - /* STM32L496xx || STM32L4A6xx */ - - /* Initialise the error code */ - hdma->ErrorCode = HAL_DMA_ERROR_NONE; - - /* Initialize the DMA state*/ - hdma->State = HAL_DMA_STATE_READY; - - /* Allocate lock resource and initialize it */ - hdma->Lock = HAL_UNLOCKED; - - return HAL_OK; -} - -/** - * @brief DeInitialize the DMA peripheral. - * @param hdma pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA Channel. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_DMA_DeInit(DMA_HandleTypeDef *hdma) -{ - - /* Check the DMA handle allocation */ - if (NULL == hdma ) - { - return HAL_ERROR; - } - - /* Check the parameters */ - assert_param(IS_DMA_ALL_INSTANCE(hdma->Instance)); - - /* Disable the selected DMA Channelx */ - __HAL_DMA_DISABLE(hdma); - - /* Compute the channel index */ - if ((uint32_t)(hdma->Instance) < (uint32_t)(DMA2_Channel1)) - { - /* DMA1 */ - hdma->ChannelIndex = (((uint32_t)hdma->Instance - (uint32_t)DMA1_Channel1) / ((uint32_t)DMA1_Channel2 - (uint32_t)DMA1_Channel1)) << 2U; - hdma->DmaBaseAddress = DMA1; - } - else - { - /* DMA2 */ - hdma->ChannelIndex = (((uint32_t)hdma->Instance - (uint32_t)DMA2_Channel1) / ((uint32_t)DMA2_Channel2 - (uint32_t)DMA2_Channel1)) << 2U; - hdma->DmaBaseAddress = DMA2; - } - - /* Reset DMA Channel control register */ - hdma->Instance->CCR = 0U; - - /* Clear all flags */ - hdma->DmaBaseAddress->IFCR = (DMA_ISR_GIF1 << (hdma->ChannelIndex & 0x1CU)); - -#if !defined (DMAMUX1) - - /* Reset DMA channel selection register */ - if (DMA1 == hdma->DmaBaseAddress) - { - /* DMA1 */ - DMA1_CSELR->CSELR &= ~(DMA_CSELR_C1S << (hdma->ChannelIndex & 0x1cU)); - } - else - { - /* DMA2 */ - DMA2_CSELR->CSELR &= ~(DMA_CSELR_C1S << (hdma->ChannelIndex & 0x1cU)); - } -#endif /* STM32L431xx || STM32L432xx || STM32L433xx || STM32L442xx || STM32L443xx */ - /* STM32L471xx || STM32L475xx || STM32L476xx || STM32L442xx || STM32L486xx */ - /* STM32L496xx || STM32L4A6xx */ - -#if defined(DMAMUX1) - - /* Initialize parameters for DMAMUX channel : - DMAmuxChannel, DMAmuxChannelStatus and DMAmuxChannelStatusMask */ - - DMA_CalcDMAMUXChannelBaseAndMask(hdma); - - /* Reset the DMAMUX channel that corresponds to the DMA channel */ - hdma->DMAmuxChannel->CCR = 0U; - - /* Clear the DMAMUX synchro overrun flag */ - hdma->DMAmuxChannelStatus->CFR = hdma->DMAmuxChannelStatusMask; - - /* Reset Request generator parameters if any */ - if(((hdma->Init.Request > 0U) && (hdma->Init.Request <= DMA_REQUEST_GENERATOR3))) - { - /* Initialize parameters for DMAMUX request generator : - DMAmuxRequestGen, DMAmuxRequestGenStatus and DMAmuxRequestGenStatusMask - */ - DMA_CalcDMAMUXRequestGenBaseAndMask(hdma); - - /* Reset the DMAMUX request generator register*/ - hdma->DMAmuxRequestGen->RGCR = 0U; - - /* Clear the DMAMUX request generator overrun flag */ - hdma->DMAmuxRequestGenStatus->RGCFR = hdma->DMAmuxRequestGenStatusMask; - } - - hdma->DMAmuxRequestGen = 0U; - hdma->DMAmuxRequestGenStatus = 0U; - hdma->DMAmuxRequestGenStatusMask = 0U; - -#endif /* DMAMUX1 */ - - /* Clean callbacks */ - hdma->XferCpltCallback = NULL; - hdma->XferHalfCpltCallback = NULL; - hdma->XferErrorCallback = NULL; - hdma->XferAbortCallback = NULL; - - /* Initialise the error code */ - hdma->ErrorCode = HAL_DMA_ERROR_NONE; - - /* Initialize the DMA state */ - hdma->State = HAL_DMA_STATE_RESET; - - /* Release Lock */ - __HAL_UNLOCK(hdma); - - return HAL_OK; -} - -/** - * @} - */ - -/** @defgroup DMA_Exported_Functions_Group2 Input and Output operation functions - * @brief Input and Output operation functions - * -@verbatim - =============================================================================== - ##### IO operation functions ##### - =============================================================================== - [..] This section provides functions allowing to: - (+) Configure the source, destination address and data length and Start DMA transfer - (+) Configure the source, destination address and data length and - Start DMA transfer with interrupt - (+) Abort DMA transfer - (+) Poll for transfer complete - (+) Handle DMA interrupt request - -@endverbatim - * @{ - */ - -/** - * @brief Start the DMA Transfer. - * @param hdma pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA Channel. - * @param SrcAddress The source memory Buffer address - * @param DstAddress The destination memory Buffer address - * @param DataLength The length of data to be transferred from source to destination - * @retval HAL status - */ -HAL_StatusTypeDef HAL_DMA_Start(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Check the parameters */ - assert_param(IS_DMA_BUFFER_SIZE(DataLength)); - - /* Process locked */ - __HAL_LOCK(hdma); - - if(HAL_DMA_STATE_READY == hdma->State) - { - /* Change DMA peripheral state */ - hdma->State = HAL_DMA_STATE_BUSY; - hdma->ErrorCode = HAL_DMA_ERROR_NONE; - - /* Disable the peripheral */ - __HAL_DMA_DISABLE(hdma); - - /* Configure the source, destination address and the data length & clear flags*/ - DMA_SetConfig(hdma, SrcAddress, DstAddress, DataLength); - - /* Enable the Peripheral */ - __HAL_DMA_ENABLE(hdma); - } - else - { - /* Process Unlocked */ - __HAL_UNLOCK(hdma); - status = HAL_BUSY; - } - return status; -} - -/** - * @brief Start the DMA Transfer with interrupt enabled. - * @param hdma pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA Channel. - * @param SrcAddress The source memory Buffer address - * @param DstAddress The destination memory Buffer address - * @param DataLength The length of data to be transferred from source to destination - * @retval HAL status - */ -HAL_StatusTypeDef HAL_DMA_Start_IT(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Check the parameters */ - assert_param(IS_DMA_BUFFER_SIZE(DataLength)); - - /* Process locked */ - __HAL_LOCK(hdma); - - if(HAL_DMA_STATE_READY == hdma->State) - { - /* Change DMA peripheral state */ - hdma->State = HAL_DMA_STATE_BUSY; - hdma->ErrorCode = HAL_DMA_ERROR_NONE; - - /* Disable the peripheral */ - __HAL_DMA_DISABLE(hdma); - - /* Configure the source, destination address and the data length & clear flags*/ - DMA_SetConfig(hdma, SrcAddress, DstAddress, DataLength); - - /* Enable the transfer complete interrupt */ - /* Enable the transfer Error interrupt */ - if(NULL != hdma->XferHalfCpltCallback ) - { - /* Enable the Half transfer complete interrupt as well */ - __HAL_DMA_ENABLE_IT(hdma, (DMA_IT_TC | DMA_IT_HT | DMA_IT_TE)); - } - else - { - __HAL_DMA_DISABLE_IT(hdma, DMA_IT_HT); - __HAL_DMA_ENABLE_IT(hdma, (DMA_IT_TC | DMA_IT_TE)); - } - -#ifdef DMAMUX1 - - /* Check if DMAMUX Synchronization is enabled*/ - if((hdma->DMAmuxChannel->CCR & DMAMUX_CxCR_SE) != 0U) - { - /* Enable DMAMUX sync overrun IT*/ - hdma->DMAmuxChannel->CCR |= DMAMUX_CxCR_SOIE; - } - - if(hdma->DMAmuxRequestGen != 0U) - { - /* if using DMAMUX request generator, enable the DMAMUX request generator overrun IT*/ - /* enable the request gen overrun IT*/ - hdma->DMAmuxRequestGen->RGCR |= DMAMUX_RGxCR_OIE; - } - -#endif /* DMAMUX1 */ - - /* Enable the Peripheral */ - __HAL_DMA_ENABLE(hdma); - } - else - { - /* Process Unlocked */ - __HAL_UNLOCK(hdma); - - /* Remain BUSY */ - status = HAL_BUSY; - } - return status; -} - -/** - * @brief Abort the DMA Transfer. - * @param hdma pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA Channel. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_DMA_Abort(DMA_HandleTypeDef *hdma) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Check the DMA peripheral state */ - if(hdma->State != HAL_DMA_STATE_BUSY) - { - hdma->ErrorCode = HAL_DMA_ERROR_NO_XFER; - - /* Process Unlocked */ - __HAL_UNLOCK(hdma); - - return HAL_ERROR; - } - else - { - /* Disable DMA IT */ - __HAL_DMA_DISABLE_IT(hdma, (DMA_IT_TC | DMA_IT_HT | DMA_IT_TE)); - -#if defined(DMAMUX1) - /* disable the DMAMUX sync overrun IT*/ - hdma->DMAmuxChannel->CCR &= ~DMAMUX_CxCR_SOIE; -#endif /* DMAMUX1 */ - - /* Disable the channel */ - __HAL_DMA_DISABLE(hdma); - - /* Clear all flags */ - hdma->DmaBaseAddress->IFCR = (DMA_ISR_GIF1 << (hdma->ChannelIndex & 0x1CU)); - -#if defined(DMAMUX1) - /* Clear the DMAMUX synchro overrun flag */ - hdma->DMAmuxChannelStatus->CFR = hdma->DMAmuxChannelStatusMask; - - if(hdma->DMAmuxRequestGen != 0U) - { - /* if using DMAMUX request generator, disable the DMAMUX request generator overrun IT*/ - /* disable the request gen overrun IT*/ - hdma->DMAmuxRequestGen->RGCR &= ~DMAMUX_RGxCR_OIE; - - /* Clear the DMAMUX request generator overrun flag */ - hdma->DMAmuxRequestGenStatus->RGCFR = hdma->DMAmuxRequestGenStatusMask; - } - -#endif /* DMAMUX1 */ - - /* Change the DMA state */ - hdma->State = HAL_DMA_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(hdma); - - return status; - } -} - -/** - * @brief Aborts the DMA Transfer in Interrupt mode. - * @param hdma pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA Channel. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_DMA_Abort_IT(DMA_HandleTypeDef *hdma) -{ - HAL_StatusTypeDef status = HAL_OK; - - if(HAL_DMA_STATE_BUSY != hdma->State) - { - /* no transfer ongoing */ - hdma->ErrorCode = HAL_DMA_ERROR_NO_XFER; - - status = HAL_ERROR; - } - else - { - /* Disable DMA IT */ - __HAL_DMA_DISABLE_IT(hdma, (DMA_IT_TC | DMA_IT_HT | DMA_IT_TE)); - - /* Disable the channel */ - __HAL_DMA_DISABLE(hdma); - -#if defined(DMAMUX1) - /* disable the DMAMUX sync overrun IT*/ - hdma->DMAmuxChannel->CCR &= ~DMAMUX_CxCR_SOIE; - - /* Clear all flags */ - hdma->DmaBaseAddress->IFCR = (DMA_ISR_GIF1 << (hdma->ChannelIndex & 0x1CU)); - - /* Clear the DMAMUX synchro overrun flag */ - hdma->DMAmuxChannelStatus->CFR = hdma->DMAmuxChannelStatusMask; - - if(hdma->DMAmuxRequestGen != 0U) - { - /* if using DMAMUX request generator, disable the DMAMUX request generator overrun IT*/ - /* disable the request gen overrun IT*/ - hdma->DMAmuxRequestGen->RGCR &= ~DMAMUX_RGxCR_OIE; - - /* Clear the DMAMUX request generator overrun flag */ - hdma->DMAmuxRequestGenStatus->RGCFR = hdma->DMAmuxRequestGenStatusMask; - } - -#else - /* Clear all flags */ - hdma->DmaBaseAddress->IFCR = (DMA_ISR_GIF1 << (hdma->ChannelIndex & 0x1CU)); -#endif /* DMAMUX1 */ - - /* Change the DMA state */ - hdma->State = HAL_DMA_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(hdma); - - /* Call User Abort callback */ - if(hdma->XferAbortCallback != NULL) - { - hdma->XferAbortCallback(hdma); - } - } - return status; -} - -/** - * @brief Polling for transfer complete. - * @param hdma pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA Channel. - * @param CompleteLevel Specifies the DMA level complete. - * @param Timeout Timeout duration. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_DMA_PollForTransfer(DMA_HandleTypeDef *hdma, HAL_DMA_LevelCompleteTypeDef CompleteLevel, uint32_t Timeout) -{ - uint32_t temp; - uint32_t tickstart; - - if(HAL_DMA_STATE_BUSY != hdma->State) - { - /* no transfer ongoing */ - hdma->ErrorCode = HAL_DMA_ERROR_NO_XFER; - __HAL_UNLOCK(hdma); - return HAL_ERROR; - } - - /* Polling mode not supported in circular mode */ - if ((hdma->Instance->CCR & DMA_CCR_CIRC) != 0U) - { - hdma->ErrorCode = HAL_DMA_ERROR_NOT_SUPPORTED; - return HAL_ERROR; - } - - /* Get the level transfer complete flag */ - if (HAL_DMA_FULL_TRANSFER == CompleteLevel) - { - /* Transfer Complete flag */ - temp = DMA_FLAG_TC1 << (hdma->ChannelIndex & 0x1CU); - } - else - { - /* Half Transfer Complete flag */ - temp = DMA_FLAG_HT1 << (hdma->ChannelIndex & 0x1CU); - } - - /* Get tick */ - tickstart = HAL_GetTick(); - - while((hdma->DmaBaseAddress->ISR & temp) == 0U) - { - if((hdma->DmaBaseAddress->ISR & (DMA_FLAG_TE1 << (hdma->ChannelIndex& 0x1CU))) != 0U) - { - /* When a DMA transfer error occurs */ - /* A hardware clear of its EN bits is performed */ - /* Clear all flags */ - hdma->DmaBaseAddress->IFCR = (DMA_ISR_GIF1 << (hdma->ChannelIndex & 0x1CU)); - - /* Update error code */ - hdma->ErrorCode = HAL_DMA_ERROR_TE; - - /* Change the DMA state */ - hdma->State= HAL_DMA_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(hdma); - - return HAL_ERROR; - } - /* Check for the Timeout */ - if(Timeout != HAL_MAX_DELAY) - { - if(((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U)) - { - /* Update error code */ - hdma->ErrorCode = HAL_DMA_ERROR_TIMEOUT; - - /* Change the DMA state */ - hdma->State = HAL_DMA_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(hdma); - - return HAL_ERROR; - } - } - } - -#if defined(DMAMUX1) - /*Check for DMAMUX Request generator (if used) overrun status */ - if(hdma->DMAmuxRequestGen != 0U) - { - /* if using DMAMUX request generator Check for DMAMUX request generator overrun */ - if((hdma->DMAmuxRequestGenStatus->RGSR & hdma->DMAmuxRequestGenStatusMask) != 0U) - { - /* Disable the request gen overrun interrupt */ - hdma->DMAmuxRequestGen->RGCR |= DMAMUX_RGxCR_OIE; - - /* Clear the DMAMUX request generator overrun flag */ - hdma->DMAmuxRequestGenStatus->RGCFR = hdma->DMAmuxRequestGenStatusMask; - - /* Update error code */ - hdma->ErrorCode |= HAL_DMA_ERROR_REQGEN; - } - } - - /* Check for DMAMUX Synchronization overrun */ - if((hdma->DMAmuxChannelStatus->CSR & hdma->DMAmuxChannelStatusMask) != 0U) - { - /* Clear the DMAMUX synchro overrun flag */ - hdma->DMAmuxChannelStatus->CFR = hdma->DMAmuxChannelStatusMask; - - /* Update error code */ - hdma->ErrorCode |= HAL_DMA_ERROR_SYNC; - } -#endif /* DMAMUX1 */ - - if(HAL_DMA_FULL_TRANSFER == CompleteLevel) - { - /* Clear the transfer complete flag */ - hdma->DmaBaseAddress->IFCR = (DMA_FLAG_TC1 << (hdma->ChannelIndex& 0x1CU)); - - /* Process unlocked */ - __HAL_UNLOCK(hdma); - - /* The selected Channelx EN bit is cleared (DMA is disabled and - all transfers are complete) */ - hdma->State = HAL_DMA_STATE_READY; - } - else - { - /* Clear the half transfer complete flag */ - hdma->DmaBaseAddress->IFCR = (DMA_FLAG_HT1 << (hdma->ChannelIndex & 0x1CU)); - } - - return HAL_OK; -} - -/** - * @brief Handle DMA interrupt request. - * @param hdma pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA Channel. - * @retval None - */ -void HAL_DMA_IRQHandler(DMA_HandleTypeDef *hdma) -{ - uint32_t flag_it = hdma->DmaBaseAddress->ISR; - uint32_t source_it = hdma->Instance->CCR; - - /* Half Transfer Complete Interrupt management ******************************/ - if (((flag_it & (DMA_FLAG_HT1 << (hdma->ChannelIndex & 0x1CU))) != 0U) && ((source_it & DMA_IT_HT) != 0U)) - { - /* Disable the half transfer interrupt if the DMA mode is not CIRCULAR */ - if((hdma->Instance->CCR & DMA_CCR_CIRC) == 0U) - { - /* Disable the half transfer interrupt */ - __HAL_DMA_DISABLE_IT(hdma, DMA_IT_HT); - } - /* Clear the half transfer complete flag */ - hdma->DmaBaseAddress->IFCR = DMA_ISR_HTIF1 << (hdma->ChannelIndex & 0x1CU); - - /* DMA peripheral state is not updated in Half Transfer */ - /* but in Transfer Complete case */ - - if(hdma->XferHalfCpltCallback != NULL) - { - /* Half transfer callback */ - hdma->XferHalfCpltCallback(hdma); - } - } - - /* Transfer Complete Interrupt management ***********************************/ - else if (((flag_it & (DMA_FLAG_TC1 << (hdma->ChannelIndex & 0x1CU))) != 0U) && ((source_it & DMA_IT_TC) != 0U)) - { - if((hdma->Instance->CCR & DMA_CCR_CIRC) == 0U) - { - /* Disable the transfer complete interrupt if the DMA mode is not CIRCULAR */ - /* Disable the transfer complete and error interrupt */ - /* if the DMA mode is not CIRCULAR */ - __HAL_DMA_DISABLE_IT(hdma, DMA_IT_TE | DMA_IT_TC); - - /* Change the DMA state */ - hdma->State = HAL_DMA_STATE_READY; - } - /* Clear the transfer complete flag */ - hdma->DmaBaseAddress->IFCR = (DMA_ISR_TCIF1 << (hdma->ChannelIndex & 0x1CU)); - - /* Process Unlocked */ - __HAL_UNLOCK(hdma); - - if(hdma->XferCpltCallback != NULL) - { - /* Transfer complete callback */ - hdma->XferCpltCallback(hdma); - } - } - - /* Transfer Error Interrupt management **************************************/ - else if (((flag_it & (DMA_FLAG_TE1 << (hdma->ChannelIndex & 0x1CU))) != 0U) && ((source_it & DMA_IT_TE) != 0U)) - { - /* When a DMA transfer error occurs */ - /* A hardware clear of its EN bits is performed */ - /* Disable ALL DMA IT */ - __HAL_DMA_DISABLE_IT(hdma, (DMA_IT_TC | DMA_IT_HT | DMA_IT_TE)); - - /* Clear all flags */ - hdma->DmaBaseAddress->IFCR = (DMA_ISR_GIF1 << (hdma->ChannelIndex & 0x1CU)); - - /* Update error code */ - hdma->ErrorCode = HAL_DMA_ERROR_TE; - - /* Change the DMA state */ - hdma->State = HAL_DMA_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(hdma); - - if (hdma->XferErrorCallback != NULL) - { - /* Transfer error callback */ - hdma->XferErrorCallback(hdma); - } - } - else - { - /* Nothing To Do */ - } - return; -} - -/** - * @brief Register callbacks - * @param hdma pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA Channel. - * @param CallbackID User Callback identifier - * a HAL_DMA_CallbackIDTypeDef ENUM as parameter. - * @param pCallback pointer to private callbacsk function which has pointer to - * a DMA_HandleTypeDef structure as parameter. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_DMA_RegisterCallback(DMA_HandleTypeDef *hdma, HAL_DMA_CallbackIDTypeDef CallbackID, void (* pCallback)( DMA_HandleTypeDef * _hdma)) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Process locked */ - __HAL_LOCK(hdma); - - if(HAL_DMA_STATE_READY == hdma->State) - { - switch (CallbackID) - { - case HAL_DMA_XFER_CPLT_CB_ID: - hdma->XferCpltCallback = pCallback; - break; - - case HAL_DMA_XFER_HALFCPLT_CB_ID: - hdma->XferHalfCpltCallback = pCallback; - break; - - case HAL_DMA_XFER_ERROR_CB_ID: - hdma->XferErrorCallback = pCallback; - break; - - case HAL_DMA_XFER_ABORT_CB_ID: - hdma->XferAbortCallback = pCallback; - break; - - default: - status = HAL_ERROR; - break; - } - } - else - { - status = HAL_ERROR; - } - - /* Release Lock */ - __HAL_UNLOCK(hdma); - - return status; -} - -/** - * @brief UnRegister callbacks - * @param hdma pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA Channel. - * @param CallbackID User Callback identifier - * a HAL_DMA_CallbackIDTypeDef ENUM as parameter. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_DMA_UnRegisterCallback(DMA_HandleTypeDef *hdma, HAL_DMA_CallbackIDTypeDef CallbackID) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Process locked */ - __HAL_LOCK(hdma); - - if(HAL_DMA_STATE_READY == hdma->State) - { - switch (CallbackID) - { - case HAL_DMA_XFER_CPLT_CB_ID: - hdma->XferCpltCallback = NULL; - break; - - case HAL_DMA_XFER_HALFCPLT_CB_ID: - hdma->XferHalfCpltCallback = NULL; - break; - - case HAL_DMA_XFER_ERROR_CB_ID: - hdma->XferErrorCallback = NULL; - break; - - case HAL_DMA_XFER_ABORT_CB_ID: - hdma->XferAbortCallback = NULL; - break; - - case HAL_DMA_XFER_ALL_CB_ID: - hdma->XferCpltCallback = NULL; - hdma->XferHalfCpltCallback = NULL; - hdma->XferErrorCallback = NULL; - hdma->XferAbortCallback = NULL; - break; - - default: - status = HAL_ERROR; - break; - } - } - else - { - status = HAL_ERROR; - } - - /* Release Lock */ - __HAL_UNLOCK(hdma); - - return status; -} - -/** - * @} - */ - - - -/** @defgroup DMA_Exported_Functions_Group3 Peripheral State and Errors functions - * @brief Peripheral State and Errors functions - * -@verbatim - =============================================================================== - ##### Peripheral State and Errors functions ##### - =============================================================================== - [..] - This subsection provides functions allowing to - (+) Check the DMA state - (+) Get error code - -@endverbatim - * @{ - */ - -/** - * @brief Return the DMA handle state. - * @param hdma pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA Channel. - * @retval HAL state - */ -HAL_DMA_StateTypeDef HAL_DMA_GetState(DMA_HandleTypeDef *hdma) -{ - /* Return DMA handle state */ - return hdma->State; -} - -/** - * @brief Return the DMA error code. - * @param hdma : pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA Channel. - * @retval DMA Error Code - */ -uint32_t HAL_DMA_GetError(DMA_HandleTypeDef *hdma) -{ - return hdma->ErrorCode; -} - -/** - * @} - */ - -/** - * @} - */ - -/** @addtogroup DMA_Private_Functions - * @{ - */ - -/** - * @brief Sets the DMA Transfer parameter. - * @param hdma pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA Channel. - * @param SrcAddress The source memory Buffer address - * @param DstAddress The destination memory Buffer address - * @param DataLength The length of data to be transferred from source to destination - * @retval HAL status - */ -static void DMA_SetConfig(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength) -{ -#if defined(DMAMUX1) - /* Clear the DMAMUX synchro overrun flag */ - hdma->DMAmuxChannelStatus->CFR = hdma->DMAmuxChannelStatusMask; - - if(hdma->DMAmuxRequestGen != 0U) - { - /* Clear the DMAMUX request generator overrun flag */ - hdma->DMAmuxRequestGenStatus->RGCFR = hdma->DMAmuxRequestGenStatusMask; - } -#endif - - /* Clear all flags */ - hdma->DmaBaseAddress->IFCR = (DMA_ISR_GIF1 << (hdma->ChannelIndex & 0x1CU)); - - /* Configure DMA Channel data length */ - hdma->Instance->CNDTR = DataLength; - - /* Memory to Peripheral */ - if((hdma->Init.Direction) == DMA_MEMORY_TO_PERIPH) - { - /* Configure DMA Channel destination address */ - hdma->Instance->CPAR = DstAddress; - - /* Configure DMA Channel source address */ - hdma->Instance->CMAR = SrcAddress; - } - /* Peripheral to Memory */ - else - { - /* Configure DMA Channel source address */ - hdma->Instance->CPAR = SrcAddress; - - /* Configure DMA Channel destination address */ - hdma->Instance->CMAR = DstAddress; - } -} - -#if defined(DMAMUX1) - -/** - * @brief Updates the DMA handle with the DMAMUX channel and status mask depending on channel number - * @param hdma pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA Channel. - * @retval None - */ -static void DMA_CalcDMAMUXChannelBaseAndMask(DMA_HandleTypeDef *hdma) -{ - uint32_t channel_number; - - /* check if instance is not outside the DMA channel range */ - if ((uint32_t)hdma->Instance < (uint32_t)DMA2_Channel1) - { - /* DMA1 */ - hdma->DMAmuxChannel = (DMAMUX1_Channel0 + (hdma->ChannelIndex >> 2U)); - } - else - { - /* DMA2 */ - hdma->DMAmuxChannel = (DMAMUX1_Channel7 + (hdma->ChannelIndex >> 2U)); - } - - channel_number = (((uint32_t)hdma->Instance & 0xFFU) - 8U) / 20U; - hdma->DMAmuxChannelStatus = DMAMUX1_ChannelStatus; - hdma->DMAmuxChannelStatusMask = 1UL << (channel_number & 0x1FU); -} - -/** - * @brief Updates the DMA handle with the DMAMUX request generator params - * @param hdma pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA Channel. - * @retval None - */ - -static void DMA_CalcDMAMUXRequestGenBaseAndMask(DMA_HandleTypeDef *hdma) -{ - uint32_t request = hdma->Init.Request & DMAMUX_CxCR_DMAREQ_ID; - - /* DMA Channels are connected to DMAMUX1 request generator blocks*/ - hdma->DMAmuxRequestGen = (DMAMUX_RequestGen_TypeDef *)((uint32_t)(((uint32_t)DMAMUX1_RequestGenerator0) + ((request - 1U) * 4U))); - - hdma->DMAmuxRequestGenStatus = DMAMUX1_RequestGenStatus; - - /* here "Request" is either DMA_REQUEST_GENERATOR0 to DMA_REQUEST_GENERATOR3, i.e. <= 4*/ - hdma->DMAmuxRequestGenStatusMask = 1UL << ((request - 1U) & 0x3U); -} - -#endif /* DMAMUX1 */ - -/** - * @} - */ - -/** - * @} - */ - -#endif /* HAL_DMA_MODULE_ENABLED */ -/** - * @} - */ - -/** - * @} - */ +/** + ****************************************************************************** + * @file stm32l4xx_hal_dma.c + * @author MCD Application Team + * @brief DMA HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Direct Memory Access (DMA) peripheral: + * + Initialization and de-initialization functions + * + IO operation functions + * + Peripheral State and errors functions + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + (#) Enable and configure the peripheral to be connected to the DMA Channel + (except for internal SRAM / FLASH memories: no initialization is + necessary). Please refer to the Reference manual for connection between peripherals + and DMA requests. + + (#) For a given Channel, program the required configuration through the following parameters: + Channel request, Transfer Direction, Source and Destination data formats, + Circular or Normal mode, Channel Priority level, Source and Destination Increment mode + using HAL_DMA_Init() function. + + Prior to HAL_DMA_Init the peripheral clock shall be enabled for both DMA & DMAMUX + thanks to: + (##) DMA1 or DMA2: __HAL_RCC_DMA1_CLK_ENABLE() or __HAL_RCC_DMA2_CLK_ENABLE() ; + (##) DMAMUX1: __HAL_RCC_DMAMUX1_CLK_ENABLE(); + + (#) Use HAL_DMA_GetState() function to return the DMA state and HAL_DMA_GetError() in case of error + detection. + + (#) Use HAL_DMA_Abort() function to abort the current transfer + + -@- In Memory-to-Memory transfer mode, Circular mode is not allowed. + + *** Polling mode IO operation *** + ================================= + [..] + (+) Use HAL_DMA_Start() to start DMA transfer after the configuration of Source + address and destination address and the Length of data to be transferred + (+) Use HAL_DMA_PollForTransfer() to poll for the end of current transfer, in this + case a fixed Timeout can be configured by User depending from his application. + + *** Interrupt mode IO operation *** + =================================== + [..] + (+) Configure the DMA interrupt priority using HAL_NVIC_SetPriority() + (+) Enable the DMA IRQ handler using HAL_NVIC_EnableIRQ() + (+) Use HAL_DMA_Start_IT() to start DMA transfer after the configuration of + Source address and destination address and the Length of data to be transferred. + In this case the DMA interrupt is configured + (+) Use HAL_DMA_IRQHandler() called under DMA_IRQHandler() Interrupt subroutine + (+) At the end of data transfer HAL_DMA_IRQHandler() function is executed and user can + add his own function to register callbacks with HAL_DMA_RegisterCallback(). + + *** DMA HAL driver macros list *** + ============================================= + [..] + Below the list of macros in DMA HAL driver. + + (+) __HAL_DMA_ENABLE: Enable the specified DMA Channel. + (+) __HAL_DMA_DISABLE: Disable the specified DMA Channel. + (+) __HAL_DMA_GET_FLAG: Get the DMA Channel pending flags. + (+) __HAL_DMA_CLEAR_FLAG: Clear the DMA Channel pending flags. + (+) __HAL_DMA_ENABLE_IT: Enable the specified DMA Channel interrupts. + (+) __HAL_DMA_DISABLE_IT: Disable the specified DMA Channel interrupts. + (+) __HAL_DMA_GET_IT_SOURCE: Check whether the specified DMA Channel interrupt is enabled or not. + + [..] + (@) You can refer to the DMA HAL driver header file for more useful macros + + @endverbatim + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l4xx_hal.h" + +/** @addtogroup STM32L4xx_HAL_Driver + * @{ + */ + +/** @defgroup DMA DMA + * @brief DMA HAL module driver + * @{ + */ + +#ifdef HAL_DMA_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/** @defgroup DMA_Private_Functions DMA Private Functions + * @{ + */ +static void DMA_SetConfig(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength); +#if defined(DMAMUX1) +static void DMA_CalcDMAMUXChannelBaseAndMask(DMA_HandleTypeDef *hdma); +static void DMA_CalcDMAMUXRequestGenBaseAndMask(DMA_HandleTypeDef *hdma); +#endif /* DMAMUX1 */ + +/** + * @} + */ + +/* Exported functions ---------------------------------------------------------*/ + +/** @defgroup DMA_Exported_Functions DMA Exported Functions + * @{ + */ + +/** @defgroup DMA_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and de-initialization functions + * +@verbatim + =============================================================================== + ##### Initialization and de-initialization functions ##### + =============================================================================== + [..] + This section provides functions allowing to initialize the DMA Channel source + and destination addresses, incrementation and data sizes, transfer direction, + circular/normal mode selection, memory-to-memory mode selection and Channel priority value. + [..] + The HAL_DMA_Init() function follows the DMA configuration procedures as described in + reference manual. + +@endverbatim + * @{ + */ + +/** + * @brief Initialize the DMA according to the specified + * parameters in the DMA_InitTypeDef and initialize the associated handle. + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Channel. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMA_Init(DMA_HandleTypeDef *hdma) +{ + uint32_t tmp; + + /* Check the DMA handle allocation */ + if (hdma == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_DMA_ALL_INSTANCE(hdma->Instance)); + assert_param(IS_DMA_DIRECTION(hdma->Init.Direction)); + assert_param(IS_DMA_PERIPHERAL_INC_STATE(hdma->Init.PeriphInc)); + assert_param(IS_DMA_MEMORY_INC_STATE(hdma->Init.MemInc)); + assert_param(IS_DMA_PERIPHERAL_DATA_SIZE(hdma->Init.PeriphDataAlignment)); + assert_param(IS_DMA_MEMORY_DATA_SIZE(hdma->Init.MemDataAlignment)); + assert_param(IS_DMA_MODE(hdma->Init.Mode)); + assert_param(IS_DMA_PRIORITY(hdma->Init.Priority)); + + assert_param(IS_DMA_ALL_REQUEST(hdma->Init.Request)); + + /* Compute the channel index */ + if ((uint32_t)(hdma->Instance) < (uint32_t)(DMA2_Channel1)) + { + /* DMA1 */ + hdma->ChannelIndex = (((uint32_t)hdma->Instance - (uint32_t)DMA1_Channel1) / ((uint32_t)DMA1_Channel2 - (uint32_t)DMA1_Channel1)) << 2U; + hdma->DmaBaseAddress = DMA1; + } + else + { + /* DMA2 */ + hdma->ChannelIndex = (((uint32_t)hdma->Instance - (uint32_t)DMA2_Channel1) / ((uint32_t)DMA2_Channel2 - (uint32_t)DMA2_Channel1)) << 2U; + hdma->DmaBaseAddress = DMA2; + } + + /* Change DMA peripheral state */ + hdma->State = HAL_DMA_STATE_BUSY; + + /* Get the CR register value */ + tmp = hdma->Instance->CCR; + + /* Clear PL, MSIZE, PSIZE, MINC, PINC, CIRC, DIR and MEM2MEM bits */ + tmp &= ((uint32_t)~(DMA_CCR_PL | DMA_CCR_MSIZE | DMA_CCR_PSIZE | + DMA_CCR_MINC | DMA_CCR_PINC | DMA_CCR_CIRC | + DMA_CCR_DIR | DMA_CCR_MEM2MEM)); + + /* Prepare the DMA Channel configuration */ + tmp |= hdma->Init.Direction | + hdma->Init.PeriphInc | hdma->Init.MemInc | + hdma->Init.PeriphDataAlignment | hdma->Init.MemDataAlignment | + hdma->Init.Mode | hdma->Init.Priority; + + /* Write to DMA Channel CR register */ + hdma->Instance->CCR = tmp; + +#if defined(DMAMUX1) + /* Initialize parameters for DMAMUX channel : + DMAmuxChannel, DMAmuxChannelStatus and DMAmuxChannelStatusMask + */ + DMA_CalcDMAMUXChannelBaseAndMask(hdma); + + if (hdma->Init.Direction == DMA_MEMORY_TO_MEMORY) + { + /* if memory to memory force the request to 0*/ + hdma->Init.Request = DMA_REQUEST_MEM2MEM; + } + + /* Set peripheral request to DMAMUX channel */ + hdma->DMAmuxChannel->CCR = (hdma->Init.Request & DMAMUX_CxCR_DMAREQ_ID); + + /* Clear the DMAMUX synchro overrun flag */ + hdma->DMAmuxChannelStatus->CFR = hdma->DMAmuxChannelStatusMask; + + if (((hdma->Init.Request > 0U) && (hdma->Init.Request <= DMA_REQUEST_GENERATOR3))) + { + /* Initialize parameters for DMAMUX request generator : + DMAmuxRequestGen, DMAmuxRequestGenStatus and DMAmuxRequestGenStatusMask + */ + DMA_CalcDMAMUXRequestGenBaseAndMask(hdma); + + /* Reset the DMAMUX request generator register*/ + hdma->DMAmuxRequestGen->RGCR = 0U; + + /* Clear the DMAMUX request generator overrun flag */ + hdma->DMAmuxRequestGenStatus->RGCFR = hdma->DMAmuxRequestGenStatusMask; + } + else + { + hdma->DMAmuxRequestGen = 0U; + hdma->DMAmuxRequestGenStatus = 0U; + hdma->DMAmuxRequestGenStatusMask = 0U; + } +#endif /* DMAMUX1 */ + +#if !defined (DMAMUX1) + + /* Set request selection */ + if (hdma->Init.Direction != DMA_MEMORY_TO_MEMORY) + { + /* Write to DMA channel selection register */ + if (DMA1 == hdma->DmaBaseAddress) + { + /* Reset request selection for DMA1 Channelx */ + DMA1_CSELR->CSELR &= ~(DMA_CSELR_C1S << (hdma->ChannelIndex & 0x1cU)); + + /* Configure request selection for DMA1 Channelx */ + DMA1_CSELR->CSELR |= (uint32_t)(hdma->Init.Request << (hdma->ChannelIndex & 0x1cU)); + } + else /* DMA2 */ + { + /* Reset request selection for DMA2 Channelx */ + DMA2_CSELR->CSELR &= ~(DMA_CSELR_C1S << (hdma->ChannelIndex & 0x1cU)); + + /* Configure request selection for DMA2 Channelx */ + DMA2_CSELR->CSELR |= (uint32_t)(hdma->Init.Request << (hdma->ChannelIndex & 0x1cU)); + } + } + +#endif /* STM32L431xx || STM32L432xx || STM32L433xx || STM32L442xx || STM32L443xx */ + /* STM32L471xx || STM32L475xx || STM32L476xx || STM32L442xx || STM32L486xx */ + /* STM32L496xx || STM32L4A6xx */ + + /* Initialise the error code */ + hdma->ErrorCode = HAL_DMA_ERROR_NONE; + + /* Initialize the DMA state*/ + hdma->State = HAL_DMA_STATE_READY; + + /* Allocate lock resource and initialize it */ + hdma->Lock = HAL_UNLOCKED; + + return HAL_OK; +} + +/** + * @brief DeInitialize the DMA peripheral. + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Channel. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMA_DeInit(DMA_HandleTypeDef *hdma) +{ + + /* Check the DMA handle allocation */ + if (NULL == hdma) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_DMA_ALL_INSTANCE(hdma->Instance)); + + /* Disable the selected DMA Channelx */ + __HAL_DMA_DISABLE(hdma); + + /* Compute the channel index */ + if ((uint32_t)(hdma->Instance) < (uint32_t)(DMA2_Channel1)) + { + /* DMA1 */ + hdma->ChannelIndex = (((uint32_t)hdma->Instance - (uint32_t)DMA1_Channel1) / ((uint32_t)DMA1_Channel2 - (uint32_t)DMA1_Channel1)) << 2U; + hdma->DmaBaseAddress = DMA1; + } + else + { + /* DMA2 */ + hdma->ChannelIndex = (((uint32_t)hdma->Instance - (uint32_t)DMA2_Channel1) / ((uint32_t)DMA2_Channel2 - (uint32_t)DMA2_Channel1)) << 2U; + hdma->DmaBaseAddress = DMA2; + } + + /* Reset DMA Channel control register */ + hdma->Instance->CCR = 0U; + + /* Clear all flags */ + hdma->DmaBaseAddress->IFCR = (DMA_ISR_GIF1 << (hdma->ChannelIndex & 0x1CU)); + +#if !defined (DMAMUX1) + + /* Reset DMA channel selection register */ + if (DMA1 == hdma->DmaBaseAddress) + { + /* DMA1 */ + DMA1_CSELR->CSELR &= ~(DMA_CSELR_C1S << (hdma->ChannelIndex & 0x1cU)); + } + else + { + /* DMA2 */ + DMA2_CSELR->CSELR &= ~(DMA_CSELR_C1S << (hdma->ChannelIndex & 0x1cU)); + } +#endif /* STM32L431xx || STM32L432xx || STM32L433xx || STM32L442xx || STM32L443xx */ + /* STM32L471xx || STM32L475xx || STM32L476xx || STM32L442xx || STM32L486xx */ + /* STM32L496xx || STM32L4A6xx */ + +#if defined(DMAMUX1) + + /* Initialize parameters for DMAMUX channel : + DMAmuxChannel, DMAmuxChannelStatus and DMAmuxChannelStatusMask */ + + DMA_CalcDMAMUXChannelBaseAndMask(hdma); + + /* Reset the DMAMUX channel that corresponds to the DMA channel */ + hdma->DMAmuxChannel->CCR = 0U; + + /* Clear the DMAMUX synchro overrun flag */ + hdma->DMAmuxChannelStatus->CFR = hdma->DMAmuxChannelStatusMask; + + /* Reset Request generator parameters if any */ + if (((hdma->Init.Request > 0U) && (hdma->Init.Request <= DMA_REQUEST_GENERATOR3))) + { + /* Initialize parameters for DMAMUX request generator : + DMAmuxRequestGen, DMAmuxRequestGenStatus and DMAmuxRequestGenStatusMask + */ + DMA_CalcDMAMUXRequestGenBaseAndMask(hdma); + + /* Reset the DMAMUX request generator register*/ + hdma->DMAmuxRequestGen->RGCR = 0U; + + /* Clear the DMAMUX request generator overrun flag */ + hdma->DMAmuxRequestGenStatus->RGCFR = hdma->DMAmuxRequestGenStatusMask; + } + + hdma->DMAmuxRequestGen = 0U; + hdma->DMAmuxRequestGenStatus = 0U; + hdma->DMAmuxRequestGenStatusMask = 0U; + +#endif /* DMAMUX1 */ + + /* Clean callbacks */ + hdma->XferCpltCallback = NULL; + hdma->XferHalfCpltCallback = NULL; + hdma->XferErrorCallback = NULL; + hdma->XferAbortCallback = NULL; + + /* Initialise the error code */ + hdma->ErrorCode = HAL_DMA_ERROR_NONE; + + /* Initialize the DMA state */ + hdma->State = HAL_DMA_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(hdma); + + return HAL_OK; +} + +/** + * @} + */ + +/** @defgroup DMA_Exported_Functions_Group2 Input and Output operation functions + * @brief Input and Output operation functions + * +@verbatim + =============================================================================== + ##### IO operation functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Configure the source, destination address and data length and Start DMA transfer + (+) Configure the source, destination address and data length and + Start DMA transfer with interrupt + (+) Abort DMA transfer + (+) Poll for transfer complete + (+) Handle DMA interrupt request + +@endverbatim + * @{ + */ + +/** + * @brief Start the DMA Transfer. + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Channel. + * @param SrcAddress The source memory Buffer address + * @param DstAddress The destination memory Buffer address + * @param DataLength The length of data to be transferred from source to destination + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMA_Start(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_DMA_BUFFER_SIZE(DataLength)); + + /* Process locked */ + __HAL_LOCK(hdma); + + if (HAL_DMA_STATE_READY == hdma->State) + { + /* Change DMA peripheral state */ + hdma->State = HAL_DMA_STATE_BUSY; + hdma->ErrorCode = HAL_DMA_ERROR_NONE; + + /* Disable the peripheral */ + __HAL_DMA_DISABLE(hdma); + + /* Configure the source, destination address and the data length & clear flags*/ + DMA_SetConfig(hdma, SrcAddress, DstAddress, DataLength); + + /* Enable the Peripheral */ + __HAL_DMA_ENABLE(hdma); + } + else + { + /* Process Unlocked */ + __HAL_UNLOCK(hdma); + status = HAL_BUSY; + } + return status; +} + +/** + * @brief Start the DMA Transfer with interrupt enabled. + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Channel. + * @param SrcAddress The source memory Buffer address + * @param DstAddress The destination memory Buffer address + * @param DataLength The length of data to be transferred from source to destination + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMA_Start_IT(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_DMA_BUFFER_SIZE(DataLength)); + + /* Process locked */ + __HAL_LOCK(hdma); + + if (HAL_DMA_STATE_READY == hdma->State) + { + /* Change DMA peripheral state */ + hdma->State = HAL_DMA_STATE_BUSY; + hdma->ErrorCode = HAL_DMA_ERROR_NONE; + + /* Disable the peripheral */ + __HAL_DMA_DISABLE(hdma); + + /* Configure the source, destination address and the data length & clear flags*/ + DMA_SetConfig(hdma, SrcAddress, DstAddress, DataLength); + + /* Enable the transfer complete interrupt */ + /* Enable the transfer Error interrupt */ + if (NULL != hdma->XferHalfCpltCallback) + { + /* Enable the Half transfer complete interrupt as well */ + __HAL_DMA_ENABLE_IT(hdma, (DMA_IT_TC | DMA_IT_HT | DMA_IT_TE)); + } + else + { + __HAL_DMA_DISABLE_IT(hdma, DMA_IT_HT); + __HAL_DMA_ENABLE_IT(hdma, (DMA_IT_TC | DMA_IT_TE)); + } + +#ifdef DMAMUX1 + + /* Check if DMAMUX Synchronization is enabled*/ + if ((hdma->DMAmuxChannel->CCR & DMAMUX_CxCR_SE) != 0U) + { + /* Enable DMAMUX sync overrun IT*/ + hdma->DMAmuxChannel->CCR |= DMAMUX_CxCR_SOIE; + } + + if (hdma->DMAmuxRequestGen != 0U) + { + /* if using DMAMUX request generator, enable the DMAMUX request generator overrun IT*/ + /* enable the request gen overrun IT*/ + hdma->DMAmuxRequestGen->RGCR |= DMAMUX_RGxCR_OIE; + } + +#endif /* DMAMUX1 */ + + /* Enable the Peripheral */ + __HAL_DMA_ENABLE(hdma); + } + else + { + /* Process Unlocked */ + __HAL_UNLOCK(hdma); + + /* Remain BUSY */ + status = HAL_BUSY; + } + return status; +} + +/** + * @brief Abort the DMA Transfer. + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Channel. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMA_Abort(DMA_HandleTypeDef *hdma) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the DMA peripheral state */ + if (hdma->State != HAL_DMA_STATE_BUSY) + { + hdma->ErrorCode = HAL_DMA_ERROR_NO_XFER; + + /* Process Unlocked */ + __HAL_UNLOCK(hdma); + + return HAL_ERROR; + } + else + { + /* Disable DMA IT */ + __HAL_DMA_DISABLE_IT(hdma, (DMA_IT_TC | DMA_IT_HT | DMA_IT_TE)); + +#if defined(DMAMUX1) + /* disable the DMAMUX sync overrun IT*/ + hdma->DMAmuxChannel->CCR &= ~DMAMUX_CxCR_SOIE; +#endif /* DMAMUX1 */ + + /* Disable the channel */ + __HAL_DMA_DISABLE(hdma); + + /* Clear all flags */ + hdma->DmaBaseAddress->IFCR = (DMA_ISR_GIF1 << (hdma->ChannelIndex & 0x1CU)); + +#if defined(DMAMUX1) + /* Clear the DMAMUX synchro overrun flag */ + hdma->DMAmuxChannelStatus->CFR = hdma->DMAmuxChannelStatusMask; + + if (hdma->DMAmuxRequestGen != 0U) + { + /* if using DMAMUX request generator, disable the DMAMUX request generator overrun IT*/ + /* disable the request gen overrun IT*/ + hdma->DMAmuxRequestGen->RGCR &= ~DMAMUX_RGxCR_OIE; + + /* Clear the DMAMUX request generator overrun flag */ + hdma->DMAmuxRequestGenStatus->RGCFR = hdma->DMAmuxRequestGenStatusMask; + } + +#endif /* DMAMUX1 */ + + /* Change the DMA state */ + hdma->State = HAL_DMA_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hdma); + + return status; + } +} + +/** + * @brief Aborts the DMA Transfer in Interrupt mode. + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Channel. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMA_Abort_IT(DMA_HandleTypeDef *hdma) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (HAL_DMA_STATE_BUSY != hdma->State) + { + /* no transfer ongoing */ + hdma->ErrorCode = HAL_DMA_ERROR_NO_XFER; + + status = HAL_ERROR; + } + else + { + /* Disable DMA IT */ + __HAL_DMA_DISABLE_IT(hdma, (DMA_IT_TC | DMA_IT_HT | DMA_IT_TE)); + + /* Disable the channel */ + __HAL_DMA_DISABLE(hdma); + +#if defined(DMAMUX1) + /* disable the DMAMUX sync overrun IT*/ + hdma->DMAmuxChannel->CCR &= ~DMAMUX_CxCR_SOIE; + + /* Clear all flags */ + hdma->DmaBaseAddress->IFCR = (DMA_ISR_GIF1 << (hdma->ChannelIndex & 0x1CU)); + + /* Clear the DMAMUX synchro overrun flag */ + hdma->DMAmuxChannelStatus->CFR = hdma->DMAmuxChannelStatusMask; + + if (hdma->DMAmuxRequestGen != 0U) + { + /* if using DMAMUX request generator, disable the DMAMUX request generator overrun IT*/ + /* disable the request gen overrun IT*/ + hdma->DMAmuxRequestGen->RGCR &= ~DMAMUX_RGxCR_OIE; + + /* Clear the DMAMUX request generator overrun flag */ + hdma->DMAmuxRequestGenStatus->RGCFR = hdma->DMAmuxRequestGenStatusMask; + } + +#else + /* Clear all flags */ + hdma->DmaBaseAddress->IFCR = (DMA_ISR_GIF1 << (hdma->ChannelIndex & 0x1CU)); +#endif /* DMAMUX1 */ + + /* Change the DMA state */ + hdma->State = HAL_DMA_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hdma); + + /* Call User Abort callback */ + if (hdma->XferAbortCallback != NULL) + { + hdma->XferAbortCallback(hdma); + } + } + return status; +} + +/** + * @brief Polling for transfer complete. + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Channel. + * @param CompleteLevel Specifies the DMA level complete. + * @param Timeout Timeout duration. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMA_PollForTransfer(DMA_HandleTypeDef *hdma, HAL_DMA_LevelCompleteTypeDef CompleteLevel, uint32_t Timeout) +{ + uint32_t temp; + uint32_t tickstart; + + if (HAL_DMA_STATE_BUSY != hdma->State) + { + /* no transfer ongoing */ + hdma->ErrorCode = HAL_DMA_ERROR_NO_XFER; + __HAL_UNLOCK(hdma); + return HAL_ERROR; + } + + /* Polling mode not supported in circular mode */ + if ((hdma->Instance->CCR & DMA_CCR_CIRC) != 0U) + { + hdma->ErrorCode = HAL_DMA_ERROR_NOT_SUPPORTED; + return HAL_ERROR; + } + + /* Get the level transfer complete flag */ + if (HAL_DMA_FULL_TRANSFER == CompleteLevel) + { + /* Transfer Complete flag */ + temp = DMA_FLAG_TC1 << (hdma->ChannelIndex & 0x1CU); + } + else + { + /* Half Transfer Complete flag */ + temp = DMA_FLAG_HT1 << (hdma->ChannelIndex & 0x1CU); + } + + /* Get tick */ + tickstart = HAL_GetTick(); + + while ((hdma->DmaBaseAddress->ISR & temp) == 0U) + { + if ((hdma->DmaBaseAddress->ISR & (DMA_FLAG_TE1 << (hdma->ChannelIndex & 0x1CU))) != 0U) + { + /* When a DMA transfer error occurs */ + /* A hardware clear of its EN bits is performed */ + /* Clear all flags */ + hdma->DmaBaseAddress->IFCR = (DMA_ISR_GIF1 << (hdma->ChannelIndex & 0x1CU)); + + /* Update error code */ + hdma->ErrorCode = HAL_DMA_ERROR_TE; + + /* Change the DMA state */ + hdma->State = HAL_DMA_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hdma); + + return HAL_ERROR; + } + /* Check for the Timeout */ + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U)) + { + /* Update error code */ + hdma->ErrorCode = HAL_DMA_ERROR_TIMEOUT; + + /* Change the DMA state */ + hdma->State = HAL_DMA_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hdma); + + return HAL_ERROR; + } + } + } + +#if defined(DMAMUX1) + /*Check for DMAMUX Request generator (if used) overrun status */ + if (hdma->DMAmuxRequestGen != 0U) + { + /* if using DMAMUX request generator Check for DMAMUX request generator overrun */ + if ((hdma->DMAmuxRequestGenStatus->RGSR & hdma->DMAmuxRequestGenStatusMask) != 0U) + { + /* Disable the request gen overrun interrupt */ + hdma->DMAmuxRequestGen->RGCR |= DMAMUX_RGxCR_OIE; + + /* Clear the DMAMUX request generator overrun flag */ + hdma->DMAmuxRequestGenStatus->RGCFR = hdma->DMAmuxRequestGenStatusMask; + + /* Update error code */ + hdma->ErrorCode |= HAL_DMA_ERROR_REQGEN; + } + } + + /* Check for DMAMUX Synchronization overrun */ + if ((hdma->DMAmuxChannelStatus->CSR & hdma->DMAmuxChannelStatusMask) != 0U) + { + /* Clear the DMAMUX synchro overrun flag */ + hdma->DMAmuxChannelStatus->CFR = hdma->DMAmuxChannelStatusMask; + + /* Update error code */ + hdma->ErrorCode |= HAL_DMA_ERROR_SYNC; + } +#endif /* DMAMUX1 */ + + if (HAL_DMA_FULL_TRANSFER == CompleteLevel) + { + /* Clear the transfer complete flag */ + hdma->DmaBaseAddress->IFCR = (DMA_FLAG_TC1 << (hdma->ChannelIndex & 0x1CU)); + + /* Process unlocked */ + __HAL_UNLOCK(hdma); + + /* The selected Channelx EN bit is cleared (DMA is disabled and + all transfers are complete) */ + hdma->State = HAL_DMA_STATE_READY; + } + else + { + /* Clear the half transfer complete flag */ + hdma->DmaBaseAddress->IFCR = (DMA_FLAG_HT1 << (hdma->ChannelIndex & 0x1CU)); + } + + return HAL_OK; +} + +/** + * @brief Handle DMA interrupt request. + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Channel. + * @retval None + */ +void HAL_DMA_IRQHandler(DMA_HandleTypeDef *hdma) +{ + uint32_t flag_it = hdma->DmaBaseAddress->ISR; + uint32_t source_it = hdma->Instance->CCR; + + /* Half Transfer Complete Interrupt management ******************************/ + if (((flag_it & (DMA_FLAG_HT1 << (hdma->ChannelIndex & 0x1CU))) != 0U) && ((source_it & DMA_IT_HT) != 0U)) + { + /* Disable the half transfer interrupt if the DMA mode is not CIRCULAR */ + if ((hdma->Instance->CCR & DMA_CCR_CIRC) == 0U) + { + /* Disable the half transfer interrupt */ + __HAL_DMA_DISABLE_IT(hdma, DMA_IT_HT); + } + /* Clear the half transfer complete flag */ + hdma->DmaBaseAddress->IFCR = DMA_ISR_HTIF1 << (hdma->ChannelIndex & 0x1CU); + + /* DMA peripheral state is not updated in Half Transfer */ + /* but in Transfer Complete case */ + + if (hdma->XferHalfCpltCallback != NULL) + { + /* Half transfer callback */ + hdma->XferHalfCpltCallback(hdma); + } + } + + /* Transfer Complete Interrupt management ***********************************/ + else if (((flag_it & (DMA_FLAG_TC1 << (hdma->ChannelIndex & 0x1CU))) != 0U) && ((source_it & DMA_IT_TC) != 0U)) + { + if ((hdma->Instance->CCR & DMA_CCR_CIRC) == 0U) + { + /* Disable the transfer complete interrupt if the DMA mode is not CIRCULAR */ + /* Disable the transfer complete and error interrupt */ + /* if the DMA mode is not CIRCULAR */ + __HAL_DMA_DISABLE_IT(hdma, DMA_IT_TE | DMA_IT_TC); + + /* Change the DMA state */ + hdma->State = HAL_DMA_STATE_READY; + } + /* Clear the transfer complete flag */ + hdma->DmaBaseAddress->IFCR = (DMA_ISR_TCIF1 << (hdma->ChannelIndex & 0x1CU)); + + /* Process Unlocked */ + __HAL_UNLOCK(hdma); + + if (hdma->XferCpltCallback != NULL) + { + /* Transfer complete callback */ + hdma->XferCpltCallback(hdma); + } + } + + /* Transfer Error Interrupt management **************************************/ + else if (((flag_it & (DMA_FLAG_TE1 << (hdma->ChannelIndex & 0x1CU))) != 0U) && ((source_it & DMA_IT_TE) != 0U)) + { + /* When a DMA transfer error occurs */ + /* A hardware clear of its EN bits is performed */ + /* Disable ALL DMA IT */ + __HAL_DMA_DISABLE_IT(hdma, (DMA_IT_TC | DMA_IT_HT | DMA_IT_TE)); + + /* Clear all flags */ + hdma->DmaBaseAddress->IFCR = (DMA_ISR_GIF1 << (hdma->ChannelIndex & 0x1CU)); + + /* Update error code */ + hdma->ErrorCode = HAL_DMA_ERROR_TE; + + /* Change the DMA state */ + hdma->State = HAL_DMA_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hdma); + + if (hdma->XferErrorCallback != NULL) + { + /* Transfer error callback */ + hdma->XferErrorCallback(hdma); + } + } + else + { + /* Nothing To Do */ + } + return; +} + +/** + * @brief Register callbacks + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Channel. + * @param CallbackID User Callback identifier + * a HAL_DMA_CallbackIDTypeDef ENUM as parameter. + * @param pCallback pointer to private callback function which has pointer to + * a DMA_HandleTypeDef structure as parameter. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMA_RegisterCallback(DMA_HandleTypeDef *hdma, HAL_DMA_CallbackIDTypeDef CallbackID, void (* pCallback)(DMA_HandleTypeDef *_hdma)) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process locked */ + __HAL_LOCK(hdma); + + if (HAL_DMA_STATE_READY == hdma->State) + { + switch (CallbackID) + { + case HAL_DMA_XFER_CPLT_CB_ID: + hdma->XferCpltCallback = pCallback; + break; + + case HAL_DMA_XFER_HALFCPLT_CB_ID: + hdma->XferHalfCpltCallback = pCallback; + break; + + case HAL_DMA_XFER_ERROR_CB_ID: + hdma->XferErrorCallback = pCallback; + break; + + case HAL_DMA_XFER_ABORT_CB_ID: + hdma->XferAbortCallback = pCallback; + break; + + default: + status = HAL_ERROR; + break; + } + } + else + { + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hdma); + + return status; +} + +/** + * @brief UnRegister callbacks + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Channel. + * @param CallbackID User Callback identifier + * a HAL_DMA_CallbackIDTypeDef ENUM as parameter. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMA_UnRegisterCallback(DMA_HandleTypeDef *hdma, HAL_DMA_CallbackIDTypeDef CallbackID) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process locked */ + __HAL_LOCK(hdma); + + if (HAL_DMA_STATE_READY == hdma->State) + { + switch (CallbackID) + { + case HAL_DMA_XFER_CPLT_CB_ID: + hdma->XferCpltCallback = NULL; + break; + + case HAL_DMA_XFER_HALFCPLT_CB_ID: + hdma->XferHalfCpltCallback = NULL; + break; + + case HAL_DMA_XFER_ERROR_CB_ID: + hdma->XferErrorCallback = NULL; + break; + + case HAL_DMA_XFER_ABORT_CB_ID: + hdma->XferAbortCallback = NULL; + break; + + case HAL_DMA_XFER_ALL_CB_ID: + hdma->XferCpltCallback = NULL; + hdma->XferHalfCpltCallback = NULL; + hdma->XferErrorCallback = NULL; + hdma->XferAbortCallback = NULL; + break; + + default: + status = HAL_ERROR; + break; + } + } + else + { + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hdma); + + return status; +} + +/** + * @} + */ + + + +/** @defgroup DMA_Exported_Functions_Group3 Peripheral State and Errors functions + * @brief Peripheral State and Errors functions + * +@verbatim + =============================================================================== + ##### Peripheral State and Errors functions ##### + =============================================================================== + [..] + This subsection provides functions allowing to + (+) Check the DMA state + (+) Get error code + +@endverbatim + * @{ + */ + +/** + * @brief Return the DMA handle state. + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Channel. + * @retval HAL state + */ +HAL_DMA_StateTypeDef HAL_DMA_GetState(DMA_HandleTypeDef *hdma) +{ + /* Return DMA handle state */ + return hdma->State; +} + +/** + * @brief Return the DMA error code. + * @param hdma : pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Channel. + * @retval DMA Error Code + */ +uint32_t HAL_DMA_GetError(DMA_HandleTypeDef *hdma) +{ + return hdma->ErrorCode; +} + +/** + * @} + */ + +/** + * @} + */ + +/** @addtogroup DMA_Private_Functions + * @{ + */ + +/** + * @brief Sets the DMA Transfer parameter. + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Channel. + * @param SrcAddress The source memory Buffer address + * @param DstAddress The destination memory Buffer address + * @param DataLength The length of data to be transferred from source to destination + * @retval HAL status + */ +static void DMA_SetConfig(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength) +{ +#if defined(DMAMUX1) + /* Clear the DMAMUX synchro overrun flag */ + hdma->DMAmuxChannelStatus->CFR = hdma->DMAmuxChannelStatusMask; + + if (hdma->DMAmuxRequestGen != 0U) + { + /* Clear the DMAMUX request generator overrun flag */ + hdma->DMAmuxRequestGenStatus->RGCFR = hdma->DMAmuxRequestGenStatusMask; + } +#endif + + /* Clear all flags */ + hdma->DmaBaseAddress->IFCR = (DMA_ISR_GIF1 << (hdma->ChannelIndex & 0x1CU)); + + /* Configure DMA Channel data length */ + hdma->Instance->CNDTR = DataLength; + + /* Memory to Peripheral */ + if ((hdma->Init.Direction) == DMA_MEMORY_TO_PERIPH) + { + /* Configure DMA Channel destination address */ + hdma->Instance->CPAR = DstAddress; + + /* Configure DMA Channel source address */ + hdma->Instance->CMAR = SrcAddress; + } + /* Peripheral to Memory */ + else + { + /* Configure DMA Channel source address */ + hdma->Instance->CPAR = SrcAddress; + + /* Configure DMA Channel destination address */ + hdma->Instance->CMAR = DstAddress; + } +} + +#if defined(DMAMUX1) + +/** + * @brief Updates the DMA handle with the DMAMUX channel and status mask depending on channel number + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Channel. + * @retval None + */ +static void DMA_CalcDMAMUXChannelBaseAndMask(DMA_HandleTypeDef *hdma) +{ + uint32_t channel_number; + + /* check if instance is not outside the DMA channel range */ + if ((uint32_t)hdma->Instance < (uint32_t)DMA2_Channel1) + { + /* DMA1 */ + hdma->DMAmuxChannel = (DMAMUX1_Channel0 + (hdma->ChannelIndex >> 2U)); + } + else + { + /* DMA2 */ + hdma->DMAmuxChannel = (DMAMUX1_Channel7 + (hdma->ChannelIndex >> 2U)); + } + + channel_number = (((uint32_t)hdma->Instance & 0xFFU) - 8U) / 20U; + hdma->DMAmuxChannelStatus = DMAMUX1_ChannelStatus; + hdma->DMAmuxChannelStatusMask = 1UL << (channel_number & 0x1FU); +} + +/** + * @brief Updates the DMA handle with the DMAMUX request generator params + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Channel. + * @retval None + */ + +static void DMA_CalcDMAMUXRequestGenBaseAndMask(DMA_HandleTypeDef *hdma) +{ + uint32_t request = hdma->Init.Request & DMAMUX_CxCR_DMAREQ_ID; + + /* DMA Channels are connected to DMAMUX1 request generator blocks*/ + hdma->DMAmuxRequestGen = (DMAMUX_RequestGen_TypeDef *)((uint32_t)(((uint32_t)DMAMUX1_RequestGenerator0) + ((request - 1U) * 4U))); + + hdma->DMAmuxRequestGenStatus = DMAMUX1_RequestGenStatus; + + /* here "Request" is either DMA_REQUEST_GENERATOR0 to DMA_REQUEST_GENERATOR3, i.e. <= 4*/ + hdma->DMAmuxRequestGenStatusMask = 1UL << ((request - 1U) & 0x3U); +} + +#endif /* DMAMUX1 */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_DMA_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ diff --git a/CablePositioning_IAP_V1.0/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma_ex.c b/CablePositioning_IAP_V1.0/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma_ex.c index 95dce11..260d972 100644 --- a/CablePositioning_IAP_V1.0/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma_ex.c +++ b/CablePositioning_IAP_V1.0/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma_ex.c @@ -1,307 +1,307 @@ -/** - ****************************************************************************** - * @file stm32l4xx_hal_dma_ex.c - * @author MCD Application Team - * @brief DMA Extension HAL module driver - * This file provides firmware functions to manage the following - * functionalities of the DMA Extension peripheral: - * + Extended features functions - * - ****************************************************************************** - * @attention - * - * Copyright (c) 2017 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - @verbatim - ============================================================================== - ##### How to use this driver ##### - ============================================================================== - [..] - The DMA Extension HAL driver can be used as follows: - - (+) Configure the DMA_MUX Synchronization Block using HAL_DMAEx_ConfigMuxSync function. - (+) Configure the DMA_MUX Request Generator Block using HAL_DMAEx_ConfigMuxRequestGenerator function. - Functions HAL_DMAEx_EnableMuxRequestGenerator and HAL_DMAEx_DisableMuxRequestGenerator can then be used - to respectively enable/disable the request generator. - - (+) To handle the DMAMUX Interrupts, the function HAL_DMAEx_MUX_IRQHandler should be called from - the DMAMUX IRQ handler i.e DMAMUX1_OVR_IRQHandler. - As only one interrupt line is available for all DMAMUX channels and request generators , HAL_DMAEx_MUX_IRQHandler should be - called with, as parameter, the appropriate DMA handle as many as used DMAs in the user project - (exception done if a given DMA is not using the DMAMUX SYNC block neither a request generator) - - -@- In Memory-to-Memory transfer mode, Multi (Double) Buffer mode is not allowed. - -@- When Multi (Double) Buffer mode is enabled, the transfer is circular by default. - -@- In Multi (Double) buffer mode, it is possible to update the base address for - the AHB memory port on the fly (DMA_CM0ARx or DMA_CM1ARx) when the channel is enabled. - - - @endverbatim - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32l4xx_hal.h" - -#if defined(DMAMUX1) - -/** @addtogroup STM32L4xx_HAL_Driver - * @{ - */ - -/** @defgroup DMAEx DMAEx - * @brief DMA Extended HAL module driver - * @{ - */ - -#ifdef HAL_DMA_MODULE_ENABLED - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private Constants ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ -/* Private functions ---------------------------------------------------------*/ - - -/** @defgroup DMAEx_Exported_Functions DMAEx Exported Functions - * @{ - */ - -/** @defgroup DMAEx_Exported_Functions_Group1 DMAEx Extended features functions - * @brief Extended features functions - * -@verbatim - =============================================================================== - ##### Extended features functions ##### - =============================================================================== - [..] This section provides functions allowing to: - - (+) Configure the DMAMUX Synchronization Block using HAL_DMAEx_ConfigMuxSync function. - (+) Configure the DMAMUX Request Generator Block using HAL_DMAEx_ConfigMuxRequestGenerator function. - Functions HAL_DMAEx_EnableMuxRequestGenerator and HAL_DMAEx_DisableMuxRequestGenerator can then be used - to respectively enable/disable the request generator. - -@endverbatim - * @{ - */ - - -/** - * @brief Configure the DMAMUX synchronization parameters for a given DMA channel (instance). - * @param hdma pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA channel. - * @param pSyncConfig : pointer to HAL_DMA_MuxSyncConfigTypeDef : contains the DMAMUX synchronization parameters - * @retval HAL status - */ -HAL_StatusTypeDef HAL_DMAEx_ConfigMuxSync(DMA_HandleTypeDef *hdma, HAL_DMA_MuxSyncConfigTypeDef *pSyncConfig) -{ - /* Check the parameters */ - assert_param(IS_DMA_ALL_INSTANCE(hdma->Instance)); - - assert_param(IS_DMAMUX_SYNC_SIGNAL_ID(pSyncConfig->SyncSignalID)); - - assert_param(IS_DMAMUX_SYNC_POLARITY(pSyncConfig-> SyncPolarity)); - assert_param(IS_DMAMUX_SYNC_STATE(pSyncConfig->SyncEnable)); - assert_param(IS_DMAMUX_SYNC_EVENT(pSyncConfig->EventEnable)); - assert_param(IS_DMAMUX_SYNC_REQUEST_NUMBER(pSyncConfig->RequestNumber)); - - /*Check if the DMA state is ready */ - if(hdma->State == HAL_DMA_STATE_READY) - { - /* Process Locked */ - __HAL_LOCK(hdma); - - /* Set the new synchronization parameters (and keep the request ID filled during the Init)*/ - MODIFY_REG( hdma->DMAmuxChannel->CCR, \ - (~DMAMUX_CxCR_DMAREQ_ID) , \ - ((pSyncConfig->SyncSignalID) << DMAMUX_CxCR_SYNC_ID_Pos) | ((pSyncConfig->RequestNumber - 1U) << DMAMUX_CxCR_NBREQ_Pos) | \ - pSyncConfig->SyncPolarity | ((uint32_t)pSyncConfig->SyncEnable << DMAMUX_CxCR_SE_Pos) | \ - ((uint32_t)pSyncConfig->EventEnable << DMAMUX_CxCR_EGE_Pos)); - - /* Process UnLocked */ - __HAL_UNLOCK(hdma); - - return HAL_OK; - } - else - { - /*DMA State not Ready*/ - return HAL_ERROR; - } -} - -/** - * @brief Configure the DMAMUX request generator block used by the given DMA channel (instance). - * @param hdma pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA channel. - * @param pRequestGeneratorConfig : pointer to HAL_DMA_MuxRequestGeneratorConfigTypeDef : - * contains the request generator parameters. - * - * @retval HAL status - */ -HAL_StatusTypeDef HAL_DMAEx_ConfigMuxRequestGenerator (DMA_HandleTypeDef *hdma, HAL_DMA_MuxRequestGeneratorConfigTypeDef *pRequestGeneratorConfig) -{ - /* Check the parameters */ - assert_param(IS_DMA_ALL_INSTANCE(hdma->Instance)); - - assert_param(IS_DMAMUX_REQUEST_GEN_SIGNAL_ID(pRequestGeneratorConfig->SignalID)); - - assert_param(IS_DMAMUX_REQUEST_GEN_POLARITY(pRequestGeneratorConfig->Polarity)); - assert_param(IS_DMAMUX_REQUEST_GEN_REQUEST_NUMBER(pRequestGeneratorConfig->RequestNumber)); - - /* check if the DMA state is ready - and DMA is using a DMAMUX request generator block - */ - if((hdma->State == HAL_DMA_STATE_READY) && (hdma->DMAmuxRequestGen != 0U)) - { - /* Process Locked */ - __HAL_LOCK(hdma); - - /* Set the request generator new parameters */ - hdma->DMAmuxRequestGen->RGCR = pRequestGeneratorConfig->SignalID | \ - ((pRequestGeneratorConfig->RequestNumber - 1U) << DMAMUX_RGxCR_GNBREQ_Pos)| \ - pRequestGeneratorConfig->Polarity; - /* Process UnLocked */ - __HAL_UNLOCK(hdma); - - return HAL_OK; - } - else - { - return HAL_ERROR; - } -} - -/** - * @brief Enable the DMAMUX request generator block used by the given DMA channel (instance). - * @param hdma pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA channel. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_DMAEx_EnableMuxRequestGenerator (DMA_HandleTypeDef *hdma) -{ - /* Check the parameters */ - assert_param(IS_DMA_ALL_INSTANCE(hdma->Instance)); - - /* check if the DMA state is ready - and DMA is using a DMAMUX request generator block - */ - if((hdma->State != HAL_DMA_STATE_RESET) && (hdma->DMAmuxRequestGen != 0)) - { - - /* Enable the request generator*/ - hdma->DMAmuxRequestGen->RGCR |= DMAMUX_RGxCR_GE; - - return HAL_OK; - } - else - { - return HAL_ERROR; - } -} - -/** - * @brief Disable the DMAMUX request generator block used by the given DMA channel (instance). - * @param hdma pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA channel. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_DMAEx_DisableMuxRequestGenerator (DMA_HandleTypeDef *hdma) -{ - /* Check the parameters */ - assert_param(IS_DMA_ALL_INSTANCE(hdma->Instance)); - - /* check if the DMA state is ready - and DMA is using a DMAMUX request generator block - */ - if((hdma->State != HAL_DMA_STATE_RESET) && (hdma->DMAmuxRequestGen != 0)) - { - - /* Disable the request generator*/ - hdma->DMAmuxRequestGen->RGCR &= ~DMAMUX_RGxCR_GE; - - return HAL_OK; - } - else - { - return HAL_ERROR; - } -} - -/** - * @brief Handles DMAMUX interrupt request. - * @param hdma pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA channel. - * @retval None - */ -void HAL_DMAEx_MUX_IRQHandler(DMA_HandleTypeDef *hdma) -{ - /* Check for DMAMUX Synchronization overrun */ - if((hdma->DMAmuxChannelStatus->CSR & hdma->DMAmuxChannelStatusMask) != 0U) - { - /* Disable the synchro overrun interrupt */ - hdma->DMAmuxChannel->CCR &= ~DMAMUX_CxCR_SOIE; - - /* Clear the DMAMUX synchro overrun flag */ - hdma->DMAmuxChannelStatus->CFR = hdma->DMAmuxChannelStatusMask; - - /* Update error code */ - hdma->ErrorCode |= HAL_DMA_ERROR_SYNC; - - if(hdma->XferErrorCallback != NULL) - { - /* Transfer error callback */ - hdma->XferErrorCallback(hdma); - } - } - - if(hdma->DMAmuxRequestGen != 0) - { - /* if using a DMAMUX request generator block Check for DMAMUX request generator overrun */ - if((hdma->DMAmuxRequestGenStatus->RGSR & hdma->DMAmuxRequestGenStatusMask) != 0U) - { - /* Disable the request gen overrun interrupt */ - hdma->DMAmuxRequestGen->RGCR &= ~DMAMUX_RGxCR_OIE; - - /* Clear the DMAMUX request generator overrun flag */ - hdma->DMAmuxRequestGenStatus->RGCFR = hdma->DMAmuxRequestGenStatusMask; - - /* Update error code */ - hdma->ErrorCode |= HAL_DMA_ERROR_REQGEN; - - if(hdma->XferErrorCallback != NULL) - { - /* Transfer error callback */ - hdma->XferErrorCallback(hdma); - } - } - } -} - -/** - * @} - */ - -/** - * @} - */ - -#endif /* HAL_DMA_MODULE_ENABLED */ - -/** - * @} - */ - -/** - * @} - */ - -#endif /* DMAMUX1 */ +/** + ****************************************************************************** + * @file stm32l4xx_hal_dma_ex.c + * @author MCD Application Team + * @brief DMA Extension HAL module driver + * This file provides firmware functions to manage the following + * functionalities of the DMA Extension peripheral: + * + Extended features functions + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + The DMA Extension HAL driver can be used as follows: + + (+) Configure the DMA_MUX Synchronization Block using HAL_DMAEx_ConfigMuxSync function. + (+) Configure the DMA_MUX Request Generator Block using HAL_DMAEx_ConfigMuxRequestGenerator function. + Functions HAL_DMAEx_EnableMuxRequestGenerator and HAL_DMAEx_DisableMuxRequestGenerator can then be used + to respectively enable/disable the request generator. + + (+) To handle the DMAMUX Interrupts, the function HAL_DMAEx_MUX_IRQHandler should be called from + the DMAMUX IRQ handler i.e DMAMUX1_OVR_IRQHandler. + As only one interrupt line is available for all DMAMUX channels and request generators , HAL_DMAEx_MUX_IRQHandler should be + called with, as parameter, the appropriate DMA handle as many as used DMAs in the user project + (exception done if a given DMA is not using the DMAMUX SYNC block neither a request generator) + + -@- In Memory-to-Memory transfer mode, Multi (Double) Buffer mode is not allowed. + -@- When Multi (Double) Buffer mode is enabled, the transfer is circular by default. + -@- In Multi (Double) buffer mode, it is possible to update the base address for + the AHB memory port on the fly (DMA_CM0ARx or DMA_CM1ARx) when the channel is enabled. + + + @endverbatim + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l4xx_hal.h" + +#if defined(DMAMUX1) + +/** @addtogroup STM32L4xx_HAL_Driver + * @{ + */ + +/** @defgroup DMAEx DMAEx + * @brief DMA Extended HAL module driver + * @{ + */ + +#ifdef HAL_DMA_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private Constants ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ + + +/** @defgroup DMAEx_Exported_Functions DMAEx Exported Functions + * @{ + */ + +/** @defgroup DMAEx_Exported_Functions_Group1 DMAEx Extended features functions + * @brief Extended features functions + * +@verbatim + =============================================================================== + ##### Extended features functions ##### + =============================================================================== + [..] This section provides functions allowing to: + + (+) Configure the DMAMUX Synchronization Block using HAL_DMAEx_ConfigMuxSync function. + (+) Configure the DMAMUX Request Generator Block using HAL_DMAEx_ConfigMuxRequestGenerator function. + Functions HAL_DMAEx_EnableMuxRequestGenerator and HAL_DMAEx_DisableMuxRequestGenerator can then be used + to respectively enable/disable the request generator. + +@endverbatim + * @{ + */ + + +/** + * @brief Configure the DMAMUX synchronization parameters for a given DMA channel (instance). + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA channel. + * @param pSyncConfig : pointer to HAL_DMA_MuxSyncConfigTypeDef : contains the DMAMUX synchronization parameters + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMAEx_ConfigMuxSync(DMA_HandleTypeDef *hdma, HAL_DMA_MuxSyncConfigTypeDef *pSyncConfig) +{ + /* Check the parameters */ + assert_param(IS_DMA_ALL_INSTANCE(hdma->Instance)); + + assert_param(IS_DMAMUX_SYNC_SIGNAL_ID(pSyncConfig->SyncSignalID)); + + assert_param(IS_DMAMUX_SYNC_POLARITY(pSyncConfig-> SyncPolarity)); + assert_param(IS_DMAMUX_SYNC_STATE(pSyncConfig->SyncEnable)); + assert_param(IS_DMAMUX_SYNC_EVENT(pSyncConfig->EventEnable)); + assert_param(IS_DMAMUX_SYNC_REQUEST_NUMBER(pSyncConfig->RequestNumber)); + + /*Check if the DMA state is ready */ + if (hdma->State == HAL_DMA_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hdma); + + /* Set the new synchronization parameters (and keep the request ID filled during the Init)*/ + MODIFY_REG(hdma->DMAmuxChannel->CCR, \ + (~DMAMUX_CxCR_DMAREQ_ID), \ + ((pSyncConfig->SyncSignalID) << DMAMUX_CxCR_SYNC_ID_Pos) | ((pSyncConfig->RequestNumber - 1U) << DMAMUX_CxCR_NBREQ_Pos) | \ + pSyncConfig->SyncPolarity | ((uint32_t)pSyncConfig->SyncEnable << DMAMUX_CxCR_SE_Pos) | \ + ((uint32_t)pSyncConfig->EventEnable << DMAMUX_CxCR_EGE_Pos)); + + /* Process UnLocked */ + __HAL_UNLOCK(hdma); + + return HAL_OK; + } + else + { + /*DMA State not Ready*/ + return HAL_ERROR; + } +} + +/** + * @brief Configure the DMAMUX request generator block used by the given DMA channel (instance). + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA channel. + * @param pRequestGeneratorConfig : pointer to HAL_DMA_MuxRequestGeneratorConfigTypeDef : + * contains the request generator parameters. + * + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMAEx_ConfigMuxRequestGenerator(DMA_HandleTypeDef *hdma, HAL_DMA_MuxRequestGeneratorConfigTypeDef *pRequestGeneratorConfig) +{ + /* Check the parameters */ + assert_param(IS_DMA_ALL_INSTANCE(hdma->Instance)); + + assert_param(IS_DMAMUX_REQUEST_GEN_SIGNAL_ID(pRequestGeneratorConfig->SignalID)); + + assert_param(IS_DMAMUX_REQUEST_GEN_POLARITY(pRequestGeneratorConfig->Polarity)); + assert_param(IS_DMAMUX_REQUEST_GEN_REQUEST_NUMBER(pRequestGeneratorConfig->RequestNumber)); + + /* check if the DMA state is ready + and DMA is using a DMAMUX request generator block + */ + if ((hdma->State == HAL_DMA_STATE_READY) && (hdma->DMAmuxRequestGen != 0U)) + { + /* Process Locked */ + __HAL_LOCK(hdma); + + /* Set the request generator new parameters */ + hdma->DMAmuxRequestGen->RGCR = pRequestGeneratorConfig->SignalID | \ + ((pRequestGeneratorConfig->RequestNumber - 1U) << DMAMUX_RGxCR_GNBREQ_Pos) | \ + pRequestGeneratorConfig->Polarity; + /* Process UnLocked */ + __HAL_UNLOCK(hdma); + + return HAL_OK; + } + else + { + return HAL_ERROR; + } +} + +/** + * @brief Enable the DMAMUX request generator block used by the given DMA channel (instance). + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA channel. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMAEx_EnableMuxRequestGenerator(DMA_HandleTypeDef *hdma) +{ + /* Check the parameters */ + assert_param(IS_DMA_ALL_INSTANCE(hdma->Instance)); + + /* check if the DMA state is ready + and DMA is using a DMAMUX request generator block + */ + if ((hdma->State != HAL_DMA_STATE_RESET) && (hdma->DMAmuxRequestGen != 0)) + { + + /* Enable the request generator*/ + hdma->DMAmuxRequestGen->RGCR |= DMAMUX_RGxCR_GE; + + return HAL_OK; + } + else + { + return HAL_ERROR; + } +} + +/** + * @brief Disable the DMAMUX request generator block used by the given DMA channel (instance). + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA channel. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMAEx_DisableMuxRequestGenerator(DMA_HandleTypeDef *hdma) +{ + /* Check the parameters */ + assert_param(IS_DMA_ALL_INSTANCE(hdma->Instance)); + + /* check if the DMA state is ready + and DMA is using a DMAMUX request generator block + */ + if ((hdma->State != HAL_DMA_STATE_RESET) && (hdma->DMAmuxRequestGen != 0)) + { + + /* Disable the request generator*/ + hdma->DMAmuxRequestGen->RGCR &= ~DMAMUX_RGxCR_GE; + + return HAL_OK; + } + else + { + return HAL_ERROR; + } +} + +/** + * @brief Handles DMAMUX interrupt request. + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA channel. + * @retval None + */ +void HAL_DMAEx_MUX_IRQHandler(DMA_HandleTypeDef *hdma) +{ + /* Check for DMAMUX Synchronization overrun */ + if ((hdma->DMAmuxChannelStatus->CSR & hdma->DMAmuxChannelStatusMask) != 0U) + { + /* Disable the synchro overrun interrupt */ + hdma->DMAmuxChannel->CCR &= ~DMAMUX_CxCR_SOIE; + + /* Clear the DMAMUX synchro overrun flag */ + hdma->DMAmuxChannelStatus->CFR = hdma->DMAmuxChannelStatusMask; + + /* Update error code */ + hdma->ErrorCode |= HAL_DMA_ERROR_SYNC; + + if (hdma->XferErrorCallback != NULL) + { + /* Transfer error callback */ + hdma->XferErrorCallback(hdma); + } + } + + if (hdma->DMAmuxRequestGen != 0) + { + /* if using a DMAMUX request generator block Check for DMAMUX request generator overrun */ + if ((hdma->DMAmuxRequestGenStatus->RGSR & hdma->DMAmuxRequestGenStatusMask) != 0U) + { + /* Disable the request gen overrun interrupt */ + hdma->DMAmuxRequestGen->RGCR &= ~DMAMUX_RGxCR_OIE; + + /* Clear the DMAMUX request generator overrun flag */ + hdma->DMAmuxRequestGenStatus->RGCFR = hdma->DMAmuxRequestGenStatusMask; + + /* Update error code */ + hdma->ErrorCode |= HAL_DMA_ERROR_REQGEN; + + if (hdma->XferErrorCallback != NULL) + { + /* Transfer error callback */ + hdma->XferErrorCallback(hdma); + } + } + } +} + +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_DMA_MODULE_ENABLED */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* DMAMUX1 */ diff --git a/CablePositioning_IAP_V1.0/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_exti.c b/CablePositioning_IAP_V1.0/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_exti.c index fb1afae..a546ca1 100644 --- a/CablePositioning_IAP_V1.0/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_exti.c +++ b/CablePositioning_IAP_V1.0/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_exti.c @@ -1,632 +1,638 @@ -/** - ****************************************************************************** - * @file stm32l4xx_hal_exti.c - * @author MCD Application Team - * @brief EXTI HAL module driver. - * This file provides firmware functions to manage the following - * functionalities of the Extended Interrupts and events controller (EXTI) peripheral: - * + Initialization and de-initialization functions - * + IO operation functions - * - ****************************************************************************** - * @attention - * - * Copyright (c) 2018 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - @verbatim - ============================================================================== - ##### EXTI Peripheral features ##### - ============================================================================== - [..] - (+) Each Exti line can be configured within this driver. - - (+) Exti line can be configured in 3 different modes - (++) Interrupt - (++) Event - (++) Both of them - - (+) Configurable Exti lines can be configured with 3 different triggers - (++) Rising - (++) Falling - (++) Both of them - - (+) When set in interrupt mode, configurable Exti lines have two different - interrupts pending registers which allow to distinguish which transition - occurs: - (++) Rising edge pending interrupt - (++) Falling - - (+) Exti lines 0 to 15 are linked to gpio pin number 0 to 15. Gpio port can - be selected through multiplexer. - - ##### How to use this driver ##### - ============================================================================== - [..] - - (#) Configure the EXTI line using HAL_EXTI_SetConfigLine(). - (++) Choose the interrupt line number by setting "Line" member from - EXTI_ConfigTypeDef structure. - (++) Configure the interrupt and/or event mode using "Mode" member from - EXTI_ConfigTypeDef structure. - (++) For configurable lines, configure rising and/or falling trigger - "Trigger" member from EXTI_ConfigTypeDef structure. - (++) For Exti lines linked to gpio, choose gpio port using "GPIOSel" - member from GPIO_InitTypeDef structure. - - (#) Get current Exti configuration of a dedicated line using - HAL_EXTI_GetConfigLine(). - (++) Provide exiting handle as parameter. - (++) Provide pointer on EXTI_ConfigTypeDef structure as second parameter. - - (#) Clear Exti configuration of a dedicated line using HAL_EXTI_GetConfigLine(). - (++) Provide exiting handle as parameter. - - (#) Register callback to treat Exti interrupts using HAL_EXTI_RegisterCallback(). - (++) Provide exiting handle as first parameter. - (++) Provide which callback will be registered using one value from - EXTI_CallbackIDTypeDef. - (++) Provide callback function pointer. - - (#) Get interrupt pending bit using HAL_EXTI_GetPending(). - - (#) Clear interrupt pending bit using HAL_EXTI_GetPending(). - - (#) Generate software interrupt using HAL_EXTI_GenerateSWI(). - - @endverbatim - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32l4xx_hal.h" - -/** @addtogroup STM32L4xx_HAL_Driver - * @{ - */ - -/** @addtogroup EXTI - * @{ - */ -/** MISRA C:2012 deviation rule has been granted for following rule: - * Rule-18.1_b - Medium: Array `EXTICR' 1st subscript interval [0,7] may be out - * of bounds [0,3] in following API : - * HAL_EXTI_SetConfigLine - * HAL_EXTI_GetConfigLine - * HAL_EXTI_ClearConfigLine - */ - -#ifdef HAL_EXTI_MODULE_ENABLED - -/* Private typedef -----------------------------------------------------------*/ -/* Private defines ------------------------------------------------------------*/ -/** @defgroup EXTI_Private_Constants EXTI Private Constants - * @{ - */ -#define EXTI_MODE_OFFSET 0x08u /* 0x20: offset between MCU IMR/EMR registers */ -#define EXTI_CONFIG_OFFSET 0x08u /* 0x20: offset between MCU Rising/Falling configuration registers */ -/** - * @} - */ - -/* Private macros ------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ -/* Exported functions --------------------------------------------------------*/ - -/** @addtogroup EXTI_Exported_Functions - * @{ - */ - -/** @addtogroup EXTI_Exported_Functions_Group1 - * @brief Configuration functions - * -@verbatim - =============================================================================== - ##### Configuration functions ##### - =============================================================================== - -@endverbatim - * @{ - */ - -/** - * @brief Set configuration of a dedicated Exti line. - * @param hexti Exti handle. - * @param pExtiConfig Pointer on EXTI configuration to be set. - * @retval HAL Status. - */ -HAL_StatusTypeDef HAL_EXTI_SetConfigLine(EXTI_HandleTypeDef *hexti, EXTI_ConfigTypeDef *pExtiConfig) -{ - __IO uint32_t *regaddr; - uint32_t regval; - uint32_t linepos; - uint32_t maskline; - uint32_t offset; - - /* Check null pointer */ - if ((hexti == NULL) || (pExtiConfig == NULL)) - { - return HAL_ERROR; - } - - /* Check parameters */ - assert_param(IS_EXTI_LINE(pExtiConfig->Line)); - assert_param(IS_EXTI_MODE(pExtiConfig->Mode)); - - /* Assign line number to handle */ - hexti->Line = pExtiConfig->Line; - - /* Compute line register offset and line mask */ - offset = ((pExtiConfig->Line & EXTI_REG_MASK) >> EXTI_REG_SHIFT); - linepos = (pExtiConfig->Line & EXTI_PIN_MASK); - maskline = (1uL << linepos); - - /* Configure triggers for configurable lines */ - if ((pExtiConfig->Line & EXTI_CONFIG) != 0x00u) - { - assert_param(IS_EXTI_TRIGGER(pExtiConfig->Trigger)); - - /* Configure rising trigger */ - regaddr = (&EXTI->RTSR1 + (EXTI_CONFIG_OFFSET * offset)); - regval = *regaddr; - - /* Mask or set line */ - if ((pExtiConfig->Trigger & EXTI_TRIGGER_RISING) != 0x00u) - { - regval |= maskline; - } - else - { - regval &= ~maskline; - } - - /* Store rising trigger mode */ - *regaddr = regval; - - /* Configure falling trigger */ - regaddr = (&EXTI->FTSR1 + (EXTI_CONFIG_OFFSET * offset)); - regval = *regaddr; - - /* Mask or set line */ - if ((pExtiConfig->Trigger & EXTI_TRIGGER_FALLING) != 0x00u) - { - regval |= maskline; - } - else - { - regval &= ~maskline; - } - - /* Store falling trigger mode */ - *regaddr = regval; - - /* Configure gpio port selection in case of gpio exti line */ - if ((pExtiConfig->Line & EXTI_GPIO) == EXTI_GPIO) - { - assert_param(IS_EXTI_GPIO_PORT(pExtiConfig->GPIOSel)); - assert_param(IS_EXTI_GPIO_PIN(linepos)); - - regval = SYSCFG->EXTICR[linepos >> 2u]; - regval &= ~(SYSCFG_EXTICR1_EXTI0 << (SYSCFG_EXTICR1_EXTI1_Pos * (linepos & 0x03u))); - regval |= (pExtiConfig->GPIOSel << (SYSCFG_EXTICR1_EXTI1_Pos * (linepos & 0x03u))); - SYSCFG->EXTICR[linepos >> 2u] = regval; - } - } - - /* Configure interrupt mode : read current mode */ - regaddr = (&EXTI->IMR1 + (EXTI_MODE_OFFSET * offset)); - regval = *regaddr; - - /* Mask or set line */ - if ((pExtiConfig->Mode & EXTI_MODE_INTERRUPT) != 0x00u) - { - regval |= maskline; - } - else - { - regval &= ~maskline; - } - - /* Store interrupt mode */ - *regaddr = regval; - - /* The event mode cannot be configured if the line does not support it */ - assert_param(((pExtiConfig->Line & EXTI_EVENT) == EXTI_EVENT) || ((pExtiConfig->Mode & EXTI_MODE_EVENT) != EXTI_MODE_EVENT)); - - /* Configure event mode : read current mode */ - regaddr = (&EXTI->EMR1 + (EXTI_MODE_OFFSET * offset)); - regval = *regaddr; - - /* Mask or set line */ - if ((pExtiConfig->Mode & EXTI_MODE_EVENT) != 0x00u) - { - regval |= maskline; - } - else - { - regval &= ~maskline; - } - - /* Store event mode */ - *regaddr = regval; - - return HAL_OK; -} - - -/** - * @brief Get configuration of a dedicated Exti line. - * @param hexti Exti handle. - * @param pExtiConfig Pointer on structure to store Exti configuration. - * @retval HAL Status. - */ -HAL_StatusTypeDef HAL_EXTI_GetConfigLine(EXTI_HandleTypeDef *hexti, EXTI_ConfigTypeDef *pExtiConfig) -{ - __IO uint32_t *regaddr; - uint32_t regval; - uint32_t linepos; - uint32_t maskline; - uint32_t offset; - - /* Check null pointer */ - if ((hexti == NULL) || (pExtiConfig == NULL)) - { - return HAL_ERROR; - } - - /* Check the parameter */ - assert_param(IS_EXTI_LINE(hexti->Line)); - - /* Store handle line number to configuration structure */ - pExtiConfig->Line = hexti->Line; - - /* Compute line register offset and line mask */ - offset = ((pExtiConfig->Line & EXTI_REG_MASK) >> EXTI_REG_SHIFT); - linepos = (pExtiConfig->Line & EXTI_PIN_MASK); - maskline = (1uL << linepos); - - /* 1] Get core mode : interrupt */ - regaddr = (&EXTI->IMR1 + (EXTI_MODE_OFFSET * offset)); - regval = *regaddr; - - /* Check if selected line is enable */ - if ((regval & maskline) != 0x00u) - { - pExtiConfig->Mode = EXTI_MODE_INTERRUPT; - } - else - { - pExtiConfig->Mode = EXTI_MODE_NONE; - } - - /* Get event mode */ - regaddr = (&EXTI->EMR1 + (EXTI_MODE_OFFSET * offset)); - regval = *regaddr; - - /* Check if selected line is enable */ - if ((regval & maskline) != 0x00u) - { - pExtiConfig->Mode |= EXTI_MODE_EVENT; - } - - /* Get default Trigger and GPIOSel configuration */ - pExtiConfig->Trigger = EXTI_TRIGGER_NONE; - pExtiConfig->GPIOSel = 0x00u; - - /* 2] Get trigger for configurable lines : rising */ - if ((pExtiConfig->Line & EXTI_CONFIG) != 0x00u) - { - regaddr = (&EXTI->RTSR1 + (EXTI_CONFIG_OFFSET * offset)); - regval = *regaddr; - - /* Check if configuration of selected line is enable */ - if ((regval & maskline) != 0x00u) - { - pExtiConfig->Trigger = EXTI_TRIGGER_RISING; - } - - /* Get falling configuration */ - regaddr = (&EXTI->FTSR1 + (EXTI_CONFIG_OFFSET * offset)); - regval = *regaddr; - - /* Check if configuration of selected line is enable */ - if ((regval & maskline) != 0x00u) - { - pExtiConfig->Trigger |= EXTI_TRIGGER_FALLING; - } - - /* Get Gpio port selection for gpio lines */ - if ((pExtiConfig->Line & EXTI_GPIO) == EXTI_GPIO) - { - assert_param(IS_EXTI_GPIO_PIN(linepos)); - - regval = SYSCFG->EXTICR[linepos >> 2u]; - pExtiConfig->GPIOSel = ((regval << (SYSCFG_EXTICR1_EXTI1_Pos * (3uL - (linepos & 0x03u)))) >> 24); - } - } - - return HAL_OK; -} - - -/** - * @brief Clear whole configuration of a dedicated Exti line. - * @param hexti Exti handle. - * @retval HAL Status. - */ -HAL_StatusTypeDef HAL_EXTI_ClearConfigLine(EXTI_HandleTypeDef *hexti) -{ - __IO uint32_t *regaddr; - uint32_t regval; - uint32_t linepos; - uint32_t maskline; - uint32_t offset; - - /* Check null pointer */ - if (hexti == NULL) - { - return HAL_ERROR; - } - - /* Check the parameter */ - assert_param(IS_EXTI_LINE(hexti->Line)); - - /* compute line register offset and line mask */ - offset = ((hexti->Line & EXTI_REG_MASK) >> EXTI_REG_SHIFT); - linepos = (hexti->Line & EXTI_PIN_MASK); - maskline = (1uL << linepos); - - /* 1] Clear interrupt mode */ - regaddr = (&EXTI->IMR1 + (EXTI_MODE_OFFSET * offset)); - regval = (*regaddr & ~maskline); - *regaddr = regval; - - /* 2] Clear event mode */ - regaddr = (&EXTI->EMR1 + (EXTI_MODE_OFFSET * offset)); - regval = (*regaddr & ~maskline); - *regaddr = regval; - - /* 3] Clear triggers in case of configurable lines */ - if ((hexti->Line & EXTI_CONFIG) != 0x00u) - { - regaddr = (&EXTI->RTSR1 + (EXTI_CONFIG_OFFSET * offset)); - regval = (*regaddr & ~maskline); - *regaddr = regval; - - regaddr = (&EXTI->FTSR1 + (EXTI_CONFIG_OFFSET * offset)); - regval = (*regaddr & ~maskline); - *regaddr = regval; - - /* Get Gpio port selection for gpio lines */ - if ((hexti->Line & EXTI_GPIO) == EXTI_GPIO) - { - assert_param(IS_EXTI_GPIO_PIN(linepos)); - - regval = SYSCFG->EXTICR[linepos >> 2u]; - regval &= ~(SYSCFG_EXTICR1_EXTI0 << (SYSCFG_EXTICR1_EXTI1_Pos * (linepos & 0x03u))); - SYSCFG->EXTICR[linepos >> 2u] = regval; - } - } - - return HAL_OK; -} - - -/** - * @brief Register callback for a dedicated Exti line. - * @param hexti Exti handle. - * @param CallbackID User callback identifier. - * This parameter can be one of @arg @ref EXTI_CallbackIDTypeDef values. - * @param pPendingCbfn function pointer to be stored as callback. - * @retval HAL Status. - */ -HAL_StatusTypeDef HAL_EXTI_RegisterCallback(EXTI_HandleTypeDef *hexti, EXTI_CallbackIDTypeDef CallbackID, void (*pPendingCbfn)(void)) -{ - HAL_StatusTypeDef status = HAL_OK; - - switch (CallbackID) - { - case HAL_EXTI_COMMON_CB_ID: - hexti->PendingCallback = pPendingCbfn; - break; - - default: - status = HAL_ERROR; - break; - } - - return status; -} - - -/** - * @brief Store line number as handle private field. - * @param hexti Exti handle. - * @param ExtiLine Exti line number. - * This parameter can be from 0 to @ref EXTI_LINE_NB. - * @retval HAL Status. - */ -HAL_StatusTypeDef HAL_EXTI_GetHandle(EXTI_HandleTypeDef *hexti, uint32_t ExtiLine) -{ - /* Check the parameters */ - assert_param(IS_EXTI_LINE(ExtiLine)); - - /* Check null pointer */ - if (hexti == NULL) - { - return HAL_ERROR; - } - else - { - /* Store line number as handle private field */ - hexti->Line = ExtiLine; - - return HAL_OK; - } -} - - -/** - * @} - */ - -/** @addtogroup EXTI_Exported_Functions_Group2 - * @brief EXTI IO functions. - * -@verbatim - =============================================================================== - ##### IO operation functions ##### - =============================================================================== - -@endverbatim - * @{ - */ - -/** - * @brief Handle EXTI interrupt request. - * @param hexti Exti handle. - * @retval none. - */ -void HAL_EXTI_IRQHandler(EXTI_HandleTypeDef *hexti) -{ - __IO uint32_t *regaddr; - uint32_t regval; - uint32_t maskline; - uint32_t offset; - - /* Compute line register offset and line mask */ - offset = ((hexti->Line & EXTI_REG_MASK) >> EXTI_REG_SHIFT); - maskline = (1uL << (hexti->Line & EXTI_PIN_MASK)); - - /* Get pending bit */ - regaddr = (&EXTI->PR1 + (EXTI_CONFIG_OFFSET * offset)); - regval = (*regaddr & maskline); - - if (regval != 0x00u) - { - /* Clear pending bit */ - *regaddr = maskline; - - /* Call callback */ - if (hexti->PendingCallback != NULL) - { - hexti->PendingCallback(); - } - } -} - - -/** - * @brief Get interrupt pending bit of a dedicated line. - * @param hexti Exti handle. - * @param Edge Specify which pending edge as to be checked. - * This parameter can be one of the following values: - * @arg @ref EXTI_TRIGGER_RISING_FALLING - * This parameter is kept for compatibility with other series. - * @retval 1 if interrupt is pending else 0. - */ -uint32_t HAL_EXTI_GetPending(EXTI_HandleTypeDef *hexti, uint32_t Edge) -{ - __IO uint32_t *regaddr; - uint32_t regval; - uint32_t linepos; - uint32_t maskline; - uint32_t offset; - - /* Check parameters */ - assert_param(IS_EXTI_LINE(hexti->Line)); - assert_param(IS_EXTI_CONFIG_LINE(hexti->Line)); - assert_param(IS_EXTI_PENDING_EDGE(Edge)); - - /* Compute line register offset and line mask */ - offset = ((hexti->Line & EXTI_REG_MASK) >> EXTI_REG_SHIFT); - linepos = (hexti->Line & EXTI_PIN_MASK); - maskline = (1uL << linepos); - - /* Get pending bit */ - regaddr = (&EXTI->PR1 + (EXTI_CONFIG_OFFSET * offset)); - - /* return 1 if bit is set else 0 */ - regval = ((*regaddr & maskline) >> linepos); - return regval; -} - - -/** - * @brief Clear interrupt pending bit of a dedicated line. - * @param hexti Exti handle. - * @param Edge Specify which pending edge as to be clear. - * This parameter can be one of the following values: - * @arg @ref EXTI_TRIGGER_RISING_FALLING - * This parameter is kept for compatibility with other series. - * @retval None. - */ -void HAL_EXTI_ClearPending(EXTI_HandleTypeDef *hexti, uint32_t Edge) -{ - __IO uint32_t *regaddr; - uint32_t maskline; - uint32_t offset; - - /* Check parameters */ - assert_param(IS_EXTI_LINE(hexti->Line)); - assert_param(IS_EXTI_CONFIG_LINE(hexti->Line)); - assert_param(IS_EXTI_PENDING_EDGE(Edge)); - - /* compute line register offset and line mask */ - offset = ((hexti->Line & EXTI_REG_MASK) >> EXTI_REG_SHIFT); - maskline = (1uL << (hexti->Line & EXTI_PIN_MASK)); - - /* Get pending register address */ - regaddr = (&EXTI->PR1 + (EXTI_CONFIG_OFFSET * offset)); - - /* Clear Pending bit */ - *regaddr = maskline; -} - - -/** - * @brief Generate a software interrupt for a dedicated line. - * @param hexti Exti handle. - * @retval None. - */ -void HAL_EXTI_GenerateSWI(EXTI_HandleTypeDef *hexti) -{ - __IO uint32_t *regaddr; - uint32_t maskline; - uint32_t offset; - - /* Check parameters */ - assert_param(IS_EXTI_LINE(hexti->Line)); - assert_param(IS_EXTI_CONFIG_LINE(hexti->Line)); - - /* compute line register offset and line mask */ - offset = ((hexti->Line & EXTI_REG_MASK) >> EXTI_REG_SHIFT); - maskline = (1uL << (hexti->Line & EXTI_PIN_MASK)); - - regaddr = (&EXTI->SWIER1 + (EXTI_CONFIG_OFFSET * offset)); - *regaddr = maskline; -} - - -/** - * @} - */ - -/** - * @} - */ - -#endif /* HAL_EXTI_MODULE_ENABLED */ -/** - * @} - */ - -/** - * @} - */ - +/** + ****************************************************************************** + * @file stm32l4xx_hal_exti.c + * @author MCD Application Team + * @brief EXTI HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Extended Interrupts and events controller (EXTI) peripheral: + * + Initialization and de-initialization functions + * + IO operation functions + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2018 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### EXTI Peripheral features ##### + ============================================================================== + [..] + (+) Each Exti line can be configured within this driver. + + (+) Exti line can be configured in 3 different modes + (++) Interrupt + (++) Event + (++) Both of them + + (+) Configurable Exti lines can be configured with 3 different triggers + (++) Rising + (++) Falling + (++) Both of them + + (+) When set in interrupt mode, configurable Exti lines have two different + interrupts pending registers which allow to distinguish which transition + occurs: + (++) Rising edge pending interrupt + (++) Falling + + (+) Exti lines 0 to 15 are linked to gpio pin number 0 to 15. Gpio port can + be selected through multiplexer. + + ##### How to use this driver ##### + ============================================================================== + [..] + + (#) Configure the EXTI line using HAL_EXTI_SetConfigLine(). + (++) Choose the interrupt line number by setting "Line" member from + EXTI_ConfigTypeDef structure. + (++) Configure the interrupt and/or event mode using "Mode" member from + EXTI_ConfigTypeDef structure. + (++) For configurable lines, configure rising and/or falling trigger + "Trigger" member from EXTI_ConfigTypeDef structure. + (++) For Exti lines linked to gpio, choose gpio port using "GPIOSel" + member from GPIO_InitTypeDef structure. + + (#) Get current Exti configuration of a dedicated line using + HAL_EXTI_GetConfigLine(). + (++) Provide exiting handle as parameter. + (++) Provide pointer on EXTI_ConfigTypeDef structure as second parameter. + + (#) Clear Exti configuration of a dedicated line using HAL_EXTI_ClearConfigLine(). + (++) Provide exiting handle as parameter. + + (#) Register callback to treat Exti interrupts using HAL_EXTI_RegisterCallback(). + (++) Provide exiting handle as first parameter. + (++) Provide which callback will be registered using one value from + EXTI_CallbackIDTypeDef. + (++) Provide callback function pointer. + + (#) Get interrupt pending bit using HAL_EXTI_GetPending(). + + (#) Clear interrupt pending bit using HAL_EXTI_ClearPending(). + + (#) Generate software interrupt using HAL_EXTI_GenerateSWI(). + + @endverbatim + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l4xx_hal.h" + +/** @addtogroup STM32L4xx_HAL_Driver + * @{ + */ + +/** @addtogroup EXTI + * @{ + */ +/** MISRA C:2012 deviation rule has been granted for following rule: + * Rule-18.1_b - Medium: Array `EXTICR' 1st subscript interval [0,7] may be out + * of bounds [0,3] in following API : + * HAL_EXTI_SetConfigLine + * HAL_EXTI_GetConfigLine + * HAL_EXTI_ClearConfigLine + */ + +#ifdef HAL_EXTI_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private defines ------------------------------------------------------------*/ +/** @defgroup EXTI_Private_Constants EXTI Private Constants + * @{ + */ +#define EXTI_MODE_OFFSET 0x08u /* 0x20: offset between MCU IMR/EMR registers */ +#define EXTI_CONFIG_OFFSET 0x08u /* 0x20: offset between MCU Rising/Falling configuration registers */ +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ + +/** @addtogroup EXTI_Exported_Functions + * @{ + */ + +/** @addtogroup EXTI_Exported_Functions_Group1 + * @brief Configuration functions + * +@verbatim + =============================================================================== + ##### Configuration functions ##### + =============================================================================== + +@endverbatim + * @{ + */ + +/** + * @brief Set configuration of a dedicated Exti line. + * @param hexti Exti handle. + * @param pExtiConfig Pointer on EXTI configuration to be set. + * @retval HAL Status. + */ +HAL_StatusTypeDef HAL_EXTI_SetConfigLine(EXTI_HandleTypeDef *hexti, EXTI_ConfigTypeDef *pExtiConfig) +{ + __IO uint32_t *regaddr; + uint32_t regval; + uint32_t linepos; + uint32_t maskline; + uint32_t offset; + + /* Check null pointer */ + if ((hexti == NULL) || (pExtiConfig == NULL)) + { + return HAL_ERROR; + } + + /* Check parameters */ + assert_param(IS_EXTI_LINE(pExtiConfig->Line)); + assert_param(IS_EXTI_MODE(pExtiConfig->Mode)); + + /* Assign line number to handle */ + hexti->Line = pExtiConfig->Line; + + /* Compute line register offset and line mask */ + offset = ((pExtiConfig->Line & EXTI_REG_MASK) >> EXTI_REG_SHIFT); + linepos = (pExtiConfig->Line & EXTI_PIN_MASK); + maskline = (1uL << linepos); + + /* Configure triggers for configurable lines */ + if ((pExtiConfig->Line & EXTI_CONFIG) != 0x00u) + { + assert_param(IS_EXTI_TRIGGER(pExtiConfig->Trigger)); + + /* Configure rising trigger */ + regaddr = (&EXTI->RTSR1 + (EXTI_CONFIG_OFFSET * offset)); + regval = *regaddr; + + /* Mask or set line */ + if ((pExtiConfig->Trigger & EXTI_TRIGGER_RISING) != 0x00u) + { + regval |= maskline; + } + else + { + regval &= ~maskline; + } + + /* Store rising trigger mode */ + *regaddr = regval; + + /* Configure falling trigger */ + regaddr = (&EXTI->FTSR1 + (EXTI_CONFIG_OFFSET * offset)); + regval = *regaddr; + + /* Mask or set line */ + if ((pExtiConfig->Trigger & EXTI_TRIGGER_FALLING) != 0x00u) + { + regval |= maskline; + } + else + { + regval &= ~maskline; + } + + /* Store falling trigger mode */ + *regaddr = regval; + + /* Configure gpio port selection in case of gpio exti line */ + if ((pExtiConfig->Line & EXTI_GPIO) == EXTI_GPIO) + { + assert_param(IS_EXTI_GPIO_PORT(pExtiConfig->GPIOSel)); + assert_param(IS_EXTI_GPIO_PIN(linepos)); + + regval = SYSCFG->EXTICR[linepos >> 2u]; + regval &= ~(SYSCFG_EXTICR1_EXTI0 << (SYSCFG_EXTICR1_EXTI1_Pos * (linepos & 0x03u))); + regval |= (pExtiConfig->GPIOSel << (SYSCFG_EXTICR1_EXTI1_Pos * (linepos & 0x03u))); + SYSCFG->EXTICR[linepos >> 2u] = regval; + } + } + + /* Configure interrupt mode : read current mode */ + regaddr = (&EXTI->IMR1 + (EXTI_MODE_OFFSET * offset)); + regval = *regaddr; + + /* Mask or set line */ + if ((pExtiConfig->Mode & EXTI_MODE_INTERRUPT) != 0x00u) + { + regval |= maskline; + } + else + { + regval &= ~maskline; + } + + /* Store interrupt mode */ + *regaddr = regval; + + /* The event mode cannot be configured if the line does not support it */ + assert_param(((pExtiConfig->Line & EXTI_EVENT) == EXTI_EVENT) || ((pExtiConfig->Mode & EXTI_MODE_EVENT) != EXTI_MODE_EVENT)); + + /* Configure event mode : read current mode */ + regaddr = (&EXTI->EMR1 + (EXTI_MODE_OFFSET * offset)); + regval = *regaddr; + + /* Mask or set line */ + if ((pExtiConfig->Mode & EXTI_MODE_EVENT) != 0x00u) + { + regval |= maskline; + } + else + { + regval &= ~maskline; + } + + /* Store event mode */ + *regaddr = regval; + + return HAL_OK; +} + + +/** + * @brief Get configuration of a dedicated Exti line. + * @param hexti Exti handle. + * @param pExtiConfig Pointer on structure to store Exti configuration. + * @retval HAL Status. + */ +HAL_StatusTypeDef HAL_EXTI_GetConfigLine(EXTI_HandleTypeDef *hexti, EXTI_ConfigTypeDef *pExtiConfig) +{ + __IO uint32_t *regaddr; + uint32_t regval; + uint32_t linepos; + uint32_t maskline; + uint32_t offset; + + /* Check null pointer */ + if ((hexti == NULL) || (pExtiConfig == NULL)) + { + return HAL_ERROR; + } + + /* Check the parameter */ + assert_param(IS_EXTI_LINE(hexti->Line)); + + /* Store handle line number to configuration structure */ + pExtiConfig->Line = hexti->Line; + + /* Compute line register offset and line mask */ + offset = ((pExtiConfig->Line & EXTI_REG_MASK) >> EXTI_REG_SHIFT); + linepos = (pExtiConfig->Line & EXTI_PIN_MASK); + maskline = (1uL << linepos); + + /* 1] Get core mode : interrupt */ + regaddr = (&EXTI->IMR1 + (EXTI_MODE_OFFSET * offset)); + regval = *regaddr; + + /* Check if selected line is enable */ + if ((regval & maskline) != 0x00u) + { + pExtiConfig->Mode = EXTI_MODE_INTERRUPT; + } + else + { + pExtiConfig->Mode = EXTI_MODE_NONE; + } + + /* Get event mode */ + regaddr = (&EXTI->EMR1 + (EXTI_MODE_OFFSET * offset)); + regval = *regaddr; + + /* Check if selected line is enable */ + if ((regval & maskline) != 0x00u) + { + pExtiConfig->Mode |= EXTI_MODE_EVENT; + } + + /* Get default Trigger and GPIOSel configuration */ + pExtiConfig->Trigger = EXTI_TRIGGER_NONE; + pExtiConfig->GPIOSel = 0x00u; + + /* 2] Get trigger for configurable lines : rising */ + if ((pExtiConfig->Line & EXTI_CONFIG) != 0x00u) + { + regaddr = (&EXTI->RTSR1 + (EXTI_CONFIG_OFFSET * offset)); + regval = *regaddr; + + /* Check if configuration of selected line is enable */ + if ((regval & maskline) != 0x00u) + { + pExtiConfig->Trigger = EXTI_TRIGGER_RISING; + } + + /* Get falling configuration */ + regaddr = (&EXTI->FTSR1 + (EXTI_CONFIG_OFFSET * offset)); + regval = *regaddr; + + /* Check if configuration of selected line is enable */ + if ((regval & maskline) != 0x00u) + { + pExtiConfig->Trigger |= EXTI_TRIGGER_FALLING; + } + + /* Get Gpio port selection for gpio lines */ + if ((pExtiConfig->Line & EXTI_GPIO) == EXTI_GPIO) + { + assert_param(IS_EXTI_GPIO_PIN(linepos)); + + regval = SYSCFG->EXTICR[linepos >> 2u]; + pExtiConfig->GPIOSel = (regval >> (SYSCFG_EXTICR1_EXTI1_Pos * (linepos & 0x03u))) & SYSCFG_EXTICR1_EXTI0; + } + } + + return HAL_OK; +} + + +/** + * @brief Clear whole configuration of a dedicated Exti line. + * @param hexti Exti handle. + * @retval HAL Status. + */ +HAL_StatusTypeDef HAL_EXTI_ClearConfigLine(EXTI_HandleTypeDef *hexti) +{ + __IO uint32_t *regaddr; + uint32_t regval; + uint32_t linepos; + uint32_t maskline; + uint32_t offset; + + /* Check null pointer */ + if (hexti == NULL) + { + return HAL_ERROR; + } + + /* Check the parameter */ + assert_param(IS_EXTI_LINE(hexti->Line)); + + /* compute line register offset and line mask */ + offset = ((hexti->Line & EXTI_REG_MASK) >> EXTI_REG_SHIFT); + linepos = (hexti->Line & EXTI_PIN_MASK); + maskline = (1uL << linepos); + + /* 1] Clear interrupt mode */ + regaddr = (&EXTI->IMR1 + (EXTI_MODE_OFFSET * offset)); + regval = (*regaddr & ~maskline); + *regaddr = regval; + + /* 2] Clear event mode */ + regaddr = (&EXTI->EMR1 + (EXTI_MODE_OFFSET * offset)); + regval = (*regaddr & ~maskline); + *regaddr = regval; + + /* 3] Clear triggers in case of configurable lines */ + if ((hexti->Line & EXTI_CONFIG) != 0x00u) + { + regaddr = (&EXTI->RTSR1 + (EXTI_CONFIG_OFFSET * offset)); + regval = (*regaddr & ~maskline); + *regaddr = regval; + + regaddr = (&EXTI->FTSR1 + (EXTI_CONFIG_OFFSET * offset)); + regval = (*regaddr & ~maskline); + *regaddr = regval; + + /* Get Gpio port selection for gpio lines */ + if ((hexti->Line & EXTI_GPIO) == EXTI_GPIO) + { + assert_param(IS_EXTI_GPIO_PIN(linepos)); + + regval = SYSCFG->EXTICR[linepos >> 2u]; + regval &= ~(SYSCFG_EXTICR1_EXTI0 << (SYSCFG_EXTICR1_EXTI1_Pos * (linepos & 0x03u))); + SYSCFG->EXTICR[linepos >> 2u] = regval; + } + } + + return HAL_OK; +} + + +/** + * @brief Register callback for a dedicated Exti line. + * @param hexti Exti handle. + * @param CallbackID User callback identifier. + * This parameter can be one of @arg @ref EXTI_CallbackIDTypeDef values. + * @param pPendingCbfn function pointer to be stored as callback. + * @retval HAL Status. + */ +HAL_StatusTypeDef HAL_EXTI_RegisterCallback(EXTI_HandleTypeDef *hexti, EXTI_CallbackIDTypeDef CallbackID, void (*pPendingCbfn)(void)) +{ + HAL_StatusTypeDef status = HAL_OK; + + switch (CallbackID) + { + case HAL_EXTI_COMMON_CB_ID: + hexti->PendingCallback = pPendingCbfn; + break; + + default: + status = HAL_ERROR; + break; + } + + return status; +} + + +/** + * @brief Store line number as handle private field. + * @param hexti Exti handle. + * @param ExtiLine Exti line number. + * This parameter can be from 0 to @ref EXTI_LINE_NB. + * @retval HAL Status. + */ +HAL_StatusTypeDef HAL_EXTI_GetHandle(EXTI_HandleTypeDef *hexti, uint32_t ExtiLine) +{ + /* Check the parameters */ + assert_param(IS_EXTI_LINE(ExtiLine)); + + /* Check null pointer */ + if (hexti == NULL) + { + return HAL_ERROR; + } + else + { + /* Store line number as handle private field */ + hexti->Line = ExtiLine; + + return HAL_OK; + } +} + + +/** + * @} + */ + +/** @addtogroup EXTI_Exported_Functions_Group2 + * @brief EXTI IO functions. + * +@verbatim + =============================================================================== + ##### IO operation functions ##### + =============================================================================== + +@endverbatim + * @{ + */ + +/** + * @brief Handle EXTI interrupt request. + * @param hexti Exti handle. + * @retval none. + */ +void HAL_EXTI_IRQHandler(EXTI_HandleTypeDef *hexti) +{ + __IO uint32_t *regaddr; + uint32_t regval; + uint32_t maskline; + uint32_t offset; + + /* Compute line register offset and line mask */ + offset = ((hexti->Line & EXTI_REG_MASK) >> EXTI_REG_SHIFT); + maskline = (1uL << (hexti->Line & EXTI_PIN_MASK)); + + /* Get pending bit */ + regaddr = (&EXTI->PR1 + (EXTI_CONFIG_OFFSET * offset)); + regval = (*regaddr & maskline); + + if (regval != 0x00u) + { + /* Clear pending bit */ + *regaddr = maskline; + + /* Call callback */ + if (hexti->PendingCallback != NULL) + { + hexti->PendingCallback(); + } + } +} + + +/** + * @brief Get interrupt pending bit of a dedicated line. + * @param hexti Exti handle. + * @param Edge Specify which pending edge as to be checked. + * This parameter can be one of the following values: + * @arg @ref EXTI_TRIGGER_RISING_FALLING + * This parameter is kept for compatibility with other series. + * @retval 1 if interrupt is pending else 0. + */ +uint32_t HAL_EXTI_GetPending(EXTI_HandleTypeDef *hexti, uint32_t Edge) +{ + __IO uint32_t *regaddr; + uint32_t regval; + uint32_t linepos; + uint32_t maskline; + uint32_t offset; + + /* Prevent unused argument(s) compilation warning */ + UNUSED(Edge); + + /* Check parameters */ + assert_param(IS_EXTI_LINE(hexti->Line)); + assert_param(IS_EXTI_CONFIG_LINE(hexti->Line)); + assert_param(IS_EXTI_PENDING_EDGE(Edge)); + + /* Compute line register offset and line mask */ + offset = ((hexti->Line & EXTI_REG_MASK) >> EXTI_REG_SHIFT); + linepos = (hexti->Line & EXTI_PIN_MASK); + maskline = (1uL << linepos); + + /* Get pending bit */ + regaddr = (&EXTI->PR1 + (EXTI_CONFIG_OFFSET * offset)); + + /* return 1 if bit is set else 0 */ + regval = ((*regaddr & maskline) >> linepos); + return regval; +} + + +/** + * @brief Clear interrupt pending bit of a dedicated line. + * @param hexti Exti handle. + * @param Edge Specify which pending edge as to be clear. + * This parameter can be one of the following values: + * @arg @ref EXTI_TRIGGER_RISING_FALLING + * This parameter is kept for compatibility with other series. + * @retval None. + */ +void HAL_EXTI_ClearPending(EXTI_HandleTypeDef *hexti, uint32_t Edge) +{ + __IO uint32_t *regaddr; + uint32_t maskline; + uint32_t offset; + + /* Prevent unused argument(s) compilation warning */ + UNUSED(Edge); + + /* Check parameters */ + assert_param(IS_EXTI_LINE(hexti->Line)); + assert_param(IS_EXTI_CONFIG_LINE(hexti->Line)); + assert_param(IS_EXTI_PENDING_EDGE(Edge)); + + /* compute line register offset and line mask */ + offset = ((hexti->Line & EXTI_REG_MASK) >> EXTI_REG_SHIFT); + maskline = (1uL << (hexti->Line & EXTI_PIN_MASK)); + + /* Get pending register address */ + regaddr = (&EXTI->PR1 + (EXTI_CONFIG_OFFSET * offset)); + + /* Clear Pending bit */ + *regaddr = maskline; +} + + +/** + * @brief Generate a software interrupt for a dedicated line. + * @param hexti Exti handle. + * @retval None. + */ +void HAL_EXTI_GenerateSWI(EXTI_HandleTypeDef *hexti) +{ + __IO uint32_t *regaddr; + uint32_t maskline; + uint32_t offset; + + /* Check parameters */ + assert_param(IS_EXTI_LINE(hexti->Line)); + assert_param(IS_EXTI_CONFIG_LINE(hexti->Line)); + + /* compute line register offset and line mask */ + offset = ((hexti->Line & EXTI_REG_MASK) >> EXTI_REG_SHIFT); + maskline = (1uL << (hexti->Line & EXTI_PIN_MASK)); + + regaddr = (&EXTI->SWIER1 + (EXTI_CONFIG_OFFSET * offset)); + *regaddr = maskline; +} + + +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_EXTI_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + diff --git a/CablePositioning_IAP_V1.0/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash.c b/CablePositioning_IAP_V1.0/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash.c index 531ff71..75fa3ea 100644 --- a/CablePositioning_IAP_V1.0/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash.c +++ b/CablePositioning_IAP_V1.0/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash.c @@ -1,764 +1,764 @@ -/** - ****************************************************************************** - * @file stm32l4xx_hal_flash.c - * @author MCD Application Team - * @brief FLASH HAL module driver. - * This file provides firmware functions to manage the following - * functionalities of the internal FLASH memory: - * + Program operations functions - * + Memory Control functions - * + Peripheral Errors functions - * - @verbatim - ============================================================================== - ##### FLASH peripheral features ##### - ============================================================================== - - [..] The Flash memory interface manages CPU AHB I-Code and D-Code accesses - to the Flash memory. It implements the erase and program Flash memory operations - and the read and write protection mechanisms. - - [..] The Flash memory interface accelerates code execution with a system of instruction - prefetch and cache lines. - - [..] The FLASH main features are: - (+) Flash memory read operations - (+) Flash memory program/erase operations - (+) Read / write protections - (+) Option bytes programming - (+) Prefetch on I-Code - (+) 32 cache lines of 4*64 bits on I-Code - (+) 8 cache lines of 4*64 bits on D-Code - (+) Error code correction (ECC) : Data in flash are 72-bits word - (8 bits added per double word) - - - ##### How to use this driver ##### - ============================================================================== - [..] - This driver provides functions and macros to configure and program the FLASH - memory of all STM32L4xx devices. - - (#) Flash Memory IO Programming functions: - (++) Lock and Unlock the FLASH interface using HAL_FLASH_Unlock() and - HAL_FLASH_Lock() functions - (++) Program functions: double word and fast program (full row programming) - (++) There Two modes of programming : - (+++) Polling mode using HAL_FLASH_Program() function - (+++) Interrupt mode using HAL_FLASH_Program_IT() function - - (#) Interrupts and flags management functions : - (++) Handle FLASH interrupts by calling HAL_FLASH_IRQHandler() - (++) Callback functions are called when the flash operations are finished : - HAL_FLASH_EndOfOperationCallback() when everything is ok, otherwise - HAL_FLASH_OperationErrorCallback() - (++) Get error flag status by calling HAL_GetError() - - (#) Option bytes management functions : - (++) Lock and Unlock the option bytes using HAL_FLASH_OB_Unlock() and - HAL_FLASH_OB_Lock() functions - (++) Launch the reload of the option bytes using HAL_FLASH_Launch() function. - In this case, a reset is generated - - [..] - In addition to these functions, this driver includes a set of macros allowing - to handle the following operations: - (+) Set the latency - (+) Enable/Disable the prefetch buffer - (+) Enable/Disable the Instruction cache and the Data cache - (+) Reset the Instruction cache and the Data cache - (+) Enable/Disable the Flash power-down during low-power run and sleep modes - (+) Enable/Disable the Flash interrupts - (+) Monitor the Flash flags status - - @endverbatim - ****************************************************************************** - * @attention - * - * Copyright (c) 2017 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file in - * the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32l4xx_hal.h" - -/** @addtogroup STM32L4xx_HAL_Driver - * @{ - */ - -/** @defgroup FLASH FLASH - * @brief FLASH HAL module driver - * @{ - */ - -#ifdef HAL_FLASH_MODULE_ENABLED - -/* Private typedef -----------------------------------------------------------*/ -/* Private defines -----------------------------------------------------------*/ -#if defined (STM32L4P5xx) || defined (STM32L4Q5xx) || defined (STM32L4R5xx) || defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined (STM32L4S9xx) -#define FLASH_NB_DOUBLE_WORDS_IN_ROW 64 -#else -#define FLASH_NB_DOUBLE_WORDS_IN_ROW 32 -#endif -/* Private macros ------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/** @defgroup FLASH_Private_Variables FLASH Private Variables - * @{ - */ -/** - * @brief Variable used for Program/Erase sectors under interruption - */ -FLASH_ProcessTypeDef pFlash = {.Lock = HAL_UNLOCKED, \ - .ErrorCode = HAL_FLASH_ERROR_NONE, \ - .ProcedureOnGoing = FLASH_PROC_NONE, \ - .Address = 0U, \ - .Bank = FLASH_BANK_1, \ - .Page = 0U, \ - .NbPagesToErase = 0U, \ - .CacheToReactivate = FLASH_CACHE_DISABLED}; -/** - * @} - */ - -/* Private function prototypes -----------------------------------------------*/ -/** @defgroup FLASH_Private_Functions FLASH Private Functions - * @{ - */ -static void FLASH_Program_DoubleWord(uint32_t Address, uint64_t Data); -static void FLASH_Program_Fast(uint32_t Address, uint32_t DataAddress); -/** - * @} - */ - -/* Exported functions --------------------------------------------------------*/ -/** @defgroup FLASH_Exported_Functions FLASH Exported Functions - * @{ - */ - -/** @defgroup FLASH_Exported_Functions_Group1 Programming operation functions - * @brief Programming operation functions - * -@verbatim - =============================================================================== - ##### Programming operation functions ##### - =============================================================================== - [..] - This subsection provides a set of functions allowing to manage the FLASH - program operations. - -@endverbatim - * @{ - */ - -/** - * @brief Program double word or fast program of a row at a specified address. - * @param TypeProgram Indicate the way to program at a specified address. - * This parameter can be a value of @ref FLASH_Type_Program - * @param Address specifies the address to be programmed. - * @param Data specifies the data to be programmed - * This parameter is the data for the double word program and the address where - * are stored the data for the row fast program - * - * @retval HAL_StatusTypeDef HAL Status - */ -HAL_StatusTypeDef HAL_FLASH_Program(uint32_t TypeProgram, uint32_t Address, uint64_t Data) -{ - HAL_StatusTypeDef status; - uint32_t prog_bit = 0; - - /* Process Locked */ - __HAL_LOCK(&pFlash); - - /* Check the parameters */ - assert_param(IS_FLASH_TYPEPROGRAM(TypeProgram)); - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); - - if(status == HAL_OK) - { - pFlash.ErrorCode = HAL_FLASH_ERROR_NONE; - - /* Deactivate the data cache if they are activated to avoid data misbehavior */ - if(READ_BIT(FLASH->ACR, FLASH_ACR_DCEN) != 0U) - { - /* Disable data cache */ - __HAL_FLASH_DATA_CACHE_DISABLE(); - pFlash.CacheToReactivate = FLASH_CACHE_DCACHE_ENABLED; - } - else - { - pFlash.CacheToReactivate = FLASH_CACHE_DISABLED; - } - - if(TypeProgram == FLASH_TYPEPROGRAM_DOUBLEWORD) - { - /* Program double-word (64-bit) at a specified address */ - FLASH_Program_DoubleWord(Address, Data); - prog_bit = FLASH_CR_PG; - } - else if((TypeProgram == FLASH_TYPEPROGRAM_FAST) || (TypeProgram == FLASH_TYPEPROGRAM_FAST_AND_LAST)) - { - /* Fast program a 32 row double-word (64-bit) at a specified address */ - FLASH_Program_Fast(Address, (uint32_t)Data); - - /* If it is the last row, the bit will be cleared at the end of the operation */ - if(TypeProgram == FLASH_TYPEPROGRAM_FAST_AND_LAST) - { - prog_bit = FLASH_CR_FSTPG; - } - } - else - { - /* Nothing to do */ - } - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); - - /* If the program operation is completed, disable the PG or FSTPG Bit */ - if (prog_bit != 0U) - { - CLEAR_BIT(FLASH->CR, prog_bit); - } - - /* Flush the caches to be sure of the data consistency */ - FLASH_FlushCaches(); - } - - /* Process Unlocked */ - __HAL_UNLOCK(&pFlash); - - return status; -} - -/** - * @brief Program double word or fast program of a row at a specified address with interrupt enabled. - * @param TypeProgram Indicate the way to program at a specified address. - * This parameter can be a value of @ref FLASH_Type_Program - * @param Address specifies the address to be programmed. - * @param Data specifies the data to be programmed - * This parameter is the data for the double word program and the address where - * are stored the data for the row fast program - * - * @retval HAL Status - */ -HAL_StatusTypeDef HAL_FLASH_Program_IT(uint32_t TypeProgram, uint32_t Address, uint64_t Data) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Check the parameters */ - assert_param(IS_FLASH_TYPEPROGRAM(TypeProgram)); - - /* Process Locked */ - __HAL_LOCK(&pFlash); - - pFlash.ErrorCode = HAL_FLASH_ERROR_NONE; - - /* Deactivate the data cache if they are activated to avoid data misbehavior */ - if(READ_BIT(FLASH->ACR, FLASH_ACR_DCEN) != 0U) - { - /* Disable data cache */ - __HAL_FLASH_DATA_CACHE_DISABLE(); - pFlash.CacheToReactivate = FLASH_CACHE_DCACHE_ENABLED; - } - else - { - pFlash.CacheToReactivate = FLASH_CACHE_DISABLED; - } - - /* Set internal variables used by the IRQ handler */ - if(TypeProgram == FLASH_TYPEPROGRAM_FAST_AND_LAST) - { - pFlash.ProcedureOnGoing = FLASH_PROC_PROGRAM_LAST; - } - else - { - pFlash.ProcedureOnGoing = FLASH_PROC_PROGRAM; - } - pFlash.Address = Address; - - /* Enable End of Operation and Error interrupts */ - __HAL_FLASH_ENABLE_IT(FLASH_IT_EOP | FLASH_IT_OPERR); - - if(TypeProgram == FLASH_TYPEPROGRAM_DOUBLEWORD) - { - /* Program double-word (64-bit) at a specified address */ - FLASH_Program_DoubleWord(Address, Data); - } - else if((TypeProgram == FLASH_TYPEPROGRAM_FAST) || (TypeProgram == FLASH_TYPEPROGRAM_FAST_AND_LAST)) - { - /* Fast program a 32 row double-word (64-bit) at a specified address */ - FLASH_Program_Fast(Address, (uint32_t)Data); - } - else - { - /* Nothing to do */ - } - - return status; -} - -/** - * @brief Handle FLASH interrupt request. - * @retval None - */ -void HAL_FLASH_IRQHandler(void) -{ - uint32_t tmp_page; - uint32_t error; - FLASH_ProcedureTypeDef procedure; - - /* If the operation is completed, disable the PG, PNB, MER1, MER2 and PER Bit */ - CLEAR_BIT(FLASH->CR, (FLASH_CR_PG | FLASH_CR_MER1 | FLASH_CR_PER | FLASH_CR_PNB)); -#if defined (STM32L471xx) || defined (STM32L475xx) || defined (STM32L476xx) || defined (STM32L485xx) || defined (STM32L486xx) || \ - defined (STM32L496xx) || defined (STM32L4A6xx) || \ - defined (STM32L4P5xx) || defined (STM32L4Q5xx) || \ - defined (STM32L4R5xx) || defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined (STM32L4S9xx) - CLEAR_BIT(FLASH->CR, FLASH_CR_MER2); -#endif - - /* Disable the FSTPG Bit only if it is the last row programmed */ - if(pFlash.ProcedureOnGoing == FLASH_PROC_PROGRAM_LAST) - { - CLEAR_BIT(FLASH->CR, FLASH_CR_FSTPG); - } - - /* Check FLASH operation error flags */ - error = (FLASH->SR & FLASH_FLAG_SR_ERRORS); - - if (error !=0U) - { - /*Save the error code*/ - pFlash.ErrorCode |= error; - - /* Clear error programming flags */ - __HAL_FLASH_CLEAR_FLAG(error); - - /* Flush the caches to be sure of the data consistency */ - FLASH_FlushCaches() ; - - /* FLASH error interrupt user callback */ - procedure = pFlash.ProcedureOnGoing; - if(procedure == FLASH_PROC_PAGE_ERASE) - { - HAL_FLASH_OperationErrorCallback(pFlash.Page); - } - else if(procedure == FLASH_PROC_MASS_ERASE) - { - HAL_FLASH_OperationErrorCallback(pFlash.Bank); - } - else if((procedure == FLASH_PROC_PROGRAM) || - (procedure == FLASH_PROC_PROGRAM_LAST)) - { - HAL_FLASH_OperationErrorCallback(pFlash.Address); - } - else - { - HAL_FLASH_OperationErrorCallback(0U); - } - - /*Stop the procedure ongoing*/ - pFlash.ProcedureOnGoing = FLASH_PROC_NONE; - } - - /* Check FLASH End of Operation flag */ - if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_EOP) != 0U) - { - /* Clear FLASH End of Operation pending bit */ - __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_EOP); - - if(pFlash.ProcedureOnGoing == FLASH_PROC_PAGE_ERASE) - { - /* Nb of pages to erased can be decreased */ - pFlash.NbPagesToErase--; - - /* Check if there are still pages to erase*/ - if(pFlash.NbPagesToErase != 0U) - { - /* Indicate user which page has been erased*/ - HAL_FLASH_EndOfOperationCallback(pFlash.Page); - - /* Increment page number */ - pFlash.Page++; - tmp_page = pFlash.Page; - FLASH_PageErase(tmp_page, pFlash.Bank); - } - else - { - /* No more pages to Erase */ - /* Reset Address and stop Erase pages procedure */ - pFlash.Page = 0xFFFFFFFFU; - pFlash.ProcedureOnGoing = FLASH_PROC_NONE; - - /* Flush the caches to be sure of the data consistency */ - FLASH_FlushCaches() ; - - /* FLASH EOP interrupt user callback */ - HAL_FLASH_EndOfOperationCallback(pFlash.Page); - } - } - else - { - /* Flush the caches to be sure of the data consistency */ - FLASH_FlushCaches() ; - - procedure = pFlash.ProcedureOnGoing; - if(procedure == FLASH_PROC_MASS_ERASE) - { - /* MassErase ended. Return the selected bank */ - /* FLASH EOP interrupt user callback */ - HAL_FLASH_EndOfOperationCallback(pFlash.Bank); - } - else if((procedure == FLASH_PROC_PROGRAM) || - (procedure == FLASH_PROC_PROGRAM_LAST)) - { - /* Program ended. Return the selected address */ - /* FLASH EOP interrupt user callback */ - HAL_FLASH_EndOfOperationCallback(pFlash.Address); - } - else - { - /* Nothing to do */ - } - - /*Clear the procedure ongoing*/ - pFlash.ProcedureOnGoing = FLASH_PROC_NONE; - } - } - - if(pFlash.ProcedureOnGoing == FLASH_PROC_NONE) - { - /* Disable End of Operation and Error interrupts */ - __HAL_FLASH_DISABLE_IT(FLASH_IT_EOP | FLASH_IT_OPERR); - - /* Process Unlocked */ - __HAL_UNLOCK(&pFlash); - } -} - -/** - * @brief FLASH end of operation interrupt callback. - * @param ReturnValue The value saved in this parameter depends on the ongoing procedure - * Mass Erase: Bank number which has been requested to erase - * Page Erase: Page which has been erased - * (if 0xFFFFFFFF, it means that all the selected pages have been erased) - * Program: Address which was selected for data program - * @retval None - */ -__weak void HAL_FLASH_EndOfOperationCallback(uint32_t ReturnValue) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(ReturnValue); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_FLASH_EndOfOperationCallback could be implemented in the user file - */ -} - -/** - * @brief FLASH operation error interrupt callback. - * @param ReturnValue The value saved in this parameter depends on the ongoing procedure - * Mass Erase: Bank number which has been requested to erase - * Page Erase: Page number which returned an error - * Program: Address which was selected for data program - * @retval None - */ -__weak void HAL_FLASH_OperationErrorCallback(uint32_t ReturnValue) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(ReturnValue); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_FLASH_OperationErrorCallback could be implemented in the user file - */ -} - -/** - * @} - */ - -/** @defgroup FLASH_Exported_Functions_Group2 Peripheral Control functions - * @brief Management functions - * -@verbatim - =============================================================================== - ##### Peripheral Control functions ##### - =============================================================================== - [..] - This subsection provides a set of functions allowing to control the FLASH - memory operations. - -@endverbatim - * @{ - */ - -/** - * @brief Unlock the FLASH control register access. - * @retval HAL Status - */ -HAL_StatusTypeDef HAL_FLASH_Unlock(void) -{ - HAL_StatusTypeDef status = HAL_OK; - - if(READ_BIT(FLASH->CR, FLASH_CR_LOCK) != 0U) - { - /* Authorize the FLASH Registers access */ - WRITE_REG(FLASH->KEYR, FLASH_KEY1); - WRITE_REG(FLASH->KEYR, FLASH_KEY2); - - /* Verify Flash is unlocked */ - if(READ_BIT(FLASH->CR, FLASH_CR_LOCK) != 0U) - { - status = HAL_ERROR; - } - } - - return status; -} - -/** - * @brief Lock the FLASH control register access. - * @retval HAL Status - */ -HAL_StatusTypeDef HAL_FLASH_Lock(void) -{ - /* Set the LOCK Bit to lock the FLASH Registers access */ - SET_BIT(FLASH->CR, FLASH_CR_LOCK); - - return HAL_OK; -} - -/** - * @brief Unlock the FLASH Option Bytes Registers access. - * @retval HAL Status - */ -HAL_StatusTypeDef HAL_FLASH_OB_Unlock(void) -{ - if(READ_BIT(FLASH->CR, FLASH_CR_OPTLOCK) != 0U) - { - /* Authorizes the Option Byte register programming */ - WRITE_REG(FLASH->OPTKEYR, FLASH_OPTKEY1); - WRITE_REG(FLASH->OPTKEYR, FLASH_OPTKEY2); - } - else - { - return HAL_ERROR; - } - - return HAL_OK; -} - -/** - * @brief Lock the FLASH Option Bytes Registers access. - * @retval HAL Status - */ -HAL_StatusTypeDef HAL_FLASH_OB_Lock(void) -{ - /* Set the OPTLOCK Bit to lock the FLASH Option Byte Registers access */ - SET_BIT(FLASH->CR, FLASH_CR_OPTLOCK); - - return HAL_OK; -} - -/** - * @brief Launch the option byte loading. - * @retval HAL Status - */ -HAL_StatusTypeDef HAL_FLASH_OB_Launch(void) -{ - /* Set the bit to force the option byte reloading */ - SET_BIT(FLASH->CR, FLASH_CR_OBL_LAUNCH); - - /* Wait for last operation to be completed */ - return(FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE)); -} - -/** - * @} - */ - -/** @defgroup FLASH_Exported_Functions_Group3 Peripheral State and Errors functions - * @brief Peripheral Errors functions - * -@verbatim - =============================================================================== - ##### Peripheral Errors functions ##### - =============================================================================== - [..] - This subsection permits to get in run-time Errors of the FLASH peripheral. - -@endverbatim - * @{ - */ - -/** - * @brief Get the specific FLASH error flag. - * @retval FLASH_ErrorCode: The returned value can be: - * @arg HAL_FLASH_ERROR_RD: FLASH Read Protection error flag (PCROP) - * @arg HAL_FLASH_ERROR_PGS: FLASH Programming Sequence error flag - * @arg HAL_FLASH_ERROR_PGP: FLASH Programming Parallelism error flag - * @arg HAL_FLASH_ERROR_PGA: FLASH Programming Alignment error flag - * @arg HAL_FLASH_ERROR_WRP: FLASH Write protected error flag - * @arg HAL_FLASH_ERROR_OPERATION: FLASH operation Error flag - * @arg HAL_FLASH_ERROR_NONE: No error set - * @arg HAL_FLASH_ERROR_OP: FLASH Operation error - * @arg HAL_FLASH_ERROR_PROG: FLASH Programming error - * @arg HAL_FLASH_ERROR_WRP: FLASH Write protection error - * @arg HAL_FLASH_ERROR_PGA: FLASH Programming alignment error - * @arg HAL_FLASH_ERROR_SIZ: FLASH Size error - * @arg HAL_FLASH_ERROR_PGS: FLASH Programming sequence error - * @arg HAL_FLASH_ERROR_MIS: FLASH Fast programming data miss error - * @arg HAL_FLASH_ERROR_FAST: FLASH Fast programming error - * @arg HAL_FLASH_ERROR_RD: FLASH PCROP read error - * @arg HAL_FLASH_ERROR_OPTV: FLASH Option validity error - * @arg FLASH_FLAG_PEMPTY : FLASH Boot from not programmed flash (apply only for STM32L43x/STM32L44x devices) - */ -uint32_t HAL_FLASH_GetError(void) -{ - return pFlash.ErrorCode; -} - -/** - * @} - */ - -/** - * @} - */ - -/* Private functions ---------------------------------------------------------*/ - -/** @addtogroup FLASH_Private_Functions - * @{ - */ - -/** - * @brief Wait for a FLASH operation to complete. - * @param Timeout maximum flash operation timeout - * @retval HAL_StatusTypeDef HAL Status - */ -HAL_StatusTypeDef FLASH_WaitForLastOperation(uint32_t Timeout) -{ - /* Wait for the FLASH operation to complete by polling on BUSY flag to be reset. - Even if the FLASH operation fails, the BUSY flag will be reset and an error - flag will be set */ - - uint32_t tickstart = HAL_GetTick(); - uint32_t error; - - while(__HAL_FLASH_GET_FLAG(FLASH_FLAG_BSY)) - { - if(Timeout != HAL_MAX_DELAY) - { - if((HAL_GetTick() - tickstart) >= Timeout) - { - return HAL_TIMEOUT; - } - } - } - - error = (FLASH->SR & FLASH_FLAG_SR_ERRORS); - - if(error != 0u) - { - /*Save the error code*/ - pFlash.ErrorCode |= error; - - /* Clear error programming flags */ - __HAL_FLASH_CLEAR_FLAG(error); - - return HAL_ERROR; - } - - /* Check FLASH End of Operation flag */ - if (__HAL_FLASH_GET_FLAG(FLASH_FLAG_EOP)) - { - /* Clear FLASH End of Operation pending bit */ - __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_EOP); - } - - /* If there is an error flag set */ - return HAL_OK; -} - -/** - * @brief Program double-word (64-bit) at a specified address. - * @param Address specifies the address to be programmed. - * @param Data specifies the data to be programmed. - * @retval None - */ -static void FLASH_Program_DoubleWord(uint32_t Address, uint64_t Data) -{ - /* Check the parameters */ - assert_param(IS_FLASH_PROGRAM_ADDRESS(Address)); - - /* Set PG bit */ - SET_BIT(FLASH->CR, FLASH_CR_PG); - - /* Program first word */ - *(__IO uint32_t*)Address = (uint32_t)Data; - - /* Barrier to ensure programming is performed in 2 steps, in right order - (independently of compiler optimization behavior) */ - __ISB(); - - /* Program second word */ - *(__IO uint32_t*)(Address+4U) = (uint32_t)(Data >> 32); -} - -/** - * @brief Fast program a row double-word (64-bit) at a specified address. - * @param Address specifies the address to be programmed. - * @param DataAddress specifies the address where the data are stored. - * @retval None - */ -static void FLASH_Program_Fast(uint32_t Address, uint32_t DataAddress) -{ - uint32_t primask_bit; - uint8_t row_index = (2*FLASH_NB_DOUBLE_WORDS_IN_ROW); - __IO uint32_t *dest_addr = (__IO uint32_t*)Address; - __IO uint32_t *src_addr = (__IO uint32_t*)DataAddress; - - /* Check the parameters */ - assert_param(IS_FLASH_MAIN_MEM_ADDRESS(Address)); - - /* Set FSTPG bit */ - SET_BIT(FLASH->CR, FLASH_CR_FSTPG); - - /* Disable interrupts to avoid any interruption during the loop */ - primask_bit = __get_PRIMASK(); - __disable_irq(); - - /* Program the double word of the row */ - do - { - *dest_addr = *src_addr; - dest_addr++; - src_addr++; - row_index--; - } while (row_index != 0U); - - /* Re-enable the interrupts */ - __set_PRIMASK(primask_bit); -} - -/** - * @} - */ - -#endif /* HAL_FLASH_MODULE_ENABLED */ - -/** - * @} - */ - -/** - * @} - */ - +/** + ****************************************************************************** + * @file stm32l4xx_hal_flash.c + * @author MCD Application Team + * @brief FLASH HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the internal FLASH memory: + * + Program operations functions + * + Memory Control functions + * + Peripheral Errors functions + * + @verbatim + ============================================================================== + ##### FLASH peripheral features ##### + ============================================================================== + + [..] The Flash memory interface manages CPU AHB I-Code and D-Code accesses + to the Flash memory. It implements the erase and program Flash memory operations + and the read and write protection mechanisms. + + [..] The Flash memory interface accelerates code execution with a system of instruction + prefetch and cache lines. + + [..] The FLASH main features are: + (+) Flash memory read operations + (+) Flash memory program/erase operations + (+) Read / write protections + (+) Option bytes programming + (+) Prefetch on I-Code + (+) 32 cache lines of 4*64 bits on I-Code + (+) 8 cache lines of 4*64 bits on D-Code + (+) Error code correction (ECC) : Data in flash are 72-bits word + (8 bits added per double word) + + + ##### How to use this driver ##### + ============================================================================== + [..] + This driver provides functions and macros to configure and program the FLASH + memory of all STM32L4xx devices. + + (#) Flash Memory IO Programming functions: + (++) Lock and Unlock the FLASH interface using HAL_FLASH_Unlock() and + HAL_FLASH_Lock() functions + (++) Program functions: double word and fast program (full row programming) + (++) There Two modes of programming : + (+++) Polling mode using HAL_FLASH_Program() function + (+++) Interrupt mode using HAL_FLASH_Program_IT() function + + (#) Interrupts and flags management functions : + (++) Handle FLASH interrupts by calling HAL_FLASH_IRQHandler() + (++) Callback functions are called when the flash operations are finished : + HAL_FLASH_EndOfOperationCallback() when everything is ok, otherwise + HAL_FLASH_OperationErrorCallback() + (++) Get error flag status by calling HAL_GetError() + + (#) Option bytes management functions : + (++) Lock and Unlock the option bytes using HAL_FLASH_OB_Unlock() and + HAL_FLASH_OB_Lock() functions + (++) Launch the reload of the option bytes using HAL_FLASH_Launch() function. + In this case, a reset is generated + + [..] + In addition to these functions, this driver includes a set of macros allowing + to handle the following operations: + (+) Set the latency + (+) Enable/Disable the prefetch buffer + (+) Enable/Disable the Instruction cache and the Data cache + (+) Reset the Instruction cache and the Data cache + (+) Enable/Disable the Flash power-down during low-power run and sleep modes + (+) Enable/Disable the Flash interrupts + (+) Monitor the Flash flags status + + @endverbatim + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file in + * the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l4xx_hal.h" + +/** @addtogroup STM32L4xx_HAL_Driver + * @{ + */ + +/** @defgroup FLASH FLASH + * @brief FLASH HAL module driver + * @{ + */ + +#ifdef HAL_FLASH_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private defines -----------------------------------------------------------*/ +#if defined (STM32L4P5xx) || defined (STM32L4Q5xx) || defined (STM32L4R5xx) || defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined (STM32L4S9xx) +#define FLASH_NB_DOUBLE_WORDS_IN_ROW 64 +#else +#define FLASH_NB_DOUBLE_WORDS_IN_ROW 32 +#endif +/* Private macros ------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/** @defgroup FLASH_Private_Variables FLASH Private Variables + * @{ + */ +/** + * @brief Variable used for Program/Erase sectors under interruption + */ +FLASH_ProcessTypeDef pFlash = {.Lock = HAL_UNLOCKED, \ + .ErrorCode = HAL_FLASH_ERROR_NONE, \ + .ProcedureOnGoing = FLASH_PROC_NONE, \ + .Address = 0U, \ + .Bank = FLASH_BANK_1, \ + .Page = 0U, \ + .NbPagesToErase = 0U, \ + .CacheToReactivate = FLASH_CACHE_DISABLED}; +/** + * @} + */ + +/* Private function prototypes -----------------------------------------------*/ +/** @defgroup FLASH_Private_Functions FLASH Private Functions + * @{ + */ +static void FLASH_Program_DoubleWord(uint32_t Address, uint64_t Data); +static void FLASH_Program_Fast(uint32_t Address, uint32_t DataAddress); +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup FLASH_Exported_Functions FLASH Exported Functions + * @{ + */ + +/** @defgroup FLASH_Exported_Functions_Group1 Programming operation functions + * @brief Programming operation functions + * +@verbatim + =============================================================================== + ##### Programming operation functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to manage the FLASH + program operations. + +@endverbatim + * @{ + */ + +/** + * @brief Program double word or fast program of a row at a specified address. + * @param TypeProgram Indicate the way to program at a specified address. + * This parameter can be a value of @ref FLASH_Type_Program + * @param Address specifies the address to be programmed. + * @param Data specifies the data to be programmed + * This parameter is the data for the double word program and the address where + * are stored the data for the row fast program + * + * @retval HAL_StatusTypeDef HAL Status + */ +HAL_StatusTypeDef HAL_FLASH_Program(uint32_t TypeProgram, uint32_t Address, uint64_t Data) +{ + HAL_StatusTypeDef status; + uint32_t prog_bit = 0; + + /* Process Locked */ + __HAL_LOCK(&pFlash); + + /* Check the parameters */ + assert_param(IS_FLASH_TYPEPROGRAM(TypeProgram)); + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); + + if(status == HAL_OK) + { + pFlash.ErrorCode = HAL_FLASH_ERROR_NONE; + + /* Deactivate the data cache if they are activated to avoid data misbehavior */ + if(READ_BIT(FLASH->ACR, FLASH_ACR_DCEN) != 0U) + { + /* Disable data cache */ + __HAL_FLASH_DATA_CACHE_DISABLE(); + pFlash.CacheToReactivate = FLASH_CACHE_DCACHE_ENABLED; + } + else + { + pFlash.CacheToReactivate = FLASH_CACHE_DISABLED; + } + + if(TypeProgram == FLASH_TYPEPROGRAM_DOUBLEWORD) + { + /* Program double-word (64-bit) at a specified address */ + FLASH_Program_DoubleWord(Address, Data); + prog_bit = FLASH_CR_PG; + } + else if((TypeProgram == FLASH_TYPEPROGRAM_FAST) || (TypeProgram == FLASH_TYPEPROGRAM_FAST_AND_LAST)) + { + /* Fast program a 32 row double-word (64-bit) at a specified address */ + FLASH_Program_Fast(Address, (uint32_t)Data); + + /* If it is the last row, the bit will be cleared at the end of the operation */ + if(TypeProgram == FLASH_TYPEPROGRAM_FAST_AND_LAST) + { + prog_bit = FLASH_CR_FSTPG; + } + } + else + { + /* Nothing to do */ + } + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); + + /* If the program operation is completed, disable the PG or FSTPG Bit */ + if (prog_bit != 0U) + { + CLEAR_BIT(FLASH->CR, prog_bit); + } + + /* Flush the caches to be sure of the data consistency */ + FLASH_FlushCaches(); + } + + /* Process Unlocked */ + __HAL_UNLOCK(&pFlash); + + return status; +} + +/** + * @brief Program double word or fast program of a row at a specified address with interrupt enabled. + * @param TypeProgram Indicate the way to program at a specified address. + * This parameter can be a value of @ref FLASH_Type_Program + * @param Address specifies the address to be programmed. + * @param Data specifies the data to be programmed + * This parameter is the data for the double word program and the address where + * are stored the data for the row fast program + * + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_FLASH_Program_IT(uint32_t TypeProgram, uint32_t Address, uint64_t Data) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_FLASH_TYPEPROGRAM(TypeProgram)); + + /* Process Locked */ + __HAL_LOCK(&pFlash); + + pFlash.ErrorCode = HAL_FLASH_ERROR_NONE; + + /* Deactivate the data cache if they are activated to avoid data misbehavior */ + if(READ_BIT(FLASH->ACR, FLASH_ACR_DCEN) != 0U) + { + /* Disable data cache */ + __HAL_FLASH_DATA_CACHE_DISABLE(); + pFlash.CacheToReactivate = FLASH_CACHE_DCACHE_ENABLED; + } + else + { + pFlash.CacheToReactivate = FLASH_CACHE_DISABLED; + } + + /* Set internal variables used by the IRQ handler */ + if(TypeProgram == FLASH_TYPEPROGRAM_FAST_AND_LAST) + { + pFlash.ProcedureOnGoing = FLASH_PROC_PROGRAM_LAST; + } + else + { + pFlash.ProcedureOnGoing = FLASH_PROC_PROGRAM; + } + pFlash.Address = Address; + + /* Enable End of Operation and Error interrupts */ + __HAL_FLASH_ENABLE_IT(FLASH_IT_EOP | FLASH_IT_OPERR); + + if(TypeProgram == FLASH_TYPEPROGRAM_DOUBLEWORD) + { + /* Program double-word (64-bit) at a specified address */ + FLASH_Program_DoubleWord(Address, Data); + } + else if((TypeProgram == FLASH_TYPEPROGRAM_FAST) || (TypeProgram == FLASH_TYPEPROGRAM_FAST_AND_LAST)) + { + /* Fast program a 32 row double-word (64-bit) at a specified address */ + FLASH_Program_Fast(Address, (uint32_t)Data); + } + else + { + /* Nothing to do */ + } + + return status; +} + +/** + * @brief Handle FLASH interrupt request. + * @retval None + */ +void HAL_FLASH_IRQHandler(void) +{ + uint32_t tmp_page; + uint32_t error; + FLASH_ProcedureTypeDef procedure; + + /* If the operation is completed, disable the PG, PNB, MER1, MER2 and PER Bit */ + CLEAR_BIT(FLASH->CR, (FLASH_CR_PG | FLASH_CR_MER1 | FLASH_CR_PER | FLASH_CR_PNB)); +#if defined (STM32L471xx) || defined (STM32L475xx) || defined (STM32L476xx) || defined (STM32L485xx) || defined (STM32L486xx) || \ + defined (STM32L496xx) || defined (STM32L4A6xx) || \ + defined (STM32L4P5xx) || defined (STM32L4Q5xx) || \ + defined (STM32L4R5xx) || defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined (STM32L4S9xx) + CLEAR_BIT(FLASH->CR, FLASH_CR_MER2); +#endif + + /* Disable the FSTPG Bit only if it is the last row programmed */ + if(pFlash.ProcedureOnGoing == FLASH_PROC_PROGRAM_LAST) + { + CLEAR_BIT(FLASH->CR, FLASH_CR_FSTPG); + } + + /* Check FLASH operation error flags */ + error = (FLASH->SR & FLASH_FLAG_SR_ERRORS); + + if (error !=0U) + { + /*Save the error code*/ + pFlash.ErrorCode |= error; + + /* Clear error programming flags */ + __HAL_FLASH_CLEAR_FLAG(error); + + /* Flush the caches to be sure of the data consistency */ + FLASH_FlushCaches() ; + + /* FLASH error interrupt user callback */ + procedure = pFlash.ProcedureOnGoing; + if(procedure == FLASH_PROC_PAGE_ERASE) + { + HAL_FLASH_OperationErrorCallback(pFlash.Page); + } + else if(procedure == FLASH_PROC_MASS_ERASE) + { + HAL_FLASH_OperationErrorCallback(pFlash.Bank); + } + else if((procedure == FLASH_PROC_PROGRAM) || + (procedure == FLASH_PROC_PROGRAM_LAST)) + { + HAL_FLASH_OperationErrorCallback(pFlash.Address); + } + else + { + HAL_FLASH_OperationErrorCallback(0U); + } + + /*Stop the procedure ongoing*/ + pFlash.ProcedureOnGoing = FLASH_PROC_NONE; + } + + /* Check FLASH End of Operation flag */ + if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_EOP) != 0U) + { + /* Clear FLASH End of Operation pending bit */ + __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_EOP); + + if(pFlash.ProcedureOnGoing == FLASH_PROC_PAGE_ERASE) + { + /* Nb of pages to erased can be decreased */ + pFlash.NbPagesToErase--; + + /* Check if there are still pages to erase*/ + if(pFlash.NbPagesToErase != 0U) + { + /* Indicate user which page has been erased*/ + HAL_FLASH_EndOfOperationCallback(pFlash.Page); + + /* Increment page number */ + pFlash.Page++; + tmp_page = pFlash.Page; + FLASH_PageErase(tmp_page, pFlash.Bank); + } + else + { + /* No more pages to Erase */ + /* Reset Address and stop Erase pages procedure */ + pFlash.Page = 0xFFFFFFFFU; + pFlash.ProcedureOnGoing = FLASH_PROC_NONE; + + /* Flush the caches to be sure of the data consistency */ + FLASH_FlushCaches() ; + + /* FLASH EOP interrupt user callback */ + HAL_FLASH_EndOfOperationCallback(pFlash.Page); + } + } + else + { + /* Flush the caches to be sure of the data consistency */ + FLASH_FlushCaches() ; + + procedure = pFlash.ProcedureOnGoing; + if(procedure == FLASH_PROC_MASS_ERASE) + { + /* MassErase ended. Return the selected bank */ + /* FLASH EOP interrupt user callback */ + HAL_FLASH_EndOfOperationCallback(pFlash.Bank); + } + else if((procedure == FLASH_PROC_PROGRAM) || + (procedure == FLASH_PROC_PROGRAM_LAST)) + { + /* Program ended. Return the selected address */ + /* FLASH EOP interrupt user callback */ + HAL_FLASH_EndOfOperationCallback(pFlash.Address); + } + else + { + /* Nothing to do */ + } + + /*Clear the procedure ongoing*/ + pFlash.ProcedureOnGoing = FLASH_PROC_NONE; + } + } + + if(pFlash.ProcedureOnGoing == FLASH_PROC_NONE) + { + /* Disable End of Operation and Error interrupts */ + __HAL_FLASH_DISABLE_IT(FLASH_IT_EOP | FLASH_IT_OPERR); + + /* Process Unlocked */ + __HAL_UNLOCK(&pFlash); + } +} + +/** + * @brief FLASH end of operation interrupt callback. + * @param ReturnValue The value saved in this parameter depends on the ongoing procedure + * Mass Erase: Bank number which has been requested to erase + * Page Erase: Page which has been erased + * (if 0xFFFFFFFF, it means that all the selected pages have been erased) + * Program: Address which was selected for data program + * @retval None + */ +__weak void HAL_FLASH_EndOfOperationCallback(uint32_t ReturnValue) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(ReturnValue); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_FLASH_EndOfOperationCallback could be implemented in the user file + */ +} + +/** + * @brief FLASH operation error interrupt callback. + * @param ReturnValue The value saved in this parameter depends on the ongoing procedure + * Mass Erase: Bank number which has been requested to erase + * Page Erase: Page number which returned an error + * Program: Address which was selected for data program + * @retval None + */ +__weak void HAL_FLASH_OperationErrorCallback(uint32_t ReturnValue) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(ReturnValue); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_FLASH_OperationErrorCallback could be implemented in the user file + */ +} + +/** + * @} + */ + +/** @defgroup FLASH_Exported_Functions_Group2 Peripheral Control functions + * @brief Management functions + * +@verbatim + =============================================================================== + ##### Peripheral Control functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to control the FLASH + memory operations. + +@endverbatim + * @{ + */ + +/** + * @brief Unlock the FLASH control register access. + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_FLASH_Unlock(void) +{ + HAL_StatusTypeDef status = HAL_OK; + + if(READ_BIT(FLASH->CR, FLASH_CR_LOCK) != 0U) + { + /* Authorize the FLASH Registers access */ + WRITE_REG(FLASH->KEYR, FLASH_KEY1); + WRITE_REG(FLASH->KEYR, FLASH_KEY2); + + /* Verify Flash is unlocked */ + if(READ_BIT(FLASH->CR, FLASH_CR_LOCK) != 0U) + { + status = HAL_ERROR; + } + } + + return status; +} + +/** + * @brief Lock the FLASH control register access. + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_FLASH_Lock(void) +{ + /* Set the LOCK Bit to lock the FLASH Registers access */ + SET_BIT(FLASH->CR, FLASH_CR_LOCK); + + return HAL_OK; +} + +/** + * @brief Unlock the FLASH Option Bytes Registers access. + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_FLASH_OB_Unlock(void) +{ + if(READ_BIT(FLASH->CR, FLASH_CR_OPTLOCK) != 0U) + { + /* Authorizes the Option Byte register programming */ + WRITE_REG(FLASH->OPTKEYR, FLASH_OPTKEY1); + WRITE_REG(FLASH->OPTKEYR, FLASH_OPTKEY2); + } + else + { + return HAL_ERROR; + } + + return HAL_OK; +} + +/** + * @brief Lock the FLASH Option Bytes Registers access. + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_FLASH_OB_Lock(void) +{ + /* Set the OPTLOCK Bit to lock the FLASH Option Byte Registers access */ + SET_BIT(FLASH->CR, FLASH_CR_OPTLOCK); + + return HAL_OK; +} + +/** + * @brief Launch the option byte loading. + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_FLASH_OB_Launch(void) +{ + /* Set the bit to force the option byte reloading */ + SET_BIT(FLASH->CR, FLASH_CR_OBL_LAUNCH); + + /* Wait for last operation to be completed */ + return(FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE)); +} + +/** + * @} + */ + +/** @defgroup FLASH_Exported_Functions_Group3 Peripheral State and Errors functions + * @brief Peripheral Errors functions + * +@verbatim + =============================================================================== + ##### Peripheral Errors functions ##### + =============================================================================== + [..] + This subsection permits to get in run-time Errors of the FLASH peripheral. + +@endverbatim + * @{ + */ + +/** + * @brief Get the specific FLASH error flag. + * @retval FLASH_ErrorCode: The returned value can be: + * @arg HAL_FLASH_ERROR_RD: FLASH Read Protection error flag (PCROP) + * @arg HAL_FLASH_ERROR_PGS: FLASH Programming Sequence error flag + * @arg HAL_FLASH_ERROR_PGP: FLASH Programming Parallelism error flag + * @arg HAL_FLASH_ERROR_PGA: FLASH Programming Alignment error flag + * @arg HAL_FLASH_ERROR_WRP: FLASH Write protected error flag + * @arg HAL_FLASH_ERROR_OPERATION: FLASH operation Error flag + * @arg HAL_FLASH_ERROR_NONE: No error set + * @arg HAL_FLASH_ERROR_OP: FLASH Operation error + * @arg HAL_FLASH_ERROR_PROG: FLASH Programming error + * @arg HAL_FLASH_ERROR_WRP: FLASH Write protection error + * @arg HAL_FLASH_ERROR_PGA: FLASH Programming alignment error + * @arg HAL_FLASH_ERROR_SIZ: FLASH Size error + * @arg HAL_FLASH_ERROR_PGS: FLASH Programming sequence error + * @arg HAL_FLASH_ERROR_MIS: FLASH Fast programming data miss error + * @arg HAL_FLASH_ERROR_FAST: FLASH Fast programming error + * @arg HAL_FLASH_ERROR_RD: FLASH PCROP read error + * @arg HAL_FLASH_ERROR_OPTV: FLASH Option validity error + * @arg FLASH_FLAG_PEMPTY : FLASH Boot from not programmed flash (apply only for STM32L43x/STM32L44x devices) + */ +uint32_t HAL_FLASH_GetError(void) +{ + return pFlash.ErrorCode; +} + +/** + * @} + */ + +/** + * @} + */ + +/* Private functions ---------------------------------------------------------*/ + +/** @addtogroup FLASH_Private_Functions + * @{ + */ + +/** + * @brief Wait for a FLASH operation to complete. + * @param Timeout maximum flash operation timeout + * @retval HAL_StatusTypeDef HAL Status + */ +HAL_StatusTypeDef FLASH_WaitForLastOperation(uint32_t Timeout) +{ + /* Wait for the FLASH operation to complete by polling on BUSY flag to be reset. + Even if the FLASH operation fails, the BUSY flag will be reset and an error + flag will be set */ + + uint32_t tickstart = HAL_GetTick(); + uint32_t error; + + while(__HAL_FLASH_GET_FLAG(FLASH_FLAG_BSY)) + { + if(Timeout != HAL_MAX_DELAY) + { + if((HAL_GetTick() - tickstart) >= Timeout) + { + return HAL_TIMEOUT; + } + } + } + + error = (FLASH->SR & FLASH_FLAG_SR_ERRORS); + + if(error != 0u) + { + /*Save the error code*/ + pFlash.ErrorCode |= error; + + /* Clear error programming flags */ + __HAL_FLASH_CLEAR_FLAG(error); + + return HAL_ERROR; + } + + /* Check FLASH End of Operation flag */ + if (__HAL_FLASH_GET_FLAG(FLASH_FLAG_EOP)) + { + /* Clear FLASH End of Operation pending bit */ + __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_EOP); + } + + /* If there is an error flag set */ + return HAL_OK; +} + +/** + * @brief Program double-word (64-bit) at a specified address. + * @param Address specifies the address to be programmed. + * @param Data specifies the data to be programmed. + * @retval None + */ +static void FLASH_Program_DoubleWord(uint32_t Address, uint64_t Data) +{ + /* Check the parameters */ + assert_param(IS_FLASH_PROGRAM_ADDRESS(Address)); + + /* Set PG bit */ + SET_BIT(FLASH->CR, FLASH_CR_PG); + + /* Program first word */ + *(__IO uint32_t*)Address = (uint32_t)Data; + + /* Barrier to ensure programming is performed in 2 steps, in right order + (independently of compiler optimization behavior) */ + __ISB(); + + /* Program second word */ + *(__IO uint32_t*)(Address+4U) = (uint32_t)(Data >> 32); +} + +/** + * @brief Fast program a row double-word (64-bit) at a specified address. + * @param Address specifies the address to be programmed. + * @param DataAddress specifies the address where the data are stored. + * @retval None + */ +static void FLASH_Program_Fast(uint32_t Address, uint32_t DataAddress) +{ + uint32_t primask_bit; + uint8_t row_index = (2*FLASH_NB_DOUBLE_WORDS_IN_ROW); + __IO uint32_t *dest_addr = (__IO uint32_t*)Address; + __IO uint32_t *src_addr = (__IO uint32_t*)DataAddress; + + /* Check the parameters */ + assert_param(IS_FLASH_MAIN_MEM_ADDRESS(Address)); + + /* Set FSTPG bit */ + SET_BIT(FLASH->CR, FLASH_CR_FSTPG); + + /* Disable interrupts to avoid any interruption during the loop */ + primask_bit = __get_PRIMASK(); + __disable_irq(); + + /* Program the double word of the row */ + do + { + *dest_addr = *src_addr; + dest_addr++; + src_addr++; + row_index--; + } while (row_index != 0U); + + /* Re-enable the interrupts */ + __set_PRIMASK(primask_bit); +} + +/** + * @} + */ + +#endif /* HAL_FLASH_MODULE_ENABLED */ + +/** + * @} + */ + +/** + * @} + */ + diff --git a/CablePositioning_IAP_V1.0/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ex.c b/CablePositioning_IAP_V1.0/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ex.c index 1689fe5..d9b1205 100644 --- a/CablePositioning_IAP_V1.0/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ex.c +++ b/CablePositioning_IAP_V1.0/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ex.c @@ -1,1316 +1,1316 @@ -/** - ****************************************************************************** - * @file stm32l4xx_hal_flash_ex.c - * @author MCD Application Team - * @brief Extended FLASH HAL module driver. - * This file provides firmware functions to manage the following - * functionalities of the FLASH extended peripheral: - * + Extended programming operations functions - * - @verbatim - ============================================================================== - ##### Flash Extended features ##### - ============================================================================== - - [..] Comparing to other previous devices, the FLASH interface for STM32L4xx - devices contains the following additional features - - (+) Capacity up to 2 Mbyte with dual bank architecture supporting read-while-write - capability (RWW) - (+) Dual bank memory organization - (+) PCROP protection for all banks - - ##### How to use this driver ##### - ============================================================================== - [..] This driver provides functions to configure and program the FLASH memory - of all STM32L4xx devices. It includes - (#) Flash Memory Erase functions: - (++) Lock and Unlock the FLASH interface using HAL_FLASH_Unlock() and - HAL_FLASH_Lock() functions - (++) Erase function: Erase page, erase all sectors - (++) There are two modes of erase : - (+++) Polling Mode using HAL_FLASHEx_Erase() - (+++) Interrupt Mode using HAL_FLASHEx_Erase_IT() - - (#) Option Bytes Programming function: Use HAL_FLASHEx_OBProgram() to : - (++) Set/Reset the write protection - (++) Set the Read protection Level - (++) Program the user Option Bytes - (++) Configure the PCROP protection - - (#) Get Option Bytes Configuration function: Use HAL_FLASHEx_OBGetConfig() to : - (++) Get the value of a write protection area - (++) Know if the read protection is activated - (++) Get the value of the user Option Bytes - (++) Get the value of a PCROP area - - @endverbatim - ****************************************************************************** - * @attention - * - * Copyright (c) 2017 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file in - * the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32l4xx_hal.h" - -/** @addtogroup STM32L4xx_HAL_Driver - * @{ - */ - -/** @defgroup FLASHEx FLASHEx - * @brief FLASH Extended HAL module driver - * @{ - */ - -#ifdef HAL_FLASH_MODULE_ENABLED - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ -/** @defgroup FLASHEx_Private_Functions FLASHEx Private Functions - * @{ - */ -static void FLASH_MassErase(uint32_t Banks); -static HAL_StatusTypeDef FLASH_OB_WRPConfig(uint32_t WRPArea, uint32_t WRPStartOffset, uint32_t WRDPEndOffset); -static HAL_StatusTypeDef FLASH_OB_RDPConfig(uint32_t RDPLevel); -static HAL_StatusTypeDef FLASH_OB_UserConfig(uint32_t UserType, uint32_t UserConfig); -static HAL_StatusTypeDef FLASH_OB_PCROPConfig(uint32_t PCROPConfig, uint32_t PCROPStartAddr, uint32_t PCROPEndAddr); -static void FLASH_OB_GetWRP(uint32_t WRPArea, uint32_t * WRPStartOffset, uint32_t * WRDPEndOffset); -static uint32_t FLASH_OB_GetRDP(void); -static uint32_t FLASH_OB_GetUser(void); -static void FLASH_OB_GetPCROP(uint32_t * PCROPConfig, uint32_t * PCROPStartAddr, uint32_t * PCROPEndAddr); -/** - * @} - */ - -/* Exported functions -------------------------------------------------------*/ -/** @defgroup FLASHEx_Exported_Functions FLASHEx Exported Functions - * @{ - */ - -/** @defgroup FLASHEx_Exported_Functions_Group1 Extended IO operation functions - * @brief Extended IO operation functions - * -@verbatim - =============================================================================== - ##### Extended programming operation functions ##### - =============================================================================== - [..] - This subsection provides a set of functions allowing to manage the Extended FLASH - programming operations Operations. - -@endverbatim - * @{ - */ -/** - * @brief Perform a mass erase or erase the specified FLASH memory pages. - * @param[in] pEraseInit: pointer to an FLASH_EraseInitTypeDef structure that - * contains the configuration information for the erasing. - * - * @param[out] PageError : pointer to variable that contains the configuration - * information on faulty page in case of error (0xFFFFFFFF means that all - * the pages have been correctly erased) - * - * @retval HAL Status - */ -HAL_StatusTypeDef HAL_FLASHEx_Erase(FLASH_EraseInitTypeDef *pEraseInit, uint32_t *PageError) -{ - HAL_StatusTypeDef status; - uint32_t page_index; - - /* Process Locked */ - __HAL_LOCK(&pFlash); - - /* Check the parameters */ - assert_param(IS_FLASH_TYPEERASE(pEraseInit->TypeErase)); - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); - - if (status == HAL_OK) - { - pFlash.ErrorCode = HAL_FLASH_ERROR_NONE; - - /* Deactivate the cache if they are activated to avoid data misbehavior */ - if(READ_BIT(FLASH->ACR, FLASH_ACR_ICEN) != 0U) - { - if(READ_BIT(FLASH->ACR, FLASH_ACR_DCEN) != 0U) - { - /* Disable data cache */ - __HAL_FLASH_DATA_CACHE_DISABLE(); - pFlash.CacheToReactivate = FLASH_CACHE_ICACHE_DCACHE_ENABLED; - } - else - { - pFlash.CacheToReactivate = FLASH_CACHE_ICACHE_ENABLED; - } - } - else if(READ_BIT(FLASH->ACR, FLASH_ACR_DCEN) != 0U) - { - /* Disable data cache */ - __HAL_FLASH_DATA_CACHE_DISABLE(); - pFlash.CacheToReactivate = FLASH_CACHE_DCACHE_ENABLED; - } - else - { - pFlash.CacheToReactivate = FLASH_CACHE_DISABLED; - } - - if (pEraseInit->TypeErase == FLASH_TYPEERASE_MASSERASE) - { - /* Mass erase to be done */ - FLASH_MassErase(pEraseInit->Banks); - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); - -#if defined (STM32L471xx) || defined (STM32L475xx) || defined (STM32L476xx) || defined (STM32L485xx) || defined (STM32L486xx) || \ - defined (STM32L496xx) || defined (STM32L4A6xx) || \ - defined (STM32L4P5xx) || defined (STM32L4Q5xx) || \ - defined (STM32L4R5xx) || defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined (STM32L4S9xx) - /* If the erase operation is completed, disable the MER1 and MER2 Bits */ - CLEAR_BIT(FLASH->CR, (FLASH_CR_MER1 | FLASH_CR_MER2)); -#else - /* If the erase operation is completed, disable the MER1 Bit */ - CLEAR_BIT(FLASH->CR, (FLASH_CR_MER1)); -#endif - } - else - { - /*Initialization of PageError variable*/ - *PageError = 0xFFFFFFFFU; - - for(page_index = pEraseInit->Page; page_index < (pEraseInit->Page + pEraseInit->NbPages); page_index++) - { - FLASH_PageErase(page_index, pEraseInit->Banks); - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); - - /* If the erase operation is completed, disable the PER Bit */ - CLEAR_BIT(FLASH->CR, (FLASH_CR_PER | FLASH_CR_PNB)); - - if (status != HAL_OK) - { - /* In case of error, stop erase procedure and return the faulty address */ - *PageError = page_index; - break; - } - } - } - - /* Flush the caches to be sure of the data consistency */ - FLASH_FlushCaches(); - } - - /* Process Unlocked */ - __HAL_UNLOCK(&pFlash); - - return status; -} - -/** - * @brief Perform a mass erase or erase the specified FLASH memory pages with interrupt enabled. - * @param pEraseInit pointer to an FLASH_EraseInitTypeDef structure that - * contains the configuration information for the erasing. - * - * @retval HAL Status - */ -HAL_StatusTypeDef HAL_FLASHEx_Erase_IT(FLASH_EraseInitTypeDef *pEraseInit) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Process Locked */ - __HAL_LOCK(&pFlash); - - /* Check the parameters */ - assert_param(IS_FLASH_TYPEERASE(pEraseInit->TypeErase)); - - pFlash.ErrorCode = HAL_FLASH_ERROR_NONE; - - /* Deactivate the cache if they are activated to avoid data misbehavior */ - if(READ_BIT(FLASH->ACR, FLASH_ACR_ICEN) != 0U) - { - if(READ_BIT(FLASH->ACR, FLASH_ACR_DCEN) != 0U) - { - /* Disable data cache */ - __HAL_FLASH_DATA_CACHE_DISABLE(); - pFlash.CacheToReactivate = FLASH_CACHE_ICACHE_DCACHE_ENABLED; - } - else - { - pFlash.CacheToReactivate = FLASH_CACHE_ICACHE_ENABLED; - } - } - else if(READ_BIT(FLASH->ACR, FLASH_ACR_DCEN) != 0U) - { - /* Disable data cache */ - __HAL_FLASH_DATA_CACHE_DISABLE(); - pFlash.CacheToReactivate = FLASH_CACHE_DCACHE_ENABLED; - } - else - { - pFlash.CacheToReactivate = FLASH_CACHE_DISABLED; - } - - /* Enable End of Operation and Error interrupts */ - __HAL_FLASH_ENABLE_IT(FLASH_IT_EOP | FLASH_IT_OPERR); - - pFlash.Bank = pEraseInit->Banks; - - if (pEraseInit->TypeErase == FLASH_TYPEERASE_MASSERASE) - { - /* Mass erase to be done */ - pFlash.ProcedureOnGoing = FLASH_PROC_MASS_ERASE; - FLASH_MassErase(pEraseInit->Banks); - } - else - { - /* Erase by page to be done */ - pFlash.ProcedureOnGoing = FLASH_PROC_PAGE_ERASE; - pFlash.NbPagesToErase = pEraseInit->NbPages; - pFlash.Page = pEraseInit->Page; - - /*Erase 1st page and wait for IT */ - FLASH_PageErase(pEraseInit->Page, pEraseInit->Banks); - } - - return status; -} - -/** - * @brief Program Option bytes. - * @param pOBInit pointer to an FLASH_OBInitStruct structure that - * contains the configuration information for the programming. - * - * @retval HAL Status - */ -HAL_StatusTypeDef HAL_FLASHEx_OBProgram(FLASH_OBProgramInitTypeDef *pOBInit) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Process Locked */ - __HAL_LOCK(&pFlash); - - /* Check the parameters */ - assert_param(IS_OPTIONBYTE(pOBInit->OptionType)); - - pFlash.ErrorCode = HAL_FLASH_ERROR_NONE; - - /* Write protection configuration */ - if((pOBInit->OptionType & OPTIONBYTE_WRP) != 0U) - { - /* Configure of Write protection on the selected area */ - if(FLASH_OB_WRPConfig(pOBInit->WRPArea, pOBInit->WRPStartOffset, pOBInit->WRPEndOffset) != HAL_OK) - { - status = HAL_ERROR; - } - - } - - /* Read protection configuration */ - if((pOBInit->OptionType & OPTIONBYTE_RDP) != 0U) - { - /* Configure the Read protection level */ - if(FLASH_OB_RDPConfig(pOBInit->RDPLevel) != HAL_OK) - { - status = HAL_ERROR; - } - } - - /* User Configuration */ - if((pOBInit->OptionType & OPTIONBYTE_USER) != 0U) - { - /* Configure the user option bytes */ - if(FLASH_OB_UserConfig(pOBInit->USERType, pOBInit->USERConfig) != HAL_OK) - { - status = HAL_ERROR; - } - } - - /* PCROP Configuration */ - if((pOBInit->OptionType & OPTIONBYTE_PCROP) != 0U) - { - if (pOBInit->PCROPStartAddr != pOBInit->PCROPEndAddr) - { - /* Configure the Proprietary code readout protection */ - if(FLASH_OB_PCROPConfig(pOBInit->PCROPConfig, pOBInit->PCROPStartAddr, pOBInit->PCROPEndAddr) != HAL_OK) - { - status = HAL_ERROR; - } - } - } - - /* Process Unlocked */ - __HAL_UNLOCK(&pFlash); - - return status; -} - -/** - * @brief Get the Option bytes configuration. - * @param pOBInit pointer to an FLASH_OBInitStruct structure that contains the - * configuration information. - * @note The fields pOBInit->WRPArea and pOBInit->PCROPConfig should indicate - * which area is requested for the WRP and PCROP, else no information will be returned - * - * @retval None - */ -void HAL_FLASHEx_OBGetConfig(FLASH_OBProgramInitTypeDef *pOBInit) -{ - pOBInit->OptionType = (OPTIONBYTE_RDP | OPTIONBYTE_USER); - -#if defined (STM32L471xx) || defined (STM32L475xx) || defined (STM32L476xx) || defined (STM32L485xx) || defined (STM32L486xx) || \ - defined (STM32L496xx) || defined (STM32L4A6xx) || \ - defined (STM32L4P5xx) || defined (STM32L4Q5xx) || \ - defined (STM32L4R5xx) || defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined (STM32L4S9xx) - if((pOBInit->WRPArea == OB_WRPAREA_BANK1_AREAA) || (pOBInit->WRPArea == OB_WRPAREA_BANK1_AREAB) || - (pOBInit->WRPArea == OB_WRPAREA_BANK2_AREAA) || (pOBInit->WRPArea == OB_WRPAREA_BANK2_AREAB)) -#else - if((pOBInit->WRPArea == OB_WRPAREA_BANK1_AREAA) || (pOBInit->WRPArea == OB_WRPAREA_BANK1_AREAB)) -#endif - { - pOBInit->OptionType |= OPTIONBYTE_WRP; - /* Get write protection on the selected area */ - FLASH_OB_GetWRP(pOBInit->WRPArea, &(pOBInit->WRPStartOffset), &(pOBInit->WRPEndOffset)); - } - - /* Get Read protection level */ - pOBInit->RDPLevel = FLASH_OB_GetRDP(); - - /* Get the user option bytes */ - pOBInit->USERConfig = FLASH_OB_GetUser(); - -#if defined (STM32L471xx) || defined (STM32L475xx) || defined (STM32L476xx) || defined (STM32L485xx) || defined (STM32L486xx) || \ - defined (STM32L496xx) || defined (STM32L4A6xx) || \ - defined (STM32L4P5xx) || defined (STM32L4Q5xx) || \ - defined (STM32L4R5xx) || defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined (STM32L4S9xx) - if((pOBInit->PCROPConfig == FLASH_BANK_1) || (pOBInit->PCROPConfig == FLASH_BANK_2)) -#else - if(pOBInit->PCROPConfig == FLASH_BANK_1) -#endif - { - pOBInit->OptionType |= OPTIONBYTE_PCROP; - /* Get the Proprietary code readout protection */ - FLASH_OB_GetPCROP(&(pOBInit->PCROPConfig), &(pOBInit->PCROPStartAddr), &(pOBInit->PCROPEndAddr)); - } -} - -/** - * @} - */ - -#if defined (FLASH_CFGR_LVEN) -/** @defgroup FLASHEx_Exported_Functions_Group2 Extended specific configuration functions - * @brief Extended specific configuration functions - * -@verbatim - =============================================================================== - ##### Extended specific configuration functions ##### - =============================================================================== - [..] - This subsection provides a set of functions allowing to manage the Extended FLASH - specific configurations. - -@endverbatim - * @{ - */ - -/** - * @brief Configuration of the LVE pin of the Flash (managed by power controller - * or forced to low in order to use an external SMPS) - * @param ConfigLVE Configuration of the LVE pin, - * This parameter can be one of the following values: - * @arg FLASH_LVE_PIN_CTRL: LVE FLASH pin controlled by power controller - * @arg FLASH_LVE_PIN_FORCED: LVE FLASH pin enforced to low (external SMPS used) - * - * @note Before enforcing the LVE pin to low, the SOC should be in low voltage - * range 2 and the voltage VDD12 should be higher than 1.08V and SMPS is ON. - * - * @retval HAL Status - */ -HAL_StatusTypeDef HAL_FLASHEx_ConfigLVEPin(uint32_t ConfigLVE) -{ - HAL_StatusTypeDef status; - - /* Process Locked */ - __HAL_LOCK(&pFlash); - - /* Check the parameters */ - assert_param(IS_FLASH_LVE_PIN(ConfigLVE)); - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); - - if (status == HAL_OK) - { - /* Check that the voltage scaling is range 2 */ - if (HAL_PWREx_GetVoltageRange() == PWR_REGULATOR_VOLTAGE_SCALE2) - { - /* Configure the LVEN bit */ - MODIFY_REG(FLASH->CFGR, FLASH_CFGR_LVEN, ConfigLVE); - - /* Check that the bit has been correctly configured */ - if (READ_BIT(FLASH->CFGR, FLASH_CFGR_LVEN) != ConfigLVE) - { - status = HAL_ERROR; - } - } - else - { - /* Not allow to force Flash LVE pin if not in voltage range 2 */ - status = HAL_ERROR; - } - } - - /* Process Unlocked */ - __HAL_UNLOCK(&pFlash); - - return status; -} - -/** - * @} - */ -#endif /* FLASH_CFGR_LVEN */ - -/** - * @} - */ - -/* Private functions ---------------------------------------------------------*/ - -/** @addtogroup FLASHEx_Private_Functions - * @{ - */ -/** - * @brief Mass erase of FLASH memory. - * @param Banks Banks to be erased - * This parameter can be one of the following values: - * @arg FLASH_BANK_1: Bank1 to be erased - * @arg FLASH_BANK_2: Bank2 to be erased - * @arg FLASH_BANK_BOTH: Bank1 and Bank2 to be erased - * @retval None - */ -static void FLASH_MassErase(uint32_t Banks) -{ -#if defined (STM32L4P5xx) || defined (STM32L4Q5xx) || defined (STM32L4R5xx) || defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined (STM32L4S9xx) - if (READ_BIT(FLASH->OPTR, FLASH_OPTR_DBANK) != 0U) -#endif - { - /* Check the parameters */ - assert_param(IS_FLASH_BANK(Banks)); - - /* Set the Mass Erase Bit for the bank 1 if requested */ - if((Banks & FLASH_BANK_1) != 0U) - { - SET_BIT(FLASH->CR, FLASH_CR_MER1); - } - -#if defined (STM32L471xx) || defined (STM32L475xx) || defined (STM32L476xx) || defined (STM32L485xx) || defined (STM32L486xx) || \ - defined (STM32L496xx) || defined (STM32L4A6xx) || \ - defined (STM32L4P5xx) || defined (STM32L4Q5xx) || \ - defined (STM32L4R5xx) || defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined (STM32L4S9xx) - /* Set the Mass Erase Bit for the bank 2 if requested */ - if((Banks & FLASH_BANK_2) != 0U) - { - SET_BIT(FLASH->CR, FLASH_CR_MER2); - } -#endif - } -#if defined (STM32L4P5xx) || defined (STM32L4Q5xx) || defined (STM32L4R5xx) || defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined (STM32L4S9xx) - else - { - SET_BIT(FLASH->CR, (FLASH_CR_MER1 | FLASH_CR_MER2)); - } -#endif - - /* Proceed to erase all sectors */ - SET_BIT(FLASH->CR, FLASH_CR_STRT); -} - -/** - * @brief Erase the specified FLASH memory page. - * @param Page FLASH page to erase - * This parameter must be a value between 0 and (max number of pages in the bank - 1) - * @param Banks Bank(s) where the page will be erased - * This parameter can be one of the following values: - * @arg FLASH_BANK_1: Page in bank 1 to be erased - * @arg FLASH_BANK_2: Page in bank 2 to be erased - * @retval None - */ -void FLASH_PageErase(uint32_t Page, uint32_t Banks) -{ - /* Check the parameters */ - assert_param(IS_FLASH_PAGE(Page)); - -#if defined (STM32L471xx) || defined (STM32L475xx) || defined (STM32L476xx) || defined (STM32L485xx) || defined (STM32L486xx) || \ - defined (STM32L496xx) || defined (STM32L4A6xx) || \ - defined (STM32L4P5xx) || defined (STM32L4Q5xx) || \ - defined (STM32L4R5xx) || defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined (STM32L4S9xx) -#if defined (STM32L4P5xx) || defined (STM32L4Q5xx) || defined (STM32L4R5xx) || defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined (STM32L4S9xx) - if(READ_BIT(FLASH->OPTR, FLASH_OPTR_DBANK) == 0U) - { - CLEAR_BIT(FLASH->CR, FLASH_CR_BKER); - } - else -#endif - { - assert_param(IS_FLASH_BANK_EXCLUSIVE(Banks)); - - if((Banks & FLASH_BANK_1) != 0U) - { - CLEAR_BIT(FLASH->CR, FLASH_CR_BKER); - } - else - { - SET_BIT(FLASH->CR, FLASH_CR_BKER); - } - } -#else - /* Prevent unused argument(s) compilation warning */ - UNUSED(Banks); -#endif - - /* Proceed to erase the page */ - MODIFY_REG(FLASH->CR, FLASH_CR_PNB, ((Page & 0xFFU) << FLASH_CR_PNB_Pos)); - SET_BIT(FLASH->CR, FLASH_CR_PER); - SET_BIT(FLASH->CR, FLASH_CR_STRT); -} - -/** - * @brief Flush the instruction and data caches. - * @retval None - */ -void FLASH_FlushCaches(void) -{ - FLASH_CacheTypeDef cache = pFlash.CacheToReactivate; - - /* Flush instruction cache */ - if((cache == FLASH_CACHE_ICACHE_ENABLED) || - (cache == FLASH_CACHE_ICACHE_DCACHE_ENABLED)) - { - /* Disable instruction cache */ - __HAL_FLASH_INSTRUCTION_CACHE_DISABLE(); - /* Reset instruction cache */ - __HAL_FLASH_INSTRUCTION_CACHE_RESET(); - /* Enable instruction cache */ - __HAL_FLASH_INSTRUCTION_CACHE_ENABLE(); - } - - /* Flush data cache */ - if((cache == FLASH_CACHE_DCACHE_ENABLED) || - (cache == FLASH_CACHE_ICACHE_DCACHE_ENABLED)) - { - /* Reset data cache */ - __HAL_FLASH_DATA_CACHE_RESET(); - /* Enable data cache */ - __HAL_FLASH_DATA_CACHE_ENABLE(); - } - - /* Reset internal variable */ - pFlash.CacheToReactivate = FLASH_CACHE_DISABLED; -} - -/** - * @brief Configure the write protection of the desired pages. - * - * @note When the memory read protection level is selected (RDP level = 1), - * it is not possible to program or erase Flash memory if the CPU debug - * features are connected (JTAG or single wire) or boot code is being - * executed from RAM or System flash, even if WRP is not activated. - * @note To configure the WRP options, the option lock bit OPTLOCK must be - * cleared with the call of the HAL_FLASH_OB_Unlock() function. - * @note To validate the WRP options, the option bytes must be reloaded - * through the call of the HAL_FLASH_OB_Launch() function. - * - * @param WRPArea specifies the area to be configured. - * This parameter can be one of the following values: - * @arg OB_WRPAREA_BANK1_AREAA: Flash Bank 1 Area A - * @arg OB_WRPAREA_BANK1_AREAB: Flash Bank 1 Area B - * @arg OB_WRPAREA_BANK2_AREAA: Flash Bank 2 Area A (don't apply for STM32L43x/STM32L44x devices) - * @arg OB_WRPAREA_BANK2_AREAB: Flash Bank 2 Area B (don't apply for STM32L43x/STM32L44x devices) - * - * @param WRPStartOffset specifies the start page of the write protected area - * This parameter can be page number between 0 and (max number of pages in the bank - 1) - * - * @param WRDPEndOffset specifies the end page of the write protected area - * This parameter can be page number between WRPStartOffset and (max number of pages in the bank - 1) - * - * @retval HAL Status - */ -static HAL_StatusTypeDef FLASH_OB_WRPConfig(uint32_t WRPArea, uint32_t WRPStartOffset, uint32_t WRDPEndOffset) -{ - HAL_StatusTypeDef status; - - /* Check the parameters */ - assert_param(IS_OB_WRPAREA(WRPArea)); - assert_param(IS_FLASH_PAGE(WRPStartOffset)); - assert_param(IS_FLASH_PAGE(WRDPEndOffset)); - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); - - if(status == HAL_OK) - { - /* Configure the write protected area */ - if(WRPArea == OB_WRPAREA_BANK1_AREAA) - { - MODIFY_REG(FLASH->WRP1AR, (FLASH_WRP1AR_WRP1A_STRT | FLASH_WRP1AR_WRP1A_END), - (WRPStartOffset | (WRDPEndOffset << 16))); - } - else if(WRPArea == OB_WRPAREA_BANK1_AREAB) - { - MODIFY_REG(FLASH->WRP1BR, (FLASH_WRP1BR_WRP1B_STRT | FLASH_WRP1BR_WRP1B_END), - (WRPStartOffset | (WRDPEndOffset << 16))); - } -#if defined (STM32L471xx) || defined (STM32L475xx) || defined (STM32L476xx) || defined (STM32L485xx) || defined (STM32L486xx) || \ - defined (STM32L496xx) || defined (STM32L4A6xx) || \ - defined (STM32L4P5xx) || defined (STM32L4Q5xx) || \ - defined (STM32L4R5xx) || defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined (STM32L4S9xx) - else if(WRPArea == OB_WRPAREA_BANK2_AREAA) - { - MODIFY_REG(FLASH->WRP2AR, (FLASH_WRP2AR_WRP2A_STRT | FLASH_WRP2AR_WRP2A_END), - (WRPStartOffset | (WRDPEndOffset << 16))); - } - else if(WRPArea == OB_WRPAREA_BANK2_AREAB) - { - MODIFY_REG(FLASH->WRP2BR, (FLASH_WRP2BR_WRP2B_STRT | FLASH_WRP2BR_WRP2B_END), - (WRPStartOffset | (WRDPEndOffset << 16))); - } -#endif - else - { - /* Nothing to do */ - } - - /* Set OPTSTRT Bit */ - SET_BIT(FLASH->CR, FLASH_CR_OPTSTRT); - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); - - /* If the option byte program operation is completed, disable the OPTSTRT Bit */ - CLEAR_BIT(FLASH->CR, FLASH_CR_OPTSTRT); - } - - return status; -} - -/** - * @brief Set the read protection level. - * - * @note To configure the RDP level, the option lock bit OPTLOCK must be - * cleared with the call of the HAL_FLASH_OB_Unlock() function. - * @note To validate the RDP level, the option bytes must be reloaded - * through the call of the HAL_FLASH_OB_Launch() function. - * @note !!! Warning : When enabling OB_RDP level 2 it's no more possible - * to go back to level 1 or 0 !!! - * - * @param RDPLevel specifies the read protection level. - * This parameter can be one of the following values: - * @arg OB_RDP_LEVEL_0: No protection - * @arg OB_RDP_LEVEL_1: Read protection of the memory - * @arg OB_RDP_LEVEL_2: Full chip protection - * - * @retval HAL status - */ -static HAL_StatusTypeDef FLASH_OB_RDPConfig(uint32_t RDPLevel) -{ - HAL_StatusTypeDef status; - - /* Check the parameters */ - assert_param(IS_OB_RDP_LEVEL(RDPLevel)); - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); - - if(status == HAL_OK) - { - /* Configure the RDP level in the option bytes register */ - MODIFY_REG(FLASH->OPTR, FLASH_OPTR_RDP, RDPLevel); - - /* Set OPTSTRT Bit */ - SET_BIT(FLASH->CR, FLASH_CR_OPTSTRT); - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); - - /* If the option byte program operation is completed, disable the OPTSTRT Bit */ - CLEAR_BIT(FLASH->CR, FLASH_CR_OPTSTRT); - } - - return status; -} - -/** - * @brief Program the FLASH User Option Byte. - * - * @note To configure the user option bytes, the option lock bit OPTLOCK must - * be cleared with the call of the HAL_FLASH_OB_Unlock() function. - * @note To validate the user option bytes, the option bytes must be reloaded - * through the call of the HAL_FLASH_OB_Launch() function. - * - * @param UserType The FLASH User Option Bytes to be modified - * @param UserConfig The FLASH User Option Bytes values: - * BOR_LEV(Bit8-10), nRST_STOP(Bit12), nRST_STDBY(Bit13), IWDG_SW(Bit16), - * IWDG_STOP(Bit17), IWDG_STDBY(Bit18), WWDG_SW(Bit19), BFB2(Bit20), - * DUALBANK(Bit21), nBOOT1(Bit23), SRAM2_PE(Bit24) and SRAM2_RST(Bit25). - * - * @retval HAL status - */ -static HAL_StatusTypeDef FLASH_OB_UserConfig(uint32_t UserType, uint32_t UserConfig) -{ - uint32_t optr_reg_val = 0; - uint32_t optr_reg_mask = 0; - HAL_StatusTypeDef status; - - /* Check the parameters */ - assert_param(IS_OB_USER_TYPE(UserType)); - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); - - if(status == HAL_OK) - { - if((UserType & OB_USER_BOR_LEV) != 0U) - { - /* BOR level option byte should be modified */ - assert_param(IS_OB_USER_BOR_LEVEL(UserConfig & FLASH_OPTR_BOR_LEV)); - - /* Set value and mask for BOR level option byte */ - optr_reg_val |= (UserConfig & FLASH_OPTR_BOR_LEV); - optr_reg_mask |= FLASH_OPTR_BOR_LEV; - } - - if((UserType & OB_USER_nRST_STOP) != 0U) - { - /* nRST_STOP option byte should be modified */ - assert_param(IS_OB_USER_STOP(UserConfig & FLASH_OPTR_nRST_STOP)); - - /* Set value and mask for nRST_STOP option byte */ - optr_reg_val |= (UserConfig & FLASH_OPTR_nRST_STOP); - optr_reg_mask |= FLASH_OPTR_nRST_STOP; - } - - if((UserType & OB_USER_nRST_STDBY) != 0U) - { - /* nRST_STDBY option byte should be modified */ - assert_param(IS_OB_USER_STANDBY(UserConfig & FLASH_OPTR_nRST_STDBY)); - - /* Set value and mask for nRST_STDBY option byte */ - optr_reg_val |= (UserConfig & FLASH_OPTR_nRST_STDBY); - optr_reg_mask |= FLASH_OPTR_nRST_STDBY; - } - - if((UserType & OB_USER_nRST_SHDW) != 0U) - { - /* nRST_SHDW option byte should be modified */ - assert_param(IS_OB_USER_SHUTDOWN(UserConfig & FLASH_OPTR_nRST_SHDW)); - - /* Set value and mask for nRST_SHDW option byte */ - optr_reg_val |= (UserConfig & FLASH_OPTR_nRST_SHDW); - optr_reg_mask |= FLASH_OPTR_nRST_SHDW; - } - - if((UserType & OB_USER_IWDG_SW) != 0U) - { - /* IWDG_SW option byte should be modified */ - assert_param(IS_OB_USER_IWDG(UserConfig & FLASH_OPTR_IWDG_SW)); - - /* Set value and mask for IWDG_SW option byte */ - optr_reg_val |= (UserConfig & FLASH_OPTR_IWDG_SW); - optr_reg_mask |= FLASH_OPTR_IWDG_SW; - } - - if((UserType & OB_USER_IWDG_STOP) != 0U) - { - /* IWDG_STOP option byte should be modified */ - assert_param(IS_OB_USER_IWDG_STOP(UserConfig & FLASH_OPTR_IWDG_STOP)); - - /* Set value and mask for IWDG_STOP option byte */ - optr_reg_val |= (UserConfig & FLASH_OPTR_IWDG_STOP); - optr_reg_mask |= FLASH_OPTR_IWDG_STOP; - } - - if((UserType & OB_USER_IWDG_STDBY) != 0U) - { - /* IWDG_STDBY option byte should be modified */ - assert_param(IS_OB_USER_IWDG_STDBY(UserConfig & FLASH_OPTR_IWDG_STDBY)); - - /* Set value and mask for IWDG_STDBY option byte */ - optr_reg_val |= (UserConfig & FLASH_OPTR_IWDG_STDBY); - optr_reg_mask |= FLASH_OPTR_IWDG_STDBY; - } - - if((UserType & OB_USER_WWDG_SW) != 0U) - { - /* WWDG_SW option byte should be modified */ - assert_param(IS_OB_USER_WWDG(UserConfig & FLASH_OPTR_WWDG_SW)); - - /* Set value and mask for WWDG_SW option byte */ - optr_reg_val |= (UserConfig & FLASH_OPTR_WWDG_SW); - optr_reg_mask |= FLASH_OPTR_WWDG_SW; - } - -#if defined (STM32L471xx) || defined (STM32L475xx) || defined (STM32L476xx) || defined (STM32L485xx) || defined (STM32L486xx) || \ - defined (STM32L496xx) || defined (STM32L4A6xx) || \ - defined (STM32L4P5xx) || defined (STM32L4Q5xx) || \ - defined (STM32L4R5xx) || defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined (STM32L4S9xx) - if((UserType & OB_USER_BFB2) != 0U) - { - /* BFB2 option byte should be modified */ - assert_param(IS_OB_USER_BFB2(UserConfig & FLASH_OPTR_BFB2)); - - /* Set value and mask for BFB2 option byte */ - optr_reg_val |= (UserConfig & FLASH_OPTR_BFB2); - optr_reg_mask |= FLASH_OPTR_BFB2; - } - - if((UserType & OB_USER_DUALBANK) != 0U) - { -#if defined (STM32L4P5xx) || defined (STM32L4Q5xx) || defined (STM32L4R5xx) || defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined (STM32L4S9xx) - /* DUALBANK option byte should be modified */ - assert_param(IS_OB_USER_DUALBANK(UserConfig & FLASH_OPTR_DB1M)); - - /* Set value and mask for DUALBANK option byte */ - optr_reg_val |= (UserConfig & FLASH_OPTR_DB1M); - optr_reg_mask |= FLASH_OPTR_DB1M; -#else - /* DUALBANK option byte should be modified */ - assert_param(IS_OB_USER_DUALBANK(UserConfig & FLASH_OPTR_DUALBANK)); - - /* Set value and mask for DUALBANK option byte */ - optr_reg_val |= (UserConfig & FLASH_OPTR_DUALBANK); - optr_reg_mask |= FLASH_OPTR_DUALBANK; -#endif - } -#endif - - if((UserType & OB_USER_nBOOT1) != 0U) - { - /* nBOOT1 option byte should be modified */ - assert_param(IS_OB_USER_BOOT1(UserConfig & FLASH_OPTR_nBOOT1)); - - /* Set value and mask for nBOOT1 option byte */ - optr_reg_val |= (UserConfig & FLASH_OPTR_nBOOT1); - optr_reg_mask |= FLASH_OPTR_nBOOT1; - } - - if((UserType & OB_USER_SRAM2_PE) != 0U) - { - /* SRAM2_PE option byte should be modified */ - assert_param(IS_OB_USER_SRAM2_PARITY(UserConfig & FLASH_OPTR_SRAM2_PE)); - - /* Set value and mask for SRAM2_PE option byte */ - optr_reg_val |= (UserConfig & FLASH_OPTR_SRAM2_PE); - optr_reg_mask |= FLASH_OPTR_SRAM2_PE; - } - - if((UserType & OB_USER_SRAM2_RST) != 0U) - { - /* SRAM2_RST option byte should be modified */ - assert_param(IS_OB_USER_SRAM2_RST(UserConfig & FLASH_OPTR_SRAM2_RST)); - - /* Set value and mask for SRAM2_RST option byte */ - optr_reg_val |= (UserConfig & FLASH_OPTR_SRAM2_RST); - optr_reg_mask |= FLASH_OPTR_SRAM2_RST; - } - -#if defined (STM32L412xx) || defined (STM32L422xx) || defined (STM32L431xx) || defined (STM32L432xx) || defined (STM32L433xx) || \ - defined (STM32L442xx) || defined (STM32L443xx) || defined (STM32L451xx) || defined (STM32L452xx) || defined (STM32L462xx) || \ - defined (STM32L496xx) || defined (STM32L4A6xx) || \ - defined (STM32L4P5xx) || defined (STM32L4Q5xx) || \ - defined (STM32L4R5xx) || defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined (STM32L4S9xx) - if((UserType & OB_USER_nSWBOOT0) != 0U) - { - /* nSWBOOT0 option byte should be modified */ - assert_param(IS_OB_USER_SWBOOT0(UserConfig & FLASH_OPTR_nSWBOOT0)); - - /* Set value and mask for nSWBOOT0 option byte */ - optr_reg_val |= (UserConfig & FLASH_OPTR_nSWBOOT0); - optr_reg_mask |= FLASH_OPTR_nSWBOOT0; - } - - if((UserType & OB_USER_nBOOT0) != 0U) - { - /* nBOOT0 option byte should be modified */ - assert_param(IS_OB_USER_BOOT0(UserConfig & FLASH_OPTR_nBOOT0)); - - /* Set value and mask for nBOOT0 option byte */ - optr_reg_val |= (UserConfig & FLASH_OPTR_nBOOT0); - optr_reg_mask |= FLASH_OPTR_nBOOT0; - } -#endif - - /* Configure the option bytes register */ - MODIFY_REG(FLASH->OPTR, optr_reg_mask, optr_reg_val); - - /* Set OPTSTRT Bit */ - SET_BIT(FLASH->CR, FLASH_CR_OPTSTRT); - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); - - /* If the option byte program operation is completed, disable the OPTSTRT Bit */ - CLEAR_BIT(FLASH->CR, FLASH_CR_OPTSTRT); - } - - return status; -} - -/** - * @brief Configure the Proprietary code readout protection of the desired addresses. - * - * @note To configure the PCROP options, the option lock bit OPTLOCK must be - * cleared with the call of the HAL_FLASH_OB_Unlock() function. - * @note To validate the PCROP options, the option bytes must be reloaded - * through the call of the HAL_FLASH_OB_Launch() function. - * - * @param PCROPConfig specifies the configuration (Bank to be configured and PCROP_RDP option). - * This parameter must be a combination of FLASH_BANK_1 or FLASH_BANK_2 - * with OB_PCROP_RDP_NOT_ERASE or OB_PCROP_RDP_ERASE - * - * @param PCROPStartAddr specifies the start address of the Proprietary code readout protection - * This parameter can be an address between begin and end of the bank - * - * @param PCROPEndAddr specifies the end address of the Proprietary code readout protection - * This parameter can be an address between PCROPStartAddr and end of the bank - * - * @retval HAL Status - */ -static HAL_StatusTypeDef FLASH_OB_PCROPConfig(uint32_t PCROPConfig, uint32_t PCROPStartAddr, uint32_t PCROPEndAddr) -{ - HAL_StatusTypeDef status; - uint32_t reg_value; - uint32_t bank1_addr; -#if defined (STM32L471xx) || defined (STM32L475xx) || defined (STM32L476xx) || defined (STM32L485xx) || defined (STM32L486xx) || \ - defined (STM32L496xx) || defined (STM32L4A6xx) || \ - defined (STM32L4P5xx) || defined (STM32L4Q5xx) || \ - defined (STM32L4R5xx) || defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined (STM32L4S9xx) - uint32_t bank2_addr; -#endif - - /* Check the parameters */ - assert_param(IS_FLASH_BANK_EXCLUSIVE(PCROPConfig & FLASH_BANK_BOTH)); - assert_param(IS_OB_PCROP_RDP(PCROPConfig & FLASH_PCROP1ER_PCROP_RDP)); - assert_param(IS_FLASH_MAIN_MEM_ADDRESS(PCROPStartAddr)); - assert_param(IS_FLASH_MAIN_MEM_ADDRESS(PCROPEndAddr)); - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); - - if(status == HAL_OK) - { -#if defined (STM32L471xx) || defined (STM32L475xx) || defined (STM32L476xx) || defined (STM32L485xx) || defined (STM32L486xx) || \ - defined (STM32L496xx) || defined (STM32L4A6xx) || \ - defined (STM32L4P5xx) || defined (STM32L4Q5xx) || \ - defined (STM32L4R5xx) || defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined (STM32L4S9xx) - /* Get the information about the bank swapping */ - if (READ_BIT(SYSCFG->MEMRMP, SYSCFG_MEMRMP_FB_MODE) == 0U) - { - bank1_addr = FLASH_BASE; - bank2_addr = FLASH_BASE + FLASH_BANK_SIZE; - } - else - { - bank1_addr = FLASH_BASE + FLASH_BANK_SIZE; - bank2_addr = FLASH_BASE; - } -#else - bank1_addr = FLASH_BASE; -#endif - -#if defined (STM32L4P5xx) || defined (STM32L4Q5xx) || defined (STM32L4R5xx) || defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined (STM32L4S9xx) - if (READ_BIT(FLASH->OPTR, FLASH_OPTR_DBANK) == 0U) - { - /* Configure the Proprietary code readout protection */ - if((PCROPConfig & FLASH_BANK_BOTH) == FLASH_BANK_1) - { - reg_value = ((PCROPStartAddr - FLASH_BASE) >> 4); - MODIFY_REG(FLASH->PCROP1SR, FLASH_PCROP1SR_PCROP1_STRT, reg_value); - - reg_value = ((PCROPEndAddr - FLASH_BASE) >> 4); - MODIFY_REG(FLASH->PCROP1ER, FLASH_PCROP1ER_PCROP1_END, reg_value); - } - else if((PCROPConfig & FLASH_BANK_BOTH) == FLASH_BANK_2) - { - reg_value = ((PCROPStartAddr - FLASH_BASE) >> 4); - MODIFY_REG(FLASH->PCROP2SR, FLASH_PCROP2SR_PCROP2_STRT, reg_value); - - reg_value = ((PCROPEndAddr - FLASH_BASE) >> 4); - MODIFY_REG(FLASH->PCROP2ER, FLASH_PCROP2ER_PCROP2_END, reg_value); - } - else - { - /* Nothing to do */ - } - } - else -#endif - { - /* Configure the Proprietary code readout protection */ - if((PCROPConfig & FLASH_BANK_BOTH) == FLASH_BANK_1) - { - reg_value = ((PCROPStartAddr - bank1_addr) >> 3); - MODIFY_REG(FLASH->PCROP1SR, FLASH_PCROP1SR_PCROP1_STRT, reg_value); - - reg_value = ((PCROPEndAddr - bank1_addr) >> 3); - MODIFY_REG(FLASH->PCROP1ER, FLASH_PCROP1ER_PCROP1_END, reg_value); - } -#if defined (STM32L471xx) || defined (STM32L475xx) || defined (STM32L476xx) || defined (STM32L485xx) || defined (STM32L486xx) || \ - defined (STM32L496xx) || defined (STM32L4A6xx) || \ - defined (STM32L4P5xx) || defined (STM32L4Q5xx) || \ - defined (STM32L4R5xx) || defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined (STM32L4S9xx) - else if((PCROPConfig & FLASH_BANK_BOTH) == FLASH_BANK_2) - { - reg_value = ((PCROPStartAddr - bank2_addr) >> 3); - MODIFY_REG(FLASH->PCROP2SR, FLASH_PCROP2SR_PCROP2_STRT, reg_value); - - reg_value = ((PCROPEndAddr - bank2_addr) >> 3); - MODIFY_REG(FLASH->PCROP2ER, FLASH_PCROP2ER_PCROP2_END, reg_value); - } -#endif - else - { - /* Nothing to do */ - } - } - - MODIFY_REG(FLASH->PCROP1ER, FLASH_PCROP1ER_PCROP_RDP, (PCROPConfig & FLASH_PCROP1ER_PCROP_RDP)); - - /* Set OPTSTRT Bit */ - SET_BIT(FLASH->CR, FLASH_CR_OPTSTRT); - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); - - /* If the option byte program operation is completed, disable the OPTSTRT Bit */ - CLEAR_BIT(FLASH->CR, FLASH_CR_OPTSTRT); - } - - return status; -} - -/** - * @brief Return the FLASH Write Protection Option Bytes value. - * - * @param[in] WRPArea: specifies the area to be returned. - * This parameter can be one of the following values: - * @arg OB_WRPAREA_BANK1_AREAA: Flash Bank 1 Area A - * @arg OB_WRPAREA_BANK1_AREAB: Flash Bank 1 Area B - * @arg OB_WRPAREA_BANK2_AREAA: Flash Bank 2 Area A (don't apply to STM32L43x/STM32L44x devices) - * @arg OB_WRPAREA_BANK2_AREAB: Flash Bank 2 Area B (don't apply to STM32L43x/STM32L44x devices) - * - * @param[out] WRPStartOffset: specifies the address where to copied the start page - * of the write protected area - * - * @param[out] WRDPEndOffset: specifies the address where to copied the end page of - * the write protected area - * - * @retval None - */ -static void FLASH_OB_GetWRP(uint32_t WRPArea, uint32_t * WRPStartOffset, uint32_t * WRDPEndOffset) -{ - /* Get the configuration of the write protected area */ - if(WRPArea == OB_WRPAREA_BANK1_AREAA) - { - *WRPStartOffset = READ_BIT(FLASH->WRP1AR, FLASH_WRP1AR_WRP1A_STRT); - *WRDPEndOffset = (READ_BIT(FLASH->WRP1AR, FLASH_WRP1AR_WRP1A_END) >> 16); - } - else if(WRPArea == OB_WRPAREA_BANK1_AREAB) - { - *WRPStartOffset = READ_BIT(FLASH->WRP1BR, FLASH_WRP1BR_WRP1B_STRT); - *WRDPEndOffset = (READ_BIT(FLASH->WRP1BR, FLASH_WRP1BR_WRP1B_END) >> 16); - } -#if defined (STM32L471xx) || defined (STM32L475xx) || defined (STM32L476xx) || defined (STM32L485xx) || defined (STM32L486xx) || \ - defined (STM32L496xx) || defined (STM32L4A6xx) || \ - defined (STM32L4P5xx) || defined (STM32L4Q5xx) || \ - defined (STM32L4R5xx) || defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined (STM32L4S9xx) - else if(WRPArea == OB_WRPAREA_BANK2_AREAA) - { - *WRPStartOffset = READ_BIT(FLASH->WRP2AR, FLASH_WRP2AR_WRP2A_STRT); - *WRDPEndOffset = (READ_BIT(FLASH->WRP2AR, FLASH_WRP2AR_WRP2A_END) >> 16); - } - else if(WRPArea == OB_WRPAREA_BANK2_AREAB) - { - *WRPStartOffset = READ_BIT(FLASH->WRP2BR, FLASH_WRP2BR_WRP2B_STRT); - *WRDPEndOffset = (READ_BIT(FLASH->WRP2BR, FLASH_WRP2BR_WRP2B_END) >> 16); - } -#endif - else - { - /* Nothing to do */ - } -} - -/** - * @brief Return the FLASH Read Protection level. - * @retval FLASH ReadOut Protection Status: - * This return value can be one of the following values: - * @arg OB_RDP_LEVEL_0: No protection - * @arg OB_RDP_LEVEL_1: Read protection of the memory - * @arg OB_RDP_LEVEL_2: Full chip protection - */ -static uint32_t FLASH_OB_GetRDP(void) -{ - uint32_t rdp_level = READ_BIT(FLASH->OPTR, FLASH_OPTR_RDP); - - if ((rdp_level != OB_RDP_LEVEL_0) && (rdp_level != OB_RDP_LEVEL_2)) - { - return (OB_RDP_LEVEL_1); - } - else - { - return (READ_BIT(FLASH->OPTR, FLASH_OPTR_RDP)); - } -} - -/** - * @brief Return the FLASH User Option Byte value. - * @retval The FLASH User Option Bytes values: - * For STM32L47x/STM32L48x devices : - * BOR_LEV(Bit8-10), nRST_STOP(Bit12), nRST_STDBY(Bit13), nRST_SHDW(Bit14), - * IWDG_SW(Bit16), IWDG_STOP(Bit17), IWDG_STDBY(Bit18), WWDG_SW(Bit19), - * BFB2(Bit20), DUALBANK(Bit21), nBOOT1(Bit23), SRAM2_PE(Bit24) and SRAM2_RST(Bit25). - * For STM32L43x/STM32L44x devices : - * BOR_LEV(Bit8-10), nRST_STOP(Bit12), nRST_STDBY(Bit13), nRST_SHDW(Bit14), - * IWDG_SW(Bit16), IWDG_STOP(Bit17), IWDG_STDBY(Bit18), WWDG_SW(Bit19), - * nBOOT1(Bit23), SRAM2_PE(Bit24), SRAM2_RST(Bit25), nSWBOOT0(Bit26) and nBOOT0(Bit27). - */ -static uint32_t FLASH_OB_GetUser(void) -{ - uint32_t user_config = READ_REG(FLASH->OPTR); - CLEAR_BIT(user_config, FLASH_OPTR_RDP); - - return user_config; -} - -/** - * @brief Return the FLASH Write Protection Option Bytes value. - * - * @param PCROPConfig [inout]: specifies the configuration (Bank to be configured and PCROP_RDP option). - * This parameter must be a combination of FLASH_BANK_1 or FLASH_BANK_2 - * with OB_PCROP_RDP_NOT_ERASE or OB_PCROP_RDP_ERASE - * - * @param PCROPStartAddr [out]: specifies the address where to copied the start address - * of the Proprietary code readout protection - * - * @param PCROPEndAddr [out]: specifies the address where to copied the end address of - * the Proprietary code readout protection - * - * @retval None - */ -static void FLASH_OB_GetPCROP(uint32_t * PCROPConfig, uint32_t * PCROPStartAddr, uint32_t * PCROPEndAddr) -{ - uint32_t reg_value; - uint32_t bank1_addr; -#if defined (STM32L471xx) || defined (STM32L475xx) || defined (STM32L476xx) || defined (STM32L485xx) || defined (STM32L486xx) || \ - defined (STM32L496xx) || defined (STM32L4A6xx) || \ - defined (STM32L4P5xx) || defined (STM32L4Q5xx) || \ - defined (STM32L4R5xx) || defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined (STM32L4S9xx) - uint32_t bank2_addr; -#endif - -#if defined (STM32L471xx) || defined (STM32L475xx) || defined (STM32L476xx) || defined (STM32L485xx) || defined (STM32L486xx) || \ - defined (STM32L496xx) || defined (STM32L4A6xx) || \ - defined (STM32L4P5xx) || defined (STM32L4Q5xx) || \ - defined (STM32L4R5xx) || defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined (STM32L4S9xx) - /* Get the information about the bank swapping */ - if (READ_BIT(SYSCFG->MEMRMP, SYSCFG_MEMRMP_FB_MODE) == 0U) - { - bank1_addr = FLASH_BASE; - bank2_addr = FLASH_BASE + FLASH_BANK_SIZE; - } - else - { - bank1_addr = FLASH_BASE + FLASH_BANK_SIZE; - bank2_addr = FLASH_BASE; - } -#else - bank1_addr = FLASH_BASE; -#endif - -#if defined (STM32L4P5xx) || defined (STM32L4Q5xx) || defined (STM32L4R5xx) || defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined (STM32L4S9xx) - if (READ_BIT(FLASH->OPTR, FLASH_OPTR_DBANK) == 0U) - { - if(((*PCROPConfig) & FLASH_BANK_BOTH) == FLASH_BANK_1) - { - reg_value = (READ_REG(FLASH->PCROP1SR) & FLASH_PCROP1SR_PCROP1_STRT); - *PCROPStartAddr = (reg_value << 4) + FLASH_BASE; - - reg_value = (READ_REG(FLASH->PCROP1ER) & FLASH_PCROP1ER_PCROP1_END); - *PCROPEndAddr = (reg_value << 4) + FLASH_BASE + 0xFU; - } - else if(((*PCROPConfig) & FLASH_BANK_BOTH) == FLASH_BANK_2) - { - reg_value = (READ_REG(FLASH->PCROP2SR) & FLASH_PCROP2SR_PCROP2_STRT); - *PCROPStartAddr = (reg_value << 4) + FLASH_BASE; - - reg_value = (READ_REG(FLASH->PCROP2ER) & FLASH_PCROP2ER_PCROP2_END); - *PCROPEndAddr = (reg_value << 4) + FLASH_BASE + 0xFU;; - } - else - { - /* Nothing to do */ - } - } - else -#endif - { - if(((*PCROPConfig) & FLASH_BANK_BOTH) == FLASH_BANK_1) - { - reg_value = (READ_REG(FLASH->PCROP1SR) & FLASH_PCROP1SR_PCROP1_STRT); - *PCROPStartAddr = (reg_value << 3) + bank1_addr; - - reg_value = (READ_REG(FLASH->PCROP1ER) & FLASH_PCROP1ER_PCROP1_END); - *PCROPEndAddr = (reg_value << 3) + bank1_addr + 0x7U; - } -#if defined (STM32L471xx) || defined (STM32L475xx) || defined (STM32L476xx) || defined (STM32L485xx) || defined (STM32L486xx) || \ - defined (STM32L496xx) || defined (STM32L4A6xx) || \ - defined (STM32L4P5xx) || defined (STM32L4Q5xx) || \ - defined (STM32L4R5xx) || defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined (STM32L4S9xx) - else if(((*PCROPConfig) & FLASH_BANK_BOTH) == FLASH_BANK_2) - { - reg_value = (READ_REG(FLASH->PCROP2SR) & FLASH_PCROP2SR_PCROP2_STRT); - *PCROPStartAddr = (reg_value << 3) + bank2_addr; - - reg_value = (READ_REG(FLASH->PCROP2ER) & FLASH_PCROP2ER_PCROP2_END); - *PCROPEndAddr = (reg_value << 3) + bank2_addr + 0x7U; - } -#endif - else - { - /* Nothing to do */ - } - } - - *PCROPConfig |= (READ_REG(FLASH->PCROP1ER) & FLASH_PCROP1ER_PCROP_RDP); -} -/** - * @} - */ - -/** - * @} - */ - -#endif /* HAL_FLASH_MODULE_ENABLED */ - -/** - * @} - */ - -/** - * @} - */ - +/** + ****************************************************************************** + * @file stm32l4xx_hal_flash_ex.c + * @author MCD Application Team + * @brief Extended FLASH HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the FLASH extended peripheral: + * + Extended programming operations functions + * + @verbatim + ============================================================================== + ##### Flash Extended features ##### + ============================================================================== + + [..] Comparing to other previous devices, the FLASH interface for STM32L4xx + devices contains the following additional features + + (+) Capacity up to 2 Mbyte with dual bank architecture supporting read-while-write + capability (RWW) + (+) Dual bank memory organization + (+) PCROP protection for all banks + + ##### How to use this driver ##### + ============================================================================== + [..] This driver provides functions to configure and program the FLASH memory + of all STM32L4xx devices. It includes + (#) Flash Memory Erase functions: + (++) Lock and Unlock the FLASH interface using HAL_FLASH_Unlock() and + HAL_FLASH_Lock() functions + (++) Erase function: Erase page, erase all sectors + (++) There are two modes of erase : + (+++) Polling Mode using HAL_FLASHEx_Erase() + (+++) Interrupt Mode using HAL_FLASHEx_Erase_IT() + + (#) Option Bytes Programming function: Use HAL_FLASHEx_OBProgram() to : + (++) Set/Reset the write protection + (++) Set the Read protection Level + (++) Program the user Option Bytes + (++) Configure the PCROP protection + + (#) Get Option Bytes Configuration function: Use HAL_FLASHEx_OBGetConfig() to : + (++) Get the value of a write protection area + (++) Know if the read protection is activated + (++) Get the value of the user Option Bytes + (++) Get the value of a PCROP area + + @endverbatim + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file in + * the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l4xx_hal.h" + +/** @addtogroup STM32L4xx_HAL_Driver + * @{ + */ + +/** @defgroup FLASHEx FLASHEx + * @brief FLASH Extended HAL module driver + * @{ + */ + +#ifdef HAL_FLASH_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/** @defgroup FLASHEx_Private_Functions FLASHEx Private Functions + * @{ + */ +static void FLASH_MassErase(uint32_t Banks); +static HAL_StatusTypeDef FLASH_OB_WRPConfig(uint32_t WRPArea, uint32_t WRPStartOffset, uint32_t WRDPEndOffset); +static HAL_StatusTypeDef FLASH_OB_RDPConfig(uint32_t RDPLevel); +static HAL_StatusTypeDef FLASH_OB_UserConfig(uint32_t UserType, uint32_t UserConfig); +static HAL_StatusTypeDef FLASH_OB_PCROPConfig(uint32_t PCROPConfig, uint32_t PCROPStartAddr, uint32_t PCROPEndAddr); +static void FLASH_OB_GetWRP(uint32_t WRPArea, uint32_t * WRPStartOffset, uint32_t * WRDPEndOffset); +static uint32_t FLASH_OB_GetRDP(void); +static uint32_t FLASH_OB_GetUser(void); +static void FLASH_OB_GetPCROP(uint32_t * PCROPConfig, uint32_t * PCROPStartAddr, uint32_t * PCROPEndAddr); +/** + * @} + */ + +/* Exported functions -------------------------------------------------------*/ +/** @defgroup FLASHEx_Exported_Functions FLASHEx Exported Functions + * @{ + */ + +/** @defgroup FLASHEx_Exported_Functions_Group1 Extended IO operation functions + * @brief Extended IO operation functions + * +@verbatim + =============================================================================== + ##### Extended programming operation functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to manage the Extended FLASH + programming operations Operations. + +@endverbatim + * @{ + */ +/** + * @brief Perform a mass erase or erase the specified FLASH memory pages. + * @param[in] pEraseInit: pointer to an FLASH_EraseInitTypeDef structure that + * contains the configuration information for the erasing. + * + * @param[out] PageError : pointer to variable that contains the configuration + * information on faulty page in case of error (0xFFFFFFFF means that all + * the pages have been correctly erased) + * + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_FLASHEx_Erase(FLASH_EraseInitTypeDef *pEraseInit, uint32_t *PageError) +{ + HAL_StatusTypeDef status; + uint32_t page_index; + + /* Process Locked */ + __HAL_LOCK(&pFlash); + + /* Check the parameters */ + assert_param(IS_FLASH_TYPEERASE(pEraseInit->TypeErase)); + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); + + if (status == HAL_OK) + { + pFlash.ErrorCode = HAL_FLASH_ERROR_NONE; + + /* Deactivate the cache if they are activated to avoid data misbehavior */ + if(READ_BIT(FLASH->ACR, FLASH_ACR_ICEN) != 0U) + { + if(READ_BIT(FLASH->ACR, FLASH_ACR_DCEN) != 0U) + { + /* Disable data cache */ + __HAL_FLASH_DATA_CACHE_DISABLE(); + pFlash.CacheToReactivate = FLASH_CACHE_ICACHE_DCACHE_ENABLED; + } + else + { + pFlash.CacheToReactivate = FLASH_CACHE_ICACHE_ENABLED; + } + } + else if(READ_BIT(FLASH->ACR, FLASH_ACR_DCEN) != 0U) + { + /* Disable data cache */ + __HAL_FLASH_DATA_CACHE_DISABLE(); + pFlash.CacheToReactivate = FLASH_CACHE_DCACHE_ENABLED; + } + else + { + pFlash.CacheToReactivate = FLASH_CACHE_DISABLED; + } + + if (pEraseInit->TypeErase == FLASH_TYPEERASE_MASSERASE) + { + /* Mass erase to be done */ + FLASH_MassErase(pEraseInit->Banks); + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); + +#if defined (STM32L471xx) || defined (STM32L475xx) || defined (STM32L476xx) || defined (STM32L485xx) || defined (STM32L486xx) || \ + defined (STM32L496xx) || defined (STM32L4A6xx) || \ + defined (STM32L4P5xx) || defined (STM32L4Q5xx) || \ + defined (STM32L4R5xx) || defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined (STM32L4S9xx) + /* If the erase operation is completed, disable the MER1 and MER2 Bits */ + CLEAR_BIT(FLASH->CR, (FLASH_CR_MER1 | FLASH_CR_MER2)); +#else + /* If the erase operation is completed, disable the MER1 Bit */ + CLEAR_BIT(FLASH->CR, (FLASH_CR_MER1)); +#endif + } + else + { + /*Initialization of PageError variable*/ + *PageError = 0xFFFFFFFFU; + + for(page_index = pEraseInit->Page; page_index < (pEraseInit->Page + pEraseInit->NbPages); page_index++) + { + FLASH_PageErase(page_index, pEraseInit->Banks); + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); + + /* If the erase operation is completed, disable the PER Bit */ + CLEAR_BIT(FLASH->CR, (FLASH_CR_PER | FLASH_CR_PNB)); + + if (status != HAL_OK) + { + /* In case of error, stop erase procedure and return the faulty address */ + *PageError = page_index; + break; + } + } + } + + /* Flush the caches to be sure of the data consistency */ + FLASH_FlushCaches(); + } + + /* Process Unlocked */ + __HAL_UNLOCK(&pFlash); + + return status; +} + +/** + * @brief Perform a mass erase or erase the specified FLASH memory pages with interrupt enabled. + * @param pEraseInit pointer to an FLASH_EraseInitTypeDef structure that + * contains the configuration information for the erasing. + * + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_FLASHEx_Erase_IT(FLASH_EraseInitTypeDef *pEraseInit) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process Locked */ + __HAL_LOCK(&pFlash); + + /* Check the parameters */ + assert_param(IS_FLASH_TYPEERASE(pEraseInit->TypeErase)); + + pFlash.ErrorCode = HAL_FLASH_ERROR_NONE; + + /* Deactivate the cache if they are activated to avoid data misbehavior */ + if(READ_BIT(FLASH->ACR, FLASH_ACR_ICEN) != 0U) + { + if(READ_BIT(FLASH->ACR, FLASH_ACR_DCEN) != 0U) + { + /* Disable data cache */ + __HAL_FLASH_DATA_CACHE_DISABLE(); + pFlash.CacheToReactivate = FLASH_CACHE_ICACHE_DCACHE_ENABLED; + } + else + { + pFlash.CacheToReactivate = FLASH_CACHE_ICACHE_ENABLED; + } + } + else if(READ_BIT(FLASH->ACR, FLASH_ACR_DCEN) != 0U) + { + /* Disable data cache */ + __HAL_FLASH_DATA_CACHE_DISABLE(); + pFlash.CacheToReactivate = FLASH_CACHE_DCACHE_ENABLED; + } + else + { + pFlash.CacheToReactivate = FLASH_CACHE_DISABLED; + } + + /* Enable End of Operation and Error interrupts */ + __HAL_FLASH_ENABLE_IT(FLASH_IT_EOP | FLASH_IT_OPERR); + + pFlash.Bank = pEraseInit->Banks; + + if (pEraseInit->TypeErase == FLASH_TYPEERASE_MASSERASE) + { + /* Mass erase to be done */ + pFlash.ProcedureOnGoing = FLASH_PROC_MASS_ERASE; + FLASH_MassErase(pEraseInit->Banks); + } + else + { + /* Erase by page to be done */ + pFlash.ProcedureOnGoing = FLASH_PROC_PAGE_ERASE; + pFlash.NbPagesToErase = pEraseInit->NbPages; + pFlash.Page = pEraseInit->Page; + + /*Erase 1st page and wait for IT */ + FLASH_PageErase(pEraseInit->Page, pEraseInit->Banks); + } + + return status; +} + +/** + * @brief Program Option bytes. + * @param pOBInit pointer to an FLASH_OBInitStruct structure that + * contains the configuration information for the programming. + * + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_FLASHEx_OBProgram(FLASH_OBProgramInitTypeDef *pOBInit) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process Locked */ + __HAL_LOCK(&pFlash); + + /* Check the parameters */ + assert_param(IS_OPTIONBYTE(pOBInit->OptionType)); + + pFlash.ErrorCode = HAL_FLASH_ERROR_NONE; + + /* Write protection configuration */ + if((pOBInit->OptionType & OPTIONBYTE_WRP) != 0U) + { + /* Configure of Write protection on the selected area */ + if(FLASH_OB_WRPConfig(pOBInit->WRPArea, pOBInit->WRPStartOffset, pOBInit->WRPEndOffset) != HAL_OK) + { + status = HAL_ERROR; + } + + } + + /* Read protection configuration */ + if((pOBInit->OptionType & OPTIONBYTE_RDP) != 0U) + { + /* Configure the Read protection level */ + if(FLASH_OB_RDPConfig(pOBInit->RDPLevel) != HAL_OK) + { + status = HAL_ERROR; + } + } + + /* User Configuration */ + if((pOBInit->OptionType & OPTIONBYTE_USER) != 0U) + { + /* Configure the user option bytes */ + if(FLASH_OB_UserConfig(pOBInit->USERType, pOBInit->USERConfig) != HAL_OK) + { + status = HAL_ERROR; + } + } + + /* PCROP Configuration */ + if((pOBInit->OptionType & OPTIONBYTE_PCROP) != 0U) + { + if (pOBInit->PCROPStartAddr != pOBInit->PCROPEndAddr) + { + /* Configure the Proprietary code readout protection */ + if(FLASH_OB_PCROPConfig(pOBInit->PCROPConfig, pOBInit->PCROPStartAddr, pOBInit->PCROPEndAddr) != HAL_OK) + { + status = HAL_ERROR; + } + } + } + + /* Process Unlocked */ + __HAL_UNLOCK(&pFlash); + + return status; +} + +/** + * @brief Get the Option bytes configuration. + * @param pOBInit pointer to an FLASH_OBInitStruct structure that contains the + * configuration information. + * @note The fields pOBInit->WRPArea and pOBInit->PCROPConfig should indicate + * which area is requested for the WRP and PCROP, else no information will be returned + * + * @retval None + */ +void HAL_FLASHEx_OBGetConfig(FLASH_OBProgramInitTypeDef *pOBInit) +{ + pOBInit->OptionType = (OPTIONBYTE_RDP | OPTIONBYTE_USER); + +#if defined (STM32L471xx) || defined (STM32L475xx) || defined (STM32L476xx) || defined (STM32L485xx) || defined (STM32L486xx) || \ + defined (STM32L496xx) || defined (STM32L4A6xx) || \ + defined (STM32L4P5xx) || defined (STM32L4Q5xx) || \ + defined (STM32L4R5xx) || defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined (STM32L4S9xx) + if((pOBInit->WRPArea == OB_WRPAREA_BANK1_AREAA) || (pOBInit->WRPArea == OB_WRPAREA_BANK1_AREAB) || + (pOBInit->WRPArea == OB_WRPAREA_BANK2_AREAA) || (pOBInit->WRPArea == OB_WRPAREA_BANK2_AREAB)) +#else + if((pOBInit->WRPArea == OB_WRPAREA_BANK1_AREAA) || (pOBInit->WRPArea == OB_WRPAREA_BANK1_AREAB)) +#endif + { + pOBInit->OptionType |= OPTIONBYTE_WRP; + /* Get write protection on the selected area */ + FLASH_OB_GetWRP(pOBInit->WRPArea, &(pOBInit->WRPStartOffset), &(pOBInit->WRPEndOffset)); + } + + /* Get Read protection level */ + pOBInit->RDPLevel = FLASH_OB_GetRDP(); + + /* Get the user option bytes */ + pOBInit->USERConfig = FLASH_OB_GetUser(); + +#if defined (STM32L471xx) || defined (STM32L475xx) || defined (STM32L476xx) || defined (STM32L485xx) || defined (STM32L486xx) || \ + defined (STM32L496xx) || defined (STM32L4A6xx) || \ + defined (STM32L4P5xx) || defined (STM32L4Q5xx) || \ + defined (STM32L4R5xx) || defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined (STM32L4S9xx) + if((pOBInit->PCROPConfig == FLASH_BANK_1) || (pOBInit->PCROPConfig == FLASH_BANK_2)) +#else + if(pOBInit->PCROPConfig == FLASH_BANK_1) +#endif + { + pOBInit->OptionType |= OPTIONBYTE_PCROP; + /* Get the Proprietary code readout protection */ + FLASH_OB_GetPCROP(&(pOBInit->PCROPConfig), &(pOBInit->PCROPStartAddr), &(pOBInit->PCROPEndAddr)); + } +} + +/** + * @} + */ + +#if defined (FLASH_CFGR_LVEN) +/** @defgroup FLASHEx_Exported_Functions_Group2 Extended specific configuration functions + * @brief Extended specific configuration functions + * +@verbatim + =============================================================================== + ##### Extended specific configuration functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to manage the Extended FLASH + specific configurations. + +@endverbatim + * @{ + */ + +/** + * @brief Configuration of the LVE pin of the Flash (managed by power controller + * or forced to low in order to use an external SMPS) + * @param ConfigLVE Configuration of the LVE pin, + * This parameter can be one of the following values: + * @arg FLASH_LVE_PIN_CTRL: LVE FLASH pin controlled by power controller + * @arg FLASH_LVE_PIN_FORCED: LVE FLASH pin enforced to low (external SMPS used) + * + * @note Before enforcing the LVE pin to low, the SOC should be in low voltage + * range 2 and the voltage VDD12 should be higher than 1.08V and SMPS is ON. + * + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_FLASHEx_ConfigLVEPin(uint32_t ConfigLVE) +{ + HAL_StatusTypeDef status; + + /* Process Locked */ + __HAL_LOCK(&pFlash); + + /* Check the parameters */ + assert_param(IS_FLASH_LVE_PIN(ConfigLVE)); + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); + + if (status == HAL_OK) + { + /* Check that the voltage scaling is range 2 */ + if (HAL_PWREx_GetVoltageRange() == PWR_REGULATOR_VOLTAGE_SCALE2) + { + /* Configure the LVEN bit */ + MODIFY_REG(FLASH->CFGR, FLASH_CFGR_LVEN, ConfigLVE); + + /* Check that the bit has been correctly configured */ + if (READ_BIT(FLASH->CFGR, FLASH_CFGR_LVEN) != ConfigLVE) + { + status = HAL_ERROR; + } + } + else + { + /* Not allow to force Flash LVE pin if not in voltage range 2 */ + status = HAL_ERROR; + } + } + + /* Process Unlocked */ + __HAL_UNLOCK(&pFlash); + + return status; +} + +/** + * @} + */ +#endif /* FLASH_CFGR_LVEN */ + +/** + * @} + */ + +/* Private functions ---------------------------------------------------------*/ + +/** @addtogroup FLASHEx_Private_Functions + * @{ + */ +/** + * @brief Mass erase of FLASH memory. + * @param Banks Banks to be erased + * This parameter can be one of the following values: + * @arg FLASH_BANK_1: Bank1 to be erased + * @arg FLASH_BANK_2: Bank2 to be erased + * @arg FLASH_BANK_BOTH: Bank1 and Bank2 to be erased + * @retval None + */ +static void FLASH_MassErase(uint32_t Banks) +{ +#if defined (STM32L4P5xx) || defined (STM32L4Q5xx) || defined (STM32L4R5xx) || defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined (STM32L4S9xx) + if (READ_BIT(FLASH->OPTR, FLASH_OPTR_DBANK) != 0U) +#endif + { + /* Check the parameters */ + assert_param(IS_FLASH_BANK(Banks)); + + /* Set the Mass Erase Bit for the bank 1 if requested */ + if((Banks & FLASH_BANK_1) != 0U) + { + SET_BIT(FLASH->CR, FLASH_CR_MER1); + } + +#if defined (STM32L471xx) || defined (STM32L475xx) || defined (STM32L476xx) || defined (STM32L485xx) || defined (STM32L486xx) || \ + defined (STM32L496xx) || defined (STM32L4A6xx) || \ + defined (STM32L4P5xx) || defined (STM32L4Q5xx) || \ + defined (STM32L4R5xx) || defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined (STM32L4S9xx) + /* Set the Mass Erase Bit for the bank 2 if requested */ + if((Banks & FLASH_BANK_2) != 0U) + { + SET_BIT(FLASH->CR, FLASH_CR_MER2); + } +#endif + } +#if defined (STM32L4P5xx) || defined (STM32L4Q5xx) || defined (STM32L4R5xx) || defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined (STM32L4S9xx) + else + { + SET_BIT(FLASH->CR, (FLASH_CR_MER1 | FLASH_CR_MER2)); + } +#endif + + /* Proceed to erase all sectors */ + SET_BIT(FLASH->CR, FLASH_CR_STRT); +} + +/** + * @brief Erase the specified FLASH memory page. + * @param Page FLASH page to erase + * This parameter must be a value between 0 and (max number of pages in the bank - 1) + * @param Banks Bank(s) where the page will be erased + * This parameter can be one of the following values: + * @arg FLASH_BANK_1: Page in bank 1 to be erased + * @arg FLASH_BANK_2: Page in bank 2 to be erased + * @retval None + */ +void FLASH_PageErase(uint32_t Page, uint32_t Banks) +{ + /* Check the parameters */ + assert_param(IS_FLASH_PAGE(Page)); + +#if defined (STM32L471xx) || defined (STM32L475xx) || defined (STM32L476xx) || defined (STM32L485xx) || defined (STM32L486xx) || \ + defined (STM32L496xx) || defined (STM32L4A6xx) || \ + defined (STM32L4P5xx) || defined (STM32L4Q5xx) || \ + defined (STM32L4R5xx) || defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined (STM32L4S9xx) +#if defined (STM32L4P5xx) || defined (STM32L4Q5xx) || defined (STM32L4R5xx) || defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined (STM32L4S9xx) + if(READ_BIT(FLASH->OPTR, FLASH_OPTR_DBANK) == 0U) + { + CLEAR_BIT(FLASH->CR, FLASH_CR_BKER); + } + else +#endif + { + assert_param(IS_FLASH_BANK_EXCLUSIVE(Banks)); + + if((Banks & FLASH_BANK_1) != 0U) + { + CLEAR_BIT(FLASH->CR, FLASH_CR_BKER); + } + else + { + SET_BIT(FLASH->CR, FLASH_CR_BKER); + } + } +#else + /* Prevent unused argument(s) compilation warning */ + UNUSED(Banks); +#endif + + /* Proceed to erase the page */ + MODIFY_REG(FLASH->CR, FLASH_CR_PNB, ((Page & 0xFFU) << FLASH_CR_PNB_Pos)); + SET_BIT(FLASH->CR, FLASH_CR_PER); + SET_BIT(FLASH->CR, FLASH_CR_STRT); +} + +/** + * @brief Flush the instruction and data caches. + * @retval None + */ +void FLASH_FlushCaches(void) +{ + FLASH_CacheTypeDef cache = pFlash.CacheToReactivate; + + /* Flush instruction cache */ + if((cache == FLASH_CACHE_ICACHE_ENABLED) || + (cache == FLASH_CACHE_ICACHE_DCACHE_ENABLED)) + { + /* Disable instruction cache */ + __HAL_FLASH_INSTRUCTION_CACHE_DISABLE(); + /* Reset instruction cache */ + __HAL_FLASH_INSTRUCTION_CACHE_RESET(); + /* Enable instruction cache */ + __HAL_FLASH_INSTRUCTION_CACHE_ENABLE(); + } + + /* Flush data cache */ + if((cache == FLASH_CACHE_DCACHE_ENABLED) || + (cache == FLASH_CACHE_ICACHE_DCACHE_ENABLED)) + { + /* Reset data cache */ + __HAL_FLASH_DATA_CACHE_RESET(); + /* Enable data cache */ + __HAL_FLASH_DATA_CACHE_ENABLE(); + } + + /* Reset internal variable */ + pFlash.CacheToReactivate = FLASH_CACHE_DISABLED; +} + +/** + * @brief Configure the write protection of the desired pages. + * + * @note When the memory read protection level is selected (RDP level = 1), + * it is not possible to program or erase Flash memory if the CPU debug + * features are connected (JTAG or single wire) or boot code is being + * executed from RAM or System flash, even if WRP is not activated. + * @note To configure the WRP options, the option lock bit OPTLOCK must be + * cleared with the call of the HAL_FLASH_OB_Unlock() function. + * @note To validate the WRP options, the option bytes must be reloaded + * through the call of the HAL_FLASH_OB_Launch() function. + * + * @param WRPArea specifies the area to be configured. + * This parameter can be one of the following values: + * @arg OB_WRPAREA_BANK1_AREAA: Flash Bank 1 Area A + * @arg OB_WRPAREA_BANK1_AREAB: Flash Bank 1 Area B + * @arg OB_WRPAREA_BANK2_AREAA: Flash Bank 2 Area A (don't apply for STM32L43x/STM32L44x devices) + * @arg OB_WRPAREA_BANK2_AREAB: Flash Bank 2 Area B (don't apply for STM32L43x/STM32L44x devices) + * + * @param WRPStartOffset specifies the start page of the write protected area + * This parameter can be page number between 0 and (max number of pages in the bank - 1) + * + * @param WRDPEndOffset specifies the end page of the write protected area + * This parameter can be page number between WRPStartOffset and (max number of pages in the bank - 1) + * + * @retval HAL Status + */ +static HAL_StatusTypeDef FLASH_OB_WRPConfig(uint32_t WRPArea, uint32_t WRPStartOffset, uint32_t WRDPEndOffset) +{ + HAL_StatusTypeDef status; + + /* Check the parameters */ + assert_param(IS_OB_WRPAREA(WRPArea)); + assert_param(IS_FLASH_PAGE(WRPStartOffset)); + assert_param(IS_FLASH_PAGE(WRDPEndOffset)); + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); + + if(status == HAL_OK) + { + /* Configure the write protected area */ + if(WRPArea == OB_WRPAREA_BANK1_AREAA) + { + MODIFY_REG(FLASH->WRP1AR, (FLASH_WRP1AR_WRP1A_STRT | FLASH_WRP1AR_WRP1A_END), + (WRPStartOffset | (WRDPEndOffset << 16))); + } + else if(WRPArea == OB_WRPAREA_BANK1_AREAB) + { + MODIFY_REG(FLASH->WRP1BR, (FLASH_WRP1BR_WRP1B_STRT | FLASH_WRP1BR_WRP1B_END), + (WRPStartOffset | (WRDPEndOffset << 16))); + } +#if defined (STM32L471xx) || defined (STM32L475xx) || defined (STM32L476xx) || defined (STM32L485xx) || defined (STM32L486xx) || \ + defined (STM32L496xx) || defined (STM32L4A6xx) || \ + defined (STM32L4P5xx) || defined (STM32L4Q5xx) || \ + defined (STM32L4R5xx) || defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined (STM32L4S9xx) + else if(WRPArea == OB_WRPAREA_BANK2_AREAA) + { + MODIFY_REG(FLASH->WRP2AR, (FLASH_WRP2AR_WRP2A_STRT | FLASH_WRP2AR_WRP2A_END), + (WRPStartOffset | (WRDPEndOffset << 16))); + } + else if(WRPArea == OB_WRPAREA_BANK2_AREAB) + { + MODIFY_REG(FLASH->WRP2BR, (FLASH_WRP2BR_WRP2B_STRT | FLASH_WRP2BR_WRP2B_END), + (WRPStartOffset | (WRDPEndOffset << 16))); + } +#endif + else + { + /* Nothing to do */ + } + + /* Set OPTSTRT Bit */ + SET_BIT(FLASH->CR, FLASH_CR_OPTSTRT); + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); + + /* If the option byte program operation is completed, disable the OPTSTRT Bit */ + CLEAR_BIT(FLASH->CR, FLASH_CR_OPTSTRT); + } + + return status; +} + +/** + * @brief Set the read protection level. + * + * @note To configure the RDP level, the option lock bit OPTLOCK must be + * cleared with the call of the HAL_FLASH_OB_Unlock() function. + * @note To validate the RDP level, the option bytes must be reloaded + * through the call of the HAL_FLASH_OB_Launch() function. + * @note !!! Warning : When enabling OB_RDP level 2 it's no more possible + * to go back to level 1 or 0 !!! + * + * @param RDPLevel specifies the read protection level. + * This parameter can be one of the following values: + * @arg OB_RDP_LEVEL_0: No protection + * @arg OB_RDP_LEVEL_1: Read protection of the memory + * @arg OB_RDP_LEVEL_2: Full chip protection + * + * @retval HAL status + */ +static HAL_StatusTypeDef FLASH_OB_RDPConfig(uint32_t RDPLevel) +{ + HAL_StatusTypeDef status; + + /* Check the parameters */ + assert_param(IS_OB_RDP_LEVEL(RDPLevel)); + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); + + if(status == HAL_OK) + { + /* Configure the RDP level in the option bytes register */ + MODIFY_REG(FLASH->OPTR, FLASH_OPTR_RDP, RDPLevel); + + /* Set OPTSTRT Bit */ + SET_BIT(FLASH->CR, FLASH_CR_OPTSTRT); + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); + + /* If the option byte program operation is completed, disable the OPTSTRT Bit */ + CLEAR_BIT(FLASH->CR, FLASH_CR_OPTSTRT); + } + + return status; +} + +/** + * @brief Program the FLASH User Option Byte. + * + * @note To configure the user option bytes, the option lock bit OPTLOCK must + * be cleared with the call of the HAL_FLASH_OB_Unlock() function. + * @note To validate the user option bytes, the option bytes must be reloaded + * through the call of the HAL_FLASH_OB_Launch() function. + * + * @param UserType The FLASH User Option Bytes to be modified + * @param UserConfig The FLASH User Option Bytes values: + * BOR_LEV(Bit8-10), nRST_STOP(Bit12), nRST_STDBY(Bit13), IWDG_SW(Bit16), + * IWDG_STOP(Bit17), IWDG_STDBY(Bit18), WWDG_SW(Bit19), BFB2(Bit20), + * DUALBANK(Bit21), nBOOT1(Bit23), SRAM2_PE(Bit24) and SRAM2_RST(Bit25). + * + * @retval HAL status + */ +static HAL_StatusTypeDef FLASH_OB_UserConfig(uint32_t UserType, uint32_t UserConfig) +{ + uint32_t optr_reg_val = 0; + uint32_t optr_reg_mask = 0; + HAL_StatusTypeDef status; + + /* Check the parameters */ + assert_param(IS_OB_USER_TYPE(UserType)); + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); + + if(status == HAL_OK) + { + if((UserType & OB_USER_BOR_LEV) != 0U) + { + /* BOR level option byte should be modified */ + assert_param(IS_OB_USER_BOR_LEVEL(UserConfig & FLASH_OPTR_BOR_LEV)); + + /* Set value and mask for BOR level option byte */ + optr_reg_val |= (UserConfig & FLASH_OPTR_BOR_LEV); + optr_reg_mask |= FLASH_OPTR_BOR_LEV; + } + + if((UserType & OB_USER_nRST_STOP) != 0U) + { + /* nRST_STOP option byte should be modified */ + assert_param(IS_OB_USER_STOP(UserConfig & FLASH_OPTR_nRST_STOP)); + + /* Set value and mask for nRST_STOP option byte */ + optr_reg_val |= (UserConfig & FLASH_OPTR_nRST_STOP); + optr_reg_mask |= FLASH_OPTR_nRST_STOP; + } + + if((UserType & OB_USER_nRST_STDBY) != 0U) + { + /* nRST_STDBY option byte should be modified */ + assert_param(IS_OB_USER_STANDBY(UserConfig & FLASH_OPTR_nRST_STDBY)); + + /* Set value and mask for nRST_STDBY option byte */ + optr_reg_val |= (UserConfig & FLASH_OPTR_nRST_STDBY); + optr_reg_mask |= FLASH_OPTR_nRST_STDBY; + } + + if((UserType & OB_USER_nRST_SHDW) != 0U) + { + /* nRST_SHDW option byte should be modified */ + assert_param(IS_OB_USER_SHUTDOWN(UserConfig & FLASH_OPTR_nRST_SHDW)); + + /* Set value and mask for nRST_SHDW option byte */ + optr_reg_val |= (UserConfig & FLASH_OPTR_nRST_SHDW); + optr_reg_mask |= FLASH_OPTR_nRST_SHDW; + } + + if((UserType & OB_USER_IWDG_SW) != 0U) + { + /* IWDG_SW option byte should be modified */ + assert_param(IS_OB_USER_IWDG(UserConfig & FLASH_OPTR_IWDG_SW)); + + /* Set value and mask for IWDG_SW option byte */ + optr_reg_val |= (UserConfig & FLASH_OPTR_IWDG_SW); + optr_reg_mask |= FLASH_OPTR_IWDG_SW; + } + + if((UserType & OB_USER_IWDG_STOP) != 0U) + { + /* IWDG_STOP option byte should be modified */ + assert_param(IS_OB_USER_IWDG_STOP(UserConfig & FLASH_OPTR_IWDG_STOP)); + + /* Set value and mask for IWDG_STOP option byte */ + optr_reg_val |= (UserConfig & FLASH_OPTR_IWDG_STOP); + optr_reg_mask |= FLASH_OPTR_IWDG_STOP; + } + + if((UserType & OB_USER_IWDG_STDBY) != 0U) + { + /* IWDG_STDBY option byte should be modified */ + assert_param(IS_OB_USER_IWDG_STDBY(UserConfig & FLASH_OPTR_IWDG_STDBY)); + + /* Set value and mask for IWDG_STDBY option byte */ + optr_reg_val |= (UserConfig & FLASH_OPTR_IWDG_STDBY); + optr_reg_mask |= FLASH_OPTR_IWDG_STDBY; + } + + if((UserType & OB_USER_WWDG_SW) != 0U) + { + /* WWDG_SW option byte should be modified */ + assert_param(IS_OB_USER_WWDG(UserConfig & FLASH_OPTR_WWDG_SW)); + + /* Set value and mask for WWDG_SW option byte */ + optr_reg_val |= (UserConfig & FLASH_OPTR_WWDG_SW); + optr_reg_mask |= FLASH_OPTR_WWDG_SW; + } + +#if defined (STM32L471xx) || defined (STM32L475xx) || defined (STM32L476xx) || defined (STM32L485xx) || defined (STM32L486xx) || \ + defined (STM32L496xx) || defined (STM32L4A6xx) || \ + defined (STM32L4P5xx) || defined (STM32L4Q5xx) || \ + defined (STM32L4R5xx) || defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined (STM32L4S9xx) + if((UserType & OB_USER_BFB2) != 0U) + { + /* BFB2 option byte should be modified */ + assert_param(IS_OB_USER_BFB2(UserConfig & FLASH_OPTR_BFB2)); + + /* Set value and mask for BFB2 option byte */ + optr_reg_val |= (UserConfig & FLASH_OPTR_BFB2); + optr_reg_mask |= FLASH_OPTR_BFB2; + } + + if((UserType & OB_USER_DUALBANK) != 0U) + { +#if defined (STM32L4P5xx) || defined (STM32L4Q5xx) || defined (STM32L4R5xx) || defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined (STM32L4S9xx) + /* DUALBANK option byte should be modified */ + assert_param(IS_OB_USER_DUALBANK(UserConfig & FLASH_OPTR_DB1M)); + + /* Set value and mask for DUALBANK option byte */ + optr_reg_val |= (UserConfig & FLASH_OPTR_DB1M); + optr_reg_mask |= FLASH_OPTR_DB1M; +#else + /* DUALBANK option byte should be modified */ + assert_param(IS_OB_USER_DUALBANK(UserConfig & FLASH_OPTR_DUALBANK)); + + /* Set value and mask for DUALBANK option byte */ + optr_reg_val |= (UserConfig & FLASH_OPTR_DUALBANK); + optr_reg_mask |= FLASH_OPTR_DUALBANK; +#endif + } +#endif + + if((UserType & OB_USER_nBOOT1) != 0U) + { + /* nBOOT1 option byte should be modified */ + assert_param(IS_OB_USER_BOOT1(UserConfig & FLASH_OPTR_nBOOT1)); + + /* Set value and mask for nBOOT1 option byte */ + optr_reg_val |= (UserConfig & FLASH_OPTR_nBOOT1); + optr_reg_mask |= FLASH_OPTR_nBOOT1; + } + + if((UserType & OB_USER_SRAM2_PE) != 0U) + { + /* SRAM2_PE option byte should be modified */ + assert_param(IS_OB_USER_SRAM2_PARITY(UserConfig & FLASH_OPTR_SRAM2_PE)); + + /* Set value and mask for SRAM2_PE option byte */ + optr_reg_val |= (UserConfig & FLASH_OPTR_SRAM2_PE); + optr_reg_mask |= FLASH_OPTR_SRAM2_PE; + } + + if((UserType & OB_USER_SRAM2_RST) != 0U) + { + /* SRAM2_RST option byte should be modified */ + assert_param(IS_OB_USER_SRAM2_RST(UserConfig & FLASH_OPTR_SRAM2_RST)); + + /* Set value and mask for SRAM2_RST option byte */ + optr_reg_val |= (UserConfig & FLASH_OPTR_SRAM2_RST); + optr_reg_mask |= FLASH_OPTR_SRAM2_RST; + } + +#if defined (STM32L412xx) || defined (STM32L422xx) || defined (STM32L431xx) || defined (STM32L432xx) || defined (STM32L433xx) || \ + defined (STM32L442xx) || defined (STM32L443xx) || defined (STM32L451xx) || defined (STM32L452xx) || defined (STM32L462xx) || \ + defined (STM32L496xx) || defined (STM32L4A6xx) || \ + defined (STM32L4P5xx) || defined (STM32L4Q5xx) || \ + defined (STM32L4R5xx) || defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined (STM32L4S9xx) + if((UserType & OB_USER_nSWBOOT0) != 0U) + { + /* nSWBOOT0 option byte should be modified */ + assert_param(IS_OB_USER_SWBOOT0(UserConfig & FLASH_OPTR_nSWBOOT0)); + + /* Set value and mask for nSWBOOT0 option byte */ + optr_reg_val |= (UserConfig & FLASH_OPTR_nSWBOOT0); + optr_reg_mask |= FLASH_OPTR_nSWBOOT0; + } + + if((UserType & OB_USER_nBOOT0) != 0U) + { + /* nBOOT0 option byte should be modified */ + assert_param(IS_OB_USER_BOOT0(UserConfig & FLASH_OPTR_nBOOT0)); + + /* Set value and mask for nBOOT0 option byte */ + optr_reg_val |= (UserConfig & FLASH_OPTR_nBOOT0); + optr_reg_mask |= FLASH_OPTR_nBOOT0; + } +#endif + + /* Configure the option bytes register */ + MODIFY_REG(FLASH->OPTR, optr_reg_mask, optr_reg_val); + + /* Set OPTSTRT Bit */ + SET_BIT(FLASH->CR, FLASH_CR_OPTSTRT); + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); + + /* If the option byte program operation is completed, disable the OPTSTRT Bit */ + CLEAR_BIT(FLASH->CR, FLASH_CR_OPTSTRT); + } + + return status; +} + +/** + * @brief Configure the Proprietary code readout protection of the desired addresses. + * + * @note To configure the PCROP options, the option lock bit OPTLOCK must be + * cleared with the call of the HAL_FLASH_OB_Unlock() function. + * @note To validate the PCROP options, the option bytes must be reloaded + * through the call of the HAL_FLASH_OB_Launch() function. + * + * @param PCROPConfig specifies the configuration (Bank to be configured and PCROP_RDP option). + * This parameter must be a combination of FLASH_BANK_1 or FLASH_BANK_2 + * with OB_PCROP_RDP_NOT_ERASE or OB_PCROP_RDP_ERASE + * + * @param PCROPStartAddr specifies the start address of the Proprietary code readout protection + * This parameter can be an address between begin and end of the bank + * + * @param PCROPEndAddr specifies the end address of the Proprietary code readout protection + * This parameter can be an address between PCROPStartAddr and end of the bank + * + * @retval HAL Status + */ +static HAL_StatusTypeDef FLASH_OB_PCROPConfig(uint32_t PCROPConfig, uint32_t PCROPStartAddr, uint32_t PCROPEndAddr) +{ + HAL_StatusTypeDef status; + uint32_t reg_value; + uint32_t bank1_addr; +#if defined (STM32L471xx) || defined (STM32L475xx) || defined (STM32L476xx) || defined (STM32L485xx) || defined (STM32L486xx) || \ + defined (STM32L496xx) || defined (STM32L4A6xx) || \ + defined (STM32L4P5xx) || defined (STM32L4Q5xx) || \ + defined (STM32L4R5xx) || defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined (STM32L4S9xx) + uint32_t bank2_addr; +#endif + + /* Check the parameters */ + assert_param(IS_FLASH_BANK_EXCLUSIVE(PCROPConfig & FLASH_BANK_BOTH)); + assert_param(IS_OB_PCROP_RDP(PCROPConfig & FLASH_PCROP1ER_PCROP_RDP)); + assert_param(IS_FLASH_MAIN_MEM_ADDRESS(PCROPStartAddr)); + assert_param(IS_FLASH_MAIN_MEM_ADDRESS(PCROPEndAddr)); + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); + + if(status == HAL_OK) + { +#if defined (STM32L471xx) || defined (STM32L475xx) || defined (STM32L476xx) || defined (STM32L485xx) || defined (STM32L486xx) || \ + defined (STM32L496xx) || defined (STM32L4A6xx) || \ + defined (STM32L4P5xx) || defined (STM32L4Q5xx) || \ + defined (STM32L4R5xx) || defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined (STM32L4S9xx) + /* Get the information about the bank swapping */ + if (READ_BIT(SYSCFG->MEMRMP, SYSCFG_MEMRMP_FB_MODE) == 0U) + { + bank1_addr = FLASH_BASE; + bank2_addr = FLASH_BASE + FLASH_BANK_SIZE; + } + else + { + bank1_addr = FLASH_BASE + FLASH_BANK_SIZE; + bank2_addr = FLASH_BASE; + } +#else + bank1_addr = FLASH_BASE; +#endif + +#if defined (STM32L4P5xx) || defined (STM32L4Q5xx) || defined (STM32L4R5xx) || defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined (STM32L4S9xx) + if (READ_BIT(FLASH->OPTR, FLASH_OPTR_DBANK) == 0U) + { + /* Configure the Proprietary code readout protection */ + if((PCROPConfig & FLASH_BANK_BOTH) == FLASH_BANK_1) + { + reg_value = ((PCROPStartAddr - FLASH_BASE) >> 4); + MODIFY_REG(FLASH->PCROP1SR, FLASH_PCROP1SR_PCROP1_STRT, reg_value); + + reg_value = ((PCROPEndAddr - FLASH_BASE) >> 4); + MODIFY_REG(FLASH->PCROP1ER, FLASH_PCROP1ER_PCROP1_END, reg_value); + } + else if((PCROPConfig & FLASH_BANK_BOTH) == FLASH_BANK_2) + { + reg_value = ((PCROPStartAddr - FLASH_BASE) >> 4); + MODIFY_REG(FLASH->PCROP2SR, FLASH_PCROP2SR_PCROP2_STRT, reg_value); + + reg_value = ((PCROPEndAddr - FLASH_BASE) >> 4); + MODIFY_REG(FLASH->PCROP2ER, FLASH_PCROP2ER_PCROP2_END, reg_value); + } + else + { + /* Nothing to do */ + } + } + else +#endif + { + /* Configure the Proprietary code readout protection */ + if((PCROPConfig & FLASH_BANK_BOTH) == FLASH_BANK_1) + { + reg_value = ((PCROPStartAddr - bank1_addr) >> 3); + MODIFY_REG(FLASH->PCROP1SR, FLASH_PCROP1SR_PCROP1_STRT, reg_value); + + reg_value = ((PCROPEndAddr - bank1_addr) >> 3); + MODIFY_REG(FLASH->PCROP1ER, FLASH_PCROP1ER_PCROP1_END, reg_value); + } +#if defined (STM32L471xx) || defined (STM32L475xx) || defined (STM32L476xx) || defined (STM32L485xx) || defined (STM32L486xx) || \ + defined (STM32L496xx) || defined (STM32L4A6xx) || \ + defined (STM32L4P5xx) || defined (STM32L4Q5xx) || \ + defined (STM32L4R5xx) || defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined (STM32L4S9xx) + else if((PCROPConfig & FLASH_BANK_BOTH) == FLASH_BANK_2) + { + reg_value = ((PCROPStartAddr - bank2_addr) >> 3); + MODIFY_REG(FLASH->PCROP2SR, FLASH_PCROP2SR_PCROP2_STRT, reg_value); + + reg_value = ((PCROPEndAddr - bank2_addr) >> 3); + MODIFY_REG(FLASH->PCROP2ER, FLASH_PCROP2ER_PCROP2_END, reg_value); + } +#endif + else + { + /* Nothing to do */ + } + } + + MODIFY_REG(FLASH->PCROP1ER, FLASH_PCROP1ER_PCROP_RDP, (PCROPConfig & FLASH_PCROP1ER_PCROP_RDP)); + + /* Set OPTSTRT Bit */ + SET_BIT(FLASH->CR, FLASH_CR_OPTSTRT); + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); + + /* If the option byte program operation is completed, disable the OPTSTRT Bit */ + CLEAR_BIT(FLASH->CR, FLASH_CR_OPTSTRT); + } + + return status; +} + +/** + * @brief Return the FLASH Write Protection Option Bytes value. + * + * @param[in] WRPArea: specifies the area to be returned. + * This parameter can be one of the following values: + * @arg OB_WRPAREA_BANK1_AREAA: Flash Bank 1 Area A + * @arg OB_WRPAREA_BANK1_AREAB: Flash Bank 1 Area B + * @arg OB_WRPAREA_BANK2_AREAA: Flash Bank 2 Area A (don't apply to STM32L43x/STM32L44x devices) + * @arg OB_WRPAREA_BANK2_AREAB: Flash Bank 2 Area B (don't apply to STM32L43x/STM32L44x devices) + * + * @param[out] WRPStartOffset: specifies the address where to copied the start page + * of the write protected area + * + * @param[out] WRDPEndOffset: specifies the address where to copied the end page of + * the write protected area + * + * @retval None + */ +static void FLASH_OB_GetWRP(uint32_t WRPArea, uint32_t * WRPStartOffset, uint32_t * WRDPEndOffset) +{ + /* Get the configuration of the write protected area */ + if(WRPArea == OB_WRPAREA_BANK1_AREAA) + { + *WRPStartOffset = READ_BIT(FLASH->WRP1AR, FLASH_WRP1AR_WRP1A_STRT); + *WRDPEndOffset = (READ_BIT(FLASH->WRP1AR, FLASH_WRP1AR_WRP1A_END) >> 16); + } + else if(WRPArea == OB_WRPAREA_BANK1_AREAB) + { + *WRPStartOffset = READ_BIT(FLASH->WRP1BR, FLASH_WRP1BR_WRP1B_STRT); + *WRDPEndOffset = (READ_BIT(FLASH->WRP1BR, FLASH_WRP1BR_WRP1B_END) >> 16); + } +#if defined (STM32L471xx) || defined (STM32L475xx) || defined (STM32L476xx) || defined (STM32L485xx) || defined (STM32L486xx) || \ + defined (STM32L496xx) || defined (STM32L4A6xx) || \ + defined (STM32L4P5xx) || defined (STM32L4Q5xx) || \ + defined (STM32L4R5xx) || defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined (STM32L4S9xx) + else if(WRPArea == OB_WRPAREA_BANK2_AREAA) + { + *WRPStartOffset = READ_BIT(FLASH->WRP2AR, FLASH_WRP2AR_WRP2A_STRT); + *WRDPEndOffset = (READ_BIT(FLASH->WRP2AR, FLASH_WRP2AR_WRP2A_END) >> 16); + } + else if(WRPArea == OB_WRPAREA_BANK2_AREAB) + { + *WRPStartOffset = READ_BIT(FLASH->WRP2BR, FLASH_WRP2BR_WRP2B_STRT); + *WRDPEndOffset = (READ_BIT(FLASH->WRP2BR, FLASH_WRP2BR_WRP2B_END) >> 16); + } +#endif + else + { + /* Nothing to do */ + } +} + +/** + * @brief Return the FLASH Read Protection level. + * @retval FLASH ReadOut Protection Status: + * This return value can be one of the following values: + * @arg OB_RDP_LEVEL_0: No protection + * @arg OB_RDP_LEVEL_1: Read protection of the memory + * @arg OB_RDP_LEVEL_2: Full chip protection + */ +static uint32_t FLASH_OB_GetRDP(void) +{ + uint32_t rdp_level = READ_BIT(FLASH->OPTR, FLASH_OPTR_RDP); + + if ((rdp_level != OB_RDP_LEVEL_0) && (rdp_level != OB_RDP_LEVEL_2)) + { + return (OB_RDP_LEVEL_1); + } + else + { + return (READ_BIT(FLASH->OPTR, FLASH_OPTR_RDP)); + } +} + +/** + * @brief Return the FLASH User Option Byte value. + * @retval The FLASH User Option Bytes values: + * For STM32L47x/STM32L48x devices : + * BOR_LEV(Bit8-10), nRST_STOP(Bit12), nRST_STDBY(Bit13), nRST_SHDW(Bit14), + * IWDG_SW(Bit16), IWDG_STOP(Bit17), IWDG_STDBY(Bit18), WWDG_SW(Bit19), + * BFB2(Bit20), DUALBANK(Bit21), nBOOT1(Bit23), SRAM2_PE(Bit24) and SRAM2_RST(Bit25). + * For STM32L43x/STM32L44x devices : + * BOR_LEV(Bit8-10), nRST_STOP(Bit12), nRST_STDBY(Bit13), nRST_SHDW(Bit14), + * IWDG_SW(Bit16), IWDG_STOP(Bit17), IWDG_STDBY(Bit18), WWDG_SW(Bit19), + * nBOOT1(Bit23), SRAM2_PE(Bit24), SRAM2_RST(Bit25), nSWBOOT0(Bit26) and nBOOT0(Bit27). + */ +static uint32_t FLASH_OB_GetUser(void) +{ + uint32_t user_config = READ_REG(FLASH->OPTR); + CLEAR_BIT(user_config, FLASH_OPTR_RDP); + + return user_config; +} + +/** + * @brief Return the FLASH Write Protection Option Bytes value. + * + * @param PCROPConfig [inout]: specifies the configuration (Bank to be configured and PCROP_RDP option). + * This parameter must be a combination of FLASH_BANK_1 or FLASH_BANK_2 + * with OB_PCROP_RDP_NOT_ERASE or OB_PCROP_RDP_ERASE + * + * @param PCROPStartAddr [out]: specifies the address where to copied the start address + * of the Proprietary code readout protection + * + * @param PCROPEndAddr [out]: specifies the address where to copied the end address of + * the Proprietary code readout protection + * + * @retval None + */ +static void FLASH_OB_GetPCROP(uint32_t * PCROPConfig, uint32_t * PCROPStartAddr, uint32_t * PCROPEndAddr) +{ + uint32_t reg_value; + uint32_t bank1_addr; +#if defined (STM32L471xx) || defined (STM32L475xx) || defined (STM32L476xx) || defined (STM32L485xx) || defined (STM32L486xx) || \ + defined (STM32L496xx) || defined (STM32L4A6xx) || \ + defined (STM32L4P5xx) || defined (STM32L4Q5xx) || \ + defined (STM32L4R5xx) || defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined (STM32L4S9xx) + uint32_t bank2_addr; +#endif + +#if defined (STM32L471xx) || defined (STM32L475xx) || defined (STM32L476xx) || defined (STM32L485xx) || defined (STM32L486xx) || \ + defined (STM32L496xx) || defined (STM32L4A6xx) || \ + defined (STM32L4P5xx) || defined (STM32L4Q5xx) || \ + defined (STM32L4R5xx) || defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined (STM32L4S9xx) + /* Get the information about the bank swapping */ + if (READ_BIT(SYSCFG->MEMRMP, SYSCFG_MEMRMP_FB_MODE) == 0U) + { + bank1_addr = FLASH_BASE; + bank2_addr = FLASH_BASE + FLASH_BANK_SIZE; + } + else + { + bank1_addr = FLASH_BASE + FLASH_BANK_SIZE; + bank2_addr = FLASH_BASE; + } +#else + bank1_addr = FLASH_BASE; +#endif + +#if defined (STM32L4P5xx) || defined (STM32L4Q5xx) || defined (STM32L4R5xx) || defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined (STM32L4S9xx) + if (READ_BIT(FLASH->OPTR, FLASH_OPTR_DBANK) == 0U) + { + if(((*PCROPConfig) & FLASH_BANK_BOTH) == FLASH_BANK_1) + { + reg_value = (READ_REG(FLASH->PCROP1SR) & FLASH_PCROP1SR_PCROP1_STRT); + *PCROPStartAddr = (reg_value << 4) + FLASH_BASE; + + reg_value = (READ_REG(FLASH->PCROP1ER) & FLASH_PCROP1ER_PCROP1_END); + *PCROPEndAddr = (reg_value << 4) + FLASH_BASE + 0xFU; + } + else if(((*PCROPConfig) & FLASH_BANK_BOTH) == FLASH_BANK_2) + { + reg_value = (READ_REG(FLASH->PCROP2SR) & FLASH_PCROP2SR_PCROP2_STRT); + *PCROPStartAddr = (reg_value << 4) + FLASH_BASE; + + reg_value = (READ_REG(FLASH->PCROP2ER) & FLASH_PCROP2ER_PCROP2_END); + *PCROPEndAddr = (reg_value << 4) + FLASH_BASE + 0xFU;; + } + else + { + /* Nothing to do */ + } + } + else +#endif + { + if(((*PCROPConfig) & FLASH_BANK_BOTH) == FLASH_BANK_1) + { + reg_value = (READ_REG(FLASH->PCROP1SR) & FLASH_PCROP1SR_PCROP1_STRT); + *PCROPStartAddr = (reg_value << 3) + bank1_addr; + + reg_value = (READ_REG(FLASH->PCROP1ER) & FLASH_PCROP1ER_PCROP1_END); + *PCROPEndAddr = (reg_value << 3) + bank1_addr + 0x7U; + } +#if defined (STM32L471xx) || defined (STM32L475xx) || defined (STM32L476xx) || defined (STM32L485xx) || defined (STM32L486xx) || \ + defined (STM32L496xx) || defined (STM32L4A6xx) || \ + defined (STM32L4P5xx) || defined (STM32L4Q5xx) || \ + defined (STM32L4R5xx) || defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined (STM32L4S9xx) + else if(((*PCROPConfig) & FLASH_BANK_BOTH) == FLASH_BANK_2) + { + reg_value = (READ_REG(FLASH->PCROP2SR) & FLASH_PCROP2SR_PCROP2_STRT); + *PCROPStartAddr = (reg_value << 3) + bank2_addr; + + reg_value = (READ_REG(FLASH->PCROP2ER) & FLASH_PCROP2ER_PCROP2_END); + *PCROPEndAddr = (reg_value << 3) + bank2_addr + 0x7U; + } +#endif + else + { + /* Nothing to do */ + } + } + + *PCROPConfig |= (READ_REG(FLASH->PCROP1ER) & FLASH_PCROP1ER_PCROP_RDP); +} +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_FLASH_MODULE_ENABLED */ + +/** + * @} + */ + +/** + * @} + */ + diff --git a/CablePositioning_IAP_V1.0/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ramfunc.c b/CablePositioning_IAP_V1.0/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ramfunc.c index b421ce2..82599f9 100644 --- a/CablePositioning_IAP_V1.0/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ramfunc.c +++ b/CablePositioning_IAP_V1.0/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ramfunc.c @@ -1,251 +1,251 @@ -/** - ****************************************************************************** - * @file stm32l4xx_hal_flash_ramfunc.c - * @author MCD Application Team - * @brief FLASH RAMFUNC driver. - * This file provides a Flash firmware functions which should be - * executed from internal SRAM - * + FLASH HalfPage Programming - * + FLASH Power Down in Run mode - * - * @verbatim - ============================================================================== - ##### Flash RAM functions ##### - ============================================================================== - - *** ARM Compiler *** - -------------------- - [..] RAM functions are defined using the toolchain options. - Functions that are executed in RAM should reside in a separate - source module. Using the 'Options for File' dialog you can simply change - the 'Code / Const' area of a module to a memory space in physical RAM. - Available memory areas are declared in the 'Target' tab of the - Options for Target' dialog. - - *** ICCARM Compiler *** - ----------------------- - [..] RAM functions are defined using a specific toolchain keyword "__ramfunc". - - *** GNU Compiler *** - -------------------- - [..] RAM functions are defined using a specific toolchain attribute - "__attribute__((section(".RamFunc")))". - - @endverbatim - ****************************************************************************** - * @attention - * - * Copyright (c) 2017 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file in - * the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32l4xx_hal.h" - -/** @addtogroup STM32L4xx_HAL_Driver - * @{ - */ - -/** @defgroup FLASH_RAMFUNC FLASH_RAMFUNC - * @brief FLASH functions executed from RAM - * @{ - */ - -#ifdef HAL_FLASH_MODULE_ENABLED - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ -/* Exported functions -------------------------------------------------------*/ - -/** @defgroup FLASH_RAMFUNC_Exported_Functions FLASH in RAM function Exported Functions - * @{ - */ - -/** @defgroup FLASH_RAMFUNC_Exported_Functions_Group1 Peripheral features functions - * @brief Data transfers functions - * -@verbatim - =============================================================================== - ##### ramfunc functions ##### - =============================================================================== - [..] - This subsection provides a set of functions that should be executed from RAM. - -@endverbatim - * @{ - */ - -/** - * @brief Enable the Power down in Run Mode - * @note This function should be called and executed from SRAM memory - * @retval HAL status - */ -__RAM_FUNC HAL_StatusTypeDef HAL_FLASHEx_EnableRunPowerDown(void) -{ - /* Enable the Power Down in Run mode*/ - __HAL_FLASH_POWER_DOWN_ENABLE(); - - return HAL_OK; - -} - -/** - * @brief Disable the Power down in Run Mode - * @note This function should be called and executed from SRAM memory - * @retval HAL status - */ -__RAM_FUNC HAL_StatusTypeDef HAL_FLASHEx_DisableRunPowerDown(void) -{ - /* Disable the Power Down in Run mode*/ - __HAL_FLASH_POWER_DOWN_DISABLE(); - - return HAL_OK; -} - -#if defined (STM32L4P5xx) || defined (STM32L4Q5xx) || defined (STM32L4R5xx) || defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined (STM32L4S9xx) -/** - * @brief Program the FLASH DBANK User Option Byte. - * - * @note To configure the user option bytes, the option lock bit OPTLOCK must - * be cleared with the call of the HAL_FLASH_OB_Unlock() function. - * @note To modify the DBANK option byte, no PCROP region should be defined. - * To deactivate PCROP, user should perform RDP changing - * - * @param DBankConfig The FLASH DBANK User Option Byte value. - * This parameter can be one of the following values: - * @arg OB_DBANK_128_BITS: Single-bank with 128-bits data - * @arg OB_DBANK_64_BITS: Dual-bank with 64-bits data - * - * @retval HAL status - */ -__RAM_FUNC HAL_StatusTypeDef HAL_FLASHEx_OB_DBankConfig(uint32_t DBankConfig) -{ - uint32_t count, reg; - HAL_StatusTypeDef status = HAL_ERROR; - - /* Process Locked */ - __HAL_LOCK(&pFlash); - - /* Check if the PCROP is disabled */ - reg = FLASH->PCROP1SR; - if (reg > FLASH->PCROP1ER) - { - reg = FLASH->PCROP2SR; - if (reg > FLASH->PCROP2ER) - { - /* Disable Flash prefetch */ - __HAL_FLASH_PREFETCH_BUFFER_DISABLE(); - - if (READ_BIT(FLASH->ACR, FLASH_ACR_ICEN) != 0U) - { - /* Disable Flash instruction cache */ - __HAL_FLASH_INSTRUCTION_CACHE_DISABLE(); - - /* Flush Flash instruction cache */ - __HAL_FLASH_INSTRUCTION_CACHE_RESET(); - } - - if (READ_BIT(FLASH->ACR, FLASH_ACR_DCEN) != 0U) - { - /* Disable Flash data cache */ - __HAL_FLASH_DATA_CACHE_DISABLE(); - - /* Flush Flash data cache */ - __HAL_FLASH_DATA_CACHE_RESET(); - } - - /* Disable WRP zone 1 of 1st bank if needed */ - reg = FLASH->WRP1AR; - if (((reg & FLASH_WRP1AR_WRP1A_STRT) >> FLASH_WRP1AR_WRP1A_STRT_Pos) <= - ((reg & FLASH_WRP1AR_WRP1A_END) >> FLASH_WRP1AR_WRP1A_END_Pos)) - { - MODIFY_REG(FLASH->WRP1AR, (FLASH_WRP1AR_WRP1A_STRT | FLASH_WRP1AR_WRP1A_END), FLASH_WRP1AR_WRP1A_STRT); - } - - /* Disable WRP zone 2 of 1st bank if needed */ - reg = FLASH->WRP1BR; - if (((reg & FLASH_WRP1BR_WRP1B_STRT) >> FLASH_WRP1BR_WRP1B_STRT_Pos) <= - ((reg & FLASH_WRP1BR_WRP1B_END) >> FLASH_WRP1BR_WRP1B_END_Pos)) - { - MODIFY_REG(FLASH->WRP1BR, (FLASH_WRP1BR_WRP1B_STRT | FLASH_WRP1BR_WRP1B_END), FLASH_WRP1BR_WRP1B_STRT); - } - - /* Disable WRP zone 1 of 2nd bank if needed */ - reg = FLASH->WRP2AR; - if (((reg & FLASH_WRP2AR_WRP2A_STRT) >> FLASH_WRP2AR_WRP2A_STRT_Pos) <= - ((reg & FLASH_WRP2AR_WRP2A_END) >> FLASH_WRP2AR_WRP2A_END_Pos)) - { - MODIFY_REG(FLASH->WRP2AR, (FLASH_WRP2AR_WRP2A_STRT | FLASH_WRP2AR_WRP2A_END), FLASH_WRP2AR_WRP2A_STRT); - } - - /* Disable WRP zone 2 of 2nd bank if needed */ - reg = FLASH->WRP2BR; - if (((reg & FLASH_WRP2BR_WRP2B_STRT) >> FLASH_WRP2BR_WRP2B_STRT_Pos) <= - ((reg & FLASH_WRP2BR_WRP2B_END) >> FLASH_WRP2BR_WRP2B_END_Pos)) - { - MODIFY_REG(FLASH->WRP2BR, (FLASH_WRP2BR_WRP2B_STRT | FLASH_WRP2BR_WRP2B_END), FLASH_WRP2BR_WRP2B_STRT); - } - - /* Modify the DBANK user option byte */ - MODIFY_REG(FLASH->OPTR, FLASH_OPTR_DBANK, DBankConfig); - - /* Set OPTSTRT Bit */ - SET_BIT(FLASH->CR, FLASH_CR_OPTSTRT); - - /* Wait for last operation to be completed */ - /* 8 is the number of required instruction cycles for the below loop statement (timeout expressed in ms) */ - count = FLASH_TIMEOUT_VALUE * (SystemCoreClock / 8U / 1000U); - do - { - if (count == 0U) - { - break; - } - count--; - } while (__HAL_FLASH_GET_FLAG(FLASH_FLAG_BSY) != RESET); - - /* If the option byte program operation is completed, disable the OPTSTRT Bit */ - CLEAR_BIT(FLASH->CR, FLASH_CR_OPTSTRT); - - /* Set the bit to force the option byte reloading */ - SET_BIT(FLASH->CR, FLASH_CR_OBL_LAUNCH); - } - } - - /* Process Unlocked */ - __HAL_UNLOCK(&pFlash); - - return status; -} -#endif - -/** - * @} - */ - -/** - * @} - */ -#endif /* HAL_FLASH_MODULE_ENABLED */ - - - -/** - * @} - */ - -/** - * @} - */ - - - - +/** + ****************************************************************************** + * @file stm32l4xx_hal_flash_ramfunc.c + * @author MCD Application Team + * @brief FLASH RAMFUNC driver. + * This file provides a Flash firmware functions which should be + * executed from internal SRAM + * + FLASH HalfPage Programming + * + FLASH Power Down in Run mode + * + * @verbatim + ============================================================================== + ##### Flash RAM functions ##### + ============================================================================== + + *** ARM Compiler *** + -------------------- + [..] RAM functions are defined using the toolchain options. + Functions that are executed in RAM should reside in a separate + source module. Using the 'Options for File' dialog you can simply change + the 'Code / Const' area of a module to a memory space in physical RAM. + Available memory areas are declared in the 'Target' tab of the + Options for Target' dialog. + + *** ICCARM Compiler *** + ----------------------- + [..] RAM functions are defined using a specific toolchain keyword "__ramfunc". + + *** GNU Compiler *** + -------------------- + [..] RAM functions are defined using a specific toolchain attribute + "__attribute__((section(".RamFunc")))". + + @endverbatim + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file in + * the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l4xx_hal.h" + +/** @addtogroup STM32L4xx_HAL_Driver + * @{ + */ + +/** @defgroup FLASH_RAMFUNC FLASH_RAMFUNC + * @brief FLASH functions executed from RAM + * @{ + */ + +#ifdef HAL_FLASH_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Exported functions -------------------------------------------------------*/ + +/** @defgroup FLASH_RAMFUNC_Exported_Functions FLASH in RAM function Exported Functions + * @{ + */ + +/** @defgroup FLASH_RAMFUNC_Exported_Functions_Group1 Peripheral features functions + * @brief Data transfers functions + * +@verbatim + =============================================================================== + ##### ramfunc functions ##### + =============================================================================== + [..] + This subsection provides a set of functions that should be executed from RAM. + +@endverbatim + * @{ + */ + +/** + * @brief Enable the Power down in Run Mode + * @note This function should be called and executed from SRAM memory + * @retval HAL status + */ +__RAM_FUNC HAL_StatusTypeDef HAL_FLASHEx_EnableRunPowerDown(void) +{ + /* Enable the Power Down in Run mode*/ + __HAL_FLASH_POWER_DOWN_ENABLE(); + + return HAL_OK; + +} + +/** + * @brief Disable the Power down in Run Mode + * @note This function should be called and executed from SRAM memory + * @retval HAL status + */ +__RAM_FUNC HAL_StatusTypeDef HAL_FLASHEx_DisableRunPowerDown(void) +{ + /* Disable the Power Down in Run mode*/ + __HAL_FLASH_POWER_DOWN_DISABLE(); + + return HAL_OK; +} + +#if defined (STM32L4P5xx) || defined (STM32L4Q5xx) || defined (STM32L4R5xx) || defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined (STM32L4S9xx) +/** + * @brief Program the FLASH DBANK User Option Byte. + * + * @note To configure the user option bytes, the option lock bit OPTLOCK must + * be cleared with the call of the HAL_FLASH_OB_Unlock() function. + * @note To modify the DBANK option byte, no PCROP region should be defined. + * To deactivate PCROP, user should perform RDP changing + * + * @param DBankConfig The FLASH DBANK User Option Byte value. + * This parameter can be one of the following values: + * @arg OB_DBANK_128_BITS: Single-bank with 128-bits data + * @arg OB_DBANK_64_BITS: Dual-bank with 64-bits data + * + * @retval HAL status + */ +__RAM_FUNC HAL_StatusTypeDef HAL_FLASHEx_OB_DBankConfig(uint32_t DBankConfig) +{ + uint32_t count, reg; + HAL_StatusTypeDef status = HAL_ERROR; + + /* Process Locked */ + __HAL_LOCK(&pFlash); + + /* Check if the PCROP is disabled */ + reg = FLASH->PCROP1SR; + if (reg > FLASH->PCROP1ER) + { + reg = FLASH->PCROP2SR; + if (reg > FLASH->PCROP2ER) + { + /* Disable Flash prefetch */ + __HAL_FLASH_PREFETCH_BUFFER_DISABLE(); + + if (READ_BIT(FLASH->ACR, FLASH_ACR_ICEN) != 0U) + { + /* Disable Flash instruction cache */ + __HAL_FLASH_INSTRUCTION_CACHE_DISABLE(); + + /* Flush Flash instruction cache */ + __HAL_FLASH_INSTRUCTION_CACHE_RESET(); + } + + if (READ_BIT(FLASH->ACR, FLASH_ACR_DCEN) != 0U) + { + /* Disable Flash data cache */ + __HAL_FLASH_DATA_CACHE_DISABLE(); + + /* Flush Flash data cache */ + __HAL_FLASH_DATA_CACHE_RESET(); + } + + /* Disable WRP zone 1 of 1st bank if needed */ + reg = FLASH->WRP1AR; + if (((reg & FLASH_WRP1AR_WRP1A_STRT) >> FLASH_WRP1AR_WRP1A_STRT_Pos) <= + ((reg & FLASH_WRP1AR_WRP1A_END) >> FLASH_WRP1AR_WRP1A_END_Pos)) + { + MODIFY_REG(FLASH->WRP1AR, (FLASH_WRP1AR_WRP1A_STRT | FLASH_WRP1AR_WRP1A_END), FLASH_WRP1AR_WRP1A_STRT); + } + + /* Disable WRP zone 2 of 1st bank if needed */ + reg = FLASH->WRP1BR; + if (((reg & FLASH_WRP1BR_WRP1B_STRT) >> FLASH_WRP1BR_WRP1B_STRT_Pos) <= + ((reg & FLASH_WRP1BR_WRP1B_END) >> FLASH_WRP1BR_WRP1B_END_Pos)) + { + MODIFY_REG(FLASH->WRP1BR, (FLASH_WRP1BR_WRP1B_STRT | FLASH_WRP1BR_WRP1B_END), FLASH_WRP1BR_WRP1B_STRT); + } + + /* Disable WRP zone 1 of 2nd bank if needed */ + reg = FLASH->WRP2AR; + if (((reg & FLASH_WRP2AR_WRP2A_STRT) >> FLASH_WRP2AR_WRP2A_STRT_Pos) <= + ((reg & FLASH_WRP2AR_WRP2A_END) >> FLASH_WRP2AR_WRP2A_END_Pos)) + { + MODIFY_REG(FLASH->WRP2AR, (FLASH_WRP2AR_WRP2A_STRT | FLASH_WRP2AR_WRP2A_END), FLASH_WRP2AR_WRP2A_STRT); + } + + /* Disable WRP zone 2 of 2nd bank if needed */ + reg = FLASH->WRP2BR; + if (((reg & FLASH_WRP2BR_WRP2B_STRT) >> FLASH_WRP2BR_WRP2B_STRT_Pos) <= + ((reg & FLASH_WRP2BR_WRP2B_END) >> FLASH_WRP2BR_WRP2B_END_Pos)) + { + MODIFY_REG(FLASH->WRP2BR, (FLASH_WRP2BR_WRP2B_STRT | FLASH_WRP2BR_WRP2B_END), FLASH_WRP2BR_WRP2B_STRT); + } + + /* Modify the DBANK user option byte */ + MODIFY_REG(FLASH->OPTR, FLASH_OPTR_DBANK, DBankConfig); + + /* Set OPTSTRT Bit */ + SET_BIT(FLASH->CR, FLASH_CR_OPTSTRT); + + /* Wait for last operation to be completed */ + /* 8 is the number of required instruction cycles for the below loop statement (timeout expressed in ms) */ + count = FLASH_TIMEOUT_VALUE * (SystemCoreClock / 8U / 1000U); + do + { + if (count == 0U) + { + break; + } + count--; + } while (__HAL_FLASH_GET_FLAG(FLASH_FLAG_BSY) != RESET); + + /* If the option byte program operation is completed, disable the OPTSTRT Bit */ + CLEAR_BIT(FLASH->CR, FLASH_CR_OPTSTRT); + + /* Set the bit to force the option byte reloading */ + SET_BIT(FLASH->CR, FLASH_CR_OBL_LAUNCH); + } + } + + /* Process Unlocked */ + __HAL_UNLOCK(&pFlash); + + return status; +} +#endif + +/** + * @} + */ + +/** + * @} + */ +#endif /* HAL_FLASH_MODULE_ENABLED */ + + + +/** + * @} + */ + +/** + * @} + */ + + + + diff --git a/CablePositioning_IAP_V1.0/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_gpio.c b/CablePositioning_IAP_V1.0/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_gpio.c index fe81a8c..5933b2d 100644 --- a/CablePositioning_IAP_V1.0/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_gpio.c +++ b/CablePositioning_IAP_V1.0/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_gpio.c @@ -1,551 +1,551 @@ -/** - ****************************************************************************** - * @file stm32l4xx_hal_gpio.c - * @author MCD Application Team - * @brief GPIO HAL module driver. - * This file provides firmware functions to manage the following - * functionalities of the General Purpose Input/Output (GPIO) peripheral: - * + Initialization and de-initialization functions - * + IO operation functions - * - ****************************************************************************** - * @attention - * - * Copyright (c) 2017 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - @verbatim - ============================================================================== - ##### GPIO Peripheral features ##### - ============================================================================== - [..] - (+) Each port bit of the general-purpose I/O (GPIO) ports can be individually - configured by software in several modes: - (++) Input mode - (++) Analog mode - (++) Output mode - (++) Alternate function mode - (++) External interrupt/event lines - - (+) During and just after reset, the alternate functions and external interrupt - lines are not active and the I/O ports are configured in input floating mode. - - (+) All GPIO pins have weak internal pull-up and pull-down resistors, which can be - activated or not. - - (+) In Output or Alternate mode, each IO can be configured on open-drain or push-pull - type and the IO speed can be selected depending on the VDD value. - - (+) The microcontroller IO pins are connected to onboard peripherals/modules through a - multiplexer that allows only one peripheral alternate function (AF) connected - to an IO pin at a time. In this way, there can be no conflict between peripherals - sharing the same IO pin. - - (+) All ports have external interrupt/event capability. To use external interrupt - lines, the port must be configured in input mode. All available GPIO pins are - connected to the 16 external interrupt/event lines from EXTI0 to EXTI15. - - (+) The external interrupt/event controller consists of up to 39 edge detectors - (16 lines are connected to GPIO) for generating event/interrupt requests (each - input line can be independently configured to select the type (interrupt or event) - and the corresponding trigger event (rising or falling or both). Each line can - also be masked independently. - - ##### How to use this driver ##### - ============================================================================== - [..] - (#) Enable the GPIO AHB clock using the following function: __HAL_RCC_GPIOx_CLK_ENABLE(). - - (#) Configure the GPIO pin(s) using HAL_GPIO_Init(). - (++) Configure the IO mode using "Mode" member from GPIO_InitTypeDef structure - (++) Activate Pull-up, Pull-down resistor using "Pull" member from GPIO_InitTypeDef - structure. - (++) In case of Output or alternate function mode selection: the speed is - configured through "Speed" member from GPIO_InitTypeDef structure. - (++) In alternate mode is selection, the alternate function connected to the IO - is configured through "Alternate" member from GPIO_InitTypeDef structure. - (++) Analog mode is required when a pin is to be used as ADC channel - or DAC output. - (++) In case of external interrupt/event selection the "Mode" member from - GPIO_InitTypeDef structure select the type (interrupt or event) and - the corresponding trigger event (rising or falling or both). - - (#) In case of external interrupt/event mode selection, configure NVIC IRQ priority - mapped to the EXTI line using HAL_NVIC_SetPriority() and enable it using - HAL_NVIC_EnableIRQ(). - - (#) To get the level of a pin configured in input mode use HAL_GPIO_ReadPin(). - - (#) To set/reset the level of a pin configured in output mode use - HAL_GPIO_WritePin()/HAL_GPIO_TogglePin(). - - (#) To lock pin configuration until next reset use HAL_GPIO_LockPin(). - - (#) During and just after reset, the alternate functions are not - active and the GPIO pins are configured in input floating mode (except JTAG - pins). - - (#) The LSE oscillator pins OSC32_IN and OSC32_OUT can be used as general purpose - (PC14 and PC15, respectively) when the LSE oscillator is off. The LSE has - priority over the GPIO function. - - (#) The HSE oscillator pins OSC_IN/OSC_OUT can be used as - general purpose PH0 and PH1, respectively, when the HSE oscillator is off. - The HSE has priority over the GPIO function. - - @endverbatim - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32l4xx_hal.h" - -/** @addtogroup STM32L4xx_HAL_Driver - * @{ - */ - -/** @defgroup GPIO GPIO - * @brief GPIO HAL module driver - * @{ - */ -/** MISRA C:2012 deviation rule has been granted for following rules: - * Rule-12.2 - Medium: RHS argument is in interval [0,INF] which is out of - * range of the shift operator in following API : - * HAL_GPIO_Init - * HAL_GPIO_DeInit - */ - -#ifdef HAL_GPIO_MODULE_ENABLED - -/* Private typedef -----------------------------------------------------------*/ -/* Private defines -----------------------------------------------------------*/ -/** @addtogroup GPIO_Private_Defines GPIO Private Defines - * @{ - */ -#define GPIO_NUMBER (16u) -/** - * @} - */ - -/* Private macros ------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ -/* Exported functions --------------------------------------------------------*/ - -/** @defgroup GPIO_Exported_Functions GPIO Exported Functions - * @{ - */ - -/** @defgroup GPIO_Exported_Functions_Group1 Initialization/de-initialization functions - * @brief Initialization and Configuration functions - * -@verbatim - =============================================================================== - ##### Initialization and de-initialization functions ##### - =============================================================================== - -@endverbatim - * @{ - */ - -/** - * @brief Initialize the GPIOx peripheral according to the specified parameters in the GPIO_Init. - * @param GPIOx where x can be (A..H) to select the GPIO peripheral for STM32L4 family - * @param GPIO_Init pointer to a GPIO_InitTypeDef structure that contains - * the configuration information for the specified GPIO peripheral. - * @retval None - */ -void HAL_GPIO_Init(GPIO_TypeDef *GPIOx, GPIO_InitTypeDef *GPIO_Init) -{ - uint32_t position = 0x00u; - uint32_t iocurrent; - uint32_t temp; - - /* Check the parameters */ - assert_param(IS_GPIO_ALL_INSTANCE(GPIOx)); - assert_param(IS_GPIO_PIN(GPIO_Init->Pin)); - assert_param(IS_GPIO_MODE(GPIO_Init->Mode)); - - /* Configure the port pins */ - while (((GPIO_Init->Pin) >> position) != 0x00u) - { - /* Get current io position */ - iocurrent = (GPIO_Init->Pin) & (1uL << position); - - if (iocurrent != 0x00u) - { - /*--------------------- GPIO Mode Configuration ------------------------*/ - /* In case of Output or Alternate function mode selection */ - if (((GPIO_Init->Mode & GPIO_MODE) == MODE_OUTPUT) || ((GPIO_Init->Mode & GPIO_MODE) == MODE_AF)) - { - /* Check the Speed parameter */ - assert_param(IS_GPIO_SPEED(GPIO_Init->Speed)); - - /* Configure the IO Speed */ - temp = GPIOx->OSPEEDR; - temp &= ~(GPIO_OSPEEDR_OSPEED0 << (position * 2u)); - temp |= (GPIO_Init->Speed << (position * 2u)); - GPIOx->OSPEEDR = temp; - - /* Configure the IO Output Type */ - temp = GPIOx->OTYPER; - temp &= ~(GPIO_OTYPER_OT0 << position) ; - temp |= (((GPIO_Init->Mode & OUTPUT_TYPE) >> OUTPUT_TYPE_Pos) << position); - GPIOx->OTYPER = temp; - } - -#if defined(STM32L471xx) || defined(STM32L475xx) || defined(STM32L476xx) || defined(STM32L485xx) || defined(STM32L486xx) - - /* In case of Analog mode, check if ADC control mode is selected */ - if((GPIO_Init->Mode & GPIO_MODE_ANALOG) == GPIO_MODE_ANALOG) - { - /* Configure the IO Output Type */ - temp = GPIOx->ASCR; - temp &= ~(GPIO_ASCR_ASC0 << position) ; - temp |= (((GPIO_Init->Mode & GPIO_MODE_ANALOG_ADC_CONTROL) >> 3) << position); - GPIOx->ASCR = temp; - } - -#endif /* STM32L471xx || STM32L475xx || STM32L476xx || STM32L485xx || STM32L486xx */ - - /* Activate the Pull-up or Pull down resistor for the current IO */ - if ((GPIO_Init->Mode & GPIO_MODE) != MODE_ANALOG) - { - /* Check the Pull parameter */ - assert_param(IS_GPIO_PULL(GPIO_Init->Pull)); - - temp = GPIOx->PUPDR; - temp &= ~(GPIO_PUPDR_PUPD0 << (position * 2U)); - temp |= ((GPIO_Init->Pull) << (position * 2U)); - GPIOx->PUPDR = temp; - } - - /* In case of Alternate function mode selection */ - if ((GPIO_Init->Mode & GPIO_MODE) == MODE_AF) - { - /* Check the Alternate function parameters */ - assert_param(IS_GPIO_AF_INSTANCE(GPIOx)); - assert_param(IS_GPIO_AF(GPIO_Init->Alternate)); - - /* Configure Alternate function mapped with the current IO */ - temp = GPIOx->AFR[position >> 3u]; - temp &= ~(0xFu << ((position & 0x07u) * 4u)); - temp |= ((GPIO_Init->Alternate) << ((position & 0x07u) * 4u)); - GPIOx->AFR[position >> 3u] = temp; - } - - /* Configure IO Direction mode (Input, Output, Alternate or Analog) */ - temp = GPIOx->MODER; - temp &= ~(GPIO_MODER_MODE0 << (position * 2u)); - temp |= ((GPIO_Init->Mode & GPIO_MODE) << (position * 2u)); - GPIOx->MODER = temp; - - /*--------------------- EXTI Mode Configuration ------------------------*/ - /* Configure the External Interrupt or event for the current IO */ - if ((GPIO_Init->Mode & EXTI_MODE) != 0x00u) - { - /* Enable SYSCFG Clock */ - __HAL_RCC_SYSCFG_CLK_ENABLE(); - - temp = SYSCFG->EXTICR[position >> 2u]; - temp &= ~(0x0FuL << (4u * (position & 0x03u))); - temp |= (GPIO_GET_INDEX(GPIOx) << (4u * (position & 0x03u))); - SYSCFG->EXTICR[position >> 2u] = temp; - - /* Clear Rising Falling edge configuration */ - temp = EXTI->RTSR1; - temp &= ~(iocurrent); - if ((GPIO_Init->Mode & TRIGGER_RISING) != 0x00u) - { - temp |= iocurrent; - } - EXTI->RTSR1 = temp; - - temp = EXTI->FTSR1; - temp &= ~(iocurrent); - if ((GPIO_Init->Mode & TRIGGER_FALLING) != 0x00u) - { - temp |= iocurrent; - } - EXTI->FTSR1 = temp; - - /* Clear EXTI line configuration */ - temp = EXTI->EMR1; - temp &= ~(iocurrent); - if ((GPIO_Init->Mode & EXTI_EVT) != 0x00u) - { - temp |= iocurrent; - } - EXTI->EMR1 = temp; - - temp = EXTI->IMR1; - temp &= ~(iocurrent); - if ((GPIO_Init->Mode & EXTI_IT) != 0x00u) - { - temp |= iocurrent; - } - EXTI->IMR1 = temp; - } - } - - position++; - } -} - -/** - * @brief De-initialize the GPIOx peripheral registers to their default reset values. - * @param GPIOx where x can be (A..H) to select the GPIO peripheral for STM32L4 family - * @param GPIO_Pin specifies the port bit to be written. - * This parameter can be any combination of GPIO_Pin_x where x can be (0..15). - * @retval None - */ -void HAL_GPIO_DeInit(GPIO_TypeDef *GPIOx, uint32_t GPIO_Pin) -{ - uint32_t position = 0x00u; - uint32_t iocurrent; - uint32_t tmp; - - /* Check the parameters */ - assert_param(IS_GPIO_ALL_INSTANCE(GPIOx)); - assert_param(IS_GPIO_PIN(GPIO_Pin)); - - /* Configure the port pins */ - while ((GPIO_Pin >> position) != 0x00u) - { - /* Get current io position */ - iocurrent = (GPIO_Pin) & (1uL << position); - - if (iocurrent != 0x00u) - { - /*------------------------- EXTI Mode Configuration --------------------*/ - /* Clear the External Interrupt or Event for the current IO */ - - tmp = SYSCFG->EXTICR[position >> 2u]; - tmp &= (0x0FuL << (4u * (position & 0x03u))); - if (tmp == (GPIO_GET_INDEX(GPIOx) << (4u * (position & 0x03u)))) - { - /* Clear EXTI line configuration */ - EXTI->IMR1 &= ~(iocurrent); - EXTI->EMR1 &= ~(iocurrent); - - /* Clear Rising Falling edge configuration */ - EXTI->FTSR1 &= ~(iocurrent); - EXTI->RTSR1 &= ~(iocurrent); - - tmp = 0x0FuL << (4u * (position & 0x03u)); - SYSCFG->EXTICR[position >> 2u] &= ~tmp; - } - - /*------------------------- GPIO Mode Configuration --------------------*/ - /* Configure IO in Analog Mode */ - GPIOx->MODER |= (GPIO_MODER_MODE0 << (position * 2u)); - - /* Configure the default Alternate Function in current IO */ - GPIOx->AFR[position >> 3u] &= ~(0xFu << ((position & 0x07u) * 4u)) ; - - /* Configure the default value for IO Speed */ - GPIOx->OSPEEDR &= ~(GPIO_OSPEEDR_OSPEED0 << (position * 2u)); - - /* Configure the default value IO Output Type */ - GPIOx->OTYPER &= ~(GPIO_OTYPER_OT0 << position) ; - - /* Deactivate the Pull-up and Pull-down resistor for the current IO */ - GPIOx->PUPDR &= ~(GPIO_PUPDR_PUPD0 << (position * 2u)); - -#if defined(STM32L471xx) || defined(STM32L475xx) || defined(STM32L476xx) || defined(STM32L485xx) || defined(STM32L486xx) - /* Deactivate the Control bit of Analog mode for the current IO */ - GPIOx->ASCR &= ~(GPIO_ASCR_ASC0<< position); -#endif /* STM32L471xx || STM32L475xx || STM32L476xx || STM32L485xx || STM32L486xx */ - } - - position++; - } -} - -/** - * @} - */ - -/** @defgroup GPIO_Exported_Functions_Group2 IO operation functions - * @brief GPIO Read, Write, Toggle, Lock and EXTI management functions. - * -@verbatim - =============================================================================== - ##### IO operation functions ##### - =============================================================================== - -@endverbatim - * @{ - */ - -/** - * @brief Read the specified input port pin. - * @param GPIOx where x can be (A..H) to select the GPIO peripheral for STM32L4 family - * @param GPIO_Pin specifies the port bit to read. - * This parameter can be any combination of GPIO_Pin_x where x can be (0..15). - * @retval The input port pin value. - */ -GPIO_PinState HAL_GPIO_ReadPin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin) -{ - GPIO_PinState bitstatus; - - /* Check the parameters */ - assert_param(IS_GPIO_PIN(GPIO_Pin)); - - if ((GPIOx->IDR & GPIO_Pin) != 0x00u) - { - bitstatus = GPIO_PIN_SET; - } - else - { - bitstatus = GPIO_PIN_RESET; - } - return bitstatus; -} - -/** - * @brief Set or clear the selected data port bit. - * - * @note This function uses GPIOx_BSRR and GPIOx_BRR registers to allow atomic read/modify - * accesses. In this way, there is no risk of an IRQ occurring between - * the read and the modify access. - * - * @param GPIOx where x can be (A..H) to select the GPIO peripheral for STM32L4 family - * @param GPIO_Pin specifies the port bit to be written. - * This parameter can be any combination of GPIO_Pin_x where x can be (0..15). - * @param PinState specifies the value to be written to the selected bit. - * This parameter can be one of the GPIO_PinState enum values: - * @arg GPIO_PIN_RESET: to clear the port pin - * @arg GPIO_PIN_SET: to set the port pin - * @retval None - */ -void HAL_GPIO_WritePin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin, GPIO_PinState PinState) -{ - /* Check the parameters */ - assert_param(IS_GPIO_PIN(GPIO_Pin)); - assert_param(IS_GPIO_PIN_ACTION(PinState)); - - if(PinState != GPIO_PIN_RESET) - { - GPIOx->BSRR = (uint32_t)GPIO_Pin; - } - else - { - GPIOx->BRR = (uint32_t)GPIO_Pin; - } -} - -/** - * @brief Toggle the specified GPIO pin. - * @param GPIOx where x can be (A..H) to select the GPIO peripheral for STM32L4 family - * @param GPIO_Pin specifies the pin to be toggled. - * @retval None - */ -void HAL_GPIO_TogglePin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin) -{ - uint32_t odr; - - /* Check the parameters */ - assert_param(IS_GPIO_PIN(GPIO_Pin)); - - /* get current Output Data Register value */ - odr = GPIOx->ODR; - - /* Set selected pins that were at low level, and reset ones that were high */ - GPIOx->BSRR = ((odr & GPIO_Pin) << GPIO_NUMBER) | (~odr & GPIO_Pin); -} - -/** -* @brief Lock GPIO Pins configuration registers. - * @note The locked registers are GPIOx_MODER, GPIOx_OTYPER, GPIOx_OSPEEDR, - * GPIOx_PUPDR, GPIOx_AFRL and GPIOx_AFRH. - * @note The configuration of the locked GPIO pins can no longer be modified - * until the next reset. - * @param GPIOx where x can be (A..H) to select the GPIO peripheral for STM32L4 family - * @param GPIO_Pin specifies the port bits to be locked. - * This parameter can be any combination of GPIO_Pin_x where x can be (0..15). - * @retval None - */ -HAL_StatusTypeDef HAL_GPIO_LockPin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin) -{ - __IO uint32_t tmp = GPIO_LCKR_LCKK; - - /* Check the parameters */ - assert_param(IS_GPIO_LOCK_INSTANCE(GPIOx)); - assert_param(IS_GPIO_PIN(GPIO_Pin)); - - /* Apply lock key write sequence */ - tmp |= GPIO_Pin; - /* Set LCKx bit(s): LCKK='1' + LCK[15-0] */ - GPIOx->LCKR = tmp; - /* Reset LCKx bit(s): LCKK='0' + LCK[15-0] */ - GPIOx->LCKR = GPIO_Pin; - /* Set LCKx bit(s): LCKK='1' + LCK[15-0] */ - GPIOx->LCKR = tmp; - /* Read LCKK register. This read is mandatory to complete key lock sequence */ - tmp = GPIOx->LCKR; - - /* Read again in order to confirm lock is active */ - if ((GPIOx->LCKR & GPIO_LCKR_LCKK) != 0x00u) - { - return HAL_OK; - } - else - { - return HAL_ERROR; - } -} - -/** - * @brief Handle EXTI interrupt request. - * @param GPIO_Pin Specifies the port pin connected to corresponding EXTI line. - * @retval None - */ -void HAL_GPIO_EXTI_IRQHandler(uint16_t GPIO_Pin) -{ - /* EXTI line interrupt detected */ - if(__HAL_GPIO_EXTI_GET_IT(GPIO_Pin) != 0x00u) - { - __HAL_GPIO_EXTI_CLEAR_IT(GPIO_Pin); - HAL_GPIO_EXTI_Callback(GPIO_Pin); - } -} - -/** - * @brief EXTI line detection callback. - * @param GPIO_Pin Specifies the port pin connected to corresponding EXTI line. - * @retval None - */ -__weak void HAL_GPIO_EXTI_Callback(uint16_t GPIO_Pin) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(GPIO_Pin); - - /* NOTE: This function should not be modified, when the callback is needed, - the HAL_GPIO_EXTI_Callback could be implemented in the user file - */ -} - -/** - * @} - */ - - -/** - * @} - */ - -#endif /* HAL_GPIO_MODULE_ENABLED */ -/** - * @} - */ - -/** - * @} - */ - +/** + ****************************************************************************** + * @file stm32l4xx_hal_gpio.c + * @author MCD Application Team + * @brief GPIO HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the General Purpose Input/Output (GPIO) peripheral: + * + Initialization and de-initialization functions + * + IO operation functions + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### GPIO Peripheral features ##### + ============================================================================== + [..] + (+) Each port bit of the general-purpose I/O (GPIO) ports can be individually + configured by software in several modes: + (++) Input mode + (++) Analog mode + (++) Output mode + (++) Alternate function mode + (++) External interrupt/event lines + + (+) During and just after reset, the alternate functions and external interrupt + lines are not active and the I/O ports are configured in input floating mode. + + (+) All GPIO pins have weak internal pull-up and pull-down resistors, which can be + activated or not. + + (+) In Output or Alternate mode, each IO can be configured on open-drain or push-pull + type and the IO speed can be selected depending on the VDD value. + + (+) The microcontroller IO pins are connected to onboard peripherals/modules through a + multiplexer that allows only one peripheral alternate function (AF) connected + to an IO pin at a time. In this way, there can be no conflict between peripherals + sharing the same IO pin. + + (+) All ports have external interrupt/event capability. To use external interrupt + lines, the port must be configured in input mode. All available GPIO pins are + connected to the 16 external interrupt/event lines from EXTI0 to EXTI15. + + (+) The external interrupt/event controller consists of up to 39 edge detectors + (16 lines are connected to GPIO) for generating event/interrupt requests (each + input line can be independently configured to select the type (interrupt or event) + and the corresponding trigger event (rising or falling or both). Each line can + also be masked independently. + + ##### How to use this driver ##### + ============================================================================== + [..] + (#) Enable the GPIO AHB clock using the following function: __HAL_RCC_GPIOx_CLK_ENABLE(). + + (#) Configure the GPIO pin(s) using HAL_GPIO_Init(). + (++) Configure the IO mode using "Mode" member from GPIO_InitTypeDef structure + (++) Activate Pull-up, Pull-down resistor using "Pull" member from GPIO_InitTypeDef + structure. + (++) In case of Output or alternate function mode selection: the speed is + configured through "Speed" member from GPIO_InitTypeDef structure. + (++) In alternate mode is selection, the alternate function connected to the IO + is configured through "Alternate" member from GPIO_InitTypeDef structure. + (++) Analog mode is required when a pin is to be used as ADC channel + or DAC output. + (++) In case of external interrupt/event selection the "Mode" member from + GPIO_InitTypeDef structure select the type (interrupt or event) and + the corresponding trigger event (rising or falling or both). + + (#) In case of external interrupt/event mode selection, configure NVIC IRQ priority + mapped to the EXTI line using HAL_NVIC_SetPriority() and enable it using + HAL_NVIC_EnableIRQ(). + + (#) To get the level of a pin configured in input mode use HAL_GPIO_ReadPin(). + + (#) To set/reset the level of a pin configured in output mode use + HAL_GPIO_WritePin()/HAL_GPIO_TogglePin(). + + (#) To lock pin configuration until next reset use HAL_GPIO_LockPin(). + + (#) During and just after reset, the alternate functions are not + active and the GPIO pins are configured in input floating mode (except JTAG + pins). + + (#) The LSE oscillator pins OSC32_IN and OSC32_OUT can be used as general purpose + (PC14 and PC15, respectively) when the LSE oscillator is off. The LSE has + priority over the GPIO function. + + (#) The HSE oscillator pins OSC_IN/OSC_OUT can be used as + general purpose PH0 and PH1, respectively, when the HSE oscillator is off. + The HSE has priority over the GPIO function. + + @endverbatim + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l4xx_hal.h" + +/** @addtogroup STM32L4xx_HAL_Driver + * @{ + */ + +/** @defgroup GPIO GPIO + * @brief GPIO HAL module driver + * @{ + */ +/** MISRA C:2012 deviation rule has been granted for following rules: + * Rule-12.2 - Medium: RHS argument is in interval [0,INF] which is out of + * range of the shift operator in following API : + * HAL_GPIO_Init + * HAL_GPIO_DeInit + */ + +#ifdef HAL_GPIO_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private defines -----------------------------------------------------------*/ +/** @addtogroup GPIO_Private_Defines GPIO Private Defines + * @{ + */ +#define GPIO_NUMBER (16u) +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup GPIO_Exported_Functions GPIO Exported Functions + * @{ + */ + +/** @defgroup GPIO_Exported_Functions_Group1 Initialization/de-initialization functions + * @brief Initialization and Configuration functions + * +@verbatim + =============================================================================== + ##### Initialization and de-initialization functions ##### + =============================================================================== + +@endverbatim + * @{ + */ + +/** + * @brief Initialize the GPIOx peripheral according to the specified parameters in the GPIO_Init. + * @param GPIOx where x can be (A..H) to select the GPIO peripheral for STM32L4 family + * @param GPIO_Init pointer to a GPIO_InitTypeDef structure that contains + * the configuration information for the specified GPIO peripheral. + * @retval None + */ +void HAL_GPIO_Init(GPIO_TypeDef *GPIOx, GPIO_InitTypeDef *GPIO_Init) +{ + uint32_t position = 0x00u; + uint32_t iocurrent; + uint32_t temp; + + /* Check the parameters */ + assert_param(IS_GPIO_ALL_INSTANCE(GPIOx)); + assert_param(IS_GPIO_PIN(GPIO_Init->Pin)); + assert_param(IS_GPIO_MODE(GPIO_Init->Mode)); + + /* Configure the port pins */ + while (((GPIO_Init->Pin) >> position) != 0x00u) + { + /* Get current io position */ + iocurrent = (GPIO_Init->Pin) & (1uL << position); + + if (iocurrent != 0x00u) + { + /*--------------------- GPIO Mode Configuration ------------------------*/ + /* In case of Output or Alternate function mode selection */ + if (((GPIO_Init->Mode & GPIO_MODE) == MODE_OUTPUT) || ((GPIO_Init->Mode & GPIO_MODE) == MODE_AF)) + { + /* Check the Speed parameter */ + assert_param(IS_GPIO_SPEED(GPIO_Init->Speed)); + + /* Configure the IO Speed */ + temp = GPIOx->OSPEEDR; + temp &= ~(GPIO_OSPEEDR_OSPEED0 << (position * 2u)); + temp |= (GPIO_Init->Speed << (position * 2u)); + GPIOx->OSPEEDR = temp; + + /* Configure the IO Output Type */ + temp = GPIOx->OTYPER; + temp &= ~(GPIO_OTYPER_OT0 << position) ; + temp |= (((GPIO_Init->Mode & OUTPUT_TYPE) >> OUTPUT_TYPE_Pos) << position); + GPIOx->OTYPER = temp; + } + +#if defined(STM32L471xx) || defined(STM32L475xx) || defined(STM32L476xx) || defined(STM32L485xx) || defined(STM32L486xx) + + /* In case of Analog mode, check if ADC control mode is selected */ + if((GPIO_Init->Mode & GPIO_MODE_ANALOG) == GPIO_MODE_ANALOG) + { + /* Configure the IO Output Type */ + temp = GPIOx->ASCR; + temp &= ~(GPIO_ASCR_ASC0 << position) ; + temp |= (((GPIO_Init->Mode & GPIO_MODE_ANALOG_ADC_CONTROL) >> 3) << position); + GPIOx->ASCR = temp; + } + +#endif /* STM32L471xx || STM32L475xx || STM32L476xx || STM32L485xx || STM32L486xx */ + + /* Activate the Pull-up or Pull down resistor for the current IO */ + if ((GPIO_Init->Mode & GPIO_MODE) != MODE_ANALOG) + { + /* Check the Pull parameter */ + assert_param(IS_GPIO_PULL(GPIO_Init->Pull)); + + temp = GPIOx->PUPDR; + temp &= ~(GPIO_PUPDR_PUPD0 << (position * 2U)); + temp |= ((GPIO_Init->Pull) << (position * 2U)); + GPIOx->PUPDR = temp; + } + + /* In case of Alternate function mode selection */ + if ((GPIO_Init->Mode & GPIO_MODE) == MODE_AF) + { + /* Check the Alternate function parameters */ + assert_param(IS_GPIO_AF_INSTANCE(GPIOx)); + assert_param(IS_GPIO_AF(GPIO_Init->Alternate)); + + /* Configure Alternate function mapped with the current IO */ + temp = GPIOx->AFR[position >> 3u]; + temp &= ~(0xFu << ((position & 0x07u) * 4u)); + temp |= ((GPIO_Init->Alternate) << ((position & 0x07u) * 4u)); + GPIOx->AFR[position >> 3u] = temp; + } + + /* Configure IO Direction mode (Input, Output, Alternate or Analog) */ + temp = GPIOx->MODER; + temp &= ~(GPIO_MODER_MODE0 << (position * 2u)); + temp |= ((GPIO_Init->Mode & GPIO_MODE) << (position * 2u)); + GPIOx->MODER = temp; + + /*--------------------- EXTI Mode Configuration ------------------------*/ + /* Configure the External Interrupt or event for the current IO */ + if ((GPIO_Init->Mode & EXTI_MODE) != 0x00u) + { + /* Enable SYSCFG Clock */ + __HAL_RCC_SYSCFG_CLK_ENABLE(); + + temp = SYSCFG->EXTICR[position >> 2u]; + temp &= ~(0x0FuL << (4u * (position & 0x03u))); + temp |= (GPIO_GET_INDEX(GPIOx) << (4u * (position & 0x03u))); + SYSCFG->EXTICR[position >> 2u] = temp; + + /* Clear Rising Falling edge configuration */ + temp = EXTI->RTSR1; + temp &= ~(iocurrent); + if ((GPIO_Init->Mode & TRIGGER_RISING) != 0x00u) + { + temp |= iocurrent; + } + EXTI->RTSR1 = temp; + + temp = EXTI->FTSR1; + temp &= ~(iocurrent); + if ((GPIO_Init->Mode & TRIGGER_FALLING) != 0x00u) + { + temp |= iocurrent; + } + EXTI->FTSR1 = temp; + + /* Clear EXTI line configuration */ + temp = EXTI->EMR1; + temp &= ~(iocurrent); + if ((GPIO_Init->Mode & EXTI_EVT) != 0x00u) + { + temp |= iocurrent; + } + EXTI->EMR1 = temp; + + temp = EXTI->IMR1; + temp &= ~(iocurrent); + if ((GPIO_Init->Mode & EXTI_IT) != 0x00u) + { + temp |= iocurrent; + } + EXTI->IMR1 = temp; + } + } + + position++; + } +} + +/** + * @brief De-initialize the GPIOx peripheral registers to their default reset values. + * @param GPIOx where x can be (A..H) to select the GPIO peripheral for STM32L4 family + * @param GPIO_Pin specifies the port bit to be written. + * This parameter can be any combination of GPIO_PIN_x where x can be (0..15). + * @retval None + */ +void HAL_GPIO_DeInit(GPIO_TypeDef *GPIOx, uint32_t GPIO_Pin) +{ + uint32_t position = 0x00u; + uint32_t iocurrent; + uint32_t tmp; + + /* Check the parameters */ + assert_param(IS_GPIO_ALL_INSTANCE(GPIOx)); + assert_param(IS_GPIO_PIN(GPIO_Pin)); + + /* Configure the port pins */ + while ((GPIO_Pin >> position) != 0x00u) + { + /* Get current io position */ + iocurrent = (GPIO_Pin) & (1uL << position); + + if (iocurrent != 0x00u) + { + /*------------------------- EXTI Mode Configuration --------------------*/ + /* Clear the External Interrupt or Event for the current IO */ + + tmp = SYSCFG->EXTICR[position >> 2u]; + tmp &= (0x0FuL << (4u * (position & 0x03u))); + if (tmp == (GPIO_GET_INDEX(GPIOx) << (4u * (position & 0x03u)))) + { + /* Clear EXTI line configuration */ + EXTI->IMR1 &= ~(iocurrent); + EXTI->EMR1 &= ~(iocurrent); + + /* Clear Rising Falling edge configuration */ + EXTI->FTSR1 &= ~(iocurrent); + EXTI->RTSR1 &= ~(iocurrent); + + tmp = 0x0FuL << (4u * (position & 0x03u)); + SYSCFG->EXTICR[position >> 2u] &= ~tmp; + } + + /*------------------------- GPIO Mode Configuration --------------------*/ + /* Configure IO in Analog Mode */ + GPIOx->MODER |= (GPIO_MODER_MODE0 << (position * 2u)); + + /* Configure the default Alternate Function in current IO */ + GPIOx->AFR[position >> 3u] &= ~(0xFu << ((position & 0x07u) * 4u)) ; + + /* Configure the default value for IO Speed */ + GPIOx->OSPEEDR &= ~(GPIO_OSPEEDR_OSPEED0 << (position * 2u)); + + /* Configure the default value IO Output Type */ + GPIOx->OTYPER &= ~(GPIO_OTYPER_OT0 << position) ; + + /* Deactivate the Pull-up and Pull-down resistor for the current IO */ + GPIOx->PUPDR &= ~(GPIO_PUPDR_PUPD0 << (position * 2u)); + +#if defined(STM32L471xx) || defined(STM32L475xx) || defined(STM32L476xx) || defined(STM32L485xx) || defined(STM32L486xx) + /* Deactivate the Control bit of Analog mode for the current IO */ + GPIOx->ASCR &= ~(GPIO_ASCR_ASC0<< position); +#endif /* STM32L471xx || STM32L475xx || STM32L476xx || STM32L485xx || STM32L486xx */ + } + + position++; + } +} + +/** + * @} + */ + +/** @defgroup GPIO_Exported_Functions_Group2 IO operation functions + * @brief GPIO Read, Write, Toggle, Lock and EXTI management functions. + * +@verbatim + =============================================================================== + ##### IO operation functions ##### + =============================================================================== + +@endverbatim + * @{ + */ + +/** + * @brief Read the specified input port pin. + * @param GPIOx where x can be (A..H) to select the GPIO peripheral for STM32L4 family + * @param GPIO_Pin specifies the port bit to read. + * This parameter can be any combination of GPIO_PIN_x where x can be (0..15). + * @retval The input port pin value. + */ +GPIO_PinState HAL_GPIO_ReadPin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin) +{ + GPIO_PinState bitstatus; + + /* Check the parameters */ + assert_param(IS_GPIO_PIN(GPIO_Pin)); + + if ((GPIOx->IDR & GPIO_Pin) != 0x00u) + { + bitstatus = GPIO_PIN_SET; + } + else + { + bitstatus = GPIO_PIN_RESET; + } + return bitstatus; +} + +/** + * @brief Set or clear the selected data port bit. + * + * @note This function uses GPIOx_BSRR and GPIOx_BRR registers to allow atomic read/modify + * accesses. In this way, there is no risk of an IRQ occurring between + * the read and the modify access. + * + * @param GPIOx where x can be (A..H) to select the GPIO peripheral for STM32L4 family + * @param GPIO_Pin specifies the port bit to be written. + * This parameter can be any combination of GPIO_PIN_x where x can be (0..15). + * @param PinState specifies the value to be written to the selected bit. + * This parameter can be one of the GPIO_PinState enum values: + * @arg GPIO_PIN_RESET: to clear the port pin + * @arg GPIO_PIN_SET: to set the port pin + * @retval None + */ +void HAL_GPIO_WritePin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin, GPIO_PinState PinState) +{ + /* Check the parameters */ + assert_param(IS_GPIO_PIN(GPIO_Pin)); + assert_param(IS_GPIO_PIN_ACTION(PinState)); + + if(PinState != GPIO_PIN_RESET) + { + GPIOx->BSRR = (uint32_t)GPIO_Pin; + } + else + { + GPIOx->BRR = (uint32_t)GPIO_Pin; + } +} + +/** + * @brief Toggle the specified GPIO pin. + * @param GPIOx where x can be (A..H) to select the GPIO peripheral for STM32L4 family + * @param GPIO_Pin specifies the pin to be toggled. + * @retval None + */ +void HAL_GPIO_TogglePin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin) +{ + uint32_t odr; + + /* Check the parameters */ + assert_param(IS_GPIO_PIN(GPIO_Pin)); + + /* get current Output Data Register value */ + odr = GPIOx->ODR; + + /* Set selected pins that were at low level, and reset ones that were high */ + GPIOx->BSRR = ((odr & GPIO_Pin) << GPIO_NUMBER) | (~odr & GPIO_Pin); +} + +/** +* @brief Lock GPIO Pins configuration registers. + * @note The locked registers are GPIOx_MODER, GPIOx_OTYPER, GPIOx_OSPEEDR, + * GPIOx_PUPDR, GPIOx_AFRL and GPIOx_AFRH. + * @note The configuration of the locked GPIO pins can no longer be modified + * until the next reset. + * @param GPIOx where x can be (A..H) to select the GPIO peripheral for STM32L4 family + * @param GPIO_Pin specifies the port bits to be locked. + * This parameter can be any combination of GPIO_PIN_x where x can be (0..15). + * @retval None + */ +HAL_StatusTypeDef HAL_GPIO_LockPin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin) +{ + __IO uint32_t tmp = GPIO_LCKR_LCKK; + + /* Check the parameters */ + assert_param(IS_GPIO_LOCK_INSTANCE(GPIOx)); + assert_param(IS_GPIO_PIN(GPIO_Pin)); + + /* Apply lock key write sequence */ + tmp |= GPIO_Pin; + /* Set LCKx bit(s): LCKK='1' + LCK[15-0] */ + GPIOx->LCKR = tmp; + /* Reset LCKx bit(s): LCKK='0' + LCK[15-0] */ + GPIOx->LCKR = GPIO_Pin; + /* Set LCKx bit(s): LCKK='1' + LCK[15-0] */ + GPIOx->LCKR = tmp; + /* Read LCKK register. This read is mandatory to complete key lock sequence */ + tmp = GPIOx->LCKR; + + /* Read again in order to confirm lock is active */ + if ((GPIOx->LCKR & GPIO_LCKR_LCKK) != 0x00u) + { + return HAL_OK; + } + else + { + return HAL_ERROR; + } +} + +/** + * @brief Handle EXTI interrupt request. + * @param GPIO_Pin Specifies the port pin connected to corresponding EXTI line. + * @retval None + */ +void HAL_GPIO_EXTI_IRQHandler(uint16_t GPIO_Pin) +{ + /* EXTI line interrupt detected */ + if(__HAL_GPIO_EXTI_GET_IT(GPIO_Pin) != 0x00u) + { + __HAL_GPIO_EXTI_CLEAR_IT(GPIO_Pin); + HAL_GPIO_EXTI_Callback(GPIO_Pin); + } +} + +/** + * @brief EXTI line detection callback. + * @param GPIO_Pin Specifies the port pin connected to corresponding EXTI line. + * @retval None + */ +__weak void HAL_GPIO_EXTI_Callback(uint16_t GPIO_Pin) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(GPIO_Pin); + + /* NOTE: This function should not be modified, when the callback is needed, + the HAL_GPIO_EXTI_Callback could be implemented in the user file + */ +} + +/** + * @} + */ + + +/** + * @} + */ + +#endif /* HAL_GPIO_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + diff --git a/CablePositioning_IAP_V1.0/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c b/CablePositioning_IAP_V1.0/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c index 8792005..f2a4423 100644 --- a/CablePositioning_IAP_V1.0/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c +++ b/CablePositioning_IAP_V1.0/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c @@ -1,7162 +1,7548 @@ -/** - ****************************************************************************** - * @file stm32l4xx_hal_i2c.c - * @author MCD Application Team - * @brief I2C HAL module driver. - * This file provides firmware functions to manage the following - * functionalities of the Inter Integrated Circuit (I2C) peripheral: - * + Initialization and de-initialization functions - * + IO operation functions - * + Peripheral State and Errors functions - * - ****************************************************************************** - * @attention - * - * Copyright (c) 2017 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - @verbatim - ============================================================================== - ##### How to use this driver ##### - ============================================================================== - [..] - The I2C HAL driver can be used as follows: - - (#) Declare a I2C_HandleTypeDef handle structure, for example: - I2C_HandleTypeDef hi2c; - - (#)Initialize the I2C low level resources by implementing the HAL_I2C_MspInit() API: - (##) Enable the I2Cx interface clock - (##) I2C pins configuration - (+++) Enable the clock for the I2C GPIOs - (+++) Configure I2C pins as alternate function open-drain - (##) NVIC configuration if you need to use interrupt process - (+++) Configure the I2Cx interrupt priority - (+++) Enable the NVIC I2C IRQ Channel - (##) DMA Configuration if you need to use DMA process - (+++) Declare a DMA_HandleTypeDef handle structure for - the transmit or receive channel - (+++) Enable the DMAx interface clock using - (+++) Configure the DMA handle parameters - (+++) Configure the DMA Tx or Rx channel - (+++) Associate the initialized DMA handle to the hi2c DMA Tx or Rx handle - (+++) Configure the priority and enable the NVIC for the transfer complete interrupt on - the DMA Tx or Rx channel - - (#) Configure the Communication Clock Timing, Own Address1, Master Addressing mode, Dual Addressing mode, - Own Address2, Own Address2 Mask, General call and Nostretch mode in the hi2c Init structure. - - (#) Initialize the I2C registers by calling the HAL_I2C_Init(), configures also the low level Hardware - (GPIO, CLOCK, NVIC...etc) by calling the customized HAL_I2C_MspInit(&hi2c) API. - - (#) To check if target device is ready for communication, use the function HAL_I2C_IsDeviceReady() - - (#) For I2C IO and IO MEM operations, three operation modes are available within this driver : - - *** Polling mode IO operation *** - ================================= - [..] - (+) Transmit in master mode an amount of data in blocking mode using HAL_I2C_Master_Transmit() - (+) Receive in master mode an amount of data in blocking mode using HAL_I2C_Master_Receive() - (+) Transmit in slave mode an amount of data in blocking mode using HAL_I2C_Slave_Transmit() - (+) Receive in slave mode an amount of data in blocking mode using HAL_I2C_Slave_Receive() - - *** Polling mode IO MEM operation *** - ===================================== - [..] - (+) Write an amount of data in blocking mode to a specific memory address using HAL_I2C_Mem_Write() - (+) Read an amount of data in blocking mode from a specific memory address using HAL_I2C_Mem_Read() - - - *** Interrupt mode IO operation *** - =================================== - [..] - (+) Transmit in master mode an amount of data in non-blocking mode using HAL_I2C_Master_Transmit_IT() - (+) At transmission end of transfer, HAL_I2C_MasterTxCpltCallback() is executed and users can - add their own code by customization of function pointer HAL_I2C_MasterTxCpltCallback() - (+) Receive in master mode an amount of data in non-blocking mode using HAL_I2C_Master_Receive_IT() - (+) At reception end of transfer, HAL_I2C_MasterRxCpltCallback() is executed and users can - add their own code by customization of function pointer HAL_I2C_MasterRxCpltCallback() - (+) Transmit in slave mode an amount of data in non-blocking mode using HAL_I2C_Slave_Transmit_IT() - (+) At transmission end of transfer, HAL_I2C_SlaveTxCpltCallback() is executed and users can - add their own code by customization of function pointer HAL_I2C_SlaveTxCpltCallback() - (+) Receive in slave mode an amount of data in non-blocking mode using HAL_I2C_Slave_Receive_IT() - (+) At reception end of transfer, HAL_I2C_SlaveRxCpltCallback() is executed and users can - add their own code by customization of function pointer HAL_I2C_SlaveRxCpltCallback() - (+) In case of transfer Error, HAL_I2C_ErrorCallback() function is executed and users can - add their own code by customization of function pointer HAL_I2C_ErrorCallback() - (+) Abort a master I2C process communication with Interrupt using HAL_I2C_Master_Abort_IT() - (+) End of abort process, HAL_I2C_AbortCpltCallback() is executed and users can - add their own code by customization of function pointer HAL_I2C_AbortCpltCallback() - (+) Discard a slave I2C process communication using __HAL_I2C_GENERATE_NACK() macro. - This action will inform Master to generate a Stop condition to discard the communication. - - - *** Interrupt mode or DMA mode IO sequential operation *** - ========================================================== - [..] - (@) These interfaces allow to manage a sequential transfer with a repeated start condition - when a direction change during transfer - [..] - (+) A specific option field manage the different steps of a sequential transfer - (+) Option field values are defined through I2C_XFEROPTIONS and are listed below: - (++) I2C_FIRST_AND_LAST_FRAME: No sequential usage, functional is same as associated interfaces in - no sequential mode - (++) I2C_FIRST_FRAME: Sequential usage, this option allow to manage a sequence with start condition, address - and data to transfer without a final stop condition - (++) I2C_FIRST_AND_NEXT_FRAME: Sequential usage (Master only), this option allow to manage a sequence with - start condition, address and data to transfer without a final stop condition, - an then permit a call the same master sequential interface several times - (like HAL_I2C_Master_Seq_Transmit_IT() then HAL_I2C_Master_Seq_Transmit_IT() - or HAL_I2C_Master_Seq_Transmit_DMA() then HAL_I2C_Master_Seq_Transmit_DMA()) - (++) I2C_NEXT_FRAME: Sequential usage, this option allow to manage a sequence with a restart condition, address - and with new data to transfer if the direction change or manage only the new data to - transfer - if no direction change and without a final stop condition in both cases - (++) I2C_LAST_FRAME: Sequential usage, this option allow to manage a sequance with a restart condition, address - and with new data to transfer if the direction change or manage only the new data to - transfer - if no direction change and with a final stop condition in both cases - (++) I2C_LAST_FRAME_NO_STOP: Sequential usage (Master only), this option allow to manage a restart condition - after several call of the same master sequential interface several times - (link with option I2C_FIRST_AND_NEXT_FRAME). - Usage can, transfer several bytes one by one using - HAL_I2C_Master_Seq_Transmit_IT - or HAL_I2C_Master_Seq_Receive_IT - or HAL_I2C_Master_Seq_Transmit_DMA - or HAL_I2C_Master_Seq_Receive_DMA - with option I2C_FIRST_AND_NEXT_FRAME then I2C_NEXT_FRAME. - Then usage of this option I2C_LAST_FRAME_NO_STOP at the last Transmit or - Receive sequence permit to call the opposite interface Receive or Transmit - without stopping the communication and so generate a restart condition. - (++) I2C_OTHER_FRAME: Sequential usage (Master only), this option allow to manage a restart condition after - each call of the same master sequential - interface. - Usage can, transfer several bytes one by one with a restart with slave address between - each bytes using - HAL_I2C_Master_Seq_Transmit_IT - or HAL_I2C_Master_Seq_Receive_IT - or HAL_I2C_Master_Seq_Transmit_DMA - or HAL_I2C_Master_Seq_Receive_DMA - with option I2C_FIRST_FRAME then I2C_OTHER_FRAME. - Then usage of this option I2C_OTHER_AND_LAST_FRAME at the last frame to help automatic - generation of STOP condition. - - (+) Different sequential I2C interfaces are listed below: - (++) Sequential transmit in master I2C mode an amount of data in non-blocking mode using - HAL_I2C_Master_Seq_Transmit_IT() or using HAL_I2C_Master_Seq_Transmit_DMA() - (+++) At transmission end of current frame transfer, HAL_I2C_MasterTxCpltCallback() is executed and - users can add their own code by customization of function pointer HAL_I2C_MasterTxCpltCallback() - (++) Sequential receive in master I2C mode an amount of data in non-blocking mode using - HAL_I2C_Master_Seq_Receive_IT() or using HAL_I2C_Master_Seq_Receive_DMA() - (+++) At reception end of current frame transfer, HAL_I2C_MasterRxCpltCallback() is executed and users can - add their own code by customization of function pointer HAL_I2C_MasterRxCpltCallback() - (++) Abort a master IT or DMA I2C process communication with Interrupt using HAL_I2C_Master_Abort_IT() - (+++) End of abort process, HAL_I2C_AbortCpltCallback() is executed and users can - add their own code by customization of function pointer HAL_I2C_AbortCpltCallback() - (++) Enable/disable the Address listen mode in slave I2C mode using HAL_I2C_EnableListen_IT() - HAL_I2C_DisableListen_IT() - (+++) When address slave I2C match, HAL_I2C_AddrCallback() is executed and users can - add their own code to check the Address Match Code and the transmission direction request by master - (Write/Read). - (+++) At Listen mode end HAL_I2C_ListenCpltCallback() is executed and users can - add their own code by customization of function pointer HAL_I2C_ListenCpltCallback() - (++) Sequential transmit in slave I2C mode an amount of data in non-blocking mode using - HAL_I2C_Slave_Seq_Transmit_IT() or using HAL_I2C_Slave_Seq_Transmit_DMA() - (+++) At transmission end of current frame transfer, HAL_I2C_SlaveTxCpltCallback() is executed and - users can add their own code by customization of function pointer HAL_I2C_SlaveTxCpltCallback() - (++) Sequential receive in slave I2C mode an amount of data in non-blocking mode using - HAL_I2C_Slave_Seq_Receive_IT() or using HAL_I2C_Slave_Seq_Receive_DMA() - (+++) At reception end of current frame transfer, HAL_I2C_SlaveRxCpltCallback() is executed and users can - add their own code by customization of function pointer HAL_I2C_SlaveRxCpltCallback() - (++) In case of transfer Error, HAL_I2C_ErrorCallback() function is executed and users can - add their own code by customization of function pointer HAL_I2C_ErrorCallback() - (++) Discard a slave I2C process communication using __HAL_I2C_GENERATE_NACK() macro. - This action will inform Master to generate a Stop condition to discard the communication. - - *** Interrupt mode IO MEM operation *** - ======================================= - [..] - (+) Write an amount of data in non-blocking mode with Interrupt to a specific memory address using - HAL_I2C_Mem_Write_IT() - (+) At Memory end of write transfer, HAL_I2C_MemTxCpltCallback() is executed and users can - add their own code by customization of function pointer HAL_I2C_MemTxCpltCallback() - (+) Read an amount of data in non-blocking mode with Interrupt from a specific memory address using - HAL_I2C_Mem_Read_IT() - (+) At Memory end of read transfer, HAL_I2C_MemRxCpltCallback() is executed and users can - add their own code by customization of function pointer HAL_I2C_MemRxCpltCallback() - (+) In case of transfer Error, HAL_I2C_ErrorCallback() function is executed and users can - add their own code by customization of function pointer HAL_I2C_ErrorCallback() - - *** DMA mode IO operation *** - ============================== - [..] - (+) Transmit in master mode an amount of data in non-blocking mode (DMA) using - HAL_I2C_Master_Transmit_DMA() - (+) At transmission end of transfer, HAL_I2C_MasterTxCpltCallback() is executed and users can - add their own code by customization of function pointer HAL_I2C_MasterTxCpltCallback() - (+) Receive in master mode an amount of data in non-blocking mode (DMA) using - HAL_I2C_Master_Receive_DMA() - (+) At reception end of transfer, HAL_I2C_MasterRxCpltCallback() is executed and users can - add their own code by customization of function pointer HAL_I2C_MasterRxCpltCallback() - (+) Transmit in slave mode an amount of data in non-blocking mode (DMA) using - HAL_I2C_Slave_Transmit_DMA() - (+) At transmission end of transfer, HAL_I2C_SlaveTxCpltCallback() is executed and users can - add their own code by customization of function pointer HAL_I2C_SlaveTxCpltCallback() - (+) Receive in slave mode an amount of data in non-blocking mode (DMA) using - HAL_I2C_Slave_Receive_DMA() - (+) At reception end of transfer, HAL_I2C_SlaveRxCpltCallback() is executed and users can - add their own code by customization of function pointer HAL_I2C_SlaveRxCpltCallback() - (+) In case of transfer Error, HAL_I2C_ErrorCallback() function is executed and users can - add their own code by customization of function pointer HAL_I2C_ErrorCallback() - (+) Abort a master I2C process communication with Interrupt using HAL_I2C_Master_Abort_IT() - (+) End of abort process, HAL_I2C_AbortCpltCallback() is executed and users can - add their own code by customization of function pointer HAL_I2C_AbortCpltCallback() - (+) Discard a slave I2C process communication using __HAL_I2C_GENERATE_NACK() macro. - This action will inform Master to generate a Stop condition to discard the communication. - - *** DMA mode IO MEM operation *** - ================================= - [..] - (+) Write an amount of data in non-blocking mode with DMA to a specific memory address using - HAL_I2C_Mem_Write_DMA() - (+) At Memory end of write transfer, HAL_I2C_MemTxCpltCallback() is executed and users can - add their own code by customization of function pointer HAL_I2C_MemTxCpltCallback() - (+) Read an amount of data in non-blocking mode with DMA from a specific memory address using - HAL_I2C_Mem_Read_DMA() - (+) At Memory end of read transfer, HAL_I2C_MemRxCpltCallback() is executed and users can - add their own code by customization of function pointer HAL_I2C_MemRxCpltCallback() - (+) In case of transfer Error, HAL_I2C_ErrorCallback() function is executed and users can - add their own code by customization of function pointer HAL_I2C_ErrorCallback() - - - *** I2C HAL driver macros list *** - ================================== - [..] - Below the list of most used macros in I2C HAL driver. - - (+) __HAL_I2C_ENABLE: Enable the I2C peripheral - (+) __HAL_I2C_DISABLE: Disable the I2C peripheral - (+) __HAL_I2C_GENERATE_NACK: Generate a Non-Acknowledge I2C peripheral in Slave mode - (+) __HAL_I2C_GET_FLAG: Check whether the specified I2C flag is set or not - (+) __HAL_I2C_CLEAR_FLAG: Clear the specified I2C pending flag - (+) __HAL_I2C_ENABLE_IT: Enable the specified I2C interrupt - (+) __HAL_I2C_DISABLE_IT: Disable the specified I2C interrupt - - *** Callback registration *** - ============================================= - [..] - The compilation flag USE_HAL_I2C_REGISTER_CALLBACKS when set to 1 - allows the user to configure dynamically the driver callbacks. - Use Functions HAL_I2C_RegisterCallback() or HAL_I2C_RegisterAddrCallback() - to register an interrupt callback. - [..] - Function HAL_I2C_RegisterCallback() allows to register following callbacks: - (+) MasterTxCpltCallback : callback for Master transmission end of transfer. - (+) MasterRxCpltCallback : callback for Master reception end of transfer. - (+) SlaveTxCpltCallback : callback for Slave transmission end of transfer. - (+) SlaveRxCpltCallback : callback for Slave reception end of transfer. - (+) ListenCpltCallback : callback for end of listen mode. - (+) MemTxCpltCallback : callback for Memory transmission end of transfer. - (+) MemRxCpltCallback : callback for Memory reception end of transfer. - (+) ErrorCallback : callback for error detection. - (+) AbortCpltCallback : callback for abort completion process. - (+) MspInitCallback : callback for Msp Init. - (+) MspDeInitCallback : callback for Msp DeInit. - This function takes as parameters the HAL peripheral handle, the Callback ID - and a pointer to the user callback function. - [..] - For specific callback AddrCallback use dedicated register callbacks : HAL_I2C_RegisterAddrCallback(). - [..] - Use function HAL_I2C_UnRegisterCallback to reset a callback to the default - weak function. - HAL_I2C_UnRegisterCallback takes as parameters the HAL peripheral handle, - and the Callback ID. - This function allows to reset following callbacks: - (+) MasterTxCpltCallback : callback for Master transmission end of transfer. - (+) MasterRxCpltCallback : callback for Master reception end of transfer. - (+) SlaveTxCpltCallback : callback for Slave transmission end of transfer. - (+) SlaveRxCpltCallback : callback for Slave reception end of transfer. - (+) ListenCpltCallback : callback for end of listen mode. - (+) MemTxCpltCallback : callback for Memory transmission end of transfer. - (+) MemRxCpltCallback : callback for Memory reception end of transfer. - (+) ErrorCallback : callback for error detection. - (+) AbortCpltCallback : callback for abort completion process. - (+) MspInitCallback : callback for Msp Init. - (+) MspDeInitCallback : callback for Msp DeInit. - [..] - For callback AddrCallback use dedicated register callbacks : HAL_I2C_UnRegisterAddrCallback(). - [..] - By default, after the HAL_I2C_Init() and when the state is HAL_I2C_STATE_RESET - all callbacks are set to the corresponding weak functions: - examples HAL_I2C_MasterTxCpltCallback(), HAL_I2C_MasterRxCpltCallback(). - Exception done for MspInit and MspDeInit functions that are - reset to the legacy weak functions in the HAL_I2C_Init()/ HAL_I2C_DeInit() only when - these callbacks are null (not registered beforehand). - If MspInit or MspDeInit are not null, the HAL_I2C_Init()/ HAL_I2C_DeInit() - keep and use the user MspInit/MspDeInit callbacks (registered beforehand) whatever the state. - [..] - Callbacks can be registered/unregistered in HAL_I2C_STATE_READY state only. - Exception done MspInit/MspDeInit functions that can be registered/unregistered - in HAL_I2C_STATE_READY or HAL_I2C_STATE_RESET state, - thus registered (user) MspInit/DeInit callbacks can be used during the Init/DeInit. - Then, the user first registers the MspInit/MspDeInit user callbacks - using HAL_I2C_RegisterCallback() before calling HAL_I2C_DeInit() - or HAL_I2C_Init() function. - [..] - When the compilation flag USE_HAL_I2C_REGISTER_CALLBACKS is set to 0 or - not defined, the callback registration feature is not available and all callbacks - are set to the corresponding weak functions. - - [..] - (@) You can refer to the I2C HAL driver header file for more useful macros - - @endverbatim - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32l4xx_hal.h" - -/** @addtogroup STM32L4xx_HAL_Driver - * @{ - */ - -/** @defgroup I2C I2C - * @brief I2C HAL module driver - * @{ - */ - -#ifdef HAL_I2C_MODULE_ENABLED - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ - -/** @defgroup I2C_Private_Define I2C Private Define - * @{ - */ -#define TIMING_CLEAR_MASK (0xF0FFFFFFU) /*!< I2C TIMING clear register Mask */ -#define I2C_TIMEOUT_ADDR (10000U) /*!< 10 s */ -#define I2C_TIMEOUT_BUSY (25U) /*!< 25 ms */ -#define I2C_TIMEOUT_DIR (25U) /*!< 25 ms */ -#define I2C_TIMEOUT_RXNE (25U) /*!< 25 ms */ -#define I2C_TIMEOUT_STOPF (25U) /*!< 25 ms */ -#define I2C_TIMEOUT_TC (25U) /*!< 25 ms */ -#define I2C_TIMEOUT_TCR (25U) /*!< 25 ms */ -#define I2C_TIMEOUT_TXIS (25U) /*!< 25 ms */ -#define I2C_TIMEOUT_FLAG (25U) /*!< 25 ms */ - -#define MAX_NBYTE_SIZE 255U -#define SLAVE_ADDR_SHIFT 7U -#define SLAVE_ADDR_MSK 0x06U - -/* Private define for @ref PreviousState usage */ -#define I2C_STATE_MSK ((uint32_t)((uint32_t)((uint32_t)HAL_I2C_STATE_BUSY_TX | \ - (uint32_t)HAL_I2C_STATE_BUSY_RX) & \ - (uint32_t)(~((uint32_t)HAL_I2C_STATE_READY)))) -/*!< Mask State define, keep only RX and TX bits */ -#define I2C_STATE_NONE ((uint32_t)(HAL_I2C_MODE_NONE)) -/*!< Default Value */ -#define I2C_STATE_MASTER_BUSY_TX ((uint32_t)(((uint32_t)HAL_I2C_STATE_BUSY_TX & I2C_STATE_MSK) | \ - (uint32_t)HAL_I2C_MODE_MASTER)) -/*!< Master Busy TX, combinaison of State LSB and Mode enum */ -#define I2C_STATE_MASTER_BUSY_RX ((uint32_t)(((uint32_t)HAL_I2C_STATE_BUSY_RX & I2C_STATE_MSK) | \ - (uint32_t)HAL_I2C_MODE_MASTER)) -/*!< Master Busy RX, combinaison of State LSB and Mode enum */ -#define I2C_STATE_SLAVE_BUSY_TX ((uint32_t)(((uint32_t)HAL_I2C_STATE_BUSY_TX & I2C_STATE_MSK) | \ - (uint32_t)HAL_I2C_MODE_SLAVE)) -/*!< Slave Busy TX, combinaison of State LSB and Mode enum */ -#define I2C_STATE_SLAVE_BUSY_RX ((uint32_t)(((uint32_t)HAL_I2C_STATE_BUSY_RX & I2C_STATE_MSK) | \ - (uint32_t)HAL_I2C_MODE_SLAVE)) -/*!< Slave Busy RX, combinaison of State LSB and Mode enum */ -#define I2C_STATE_MEM_BUSY_TX ((uint32_t)(((uint32_t)HAL_I2C_STATE_BUSY_TX & I2C_STATE_MSK) | \ - (uint32_t)HAL_I2C_MODE_MEM)) -/*!< Memory Busy TX, combinaison of State LSB and Mode enum */ -#define I2C_STATE_MEM_BUSY_RX ((uint32_t)(((uint32_t)HAL_I2C_STATE_BUSY_RX & I2C_STATE_MSK) | \ - (uint32_t)HAL_I2C_MODE_MEM)) -/*!< Memory Busy RX, combinaison of State LSB and Mode enum */ - - -/* Private define to centralize the enable/disable of Interrupts */ -#define I2C_XFER_TX_IT (uint16_t)(0x0001U) /*!< Bit field can be combinated with - @ref I2C_XFER_LISTEN_IT */ -#define I2C_XFER_RX_IT (uint16_t)(0x0002U) /*!< Bit field can be combinated with - @ref I2C_XFER_LISTEN_IT */ -#define I2C_XFER_LISTEN_IT (uint16_t)(0x8000U) /*!< Bit field can be combinated with @ref I2C_XFER_TX_IT - and @ref I2C_XFER_RX_IT */ - -#define I2C_XFER_ERROR_IT (uint16_t)(0x0010U) /*!< Bit definition to manage addition of global Error - and NACK treatment */ -#define I2C_XFER_CPLT_IT (uint16_t)(0x0020U) /*!< Bit definition to manage only STOP evenement */ -#define I2C_XFER_RELOAD_IT (uint16_t)(0x0040U) /*!< Bit definition to manage only Reload of NBYTE */ - -/* Private define Sequential Transfer Options default/reset value */ -#define I2C_NO_OPTION_FRAME (0xFFFF0000U) -/** - * @} - */ - -/* Private macro -------------------------------------------------------------*/ -/* Macro to get remaining data to transfer on DMA side */ -#define I2C_GET_DMA_REMAIN_DATA(__HANDLE__) __HAL_DMA_GET_COUNTER(__HANDLE__) - -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ - -/** @defgroup I2C_Private_Functions I2C Private Functions - * @{ - */ -/* Private functions to handle DMA transfer */ -static void I2C_DMAMasterTransmitCplt(DMA_HandleTypeDef *hdma); -static void I2C_DMAMasterReceiveCplt(DMA_HandleTypeDef *hdma); -static void I2C_DMASlaveTransmitCplt(DMA_HandleTypeDef *hdma); -static void I2C_DMASlaveReceiveCplt(DMA_HandleTypeDef *hdma); -static void I2C_DMAError(DMA_HandleTypeDef *hdma); -static void I2C_DMAAbort(DMA_HandleTypeDef *hdma); - -/* Private functions to handle IT transfer */ -static void I2C_ITAddrCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags); -static void I2C_ITMasterSeqCplt(I2C_HandleTypeDef *hi2c); -static void I2C_ITSlaveSeqCplt(I2C_HandleTypeDef *hi2c); -static void I2C_ITMasterCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags); -static void I2C_ITSlaveCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags); -static void I2C_ITListenCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags); -static void I2C_ITError(I2C_HandleTypeDef *hi2c, uint32_t ErrorCode); - -/* Private functions to handle IT transfer */ -static HAL_StatusTypeDef I2C_RequestMemoryWrite(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, - uint16_t MemAddress, uint16_t MemAddSize, uint32_t Timeout, - uint32_t Tickstart); -static HAL_StatusTypeDef I2C_RequestMemoryRead(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, - uint16_t MemAddress, uint16_t MemAddSize, uint32_t Timeout, - uint32_t Tickstart); - -/* Private functions for I2C transfer IRQ handler */ -static HAL_StatusTypeDef I2C_Master_ISR_IT(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, - uint32_t ITSources); -static HAL_StatusTypeDef I2C_Mem_ISR_IT(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, - uint32_t ITSources); -static HAL_StatusTypeDef I2C_Slave_ISR_IT(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, - uint32_t ITSources); -static HAL_StatusTypeDef I2C_Master_ISR_DMA(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, - uint32_t ITSources); -static HAL_StatusTypeDef I2C_Mem_ISR_DMA(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, - uint32_t ITSources); -static HAL_StatusTypeDef I2C_Slave_ISR_DMA(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, - uint32_t ITSources); - -/* Private functions to handle flags during polling transfer */ -static HAL_StatusTypeDef I2C_WaitOnFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Flag, FlagStatus Status, - uint32_t Timeout, uint32_t Tickstart); -static HAL_StatusTypeDef I2C_WaitOnTXISFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout, - uint32_t Tickstart); -static HAL_StatusTypeDef I2C_WaitOnRXNEFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout, - uint32_t Tickstart); -static HAL_StatusTypeDef I2C_WaitOnSTOPFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout, - uint32_t Tickstart); -static HAL_StatusTypeDef I2C_IsErrorOccurred(I2C_HandleTypeDef *hi2c, uint32_t Timeout, - uint32_t Tickstart); - -/* Private functions to centralize the enable/disable of Interrupts */ -static void I2C_Enable_IRQ(I2C_HandleTypeDef *hi2c, uint16_t InterruptRequest); -static void I2C_Disable_IRQ(I2C_HandleTypeDef *hi2c, uint16_t InterruptRequest); - -/* Private function to treat different error callback */ -static void I2C_TreatErrorCallback(I2C_HandleTypeDef *hi2c); - -/* Private function to flush TXDR register */ -static void I2C_Flush_TXDR(I2C_HandleTypeDef *hi2c); - -/* Private function to handle start, restart or stop a transfer */ -static void I2C_TransferConfig(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t Size, uint32_t Mode, - uint32_t Request); - -/* Private function to Convert Specific options */ -static void I2C_ConvertOtherXferOptions(I2C_HandleTypeDef *hi2c); -/** - * @} - */ - -/* Exported functions --------------------------------------------------------*/ - -/** @defgroup I2C_Exported_Functions I2C Exported Functions - * @{ - */ - -/** @defgroup I2C_Exported_Functions_Group1 Initialization and de-initialization functions - * @brief Initialization and Configuration functions - * -@verbatim - =============================================================================== - ##### Initialization and de-initialization functions ##### - =============================================================================== - [..] This subsection provides a set of functions allowing to initialize and - deinitialize the I2Cx peripheral: - - (+) User must Implement HAL_I2C_MspInit() function in which he configures - all related peripherals resources (CLOCK, GPIO, DMA, IT and NVIC ). - - (+) Call the function HAL_I2C_Init() to configure the selected device with - the selected configuration: - (++) Clock Timing - (++) Own Address 1 - (++) Addressing mode (Master, Slave) - (++) Dual Addressing mode - (++) Own Address 2 - (++) Own Address 2 Mask - (++) General call mode - (++) Nostretch mode - - (+) Call the function HAL_I2C_DeInit() to restore the default configuration - of the selected I2Cx peripheral. - -@endverbatim - * @{ - */ - -/** - * @brief Initializes the I2C according to the specified parameters - * in the I2C_InitTypeDef and initialize the associated handle. - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2C_Init(I2C_HandleTypeDef *hi2c) -{ - /* Check the I2C handle allocation */ - if (hi2c == NULL) - { - return HAL_ERROR; - } - - /* Check the parameters */ - assert_param(IS_I2C_ALL_INSTANCE(hi2c->Instance)); - assert_param(IS_I2C_OWN_ADDRESS1(hi2c->Init.OwnAddress1)); - assert_param(IS_I2C_ADDRESSING_MODE(hi2c->Init.AddressingMode)); - assert_param(IS_I2C_DUAL_ADDRESS(hi2c->Init.DualAddressMode)); - assert_param(IS_I2C_OWN_ADDRESS2(hi2c->Init.OwnAddress2)); - assert_param(IS_I2C_OWN_ADDRESS2_MASK(hi2c->Init.OwnAddress2Masks)); - assert_param(IS_I2C_GENERAL_CALL(hi2c->Init.GeneralCallMode)); - assert_param(IS_I2C_NO_STRETCH(hi2c->Init.NoStretchMode)); - - if (hi2c->State == HAL_I2C_STATE_RESET) - { - /* Allocate lock resource and initialize it */ - hi2c->Lock = HAL_UNLOCKED; - -#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) - /* Init the I2C Callback settings */ - hi2c->MasterTxCpltCallback = HAL_I2C_MasterTxCpltCallback; /* Legacy weak MasterTxCpltCallback */ - hi2c->MasterRxCpltCallback = HAL_I2C_MasterRxCpltCallback; /* Legacy weak MasterRxCpltCallback */ - hi2c->SlaveTxCpltCallback = HAL_I2C_SlaveTxCpltCallback; /* Legacy weak SlaveTxCpltCallback */ - hi2c->SlaveRxCpltCallback = HAL_I2C_SlaveRxCpltCallback; /* Legacy weak SlaveRxCpltCallback */ - hi2c->ListenCpltCallback = HAL_I2C_ListenCpltCallback; /* Legacy weak ListenCpltCallback */ - hi2c->MemTxCpltCallback = HAL_I2C_MemTxCpltCallback; /* Legacy weak MemTxCpltCallback */ - hi2c->MemRxCpltCallback = HAL_I2C_MemRxCpltCallback; /* Legacy weak MemRxCpltCallback */ - hi2c->ErrorCallback = HAL_I2C_ErrorCallback; /* Legacy weak ErrorCallback */ - hi2c->AbortCpltCallback = HAL_I2C_AbortCpltCallback; /* Legacy weak AbortCpltCallback */ - hi2c->AddrCallback = HAL_I2C_AddrCallback; /* Legacy weak AddrCallback */ - - if (hi2c->MspInitCallback == NULL) - { - hi2c->MspInitCallback = HAL_I2C_MspInit; /* Legacy weak MspInit */ - } - - /* Init the low level hardware : GPIO, CLOCK, CORTEX...etc */ - hi2c->MspInitCallback(hi2c); -#else - /* Init the low level hardware : GPIO, CLOCK, CORTEX...etc */ - HAL_I2C_MspInit(hi2c); -#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ - } - - hi2c->State = HAL_I2C_STATE_BUSY; - - /* Disable the selected I2C peripheral */ - __HAL_I2C_DISABLE(hi2c); - - /*---------------------------- I2Cx TIMINGR Configuration ------------------*/ - /* Configure I2Cx: Frequency range */ - hi2c->Instance->TIMINGR = hi2c->Init.Timing & TIMING_CLEAR_MASK; - - /*---------------------------- I2Cx OAR1 Configuration ---------------------*/ - /* Disable Own Address1 before set the Own Address1 configuration */ - hi2c->Instance->OAR1 &= ~I2C_OAR1_OA1EN; - - /* Configure I2Cx: Own Address1 and ack own address1 mode */ - if (hi2c->Init.AddressingMode == I2C_ADDRESSINGMODE_7BIT) - { - hi2c->Instance->OAR1 = (I2C_OAR1_OA1EN | hi2c->Init.OwnAddress1); - } - else /* I2C_ADDRESSINGMODE_10BIT */ - { - hi2c->Instance->OAR1 = (I2C_OAR1_OA1EN | I2C_OAR1_OA1MODE | hi2c->Init.OwnAddress1); - } - - /*---------------------------- I2Cx CR2 Configuration ----------------------*/ - /* Configure I2Cx: Addressing Master mode */ - if (hi2c->Init.AddressingMode == I2C_ADDRESSINGMODE_10BIT) - { - hi2c->Instance->CR2 = (I2C_CR2_ADD10); - } - /* Enable the AUTOEND by default, and enable NACK (should be disable only during Slave process */ - hi2c->Instance->CR2 |= (I2C_CR2_AUTOEND | I2C_CR2_NACK); - - /*---------------------------- I2Cx OAR2 Configuration ---------------------*/ - /* Disable Own Address2 before set the Own Address2 configuration */ - hi2c->Instance->OAR2 &= ~I2C_DUALADDRESS_ENABLE; - - /* Configure I2Cx: Dual mode and Own Address2 */ - hi2c->Instance->OAR2 = (hi2c->Init.DualAddressMode | hi2c->Init.OwnAddress2 | \ - (hi2c->Init.OwnAddress2Masks << 8)); - - /*---------------------------- I2Cx CR1 Configuration ----------------------*/ - /* Configure I2Cx: Generalcall and NoStretch mode */ - hi2c->Instance->CR1 = (hi2c->Init.GeneralCallMode | hi2c->Init.NoStretchMode); - - /* Enable the selected I2C peripheral */ - __HAL_I2C_ENABLE(hi2c); - - hi2c->ErrorCode = HAL_I2C_ERROR_NONE; - hi2c->State = HAL_I2C_STATE_READY; - hi2c->PreviousState = I2C_STATE_NONE; - hi2c->Mode = HAL_I2C_MODE_NONE; - - return HAL_OK; -} - -/** - * @brief DeInitialize the I2C peripheral. - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2C_DeInit(I2C_HandleTypeDef *hi2c) -{ - /* Check the I2C handle allocation */ - if (hi2c == NULL) - { - return HAL_ERROR; - } - - /* Check the parameters */ - assert_param(IS_I2C_ALL_INSTANCE(hi2c->Instance)); - - hi2c->State = HAL_I2C_STATE_BUSY; - - /* Disable the I2C Peripheral Clock */ - __HAL_I2C_DISABLE(hi2c); - -#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) - if (hi2c->MspDeInitCallback == NULL) - { - hi2c->MspDeInitCallback = HAL_I2C_MspDeInit; /* Legacy weak MspDeInit */ - } - - /* DeInit the low level hardware: GPIO, CLOCK, NVIC */ - hi2c->MspDeInitCallback(hi2c); -#else - /* DeInit the low level hardware: GPIO, CLOCK, NVIC */ - HAL_I2C_MspDeInit(hi2c); -#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ - - hi2c->ErrorCode = HAL_I2C_ERROR_NONE; - hi2c->State = HAL_I2C_STATE_RESET; - hi2c->PreviousState = I2C_STATE_NONE; - hi2c->Mode = HAL_I2C_MODE_NONE; - - /* Release Lock */ - __HAL_UNLOCK(hi2c); - - return HAL_OK; -} - -/** - * @brief Initialize the I2C MSP. - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @retval None - */ -__weak void HAL_I2C_MspInit(I2C_HandleTypeDef *hi2c) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hi2c); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_I2C_MspInit could be implemented in the user file - */ -} - -/** - * @brief DeInitialize the I2C MSP. - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @retval None - */ -__weak void HAL_I2C_MspDeInit(I2C_HandleTypeDef *hi2c) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hi2c); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_I2C_MspDeInit could be implemented in the user file - */ -} - -#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) -/** - * @brief Register a User I2C Callback - * To be used instead of the weak predefined callback - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @param CallbackID ID of the callback to be registered - * This parameter can be one of the following values: - * @arg @ref HAL_I2C_MASTER_TX_COMPLETE_CB_ID Master Tx Transfer completed callback ID - * @arg @ref HAL_I2C_MASTER_RX_COMPLETE_CB_ID Master Rx Transfer completed callback ID - * @arg @ref HAL_I2C_SLAVE_TX_COMPLETE_CB_ID Slave Tx Transfer completed callback ID - * @arg @ref HAL_I2C_SLAVE_RX_COMPLETE_CB_ID Slave Rx Transfer completed callback ID - * @arg @ref HAL_I2C_LISTEN_COMPLETE_CB_ID Listen Complete callback ID - * @arg @ref HAL_I2C_MEM_TX_COMPLETE_CB_ID Memory Tx Transfer callback ID - * @arg @ref HAL_I2C_MEM_RX_COMPLETE_CB_ID Memory Rx Transfer completed callback ID - * @arg @ref HAL_I2C_ERROR_CB_ID Error callback ID - * @arg @ref HAL_I2C_ABORT_CB_ID Abort callback ID - * @arg @ref HAL_I2C_MSPINIT_CB_ID MspInit callback ID - * @arg @ref HAL_I2C_MSPDEINIT_CB_ID MspDeInit callback ID - * @param pCallback pointer to the Callback function - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2C_RegisterCallback(I2C_HandleTypeDef *hi2c, HAL_I2C_CallbackIDTypeDef CallbackID, - pI2C_CallbackTypeDef pCallback) -{ - HAL_StatusTypeDef status = HAL_OK; - - if (pCallback == NULL) - { - /* Update the error code */ - hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK; - - return HAL_ERROR; - } - /* Process locked */ - __HAL_LOCK(hi2c); - - if (HAL_I2C_STATE_READY == hi2c->State) - { - switch (CallbackID) - { - case HAL_I2C_MASTER_TX_COMPLETE_CB_ID : - hi2c->MasterTxCpltCallback = pCallback; - break; - - case HAL_I2C_MASTER_RX_COMPLETE_CB_ID : - hi2c->MasterRxCpltCallback = pCallback; - break; - - case HAL_I2C_SLAVE_TX_COMPLETE_CB_ID : - hi2c->SlaveTxCpltCallback = pCallback; - break; - - case HAL_I2C_SLAVE_RX_COMPLETE_CB_ID : - hi2c->SlaveRxCpltCallback = pCallback; - break; - - case HAL_I2C_LISTEN_COMPLETE_CB_ID : - hi2c->ListenCpltCallback = pCallback; - break; - - case HAL_I2C_MEM_TX_COMPLETE_CB_ID : - hi2c->MemTxCpltCallback = pCallback; - break; - - case HAL_I2C_MEM_RX_COMPLETE_CB_ID : - hi2c->MemRxCpltCallback = pCallback; - break; - - case HAL_I2C_ERROR_CB_ID : - hi2c->ErrorCallback = pCallback; - break; - - case HAL_I2C_ABORT_CB_ID : - hi2c->AbortCpltCallback = pCallback; - break; - - case HAL_I2C_MSPINIT_CB_ID : - hi2c->MspInitCallback = pCallback; - break; - - case HAL_I2C_MSPDEINIT_CB_ID : - hi2c->MspDeInitCallback = pCallback; - break; - - default : - /* Update the error code */ - hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK; - - /* Return error status */ - status = HAL_ERROR; - break; - } - } - else if (HAL_I2C_STATE_RESET == hi2c->State) - { - switch (CallbackID) - { - case HAL_I2C_MSPINIT_CB_ID : - hi2c->MspInitCallback = pCallback; - break; - - case HAL_I2C_MSPDEINIT_CB_ID : - hi2c->MspDeInitCallback = pCallback; - break; - - default : - /* Update the error code */ - hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK; - - /* Return error status */ - status = HAL_ERROR; - break; - } - } - else - { - /* Update the error code */ - hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK; - - /* Return error status */ - status = HAL_ERROR; - } - - /* Release Lock */ - __HAL_UNLOCK(hi2c); - return status; -} - -/** - * @brief Unregister an I2C Callback - * I2C callback is redirected to the weak predefined callback - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @param CallbackID ID of the callback to be unregistered - * This parameter can be one of the following values: - * This parameter can be one of the following values: - * @arg @ref HAL_I2C_MASTER_TX_COMPLETE_CB_ID Master Tx Transfer completed callback ID - * @arg @ref HAL_I2C_MASTER_RX_COMPLETE_CB_ID Master Rx Transfer completed callback ID - * @arg @ref HAL_I2C_SLAVE_TX_COMPLETE_CB_ID Slave Tx Transfer completed callback ID - * @arg @ref HAL_I2C_SLAVE_RX_COMPLETE_CB_ID Slave Rx Transfer completed callback ID - * @arg @ref HAL_I2C_LISTEN_COMPLETE_CB_ID Listen Complete callback ID - * @arg @ref HAL_I2C_MEM_TX_COMPLETE_CB_ID Memory Tx Transfer callback ID - * @arg @ref HAL_I2C_MEM_RX_COMPLETE_CB_ID Memory Rx Transfer completed callback ID - * @arg @ref HAL_I2C_ERROR_CB_ID Error callback ID - * @arg @ref HAL_I2C_ABORT_CB_ID Abort callback ID - * @arg @ref HAL_I2C_MSPINIT_CB_ID MspInit callback ID - * @arg @ref HAL_I2C_MSPDEINIT_CB_ID MspDeInit callback ID - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2C_UnRegisterCallback(I2C_HandleTypeDef *hi2c, HAL_I2C_CallbackIDTypeDef CallbackID) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Process locked */ - __HAL_LOCK(hi2c); - - if (HAL_I2C_STATE_READY == hi2c->State) - { - switch (CallbackID) - { - case HAL_I2C_MASTER_TX_COMPLETE_CB_ID : - hi2c->MasterTxCpltCallback = HAL_I2C_MasterTxCpltCallback; /* Legacy weak MasterTxCpltCallback */ - break; - - case HAL_I2C_MASTER_RX_COMPLETE_CB_ID : - hi2c->MasterRxCpltCallback = HAL_I2C_MasterRxCpltCallback; /* Legacy weak MasterRxCpltCallback */ - break; - - case HAL_I2C_SLAVE_TX_COMPLETE_CB_ID : - hi2c->SlaveTxCpltCallback = HAL_I2C_SlaveTxCpltCallback; /* Legacy weak SlaveTxCpltCallback */ - break; - - case HAL_I2C_SLAVE_RX_COMPLETE_CB_ID : - hi2c->SlaveRxCpltCallback = HAL_I2C_SlaveRxCpltCallback; /* Legacy weak SlaveRxCpltCallback */ - break; - - case HAL_I2C_LISTEN_COMPLETE_CB_ID : - hi2c->ListenCpltCallback = HAL_I2C_ListenCpltCallback; /* Legacy weak ListenCpltCallback */ - break; - - case HAL_I2C_MEM_TX_COMPLETE_CB_ID : - hi2c->MemTxCpltCallback = HAL_I2C_MemTxCpltCallback; /* Legacy weak MemTxCpltCallback */ - break; - - case HAL_I2C_MEM_RX_COMPLETE_CB_ID : - hi2c->MemRxCpltCallback = HAL_I2C_MemRxCpltCallback; /* Legacy weak MemRxCpltCallback */ - break; - - case HAL_I2C_ERROR_CB_ID : - hi2c->ErrorCallback = HAL_I2C_ErrorCallback; /* Legacy weak ErrorCallback */ - break; - - case HAL_I2C_ABORT_CB_ID : - hi2c->AbortCpltCallback = HAL_I2C_AbortCpltCallback; /* Legacy weak AbortCpltCallback */ - break; - - case HAL_I2C_MSPINIT_CB_ID : - hi2c->MspInitCallback = HAL_I2C_MspInit; /* Legacy weak MspInit */ - break; - - case HAL_I2C_MSPDEINIT_CB_ID : - hi2c->MspDeInitCallback = HAL_I2C_MspDeInit; /* Legacy weak MspDeInit */ - break; - - default : - /* Update the error code */ - hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK; - - /* Return error status */ - status = HAL_ERROR; - break; - } - } - else if (HAL_I2C_STATE_RESET == hi2c->State) - { - switch (CallbackID) - { - case HAL_I2C_MSPINIT_CB_ID : - hi2c->MspInitCallback = HAL_I2C_MspInit; /* Legacy weak MspInit */ - break; - - case HAL_I2C_MSPDEINIT_CB_ID : - hi2c->MspDeInitCallback = HAL_I2C_MspDeInit; /* Legacy weak MspDeInit */ - break; - - default : - /* Update the error code */ - hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK; - - /* Return error status */ - status = HAL_ERROR; - break; - } - } - else - { - /* Update the error code */ - hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK; - - /* Return error status */ - status = HAL_ERROR; - } - - /* Release Lock */ - __HAL_UNLOCK(hi2c); - return status; -} - -/** - * @brief Register the Slave Address Match I2C Callback - * To be used instead of the weak HAL_I2C_AddrCallback() predefined callback - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @param pCallback pointer to the Address Match Callback function - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2C_RegisterAddrCallback(I2C_HandleTypeDef *hi2c, pI2C_AddrCallbackTypeDef pCallback) -{ - HAL_StatusTypeDef status = HAL_OK; - - if (pCallback == NULL) - { - /* Update the error code */ - hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK; - - return HAL_ERROR; - } - /* Process locked */ - __HAL_LOCK(hi2c); - - if (HAL_I2C_STATE_READY == hi2c->State) - { - hi2c->AddrCallback = pCallback; - } - else - { - /* Update the error code */ - hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK; - - /* Return error status */ - status = HAL_ERROR; - } - - /* Release Lock */ - __HAL_UNLOCK(hi2c); - return status; -} - -/** - * @brief UnRegister the Slave Address Match I2C Callback - * Info Ready I2C Callback is redirected to the weak HAL_I2C_AddrCallback() predefined callback - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2C_UnRegisterAddrCallback(I2C_HandleTypeDef *hi2c) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Process locked */ - __HAL_LOCK(hi2c); - - if (HAL_I2C_STATE_READY == hi2c->State) - { - hi2c->AddrCallback = HAL_I2C_AddrCallback; /* Legacy weak AddrCallback */ - } - else - { - /* Update the error code */ - hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK; - - /* Return error status */ - status = HAL_ERROR; - } - - /* Release Lock */ - __HAL_UNLOCK(hi2c); - return status; -} - -#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ - -/** - * @} - */ - -/** @defgroup I2C_Exported_Functions_Group2 Input and Output operation functions - * @brief Data transfers functions - * -@verbatim - =============================================================================== - ##### IO operation functions ##### - =============================================================================== - [..] - This subsection provides a set of functions allowing to manage the I2C data - transfers. - - (#) There are two modes of transfer: - (++) Blocking mode : The communication is performed in the polling mode. - The status of all data processing is returned by the same function - after finishing transfer. - (++) No-Blocking mode : The communication is performed using Interrupts - or DMA. These functions return the status of the transfer startup. - The end of the data processing will be indicated through the - dedicated I2C IRQ when using Interrupt mode or the DMA IRQ when - using DMA mode. - - (#) Blocking mode functions are : - (++) HAL_I2C_Master_Transmit() - (++) HAL_I2C_Master_Receive() - (++) HAL_I2C_Slave_Transmit() - (++) HAL_I2C_Slave_Receive() - (++) HAL_I2C_Mem_Write() - (++) HAL_I2C_Mem_Read() - (++) HAL_I2C_IsDeviceReady() - - (#) No-Blocking mode functions with Interrupt are : - (++) HAL_I2C_Master_Transmit_IT() - (++) HAL_I2C_Master_Receive_IT() - (++) HAL_I2C_Slave_Transmit_IT() - (++) HAL_I2C_Slave_Receive_IT() - (++) HAL_I2C_Mem_Write_IT() - (++) HAL_I2C_Mem_Read_IT() - (++) HAL_I2C_Master_Seq_Transmit_IT() - (++) HAL_I2C_Master_Seq_Receive_IT() - (++) HAL_I2C_Slave_Seq_Transmit_IT() - (++) HAL_I2C_Slave_Seq_Receive_IT() - (++) HAL_I2C_EnableListen_IT() - (++) HAL_I2C_DisableListen_IT() - (++) HAL_I2C_Master_Abort_IT() - - (#) No-Blocking mode functions with DMA are : - (++) HAL_I2C_Master_Transmit_DMA() - (++) HAL_I2C_Master_Receive_DMA() - (++) HAL_I2C_Slave_Transmit_DMA() - (++) HAL_I2C_Slave_Receive_DMA() - (++) HAL_I2C_Mem_Write_DMA() - (++) HAL_I2C_Mem_Read_DMA() - (++) HAL_I2C_Master_Seq_Transmit_DMA() - (++) HAL_I2C_Master_Seq_Receive_DMA() - (++) HAL_I2C_Slave_Seq_Transmit_DMA() - (++) HAL_I2C_Slave_Seq_Receive_DMA() - - (#) A set of Transfer Complete Callbacks are provided in non Blocking mode: - (++) HAL_I2C_MasterTxCpltCallback() - (++) HAL_I2C_MasterRxCpltCallback() - (++) HAL_I2C_SlaveTxCpltCallback() - (++) HAL_I2C_SlaveRxCpltCallback() - (++) HAL_I2C_MemTxCpltCallback() - (++) HAL_I2C_MemRxCpltCallback() - (++) HAL_I2C_AddrCallback() - (++) HAL_I2C_ListenCpltCallback() - (++) HAL_I2C_ErrorCallback() - (++) HAL_I2C_AbortCpltCallback() - -@endverbatim - * @{ - */ - -/** - * @brief Transmits in master mode an amount of data in blocking mode. - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @param DevAddress Target device address: The device 7 bits address value - * in datasheet must be shifted to the left before calling the interface - * @param pData Pointer to data buffer - * @param Size Amount of data to be sent - * @param Timeout Timeout duration - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2C_Master_Transmit(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, - uint16_t Size, uint32_t Timeout) -{ - uint32_t tickstart; - - if (hi2c->State == HAL_I2C_STATE_READY) - { - /* Process Locked */ - __HAL_LOCK(hi2c); - - /* Init tickstart for timeout management*/ - tickstart = HAL_GetTick(); - - if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY, tickstart) != HAL_OK) - { - return HAL_ERROR; - } - - hi2c->State = HAL_I2C_STATE_BUSY_TX; - hi2c->Mode = HAL_I2C_MODE_MASTER; - hi2c->ErrorCode = HAL_I2C_ERROR_NONE; - - /* Prepare transfer parameters */ - hi2c->pBuffPtr = pData; - hi2c->XferCount = Size; - hi2c->XferISR = NULL; - - /* Send Slave Address */ - /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */ - if (hi2c->XferCount > MAX_NBYTE_SIZE) - { - hi2c->XferSize = MAX_NBYTE_SIZE; - I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_RELOAD_MODE, - I2C_GENERATE_START_WRITE); - } - else - { - hi2c->XferSize = hi2c->XferCount; - I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, - I2C_GENERATE_START_WRITE); - } - - while (hi2c->XferCount > 0U) - { - /* Wait until TXIS flag is set */ - if (I2C_WaitOnTXISFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) - { - return HAL_ERROR; - } - /* Write data to TXDR */ - hi2c->Instance->TXDR = *hi2c->pBuffPtr; - - /* Increment Buffer pointer */ - hi2c->pBuffPtr++; - - hi2c->XferCount--; - hi2c->XferSize--; - - if ((hi2c->XferCount != 0U) && (hi2c->XferSize == 0U)) - { - /* Wait until TCR flag is set */ - if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TCR, RESET, Timeout, tickstart) != HAL_OK) - { - return HAL_ERROR; - } - - if (hi2c->XferCount > MAX_NBYTE_SIZE) - { - hi2c->XferSize = MAX_NBYTE_SIZE; - I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_RELOAD_MODE, - I2C_NO_STARTSTOP); - } - else - { - hi2c->XferSize = hi2c->XferCount; - I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, - I2C_NO_STARTSTOP); - } - } - } - - /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */ - /* Wait until STOPF flag is set */ - if (I2C_WaitOnSTOPFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) - { - return HAL_ERROR; - } - - /* Clear STOP Flag */ - __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); - - /* Clear Configuration Register 2 */ - I2C_RESET_CR2(hi2c); - - hi2c->State = HAL_I2C_STATE_READY; - hi2c->Mode = HAL_I2C_MODE_NONE; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Receives in master mode an amount of data in blocking mode. - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @param DevAddress Target device address: The device 7 bits address value - * in datasheet must be shifted to the left before calling the interface - * @param pData Pointer to data buffer - * @param Size Amount of data to be sent - * @param Timeout Timeout duration - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2C_Master_Receive(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, - uint16_t Size, uint32_t Timeout) -{ - uint32_t tickstart; - - if (hi2c->State == HAL_I2C_STATE_READY) - { - /* Process Locked */ - __HAL_LOCK(hi2c); - - /* Init tickstart for timeout management*/ - tickstart = HAL_GetTick(); - - if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY, tickstart) != HAL_OK) - { - return HAL_ERROR; - } - - hi2c->State = HAL_I2C_STATE_BUSY_RX; - hi2c->Mode = HAL_I2C_MODE_MASTER; - hi2c->ErrorCode = HAL_I2C_ERROR_NONE; - - /* Prepare transfer parameters */ - hi2c->pBuffPtr = pData; - hi2c->XferCount = Size; - hi2c->XferISR = NULL; - - /* Send Slave Address */ - /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */ - if (hi2c->XferCount > MAX_NBYTE_SIZE) - { - hi2c->XferSize = MAX_NBYTE_SIZE; - I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_RELOAD_MODE, - I2C_GENERATE_START_READ); - } - else - { - hi2c->XferSize = hi2c->XferCount; - I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, - I2C_GENERATE_START_READ); - } - - while (hi2c->XferCount > 0U) - { - /* Wait until RXNE flag is set */ - if (I2C_WaitOnRXNEFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) - { - return HAL_ERROR; - } - - /* Read data from RXDR */ - *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->RXDR; - - /* Increment Buffer pointer */ - hi2c->pBuffPtr++; - - hi2c->XferSize--; - hi2c->XferCount--; - - if ((hi2c->XferCount != 0U) && (hi2c->XferSize == 0U)) - { - /* Wait until TCR flag is set */ - if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TCR, RESET, Timeout, tickstart) != HAL_OK) - { - return HAL_ERROR; - } - - if (hi2c->XferCount > MAX_NBYTE_SIZE) - { - hi2c->XferSize = MAX_NBYTE_SIZE; - I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_RELOAD_MODE, - I2C_NO_STARTSTOP); - } - else - { - hi2c->XferSize = hi2c->XferCount; - I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, - I2C_NO_STARTSTOP); - } - } - } - - /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */ - /* Wait until STOPF flag is set */ - if (I2C_WaitOnSTOPFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) - { - return HAL_ERROR; - } - - /* Clear STOP Flag */ - __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); - - /* Clear Configuration Register 2 */ - I2C_RESET_CR2(hi2c); - - hi2c->State = HAL_I2C_STATE_READY; - hi2c->Mode = HAL_I2C_MODE_NONE; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Transmits in slave mode an amount of data in blocking mode. - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @param pData Pointer to data buffer - * @param Size Amount of data to be sent - * @param Timeout Timeout duration - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2C_Slave_Transmit(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, - uint32_t Timeout) -{ - uint32_t tickstart; - - if (hi2c->State == HAL_I2C_STATE_READY) - { - if ((pData == NULL) || (Size == 0U)) - { - hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; - return HAL_ERROR; - } - /* Process Locked */ - __HAL_LOCK(hi2c); - - /* Init tickstart for timeout management*/ - tickstart = HAL_GetTick(); - - hi2c->State = HAL_I2C_STATE_BUSY_TX; - hi2c->Mode = HAL_I2C_MODE_SLAVE; - hi2c->ErrorCode = HAL_I2C_ERROR_NONE; - - /* Prepare transfer parameters */ - hi2c->pBuffPtr = pData; - hi2c->XferCount = Size; - hi2c->XferISR = NULL; - - /* Enable Address Acknowledge */ - hi2c->Instance->CR2 &= ~I2C_CR2_NACK; - - /* Wait until ADDR flag is set */ - if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_ADDR, RESET, Timeout, tickstart) != HAL_OK) - { - /* Disable Address Acknowledge */ - hi2c->Instance->CR2 |= I2C_CR2_NACK; - return HAL_ERROR; - } - - /* Clear ADDR flag */ - __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR); - - /* If 10bit addressing mode is selected */ - if (hi2c->Init.AddressingMode == I2C_ADDRESSINGMODE_10BIT) - { - /* Wait until ADDR flag is set */ - if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_ADDR, RESET, Timeout, tickstart) != HAL_OK) - { - /* Disable Address Acknowledge */ - hi2c->Instance->CR2 |= I2C_CR2_NACK; - return HAL_ERROR; - } - - /* Clear ADDR flag */ - __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR); - } - - /* Wait until DIR flag is set Transmitter mode */ - if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_DIR, RESET, Timeout, tickstart) != HAL_OK) - { - /* Disable Address Acknowledge */ - hi2c->Instance->CR2 |= I2C_CR2_NACK; - return HAL_ERROR; - } - - while (hi2c->XferCount > 0U) - { - /* Wait until TXIS flag is set */ - if (I2C_WaitOnTXISFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) - { - /* Disable Address Acknowledge */ - hi2c->Instance->CR2 |= I2C_CR2_NACK; - return HAL_ERROR; - } - - /* Write data to TXDR */ - hi2c->Instance->TXDR = *hi2c->pBuffPtr; - - /* Increment Buffer pointer */ - hi2c->pBuffPtr++; - - hi2c->XferCount--; - } - - /* Wait until AF flag is set */ - if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_AF, RESET, Timeout, tickstart) != HAL_OK) - { - /* Disable Address Acknowledge */ - hi2c->Instance->CR2 |= I2C_CR2_NACK; - return HAL_ERROR; - } - - /* Flush TX register */ - I2C_Flush_TXDR(hi2c); - - /* Clear AF flag */ - __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); - - /* Wait until STOP flag is set */ - if (I2C_WaitOnSTOPFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) - { - /* Disable Address Acknowledge */ - hi2c->Instance->CR2 |= I2C_CR2_NACK; - - return HAL_ERROR; - } - - /* Clear STOP flag */ - __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); - - /* Wait until BUSY flag is reset */ - if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, Timeout, tickstart) != HAL_OK) - { - /* Disable Address Acknowledge */ - hi2c->Instance->CR2 |= I2C_CR2_NACK; - return HAL_ERROR; - } - - /* Disable Address Acknowledge */ - hi2c->Instance->CR2 |= I2C_CR2_NACK; - - hi2c->State = HAL_I2C_STATE_READY; - hi2c->Mode = HAL_I2C_MODE_NONE; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Receive in slave mode an amount of data in blocking mode - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @param pData Pointer to data buffer - * @param Size Amount of data to be sent - * @param Timeout Timeout duration - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2C_Slave_Receive(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, - uint32_t Timeout) -{ - uint32_t tickstart; - - if (hi2c->State == HAL_I2C_STATE_READY) - { - if ((pData == NULL) || (Size == 0U)) - { - hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; - return HAL_ERROR; - } - /* Process Locked */ - __HAL_LOCK(hi2c); - - /* Init tickstart for timeout management*/ - tickstart = HAL_GetTick(); - - hi2c->State = HAL_I2C_STATE_BUSY_RX; - hi2c->Mode = HAL_I2C_MODE_SLAVE; - hi2c->ErrorCode = HAL_I2C_ERROR_NONE; - - /* Prepare transfer parameters */ - hi2c->pBuffPtr = pData; - hi2c->XferCount = Size; - hi2c->XferSize = hi2c->XferCount; - hi2c->XferISR = NULL; - - /* Enable Address Acknowledge */ - hi2c->Instance->CR2 &= ~I2C_CR2_NACK; - - /* Wait until ADDR flag is set */ - if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_ADDR, RESET, Timeout, tickstart) != HAL_OK) - { - /* Disable Address Acknowledge */ - hi2c->Instance->CR2 |= I2C_CR2_NACK; - return HAL_ERROR; - } - - /* Clear ADDR flag */ - __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR); - - /* Wait until DIR flag is reset Receiver mode */ - if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_DIR, SET, Timeout, tickstart) != HAL_OK) - { - /* Disable Address Acknowledge */ - hi2c->Instance->CR2 |= I2C_CR2_NACK; - return HAL_ERROR; - } - - while (hi2c->XferCount > 0U) - { - /* Wait until RXNE flag is set */ - if (I2C_WaitOnRXNEFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) - { - /* Disable Address Acknowledge */ - hi2c->Instance->CR2 |= I2C_CR2_NACK; - - /* Store Last receive data if any */ - if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_RXNE) == SET) - { - /* Read data from RXDR */ - *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->RXDR; - - /* Increment Buffer pointer */ - hi2c->pBuffPtr++; - - hi2c->XferCount--; - hi2c->XferSize--; - } - - return HAL_ERROR; - } - - /* Read data from RXDR */ - *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->RXDR; - - /* Increment Buffer pointer */ - hi2c->pBuffPtr++; - - hi2c->XferCount--; - hi2c->XferSize--; - } - - /* Wait until STOP flag is set */ - if (I2C_WaitOnSTOPFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) - { - /* Disable Address Acknowledge */ - hi2c->Instance->CR2 |= I2C_CR2_NACK; - return HAL_ERROR; - } - - /* Clear STOP flag */ - __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); - - /* Wait until BUSY flag is reset */ - if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, Timeout, tickstart) != HAL_OK) - { - /* Disable Address Acknowledge */ - hi2c->Instance->CR2 |= I2C_CR2_NACK; - return HAL_ERROR; - } - - /* Disable Address Acknowledge */ - hi2c->Instance->CR2 |= I2C_CR2_NACK; - - hi2c->State = HAL_I2C_STATE_READY; - hi2c->Mode = HAL_I2C_MODE_NONE; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Transmit in master mode an amount of data in non-blocking mode with Interrupt - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @param DevAddress Target device address: The device 7 bits address value - * in datasheet must be shifted to the left before calling the interface - * @param pData Pointer to data buffer - * @param Size Amount of data to be sent - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2C_Master_Transmit_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, - uint16_t Size) -{ - uint32_t xfermode; - - if (hi2c->State == HAL_I2C_STATE_READY) - { - if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET) - { - return HAL_BUSY; - } - - /* Process Locked */ - __HAL_LOCK(hi2c); - - hi2c->State = HAL_I2C_STATE_BUSY_TX; - hi2c->Mode = HAL_I2C_MODE_MASTER; - hi2c->ErrorCode = HAL_I2C_ERROR_NONE; - - /* Prepare transfer parameters */ - hi2c->pBuffPtr = pData; - hi2c->XferCount = Size; - hi2c->XferOptions = I2C_NO_OPTION_FRAME; - hi2c->XferISR = I2C_Master_ISR_IT; - - if (hi2c->XferCount > MAX_NBYTE_SIZE) - { - hi2c->XferSize = MAX_NBYTE_SIZE; - xfermode = I2C_RELOAD_MODE; - } - else - { - hi2c->XferSize = hi2c->XferCount; - xfermode = I2C_AUTOEND_MODE; - } - - /* Send Slave Address */ - /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE */ - I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, I2C_GENERATE_START_WRITE); - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - /* Note : The I2C interrupts must be enabled after unlocking current process - to avoid the risk of I2C interrupt handle execution before current - process unlock */ - - /* Enable ERR, TC, STOP, NACK, TXI interrupt */ - /* possible to enable all of these */ - /* I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | - I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */ - I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT); - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Receive in master mode an amount of data in non-blocking mode with Interrupt - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @param DevAddress Target device address: The device 7 bits address value - * in datasheet must be shifted to the left before calling the interface - * @param pData Pointer to data buffer - * @param Size Amount of data to be sent - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2C_Master_Receive_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, - uint16_t Size) -{ - uint32_t xfermode; - - if (hi2c->State == HAL_I2C_STATE_READY) - { - if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET) - { - return HAL_BUSY; - } - - /* Process Locked */ - __HAL_LOCK(hi2c); - - hi2c->State = HAL_I2C_STATE_BUSY_RX; - hi2c->Mode = HAL_I2C_MODE_MASTER; - hi2c->ErrorCode = HAL_I2C_ERROR_NONE; - - /* Prepare transfer parameters */ - hi2c->pBuffPtr = pData; - hi2c->XferCount = Size; - hi2c->XferOptions = I2C_NO_OPTION_FRAME; - hi2c->XferISR = I2C_Master_ISR_IT; - - if (hi2c->XferCount > MAX_NBYTE_SIZE) - { - hi2c->XferSize = MAX_NBYTE_SIZE; - xfermode = I2C_RELOAD_MODE; - } - else - { - hi2c->XferSize = hi2c->XferCount; - xfermode = I2C_AUTOEND_MODE; - } - - /* Send Slave Address */ - /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE */ - I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, I2C_GENERATE_START_READ); - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - /* Note : The I2C interrupts must be enabled after unlocking current process - to avoid the risk of I2C interrupt handle execution before current - process unlock */ - - /* Enable ERR, TC, STOP, NACK, RXI interrupt */ - /* possible to enable all of these */ - /* I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | - I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */ - I2C_Enable_IRQ(hi2c, I2C_XFER_RX_IT); - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Transmit in slave mode an amount of data in non-blocking mode with Interrupt - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @param pData Pointer to data buffer - * @param Size Amount of data to be sent - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2C_Slave_Transmit_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size) -{ - if (hi2c->State == HAL_I2C_STATE_READY) - { - /* Process Locked */ - __HAL_LOCK(hi2c); - - hi2c->State = HAL_I2C_STATE_BUSY_TX; - hi2c->Mode = HAL_I2C_MODE_SLAVE; - hi2c->ErrorCode = HAL_I2C_ERROR_NONE; - - /* Enable Address Acknowledge */ - hi2c->Instance->CR2 &= ~I2C_CR2_NACK; - - /* Prepare transfer parameters */ - hi2c->pBuffPtr = pData; - hi2c->XferCount = Size; - hi2c->XferSize = hi2c->XferCount; - hi2c->XferOptions = I2C_NO_OPTION_FRAME; - hi2c->XferISR = I2C_Slave_ISR_IT; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - /* Note : The I2C interrupts must be enabled after unlocking current process - to avoid the risk of I2C interrupt handle execution before current - process unlock */ - - /* Enable ERR, TC, STOP, NACK, TXI interrupt */ - /* possible to enable all of these */ - /* I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | - I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */ - I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT | I2C_XFER_LISTEN_IT); - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Receive in slave mode an amount of data in non-blocking mode with Interrupt - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @param pData Pointer to data buffer - * @param Size Amount of data to be sent - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2C_Slave_Receive_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size) -{ - if (hi2c->State == HAL_I2C_STATE_READY) - { - /* Process Locked */ - __HAL_LOCK(hi2c); - - hi2c->State = HAL_I2C_STATE_BUSY_RX; - hi2c->Mode = HAL_I2C_MODE_SLAVE; - hi2c->ErrorCode = HAL_I2C_ERROR_NONE; - - /* Enable Address Acknowledge */ - hi2c->Instance->CR2 &= ~I2C_CR2_NACK; - - /* Prepare transfer parameters */ - hi2c->pBuffPtr = pData; - hi2c->XferCount = Size; - hi2c->XferSize = hi2c->XferCount; - hi2c->XferOptions = I2C_NO_OPTION_FRAME; - hi2c->XferISR = I2C_Slave_ISR_IT; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - /* Note : The I2C interrupts must be enabled after unlocking current process - to avoid the risk of I2C interrupt handle execution before current - process unlock */ - - /* Enable ERR, TC, STOP, NACK, RXI interrupt */ - /* possible to enable all of these */ - /* I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | - I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */ - I2C_Enable_IRQ(hi2c, I2C_XFER_RX_IT | I2C_XFER_LISTEN_IT); - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Transmit in master mode an amount of data in non-blocking mode with DMA - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @param DevAddress Target device address: The device 7 bits address value - * in datasheet must be shifted to the left before calling the interface - * @param pData Pointer to data buffer - * @param Size Amount of data to be sent - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2C_Master_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, - uint16_t Size) -{ - uint32_t xfermode; - HAL_StatusTypeDef dmaxferstatus; - - if (hi2c->State == HAL_I2C_STATE_READY) - { - if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET) - { - return HAL_BUSY; - } - - /* Process Locked */ - __HAL_LOCK(hi2c); - - hi2c->State = HAL_I2C_STATE_BUSY_TX; - hi2c->Mode = HAL_I2C_MODE_MASTER; - hi2c->ErrorCode = HAL_I2C_ERROR_NONE; - - /* Prepare transfer parameters */ - hi2c->pBuffPtr = pData; - hi2c->XferCount = Size; - hi2c->XferOptions = I2C_NO_OPTION_FRAME; - hi2c->XferISR = I2C_Master_ISR_DMA; - - if (hi2c->XferCount > MAX_NBYTE_SIZE) - { - hi2c->XferSize = MAX_NBYTE_SIZE; - xfermode = I2C_RELOAD_MODE; - } - else - { - hi2c->XferSize = hi2c->XferCount; - xfermode = I2C_AUTOEND_MODE; - } - - if (hi2c->XferSize > 0U) - { - if (hi2c->hdmatx != NULL) - { - /* Set the I2C DMA transfer complete callback */ - hi2c->hdmatx->XferCpltCallback = I2C_DMAMasterTransmitCplt; - - /* Set the DMA error callback */ - hi2c->hdmatx->XferErrorCallback = I2C_DMAError; - - /* Set the unused DMA callbacks to NULL */ - hi2c->hdmatx->XferHalfCpltCallback = NULL; - hi2c->hdmatx->XferAbortCallback = NULL; - - /* Enable the DMA channel */ - dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)pData, (uint32_t)&hi2c->Instance->TXDR, - hi2c->XferSize); - } - else - { - /* Update I2C state */ - hi2c->State = HAL_I2C_STATE_READY; - hi2c->Mode = HAL_I2C_MODE_NONE; - - /* Update I2C error code */ - hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_ERROR; - } - - if (dmaxferstatus == HAL_OK) - { - /* Send Slave Address */ - /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */ - I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, I2C_GENERATE_START_WRITE); - - /* Update XferCount value */ - hi2c->XferCount -= hi2c->XferSize; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - /* Note : The I2C interrupts must be enabled after unlocking current process - to avoid the risk of I2C interrupt handle execution before current - process unlock */ - /* Enable ERR and NACK interrupts */ - I2C_Enable_IRQ(hi2c, I2C_XFER_ERROR_IT); - - /* Enable DMA Request */ - hi2c->Instance->CR1 |= I2C_CR1_TXDMAEN; - } - else - { - /* Update I2C state */ - hi2c->State = HAL_I2C_STATE_READY; - hi2c->Mode = HAL_I2C_MODE_NONE; - - /* Update I2C error code */ - hi2c->ErrorCode |= HAL_I2C_ERROR_DMA; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_ERROR; - } - } - else - { - /* Update Transfer ISR function pointer */ - hi2c->XferISR = I2C_Master_ISR_IT; - - /* Send Slave Address */ - /* Set NBYTES to write and generate START condition */ - I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, - I2C_GENERATE_START_WRITE); - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - /* Note : The I2C interrupts must be enabled after unlocking current process - to avoid the risk of I2C interrupt handle execution before current - process unlock */ - /* Enable ERR, TC, STOP, NACK, TXI interrupt */ - /* possible to enable all of these */ - /* I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | - I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */ - I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT); - } - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Receive in master mode an amount of data in non-blocking mode with DMA - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @param DevAddress Target device address: The device 7 bits address value - * in datasheet must be shifted to the left before calling the interface - * @param pData Pointer to data buffer - * @param Size Amount of data to be sent - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2C_Master_Receive_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, - uint16_t Size) -{ - uint32_t xfermode; - HAL_StatusTypeDef dmaxferstatus; - - if (hi2c->State == HAL_I2C_STATE_READY) - { - if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET) - { - return HAL_BUSY; - } - - /* Process Locked */ - __HAL_LOCK(hi2c); - - hi2c->State = HAL_I2C_STATE_BUSY_RX; - hi2c->Mode = HAL_I2C_MODE_MASTER; - hi2c->ErrorCode = HAL_I2C_ERROR_NONE; - - /* Prepare transfer parameters */ - hi2c->pBuffPtr = pData; - hi2c->XferCount = Size; - hi2c->XferOptions = I2C_NO_OPTION_FRAME; - hi2c->XferISR = I2C_Master_ISR_DMA; - - if (hi2c->XferCount > MAX_NBYTE_SIZE) - { - hi2c->XferSize = MAX_NBYTE_SIZE; - xfermode = I2C_RELOAD_MODE; - } - else - { - hi2c->XferSize = hi2c->XferCount; - xfermode = I2C_AUTOEND_MODE; - } - - if (hi2c->XferSize > 0U) - { - if (hi2c->hdmarx != NULL) - { - /* Set the I2C DMA transfer complete callback */ - hi2c->hdmarx->XferCpltCallback = I2C_DMAMasterReceiveCplt; - - /* Set the DMA error callback */ - hi2c->hdmarx->XferErrorCallback = I2C_DMAError; - - /* Set the unused DMA callbacks to NULL */ - hi2c->hdmarx->XferHalfCpltCallback = NULL; - hi2c->hdmarx->XferAbortCallback = NULL; - - /* Enable the DMA channel */ - dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmarx, (uint32_t)&hi2c->Instance->RXDR, (uint32_t)pData, - hi2c->XferSize); - } - else - { - /* Update I2C state */ - hi2c->State = HAL_I2C_STATE_READY; - hi2c->Mode = HAL_I2C_MODE_NONE; - - /* Update I2C error code */ - hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_ERROR; - } - - if (dmaxferstatus == HAL_OK) - { - /* Send Slave Address */ - /* Set NBYTES to read and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */ - I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, I2C_GENERATE_START_READ); - - /* Update XferCount value */ - hi2c->XferCount -= hi2c->XferSize; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - /* Note : The I2C interrupts must be enabled after unlocking current process - to avoid the risk of I2C interrupt handle execution before current - process unlock */ - /* Enable ERR and NACK interrupts */ - I2C_Enable_IRQ(hi2c, I2C_XFER_ERROR_IT); - - /* Enable DMA Request */ - hi2c->Instance->CR1 |= I2C_CR1_RXDMAEN; - } - else - { - /* Update I2C state */ - hi2c->State = HAL_I2C_STATE_READY; - hi2c->Mode = HAL_I2C_MODE_NONE; - - /* Update I2C error code */ - hi2c->ErrorCode |= HAL_I2C_ERROR_DMA; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_ERROR; - } - } - else - { - /* Update Transfer ISR function pointer */ - hi2c->XferISR = I2C_Master_ISR_IT; - - /* Send Slave Address */ - /* Set NBYTES to read and generate START condition */ - I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, - I2C_GENERATE_START_READ); - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - /* Note : The I2C interrupts must be enabled after unlocking current process - to avoid the risk of I2C interrupt handle execution before current - process unlock */ - /* Enable ERR, TC, STOP, NACK, TXI interrupt */ - /* possible to enable all of these */ - /* I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | - I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */ - I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT); - } - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Transmit in slave mode an amount of data in non-blocking mode with DMA - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @param pData Pointer to data buffer - * @param Size Amount of data to be sent - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2C_Slave_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size) -{ - HAL_StatusTypeDef dmaxferstatus; - - if (hi2c->State == HAL_I2C_STATE_READY) - { - if ((pData == NULL) || (Size == 0U)) - { - hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; - return HAL_ERROR; - } - /* Process Locked */ - __HAL_LOCK(hi2c); - - hi2c->State = HAL_I2C_STATE_BUSY_TX; - hi2c->Mode = HAL_I2C_MODE_SLAVE; - hi2c->ErrorCode = HAL_I2C_ERROR_NONE; - - /* Prepare transfer parameters */ - hi2c->pBuffPtr = pData; - hi2c->XferCount = Size; - hi2c->XferSize = hi2c->XferCount; - hi2c->XferOptions = I2C_NO_OPTION_FRAME; - hi2c->XferISR = I2C_Slave_ISR_DMA; - - if (hi2c->hdmatx != NULL) - { - /* Set the I2C DMA transfer complete callback */ - hi2c->hdmatx->XferCpltCallback = I2C_DMASlaveTransmitCplt; - - /* Set the DMA error callback */ - hi2c->hdmatx->XferErrorCallback = I2C_DMAError; - - /* Set the unused DMA callbacks to NULL */ - hi2c->hdmatx->XferHalfCpltCallback = NULL; - hi2c->hdmatx->XferAbortCallback = NULL; - - /* Enable the DMA channel */ - dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)pData, (uint32_t)&hi2c->Instance->TXDR, - hi2c->XferSize); - } - else - { - /* Update I2C state */ - hi2c->State = HAL_I2C_STATE_LISTEN; - hi2c->Mode = HAL_I2C_MODE_NONE; - - /* Update I2C error code */ - hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_ERROR; - } - - if (dmaxferstatus == HAL_OK) - { - /* Enable Address Acknowledge */ - hi2c->Instance->CR2 &= ~I2C_CR2_NACK; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - /* Note : The I2C interrupts must be enabled after unlocking current process - to avoid the risk of I2C interrupt handle execution before current - process unlock */ - /* Enable ERR, STOP, NACK, ADDR interrupts */ - I2C_Enable_IRQ(hi2c, I2C_XFER_LISTEN_IT); - - /* Enable DMA Request */ - hi2c->Instance->CR1 |= I2C_CR1_TXDMAEN; - } - else - { - /* Update I2C state */ - hi2c->State = HAL_I2C_STATE_LISTEN; - hi2c->Mode = HAL_I2C_MODE_NONE; - - /* Update I2C error code */ - hi2c->ErrorCode |= HAL_I2C_ERROR_DMA; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_ERROR; - } - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Receive in slave mode an amount of data in non-blocking mode with DMA - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @param pData Pointer to data buffer - * @param Size Amount of data to be sent - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2C_Slave_Receive_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size) -{ - HAL_StatusTypeDef dmaxferstatus; - - if (hi2c->State == HAL_I2C_STATE_READY) - { - if ((pData == NULL) || (Size == 0U)) - { - hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; - return HAL_ERROR; - } - /* Process Locked */ - __HAL_LOCK(hi2c); - - hi2c->State = HAL_I2C_STATE_BUSY_RX; - hi2c->Mode = HAL_I2C_MODE_SLAVE; - hi2c->ErrorCode = HAL_I2C_ERROR_NONE; - - /* Prepare transfer parameters */ - hi2c->pBuffPtr = pData; - hi2c->XferCount = Size; - hi2c->XferSize = hi2c->XferCount; - hi2c->XferOptions = I2C_NO_OPTION_FRAME; - hi2c->XferISR = I2C_Slave_ISR_DMA; - - if (hi2c->hdmarx != NULL) - { - /* Set the I2C DMA transfer complete callback */ - hi2c->hdmarx->XferCpltCallback = I2C_DMASlaveReceiveCplt; - - /* Set the DMA error callback */ - hi2c->hdmarx->XferErrorCallback = I2C_DMAError; - - /* Set the unused DMA callbacks to NULL */ - hi2c->hdmarx->XferHalfCpltCallback = NULL; - hi2c->hdmarx->XferAbortCallback = NULL; - - /* Enable the DMA channel */ - dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmarx, (uint32_t)&hi2c->Instance->RXDR, (uint32_t)pData, - hi2c->XferSize); - } - else - { - /* Update I2C state */ - hi2c->State = HAL_I2C_STATE_LISTEN; - hi2c->Mode = HAL_I2C_MODE_NONE; - - /* Update I2C error code */ - hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_ERROR; - } - - if (dmaxferstatus == HAL_OK) - { - /* Enable Address Acknowledge */ - hi2c->Instance->CR2 &= ~I2C_CR2_NACK; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - /* Note : The I2C interrupts must be enabled after unlocking current process - to avoid the risk of I2C interrupt handle execution before current - process unlock */ - /* Enable ERR, STOP, NACK, ADDR interrupts */ - I2C_Enable_IRQ(hi2c, I2C_XFER_LISTEN_IT); - - /* Enable DMA Request */ - hi2c->Instance->CR1 |= I2C_CR1_RXDMAEN; - } - else - { - /* Update I2C state */ - hi2c->State = HAL_I2C_STATE_LISTEN; - hi2c->Mode = HAL_I2C_MODE_NONE; - - /* Update I2C error code */ - hi2c->ErrorCode |= HAL_I2C_ERROR_DMA; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_ERROR; - } - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} -/** - * @brief Write an amount of data in blocking mode to a specific memory address - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @param DevAddress Target device address: The device 7 bits address value - * in datasheet must be shifted to the left before calling the interface - * @param MemAddress Internal memory address - * @param MemAddSize Size of internal memory address - * @param pData Pointer to data buffer - * @param Size Amount of data to be sent - * @param Timeout Timeout duration - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2C_Mem_Write(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, - uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout) -{ - uint32_t tickstart; - - /* Check the parameters */ - assert_param(IS_I2C_MEMADD_SIZE(MemAddSize)); - - if (hi2c->State == HAL_I2C_STATE_READY) - { - if ((pData == NULL) || (Size == 0U)) - { - hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; - return HAL_ERROR; - } - - /* Process Locked */ - __HAL_LOCK(hi2c); - - /* Init tickstart for timeout management*/ - tickstart = HAL_GetTick(); - - if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY, tickstart) != HAL_OK) - { - return HAL_ERROR; - } - - hi2c->State = HAL_I2C_STATE_BUSY_TX; - hi2c->Mode = HAL_I2C_MODE_MEM; - hi2c->ErrorCode = HAL_I2C_ERROR_NONE; - - /* Prepare transfer parameters */ - hi2c->pBuffPtr = pData; - hi2c->XferCount = Size; - hi2c->XferISR = NULL; - - /* Send Slave Address and Memory Address */ - if (I2C_RequestMemoryWrite(hi2c, DevAddress, MemAddress, MemAddSize, Timeout, tickstart) != HAL_OK) - { - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - return HAL_ERROR; - } - - /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE */ - if (hi2c->XferCount > MAX_NBYTE_SIZE) - { - hi2c->XferSize = MAX_NBYTE_SIZE; - I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_RELOAD_MODE, I2C_NO_STARTSTOP); - } - else - { - hi2c->XferSize = hi2c->XferCount; - I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, I2C_NO_STARTSTOP); - } - - do - { - /* Wait until TXIS flag is set */ - if (I2C_WaitOnTXISFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) - { - return HAL_ERROR; - } - - /* Write data to TXDR */ - hi2c->Instance->TXDR = *hi2c->pBuffPtr; - - /* Increment Buffer pointer */ - hi2c->pBuffPtr++; - - hi2c->XferCount--; - hi2c->XferSize--; - - if ((hi2c->XferCount != 0U) && (hi2c->XferSize == 0U)) - { - /* Wait until TCR flag is set */ - if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TCR, RESET, Timeout, tickstart) != HAL_OK) - { - return HAL_ERROR; - } - - if (hi2c->XferCount > MAX_NBYTE_SIZE) - { - hi2c->XferSize = MAX_NBYTE_SIZE; - I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_RELOAD_MODE, - I2C_NO_STARTSTOP); - } - else - { - hi2c->XferSize = hi2c->XferCount; - I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, - I2C_NO_STARTSTOP); - } - } - - } while (hi2c->XferCount > 0U); - - /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */ - /* Wait until STOPF flag is reset */ - if (I2C_WaitOnSTOPFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) - { - return HAL_ERROR; - } - - /* Clear STOP Flag */ - __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); - - /* Clear Configuration Register 2 */ - I2C_RESET_CR2(hi2c); - - hi2c->State = HAL_I2C_STATE_READY; - hi2c->Mode = HAL_I2C_MODE_NONE; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Read an amount of data in blocking mode from a specific memory address - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @param DevAddress Target device address: The device 7 bits address value - * in datasheet must be shifted to the left before calling the interface - * @param MemAddress Internal memory address - * @param MemAddSize Size of internal memory address - * @param pData Pointer to data buffer - * @param Size Amount of data to be sent - * @param Timeout Timeout duration - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2C_Mem_Read(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, - uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout) -{ - uint32_t tickstart; - - /* Check the parameters */ - assert_param(IS_I2C_MEMADD_SIZE(MemAddSize)); - - if (hi2c->State == HAL_I2C_STATE_READY) - { - if ((pData == NULL) || (Size == 0U)) - { - hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; - return HAL_ERROR; - } - - /* Process Locked */ - __HAL_LOCK(hi2c); - - /* Init tickstart for timeout management*/ - tickstart = HAL_GetTick(); - - if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY, tickstart) != HAL_OK) - { - return HAL_ERROR; - } - - hi2c->State = HAL_I2C_STATE_BUSY_RX; - hi2c->Mode = HAL_I2C_MODE_MEM; - hi2c->ErrorCode = HAL_I2C_ERROR_NONE; - - /* Prepare transfer parameters */ - hi2c->pBuffPtr = pData; - hi2c->XferCount = Size; - hi2c->XferISR = NULL; - - /* Send Slave Address and Memory Address */ - if (I2C_RequestMemoryRead(hi2c, DevAddress, MemAddress, MemAddSize, Timeout, tickstart) != HAL_OK) - { - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - return HAL_ERROR; - } - - /* Send Slave Address */ - /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */ - if (hi2c->XferCount > MAX_NBYTE_SIZE) - { - hi2c->XferSize = MAX_NBYTE_SIZE; - I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_RELOAD_MODE, - I2C_GENERATE_START_READ); - } - else - { - hi2c->XferSize = hi2c->XferCount; - I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, - I2C_GENERATE_START_READ); - } - - do - { - /* Wait until RXNE flag is set */ - if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_RXNE, RESET, Timeout, tickstart) != HAL_OK) - { - return HAL_ERROR; - } - - /* Read data from RXDR */ - *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->RXDR; - - /* Increment Buffer pointer */ - hi2c->pBuffPtr++; - - hi2c->XferSize--; - hi2c->XferCount--; - - if ((hi2c->XferCount != 0U) && (hi2c->XferSize == 0U)) - { - /* Wait until TCR flag is set */ - if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TCR, RESET, Timeout, tickstart) != HAL_OK) - { - return HAL_ERROR; - } - - if (hi2c->XferCount > MAX_NBYTE_SIZE) - { - hi2c->XferSize = MAX_NBYTE_SIZE; - I2C_TransferConfig(hi2c, DevAddress, (uint8_t) hi2c->XferSize, I2C_RELOAD_MODE, - I2C_NO_STARTSTOP); - } - else - { - hi2c->XferSize = hi2c->XferCount; - I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, - I2C_NO_STARTSTOP); - } - } - } while (hi2c->XferCount > 0U); - - /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */ - /* Wait until STOPF flag is reset */ - if (I2C_WaitOnSTOPFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) - { - return HAL_ERROR; - } - - /* Clear STOP Flag */ - __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); - - /* Clear Configuration Register 2 */ - I2C_RESET_CR2(hi2c); - - hi2c->State = HAL_I2C_STATE_READY; - hi2c->Mode = HAL_I2C_MODE_NONE; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} -/** - * @brief Write an amount of data in non-blocking mode with Interrupt to a specific memory address - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @param DevAddress Target device address: The device 7 bits address value - * in datasheet must be shifted to the left before calling the interface - * @param MemAddress Internal memory address - * @param MemAddSize Size of internal memory address - * @param pData Pointer to data buffer - * @param Size Amount of data to be sent - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2C_Mem_Write_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, - uint16_t MemAddSize, uint8_t *pData, uint16_t Size) -{ - /* Check the parameters */ - assert_param(IS_I2C_MEMADD_SIZE(MemAddSize)); - - if (hi2c->State == HAL_I2C_STATE_READY) - { - if ((pData == NULL) || (Size == 0U)) - { - hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; - return HAL_ERROR; - } - - if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET) - { - return HAL_BUSY; - } - - /* Process Locked */ - __HAL_LOCK(hi2c); - - hi2c->State = HAL_I2C_STATE_BUSY_TX; - hi2c->Mode = HAL_I2C_MODE_MEM; - hi2c->ErrorCode = HAL_I2C_ERROR_NONE; - - /* Prepare transfer parameters */ - hi2c->pBuffPtr = pData; - hi2c->XferCount = Size; - hi2c->XferOptions = I2C_NO_OPTION_FRAME; - hi2c->XferISR = I2C_Mem_ISR_IT; - hi2c->Devaddress = DevAddress; - - /* If Memory address size is 8Bit */ - if (MemAddSize == I2C_MEMADD_SIZE_8BIT) - { - /* Prefetch Memory Address */ - hi2c->Instance->TXDR = I2C_MEM_ADD_LSB(MemAddress); - - /* Reset Memaddress content */ - hi2c->Memaddress = 0xFFFFFFFFU; - } - /* If Memory address size is 16Bit */ - else - { - /* Prefetch Memory Address (MSB part, LSB will be manage through interrupt) */ - hi2c->Instance->TXDR = I2C_MEM_ADD_MSB(MemAddress); - - /* Prepare Memaddress buffer for LSB part */ - hi2c->Memaddress = I2C_MEM_ADD_LSB(MemAddress); - } - /* Send Slave Address and Memory Address */ - I2C_TransferConfig(hi2c, DevAddress, (uint8_t)MemAddSize, I2C_RELOAD_MODE, I2C_GENERATE_START_WRITE); - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - /* Note : The I2C interrupts must be enabled after unlocking current process - to avoid the risk of I2C interrupt handle execution before current - process unlock */ - - /* Enable ERR, TC, STOP, NACK, TXI interrupt */ - /* possible to enable all of these */ - /* I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | - I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */ - I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT); - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Read an amount of data in non-blocking mode with Interrupt from a specific memory address - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @param DevAddress Target device address: The device 7 bits address value - * in datasheet must be shifted to the left before calling the interface - * @param MemAddress Internal memory address - * @param MemAddSize Size of internal memory address - * @param pData Pointer to data buffer - * @param Size Amount of data to be sent - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2C_Mem_Read_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, - uint16_t MemAddSize, uint8_t *pData, uint16_t Size) -{ - /* Check the parameters */ - assert_param(IS_I2C_MEMADD_SIZE(MemAddSize)); - - if (hi2c->State == HAL_I2C_STATE_READY) - { - if ((pData == NULL) || (Size == 0U)) - { - hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; - return HAL_ERROR; - } - - if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET) - { - return HAL_BUSY; - } - - /* Process Locked */ - __HAL_LOCK(hi2c); - - hi2c->State = HAL_I2C_STATE_BUSY_RX; - hi2c->Mode = HAL_I2C_MODE_MEM; - hi2c->ErrorCode = HAL_I2C_ERROR_NONE; - - /* Prepare transfer parameters */ - hi2c->pBuffPtr = pData; - hi2c->XferCount = Size; - hi2c->XferOptions = I2C_NO_OPTION_FRAME; - hi2c->XferISR = I2C_Mem_ISR_IT; - hi2c->Devaddress = DevAddress; - - /* If Memory address size is 8Bit */ - if (MemAddSize == I2C_MEMADD_SIZE_8BIT) - { - /* Prefetch Memory Address */ - hi2c->Instance->TXDR = I2C_MEM_ADD_LSB(MemAddress); - - /* Reset Memaddress content */ - hi2c->Memaddress = 0xFFFFFFFFU; - } - /* If Memory address size is 16Bit */ - else - { - /* Prefetch Memory Address (MSB part, LSB will be manage through interrupt) */ - hi2c->Instance->TXDR = I2C_MEM_ADD_MSB(MemAddress); - - /* Prepare Memaddress buffer for LSB part */ - hi2c->Memaddress = I2C_MEM_ADD_LSB(MemAddress); - } - /* Send Slave Address and Memory Address */ - I2C_TransferConfig(hi2c, DevAddress, (uint8_t)MemAddSize, I2C_SOFTEND_MODE, I2C_GENERATE_START_WRITE); - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - /* Note : The I2C interrupts must be enabled after unlocking current process - to avoid the risk of I2C interrupt handle execution before current - process unlock */ - - /* Enable ERR, TC, STOP, NACK, RXI interrupt */ - /* possible to enable all of these */ - /* I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | - I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */ - I2C_Enable_IRQ(hi2c, (I2C_XFER_TX_IT | I2C_XFER_RX_IT)); - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} -/** - * @brief Write an amount of data in non-blocking mode with DMA to a specific memory address - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @param DevAddress Target device address: The device 7 bits address value - * in datasheet must be shifted to the left before calling the interface - * @param MemAddress Internal memory address - * @param MemAddSize Size of internal memory address - * @param pData Pointer to data buffer - * @param Size Amount of data to be sent - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2C_Mem_Write_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, - uint16_t MemAddSize, uint8_t *pData, uint16_t Size) -{ - HAL_StatusTypeDef dmaxferstatus; - - /* Check the parameters */ - assert_param(IS_I2C_MEMADD_SIZE(MemAddSize)); - - if (hi2c->State == HAL_I2C_STATE_READY) - { - if ((pData == NULL) || (Size == 0U)) - { - hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; - return HAL_ERROR; - } - - if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET) - { - return HAL_BUSY; - } - - /* Process Locked */ - __HAL_LOCK(hi2c); - - hi2c->State = HAL_I2C_STATE_BUSY_TX; - hi2c->Mode = HAL_I2C_MODE_MEM; - hi2c->ErrorCode = HAL_I2C_ERROR_NONE; - - /* Prepare transfer parameters */ - hi2c->pBuffPtr = pData; - hi2c->XferCount = Size; - hi2c->XferOptions = I2C_NO_OPTION_FRAME; - hi2c->XferISR = I2C_Mem_ISR_DMA; - hi2c->Devaddress = DevAddress; - - if (hi2c->XferCount > MAX_NBYTE_SIZE) - { - hi2c->XferSize = MAX_NBYTE_SIZE; - } - else - { - hi2c->XferSize = hi2c->XferCount; - } - - /* If Memory address size is 8Bit */ - if (MemAddSize == I2C_MEMADD_SIZE_8BIT) - { - /* Prefetch Memory Address */ - hi2c->Instance->TXDR = I2C_MEM_ADD_LSB(MemAddress); - - /* Reset Memaddress content */ - hi2c->Memaddress = 0xFFFFFFFFU; - } - /* If Memory address size is 16Bit */ - else - { - /* Prefetch Memory Address (MSB part, LSB will be manage through interrupt) */ - hi2c->Instance->TXDR = I2C_MEM_ADD_MSB(MemAddress); - - /* Prepare Memaddress buffer for LSB part */ - hi2c->Memaddress = I2C_MEM_ADD_LSB(MemAddress); - } - - if (hi2c->hdmatx != NULL) - { - /* Set the I2C DMA transfer complete callback */ - hi2c->hdmatx->XferCpltCallback = I2C_DMAMasterTransmitCplt; - - /* Set the DMA error callback */ - hi2c->hdmatx->XferErrorCallback = I2C_DMAError; - - /* Set the unused DMA callbacks to NULL */ - hi2c->hdmatx->XferHalfCpltCallback = NULL; - hi2c->hdmatx->XferAbortCallback = NULL; - - /* Enable the DMA channel */ - dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)pData, (uint32_t)&hi2c->Instance->TXDR, - hi2c->XferSize); - } - else - { - /* Update I2C state */ - hi2c->State = HAL_I2C_STATE_READY; - hi2c->Mode = HAL_I2C_MODE_NONE; - - /* Update I2C error code */ - hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_ERROR; - } - - if (dmaxferstatus == HAL_OK) - { - /* Send Slave Address and Memory Address */ - I2C_TransferConfig(hi2c, DevAddress, (uint8_t)MemAddSize, I2C_RELOAD_MODE, I2C_GENERATE_START_WRITE); - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - /* Note : The I2C interrupts must be enabled after unlocking current process - to avoid the risk of I2C interrupt handle execution before current - process unlock */ - /* Enable ERR, TC, STOP, NACK, TXI interrupt */ - /* possible to enable all of these */ - /* I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | - I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */ - I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT); - } - else - { - /* Update I2C state */ - hi2c->State = HAL_I2C_STATE_READY; - hi2c->Mode = HAL_I2C_MODE_NONE; - - /* Update I2C error code */ - hi2c->ErrorCode |= HAL_I2C_ERROR_DMA; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_ERROR; - } - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Reads an amount of data in non-blocking mode with DMA from a specific memory address. - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @param DevAddress Target device address: The device 7 bits address value - * in datasheet must be shifted to the left before calling the interface - * @param MemAddress Internal memory address - * @param MemAddSize Size of internal memory address - * @param pData Pointer to data buffer - * @param Size Amount of data to be read - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2C_Mem_Read_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, - uint16_t MemAddSize, uint8_t *pData, uint16_t Size) -{ - HAL_StatusTypeDef dmaxferstatus; - - /* Check the parameters */ - assert_param(IS_I2C_MEMADD_SIZE(MemAddSize)); - - if (hi2c->State == HAL_I2C_STATE_READY) - { - if ((pData == NULL) || (Size == 0U)) - { - hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; - return HAL_ERROR; - } - - if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET) - { - return HAL_BUSY; - } - - /* Process Locked */ - __HAL_LOCK(hi2c); - - hi2c->State = HAL_I2C_STATE_BUSY_RX; - hi2c->Mode = HAL_I2C_MODE_MEM; - hi2c->ErrorCode = HAL_I2C_ERROR_NONE; - - /* Prepare transfer parameters */ - hi2c->pBuffPtr = pData; - hi2c->XferCount = Size; - hi2c->XferOptions = I2C_NO_OPTION_FRAME; - hi2c->XferISR = I2C_Mem_ISR_DMA; - hi2c->Devaddress = DevAddress; - - if (hi2c->XferCount > MAX_NBYTE_SIZE) - { - hi2c->XferSize = MAX_NBYTE_SIZE; - } - else - { - hi2c->XferSize = hi2c->XferCount; - } - - /* If Memory address size is 8Bit */ - if (MemAddSize == I2C_MEMADD_SIZE_8BIT) - { - /* Prefetch Memory Address */ - hi2c->Instance->TXDR = I2C_MEM_ADD_LSB(MemAddress); - - /* Reset Memaddress content */ - hi2c->Memaddress = 0xFFFFFFFFU; - } - /* If Memory address size is 16Bit */ - else - { - /* Prefetch Memory Address (MSB part, LSB will be manage through interrupt) */ - hi2c->Instance->TXDR = I2C_MEM_ADD_MSB(MemAddress); - - /* Prepare Memaddress buffer for LSB part */ - hi2c->Memaddress = I2C_MEM_ADD_LSB(MemAddress); - } - - if (hi2c->hdmarx != NULL) - { - /* Set the I2C DMA transfer complete callback */ - hi2c->hdmarx->XferCpltCallback = I2C_DMAMasterReceiveCplt; - - /* Set the DMA error callback */ - hi2c->hdmarx->XferErrorCallback = I2C_DMAError; - - /* Set the unused DMA callbacks to NULL */ - hi2c->hdmarx->XferHalfCpltCallback = NULL; - hi2c->hdmarx->XferAbortCallback = NULL; - - /* Enable the DMA channel */ - dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmarx, (uint32_t)&hi2c->Instance->RXDR, (uint32_t)pData, - hi2c->XferSize); - } - else - { - /* Update I2C state */ - hi2c->State = HAL_I2C_STATE_READY; - hi2c->Mode = HAL_I2C_MODE_NONE; - - /* Update I2C error code */ - hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_ERROR; - } - - if (dmaxferstatus == HAL_OK) - { - /* Send Slave Address and Memory Address */ - I2C_TransferConfig(hi2c, DevAddress, (uint8_t)MemAddSize, I2C_SOFTEND_MODE, I2C_GENERATE_START_WRITE); - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - /* Note : The I2C interrupts must be enabled after unlocking current process - to avoid the risk of I2C interrupt handle execution before current - process unlock */ - /* Enable ERR, TC, STOP, NACK, TXI interrupt */ - /* possible to enable all of these */ - /* I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | - I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */ - I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT); - } - else - { - /* Update I2C state */ - hi2c->State = HAL_I2C_STATE_READY; - hi2c->Mode = HAL_I2C_MODE_NONE; - - /* Update I2C error code */ - hi2c->ErrorCode |= HAL_I2C_ERROR_DMA; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_ERROR; - } - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Checks if target device is ready for communication. - * @note This function is used with Memory devices - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @param DevAddress Target device address: The device 7 bits address value - * in datasheet must be shifted to the left before calling the interface - * @param Trials Number of trials - * @param Timeout Timeout duration - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2C_IsDeviceReady(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint32_t Trials, - uint32_t Timeout) -{ - uint32_t tickstart; - - __IO uint32_t I2C_Trials = 0UL; - - FlagStatus tmp1; - FlagStatus tmp2; - - if (hi2c->State == HAL_I2C_STATE_READY) - { - if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET) - { - return HAL_BUSY; - } - - /* Process Locked */ - __HAL_LOCK(hi2c); - - hi2c->State = HAL_I2C_STATE_BUSY; - hi2c->ErrorCode = HAL_I2C_ERROR_NONE; - - do - { - /* Generate Start */ - hi2c->Instance->CR2 = I2C_GENERATE_START(hi2c->Init.AddressingMode, DevAddress); - - /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */ - /* Wait until STOPF flag is set or a NACK flag is set*/ - tickstart = HAL_GetTick(); - - tmp1 = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_STOPF); - tmp2 = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_AF); - - while ((tmp1 == RESET) && (tmp2 == RESET)) - { - if (Timeout != HAL_MAX_DELAY) - { - if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U)) - { - /* Update I2C state */ - hi2c->State = HAL_I2C_STATE_READY; - - /* Update I2C error code */ - hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_ERROR; - } - } - - tmp1 = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_STOPF); - tmp2 = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_AF); - } - - /* Check if the NACKF flag has not been set */ - if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_AF) == RESET) - { - /* Wait until STOPF flag is reset */ - if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_STOPF, RESET, Timeout, tickstart) != HAL_OK) - { - return HAL_ERROR; - } - - /* Clear STOP Flag */ - __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); - - /* Device is ready */ - hi2c->State = HAL_I2C_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_OK; - } - else - { - /* Wait until STOPF flag is reset */ - if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_STOPF, RESET, Timeout, tickstart) != HAL_OK) - { - return HAL_ERROR; - } - - /* Clear NACK Flag */ - __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); - - /* Clear STOP Flag, auto generated with autoend*/ - __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); - } - - /* Check if the maximum allowed number of trials has been reached */ - if (I2C_Trials == Trials) - { - /* Generate Stop */ - hi2c->Instance->CR2 |= I2C_CR2_STOP; - - /* Wait until STOPF flag is reset */ - if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_STOPF, RESET, Timeout, tickstart) != HAL_OK) - { - return HAL_ERROR; - } - - /* Clear STOP Flag */ - __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); - } - - /* Increment Trials */ - I2C_Trials++; - } while (I2C_Trials < Trials); - - /* Update I2C state */ - hi2c->State = HAL_I2C_STATE_READY; - - /* Update I2C error code */ - hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_ERROR; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Sequential transmit in master I2C mode an amount of data in non-blocking mode with Interrupt. - * @note This interface allow to manage repeated start condition when a direction change during transfer - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @param DevAddress Target device address: The device 7 bits address value - * in datasheet must be shifted to the left before calling the interface - * @param pData Pointer to data buffer - * @param Size Amount of data to be sent - * @param XferOptions Options of Transfer, value of @ref I2C_XFEROPTIONS - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2C_Master_Seq_Transmit_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, - uint16_t Size, uint32_t XferOptions) -{ - uint32_t xfermode; - uint32_t xferrequest = I2C_GENERATE_START_WRITE; - - /* Check the parameters */ - assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions)); - - if (hi2c->State == HAL_I2C_STATE_READY) - { - /* Process Locked */ - __HAL_LOCK(hi2c); - - hi2c->State = HAL_I2C_STATE_BUSY_TX; - hi2c->Mode = HAL_I2C_MODE_MASTER; - hi2c->ErrorCode = HAL_I2C_ERROR_NONE; - - /* Prepare transfer parameters */ - hi2c->pBuffPtr = pData; - hi2c->XferCount = Size; - hi2c->XferOptions = XferOptions; - hi2c->XferISR = I2C_Master_ISR_IT; - - /* If hi2c->XferCount > MAX_NBYTE_SIZE, use reload mode */ - if (hi2c->XferCount > MAX_NBYTE_SIZE) - { - hi2c->XferSize = MAX_NBYTE_SIZE; - xfermode = I2C_RELOAD_MODE; - } - else - { - hi2c->XferSize = hi2c->XferCount; - xfermode = hi2c->XferOptions; - } - - /* If transfer direction not change and there is no request to start another frame, - do not generate Restart Condition */ - /* Mean Previous state is same as current state */ - if ((hi2c->PreviousState == I2C_STATE_MASTER_BUSY_TX) && \ - (IS_I2C_TRANSFER_OTHER_OPTIONS_REQUEST(XferOptions) == 0)) - { - xferrequest = I2C_NO_STARTSTOP; - } - else - { - /* Convert OTHER_xxx XferOptions if any */ - I2C_ConvertOtherXferOptions(hi2c); - - /* Update xfermode accordingly if no reload is necessary */ - if (hi2c->XferCount <= MAX_NBYTE_SIZE) - { - xfermode = hi2c->XferOptions; - } - } - - /* Send Slave Address and set NBYTES to write */ - I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, xferrequest); - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - /* Note : The I2C interrupts must be enabled after unlocking current process - to avoid the risk of I2C interrupt handle execution before current - process unlock */ - /* Enable ERR, TC, STOP, NACK, TXI interrupt */ - /* possible to enable all of these */ - /* I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | - I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */ - I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT); - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Sequential transmit in master I2C mode an amount of data in non-blocking mode with DMA. - * @note This interface allow to manage repeated start condition when a direction change during transfer - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @param DevAddress Target device address: The device 7 bits address value - * in datasheet must be shifted to the left before calling the interface - * @param pData Pointer to data buffer - * @param Size Amount of data to be sent - * @param XferOptions Options of Transfer, value of @ref I2C_XFEROPTIONS - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2C_Master_Seq_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, - uint16_t Size, uint32_t XferOptions) -{ - uint32_t xfermode; - uint32_t xferrequest = I2C_GENERATE_START_WRITE; - HAL_StatusTypeDef dmaxferstatus; - - /* Check the parameters */ - assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions)); - - if (hi2c->State == HAL_I2C_STATE_READY) - { - /* Process Locked */ - __HAL_LOCK(hi2c); - - hi2c->State = HAL_I2C_STATE_BUSY_TX; - hi2c->Mode = HAL_I2C_MODE_MASTER; - hi2c->ErrorCode = HAL_I2C_ERROR_NONE; - - /* Prepare transfer parameters */ - hi2c->pBuffPtr = pData; - hi2c->XferCount = Size; - hi2c->XferOptions = XferOptions; - hi2c->XferISR = I2C_Master_ISR_DMA; - - /* If hi2c->XferCount > MAX_NBYTE_SIZE, use reload mode */ - if (hi2c->XferCount > MAX_NBYTE_SIZE) - { - hi2c->XferSize = MAX_NBYTE_SIZE; - xfermode = I2C_RELOAD_MODE; - } - else - { - hi2c->XferSize = hi2c->XferCount; - xfermode = hi2c->XferOptions; - } - - /* If transfer direction not change and there is no request to start another frame, - do not generate Restart Condition */ - /* Mean Previous state is same as current state */ - if ((hi2c->PreviousState == I2C_STATE_MASTER_BUSY_TX) && \ - (IS_I2C_TRANSFER_OTHER_OPTIONS_REQUEST(XferOptions) == 0)) - { - xferrequest = I2C_NO_STARTSTOP; - } - else - { - /* Convert OTHER_xxx XferOptions if any */ - I2C_ConvertOtherXferOptions(hi2c); - - /* Update xfermode accordingly if no reload is necessary */ - if (hi2c->XferCount <= MAX_NBYTE_SIZE) - { - xfermode = hi2c->XferOptions; - } - } - - if (hi2c->XferSize > 0U) - { - if (hi2c->hdmatx != NULL) - { - /* Set the I2C DMA transfer complete callback */ - hi2c->hdmatx->XferCpltCallback = I2C_DMAMasterTransmitCplt; - - /* Set the DMA error callback */ - hi2c->hdmatx->XferErrorCallback = I2C_DMAError; - - /* Set the unused DMA callbacks to NULL */ - hi2c->hdmatx->XferHalfCpltCallback = NULL; - hi2c->hdmatx->XferAbortCallback = NULL; - - /* Enable the DMA channel */ - dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)pData, (uint32_t)&hi2c->Instance->TXDR, - hi2c->XferSize); - } - else - { - /* Update I2C state */ - hi2c->State = HAL_I2C_STATE_READY; - hi2c->Mode = HAL_I2C_MODE_NONE; - - /* Update I2C error code */ - hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_ERROR; - } - - if (dmaxferstatus == HAL_OK) - { - /* Send Slave Address and set NBYTES to write */ - I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, xferrequest); - - /* Update XferCount value */ - hi2c->XferCount -= hi2c->XferSize; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - /* Note : The I2C interrupts must be enabled after unlocking current process - to avoid the risk of I2C interrupt handle execution before current - process unlock */ - /* Enable ERR and NACK interrupts */ - I2C_Enable_IRQ(hi2c, I2C_XFER_ERROR_IT); - - /* Enable DMA Request */ - hi2c->Instance->CR1 |= I2C_CR1_TXDMAEN; - } - else - { - /* Update I2C state */ - hi2c->State = HAL_I2C_STATE_READY; - hi2c->Mode = HAL_I2C_MODE_NONE; - - /* Update I2C error code */ - hi2c->ErrorCode |= HAL_I2C_ERROR_DMA; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_ERROR; - } - } - else - { - /* Update Transfer ISR function pointer */ - hi2c->XferISR = I2C_Master_ISR_IT; - - /* Send Slave Address */ - /* Set NBYTES to write and generate START condition */ - I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, - I2C_GENERATE_START_WRITE); - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - /* Note : The I2C interrupts must be enabled after unlocking current process - to avoid the risk of I2C interrupt handle execution before current - process unlock */ - /* Enable ERR, TC, STOP, NACK, TXI interrupt */ - /* possible to enable all of these */ - /* I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | - I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */ - I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT); - } - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Sequential receive in master I2C mode an amount of data in non-blocking mode with Interrupt - * @note This interface allow to manage repeated start condition when a direction change during transfer - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @param DevAddress Target device address: The device 7 bits address value - * in datasheet must be shifted to the left before calling the interface - * @param pData Pointer to data buffer - * @param Size Amount of data to be sent - * @param XferOptions Options of Transfer, value of @ref I2C_XFEROPTIONS - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2C_Master_Seq_Receive_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, - uint16_t Size, uint32_t XferOptions) -{ - uint32_t xfermode; - uint32_t xferrequest = I2C_GENERATE_START_READ; - - /* Check the parameters */ - assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions)); - - if (hi2c->State == HAL_I2C_STATE_READY) - { - /* Process Locked */ - __HAL_LOCK(hi2c); - - hi2c->State = HAL_I2C_STATE_BUSY_RX; - hi2c->Mode = HAL_I2C_MODE_MASTER; - hi2c->ErrorCode = HAL_I2C_ERROR_NONE; - - /* Prepare transfer parameters */ - hi2c->pBuffPtr = pData; - hi2c->XferCount = Size; - hi2c->XferOptions = XferOptions; - hi2c->XferISR = I2C_Master_ISR_IT; - - /* If hi2c->XferCount > MAX_NBYTE_SIZE, use reload mode */ - if (hi2c->XferCount > MAX_NBYTE_SIZE) - { - hi2c->XferSize = MAX_NBYTE_SIZE; - xfermode = I2C_RELOAD_MODE; - } - else - { - hi2c->XferSize = hi2c->XferCount; - xfermode = hi2c->XferOptions; - } - - /* If transfer direction not change and there is no request to start another frame, - do not generate Restart Condition */ - /* Mean Previous state is same as current state */ - if ((hi2c->PreviousState == I2C_STATE_MASTER_BUSY_RX) && \ - (IS_I2C_TRANSFER_OTHER_OPTIONS_REQUEST(XferOptions) == 0)) - { - xferrequest = I2C_NO_STARTSTOP; - } - else - { - /* Convert OTHER_xxx XferOptions if any */ - I2C_ConvertOtherXferOptions(hi2c); - - /* Update xfermode accordingly if no reload is necessary */ - if (hi2c->XferCount <= MAX_NBYTE_SIZE) - { - xfermode = hi2c->XferOptions; - } - } - - /* Send Slave Address and set NBYTES to read */ - I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, xferrequest); - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - /* Note : The I2C interrupts must be enabled after unlocking current process - to avoid the risk of I2C interrupt handle execution before current - process unlock */ - I2C_Enable_IRQ(hi2c, I2C_XFER_RX_IT); - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Sequential receive in master I2C mode an amount of data in non-blocking mode with DMA - * @note This interface allow to manage repeated start condition when a direction change during transfer - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @param DevAddress Target device address: The device 7 bits address value - * in datasheet must be shifted to the left before calling the interface - * @param pData Pointer to data buffer - * @param Size Amount of data to be sent - * @param XferOptions Options of Transfer, value of @ref I2C_XFEROPTIONS - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2C_Master_Seq_Receive_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, - uint16_t Size, uint32_t XferOptions) -{ - uint32_t xfermode; - uint32_t xferrequest = I2C_GENERATE_START_READ; - HAL_StatusTypeDef dmaxferstatus; - - /* Check the parameters */ - assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions)); - - if (hi2c->State == HAL_I2C_STATE_READY) - { - /* Process Locked */ - __HAL_LOCK(hi2c); - - hi2c->State = HAL_I2C_STATE_BUSY_RX; - hi2c->Mode = HAL_I2C_MODE_MASTER; - hi2c->ErrorCode = HAL_I2C_ERROR_NONE; - - /* Prepare transfer parameters */ - hi2c->pBuffPtr = pData; - hi2c->XferCount = Size; - hi2c->XferOptions = XferOptions; - hi2c->XferISR = I2C_Master_ISR_DMA; - - /* If hi2c->XferCount > MAX_NBYTE_SIZE, use reload mode */ - if (hi2c->XferCount > MAX_NBYTE_SIZE) - { - hi2c->XferSize = MAX_NBYTE_SIZE; - xfermode = I2C_RELOAD_MODE; - } - else - { - hi2c->XferSize = hi2c->XferCount; - xfermode = hi2c->XferOptions; - } - - /* If transfer direction not change and there is no request to start another frame, - do not generate Restart Condition */ - /* Mean Previous state is same as current state */ - if ((hi2c->PreviousState == I2C_STATE_MASTER_BUSY_RX) && \ - (IS_I2C_TRANSFER_OTHER_OPTIONS_REQUEST(XferOptions) == 0)) - { - xferrequest = I2C_NO_STARTSTOP; - } - else - { - /* Convert OTHER_xxx XferOptions if any */ - I2C_ConvertOtherXferOptions(hi2c); - - /* Update xfermode accordingly if no reload is necessary */ - if (hi2c->XferCount <= MAX_NBYTE_SIZE) - { - xfermode = hi2c->XferOptions; - } - } - - if (hi2c->XferSize > 0U) - { - if (hi2c->hdmarx != NULL) - { - /* Set the I2C DMA transfer complete callback */ - hi2c->hdmarx->XferCpltCallback = I2C_DMAMasterReceiveCplt; - - /* Set the DMA error callback */ - hi2c->hdmarx->XferErrorCallback = I2C_DMAError; - - /* Set the unused DMA callbacks to NULL */ - hi2c->hdmarx->XferHalfCpltCallback = NULL; - hi2c->hdmarx->XferAbortCallback = NULL; - - /* Enable the DMA channel */ - dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmarx, (uint32_t)&hi2c->Instance->RXDR, (uint32_t)pData, - hi2c->XferSize); - } - else - { - /* Update I2C state */ - hi2c->State = HAL_I2C_STATE_READY; - hi2c->Mode = HAL_I2C_MODE_NONE; - - /* Update I2C error code */ - hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_ERROR; - } - - if (dmaxferstatus == HAL_OK) - { - /* Send Slave Address and set NBYTES to read */ - I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, xferrequest); - - /* Update XferCount value */ - hi2c->XferCount -= hi2c->XferSize; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - /* Note : The I2C interrupts must be enabled after unlocking current process - to avoid the risk of I2C interrupt handle execution before current - process unlock */ - /* Enable ERR and NACK interrupts */ - I2C_Enable_IRQ(hi2c, I2C_XFER_ERROR_IT); - - /* Enable DMA Request */ - hi2c->Instance->CR1 |= I2C_CR1_RXDMAEN; - } - else - { - /* Update I2C state */ - hi2c->State = HAL_I2C_STATE_READY; - hi2c->Mode = HAL_I2C_MODE_NONE; - - /* Update I2C error code */ - hi2c->ErrorCode |= HAL_I2C_ERROR_DMA; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_ERROR; - } - } - else - { - /* Update Transfer ISR function pointer */ - hi2c->XferISR = I2C_Master_ISR_IT; - - /* Send Slave Address */ - /* Set NBYTES to read and generate START condition */ - I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, - I2C_GENERATE_START_READ); - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - /* Note : The I2C interrupts must be enabled after unlocking current process - to avoid the risk of I2C interrupt handle execution before current - process unlock */ - /* Enable ERR, TC, STOP, NACK, TXI interrupt */ - /* possible to enable all of these */ - /* I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | - I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */ - I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT); - } - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Sequential transmit in slave/device I2C mode an amount of data in non-blocking mode with Interrupt - * @note This interface allow to manage repeated start condition when a direction change during transfer - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @param pData Pointer to data buffer - * @param Size Amount of data to be sent - * @param XferOptions Options of Transfer, value of @ref I2C_XFEROPTIONS - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2C_Slave_Seq_Transmit_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, - uint32_t XferOptions) -{ - /* Check the parameters */ - assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions)); - - if (((uint32_t)hi2c->State & (uint32_t)HAL_I2C_STATE_LISTEN) == (uint32_t)HAL_I2C_STATE_LISTEN) - { - if ((pData == NULL) || (Size == 0U)) - { - hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; - return HAL_ERROR; - } - - /* Disable Interrupts, to prevent preemption during treatment in case of multicall */ - I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT | I2C_XFER_TX_IT); - - /* Process Locked */ - __HAL_LOCK(hi2c); - - /* I2C cannot manage full duplex exchange so disable previous IT enabled if any */ - /* and then toggle the HAL slave RX state to TX state */ - if (hi2c->State == HAL_I2C_STATE_BUSY_RX_LISTEN) - { - /* Disable associated Interrupts */ - I2C_Disable_IRQ(hi2c, I2C_XFER_RX_IT); - - /* Abort DMA Xfer if any */ - if ((hi2c->Instance->CR1 & I2C_CR1_RXDMAEN) == I2C_CR1_RXDMAEN) - { - hi2c->Instance->CR1 &= ~I2C_CR1_RXDMAEN; - - if (hi2c->hdmarx != NULL) - { - /* Set the I2C DMA Abort callback : - will lead to call HAL_I2C_ErrorCallback() at end of DMA abort procedure */ - hi2c->hdmarx->XferAbortCallback = I2C_DMAAbort; - - /* Abort DMA RX */ - if (HAL_DMA_Abort_IT(hi2c->hdmarx) != HAL_OK) - { - /* Call Directly XferAbortCallback function in case of error */ - hi2c->hdmarx->XferAbortCallback(hi2c->hdmarx); - } - } - } - } - - hi2c->State = HAL_I2C_STATE_BUSY_TX_LISTEN; - hi2c->Mode = HAL_I2C_MODE_SLAVE; - hi2c->ErrorCode = HAL_I2C_ERROR_NONE; - - /* Enable Address Acknowledge */ - hi2c->Instance->CR2 &= ~I2C_CR2_NACK; - - /* Prepare transfer parameters */ - hi2c->pBuffPtr = pData; - hi2c->XferCount = Size; - hi2c->XferSize = hi2c->XferCount; - hi2c->XferOptions = XferOptions; - hi2c->XferISR = I2C_Slave_ISR_IT; - - if (I2C_GET_DIR(hi2c) == I2C_DIRECTION_RECEIVE) - { - /* Clear ADDR flag after prepare the transfer parameters */ - /* This action will generate an acknowledge to the Master */ - __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR); - } - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - /* Note : The I2C interrupts must be enabled after unlocking current process - to avoid the risk of I2C interrupt handle execution before current - process unlock */ - /* REnable ADDR interrupt */ - I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT | I2C_XFER_LISTEN_IT); - - return HAL_OK; - } - else - { - return HAL_ERROR; - } -} - -/** - * @brief Sequential transmit in slave/device I2C mode an amount of data in non-blocking mode with DMA - * @note This interface allow to manage repeated start condition when a direction change during transfer - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @param pData Pointer to data buffer - * @param Size Amount of data to be sent - * @param XferOptions Options of Transfer, value of @ref I2C_XFEROPTIONS - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2C_Slave_Seq_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, - uint32_t XferOptions) -{ - HAL_StatusTypeDef dmaxferstatus; - - /* Check the parameters */ - assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions)); - - if (((uint32_t)hi2c->State & (uint32_t)HAL_I2C_STATE_LISTEN) == (uint32_t)HAL_I2C_STATE_LISTEN) - { - if ((pData == NULL) || (Size == 0U)) - { - hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; - return HAL_ERROR; - } - - /* Process Locked */ - __HAL_LOCK(hi2c); - - /* Disable Interrupts, to prevent preemption during treatment in case of multicall */ - I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT | I2C_XFER_TX_IT); - - /* I2C cannot manage full duplex exchange so disable previous IT enabled if any */ - /* and then toggle the HAL slave RX state to TX state */ - if (hi2c->State == HAL_I2C_STATE_BUSY_RX_LISTEN) - { - /* Disable associated Interrupts */ - I2C_Disable_IRQ(hi2c, I2C_XFER_RX_IT); - - if ((hi2c->Instance->CR1 & I2C_CR1_RXDMAEN) == I2C_CR1_RXDMAEN) - { - /* Abort DMA Xfer if any */ - if (hi2c->hdmarx != NULL) - { - hi2c->Instance->CR1 &= ~I2C_CR1_RXDMAEN; - - /* Set the I2C DMA Abort callback : - will lead to call HAL_I2C_ErrorCallback() at end of DMA abort procedure */ - hi2c->hdmarx->XferAbortCallback = I2C_DMAAbort; - - /* Abort DMA RX */ - if (HAL_DMA_Abort_IT(hi2c->hdmarx) != HAL_OK) - { - /* Call Directly XferAbortCallback function in case of error */ - hi2c->hdmarx->XferAbortCallback(hi2c->hdmarx); - } - } - } - } - else if (hi2c->State == HAL_I2C_STATE_BUSY_TX_LISTEN) - { - if ((hi2c->Instance->CR1 & I2C_CR1_TXDMAEN) == I2C_CR1_TXDMAEN) - { - hi2c->Instance->CR1 &= ~I2C_CR1_TXDMAEN; - - /* Abort DMA Xfer if any */ - if (hi2c->hdmatx != NULL) - { - /* Set the I2C DMA Abort callback : - will lead to call HAL_I2C_ErrorCallback() at end of DMA abort procedure */ - hi2c->hdmatx->XferAbortCallback = I2C_DMAAbort; - - /* Abort DMA TX */ - if (HAL_DMA_Abort_IT(hi2c->hdmatx) != HAL_OK) - { - /* Call Directly XferAbortCallback function in case of error */ - hi2c->hdmatx->XferAbortCallback(hi2c->hdmatx); - } - } - } - } - else - { - /* Nothing to do */ - } - - hi2c->State = HAL_I2C_STATE_BUSY_TX_LISTEN; - hi2c->Mode = HAL_I2C_MODE_SLAVE; - hi2c->ErrorCode = HAL_I2C_ERROR_NONE; - - /* Enable Address Acknowledge */ - hi2c->Instance->CR2 &= ~I2C_CR2_NACK; - - /* Prepare transfer parameters */ - hi2c->pBuffPtr = pData; - hi2c->XferCount = Size; - hi2c->XferSize = hi2c->XferCount; - hi2c->XferOptions = XferOptions; - hi2c->XferISR = I2C_Slave_ISR_DMA; - - if (hi2c->hdmatx != NULL) - { - /* Set the I2C DMA transfer complete callback */ - hi2c->hdmatx->XferCpltCallback = I2C_DMASlaveTransmitCplt; - - /* Set the DMA error callback */ - hi2c->hdmatx->XferErrorCallback = I2C_DMAError; - - /* Set the unused DMA callbacks to NULL */ - hi2c->hdmatx->XferHalfCpltCallback = NULL; - hi2c->hdmatx->XferAbortCallback = NULL; - - /* Enable the DMA channel */ - dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)pData, (uint32_t)&hi2c->Instance->TXDR, - hi2c->XferSize); - } - else - { - /* Update I2C state */ - hi2c->State = HAL_I2C_STATE_LISTEN; - hi2c->Mode = HAL_I2C_MODE_NONE; - - /* Update I2C error code */ - hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_ERROR; - } - - if (dmaxferstatus == HAL_OK) - { - /* Update XferCount value */ - hi2c->XferCount -= hi2c->XferSize; - - /* Reset XferSize */ - hi2c->XferSize = 0; - } - else - { - /* Update I2C state */ - hi2c->State = HAL_I2C_STATE_LISTEN; - hi2c->Mode = HAL_I2C_MODE_NONE; - - /* Update I2C error code */ - hi2c->ErrorCode |= HAL_I2C_ERROR_DMA; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_ERROR; - } - - if (I2C_GET_DIR(hi2c) == I2C_DIRECTION_RECEIVE) - { - /* Clear ADDR flag after prepare the transfer parameters */ - /* This action will generate an acknowledge to the Master */ - __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR); - } - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - /* Enable DMA Request */ - hi2c->Instance->CR1 |= I2C_CR1_TXDMAEN; - - /* Note : The I2C interrupts must be enabled after unlocking current process - to avoid the risk of I2C interrupt handle execution before current - process unlock */ - /* Enable ERR, STOP, NACK, ADDR interrupts */ - I2C_Enable_IRQ(hi2c, I2C_XFER_LISTEN_IT); - - return HAL_OK; - } - else - { - return HAL_ERROR; - } -} - -/** - * @brief Sequential receive in slave/device I2C mode an amount of data in non-blocking mode with Interrupt - * @note This interface allow to manage repeated start condition when a direction change during transfer - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @param pData Pointer to data buffer - * @param Size Amount of data to be sent - * @param XferOptions Options of Transfer, value of @ref I2C_XFEROPTIONS - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2C_Slave_Seq_Receive_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, - uint32_t XferOptions) -{ - /* Check the parameters */ - assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions)); - - if (((uint32_t)hi2c->State & (uint32_t)HAL_I2C_STATE_LISTEN) == (uint32_t)HAL_I2C_STATE_LISTEN) - { - if ((pData == NULL) || (Size == 0U)) - { - hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; - return HAL_ERROR; - } - - /* Disable Interrupts, to prevent preemption during treatment in case of multicall */ - I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT | I2C_XFER_RX_IT); - - /* Process Locked */ - __HAL_LOCK(hi2c); - - /* I2C cannot manage full duplex exchange so disable previous IT enabled if any */ - /* and then toggle the HAL slave TX state to RX state */ - if (hi2c->State == HAL_I2C_STATE_BUSY_TX_LISTEN) - { - /* Disable associated Interrupts */ - I2C_Disable_IRQ(hi2c, I2C_XFER_TX_IT); - - if ((hi2c->Instance->CR1 & I2C_CR1_TXDMAEN) == I2C_CR1_TXDMAEN) - { - hi2c->Instance->CR1 &= ~I2C_CR1_TXDMAEN; - - /* Abort DMA Xfer if any */ - if (hi2c->hdmatx != NULL) - { - /* Set the I2C DMA Abort callback : - will lead to call HAL_I2C_ErrorCallback() at end of DMA abort procedure */ - hi2c->hdmatx->XferAbortCallback = I2C_DMAAbort; - - /* Abort DMA TX */ - if (HAL_DMA_Abort_IT(hi2c->hdmatx) != HAL_OK) - { - /* Call Directly XferAbortCallback function in case of error */ - hi2c->hdmatx->XferAbortCallback(hi2c->hdmatx); - } - } - } - } - - hi2c->State = HAL_I2C_STATE_BUSY_RX_LISTEN; - hi2c->Mode = HAL_I2C_MODE_SLAVE; - hi2c->ErrorCode = HAL_I2C_ERROR_NONE; - - /* Enable Address Acknowledge */ - hi2c->Instance->CR2 &= ~I2C_CR2_NACK; - - /* Prepare transfer parameters */ - hi2c->pBuffPtr = pData; - hi2c->XferCount = Size; - hi2c->XferSize = hi2c->XferCount; - hi2c->XferOptions = XferOptions; - hi2c->XferISR = I2C_Slave_ISR_IT; - - if (I2C_GET_DIR(hi2c) == I2C_DIRECTION_TRANSMIT) - { - /* Clear ADDR flag after prepare the transfer parameters */ - /* This action will generate an acknowledge to the Master */ - __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR); - } - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - /* Note : The I2C interrupts must be enabled after unlocking current process - to avoid the risk of I2C interrupt handle execution before current - process unlock */ - /* REnable ADDR interrupt */ - I2C_Enable_IRQ(hi2c, I2C_XFER_RX_IT | I2C_XFER_LISTEN_IT); - - return HAL_OK; - } - else - { - return HAL_ERROR; - } -} - -/** - * @brief Sequential receive in slave/device I2C mode an amount of data in non-blocking mode with DMA - * @note This interface allow to manage repeated start condition when a direction change during transfer - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @param pData Pointer to data buffer - * @param Size Amount of data to be sent - * @param XferOptions Options of Transfer, value of @ref I2C_XFEROPTIONS - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2C_Slave_Seq_Receive_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, - uint32_t XferOptions) -{ - HAL_StatusTypeDef dmaxferstatus; - - /* Check the parameters */ - assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions)); - - if (((uint32_t)hi2c->State & (uint32_t)HAL_I2C_STATE_LISTEN) == (uint32_t)HAL_I2C_STATE_LISTEN) - { - if ((pData == NULL) || (Size == 0U)) - { - hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; - return HAL_ERROR; - } - - /* Disable Interrupts, to prevent preemption during treatment in case of multicall */ - I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT | I2C_XFER_RX_IT); - - /* Process Locked */ - __HAL_LOCK(hi2c); - - /* I2C cannot manage full duplex exchange so disable previous IT enabled if any */ - /* and then toggle the HAL slave TX state to RX state */ - if (hi2c->State == HAL_I2C_STATE_BUSY_TX_LISTEN) - { - /* Disable associated Interrupts */ - I2C_Disable_IRQ(hi2c, I2C_XFER_TX_IT); - - if ((hi2c->Instance->CR1 & I2C_CR1_TXDMAEN) == I2C_CR1_TXDMAEN) - { - /* Abort DMA Xfer if any */ - if (hi2c->hdmatx != NULL) - { - hi2c->Instance->CR1 &= ~I2C_CR1_TXDMAEN; - - /* Set the I2C DMA Abort callback : - will lead to call HAL_I2C_ErrorCallback() at end of DMA abort procedure */ - hi2c->hdmatx->XferAbortCallback = I2C_DMAAbort; - - /* Abort DMA TX */ - if (HAL_DMA_Abort_IT(hi2c->hdmatx) != HAL_OK) - { - /* Call Directly XferAbortCallback function in case of error */ - hi2c->hdmatx->XferAbortCallback(hi2c->hdmatx); - } - } - } - } - else if (hi2c->State == HAL_I2C_STATE_BUSY_RX_LISTEN) - { - if ((hi2c->Instance->CR1 & I2C_CR1_RXDMAEN) == I2C_CR1_RXDMAEN) - { - hi2c->Instance->CR1 &= ~I2C_CR1_RXDMAEN; - - /* Abort DMA Xfer if any */ - if (hi2c->hdmarx != NULL) - { - /* Set the I2C DMA Abort callback : - will lead to call HAL_I2C_ErrorCallback() at end of DMA abort procedure */ - hi2c->hdmarx->XferAbortCallback = I2C_DMAAbort; - - /* Abort DMA RX */ - if (HAL_DMA_Abort_IT(hi2c->hdmarx) != HAL_OK) - { - /* Call Directly XferAbortCallback function in case of error */ - hi2c->hdmarx->XferAbortCallback(hi2c->hdmarx); - } - } - } - } - else - { - /* Nothing to do */ - } - - hi2c->State = HAL_I2C_STATE_BUSY_RX_LISTEN; - hi2c->Mode = HAL_I2C_MODE_SLAVE; - hi2c->ErrorCode = HAL_I2C_ERROR_NONE; - - /* Enable Address Acknowledge */ - hi2c->Instance->CR2 &= ~I2C_CR2_NACK; - - /* Prepare transfer parameters */ - hi2c->pBuffPtr = pData; - hi2c->XferCount = Size; - hi2c->XferSize = hi2c->XferCount; - hi2c->XferOptions = XferOptions; - hi2c->XferISR = I2C_Slave_ISR_DMA; - - if (hi2c->hdmarx != NULL) - { - /* Set the I2C DMA transfer complete callback */ - hi2c->hdmarx->XferCpltCallback = I2C_DMASlaveReceiveCplt; - - /* Set the DMA error callback */ - hi2c->hdmarx->XferErrorCallback = I2C_DMAError; - - /* Set the unused DMA callbacks to NULL */ - hi2c->hdmarx->XferHalfCpltCallback = NULL; - hi2c->hdmarx->XferAbortCallback = NULL; - - /* Enable the DMA channel */ - dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmarx, (uint32_t)&hi2c->Instance->RXDR, - (uint32_t)pData, hi2c->XferSize); - } - else - { - /* Update I2C state */ - hi2c->State = HAL_I2C_STATE_LISTEN; - hi2c->Mode = HAL_I2C_MODE_NONE; - - /* Update I2C error code */ - hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_ERROR; - } - - if (dmaxferstatus == HAL_OK) - { - /* Update XferCount value */ - hi2c->XferCount -= hi2c->XferSize; - - /* Reset XferSize */ - hi2c->XferSize = 0; - } - else - { - /* Update I2C state */ - hi2c->State = HAL_I2C_STATE_LISTEN; - hi2c->Mode = HAL_I2C_MODE_NONE; - - /* Update I2C error code */ - hi2c->ErrorCode |= HAL_I2C_ERROR_DMA; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_ERROR; - } - - if (I2C_GET_DIR(hi2c) == I2C_DIRECTION_TRANSMIT) - { - /* Clear ADDR flag after prepare the transfer parameters */ - /* This action will generate an acknowledge to the Master */ - __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR); - } - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - /* Enable DMA Request */ - hi2c->Instance->CR1 |= I2C_CR1_RXDMAEN; - - /* Note : The I2C interrupts must be enabled after unlocking current process - to avoid the risk of I2C interrupt handle execution before current - process unlock */ - /* REnable ADDR interrupt */ - I2C_Enable_IRQ(hi2c, I2C_XFER_RX_IT | I2C_XFER_LISTEN_IT); - - return HAL_OK; - } - else - { - return HAL_ERROR; - } -} - -/** - * @brief Enable the Address listen mode with Interrupt. - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2C_EnableListen_IT(I2C_HandleTypeDef *hi2c) -{ - if (hi2c->State == HAL_I2C_STATE_READY) - { - hi2c->State = HAL_I2C_STATE_LISTEN; - hi2c->XferISR = I2C_Slave_ISR_IT; - - /* Enable the Address Match interrupt */ - I2C_Enable_IRQ(hi2c, I2C_XFER_LISTEN_IT); - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Disable the Address listen mode with Interrupt. - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2C_DisableListen_IT(I2C_HandleTypeDef *hi2c) -{ - /* Declaration of tmp to prevent undefined behavior of volatile usage */ - uint32_t tmp; - - /* Disable Address listen mode only if a transfer is not ongoing */ - if (hi2c->State == HAL_I2C_STATE_LISTEN) - { - tmp = (uint32_t)(hi2c->State) & I2C_STATE_MSK; - hi2c->PreviousState = tmp | (uint32_t)(hi2c->Mode); - hi2c->State = HAL_I2C_STATE_READY; - hi2c->Mode = HAL_I2C_MODE_NONE; - hi2c->XferISR = NULL; - - /* Disable the Address Match interrupt */ - I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT); - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Abort a master I2C IT or DMA process communication with Interrupt. - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @param DevAddress Target device address: The device 7 bits address value - * in datasheet must be shifted to the left before calling the interface - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2C_Master_Abort_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress) -{ - if (hi2c->Mode == HAL_I2C_MODE_MASTER) - { - /* Process Locked */ - __HAL_LOCK(hi2c); - - /* Disable Interrupts and Store Previous state */ - if (hi2c->State == HAL_I2C_STATE_BUSY_TX) - { - I2C_Disable_IRQ(hi2c, I2C_XFER_TX_IT); - hi2c->PreviousState = I2C_STATE_MASTER_BUSY_TX; - } - else if (hi2c->State == HAL_I2C_STATE_BUSY_RX) - { - I2C_Disable_IRQ(hi2c, I2C_XFER_RX_IT); - hi2c->PreviousState = I2C_STATE_MASTER_BUSY_RX; - } - else - { - /* Do nothing */ - } - - /* Set State at HAL_I2C_STATE_ABORT */ - hi2c->State = HAL_I2C_STATE_ABORT; - - /* Set NBYTES to 1 to generate a dummy read on I2C peripheral */ - /* Set AUTOEND mode, this will generate a NACK then STOP condition to abort the current transfer */ - I2C_TransferConfig(hi2c, DevAddress, 1, I2C_AUTOEND_MODE, I2C_GENERATE_STOP); - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - /* Note : The I2C interrupts must be enabled after unlocking current process - to avoid the risk of I2C interrupt handle execution before current - process unlock */ - I2C_Enable_IRQ(hi2c, I2C_XFER_CPLT_IT); - - return HAL_OK; - } - else - { - /* Wrong usage of abort function */ - /* This function should be used only in case of abort monitored by master device */ - return HAL_ERROR; - } -} - -/** - * @} - */ - -/** @defgroup I2C_IRQ_Handler_and_Callbacks IRQ Handler and Callbacks - * @{ - */ - -/** - * @brief This function handles I2C event interrupt request. - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @retval None - */ -void HAL_I2C_EV_IRQHandler(I2C_HandleTypeDef *hi2c) -{ - /* Get current IT Flags and IT sources value */ - uint32_t itflags = READ_REG(hi2c->Instance->ISR); - uint32_t itsources = READ_REG(hi2c->Instance->CR1); - - /* I2C events treatment -------------------------------------*/ - if (hi2c->XferISR != NULL) - { - hi2c->XferISR(hi2c, itflags, itsources); - } -} - -/** - * @brief This function handles I2C error interrupt request. - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @retval None - */ -void HAL_I2C_ER_IRQHandler(I2C_HandleTypeDef *hi2c) -{ - uint32_t itflags = READ_REG(hi2c->Instance->ISR); - uint32_t itsources = READ_REG(hi2c->Instance->CR1); - uint32_t tmperror; - - /* I2C Bus error interrupt occurred ------------------------------------*/ - if ((I2C_CHECK_FLAG(itflags, I2C_FLAG_BERR) != RESET) && \ - (I2C_CHECK_IT_SOURCE(itsources, I2C_IT_ERRI) != RESET)) - { - hi2c->ErrorCode |= HAL_I2C_ERROR_BERR; - - /* Clear BERR flag */ - __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_BERR); - } - - /* I2C Over-Run/Under-Run interrupt occurred ----------------------------------------*/ - if ((I2C_CHECK_FLAG(itflags, I2C_FLAG_OVR) != RESET) && \ - (I2C_CHECK_IT_SOURCE(itsources, I2C_IT_ERRI) != RESET)) - { - hi2c->ErrorCode |= HAL_I2C_ERROR_OVR; - - /* Clear OVR flag */ - __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_OVR); - } - - /* I2C Arbitration Loss error interrupt occurred -------------------------------------*/ - if ((I2C_CHECK_FLAG(itflags, I2C_FLAG_ARLO) != RESET) && \ - (I2C_CHECK_IT_SOURCE(itsources, I2C_IT_ERRI) != RESET)) - { - hi2c->ErrorCode |= HAL_I2C_ERROR_ARLO; - - /* Clear ARLO flag */ - __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ARLO); - } - - /* Store current volatile hi2c->ErrorCode, misra rule */ - tmperror = hi2c->ErrorCode; - - /* Call the Error Callback in case of Error detected */ - if ((tmperror & (HAL_I2C_ERROR_BERR | HAL_I2C_ERROR_OVR | HAL_I2C_ERROR_ARLO)) != HAL_I2C_ERROR_NONE) - { - I2C_ITError(hi2c, tmperror); - } -} - -/** - * @brief Master Tx Transfer completed callback. - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @retval None - */ -__weak void HAL_I2C_MasterTxCpltCallback(I2C_HandleTypeDef *hi2c) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hi2c); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_I2C_MasterTxCpltCallback could be implemented in the user file - */ -} - -/** - * @brief Master Rx Transfer completed callback. - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @retval None - */ -__weak void HAL_I2C_MasterRxCpltCallback(I2C_HandleTypeDef *hi2c) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hi2c); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_I2C_MasterRxCpltCallback could be implemented in the user file - */ -} - -/** @brief Slave Tx Transfer completed callback. - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @retval None - */ -__weak void HAL_I2C_SlaveTxCpltCallback(I2C_HandleTypeDef *hi2c) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hi2c); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_I2C_SlaveTxCpltCallback could be implemented in the user file - */ -} - -/** - * @brief Slave Rx Transfer completed callback. - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @retval None - */ -__weak void HAL_I2C_SlaveRxCpltCallback(I2C_HandleTypeDef *hi2c) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hi2c); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_I2C_SlaveRxCpltCallback could be implemented in the user file - */ -} - -/** - * @brief Slave Address Match callback. - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @param TransferDirection Master request Transfer Direction (Write/Read), value of @ref I2C_XFERDIRECTION - * @param AddrMatchCode Address Match Code - * @retval None - */ -__weak void HAL_I2C_AddrCallback(I2C_HandleTypeDef *hi2c, uint8_t TransferDirection, uint16_t AddrMatchCode) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hi2c); - UNUSED(TransferDirection); - UNUSED(AddrMatchCode); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_I2C_AddrCallback() could be implemented in the user file - */ -} - -/** - * @brief Listen Complete callback. - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @retval None - */ -__weak void HAL_I2C_ListenCpltCallback(I2C_HandleTypeDef *hi2c) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hi2c); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_I2C_ListenCpltCallback() could be implemented in the user file - */ -} - -/** - * @brief Memory Tx Transfer completed callback. - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @retval None - */ -__weak void HAL_I2C_MemTxCpltCallback(I2C_HandleTypeDef *hi2c) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hi2c); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_I2C_MemTxCpltCallback could be implemented in the user file - */ -} - -/** - * @brief Memory Rx Transfer completed callback. - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @retval None - */ -__weak void HAL_I2C_MemRxCpltCallback(I2C_HandleTypeDef *hi2c) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hi2c); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_I2C_MemRxCpltCallback could be implemented in the user file - */ -} - -/** - * @brief I2C error callback. - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @retval None - */ -__weak void HAL_I2C_ErrorCallback(I2C_HandleTypeDef *hi2c) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hi2c); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_I2C_ErrorCallback could be implemented in the user file - */ -} - -/** - * @brief I2C abort callback. - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @retval None - */ -__weak void HAL_I2C_AbortCpltCallback(I2C_HandleTypeDef *hi2c) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hi2c); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_I2C_AbortCpltCallback could be implemented in the user file - */ -} - -/** - * @} - */ - -/** @defgroup I2C_Exported_Functions_Group3 Peripheral State, Mode and Error functions - * @brief Peripheral State, Mode and Error functions - * -@verbatim - =============================================================================== - ##### Peripheral State, Mode and Error functions ##### - =============================================================================== - [..] - This subsection permit to get in run-time the status of the peripheral - and the data flow. - -@endverbatim - * @{ - */ - -/** - * @brief Return the I2C handle state. - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @retval HAL state - */ -HAL_I2C_StateTypeDef HAL_I2C_GetState(I2C_HandleTypeDef *hi2c) -{ - /* Return I2C handle state */ - return hi2c->State; -} - -/** - * @brief Returns the I2C Master, Slave, Memory or no mode. - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for I2C module - * @retval HAL mode - */ -HAL_I2C_ModeTypeDef HAL_I2C_GetMode(I2C_HandleTypeDef *hi2c) -{ - return hi2c->Mode; -} - -/** - * @brief Return the I2C error code. - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @retval I2C Error Code - */ -uint32_t HAL_I2C_GetError(I2C_HandleTypeDef *hi2c) -{ - return hi2c->ErrorCode; -} - -/** - * @} - */ - -/** - * @} - */ - -/** @addtogroup I2C_Private_Functions - * @{ - */ - -/** - * @brief Interrupt Sub-Routine which handle the Interrupt Flags Master Mode with Interrupt. - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @param ITFlags Interrupt flags to handle. - * @param ITSources Interrupt sources enabled. - * @retval HAL status - */ -static HAL_StatusTypeDef I2C_Master_ISR_IT(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, - uint32_t ITSources) -{ - uint16_t devaddress; - uint32_t tmpITFlags = ITFlags; - - /* Process Locked */ - __HAL_LOCK(hi2c); - - if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_AF) != RESET) && \ - (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_NACKI) != RESET)) - { - /* Clear NACK Flag */ - __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); - - /* Set corresponding Error Code */ - /* No need to generate STOP, it is automatically done */ - /* Error callback will be send during stop flag treatment */ - hi2c->ErrorCode |= HAL_I2C_ERROR_AF; - - /* Flush TX register */ - I2C_Flush_TXDR(hi2c); - } - else if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_RXNE) != RESET) && \ - (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_RXI) != RESET)) - { - /* Remove RXNE flag on temporary variable as read done */ - tmpITFlags &= ~I2C_FLAG_RXNE; - - /* Read data from RXDR */ - *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->RXDR; - - /* Increment Buffer pointer */ - hi2c->pBuffPtr++; - - hi2c->XferSize--; - hi2c->XferCount--; - } - else if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_TXIS) != RESET) && \ - (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_TXI) != RESET)) - { - /* Write data to TXDR */ - hi2c->Instance->TXDR = *hi2c->pBuffPtr; - - /* Increment Buffer pointer */ - hi2c->pBuffPtr++; - - hi2c->XferSize--; - hi2c->XferCount--; - } - else if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_TCR) != RESET) && \ - (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_TCI) != RESET)) - { - if ((hi2c->XferCount != 0U) && (hi2c->XferSize == 0U)) - { - devaddress = (uint16_t)(hi2c->Instance->CR2 & I2C_CR2_SADD); - - if (hi2c->XferCount > MAX_NBYTE_SIZE) - { - hi2c->XferSize = MAX_NBYTE_SIZE; - I2C_TransferConfig(hi2c, devaddress, (uint8_t)hi2c->XferSize, I2C_RELOAD_MODE, I2C_NO_STARTSTOP); - } - else - { - hi2c->XferSize = hi2c->XferCount; - if (hi2c->XferOptions != I2C_NO_OPTION_FRAME) - { - I2C_TransferConfig(hi2c, devaddress, (uint8_t)hi2c->XferSize, - hi2c->XferOptions, I2C_NO_STARTSTOP); - } - else - { - I2C_TransferConfig(hi2c, devaddress, (uint8_t)hi2c->XferSize, - I2C_AUTOEND_MODE, I2C_NO_STARTSTOP); - } - } - } - else - { - /* Call TxCpltCallback() if no stop mode is set */ - if (I2C_GET_STOP_MODE(hi2c) != I2C_AUTOEND_MODE) - { - /* Call I2C Master Sequential complete process */ - I2C_ITMasterSeqCplt(hi2c); - } - else - { - /* Wrong size Status regarding TCR flag event */ - /* Call the corresponding callback to inform upper layer of End of Transfer */ - I2C_ITError(hi2c, HAL_I2C_ERROR_SIZE); - } - } - } - else if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_TC) != RESET) && \ - (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_TCI) != RESET)) - { - if (hi2c->XferCount == 0U) - { - if (I2C_GET_STOP_MODE(hi2c) != I2C_AUTOEND_MODE) - { - /* Generate a stop condition in case of no transfer option */ - if (hi2c->XferOptions == I2C_NO_OPTION_FRAME) - { - /* Generate Stop */ - hi2c->Instance->CR2 |= I2C_CR2_STOP; - } - else - { - /* Call I2C Master Sequential complete process */ - I2C_ITMasterSeqCplt(hi2c); - } - } - } - else - { - /* Wrong size Status regarding TC flag event */ - /* Call the corresponding callback to inform upper layer of End of Transfer */ - I2C_ITError(hi2c, HAL_I2C_ERROR_SIZE); - } - } - else - { - /* Nothing to do */ - } - - if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_STOPF) != RESET) && \ - (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_STOPI) != RESET)) - { - /* Call I2C Master complete process */ - I2C_ITMasterCplt(hi2c, tmpITFlags); - } - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_OK; -} - -/** - * @brief Interrupt Sub-Routine which handle the Interrupt Flags Memory Mode with Interrupt. - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @param ITFlags Interrupt flags to handle. - * @param ITSources Interrupt sources enabled. - * @retval HAL status - */ -static HAL_StatusTypeDef I2C_Mem_ISR_IT(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, - uint32_t ITSources) -{ - uint32_t direction = I2C_GENERATE_START_WRITE; - uint32_t tmpITFlags = ITFlags; - - /* Process Locked */ - __HAL_LOCK(hi2c); - - if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_AF) != RESET) && \ - (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_NACKI) != RESET)) - { - /* Clear NACK Flag */ - __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); - - /* Set corresponding Error Code */ - /* No need to generate STOP, it is automatically done */ - /* Error callback will be send during stop flag treatment */ - hi2c->ErrorCode |= HAL_I2C_ERROR_AF; - - /* Flush TX register */ - I2C_Flush_TXDR(hi2c); - } - else if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_RXNE) != RESET) && \ - (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_RXI) != RESET)) - { - /* Remove RXNE flag on temporary variable as read done */ - tmpITFlags &= ~I2C_FLAG_RXNE; - - /* Read data from RXDR */ - *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->RXDR; - - /* Increment Buffer pointer */ - hi2c->pBuffPtr++; - - hi2c->XferSize--; - hi2c->XferCount--; - } - else if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_TXIS) != RESET) && \ - (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_TXI) != RESET)) - { - if (hi2c->Memaddress == 0xFFFFFFFFU) - { - /* Write data to TXDR */ - hi2c->Instance->TXDR = *hi2c->pBuffPtr; - - /* Increment Buffer pointer */ - hi2c->pBuffPtr++; - - hi2c->XferSize--; - hi2c->XferCount--; - } - else - { - /* Write LSB part of Memory Address */ - hi2c->Instance->TXDR = hi2c->Memaddress; - - /* Reset Memaddress content */ - hi2c->Memaddress = 0xFFFFFFFFU; - } - } - else if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_TCR) != RESET) && \ - (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_TCI) != RESET)) - { - if ((hi2c->XferCount != 0U) && (hi2c->XferSize == 0U)) - { - if (hi2c->XferCount > MAX_NBYTE_SIZE) - { - hi2c->XferSize = MAX_NBYTE_SIZE; - I2C_TransferConfig(hi2c, (uint16_t)hi2c->Devaddress, (uint8_t)hi2c->XferSize, - I2C_RELOAD_MODE, I2C_NO_STARTSTOP); - } - else - { - hi2c->XferSize = hi2c->XferCount; - I2C_TransferConfig(hi2c, (uint16_t)hi2c->Devaddress, (uint8_t)hi2c->XferSize, - I2C_AUTOEND_MODE, I2C_NO_STARTSTOP); - } - } - else - { - /* Wrong size Status regarding TCR flag event */ - /* Call the corresponding callback to inform upper layer of End of Transfer */ - I2C_ITError(hi2c, HAL_I2C_ERROR_SIZE); - } - } - else if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_TC) != RESET) && \ - (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_TCI) != RESET)) - { - if (hi2c->State == HAL_I2C_STATE_BUSY_RX) - { - direction = I2C_GENERATE_START_READ; - } - - if (hi2c->XferCount > MAX_NBYTE_SIZE) - { - hi2c->XferSize = MAX_NBYTE_SIZE; - - /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */ - I2C_TransferConfig(hi2c, (uint16_t)hi2c->Devaddress, (uint8_t)hi2c->XferSize, - I2C_RELOAD_MODE, direction); - } - else - { - hi2c->XferSize = hi2c->XferCount; - - /* Set NBYTES to write and generate RESTART */ - I2C_TransferConfig(hi2c, (uint16_t)hi2c->Devaddress, (uint8_t)hi2c->XferSize, - I2C_AUTOEND_MODE, direction); - } - } - else - { - /* Nothing to do */ - } - - if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_STOPF) != RESET) && \ - (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_STOPI) != RESET)) - { - /* Call I2C Master complete process */ - I2C_ITMasterCplt(hi2c, tmpITFlags); - } - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_OK; -} - -/** - * @brief Interrupt Sub-Routine which handle the Interrupt Flags Slave Mode with Interrupt. - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @param ITFlags Interrupt flags to handle. - * @param ITSources Interrupt sources enabled. - * @retval HAL status - */ -static HAL_StatusTypeDef I2C_Slave_ISR_IT(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, - uint32_t ITSources) -{ - uint32_t tmpoptions = hi2c->XferOptions; - uint32_t tmpITFlags = ITFlags; - - /* Process locked */ - __HAL_LOCK(hi2c); - - /* Check if STOPF is set */ - if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_STOPF) != RESET) && \ - (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_STOPI) != RESET)) - { - /* Call I2C Slave complete process */ - I2C_ITSlaveCplt(hi2c, tmpITFlags); - } - - if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_AF) != RESET) && \ - (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_NACKI) != RESET)) - { - /* Check that I2C transfer finished */ - /* if yes, normal use case, a NACK is sent by the MASTER when Transfer is finished */ - /* Mean XferCount == 0*/ - /* So clear Flag NACKF only */ - if (hi2c->XferCount == 0U) - { - if ((hi2c->State == HAL_I2C_STATE_LISTEN) && (tmpoptions == I2C_FIRST_AND_LAST_FRAME)) - /* Same action must be done for (tmpoptions == I2C_LAST_FRAME) which removed for - Warning[Pa134]: left and right operands are identical */ - { - /* Call I2C Listen complete process */ - I2C_ITListenCplt(hi2c, tmpITFlags); - } - else if ((hi2c->State == HAL_I2C_STATE_BUSY_TX_LISTEN) && (tmpoptions != I2C_NO_OPTION_FRAME)) - { - /* Clear NACK Flag */ - __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); - - /* Flush TX register */ - I2C_Flush_TXDR(hi2c); - - /* Last Byte is Transmitted */ - /* Call I2C Slave Sequential complete process */ - I2C_ITSlaveSeqCplt(hi2c); - } - else - { - /* Clear NACK Flag */ - __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); - } - } - else - { - /* if no, error use case, a Non-Acknowledge of last Data is generated by the MASTER*/ - /* Clear NACK Flag */ - __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); - - /* Set ErrorCode corresponding to a Non-Acknowledge */ - hi2c->ErrorCode |= HAL_I2C_ERROR_AF; - - if ((tmpoptions == I2C_FIRST_FRAME) || (tmpoptions == I2C_NEXT_FRAME)) - { - /* Call the corresponding callback to inform upper layer of End of Transfer */ - I2C_ITError(hi2c, hi2c->ErrorCode); - } - } - } - else if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_RXNE) != RESET) && \ - (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_RXI) != RESET)) - { - if (hi2c->XferCount > 0U) - { - /* Read data from RXDR */ - *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->RXDR; - - /* Increment Buffer pointer */ - hi2c->pBuffPtr++; - - hi2c->XferSize--; - hi2c->XferCount--; - } - - if ((hi2c->XferCount == 0U) && \ - (tmpoptions != I2C_NO_OPTION_FRAME)) - { - /* Call I2C Slave Sequential complete process */ - I2C_ITSlaveSeqCplt(hi2c); - } - } - else if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_ADDR) != RESET) && \ - (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_ADDRI) != RESET)) - { - I2C_ITAddrCplt(hi2c, tmpITFlags); - } - else if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_TXIS) != RESET) && \ - (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_TXI) != RESET)) - { - /* Write data to TXDR only if XferCount not reach "0" */ - /* A TXIS flag can be set, during STOP treatment */ - /* Check if all Data have already been sent */ - /* If it is the case, this last write in TXDR is not sent, correspond to a dummy TXIS event */ - if (hi2c->XferCount > 0U) - { - /* Write data to TXDR */ - hi2c->Instance->TXDR = *hi2c->pBuffPtr; - - /* Increment Buffer pointer */ - hi2c->pBuffPtr++; - - hi2c->XferCount--; - hi2c->XferSize--; - } - else - { - if ((tmpoptions == I2C_NEXT_FRAME) || (tmpoptions == I2C_FIRST_FRAME)) - { - /* Last Byte is Transmitted */ - /* Call I2C Slave Sequential complete process */ - I2C_ITSlaveSeqCplt(hi2c); - } - } - } - else - { - /* Nothing to do */ - } - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_OK; -} - -/** - * @brief Interrupt Sub-Routine which handle the Interrupt Flags Master Mode with DMA. - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @param ITFlags Interrupt flags to handle. - * @param ITSources Interrupt sources enabled. - * @retval HAL status - */ -static HAL_StatusTypeDef I2C_Master_ISR_DMA(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, - uint32_t ITSources) -{ - uint16_t devaddress; - uint32_t xfermode; - - /* Process Locked */ - __HAL_LOCK(hi2c); - - if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_AF) != RESET) && \ - (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_NACKI) != RESET)) - { - /* Clear NACK Flag */ - __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); - - /* Set corresponding Error Code */ - hi2c->ErrorCode |= HAL_I2C_ERROR_AF; - - /* No need to generate STOP, it is automatically done */ - /* But enable STOP interrupt, to treat it */ - /* Error callback will be send during stop flag treatment */ - I2C_Enable_IRQ(hi2c, I2C_XFER_CPLT_IT); - - /* Flush TX register */ - I2C_Flush_TXDR(hi2c); - } - else if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_TCR) != RESET) && \ - (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_TCI) != RESET)) - { - /* Disable TC interrupt */ - __HAL_I2C_DISABLE_IT(hi2c, I2C_IT_TCI); - - if (hi2c->XferCount != 0U) - { - /* Recover Slave address */ - devaddress = (uint16_t)(hi2c->Instance->CR2 & I2C_CR2_SADD); - - /* Prepare the new XferSize to transfer */ - if (hi2c->XferCount > MAX_NBYTE_SIZE) - { - hi2c->XferSize = MAX_NBYTE_SIZE; - xfermode = I2C_RELOAD_MODE; - } - else - { - hi2c->XferSize = hi2c->XferCount; - if (hi2c->XferOptions != I2C_NO_OPTION_FRAME) - { - xfermode = hi2c->XferOptions; - } - else - { - xfermode = I2C_AUTOEND_MODE; - } - } - - /* Set the new XferSize in Nbytes register */ - I2C_TransferConfig(hi2c, devaddress, (uint8_t)hi2c->XferSize, xfermode, I2C_NO_STARTSTOP); - - /* Update XferCount value */ - hi2c->XferCount -= hi2c->XferSize; - - /* Enable DMA Request */ - if (hi2c->State == HAL_I2C_STATE_BUSY_RX) - { - hi2c->Instance->CR1 |= I2C_CR1_RXDMAEN; - } - else - { - hi2c->Instance->CR1 |= I2C_CR1_TXDMAEN; - } - } - else - { - /* Call TxCpltCallback() if no stop mode is set */ - if (I2C_GET_STOP_MODE(hi2c) != I2C_AUTOEND_MODE) - { - /* Call I2C Master Sequential complete process */ - I2C_ITMasterSeqCplt(hi2c); - } - else - { - /* Wrong size Status regarding TCR flag event */ - /* Call the corresponding callback to inform upper layer of End of Transfer */ - I2C_ITError(hi2c, HAL_I2C_ERROR_SIZE); - } - } - } - else if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_TC) != RESET) && \ - (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_TCI) != RESET)) - { - if (hi2c->XferCount == 0U) - { - if (I2C_GET_STOP_MODE(hi2c) != I2C_AUTOEND_MODE) - { - /* Generate a stop condition in case of no transfer option */ - if (hi2c->XferOptions == I2C_NO_OPTION_FRAME) - { - /* Generate Stop */ - hi2c->Instance->CR2 |= I2C_CR2_STOP; - } - else - { - /* Call I2C Master Sequential complete process */ - I2C_ITMasterSeqCplt(hi2c); - } - } - } - else - { - /* Wrong size Status regarding TC flag event */ - /* Call the corresponding callback to inform upper layer of End of Transfer */ - I2C_ITError(hi2c, HAL_I2C_ERROR_SIZE); - } - } - else if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_STOPF) != RESET) && \ - (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_STOPI) != RESET)) - { - /* Call I2C Master complete process */ - I2C_ITMasterCplt(hi2c, ITFlags); - } - else - { - /* Nothing to do */ - } - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_OK; -} - -/** - * @brief Interrupt Sub-Routine which handle the Interrupt Flags Memory Mode with DMA. - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @param ITFlags Interrupt flags to handle. - * @param ITSources Interrupt sources enabled. - * @retval HAL status - */ -static HAL_StatusTypeDef I2C_Mem_ISR_DMA(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, - uint32_t ITSources) -{ - uint32_t direction = I2C_GENERATE_START_WRITE; - - /* Process Locked */ - __HAL_LOCK(hi2c); - - if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_AF) != RESET) && \ - (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_NACKI) != RESET)) - { - /* Clear NACK Flag */ - __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); - - /* Set corresponding Error Code */ - hi2c->ErrorCode |= HAL_I2C_ERROR_AF; - - /* No need to generate STOP, it is automatically done */ - /* But enable STOP interrupt, to treat it */ - /* Error callback will be send during stop flag treatment */ - I2C_Enable_IRQ(hi2c, I2C_XFER_CPLT_IT); - - /* Flush TX register */ - I2C_Flush_TXDR(hi2c); - } - else if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_TXIS) != RESET) && \ - (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_TXI) != RESET)) - { - /* Write LSB part of Memory Address */ - hi2c->Instance->TXDR = hi2c->Memaddress; - - /* Reset Memaddress content */ - hi2c->Memaddress = 0xFFFFFFFFU; - } - else if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_TCR) != RESET) && \ - (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_TCI) != RESET)) - { - /* Enable only Error interrupt */ - I2C_Enable_IRQ(hi2c, I2C_XFER_ERROR_IT); - - if (hi2c->XferCount != 0U) - { - /* Prepare the new XferSize to transfer */ - if (hi2c->XferCount > MAX_NBYTE_SIZE) - { - hi2c->XferSize = MAX_NBYTE_SIZE; - I2C_TransferConfig(hi2c, (uint16_t)hi2c->Devaddress, (uint8_t)hi2c->XferSize, - I2C_RELOAD_MODE, I2C_NO_STARTSTOP); - } - else - { - hi2c->XferSize = hi2c->XferCount; - I2C_TransferConfig(hi2c, (uint16_t)hi2c->Devaddress, (uint8_t)hi2c->XferSize, - I2C_AUTOEND_MODE, I2C_NO_STARTSTOP); - } - - /* Update XferCount value */ - hi2c->XferCount -= hi2c->XferSize; - - /* Enable DMA Request */ - if (hi2c->State == HAL_I2C_STATE_BUSY_RX) - { - hi2c->Instance->CR1 |= I2C_CR1_RXDMAEN; - } - else - { - hi2c->Instance->CR1 |= I2C_CR1_TXDMAEN; - } - } - else - { - /* Wrong size Status regarding TCR flag event */ - /* Call the corresponding callback to inform upper layer of End of Transfer */ - I2C_ITError(hi2c, HAL_I2C_ERROR_SIZE); - } - } - else if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_TC) != RESET) && \ - (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_TCI) != RESET)) - { - if (hi2c->State == HAL_I2C_STATE_BUSY_RX) - { - direction = I2C_GENERATE_START_READ; - } - - if (hi2c->XferCount > MAX_NBYTE_SIZE) - { - hi2c->XferSize = MAX_NBYTE_SIZE; - - /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */ - I2C_TransferConfig(hi2c, (uint16_t)hi2c->Devaddress, (uint8_t)hi2c->XferSize, - I2C_RELOAD_MODE, direction); - } - else - { - hi2c->XferSize = hi2c->XferCount; - - /* Set NBYTES to write and generate RESTART */ - I2C_TransferConfig(hi2c, (uint16_t)hi2c->Devaddress, (uint8_t)hi2c->XferSize, - I2C_AUTOEND_MODE, direction); - } - - /* Update XferCount value */ - hi2c->XferCount -= hi2c->XferSize; - - /* Enable DMA Request */ - if (hi2c->State == HAL_I2C_STATE_BUSY_RX) - { - hi2c->Instance->CR1 |= I2C_CR1_RXDMAEN; - } - else - { - hi2c->Instance->CR1 |= I2C_CR1_TXDMAEN; - } - } - else if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_STOPF) != RESET) && \ - (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_STOPI) != RESET)) - { - /* Call I2C Master complete process */ - I2C_ITMasterCplt(hi2c, ITFlags); - } - else - { - /* Nothing to do */ - } - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_OK; -} - -/** - * @brief Interrupt Sub-Routine which handle the Interrupt Flags Slave Mode with DMA. - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @param ITFlags Interrupt flags to handle. - * @param ITSources Interrupt sources enabled. - * @retval HAL status - */ -static HAL_StatusTypeDef I2C_Slave_ISR_DMA(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, - uint32_t ITSources) -{ - uint32_t tmpoptions = hi2c->XferOptions; - uint32_t treatdmanack = 0U; - HAL_I2C_StateTypeDef tmpstate; - - /* Process locked */ - __HAL_LOCK(hi2c); - - /* Check if STOPF is set */ - if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_STOPF) != RESET) && \ - (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_STOPI) != RESET)) - { - /* Call I2C Slave complete process */ - I2C_ITSlaveCplt(hi2c, ITFlags); - } - - if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_AF) != RESET) && \ - (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_NACKI) != RESET)) - { - /* Check that I2C transfer finished */ - /* if yes, normal use case, a NACK is sent by the MASTER when Transfer is finished */ - /* Mean XferCount == 0 */ - /* So clear Flag NACKF only */ - if ((I2C_CHECK_IT_SOURCE(ITSources, I2C_CR1_TXDMAEN) != RESET) || - (I2C_CHECK_IT_SOURCE(ITSources, I2C_CR1_RXDMAEN) != RESET)) - { - /* Split check of hdmarx, for MISRA compliance */ - if (hi2c->hdmarx != NULL) - { - if (I2C_CHECK_IT_SOURCE(ITSources, I2C_CR1_RXDMAEN) != RESET) - { - if (I2C_GET_DMA_REMAIN_DATA(hi2c->hdmarx) == 0U) - { - treatdmanack = 1U; - } - } - } - - /* Split check of hdmatx, for MISRA compliance */ - if (hi2c->hdmatx != NULL) - { - if (I2C_CHECK_IT_SOURCE(ITSources, I2C_CR1_TXDMAEN) != RESET) - { - if (I2C_GET_DMA_REMAIN_DATA(hi2c->hdmatx) == 0U) - { - treatdmanack = 1U; - } - } - } - - if (treatdmanack == 1U) - { - if ((hi2c->State == HAL_I2C_STATE_LISTEN) && (tmpoptions == I2C_FIRST_AND_LAST_FRAME)) - /* Same action must be done for (tmpoptions == I2C_LAST_FRAME) which removed for - Warning[Pa134]: left and right operands are identical */ - { - /* Call I2C Listen complete process */ - I2C_ITListenCplt(hi2c, ITFlags); - } - else if ((hi2c->State == HAL_I2C_STATE_BUSY_TX_LISTEN) && (tmpoptions != I2C_NO_OPTION_FRAME)) - { - /* Clear NACK Flag */ - __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); - - /* Flush TX register */ - I2C_Flush_TXDR(hi2c); - - /* Last Byte is Transmitted */ - /* Call I2C Slave Sequential complete process */ - I2C_ITSlaveSeqCplt(hi2c); - } - else - { - /* Clear NACK Flag */ - __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); - } - } - else - { - /* if no, error use case, a Non-Acknowledge of last Data is generated by the MASTER*/ - /* Clear NACK Flag */ - __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); - - /* Set ErrorCode corresponding to a Non-Acknowledge */ - hi2c->ErrorCode |= HAL_I2C_ERROR_AF; - - /* Store current hi2c->State, solve MISRA2012-Rule-13.5 */ - tmpstate = hi2c->State; - - if ((tmpoptions == I2C_FIRST_FRAME) || (tmpoptions == I2C_NEXT_FRAME)) - { - if ((tmpstate == HAL_I2C_STATE_BUSY_TX) || (tmpstate == HAL_I2C_STATE_BUSY_TX_LISTEN)) - { - hi2c->PreviousState = I2C_STATE_SLAVE_BUSY_TX; - } - else if ((tmpstate == HAL_I2C_STATE_BUSY_RX) || (tmpstate == HAL_I2C_STATE_BUSY_RX_LISTEN)) - { - hi2c->PreviousState = I2C_STATE_SLAVE_BUSY_RX; - } - else - { - /* Do nothing */ - } - - /* Call the corresponding callback to inform upper layer of End of Transfer */ - I2C_ITError(hi2c, hi2c->ErrorCode); - } - } - } - else - { - /* Only Clear NACK Flag, no DMA treatment is pending */ - __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); - } - } - else if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_ADDR) != RESET) && \ - (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_ADDRI) != RESET)) - { - I2C_ITAddrCplt(hi2c, ITFlags); - } - else - { - /* Nothing to do */ - } - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_OK; -} - -/** - * @brief Master sends target device address followed by internal memory address for write request. - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @param DevAddress Target device address: The device 7 bits address value - * in datasheet must be shifted to the left before calling the interface - * @param MemAddress Internal memory address - * @param MemAddSize Size of internal memory address - * @param Timeout Timeout duration - * @param Tickstart Tick start value - * @retval HAL status - */ -static HAL_StatusTypeDef I2C_RequestMemoryWrite(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, - uint16_t MemAddress, uint16_t MemAddSize, uint32_t Timeout, - uint32_t Tickstart) -{ - I2C_TransferConfig(hi2c, DevAddress, (uint8_t)MemAddSize, I2C_RELOAD_MODE, I2C_GENERATE_START_WRITE); - - /* Wait until TXIS flag is set */ - if (I2C_WaitOnTXISFlagUntilTimeout(hi2c, Timeout, Tickstart) != HAL_OK) - { - return HAL_ERROR; - } - - /* If Memory address size is 8Bit */ - if (MemAddSize == I2C_MEMADD_SIZE_8BIT) - { - /* Send Memory Address */ - hi2c->Instance->TXDR = I2C_MEM_ADD_LSB(MemAddress); - } - /* If Memory address size is 16Bit */ - else - { - /* Send MSB of Memory Address */ - hi2c->Instance->TXDR = I2C_MEM_ADD_MSB(MemAddress); - - /* Wait until TXIS flag is set */ - if (I2C_WaitOnTXISFlagUntilTimeout(hi2c, Timeout, Tickstart) != HAL_OK) - { - return HAL_ERROR; - } - - /* Send LSB of Memory Address */ - hi2c->Instance->TXDR = I2C_MEM_ADD_LSB(MemAddress); - } - - /* Wait until TCR flag is set */ - if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TCR, RESET, Timeout, Tickstart) != HAL_OK) - { - return HAL_ERROR; - } - - return HAL_OK; -} - -/** - * @brief Master sends target device address followed by internal memory address for read request. - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @param DevAddress Target device address: The device 7 bits address value - * in datasheet must be shifted to the left before calling the interface - * @param MemAddress Internal memory address - * @param MemAddSize Size of internal memory address - * @param Timeout Timeout duration - * @param Tickstart Tick start value - * @retval HAL status - */ -static HAL_StatusTypeDef I2C_RequestMemoryRead(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, - uint16_t MemAddress, uint16_t MemAddSize, uint32_t Timeout, - uint32_t Tickstart) -{ - I2C_TransferConfig(hi2c, DevAddress, (uint8_t)MemAddSize, I2C_SOFTEND_MODE, I2C_GENERATE_START_WRITE); - - /* Wait until TXIS flag is set */ - if (I2C_WaitOnTXISFlagUntilTimeout(hi2c, Timeout, Tickstart) != HAL_OK) - { - return HAL_ERROR; - } - - /* If Memory address size is 8Bit */ - if (MemAddSize == I2C_MEMADD_SIZE_8BIT) - { - /* Send Memory Address */ - hi2c->Instance->TXDR = I2C_MEM_ADD_LSB(MemAddress); - } - /* If Memory address size is 16Bit */ - else - { - /* Send MSB of Memory Address */ - hi2c->Instance->TXDR = I2C_MEM_ADD_MSB(MemAddress); - - /* Wait until TXIS flag is set */ - if (I2C_WaitOnTXISFlagUntilTimeout(hi2c, Timeout, Tickstart) != HAL_OK) - { - return HAL_ERROR; - } - - /* Send LSB of Memory Address */ - hi2c->Instance->TXDR = I2C_MEM_ADD_LSB(MemAddress); - } - - /* Wait until TC flag is set */ - if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TC, RESET, Timeout, Tickstart) != HAL_OK) - { - return HAL_ERROR; - } - - return HAL_OK; -} - -/** - * @brief I2C Address complete process callback. - * @param hi2c I2C handle. - * @param ITFlags Interrupt flags to handle. - * @retval None - */ -static void I2C_ITAddrCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags) -{ - uint8_t transferdirection; - uint16_t slaveaddrcode; - uint16_t ownadd1code; - uint16_t ownadd2code; - - /* Prevent unused argument(s) compilation warning */ - UNUSED(ITFlags); - - /* In case of Listen state, need to inform upper layer of address match code event */ - if (((uint32_t)hi2c->State & (uint32_t)HAL_I2C_STATE_LISTEN) == (uint32_t)HAL_I2C_STATE_LISTEN) - { - transferdirection = I2C_GET_DIR(hi2c); - slaveaddrcode = I2C_GET_ADDR_MATCH(hi2c); - ownadd1code = I2C_GET_OWN_ADDRESS1(hi2c); - ownadd2code = I2C_GET_OWN_ADDRESS2(hi2c); - - /* If 10bits addressing mode is selected */ - if (hi2c->Init.AddressingMode == I2C_ADDRESSINGMODE_10BIT) - { - if ((slaveaddrcode & SLAVE_ADDR_MSK) == ((ownadd1code >> SLAVE_ADDR_SHIFT) & SLAVE_ADDR_MSK)) - { - slaveaddrcode = ownadd1code; - hi2c->AddrEventCount++; - if (hi2c->AddrEventCount == 2U) - { - /* Reset Address Event counter */ - hi2c->AddrEventCount = 0U; - - /* Clear ADDR flag */ - __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR); - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - /* Call Slave Addr callback */ -#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) - hi2c->AddrCallback(hi2c, transferdirection, slaveaddrcode); -#else - HAL_I2C_AddrCallback(hi2c, transferdirection, slaveaddrcode); -#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ - } - } - else - { - slaveaddrcode = ownadd2code; - - /* Disable ADDR Interrupts */ - I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT); - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - /* Call Slave Addr callback */ -#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) - hi2c->AddrCallback(hi2c, transferdirection, slaveaddrcode); -#else - HAL_I2C_AddrCallback(hi2c, transferdirection, slaveaddrcode); -#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ - } - } - /* else 7 bits addressing mode is selected */ - else - { - /* Disable ADDR Interrupts */ - I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT); - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - /* Call Slave Addr callback */ -#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) - hi2c->AddrCallback(hi2c, transferdirection, slaveaddrcode); -#else - HAL_I2C_AddrCallback(hi2c, transferdirection, slaveaddrcode); -#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ - } - } - /* Else clear address flag only */ - else - { - /* Clear ADDR flag */ - __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR); - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - } -} - -/** - * @brief I2C Master sequential complete process. - * @param hi2c I2C handle. - * @retval None - */ -static void I2C_ITMasterSeqCplt(I2C_HandleTypeDef *hi2c) -{ - /* Reset I2C handle mode */ - hi2c->Mode = HAL_I2C_MODE_NONE; - - /* No Generate Stop, to permit restart mode */ - /* The stop will be done at the end of transfer, when I2C_AUTOEND_MODE enable */ - if (hi2c->State == HAL_I2C_STATE_BUSY_TX) - { - hi2c->State = HAL_I2C_STATE_READY; - hi2c->PreviousState = I2C_STATE_MASTER_BUSY_TX; - hi2c->XferISR = NULL; - - /* Disable Interrupts */ - I2C_Disable_IRQ(hi2c, I2C_XFER_TX_IT); - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - /* Call the corresponding callback to inform upper layer of End of Transfer */ -#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) - hi2c->MasterTxCpltCallback(hi2c); -#else - HAL_I2C_MasterTxCpltCallback(hi2c); -#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ - } - /* hi2c->State == HAL_I2C_STATE_BUSY_RX */ - else - { - hi2c->State = HAL_I2C_STATE_READY; - hi2c->PreviousState = I2C_STATE_MASTER_BUSY_RX; - hi2c->XferISR = NULL; - - /* Disable Interrupts */ - I2C_Disable_IRQ(hi2c, I2C_XFER_RX_IT); - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - /* Call the corresponding callback to inform upper layer of End of Transfer */ -#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) - hi2c->MasterRxCpltCallback(hi2c); -#else - HAL_I2C_MasterRxCpltCallback(hi2c); -#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ - } -} - -/** - * @brief I2C Slave sequential complete process. - * @param hi2c I2C handle. - * @retval None - */ -static void I2C_ITSlaveSeqCplt(I2C_HandleTypeDef *hi2c) -{ - uint32_t tmpcr1value = READ_REG(hi2c->Instance->CR1); - - /* Reset I2C handle mode */ - hi2c->Mode = HAL_I2C_MODE_NONE; - - /* If a DMA is ongoing, Update handle size context */ - if (I2C_CHECK_IT_SOURCE(tmpcr1value, I2C_CR1_TXDMAEN) != RESET) - { - /* Disable DMA Request */ - hi2c->Instance->CR1 &= ~I2C_CR1_TXDMAEN; - } - else if (I2C_CHECK_IT_SOURCE(tmpcr1value, I2C_CR1_RXDMAEN) != RESET) - { - /* Disable DMA Request */ - hi2c->Instance->CR1 &= ~I2C_CR1_RXDMAEN; - } - else - { - /* Do nothing */ - } - - if (hi2c->State == HAL_I2C_STATE_BUSY_TX_LISTEN) - { - /* Remove HAL_I2C_STATE_SLAVE_BUSY_TX, keep only HAL_I2C_STATE_LISTEN */ - hi2c->State = HAL_I2C_STATE_LISTEN; - hi2c->PreviousState = I2C_STATE_SLAVE_BUSY_TX; - - /* Disable Interrupts */ - I2C_Disable_IRQ(hi2c, I2C_XFER_TX_IT); - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - /* Call the corresponding callback to inform upper layer of End of Transfer */ -#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) - hi2c->SlaveTxCpltCallback(hi2c); -#else - HAL_I2C_SlaveTxCpltCallback(hi2c); -#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ - } - - else if (hi2c->State == HAL_I2C_STATE_BUSY_RX_LISTEN) - { - /* Remove HAL_I2C_STATE_SLAVE_BUSY_RX, keep only HAL_I2C_STATE_LISTEN */ - hi2c->State = HAL_I2C_STATE_LISTEN; - hi2c->PreviousState = I2C_STATE_SLAVE_BUSY_RX; - - /* Disable Interrupts */ - I2C_Disable_IRQ(hi2c, I2C_XFER_RX_IT); - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - /* Call the corresponding callback to inform upper layer of End of Transfer */ -#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) - hi2c->SlaveRxCpltCallback(hi2c); -#else - HAL_I2C_SlaveRxCpltCallback(hi2c); -#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ - } - else - { - /* Nothing to do */ - } -} - -/** - * @brief I2C Master complete process. - * @param hi2c I2C handle. - * @param ITFlags Interrupt flags to handle. - * @retval None - */ -static void I2C_ITMasterCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags) -{ - uint32_t tmperror; - uint32_t tmpITFlags = ITFlags; - __IO uint32_t tmpreg; - - /* Clear STOP Flag */ - __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); - - /* Disable Interrupts and Store Previous state */ - if (hi2c->State == HAL_I2C_STATE_BUSY_TX) - { - I2C_Disable_IRQ(hi2c, I2C_XFER_TX_IT); - hi2c->PreviousState = I2C_STATE_MASTER_BUSY_TX; - } - else if (hi2c->State == HAL_I2C_STATE_BUSY_RX) - { - I2C_Disable_IRQ(hi2c, I2C_XFER_RX_IT); - hi2c->PreviousState = I2C_STATE_MASTER_BUSY_RX; - } - else - { - /* Do nothing */ - } - - /* Clear Configuration Register 2 */ - I2C_RESET_CR2(hi2c); - - /* Reset handle parameters */ - hi2c->XferISR = NULL; - hi2c->XferOptions = I2C_NO_OPTION_FRAME; - - if (I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_AF) != RESET) - { - /* Clear NACK Flag */ - __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); - - /* Set acknowledge error code */ - hi2c->ErrorCode |= HAL_I2C_ERROR_AF; - } - - /* Fetch Last receive data if any */ - if ((hi2c->State == HAL_I2C_STATE_ABORT) && (I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_RXNE) != RESET)) - { - /* Read data from RXDR */ - tmpreg = (uint8_t)hi2c->Instance->RXDR; - UNUSED(tmpreg); - } - - /* Flush TX register */ - I2C_Flush_TXDR(hi2c); - - /* Store current volatile hi2c->ErrorCode, misra rule */ - tmperror = hi2c->ErrorCode; - - /* Call the corresponding callback to inform upper layer of End of Transfer */ - if ((hi2c->State == HAL_I2C_STATE_ABORT) || (tmperror != HAL_I2C_ERROR_NONE)) - { - /* Call the corresponding callback to inform upper layer of End of Transfer */ - I2C_ITError(hi2c, hi2c->ErrorCode); - } - /* hi2c->State == HAL_I2C_STATE_BUSY_TX */ - else if (hi2c->State == HAL_I2C_STATE_BUSY_TX) - { - hi2c->State = HAL_I2C_STATE_READY; - hi2c->PreviousState = I2C_STATE_NONE; - - if (hi2c->Mode == HAL_I2C_MODE_MEM) - { - hi2c->Mode = HAL_I2C_MODE_NONE; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - /* Call the corresponding callback to inform upper layer of End of Transfer */ -#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) - hi2c->MemTxCpltCallback(hi2c); -#else - HAL_I2C_MemTxCpltCallback(hi2c); -#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ - } - else - { - hi2c->Mode = HAL_I2C_MODE_NONE; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - /* Call the corresponding callback to inform upper layer of End of Transfer */ -#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) - hi2c->MasterTxCpltCallback(hi2c); -#else - HAL_I2C_MasterTxCpltCallback(hi2c); -#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ - } - } - /* hi2c->State == HAL_I2C_STATE_BUSY_RX */ - else if (hi2c->State == HAL_I2C_STATE_BUSY_RX) - { - hi2c->State = HAL_I2C_STATE_READY; - hi2c->PreviousState = I2C_STATE_NONE; - - if (hi2c->Mode == HAL_I2C_MODE_MEM) - { - hi2c->Mode = HAL_I2C_MODE_NONE; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - /* Call the corresponding callback to inform upper layer of End of Transfer */ -#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) - hi2c->MemRxCpltCallback(hi2c); -#else - HAL_I2C_MemRxCpltCallback(hi2c); -#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ - } - else - { - hi2c->Mode = HAL_I2C_MODE_NONE; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - /* Call the corresponding callback to inform upper layer of End of Transfer */ -#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) - hi2c->MasterRxCpltCallback(hi2c); -#else - HAL_I2C_MasterRxCpltCallback(hi2c); -#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ - } - } - else - { - /* Nothing to do */ - } -} - -/** - * @brief I2C Slave complete process. - * @param hi2c I2C handle. - * @param ITFlags Interrupt flags to handle. - * @retval None - */ -static void I2C_ITSlaveCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags) -{ - uint32_t tmpcr1value = READ_REG(hi2c->Instance->CR1); - uint32_t tmpITFlags = ITFlags; - HAL_I2C_StateTypeDef tmpstate = hi2c->State; - - /* Clear STOP Flag */ - __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); - - /* Disable Interrupts and Store Previous state */ - if ((tmpstate == HAL_I2C_STATE_BUSY_TX) || (tmpstate == HAL_I2C_STATE_BUSY_TX_LISTEN)) - { - I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT | I2C_XFER_TX_IT); - hi2c->PreviousState = I2C_STATE_SLAVE_BUSY_TX; - } - else if ((tmpstate == HAL_I2C_STATE_BUSY_RX) || (tmpstate == HAL_I2C_STATE_BUSY_RX_LISTEN)) - { - I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT | I2C_XFER_RX_IT); - hi2c->PreviousState = I2C_STATE_SLAVE_BUSY_RX; - } - else - { - /* Do nothing */ - } - - /* Disable Address Acknowledge */ - hi2c->Instance->CR2 |= I2C_CR2_NACK; - - /* Clear Configuration Register 2 */ - I2C_RESET_CR2(hi2c); - - /* Flush TX register */ - I2C_Flush_TXDR(hi2c); - - /* If a DMA is ongoing, Update handle size context */ - if (I2C_CHECK_IT_SOURCE(tmpcr1value, I2C_CR1_TXDMAEN) != RESET) - { - /* Disable DMA Request */ - hi2c->Instance->CR1 &= ~I2C_CR1_TXDMAEN; - - if (hi2c->hdmatx != NULL) - { - hi2c->XferCount = (uint16_t)I2C_GET_DMA_REMAIN_DATA(hi2c->hdmatx); - } - } - else if (I2C_CHECK_IT_SOURCE(tmpcr1value, I2C_CR1_RXDMAEN) != RESET) - { - /* Disable DMA Request */ - hi2c->Instance->CR1 &= ~I2C_CR1_RXDMAEN; - - if (hi2c->hdmarx != NULL) - { - hi2c->XferCount = (uint16_t)I2C_GET_DMA_REMAIN_DATA(hi2c->hdmarx); - } - } - else - { - /* Do nothing */ - } - - /* Store Last receive data if any */ - if (I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_RXNE) != RESET) - { - /* Remove RXNE flag on temporary variable as read done */ - tmpITFlags &= ~I2C_FLAG_RXNE; - - /* Read data from RXDR */ - *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->RXDR; - - /* Increment Buffer pointer */ - hi2c->pBuffPtr++; - - if ((hi2c->XferSize > 0U)) - { - hi2c->XferSize--; - hi2c->XferCount--; - } - } - - /* All data are not transferred, so set error code accordingly */ - if (hi2c->XferCount != 0U) - { - /* Set ErrorCode corresponding to a Non-Acknowledge */ - hi2c->ErrorCode |= HAL_I2C_ERROR_AF; - } - - hi2c->Mode = HAL_I2C_MODE_NONE; - hi2c->XferISR = NULL; - - if (hi2c->ErrorCode != HAL_I2C_ERROR_NONE) - { - /* Call the corresponding callback to inform upper layer of End of Transfer */ - I2C_ITError(hi2c, hi2c->ErrorCode); - - /* Call the Listen Complete callback, to inform upper layer of the end of Listen usecase */ - if (hi2c->State == HAL_I2C_STATE_LISTEN) - { - /* Call I2C Listen complete process */ - I2C_ITListenCplt(hi2c, tmpITFlags); - } - } - else if (hi2c->XferOptions != I2C_NO_OPTION_FRAME) - { - /* Call the Sequential Complete callback, to inform upper layer of the end of Transfer */ - I2C_ITSlaveSeqCplt(hi2c); - - hi2c->XferOptions = I2C_NO_OPTION_FRAME; - hi2c->State = HAL_I2C_STATE_READY; - hi2c->PreviousState = I2C_STATE_NONE; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - /* Call the Listen Complete callback, to inform upper layer of the end of Listen usecase */ -#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) - hi2c->ListenCpltCallback(hi2c); -#else - HAL_I2C_ListenCpltCallback(hi2c); -#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ - } - /* Call the corresponding callback to inform upper layer of End of Transfer */ - else if (hi2c->State == HAL_I2C_STATE_BUSY_RX) - { - hi2c->State = HAL_I2C_STATE_READY; - hi2c->PreviousState = I2C_STATE_NONE; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - /* Call the corresponding callback to inform upper layer of End of Transfer */ -#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) - hi2c->SlaveRxCpltCallback(hi2c); -#else - HAL_I2C_SlaveRxCpltCallback(hi2c); -#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ - } - else - { - hi2c->State = HAL_I2C_STATE_READY; - hi2c->PreviousState = I2C_STATE_NONE; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - /* Call the corresponding callback to inform upper layer of End of Transfer */ -#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) - hi2c->SlaveTxCpltCallback(hi2c); -#else - HAL_I2C_SlaveTxCpltCallback(hi2c); -#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ - } -} - -/** - * @brief I2C Listen complete process. - * @param hi2c I2C handle. - * @param ITFlags Interrupt flags to handle. - * @retval None - */ -static void I2C_ITListenCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags) -{ - /* Reset handle parameters */ - hi2c->XferOptions = I2C_NO_OPTION_FRAME; - hi2c->PreviousState = I2C_STATE_NONE; - hi2c->State = HAL_I2C_STATE_READY; - hi2c->Mode = HAL_I2C_MODE_NONE; - hi2c->XferISR = NULL; - - /* Store Last receive data if any */ - if (I2C_CHECK_FLAG(ITFlags, I2C_FLAG_RXNE) != RESET) - { - /* Read data from RXDR */ - *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->RXDR; - - /* Increment Buffer pointer */ - hi2c->pBuffPtr++; - - if ((hi2c->XferSize > 0U)) - { - hi2c->XferSize--; - hi2c->XferCount--; - - /* Set ErrorCode corresponding to a Non-Acknowledge */ - hi2c->ErrorCode |= HAL_I2C_ERROR_AF; - } - } - - /* Disable all Interrupts*/ - I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT | I2C_XFER_RX_IT | I2C_XFER_TX_IT); - - /* Clear NACK Flag */ - __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - /* Call the Listen Complete callback, to inform upper layer of the end of Listen usecase */ -#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) - hi2c->ListenCpltCallback(hi2c); -#else - HAL_I2C_ListenCpltCallback(hi2c); -#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ -} - -/** - * @brief I2C interrupts error process. - * @param hi2c I2C handle. - * @param ErrorCode Error code to handle. - * @retval None - */ -static void I2C_ITError(I2C_HandleTypeDef *hi2c, uint32_t ErrorCode) -{ - HAL_I2C_StateTypeDef tmpstate = hi2c->State; - uint32_t tmppreviousstate; - - /* Reset handle parameters */ - hi2c->Mode = HAL_I2C_MODE_NONE; - hi2c->XferOptions = I2C_NO_OPTION_FRAME; - hi2c->XferCount = 0U; - - /* Set new error code */ - hi2c->ErrorCode |= ErrorCode; - - /* Disable Interrupts */ - if ((tmpstate == HAL_I2C_STATE_LISTEN) || - (tmpstate == HAL_I2C_STATE_BUSY_TX_LISTEN) || - (tmpstate == HAL_I2C_STATE_BUSY_RX_LISTEN)) - { - /* Disable all interrupts, except interrupts related to LISTEN state */ - I2C_Disable_IRQ(hi2c, I2C_XFER_RX_IT | I2C_XFER_TX_IT); - - /* keep HAL_I2C_STATE_LISTEN if set */ - hi2c->State = HAL_I2C_STATE_LISTEN; - hi2c->XferISR = I2C_Slave_ISR_IT; - } - else - { - /* Disable all interrupts */ - I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT | I2C_XFER_RX_IT | I2C_XFER_TX_IT); - - /* If state is an abort treatment on going, don't change state */ - /* This change will be do later */ - if (hi2c->State != HAL_I2C_STATE_ABORT) - { - /* Set HAL_I2C_STATE_READY */ - hi2c->State = HAL_I2C_STATE_READY; - } - hi2c->XferISR = NULL; - } - - /* Abort DMA TX transfer if any */ - tmppreviousstate = hi2c->PreviousState; - if ((hi2c->hdmatx != NULL) && ((tmppreviousstate == I2C_STATE_MASTER_BUSY_TX) || \ - (tmppreviousstate == I2C_STATE_SLAVE_BUSY_TX))) - { - if ((hi2c->Instance->CR1 & I2C_CR1_TXDMAEN) == I2C_CR1_TXDMAEN) - { - hi2c->Instance->CR1 &= ~I2C_CR1_TXDMAEN; - } - - if (HAL_DMA_GetState(hi2c->hdmatx) != HAL_DMA_STATE_READY) - { - /* Set the I2C DMA Abort callback : - will lead to call HAL_I2C_ErrorCallback() at end of DMA abort procedure */ - hi2c->hdmatx->XferAbortCallback = I2C_DMAAbort; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - /* Abort DMA TX */ - if (HAL_DMA_Abort_IT(hi2c->hdmatx) != HAL_OK) - { - /* Call Directly XferAbortCallback function in case of error */ - hi2c->hdmatx->XferAbortCallback(hi2c->hdmatx); - } - } - else - { - I2C_TreatErrorCallback(hi2c); - } - } - /* Abort DMA RX transfer if any */ - else if ((hi2c->hdmarx != NULL) && ((tmppreviousstate == I2C_STATE_MASTER_BUSY_RX) || \ - (tmppreviousstate == I2C_STATE_SLAVE_BUSY_RX))) - { - if ((hi2c->Instance->CR1 & I2C_CR1_RXDMAEN) == I2C_CR1_RXDMAEN) - { - hi2c->Instance->CR1 &= ~I2C_CR1_RXDMAEN; - } - - if (HAL_DMA_GetState(hi2c->hdmarx) != HAL_DMA_STATE_READY) - { - /* Set the I2C DMA Abort callback : - will lead to call HAL_I2C_ErrorCallback() at end of DMA abort procedure */ - hi2c->hdmarx->XferAbortCallback = I2C_DMAAbort; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - /* Abort DMA RX */ - if (HAL_DMA_Abort_IT(hi2c->hdmarx) != HAL_OK) - { - /* Call Directly hi2c->hdmarx->XferAbortCallback function in case of error */ - hi2c->hdmarx->XferAbortCallback(hi2c->hdmarx); - } - } - else - { - I2C_TreatErrorCallback(hi2c); - } - } - else - { - I2C_TreatErrorCallback(hi2c); - } -} - -/** - * @brief I2C Error callback treatment. - * @param hi2c I2C handle. - * @retval None - */ -static void I2C_TreatErrorCallback(I2C_HandleTypeDef *hi2c) -{ - if (hi2c->State == HAL_I2C_STATE_ABORT) - { - hi2c->State = HAL_I2C_STATE_READY; - hi2c->PreviousState = I2C_STATE_NONE; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - /* Call the corresponding callback to inform upper layer of End of Transfer */ -#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) - hi2c->AbortCpltCallback(hi2c); -#else - HAL_I2C_AbortCpltCallback(hi2c); -#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ - } - else - { - hi2c->PreviousState = I2C_STATE_NONE; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - /* Call the corresponding callback to inform upper layer of End of Transfer */ -#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) - hi2c->ErrorCallback(hi2c); -#else - HAL_I2C_ErrorCallback(hi2c); -#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ - } -} - -/** - * @brief I2C Tx data register flush process. - * @param hi2c I2C handle. - * @retval None - */ -static void I2C_Flush_TXDR(I2C_HandleTypeDef *hi2c) -{ - /* If a pending TXIS flag is set */ - /* Write a dummy data in TXDR to clear it */ - if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_TXIS) != RESET) - { - hi2c->Instance->TXDR = 0x00U; - } - - /* Flush TX register if not empty */ - if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_TXE) == RESET) - { - __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_TXE); - } -} - -/** - * @brief DMA I2C master transmit process complete callback. - * @param hdma DMA handle - * @retval None - */ -static void I2C_DMAMasterTransmitCplt(DMA_HandleTypeDef *hdma) -{ - /* Derogation MISRAC2012-Rule-11.5 */ - I2C_HandleTypeDef *hi2c = (I2C_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); - - /* Disable DMA Request */ - hi2c->Instance->CR1 &= ~I2C_CR1_TXDMAEN; - - /* If last transfer, enable STOP interrupt */ - if (hi2c->XferCount == 0U) - { - /* Enable STOP interrupt */ - I2C_Enable_IRQ(hi2c, I2C_XFER_CPLT_IT); - } - /* else prepare a new DMA transfer and enable TCReload interrupt */ - else - { - /* Update Buffer pointer */ - hi2c->pBuffPtr += hi2c->XferSize; - - /* Set the XferSize to transfer */ - if (hi2c->XferCount > MAX_NBYTE_SIZE) - { - hi2c->XferSize = MAX_NBYTE_SIZE; - } - else - { - hi2c->XferSize = hi2c->XferCount; - } - - /* Enable the DMA channel */ - if (HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)hi2c->pBuffPtr, (uint32_t)&hi2c->Instance->TXDR, - hi2c->XferSize) != HAL_OK) - { - /* Call the corresponding callback to inform upper layer of End of Transfer */ - I2C_ITError(hi2c, HAL_I2C_ERROR_DMA); - } - else - { - /* Enable TC interrupts */ - I2C_Enable_IRQ(hi2c, I2C_XFER_RELOAD_IT); - } - } -} - -/** - * @brief DMA I2C slave transmit process complete callback. - * @param hdma DMA handle - * @retval None - */ -static void I2C_DMASlaveTransmitCplt(DMA_HandleTypeDef *hdma) -{ - /* Derogation MISRAC2012-Rule-11.5 */ - I2C_HandleTypeDef *hi2c = (I2C_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); - uint32_t tmpoptions = hi2c->XferOptions; - - if ((tmpoptions == I2C_NEXT_FRAME) || (tmpoptions == I2C_FIRST_FRAME)) - { - /* Disable DMA Request */ - hi2c->Instance->CR1 &= ~I2C_CR1_TXDMAEN; - - /* Last Byte is Transmitted */ - /* Call I2C Slave Sequential complete process */ - I2C_ITSlaveSeqCplt(hi2c); - } - else - { - /* No specific action, Master fully manage the generation of STOP condition */ - /* Mean that this generation can arrive at any time, at the end or during DMA process */ - /* So STOP condition should be manage through Interrupt treatment */ - } -} - -/** - * @brief DMA I2C master receive process complete callback. - * @param hdma DMA handle - * @retval None - */ -static void I2C_DMAMasterReceiveCplt(DMA_HandleTypeDef *hdma) -{ - /* Derogation MISRAC2012-Rule-11.5 */ - I2C_HandleTypeDef *hi2c = (I2C_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); - - /* Disable DMA Request */ - hi2c->Instance->CR1 &= ~I2C_CR1_RXDMAEN; - - /* If last transfer, enable STOP interrupt */ - if (hi2c->XferCount == 0U) - { - /* Enable STOP interrupt */ - I2C_Enable_IRQ(hi2c, I2C_XFER_CPLT_IT); - } - /* else prepare a new DMA transfer and enable TCReload interrupt */ - else - { - /* Update Buffer pointer */ - hi2c->pBuffPtr += hi2c->XferSize; - - /* Set the XferSize to transfer */ - if (hi2c->XferCount > MAX_NBYTE_SIZE) - { - hi2c->XferSize = MAX_NBYTE_SIZE; - } - else - { - hi2c->XferSize = hi2c->XferCount; - } - - /* Enable the DMA channel */ - if (HAL_DMA_Start_IT(hi2c->hdmarx, (uint32_t)&hi2c->Instance->RXDR, (uint32_t)hi2c->pBuffPtr, - hi2c->XferSize) != HAL_OK) - { - /* Call the corresponding callback to inform upper layer of End of Transfer */ - I2C_ITError(hi2c, HAL_I2C_ERROR_DMA); - } - else - { - /* Enable TC interrupts */ - I2C_Enable_IRQ(hi2c, I2C_XFER_RELOAD_IT); - } - } -} - -/** - * @brief DMA I2C slave receive process complete callback. - * @param hdma DMA handle - * @retval None - */ -static void I2C_DMASlaveReceiveCplt(DMA_HandleTypeDef *hdma) -{ - /* Derogation MISRAC2012-Rule-11.5 */ - I2C_HandleTypeDef *hi2c = (I2C_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); - uint32_t tmpoptions = hi2c->XferOptions; - - if ((I2C_GET_DMA_REMAIN_DATA(hi2c->hdmarx) == 0U) && \ - (tmpoptions != I2C_NO_OPTION_FRAME)) - { - /* Disable DMA Request */ - hi2c->Instance->CR1 &= ~I2C_CR1_RXDMAEN; - - /* Call I2C Slave Sequential complete process */ - I2C_ITSlaveSeqCplt(hi2c); - } - else - { - /* No specific action, Master fully manage the generation of STOP condition */ - /* Mean that this generation can arrive at any time, at the end or during DMA process */ - /* So STOP condition should be manage through Interrupt treatment */ - } -} - -/** - * @brief DMA I2C communication error callback. - * @param hdma DMA handle - * @retval None - */ -static void I2C_DMAError(DMA_HandleTypeDef *hdma) -{ - /* Derogation MISRAC2012-Rule-11.5 */ - I2C_HandleTypeDef *hi2c = (I2C_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); - - /* Disable Acknowledge */ - hi2c->Instance->CR2 |= I2C_CR2_NACK; - - /* Call the corresponding callback to inform upper layer of End of Transfer */ - I2C_ITError(hi2c, HAL_I2C_ERROR_DMA); -} - -/** - * @brief DMA I2C communication abort callback - * (To be called at end of DMA Abort procedure). - * @param hdma DMA handle. - * @retval None - */ -static void I2C_DMAAbort(DMA_HandleTypeDef *hdma) -{ - /* Derogation MISRAC2012-Rule-11.5 */ - I2C_HandleTypeDef *hi2c = (I2C_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); - - /* Reset AbortCpltCallback */ - if (hi2c->hdmatx != NULL) - { - hi2c->hdmatx->XferAbortCallback = NULL; - } - if (hi2c->hdmarx != NULL) - { - hi2c->hdmarx->XferAbortCallback = NULL; - } - - I2C_TreatErrorCallback(hi2c); -} - -/** - * @brief This function handles I2C Communication Timeout. It waits - * until a flag is no longer in the specified status. - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @param Flag Specifies the I2C flag to check. - * @param Status The actual Flag status (SET or RESET). - * @param Timeout Timeout duration - * @param Tickstart Tick start value - * @retval HAL status - */ -static HAL_StatusTypeDef I2C_WaitOnFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Flag, FlagStatus Status, - uint32_t Timeout, uint32_t Tickstart) -{ - while (__HAL_I2C_GET_FLAG(hi2c, Flag) == Status) - { - /* Check for the Timeout */ - if (Timeout != HAL_MAX_DELAY) - { - if (((HAL_GetTick() - Tickstart) > Timeout) || (Timeout == 0U)) - { - hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT; - hi2c->State = HAL_I2C_STATE_READY; - hi2c->Mode = HAL_I2C_MODE_NONE; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - return HAL_ERROR; - } - } - } - return HAL_OK; -} - -/** - * @brief This function handles I2C Communication Timeout for specific usage of TXIS flag. - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @param Timeout Timeout duration - * @param Tickstart Tick start value - * @retval HAL status - */ -static HAL_StatusTypeDef I2C_WaitOnTXISFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout, - uint32_t Tickstart) -{ - while (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_TXIS) == RESET) - { - /* Check if an error is detected */ - if (I2C_IsErrorOccurred(hi2c, Timeout, Tickstart) != HAL_OK) - { - return HAL_ERROR; - } - - /* Check for the Timeout */ - if (Timeout != HAL_MAX_DELAY) - { - if (((HAL_GetTick() - Tickstart) > Timeout) || (Timeout == 0U)) - { - hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT; - hi2c->State = HAL_I2C_STATE_READY; - hi2c->Mode = HAL_I2C_MODE_NONE; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_ERROR; - } - } - } - return HAL_OK; -} - -/** - * @brief This function handles I2C Communication Timeout for specific usage of STOP flag. - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @param Timeout Timeout duration - * @param Tickstart Tick start value - * @retval HAL status - */ -static HAL_StatusTypeDef I2C_WaitOnSTOPFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout, - uint32_t Tickstart) -{ - while (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_STOPF) == RESET) - { - /* Check if an error is detected */ - if (I2C_IsErrorOccurred(hi2c, Timeout, Tickstart) != HAL_OK) - { - return HAL_ERROR; - } - - /* Check for the Timeout */ - if (((HAL_GetTick() - Tickstart) > Timeout) || (Timeout == 0U)) - { - hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT; - hi2c->State = HAL_I2C_STATE_READY; - hi2c->Mode = HAL_I2C_MODE_NONE; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_ERROR; - } - } - return HAL_OK; -} - -/** - * @brief This function handles I2C Communication Timeout for specific usage of RXNE flag. - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @param Timeout Timeout duration - * @param Tickstart Tick start value - * @retval HAL status - */ -static HAL_StatusTypeDef I2C_WaitOnRXNEFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout, - uint32_t Tickstart) -{ - while (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_RXNE) == RESET) - { - /* Check if an error is detected */ - if (I2C_IsErrorOccurred(hi2c, Timeout, Tickstart) != HAL_OK) - { - return HAL_ERROR; - } - - /* Check if a STOPF is detected */ - if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_STOPF) == SET) - { - /* Check if an RXNE is pending */ - /* Store Last receive data if any */ - if ((__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_RXNE) == SET) && (hi2c->XferSize > 0U)) - { - /* Return HAL_OK */ - /* The Reading of data from RXDR will be done in caller function */ - return HAL_OK; - } - else - { - if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_AF) == SET) - { - __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); - hi2c->ErrorCode = HAL_I2C_ERROR_AF; - } - else - { - hi2c->ErrorCode = HAL_I2C_ERROR_NONE; - } - - /* Clear STOP Flag */ - __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); - - /* Clear Configuration Register 2 */ - I2C_RESET_CR2(hi2c); - - hi2c->State = HAL_I2C_STATE_READY; - hi2c->Mode = HAL_I2C_MODE_NONE; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_ERROR; - } - } - - /* Check for the Timeout */ - if (((HAL_GetTick() - Tickstart) > Timeout) || (Timeout == 0U)) - { - hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT; - hi2c->State = HAL_I2C_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_ERROR; - } - } - return HAL_OK; -} - -/** - * @brief This function handles errors detection during an I2C Communication. - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @param Timeout Timeout duration - * @param Tickstart Tick start value - * @retval HAL status - */ -static HAL_StatusTypeDef I2C_IsErrorOccurred(I2C_HandleTypeDef *hi2c, uint32_t Timeout, uint32_t Tickstart) -{ - HAL_StatusTypeDef status = HAL_OK; - uint32_t itflag = hi2c->Instance->ISR; - uint32_t error_code = 0; - uint32_t tickstart = Tickstart; - uint32_t tmp1; - HAL_I2C_ModeTypeDef tmp2; - - if (HAL_IS_BIT_SET(itflag, I2C_FLAG_AF)) - { - /* Clear NACKF Flag */ - __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); - - /* Wait until STOP Flag is set or timeout occurred */ - /* AutoEnd should be initiate after AF */ - while ((__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_STOPF) == RESET) && (status == HAL_OK)) - { - /* Check for the Timeout */ - if (Timeout != HAL_MAX_DELAY) - { - if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U)) - { - tmp1 = (uint32_t)(hi2c->Instance->CR2 & I2C_CR2_STOP); - tmp2 = hi2c->Mode; - - /* In case of I2C still busy, try to regenerate a STOP manually */ - if ((__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) != RESET) && \ - (tmp1 != I2C_CR2_STOP) && \ - (tmp2 != HAL_I2C_MODE_SLAVE)) - { - /* Generate Stop */ - hi2c->Instance->CR2 |= I2C_CR2_STOP; - - /* Update Tick with new reference */ - tickstart = HAL_GetTick(); - } - - while (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_STOPF) == RESET) - { - /* Check for the Timeout */ - if ((HAL_GetTick() - tickstart) > I2C_TIMEOUT_STOPF) - { - hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT; - hi2c->State = HAL_I2C_STATE_READY; - hi2c->Mode = HAL_I2C_MODE_NONE; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - status = HAL_ERROR; - } - } - } - } - } - - /* In case STOP Flag is detected, clear it */ - if (status == HAL_OK) - { - /* Clear STOP Flag */ - __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); - } - - error_code |= HAL_I2C_ERROR_AF; - - status = HAL_ERROR; - } - - /* Refresh Content of Status register */ - itflag = hi2c->Instance->ISR; - - /* Then verify if an additional errors occurs */ - /* Check if a Bus error occurred */ - if (HAL_IS_BIT_SET(itflag, I2C_FLAG_BERR)) - { - error_code |= HAL_I2C_ERROR_BERR; - - /* Clear BERR flag */ - __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_BERR); - - status = HAL_ERROR; - } - - /* Check if an Over-Run/Under-Run error occurred */ - if (HAL_IS_BIT_SET(itflag, I2C_FLAG_OVR)) - { - error_code |= HAL_I2C_ERROR_OVR; - - /* Clear OVR flag */ - __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_OVR); - - status = HAL_ERROR; - } - - /* Check if an Arbitration Loss error occurred */ - if (HAL_IS_BIT_SET(itflag, I2C_FLAG_ARLO)) - { - error_code |= HAL_I2C_ERROR_ARLO; - - /* Clear ARLO flag */ - __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ARLO); - - status = HAL_ERROR; - } - - if (status != HAL_OK) - { - /* Flush TX register */ - I2C_Flush_TXDR(hi2c); - - /* Clear Configuration Register 2 */ - I2C_RESET_CR2(hi2c); - - hi2c->ErrorCode |= error_code; - hi2c->State = HAL_I2C_STATE_READY; - hi2c->Mode = HAL_I2C_MODE_NONE; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - } - - return status; -} - -/** - * @brief Handles I2Cx communication when starting transfer or during transfer (TC or TCR flag are set). - * @param hi2c I2C handle. - * @param DevAddress Specifies the slave address to be programmed. - * @param Size Specifies the number of bytes to be programmed. - * This parameter must be a value between 0 and 255. - * @param Mode New state of the I2C START condition generation. - * This parameter can be one of the following values: - * @arg @ref I2C_RELOAD_MODE Enable Reload mode . - * @arg @ref I2C_AUTOEND_MODE Enable Automatic end mode. - * @arg @ref I2C_SOFTEND_MODE Enable Software end mode. - * @param Request New state of the I2C START condition generation. - * This parameter can be one of the following values: - * @arg @ref I2C_NO_STARTSTOP Don't Generate stop and start condition. - * @arg @ref I2C_GENERATE_STOP Generate stop condition (Size should be set to 0). - * @arg @ref I2C_GENERATE_START_READ Generate Restart for read request. - * @arg @ref I2C_GENERATE_START_WRITE Generate Restart for write request. - * @retval None - */ -static void I2C_TransferConfig(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t Size, uint32_t Mode, - uint32_t Request) -{ - /* Check the parameters */ - assert_param(IS_I2C_ALL_INSTANCE(hi2c->Instance)); - assert_param(IS_TRANSFER_MODE(Mode)); - assert_param(IS_TRANSFER_REQUEST(Request)); - - /* Declaration of tmp to prevent undefined behavior of volatile usage */ - uint32_t tmp = ((uint32_t)(((uint32_t)DevAddress & I2C_CR2_SADD) | \ - (((uint32_t)Size << I2C_CR2_NBYTES_Pos) & I2C_CR2_NBYTES) | \ - (uint32_t)Mode | (uint32_t)Request) & (~0x80000000U)); - - /* update CR2 register */ - MODIFY_REG(hi2c->Instance->CR2, \ - ((I2C_CR2_SADD | I2C_CR2_NBYTES | I2C_CR2_RELOAD | I2C_CR2_AUTOEND | \ - (I2C_CR2_RD_WRN & (uint32_t)(Request >> (31U - I2C_CR2_RD_WRN_Pos))) | \ - I2C_CR2_START | I2C_CR2_STOP)), tmp); -} - -/** - * @brief Manage the enabling of Interrupts. - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @param InterruptRequest Value of @ref I2C_Interrupt_configuration_definition. - * @retval None - */ -static void I2C_Enable_IRQ(I2C_HandleTypeDef *hi2c, uint16_t InterruptRequest) -{ - uint32_t tmpisr = 0U; - - if ((hi2c->XferISR == I2C_Master_ISR_DMA) || \ - (hi2c->XferISR == I2C_Slave_ISR_DMA)) - { - if ((InterruptRequest & I2C_XFER_LISTEN_IT) == I2C_XFER_LISTEN_IT) - { - /* Enable ERR, STOP, NACK and ADDR interrupts */ - tmpisr |= I2C_IT_ADDRI | I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_ERRI; - } - - if (InterruptRequest == I2C_XFER_ERROR_IT) - { - /* Enable ERR and NACK interrupts */ - tmpisr |= I2C_IT_ERRI | I2C_IT_NACKI; - } - - if (InterruptRequest == I2C_XFER_CPLT_IT) - { - /* Enable STOP interrupts */ - tmpisr |= (I2C_IT_STOPI | I2C_IT_TCI); - } - - if (InterruptRequest == I2C_XFER_RELOAD_IT) - { - /* Enable TC interrupts */ - tmpisr |= I2C_IT_TCI; - } - } - else - { - if ((InterruptRequest & I2C_XFER_LISTEN_IT) == I2C_XFER_LISTEN_IT) - { - /* Enable ERR, STOP, NACK, and ADDR interrupts */ - tmpisr |= I2C_IT_ADDRI | I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_ERRI; - } - - if ((InterruptRequest & I2C_XFER_TX_IT) == I2C_XFER_TX_IT) - { - /* Enable ERR, TC, STOP, NACK and RXI interrupts */ - tmpisr |= I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_TXI; - } - - if ((InterruptRequest & I2C_XFER_RX_IT) == I2C_XFER_RX_IT) - { - /* Enable ERR, TC, STOP, NACK and TXI interrupts */ - tmpisr |= I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_RXI; - } - - if (InterruptRequest == I2C_XFER_ERROR_IT) - { - /* Enable ERR and NACK interrupts */ - tmpisr |= I2C_IT_ERRI | I2C_IT_NACKI; - } - - if (InterruptRequest == I2C_XFER_CPLT_IT) - { - /* Enable STOP interrupts */ - tmpisr |= I2C_IT_STOPI; - } - } - - /* Enable interrupts only at the end */ - /* to avoid the risk of I2C interrupt handle execution before */ - /* all interrupts requested done */ - __HAL_I2C_ENABLE_IT(hi2c, tmpisr); -} - -/** - * @brief Manage the disabling of Interrupts. - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @param InterruptRequest Value of @ref I2C_Interrupt_configuration_definition. - * @retval None - */ -static void I2C_Disable_IRQ(I2C_HandleTypeDef *hi2c, uint16_t InterruptRequest) -{ - uint32_t tmpisr = 0U; - - if ((InterruptRequest & I2C_XFER_TX_IT) == I2C_XFER_TX_IT) - { - /* Disable TC and TXI interrupts */ - tmpisr |= I2C_IT_TCI | I2C_IT_TXI; - - if (((uint32_t)hi2c->State & (uint32_t)HAL_I2C_STATE_LISTEN) != (uint32_t)HAL_I2C_STATE_LISTEN) - { - /* Disable NACK and STOP interrupts */ - tmpisr |= I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_ERRI; - } - } - - if ((InterruptRequest & I2C_XFER_RX_IT) == I2C_XFER_RX_IT) - { - /* Disable TC and RXI interrupts */ - tmpisr |= I2C_IT_TCI | I2C_IT_RXI; - - if (((uint32_t)hi2c->State & (uint32_t)HAL_I2C_STATE_LISTEN) != (uint32_t)HAL_I2C_STATE_LISTEN) - { - /* Disable NACK and STOP interrupts */ - tmpisr |= I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_ERRI; - } - } - - if ((InterruptRequest & I2C_XFER_LISTEN_IT) == I2C_XFER_LISTEN_IT) - { - /* Disable ADDR, NACK and STOP interrupts */ - tmpisr |= I2C_IT_ADDRI | I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_ERRI; - } - - if (InterruptRequest == I2C_XFER_ERROR_IT) - { - /* Enable ERR and NACK interrupts */ - tmpisr |= I2C_IT_ERRI | I2C_IT_NACKI; - } - - if (InterruptRequest == I2C_XFER_CPLT_IT) - { - /* Enable STOP interrupts */ - tmpisr |= I2C_IT_STOPI; - } - - if (InterruptRequest == I2C_XFER_RELOAD_IT) - { - /* Enable TC interrupts */ - tmpisr |= I2C_IT_TCI; - } - - /* Disable interrupts only at the end */ - /* to avoid a breaking situation like at "t" time */ - /* all disable interrupts request are not done */ - __HAL_I2C_DISABLE_IT(hi2c, tmpisr); -} - -/** - * @brief Convert I2Cx OTHER_xxx XferOptions to functional XferOptions. - * @param hi2c I2C handle. - * @retval None - */ -static void I2C_ConvertOtherXferOptions(I2C_HandleTypeDef *hi2c) -{ - /* if user set XferOptions to I2C_OTHER_FRAME */ - /* it request implicitly to generate a restart condition */ - /* set XferOptions to I2C_FIRST_FRAME */ - if (hi2c->XferOptions == I2C_OTHER_FRAME) - { - hi2c->XferOptions = I2C_FIRST_FRAME; - } - /* else if user set XferOptions to I2C_OTHER_AND_LAST_FRAME */ - /* it request implicitly to generate a restart condition */ - /* then generate a stop condition at the end of transfer */ - /* set XferOptions to I2C_FIRST_AND_LAST_FRAME */ - else if (hi2c->XferOptions == I2C_OTHER_AND_LAST_FRAME) - { - hi2c->XferOptions = I2C_FIRST_AND_LAST_FRAME; - } - else - { - /* Nothing to do */ - } -} - -/** - * @} - */ - -#endif /* HAL_I2C_MODULE_ENABLED */ -/** - * @} - */ - -/** - * @} - */ +/** + ****************************************************************************** + * @file stm32l4xx_hal_i2c.c + * @author MCD Application Team + * @brief I2C HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Inter Integrated Circuit (I2C) peripheral: + * + Initialization and de-initialization functions + * + IO operation functions + * + Peripheral State and Errors functions + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + The I2C HAL driver can be used as follows: + + (#) Declare a I2C_HandleTypeDef handle structure, for example: + I2C_HandleTypeDef hi2c; + + (#)Initialize the I2C low level resources by implementing the HAL_I2C_MspInit() API: + (##) Enable the I2Cx interface clock + (##) I2C pins configuration + (+++) Enable the clock for the I2C GPIOs + (+++) Configure I2C pins as alternate function open-drain + (##) NVIC configuration if you need to use interrupt process + (+++) Configure the I2Cx interrupt priority + (+++) Enable the NVIC I2C IRQ Channel + (##) DMA Configuration if you need to use DMA process + (+++) Declare a DMA_HandleTypeDef handle structure for + the transmit or receive channel + (+++) Enable the DMAx interface clock using + (+++) Configure the DMA handle parameters + (+++) Configure the DMA Tx or Rx channel + (+++) Associate the initialized DMA handle to the hi2c DMA Tx or Rx handle + (+++) Configure the priority and enable the NVIC for the transfer complete interrupt on + the DMA Tx or Rx channel + + (#) Configure the Communication Clock Timing, Own Address1, Master Addressing mode, Dual Addressing mode, + Own Address2, Own Address2 Mask, General call and Nostretch mode in the hi2c Init structure. + + (#) Initialize the I2C registers by calling the HAL_I2C_Init(), configures also the low level Hardware + (GPIO, CLOCK, NVIC...etc) by calling the customized HAL_I2C_MspInit(&hi2c) API. + + (#) To check if target device is ready for communication, use the function HAL_I2C_IsDeviceReady() + + (#) For I2C IO and IO MEM operations, three operation modes are available within this driver : + + *** Polling mode IO operation *** + ================================= + [..] + (+) Transmit in master mode an amount of data in blocking mode using HAL_I2C_Master_Transmit() + (+) Receive in master mode an amount of data in blocking mode using HAL_I2C_Master_Receive() + (+) Transmit in slave mode an amount of data in blocking mode using HAL_I2C_Slave_Transmit() + (+) Receive in slave mode an amount of data in blocking mode using HAL_I2C_Slave_Receive() + + *** Polling mode IO MEM operation *** + ===================================== + [..] + (+) Write an amount of data in blocking mode to a specific memory address using HAL_I2C_Mem_Write() + (+) Read an amount of data in blocking mode from a specific memory address using HAL_I2C_Mem_Read() + + + *** Interrupt mode IO operation *** + =================================== + [..] + (+) Transmit in master mode an amount of data in non-blocking mode using HAL_I2C_Master_Transmit_IT() + (+) At transmission end of transfer, HAL_I2C_MasterTxCpltCallback() is executed and users can + add their own code by customization of function pointer HAL_I2C_MasterTxCpltCallback() + (+) Receive in master mode an amount of data in non-blocking mode using HAL_I2C_Master_Receive_IT() + (+) At reception end of transfer, HAL_I2C_MasterRxCpltCallback() is executed and users can + add their own code by customization of function pointer HAL_I2C_MasterRxCpltCallback() + (+) Transmit in slave mode an amount of data in non-blocking mode using HAL_I2C_Slave_Transmit_IT() + (+) At transmission end of transfer, HAL_I2C_SlaveTxCpltCallback() is executed and users can + add their own code by customization of function pointer HAL_I2C_SlaveTxCpltCallback() + (+) Receive in slave mode an amount of data in non-blocking mode using HAL_I2C_Slave_Receive_IT() + (+) At reception end of transfer, HAL_I2C_SlaveRxCpltCallback() is executed and users can + add their own code by customization of function pointer HAL_I2C_SlaveRxCpltCallback() + (+) In case of transfer Error, HAL_I2C_ErrorCallback() function is executed and users can + add their own code by customization of function pointer HAL_I2C_ErrorCallback() + (+) Abort a master or memory I2C process communication with Interrupt using HAL_I2C_Master_Abort_IT() + (+) End of abort process, HAL_I2C_AbortCpltCallback() is executed and users can + add their own code by customization of function pointer HAL_I2C_AbortCpltCallback() + (+) Discard a slave I2C process communication using __HAL_I2C_GENERATE_NACK() macro. + This action will inform Master to generate a Stop condition to discard the communication. + + + *** Interrupt mode or DMA mode IO sequential operation *** + ========================================================== + [..] + (@) These interfaces allow to manage a sequential transfer with a repeated start condition + when a direction change during transfer + [..] + (+) A specific option field manage the different steps of a sequential transfer + (+) Option field values are defined through I2C_XFEROPTIONS and are listed below: + (++) I2C_FIRST_AND_LAST_FRAME: No sequential usage, functional is same as associated interfaces in + no sequential mode + (++) I2C_FIRST_FRAME: Sequential usage, this option allow to manage a sequence with start condition, address + and data to transfer without a final stop condition + (++) I2C_FIRST_AND_NEXT_FRAME: Sequential usage (Master only), this option allow to manage a sequence with + start condition, address and data to transfer without a final stop condition, + an then permit a call the same master sequential interface several times + (like HAL_I2C_Master_Seq_Transmit_IT() then HAL_I2C_Master_Seq_Transmit_IT() + or HAL_I2C_Master_Seq_Transmit_DMA() then HAL_I2C_Master_Seq_Transmit_DMA()) + (++) I2C_NEXT_FRAME: Sequential usage, this option allow to manage a sequence with a restart condition, address + and with new data to transfer if the direction change or manage only the new data to + transfer + if no direction change and without a final stop condition in both cases + (++) I2C_LAST_FRAME: Sequential usage, this option allow to manage a sequance with a restart condition, address + and with new data to transfer if the direction change or manage only the new data to + transfer + if no direction change and with a final stop condition in both cases + (++) I2C_LAST_FRAME_NO_STOP: Sequential usage (Master only), this option allow to manage a restart condition + after several call of the same master sequential interface several times + (link with option I2C_FIRST_AND_NEXT_FRAME). + Usage can, transfer several bytes one by one using + HAL_I2C_Master_Seq_Transmit_IT + or HAL_I2C_Master_Seq_Receive_IT + or HAL_I2C_Master_Seq_Transmit_DMA + or HAL_I2C_Master_Seq_Receive_DMA + with option I2C_FIRST_AND_NEXT_FRAME then I2C_NEXT_FRAME. + Then usage of this option I2C_LAST_FRAME_NO_STOP at the last Transmit or + Receive sequence permit to call the opposite interface Receive or Transmit + without stopping the communication and so generate a restart condition. + (++) I2C_OTHER_FRAME: Sequential usage (Master only), this option allow to manage a restart condition after + each call of the same master sequential + interface. + Usage can, transfer several bytes one by one with a restart with slave address between + each bytes using + HAL_I2C_Master_Seq_Transmit_IT + or HAL_I2C_Master_Seq_Receive_IT + or HAL_I2C_Master_Seq_Transmit_DMA + or HAL_I2C_Master_Seq_Receive_DMA + with option I2C_FIRST_FRAME then I2C_OTHER_FRAME. + Then usage of this option I2C_OTHER_AND_LAST_FRAME at the last frame to help automatic + generation of STOP condition. + + (+) Different sequential I2C interfaces are listed below: + (++) Sequential transmit in master I2C mode an amount of data in non-blocking mode using + HAL_I2C_Master_Seq_Transmit_IT() or using HAL_I2C_Master_Seq_Transmit_DMA() + (+++) At transmission end of current frame transfer, HAL_I2C_MasterTxCpltCallback() is executed and + users can add their own code by customization of function pointer HAL_I2C_MasterTxCpltCallback() + (++) Sequential receive in master I2C mode an amount of data in non-blocking mode using + HAL_I2C_Master_Seq_Receive_IT() or using HAL_I2C_Master_Seq_Receive_DMA() + (+++) At reception end of current frame transfer, HAL_I2C_MasterRxCpltCallback() is executed and users can + add their own code by customization of function pointer HAL_I2C_MasterRxCpltCallback() + (++) Abort a master or memory IT or DMA I2C process communication with Interrupt using HAL_I2C_Master_Abort_IT() + (+++) End of abort process, HAL_I2C_AbortCpltCallback() is executed and users can + add their own code by customization of function pointer HAL_I2C_AbortCpltCallback() + (++) Enable/disable the Address listen mode in slave I2C mode using HAL_I2C_EnableListen_IT() + HAL_I2C_DisableListen_IT() + (+++) When address slave I2C match, HAL_I2C_AddrCallback() is executed and users can + add their own code to check the Address Match Code and the transmission direction request by master + (Write/Read). + (+++) At Listen mode end HAL_I2C_ListenCpltCallback() is executed and users can + add their own code by customization of function pointer HAL_I2C_ListenCpltCallback() + (++) Sequential transmit in slave I2C mode an amount of data in non-blocking mode using + HAL_I2C_Slave_Seq_Transmit_IT() or using HAL_I2C_Slave_Seq_Transmit_DMA() + (+++) At transmission end of current frame transfer, HAL_I2C_SlaveTxCpltCallback() is executed and + users can add their own code by customization of function pointer HAL_I2C_SlaveTxCpltCallback() + (++) Sequential receive in slave I2C mode an amount of data in non-blocking mode using + HAL_I2C_Slave_Seq_Receive_IT() or using HAL_I2C_Slave_Seq_Receive_DMA() + (+++) At reception end of current frame transfer, HAL_I2C_SlaveRxCpltCallback() is executed and users can + add their own code by customization of function pointer HAL_I2C_SlaveRxCpltCallback() + (++) In case of transfer Error, HAL_I2C_ErrorCallback() function is executed and users can + add their own code by customization of function pointer HAL_I2C_ErrorCallback() + (++) Discard a slave I2C process communication using __HAL_I2C_GENERATE_NACK() macro. + This action will inform Master to generate a Stop condition to discard the communication. + + *** Interrupt mode IO MEM operation *** + ======================================= + [..] + (+) Write an amount of data in non-blocking mode with Interrupt to a specific memory address using + HAL_I2C_Mem_Write_IT() + (+) At Memory end of write transfer, HAL_I2C_MemTxCpltCallback() is executed and users can + add their own code by customization of function pointer HAL_I2C_MemTxCpltCallback() + (+) Read an amount of data in non-blocking mode with Interrupt from a specific memory address using + HAL_I2C_Mem_Read_IT() + (+) At Memory end of read transfer, HAL_I2C_MemRxCpltCallback() is executed and users can + add their own code by customization of function pointer HAL_I2C_MemRxCpltCallback() + (+) In case of transfer Error, HAL_I2C_ErrorCallback() function is executed and users can + add their own code by customization of function pointer HAL_I2C_ErrorCallback() + + *** DMA mode IO operation *** + ============================== + [..] + (+) Transmit in master mode an amount of data in non-blocking mode (DMA) using + HAL_I2C_Master_Transmit_DMA() + (+) At transmission end of transfer, HAL_I2C_MasterTxCpltCallback() is executed and users can + add their own code by customization of function pointer HAL_I2C_MasterTxCpltCallback() + (+) Receive in master mode an amount of data in non-blocking mode (DMA) using + HAL_I2C_Master_Receive_DMA() + (+) At reception end of transfer, HAL_I2C_MasterRxCpltCallback() is executed and users can + add their own code by customization of function pointer HAL_I2C_MasterRxCpltCallback() + (+) Transmit in slave mode an amount of data in non-blocking mode (DMA) using + HAL_I2C_Slave_Transmit_DMA() + (+) At transmission end of transfer, HAL_I2C_SlaveTxCpltCallback() is executed and users can + add their own code by customization of function pointer HAL_I2C_SlaveTxCpltCallback() + (+) Receive in slave mode an amount of data in non-blocking mode (DMA) using + HAL_I2C_Slave_Receive_DMA() + (+) At reception end of transfer, HAL_I2C_SlaveRxCpltCallback() is executed and users can + add their own code by customization of function pointer HAL_I2C_SlaveRxCpltCallback() + (+) In case of transfer Error, HAL_I2C_ErrorCallback() function is executed and users can + add their own code by customization of function pointer HAL_I2C_ErrorCallback() + (+) Abort a master or memory I2C process communication with Interrupt using HAL_I2C_Master_Abort_IT() + (+) End of abort process, HAL_I2C_AbortCpltCallback() is executed and users can + add their own code by customization of function pointer HAL_I2C_AbortCpltCallback() + (+) Discard a slave I2C process communication using __HAL_I2C_GENERATE_NACK() macro. + This action will inform Master to generate a Stop condition to discard the communication. + + *** DMA mode IO MEM operation *** + ================================= + [..] + (+) Write an amount of data in non-blocking mode with DMA to a specific memory address using + HAL_I2C_Mem_Write_DMA() + (+) At Memory end of write transfer, HAL_I2C_MemTxCpltCallback() is executed and users can + add their own code by customization of function pointer HAL_I2C_MemTxCpltCallback() + (+) Read an amount of data in non-blocking mode with DMA from a specific memory address using + HAL_I2C_Mem_Read_DMA() + (+) At Memory end of read transfer, HAL_I2C_MemRxCpltCallback() is executed and users can + add their own code by customization of function pointer HAL_I2C_MemRxCpltCallback() + (+) In case of transfer Error, HAL_I2C_ErrorCallback() function is executed and users can + add their own code by customization of function pointer HAL_I2C_ErrorCallback() + + + *** I2C HAL driver macros list *** + ================================== + [..] + Below the list of most used macros in I2C HAL driver. + + (+) __HAL_I2C_ENABLE: Enable the I2C peripheral + (+) __HAL_I2C_DISABLE: Disable the I2C peripheral + (+) __HAL_I2C_GENERATE_NACK: Generate a Non-Acknowledge I2C peripheral in Slave mode + (+) __HAL_I2C_GET_FLAG: Check whether the specified I2C flag is set or not + (+) __HAL_I2C_CLEAR_FLAG: Clear the specified I2C pending flag + (+) __HAL_I2C_ENABLE_IT: Enable the specified I2C interrupt + (+) __HAL_I2C_DISABLE_IT: Disable the specified I2C interrupt + + *** Callback registration *** + ============================================= + [..] + The compilation flag USE_HAL_I2C_REGISTER_CALLBACKS when set to 1 + allows the user to configure dynamically the driver callbacks. + Use Functions HAL_I2C_RegisterCallback() or HAL_I2C_RegisterAddrCallback() + to register an interrupt callback. + [..] + Function HAL_I2C_RegisterCallback() allows to register following callbacks: + (+) MasterTxCpltCallback : callback for Master transmission end of transfer. + (+) MasterRxCpltCallback : callback for Master reception end of transfer. + (+) SlaveTxCpltCallback : callback for Slave transmission end of transfer. + (+) SlaveRxCpltCallback : callback for Slave reception end of transfer. + (+) ListenCpltCallback : callback for end of listen mode. + (+) MemTxCpltCallback : callback for Memory transmission end of transfer. + (+) MemRxCpltCallback : callback for Memory reception end of transfer. + (+) ErrorCallback : callback for error detection. + (+) AbortCpltCallback : callback for abort completion process. + (+) MspInitCallback : callback for Msp Init. + (+) MspDeInitCallback : callback for Msp DeInit. + This function takes as parameters the HAL peripheral handle, the Callback ID + and a pointer to the user callback function. + [..] + For specific callback AddrCallback use dedicated register callbacks : HAL_I2C_RegisterAddrCallback(). + [..] + Use function HAL_I2C_UnRegisterCallback to reset a callback to the default + weak function. + HAL_I2C_UnRegisterCallback takes as parameters the HAL peripheral handle, + and the Callback ID. + This function allows to reset following callbacks: + (+) MasterTxCpltCallback : callback for Master transmission end of transfer. + (+) MasterRxCpltCallback : callback for Master reception end of transfer. + (+) SlaveTxCpltCallback : callback for Slave transmission end of transfer. + (+) SlaveRxCpltCallback : callback for Slave reception end of transfer. + (+) ListenCpltCallback : callback for end of listen mode. + (+) MemTxCpltCallback : callback for Memory transmission end of transfer. + (+) MemRxCpltCallback : callback for Memory reception end of transfer. + (+) ErrorCallback : callback for error detection. + (+) AbortCpltCallback : callback for abort completion process. + (+) MspInitCallback : callback for Msp Init. + (+) MspDeInitCallback : callback for Msp DeInit. + [..] + For callback AddrCallback use dedicated register callbacks : HAL_I2C_UnRegisterAddrCallback(). + [..] + By default, after the HAL_I2C_Init() and when the state is HAL_I2C_STATE_RESET + all callbacks are set to the corresponding weak functions: + examples HAL_I2C_MasterTxCpltCallback(), HAL_I2C_MasterRxCpltCallback(). + Exception done for MspInit and MspDeInit functions that are + reset to the legacy weak functions in the HAL_I2C_Init()/ HAL_I2C_DeInit() only when + these callbacks are null (not registered beforehand). + If MspInit or MspDeInit are not null, the HAL_I2C_Init()/ HAL_I2C_DeInit() + keep and use the user MspInit/MspDeInit callbacks (registered beforehand) whatever the state. + [..] + Callbacks can be registered/unregistered in HAL_I2C_STATE_READY state only. + Exception done MspInit/MspDeInit functions that can be registered/unregistered + in HAL_I2C_STATE_READY or HAL_I2C_STATE_RESET state, + thus registered (user) MspInit/DeInit callbacks can be used during the Init/DeInit. + Then, the user first registers the MspInit/MspDeInit user callbacks + using HAL_I2C_RegisterCallback() before calling HAL_I2C_DeInit() + or HAL_I2C_Init() function. + [..] + When the compilation flag USE_HAL_I2C_REGISTER_CALLBACKS is set to 0 or + not defined, the callback registration feature is not available and all callbacks + are set to the corresponding weak functions. + + [..] + (@) You can refer to the I2C HAL driver header file for more useful macros + + @endverbatim + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l4xx_hal.h" + +/** @addtogroup STM32L4xx_HAL_Driver + * @{ + */ + +/** @defgroup I2C I2C + * @brief I2C HAL module driver + * @{ + */ + +#ifdef HAL_I2C_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ + +/** @defgroup I2C_Private_Define I2C Private Define + * @{ + */ +#define TIMING_CLEAR_MASK (0xF0FFFFFFU) /*!< I2C TIMING clear register Mask */ +#define I2C_TIMEOUT_ADDR (10000U) /*!< 10 s */ +#define I2C_TIMEOUT_BUSY (25U) /*!< 25 ms */ +#define I2C_TIMEOUT_DIR (25U) /*!< 25 ms */ +#define I2C_TIMEOUT_RXNE (25U) /*!< 25 ms */ +#define I2C_TIMEOUT_STOPF (25U) /*!< 25 ms */ +#define I2C_TIMEOUT_TC (25U) /*!< 25 ms */ +#define I2C_TIMEOUT_TCR (25U) /*!< 25 ms */ +#define I2C_TIMEOUT_TXIS (25U) /*!< 25 ms */ +#define I2C_TIMEOUT_FLAG (25U) /*!< 25 ms */ + +#define MAX_NBYTE_SIZE 255U +#define SLAVE_ADDR_SHIFT 7U +#define SLAVE_ADDR_MSK 0x06U + +/* Private define for @ref PreviousState usage */ +#define I2C_STATE_MSK ((uint32_t)((uint32_t)((uint32_t)HAL_I2C_STATE_BUSY_TX | \ + (uint32_t)HAL_I2C_STATE_BUSY_RX) & \ + (uint32_t)(~((uint32_t)HAL_I2C_STATE_READY)))) +/*!< Mask State define, keep only RX and TX bits */ +#define I2C_STATE_NONE ((uint32_t)(HAL_I2C_MODE_NONE)) +/*!< Default Value */ +#define I2C_STATE_MASTER_BUSY_TX ((uint32_t)(((uint32_t)HAL_I2C_STATE_BUSY_TX & I2C_STATE_MSK) | \ + (uint32_t)HAL_I2C_MODE_MASTER)) +/*!< Master Busy TX, combinaison of State LSB and Mode enum */ +#define I2C_STATE_MASTER_BUSY_RX ((uint32_t)(((uint32_t)HAL_I2C_STATE_BUSY_RX & I2C_STATE_MSK) | \ + (uint32_t)HAL_I2C_MODE_MASTER)) +/*!< Master Busy RX, combinaison of State LSB and Mode enum */ +#define I2C_STATE_SLAVE_BUSY_TX ((uint32_t)(((uint32_t)HAL_I2C_STATE_BUSY_TX & I2C_STATE_MSK) | \ + (uint32_t)HAL_I2C_MODE_SLAVE)) +/*!< Slave Busy TX, combinaison of State LSB and Mode enum */ +#define I2C_STATE_SLAVE_BUSY_RX ((uint32_t)(((uint32_t)HAL_I2C_STATE_BUSY_RX & I2C_STATE_MSK) | \ + (uint32_t)HAL_I2C_MODE_SLAVE)) +/*!< Slave Busy RX, combinaison of State LSB and Mode enum */ +#define I2C_STATE_MEM_BUSY_TX ((uint32_t)(((uint32_t)HAL_I2C_STATE_BUSY_TX & I2C_STATE_MSK) | \ + (uint32_t)HAL_I2C_MODE_MEM)) +/*!< Memory Busy TX, combinaison of State LSB and Mode enum */ +#define I2C_STATE_MEM_BUSY_RX ((uint32_t)(((uint32_t)HAL_I2C_STATE_BUSY_RX & I2C_STATE_MSK) | \ + (uint32_t)HAL_I2C_MODE_MEM)) +/*!< Memory Busy RX, combinaison of State LSB and Mode enum */ + + +/* Private define to centralize the enable/disable of Interrupts */ +#define I2C_XFER_TX_IT (uint16_t)(0x0001U) /*!< Bit field can be combinated with + @ref I2C_XFER_LISTEN_IT */ +#define I2C_XFER_RX_IT (uint16_t)(0x0002U) /*!< Bit field can be combinated with + @ref I2C_XFER_LISTEN_IT */ +#define I2C_XFER_LISTEN_IT (uint16_t)(0x8000U) /*!< Bit field can be combinated with @ref I2C_XFER_TX_IT + and @ref I2C_XFER_RX_IT */ + +#define I2C_XFER_ERROR_IT (uint16_t)(0x0010U) /*!< Bit definition to manage addition of global Error + and NACK treatment */ +#define I2C_XFER_CPLT_IT (uint16_t)(0x0020U) /*!< Bit definition to manage only STOP evenement */ +#define I2C_XFER_RELOAD_IT (uint16_t)(0x0040U) /*!< Bit definition to manage only Reload of NBYTE */ + +/* Private define Sequential Transfer Options default/reset value */ +#define I2C_NO_OPTION_FRAME (0xFFFF0000U) +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @addtogroup I2C_Private_Macro + * @{ + */ +/* Macro to get remaining data to transfer on DMA side */ +#define I2C_GET_DMA_REMAIN_DATA(__HANDLE__) __HAL_DMA_GET_COUNTER(__HANDLE__) +/** + * @} + */ + +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ + +/** @defgroup I2C_Private_Functions I2C Private Functions + * @{ + */ +/* Private functions to handle DMA transfer */ +static void I2C_DMAMasterTransmitCplt(DMA_HandleTypeDef *hdma); +static void I2C_DMAMasterReceiveCplt(DMA_HandleTypeDef *hdma); +static void I2C_DMASlaveTransmitCplt(DMA_HandleTypeDef *hdma); +static void I2C_DMASlaveReceiveCplt(DMA_HandleTypeDef *hdma); +static void I2C_DMAError(DMA_HandleTypeDef *hdma); +static void I2C_DMAAbort(DMA_HandleTypeDef *hdma); + + +/* Private functions to handle IT transfer */ +static void I2C_ITAddrCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags); +static void I2C_ITMasterSeqCplt(I2C_HandleTypeDef *hi2c); +static void I2C_ITSlaveSeqCplt(I2C_HandleTypeDef *hi2c); +static void I2C_ITMasterCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags); +static void I2C_ITSlaveCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags); +static void I2C_ITListenCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags); +static void I2C_ITError(I2C_HandleTypeDef *hi2c, uint32_t ErrorCode); + +/* Private functions to handle IT transfer */ +static HAL_StatusTypeDef I2C_RequestMemoryWrite(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, + uint16_t MemAddress, uint16_t MemAddSize, uint32_t Timeout, + uint32_t Tickstart); +static HAL_StatusTypeDef I2C_RequestMemoryRead(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, + uint16_t MemAddress, uint16_t MemAddSize, uint32_t Timeout, + uint32_t Tickstart); + +/* Private functions for I2C transfer IRQ handler */ +static HAL_StatusTypeDef I2C_Master_ISR_IT(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, + uint32_t ITSources); +static HAL_StatusTypeDef I2C_Mem_ISR_IT(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, + uint32_t ITSources); +static HAL_StatusTypeDef I2C_Slave_ISR_IT(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, + uint32_t ITSources); +static HAL_StatusTypeDef I2C_Master_ISR_DMA(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, + uint32_t ITSources); +static HAL_StatusTypeDef I2C_Mem_ISR_DMA(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, + uint32_t ITSources); +static HAL_StatusTypeDef I2C_Slave_ISR_DMA(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, + uint32_t ITSources); + +/* Private functions to handle flags during polling transfer */ +static HAL_StatusTypeDef I2C_WaitOnFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Flag, FlagStatus Status, + uint32_t Timeout, uint32_t Tickstart); +static HAL_StatusTypeDef I2C_WaitOnTXISFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout, + uint32_t Tickstart); +static HAL_StatusTypeDef I2C_WaitOnRXNEFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout, + uint32_t Tickstart); +static HAL_StatusTypeDef I2C_WaitOnSTOPFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout, + uint32_t Tickstart); +static HAL_StatusTypeDef I2C_IsErrorOccurred(I2C_HandleTypeDef *hi2c, uint32_t Timeout, + uint32_t Tickstart); + +/* Private functions to centralize the enable/disable of Interrupts */ +static void I2C_Enable_IRQ(I2C_HandleTypeDef *hi2c, uint16_t InterruptRequest); +static void I2C_Disable_IRQ(I2C_HandleTypeDef *hi2c, uint16_t InterruptRequest); + +/* Private function to treat different error callback */ +static void I2C_TreatErrorCallback(I2C_HandleTypeDef *hi2c); + +/* Private function to flush TXDR register */ +static void I2C_Flush_TXDR(I2C_HandleTypeDef *hi2c); + +/* Private function to handle start, restart or stop a transfer */ +static void I2C_TransferConfig(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t Size, uint32_t Mode, + uint32_t Request); + +/* Private function to Convert Specific options */ +static void I2C_ConvertOtherXferOptions(I2C_HandleTypeDef *hi2c); +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup I2C_Exported_Functions I2C Exported Functions + * @{ + */ + +/** @defgroup I2C_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and Configuration functions + * +@verbatim + =============================================================================== + ##### Initialization and de-initialization functions ##### + =============================================================================== + [..] This subsection provides a set of functions allowing to initialize and + deinitialize the I2Cx peripheral: + + (+) User must Implement HAL_I2C_MspInit() function in which he configures + all related peripherals resources (CLOCK, GPIO, DMA, IT and NVIC ). + + (+) Call the function HAL_I2C_Init() to configure the selected device with + the selected configuration: + (++) Clock Timing + (++) Own Address 1 + (++) Addressing mode (Master, Slave) + (++) Dual Addressing mode + (++) Own Address 2 + (++) Own Address 2 Mask + (++) General call mode + (++) Nostretch mode + + (+) Call the function HAL_I2C_DeInit() to restore the default configuration + of the selected I2Cx peripheral. + +@endverbatim + * @{ + */ + +/** + * @brief Initializes the I2C according to the specified parameters + * in the I2C_InitTypeDef and initialize the associated handle. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Init(I2C_HandleTypeDef *hi2c) +{ + /* Check the I2C handle allocation */ + if (hi2c == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_I2C_ALL_INSTANCE(hi2c->Instance)); + assert_param(IS_I2C_OWN_ADDRESS1(hi2c->Init.OwnAddress1)); + assert_param(IS_I2C_ADDRESSING_MODE(hi2c->Init.AddressingMode)); + assert_param(IS_I2C_DUAL_ADDRESS(hi2c->Init.DualAddressMode)); + assert_param(IS_I2C_OWN_ADDRESS2(hi2c->Init.OwnAddress2)); + assert_param(IS_I2C_OWN_ADDRESS2_MASK(hi2c->Init.OwnAddress2Masks)); + assert_param(IS_I2C_GENERAL_CALL(hi2c->Init.GeneralCallMode)); + assert_param(IS_I2C_NO_STRETCH(hi2c->Init.NoStretchMode)); + + if (hi2c->State == HAL_I2C_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + hi2c->Lock = HAL_UNLOCKED; + +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + /* Init the I2C Callback settings */ + hi2c->MasterTxCpltCallback = HAL_I2C_MasterTxCpltCallback; /* Legacy weak MasterTxCpltCallback */ + hi2c->MasterRxCpltCallback = HAL_I2C_MasterRxCpltCallback; /* Legacy weak MasterRxCpltCallback */ + hi2c->SlaveTxCpltCallback = HAL_I2C_SlaveTxCpltCallback; /* Legacy weak SlaveTxCpltCallback */ + hi2c->SlaveRxCpltCallback = HAL_I2C_SlaveRxCpltCallback; /* Legacy weak SlaveRxCpltCallback */ + hi2c->ListenCpltCallback = HAL_I2C_ListenCpltCallback; /* Legacy weak ListenCpltCallback */ + hi2c->MemTxCpltCallback = HAL_I2C_MemTxCpltCallback; /* Legacy weak MemTxCpltCallback */ + hi2c->MemRxCpltCallback = HAL_I2C_MemRxCpltCallback; /* Legacy weak MemRxCpltCallback */ + hi2c->ErrorCallback = HAL_I2C_ErrorCallback; /* Legacy weak ErrorCallback */ + hi2c->AbortCpltCallback = HAL_I2C_AbortCpltCallback; /* Legacy weak AbortCpltCallback */ + hi2c->AddrCallback = HAL_I2C_AddrCallback; /* Legacy weak AddrCallback */ + + if (hi2c->MspInitCallback == NULL) + { + hi2c->MspInitCallback = HAL_I2C_MspInit; /* Legacy weak MspInit */ + } + + /* Init the low level hardware : GPIO, CLOCK, CORTEX...etc */ + hi2c->MspInitCallback(hi2c); +#else + /* Init the low level hardware : GPIO, CLOCK, CORTEX...etc */ + HAL_I2C_MspInit(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + + hi2c->State = HAL_I2C_STATE_BUSY; + + /* Disable the selected I2C peripheral */ + __HAL_I2C_DISABLE(hi2c); + + /*---------------------------- I2Cx TIMINGR Configuration ------------------*/ + /* Configure I2Cx: Frequency range */ + hi2c->Instance->TIMINGR = hi2c->Init.Timing & TIMING_CLEAR_MASK; + + /*---------------------------- I2Cx OAR1 Configuration ---------------------*/ + /* Disable Own Address1 before set the Own Address1 configuration */ + hi2c->Instance->OAR1 &= ~I2C_OAR1_OA1EN; + + /* Configure I2Cx: Own Address1 and ack own address1 mode */ + if (hi2c->Init.AddressingMode == I2C_ADDRESSINGMODE_7BIT) + { + hi2c->Instance->OAR1 = (I2C_OAR1_OA1EN | hi2c->Init.OwnAddress1); + } + else /* I2C_ADDRESSINGMODE_10BIT */ + { + hi2c->Instance->OAR1 = (I2C_OAR1_OA1EN | I2C_OAR1_OA1MODE | hi2c->Init.OwnAddress1); + } + + /*---------------------------- I2Cx CR2 Configuration ----------------------*/ + /* Configure I2Cx: Addressing Master mode */ + if (hi2c->Init.AddressingMode == I2C_ADDRESSINGMODE_10BIT) + { + SET_BIT(hi2c->Instance->CR2, I2C_CR2_ADD10); + } + else + { + /* Clear the I2C ADD10 bit */ + CLEAR_BIT(hi2c->Instance->CR2, I2C_CR2_ADD10); + } + /* Enable the AUTOEND by default, and enable NACK (should be disable only during Slave process */ + hi2c->Instance->CR2 |= (I2C_CR2_AUTOEND | I2C_CR2_NACK); + + /*---------------------------- I2Cx OAR2 Configuration ---------------------*/ + /* Disable Own Address2 before set the Own Address2 configuration */ + hi2c->Instance->OAR2 &= ~I2C_DUALADDRESS_ENABLE; + + /* Configure I2Cx: Dual mode and Own Address2 */ + hi2c->Instance->OAR2 = (hi2c->Init.DualAddressMode | hi2c->Init.OwnAddress2 | \ + (hi2c->Init.OwnAddress2Masks << 8)); + + /*---------------------------- I2Cx CR1 Configuration ----------------------*/ + /* Configure I2Cx: Generalcall and NoStretch mode */ + hi2c->Instance->CR1 = (hi2c->Init.GeneralCallMode | hi2c->Init.NoStretchMode); + + /* Enable the selected I2C peripheral */ + __HAL_I2C_ENABLE(hi2c); + + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + hi2c->State = HAL_I2C_STATE_READY; + hi2c->PreviousState = I2C_STATE_NONE; + hi2c->Mode = HAL_I2C_MODE_NONE; + + return HAL_OK; +} + +/** + * @brief DeInitialize the I2C peripheral. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_DeInit(I2C_HandleTypeDef *hi2c) +{ + /* Check the I2C handle allocation */ + if (hi2c == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_I2C_ALL_INSTANCE(hi2c->Instance)); + + hi2c->State = HAL_I2C_STATE_BUSY; + + /* Disable the I2C Peripheral Clock */ + __HAL_I2C_DISABLE(hi2c); + +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + if (hi2c->MspDeInitCallback == NULL) + { + hi2c->MspDeInitCallback = HAL_I2C_MspDeInit; /* Legacy weak MspDeInit */ + } + + /* DeInit the low level hardware: GPIO, CLOCK, NVIC */ + hi2c->MspDeInitCallback(hi2c); +#else + /* DeInit the low level hardware: GPIO, CLOCK, NVIC */ + HAL_I2C_MspDeInit(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + hi2c->State = HAL_I2C_STATE_RESET; + hi2c->PreviousState = I2C_STATE_NONE; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Release Lock */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; +} + +/** + * @brief Initialize the I2C MSP. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval None + */ +__weak void HAL_I2C_MspInit(I2C_HandleTypeDef *hi2c) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2c); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_I2C_MspInit could be implemented in the user file + */ +} + +/** + * @brief DeInitialize the I2C MSP. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval None + */ +__weak void HAL_I2C_MspDeInit(I2C_HandleTypeDef *hi2c) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2c); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_I2C_MspDeInit could be implemented in the user file + */ +} + +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) +/** + * @brief Register a User I2C Callback + * To be used instead of the weak predefined callback + * @note The HAL_I2C_RegisterCallback() may be called before HAL_I2C_Init() in HAL_I2C_STATE_RESET + * to register callbacks for HAL_I2C_MSPINIT_CB_ID and HAL_I2C_MSPDEINIT_CB_ID. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param CallbackID ID of the callback to be registered + * This parameter can be one of the following values: + * @arg @ref HAL_I2C_MASTER_TX_COMPLETE_CB_ID Master Tx Transfer completed callback ID + * @arg @ref HAL_I2C_MASTER_RX_COMPLETE_CB_ID Master Rx Transfer completed callback ID + * @arg @ref HAL_I2C_SLAVE_TX_COMPLETE_CB_ID Slave Tx Transfer completed callback ID + * @arg @ref HAL_I2C_SLAVE_RX_COMPLETE_CB_ID Slave Rx Transfer completed callback ID + * @arg @ref HAL_I2C_LISTEN_COMPLETE_CB_ID Listen Complete callback ID + * @arg @ref HAL_I2C_MEM_TX_COMPLETE_CB_ID Memory Tx Transfer callback ID + * @arg @ref HAL_I2C_MEM_RX_COMPLETE_CB_ID Memory Rx Transfer completed callback ID + * @arg @ref HAL_I2C_ERROR_CB_ID Error callback ID + * @arg @ref HAL_I2C_ABORT_CB_ID Abort callback ID + * @arg @ref HAL_I2C_MSPINIT_CB_ID MspInit callback ID + * @arg @ref HAL_I2C_MSPDEINIT_CB_ID MspDeInit callback ID + * @param pCallback pointer to the Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_RegisterCallback(I2C_HandleTypeDef *hi2c, HAL_I2C_CallbackIDTypeDef CallbackID, + pI2C_CallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK; + + return HAL_ERROR; + } + + if (HAL_I2C_STATE_READY == hi2c->State) + { + switch (CallbackID) + { + case HAL_I2C_MASTER_TX_COMPLETE_CB_ID : + hi2c->MasterTxCpltCallback = pCallback; + break; + + case HAL_I2C_MASTER_RX_COMPLETE_CB_ID : + hi2c->MasterRxCpltCallback = pCallback; + break; + + case HAL_I2C_SLAVE_TX_COMPLETE_CB_ID : + hi2c->SlaveTxCpltCallback = pCallback; + break; + + case HAL_I2C_SLAVE_RX_COMPLETE_CB_ID : + hi2c->SlaveRxCpltCallback = pCallback; + break; + + case HAL_I2C_LISTEN_COMPLETE_CB_ID : + hi2c->ListenCpltCallback = pCallback; + break; + + case HAL_I2C_MEM_TX_COMPLETE_CB_ID : + hi2c->MemTxCpltCallback = pCallback; + break; + + case HAL_I2C_MEM_RX_COMPLETE_CB_ID : + hi2c->MemRxCpltCallback = pCallback; + break; + + case HAL_I2C_ERROR_CB_ID : + hi2c->ErrorCallback = pCallback; + break; + + case HAL_I2C_ABORT_CB_ID : + hi2c->AbortCpltCallback = pCallback; + break; + + case HAL_I2C_MSPINIT_CB_ID : + hi2c->MspInitCallback = pCallback; + break; + + case HAL_I2C_MSPDEINIT_CB_ID : + hi2c->MspDeInitCallback = pCallback; + break; + + default : + /* Update the error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (HAL_I2C_STATE_RESET == hi2c->State) + { + switch (CallbackID) + { + case HAL_I2C_MSPINIT_CB_ID : + hi2c->MspInitCallback = pCallback; + break; + + case HAL_I2C_MSPDEINIT_CB_ID : + hi2c->MspDeInitCallback = pCallback; + break; + + default : + /* Update the error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + return status; +} + +/** + * @brief Unregister an I2C Callback + * I2C callback is redirected to the weak predefined callback + * @note The HAL_I2C_UnRegisterCallback() may be called before HAL_I2C_Init() in HAL_I2C_STATE_RESET + * to un-register callbacks for HAL_I2C_MSPINIT_CB_ID and HAL_I2C_MSPDEINIT_CB_ID. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param CallbackID ID of the callback to be unregistered + * This parameter can be one of the following values: + * This parameter can be one of the following values: + * @arg @ref HAL_I2C_MASTER_TX_COMPLETE_CB_ID Master Tx Transfer completed callback ID + * @arg @ref HAL_I2C_MASTER_RX_COMPLETE_CB_ID Master Rx Transfer completed callback ID + * @arg @ref HAL_I2C_SLAVE_TX_COMPLETE_CB_ID Slave Tx Transfer completed callback ID + * @arg @ref HAL_I2C_SLAVE_RX_COMPLETE_CB_ID Slave Rx Transfer completed callback ID + * @arg @ref HAL_I2C_LISTEN_COMPLETE_CB_ID Listen Complete callback ID + * @arg @ref HAL_I2C_MEM_TX_COMPLETE_CB_ID Memory Tx Transfer callback ID + * @arg @ref HAL_I2C_MEM_RX_COMPLETE_CB_ID Memory Rx Transfer completed callback ID + * @arg @ref HAL_I2C_ERROR_CB_ID Error callback ID + * @arg @ref HAL_I2C_ABORT_CB_ID Abort callback ID + * @arg @ref HAL_I2C_MSPINIT_CB_ID MspInit callback ID + * @arg @ref HAL_I2C_MSPDEINIT_CB_ID MspDeInit callback ID + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_UnRegisterCallback(I2C_HandleTypeDef *hi2c, HAL_I2C_CallbackIDTypeDef CallbackID) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (HAL_I2C_STATE_READY == hi2c->State) + { + switch (CallbackID) + { + case HAL_I2C_MASTER_TX_COMPLETE_CB_ID : + hi2c->MasterTxCpltCallback = HAL_I2C_MasterTxCpltCallback; /* Legacy weak MasterTxCpltCallback */ + break; + + case HAL_I2C_MASTER_RX_COMPLETE_CB_ID : + hi2c->MasterRxCpltCallback = HAL_I2C_MasterRxCpltCallback; /* Legacy weak MasterRxCpltCallback */ + break; + + case HAL_I2C_SLAVE_TX_COMPLETE_CB_ID : + hi2c->SlaveTxCpltCallback = HAL_I2C_SlaveTxCpltCallback; /* Legacy weak SlaveTxCpltCallback */ + break; + + case HAL_I2C_SLAVE_RX_COMPLETE_CB_ID : + hi2c->SlaveRxCpltCallback = HAL_I2C_SlaveRxCpltCallback; /* Legacy weak SlaveRxCpltCallback */ + break; + + case HAL_I2C_LISTEN_COMPLETE_CB_ID : + hi2c->ListenCpltCallback = HAL_I2C_ListenCpltCallback; /* Legacy weak ListenCpltCallback */ + break; + + case HAL_I2C_MEM_TX_COMPLETE_CB_ID : + hi2c->MemTxCpltCallback = HAL_I2C_MemTxCpltCallback; /* Legacy weak MemTxCpltCallback */ + break; + + case HAL_I2C_MEM_RX_COMPLETE_CB_ID : + hi2c->MemRxCpltCallback = HAL_I2C_MemRxCpltCallback; /* Legacy weak MemRxCpltCallback */ + break; + + case HAL_I2C_ERROR_CB_ID : + hi2c->ErrorCallback = HAL_I2C_ErrorCallback; /* Legacy weak ErrorCallback */ + break; + + case HAL_I2C_ABORT_CB_ID : + hi2c->AbortCpltCallback = HAL_I2C_AbortCpltCallback; /* Legacy weak AbortCpltCallback */ + break; + + case HAL_I2C_MSPINIT_CB_ID : + hi2c->MspInitCallback = HAL_I2C_MspInit; /* Legacy weak MspInit */ + break; + + case HAL_I2C_MSPDEINIT_CB_ID : + hi2c->MspDeInitCallback = HAL_I2C_MspDeInit; /* Legacy weak MspDeInit */ + break; + + default : + /* Update the error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (HAL_I2C_STATE_RESET == hi2c->State) + { + switch (CallbackID) + { + case HAL_I2C_MSPINIT_CB_ID : + hi2c->MspInitCallback = HAL_I2C_MspInit; /* Legacy weak MspInit */ + break; + + case HAL_I2C_MSPDEINIT_CB_ID : + hi2c->MspDeInitCallback = HAL_I2C_MspDeInit; /* Legacy weak MspDeInit */ + break; + + default : + /* Update the error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + return status; +} + +/** + * @brief Register the Slave Address Match I2C Callback + * To be used instead of the weak HAL_I2C_AddrCallback() predefined callback + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param pCallback pointer to the Address Match Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_RegisterAddrCallback(I2C_HandleTypeDef *hi2c, pI2C_AddrCallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK; + + return HAL_ERROR; + } + + if (HAL_I2C_STATE_READY == hi2c->State) + { + hi2c->AddrCallback = pCallback; + } + else + { + /* Update the error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + return status; +} + +/** + * @brief UnRegister the Slave Address Match I2C Callback + * Info Ready I2C Callback is redirected to the weak HAL_I2C_AddrCallback() predefined callback + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_UnRegisterAddrCallback(I2C_HandleTypeDef *hi2c) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (HAL_I2C_STATE_READY == hi2c->State) + { + hi2c->AddrCallback = HAL_I2C_AddrCallback; /* Legacy weak AddrCallback */ + } + else + { + /* Update the error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + return status; +} + +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** @defgroup I2C_Exported_Functions_Group2 Input and Output operation functions + * @brief Data transfers functions + * +@verbatim + =============================================================================== + ##### IO operation functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to manage the I2C data + transfers. + + (#) There are two modes of transfer: + (++) Blocking mode : The communication is performed in the polling mode. + The status of all data processing is returned by the same function + after finishing transfer. + (++) No-Blocking mode : The communication is performed using Interrupts + or DMA. These functions return the status of the transfer startup. + The end of the data processing will be indicated through the + dedicated I2C IRQ when using Interrupt mode or the DMA IRQ when + using DMA mode. + + (#) Blocking mode functions are : + (++) HAL_I2C_Master_Transmit() + (++) HAL_I2C_Master_Receive() + (++) HAL_I2C_Slave_Transmit() + (++) HAL_I2C_Slave_Receive() + (++) HAL_I2C_Mem_Write() + (++) HAL_I2C_Mem_Read() + (++) HAL_I2C_IsDeviceReady() + + (#) No-Blocking mode functions with Interrupt are : + (++) HAL_I2C_Master_Transmit_IT() + (++) HAL_I2C_Master_Receive_IT() + (++) HAL_I2C_Slave_Transmit_IT() + (++) HAL_I2C_Slave_Receive_IT() + (++) HAL_I2C_Mem_Write_IT() + (++) HAL_I2C_Mem_Read_IT() + (++) HAL_I2C_Master_Seq_Transmit_IT() + (++) HAL_I2C_Master_Seq_Receive_IT() + (++) HAL_I2C_Slave_Seq_Transmit_IT() + (++) HAL_I2C_Slave_Seq_Receive_IT() + (++) HAL_I2C_EnableListen_IT() + (++) HAL_I2C_DisableListen_IT() + (++) HAL_I2C_Master_Abort_IT() + + (#) No-Blocking mode functions with DMA are : + (++) HAL_I2C_Master_Transmit_DMA() + (++) HAL_I2C_Master_Receive_DMA() + (++) HAL_I2C_Slave_Transmit_DMA() + (++) HAL_I2C_Slave_Receive_DMA() + (++) HAL_I2C_Mem_Write_DMA() + (++) HAL_I2C_Mem_Read_DMA() + (++) HAL_I2C_Master_Seq_Transmit_DMA() + (++) HAL_I2C_Master_Seq_Receive_DMA() + (++) HAL_I2C_Slave_Seq_Transmit_DMA() + (++) HAL_I2C_Slave_Seq_Receive_DMA() + + (#) A set of Transfer Complete Callbacks are provided in non Blocking mode: + (++) HAL_I2C_MasterTxCpltCallback() + (++) HAL_I2C_MasterRxCpltCallback() + (++) HAL_I2C_SlaveTxCpltCallback() + (++) HAL_I2C_SlaveRxCpltCallback() + (++) HAL_I2C_MemTxCpltCallback() + (++) HAL_I2C_MemRxCpltCallback() + (++) HAL_I2C_AddrCallback() + (++) HAL_I2C_ListenCpltCallback() + (++) HAL_I2C_ErrorCallback() + (++) HAL_I2C_AbortCpltCallback() + +@endverbatim + * @{ + */ + +/** + * @brief Transmits in master mode an amount of data in blocking mode. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Master_Transmit(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size, uint32_t Timeout) +{ + uint32_t tickstart; + uint32_t xfermode; + + if (hi2c->State == HAL_I2C_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* Init tickstart for timeout management*/ + tickstart = HAL_GetTick(); + + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + hi2c->State = HAL_I2C_STATE_BUSY_TX; + hi2c->Mode = HAL_I2C_MODE_MASTER; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferISR = NULL; + + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + xfermode = I2C_RELOAD_MODE; + } + else + { + hi2c->XferSize = hi2c->XferCount; + xfermode = I2C_AUTOEND_MODE; + } + + if (hi2c->XferSize > 0U) + { + /* Preload TX register */ + /* Write data to TXDR */ + hi2c->Instance->TXDR = *hi2c->pBuffPtr; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + hi2c->XferCount--; + hi2c->XferSize--; + + /* Send Slave Address */ + /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)(hi2c->XferSize + 1U), xfermode, + I2C_GENERATE_START_WRITE); + } + else + { + /* Send Slave Address */ + /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, + I2C_GENERATE_START_WRITE); + } + + while (hi2c->XferCount > 0U) + { + /* Wait until TXIS flag is set */ + if (I2C_WaitOnTXISFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + /* Write data to TXDR */ + hi2c->Instance->TXDR = *hi2c->pBuffPtr; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + hi2c->XferCount--; + hi2c->XferSize--; + + if ((hi2c->XferCount != 0U) && (hi2c->XferSize == 0U)) + { + /* Wait until TCR flag is set */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TCR, RESET, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_RELOAD_MODE, + I2C_NO_STARTSTOP); + } + else + { + hi2c->XferSize = hi2c->XferCount; + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, + I2C_NO_STARTSTOP); + } + } + } + + /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */ + /* Wait until STOPF flag is set */ + if (I2C_WaitOnSTOPFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Clear STOP Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); + + /* Clear Configuration Register 2 */ + I2C_RESET_CR2(hi2c); + + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receives in master mode an amount of data in blocking mode. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Master_Receive(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size, uint32_t Timeout) +{ + uint32_t tickstart; + + if (hi2c->State == HAL_I2C_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* Init tickstart for timeout management*/ + tickstart = HAL_GetTick(); + + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + hi2c->State = HAL_I2C_STATE_BUSY_RX; + hi2c->Mode = HAL_I2C_MODE_MASTER; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferISR = NULL; + + /* Send Slave Address */ + /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */ + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = 1U; + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_RELOAD_MODE, + I2C_GENERATE_START_READ); + } + else + { + hi2c->XferSize = hi2c->XferCount; + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, + I2C_GENERATE_START_READ); + } + + while (hi2c->XferCount > 0U) + { + /* Wait until RXNE flag is set */ + if (I2C_WaitOnRXNEFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Read data from RXDR */ + *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->RXDR; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + hi2c->XferSize--; + hi2c->XferCount--; + + if ((hi2c->XferCount != 0U) && (hi2c->XferSize == 0U)) + { + /* Wait until TCR flag is set */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TCR, RESET, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_RELOAD_MODE, + I2C_NO_STARTSTOP); + } + else + { + hi2c->XferSize = hi2c->XferCount; + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, + I2C_NO_STARTSTOP); + } + } + } + + /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */ + /* Wait until STOPF flag is set */ + if (I2C_WaitOnSTOPFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Clear STOP Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); + + /* Clear Configuration Register 2 */ + I2C_RESET_CR2(hi2c); + + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Transmits in slave mode an amount of data in blocking mode. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Slave_Transmit(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, + uint32_t Timeout) +{ + uint32_t tickstart; + uint16_t tmpXferCount; + HAL_StatusTypeDef error; + + if (hi2c->State == HAL_I2C_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; + return HAL_ERROR; + } + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* Init tickstart for timeout management*/ + tickstart = HAL_GetTick(); + + hi2c->State = HAL_I2C_STATE_BUSY_TX; + hi2c->Mode = HAL_I2C_MODE_SLAVE; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferISR = NULL; + + /* Enable Address Acknowledge */ + hi2c->Instance->CR2 &= ~I2C_CR2_NACK; + + /* Preload TX data if no stretch enable */ + if (hi2c->Init.NoStretchMode == I2C_NOSTRETCH_ENABLE) + { + /* Preload TX register */ + /* Write data to TXDR */ + hi2c->Instance->TXDR = *hi2c->pBuffPtr; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + hi2c->XferCount--; + } + + /* Wait until ADDR flag is set */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_ADDR, RESET, Timeout, tickstart) != HAL_OK) + { + /* Disable Address Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + + /* Flush TX register */ + I2C_Flush_TXDR(hi2c); + + return HAL_ERROR; + } + + /* Clear ADDR flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR); + + /* If 10bit addressing mode is selected */ + if (hi2c->Init.AddressingMode == I2C_ADDRESSINGMODE_10BIT) + { + /* Wait until ADDR flag is set */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_ADDR, RESET, Timeout, tickstart) != HAL_OK) + { + /* Disable Address Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + + /* Flush TX register */ + I2C_Flush_TXDR(hi2c); + + return HAL_ERROR; + } + + /* Clear ADDR flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR); + } + + /* Wait until DIR flag is set Transmitter mode */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_DIR, RESET, Timeout, tickstart) != HAL_OK) + { + /* Disable Address Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + + /* Flush TX register */ + I2C_Flush_TXDR(hi2c); + + return HAL_ERROR; + } + + while (hi2c->XferCount > 0U) + { + /* Wait until TXIS flag is set */ + if (I2C_WaitOnTXISFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) + { + /* Disable Address Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + return HAL_ERROR; + } + + /* Write data to TXDR */ + hi2c->Instance->TXDR = *hi2c->pBuffPtr; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + hi2c->XferCount--; + } + + /* Wait until AF flag is set */ + error = I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_AF, RESET, Timeout, tickstart); + + if (error != HAL_OK) + { + /* Check that I2C transfer finished */ + /* if yes, normal use case, a NACK is sent by the MASTER when Transfer is finished */ + /* Mean XferCount == 0 */ + + tmpXferCount = hi2c->XferCount; + if ((hi2c->ErrorCode == HAL_I2C_ERROR_AF) && (tmpXferCount == 0U)) + { + /* Reset ErrorCode to NONE */ + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + } + else + { + /* Disable Address Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + return HAL_ERROR; + } + } + else + { + /* Flush TX register */ + I2C_Flush_TXDR(hi2c); + + /* Clear AF flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + + /* Wait until STOP flag is set */ + if (I2C_WaitOnSTOPFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) + { + /* Disable Address Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + + return HAL_ERROR; + } + + /* Clear STOP flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); + } + + /* Wait until BUSY flag is reset */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, Timeout, tickstart) != HAL_OK) + { + /* Disable Address Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + return HAL_ERROR; + } + + /* Disable Address Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive in slave mode an amount of data in blocking mode + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Slave_Receive(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, + uint32_t Timeout) +{ + uint32_t tickstart; + + if (hi2c->State == HAL_I2C_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; + return HAL_ERROR; + } + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* Init tickstart for timeout management*/ + tickstart = HAL_GetTick(); + + hi2c->State = HAL_I2C_STATE_BUSY_RX; + hi2c->Mode = HAL_I2C_MODE_SLAVE; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferSize = hi2c->XferCount; + hi2c->XferISR = NULL; + + /* Enable Address Acknowledge */ + hi2c->Instance->CR2 &= ~I2C_CR2_NACK; + + /* Wait until ADDR flag is set */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_ADDR, RESET, Timeout, tickstart) != HAL_OK) + { + /* Disable Address Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + return HAL_ERROR; + } + + /* Clear ADDR flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR); + + /* Wait until DIR flag is reset Receiver mode */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_DIR, SET, Timeout, tickstart) != HAL_OK) + { + /* Disable Address Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + return HAL_ERROR; + } + + while (hi2c->XferCount > 0U) + { + /* Wait until RXNE flag is set */ + if (I2C_WaitOnRXNEFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) + { + /* Disable Address Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + + /* Store Last receive data if any */ + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_RXNE) == SET) + { + /* Read data from RXDR */ + *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->RXDR; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + hi2c->XferCount--; + hi2c->XferSize--; + } + + return HAL_ERROR; + } + + /* Read data from RXDR */ + *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->RXDR; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + hi2c->XferCount--; + hi2c->XferSize--; + } + + /* Wait until STOP flag is set */ + if (I2C_WaitOnSTOPFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) + { + /* Disable Address Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + return HAL_ERROR; + } + + /* Clear STOP flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); + + /* Wait until BUSY flag is reset */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, Timeout, tickstart) != HAL_OK) + { + /* Disable Address Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + return HAL_ERROR; + } + + /* Disable Address Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Transmit in master mode an amount of data in non-blocking mode with Interrupt + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Master_Transmit_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size) +{ + uint32_t xfermode; + + if (hi2c->State == HAL_I2C_STATE_READY) + { + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET) + { + return HAL_BUSY; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY_TX; + hi2c->Mode = HAL_I2C_MODE_MASTER; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->XferISR = I2C_Master_ISR_IT; + + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + xfermode = I2C_RELOAD_MODE; + } + else + { + hi2c->XferSize = hi2c->XferCount; + xfermode = I2C_AUTOEND_MODE; + } + + /* Send Slave Address */ + /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE */ + if (hi2c->XferSize > 0U) + { + /* Preload TX register */ + /* Write data to TXDR */ + hi2c->Instance->TXDR = *hi2c->pBuffPtr; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + hi2c->XferCount--; + hi2c->XferSize--; + + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)(hi2c->XferSize + 1U), xfermode, + I2C_GENERATE_START_WRITE); + } + else + { + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, + I2C_GENERATE_START_WRITE); + } + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + + /* Enable ERR, TC, STOP, NACK, TXI interrupt */ + /* possible to enable all of these */ + /* I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | + I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */ + I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive in master mode an amount of data in non-blocking mode with Interrupt + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Master_Receive_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size) +{ + uint32_t xfermode; + + if (hi2c->State == HAL_I2C_STATE_READY) + { + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET) + { + return HAL_BUSY; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY_RX; + hi2c->Mode = HAL_I2C_MODE_MASTER; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->XferISR = I2C_Master_ISR_IT; + + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = 1U; + xfermode = I2C_RELOAD_MODE; + } + else + { + hi2c->XferSize = hi2c->XferCount; + xfermode = I2C_AUTOEND_MODE; + } + + /* Send Slave Address */ + /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, I2C_GENERATE_START_READ); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + + /* Enable ERR, TC, STOP, NACK, RXI interrupt */ + /* possible to enable all of these */ + /* I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | + I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */ + I2C_Enable_IRQ(hi2c, I2C_XFER_RX_IT); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Transmit in slave mode an amount of data in non-blocking mode with Interrupt + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Slave_Transmit_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size) +{ + if (hi2c->State == HAL_I2C_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY_TX; + hi2c->Mode = HAL_I2C_MODE_SLAVE; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Enable Address Acknowledge */ + hi2c->Instance->CR2 &= ~I2C_CR2_NACK; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferSize = hi2c->XferCount; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->XferISR = I2C_Slave_ISR_IT; + + /* Preload TX data if no stretch enable */ + if (hi2c->Init.NoStretchMode == I2C_NOSTRETCH_ENABLE) + { + /* Preload TX register */ + /* Write data to TXDR */ + hi2c->Instance->TXDR = *hi2c->pBuffPtr; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + hi2c->XferCount--; + hi2c->XferSize--; + } + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + + /* Enable ERR, TC, STOP, NACK, TXI interrupt */ + /* possible to enable all of these */ + /* I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | + I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */ + I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT | I2C_XFER_LISTEN_IT); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive in slave mode an amount of data in non-blocking mode with Interrupt + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Slave_Receive_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size) +{ + if (hi2c->State == HAL_I2C_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY_RX; + hi2c->Mode = HAL_I2C_MODE_SLAVE; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Enable Address Acknowledge */ + hi2c->Instance->CR2 &= ~I2C_CR2_NACK; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferSize = hi2c->XferCount; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->XferISR = I2C_Slave_ISR_IT; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + + /* Enable ERR, TC, STOP, NACK, RXI interrupt */ + /* possible to enable all of these */ + /* I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | + I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */ + I2C_Enable_IRQ(hi2c, I2C_XFER_RX_IT | I2C_XFER_LISTEN_IT); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Transmit in master mode an amount of data in non-blocking mode with DMA + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Master_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size) +{ + uint32_t xfermode; + HAL_StatusTypeDef dmaxferstatus; + uint32_t sizetoxfer = 0U; + + if (hi2c->State == HAL_I2C_STATE_READY) + { + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET) + { + return HAL_BUSY; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY_TX; + hi2c->Mode = HAL_I2C_MODE_MASTER; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->XferISR = I2C_Master_ISR_DMA; + + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + xfermode = I2C_RELOAD_MODE; + } + else + { + hi2c->XferSize = hi2c->XferCount; + xfermode = I2C_AUTOEND_MODE; + } + + if (hi2c->XferSize > 0U) + { + /* Preload TX register */ + /* Write data to TXDR */ + hi2c->Instance->TXDR = *hi2c->pBuffPtr; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + sizetoxfer = hi2c->XferSize; + hi2c->XferCount--; + hi2c->XferSize--; + } + + if (hi2c->XferSize > 0U) + { + if (hi2c->hdmatx != NULL) + { + /* Set the I2C DMA transfer complete callback */ + hi2c->hdmatx->XferCpltCallback = I2C_DMAMasterTransmitCplt; + + /* Set the DMA error callback */ + hi2c->hdmatx->XferErrorCallback = I2C_DMAError; + + /* Set the unused DMA callbacks to NULL */ + hi2c->hdmatx->XferHalfCpltCallback = NULL; + hi2c->hdmatx->XferAbortCallback = NULL; + + /* Enable the DMA channel */ + dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)hi2c->pBuffPtr, + (uint32_t)&hi2c->Instance->TXDR, hi2c->XferSize); + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + if (dmaxferstatus == HAL_OK) + { + /* Send Slave Address */ + /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)(hi2c->XferSize + 1U), + xfermode, I2C_GENERATE_START_WRITE); + + /* Update XferCount value */ + hi2c->XferCount -= hi2c->XferSize; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* Enable ERR and NACK interrupts */ + I2C_Enable_IRQ(hi2c, I2C_XFER_ERROR_IT); + + /* Enable DMA Request */ + hi2c->Instance->CR1 |= I2C_CR1_TXDMAEN; + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + } + else + { + /* Update Transfer ISR function pointer */ + hi2c->XferISR = I2C_Master_ISR_IT; + + /* Send Slave Address */ + /* Set NBYTES to write and generate START condition */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)sizetoxfer, I2C_AUTOEND_MODE, + I2C_GENERATE_START_WRITE); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* Enable ERR, TC, STOP, NACK, TXI interrupt */ + /* possible to enable all of these */ + /* I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | + I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */ + I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT); + } + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive in master mode an amount of data in non-blocking mode with DMA + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Master_Receive_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size) +{ + uint32_t xfermode; + HAL_StatusTypeDef dmaxferstatus; + + if (hi2c->State == HAL_I2C_STATE_READY) + { + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET) + { + return HAL_BUSY; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY_RX; + hi2c->Mode = HAL_I2C_MODE_MASTER; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->XferISR = I2C_Master_ISR_DMA; + + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = 1U; + xfermode = I2C_RELOAD_MODE; + } + else + { + hi2c->XferSize = hi2c->XferCount; + xfermode = I2C_AUTOEND_MODE; + } + + if (hi2c->XferSize > 0U) + { + if (hi2c->hdmarx != NULL) + { + /* Set the I2C DMA transfer complete callback */ + hi2c->hdmarx->XferCpltCallback = I2C_DMAMasterReceiveCplt; + + /* Set the DMA error callback */ + hi2c->hdmarx->XferErrorCallback = I2C_DMAError; + + /* Set the unused DMA callbacks to NULL */ + hi2c->hdmarx->XferHalfCpltCallback = NULL; + hi2c->hdmarx->XferAbortCallback = NULL; + + /* Enable the DMA channel */ + dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmarx, (uint32_t)&hi2c->Instance->RXDR, (uint32_t)pData, + hi2c->XferSize); + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + if (dmaxferstatus == HAL_OK) + { + /* Send Slave Address */ + /* Set NBYTES to read and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, I2C_GENERATE_START_READ); + + /* Update XferCount value */ + hi2c->XferCount -= hi2c->XferSize; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* Enable ERR and NACK interrupts */ + I2C_Enable_IRQ(hi2c, I2C_XFER_ERROR_IT); + + /* Enable DMA Request */ + hi2c->Instance->CR1 |= I2C_CR1_RXDMAEN; + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + } + else + { + /* Update Transfer ISR function pointer */ + hi2c->XferISR = I2C_Master_ISR_IT; + + /* Send Slave Address */ + /* Set NBYTES to read and generate START condition */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, + I2C_GENERATE_START_READ); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* Enable ERR, TC, STOP, NACK, RXI interrupt */ + /* possible to enable all of these */ + /* I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | + I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */ + I2C_Enable_IRQ(hi2c, I2C_XFER_RX_IT); + } + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Transmit in slave mode an amount of data in non-blocking mode with DMA + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Slave_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size) +{ + HAL_StatusTypeDef dmaxferstatus; + + if (hi2c->State == HAL_I2C_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; + return HAL_ERROR; + } + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY_TX; + hi2c->Mode = HAL_I2C_MODE_SLAVE; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferSize = hi2c->XferCount; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->XferISR = I2C_Slave_ISR_DMA; + + /* Preload TX data if no stretch enable */ + if (hi2c->Init.NoStretchMode == I2C_NOSTRETCH_ENABLE) + { + /* Preload TX register */ + /* Write data to TXDR */ + hi2c->Instance->TXDR = *hi2c->pBuffPtr; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + hi2c->XferCount--; + hi2c->XferSize--; + } + + if (hi2c->XferCount != 0U) + { + if (hi2c->hdmatx != NULL) + { + /* Set the I2C DMA transfer complete callback */ + hi2c->hdmatx->XferCpltCallback = I2C_DMASlaveTransmitCplt; + + /* Set the DMA error callback */ + hi2c->hdmatx->XferErrorCallback = I2C_DMAError; + + /* Set the unused DMA callbacks to NULL */ + hi2c->hdmatx->XferHalfCpltCallback = NULL; + hi2c->hdmatx->XferAbortCallback = NULL; + + /* Enable the DMA channel */ + dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmatx, + (uint32_t)hi2c->pBuffPtr, (uint32_t)&hi2c->Instance->TXDR, + hi2c->XferSize); + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_LISTEN; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + if (dmaxferstatus == HAL_OK) + { + /* Enable Address Acknowledge */ + hi2c->Instance->CR2 &= ~I2C_CR2_NACK; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* Enable ERR, STOP, NACK, ADDR interrupts */ + I2C_Enable_IRQ(hi2c, I2C_XFER_LISTEN_IT); + + /* Enable DMA Request */ + hi2c->Instance->CR1 |= I2C_CR1_TXDMAEN; + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_LISTEN; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + } + else + { + /* Enable Address Acknowledge */ + hi2c->Instance->CR2 &= ~I2C_CR2_NACK; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* Enable ERR, STOP, NACK, ADDR interrupts */ + I2C_Enable_IRQ(hi2c, I2C_XFER_LISTEN_IT); + } + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive in slave mode an amount of data in non-blocking mode with DMA + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Slave_Receive_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size) +{ + HAL_StatusTypeDef dmaxferstatus; + + if (hi2c->State == HAL_I2C_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; + return HAL_ERROR; + } + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY_RX; + hi2c->Mode = HAL_I2C_MODE_SLAVE; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferSize = hi2c->XferCount; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->XferISR = I2C_Slave_ISR_DMA; + + if (hi2c->hdmarx != NULL) + { + /* Set the I2C DMA transfer complete callback */ + hi2c->hdmarx->XferCpltCallback = I2C_DMASlaveReceiveCplt; + + /* Set the DMA error callback */ + hi2c->hdmarx->XferErrorCallback = I2C_DMAError; + + /* Set the unused DMA callbacks to NULL */ + hi2c->hdmarx->XferHalfCpltCallback = NULL; + hi2c->hdmarx->XferAbortCallback = NULL; + + /* Enable the DMA channel */ + dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmarx, (uint32_t)&hi2c->Instance->RXDR, (uint32_t)pData, + hi2c->XferSize); + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_LISTEN; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + if (dmaxferstatus == HAL_OK) + { + /* Enable Address Acknowledge */ + hi2c->Instance->CR2 &= ~I2C_CR2_NACK; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* Enable ERR, STOP, NACK, ADDR interrupts */ + I2C_Enable_IRQ(hi2c, I2C_XFER_LISTEN_IT); + + /* Enable DMA Request */ + hi2c->Instance->CR1 |= I2C_CR1_RXDMAEN; + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_LISTEN; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Write an amount of data in blocking mode to a specific memory address + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param MemAddress Internal memory address + * @param MemAddSize Size of internal memory address + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Mem_Write(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, + uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout) +{ + uint32_t tickstart; + + /* Check the parameters */ + assert_param(IS_I2C_MEMADD_SIZE(MemAddSize)); + + if (hi2c->State == HAL_I2C_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; + return HAL_ERROR; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* Init tickstart for timeout management*/ + tickstart = HAL_GetTick(); + + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + hi2c->State = HAL_I2C_STATE_BUSY_TX; + hi2c->Mode = HAL_I2C_MODE_MEM; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferISR = NULL; + + /* Send Slave Address and Memory Address */ + if (I2C_RequestMemoryWrite(hi2c, DevAddress, MemAddress, MemAddSize, Timeout, tickstart) != HAL_OK) + { + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + return HAL_ERROR; + } + + /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE */ + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_RELOAD_MODE, I2C_NO_STARTSTOP); + } + else + { + hi2c->XferSize = hi2c->XferCount; + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, I2C_NO_STARTSTOP); + } + + do + { + /* Wait until TXIS flag is set */ + if (I2C_WaitOnTXISFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Write data to TXDR */ + hi2c->Instance->TXDR = *hi2c->pBuffPtr; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + hi2c->XferCount--; + hi2c->XferSize--; + + if ((hi2c->XferCount != 0U) && (hi2c->XferSize == 0U)) + { + /* Wait until TCR flag is set */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TCR, RESET, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_RELOAD_MODE, + I2C_NO_STARTSTOP); + } + else + { + hi2c->XferSize = hi2c->XferCount; + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, + I2C_NO_STARTSTOP); + } + } + + } while (hi2c->XferCount > 0U); + + /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */ + /* Wait until STOPF flag is reset */ + if (I2C_WaitOnSTOPFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Clear STOP Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); + + /* Clear Configuration Register 2 */ + I2C_RESET_CR2(hi2c); + + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Read an amount of data in blocking mode from a specific memory address + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param MemAddress Internal memory address + * @param MemAddSize Size of internal memory address + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Mem_Read(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, + uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout) +{ + uint32_t tickstart; + + /* Check the parameters */ + assert_param(IS_I2C_MEMADD_SIZE(MemAddSize)); + + if (hi2c->State == HAL_I2C_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; + return HAL_ERROR; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* Init tickstart for timeout management*/ + tickstart = HAL_GetTick(); + + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + hi2c->State = HAL_I2C_STATE_BUSY_RX; + hi2c->Mode = HAL_I2C_MODE_MEM; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferISR = NULL; + + /* Send Slave Address and Memory Address */ + if (I2C_RequestMemoryRead(hi2c, DevAddress, MemAddress, MemAddSize, Timeout, tickstart) != HAL_OK) + { + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + return HAL_ERROR; + } + + /* Send Slave Address */ + /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */ + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = 1U; + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_RELOAD_MODE, + I2C_GENERATE_START_READ); + } + else + { + hi2c->XferSize = hi2c->XferCount; + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, + I2C_GENERATE_START_READ); + } + + do + { + /* Wait until RXNE flag is set */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_RXNE, RESET, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Read data from RXDR */ + *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->RXDR; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + hi2c->XferSize--; + hi2c->XferCount--; + + if ((hi2c->XferCount != 0U) && (hi2c->XferSize == 0U)) + { + /* Wait until TCR flag is set */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TCR, RESET, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = 1U; + I2C_TransferConfig(hi2c, DevAddress, (uint8_t) hi2c->XferSize, I2C_RELOAD_MODE, + I2C_NO_STARTSTOP); + } + else + { + hi2c->XferSize = hi2c->XferCount; + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, + I2C_NO_STARTSTOP); + } + } + } while (hi2c->XferCount > 0U); + + /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */ + /* Wait until STOPF flag is reset */ + if (I2C_WaitOnSTOPFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Clear STOP Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); + + /* Clear Configuration Register 2 */ + I2C_RESET_CR2(hi2c); + + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} +/** + * @brief Write an amount of data in non-blocking mode with Interrupt to a specific memory address + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param MemAddress Internal memory address + * @param MemAddSize Size of internal memory address + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Mem_Write_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, + uint16_t MemAddSize, uint8_t *pData, uint16_t Size) +{ + /* Check the parameters */ + assert_param(IS_I2C_MEMADD_SIZE(MemAddSize)); + + if (hi2c->State == HAL_I2C_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; + return HAL_ERROR; + } + + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET) + { + return HAL_BUSY; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY_TX; + hi2c->Mode = HAL_I2C_MODE_MEM; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->XferSize = 0U; + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->XferISR = I2C_Mem_ISR_IT; + hi2c->Devaddress = DevAddress; + + /* If Memory address size is 8Bit */ + if (MemAddSize == I2C_MEMADD_SIZE_8BIT) + { + /* Prefetch Memory Address */ + hi2c->Instance->TXDR = I2C_MEM_ADD_LSB(MemAddress); + + /* Reset Memaddress content */ + hi2c->Memaddress = 0xFFFFFFFFU; + } + /* If Memory address size is 16Bit */ + else + { + /* Prefetch Memory Address (MSB part, LSB will be manage through interrupt) */ + hi2c->Instance->TXDR = I2C_MEM_ADD_MSB(MemAddress); + + /* Prepare Memaddress buffer for LSB part */ + hi2c->Memaddress = I2C_MEM_ADD_LSB(MemAddress); + } + /* Send Slave Address and Memory Address */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)MemAddSize, I2C_RELOAD_MODE, I2C_GENERATE_START_WRITE); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + + /* Enable ERR, TC, STOP, NACK, TXI interrupt */ + /* possible to enable all of these */ + /* I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | + I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */ + I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Read an amount of data in non-blocking mode with Interrupt from a specific memory address + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param MemAddress Internal memory address + * @param MemAddSize Size of internal memory address + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Mem_Read_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, + uint16_t MemAddSize, uint8_t *pData, uint16_t Size) +{ + /* Check the parameters */ + assert_param(IS_I2C_MEMADD_SIZE(MemAddSize)); + + if (hi2c->State == HAL_I2C_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; + return HAL_ERROR; + } + + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET) + { + return HAL_BUSY; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY_RX; + hi2c->Mode = HAL_I2C_MODE_MEM; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->XferISR = I2C_Mem_ISR_IT; + hi2c->Devaddress = DevAddress; + + /* If Memory address size is 8Bit */ + if (MemAddSize == I2C_MEMADD_SIZE_8BIT) + { + /* Prefetch Memory Address */ + hi2c->Instance->TXDR = I2C_MEM_ADD_LSB(MemAddress); + + /* Reset Memaddress content */ + hi2c->Memaddress = 0xFFFFFFFFU; + } + /* If Memory address size is 16Bit */ + else + { + /* Prefetch Memory Address (MSB part, LSB will be manage through interrupt) */ + hi2c->Instance->TXDR = I2C_MEM_ADD_MSB(MemAddress); + + /* Prepare Memaddress buffer for LSB part */ + hi2c->Memaddress = I2C_MEM_ADD_LSB(MemAddress); + } + /* Send Slave Address and Memory Address */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)MemAddSize, I2C_SOFTEND_MODE, I2C_GENERATE_START_WRITE); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + + /* Enable ERR, TC, STOP, NACK, TXI interrupt */ + /* possible to enable all of these */ + /* I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | + I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */ + I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Write an amount of data in non-blocking mode with DMA to a specific memory address + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param MemAddress Internal memory address + * @param MemAddSize Size of internal memory address + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Mem_Write_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, + uint16_t MemAddSize, uint8_t *pData, uint16_t Size) +{ + HAL_StatusTypeDef dmaxferstatus; + + /* Check the parameters */ + assert_param(IS_I2C_MEMADD_SIZE(MemAddSize)); + + if (hi2c->State == HAL_I2C_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; + return HAL_ERROR; + } + + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET) + { + return HAL_BUSY; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY_TX; + hi2c->Mode = HAL_I2C_MODE_MEM; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->XferISR = I2C_Mem_ISR_DMA; + hi2c->Devaddress = DevAddress; + + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + } + else + { + hi2c->XferSize = hi2c->XferCount; + } + + /* If Memory address size is 8Bit */ + if (MemAddSize == I2C_MEMADD_SIZE_8BIT) + { + /* Prefetch Memory Address */ + hi2c->Instance->TXDR = I2C_MEM_ADD_LSB(MemAddress); + + /* Reset Memaddress content */ + hi2c->Memaddress = 0xFFFFFFFFU; + } + /* If Memory address size is 16Bit */ + else + { + /* Prefetch Memory Address (MSB part, LSB will be manage through interrupt) */ + hi2c->Instance->TXDR = I2C_MEM_ADD_MSB(MemAddress); + + /* Prepare Memaddress buffer for LSB part */ + hi2c->Memaddress = I2C_MEM_ADD_LSB(MemAddress); + } + + if (hi2c->hdmatx != NULL) + { + /* Set the I2C DMA transfer complete callback */ + hi2c->hdmatx->XferCpltCallback = I2C_DMAMasterTransmitCplt; + + /* Set the DMA error callback */ + hi2c->hdmatx->XferErrorCallback = I2C_DMAError; + + /* Set the unused DMA callbacks to NULL */ + hi2c->hdmatx->XferHalfCpltCallback = NULL; + hi2c->hdmatx->XferAbortCallback = NULL; + + /* Enable the DMA channel */ + dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)pData, (uint32_t)&hi2c->Instance->TXDR, + hi2c->XferSize); + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + if (dmaxferstatus == HAL_OK) + { + /* Send Slave Address and Memory Address */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)MemAddSize, I2C_RELOAD_MODE, I2C_GENERATE_START_WRITE); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* Enable ERR, TC, STOP, NACK, TXI interrupt */ + /* possible to enable all of these */ + /* I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | + I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */ + I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT); + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Reads an amount of data in non-blocking mode with DMA from a specific memory address. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param MemAddress Internal memory address + * @param MemAddSize Size of internal memory address + * @param pData Pointer to data buffer + * @param Size Amount of data to be read + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Mem_Read_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, + uint16_t MemAddSize, uint8_t *pData, uint16_t Size) +{ + HAL_StatusTypeDef dmaxferstatus; + + /* Check the parameters */ + assert_param(IS_I2C_MEMADD_SIZE(MemAddSize)); + + if (hi2c->State == HAL_I2C_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; + return HAL_ERROR; + } + + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET) + { + return HAL_BUSY; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY_RX; + hi2c->Mode = HAL_I2C_MODE_MEM; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->XferISR = I2C_Mem_ISR_DMA; + hi2c->Devaddress = DevAddress; + + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + } + else + { + hi2c->XferSize = hi2c->XferCount; + } + + /* If Memory address size is 8Bit */ + if (MemAddSize == I2C_MEMADD_SIZE_8BIT) + { + /* Prefetch Memory Address */ + hi2c->Instance->TXDR = I2C_MEM_ADD_LSB(MemAddress); + + /* Reset Memaddress content */ + hi2c->Memaddress = 0xFFFFFFFFU; + } + /* If Memory address size is 16Bit */ + else + { + /* Prefetch Memory Address (MSB part, LSB will be manage through interrupt) */ + hi2c->Instance->TXDR = I2C_MEM_ADD_MSB(MemAddress); + + /* Prepare Memaddress buffer for LSB part */ + hi2c->Memaddress = I2C_MEM_ADD_LSB(MemAddress); + } + + if (hi2c->hdmarx != NULL) + { + /* Set the I2C DMA transfer complete callback */ + hi2c->hdmarx->XferCpltCallback = I2C_DMAMasterReceiveCplt; + + /* Set the DMA error callback */ + hi2c->hdmarx->XferErrorCallback = I2C_DMAError; + + /* Set the unused DMA callbacks to NULL */ + hi2c->hdmarx->XferHalfCpltCallback = NULL; + hi2c->hdmarx->XferAbortCallback = NULL; + + /* Enable the DMA channel */ + dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmarx, (uint32_t)&hi2c->Instance->RXDR, (uint32_t)pData, + hi2c->XferSize); + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + if (dmaxferstatus == HAL_OK) + { + /* Send Slave Address and Memory Address */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)MemAddSize, I2C_SOFTEND_MODE, I2C_GENERATE_START_WRITE); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* Enable ERR, TC, STOP, NACK, TXI interrupt */ + /* possible to enable all of these */ + /* I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | + I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */ + I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT); + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Checks if target device is ready for communication. + * @note This function is used with Memory devices + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param Trials Number of trials + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_IsDeviceReady(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint32_t Trials, + uint32_t Timeout) +{ + uint32_t tickstart; + + __IO uint32_t I2C_Trials = 0UL; + + FlagStatus tmp1; + FlagStatus tmp2; + + if (hi2c->State == HAL_I2C_STATE_READY) + { + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET) + { + return HAL_BUSY; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + do + { + /* Generate Start */ + hi2c->Instance->CR2 = I2C_GENERATE_START(hi2c->Init.AddressingMode, DevAddress); + + /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */ + /* Wait until STOPF flag is set or a NACK flag is set*/ + tickstart = HAL_GetTick(); + + tmp1 = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_STOPF); + tmp2 = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_AF); + + while ((tmp1 == RESET) && (tmp2 == RESET)) + { + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U)) + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + } + + tmp1 = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_STOPF); + tmp2 = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_AF); + } + + /* Check if the NACKF flag has not been set */ + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_AF) == RESET) + { + /* Wait until STOPF flag is reset */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_STOPF, RESET, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Clear STOP Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); + + /* Device is ready */ + hi2c->State = HAL_I2C_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; + } + else + { + /* Wait until STOPF flag is reset */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_STOPF, RESET, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Clear NACK Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + + /* Clear STOP Flag, auto generated with autoend*/ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); + } + + /* Increment Trials */ + I2C_Trials++; + } while (I2C_Trials < Trials); + + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Sequential transmit in master I2C mode an amount of data in non-blocking mode with Interrupt. + * @note This interface allow to manage repeated start condition when a direction change during transfer + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param XferOptions Options of Transfer, value of @ref I2C_XFEROPTIONS + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Master_Seq_Transmit_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size, uint32_t XferOptions) +{ + uint32_t xfermode; + uint32_t xferrequest = I2C_GENERATE_START_WRITE; + uint32_t sizetoxfer = 0U; + + /* Check the parameters */ + assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions)); + + if (hi2c->State == HAL_I2C_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY_TX; + hi2c->Mode = HAL_I2C_MODE_MASTER; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferOptions = XferOptions; + hi2c->XferISR = I2C_Master_ISR_IT; + + /* If hi2c->XferCount > MAX_NBYTE_SIZE, use reload mode */ + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + xfermode = I2C_RELOAD_MODE; + } + else + { + hi2c->XferSize = hi2c->XferCount; + xfermode = hi2c->XferOptions; + } + + if ((hi2c->XferSize > 0U) && ((XferOptions == I2C_FIRST_FRAME) || \ + (XferOptions == I2C_FIRST_AND_LAST_FRAME))) + { + /* Preload TX register */ + /* Write data to TXDR */ + hi2c->Instance->TXDR = *hi2c->pBuffPtr; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + sizetoxfer = hi2c->XferSize; + hi2c->XferCount--; + hi2c->XferSize--; + } + + /* If transfer direction not change and there is no request to start another frame, + do not generate Restart Condition */ + /* Mean Previous state is same as current state */ + if ((hi2c->PreviousState == I2C_STATE_MASTER_BUSY_TX) && \ + (IS_I2C_TRANSFER_OTHER_OPTIONS_REQUEST(XferOptions) == 0)) + { + xferrequest = I2C_NO_STARTSTOP; + } + else + { + /* Convert OTHER_xxx XferOptions if any */ + I2C_ConvertOtherXferOptions(hi2c); + + /* Update xfermode accordingly if no reload is necessary */ + if (hi2c->XferCount <= MAX_NBYTE_SIZE) + { + xfermode = hi2c->XferOptions; + } + } + + /* Send Slave Address and set NBYTES to write */ + if ((XferOptions == I2C_FIRST_FRAME) || (XferOptions == I2C_FIRST_AND_LAST_FRAME)) + { + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)sizetoxfer, xfermode, xferrequest); + } + else + { + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, xferrequest); + } + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* Enable ERR, TC, STOP, NACK, TXI interrupt */ + /* possible to enable all of these */ + /* I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | + I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */ + I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Sequential transmit in master I2C mode an amount of data in non-blocking mode with DMA. + * @note This interface allow to manage repeated start condition when a direction change during transfer + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param XferOptions Options of Transfer, value of @ref I2C_XFEROPTIONS + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Master_Seq_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size, uint32_t XferOptions) +{ + uint32_t xfermode; + uint32_t xferrequest = I2C_GENERATE_START_WRITE; + HAL_StatusTypeDef dmaxferstatus; + uint32_t sizetoxfer = 0U; + + /* Check the parameters */ + assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions)); + + if (hi2c->State == HAL_I2C_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY_TX; + hi2c->Mode = HAL_I2C_MODE_MASTER; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferOptions = XferOptions; + hi2c->XferISR = I2C_Master_ISR_DMA; + + /* If hi2c->XferCount > MAX_NBYTE_SIZE, use reload mode */ + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + xfermode = I2C_RELOAD_MODE; + } + else + { + hi2c->XferSize = hi2c->XferCount; + xfermode = hi2c->XferOptions; + } + + if ((hi2c->XferSize > 0U) && ((XferOptions == I2C_FIRST_FRAME) || \ + (XferOptions == I2C_FIRST_AND_LAST_FRAME))) + { + /* Preload TX register */ + /* Write data to TXDR */ + hi2c->Instance->TXDR = *hi2c->pBuffPtr; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + sizetoxfer = hi2c->XferSize; + hi2c->XferCount--; + hi2c->XferSize--; + } + + /* If transfer direction not change and there is no request to start another frame, + do not generate Restart Condition */ + /* Mean Previous state is same as current state */ + if ((hi2c->PreviousState == I2C_STATE_MASTER_BUSY_TX) && \ + (IS_I2C_TRANSFER_OTHER_OPTIONS_REQUEST(XferOptions) == 0)) + { + xferrequest = I2C_NO_STARTSTOP; + } + else + { + /* Convert OTHER_xxx XferOptions if any */ + I2C_ConvertOtherXferOptions(hi2c); + + /* Update xfermode accordingly if no reload is necessary */ + if (hi2c->XferCount <= MAX_NBYTE_SIZE) + { + xfermode = hi2c->XferOptions; + } + } + + if (hi2c->XferSize > 0U) + { + if (hi2c->hdmatx != NULL) + { + /* Set the I2C DMA transfer complete callback */ + hi2c->hdmatx->XferCpltCallback = I2C_DMAMasterTransmitCplt; + + /* Set the DMA error callback */ + hi2c->hdmatx->XferErrorCallback = I2C_DMAError; + + /* Set the unused DMA callbacks to NULL */ + hi2c->hdmatx->XferHalfCpltCallback = NULL; + hi2c->hdmatx->XferAbortCallback = NULL; + + /* Enable the DMA channel */ + dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)hi2c->pBuffPtr, + (uint32_t)&hi2c->Instance->TXDR, hi2c->XferSize); + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + if (dmaxferstatus == HAL_OK) + { + /* Send Slave Address and set NBYTES to write */ + if ((XferOptions == I2C_FIRST_FRAME) || (XferOptions == I2C_FIRST_AND_LAST_FRAME)) + { + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)sizetoxfer, xfermode, xferrequest); + } + else + { + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, xferrequest); + } + + /* Update XferCount value */ + hi2c->XferCount -= hi2c->XferSize; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* Enable ERR and NACK interrupts */ + I2C_Enable_IRQ(hi2c, I2C_XFER_ERROR_IT); + + /* Enable DMA Request */ + hi2c->Instance->CR1 |= I2C_CR1_TXDMAEN; + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + } + else + { + /* Update Transfer ISR function pointer */ + hi2c->XferISR = I2C_Master_ISR_IT; + + /* Send Slave Address */ + /* Set NBYTES to write and generate START condition */ + if ((XferOptions == I2C_FIRST_FRAME) || (XferOptions == I2C_FIRST_AND_LAST_FRAME)) + { + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)sizetoxfer, xfermode, xferrequest); + } + else + { + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, xferrequest); + } + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* Enable ERR, TC, STOP, NACK, TXI interrupt */ + /* possible to enable all of these */ + /* I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | + I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */ + I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT); + } + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Sequential receive in master I2C mode an amount of data in non-blocking mode with Interrupt + * @note This interface allow to manage repeated start condition when a direction change during transfer + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param XferOptions Options of Transfer, value of @ref I2C_XFEROPTIONS + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Master_Seq_Receive_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size, uint32_t XferOptions) +{ + uint32_t xfermode; + uint32_t xferrequest = I2C_GENERATE_START_READ; + + /* Check the parameters */ + assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions)); + + if (hi2c->State == HAL_I2C_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY_RX; + hi2c->Mode = HAL_I2C_MODE_MASTER; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferOptions = XferOptions; + hi2c->XferISR = I2C_Master_ISR_IT; + + /* If hi2c->XferCount > MAX_NBYTE_SIZE, use reload mode */ + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + xfermode = I2C_RELOAD_MODE; + } + else + { + hi2c->XferSize = hi2c->XferCount; + xfermode = hi2c->XferOptions; + } + + /* If transfer direction not change and there is no request to start another frame, + do not generate Restart Condition */ + /* Mean Previous state is same as current state */ + if ((hi2c->PreviousState == I2C_STATE_MASTER_BUSY_RX) && \ + (IS_I2C_TRANSFER_OTHER_OPTIONS_REQUEST(XferOptions) == 0)) + { + xferrequest = I2C_NO_STARTSTOP; + } + else + { + /* Convert OTHER_xxx XferOptions if any */ + I2C_ConvertOtherXferOptions(hi2c); + + /* Update xfermode accordingly if no reload is necessary */ + if (hi2c->XferCount <= MAX_NBYTE_SIZE) + { + xfermode = hi2c->XferOptions; + } + } + + /* Send Slave Address and set NBYTES to read */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, xferrequest); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + I2C_Enable_IRQ(hi2c, I2C_XFER_RX_IT); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Sequential receive in master I2C mode an amount of data in non-blocking mode with DMA + * @note This interface allow to manage repeated start condition when a direction change during transfer + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param XferOptions Options of Transfer, value of @ref I2C_XFEROPTIONS + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Master_Seq_Receive_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size, uint32_t XferOptions) +{ + uint32_t xfermode; + uint32_t xferrequest = I2C_GENERATE_START_READ; + HAL_StatusTypeDef dmaxferstatus; + + /* Check the parameters */ + assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions)); + + if (hi2c->State == HAL_I2C_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY_RX; + hi2c->Mode = HAL_I2C_MODE_MASTER; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferOptions = XferOptions; + hi2c->XferISR = I2C_Master_ISR_DMA; + + /* If hi2c->XferCount > MAX_NBYTE_SIZE, use reload mode */ + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + xfermode = I2C_RELOAD_MODE; + } + else + { + hi2c->XferSize = hi2c->XferCount; + xfermode = hi2c->XferOptions; + } + + /* If transfer direction not change and there is no request to start another frame, + do not generate Restart Condition */ + /* Mean Previous state is same as current state */ + if ((hi2c->PreviousState == I2C_STATE_MASTER_BUSY_RX) && \ + (IS_I2C_TRANSFER_OTHER_OPTIONS_REQUEST(XferOptions) == 0)) + { + xferrequest = I2C_NO_STARTSTOP; + } + else + { + /* Convert OTHER_xxx XferOptions if any */ + I2C_ConvertOtherXferOptions(hi2c); + + /* Update xfermode accordingly if no reload is necessary */ + if (hi2c->XferCount <= MAX_NBYTE_SIZE) + { + xfermode = hi2c->XferOptions; + } + } + + if (hi2c->XferSize > 0U) + { + if (hi2c->hdmarx != NULL) + { + /* Set the I2C DMA transfer complete callback */ + hi2c->hdmarx->XferCpltCallback = I2C_DMAMasterReceiveCplt; + + /* Set the DMA error callback */ + hi2c->hdmarx->XferErrorCallback = I2C_DMAError; + + /* Set the unused DMA callbacks to NULL */ + hi2c->hdmarx->XferHalfCpltCallback = NULL; + hi2c->hdmarx->XferAbortCallback = NULL; + + /* Enable the DMA channel */ + dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmarx, (uint32_t)&hi2c->Instance->RXDR, (uint32_t)pData, + hi2c->XferSize); + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + if (dmaxferstatus == HAL_OK) + { + /* Send Slave Address and set NBYTES to read */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, xferrequest); + + /* Update XferCount value */ + hi2c->XferCount -= hi2c->XferSize; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* Enable ERR and NACK interrupts */ + I2C_Enable_IRQ(hi2c, I2C_XFER_ERROR_IT); + + /* Enable DMA Request */ + hi2c->Instance->CR1 |= I2C_CR1_RXDMAEN; + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + } + else + { + /* Update Transfer ISR function pointer */ + hi2c->XferISR = I2C_Master_ISR_IT; + + /* Send Slave Address */ + /* Set NBYTES to read and generate START condition */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, + I2C_GENERATE_START_READ); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* Enable ERR, TC, STOP, NACK, RXI interrupt */ + /* possible to enable all of these */ + /* I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | + I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */ + I2C_Enable_IRQ(hi2c, I2C_XFER_RX_IT); + } + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Sequential transmit in slave/device I2C mode an amount of data in non-blocking mode with Interrupt + * @note This interface allow to manage repeated start condition when a direction change during transfer + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param XferOptions Options of Transfer, value of @ref I2C_XFEROPTIONS + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Slave_Seq_Transmit_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, + uint32_t XferOptions) +{ + /* Declaration of tmp to prevent undefined behavior of volatile usage */ + FlagStatus tmp; + + /* Check the parameters */ + assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions)); + + if (((uint32_t)hi2c->State & (uint32_t)HAL_I2C_STATE_LISTEN) == (uint32_t)HAL_I2C_STATE_LISTEN) + { + if ((pData == NULL) || (Size == 0U)) + { + hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; + return HAL_ERROR; + } + + /* Disable Interrupts, to prevent preemption during treatment in case of multicall */ + I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT | I2C_XFER_TX_IT); + + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* I2C cannot manage full duplex exchange so disable previous IT enabled if any */ + /* and then toggle the HAL slave RX state to TX state */ + if (hi2c->State == HAL_I2C_STATE_BUSY_RX_LISTEN) + { + /* Disable associated Interrupts */ + I2C_Disable_IRQ(hi2c, I2C_XFER_RX_IT); + + /* Abort DMA Xfer if any */ + if ((hi2c->Instance->CR1 & I2C_CR1_RXDMAEN) == I2C_CR1_RXDMAEN) + { + hi2c->Instance->CR1 &= ~I2C_CR1_RXDMAEN; + + if (hi2c->hdmarx != NULL) + { + /* Set the I2C DMA Abort callback : + will lead to call HAL_I2C_ErrorCallback() at end of DMA abort procedure */ + hi2c->hdmarx->XferAbortCallback = I2C_DMAAbort; + + /* Abort DMA RX */ + if (HAL_DMA_Abort_IT(hi2c->hdmarx) != HAL_OK) + { + /* Call Directly XferAbortCallback function in case of error */ + hi2c->hdmarx->XferAbortCallback(hi2c->hdmarx); + } + } + } + } + + hi2c->State = HAL_I2C_STATE_BUSY_TX_LISTEN; + hi2c->Mode = HAL_I2C_MODE_SLAVE; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Enable Address Acknowledge */ + hi2c->Instance->CR2 &= ~I2C_CR2_NACK; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferSize = hi2c->XferCount; + hi2c->XferOptions = XferOptions; + hi2c->XferISR = I2C_Slave_ISR_IT; + + tmp = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_ADDR); + if ((I2C_GET_DIR(hi2c) == I2C_DIRECTION_RECEIVE) && (tmp != RESET)) + { + /* Clear ADDR flag after prepare the transfer parameters */ + /* This action will generate an acknowledge to the Master */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR); + } + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* REnable ADDR interrupt */ + I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT | I2C_XFER_LISTEN_IT); + + return HAL_OK; + } + else + { + return HAL_ERROR; + } +} + +/** + * @brief Sequential transmit in slave/device I2C mode an amount of data in non-blocking mode with DMA + * @note This interface allow to manage repeated start condition when a direction change during transfer + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param XferOptions Options of Transfer, value of @ref I2C_XFEROPTIONS + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Slave_Seq_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, + uint32_t XferOptions) +{ + /* Declaration of tmp to prevent undefined behavior of volatile usage */ + FlagStatus tmp; + HAL_StatusTypeDef dmaxferstatus; + + /* Check the parameters */ + assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions)); + + if (((uint32_t)hi2c->State & (uint32_t)HAL_I2C_STATE_LISTEN) == (uint32_t)HAL_I2C_STATE_LISTEN) + { + if ((pData == NULL) || (Size == 0U)) + { + hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; + return HAL_ERROR; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* Disable Interrupts, to prevent preemption during treatment in case of multicall */ + I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT | I2C_XFER_TX_IT); + + /* I2C cannot manage full duplex exchange so disable previous IT enabled if any */ + /* and then toggle the HAL slave RX state to TX state */ + if (hi2c->State == HAL_I2C_STATE_BUSY_RX_LISTEN) + { + /* Disable associated Interrupts */ + I2C_Disable_IRQ(hi2c, I2C_XFER_RX_IT); + + if ((hi2c->Instance->CR1 & I2C_CR1_RXDMAEN) == I2C_CR1_RXDMAEN) + { + /* Abort DMA Xfer if any */ + if (hi2c->hdmarx != NULL) + { + hi2c->Instance->CR1 &= ~I2C_CR1_RXDMAEN; + + /* Set the I2C DMA Abort callback : + will lead to call HAL_I2C_ErrorCallback() at end of DMA abort procedure */ + hi2c->hdmarx->XferAbortCallback = I2C_DMAAbort; + + /* Abort DMA RX */ + if (HAL_DMA_Abort_IT(hi2c->hdmarx) != HAL_OK) + { + /* Call Directly XferAbortCallback function in case of error */ + hi2c->hdmarx->XferAbortCallback(hi2c->hdmarx); + } + } + } + } + else if (hi2c->State == HAL_I2C_STATE_BUSY_TX_LISTEN) + { + if ((hi2c->Instance->CR1 & I2C_CR1_TXDMAEN) == I2C_CR1_TXDMAEN) + { + hi2c->Instance->CR1 &= ~I2C_CR1_TXDMAEN; + + /* Abort DMA Xfer if any */ + if (hi2c->hdmatx != NULL) + { + /* Set the I2C DMA Abort callback : + will lead to call HAL_I2C_ErrorCallback() at end of DMA abort procedure */ + hi2c->hdmatx->XferAbortCallback = I2C_DMAAbort; + + /* Abort DMA TX */ + if (HAL_DMA_Abort_IT(hi2c->hdmatx) != HAL_OK) + { + /* Call Directly XferAbortCallback function in case of error */ + hi2c->hdmatx->XferAbortCallback(hi2c->hdmatx); + } + } + } + } + else + { + /* Nothing to do */ + } + + hi2c->State = HAL_I2C_STATE_BUSY_TX_LISTEN; + hi2c->Mode = HAL_I2C_MODE_SLAVE; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Enable Address Acknowledge */ + hi2c->Instance->CR2 &= ~I2C_CR2_NACK; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferSize = hi2c->XferCount; + hi2c->XferOptions = XferOptions; + hi2c->XferISR = I2C_Slave_ISR_DMA; + + if (hi2c->hdmatx != NULL) + { + /* Set the I2C DMA transfer complete callback */ + hi2c->hdmatx->XferCpltCallback = I2C_DMASlaveTransmitCplt; + + /* Set the DMA error callback */ + hi2c->hdmatx->XferErrorCallback = I2C_DMAError; + + /* Set the unused DMA callbacks to NULL */ + hi2c->hdmatx->XferHalfCpltCallback = NULL; + hi2c->hdmatx->XferAbortCallback = NULL; + + /* Enable the DMA channel */ + dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)pData, (uint32_t)&hi2c->Instance->TXDR, + hi2c->XferSize); + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_LISTEN; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + if (dmaxferstatus == HAL_OK) + { + /* Update XferCount value */ + hi2c->XferCount -= hi2c->XferSize; + + /* Reset XferSize */ + hi2c->XferSize = 0; + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_LISTEN; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + tmp = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_ADDR); + if ((I2C_GET_DIR(hi2c) == I2C_DIRECTION_RECEIVE) && (tmp != RESET)) + { + /* Clear ADDR flag after prepare the transfer parameters */ + /* This action will generate an acknowledge to the Master */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR); + } + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Enable DMA Request */ + hi2c->Instance->CR1 |= I2C_CR1_TXDMAEN; + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* Enable ERR, STOP, NACK, ADDR interrupts */ + I2C_Enable_IRQ(hi2c, I2C_XFER_LISTEN_IT); + + return HAL_OK; + } + else + { + return HAL_ERROR; + } +} + +/** + * @brief Sequential receive in slave/device I2C mode an amount of data in non-blocking mode with Interrupt + * @note This interface allow to manage repeated start condition when a direction change during transfer + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param XferOptions Options of Transfer, value of @ref I2C_XFEROPTIONS + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Slave_Seq_Receive_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, + uint32_t XferOptions) +{ + /* Declaration of tmp to prevent undefined behavior of volatile usage */ + FlagStatus tmp; + + /* Check the parameters */ + assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions)); + + if (((uint32_t)hi2c->State & (uint32_t)HAL_I2C_STATE_LISTEN) == (uint32_t)HAL_I2C_STATE_LISTEN) + { + if ((pData == NULL) || (Size == 0U)) + { + hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; + return HAL_ERROR; + } + + /* Disable Interrupts, to prevent preemption during treatment in case of multicall */ + I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT | I2C_XFER_RX_IT); + + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* I2C cannot manage full duplex exchange so disable previous IT enabled if any */ + /* and then toggle the HAL slave TX state to RX state */ + if (hi2c->State == HAL_I2C_STATE_BUSY_TX_LISTEN) + { + /* Disable associated Interrupts */ + I2C_Disable_IRQ(hi2c, I2C_XFER_TX_IT); + + if ((hi2c->Instance->CR1 & I2C_CR1_TXDMAEN) == I2C_CR1_TXDMAEN) + { + hi2c->Instance->CR1 &= ~I2C_CR1_TXDMAEN; + + /* Abort DMA Xfer if any */ + if (hi2c->hdmatx != NULL) + { + /* Set the I2C DMA Abort callback : + will lead to call HAL_I2C_ErrorCallback() at end of DMA abort procedure */ + hi2c->hdmatx->XferAbortCallback = I2C_DMAAbort; + + /* Abort DMA TX */ + if (HAL_DMA_Abort_IT(hi2c->hdmatx) != HAL_OK) + { + /* Call Directly XferAbortCallback function in case of error */ + hi2c->hdmatx->XferAbortCallback(hi2c->hdmatx); + } + } + } + } + + hi2c->State = HAL_I2C_STATE_BUSY_RX_LISTEN; + hi2c->Mode = HAL_I2C_MODE_SLAVE; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Enable Address Acknowledge */ + hi2c->Instance->CR2 &= ~I2C_CR2_NACK; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferSize = hi2c->XferCount; + hi2c->XferOptions = XferOptions; + hi2c->XferISR = I2C_Slave_ISR_IT; + + tmp = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_ADDR); + if ((I2C_GET_DIR(hi2c) == I2C_DIRECTION_TRANSMIT) && (tmp != RESET)) + { + /* Clear ADDR flag after prepare the transfer parameters */ + /* This action will generate an acknowledge to the Master */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR); + } + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* REnable ADDR interrupt */ + I2C_Enable_IRQ(hi2c, I2C_XFER_RX_IT | I2C_XFER_LISTEN_IT); + + return HAL_OK; + } + else + { + return HAL_ERROR; + } +} + +/** + * @brief Sequential receive in slave/device I2C mode an amount of data in non-blocking mode with DMA + * @note This interface allow to manage repeated start condition when a direction change during transfer + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param XferOptions Options of Transfer, value of @ref I2C_XFEROPTIONS + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Slave_Seq_Receive_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, + uint32_t XferOptions) +{ + /* Declaration of tmp to prevent undefined behavior of volatile usage */ + FlagStatus tmp; + HAL_StatusTypeDef dmaxferstatus; + + /* Check the parameters */ + assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions)); + + if (((uint32_t)hi2c->State & (uint32_t)HAL_I2C_STATE_LISTEN) == (uint32_t)HAL_I2C_STATE_LISTEN) + { + if ((pData == NULL) || (Size == 0U)) + { + hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; + return HAL_ERROR; + } + + /* Disable Interrupts, to prevent preemption during treatment in case of multicall */ + I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT | I2C_XFER_RX_IT); + + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* I2C cannot manage full duplex exchange so disable previous IT enabled if any */ + /* and then toggle the HAL slave TX state to RX state */ + if (hi2c->State == HAL_I2C_STATE_BUSY_TX_LISTEN) + { + /* Disable associated Interrupts */ + I2C_Disable_IRQ(hi2c, I2C_XFER_TX_IT); + + if ((hi2c->Instance->CR1 & I2C_CR1_TXDMAEN) == I2C_CR1_TXDMAEN) + { + /* Abort DMA Xfer if any */ + if (hi2c->hdmatx != NULL) + { + hi2c->Instance->CR1 &= ~I2C_CR1_TXDMAEN; + + /* Set the I2C DMA Abort callback : + will lead to call HAL_I2C_ErrorCallback() at end of DMA abort procedure */ + hi2c->hdmatx->XferAbortCallback = I2C_DMAAbort; + + /* Abort DMA TX */ + if (HAL_DMA_Abort_IT(hi2c->hdmatx) != HAL_OK) + { + /* Call Directly XferAbortCallback function in case of error */ + hi2c->hdmatx->XferAbortCallback(hi2c->hdmatx); + } + } + } + } + else if (hi2c->State == HAL_I2C_STATE_BUSY_RX_LISTEN) + { + if ((hi2c->Instance->CR1 & I2C_CR1_RXDMAEN) == I2C_CR1_RXDMAEN) + { + hi2c->Instance->CR1 &= ~I2C_CR1_RXDMAEN; + + /* Abort DMA Xfer if any */ + if (hi2c->hdmarx != NULL) + { + /* Set the I2C DMA Abort callback : + will lead to call HAL_I2C_ErrorCallback() at end of DMA abort procedure */ + hi2c->hdmarx->XferAbortCallback = I2C_DMAAbort; + + /* Abort DMA RX */ + if (HAL_DMA_Abort_IT(hi2c->hdmarx) != HAL_OK) + { + /* Call Directly XferAbortCallback function in case of error */ + hi2c->hdmarx->XferAbortCallback(hi2c->hdmarx); + } + } + } + } + else + { + /* Nothing to do */ + } + + hi2c->State = HAL_I2C_STATE_BUSY_RX_LISTEN; + hi2c->Mode = HAL_I2C_MODE_SLAVE; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Enable Address Acknowledge */ + hi2c->Instance->CR2 &= ~I2C_CR2_NACK; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferSize = hi2c->XferCount; + hi2c->XferOptions = XferOptions; + hi2c->XferISR = I2C_Slave_ISR_DMA; + + if (hi2c->hdmarx != NULL) + { + /* Set the I2C DMA transfer complete callback */ + hi2c->hdmarx->XferCpltCallback = I2C_DMASlaveReceiveCplt; + + /* Set the DMA error callback */ + hi2c->hdmarx->XferErrorCallback = I2C_DMAError; + + /* Set the unused DMA callbacks to NULL */ + hi2c->hdmarx->XferHalfCpltCallback = NULL; + hi2c->hdmarx->XferAbortCallback = NULL; + + /* Enable the DMA channel */ + dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmarx, (uint32_t)&hi2c->Instance->RXDR, + (uint32_t)pData, hi2c->XferSize); + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_LISTEN; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + if (dmaxferstatus == HAL_OK) + { + /* Update XferCount value */ + hi2c->XferCount -= hi2c->XferSize; + + /* Reset XferSize */ + hi2c->XferSize = 0; + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_LISTEN; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + tmp = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_ADDR); + if ((I2C_GET_DIR(hi2c) == I2C_DIRECTION_TRANSMIT) && (tmp != RESET)) + { + /* Clear ADDR flag after prepare the transfer parameters */ + /* This action will generate an acknowledge to the Master */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR); + } + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Enable DMA Request */ + hi2c->Instance->CR1 |= I2C_CR1_RXDMAEN; + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* REnable ADDR interrupt */ + I2C_Enable_IRQ(hi2c, I2C_XFER_RX_IT | I2C_XFER_LISTEN_IT); + + return HAL_OK; + } + else + { + return HAL_ERROR; + } +} + +/** + * @brief Enable the Address listen mode with Interrupt. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_EnableListen_IT(I2C_HandleTypeDef *hi2c) +{ + if (hi2c->State == HAL_I2C_STATE_READY) + { + hi2c->State = HAL_I2C_STATE_LISTEN; + hi2c->XferISR = I2C_Slave_ISR_IT; + + /* Enable the Address Match interrupt */ + I2C_Enable_IRQ(hi2c, I2C_XFER_LISTEN_IT); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Disable the Address listen mode with Interrupt. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_DisableListen_IT(I2C_HandleTypeDef *hi2c) +{ + /* Declaration of tmp to prevent undefined behavior of volatile usage */ + uint32_t tmp; + + /* Disable Address listen mode only if a transfer is not ongoing */ + if (hi2c->State == HAL_I2C_STATE_LISTEN) + { + tmp = (uint32_t)(hi2c->State) & I2C_STATE_MSK; + hi2c->PreviousState = tmp | (uint32_t)(hi2c->Mode); + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + hi2c->XferISR = NULL; + + /* Disable the Address Match interrupt */ + I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Abort a master or memory I2C IT or DMA process communication with Interrupt. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Master_Abort_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress) +{ + HAL_I2C_ModeTypeDef tmp_mode = hi2c->Mode; + + if ((tmp_mode == HAL_I2C_MODE_MASTER) || (tmp_mode == HAL_I2C_MODE_MEM)) + { + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* Disable Interrupts and Store Previous state */ + if (hi2c->State == HAL_I2C_STATE_BUSY_TX) + { + I2C_Disable_IRQ(hi2c, I2C_XFER_TX_IT); + hi2c->PreviousState = I2C_STATE_MASTER_BUSY_TX; + } + else if (hi2c->State == HAL_I2C_STATE_BUSY_RX) + { + I2C_Disable_IRQ(hi2c, I2C_XFER_RX_IT); + hi2c->PreviousState = I2C_STATE_MASTER_BUSY_RX; + } + else + { + /* Do nothing */ + } + + /* Set State at HAL_I2C_STATE_ABORT */ + hi2c->State = HAL_I2C_STATE_ABORT; + + /* Set NBYTES to 1 to generate a dummy read on I2C peripheral */ + /* Set AUTOEND mode, this will generate a NACK then STOP condition to abort the current transfer */ + I2C_TransferConfig(hi2c, DevAddress, 1, I2C_AUTOEND_MODE, I2C_GENERATE_STOP); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + I2C_Enable_IRQ(hi2c, I2C_XFER_CPLT_IT); + + return HAL_OK; + } + else + { + /* Wrong usage of abort function */ + /* This function should be used only in case of abort monitored by master device */ + return HAL_ERROR; + } +} + +/** + * @} + */ + +/** @defgroup I2C_IRQ_Handler_and_Callbacks IRQ Handler and Callbacks + * @{ + */ + +/** + * @brief This function handles I2C event interrupt request. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval None + */ +void HAL_I2C_EV_IRQHandler(I2C_HandleTypeDef *hi2c) /* Derogation MISRAC2012-Rule-8.13 */ +{ + /* Get current IT Flags and IT sources value */ + uint32_t itflags = READ_REG(hi2c->Instance->ISR); + uint32_t itsources = READ_REG(hi2c->Instance->CR1); + + /* I2C events treatment -------------------------------------*/ + if (hi2c->XferISR != NULL) + { + hi2c->XferISR(hi2c, itflags, itsources); + } +} + +/** + * @brief This function handles I2C error interrupt request. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval None + */ +void HAL_I2C_ER_IRQHandler(I2C_HandleTypeDef *hi2c) +{ + uint32_t itflags = READ_REG(hi2c->Instance->ISR); + uint32_t itsources = READ_REG(hi2c->Instance->CR1); + uint32_t tmperror; + + /* I2C Bus error interrupt occurred ------------------------------------*/ + if ((I2C_CHECK_FLAG(itflags, I2C_FLAG_BERR) != RESET) && \ + (I2C_CHECK_IT_SOURCE(itsources, I2C_IT_ERRI) != RESET)) + { + hi2c->ErrorCode |= HAL_I2C_ERROR_BERR; + + /* Clear BERR flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_BERR); + } + + /* I2C Over-Run/Under-Run interrupt occurred ----------------------------------------*/ + if ((I2C_CHECK_FLAG(itflags, I2C_FLAG_OVR) != RESET) && \ + (I2C_CHECK_IT_SOURCE(itsources, I2C_IT_ERRI) != RESET)) + { + hi2c->ErrorCode |= HAL_I2C_ERROR_OVR; + + /* Clear OVR flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_OVR); + } + + /* I2C Arbitration Loss error interrupt occurred -------------------------------------*/ + if ((I2C_CHECK_FLAG(itflags, I2C_FLAG_ARLO) != RESET) && \ + (I2C_CHECK_IT_SOURCE(itsources, I2C_IT_ERRI) != RESET)) + { + hi2c->ErrorCode |= HAL_I2C_ERROR_ARLO; + + /* Clear ARLO flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ARLO); + } + + /* Store current volatile hi2c->ErrorCode, misra rule */ + tmperror = hi2c->ErrorCode; + + /* Call the Error Callback in case of Error detected */ + if ((tmperror & (HAL_I2C_ERROR_BERR | HAL_I2C_ERROR_OVR | HAL_I2C_ERROR_ARLO)) != HAL_I2C_ERROR_NONE) + { + I2C_ITError(hi2c, tmperror); + } +} + +/** + * @brief Master Tx Transfer completed callback. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval None + */ +__weak void HAL_I2C_MasterTxCpltCallback(I2C_HandleTypeDef *hi2c) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2c); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_I2C_MasterTxCpltCallback could be implemented in the user file + */ +} + +/** + * @brief Master Rx Transfer completed callback. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval None + */ +__weak void HAL_I2C_MasterRxCpltCallback(I2C_HandleTypeDef *hi2c) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2c); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_I2C_MasterRxCpltCallback could be implemented in the user file + */ +} + +/** @brief Slave Tx Transfer completed callback. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval None + */ +__weak void HAL_I2C_SlaveTxCpltCallback(I2C_HandleTypeDef *hi2c) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2c); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_I2C_SlaveTxCpltCallback could be implemented in the user file + */ +} + +/** + * @brief Slave Rx Transfer completed callback. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval None + */ +__weak void HAL_I2C_SlaveRxCpltCallback(I2C_HandleTypeDef *hi2c) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2c); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_I2C_SlaveRxCpltCallback could be implemented in the user file + */ +} + +/** + * @brief Slave Address Match callback. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param TransferDirection Master request Transfer Direction (Write/Read), value of @ref I2C_XFERDIRECTION + * @param AddrMatchCode Address Match Code + * @retval None + */ +__weak void HAL_I2C_AddrCallback(I2C_HandleTypeDef *hi2c, uint8_t TransferDirection, uint16_t AddrMatchCode) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2c); + UNUSED(TransferDirection); + UNUSED(AddrMatchCode); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_I2C_AddrCallback() could be implemented in the user file + */ +} + +/** + * @brief Listen Complete callback. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval None + */ +__weak void HAL_I2C_ListenCpltCallback(I2C_HandleTypeDef *hi2c) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2c); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_I2C_ListenCpltCallback() could be implemented in the user file + */ +} + +/** + * @brief Memory Tx Transfer completed callback. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval None + */ +__weak void HAL_I2C_MemTxCpltCallback(I2C_HandleTypeDef *hi2c) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2c); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_I2C_MemTxCpltCallback could be implemented in the user file + */ +} + +/** + * @brief Memory Rx Transfer completed callback. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval None + */ +__weak void HAL_I2C_MemRxCpltCallback(I2C_HandleTypeDef *hi2c) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2c); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_I2C_MemRxCpltCallback could be implemented in the user file + */ +} + +/** + * @brief I2C error callback. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval None + */ +__weak void HAL_I2C_ErrorCallback(I2C_HandleTypeDef *hi2c) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2c); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_I2C_ErrorCallback could be implemented in the user file + */ +} + +/** + * @brief I2C abort callback. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval None + */ +__weak void HAL_I2C_AbortCpltCallback(I2C_HandleTypeDef *hi2c) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2c); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_I2C_AbortCpltCallback could be implemented in the user file + */ +} + +/** + * @} + */ + +/** @defgroup I2C_Exported_Functions_Group3 Peripheral State, Mode and Error functions + * @brief Peripheral State, Mode and Error functions + * +@verbatim + =============================================================================== + ##### Peripheral State, Mode and Error functions ##### + =============================================================================== + [..] + This subsection permit to get in run-time the status of the peripheral + and the data flow. + +@endverbatim + * @{ + */ + +/** + * @brief Return the I2C handle state. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval HAL state + */ +HAL_I2C_StateTypeDef HAL_I2C_GetState(const I2C_HandleTypeDef *hi2c) +{ + /* Return I2C handle state */ + return hi2c->State; +} + +/** + * @brief Returns the I2C Master, Slave, Memory or no mode. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for I2C module + * @retval HAL mode + */ +HAL_I2C_ModeTypeDef HAL_I2C_GetMode(const I2C_HandleTypeDef *hi2c) +{ + return hi2c->Mode; +} + +/** + * @brief Return the I2C error code. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval I2C Error Code + */ +uint32_t HAL_I2C_GetError(const I2C_HandleTypeDef *hi2c) +{ + return hi2c->ErrorCode; +} + +/** + * @} + */ + +/** + * @} + */ + +/** @addtogroup I2C_Private_Functions + * @{ + */ + +/** + * @brief Interrupt Sub-Routine which handle the Interrupt Flags Master Mode with Interrupt. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param ITFlags Interrupt flags to handle. + * @param ITSources Interrupt sources enabled. + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_Master_ISR_IT(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, + uint32_t ITSources) +{ + uint16_t devaddress; + uint32_t tmpITFlags = ITFlags; + + /* Process Locked */ + __HAL_LOCK(hi2c); + + if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_AF) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_NACKI) != RESET)) + { + /* Clear NACK Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + + /* Set corresponding Error Code */ + /* No need to generate STOP, it is automatically done */ + /* Error callback will be send during stop flag treatment */ + hi2c->ErrorCode |= HAL_I2C_ERROR_AF; + + /* Flush TX register */ + I2C_Flush_TXDR(hi2c); + } + else if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_RXNE) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_RXI) != RESET)) + { + /* Remove RXNE flag on temporary variable as read done */ + tmpITFlags &= ~I2C_FLAG_RXNE; + + /* Read data from RXDR */ + *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->RXDR; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + hi2c->XferSize--; + hi2c->XferCount--; + } + else if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_TC) == RESET) && \ + ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_TXIS) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_TXI) != RESET))) + { + /* Write data to TXDR */ + if (hi2c->XferCount != 0U) + { + /* Write data to TXDR */ + hi2c->Instance->TXDR = *hi2c->pBuffPtr; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + hi2c->XferSize--; + hi2c->XferCount--; + } + } + else if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_TCR) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_TCI) != RESET)) + { + if ((hi2c->XferCount != 0U) && (hi2c->XferSize == 0U)) + { + devaddress = (uint16_t)(hi2c->Instance->CR2 & I2C_CR2_SADD); + + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + /* Errata workaround 170323 */ + if (I2C_GET_DIR(hi2c) == I2C_DIRECTION_RECEIVE) + { + hi2c->XferSize = 1U; + } + else + { + hi2c->XferSize = MAX_NBYTE_SIZE; + } + I2C_TransferConfig(hi2c, devaddress, (uint8_t)hi2c->XferSize, I2C_RELOAD_MODE, I2C_NO_STARTSTOP); + } + else + { + hi2c->XferSize = hi2c->XferCount; + if (hi2c->XferOptions != I2C_NO_OPTION_FRAME) + { + I2C_TransferConfig(hi2c, devaddress, (uint8_t)hi2c->XferSize, + hi2c->XferOptions, I2C_NO_STARTSTOP); + } + else + { + I2C_TransferConfig(hi2c, devaddress, (uint8_t)hi2c->XferSize, + I2C_AUTOEND_MODE, I2C_NO_STARTSTOP); + } + } + } + else + { + /* Call TxCpltCallback() if no stop mode is set */ + if (I2C_GET_STOP_MODE(hi2c) != I2C_AUTOEND_MODE) + { + /* Call I2C Master Sequential complete process */ + I2C_ITMasterSeqCplt(hi2c); + } + else + { + /* Wrong size Status regarding TCR flag event */ + /* Call the corresponding callback to inform upper layer of End of Transfer */ + I2C_ITError(hi2c, HAL_I2C_ERROR_SIZE); + } + } + } + else if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_TC) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_TCI) != RESET)) + { + if (hi2c->XferCount == 0U) + { + if (I2C_GET_STOP_MODE(hi2c) != I2C_AUTOEND_MODE) + { + /* Generate a stop condition in case of no transfer option */ + if (hi2c->XferOptions == I2C_NO_OPTION_FRAME) + { + /* Generate Stop */ + hi2c->Instance->CR2 |= I2C_CR2_STOP; + } + else + { + /* Call I2C Master Sequential complete process */ + I2C_ITMasterSeqCplt(hi2c); + } + } + } + else + { + /* Wrong size Status regarding TC flag event */ + /* Call the corresponding callback to inform upper layer of End of Transfer */ + I2C_ITError(hi2c, HAL_I2C_ERROR_SIZE); + } + } + else + { + /* Nothing to do */ + } + + if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_STOPF) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_STOPI) != RESET)) + { + /* Call I2C Master complete process */ + I2C_ITMasterCplt(hi2c, tmpITFlags); + } + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; +} + +/** + * @brief Interrupt Sub-Routine which handle the Interrupt Flags Memory Mode with Interrupt. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param ITFlags Interrupt flags to handle. + * @param ITSources Interrupt sources enabled. + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_Mem_ISR_IT(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, + uint32_t ITSources) +{ + uint32_t direction = I2C_GENERATE_START_WRITE; + uint32_t tmpITFlags = ITFlags; + + /* Process Locked */ + __HAL_LOCK(hi2c); + + if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_AF) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_NACKI) != RESET)) + { + /* Clear NACK Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + + /* Set corresponding Error Code */ + /* No need to generate STOP, it is automatically done */ + /* Error callback will be send during stop flag treatment */ + hi2c->ErrorCode |= HAL_I2C_ERROR_AF; + + /* Flush TX register */ + I2C_Flush_TXDR(hi2c); + } + else if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_RXNE) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_RXI) != RESET)) + { + /* Remove RXNE flag on temporary variable as read done */ + tmpITFlags &= ~I2C_FLAG_RXNE; + + /* Read data from RXDR */ + *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->RXDR; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + hi2c->XferSize--; + hi2c->XferCount--; + } + else if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_TXIS) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_TXI) != RESET)) + { + if (hi2c->Memaddress == 0xFFFFFFFFU) + { + /* Write data to TXDR */ + hi2c->Instance->TXDR = *hi2c->pBuffPtr; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + hi2c->XferSize--; + hi2c->XferCount--; + } + else + { + /* Write LSB part of Memory Address */ + hi2c->Instance->TXDR = hi2c->Memaddress; + + /* Reset Memaddress content */ + hi2c->Memaddress = 0xFFFFFFFFU; + } + } + else if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_TCR) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_TCI) != RESET)) + { + if ((hi2c->XferCount != 0U) && (hi2c->XferSize == 0U)) + { + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + /* Errata workaround 170323 */ + if (I2C_GET_DIR(hi2c) == I2C_DIRECTION_RECEIVE) + { + hi2c->XferSize = 1U; + } + else + { + hi2c->XferSize = MAX_NBYTE_SIZE; + } + I2C_TransferConfig(hi2c, (uint16_t)hi2c->Devaddress, (uint8_t)hi2c->XferSize, + I2C_RELOAD_MODE, I2C_NO_STARTSTOP); + } + else + { + hi2c->XferSize = hi2c->XferCount; + I2C_TransferConfig(hi2c, (uint16_t)hi2c->Devaddress, (uint8_t)hi2c->XferSize, + I2C_AUTOEND_MODE, I2C_NO_STARTSTOP); + } + } + else + { + /* Wrong size Status regarding TCR flag event */ + /* Call the corresponding callback to inform upper layer of End of Transfer */ + I2C_ITError(hi2c, HAL_I2C_ERROR_SIZE); + } + } + else if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_TC) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_TCI) != RESET)) + { + /* Disable Interrupt related to address step */ + I2C_Disable_IRQ(hi2c, I2C_XFER_TX_IT); + + /* Enable ERR, TC, STOP, NACK and RXI interrupts */ + I2C_Enable_IRQ(hi2c, I2C_XFER_RX_IT); + + if (hi2c->State == HAL_I2C_STATE_BUSY_RX) + { + direction = I2C_GENERATE_START_READ; + } + + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + /* Errata workaround 170323 */ + if (I2C_GET_DIR(hi2c) == I2C_DIRECTION_RECEIVE) + { + hi2c->XferSize = 1U; + } + else + { + hi2c->XferSize = MAX_NBYTE_SIZE; + } + + /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */ + I2C_TransferConfig(hi2c, (uint16_t)hi2c->Devaddress, (uint8_t)hi2c->XferSize, + I2C_RELOAD_MODE, direction); + } + else + { + hi2c->XferSize = hi2c->XferCount; + + /* Set NBYTES to write and generate RESTART */ + I2C_TransferConfig(hi2c, (uint16_t)hi2c->Devaddress, (uint8_t)hi2c->XferSize, + I2C_AUTOEND_MODE, direction); + } + } + else + { + /* Nothing to do */ + } + + if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_STOPF) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_STOPI) != RESET)) + { + /* Call I2C Master complete process */ + I2C_ITMasterCplt(hi2c, tmpITFlags); + } + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; +} + +/** + * @brief Interrupt Sub-Routine which handle the Interrupt Flags Slave Mode with Interrupt. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param ITFlags Interrupt flags to handle. + * @param ITSources Interrupt sources enabled. + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_Slave_ISR_IT(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, + uint32_t ITSources) +{ + uint32_t tmpoptions = hi2c->XferOptions; + uint32_t tmpITFlags = ITFlags; + + /* Process locked */ + __HAL_LOCK(hi2c); + + /* Check if STOPF is set */ + if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_STOPF) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_STOPI) != RESET)) + { + /* Call I2C Slave complete process */ + I2C_ITSlaveCplt(hi2c, tmpITFlags); + } + else if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_AF) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_NACKI) != RESET)) + { + /* Check that I2C transfer finished */ + /* if yes, normal use case, a NACK is sent by the MASTER when Transfer is finished */ + /* Mean XferCount == 0*/ + /* So clear Flag NACKF only */ + if (hi2c->XferCount == 0U) + { + if ((hi2c->State == HAL_I2C_STATE_LISTEN) && (tmpoptions == I2C_FIRST_AND_LAST_FRAME)) + /* Same action must be done for (tmpoptions == I2C_LAST_FRAME) which removed for + Warning[Pa134]: left and right operands are identical */ + { + /* Call I2C Listen complete process */ + I2C_ITListenCplt(hi2c, tmpITFlags); + } + else if ((hi2c->State == HAL_I2C_STATE_BUSY_TX_LISTEN) && (tmpoptions != I2C_NO_OPTION_FRAME)) + { + /* Clear NACK Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + + /* Flush TX register */ + I2C_Flush_TXDR(hi2c); + + /* Last Byte is Transmitted */ + /* Call I2C Slave Sequential complete process */ + I2C_ITSlaveSeqCplt(hi2c); + } + else + { + /* Clear NACK Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + } + } + else + { + /* if no, error use case, a Non-Acknowledge of last Data is generated by the MASTER*/ + /* Clear NACK Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + + /* Set ErrorCode corresponding to a Non-Acknowledge */ + hi2c->ErrorCode |= HAL_I2C_ERROR_AF; + + if ((tmpoptions == I2C_FIRST_FRAME) || (tmpoptions == I2C_NEXT_FRAME)) + { + /* Call the corresponding callback to inform upper layer of End of Transfer */ + I2C_ITError(hi2c, hi2c->ErrorCode); + } + } + } + else if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_RXNE) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_RXI) != RESET)) + { + if (hi2c->XferCount > 0U) + { + /* Read data from RXDR */ + *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->RXDR; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + hi2c->XferSize--; + hi2c->XferCount--; + } + + if ((hi2c->XferCount == 0U) && \ + (tmpoptions != I2C_NO_OPTION_FRAME)) + { + /* Call I2C Slave Sequential complete process */ + I2C_ITSlaveSeqCplt(hi2c); + } + } + else if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_ADDR) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_ADDRI) != RESET)) + { + I2C_ITAddrCplt(hi2c, tmpITFlags); + } + else if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_TXIS) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_TXI) != RESET)) + { + /* Write data to TXDR only if XferCount not reach "0" */ + /* A TXIS flag can be set, during STOP treatment */ + /* Check if all Data have already been sent */ + /* If it is the case, this last write in TXDR is not sent, correspond to a dummy TXIS event */ + if (hi2c->XferCount > 0U) + { + /* Write data to TXDR */ + hi2c->Instance->TXDR = *hi2c->pBuffPtr; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + hi2c->XferCount--; + hi2c->XferSize--; + } + else + { + if ((tmpoptions == I2C_NEXT_FRAME) || (tmpoptions == I2C_FIRST_FRAME)) + { + /* Last Byte is Transmitted */ + /* Call I2C Slave Sequential complete process */ + I2C_ITSlaveSeqCplt(hi2c); + } + } + } + else + { + /* Nothing to do */ + } + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; +} + +/** + * @brief Interrupt Sub-Routine which handle the Interrupt Flags Master Mode with DMA. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param ITFlags Interrupt flags to handle. + * @param ITSources Interrupt sources enabled. + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_Master_ISR_DMA(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, + uint32_t ITSources) +{ + uint16_t devaddress; + uint32_t xfermode; + + /* Process Locked */ + __HAL_LOCK(hi2c); + + if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_AF) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_NACKI) != RESET)) + { + /* Clear NACK Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + + /* Set corresponding Error Code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_AF; + + /* No need to generate STOP, it is automatically done */ + /* But enable STOP interrupt, to treat it */ + /* Error callback will be send during stop flag treatment */ + I2C_Enable_IRQ(hi2c, I2C_XFER_CPLT_IT); + + /* Flush TX register */ + I2C_Flush_TXDR(hi2c); + } + else if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_TCR) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_TCI) != RESET)) + { + /* Disable TC interrupt */ + __HAL_I2C_DISABLE_IT(hi2c, I2C_IT_TCI); + + if (hi2c->XferCount != 0U) + { + /* Recover Slave address */ + devaddress = (uint16_t)(hi2c->Instance->CR2 & I2C_CR2_SADD); + + /* Prepare the new XferSize to transfer */ + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + /* Errata workaround 170323 */ + if (I2C_GET_DIR(hi2c) == I2C_DIRECTION_RECEIVE) + { + hi2c->XferSize = 1U; + } + else + { + hi2c->XferSize = MAX_NBYTE_SIZE; + } + xfermode = I2C_RELOAD_MODE; + } + else + { + hi2c->XferSize = hi2c->XferCount; + if (hi2c->XferOptions != I2C_NO_OPTION_FRAME) + { + xfermode = hi2c->XferOptions; + } + else + { + xfermode = I2C_AUTOEND_MODE; + } + } + + /* Set the new XferSize in Nbytes register */ + I2C_TransferConfig(hi2c, devaddress, (uint8_t)hi2c->XferSize, xfermode, I2C_NO_STARTSTOP); + + /* Update XferCount value */ + hi2c->XferCount -= hi2c->XferSize; + + /* Enable DMA Request */ + if (hi2c->State == HAL_I2C_STATE_BUSY_RX) + { + hi2c->Instance->CR1 |= I2C_CR1_RXDMAEN; + } + else + { + hi2c->Instance->CR1 |= I2C_CR1_TXDMAEN; + } + } + else + { + /* Call TxCpltCallback() if no stop mode is set */ + if (I2C_GET_STOP_MODE(hi2c) != I2C_AUTOEND_MODE) + { + /* Call I2C Master Sequential complete process */ + I2C_ITMasterSeqCplt(hi2c); + } + else + { + /* Wrong size Status regarding TCR flag event */ + /* Call the corresponding callback to inform upper layer of End of Transfer */ + I2C_ITError(hi2c, HAL_I2C_ERROR_SIZE); + } + } + } + else if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_TC) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_TCI) != RESET)) + { + if (hi2c->XferCount == 0U) + { + if (I2C_GET_STOP_MODE(hi2c) != I2C_AUTOEND_MODE) + { + /* Generate a stop condition in case of no transfer option */ + if (hi2c->XferOptions == I2C_NO_OPTION_FRAME) + { + /* Generate Stop */ + hi2c->Instance->CR2 |= I2C_CR2_STOP; + } + else + { + /* Call I2C Master Sequential complete process */ + I2C_ITMasterSeqCplt(hi2c); + } + } + } + else + { + /* Wrong size Status regarding TC flag event */ + /* Call the corresponding callback to inform upper layer of End of Transfer */ + I2C_ITError(hi2c, HAL_I2C_ERROR_SIZE); + } + } + else if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_STOPF) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_STOPI) != RESET)) + { + /* Call I2C Master complete process */ + I2C_ITMasterCplt(hi2c, ITFlags); + } + else + { + /* Nothing to do */ + } + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; +} + +/** + * @brief Interrupt Sub-Routine which handle the Interrupt Flags Memory Mode with DMA. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param ITFlags Interrupt flags to handle. + * @param ITSources Interrupt sources enabled. + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_Mem_ISR_DMA(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, + uint32_t ITSources) +{ + uint32_t direction = I2C_GENERATE_START_WRITE; + + /* Process Locked */ + __HAL_LOCK(hi2c); + + if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_AF) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_NACKI) != RESET)) + { + /* Clear NACK Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + + /* Set corresponding Error Code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_AF; + + /* No need to generate STOP, it is automatically done */ + /* But enable STOP interrupt, to treat it */ + /* Error callback will be send during stop flag treatment */ + I2C_Enable_IRQ(hi2c, I2C_XFER_CPLT_IT); + + /* Flush TX register */ + I2C_Flush_TXDR(hi2c); + } + else if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_TXIS) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_TXI) != RESET)) + { + /* Write LSB part of Memory Address */ + hi2c->Instance->TXDR = hi2c->Memaddress; + + /* Reset Memaddress content */ + hi2c->Memaddress = 0xFFFFFFFFU; + } + else if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_TCR) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_TCI) != RESET)) + { + /* Disable Interrupt related to address step */ + I2C_Disable_IRQ(hi2c, I2C_XFER_TX_IT); + + /* Enable only Error interrupt */ + I2C_Enable_IRQ(hi2c, I2C_XFER_ERROR_IT); + + if (hi2c->XferCount != 0U) + { + /* Prepare the new XferSize to transfer */ + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + /* Errata workaround 170323 */ + if (I2C_GET_DIR(hi2c) == I2C_DIRECTION_RECEIVE) + { + hi2c->XferSize = 1U; + } + else + { + hi2c->XferSize = MAX_NBYTE_SIZE; + } + I2C_TransferConfig(hi2c, (uint16_t)hi2c->Devaddress, (uint8_t)hi2c->XferSize, + I2C_RELOAD_MODE, I2C_NO_STARTSTOP); + } + else + { + hi2c->XferSize = hi2c->XferCount; + I2C_TransferConfig(hi2c, (uint16_t)hi2c->Devaddress, (uint8_t)hi2c->XferSize, + I2C_AUTOEND_MODE, I2C_NO_STARTSTOP); + } + + /* Update XferCount value */ + hi2c->XferCount -= hi2c->XferSize; + + /* Enable DMA Request */ + if (hi2c->State == HAL_I2C_STATE_BUSY_RX) + { + hi2c->Instance->CR1 |= I2C_CR1_RXDMAEN; + } + else + { + hi2c->Instance->CR1 |= I2C_CR1_TXDMAEN; + } + } + else + { + /* Wrong size Status regarding TCR flag event */ + /* Call the corresponding callback to inform upper layer of End of Transfer */ + I2C_ITError(hi2c, HAL_I2C_ERROR_SIZE); + } + } + else if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_TC) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_TCI) != RESET)) + { + /* Disable Interrupt related to address step */ + I2C_Disable_IRQ(hi2c, I2C_XFER_TX_IT); + + /* Enable only Error and NACK interrupt for data transfer */ + I2C_Enable_IRQ(hi2c, I2C_XFER_ERROR_IT); + + if (hi2c->State == HAL_I2C_STATE_BUSY_RX) + { + direction = I2C_GENERATE_START_READ; + } + + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + /* Errata workaround 170323 */ + if (I2C_GET_DIR(hi2c) == I2C_DIRECTION_RECEIVE) + { + hi2c->XferSize = 1U; + } + else + { + hi2c->XferSize = MAX_NBYTE_SIZE; + } + + /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */ + I2C_TransferConfig(hi2c, (uint16_t)hi2c->Devaddress, (uint8_t)hi2c->XferSize, + I2C_RELOAD_MODE, direction); + } + else + { + hi2c->XferSize = hi2c->XferCount; + + /* Set NBYTES to write and generate RESTART */ + I2C_TransferConfig(hi2c, (uint16_t)hi2c->Devaddress, (uint8_t)hi2c->XferSize, + I2C_AUTOEND_MODE, direction); + } + + /* Update XferCount value */ + hi2c->XferCount -= hi2c->XferSize; + + /* Enable DMA Request */ + if (hi2c->State == HAL_I2C_STATE_BUSY_RX) + { + hi2c->Instance->CR1 |= I2C_CR1_RXDMAEN; + } + else + { + hi2c->Instance->CR1 |= I2C_CR1_TXDMAEN; + } + } + else if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_STOPF) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_STOPI) != RESET)) + { + /* Call I2C Master complete process */ + I2C_ITMasterCplt(hi2c, ITFlags); + } + else + { + /* Nothing to do */ + } + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; +} + +/** + * @brief Interrupt Sub-Routine which handle the Interrupt Flags Slave Mode with DMA. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param ITFlags Interrupt flags to handle. + * @param ITSources Interrupt sources enabled. + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_Slave_ISR_DMA(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, + uint32_t ITSources) +{ + uint32_t tmpoptions = hi2c->XferOptions; + uint32_t treatdmanack = 0U; + HAL_I2C_StateTypeDef tmpstate; + + /* Process locked */ + __HAL_LOCK(hi2c); + + /* Check if STOPF is set */ + if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_STOPF) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_STOPI) != RESET)) + { + /* Call I2C Slave complete process */ + I2C_ITSlaveCplt(hi2c, ITFlags); + } + else if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_AF) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_NACKI) != RESET)) + { + /* Check that I2C transfer finished */ + /* if yes, normal use case, a NACK is sent by the MASTER when Transfer is finished */ + /* Mean XferCount == 0 */ + /* So clear Flag NACKF only */ + if ((I2C_CHECK_IT_SOURCE(ITSources, I2C_CR1_TXDMAEN) != RESET) || + (I2C_CHECK_IT_SOURCE(ITSources, I2C_CR1_RXDMAEN) != RESET)) + { + /* Split check of hdmarx, for MISRA compliance */ + if (hi2c->hdmarx != NULL) + { + if (I2C_CHECK_IT_SOURCE(ITSources, I2C_CR1_RXDMAEN) != RESET) + { + if (I2C_GET_DMA_REMAIN_DATA(hi2c->hdmarx) == 0U) + { + treatdmanack = 1U; + } + } + } + + /* Split check of hdmatx, for MISRA compliance */ + if (hi2c->hdmatx != NULL) + { + if (I2C_CHECK_IT_SOURCE(ITSources, I2C_CR1_TXDMAEN) != RESET) + { + if (I2C_GET_DMA_REMAIN_DATA(hi2c->hdmatx) == 0U) + { + treatdmanack = 1U; + } + } + } + + if (treatdmanack == 1U) + { + if ((hi2c->State == HAL_I2C_STATE_LISTEN) && (tmpoptions == I2C_FIRST_AND_LAST_FRAME)) + /* Same action must be done for (tmpoptions == I2C_LAST_FRAME) which removed for + Warning[Pa134]: left and right operands are identical */ + { + /* Call I2C Listen complete process */ + I2C_ITListenCplt(hi2c, ITFlags); + } + else if ((hi2c->State == HAL_I2C_STATE_BUSY_TX_LISTEN) && (tmpoptions != I2C_NO_OPTION_FRAME)) + { + /* Clear NACK Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + + /* Flush TX register */ + I2C_Flush_TXDR(hi2c); + + /* Last Byte is Transmitted */ + /* Call I2C Slave Sequential complete process */ + I2C_ITSlaveSeqCplt(hi2c); + } + else + { + /* Clear NACK Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + } + } + else + { + /* if no, error use case, a Non-Acknowledge of last Data is generated by the MASTER*/ + /* Clear NACK Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + + /* Set ErrorCode corresponding to a Non-Acknowledge */ + hi2c->ErrorCode |= HAL_I2C_ERROR_AF; + + /* Store current hi2c->State, solve MISRA2012-Rule-13.5 */ + tmpstate = hi2c->State; + + if ((tmpoptions == I2C_FIRST_FRAME) || (tmpoptions == I2C_NEXT_FRAME)) + { + if ((tmpstate == HAL_I2C_STATE_BUSY_TX) || (tmpstate == HAL_I2C_STATE_BUSY_TX_LISTEN)) + { + hi2c->PreviousState = I2C_STATE_SLAVE_BUSY_TX; + } + else if ((tmpstate == HAL_I2C_STATE_BUSY_RX) || (tmpstate == HAL_I2C_STATE_BUSY_RX_LISTEN)) + { + hi2c->PreviousState = I2C_STATE_SLAVE_BUSY_RX; + } + else + { + /* Do nothing */ + } + + /* Call the corresponding callback to inform upper layer of End of Transfer */ + I2C_ITError(hi2c, hi2c->ErrorCode); + } + } + } + else + { + /* Only Clear NACK Flag, no DMA treatment is pending */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + } + } + else if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_ADDR) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_ADDRI) != RESET)) + { + I2C_ITAddrCplt(hi2c, ITFlags); + } + else + { + /* Nothing to do */ + } + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; +} + +/** + * @brief Master sends target device address followed by internal memory address for write request. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param MemAddress Internal memory address + * @param MemAddSize Size of internal memory address + * @param Timeout Timeout duration + * @param Tickstart Tick start value + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_RequestMemoryWrite(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, + uint16_t MemAddress, uint16_t MemAddSize, uint32_t Timeout, + uint32_t Tickstart) +{ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)MemAddSize, I2C_RELOAD_MODE, I2C_GENERATE_START_WRITE); + + /* Wait until TXIS flag is set */ + if (I2C_WaitOnTXISFlagUntilTimeout(hi2c, Timeout, Tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* If Memory address size is 8Bit */ + if (MemAddSize == I2C_MEMADD_SIZE_8BIT) + { + /* Send Memory Address */ + hi2c->Instance->TXDR = I2C_MEM_ADD_LSB(MemAddress); + } + /* If Memory address size is 16Bit */ + else + { + /* Send MSB of Memory Address */ + hi2c->Instance->TXDR = I2C_MEM_ADD_MSB(MemAddress); + + /* Wait until TXIS flag is set */ + if (I2C_WaitOnTXISFlagUntilTimeout(hi2c, Timeout, Tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Send LSB of Memory Address */ + hi2c->Instance->TXDR = I2C_MEM_ADD_LSB(MemAddress); + } + + /* Wait until TCR flag is set */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TCR, RESET, Timeout, Tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + return HAL_OK; +} + +/** + * @brief Master sends target device address followed by internal memory address for read request. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param MemAddress Internal memory address + * @param MemAddSize Size of internal memory address + * @param Timeout Timeout duration + * @param Tickstart Tick start value + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_RequestMemoryRead(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, + uint16_t MemAddress, uint16_t MemAddSize, uint32_t Timeout, + uint32_t Tickstart) +{ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)MemAddSize, I2C_SOFTEND_MODE, I2C_GENERATE_START_WRITE); + + /* Wait until TXIS flag is set */ + if (I2C_WaitOnTXISFlagUntilTimeout(hi2c, Timeout, Tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* If Memory address size is 8Bit */ + if (MemAddSize == I2C_MEMADD_SIZE_8BIT) + { + /* Send Memory Address */ + hi2c->Instance->TXDR = I2C_MEM_ADD_LSB(MemAddress); + } + /* If Memory address size is 16Bit */ + else + { + /* Send MSB of Memory Address */ + hi2c->Instance->TXDR = I2C_MEM_ADD_MSB(MemAddress); + + /* Wait until TXIS flag is set */ + if (I2C_WaitOnTXISFlagUntilTimeout(hi2c, Timeout, Tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Send LSB of Memory Address */ + hi2c->Instance->TXDR = I2C_MEM_ADD_LSB(MemAddress); + } + + /* Wait until TC flag is set */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TC, RESET, Timeout, Tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + return HAL_OK; +} + +/** + * @brief I2C Address complete process callback. + * @param hi2c I2C handle. + * @param ITFlags Interrupt flags to handle. + * @retval None + */ +static void I2C_ITAddrCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags) +{ + uint8_t transferdirection; + uint16_t slaveaddrcode; + uint16_t ownadd1code; + uint16_t ownadd2code; + + /* Prevent unused argument(s) compilation warning */ + UNUSED(ITFlags); + + /* In case of Listen state, need to inform upper layer of address match code event */ + if (((uint32_t)hi2c->State & (uint32_t)HAL_I2C_STATE_LISTEN) == (uint32_t)HAL_I2C_STATE_LISTEN) + { + transferdirection = I2C_GET_DIR(hi2c); + slaveaddrcode = I2C_GET_ADDR_MATCH(hi2c); + ownadd1code = I2C_GET_OWN_ADDRESS1(hi2c); + ownadd2code = I2C_GET_OWN_ADDRESS2(hi2c); + + /* If 10bits addressing mode is selected */ + if (hi2c->Init.AddressingMode == I2C_ADDRESSINGMODE_10BIT) + { + if ((slaveaddrcode & SLAVE_ADDR_MSK) == ((ownadd1code >> SLAVE_ADDR_SHIFT) & SLAVE_ADDR_MSK)) + { + slaveaddrcode = ownadd1code; + hi2c->AddrEventCount++; + if (hi2c->AddrEventCount == 2U) + { + /* Reset Address Event counter */ + hi2c->AddrEventCount = 0U; + + /* Clear ADDR flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call Slave Addr callback */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->AddrCallback(hi2c, transferdirection, slaveaddrcode); +#else + HAL_I2C_AddrCallback(hi2c, transferdirection, slaveaddrcode); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + } + else + { + slaveaddrcode = ownadd2code; + + /* Disable ADDR Interrupts */ + I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call Slave Addr callback */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->AddrCallback(hi2c, transferdirection, slaveaddrcode); +#else + HAL_I2C_AddrCallback(hi2c, transferdirection, slaveaddrcode); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + } + /* else 7 bits addressing mode is selected */ + else + { + /* Disable ADDR Interrupts */ + I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call Slave Addr callback */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->AddrCallback(hi2c, transferdirection, slaveaddrcode); +#else + HAL_I2C_AddrCallback(hi2c, transferdirection, slaveaddrcode); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + } + /* Else clear address flag only */ + else + { + /* Clear ADDR flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + } +} + +/** + * @brief I2C Master sequential complete process. + * @param hi2c I2C handle. + * @retval None + */ +static void I2C_ITMasterSeqCplt(I2C_HandleTypeDef *hi2c) +{ + /* Reset I2C handle mode */ + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* No Generate Stop, to permit restart mode */ + /* The stop will be done at the end of transfer, when I2C_AUTOEND_MODE enable */ + if (hi2c->State == HAL_I2C_STATE_BUSY_TX) + { + hi2c->State = HAL_I2C_STATE_READY; + hi2c->PreviousState = I2C_STATE_MASTER_BUSY_TX; + hi2c->XferISR = NULL; + + /* Disable Interrupts */ + I2C_Disable_IRQ(hi2c, I2C_XFER_TX_IT); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->MasterTxCpltCallback(hi2c); +#else + HAL_I2C_MasterTxCpltCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + /* hi2c->State == HAL_I2C_STATE_BUSY_RX */ + else + { + hi2c->State = HAL_I2C_STATE_READY; + hi2c->PreviousState = I2C_STATE_MASTER_BUSY_RX; + hi2c->XferISR = NULL; + + /* Disable Interrupts */ + I2C_Disable_IRQ(hi2c, I2C_XFER_RX_IT); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->MasterRxCpltCallback(hi2c); +#else + HAL_I2C_MasterRxCpltCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } +} + +/** + * @brief I2C Slave sequential complete process. + * @param hi2c I2C handle. + * @retval None + */ +static void I2C_ITSlaveSeqCplt(I2C_HandleTypeDef *hi2c) +{ + uint32_t tmpcr1value = READ_REG(hi2c->Instance->CR1); + + /* Reset I2C handle mode */ + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* If a DMA is ongoing, Update handle size context */ + if (I2C_CHECK_IT_SOURCE(tmpcr1value, I2C_CR1_TXDMAEN) != RESET) + { + /* Disable DMA Request */ + hi2c->Instance->CR1 &= ~I2C_CR1_TXDMAEN; + } + else if (I2C_CHECK_IT_SOURCE(tmpcr1value, I2C_CR1_RXDMAEN) != RESET) + { + /* Disable DMA Request */ + hi2c->Instance->CR1 &= ~I2C_CR1_RXDMAEN; + } + else + { + /* Do nothing */ + } + + if (hi2c->State == HAL_I2C_STATE_BUSY_TX_LISTEN) + { + /* Remove HAL_I2C_STATE_SLAVE_BUSY_TX, keep only HAL_I2C_STATE_LISTEN */ + hi2c->State = HAL_I2C_STATE_LISTEN; + hi2c->PreviousState = I2C_STATE_SLAVE_BUSY_TX; + + /* Disable Interrupts */ + I2C_Disable_IRQ(hi2c, I2C_XFER_TX_IT); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->SlaveTxCpltCallback(hi2c); +#else + HAL_I2C_SlaveTxCpltCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + + else if (hi2c->State == HAL_I2C_STATE_BUSY_RX_LISTEN) + { + /* Remove HAL_I2C_STATE_SLAVE_BUSY_RX, keep only HAL_I2C_STATE_LISTEN */ + hi2c->State = HAL_I2C_STATE_LISTEN; + hi2c->PreviousState = I2C_STATE_SLAVE_BUSY_RX; + + /* Disable Interrupts */ + I2C_Disable_IRQ(hi2c, I2C_XFER_RX_IT); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->SlaveRxCpltCallback(hi2c); +#else + HAL_I2C_SlaveRxCpltCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + else + { + /* Nothing to do */ + } +} + +/** + * @brief I2C Master complete process. + * @param hi2c I2C handle. + * @param ITFlags Interrupt flags to handle. + * @retval None + */ +static void I2C_ITMasterCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags) +{ + uint32_t tmperror; + uint32_t tmpITFlags = ITFlags; + __IO uint32_t tmpreg; + + /* Clear STOP Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); + + /* Disable Interrupts and Store Previous state */ + if (hi2c->State == HAL_I2C_STATE_BUSY_TX) + { + I2C_Disable_IRQ(hi2c, I2C_XFER_TX_IT); + hi2c->PreviousState = I2C_STATE_MASTER_BUSY_TX; + } + else if (hi2c->State == HAL_I2C_STATE_BUSY_RX) + { + I2C_Disable_IRQ(hi2c, I2C_XFER_RX_IT); + hi2c->PreviousState = I2C_STATE_MASTER_BUSY_RX; + } + else + { + /* Do nothing */ + } + + /* Clear Configuration Register 2 */ + I2C_RESET_CR2(hi2c); + + /* Reset handle parameters */ + hi2c->XferISR = NULL; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + + if (I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_AF) != RESET) + { + /* Clear NACK Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + + /* Set acknowledge error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_AF; + } + + /* Fetch Last receive data if any */ + if ((hi2c->State == HAL_I2C_STATE_ABORT) && (I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_RXNE) != RESET)) + { + /* Read data from RXDR */ + tmpreg = (uint8_t)hi2c->Instance->RXDR; + UNUSED(tmpreg); + } + + /* Flush TX register */ + I2C_Flush_TXDR(hi2c); + + /* Store current volatile hi2c->ErrorCode, misra rule */ + tmperror = hi2c->ErrorCode; + + /* Call the corresponding callback to inform upper layer of End of Transfer */ + if ((hi2c->State == HAL_I2C_STATE_ABORT) || (tmperror != HAL_I2C_ERROR_NONE)) + { + /* Call the corresponding callback to inform upper layer of End of Transfer */ + I2C_ITError(hi2c, hi2c->ErrorCode); + } + /* hi2c->State == HAL_I2C_STATE_BUSY_TX */ + else if (hi2c->State == HAL_I2C_STATE_BUSY_TX) + { + hi2c->State = HAL_I2C_STATE_READY; + hi2c->PreviousState = I2C_STATE_NONE; + + if (hi2c->Mode == HAL_I2C_MODE_MEM) + { + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->MemTxCpltCallback(hi2c); +#else + HAL_I2C_MemTxCpltCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + else + { + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->MasterTxCpltCallback(hi2c); +#else + HAL_I2C_MasterTxCpltCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + } + /* hi2c->State == HAL_I2C_STATE_BUSY_RX */ + else if (hi2c->State == HAL_I2C_STATE_BUSY_RX) + { + hi2c->State = HAL_I2C_STATE_READY; + hi2c->PreviousState = I2C_STATE_NONE; + + if (hi2c->Mode == HAL_I2C_MODE_MEM) + { + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->MemRxCpltCallback(hi2c); +#else + HAL_I2C_MemRxCpltCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + else + { + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->MasterRxCpltCallback(hi2c); +#else + HAL_I2C_MasterRxCpltCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + } + else + { + /* Nothing to do */ + } +} + +/** + * @brief I2C Slave complete process. + * @param hi2c I2C handle. + * @param ITFlags Interrupt flags to handle. + * @retval None + */ +static void I2C_ITSlaveCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags) +{ + uint32_t tmpcr1value = READ_REG(hi2c->Instance->CR1); + uint32_t tmpITFlags = ITFlags; + uint32_t tmpoptions = hi2c->XferOptions; + HAL_I2C_StateTypeDef tmpstate = hi2c->State; + + /* Clear STOP Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); + + /* Disable Interrupts and Store Previous state */ + if ((tmpstate == HAL_I2C_STATE_BUSY_TX) || (tmpstate == HAL_I2C_STATE_BUSY_TX_LISTEN)) + { + I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT | I2C_XFER_TX_IT); + hi2c->PreviousState = I2C_STATE_SLAVE_BUSY_TX; + } + else if ((tmpstate == HAL_I2C_STATE_BUSY_RX) || (tmpstate == HAL_I2C_STATE_BUSY_RX_LISTEN)) + { + I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT | I2C_XFER_RX_IT); + hi2c->PreviousState = I2C_STATE_SLAVE_BUSY_RX; + } + else if (tmpstate == HAL_I2C_STATE_LISTEN) + { + I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT | I2C_XFER_TX_IT | I2C_XFER_RX_IT); + hi2c->PreviousState = I2C_STATE_NONE; + } + else + { + /* Do nothing */ + } + + /* Disable Address Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + + /* Clear Configuration Register 2 */ + I2C_RESET_CR2(hi2c); + + /* Flush TX register */ + I2C_Flush_TXDR(hi2c); + + /* If a DMA is ongoing, Update handle size context */ + if (I2C_CHECK_IT_SOURCE(tmpcr1value, I2C_CR1_TXDMAEN) != RESET) + { + /* Disable DMA Request */ + hi2c->Instance->CR1 &= ~I2C_CR1_TXDMAEN; + + if (hi2c->hdmatx != NULL) + { + hi2c->XferCount = (uint16_t)I2C_GET_DMA_REMAIN_DATA(hi2c->hdmatx); + } + } + else if (I2C_CHECK_IT_SOURCE(tmpcr1value, I2C_CR1_RXDMAEN) != RESET) + { + /* Disable DMA Request */ + hi2c->Instance->CR1 &= ~I2C_CR1_RXDMAEN; + + if (hi2c->hdmarx != NULL) + { + hi2c->XferCount = (uint16_t)I2C_GET_DMA_REMAIN_DATA(hi2c->hdmarx); + } + } + else + { + /* Do nothing */ + } + + /* Store Last receive data if any */ + if (I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_RXNE) != RESET) + { + /* Remove RXNE flag on temporary variable as read done */ + tmpITFlags &= ~I2C_FLAG_RXNE; + + /* Read data from RXDR */ + *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->RXDR; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + if ((hi2c->XferSize > 0U)) + { + hi2c->XferSize--; + hi2c->XferCount--; + } + } + + /* All data are not transferred, so set error code accordingly */ + if (hi2c->XferCount != 0U) + { + /* Set ErrorCode corresponding to a Non-Acknowledge */ + hi2c->ErrorCode |= HAL_I2C_ERROR_AF; + } + + if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_AF) != RESET) && \ + (I2C_CHECK_IT_SOURCE(tmpcr1value, I2C_IT_NACKI) != RESET)) + { + /* Check that I2C transfer finished */ + /* if yes, normal use case, a NACK is sent by the MASTER when Transfer is finished */ + /* Mean XferCount == 0*/ + /* So clear Flag NACKF only */ + if (hi2c->XferCount == 0U) + { + if ((hi2c->State == HAL_I2C_STATE_LISTEN) && (tmpoptions == I2C_FIRST_AND_LAST_FRAME)) + /* Same action must be done for (tmpoptions == I2C_LAST_FRAME) which removed for + Warning[Pa134]: left and right operands are identical */ + { + /* Call I2C Listen complete process */ + I2C_ITListenCplt(hi2c, tmpITFlags); + } + else if ((hi2c->State == HAL_I2C_STATE_BUSY_TX_LISTEN) && (tmpoptions != I2C_NO_OPTION_FRAME)) + { + /* Clear NACK Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + + /* Flush TX register */ + I2C_Flush_TXDR(hi2c); + + /* Last Byte is Transmitted */ + /* Call I2C Slave Sequential complete process */ + I2C_ITSlaveSeqCplt(hi2c); + } + else + { + /* Clear NACK Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + } + } + else + { + /* if no, error use case, a Non-Acknowledge of last Data is generated by the MASTER*/ + /* Clear NACK Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + + /* Set ErrorCode corresponding to a Non-Acknowledge */ + hi2c->ErrorCode |= HAL_I2C_ERROR_AF; + + if ((tmpoptions == I2C_FIRST_FRAME) || (tmpoptions == I2C_NEXT_FRAME)) + { + /* Call the corresponding callback to inform upper layer of End of Transfer */ + I2C_ITError(hi2c, hi2c->ErrorCode); + } + } + } + + hi2c->Mode = HAL_I2C_MODE_NONE; + hi2c->XferISR = NULL; + + if (hi2c->ErrorCode != HAL_I2C_ERROR_NONE) + { + /* Call the corresponding callback to inform upper layer of End of Transfer */ + I2C_ITError(hi2c, hi2c->ErrorCode); + + /* Call the Listen Complete callback, to inform upper layer of the end of Listen usecase */ + if (hi2c->State == HAL_I2C_STATE_LISTEN) + { + /* Call I2C Listen complete process */ + I2C_ITListenCplt(hi2c, tmpITFlags); + } + } + else if (hi2c->XferOptions != I2C_NO_OPTION_FRAME) + { + /* Call the Sequential Complete callback, to inform upper layer of the end of Transfer */ + I2C_ITSlaveSeqCplt(hi2c); + + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->State = HAL_I2C_STATE_READY; + hi2c->PreviousState = I2C_STATE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call the Listen Complete callback, to inform upper layer of the end of Listen usecase */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->ListenCpltCallback(hi2c); +#else + HAL_I2C_ListenCpltCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + /* Call the corresponding callback to inform upper layer of End of Transfer */ + else if (hi2c->State == HAL_I2C_STATE_BUSY_RX) + { + hi2c->State = HAL_I2C_STATE_READY; + hi2c->PreviousState = I2C_STATE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->SlaveRxCpltCallback(hi2c); +#else + HAL_I2C_SlaveRxCpltCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + else + { + hi2c->State = HAL_I2C_STATE_READY; + hi2c->PreviousState = I2C_STATE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->SlaveTxCpltCallback(hi2c); +#else + HAL_I2C_SlaveTxCpltCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } +} + +/** + * @brief I2C Listen complete process. + * @param hi2c I2C handle. + * @param ITFlags Interrupt flags to handle. + * @retval None + */ +static void I2C_ITListenCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags) +{ + /* Reset handle parameters */ + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->PreviousState = I2C_STATE_NONE; + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + hi2c->XferISR = NULL; + + /* Store Last receive data if any */ + if (I2C_CHECK_FLAG(ITFlags, I2C_FLAG_RXNE) != RESET) + { + /* Read data from RXDR */ + *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->RXDR; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + if ((hi2c->XferSize > 0U)) + { + hi2c->XferSize--; + hi2c->XferCount--; + + /* Set ErrorCode corresponding to a Non-Acknowledge */ + hi2c->ErrorCode |= HAL_I2C_ERROR_AF; + } + } + + /* Disable all Interrupts*/ + I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT | I2C_XFER_RX_IT | I2C_XFER_TX_IT); + + /* Clear NACK Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call the Listen Complete callback, to inform upper layer of the end of Listen usecase */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->ListenCpltCallback(hi2c); +#else + HAL_I2C_ListenCpltCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ +} + +/** + * @brief I2C interrupts error process. + * @param hi2c I2C handle. + * @param ErrorCode Error code to handle. + * @retval None + */ +static void I2C_ITError(I2C_HandleTypeDef *hi2c, uint32_t ErrorCode) +{ + HAL_I2C_StateTypeDef tmpstate = hi2c->State; + + uint32_t tmppreviousstate; + + /* Reset handle parameters */ + hi2c->Mode = HAL_I2C_MODE_NONE; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->XferCount = 0U; + + /* Set new error code */ + hi2c->ErrorCode |= ErrorCode; + + /* Disable Interrupts */ + if ((tmpstate == HAL_I2C_STATE_LISTEN) || + (tmpstate == HAL_I2C_STATE_BUSY_TX_LISTEN) || + (tmpstate == HAL_I2C_STATE_BUSY_RX_LISTEN)) + { + /* Disable all interrupts, except interrupts related to LISTEN state */ + I2C_Disable_IRQ(hi2c, I2C_XFER_RX_IT | I2C_XFER_TX_IT); + + /* keep HAL_I2C_STATE_LISTEN if set */ + hi2c->State = HAL_I2C_STATE_LISTEN; + hi2c->XferISR = I2C_Slave_ISR_IT; + } + else + { + /* Disable all interrupts */ + I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT | I2C_XFER_RX_IT | I2C_XFER_TX_IT); + + /* Flush TX register */ + I2C_Flush_TXDR(hi2c); + + /* If state is an abort treatment on going, don't change state */ + /* This change will be do later */ + if (hi2c->State != HAL_I2C_STATE_ABORT) + { + /* Set HAL_I2C_STATE_READY */ + hi2c->State = HAL_I2C_STATE_READY; + + /* Check if a STOPF is detected */ + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_STOPF) == SET) + { + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_AF) == SET) + { + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + hi2c->ErrorCode |= HAL_I2C_ERROR_AF; + } + + /* Clear STOP Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); + } + + } + hi2c->XferISR = NULL; + } + + /* Abort DMA TX transfer if any */ + tmppreviousstate = hi2c->PreviousState; + + if ((hi2c->hdmatx != NULL) && ((tmppreviousstate == I2C_STATE_MASTER_BUSY_TX) || \ + (tmppreviousstate == I2C_STATE_SLAVE_BUSY_TX))) + { + if ((hi2c->Instance->CR1 & I2C_CR1_TXDMAEN) == I2C_CR1_TXDMAEN) + { + hi2c->Instance->CR1 &= ~I2C_CR1_TXDMAEN; + } + + if (HAL_DMA_GetState(hi2c->hdmatx) != HAL_DMA_STATE_READY) + { + /* Set the I2C DMA Abort callback : + will lead to call HAL_I2C_ErrorCallback() at end of DMA abort procedure */ + hi2c->hdmatx->XferAbortCallback = I2C_DMAAbort; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Abort DMA TX */ + if (HAL_DMA_Abort_IT(hi2c->hdmatx) != HAL_OK) + { + /* Call Directly XferAbortCallback function in case of error */ + hi2c->hdmatx->XferAbortCallback(hi2c->hdmatx); + } + } + else + { + I2C_TreatErrorCallback(hi2c); + } + } + /* Abort DMA RX transfer if any */ + else if ((hi2c->hdmarx != NULL) && ((tmppreviousstate == I2C_STATE_MASTER_BUSY_RX) || \ + (tmppreviousstate == I2C_STATE_SLAVE_BUSY_RX))) + { + if ((hi2c->Instance->CR1 & I2C_CR1_RXDMAEN) == I2C_CR1_RXDMAEN) + { + hi2c->Instance->CR1 &= ~I2C_CR1_RXDMAEN; + } + + if (HAL_DMA_GetState(hi2c->hdmarx) != HAL_DMA_STATE_READY) + { + /* Set the I2C DMA Abort callback : + will lead to call HAL_I2C_ErrorCallback() at end of DMA abort procedure */ + hi2c->hdmarx->XferAbortCallback = I2C_DMAAbort; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Abort DMA RX */ + if (HAL_DMA_Abort_IT(hi2c->hdmarx) != HAL_OK) + { + /* Call Directly hi2c->hdmarx->XferAbortCallback function in case of error */ + hi2c->hdmarx->XferAbortCallback(hi2c->hdmarx); + } + } + else + { + I2C_TreatErrorCallback(hi2c); + } + } + else + { + I2C_TreatErrorCallback(hi2c); + } +} + +/** + * @brief I2C Error callback treatment. + * @param hi2c I2C handle. + * @retval None + */ +static void I2C_TreatErrorCallback(I2C_HandleTypeDef *hi2c) +{ + if (hi2c->State == HAL_I2C_STATE_ABORT) + { + hi2c->State = HAL_I2C_STATE_READY; + hi2c->PreviousState = I2C_STATE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->AbortCpltCallback(hi2c); +#else + HAL_I2C_AbortCpltCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + else + { + hi2c->PreviousState = I2C_STATE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->ErrorCallback(hi2c); +#else + HAL_I2C_ErrorCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } +} + +/** + * @brief I2C Tx data register flush process. + * @param hi2c I2C handle. + * @retval None + */ +static void I2C_Flush_TXDR(I2C_HandleTypeDef *hi2c) +{ + /* If a pending TXIS flag is set */ + /* Write a dummy data in TXDR to clear it */ + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_TXIS) != RESET) + { + hi2c->Instance->TXDR = 0x00U; + } + + /* Flush TX register if not empty */ + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_TXE) == RESET) + { + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_TXE); + } +} + +/** + * @brief DMA I2C master transmit process complete callback. + * @param hdma DMA handle + * @retval None + */ +static void I2C_DMAMasterTransmitCplt(DMA_HandleTypeDef *hdma) +{ + /* Derogation MISRAC2012-Rule-11.5 */ + I2C_HandleTypeDef *hi2c = (I2C_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); + + /* Disable DMA Request */ + hi2c->Instance->CR1 &= ~I2C_CR1_TXDMAEN; + + /* If last transfer, enable STOP interrupt */ + if (hi2c->XferCount == 0U) + { + /* Enable STOP interrupt */ + I2C_Enable_IRQ(hi2c, I2C_XFER_CPLT_IT); + } + /* else prepare a new DMA transfer and enable TCReload interrupt */ + else + { + /* Update Buffer pointer */ + hi2c->pBuffPtr += hi2c->XferSize; + + /* Set the XferSize to transfer */ + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + } + else + { + hi2c->XferSize = hi2c->XferCount; + } + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)hi2c->pBuffPtr, (uint32_t)&hi2c->Instance->TXDR, + hi2c->XferSize) != HAL_OK) + { + /* Call the corresponding callback to inform upper layer of End of Transfer */ + I2C_ITError(hi2c, HAL_I2C_ERROR_DMA); + } + else + { + /* Enable TC interrupts */ + I2C_Enable_IRQ(hi2c, I2C_XFER_RELOAD_IT); + } + } +} + + +/** + * @brief DMA I2C slave transmit process complete callback. + * @param hdma DMA handle + * @retval None + */ +static void I2C_DMASlaveTransmitCplt(DMA_HandleTypeDef *hdma) +{ + /* Derogation MISRAC2012-Rule-11.5 */ + I2C_HandleTypeDef *hi2c = (I2C_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); + uint32_t tmpoptions = hi2c->XferOptions; + + if ((tmpoptions == I2C_NEXT_FRAME) || (tmpoptions == I2C_FIRST_FRAME)) + { + /* Disable DMA Request */ + hi2c->Instance->CR1 &= ~I2C_CR1_TXDMAEN; + + /* Last Byte is Transmitted */ + /* Call I2C Slave Sequential complete process */ + I2C_ITSlaveSeqCplt(hi2c); + } + else + { + /* No specific action, Master fully manage the generation of STOP condition */ + /* Mean that this generation can arrive at any time, at the end or during DMA process */ + /* So STOP condition should be manage through Interrupt treatment */ + } +} + + +/** + * @brief DMA I2C master receive process complete callback. + * @param hdma DMA handle + * @retval None + */ +static void I2C_DMAMasterReceiveCplt(DMA_HandleTypeDef *hdma) +{ + /* Derogation MISRAC2012-Rule-11.5 */ + I2C_HandleTypeDef *hi2c = (I2C_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); + + /* Disable DMA Request */ + hi2c->Instance->CR1 &= ~I2C_CR1_RXDMAEN; + + /* If last transfer, enable STOP interrupt */ + if (hi2c->XferCount == 0U) + { + /* Enable STOP interrupt */ + I2C_Enable_IRQ(hi2c, I2C_XFER_CPLT_IT); + } + /* else prepare a new DMA transfer and enable TCReload interrupt */ + else + { + /* Update Buffer pointer */ + hi2c->pBuffPtr += hi2c->XferSize; + + /* Set the XferSize to transfer */ + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + /* Errata workaround 170323 */ + if (I2C_GET_DIR(hi2c) == I2C_DIRECTION_RECEIVE) + { + hi2c->XferSize = 1U; + } + else + { + hi2c->XferSize = MAX_NBYTE_SIZE; + } + } + else + { + hi2c->XferSize = hi2c->XferCount; + } + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(hi2c->hdmarx, (uint32_t)&hi2c->Instance->RXDR, (uint32_t)hi2c->pBuffPtr, + hi2c->XferSize) != HAL_OK) + { + /* Call the corresponding callback to inform upper layer of End of Transfer */ + I2C_ITError(hi2c, HAL_I2C_ERROR_DMA); + } + else + { + /* Enable TC interrupts */ + I2C_Enable_IRQ(hi2c, I2C_XFER_RELOAD_IT); + } + } +} + + +/** + * @brief DMA I2C slave receive process complete callback. + * @param hdma DMA handle + * @retval None + */ +static void I2C_DMASlaveReceiveCplt(DMA_HandleTypeDef *hdma) +{ + /* Derogation MISRAC2012-Rule-11.5 */ + I2C_HandleTypeDef *hi2c = (I2C_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); + uint32_t tmpoptions = hi2c->XferOptions; + + if ((I2C_GET_DMA_REMAIN_DATA(hi2c->hdmarx) == 0U) && \ + (tmpoptions != I2C_NO_OPTION_FRAME)) + { + /* Disable DMA Request */ + hi2c->Instance->CR1 &= ~I2C_CR1_RXDMAEN; + + /* Call I2C Slave Sequential complete process */ + I2C_ITSlaveSeqCplt(hi2c); + } + else + { + /* No specific action, Master fully manage the generation of STOP condition */ + /* Mean that this generation can arrive at any time, at the end or during DMA process */ + /* So STOP condition should be manage through Interrupt treatment */ + } +} + + +/** + * @brief DMA I2C communication error callback. + * @param hdma DMA handle + * @retval None + */ +static void I2C_DMAError(DMA_HandleTypeDef *hdma) +{ + /* Derogation MISRAC2012-Rule-11.5 */ + I2C_HandleTypeDef *hi2c = (I2C_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); + + /* Disable Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + + /* Call the corresponding callback to inform upper layer of End of Transfer */ + I2C_ITError(hi2c, HAL_I2C_ERROR_DMA); +} + + +/** + * @brief DMA I2C communication abort callback + * (To be called at end of DMA Abort procedure). + * @param hdma DMA handle. + * @retval None + */ +static void I2C_DMAAbort(DMA_HandleTypeDef *hdma) +{ + /* Derogation MISRAC2012-Rule-11.5 */ + I2C_HandleTypeDef *hi2c = (I2C_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); + + /* Reset AbortCpltCallback */ + if (hi2c->hdmatx != NULL) + { + hi2c->hdmatx->XferAbortCallback = NULL; + } + if (hi2c->hdmarx != NULL) + { + hi2c->hdmarx->XferAbortCallback = NULL; + } + + I2C_TreatErrorCallback(hi2c); +} + + +/** + * @brief This function handles I2C Communication Timeout. It waits + * until a flag is no longer in the specified status. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param Flag Specifies the I2C flag to check. + * @param Status The actual Flag status (SET or RESET). + * @param Timeout Timeout duration + * @param Tickstart Tick start value + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_WaitOnFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Flag, FlagStatus Status, + uint32_t Timeout, uint32_t Tickstart) +{ + while (__HAL_I2C_GET_FLAG(hi2c, Flag) == Status) + { + /* Check if an error is detected */ + if (I2C_IsErrorOccurred(hi2c, Timeout, Tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Check for the Timeout */ + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - Tickstart) > Timeout) || (Timeout == 0U)) + { + if ((__HAL_I2C_GET_FLAG(hi2c, Flag) == Status)) + { + hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT; + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + return HAL_ERROR; + } + } + } + } + return HAL_OK; +} + +/** + * @brief This function handles I2C Communication Timeout for specific usage of TXIS flag. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param Timeout Timeout duration + * @param Tickstart Tick start value + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_WaitOnTXISFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout, + uint32_t Tickstart) +{ + while (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_TXIS) == RESET) + { + /* Check if an error is detected */ + if (I2C_IsErrorOccurred(hi2c, Timeout, Tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Check for the Timeout */ + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - Tickstart) > Timeout) || (Timeout == 0U)) + { + if ((__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_TXIS) == RESET)) + { + hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT; + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + } + } + } + return HAL_OK; +} + +/** + * @brief This function handles I2C Communication Timeout for specific usage of STOP flag. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param Timeout Timeout duration + * @param Tickstart Tick start value + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_WaitOnSTOPFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout, + uint32_t Tickstart) +{ + while (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_STOPF) == RESET) + { + /* Check if an error is detected */ + if (I2C_IsErrorOccurred(hi2c, Timeout, Tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Check for the Timeout */ + if (((HAL_GetTick() - Tickstart) > Timeout) || (Timeout == 0U)) + { + if ((__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_STOPF) == RESET)) + { + hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT; + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + } + } + return HAL_OK; +} + +/** + * @brief This function handles I2C Communication Timeout for specific usage of RXNE flag. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param Timeout Timeout duration + * @param Tickstart Tick start value + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_WaitOnRXNEFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout, + uint32_t Tickstart) +{ + HAL_StatusTypeDef status = HAL_OK; + + while ((__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_RXNE) == RESET) && (status == HAL_OK)) + { + /* Check if an error is detected */ + if (I2C_IsErrorOccurred(hi2c, Timeout, Tickstart) != HAL_OK) + { + status = HAL_ERROR; + } + + /* Check if a STOPF is detected */ + if ((__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_STOPF) == SET) && (status == HAL_OK)) + { + /* Check if an RXNE is pending */ + /* Store Last receive data if any */ + if ((__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_RXNE) == SET) && (hi2c->XferSize > 0U)) + { + /* Return HAL_OK */ + /* The Reading of data from RXDR will be done in caller function */ + status = HAL_OK; + } + + /* Check a no-acknowledge have been detected */ + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_AF) == SET) + { + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + hi2c->ErrorCode = HAL_I2C_ERROR_AF; + + /* Clear STOP Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); + + /* Clear Configuration Register 2 */ + I2C_RESET_CR2(hi2c); + + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + status = HAL_ERROR; + } + else + { + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + } + } + + /* Check for the Timeout */ + if ((((HAL_GetTick() - Tickstart) > Timeout) || (Timeout == 0U)) && (status == HAL_OK)) + { + if ((__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_RXNE) == RESET)) + { + hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT; + hi2c->State = HAL_I2C_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + status = HAL_ERROR; + } + } + } + return status; +} + +/** + * @brief This function handles errors detection during an I2C Communication. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param Timeout Timeout duration + * @param Tickstart Tick start value + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_IsErrorOccurred(I2C_HandleTypeDef *hi2c, uint32_t Timeout, uint32_t Tickstart) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t itflag = hi2c->Instance->ISR; + uint32_t error_code = 0; + uint32_t tickstart = Tickstart; + uint32_t tmp1; + HAL_I2C_ModeTypeDef tmp2; + + if (HAL_IS_BIT_SET(itflag, I2C_FLAG_AF)) + { + /* Clear NACKF Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + + /* Wait until STOP Flag is set or timeout occurred */ + /* AutoEnd should be initiate after AF */ + while ((__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_STOPF) == RESET) && (status == HAL_OK)) + { + /* Check for the Timeout */ + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U)) + { + tmp1 = (uint32_t)(hi2c->Instance->CR2 & I2C_CR2_STOP); + tmp2 = hi2c->Mode; + + /* In case of I2C still busy, try to regenerate a STOP manually */ + if ((__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) != RESET) && \ + (tmp1 != I2C_CR2_STOP) && \ + (tmp2 != HAL_I2C_MODE_SLAVE)) + { + /* Generate Stop */ + hi2c->Instance->CR2 |= I2C_CR2_STOP; + + /* Update Tick with new reference */ + tickstart = HAL_GetTick(); + } + + while (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_STOPF) == RESET) + { + /* Check for the Timeout */ + if ((HAL_GetTick() - tickstart) > I2C_TIMEOUT_STOPF) + { + error_code |= HAL_I2C_ERROR_TIMEOUT; + + status = HAL_ERROR; + + break; + } + } + } + } + } + + /* In case STOP Flag is detected, clear it */ + if (status == HAL_OK) + { + /* Clear STOP Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); + } + + error_code |= HAL_I2C_ERROR_AF; + + status = HAL_ERROR; + } + + /* Refresh Content of Status register */ + itflag = hi2c->Instance->ISR; + + /* Then verify if an additional errors occurs */ + /* Check if a Bus error occurred */ + if (HAL_IS_BIT_SET(itflag, I2C_FLAG_BERR)) + { + error_code |= HAL_I2C_ERROR_BERR; + + /* Clear BERR flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_BERR); + + status = HAL_ERROR; + } + + /* Check if an Over-Run/Under-Run error occurred */ + if (HAL_IS_BIT_SET(itflag, I2C_FLAG_OVR)) + { + error_code |= HAL_I2C_ERROR_OVR; + + /* Clear OVR flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_OVR); + + status = HAL_ERROR; + } + + /* Check if an Arbitration Loss error occurred */ + if (HAL_IS_BIT_SET(itflag, I2C_FLAG_ARLO)) + { + error_code |= HAL_I2C_ERROR_ARLO; + + /* Clear ARLO flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ARLO); + + status = HAL_ERROR; + } + + if (status != HAL_OK) + { + /* Flush TX register */ + I2C_Flush_TXDR(hi2c); + + /* Clear Configuration Register 2 */ + I2C_RESET_CR2(hi2c); + + hi2c->ErrorCode |= error_code; + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + } + + return status; +} + +/** + * @brief Handles I2Cx communication when starting transfer or during transfer (TC or TCR flag are set). + * @param hi2c I2C handle. + * @param DevAddress Specifies the slave address to be programmed. + * @param Size Specifies the number of bytes to be programmed. + * This parameter must be a value between 0 and 255. + * @param Mode New state of the I2C START condition generation. + * This parameter can be one of the following values: + * @arg @ref I2C_RELOAD_MODE Enable Reload mode . + * @arg @ref I2C_AUTOEND_MODE Enable Automatic end mode. + * @arg @ref I2C_SOFTEND_MODE Enable Software end mode. + * @param Request New state of the I2C START condition generation. + * This parameter can be one of the following values: + * @arg @ref I2C_NO_STARTSTOP Don't Generate stop and start condition. + * @arg @ref I2C_GENERATE_STOP Generate stop condition (Size should be set to 0). + * @arg @ref I2C_GENERATE_START_READ Generate Restart for read request. + * @arg @ref I2C_GENERATE_START_WRITE Generate Restart for write request. + * @retval None + */ +static void I2C_TransferConfig(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t Size, uint32_t Mode, + uint32_t Request) +{ + /* Check the parameters */ + assert_param(IS_I2C_ALL_INSTANCE(hi2c->Instance)); + assert_param(IS_TRANSFER_MODE(Mode)); + assert_param(IS_TRANSFER_REQUEST(Request)); + + /* Declaration of tmp to prevent undefined behavior of volatile usage */ + uint32_t tmp = ((uint32_t)(((uint32_t)DevAddress & I2C_CR2_SADD) | \ + (((uint32_t)Size << I2C_CR2_NBYTES_Pos) & I2C_CR2_NBYTES) | \ + (uint32_t)Mode | (uint32_t)Request) & (~0x80000000U)); + + /* update CR2 register */ + MODIFY_REG(hi2c->Instance->CR2, \ + ((I2C_CR2_SADD | I2C_CR2_NBYTES | I2C_CR2_RELOAD | I2C_CR2_AUTOEND | \ + (I2C_CR2_RD_WRN & (uint32_t)(Request >> (31U - I2C_CR2_RD_WRN_Pos))) | \ + I2C_CR2_START | I2C_CR2_STOP)), tmp); +} + +/** + * @brief Manage the enabling of Interrupts. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param InterruptRequest Value of @ref I2C_Interrupt_configuration_definition. + * @retval None + */ +static void I2C_Enable_IRQ(I2C_HandleTypeDef *hi2c, uint16_t InterruptRequest) +{ + uint32_t tmpisr = 0U; + + if ((hi2c->XferISR != I2C_Master_ISR_DMA) && \ + (hi2c->XferISR != I2C_Slave_ISR_DMA) && \ + (hi2c->XferISR != I2C_Mem_ISR_DMA)) + { + if ((InterruptRequest & I2C_XFER_LISTEN_IT) == I2C_XFER_LISTEN_IT) + { + /* Enable ERR, STOP, NACK and ADDR interrupts */ + tmpisr |= I2C_IT_ADDRI | I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_ERRI; + } + + if ((InterruptRequest & I2C_XFER_TX_IT) == I2C_XFER_TX_IT) + { + /* Enable ERR, TC, STOP, NACK and TXI interrupts */ + tmpisr |= I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_TXI; + } + + if ((InterruptRequest & I2C_XFER_RX_IT) == I2C_XFER_RX_IT) + { + /* Enable ERR, TC, STOP, NACK and RXI interrupts */ + tmpisr |= I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_RXI; + } + + if (InterruptRequest == I2C_XFER_ERROR_IT) + { + /* Enable ERR and NACK interrupts */ + tmpisr |= I2C_IT_ERRI | I2C_IT_NACKI; + } + + if (InterruptRequest == I2C_XFER_CPLT_IT) + { + /* Enable STOP interrupts */ + tmpisr |= I2C_IT_STOPI; + } + } + + else + { + if ((InterruptRequest & I2C_XFER_LISTEN_IT) == I2C_XFER_LISTEN_IT) + { + /* Enable ERR, STOP, NACK and ADDR interrupts */ + tmpisr |= I2C_IT_ADDRI | I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_ERRI; + } + + if ((InterruptRequest & I2C_XFER_TX_IT) == I2C_XFER_TX_IT) + { + /* Enable ERR, TC, STOP, NACK and TXI interrupts */ + tmpisr |= I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_TXI; + } + + if ((InterruptRequest & I2C_XFER_RX_IT) == I2C_XFER_RX_IT) + { + /* Enable ERR, TC, STOP, NACK and RXI interrupts */ + tmpisr |= I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_RXI; + } + + if (InterruptRequest == I2C_XFER_ERROR_IT) + { + /* Enable ERR and NACK interrupts */ + tmpisr |= I2C_IT_ERRI | I2C_IT_NACKI; + } + + if (InterruptRequest == I2C_XFER_CPLT_IT) + { + /* Enable STOP interrupts */ + tmpisr |= (I2C_IT_STOPI | I2C_IT_TCI); + } + + if (InterruptRequest == I2C_XFER_RELOAD_IT) + { + /* Enable TC interrupts */ + tmpisr |= I2C_IT_TCI; + } + } + + /* Enable interrupts only at the end */ + /* to avoid the risk of I2C interrupt handle execution before */ + /* all interrupts requested done */ + __HAL_I2C_ENABLE_IT(hi2c, tmpisr); +} + +/** + * @brief Manage the disabling of Interrupts. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param InterruptRequest Value of @ref I2C_Interrupt_configuration_definition. + * @retval None + */ +static void I2C_Disable_IRQ(I2C_HandleTypeDef *hi2c, uint16_t InterruptRequest) +{ + uint32_t tmpisr = 0U; + + if ((InterruptRequest & I2C_XFER_TX_IT) == I2C_XFER_TX_IT) + { + /* Disable TC and TXI interrupts */ + tmpisr |= I2C_IT_TCI | I2C_IT_TXI; + + if (((uint32_t)hi2c->State & (uint32_t)HAL_I2C_STATE_LISTEN) != (uint32_t)HAL_I2C_STATE_LISTEN) + { + /* Disable NACK and STOP interrupts */ + tmpisr |= I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_ERRI; + } + } + + if ((InterruptRequest & I2C_XFER_RX_IT) == I2C_XFER_RX_IT) + { + /* Disable TC and RXI interrupts */ + tmpisr |= I2C_IT_TCI | I2C_IT_RXI; + + if (((uint32_t)hi2c->State & (uint32_t)HAL_I2C_STATE_LISTEN) != (uint32_t)HAL_I2C_STATE_LISTEN) + { + /* Disable NACK and STOP interrupts */ + tmpisr |= I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_ERRI; + } + } + + if ((InterruptRequest & I2C_XFER_LISTEN_IT) == I2C_XFER_LISTEN_IT) + { + /* Disable ADDR, NACK and STOP interrupts */ + tmpisr |= I2C_IT_ADDRI | I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_ERRI; + } + + if (InterruptRequest == I2C_XFER_ERROR_IT) + { + /* Enable ERR and NACK interrupts */ + tmpisr |= I2C_IT_ERRI | I2C_IT_NACKI; + } + + if (InterruptRequest == I2C_XFER_CPLT_IT) + { + /* Enable STOP interrupts */ + tmpisr |= I2C_IT_STOPI; + } + + if (InterruptRequest == I2C_XFER_RELOAD_IT) + { + /* Enable TC interrupts */ + tmpisr |= I2C_IT_TCI; + } + + /* Disable interrupts only at the end */ + /* to avoid a breaking situation like at "t" time */ + /* all disable interrupts request are not done */ + __HAL_I2C_DISABLE_IT(hi2c, tmpisr); +} + +/** + * @brief Convert I2Cx OTHER_xxx XferOptions to functional XferOptions. + * @param hi2c I2C handle. + * @retval None + */ +static void I2C_ConvertOtherXferOptions(I2C_HandleTypeDef *hi2c) +{ + /* if user set XferOptions to I2C_OTHER_FRAME */ + /* it request implicitly to generate a restart condition */ + /* set XferOptions to I2C_FIRST_FRAME */ + if (hi2c->XferOptions == I2C_OTHER_FRAME) + { + hi2c->XferOptions = I2C_FIRST_FRAME; + } + /* else if user set XferOptions to I2C_OTHER_AND_LAST_FRAME */ + /* it request implicitly to generate a restart condition */ + /* then generate a stop condition at the end of transfer */ + /* set XferOptions to I2C_FIRST_AND_LAST_FRAME */ + else if (hi2c->XferOptions == I2C_OTHER_AND_LAST_FRAME) + { + hi2c->XferOptions = I2C_FIRST_AND_LAST_FRAME; + } + else + { + /* Nothing to do */ + } +} + +/** + * @} + */ + +#endif /* HAL_I2C_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ diff --git a/CablePositioning_IAP_V1.0/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c_ex.c b/CablePositioning_IAP_V1.0/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c_ex.c index 4b77304..f111b69 100644 --- a/CablePositioning_IAP_V1.0/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c_ex.c +++ b/CablePositioning_IAP_V1.0/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c_ex.c @@ -1,368 +1,368 @@ -/** - ****************************************************************************** - * @file stm32l4xx_hal_i2c_ex.c - * @author MCD Application Team - * @brief I2C Extended HAL module driver. - * This file provides firmware functions to manage the following - * functionalities of I2C Extended peripheral: - * + Filter Mode Functions - * + WakeUp Mode Functions - * + FastModePlus Functions - * - ****************************************************************************** - * @attention - * - * Copyright (c) 2017 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - @verbatim - ============================================================================== - ##### I2C peripheral Extended features ##### - ============================================================================== - - [..] Comparing to other previous devices, the I2C interface for STM32L4xx - devices contains the following additional features - - (+) Possibility to disable or enable Analog Noise Filter - (+) Use of a configured Digital Noise Filter - (+) Disable or enable wakeup from Stop mode(s) - (+) Disable or enable Fast Mode Plus - - ##### How to use this driver ##### - ============================================================================== - [..] This driver provides functions to configure Noise Filter and Wake Up Feature - (#) Configure I2C Analog noise filter using the function HAL_I2CEx_ConfigAnalogFilter() - (#) Configure I2C Digital noise filter using the function HAL_I2CEx_ConfigDigitalFilter() - (#) Configure the enable or disable of I2C Wake Up Mode using the functions : - (++) HAL_I2CEx_EnableWakeUp() - (++) HAL_I2CEx_DisableWakeUp() - (#) Configure the enable or disable of fast mode plus driving capability using the functions : - (++) HAL_I2CEx_EnableFastModePlus() - (++) HAL_I2CEx_DisableFastModePlus() - @endverbatim - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32l4xx_hal.h" - -/** @addtogroup STM32L4xx_HAL_Driver - * @{ - */ - -/** @defgroup I2CEx I2CEx - * @brief I2C Extended HAL module driver - * @{ - */ - -#ifdef HAL_I2C_MODULE_ENABLED - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ -/* Private functions ---------------------------------------------------------*/ - -/** @defgroup I2CEx_Exported_Functions I2C Extended Exported Functions - * @{ - */ - -/** @defgroup I2CEx_Exported_Functions_Group1 Filter Mode Functions - * @brief Filter Mode Functions - * -@verbatim - =============================================================================== - ##### Filter Mode Functions ##### - =============================================================================== - [..] This section provides functions allowing to: - (+) Configure Noise Filters - -@endverbatim - * @{ - */ - -/** - * @brief Configure I2C Analog noise filter. - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2Cx peripheral. - * @param AnalogFilter New state of the Analog filter. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2CEx_ConfigAnalogFilter(I2C_HandleTypeDef *hi2c, uint32_t AnalogFilter) -{ - /* Check the parameters */ - assert_param(IS_I2C_ALL_INSTANCE(hi2c->Instance)); - assert_param(IS_I2C_ANALOG_FILTER(AnalogFilter)); - - if (hi2c->State == HAL_I2C_STATE_READY) - { - /* Process Locked */ - __HAL_LOCK(hi2c); - - hi2c->State = HAL_I2C_STATE_BUSY; - - /* Disable the selected I2C peripheral */ - __HAL_I2C_DISABLE(hi2c); - - /* Reset I2Cx ANOFF bit */ - hi2c->Instance->CR1 &= ~(I2C_CR1_ANFOFF); - - /* Set analog filter bit*/ - hi2c->Instance->CR1 |= AnalogFilter; - - __HAL_I2C_ENABLE(hi2c); - - hi2c->State = HAL_I2C_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Configure I2C Digital noise filter. - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2Cx peripheral. - * @param DigitalFilter Coefficient of digital noise filter between Min_Data=0x00 and Max_Data=0x0F. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2CEx_ConfigDigitalFilter(I2C_HandleTypeDef *hi2c, uint32_t DigitalFilter) -{ - uint32_t tmpreg; - - /* Check the parameters */ - assert_param(IS_I2C_ALL_INSTANCE(hi2c->Instance)); - assert_param(IS_I2C_DIGITAL_FILTER(DigitalFilter)); - - if (hi2c->State == HAL_I2C_STATE_READY) - { - /* Process Locked */ - __HAL_LOCK(hi2c); - - hi2c->State = HAL_I2C_STATE_BUSY; - - /* Disable the selected I2C peripheral */ - __HAL_I2C_DISABLE(hi2c); - - /* Get the old register value */ - tmpreg = hi2c->Instance->CR1; - - /* Reset I2Cx DNF bits [11:8] */ - tmpreg &= ~(I2C_CR1_DNF); - - /* Set I2Cx DNF coefficient */ - tmpreg |= DigitalFilter << 8U; - - /* Store the new register value */ - hi2c->Instance->CR1 = tmpreg; - - __HAL_I2C_ENABLE(hi2c); - - hi2c->State = HAL_I2C_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} -/** - * @} - */ - -/** @defgroup I2CEx_Exported_Functions_Group2 WakeUp Mode Functions - * @brief WakeUp Mode Functions - * -@verbatim - =============================================================================== - ##### WakeUp Mode Functions ##### - =============================================================================== - [..] This section provides functions allowing to: - (+) Configure Wake Up Feature - -@endverbatim - * @{ - */ - -/** - * @brief Enable I2C wakeup from Stop mode(s). - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2Cx peripheral. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2CEx_EnableWakeUp(I2C_HandleTypeDef *hi2c) -{ - /* Check the parameters */ - assert_param(IS_I2C_WAKEUP_FROMSTOP_INSTANCE(hi2c->Instance)); - - if (hi2c->State == HAL_I2C_STATE_READY) - { - /* Process Locked */ - __HAL_LOCK(hi2c); - - hi2c->State = HAL_I2C_STATE_BUSY; - - /* Disable the selected I2C peripheral */ - __HAL_I2C_DISABLE(hi2c); - - /* Enable wakeup from stop mode */ - hi2c->Instance->CR1 |= I2C_CR1_WUPEN; - - __HAL_I2C_ENABLE(hi2c); - - hi2c->State = HAL_I2C_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Disable I2C wakeup from Stop mode(s). - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2Cx peripheral. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2CEx_DisableWakeUp(I2C_HandleTypeDef *hi2c) -{ - /* Check the parameters */ - assert_param(IS_I2C_WAKEUP_FROMSTOP_INSTANCE(hi2c->Instance)); - - if (hi2c->State == HAL_I2C_STATE_READY) - { - /* Process Locked */ - __HAL_LOCK(hi2c); - - hi2c->State = HAL_I2C_STATE_BUSY; - - /* Disable the selected I2C peripheral */ - __HAL_I2C_DISABLE(hi2c); - - /* Enable wakeup from stop mode */ - hi2c->Instance->CR1 &= ~(I2C_CR1_WUPEN); - - __HAL_I2C_ENABLE(hi2c); - - hi2c->State = HAL_I2C_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} -/** - * @} - */ - -/** @defgroup I2CEx_Exported_Functions_Group3 Fast Mode Plus Functions - * @brief Fast Mode Plus Functions - * -@verbatim - =============================================================================== - ##### Fast Mode Plus Functions ##### - =============================================================================== - [..] This section provides functions allowing to: - (+) Configure Fast Mode Plus - -@endverbatim - * @{ - */ - -/** - * @brief Enable the I2C fast mode plus driving capability. - * @param ConfigFastModePlus Selects the pin. - * This parameter can be one of the @ref I2CEx_FastModePlus values - * @note For I2C1, fast mode plus driving capability can be enabled on all selected - * I2C1 pins using I2C_FASTMODEPLUS_I2C1 parameter or independently - * on each one of the following pins PB6, PB7, PB8 and PB9. - * @note For remaining I2C1 pins (PA14, PA15...) fast mode plus driving capability - * can be enabled only by using I2C_FASTMODEPLUS_I2C1 parameter. - * @note For all I2C2 pins fast mode plus driving capability can be enabled - * only by using I2C_FASTMODEPLUS_I2C2 parameter. - * @note For all I2C3 pins fast mode plus driving capability can be enabled - * only by using I2C_FASTMODEPLUS_I2C3 parameter. - * @note For all I2C4 pins fast mode plus driving capability can be enabled - * only by using I2C_FASTMODEPLUS_I2C4 parameter. - * @retval None - */ -void HAL_I2CEx_EnableFastModePlus(uint32_t ConfigFastModePlus) -{ - /* Check the parameter */ - assert_param(IS_I2C_FASTMODEPLUS(ConfigFastModePlus)); - - /* Enable SYSCFG clock */ - __HAL_RCC_SYSCFG_CLK_ENABLE(); - - /* Enable fast mode plus driving capability for selected pin */ - SET_BIT(SYSCFG->CFGR1, (uint32_t)ConfigFastModePlus); -} - -/** - * @brief Disable the I2C fast mode plus driving capability. - * @param ConfigFastModePlus Selects the pin. - * This parameter can be one of the @ref I2CEx_FastModePlus values - * @note For I2C1, fast mode plus driving capability can be disabled on all selected - * I2C1 pins using I2C_FASTMODEPLUS_I2C1 parameter or independently - * on each one of the following pins PB6, PB7, PB8 and PB9. - * @note For remaining I2C1 pins (PA14, PA15...) fast mode plus driving capability - * can be disabled only by using I2C_FASTMODEPLUS_I2C1 parameter. - * @note For all I2C2 pins fast mode plus driving capability can be disabled - * only by using I2C_FASTMODEPLUS_I2C2 parameter. - * @note For all I2C3 pins fast mode plus driving capability can be disabled - * only by using I2C_FASTMODEPLUS_I2C3 parameter. - * @note For all I2C4 pins fast mode plus driving capability can be disabled - * only by using I2C_FASTMODEPLUS_I2C4 parameter. - * @retval None - */ -void HAL_I2CEx_DisableFastModePlus(uint32_t ConfigFastModePlus) -{ - /* Check the parameter */ - assert_param(IS_I2C_FASTMODEPLUS(ConfigFastModePlus)); - - /* Enable SYSCFG clock */ - __HAL_RCC_SYSCFG_CLK_ENABLE(); - - /* Disable fast mode plus driving capability for selected pin */ - CLEAR_BIT(SYSCFG->CFGR1, (uint32_t)ConfigFastModePlus); -} -/** - * @} - */ -/** - * @} - */ - -#endif /* HAL_I2C_MODULE_ENABLED */ -/** - * @} - */ - -/** - * @} - */ +/** + ****************************************************************************** + * @file stm32l4xx_hal_i2c_ex.c + * @author MCD Application Team + * @brief I2C Extended HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of I2C Extended peripheral: + * + Filter Mode Functions + * + WakeUp Mode Functions + * + FastModePlus Functions + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### I2C peripheral Extended features ##### + ============================================================================== + + [..] Comparing to other previous devices, the I2C interface for STM32L4xx + devices contains the following additional features + + (+) Possibility to disable or enable Analog Noise Filter + (+) Use of a configured Digital Noise Filter + (+) Disable or enable wakeup from Stop mode(s) + (+) Disable or enable Fast Mode Plus + + ##### How to use this driver ##### + ============================================================================== + [..] This driver provides functions to configure Noise Filter and Wake Up Feature + (#) Configure I2C Analog noise filter using the function HAL_I2CEx_ConfigAnalogFilter() + (#) Configure I2C Digital noise filter using the function HAL_I2CEx_ConfigDigitalFilter() + (#) Configure the enable or disable of I2C Wake Up Mode using the functions : + (++) HAL_I2CEx_EnableWakeUp() + (++) HAL_I2CEx_DisableWakeUp() + (#) Configure the enable or disable of fast mode plus driving capability using the functions : + (++) HAL_I2CEx_EnableFastModePlus() + (++) HAL_I2CEx_DisableFastModePlus() + @endverbatim + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l4xx_hal.h" + +/** @addtogroup STM32L4xx_HAL_Driver + * @{ + */ + +/** @defgroup I2CEx I2CEx + * @brief I2C Extended HAL module driver + * @{ + */ + +#ifdef HAL_I2C_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ + +/** @defgroup I2CEx_Exported_Functions I2C Extended Exported Functions + * @{ + */ + +/** @defgroup I2CEx_Exported_Functions_Group1 Filter Mode Functions + * @brief Filter Mode Functions + * +@verbatim + =============================================================================== + ##### Filter Mode Functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Configure Noise Filters + +@endverbatim + * @{ + */ + +/** + * @brief Configure I2C Analog noise filter. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2Cx peripheral. + * @param AnalogFilter New state of the Analog filter. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2CEx_ConfigAnalogFilter(I2C_HandleTypeDef *hi2c, uint32_t AnalogFilter) +{ + /* Check the parameters */ + assert_param(IS_I2C_ALL_INSTANCE(hi2c->Instance)); + assert_param(IS_I2C_ANALOG_FILTER(AnalogFilter)); + + if (hi2c->State == HAL_I2C_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY; + + /* Disable the selected I2C peripheral */ + __HAL_I2C_DISABLE(hi2c); + + /* Reset I2Cx ANOFF bit */ + hi2c->Instance->CR1 &= ~(I2C_CR1_ANFOFF); + + /* Set analog filter bit*/ + hi2c->Instance->CR1 |= AnalogFilter; + + __HAL_I2C_ENABLE(hi2c); + + hi2c->State = HAL_I2C_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Configure I2C Digital noise filter. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2Cx peripheral. + * @param DigitalFilter Coefficient of digital noise filter between Min_Data=0x00 and Max_Data=0x0F. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2CEx_ConfigDigitalFilter(I2C_HandleTypeDef *hi2c, uint32_t DigitalFilter) +{ + uint32_t tmpreg; + + /* Check the parameters */ + assert_param(IS_I2C_ALL_INSTANCE(hi2c->Instance)); + assert_param(IS_I2C_DIGITAL_FILTER(DigitalFilter)); + + if (hi2c->State == HAL_I2C_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY; + + /* Disable the selected I2C peripheral */ + __HAL_I2C_DISABLE(hi2c); + + /* Get the old register value */ + tmpreg = hi2c->Instance->CR1; + + /* Reset I2Cx DNF bits [11:8] */ + tmpreg &= ~(I2C_CR1_DNF); + + /* Set I2Cx DNF coefficient */ + tmpreg |= DigitalFilter << 8U; + + /* Store the new register value */ + hi2c->Instance->CR1 = tmpreg; + + __HAL_I2C_ENABLE(hi2c); + + hi2c->State = HAL_I2C_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} +/** + * @} + */ + +/** @defgroup I2CEx_Exported_Functions_Group2 WakeUp Mode Functions + * @brief WakeUp Mode Functions + * +@verbatim + =============================================================================== + ##### WakeUp Mode Functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Configure Wake Up Feature + +@endverbatim + * @{ + */ + +/** + * @brief Enable I2C wakeup from Stop mode(s). + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2Cx peripheral. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2CEx_EnableWakeUp(I2C_HandleTypeDef *hi2c) +{ + /* Check the parameters */ + assert_param(IS_I2C_WAKEUP_FROMSTOP_INSTANCE(hi2c->Instance)); + + if (hi2c->State == HAL_I2C_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY; + + /* Disable the selected I2C peripheral */ + __HAL_I2C_DISABLE(hi2c); + + /* Enable wakeup from stop mode */ + hi2c->Instance->CR1 |= I2C_CR1_WUPEN; + + __HAL_I2C_ENABLE(hi2c); + + hi2c->State = HAL_I2C_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Disable I2C wakeup from Stop mode(s). + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2Cx peripheral. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2CEx_DisableWakeUp(I2C_HandleTypeDef *hi2c) +{ + /* Check the parameters */ + assert_param(IS_I2C_WAKEUP_FROMSTOP_INSTANCE(hi2c->Instance)); + + if (hi2c->State == HAL_I2C_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY; + + /* Disable the selected I2C peripheral */ + __HAL_I2C_DISABLE(hi2c); + + /* Enable wakeup from stop mode */ + hi2c->Instance->CR1 &= ~(I2C_CR1_WUPEN); + + __HAL_I2C_ENABLE(hi2c); + + hi2c->State = HAL_I2C_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} +/** + * @} + */ + +/** @defgroup I2CEx_Exported_Functions_Group3 Fast Mode Plus Functions + * @brief Fast Mode Plus Functions + * +@verbatim + =============================================================================== + ##### Fast Mode Plus Functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Configure Fast Mode Plus + +@endverbatim + * @{ + */ + +/** + * @brief Enable the I2C fast mode plus driving capability. + * @param ConfigFastModePlus Selects the pin. + * This parameter can be one of the @ref I2CEx_FastModePlus values + * @note For I2C1, fast mode plus driving capability can be enabled on all selected + * I2C1 pins using I2C_FASTMODEPLUS_I2C1 parameter or independently + * on each one of the following pins PB6, PB7, PB8 and PB9. + * @note For remaining I2C1 pins (PA14, PA15...) fast mode plus driving capability + * can be enabled only by using I2C_FASTMODEPLUS_I2C1 parameter. + * @note For all I2C2 pins fast mode plus driving capability can be enabled + * only by using I2C_FASTMODEPLUS_I2C2 parameter. + * @note For all I2C3 pins fast mode plus driving capability can be enabled + * only by using I2C_FASTMODEPLUS_I2C3 parameter. + * @note For all I2C4 pins fast mode plus driving capability can be enabled + * only by using I2C_FASTMODEPLUS_I2C4 parameter. + * @retval None + */ +void HAL_I2CEx_EnableFastModePlus(uint32_t ConfigFastModePlus) +{ + /* Check the parameter */ + assert_param(IS_I2C_FASTMODEPLUS(ConfigFastModePlus)); + + /* Enable SYSCFG clock */ + __HAL_RCC_SYSCFG_CLK_ENABLE(); + + /* Enable fast mode plus driving capability for selected pin */ + SET_BIT(SYSCFG->CFGR1, (uint32_t)ConfigFastModePlus); +} + +/** + * @brief Disable the I2C fast mode plus driving capability. + * @param ConfigFastModePlus Selects the pin. + * This parameter can be one of the @ref I2CEx_FastModePlus values + * @note For I2C1, fast mode plus driving capability can be disabled on all selected + * I2C1 pins using I2C_FASTMODEPLUS_I2C1 parameter or independently + * on each one of the following pins PB6, PB7, PB8 and PB9. + * @note For remaining I2C1 pins (PA14, PA15...) fast mode plus driving capability + * can be disabled only by using I2C_FASTMODEPLUS_I2C1 parameter. + * @note For all I2C2 pins fast mode plus driving capability can be disabled + * only by using I2C_FASTMODEPLUS_I2C2 parameter. + * @note For all I2C3 pins fast mode plus driving capability can be disabled + * only by using I2C_FASTMODEPLUS_I2C3 parameter. + * @note For all I2C4 pins fast mode plus driving capability can be disabled + * only by using I2C_FASTMODEPLUS_I2C4 parameter. + * @retval None + */ +void HAL_I2CEx_DisableFastModePlus(uint32_t ConfigFastModePlus) +{ + /* Check the parameter */ + assert_param(IS_I2C_FASTMODEPLUS(ConfigFastModePlus)); + + /* Enable SYSCFG clock */ + __HAL_RCC_SYSCFG_CLK_ENABLE(); + + /* Disable fast mode plus driving capability for selected pin */ + CLEAR_BIT(SYSCFG->CFGR1, (uint32_t)ConfigFastModePlus); +} +/** + * @} + */ +/** + * @} + */ + +#endif /* HAL_I2C_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ diff --git a/CablePositioning_IAP_V1.0/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr.c b/CablePositioning_IAP_V1.0/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr.c index 688c3b7..8638eec 100644 --- a/CablePositioning_IAP_V1.0/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr.c +++ b/CablePositioning_IAP_V1.0/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr.c @@ -1,658 +1,658 @@ -/** - ****************************************************************************** - * @file stm32l4xx_hal_pwr.c - * @author MCD Application Team - * @brief PWR HAL module driver. - * This file provides firmware functions to manage the following - * functionalities of the Power Controller (PWR) peripheral: - * + Initialization/de-initialization functions - * + Peripheral Control functions - * - ****************************************************************************** - * @attention - * - * Copyright (c) 2019 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32l4xx_hal.h" - -/** @addtogroup STM32L4xx_HAL_Driver - * @{ - */ - -/** @defgroup PWR PWR - * @brief PWR HAL module driver - * @{ - */ - -#ifdef HAL_PWR_MODULE_ENABLED - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ - -/** @defgroup PWR_Private_Defines PWR Private Defines - * @{ - */ - -/** @defgroup PWR_PVD_Mode_Mask PWR PVD Mode Mask - * @{ - */ -#define PVD_MODE_IT ((uint32_t)0x00010000) /*!< Mask for interruption yielded by PVD threshold crossing */ -#define PVD_MODE_EVT ((uint32_t)0x00020000) /*!< Mask for event yielded by PVD threshold crossing */ -#define PVD_RISING_EDGE ((uint32_t)0x00000001) /*!< Mask for rising edge set as PVD trigger */ -#define PVD_FALLING_EDGE ((uint32_t)0x00000002) /*!< Mask for falling edge set as PVD trigger */ -/** - * @} - */ - -/** - * @} - */ - -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ -/* Exported functions --------------------------------------------------------*/ - -/** @defgroup PWR_Exported_Functions PWR Exported Functions - * @{ - */ - -/** @defgroup PWR_Exported_Functions_Group1 Initialization and de-initialization functions - * @brief Initialization and de-initialization functions - * -@verbatim - =============================================================================== - ##### Initialization and de-initialization functions ##### - =============================================================================== - [..] - -@endverbatim - * @{ - */ - -/** - * @brief Deinitialize the HAL PWR peripheral registers to their default reset values. - * @retval None - */ -void HAL_PWR_DeInit(void) -{ - __HAL_RCC_PWR_FORCE_RESET(); - __HAL_RCC_PWR_RELEASE_RESET(); -} - -/** - * @brief Enable access to the backup domain - * (RTC registers, RTC backup data registers). - * @note After reset, the backup domain is protected against - * possible unwanted write accesses. - * @note RTCSEL that sets the RTC clock source selection is in the RTC back-up domain. - * In order to set or modify the RTC clock, the backup domain access must be - * disabled. - * @note LSEON bit that switches on and off the LSE crystal belongs as well to the - * back-up domain. - * @retval None - */ -void HAL_PWR_EnableBkUpAccess(void) -{ - SET_BIT(PWR->CR1, PWR_CR1_DBP); -} - -/** - * @brief Disable access to the backup domain - * (RTC registers, RTC backup data registers). - * @retval None - */ -void HAL_PWR_DisableBkUpAccess(void) -{ - CLEAR_BIT(PWR->CR1, PWR_CR1_DBP); -} - - - - -/** - * @} - */ - - - -/** @defgroup PWR_Exported_Functions_Group2 Peripheral Control functions - * @brief Low Power modes configuration functions - * -@verbatim - - =============================================================================== - ##### Peripheral Control functions ##### - =============================================================================== - - [..] - *** PVD configuration *** - ========================= - [..] - (+) The PVD is used to monitor the VDD power supply by comparing it to a - threshold selected by the PVD Level (PLS[2:0] bits in PWR_CR2 register). - - (+) PVDO flag is available to indicate if VDD/VDDA is higher or lower - than the PVD threshold. This event is internally connected to the EXTI - line16 and can generate an interrupt if enabled. This is done through - __HAL_PVD_EXTI_ENABLE_IT() macro. - (+) The PVD is stopped in Standby mode. - - - *** WakeUp pin configuration *** - ================================ - [..] - (+) WakeUp pins are used to wakeup the system from Standby mode or Shutdown mode. - The polarity of these pins can be set to configure event detection on high - level (rising edge) or low level (falling edge). - - - - *** Low Power modes configuration *** - ===================================== - [..] - The devices feature 8 low-power modes: - (+) Low-power Run mode: core and peripherals are running, main regulator off, low power regulator on. - (+) Sleep mode: Cortex-M4 core stopped, peripherals kept running, main and low power regulators on. - (+) Low-power Sleep mode: Cortex-M4 core stopped, peripherals kept running, main regulator off, low power regulator on. - (+) Stop 0 mode: all clocks are stopped except LSI and LSE, main and low power regulators on. - (+) Stop 1 mode: all clocks are stopped except LSI and LSE, main regulator off, low power regulator on. - (+) Stop 2 mode: all clocks are stopped except LSI and LSE, main regulator off, low power regulator on, reduced set of waking up IPs compared to Stop 1 mode. - (+) Standby mode with SRAM2: all clocks are stopped except LSI and LSE, SRAM2 content preserved, main regulator off, low power regulator on. - (+) Standby mode without SRAM2: all clocks are stopped except LSI and LSE, main and low power regulators off. - (+) Shutdown mode: all clocks are stopped except LSE, main and low power regulators off. - - - *** Low-power run mode *** - ========================== - [..] - (+) Entry: (from main run mode) - (++) set LPR bit with HAL_PWREx_EnableLowPowerRunMode() API after having decreased the system clock below 2 MHz. - - (+) Exit: - (++) clear LPR bit then wait for REGLP bit to be reset with HAL_PWREx_DisableLowPowerRunMode() API. Only - then can the system clock frequency be increased above 2 MHz. - - - *** Sleep mode / Low-power sleep mode *** - ========================================= - [..] - (+) Entry: - The Sleep mode / Low-power Sleep mode is entered thru HAL_PWR_EnterSLEEPMode() API - in specifying whether or not the regulator is forced to low-power mode and if exit is interrupt or event-triggered. - (++) PWR_MAINREGULATOR_ON: Sleep mode (regulator in main mode). - (++) PWR_LOWPOWERREGULATOR_ON: Low-power sleep (regulator in low power mode). - In the latter case, the system clock frequency must have been decreased below 2 MHz beforehand. - (++) PWR_SLEEPENTRY_WFI: enter SLEEP mode with WFI instruction - (++) PWR_SLEEPENTRY_WFE: enter SLEEP mode with WFE instruction - - (+) WFI Exit: - (++) Any peripheral interrupt acknowledged by the nested vectored interrupt - controller (NVIC) or any wake-up event. - - (+) WFE Exit: - (++) Any wake-up event such as an EXTI line configured in event mode. - - [..] When exiting the Low-power sleep mode by issuing an interrupt or a wakeup event, - the MCU is in Low-power Run mode. - - *** Stop 0, Stop 1 and Stop 2 modes *** - =============================== - [..] - (+) Entry: - The Stop 0, Stop 1 or Stop 2 modes are entered thru the following API's: - (++) HAL_PWREx_EnterSTOP0Mode() for mode 0 or HAL_PWREx_EnterSTOP1Mode() for mode 1 or for porting reasons HAL_PWR_EnterSTOPMode(). - (++) HAL_PWREx_EnterSTOP2Mode() for mode 2. - (+) Regulator setting (applicable to HAL_PWR_EnterSTOPMode() only): - (++) PWR_MAINREGULATOR_ON - (++) PWR_LOWPOWERREGULATOR_ON - (+) Exit (interrupt or event-triggered, specified when entering STOP mode): - (++) PWR_STOPENTRY_WFI: enter Stop mode with WFI instruction - (++) PWR_STOPENTRY_WFE: enter Stop mode with WFE instruction - - (+) WFI Exit: - (++) Any EXTI Line (Internal or External) configured in Interrupt mode. - (++) Some specific communication peripherals (USART, LPUART, I2C) interrupts - when programmed in wakeup mode. - (+) WFE Exit: - (++) Any EXTI Line (Internal or External) configured in Event mode. - - [..] - When exiting Stop 0 and Stop 1 modes, the MCU is either in Run mode or in Low-power Run mode - depending on the LPR bit setting. - When exiting Stop 2 mode, the MCU is in Run mode. - - *** Standby mode *** - ==================== - [..] - The Standby mode offers two options: - (+) option a) all clocks off except LSI and LSE, RRS bit set (keeps voltage regulator in low power mode). - SRAM and registers contents are lost except for the SRAM2 content, the RTC registers, RTC backup registers - and Standby circuitry. - (+) option b) all clocks off except LSI and LSE, RRS bit cleared (voltage regulator then disabled). - SRAM and register contents are lost except for the RTC registers, RTC backup registers - and Standby circuitry. - - (++) Entry: - (+++) The Standby mode is entered thru HAL_PWR_EnterSTANDBYMode() API. - SRAM1 and register contents are lost except for registers in the Backup domain and - Standby circuitry. SRAM2 content can be preserved if the bit RRS is set in PWR_CR3 register. - To enable this feature, the user can resort to HAL_PWREx_EnableSRAM2ContentRetention() API - to set RRS bit. - - (++) Exit: - (+++) WKUP pin rising edge, RTC alarm or wakeup, tamper event, time-stamp event, - external reset in NRST pin, IWDG reset. - - [..] After waking up from Standby mode, program execution restarts in the same way as after a Reset. - - - *** Shutdown mode *** - ====================== - [..] - In Shutdown mode, - voltage regulator is disabled, all clocks are off except LSE, RRS bit is cleared. - SRAM and registers contents are lost except for backup domain registers. - - (+) Entry: - The Shutdown mode is entered thru HAL_PWREx_EnterSHUTDOWNMode() API. - - (+) Exit: - (++) WKUP pin rising edge, RTC alarm or wakeup, tamper event, time-stamp event, - external reset in NRST pin. - - [..] After waking up from Shutdown mode, program execution restarts in the same way as after a Reset. - - - *** Auto-wakeup (AWU) from low-power mode *** - ============================================= - [..] - The MCU can be woken up from low-power mode by an RTC Alarm event, an RTC - Wakeup event, a tamper event or a time-stamp event, without depending on - an external interrupt (Auto-wakeup mode). - - (+) RTC auto-wakeup (AWU) from the Stop, Standby and Shutdown modes - - - (++) To wake up from the Stop mode with an RTC alarm event, it is necessary to - configure the RTC to generate the RTC alarm using the HAL_RTC_SetAlarm_IT() function. - - (++) To wake up from the Stop mode with an RTC Tamper or time stamp event, it - is necessary to configure the RTC to detect the tamper or time stamp event using the - HAL_RTCEx_SetTimeStamp_IT() or HAL_RTCEx_SetTamper_IT() functions. - - (++) To wake up from the Stop mode with an RTC WakeUp event, it is necessary to - configure the RTC to generate the RTC WakeUp event using the HAL_RTCEx_SetWakeUpTimer_IT() function. - -@endverbatim - * @{ - */ - - - -/** - * @brief Configure the voltage threshold detected by the Power Voltage Detector (PVD). - * @param sConfigPVD: pointer to a PWR_PVDTypeDef structure that contains the PVD - * configuration information. - * @note Refer to the electrical characteristics of your device datasheet for - * more details about the voltage thresholds corresponding to each - * detection level. - * @retval None - */ -HAL_StatusTypeDef HAL_PWR_ConfigPVD(PWR_PVDTypeDef *sConfigPVD) -{ - /* Check the parameters */ - assert_param(IS_PWR_PVD_LEVEL(sConfigPVD->PVDLevel)); - assert_param(IS_PWR_PVD_MODE(sConfigPVD->Mode)); - - /* Set PLS bits according to PVDLevel value */ - MODIFY_REG(PWR->CR2, PWR_CR2_PLS, sConfigPVD->PVDLevel); - - /* Clear any previous config. Keep it clear if no event or IT mode is selected */ - __HAL_PWR_PVD_EXTI_DISABLE_EVENT(); - __HAL_PWR_PVD_EXTI_DISABLE_IT(); - __HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE(); - __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE(); - - /* Configure interrupt mode */ - if((sConfigPVD->Mode & PVD_MODE_IT) == PVD_MODE_IT) - { - __HAL_PWR_PVD_EXTI_ENABLE_IT(); - } - - /* Configure event mode */ - if((sConfigPVD->Mode & PVD_MODE_EVT) == PVD_MODE_EVT) - { - __HAL_PWR_PVD_EXTI_ENABLE_EVENT(); - } - - /* Configure the edge */ - if((sConfigPVD->Mode & PVD_RISING_EDGE) == PVD_RISING_EDGE) - { - __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE(); - } - - if((sConfigPVD->Mode & PVD_FALLING_EDGE) == PVD_FALLING_EDGE) - { - __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE(); - } - - return HAL_OK; -} - - -/** - * @brief Enable the Power Voltage Detector (PVD). - * @retval None - */ -void HAL_PWR_EnablePVD(void) -{ - SET_BIT(PWR->CR2, PWR_CR2_PVDE); -} - -/** - * @brief Disable the Power Voltage Detector (PVD). - * @retval None - */ -void HAL_PWR_DisablePVD(void) -{ - CLEAR_BIT(PWR->CR2, PWR_CR2_PVDE); -} - - - - -/** - * @brief Enable the WakeUp PINx functionality. - * @param WakeUpPinPolarity: Specifies which Wake-Up pin to enable. - * This parameter can be one of the following legacy values which set the default polarity - * i.e. detection on high level (rising edge): - * @arg @ref PWR_WAKEUP_PIN1, PWR_WAKEUP_PIN2, PWR_WAKEUP_PIN3, PWR_WAKEUP_PIN4, PWR_WAKEUP_PIN5 - * - * or one of the following value where the user can explicitly specify the enabled pin and - * the chosen polarity: - * @arg @ref PWR_WAKEUP_PIN1_HIGH or PWR_WAKEUP_PIN1_LOW - * @arg @ref PWR_WAKEUP_PIN2_HIGH or PWR_WAKEUP_PIN2_LOW - * @arg @ref PWR_WAKEUP_PIN3_HIGH or PWR_WAKEUP_PIN3_LOW - * @arg @ref PWR_WAKEUP_PIN4_HIGH or PWR_WAKEUP_PIN4_LOW - * @arg @ref PWR_WAKEUP_PIN5_HIGH or PWR_WAKEUP_PIN5_LOW - * @note PWR_WAKEUP_PINx and PWR_WAKEUP_PINx_HIGH are equivalent. - * @retval None - */ -void HAL_PWR_EnableWakeUpPin(uint32_t WakeUpPinPolarity) -{ - assert_param(IS_PWR_WAKEUP_PIN(WakeUpPinPolarity)); - - /* Specifies the Wake-Up pin polarity for the event detection - (rising or falling edge) */ - MODIFY_REG(PWR->CR4, (PWR_CR3_EWUP & WakeUpPinPolarity), (WakeUpPinPolarity >> PWR_WUP_POLARITY_SHIFT)); - - /* Enable wake-up pin */ - SET_BIT(PWR->CR3, (PWR_CR3_EWUP & WakeUpPinPolarity)); - - -} - -/** - * @brief Disable the WakeUp PINx functionality. - * @param WakeUpPinx: Specifies the Power Wake-Up pin to disable. - * This parameter can be one of the following values: - * @arg @ref PWR_WAKEUP_PIN1, PWR_WAKEUP_PIN2, PWR_WAKEUP_PIN3, PWR_WAKEUP_PIN4, PWR_WAKEUP_PIN5 - * @retval None - */ -void HAL_PWR_DisableWakeUpPin(uint32_t WakeUpPinx) -{ - assert_param(IS_PWR_WAKEUP_PIN(WakeUpPinx)); - - CLEAR_BIT(PWR->CR3, (PWR_CR3_EWUP & WakeUpPinx)); -} - - -/** - * @brief Enter Sleep or Low-power Sleep mode. - * @note In Sleep/Low-power Sleep mode, all I/O pins keep the same state as in Run mode. - * @param Regulator: Specifies the regulator state in Sleep/Low-power Sleep mode. - * This parameter can be one of the following values: - * @arg @ref PWR_MAINREGULATOR_ON Sleep mode (regulator in main mode) - * @arg @ref PWR_LOWPOWERREGULATOR_ON Low-power Sleep mode (regulator in low-power mode) - * @note Low-power Sleep mode is entered from Low-power Run mode. Therefore, if not yet - * in Low-power Run mode before calling HAL_PWR_EnterSLEEPMode() with Regulator set - * to PWR_LOWPOWERREGULATOR_ON, the user can optionally configure the - * Flash in power-down monde in setting the SLEEP_PD bit in FLASH_ACR register. - * Additionally, the clock frequency must be reduced below 2 MHz. - * Setting SLEEP_PD in FLASH_ACR then appropriately reducing the clock frequency must - * be done before calling HAL_PWR_EnterSLEEPMode() API. - * @note When exiting Low-power Sleep mode, the MCU is in Low-power Run mode. To move in - * Run mode, the user must resort to HAL_PWREx_DisableLowPowerRunMode() API. - * @param SLEEPEntry: Specifies if Sleep mode is entered with WFI or WFE instruction. - * This parameter can be one of the following values: - * @arg @ref PWR_SLEEPENTRY_WFI enter Sleep or Low-power Sleep mode with WFI instruction - * @arg @ref PWR_SLEEPENTRY_WFE enter Sleep or Low-power Sleep mode with WFE instruction - * @note When WFI entry is used, tick interrupt have to be disabled if not desired as - * the interrupt wake up source. - * @retval None - */ -void HAL_PWR_EnterSLEEPMode(uint32_t Regulator, uint8_t SLEEPEntry) -{ - /* Check the parameters */ - assert_param(IS_PWR_REGULATOR(Regulator)); - assert_param(IS_PWR_SLEEP_ENTRY(SLEEPEntry)); - - /* Set Regulator parameter */ - if (Regulator == PWR_MAINREGULATOR_ON) - { - /* If in low-power run mode at this point, exit it */ - if (HAL_IS_BIT_SET(PWR->SR2, PWR_SR2_REGLPF)) - { - if (HAL_PWREx_DisableLowPowerRunMode() != HAL_OK) - { - return ; - } - } - /* Regulator now in main mode. */ - } - else - { - /* If in run mode, first move to low-power run mode. - The system clock frequency must be below 2 MHz at this point. */ - if (HAL_IS_BIT_SET(PWR->SR2, PWR_SR2_REGLPF) == RESET) - { - HAL_PWREx_EnableLowPowerRunMode(); - } - } - - /* Clear SLEEPDEEP bit of Cortex System Control Register */ - CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk)); - - /* Select SLEEP mode entry -------------------------------------------------*/ - if(SLEEPEntry == PWR_SLEEPENTRY_WFI) - { - /* Request Wait For Interrupt */ - __WFI(); - } - else - { - /* Request Wait For Event */ - __SEV(); - __WFE(); - __WFE(); - } - -} - - -/** - * @brief Enter Stop mode - * @note This API is named HAL_PWR_EnterSTOPMode to ensure compatibility with legacy code running - * on devices where only "Stop mode" is mentioned with main or low power regulator ON. - * @note In Stop mode, all I/O pins keep the same state as in Run mode. - * @note All clocks in the VCORE domain are stopped; the PLL, the MSI, - * the HSI and the HSE oscillators are disabled. Some peripherals with the wakeup capability - * (I2Cx, USARTx and LPUART) can switch on the HSI to receive a frame, and switch off the HSI - * after receiving the frame if it is not a wakeup frame. In this case, the HSI clock is propagated - * only to the peripheral requesting it. - * SRAM1, SRAM2 and register contents are preserved. - * The BOR is available. - * The voltage regulator can be configured either in normal (Stop 0) or low-power mode (Stop 1). - * @note When exiting Stop 0 or Stop 1 mode by issuing an interrupt or a wakeup event, - * the HSI RC oscillator is selected as system clock if STOPWUCK bit in RCC_CFGR register - * is set; the MSI oscillator is selected if STOPWUCK is cleared. - * @note When the voltage regulator operates in low power mode (Stop 1), an additional - * startup delay is incurred when waking up. - * By keeping the internal regulator ON during Stop mode (Stop 0), the consumption - * is higher although the startup time is reduced. - * @param Regulator: Specifies the regulator state in Stop mode. - * This parameter can be one of the following values: - * @arg @ref PWR_MAINREGULATOR_ON Stop 0 mode (main regulator ON) - * @arg @ref PWR_LOWPOWERREGULATOR_ON Stop 1 mode (low power regulator ON) - * @param STOPEntry: Specifies Stop 0 or Stop 1 mode is entered with WFI or WFE instruction. - * This parameter can be one of the following values: - * @arg @ref PWR_STOPENTRY_WFI Enter Stop 0 or Stop 1 mode with WFI instruction. - * @arg @ref PWR_STOPENTRY_WFE Enter Stop 0 or Stop 1 mode with WFE instruction. - * @retval None - */ -void HAL_PWR_EnterSTOPMode(uint32_t Regulator, uint8_t STOPEntry) -{ - /* Check the parameters */ - assert_param(IS_PWR_REGULATOR(Regulator)); - - if(Regulator == PWR_LOWPOWERREGULATOR_ON) - { - HAL_PWREx_EnterSTOP1Mode(STOPEntry); - } - else - { - HAL_PWREx_EnterSTOP0Mode(STOPEntry); - } -} - -/** - * @brief Enter Standby mode. - * @note In Standby mode, the PLL, the HSI, the MSI and the HSE oscillators are switched - * off. The voltage regulator is disabled, except when SRAM2 content is preserved - * in which case the regulator is in low-power mode. - * SRAM1 and register contents are lost except for registers in the Backup domain and - * Standby circuitry. SRAM2 content can be preserved if the bit RRS is set in PWR_CR3 register. - * To enable this feature, the user can resort to HAL_PWREx_EnableSRAM2ContentRetention() API - * to set RRS bit. - * The BOR is available. - * @note The I/Os can be configured either with a pull-up or pull-down or can be kept in analog state. - * HAL_PWREx_EnableGPIOPullUp() and HAL_PWREx_EnableGPIOPullDown() respectively enable Pull Up and - * Pull Down state, HAL_PWREx_DisableGPIOPullUp() and HAL_PWREx_DisableGPIOPullDown() disable the - * same. - * These states are effective in Standby mode only if APC bit is set through - * HAL_PWREx_EnablePullUpPullDownConfig() API. - * @retval None - */ -void HAL_PWR_EnterSTANDBYMode(void) -{ - /* Set Stand-by mode */ - MODIFY_REG(PWR->CR1, PWR_CR1_LPMS, PWR_CR1_LPMS_STANDBY); - - /* Set SLEEPDEEP bit of Cortex System Control Register */ - SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk)); - -/* This option is used to ensure that store operations are completed */ -#if defined ( __CC_ARM) - __force_stores(); -#endif - /* Request Wait For Interrupt */ - __WFI(); -} - - - -/** - * @brief Indicate Sleep-On-Exit when returning from Handler mode to Thread mode. - * @note Set SLEEPONEXIT bit of SCR register. When this bit is set, the processor - * re-enters SLEEP mode when an interruption handling is over. - * Setting this bit is useful when the processor is expected to run only on - * interruptions handling. - * @retval None - */ -void HAL_PWR_EnableSleepOnExit(void) -{ - /* Set SLEEPONEXIT bit of Cortex System Control Register */ - SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPONEXIT_Msk)); -} - - -/** - * @brief Disable Sleep-On-Exit feature when returning from Handler mode to Thread mode. - * @note Clear SLEEPONEXIT bit of SCR register. When this bit is set, the processor - * re-enters SLEEP mode when an interruption handling is over. - * @retval None - */ -void HAL_PWR_DisableSleepOnExit(void) -{ - /* Clear SLEEPONEXIT bit of Cortex System Control Register */ - CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPONEXIT_Msk)); -} - - - -/** - * @brief Enable CORTEX M4 SEVONPEND bit. - * @note Set SEVONPEND bit of SCR register. When this bit is set, this causes - * WFE to wake up when an interrupt moves from inactive to pended. - * @retval None - */ -void HAL_PWR_EnableSEVOnPend(void) -{ - /* Set SEVONPEND bit of Cortex System Control Register */ - SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SEVONPEND_Msk)); -} - - -/** - * @brief Disable CORTEX M4 SEVONPEND bit. - * @note Clear SEVONPEND bit of SCR register. When this bit is set, this causes - * WFE to wake up when an interrupt moves from inactive to pended. - * @retval None - */ -void HAL_PWR_DisableSEVOnPend(void) -{ - /* Clear SEVONPEND bit of Cortex System Control Register */ - CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SEVONPEND_Msk)); -} - - - - - -/** - * @brief PWR PVD interrupt callback - * @retval None - */ -__weak void HAL_PWR_PVDCallback(void) -{ - /* NOTE : This function should not be modified; when the callback is needed, - the HAL_PWR_PVDCallback can be implemented in the user file - */ -} - -/** - * @} - */ - -/** - * @} - */ - -#endif /* HAL_PWR_MODULE_ENABLED */ -/** - * @} - */ - -/** - * @} - */ +/** + ****************************************************************************** + * @file stm32l4xx_hal_pwr.c + * @author MCD Application Team + * @brief PWR HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Power Controller (PWR) peripheral: + * + Initialization/de-initialization functions + * + Peripheral Control functions + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2019 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l4xx_hal.h" + +/** @addtogroup STM32L4xx_HAL_Driver + * @{ + */ + +/** @defgroup PWR PWR + * @brief PWR HAL module driver + * @{ + */ + +#ifdef HAL_PWR_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ + +/** @defgroup PWR_Private_Defines PWR Private Defines + * @{ + */ + +/** @defgroup PWR_PVD_Mode_Mask PWR PVD Mode Mask + * @{ + */ +#define PVD_MODE_IT ((uint32_t)0x00010000) /*!< Mask for interruption yielded by PVD threshold crossing */ +#define PVD_MODE_EVT ((uint32_t)0x00020000) /*!< Mask for event yielded by PVD threshold crossing */ +#define PVD_RISING_EDGE ((uint32_t)0x00000001) /*!< Mask for rising edge set as PVD trigger */ +#define PVD_FALLING_EDGE ((uint32_t)0x00000002) /*!< Mask for falling edge set as PVD trigger */ +/** + * @} + */ + +/** + * @} + */ + +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup PWR_Exported_Functions PWR Exported Functions + * @{ + */ + +/** @defgroup PWR_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and de-initialization functions + * +@verbatim + =============================================================================== + ##### Initialization and de-initialization functions ##### + =============================================================================== + [..] + +@endverbatim + * @{ + */ + +/** + * @brief Deinitialize the HAL PWR peripheral registers to their default reset values. + * @retval None + */ +void HAL_PWR_DeInit(void) +{ + __HAL_RCC_PWR_FORCE_RESET(); + __HAL_RCC_PWR_RELEASE_RESET(); +} + +/** + * @brief Enable access to the backup domain + * (RTC registers, RTC backup data registers). + * @note After reset, the backup domain is protected against + * possible unwanted write accesses. + * @note RTCSEL that sets the RTC clock source selection is in the RTC back-up domain. + * In order to set or modify the RTC clock, the backup domain access must be + * disabled. + * @note LSEON bit that switches on and off the LSE crystal belongs as well to the + * back-up domain. + * @retval None + */ +void HAL_PWR_EnableBkUpAccess(void) +{ + SET_BIT(PWR->CR1, PWR_CR1_DBP); +} + +/** + * @brief Disable access to the backup domain + * (RTC registers, RTC backup data registers). + * @retval None + */ +void HAL_PWR_DisableBkUpAccess(void) +{ + CLEAR_BIT(PWR->CR1, PWR_CR1_DBP); +} + + + + +/** + * @} + */ + + + +/** @defgroup PWR_Exported_Functions_Group2 Peripheral Control functions + * @brief Low Power modes configuration functions + * +@verbatim + + =============================================================================== + ##### Peripheral Control functions ##### + =============================================================================== + + [..] + *** PVD configuration *** + ========================= + [..] + (+) The PVD is used to monitor the VDD power supply by comparing it to a + threshold selected by the PVD Level (PLS[2:0] bits in PWR_CR2 register). + + (+) PVDO flag is available to indicate if VDD/VDDA is higher or lower + than the PVD threshold. This event is internally connected to the EXTI + line16 and can generate an interrupt if enabled. This is done through + __HAL_PVD_EXTI_ENABLE_IT() macro. + (+) The PVD is stopped in Standby mode. + + + *** WakeUp pin configuration *** + ================================ + [..] + (+) WakeUp pins are used to wakeup the system from Standby mode or Shutdown mode. + The polarity of these pins can be set to configure event detection on high + level (rising edge) or low level (falling edge). + + + + *** Low Power modes configuration *** + ===================================== + [..] + The devices feature 8 low-power modes: + (+) Low-power Run mode: core and peripherals are running, main regulator off, low power regulator on. + (+) Sleep mode: Cortex-M4 core stopped, peripherals kept running, main and low power regulators on. + (+) Low-power Sleep mode: Cortex-M4 core stopped, peripherals kept running, main regulator off, low power regulator on. + (+) Stop 0 mode: all clocks are stopped except LSI and LSE, main and low power regulators on. + (+) Stop 1 mode: all clocks are stopped except LSI and LSE, main regulator off, low power regulator on. + (+) Stop 2 mode: all clocks are stopped except LSI and LSE, main regulator off, low power regulator on, reduced set of waking up IPs compared to Stop 1 mode. + (+) Standby mode with SRAM2: all clocks are stopped except LSI and LSE, SRAM2 content preserved, main regulator off, low power regulator on. + (+) Standby mode without SRAM2: all clocks are stopped except LSI and LSE, main and low power regulators off. + (+) Shutdown mode: all clocks are stopped except LSE, main and low power regulators off. + + + *** Low-power run mode *** + ========================== + [..] + (+) Entry: (from main run mode) + (++) set LPR bit with HAL_PWREx_EnableLowPowerRunMode() API after having decreased the system clock below 2 MHz. + + (+) Exit: + (++) clear LPR bit then wait for REGLP bit to be reset with HAL_PWREx_DisableLowPowerRunMode() API. Only + then can the system clock frequency be increased above 2 MHz. + + + *** Sleep mode / Low-power sleep mode *** + ========================================= + [..] + (+) Entry: + The Sleep mode / Low-power Sleep mode is entered through HAL_PWR_EnterSLEEPMode() API + in specifying whether or not the regulator is forced to low-power mode and if exit is interrupt or event-triggered. + (++) PWR_MAINREGULATOR_ON: Sleep mode (regulator in main mode). + (++) PWR_LOWPOWERREGULATOR_ON: Low-power sleep (regulator in low power mode). + In the latter case, the system clock frequency must have been decreased below 2 MHz beforehand. + (++) PWR_SLEEPENTRY_WFI: enter SLEEP mode with WFI instruction + (++) PWR_SLEEPENTRY_WFE: enter SLEEP mode with WFE instruction + + (+) WFI Exit: + (++) Any peripheral interrupt acknowledged by the nested vectored interrupt + controller (NVIC) or any wake-up event. + + (+) WFE Exit: + (++) Any wake-up event such as an EXTI line configured in event mode. + + [..] When exiting the Low-power sleep mode by issuing an interrupt or a wakeup event, + the MCU is in Low-power Run mode. + + *** Stop 0, Stop 1 and Stop 2 modes *** + =============================== + [..] + (+) Entry: + The Stop 0, Stop 1 or Stop 2 modes are entered through the following API's: + (++) HAL_PWREx_EnterSTOP0Mode() for mode 0 or HAL_PWREx_EnterSTOP1Mode() for mode 1 or for porting reasons HAL_PWR_EnterSTOPMode(). + (++) HAL_PWREx_EnterSTOP2Mode() for mode 2. + (+) Regulator setting (applicable to HAL_PWR_EnterSTOPMode() only): + (++) PWR_MAINREGULATOR_ON + (++) PWR_LOWPOWERREGULATOR_ON + (+) Exit (interrupt or event-triggered, specified when entering STOP mode): + (++) PWR_STOPENTRY_WFI: enter Stop mode with WFI instruction + (++) PWR_STOPENTRY_WFE: enter Stop mode with WFE instruction + + (+) WFI Exit: + (++) Any EXTI Line (Internal or External) configured in Interrupt mode. + (++) Some specific communication peripherals (USART, LPUART, I2C) interrupts + when programmed in wakeup mode. + (+) WFE Exit: + (++) Any EXTI Line (Internal or External) configured in Event mode. + + [..] + When exiting Stop 0 and Stop 1 modes, the MCU is either in Run mode or in Low-power Run mode + depending on the LPR bit setting. + When exiting Stop 2 mode, the MCU is in Run mode. + + *** Standby mode *** + ==================== + [..] + The Standby mode offers two options: + (+) option a) all clocks off except LSI and LSE, RRS bit set (keeps voltage regulator in low power mode). + SRAM and registers contents are lost except for the SRAM2 content, the RTC registers, RTC backup registers + and Standby circuitry. + (+) option b) all clocks off except LSI and LSE, RRS bit cleared (voltage regulator then disabled). + SRAM and register contents are lost except for the RTC registers, RTC backup registers + and Standby circuitry. + + (++) Entry: + (+++) The Standby mode is entered through HAL_PWR_EnterSTANDBYMode() API. + SRAM1 and register contents are lost except for registers in the Backup domain and + Standby circuitry. SRAM2 content can be preserved if the bit RRS is set in PWR_CR3 register. + To enable this feature, the user can resort to HAL_PWREx_EnableSRAM2ContentRetention() API + to set RRS bit. + + (++) Exit: + (+++) WKUP pin rising edge, RTC alarm or wakeup, tamper event, time-stamp event, + external reset in NRST pin, IWDG reset. + + [..] After waking up from Standby mode, program execution restarts in the same way as after a Reset. + + + *** Shutdown mode *** + ====================== + [..] + In Shutdown mode, + voltage regulator is disabled, all clocks are off except LSE, RRS bit is cleared. + SRAM and registers contents are lost except for backup domain registers. + + (+) Entry: + The Shutdown mode is entered through HAL_PWREx_EnterSHUTDOWNMode() API. + + (+) Exit: + (++) WKUP pin rising edge, RTC alarm or wakeup, tamper event, time-stamp event, + external reset in NRST pin. + + [..] After waking up from Shutdown mode, program execution restarts in the same way as after a Reset. + + + *** Auto-wakeup (AWU) from low-power mode *** + ============================================= + [..] + The MCU can be woken up from low-power mode by an RTC Alarm event, an RTC + Wakeup event, a tamper event or a time-stamp event, without depending on + an external interrupt (Auto-wakeup mode). + + (+) RTC auto-wakeup (AWU) from the Stop, Standby and Shutdown modes + + + (++) To wake up from the Stop mode with an RTC alarm event, it is necessary to + configure the RTC to generate the RTC alarm using the HAL_RTC_SetAlarm_IT() function. + + (++) To wake up from the Stop mode with an RTC Tamper or time stamp event, it + is necessary to configure the RTC to detect the tamper or time stamp event using the + HAL_RTCEx_SetTimeStamp_IT() or HAL_RTCEx_SetTamper_IT() functions. + + (++) To wake up from the Stop mode with an RTC WakeUp event, it is necessary to + configure the RTC to generate the RTC WakeUp event using the HAL_RTCEx_SetWakeUpTimer_IT() function. + +@endverbatim + * @{ + */ + + + +/** + * @brief Configure the voltage threshold detected by the Power Voltage Detector (PVD). + * @param sConfigPVD: pointer to a PWR_PVDTypeDef structure that contains the PVD + * configuration information. + * @note Refer to the electrical characteristics of your device datasheet for + * more details about the voltage thresholds corresponding to each + * detection level. + * @retval None + */ +HAL_StatusTypeDef HAL_PWR_ConfigPVD(PWR_PVDTypeDef *sConfigPVD) +{ + /* Check the parameters */ + assert_param(IS_PWR_PVD_LEVEL(sConfigPVD->PVDLevel)); + assert_param(IS_PWR_PVD_MODE(sConfigPVD->Mode)); + + /* Set PLS bits according to PVDLevel value */ + MODIFY_REG(PWR->CR2, PWR_CR2_PLS, sConfigPVD->PVDLevel); + + /* Clear any previous config. Keep it clear if no event or IT mode is selected */ + __HAL_PWR_PVD_EXTI_DISABLE_EVENT(); + __HAL_PWR_PVD_EXTI_DISABLE_IT(); + __HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE(); + __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE(); + + /* Configure interrupt mode */ + if((sConfigPVD->Mode & PVD_MODE_IT) == PVD_MODE_IT) + { + __HAL_PWR_PVD_EXTI_ENABLE_IT(); + } + + /* Configure event mode */ + if((sConfigPVD->Mode & PVD_MODE_EVT) == PVD_MODE_EVT) + { + __HAL_PWR_PVD_EXTI_ENABLE_EVENT(); + } + + /* Configure the edge */ + if((sConfigPVD->Mode & PVD_RISING_EDGE) == PVD_RISING_EDGE) + { + __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE(); + } + + if((sConfigPVD->Mode & PVD_FALLING_EDGE) == PVD_FALLING_EDGE) + { + __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE(); + } + + return HAL_OK; +} + + +/** + * @brief Enable the Power Voltage Detector (PVD). + * @retval None + */ +void HAL_PWR_EnablePVD(void) +{ + SET_BIT(PWR->CR2, PWR_CR2_PVDE); +} + +/** + * @brief Disable the Power Voltage Detector (PVD). + * @retval None + */ +void HAL_PWR_DisablePVD(void) +{ + CLEAR_BIT(PWR->CR2, PWR_CR2_PVDE); +} + + + + +/** + * @brief Enable the WakeUp PINx functionality. + * @param WakeUpPinPolarity: Specifies which Wake-Up pin to enable. + * This parameter can be one of the following legacy values which set the default polarity + * i.e. detection on high level (rising edge): + * @arg @ref PWR_WAKEUP_PIN1, PWR_WAKEUP_PIN2, PWR_WAKEUP_PIN3, PWR_WAKEUP_PIN4, PWR_WAKEUP_PIN5 + * + * or one of the following value where the user can explicitly specify the enabled pin and + * the chosen polarity: + * @arg @ref PWR_WAKEUP_PIN1_HIGH or PWR_WAKEUP_PIN1_LOW + * @arg @ref PWR_WAKEUP_PIN2_HIGH or PWR_WAKEUP_PIN2_LOW + * @arg @ref PWR_WAKEUP_PIN3_HIGH or PWR_WAKEUP_PIN3_LOW + * @arg @ref PWR_WAKEUP_PIN4_HIGH or PWR_WAKEUP_PIN4_LOW + * @arg @ref PWR_WAKEUP_PIN5_HIGH or PWR_WAKEUP_PIN5_LOW + * @note PWR_WAKEUP_PINx and PWR_WAKEUP_PINx_HIGH are equivalent. + * @retval None + */ +void HAL_PWR_EnableWakeUpPin(uint32_t WakeUpPinPolarity) +{ + assert_param(IS_PWR_WAKEUP_PIN(WakeUpPinPolarity)); + + /* Specifies the Wake-Up pin polarity for the event detection + (rising or falling edge) */ + MODIFY_REG(PWR->CR4, (PWR_CR3_EWUP & WakeUpPinPolarity), (WakeUpPinPolarity >> PWR_WUP_POLARITY_SHIFT)); + + /* Enable wake-up pin */ + SET_BIT(PWR->CR3, (PWR_CR3_EWUP & WakeUpPinPolarity)); + + +} + +/** + * @brief Disable the WakeUp PINx functionality. + * @param WakeUpPinx: Specifies the Power Wake-Up pin to disable. + * This parameter can be one of the following values: + * @arg @ref PWR_WAKEUP_PIN1, PWR_WAKEUP_PIN2, PWR_WAKEUP_PIN3, PWR_WAKEUP_PIN4, PWR_WAKEUP_PIN5 + * @retval None + */ +void HAL_PWR_DisableWakeUpPin(uint32_t WakeUpPinx) +{ + assert_param(IS_PWR_WAKEUP_PIN(WakeUpPinx)); + + CLEAR_BIT(PWR->CR3, (PWR_CR3_EWUP & WakeUpPinx)); +} + + +/** + * @brief Enter Sleep or Low-power Sleep mode. + * @note In Sleep/Low-power Sleep mode, all I/O pins keep the same state as in Run mode. + * @param Regulator: Specifies the regulator state in Sleep/Low-power Sleep mode. + * This parameter can be one of the following values: + * @arg @ref PWR_MAINREGULATOR_ON Sleep mode (regulator in main mode) + * @arg @ref PWR_LOWPOWERREGULATOR_ON Low-power Sleep mode (regulator in low-power mode) + * @note Low-power Sleep mode is entered from Low-power Run mode. Therefore, if not yet + * in Low-power Run mode before calling HAL_PWR_EnterSLEEPMode() with Regulator set + * to PWR_LOWPOWERREGULATOR_ON, the user can optionally configure the + * Flash in power-down monde in setting the SLEEP_PD bit in FLASH_ACR register. + * Additionally, the clock frequency must be reduced below 2 MHz. + * Setting SLEEP_PD in FLASH_ACR then appropriately reducing the clock frequency must + * be done before calling HAL_PWR_EnterSLEEPMode() API. + * @note When exiting Low-power Sleep mode, the MCU is in Low-power Run mode. To move in + * Run mode, the user must resort to HAL_PWREx_DisableLowPowerRunMode() API. + * @param SLEEPEntry: Specifies if Sleep mode is entered with WFI or WFE instruction. + * This parameter can be one of the following values: + * @arg @ref PWR_SLEEPENTRY_WFI enter Sleep or Low-power Sleep mode with WFI instruction + * @arg @ref PWR_SLEEPENTRY_WFE enter Sleep or Low-power Sleep mode with WFE instruction + * @note When WFI entry is used, tick interrupt have to be disabled if not desired as + * the interrupt wake up source. + * @retval None + */ +void HAL_PWR_EnterSLEEPMode(uint32_t Regulator, uint8_t SLEEPEntry) +{ + /* Check the parameters */ + assert_param(IS_PWR_REGULATOR(Regulator)); + assert_param(IS_PWR_SLEEP_ENTRY(SLEEPEntry)); + + /* Set Regulator parameter */ + if (Regulator == PWR_MAINREGULATOR_ON) + { + /* If in low-power run mode at this point, exit it */ + if (HAL_IS_BIT_SET(PWR->SR2, PWR_SR2_REGLPF)) + { + if (HAL_PWREx_DisableLowPowerRunMode() != HAL_OK) + { + return ; + } + } + /* Regulator now in main mode. */ + } + else + { + /* If in run mode, first move to low-power run mode. + The system clock frequency must be below 2 MHz at this point. */ + if (HAL_IS_BIT_SET(PWR->SR2, PWR_SR2_REGLPF) == RESET) + { + HAL_PWREx_EnableLowPowerRunMode(); + } + } + + /* Clear SLEEPDEEP bit of Cortex System Control Register */ + CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk)); + + /* Select SLEEP mode entry -------------------------------------------------*/ + if(SLEEPEntry == PWR_SLEEPENTRY_WFI) + { + /* Request Wait For Interrupt */ + __WFI(); + } + else + { + /* Request Wait For Event */ + __SEV(); + __WFE(); + __WFE(); + } + +} + + +/** + * @brief Enter Stop mode + * @note This API is named HAL_PWR_EnterSTOPMode to ensure compatibility with legacy code running + * on devices where only "Stop mode" is mentioned with main or low power regulator ON. + * @note In Stop mode, all I/O pins keep the same state as in Run mode. + * @note All clocks in the VCORE domain are stopped; the PLL, the MSI, + * the HSI and the HSE oscillators are disabled. Some peripherals with the wakeup capability + * (I2Cx, USARTx and LPUART) can switch on the HSI to receive a frame, and switch off the HSI + * after receiving the frame if it is not a wakeup frame. In this case, the HSI clock is propagated + * only to the peripheral requesting it. + * SRAM1, SRAM2 and register contents are preserved. + * The BOR is available. + * The voltage regulator can be configured either in normal (Stop 0) or low-power mode (Stop 1). + * @note When exiting Stop 0 or Stop 1 mode by issuing an interrupt or a wakeup event, + * the HSI RC oscillator is selected as system clock if STOPWUCK bit in RCC_CFGR register + * is set; the MSI oscillator is selected if STOPWUCK is cleared. + * @note When the voltage regulator operates in low power mode (Stop 1), an additional + * startup delay is incurred when waking up. + * By keeping the internal regulator ON during Stop mode (Stop 0), the consumption + * is higher although the startup time is reduced. + * @param Regulator: Specifies the regulator state in Stop mode. + * This parameter can be one of the following values: + * @arg @ref PWR_MAINREGULATOR_ON Stop 0 mode (main regulator ON) + * @arg @ref PWR_LOWPOWERREGULATOR_ON Stop 1 mode (low power regulator ON) + * @param STOPEntry: Specifies Stop 0 or Stop 1 mode is entered with WFI or WFE instruction. + * This parameter can be one of the following values: + * @arg @ref PWR_STOPENTRY_WFI Enter Stop 0 or Stop 1 mode with WFI instruction. + * @arg @ref PWR_STOPENTRY_WFE Enter Stop 0 or Stop 1 mode with WFE instruction. + * @retval None + */ +void HAL_PWR_EnterSTOPMode(uint32_t Regulator, uint8_t STOPEntry) +{ + /* Check the parameters */ + assert_param(IS_PWR_REGULATOR(Regulator)); + + if(Regulator == PWR_LOWPOWERREGULATOR_ON) + { + HAL_PWREx_EnterSTOP1Mode(STOPEntry); + } + else + { + HAL_PWREx_EnterSTOP0Mode(STOPEntry); + } +} + +/** + * @brief Enter Standby mode. + * @note In Standby mode, the PLL, the HSI, the MSI and the HSE oscillators are switched + * off. The voltage regulator is disabled, except when SRAM2 content is preserved + * in which case the regulator is in low-power mode. + * SRAM1 and register contents are lost except for registers in the Backup domain and + * Standby circuitry. SRAM2 content can be preserved if the bit RRS is set in PWR_CR3 register. + * To enable this feature, the user can resort to HAL_PWREx_EnableSRAM2ContentRetention() API + * to set RRS bit. + * The BOR is available. + * @note The I/Os can be configured either with a pull-up or pull-down or can be kept in analog state. + * HAL_PWREx_EnableGPIOPullUp() and HAL_PWREx_EnableGPIOPullDown() respectively enable Pull Up and + * Pull Down state, HAL_PWREx_DisableGPIOPullUp() and HAL_PWREx_DisableGPIOPullDown() disable the + * same. + * These states are effective in Standby mode only if APC bit is set through + * HAL_PWREx_EnablePullUpPullDownConfig() API. + * @retval None + */ +void HAL_PWR_EnterSTANDBYMode(void) +{ + /* Set Stand-by mode */ + MODIFY_REG(PWR->CR1, PWR_CR1_LPMS, PWR_CR1_LPMS_STANDBY); + + /* Set SLEEPDEEP bit of Cortex System Control Register */ + SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk)); + +/* This option is used to ensure that store operations are completed */ +#if defined ( __CC_ARM) + __force_stores(); +#endif + /* Request Wait For Interrupt */ + __WFI(); +} + + + +/** + * @brief Indicate Sleep-On-Exit when returning from Handler mode to Thread mode. + * @note Set SLEEPONEXIT bit of SCR register. When this bit is set, the processor + * re-enters SLEEP mode when an interruption handling is over. + * Setting this bit is useful when the processor is expected to run only on + * interruptions handling. + * @retval None + */ +void HAL_PWR_EnableSleepOnExit(void) +{ + /* Set SLEEPONEXIT bit of Cortex System Control Register */ + SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPONEXIT_Msk)); +} + + +/** + * @brief Disable Sleep-On-Exit feature when returning from Handler mode to Thread mode. + * @note Clear SLEEPONEXIT bit of SCR register. When this bit is set, the processor + * re-enters SLEEP mode when an interruption handling is over. + * @retval None + */ +void HAL_PWR_DisableSleepOnExit(void) +{ + /* Clear SLEEPONEXIT bit of Cortex System Control Register */ + CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPONEXIT_Msk)); +} + + + +/** + * @brief Enable CORTEX M4 SEVONPEND bit. + * @note Set SEVONPEND bit of SCR register. When this bit is set, this causes + * WFE to wake up when an interrupt moves from inactive to pended. + * @retval None + */ +void HAL_PWR_EnableSEVOnPend(void) +{ + /* Set SEVONPEND bit of Cortex System Control Register */ + SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SEVONPEND_Msk)); +} + + +/** + * @brief Disable CORTEX M4 SEVONPEND bit. + * @note Clear SEVONPEND bit of SCR register. When this bit is set, this causes + * WFE to wake up when an interrupt moves from inactive to pended. + * @retval None + */ +void HAL_PWR_DisableSEVOnPend(void) +{ + /* Clear SEVONPEND bit of Cortex System Control Register */ + CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SEVONPEND_Msk)); +} + + + + + +/** + * @brief PWR PVD interrupt callback + * @retval None + */ +__weak void HAL_PWR_PVDCallback(void) +{ + /* NOTE : This function should not be modified; when the callback is needed, + the HAL_PWR_PVDCallback can be implemented in the user file + */ +} + +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_PWR_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ diff --git a/CablePositioning_IAP_V1.0/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.c b/CablePositioning_IAP_V1.0/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.c index 1bf4536..0b6eb2f 100644 --- a/CablePositioning_IAP_V1.0/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.c +++ b/CablePositioning_IAP_V1.0/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.c @@ -1,1474 +1,1474 @@ -/** - ****************************************************************************** - * @file stm32l4xx_hal_pwr_ex.c - * @author MCD Application Team - * @brief Extended PWR HAL module driver. - * This file provides firmware functions to manage the following - * functionalities of the Power Controller (PWR) peripheral: - * + Extended Initialization and de-initialization functions - * + Extended Peripheral Control functions - * - ****************************************************************************** - * @attention - * - * Copyright (c) 2017 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32l4xx_hal.h" - -/** @addtogroup STM32L4xx_HAL_Driver - * @{ - */ - -/** @defgroup PWREx PWREx - * @brief PWR Extended HAL module driver - * @{ - */ - -#ifdef HAL_PWR_MODULE_ENABLED - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ - -#if defined (STM32L412xx) || defined (STM32L422xx) || defined (STM32L431xx) || defined (STM32L432xx) || defined (STM32L433xx) || defined (STM32L442xx) || defined (STM32L443xx) -#define PWR_PORTH_AVAILABLE_PINS ((uint32_t)0x0000000B) /* PH0/PH1/PH3 */ -#elif defined (STM32L451xx) || defined (STM32L452xx) || defined (STM32L462xx) -#define PWR_PORTH_AVAILABLE_PINS ((uint32_t)0x0000000B) /* PH0/PH1/PH3 */ -#elif defined (STM32L471xx) || defined (STM32L475xx) || defined (STM32L476xx) || defined (STM32L485xx) || defined (STM32L486xx) -#define PWR_PORTH_AVAILABLE_PINS ((uint32_t)0x00000003) /* PH0/PH1 */ -#elif defined (STM32L496xx) || defined (STM32L4A6xx) || defined (STM32L4P5xx) || defined (STM32L4Q5xx) || defined (STM32L4R5xx) || defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined (STM32L4S9xx) -#define PWR_PORTH_AVAILABLE_PINS ((uint32_t)0x0000FFFF) /* PH0..PH15 */ -#endif - -#if defined (STM32L496xx) || defined (STM32L4A6xx) || defined (STM32L4P5xx) || defined (STM32L4Q5xx) || defined (STM32L4R5xx) || defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined (STM32L4S9xx) -#define PWR_PORTI_AVAILABLE_PINS ((uint32_t)0x00000FFF) /* PI0..PI11 */ -#endif - -/** @defgroup PWR_Extended_Private_Defines PWR Extended Private Defines - * @{ - */ - -/** @defgroup PWREx_PVM_Mode_Mask PWR PVM Mode Mask - * @{ - */ -#define PVM_MODE_IT ((uint32_t)0x00010000) /*!< Mask for interruption yielded by PVM threshold crossing */ -#define PVM_MODE_EVT ((uint32_t)0x00020000) /*!< Mask for event yielded by PVM threshold crossing */ -#define PVM_RISING_EDGE ((uint32_t)0x00000001) /*!< Mask for rising edge set as PVM trigger */ -#define PVM_FALLING_EDGE ((uint32_t)0x00000002) /*!< Mask for falling edge set as PVM trigger */ -/** - * @} - */ - -/** @defgroup PWREx_TimeOut_Value PWR Extended Flag Setting Time Out Value - * @{ - */ -#define PWR_FLAG_SETTING_DELAY_US 50UL /*!< Time out value for REGLPF and VOSF flags setting */ -/** - * @} - */ - - - -/** - * @} - */ - - - -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ -/* Exported functions --------------------------------------------------------*/ - -/** @defgroup PWREx_Exported_Functions PWR Extended Exported Functions - * @{ - */ - -/** @defgroup PWREx_Exported_Functions_Group1 Extended Peripheral Control functions - * @brief Extended Peripheral Control functions - * -@verbatim - =============================================================================== - ##### Extended Peripheral Initialization and de-initialization functions ##### - =============================================================================== - [..] - -@endverbatim - * @{ - */ - - -/** - * @brief Return Voltage Scaling Range. - * @retval VOS bit field (PWR_REGULATOR_VOLTAGE_SCALE1 or PWR_REGULATOR_VOLTAGE_SCALE2 - * or PWR_REGULATOR_VOLTAGE_SCALE1_BOOST when applicable) - */ -uint32_t HAL_PWREx_GetVoltageRange(void) -{ -#if defined(PWR_CR5_R1MODE) - if (READ_BIT(PWR->CR1, PWR_CR1_VOS) == PWR_REGULATOR_VOLTAGE_SCALE2) - { - return PWR_REGULATOR_VOLTAGE_SCALE2; - } - else if (READ_BIT(PWR->CR5, PWR_CR5_R1MODE) == PWR_CR5_R1MODE) - { - /* PWR_CR5_R1MODE bit set means that Range 1 Boost is disabled */ - return PWR_REGULATOR_VOLTAGE_SCALE1; - } - else - { - return PWR_REGULATOR_VOLTAGE_SCALE1_BOOST; - } -#else - return (PWR->CR1 & PWR_CR1_VOS); -#endif -} - - - -/** - * @brief Configure the main internal regulator output voltage. - * @param VoltageScaling specifies the regulator output voltage to achieve - * a tradeoff between performance and power consumption. - * This parameter can be one of the following values: - @if STM32L4S9xx - * @arg @ref PWR_REGULATOR_VOLTAGE_SCALE1_BOOST when available, Regulator voltage output range 1 boost mode, - * typical output voltage at 1.2 V, - * system frequency up to 120 MHz. - @endif - * @arg @ref PWR_REGULATOR_VOLTAGE_SCALE1 Regulator voltage output range 1 mode, - * typical output voltage at 1.2 V, - * system frequency up to 80 MHz. - * @arg @ref PWR_REGULATOR_VOLTAGE_SCALE2 Regulator voltage output range 2 mode, - * typical output voltage at 1.0 V, - * system frequency up to 26 MHz. - * @note When moving from Range 1 to Range 2, the system frequency must be decreased to - * a value below 26 MHz before calling HAL_PWREx_ControlVoltageScaling() API. - * When moving from Range 2 to Range 1, the system frequency can be increased to - * a value up to 80 MHz after calling HAL_PWREx_ControlVoltageScaling() API. For - * some devices, the system frequency can be increased up to 120 MHz. - * @note When moving from Range 2 to Range 1, the API waits for VOSF flag to be - * cleared before returning the status. If the flag is not cleared within - * 50 microseconds, HAL_TIMEOUT status is reported. - * @retval HAL Status - */ -HAL_StatusTypeDef HAL_PWREx_ControlVoltageScaling(uint32_t VoltageScaling) -{ - uint32_t wait_loop_index; - - assert_param(IS_PWR_VOLTAGE_SCALING_RANGE(VoltageScaling)); - -#if defined(PWR_CR5_R1MODE) - if (VoltageScaling == PWR_REGULATOR_VOLTAGE_SCALE1_BOOST) - { - /* If current range is range 2 */ - if (READ_BIT(PWR->CR1, PWR_CR1_VOS) == PWR_REGULATOR_VOLTAGE_SCALE2) - { - /* Make sure Range 1 Boost is enabled */ - CLEAR_BIT(PWR->CR5, PWR_CR5_R1MODE); - - /* Set Range 1 */ - MODIFY_REG(PWR->CR1, PWR_CR1_VOS, PWR_REGULATOR_VOLTAGE_SCALE1); - - /* Wait until VOSF is cleared */ - wait_loop_index = ((PWR_FLAG_SETTING_DELAY_US * SystemCoreClock) / 1000000U) + 1; - while ((HAL_IS_BIT_SET(PWR->SR2, PWR_SR2_VOSF)) && (wait_loop_index != 0U)) - { - wait_loop_index--; - } - if (HAL_IS_BIT_SET(PWR->SR2, PWR_SR2_VOSF)) - { - return HAL_TIMEOUT; - } - } - /* If current range is range 1 normal or boost mode */ - else - { - /* Enable Range 1 Boost (no issue if bit already reset) */ - CLEAR_BIT(PWR->CR5, PWR_CR5_R1MODE); - } - } - else if (VoltageScaling == PWR_REGULATOR_VOLTAGE_SCALE1) - { - /* If current range is range 2 */ - if (READ_BIT(PWR->CR1, PWR_CR1_VOS) == PWR_REGULATOR_VOLTAGE_SCALE2) - { - /* Make sure Range 1 Boost is disabled */ - SET_BIT(PWR->CR5, PWR_CR5_R1MODE); - - /* Set Range 1 */ - MODIFY_REG(PWR->CR1, PWR_CR1_VOS, PWR_REGULATOR_VOLTAGE_SCALE1); - - /* Wait until VOSF is cleared */ - wait_loop_index = ((PWR_FLAG_SETTING_DELAY_US * SystemCoreClock) / 1000000U) + 1; - while ((HAL_IS_BIT_SET(PWR->SR2, PWR_SR2_VOSF)) && (wait_loop_index != 0U)) - { - wait_loop_index--; - } - if (HAL_IS_BIT_SET(PWR->SR2, PWR_SR2_VOSF)) - { - return HAL_TIMEOUT; - } - } - /* If current range is range 1 normal or boost mode */ - else - { - /* Disable Range 1 Boost (no issue if bit already set) */ - SET_BIT(PWR->CR5, PWR_CR5_R1MODE); - } - } - else - { - /* Set Range 2 */ - MODIFY_REG(PWR->CR1, PWR_CR1_VOS, PWR_REGULATOR_VOLTAGE_SCALE2); - /* No need to wait for VOSF to be cleared for this transition */ - /* PWR_CR5_R1MODE bit setting has no effect in Range 2 */ - } - -#else - - /* If Set Range 1 */ - if (VoltageScaling == PWR_REGULATOR_VOLTAGE_SCALE1) - { - if (READ_BIT(PWR->CR1, PWR_CR1_VOS) != PWR_REGULATOR_VOLTAGE_SCALE1) - { - /* Set Range 1 */ - MODIFY_REG(PWR->CR1, PWR_CR1_VOS, PWR_REGULATOR_VOLTAGE_SCALE1); - - /* Wait until VOSF is cleared */ - wait_loop_index = ((PWR_FLAG_SETTING_DELAY_US * SystemCoreClock) / 1000000U) + 1U; - while ((HAL_IS_BIT_SET(PWR->SR2, PWR_SR2_VOSF)) && (wait_loop_index != 0U)) - { - wait_loop_index--; - } - if (HAL_IS_BIT_SET(PWR->SR2, PWR_SR2_VOSF)) - { - return HAL_TIMEOUT; - } - } - } - else - { - if (READ_BIT(PWR->CR1, PWR_CR1_VOS) != PWR_REGULATOR_VOLTAGE_SCALE2) - { - /* Set Range 2 */ - MODIFY_REG(PWR->CR1, PWR_CR1_VOS, PWR_REGULATOR_VOLTAGE_SCALE2); - /* No need to wait for VOSF to be cleared for this transition */ - } - } -#endif - - return HAL_OK; -} - - -/** - * @brief Enable battery charging. - * When VDD is present, charge the external battery on VBAT thru an internal resistor. - * @param ResistorSelection specifies the resistor impedance. - * This parameter can be one of the following values: - * @arg @ref PWR_BATTERY_CHARGING_RESISTOR_5 5 kOhms resistor - * @arg @ref PWR_BATTERY_CHARGING_RESISTOR_1_5 1.5 kOhms resistor - * @retval None - */ -void HAL_PWREx_EnableBatteryCharging(uint32_t ResistorSelection) -{ - assert_param(IS_PWR_BATTERY_RESISTOR_SELECT(ResistorSelection)); - - /* Specify resistor selection */ - MODIFY_REG(PWR->CR4, PWR_CR4_VBRS, ResistorSelection); - - /* Enable battery charging */ - SET_BIT(PWR->CR4, PWR_CR4_VBE); -} - - -/** - * @brief Disable battery charging. - * @retval None - */ -void HAL_PWREx_DisableBatteryCharging(void) -{ - CLEAR_BIT(PWR->CR4, PWR_CR4_VBE); -} - - -#if defined(PWR_CR2_USV) -/** - * @brief Enable VDDUSB supply. - * @note Remove VDDUSB electrical and logical isolation, once VDDUSB supply is present. - * @retval None - */ -void HAL_PWREx_EnableVddUSB(void) -{ - SET_BIT(PWR->CR2, PWR_CR2_USV); -} - - -/** - * @brief Disable VDDUSB supply. - * @retval None - */ -void HAL_PWREx_DisableVddUSB(void) -{ - CLEAR_BIT(PWR->CR2, PWR_CR2_USV); -} -#endif /* PWR_CR2_USV */ - -#if defined(PWR_CR2_IOSV) -/** - * @brief Enable VDDIO2 supply. - * @note Remove VDDIO2 electrical and logical isolation, once VDDIO2 supply is present. - * @retval None - */ -void HAL_PWREx_EnableVddIO2(void) -{ - SET_BIT(PWR->CR2, PWR_CR2_IOSV); -} - - -/** - * @brief Disable VDDIO2 supply. - * @retval None - */ -void HAL_PWREx_DisableVddIO2(void) -{ - CLEAR_BIT(PWR->CR2, PWR_CR2_IOSV); -} -#endif /* PWR_CR2_IOSV */ - - -/** - * @brief Enable Internal Wake-up Line. - * @retval None - */ -void HAL_PWREx_EnableInternalWakeUpLine(void) -{ - SET_BIT(PWR->CR3, PWR_CR3_EIWF); -} - - -/** - * @brief Disable Internal Wake-up Line. - * @retval None - */ -void HAL_PWREx_DisableInternalWakeUpLine(void) -{ - CLEAR_BIT(PWR->CR3, PWR_CR3_EIWF); -} - - - -/** - * @brief Enable GPIO pull-up state in Standby and Shutdown modes. - * @note Set the relevant PUy bits of PWR_PUCRx register to configure the I/O in - * pull-up state in Standby and Shutdown modes. - * @note This state is effective in Standby and Shutdown modes only if APC bit - * is set through HAL_PWREx_EnablePullUpPullDownConfig() API. - * @note The configuration is lost when exiting the Shutdown mode due to the - * power-on reset, maintained when exiting the Standby mode. - * @note To avoid any conflict at Standby and Shutdown modes exits, the corresponding - * PDy bit of PWR_PDCRx register is cleared unless it is reserved. - * @note Even if a PUy bit to set is reserved, the other PUy bits entered as input - * parameter at the same time are set. - * @param GPIO Specify the IO port. This parameter can be PWR_GPIO_A, ..., PWR_GPIO_H - * (or PWR_GPIO_I depending on the devices) to select the GPIO peripheral. - * @param GPIONumber Specify the I/O pins numbers. - * This parameter can be one of the following values: - * PWR_GPIO_BIT_0, ..., PWR_GPIO_BIT_15 (except for the port where less - * I/O pins are available) or the logical OR of several of them to set - * several bits for a given port in a single API call. - * @retval HAL Status - */ -HAL_StatusTypeDef HAL_PWREx_EnableGPIOPullUp(uint32_t GPIO, uint32_t GPIONumber) -{ - HAL_StatusTypeDef status = HAL_OK; - - assert_param(IS_PWR_GPIO(GPIO)); - assert_param(IS_PWR_GPIO_BIT_NUMBER(GPIONumber)); - - switch (GPIO) - { - case PWR_GPIO_A: - SET_BIT(PWR->PUCRA, (GPIONumber & (~(PWR_GPIO_BIT_14)))); - CLEAR_BIT(PWR->PDCRA, (GPIONumber & (~(PWR_GPIO_BIT_13|PWR_GPIO_BIT_15)))); - break; - case PWR_GPIO_B: - SET_BIT(PWR->PUCRB, GPIONumber); - CLEAR_BIT(PWR->PDCRB, (GPIONumber & (~(PWR_GPIO_BIT_4)))); - break; - case PWR_GPIO_C: - SET_BIT(PWR->PUCRC, GPIONumber); - CLEAR_BIT(PWR->PDCRC, GPIONumber); - break; -#if defined(GPIOD) - case PWR_GPIO_D: - SET_BIT(PWR->PUCRD, GPIONumber); - CLEAR_BIT(PWR->PDCRD, GPIONumber); - break; -#endif -#if defined(GPIOE) - case PWR_GPIO_E: - SET_BIT(PWR->PUCRE, GPIONumber); - CLEAR_BIT(PWR->PDCRE, GPIONumber); - break; -#endif -#if defined(GPIOF) - case PWR_GPIO_F: - SET_BIT(PWR->PUCRF, GPIONumber); - CLEAR_BIT(PWR->PDCRF, GPIONumber); - break; -#endif -#if defined(GPIOG) - case PWR_GPIO_G: - SET_BIT(PWR->PUCRG, GPIONumber); - CLEAR_BIT(PWR->PDCRG, GPIONumber); - break; -#endif - case PWR_GPIO_H: - SET_BIT(PWR->PUCRH, (GPIONumber & PWR_PORTH_AVAILABLE_PINS)); -#if defined (STM32L496xx) || defined (STM32L4A6xx) - CLEAR_BIT(PWR->PDCRH, ((GPIONumber & PWR_PORTH_AVAILABLE_PINS) & (~(PWR_GPIO_BIT_3)))); -#else - CLEAR_BIT(PWR->PDCRH, (GPIONumber & PWR_PORTH_AVAILABLE_PINS)); -#endif - break; -#if defined(GPIOI) - case PWR_GPIO_I: - SET_BIT(PWR->PUCRI, (GPIONumber & PWR_PORTI_AVAILABLE_PINS)); - CLEAR_BIT(PWR->PDCRI, (GPIONumber & PWR_PORTI_AVAILABLE_PINS)); - break; -#endif - default: - status = HAL_ERROR; - break; - } - - return status; -} - - -/** - * @brief Disable GPIO pull-up state in Standby mode and Shutdown modes. - * @note Reset the relevant PUy bits of PWR_PUCRx register used to configure the I/O - * in pull-up state in Standby and Shutdown modes. - * @note Even if a PUy bit to reset is reserved, the other PUy bits entered as input - * parameter at the same time are reset. - * @param GPIO Specifies the IO port. This parameter can be PWR_GPIO_A, ..., PWR_GPIO_H - * (or PWR_GPIO_I depending on the devices) to select the GPIO peripheral. - * @param GPIONumber Specify the I/O pins numbers. - * This parameter can be one of the following values: - * PWR_GPIO_BIT_0, ..., PWR_GPIO_BIT_15 (except for the port where less - * I/O pins are available) or the logical OR of several of them to reset - * several bits for a given port in a single API call. - * @retval HAL Status - */ -HAL_StatusTypeDef HAL_PWREx_DisableGPIOPullUp(uint32_t GPIO, uint32_t GPIONumber) -{ - HAL_StatusTypeDef status = HAL_OK; - - assert_param(IS_PWR_GPIO(GPIO)); - assert_param(IS_PWR_GPIO_BIT_NUMBER(GPIONumber)); - - switch (GPIO) - { - case PWR_GPIO_A: - CLEAR_BIT(PWR->PUCRA, (GPIONumber & (~(PWR_GPIO_BIT_14)))); - break; - case PWR_GPIO_B: - CLEAR_BIT(PWR->PUCRB, GPIONumber); - break; - case PWR_GPIO_C: - CLEAR_BIT(PWR->PUCRC, GPIONumber); - break; -#if defined(GPIOD) - case PWR_GPIO_D: - CLEAR_BIT(PWR->PUCRD, GPIONumber); - break; -#endif -#if defined(GPIOE) - case PWR_GPIO_E: - CLEAR_BIT(PWR->PUCRE, GPIONumber); - break; -#endif -#if defined(GPIOF) - case PWR_GPIO_F: - CLEAR_BIT(PWR->PUCRF, GPIONumber); - break; -#endif -#if defined(GPIOG) - case PWR_GPIO_G: - CLEAR_BIT(PWR->PUCRG, GPIONumber); - break; -#endif - case PWR_GPIO_H: - CLEAR_BIT(PWR->PUCRH, (GPIONumber & PWR_PORTH_AVAILABLE_PINS)); - break; -#if defined(GPIOI) - case PWR_GPIO_I: - CLEAR_BIT(PWR->PUCRI, (GPIONumber & PWR_PORTI_AVAILABLE_PINS)); - break; -#endif - default: - status = HAL_ERROR; - break; - } - - return status; -} - - - -/** - * @brief Enable GPIO pull-down state in Standby and Shutdown modes. - * @note Set the relevant PDy bits of PWR_PDCRx register to configure the I/O in - * pull-down state in Standby and Shutdown modes. - * @note This state is effective in Standby and Shutdown modes only if APC bit - * is set through HAL_PWREx_EnablePullUpPullDownConfig() API. - * @note The configuration is lost when exiting the Shutdown mode due to the - * power-on reset, maintained when exiting the Standby mode. - * @note To avoid any conflict at Standby and Shutdown modes exits, the corresponding - * PUy bit of PWR_PUCRx register is cleared unless it is reserved. - * @note Even if a PDy bit to set is reserved, the other PDy bits entered as input - * parameter at the same time are set. - * @param GPIO Specify the IO port. This parameter can be PWR_GPIO_A..PWR_GPIO_H - * (or PWR_GPIO_I depending on the devices) to select the GPIO peripheral. - * @param GPIONumber Specify the I/O pins numbers. - * This parameter can be one of the following values: - * PWR_GPIO_BIT_0, ..., PWR_GPIO_BIT_15 (except for the port where less - * I/O pins are available) or the logical OR of several of them to set - * several bits for a given port in a single API call. - * @retval HAL Status - */ -HAL_StatusTypeDef HAL_PWREx_EnableGPIOPullDown(uint32_t GPIO, uint32_t GPIONumber) -{ - HAL_StatusTypeDef status = HAL_OK; - - assert_param(IS_PWR_GPIO(GPIO)); - assert_param(IS_PWR_GPIO_BIT_NUMBER(GPIONumber)); - - switch (GPIO) - { - case PWR_GPIO_A: - SET_BIT(PWR->PDCRA, (GPIONumber & (~(PWR_GPIO_BIT_13|PWR_GPIO_BIT_15)))); - CLEAR_BIT(PWR->PUCRA, (GPIONumber & (~(PWR_GPIO_BIT_14)))); - break; - case PWR_GPIO_B: - SET_BIT(PWR->PDCRB, (GPIONumber & (~(PWR_GPIO_BIT_4)))); - CLEAR_BIT(PWR->PUCRB, GPIONumber); - break; - case PWR_GPIO_C: - SET_BIT(PWR->PDCRC, GPIONumber); - CLEAR_BIT(PWR->PUCRC, GPIONumber); - break; -#if defined(GPIOD) - case PWR_GPIO_D: - SET_BIT(PWR->PDCRD, GPIONumber); - CLEAR_BIT(PWR->PUCRD, GPIONumber); - break; -#endif -#if defined(GPIOE) - case PWR_GPIO_E: - SET_BIT(PWR->PDCRE, GPIONumber); - CLEAR_BIT(PWR->PUCRE, GPIONumber); - break; -#endif -#if defined(GPIOF) - case PWR_GPIO_F: - SET_BIT(PWR->PDCRF, GPIONumber); - CLEAR_BIT(PWR->PUCRF, GPIONumber); - break; -#endif -#if defined(GPIOG) - case PWR_GPIO_G: - SET_BIT(PWR->PDCRG, GPIONumber); - CLEAR_BIT(PWR->PUCRG, GPIONumber); - break; -#endif - case PWR_GPIO_H: -#if defined (STM32L496xx) || defined (STM32L4A6xx) - SET_BIT(PWR->PDCRH, ((GPIONumber & PWR_PORTH_AVAILABLE_PINS) & (~(PWR_GPIO_BIT_3)))); -#else - SET_BIT(PWR->PDCRH, (GPIONumber & PWR_PORTH_AVAILABLE_PINS)); -#endif - CLEAR_BIT(PWR->PUCRH, (GPIONumber & PWR_PORTH_AVAILABLE_PINS)); - break; -#if defined(GPIOI) - case PWR_GPIO_I: - SET_BIT(PWR->PDCRI, (GPIONumber & PWR_PORTI_AVAILABLE_PINS)); - CLEAR_BIT(PWR->PUCRI, (GPIONumber & PWR_PORTI_AVAILABLE_PINS)); - break; -#endif - default: - status = HAL_ERROR; - break; - } - - return status; -} - - -/** - * @brief Disable GPIO pull-down state in Standby and Shutdown modes. - * @note Reset the relevant PDy bits of PWR_PDCRx register used to configure the I/O - * in pull-down state in Standby and Shutdown modes. - * @note Even if a PDy bit to reset is reserved, the other PDy bits entered as input - * parameter at the same time are reset. - * @param GPIO Specifies the IO port. This parameter can be PWR_GPIO_A..PWR_GPIO_H - * (or PWR_GPIO_I depending on the devices) to select the GPIO peripheral. - * @param GPIONumber Specify the I/O pins numbers. - * This parameter can be one of the following values: - * PWR_GPIO_BIT_0, ..., PWR_GPIO_BIT_15 (except for the port where less - * I/O pins are available) or the logical OR of several of them to reset - * several bits for a given port in a single API call. - * @retval HAL Status - */ -HAL_StatusTypeDef HAL_PWREx_DisableGPIOPullDown(uint32_t GPIO, uint32_t GPIONumber) -{ - HAL_StatusTypeDef status = HAL_OK; - - assert_param(IS_PWR_GPIO(GPIO)); - assert_param(IS_PWR_GPIO_BIT_NUMBER(GPIONumber)); - - switch (GPIO) - { - case PWR_GPIO_A: - CLEAR_BIT(PWR->PDCRA, (GPIONumber & (~(PWR_GPIO_BIT_13|PWR_GPIO_BIT_15)))); - break; - case PWR_GPIO_B: - CLEAR_BIT(PWR->PDCRB, (GPIONumber & (~(PWR_GPIO_BIT_4)))); - break; - case PWR_GPIO_C: - CLEAR_BIT(PWR->PDCRC, GPIONumber); - break; -#if defined(GPIOD) - case PWR_GPIO_D: - CLEAR_BIT(PWR->PDCRD, GPIONumber); - break; -#endif -#if defined(GPIOE) - case PWR_GPIO_E: - CLEAR_BIT(PWR->PDCRE, GPIONumber); - break; -#endif -#if defined(GPIOF) - case PWR_GPIO_F: - CLEAR_BIT(PWR->PDCRF, GPIONumber); - break; -#endif -#if defined(GPIOG) - case PWR_GPIO_G: - CLEAR_BIT(PWR->PDCRG, GPIONumber); - break; -#endif - case PWR_GPIO_H: -#if defined (STM32L496xx) || defined (STM32L4A6xx) - CLEAR_BIT(PWR->PDCRH, ((GPIONumber & PWR_PORTH_AVAILABLE_PINS) & (~(PWR_GPIO_BIT_3)))); -#else - CLEAR_BIT(PWR->PDCRH, (GPIONumber & PWR_PORTH_AVAILABLE_PINS)); -#endif - break; -#if defined(GPIOI) - case PWR_GPIO_I: - CLEAR_BIT(PWR->PDCRI, (GPIONumber & PWR_PORTI_AVAILABLE_PINS)); - break; -#endif - default: - status = HAL_ERROR; - break; - } - - return status; -} - - - -/** - * @brief Enable pull-up and pull-down configuration. - * @note When APC bit is set, the I/O pull-up and pull-down configurations defined in - * PWR_PUCRx and PWR_PDCRx registers are applied in Standby and Shutdown modes. - * @note Pull-up set by PUy bit of PWR_PUCRx register is not activated if the corresponding - * PDy bit of PWR_PDCRx register is also set (pull-down configuration priority is higher). - * HAL_PWREx_EnableGPIOPullUp() and HAL_PWREx_EnableGPIOPullDown() API's ensure there - * is no conflict when setting PUy or PDy bit. - * @retval None - */ -void HAL_PWREx_EnablePullUpPullDownConfig(void) -{ - SET_BIT(PWR->CR3, PWR_CR3_APC); -} - - -/** - * @brief Disable pull-up and pull-down configuration. - * @note When APC bit is cleared, the I/O pull-up and pull-down configurations defined in - * PWR_PUCRx and PWR_PDCRx registers are not applied in Standby and Shutdown modes. - * @retval None - */ -void HAL_PWREx_DisablePullUpPullDownConfig(void) -{ - CLEAR_BIT(PWR->CR3, PWR_CR3_APC); -} - - - -/** - * @brief Enable Full SRAM2 content retention in Standby mode. - * @retval None - */ -void HAL_PWREx_EnableSRAM2ContentRetention(void) -{ - (void) HAL_PWREx_SetSRAM2ContentRetention(PWR_FULL_SRAM2_RETENTION); -} - -/** - * @brief Disable SRAM2 content retention in Standby mode. - * @retval None - */ -void HAL_PWREx_DisableSRAM2ContentRetention(void) -{ - (void) HAL_PWREx_SetSRAM2ContentRetention(PWR_NO_SRAM2_RETENTION); -} - -/** - * @brief Enable SRAM2 content retention in Standby mode. - * @param SRAM2Size: specifies the SRAM2 size kept in Standby mode - * This parameter can be one of the following values: - * @arg @ref PWR_NO_SRAM2_RETENTION SRAM2 is powered off in Standby mode (SRAM2 content is lost) - * @arg @ref PWR_FULL_SRAM2_RETENTION Full SRAM2 is powered by the low-power regulator in Standby mode - * @arg @ref PWR_4KBYTES_SRAM2_RETENTION Only 4 Kbytes of SRAM2 is powered by the low-power regulator in Standby mode - * @note PWR_4KBYTES_SRAM2_RETENTION parameter is not available on all devices - * @retval HAL Status - */ -HAL_StatusTypeDef HAL_PWREx_SetSRAM2ContentRetention(uint32_t SRAM2Size) -{ - assert_param(IS_PWR_SRAM2_RETENTION(SRAM2Size)); - - if (SRAM2Size == PWR_NO_SRAM2_RETENTION) - { - CLEAR_BIT(PWR->CR3, PWR_CR3_RRS); - } - else if (SRAM2Size == PWR_FULL_SRAM2_RETENTION) - { - MODIFY_REG(PWR->CR3, PWR_CR3_RRS, PWR_FULL_SRAM2_RETENTION); - } -#if defined(PWR_CR3_RRS_1) - else if (SRAM2Size == PWR_4KBYTES_SRAM2_RETENTION) - { - MODIFY_REG(PWR->CR3, PWR_CR3_RRS, PWR_4KBYTES_SRAM2_RETENTION); - } -#endif /* PWR_CR3_RRS_1 */ - else { - return HAL_ERROR; - } - - return HAL_OK; -} - - -#if defined(PWR_CR3_ENULP) -/** - * @brief Enable Ultra Low Power BORL, BORH and PVD for STOP2 and Standby modes. - * @note All the other modes are not affected by this bit. - * @retval None - */ -void HAL_PWREx_EnableBORPVD_ULP(void) -{ - SET_BIT(PWR->CR3, PWR_CR3_ENULP); -} - - -/** - * @brief Disable Ultra Low Power BORL, BORH and PVD for STOP2 and Standby modes. - * @note All the other modes are not affected by this bit - * @retval None - */ -void HAL_PWREx_DisableBORPVD_ULP(void) -{ - CLEAR_BIT(PWR->CR3, PWR_CR3_ENULP); -} -#endif /* PWR_CR3_ENULP */ - - -#if defined(PWR_CR4_EXT_SMPS_ON) -/** - * @brief Enable the CFLDO working @ 0.95V. - * @note When external SMPS is used & CFLDO operating in Range 2, the regulated voltage of the - * internal CFLDO can be reduced to 0.95V. - * @retval None - */ -void HAL_PWREx_EnableExtSMPS_0V95(void) -{ - SET_BIT(PWR->CR4, PWR_CR4_EXT_SMPS_ON); -} - -/** - * @brief Disable the CFLDO working @ 0.95V - * @note Before SMPS is switched off, the regulated voltage of the - * internal CFLDO shall be set to 1.00V. - * 1.00V. is also default operating Range 2 voltage. - * @retval None - */ -void HAL_PWREx_DisableExtSMPS_0V95(void) -{ - CLEAR_BIT(PWR->CR4, PWR_CR4_EXT_SMPS_ON); -} -#endif /* PWR_CR4_EXT_SMPS_ON */ - - -#if defined(PWR_CR1_RRSTP) -/** - * @brief Enable SRAM3 content retention in Stop 2 mode. - * @note When RRSTP bit is set, SRAM3 is powered by the low-power regulator in - * Stop 2 mode and its content is kept. - * @retval None - */ -void HAL_PWREx_EnableSRAM3ContentRetention(void) -{ - SET_BIT(PWR->CR1, PWR_CR1_RRSTP); -} - - -/** - * @brief Disable SRAM3 content retention in Stop 2 mode. - * @note When RRSTP bit is reset, SRAM3 is powered off in Stop 2 mode - * and its content is lost. - * @retval None - */ -void HAL_PWREx_DisableSRAM3ContentRetention(void) -{ - CLEAR_BIT(PWR->CR1, PWR_CR1_RRSTP); -} -#endif /* PWR_CR1_RRSTP */ - -#if defined(PWR_CR3_DSIPDEN) -/** - * @brief Enable pull-down activation on DSI pins. - * @retval None - */ -void HAL_PWREx_EnableDSIPinsPDActivation(void) -{ - SET_BIT(PWR->CR3, PWR_CR3_DSIPDEN); -} - - -/** - * @brief Disable pull-down activation on DSI pins. - * @retval None - */ -void HAL_PWREx_DisableDSIPinsPDActivation(void) -{ - CLEAR_BIT(PWR->CR3, PWR_CR3_DSIPDEN); -} -#endif /* PWR_CR3_DSIPDEN */ - -#if defined(PWR_CR2_PVME1) -/** - * @brief Enable the Power Voltage Monitoring 1: VDDUSB versus 1.2V. - * @retval None - */ -void HAL_PWREx_EnablePVM1(void) -{ - SET_BIT(PWR->CR2, PWR_PVM_1); -} - -/** - * @brief Disable the Power Voltage Monitoring 1: VDDUSB versus 1.2V. - * @retval None - */ -void HAL_PWREx_DisablePVM1(void) -{ - CLEAR_BIT(PWR->CR2, PWR_PVM_1); -} -#endif /* PWR_CR2_PVME1 */ - - -#if defined(PWR_CR2_PVME2) -/** - * @brief Enable the Power Voltage Monitoring 2: VDDIO2 versus 0.9V. - * @retval None - */ -void HAL_PWREx_EnablePVM2(void) -{ - SET_BIT(PWR->CR2, PWR_PVM_2); -} - -/** - * @brief Disable the Power Voltage Monitoring 2: VDDIO2 versus 0.9V. - * @retval None - */ -void HAL_PWREx_DisablePVM2(void) -{ - CLEAR_BIT(PWR->CR2, PWR_PVM_2); -} -#endif /* PWR_CR2_PVME2 */ - - -/** - * @brief Enable the Power Voltage Monitoring 3: VDDA versus 1.62V. - * @retval None - */ -void HAL_PWREx_EnablePVM3(void) -{ - SET_BIT(PWR->CR2, PWR_PVM_3); -} - -/** - * @brief Disable the Power Voltage Monitoring 3: VDDA versus 1.62V. - * @retval None - */ -void HAL_PWREx_DisablePVM3(void) -{ - CLEAR_BIT(PWR->CR2, PWR_PVM_3); -} - - -/** - * @brief Enable the Power Voltage Monitoring 4: VDDA versus 2.2V. - * @retval None - */ -void HAL_PWREx_EnablePVM4(void) -{ - SET_BIT(PWR->CR2, PWR_PVM_4); -} - -/** - * @brief Disable the Power Voltage Monitoring 4: VDDA versus 2.2V. - * @retval None - */ -void HAL_PWREx_DisablePVM4(void) -{ - CLEAR_BIT(PWR->CR2, PWR_PVM_4); -} - - - - -/** - * @brief Configure the Peripheral Voltage Monitoring (PVM). - * @param sConfigPVM: pointer to a PWR_PVMTypeDef structure that contains the - * PVM configuration information. - * @note The API configures a single PVM according to the information contained - * in the input structure. To configure several PVMs, the API must be singly - * called for each PVM used. - * @note Refer to the electrical characteristics of your device datasheet for - * more details about the voltage thresholds corresponding to each - * detection level and to each monitored supply. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_PWREx_ConfigPVM(PWR_PVMTypeDef *sConfigPVM) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Check the parameters */ - assert_param(IS_PWR_PVM_TYPE(sConfigPVM->PVMType)); - assert_param(IS_PWR_PVM_MODE(sConfigPVM->Mode)); - - - /* Configure EXTI 35 to 38 interrupts if so required: - scan thru PVMType to detect which PVMx is set and - configure the corresponding EXTI line accordingly. */ - switch (sConfigPVM->PVMType) - { -#if defined(PWR_CR2_PVME1) - case PWR_PVM_1: - /* Clear any previous config. Keep it clear if no event or IT mode is selected */ - __HAL_PWR_PVM1_EXTI_DISABLE_EVENT(); - __HAL_PWR_PVM1_EXTI_DISABLE_IT(); - __HAL_PWR_PVM1_EXTI_DISABLE_FALLING_EDGE(); - __HAL_PWR_PVM1_EXTI_DISABLE_RISING_EDGE(); - - /* Configure interrupt mode */ - if((sConfigPVM->Mode & PVM_MODE_IT) == PVM_MODE_IT) - { - __HAL_PWR_PVM1_EXTI_ENABLE_IT(); - } - - /* Configure event mode */ - if((sConfigPVM->Mode & PVM_MODE_EVT) == PVM_MODE_EVT) - { - __HAL_PWR_PVM1_EXTI_ENABLE_EVENT(); - } - - /* Configure the edge */ - if((sConfigPVM->Mode & PVM_RISING_EDGE) == PVM_RISING_EDGE) - { - __HAL_PWR_PVM1_EXTI_ENABLE_RISING_EDGE(); - } - - if((sConfigPVM->Mode & PVM_FALLING_EDGE) == PVM_FALLING_EDGE) - { - __HAL_PWR_PVM1_EXTI_ENABLE_FALLING_EDGE(); - } - break; -#endif /* PWR_CR2_PVME1 */ - -#if defined(PWR_CR2_PVME2) - case PWR_PVM_2: - /* Clear any previous config. Keep it clear if no event or IT mode is selected */ - __HAL_PWR_PVM2_EXTI_DISABLE_EVENT(); - __HAL_PWR_PVM2_EXTI_DISABLE_IT(); - __HAL_PWR_PVM2_EXTI_DISABLE_FALLING_EDGE(); - __HAL_PWR_PVM2_EXTI_DISABLE_RISING_EDGE(); - - /* Configure interrupt mode */ - if((sConfigPVM->Mode & PVM_MODE_IT) == PVM_MODE_IT) - { - __HAL_PWR_PVM2_EXTI_ENABLE_IT(); - } - - /* Configure event mode */ - if((sConfigPVM->Mode & PVM_MODE_EVT) == PVM_MODE_EVT) - { - __HAL_PWR_PVM2_EXTI_ENABLE_EVENT(); - } - - /* Configure the edge */ - if((sConfigPVM->Mode & PVM_RISING_EDGE) == PVM_RISING_EDGE) - { - __HAL_PWR_PVM2_EXTI_ENABLE_RISING_EDGE(); - } - - if((sConfigPVM->Mode & PVM_FALLING_EDGE) == PVM_FALLING_EDGE) - { - __HAL_PWR_PVM2_EXTI_ENABLE_FALLING_EDGE(); - } - break; -#endif /* PWR_CR2_PVME2 */ - - case PWR_PVM_3: - /* Clear any previous config. Keep it clear if no event or IT mode is selected */ - __HAL_PWR_PVM3_EXTI_DISABLE_EVENT(); - __HAL_PWR_PVM3_EXTI_DISABLE_IT(); - __HAL_PWR_PVM3_EXTI_DISABLE_FALLING_EDGE(); - __HAL_PWR_PVM3_EXTI_DISABLE_RISING_EDGE(); - - /* Configure interrupt mode */ - if((sConfigPVM->Mode & PVM_MODE_IT) == PVM_MODE_IT) - { - __HAL_PWR_PVM3_EXTI_ENABLE_IT(); - } - - /* Configure event mode */ - if((sConfigPVM->Mode & PVM_MODE_EVT) == PVM_MODE_EVT) - { - __HAL_PWR_PVM3_EXTI_ENABLE_EVENT(); - } - - /* Configure the edge */ - if((sConfigPVM->Mode & PVM_RISING_EDGE) == PVM_RISING_EDGE) - { - __HAL_PWR_PVM3_EXTI_ENABLE_RISING_EDGE(); - } - - if((sConfigPVM->Mode & PVM_FALLING_EDGE) == PVM_FALLING_EDGE) - { - __HAL_PWR_PVM3_EXTI_ENABLE_FALLING_EDGE(); - } - break; - - case PWR_PVM_4: - /* Clear any previous config. Keep it clear if no event or IT mode is selected */ - __HAL_PWR_PVM4_EXTI_DISABLE_EVENT(); - __HAL_PWR_PVM4_EXTI_DISABLE_IT(); - __HAL_PWR_PVM4_EXTI_DISABLE_FALLING_EDGE(); - __HAL_PWR_PVM4_EXTI_DISABLE_RISING_EDGE(); - - /* Configure interrupt mode */ - if((sConfigPVM->Mode & PVM_MODE_IT) == PVM_MODE_IT) - { - __HAL_PWR_PVM4_EXTI_ENABLE_IT(); - } - - /* Configure event mode */ - if((sConfigPVM->Mode & PVM_MODE_EVT) == PVM_MODE_EVT) - { - __HAL_PWR_PVM4_EXTI_ENABLE_EVENT(); - } - - /* Configure the edge */ - if((sConfigPVM->Mode & PVM_RISING_EDGE) == PVM_RISING_EDGE) - { - __HAL_PWR_PVM4_EXTI_ENABLE_RISING_EDGE(); - } - - if((sConfigPVM->Mode & PVM_FALLING_EDGE) == PVM_FALLING_EDGE) - { - __HAL_PWR_PVM4_EXTI_ENABLE_FALLING_EDGE(); - } - break; - - default: - status = HAL_ERROR; - break; - } - - return status; -} - - - -/** - * @brief Enter Low-power Run mode - * @note In Low-power Run mode, all I/O pins keep the same state as in Run mode. - * @note When Regulator is set to PWR_LOWPOWERREGULATOR_ON, the user can optionally configure the - * Flash in power-down monde in setting the RUN_PD bit in FLASH_ACR register. - * Additionally, the clock frequency must be reduced below 2 MHz. - * Setting RUN_PD in FLASH_ACR then appropriately reducing the clock frequency must - * be done before calling HAL_PWREx_EnableLowPowerRunMode() API. - * @retval None - */ -void HAL_PWREx_EnableLowPowerRunMode(void) -{ - /* Set Regulator parameter */ - SET_BIT(PWR->CR1, PWR_CR1_LPR); -} - - -/** - * @brief Exit Low-power Run mode. - * @note Before HAL_PWREx_DisableLowPowerRunMode() completion, the function checks that - * REGLPF has been properly reset (otherwise, HAL_PWREx_DisableLowPowerRunMode - * returns HAL_TIMEOUT status). The system clock frequency can then be - * increased above 2 MHz. - * @retval HAL Status - */ -HAL_StatusTypeDef HAL_PWREx_DisableLowPowerRunMode(void) -{ - uint32_t wait_loop_index; - - /* Clear LPR bit */ - CLEAR_BIT(PWR->CR1, PWR_CR1_LPR); - - /* Wait until REGLPF is reset */ - wait_loop_index = ((PWR_FLAG_SETTING_DELAY_US * SystemCoreClock) / 1000000U) + 1U; - while ((HAL_IS_BIT_SET(PWR->SR2, PWR_SR2_REGLPF)) && (wait_loop_index != 0U)) - { - wait_loop_index--; - } - if (HAL_IS_BIT_SET(PWR->SR2, PWR_SR2_REGLPF)) - { - return HAL_TIMEOUT; - } - - return HAL_OK; -} - - -/** - * @brief Enter Stop 0 mode. - * @note In Stop 0 mode, main and low voltage regulators are ON. - * @note In Stop 0 mode, all I/O pins keep the same state as in Run mode. - * @note All clocks in the VCORE domain are stopped; the PLL, the MSI, - * the HSI and the HSE oscillators are disabled. Some peripherals with the wakeup capability - * (I2Cx, USARTx and LPUART) can switch on the HSI to receive a frame, and switch off the HSI - * after receiving the frame if it is not a wakeup frame. In this case, the HSI clock is propagated - * only to the peripheral requesting it. - * SRAM1, SRAM2 and register contents are preserved. - * The BOR is available. - * @note When exiting Stop 0 mode by issuing an interrupt or a wakeup event, - * the HSI RC oscillator is selected as system clock if STOPWUCK bit in RCC_CFGR register - * is set; the MSI oscillator is selected if STOPWUCK is cleared. - * @note By keeping the internal regulator ON during Stop 0 mode, the consumption - * is higher although the startup time is reduced. - * @param STOPEntry specifies if Stop mode in entered with WFI or WFE instruction. - * This parameter can be one of the following values: - * @arg @ref PWR_STOPENTRY_WFI Enter Stop mode with WFI instruction - * @arg @ref PWR_STOPENTRY_WFE Enter Stop mode with WFE instruction - * @retval None - */ -void HAL_PWREx_EnterSTOP0Mode(uint8_t STOPEntry) -{ - /* Check the parameters */ - assert_param(IS_PWR_STOP_ENTRY(STOPEntry)); - - /* Stop 0 mode with Main Regulator */ - MODIFY_REG(PWR->CR1, PWR_CR1_LPMS, PWR_CR1_LPMS_STOP0); - - /* Set SLEEPDEEP bit of Cortex System Control Register */ - SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk)); - - /* Select Stop mode entry --------------------------------------------------*/ - if(STOPEntry == PWR_STOPENTRY_WFI) - { - /* Request Wait For Interrupt */ - __WFI(); - } - else - { - /* Request Wait For Event */ - __SEV(); - __WFE(); - __WFE(); - } - - /* Reset SLEEPDEEP bit of Cortex System Control Register */ - CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk)); -} - - -/** - * @brief Enter Stop 1 mode. - * @note In Stop 1 mode, only low power voltage regulator is ON. - * @note In Stop 1 mode, all I/O pins keep the same state as in Run mode. - * @note All clocks in the VCORE domain are stopped; the PLL, the MSI, - * the HSI and the HSE oscillators are disabled. Some peripherals with the wakeup capability - * (I2Cx, USARTx and LPUART) can switch on the HSI to receive a frame, and switch off the HSI - * after receiving the frame if it is not a wakeup frame. In this case, the HSI clock is propagated - * only to the peripheral requesting it. - * SRAM1, SRAM2 and register contents are preserved. - * The BOR is available. - * @note When exiting Stop 1 mode by issuing an interrupt or a wakeup event, - * the HSI RC oscillator is selected as system clock if STOPWUCK bit in RCC_CFGR register - * is set; the MSI oscillator is selected if STOPWUCK is cleared. - * @note Due to low power mode, an additional startup delay is incurred when waking up from Stop 1 mode. - * @param STOPEntry specifies if Stop mode in entered with WFI or WFE instruction. - * This parameter can be one of the following values: - * @arg @ref PWR_STOPENTRY_WFI Enter Stop mode with WFI instruction - * @arg @ref PWR_STOPENTRY_WFE Enter Stop mode with WFE instruction - * @retval None - */ -void HAL_PWREx_EnterSTOP1Mode(uint8_t STOPEntry) -{ - /* Check the parameters */ - assert_param(IS_PWR_STOP_ENTRY(STOPEntry)); - - /* Stop 1 mode with Low-Power Regulator */ - MODIFY_REG(PWR->CR1, PWR_CR1_LPMS, PWR_CR1_LPMS_STOP1); - - /* Set SLEEPDEEP bit of Cortex System Control Register */ - SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk)); - - /* Select Stop mode entry --------------------------------------------------*/ - if(STOPEntry == PWR_STOPENTRY_WFI) - { - /* Request Wait For Interrupt */ - __WFI(); - } - else - { - /* Request Wait For Event */ - __SEV(); - __WFE(); - __WFE(); - } - - /* Reset SLEEPDEEP bit of Cortex System Control Register */ - CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk)); -} - - -/** - * @brief Enter Stop 2 mode. - * @note In Stop 2 mode, only low power voltage regulator is ON. - * @note In Stop 2 mode, all I/O pins keep the same state as in Run mode. - * @note All clocks in the VCORE domain are stopped, the PLL, the MSI, - * the HSI and the HSE oscillators are disabled. Some peripherals with wakeup capability - * (LCD, LPTIM1, I2C3 and LPUART) can switch on the HSI to receive a frame, and switch off the HSI after - * receiving the frame if it is not a wakeup frame. In this case the HSI clock is propagated only - * to the peripheral requesting it. - * SRAM1, SRAM2 and register contents are preserved. - * SRAM3 content is preserved depending on RRSTP bit setting (not available on all devices). - * The BOR is available. - * The voltage regulator is set in low-power mode but LPR bit must be cleared to enter stop 2 mode. - * Otherwise, Stop 1 mode is entered. - * @note When exiting Stop 2 mode by issuing an interrupt or a wakeup event, - * the HSI RC oscillator is selected as system clock if STOPWUCK bit in RCC_CFGR register - * is set; the MSI oscillator is selected if STOPWUCK is cleared. - * @param STOPEntry specifies if Stop mode in entered with WFI or WFE instruction. - * This parameter can be one of the following values: - * @arg @ref PWR_STOPENTRY_WFI Enter Stop mode with WFI instruction - * @arg @ref PWR_STOPENTRY_WFE Enter Stop mode with WFE instruction - * @retval None - */ -void HAL_PWREx_EnterSTOP2Mode(uint8_t STOPEntry) -{ - /* Check the parameter */ - assert_param(IS_PWR_STOP_ENTRY(STOPEntry)); - - /* Set Stop mode 2 */ - MODIFY_REG(PWR->CR1, PWR_CR1_LPMS, PWR_CR1_LPMS_STOP2); - - /* Set SLEEPDEEP bit of Cortex System Control Register */ - SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk)); - - /* Select Stop mode entry --------------------------------------------------*/ - if(STOPEntry == PWR_STOPENTRY_WFI) - { - /* Request Wait For Interrupt */ - __WFI(); - } - else - { - /* Request Wait For Event */ - __SEV(); - __WFE(); - __WFE(); - } - - /* Reset SLEEPDEEP bit of Cortex System Control Register */ - CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk)); -} - - - - - -/** - * @brief Enter Shutdown mode. - * @note In Shutdown mode, the PLL, the HSI, the MSI, the LSI and the HSE oscillators are switched - * off. The voltage regulator is disabled and Vcore domain is powered off. - * SRAM1, SRAM2 and registers contents are lost except for registers in the Backup domain. - * The BOR is not available. - * @note The I/Os can be configured either with a pull-up or pull-down or can be kept in analog state. - * @retval None - */ -void HAL_PWREx_EnterSHUTDOWNMode(void) -{ - - /* Set Shutdown mode */ - MODIFY_REG(PWR->CR1, PWR_CR1_LPMS, PWR_CR1_LPMS_SHUTDOWN); - - /* Set SLEEPDEEP bit of Cortex System Control Register */ - SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk)); - -/* This option is used to ensure that store operations are completed */ -#if defined ( __CC_ARM) - __force_stores(); -#endif - /* Request Wait For Interrupt */ - __WFI(); -} - - - - -/** - * @brief This function handles the PWR PVD/PVMx interrupt request. - * @note This API should be called under the PVD_PVM_IRQHandler(). - * @retval None - */ -void HAL_PWREx_PVD_PVM_IRQHandler(void) -{ - /* Check PWR exti flag */ - if(__HAL_PWR_PVD_EXTI_GET_FLAG() != 0x0U) - { - /* PWR PVD interrupt user callback */ - HAL_PWR_PVDCallback(); - - /* Clear PVD exti pending bit */ - __HAL_PWR_PVD_EXTI_CLEAR_FLAG(); - } - /* Next, successively check PVMx exti flags */ -#if defined(PWR_CR2_PVME1) - if(__HAL_PWR_PVM1_EXTI_GET_FLAG() != 0x0U) - { - /* PWR PVM1 interrupt user callback */ - HAL_PWREx_PVM1Callback(); - - /* Clear PVM1 exti pending bit */ - __HAL_PWR_PVM1_EXTI_CLEAR_FLAG(); - } -#endif /* PWR_CR2_PVME1 */ -#if defined(PWR_CR2_PVME2) - if(__HAL_PWR_PVM2_EXTI_GET_FLAG() != 0x0U) - { - /* PWR PVM2 interrupt user callback */ - HAL_PWREx_PVM2Callback(); - - /* Clear PVM2 exti pending bit */ - __HAL_PWR_PVM2_EXTI_CLEAR_FLAG(); - } -#endif /* PWR_CR2_PVME2 */ - if(__HAL_PWR_PVM3_EXTI_GET_FLAG() != 0x0U) - { - /* PWR PVM3 interrupt user callback */ - HAL_PWREx_PVM3Callback(); - - /* Clear PVM3 exti pending bit */ - __HAL_PWR_PVM3_EXTI_CLEAR_FLAG(); - } - if(__HAL_PWR_PVM4_EXTI_GET_FLAG() != 0x0U) - { - /* PWR PVM4 interrupt user callback */ - HAL_PWREx_PVM4Callback(); - - /* Clear PVM4 exti pending bit */ - __HAL_PWR_PVM4_EXTI_CLEAR_FLAG(); - } -} - - -#if defined(PWR_CR2_PVME1) -/** - * @brief PWR PVM1 interrupt callback - * @retval None - */ -__weak void HAL_PWREx_PVM1Callback(void) -{ - /* NOTE : This function should not be modified; when the callback is needed, - HAL_PWREx_PVM1Callback() API can be implemented in the user file - */ -} -#endif /* PWR_CR2_PVME1 */ - -#if defined(PWR_CR2_PVME2) -/** - * @brief PWR PVM2 interrupt callback - * @retval None - */ -__weak void HAL_PWREx_PVM2Callback(void) -{ - /* NOTE : This function should not be modified; when the callback is needed, - HAL_PWREx_PVM2Callback() API can be implemented in the user file - */ -} -#endif /* PWR_CR2_PVME2 */ - -/** - * @brief PWR PVM3 interrupt callback - * @retval None - */ -__weak void HAL_PWREx_PVM3Callback(void) -{ - /* NOTE : This function should not be modified; when the callback is needed, - HAL_PWREx_PVM3Callback() API can be implemented in the user file - */ -} - -/** - * @brief PWR PVM4 interrupt callback - * @retval None - */ -__weak void HAL_PWREx_PVM4Callback(void) -{ - /* NOTE : This function should not be modified; when the callback is needed, - HAL_PWREx_PVM4Callback() API can be implemented in the user file - */ -} - - -/** - * @} - */ - -/** - * @} - */ - -#endif /* HAL_PWR_MODULE_ENABLED */ -/** - * @} - */ - -/** - * @} - */ +/** + ****************************************************************************** + * @file stm32l4xx_hal_pwr_ex.c + * @author MCD Application Team + * @brief Extended PWR HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Power Controller (PWR) peripheral: + * + Extended Initialization and de-initialization functions + * + Extended Peripheral Control functions + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l4xx_hal.h" + +/** @addtogroup STM32L4xx_HAL_Driver + * @{ + */ + +/** @defgroup PWREx PWREx + * @brief PWR Extended HAL module driver + * @{ + */ + +#ifdef HAL_PWR_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ + +#if defined (STM32L412xx) || defined (STM32L422xx) || defined (STM32L431xx) || defined (STM32L432xx) || defined (STM32L433xx) || defined (STM32L442xx) || defined (STM32L443xx) +#define PWR_PORTH_AVAILABLE_PINS ((uint32_t)0x0000000B) /* PH0/PH1/PH3 */ +#elif defined (STM32L451xx) || defined (STM32L452xx) || defined (STM32L462xx) +#define PWR_PORTH_AVAILABLE_PINS ((uint32_t)0x0000000B) /* PH0/PH1/PH3 */ +#elif defined (STM32L471xx) || defined (STM32L475xx) || defined (STM32L476xx) || defined (STM32L485xx) || defined (STM32L486xx) +#define PWR_PORTH_AVAILABLE_PINS ((uint32_t)0x00000003) /* PH0/PH1 */ +#elif defined (STM32L496xx) || defined (STM32L4A6xx) || defined (STM32L4P5xx) || defined (STM32L4Q5xx) || defined (STM32L4R5xx) || defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined (STM32L4S9xx) +#define PWR_PORTH_AVAILABLE_PINS ((uint32_t)0x0000FFFF) /* PH0..PH15 */ +#endif + +#if defined (STM32L496xx) || defined (STM32L4A6xx) || defined (STM32L4P5xx) || defined (STM32L4Q5xx) || defined (STM32L4R5xx) || defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined (STM32L4S9xx) +#define PWR_PORTI_AVAILABLE_PINS ((uint32_t)0x00000FFF) /* PI0..PI11 */ +#endif + +/** @defgroup PWR_Extended_Private_Defines PWR Extended Private Defines + * @{ + */ + +/** @defgroup PWREx_PVM_Mode_Mask PWR PVM Mode Mask + * @{ + */ +#define PVM_MODE_IT ((uint32_t)0x00010000) /*!< Mask for interruption yielded by PVM threshold crossing */ +#define PVM_MODE_EVT ((uint32_t)0x00020000) /*!< Mask for event yielded by PVM threshold crossing */ +#define PVM_RISING_EDGE ((uint32_t)0x00000001) /*!< Mask for rising edge set as PVM trigger */ +#define PVM_FALLING_EDGE ((uint32_t)0x00000002) /*!< Mask for falling edge set as PVM trigger */ +/** + * @} + */ + +/** @defgroup PWREx_TimeOut_Value PWR Extended Flag Setting Time Out Value + * @{ + */ +#define PWR_FLAG_SETTING_DELAY_US 50UL /*!< Time out value for REGLPF and VOSF flags setting */ +/** + * @} + */ + + + +/** + * @} + */ + + + +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup PWREx_Exported_Functions PWR Extended Exported Functions + * @{ + */ + +/** @defgroup PWREx_Exported_Functions_Group1 Extended Peripheral Control functions + * @brief Extended Peripheral Control functions + * +@verbatim + =============================================================================== + ##### Extended Peripheral Initialization and de-initialization functions ##### + =============================================================================== + [..] + +@endverbatim + * @{ + */ + + +/** + * @brief Return Voltage Scaling Range. + * @retval VOS bit field (PWR_REGULATOR_VOLTAGE_SCALE1 or PWR_REGULATOR_VOLTAGE_SCALE2 + * or PWR_REGULATOR_VOLTAGE_SCALE1_BOOST when applicable) + */ +uint32_t HAL_PWREx_GetVoltageRange(void) +{ +#if defined(PWR_CR5_R1MODE) + if (READ_BIT(PWR->CR1, PWR_CR1_VOS) == PWR_REGULATOR_VOLTAGE_SCALE2) + { + return PWR_REGULATOR_VOLTAGE_SCALE2; + } + else if (READ_BIT(PWR->CR5, PWR_CR5_R1MODE) == PWR_CR5_R1MODE) + { + /* PWR_CR5_R1MODE bit set means that Range 1 Boost is disabled */ + return PWR_REGULATOR_VOLTAGE_SCALE1; + } + else + { + return PWR_REGULATOR_VOLTAGE_SCALE1_BOOST; + } +#else + return (PWR->CR1 & PWR_CR1_VOS); +#endif +} + + + +/** + * @brief Configure the main internal regulator output voltage. + * @param VoltageScaling specifies the regulator output voltage to achieve + * a tradeoff between performance and power consumption. + * This parameter can be one of the following values: + @if STM32L4S9xx + * @arg @ref PWR_REGULATOR_VOLTAGE_SCALE1_BOOST when available, Regulator voltage output range 1 boost mode, + * typical output voltage at 1.2 V, + * system frequency up to 120 MHz. + @endif + * @arg @ref PWR_REGULATOR_VOLTAGE_SCALE1 Regulator voltage output range 1 mode, + * typical output voltage at 1.2 V, + * system frequency up to 80 MHz. + * @arg @ref PWR_REGULATOR_VOLTAGE_SCALE2 Regulator voltage output range 2 mode, + * typical output voltage at 1.0 V, + * system frequency up to 26 MHz. + * @note When moving from Range 1 to Range 2, the system frequency must be decreased to + * a value below 26 MHz before calling HAL_PWREx_ControlVoltageScaling() API. + * When moving from Range 2 to Range 1, the system frequency can be increased to + * a value up to 80 MHz after calling HAL_PWREx_ControlVoltageScaling() API. For + * some devices, the system frequency can be increased up to 120 MHz. + * @note When moving from Range 2 to Range 1, the API waits for VOSF flag to be + * cleared before returning the status. If the flag is not cleared within + * 50 microseconds, HAL_TIMEOUT status is reported. + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_PWREx_ControlVoltageScaling(uint32_t VoltageScaling) +{ + uint32_t wait_loop_index; + + assert_param(IS_PWR_VOLTAGE_SCALING_RANGE(VoltageScaling)); + +#if defined(PWR_CR5_R1MODE) + if (VoltageScaling == PWR_REGULATOR_VOLTAGE_SCALE1_BOOST) + { + /* If current range is range 2 */ + if (READ_BIT(PWR->CR1, PWR_CR1_VOS) == PWR_REGULATOR_VOLTAGE_SCALE2) + { + /* Make sure Range 1 Boost is enabled */ + CLEAR_BIT(PWR->CR5, PWR_CR5_R1MODE); + + /* Set Range 1 */ + MODIFY_REG(PWR->CR1, PWR_CR1_VOS, PWR_REGULATOR_VOLTAGE_SCALE1); + + /* Wait until VOSF is cleared */ + wait_loop_index = ((PWR_FLAG_SETTING_DELAY_US * SystemCoreClock) / 1000000U) + 1; + while ((HAL_IS_BIT_SET(PWR->SR2, PWR_SR2_VOSF)) && (wait_loop_index != 0U)) + { + wait_loop_index--; + } + if (HAL_IS_BIT_SET(PWR->SR2, PWR_SR2_VOSF)) + { + return HAL_TIMEOUT; + } + } + /* If current range is range 1 normal or boost mode */ + else + { + /* Enable Range 1 Boost (no issue if bit already reset) */ + CLEAR_BIT(PWR->CR5, PWR_CR5_R1MODE); + } + } + else if (VoltageScaling == PWR_REGULATOR_VOLTAGE_SCALE1) + { + /* If current range is range 2 */ + if (READ_BIT(PWR->CR1, PWR_CR1_VOS) == PWR_REGULATOR_VOLTAGE_SCALE2) + { + /* Make sure Range 1 Boost is disabled */ + SET_BIT(PWR->CR5, PWR_CR5_R1MODE); + + /* Set Range 1 */ + MODIFY_REG(PWR->CR1, PWR_CR1_VOS, PWR_REGULATOR_VOLTAGE_SCALE1); + + /* Wait until VOSF is cleared */ + wait_loop_index = ((PWR_FLAG_SETTING_DELAY_US * SystemCoreClock) / 1000000U) + 1; + while ((HAL_IS_BIT_SET(PWR->SR2, PWR_SR2_VOSF)) && (wait_loop_index != 0U)) + { + wait_loop_index--; + } + if (HAL_IS_BIT_SET(PWR->SR2, PWR_SR2_VOSF)) + { + return HAL_TIMEOUT; + } + } + /* If current range is range 1 normal or boost mode */ + else + { + /* Disable Range 1 Boost (no issue if bit already set) */ + SET_BIT(PWR->CR5, PWR_CR5_R1MODE); + } + } + else + { + /* Set Range 2 */ + MODIFY_REG(PWR->CR1, PWR_CR1_VOS, PWR_REGULATOR_VOLTAGE_SCALE2); + /* No need to wait for VOSF to be cleared for this transition */ + /* PWR_CR5_R1MODE bit setting has no effect in Range 2 */ + } + +#else + + /* If Set Range 1 */ + if (VoltageScaling == PWR_REGULATOR_VOLTAGE_SCALE1) + { + if (READ_BIT(PWR->CR1, PWR_CR1_VOS) != PWR_REGULATOR_VOLTAGE_SCALE1) + { + /* Set Range 1 */ + MODIFY_REG(PWR->CR1, PWR_CR1_VOS, PWR_REGULATOR_VOLTAGE_SCALE1); + + /* Wait until VOSF is cleared */ + wait_loop_index = ((PWR_FLAG_SETTING_DELAY_US * SystemCoreClock) / 1000000U) + 1U; + while ((HAL_IS_BIT_SET(PWR->SR2, PWR_SR2_VOSF)) && (wait_loop_index != 0U)) + { + wait_loop_index--; + } + if (HAL_IS_BIT_SET(PWR->SR2, PWR_SR2_VOSF)) + { + return HAL_TIMEOUT; + } + } + } + else + { + if (READ_BIT(PWR->CR1, PWR_CR1_VOS) != PWR_REGULATOR_VOLTAGE_SCALE2) + { + /* Set Range 2 */ + MODIFY_REG(PWR->CR1, PWR_CR1_VOS, PWR_REGULATOR_VOLTAGE_SCALE2); + /* No need to wait for VOSF to be cleared for this transition */ + } + } +#endif + + return HAL_OK; +} + + +/** + * @brief Enable battery charging. + * When VDD is present, charge the external battery on VBAT through an internal resistor. + * @param ResistorSelection specifies the resistor impedance. + * This parameter can be one of the following values: + * @arg @ref PWR_BATTERY_CHARGING_RESISTOR_5 5 kOhms resistor + * @arg @ref PWR_BATTERY_CHARGING_RESISTOR_1_5 1.5 kOhms resistor + * @retval None + */ +void HAL_PWREx_EnableBatteryCharging(uint32_t ResistorSelection) +{ + assert_param(IS_PWR_BATTERY_RESISTOR_SELECT(ResistorSelection)); + + /* Specify resistor selection */ + MODIFY_REG(PWR->CR4, PWR_CR4_VBRS, ResistorSelection); + + /* Enable battery charging */ + SET_BIT(PWR->CR4, PWR_CR4_VBE); +} + + +/** + * @brief Disable battery charging. + * @retval None + */ +void HAL_PWREx_DisableBatteryCharging(void) +{ + CLEAR_BIT(PWR->CR4, PWR_CR4_VBE); +} + + +#if defined(PWR_CR2_USV) +/** + * @brief Enable VDDUSB supply. + * @note Remove VDDUSB electrical and logical isolation, once VDDUSB supply is present. + * @retval None + */ +void HAL_PWREx_EnableVddUSB(void) +{ + SET_BIT(PWR->CR2, PWR_CR2_USV); +} + + +/** + * @brief Disable VDDUSB supply. + * @retval None + */ +void HAL_PWREx_DisableVddUSB(void) +{ + CLEAR_BIT(PWR->CR2, PWR_CR2_USV); +} +#endif /* PWR_CR2_USV */ + +#if defined(PWR_CR2_IOSV) +/** + * @brief Enable VDDIO2 supply. + * @note Remove VDDIO2 electrical and logical isolation, once VDDIO2 supply is present. + * @retval None + */ +void HAL_PWREx_EnableVddIO2(void) +{ + SET_BIT(PWR->CR2, PWR_CR2_IOSV); +} + + +/** + * @brief Disable VDDIO2 supply. + * @retval None + */ +void HAL_PWREx_DisableVddIO2(void) +{ + CLEAR_BIT(PWR->CR2, PWR_CR2_IOSV); +} +#endif /* PWR_CR2_IOSV */ + + +/** + * @brief Enable Internal Wake-up Line. + * @retval None + */ +void HAL_PWREx_EnableInternalWakeUpLine(void) +{ + SET_BIT(PWR->CR3, PWR_CR3_EIWF); +} + + +/** + * @brief Disable Internal Wake-up Line. + * @retval None + */ +void HAL_PWREx_DisableInternalWakeUpLine(void) +{ + CLEAR_BIT(PWR->CR3, PWR_CR3_EIWF); +} + + + +/** + * @brief Enable GPIO pull-up state in Standby and Shutdown modes. + * @note Set the relevant PUy bits of PWR_PUCRx register to configure the I/O in + * pull-up state in Standby and Shutdown modes. + * @note This state is effective in Standby and Shutdown modes only if APC bit + * is set through HAL_PWREx_EnablePullUpPullDownConfig() API. + * @note The configuration is lost when exiting the Shutdown mode due to the + * power-on reset, maintained when exiting the Standby mode. + * @note To avoid any conflict at Standby and Shutdown modes exits, the corresponding + * PDy bit of PWR_PDCRx register is cleared unless it is reserved. + * @note Even if a PUy bit to set is reserved, the other PUy bits entered as input + * parameter at the same time are set. + * @param GPIO Specify the IO port. This parameter can be PWR_GPIO_A, ..., PWR_GPIO_H + * (or PWR_GPIO_I depending on the devices) to select the GPIO peripheral. + * @param GPIONumber Specify the I/O pins numbers. + * This parameter can be one of the following values: + * PWR_GPIO_BIT_0, ..., PWR_GPIO_BIT_15 (except for the port where less + * I/O pins are available) or the logical OR of several of them to set + * several bits for a given port in a single API call. + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_PWREx_EnableGPIOPullUp(uint32_t GPIO, uint32_t GPIONumber) +{ + HAL_StatusTypeDef status = HAL_OK; + + assert_param(IS_PWR_GPIO(GPIO)); + assert_param(IS_PWR_GPIO_BIT_NUMBER(GPIONumber)); + + switch (GPIO) + { + case PWR_GPIO_A: + SET_BIT(PWR->PUCRA, (GPIONumber & (~(PWR_GPIO_BIT_14)))); + CLEAR_BIT(PWR->PDCRA, (GPIONumber & (~(PWR_GPIO_BIT_13|PWR_GPIO_BIT_15)))); + break; + case PWR_GPIO_B: + SET_BIT(PWR->PUCRB, GPIONumber); + CLEAR_BIT(PWR->PDCRB, (GPIONumber & (~(PWR_GPIO_BIT_4)))); + break; + case PWR_GPIO_C: + SET_BIT(PWR->PUCRC, GPIONumber); + CLEAR_BIT(PWR->PDCRC, GPIONumber); + break; +#if defined(GPIOD) + case PWR_GPIO_D: + SET_BIT(PWR->PUCRD, GPIONumber); + CLEAR_BIT(PWR->PDCRD, GPIONumber); + break; +#endif +#if defined(GPIOE) + case PWR_GPIO_E: + SET_BIT(PWR->PUCRE, GPIONumber); + CLEAR_BIT(PWR->PDCRE, GPIONumber); + break; +#endif +#if defined(GPIOF) + case PWR_GPIO_F: + SET_BIT(PWR->PUCRF, GPIONumber); + CLEAR_BIT(PWR->PDCRF, GPIONumber); + break; +#endif +#if defined(GPIOG) + case PWR_GPIO_G: + SET_BIT(PWR->PUCRG, GPIONumber); + CLEAR_BIT(PWR->PDCRG, GPIONumber); + break; +#endif + case PWR_GPIO_H: + SET_BIT(PWR->PUCRH, (GPIONumber & PWR_PORTH_AVAILABLE_PINS)); +#if defined (STM32L496xx) || defined (STM32L4A6xx) + CLEAR_BIT(PWR->PDCRH, ((GPIONumber & PWR_PORTH_AVAILABLE_PINS) & (~(PWR_GPIO_BIT_3)))); +#else + CLEAR_BIT(PWR->PDCRH, (GPIONumber & PWR_PORTH_AVAILABLE_PINS)); +#endif + break; +#if defined(GPIOI) + case PWR_GPIO_I: + SET_BIT(PWR->PUCRI, (GPIONumber & PWR_PORTI_AVAILABLE_PINS)); + CLEAR_BIT(PWR->PDCRI, (GPIONumber & PWR_PORTI_AVAILABLE_PINS)); + break; +#endif + default: + status = HAL_ERROR; + break; + } + + return status; +} + + +/** + * @brief Disable GPIO pull-up state in Standby mode and Shutdown modes. + * @note Reset the relevant PUy bits of PWR_PUCRx register used to configure the I/O + * in pull-up state in Standby and Shutdown modes. + * @note Even if a PUy bit to reset is reserved, the other PUy bits entered as input + * parameter at the same time are reset. + * @param GPIO Specifies the IO port. This parameter can be PWR_GPIO_A, ..., PWR_GPIO_H + * (or PWR_GPIO_I depending on the devices) to select the GPIO peripheral. + * @param GPIONumber Specify the I/O pins numbers. + * This parameter can be one of the following values: + * PWR_GPIO_BIT_0, ..., PWR_GPIO_BIT_15 (except for the port where less + * I/O pins are available) or the logical OR of several of them to reset + * several bits for a given port in a single API call. + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_PWREx_DisableGPIOPullUp(uint32_t GPIO, uint32_t GPIONumber) +{ + HAL_StatusTypeDef status = HAL_OK; + + assert_param(IS_PWR_GPIO(GPIO)); + assert_param(IS_PWR_GPIO_BIT_NUMBER(GPIONumber)); + + switch (GPIO) + { + case PWR_GPIO_A: + CLEAR_BIT(PWR->PUCRA, (GPIONumber & (~(PWR_GPIO_BIT_14)))); + break; + case PWR_GPIO_B: + CLEAR_BIT(PWR->PUCRB, GPIONumber); + break; + case PWR_GPIO_C: + CLEAR_BIT(PWR->PUCRC, GPIONumber); + break; +#if defined(GPIOD) + case PWR_GPIO_D: + CLEAR_BIT(PWR->PUCRD, GPIONumber); + break; +#endif +#if defined(GPIOE) + case PWR_GPIO_E: + CLEAR_BIT(PWR->PUCRE, GPIONumber); + break; +#endif +#if defined(GPIOF) + case PWR_GPIO_F: + CLEAR_BIT(PWR->PUCRF, GPIONumber); + break; +#endif +#if defined(GPIOG) + case PWR_GPIO_G: + CLEAR_BIT(PWR->PUCRG, GPIONumber); + break; +#endif + case PWR_GPIO_H: + CLEAR_BIT(PWR->PUCRH, (GPIONumber & PWR_PORTH_AVAILABLE_PINS)); + break; +#if defined(GPIOI) + case PWR_GPIO_I: + CLEAR_BIT(PWR->PUCRI, (GPIONumber & PWR_PORTI_AVAILABLE_PINS)); + break; +#endif + default: + status = HAL_ERROR; + break; + } + + return status; +} + + + +/** + * @brief Enable GPIO pull-down state in Standby and Shutdown modes. + * @note Set the relevant PDy bits of PWR_PDCRx register to configure the I/O in + * pull-down state in Standby and Shutdown modes. + * @note This state is effective in Standby and Shutdown modes only if APC bit + * is set through HAL_PWREx_EnablePullUpPullDownConfig() API. + * @note The configuration is lost when exiting the Shutdown mode due to the + * power-on reset, maintained when exiting the Standby mode. + * @note To avoid any conflict at Standby and Shutdown modes exits, the corresponding + * PUy bit of PWR_PUCRx register is cleared unless it is reserved. + * @note Even if a PDy bit to set is reserved, the other PDy bits entered as input + * parameter at the same time are set. + * @param GPIO Specify the IO port. This parameter can be PWR_GPIO_A..PWR_GPIO_H + * (or PWR_GPIO_I depending on the devices) to select the GPIO peripheral. + * @param GPIONumber Specify the I/O pins numbers. + * This parameter can be one of the following values: + * PWR_GPIO_BIT_0, ..., PWR_GPIO_BIT_15 (except for the port where less + * I/O pins are available) or the logical OR of several of them to set + * several bits for a given port in a single API call. + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_PWREx_EnableGPIOPullDown(uint32_t GPIO, uint32_t GPIONumber) +{ + HAL_StatusTypeDef status = HAL_OK; + + assert_param(IS_PWR_GPIO(GPIO)); + assert_param(IS_PWR_GPIO_BIT_NUMBER(GPIONumber)); + + switch (GPIO) + { + case PWR_GPIO_A: + SET_BIT(PWR->PDCRA, (GPIONumber & (~(PWR_GPIO_BIT_13|PWR_GPIO_BIT_15)))); + CLEAR_BIT(PWR->PUCRA, (GPIONumber & (~(PWR_GPIO_BIT_14)))); + break; + case PWR_GPIO_B: + SET_BIT(PWR->PDCRB, (GPIONumber & (~(PWR_GPIO_BIT_4)))); + CLEAR_BIT(PWR->PUCRB, GPIONumber); + break; + case PWR_GPIO_C: + SET_BIT(PWR->PDCRC, GPIONumber); + CLEAR_BIT(PWR->PUCRC, GPIONumber); + break; +#if defined(GPIOD) + case PWR_GPIO_D: + SET_BIT(PWR->PDCRD, GPIONumber); + CLEAR_BIT(PWR->PUCRD, GPIONumber); + break; +#endif +#if defined(GPIOE) + case PWR_GPIO_E: + SET_BIT(PWR->PDCRE, GPIONumber); + CLEAR_BIT(PWR->PUCRE, GPIONumber); + break; +#endif +#if defined(GPIOF) + case PWR_GPIO_F: + SET_BIT(PWR->PDCRF, GPIONumber); + CLEAR_BIT(PWR->PUCRF, GPIONumber); + break; +#endif +#if defined(GPIOG) + case PWR_GPIO_G: + SET_BIT(PWR->PDCRG, GPIONumber); + CLEAR_BIT(PWR->PUCRG, GPIONumber); + break; +#endif + case PWR_GPIO_H: +#if defined (STM32L496xx) || defined (STM32L4A6xx) + SET_BIT(PWR->PDCRH, ((GPIONumber & PWR_PORTH_AVAILABLE_PINS) & (~(PWR_GPIO_BIT_3)))); +#else + SET_BIT(PWR->PDCRH, (GPIONumber & PWR_PORTH_AVAILABLE_PINS)); +#endif + CLEAR_BIT(PWR->PUCRH, (GPIONumber & PWR_PORTH_AVAILABLE_PINS)); + break; +#if defined(GPIOI) + case PWR_GPIO_I: + SET_BIT(PWR->PDCRI, (GPIONumber & PWR_PORTI_AVAILABLE_PINS)); + CLEAR_BIT(PWR->PUCRI, (GPIONumber & PWR_PORTI_AVAILABLE_PINS)); + break; +#endif + default: + status = HAL_ERROR; + break; + } + + return status; +} + + +/** + * @brief Disable GPIO pull-down state in Standby and Shutdown modes. + * @note Reset the relevant PDy bits of PWR_PDCRx register used to configure the I/O + * in pull-down state in Standby and Shutdown modes. + * @note Even if a PDy bit to reset is reserved, the other PDy bits entered as input + * parameter at the same time are reset. + * @param GPIO Specifies the IO port. This parameter can be PWR_GPIO_A..PWR_GPIO_H + * (or PWR_GPIO_I depending on the devices) to select the GPIO peripheral. + * @param GPIONumber Specify the I/O pins numbers. + * This parameter can be one of the following values: + * PWR_GPIO_BIT_0, ..., PWR_GPIO_BIT_15 (except for the port where less + * I/O pins are available) or the logical OR of several of them to reset + * several bits for a given port in a single API call. + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_PWREx_DisableGPIOPullDown(uint32_t GPIO, uint32_t GPIONumber) +{ + HAL_StatusTypeDef status = HAL_OK; + + assert_param(IS_PWR_GPIO(GPIO)); + assert_param(IS_PWR_GPIO_BIT_NUMBER(GPIONumber)); + + switch (GPIO) + { + case PWR_GPIO_A: + CLEAR_BIT(PWR->PDCRA, (GPIONumber & (~(PWR_GPIO_BIT_13|PWR_GPIO_BIT_15)))); + break; + case PWR_GPIO_B: + CLEAR_BIT(PWR->PDCRB, (GPIONumber & (~(PWR_GPIO_BIT_4)))); + break; + case PWR_GPIO_C: + CLEAR_BIT(PWR->PDCRC, GPIONumber); + break; +#if defined(GPIOD) + case PWR_GPIO_D: + CLEAR_BIT(PWR->PDCRD, GPIONumber); + break; +#endif +#if defined(GPIOE) + case PWR_GPIO_E: + CLEAR_BIT(PWR->PDCRE, GPIONumber); + break; +#endif +#if defined(GPIOF) + case PWR_GPIO_F: + CLEAR_BIT(PWR->PDCRF, GPIONumber); + break; +#endif +#if defined(GPIOG) + case PWR_GPIO_G: + CLEAR_BIT(PWR->PDCRG, GPIONumber); + break; +#endif + case PWR_GPIO_H: +#if defined (STM32L496xx) || defined (STM32L4A6xx) + CLEAR_BIT(PWR->PDCRH, ((GPIONumber & PWR_PORTH_AVAILABLE_PINS) & (~(PWR_GPIO_BIT_3)))); +#else + CLEAR_BIT(PWR->PDCRH, (GPIONumber & PWR_PORTH_AVAILABLE_PINS)); +#endif + break; +#if defined(GPIOI) + case PWR_GPIO_I: + CLEAR_BIT(PWR->PDCRI, (GPIONumber & PWR_PORTI_AVAILABLE_PINS)); + break; +#endif + default: + status = HAL_ERROR; + break; + } + + return status; +} + + + +/** + * @brief Enable pull-up and pull-down configuration. + * @note When APC bit is set, the I/O pull-up and pull-down configurations defined in + * PWR_PUCRx and PWR_PDCRx registers are applied in Standby and Shutdown modes. + * @note Pull-up set by PUy bit of PWR_PUCRx register is not activated if the corresponding + * PDy bit of PWR_PDCRx register is also set (pull-down configuration priority is higher). + * HAL_PWREx_EnableGPIOPullUp() and HAL_PWREx_EnableGPIOPullDown() API's ensure there + * is no conflict when setting PUy or PDy bit. + * @retval None + */ +void HAL_PWREx_EnablePullUpPullDownConfig(void) +{ + SET_BIT(PWR->CR3, PWR_CR3_APC); +} + + +/** + * @brief Disable pull-up and pull-down configuration. + * @note When APC bit is cleared, the I/O pull-up and pull-down configurations defined in + * PWR_PUCRx and PWR_PDCRx registers are not applied in Standby and Shutdown modes. + * @retval None + */ +void HAL_PWREx_DisablePullUpPullDownConfig(void) +{ + CLEAR_BIT(PWR->CR3, PWR_CR3_APC); +} + + + +/** + * @brief Enable Full SRAM2 content retention in Standby mode. + * @retval None + */ +void HAL_PWREx_EnableSRAM2ContentRetention(void) +{ + (void) HAL_PWREx_SetSRAM2ContentRetention(PWR_FULL_SRAM2_RETENTION); +} + +/** + * @brief Disable SRAM2 content retention in Standby mode. + * @retval None + */ +void HAL_PWREx_DisableSRAM2ContentRetention(void) +{ + (void) HAL_PWREx_SetSRAM2ContentRetention(PWR_NO_SRAM2_RETENTION); +} + +/** + * @brief Enable SRAM2 content retention in Standby mode. + * @param SRAM2Size: specifies the SRAM2 size kept in Standby mode + * This parameter can be one of the following values: + * @arg @ref PWR_NO_SRAM2_RETENTION SRAM2 is powered off in Standby mode (SRAM2 content is lost) + * @arg @ref PWR_FULL_SRAM2_RETENTION Full SRAM2 is powered by the low-power regulator in Standby mode + * @arg @ref PWR_4KBYTES_SRAM2_RETENTION Only 4 Kbytes of SRAM2 is powered by the low-power regulator in Standby mode + * @note PWR_4KBYTES_SRAM2_RETENTION parameter is not available on all devices + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_PWREx_SetSRAM2ContentRetention(uint32_t SRAM2Size) +{ + assert_param(IS_PWR_SRAM2_RETENTION(SRAM2Size)); + + if (SRAM2Size == PWR_NO_SRAM2_RETENTION) + { + CLEAR_BIT(PWR->CR3, PWR_CR3_RRS); + } + else if (SRAM2Size == PWR_FULL_SRAM2_RETENTION) + { + MODIFY_REG(PWR->CR3, PWR_CR3_RRS, PWR_FULL_SRAM2_RETENTION); + } +#if defined(PWR_CR3_RRS_1) + else if (SRAM2Size == PWR_4KBYTES_SRAM2_RETENTION) + { + MODIFY_REG(PWR->CR3, PWR_CR3_RRS, PWR_4KBYTES_SRAM2_RETENTION); + } +#endif /* PWR_CR3_RRS_1 */ + else { + return HAL_ERROR; + } + + return HAL_OK; +} + + +#if defined(PWR_CR3_ENULP) +/** + * @brief Enable Ultra Low Power BORL, BORH and PVD for STOP2 and Standby modes. + * @note All the other modes are not affected by this bit. + * @retval None + */ +void HAL_PWREx_EnableBORPVD_ULP(void) +{ + SET_BIT(PWR->CR3, PWR_CR3_ENULP); +} + + +/** + * @brief Disable Ultra Low Power BORL, BORH and PVD for STOP2 and Standby modes. + * @note All the other modes are not affected by this bit + * @retval None + */ +void HAL_PWREx_DisableBORPVD_ULP(void) +{ + CLEAR_BIT(PWR->CR3, PWR_CR3_ENULP); +} +#endif /* PWR_CR3_ENULP */ + + +#if defined(PWR_CR4_EXT_SMPS_ON) +/** + * @brief Enable the CFLDO working @ 0.95V. + * @note When external SMPS is used & CFLDO operating in Range 2, the regulated voltage of the + * internal CFLDO can be reduced to 0.95V. + * @retval None + */ +void HAL_PWREx_EnableExtSMPS_0V95(void) +{ + SET_BIT(PWR->CR4, PWR_CR4_EXT_SMPS_ON); +} + +/** + * @brief Disable the CFLDO working @ 0.95V + * @note Before SMPS is switched off, the regulated voltage of the + * internal CFLDO shall be set to 1.00V. + * 1.00V. is also default operating Range 2 voltage. + * @retval None + */ +void HAL_PWREx_DisableExtSMPS_0V95(void) +{ + CLEAR_BIT(PWR->CR4, PWR_CR4_EXT_SMPS_ON); +} +#endif /* PWR_CR4_EXT_SMPS_ON */ + + +#if defined(PWR_CR1_RRSTP) +/** + * @brief Enable SRAM3 content retention in Stop 2 mode. + * @note When RRSTP bit is set, SRAM3 is powered by the low-power regulator in + * Stop 2 mode and its content is kept. + * @retval None + */ +void HAL_PWREx_EnableSRAM3ContentRetention(void) +{ + SET_BIT(PWR->CR1, PWR_CR1_RRSTP); +} + + +/** + * @brief Disable SRAM3 content retention in Stop 2 mode. + * @note When RRSTP bit is reset, SRAM3 is powered off in Stop 2 mode + * and its content is lost. + * @retval None + */ +void HAL_PWREx_DisableSRAM3ContentRetention(void) +{ + CLEAR_BIT(PWR->CR1, PWR_CR1_RRSTP); +} +#endif /* PWR_CR1_RRSTP */ + +#if defined(PWR_CR3_DSIPDEN) +/** + * @brief Enable pull-down activation on DSI pins. + * @retval None + */ +void HAL_PWREx_EnableDSIPinsPDActivation(void) +{ + SET_BIT(PWR->CR3, PWR_CR3_DSIPDEN); +} + + +/** + * @brief Disable pull-down activation on DSI pins. + * @retval None + */ +void HAL_PWREx_DisableDSIPinsPDActivation(void) +{ + CLEAR_BIT(PWR->CR3, PWR_CR3_DSIPDEN); +} +#endif /* PWR_CR3_DSIPDEN */ + +#if defined(PWR_CR2_PVME1) +/** + * @brief Enable the Power Voltage Monitoring 1: VDDUSB versus 1.2V. + * @retval None + */ +void HAL_PWREx_EnablePVM1(void) +{ + SET_BIT(PWR->CR2, PWR_PVM_1); +} + +/** + * @brief Disable the Power Voltage Monitoring 1: VDDUSB versus 1.2V. + * @retval None + */ +void HAL_PWREx_DisablePVM1(void) +{ + CLEAR_BIT(PWR->CR2, PWR_PVM_1); +} +#endif /* PWR_CR2_PVME1 */ + + +#if defined(PWR_CR2_PVME2) +/** + * @brief Enable the Power Voltage Monitoring 2: VDDIO2 versus 0.9V. + * @retval None + */ +void HAL_PWREx_EnablePVM2(void) +{ + SET_BIT(PWR->CR2, PWR_PVM_2); +} + +/** + * @brief Disable the Power Voltage Monitoring 2: VDDIO2 versus 0.9V. + * @retval None + */ +void HAL_PWREx_DisablePVM2(void) +{ + CLEAR_BIT(PWR->CR2, PWR_PVM_2); +} +#endif /* PWR_CR2_PVME2 */ + + +/** + * @brief Enable the Power Voltage Monitoring 3: VDDA versus 1.62V. + * @retval None + */ +void HAL_PWREx_EnablePVM3(void) +{ + SET_BIT(PWR->CR2, PWR_PVM_3); +} + +/** + * @brief Disable the Power Voltage Monitoring 3: VDDA versus 1.62V. + * @retval None + */ +void HAL_PWREx_DisablePVM3(void) +{ + CLEAR_BIT(PWR->CR2, PWR_PVM_3); +} + + +/** + * @brief Enable the Power Voltage Monitoring 4: VDDA versus 2.2V. + * @retval None + */ +void HAL_PWREx_EnablePVM4(void) +{ + SET_BIT(PWR->CR2, PWR_PVM_4); +} + +/** + * @brief Disable the Power Voltage Monitoring 4: VDDA versus 2.2V. + * @retval None + */ +void HAL_PWREx_DisablePVM4(void) +{ + CLEAR_BIT(PWR->CR2, PWR_PVM_4); +} + + + + +/** + * @brief Configure the Peripheral Voltage Monitoring (PVM). + * @param sConfigPVM: pointer to a PWR_PVMTypeDef structure that contains the + * PVM configuration information. + * @note The API configures a single PVM according to the information contained + * in the input structure. To configure several PVMs, the API must be singly + * called for each PVM used. + * @note Refer to the electrical characteristics of your device datasheet for + * more details about the voltage thresholds corresponding to each + * detection level and to each monitored supply. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PWREx_ConfigPVM(PWR_PVMTypeDef *sConfigPVM) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_PWR_PVM_TYPE(sConfigPVM->PVMType)); + assert_param(IS_PWR_PVM_MODE(sConfigPVM->Mode)); + + + /* Configure EXTI 35 to 38 interrupts if so required: + scan through PVMType to detect which PVMx is set and + configure the corresponding EXTI line accordingly. */ + switch (sConfigPVM->PVMType) + { +#if defined(PWR_CR2_PVME1) + case PWR_PVM_1: + /* Clear any previous config. Keep it clear if no event or IT mode is selected */ + __HAL_PWR_PVM1_EXTI_DISABLE_EVENT(); + __HAL_PWR_PVM1_EXTI_DISABLE_IT(); + __HAL_PWR_PVM1_EXTI_DISABLE_FALLING_EDGE(); + __HAL_PWR_PVM1_EXTI_DISABLE_RISING_EDGE(); + + /* Configure interrupt mode */ + if((sConfigPVM->Mode & PVM_MODE_IT) == PVM_MODE_IT) + { + __HAL_PWR_PVM1_EXTI_ENABLE_IT(); + } + + /* Configure event mode */ + if((sConfigPVM->Mode & PVM_MODE_EVT) == PVM_MODE_EVT) + { + __HAL_PWR_PVM1_EXTI_ENABLE_EVENT(); + } + + /* Configure the edge */ + if((sConfigPVM->Mode & PVM_RISING_EDGE) == PVM_RISING_EDGE) + { + __HAL_PWR_PVM1_EXTI_ENABLE_RISING_EDGE(); + } + + if((sConfigPVM->Mode & PVM_FALLING_EDGE) == PVM_FALLING_EDGE) + { + __HAL_PWR_PVM1_EXTI_ENABLE_FALLING_EDGE(); + } + break; +#endif /* PWR_CR2_PVME1 */ + +#if defined(PWR_CR2_PVME2) + case PWR_PVM_2: + /* Clear any previous config. Keep it clear if no event or IT mode is selected */ + __HAL_PWR_PVM2_EXTI_DISABLE_EVENT(); + __HAL_PWR_PVM2_EXTI_DISABLE_IT(); + __HAL_PWR_PVM2_EXTI_DISABLE_FALLING_EDGE(); + __HAL_PWR_PVM2_EXTI_DISABLE_RISING_EDGE(); + + /* Configure interrupt mode */ + if((sConfigPVM->Mode & PVM_MODE_IT) == PVM_MODE_IT) + { + __HAL_PWR_PVM2_EXTI_ENABLE_IT(); + } + + /* Configure event mode */ + if((sConfigPVM->Mode & PVM_MODE_EVT) == PVM_MODE_EVT) + { + __HAL_PWR_PVM2_EXTI_ENABLE_EVENT(); + } + + /* Configure the edge */ + if((sConfigPVM->Mode & PVM_RISING_EDGE) == PVM_RISING_EDGE) + { + __HAL_PWR_PVM2_EXTI_ENABLE_RISING_EDGE(); + } + + if((sConfigPVM->Mode & PVM_FALLING_EDGE) == PVM_FALLING_EDGE) + { + __HAL_PWR_PVM2_EXTI_ENABLE_FALLING_EDGE(); + } + break; +#endif /* PWR_CR2_PVME2 */ + + case PWR_PVM_3: + /* Clear any previous config. Keep it clear if no event or IT mode is selected */ + __HAL_PWR_PVM3_EXTI_DISABLE_EVENT(); + __HAL_PWR_PVM3_EXTI_DISABLE_IT(); + __HAL_PWR_PVM3_EXTI_DISABLE_FALLING_EDGE(); + __HAL_PWR_PVM3_EXTI_DISABLE_RISING_EDGE(); + + /* Configure interrupt mode */ + if((sConfigPVM->Mode & PVM_MODE_IT) == PVM_MODE_IT) + { + __HAL_PWR_PVM3_EXTI_ENABLE_IT(); + } + + /* Configure event mode */ + if((sConfigPVM->Mode & PVM_MODE_EVT) == PVM_MODE_EVT) + { + __HAL_PWR_PVM3_EXTI_ENABLE_EVENT(); + } + + /* Configure the edge */ + if((sConfigPVM->Mode & PVM_RISING_EDGE) == PVM_RISING_EDGE) + { + __HAL_PWR_PVM3_EXTI_ENABLE_RISING_EDGE(); + } + + if((sConfigPVM->Mode & PVM_FALLING_EDGE) == PVM_FALLING_EDGE) + { + __HAL_PWR_PVM3_EXTI_ENABLE_FALLING_EDGE(); + } + break; + + case PWR_PVM_4: + /* Clear any previous config. Keep it clear if no event or IT mode is selected */ + __HAL_PWR_PVM4_EXTI_DISABLE_EVENT(); + __HAL_PWR_PVM4_EXTI_DISABLE_IT(); + __HAL_PWR_PVM4_EXTI_DISABLE_FALLING_EDGE(); + __HAL_PWR_PVM4_EXTI_DISABLE_RISING_EDGE(); + + /* Configure interrupt mode */ + if((sConfigPVM->Mode & PVM_MODE_IT) == PVM_MODE_IT) + { + __HAL_PWR_PVM4_EXTI_ENABLE_IT(); + } + + /* Configure event mode */ + if((sConfigPVM->Mode & PVM_MODE_EVT) == PVM_MODE_EVT) + { + __HAL_PWR_PVM4_EXTI_ENABLE_EVENT(); + } + + /* Configure the edge */ + if((sConfigPVM->Mode & PVM_RISING_EDGE) == PVM_RISING_EDGE) + { + __HAL_PWR_PVM4_EXTI_ENABLE_RISING_EDGE(); + } + + if((sConfigPVM->Mode & PVM_FALLING_EDGE) == PVM_FALLING_EDGE) + { + __HAL_PWR_PVM4_EXTI_ENABLE_FALLING_EDGE(); + } + break; + + default: + status = HAL_ERROR; + break; + } + + return status; +} + + + +/** + * @brief Enter Low-power Run mode + * @note In Low-power Run mode, all I/O pins keep the same state as in Run mode. + * @note When Regulator is set to PWR_LOWPOWERREGULATOR_ON, the user can optionally configure the + * Flash in power-down monde in setting the RUN_PD bit in FLASH_ACR register. + * Additionally, the clock frequency must be reduced below 2 MHz. + * Setting RUN_PD in FLASH_ACR then appropriately reducing the clock frequency must + * be done before calling HAL_PWREx_EnableLowPowerRunMode() API. + * @retval None + */ +void HAL_PWREx_EnableLowPowerRunMode(void) +{ + /* Set Regulator parameter */ + SET_BIT(PWR->CR1, PWR_CR1_LPR); +} + + +/** + * @brief Exit Low-power Run mode. + * @note Before HAL_PWREx_DisableLowPowerRunMode() completion, the function checks that + * REGLPF has been properly reset (otherwise, HAL_PWREx_DisableLowPowerRunMode + * returns HAL_TIMEOUT status). The system clock frequency can then be + * increased above 2 MHz. + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_PWREx_DisableLowPowerRunMode(void) +{ + uint32_t wait_loop_index; + + /* Clear LPR bit */ + CLEAR_BIT(PWR->CR1, PWR_CR1_LPR); + + /* Wait until REGLPF is reset */ + wait_loop_index = ((PWR_FLAG_SETTING_DELAY_US * SystemCoreClock) / 1000000U) + 1U; + while ((HAL_IS_BIT_SET(PWR->SR2, PWR_SR2_REGLPF)) && (wait_loop_index != 0U)) + { + wait_loop_index--; + } + if (HAL_IS_BIT_SET(PWR->SR2, PWR_SR2_REGLPF)) + { + return HAL_TIMEOUT; + } + + return HAL_OK; +} + + +/** + * @brief Enter Stop 0 mode. + * @note In Stop 0 mode, main and low voltage regulators are ON. + * @note In Stop 0 mode, all I/O pins keep the same state as in Run mode. + * @note All clocks in the VCORE domain are stopped; the PLL, the MSI, + * the HSI and the HSE oscillators are disabled. Some peripherals with the wakeup capability + * (I2Cx, USARTx and LPUART) can switch on the HSI to receive a frame, and switch off the HSI + * after receiving the frame if it is not a wakeup frame. In this case, the HSI clock is propagated + * only to the peripheral requesting it. + * SRAM1, SRAM2 and register contents are preserved. + * The BOR is available. + * @note When exiting Stop 0 mode by issuing an interrupt or a wakeup event, + * the HSI RC oscillator is selected as system clock if STOPWUCK bit in RCC_CFGR register + * is set; the MSI oscillator is selected if STOPWUCK is cleared. + * @note By keeping the internal regulator ON during Stop 0 mode, the consumption + * is higher although the startup time is reduced. + * @param STOPEntry specifies if Stop mode in entered with WFI or WFE instruction. + * This parameter can be one of the following values: + * @arg @ref PWR_STOPENTRY_WFI Enter Stop mode with WFI instruction + * @arg @ref PWR_STOPENTRY_WFE Enter Stop mode with WFE instruction + * @retval None + */ +void HAL_PWREx_EnterSTOP0Mode(uint8_t STOPEntry) +{ + /* Check the parameters */ + assert_param(IS_PWR_STOP_ENTRY(STOPEntry)); + + /* Stop 0 mode with Main Regulator */ + MODIFY_REG(PWR->CR1, PWR_CR1_LPMS, PWR_CR1_LPMS_STOP0); + + /* Set SLEEPDEEP bit of Cortex System Control Register */ + SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk)); + + /* Select Stop mode entry --------------------------------------------------*/ + if(STOPEntry == PWR_STOPENTRY_WFI) + { + /* Request Wait For Interrupt */ + __WFI(); + } + else + { + /* Request Wait For Event */ + __SEV(); + __WFE(); + __WFE(); + } + + /* Reset SLEEPDEEP bit of Cortex System Control Register */ + CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk)); +} + + +/** + * @brief Enter Stop 1 mode. + * @note In Stop 1 mode, only low power voltage regulator is ON. + * @note In Stop 1 mode, all I/O pins keep the same state as in Run mode. + * @note All clocks in the VCORE domain are stopped; the PLL, the MSI, + * the HSI and the HSE oscillators are disabled. Some peripherals with the wakeup capability + * (I2Cx, USARTx and LPUART) can switch on the HSI to receive a frame, and switch off the HSI + * after receiving the frame if it is not a wakeup frame. In this case, the HSI clock is propagated + * only to the peripheral requesting it. + * SRAM1, SRAM2 and register contents are preserved. + * The BOR is available. + * @note When exiting Stop 1 mode by issuing an interrupt or a wakeup event, + * the HSI RC oscillator is selected as system clock if STOPWUCK bit in RCC_CFGR register + * is set; the MSI oscillator is selected if STOPWUCK is cleared. + * @note Due to low power mode, an additional startup delay is incurred when waking up from Stop 1 mode. + * @param STOPEntry specifies if Stop mode in entered with WFI or WFE instruction. + * This parameter can be one of the following values: + * @arg @ref PWR_STOPENTRY_WFI Enter Stop mode with WFI instruction + * @arg @ref PWR_STOPENTRY_WFE Enter Stop mode with WFE instruction + * @retval None + */ +void HAL_PWREx_EnterSTOP1Mode(uint8_t STOPEntry) +{ + /* Check the parameters */ + assert_param(IS_PWR_STOP_ENTRY(STOPEntry)); + + /* Stop 1 mode with Low-Power Regulator */ + MODIFY_REG(PWR->CR1, PWR_CR1_LPMS, PWR_CR1_LPMS_STOP1); + + /* Set SLEEPDEEP bit of Cortex System Control Register */ + SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk)); + + /* Select Stop mode entry --------------------------------------------------*/ + if(STOPEntry == PWR_STOPENTRY_WFI) + { + /* Request Wait For Interrupt */ + __WFI(); + } + else + { + /* Request Wait For Event */ + __SEV(); + __WFE(); + __WFE(); + } + + /* Reset SLEEPDEEP bit of Cortex System Control Register */ + CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk)); +} + + +/** + * @brief Enter Stop 2 mode. + * @note In Stop 2 mode, only low power voltage regulator is ON. + * @note In Stop 2 mode, all I/O pins keep the same state as in Run mode. + * @note All clocks in the VCORE domain are stopped, the PLL, the MSI, + * the HSI and the HSE oscillators are disabled. Some peripherals with wakeup capability + * (LCD, LPTIM1, I2C3 and LPUART) can switch on the HSI to receive a frame, and switch off the HSI after + * receiving the frame if it is not a wakeup frame. In this case the HSI clock is propagated only + * to the peripheral requesting it. + * SRAM1, SRAM2 and register contents are preserved. + * SRAM3 content is preserved depending on RRSTP bit setting (not available on all devices). + * The BOR is available. + * The voltage regulator is set in low-power mode but LPR bit must be cleared to enter stop 2 mode. + * Otherwise, Stop 1 mode is entered. + * @note When exiting Stop 2 mode by issuing an interrupt or a wakeup event, + * the HSI RC oscillator is selected as system clock if STOPWUCK bit in RCC_CFGR register + * is set; the MSI oscillator is selected if STOPWUCK is cleared. + * @param STOPEntry specifies if Stop mode in entered with WFI or WFE instruction. + * This parameter can be one of the following values: + * @arg @ref PWR_STOPENTRY_WFI Enter Stop mode with WFI instruction + * @arg @ref PWR_STOPENTRY_WFE Enter Stop mode with WFE instruction + * @retval None + */ +void HAL_PWREx_EnterSTOP2Mode(uint8_t STOPEntry) +{ + /* Check the parameter */ + assert_param(IS_PWR_STOP_ENTRY(STOPEntry)); + + /* Set Stop mode 2 */ + MODIFY_REG(PWR->CR1, PWR_CR1_LPMS, PWR_CR1_LPMS_STOP2); + + /* Set SLEEPDEEP bit of Cortex System Control Register */ + SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk)); + + /* Select Stop mode entry --------------------------------------------------*/ + if(STOPEntry == PWR_STOPENTRY_WFI) + { + /* Request Wait For Interrupt */ + __WFI(); + } + else + { + /* Request Wait For Event */ + __SEV(); + __WFE(); + __WFE(); + } + + /* Reset SLEEPDEEP bit of Cortex System Control Register */ + CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk)); +} + + + + + +/** + * @brief Enter Shutdown mode. + * @note In Shutdown mode, the PLL, the HSI, the MSI, the LSI and the HSE oscillators are switched + * off. The voltage regulator is disabled and Vcore domain is powered off. + * SRAM1, SRAM2 and registers contents are lost except for registers in the Backup domain. + * The BOR is not available. + * @note The I/Os can be configured either with a pull-up or pull-down or can be kept in analog state. + * @retval None + */ +void HAL_PWREx_EnterSHUTDOWNMode(void) +{ + + /* Set Shutdown mode */ + MODIFY_REG(PWR->CR1, PWR_CR1_LPMS, PWR_CR1_LPMS_SHUTDOWN); + + /* Set SLEEPDEEP bit of Cortex System Control Register */ + SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk)); + +/* This option is used to ensure that store operations are completed */ +#if defined ( __CC_ARM) + __force_stores(); +#endif + /* Request Wait For Interrupt */ + __WFI(); +} + + + + +/** + * @brief This function handles the PWR PVD/PVMx interrupt request. + * @note This API should be called under the PVD_PVM_IRQHandler(). + * @retval None + */ +void HAL_PWREx_PVD_PVM_IRQHandler(void) +{ + /* Check PWR exti flag */ + if(__HAL_PWR_PVD_EXTI_GET_FLAG() != 0x0U) + { + /* PWR PVD interrupt user callback */ + HAL_PWR_PVDCallback(); + + /* Clear PVD exti pending bit */ + __HAL_PWR_PVD_EXTI_CLEAR_FLAG(); + } + /* Next, successively check PVMx exti flags */ +#if defined(PWR_CR2_PVME1) + if(__HAL_PWR_PVM1_EXTI_GET_FLAG() != 0x0U) + { + /* PWR PVM1 interrupt user callback */ + HAL_PWREx_PVM1Callback(); + + /* Clear PVM1 exti pending bit */ + __HAL_PWR_PVM1_EXTI_CLEAR_FLAG(); + } +#endif /* PWR_CR2_PVME1 */ +#if defined(PWR_CR2_PVME2) + if(__HAL_PWR_PVM2_EXTI_GET_FLAG() != 0x0U) + { + /* PWR PVM2 interrupt user callback */ + HAL_PWREx_PVM2Callback(); + + /* Clear PVM2 exti pending bit */ + __HAL_PWR_PVM2_EXTI_CLEAR_FLAG(); + } +#endif /* PWR_CR2_PVME2 */ + if(__HAL_PWR_PVM3_EXTI_GET_FLAG() != 0x0U) + { + /* PWR PVM3 interrupt user callback */ + HAL_PWREx_PVM3Callback(); + + /* Clear PVM3 exti pending bit */ + __HAL_PWR_PVM3_EXTI_CLEAR_FLAG(); + } + if(__HAL_PWR_PVM4_EXTI_GET_FLAG() != 0x0U) + { + /* PWR PVM4 interrupt user callback */ + HAL_PWREx_PVM4Callback(); + + /* Clear PVM4 exti pending bit */ + __HAL_PWR_PVM4_EXTI_CLEAR_FLAG(); + } +} + + +#if defined(PWR_CR2_PVME1) +/** + * @brief PWR PVM1 interrupt callback + * @retval None + */ +__weak void HAL_PWREx_PVM1Callback(void) +{ + /* NOTE : This function should not be modified; when the callback is needed, + HAL_PWREx_PVM1Callback() API can be implemented in the user file + */ +} +#endif /* PWR_CR2_PVME1 */ + +#if defined(PWR_CR2_PVME2) +/** + * @brief PWR PVM2 interrupt callback + * @retval None + */ +__weak void HAL_PWREx_PVM2Callback(void) +{ + /* NOTE : This function should not be modified; when the callback is needed, + HAL_PWREx_PVM2Callback() API can be implemented in the user file + */ +} +#endif /* PWR_CR2_PVME2 */ + +/** + * @brief PWR PVM3 interrupt callback + * @retval None + */ +__weak void HAL_PWREx_PVM3Callback(void) +{ + /* NOTE : This function should not be modified; when the callback is needed, + HAL_PWREx_PVM3Callback() API can be implemented in the user file + */ +} + +/** + * @brief PWR PVM4 interrupt callback + * @retval None + */ +__weak void HAL_PWREx_PVM4Callback(void) +{ + /* NOTE : This function should not be modified; when the callback is needed, + HAL_PWREx_PVM4Callback() API can be implemented in the user file + */ +} + + +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_PWR_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ diff --git a/CablePositioning_IAP_V1.0/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc.c b/CablePositioning_IAP_V1.0/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc.c index 75d51f7..a4fe06f 100644 --- a/CablePositioning_IAP_V1.0/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc.c +++ b/CablePositioning_IAP_V1.0/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc.c @@ -1,1936 +1,1942 @@ -/** - ****************************************************************************** - * @file stm32l4xx_hal_rcc.c - * @author MCD Application Team - * @brief RCC HAL module driver. - * This file provides firmware functions to manage the following - * functionalities of the Reset and Clock Control (RCC) peripheral: - * + Initialization and de-initialization functions - * + Peripheral Control functions - * - @verbatim - ============================================================================== - ##### RCC specific features ##### - ============================================================================== - [..] - After reset the device is running from Multiple Speed Internal oscillator - (4 MHz) with Flash 0 wait state. Flash prefetch buffer, D-Cache - and I-Cache are disabled, and all peripherals are off except internal - SRAM, Flash and JTAG. - - (+) There is no prescaler on High speed (AHBs) and Low speed (APBs) busses: - all peripherals mapped on these busses are running at MSI speed. - (+) The clock for all peripherals is switched off, except the SRAM and FLASH. - (+) All GPIOs are in analog mode, except the JTAG pins which - are assigned to be used for debug purpose. - - [..] - Once the device started from reset, the user application has to: - (+) Configure the clock source to be used to drive the System clock - (if the application needs higher frequency/performance) - (+) Configure the System clock frequency and Flash settings - (+) Configure the AHB and APB busses prescalers - (+) Enable the clock for the peripheral(s) to be used - (+) Configure the clock source(s) for peripherals which clocks are not - derived from the System clock (SAIx, RTC, ADC, USB OTG FS/SDMMC1/RNG) - - @endverbatim - ****************************************************************************** - * @attention - * - * Copyright (c) 2017 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file in - * the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32l4xx_hal.h" - -/** @addtogroup STM32L4xx_HAL_Driver - * @{ - */ - -/** @defgroup RCC RCC - * @brief RCC HAL module driver - * @{ - */ - -#ifdef HAL_RCC_MODULE_ENABLED - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -/** @defgroup RCC_Private_Constants RCC Private Constants - * @{ - */ -#define HSE_TIMEOUT_VALUE HSE_STARTUP_TIMEOUT -#define HSI_TIMEOUT_VALUE 2U /* 2 ms (minimum Tick + 1) */ -#define MSI_TIMEOUT_VALUE 2U /* 2 ms (minimum Tick + 1) */ -#if defined(RCC_CSR_LSIPREDIV) -#define LSI_TIMEOUT_VALUE 17U /* 17 ms (16 ms starting time + 1) */ -#else -#define LSI_TIMEOUT_VALUE 2U /* 2 ms (minimum Tick + 1) */ -#endif /* RCC_CSR_LSIPREDIV */ -#define HSI48_TIMEOUT_VALUE 2U /* 2 ms (minimum Tick + 1) */ -#define PLL_TIMEOUT_VALUE 2U /* 2 ms (minimum Tick + 1) */ -#define CLOCKSWITCH_TIMEOUT_VALUE 5000U /* 5 s */ -/** - * @} - */ - -/* Private macro -------------------------------------------------------------*/ -/** @defgroup RCC_Private_Macros RCC Private Macros - * @{ - */ -#define __MCO1_CLK_ENABLE() __HAL_RCC_GPIOA_CLK_ENABLE() -#define MCO1_GPIO_PORT GPIOA -#define MCO1_PIN GPIO_PIN_8 - -#define RCC_PLL_OSCSOURCE_CONFIG(__HAL_RCC_PLLSOURCE__) \ - (MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC, (__HAL_RCC_PLLSOURCE__))) -/** - * @} - */ - -/* Private variables ---------------------------------------------------------*/ - -/* Private function prototypes -----------------------------------------------*/ -/** @defgroup RCC_Private_Functions RCC Private Functions - * @{ - */ -static HAL_StatusTypeDef RCC_SetFlashLatencyFromMSIRange(uint32_t msirange); -#if defined(STM32L4P5xx) || defined(STM32L4Q5xx) || \ - defined(STM32L4R5xx) || defined(STM32L4R7xx) || defined(STM32L4R9xx) || defined(STM32L4S5xx) || defined(STM32L4S7xx) || defined(STM32L4S9xx) -static uint32_t RCC_GetSysClockFreqFromPLLSource(void); -#endif -/** - * @} - */ - -/* Exported functions --------------------------------------------------------*/ - -/** @defgroup RCC_Exported_Functions RCC Exported Functions - * @{ - */ - -/** @defgroup RCC_Exported_Functions_Group1 Initialization and de-initialization functions - * @brief Initialization and Configuration functions - * - @verbatim - =============================================================================== - ##### Initialization and de-initialization functions ##### - =============================================================================== - [..] - This section provides functions allowing to configure the internal and external oscillators - (HSE, HSI, LSE, MSI, LSI, PLL, CSS and MCO) and the System busses clocks (SYSCLK, AHB, APB1 - and APB2). - - [..] Internal/external clock and PLL configuration - (+) HSI (high-speed internal): 16 MHz factory-trimmed RC used directly or through - the PLL as System clock source. - - (+) MSI (Multiple Speed Internal): Its frequency is software trimmable from 100KHZ to 48MHZ. - It can be used to generate the clock for the USB OTG FS (48 MHz). - The number of flash wait states is automatically adjusted when MSI range is updated with - HAL_RCC_OscConfig() and the MSI is used as System clock source. - - (+) LSI (low-speed internal): 32 KHz low consumption RC used as IWDG and/or RTC - clock source. - - (+) HSE (high-speed external): 4 to 48 MHz crystal oscillator used directly or - through the PLL as System clock source. Can be used also optionally as RTC clock source. - - (+) LSE (low-speed external): 32.768 KHz oscillator used optionally as RTC clock source. - - (+) PLL (clocked by HSI, HSE or MSI) providing up to three independent output clocks: - (++) The first output is used to generate the high speed system clock (up to 80MHz). - (++) The second output is used to generate the clock for the USB OTG FS (48 MHz), - the random analog generator (<=48 MHz) and the SDMMC1 (<= 48 MHz). - (++) The third output is used to generate an accurate clock to achieve - high-quality audio performance on SAI interface. - - (+) PLLSAI1 (clocked by HSI, HSE or MSI) providing up to three independent output clocks: - (++) The first output is used to generate SAR ADC1 clock. - (++) The second output is used to generate the clock for the USB OTG FS (48 MHz), - the random analog generator (<=48 MHz) and the SDMMC1 (<= 48 MHz). - (++) The third output is used to generate an accurate clock to achieve - high-quality audio performance on SAI interface. - - (+) PLLSAI2 (clocked by HSI, HSE or MSI) providing up to three independent output clocks: - (++) The first output is used to generate an accurate clock to achieve - high-quality audio performance on SAI interface. - (++) The second output is used to generate either SAR ADC2 clock if ADC2 is present - or LCD clock if LTDC is present. - (++) The third output is used to generate DSI clock if DSI is present. - - (+) CSS (Clock security system): once enabled, if a HSE clock failure occurs - (HSE used directly or through PLL as System clock source), the System clock - is automatically switched to HSI and an interrupt is generated if enabled. - The interrupt is linked to the Cortex-M4 NMI (Non-Maskable Interrupt) - exception vector. - - (+) MCO (microcontroller clock output): used to output MSI, LSI, HSI, LSE, HSE or - main PLL clock (through a configurable prescaler) on PA8 pin. - - [..] System, AHB and APB busses clocks configuration - (+) Several clock sources can be used to drive the System clock (SYSCLK): MSI, HSI, - HSE and main PLL. - The AHB clock (HCLK) is derived from System clock through configurable - prescaler and used to clock the CPU, memory and peripherals mapped - on AHB bus (DMA, GPIO...). APB1 (PCLK1) and APB2 (PCLK2) clocks are derived - from AHB clock through configurable prescalers and used to clock - the peripherals mapped on these busses. You can use - "HAL_RCC_GetSysClockFreq()" function to retrieve the frequencies of these clocks. - - -@- All the peripheral clocks are derived from the System clock (SYSCLK) except: - - (+@) SAI: the SAI clock can be derived either from a specific PLL (PLLSAI1) or (PLLSAI2) or - from an external clock mapped on the SAI_CKIN pin. - You have to use HAL_RCCEx_PeriphCLKConfig() function to configure this clock. - (+@) RTC: the RTC clock can be derived either from the LSI, LSE or HSE clock - divided by 2 to 31. - You have to use __HAL_RCC_RTC_ENABLE() and HAL_RCCEx_PeriphCLKConfig() function - to configure this clock. - (+@) USB OTG FS, SDMMC1 and RNG: USB OTG FS requires a frequency equal to 48 MHz - to work correctly, while the SDMMC1 and RNG peripherals require a frequency - equal or lower than to 48 MHz. This clock is derived of the main PLL or PLLSAI1 - through PLLQ divider. You have to enable the peripheral clock and use - HAL_RCCEx_PeriphCLKConfig() function to configure this clock. - (+@) IWDG clock which is always the LSI clock. - - - (+) The maximum frequency of the SYSCLK, HCLK, PCLK1 and PCLK2 is 80 MHz. - The clock source frequency should be adapted depending on the device voltage range - as listed in the Reference Manual "Clock source frequency versus voltage scaling" chapter. - - @endverbatim - - Table 1. HCLK clock frequency for other STM32L4 devices - +-------------------------------------------------------+ - | Latency | HCLK clock frequency (MHz) | - | |-------------------------------------| - | | voltage range 1 | voltage range 2 | - | | 1.2 V | 1.0 V | - |-----------------|------------------|------------------| - |0WS(1 CPU cycles)| 0 < HCLK <= 16 | 0 < HCLK <= 6 | - |-----------------|------------------|------------------| - |1WS(2 CPU cycles)| 16 < HCLK <= 32 | 6 < HCLK <= 12 | - |-----------------|------------------|------------------| - |2WS(3 CPU cycles)| 32 < HCLK <= 48 | 12 < HCLK <= 18 | - |-----------------|------------------|------------------| - |3WS(4 CPU cycles)| 48 < HCLK <= 64 | 18 < HCLK <= 26 | - |-----------------|------------------|------------------| - |4WS(5 CPU cycles)| 64 < HCLK <= 80 | 18 < HCLK <= 26 | - +-------------------------------------------------------+ - - Table 2. HCLK clock frequency for STM32L4+ devices - +--------------------------------------------------------+ - | Latency | HCLK clock frequency (MHz) | - | |--------------------------------------| - | | voltage range 1 | voltage range 2 | - | | 1.2 V | 1.0 V | - |-----------------|-------------------|------------------| - |0WS(1 CPU cycles)| 0 < HCLK <= 20 | 0 < HCLK <= 8 | - |-----------------|-------------------|------------------| - |1WS(2 CPU cycles)| 20 < HCLK <= 40 | 8 < HCLK <= 16 | - |-----------------|-------------------|------------------| - |2WS(3 CPU cycles)| 40 < HCLK <= 60 | 16 < HCLK <= 26 | - |-----------------|-------------------|------------------| - |3WS(4 CPU cycles)| 60 < HCLK <= 80 | 16 < HCLK <= 26 | - |-----------------|-------------------|------------------| - |4WS(5 CPU cycles)| 80 < HCLK <= 100 | 16 < HCLK <= 26 | - |-----------------|-------------------|------------------| - |5WS(6 CPU cycles)| 100 < HCLK <= 120 | 16 < HCLK <= 26 | - +--------------------------------------------------------+ - * @{ - */ - -/** - * @brief Reset the RCC clock configuration to the default reset state. - * @note The default reset state of the clock configuration is given below: - * - MSI ON and used as system clock source - * - HSE, HSI, PLL, PLLSAI1 and PLLSAI2 OFF - * - AHB, APB1 and APB2 prescalers set to 1. - * - CSS, MCO1 OFF - * - All interrupts disabled - * - All interrupt and reset flags cleared - * @note This function does not modify the configuration of the - * - Peripheral clock sources - * - LSI, LSE and RTC clocks (Backup domain) - * @retval HAL status - */ -HAL_StatusTypeDef HAL_RCC_DeInit(void) -{ - uint32_t tickstart; - - /* Reset to default System clock */ - /* Set MSION bit */ - SET_BIT(RCC->CR, RCC_CR_MSION); - - /* Insure MSIRDY bit is set before writing default MSIRANGE value */ - /* Get start tick */ - tickstart = HAL_GetTick(); - - /* Wait till MSI is ready */ - while(READ_BIT(RCC->CR, RCC_CR_MSIRDY) == 0U) - { - if((HAL_GetTick() - tickstart) > MSI_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - - /* Set MSIRANGE default value */ - MODIFY_REG(RCC->CR, RCC_CR_MSIRANGE, RCC_MSIRANGE_6); - - /* Reset CFGR register (MSI is selected as system clock source) */ - CLEAR_REG(RCC->CFGR); - - /* Update the SystemCoreClock global variable for MSI as system clock source */ - SystemCoreClock = MSI_VALUE; - - /* Configure the source of time base considering new system clock settings */ - if(HAL_InitTick(uwTickPrio) != HAL_OK) - { - return HAL_ERROR; - } - - /* Insure MSI selected as system clock source */ - /* Get start tick */ - tickstart = HAL_GetTick(); - - /* Wait till system clock source is ready */ - while(READ_BIT(RCC->CFGR, RCC_CFGR_SWS) != RCC_CFGR_SWS_MSI) - { - if((HAL_GetTick() - tickstart) > CLOCKSWITCH_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - - /* Reset HSION, HSIKERON, HSIASFS, HSEON, HSECSSON, PLLON, PLLSAIxON bits */ -#if defined(RCC_PLLSAI2_SUPPORT) - - CLEAR_BIT(RCC->CR, RCC_CR_HSEON | RCC_CR_HSION | RCC_CR_HSIKERON| RCC_CR_HSIASFS | RCC_CR_PLLON | RCC_CR_PLLSAI1ON | RCC_CR_PLLSAI2ON); - -#elif defined(RCC_PLLSAI1_SUPPORT) - - CLEAR_BIT(RCC->CR, RCC_CR_HSEON | RCC_CR_HSION | RCC_CR_HSIKERON| RCC_CR_HSIASFS | RCC_CR_PLLON | RCC_CR_PLLSAI1ON); - -#else - - CLEAR_BIT(RCC->CR, RCC_CR_HSEON | RCC_CR_HSION | RCC_CR_HSIKERON| RCC_CR_HSIASFS | RCC_CR_PLLON); - -#endif /* RCC_PLLSAI2_SUPPORT */ - - /* Insure PLLRDY, PLLSAI1RDY and PLLSAI2RDY (if present) are reset */ - /* Get start tick */ - tickstart = HAL_GetTick(); - -#if defined(RCC_PLLSAI2_SUPPORT) - - while(READ_BIT(RCC->CR, RCC_CR_PLLRDY | RCC_CR_PLLSAI1RDY | RCC_CR_PLLSAI2RDY) != 0U) - -#elif defined(RCC_PLLSAI1_SUPPORT) - - while(READ_BIT(RCC->CR, RCC_CR_PLLRDY | RCC_CR_PLLSAI1RDY) != 0U) - -#else - - while(READ_BIT(RCC->CR, RCC_CR_PLLRDY) != 0U) - -#endif - { - if((HAL_GetTick() - tickstart) > PLL_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - - /* Reset PLLCFGR register */ - CLEAR_REG(RCC->PLLCFGR); - SET_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLN_4 ); - -#if defined(RCC_PLLSAI1_SUPPORT) - - /* Reset PLLSAI1CFGR register */ - CLEAR_REG(RCC->PLLSAI1CFGR); - SET_BIT(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1N_4 ); - -#endif /* RCC_PLLSAI1_SUPPORT */ - -#if defined(RCC_PLLSAI2_SUPPORT) - - /* Reset PLLSAI2CFGR register */ - CLEAR_REG(RCC->PLLSAI2CFGR); - SET_BIT(RCC->PLLSAI2CFGR, RCC_PLLSAI2CFGR_PLLSAI2N_4 ); - -#endif /* RCC_PLLSAI2_SUPPORT */ - - /* Reset HSEBYP bit */ - CLEAR_BIT(RCC->CR, RCC_CR_HSEBYP); - - /* Disable all interrupts */ - CLEAR_REG(RCC->CIER); - - /* Clear all interrupt flags */ - WRITE_REG(RCC->CICR, 0xFFFFFFFFU); - - /* Clear all reset flags */ - SET_BIT(RCC->CSR, RCC_CSR_RMVF); - - return HAL_OK; -} - -/** - * @brief Initialize the RCC Oscillators according to the specified parameters in the - * RCC_OscInitTypeDef. - * @param RCC_OscInitStruct pointer to an RCC_OscInitTypeDef structure that - * contains the configuration information for the RCC Oscillators. - * @note The PLL is not disabled when used as system clock. - * @note The PLL source is not updated when used as PLLSAI(s) clock source. - * @note Transitions LSE Bypass to LSE On and LSE On to LSE Bypass are not - * supported by this macro. User should request a transition to LSE Off - * first and then LSE On or LSE Bypass. - * @note Transition HSE Bypass to HSE On and HSE On to HSE Bypass are not - * supported by this macro. User should request a transition to HSE Off - * first and then HSE On or HSE Bypass. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_RCC_OscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct) -{ - uint32_t tickstart; - HAL_StatusTypeDef status; - uint32_t sysclk_source, pll_config; - - /* Check Null pointer */ - if(RCC_OscInitStruct == NULL) - { - return HAL_ERROR; - } - - /* Check the parameters */ - assert_param(IS_RCC_OSCILLATORTYPE(RCC_OscInitStruct->OscillatorType)); - - sysclk_source = __HAL_RCC_GET_SYSCLK_SOURCE(); - pll_config = __HAL_RCC_GET_PLL_OSCSOURCE(); - - /*----------------------------- MSI Configuration --------------------------*/ - if(((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_MSI) == RCC_OSCILLATORTYPE_MSI) - { - /* Check the parameters */ - assert_param(IS_RCC_MSI(RCC_OscInitStruct->MSIState)); - assert_param(IS_RCC_MSICALIBRATION_VALUE(RCC_OscInitStruct->MSICalibrationValue)); - assert_param(IS_RCC_MSI_CLOCK_RANGE(RCC_OscInitStruct->MSIClockRange)); - - /* Check if MSI is used as system clock or as PLL source when PLL is selected as system clock */ - if((sysclk_source == RCC_CFGR_SWS_MSI) || - ((sysclk_source == RCC_CFGR_SWS_PLL) && (pll_config == RCC_PLLSOURCE_MSI))) - { - if((READ_BIT(RCC->CR, RCC_CR_MSIRDY) != 0U) && (RCC_OscInitStruct->MSIState == RCC_MSI_OFF)) - { - return HAL_ERROR; - } - - /* Otherwise, just the calibration and MSI range change are allowed */ - else - { - /* To correctly read data from FLASH memory, the number of wait states (LATENCY) - must be correctly programmed according to the frequency of the CPU clock - (HCLK) and the supply voltage of the device. */ - if(RCC_OscInitStruct->MSIClockRange > __HAL_RCC_GET_MSI_RANGE()) - { - /* First increase number of wait states update if necessary */ - if(RCC_SetFlashLatencyFromMSIRange(RCC_OscInitStruct->MSIClockRange) != HAL_OK) - { - return HAL_ERROR; - } - - /* Selects the Multiple Speed oscillator (MSI) clock range .*/ - __HAL_RCC_MSI_RANGE_CONFIG(RCC_OscInitStruct->MSIClockRange); - /* Adjusts the Multiple Speed oscillator (MSI) calibration value.*/ - __HAL_RCC_MSI_CALIBRATIONVALUE_ADJUST(RCC_OscInitStruct->MSICalibrationValue); - } - else - { - /* Else, keep current flash latency while decreasing applies */ - /* Selects the Multiple Speed oscillator (MSI) clock range .*/ - __HAL_RCC_MSI_RANGE_CONFIG(RCC_OscInitStruct->MSIClockRange); - /* Adjusts the Multiple Speed oscillator (MSI) calibration value.*/ - __HAL_RCC_MSI_CALIBRATIONVALUE_ADJUST(RCC_OscInitStruct->MSICalibrationValue); - - /* Decrease number of wait states update if necessary */ - /* Only possible when MSI is the System clock source */ - if(sysclk_source == RCC_CFGR_SWS_MSI) - { - if(RCC_SetFlashLatencyFromMSIRange(RCC_OscInitStruct->MSIClockRange) != HAL_OK) - { - return HAL_ERROR; - } - } - } - - /* Update the SystemCoreClock global variable */ - SystemCoreClock = HAL_RCC_GetSysClockFreq() >> (AHBPrescTable[READ_BIT(RCC->CFGR, RCC_CFGR_HPRE) >> RCC_CFGR_HPRE_Pos] & 0x1FU); - - /* Configure the source of time base considering new system clocks settings*/ - status = HAL_InitTick(uwTickPrio); - if(status != HAL_OK) - { - return status; - } - } - } - else - { - /* Check the MSI State */ - if(RCC_OscInitStruct->MSIState != RCC_MSI_OFF) - { - /* Enable the Internal High Speed oscillator (MSI). */ - __HAL_RCC_MSI_ENABLE(); - - /* Get timeout */ - tickstart = HAL_GetTick(); - - /* Wait till MSI is ready */ - while(READ_BIT(RCC->CR, RCC_CR_MSIRDY) == 0U) - { - if((HAL_GetTick() - tickstart) > MSI_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - /* Selects the Multiple Speed oscillator (MSI) clock range .*/ - __HAL_RCC_MSI_RANGE_CONFIG(RCC_OscInitStruct->MSIClockRange); - /* Adjusts the Multiple Speed oscillator (MSI) calibration value.*/ - __HAL_RCC_MSI_CALIBRATIONVALUE_ADJUST(RCC_OscInitStruct->MSICalibrationValue); - - } - else - { - /* Disable the Internal High Speed oscillator (MSI). */ - __HAL_RCC_MSI_DISABLE(); - - /* Get timeout */ - tickstart = HAL_GetTick(); - - /* Wait till MSI is ready */ - while(READ_BIT(RCC->CR, RCC_CR_MSIRDY) != 0U) - { - if((HAL_GetTick() - tickstart) > MSI_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - } - } - } - /*------------------------------- HSE Configuration ------------------------*/ - if(((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_HSE) == RCC_OSCILLATORTYPE_HSE) - { - /* Check the parameters */ - assert_param(IS_RCC_HSE(RCC_OscInitStruct->HSEState)); - - /* When the HSE is used as system clock or clock source for PLL in these cases it is not allowed to be disabled */ - if((sysclk_source == RCC_CFGR_SWS_HSE) || - ((sysclk_source == RCC_CFGR_SWS_PLL) && (pll_config == RCC_PLLSOURCE_HSE))) - { - if((READ_BIT(RCC->CR, RCC_CR_HSERDY) != 0U) && (RCC_OscInitStruct->HSEState == RCC_HSE_OFF)) - { - return HAL_ERROR; - } - } - else - { - /* Set the new HSE configuration ---------------------------------------*/ - __HAL_RCC_HSE_CONFIG(RCC_OscInitStruct->HSEState); - - /* Check the HSE State */ - if(RCC_OscInitStruct->HSEState != RCC_HSE_OFF) - { - /* Get Start Tick*/ - tickstart = HAL_GetTick(); - - /* Wait till HSE is ready */ - while(READ_BIT(RCC->CR, RCC_CR_HSERDY) == 0U) - { - if((HAL_GetTick() - tickstart) > HSE_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - } - else - { - /* Get Start Tick*/ - tickstart = HAL_GetTick(); - - /* Wait till HSE is disabled */ - while(READ_BIT(RCC->CR, RCC_CR_HSERDY) != 0U) - { - if((HAL_GetTick() - tickstart) > HSE_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - } - } - } - /*----------------------------- HSI Configuration --------------------------*/ - if(((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_HSI) == RCC_OSCILLATORTYPE_HSI) - { - /* Check the parameters */ - assert_param(IS_RCC_HSI(RCC_OscInitStruct->HSIState)); - assert_param(IS_RCC_HSI_CALIBRATION_VALUE(RCC_OscInitStruct->HSICalibrationValue)); - - /* Check if HSI is used as system clock or as PLL source when PLL is selected as system clock */ - if((sysclk_source == RCC_CFGR_SWS_HSI) || - ((sysclk_source == RCC_CFGR_SWS_PLL) && (pll_config == RCC_PLLSOURCE_HSI))) - { - /* When HSI is used as system clock it will not be disabled */ - if((READ_BIT(RCC->CR, RCC_CR_HSIRDY) != 0U) && (RCC_OscInitStruct->HSIState == RCC_HSI_OFF)) - { - return HAL_ERROR; - } - /* Otherwise, just the calibration is allowed */ - else - { - /* Adjusts the Internal High Speed oscillator (HSI) calibration value.*/ - __HAL_RCC_HSI_CALIBRATIONVALUE_ADJUST(RCC_OscInitStruct->HSICalibrationValue); - } - } - else - { - /* Check the HSI State */ - if(RCC_OscInitStruct->HSIState != RCC_HSI_OFF) - { - /* Enable the Internal High Speed oscillator (HSI). */ - __HAL_RCC_HSI_ENABLE(); - - /* Get Start Tick*/ - tickstart = HAL_GetTick(); - - /* Wait till HSI is ready */ - while(READ_BIT(RCC->CR, RCC_CR_HSIRDY) == 0U) - { - if((HAL_GetTick() - tickstart) > HSI_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - - /* Adjusts the Internal High Speed oscillator (HSI) calibration value.*/ - __HAL_RCC_HSI_CALIBRATIONVALUE_ADJUST(RCC_OscInitStruct->HSICalibrationValue); - } - else - { - /* Disable the Internal High Speed oscillator (HSI). */ - __HAL_RCC_HSI_DISABLE(); - - /* Get Start Tick*/ - tickstart = HAL_GetTick(); - - /* Wait till HSI is disabled */ - while(READ_BIT(RCC->CR, RCC_CR_HSIRDY) != 0U) - { - if((HAL_GetTick() - tickstart) > HSI_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - } - } - } - /*------------------------------ LSI Configuration -------------------------*/ - if(((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_LSI) == RCC_OSCILLATORTYPE_LSI) - { - /* Check the parameters */ - assert_param(IS_RCC_LSI(RCC_OscInitStruct->LSIState)); - - /* Check the LSI State */ - if(RCC_OscInitStruct->LSIState != RCC_LSI_OFF) - { -#if defined(RCC_CSR_LSIPREDIV) - uint32_t csr_temp = RCC->CSR; - - /* Check LSI division factor */ - assert_param(IS_RCC_LSIDIV(RCC_OscInitStruct->LSIDiv)); - - if (RCC_OscInitStruct->LSIDiv != (csr_temp & RCC_CSR_LSIPREDIV)) - { - if (((csr_temp & RCC_CSR_LSIRDY) == RCC_CSR_LSIRDY) && \ - ((csr_temp & RCC_CSR_LSION) != RCC_CSR_LSION)) - { - /* If LSIRDY is set while LSION is not enabled, - LSIPREDIV can't be updated */ - return HAL_ERROR; - } - - /* Turn off LSI before changing RCC_CSR_LSIPREDIV */ - if ((csr_temp & RCC_CSR_LSION) == RCC_CSR_LSION) - { - __HAL_RCC_LSI_DISABLE(); - - /* Get Start Tick*/ - tickstart = HAL_GetTick(); - - /* Wait till LSI is disabled */ - while(READ_BIT(RCC->CSR, RCC_CSR_LSIRDY) != 0U) - { - if((HAL_GetTick() - tickstart) > LSI_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - } - - /* Set LSI division factor */ - MODIFY_REG(RCC->CSR, RCC_CSR_LSIPREDIV, RCC_OscInitStruct->LSIDiv); - } -#endif /* RCC_CSR_LSIPREDIV */ - - /* Enable the Internal Low Speed oscillator (LSI). */ - __HAL_RCC_LSI_ENABLE(); - - /* Get Start Tick*/ - tickstart = HAL_GetTick(); - - /* Wait till LSI is ready */ - while(READ_BIT(RCC->CSR, RCC_CSR_LSIRDY) == 0U) - { - if((HAL_GetTick() - tickstart) > LSI_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - } - else - { - /* Disable the Internal Low Speed oscillator (LSI). */ - __HAL_RCC_LSI_DISABLE(); - - /* Get Start Tick*/ - tickstart = HAL_GetTick(); - - /* Wait till LSI is disabled */ - while(READ_BIT(RCC->CSR, RCC_CSR_LSIRDY) != 0U) - { - if((HAL_GetTick() - tickstart) > LSI_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - } - } - /*------------------------------ LSE Configuration -------------------------*/ - if(((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_LSE) == RCC_OSCILLATORTYPE_LSE) - { - FlagStatus pwrclkchanged = RESET; - - /* Check the parameters */ - assert_param(IS_RCC_LSE(RCC_OscInitStruct->LSEState)); - - /* Update LSE configuration in Backup Domain control register */ - /* Requires to enable write access to Backup Domain of necessary */ - if(HAL_IS_BIT_CLR(RCC->APB1ENR1, RCC_APB1ENR1_PWREN)) - { - __HAL_RCC_PWR_CLK_ENABLE(); - pwrclkchanged = SET; - } - - if(HAL_IS_BIT_CLR(PWR->CR1, PWR_CR1_DBP)) - { - /* Enable write access to Backup domain */ - SET_BIT(PWR->CR1, PWR_CR1_DBP); - - /* Wait for Backup domain Write protection disable */ - tickstart = HAL_GetTick(); - - while(HAL_IS_BIT_CLR(PWR->CR1, PWR_CR1_DBP)) - { - if((HAL_GetTick() - tickstart) > RCC_DBP_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - } - - /* Set the new LSE configuration -----------------------------------------*/ -#if defined(RCC_BDCR_LSESYSDIS) - if((RCC_OscInitStruct->LSEState & RCC_BDCR_LSEON) != 0U) - { - /* Set LSESYSDIS bit according to LSE propagation option (enabled or disabled) */ - MODIFY_REG(RCC->BDCR, RCC_BDCR_LSESYSDIS, (RCC_OscInitStruct->LSEState & RCC_BDCR_LSESYSDIS)); - - if((RCC_OscInitStruct->LSEState & RCC_BDCR_LSEBYP) != 0U) - { - /* LSE oscillator bypass enable */ - SET_BIT(RCC->BDCR, RCC_BDCR_LSEBYP); - SET_BIT(RCC->BDCR, RCC_BDCR_LSEON); - } - else - { - /* LSE oscillator enable */ - SET_BIT(RCC->BDCR, RCC_BDCR_LSEON); - } - } - else - { - CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEON); - CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEBYP); - } -#else - __HAL_RCC_LSE_CONFIG(RCC_OscInitStruct->LSEState); -#endif /* RCC_BDCR_LSESYSDIS */ - - /* Check the LSE State */ - if(RCC_OscInitStruct->LSEState != RCC_LSE_OFF) - { - /* Get Start Tick*/ - tickstart = HAL_GetTick(); - - /* Wait till LSE is ready */ - while(READ_BIT(RCC->BDCR, RCC_BDCR_LSERDY) == 0U) - { - if((HAL_GetTick() - tickstart) > RCC_LSE_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - } - else - { - /* Get Start Tick*/ - tickstart = HAL_GetTick(); - - /* Wait till LSE is disabled */ - while(READ_BIT(RCC->BDCR, RCC_BDCR_LSERDY) != 0U) - { - if((HAL_GetTick() - tickstart) > RCC_LSE_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - -#if defined(RCC_BDCR_LSESYSDIS) - /* By default, stop disabling LSE propagation */ - CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSESYSDIS); -#endif /* RCC_BDCR_LSESYSDIS */ - } - - /* Restore clock configuration if changed */ - if(pwrclkchanged == SET) - { - __HAL_RCC_PWR_CLK_DISABLE(); - } - } -#if defined(RCC_HSI48_SUPPORT) - /*------------------------------ HSI48 Configuration -----------------------*/ - if(((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_HSI48) == RCC_OSCILLATORTYPE_HSI48) - { - /* Check the parameters */ - assert_param(IS_RCC_HSI48(RCC_OscInitStruct->HSI48State)); - - /* Check the LSI State */ - if(RCC_OscInitStruct->HSI48State != RCC_HSI48_OFF) - { - /* Enable the Internal Low Speed oscillator (HSI48). */ - __HAL_RCC_HSI48_ENABLE(); - - /* Get Start Tick*/ - tickstart = HAL_GetTick(); - - /* Wait till HSI48 is ready */ - while(READ_BIT(RCC->CRRCR, RCC_CRRCR_HSI48RDY) == 0U) - { - if((HAL_GetTick() - tickstart) > HSI48_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - } - else - { - /* Disable the Internal Low Speed oscillator (HSI48). */ - __HAL_RCC_HSI48_DISABLE(); - - /* Get Start Tick*/ - tickstart = HAL_GetTick(); - - /* Wait till HSI48 is disabled */ - while(READ_BIT(RCC->CRRCR, RCC_CRRCR_HSI48RDY) != 0U) - { - if((HAL_GetTick() - tickstart) > HSI48_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - } - } -#endif /* RCC_HSI48_SUPPORT */ - /*-------------------------------- PLL Configuration -----------------------*/ - /* Check the parameters */ - assert_param(IS_RCC_PLL(RCC_OscInitStruct->PLL.PLLState)); - - if(RCC_OscInitStruct->PLL.PLLState != RCC_PLL_NONE) - { - /* PLL On ? */ - if(RCC_OscInitStruct->PLL.PLLState == RCC_PLL_ON) - { - /* Check the parameters */ - assert_param(IS_RCC_PLLSOURCE(RCC_OscInitStruct->PLL.PLLSource)); - assert_param(IS_RCC_PLLM_VALUE(RCC_OscInitStruct->PLL.PLLM)); - assert_param(IS_RCC_PLLN_VALUE(RCC_OscInitStruct->PLL.PLLN)); -#if defined(RCC_PLLP_SUPPORT) - assert_param(IS_RCC_PLLP_VALUE(RCC_OscInitStruct->PLL.PLLP)); -#endif /* RCC_PLLP_SUPPORT */ - assert_param(IS_RCC_PLLQ_VALUE(RCC_OscInitStruct->PLL.PLLQ)); - assert_param(IS_RCC_PLLR_VALUE(RCC_OscInitStruct->PLL.PLLR)); - - /* Do nothing if PLL configuration is the unchanged */ - pll_config = RCC->PLLCFGR; - if((READ_BIT(pll_config, RCC_PLLCFGR_PLLSRC) != RCC_OscInitStruct->PLL.PLLSource) || - (READ_BIT(pll_config, RCC_PLLCFGR_PLLM) != ((RCC_OscInitStruct->PLL.PLLM - 1U) << RCC_PLLCFGR_PLLM_Pos)) || - (READ_BIT(pll_config, RCC_PLLCFGR_PLLN) != (RCC_OscInitStruct->PLL.PLLN << RCC_PLLCFGR_PLLN_Pos)) || -#if defined(RCC_PLLP_SUPPORT) -#if defined(RCC_PLLP_DIV_2_31_SUPPORT) - (READ_BIT(pll_config, RCC_PLLCFGR_PLLPDIV) != (RCC_OscInitStruct->PLL.PLLP << RCC_PLLCFGR_PLLPDIV_Pos)) || -#else - (READ_BIT(pll_config, RCC_PLLCFGR_PLLP) != ((RCC_OscInitStruct->PLL.PLLP == RCC_PLLP_DIV7) ? 0U : 1U)) || -#endif -#endif - (READ_BIT(pll_config, RCC_PLLCFGR_PLLQ) != ((((RCC_OscInitStruct->PLL.PLLQ) >> 1U) - 1U) << RCC_PLLCFGR_PLLQ_Pos)) || - (READ_BIT(pll_config, RCC_PLLCFGR_PLLR) != ((((RCC_OscInitStruct->PLL.PLLR) >> 1U) - 1U) << RCC_PLLCFGR_PLLR_Pos))) - { - /* Check if the PLL is used as system clock or not */ - if(sysclk_source != RCC_CFGR_SWS_PLL) - { -#if defined(RCC_PLLSAI1_SUPPORT) || defined(RCC_PLLSAI2_SUPPORT) - /* Check if main PLL can be updated */ - /* Not possible if the source is shared by other enabled PLLSAIx */ - if((READ_BIT(RCC->CR, RCC_CR_PLLSAI1ON) != 0U) -#if defined(RCC_PLLSAI2_SUPPORT) - || (READ_BIT(RCC->CR, RCC_CR_PLLSAI2ON) != 0U) -#endif - ) - { - return HAL_ERROR; - } - else -#endif /* RCC_PLLSAI1_SUPPORT || RCC_PLLSAI2_SUPPORT */ - { - /* Disable the main PLL. */ - __HAL_RCC_PLL_DISABLE(); - - /* Get Start Tick*/ - tickstart = HAL_GetTick(); - - /* Wait till PLL is ready */ - while(READ_BIT(RCC->CR, RCC_CR_PLLRDY) != 0U) - { - if((HAL_GetTick() - tickstart) > PLL_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - - /* Configure the main PLL clock source, multiplication and division factors. */ -#if defined(RCC_PLLP_SUPPORT) - __HAL_RCC_PLL_CONFIG(RCC_OscInitStruct->PLL.PLLSource, - RCC_OscInitStruct->PLL.PLLM, - RCC_OscInitStruct->PLL.PLLN, - RCC_OscInitStruct->PLL.PLLP, - RCC_OscInitStruct->PLL.PLLQ, - RCC_OscInitStruct->PLL.PLLR); -#else - __HAL_RCC_PLL_CONFIG(RCC_OscInitStruct->PLL.PLLSource, - RCC_OscInitStruct->PLL.PLLM, - RCC_OscInitStruct->PLL.PLLN, - RCC_OscInitStruct->PLL.PLLQ, - RCC_OscInitStruct->PLL.PLLR); -#endif - - /* Enable the main PLL. */ - __HAL_RCC_PLL_ENABLE(); - - /* Enable PLL System Clock output. */ - __HAL_RCC_PLLCLKOUT_ENABLE(RCC_PLL_SYSCLK); - - /* Get Start Tick*/ - tickstart = HAL_GetTick(); - - /* Wait till PLL is ready */ - while(READ_BIT(RCC->CR, RCC_CR_PLLRDY) == 0U) - { - if((HAL_GetTick() - tickstart) > PLL_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - } - } - else - { - /* PLL is already used as System core clock */ - return HAL_ERROR; - } - } - else - { - /* PLL configuration is unchanged */ - /* Re-enable PLL if it was disabled (ie. low power mode) */ - if(READ_BIT(RCC->CR, RCC_CR_PLLRDY) == 0U) - { - /* Enable the main PLL. */ - __HAL_RCC_PLL_ENABLE(); - - /* Enable PLL System Clock output. */ - __HAL_RCC_PLLCLKOUT_ENABLE(RCC_PLL_SYSCLK); - - /* Get Start Tick*/ - tickstart = HAL_GetTick(); - - /* Wait till PLL is ready */ - while(READ_BIT(RCC->CR, RCC_CR_PLLRDY) == 0U) - { - if((HAL_GetTick() - tickstart) > PLL_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - } - } - } - else - { - /* Check that PLL is not used as system clock or not */ - if(sysclk_source != RCC_CFGR_SWS_PLL) - { - /* Disable the main PLL. */ - __HAL_RCC_PLL_DISABLE(); - - /* Get Start Tick*/ - tickstart = HAL_GetTick(); - - /* Wait till PLL is disabled */ - while(READ_BIT(RCC->CR, RCC_CR_PLLRDY) != 0U) - { - if((HAL_GetTick() - tickstart) > PLL_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - /* Unselect main PLL clock source and disable main PLL outputs to save power */ -#if defined(RCC_PLLSAI2_SUPPORT) - RCC->PLLCFGR &= ~(RCC_PLLCFGR_PLLSRC | RCC_PLL_SYSCLK | RCC_PLL_48M1CLK | RCC_PLL_SAI3CLK); -#elif defined(RCC_PLLSAI1_SUPPORT) - RCC->PLLCFGR &= ~(RCC_PLLCFGR_PLLSRC | RCC_PLL_SYSCLK | RCC_PLL_48M1CLK | RCC_PLL_SAI2CLK); -#else - RCC->PLLCFGR &= ~(RCC_PLLCFGR_PLLSRC | RCC_PLL_SYSCLK | RCC_PLL_48M1CLK); -#endif /* RCC_PLLSAI2_SUPPORT */ - } - else - { - /* PLL is already used as System core clock */ - return HAL_ERROR; - } - } - } - return HAL_OK; -} - -/** - * @brief Initialize the CPU, AHB and APB busses clocks according to the specified - * parameters in the RCC_ClkInitStruct. - * @param RCC_ClkInitStruct pointer to an RCC_OscInitTypeDef structure that - * contains the configuration information for the RCC peripheral. - * @param FLatency FLASH Latency - * This parameter can be one of the following values: - * @arg FLASH_LATENCY_0 FLASH 0 Latency cycle - * @arg FLASH_LATENCY_1 FLASH 1 Latency cycle - * @arg FLASH_LATENCY_2 FLASH 2 Latency cycles - * @arg FLASH_LATENCY_3 FLASH 3 Latency cycles - * @arg FLASH_LATENCY_4 FLASH 4 Latency cycles - @if STM32L4S9xx - * @arg FLASH_LATENCY_5 FLASH 5 Latency cycles - * @arg FLASH_LATENCY_6 FLASH 6 Latency cycles - * @arg FLASH_LATENCY_7 FLASH 7 Latency cycles - * @arg FLASH_LATENCY_8 FLASH 8 Latency cycles - * @arg FLASH_LATENCY_9 FLASH 9 Latency cycles - * @arg FLASH_LATENCY_10 FLASH 10 Latency cycles - * @arg FLASH_LATENCY_11 FLASH 11 Latency cycles - * @arg FLASH_LATENCY_12 FLASH 12 Latency cycles - * @arg FLASH_LATENCY_13 FLASH 13 Latency cycles - * @arg FLASH_LATENCY_14 FLASH 14 Latency cycles - * @arg FLASH_LATENCY_15 FLASH 15 Latency cycles - @endif - * - * @note The SystemCoreClock CMSIS variable is used to store System Clock Frequency - * and updated by HAL_RCC_GetHCLKFreq() function called within this function - * - * @note The MSI is used by default as system clock source after - * startup from Reset, wake-up from STANDBY mode. After restart from Reset, - * the MSI frequency is set to its default value 4 MHz. - * - * @note The HSI can be selected as system clock source after - * from STOP modes or in case of failure of the HSE used directly or indirectly - * as system clock (if the Clock Security System CSS is enabled). - * - * @note A switch from one clock source to another occurs only if the target - * clock source is ready (clock stable after startup delay or PLL locked). - * If a clock source which is not yet ready is selected, the switch will - * occur when the clock source is ready. - * - * @note You can use HAL_RCC_GetClockConfig() function to know which clock is - * currently used as system clock source. - * - * @note Depending on the device voltage range, the software has to set correctly - * HPRE[3:0] bits to ensure that HCLK not exceed the maximum allowed frequency - * (for more details refer to section above "Initialization/de-initialization functions") - * @retval None - */ -HAL_StatusTypeDef HAL_RCC_ClockConfig(RCC_ClkInitTypeDef *RCC_ClkInitStruct, uint32_t FLatency) -{ - uint32_t tickstart; -#if defined(STM32L4P5xx) || defined(STM32L4Q5xx) || \ - defined(STM32L4R5xx) || defined(STM32L4R7xx) || defined(STM32L4R9xx) || defined(STM32L4S5xx) || defined(STM32L4S7xx) || defined(STM32L4S9xx) - uint32_t hpre = RCC_SYSCLK_DIV1; -#endif - HAL_StatusTypeDef status; - - /* Check Null pointer */ - if(RCC_ClkInitStruct == NULL) - { - return HAL_ERROR; - } - - /* Check the parameters */ - assert_param(IS_RCC_CLOCKTYPE(RCC_ClkInitStruct->ClockType)); - assert_param(IS_FLASH_LATENCY(FLatency)); - - /* To correctly read data from FLASH memory, the number of wait states (LATENCY) - must be correctly programmed according to the frequency of the CPU clock - (HCLK) and the supply voltage of the device. */ - - /* Increasing the number of wait states because of higher CPU frequency */ - if(FLatency > __HAL_FLASH_GET_LATENCY()) - { - /* Program the new number of wait states to the LATENCY bits in the FLASH_ACR register */ - __HAL_FLASH_SET_LATENCY(FLatency); - - /* Check that the new number of wait states is taken into account to access the Flash - memory by reading the FLASH_ACR register */ - if(__HAL_FLASH_GET_LATENCY() != FLatency) - { - return HAL_ERROR; - } - } - - /*----------------- HCLK Configuration prior to SYSCLK----------------------*/ - /* Apply higher HCLK prescaler request here to ensure CPU clock is not of of spec when SYSCLK is increased */ - if(((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_HCLK) == RCC_CLOCKTYPE_HCLK) - { - assert_param(IS_RCC_HCLK(RCC_ClkInitStruct->AHBCLKDivider)); - - if(RCC_ClkInitStruct->AHBCLKDivider > READ_BIT(RCC->CFGR, RCC_CFGR_HPRE)) - { - MODIFY_REG(RCC->CFGR, RCC_CFGR_HPRE, RCC_ClkInitStruct->AHBCLKDivider); - } - } - - /*------------------------- SYSCLK Configuration ---------------------------*/ - if(((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_SYSCLK) == RCC_CLOCKTYPE_SYSCLK) - { - assert_param(IS_RCC_SYSCLKSOURCE(RCC_ClkInitStruct->SYSCLKSource)); - - /* PLL is selected as System Clock Source */ - if(RCC_ClkInitStruct->SYSCLKSource == RCC_SYSCLKSOURCE_PLLCLK) - { - /* Check the PLL ready flag */ - if(READ_BIT(RCC->CR, RCC_CR_PLLRDY) == 0U) - { - return HAL_ERROR; - } -#if defined(STM32L4P5xx) || defined(STM32L4Q5xx) || \ - defined(STM32L4R5xx) || defined(STM32L4R7xx) || defined(STM32L4R9xx) || defined(STM32L4S5xx) || defined(STM32L4S7xx) || defined(STM32L4S9xx) - /* Undershoot management when selection PLL as SYSCLK source and frequency above 80Mhz */ - /* Compute target PLL output frequency */ - if(RCC_GetSysClockFreqFromPLLSource() > 80000000U) - { - /* If lowest HCLK prescaler, apply intermediate step with HCLK prescaler 2 necessary before to go over 80Mhz */ - if(READ_BIT(RCC->CFGR, RCC_CFGR_HPRE) == RCC_SYSCLK_DIV1) - { - MODIFY_REG(RCC->CFGR, RCC_CFGR_HPRE, RCC_SYSCLK_DIV2); - hpre = RCC_SYSCLK_DIV2; - } - } -#endif - } - else - { - /* HSE is selected as System Clock Source */ - if(RCC_ClkInitStruct->SYSCLKSource == RCC_SYSCLKSOURCE_HSE) - { - /* Check the HSE ready flag */ - if(READ_BIT(RCC->CR, RCC_CR_HSERDY) == 0U) - { - return HAL_ERROR; - } - } - /* MSI is selected as System Clock Source */ - else if(RCC_ClkInitStruct->SYSCLKSource == RCC_SYSCLKSOURCE_MSI) - { - /* Check the MSI ready flag */ - if(READ_BIT(RCC->CR, RCC_CR_MSIRDY) == 0U) - { - return HAL_ERROR; - } - } - /* HSI is selected as System Clock Source */ - else - { - /* Check the HSI ready flag */ - if(READ_BIT(RCC->CR, RCC_CR_HSIRDY) == 0U) - { - return HAL_ERROR; - } - } -#if defined(STM32L4P5xx) || defined(STM32L4Q5xx) || \ - defined(STM32L4R5xx) || defined(STM32L4R7xx) || defined(STM32L4R9xx) || defined(STM32L4S5xx) || defined(STM32L4S7xx) || defined(STM32L4S9xx) - /* Overshoot management when going down from PLL as SYSCLK source and frequency above 80Mhz */ - if(HAL_RCC_GetSysClockFreq() > 80000000U) - { - /* If lowest HCLK prescaler, apply intermediate step with HCLK prescaler 2 necessary before to go under 80Mhz */ - if(READ_BIT(RCC->CFGR, RCC_CFGR_HPRE) == RCC_SYSCLK_DIV1) - { - MODIFY_REG(RCC->CFGR, RCC_CFGR_HPRE, RCC_SYSCLK_DIV2); - hpre = RCC_SYSCLK_DIV2; - } - } -#endif - - } - - MODIFY_REG(RCC->CFGR, RCC_CFGR_SW, RCC_ClkInitStruct->SYSCLKSource); - - /* Get Start Tick*/ - tickstart = HAL_GetTick(); - - while(__HAL_RCC_GET_SYSCLK_SOURCE() != (RCC_ClkInitStruct->SYSCLKSource << RCC_CFGR_SWS_Pos)) - { - if((HAL_GetTick() - tickstart) > CLOCKSWITCH_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - } - -#if defined(STM32L4P5xx) || defined(STM32L4Q5xx) || \ - defined(STM32L4R5xx) || defined(STM32L4R7xx) || defined(STM32L4R9xx) || defined(STM32L4S5xx) || defined(STM32L4S7xx) || defined(STM32L4S9xx) - /* Is intermediate HCLK prescaler 2 applied internally, resume with HCLK prescaler 1 */ - if(hpre == RCC_SYSCLK_DIV2) - { - MODIFY_REG(RCC->CFGR, RCC_CFGR_HPRE, RCC_SYSCLK_DIV1); - } -#endif - - /*----------------- HCLK Configuration after SYSCLK-------------------------*/ - /* Apply lower HCLK prescaler request here to ensure CPU clock is not of of spec when SYSCLK is set */ - if(((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_HCLK) == RCC_CLOCKTYPE_HCLK) - { - if(RCC_ClkInitStruct->AHBCLKDivider < READ_BIT(RCC->CFGR, RCC_CFGR_HPRE)) - { - MODIFY_REG(RCC->CFGR, RCC_CFGR_HPRE, RCC_ClkInitStruct->AHBCLKDivider); - } - } - - /* Allow decreasing of the number of wait states (because of lower CPU frequency expected) */ - if(FLatency < __HAL_FLASH_GET_LATENCY()) - { - /* Program the new number of wait states to the LATENCY bits in the FLASH_ACR register */ - __HAL_FLASH_SET_LATENCY(FLatency); - - /* Check that the new number of wait states is taken into account to access the Flash - memory by reading the FLASH_ACR register */ - if(__HAL_FLASH_GET_LATENCY() != FLatency) - { - return HAL_ERROR; - } - } - - /*-------------------------- PCLK1 Configuration ---------------------------*/ - if(((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_PCLK1) == RCC_CLOCKTYPE_PCLK1) - { - assert_param(IS_RCC_PCLK(RCC_ClkInitStruct->APB1CLKDivider)); - MODIFY_REG(RCC->CFGR, RCC_CFGR_PPRE1, RCC_ClkInitStruct->APB1CLKDivider); - } - - /*-------------------------- PCLK2 Configuration ---------------------------*/ - if(((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_PCLK2) == RCC_CLOCKTYPE_PCLK2) - { - assert_param(IS_RCC_PCLK(RCC_ClkInitStruct->APB2CLKDivider)); - MODIFY_REG(RCC->CFGR, RCC_CFGR_PPRE2, ((RCC_ClkInitStruct->APB2CLKDivider) << 3U)); - } - - /* Update the SystemCoreClock global variable */ - SystemCoreClock = HAL_RCC_GetSysClockFreq() >> (AHBPrescTable[READ_BIT(RCC->CFGR, RCC_CFGR_HPRE) >> RCC_CFGR_HPRE_Pos] & 0x1FU); - - /* Configure the source of time base considering new system clocks settings*/ - status = HAL_InitTick(uwTickPrio); - - return status; -} - -/** - * @} - */ - -/** @defgroup RCC_Exported_Functions_Group2 Peripheral Control functions - * @brief RCC clocks control functions - * -@verbatim - =============================================================================== - ##### Peripheral Control functions ##### - =============================================================================== - [..] - This subsection provides a set of functions allowing to: - - (+) Output clock to MCO pin. - (+) Retrieve current clock frequencies. - (+) Enable the Clock Security System. - -@endverbatim - * @{ - */ - -/** - * @brief Select the clock source to output on MCO pin(PA8). - * @note PA8 should be configured in alternate function mode. - * @param RCC_MCOx specifies the output direction for the clock source. - * For STM32L4xx family this parameter can have only one value: - * @arg @ref RCC_MCO1 Clock source to output on MCO1 pin(PA8). - * @param RCC_MCOSource specifies the clock source to output. - * This parameter can be one of the following values: - * @arg @ref RCC_MCO1SOURCE_NOCLOCK MCO output disabled, no clock on MCO - * @arg @ref RCC_MCO1SOURCE_SYSCLK system clock selected as MCO source - * @arg @ref RCC_MCO1SOURCE_MSI MSI clock selected as MCO source - * @arg @ref RCC_MCO1SOURCE_HSI HSI clock selected as MCO source - * @arg @ref RCC_MCO1SOURCE_HSE HSE clock selected as MCO sourcee - * @arg @ref RCC_MCO1SOURCE_PLLCLK main PLL clock selected as MCO source - * @arg @ref RCC_MCO1SOURCE_LSI LSI clock selected as MCO source - * @arg @ref RCC_MCO1SOURCE_LSE LSE clock selected as MCO source - @if STM32L443xx - * @arg @ref RCC_MCO1SOURCE_HSI48 HSI48 clock selected as MCO source for devices with HSI48 - @endif - * @param RCC_MCODiv specifies the MCO prescaler. - * This parameter can be one of the following values: - * @arg @ref RCC_MCODIV_1 no division applied to MCO clock - * @arg @ref RCC_MCODIV_2 division by 2 applied to MCO clock - * @arg @ref RCC_MCODIV_4 division by 4 applied to MCO clock - * @arg @ref RCC_MCODIV_8 division by 8 applied to MCO clock - * @arg @ref RCC_MCODIV_16 division by 16 applied to MCO clock - * @retval None - */ -void HAL_RCC_MCOConfig( uint32_t RCC_MCOx, uint32_t RCC_MCOSource, uint32_t RCC_MCODiv) -{ - GPIO_InitTypeDef GPIO_InitStruct; - - /* Check the parameters */ - assert_param(IS_RCC_MCO(RCC_MCOx)); - assert_param(IS_RCC_MCODIV(RCC_MCODiv)); - assert_param(IS_RCC_MCO1SOURCE(RCC_MCOSource)); - - /* Prevent unused argument(s) compilation warning if no assert_param check */ - UNUSED(RCC_MCOx); - - /* MCO Clock Enable */ - __MCO1_CLK_ENABLE(); - - /* Configure the MCO1 pin in alternate function mode */ - GPIO_InitStruct.Pin = MCO1_PIN; - GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; - GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; - GPIO_InitStruct.Pull = GPIO_NOPULL; - GPIO_InitStruct.Alternate = GPIO_AF0_MCO; - HAL_GPIO_Init(MCO1_GPIO_PORT, &GPIO_InitStruct); - - /* Mask MCOSEL[] and MCOPRE[] bits then set MCO1 clock source and prescaler */ - MODIFY_REG(RCC->CFGR, (RCC_CFGR_MCOSEL | RCC_CFGR_MCOPRE), (RCC_MCOSource | RCC_MCODiv )); -} - -/** - * @brief Return the SYSCLK frequency. - * - * @note The system frequency computed by this function is not the real - * frequency in the chip. It is calculated based on the predefined - * constant and the selected clock source: - * @note If SYSCLK source is MSI, function returns values based on MSI - * Value as defined by the MSI range. - * @note If SYSCLK source is HSI, function returns values based on HSI_VALUE(*) - * @note If SYSCLK source is HSE, function returns values based on HSE_VALUE(**) - * @note If SYSCLK source is PLL, function returns values based on HSE_VALUE(**), - * HSI_VALUE(*) or MSI Value multiplied/divided by the PLL factors. - * @note (*) HSI_VALUE is a constant defined in stm32l4xx_hal_conf.h file (default value - * 16 MHz) but the real value may vary depending on the variations - * in voltage and temperature. - * @note (**) HSE_VALUE is a constant defined in stm32l4xx_hal_conf.h file (default value - * 8 MHz), user has to ensure that HSE_VALUE is same as the real - * frequency of the crystal used. Otherwise, this function may - * have wrong result. - * - * @note The result of this function could be not correct when using fractional - * value for HSE crystal. - * - * @note This function can be used by the user application to compute the - * baudrate for the communication peripherals or configure other parameters. - * - * @note Each time SYSCLK changes, this function must be called to update the - * right SYSCLK value. Otherwise, any configuration based on this function will be incorrect. - * - * - * @retval SYSCLK frequency - */ -uint32_t HAL_RCC_GetSysClockFreq(void) -{ - uint32_t msirange = 0U, sysclockfreq = 0U; - uint32_t pllvco, pllsource, pllr, pllm; /* no init needed */ - uint32_t sysclk_source, pll_oscsource; - - sysclk_source = __HAL_RCC_GET_SYSCLK_SOURCE(); - pll_oscsource = __HAL_RCC_GET_PLL_OSCSOURCE(); - - if((sysclk_source == RCC_CFGR_SWS_MSI) || - ((sysclk_source == RCC_CFGR_SWS_PLL) && (pll_oscsource == RCC_PLLSOURCE_MSI))) - { - /* MSI or PLL with MSI source used as system clock source */ - - /* Get SYSCLK source */ - if(READ_BIT(RCC->CR, RCC_CR_MSIRGSEL) == 0U) - { /* MSISRANGE from RCC_CSR applies */ - msirange = READ_BIT(RCC->CSR, RCC_CSR_MSISRANGE) >> RCC_CSR_MSISRANGE_Pos; - } - else - { /* MSIRANGE from RCC_CR applies */ - msirange = READ_BIT(RCC->CR, RCC_CR_MSIRANGE) >> RCC_CR_MSIRANGE_Pos; - } - /*MSI frequency range in HZ*/ - msirange = MSIRangeTable[msirange]; - - if(sysclk_source == RCC_CFGR_SWS_MSI) - { - /* MSI used as system clock source */ - sysclockfreq = msirange; - } - } - else if(sysclk_source == RCC_CFGR_SWS_HSI) - { - /* HSI used as system clock source */ - sysclockfreq = HSI_VALUE; - } - else if(sysclk_source == RCC_CFGR_SWS_HSE) - { - /* HSE used as system clock source */ - sysclockfreq = HSE_VALUE; - } - else - { - /* unexpected case: sysclockfreq at 0 */ - } - - if(sysclk_source == RCC_CFGR_SWS_PLL) - { - /* PLL used as system clock source */ - - /* PLL_VCO = (HSE_VALUE or HSI_VALUE or MSI_VALUE) * PLLN / PLLM - SYSCLK = PLL_VCO / PLLR - */ - pllsource = READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC); - - switch (pllsource) - { - case RCC_PLLSOURCE_HSI: /* HSI used as PLL clock source */ - pllvco = HSI_VALUE; - break; - - case RCC_PLLSOURCE_HSE: /* HSE used as PLL clock source */ - pllvco = HSE_VALUE; - break; - - case RCC_PLLSOURCE_MSI: /* MSI used as PLL clock source */ - default: - pllvco = msirange; - break; - } - pllm = (READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLM) >> RCC_PLLCFGR_PLLM_Pos) + 1U ; - pllvco = (pllvco * (READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLN) >> RCC_PLLCFGR_PLLN_Pos)) / pllm; - pllr = ((READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLR) >> RCC_PLLCFGR_PLLR_Pos) + 1U ) * 2U; - sysclockfreq = pllvco / pllr; - } - - return sysclockfreq; -} - -/** - * @brief Return the HCLK frequency. - * @note Each time HCLK changes, this function must be called to update the - * right HCLK value. Otherwise, any configuration based on this function will be incorrect. - * - * @note The SystemCoreClock CMSIS variable is used to store System Clock Frequency. - * @retval HCLK frequency in Hz - */ -uint32_t HAL_RCC_GetHCLKFreq(void) -{ - return SystemCoreClock; -} - -/** - * @brief Return the PCLK1 frequency. - * @note Each time PCLK1 changes, this function must be called to update the - * right PCLK1 value. Otherwise, any configuration based on this function will be incorrect. - * @retval PCLK1 frequency in Hz - */ -uint32_t HAL_RCC_GetPCLK1Freq(void) -{ - /* Get HCLK source and Compute PCLK1 frequency ---------------------------*/ - return (HAL_RCC_GetHCLKFreq() >> (APBPrescTable[READ_BIT(RCC->CFGR, RCC_CFGR_PPRE1) >> RCC_CFGR_PPRE1_Pos] & 0x1FU)); -} - -/** - * @brief Return the PCLK2 frequency. - * @note Each time PCLK2 changes, this function must be called to update the - * right PCLK2 value. Otherwise, any configuration based on this function will be incorrect. - * @retval PCLK2 frequency in Hz - */ -uint32_t HAL_RCC_GetPCLK2Freq(void) -{ - /* Get HCLK source and Compute PCLK2 frequency ---------------------------*/ - return (HAL_RCC_GetHCLKFreq()>> (APBPrescTable[READ_BIT(RCC->CFGR, RCC_CFGR_PPRE2) >> RCC_CFGR_PPRE2_Pos] & 0x1FU)); -} - -/** - * @brief Configure the RCC_OscInitStruct according to the internal - * RCC configuration registers. - * @param RCC_OscInitStruct pointer to an RCC_OscInitTypeDef structure that - * will be configured. - * @retval None - */ -void HAL_RCC_GetOscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct) -{ - /* Check the parameters */ - assert_param(RCC_OscInitStruct != (void *)NULL); - - /* Set all possible values for the Oscillator type parameter ---------------*/ -#if defined(RCC_HSI48_SUPPORT) - RCC_OscInitStruct->OscillatorType = RCC_OSCILLATORTYPE_HSE | RCC_OSCILLATORTYPE_HSI | RCC_OSCILLATORTYPE_MSI | \ - RCC_OSCILLATORTYPE_LSE | RCC_OSCILLATORTYPE_LSI | RCC_OSCILLATORTYPE_HSI48; -#else - RCC_OscInitStruct->OscillatorType = RCC_OSCILLATORTYPE_HSE | RCC_OSCILLATORTYPE_HSI | RCC_OSCILLATORTYPE_MSI | \ - RCC_OSCILLATORTYPE_LSE | RCC_OSCILLATORTYPE_LSI; -#endif /* RCC_HSI48_SUPPORT */ - - /* Get the HSE configuration -----------------------------------------------*/ - if(READ_BIT(RCC->CR, RCC_CR_HSEBYP) == RCC_CR_HSEBYP) - { - RCC_OscInitStruct->HSEState = RCC_HSE_BYPASS; - } - else if(READ_BIT(RCC->CR, RCC_CR_HSEON) == RCC_CR_HSEON) - { - RCC_OscInitStruct->HSEState = RCC_HSE_ON; - } - else - { - RCC_OscInitStruct->HSEState = RCC_HSE_OFF; - } - - /* Get the MSI configuration -----------------------------------------------*/ - if(READ_BIT(RCC->CR, RCC_CR_MSION) == RCC_CR_MSION) - { - RCC_OscInitStruct->MSIState = RCC_MSI_ON; - } - else - { - RCC_OscInitStruct->MSIState = RCC_MSI_OFF; - } - - RCC_OscInitStruct->MSICalibrationValue = READ_BIT(RCC->ICSCR, RCC_ICSCR_MSITRIM) >> RCC_ICSCR_MSITRIM_Pos; - RCC_OscInitStruct->MSIClockRange = READ_BIT(RCC->CR, RCC_CR_MSIRANGE); - - /* Get the HSI configuration -----------------------------------------------*/ - if(READ_BIT(RCC->CR, RCC_CR_HSION) == RCC_CR_HSION) - { - RCC_OscInitStruct->HSIState = RCC_HSI_ON; - } - else - { - RCC_OscInitStruct->HSIState = RCC_HSI_OFF; - } - - RCC_OscInitStruct->HSICalibrationValue = READ_BIT(RCC->ICSCR, RCC_ICSCR_HSITRIM) >> RCC_ICSCR_HSITRIM_Pos; - - /* Get the LSE configuration -----------------------------------------------*/ - if(READ_BIT(RCC->BDCR, RCC_BDCR_LSEBYP) == RCC_BDCR_LSEBYP) - { -#if defined(RCC_BDCR_LSESYSDIS) - if((RCC->BDCR & RCC_BDCR_LSESYSDIS) == RCC_BDCR_LSESYSDIS) - { - RCC_OscInitStruct->LSEState = RCC_LSE_BYPASS_RTC_ONLY; - } - else -#endif /* RCC_BDCR_LSESYSDIS */ - { - RCC_OscInitStruct->LSEState = RCC_LSE_BYPASS; - } - } - else if(READ_BIT(RCC->BDCR, RCC_BDCR_LSEON) == RCC_BDCR_LSEON) - { -#if defined(RCC_BDCR_LSESYSDIS) - if((RCC->BDCR & RCC_BDCR_LSESYSDIS) == RCC_BDCR_LSESYSDIS) - { - RCC_OscInitStruct->LSEState = RCC_LSE_ON_RTC_ONLY; - } - else -#endif /* RCC_BDCR_LSESYSDIS */ - { - RCC_OscInitStruct->LSEState = RCC_LSE_ON; - } - } - else - { - RCC_OscInitStruct->LSEState = RCC_LSE_OFF; - } - - /* Get the LSI configuration -----------------------------------------------*/ - if(READ_BIT(RCC->CSR, RCC_CSR_LSION) == RCC_CSR_LSION) - { - RCC_OscInitStruct->LSIState = RCC_LSI_ON; - } - else - { - RCC_OscInitStruct->LSIState = RCC_LSI_OFF; - } -#if defined(RCC_CSR_LSIPREDIV) - - /* Get the LSI configuration -----------------------------------------------*/ - if((RCC->CSR & RCC_CSR_LSIPREDIV) == RCC_CSR_LSIPREDIV) - { - RCC_OscInitStruct->LSIDiv = RCC_LSI_DIV128; - } - else - { - RCC_OscInitStruct->LSIDiv = RCC_LSI_DIV1; - } -#endif /* RCC_CSR_LSIPREDIV */ - -#if defined(RCC_HSI48_SUPPORT) - /* Get the HSI48 configuration ---------------------------------------------*/ - if(READ_BIT(RCC->CRRCR, RCC_CRRCR_HSI48ON) == RCC_CRRCR_HSI48ON) - { - RCC_OscInitStruct->HSI48State = RCC_HSI48_ON; - } - else - { - RCC_OscInitStruct->HSI48State = RCC_HSI48_OFF; - } -#else - RCC_OscInitStruct->HSI48State = RCC_HSI48_OFF; -#endif /* RCC_HSI48_SUPPORT */ - - /* Get the PLL configuration -----------------------------------------------*/ - if(READ_BIT(RCC->CR, RCC_CR_PLLON) == RCC_CR_PLLON) - { - RCC_OscInitStruct->PLL.PLLState = RCC_PLL_ON; - } - else - { - RCC_OscInitStruct->PLL.PLLState = RCC_PLL_OFF; - } - RCC_OscInitStruct->PLL.PLLSource = READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC); - RCC_OscInitStruct->PLL.PLLM = (READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLM) >> RCC_PLLCFGR_PLLM_Pos) + 1U; - RCC_OscInitStruct->PLL.PLLN = READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLN) >> RCC_PLLCFGR_PLLN_Pos; - RCC_OscInitStruct->PLL.PLLQ = (((READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLQ) >> RCC_PLLCFGR_PLLQ_Pos) + 1U) << 1U); - RCC_OscInitStruct->PLL.PLLR = (((READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLR) >> RCC_PLLCFGR_PLLR_Pos) + 1U) << 1U); -#if defined(RCC_PLLP_SUPPORT) -#if defined(RCC_PLLP_DIV_2_31_SUPPORT) - RCC_OscInitStruct->PLL.PLLP = READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLPDIV) >> RCC_PLLCFGR_PLLPDIV_Pos; -#else - if(READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLP) != 0U) - { - RCC_OscInitStruct->PLL.PLLP = RCC_PLLP_DIV17; - } - else - { - RCC_OscInitStruct->PLL.PLLP = RCC_PLLP_DIV7; - } -#endif /* RCC_PLLP_DIV_2_31_SUPPORT */ -#endif /* RCC_PLLP_SUPPORT */ -} - -/** - * @brief Configure the RCC_ClkInitStruct according to the internal - * RCC configuration registers. - * @param RCC_ClkInitStruct pointer to an RCC_ClkInitTypeDef structure that - * will be configured. - * @param pFLatency Pointer on the Flash Latency. - * @retval None - */ -void HAL_RCC_GetClockConfig(RCC_ClkInitTypeDef *RCC_ClkInitStruct, uint32_t *pFLatency) -{ - /* Check the parameters */ - assert_param(RCC_ClkInitStruct != (void *)NULL); - assert_param(pFLatency != (void *)NULL); - - /* Set all possible values for the Clock type parameter --------------------*/ - RCC_ClkInitStruct->ClockType = RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2; - - /* Get the SYSCLK configuration --------------------------------------------*/ - RCC_ClkInitStruct->SYSCLKSource = READ_BIT(RCC->CFGR, RCC_CFGR_SW); - - /* Get the HCLK configuration ----------------------------------------------*/ - RCC_ClkInitStruct->AHBCLKDivider = READ_BIT(RCC->CFGR, RCC_CFGR_HPRE); - - /* Get the APB1 configuration ----------------------------------------------*/ - RCC_ClkInitStruct->APB1CLKDivider = READ_BIT(RCC->CFGR, RCC_CFGR_PPRE1); - - /* Get the APB2 configuration ----------------------------------------------*/ - RCC_ClkInitStruct->APB2CLKDivider = (READ_BIT(RCC->CFGR, RCC_CFGR_PPRE2) >> 3U); - - /* Get the Flash Wait State (Latency) configuration ------------------------*/ - *pFLatency = __HAL_FLASH_GET_LATENCY(); -} - -/** - * @brief Enable the Clock Security System. - * @note If a failure is detected on the HSE oscillator clock, this oscillator - * is automatically disabled and an interrupt is generated to inform the - * software about the failure (Clock Security System Interrupt, CSSI), - * allowing the MCU to perform rescue operations. The CSSI is linked to - * the Cortex-M4 NMI (Non-Maskable Interrupt) exception vector. - * @note The Clock Security System can only be cleared by reset. - * @retval None - */ -void HAL_RCC_EnableCSS(void) -{ - SET_BIT(RCC->CR, RCC_CR_CSSON) ; -} - -/** - * @brief Handle the RCC Clock Security System interrupt request. - * @note This API should be called under the NMI_Handler(). - * @retval None - */ -void HAL_RCC_NMI_IRQHandler(void) -{ - /* Check RCC CSSF interrupt flag */ - if(__HAL_RCC_GET_IT(RCC_IT_CSS)) - { - /* RCC Clock Security System interrupt user callback */ - HAL_RCC_CSSCallback(); - - /* Clear RCC CSS pending bit */ - __HAL_RCC_CLEAR_IT(RCC_IT_CSS); - } -} - -/** - * @brief RCC Clock Security System interrupt callback. - * @retval none - */ -__weak void HAL_RCC_CSSCallback(void) -{ - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_RCC_CSSCallback should be implemented in the user file - */ -} - -/** - * @brief Get and clear reset flags - * @param None - * @note Once reset flags are retrieved, this API is clearing them in order - * to isolate next reset reason. - * @retval can be a combination of @ref RCC_Reset_Flag - */ -uint32_t HAL_RCC_GetResetSource(void) -{ - uint32_t reset; - - /* Get all reset flags */ - reset = RCC->CSR & RCC_RESET_FLAG_ALL; - - /* Clear Reset flags */ - RCC->CSR |= RCC_CSR_RMVF; - - return reset; -} - -/** * @} - */ - -/** - * @} - */ - -/* Private function prototypes -----------------------------------------------*/ -/** @addtogroup RCC_Private_Functions - * @{ - */ -/** - * @brief Update number of Flash wait states in line with MSI range and current - voltage range. - * @param msirange MSI range value from RCC_MSIRANGE_0 to RCC_MSIRANGE_11 - * @retval HAL status - */ -static HAL_StatusTypeDef RCC_SetFlashLatencyFromMSIRange(uint32_t msirange) -{ - uint32_t vos; - uint32_t latency = FLASH_LATENCY_0; /* default value 0WS */ - - if(__HAL_RCC_PWR_IS_CLK_ENABLED()) - { - vos = HAL_PWREx_GetVoltageRange(); - } - else - { - __HAL_RCC_PWR_CLK_ENABLE(); - vos = HAL_PWREx_GetVoltageRange(); - __HAL_RCC_PWR_CLK_DISABLE(); - } - - if(vos == PWR_REGULATOR_VOLTAGE_SCALE1) - { - if(msirange > RCC_MSIRANGE_8) - { - /* MSI > 16Mhz */ - if(msirange > RCC_MSIRANGE_10) - { - /* MSI 48Mhz */ - latency = FLASH_LATENCY_2; /* 2WS */ - } - else - { - /* MSI 24Mhz or 32Mhz */ - latency = FLASH_LATENCY_1; /* 1WS */ - } - } - /* else MSI <= 16Mhz default FLASH_LATENCY_0 0WS */ - } - else - { -#if defined(STM32L4P5xx) || defined(STM32L4Q5xx) || \ - defined(STM32L4R5xx) || defined(STM32L4R7xx) || defined(STM32L4R9xx) || defined(STM32L4S5xx) || defined(STM32L4S7xx) || defined(STM32L4S9xx) - if(msirange >= RCC_MSIRANGE_8) - { - /* MSI >= 16Mhz */ - latency = FLASH_LATENCY_2; /* 2WS */ - } - else - { - if(msirange == RCC_MSIRANGE_7) - { - /* MSI 8Mhz */ - latency = FLASH_LATENCY_1; /* 1WS */ - } - /* else MSI < 8Mhz default FLASH_LATENCY_0 0WS */ - } -#else - if(msirange > RCC_MSIRANGE_8) - { - /* MSI > 16Mhz */ - latency = FLASH_LATENCY_3; /* 3WS */ - } - else - { - if(msirange == RCC_MSIRANGE_8) - { - /* MSI 16Mhz */ - latency = FLASH_LATENCY_2; /* 2WS */ - } - else if(msirange == RCC_MSIRANGE_7) - { - /* MSI 8Mhz */ - latency = FLASH_LATENCY_1; /* 1WS */ - } - /* else MSI < 8Mhz default FLASH_LATENCY_0 0WS */ - } -#endif - } - - __HAL_FLASH_SET_LATENCY(latency); - - /* Check that the new number of wait states is taken into account to access the Flash - memory by reading the FLASH_ACR register */ - if(__HAL_FLASH_GET_LATENCY() != latency) - { - return HAL_ERROR; - } - - return HAL_OK; -} - -#if defined(STM32L4P5xx) || defined(STM32L4Q5xx) || \ - defined(STM32L4R5xx) || defined(STM32L4R7xx) || defined(STM32L4R9xx) || defined(STM32L4S5xx) || defined(STM32L4S7xx) || defined(STM32L4S9xx) -/** - * @brief Compute SYSCLK frequency based on PLL SYSCLK source. - * @retval SYSCLK frequency - */ -static uint32_t RCC_GetSysClockFreqFromPLLSource(void) -{ - uint32_t msirange, pllvco, pllsource, pllr, pllm, sysclockfreq; /* no init needed */ - - /* PLL_VCO = (HSE_VALUE or HSI_VALUE or MSI_VALUE) * PLLN / PLLM - SYSCLK = PLL_VCO / PLLR - */ - pllsource = READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC); - - switch (pllsource) - { - case RCC_PLLSOURCE_HSI: /* HSI used as PLL clock source */ - pllvco = HSI_VALUE; - break; - - case RCC_PLLSOURCE_HSE: /* HSE used as PLL clock source */ - pllvco = HSE_VALUE; - break; - - case RCC_PLLSOURCE_MSI: /* MSI used as PLL clock source */ - /* Get MSI range source */ - if(READ_BIT(RCC->CR, RCC_CR_MSIRGSEL) == 0U) - { /* MSISRANGE from RCC_CSR applies */ - msirange = READ_BIT(RCC->CSR, RCC_CSR_MSISRANGE) >> RCC_CSR_MSISRANGE_Pos; - } - else - { /* MSIRANGE from RCC_CR applies */ - msirange = READ_BIT(RCC->CR, RCC_CR_MSIRANGE) >> RCC_CR_MSIRANGE_Pos; - } - /*MSI frequency range in HZ*/ - pllvco = MSIRangeTable[msirange]; - break; - default: - /* unexpected */ - pllvco = 0; - break; - } - pllm = (READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLM) >> RCC_PLLCFGR_PLLM_Pos) + 1U ; - pllvco = (pllvco * (READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLN) >> RCC_PLLCFGR_PLLN_Pos)) / pllm; - pllr = ((READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLR) >> RCC_PLLCFGR_PLLR_Pos) + 1U ) * 2U; - sysclockfreq = pllvco / pllr; - - return sysclockfreq; -} -#endif - -/** - * @} - */ - -#endif /* HAL_RCC_MODULE_ENABLED */ -/** - * @} - */ - -/** - * @} - */ - +/** + ****************************************************************************** + * @file stm32l4xx_hal_rcc.c + * @author MCD Application Team + * @brief RCC HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Reset and Clock Control (RCC) peripheral: + * + Initialization and de-initialization functions + * + Peripheral Control functions + * + @verbatim + ============================================================================== + ##### RCC specific features ##### + ============================================================================== + [..] + After reset the device is running from Multiple Speed Internal oscillator + (4 MHz) with Flash 0 wait state. Flash prefetch buffer, D-Cache + and I-Cache are disabled, and all peripherals are off except internal + SRAM, Flash and JTAG. + + (+) There is no prescaler on High speed (AHBs) and Low speed (APBs) busses: + all peripherals mapped on these busses are running at MSI speed. + (+) The clock for all peripherals is switched off, except the SRAM and FLASH. + (+) All GPIOs are in analog mode, except the JTAG pins which + are assigned to be used for debug purpose. + + [..] + Once the device started from reset, the user application has to: + (+) Configure the clock source to be used to drive the System clock + (if the application needs higher frequency/performance) + (+) Configure the System clock frequency and Flash settings + (+) Configure the AHB and APB busses prescalers + (+) Enable the clock for the peripheral(s) to be used + (+) Configure the clock source(s) for peripherals which clocks are not + derived from the System clock (SAIx, RTC, ADC, USB OTG FS/SDMMC1/RNG) + + @endverbatim + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file in + * the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l4xx_hal.h" + +/** @addtogroup STM32L4xx_HAL_Driver + * @{ + */ + +/** @defgroup RCC RCC + * @brief RCC HAL module driver + * @{ + */ + +#ifdef HAL_RCC_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/** @defgroup RCC_Private_Constants RCC Private Constants + * @{ + */ +#define HSE_TIMEOUT_VALUE HSE_STARTUP_TIMEOUT +#define HSI_TIMEOUT_VALUE 2U /* 2 ms (minimum Tick + 1) */ +#define MSI_TIMEOUT_VALUE 2U /* 2 ms (minimum Tick + 1) */ +#if defined(RCC_CSR_LSIPREDIV) +#define LSI_TIMEOUT_VALUE 17U /* 17 ms (16 ms starting time + 1) */ +#else +#define LSI_TIMEOUT_VALUE 2U /* 2 ms (minimum Tick + 1) */ +#endif /* RCC_CSR_LSIPREDIV */ +#define HSI48_TIMEOUT_VALUE 2U /* 2 ms (minimum Tick + 1) */ +#define PLL_TIMEOUT_VALUE 2U /* 2 ms (minimum Tick + 1) */ +#define CLOCKSWITCH_TIMEOUT_VALUE 5000U /* 5 s */ +/** + * @} + */ + +/* Private macro -------------------------------------------------------------*/ +/** @defgroup RCC_Private_Macros RCC Private Macros + * @{ + */ +#define __MCO1_CLK_ENABLE() __HAL_RCC_GPIOA_CLK_ENABLE() +#define MCO1_GPIO_PORT GPIOA +#define MCO1_PIN GPIO_PIN_8 + +#define RCC_PLL_OSCSOURCE_CONFIG(__HAL_RCC_PLLSOURCE__) \ + (MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC, (__HAL_RCC_PLLSOURCE__))) +/** + * @} + */ + +/* Private variables ---------------------------------------------------------*/ + +/* Private function prototypes -----------------------------------------------*/ +/** @defgroup RCC_Private_Functions RCC Private Functions + * @{ + */ +static HAL_StatusTypeDef RCC_SetFlashLatencyFromMSIRange(uint32_t msirange); +#if defined(STM32L4P5xx) || defined(STM32L4Q5xx) || \ + defined(STM32L4R5xx) || defined(STM32L4R7xx) || defined(STM32L4R9xx) || defined(STM32L4S5xx) || defined(STM32L4S7xx) || defined(STM32L4S9xx) +static uint32_t RCC_GetSysClockFreqFromPLLSource(void); +#endif +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup RCC_Exported_Functions RCC Exported Functions + * @{ + */ + +/** @defgroup RCC_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and Configuration functions + * + @verbatim + =============================================================================== + ##### Initialization and de-initialization functions ##### + =============================================================================== + [..] + This section provides functions allowing to configure the internal and external oscillators + (HSE, HSI, LSE, MSI, LSI, PLL, CSS and MCO) and the System busses clocks (SYSCLK, AHB, APB1 + and APB2). + + [..] Internal/external clock and PLL configuration + (+) HSI (high-speed internal): 16 MHz factory-trimmed RC used directly or through + the PLL as System clock source. + + (+) MSI (Multiple Speed Internal): Its frequency is software trimmable from 100KHZ to 48MHZ. + It can be used to generate the clock for the USB OTG FS (48 MHz). + The number of flash wait states is automatically adjusted when MSI range is updated with + HAL_RCC_OscConfig() and the MSI is used as System clock source. + + (+) LSI (low-speed internal): 32 KHz low consumption RC used as IWDG and/or RTC + clock source. + + (+) HSE (high-speed external): 4 to 48 MHz crystal oscillator used directly or + through the PLL as System clock source. Can be used also optionally as RTC clock source. + + (+) LSE (low-speed external): 32.768 KHz oscillator used optionally as RTC clock source. + + (+) PLL (clocked by HSI, HSE or MSI) providing up to three independent output clocks: + (++) The first output is used to generate the high speed system clock (up to 80MHz). + (++) The second output is used to generate the clock for the USB OTG FS (48 MHz), + the random analog generator (<=48 MHz) and the SDMMC1 (<= 48 MHz). + (++) The third output is used to generate an accurate clock to achieve + high-quality audio performance on SAI interface. + + (+) PLLSAI1 (clocked by HSI, HSE or MSI) providing up to three independent output clocks: + (++) The first output is used to generate SAR ADC1 clock. + (++) The second output is used to generate the clock for the USB OTG FS (48 MHz), + the random analog generator (<=48 MHz) and the SDMMC1 (<= 48 MHz). + (++) The third output is used to generate an accurate clock to achieve + high-quality audio performance on SAI interface. + + (+) PLLSAI2 (clocked by HSI, HSE or MSI) providing up to three independent output clocks: + (++) The first output is used to generate an accurate clock to achieve + high-quality audio performance on SAI interface. + (++) The second output is used to generate either SAR ADC2 clock if ADC2 is present + or LCD clock if LTDC is present. + (++) The third output is used to generate DSI clock if DSI is present. + + (+) CSS (Clock security system): once enabled, if a HSE clock failure occurs + (HSE used directly or through PLL as System clock source), the System clock + is automatically switched to HSI and an interrupt is generated if enabled. + The interrupt is linked to the Cortex-M4 NMI (Non-Maskable Interrupt) + exception vector. + + (+) MCO (microcontroller clock output): used to output MSI, LSI, HSI, LSE, HSE or + main PLL clock (through a configurable prescaler) on PA8 pin. + + [..] System, AHB and APB busses clocks configuration + (+) Several clock sources can be used to drive the System clock (SYSCLK): MSI, HSI, + HSE and main PLL. + The AHB clock (HCLK) is derived from System clock through configurable + prescaler and used to clock the CPU, memory and peripherals mapped + on AHB bus (DMA, GPIO...). APB1 (PCLK1) and APB2 (PCLK2) clocks are derived + from AHB clock through configurable prescalers and used to clock + the peripherals mapped on these busses. You can use + "HAL_RCC_GetSysClockFreq()" function to retrieve the frequencies of these clocks. + + -@- All the peripheral clocks are derived from the System clock (SYSCLK) except: + + (+@) SAI: the SAI clock can be derived either from a specific PLL (PLLSAI1) or (PLLSAI2) or + from an external clock mapped on the SAI_CKIN pin. + You have to use HAL_RCCEx_PeriphCLKConfig() function to configure this clock. + (+@) RTC: the RTC clock can be derived either from the LSI, LSE or HSE clock + divided by 2 to 31. + You have to use __HAL_RCC_RTC_ENABLE() and HAL_RCCEx_PeriphCLKConfig() function + to configure this clock. + (+@) USB OTG FS, SDMMC1 and RNG: USB OTG FS requires a frequency equal to 48 MHz + to work correctly, while the SDMMC1 and RNG peripherals require a frequency + equal or lower than to 48 MHz. This clock is derived of the main PLL or PLLSAI1 + through PLLQ divider. You have to enable the peripheral clock and use + HAL_RCCEx_PeriphCLKConfig() function to configure this clock. + (+@) IWDG clock which is always the LSI clock. + + + (+) The maximum frequency of the SYSCLK, HCLK, PCLK1 and PCLK2 is 80 MHz. + The clock source frequency should be adapted depending on the device voltage range + as listed in the Reference Manual "Clock source frequency versus voltage scaling" chapter. + + @endverbatim + + Table 1. HCLK clock frequency for other STM32L4 devices + +-------------------------------------------------------+ + | Latency | HCLK clock frequency (MHz) | + | |-------------------------------------| + | | voltage range 1 | voltage range 2 | + | | 1.2 V | 1.0 V | + |-----------------|------------------|------------------| + |0WS(1 CPU cycles)| 0 < HCLK <= 16 | 0 < HCLK <= 6 | + |-----------------|------------------|------------------| + |1WS(2 CPU cycles)| 16 < HCLK <= 32 | 6 < HCLK <= 12 | + |-----------------|------------------|------------------| + |2WS(3 CPU cycles)| 32 < HCLK <= 48 | 12 < HCLK <= 18 | + |-----------------|------------------|------------------| + |3WS(4 CPU cycles)| 48 < HCLK <= 64 | 18 < HCLK <= 26 | + |-----------------|------------------|------------------| + |4WS(5 CPU cycles)| 64 < HCLK <= 80 | 18 < HCLK <= 26 | + +-------------------------------------------------------+ + + Table 2. HCLK clock frequency for STM32L4+ devices + +--------------------------------------------------------+ + | Latency | HCLK clock frequency (MHz) | + | |--------------------------------------| + | | voltage range 1 | voltage range 2 | + | | 1.2 V | 1.0 V | + |-----------------|-------------------|------------------| + |0WS(1 CPU cycles)| 0 < HCLK <= 20 | 0 < HCLK <= 8 | + |-----------------|-------------------|------------------| + |1WS(2 CPU cycles)| 20 < HCLK <= 40 | 8 < HCLK <= 16 | + |-----------------|-------------------|------------------| + |2WS(3 CPU cycles)| 40 < HCLK <= 60 | 16 < HCLK <= 26 | + |-----------------|-------------------|------------------| + |3WS(4 CPU cycles)| 60 < HCLK <= 80 | 16 < HCLK <= 26 | + |-----------------|-------------------|------------------| + |4WS(5 CPU cycles)| 80 < HCLK <= 100 | 16 < HCLK <= 26 | + |-----------------|-------------------|------------------| + |5WS(6 CPU cycles)| 100 < HCLK <= 120 | 16 < HCLK <= 26 | + +--------------------------------------------------------+ + * @{ + */ + +/** + * @brief Reset the RCC clock configuration to the default reset state. + * @note The default reset state of the clock configuration is given below: + * - MSI ON and used as system clock source + * - HSE, HSI, PLL, PLLSAI1 and PLLSAI2 OFF + * - AHB, APB1 and APB2 prescalers set to 1. + * - CSS, MCO1 OFF + * - All interrupts disabled + * - All interrupt and reset flags cleared + * @note This function does not modify the configuration of the + * - Peripheral clock sources + * - LSI, LSE and RTC clocks (Backup domain) + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RCC_DeInit(void) +{ + uint32_t tickstart; + + /* Reset to default System clock */ + /* Set MSION bit */ + SET_BIT(RCC->CR, RCC_CR_MSION); + + /* Insure MSIRDY bit is set before writing default MSIRANGE value */ + /* Get start tick */ + tickstart = HAL_GetTick(); + + /* Wait till MSI is ready */ + while(READ_BIT(RCC->CR, RCC_CR_MSIRDY) == 0U) + { + if((HAL_GetTick() - tickstart) > MSI_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + + /* Set MSIRANGE default value */ + MODIFY_REG(RCC->CR, RCC_CR_MSIRANGE, RCC_MSIRANGE_6); + + /* Reset CFGR register (MSI is selected as system clock source) */ + CLEAR_REG(RCC->CFGR); + + /* Update the SystemCoreClock global variable for MSI as system clock source */ + SystemCoreClock = MSI_VALUE; + + /* Configure the source of time base considering new system clock settings */ + if(HAL_InitTick(uwTickPrio) != HAL_OK) + { + return HAL_ERROR; + } + + /* Insure MSI selected as system clock source */ + /* Get start tick */ + tickstart = HAL_GetTick(); + + /* Wait till system clock source is ready */ + while(READ_BIT(RCC->CFGR, RCC_CFGR_SWS) != RCC_CFGR_SWS_MSI) + { + if((HAL_GetTick() - tickstart) > CLOCKSWITCH_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + + /* Reset HSION, HSIKERON, HSIASFS, HSEON, HSECSSON, PLLON, PLLSAIxON bits */ +#if defined(RCC_PLLSAI2_SUPPORT) + + CLEAR_BIT(RCC->CR, RCC_CR_HSEON | RCC_CR_HSION | RCC_CR_HSIKERON| RCC_CR_HSIASFS | RCC_CR_PLLON | RCC_CR_PLLSAI1ON | RCC_CR_PLLSAI2ON); + +#elif defined(RCC_PLLSAI1_SUPPORT) + + CLEAR_BIT(RCC->CR, RCC_CR_HSEON | RCC_CR_HSION | RCC_CR_HSIKERON| RCC_CR_HSIASFS | RCC_CR_PLLON | RCC_CR_PLLSAI1ON); + +#else + + CLEAR_BIT(RCC->CR, RCC_CR_HSEON | RCC_CR_HSION | RCC_CR_HSIKERON| RCC_CR_HSIASFS | RCC_CR_PLLON); + +#endif /* RCC_PLLSAI2_SUPPORT */ + + /* Insure PLLRDY, PLLSAI1RDY and PLLSAI2RDY (if present) are reset */ + /* Get start tick */ + tickstart = HAL_GetTick(); + +#if defined(RCC_PLLSAI2_SUPPORT) + + while(READ_BIT(RCC->CR, RCC_CR_PLLRDY | RCC_CR_PLLSAI1RDY | RCC_CR_PLLSAI2RDY) != 0U) + +#elif defined(RCC_PLLSAI1_SUPPORT) + + while(READ_BIT(RCC->CR, RCC_CR_PLLRDY | RCC_CR_PLLSAI1RDY) != 0U) + +#else + + while(READ_BIT(RCC->CR, RCC_CR_PLLRDY) != 0U) + +#endif + { + if((HAL_GetTick() - tickstart) > PLL_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + + /* Reset PLLCFGR register */ + CLEAR_REG(RCC->PLLCFGR); + SET_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLN_4 ); + +#if defined(RCC_PLLSAI1_SUPPORT) + + /* Reset PLLSAI1CFGR register */ + CLEAR_REG(RCC->PLLSAI1CFGR); + SET_BIT(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1N_4 ); + +#endif /* RCC_PLLSAI1_SUPPORT */ + +#if defined(RCC_PLLSAI2_SUPPORT) + + /* Reset PLLSAI2CFGR register */ + CLEAR_REG(RCC->PLLSAI2CFGR); + SET_BIT(RCC->PLLSAI2CFGR, RCC_PLLSAI2CFGR_PLLSAI2N_4 ); + +#endif /* RCC_PLLSAI2_SUPPORT */ + + /* Reset HSEBYP bit */ + CLEAR_BIT(RCC->CR, RCC_CR_HSEBYP); + + /* Disable all interrupts */ + CLEAR_REG(RCC->CIER); + + /* Clear all interrupt flags */ + WRITE_REG(RCC->CICR, 0xFFFFFFFFU); + + /* Clear all reset flags */ + SET_BIT(RCC->CSR, RCC_CSR_RMVF); + + return HAL_OK; +} + +/** + * @brief Initialize the RCC Oscillators according to the specified parameters in the + * RCC_OscInitTypeDef. + * @param RCC_OscInitStruct pointer to an RCC_OscInitTypeDef structure that + * contains the configuration information for the RCC Oscillators. + * @note The PLL is not disabled when used as system clock. + * @note The PLL source is not updated when used as PLLSAI(s) clock source. + * @note Transitions LSE Bypass to LSE On and LSE On to LSE Bypass are not + * supported by this macro. User should request a transition to LSE Off + * first and then LSE On or LSE Bypass. + * @note Transition HSE Bypass to HSE On and HSE On to HSE Bypass are not + * supported by this macro. User should request a transition to HSE Off + * first and then HSE On or HSE Bypass. + * @note If HSE failed to start, HSE should be disabled before recalling + HAL_RCC_OscConfig(). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RCC_OscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct) +{ + uint32_t tickstart; + HAL_StatusTypeDef status; + uint32_t sysclk_source, pll_config; + + /* Check Null pointer */ + if(RCC_OscInitStruct == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_RCC_OSCILLATORTYPE(RCC_OscInitStruct->OscillatorType)); + + sysclk_source = __HAL_RCC_GET_SYSCLK_SOURCE(); + pll_config = __HAL_RCC_GET_PLL_OSCSOURCE(); + + /*----------------------------- MSI Configuration --------------------------*/ + if(((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_MSI) == RCC_OSCILLATORTYPE_MSI) + { + /* Check the parameters */ + assert_param(IS_RCC_MSI(RCC_OscInitStruct->MSIState)); + assert_param(IS_RCC_MSICALIBRATION_VALUE(RCC_OscInitStruct->MSICalibrationValue)); + assert_param(IS_RCC_MSI_CLOCK_RANGE(RCC_OscInitStruct->MSIClockRange)); + + /* Check if MSI is used as system clock or as PLL source when PLL is selected as system clock */ + if((sysclk_source == RCC_CFGR_SWS_MSI) || + ((sysclk_source == RCC_CFGR_SWS_PLL) && (pll_config == RCC_PLLSOURCE_MSI))) + { + if((READ_BIT(RCC->CR, RCC_CR_MSIRDY) != 0U) && (RCC_OscInitStruct->MSIState == RCC_MSI_OFF)) + { + return HAL_ERROR; + } + + /* Otherwise, just the calibration and MSI range change are allowed */ + else + { + /* To correctly read data from FLASH memory, the number of wait states (LATENCY) + must be correctly programmed according to the frequency of the CPU clock + (HCLK) and the supply voltage of the device. */ + if(RCC_OscInitStruct->MSIClockRange > __HAL_RCC_GET_MSI_RANGE()) + { + /* First increase number of wait states update if necessary */ + if(RCC_SetFlashLatencyFromMSIRange(RCC_OscInitStruct->MSIClockRange) != HAL_OK) + { + return HAL_ERROR; + } + + /* Selects the Multiple Speed oscillator (MSI) clock range .*/ + __HAL_RCC_MSI_RANGE_CONFIG(RCC_OscInitStruct->MSIClockRange); + /* Adjusts the Multiple Speed oscillator (MSI) calibration value.*/ + __HAL_RCC_MSI_CALIBRATIONVALUE_ADJUST(RCC_OscInitStruct->MSICalibrationValue); + } + else + { + /* Else, keep current flash latency while decreasing applies */ + /* Selects the Multiple Speed oscillator (MSI) clock range .*/ + __HAL_RCC_MSI_RANGE_CONFIG(RCC_OscInitStruct->MSIClockRange); + /* Adjusts the Multiple Speed oscillator (MSI) calibration value.*/ + __HAL_RCC_MSI_CALIBRATIONVALUE_ADJUST(RCC_OscInitStruct->MSICalibrationValue); + + /* Decrease number of wait states update if necessary */ + /* Only possible when MSI is the System clock source */ + if(sysclk_source == RCC_CFGR_SWS_MSI) + { + if(RCC_SetFlashLatencyFromMSIRange(RCC_OscInitStruct->MSIClockRange) != HAL_OK) + { + return HAL_ERROR; + } + } + } + + /* Update the SystemCoreClock global variable */ + SystemCoreClock = HAL_RCC_GetSysClockFreq() >> (AHBPrescTable[READ_BIT(RCC->CFGR, RCC_CFGR_HPRE) >> RCC_CFGR_HPRE_Pos] & 0x1FU); + + /* Configure the source of time base considering new system clocks settings*/ + status = HAL_InitTick(uwTickPrio); + if(status != HAL_OK) + { + return status; + } + } + } + else + { + /* Check the MSI State */ + if(RCC_OscInitStruct->MSIState != RCC_MSI_OFF) + { + /* Enable the Internal High Speed oscillator (MSI). */ + __HAL_RCC_MSI_ENABLE(); + + /* Get timeout */ + tickstart = HAL_GetTick(); + + /* Wait till MSI is ready */ + while(READ_BIT(RCC->CR, RCC_CR_MSIRDY) == 0U) + { + if((HAL_GetTick() - tickstart) > MSI_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + /* Selects the Multiple Speed oscillator (MSI) clock range .*/ + __HAL_RCC_MSI_RANGE_CONFIG(RCC_OscInitStruct->MSIClockRange); + /* Adjusts the Multiple Speed oscillator (MSI) calibration value.*/ + __HAL_RCC_MSI_CALIBRATIONVALUE_ADJUST(RCC_OscInitStruct->MSICalibrationValue); + + } + else + { + /* Disable the Internal High Speed oscillator (MSI). */ + __HAL_RCC_MSI_DISABLE(); + + /* Get timeout */ + tickstart = HAL_GetTick(); + + /* Wait till MSI is ready */ + while(READ_BIT(RCC->CR, RCC_CR_MSIRDY) != 0U) + { + if((HAL_GetTick() - tickstart) > MSI_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + } + } + /*------------------------------- HSE Configuration ------------------------*/ + if(((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_HSE) == RCC_OSCILLATORTYPE_HSE) + { + /* Check the parameters */ + assert_param(IS_RCC_HSE(RCC_OscInitStruct->HSEState)); + + /* When the HSE is used as system clock or clock source for PLL in these cases it is not allowed to be disabled */ + if((sysclk_source == RCC_CFGR_SWS_HSE) || + ((sysclk_source == RCC_CFGR_SWS_PLL) && (pll_config == RCC_PLLSOURCE_HSE))) + { + if((READ_BIT(RCC->CR, RCC_CR_HSERDY) != 0U) && (RCC_OscInitStruct->HSEState == RCC_HSE_OFF)) + { + return HAL_ERROR; + } + } + else + { + /* Set the new HSE configuration ---------------------------------------*/ + __HAL_RCC_HSE_CONFIG(RCC_OscInitStruct->HSEState); + + /* Check the HSE State */ + if(RCC_OscInitStruct->HSEState != RCC_HSE_OFF) + { + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till HSE is ready */ + while(READ_BIT(RCC->CR, RCC_CR_HSERDY) == 0U) + { + if((HAL_GetTick() - tickstart) > HSE_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + else + { + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till HSE is disabled */ + while(READ_BIT(RCC->CR, RCC_CR_HSERDY) != 0U) + { + if((HAL_GetTick() - tickstart) > HSE_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + } + } + /*----------------------------- HSI Configuration --------------------------*/ + if(((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_HSI) == RCC_OSCILLATORTYPE_HSI) + { + /* Check the parameters */ + assert_param(IS_RCC_HSI(RCC_OscInitStruct->HSIState)); + assert_param(IS_RCC_HSI_CALIBRATION_VALUE(RCC_OscInitStruct->HSICalibrationValue)); + + /* Check if HSI is used as system clock or as PLL source when PLL is selected as system clock */ + if((sysclk_source == RCC_CFGR_SWS_HSI) || + ((sysclk_source == RCC_CFGR_SWS_PLL) && (pll_config == RCC_PLLSOURCE_HSI))) + { + /* When HSI is used as system clock it will not be disabled */ + if((READ_BIT(RCC->CR, RCC_CR_HSIRDY) != 0U) && (RCC_OscInitStruct->HSIState == RCC_HSI_OFF)) + { + return HAL_ERROR; + } + /* Otherwise, just the calibration is allowed */ + else + { + /* Adjusts the Internal High Speed oscillator (HSI) calibration value.*/ + __HAL_RCC_HSI_CALIBRATIONVALUE_ADJUST(RCC_OscInitStruct->HSICalibrationValue); + } + } + else + { + /* Check the HSI State */ + if(RCC_OscInitStruct->HSIState != RCC_HSI_OFF) + { + /* Enable the Internal High Speed oscillator (HSI). */ + __HAL_RCC_HSI_ENABLE(); + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till HSI is ready */ + while(READ_BIT(RCC->CR, RCC_CR_HSIRDY) == 0U) + { + if((HAL_GetTick() - tickstart) > HSI_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + + /* Adjusts the Internal High Speed oscillator (HSI) calibration value.*/ + __HAL_RCC_HSI_CALIBRATIONVALUE_ADJUST(RCC_OscInitStruct->HSICalibrationValue); + } + else + { + /* Disable the Internal High Speed oscillator (HSI). */ + __HAL_RCC_HSI_DISABLE(); + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till HSI is disabled */ + while(READ_BIT(RCC->CR, RCC_CR_HSIRDY) != 0U) + { + if((HAL_GetTick() - tickstart) > HSI_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + } + } + /*------------------------------ LSI Configuration -------------------------*/ + if(((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_LSI) == RCC_OSCILLATORTYPE_LSI) + { + /* Check the parameters */ + assert_param(IS_RCC_LSI(RCC_OscInitStruct->LSIState)); + + /* Check the LSI State */ + if(RCC_OscInitStruct->LSIState != RCC_LSI_OFF) + { +#if defined(RCC_CSR_LSIPREDIV) + uint32_t csr_temp = RCC->CSR; + + /* Check LSI division factor */ + assert_param(IS_RCC_LSIDIV(RCC_OscInitStruct->LSIDiv)); + + if (RCC_OscInitStruct->LSIDiv != (csr_temp & RCC_CSR_LSIPREDIV)) + { + if (((csr_temp & RCC_CSR_LSIRDY) == RCC_CSR_LSIRDY) && \ + ((csr_temp & RCC_CSR_LSION) != RCC_CSR_LSION)) + { + /* If LSIRDY is set while LSION is not enabled, + LSIPREDIV can't be updated */ + return HAL_ERROR; + } + + /* Turn off LSI before changing RCC_CSR_LSIPREDIV */ + if ((csr_temp & RCC_CSR_LSION) == RCC_CSR_LSION) + { + __HAL_RCC_LSI_DISABLE(); + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till LSI is disabled */ + while(READ_BIT(RCC->CSR, RCC_CSR_LSIRDY) != 0U) + { + if((HAL_GetTick() - tickstart) > LSI_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + + /* Set LSI division factor */ + MODIFY_REG(RCC->CSR, RCC_CSR_LSIPREDIV, RCC_OscInitStruct->LSIDiv); + } +#endif /* RCC_CSR_LSIPREDIV */ + + /* Enable the Internal Low Speed oscillator (LSI). */ + __HAL_RCC_LSI_ENABLE(); + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till LSI is ready */ + while(READ_BIT(RCC->CSR, RCC_CSR_LSIRDY) == 0U) + { + if((HAL_GetTick() - tickstart) > LSI_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + else + { + /* Disable the Internal Low Speed oscillator (LSI). */ + __HAL_RCC_LSI_DISABLE(); + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till LSI is disabled */ + while(READ_BIT(RCC->CSR, RCC_CSR_LSIRDY) != 0U) + { + if((HAL_GetTick() - tickstart) > LSI_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + } + /*------------------------------ LSE Configuration -------------------------*/ + if(((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_LSE) == RCC_OSCILLATORTYPE_LSE) + { + FlagStatus pwrclkchanged = RESET; + + /* Check the parameters */ + assert_param(IS_RCC_LSE(RCC_OscInitStruct->LSEState)); + + /* Update LSE configuration in Backup Domain control register */ + /* Requires to enable write access to Backup Domain of necessary */ + if(HAL_IS_BIT_CLR(RCC->APB1ENR1, RCC_APB1ENR1_PWREN)) + { + __HAL_RCC_PWR_CLK_ENABLE(); + pwrclkchanged = SET; + } + + if(HAL_IS_BIT_CLR(PWR->CR1, PWR_CR1_DBP)) + { + /* Enable write access to Backup domain */ + SET_BIT(PWR->CR1, PWR_CR1_DBP); + + /* Wait for Backup domain Write protection disable */ + tickstart = HAL_GetTick(); + + while(HAL_IS_BIT_CLR(PWR->CR1, PWR_CR1_DBP)) + { + if((HAL_GetTick() - tickstart) > RCC_DBP_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + + /* Set the new LSE configuration -----------------------------------------*/ +#if defined(RCC_BDCR_LSESYSDIS) + if((RCC_OscInitStruct->LSEState & RCC_BDCR_LSEON) != 0U) + { + /* Set LSESYSDIS bit according to LSE propagation option (enabled or disabled) */ + MODIFY_REG(RCC->BDCR, RCC_BDCR_LSESYSDIS, (RCC_OscInitStruct->LSEState & RCC_BDCR_LSESYSDIS)); + + if((RCC_OscInitStruct->LSEState & RCC_BDCR_LSEBYP) != 0U) + { + /* LSE oscillator bypass enable */ + SET_BIT(RCC->BDCR, RCC_BDCR_LSEBYP); + SET_BIT(RCC->BDCR, RCC_BDCR_LSEON); + } + else + { + /* LSE oscillator enable */ + SET_BIT(RCC->BDCR, RCC_BDCR_LSEON); + } + } + else + { + CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEON); + CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEBYP); + } +#else + __HAL_RCC_LSE_CONFIG(RCC_OscInitStruct->LSEState); +#endif /* RCC_BDCR_LSESYSDIS */ + + /* Check the LSE State */ + if(RCC_OscInitStruct->LSEState != RCC_LSE_OFF) + { + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till LSE is ready */ + while(READ_BIT(RCC->BDCR, RCC_BDCR_LSERDY) == 0U) + { + if((HAL_GetTick() - tickstart) > RCC_LSE_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + else + { + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till LSE is disabled */ + while(READ_BIT(RCC->BDCR, RCC_BDCR_LSERDY) != 0U) + { + if((HAL_GetTick() - tickstart) > RCC_LSE_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + +#if defined(RCC_BDCR_LSESYSDIS) + /* By default, stop disabling LSE propagation */ + CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSESYSDIS); +#endif /* RCC_BDCR_LSESYSDIS */ + } + + /* Restore clock configuration if changed */ + if(pwrclkchanged == SET) + { + __HAL_RCC_PWR_CLK_DISABLE(); + } + } +#if defined(RCC_HSI48_SUPPORT) + /*------------------------------ HSI48 Configuration -----------------------*/ + if(((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_HSI48) == RCC_OSCILLATORTYPE_HSI48) + { + /* Check the parameters */ + assert_param(IS_RCC_HSI48(RCC_OscInitStruct->HSI48State)); + + /* Check the LSI State */ + if(RCC_OscInitStruct->HSI48State != RCC_HSI48_OFF) + { + /* Enable the Internal Low Speed oscillator (HSI48). */ + __HAL_RCC_HSI48_ENABLE(); + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till HSI48 is ready */ + while(READ_BIT(RCC->CRRCR, RCC_CRRCR_HSI48RDY) == 0U) + { + if((HAL_GetTick() - tickstart) > HSI48_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + else + { + /* Disable the Internal Low Speed oscillator (HSI48). */ + __HAL_RCC_HSI48_DISABLE(); + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till HSI48 is disabled */ + while(READ_BIT(RCC->CRRCR, RCC_CRRCR_HSI48RDY) != 0U) + { + if((HAL_GetTick() - tickstart) > HSI48_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + } +#endif /* RCC_HSI48_SUPPORT */ + /*-------------------------------- PLL Configuration -----------------------*/ + /* Check the parameters */ + assert_param(IS_RCC_PLL(RCC_OscInitStruct->PLL.PLLState)); + + if(RCC_OscInitStruct->PLL.PLLState != RCC_PLL_NONE) + { + /* PLL On ? */ + if(RCC_OscInitStruct->PLL.PLLState == RCC_PLL_ON) + { + /* Check the parameters */ + assert_param(IS_RCC_PLLSOURCE(RCC_OscInitStruct->PLL.PLLSource)); + assert_param(IS_RCC_PLLM_VALUE(RCC_OscInitStruct->PLL.PLLM)); + assert_param(IS_RCC_PLLN_VALUE(RCC_OscInitStruct->PLL.PLLN)); +#if defined(RCC_PLLP_SUPPORT) + assert_param(IS_RCC_PLLP_VALUE(RCC_OscInitStruct->PLL.PLLP)); +#endif /* RCC_PLLP_SUPPORT */ + assert_param(IS_RCC_PLLQ_VALUE(RCC_OscInitStruct->PLL.PLLQ)); + assert_param(IS_RCC_PLLR_VALUE(RCC_OscInitStruct->PLL.PLLR)); + + /* Do nothing if PLL configuration is the unchanged */ + pll_config = RCC->PLLCFGR; + if((READ_BIT(pll_config, RCC_PLLCFGR_PLLSRC) != RCC_OscInitStruct->PLL.PLLSource) || + (READ_BIT(pll_config, RCC_PLLCFGR_PLLM) != ((RCC_OscInitStruct->PLL.PLLM - 1U) << RCC_PLLCFGR_PLLM_Pos)) || + (READ_BIT(pll_config, RCC_PLLCFGR_PLLN) != (RCC_OscInitStruct->PLL.PLLN << RCC_PLLCFGR_PLLN_Pos)) || +#if defined(RCC_PLLP_SUPPORT) +#if defined(RCC_PLLP_DIV_2_31_SUPPORT) + (READ_BIT(pll_config, RCC_PLLCFGR_PLLPDIV) != (RCC_OscInitStruct->PLL.PLLP << RCC_PLLCFGR_PLLPDIV_Pos)) || +#else + (READ_BIT(pll_config, RCC_PLLCFGR_PLLP) != ((RCC_OscInitStruct->PLL.PLLP == RCC_PLLP_DIV7) ? 0U : 1U)) || +#endif +#endif + (READ_BIT(pll_config, RCC_PLLCFGR_PLLQ) != ((((RCC_OscInitStruct->PLL.PLLQ) >> 1U) - 1U) << RCC_PLLCFGR_PLLQ_Pos)) || + (READ_BIT(pll_config, RCC_PLLCFGR_PLLR) != ((((RCC_OscInitStruct->PLL.PLLR) >> 1U) - 1U) << RCC_PLLCFGR_PLLR_Pos))) + { + /* Check if the PLL is used as system clock or not */ + if(sysclk_source != RCC_CFGR_SWS_PLL) + { +#if defined(RCC_PLLSAI1_SUPPORT) || defined(RCC_PLLSAI2_SUPPORT) + /* Check if main PLL can be updated */ + /* Not possible if the source is shared by other enabled PLLSAIx */ + if((READ_BIT(RCC->CR, RCC_CR_PLLSAI1ON) != 0U) +#if defined(RCC_PLLSAI2_SUPPORT) + || (READ_BIT(RCC->CR, RCC_CR_PLLSAI2ON) != 0U) +#endif + ) + { + return HAL_ERROR; + } + else +#endif /* RCC_PLLSAI1_SUPPORT || RCC_PLLSAI2_SUPPORT */ + { + /* Disable the main PLL. */ + __HAL_RCC_PLL_DISABLE(); + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till PLL is ready */ + while(READ_BIT(RCC->CR, RCC_CR_PLLRDY) != 0U) + { + if((HAL_GetTick() - tickstart) > PLL_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + + /* Configure the main PLL clock source, multiplication and division factors. */ +#if defined(RCC_PLLP_SUPPORT) + __HAL_RCC_PLL_CONFIG(RCC_OscInitStruct->PLL.PLLSource, + RCC_OscInitStruct->PLL.PLLM, + RCC_OscInitStruct->PLL.PLLN, + RCC_OscInitStruct->PLL.PLLP, + RCC_OscInitStruct->PLL.PLLQ, + RCC_OscInitStruct->PLL.PLLR); +#else + __HAL_RCC_PLL_CONFIG(RCC_OscInitStruct->PLL.PLLSource, + RCC_OscInitStruct->PLL.PLLM, + RCC_OscInitStruct->PLL.PLLN, + RCC_OscInitStruct->PLL.PLLQ, + RCC_OscInitStruct->PLL.PLLR); +#endif + + /* Enable the main PLL. */ + __HAL_RCC_PLL_ENABLE(); + + /* Enable PLL System Clock output. */ + __HAL_RCC_PLLCLKOUT_ENABLE(RCC_PLL_SYSCLK); + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till PLL is ready */ + while(READ_BIT(RCC->CR, RCC_CR_PLLRDY) == 0U) + { + if((HAL_GetTick() - tickstart) > PLL_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + } + else + { + /* PLL is already used as System core clock */ + return HAL_ERROR; + } + } + else + { + /* PLL configuration is unchanged */ + /* Re-enable PLL if it was disabled (ie. low power mode) */ + if(READ_BIT(RCC->CR, RCC_CR_PLLRDY) == 0U) + { + /* Enable the main PLL. */ + __HAL_RCC_PLL_ENABLE(); + + /* Enable PLL System Clock output. */ + __HAL_RCC_PLLCLKOUT_ENABLE(RCC_PLL_SYSCLK); + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till PLL is ready */ + while(READ_BIT(RCC->CR, RCC_CR_PLLRDY) == 0U) + { + if((HAL_GetTick() - tickstart) > PLL_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + } + } + else + { + /* Check that PLL is not used as system clock or not */ + if(sysclk_source != RCC_CFGR_SWS_PLL) + { + /* Disable the main PLL. */ + __HAL_RCC_PLL_DISABLE(); + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till PLL is disabled */ + while(READ_BIT(RCC->CR, RCC_CR_PLLRDY) != 0U) + { + if((HAL_GetTick() - tickstart) > PLL_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + /* Unselect main PLL clock source and disable main PLL outputs to save power */ +#if defined(RCC_PLLSAI2_SUPPORT) + RCC->PLLCFGR &= ~(RCC_PLLCFGR_PLLSRC | RCC_PLL_SYSCLK | RCC_PLL_48M1CLK | RCC_PLL_SAI3CLK); +#elif defined(RCC_PLLSAI1_SUPPORT) + RCC->PLLCFGR &= ~(RCC_PLLCFGR_PLLSRC | RCC_PLL_SYSCLK | RCC_PLL_48M1CLK | RCC_PLL_SAI2CLK); +#else + RCC->PLLCFGR &= ~(RCC_PLLCFGR_PLLSRC | RCC_PLL_SYSCLK | RCC_PLL_48M1CLK); +#endif /* RCC_PLLSAI2_SUPPORT */ + } + else + { + /* PLL is already used as System core clock */ + return HAL_ERROR; + } + } + } + return HAL_OK; +} + +/** + * @brief Initialize the CPU, AHB and APB busses clocks according to the specified + * parameters in the RCC_ClkInitStruct. + * @param RCC_ClkInitStruct pointer to an RCC_OscInitTypeDef structure that + * contains the configuration information for the RCC peripheral. + * @param FLatency FLASH Latency + * This parameter can be one of the following values: + * @arg FLASH_LATENCY_0 FLASH 0 Latency cycle + * @arg FLASH_LATENCY_1 FLASH 1 Latency cycle + * @arg FLASH_LATENCY_2 FLASH 2 Latency cycles + * @arg FLASH_LATENCY_3 FLASH 3 Latency cycles + * @arg FLASH_LATENCY_4 FLASH 4 Latency cycles + @if STM32L4S9xx + * @arg FLASH_LATENCY_5 FLASH 5 Latency cycles + * @arg FLASH_LATENCY_6 FLASH 6 Latency cycles + * @arg FLASH_LATENCY_7 FLASH 7 Latency cycles + * @arg FLASH_LATENCY_8 FLASH 8 Latency cycles + * @arg FLASH_LATENCY_9 FLASH 9 Latency cycles + * @arg FLASH_LATENCY_10 FLASH 10 Latency cycles + * @arg FLASH_LATENCY_11 FLASH 11 Latency cycles + * @arg FLASH_LATENCY_12 FLASH 12 Latency cycles + * @arg FLASH_LATENCY_13 FLASH 13 Latency cycles + * @arg FLASH_LATENCY_14 FLASH 14 Latency cycles + * @arg FLASH_LATENCY_15 FLASH 15 Latency cycles + @endif + * + * @note The SystemCoreClock CMSIS variable is used to store System Clock Frequency + * and updated by HAL_RCC_GetHCLKFreq() function called within this function + * + * @note The MSI is used by default as system clock source after + * startup from Reset, wake-up from STANDBY mode. After restart from Reset, + * the MSI frequency is set to its default value 4 MHz. + * + * @note The HSI can be selected as system clock source after + * from STOP modes or in case of failure of the HSE used directly or indirectly + * as system clock (if the Clock Security System CSS is enabled). + * + * @note A switch from one clock source to another occurs only if the target + * clock source is ready (clock stable after startup delay or PLL locked). + * If a clock source which is not yet ready is selected, the switch will + * occur when the clock source is ready. + * + * @note You can use HAL_RCC_GetClockConfig() function to know which clock is + * currently used as system clock source. + * + * @note Depending on the device voltage range, the software has to set correctly + * HPRE[3:0] bits to ensure that HCLK not exceed the maximum allowed frequency + * (for more details refer to section above "Initialization/de-initialization functions") + * @retval None + */ +HAL_StatusTypeDef HAL_RCC_ClockConfig(RCC_ClkInitTypeDef *RCC_ClkInitStruct, uint32_t FLatency) +{ + uint32_t tickstart; +#if defined(STM32L4P5xx) || defined(STM32L4Q5xx) || \ + defined(STM32L4R5xx) || defined(STM32L4R7xx) || defined(STM32L4R9xx) || defined(STM32L4S5xx) || defined(STM32L4S7xx) || defined(STM32L4S9xx) + uint32_t hpre = RCC_SYSCLK_DIV1; +#endif + HAL_StatusTypeDef status; + + /* Check Null pointer */ + if(RCC_ClkInitStruct == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_RCC_CLOCKTYPE(RCC_ClkInitStruct->ClockType)); + assert_param(IS_FLASH_LATENCY(FLatency)); + + /* To correctly read data from FLASH memory, the number of wait states (LATENCY) + must be correctly programmed according to the frequency of the CPU clock + (HCLK) and the supply voltage of the device. */ + + /* Increasing the number of wait states because of higher CPU frequency */ + if(FLatency > __HAL_FLASH_GET_LATENCY()) + { + /* Program the new number of wait states to the LATENCY bits in the FLASH_ACR register */ + __HAL_FLASH_SET_LATENCY(FLatency); + + /* Check that the new number of wait states is taken into account to access the Flash + memory by reading the FLASH_ACR register */ + if(__HAL_FLASH_GET_LATENCY() != FLatency) + { + return HAL_ERROR; + } + } + + /*----------------- HCLK Configuration prior to SYSCLK----------------------*/ + /* Apply higher HCLK prescaler request here to ensure CPU clock is not of of spec when SYSCLK is increased */ + if(((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_HCLK) == RCC_CLOCKTYPE_HCLK) + { + assert_param(IS_RCC_HCLK(RCC_ClkInitStruct->AHBCLKDivider)); + + if(RCC_ClkInitStruct->AHBCLKDivider > READ_BIT(RCC->CFGR, RCC_CFGR_HPRE)) + { + MODIFY_REG(RCC->CFGR, RCC_CFGR_HPRE, RCC_ClkInitStruct->AHBCLKDivider); + } + } + + /*------------------------- SYSCLK Configuration ---------------------------*/ + if(((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_SYSCLK) == RCC_CLOCKTYPE_SYSCLK) + { + assert_param(IS_RCC_SYSCLKSOURCE(RCC_ClkInitStruct->SYSCLKSource)); + + /* PLL is selected as System Clock Source */ + if(RCC_ClkInitStruct->SYSCLKSource == RCC_SYSCLKSOURCE_PLLCLK) + { + /* Check the PLL ready flag */ + if(READ_BIT(RCC->CR, RCC_CR_PLLRDY) == 0U) + { + return HAL_ERROR; + } +#if defined(STM32L4P5xx) || defined(STM32L4Q5xx) || \ + defined(STM32L4R5xx) || defined(STM32L4R7xx) || defined(STM32L4R9xx) || defined(STM32L4S5xx) || defined(STM32L4S7xx) || defined(STM32L4S9xx) + /* Undershoot management when selection PLL as SYSCLK source and frequency above 80Mhz */ + /* Compute target PLL output frequency */ + if(RCC_GetSysClockFreqFromPLLSource() > 80000000U) + { + /* If lowest HCLK prescaler, apply intermediate step with HCLK prescaler 2 necessary before to go over 80Mhz */ + if(READ_BIT(RCC->CFGR, RCC_CFGR_HPRE) == RCC_SYSCLK_DIV1) + { + MODIFY_REG(RCC->CFGR, RCC_CFGR_HPRE, RCC_SYSCLK_DIV2); + hpre = RCC_SYSCLK_DIV2; + } + } +#endif + } + else + { + /* HSE is selected as System Clock Source */ + if(RCC_ClkInitStruct->SYSCLKSource == RCC_SYSCLKSOURCE_HSE) + { + /* Check the HSE ready flag */ + if(READ_BIT(RCC->CR, RCC_CR_HSERDY) == 0U) + { + return HAL_ERROR; + } + } + /* MSI is selected as System Clock Source */ + else if(RCC_ClkInitStruct->SYSCLKSource == RCC_SYSCLKSOURCE_MSI) + { + /* Check the MSI ready flag */ + if(READ_BIT(RCC->CR, RCC_CR_MSIRDY) == 0U) + { + return HAL_ERROR; + } + } + /* HSI is selected as System Clock Source */ + else + { + /* Check the HSI ready flag */ + if(READ_BIT(RCC->CR, RCC_CR_HSIRDY) == 0U) + { + return HAL_ERROR; + } + } +#if defined(STM32L4P5xx) || defined(STM32L4Q5xx) || \ + defined(STM32L4R5xx) || defined(STM32L4R7xx) || defined(STM32L4R9xx) || defined(STM32L4S5xx) || defined(STM32L4S7xx) || defined(STM32L4S9xx) + /* Overshoot management when going down from PLL as SYSCLK source and frequency above 80Mhz */ + if(HAL_RCC_GetSysClockFreq() > 80000000U) + { + /* If lowest HCLK prescaler, apply intermediate step with HCLK prescaler 2 necessary before to go under 80Mhz */ + if(READ_BIT(RCC->CFGR, RCC_CFGR_HPRE) == RCC_SYSCLK_DIV1) + { + MODIFY_REG(RCC->CFGR, RCC_CFGR_HPRE, RCC_SYSCLK_DIV2); + hpre = RCC_SYSCLK_DIV2; + } + } +#endif + + } + + MODIFY_REG(RCC->CFGR, RCC_CFGR_SW, RCC_ClkInitStruct->SYSCLKSource); + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + while(__HAL_RCC_GET_SYSCLK_SOURCE() != (RCC_ClkInitStruct->SYSCLKSource << RCC_CFGR_SWS_Pos)) + { + if((HAL_GetTick() - tickstart) > CLOCKSWITCH_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + +#if defined(STM32L4P5xx) || defined(STM32L4Q5xx) || \ + defined(STM32L4R5xx) || defined(STM32L4R7xx) || defined(STM32L4R9xx) || defined(STM32L4S5xx) || defined(STM32L4S7xx) || defined(STM32L4S9xx) + /* Is intermediate HCLK prescaler 2 applied internally, resume with HCLK prescaler 1 */ + if(hpre == RCC_SYSCLK_DIV2) + { + MODIFY_REG(RCC->CFGR, RCC_CFGR_HPRE, RCC_SYSCLK_DIV1); + } +#endif + + /*----------------- HCLK Configuration after SYSCLK-------------------------*/ + /* Apply lower HCLK prescaler request here to ensure CPU clock is not of of spec when SYSCLK is set */ + if(((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_HCLK) == RCC_CLOCKTYPE_HCLK) + { + if(RCC_ClkInitStruct->AHBCLKDivider < READ_BIT(RCC->CFGR, RCC_CFGR_HPRE)) + { + MODIFY_REG(RCC->CFGR, RCC_CFGR_HPRE, RCC_ClkInitStruct->AHBCLKDivider); + } + } + + /* Allow decreasing of the number of wait states (because of lower CPU frequency expected) */ + if(FLatency < __HAL_FLASH_GET_LATENCY()) + { + /* Program the new number of wait states to the LATENCY bits in the FLASH_ACR register */ + __HAL_FLASH_SET_LATENCY(FLatency); + + /* Check that the new number of wait states is taken into account to access the Flash + memory by reading the FLASH_ACR register */ + if(__HAL_FLASH_GET_LATENCY() != FLatency) + { + return HAL_ERROR; + } + } + + /*-------------------------- PCLK1 Configuration ---------------------------*/ + if(((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_PCLK1) == RCC_CLOCKTYPE_PCLK1) + { + assert_param(IS_RCC_PCLK(RCC_ClkInitStruct->APB1CLKDivider)); + MODIFY_REG(RCC->CFGR, RCC_CFGR_PPRE1, RCC_ClkInitStruct->APB1CLKDivider); + } + + /*-------------------------- PCLK2 Configuration ---------------------------*/ + if(((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_PCLK2) == RCC_CLOCKTYPE_PCLK2) + { + assert_param(IS_RCC_PCLK(RCC_ClkInitStruct->APB2CLKDivider)); + MODIFY_REG(RCC->CFGR, RCC_CFGR_PPRE2, ((RCC_ClkInitStruct->APB2CLKDivider) << 3U)); + } + + /* Update the SystemCoreClock global variable */ + SystemCoreClock = HAL_RCC_GetSysClockFreq() >> (AHBPrescTable[READ_BIT(RCC->CFGR, RCC_CFGR_HPRE) >> RCC_CFGR_HPRE_Pos] & 0x1FU); + + /* Configure the source of time base considering new system clocks settings*/ + status = HAL_InitTick(uwTickPrio); + + return status; +} + +/** + * @} + */ + +/** @defgroup RCC_Exported_Functions_Group2 Peripheral Control functions + * @brief RCC clocks control functions + * +@verbatim + =============================================================================== + ##### Peripheral Control functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to: + + (+) Output clock to MCO pin. + (+) Retrieve current clock frequencies. + (+) Enable the Clock Security System. + +@endverbatim + * @{ + */ + +/** + * @brief Select the clock source to output on MCO pin(PA8). + * @note PA8 should be configured in alternate function mode. + * @param RCC_MCOx specifies the output direction for the clock source. + * For STM32L4xx family this parameter can have only one value: + * @arg @ref RCC_MCO1 Clock source to output on MCO1 pin(PA8). + * @param RCC_MCOSource specifies the clock source to output. + * This parameter can be one of the following values: + * @arg @ref RCC_MCO1SOURCE_NOCLOCK MCO output disabled, no clock on MCO + * @arg @ref RCC_MCO1SOURCE_SYSCLK system clock selected as MCO source + * @arg @ref RCC_MCO1SOURCE_MSI MSI clock selected as MCO source + * @arg @ref RCC_MCO1SOURCE_HSI HSI clock selected as MCO source + * @arg @ref RCC_MCO1SOURCE_HSE HSE clock selected as MCO source + * @arg @ref RCC_MCO1SOURCE_PLLCLK main PLL clock selected as MCO source + * @arg @ref RCC_MCO1SOURCE_LSI LSI clock selected as MCO source + * @arg @ref RCC_MCO1SOURCE_LSE LSE clock selected as MCO source + @if STM32L443xx + * @arg @ref RCC_MCO1SOURCE_HSI48 HSI48 clock selected as MCO source for devices with HSI48 + @endif + * @param RCC_MCODiv specifies the MCO prescaler. + * This parameter can be one of the following values: + * @arg @ref RCC_MCODIV_1 no division applied to MCO clock + * @arg @ref RCC_MCODIV_2 division by 2 applied to MCO clock + * @arg @ref RCC_MCODIV_4 division by 4 applied to MCO clock + * @arg @ref RCC_MCODIV_8 division by 8 applied to MCO clock + * @arg @ref RCC_MCODIV_16 division by 16 applied to MCO clock + * @retval None + */ +void HAL_RCC_MCOConfig( uint32_t RCC_MCOx, uint32_t RCC_MCOSource, uint32_t RCC_MCODiv) +{ + GPIO_InitTypeDef GPIO_InitStruct; + + /* Check the parameters */ + assert_param(IS_RCC_MCO(RCC_MCOx)); + assert_param(IS_RCC_MCODIV(RCC_MCODiv)); + assert_param(IS_RCC_MCO1SOURCE(RCC_MCOSource)); + + /* Prevent unused argument(s) compilation warning if no assert_param check */ + UNUSED(RCC_MCOx); + + /* MCO Clock Enable */ + __MCO1_CLK_ENABLE(); + + /* Configure the MCO1 pin in alternate function mode */ + GPIO_InitStruct.Pin = MCO1_PIN; + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Alternate = GPIO_AF0_MCO; + HAL_GPIO_Init(MCO1_GPIO_PORT, &GPIO_InitStruct); + + /* Mask MCOSEL[] and MCOPRE[] bits then set MCO1 clock source and prescaler */ + MODIFY_REG(RCC->CFGR, (RCC_CFGR_MCOSEL | RCC_CFGR_MCOPRE), (RCC_MCOSource | RCC_MCODiv )); +} + +/** + * @brief Return the SYSCLK frequency. + * + * @note The system frequency computed by this function is not the real + * frequency in the chip. It is calculated based on the predefined + * constant and the selected clock source: + * @note If SYSCLK source is MSI, function returns values based on MSI + * Value as defined by the MSI range. + * @note If SYSCLK source is HSI, function returns values based on HSI_VALUE(*) + * @note If SYSCLK source is HSE, function returns values based on HSE_VALUE(**) + * @note If SYSCLK source is PLL, function returns values based on HSE_VALUE(**), + * HSI_VALUE(*) or MSI Value multiplied/divided by the PLL factors. + * @note (*) HSI_VALUE is a constant defined in stm32l4xx_hal_conf.h file (default value + * 16 MHz) but the real value may vary depending on the variations + * in voltage and temperature. + * @note (**) HSE_VALUE is a constant defined in stm32l4xx_hal_conf.h file (default value + * 8 MHz), user has to ensure that HSE_VALUE is same as the real + * frequency of the crystal used. Otherwise, this function may + * have wrong result. + * + * @note The result of this function could be not correct when using fractional + * value for HSE crystal. + * + * @note This function can be used by the user application to compute the + * baudrate for the communication peripherals or configure other parameters. + * + * @note Each time SYSCLK changes, this function must be called to update the + * right SYSCLK value. Otherwise, any configuration based on this function will be incorrect. + * + * + * @retval SYSCLK frequency + */ +uint32_t HAL_RCC_GetSysClockFreq(void) +{ + uint32_t msirange = 0U, sysclockfreq = 0U; + uint32_t pllvco, pllsource, pllr, pllm; /* no init needed */ + uint32_t sysclk_source, pll_oscsource; + + sysclk_source = __HAL_RCC_GET_SYSCLK_SOURCE(); + pll_oscsource = __HAL_RCC_GET_PLL_OSCSOURCE(); + + if((sysclk_source == RCC_CFGR_SWS_MSI) || + ((sysclk_source == RCC_CFGR_SWS_PLL) && (pll_oscsource == RCC_PLLSOURCE_MSI))) + { + /* MSI or PLL with MSI source used as system clock source */ + + /* Get SYSCLK source */ + if(READ_BIT(RCC->CR, RCC_CR_MSIRGSEL) == 0U) + { /* MSISRANGE from RCC_CSR applies */ + msirange = READ_BIT(RCC->CSR, RCC_CSR_MSISRANGE) >> RCC_CSR_MSISRANGE_Pos; + } + else + { /* MSIRANGE from RCC_CR applies */ + msirange = READ_BIT(RCC->CR, RCC_CR_MSIRANGE) >> RCC_CR_MSIRANGE_Pos; + } + /*MSI frequency range in HZ*/ + msirange = MSIRangeTable[msirange]; + + if(sysclk_source == RCC_CFGR_SWS_MSI) + { + /* MSI used as system clock source */ + sysclockfreq = msirange; + } + } + else if(sysclk_source == RCC_CFGR_SWS_HSI) + { + /* HSI used as system clock source */ + sysclockfreq = HSI_VALUE; + } + else if(sysclk_source == RCC_CFGR_SWS_HSE) + { + /* HSE used as system clock source */ + sysclockfreq = HSE_VALUE; + } + else + { + /* unexpected case: sysclockfreq at 0 */ + } + + if(sysclk_source == RCC_CFGR_SWS_PLL) + { + /* PLL used as system clock source */ + + /* PLL_VCO = (HSE_VALUE or HSI_VALUE or MSI_VALUE) * PLLN / PLLM + SYSCLK = PLL_VCO / PLLR + */ + pllsource = READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC); + + switch (pllsource) + { + case RCC_PLLSOURCE_HSI: /* HSI used as PLL clock source */ + pllvco = HSI_VALUE; + break; + + case RCC_PLLSOURCE_HSE: /* HSE used as PLL clock source */ + pllvco = HSE_VALUE; + break; + + case RCC_PLLSOURCE_MSI: /* MSI used as PLL clock source */ + default: + pllvco = msirange; + break; + } + pllm = (READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLM) >> RCC_PLLCFGR_PLLM_Pos) + 1U ; + pllvco = (pllvco * (READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLN) >> RCC_PLLCFGR_PLLN_Pos)) / pllm; + pllr = ((READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLR) >> RCC_PLLCFGR_PLLR_Pos) + 1U ) * 2U; + sysclockfreq = pllvco / pllr; + } + + return sysclockfreq; +} + +/** + * @brief Return the HCLK frequency. + * @note Each time HCLK changes, this function must be called to update the + * right HCLK value. Otherwise, any configuration based on this function will be incorrect. + * + * @note The SystemCoreClock CMSIS variable is used to store System Clock Frequency. + * @retval HCLK frequency in Hz + */ +uint32_t HAL_RCC_GetHCLKFreq(void) +{ + return SystemCoreClock; +} + +/** + * @brief Return the PCLK1 frequency. + * @note Each time PCLK1 changes, this function must be called to update the + * right PCLK1 value. Otherwise, any configuration based on this function will be incorrect. + * @retval PCLK1 frequency in Hz + */ +uint32_t HAL_RCC_GetPCLK1Freq(void) +{ + /* Get HCLK source and Compute PCLK1 frequency ---------------------------*/ + return (HAL_RCC_GetHCLKFreq() >> (APBPrescTable[READ_BIT(RCC->CFGR, RCC_CFGR_PPRE1) >> RCC_CFGR_PPRE1_Pos] & 0x1FU)); +} + +/** + * @brief Return the PCLK2 frequency. + * @note Each time PCLK2 changes, this function must be called to update the + * right PCLK2 value. Otherwise, any configuration based on this function will be incorrect. + * @retval PCLK2 frequency in Hz + */ +uint32_t HAL_RCC_GetPCLK2Freq(void) +{ + /* Get HCLK source and Compute PCLK2 frequency ---------------------------*/ + return (HAL_RCC_GetHCLKFreq()>> (APBPrescTable[READ_BIT(RCC->CFGR, RCC_CFGR_PPRE2) >> RCC_CFGR_PPRE2_Pos] & 0x1FU)); +} + +/** + * @brief Configure the RCC_OscInitStruct according to the internal + * RCC configuration registers. + * @param RCC_OscInitStruct pointer to an RCC_OscInitTypeDef structure that + * will be configured. + * @retval None + */ +void HAL_RCC_GetOscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct) +{ + /* Check the parameters */ + assert_param(RCC_OscInitStruct != (void *)NULL); + + /* Set all possible values for the Oscillator type parameter ---------------*/ +#if defined(RCC_HSI48_SUPPORT) + RCC_OscInitStruct->OscillatorType = RCC_OSCILLATORTYPE_HSE | RCC_OSCILLATORTYPE_HSI | RCC_OSCILLATORTYPE_MSI | \ + RCC_OSCILLATORTYPE_LSE | RCC_OSCILLATORTYPE_LSI | RCC_OSCILLATORTYPE_HSI48; +#else + RCC_OscInitStruct->OscillatorType = RCC_OSCILLATORTYPE_HSE | RCC_OSCILLATORTYPE_HSI | RCC_OSCILLATORTYPE_MSI | \ + RCC_OSCILLATORTYPE_LSE | RCC_OSCILLATORTYPE_LSI; +#endif /* RCC_HSI48_SUPPORT */ + + /* Get the HSE configuration -----------------------------------------------*/ + if(READ_BIT(RCC->CR, RCC_CR_HSEBYP) == RCC_CR_HSEBYP) + { + RCC_OscInitStruct->HSEState = RCC_HSE_BYPASS; + } + else if(READ_BIT(RCC->CR, RCC_CR_HSEON) == RCC_CR_HSEON) + { + RCC_OscInitStruct->HSEState = RCC_HSE_ON; + } + else + { + RCC_OscInitStruct->HSEState = RCC_HSE_OFF; + } + + /* Get the MSI configuration -----------------------------------------------*/ + if(READ_BIT(RCC->CR, RCC_CR_MSION) == RCC_CR_MSION) + { + RCC_OscInitStruct->MSIState = RCC_MSI_ON; + } + else + { + RCC_OscInitStruct->MSIState = RCC_MSI_OFF; + } + + RCC_OscInitStruct->MSICalibrationValue = READ_BIT(RCC->ICSCR, RCC_ICSCR_MSITRIM) >> RCC_ICSCR_MSITRIM_Pos; + RCC_OscInitStruct->MSIClockRange = READ_BIT(RCC->CR, RCC_CR_MSIRANGE); + + /* Get the HSI configuration -----------------------------------------------*/ + if(READ_BIT(RCC->CR, RCC_CR_HSION) == RCC_CR_HSION) + { + RCC_OscInitStruct->HSIState = RCC_HSI_ON; + } + else + { + RCC_OscInitStruct->HSIState = RCC_HSI_OFF; + } + + RCC_OscInitStruct->HSICalibrationValue = READ_BIT(RCC->ICSCR, RCC_ICSCR_HSITRIM) >> RCC_ICSCR_HSITRIM_Pos; + + /* Get the LSE configuration -----------------------------------------------*/ + if(READ_BIT(RCC->BDCR, RCC_BDCR_LSEBYP) == RCC_BDCR_LSEBYP) + { +#if defined(RCC_BDCR_LSESYSDIS) + if((RCC->BDCR & RCC_BDCR_LSESYSDIS) == RCC_BDCR_LSESYSDIS) + { + RCC_OscInitStruct->LSEState = RCC_LSE_BYPASS_RTC_ONLY; + } + else +#endif /* RCC_BDCR_LSESYSDIS */ + { + RCC_OscInitStruct->LSEState = RCC_LSE_BYPASS; + } + } + else if(READ_BIT(RCC->BDCR, RCC_BDCR_LSEON) == RCC_BDCR_LSEON) + { +#if defined(RCC_BDCR_LSESYSDIS) + if((RCC->BDCR & RCC_BDCR_LSESYSDIS) == RCC_BDCR_LSESYSDIS) + { + RCC_OscInitStruct->LSEState = RCC_LSE_ON_RTC_ONLY; + } + else +#endif /* RCC_BDCR_LSESYSDIS */ + { + RCC_OscInitStruct->LSEState = RCC_LSE_ON; + } + } + else + { + RCC_OscInitStruct->LSEState = RCC_LSE_OFF; + } + + /* Get the LSI configuration -----------------------------------------------*/ + if(READ_BIT(RCC->CSR, RCC_CSR_LSION) == RCC_CSR_LSION) + { + RCC_OscInitStruct->LSIState = RCC_LSI_ON; + } + else + { + RCC_OscInitStruct->LSIState = RCC_LSI_OFF; + } +#if defined(RCC_CSR_LSIPREDIV) + + /* Get the LSI configuration -----------------------------------------------*/ + if((RCC->CSR & RCC_CSR_LSIPREDIV) == RCC_CSR_LSIPREDIV) + { + RCC_OscInitStruct->LSIDiv = RCC_LSI_DIV128; + } + else + { + RCC_OscInitStruct->LSIDiv = RCC_LSI_DIV1; + } +#endif /* RCC_CSR_LSIPREDIV */ + +#if defined(RCC_HSI48_SUPPORT) + /* Get the HSI48 configuration ---------------------------------------------*/ + if(READ_BIT(RCC->CRRCR, RCC_CRRCR_HSI48ON) == RCC_CRRCR_HSI48ON) + { + RCC_OscInitStruct->HSI48State = RCC_HSI48_ON; + } + else + { + RCC_OscInitStruct->HSI48State = RCC_HSI48_OFF; + } +#else + RCC_OscInitStruct->HSI48State = RCC_HSI48_OFF; +#endif /* RCC_HSI48_SUPPORT */ + + /* Get the PLL configuration -----------------------------------------------*/ + if(READ_BIT(RCC->CR, RCC_CR_PLLON) == RCC_CR_PLLON) + { + RCC_OscInitStruct->PLL.PLLState = RCC_PLL_ON; + } + else + { + RCC_OscInitStruct->PLL.PLLState = RCC_PLL_OFF; + } + RCC_OscInitStruct->PLL.PLLSource = READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC); + RCC_OscInitStruct->PLL.PLLM = (READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLM) >> RCC_PLLCFGR_PLLM_Pos) + 1U; + RCC_OscInitStruct->PLL.PLLN = READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLN) >> RCC_PLLCFGR_PLLN_Pos; + RCC_OscInitStruct->PLL.PLLQ = (((READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLQ) >> RCC_PLLCFGR_PLLQ_Pos) + 1U) << 1U); + RCC_OscInitStruct->PLL.PLLR = (((READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLR) >> RCC_PLLCFGR_PLLR_Pos) + 1U) << 1U); +#if defined(RCC_PLLP_SUPPORT) +#if defined(RCC_PLLP_DIV_2_31_SUPPORT) + RCC_OscInitStruct->PLL.PLLP = READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLPDIV) >> RCC_PLLCFGR_PLLPDIV_Pos; +#else + if(READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLP) != 0U) + { + RCC_OscInitStruct->PLL.PLLP = RCC_PLLP_DIV17; + } + else + { + RCC_OscInitStruct->PLL.PLLP = RCC_PLLP_DIV7; + } +#endif /* RCC_PLLP_DIV_2_31_SUPPORT */ +#endif /* RCC_PLLP_SUPPORT */ +} + +/** + * @brief Configure the RCC_ClkInitStruct according to the internal + * RCC configuration registers. + * @param RCC_ClkInitStruct pointer to an RCC_ClkInitTypeDef structure that + * will be configured. + * @param pFLatency Pointer on the Flash Latency. + * @retval None + */ +void HAL_RCC_GetClockConfig(RCC_ClkInitTypeDef *RCC_ClkInitStruct, uint32_t *pFLatency) +{ + /* Check the parameters */ + assert_param(RCC_ClkInitStruct != (void *)NULL); + assert_param(pFLatency != (void *)NULL); + + /* Set all possible values for the Clock type parameter --------------------*/ + RCC_ClkInitStruct->ClockType = RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2; + + /* Get the SYSCLK configuration --------------------------------------------*/ + RCC_ClkInitStruct->SYSCLKSource = READ_BIT(RCC->CFGR, RCC_CFGR_SW); + + /* Get the HCLK configuration ----------------------------------------------*/ + RCC_ClkInitStruct->AHBCLKDivider = READ_BIT(RCC->CFGR, RCC_CFGR_HPRE); + + /* Get the APB1 configuration ----------------------------------------------*/ + RCC_ClkInitStruct->APB1CLKDivider = READ_BIT(RCC->CFGR, RCC_CFGR_PPRE1); + + /* Get the APB2 configuration ----------------------------------------------*/ + RCC_ClkInitStruct->APB2CLKDivider = (READ_BIT(RCC->CFGR, RCC_CFGR_PPRE2) >> 3U); + + /* Get the Flash Wait State (Latency) configuration ------------------------*/ + *pFLatency = __HAL_FLASH_GET_LATENCY(); +} + +/** + * @brief Enable the Clock Security System. + * @note If a failure is detected on the HSE oscillator clock, this oscillator + * is automatically disabled and an interrupt is generated to inform the + * software about the failure (Clock Security System Interrupt, CSSI), + * allowing the MCU to perform rescue operations. The CSSI is linked to + * the Cortex-M4 NMI (Non-Maskable Interrupt) exception vector. + * @note The Clock Security System can only be cleared by reset. + * @retval None + */ +void HAL_RCC_EnableCSS(void) +{ + SET_BIT(RCC->CR, RCC_CR_CSSON) ; +} + +/** + * @brief Handle the RCC Clock Security System interrupt request. + * @note This API should be called under the NMI_Handler(). + * @retval None + */ +void HAL_RCC_NMI_IRQHandler(void) +{ + /* Check RCC CSSF interrupt flag */ + if(__HAL_RCC_GET_IT(RCC_IT_CSS)) + { + /* RCC Clock Security System interrupt user callback */ + HAL_RCC_CSSCallback(); + + /* Clear RCC CSS pending bit */ + __HAL_RCC_CLEAR_IT(RCC_IT_CSS); + } +} + +/** + * @brief RCC Clock Security System interrupt callback. + * @retval none + */ +__weak void HAL_RCC_CSSCallback(void) +{ + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_RCC_CSSCallback should be implemented in the user file + */ +} + +/** + * @brief Get and clear reset flags + * @param None + * @note Once reset flags are retrieved, this API is clearing them in order + * to isolate next reset reason. + * @retval can be a combination of @ref RCC_Reset_Flag + */ +uint32_t HAL_RCC_GetResetSource(void) +{ + uint32_t reset; + + /* Get all reset flags */ + reset = RCC->CSR & RCC_RESET_FLAG_ALL; + + /* Clear Reset flags */ + RCC->CSR |= RCC_CSR_RMVF; + + return reset; +} + +/** * @} + */ + +/** + * @} + */ + +/* Private function prototypes -----------------------------------------------*/ +/** @addtogroup RCC_Private_Functions + * @{ + */ +/** + * @brief Update number of Flash wait states in line with MSI range and current + voltage range. + * @param msirange MSI range value from RCC_MSIRANGE_0 to RCC_MSIRANGE_11 + * @retval HAL status + */ +static HAL_StatusTypeDef RCC_SetFlashLatencyFromMSIRange(uint32_t msirange) +{ + uint32_t vos; + uint32_t latency = FLASH_LATENCY_0; /* default value 0WS */ + + if(__HAL_RCC_PWR_IS_CLK_ENABLED()) + { + vos = HAL_PWREx_GetVoltageRange(); + } + else + { + __HAL_RCC_PWR_CLK_ENABLE(); + vos = HAL_PWREx_GetVoltageRange(); + __HAL_RCC_PWR_CLK_DISABLE(); + } + + if(vos == PWR_REGULATOR_VOLTAGE_SCALE1) + { + if(msirange > RCC_MSIRANGE_8) + { + /* MSI > 16Mhz */ + if(msirange > RCC_MSIRANGE_10) + { + /* MSI 48Mhz */ + latency = FLASH_LATENCY_2; /* 2WS */ + } + else + { + /* MSI 24Mhz or 32Mhz */ + latency = FLASH_LATENCY_1; /* 1WS */ + } + } + /* else MSI <= 16Mhz default FLASH_LATENCY_0 0WS */ + } + else + { +#if defined(STM32L4P5xx) || defined(STM32L4Q5xx) || \ + defined(STM32L4R5xx) || defined(STM32L4R7xx) || defined(STM32L4R9xx) || defined(STM32L4S5xx) || defined(STM32L4S7xx) || defined(STM32L4S9xx) + if(msirange >= RCC_MSIRANGE_8) + { + /* MSI >= 16Mhz */ + latency = FLASH_LATENCY_2; /* 2WS */ + } + else + { + if(msirange == RCC_MSIRANGE_7) + { + /* MSI 8Mhz */ + latency = FLASH_LATENCY_1; /* 1WS */ + } + /* else MSI < 8Mhz default FLASH_LATENCY_0 0WS */ + } +#else + if(msirange > RCC_MSIRANGE_8) + { + /* MSI > 16Mhz */ + latency = FLASH_LATENCY_3; /* 3WS */ + } + else + { + if(msirange == RCC_MSIRANGE_8) + { + /* MSI 16Mhz */ + latency = FLASH_LATENCY_2; /* 2WS */ + } + else if(msirange == RCC_MSIRANGE_7) + { + /* MSI 8Mhz */ + latency = FLASH_LATENCY_1; /* 1WS */ + } + else + { + /* else MSI < 8Mhz default FLASH_LATENCY_0 0WS */ + /* nothing to do */ + } + } +#endif + } + + __HAL_FLASH_SET_LATENCY(latency); + + /* Check that the new number of wait states is taken into account to access the Flash + memory by reading the FLASH_ACR register */ + if(__HAL_FLASH_GET_LATENCY() != latency) + { + return HAL_ERROR; + } + + return HAL_OK; +} + +#if defined(STM32L4P5xx) || defined(STM32L4Q5xx) || \ + defined(STM32L4R5xx) || defined(STM32L4R7xx) || defined(STM32L4R9xx) || defined(STM32L4S5xx) || defined(STM32L4S7xx) || defined(STM32L4S9xx) +/** + * @brief Compute SYSCLK frequency based on PLL SYSCLK source. + * @retval SYSCLK frequency + */ +static uint32_t RCC_GetSysClockFreqFromPLLSource(void) +{ + uint32_t msirange, pllvco, pllsource, pllr, pllm, sysclockfreq; /* no init needed */ + + /* PLL_VCO = (HSE_VALUE or HSI_VALUE or MSI_VALUE) * PLLN / PLLM + SYSCLK = PLL_VCO / PLLR + */ + pllsource = READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC); + + switch (pllsource) + { + case RCC_PLLSOURCE_HSI: /* HSI used as PLL clock source */ + pllvco = HSI_VALUE; + break; + + case RCC_PLLSOURCE_HSE: /* HSE used as PLL clock source */ + pllvco = HSE_VALUE; + break; + + case RCC_PLLSOURCE_MSI: /* MSI used as PLL clock source */ + /* Get MSI range source */ + if(READ_BIT(RCC->CR, RCC_CR_MSIRGSEL) == 0U) + { /* MSISRANGE from RCC_CSR applies */ + msirange = READ_BIT(RCC->CSR, RCC_CSR_MSISRANGE) >> RCC_CSR_MSISRANGE_Pos; + } + else + { /* MSIRANGE from RCC_CR applies */ + msirange = READ_BIT(RCC->CR, RCC_CR_MSIRANGE) >> RCC_CR_MSIRANGE_Pos; + } + /*MSI frequency range in HZ*/ + pllvco = MSIRangeTable[msirange]; + break; + default: + /* unexpected */ + pllvco = 0; + break; + } + pllm = (READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLM) >> RCC_PLLCFGR_PLLM_Pos) + 1U ; + pllvco = (pllvco * (READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLN) >> RCC_PLLCFGR_PLLN_Pos)) / pllm; + pllr = ((READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLR) >> RCC_PLLCFGR_PLLR_Pos) + 1U ) * 2U; + sysclockfreq = pllvco / pllr; + + return sysclockfreq; +} +#endif + +/** + * @} + */ + +#endif /* HAL_RCC_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + diff --git a/CablePositioning_IAP_V1.0/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.c b/CablePositioning_IAP_V1.0/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.c index 4c66357..6ab96aa 100644 --- a/CablePositioning_IAP_V1.0/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.c +++ b/CablePositioning_IAP_V1.0/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.c @@ -1,3552 +1,3556 @@ -/** - ****************************************************************************** - * @file stm32l4xx_hal_rcc_ex.c - * @author MCD Application Team - * @brief Extended RCC HAL module driver. - * This file provides firmware functions to manage the following - * functionalities RCC extended peripheral: - * + Extended Peripheral Control functions - * + Extended Clock management functions - * + Extended Clock Recovery System Control functions - * - ****************************************************************************** - * @attention - * - * Copyright (c) 2017 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file in - * the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32l4xx_hal.h" - -/** @addtogroup STM32L4xx_HAL_Driver - * @{ - */ - -/** @defgroup RCCEx RCCEx - * @brief RCC Extended HAL module driver - * @{ - */ - -#ifdef HAL_RCC_MODULE_ENABLED - -/* Private typedef -----------------------------------------------------------*/ -/* Private defines -----------------------------------------------------------*/ -/** @defgroup RCCEx_Private_Constants RCCEx Private Constants - * @{ - */ -#define PLLSAI1_TIMEOUT_VALUE 2U /* 2 ms (minimum Tick + 1) */ -#define PLLSAI2_TIMEOUT_VALUE 2U /* 2 ms (minimum Tick + 1) */ -#define PLL_TIMEOUT_VALUE 2U /* 2 ms (minimum Tick + 1) */ - -#define DIVIDER_P_UPDATE 0U -#define DIVIDER_Q_UPDATE 1U -#define DIVIDER_R_UPDATE 2U - -#define __LSCO_CLK_ENABLE() __HAL_RCC_GPIOA_CLK_ENABLE() -#define LSCO_GPIO_PORT GPIOA -#define LSCO_PIN GPIO_PIN_2 -/** - * @} - */ - -/* Private macros ------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ -/** @defgroup RCCEx_Private_Functions RCCEx Private Functions - * @{ - */ -#if defined(RCC_PLLSAI1_SUPPORT) - -static HAL_StatusTypeDef RCCEx_PLLSAI1_Config(RCC_PLLSAI1InitTypeDef *PllSai1, uint32_t Divider); - -#endif /* RCC_PLLSAI1_SUPPORT */ - -#if defined(RCC_PLLSAI2_SUPPORT) - -static HAL_StatusTypeDef RCCEx_PLLSAI2_Config(RCC_PLLSAI2InitTypeDef *PllSai2, uint32_t Divider); - -#endif /* RCC_PLLSAI2_SUPPORT */ - -#if defined(SAI1) - -static uint32_t RCCEx_GetSAIxPeriphCLKFreq(uint32_t PeriphClk, uint32_t InputFrequency); - -#endif /* SAI1 */ -/** - * @} - */ - -/* Exported functions --------------------------------------------------------*/ - -/** @defgroup RCCEx_Exported_Functions RCCEx Exported Functions - * @{ - */ - -/** @defgroup RCCEx_Exported_Functions_Group1 Extended Peripheral Control functions - * @brief Extended Peripheral Control functions - * -@verbatim - =============================================================================== - ##### Extended Peripheral Control functions ##### - =============================================================================== - [..] - This subsection provides a set of functions allowing to control the RCC Clocks - frequencies. - [..] - (@) Important note: Care must be taken when HAL_RCCEx_PeriphCLKConfig() is used to - select the RTC clock source; in this case the Backup domain will be reset in - order to modify the RTC Clock source, as consequence RTC registers (including - the backup registers) are set to their reset values. - -@endverbatim - * @{ - */ -/** - * @brief Initialize the RCC extended peripherals clocks according to the specified - * parameters in the RCC_PeriphCLKInitTypeDef. - * @param PeriphClkInit pointer to an RCC_PeriphCLKInitTypeDef structure that - * contains a field PeriphClockSelection which can be a combination of the following values: - * @arg @ref RCC_PERIPHCLK_RTC RTC peripheral clock - * @arg @ref RCC_PERIPHCLK_ADC ADC peripheral clock - @if STM32L462xx - * @arg @ref RCC_PERIPHCLK_DFSDM1 DFSDM1 peripheral clock (only for devices with DFSDM1) - @endif - @if STM32L486xx - * @arg @ref RCC_PERIPHCLK_DFSDM1 DFSDM1 peripheral clock (only for devices with DFSDM1) - @endif - @if STM32L4A6xx - * @arg @ref RCC_PERIPHCLK_DFSDM1 DFSDM1 peripheral clock (only for devices with DFSDM1) - @endif - * @arg @ref RCC_PERIPHCLK_I2C1 I2C1 peripheral clock - * @arg @ref RCC_PERIPHCLK_I2C2 I2C2 peripheral clock - * @arg @ref RCC_PERIPHCLK_I2C3 I2C3 peripheral clock - @if STM32L462xx - * @arg @ref RCC_PERIPHCLK_I2C4 I2C4 peripheral clock (only for devices with I2C4) - @endif - @if STM32L4A6xx - * @arg @ref RCC_PERIPHCLK_I2C4 I2C4 peripheral clock (only for devices with I2C4) - @endif - @if STM32L4S9xx - * @arg @ref RCC_PERIPHCLK_I2C4 I2C4 peripheral clock (only for devices with I2C4) - @endif - * @arg @ref RCC_PERIPHCLK_LPTIM1 LPTIM1 peripheral clock - * @arg @ref RCC_PERIPHCLK_LPTIM2 LPTIM2 peripheral clock - * @arg @ref RCC_PERIPHCLK_LPUART1 LPUART1 peripheral clock - * @arg @ref RCC_PERIPHCLK_RNG RNG peripheral clock - * @arg @ref RCC_PERIPHCLK_SAI1 SAI1 peripheral clock (only for devices with SAI1) - @if STM32L486xx - * @arg @ref RCC_PERIPHCLK_SAI2 SAI2 peripheral clock (only for devices with SAI2) - @endif - @if STM32L4A6xx - * @arg @ref RCC_PERIPHCLK_SAI2 SAI2 peripheral clock (only for devices with SAI2) - @endif - @if STM32L4S9xx - * @arg @ref RCC_PERIPHCLK_SAI2 SAI2 peripheral clock (only for devices with SAI2) - @endif - * @arg @ref RCC_PERIPHCLK_SDMMC1 SDMMC1 peripheral clock - @if STM32L443xx - * @arg @ref RCC_PERIPHCLK_SWPMI1 SWPMI1 peripheral clock (only for devices with SWPMI1) - @endif - @if STM32L486xx - * @arg @ref RCC_PERIPHCLK_SWPMI1 SWPMI1 peripheral clock (only for devices with SWPMI1) - @endif - @if STM32L4A6xx - * @arg @ref RCC_PERIPHCLK_SWPMI1 SWPMI1 peripheral clock (only for devices with SWPMI1) - @endif - * @arg @ref RCC_PERIPHCLK_USART1 USART1 peripheral clock - * @arg @ref RCC_PERIPHCLK_USART2 USART1 peripheral clock - * @arg @ref RCC_PERIPHCLK_USART3 USART1 peripheral clock - @if STM32L462xx - * @arg @ref RCC_PERIPHCLK_UART4 USART1 peripheral clock (only for devices with UART4) - @endif - @if STM32L486xx - * @arg @ref RCC_PERIPHCLK_UART4 USART1 peripheral clock (only for devices with UART4) - * @arg @ref RCC_PERIPHCLK_UART5 USART1 peripheral clock (only for devices with UART5) - * @arg @ref RCC_PERIPHCLK_USB USB peripheral clock (only for devices with USB) - @endif - @if STM32L4A6xx - * @arg @ref RCC_PERIPHCLK_UART4 USART1 peripheral clock (only for devices with UART4) - * @arg @ref RCC_PERIPHCLK_UART5 USART1 peripheral clock (only for devices with UART5) - * @arg @ref RCC_PERIPHCLK_USB USB peripheral clock (only for devices with USB) - @endif - @if STM32L4S9xx - * @arg @ref RCC_PERIPHCLK_UART4 USART1 peripheral clock (only for devices with UART4) - * @arg @ref RCC_PERIPHCLK_UART5 USART1 peripheral clock (only for devices with UART5) - * @arg @ref RCC_PERIPHCLK_USB USB peripheral clock (only for devices with USB) - * @arg @ref RCC_PERIPHCLK_DFSDM1 DFSDM1 peripheral kernel clock (only for devices with DFSDM1) - * @arg @ref RCC_PERIPHCLK_DFSDM1AUDIO DFSDM1 peripheral audio clock (only for devices with DFSDM1) - * @arg @ref RCC_PERIPHCLK_LTDC LTDC peripheral clock (only for devices with LTDC) - * @arg @ref RCC_PERIPHCLK_DSI DSI peripheral clock (only for devices with DSI) - * @arg @ref RCC_PERIPHCLK_OSPI OctoSPI peripheral clock (only for devices with OctoSPI) - @endif - * - * @note Care must be taken when HAL_RCCEx_PeriphCLKConfig() is used to select - * the RTC clock source: in this case the access to Backup domain is enabled. - * - * @retval HAL status - */ -HAL_StatusTypeDef HAL_RCCEx_PeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit) -{ - uint32_t tmpregister, tickstart; /* no init needed */ - HAL_StatusTypeDef ret = HAL_OK; /* Intermediate status */ - HAL_StatusTypeDef status = HAL_OK; /* Final status */ - - /* Check the parameters */ - assert_param(IS_RCC_PERIPHCLOCK(PeriphClkInit->PeriphClockSelection)); - -#if defined(SAI1) - - /*-------------------------- SAI1 clock source configuration ---------------------*/ - if((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAI1) == RCC_PERIPHCLK_SAI1)) - { - /* Check the parameters */ - assert_param(IS_RCC_SAI1CLK(PeriphClkInit->Sai1ClockSelection)); - - switch(PeriphClkInit->Sai1ClockSelection) - { - case RCC_SAI1CLKSOURCE_PLL: /* PLL is used as clock source for SAI1*/ - /* Enable SAI Clock output generated from System PLL . */ -#if defined(RCC_PLLSAI2_SUPPORT) - __HAL_RCC_PLLCLKOUT_ENABLE(RCC_PLL_SAI3CLK); -#else - __HAL_RCC_PLLCLKOUT_ENABLE(RCC_PLL_SAI2CLK); -#endif /* RCC_PLLSAI2_SUPPORT */ - /* SAI1 clock source config set later after clock selection check */ - break; - - case RCC_SAI1CLKSOURCE_PLLSAI1: /* PLLSAI1 is used as clock source for SAI1*/ - /* PLLSAI1 input clock, parameters M, N & P configuration and clock output (PLLSAI1ClockOut) */ - ret = RCCEx_PLLSAI1_Config(&(PeriphClkInit->PLLSAI1), DIVIDER_P_UPDATE); - /* SAI1 clock source config set later after clock selection check */ - break; - -#if defined(RCC_PLLSAI2_SUPPORT) - - case RCC_SAI1CLKSOURCE_PLLSAI2: /* PLLSAI2 is used as clock source for SAI1*/ - /* PLLSAI2 input clock, parameters M, N & P configuration clock output (PLLSAI2ClockOut) */ - ret = RCCEx_PLLSAI2_Config(&(PeriphClkInit->PLLSAI2), DIVIDER_P_UPDATE); - /* SAI1 clock source config set later after clock selection check */ - break; - -#endif /* RCC_PLLSAI2_SUPPORT */ - - case RCC_SAI1CLKSOURCE_PIN: /* External clock is used as source of SAI1 clock*/ -#if defined(STM32L4P5xx) || defined(STM32L4Q5xx) || defined(STM32L4R5xx) || defined(STM32L4R7xx) || defined(STM32L4R9xx) || defined(STM32L4S5xx) || defined(STM32L4S7xx) || defined(STM32L4S9xx) - case RCC_SAI1CLKSOURCE_HSI: /* HSI is used as source of SAI1 clock*/ -#endif /* STM32L4P5xx || STM32L4Q5xx || STM32L4R5xx || STM32L4R7xx || STM32L4R9xx || STM32L4S5xx || STM32L4S7xx || STM32L4S9xx */ - /* SAI1 clock source config set later after clock selection check */ - break; - - default: - ret = HAL_ERROR; - break; - } - - if(ret == HAL_OK) - { - /* Set the source of SAI1 clock*/ - __HAL_RCC_SAI1_CONFIG(PeriphClkInit->Sai1ClockSelection); - } - else - { - /* set overall return value */ - status = ret; - } - } - -#endif /* SAI1 */ - -#if defined(SAI2) - - /*-------------------------- SAI2 clock source configuration ---------------------*/ - if((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAI2) == RCC_PERIPHCLK_SAI2)) - { - /* Check the parameters */ - assert_param(IS_RCC_SAI2CLK(PeriphClkInit->Sai2ClockSelection)); - - switch(PeriphClkInit->Sai2ClockSelection) - { - case RCC_SAI2CLKSOURCE_PLL: /* PLL is used as clock source for SAI2*/ - /* Enable SAI Clock output generated from System PLL . */ - __HAL_RCC_PLLCLKOUT_ENABLE(RCC_PLL_SAI3CLK); - /* SAI2 clock source config set later after clock selection check */ - break; - - case RCC_SAI2CLKSOURCE_PLLSAI1: /* PLLSAI1 is used as clock source for SAI2*/ - /* PLLSAI1 input clock, parameters M, N & P configuration and clock output (PLLSAI1ClockOut) */ - ret = RCCEx_PLLSAI1_Config(&(PeriphClkInit->PLLSAI1), DIVIDER_P_UPDATE); - /* SAI2 clock source config set later after clock selection check */ - break; - - case RCC_SAI2CLKSOURCE_PLLSAI2: /* PLLSAI2 is used as clock source for SAI2*/ - /* PLLSAI2 input clock, parameters M, N & P configuration and clock output (PLLSAI2ClockOut) */ - ret = RCCEx_PLLSAI2_Config(&(PeriphClkInit->PLLSAI2), DIVIDER_P_UPDATE); - /* SAI2 clock source config set later after clock selection check */ - break; - - case RCC_SAI2CLKSOURCE_PIN: /* External clock is used as source of SAI2 clock*/ -#if defined(STM32L4P5xx) || defined(STM32L4Q5xx) || defined(STM32L4R5xx) || defined(STM32L4R7xx) || defined(STM32L4R9xx) || defined(STM32L4S5xx) || defined(STM32L4S7xx) || defined(STM32L4S9xx) - case RCC_SAI2CLKSOURCE_HSI: /* HSI is used as source of SAI2 clock*/ -#endif /* STM32L4P5xx || STM32L4Q5xx || STM32L4R5xx || STM32L4R7xx || STM32L4R9xx || STM32L4S5xx || STM32L4S7xx || STM32L4S9xx */ - /* SAI2 clock source config set later after clock selection check */ - break; - - default: - ret = HAL_ERROR; - break; - } - - if(ret == HAL_OK) - { - /* Set the source of SAI2 clock*/ - __HAL_RCC_SAI2_CONFIG(PeriphClkInit->Sai2ClockSelection); - } - else - { - /* set overall return value */ - status = ret; - } - } -#endif /* SAI2 */ - - /*-------------------------- RTC clock source configuration ----------------------*/ - if((PeriphClkInit->PeriphClockSelection & RCC_PERIPHCLK_RTC) == RCC_PERIPHCLK_RTC) - { - FlagStatus pwrclkchanged = RESET; - - /* Check for RTC Parameters used to output RTCCLK */ - assert_param(IS_RCC_RTCCLKSOURCE(PeriphClkInit->RTCClockSelection)); - - /* Enable Power Clock */ - if(__HAL_RCC_PWR_IS_CLK_DISABLED() != 0U) - { - __HAL_RCC_PWR_CLK_ENABLE(); - pwrclkchanged = SET; - } - - /* Enable write access to Backup domain */ - SET_BIT(PWR->CR1, PWR_CR1_DBP); - - /* Wait for Backup domain Write protection disable */ - tickstart = HAL_GetTick(); - - while(READ_BIT(PWR->CR1, PWR_CR1_DBP) == 0U) - { - if((HAL_GetTick() - tickstart) > RCC_DBP_TIMEOUT_VALUE) - { - ret = HAL_TIMEOUT; - break; - } - } - - if(ret == HAL_OK) - { - /* Reset the Backup domain only if the RTC Clock source selection is modified from default */ - tmpregister = READ_BIT(RCC->BDCR, RCC_BDCR_RTCSEL); - - if((tmpregister != RCC_RTCCLKSOURCE_NONE) && (tmpregister != PeriphClkInit->RTCClockSelection)) - { - /* Store the content of BDCR register before the reset of Backup Domain */ - tmpregister = READ_BIT(RCC->BDCR, ~(RCC_BDCR_RTCSEL)); - /* RTC Clock selection can be changed only if the Backup Domain is reset */ - __HAL_RCC_BACKUPRESET_FORCE(); - __HAL_RCC_BACKUPRESET_RELEASE(); - /* Restore the Content of BDCR register */ - RCC->BDCR = tmpregister; - } - - /* Wait for LSE reactivation if LSE was enable prior to Backup Domain reset */ - if (HAL_IS_BIT_SET(tmpregister, RCC_BDCR_LSEON)) - { - /* Get Start Tick*/ - tickstart = HAL_GetTick(); - - /* Wait till LSE is ready */ - while(READ_BIT(RCC->BDCR, RCC_BDCR_LSERDY) == 0U) - { - if((HAL_GetTick() - tickstart) > RCC_LSE_TIMEOUT_VALUE) - { - ret = HAL_TIMEOUT; - break; - } - } - } - - if(ret == HAL_OK) - { - /* Apply new RTC clock source selection */ - __HAL_RCC_RTC_CONFIG(PeriphClkInit->RTCClockSelection); - } - else - { - /* set overall return value */ - status = ret; - } - } - else - { - /* set overall return value */ - status = ret; - } - - /* Restore clock configuration if changed */ - if(pwrclkchanged == SET) - { - __HAL_RCC_PWR_CLK_DISABLE(); - } - } - - /*-------------------------- USART1 clock source configuration -------------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_USART1) == RCC_PERIPHCLK_USART1) - { - /* Check the parameters */ - assert_param(IS_RCC_USART1CLKSOURCE(PeriphClkInit->Usart1ClockSelection)); - - /* Configure the USART1 clock source */ - __HAL_RCC_USART1_CONFIG(PeriphClkInit->Usart1ClockSelection); - } - - /*-------------------------- USART2 clock source configuration -------------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_USART2) == RCC_PERIPHCLK_USART2) - { - /* Check the parameters */ - assert_param(IS_RCC_USART2CLKSOURCE(PeriphClkInit->Usart2ClockSelection)); - - /* Configure the USART2 clock source */ - __HAL_RCC_USART2_CONFIG(PeriphClkInit->Usart2ClockSelection); - } - -#if defined(USART3) - - /*-------------------------- USART3 clock source configuration -------------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_USART3) == RCC_PERIPHCLK_USART3) - { - /* Check the parameters */ - assert_param(IS_RCC_USART3CLKSOURCE(PeriphClkInit->Usart3ClockSelection)); - - /* Configure the USART3 clock source */ - __HAL_RCC_USART3_CONFIG(PeriphClkInit->Usart3ClockSelection); - } - -#endif /* USART3 */ - -#if defined(UART4) - - /*-------------------------- UART4 clock source configuration --------------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_UART4) == RCC_PERIPHCLK_UART4) - { - /* Check the parameters */ - assert_param(IS_RCC_UART4CLKSOURCE(PeriphClkInit->Uart4ClockSelection)); - - /* Configure the UART4 clock source */ - __HAL_RCC_UART4_CONFIG(PeriphClkInit->Uart4ClockSelection); - } - -#endif /* UART4 */ - -#if defined(UART5) - - /*-------------------------- UART5 clock source configuration --------------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_UART5) == RCC_PERIPHCLK_UART5) - { - /* Check the parameters */ - assert_param(IS_RCC_UART5CLKSOURCE(PeriphClkInit->Uart5ClockSelection)); - - /* Configure the UART5 clock source */ - __HAL_RCC_UART5_CONFIG(PeriphClkInit->Uart5ClockSelection); - } - -#endif /* UART5 */ - - /*-------------------------- LPUART1 clock source configuration ------------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_LPUART1) == RCC_PERIPHCLK_LPUART1) - { - /* Check the parameters */ - assert_param(IS_RCC_LPUART1CLKSOURCE(PeriphClkInit->Lpuart1ClockSelection)); - - /* Configure the LPUART1 clock source */ - __HAL_RCC_LPUART1_CONFIG(PeriphClkInit->Lpuart1ClockSelection); - } - - /*-------------------------- LPTIM1 clock source configuration -------------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_LPTIM1) == (RCC_PERIPHCLK_LPTIM1)) - { - assert_param(IS_RCC_LPTIM1CLK(PeriphClkInit->Lptim1ClockSelection)); - __HAL_RCC_LPTIM1_CONFIG(PeriphClkInit->Lptim1ClockSelection); - } - - /*-------------------------- LPTIM2 clock source configuration -------------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_LPTIM2) == (RCC_PERIPHCLK_LPTIM2)) - { - assert_param(IS_RCC_LPTIM2CLK(PeriphClkInit->Lptim2ClockSelection)); - __HAL_RCC_LPTIM2_CONFIG(PeriphClkInit->Lptim2ClockSelection); - } - - /*-------------------------- I2C1 clock source configuration ---------------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2C1) == RCC_PERIPHCLK_I2C1) - { - /* Check the parameters */ - assert_param(IS_RCC_I2C1CLKSOURCE(PeriphClkInit->I2c1ClockSelection)); - - /* Configure the I2C1 clock source */ - __HAL_RCC_I2C1_CONFIG(PeriphClkInit->I2c1ClockSelection); - } - -#if defined(I2C2) - - /*-------------------------- I2C2 clock source configuration ---------------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2C2) == RCC_PERIPHCLK_I2C2) - { - /* Check the parameters */ - assert_param(IS_RCC_I2C2CLKSOURCE(PeriphClkInit->I2c2ClockSelection)); - - /* Configure the I2C2 clock source */ - __HAL_RCC_I2C2_CONFIG(PeriphClkInit->I2c2ClockSelection); - } - -#endif /* I2C2 */ - - /*-------------------------- I2C3 clock source configuration ---------------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2C3) == RCC_PERIPHCLK_I2C3) - { - /* Check the parameters */ - assert_param(IS_RCC_I2C3CLKSOURCE(PeriphClkInit->I2c3ClockSelection)); - - /* Configure the I2C3 clock source */ - __HAL_RCC_I2C3_CONFIG(PeriphClkInit->I2c3ClockSelection); - } - -#if defined(I2C4) - - /*-------------------------- I2C4 clock source configuration ---------------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2C4) == RCC_PERIPHCLK_I2C4) - { - /* Check the parameters */ - assert_param(IS_RCC_I2C4CLKSOURCE(PeriphClkInit->I2c4ClockSelection)); - - /* Configure the I2C4 clock source */ - __HAL_RCC_I2C4_CONFIG(PeriphClkInit->I2c4ClockSelection); - } - -#endif /* I2C4 */ - -#if defined(USB_OTG_FS) || defined(USB) - - /*-------------------------- USB clock source configuration ----------------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_USB) == (RCC_PERIPHCLK_USB)) - { - assert_param(IS_RCC_USBCLKSOURCE(PeriphClkInit->UsbClockSelection)); - __HAL_RCC_USB_CONFIG(PeriphClkInit->UsbClockSelection); - - if(PeriphClkInit->UsbClockSelection == RCC_USBCLKSOURCE_PLL) - { - /* Enable PLL48M1CLK output clock */ - __HAL_RCC_PLLCLKOUT_ENABLE(RCC_PLL_48M1CLK); - } - else - { -#if defined(RCC_PLLSAI1_SUPPORT) - if(PeriphClkInit->UsbClockSelection == RCC_USBCLKSOURCE_PLLSAI1) - { - /* PLLSAI1 input clock, parameters M, N & Q configuration and clock output (PLLSAI1ClockOut) */ - ret = RCCEx_PLLSAI1_Config(&(PeriphClkInit->PLLSAI1), DIVIDER_Q_UPDATE); - - if(ret != HAL_OK) - { - /* set overall return value */ - status = ret; - } - } -#endif /* RCC_PLLSAI1_SUPPORT */ - } - } - -#endif /* USB_OTG_FS || USB */ - -#if defined(SDMMC1) - - /*-------------------------- SDMMC1 clock source configuration -------------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SDMMC1) == (RCC_PERIPHCLK_SDMMC1)) - { - assert_param(IS_RCC_SDMMC1CLKSOURCE(PeriphClkInit->Sdmmc1ClockSelection)); - __HAL_RCC_SDMMC1_CONFIG(PeriphClkInit->Sdmmc1ClockSelection); - - if(PeriphClkInit->Sdmmc1ClockSelection == RCC_SDMMC1CLKSOURCE_PLL) /* PLL "Q" ? */ - { - /* Enable PLL48M1CLK output clock */ - __HAL_RCC_PLLCLKOUT_ENABLE(RCC_PLL_48M1CLK); - } -#if defined(RCC_CCIPR2_SDMMCSEL) - else if(PeriphClkInit->Sdmmc1ClockSelection == RCC_SDMMC1CLKSOURCE_PLLP) /* PLL "P" ? */ - { - /* Enable PLLSAI3CLK output */ - __HAL_RCC_PLLCLKOUT_ENABLE(RCC_PLL_SAI3CLK); - } -#endif - else if(PeriphClkInit->Sdmmc1ClockSelection == RCC_SDMMC1CLKSOURCE_PLLSAI1) - { - /* PLLSAI1 input clock, parameters M, N & Q configuration and clock output (PLLSAI1ClockOut) */ - ret = RCCEx_PLLSAI1_Config(&(PeriphClkInit->PLLSAI1), DIVIDER_Q_UPDATE); - - if(ret != HAL_OK) - { - /* set overall return value */ - status = ret; - } - } - else - { - /* nothing to do */ - } - } - -#endif /* SDMMC1 */ - - /*-------------------------- RNG clock source configuration ----------------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_RNG) == (RCC_PERIPHCLK_RNG)) - { - assert_param(IS_RCC_RNGCLKSOURCE(PeriphClkInit->RngClockSelection)); - __HAL_RCC_RNG_CONFIG(PeriphClkInit->RngClockSelection); - - if(PeriphClkInit->RngClockSelection == RCC_RNGCLKSOURCE_PLL) - { - /* Enable PLL48M1CLK output clock */ - __HAL_RCC_PLLCLKOUT_ENABLE(RCC_PLL_48M1CLK); - } -#if defined(RCC_PLLSAI1_SUPPORT) - else if(PeriphClkInit->RngClockSelection == RCC_RNGCLKSOURCE_PLLSAI1) - { - /* PLLSAI1 input clock, parameters M, N & Q configuration and clock output (PLLSAI1ClockOut) */ - ret = RCCEx_PLLSAI1_Config(&(PeriphClkInit->PLLSAI1), DIVIDER_Q_UPDATE); - - if(ret != HAL_OK) - { - /* set overall return value */ - status = ret; - } - } -#endif /* RCC_PLLSAI1_SUPPORT */ - else - { - /* nothing to do */ - } - } - - /*-------------------------- ADC clock source configuration ----------------------*/ -#if !defined(STM32L412xx) && !defined(STM32L422xx) - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_ADC) == RCC_PERIPHCLK_ADC) - { - /* Check the parameters */ - assert_param(IS_RCC_ADCCLKSOURCE(PeriphClkInit->AdcClockSelection)); - - /* Configure the ADC interface clock source */ - __HAL_RCC_ADC_CONFIG(PeriphClkInit->AdcClockSelection); - -#if defined(RCC_PLLSAI1_SUPPORT) - if(PeriphClkInit->AdcClockSelection == RCC_ADCCLKSOURCE_PLLSAI1) - { - /* PLLSAI1 input clock, parameters M, N & R configuration and clock output (PLLSAI1ClockOut) */ - ret = RCCEx_PLLSAI1_Config(&(PeriphClkInit->PLLSAI1), DIVIDER_R_UPDATE); - - if(ret != HAL_OK) - { - /* set overall return value */ - status = ret; - } - } -#endif /* RCC_PLLSAI1_SUPPORT */ - -#if defined(STM32L471xx) || defined(STM32L475xx) || defined(STM32L476xx) || defined(STM32L485xx) || defined(STM32L486xx) || defined(STM32L496xx) || defined(STM32L4A6xx) - - else if(PeriphClkInit->AdcClockSelection == RCC_ADCCLKSOURCE_PLLSAI2) - { - /* PLLSAI2 input clock, parameters M, N & R configuration and clock output (PLLSAI2ClockOut) */ - ret = RCCEx_PLLSAI2_Config(&(PeriphClkInit->PLLSAI2), DIVIDER_R_UPDATE); - - if(ret != HAL_OK) - { - /* set overall return value */ - status = ret; - } - } - -#endif /* STM32L471xx || STM32L475xx || STM32L476xx || STM32L485xx || STM32L486xx || STM32L496xx || STM32L4A6xx */ - - } -#endif /* !STM32L412xx && !STM32L422xx */ - -#if defined(SWPMI1) - - /*-------------------------- SWPMI1 clock source configuration -------------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SWPMI1) == RCC_PERIPHCLK_SWPMI1) - { - /* Check the parameters */ - assert_param(IS_RCC_SWPMI1CLKSOURCE(PeriphClkInit->Swpmi1ClockSelection)); - - /* Configure the SWPMI1 clock source */ - __HAL_RCC_SWPMI1_CONFIG(PeriphClkInit->Swpmi1ClockSelection); - } - -#endif /* SWPMI1 */ - -#if defined(DFSDM1_Filter0) - - /*-------------------------- DFSDM1 clock source configuration -------------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_DFSDM1) == RCC_PERIPHCLK_DFSDM1) - { - /* Check the parameters */ - assert_param(IS_RCC_DFSDM1CLKSOURCE(PeriphClkInit->Dfsdm1ClockSelection)); - - /* Configure the DFSDM1 interface clock source */ - __HAL_RCC_DFSDM1_CONFIG(PeriphClkInit->Dfsdm1ClockSelection); - } - -#if defined(STM32L4P5xx) || defined(STM32L4Q5xx) || defined(STM32L4R5xx) || defined(STM32L4R7xx) || defined(STM32L4R9xx) || defined(STM32L4S5xx) || defined(STM32L4S7xx) || defined(STM32L4S9xx) - /*-------------------------- DFSDM1 audio clock source configuration -------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_DFSDM1AUDIO) == RCC_PERIPHCLK_DFSDM1AUDIO) - { - /* Check the parameters */ - assert_param(IS_RCC_DFSDM1AUDIOCLKSOURCE(PeriphClkInit->Dfsdm1AudioClockSelection)); - - /* Configure the DFSDM1 interface audio clock source */ - __HAL_RCC_DFSDM1AUDIO_CONFIG(PeriphClkInit->Dfsdm1AudioClockSelection); - } - -#endif /* STM32L4P5xx || STM32L4Q5xx || STM32L4R5xx || STM32L4R7xx || STM32L4R9xx || STM32L4S5xx || STM32L4S7xx || STM32L4S9xx */ - -#endif /* DFSDM1_Filter0 */ - -#if defined(LTDC) - - /*-------------------------- LTDC clock source configuration --------------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_LTDC) == RCC_PERIPHCLK_LTDC) - { - /* Check the parameters */ - assert_param(IS_RCC_LTDCCLKSOURCE(PeriphClkInit->LtdcClockSelection)); - - /* Disable the PLLSAI2 */ - __HAL_RCC_PLLSAI2_DISABLE(); - - /* Get Start Tick*/ - tickstart = HAL_GetTick(); - - /* Wait till PLLSAI2 is ready */ - while(READ_BIT(RCC->CR, RCC_CR_PLLSAI2RDY) != 0U) - { - if((HAL_GetTick() - tickstart) > PLLSAI2_TIMEOUT_VALUE) - { - ret = HAL_TIMEOUT; - break; - } - } - - if(ret == HAL_OK) - { - /* Configure the LTDC clock source */ - __HAL_RCC_LTDC_CONFIG(PeriphClkInit->LtdcClockSelection); - - /* PLLSAI2 input clock, parameters M, N & R configuration and clock output (PLLSAI2ClockOut) */ - ret = RCCEx_PLLSAI2_Config(&(PeriphClkInit->PLLSAI2), DIVIDER_R_UPDATE); - } - - if(ret != HAL_OK) - { - /* set overall return value */ - status = ret; - } - } - -#endif /* LTDC */ - -#if defined(DSI) - - /*-------------------------- DSI clock source configuration ---------------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_DSI) == RCC_PERIPHCLK_DSI) - { - /* Check the parameters */ - assert_param(IS_RCC_DSICLKSOURCE(PeriphClkInit->DsiClockSelection)); - - /* Configure the DSI clock source */ - __HAL_RCC_DSI_CONFIG(PeriphClkInit->DsiClockSelection); - - if(PeriphClkInit->DsiClockSelection == RCC_DSICLKSOURCE_PLLSAI2) - { - /* PLLSAI2 input clock, parameters M, N & Q configuration and clock output (PLLSAI2ClockOut) */ - ret = RCCEx_PLLSAI2_Config(&(PeriphClkInit->PLLSAI2), DIVIDER_Q_UPDATE); - - if(ret != HAL_OK) - { - /* set overall return value */ - status = ret; - } - } - } - -#endif /* DSI */ - -#if defined(OCTOSPI1) || defined(OCTOSPI2) - - /*-------------------------- OctoSPIx clock source configuration ----------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_OSPI) == RCC_PERIPHCLK_OSPI) - { - /* Check the parameters */ - assert_param(IS_RCC_OSPICLKSOURCE(PeriphClkInit->OspiClockSelection)); - - /* Configure the OctoSPI clock source */ - __HAL_RCC_OSPI_CONFIG(PeriphClkInit->OspiClockSelection); - - if(PeriphClkInit->OspiClockSelection == RCC_OSPICLKSOURCE_PLL) - { - /* Enable PLL48M1CLK output */ - __HAL_RCC_PLLCLKOUT_ENABLE(RCC_PLL_48M1CLK); - } - } - -#endif /* OCTOSPI1 || OCTOSPI2 */ - - return status; -} - -/** - * @brief Get the RCC_ClkInitStruct according to the internal RCC configuration registers. - * @param PeriphClkInit pointer to an RCC_PeriphCLKInitTypeDef structure that - * returns the configuration information for the Extended Peripherals - * clocks(SAI1, SAI2, LPTIM1, LPTIM2, I2C1, I2C2, I2C3, I2C4, LPUART1, - * USART1, USART2, USART3, UART4, UART5, RTC, ADCx, DFSDMx, SWPMI1, USB, SDMMC1 and RNG). - * @retval None - */ -void HAL_RCCEx_GetPeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit) -{ - /* Set all possible values for the extended clock type parameter------------*/ - -#if defined(STM32L412xx) || defined(STM32L422xx) - - PeriphClkInit->PeriphClockSelection = RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_USART2 | RCC_PERIPHCLK_USART3 | \ - RCC_PERIPHCLK_LPUART1 | RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_I2C2 | RCC_PERIPHCLK_I2C3 | \ - RCC_PERIPHCLK_LPTIM1 | RCC_PERIPHCLK_LPTIM2 | RCC_PERIPHCLK_USB | \ - RCC_PERIPHCLK_RNG | \ - RCC_PERIPHCLK_RTC ; - -#elif defined(STM32L431xx) - - PeriphClkInit->PeriphClockSelection = RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_USART2 | RCC_PERIPHCLK_USART3 | \ - RCC_PERIPHCLK_LPUART1 | RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_I2C2 | RCC_PERIPHCLK_I2C3 | \ - RCC_PERIPHCLK_LPTIM1 | RCC_PERIPHCLK_LPTIM2 | RCC_PERIPHCLK_SAI1 | \ - RCC_PERIPHCLK_SDMMC1 | RCC_PERIPHCLK_RNG | RCC_PERIPHCLK_ADC | RCC_PERIPHCLK_SWPMI1 | \ - RCC_PERIPHCLK_RTC ; - -#elif defined(STM32L432xx) || defined(STM32L442xx) - - PeriphClkInit->PeriphClockSelection = RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_USART2 | \ - RCC_PERIPHCLK_LPUART1 | RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_I2C3 | \ - RCC_PERIPHCLK_LPTIM1 | RCC_PERIPHCLK_LPTIM2 | RCC_PERIPHCLK_SAI1 | RCC_PERIPHCLK_USB | \ - RCC_PERIPHCLK_RNG | RCC_PERIPHCLK_ADC | RCC_PERIPHCLK_SWPMI1 | \ - RCC_PERIPHCLK_RTC ; - -#elif defined(STM32L433xx) || defined(STM32L443xx) - - PeriphClkInit->PeriphClockSelection = RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_USART2 | RCC_PERIPHCLK_USART3 | \ - RCC_PERIPHCLK_LPUART1 | RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_I2C2 | RCC_PERIPHCLK_I2C3 | \ - RCC_PERIPHCLK_LPTIM1 | RCC_PERIPHCLK_LPTIM2 | RCC_PERIPHCLK_SAI1 | RCC_PERIPHCLK_USB | \ - RCC_PERIPHCLK_SDMMC1 | RCC_PERIPHCLK_RNG | RCC_PERIPHCLK_ADC | RCC_PERIPHCLK_SWPMI1 | \ - RCC_PERIPHCLK_RTC ; - -#elif defined(STM32L451xx) - - PeriphClkInit->PeriphClockSelection = RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_USART2 | RCC_PERIPHCLK_USART3 | RCC_PERIPHCLK_UART4 | \ - RCC_PERIPHCLK_LPUART1 | RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_I2C2 | RCC_PERIPHCLK_I2C3 | RCC_PERIPHCLK_I2C4 | \ - RCC_PERIPHCLK_LPTIM1 | RCC_PERIPHCLK_LPTIM2 | RCC_PERIPHCLK_SAI1 | \ - RCC_PERIPHCLK_SDMMC1 | RCC_PERIPHCLK_RNG | RCC_PERIPHCLK_ADC | RCC_PERIPHCLK_DFSDM1 | \ - RCC_PERIPHCLK_RTC ; - -#elif defined(STM32L452xx) || defined(STM32L462xx) - - PeriphClkInit->PeriphClockSelection = RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_USART2 | RCC_PERIPHCLK_USART3 | RCC_PERIPHCLK_UART4 | \ - RCC_PERIPHCLK_LPUART1 | RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_I2C2 | RCC_PERIPHCLK_I2C3 | RCC_PERIPHCLK_I2C4 | \ - RCC_PERIPHCLK_LPTIM1 | RCC_PERIPHCLK_LPTIM2 | RCC_PERIPHCLK_SAI1 | RCC_PERIPHCLK_USB | \ - RCC_PERIPHCLK_SDMMC1 | RCC_PERIPHCLK_RNG | RCC_PERIPHCLK_ADC | RCC_PERIPHCLK_DFSDM1 | \ - RCC_PERIPHCLK_RTC ; - -#elif defined(STM32L471xx) - - PeriphClkInit->PeriphClockSelection = RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_USART2 | RCC_PERIPHCLK_USART3 | RCC_PERIPHCLK_UART4 | RCC_PERIPHCLK_UART5 | \ - RCC_PERIPHCLK_LPUART1 | RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_I2C2 | RCC_PERIPHCLK_I2C3 | \ - RCC_PERIPHCLK_LPTIM1 | RCC_PERIPHCLK_LPTIM2 | RCC_PERIPHCLK_SAI1 | RCC_PERIPHCLK_SAI2 | \ - RCC_PERIPHCLK_SDMMC1 | RCC_PERIPHCLK_RNG | RCC_PERIPHCLK_ADC | RCC_PERIPHCLK_SWPMI1 | RCC_PERIPHCLK_DFSDM1 | \ - RCC_PERIPHCLK_RTC ; - -#elif defined(STM32L475xx) || defined(STM32L476xx) || defined(STM32L485xx) || defined(STM32L486xx) - - PeriphClkInit->PeriphClockSelection = RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_USART2 | RCC_PERIPHCLK_USART3 | RCC_PERIPHCLK_UART4 | RCC_PERIPHCLK_UART5 | \ - RCC_PERIPHCLK_LPUART1 | RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_I2C2 | RCC_PERIPHCLK_I2C3 | \ - RCC_PERIPHCLK_LPTIM1 | RCC_PERIPHCLK_LPTIM2 | RCC_PERIPHCLK_SAI1 | RCC_PERIPHCLK_SAI2 | RCC_PERIPHCLK_USB | \ - RCC_PERIPHCLK_SDMMC1 | RCC_PERIPHCLK_RNG | RCC_PERIPHCLK_ADC | RCC_PERIPHCLK_SWPMI1 | RCC_PERIPHCLK_DFSDM1 | \ - RCC_PERIPHCLK_RTC ; - -#elif defined(STM32L496xx) || defined(STM32L4A6xx) - - PeriphClkInit->PeriphClockSelection = RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_USART2 | RCC_PERIPHCLK_USART3 | RCC_PERIPHCLK_UART4 | RCC_PERIPHCLK_UART5 | \ - RCC_PERIPHCLK_LPUART1 | RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_I2C2 | RCC_PERIPHCLK_I2C3 | RCC_PERIPHCLK_I2C4 | \ - RCC_PERIPHCLK_LPTIM1 | RCC_PERIPHCLK_LPTIM2 | RCC_PERIPHCLK_SAI1 | RCC_PERIPHCLK_SAI2 | RCC_PERIPHCLK_USB | \ - RCC_PERIPHCLK_SDMMC1 | RCC_PERIPHCLK_RNG | RCC_PERIPHCLK_ADC | RCC_PERIPHCLK_SWPMI1 | RCC_PERIPHCLK_DFSDM1 | \ - RCC_PERIPHCLK_RTC ; - -#elif defined(STM32L4R5xx) || defined(STM32L4S5xx) - - PeriphClkInit->PeriphClockSelection = RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_USART2 | RCC_PERIPHCLK_USART3 | RCC_PERIPHCLK_UART4 | RCC_PERIPHCLK_UART5 | \ - RCC_PERIPHCLK_LPUART1 | RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_I2C2 | RCC_PERIPHCLK_I2C3 | RCC_PERIPHCLK_I2C4 | \ - RCC_PERIPHCLK_LPTIM1 | RCC_PERIPHCLK_LPTIM2 | RCC_PERIPHCLK_SAI1 | RCC_PERIPHCLK_SAI2 | RCC_PERIPHCLK_USB | \ - RCC_PERIPHCLK_SDMMC1 | RCC_PERIPHCLK_RNG | RCC_PERIPHCLK_ADC | RCC_PERIPHCLK_DFSDM1 | \ - RCC_PERIPHCLK_DFSDM1AUDIO | RCC_PERIPHCLK_RTC | RCC_PERIPHCLK_OSPI; - -#elif defined(STM32L4R7xx) || defined(STM32L4S7xx) || defined(STM32L4Q5xx) - - PeriphClkInit->PeriphClockSelection = RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_USART2 | RCC_PERIPHCLK_USART3 | RCC_PERIPHCLK_UART4 | RCC_PERIPHCLK_UART5 | \ - RCC_PERIPHCLK_LPUART1 | RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_I2C2 | RCC_PERIPHCLK_I2C3 | RCC_PERIPHCLK_I2C4 | \ - RCC_PERIPHCLK_LPTIM1 | RCC_PERIPHCLK_LPTIM2 | RCC_PERIPHCLK_SAI1 | RCC_PERIPHCLK_SAI2 | RCC_PERIPHCLK_USB | \ - RCC_PERIPHCLK_SDMMC1 | RCC_PERIPHCLK_RNG | RCC_PERIPHCLK_ADC | RCC_PERIPHCLK_DFSDM1 | \ - RCC_PERIPHCLK_DFSDM1AUDIO | RCC_PERIPHCLK_RTC | RCC_PERIPHCLK_OSPI | RCC_PERIPHCLK_LTDC; - -#elif defined(STM32L4R9xx) || defined(STM32L4S9xx) - - PeriphClkInit->PeriphClockSelection = RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_USART2 | RCC_PERIPHCLK_USART3 | RCC_PERIPHCLK_UART4 | RCC_PERIPHCLK_UART5 | \ - RCC_PERIPHCLK_LPUART1 | RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_I2C2 | RCC_PERIPHCLK_I2C3 | RCC_PERIPHCLK_I2C4 | \ - RCC_PERIPHCLK_LPTIM1 | RCC_PERIPHCLK_LPTIM2 | RCC_PERIPHCLK_SAI1 | RCC_PERIPHCLK_SAI2 | RCC_PERIPHCLK_USB | \ - RCC_PERIPHCLK_SDMMC1 | RCC_PERIPHCLK_RNG | RCC_PERIPHCLK_ADC | RCC_PERIPHCLK_DFSDM1 | \ - RCC_PERIPHCLK_DFSDM1AUDIO | RCC_PERIPHCLK_RTC | RCC_PERIPHCLK_OSPI | RCC_PERIPHCLK_LTDC | RCC_PERIPHCLK_DSI; - -#endif /* STM32L431xx */ - -#if defined(RCC_PLLSAI1_SUPPORT) - - /* Get the PLLSAI1 Clock configuration -----------------------------------------------*/ - - PeriphClkInit->PLLSAI1.PLLSAI1Source = READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC) >> RCC_PLLCFGR_PLLSRC_Pos; -#if defined(RCC_PLLSAI1M_DIV_1_16_SUPPORT) - PeriphClkInit->PLLSAI1.PLLSAI1M = (READ_BIT(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1M) >> RCC_PLLSAI1CFGR_PLLSAI1M_Pos) + 1U; -#else - PeriphClkInit->PLLSAI1.PLLSAI1M = (READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLM) >> RCC_PLLCFGR_PLLM_Pos) + 1U; -#endif /* RCC_PLLSAI1M_DIV_1_16_SUPPORT */ - PeriphClkInit->PLLSAI1.PLLSAI1N = READ_BIT(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1N) >> RCC_PLLSAI1CFGR_PLLSAI1N_Pos; - PeriphClkInit->PLLSAI1.PLLSAI1P = ((READ_BIT(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1P) >> RCC_PLLSAI1CFGR_PLLSAI1P_Pos) << 4U) + 7U; - PeriphClkInit->PLLSAI1.PLLSAI1Q = ((READ_BIT(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1Q) >> RCC_PLLSAI1CFGR_PLLSAI1Q_Pos) + 1U) * 2U; - PeriphClkInit->PLLSAI1.PLLSAI1R = ((READ_BIT(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1R) >> RCC_PLLSAI1CFGR_PLLSAI1R_Pos) + 1U) * 2U; - -#endif /* RCC_PLLSAI1_SUPPORT */ - -#if defined(RCC_PLLSAI2_SUPPORT) - - /* Get the PLLSAI2 Clock configuration -----------------------------------------------*/ - - PeriphClkInit->PLLSAI2.PLLSAI2Source = PeriphClkInit->PLLSAI1.PLLSAI1Source; -#if defined(RCC_PLLSAI2M_DIV_1_16_SUPPORT) - PeriphClkInit->PLLSAI2.PLLSAI2M = (READ_BIT(RCC->PLLSAI2CFGR, RCC_PLLSAI2CFGR_PLLSAI2M) >> RCC_PLLSAI2CFGR_PLLSAI2M_Pos) + 1U; -#else - PeriphClkInit->PLLSAI2.PLLSAI2M = PeriphClkInit->PLLSAI1.PLLSAI1M; -#endif /* RCC_PLLSAI2M_DIV_1_16_SUPPORT */ - PeriphClkInit->PLLSAI2.PLLSAI2N = READ_BIT(RCC->PLLSAI2CFGR, RCC_PLLSAI2CFGR_PLLSAI2N) >> RCC_PLLSAI2CFGR_PLLSAI2N_Pos; - PeriphClkInit->PLLSAI2.PLLSAI2P = ((READ_BIT(RCC->PLLSAI2CFGR, RCC_PLLSAI2CFGR_PLLSAI2P) >> RCC_PLLSAI2CFGR_PLLSAI2P_Pos) << 4U) + 7U; -#if defined(RCC_PLLSAI2Q_DIV_SUPPORT) - PeriphClkInit->PLLSAI2.PLLSAI2Q = ((READ_BIT(RCC->PLLSAI2CFGR, RCC_PLLSAI2CFGR_PLLSAI2Q) >> RCC_PLLSAI2CFGR_PLLSAI2Q_Pos) + 1U) * 2U; -#endif /* RCC_PLLSAI2Q_DIV_SUPPORT */ - PeriphClkInit->PLLSAI2.PLLSAI2R = ((READ_BIT(RCC->PLLSAI2CFGR, RCC_PLLSAI2CFGR_PLLSAI2R)>> RCC_PLLSAI2CFGR_PLLSAI2R_Pos) + 1U) * 2U; - -#endif /* RCC_PLLSAI2_SUPPORT */ - - /* Get the USART1 clock source ---------------------------------------------*/ - PeriphClkInit->Usart1ClockSelection = __HAL_RCC_GET_USART1_SOURCE(); - /* Get the USART2 clock source ---------------------------------------------*/ - PeriphClkInit->Usart2ClockSelection = __HAL_RCC_GET_USART2_SOURCE(); - -#if defined(USART3) - /* Get the USART3 clock source ---------------------------------------------*/ - PeriphClkInit->Usart3ClockSelection = __HAL_RCC_GET_USART3_SOURCE(); -#endif /* USART3 */ - -#if defined(UART4) - /* Get the UART4 clock source ----------------------------------------------*/ - PeriphClkInit->Uart4ClockSelection = __HAL_RCC_GET_UART4_SOURCE(); -#endif /* UART4 */ - -#if defined(UART5) - /* Get the UART5 clock source ----------------------------------------------*/ - PeriphClkInit->Uart5ClockSelection = __HAL_RCC_GET_UART5_SOURCE(); -#endif /* UART5 */ - - /* Get the LPUART1 clock source --------------------------------------------*/ - PeriphClkInit->Lpuart1ClockSelection = __HAL_RCC_GET_LPUART1_SOURCE(); - - /* Get the I2C1 clock source -----------------------------------------------*/ - PeriphClkInit->I2c1ClockSelection = __HAL_RCC_GET_I2C1_SOURCE(); - -#if defined(I2C2) - /* Get the I2C2 clock source ----------------------------------------------*/ - PeriphClkInit->I2c2ClockSelection = __HAL_RCC_GET_I2C2_SOURCE(); -#endif /* I2C2 */ - - /* Get the I2C3 clock source -----------------------------------------------*/ - PeriphClkInit->I2c3ClockSelection = __HAL_RCC_GET_I2C3_SOURCE(); - -#if defined(I2C4) - /* Get the I2C4 clock source -----------------------------------------------*/ - PeriphClkInit->I2c4ClockSelection = __HAL_RCC_GET_I2C4_SOURCE(); -#endif /* I2C4 */ - - /* Get the LPTIM1 clock source ---------------------------------------------*/ - PeriphClkInit->Lptim1ClockSelection = __HAL_RCC_GET_LPTIM1_SOURCE(); - - /* Get the LPTIM2 clock source ---------------------------------------------*/ - PeriphClkInit->Lptim2ClockSelection = __HAL_RCC_GET_LPTIM2_SOURCE(); - -#if defined(SAI1) - /* Get the SAI1 clock source -----------------------------------------------*/ - PeriphClkInit->Sai1ClockSelection = __HAL_RCC_GET_SAI1_SOURCE(); -#endif /* SAI1 */ - -#if defined(SAI2) - /* Get the SAI2 clock source -----------------------------------------------*/ - PeriphClkInit->Sai2ClockSelection = __HAL_RCC_GET_SAI2_SOURCE(); -#endif /* SAI2 */ - - /* Get the RTC clock source ------------------------------------------------*/ - PeriphClkInit->RTCClockSelection = __HAL_RCC_GET_RTC_SOURCE(); - -#if defined(USB_OTG_FS) || defined(USB) - /* Get the USB clock source ------------------------------------------------*/ - PeriphClkInit->UsbClockSelection = __HAL_RCC_GET_USB_SOURCE(); -#endif /* USB_OTG_FS || USB */ - -#if defined(SDMMC1) - /* Get the SDMMC1 clock source ---------------------------------------------*/ - PeriphClkInit->Sdmmc1ClockSelection = __HAL_RCC_GET_SDMMC1_SOURCE(); -#endif /* SDMMC1 */ - - /* Get the RNG clock source ------------------------------------------------*/ - PeriphClkInit->RngClockSelection = __HAL_RCC_GET_RNG_SOURCE(); - -#if !defined(STM32L412xx) && !defined(STM32L422xx) - /* Get the ADC clock source ------------------------------------------------*/ - PeriphClkInit->AdcClockSelection = __HAL_RCC_GET_ADC_SOURCE(); -#endif /* !STM32L412xx && !STM32L422xx */ - -#if defined(SWPMI1) - /* Get the SWPMI1 clock source ---------------------------------------------*/ - PeriphClkInit->Swpmi1ClockSelection = __HAL_RCC_GET_SWPMI1_SOURCE(); -#endif /* SWPMI1 */ - -#if defined(DFSDM1_Filter0) - /* Get the DFSDM1 clock source ---------------------------------------------*/ - PeriphClkInit->Dfsdm1ClockSelection = __HAL_RCC_GET_DFSDM1_SOURCE(); - -#if defined(STM32L4R5xx) || defined(STM32L4R7xx) || defined(STM32L4R9xx) || defined(STM32L4S5xx) || defined(STM32L4S7xx) || defined(STM32L4S9xx) - /* Get the DFSDM1 audio clock source ---------------------------------------*/ - PeriphClkInit->Dfsdm1AudioClockSelection = __HAL_RCC_GET_DFSDM1AUDIO_SOURCE(); -#endif /* STM32L4R5xx || STM32L4R7xx || STM32L4R9xx || STM32L4S5xx || STM32L4S7xx || STM32L4S9xx */ -#endif /* DFSDM1_Filter0 */ - -#if defined(LTDC) - /* Get the LTDC clock source -----------------------------------------------*/ - PeriphClkInit->LtdcClockSelection = __HAL_RCC_GET_LTDC_SOURCE(); -#endif /* LTDC */ - -#if defined(DSI) - /* Get the DSI clock source ------------------------------------------------*/ - PeriphClkInit->DsiClockSelection = __HAL_RCC_GET_DSI_SOURCE(); -#endif /* DSI */ - -#if defined(OCTOSPI1) || defined(OCTOSPI2) - /* Get the OctoSPIclock source --------------------------------------------*/ - PeriphClkInit->OspiClockSelection = __HAL_RCC_GET_OSPI_SOURCE(); -#endif /* OCTOSPI1 || OCTOSPI2 */ -} - -/** - * @brief Return the peripheral clock frequency for peripherals with clock source from PLLSAIs - * @note Return 0 if peripheral clock identifier not managed by this API - * @param PeriphClk Peripheral clock identifier - * This parameter can be one of the following values: - * @arg @ref RCC_PERIPHCLK_RTC RTC peripheral clock - * @arg @ref RCC_PERIPHCLK_ADC ADC peripheral clock - @if STM32L462xx - * @arg @ref RCC_PERIPHCLK_DFSDM1 DFSDM1 peripheral clock (only for devices with DFSDM) - @endif - @if STM32L486xx - * @arg @ref RCC_PERIPHCLK_DFSDM1 DFSDM1 peripheral clock (only for devices with DFSDM) - @endif - @if STM32L4A6xx - * @arg @ref RCC_PERIPHCLK_DFSDM1 DFSDM1 peripheral clock (only for devices with DFSDM) - @endif - * @arg @ref RCC_PERIPHCLK_I2C1 I2C1 peripheral clock - * @arg @ref RCC_PERIPHCLK_I2C2 I2C2 peripheral clock - * @arg @ref RCC_PERIPHCLK_I2C3 I2C3 peripheral clock - @if STM32L462xx - * @arg @ref RCC_PERIPHCLK_I2C4 I2C4 peripheral clock (only for devices with I2C4) - @endif - @if STM32L4A6xx - * @arg @ref RCC_PERIPHCLK_I2C4 I2C4 peripheral clock (only for devices with I2C4) - @endif - @if STM32L4S9xx - * @arg @ref RCC_PERIPHCLK_I2C4 I2C4 peripheral clock (only for devices with I2C4) - @endif - * @arg @ref RCC_PERIPHCLK_LPTIM1 LPTIM1 peripheral clock - * @arg @ref RCC_PERIPHCLK_LPTIM2 LPTIM2 peripheral clock - * @arg @ref RCC_PERIPHCLK_LPUART1 LPUART1 peripheral clock - * @arg @ref RCC_PERIPHCLK_RNG RNG peripheral clock - * @arg @ref RCC_PERIPHCLK_SAI1 SAI1 peripheral clock (only for devices with SAI1) - @if STM32L486xx - * @arg @ref RCC_PERIPHCLK_SAI2 SAI2 peripheral clock (only for devices with SAI2) - @endif - @if STM32L4A6xx - * @arg @ref RCC_PERIPHCLK_SAI2 SAI2 peripheral clock (only for devices with SAI2) - @endif - @if STM32L4S9xx - * @arg @ref RCC_PERIPHCLK_SAI2 SAI2 peripheral clock (only for devices with SAI2) - @endif - * @arg @ref RCC_PERIPHCLK_SDMMC1 SDMMC1 peripheral clock - @if STM32L443xx - * @arg @ref RCC_PERIPHCLK_SWPMI1 SWPMI1 peripheral clock (only for devices with SWPMI1) - @endif - @if STM32L486xx - * @arg @ref RCC_PERIPHCLK_SWPMI1 SWPMI1 peripheral clock (only for devices with SWPMI1) - @endif - @if STM32L4A6xx - * @arg @ref RCC_PERIPHCLK_SWPMI1 SWPMI1 peripheral clock (only for devices with SWPMI1) - @endif - * @arg @ref RCC_PERIPHCLK_USART1 USART1 peripheral clock - * @arg @ref RCC_PERIPHCLK_USART2 USART1 peripheral clock - * @arg @ref RCC_PERIPHCLK_USART3 USART1 peripheral clock - @if STM32L462xx - * @arg @ref RCC_PERIPHCLK_UART4 UART4 peripheral clock (only for devices with UART4) - * @arg @ref RCC_PERIPHCLK_USB USB peripheral clock (only for devices with USB) - @endif - @if STM32L486xx - * @arg @ref RCC_PERIPHCLK_UART4 UART4 peripheral clock (only for devices with UART4) - * @arg @ref RCC_PERIPHCLK_UART5 UART5 peripheral clock (only for devices with UART5) - * @arg @ref RCC_PERIPHCLK_USB USB peripheral clock (only for devices with USB) - @endif - @if STM32L4A6xx - * @arg @ref RCC_PERIPHCLK_UART4 UART4 peripheral clock (only for devices with UART4) - * @arg @ref RCC_PERIPHCLK_UART5 UART5 peripheral clock (only for devices with UART5) - * @arg @ref RCC_PERIPHCLK_USB USB peripheral clock (only for devices with USB) - @endif - @if STM32L4S9xx - * @arg @ref RCC_PERIPHCLK_UART4 USART1 peripheral clock (only for devices with UART4) - * @arg @ref RCC_PERIPHCLK_UART5 USART1 peripheral clock (only for devices with UART5) - * @arg @ref RCC_PERIPHCLK_USB USB peripheral clock (only for devices with USB) - * @arg @ref RCC_PERIPHCLK_DFSDM1 DFSDM1 peripheral kernel clock (only for devices with DFSDM1) - * @arg @ref RCC_PERIPHCLK_DFSDM1AUDIO DFSDM1 peripheral audio clock (only for devices with DFSDM1) - * @arg @ref RCC_PERIPHCLK_LTDC LTDC peripheral clock (only for devices with LTDC) - * @arg @ref RCC_PERIPHCLK_DSI DSI peripheral clock (only for devices with DSI) - * @arg @ref RCC_PERIPHCLK_OSPI OctoSPI peripheral clock (only for devices with OctoSPI) - @endif - * @retval Frequency in Hz - */ -uint32_t HAL_RCCEx_GetPeriphCLKFreq(uint32_t PeriphClk) -{ - uint32_t frequency = 0U; - uint32_t srcclk, pll_oscsource, pllvco, plln; /* no init needed */ -#if defined(SDMMC1) && defined(RCC_CCIPR2_SDMMCSEL) - uint32_t pllp; /* no init needed */ -#endif - - /* Check the parameters */ - assert_param(IS_RCC_PERIPHCLOCK(PeriphClk)); - - if(PeriphClk == RCC_PERIPHCLK_RTC) - { - /* Get the current RTC source */ - srcclk = __HAL_RCC_GET_RTC_SOURCE(); - - switch(srcclk) - { - case RCC_RTCCLKSOURCE_LSE: - /* Check if LSE is ready */ - if(HAL_IS_BIT_SET(RCC->BDCR, RCC_BDCR_LSERDY)) - { - frequency = LSE_VALUE; - } - break; - case RCC_RTCCLKSOURCE_LSI: - /* Check if LSI is ready */ - if(HAL_IS_BIT_SET(RCC->CSR, RCC_CSR_LSIRDY)) - { -#if defined(RCC_CSR_LSIPREDIV) - if(HAL_IS_BIT_SET(RCC->CSR, RCC_CSR_LSIPREDIV)) - { - frequency = LSI_VALUE/128U; - } - else -#endif /* RCC_CSR_LSIPREDIV */ - { - frequency = LSI_VALUE; - } - } - break; - case RCC_RTCCLKSOURCE_HSE_DIV32: - /* Check if HSE is ready */ - if(HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSERDY)) - { - frequency = HSE_VALUE / 32U; - } - break; - default: - /* No clock source, frequency default init at 0 */ - break; - } - } - else - { - /* Other external peripheral clock source than RTC */ - pll_oscsource = __HAL_RCC_GET_PLL_OSCSOURCE(); - - /* Compute PLL clock input */ - switch(pll_oscsource) - { - case RCC_PLLSOURCE_MSI: /* MSI ? */ - if(HAL_IS_BIT_SET(RCC->CR, RCC_CR_MSIRDY)) - { - /*MSI frequency range in HZ*/ - pllvco = MSIRangeTable[(__HAL_RCC_GET_MSI_RANGE() >> 4U)]; - } - else - { - pllvco = 0U; - } - break; - case RCC_PLLSOURCE_HSI: /* HSI ? */ - if(HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSIRDY)) - { - pllvco = HSI_VALUE; - } - else - { - pllvco = 0U; - } - break; - case RCC_PLLSOURCE_HSE: /* HSE ? */ - if(HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSERDY)) - { - pllvco = HSE_VALUE; - } - else - { - pllvco = 0U; - } - break; - default: - /* No source */ - pllvco = 0U; - break; - } - - switch(PeriphClk) - { -#if defined(SAI1) - - case RCC_PERIPHCLK_SAI1: - frequency = RCCEx_GetSAIxPeriphCLKFreq(RCC_PERIPHCLK_SAI1, pllvco); - break; - -#endif - -#if defined(SAI2) - - case RCC_PERIPHCLK_SAI2: - frequency = RCCEx_GetSAIxPeriphCLKFreq(RCC_PERIPHCLK_SAI2, pllvco); - break; - -#endif - -#if defined(USB_OTG_FS) || defined(USB) - - case RCC_PERIPHCLK_USB: - -#endif /* USB_OTG_FS || USB */ - - case RCC_PERIPHCLK_RNG: - -#if defined(SDMMC1) && !defined(RCC_CCIPR2_SDMMCSEL) - - case RCC_PERIPHCLK_SDMMC1: - -#endif /* SDMMC1 && !RCC_CCIPR2_SDMMCSEL */ - { - srcclk = READ_BIT(RCC->CCIPR, RCC_CCIPR_CLK48SEL); - - switch(srcclk) - { - case RCC_CCIPR_CLK48SEL: /* MSI ? */ - if(HAL_IS_BIT_SET(RCC->CR, RCC_CR_MSIRDY)) - { - /*MSI frequency range in HZ*/ - frequency = MSIRangeTable[(__HAL_RCC_GET_MSI_RANGE() >> 4U)]; - } - break; - case RCC_CCIPR_CLK48SEL_1: /* PLL ? */ - if(HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLLRDY)) - { - if(HAL_IS_BIT_SET(RCC->PLLCFGR, RCC_PLLCFGR_PLLQEN)) - { - /* f(PLL Source) * PLLN / PLLM */ - plln = READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLN) >> RCC_PLLCFGR_PLLN_Pos; - pllvco = ((pllvco * plln) / ((READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLM) >> RCC_PLLCFGR_PLLM_Pos) + 1U)); - /* f(PLL48M1CLK) = f(VCO input) / PLLQ */ - frequency = (pllvco / (((READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLQ) >> RCC_PLLCFGR_PLLQ_Pos) + 1U) << 1U)); - } - } - break; -#if defined(RCC_PLLSAI1_SUPPORT) - case RCC_CCIPR_CLK48SEL_0: /* PLLSAI1 ? */ - if(HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLLSAI1RDY)) - { - if(HAL_IS_BIT_SET(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1QEN)) - { - plln = READ_BIT(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1N) >> RCC_PLLSAI1CFGR_PLLSAI1N_Pos; -#if defined(RCC_PLLSAI1M_DIV_1_16_SUPPORT) - /* PLLSAI1M exists: apply PLLSAI1M divider for PLLSAI1 output computation */ - /* f(PLLSAI1 Source) * PLLSAI1N / PLLSAI1M */ - pllvco = ((pllvco * plln) / ((READ_BIT(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1M) >> RCC_PLLSAI1CFGR_PLLSAI1M_Pos) + 1U)); -#else - /* f(PLL Source) * PLLSAI1N / PLLM */ - pllvco = ((pllvco * plln) / ((READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLM) >> RCC_PLLCFGR_PLLM_Pos) + 1U)); -#endif - /* f(PLL48M2CLK) = f(VCOSAI1 input) / PLLSAI1Q */ - frequency = (pllvco / (((READ_BIT(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1Q) >> RCC_PLLSAI1CFGR_PLLSAI1Q_Pos) + 1U) << 1U)); - } - } - break; -#endif /* RCC_PLLSAI1_SUPPORT */ -#if defined(RCC_HSI48_SUPPORT) - case 0U: - if(HAL_IS_BIT_SET(RCC->CRRCR, RCC_CRRCR_HSI48RDY)) /* HSI48 ? */ - { - frequency = HSI48_VALUE; - } - break; -#endif /* RCC_HSI48_SUPPORT */ - default: - /* No clock source, frequency default init at 0 */ - break; - } /* switch(srcclk) */ - break; - } - -#if defined(SDMMC1) && defined(RCC_CCIPR2_SDMMCSEL) - - case RCC_PERIPHCLK_SDMMC1: - - if(HAL_IS_BIT_SET(RCC->CCIPR2, RCC_CCIPR2_SDMMCSEL)) /* PLL "P" ? */ - { - if(HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLLRDY)) - { - if(HAL_IS_BIT_SET(RCC->PLLCFGR, RCC_PLLCFGR_PLLPEN)) - { - /* f(PLL Source) * PLLN / PLLM */ - plln = READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLN) >> RCC_PLLCFGR_PLLN_Pos; - pllvco = ((pllvco * plln) / ((READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLM) >> RCC_PLLCFGR_PLLM_Pos) + 1U)); - /* f(PLLSAI3CLK) = f(VCO input) / PLLP */ - pllp = READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLPDIV) >> RCC_PLLCFGR_PLLPDIV_Pos; - if(pllp == 0U) - { - if(READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLP) != 0U) - { - pllp = 17U; - } - else - { - pllp = 7U; - } - } - frequency = (pllvco / pllp); - } - } - } - else /* 48MHz from PLL "Q" or MSI or PLLSAI1Q or HSI48 */ - { - srcclk = READ_BIT(RCC->CCIPR, RCC_CCIPR_CLK48SEL); - - switch(srcclk) - { - case RCC_CCIPR_CLK48SEL: /* MSI ? */ - if(HAL_IS_BIT_SET(RCC->CR, RCC_CR_MSIRDY)) - { - /*MSI frequency range in HZ*/ - frequency = MSIRangeTable[(__HAL_RCC_GET_MSI_RANGE() >> 4U)]; - } - break; - case RCC_CCIPR_CLK48SEL_1: /* PLL "Q" ? */ - if(HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLLRDY)) - { - if(HAL_IS_BIT_SET(RCC->PLLCFGR, RCC_PLLCFGR_PLLQEN)) - { - /* f(PLL Source) * PLLN / PLLM */ - plln = READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLN) >> RCC_PLLCFGR_PLLN_Pos; - pllvco = ((pllvco * plln) / ((READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLM) >> RCC_PLLCFGR_PLLM_Pos) + 1U)); - /* f(PLL48M1CLK) = f(VCO input) / PLLQ */ - frequency = (pllvco / (((READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLQ) >> RCC_PLLCFGR_PLLQ_Pos) + 1U) << 1U)); - } - } - break; - case RCC_CCIPR_CLK48SEL_0: /* PLLSAI1 ? */ - if(HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLLSAI1RDY)) - { - if(HAL_IS_BIT_SET(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1QEN)) - { - /* f(PLLSAI1 Source) * PLLSAI1N / PLLSAI1M */ - plln = READ_BIT(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1N) >> RCC_PLLSAI1CFGR_PLLSAI1N_Pos; - pllvco = ((pllvco * plln) / ((READ_BIT(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1M) >> RCC_PLLSAI1CFGR_PLLSAI1M_Pos) + 1U)); - /* f(PLL48M2CLK) = f(VCOSAI1 input) / PLLSAI1Q */ - frequency = (pllvco / (((READ_BIT(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1Q) >> RCC_PLLSAI1CFGR_PLLSAI1Q_Pos) + 1U) << 1U)); - } - } - break; - case 0U: - if(HAL_IS_BIT_SET(RCC->CRRCR, RCC_CRRCR_HSI48RDY)) /* HSI48 ? */ - { - frequency = HSI48_VALUE; - } - break; - default: - /* No clock source, frequency default init at 0 */ - break; - } /* switch(srcclk) */ - } - break; - -#endif /* SDMMC1 && RCC_CCIPR2_SDMMCSEL */ - - case RCC_PERIPHCLK_USART1: - { - /* Get the current USART1 source */ - srcclk = __HAL_RCC_GET_USART1_SOURCE(); - - switch(srcclk) - { - case RCC_USART1CLKSOURCE_PCLK2: - frequency = HAL_RCC_GetPCLK2Freq(); - break; - case RCC_USART1CLKSOURCE_SYSCLK: - frequency = HAL_RCC_GetSysClockFreq(); - break; - case RCC_USART1CLKSOURCE_HSI: - if(HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSIRDY)) - { - frequency = HSI_VALUE; - } - break; - case RCC_USART1CLKSOURCE_LSE: - if(HAL_IS_BIT_SET(RCC->BDCR, RCC_BDCR_LSERDY)) - { - frequency = LSE_VALUE; - } - break; - default: - /* No clock source, frequency default init at 0 */ - break; - } - - break; - } - - case RCC_PERIPHCLK_USART2: - { - /* Get the current USART2 source */ - srcclk = __HAL_RCC_GET_USART2_SOURCE(); - - switch(srcclk) - { - case RCC_USART2CLKSOURCE_PCLK1: - frequency = HAL_RCC_GetPCLK1Freq(); - break; - case RCC_USART2CLKSOURCE_SYSCLK: - frequency = HAL_RCC_GetSysClockFreq(); - break; - case RCC_USART2CLKSOURCE_HSI: - if(HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSIRDY)) - { - frequency = HSI_VALUE; - } - break; - case RCC_USART2CLKSOURCE_LSE: - if(HAL_IS_BIT_SET(RCC->BDCR, RCC_BDCR_LSERDY)) - { - frequency = LSE_VALUE; - } - break; - default: - /* No clock source, frequency default init at 0 */ - break; - } - - break; - } - -#if defined(USART3) - - case RCC_PERIPHCLK_USART3: - { - /* Get the current USART3 source */ - srcclk = __HAL_RCC_GET_USART3_SOURCE(); - - switch(srcclk) - { - case RCC_USART3CLKSOURCE_PCLK1: - frequency = HAL_RCC_GetPCLK1Freq(); - break; - case RCC_USART3CLKSOURCE_SYSCLK: - frequency = HAL_RCC_GetSysClockFreq(); - break; - case RCC_USART3CLKSOURCE_HSI: - if(HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSIRDY)) - { - frequency = HSI_VALUE; - } - break; - case RCC_USART3CLKSOURCE_LSE: - if(HAL_IS_BIT_SET(RCC->BDCR, RCC_BDCR_LSERDY)) - { - frequency = LSE_VALUE; - } - break; - default: - /* No clock source, frequency default init at 0 */ - break; - } - - break; - } - -#endif /* USART3 */ - -#if defined(UART4) - - case RCC_PERIPHCLK_UART4: - { - /* Get the current UART4 source */ - srcclk = __HAL_RCC_GET_UART4_SOURCE(); - - switch(srcclk) - { - case RCC_UART4CLKSOURCE_PCLK1: - frequency = HAL_RCC_GetPCLK1Freq(); - break; - case RCC_UART4CLKSOURCE_SYSCLK: - frequency = HAL_RCC_GetSysClockFreq(); - break; - case RCC_UART4CLKSOURCE_HSI: - if(HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSIRDY)) - { - frequency = HSI_VALUE; - } - break; - case RCC_UART4CLKSOURCE_LSE: - if(HAL_IS_BIT_SET(RCC->BDCR, RCC_BDCR_LSERDY)) - { - frequency = LSE_VALUE; - } - break; - default: - /* No clock source, frequency default init at 0 */ - break; - } - - break; - } - -#endif /* UART4 */ - -#if defined(UART5) - - case RCC_PERIPHCLK_UART5: - { - /* Get the current UART5 source */ - srcclk = __HAL_RCC_GET_UART5_SOURCE(); - - switch(srcclk) - { - case RCC_UART5CLKSOURCE_PCLK1: - frequency = HAL_RCC_GetPCLK1Freq(); - break; - case RCC_UART5CLKSOURCE_SYSCLK: - frequency = HAL_RCC_GetSysClockFreq(); - break; - case RCC_UART5CLKSOURCE_HSI: - if(HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSIRDY)) - { - frequency = HSI_VALUE; - } - break; - case RCC_UART5CLKSOURCE_LSE: - if(HAL_IS_BIT_SET(RCC->BDCR, RCC_BDCR_LSERDY)) - { - frequency = LSE_VALUE; - } - break; - default: - /* No clock source, frequency default init at 0 */ - break; - } - - break; - } - -#endif /* UART5 */ - - case RCC_PERIPHCLK_LPUART1: - { - /* Get the current LPUART1 source */ - srcclk = __HAL_RCC_GET_LPUART1_SOURCE(); - - switch(srcclk) - { - case RCC_LPUART1CLKSOURCE_PCLK1: - frequency = HAL_RCC_GetPCLK1Freq(); - break; - case RCC_LPUART1CLKSOURCE_SYSCLK: - frequency = HAL_RCC_GetSysClockFreq(); - break; - case RCC_LPUART1CLKSOURCE_HSI: - if(HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSIRDY)) - { - frequency = HSI_VALUE; - } - break; - case RCC_LPUART1CLKSOURCE_LSE: - if(HAL_IS_BIT_SET(RCC->BDCR, RCC_BDCR_LSERDY)) - { - frequency = LSE_VALUE; - } - break; - default: - /* No clock source, frequency default init at 0 */ - break; - } - - break; - } - - case RCC_PERIPHCLK_ADC: - { - srcclk = __HAL_RCC_GET_ADC_SOURCE(); - - switch(srcclk) - { - case RCC_ADCCLKSOURCE_SYSCLK: - frequency = HAL_RCC_GetSysClockFreq(); - break; -#if defined(RCC_PLLSAI1_SUPPORT) - case RCC_ADCCLKSOURCE_PLLSAI1: - if(HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLLSAI1RDY) && (__HAL_RCC_GET_PLLSAI1CLKOUT_CONFIG(RCC_PLLSAI1_ADC1CLK) != 0U)) - { - plln = READ_BIT(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1N) >> RCC_PLLSAI1CFGR_PLLSAI1N_Pos; -#if defined(RCC_PLLSAI1M_DIV_1_16_SUPPORT) - /* PLLSAI1M exists: apply PLLSAI1M divider for PLLSAI1 output computation */ - /* f(PLLSAI1 Source) * PLLSAI1N / PLLSAI1M */ - pllvco = ((pllvco * plln) / ((READ_BIT(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1M) >> RCC_PLLSAI1CFGR_PLLSAI1M_Pos) + 1U)); -#else - /* f(PLL Source) * PLLSAI1N / PLLM */ - pllvco = ((pllvco * plln) / ((READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLM) >> RCC_PLLCFGR_PLLM_Pos) + 1U)); -#endif - /* f(PLLADC1CLK) = f(VCOSAI1 input) / PLLSAI1R */ - frequency = (pllvco / (((READ_BIT(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1R) >> RCC_PLLSAI1CFGR_PLLSAI1R_Pos) + 1U) << 1U)); - } - break; -#endif /* RCC_PLLSAI1_SUPPORT */ -#if defined(STM32L471xx) || defined(STM32L475xx) || defined(STM32L476xx) || defined(STM32L485xx) || defined(STM32L486xx) || defined(STM32L496xx) || defined(STM32L4A6xx) - case RCC_ADCCLKSOURCE_PLLSAI2: - if(HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLLSAI2RDY) && (__HAL_RCC_GET_PLLSAI2CLKOUT_CONFIG(RCC_PLLSAI2_ADC2CLK) != 0U)) - { - plln = READ_BIT(RCC->PLLSAI2CFGR, RCC_PLLSAI2CFGR_PLLSAI2N) >> RCC_PLLSAI2CFGR_PLLSAI2N_Pos; -#if defined(RCC_PLLSAI2M_DIV_1_16_SUPPORT) - /* PLLSAI2M exists: apply PLLSAI2M divider for PLLSAI2 output computation */ - /* f(PLLSAI2 Source) * PLLSAI2N / PLLSAI2M */ - pllvco = ((pllvco * plln) / ((READ_BIT(RCC->PLLSAI2CFGR, RCC_PLLSAI2CFGR_PLLSAI2M) >> RCC_PLLSAI2CFGR_PLLSAI2M_Pos) + 1U)); -#else - /* f(PLL Source) * PLLSAI2N / PLLM */ - pllvco = ((pllvco * plln) / ((READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLM) >> RCC_PLLCFGR_PLLM_Pos) + 1U)); -#endif - /* f(PLLADC2CLK) = f(VCOSAI2 input) / PLLSAI2R */ - frequency = (pllvco / (((READ_BIT(RCC->PLLSAI2CFGR, RCC_PLLSAI2CFGR_PLLSAI2R) >> RCC_PLLSAI2CFGR_PLLSAI2R_Pos) + 1U) << 1U)); - } - break; -#endif /* STM32L471xx || STM32L475xx || STM32L476xx || STM32L485xx || STM32L486xx || STM32L496xx || STM32L4A6xx */ - default: - /* No clock source, frequency default init at 0 */ - break; - } - - break; - } - -#if defined(DFSDM1_Filter0) - - case RCC_PERIPHCLK_DFSDM1: - { - /* Get the current DFSDM1 source */ - srcclk = __HAL_RCC_GET_DFSDM1_SOURCE(); - - if(srcclk == RCC_DFSDM1CLKSOURCE_PCLK2) - { - frequency = HAL_RCC_GetPCLK2Freq(); - } - else - { - frequency = HAL_RCC_GetSysClockFreq(); - } - - break; - } - -#if defined(STM32L4R5xx) || defined(STM32L4R7xx) || defined(STM32L4R9xx) || defined(STM32L4S5xx) || defined(STM32L4S7xx) || defined(STM32L4S9xx) - - case RCC_PERIPHCLK_DFSDM1AUDIO: - { - /* Get the current DFSDM1 audio source */ - srcclk = __HAL_RCC_GET_DFSDM1AUDIO_SOURCE(); - - switch(srcclk) - { - case RCC_DFSDM1AUDIOCLKSOURCE_SAI1: - frequency = RCCEx_GetSAIxPeriphCLKFreq(RCC_PERIPHCLK_SAI1, pllvco); - break; - case RCC_DFSDM1AUDIOCLKSOURCE_MSI: - if(HAL_IS_BIT_SET(RCC->CR, RCC_CR_MSIRDY)) - { - /*MSI frequency range in HZ*/ - frequency = MSIRangeTable[(__HAL_RCC_GET_MSI_RANGE() >> 4U)]; - } - break; - case RCC_DFSDM1AUDIOCLKSOURCE_HSI: - if(HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSIRDY)) - { - frequency = HSI_VALUE; - } - break; - default: - /* No clock source, frequency default init at 0 */ - break; - } - - break; - } - -#endif /* STM32L4R5xx || STM32L4R7xx || STM32L4R9xx || STM32L4S5xx || STM32L4S7xx || STM32L4S9xx */ - -#endif /* DFSDM1_Filter0 */ - - case RCC_PERIPHCLK_I2C1: - { - /* Get the current I2C1 source */ - srcclk = __HAL_RCC_GET_I2C1_SOURCE(); - - switch(srcclk) - { - case RCC_I2C1CLKSOURCE_PCLK1: - frequency = HAL_RCC_GetPCLK1Freq(); - break; - case RCC_I2C1CLKSOURCE_SYSCLK: - frequency = HAL_RCC_GetSysClockFreq(); - break; - case RCC_I2C1CLKSOURCE_HSI: - if(HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSIRDY)) - { - frequency = HSI_VALUE; - } - break; - default: - /* No clock source, frequency default init at 0 */ - break; - } - - break; - } - -#if defined(I2C2) - - case RCC_PERIPHCLK_I2C2: - { - /* Get the current I2C2 source */ - srcclk = __HAL_RCC_GET_I2C2_SOURCE(); - - switch(srcclk) - { - case RCC_I2C2CLKSOURCE_PCLK1: - frequency = HAL_RCC_GetPCLK1Freq(); - break; - case RCC_I2C2CLKSOURCE_SYSCLK: - frequency = HAL_RCC_GetSysClockFreq(); - break; - case RCC_I2C2CLKSOURCE_HSI: - if(HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSIRDY)) - { - frequency = HSI_VALUE; - } - break; - default: - /* No clock source, frequency default init at 0 */ - break; - } - - break; - } - -#endif /* I2C2 */ - - case RCC_PERIPHCLK_I2C3: - { - /* Get the current I2C3 source */ - srcclk = __HAL_RCC_GET_I2C3_SOURCE(); - - switch(srcclk) - { - case RCC_I2C3CLKSOURCE_PCLK1: - frequency = HAL_RCC_GetPCLK1Freq(); - break; - case RCC_I2C3CLKSOURCE_SYSCLK: - frequency = HAL_RCC_GetSysClockFreq(); - break; - case RCC_I2C3CLKSOURCE_HSI: - if(HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSIRDY)) - { - frequency = HSI_VALUE; - } - break; - default: - /* No clock source, frequency default init at 0 */ - break; - } - - break; - } - -#if defined(I2C4) - - case RCC_PERIPHCLK_I2C4: - { - /* Get the current I2C4 source */ - srcclk = __HAL_RCC_GET_I2C4_SOURCE(); - - switch(srcclk) - { - case RCC_I2C4CLKSOURCE_PCLK1: - frequency = HAL_RCC_GetPCLK1Freq(); - break; - case RCC_I2C4CLKSOURCE_SYSCLK: - frequency = HAL_RCC_GetSysClockFreq(); - break; - case RCC_I2C4CLKSOURCE_HSI: - if(HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSIRDY)) - { - frequency = HSI_VALUE; - } - break; - default: - /* No clock source, frequency default init at 0 */ - break; - } - - break; - } - -#endif /* I2C4 */ - - case RCC_PERIPHCLK_LPTIM1: - { - /* Get the current LPTIM1 source */ - srcclk = __HAL_RCC_GET_LPTIM1_SOURCE(); - - switch(srcclk) - { - case RCC_LPTIM1CLKSOURCE_PCLK1: - frequency = HAL_RCC_GetPCLK1Freq(); - break; - case RCC_LPTIM1CLKSOURCE_LSI: - if(HAL_IS_BIT_SET(RCC->CSR, RCC_CSR_LSIRDY)) - { -#if defined(RCC_CSR_LSIPREDIV) - if(HAL_IS_BIT_SET(RCC->CSR, RCC_CSR_LSIPREDIV)) - { - frequency = LSI_VALUE/128U; - } - else -#endif /* RCC_CSR_LSIPREDIV */ - { - frequency = LSI_VALUE; - } - } - break; - case RCC_LPTIM1CLKSOURCE_HSI: - if(HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSIRDY)) - { - frequency = HSI_VALUE; - } - break; - case RCC_LPTIM1CLKSOURCE_LSE: - if(HAL_IS_BIT_SET(RCC->BDCR, RCC_BDCR_LSERDY)) - { - frequency = LSE_VALUE; - } - break; - default: - /* No clock source, frequency default init at 0 */ - break; - } - - break; - } - - case RCC_PERIPHCLK_LPTIM2: - { - /* Get the current LPTIM2 source */ - srcclk = __HAL_RCC_GET_LPTIM2_SOURCE(); - - switch(srcclk) - { - case RCC_LPTIM2CLKSOURCE_PCLK1: - frequency = HAL_RCC_GetPCLK1Freq(); - break; - case RCC_LPTIM2CLKSOURCE_LSI: - if(HAL_IS_BIT_SET(RCC->CSR, RCC_CSR_LSIRDY)) - { -#if defined(RCC_CSR_LSIPREDIV) - if(HAL_IS_BIT_SET(RCC->CSR, RCC_CSR_LSIPREDIV)) - { - frequency = LSI_VALUE/128U; - } - else -#endif /* RCC_CSR_LSIPREDIV */ - { - frequency = LSI_VALUE; - } - } - break; - case RCC_LPTIM2CLKSOURCE_HSI: - if(HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSIRDY)) - { - frequency = HSI_VALUE; - } - break; - case RCC_LPTIM2CLKSOURCE_LSE: - if(HAL_IS_BIT_SET(RCC->BDCR, RCC_BDCR_LSERDY)) - { - frequency = LSE_VALUE; - } - break; - default: - /* No clock source, frequency default init at 0 */ - break; - } - - break; - } - -#if defined(SWPMI1) - - case RCC_PERIPHCLK_SWPMI1: - { - /* Get the current SWPMI1 source */ - srcclk = __HAL_RCC_GET_SWPMI1_SOURCE(); - - switch(srcclk) - { - case RCC_SWPMI1CLKSOURCE_PCLK1: - frequency = HAL_RCC_GetPCLK1Freq(); - break; - case RCC_SWPMI1CLKSOURCE_HSI: - if(HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSIRDY)) - { - frequency = HSI_VALUE; - } - break; - default: - /* No clock source, frequency default init at 0 */ - break; - } - - break; - } - -#endif /* SWPMI1 */ - -#if defined(OCTOSPI1) || defined(OCTOSPI2) - - case RCC_PERIPHCLK_OSPI: - { - /* Get the current OctoSPI clock source */ - srcclk = __HAL_RCC_GET_OSPI_SOURCE(); - - switch(srcclk) - { - case RCC_OSPICLKSOURCE_SYSCLK: - frequency = HAL_RCC_GetSysClockFreq(); - break; - case RCC_OSPICLKSOURCE_MSI: - if(HAL_IS_BIT_SET(RCC->CR, RCC_CR_MSIRDY)) - { - /*MSI frequency range in HZ*/ - frequency = MSIRangeTable[(__HAL_RCC_GET_MSI_RANGE() >> 4U)]; - } - break; - case RCC_OSPICLKSOURCE_PLL: - if(HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLLRDY)) - { - if(HAL_IS_BIT_SET(RCC->PLLCFGR, RCC_PLLCFGR_PLLQEN)) - { - /* f(PLL Source) * PLLN / PLLM */ - plln = READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLN) >> RCC_PLLCFGR_PLLN_Pos; - pllvco = ((pllvco * plln) / ((READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLM) >> RCC_PLLCFGR_PLLM_Pos) + 1U)); - /* f(PLL48M1CLK) = f(VCO input) / PLLQ */ - frequency = (pllvco / (((READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLQ) >> RCC_PLLCFGR_PLLQ_Pos) + 1U) << 1U)); - } - } - break; - default: - /* No clock source, frequency default init at 0 */ - break; - } - - break; - } - -#endif /* OCTOSPI1 || OCTOSPI2 */ - - default: - break; - } - } - - return(frequency); -} - -/** - * @} - */ - -/** @defgroup RCCEx_Exported_Functions_Group2 Extended Clock management functions - * @brief Extended Clock management functions - * -@verbatim - =============================================================================== - ##### Extended clock management functions ##### - =============================================================================== - [..] - This subsection provides a set of functions allowing to control the - activation or deactivation of MSI PLL-mode, PLLSAI1, PLLSAI2, LSE CSS, - Low speed clock output and clock after wake-up from STOP mode. -@endverbatim - * @{ - */ - -#if defined(RCC_PLLSAI1_SUPPORT) - -/** - * @brief Enable PLLSAI1. - * @param PLLSAI1Init pointer to an RCC_PLLSAI1InitTypeDef structure that - * contains the configuration information for the PLLSAI1 - * @retval HAL status - */ -HAL_StatusTypeDef HAL_RCCEx_EnablePLLSAI1(RCC_PLLSAI1InitTypeDef *PLLSAI1Init) -{ - uint32_t tickstart; - HAL_StatusTypeDef status = HAL_OK; - - /* check for PLLSAI1 Parameters used to output PLLSAI1CLK */ - assert_param(IS_RCC_PLLSAI1SOURCE(PLLSAI1Init->PLLSAI1Source)); - assert_param(IS_RCC_PLLSAI1M_VALUE(PLLSAI1Init->PLLSAI1M)); - assert_param(IS_RCC_PLLSAI1N_VALUE(PLLSAI1Init->PLLSAI1N)); - assert_param(IS_RCC_PLLSAI1P_VALUE(PLLSAI1Init->PLLSAI1P)); - assert_param(IS_RCC_PLLSAI1Q_VALUE(PLLSAI1Init->PLLSAI1Q)); - assert_param(IS_RCC_PLLSAI1R_VALUE(PLLSAI1Init->PLLSAI1R)); - assert_param(IS_RCC_PLLSAI1CLOCKOUT_VALUE(PLLSAI1Init->PLLSAI1ClockOut)); - - /* Disable the PLLSAI1 */ - __HAL_RCC_PLLSAI1_DISABLE(); - - /* Get Start Tick*/ - tickstart = HAL_GetTick(); - - /* Wait till PLLSAI1 is ready to be updated */ - while(READ_BIT(RCC->CR, RCC_CR_PLLSAI1RDY) != 0U) - { - if((HAL_GetTick() - tickstart) > PLLSAI1_TIMEOUT_VALUE) - { - status = HAL_TIMEOUT; - break; - } - } - - if(status == HAL_OK) - { -#if defined(RCC_PLLSAI1M_DIV_1_16_SUPPORT) - /* Configure the PLLSAI1 Multiplication factor N */ - /* Configure the PLLSAI1 Division factors M, P, Q and R */ - __HAL_RCC_PLLSAI1_CONFIG(PLLSAI1Init->PLLSAI1M, PLLSAI1Init->PLLSAI1N, PLLSAI1Init->PLLSAI1P, PLLSAI1Init->PLLSAI1Q, PLLSAI1Init->PLLSAI1R); -#else - /* Configure the PLLSAI1 Multiplication factor N */ - /* Configure the PLLSAI1 Division factors P, Q and R */ - __HAL_RCC_PLLSAI1_CONFIG(PLLSAI1Init->PLLSAI1N, PLLSAI1Init->PLLSAI1P, PLLSAI1Init->PLLSAI1Q, PLLSAI1Init->PLLSAI1R); -#endif /* RCC_PLLSAI1M_DIV_1_16_SUPPORT */ - /* Configure the PLLSAI1 Clock output(s) */ - __HAL_RCC_PLLSAI1CLKOUT_ENABLE(PLLSAI1Init->PLLSAI1ClockOut); - - /* Enable the PLLSAI1 again by setting PLLSAI1ON to 1*/ - __HAL_RCC_PLLSAI1_ENABLE(); - - /* Get Start Tick*/ - tickstart = HAL_GetTick(); - - /* Wait till PLLSAI1 is ready */ - while(READ_BIT(RCC->CR, RCC_CR_PLLSAI1RDY) == 0U) - { - if((HAL_GetTick() - tickstart) > PLLSAI1_TIMEOUT_VALUE) - { - status = HAL_TIMEOUT; - break; - } - } - } - - return status; -} - -/** - * @brief Disable PLLSAI1. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_RCCEx_DisablePLLSAI1(void) -{ - uint32_t tickstart; - HAL_StatusTypeDef status = HAL_OK; - - /* Disable the PLLSAI1 */ - __HAL_RCC_PLLSAI1_DISABLE(); - - /* Get Start Tick*/ - tickstart = HAL_GetTick(); - - /* Wait till PLLSAI1 is ready */ - while(READ_BIT(RCC->CR, RCC_CR_PLLSAI1RDY) != 0U) - { - if((HAL_GetTick() - tickstart) > PLLSAI1_TIMEOUT_VALUE) - { - status = HAL_TIMEOUT; - break; - } - } - - /* Disable the PLLSAI1 Clock outputs */ - __HAL_RCC_PLLSAI1CLKOUT_DISABLE(RCC_PLLSAI1CFGR_PLLSAI1PEN|RCC_PLLSAI1CFGR_PLLSAI1QEN|RCC_PLLSAI1CFGR_PLLSAI1REN); - - /* Reset PLL source to save power if no PLLs on */ -#if defined(RCC_PLLSAI2_SUPPORT) - if(READ_BIT(RCC->CR, (RCC_CR_PLLRDY | RCC_CR_PLLSAI2RDY)) == 0U) - { - MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC, RCC_PLLSOURCE_NONE); - } -#else - if(READ_BIT(RCC->CR, RCC_CR_PLLRDY) == 0U) - { - MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC, RCC_PLLSOURCE_NONE); - } -#endif /* RCC_PLLSAI2_SUPPORT */ - - return status; -} - -#endif /* RCC_PLLSAI1_SUPPORT */ - -#if defined(RCC_PLLSAI2_SUPPORT) - -/** - * @brief Enable PLLSAI2. - * @param PLLSAI2Init pointer to an RCC_PLLSAI2InitTypeDef structure that - * contains the configuration information for the PLLSAI2 - * @retval HAL status - */ -HAL_StatusTypeDef HAL_RCCEx_EnablePLLSAI2(RCC_PLLSAI2InitTypeDef *PLLSAI2Init) -{ - uint32_t tickstart; - HAL_StatusTypeDef status = HAL_OK; - - /* check for PLLSAI2 Parameters used to output PLLSAI2CLK */ - assert_param(IS_RCC_PLLSAI2SOURCE(PLLSAI2Init->PLLSAI2Source)); - assert_param(IS_RCC_PLLSAI2M_VALUE(PLLSAI2Init->PLLSAI2M)); - assert_param(IS_RCC_PLLSAI2N_VALUE(PLLSAI2Init->PLLSAI2N)); - assert_param(IS_RCC_PLLSAI2P_VALUE(PLLSAI2Init->PLLSAI2P)); -#if defined(RCC_PLLSAI2Q_DIV_SUPPORT) - assert_param(IS_RCC_PLLSAI2Q_VALUE(PLLSAI2Init->PLLSAI2Q)); -#endif /* RCC_PLLSAI2Q_DIV_SUPPORT */ - assert_param(IS_RCC_PLLSAI2R_VALUE(PLLSAI2Init->PLLSAI2R)); - assert_param(IS_RCC_PLLSAI2CLOCKOUT_VALUE(PLLSAI2Init->PLLSAI2ClockOut)); - - /* Disable the PLLSAI2 */ - __HAL_RCC_PLLSAI2_DISABLE(); - - /* Get Start Tick*/ - tickstart = HAL_GetTick(); - - /* Wait till PLLSAI2 is ready to be updated */ - while(READ_BIT(RCC->CR, RCC_CR_PLLSAI2RDY) != 0U) - { - if((HAL_GetTick() - tickstart) > PLLSAI2_TIMEOUT_VALUE) - { - status = HAL_TIMEOUT; - break; - } - } - - if(status == HAL_OK) - { -#if defined(RCC_PLLSAI2M_DIV_1_16_SUPPORT) && defined(RCC_PLLSAI2Q_DIV_SUPPORT) - /* Configure the PLLSAI2 Multiplication factor N */ - /* Configure the PLLSAI2 Division factors M, P, Q and R */ - __HAL_RCC_PLLSAI2_CONFIG(PLLSAI2Init->PLLSAI2M, PLLSAI2Init->PLLSAI2N, PLLSAI2Init->PLLSAI2P, PLLSAI2Init->PLLSAI2Q, PLLSAI2Init->PLLSAI2R); -#elif defined(RCC_PLLSAI2M_DIV_1_16_SUPPORT) - /* Configure the PLLSAI2 Multiplication factor N */ - /* Configure the PLLSAI2 Division factors M, P and R */ - __HAL_RCC_PLLSAI2_CONFIG(PLLSAI2Init->PLLSAI2M, PLLSAI2Init->PLLSAI2N, PLLSAI2Init->PLLSAI2P, PLLSAI2Init->PLLSAI2R); -#elif defined(RCC_PLLSAI2Q_DIV_SUPPORT) - /* Configure the PLLSAI2 Multiplication factor N */ - /* Configure the PLLSAI2 Division factors P, Q and R */ - __HAL_RCC_PLLSAI2_CONFIG(PLLSAI2Init->PLLSAI2N, PLLSAI2Init->PLLSAI2P, PLLSAI2Init->PLLSAI2Q, PLLSAI2Init->PLLSAI2R); -#else - /* Configure the PLLSAI2 Multiplication factor N */ - /* Configure the PLLSAI2 Division factors P and R */ - __HAL_RCC_PLLSAI2_CONFIG(PLLSAI2Init->PLLSAI2N, PLLSAI2Init->PLLSAI2P, PLLSAI2Init->PLLSAI2R); -#endif /* RCC_PLLSAI2M_DIV_1_16_SUPPORT && RCC_PLLSAI2Q_DIV_SUPPORT */ - /* Configure the PLLSAI2 Clock output(s) */ - __HAL_RCC_PLLSAI2CLKOUT_ENABLE(PLLSAI2Init->PLLSAI2ClockOut); - - /* Enable the PLLSAI2 again by setting PLLSAI2ON to 1*/ - __HAL_RCC_PLLSAI2_ENABLE(); - - /* Get Start Tick*/ - tickstart = HAL_GetTick(); - - /* Wait till PLLSAI2 is ready */ - while(READ_BIT(RCC->CR, RCC_CR_PLLSAI2RDY) == 0U) - { - if((HAL_GetTick() - tickstart) > PLLSAI2_TIMEOUT_VALUE) - { - status = HAL_TIMEOUT; - break; - } - } - } - - return status; -} - -/** - * @brief Disable PLLISAI2. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_RCCEx_DisablePLLSAI2(void) -{ - uint32_t tickstart; - HAL_StatusTypeDef status = HAL_OK; - - /* Disable the PLLSAI2 */ - __HAL_RCC_PLLSAI2_DISABLE(); - - /* Get Start Tick*/ - tickstart = HAL_GetTick(); - - /* Wait till PLLSAI2 is ready */ - while(READ_BIT(RCC->CR, RCC_CR_PLLSAI2RDY) != 0U) - { - if((HAL_GetTick() - tickstart) > PLLSAI2_TIMEOUT_VALUE) - { - status = HAL_TIMEOUT; - break; - } - } - - /* Disable the PLLSAI2 Clock outputs */ -#if defined(RCC_PLLSAI2Q_DIV_SUPPORT) - __HAL_RCC_PLLSAI2CLKOUT_DISABLE(RCC_PLLSAI2CFGR_PLLSAI2PEN|RCC_PLLSAI2CFGR_PLLSAI2QEN|RCC_PLLSAI2CFGR_PLLSAI2REN); -#else - __HAL_RCC_PLLSAI2CLKOUT_DISABLE(RCC_PLLSAI2CFGR_PLLSAI2PEN|RCC_PLLSAI2CFGR_PLLSAI2REN); -#endif /* RCC_PLLSAI2M_DIV_1_16_SUPPORT && RCC_PLLSAI2Q_DIV_SUPPORT */ - - /* Reset PLL source to save power if no PLLs on */ - if(READ_BIT(RCC->CR, (RCC_CR_PLLRDY | RCC_CR_PLLSAI1RDY)) == 0U) - { - MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC, RCC_PLLSOURCE_NONE); - } - - return status; -} - -#endif /* RCC_PLLSAI2_SUPPORT */ - -/** - * @brief Configure the oscillator clock source for wakeup from Stop and CSS backup clock. - * @param WakeUpClk Wakeup clock - * This parameter can be one of the following values: - * @arg @ref RCC_STOP_WAKEUPCLOCK_MSI MSI oscillator selection - * @arg @ref RCC_STOP_WAKEUPCLOCK_HSI HSI oscillator selection - * @note This function shall not be called after the Clock Security System on HSE has been - * enabled. - * @retval None - */ -void HAL_RCCEx_WakeUpStopCLKConfig(uint32_t WakeUpClk) -{ - assert_param(IS_RCC_STOP_WAKEUPCLOCK(WakeUpClk)); - - __HAL_RCC_WAKEUPSTOP_CLK_CONFIG(WakeUpClk); -} - -/** - * @brief Configure the MSI range after standby mode. - * @note After Standby its frequency can be selected between 4 possible values (1, 2, 4 or 8 MHz). - * @param MSIRange MSI range - * This parameter can be one of the following values: - * @arg @ref RCC_MSIRANGE_4 Range 4 around 1 MHz - * @arg @ref RCC_MSIRANGE_5 Range 5 around 2 MHz - * @arg @ref RCC_MSIRANGE_6 Range 6 around 4 MHz (reset value) - * @arg @ref RCC_MSIRANGE_7 Range 7 around 8 MHz - * @retval None - */ -void HAL_RCCEx_StandbyMSIRangeConfig(uint32_t MSIRange) -{ - assert_param(IS_RCC_MSI_STANDBY_CLOCK_RANGE(MSIRange)); - - __HAL_RCC_MSI_STANDBY_RANGE_CONFIG(MSIRange); -} - -/** - * @brief Enable the LSE Clock Security System. - * @note Prior to enable the LSE Clock Security System, LSE oscillator is to be enabled - * with HAL_RCC_OscConfig() and the LSE oscillator clock is to be selected as RTC - * clock with HAL_RCCEx_PeriphCLKConfig(). - * @retval None - */ -void HAL_RCCEx_EnableLSECSS(void) -{ - SET_BIT(RCC->BDCR, RCC_BDCR_LSECSSON); -} - -/** - * @brief Disable the LSE Clock Security System. - * @note LSE Clock Security System can only be disabled after a LSE failure detection. - * @retval None - */ -void HAL_RCCEx_DisableLSECSS(void) -{ - CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSECSSON) ; - - /* Disable LSE CSS IT if any */ - __HAL_RCC_DISABLE_IT(RCC_IT_LSECSS); -} - -/** - * @brief Enable the LSE Clock Security System Interrupt & corresponding EXTI line. - * @note LSE Clock Security System Interrupt is mapped on RTC EXTI line 19 - * @retval None - */ -void HAL_RCCEx_EnableLSECSS_IT(void) -{ - /* Enable LSE CSS */ - SET_BIT(RCC->BDCR, RCC_BDCR_LSECSSON) ; - - /* Enable LSE CSS IT */ - __HAL_RCC_ENABLE_IT(RCC_IT_LSECSS); - - /* Enable IT on EXTI Line 19 */ - __HAL_RCC_LSECSS_EXTI_ENABLE_IT(); - __HAL_RCC_LSECSS_EXTI_ENABLE_RISING_EDGE(); -} - -/** - * @brief Handle the RCC LSE Clock Security System interrupt request. - * @retval None - */ -void HAL_RCCEx_LSECSS_IRQHandler(void) -{ - /* Check RCC LSE CSSF flag */ - if(__HAL_RCC_GET_IT(RCC_IT_LSECSS)) - { - /* RCC LSE Clock Security System interrupt user callback */ - HAL_RCCEx_LSECSS_Callback(); - - /* Clear RCC LSE CSS pending bit */ - __HAL_RCC_CLEAR_IT(RCC_IT_LSECSS); - } -} - -/** - * @brief RCCEx LSE Clock Security System interrupt callback. - * @retval none - */ -__weak void HAL_RCCEx_LSECSS_Callback(void) -{ - /* NOTE : This function should not be modified, when the callback is needed, - the @ref HAL_RCCEx_LSECSS_Callback should be implemented in the user file - */ -} - -/** - * @brief Select the Low Speed clock source to output on LSCO pin (PA2). - * @param LSCOSource specifies the Low Speed clock source to output. - * This parameter can be one of the following values: - * @arg @ref RCC_LSCOSOURCE_LSI LSI clock selected as LSCO source - * @arg @ref RCC_LSCOSOURCE_LSE LSE clock selected as LSCO source - * @retval None - */ -void HAL_RCCEx_EnableLSCO(uint32_t LSCOSource) -{ - GPIO_InitTypeDef GPIO_InitStruct; - FlagStatus pwrclkchanged = RESET; - FlagStatus backupchanged = RESET; - - /* Check the parameters */ - assert_param(IS_RCC_LSCOSOURCE(LSCOSource)); - - /* LSCO Pin Clock Enable */ - __LSCO_CLK_ENABLE(); - - /* Configure the LSCO pin in analog mode */ - GPIO_InitStruct.Pin = LSCO_PIN; - GPIO_InitStruct.Mode = GPIO_MODE_ANALOG; - GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; - GPIO_InitStruct.Pull = GPIO_NOPULL; - HAL_GPIO_Init(LSCO_GPIO_PORT, &GPIO_InitStruct); - - /* Update LSCOSEL clock source in Backup Domain control register */ - if(__HAL_RCC_PWR_IS_CLK_DISABLED()) - { - __HAL_RCC_PWR_CLK_ENABLE(); - pwrclkchanged = SET; - } - if(HAL_IS_BIT_CLR(PWR->CR1, PWR_CR1_DBP)) - { - HAL_PWR_EnableBkUpAccess(); - backupchanged = SET; - } - - MODIFY_REG(RCC->BDCR, RCC_BDCR_LSCOSEL | RCC_BDCR_LSCOEN, LSCOSource | RCC_BDCR_LSCOEN); - - if(backupchanged == SET) - { - HAL_PWR_DisableBkUpAccess(); - } - if(pwrclkchanged == SET) - { - __HAL_RCC_PWR_CLK_DISABLE(); - } -} - -/** - * @brief Disable the Low Speed clock output. - * @retval None - */ -void HAL_RCCEx_DisableLSCO(void) -{ - FlagStatus pwrclkchanged = RESET; - FlagStatus backupchanged = RESET; - - /* Update LSCOEN bit in Backup Domain control register */ - if(__HAL_RCC_PWR_IS_CLK_DISABLED()) - { - __HAL_RCC_PWR_CLK_ENABLE(); - pwrclkchanged = SET; - } - if(HAL_IS_BIT_CLR(PWR->CR1, PWR_CR1_DBP)) - { - /* Enable access to the backup domain */ - HAL_PWR_EnableBkUpAccess(); - backupchanged = SET; - } - - CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSCOEN); - - /* Restore previous configuration */ - if(backupchanged == SET) - { - /* Disable access to the backup domain */ - HAL_PWR_DisableBkUpAccess(); - } - if(pwrclkchanged == SET) - { - __HAL_RCC_PWR_CLK_DISABLE(); - } -} - -/** - * @brief Enable the PLL-mode of the MSI. - * @note Prior to enable the PLL-mode of the MSI for automatic hardware - * calibration LSE oscillator is to be enabled with HAL_RCC_OscConfig(). - * @retval None - */ -void HAL_RCCEx_EnableMSIPLLMode(void) -{ - SET_BIT(RCC->CR, RCC_CR_MSIPLLEN) ; -} - -/** - * @brief Disable the PLL-mode of the MSI. - * @note PLL-mode of the MSI is automatically reset when LSE oscillator is disabled. - * @retval None - */ -void HAL_RCCEx_DisableMSIPLLMode(void) -{ - CLEAR_BIT(RCC->CR, RCC_CR_MSIPLLEN) ; -} - -#if defined (OCTOSPI1) && defined (OCTOSPI2) -/** - * @brief Configure OCTOSPI instances DQS delays. - * @param Delay1 OCTOSPI1 DQS delay - * @param Delay2 OCTOSPI2 DQS delay - * @note Delay parameters stand for unitary delays from 0 to 15. Actual delay is Delay1 or Delay2 + 1. - * @retval None - */ -void HAL_RCCEx_OCTOSPIDelayConfig(uint32_t Delay1, uint32_t Delay2) -{ - assert_param(IS_RCC_OCTOSPIDELAY(Delay1)); - assert_param(IS_RCC_OCTOSPIDELAY(Delay2)); - - MODIFY_REG(RCC->DLYCFGR, RCC_DLYCFGR_OCTOSPI1_DLY|RCC_DLYCFGR_OCTOSPI2_DLY, (Delay1 | (Delay2 << RCC_DLYCFGR_OCTOSPI2_DLY_Pos))) ; -} -#endif /* OCTOSPI1 && OCTOSPI2 */ - -/** - * @} - */ - -#if defined(CRS) - -/** @defgroup RCCEx_Exported_Functions_Group3 Extended Clock Recovery System Control functions - * @brief Extended Clock Recovery System Control functions - * -@verbatim - =============================================================================== - ##### Extended Clock Recovery System Control functions ##### - =============================================================================== - [..] - For devices with Clock Recovery System feature (CRS), RCC Extension HAL driver can be used as follows: - - (#) In System clock config, HSI48 needs to be enabled - - (#) Enable CRS clock in IP MSP init which will use CRS functions - - (#) Call CRS functions as follows: - (##) Prepare synchronization configuration necessary for HSI48 calibration - (+++) Default values can be set for frequency Error Measurement (reload and error limit) - and also HSI48 oscillator smooth trimming. - (+++) Macro __HAL_RCC_CRS_RELOADVALUE_CALCULATE can be also used to calculate - directly reload value with target and sychronization frequencies values - (##) Call function HAL_RCCEx_CRSConfig which - (+++) Resets CRS registers to their default values. - (+++) Configures CRS registers with synchronization configuration - (+++) Enables automatic calibration and frequency error counter feature - Note: When using USB LPM (Link Power Management) and the device is in Sleep mode, the - periodic USB SOF will not be generated by the host. No SYNC signal will therefore be - provided to the CRS to calibrate the HSI48 on the run. To guarantee the required clock - precision after waking up from Sleep mode, the LSE or reference clock on the GPIOs - should be used as SYNC signal. - - (##) A polling function is provided to wait for complete synchronization - (+++) Call function HAL_RCCEx_CRSWaitSynchronization() - (+++) According to CRS status, user can decide to adjust again the calibration or continue - application if synchronization is OK - - (#) User can retrieve information related to synchronization in calling function - HAL_RCCEx_CRSGetSynchronizationInfo() - - (#) Regarding synchronization status and synchronization information, user can try a new calibration - in changing synchronization configuration and call again HAL_RCCEx_CRSConfig. - Note: When the SYNC event is detected during the downcounting phase (before reaching the zero value), - it means that the actual frequency is lower than the target (and so, that the TRIM value should be - incremented), while when it is detected during the upcounting phase it means that the actual frequency - is higher (and that the TRIM value should be decremented). - - (#) In interrupt mode, user can resort to the available macros (__HAL_RCC_CRS_XXX_IT). Interrupts will go - through CRS Handler (CRS_IRQn/CRS_IRQHandler) - (++) Call function HAL_RCCEx_CRSConfig() - (++) Enable CRS_IRQn (thanks to NVIC functions) - (++) Enable CRS interrupt (__HAL_RCC_CRS_ENABLE_IT) - (++) Implement CRS status management in the following user callbacks called from - HAL_RCCEx_CRS_IRQHandler(): - (+++) HAL_RCCEx_CRS_SyncOkCallback() - (+++) HAL_RCCEx_CRS_SyncWarnCallback() - (+++) HAL_RCCEx_CRS_ExpectedSyncCallback() - (+++) HAL_RCCEx_CRS_ErrorCallback() - - (#) To force a SYNC EVENT, user can use the function HAL_RCCEx_CRSSoftwareSynchronizationGenerate(). - This function can be called before calling HAL_RCCEx_CRSConfig (for instance in Systick handler) - -@endverbatim - * @{ - */ - -/** - * @brief Start automatic synchronization for polling mode - * @param pInit Pointer on RCC_CRSInitTypeDef structure - * @retval None - */ -void HAL_RCCEx_CRSConfig(RCC_CRSInitTypeDef *pInit) -{ - uint32_t value; /* no init needed */ - - /* Check the parameters */ - assert_param(IS_RCC_CRS_SYNC_DIV(pInit->Prescaler)); - assert_param(IS_RCC_CRS_SYNC_SOURCE(pInit->Source)); - assert_param(IS_RCC_CRS_SYNC_POLARITY(pInit->Polarity)); - assert_param(IS_RCC_CRS_RELOADVALUE(pInit->ReloadValue)); - assert_param(IS_RCC_CRS_ERRORLIMIT(pInit->ErrorLimitValue)); - assert_param(IS_RCC_CRS_HSI48CALIBRATION(pInit->HSI48CalibrationValue)); - - /* CONFIGURATION */ - - /* Before configuration, reset CRS registers to their default values*/ - __HAL_RCC_CRS_FORCE_RESET(); - __HAL_RCC_CRS_RELEASE_RESET(); - - /* Set the SYNCDIV[2:0] bits according to Prescaler value */ - /* Set the SYNCSRC[1:0] bits according to Source value */ - /* Set the SYNCSPOL bit according to Polarity value */ - value = (pInit->Prescaler | pInit->Source | pInit->Polarity); - /* Set the RELOAD[15:0] bits according to ReloadValue value */ - value |= pInit->ReloadValue; - /* Set the FELIM[7:0] bits according to ErrorLimitValue value */ - value |= (pInit->ErrorLimitValue << CRS_CFGR_FELIM_Pos); - WRITE_REG(CRS->CFGR, value); - - /* Adjust HSI48 oscillator smooth trimming */ - /* Set the TRIM[6:0] bits for STM32L412xx/L422xx or TRIM[5:0] bits otherwise - according to RCC_CRS_HSI48CalibrationValue value */ - MODIFY_REG(CRS->CR, CRS_CR_TRIM, (pInit->HSI48CalibrationValue << CRS_CR_TRIM_Pos)); - - /* START AUTOMATIC SYNCHRONIZATION*/ - - /* Enable Automatic trimming & Frequency error counter */ - SET_BIT(CRS->CR, CRS_CR_AUTOTRIMEN | CRS_CR_CEN); -} - -/** - * @brief Generate the software synchronization event - * @retval None - */ -void HAL_RCCEx_CRSSoftwareSynchronizationGenerate(void) -{ - SET_BIT(CRS->CR, CRS_CR_SWSYNC); -} - -/** - * @brief Return synchronization info - * @param pSynchroInfo Pointer on RCC_CRSSynchroInfoTypeDef structure - * @retval None - */ -void HAL_RCCEx_CRSGetSynchronizationInfo(RCC_CRSSynchroInfoTypeDef *pSynchroInfo) -{ - /* Check the parameter */ - assert_param(pSynchroInfo != (void *)NULL); - - /* Get the reload value */ - pSynchroInfo->ReloadValue = (READ_BIT(CRS->CFGR, CRS_CFGR_RELOAD)); - - /* Get HSI48 oscillator smooth trimming */ - pSynchroInfo->HSI48CalibrationValue = (READ_BIT(CRS->CR, CRS_CR_TRIM) >> CRS_CR_TRIM_Pos); - - /* Get Frequency error capture */ - pSynchroInfo->FreqErrorCapture = (READ_BIT(CRS->ISR, CRS_ISR_FECAP) >> CRS_ISR_FECAP_Pos); - - /* Get Frequency error direction */ - pSynchroInfo->FreqErrorDirection = (READ_BIT(CRS->ISR, CRS_ISR_FEDIR)); -} - -/** -* @brief Wait for CRS Synchronization status. -* @param Timeout Duration of the timeout -* @note Timeout is based on the maximum time to receive a SYNC event based on synchronization -* frequency. -* @note If Timeout set to HAL_MAX_DELAY, HAL_TIMEOUT will be never returned. -* @retval Combination of Synchronization status -* This parameter can be a combination of the following values: -* @arg @ref RCC_CRS_TIMEOUT -* @arg @ref RCC_CRS_SYNCOK -* @arg @ref RCC_CRS_SYNCWARN -* @arg @ref RCC_CRS_SYNCERR -* @arg @ref RCC_CRS_SYNCMISS -* @arg @ref RCC_CRS_TRIMOVF -*/ -uint32_t HAL_RCCEx_CRSWaitSynchronization(uint32_t Timeout) -{ - uint32_t crsstatus = RCC_CRS_NONE; - uint32_t tickstart; - - /* Get timeout */ - tickstart = HAL_GetTick(); - - /* Wait for CRS flag or timeout detection */ - do - { - if(Timeout != HAL_MAX_DELAY) - { - if(((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U)) - { - crsstatus = RCC_CRS_TIMEOUT; - } - } - /* Check CRS SYNCOK flag */ - if(__HAL_RCC_CRS_GET_FLAG(RCC_CRS_FLAG_SYNCOK)) - { - /* CRS SYNC event OK */ - crsstatus |= RCC_CRS_SYNCOK; - - /* Clear CRS SYNC event OK bit */ - __HAL_RCC_CRS_CLEAR_FLAG(RCC_CRS_FLAG_SYNCOK); - } - - /* Check CRS SYNCWARN flag */ - if(__HAL_RCC_CRS_GET_FLAG(RCC_CRS_FLAG_SYNCWARN)) - { - /* CRS SYNC warning */ - crsstatus |= RCC_CRS_SYNCWARN; - - /* Clear CRS SYNCWARN bit */ - __HAL_RCC_CRS_CLEAR_FLAG(RCC_CRS_FLAG_SYNCWARN); - } - - /* Check CRS TRIM overflow flag */ - if(__HAL_RCC_CRS_GET_FLAG(RCC_CRS_FLAG_TRIMOVF)) - { - /* CRS SYNC Error */ - crsstatus |= RCC_CRS_TRIMOVF; - - /* Clear CRS Error bit */ - __HAL_RCC_CRS_CLEAR_FLAG(RCC_CRS_FLAG_TRIMOVF); - } - - /* Check CRS Error flag */ - if(__HAL_RCC_CRS_GET_FLAG(RCC_CRS_FLAG_SYNCERR)) - { - /* CRS SYNC Error */ - crsstatus |= RCC_CRS_SYNCERR; - - /* Clear CRS Error bit */ - __HAL_RCC_CRS_CLEAR_FLAG(RCC_CRS_FLAG_SYNCERR); - } - - /* Check CRS SYNC Missed flag */ - if(__HAL_RCC_CRS_GET_FLAG(RCC_CRS_FLAG_SYNCMISS)) - { - /* CRS SYNC Missed */ - crsstatus |= RCC_CRS_SYNCMISS; - - /* Clear CRS SYNC Missed bit */ - __HAL_RCC_CRS_CLEAR_FLAG(RCC_CRS_FLAG_SYNCMISS); - } - - /* Check CRS Expected SYNC flag */ - if(__HAL_RCC_CRS_GET_FLAG(RCC_CRS_FLAG_ESYNC)) - { - /* frequency error counter reached a zero value */ - __HAL_RCC_CRS_CLEAR_FLAG(RCC_CRS_FLAG_ESYNC); - } - } while(RCC_CRS_NONE == crsstatus); - - return crsstatus; -} - -/** - * @brief Handle the Clock Recovery System interrupt request. - * @retval None - */ -void HAL_RCCEx_CRS_IRQHandler(void) -{ - uint32_t crserror = RCC_CRS_NONE; - /* Get current IT flags and IT sources values */ - uint32_t itflags = READ_REG(CRS->ISR); - uint32_t itsources = READ_REG(CRS->CR); - - /* Check CRS SYNCOK flag */ - if(((itflags & RCC_CRS_FLAG_SYNCOK) != 0U) && ((itsources & RCC_CRS_IT_SYNCOK) != 0U)) - { - /* Clear CRS SYNC event OK flag */ - WRITE_REG(CRS->ICR, CRS_ICR_SYNCOKC); - - /* user callback */ - HAL_RCCEx_CRS_SyncOkCallback(); - } - /* Check CRS SYNCWARN flag */ - else if(((itflags & RCC_CRS_FLAG_SYNCWARN) != 0U) && ((itsources & RCC_CRS_IT_SYNCWARN) != 0U)) - { - /* Clear CRS SYNCWARN flag */ - WRITE_REG(CRS->ICR, CRS_ICR_SYNCWARNC); - - /* user callback */ - HAL_RCCEx_CRS_SyncWarnCallback(); - } - /* Check CRS Expected SYNC flag */ - else if(((itflags & RCC_CRS_FLAG_ESYNC) != 0U) && ((itsources & RCC_CRS_IT_ESYNC) != 0U)) - { - /* frequency error counter reached a zero value */ - WRITE_REG(CRS->ICR, CRS_ICR_ESYNCC); - - /* user callback */ - HAL_RCCEx_CRS_ExpectedSyncCallback(); - } - /* Check CRS Error flags */ - else - { - if(((itflags & RCC_CRS_FLAG_ERR) != 0U) && ((itsources & RCC_CRS_IT_ERR) != 0U)) - { - if((itflags & RCC_CRS_FLAG_SYNCERR) != 0U) - { - crserror |= RCC_CRS_SYNCERR; - } - if((itflags & RCC_CRS_FLAG_SYNCMISS) != 0U) - { - crserror |= RCC_CRS_SYNCMISS; - } - if((itflags & RCC_CRS_FLAG_TRIMOVF) != 0U) - { - crserror |= RCC_CRS_TRIMOVF; - } - - /* Clear CRS Error flags */ - WRITE_REG(CRS->ICR, CRS_ICR_ERRC); - - /* user error callback */ - HAL_RCCEx_CRS_ErrorCallback(crserror); - } - } -} - -/** - * @brief RCCEx Clock Recovery System SYNCOK interrupt callback. - * @retval none - */ -__weak void HAL_RCCEx_CRS_SyncOkCallback(void) -{ - /* NOTE : This function should not be modified, when the callback is needed, - the @ref HAL_RCCEx_CRS_SyncOkCallback should be implemented in the user file - */ -} - -/** - * @brief RCCEx Clock Recovery System SYNCWARN interrupt callback. - * @retval none - */ -__weak void HAL_RCCEx_CRS_SyncWarnCallback(void) -{ - /* NOTE : This function should not be modified, when the callback is needed, - the @ref HAL_RCCEx_CRS_SyncWarnCallback should be implemented in the user file - */ -} - -/** - * @brief RCCEx Clock Recovery System Expected SYNC interrupt callback. - * @retval none - */ -__weak void HAL_RCCEx_CRS_ExpectedSyncCallback(void) -{ - /* NOTE : This function should not be modified, when the callback is needed, - the @ref HAL_RCCEx_CRS_ExpectedSyncCallback should be implemented in the user file - */ -} - -/** - * @brief RCCEx Clock Recovery System Error interrupt callback. - * @param Error Combination of Error status. - * This parameter can be a combination of the following values: - * @arg @ref RCC_CRS_SYNCERR - * @arg @ref RCC_CRS_SYNCMISS - * @arg @ref RCC_CRS_TRIMOVF - * @retval none - */ -__weak void HAL_RCCEx_CRS_ErrorCallback(uint32_t Error) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(Error); - - /* NOTE : This function should not be modified, when the callback is needed, - the @ref HAL_RCCEx_CRS_ErrorCallback should be implemented in the user file - */ -} - -/** - * @} - */ - -#endif /* CRS */ - -/** - * @} - */ - -/** @addtogroup RCCEx_Private_Functions - * @{ - */ - -#if defined(RCC_PLLSAI1_SUPPORT) - -/** - * @brief Configure the parameters N & P & optionally M of PLLSAI1 and enable PLLSAI1 output clock(s). - * @param PllSai1 pointer to an RCC_PLLSAI1InitTypeDef structure that - * contains the configuration parameters N & P & optionally M as well as PLLSAI1 output clock(s) - * @param Divider divider parameter to be updated - * - * @note PLLSAI1 is temporary disable to apply new parameters - * - * @retval HAL status - */ -static HAL_StatusTypeDef RCCEx_PLLSAI1_Config(RCC_PLLSAI1InitTypeDef *PllSai1, uint32_t Divider) -{ - uint32_t tickstart; - HAL_StatusTypeDef status = HAL_OK; - - /* check for PLLSAI1 Parameters used to output PLLSAI1CLK */ - /* P, Q and R dividers are verified in each specific divider case below */ - assert_param(IS_RCC_PLLSAI1SOURCE(PllSai1->PLLSAI1Source)); - assert_param(IS_RCC_PLLSAI1M_VALUE(PllSai1->PLLSAI1M)); - assert_param(IS_RCC_PLLSAI1N_VALUE(PllSai1->PLLSAI1N)); - assert_param(IS_RCC_PLLSAI1CLOCKOUT_VALUE(PllSai1->PLLSAI1ClockOut)); - - /* Check that PLLSAI1 clock source and divider M can be applied */ - if(__HAL_RCC_GET_PLL_OSCSOURCE() != RCC_PLLSOURCE_NONE) - { - /* PLL clock source and divider M already set, check that no request for change */ - if((__HAL_RCC_GET_PLL_OSCSOURCE() != PllSai1->PLLSAI1Source) - || - (PllSai1->PLLSAI1Source == RCC_PLLSOURCE_NONE) -#if !defined(RCC_PLLSAI1M_DIV_1_16_SUPPORT) - || - (((READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLM) >> RCC_PLLCFGR_PLLM_Pos) + 1U) != PllSai1->PLLSAI1M) -#endif - ) - { - status = HAL_ERROR; - } - } - else - { - /* Check PLLSAI1 clock source availability */ - switch(PllSai1->PLLSAI1Source) - { - case RCC_PLLSOURCE_MSI: - if(HAL_IS_BIT_CLR(RCC->CR, RCC_CR_MSIRDY)) - { - status = HAL_ERROR; - } - break; - case RCC_PLLSOURCE_HSI: - if(HAL_IS_BIT_CLR(RCC->CR, RCC_CR_HSIRDY)) - { - status = HAL_ERROR; - } - break; - case RCC_PLLSOURCE_HSE: - if(HAL_IS_BIT_CLR(RCC->CR, RCC_CR_HSERDY)) - { - if(HAL_IS_BIT_CLR(RCC->CR, RCC_CR_HSEBYP)) - { - status = HAL_ERROR; - } - } - break; - default: - status = HAL_ERROR; - break; - } - - if(status == HAL_OK) - { -#if defined(RCC_PLLSAI1M_DIV_1_16_SUPPORT) - /* Set PLLSAI1 clock source */ - MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC, PllSai1->PLLSAI1Source); -#else - /* Set PLLSAI1 clock source and divider M */ - MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC | RCC_PLLCFGR_PLLM, PllSai1->PLLSAI1Source | (PllSai1->PLLSAI1M - 1U) << RCC_PLLCFGR_PLLM_Pos); -#endif - } - } - - if(status == HAL_OK) - { - /* Disable the PLLSAI1 */ - __HAL_RCC_PLLSAI1_DISABLE(); - - /* Get Start Tick*/ - tickstart = HAL_GetTick(); - - /* Wait till PLLSAI1 is ready to be updated */ - while(READ_BIT(RCC->CR, RCC_CR_PLLSAI1RDY) != 0U) - { - if((HAL_GetTick() - tickstart) > PLLSAI1_TIMEOUT_VALUE) - { - status = HAL_TIMEOUT; - break; - } - } - - if(status == HAL_OK) - { - if(Divider == DIVIDER_P_UPDATE) - { - assert_param(IS_RCC_PLLSAI1P_VALUE(PllSai1->PLLSAI1P)); -#if defined(RCC_PLLSAI1M_DIV_1_16_SUPPORT) - - /* Configure the PLLSAI1 Division factor M, P and Multiplication factor N*/ -#if defined(RCC_PLLSAI1P_DIV_2_31_SUPPORT) - MODIFY_REG(RCC->PLLSAI1CFGR, - RCC_PLLSAI1CFGR_PLLSAI1N | RCC_PLLSAI1CFGR_PLLSAI1PDIV | RCC_PLLSAI1CFGR_PLLSAI1M, - (PllSai1->PLLSAI1N << RCC_PLLSAI1CFGR_PLLSAI1N_Pos) | - (PllSai1->PLLSAI1P << RCC_PLLSAI1CFGR_PLLSAI1PDIV_Pos) | - ((PllSai1->PLLSAI1M - 1U) << RCC_PLLSAI1CFGR_PLLSAI1M_Pos)); -#else - MODIFY_REG(RCC->PLLSAI1CFGR, - RCC_PLLSAI1CFGR_PLLSAI1N | RCC_PLLSAI1CFGR_PLLSAI1P | RCC_PLLSAI1CFGR_PLLSAI1M, - (PllSai1->PLLSAI1N << RCC_PLLSAI1CFGR_PLLSAI1N_Pos) | - ((PllSai1->PLLSAI1P >> 4U) << RCC_PLLSAI1CFGR_PLLSAI1P_Pos) | - ((PllSai1->PLLSAI1M - 1U) << RCC_PLLSAI1CFGR_PLLSAI1M_Pos)); -#endif /* RCC_PLLSAI1P_DIV_2_31_SUPPORT */ - -#else - /* Configure the PLLSAI1 Division factor P and Multiplication factor N*/ -#if defined(RCC_PLLSAI1P_DIV_2_31_SUPPORT) - MODIFY_REG(RCC->PLLSAI1CFGR, - RCC_PLLSAI1CFGR_PLLSAI1N | RCC_PLLSAI1CFGR_PLLSAI1PDIV, - (PllSai1->PLLSAI1N << RCC_PLLSAI1CFGR_PLLSAI1N_Pos) | - (PllSai1->PLLSAI1P << RCC_PLLSAI1CFGR_PLLSAI1PDIV_Pos)); -#else - MODIFY_REG(RCC->PLLSAI1CFGR, - RCC_PLLSAI1CFGR_PLLSAI1N | RCC_PLLSAI1CFGR_PLLSAI1P, - (PllSai1->PLLSAI1N << RCC_PLLSAI1CFGR_PLLSAI1N_Pos) | - ((PllSai1->PLLSAI1P >> 4U) << RCC_PLLSAI1CFGR_PLLSAI1P_Pos)); -#endif /* RCC_PLLSAI1P_DIV_2_31_SUPPORT */ - -#endif /* RCC_PLLSAI1M_DIV_1_16_SUPPORT */ - } - else if(Divider == DIVIDER_Q_UPDATE) - { - assert_param(IS_RCC_PLLSAI1Q_VALUE(PllSai1->PLLSAI1Q)); -#if defined(RCC_PLLSAI1M_DIV_1_16_SUPPORT) - /* Configure the PLLSAI1 Division factor M, Q and Multiplication factor N*/ - MODIFY_REG(RCC->PLLSAI1CFGR, - RCC_PLLSAI1CFGR_PLLSAI1N | RCC_PLLSAI1CFGR_PLLSAI1Q | RCC_PLLSAI1CFGR_PLLSAI1M, - (PllSai1->PLLSAI1N << RCC_PLLSAI1CFGR_PLLSAI1N_Pos) | - (((PllSai1->PLLSAI1Q >> 1U) - 1U) << RCC_PLLSAI1CFGR_PLLSAI1Q_Pos) | - ((PllSai1->PLLSAI1M - 1U) << RCC_PLLSAI1CFGR_PLLSAI1M_Pos)); -#else - /* Configure the PLLSAI1 Division factor Q and Multiplication factor N*/ - MODIFY_REG(RCC->PLLSAI1CFGR, - RCC_PLLSAI1CFGR_PLLSAI1N | RCC_PLLSAI1CFGR_PLLSAI1Q, - (PllSai1->PLLSAI1N << RCC_PLLSAI1CFGR_PLLSAI1N_Pos) | - (((PllSai1->PLLSAI1Q >> 1U) - 1U) << RCC_PLLSAI1CFGR_PLLSAI1Q_Pos)); -#endif /* RCC_PLLSAI1M_DIV_1_16_SUPPORT */ - } - else - { - assert_param(IS_RCC_PLLSAI1R_VALUE(PllSai1->PLLSAI1R)); -#if defined(RCC_PLLSAI1M_DIV_1_16_SUPPORT) - /* Configure the PLLSAI1 Division factor M, R and Multiplication factor N*/ - MODIFY_REG(RCC->PLLSAI1CFGR, - RCC_PLLSAI1CFGR_PLLSAI1N | RCC_PLLSAI1CFGR_PLLSAI1R | RCC_PLLSAI1CFGR_PLLSAI1M, - (PllSai1->PLLSAI1N << RCC_PLLSAI1CFGR_PLLSAI1N_Pos) | - (((PllSai1->PLLSAI1R >> 1U) - 1U) << RCC_PLLSAI1CFGR_PLLSAI1R_Pos) | - ((PllSai1->PLLSAI1M - 1U) << RCC_PLLSAI1CFGR_PLLSAI1M_Pos)); -#else - /* Configure the PLLSAI1 Division factor R and Multiplication factor N*/ - MODIFY_REG(RCC->PLLSAI1CFGR, - RCC_PLLSAI1CFGR_PLLSAI1N | RCC_PLLSAI1CFGR_PLLSAI1R, - (PllSai1->PLLSAI1N << RCC_PLLSAI1CFGR_PLLSAI1N_Pos) | - (((PllSai1->PLLSAI1R >> 1U) - 1U) << RCC_PLLSAI1CFGR_PLLSAI1R_Pos)); -#endif /* RCC_PLLSAI1M_DIV_1_16_SUPPORT */ - } - - /* Enable the PLLSAI1 again by setting PLLSAI1ON to 1*/ - __HAL_RCC_PLLSAI1_ENABLE(); - - /* Get Start Tick*/ - tickstart = HAL_GetTick(); - - /* Wait till PLLSAI1 is ready */ - while(READ_BIT(RCC->CR, RCC_CR_PLLSAI1RDY) == 0U) - { - if((HAL_GetTick() - tickstart) > PLLSAI1_TIMEOUT_VALUE) - { - status = HAL_TIMEOUT; - break; - } - } - - if(status == HAL_OK) - { - /* Configure the PLLSAI1 Clock output(s) */ - __HAL_RCC_PLLSAI1CLKOUT_ENABLE(PllSai1->PLLSAI1ClockOut); - } - } - } - - return status; -} - -#endif /* RCC_PLLSAI1_SUPPORT */ - -#if defined(RCC_PLLSAI2_SUPPORT) - -/** - * @brief Configure the parameters N & P & optionally M of PLLSAI2 and enable PLLSAI2 output clock(s). - * @param PllSai2 pointer to an RCC_PLLSAI2InitTypeDef structure that - * contains the configuration parameters N & P & optionally M as well as PLLSAI2 output clock(s) - * @param Divider divider parameter to be updated - * - * @note PLLSAI2 is temporary disable to apply new parameters - * - * @retval HAL status - */ -static HAL_StatusTypeDef RCCEx_PLLSAI2_Config(RCC_PLLSAI2InitTypeDef *PllSai2, uint32_t Divider) -{ - uint32_t tickstart; - HAL_StatusTypeDef status = HAL_OK; - - /* check for PLLSAI2 Parameters used to output PLLSAI2CLK */ - /* P, Q and R dividers are verified in each specific divider case below */ - assert_param(IS_RCC_PLLSAI2SOURCE(PllSai2->PLLSAI2Source)); - assert_param(IS_RCC_PLLSAI2M_VALUE(PllSai2->PLLSAI2M)); - assert_param(IS_RCC_PLLSAI2N_VALUE(PllSai2->PLLSAI2N)); - assert_param(IS_RCC_PLLSAI2CLOCKOUT_VALUE(PllSai2->PLLSAI2ClockOut)); - - /* Check that PLLSAI2 clock source and divider M can be applied */ - if(__HAL_RCC_GET_PLL_OSCSOURCE() != RCC_PLLSOURCE_NONE) - { - /* PLL clock source and divider M already set, check that no request for change */ - if((__HAL_RCC_GET_PLL_OSCSOURCE() != PllSai2->PLLSAI2Source) - || - (PllSai2->PLLSAI2Source == RCC_PLLSOURCE_NONE) -#if !defined(RCC_PLLSAI2M_DIV_1_16_SUPPORT) - || - (((READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLM) >> RCC_PLLCFGR_PLLM_Pos) + 1U) != PllSai2->PLLSAI2M) -#endif - ) - { - status = HAL_ERROR; - } - } - else - { - /* Check PLLSAI2 clock source availability */ - switch(PllSai2->PLLSAI2Source) - { - case RCC_PLLSOURCE_MSI: - if(HAL_IS_BIT_CLR(RCC->CR, RCC_CR_MSIRDY)) - { - status = HAL_ERROR; - } - break; - case RCC_PLLSOURCE_HSI: - if(HAL_IS_BIT_CLR(RCC->CR, RCC_CR_HSIRDY)) - { - status = HAL_ERROR; - } - break; - case RCC_PLLSOURCE_HSE: - if(HAL_IS_BIT_CLR(RCC->CR, RCC_CR_HSERDY)) - { - if(HAL_IS_BIT_CLR(RCC->CR, RCC_CR_HSEBYP)) - { - status = HAL_ERROR; - } - } - break; - default: - status = HAL_ERROR; - break; - } - - if(status == HAL_OK) - { -#if defined(RCC_PLLSAI2M_DIV_1_16_SUPPORT) - /* Set PLLSAI2 clock source */ - MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC, PllSai2->PLLSAI2Source); -#else - /* Set PLLSAI2 clock source and divider M */ - MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC | RCC_PLLCFGR_PLLM, PllSai2->PLLSAI2Source | (PllSai2->PLLSAI2M - 1U) << RCC_PLLCFGR_PLLM_Pos); -#endif - } - } - - if(status == HAL_OK) - { - /* Disable the PLLSAI2 */ - __HAL_RCC_PLLSAI2_DISABLE(); - - /* Get Start Tick*/ - tickstart = HAL_GetTick(); - - /* Wait till PLLSAI2 is ready to be updated */ - while(READ_BIT(RCC->CR, RCC_CR_PLLSAI2RDY) != 0U) - { - if((HAL_GetTick() - tickstart) > PLLSAI2_TIMEOUT_VALUE) - { - status = HAL_TIMEOUT; - break; - } - } - - if(status == HAL_OK) - { - if(Divider == DIVIDER_P_UPDATE) - { - assert_param(IS_RCC_PLLSAI2P_VALUE(PllSai2->PLLSAI2P)); -#if defined(RCC_PLLSAI2M_DIV_1_16_SUPPORT) - - /* Configure the PLLSAI2 Division factor M, P and Multiplication factor N*/ -#if defined(RCC_PLLSAI2P_DIV_2_31_SUPPORT) - MODIFY_REG(RCC->PLLSAI2CFGR, - RCC_PLLSAI2CFGR_PLLSAI2N | RCC_PLLSAI2CFGR_PLLSAI2PDIV | RCC_PLLSAI2CFGR_PLLSAI2M, - (PllSai2->PLLSAI2N << RCC_PLLSAI2CFGR_PLLSAI2N_Pos) | - (PllSai2->PLLSAI2P << RCC_PLLSAI2CFGR_PLLSAI2PDIV_Pos) | - ((PllSai2->PLLSAI2M - 1U) << RCC_PLLSAI2CFGR_PLLSAI2M_Pos)); -#else - MODIFY_REG(RCC->PLLSAI2CFGR, - RCC_PLLSAI2CFGR_PLLSAI2N | RCC_PLLSAI2CFGR_PLLSAI2P | RCC_PLLSAI2CFGR_PLLSAI2M, - (PllSai2->PLLSAI2N << RCC_PLLSAI2CFGR_PLLSAI2N_Pos) | - ((PllSai2->PLLSAI2P >> 4U) << RCC_PLLSAI2CFGR_PLLSAI2P_Pos) | - ((PllSai2->PLLSAI2M - 1U) << RCC_PLLSAI2CFGR_PLLSAI2M_Pos)); -#endif /* RCC_PLLSAI2P_DIV_2_31_SUPPORT */ - -#else - /* Configure the PLLSAI2 Division factor P and Multiplication factor N*/ -#if defined(RCC_PLLSAI2P_DIV_2_31_SUPPORT) - MODIFY_REG(RCC->PLLSAI2CFGR, - RCC_PLLSAI2CFGR_PLLSAI2N | RCC_PLLSAI2CFGR_PLLSAI2PDIV, - (PllSai2->PLLSAI2N << RCC_PLLSAI2CFGR_PLLSAI2N_Pos) | - (PllSai2->PLLSAI2P << RCC_PLLSAI2CFGR_PLLSAI2PDIV_Pos)); -#else - MODIFY_REG(RCC->PLLSAI2CFGR, - RCC_PLLSAI2CFGR_PLLSAI2N | RCC_PLLSAI2CFGR_PLLSAI2P, - (PllSai2->PLLSAI2N << RCC_PLLSAI2CFGR_PLLSAI2N_Pos) | - ((PllSai2->PLLSAI2P >> 4U) << RCC_PLLSAI2CFGR_PLLSAI2P_Pos)); -#endif /* RCC_PLLSAI2P_DIV_2_31_SUPPORT */ - -#endif /* RCC_PLLSAI2M_DIV_1_16_SUPPORT */ - } -#if defined(RCC_PLLSAI2Q_DIV_SUPPORT) - else if(Divider == DIVIDER_Q_UPDATE) - { - assert_param(IS_RCC_PLLSAI2Q_VALUE(PllSai2->PLLSAI2Q)); -#if defined(RCC_PLLSAI2M_DIV_1_16_SUPPORT) - /* Configure the PLLSAI2 Division factor M, Q and Multiplication factor N*/ - MODIFY_REG(RCC->PLLSAI2CFGR, - RCC_PLLSAI2CFGR_PLLSAI2N | RCC_PLLSAI2CFGR_PLLSAI2Q | RCC_PLLSAI2CFGR_PLLSAI2M, - (PllSai2->PLLSAI2N << RCC_PLLSAI2CFGR_PLLSAI2N_Pos) | - (((PllSai2->PLLSAI2Q >> 1U) - 1U) << RCC_PLLSAI2CFGR_PLLSAI2Q_Pos) | - ((PllSai2->PLLSAI2M - 1U) << RCC_PLLSAI2CFGR_PLLSAI2M_Pos)); -#else - /* Configure the PLLSAI2 Division factor Q and Multiplication factor N*/ - MODIFY_REG(RCC->PLLSAI2CFGR, - RCC_PLLSAI2CFGR_PLLSAI2N | RCC_PLLSAI2CFGR_PLLSAI2Q, - (PllSai2->PLLSAI2N << RCC_PLLSAI2CFGR_PLLSAI2N_Pos) | - (((PllSai2->PLLSAI2Q >> 1U) - 1U) << RCC_PLLSAI2CFGR_PLLSAI2Q_Pos)); -#endif /* RCC_PLLSAI2M_DIV_1_16_SUPPORT */ - } -#endif /* RCC_PLLSAI2Q_DIV_SUPPORT */ - else - { - assert_param(IS_RCC_PLLSAI2R_VALUE(PllSai2->PLLSAI2R)); -#if defined(RCC_PLLSAI2M_DIV_1_16_SUPPORT) - /* Configure the PLLSAI2 Division factor M, R and Multiplication factor N*/ - MODIFY_REG(RCC->PLLSAI2CFGR, - RCC_PLLSAI2CFGR_PLLSAI2N | RCC_PLLSAI2CFGR_PLLSAI2R | RCC_PLLSAI2CFGR_PLLSAI2M, - (PllSai2->PLLSAI2N << RCC_PLLSAI2CFGR_PLLSAI2N_Pos) | - (((PllSai2->PLLSAI2R >> 1U) - 1U) << RCC_PLLSAI2CFGR_PLLSAI2R_Pos) | - ((PllSai2->PLLSAI2M - 1U) << RCC_PLLSAI2CFGR_PLLSAI2M_Pos)); -#else - /* Configure the PLLSAI2 Division factor R and Multiplication factor N*/ - MODIFY_REG(RCC->PLLSAI2CFGR, - RCC_PLLSAI2CFGR_PLLSAI2N | RCC_PLLSAI2CFGR_PLLSAI2R, - (PllSai2->PLLSAI2N << RCC_PLLSAI2CFGR_PLLSAI2N_Pos) | - (((PllSai2->PLLSAI2R >> 1U) - 1U) << RCC_PLLSAI2CFGR_PLLSAI2R_Pos)); -#endif /* RCC_PLLSAI2M_DIV_1_16_SUPPORT */ - } - - /* Enable the PLLSAI2 again by setting PLLSAI2ON to 1*/ - __HAL_RCC_PLLSAI2_ENABLE(); - - /* Get Start Tick*/ - tickstart = HAL_GetTick(); - - /* Wait till PLLSAI2 is ready */ - while(READ_BIT(RCC->CR, RCC_CR_PLLSAI2RDY) == 0U) - { - if((HAL_GetTick() - tickstart) > PLLSAI2_TIMEOUT_VALUE) - { - status = HAL_TIMEOUT; - break; - } - } - - if(status == HAL_OK) - { - /* Configure the PLLSAI2 Clock output(s) */ - __HAL_RCC_PLLSAI2CLKOUT_ENABLE(PllSai2->PLLSAI2ClockOut); - } - } - } - - return status; -} - -#endif /* RCC_PLLSAI2_SUPPORT */ - -#if defined(SAI1) - -static uint32_t RCCEx_GetSAIxPeriphCLKFreq(uint32_t PeriphClk, uint32_t InputFrequency) -{ - uint32_t frequency = 0U; - uint32_t srcclk = 0U; - uint32_t pllvco, plln; /* no init needed */ -#if defined(RCC_PLLP_SUPPORT) - uint32_t pllp = 0U; -#endif /* RCC_PLLP_SUPPORT */ - - /* Handle SAIs */ - if(PeriphClk == RCC_PERIPHCLK_SAI1) - { - srcclk = __HAL_RCC_GET_SAI1_SOURCE(); - if(srcclk == RCC_SAI1CLKSOURCE_PIN) - { - frequency = EXTERNAL_SAI1_CLOCK_VALUE; - } - /* Else, PLL clock output to check below */ - } -#if defined(SAI2) - else - { - if(PeriphClk == RCC_PERIPHCLK_SAI2) - { - srcclk = __HAL_RCC_GET_SAI2_SOURCE(); - if(srcclk == RCC_SAI2CLKSOURCE_PIN) - { - frequency = EXTERNAL_SAI2_CLOCK_VALUE; - } - /* Else, PLL clock output to check below */ - } - } -#endif /* SAI2 */ - - if(frequency == 0U) - { - pllvco = InputFrequency; - -#if defined(SAI2) - if((srcclk == RCC_SAI1CLKSOURCE_PLL) || (srcclk == RCC_SAI2CLKSOURCE_PLL)) - { - if(HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLLRDY) && (__HAL_RCC_GET_PLLCLKOUT_CONFIG(RCC_PLL_SAI3CLK) != 0U)) - { - /* f(PLL Source) / PLLM */ - pllvco = (pllvco / ((READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLM) >> RCC_PLLCFGR_PLLM_Pos) + 1U)); - /* f(PLLSAI3CLK) = f(VCO input) * PLLN / PLLP */ - plln = READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLN) >> RCC_PLLCFGR_PLLN_Pos; -#if defined(RCC_PLLP_DIV_2_31_SUPPORT) - pllp = READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLPDIV) >> RCC_PLLCFGR_PLLPDIV_Pos; -#endif - if(pllp == 0U) - { - if(READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLP) != 0U) - { - pllp = 17U; - } - else - { - pllp = 7U; - } - } - frequency = (pllvco * plln) / pllp; - } - } - else if(srcclk == 0U) /* RCC_SAI1CLKSOURCE_PLLSAI1 || RCC_SAI2CLKSOURCE_PLLSAI1 */ - { - if(HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLLSAI1RDY) && (__HAL_RCC_GET_PLLSAI1CLKOUT_CONFIG(RCC_PLLSAI1_SAI1CLK) != 0U)) - { -#if defined(RCC_PLLSAI1M_DIV_1_16_SUPPORT) - /* PLLSAI1M exists: apply PLLSAI1M divider for PLLSAI1 output computation */ - /* f(PLLSAI1 Source) / PLLSAI1M */ - pllvco = (pllvco / ((READ_BIT(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1M) >> RCC_PLLSAI1CFGR_PLLSAI1M_Pos) + 1U)); -#else - /* f(PLL Source) / PLLM */ - pllvco = (pllvco / ((READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLM) >> RCC_PLLCFGR_PLLM_Pos) + 1U)); -#endif - /* f(PLLSAI1CLK) = f(VCOSAI1 input) * PLLSAI1N / PLLSAI1P */ - plln = READ_BIT(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1N) >> RCC_PLLSAI1CFGR_PLLSAI1N_Pos; -#if defined(RCC_PLLSAI1P_DIV_2_31_SUPPORT) - pllp = READ_BIT(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1PDIV) >> RCC_PLLSAI1CFGR_PLLSAI1PDIV_Pos; -#endif - if(pllp == 0U) - { - if(READ_BIT(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1P) != 0U) - { - pllp = 17U; - } - else - { - pllp = 7U; - } - } - frequency = (pllvco * plln) / pllp; - } - } -#if defined(STM32L4P5xx) || defined(STM32L4Q5xx) || defined(STM32L4R5xx) || defined(STM32L4R7xx) || defined(STM32L4R9xx) || defined(STM32L4S5xx) || defined(STM32L4S7xx) || defined(STM32L4S9xx) - else if((srcclk == RCC_SAI1CLKSOURCE_HSI) || (srcclk == RCC_SAI2CLKSOURCE_HSI)) - { - if(HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSIRDY)) - { - frequency = HSI_VALUE; - } - } -#endif /* STM32L4P5xx || STM32L4Q5xx || STM32L4R5xx || STM32L4R7xx || STM32L4R9xx || STM32L4S5xx || STM32L4S7xx || STM32L4S9xx */ - -#else - if(srcclk == RCC_SAI1CLKSOURCE_PLL) - { - if(HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLLRDY) && (__HAL_RCC_GET_PLLCLKOUT_CONFIG(RCC_PLL_SAI2CLK) != 0U)) - { - /* f(PLL Source) / PLLM */ - pllvco = (pllvco / ((READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLM) >> RCC_PLLCFGR_PLLM_Pos) + 1U)); - /* f(PLLSAI2CLK) = f(VCO input) * PLLN / PLLP */ - plln = READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLN) >> RCC_PLLCFGR_PLLN_Pos; -#if defined(RCC_PLLP_DIV_2_31_SUPPORT) - pllp = READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLPDIV) >> RCC_PLLCFGR_PLLPDIV_Pos; -#endif - if(pllp == 0U) - { - if(READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLP) != 0U) - { - pllp = 17U; - } - else - { - pllp = 7U; - } - } - frequency = (pllvco * plln) / pllp; - } - else if(HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSIRDY)) - { - /* HSI automatically selected as clock source if PLLs not enabled */ - frequency = HSI_VALUE; - } - else - { - /* No clock source, frequency default init at 0 */ - } - } - else if(srcclk == RCC_SAI1CLKSOURCE_PLLSAI1) - { - if(HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLLSAI1RDY) && (__HAL_RCC_GET_PLLSAI1CLKOUT_CONFIG(RCC_PLLSAI1_SAI1CLK) != 0U)) - { -#if defined(RCC_PLLSAI1M_DIV_1_16_SUPPORT) - /* PLLSAI1M exists: apply PLLSAI1M divider for PLLSAI1 output computation */ - /* f(PLLSAI1 Source) / PLLSAI1M */ - pllvco = (pllvco / ((READ_BIT(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1M) >> RCC_PLLSAI1CFGR_PLLSAI1M_Pos) + 1U)); -#else - /* f(PLL Source) / PLLM */ - pllvco = (pllvco / ((READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLM) >> RCC_PLLCFGR_PLLM_Pos) + 1U)); -#endif - /* f(PLLSAI1CLK) = f(VCOSAI1 input) * PLLSAI1N / PLLSAI1P */ - plln = READ_BIT(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1N) >> RCC_PLLSAI1CFGR_PLLSAI1N_Pos; -#if defined(RCC_PLLSAI1P_DIV_2_31_SUPPORT) - pllp = READ_BIT(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1PDIV) >> RCC_PLLSAI1CFGR_PLLSAI1PDIV_Pos; -#endif - if(pllp == 0U) - { - if(READ_BIT(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1P) != 0U) - { - pllp = 17U; - } - else - { - pllp = 7U; - } - } - frequency = (pllvco * plln) / pllp; - } - else if(HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSIRDY)) - { - /* HSI automatically selected as clock source if PLLs not enabled */ - frequency = HSI_VALUE; - } - else - { - /* No clock source, frequency default init at 0 */ - } - } -#endif /* SAI2 */ - -#if defined(RCC_PLLSAI2_SUPPORT) - - else if((srcclk == RCC_SAI1CLKSOURCE_PLLSAI2) || (srcclk == RCC_SAI2CLKSOURCE_PLLSAI2)) - { - if(HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLLSAI2RDY) && (__HAL_RCC_GET_PLLSAI2CLKOUT_CONFIG(RCC_PLLSAI2_SAI2CLK) != 0U)) - { -#if defined(RCC_PLLSAI2M_DIV_1_16_SUPPORT) - /* PLLSAI2M exists: apply PLLSAI2M divider for PLLSAI2 output computation */ - /* f(PLLSAI2 Source) / PLLSAI2M */ - pllvco = (pllvco / ((READ_BIT(RCC->PLLSAI2CFGR, RCC_PLLSAI2CFGR_PLLSAI2M) >> RCC_PLLSAI2CFGR_PLLSAI2M_Pos) + 1U)); -#else - /* f(PLL Source) / PLLM */ - pllvco = (pllvco / ((READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLM) >> RCC_PLLCFGR_PLLM_Pos) + 1U)); -#endif - /* f(PLLSAI2CLK) = f(VCOSAI2 input) * PLLSAI2N / PLLSAI2P */ - plln = READ_BIT(RCC->PLLSAI2CFGR, RCC_PLLSAI2CFGR_PLLSAI2N) >> RCC_PLLSAI2CFGR_PLLSAI2N_Pos; -#if defined(RCC_PLLSAI2P_DIV_2_31_SUPPORT) - pllp = READ_BIT(RCC->PLLSAI2CFGR, RCC_PLLSAI2CFGR_PLLSAI2PDIV) >> RCC_PLLSAI2CFGR_PLLSAI2PDIV_Pos; -#endif - if(pllp == 0U) - { - if(READ_BIT(RCC->PLLSAI2CFGR, RCC_PLLSAI2CFGR_PLLSAI2P) != 0U) - { - pllp = 17U; - } - else - { - pllp = 7U; - } - } - frequency = (pllvco * plln) / pllp; - } - } - -#endif /* RCC_PLLSAI2_SUPPORT */ - - else - { - /* No clock source, frequency default init at 0 */ - } - } - - - return frequency; -} - -#endif /* SAI1 */ - -/** - * @} - */ - -/** - * @} - */ - -#endif /* HAL_RCC_MODULE_ENABLED */ -/** - * @} - */ - -/** - * @} - */ - - +/** + ****************************************************************************** + * @file stm32l4xx_hal_rcc_ex.c + * @author MCD Application Team + * @brief Extended RCC HAL module driver. + * This file provides firmware functions to manage the following + * functionalities RCC extended peripheral: + * + Extended Peripheral Control functions + * + Extended Clock management functions + * + Extended Clock Recovery System Control functions + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file in + * the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l4xx_hal.h" + +/** @addtogroup STM32L4xx_HAL_Driver + * @{ + */ + +/** @defgroup RCCEx RCCEx + * @brief RCC Extended HAL module driver + * @{ + */ + +#ifdef HAL_RCC_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private defines -----------------------------------------------------------*/ +/** @defgroup RCCEx_Private_Constants RCCEx Private Constants + * @{ + */ +#define PLLSAI1_TIMEOUT_VALUE 2U /* 2 ms (minimum Tick + 1) */ +#define PLLSAI2_TIMEOUT_VALUE 2U /* 2 ms (minimum Tick + 1) */ +#define PLL_TIMEOUT_VALUE 2U /* 2 ms (minimum Tick + 1) */ + +#define DIVIDER_P_UPDATE 0U +#define DIVIDER_Q_UPDATE 1U +#define DIVIDER_R_UPDATE 2U + +#define __LSCO_CLK_ENABLE() __HAL_RCC_GPIOA_CLK_ENABLE() +#define LSCO_GPIO_PORT GPIOA +#define LSCO_PIN GPIO_PIN_2 +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/** @defgroup RCCEx_Private_Functions RCCEx Private Functions + * @{ + */ +#if defined(RCC_PLLSAI1_SUPPORT) + +static HAL_StatusTypeDef RCCEx_PLLSAI1_Config(RCC_PLLSAI1InitTypeDef *PllSai1, uint32_t Divider); + +#endif /* RCC_PLLSAI1_SUPPORT */ + +#if defined(RCC_PLLSAI2_SUPPORT) + +static HAL_StatusTypeDef RCCEx_PLLSAI2_Config(RCC_PLLSAI2InitTypeDef *PllSai2, uint32_t Divider); + +#endif /* RCC_PLLSAI2_SUPPORT */ + +#if defined(SAI1) + +static uint32_t RCCEx_GetSAIxPeriphCLKFreq(uint32_t PeriphClk, uint32_t InputFrequency); + +#endif /* SAI1 */ +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup RCCEx_Exported_Functions RCCEx Exported Functions + * @{ + */ + +/** @defgroup RCCEx_Exported_Functions_Group1 Extended Peripheral Control functions + * @brief Extended Peripheral Control functions + * +@verbatim + =============================================================================== + ##### Extended Peripheral Control functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to control the RCC Clocks + frequencies. + [..] + (@) Important note: Care must be taken when HAL_RCCEx_PeriphCLKConfig() is used to + select the RTC clock source; in this case the Backup domain will be reset in + order to modify the RTC Clock source, as consequence RTC registers (including + the backup registers) are set to their reset values. + +@endverbatim + * @{ + */ +/** + * @brief Initialize the RCC extended peripherals clocks according to the specified + * parameters in the RCC_PeriphCLKInitTypeDef. + * @param PeriphClkInit pointer to an RCC_PeriphCLKInitTypeDef structure that + * contains a field PeriphClockSelection which can be a combination of the following values: + * @arg @ref RCC_PERIPHCLK_RTC RTC peripheral clock + * @arg @ref RCC_PERIPHCLK_ADC ADC peripheral clock + @if STM32L462xx + * @arg @ref RCC_PERIPHCLK_DFSDM1 DFSDM1 peripheral clock (only for devices with DFSDM1) + @endif + @if STM32L486xx + * @arg @ref RCC_PERIPHCLK_DFSDM1 DFSDM1 peripheral clock (only for devices with DFSDM1) + @endif + @if STM32L4A6xx + * @arg @ref RCC_PERIPHCLK_DFSDM1 DFSDM1 peripheral clock (only for devices with DFSDM1) + @endif + * @arg @ref RCC_PERIPHCLK_I2C1 I2C1 peripheral clock + * @arg @ref RCC_PERIPHCLK_I2C2 I2C2 peripheral clock + * @arg @ref RCC_PERIPHCLK_I2C3 I2C3 peripheral clock + @if STM32L462xx + * @arg @ref RCC_PERIPHCLK_I2C4 I2C4 peripheral clock (only for devices with I2C4) + @endif + @if STM32L4A6xx + * @arg @ref RCC_PERIPHCLK_I2C4 I2C4 peripheral clock (only for devices with I2C4) + @endif + @if STM32L4S9xx + * @arg @ref RCC_PERIPHCLK_I2C4 I2C4 peripheral clock (only for devices with I2C4) + @endif + * @arg @ref RCC_PERIPHCLK_LPTIM1 LPTIM1 peripheral clock + * @arg @ref RCC_PERIPHCLK_LPTIM2 LPTIM2 peripheral clock + * @arg @ref RCC_PERIPHCLK_LPUART1 LPUART1 peripheral clock + * @arg @ref RCC_PERIPHCLK_RNG RNG peripheral clock + * @arg @ref RCC_PERIPHCLK_SAI1 SAI1 peripheral clock (only for devices with SAI1) + @if STM32L486xx + * @arg @ref RCC_PERIPHCLK_SAI2 SAI2 peripheral clock (only for devices with SAI2) + @endif + @if STM32L4A6xx + * @arg @ref RCC_PERIPHCLK_SAI2 SAI2 peripheral clock (only for devices with SAI2) + @endif + @if STM32L4S9xx + * @arg @ref RCC_PERIPHCLK_SAI2 SAI2 peripheral clock (only for devices with SAI2) + @endif + * @arg @ref RCC_PERIPHCLK_SDMMC1 SDMMC1 peripheral clock + @if STM32L443xx + * @arg @ref RCC_PERIPHCLK_SWPMI1 SWPMI1 peripheral clock (only for devices with SWPMI1) + @endif + @if STM32L486xx + * @arg @ref RCC_PERIPHCLK_SWPMI1 SWPMI1 peripheral clock (only for devices with SWPMI1) + @endif + @if STM32L4A6xx + * @arg @ref RCC_PERIPHCLK_SWPMI1 SWPMI1 peripheral clock (only for devices with SWPMI1) + @endif + * @arg @ref RCC_PERIPHCLK_USART1 USART1 peripheral clock + * @arg @ref RCC_PERIPHCLK_USART2 USART1 peripheral clock + * @arg @ref RCC_PERIPHCLK_USART3 USART1 peripheral clock + @if STM32L462xx + * @arg @ref RCC_PERIPHCLK_UART4 USART1 peripheral clock (only for devices with UART4) + @endif + @if STM32L486xx + * @arg @ref RCC_PERIPHCLK_UART4 USART1 peripheral clock (only for devices with UART4) + * @arg @ref RCC_PERIPHCLK_UART5 USART1 peripheral clock (only for devices with UART5) + * @arg @ref RCC_PERIPHCLK_USB USB peripheral clock (only for devices with USB) + @endif + @if STM32L4A6xx + * @arg @ref RCC_PERIPHCLK_UART4 USART1 peripheral clock (only for devices with UART4) + * @arg @ref RCC_PERIPHCLK_UART5 USART1 peripheral clock (only for devices with UART5) + * @arg @ref RCC_PERIPHCLK_USB USB peripheral clock (only for devices with USB) + @endif + @if STM32L4S9xx + * @arg @ref RCC_PERIPHCLK_UART4 USART1 peripheral clock (only for devices with UART4) + * @arg @ref RCC_PERIPHCLK_UART5 USART1 peripheral clock (only for devices with UART5) + * @arg @ref RCC_PERIPHCLK_USB USB peripheral clock (only for devices with USB) + * @arg @ref RCC_PERIPHCLK_DFSDM1 DFSDM1 peripheral kernel clock (only for devices with DFSDM1) + * @arg @ref RCC_PERIPHCLK_DFSDM1AUDIO DFSDM1 peripheral audio clock (only for devices with DFSDM1) + * @arg @ref RCC_PERIPHCLK_LTDC LTDC peripheral clock (only for devices with LTDC) + * @arg @ref RCC_PERIPHCLK_DSI DSI peripheral clock (only for devices with DSI) + * @arg @ref RCC_PERIPHCLK_OSPI OctoSPI peripheral clock (only for devices with OctoSPI) + @endif + * + * @note Care must be taken when HAL_RCCEx_PeriphCLKConfig() is used to select + * the RTC clock source: in this case the access to Backup domain is enabled. + * + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RCCEx_PeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit) +{ + uint32_t tmpregister, tickstart; /* no init needed */ + HAL_StatusTypeDef ret = HAL_OK; /* Intermediate status */ + HAL_StatusTypeDef status = HAL_OK; /* Final status */ + + /* Check the parameters */ + assert_param(IS_RCC_PERIPHCLOCK(PeriphClkInit->PeriphClockSelection)); + +#if defined(SAI1) + + /*-------------------------- SAI1 clock source configuration ---------------------*/ + if((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAI1) == RCC_PERIPHCLK_SAI1)) + { + /* Check the parameters */ + assert_param(IS_RCC_SAI1CLK(PeriphClkInit->Sai1ClockSelection)); + + switch(PeriphClkInit->Sai1ClockSelection) + { + case RCC_SAI1CLKSOURCE_PLL: /* PLL is used as clock source for SAI1*/ + /* Enable SAI Clock output generated from System PLL . */ +#if defined(RCC_PLLSAI2_SUPPORT) + __HAL_RCC_PLLCLKOUT_ENABLE(RCC_PLL_SAI3CLK); +#else + __HAL_RCC_PLLCLKOUT_ENABLE(RCC_PLL_SAI2CLK); +#endif /* RCC_PLLSAI2_SUPPORT */ + /* SAI1 clock source config set later after clock selection check */ + break; + + case RCC_SAI1CLKSOURCE_PLLSAI1: /* PLLSAI1 is used as clock source for SAI1*/ + /* PLLSAI1 input clock, parameters M, N & P configuration and clock output (PLLSAI1ClockOut) */ + ret = RCCEx_PLLSAI1_Config(&(PeriphClkInit->PLLSAI1), DIVIDER_P_UPDATE); + /* SAI1 clock source config set later after clock selection check */ + break; + +#if defined(RCC_PLLSAI2_SUPPORT) + + case RCC_SAI1CLKSOURCE_PLLSAI2: /* PLLSAI2 is used as clock source for SAI1*/ + /* PLLSAI2 input clock, parameters M, N & P configuration clock output (PLLSAI2ClockOut) */ + ret = RCCEx_PLLSAI2_Config(&(PeriphClkInit->PLLSAI2), DIVIDER_P_UPDATE); + /* SAI1 clock source config set later after clock selection check */ + break; + +#endif /* RCC_PLLSAI2_SUPPORT */ + + case RCC_SAI1CLKSOURCE_PIN: /* External clock is used as source of SAI1 clock*/ +#if defined(STM32L4P5xx) || defined(STM32L4Q5xx) || defined(STM32L4R5xx) || defined(STM32L4R7xx) || defined(STM32L4R9xx) || defined(STM32L4S5xx) || defined(STM32L4S7xx) || defined(STM32L4S9xx) + case RCC_SAI1CLKSOURCE_HSI: /* HSI is used as source of SAI1 clock*/ +#endif /* STM32L4P5xx || STM32L4Q5xx || STM32L4R5xx || STM32L4R7xx || STM32L4R9xx || STM32L4S5xx || STM32L4S7xx || STM32L4S9xx */ + /* SAI1 clock source config set later after clock selection check */ + break; + + default: + ret = HAL_ERROR; + break; + } + + if(ret == HAL_OK) + { + /* Set the source of SAI1 clock*/ + __HAL_RCC_SAI1_CONFIG(PeriphClkInit->Sai1ClockSelection); + } + else + { + /* set overall return value */ + status = ret; + } + } + +#endif /* SAI1 */ + +#if defined(SAI2) + + /*-------------------------- SAI2 clock source configuration ---------------------*/ + if((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAI2) == RCC_PERIPHCLK_SAI2)) + { + /* Check the parameters */ + assert_param(IS_RCC_SAI2CLK(PeriphClkInit->Sai2ClockSelection)); + + switch(PeriphClkInit->Sai2ClockSelection) + { + case RCC_SAI2CLKSOURCE_PLL: /* PLL is used as clock source for SAI2*/ + /* Enable SAI Clock output generated from System PLL . */ + __HAL_RCC_PLLCLKOUT_ENABLE(RCC_PLL_SAI3CLK); + /* SAI2 clock source config set later after clock selection check */ + break; + + case RCC_SAI2CLKSOURCE_PLLSAI1: /* PLLSAI1 is used as clock source for SAI2*/ + /* PLLSAI1 input clock, parameters M, N & P configuration and clock output (PLLSAI1ClockOut) */ + ret = RCCEx_PLLSAI1_Config(&(PeriphClkInit->PLLSAI1), DIVIDER_P_UPDATE); + /* SAI2 clock source config set later after clock selection check */ + break; + + case RCC_SAI2CLKSOURCE_PLLSAI2: /* PLLSAI2 is used as clock source for SAI2*/ + /* PLLSAI2 input clock, parameters M, N & P configuration and clock output (PLLSAI2ClockOut) */ + ret = RCCEx_PLLSAI2_Config(&(PeriphClkInit->PLLSAI2), DIVIDER_P_UPDATE); + /* SAI2 clock source config set later after clock selection check */ + break; + + case RCC_SAI2CLKSOURCE_PIN: /* External clock is used as source of SAI2 clock*/ +#if defined(STM32L4P5xx) || defined(STM32L4Q5xx) || defined(STM32L4R5xx) || defined(STM32L4R7xx) || defined(STM32L4R9xx) || defined(STM32L4S5xx) || defined(STM32L4S7xx) || defined(STM32L4S9xx) + case RCC_SAI2CLKSOURCE_HSI: /* HSI is used as source of SAI2 clock*/ +#endif /* STM32L4P5xx || STM32L4Q5xx || STM32L4R5xx || STM32L4R7xx || STM32L4R9xx || STM32L4S5xx || STM32L4S7xx || STM32L4S9xx */ + /* SAI2 clock source config set later after clock selection check */ + break; + + default: + ret = HAL_ERROR; + break; + } + + if(ret == HAL_OK) + { + /* Set the source of SAI2 clock*/ + __HAL_RCC_SAI2_CONFIG(PeriphClkInit->Sai2ClockSelection); + } + else + { + /* set overall return value */ + status = ret; + } + } +#endif /* SAI2 */ + + /*-------------------------- RTC clock source configuration ----------------------*/ + if((PeriphClkInit->PeriphClockSelection & RCC_PERIPHCLK_RTC) == RCC_PERIPHCLK_RTC) + { + FlagStatus pwrclkchanged = RESET; + + /* Check for RTC Parameters used to output RTCCLK */ + assert_param(IS_RCC_RTCCLKSOURCE(PeriphClkInit->RTCClockSelection)); + + /* Enable Power Clock */ + if(__HAL_RCC_PWR_IS_CLK_DISABLED() != 0U) + { + __HAL_RCC_PWR_CLK_ENABLE(); + pwrclkchanged = SET; + } + + /* Enable write access to Backup domain */ + SET_BIT(PWR->CR1, PWR_CR1_DBP); + + /* Wait for Backup domain Write protection disable */ + tickstart = HAL_GetTick(); + + while(READ_BIT(PWR->CR1, PWR_CR1_DBP) == 0U) + { + if((HAL_GetTick() - tickstart) > RCC_DBP_TIMEOUT_VALUE) + { + ret = HAL_TIMEOUT; + break; + } + } + + if(ret == HAL_OK) + { + /* Reset the Backup domain only if the RTC Clock source selection is modified from default */ + tmpregister = READ_BIT(RCC->BDCR, RCC_BDCR_RTCSEL); + + if((tmpregister != RCC_RTCCLKSOURCE_NONE) && (tmpregister != PeriphClkInit->RTCClockSelection)) + { + /* Store the content of BDCR register before the reset of Backup Domain */ + tmpregister = READ_BIT(RCC->BDCR, ~(RCC_BDCR_RTCSEL)); + /* RTC Clock selection can be changed only if the Backup Domain is reset */ + __HAL_RCC_BACKUPRESET_FORCE(); + __HAL_RCC_BACKUPRESET_RELEASE(); + /* Restore the Content of BDCR register */ + RCC->BDCR = tmpregister; + } + + /* Wait for LSE reactivation if LSE was enable prior to Backup Domain reset */ + if (HAL_IS_BIT_SET(tmpregister, RCC_BDCR_LSEON)) + { + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till LSE is ready */ + while(READ_BIT(RCC->BDCR, RCC_BDCR_LSERDY) == 0U) + { + if((HAL_GetTick() - tickstart) > RCC_LSE_TIMEOUT_VALUE) + { + ret = HAL_TIMEOUT; + break; + } + } + } + + if(ret == HAL_OK) + { + /* Apply new RTC clock source selection */ + __HAL_RCC_RTC_CONFIG(PeriphClkInit->RTCClockSelection); + } + else + { + /* set overall return value */ + status = ret; + } + } + else + { + /* set overall return value */ + status = ret; + } + + /* Restore clock configuration if changed */ + if(pwrclkchanged == SET) + { + __HAL_RCC_PWR_CLK_DISABLE(); + } + } + + /*-------------------------- USART1 clock source configuration -------------------*/ + if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_USART1) == RCC_PERIPHCLK_USART1) + { + /* Check the parameters */ + assert_param(IS_RCC_USART1CLKSOURCE(PeriphClkInit->Usart1ClockSelection)); + + /* Configure the USART1 clock source */ + __HAL_RCC_USART1_CONFIG(PeriphClkInit->Usart1ClockSelection); + } + + /*-------------------------- USART2 clock source configuration -------------------*/ + if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_USART2) == RCC_PERIPHCLK_USART2) + { + /* Check the parameters */ + assert_param(IS_RCC_USART2CLKSOURCE(PeriphClkInit->Usart2ClockSelection)); + + /* Configure the USART2 clock source */ + __HAL_RCC_USART2_CONFIG(PeriphClkInit->Usart2ClockSelection); + } + +#if defined(USART3) + + /*-------------------------- USART3 clock source configuration -------------------*/ + if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_USART3) == RCC_PERIPHCLK_USART3) + { + /* Check the parameters */ + assert_param(IS_RCC_USART3CLKSOURCE(PeriphClkInit->Usart3ClockSelection)); + + /* Configure the USART3 clock source */ + __HAL_RCC_USART3_CONFIG(PeriphClkInit->Usart3ClockSelection); + } + +#endif /* USART3 */ + +#if defined(UART4) + + /*-------------------------- UART4 clock source configuration --------------------*/ + if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_UART4) == RCC_PERIPHCLK_UART4) + { + /* Check the parameters */ + assert_param(IS_RCC_UART4CLKSOURCE(PeriphClkInit->Uart4ClockSelection)); + + /* Configure the UART4 clock source */ + __HAL_RCC_UART4_CONFIG(PeriphClkInit->Uart4ClockSelection); + } + +#endif /* UART4 */ + +#if defined(UART5) + + /*-------------------------- UART5 clock source configuration --------------------*/ + if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_UART5) == RCC_PERIPHCLK_UART5) + { + /* Check the parameters */ + assert_param(IS_RCC_UART5CLKSOURCE(PeriphClkInit->Uart5ClockSelection)); + + /* Configure the UART5 clock source */ + __HAL_RCC_UART5_CONFIG(PeriphClkInit->Uart5ClockSelection); + } + +#endif /* UART5 */ + + /*-------------------------- LPUART1 clock source configuration ------------------*/ + if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_LPUART1) == RCC_PERIPHCLK_LPUART1) + { + /* Check the parameters */ + assert_param(IS_RCC_LPUART1CLKSOURCE(PeriphClkInit->Lpuart1ClockSelection)); + + /* Configure the LPUART1 clock source */ + __HAL_RCC_LPUART1_CONFIG(PeriphClkInit->Lpuart1ClockSelection); + } + + /*-------------------------- LPTIM1 clock source configuration -------------------*/ + if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_LPTIM1) == (RCC_PERIPHCLK_LPTIM1)) + { + assert_param(IS_RCC_LPTIM1CLK(PeriphClkInit->Lptim1ClockSelection)); + __HAL_RCC_LPTIM1_CONFIG(PeriphClkInit->Lptim1ClockSelection); + } + + /*-------------------------- LPTIM2 clock source configuration -------------------*/ + if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_LPTIM2) == (RCC_PERIPHCLK_LPTIM2)) + { + assert_param(IS_RCC_LPTIM2CLK(PeriphClkInit->Lptim2ClockSelection)); + __HAL_RCC_LPTIM2_CONFIG(PeriphClkInit->Lptim2ClockSelection); + } + + /*-------------------------- I2C1 clock source configuration ---------------------*/ + if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2C1) == RCC_PERIPHCLK_I2C1) + { + /* Check the parameters */ + assert_param(IS_RCC_I2C1CLKSOURCE(PeriphClkInit->I2c1ClockSelection)); + + /* Configure the I2C1 clock source */ + __HAL_RCC_I2C1_CONFIG(PeriphClkInit->I2c1ClockSelection); + } + +#if defined(I2C2) + + /*-------------------------- I2C2 clock source configuration ---------------------*/ + if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2C2) == RCC_PERIPHCLK_I2C2) + { + /* Check the parameters */ + assert_param(IS_RCC_I2C2CLKSOURCE(PeriphClkInit->I2c2ClockSelection)); + + /* Configure the I2C2 clock source */ + __HAL_RCC_I2C2_CONFIG(PeriphClkInit->I2c2ClockSelection); + } + +#endif /* I2C2 */ + + /*-------------------------- I2C3 clock source configuration ---------------------*/ + if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2C3) == RCC_PERIPHCLK_I2C3) + { + /* Check the parameters */ + assert_param(IS_RCC_I2C3CLKSOURCE(PeriphClkInit->I2c3ClockSelection)); + + /* Configure the I2C3 clock source */ + __HAL_RCC_I2C3_CONFIG(PeriphClkInit->I2c3ClockSelection); + } + +#if defined(I2C4) + + /*-------------------------- I2C4 clock source configuration ---------------------*/ + if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2C4) == RCC_PERIPHCLK_I2C4) + { + /* Check the parameters */ + assert_param(IS_RCC_I2C4CLKSOURCE(PeriphClkInit->I2c4ClockSelection)); + + /* Configure the I2C4 clock source */ + __HAL_RCC_I2C4_CONFIG(PeriphClkInit->I2c4ClockSelection); + } + +#endif /* I2C4 */ + +#if defined(USB_OTG_FS) || defined(USB) + + /*-------------------------- USB clock source configuration ----------------------*/ + if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_USB) == (RCC_PERIPHCLK_USB)) + { + assert_param(IS_RCC_USBCLKSOURCE(PeriphClkInit->UsbClockSelection)); + __HAL_RCC_USB_CONFIG(PeriphClkInit->UsbClockSelection); + + if(PeriphClkInit->UsbClockSelection == RCC_USBCLKSOURCE_PLL) + { + /* Enable PLL48M1CLK output clock */ + __HAL_RCC_PLLCLKOUT_ENABLE(RCC_PLL_48M1CLK); + } + else + { +#if defined(RCC_PLLSAI1_SUPPORT) + if(PeriphClkInit->UsbClockSelection == RCC_USBCLKSOURCE_PLLSAI1) + { + /* PLLSAI1 input clock, parameters M, N & Q configuration and clock output (PLLSAI1ClockOut) */ + ret = RCCEx_PLLSAI1_Config(&(PeriphClkInit->PLLSAI1), DIVIDER_Q_UPDATE); + + if(ret != HAL_OK) + { + /* set overall return value */ + status = ret; + } + } +#endif /* RCC_PLLSAI1_SUPPORT */ + } + } + +#endif /* USB_OTG_FS || USB */ + +#if defined(SDMMC1) + + /*-------------------------- SDMMC1 clock source configuration -------------------*/ + if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SDMMC1) == (RCC_PERIPHCLK_SDMMC1)) + { + assert_param(IS_RCC_SDMMC1CLKSOURCE(PeriphClkInit->Sdmmc1ClockSelection)); + __HAL_RCC_SDMMC1_CONFIG(PeriphClkInit->Sdmmc1ClockSelection); + + if(PeriphClkInit->Sdmmc1ClockSelection == RCC_SDMMC1CLKSOURCE_PLL) /* PLL "Q" ? */ + { + /* Enable PLL48M1CLK output clock */ + __HAL_RCC_PLLCLKOUT_ENABLE(RCC_PLL_48M1CLK); + } +#if defined(RCC_CCIPR2_SDMMCSEL) + else if(PeriphClkInit->Sdmmc1ClockSelection == RCC_SDMMC1CLKSOURCE_PLLP) /* PLL "P" ? */ + { + /* Enable PLLSAI3CLK output */ + __HAL_RCC_PLLCLKOUT_ENABLE(RCC_PLL_SAI3CLK); + } +#endif + else if(PeriphClkInit->Sdmmc1ClockSelection == RCC_SDMMC1CLKSOURCE_PLLSAI1) + { + /* PLLSAI1 input clock, parameters M, N & Q configuration and clock output (PLLSAI1ClockOut) */ + ret = RCCEx_PLLSAI1_Config(&(PeriphClkInit->PLLSAI1), DIVIDER_Q_UPDATE); + + if(ret != HAL_OK) + { + /* set overall return value */ + status = ret; + } + } + else + { + /* nothing to do */ + } + } + +#endif /* SDMMC1 */ + + /*-------------------------- RNG clock source configuration ----------------------*/ + if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_RNG) == (RCC_PERIPHCLK_RNG)) + { + assert_param(IS_RCC_RNGCLKSOURCE(PeriphClkInit->RngClockSelection)); + __HAL_RCC_RNG_CONFIG(PeriphClkInit->RngClockSelection); + + if(PeriphClkInit->RngClockSelection == RCC_RNGCLKSOURCE_PLL) + { + /* Enable PLL48M1CLK output clock */ + __HAL_RCC_PLLCLKOUT_ENABLE(RCC_PLL_48M1CLK); + } +#if defined(RCC_PLLSAI1_SUPPORT) + else if(PeriphClkInit->RngClockSelection == RCC_RNGCLKSOURCE_PLLSAI1) + { + /* PLLSAI1 input clock, parameters M, N & Q configuration and clock output (PLLSAI1ClockOut) */ + ret = RCCEx_PLLSAI1_Config(&(PeriphClkInit->PLLSAI1), DIVIDER_Q_UPDATE); + + if(ret != HAL_OK) + { + /* set overall return value */ + status = ret; + } + } +#endif /* RCC_PLLSAI1_SUPPORT */ + else + { + /* nothing to do */ + } + } + + /*-------------------------- ADC clock source configuration ----------------------*/ +#if !defined(STM32L412xx) && !defined(STM32L422xx) + if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_ADC) == RCC_PERIPHCLK_ADC) + { + /* Check the parameters */ + assert_param(IS_RCC_ADCCLKSOURCE(PeriphClkInit->AdcClockSelection)); + + /* Configure the ADC interface clock source */ + __HAL_RCC_ADC_CONFIG(PeriphClkInit->AdcClockSelection); + +#if defined(RCC_PLLSAI1_SUPPORT) + if(PeriphClkInit->AdcClockSelection == RCC_ADCCLKSOURCE_PLLSAI1) + { + /* PLLSAI1 input clock, parameters M, N & R configuration and clock output (PLLSAI1ClockOut) */ + ret = RCCEx_PLLSAI1_Config(&(PeriphClkInit->PLLSAI1), DIVIDER_R_UPDATE); + + if(ret != HAL_OK) + { + /* set overall return value */ + status = ret; + } + } +#endif /* RCC_PLLSAI1_SUPPORT */ + +#if defined(STM32L471xx) || defined(STM32L475xx) || defined(STM32L476xx) || defined(STM32L485xx) || defined(STM32L486xx) || defined(STM32L496xx) || defined(STM32L4A6xx) + + else if(PeriphClkInit->AdcClockSelection == RCC_ADCCLKSOURCE_PLLSAI2) + { + /* PLLSAI2 input clock, parameters M, N & R configuration and clock output (PLLSAI2ClockOut) */ + ret = RCCEx_PLLSAI2_Config(&(PeriphClkInit->PLLSAI2), DIVIDER_R_UPDATE); + + if(ret != HAL_OK) + { + /* set overall return value */ + status = ret; + } + } + else + { + /* nothing to do */ + } + +#endif /* STM32L471xx || STM32L475xx || STM32L476xx || STM32L485xx || STM32L486xx || STM32L496xx || STM32L4A6xx */ + + } +#endif /* !STM32L412xx && !STM32L422xx */ + +#if defined(SWPMI1) + + /*-------------------------- SWPMI1 clock source configuration -------------------*/ + if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SWPMI1) == RCC_PERIPHCLK_SWPMI1) + { + /* Check the parameters */ + assert_param(IS_RCC_SWPMI1CLKSOURCE(PeriphClkInit->Swpmi1ClockSelection)); + + /* Configure the SWPMI1 clock source */ + __HAL_RCC_SWPMI1_CONFIG(PeriphClkInit->Swpmi1ClockSelection); + } + +#endif /* SWPMI1 */ + +#if defined(DFSDM1_Filter0) + + /*-------------------------- DFSDM1 clock source configuration -------------------*/ + if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_DFSDM1) == RCC_PERIPHCLK_DFSDM1) + { + /* Check the parameters */ + assert_param(IS_RCC_DFSDM1CLKSOURCE(PeriphClkInit->Dfsdm1ClockSelection)); + + /* Configure the DFSDM1 interface clock source */ + __HAL_RCC_DFSDM1_CONFIG(PeriphClkInit->Dfsdm1ClockSelection); + } + +#if defined(STM32L4P5xx) || defined(STM32L4Q5xx) || defined(STM32L4R5xx) || defined(STM32L4R7xx) || defined(STM32L4R9xx) || defined(STM32L4S5xx) || defined(STM32L4S7xx) || defined(STM32L4S9xx) + /*-------------------------- DFSDM1 audio clock source configuration -------------*/ + if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_DFSDM1AUDIO) == RCC_PERIPHCLK_DFSDM1AUDIO) + { + /* Check the parameters */ + assert_param(IS_RCC_DFSDM1AUDIOCLKSOURCE(PeriphClkInit->Dfsdm1AudioClockSelection)); + + /* Configure the DFSDM1 interface audio clock source */ + __HAL_RCC_DFSDM1AUDIO_CONFIG(PeriphClkInit->Dfsdm1AudioClockSelection); + } + +#endif /* STM32L4P5xx || STM32L4Q5xx || STM32L4R5xx || STM32L4R7xx || STM32L4R9xx || STM32L4S5xx || STM32L4S7xx || STM32L4S9xx */ + +#endif /* DFSDM1_Filter0 */ + +#if defined(LTDC) + + /*-------------------------- LTDC clock source configuration --------------------*/ + if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_LTDC) == RCC_PERIPHCLK_LTDC) + { + /* Check the parameters */ + assert_param(IS_RCC_LTDCCLKSOURCE(PeriphClkInit->LtdcClockSelection)); + + /* Disable the PLLSAI2 */ + __HAL_RCC_PLLSAI2_DISABLE(); + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till PLLSAI2 is ready */ + while(READ_BIT(RCC->CR, RCC_CR_PLLSAI2RDY) != 0U) + { + if((HAL_GetTick() - tickstart) > PLLSAI2_TIMEOUT_VALUE) + { + ret = HAL_TIMEOUT; + break; + } + } + + if(ret == HAL_OK) + { + /* Configure the LTDC clock source */ + __HAL_RCC_LTDC_CONFIG(PeriphClkInit->LtdcClockSelection); + + /* PLLSAI2 input clock, parameters M, N & R configuration and clock output (PLLSAI2ClockOut) */ + ret = RCCEx_PLLSAI2_Config(&(PeriphClkInit->PLLSAI2), DIVIDER_R_UPDATE); + } + + if(ret != HAL_OK) + { + /* set overall return value */ + status = ret; + } + } + +#endif /* LTDC */ + +#if defined(DSI) + + /*-------------------------- DSI clock source configuration ---------------------*/ + if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_DSI) == RCC_PERIPHCLK_DSI) + { + /* Check the parameters */ + assert_param(IS_RCC_DSICLKSOURCE(PeriphClkInit->DsiClockSelection)); + + /* Configure the DSI clock source */ + __HAL_RCC_DSI_CONFIG(PeriphClkInit->DsiClockSelection); + + if(PeriphClkInit->DsiClockSelection == RCC_DSICLKSOURCE_PLLSAI2) + { + /* PLLSAI2 input clock, parameters M, N & Q configuration and clock output (PLLSAI2ClockOut) */ + ret = RCCEx_PLLSAI2_Config(&(PeriphClkInit->PLLSAI2), DIVIDER_Q_UPDATE); + + if(ret != HAL_OK) + { + /* set overall return value */ + status = ret; + } + } + } + +#endif /* DSI */ + +#if defined(OCTOSPI1) || defined(OCTOSPI2) + + /*-------------------------- OctoSPIx clock source configuration ----------------*/ + if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_OSPI) == RCC_PERIPHCLK_OSPI) + { + /* Check the parameters */ + assert_param(IS_RCC_OSPICLKSOURCE(PeriphClkInit->OspiClockSelection)); + + /* Configure the OctoSPI clock source */ + __HAL_RCC_OSPI_CONFIG(PeriphClkInit->OspiClockSelection); + + if(PeriphClkInit->OspiClockSelection == RCC_OSPICLKSOURCE_PLL) + { + /* Enable PLL48M1CLK output */ + __HAL_RCC_PLLCLKOUT_ENABLE(RCC_PLL_48M1CLK); + } + } + +#endif /* OCTOSPI1 || OCTOSPI2 */ + + return status; +} + +/** + * @brief Get the RCC_ClkInitStruct according to the internal RCC configuration registers. + * @param PeriphClkInit pointer to an RCC_PeriphCLKInitTypeDef structure that + * returns the configuration information for the Extended Peripherals + * clocks(SAI1, SAI2, LPTIM1, LPTIM2, I2C1, I2C2, I2C3, I2C4, LPUART1, + * USART1, USART2, USART3, UART4, UART5, RTC, ADCx, DFSDMx, SWPMI1, USB, SDMMC1 and RNG). + * @retval None + */ +void HAL_RCCEx_GetPeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit) +{ + /* Set all possible values for the extended clock type parameter------------*/ + +#if defined(STM32L412xx) || defined(STM32L422xx) + + PeriphClkInit->PeriphClockSelection = RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_USART2 | RCC_PERIPHCLK_USART3 | \ + RCC_PERIPHCLK_LPUART1 | RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_I2C2 | RCC_PERIPHCLK_I2C3 | \ + RCC_PERIPHCLK_LPTIM1 | RCC_PERIPHCLK_LPTIM2 | RCC_PERIPHCLK_USB | \ + RCC_PERIPHCLK_RNG | \ + RCC_PERIPHCLK_RTC ; + +#elif defined(STM32L431xx) + + PeriphClkInit->PeriphClockSelection = RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_USART2 | RCC_PERIPHCLK_USART3 | \ + RCC_PERIPHCLK_LPUART1 | RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_I2C2 | RCC_PERIPHCLK_I2C3 | \ + RCC_PERIPHCLK_LPTIM1 | RCC_PERIPHCLK_LPTIM2 | RCC_PERIPHCLK_SAI1 | \ + RCC_PERIPHCLK_SDMMC1 | RCC_PERIPHCLK_RNG | RCC_PERIPHCLK_ADC | RCC_PERIPHCLK_SWPMI1 | \ + RCC_PERIPHCLK_RTC ; + +#elif defined(STM32L432xx) || defined(STM32L442xx) + + PeriphClkInit->PeriphClockSelection = RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_USART2 | \ + RCC_PERIPHCLK_LPUART1 | RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_I2C3 | \ + RCC_PERIPHCLK_LPTIM1 | RCC_PERIPHCLK_LPTIM2 | RCC_PERIPHCLK_SAI1 | RCC_PERIPHCLK_USB | \ + RCC_PERIPHCLK_RNG | RCC_PERIPHCLK_ADC | RCC_PERIPHCLK_SWPMI1 | \ + RCC_PERIPHCLK_RTC ; + +#elif defined(STM32L433xx) || defined(STM32L443xx) + + PeriphClkInit->PeriphClockSelection = RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_USART2 | RCC_PERIPHCLK_USART3 | \ + RCC_PERIPHCLK_LPUART1 | RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_I2C2 | RCC_PERIPHCLK_I2C3 | \ + RCC_PERIPHCLK_LPTIM1 | RCC_PERIPHCLK_LPTIM2 | RCC_PERIPHCLK_SAI1 | RCC_PERIPHCLK_USB | \ + RCC_PERIPHCLK_SDMMC1 | RCC_PERIPHCLK_RNG | RCC_PERIPHCLK_ADC | RCC_PERIPHCLK_SWPMI1 | \ + RCC_PERIPHCLK_RTC ; + +#elif defined(STM32L451xx) + + PeriphClkInit->PeriphClockSelection = RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_USART2 | RCC_PERIPHCLK_USART3 | RCC_PERIPHCLK_UART4 | \ + RCC_PERIPHCLK_LPUART1 | RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_I2C2 | RCC_PERIPHCLK_I2C3 | RCC_PERIPHCLK_I2C4 | \ + RCC_PERIPHCLK_LPTIM1 | RCC_PERIPHCLK_LPTIM2 | RCC_PERIPHCLK_SAI1 | \ + RCC_PERIPHCLK_SDMMC1 | RCC_PERIPHCLK_RNG | RCC_PERIPHCLK_ADC | RCC_PERIPHCLK_DFSDM1 | \ + RCC_PERIPHCLK_RTC ; + +#elif defined(STM32L452xx) || defined(STM32L462xx) + + PeriphClkInit->PeriphClockSelection = RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_USART2 | RCC_PERIPHCLK_USART3 | RCC_PERIPHCLK_UART4 | \ + RCC_PERIPHCLK_LPUART1 | RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_I2C2 | RCC_PERIPHCLK_I2C3 | RCC_PERIPHCLK_I2C4 | \ + RCC_PERIPHCLK_LPTIM1 | RCC_PERIPHCLK_LPTIM2 | RCC_PERIPHCLK_SAI1 | RCC_PERIPHCLK_USB | \ + RCC_PERIPHCLK_SDMMC1 | RCC_PERIPHCLK_RNG | RCC_PERIPHCLK_ADC | RCC_PERIPHCLK_DFSDM1 | \ + RCC_PERIPHCLK_RTC ; + +#elif defined(STM32L471xx) + + PeriphClkInit->PeriphClockSelection = RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_USART2 | RCC_PERIPHCLK_USART3 | RCC_PERIPHCLK_UART4 | RCC_PERIPHCLK_UART5 | \ + RCC_PERIPHCLK_LPUART1 | RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_I2C2 | RCC_PERIPHCLK_I2C3 | \ + RCC_PERIPHCLK_LPTIM1 | RCC_PERIPHCLK_LPTIM2 | RCC_PERIPHCLK_SAI1 | RCC_PERIPHCLK_SAI2 | \ + RCC_PERIPHCLK_SDMMC1 | RCC_PERIPHCLK_RNG | RCC_PERIPHCLK_ADC | RCC_PERIPHCLK_SWPMI1 | RCC_PERIPHCLK_DFSDM1 | \ + RCC_PERIPHCLK_RTC ; + +#elif defined(STM32L475xx) || defined(STM32L476xx) || defined(STM32L485xx) || defined(STM32L486xx) + + PeriphClkInit->PeriphClockSelection = RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_USART2 | RCC_PERIPHCLK_USART3 | RCC_PERIPHCLK_UART4 | RCC_PERIPHCLK_UART5 | \ + RCC_PERIPHCLK_LPUART1 | RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_I2C2 | RCC_PERIPHCLK_I2C3 | \ + RCC_PERIPHCLK_LPTIM1 | RCC_PERIPHCLK_LPTIM2 | RCC_PERIPHCLK_SAI1 | RCC_PERIPHCLK_SAI2 | RCC_PERIPHCLK_USB | \ + RCC_PERIPHCLK_SDMMC1 | RCC_PERIPHCLK_RNG | RCC_PERIPHCLK_ADC | RCC_PERIPHCLK_SWPMI1 | RCC_PERIPHCLK_DFSDM1 | \ + RCC_PERIPHCLK_RTC ; + +#elif defined(STM32L496xx) || defined(STM32L4A6xx) + + PeriphClkInit->PeriphClockSelection = RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_USART2 | RCC_PERIPHCLK_USART3 | RCC_PERIPHCLK_UART4 | RCC_PERIPHCLK_UART5 | \ + RCC_PERIPHCLK_LPUART1 | RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_I2C2 | RCC_PERIPHCLK_I2C3 | RCC_PERIPHCLK_I2C4 | \ + RCC_PERIPHCLK_LPTIM1 | RCC_PERIPHCLK_LPTIM2 | RCC_PERIPHCLK_SAI1 | RCC_PERIPHCLK_SAI2 | RCC_PERIPHCLK_USB | \ + RCC_PERIPHCLK_SDMMC1 | RCC_PERIPHCLK_RNG | RCC_PERIPHCLK_ADC | RCC_PERIPHCLK_SWPMI1 | RCC_PERIPHCLK_DFSDM1 | \ + RCC_PERIPHCLK_RTC ; + +#elif defined(STM32L4R5xx) || defined(STM32L4S5xx) + + PeriphClkInit->PeriphClockSelection = RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_USART2 | RCC_PERIPHCLK_USART3 | RCC_PERIPHCLK_UART4 | RCC_PERIPHCLK_UART5 | \ + RCC_PERIPHCLK_LPUART1 | RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_I2C2 | RCC_PERIPHCLK_I2C3 | RCC_PERIPHCLK_I2C4 | \ + RCC_PERIPHCLK_LPTIM1 | RCC_PERIPHCLK_LPTIM2 | RCC_PERIPHCLK_SAI1 | RCC_PERIPHCLK_SAI2 | RCC_PERIPHCLK_USB | \ + RCC_PERIPHCLK_SDMMC1 | RCC_PERIPHCLK_RNG | RCC_PERIPHCLK_ADC | RCC_PERIPHCLK_DFSDM1 | \ + RCC_PERIPHCLK_DFSDM1AUDIO | RCC_PERIPHCLK_RTC | RCC_PERIPHCLK_OSPI; + +#elif defined(STM32L4R7xx) || defined(STM32L4S7xx) || defined(STM32L4Q5xx) + + PeriphClkInit->PeriphClockSelection = RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_USART2 | RCC_PERIPHCLK_USART3 | RCC_PERIPHCLK_UART4 | RCC_PERIPHCLK_UART5 | \ + RCC_PERIPHCLK_LPUART1 | RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_I2C2 | RCC_PERIPHCLK_I2C3 | RCC_PERIPHCLK_I2C4 | \ + RCC_PERIPHCLK_LPTIM1 | RCC_PERIPHCLK_LPTIM2 | RCC_PERIPHCLK_SAI1 | RCC_PERIPHCLK_SAI2 | RCC_PERIPHCLK_USB | \ + RCC_PERIPHCLK_SDMMC1 | RCC_PERIPHCLK_RNG | RCC_PERIPHCLK_ADC | RCC_PERIPHCLK_DFSDM1 | \ + RCC_PERIPHCLK_DFSDM1AUDIO | RCC_PERIPHCLK_RTC | RCC_PERIPHCLK_OSPI | RCC_PERIPHCLK_LTDC; + +#elif defined(STM32L4R9xx) || defined(STM32L4S9xx) + + PeriphClkInit->PeriphClockSelection = RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_USART2 | RCC_PERIPHCLK_USART3 | RCC_PERIPHCLK_UART4 | RCC_PERIPHCLK_UART5 | \ + RCC_PERIPHCLK_LPUART1 | RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_I2C2 | RCC_PERIPHCLK_I2C3 | RCC_PERIPHCLK_I2C4 | \ + RCC_PERIPHCLK_LPTIM1 | RCC_PERIPHCLK_LPTIM2 | RCC_PERIPHCLK_SAI1 | RCC_PERIPHCLK_SAI2 | RCC_PERIPHCLK_USB | \ + RCC_PERIPHCLK_SDMMC1 | RCC_PERIPHCLK_RNG | RCC_PERIPHCLK_ADC | RCC_PERIPHCLK_DFSDM1 | \ + RCC_PERIPHCLK_DFSDM1AUDIO | RCC_PERIPHCLK_RTC | RCC_PERIPHCLK_OSPI | RCC_PERIPHCLK_LTDC | RCC_PERIPHCLK_DSI; + +#endif /* STM32L431xx */ + +#if defined(RCC_PLLSAI1_SUPPORT) + + /* Get the PLLSAI1 Clock configuration -----------------------------------------------*/ + + PeriphClkInit->PLLSAI1.PLLSAI1Source = READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC) >> RCC_PLLCFGR_PLLSRC_Pos; +#if defined(RCC_PLLSAI1M_DIV_1_16_SUPPORT) + PeriphClkInit->PLLSAI1.PLLSAI1M = (READ_BIT(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1M) >> RCC_PLLSAI1CFGR_PLLSAI1M_Pos) + 1U; +#else + PeriphClkInit->PLLSAI1.PLLSAI1M = (READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLM) >> RCC_PLLCFGR_PLLM_Pos) + 1U; +#endif /* RCC_PLLSAI1M_DIV_1_16_SUPPORT */ + PeriphClkInit->PLLSAI1.PLLSAI1N = READ_BIT(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1N) >> RCC_PLLSAI1CFGR_PLLSAI1N_Pos; + PeriphClkInit->PLLSAI1.PLLSAI1P = ((READ_BIT(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1P) >> RCC_PLLSAI1CFGR_PLLSAI1P_Pos) << 4U) + 7U; + PeriphClkInit->PLLSAI1.PLLSAI1Q = ((READ_BIT(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1Q) >> RCC_PLLSAI1CFGR_PLLSAI1Q_Pos) + 1U) * 2U; + PeriphClkInit->PLLSAI1.PLLSAI1R = ((READ_BIT(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1R) >> RCC_PLLSAI1CFGR_PLLSAI1R_Pos) + 1U) * 2U; + +#endif /* RCC_PLLSAI1_SUPPORT */ + +#if defined(RCC_PLLSAI2_SUPPORT) + + /* Get the PLLSAI2 Clock configuration -----------------------------------------------*/ + + PeriphClkInit->PLLSAI2.PLLSAI2Source = PeriphClkInit->PLLSAI1.PLLSAI1Source; +#if defined(RCC_PLLSAI2M_DIV_1_16_SUPPORT) + PeriphClkInit->PLLSAI2.PLLSAI2M = (READ_BIT(RCC->PLLSAI2CFGR, RCC_PLLSAI2CFGR_PLLSAI2M) >> RCC_PLLSAI2CFGR_PLLSAI2M_Pos) + 1U; +#else + PeriphClkInit->PLLSAI2.PLLSAI2M = PeriphClkInit->PLLSAI1.PLLSAI1M; +#endif /* RCC_PLLSAI2M_DIV_1_16_SUPPORT */ + PeriphClkInit->PLLSAI2.PLLSAI2N = READ_BIT(RCC->PLLSAI2CFGR, RCC_PLLSAI2CFGR_PLLSAI2N) >> RCC_PLLSAI2CFGR_PLLSAI2N_Pos; + PeriphClkInit->PLLSAI2.PLLSAI2P = ((READ_BIT(RCC->PLLSAI2CFGR, RCC_PLLSAI2CFGR_PLLSAI2P) >> RCC_PLLSAI2CFGR_PLLSAI2P_Pos) << 4U) + 7U; +#if defined(RCC_PLLSAI2Q_DIV_SUPPORT) + PeriphClkInit->PLLSAI2.PLLSAI2Q = ((READ_BIT(RCC->PLLSAI2CFGR, RCC_PLLSAI2CFGR_PLLSAI2Q) >> RCC_PLLSAI2CFGR_PLLSAI2Q_Pos) + 1U) * 2U; +#endif /* RCC_PLLSAI2Q_DIV_SUPPORT */ + PeriphClkInit->PLLSAI2.PLLSAI2R = ((READ_BIT(RCC->PLLSAI2CFGR, RCC_PLLSAI2CFGR_PLLSAI2R)>> RCC_PLLSAI2CFGR_PLLSAI2R_Pos) + 1U) * 2U; + +#endif /* RCC_PLLSAI2_SUPPORT */ + + /* Get the USART1 clock source ---------------------------------------------*/ + PeriphClkInit->Usart1ClockSelection = __HAL_RCC_GET_USART1_SOURCE(); + /* Get the USART2 clock source ---------------------------------------------*/ + PeriphClkInit->Usart2ClockSelection = __HAL_RCC_GET_USART2_SOURCE(); + +#if defined(USART3) + /* Get the USART3 clock source ---------------------------------------------*/ + PeriphClkInit->Usart3ClockSelection = __HAL_RCC_GET_USART3_SOURCE(); +#endif /* USART3 */ + +#if defined(UART4) + /* Get the UART4 clock source ----------------------------------------------*/ + PeriphClkInit->Uart4ClockSelection = __HAL_RCC_GET_UART4_SOURCE(); +#endif /* UART4 */ + +#if defined(UART5) + /* Get the UART5 clock source ----------------------------------------------*/ + PeriphClkInit->Uart5ClockSelection = __HAL_RCC_GET_UART5_SOURCE(); +#endif /* UART5 */ + + /* Get the LPUART1 clock source --------------------------------------------*/ + PeriphClkInit->Lpuart1ClockSelection = __HAL_RCC_GET_LPUART1_SOURCE(); + + /* Get the I2C1 clock source -----------------------------------------------*/ + PeriphClkInit->I2c1ClockSelection = __HAL_RCC_GET_I2C1_SOURCE(); + +#if defined(I2C2) + /* Get the I2C2 clock source ----------------------------------------------*/ + PeriphClkInit->I2c2ClockSelection = __HAL_RCC_GET_I2C2_SOURCE(); +#endif /* I2C2 */ + + /* Get the I2C3 clock source -----------------------------------------------*/ + PeriphClkInit->I2c3ClockSelection = __HAL_RCC_GET_I2C3_SOURCE(); + +#if defined(I2C4) + /* Get the I2C4 clock source -----------------------------------------------*/ + PeriphClkInit->I2c4ClockSelection = __HAL_RCC_GET_I2C4_SOURCE(); +#endif /* I2C4 */ + + /* Get the LPTIM1 clock source ---------------------------------------------*/ + PeriphClkInit->Lptim1ClockSelection = __HAL_RCC_GET_LPTIM1_SOURCE(); + + /* Get the LPTIM2 clock source ---------------------------------------------*/ + PeriphClkInit->Lptim2ClockSelection = __HAL_RCC_GET_LPTIM2_SOURCE(); + +#if defined(SAI1) + /* Get the SAI1 clock source -----------------------------------------------*/ + PeriphClkInit->Sai1ClockSelection = __HAL_RCC_GET_SAI1_SOURCE(); +#endif /* SAI1 */ + +#if defined(SAI2) + /* Get the SAI2 clock source -----------------------------------------------*/ + PeriphClkInit->Sai2ClockSelection = __HAL_RCC_GET_SAI2_SOURCE(); +#endif /* SAI2 */ + + /* Get the RTC clock source ------------------------------------------------*/ + PeriphClkInit->RTCClockSelection = __HAL_RCC_GET_RTC_SOURCE(); + +#if defined(USB_OTG_FS) || defined(USB) + /* Get the USB clock source ------------------------------------------------*/ + PeriphClkInit->UsbClockSelection = __HAL_RCC_GET_USB_SOURCE(); +#endif /* USB_OTG_FS || USB */ + +#if defined(SDMMC1) + /* Get the SDMMC1 clock source ---------------------------------------------*/ + PeriphClkInit->Sdmmc1ClockSelection = __HAL_RCC_GET_SDMMC1_SOURCE(); +#endif /* SDMMC1 */ + + /* Get the RNG clock source ------------------------------------------------*/ + PeriphClkInit->RngClockSelection = __HAL_RCC_GET_RNG_SOURCE(); + +#if !defined(STM32L412xx) && !defined(STM32L422xx) + /* Get the ADC clock source ------------------------------------------------*/ + PeriphClkInit->AdcClockSelection = __HAL_RCC_GET_ADC_SOURCE(); +#endif /* !STM32L412xx && !STM32L422xx */ + +#if defined(SWPMI1) + /* Get the SWPMI1 clock source ---------------------------------------------*/ + PeriphClkInit->Swpmi1ClockSelection = __HAL_RCC_GET_SWPMI1_SOURCE(); +#endif /* SWPMI1 */ + +#if defined(DFSDM1_Filter0) + /* Get the DFSDM1 clock source ---------------------------------------------*/ + PeriphClkInit->Dfsdm1ClockSelection = __HAL_RCC_GET_DFSDM1_SOURCE(); + +#if defined(STM32L4R5xx) || defined(STM32L4R7xx) || defined(STM32L4R9xx) || defined(STM32L4S5xx) || defined(STM32L4S7xx) || defined(STM32L4S9xx) + /* Get the DFSDM1 audio clock source ---------------------------------------*/ + PeriphClkInit->Dfsdm1AudioClockSelection = __HAL_RCC_GET_DFSDM1AUDIO_SOURCE(); +#endif /* STM32L4R5xx || STM32L4R7xx || STM32L4R9xx || STM32L4S5xx || STM32L4S7xx || STM32L4S9xx */ +#endif /* DFSDM1_Filter0 */ + +#if defined(LTDC) + /* Get the LTDC clock source -----------------------------------------------*/ + PeriphClkInit->LtdcClockSelection = __HAL_RCC_GET_LTDC_SOURCE(); +#endif /* LTDC */ + +#if defined(DSI) + /* Get the DSI clock source ------------------------------------------------*/ + PeriphClkInit->DsiClockSelection = __HAL_RCC_GET_DSI_SOURCE(); +#endif /* DSI */ + +#if defined(OCTOSPI1) || defined(OCTOSPI2) + /* Get the OctoSPIclock source --------------------------------------------*/ + PeriphClkInit->OspiClockSelection = __HAL_RCC_GET_OSPI_SOURCE(); +#endif /* OCTOSPI1 || OCTOSPI2 */ +} + +/** + * @brief Return the peripheral clock frequency for peripherals with clock source from PLLSAIs + * @note Return 0 if peripheral clock identifier not managed by this API + * @param PeriphClk Peripheral clock identifier + * This parameter can be one of the following values: + * @arg @ref RCC_PERIPHCLK_RTC RTC peripheral clock + * @arg @ref RCC_PERIPHCLK_ADC ADC peripheral clock + @if STM32L462xx + * @arg @ref RCC_PERIPHCLK_DFSDM1 DFSDM1 peripheral clock (only for devices with DFSDM) + @endif + @if STM32L486xx + * @arg @ref RCC_PERIPHCLK_DFSDM1 DFSDM1 peripheral clock (only for devices with DFSDM) + @endif + @if STM32L4A6xx + * @arg @ref RCC_PERIPHCLK_DFSDM1 DFSDM1 peripheral clock (only for devices with DFSDM) + @endif + * @arg @ref RCC_PERIPHCLK_I2C1 I2C1 peripheral clock + * @arg @ref RCC_PERIPHCLK_I2C2 I2C2 peripheral clock + * @arg @ref RCC_PERIPHCLK_I2C3 I2C3 peripheral clock + @if STM32L462xx + * @arg @ref RCC_PERIPHCLK_I2C4 I2C4 peripheral clock (only for devices with I2C4) + @endif + @if STM32L4A6xx + * @arg @ref RCC_PERIPHCLK_I2C4 I2C4 peripheral clock (only for devices with I2C4) + @endif + @if STM32L4S9xx + * @arg @ref RCC_PERIPHCLK_I2C4 I2C4 peripheral clock (only for devices with I2C4) + @endif + * @arg @ref RCC_PERIPHCLK_LPTIM1 LPTIM1 peripheral clock + * @arg @ref RCC_PERIPHCLK_LPTIM2 LPTIM2 peripheral clock + * @arg @ref RCC_PERIPHCLK_LPUART1 LPUART1 peripheral clock + * @arg @ref RCC_PERIPHCLK_RNG RNG peripheral clock + * @arg @ref RCC_PERIPHCLK_SAI1 SAI1 peripheral clock (only for devices with SAI1) + @if STM32L486xx + * @arg @ref RCC_PERIPHCLK_SAI2 SAI2 peripheral clock (only for devices with SAI2) + @endif + @if STM32L4A6xx + * @arg @ref RCC_PERIPHCLK_SAI2 SAI2 peripheral clock (only for devices with SAI2) + @endif + @if STM32L4S9xx + * @arg @ref RCC_PERIPHCLK_SAI2 SAI2 peripheral clock (only for devices with SAI2) + @endif + * @arg @ref RCC_PERIPHCLK_SDMMC1 SDMMC1 peripheral clock + @if STM32L443xx + * @arg @ref RCC_PERIPHCLK_SWPMI1 SWPMI1 peripheral clock (only for devices with SWPMI1) + @endif + @if STM32L486xx + * @arg @ref RCC_PERIPHCLK_SWPMI1 SWPMI1 peripheral clock (only for devices with SWPMI1) + @endif + @if STM32L4A6xx + * @arg @ref RCC_PERIPHCLK_SWPMI1 SWPMI1 peripheral clock (only for devices with SWPMI1) + @endif + * @arg @ref RCC_PERIPHCLK_USART1 USART1 peripheral clock + * @arg @ref RCC_PERIPHCLK_USART2 USART1 peripheral clock + * @arg @ref RCC_PERIPHCLK_USART3 USART1 peripheral clock + @if STM32L462xx + * @arg @ref RCC_PERIPHCLK_UART4 UART4 peripheral clock (only for devices with UART4) + * @arg @ref RCC_PERIPHCLK_USB USB peripheral clock (only for devices with USB) + @endif + @if STM32L486xx + * @arg @ref RCC_PERIPHCLK_UART4 UART4 peripheral clock (only for devices with UART4) + * @arg @ref RCC_PERIPHCLK_UART5 UART5 peripheral clock (only for devices with UART5) + * @arg @ref RCC_PERIPHCLK_USB USB peripheral clock (only for devices with USB) + @endif + @if STM32L4A6xx + * @arg @ref RCC_PERIPHCLK_UART4 UART4 peripheral clock (only for devices with UART4) + * @arg @ref RCC_PERIPHCLK_UART5 UART5 peripheral clock (only for devices with UART5) + * @arg @ref RCC_PERIPHCLK_USB USB peripheral clock (only for devices with USB) + @endif + @if STM32L4S9xx + * @arg @ref RCC_PERIPHCLK_UART4 USART1 peripheral clock (only for devices with UART4) + * @arg @ref RCC_PERIPHCLK_UART5 USART1 peripheral clock (only for devices with UART5) + * @arg @ref RCC_PERIPHCLK_USB USB peripheral clock (only for devices with USB) + * @arg @ref RCC_PERIPHCLK_DFSDM1 DFSDM1 peripheral kernel clock (only for devices with DFSDM1) + * @arg @ref RCC_PERIPHCLK_DFSDM1AUDIO DFSDM1 peripheral audio clock (only for devices with DFSDM1) + * @arg @ref RCC_PERIPHCLK_LTDC LTDC peripheral clock (only for devices with LTDC) + * @arg @ref RCC_PERIPHCLK_DSI DSI peripheral clock (only for devices with DSI) + * @arg @ref RCC_PERIPHCLK_OSPI OctoSPI peripheral clock (only for devices with OctoSPI) + @endif + * @retval Frequency in Hz + */ +uint32_t HAL_RCCEx_GetPeriphCLKFreq(uint32_t PeriphClk) +{ + uint32_t frequency = 0U; + uint32_t srcclk, pll_oscsource, pllvco, plln; /* no init needed */ +#if defined(SDMMC1) && defined(RCC_CCIPR2_SDMMCSEL) + uint32_t pllp; /* no init needed */ +#endif + + /* Check the parameters */ + assert_param(IS_RCC_PERIPHCLOCK(PeriphClk)); + + if(PeriphClk == RCC_PERIPHCLK_RTC) + { + /* Get the current RTC source */ + srcclk = __HAL_RCC_GET_RTC_SOURCE(); + + switch(srcclk) + { + case RCC_RTCCLKSOURCE_LSE: + /* Check if LSE is ready */ + if(HAL_IS_BIT_SET(RCC->BDCR, RCC_BDCR_LSERDY)) + { + frequency = LSE_VALUE; + } + break; + case RCC_RTCCLKSOURCE_LSI: + /* Check if LSI is ready */ + if(HAL_IS_BIT_SET(RCC->CSR, RCC_CSR_LSIRDY)) + { +#if defined(RCC_CSR_LSIPREDIV) + if(HAL_IS_BIT_SET(RCC->CSR, RCC_CSR_LSIPREDIV)) + { + frequency = LSI_VALUE/128U; + } + else +#endif /* RCC_CSR_LSIPREDIV */ + { + frequency = LSI_VALUE; + } + } + break; + case RCC_RTCCLKSOURCE_HSE_DIV32: + /* Check if HSE is ready */ + if(HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSERDY)) + { + frequency = HSE_VALUE / 32U; + } + break; + default: + /* No clock source, frequency default init at 0 */ + break; + } + } + else + { + /* Other external peripheral clock source than RTC */ + pll_oscsource = __HAL_RCC_GET_PLL_OSCSOURCE(); + + /* Compute PLL clock input */ + switch(pll_oscsource) + { + case RCC_PLLSOURCE_MSI: /* MSI ? */ + if(HAL_IS_BIT_SET(RCC->CR, RCC_CR_MSIRDY)) + { + /*MSI frequency range in HZ*/ + pllvco = MSIRangeTable[(__HAL_RCC_GET_MSI_RANGE() >> 4U)]; + } + else + { + pllvco = 0U; + } + break; + case RCC_PLLSOURCE_HSI: /* HSI ? */ + if(HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSIRDY)) + { + pllvco = HSI_VALUE; + } + else + { + pllvco = 0U; + } + break; + case RCC_PLLSOURCE_HSE: /* HSE ? */ + if(HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSERDY)) + { + pllvco = HSE_VALUE; + } + else + { + pllvco = 0U; + } + break; + default: + /* No source */ + pllvco = 0U; + break; + } + + switch(PeriphClk) + { +#if defined(SAI1) + + case RCC_PERIPHCLK_SAI1: + frequency = RCCEx_GetSAIxPeriphCLKFreq(RCC_PERIPHCLK_SAI1, pllvco); + break; + +#endif + +#if defined(SAI2) + + case RCC_PERIPHCLK_SAI2: + frequency = RCCEx_GetSAIxPeriphCLKFreq(RCC_PERIPHCLK_SAI2, pllvco); + break; + +#endif + +#if defined(USB_OTG_FS) || defined(USB) + + case RCC_PERIPHCLK_USB: + +#endif /* USB_OTG_FS || USB */ + + case RCC_PERIPHCLK_RNG: + +#if defined(SDMMC1) && !defined(RCC_CCIPR2_SDMMCSEL) + + case RCC_PERIPHCLK_SDMMC1: + +#endif /* SDMMC1 && !RCC_CCIPR2_SDMMCSEL */ + { + srcclk = READ_BIT(RCC->CCIPR, RCC_CCIPR_CLK48SEL); + + switch(srcclk) + { + case RCC_CCIPR_CLK48SEL: /* MSI ? */ + if(HAL_IS_BIT_SET(RCC->CR, RCC_CR_MSIRDY)) + { + /*MSI frequency range in HZ*/ + frequency = MSIRangeTable[(__HAL_RCC_GET_MSI_RANGE() >> 4U)]; + } + break; + case RCC_CCIPR_CLK48SEL_1: /* PLL ? */ + if(HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLLRDY)) + { + if(HAL_IS_BIT_SET(RCC->PLLCFGR, RCC_PLLCFGR_PLLQEN)) + { + /* f(PLL Source) * PLLN / PLLM */ + plln = READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLN) >> RCC_PLLCFGR_PLLN_Pos; + pllvco = ((pllvco * plln) / ((READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLM) >> RCC_PLLCFGR_PLLM_Pos) + 1U)); + /* f(PLL48M1CLK) = f(VCO input) / PLLQ */ + frequency = (pllvco / (((READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLQ) >> RCC_PLLCFGR_PLLQ_Pos) + 1U) << 1U)); + } + } + break; +#if defined(RCC_PLLSAI1_SUPPORT) + case RCC_CCIPR_CLK48SEL_0: /* PLLSAI1 ? */ + if(HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLLSAI1RDY)) + { + if(HAL_IS_BIT_SET(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1QEN)) + { + plln = READ_BIT(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1N) >> RCC_PLLSAI1CFGR_PLLSAI1N_Pos; +#if defined(RCC_PLLSAI1M_DIV_1_16_SUPPORT) + /* PLLSAI1M exists: apply PLLSAI1M divider for PLLSAI1 output computation */ + /* f(PLLSAI1 Source) * PLLSAI1N / PLLSAI1M */ + pllvco = ((pllvco * plln) / ((READ_BIT(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1M) >> RCC_PLLSAI1CFGR_PLLSAI1M_Pos) + 1U)); +#else + /* f(PLL Source) * PLLSAI1N / PLLM */ + pllvco = ((pllvco * plln) / ((READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLM) >> RCC_PLLCFGR_PLLM_Pos) + 1U)); +#endif + /* f(PLL48M2CLK) = f(VCOSAI1 input) / PLLSAI1Q */ + frequency = (pllvco / (((READ_BIT(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1Q) >> RCC_PLLSAI1CFGR_PLLSAI1Q_Pos) + 1U) << 1U)); + } + } + break; +#endif /* RCC_PLLSAI1_SUPPORT */ +#if defined(RCC_HSI48_SUPPORT) + case 0U: + if(HAL_IS_BIT_SET(RCC->CRRCR, RCC_CRRCR_HSI48RDY)) /* HSI48 ? */ + { + frequency = HSI48_VALUE; + } + break; +#endif /* RCC_HSI48_SUPPORT */ + default: + /* No clock source, frequency default init at 0 */ + break; + } /* switch(srcclk) */ + break; + } + +#if defined(SDMMC1) && defined(RCC_CCIPR2_SDMMCSEL) + + case RCC_PERIPHCLK_SDMMC1: + + if(HAL_IS_BIT_SET(RCC->CCIPR2, RCC_CCIPR2_SDMMCSEL)) /* PLL "P" ? */ + { + if(HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLLRDY)) + { + if(HAL_IS_BIT_SET(RCC->PLLCFGR, RCC_PLLCFGR_PLLPEN)) + { + /* f(PLL Source) * PLLN / PLLM */ + plln = READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLN) >> RCC_PLLCFGR_PLLN_Pos; + pllvco = ((pllvco * plln) / ((READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLM) >> RCC_PLLCFGR_PLLM_Pos) + 1U)); + /* f(PLLSAI3CLK) = f(VCO input) / PLLP */ + pllp = READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLPDIV) >> RCC_PLLCFGR_PLLPDIV_Pos; + if(pllp == 0U) + { + if(READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLP) != 0U) + { + pllp = 17U; + } + else + { + pllp = 7U; + } + } + frequency = (pllvco / pllp); + } + } + } + else /* 48MHz from PLL "Q" or MSI or PLLSAI1Q or HSI48 */ + { + srcclk = READ_BIT(RCC->CCIPR, RCC_CCIPR_CLK48SEL); + + switch(srcclk) + { + case RCC_CCIPR_CLK48SEL: /* MSI ? */ + if(HAL_IS_BIT_SET(RCC->CR, RCC_CR_MSIRDY)) + { + /*MSI frequency range in HZ*/ + frequency = MSIRangeTable[(__HAL_RCC_GET_MSI_RANGE() >> 4U)]; + } + break; + case RCC_CCIPR_CLK48SEL_1: /* PLL "Q" ? */ + if(HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLLRDY)) + { + if(HAL_IS_BIT_SET(RCC->PLLCFGR, RCC_PLLCFGR_PLLQEN)) + { + /* f(PLL Source) * PLLN / PLLM */ + plln = READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLN) >> RCC_PLLCFGR_PLLN_Pos; + pllvco = ((pllvco * plln) / ((READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLM) >> RCC_PLLCFGR_PLLM_Pos) + 1U)); + /* f(PLL48M1CLK) = f(VCO input) / PLLQ */ + frequency = (pllvco / (((READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLQ) >> RCC_PLLCFGR_PLLQ_Pos) + 1U) << 1U)); + } + } + break; + case RCC_CCIPR_CLK48SEL_0: /* PLLSAI1 ? */ + if(HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLLSAI1RDY)) + { + if(HAL_IS_BIT_SET(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1QEN)) + { + /* f(PLLSAI1 Source) * PLLSAI1N / PLLSAI1M */ + plln = READ_BIT(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1N) >> RCC_PLLSAI1CFGR_PLLSAI1N_Pos; + pllvco = ((pllvco * plln) / ((READ_BIT(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1M) >> RCC_PLLSAI1CFGR_PLLSAI1M_Pos) + 1U)); + /* f(PLL48M2CLK) = f(VCOSAI1 input) / PLLSAI1Q */ + frequency = (pllvco / (((READ_BIT(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1Q) >> RCC_PLLSAI1CFGR_PLLSAI1Q_Pos) + 1U) << 1U)); + } + } + break; + case 0U: + if(HAL_IS_BIT_SET(RCC->CRRCR, RCC_CRRCR_HSI48RDY)) /* HSI48 ? */ + { + frequency = HSI48_VALUE; + } + break; + default: + /* No clock source, frequency default init at 0 */ + break; + } /* switch(srcclk) */ + } + break; + +#endif /* SDMMC1 && RCC_CCIPR2_SDMMCSEL */ + + case RCC_PERIPHCLK_USART1: + { + /* Get the current USART1 source */ + srcclk = __HAL_RCC_GET_USART1_SOURCE(); + + switch(srcclk) + { + case RCC_USART1CLKSOURCE_PCLK2: + frequency = HAL_RCC_GetPCLK2Freq(); + break; + case RCC_USART1CLKSOURCE_SYSCLK: + frequency = HAL_RCC_GetSysClockFreq(); + break; + case RCC_USART1CLKSOURCE_HSI: + if(HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSIRDY)) + { + frequency = HSI_VALUE; + } + break; + case RCC_USART1CLKSOURCE_LSE: + if(HAL_IS_BIT_SET(RCC->BDCR, RCC_BDCR_LSERDY)) + { + frequency = LSE_VALUE; + } + break; + default: + /* No clock source, frequency default init at 0 */ + break; + } + + break; + } + + case RCC_PERIPHCLK_USART2: + { + /* Get the current USART2 source */ + srcclk = __HAL_RCC_GET_USART2_SOURCE(); + + switch(srcclk) + { + case RCC_USART2CLKSOURCE_PCLK1: + frequency = HAL_RCC_GetPCLK1Freq(); + break; + case RCC_USART2CLKSOURCE_SYSCLK: + frequency = HAL_RCC_GetSysClockFreq(); + break; + case RCC_USART2CLKSOURCE_HSI: + if(HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSIRDY)) + { + frequency = HSI_VALUE; + } + break; + case RCC_USART2CLKSOURCE_LSE: + if(HAL_IS_BIT_SET(RCC->BDCR, RCC_BDCR_LSERDY)) + { + frequency = LSE_VALUE; + } + break; + default: + /* No clock source, frequency default init at 0 */ + break; + } + + break; + } + +#if defined(USART3) + + case RCC_PERIPHCLK_USART3: + { + /* Get the current USART3 source */ + srcclk = __HAL_RCC_GET_USART3_SOURCE(); + + switch(srcclk) + { + case RCC_USART3CLKSOURCE_PCLK1: + frequency = HAL_RCC_GetPCLK1Freq(); + break; + case RCC_USART3CLKSOURCE_SYSCLK: + frequency = HAL_RCC_GetSysClockFreq(); + break; + case RCC_USART3CLKSOURCE_HSI: + if(HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSIRDY)) + { + frequency = HSI_VALUE; + } + break; + case RCC_USART3CLKSOURCE_LSE: + if(HAL_IS_BIT_SET(RCC->BDCR, RCC_BDCR_LSERDY)) + { + frequency = LSE_VALUE; + } + break; + default: + /* No clock source, frequency default init at 0 */ + break; + } + + break; + } + +#endif /* USART3 */ + +#if defined(UART4) + + case RCC_PERIPHCLK_UART4: + { + /* Get the current UART4 source */ + srcclk = __HAL_RCC_GET_UART4_SOURCE(); + + switch(srcclk) + { + case RCC_UART4CLKSOURCE_PCLK1: + frequency = HAL_RCC_GetPCLK1Freq(); + break; + case RCC_UART4CLKSOURCE_SYSCLK: + frequency = HAL_RCC_GetSysClockFreq(); + break; + case RCC_UART4CLKSOURCE_HSI: + if(HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSIRDY)) + { + frequency = HSI_VALUE; + } + break; + case RCC_UART4CLKSOURCE_LSE: + if(HAL_IS_BIT_SET(RCC->BDCR, RCC_BDCR_LSERDY)) + { + frequency = LSE_VALUE; + } + break; + default: + /* No clock source, frequency default init at 0 */ + break; + } + + break; + } + +#endif /* UART4 */ + +#if defined(UART5) + + case RCC_PERIPHCLK_UART5: + { + /* Get the current UART5 source */ + srcclk = __HAL_RCC_GET_UART5_SOURCE(); + + switch(srcclk) + { + case RCC_UART5CLKSOURCE_PCLK1: + frequency = HAL_RCC_GetPCLK1Freq(); + break; + case RCC_UART5CLKSOURCE_SYSCLK: + frequency = HAL_RCC_GetSysClockFreq(); + break; + case RCC_UART5CLKSOURCE_HSI: + if(HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSIRDY)) + { + frequency = HSI_VALUE; + } + break; + case RCC_UART5CLKSOURCE_LSE: + if(HAL_IS_BIT_SET(RCC->BDCR, RCC_BDCR_LSERDY)) + { + frequency = LSE_VALUE; + } + break; + default: + /* No clock source, frequency default init at 0 */ + break; + } + + break; + } + +#endif /* UART5 */ + + case RCC_PERIPHCLK_LPUART1: + { + /* Get the current LPUART1 source */ + srcclk = __HAL_RCC_GET_LPUART1_SOURCE(); + + switch(srcclk) + { + case RCC_LPUART1CLKSOURCE_PCLK1: + frequency = HAL_RCC_GetPCLK1Freq(); + break; + case RCC_LPUART1CLKSOURCE_SYSCLK: + frequency = HAL_RCC_GetSysClockFreq(); + break; + case RCC_LPUART1CLKSOURCE_HSI: + if(HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSIRDY)) + { + frequency = HSI_VALUE; + } + break; + case RCC_LPUART1CLKSOURCE_LSE: + if(HAL_IS_BIT_SET(RCC->BDCR, RCC_BDCR_LSERDY)) + { + frequency = LSE_VALUE; + } + break; + default: + /* No clock source, frequency default init at 0 */ + break; + } + + break; + } + + case RCC_PERIPHCLK_ADC: + { + srcclk = __HAL_RCC_GET_ADC_SOURCE(); + + switch(srcclk) + { + case RCC_ADCCLKSOURCE_SYSCLK: + frequency = HAL_RCC_GetSysClockFreq(); + break; +#if defined(RCC_PLLSAI1_SUPPORT) + case RCC_ADCCLKSOURCE_PLLSAI1: + if(HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLLSAI1RDY) && (__HAL_RCC_GET_PLLSAI1CLKOUT_CONFIG(RCC_PLLSAI1_ADC1CLK) != 0U)) + { + plln = READ_BIT(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1N) >> RCC_PLLSAI1CFGR_PLLSAI1N_Pos; +#if defined(RCC_PLLSAI1M_DIV_1_16_SUPPORT) + /* PLLSAI1M exists: apply PLLSAI1M divider for PLLSAI1 output computation */ + /* f(PLLSAI1 Source) * PLLSAI1N / PLLSAI1M */ + pllvco = ((pllvco * plln) / ((READ_BIT(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1M) >> RCC_PLLSAI1CFGR_PLLSAI1M_Pos) + 1U)); +#else + /* f(PLL Source) * PLLSAI1N / PLLM */ + pllvco = ((pllvco * plln) / ((READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLM) >> RCC_PLLCFGR_PLLM_Pos) + 1U)); +#endif + /* f(PLLADC1CLK) = f(VCOSAI1 input) / PLLSAI1R */ + frequency = (pllvco / (((READ_BIT(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1R) >> RCC_PLLSAI1CFGR_PLLSAI1R_Pos) + 1U) << 1U)); + } + break; +#endif /* RCC_PLLSAI1_SUPPORT */ +#if defined(STM32L471xx) || defined(STM32L475xx) || defined(STM32L476xx) || defined(STM32L485xx) || defined(STM32L486xx) || defined(STM32L496xx) || defined(STM32L4A6xx) + case RCC_ADCCLKSOURCE_PLLSAI2: + if(HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLLSAI2RDY) && (__HAL_RCC_GET_PLLSAI2CLKOUT_CONFIG(RCC_PLLSAI2_ADC2CLK) != 0U)) + { + plln = READ_BIT(RCC->PLLSAI2CFGR, RCC_PLLSAI2CFGR_PLLSAI2N) >> RCC_PLLSAI2CFGR_PLLSAI2N_Pos; +#if defined(RCC_PLLSAI2M_DIV_1_16_SUPPORT) + /* PLLSAI2M exists: apply PLLSAI2M divider for PLLSAI2 output computation */ + /* f(PLLSAI2 Source) * PLLSAI2N / PLLSAI2M */ + pllvco = ((pllvco * plln) / ((READ_BIT(RCC->PLLSAI2CFGR, RCC_PLLSAI2CFGR_PLLSAI2M) >> RCC_PLLSAI2CFGR_PLLSAI2M_Pos) + 1U)); +#else + /* f(PLL Source) * PLLSAI2N / PLLM */ + pllvco = ((pllvco * plln) / ((READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLM) >> RCC_PLLCFGR_PLLM_Pos) + 1U)); +#endif + /* f(PLLADC2CLK) = f(VCOSAI2 input) / PLLSAI2R */ + frequency = (pllvco / (((READ_BIT(RCC->PLLSAI2CFGR, RCC_PLLSAI2CFGR_PLLSAI2R) >> RCC_PLLSAI2CFGR_PLLSAI2R_Pos) + 1U) << 1U)); + } + break; +#endif /* STM32L471xx || STM32L475xx || STM32L476xx || STM32L485xx || STM32L486xx || STM32L496xx || STM32L4A6xx */ + default: + /* No clock source, frequency default init at 0 */ + break; + } + + break; + } + +#if defined(DFSDM1_Filter0) + + case RCC_PERIPHCLK_DFSDM1: + { + /* Get the current DFSDM1 source */ + srcclk = __HAL_RCC_GET_DFSDM1_SOURCE(); + + if(srcclk == RCC_DFSDM1CLKSOURCE_PCLK2) + { + frequency = HAL_RCC_GetPCLK2Freq(); + } + else + { + frequency = HAL_RCC_GetSysClockFreq(); + } + + break; + } + +#if defined(STM32L4R5xx) || defined(STM32L4R7xx) || defined(STM32L4R9xx) || defined(STM32L4S5xx) || defined(STM32L4S7xx) || defined(STM32L4S9xx) + + case RCC_PERIPHCLK_DFSDM1AUDIO: + { + /* Get the current DFSDM1 audio source */ + srcclk = __HAL_RCC_GET_DFSDM1AUDIO_SOURCE(); + + switch(srcclk) + { + case RCC_DFSDM1AUDIOCLKSOURCE_SAI1: + frequency = RCCEx_GetSAIxPeriphCLKFreq(RCC_PERIPHCLK_SAI1, pllvco); + break; + case RCC_DFSDM1AUDIOCLKSOURCE_MSI: + if(HAL_IS_BIT_SET(RCC->CR, RCC_CR_MSIRDY)) + { + /*MSI frequency range in HZ*/ + frequency = MSIRangeTable[(__HAL_RCC_GET_MSI_RANGE() >> 4U)]; + } + break; + case RCC_DFSDM1AUDIOCLKSOURCE_HSI: + if(HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSIRDY)) + { + frequency = HSI_VALUE; + } + break; + default: + /* No clock source, frequency default init at 0 */ + break; + } + + break; + } + +#endif /* STM32L4R5xx || STM32L4R7xx || STM32L4R9xx || STM32L4S5xx || STM32L4S7xx || STM32L4S9xx */ + +#endif /* DFSDM1_Filter0 */ + + case RCC_PERIPHCLK_I2C1: + { + /* Get the current I2C1 source */ + srcclk = __HAL_RCC_GET_I2C1_SOURCE(); + + switch(srcclk) + { + case RCC_I2C1CLKSOURCE_PCLK1: + frequency = HAL_RCC_GetPCLK1Freq(); + break; + case RCC_I2C1CLKSOURCE_SYSCLK: + frequency = HAL_RCC_GetSysClockFreq(); + break; + case RCC_I2C1CLKSOURCE_HSI: + if(HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSIRDY)) + { + frequency = HSI_VALUE; + } + break; + default: + /* No clock source, frequency default init at 0 */ + break; + } + + break; + } + +#if defined(I2C2) + + case RCC_PERIPHCLK_I2C2: + { + /* Get the current I2C2 source */ + srcclk = __HAL_RCC_GET_I2C2_SOURCE(); + + switch(srcclk) + { + case RCC_I2C2CLKSOURCE_PCLK1: + frequency = HAL_RCC_GetPCLK1Freq(); + break; + case RCC_I2C2CLKSOURCE_SYSCLK: + frequency = HAL_RCC_GetSysClockFreq(); + break; + case RCC_I2C2CLKSOURCE_HSI: + if(HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSIRDY)) + { + frequency = HSI_VALUE; + } + break; + default: + /* No clock source, frequency default init at 0 */ + break; + } + + break; + } + +#endif /* I2C2 */ + + case RCC_PERIPHCLK_I2C3: + { + /* Get the current I2C3 source */ + srcclk = __HAL_RCC_GET_I2C3_SOURCE(); + + switch(srcclk) + { + case RCC_I2C3CLKSOURCE_PCLK1: + frequency = HAL_RCC_GetPCLK1Freq(); + break; + case RCC_I2C3CLKSOURCE_SYSCLK: + frequency = HAL_RCC_GetSysClockFreq(); + break; + case RCC_I2C3CLKSOURCE_HSI: + if(HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSIRDY)) + { + frequency = HSI_VALUE; + } + break; + default: + /* No clock source, frequency default init at 0 */ + break; + } + + break; + } + +#if defined(I2C4) + + case RCC_PERIPHCLK_I2C4: + { + /* Get the current I2C4 source */ + srcclk = __HAL_RCC_GET_I2C4_SOURCE(); + + switch(srcclk) + { + case RCC_I2C4CLKSOURCE_PCLK1: + frequency = HAL_RCC_GetPCLK1Freq(); + break; + case RCC_I2C4CLKSOURCE_SYSCLK: + frequency = HAL_RCC_GetSysClockFreq(); + break; + case RCC_I2C4CLKSOURCE_HSI: + if(HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSIRDY)) + { + frequency = HSI_VALUE; + } + break; + default: + /* No clock source, frequency default init at 0 */ + break; + } + + break; + } + +#endif /* I2C4 */ + + case RCC_PERIPHCLK_LPTIM1: + { + /* Get the current LPTIM1 source */ + srcclk = __HAL_RCC_GET_LPTIM1_SOURCE(); + + switch(srcclk) + { + case RCC_LPTIM1CLKSOURCE_PCLK1: + frequency = HAL_RCC_GetPCLK1Freq(); + break; + case RCC_LPTIM1CLKSOURCE_LSI: + if(HAL_IS_BIT_SET(RCC->CSR, RCC_CSR_LSIRDY)) + { +#if defined(RCC_CSR_LSIPREDIV) + if(HAL_IS_BIT_SET(RCC->CSR, RCC_CSR_LSIPREDIV)) + { + frequency = LSI_VALUE/128U; + } + else +#endif /* RCC_CSR_LSIPREDIV */ + { + frequency = LSI_VALUE; + } + } + break; + case RCC_LPTIM1CLKSOURCE_HSI: + if(HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSIRDY)) + { + frequency = HSI_VALUE; + } + break; + case RCC_LPTIM1CLKSOURCE_LSE: + if(HAL_IS_BIT_SET(RCC->BDCR, RCC_BDCR_LSERDY)) + { + frequency = LSE_VALUE; + } + break; + default: + /* No clock source, frequency default init at 0 */ + break; + } + + break; + } + + case RCC_PERIPHCLK_LPTIM2: + { + /* Get the current LPTIM2 source */ + srcclk = __HAL_RCC_GET_LPTIM2_SOURCE(); + + switch(srcclk) + { + case RCC_LPTIM2CLKSOURCE_PCLK1: + frequency = HAL_RCC_GetPCLK1Freq(); + break; + case RCC_LPTIM2CLKSOURCE_LSI: + if(HAL_IS_BIT_SET(RCC->CSR, RCC_CSR_LSIRDY)) + { +#if defined(RCC_CSR_LSIPREDIV) + if(HAL_IS_BIT_SET(RCC->CSR, RCC_CSR_LSIPREDIV)) + { + frequency = LSI_VALUE/128U; + } + else +#endif /* RCC_CSR_LSIPREDIV */ + { + frequency = LSI_VALUE; + } + } + break; + case RCC_LPTIM2CLKSOURCE_HSI: + if(HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSIRDY)) + { + frequency = HSI_VALUE; + } + break; + case RCC_LPTIM2CLKSOURCE_LSE: + if(HAL_IS_BIT_SET(RCC->BDCR, RCC_BDCR_LSERDY)) + { + frequency = LSE_VALUE; + } + break; + default: + /* No clock source, frequency default init at 0 */ + break; + } + + break; + } + +#if defined(SWPMI1) + + case RCC_PERIPHCLK_SWPMI1: + { + /* Get the current SWPMI1 source */ + srcclk = __HAL_RCC_GET_SWPMI1_SOURCE(); + + switch(srcclk) + { + case RCC_SWPMI1CLKSOURCE_PCLK1: + frequency = HAL_RCC_GetPCLK1Freq(); + break; + case RCC_SWPMI1CLKSOURCE_HSI: + if(HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSIRDY)) + { + frequency = HSI_VALUE; + } + break; + default: + /* No clock source, frequency default init at 0 */ + break; + } + + break; + } + +#endif /* SWPMI1 */ + +#if defined(OCTOSPI1) || defined(OCTOSPI2) + + case RCC_PERIPHCLK_OSPI: + { + /* Get the current OctoSPI clock source */ + srcclk = __HAL_RCC_GET_OSPI_SOURCE(); + + switch(srcclk) + { + case RCC_OSPICLKSOURCE_SYSCLK: + frequency = HAL_RCC_GetSysClockFreq(); + break; + case RCC_OSPICLKSOURCE_MSI: + if(HAL_IS_BIT_SET(RCC->CR, RCC_CR_MSIRDY)) + { + /*MSI frequency range in HZ*/ + frequency = MSIRangeTable[(__HAL_RCC_GET_MSI_RANGE() >> 4U)]; + } + break; + case RCC_OSPICLKSOURCE_PLL: + if(HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLLRDY)) + { + if(HAL_IS_BIT_SET(RCC->PLLCFGR, RCC_PLLCFGR_PLLQEN)) + { + /* f(PLL Source) * PLLN / PLLM */ + plln = READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLN) >> RCC_PLLCFGR_PLLN_Pos; + pllvco = ((pllvco * plln) / ((READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLM) >> RCC_PLLCFGR_PLLM_Pos) + 1U)); + /* f(PLL48M1CLK) = f(VCO input) / PLLQ */ + frequency = (pllvco / (((READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLQ) >> RCC_PLLCFGR_PLLQ_Pos) + 1U) << 1U)); + } + } + break; + default: + /* No clock source, frequency default init at 0 */ + break; + } + + break; + } + +#endif /* OCTOSPI1 || OCTOSPI2 */ + + default: + break; + } + } + + return(frequency); +} + +/** + * @} + */ + +/** @defgroup RCCEx_Exported_Functions_Group2 Extended Clock management functions + * @brief Extended Clock management functions + * +@verbatim + =============================================================================== + ##### Extended clock management functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to control the + activation or deactivation of MSI PLL-mode, PLLSAI1, PLLSAI2, LSE CSS, + Low speed clock output and clock after wake-up from STOP mode. +@endverbatim + * @{ + */ + +#if defined(RCC_PLLSAI1_SUPPORT) + +/** + * @brief Enable PLLSAI1. + * @param PLLSAI1Init pointer to an RCC_PLLSAI1InitTypeDef structure that + * contains the configuration information for the PLLSAI1 + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RCCEx_EnablePLLSAI1(RCC_PLLSAI1InitTypeDef *PLLSAI1Init) +{ + uint32_t tickstart; + HAL_StatusTypeDef status = HAL_OK; + + /* check for PLLSAI1 Parameters used to output PLLSAI1CLK */ + assert_param(IS_RCC_PLLSAI1SOURCE(PLLSAI1Init->PLLSAI1Source)); + assert_param(IS_RCC_PLLSAI1M_VALUE(PLLSAI1Init->PLLSAI1M)); + assert_param(IS_RCC_PLLSAI1N_VALUE(PLLSAI1Init->PLLSAI1N)); + assert_param(IS_RCC_PLLSAI1P_VALUE(PLLSAI1Init->PLLSAI1P)); + assert_param(IS_RCC_PLLSAI1Q_VALUE(PLLSAI1Init->PLLSAI1Q)); + assert_param(IS_RCC_PLLSAI1R_VALUE(PLLSAI1Init->PLLSAI1R)); + assert_param(IS_RCC_PLLSAI1CLOCKOUT_VALUE(PLLSAI1Init->PLLSAI1ClockOut)); + + /* Disable the PLLSAI1 */ + __HAL_RCC_PLLSAI1_DISABLE(); + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till PLLSAI1 is ready to be updated */ + while(READ_BIT(RCC->CR, RCC_CR_PLLSAI1RDY) != 0U) + { + if((HAL_GetTick() - tickstart) > PLLSAI1_TIMEOUT_VALUE) + { + status = HAL_TIMEOUT; + break; + } + } + + if(status == HAL_OK) + { +#if defined(RCC_PLLSAI1M_DIV_1_16_SUPPORT) + /* Configure the PLLSAI1 Multiplication factor N */ + /* Configure the PLLSAI1 Division factors M, P, Q and R */ + __HAL_RCC_PLLSAI1_CONFIG(PLLSAI1Init->PLLSAI1M, PLLSAI1Init->PLLSAI1N, PLLSAI1Init->PLLSAI1P, PLLSAI1Init->PLLSAI1Q, PLLSAI1Init->PLLSAI1R); +#else + /* Configure the PLLSAI1 Multiplication factor N */ + /* Configure the PLLSAI1 Division factors P, Q and R */ + __HAL_RCC_PLLSAI1_CONFIG(PLLSAI1Init->PLLSAI1N, PLLSAI1Init->PLLSAI1P, PLLSAI1Init->PLLSAI1Q, PLLSAI1Init->PLLSAI1R); +#endif /* RCC_PLLSAI1M_DIV_1_16_SUPPORT */ + /* Configure the PLLSAI1 Clock output(s) */ + __HAL_RCC_PLLSAI1CLKOUT_ENABLE(PLLSAI1Init->PLLSAI1ClockOut); + + /* Enable the PLLSAI1 again by setting PLLSAI1ON to 1*/ + __HAL_RCC_PLLSAI1_ENABLE(); + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till PLLSAI1 is ready */ + while(READ_BIT(RCC->CR, RCC_CR_PLLSAI1RDY) == 0U) + { + if((HAL_GetTick() - tickstart) > PLLSAI1_TIMEOUT_VALUE) + { + status = HAL_TIMEOUT; + break; + } + } + } + + return status; +} + +/** + * @brief Disable PLLSAI1. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RCCEx_DisablePLLSAI1(void) +{ + uint32_t tickstart; + HAL_StatusTypeDef status = HAL_OK; + + /* Disable the PLLSAI1 */ + __HAL_RCC_PLLSAI1_DISABLE(); + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till PLLSAI1 is ready */ + while(READ_BIT(RCC->CR, RCC_CR_PLLSAI1RDY) != 0U) + { + if((HAL_GetTick() - tickstart) > PLLSAI1_TIMEOUT_VALUE) + { + status = HAL_TIMEOUT; + break; + } + } + + /* Disable the PLLSAI1 Clock outputs */ + __HAL_RCC_PLLSAI1CLKOUT_DISABLE(RCC_PLLSAI1CFGR_PLLSAI1PEN|RCC_PLLSAI1CFGR_PLLSAI1QEN|RCC_PLLSAI1CFGR_PLLSAI1REN); + + /* Reset PLL source to save power if no PLLs on */ +#if defined(RCC_PLLSAI2_SUPPORT) + if(READ_BIT(RCC->CR, (RCC_CR_PLLRDY | RCC_CR_PLLSAI2RDY)) == 0U) + { + MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC, RCC_PLLSOURCE_NONE); + } +#else + if(READ_BIT(RCC->CR, RCC_CR_PLLRDY) == 0U) + { + MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC, RCC_PLLSOURCE_NONE); + } +#endif /* RCC_PLLSAI2_SUPPORT */ + + return status; +} + +#endif /* RCC_PLLSAI1_SUPPORT */ + +#if defined(RCC_PLLSAI2_SUPPORT) + +/** + * @brief Enable PLLSAI2. + * @param PLLSAI2Init pointer to an RCC_PLLSAI2InitTypeDef structure that + * contains the configuration information for the PLLSAI2 + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RCCEx_EnablePLLSAI2(RCC_PLLSAI2InitTypeDef *PLLSAI2Init) +{ + uint32_t tickstart; + HAL_StatusTypeDef status = HAL_OK; + + /* check for PLLSAI2 Parameters used to output PLLSAI2CLK */ + assert_param(IS_RCC_PLLSAI2SOURCE(PLLSAI2Init->PLLSAI2Source)); + assert_param(IS_RCC_PLLSAI2M_VALUE(PLLSAI2Init->PLLSAI2M)); + assert_param(IS_RCC_PLLSAI2N_VALUE(PLLSAI2Init->PLLSAI2N)); + assert_param(IS_RCC_PLLSAI2P_VALUE(PLLSAI2Init->PLLSAI2P)); +#if defined(RCC_PLLSAI2Q_DIV_SUPPORT) + assert_param(IS_RCC_PLLSAI2Q_VALUE(PLLSAI2Init->PLLSAI2Q)); +#endif /* RCC_PLLSAI2Q_DIV_SUPPORT */ + assert_param(IS_RCC_PLLSAI2R_VALUE(PLLSAI2Init->PLLSAI2R)); + assert_param(IS_RCC_PLLSAI2CLOCKOUT_VALUE(PLLSAI2Init->PLLSAI2ClockOut)); + + /* Disable the PLLSAI2 */ + __HAL_RCC_PLLSAI2_DISABLE(); + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till PLLSAI2 is ready to be updated */ + while(READ_BIT(RCC->CR, RCC_CR_PLLSAI2RDY) != 0U) + { + if((HAL_GetTick() - tickstart) > PLLSAI2_TIMEOUT_VALUE) + { + status = HAL_TIMEOUT; + break; + } + } + + if(status == HAL_OK) + { +#if defined(RCC_PLLSAI2M_DIV_1_16_SUPPORT) && defined(RCC_PLLSAI2Q_DIV_SUPPORT) + /* Configure the PLLSAI2 Multiplication factor N */ + /* Configure the PLLSAI2 Division factors M, P, Q and R */ + __HAL_RCC_PLLSAI2_CONFIG(PLLSAI2Init->PLLSAI2M, PLLSAI2Init->PLLSAI2N, PLLSAI2Init->PLLSAI2P, PLLSAI2Init->PLLSAI2Q, PLLSAI2Init->PLLSAI2R); +#elif defined(RCC_PLLSAI2M_DIV_1_16_SUPPORT) + /* Configure the PLLSAI2 Multiplication factor N */ + /* Configure the PLLSAI2 Division factors M, P and R */ + __HAL_RCC_PLLSAI2_CONFIG(PLLSAI2Init->PLLSAI2M, PLLSAI2Init->PLLSAI2N, PLLSAI2Init->PLLSAI2P, PLLSAI2Init->PLLSAI2R); +#elif defined(RCC_PLLSAI2Q_DIV_SUPPORT) + /* Configure the PLLSAI2 Multiplication factor N */ + /* Configure the PLLSAI2 Division factors P, Q and R */ + __HAL_RCC_PLLSAI2_CONFIG(PLLSAI2Init->PLLSAI2N, PLLSAI2Init->PLLSAI2P, PLLSAI2Init->PLLSAI2Q, PLLSAI2Init->PLLSAI2R); +#else + /* Configure the PLLSAI2 Multiplication factor N */ + /* Configure the PLLSAI2 Division factors P and R */ + __HAL_RCC_PLLSAI2_CONFIG(PLLSAI2Init->PLLSAI2N, PLLSAI2Init->PLLSAI2P, PLLSAI2Init->PLLSAI2R); +#endif /* RCC_PLLSAI2M_DIV_1_16_SUPPORT && RCC_PLLSAI2Q_DIV_SUPPORT */ + /* Configure the PLLSAI2 Clock output(s) */ + __HAL_RCC_PLLSAI2CLKOUT_ENABLE(PLLSAI2Init->PLLSAI2ClockOut); + + /* Enable the PLLSAI2 again by setting PLLSAI2ON to 1*/ + __HAL_RCC_PLLSAI2_ENABLE(); + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till PLLSAI2 is ready */ + while(READ_BIT(RCC->CR, RCC_CR_PLLSAI2RDY) == 0U) + { + if((HAL_GetTick() - tickstart) > PLLSAI2_TIMEOUT_VALUE) + { + status = HAL_TIMEOUT; + break; + } + } + } + + return status; +} + +/** + * @brief Disable PLLISAI2. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RCCEx_DisablePLLSAI2(void) +{ + uint32_t tickstart; + HAL_StatusTypeDef status = HAL_OK; + + /* Disable the PLLSAI2 */ + __HAL_RCC_PLLSAI2_DISABLE(); + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till PLLSAI2 is ready */ + while(READ_BIT(RCC->CR, RCC_CR_PLLSAI2RDY) != 0U) + { + if((HAL_GetTick() - tickstart) > PLLSAI2_TIMEOUT_VALUE) + { + status = HAL_TIMEOUT; + break; + } + } + + /* Disable the PLLSAI2 Clock outputs */ +#if defined(RCC_PLLSAI2Q_DIV_SUPPORT) + __HAL_RCC_PLLSAI2CLKOUT_DISABLE(RCC_PLLSAI2CFGR_PLLSAI2PEN|RCC_PLLSAI2CFGR_PLLSAI2QEN|RCC_PLLSAI2CFGR_PLLSAI2REN); +#else + __HAL_RCC_PLLSAI2CLKOUT_DISABLE(RCC_PLLSAI2CFGR_PLLSAI2PEN|RCC_PLLSAI2CFGR_PLLSAI2REN); +#endif /* RCC_PLLSAI2M_DIV_1_16_SUPPORT && RCC_PLLSAI2Q_DIV_SUPPORT */ + + /* Reset PLL source to save power if no PLLs on */ + if(READ_BIT(RCC->CR, (RCC_CR_PLLRDY | RCC_CR_PLLSAI1RDY)) == 0U) + { + MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC, RCC_PLLSOURCE_NONE); + } + + return status; +} + +#endif /* RCC_PLLSAI2_SUPPORT */ + +/** + * @brief Configure the oscillator clock source for wakeup from Stop and CSS backup clock. + * @param WakeUpClk Wakeup clock + * This parameter can be one of the following values: + * @arg @ref RCC_STOP_WAKEUPCLOCK_MSI MSI oscillator selection + * @arg @ref RCC_STOP_WAKEUPCLOCK_HSI HSI oscillator selection + * @note This function shall not be called after the Clock Security System on HSE has been + * enabled. + * @retval None + */ +void HAL_RCCEx_WakeUpStopCLKConfig(uint32_t WakeUpClk) +{ + assert_param(IS_RCC_STOP_WAKEUPCLOCK(WakeUpClk)); + + __HAL_RCC_WAKEUPSTOP_CLK_CONFIG(WakeUpClk); +} + +/** + * @brief Configure the MSI range after standby mode. + * @note After Standby its frequency can be selected between 4 possible values (1, 2, 4 or 8 MHz). + * @param MSIRange MSI range + * This parameter can be one of the following values: + * @arg @ref RCC_MSIRANGE_4 Range 4 around 1 MHz + * @arg @ref RCC_MSIRANGE_5 Range 5 around 2 MHz + * @arg @ref RCC_MSIRANGE_6 Range 6 around 4 MHz (reset value) + * @arg @ref RCC_MSIRANGE_7 Range 7 around 8 MHz + * @retval None + */ +void HAL_RCCEx_StandbyMSIRangeConfig(uint32_t MSIRange) +{ + assert_param(IS_RCC_MSI_STANDBY_CLOCK_RANGE(MSIRange)); + + __HAL_RCC_MSI_STANDBY_RANGE_CONFIG(MSIRange); +} + +/** + * @brief Enable the LSE Clock Security System. + * @note Prior to enable the LSE Clock Security System, LSE oscillator is to be enabled + * with HAL_RCC_OscConfig() and the LSE oscillator clock is to be selected as RTC + * clock with HAL_RCCEx_PeriphCLKConfig(). + * @retval None + */ +void HAL_RCCEx_EnableLSECSS(void) +{ + SET_BIT(RCC->BDCR, RCC_BDCR_LSECSSON); +} + +/** + * @brief Disable the LSE Clock Security System. + * @note LSE Clock Security System can only be disabled after a LSE failure detection. + * @retval None + */ +void HAL_RCCEx_DisableLSECSS(void) +{ + CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSECSSON) ; + + /* Disable LSE CSS IT if any */ + __HAL_RCC_DISABLE_IT(RCC_IT_LSECSS); +} + +/** + * @brief Enable the LSE Clock Security System Interrupt & corresponding EXTI line. + * @note LSE Clock Security System Interrupt is mapped on RTC EXTI line 19 + * @retval None + */ +void HAL_RCCEx_EnableLSECSS_IT(void) +{ + /* Enable LSE CSS */ + SET_BIT(RCC->BDCR, RCC_BDCR_LSECSSON) ; + + /* Enable LSE CSS IT */ + __HAL_RCC_ENABLE_IT(RCC_IT_LSECSS); + + /* Enable IT on EXTI Line 19 */ + __HAL_RCC_LSECSS_EXTI_ENABLE_IT(); + __HAL_RCC_LSECSS_EXTI_ENABLE_RISING_EDGE(); +} + +/** + * @brief Handle the RCC LSE Clock Security System interrupt request. + * @retval None + */ +void HAL_RCCEx_LSECSS_IRQHandler(void) +{ + /* Check RCC LSE CSSF flag */ + if(__HAL_RCC_GET_IT(RCC_IT_LSECSS)) + { + /* RCC LSE Clock Security System interrupt user callback */ + HAL_RCCEx_LSECSS_Callback(); + + /* Clear RCC LSE CSS pending bit */ + __HAL_RCC_CLEAR_IT(RCC_IT_LSECSS); + } +} + +/** + * @brief RCCEx LSE Clock Security System interrupt callback. + * @retval none + */ +__weak void HAL_RCCEx_LSECSS_Callback(void) +{ + /* NOTE : This function should not be modified, when the callback is needed, + the @ref HAL_RCCEx_LSECSS_Callback should be implemented in the user file + */ +} + +/** + * @brief Select the Low Speed clock source to output on LSCO pin (PA2). + * @param LSCOSource specifies the Low Speed clock source to output. + * This parameter can be one of the following values: + * @arg @ref RCC_LSCOSOURCE_LSI LSI clock selected as LSCO source + * @arg @ref RCC_LSCOSOURCE_LSE LSE clock selected as LSCO source + * @retval None + */ +void HAL_RCCEx_EnableLSCO(uint32_t LSCOSource) +{ + GPIO_InitTypeDef GPIO_InitStruct; + FlagStatus pwrclkchanged = RESET; + FlagStatus backupchanged = RESET; + + /* Check the parameters */ + assert_param(IS_RCC_LSCOSOURCE(LSCOSource)); + + /* LSCO Pin Clock Enable */ + __LSCO_CLK_ENABLE(); + + /* Configure the LSCO pin in analog mode */ + GPIO_InitStruct.Pin = LSCO_PIN; + GPIO_InitStruct.Mode = GPIO_MODE_ANALOG; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; + GPIO_InitStruct.Pull = GPIO_NOPULL; + HAL_GPIO_Init(LSCO_GPIO_PORT, &GPIO_InitStruct); + + /* Update LSCOSEL clock source in Backup Domain control register */ + if(__HAL_RCC_PWR_IS_CLK_DISABLED()) + { + __HAL_RCC_PWR_CLK_ENABLE(); + pwrclkchanged = SET; + } + if(HAL_IS_BIT_CLR(PWR->CR1, PWR_CR1_DBP)) + { + HAL_PWR_EnableBkUpAccess(); + backupchanged = SET; + } + + MODIFY_REG(RCC->BDCR, RCC_BDCR_LSCOSEL | RCC_BDCR_LSCOEN, LSCOSource | RCC_BDCR_LSCOEN); + + if(backupchanged == SET) + { + HAL_PWR_DisableBkUpAccess(); + } + if(pwrclkchanged == SET) + { + __HAL_RCC_PWR_CLK_DISABLE(); + } +} + +/** + * @brief Disable the Low Speed clock output. + * @retval None + */ +void HAL_RCCEx_DisableLSCO(void) +{ + FlagStatus pwrclkchanged = RESET; + FlagStatus backupchanged = RESET; + + /* Update LSCOEN bit in Backup Domain control register */ + if(__HAL_RCC_PWR_IS_CLK_DISABLED()) + { + __HAL_RCC_PWR_CLK_ENABLE(); + pwrclkchanged = SET; + } + if(HAL_IS_BIT_CLR(PWR->CR1, PWR_CR1_DBP)) + { + /* Enable access to the backup domain */ + HAL_PWR_EnableBkUpAccess(); + backupchanged = SET; + } + + CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSCOEN); + + /* Restore previous configuration */ + if(backupchanged == SET) + { + /* Disable access to the backup domain */ + HAL_PWR_DisableBkUpAccess(); + } + if(pwrclkchanged == SET) + { + __HAL_RCC_PWR_CLK_DISABLE(); + } +} + +/** + * @brief Enable the PLL-mode of the MSI. + * @note Prior to enable the PLL-mode of the MSI for automatic hardware + * calibration LSE oscillator is to be enabled with HAL_RCC_OscConfig(). + * @retval None + */ +void HAL_RCCEx_EnableMSIPLLMode(void) +{ + SET_BIT(RCC->CR, RCC_CR_MSIPLLEN) ; +} + +/** + * @brief Disable the PLL-mode of the MSI. + * @note PLL-mode of the MSI is automatically reset when LSE oscillator is disabled. + * @retval None + */ +void HAL_RCCEx_DisableMSIPLLMode(void) +{ + CLEAR_BIT(RCC->CR, RCC_CR_MSIPLLEN) ; +} + +#if defined (OCTOSPI1) && defined (OCTOSPI2) +/** + * @brief Configure OCTOSPI instances DQS delays. + * @param Delay1 OCTOSPI1 DQS delay + * @param Delay2 OCTOSPI2 DQS delay + * @note Delay parameters stand for unitary delays from 0 to 15. Actual delay is Delay1 or Delay2 + 1. + * @retval None + */ +void HAL_RCCEx_OCTOSPIDelayConfig(uint32_t Delay1, uint32_t Delay2) +{ + assert_param(IS_RCC_OCTOSPIDELAY(Delay1)); + assert_param(IS_RCC_OCTOSPIDELAY(Delay2)); + + MODIFY_REG(RCC->DLYCFGR, RCC_DLYCFGR_OCTOSPI1_DLY|RCC_DLYCFGR_OCTOSPI2_DLY, (Delay1 | (Delay2 << RCC_DLYCFGR_OCTOSPI2_DLY_Pos))) ; +} +#endif /* OCTOSPI1 && OCTOSPI2 */ + +/** + * @} + */ + +#if defined(CRS) + +/** @defgroup RCCEx_Exported_Functions_Group3 Extended Clock Recovery System Control functions + * @brief Extended Clock Recovery System Control functions + * +@verbatim + =============================================================================== + ##### Extended Clock Recovery System Control functions ##### + =============================================================================== + [..] + For devices with Clock Recovery System feature (CRS), RCC Extension HAL driver can be used as follows: + + (#) In System clock config, HSI48 needs to be enabled + + (#) Enable CRS clock in IP MSP init which will use CRS functions + + (#) Call CRS functions as follows: + (##) Prepare synchronization configuration necessary for HSI48 calibration + (+++) Default values can be set for frequency Error Measurement (reload and error limit) + and also HSI48 oscillator smooth trimming. + (+++) Macro __HAL_RCC_CRS_RELOADVALUE_CALCULATE can be also used to calculate + directly reload value with target and synchronization frequencies values + (##) Call function HAL_RCCEx_CRSConfig which + (+++) Resets CRS registers to their default values. + (+++) Configures CRS registers with synchronization configuration + (+++) Enables automatic calibration and frequency error counter feature + Note: When using USB LPM (Link Power Management) and the device is in Sleep mode, the + periodic USB SOF will not be generated by the host. No SYNC signal will therefore be + provided to the CRS to calibrate the HSI48 on the run. To guarantee the required clock + precision after waking up from Sleep mode, the LSE or reference clock on the GPIOs + should be used as SYNC signal. + + (##) A polling function is provided to wait for complete synchronization + (+++) Call function HAL_RCCEx_CRSWaitSynchronization() + (+++) According to CRS status, user can decide to adjust again the calibration or continue + application if synchronization is OK + + (#) User can retrieve information related to synchronization in calling function + HAL_RCCEx_CRSGetSynchronizationInfo() + + (#) Regarding synchronization status and synchronization information, user can try a new calibration + in changing synchronization configuration and call again HAL_RCCEx_CRSConfig. + Note: When the SYNC event is detected during the downcounting phase (before reaching the zero value), + it means that the actual frequency is lower than the target (and so, that the TRIM value should be + incremented), while when it is detected during the upcounting phase it means that the actual frequency + is higher (and that the TRIM value should be decremented). + + (#) In interrupt mode, user can resort to the available macros (__HAL_RCC_CRS_XXX_IT). Interrupts will go + through CRS Handler (CRS_IRQn/CRS_IRQHandler) + (++) Call function HAL_RCCEx_CRSConfig() + (++) Enable CRS_IRQn (thanks to NVIC functions) + (++) Enable CRS interrupt (__HAL_RCC_CRS_ENABLE_IT) + (++) Implement CRS status management in the following user callbacks called from + HAL_RCCEx_CRS_IRQHandler(): + (+++) HAL_RCCEx_CRS_SyncOkCallback() + (+++) HAL_RCCEx_CRS_SyncWarnCallback() + (+++) HAL_RCCEx_CRS_ExpectedSyncCallback() + (+++) HAL_RCCEx_CRS_ErrorCallback() + + (#) To force a SYNC EVENT, user can use the function HAL_RCCEx_CRSSoftwareSynchronizationGenerate(). + This function can be called before calling HAL_RCCEx_CRSConfig (for instance in Systick handler) + +@endverbatim + * @{ + */ + +/** + * @brief Start automatic synchronization for polling mode + * @param pInit Pointer on RCC_CRSInitTypeDef structure + * @retval None + */ +void HAL_RCCEx_CRSConfig(RCC_CRSInitTypeDef *pInit) +{ + uint32_t value; /* no init needed */ + + /* Check the parameters */ + assert_param(IS_RCC_CRS_SYNC_DIV(pInit->Prescaler)); + assert_param(IS_RCC_CRS_SYNC_SOURCE(pInit->Source)); + assert_param(IS_RCC_CRS_SYNC_POLARITY(pInit->Polarity)); + assert_param(IS_RCC_CRS_RELOADVALUE(pInit->ReloadValue)); + assert_param(IS_RCC_CRS_ERRORLIMIT(pInit->ErrorLimitValue)); + assert_param(IS_RCC_CRS_HSI48CALIBRATION(pInit->HSI48CalibrationValue)); + + /* CONFIGURATION */ + + /* Before configuration, reset CRS registers to their default values*/ + __HAL_RCC_CRS_FORCE_RESET(); + __HAL_RCC_CRS_RELEASE_RESET(); + + /* Set the SYNCDIV[2:0] bits according to Prescaler value */ + /* Set the SYNCSRC[1:0] bits according to Source value */ + /* Set the SYNCSPOL bit according to Polarity value */ + value = (pInit->Prescaler | pInit->Source | pInit->Polarity); + /* Set the RELOAD[15:0] bits according to ReloadValue value */ + value |= pInit->ReloadValue; + /* Set the FELIM[7:0] bits according to ErrorLimitValue value */ + value |= (pInit->ErrorLimitValue << CRS_CFGR_FELIM_Pos); + WRITE_REG(CRS->CFGR, value); + + /* Adjust HSI48 oscillator smooth trimming */ + /* Set the TRIM[6:0] bits for STM32L412xx/L422xx or TRIM[5:0] bits otherwise + according to RCC_CRS_HSI48CalibrationValue value */ + MODIFY_REG(CRS->CR, CRS_CR_TRIM, (pInit->HSI48CalibrationValue << CRS_CR_TRIM_Pos)); + + /* START AUTOMATIC SYNCHRONIZATION*/ + + /* Enable Automatic trimming & Frequency error counter */ + SET_BIT(CRS->CR, CRS_CR_AUTOTRIMEN | CRS_CR_CEN); +} + +/** + * @brief Generate the software synchronization event + * @retval None + */ +void HAL_RCCEx_CRSSoftwareSynchronizationGenerate(void) +{ + SET_BIT(CRS->CR, CRS_CR_SWSYNC); +} + +/** + * @brief Return synchronization info + * @param pSynchroInfo Pointer on RCC_CRSSynchroInfoTypeDef structure + * @retval None + */ +void HAL_RCCEx_CRSGetSynchronizationInfo(RCC_CRSSynchroInfoTypeDef *pSynchroInfo) +{ + /* Check the parameter */ + assert_param(pSynchroInfo != (void *)NULL); + + /* Get the reload value */ + pSynchroInfo->ReloadValue = (READ_BIT(CRS->CFGR, CRS_CFGR_RELOAD)); + + /* Get HSI48 oscillator smooth trimming */ + pSynchroInfo->HSI48CalibrationValue = (READ_BIT(CRS->CR, CRS_CR_TRIM) >> CRS_CR_TRIM_Pos); + + /* Get Frequency error capture */ + pSynchroInfo->FreqErrorCapture = (READ_BIT(CRS->ISR, CRS_ISR_FECAP) >> CRS_ISR_FECAP_Pos); + + /* Get Frequency error direction */ + pSynchroInfo->FreqErrorDirection = (READ_BIT(CRS->ISR, CRS_ISR_FEDIR)); +} + +/** +* @brief Wait for CRS Synchronization status. +* @param Timeout Duration of the timeout +* @note Timeout is based on the maximum time to receive a SYNC event based on synchronization +* frequency. +* @note If Timeout set to HAL_MAX_DELAY, HAL_TIMEOUT will be never returned. +* @retval Combination of Synchronization status +* This parameter can be a combination of the following values: +* @arg @ref RCC_CRS_TIMEOUT +* @arg @ref RCC_CRS_SYNCOK +* @arg @ref RCC_CRS_SYNCWARN +* @arg @ref RCC_CRS_SYNCERR +* @arg @ref RCC_CRS_SYNCMISS +* @arg @ref RCC_CRS_TRIMOVF +*/ +uint32_t HAL_RCCEx_CRSWaitSynchronization(uint32_t Timeout) +{ + uint32_t crsstatus = RCC_CRS_NONE; + uint32_t tickstart; + + /* Get timeout */ + tickstart = HAL_GetTick(); + + /* Wait for CRS flag or timeout detection */ + do + { + if(Timeout != HAL_MAX_DELAY) + { + if(((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U)) + { + crsstatus = RCC_CRS_TIMEOUT; + } + } + /* Check CRS SYNCOK flag */ + if(__HAL_RCC_CRS_GET_FLAG(RCC_CRS_FLAG_SYNCOK)) + { + /* CRS SYNC event OK */ + crsstatus |= RCC_CRS_SYNCOK; + + /* Clear CRS SYNC event OK bit */ + __HAL_RCC_CRS_CLEAR_FLAG(RCC_CRS_FLAG_SYNCOK); + } + + /* Check CRS SYNCWARN flag */ + if(__HAL_RCC_CRS_GET_FLAG(RCC_CRS_FLAG_SYNCWARN)) + { + /* CRS SYNC warning */ + crsstatus |= RCC_CRS_SYNCWARN; + + /* Clear CRS SYNCWARN bit */ + __HAL_RCC_CRS_CLEAR_FLAG(RCC_CRS_FLAG_SYNCWARN); + } + + /* Check CRS TRIM overflow flag */ + if(__HAL_RCC_CRS_GET_FLAG(RCC_CRS_FLAG_TRIMOVF)) + { + /* CRS SYNC Error */ + crsstatus |= RCC_CRS_TRIMOVF; + + /* Clear CRS Error bit */ + __HAL_RCC_CRS_CLEAR_FLAG(RCC_CRS_FLAG_TRIMOVF); + } + + /* Check CRS Error flag */ + if(__HAL_RCC_CRS_GET_FLAG(RCC_CRS_FLAG_SYNCERR)) + { + /* CRS SYNC Error */ + crsstatus |= RCC_CRS_SYNCERR; + + /* Clear CRS Error bit */ + __HAL_RCC_CRS_CLEAR_FLAG(RCC_CRS_FLAG_SYNCERR); + } + + /* Check CRS SYNC Missed flag */ + if(__HAL_RCC_CRS_GET_FLAG(RCC_CRS_FLAG_SYNCMISS)) + { + /* CRS SYNC Missed */ + crsstatus |= RCC_CRS_SYNCMISS; + + /* Clear CRS SYNC Missed bit */ + __HAL_RCC_CRS_CLEAR_FLAG(RCC_CRS_FLAG_SYNCMISS); + } + + /* Check CRS Expected SYNC flag */ + if(__HAL_RCC_CRS_GET_FLAG(RCC_CRS_FLAG_ESYNC)) + { + /* frequency error counter reached a zero value */ + __HAL_RCC_CRS_CLEAR_FLAG(RCC_CRS_FLAG_ESYNC); + } + } while(RCC_CRS_NONE == crsstatus); + + return crsstatus; +} + +/** + * @brief Handle the Clock Recovery System interrupt request. + * @retval None + */ +void HAL_RCCEx_CRS_IRQHandler(void) +{ + uint32_t crserror = RCC_CRS_NONE; + /* Get current IT flags and IT sources values */ + uint32_t itflags = READ_REG(CRS->ISR); + uint32_t itsources = READ_REG(CRS->CR); + + /* Check CRS SYNCOK flag */ + if(((itflags & RCC_CRS_FLAG_SYNCOK) != 0U) && ((itsources & RCC_CRS_IT_SYNCOK) != 0U)) + { + /* Clear CRS SYNC event OK flag */ + WRITE_REG(CRS->ICR, CRS_ICR_SYNCOKC); + + /* user callback */ + HAL_RCCEx_CRS_SyncOkCallback(); + } + /* Check CRS SYNCWARN flag */ + else if(((itflags & RCC_CRS_FLAG_SYNCWARN) != 0U) && ((itsources & RCC_CRS_IT_SYNCWARN) != 0U)) + { + /* Clear CRS SYNCWARN flag */ + WRITE_REG(CRS->ICR, CRS_ICR_SYNCWARNC); + + /* user callback */ + HAL_RCCEx_CRS_SyncWarnCallback(); + } + /* Check CRS Expected SYNC flag */ + else if(((itflags & RCC_CRS_FLAG_ESYNC) != 0U) && ((itsources & RCC_CRS_IT_ESYNC) != 0U)) + { + /* frequency error counter reached a zero value */ + WRITE_REG(CRS->ICR, CRS_ICR_ESYNCC); + + /* user callback */ + HAL_RCCEx_CRS_ExpectedSyncCallback(); + } + /* Check CRS Error flags */ + else + { + if(((itflags & RCC_CRS_FLAG_ERR) != 0U) && ((itsources & RCC_CRS_IT_ERR) != 0U)) + { + if((itflags & RCC_CRS_FLAG_SYNCERR) != 0U) + { + crserror |= RCC_CRS_SYNCERR; + } + if((itflags & RCC_CRS_FLAG_SYNCMISS) != 0U) + { + crserror |= RCC_CRS_SYNCMISS; + } + if((itflags & RCC_CRS_FLAG_TRIMOVF) != 0U) + { + crserror |= RCC_CRS_TRIMOVF; + } + + /* Clear CRS Error flags */ + WRITE_REG(CRS->ICR, CRS_ICR_ERRC); + + /* user error callback */ + HAL_RCCEx_CRS_ErrorCallback(crserror); + } + } +} + +/** + * @brief RCCEx Clock Recovery System SYNCOK interrupt callback. + * @retval none + */ +__weak void HAL_RCCEx_CRS_SyncOkCallback(void) +{ + /* NOTE : This function should not be modified, when the callback is needed, + the @ref HAL_RCCEx_CRS_SyncOkCallback should be implemented in the user file + */ +} + +/** + * @brief RCCEx Clock Recovery System SYNCWARN interrupt callback. + * @retval none + */ +__weak void HAL_RCCEx_CRS_SyncWarnCallback(void) +{ + /* NOTE : This function should not be modified, when the callback is needed, + the @ref HAL_RCCEx_CRS_SyncWarnCallback should be implemented in the user file + */ +} + +/** + * @brief RCCEx Clock Recovery System Expected SYNC interrupt callback. + * @retval none + */ +__weak void HAL_RCCEx_CRS_ExpectedSyncCallback(void) +{ + /* NOTE : This function should not be modified, when the callback is needed, + the @ref HAL_RCCEx_CRS_ExpectedSyncCallback should be implemented in the user file + */ +} + +/** + * @brief RCCEx Clock Recovery System Error interrupt callback. + * @param Error Combination of Error status. + * This parameter can be a combination of the following values: + * @arg @ref RCC_CRS_SYNCERR + * @arg @ref RCC_CRS_SYNCMISS + * @arg @ref RCC_CRS_TRIMOVF + * @retval none + */ +__weak void HAL_RCCEx_CRS_ErrorCallback(uint32_t Error) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(Error); + + /* NOTE : This function should not be modified, when the callback is needed, + the @ref HAL_RCCEx_CRS_ErrorCallback should be implemented in the user file + */ +} + +/** + * @} + */ + +#endif /* CRS */ + +/** + * @} + */ + +/** @addtogroup RCCEx_Private_Functions + * @{ + */ + +#if defined(RCC_PLLSAI1_SUPPORT) + +/** + * @brief Configure the parameters N & P & optionally M of PLLSAI1 and enable PLLSAI1 output clock(s). + * @param PllSai1 pointer to an RCC_PLLSAI1InitTypeDef structure that + * contains the configuration parameters N & P & optionally M as well as PLLSAI1 output clock(s) + * @param Divider divider parameter to be updated + * + * @note PLLSAI1 is temporary disable to apply new parameters + * + * @retval HAL status + */ +static HAL_StatusTypeDef RCCEx_PLLSAI1_Config(RCC_PLLSAI1InitTypeDef *PllSai1, uint32_t Divider) +{ + uint32_t tickstart; + HAL_StatusTypeDef status = HAL_OK; + + /* check for PLLSAI1 Parameters used to output PLLSAI1CLK */ + /* P, Q and R dividers are verified in each specific divider case below */ + assert_param(IS_RCC_PLLSAI1SOURCE(PllSai1->PLLSAI1Source)); + assert_param(IS_RCC_PLLSAI1M_VALUE(PllSai1->PLLSAI1M)); + assert_param(IS_RCC_PLLSAI1N_VALUE(PllSai1->PLLSAI1N)); + assert_param(IS_RCC_PLLSAI1CLOCKOUT_VALUE(PllSai1->PLLSAI1ClockOut)); + + /* Check that PLLSAI1 clock source and divider M can be applied */ + if(__HAL_RCC_GET_PLL_OSCSOURCE() != RCC_PLLSOURCE_NONE) + { + /* PLL clock source and divider M already set, check that no request for change */ + if((__HAL_RCC_GET_PLL_OSCSOURCE() != PllSai1->PLLSAI1Source) + || + (PllSai1->PLLSAI1Source == RCC_PLLSOURCE_NONE) +#if !defined(RCC_PLLSAI1M_DIV_1_16_SUPPORT) + || + (((READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLM) >> RCC_PLLCFGR_PLLM_Pos) + 1U) != PllSai1->PLLSAI1M) +#endif + ) + { + status = HAL_ERROR; + } + } + else + { + /* Check PLLSAI1 clock source availability */ + switch(PllSai1->PLLSAI1Source) + { + case RCC_PLLSOURCE_MSI: + if(HAL_IS_BIT_CLR(RCC->CR, RCC_CR_MSIRDY)) + { + status = HAL_ERROR; + } + break; + case RCC_PLLSOURCE_HSI: + if(HAL_IS_BIT_CLR(RCC->CR, RCC_CR_HSIRDY)) + { + status = HAL_ERROR; + } + break; + case RCC_PLLSOURCE_HSE: + if(HAL_IS_BIT_CLR(RCC->CR, RCC_CR_HSERDY)) + { + if(HAL_IS_BIT_CLR(RCC->CR, RCC_CR_HSEBYP)) + { + status = HAL_ERROR; + } + } + break; + default: + status = HAL_ERROR; + break; + } + + if(status == HAL_OK) + { +#if defined(RCC_PLLSAI1M_DIV_1_16_SUPPORT) + /* Set PLLSAI1 clock source */ + MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC, PllSai1->PLLSAI1Source); +#else + /* Set PLLSAI1 clock source and divider M */ + MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC | RCC_PLLCFGR_PLLM, PllSai1->PLLSAI1Source | (PllSai1->PLLSAI1M - 1U) << RCC_PLLCFGR_PLLM_Pos); +#endif + } + } + + if(status == HAL_OK) + { + /* Disable the PLLSAI1 */ + __HAL_RCC_PLLSAI1_DISABLE(); + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till PLLSAI1 is ready to be updated */ + while(READ_BIT(RCC->CR, RCC_CR_PLLSAI1RDY) != 0U) + { + if((HAL_GetTick() - tickstart) > PLLSAI1_TIMEOUT_VALUE) + { + status = HAL_TIMEOUT; + break; + } + } + + if(status == HAL_OK) + { + if(Divider == DIVIDER_P_UPDATE) + { + assert_param(IS_RCC_PLLSAI1P_VALUE(PllSai1->PLLSAI1P)); +#if defined(RCC_PLLSAI1M_DIV_1_16_SUPPORT) + + /* Configure the PLLSAI1 Division factor M, P and Multiplication factor N*/ +#if defined(RCC_PLLSAI1P_DIV_2_31_SUPPORT) + MODIFY_REG(RCC->PLLSAI1CFGR, + RCC_PLLSAI1CFGR_PLLSAI1N | RCC_PLLSAI1CFGR_PLLSAI1PDIV | RCC_PLLSAI1CFGR_PLLSAI1M, + (PllSai1->PLLSAI1N << RCC_PLLSAI1CFGR_PLLSAI1N_Pos) | + (PllSai1->PLLSAI1P << RCC_PLLSAI1CFGR_PLLSAI1PDIV_Pos) | + ((PllSai1->PLLSAI1M - 1U) << RCC_PLLSAI1CFGR_PLLSAI1M_Pos)); +#else + MODIFY_REG(RCC->PLLSAI1CFGR, + RCC_PLLSAI1CFGR_PLLSAI1N | RCC_PLLSAI1CFGR_PLLSAI1P | RCC_PLLSAI1CFGR_PLLSAI1M, + (PllSai1->PLLSAI1N << RCC_PLLSAI1CFGR_PLLSAI1N_Pos) | + ((PllSai1->PLLSAI1P >> 4U) << RCC_PLLSAI1CFGR_PLLSAI1P_Pos) | + ((PllSai1->PLLSAI1M - 1U) << RCC_PLLSAI1CFGR_PLLSAI1M_Pos)); +#endif /* RCC_PLLSAI1P_DIV_2_31_SUPPORT */ + +#else + /* Configure the PLLSAI1 Division factor P and Multiplication factor N*/ +#if defined(RCC_PLLSAI1P_DIV_2_31_SUPPORT) + MODIFY_REG(RCC->PLLSAI1CFGR, + RCC_PLLSAI1CFGR_PLLSAI1N | RCC_PLLSAI1CFGR_PLLSAI1PDIV, + (PllSai1->PLLSAI1N << RCC_PLLSAI1CFGR_PLLSAI1N_Pos) | + (PllSai1->PLLSAI1P << RCC_PLLSAI1CFGR_PLLSAI1PDIV_Pos)); +#else + MODIFY_REG(RCC->PLLSAI1CFGR, + RCC_PLLSAI1CFGR_PLLSAI1N | RCC_PLLSAI1CFGR_PLLSAI1P, + (PllSai1->PLLSAI1N << RCC_PLLSAI1CFGR_PLLSAI1N_Pos) | + ((PllSai1->PLLSAI1P >> 4U) << RCC_PLLSAI1CFGR_PLLSAI1P_Pos)); +#endif /* RCC_PLLSAI1P_DIV_2_31_SUPPORT */ + +#endif /* RCC_PLLSAI1M_DIV_1_16_SUPPORT */ + } + else if(Divider == DIVIDER_Q_UPDATE) + { + assert_param(IS_RCC_PLLSAI1Q_VALUE(PllSai1->PLLSAI1Q)); +#if defined(RCC_PLLSAI1M_DIV_1_16_SUPPORT) + /* Configure the PLLSAI1 Division factor M, Q and Multiplication factor N*/ + MODIFY_REG(RCC->PLLSAI1CFGR, + RCC_PLLSAI1CFGR_PLLSAI1N | RCC_PLLSAI1CFGR_PLLSAI1Q | RCC_PLLSAI1CFGR_PLLSAI1M, + (PllSai1->PLLSAI1N << RCC_PLLSAI1CFGR_PLLSAI1N_Pos) | + (((PllSai1->PLLSAI1Q >> 1U) - 1U) << RCC_PLLSAI1CFGR_PLLSAI1Q_Pos) | + ((PllSai1->PLLSAI1M - 1U) << RCC_PLLSAI1CFGR_PLLSAI1M_Pos)); +#else + /* Configure the PLLSAI1 Division factor Q and Multiplication factor N*/ + MODIFY_REG(RCC->PLLSAI1CFGR, + RCC_PLLSAI1CFGR_PLLSAI1N | RCC_PLLSAI1CFGR_PLLSAI1Q, + (PllSai1->PLLSAI1N << RCC_PLLSAI1CFGR_PLLSAI1N_Pos) | + (((PllSai1->PLLSAI1Q >> 1U) - 1U) << RCC_PLLSAI1CFGR_PLLSAI1Q_Pos)); +#endif /* RCC_PLLSAI1M_DIV_1_16_SUPPORT */ + } + else + { + assert_param(IS_RCC_PLLSAI1R_VALUE(PllSai1->PLLSAI1R)); +#if defined(RCC_PLLSAI1M_DIV_1_16_SUPPORT) + /* Configure the PLLSAI1 Division factor M, R and Multiplication factor N*/ + MODIFY_REG(RCC->PLLSAI1CFGR, + RCC_PLLSAI1CFGR_PLLSAI1N | RCC_PLLSAI1CFGR_PLLSAI1R | RCC_PLLSAI1CFGR_PLLSAI1M, + (PllSai1->PLLSAI1N << RCC_PLLSAI1CFGR_PLLSAI1N_Pos) | + (((PllSai1->PLLSAI1R >> 1U) - 1U) << RCC_PLLSAI1CFGR_PLLSAI1R_Pos) | + ((PllSai1->PLLSAI1M - 1U) << RCC_PLLSAI1CFGR_PLLSAI1M_Pos)); +#else + /* Configure the PLLSAI1 Division factor R and Multiplication factor N*/ + MODIFY_REG(RCC->PLLSAI1CFGR, + RCC_PLLSAI1CFGR_PLLSAI1N | RCC_PLLSAI1CFGR_PLLSAI1R, + (PllSai1->PLLSAI1N << RCC_PLLSAI1CFGR_PLLSAI1N_Pos) | + (((PllSai1->PLLSAI1R >> 1U) - 1U) << RCC_PLLSAI1CFGR_PLLSAI1R_Pos)); +#endif /* RCC_PLLSAI1M_DIV_1_16_SUPPORT */ + } + + /* Enable the PLLSAI1 again by setting PLLSAI1ON to 1*/ + __HAL_RCC_PLLSAI1_ENABLE(); + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till PLLSAI1 is ready */ + while(READ_BIT(RCC->CR, RCC_CR_PLLSAI1RDY) == 0U) + { + if((HAL_GetTick() - tickstart) > PLLSAI1_TIMEOUT_VALUE) + { + status = HAL_TIMEOUT; + break; + } + } + + if(status == HAL_OK) + { + /* Configure the PLLSAI1 Clock output(s) */ + __HAL_RCC_PLLSAI1CLKOUT_ENABLE(PllSai1->PLLSAI1ClockOut); + } + } + } + + return status; +} + +#endif /* RCC_PLLSAI1_SUPPORT */ + +#if defined(RCC_PLLSAI2_SUPPORT) + +/** + * @brief Configure the parameters N & P & optionally M of PLLSAI2 and enable PLLSAI2 output clock(s). + * @param PllSai2 pointer to an RCC_PLLSAI2InitTypeDef structure that + * contains the configuration parameters N & P & optionally M as well as PLLSAI2 output clock(s) + * @param Divider divider parameter to be updated + * + * @note PLLSAI2 is temporary disable to apply new parameters + * + * @retval HAL status + */ +static HAL_StatusTypeDef RCCEx_PLLSAI2_Config(RCC_PLLSAI2InitTypeDef *PllSai2, uint32_t Divider) +{ + uint32_t tickstart; + HAL_StatusTypeDef status = HAL_OK; + + /* check for PLLSAI2 Parameters used to output PLLSAI2CLK */ + /* P, Q and R dividers are verified in each specific divider case below */ + assert_param(IS_RCC_PLLSAI2SOURCE(PllSai2->PLLSAI2Source)); + assert_param(IS_RCC_PLLSAI2M_VALUE(PllSai2->PLLSAI2M)); + assert_param(IS_RCC_PLLSAI2N_VALUE(PllSai2->PLLSAI2N)); + assert_param(IS_RCC_PLLSAI2CLOCKOUT_VALUE(PllSai2->PLLSAI2ClockOut)); + + /* Check that PLLSAI2 clock source and divider M can be applied */ + if(__HAL_RCC_GET_PLL_OSCSOURCE() != RCC_PLLSOURCE_NONE) + { + /* PLL clock source and divider M already set, check that no request for change */ + if((__HAL_RCC_GET_PLL_OSCSOURCE() != PllSai2->PLLSAI2Source) + || + (PllSai2->PLLSAI2Source == RCC_PLLSOURCE_NONE) +#if !defined(RCC_PLLSAI2M_DIV_1_16_SUPPORT) + || + (((READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLM) >> RCC_PLLCFGR_PLLM_Pos) + 1U) != PllSai2->PLLSAI2M) +#endif + ) + { + status = HAL_ERROR; + } + } + else + { + /* Check PLLSAI2 clock source availability */ + switch(PllSai2->PLLSAI2Source) + { + case RCC_PLLSOURCE_MSI: + if(HAL_IS_BIT_CLR(RCC->CR, RCC_CR_MSIRDY)) + { + status = HAL_ERROR; + } + break; + case RCC_PLLSOURCE_HSI: + if(HAL_IS_BIT_CLR(RCC->CR, RCC_CR_HSIRDY)) + { + status = HAL_ERROR; + } + break; + case RCC_PLLSOURCE_HSE: + if(HAL_IS_BIT_CLR(RCC->CR, RCC_CR_HSERDY)) + { + if(HAL_IS_BIT_CLR(RCC->CR, RCC_CR_HSEBYP)) + { + status = HAL_ERROR; + } + } + break; + default: + status = HAL_ERROR; + break; + } + + if(status == HAL_OK) + { +#if defined(RCC_PLLSAI2M_DIV_1_16_SUPPORT) + /* Set PLLSAI2 clock source */ + MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC, PllSai2->PLLSAI2Source); +#else + /* Set PLLSAI2 clock source and divider M */ + MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC | RCC_PLLCFGR_PLLM, PllSai2->PLLSAI2Source | (PllSai2->PLLSAI2M - 1U) << RCC_PLLCFGR_PLLM_Pos); +#endif + } + } + + if(status == HAL_OK) + { + /* Disable the PLLSAI2 */ + __HAL_RCC_PLLSAI2_DISABLE(); + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till PLLSAI2 is ready to be updated */ + while(READ_BIT(RCC->CR, RCC_CR_PLLSAI2RDY) != 0U) + { + if((HAL_GetTick() - tickstart) > PLLSAI2_TIMEOUT_VALUE) + { + status = HAL_TIMEOUT; + break; + } + } + + if(status == HAL_OK) + { + if(Divider == DIVIDER_P_UPDATE) + { + assert_param(IS_RCC_PLLSAI2P_VALUE(PllSai2->PLLSAI2P)); +#if defined(RCC_PLLSAI2M_DIV_1_16_SUPPORT) + + /* Configure the PLLSAI2 Division factor M, P and Multiplication factor N*/ +#if defined(RCC_PLLSAI2P_DIV_2_31_SUPPORT) + MODIFY_REG(RCC->PLLSAI2CFGR, + RCC_PLLSAI2CFGR_PLLSAI2N | RCC_PLLSAI2CFGR_PLLSAI2PDIV | RCC_PLLSAI2CFGR_PLLSAI2M, + (PllSai2->PLLSAI2N << RCC_PLLSAI2CFGR_PLLSAI2N_Pos) | + (PllSai2->PLLSAI2P << RCC_PLLSAI2CFGR_PLLSAI2PDIV_Pos) | + ((PllSai2->PLLSAI2M - 1U) << RCC_PLLSAI2CFGR_PLLSAI2M_Pos)); +#else + MODIFY_REG(RCC->PLLSAI2CFGR, + RCC_PLLSAI2CFGR_PLLSAI2N | RCC_PLLSAI2CFGR_PLLSAI2P | RCC_PLLSAI2CFGR_PLLSAI2M, + (PllSai2->PLLSAI2N << RCC_PLLSAI2CFGR_PLLSAI2N_Pos) | + ((PllSai2->PLLSAI2P >> 4U) << RCC_PLLSAI2CFGR_PLLSAI2P_Pos) | + ((PllSai2->PLLSAI2M - 1U) << RCC_PLLSAI2CFGR_PLLSAI2M_Pos)); +#endif /* RCC_PLLSAI2P_DIV_2_31_SUPPORT */ + +#else + /* Configure the PLLSAI2 Division factor P and Multiplication factor N*/ +#if defined(RCC_PLLSAI2P_DIV_2_31_SUPPORT) + MODIFY_REG(RCC->PLLSAI2CFGR, + RCC_PLLSAI2CFGR_PLLSAI2N | RCC_PLLSAI2CFGR_PLLSAI2PDIV, + (PllSai2->PLLSAI2N << RCC_PLLSAI2CFGR_PLLSAI2N_Pos) | + (PllSai2->PLLSAI2P << RCC_PLLSAI2CFGR_PLLSAI2PDIV_Pos)); +#else + MODIFY_REG(RCC->PLLSAI2CFGR, + RCC_PLLSAI2CFGR_PLLSAI2N | RCC_PLLSAI2CFGR_PLLSAI2P, + (PllSai2->PLLSAI2N << RCC_PLLSAI2CFGR_PLLSAI2N_Pos) | + ((PllSai2->PLLSAI2P >> 4U) << RCC_PLLSAI2CFGR_PLLSAI2P_Pos)); +#endif /* RCC_PLLSAI2P_DIV_2_31_SUPPORT */ + +#endif /* RCC_PLLSAI2M_DIV_1_16_SUPPORT */ + } +#if defined(RCC_PLLSAI2Q_DIV_SUPPORT) + else if(Divider == DIVIDER_Q_UPDATE) + { + assert_param(IS_RCC_PLLSAI2Q_VALUE(PllSai2->PLLSAI2Q)); +#if defined(RCC_PLLSAI2M_DIV_1_16_SUPPORT) + /* Configure the PLLSAI2 Division factor M, Q and Multiplication factor N*/ + MODIFY_REG(RCC->PLLSAI2CFGR, + RCC_PLLSAI2CFGR_PLLSAI2N | RCC_PLLSAI2CFGR_PLLSAI2Q | RCC_PLLSAI2CFGR_PLLSAI2M, + (PllSai2->PLLSAI2N << RCC_PLLSAI2CFGR_PLLSAI2N_Pos) | + (((PllSai2->PLLSAI2Q >> 1U) - 1U) << RCC_PLLSAI2CFGR_PLLSAI2Q_Pos) | + ((PllSai2->PLLSAI2M - 1U) << RCC_PLLSAI2CFGR_PLLSAI2M_Pos)); +#else + /* Configure the PLLSAI2 Division factor Q and Multiplication factor N*/ + MODIFY_REG(RCC->PLLSAI2CFGR, + RCC_PLLSAI2CFGR_PLLSAI2N | RCC_PLLSAI2CFGR_PLLSAI2Q, + (PllSai2->PLLSAI2N << RCC_PLLSAI2CFGR_PLLSAI2N_Pos) | + (((PllSai2->PLLSAI2Q >> 1U) - 1U) << RCC_PLLSAI2CFGR_PLLSAI2Q_Pos)); +#endif /* RCC_PLLSAI2M_DIV_1_16_SUPPORT */ + } +#endif /* RCC_PLLSAI2Q_DIV_SUPPORT */ + else + { + assert_param(IS_RCC_PLLSAI2R_VALUE(PllSai2->PLLSAI2R)); +#if defined(RCC_PLLSAI2M_DIV_1_16_SUPPORT) + /* Configure the PLLSAI2 Division factor M, R and Multiplication factor N*/ + MODIFY_REG(RCC->PLLSAI2CFGR, + RCC_PLLSAI2CFGR_PLLSAI2N | RCC_PLLSAI2CFGR_PLLSAI2R | RCC_PLLSAI2CFGR_PLLSAI2M, + (PllSai2->PLLSAI2N << RCC_PLLSAI2CFGR_PLLSAI2N_Pos) | + (((PllSai2->PLLSAI2R >> 1U) - 1U) << RCC_PLLSAI2CFGR_PLLSAI2R_Pos) | + ((PllSai2->PLLSAI2M - 1U) << RCC_PLLSAI2CFGR_PLLSAI2M_Pos)); +#else + /* Configure the PLLSAI2 Division factor R and Multiplication factor N*/ + MODIFY_REG(RCC->PLLSAI2CFGR, + RCC_PLLSAI2CFGR_PLLSAI2N | RCC_PLLSAI2CFGR_PLLSAI2R, + (PllSai2->PLLSAI2N << RCC_PLLSAI2CFGR_PLLSAI2N_Pos) | + (((PllSai2->PLLSAI2R >> 1U) - 1U) << RCC_PLLSAI2CFGR_PLLSAI2R_Pos)); +#endif /* RCC_PLLSAI2M_DIV_1_16_SUPPORT */ + } + + /* Enable the PLLSAI2 again by setting PLLSAI2ON to 1*/ + __HAL_RCC_PLLSAI2_ENABLE(); + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till PLLSAI2 is ready */ + while(READ_BIT(RCC->CR, RCC_CR_PLLSAI2RDY) == 0U) + { + if((HAL_GetTick() - tickstart) > PLLSAI2_TIMEOUT_VALUE) + { + status = HAL_TIMEOUT; + break; + } + } + + if(status == HAL_OK) + { + /* Configure the PLLSAI2 Clock output(s) */ + __HAL_RCC_PLLSAI2CLKOUT_ENABLE(PllSai2->PLLSAI2ClockOut); + } + } + } + + return status; +} + +#endif /* RCC_PLLSAI2_SUPPORT */ + +#if defined(SAI1) + +static uint32_t RCCEx_GetSAIxPeriphCLKFreq(uint32_t PeriphClk, uint32_t InputFrequency) +{ + uint32_t frequency = 0U; + uint32_t srcclk = 0U; + uint32_t pllvco, plln; /* no init needed */ +#if defined(RCC_PLLP_SUPPORT) + uint32_t pllp = 0U; +#endif /* RCC_PLLP_SUPPORT */ + + /* Handle SAIs */ + if(PeriphClk == RCC_PERIPHCLK_SAI1) + { + srcclk = __HAL_RCC_GET_SAI1_SOURCE(); + if(srcclk == RCC_SAI1CLKSOURCE_PIN) + { + frequency = EXTERNAL_SAI1_CLOCK_VALUE; + } + /* Else, PLL clock output to check below */ + } +#if defined(SAI2) + else + { + if(PeriphClk == RCC_PERIPHCLK_SAI2) + { + srcclk = __HAL_RCC_GET_SAI2_SOURCE(); + if(srcclk == RCC_SAI2CLKSOURCE_PIN) + { + frequency = EXTERNAL_SAI2_CLOCK_VALUE; + } + /* Else, PLL clock output to check below */ + } + } +#endif /* SAI2 */ + + if(frequency == 0U) + { + pllvco = InputFrequency; + +#if defined(SAI2) + if((srcclk == RCC_SAI1CLKSOURCE_PLL) || (srcclk == RCC_SAI2CLKSOURCE_PLL)) + { + if(HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLLRDY) && (__HAL_RCC_GET_PLLCLKOUT_CONFIG(RCC_PLL_SAI3CLK) != 0U)) + { + /* f(PLL Source) / PLLM */ + pllvco = (pllvco / ((READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLM) >> RCC_PLLCFGR_PLLM_Pos) + 1U)); + /* f(PLLSAI3CLK) = f(VCO input) * PLLN / PLLP */ + plln = READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLN) >> RCC_PLLCFGR_PLLN_Pos; +#if defined(RCC_PLLP_DIV_2_31_SUPPORT) + pllp = READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLPDIV) >> RCC_PLLCFGR_PLLPDIV_Pos; +#endif + if(pllp == 0U) + { + if(READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLP) != 0U) + { + pllp = 17U; + } + else + { + pllp = 7U; + } + } + frequency = (pllvco * plln) / pllp; + } + } + else if(srcclk == 0U) /* RCC_SAI1CLKSOURCE_PLLSAI1 || RCC_SAI2CLKSOURCE_PLLSAI1 */ + { + if(HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLLSAI1RDY) && (__HAL_RCC_GET_PLLSAI1CLKOUT_CONFIG(RCC_PLLSAI1_SAI1CLK) != 0U)) + { +#if defined(RCC_PLLSAI1M_DIV_1_16_SUPPORT) + /* PLLSAI1M exists: apply PLLSAI1M divider for PLLSAI1 output computation */ + /* f(PLLSAI1 Source) / PLLSAI1M */ + pllvco = (pllvco / ((READ_BIT(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1M) >> RCC_PLLSAI1CFGR_PLLSAI1M_Pos) + 1U)); +#else + /* f(PLL Source) / PLLM */ + pllvco = (pllvco / ((READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLM) >> RCC_PLLCFGR_PLLM_Pos) + 1U)); +#endif + /* f(PLLSAI1CLK) = f(VCOSAI1 input) * PLLSAI1N / PLLSAI1P */ + plln = READ_BIT(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1N) >> RCC_PLLSAI1CFGR_PLLSAI1N_Pos; +#if defined(RCC_PLLSAI1P_DIV_2_31_SUPPORT) + pllp = READ_BIT(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1PDIV) >> RCC_PLLSAI1CFGR_PLLSAI1PDIV_Pos; +#endif + if(pllp == 0U) + { + if(READ_BIT(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1P) != 0U) + { + pllp = 17U; + } + else + { + pllp = 7U; + } + } + frequency = (pllvco * plln) / pllp; + } + } +#if defined(STM32L4P5xx) || defined(STM32L4Q5xx) || defined(STM32L4R5xx) || defined(STM32L4R7xx) || defined(STM32L4R9xx) || defined(STM32L4S5xx) || defined(STM32L4S7xx) || defined(STM32L4S9xx) + else if((srcclk == RCC_SAI1CLKSOURCE_HSI) || (srcclk == RCC_SAI2CLKSOURCE_HSI)) + { + if(HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSIRDY)) + { + frequency = HSI_VALUE; + } + } +#endif /* STM32L4P5xx || STM32L4Q5xx || STM32L4R5xx || STM32L4R7xx || STM32L4R9xx || STM32L4S5xx || STM32L4S7xx || STM32L4S9xx */ + +#else + if(srcclk == RCC_SAI1CLKSOURCE_PLL) + { + if(HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLLRDY) && (__HAL_RCC_GET_PLLCLKOUT_CONFIG(RCC_PLL_SAI2CLK) != 0U)) + { + /* f(PLL Source) / PLLM */ + pllvco = (pllvco / ((READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLM) >> RCC_PLLCFGR_PLLM_Pos) + 1U)); + /* f(PLLSAI2CLK) = f(VCO input) * PLLN / PLLP */ + plln = READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLN) >> RCC_PLLCFGR_PLLN_Pos; +#if defined(RCC_PLLP_DIV_2_31_SUPPORT) + pllp = READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLPDIV) >> RCC_PLLCFGR_PLLPDIV_Pos; +#endif + if(pllp == 0U) + { + if(READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLP) != 0U) + { + pllp = 17U; + } + else + { + pllp = 7U; + } + } + frequency = (pllvco * plln) / pllp; + } + else if(HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSIRDY)) + { + /* HSI automatically selected as clock source if PLLs not enabled */ + frequency = HSI_VALUE; + } + else + { + /* No clock source, frequency default init at 0 */ + } + } + else if(srcclk == RCC_SAI1CLKSOURCE_PLLSAI1) + { + if(HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLLSAI1RDY) && (__HAL_RCC_GET_PLLSAI1CLKOUT_CONFIG(RCC_PLLSAI1_SAI1CLK) != 0U)) + { +#if defined(RCC_PLLSAI1M_DIV_1_16_SUPPORT) + /* PLLSAI1M exists: apply PLLSAI1M divider for PLLSAI1 output computation */ + /* f(PLLSAI1 Source) / PLLSAI1M */ + pllvco = (pllvco / ((READ_BIT(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1M) >> RCC_PLLSAI1CFGR_PLLSAI1M_Pos) + 1U)); +#else + /* f(PLL Source) / PLLM */ + pllvco = (pllvco / ((READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLM) >> RCC_PLLCFGR_PLLM_Pos) + 1U)); +#endif + /* f(PLLSAI1CLK) = f(VCOSAI1 input) * PLLSAI1N / PLLSAI1P */ + plln = READ_BIT(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1N) >> RCC_PLLSAI1CFGR_PLLSAI1N_Pos; +#if defined(RCC_PLLSAI1P_DIV_2_31_SUPPORT) + pllp = READ_BIT(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1PDIV) >> RCC_PLLSAI1CFGR_PLLSAI1PDIV_Pos; +#endif + if(pllp == 0U) + { + if(READ_BIT(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1P) != 0U) + { + pllp = 17U; + } + else + { + pllp = 7U; + } + } + frequency = (pllvco * plln) / pllp; + } + else if(HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSIRDY)) + { + /* HSI automatically selected as clock source if PLLs not enabled */ + frequency = HSI_VALUE; + } + else + { + /* No clock source, frequency default init at 0 */ + } + } +#endif /* SAI2 */ + +#if defined(RCC_PLLSAI2_SUPPORT) + + else if((srcclk == RCC_SAI1CLKSOURCE_PLLSAI2) || (srcclk == RCC_SAI2CLKSOURCE_PLLSAI2)) + { + if(HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLLSAI2RDY) && (__HAL_RCC_GET_PLLSAI2CLKOUT_CONFIG(RCC_PLLSAI2_SAI2CLK) != 0U)) + { +#if defined(RCC_PLLSAI2M_DIV_1_16_SUPPORT) + /* PLLSAI2M exists: apply PLLSAI2M divider for PLLSAI2 output computation */ + /* f(PLLSAI2 Source) / PLLSAI2M */ + pllvco = (pllvco / ((READ_BIT(RCC->PLLSAI2CFGR, RCC_PLLSAI2CFGR_PLLSAI2M) >> RCC_PLLSAI2CFGR_PLLSAI2M_Pos) + 1U)); +#else + /* f(PLL Source) / PLLM */ + pllvco = (pllvco / ((READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLM) >> RCC_PLLCFGR_PLLM_Pos) + 1U)); +#endif + /* f(PLLSAI2CLK) = f(VCOSAI2 input) * PLLSAI2N / PLLSAI2P */ + plln = READ_BIT(RCC->PLLSAI2CFGR, RCC_PLLSAI2CFGR_PLLSAI2N) >> RCC_PLLSAI2CFGR_PLLSAI2N_Pos; +#if defined(RCC_PLLSAI2P_DIV_2_31_SUPPORT) + pllp = READ_BIT(RCC->PLLSAI2CFGR, RCC_PLLSAI2CFGR_PLLSAI2PDIV) >> RCC_PLLSAI2CFGR_PLLSAI2PDIV_Pos; +#endif + if(pllp == 0U) + { + if(READ_BIT(RCC->PLLSAI2CFGR, RCC_PLLSAI2CFGR_PLLSAI2P) != 0U) + { + pllp = 17U; + } + else + { + pllp = 7U; + } + } + frequency = (pllvco * plln) / pllp; + } + } + +#endif /* RCC_PLLSAI2_SUPPORT */ + + else + { + /* No clock source, frequency default init at 0 */ + } + } + + + return frequency; +} + +#endif /* SAI1 */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_RCC_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + + diff --git a/CablePositioning_IAP_V1.0/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_spi.c b/CablePositioning_IAP_V1.0/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_spi.c index 4093b0a..ffcd0ab 100644 --- a/CablePositioning_IAP_V1.0/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_spi.c +++ b/CablePositioning_IAP_V1.0/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_spi.c @@ -1,4436 +1,4472 @@ -/** - ****************************************************************************** - * @file stm32l4xx_hal_spi.c - * @author MCD Application Team - * @brief SPI HAL module driver. - * This file provides firmware functions to manage the following - * functionalities of the Serial Peripheral Interface (SPI) peripheral: - * + Initialization and de-initialization functions - * + IO operation functions - * + Peripheral Control functions - * + Peripheral State functions - ****************************************************************************** - * @attention - * - * Copyright (c) 2017 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - @verbatim - ============================================================================== - ##### How to use this driver ##### - ============================================================================== - [..] - The SPI HAL driver can be used as follows: - - (#) Declare a SPI_HandleTypeDef handle structure, for example: - SPI_HandleTypeDef hspi; - - (#)Initialize the SPI low level resources by implementing the HAL_SPI_MspInit() API: - (##) Enable the SPIx interface clock - (##) SPI pins configuration - (+++) Enable the clock for the SPI GPIOs - (+++) Configure these SPI pins as alternate function push-pull - (##) NVIC configuration if you need to use interrupt process - (+++) Configure the SPIx interrupt priority - (+++) Enable the NVIC SPI IRQ handle - (##) DMA Configuration if you need to use DMA process - (+++) Declare a DMA_HandleTypeDef handle structure for the transmit or receive Stream/Channel - (+++) Enable the DMAx clock - (+++) Configure the DMA handle parameters - (+++) Configure the DMA Tx or Rx Stream/Channel - (+++) Associate the initialized hdma_tx(or _rx) handle to the hspi DMA Tx or Rx handle - (+++) Configure the priority and enable the NVIC for the transfer complete interrupt on the DMA Tx or Rx Stream/Channel - - (#) Program the Mode, BidirectionalMode , Data size, Baudrate Prescaler, NSS - management, Clock polarity and phase, FirstBit and CRC configuration in the hspi Init structure. - - (#) Initialize the SPI registers by calling the HAL_SPI_Init() API: - (++) This API configures also the low level Hardware GPIO, CLOCK, CORTEX...etc) - by calling the customized HAL_SPI_MspInit() API. - [..] - Circular mode restriction: - (#) The DMA circular mode cannot be used when the SPI is configured in these modes: - (##) Master 2Lines RxOnly - (##) Master 1Line Rx - (#) The CRC feature is not managed when the DMA circular mode is enabled - (#) When the SPI DMA Pause/Stop features are used, we must use the following APIs - the HAL_SPI_DMAPause()/ HAL_SPI_DMAStop() only under the SPI callbacks - [..] - Master Receive mode restriction: - (#) In Master unidirectional receive-only mode (MSTR =1, BIDIMODE=0, RXONLY=1) or - bidirectional receive mode (MSTR=1, BIDIMODE=1, BIDIOE=0), to ensure that the SPI - does not initiate a new transfer the following procedure has to be respected: - (##) HAL_SPI_DeInit() - (##) HAL_SPI_Init() - [..] - Callback registration: - - (#) The compilation flag USE_HAL_SPI_REGISTER_CALLBACKS when set to 1U - allows the user to configure dynamically the driver callbacks. - Use Functions HAL_SPI_RegisterCallback() to register an interrupt callback. - - Function HAL_SPI_RegisterCallback() allows to register following callbacks: - (++) TxCpltCallback : SPI Tx Completed callback - (++) RxCpltCallback : SPI Rx Completed callback - (++) TxRxCpltCallback : SPI TxRx Completed callback - (++) TxHalfCpltCallback : SPI Tx Half Completed callback - (++) RxHalfCpltCallback : SPI Rx Half Completed callback - (++) TxRxHalfCpltCallback : SPI TxRx Half Completed callback - (++) ErrorCallback : SPI Error callback - (++) AbortCpltCallback : SPI Abort callback - (++) MspInitCallback : SPI Msp Init callback - (++) MspDeInitCallback : SPI Msp DeInit callback - This function takes as parameters the HAL peripheral handle, the Callback ID - and a pointer to the user callback function. - - - (#) Use function HAL_SPI_UnRegisterCallback to reset a callback to the default - weak function. - HAL_SPI_UnRegisterCallback takes as parameters the HAL peripheral handle, - and the Callback ID. - This function allows to reset following callbacks: - (++) TxCpltCallback : SPI Tx Completed callback - (++) RxCpltCallback : SPI Rx Completed callback - (++) TxRxCpltCallback : SPI TxRx Completed callback - (++) TxHalfCpltCallback : SPI Tx Half Completed callback - (++) RxHalfCpltCallback : SPI Rx Half Completed callback - (++) TxRxHalfCpltCallback : SPI TxRx Half Completed callback - (++) ErrorCallback : SPI Error callback - (++) AbortCpltCallback : SPI Abort callback - (++) MspInitCallback : SPI Msp Init callback - (++) MspDeInitCallback : SPI Msp DeInit callback - - [..] - By default, after the HAL_SPI_Init() and when the state is HAL_SPI_STATE_RESET - all callbacks are set to the corresponding weak functions: - examples HAL_SPI_MasterTxCpltCallback(), HAL_SPI_MasterRxCpltCallback(). - Exception done for MspInit and MspDeInit functions that are - reset to the legacy weak functions in the HAL_SPI_Init()/ HAL_SPI_DeInit() only when - these callbacks are null (not registered beforehand). - If MspInit or MspDeInit are not null, the HAL_SPI_Init()/ HAL_SPI_DeInit() - keep and use the user MspInit/MspDeInit callbacks (registered beforehand) whatever the state. - - [..] - Callbacks can be registered/unregistered in HAL_SPI_STATE_READY state only. - Exception done MspInit/MspDeInit functions that can be registered/unregistered - in HAL_SPI_STATE_READY or HAL_SPI_STATE_RESET state, - thus registered (user) MspInit/DeInit callbacks can be used during the Init/DeInit. - Then, the user first registers the MspInit/MspDeInit user callbacks - using HAL_SPI_RegisterCallback() before calling HAL_SPI_DeInit() - or HAL_SPI_Init() function. - - [..] - When the compilation define USE_HAL_PPP_REGISTER_CALLBACKS is set to 0 or - not defined, the callback registering feature is not available - and weak (surcharged) callbacks are used. - - [..] - Using the HAL it is not possible to reach all supported SPI frequency with the different SPI Modes, - the following table resume the max SPI frequency reached with data size 8bits/16bits, - according to frequency of the APBx Peripheral Clock (fPCLK) used by the SPI instance. - - @endverbatim - - Additional table : - - DataSize = SPI_DATASIZE_8BIT: - +----------------------------------------------------------------------------------------------+ - | | | 2Lines Fullduplex | 2Lines RxOnly | 1Line | - | Process | Transfer mode |---------------------|----------------------|----------------------| - | | | Master | Slave | Master | Slave | Master | Slave | - |==============================================================================================| - | T | Polling | Fpclk/4 | Fpclk/8 | NA | NA | NA | NA | - | X |----------------|----------|----------|-----------|----------|-----------|----------| - | / | Interrupt | Fpclk/4 | Fpclk/16 | NA | NA | NA | NA | - | R |----------------|----------|----------|-----------|----------|-----------|----------| - | X | DMA | Fpclk/2 | Fpclk/2 | NA | NA | NA | NA | - |=========|================|==========|==========|===========|==========|===========|==========| - | | Polling | Fpclk/4 | Fpclk/8 | Fpclk/16 | Fpclk/8 | Fpclk/8 | Fpclk/8 | - | |----------------|----------|----------|-----------|----------|-----------|----------| - | R | Interrupt | Fpclk/8 | Fpclk/16 | Fpclk/8 | Fpclk/8 | Fpclk/8 | Fpclk/4 | - | X |----------------|----------|----------|-----------|----------|-----------|----------| - | | DMA | Fpclk/4 | Fpclk/2 | Fpclk/2 | Fpclk/16 | Fpclk/2 | Fpclk/16 | - |=========|================|==========|==========|===========|==========|===========|==========| - | | Polling | Fpclk/8 | Fpclk/2 | NA | NA | Fpclk/8 | Fpclk/8 | - | |----------------|----------|----------|-----------|----------|-----------|----------| - | T | Interrupt | Fpclk/2 | Fpclk/4 | NA | NA | Fpclk/16 | Fpclk/8 | - | X |----------------|----------|----------|-----------|----------|-----------|----------| - | | DMA | Fpclk/2 | Fpclk/2 | NA | NA | Fpclk/8 | Fpclk/16 | - +----------------------------------------------------------------------------------------------+ - - DataSize = SPI_DATASIZE_16BIT: - +----------------------------------------------------------------------------------------------+ - | | | 2Lines Fullduplex | 2Lines RxOnly | 1Line | - | Process | Transfer mode |---------------------|----------------------|----------------------| - | | | Master | Slave | Master | Slave | Master | Slave | - |==============================================================================================| - | T | Polling | Fpclk/4 | Fpclk/8 | NA | NA | NA | NA | - | X |----------------|----------|----------|-----------|----------|-----------|----------| - | / | Interrupt | Fpclk/4 | Fpclk/16 | NA | NA | NA | NA | - | R |----------------|----------|----------|-----------|----------|-----------|----------| - | X | DMA | Fpclk/2 | Fpclk/2 | NA | NA | NA | NA | - |=========|================|==========|==========|===========|==========|===========|==========| - | | Polling | Fpclk/4 | Fpclk/8 | Fpclk/16 | Fpclk/8 | Fpclk/8 | Fpclk/8 | - | |----------------|----------|----------|-----------|----------|-----------|----------| - | R | Interrupt | Fpclk/8 | Fpclk/16 | Fpclk/8 | Fpclk/8 | Fpclk/8 | Fpclk/4 | - | X |----------------|----------|----------|-----------|----------|-----------|----------| - | | DMA | Fpclk/4 | Fpclk/2 | Fpclk/2 | Fpclk/16 | Fpclk/2 | Fpclk/16 | - |=========|================|==========|==========|===========|==========|===========|==========| - | | Polling | Fpclk/8 | Fpclk/2 | NA | NA | Fpclk/8 | Fpclk/8 | - | |----------------|----------|----------|-----------|----------|-----------|----------| - | T | Interrupt | Fpclk/2 | Fpclk/4 | NA | NA | Fpclk/16 | Fpclk/8 | - | X |----------------|----------|----------|-----------|----------|-----------|----------| - | | DMA | Fpclk/2 | Fpclk/2 | NA | NA | Fpclk/8 | Fpclk/16 | - +----------------------------------------------------------------------------------------------+ - @note The max SPI frequency depend on SPI data size (4bits, 5bits,..., 8bits,...15bits, 16bits), - SPI mode(2 Lines fullduplex, 2 lines RxOnly, 1 line TX/RX) and Process mode (Polling, IT, DMA). - @note - (#) TX/RX processes are HAL_SPI_TransmitReceive(), HAL_SPI_TransmitReceive_IT() and HAL_SPI_TransmitReceive_DMA() - (#) RX processes are HAL_SPI_Receive(), HAL_SPI_Receive_IT() and HAL_SPI_Receive_DMA() - (#) TX processes are HAL_SPI_Transmit(), HAL_SPI_Transmit_IT() and HAL_SPI_Transmit_DMA() - - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32l4xx_hal.h" - -/** @addtogroup STM32L4xx_HAL_Driver - * @{ - */ - -/** @defgroup SPI SPI - * @brief SPI HAL module driver - * @{ - */ -#ifdef HAL_SPI_MODULE_ENABLED - -/* Private typedef -----------------------------------------------------------*/ -/* Private defines -----------------------------------------------------------*/ -/** @defgroup SPI_Private_Constants SPI Private Constants - * @{ - */ -#define SPI_DEFAULT_TIMEOUT 100U -/** - * @} - */ - -/* Private macros ------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ -/** @defgroup SPI_Private_Functions SPI Private Functions - * @{ - */ -static void SPI_DMATransmitCplt(DMA_HandleTypeDef *hdma); -static void SPI_DMAReceiveCplt(DMA_HandleTypeDef *hdma); -static void SPI_DMATransmitReceiveCplt(DMA_HandleTypeDef *hdma); -static void SPI_DMAHalfTransmitCplt(DMA_HandleTypeDef *hdma); -static void SPI_DMAHalfReceiveCplt(DMA_HandleTypeDef *hdma); -static void SPI_DMAHalfTransmitReceiveCplt(DMA_HandleTypeDef *hdma); -static void SPI_DMAError(DMA_HandleTypeDef *hdma); -static void SPI_DMAAbortOnError(DMA_HandleTypeDef *hdma); -static void SPI_DMATxAbortCallback(DMA_HandleTypeDef *hdma); -static void SPI_DMARxAbortCallback(DMA_HandleTypeDef *hdma); -static HAL_StatusTypeDef SPI_WaitFlagStateUntilTimeout(SPI_HandleTypeDef *hspi, uint32_t Flag, FlagStatus State, - uint32_t Timeout, uint32_t Tickstart); -static HAL_StatusTypeDef SPI_WaitFifoStateUntilTimeout(SPI_HandleTypeDef *hspi, uint32_t Fifo, uint32_t State, - uint32_t Timeout, uint32_t Tickstart); -static void SPI_TxISR_8BIT(struct __SPI_HandleTypeDef *hspi); -static void SPI_TxISR_16BIT(struct __SPI_HandleTypeDef *hspi); -static void SPI_RxISR_8BIT(struct __SPI_HandleTypeDef *hspi); -static void SPI_RxISR_16BIT(struct __SPI_HandleTypeDef *hspi); -static void SPI_2linesRxISR_8BIT(struct __SPI_HandleTypeDef *hspi); -static void SPI_2linesTxISR_8BIT(struct __SPI_HandleTypeDef *hspi); -static void SPI_2linesTxISR_16BIT(struct __SPI_HandleTypeDef *hspi); -static void SPI_2linesRxISR_16BIT(struct __SPI_HandleTypeDef *hspi); -#if (USE_SPI_CRC != 0U) -static void SPI_RxISR_8BITCRC(struct __SPI_HandleTypeDef *hspi); -static void SPI_RxISR_16BITCRC(struct __SPI_HandleTypeDef *hspi); -static void SPI_2linesRxISR_8BITCRC(struct __SPI_HandleTypeDef *hspi); -static void SPI_2linesRxISR_16BITCRC(struct __SPI_HandleTypeDef *hspi); -#endif /* USE_SPI_CRC */ -static void SPI_AbortRx_ISR(SPI_HandleTypeDef *hspi); -static void SPI_AbortTx_ISR(SPI_HandleTypeDef *hspi); -static void SPI_CloseRxTx_ISR(SPI_HandleTypeDef *hspi); -static void SPI_CloseRx_ISR(SPI_HandleTypeDef *hspi); -static void SPI_CloseTx_ISR(SPI_HandleTypeDef *hspi); -static HAL_StatusTypeDef SPI_EndRxTransaction(SPI_HandleTypeDef *hspi, uint32_t Timeout, uint32_t Tickstart); -static HAL_StatusTypeDef SPI_EndRxTxTransaction(SPI_HandleTypeDef *hspi, uint32_t Timeout, uint32_t Tickstart); -/** - * @} - */ - -/* Exported functions --------------------------------------------------------*/ -/** @defgroup SPI_Exported_Functions SPI Exported Functions - * @{ - */ - -/** @defgroup SPI_Exported_Functions_Group1 Initialization and de-initialization functions - * @brief Initialization and Configuration functions - * -@verbatim - =============================================================================== - ##### Initialization and de-initialization functions ##### - =============================================================================== - [..] This subsection provides a set of functions allowing to initialize and - de-initialize the SPIx peripheral: - - (+) User must implement HAL_SPI_MspInit() function in which he configures - all related peripherals resources (CLOCK, GPIO, DMA, IT and NVIC ). - - (+) Call the function HAL_SPI_Init() to configure the selected device with - the selected configuration: - (++) Mode - (++) Direction - (++) Data Size - (++) Clock Polarity and Phase - (++) NSS Management - (++) BaudRate Prescaler - (++) FirstBit - (++) TIMode - (++) CRC Calculation - (++) CRC Polynomial if CRC enabled - (++) CRC Length, used only with Data8 and Data16 - (++) FIFO reception threshold - - (+) Call the function HAL_SPI_DeInit() to restore the default configuration - of the selected SPIx peripheral. - -@endverbatim - * @{ - */ - -/** - * @brief Initialize the SPI according to the specified parameters - * in the SPI_InitTypeDef and initialize the associated handle. - * @param hspi pointer to a SPI_HandleTypeDef structure that contains - * the configuration information for SPI module. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_SPI_Init(SPI_HandleTypeDef *hspi) -{ - uint32_t frxth; - - /* Check the SPI handle allocation */ - if (hspi == NULL) - { - return HAL_ERROR; - } - - /* Check the parameters */ - assert_param(IS_SPI_ALL_INSTANCE(hspi->Instance)); - assert_param(IS_SPI_MODE(hspi->Init.Mode)); - assert_param(IS_SPI_DIRECTION(hspi->Init.Direction)); - assert_param(IS_SPI_DATASIZE(hspi->Init.DataSize)); - assert_param(IS_SPI_NSS(hspi->Init.NSS)); - assert_param(IS_SPI_NSSP(hspi->Init.NSSPMode)); - assert_param(IS_SPI_BAUDRATE_PRESCALER(hspi->Init.BaudRatePrescaler)); - assert_param(IS_SPI_FIRST_BIT(hspi->Init.FirstBit)); - assert_param(IS_SPI_TIMODE(hspi->Init.TIMode)); - if (hspi->Init.TIMode == SPI_TIMODE_DISABLE) - { - assert_param(IS_SPI_CPOL(hspi->Init.CLKPolarity)); - assert_param(IS_SPI_CPHA(hspi->Init.CLKPhase)); - - if (hspi->Init.Mode == SPI_MODE_MASTER) - { - assert_param(IS_SPI_BAUDRATE_PRESCALER(hspi->Init.BaudRatePrescaler)); - } - else - { - /* Baudrate prescaler not use in Motoraola Slave mode. force to default value */ - hspi->Init.BaudRatePrescaler = SPI_BAUDRATEPRESCALER_2; - } - } - else - { - assert_param(IS_SPI_BAUDRATE_PRESCALER(hspi->Init.BaudRatePrescaler)); - - /* Force polarity and phase to TI protocaol requirements */ - hspi->Init.CLKPolarity = SPI_POLARITY_LOW; - hspi->Init.CLKPhase = SPI_PHASE_1EDGE; - } -#if (USE_SPI_CRC != 0U) - assert_param(IS_SPI_CRC_CALCULATION(hspi->Init.CRCCalculation)); - if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) - { - assert_param(IS_SPI_CRC_POLYNOMIAL(hspi->Init.CRCPolynomial)); - assert_param(IS_SPI_CRC_LENGTH(hspi->Init.CRCLength)); - } -#else - hspi->Init.CRCCalculation = SPI_CRCCALCULATION_DISABLE; -#endif /* USE_SPI_CRC */ - - if (hspi->State == HAL_SPI_STATE_RESET) - { - /* Allocate lock resource and initialize it */ - hspi->Lock = HAL_UNLOCKED; - -#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) - /* Init the SPI Callback settings */ - hspi->TxCpltCallback = HAL_SPI_TxCpltCallback; /* Legacy weak TxCpltCallback */ - hspi->RxCpltCallback = HAL_SPI_RxCpltCallback; /* Legacy weak RxCpltCallback */ - hspi->TxRxCpltCallback = HAL_SPI_TxRxCpltCallback; /* Legacy weak TxRxCpltCallback */ - hspi->TxHalfCpltCallback = HAL_SPI_TxHalfCpltCallback; /* Legacy weak TxHalfCpltCallback */ - hspi->RxHalfCpltCallback = HAL_SPI_RxHalfCpltCallback; /* Legacy weak RxHalfCpltCallback */ - hspi->TxRxHalfCpltCallback = HAL_SPI_TxRxHalfCpltCallback; /* Legacy weak TxRxHalfCpltCallback */ - hspi->ErrorCallback = HAL_SPI_ErrorCallback; /* Legacy weak ErrorCallback */ - hspi->AbortCpltCallback = HAL_SPI_AbortCpltCallback; /* Legacy weak AbortCpltCallback */ - - if (hspi->MspInitCallback == NULL) - { - hspi->MspInitCallback = HAL_SPI_MspInit; /* Legacy weak MspInit */ - } - - /* Init the low level hardware : GPIO, CLOCK, NVIC... */ - hspi->MspInitCallback(hspi); -#else - /* Init the low level hardware : GPIO, CLOCK, NVIC... */ - HAL_SPI_MspInit(hspi); -#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ - } - - hspi->State = HAL_SPI_STATE_BUSY; - - /* Disable the selected SPI peripheral */ - __HAL_SPI_DISABLE(hspi); - - /* Align by default the rs fifo threshold on the data size */ - if (hspi->Init.DataSize > SPI_DATASIZE_8BIT) - { - frxth = SPI_RXFIFO_THRESHOLD_HF; - } - else - { - frxth = SPI_RXFIFO_THRESHOLD_QF; - } - - /* CRC calculation is valid only for 16Bit and 8 Bit */ - if ((hspi->Init.DataSize != SPI_DATASIZE_16BIT) && (hspi->Init.DataSize != SPI_DATASIZE_8BIT)) - { - /* CRC must be disabled */ - hspi->Init.CRCCalculation = SPI_CRCCALCULATION_DISABLE; - } - - /*----------------------- SPIx CR1 & CR2 Configuration ---------------------*/ - /* Configure : SPI Mode, Communication Mode, Clock polarity and phase, NSS management, - Communication speed, First bit and CRC calculation state */ - WRITE_REG(hspi->Instance->CR1, ((hspi->Init.Mode & (SPI_CR1_MSTR | SPI_CR1_SSI)) | - (hspi->Init.Direction & (SPI_CR1_RXONLY | SPI_CR1_BIDIMODE)) | - (hspi->Init.CLKPolarity & SPI_CR1_CPOL) | - (hspi->Init.CLKPhase & SPI_CR1_CPHA) | - (hspi->Init.NSS & SPI_CR1_SSM) | - (hspi->Init.BaudRatePrescaler & SPI_CR1_BR_Msk) | - (hspi->Init.FirstBit & SPI_CR1_LSBFIRST) | - (hspi->Init.CRCCalculation & SPI_CR1_CRCEN))); -#if (USE_SPI_CRC != 0U) - /*---------------------------- SPIx CRCL Configuration -------------------*/ - if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) - { - /* Align the CRC Length on the data size */ - if (hspi->Init.CRCLength == SPI_CRC_LENGTH_DATASIZE) - { - /* CRC Length aligned on the data size : value set by default */ - if (hspi->Init.DataSize > SPI_DATASIZE_8BIT) - { - hspi->Init.CRCLength = SPI_CRC_LENGTH_16BIT; - } - else - { - hspi->Init.CRCLength = SPI_CRC_LENGTH_8BIT; - } - } - - /* Configure : CRC Length */ - if (hspi->Init.CRCLength == SPI_CRC_LENGTH_16BIT) - { - SET_BIT(hspi->Instance->CR1, SPI_CR1_CRCL); - } - } -#endif /* USE_SPI_CRC */ - - /* Configure : NSS management, TI Mode, NSS Pulse, Data size and Rx Fifo threshold */ - WRITE_REG(hspi->Instance->CR2, (((hspi->Init.NSS >> 16U) & SPI_CR2_SSOE) | - (hspi->Init.TIMode & SPI_CR2_FRF) | - (hspi->Init.NSSPMode & SPI_CR2_NSSP) | - (hspi->Init.DataSize & SPI_CR2_DS_Msk) | - (frxth & SPI_CR2_FRXTH))); - -#if (USE_SPI_CRC != 0U) - /*---------------------------- SPIx CRCPOLY Configuration ------------------*/ - /* Configure : CRC Polynomial */ - if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) - { - WRITE_REG(hspi->Instance->CRCPR, (hspi->Init.CRCPolynomial & SPI_CRCPR_CRCPOLY_Msk)); - } -#endif /* USE_SPI_CRC */ - -#if defined(SPI_I2SCFGR_I2SMOD) - /* Activate the SPI mode (Make sure that I2SMOD bit in I2SCFGR register is reset) */ - CLEAR_BIT(hspi->Instance->I2SCFGR, SPI_I2SCFGR_I2SMOD); -#endif /* SPI_I2SCFGR_I2SMOD */ - - hspi->ErrorCode = HAL_SPI_ERROR_NONE; - hspi->State = HAL_SPI_STATE_READY; - - return HAL_OK; -} - -/** - * @brief De-Initialize the SPI peripheral. - * @param hspi pointer to a SPI_HandleTypeDef structure that contains - * the configuration information for SPI module. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_SPI_DeInit(SPI_HandleTypeDef *hspi) -{ - /* Check the SPI handle allocation */ - if (hspi == NULL) - { - return HAL_ERROR; - } - - /* Check SPI Instance parameter */ - assert_param(IS_SPI_ALL_INSTANCE(hspi->Instance)); - - hspi->State = HAL_SPI_STATE_BUSY; - - /* Disable the SPI Peripheral Clock */ - __HAL_SPI_DISABLE(hspi); - -#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) - if (hspi->MspDeInitCallback == NULL) - { - hspi->MspDeInitCallback = HAL_SPI_MspDeInit; /* Legacy weak MspDeInit */ - } - - /* DeInit the low level hardware: GPIO, CLOCK, NVIC... */ - hspi->MspDeInitCallback(hspi); -#else - /* DeInit the low level hardware: GPIO, CLOCK, NVIC... */ - HAL_SPI_MspDeInit(hspi); -#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ - - hspi->ErrorCode = HAL_SPI_ERROR_NONE; - hspi->State = HAL_SPI_STATE_RESET; - - /* Release Lock */ - __HAL_UNLOCK(hspi); - - return HAL_OK; -} - -/** - * @brief Initialize the SPI MSP. - * @param hspi pointer to a SPI_HandleTypeDef structure that contains - * the configuration information for SPI module. - * @retval None - */ -__weak void HAL_SPI_MspInit(SPI_HandleTypeDef *hspi) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hspi); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_SPI_MspInit should be implemented in the user file - */ -} - -/** - * @brief De-Initialize the SPI MSP. - * @param hspi pointer to a SPI_HandleTypeDef structure that contains - * the configuration information for SPI module. - * @retval None - */ -__weak void HAL_SPI_MspDeInit(SPI_HandleTypeDef *hspi) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hspi); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_SPI_MspDeInit should be implemented in the user file - */ -} - -#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) -/** - * @brief Register a User SPI Callback - * To be used instead of the weak predefined callback - * @param hspi Pointer to a SPI_HandleTypeDef structure that contains - * the configuration information for the specified SPI. - * @param CallbackID ID of the callback to be registered - * @param pCallback pointer to the Callback function - * @retval HAL status - */ -HAL_StatusTypeDef HAL_SPI_RegisterCallback(SPI_HandleTypeDef *hspi, HAL_SPI_CallbackIDTypeDef CallbackID, - pSPI_CallbackTypeDef pCallback) -{ - HAL_StatusTypeDef status = HAL_OK; - - if (pCallback == NULL) - { - /* Update the error code */ - hspi->ErrorCode |= HAL_SPI_ERROR_INVALID_CALLBACK; - - return HAL_ERROR; - } - /* Process locked */ - __HAL_LOCK(hspi); - - if (HAL_SPI_STATE_READY == hspi->State) - { - switch (CallbackID) - { - case HAL_SPI_TX_COMPLETE_CB_ID : - hspi->TxCpltCallback = pCallback; - break; - - case HAL_SPI_RX_COMPLETE_CB_ID : - hspi->RxCpltCallback = pCallback; - break; - - case HAL_SPI_TX_RX_COMPLETE_CB_ID : - hspi->TxRxCpltCallback = pCallback; - break; - - case HAL_SPI_TX_HALF_COMPLETE_CB_ID : - hspi->TxHalfCpltCallback = pCallback; - break; - - case HAL_SPI_RX_HALF_COMPLETE_CB_ID : - hspi->RxHalfCpltCallback = pCallback; - break; - - case HAL_SPI_TX_RX_HALF_COMPLETE_CB_ID : - hspi->TxRxHalfCpltCallback = pCallback; - break; - - case HAL_SPI_ERROR_CB_ID : - hspi->ErrorCallback = pCallback; - break; - - case HAL_SPI_ABORT_CB_ID : - hspi->AbortCpltCallback = pCallback; - break; - - case HAL_SPI_MSPINIT_CB_ID : - hspi->MspInitCallback = pCallback; - break; - - case HAL_SPI_MSPDEINIT_CB_ID : - hspi->MspDeInitCallback = pCallback; - break; - - default : - /* Update the error code */ - SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_INVALID_CALLBACK); - - /* Return error status */ - status = HAL_ERROR; - break; - } - } - else if (HAL_SPI_STATE_RESET == hspi->State) - { - switch (CallbackID) - { - case HAL_SPI_MSPINIT_CB_ID : - hspi->MspInitCallback = pCallback; - break; - - case HAL_SPI_MSPDEINIT_CB_ID : - hspi->MspDeInitCallback = pCallback; - break; - - default : - /* Update the error code */ - SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_INVALID_CALLBACK); - - /* Return error status */ - status = HAL_ERROR; - break; - } - } - else - { - /* Update the error code */ - SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_INVALID_CALLBACK); - - /* Return error status */ - status = HAL_ERROR; - } - - /* Release Lock */ - __HAL_UNLOCK(hspi); - return status; -} - -/** - * @brief Unregister an SPI Callback - * SPI callback is redirected to the weak predefined callback - * @param hspi Pointer to a SPI_HandleTypeDef structure that contains - * the configuration information for the specified SPI. - * @param CallbackID ID of the callback to be unregistered - * @retval HAL status - */ -HAL_StatusTypeDef HAL_SPI_UnRegisterCallback(SPI_HandleTypeDef *hspi, HAL_SPI_CallbackIDTypeDef CallbackID) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Process locked */ - __HAL_LOCK(hspi); - - if (HAL_SPI_STATE_READY == hspi->State) - { - switch (CallbackID) - { - case HAL_SPI_TX_COMPLETE_CB_ID : - hspi->TxCpltCallback = HAL_SPI_TxCpltCallback; /* Legacy weak TxCpltCallback */ - break; - - case HAL_SPI_RX_COMPLETE_CB_ID : - hspi->RxCpltCallback = HAL_SPI_RxCpltCallback; /* Legacy weak RxCpltCallback */ - break; - - case HAL_SPI_TX_RX_COMPLETE_CB_ID : - hspi->TxRxCpltCallback = HAL_SPI_TxRxCpltCallback; /* Legacy weak TxRxCpltCallback */ - break; - - case HAL_SPI_TX_HALF_COMPLETE_CB_ID : - hspi->TxHalfCpltCallback = HAL_SPI_TxHalfCpltCallback; /* Legacy weak TxHalfCpltCallback */ - break; - - case HAL_SPI_RX_HALF_COMPLETE_CB_ID : - hspi->RxHalfCpltCallback = HAL_SPI_RxHalfCpltCallback; /* Legacy weak RxHalfCpltCallback */ - break; - - case HAL_SPI_TX_RX_HALF_COMPLETE_CB_ID : - hspi->TxRxHalfCpltCallback = HAL_SPI_TxRxHalfCpltCallback; /* Legacy weak TxRxHalfCpltCallback */ - break; - - case HAL_SPI_ERROR_CB_ID : - hspi->ErrorCallback = HAL_SPI_ErrorCallback; /* Legacy weak ErrorCallback */ - break; - - case HAL_SPI_ABORT_CB_ID : - hspi->AbortCpltCallback = HAL_SPI_AbortCpltCallback; /* Legacy weak AbortCpltCallback */ - break; - - case HAL_SPI_MSPINIT_CB_ID : - hspi->MspInitCallback = HAL_SPI_MspInit; /* Legacy weak MspInit */ - break; - - case HAL_SPI_MSPDEINIT_CB_ID : - hspi->MspDeInitCallback = HAL_SPI_MspDeInit; /* Legacy weak MspDeInit */ - break; - - default : - /* Update the error code */ - SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_INVALID_CALLBACK); - - /* Return error status */ - status = HAL_ERROR; - break; - } - } - else if (HAL_SPI_STATE_RESET == hspi->State) - { - switch (CallbackID) - { - case HAL_SPI_MSPINIT_CB_ID : - hspi->MspInitCallback = HAL_SPI_MspInit; /* Legacy weak MspInit */ - break; - - case HAL_SPI_MSPDEINIT_CB_ID : - hspi->MspDeInitCallback = HAL_SPI_MspDeInit; /* Legacy weak MspDeInit */ - break; - - default : - /* Update the error code */ - SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_INVALID_CALLBACK); - - /* Return error status */ - status = HAL_ERROR; - break; - } - } - else - { - /* Update the error code */ - SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_INVALID_CALLBACK); - - /* Return error status */ - status = HAL_ERROR; - } - - /* Release Lock */ - __HAL_UNLOCK(hspi); - return status; -} -#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ -/** - * @} - */ - -/** @defgroup SPI_Exported_Functions_Group2 IO operation functions - * @brief Data transfers functions - * -@verbatim - ============================================================================== - ##### IO operation functions ##### - =============================================================================== - [..] - This subsection provides a set of functions allowing to manage the SPI - data transfers. - - [..] The SPI supports master and slave mode : - - (#) There are two modes of transfer: - (++) Blocking mode: The communication is performed in polling mode. - The HAL status of all data processing is returned by the same function - after finishing transfer. - (++) No-Blocking mode: The communication is performed using Interrupts - or DMA, These APIs return the HAL status. - The end of the data processing will be indicated through the - dedicated SPI IRQ when using Interrupt mode or the DMA IRQ when - using DMA mode. - The HAL_SPI_TxCpltCallback(), HAL_SPI_RxCpltCallback() and HAL_SPI_TxRxCpltCallback() user callbacks - will be executed respectively at the end of the transmit or Receive process - The HAL_SPI_ErrorCallback()user callback will be executed when a communication error is detected - - (#) APIs provided for these 2 transfer modes (Blocking mode or Non blocking mode using either Interrupt or DMA) - exist for 1Line (simplex) and 2Lines (full duplex) modes. - -@endverbatim - * @{ - */ - -/** - * @brief Transmit an amount of data in blocking mode. - * @param hspi pointer to a SPI_HandleTypeDef structure that contains - * the configuration information for SPI module. - * @param pData pointer to data buffer - * @param Size amount of data to be sent - * @param Timeout Timeout duration - * @retval HAL status - */ -HAL_StatusTypeDef HAL_SPI_Transmit(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size, uint32_t Timeout) -{ - uint32_t tickstart; - HAL_StatusTypeDef errorcode = HAL_OK; - uint16_t initial_TxXferCount; - - /* Check Direction parameter */ - assert_param(IS_SPI_DIRECTION_2LINES_OR_1LINE(hspi->Init.Direction)); - - /* Process Locked */ - __HAL_LOCK(hspi); - - /* Init tickstart for timeout management*/ - tickstart = HAL_GetTick(); - initial_TxXferCount = Size; - - if (hspi->State != HAL_SPI_STATE_READY) - { - errorcode = HAL_BUSY; - goto error; - } - - if ((pData == NULL) || (Size == 0U)) - { - errorcode = HAL_ERROR; - goto error; - } - - /* Set the transaction information */ - hspi->State = HAL_SPI_STATE_BUSY_TX; - hspi->ErrorCode = HAL_SPI_ERROR_NONE; - hspi->pTxBuffPtr = (uint8_t *)pData; - hspi->TxXferSize = Size; - hspi->TxXferCount = Size; - - /*Init field not used in handle to zero */ - hspi->pRxBuffPtr = (uint8_t *)NULL; - hspi->RxXferSize = 0U; - hspi->RxXferCount = 0U; - hspi->TxISR = NULL; - hspi->RxISR = NULL; - - /* Configure communication direction : 1Line */ - if (hspi->Init.Direction == SPI_DIRECTION_1LINE) - { - /* Disable SPI Peripheral before set 1Line direction (BIDIOE bit) */ - __HAL_SPI_DISABLE(hspi); - SPI_1LINE_TX(hspi); - } - -#if (USE_SPI_CRC != 0U) - /* Reset CRC Calculation */ - if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) - { - SPI_RESET_CRC(hspi); - } -#endif /* USE_SPI_CRC */ - - /* Check if the SPI is already enabled */ - if ((hspi->Instance->CR1 & SPI_CR1_SPE) != SPI_CR1_SPE) - { - /* Enable SPI peripheral */ - __HAL_SPI_ENABLE(hspi); - } - - /* Transmit data in 16 Bit mode */ - if (hspi->Init.DataSize > SPI_DATASIZE_8BIT) - { - if ((hspi->Init.Mode == SPI_MODE_SLAVE) || (initial_TxXferCount == 0x01U)) - { - hspi->Instance->DR = *((uint16_t *)hspi->pTxBuffPtr); - hspi->pTxBuffPtr += sizeof(uint16_t); - hspi->TxXferCount--; - } - /* Transmit data in 16 Bit mode */ - while (hspi->TxXferCount > 0U) - { - /* Wait until TXE flag is set to send data */ - if (__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_TXE)) - { - hspi->Instance->DR = *((uint16_t *)hspi->pTxBuffPtr); - hspi->pTxBuffPtr += sizeof(uint16_t); - hspi->TxXferCount--; - } - else - { - /* Timeout management */ - if ((((HAL_GetTick() - tickstart) >= Timeout) && (Timeout != HAL_MAX_DELAY)) || (Timeout == 0U)) - { - errorcode = HAL_TIMEOUT; - goto error; - } - } - } - } - /* Transmit data in 8 Bit mode */ - else - { - if ((hspi->Init.Mode == SPI_MODE_SLAVE) || (initial_TxXferCount == 0x01U)) - { - if (hspi->TxXferCount > 1U) - { - /* write on the data register in packing mode */ - hspi->Instance->DR = *((uint16_t *)hspi->pTxBuffPtr); - hspi->pTxBuffPtr += sizeof(uint16_t); - hspi->TxXferCount -= 2U; - } - else - { - *((__IO uint8_t *)&hspi->Instance->DR) = (*hspi->pTxBuffPtr); - hspi->pTxBuffPtr ++; - hspi->TxXferCount--; - } - } - while (hspi->TxXferCount > 0U) - { - /* Wait until TXE flag is set to send data */ - if (__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_TXE)) - { - if (hspi->TxXferCount > 1U) - { - /* write on the data register in packing mode */ - hspi->Instance->DR = *((uint16_t *)hspi->pTxBuffPtr); - hspi->pTxBuffPtr += sizeof(uint16_t); - hspi->TxXferCount -= 2U; - } - else - { - *((__IO uint8_t *)&hspi->Instance->DR) = (*hspi->pTxBuffPtr); - hspi->pTxBuffPtr++; - hspi->TxXferCount--; - } - } - else - { - /* Timeout management */ - if ((((HAL_GetTick() - tickstart) >= Timeout) && (Timeout != HAL_MAX_DELAY)) || (Timeout == 0U)) - { - errorcode = HAL_TIMEOUT; - goto error; - } - } - } - } -#if (USE_SPI_CRC != 0U) - /* Enable CRC Transmission */ - if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) - { - SET_BIT(hspi->Instance->CR1, SPI_CR1_CRCNEXT); - } -#endif /* USE_SPI_CRC */ - - /* Check the end of the transaction */ - if (SPI_EndRxTxTransaction(hspi, Timeout, tickstart) != HAL_OK) - { - hspi->ErrorCode = HAL_SPI_ERROR_FLAG; - } - - /* Clear overrun flag in 2 Lines communication mode because received is not read */ - if (hspi->Init.Direction == SPI_DIRECTION_2LINES) - { - __HAL_SPI_CLEAR_OVRFLAG(hspi); - } - - if (hspi->ErrorCode != HAL_SPI_ERROR_NONE) - { - errorcode = HAL_ERROR; - } - -error: - hspi->State = HAL_SPI_STATE_READY; - /* Process Unlocked */ - __HAL_UNLOCK(hspi); - return errorcode; -} - -/** - * @brief Receive an amount of data in blocking mode. - * @param hspi pointer to a SPI_HandleTypeDef structure that contains - * the configuration information for SPI module. - * @param pData pointer to data buffer - * @param Size amount of data to be received - * @param Timeout Timeout duration - * @retval HAL status - */ -HAL_StatusTypeDef HAL_SPI_Receive(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size, uint32_t Timeout) -{ -#if (USE_SPI_CRC != 0U) - __IO uint32_t tmpreg = 0U; - __IO uint8_t *ptmpreg8; - __IO uint8_t tmpreg8 = 0; -#endif /* USE_SPI_CRC */ - uint32_t tickstart; - HAL_StatusTypeDef errorcode = HAL_OK; - - if ((hspi->Init.Mode == SPI_MODE_MASTER) && (hspi->Init.Direction == SPI_DIRECTION_2LINES)) - { - hspi->State = HAL_SPI_STATE_BUSY_RX; - /* Call transmit-receive function to send Dummy data on Tx line and generate clock on CLK line */ - return HAL_SPI_TransmitReceive(hspi, pData, pData, Size, Timeout); - } - - /* Process Locked */ - __HAL_LOCK(hspi); - - /* Init tickstart for timeout management*/ - tickstart = HAL_GetTick(); - - if (hspi->State != HAL_SPI_STATE_READY) - { - errorcode = HAL_BUSY; - goto error; - } - - if ((pData == NULL) || (Size == 0U)) - { - errorcode = HAL_ERROR; - goto error; - } - - /* Set the transaction information */ - hspi->State = HAL_SPI_STATE_BUSY_RX; - hspi->ErrorCode = HAL_SPI_ERROR_NONE; - hspi->pRxBuffPtr = (uint8_t *)pData; - hspi->RxXferSize = Size; - hspi->RxXferCount = Size; - - /*Init field not used in handle to zero */ - hspi->pTxBuffPtr = (uint8_t *)NULL; - hspi->TxXferSize = 0U; - hspi->TxXferCount = 0U; - hspi->RxISR = NULL; - hspi->TxISR = NULL; - -#if (USE_SPI_CRC != 0U) - /* Reset CRC Calculation */ - if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) - { - SPI_RESET_CRC(hspi); - /* this is done to handle the CRCNEXT before the latest data */ - hspi->RxXferCount--; - } -#endif /* USE_SPI_CRC */ - - /* Set the Rx Fifo threshold */ - if (hspi->Init.DataSize > SPI_DATASIZE_8BIT) - { - /* Set RX Fifo threshold according the reception data length: 16bit */ - CLEAR_BIT(hspi->Instance->CR2, SPI_RXFIFO_THRESHOLD); - } - else - { - /* Set RX Fifo threshold according the reception data length: 8bit */ - SET_BIT(hspi->Instance->CR2, SPI_RXFIFO_THRESHOLD); - } - - /* Configure communication direction: 1Line */ - if (hspi->Init.Direction == SPI_DIRECTION_1LINE) - { - /* Disable SPI Peripheral before set 1Line direction (BIDIOE bit) */ - __HAL_SPI_DISABLE(hspi); - SPI_1LINE_RX(hspi); - } - - /* Check if the SPI is already enabled */ - if ((hspi->Instance->CR1 & SPI_CR1_SPE) != SPI_CR1_SPE) - { - /* Enable SPI peripheral */ - __HAL_SPI_ENABLE(hspi); - } - - /* Receive data in 8 Bit mode */ - if (hspi->Init.DataSize <= SPI_DATASIZE_8BIT) - { - /* Transfer loop */ - while (hspi->RxXferCount > 0U) - { - /* Check the RXNE flag */ - if (__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_RXNE)) - { - /* read the received data */ - (* (uint8_t *)hspi->pRxBuffPtr) = *(__IO uint8_t *)&hspi->Instance->DR; - hspi->pRxBuffPtr += sizeof(uint8_t); - hspi->RxXferCount--; - } - else - { - /* Timeout management */ - if ((((HAL_GetTick() - tickstart) >= Timeout) && (Timeout != HAL_MAX_DELAY)) || (Timeout == 0U)) - { - errorcode = HAL_TIMEOUT; - goto error; - } - } - } - } - else - { - /* Transfer loop */ - while (hspi->RxXferCount > 0U) - { - /* Check the RXNE flag */ - if (__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_RXNE)) - { - *((uint16_t *)hspi->pRxBuffPtr) = (uint16_t)hspi->Instance->DR; - hspi->pRxBuffPtr += sizeof(uint16_t); - hspi->RxXferCount--; - } - else - { - /* Timeout management */ - if ((((HAL_GetTick() - tickstart) >= Timeout) && (Timeout != HAL_MAX_DELAY)) || (Timeout == 0U)) - { - errorcode = HAL_TIMEOUT; - goto error; - } - } - } - } - -#if (USE_SPI_CRC != 0U) - /* Handle the CRC Transmission */ - if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) - { - /* freeze the CRC before the latest data */ - SET_BIT(hspi->Instance->CR1, SPI_CR1_CRCNEXT); - - /* Read the latest data */ - if (SPI_WaitFlagStateUntilTimeout(hspi, SPI_FLAG_RXNE, SET, Timeout, tickstart) != HAL_OK) - { - /* the latest data has not been received */ - errorcode = HAL_TIMEOUT; - goto error; - } - - /* Receive last data in 16 Bit mode */ - if (hspi->Init.DataSize > SPI_DATASIZE_8BIT) - { - *((uint16_t *)hspi->pRxBuffPtr) = (uint16_t)hspi->Instance->DR; - } - /* Receive last data in 8 Bit mode */ - else - { - (*(uint8_t *)hspi->pRxBuffPtr) = *(__IO uint8_t *)&hspi->Instance->DR; - } - - /* Wait the CRC data */ - if (SPI_WaitFlagStateUntilTimeout(hspi, SPI_FLAG_RXNE, SET, Timeout, tickstart) != HAL_OK) - { - SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_CRC); - errorcode = HAL_TIMEOUT; - goto error; - } - - /* Read CRC to Flush DR and RXNE flag */ - if (hspi->Init.DataSize == SPI_DATASIZE_16BIT) - { - /* Read 16bit CRC */ - tmpreg = READ_REG(hspi->Instance->DR); - /* To avoid GCC warning */ - UNUSED(tmpreg); - } - else - { - /* Initialize the 8bit temporary pointer */ - ptmpreg8 = (__IO uint8_t *)&hspi->Instance->DR; - /* Read 8bit CRC */ - tmpreg8 = *ptmpreg8; - /* To avoid GCC warning */ - UNUSED(tmpreg8); - - if ((hspi->Init.DataSize == SPI_DATASIZE_8BIT) && (hspi->Init.CRCLength == SPI_CRC_LENGTH_16BIT)) - { - if (SPI_WaitFlagStateUntilTimeout(hspi, SPI_FLAG_RXNE, SET, Timeout, tickstart) != HAL_OK) - { - /* Error on the CRC reception */ - SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_CRC); - errorcode = HAL_TIMEOUT; - goto error; - } - /* Read 8bit CRC again in case of 16bit CRC in 8bit Data mode */ - tmpreg8 = *ptmpreg8; - /* To avoid GCC warning */ - UNUSED(tmpreg8); - } - } - } -#endif /* USE_SPI_CRC */ - - /* Check the end of the transaction */ - if (SPI_EndRxTransaction(hspi, Timeout, tickstart) != HAL_OK) - { - hspi->ErrorCode = HAL_SPI_ERROR_FLAG; - } - -#if (USE_SPI_CRC != 0U) - /* Check if CRC error occurred */ - if (__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_CRCERR)) - { - SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_CRC); - __HAL_SPI_CLEAR_CRCERRFLAG(hspi); - } -#endif /* USE_SPI_CRC */ - - if (hspi->ErrorCode != HAL_SPI_ERROR_NONE) - { - errorcode = HAL_ERROR; - } - -error : - hspi->State = HAL_SPI_STATE_READY; - __HAL_UNLOCK(hspi); - return errorcode; -} - -/** - * @brief Transmit and Receive an amount of data in blocking mode. - * @param hspi pointer to a SPI_HandleTypeDef structure that contains - * the configuration information for SPI module. - * @param pTxData pointer to transmission data buffer - * @param pRxData pointer to reception data buffer - * @param Size amount of data to be sent and received - * @param Timeout Timeout duration - * @retval HAL status - */ -HAL_StatusTypeDef HAL_SPI_TransmitReceive(SPI_HandleTypeDef *hspi, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size, - uint32_t Timeout) -{ - uint16_t initial_TxXferCount; - uint16_t initial_RxXferCount; - uint32_t tmp_mode; - HAL_SPI_StateTypeDef tmp_state; - uint32_t tickstart; -#if (USE_SPI_CRC != 0U) - __IO uint32_t tmpreg = 0U; - uint32_t spi_cr1; - uint32_t spi_cr2; - __IO uint8_t *ptmpreg8; - __IO uint8_t tmpreg8 = 0; -#endif /* USE_SPI_CRC */ - - /* Variable used to alternate Rx and Tx during transfer */ - uint32_t txallowed = 1U; - HAL_StatusTypeDef errorcode = HAL_OK; - - /* Check Direction parameter */ - assert_param(IS_SPI_DIRECTION_2LINES(hspi->Init.Direction)); - - /* Process Locked */ - __HAL_LOCK(hspi); - - /* Init tickstart for timeout management*/ - tickstart = HAL_GetTick(); - - /* Init temporary variables */ - tmp_state = hspi->State; - tmp_mode = hspi->Init.Mode; - initial_TxXferCount = Size; - initial_RxXferCount = Size; -#if (USE_SPI_CRC != 0U) - spi_cr1 = READ_REG(hspi->Instance->CR1); - spi_cr2 = READ_REG(hspi->Instance->CR2); -#endif /* USE_SPI_CRC */ - - if (!((tmp_state == HAL_SPI_STATE_READY) || \ - ((tmp_mode == SPI_MODE_MASTER) && (hspi->Init.Direction == SPI_DIRECTION_2LINES) && (tmp_state == HAL_SPI_STATE_BUSY_RX)))) - { - errorcode = HAL_BUSY; - goto error; - } - - if ((pTxData == NULL) || (pRxData == NULL) || (Size == 0U)) - { - errorcode = HAL_ERROR; - goto error; - } - - /* Don't overwrite in case of HAL_SPI_STATE_BUSY_RX */ - if (hspi->State != HAL_SPI_STATE_BUSY_RX) - { - hspi->State = HAL_SPI_STATE_BUSY_TX_RX; - } - - /* Set the transaction information */ - hspi->ErrorCode = HAL_SPI_ERROR_NONE; - hspi->pRxBuffPtr = (uint8_t *)pRxData; - hspi->RxXferCount = Size; - hspi->RxXferSize = Size; - hspi->pTxBuffPtr = (uint8_t *)pTxData; - hspi->TxXferCount = Size; - hspi->TxXferSize = Size; - - /*Init field not used in handle to zero */ - hspi->RxISR = NULL; - hspi->TxISR = NULL; - -#if (USE_SPI_CRC != 0U) - /* Reset CRC Calculation */ - if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) - { - SPI_RESET_CRC(hspi); - } -#endif /* USE_SPI_CRC */ - - /* Set the Rx Fifo threshold */ - if ((hspi->Init.DataSize > SPI_DATASIZE_8BIT) || (initial_RxXferCount > 1U)) - { - /* Set fiforxthreshold according the reception data length: 16bit */ - CLEAR_BIT(hspi->Instance->CR2, SPI_RXFIFO_THRESHOLD); - } - else - { - /* Set fiforxthreshold according the reception data length: 8bit */ - SET_BIT(hspi->Instance->CR2, SPI_RXFIFO_THRESHOLD); - } - - /* Check if the SPI is already enabled */ - if ((hspi->Instance->CR1 & SPI_CR1_SPE) != SPI_CR1_SPE) - { - /* Enable SPI peripheral */ - __HAL_SPI_ENABLE(hspi); - } - - /* Transmit and Receive data in 16 Bit mode */ - if (hspi->Init.DataSize > SPI_DATASIZE_8BIT) - { - if ((hspi->Init.Mode == SPI_MODE_SLAVE) || (initial_TxXferCount == 0x01U)) - { - hspi->Instance->DR = *((uint16_t *)hspi->pTxBuffPtr); - hspi->pTxBuffPtr += sizeof(uint16_t); - hspi->TxXferCount--; - } - while ((hspi->TxXferCount > 0U) || (hspi->RxXferCount > 0U)) - { - /* Check TXE flag */ - if ((__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_TXE)) && (hspi->TxXferCount > 0U) && (txallowed == 1U)) - { - hspi->Instance->DR = *((uint16_t *)hspi->pTxBuffPtr); - hspi->pTxBuffPtr += sizeof(uint16_t); - hspi->TxXferCount--; - /* Next Data is a reception (Rx). Tx not allowed */ - txallowed = 0U; - -#if (USE_SPI_CRC != 0U) - /* Enable CRC Transmission */ - if ((hspi->TxXferCount == 0U) && (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)) - { - /* Set NSS Soft to received correctly the CRC on slave mode with NSS pulse activated */ - if ((READ_BIT(spi_cr1, SPI_CR1_MSTR) == 0U) && (READ_BIT(spi_cr2, SPI_CR2_NSSP) == SPI_CR2_NSSP)) - { - SET_BIT(hspi->Instance->CR1, SPI_CR1_SSM); - } - SET_BIT(hspi->Instance->CR1, SPI_CR1_CRCNEXT); - } -#endif /* USE_SPI_CRC */ - } - - /* Check RXNE flag */ - if ((__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_RXNE)) && (hspi->RxXferCount > 0U)) - { - *((uint16_t *)hspi->pRxBuffPtr) = (uint16_t)hspi->Instance->DR; - hspi->pRxBuffPtr += sizeof(uint16_t); - hspi->RxXferCount--; - /* Next Data is a Transmission (Tx). Tx is allowed */ - txallowed = 1U; - } - if (((HAL_GetTick() - tickstart) >= Timeout) && (Timeout != HAL_MAX_DELAY)) - { - errorcode = HAL_TIMEOUT; - goto error; - } - } - } - /* Transmit and Receive data in 8 Bit mode */ - else - { - if ((hspi->Init.Mode == SPI_MODE_SLAVE) || (initial_TxXferCount == 0x01U)) - { - if (hspi->TxXferCount > 1U) - { - hspi->Instance->DR = *((uint16_t *)hspi->pTxBuffPtr); - hspi->pTxBuffPtr += sizeof(uint16_t); - hspi->TxXferCount -= 2U; - } - else - { - *(__IO uint8_t *)&hspi->Instance->DR = (*hspi->pTxBuffPtr); - hspi->pTxBuffPtr++; - hspi->TxXferCount--; - } - } - while ((hspi->TxXferCount > 0U) || (hspi->RxXferCount > 0U)) - { - /* Check TXE flag */ - if ((__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_TXE)) && (hspi->TxXferCount > 0U) && (txallowed == 1U)) - { - if (hspi->TxXferCount > 1U) - { - hspi->Instance->DR = *((uint16_t *)hspi->pTxBuffPtr); - hspi->pTxBuffPtr += sizeof(uint16_t); - hspi->TxXferCount -= 2U; - } - else - { - *(__IO uint8_t *)&hspi->Instance->DR = (*hspi->pTxBuffPtr); - hspi->pTxBuffPtr++; - hspi->TxXferCount--; - } - /* Next Data is a reception (Rx). Tx not allowed */ - txallowed = 0U; - -#if (USE_SPI_CRC != 0U) - /* Enable CRC Transmission */ - if ((hspi->TxXferCount == 0U) && (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)) - { - /* Set NSS Soft to received correctly the CRC on slave mode with NSS pulse activated */ - if ((READ_BIT(spi_cr1, SPI_CR1_MSTR) == 0U) && (READ_BIT(spi_cr2, SPI_CR2_NSSP) == SPI_CR2_NSSP)) - { - SET_BIT(hspi->Instance->CR1, SPI_CR1_SSM); - } - SET_BIT(hspi->Instance->CR1, SPI_CR1_CRCNEXT); - } -#endif /* USE_SPI_CRC */ - } - - /* Wait until RXNE flag is reset */ - if ((__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_RXNE)) && (hspi->RxXferCount > 0U)) - { - if (hspi->RxXferCount > 1U) - { - *((uint16_t *)hspi->pRxBuffPtr) = (uint16_t)hspi->Instance->DR; - hspi->pRxBuffPtr += sizeof(uint16_t); - hspi->RxXferCount -= 2U; - if (hspi->RxXferCount <= 1U) - { - /* Set RX Fifo threshold before to switch on 8 bit data size */ - SET_BIT(hspi->Instance->CR2, SPI_RXFIFO_THRESHOLD); - } - } - else - { - (*(uint8_t *)hspi->pRxBuffPtr) = *(__IO uint8_t *)&hspi->Instance->DR; - hspi->pRxBuffPtr++; - hspi->RxXferCount--; - } - /* Next Data is a Transmission (Tx). Tx is allowed */ - txallowed = 1U; - } - if ((((HAL_GetTick() - tickstart) >= Timeout) && ((Timeout != HAL_MAX_DELAY))) || (Timeout == 0U)) - { - errorcode = HAL_TIMEOUT; - goto error; - } - } - } - -#if (USE_SPI_CRC != 0U) - /* Read CRC from DR to close CRC calculation process */ - if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) - { - /* Wait until TXE flag */ - if (SPI_WaitFlagStateUntilTimeout(hspi, SPI_FLAG_RXNE, SET, Timeout, tickstart) != HAL_OK) - { - /* Error on the CRC reception */ - SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_CRC); - errorcode = HAL_TIMEOUT; - goto error; - } - /* Read CRC */ - if (hspi->Init.DataSize == SPI_DATASIZE_16BIT) - { - /* Read 16bit CRC */ - tmpreg = READ_REG(hspi->Instance->DR); - /* To avoid GCC warning */ - UNUSED(tmpreg); - } - else - { - /* Initialize the 8bit temporary pointer */ - ptmpreg8 = (__IO uint8_t *)&hspi->Instance->DR; - /* Read 8bit CRC */ - tmpreg8 = *ptmpreg8; - /* To avoid GCC warning */ - UNUSED(tmpreg8); - - if (hspi->Init.CRCLength == SPI_CRC_LENGTH_16BIT) - { - if (SPI_WaitFlagStateUntilTimeout(hspi, SPI_FLAG_RXNE, SET, Timeout, tickstart) != HAL_OK) - { - /* Error on the CRC reception */ - SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_CRC); - errorcode = HAL_TIMEOUT; - goto error; - } - /* Read 8bit CRC again in case of 16bit CRC in 8bit Data mode */ - tmpreg8 = *ptmpreg8; - /* To avoid GCC warning */ - UNUSED(tmpreg8); - } - } - } - - /* Check if CRC error occurred */ - if (__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_CRCERR)) - { - SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_CRC); - /* Clear CRC Flag */ - __HAL_SPI_CLEAR_CRCERRFLAG(hspi); - - errorcode = HAL_ERROR; - } -#endif /* USE_SPI_CRC */ - - /* Check the end of the transaction */ - if (SPI_EndRxTxTransaction(hspi, Timeout, tickstart) != HAL_OK) - { - errorcode = HAL_ERROR; - hspi->ErrorCode = HAL_SPI_ERROR_FLAG; - } - -error : - hspi->State = HAL_SPI_STATE_READY; - __HAL_UNLOCK(hspi); - return errorcode; -} - -/** - * @brief Transmit an amount of data in non-blocking mode with Interrupt. - * @param hspi pointer to a SPI_HandleTypeDef structure that contains - * the configuration information for SPI module. - * @param pData pointer to data buffer - * @param Size amount of data to be sent - * @retval HAL status - */ -HAL_StatusTypeDef HAL_SPI_Transmit_IT(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size) -{ - HAL_StatusTypeDef errorcode = HAL_OK; - - /* Check Direction parameter */ - assert_param(IS_SPI_DIRECTION_2LINES_OR_1LINE(hspi->Init.Direction)); - - /* Process Locked */ - __HAL_LOCK(hspi); - - if ((pData == NULL) || (Size == 0U)) - { - errorcode = HAL_ERROR; - goto error; - } - - if (hspi->State != HAL_SPI_STATE_READY) - { - errorcode = HAL_BUSY; - goto error; - } - - /* Set the transaction information */ - hspi->State = HAL_SPI_STATE_BUSY_TX; - hspi->ErrorCode = HAL_SPI_ERROR_NONE; - hspi->pTxBuffPtr = (uint8_t *)pData; - hspi->TxXferSize = Size; - hspi->TxXferCount = Size; - - /* Init field not used in handle to zero */ - hspi->pRxBuffPtr = (uint8_t *)NULL; - hspi->RxXferSize = 0U; - hspi->RxXferCount = 0U; - hspi->RxISR = NULL; - - /* Set the function for IT treatment */ - if (hspi->Init.DataSize > SPI_DATASIZE_8BIT) - { - hspi->TxISR = SPI_TxISR_16BIT; - } - else - { - hspi->TxISR = SPI_TxISR_8BIT; - } - - /* Configure communication direction : 1Line */ - if (hspi->Init.Direction == SPI_DIRECTION_1LINE) - { - /* Disable SPI Peripheral before set 1Line direction (BIDIOE bit) */ - __HAL_SPI_DISABLE(hspi); - SPI_1LINE_TX(hspi); - } - -#if (USE_SPI_CRC != 0U) - /* Reset CRC Calculation */ - if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) - { - SPI_RESET_CRC(hspi); - } -#endif /* USE_SPI_CRC */ - - /* Enable TXE and ERR interrupt */ - __HAL_SPI_ENABLE_IT(hspi, (SPI_IT_TXE | SPI_IT_ERR)); - - - /* Check if the SPI is already enabled */ - if ((hspi->Instance->CR1 & SPI_CR1_SPE) != SPI_CR1_SPE) - { - /* Enable SPI peripheral */ - __HAL_SPI_ENABLE(hspi); - } - -error : - __HAL_UNLOCK(hspi); - return errorcode; -} - -/** - * @brief Receive an amount of data in non-blocking mode with Interrupt. - * @param hspi pointer to a SPI_HandleTypeDef structure that contains - * the configuration information for SPI module. - * @param pData pointer to data buffer - * @param Size amount of data to be sent - * @retval HAL status - */ -HAL_StatusTypeDef HAL_SPI_Receive_IT(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size) -{ - HAL_StatusTypeDef errorcode = HAL_OK; - - if ((hspi->Init.Direction == SPI_DIRECTION_2LINES) && (hspi->Init.Mode == SPI_MODE_MASTER)) - { - hspi->State = HAL_SPI_STATE_BUSY_RX; - /* Call transmit-receive function to send Dummy data on Tx line and generate clock on CLK line */ - return HAL_SPI_TransmitReceive_IT(hspi, pData, pData, Size); - } - - /* Process Locked */ - __HAL_LOCK(hspi); - - if (hspi->State != HAL_SPI_STATE_READY) - { - errorcode = HAL_BUSY; - goto error; - } - - if ((pData == NULL) || (Size == 0U)) - { - errorcode = HAL_ERROR; - goto error; - } - - /* Set the transaction information */ - hspi->State = HAL_SPI_STATE_BUSY_RX; - hspi->ErrorCode = HAL_SPI_ERROR_NONE; - hspi->pRxBuffPtr = (uint8_t *)pData; - hspi->RxXferSize = Size; - hspi->RxXferCount = Size; - - /* Init field not used in handle to zero */ - hspi->pTxBuffPtr = (uint8_t *)NULL; - hspi->TxXferSize = 0U; - hspi->TxXferCount = 0U; - hspi->TxISR = NULL; - - /* Check the data size to adapt Rx threshold and the set the function for IT treatment */ - if (hspi->Init.DataSize > SPI_DATASIZE_8BIT) - { - /* Set RX Fifo threshold according the reception data length: 16 bit */ - CLEAR_BIT(hspi->Instance->CR2, SPI_RXFIFO_THRESHOLD); - hspi->RxISR = SPI_RxISR_16BIT; - } - else - { - /* Set RX Fifo threshold according the reception data length: 8 bit */ - SET_BIT(hspi->Instance->CR2, SPI_RXFIFO_THRESHOLD); - hspi->RxISR = SPI_RxISR_8BIT; - } - - /* Configure communication direction : 1Line */ - if (hspi->Init.Direction == SPI_DIRECTION_1LINE) - { - /* Disable SPI Peripheral before set 1Line direction (BIDIOE bit) */ - __HAL_SPI_DISABLE(hspi); - SPI_1LINE_RX(hspi); - } - -#if (USE_SPI_CRC != 0U) - /* Reset CRC Calculation */ - if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) - { - hspi->CRCSize = 1U; - if ((hspi->Init.DataSize <= SPI_DATASIZE_8BIT) && (hspi->Init.CRCLength == SPI_CRC_LENGTH_16BIT)) - { - hspi->CRCSize = 2U; - } - SPI_RESET_CRC(hspi); - } - else - { - hspi->CRCSize = 0U; - } -#endif /* USE_SPI_CRC */ - - /* Enable TXE and ERR interrupt */ - __HAL_SPI_ENABLE_IT(hspi, (SPI_IT_RXNE | SPI_IT_ERR)); - - /* Note : The SPI must be enabled after unlocking current process - to avoid the risk of SPI interrupt handle execution before current - process unlock */ - - /* Check if the SPI is already enabled */ - if ((hspi->Instance->CR1 & SPI_CR1_SPE) != SPI_CR1_SPE) - { - /* Enable SPI peripheral */ - __HAL_SPI_ENABLE(hspi); - } - -error : - /* Process Unlocked */ - __HAL_UNLOCK(hspi); - return errorcode; -} - -/** - * @brief Transmit and Receive an amount of data in non-blocking mode with Interrupt. - * @param hspi pointer to a SPI_HandleTypeDef structure that contains - * the configuration information for SPI module. - * @param pTxData pointer to transmission data buffer - * @param pRxData pointer to reception data buffer - * @param Size amount of data to be sent and received - * @retval HAL status - */ -HAL_StatusTypeDef HAL_SPI_TransmitReceive_IT(SPI_HandleTypeDef *hspi, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size) -{ - uint32_t tmp_mode; - HAL_SPI_StateTypeDef tmp_state; - HAL_StatusTypeDef errorcode = HAL_OK; - - /* Check Direction parameter */ - assert_param(IS_SPI_DIRECTION_2LINES(hspi->Init.Direction)); - - /* Process locked */ - __HAL_LOCK(hspi); - - /* Init temporary variables */ - tmp_state = hspi->State; - tmp_mode = hspi->Init.Mode; - - if (!((tmp_state == HAL_SPI_STATE_READY) || \ - ((tmp_mode == SPI_MODE_MASTER) && (hspi->Init.Direction == SPI_DIRECTION_2LINES) && (tmp_state == HAL_SPI_STATE_BUSY_RX)))) - { - errorcode = HAL_BUSY; - goto error; - } - - if ((pTxData == NULL) || (pRxData == NULL) || (Size == 0U)) - { - errorcode = HAL_ERROR; - goto error; - } - - /* Don't overwrite in case of HAL_SPI_STATE_BUSY_RX */ - if (hspi->State != HAL_SPI_STATE_BUSY_RX) - { - hspi->State = HAL_SPI_STATE_BUSY_TX_RX; - } - - /* Set the transaction information */ - hspi->ErrorCode = HAL_SPI_ERROR_NONE; - hspi->pTxBuffPtr = (uint8_t *)pTxData; - hspi->TxXferSize = Size; - hspi->TxXferCount = Size; - hspi->pRxBuffPtr = (uint8_t *)pRxData; - hspi->RxXferSize = Size; - hspi->RxXferCount = Size; - - /* Set the function for IT treatment */ - if (hspi->Init.DataSize > SPI_DATASIZE_8BIT) - { - hspi->RxISR = SPI_2linesRxISR_16BIT; - hspi->TxISR = SPI_2linesTxISR_16BIT; - } - else - { - hspi->RxISR = SPI_2linesRxISR_8BIT; - hspi->TxISR = SPI_2linesTxISR_8BIT; - } - -#if (USE_SPI_CRC != 0U) - /* Reset CRC Calculation */ - if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) - { - hspi->CRCSize = 1U; - if ((hspi->Init.DataSize <= SPI_DATASIZE_8BIT) && (hspi->Init.CRCLength == SPI_CRC_LENGTH_16BIT)) - { - hspi->CRCSize = 2U; - } - SPI_RESET_CRC(hspi); - } - else - { - hspi->CRCSize = 0U; - } -#endif /* USE_SPI_CRC */ - - /* Check if packing mode is enabled and if there is more than 2 data to receive */ - if ((hspi->Init.DataSize > SPI_DATASIZE_8BIT) || (Size >= 2U)) - { - /* Set RX Fifo threshold according the reception data length: 16 bit */ - CLEAR_BIT(hspi->Instance->CR2, SPI_RXFIFO_THRESHOLD); - } - else - { - /* Set RX Fifo threshold according the reception data length: 8 bit */ - SET_BIT(hspi->Instance->CR2, SPI_RXFIFO_THRESHOLD); - } - - /* Enable TXE, RXNE and ERR interrupt */ - __HAL_SPI_ENABLE_IT(hspi, (SPI_IT_TXE | SPI_IT_RXNE | SPI_IT_ERR)); - - /* Check if the SPI is already enabled */ - if ((hspi->Instance->CR1 & SPI_CR1_SPE) != SPI_CR1_SPE) - { - /* Enable SPI peripheral */ - __HAL_SPI_ENABLE(hspi); - } - -error : - /* Process Unlocked */ - __HAL_UNLOCK(hspi); - return errorcode; -} - -/** - * @brief Transmit an amount of data in non-blocking mode with DMA. - * @param hspi pointer to a SPI_HandleTypeDef structure that contains - * the configuration information for SPI module. - * @param pData pointer to data buffer - * @param Size amount of data to be sent - * @retval HAL status - */ -HAL_StatusTypeDef HAL_SPI_Transmit_DMA(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size) -{ - HAL_StatusTypeDef errorcode = HAL_OK; - - /* Check tx dma handle */ - assert_param(IS_SPI_DMA_HANDLE(hspi->hdmatx)); - - /* Check Direction parameter */ - assert_param(IS_SPI_DIRECTION_2LINES_OR_1LINE(hspi->Init.Direction)); - - /* Process Locked */ - __HAL_LOCK(hspi); - - if (hspi->State != HAL_SPI_STATE_READY) - { - errorcode = HAL_BUSY; - goto error; - } - - if ((pData == NULL) || (Size == 0U)) - { - errorcode = HAL_ERROR; - goto error; - } - - /* Set the transaction information */ - hspi->State = HAL_SPI_STATE_BUSY_TX; - hspi->ErrorCode = HAL_SPI_ERROR_NONE; - hspi->pTxBuffPtr = (uint8_t *)pData; - hspi->TxXferSize = Size; - hspi->TxXferCount = Size; - - /* Init field not used in handle to zero */ - hspi->pRxBuffPtr = (uint8_t *)NULL; - hspi->TxISR = NULL; - hspi->RxISR = NULL; - hspi->RxXferSize = 0U; - hspi->RxXferCount = 0U; - - /* Configure communication direction : 1Line */ - if (hspi->Init.Direction == SPI_DIRECTION_1LINE) - { - /* Disable SPI Peripheral before set 1Line direction (BIDIOE bit) */ - __HAL_SPI_DISABLE(hspi); - SPI_1LINE_TX(hspi); - } - -#if (USE_SPI_CRC != 0U) - /* Reset CRC Calculation */ - if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) - { - SPI_RESET_CRC(hspi); - } -#endif /* USE_SPI_CRC */ - - /* Set the SPI TxDMA Half transfer complete callback */ - hspi->hdmatx->XferHalfCpltCallback = SPI_DMAHalfTransmitCplt; - - /* Set the SPI TxDMA transfer complete callback */ - hspi->hdmatx->XferCpltCallback = SPI_DMATransmitCplt; - - /* Set the DMA error callback */ - hspi->hdmatx->XferErrorCallback = SPI_DMAError; - - /* Set the DMA AbortCpltCallback */ - hspi->hdmatx->XferAbortCallback = NULL; - - CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_LDMATX); - /* Packing mode is enabled only if the DMA setting is HALWORD */ - if ((hspi->Init.DataSize <= SPI_DATASIZE_8BIT) && (hspi->hdmatx->Init.MemDataAlignment == DMA_MDATAALIGN_HALFWORD)) - { - /* Check the even/odd of the data size + crc if enabled */ - if ((hspi->TxXferCount & 0x1U) == 0U) - { - CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_LDMATX); - hspi->TxXferCount = (hspi->TxXferCount >> 1U); - } - else - { - SET_BIT(hspi->Instance->CR2, SPI_CR2_LDMATX); - hspi->TxXferCount = (hspi->TxXferCount >> 1U) + 1U; - } - } - - /* Enable the Tx DMA Stream/Channel */ - if (HAL_OK != HAL_DMA_Start_IT(hspi->hdmatx, (uint32_t)hspi->pTxBuffPtr, (uint32_t)&hspi->Instance->DR, - hspi->TxXferCount)) - { - /* Update SPI error code */ - SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_DMA); - errorcode = HAL_ERROR; - - hspi->State = HAL_SPI_STATE_READY; - goto error; - } - - /* Check if the SPI is already enabled */ - if ((hspi->Instance->CR1 & SPI_CR1_SPE) != SPI_CR1_SPE) - { - /* Enable SPI peripheral */ - __HAL_SPI_ENABLE(hspi); - } - - /* Enable the SPI Error Interrupt Bit */ - __HAL_SPI_ENABLE_IT(hspi, (SPI_IT_ERR)); - - /* Enable Tx DMA Request */ - SET_BIT(hspi->Instance->CR2, SPI_CR2_TXDMAEN); - -error : - /* Process Unlocked */ - __HAL_UNLOCK(hspi); - return errorcode; -} - -/** - * @brief Receive an amount of data in non-blocking mode with DMA. - * @note In case of MASTER mode and SPI_DIRECTION_2LINES direction, hdmatx shall be defined. - * @param hspi pointer to a SPI_HandleTypeDef structure that contains - * the configuration information for SPI module. - * @param pData pointer to data buffer - * @note When the CRC feature is enabled the pData Length must be Size + 1. - * @param Size amount of data to be sent - * @retval HAL status - */ -HAL_StatusTypeDef HAL_SPI_Receive_DMA(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size) -{ - HAL_StatusTypeDef errorcode = HAL_OK; - - /* Check rx dma handle */ - assert_param(IS_SPI_DMA_HANDLE(hspi->hdmarx)); - - if ((hspi->Init.Direction == SPI_DIRECTION_2LINES) && (hspi->Init.Mode == SPI_MODE_MASTER)) - { - hspi->State = HAL_SPI_STATE_BUSY_RX; - - /* Check tx dma handle */ - assert_param(IS_SPI_DMA_HANDLE(hspi->hdmatx)); - - /* Call transmit-receive function to send Dummy data on Tx line and generate clock on CLK line */ - return HAL_SPI_TransmitReceive_DMA(hspi, pData, pData, Size); - } - - /* Process Locked */ - __HAL_LOCK(hspi); - - if (hspi->State != HAL_SPI_STATE_READY) - { - errorcode = HAL_BUSY; - goto error; - } - - if ((pData == NULL) || (Size == 0U)) - { - errorcode = HAL_ERROR; - goto error; - } - - /* Set the transaction information */ - hspi->State = HAL_SPI_STATE_BUSY_RX; - hspi->ErrorCode = HAL_SPI_ERROR_NONE; - hspi->pRxBuffPtr = (uint8_t *)pData; - hspi->RxXferSize = Size; - hspi->RxXferCount = Size; - - /*Init field not used in handle to zero */ - hspi->RxISR = NULL; - hspi->TxISR = NULL; - hspi->TxXferSize = 0U; - hspi->TxXferCount = 0U; - - /* Configure communication direction : 1Line */ - if (hspi->Init.Direction == SPI_DIRECTION_1LINE) - { - /* Disable SPI Peripheral before set 1Line direction (BIDIOE bit) */ - __HAL_SPI_DISABLE(hspi); - SPI_1LINE_RX(hspi); - } - -#if (USE_SPI_CRC != 0U) - /* Reset CRC Calculation */ - if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) - { - SPI_RESET_CRC(hspi); - } -#endif /* USE_SPI_CRC */ - - - CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_LDMARX); - if (hspi->Init.DataSize > SPI_DATASIZE_8BIT) - { - /* Set RX Fifo threshold according the reception data length: 16bit */ - CLEAR_BIT(hspi->Instance->CR2, SPI_RXFIFO_THRESHOLD); - } - else - { - /* Set RX Fifo threshold according the reception data length: 8bit */ - SET_BIT(hspi->Instance->CR2, SPI_RXFIFO_THRESHOLD); - - if (hspi->hdmarx->Init.MemDataAlignment == DMA_MDATAALIGN_HALFWORD) - { - /* Set RX Fifo threshold according the reception data length: 16bit */ - CLEAR_BIT(hspi->Instance->CR2, SPI_RXFIFO_THRESHOLD); - - if ((hspi->RxXferCount & 0x1U) == 0x0U) - { - CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_LDMARX); - hspi->RxXferCount = hspi->RxXferCount >> 1U; - } - else - { - SET_BIT(hspi->Instance->CR2, SPI_CR2_LDMARX); - hspi->RxXferCount = (hspi->RxXferCount >> 1U) + 1U; - } - } - } - - /* Set the SPI RxDMA Half transfer complete callback */ - hspi->hdmarx->XferHalfCpltCallback = SPI_DMAHalfReceiveCplt; - - /* Set the SPI Rx DMA transfer complete callback */ - hspi->hdmarx->XferCpltCallback = SPI_DMAReceiveCplt; - - /* Set the DMA error callback */ - hspi->hdmarx->XferErrorCallback = SPI_DMAError; - - /* Set the DMA AbortCpltCallback */ - hspi->hdmarx->XferAbortCallback = NULL; - - /* Enable the Rx DMA Stream/Channel */ - if (HAL_OK != HAL_DMA_Start_IT(hspi->hdmarx, (uint32_t)&hspi->Instance->DR, (uint32_t)hspi->pRxBuffPtr, - hspi->RxXferCount)) - { - /* Update SPI error code */ - SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_DMA); - errorcode = HAL_ERROR; - - hspi->State = HAL_SPI_STATE_READY; - goto error; - } - - /* Check if the SPI is already enabled */ - if ((hspi->Instance->CR1 & SPI_CR1_SPE) != SPI_CR1_SPE) - { - /* Enable SPI peripheral */ - __HAL_SPI_ENABLE(hspi); - } - - /* Enable the SPI Error Interrupt Bit */ - __HAL_SPI_ENABLE_IT(hspi, (SPI_IT_ERR)); - - /* Enable Rx DMA Request */ - SET_BIT(hspi->Instance->CR2, SPI_CR2_RXDMAEN); - -error: - /* Process Unlocked */ - __HAL_UNLOCK(hspi); - return errorcode; -} - -/** - * @brief Transmit and Receive an amount of data in non-blocking mode with DMA. - * @param hspi pointer to a SPI_HandleTypeDef structure that contains - * the configuration information for SPI module. - * @param pTxData pointer to transmission data buffer - * @param pRxData pointer to reception data buffer - * @note When the CRC feature is enabled the pRxData Length must be Size + 1 - * @param Size amount of data to be sent - * @retval HAL status - */ -HAL_StatusTypeDef HAL_SPI_TransmitReceive_DMA(SPI_HandleTypeDef *hspi, uint8_t *pTxData, uint8_t *pRxData, - uint16_t Size) -{ - uint32_t tmp_mode; - HAL_SPI_StateTypeDef tmp_state; - HAL_StatusTypeDef errorcode = HAL_OK; - - /* Check rx & tx dma handles */ - assert_param(IS_SPI_DMA_HANDLE(hspi->hdmarx)); - assert_param(IS_SPI_DMA_HANDLE(hspi->hdmatx)); - - /* Check Direction parameter */ - assert_param(IS_SPI_DIRECTION_2LINES(hspi->Init.Direction)); - - /* Process locked */ - __HAL_LOCK(hspi); - - /* Init temporary variables */ - tmp_state = hspi->State; - tmp_mode = hspi->Init.Mode; - - if (!((tmp_state == HAL_SPI_STATE_READY) || - ((tmp_mode == SPI_MODE_MASTER) && (hspi->Init.Direction == SPI_DIRECTION_2LINES) && (tmp_state == HAL_SPI_STATE_BUSY_RX)))) - { - errorcode = HAL_BUSY; - goto error; - } - - if ((pTxData == NULL) || (pRxData == NULL) || (Size == 0U)) - { - errorcode = HAL_ERROR; - goto error; - } - - /* Don't overwrite in case of HAL_SPI_STATE_BUSY_RX */ - if (hspi->State != HAL_SPI_STATE_BUSY_RX) - { - hspi->State = HAL_SPI_STATE_BUSY_TX_RX; - } - - /* Set the transaction information */ - hspi->ErrorCode = HAL_SPI_ERROR_NONE; - hspi->pTxBuffPtr = (uint8_t *)pTxData; - hspi->TxXferSize = Size; - hspi->TxXferCount = Size; - hspi->pRxBuffPtr = (uint8_t *)pRxData; - hspi->RxXferSize = Size; - hspi->RxXferCount = Size; - - /* Init field not used in handle to zero */ - hspi->RxISR = NULL; - hspi->TxISR = NULL; - -#if (USE_SPI_CRC != 0U) - /* Reset CRC Calculation */ - if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) - { - SPI_RESET_CRC(hspi); - } -#endif /* USE_SPI_CRC */ - - /* Reset the threshold bit */ - CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_LDMATX | SPI_CR2_LDMARX); - - /* The packing mode management is enabled by the DMA settings according the spi data size */ - if (hspi->Init.DataSize > SPI_DATASIZE_8BIT) - { - /* Set fiforxthreshold according the reception data length: 16bit */ - CLEAR_BIT(hspi->Instance->CR2, SPI_RXFIFO_THRESHOLD); - } - else - { - /* Set RX Fifo threshold according the reception data length: 8bit */ - SET_BIT(hspi->Instance->CR2, SPI_RXFIFO_THRESHOLD); - - if (hspi->hdmatx->Init.MemDataAlignment == DMA_MDATAALIGN_HALFWORD) - { - if ((hspi->TxXferSize & 0x1U) == 0x0U) - { - CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_LDMATX); - hspi->TxXferCount = hspi->TxXferCount >> 1U; - } - else - { - SET_BIT(hspi->Instance->CR2, SPI_CR2_LDMATX); - hspi->TxXferCount = (hspi->TxXferCount >> 1U) + 1U; - } - } - - if (hspi->hdmarx->Init.MemDataAlignment == DMA_MDATAALIGN_HALFWORD) - { - /* Set RX Fifo threshold according the reception data length: 16bit */ - CLEAR_BIT(hspi->Instance->CR2, SPI_RXFIFO_THRESHOLD); - - if ((hspi->RxXferCount & 0x1U) == 0x0U) - { - CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_LDMARX); - hspi->RxXferCount = hspi->RxXferCount >> 1U; - } - else - { - SET_BIT(hspi->Instance->CR2, SPI_CR2_LDMARX); - hspi->RxXferCount = (hspi->RxXferCount >> 1U) + 1U; - } - } - } - - /* Check if we are in Rx only or in Rx/Tx Mode and configure the DMA transfer complete callback */ - if (hspi->State == HAL_SPI_STATE_BUSY_RX) - { - /* Set the SPI Rx DMA Half transfer complete callback */ - hspi->hdmarx->XferHalfCpltCallback = SPI_DMAHalfReceiveCplt; - hspi->hdmarx->XferCpltCallback = SPI_DMAReceiveCplt; - } - else - { - /* Set the SPI Tx/Rx DMA Half transfer complete callback */ - hspi->hdmarx->XferHalfCpltCallback = SPI_DMAHalfTransmitReceiveCplt; - hspi->hdmarx->XferCpltCallback = SPI_DMATransmitReceiveCplt; - } - - /* Set the DMA error callback */ - hspi->hdmarx->XferErrorCallback = SPI_DMAError; - - /* Set the DMA AbortCpltCallback */ - hspi->hdmarx->XferAbortCallback = NULL; - - /* Enable the Rx DMA Stream/Channel */ - if (HAL_OK != HAL_DMA_Start_IT(hspi->hdmarx, (uint32_t)&hspi->Instance->DR, (uint32_t)hspi->pRxBuffPtr, - hspi->RxXferCount)) - { - /* Update SPI error code */ - SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_DMA); - errorcode = HAL_ERROR; - - hspi->State = HAL_SPI_STATE_READY; - goto error; - } - - /* Enable Rx DMA Request */ - SET_BIT(hspi->Instance->CR2, SPI_CR2_RXDMAEN); - - /* Set the SPI Tx DMA transfer complete callback as NULL because the communication closing - is performed in DMA reception complete callback */ - hspi->hdmatx->XferHalfCpltCallback = NULL; - hspi->hdmatx->XferCpltCallback = NULL; - hspi->hdmatx->XferErrorCallback = NULL; - hspi->hdmatx->XferAbortCallback = NULL; - - /* Enable the Tx DMA Stream/Channel */ - if (HAL_OK != HAL_DMA_Start_IT(hspi->hdmatx, (uint32_t)hspi->pTxBuffPtr, (uint32_t)&hspi->Instance->DR, - hspi->TxXferCount)) - { - /* Update SPI error code */ - SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_DMA); - errorcode = HAL_ERROR; - - hspi->State = HAL_SPI_STATE_READY; - goto error; - } - - /* Check if the SPI is already enabled */ - if ((hspi->Instance->CR1 & SPI_CR1_SPE) != SPI_CR1_SPE) - { - /* Enable SPI peripheral */ - __HAL_SPI_ENABLE(hspi); - } - /* Enable the SPI Error Interrupt Bit */ - __HAL_SPI_ENABLE_IT(hspi, (SPI_IT_ERR)); - - /* Enable Tx DMA Request */ - SET_BIT(hspi->Instance->CR2, SPI_CR2_TXDMAEN); - -error : - /* Process Unlocked */ - __HAL_UNLOCK(hspi); - return errorcode; -} - -/** - * @brief Abort ongoing transfer (blocking mode). - * @param hspi SPI handle. - * @note This procedure could be used for aborting any ongoing transfer (Tx and Rx), - * started in Interrupt or DMA mode. - * This procedure performs following operations : - * - Disable SPI Interrupts (depending of transfer direction) - * - Disable the DMA transfer in the peripheral register (if enabled) - * - Abort DMA transfer by calling HAL_DMA_Abort (in case of transfer in DMA mode) - * - Set handle State to READY - * @note This procedure is executed in blocking mode : when exiting function, Abort is considered as completed. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_SPI_Abort(SPI_HandleTypeDef *hspi) -{ - HAL_StatusTypeDef errorcode; - __IO uint32_t count; - __IO uint32_t resetcount; - - /* Initialized local variable */ - errorcode = HAL_OK; - resetcount = SPI_DEFAULT_TIMEOUT * (SystemCoreClock / 24U / 1000U); - count = resetcount; - - /* Clear ERRIE interrupt to avoid error interrupts generation during Abort procedure */ - CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_ERRIE); - - /* Disable TXEIE, RXNEIE and ERRIE(mode fault event, overrun error, TI frame error) interrupts */ - if (HAL_IS_BIT_SET(hspi->Instance->CR2, SPI_CR2_TXEIE)) - { - hspi->TxISR = SPI_AbortTx_ISR; - /* Wait HAL_SPI_STATE_ABORT state */ - do - { - if (count == 0U) - { - SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_ABORT); - break; - } - count--; - } while (hspi->State != HAL_SPI_STATE_ABORT); - /* Reset Timeout Counter */ - count = resetcount; - } - - if (HAL_IS_BIT_SET(hspi->Instance->CR2, SPI_CR2_RXNEIE)) - { - hspi->RxISR = SPI_AbortRx_ISR; - /* Wait HAL_SPI_STATE_ABORT state */ - do - { - if (count == 0U) - { - SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_ABORT); - break; - } - count--; - } while (hspi->State != HAL_SPI_STATE_ABORT); - /* Reset Timeout Counter */ - count = resetcount; - } - - /* Disable the SPI DMA Tx request if enabled */ - if (HAL_IS_BIT_SET(hspi->Instance->CR2, SPI_CR2_TXDMAEN)) - { - /* Abort the SPI DMA Tx Stream/Channel : use blocking DMA Abort API (no callback) */ - if (hspi->hdmatx != NULL) - { - /* Set the SPI DMA Abort callback : - will lead to call HAL_SPI_AbortCpltCallback() at end of DMA abort procedure */ - hspi->hdmatx->XferAbortCallback = NULL; - - /* Abort DMA Tx Handle linked to SPI Peripheral */ - if (HAL_DMA_Abort(hspi->hdmatx) != HAL_OK) - { - hspi->ErrorCode = HAL_SPI_ERROR_ABORT; - } - - /* Disable Tx DMA Request */ - CLEAR_BIT(hspi->Instance->CR2, (SPI_CR2_TXDMAEN)); - - if (SPI_EndRxTxTransaction(hspi, SPI_DEFAULT_TIMEOUT, HAL_GetTick()) != HAL_OK) - { - hspi->ErrorCode = HAL_SPI_ERROR_ABORT; - } - - /* Disable SPI Peripheral */ - __HAL_SPI_DISABLE(hspi); - - /* Empty the FRLVL fifo */ - if (SPI_WaitFifoStateUntilTimeout(hspi, SPI_FLAG_FRLVL, SPI_FRLVL_EMPTY, SPI_DEFAULT_TIMEOUT, HAL_GetTick()) != HAL_OK) - { - hspi->ErrorCode = HAL_SPI_ERROR_ABORT; - } - } - } - - /* Disable the SPI DMA Rx request if enabled */ - if (HAL_IS_BIT_SET(hspi->Instance->CR2, SPI_CR2_RXDMAEN)) - { - /* Abort the SPI DMA Rx Stream/Channel : use blocking DMA Abort API (no callback) */ - if (hspi->hdmarx != NULL) - { - /* Set the SPI DMA Abort callback : - will lead to call HAL_SPI_AbortCpltCallback() at end of DMA abort procedure */ - hspi->hdmarx->XferAbortCallback = NULL; - - /* Abort DMA Rx Handle linked to SPI Peripheral */ - if (HAL_DMA_Abort(hspi->hdmarx) != HAL_OK) - { - hspi->ErrorCode = HAL_SPI_ERROR_ABORT; - } - - /* Disable peripheral */ - __HAL_SPI_DISABLE(hspi); - - /* Control the BSY flag */ - if (SPI_WaitFlagStateUntilTimeout(hspi, SPI_FLAG_BSY, RESET, SPI_DEFAULT_TIMEOUT, HAL_GetTick()) != HAL_OK) - { - hspi->ErrorCode = HAL_SPI_ERROR_ABORT; - } - - /* Empty the FRLVL fifo */ - if (SPI_WaitFifoStateUntilTimeout(hspi, SPI_FLAG_FRLVL, SPI_FRLVL_EMPTY, SPI_DEFAULT_TIMEOUT, HAL_GetTick()) != HAL_OK) - { - hspi->ErrorCode = HAL_SPI_ERROR_ABORT; - } - - /* Disable Rx DMA Request */ - CLEAR_BIT(hspi->Instance->CR2, (SPI_CR2_RXDMAEN)); - } - } - /* Reset Tx and Rx transfer counters */ - hspi->RxXferCount = 0U; - hspi->TxXferCount = 0U; - - /* Check error during Abort procedure */ - if (hspi->ErrorCode == HAL_SPI_ERROR_ABORT) - { - /* return HAL_Error in case of error during Abort procedure */ - errorcode = HAL_ERROR; - } - else - { - /* Reset errorCode */ - hspi->ErrorCode = HAL_SPI_ERROR_NONE; - } - - /* Clear the Error flags in the SR register */ - __HAL_SPI_CLEAR_OVRFLAG(hspi); - __HAL_SPI_CLEAR_FREFLAG(hspi); - - /* Restore hspi->state to ready */ - hspi->State = HAL_SPI_STATE_READY; - - return errorcode; -} - -/** - * @brief Abort ongoing transfer (Interrupt mode). - * @param hspi SPI handle. - * @note This procedure could be used for aborting any ongoing transfer (Tx and Rx), - * started in Interrupt or DMA mode. - * This procedure performs following operations : - * - Disable SPI Interrupts (depending of transfer direction) - * - Disable the DMA transfer in the peripheral register (if enabled) - * - Abort DMA transfer by calling HAL_DMA_Abort_IT (in case of transfer in DMA mode) - * - Set handle State to READY - * - At abort completion, call user abort complete callback - * @note This procedure is executed in Interrupt mode, meaning that abort procedure could be - * considered as completed only when user abort complete callback is executed (not when exiting function). - * @retval HAL status - */ -HAL_StatusTypeDef HAL_SPI_Abort_IT(SPI_HandleTypeDef *hspi) -{ - HAL_StatusTypeDef errorcode; - uint32_t abortcplt ; - __IO uint32_t count; - __IO uint32_t resetcount; - - /* Initialized local variable */ - errorcode = HAL_OK; - abortcplt = 1U; - resetcount = SPI_DEFAULT_TIMEOUT * (SystemCoreClock / 24U / 1000U); - count = resetcount; - - /* Clear ERRIE interrupt to avoid error interrupts generation during Abort procedure */ - CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_ERRIE); - - /* Change Rx and Tx Irq Handler to Disable TXEIE, RXNEIE and ERRIE interrupts */ - if (HAL_IS_BIT_SET(hspi->Instance->CR2, SPI_CR2_TXEIE)) - { - hspi->TxISR = SPI_AbortTx_ISR; - /* Wait HAL_SPI_STATE_ABORT state */ - do - { - if (count == 0U) - { - SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_ABORT); - break; - } - count--; - } while (hspi->State != HAL_SPI_STATE_ABORT); - /* Reset Timeout Counter */ - count = resetcount; - } - - if (HAL_IS_BIT_SET(hspi->Instance->CR2, SPI_CR2_RXNEIE)) - { - hspi->RxISR = SPI_AbortRx_ISR; - /* Wait HAL_SPI_STATE_ABORT state */ - do - { - if (count == 0U) - { - SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_ABORT); - break; - } - count--; - } while (hspi->State != HAL_SPI_STATE_ABORT); - /* Reset Timeout Counter */ - count = resetcount; - } - - /* If DMA Tx and/or DMA Rx Handles are associated to SPI Handle, DMA Abort complete callbacks should be initialised - before any call to DMA Abort functions */ - /* DMA Tx Handle is valid */ - if (hspi->hdmatx != NULL) - { - /* Set DMA Abort Complete callback if UART DMA Tx request if enabled. - Otherwise, set it to NULL */ - if (HAL_IS_BIT_SET(hspi->Instance->CR2, SPI_CR2_TXDMAEN)) - { - hspi->hdmatx->XferAbortCallback = SPI_DMATxAbortCallback; - } - else - { - hspi->hdmatx->XferAbortCallback = NULL; - } - } - /* DMA Rx Handle is valid */ - if (hspi->hdmarx != NULL) - { - /* Set DMA Abort Complete callback if UART DMA Rx request if enabled. - Otherwise, set it to NULL */ - if (HAL_IS_BIT_SET(hspi->Instance->CR2, SPI_CR2_RXDMAEN)) - { - hspi->hdmarx->XferAbortCallback = SPI_DMARxAbortCallback; - } - else - { - hspi->hdmarx->XferAbortCallback = NULL; - } - } - - /* Disable the SPI DMA Tx request if enabled */ - if (HAL_IS_BIT_SET(hspi->Instance->CR2, SPI_CR2_TXDMAEN)) - { - /* Abort the SPI DMA Tx Stream/Channel */ - if (hspi->hdmatx != NULL) - { - /* Abort DMA Tx Handle linked to SPI Peripheral */ - if (HAL_DMA_Abort_IT(hspi->hdmatx) != HAL_OK) - { - hspi->hdmatx->XferAbortCallback = NULL; - hspi->ErrorCode = HAL_SPI_ERROR_ABORT; - } - else - { - abortcplt = 0U; - } - } - } - /* Disable the SPI DMA Rx request if enabled */ - if (HAL_IS_BIT_SET(hspi->Instance->CR2, SPI_CR2_RXDMAEN)) - { - /* Abort the SPI DMA Rx Stream/Channel */ - if (hspi->hdmarx != NULL) - { - /* Abort DMA Rx Handle linked to SPI Peripheral */ - if (HAL_DMA_Abort_IT(hspi->hdmarx) != HAL_OK) - { - hspi->hdmarx->XferAbortCallback = NULL; - hspi->ErrorCode = HAL_SPI_ERROR_ABORT; - } - else - { - abortcplt = 0U; - } - } - } - - if (abortcplt == 1U) - { - /* Reset Tx and Rx transfer counters */ - hspi->RxXferCount = 0U; - hspi->TxXferCount = 0U; - - /* Check error during Abort procedure */ - if (hspi->ErrorCode == HAL_SPI_ERROR_ABORT) - { - /* return HAL_Error in case of error during Abort procedure */ - errorcode = HAL_ERROR; - } - else - { - /* Reset errorCode */ - hspi->ErrorCode = HAL_SPI_ERROR_NONE; - } - - /* Clear the Error flags in the SR register */ - __HAL_SPI_CLEAR_OVRFLAG(hspi); - __HAL_SPI_CLEAR_FREFLAG(hspi); - - /* Restore hspi->State to Ready */ - hspi->State = HAL_SPI_STATE_READY; - - /* As no DMA to be aborted, call directly user Abort complete callback */ -#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) - hspi->AbortCpltCallback(hspi); -#else - HAL_SPI_AbortCpltCallback(hspi); -#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ - } - - return errorcode; -} - -/** - * @brief Pause the DMA Transfer. - * @param hspi pointer to a SPI_HandleTypeDef structure that contains - * the configuration information for the specified SPI module. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_SPI_DMAPause(SPI_HandleTypeDef *hspi) -{ - /* Process Locked */ - __HAL_LOCK(hspi); - - /* Disable the SPI DMA Tx & Rx requests */ - CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_TXDMAEN | SPI_CR2_RXDMAEN); - - /* Process Unlocked */ - __HAL_UNLOCK(hspi); - - return HAL_OK; -} - -/** - * @brief Resume the DMA Transfer. - * @param hspi pointer to a SPI_HandleTypeDef structure that contains - * the configuration information for the specified SPI module. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_SPI_DMAResume(SPI_HandleTypeDef *hspi) -{ - /* Process Locked */ - __HAL_LOCK(hspi); - - /* Enable the SPI DMA Tx & Rx requests */ - SET_BIT(hspi->Instance->CR2, SPI_CR2_TXDMAEN | SPI_CR2_RXDMAEN); - - /* Process Unlocked */ - __HAL_UNLOCK(hspi); - - return HAL_OK; -} - -/** - * @brief Stop the DMA Transfer. - * @param hspi pointer to a SPI_HandleTypeDef structure that contains - * the configuration information for the specified SPI module. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_SPI_DMAStop(SPI_HandleTypeDef *hspi) -{ - HAL_StatusTypeDef errorcode = HAL_OK; - /* The Lock is not implemented on this API to allow the user application - to call the HAL SPI API under callbacks HAL_SPI_TxCpltCallback() or HAL_SPI_RxCpltCallback() or HAL_SPI_TxRxCpltCallback(): - when calling HAL_DMA_Abort() API the DMA TX/RX Transfer complete interrupt is generated - and the correspond call back is executed HAL_SPI_TxCpltCallback() or HAL_SPI_RxCpltCallback() or HAL_SPI_TxRxCpltCallback() - */ - - /* Abort the SPI DMA tx Stream/Channel */ - if (hspi->hdmatx != NULL) - { - if (HAL_OK != HAL_DMA_Abort(hspi->hdmatx)) - { - SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_DMA); - errorcode = HAL_ERROR; - } - } - /* Abort the SPI DMA rx Stream/Channel */ - if (hspi->hdmarx != NULL) - { - if (HAL_OK != HAL_DMA_Abort(hspi->hdmarx)) - { - SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_DMA); - errorcode = HAL_ERROR; - } - } - - /* Disable the SPI DMA Tx & Rx requests */ - CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_TXDMAEN | SPI_CR2_RXDMAEN); - hspi->State = HAL_SPI_STATE_READY; - return errorcode; -} - -/** - * @brief Handle SPI interrupt request. - * @param hspi pointer to a SPI_HandleTypeDef structure that contains - * the configuration information for the specified SPI module. - * @retval None - */ -void HAL_SPI_IRQHandler(SPI_HandleTypeDef *hspi) -{ - uint32_t itsource = hspi->Instance->CR2; - uint32_t itflag = hspi->Instance->SR; - - /* SPI in mode Receiver ----------------------------------------------------*/ - if ((SPI_CHECK_FLAG(itflag, SPI_FLAG_OVR) == RESET) && - (SPI_CHECK_FLAG(itflag, SPI_FLAG_RXNE) != RESET) && (SPI_CHECK_IT_SOURCE(itsource, SPI_IT_RXNE) != RESET)) - { - hspi->RxISR(hspi); - return; - } - - /* SPI in mode Transmitter -------------------------------------------------*/ - if ((SPI_CHECK_FLAG(itflag, SPI_FLAG_TXE) != RESET) && (SPI_CHECK_IT_SOURCE(itsource, SPI_IT_TXE) != RESET)) - { - hspi->TxISR(hspi); - return; - } - - /* SPI in Error Treatment --------------------------------------------------*/ - if (((SPI_CHECK_FLAG(itflag, SPI_FLAG_MODF) != RESET) || (SPI_CHECK_FLAG(itflag, SPI_FLAG_OVR) != RESET) - || (SPI_CHECK_FLAG(itflag, SPI_FLAG_FRE) != RESET)) && (SPI_CHECK_IT_SOURCE(itsource, SPI_IT_ERR) != RESET)) - { - /* SPI Overrun error interrupt occurred ----------------------------------*/ - if (SPI_CHECK_FLAG(itflag, SPI_FLAG_OVR) != RESET) - { - if (hspi->State != HAL_SPI_STATE_BUSY_TX) - { - SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_OVR); - __HAL_SPI_CLEAR_OVRFLAG(hspi); - } - else - { - __HAL_SPI_CLEAR_OVRFLAG(hspi); - return; - } - } - - /* SPI Mode Fault error interrupt occurred -------------------------------*/ - if (SPI_CHECK_FLAG(itflag, SPI_FLAG_MODF) != RESET) - { - SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_MODF); - __HAL_SPI_CLEAR_MODFFLAG(hspi); - } - - /* SPI Frame error interrupt occurred ------------------------------------*/ - if (SPI_CHECK_FLAG(itflag, SPI_FLAG_FRE) != RESET) - { - SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_FRE); - __HAL_SPI_CLEAR_FREFLAG(hspi); - } - - if (hspi->ErrorCode != HAL_SPI_ERROR_NONE) - { - /* Disable all interrupts */ - __HAL_SPI_DISABLE_IT(hspi, SPI_IT_RXNE | SPI_IT_TXE | SPI_IT_ERR); - - hspi->State = HAL_SPI_STATE_READY; - /* Disable the SPI DMA requests if enabled */ - if ((HAL_IS_BIT_SET(itsource, SPI_CR2_TXDMAEN)) || (HAL_IS_BIT_SET(itsource, SPI_CR2_RXDMAEN))) - { - CLEAR_BIT(hspi->Instance->CR2, (SPI_CR2_TXDMAEN | SPI_CR2_RXDMAEN)); - - /* Abort the SPI DMA Rx channel */ - if (hspi->hdmarx != NULL) - { - /* Set the SPI DMA Abort callback : - will lead to call HAL_SPI_ErrorCallback() at end of DMA abort procedure */ - hspi->hdmarx->XferAbortCallback = SPI_DMAAbortOnError; - if (HAL_OK != HAL_DMA_Abort_IT(hspi->hdmarx)) - { - SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_ABORT); - } - } - /* Abort the SPI DMA Tx channel */ - if (hspi->hdmatx != NULL) - { - /* Set the SPI DMA Abort callback : - will lead to call HAL_SPI_ErrorCallback() at end of DMA abort procedure */ - hspi->hdmatx->XferAbortCallback = SPI_DMAAbortOnError; - if (HAL_OK != HAL_DMA_Abort_IT(hspi->hdmatx)) - { - SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_ABORT); - } - } - } - else - { - /* Call user error callback */ -#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) - hspi->ErrorCallback(hspi); -#else - HAL_SPI_ErrorCallback(hspi); -#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ - } - } - return; - } -} - -/** - * @brief Tx Transfer completed callback. - * @param hspi pointer to a SPI_HandleTypeDef structure that contains - * the configuration information for SPI module. - * @retval None - */ -__weak void HAL_SPI_TxCpltCallback(SPI_HandleTypeDef *hspi) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hspi); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_SPI_TxCpltCallback should be implemented in the user file - */ -} - -/** - * @brief Rx Transfer completed callback. - * @param hspi pointer to a SPI_HandleTypeDef structure that contains - * the configuration information for SPI module. - * @retval None - */ -__weak void HAL_SPI_RxCpltCallback(SPI_HandleTypeDef *hspi) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hspi); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_SPI_RxCpltCallback should be implemented in the user file - */ -} - -/** - * @brief Tx and Rx Transfer completed callback. - * @param hspi pointer to a SPI_HandleTypeDef structure that contains - * the configuration information for SPI module. - * @retval None - */ -__weak void HAL_SPI_TxRxCpltCallback(SPI_HandleTypeDef *hspi) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hspi); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_SPI_TxRxCpltCallback should be implemented in the user file - */ -} - -/** - * @brief Tx Half Transfer completed callback. - * @param hspi pointer to a SPI_HandleTypeDef structure that contains - * the configuration information for SPI module. - * @retval None - */ -__weak void HAL_SPI_TxHalfCpltCallback(SPI_HandleTypeDef *hspi) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hspi); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_SPI_TxHalfCpltCallback should be implemented in the user file - */ -} - -/** - * @brief Rx Half Transfer completed callback. - * @param hspi pointer to a SPI_HandleTypeDef structure that contains - * the configuration information for SPI module. - * @retval None - */ -__weak void HAL_SPI_RxHalfCpltCallback(SPI_HandleTypeDef *hspi) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hspi); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_SPI_RxHalfCpltCallback() should be implemented in the user file - */ -} - -/** - * @brief Tx and Rx Half Transfer callback. - * @param hspi pointer to a SPI_HandleTypeDef structure that contains - * the configuration information for SPI module. - * @retval None - */ -__weak void HAL_SPI_TxRxHalfCpltCallback(SPI_HandleTypeDef *hspi) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hspi); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_SPI_TxRxHalfCpltCallback() should be implemented in the user file - */ -} - -/** - * @brief SPI error callback. - * @param hspi pointer to a SPI_HandleTypeDef structure that contains - * the configuration information for SPI module. - * @retval None - */ -__weak void HAL_SPI_ErrorCallback(SPI_HandleTypeDef *hspi) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hspi); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_SPI_ErrorCallback should be implemented in the user file - */ - /* NOTE : The ErrorCode parameter in the hspi handle is updated by the SPI processes - and user can use HAL_SPI_GetError() API to check the latest error occurred - */ -} - -/** - * @brief SPI Abort Complete callback. - * @param hspi SPI handle. - * @retval None - */ -__weak void HAL_SPI_AbortCpltCallback(SPI_HandleTypeDef *hspi) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hspi); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_SPI_AbortCpltCallback can be implemented in the user file. - */ -} - -/** - * @} - */ - -/** @defgroup SPI_Exported_Functions_Group3 Peripheral State and Errors functions - * @brief SPI control functions - * -@verbatim - =============================================================================== - ##### Peripheral State and Errors functions ##### - =============================================================================== - [..] - This subsection provides a set of functions allowing to control the SPI. - (+) HAL_SPI_GetState() API can be helpful to check in run-time the state of the SPI peripheral - (+) HAL_SPI_GetError() check in run-time Errors occurring during communication -@endverbatim - * @{ - */ - -/** - * @brief Return the SPI handle state. - * @param hspi pointer to a SPI_HandleTypeDef structure that contains - * the configuration information for SPI module. - * @retval SPI state - */ -HAL_SPI_StateTypeDef HAL_SPI_GetState(SPI_HandleTypeDef *hspi) -{ - /* Return SPI handle state */ - return hspi->State; -} - -/** - * @brief Return the SPI error code. - * @param hspi pointer to a SPI_HandleTypeDef structure that contains - * the configuration information for SPI module. - * @retval SPI error code in bitmap format - */ -uint32_t HAL_SPI_GetError(SPI_HandleTypeDef *hspi) -{ - /* Return SPI ErrorCode */ - return hspi->ErrorCode; -} - -/** - * @} - */ - -/** - * @} - */ - -/** @addtogroup SPI_Private_Functions - * @brief Private functions - * @{ - */ - -/** - * @brief DMA SPI transmit process complete callback. - * @param hdma pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA module. - * @retval None - */ -static void SPI_DMATransmitCplt(DMA_HandleTypeDef *hdma) -{ - SPI_HandleTypeDef *hspi = (SPI_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); /* Derogation MISRAC2012-Rule-11.5 */ - uint32_t tickstart; - - /* Init tickstart for timeout management*/ - tickstart = HAL_GetTick(); - - /* DMA Normal Mode */ - if ((hdma->Instance->CCR & DMA_CCR_CIRC) != DMA_CCR_CIRC) - { - /* Disable ERR interrupt */ - __HAL_SPI_DISABLE_IT(hspi, SPI_IT_ERR); - - /* Disable Tx DMA Request */ - CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_TXDMAEN); - - /* Check the end of the transaction */ - if (SPI_EndRxTxTransaction(hspi, SPI_DEFAULT_TIMEOUT, tickstart) != HAL_OK) - { - SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_FLAG); - } - - /* Clear overrun flag in 2 Lines communication mode because received data is not read */ - if (hspi->Init.Direction == SPI_DIRECTION_2LINES) - { - __HAL_SPI_CLEAR_OVRFLAG(hspi); - } - - hspi->TxXferCount = 0U; - hspi->State = HAL_SPI_STATE_READY; - - if (hspi->ErrorCode != HAL_SPI_ERROR_NONE) - { - /* Call user error callback */ -#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) - hspi->ErrorCallback(hspi); -#else - HAL_SPI_ErrorCallback(hspi); -#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ - return; - } - } - /* Call user Tx complete callback */ -#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) - hspi->TxCpltCallback(hspi); -#else - HAL_SPI_TxCpltCallback(hspi); -#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ -} - -/** - * @brief DMA SPI receive process complete callback. - * @param hdma pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA module. - * @retval None - */ -static void SPI_DMAReceiveCplt(DMA_HandleTypeDef *hdma) -{ - SPI_HandleTypeDef *hspi = (SPI_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); /* Derogation MISRAC2012-Rule-11.5 */ - uint32_t tickstart; -#if (USE_SPI_CRC != 0U) - __IO uint32_t tmpreg = 0U; - __IO uint8_t *ptmpreg8; - __IO uint8_t tmpreg8 = 0; -#endif /* USE_SPI_CRC */ - - /* Init tickstart for timeout management*/ - tickstart = HAL_GetTick(); - - /* DMA Normal Mode */ - if ((hdma->Instance->CCR & DMA_CCR_CIRC) != DMA_CCR_CIRC) - { - /* Disable ERR interrupt */ - __HAL_SPI_DISABLE_IT(hspi, SPI_IT_ERR); - -#if (USE_SPI_CRC != 0U) - /* CRC handling */ - if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) - { - /* Wait until RXNE flag */ - if (SPI_WaitFlagStateUntilTimeout(hspi, SPI_FLAG_RXNE, SET, SPI_DEFAULT_TIMEOUT, tickstart) != HAL_OK) - { - /* Error on the CRC reception */ - SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_CRC); - } - /* Read CRC */ - if (hspi->Init.DataSize > SPI_DATASIZE_8BIT) - { - /* Read 16bit CRC */ - tmpreg = READ_REG(hspi->Instance->DR); - /* To avoid GCC warning */ - UNUSED(tmpreg); - } - else - { - /* Initialize the 8bit temporary pointer */ - ptmpreg8 = (__IO uint8_t *)&hspi->Instance->DR; - /* Read 8bit CRC */ - tmpreg8 = *ptmpreg8; - /* To avoid GCC warning */ - UNUSED(tmpreg8); - - if (hspi->Init.CRCLength == SPI_CRC_LENGTH_16BIT) - { - if (SPI_WaitFlagStateUntilTimeout(hspi, SPI_FLAG_RXNE, SET, SPI_DEFAULT_TIMEOUT, tickstart) != HAL_OK) - { - /* Error on the CRC reception */ - SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_CRC); - } - /* Read 8bit CRC again in case of 16bit CRC in 8bit Data mode */ - tmpreg8 = *ptmpreg8; - /* To avoid GCC warning */ - UNUSED(tmpreg8); - } - } - } -#endif /* USE_SPI_CRC */ - - /* Check if we are in Master RX 2 line mode */ - if ((hspi->Init.Direction == SPI_DIRECTION_2LINES) && (hspi->Init.Mode == SPI_MODE_MASTER)) - { - /* Disable Rx/Tx DMA Request (done by default to handle the case master rx direction 2 lines) */ - CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_TXDMAEN | SPI_CR2_RXDMAEN); - } - else - { - /* Normal case */ - CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_RXDMAEN); - } - - /* Check the end of the transaction */ - if (SPI_EndRxTransaction(hspi, SPI_DEFAULT_TIMEOUT, tickstart) != HAL_OK) - { - hspi->ErrorCode = HAL_SPI_ERROR_FLAG; - } - - hspi->RxXferCount = 0U; - hspi->State = HAL_SPI_STATE_READY; - -#if (USE_SPI_CRC != 0U) - /* Check if CRC error occurred */ - if (__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_CRCERR)) - { - SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_CRC); - __HAL_SPI_CLEAR_CRCERRFLAG(hspi); - } -#endif /* USE_SPI_CRC */ - - if (hspi->ErrorCode != HAL_SPI_ERROR_NONE) - { - /* Call user error callback */ -#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) - hspi->ErrorCallback(hspi); -#else - HAL_SPI_ErrorCallback(hspi); -#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ - return; - } - } - /* Call user Rx complete callback */ -#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) - hspi->RxCpltCallback(hspi); -#else - HAL_SPI_RxCpltCallback(hspi); -#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ -} - -/** - * @brief DMA SPI transmit receive process complete callback. - * @param hdma pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA module. - * @retval None - */ -static void SPI_DMATransmitReceiveCplt(DMA_HandleTypeDef *hdma) -{ - SPI_HandleTypeDef *hspi = (SPI_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); /* Derogation MISRAC2012-Rule-11.5 */ - uint32_t tickstart; -#if (USE_SPI_CRC != 0U) - __IO uint32_t tmpreg = 0U; - __IO uint8_t *ptmpreg8; - __IO uint8_t tmpreg8 = 0; -#endif /* USE_SPI_CRC */ - - /* Init tickstart for timeout management*/ - tickstart = HAL_GetTick(); - - /* DMA Normal Mode */ - if ((hdma->Instance->CCR & DMA_CCR_CIRC) != DMA_CCR_CIRC) - { - /* Disable ERR interrupt */ - __HAL_SPI_DISABLE_IT(hspi, SPI_IT_ERR); - -#if (USE_SPI_CRC != 0U) - /* CRC handling */ - if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) - { - if ((hspi->Init.DataSize == SPI_DATASIZE_8BIT) && (hspi->Init.CRCLength == SPI_CRC_LENGTH_8BIT)) - { - if (SPI_WaitFifoStateUntilTimeout(hspi, SPI_FLAG_FRLVL, SPI_FRLVL_QUARTER_FULL, SPI_DEFAULT_TIMEOUT, - tickstart) != HAL_OK) - { - /* Error on the CRC reception */ - SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_CRC); - } - /* Initialize the 8bit temporary pointer */ - ptmpreg8 = (__IO uint8_t *)&hspi->Instance->DR; - /* Read 8bit CRC */ - tmpreg8 = *ptmpreg8; - /* To avoid GCC warning */ - UNUSED(tmpreg8); - } - else - { - if (SPI_WaitFifoStateUntilTimeout(hspi, SPI_FLAG_FRLVL, SPI_FRLVL_HALF_FULL, SPI_DEFAULT_TIMEOUT, tickstart) != HAL_OK) - { - /* Error on the CRC reception */ - SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_CRC); - } - /* Read CRC to Flush DR and RXNE flag */ - tmpreg = READ_REG(hspi->Instance->DR); - /* To avoid GCC warning */ - UNUSED(tmpreg); - } - } -#endif /* USE_SPI_CRC */ - - /* Check the end of the transaction */ - if (SPI_EndRxTxTransaction(hspi, SPI_DEFAULT_TIMEOUT, tickstart) != HAL_OK) - { - SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_FLAG); - } - - /* Disable Rx/Tx DMA Request */ - CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_TXDMAEN | SPI_CR2_RXDMAEN); - - hspi->TxXferCount = 0U; - hspi->RxXferCount = 0U; - hspi->State = HAL_SPI_STATE_READY; - -#if (USE_SPI_CRC != 0U) - /* Check if CRC error occurred */ - if (__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_CRCERR)) - { - SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_CRC); - __HAL_SPI_CLEAR_CRCERRFLAG(hspi); - } -#endif /* USE_SPI_CRC */ - - if (hspi->ErrorCode != HAL_SPI_ERROR_NONE) - { - /* Call user error callback */ -#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) - hspi->ErrorCallback(hspi); -#else - HAL_SPI_ErrorCallback(hspi); -#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ - return; - } - } - /* Call user TxRx complete callback */ -#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) - hspi->TxRxCpltCallback(hspi); -#else - HAL_SPI_TxRxCpltCallback(hspi); -#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ -} - -/** - * @brief DMA SPI half transmit process complete callback. - * @param hdma pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA module. - * @retval None - */ -static void SPI_DMAHalfTransmitCplt(DMA_HandleTypeDef *hdma) -{ - SPI_HandleTypeDef *hspi = (SPI_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); /* Derogation MISRAC2012-Rule-11.5 */ - - /* Call user Tx half complete callback */ -#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) - hspi->TxHalfCpltCallback(hspi); -#else - HAL_SPI_TxHalfCpltCallback(hspi); -#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ -} - -/** - * @brief DMA SPI half receive process complete callback - * @param hdma pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA module. - * @retval None - */ -static void SPI_DMAHalfReceiveCplt(DMA_HandleTypeDef *hdma) -{ - SPI_HandleTypeDef *hspi = (SPI_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); /* Derogation MISRAC2012-Rule-11.5 */ - - /* Call user Rx half complete callback */ -#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) - hspi->RxHalfCpltCallback(hspi); -#else - HAL_SPI_RxHalfCpltCallback(hspi); -#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ -} - -/** - * @brief DMA SPI half transmit receive process complete callback. - * @param hdma pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA module. - * @retval None - */ -static void SPI_DMAHalfTransmitReceiveCplt(DMA_HandleTypeDef *hdma) -{ - SPI_HandleTypeDef *hspi = (SPI_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); /* Derogation MISRAC2012-Rule-11.5 */ - - /* Call user TxRx half complete callback */ -#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) - hspi->TxRxHalfCpltCallback(hspi); -#else - HAL_SPI_TxRxHalfCpltCallback(hspi); -#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ -} - -/** - * @brief DMA SPI communication error callback. - * @param hdma pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA module. - * @retval None - */ -static void SPI_DMAError(DMA_HandleTypeDef *hdma) -{ - SPI_HandleTypeDef *hspi = (SPI_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); /* Derogation MISRAC2012-Rule-11.5 */ - - /* Stop the disable DMA transfer on SPI side */ - CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_TXDMAEN | SPI_CR2_RXDMAEN); - - SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_DMA); - hspi->State = HAL_SPI_STATE_READY; - /* Call user error callback */ -#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) - hspi->ErrorCallback(hspi); -#else - HAL_SPI_ErrorCallback(hspi); -#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ -} - -/** - * @brief DMA SPI communication abort callback, when initiated by HAL services on Error - * (To be called at end of DMA Abort procedure following error occurrence). - * @param hdma DMA handle. - * @retval None - */ -static void SPI_DMAAbortOnError(DMA_HandleTypeDef *hdma) -{ - SPI_HandleTypeDef *hspi = (SPI_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); /* Derogation MISRAC2012-Rule-11.5 */ - hspi->RxXferCount = 0U; - hspi->TxXferCount = 0U; - - /* Call user error callback */ -#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) - hspi->ErrorCallback(hspi); -#else - HAL_SPI_ErrorCallback(hspi); -#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ -} - -/** - * @brief DMA SPI Tx communication abort callback, when initiated by user - * (To be called at end of DMA Tx Abort procedure following user abort request). - * @note When this callback is executed, User Abort complete call back is called only if no - * Abort still ongoing for Rx DMA Handle. - * @param hdma DMA handle. - * @retval None - */ -static void SPI_DMATxAbortCallback(DMA_HandleTypeDef *hdma) -{ - SPI_HandleTypeDef *hspi = (SPI_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); /* Derogation MISRAC2012-Rule-11.5 */ - - hspi->hdmatx->XferAbortCallback = NULL; - - /* Disable Tx DMA Request */ - CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_TXDMAEN); - - if (SPI_EndRxTxTransaction(hspi, SPI_DEFAULT_TIMEOUT, HAL_GetTick()) != HAL_OK) - { - hspi->ErrorCode = HAL_SPI_ERROR_ABORT; - } - - /* Disable SPI Peripheral */ - __HAL_SPI_DISABLE(hspi); - - /* Empty the FRLVL fifo */ - if (SPI_WaitFifoStateUntilTimeout(hspi, SPI_FLAG_FRLVL, SPI_FRLVL_EMPTY, SPI_DEFAULT_TIMEOUT, HAL_GetTick()) != HAL_OK) - { - hspi->ErrorCode = HAL_SPI_ERROR_ABORT; - } - - /* Check if an Abort process is still ongoing */ - if (hspi->hdmarx != NULL) - { - if (hspi->hdmarx->XferAbortCallback != NULL) - { - return; - } - } - - /* No Abort process still ongoing : All DMA Stream/Channel are aborted, call user Abort Complete callback */ - hspi->RxXferCount = 0U; - hspi->TxXferCount = 0U; - - /* Check no error during Abort procedure */ - if (hspi->ErrorCode != HAL_SPI_ERROR_ABORT) - { - /* Reset errorCode */ - hspi->ErrorCode = HAL_SPI_ERROR_NONE; - } - - /* Clear the Error flags in the SR register */ - __HAL_SPI_CLEAR_OVRFLAG(hspi); - __HAL_SPI_CLEAR_FREFLAG(hspi); - - /* Restore hspi->State to Ready */ - hspi->State = HAL_SPI_STATE_READY; - - /* Call user Abort complete callback */ -#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) - hspi->AbortCpltCallback(hspi); -#else - HAL_SPI_AbortCpltCallback(hspi); -#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ -} - -/** - * @brief DMA SPI Rx communication abort callback, when initiated by user - * (To be called at end of DMA Rx Abort procedure following user abort request). - * @note When this callback is executed, User Abort complete call back is called only if no - * Abort still ongoing for Tx DMA Handle. - * @param hdma DMA handle. - * @retval None - */ -static void SPI_DMARxAbortCallback(DMA_HandleTypeDef *hdma) -{ - SPI_HandleTypeDef *hspi = (SPI_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); /* Derogation MISRAC2012-Rule-11.5 */ - - /* Disable SPI Peripheral */ - __HAL_SPI_DISABLE(hspi); - - hspi->hdmarx->XferAbortCallback = NULL; - - /* Disable Rx DMA Request */ - CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_RXDMAEN); - - /* Control the BSY flag */ - if (SPI_WaitFlagStateUntilTimeout(hspi, SPI_FLAG_BSY, RESET, SPI_DEFAULT_TIMEOUT, HAL_GetTick()) != HAL_OK) - { - hspi->ErrorCode = HAL_SPI_ERROR_ABORT; - } - - /* Empty the FRLVL fifo */ - if (SPI_WaitFifoStateUntilTimeout(hspi, SPI_FLAG_FRLVL, SPI_FRLVL_EMPTY, SPI_DEFAULT_TIMEOUT, HAL_GetTick()) != HAL_OK) - { - hspi->ErrorCode = HAL_SPI_ERROR_ABORT; - } - - /* Check if an Abort process is still ongoing */ - if (hspi->hdmatx != NULL) - { - if (hspi->hdmatx->XferAbortCallback != NULL) - { - return; - } - } - - /* No Abort process still ongoing : All DMA Stream/Channel are aborted, call user Abort Complete callback */ - hspi->RxXferCount = 0U; - hspi->TxXferCount = 0U; - - /* Check no error during Abort procedure */ - if (hspi->ErrorCode != HAL_SPI_ERROR_ABORT) - { - /* Reset errorCode */ - hspi->ErrorCode = HAL_SPI_ERROR_NONE; - } - - /* Clear the Error flags in the SR register */ - __HAL_SPI_CLEAR_OVRFLAG(hspi); - __HAL_SPI_CLEAR_FREFLAG(hspi); - - /* Restore hspi->State to Ready */ - hspi->State = HAL_SPI_STATE_READY; - - /* Call user Abort complete callback */ -#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) - hspi->AbortCpltCallback(hspi); -#else - HAL_SPI_AbortCpltCallback(hspi); -#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ -} - -/** - * @brief Rx 8-bit handler for Transmit and Receive in Interrupt mode. - * @param hspi pointer to a SPI_HandleTypeDef structure that contains - * the configuration information for SPI module. - * @retval None - */ -static void SPI_2linesRxISR_8BIT(struct __SPI_HandleTypeDef *hspi) -{ - /* Receive data in packing mode */ - if (hspi->RxXferCount > 1U) - { - *((uint16_t *)hspi->pRxBuffPtr) = (uint16_t)(hspi->Instance->DR); - hspi->pRxBuffPtr += sizeof(uint16_t); - hspi->RxXferCount -= 2U; - if (hspi->RxXferCount == 1U) - { - /* Set RX Fifo threshold according the reception data length: 8bit */ - SET_BIT(hspi->Instance->CR2, SPI_RXFIFO_THRESHOLD); - } - } - /* Receive data in 8 Bit mode */ - else - { - *hspi->pRxBuffPtr = *((__IO uint8_t *)&hspi->Instance->DR); - hspi->pRxBuffPtr++; - hspi->RxXferCount--; - } - - /* Check end of the reception */ - if (hspi->RxXferCount == 0U) - { -#if (USE_SPI_CRC != 0U) - if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) - { - SET_BIT(hspi->Instance->CR2, SPI_RXFIFO_THRESHOLD); - hspi->RxISR = SPI_2linesRxISR_8BITCRC; - return; - } -#endif /* USE_SPI_CRC */ - - /* Disable RXNE and ERR interrupt */ - __HAL_SPI_DISABLE_IT(hspi, (SPI_IT_RXNE | SPI_IT_ERR)); - - if (hspi->TxXferCount == 0U) - { - SPI_CloseRxTx_ISR(hspi); - } - } -} - -#if (USE_SPI_CRC != 0U) -/** - * @brief Rx 8-bit handler for Transmit and Receive in Interrupt mode. - * @param hspi pointer to a SPI_HandleTypeDef structure that contains - * the configuration information for SPI module. - * @retval None - */ -static void SPI_2linesRxISR_8BITCRC(struct __SPI_HandleTypeDef *hspi) -{ - __IO uint8_t *ptmpreg8; - __IO uint8_t tmpreg8 = 0; - - /* Initialize the 8bit temporary pointer */ - ptmpreg8 = (__IO uint8_t *)&hspi->Instance->DR; - /* Read 8bit CRC to flush Data Register */ - tmpreg8 = *ptmpreg8; - /* To avoid GCC warning */ - UNUSED(tmpreg8); - - hspi->CRCSize--; - - /* Check end of the reception */ - if (hspi->CRCSize == 0U) - { - /* Disable RXNE and ERR interrupt */ - __HAL_SPI_DISABLE_IT(hspi, (SPI_IT_RXNE | SPI_IT_ERR)); - - if (hspi->TxXferCount == 0U) - { - SPI_CloseRxTx_ISR(hspi); - } - } -} -#endif /* USE_SPI_CRC */ - -/** - * @brief Tx 8-bit handler for Transmit and Receive in Interrupt mode. - * @param hspi pointer to a SPI_HandleTypeDef structure that contains - * the configuration information for SPI module. - * @retval None - */ -static void SPI_2linesTxISR_8BIT(struct __SPI_HandleTypeDef *hspi) -{ - /* Transmit data in packing Bit mode */ - if (hspi->TxXferCount >= 2U) - { - hspi->Instance->DR = *((uint16_t *)hspi->pTxBuffPtr); - hspi->pTxBuffPtr += sizeof(uint16_t); - hspi->TxXferCount -= 2U; - } - /* Transmit data in 8 Bit mode */ - else - { - *(__IO uint8_t *)&hspi->Instance->DR = (*hspi->pTxBuffPtr); - hspi->pTxBuffPtr++; - hspi->TxXferCount--; - } - - /* Check the end of the transmission */ - if (hspi->TxXferCount == 0U) - { -#if (USE_SPI_CRC != 0U) - if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) - { - /* Set CRC Next Bit to send CRC */ - SET_BIT(hspi->Instance->CR1, SPI_CR1_CRCNEXT); - /* Disable TXE interrupt */ - __HAL_SPI_DISABLE_IT(hspi, SPI_IT_TXE); - return; - } -#endif /* USE_SPI_CRC */ - - /* Disable TXE interrupt */ - __HAL_SPI_DISABLE_IT(hspi, SPI_IT_TXE); - - if (hspi->RxXferCount == 0U) - { - SPI_CloseRxTx_ISR(hspi); - } - } -} - -/** - * @brief Rx 16-bit handler for Transmit and Receive in Interrupt mode. - * @param hspi pointer to a SPI_HandleTypeDef structure that contains - * the configuration information for SPI module. - * @retval None - */ -static void SPI_2linesRxISR_16BIT(struct __SPI_HandleTypeDef *hspi) -{ - /* Receive data in 16 Bit mode */ - *((uint16_t *)hspi->pRxBuffPtr) = (uint16_t)(hspi->Instance->DR); - hspi->pRxBuffPtr += sizeof(uint16_t); - hspi->RxXferCount--; - - if (hspi->RxXferCount == 0U) - { -#if (USE_SPI_CRC != 0U) - if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) - { - hspi->RxISR = SPI_2linesRxISR_16BITCRC; - return; - } -#endif /* USE_SPI_CRC */ - - /* Disable RXNE interrupt */ - __HAL_SPI_DISABLE_IT(hspi, SPI_IT_RXNE); - - if (hspi->TxXferCount == 0U) - { - SPI_CloseRxTx_ISR(hspi); - } - } -} - -#if (USE_SPI_CRC != 0U) -/** - * @brief Manage the CRC 16-bit receive for Transmit and Receive in Interrupt mode. - * @param hspi pointer to a SPI_HandleTypeDef structure that contains - * the configuration information for SPI module. - * @retval None - */ -static void SPI_2linesRxISR_16BITCRC(struct __SPI_HandleTypeDef *hspi) -{ - __IO uint32_t tmpreg = 0U; - - /* Read 16bit CRC to flush Data Register */ - tmpreg = READ_REG(hspi->Instance->DR); - /* To avoid GCC warning */ - UNUSED(tmpreg); - - /* Disable RXNE interrupt */ - __HAL_SPI_DISABLE_IT(hspi, SPI_IT_RXNE); - - SPI_CloseRxTx_ISR(hspi); -} -#endif /* USE_SPI_CRC */ - -/** - * @brief Tx 16-bit handler for Transmit and Receive in Interrupt mode. - * @param hspi pointer to a SPI_HandleTypeDef structure that contains - * the configuration information for SPI module. - * @retval None - */ -static void SPI_2linesTxISR_16BIT(struct __SPI_HandleTypeDef *hspi) -{ - /* Transmit data in 16 Bit mode */ - hspi->Instance->DR = *((uint16_t *)hspi->pTxBuffPtr); - hspi->pTxBuffPtr += sizeof(uint16_t); - hspi->TxXferCount--; - - /* Enable CRC Transmission */ - if (hspi->TxXferCount == 0U) - { -#if (USE_SPI_CRC != 0U) - if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) - { - /* Set CRC Next Bit to send CRC */ - SET_BIT(hspi->Instance->CR1, SPI_CR1_CRCNEXT); - /* Disable TXE interrupt */ - __HAL_SPI_DISABLE_IT(hspi, SPI_IT_TXE); - return; - } -#endif /* USE_SPI_CRC */ - - /* Disable TXE interrupt */ - __HAL_SPI_DISABLE_IT(hspi, SPI_IT_TXE); - - if (hspi->RxXferCount == 0U) - { - SPI_CloseRxTx_ISR(hspi); - } - } -} - -#if (USE_SPI_CRC != 0U) -/** - * @brief Manage the CRC 8-bit receive in Interrupt context. - * @param hspi pointer to a SPI_HandleTypeDef structure that contains - * the configuration information for SPI module. - * @retval None - */ -static void SPI_RxISR_8BITCRC(struct __SPI_HandleTypeDef *hspi) -{ - __IO uint8_t *ptmpreg8; - __IO uint8_t tmpreg8 = 0; - - /* Initialize the 8bit temporary pointer */ - ptmpreg8 = (__IO uint8_t *)&hspi->Instance->DR; - /* Read 8bit CRC to flush Data Register */ - tmpreg8 = *ptmpreg8; - /* To avoid GCC warning */ - UNUSED(tmpreg8); - - hspi->CRCSize--; - - if (hspi->CRCSize == 0U) - { - SPI_CloseRx_ISR(hspi); - } -} -#endif /* USE_SPI_CRC */ - -/** - * @brief Manage the receive 8-bit in Interrupt context. - * @param hspi pointer to a SPI_HandleTypeDef structure that contains - * the configuration information for SPI module. - * @retval None - */ -static void SPI_RxISR_8BIT(struct __SPI_HandleTypeDef *hspi) -{ - *hspi->pRxBuffPtr = (*(__IO uint8_t *)&hspi->Instance->DR); - hspi->pRxBuffPtr++; - hspi->RxXferCount--; - -#if (USE_SPI_CRC != 0U) - /* Enable CRC Transmission */ - if ((hspi->RxXferCount == 1U) && (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)) - { - SET_BIT(hspi->Instance->CR1, SPI_CR1_CRCNEXT); - } -#endif /* USE_SPI_CRC */ - - if (hspi->RxXferCount == 0U) - { -#if (USE_SPI_CRC != 0U) - if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) - { - hspi->RxISR = SPI_RxISR_8BITCRC; - return; - } -#endif /* USE_SPI_CRC */ - SPI_CloseRx_ISR(hspi); - } -} - -#if (USE_SPI_CRC != 0U) -/** - * @brief Manage the CRC 16-bit receive in Interrupt context. - * @param hspi pointer to a SPI_HandleTypeDef structure that contains - * the configuration information for SPI module. - * @retval None - */ -static void SPI_RxISR_16BITCRC(struct __SPI_HandleTypeDef *hspi) -{ - __IO uint32_t tmpreg = 0U; - - /* Read 16bit CRC to flush Data Register */ - tmpreg = READ_REG(hspi->Instance->DR); - /* To avoid GCC warning */ - UNUSED(tmpreg); - - /* Disable RXNE and ERR interrupt */ - __HAL_SPI_DISABLE_IT(hspi, (SPI_IT_RXNE | SPI_IT_ERR)); - - SPI_CloseRx_ISR(hspi); -} -#endif /* USE_SPI_CRC */ - -/** - * @brief Manage the 16-bit receive in Interrupt context. - * @param hspi pointer to a SPI_HandleTypeDef structure that contains - * the configuration information for SPI module. - * @retval None - */ -static void SPI_RxISR_16BIT(struct __SPI_HandleTypeDef *hspi) -{ - *((uint16_t *)hspi->pRxBuffPtr) = (uint16_t)(hspi->Instance->DR); - hspi->pRxBuffPtr += sizeof(uint16_t); - hspi->RxXferCount--; - -#if (USE_SPI_CRC != 0U) - /* Enable CRC Transmission */ - if ((hspi->RxXferCount == 1U) && (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)) - { - SET_BIT(hspi->Instance->CR1, SPI_CR1_CRCNEXT); - } -#endif /* USE_SPI_CRC */ - - if (hspi->RxXferCount == 0U) - { -#if (USE_SPI_CRC != 0U) - if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) - { - hspi->RxISR = SPI_RxISR_16BITCRC; - return; - } -#endif /* USE_SPI_CRC */ - SPI_CloseRx_ISR(hspi); - } -} - -/** - * @brief Handle the data 8-bit transmit in Interrupt mode. - * @param hspi pointer to a SPI_HandleTypeDef structure that contains - * the configuration information for SPI module. - * @retval None - */ -static void SPI_TxISR_8BIT(struct __SPI_HandleTypeDef *hspi) -{ - *(__IO uint8_t *)&hspi->Instance->DR = (*hspi->pTxBuffPtr); - hspi->pTxBuffPtr++; - hspi->TxXferCount--; - - if (hspi->TxXferCount == 0U) - { -#if (USE_SPI_CRC != 0U) - if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) - { - /* Enable CRC Transmission */ - SET_BIT(hspi->Instance->CR1, SPI_CR1_CRCNEXT); - } -#endif /* USE_SPI_CRC */ - SPI_CloseTx_ISR(hspi); - } -} - -/** - * @brief Handle the data 16-bit transmit in Interrupt mode. - * @param hspi pointer to a SPI_HandleTypeDef structure that contains - * the configuration information for SPI module. - * @retval None - */ -static void SPI_TxISR_16BIT(struct __SPI_HandleTypeDef *hspi) -{ - /* Transmit data in 16 Bit mode */ - hspi->Instance->DR = *((uint16_t *)hspi->pTxBuffPtr); - hspi->pTxBuffPtr += sizeof(uint16_t); - hspi->TxXferCount--; - - if (hspi->TxXferCount == 0U) - { -#if (USE_SPI_CRC != 0U) - if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) - { - /* Enable CRC Transmission */ - SET_BIT(hspi->Instance->CR1, SPI_CR1_CRCNEXT); - } -#endif /* USE_SPI_CRC */ - SPI_CloseTx_ISR(hspi); - } -} - -/** - * @brief Handle SPI Communication Timeout. - * @param hspi pointer to a SPI_HandleTypeDef structure that contains - * the configuration information for SPI module. - * @param Flag SPI flag to check - * @param State flag state to check - * @param Timeout Timeout duration - * @param Tickstart tick start value - * @retval HAL status - */ -static HAL_StatusTypeDef SPI_WaitFlagStateUntilTimeout(SPI_HandleTypeDef *hspi, uint32_t Flag, FlagStatus State, - uint32_t Timeout, uint32_t Tickstart) -{ - __IO uint32_t count; - uint32_t tmp_timeout; - uint32_t tmp_tickstart; - - /* Adjust Timeout value in case of end of transfer */ - tmp_timeout = Timeout - (HAL_GetTick() - Tickstart); - tmp_tickstart = HAL_GetTick(); - - /* Calculate Timeout based on a software loop to avoid blocking issue if Systick is disabled */ - count = tmp_timeout * ((SystemCoreClock * 32U) >> 20U); - - while ((__HAL_SPI_GET_FLAG(hspi, Flag) ? SET : RESET) != State) - { - if (Timeout != HAL_MAX_DELAY) - { - if (((HAL_GetTick() - tmp_tickstart) >= tmp_timeout) || (tmp_timeout == 0U)) - { - /* Disable the SPI and reset the CRC: the CRC value should be cleared - on both master and slave sides in order to resynchronize the master - and slave for their respective CRC calculation */ - - /* Disable TXE, RXNE and ERR interrupts for the interrupt process */ - __HAL_SPI_DISABLE_IT(hspi, (SPI_IT_TXE | SPI_IT_RXNE | SPI_IT_ERR)); - - if ((hspi->Init.Mode == SPI_MODE_MASTER) && ((hspi->Init.Direction == SPI_DIRECTION_1LINE) - || (hspi->Init.Direction == SPI_DIRECTION_2LINES_RXONLY))) - { - /* Disable SPI peripheral */ - __HAL_SPI_DISABLE(hspi); - } - - /* Reset CRC Calculation */ - if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) - { - SPI_RESET_CRC(hspi); - } - - hspi->State = HAL_SPI_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(hspi); - - return HAL_TIMEOUT; - } - /* If Systick is disabled or not incremented, deactivate timeout to go in disable loop procedure */ - if (count == 0U) - { - tmp_timeout = 0U; - } - count--; - } - } - - return HAL_OK; -} - -/** - * @brief Handle SPI FIFO Communication Timeout. - * @param hspi pointer to a SPI_HandleTypeDef structure that contains - * the configuration information for SPI module. - * @param Fifo Fifo to check - * @param State Fifo state to check - * @param Timeout Timeout duration - * @param Tickstart tick start value - * @retval HAL status - */ -static HAL_StatusTypeDef SPI_WaitFifoStateUntilTimeout(SPI_HandleTypeDef *hspi, uint32_t Fifo, uint32_t State, - uint32_t Timeout, uint32_t Tickstart) -{ - __IO uint32_t count; - uint32_t tmp_timeout; - uint32_t tmp_tickstart; - __IO uint8_t *ptmpreg8; - __IO uint8_t tmpreg8 = 0; - - /* Adjust Timeout value in case of end of transfer */ - tmp_timeout = Timeout - (HAL_GetTick() - Tickstart); - tmp_tickstart = HAL_GetTick(); - - /* Initialize the 8bit temporary pointer */ - ptmpreg8 = (__IO uint8_t *)&hspi->Instance->DR; - - /* Calculate Timeout based on a software loop to avoid blocking issue if Systick is disabled */ - count = tmp_timeout * ((SystemCoreClock * 35U) >> 20U); - - while ((hspi->Instance->SR & Fifo) != State) - { - if ((Fifo == SPI_SR_FRLVL) && (State == SPI_FRLVL_EMPTY)) - { - /* Flush Data Register by a blank read */ - tmpreg8 = *ptmpreg8; - /* To avoid GCC warning */ - UNUSED(tmpreg8); - } - - if (Timeout != HAL_MAX_DELAY) - { - if (((HAL_GetTick() - tmp_tickstart) >= tmp_timeout) || (tmp_timeout == 0U)) - { - /* Disable the SPI and reset the CRC: the CRC value should be cleared - on both master and slave sides in order to resynchronize the master - and slave for their respective CRC calculation */ - - /* Disable TXE, RXNE and ERR interrupts for the interrupt process */ - __HAL_SPI_DISABLE_IT(hspi, (SPI_IT_TXE | SPI_IT_RXNE | SPI_IT_ERR)); - - if ((hspi->Init.Mode == SPI_MODE_MASTER) && ((hspi->Init.Direction == SPI_DIRECTION_1LINE) - || (hspi->Init.Direction == SPI_DIRECTION_2LINES_RXONLY))) - { - /* Disable SPI peripheral */ - __HAL_SPI_DISABLE(hspi); - } - - /* Reset CRC Calculation */ - if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) - { - SPI_RESET_CRC(hspi); - } - - hspi->State = HAL_SPI_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(hspi); - - return HAL_TIMEOUT; - } - /* If Systick is disabled or not incremented, deactivate timeout to go in disable loop procedure */ - if (count == 0U) - { - tmp_timeout = 0U; - } - count--; - } - } - - return HAL_OK; -} - -/** - * @brief Handle the check of the RX transaction complete. - * @param hspi pointer to a SPI_HandleTypeDef structure that contains - * the configuration information for SPI module. - * @param Timeout Timeout duration - * @param Tickstart tick start value - * @retval HAL status - */ -static HAL_StatusTypeDef SPI_EndRxTransaction(SPI_HandleTypeDef *hspi, uint32_t Timeout, uint32_t Tickstart) -{ - if ((hspi->Init.Mode == SPI_MODE_MASTER) && ((hspi->Init.Direction == SPI_DIRECTION_1LINE) - || (hspi->Init.Direction == SPI_DIRECTION_2LINES_RXONLY))) - { - /* Disable SPI peripheral */ - __HAL_SPI_DISABLE(hspi); - } - - /* Control the BSY flag */ - if (SPI_WaitFlagStateUntilTimeout(hspi, SPI_FLAG_BSY, RESET, Timeout, Tickstart) != HAL_OK) - { - SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_FLAG); - return HAL_TIMEOUT; - } - - if ((hspi->Init.Mode == SPI_MODE_MASTER) && ((hspi->Init.Direction == SPI_DIRECTION_1LINE) - || (hspi->Init.Direction == SPI_DIRECTION_2LINES_RXONLY))) - { - /* Empty the FRLVL fifo */ - if (SPI_WaitFifoStateUntilTimeout(hspi, SPI_FLAG_FRLVL, SPI_FRLVL_EMPTY, Timeout, Tickstart) != HAL_OK) - { - SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_FLAG); - return HAL_TIMEOUT; - } - } - return HAL_OK; -} - -/** - * @brief Handle the check of the RXTX or TX transaction complete. - * @param hspi SPI handle - * @param Timeout Timeout duration - * @param Tickstart tick start value - * @retval HAL status - */ -static HAL_StatusTypeDef SPI_EndRxTxTransaction(SPI_HandleTypeDef *hspi, uint32_t Timeout, uint32_t Tickstart) -{ - /* Control if the TX fifo is empty */ - if (SPI_WaitFifoStateUntilTimeout(hspi, SPI_FLAG_FTLVL, SPI_FTLVL_EMPTY, Timeout, Tickstart) != HAL_OK) - { - SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_FLAG); - return HAL_TIMEOUT; - } - - /* Control the BSY flag */ - if (SPI_WaitFlagStateUntilTimeout(hspi, SPI_FLAG_BSY, RESET, Timeout, Tickstart) != HAL_OK) - { - SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_FLAG); - return HAL_TIMEOUT; - } - - /* Control if the RX fifo is empty */ - if (SPI_WaitFifoStateUntilTimeout(hspi, SPI_FLAG_FRLVL, SPI_FRLVL_EMPTY, Timeout, Tickstart) != HAL_OK) - { - SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_FLAG); - return HAL_TIMEOUT; - } - - return HAL_OK; -} - -/** - * @brief Handle the end of the RXTX transaction. - * @param hspi pointer to a SPI_HandleTypeDef structure that contains - * the configuration information for SPI module. - * @retval None - */ -static void SPI_CloseRxTx_ISR(SPI_HandleTypeDef *hspi) -{ - uint32_t tickstart; - - /* Init tickstart for timeout management */ - tickstart = HAL_GetTick(); - - /* Disable ERR interrupt */ - __HAL_SPI_DISABLE_IT(hspi, SPI_IT_ERR); - - /* Check the end of the transaction */ - if (SPI_EndRxTxTransaction(hspi, SPI_DEFAULT_TIMEOUT, tickstart) != HAL_OK) - { - SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_FLAG); - } - -#if (USE_SPI_CRC != 0U) - /* Check if CRC error occurred */ - if (__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_CRCERR) != RESET) - { - hspi->State = HAL_SPI_STATE_READY; - SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_CRC); - __HAL_SPI_CLEAR_CRCERRFLAG(hspi); - /* Call user error callback */ -#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) - hspi->ErrorCallback(hspi); -#else - HAL_SPI_ErrorCallback(hspi); -#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ - } - else - { -#endif /* USE_SPI_CRC */ - if (hspi->ErrorCode == HAL_SPI_ERROR_NONE) - { - if (hspi->State == HAL_SPI_STATE_BUSY_RX) - { - hspi->State = HAL_SPI_STATE_READY; - /* Call user Rx complete callback */ -#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) - hspi->RxCpltCallback(hspi); -#else - HAL_SPI_RxCpltCallback(hspi); -#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ - } - else - { - hspi->State = HAL_SPI_STATE_READY; - /* Call user TxRx complete callback */ -#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) - hspi->TxRxCpltCallback(hspi); -#else - HAL_SPI_TxRxCpltCallback(hspi); -#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ - } - } - else - { - hspi->State = HAL_SPI_STATE_READY; - /* Call user error callback */ -#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) - hspi->ErrorCallback(hspi); -#else - HAL_SPI_ErrorCallback(hspi); -#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ - } -#if (USE_SPI_CRC != 0U) - } -#endif /* USE_SPI_CRC */ -} - -/** - * @brief Handle the end of the RX transaction. - * @param hspi pointer to a SPI_HandleTypeDef structure that contains - * the configuration information for SPI module. - * @retval None - */ -static void SPI_CloseRx_ISR(SPI_HandleTypeDef *hspi) -{ - /* Disable RXNE and ERR interrupt */ - __HAL_SPI_DISABLE_IT(hspi, (SPI_IT_RXNE | SPI_IT_ERR)); - - /* Check the end of the transaction */ - if (SPI_EndRxTransaction(hspi, SPI_DEFAULT_TIMEOUT, HAL_GetTick()) != HAL_OK) - { - SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_FLAG); - } - hspi->State = HAL_SPI_STATE_READY; - -#if (USE_SPI_CRC != 0U) - /* Check if CRC error occurred */ - if (__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_CRCERR) != RESET) - { - SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_CRC); - __HAL_SPI_CLEAR_CRCERRFLAG(hspi); - /* Call user error callback */ -#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) - hspi->ErrorCallback(hspi); -#else - HAL_SPI_ErrorCallback(hspi); -#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ - } - else - { -#endif /* USE_SPI_CRC */ - if (hspi->ErrorCode == HAL_SPI_ERROR_NONE) - { - /* Call user Rx complete callback */ -#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) - hspi->RxCpltCallback(hspi); -#else - HAL_SPI_RxCpltCallback(hspi); -#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ - } - else - { - /* Call user error callback */ -#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) - hspi->ErrorCallback(hspi); -#else - HAL_SPI_ErrorCallback(hspi); -#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ - } -#if (USE_SPI_CRC != 0U) - } -#endif /* USE_SPI_CRC */ -} - -/** - * @brief Handle the end of the TX transaction. - * @param hspi pointer to a SPI_HandleTypeDef structure that contains - * the configuration information for SPI module. - * @retval None - */ -static void SPI_CloseTx_ISR(SPI_HandleTypeDef *hspi) -{ - uint32_t tickstart; - - /* Init tickstart for timeout management*/ - tickstart = HAL_GetTick(); - - /* Disable TXE and ERR interrupt */ - __HAL_SPI_DISABLE_IT(hspi, (SPI_IT_TXE | SPI_IT_ERR)); - - /* Check the end of the transaction */ - if (SPI_EndRxTxTransaction(hspi, SPI_DEFAULT_TIMEOUT, tickstart) != HAL_OK) - { - SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_FLAG); - } - - /* Clear overrun flag in 2 Lines communication mode because received is not read */ - if (hspi->Init.Direction == SPI_DIRECTION_2LINES) - { - __HAL_SPI_CLEAR_OVRFLAG(hspi); - } - - hspi->State = HAL_SPI_STATE_READY; - if (hspi->ErrorCode != HAL_SPI_ERROR_NONE) - { - /* Call user error callback */ -#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) - hspi->ErrorCallback(hspi); -#else - HAL_SPI_ErrorCallback(hspi); -#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ - } - else - { - /* Call user Rx complete callback */ -#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) - hspi->TxCpltCallback(hspi); -#else - HAL_SPI_TxCpltCallback(hspi); -#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ - } -} - -/** - * @brief Handle abort a Rx transaction. - * @param hspi pointer to a SPI_HandleTypeDef structure that contains - * the configuration information for SPI module. - * @retval None - */ -static void SPI_AbortRx_ISR(SPI_HandleTypeDef *hspi) -{ - __IO uint32_t count; - - /* Disable SPI Peripheral */ - __HAL_SPI_DISABLE(hspi); - - count = SPI_DEFAULT_TIMEOUT * (SystemCoreClock / 24U / 1000U); - - /* Disable RXNEIE interrupt */ - CLEAR_BIT(hspi->Instance->CR2, (SPI_CR2_RXNEIE)); - - /* Check RXNEIE is disabled */ - do - { - if (count == 0U) - { - SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_ABORT); - break; - } - count--; - } while (HAL_IS_BIT_SET(hspi->Instance->CR2, SPI_CR2_RXNEIE)); - - /* Control the BSY flag */ - if (SPI_WaitFlagStateUntilTimeout(hspi, SPI_FLAG_BSY, RESET, SPI_DEFAULT_TIMEOUT, HAL_GetTick()) != HAL_OK) - { - hspi->ErrorCode = HAL_SPI_ERROR_ABORT; - } - - /* Empty the FRLVL fifo */ - if (SPI_WaitFifoStateUntilTimeout(hspi, SPI_FLAG_FRLVL, SPI_FRLVL_EMPTY, SPI_DEFAULT_TIMEOUT, HAL_GetTick()) != HAL_OK) - { - hspi->ErrorCode = HAL_SPI_ERROR_ABORT; - } - - hspi->State = HAL_SPI_STATE_ABORT; -} - -/** - * @brief Handle abort a Tx or Rx/Tx transaction. - * @param hspi pointer to a SPI_HandleTypeDef structure that contains - * the configuration information for SPI module. - * @retval None - */ -static void SPI_AbortTx_ISR(SPI_HandleTypeDef *hspi) -{ - __IO uint32_t count; - - count = SPI_DEFAULT_TIMEOUT * (SystemCoreClock / 24U / 1000U); - - /* Disable TXEIE interrupt */ - CLEAR_BIT(hspi->Instance->CR2, (SPI_CR2_TXEIE)); - - /* Check TXEIE is disabled */ - do - { - if (count == 0U) - { - SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_ABORT); - break; - } - count--; - } while (HAL_IS_BIT_SET(hspi->Instance->CR2, SPI_CR2_TXEIE)); - - if (SPI_EndRxTxTransaction(hspi, SPI_DEFAULT_TIMEOUT, HAL_GetTick()) != HAL_OK) - { - hspi->ErrorCode = HAL_SPI_ERROR_ABORT; - } - - /* Disable SPI Peripheral */ - __HAL_SPI_DISABLE(hspi); - - /* Empty the FRLVL fifo */ - if (SPI_WaitFifoStateUntilTimeout(hspi, SPI_FLAG_FRLVL, SPI_FRLVL_EMPTY, SPI_DEFAULT_TIMEOUT, HAL_GetTick()) != HAL_OK) - { - hspi->ErrorCode = HAL_SPI_ERROR_ABORT; - } - - /* Check case of Full-Duplex Mode and disable directly RXNEIE interrupt */ - if (HAL_IS_BIT_SET(hspi->Instance->CR2, SPI_CR2_RXNEIE)) - { - /* Disable RXNEIE interrupt */ - CLEAR_BIT(hspi->Instance->CR2, (SPI_CR2_RXNEIE)); - - /* Check RXNEIE is disabled */ - do - { - if (count == 0U) - { - SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_ABORT); - break; - } - count--; - } while (HAL_IS_BIT_SET(hspi->Instance->CR2, SPI_CR2_RXNEIE)); - - /* Control the BSY flag */ - if (SPI_WaitFlagStateUntilTimeout(hspi, SPI_FLAG_BSY, RESET, SPI_DEFAULT_TIMEOUT, HAL_GetTick()) != HAL_OK) - { - hspi->ErrorCode = HAL_SPI_ERROR_ABORT; - } - - /* Empty the FRLVL fifo */ - if (SPI_WaitFifoStateUntilTimeout(hspi, SPI_FLAG_FRLVL, SPI_FRLVL_EMPTY, SPI_DEFAULT_TIMEOUT, HAL_GetTick()) != HAL_OK) - { - hspi->ErrorCode = HAL_SPI_ERROR_ABORT; - } - } - hspi->State = HAL_SPI_STATE_ABORT; -} - -/** - * @} - */ - -#endif /* HAL_SPI_MODULE_ENABLED */ - -/** - * @} - */ - -/** - * @} - */ - +/** + ****************************************************************************** + * @file stm32l4xx_hal_spi.c + * @author MCD Application Team + * @brief SPI HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Serial Peripheral Interface (SPI) peripheral: + * + Initialization and de-initialization functions + * + IO operation functions + * + Peripheral Control functions + * + Peripheral State functions + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + The SPI HAL driver can be used as follows: + + (#) Declare a SPI_HandleTypeDef handle structure, for example: + SPI_HandleTypeDef hspi; + + (#)Initialize the SPI low level resources by implementing the HAL_SPI_MspInit() API: + (##) Enable the SPIx interface clock + (##) SPI pins configuration + (+++) Enable the clock for the SPI GPIOs + (+++) Configure these SPI pins as alternate function push-pull + (##) NVIC configuration if you need to use interrupt process + (+++) Configure the SPIx interrupt priority + (+++) Enable the NVIC SPI IRQ handle + (##) DMA Configuration if you need to use DMA process + (+++) Declare a DMA_HandleTypeDef handle structure for the transmit or receive Stream/Channel + (+++) Enable the DMAx clock + (+++) Configure the DMA handle parameters + (+++) Configure the DMA Tx or Rx Stream/Channel + (+++) Associate the initialized hdma_tx(or _rx) handle to the hspi DMA Tx or Rx handle + (+++) Configure the priority and enable the NVIC for the transfer complete interrupt on the DMA Tx + or Rx Stream/Channel + + (#) Program the Mode, BidirectionalMode , Data size, Baudrate Prescaler, NSS + management, Clock polarity and phase, FirstBit and CRC configuration in the hspi Init structure. + + (#) Initialize the SPI registers by calling the HAL_SPI_Init() API: + (++) This API configures also the low level Hardware GPIO, CLOCK, CORTEX...etc) + by calling the customized HAL_SPI_MspInit() API. + [..] + Circular mode restriction: + (#) The DMA circular mode cannot be used when the SPI is configured in these modes: + (##) Master 2Lines RxOnly + (##) Master 1Line Rx + (#) The CRC feature is not managed when the DMA circular mode is enabled + (#) When the SPI DMA Pause/Stop features are used, we must use the following APIs + the HAL_SPI_DMAPause()/ HAL_SPI_DMAStop() only under the SPI callbacks + [..] + Master Receive mode restriction: + (#) In Master unidirectional receive-only mode (MSTR =1, BIDIMODE=0, RXONLY=1) or + bidirectional receive mode (MSTR=1, BIDIMODE=1, BIDIOE=0), to ensure that the SPI + does not initiate a new transfer the following procedure has to be respected: + (##) HAL_SPI_DeInit() + (##) HAL_SPI_Init() + [..] + Callback registration: + + (#) The compilation flag USE_HAL_SPI_REGISTER_CALLBACKS when set to 1U + allows the user to configure dynamically the driver callbacks. + Use Functions HAL_SPI_RegisterCallback() to register an interrupt callback. + + Function HAL_SPI_RegisterCallback() allows to register following callbacks: + (++) TxCpltCallback : SPI Tx Completed callback + (++) RxCpltCallback : SPI Rx Completed callback + (++) TxRxCpltCallback : SPI TxRx Completed callback + (++) TxHalfCpltCallback : SPI Tx Half Completed callback + (++) RxHalfCpltCallback : SPI Rx Half Completed callback + (++) TxRxHalfCpltCallback : SPI TxRx Half Completed callback + (++) ErrorCallback : SPI Error callback + (++) AbortCpltCallback : SPI Abort callback + (++) MspInitCallback : SPI Msp Init callback + (++) MspDeInitCallback : SPI Msp DeInit callback + This function takes as parameters the HAL peripheral handle, the Callback ID + and a pointer to the user callback function. + + + (#) Use function HAL_SPI_UnRegisterCallback to reset a callback to the default + weak function. + HAL_SPI_UnRegisterCallback takes as parameters the HAL peripheral handle, + and the Callback ID. + This function allows to reset following callbacks: + (++) TxCpltCallback : SPI Tx Completed callback + (++) RxCpltCallback : SPI Rx Completed callback + (++) TxRxCpltCallback : SPI TxRx Completed callback + (++) TxHalfCpltCallback : SPI Tx Half Completed callback + (++) RxHalfCpltCallback : SPI Rx Half Completed callback + (++) TxRxHalfCpltCallback : SPI TxRx Half Completed callback + (++) ErrorCallback : SPI Error callback + (++) AbortCpltCallback : SPI Abort callback + (++) MspInitCallback : SPI Msp Init callback + (++) MspDeInitCallback : SPI Msp DeInit callback + + [..] + By default, after the HAL_SPI_Init() and when the state is HAL_SPI_STATE_RESET + all callbacks are set to the corresponding weak functions: + examples HAL_SPI_MasterTxCpltCallback(), HAL_SPI_MasterRxCpltCallback(). + Exception done for MspInit and MspDeInit functions that are + reset to the legacy weak functions in the HAL_SPI_Init()/ HAL_SPI_DeInit() only when + these callbacks are null (not registered beforehand). + If MspInit or MspDeInit are not null, the HAL_SPI_Init()/ HAL_SPI_DeInit() + keep and use the user MspInit/MspDeInit callbacks (registered beforehand) whatever the state. + + [..] + Callbacks can be registered/unregistered in HAL_SPI_STATE_READY state only. + Exception done MspInit/MspDeInit functions that can be registered/unregistered + in HAL_SPI_STATE_READY or HAL_SPI_STATE_RESET state, + thus registered (user) MspInit/DeInit callbacks can be used during the Init/DeInit. + Then, the user first registers the MspInit/MspDeInit user callbacks + using HAL_SPI_RegisterCallback() before calling HAL_SPI_DeInit() + or HAL_SPI_Init() function. + + [..] + When the compilation define USE_HAL_PPP_REGISTER_CALLBACKS is set to 0 or + not defined, the callback registering feature is not available + and weak (surcharged) callbacks are used. + + [..] + Using the HAL it is not possible to reach all supported SPI frequency with the different SPI Modes, + the following table resume the max SPI frequency reached with data size 8bits/16bits, + according to frequency of the APBx Peripheral Clock (fPCLK) used by the SPI instance. + + @endverbatim + + Additional table : + + DataSize = SPI_DATASIZE_8BIT: + +----------------------------------------------------------------------------------------------+ + | | | 2Lines Fullduplex | 2Lines RxOnly | 1Line | + | Process | Transfer mode |---------------------|----------------------|----------------------| + | | | Master | Slave | Master | Slave | Master | Slave | + |==============================================================================================| + | T | Polling | Fpclk/4 | Fpclk/8 | NA | NA | NA | NA | + | X |----------------|----------|----------|-----------|----------|-----------|----------| + | / | Interrupt | Fpclk/4 | Fpclk/16 | NA | NA | NA | NA | + | R |----------------|----------|----------|-----------|----------|-----------|----------| + | X | DMA | Fpclk/2 | Fpclk/2 | NA | NA | NA | NA | + |=========|================|==========|==========|===========|==========|===========|==========| + | | Polling | Fpclk/4 | Fpclk/8 | Fpclk/16 | Fpclk/8 | Fpclk/8 | Fpclk/8 | + | |----------------|----------|----------|-----------|----------|-----------|----------| + | R | Interrupt | Fpclk/8 | Fpclk/16 | Fpclk/8 | Fpclk/8 | Fpclk/8 | Fpclk/4 | + | X |----------------|----------|----------|-----------|----------|-----------|----------| + | | DMA | Fpclk/4 | Fpclk/2 | Fpclk/2 | Fpclk/16 | Fpclk/2 | Fpclk/16 | + |=========|================|==========|==========|===========|==========|===========|==========| + | | Polling | Fpclk/8 | Fpclk/2 | NA | NA | Fpclk/8 | Fpclk/8 | + | |----------------|----------|----------|-----------|----------|-----------|----------| + | T | Interrupt | Fpclk/2 | Fpclk/4 | NA | NA | Fpclk/16 | Fpclk/8 | + | X |----------------|----------|----------|-----------|----------|-----------|----------| + | | DMA | Fpclk/2 | Fpclk/2 | NA | NA | Fpclk/8 | Fpclk/16 | + +----------------------------------------------------------------------------------------------+ + + DataSize = SPI_DATASIZE_16BIT: + +----------------------------------------------------------------------------------------------+ + | | | 2Lines Fullduplex | 2Lines RxOnly | 1Line | + | Process | Transfer mode |---------------------|----------------------|----------------------| + | | | Master | Slave | Master | Slave | Master | Slave | + |==============================================================================================| + | T | Polling | Fpclk/4 | Fpclk/8 | NA | NA | NA | NA | + | X |----------------|----------|----------|-----------|----------|-----------|----------| + | / | Interrupt | Fpclk/4 | Fpclk/16 | NA | NA | NA | NA | + | R |----------------|----------|----------|-----------|----------|-----------|----------| + | X | DMA | Fpclk/2 | Fpclk/2 | NA | NA | NA | NA | + |=========|================|==========|==========|===========|==========|===========|==========| + | | Polling | Fpclk/4 | Fpclk/8 | Fpclk/16 | Fpclk/8 | Fpclk/8 | Fpclk/8 | + | |----------------|----------|----------|-----------|----------|-----------|----------| + | R | Interrupt | Fpclk/8 | Fpclk/16 | Fpclk/8 | Fpclk/8 | Fpclk/8 | Fpclk/4 | + | X |----------------|----------|----------|-----------|----------|-----------|----------| + | | DMA | Fpclk/4 | Fpclk/2 | Fpclk/2 | Fpclk/16 | Fpclk/2 | Fpclk/16 | + |=========|================|==========|==========|===========|==========|===========|==========| + | | Polling | Fpclk/8 | Fpclk/2 | NA | NA | Fpclk/8 | Fpclk/8 | + | |----------------|----------|----------|-----------|----------|-----------|----------| + | T | Interrupt | Fpclk/2 | Fpclk/4 | NA | NA | Fpclk/16 | Fpclk/8 | + | X |----------------|----------|----------|-----------|----------|-----------|----------| + | | DMA | Fpclk/2 | Fpclk/2 | NA | NA | Fpclk/8 | Fpclk/16 | + +----------------------------------------------------------------------------------------------+ + @note The max SPI frequency depend on SPI data size (4bits, 5bits,..., 8bits,...15bits, 16bits), + SPI mode(2 Lines fullduplex, 2 lines RxOnly, 1 line TX/RX) and Process mode (Polling, IT, DMA). + @note + (#) TX/RX processes are HAL_SPI_TransmitReceive(), HAL_SPI_TransmitReceive_IT() and + HAL_SPI_TransmitReceive_DMA() + (#) RX processes are HAL_SPI_Receive(), HAL_SPI_Receive_IT() and HAL_SPI_Receive_DMA() + (#) TX processes are HAL_SPI_Transmit(), HAL_SPI_Transmit_IT() and HAL_SPI_Transmit_DMA() + + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l4xx_hal.h" + +/** @addtogroup STM32L4xx_HAL_Driver + * @{ + */ + +/** @defgroup SPI SPI + * @brief SPI HAL module driver + * @{ + */ +#ifdef HAL_SPI_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private defines -----------------------------------------------------------*/ +/** @defgroup SPI_Private_Constants SPI Private Constants + * @{ + */ +#define SPI_DEFAULT_TIMEOUT 100U +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/** @defgroup SPI_Private_Functions SPI Private Functions + * @{ + */ +static void SPI_DMATransmitCplt(DMA_HandleTypeDef *hdma); +static void SPI_DMAReceiveCplt(DMA_HandleTypeDef *hdma); +static void SPI_DMATransmitReceiveCplt(DMA_HandleTypeDef *hdma); +static void SPI_DMAHalfTransmitCplt(DMA_HandleTypeDef *hdma); +static void SPI_DMAHalfReceiveCplt(DMA_HandleTypeDef *hdma); +static void SPI_DMAHalfTransmitReceiveCplt(DMA_HandleTypeDef *hdma); +static void SPI_DMAError(DMA_HandleTypeDef *hdma); +static void SPI_DMAAbortOnError(DMA_HandleTypeDef *hdma); +static void SPI_DMATxAbortCallback(DMA_HandleTypeDef *hdma); +static void SPI_DMARxAbortCallback(DMA_HandleTypeDef *hdma); +static HAL_StatusTypeDef SPI_WaitFlagStateUntilTimeout(SPI_HandleTypeDef *hspi, uint32_t Flag, FlagStatus State, + uint32_t Timeout, uint32_t Tickstart); +static HAL_StatusTypeDef SPI_WaitFifoStateUntilTimeout(SPI_HandleTypeDef *hspi, uint32_t Fifo, uint32_t State, + uint32_t Timeout, uint32_t Tickstart); +static void SPI_TxISR_8BIT(struct __SPI_HandleTypeDef *hspi); +static void SPI_TxISR_16BIT(struct __SPI_HandleTypeDef *hspi); +static void SPI_RxISR_8BIT(struct __SPI_HandleTypeDef *hspi); +static void SPI_RxISR_16BIT(struct __SPI_HandleTypeDef *hspi); +static void SPI_2linesRxISR_8BIT(struct __SPI_HandleTypeDef *hspi); +static void SPI_2linesTxISR_8BIT(struct __SPI_HandleTypeDef *hspi); +static void SPI_2linesTxISR_16BIT(struct __SPI_HandleTypeDef *hspi); +static void SPI_2linesRxISR_16BIT(struct __SPI_HandleTypeDef *hspi); +#if (USE_SPI_CRC != 0U) +static void SPI_RxISR_8BITCRC(struct __SPI_HandleTypeDef *hspi); +static void SPI_RxISR_16BITCRC(struct __SPI_HandleTypeDef *hspi); +static void SPI_2linesRxISR_8BITCRC(struct __SPI_HandleTypeDef *hspi); +static void SPI_2linesRxISR_16BITCRC(struct __SPI_HandleTypeDef *hspi); +#endif /* USE_SPI_CRC */ +static void SPI_AbortRx_ISR(SPI_HandleTypeDef *hspi); +static void SPI_AbortTx_ISR(SPI_HandleTypeDef *hspi); +static void SPI_CloseRxTx_ISR(SPI_HandleTypeDef *hspi); +static void SPI_CloseRx_ISR(SPI_HandleTypeDef *hspi); +static void SPI_CloseTx_ISR(SPI_HandleTypeDef *hspi); +static HAL_StatusTypeDef SPI_EndRxTransaction(SPI_HandleTypeDef *hspi, uint32_t Timeout, uint32_t Tickstart); +static HAL_StatusTypeDef SPI_EndRxTxTransaction(SPI_HandleTypeDef *hspi, uint32_t Timeout, uint32_t Tickstart); +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup SPI_Exported_Functions SPI Exported Functions + * @{ + */ + +/** @defgroup SPI_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and Configuration functions + * +@verbatim + =============================================================================== + ##### Initialization and de-initialization functions ##### + =============================================================================== + [..] This subsection provides a set of functions allowing to initialize and + de-initialize the SPIx peripheral: + + (+) User must implement HAL_SPI_MspInit() function in which he configures + all related peripherals resources (CLOCK, GPIO, DMA, IT and NVIC ). + + (+) Call the function HAL_SPI_Init() to configure the selected device with + the selected configuration: + (++) Mode + (++) Direction + (++) Data Size + (++) Clock Polarity and Phase + (++) NSS Management + (++) BaudRate Prescaler + (++) FirstBit + (++) TIMode + (++) CRC Calculation + (++) CRC Polynomial if CRC enabled + (++) CRC Length, used only with Data8 and Data16 + (++) FIFO reception threshold + + (+) Call the function HAL_SPI_DeInit() to restore the default configuration + of the selected SPIx peripheral. + +@endverbatim + * @{ + */ + +/** + * @brief Initialize the SPI according to the specified parameters + * in the SPI_InitTypeDef and initialize the associated handle. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SPI_Init(SPI_HandleTypeDef *hspi) +{ + uint32_t frxth; + + /* Check the SPI handle allocation */ + if (hspi == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_SPI_ALL_INSTANCE(hspi->Instance)); + assert_param(IS_SPI_MODE(hspi->Init.Mode)); + assert_param(IS_SPI_DIRECTION(hspi->Init.Direction)); + assert_param(IS_SPI_DATASIZE(hspi->Init.DataSize)); + assert_param(IS_SPI_NSS(hspi->Init.NSS)); + assert_param(IS_SPI_NSSP(hspi->Init.NSSPMode)); + assert_param(IS_SPI_BAUDRATE_PRESCALER(hspi->Init.BaudRatePrescaler)); + assert_param(IS_SPI_FIRST_BIT(hspi->Init.FirstBit)); + assert_param(IS_SPI_TIMODE(hspi->Init.TIMode)); + if (hspi->Init.TIMode == SPI_TIMODE_DISABLE) + { + assert_param(IS_SPI_CPOL(hspi->Init.CLKPolarity)); + assert_param(IS_SPI_CPHA(hspi->Init.CLKPhase)); + + if (hspi->Init.Mode == SPI_MODE_MASTER) + { + assert_param(IS_SPI_BAUDRATE_PRESCALER(hspi->Init.BaudRatePrescaler)); + } + else + { + /* Baudrate prescaler not use in Motoraola Slave mode. force to default value */ + hspi->Init.BaudRatePrescaler = SPI_BAUDRATEPRESCALER_2; + } + } + else + { + assert_param(IS_SPI_BAUDRATE_PRESCALER(hspi->Init.BaudRatePrescaler)); + + /* Force polarity and phase to TI protocaol requirements */ + hspi->Init.CLKPolarity = SPI_POLARITY_LOW; + hspi->Init.CLKPhase = SPI_PHASE_1EDGE; + } +#if (USE_SPI_CRC != 0U) + assert_param(IS_SPI_CRC_CALCULATION(hspi->Init.CRCCalculation)); + if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + assert_param(IS_SPI_CRC_POLYNOMIAL(hspi->Init.CRCPolynomial)); + assert_param(IS_SPI_CRC_LENGTH(hspi->Init.CRCLength)); + } +#else + hspi->Init.CRCCalculation = SPI_CRCCALCULATION_DISABLE; +#endif /* USE_SPI_CRC */ + + if (hspi->State == HAL_SPI_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + hspi->Lock = HAL_UNLOCKED; + +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) + /* Init the SPI Callback settings */ + hspi->TxCpltCallback = HAL_SPI_TxCpltCallback; /* Legacy weak TxCpltCallback */ + hspi->RxCpltCallback = HAL_SPI_RxCpltCallback; /* Legacy weak RxCpltCallback */ + hspi->TxRxCpltCallback = HAL_SPI_TxRxCpltCallback; /* Legacy weak TxRxCpltCallback */ + hspi->TxHalfCpltCallback = HAL_SPI_TxHalfCpltCallback; /* Legacy weak TxHalfCpltCallback */ + hspi->RxHalfCpltCallback = HAL_SPI_RxHalfCpltCallback; /* Legacy weak RxHalfCpltCallback */ + hspi->TxRxHalfCpltCallback = HAL_SPI_TxRxHalfCpltCallback; /* Legacy weak TxRxHalfCpltCallback */ + hspi->ErrorCallback = HAL_SPI_ErrorCallback; /* Legacy weak ErrorCallback */ + hspi->AbortCpltCallback = HAL_SPI_AbortCpltCallback; /* Legacy weak AbortCpltCallback */ + + if (hspi->MspInitCallback == NULL) + { + hspi->MspInitCallback = HAL_SPI_MspInit; /* Legacy weak MspInit */ + } + + /* Init the low level hardware : GPIO, CLOCK, NVIC... */ + hspi->MspInitCallback(hspi); +#else + /* Init the low level hardware : GPIO, CLOCK, NVIC... */ + HAL_SPI_MspInit(hspi); +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ + } + + hspi->State = HAL_SPI_STATE_BUSY; + + /* Disable the selected SPI peripheral */ + __HAL_SPI_DISABLE(hspi); + + /* Align by default the rs fifo threshold on the data size */ + if (hspi->Init.DataSize > SPI_DATASIZE_8BIT) + { + frxth = SPI_RXFIFO_THRESHOLD_HF; + } + else + { + frxth = SPI_RXFIFO_THRESHOLD_QF; + } + + /* CRC calculation is valid only for 16Bit and 8 Bit */ + if ((hspi->Init.DataSize != SPI_DATASIZE_16BIT) && (hspi->Init.DataSize != SPI_DATASIZE_8BIT)) + { + /* CRC must be disabled */ + hspi->Init.CRCCalculation = SPI_CRCCALCULATION_DISABLE; + } + + /*----------------------- SPIx CR1 & CR2 Configuration ---------------------*/ + /* Configure : SPI Mode, Communication Mode, Clock polarity and phase, NSS management, + Communication speed, First bit and CRC calculation state */ + WRITE_REG(hspi->Instance->CR1, ((hspi->Init.Mode & (SPI_CR1_MSTR | SPI_CR1_SSI)) | + (hspi->Init.Direction & (SPI_CR1_RXONLY | SPI_CR1_BIDIMODE)) | + (hspi->Init.CLKPolarity & SPI_CR1_CPOL) | + (hspi->Init.CLKPhase & SPI_CR1_CPHA) | + (hspi->Init.NSS & SPI_CR1_SSM) | + (hspi->Init.BaudRatePrescaler & SPI_CR1_BR_Msk) | + (hspi->Init.FirstBit & SPI_CR1_LSBFIRST) | + (hspi->Init.CRCCalculation & SPI_CR1_CRCEN))); +#if (USE_SPI_CRC != 0U) + /*---------------------------- SPIx CRCL Configuration -------------------*/ + if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + /* Align the CRC Length on the data size */ + if (hspi->Init.CRCLength == SPI_CRC_LENGTH_DATASIZE) + { + /* CRC Length aligned on the data size : value set by default */ + if (hspi->Init.DataSize > SPI_DATASIZE_8BIT) + { + hspi->Init.CRCLength = SPI_CRC_LENGTH_16BIT; + } + else + { + hspi->Init.CRCLength = SPI_CRC_LENGTH_8BIT; + } + } + + /* Configure : CRC Length */ + if (hspi->Init.CRCLength == SPI_CRC_LENGTH_16BIT) + { + SET_BIT(hspi->Instance->CR1, SPI_CR1_CRCL); + } + } +#endif /* USE_SPI_CRC */ + + /* Configure : NSS management, TI Mode, NSS Pulse, Data size and Rx Fifo threshold */ + WRITE_REG(hspi->Instance->CR2, (((hspi->Init.NSS >> 16U) & SPI_CR2_SSOE) | + (hspi->Init.TIMode & SPI_CR2_FRF) | + (hspi->Init.NSSPMode & SPI_CR2_NSSP) | + (hspi->Init.DataSize & SPI_CR2_DS_Msk) | + (frxth & SPI_CR2_FRXTH))); + +#if (USE_SPI_CRC != 0U) + /*---------------------------- SPIx CRCPOLY Configuration ------------------*/ + /* Configure : CRC Polynomial */ + if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + WRITE_REG(hspi->Instance->CRCPR, (hspi->Init.CRCPolynomial & SPI_CRCPR_CRCPOLY_Msk)); + } +#endif /* USE_SPI_CRC */ + +#if defined(SPI_I2SCFGR_I2SMOD) + /* Activate the SPI mode (Make sure that I2SMOD bit in I2SCFGR register is reset) */ + CLEAR_BIT(hspi->Instance->I2SCFGR, SPI_I2SCFGR_I2SMOD); +#endif /* SPI_I2SCFGR_I2SMOD */ + + hspi->ErrorCode = HAL_SPI_ERROR_NONE; + hspi->State = HAL_SPI_STATE_READY; + + return HAL_OK; +} + +/** + * @brief De-Initialize the SPI peripheral. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SPI_DeInit(SPI_HandleTypeDef *hspi) +{ + /* Check the SPI handle allocation */ + if (hspi == NULL) + { + return HAL_ERROR; + } + + /* Check SPI Instance parameter */ + assert_param(IS_SPI_ALL_INSTANCE(hspi->Instance)); + + hspi->State = HAL_SPI_STATE_BUSY; + + /* Disable the SPI Peripheral Clock */ + __HAL_SPI_DISABLE(hspi); + +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) + if (hspi->MspDeInitCallback == NULL) + { + hspi->MspDeInitCallback = HAL_SPI_MspDeInit; /* Legacy weak MspDeInit */ + } + + /* DeInit the low level hardware: GPIO, CLOCK, NVIC... */ + hspi->MspDeInitCallback(hspi); +#else + /* DeInit the low level hardware: GPIO, CLOCK, NVIC... */ + HAL_SPI_MspDeInit(hspi); +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ + + hspi->ErrorCode = HAL_SPI_ERROR_NONE; + hspi->State = HAL_SPI_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(hspi); + + return HAL_OK; +} + +/** + * @brief Initialize the SPI MSP. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval None + */ +__weak void HAL_SPI_MspInit(SPI_HandleTypeDef *hspi) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hspi); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SPI_MspInit should be implemented in the user file + */ +} + +/** + * @brief De-Initialize the SPI MSP. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval None + */ +__weak void HAL_SPI_MspDeInit(SPI_HandleTypeDef *hspi) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hspi); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SPI_MspDeInit should be implemented in the user file + */ +} + +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) +/** + * @brief Register a User SPI Callback + * To be used instead of the weak predefined callback + * @param hspi Pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for the specified SPI. + * @param CallbackID ID of the callback to be registered + * @param pCallback pointer to the Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SPI_RegisterCallback(SPI_HandleTypeDef *hspi, HAL_SPI_CallbackIDTypeDef CallbackID, + pSPI_CallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + hspi->ErrorCode |= HAL_SPI_ERROR_INVALID_CALLBACK; + + return HAL_ERROR; + } + /* Process locked */ + __HAL_LOCK(hspi); + + if (HAL_SPI_STATE_READY == hspi->State) + { + switch (CallbackID) + { + case HAL_SPI_TX_COMPLETE_CB_ID : + hspi->TxCpltCallback = pCallback; + break; + + case HAL_SPI_RX_COMPLETE_CB_ID : + hspi->RxCpltCallback = pCallback; + break; + + case HAL_SPI_TX_RX_COMPLETE_CB_ID : + hspi->TxRxCpltCallback = pCallback; + break; + + case HAL_SPI_TX_HALF_COMPLETE_CB_ID : + hspi->TxHalfCpltCallback = pCallback; + break; + + case HAL_SPI_RX_HALF_COMPLETE_CB_ID : + hspi->RxHalfCpltCallback = pCallback; + break; + + case HAL_SPI_TX_RX_HALF_COMPLETE_CB_ID : + hspi->TxRxHalfCpltCallback = pCallback; + break; + + case HAL_SPI_ERROR_CB_ID : + hspi->ErrorCallback = pCallback; + break; + + case HAL_SPI_ABORT_CB_ID : + hspi->AbortCpltCallback = pCallback; + break; + + case HAL_SPI_MSPINIT_CB_ID : + hspi->MspInitCallback = pCallback; + break; + + case HAL_SPI_MSPDEINIT_CB_ID : + hspi->MspDeInitCallback = pCallback; + break; + + default : + /* Update the error code */ + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_INVALID_CALLBACK); + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (HAL_SPI_STATE_RESET == hspi->State) + { + switch (CallbackID) + { + case HAL_SPI_MSPINIT_CB_ID : + hspi->MspInitCallback = pCallback; + break; + + case HAL_SPI_MSPDEINIT_CB_ID : + hspi->MspDeInitCallback = pCallback; + break; + + default : + /* Update the error code */ + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_INVALID_CALLBACK); + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_INVALID_CALLBACK); + + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hspi); + return status; +} + +/** + * @brief Unregister an SPI Callback + * SPI callback is redirected to the weak predefined callback + * @param hspi Pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for the specified SPI. + * @param CallbackID ID of the callback to be unregistered + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SPI_UnRegisterCallback(SPI_HandleTypeDef *hspi, HAL_SPI_CallbackIDTypeDef CallbackID) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process locked */ + __HAL_LOCK(hspi); + + if (HAL_SPI_STATE_READY == hspi->State) + { + switch (CallbackID) + { + case HAL_SPI_TX_COMPLETE_CB_ID : + hspi->TxCpltCallback = HAL_SPI_TxCpltCallback; /* Legacy weak TxCpltCallback */ + break; + + case HAL_SPI_RX_COMPLETE_CB_ID : + hspi->RxCpltCallback = HAL_SPI_RxCpltCallback; /* Legacy weak RxCpltCallback */ + break; + + case HAL_SPI_TX_RX_COMPLETE_CB_ID : + hspi->TxRxCpltCallback = HAL_SPI_TxRxCpltCallback; /* Legacy weak TxRxCpltCallback */ + break; + + case HAL_SPI_TX_HALF_COMPLETE_CB_ID : + hspi->TxHalfCpltCallback = HAL_SPI_TxHalfCpltCallback; /* Legacy weak TxHalfCpltCallback */ + break; + + case HAL_SPI_RX_HALF_COMPLETE_CB_ID : + hspi->RxHalfCpltCallback = HAL_SPI_RxHalfCpltCallback; /* Legacy weak RxHalfCpltCallback */ + break; + + case HAL_SPI_TX_RX_HALF_COMPLETE_CB_ID : + hspi->TxRxHalfCpltCallback = HAL_SPI_TxRxHalfCpltCallback; /* Legacy weak TxRxHalfCpltCallback */ + break; + + case HAL_SPI_ERROR_CB_ID : + hspi->ErrorCallback = HAL_SPI_ErrorCallback; /* Legacy weak ErrorCallback */ + break; + + case HAL_SPI_ABORT_CB_ID : + hspi->AbortCpltCallback = HAL_SPI_AbortCpltCallback; /* Legacy weak AbortCpltCallback */ + break; + + case HAL_SPI_MSPINIT_CB_ID : + hspi->MspInitCallback = HAL_SPI_MspInit; /* Legacy weak MspInit */ + break; + + case HAL_SPI_MSPDEINIT_CB_ID : + hspi->MspDeInitCallback = HAL_SPI_MspDeInit; /* Legacy weak MspDeInit */ + break; + + default : + /* Update the error code */ + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_INVALID_CALLBACK); + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (HAL_SPI_STATE_RESET == hspi->State) + { + switch (CallbackID) + { + case HAL_SPI_MSPINIT_CB_ID : + hspi->MspInitCallback = HAL_SPI_MspInit; /* Legacy weak MspInit */ + break; + + case HAL_SPI_MSPDEINIT_CB_ID : + hspi->MspDeInitCallback = HAL_SPI_MspDeInit; /* Legacy weak MspDeInit */ + break; + + default : + /* Update the error code */ + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_INVALID_CALLBACK); + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_INVALID_CALLBACK); + + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hspi); + return status; +} +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ +/** + * @} + */ + +/** @defgroup SPI_Exported_Functions_Group2 IO operation functions + * @brief Data transfers functions + * +@verbatim + ============================================================================== + ##### IO operation functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to manage the SPI + data transfers. + + [..] The SPI supports master and slave mode : + + (#) There are two modes of transfer: + (++) Blocking mode: The communication is performed in polling mode. + The HAL status of all data processing is returned by the same function + after finishing transfer. + (++) No-Blocking mode: The communication is performed using Interrupts + or DMA, These APIs return the HAL status. + The end of the data processing will be indicated through the + dedicated SPI IRQ when using Interrupt mode or the DMA IRQ when + using DMA mode. + The HAL_SPI_TxCpltCallback(), HAL_SPI_RxCpltCallback() and HAL_SPI_TxRxCpltCallback() user callbacks + will be executed respectively at the end of the transmit or Receive process + The HAL_SPI_ErrorCallback()user callback will be executed when a communication error is detected + + (#) APIs provided for these 2 transfer modes (Blocking mode or Non blocking mode using either Interrupt or DMA) + exist for 1Line (simplex) and 2Lines (full duplex) modes. + +@endverbatim + * @{ + */ + +/** + * @brief Transmit an amount of data in blocking mode. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @param pData pointer to data buffer + * @param Size amount of data to be sent + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SPI_Transmit(SPI_HandleTypeDef *hspi, const uint8_t *pData, uint16_t Size, uint32_t Timeout) +{ + uint32_t tickstart; + uint16_t initial_TxXferCount; + + /* Check Direction parameter */ + assert_param(IS_SPI_DIRECTION_2LINES_OR_1LINE(hspi->Init.Direction)); + + /* Init tickstart for timeout management*/ + tickstart = HAL_GetTick(); + initial_TxXferCount = Size; + + if (hspi->State != HAL_SPI_STATE_READY) + { + return HAL_BUSY; + } + + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* Process Locked */ + __HAL_LOCK(hspi); + + /* Set the transaction information */ + hspi->State = HAL_SPI_STATE_BUSY_TX; + hspi->ErrorCode = HAL_SPI_ERROR_NONE; + hspi->pTxBuffPtr = (const uint8_t *)pData; + hspi->TxXferSize = Size; + hspi->TxXferCount = Size; + + /*Init field not used in handle to zero */ + hspi->pRxBuffPtr = (uint8_t *)NULL; + hspi->RxXferSize = 0U; + hspi->RxXferCount = 0U; + hspi->TxISR = NULL; + hspi->RxISR = NULL; + + /* Configure communication direction : 1Line */ + if (hspi->Init.Direction == SPI_DIRECTION_1LINE) + { + /* Disable SPI Peripheral before set 1Line direction (BIDIOE bit) */ + __HAL_SPI_DISABLE(hspi); + SPI_1LINE_TX(hspi); + } + +#if (USE_SPI_CRC != 0U) + /* Reset CRC Calculation */ + if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + SPI_RESET_CRC(hspi); + } +#endif /* USE_SPI_CRC */ + + /* Check if the SPI is already enabled */ + if ((hspi->Instance->CR1 & SPI_CR1_SPE) != SPI_CR1_SPE) + { + /* Enable SPI peripheral */ + __HAL_SPI_ENABLE(hspi); + } + + /* Transmit data in 16 Bit mode */ + if (hspi->Init.DataSize > SPI_DATASIZE_8BIT) + { + if ((hspi->Init.Mode == SPI_MODE_SLAVE) || (initial_TxXferCount == 0x01U)) + { + hspi->Instance->DR = *((const uint16_t *)hspi->pTxBuffPtr); + hspi->pTxBuffPtr += sizeof(uint16_t); + hspi->TxXferCount--; + } + /* Transmit data in 16 Bit mode */ + while (hspi->TxXferCount > 0U) + { + /* Wait until TXE flag is set to send data */ + if (__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_TXE)) + { + hspi->Instance->DR = *((const uint16_t *)hspi->pTxBuffPtr); + hspi->pTxBuffPtr += sizeof(uint16_t); + hspi->TxXferCount--; + } + else + { + /* Timeout management */ + if ((((HAL_GetTick() - tickstart) >= Timeout) && (Timeout != HAL_MAX_DELAY)) || (Timeout == 0U)) + { + hspi->State = HAL_SPI_STATE_READY; + __HAL_UNLOCK(hspi); + return HAL_TIMEOUT; + } + } + } + } + /* Transmit data in 8 Bit mode */ + else + { + if ((hspi->Init.Mode == SPI_MODE_SLAVE) || (initial_TxXferCount == 0x01U)) + { + if (hspi->TxXferCount > 1U) + { + /* write on the data register in packing mode */ + hspi->Instance->DR = *((const uint16_t *)hspi->pTxBuffPtr); + hspi->pTxBuffPtr += sizeof(uint16_t); + hspi->TxXferCount -= 2U; + } + else + { + *((__IO uint8_t *)&hspi->Instance->DR) = *((const uint8_t *)hspi->pTxBuffPtr); + hspi->pTxBuffPtr ++; + hspi->TxXferCount--; + } + } + while (hspi->TxXferCount > 0U) + { + /* Wait until TXE flag is set to send data */ + if (__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_TXE)) + { + if (hspi->TxXferCount > 1U) + { + /* write on the data register in packing mode */ + hspi->Instance->DR = *((const uint16_t *)hspi->pTxBuffPtr); + hspi->pTxBuffPtr += sizeof(uint16_t); + hspi->TxXferCount -= 2U; + } + else + { + *((__IO uint8_t *)&hspi->Instance->DR) = *((const uint8_t *)hspi->pTxBuffPtr); + hspi->pTxBuffPtr++; + hspi->TxXferCount--; + } + } + else + { + /* Timeout management */ + if ((((HAL_GetTick() - tickstart) >= Timeout) && (Timeout != HAL_MAX_DELAY)) || (Timeout == 0U)) + { + hspi->State = HAL_SPI_STATE_READY; + __HAL_UNLOCK(hspi); + return HAL_TIMEOUT; + } + } + } + } +#if (USE_SPI_CRC != 0U) + /* Enable CRC Transmission */ + if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + SET_BIT(hspi->Instance->CR1, SPI_CR1_CRCNEXT); + } +#endif /* USE_SPI_CRC */ + + /* Check the end of the transaction */ + if (SPI_EndRxTxTransaction(hspi, Timeout, tickstart) != HAL_OK) + { + hspi->ErrorCode = HAL_SPI_ERROR_FLAG; + } + + /* Clear overrun flag in 2 Lines communication mode because received is not read */ + if (hspi->Init.Direction == SPI_DIRECTION_2LINES) + { + __HAL_SPI_CLEAR_OVRFLAG(hspi); + } + + hspi->State = HAL_SPI_STATE_READY; + /* Process Unlocked */ + __HAL_UNLOCK(hspi); + + if (hspi->ErrorCode != HAL_SPI_ERROR_NONE) + { + return HAL_ERROR; + } + else + { + return HAL_OK; + } +} + +/** + * @brief Receive an amount of data in blocking mode. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @param pData pointer to data buffer + * @param Size amount of data to be received + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SPI_Receive(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size, uint32_t Timeout) +{ +#if (USE_SPI_CRC != 0U) + __IO uint32_t tmpreg = 0U; + __IO uint8_t *ptmpreg8; + __IO uint8_t tmpreg8 = 0; +#endif /* USE_SPI_CRC */ + uint32_t tickstart; + + if (hspi->State != HAL_SPI_STATE_READY) + { + return HAL_BUSY; + } + + if ((hspi->Init.Mode == SPI_MODE_MASTER) && (hspi->Init.Direction == SPI_DIRECTION_2LINES)) + { + hspi->State = HAL_SPI_STATE_BUSY_RX; + /* Call transmit-receive function to send Dummy data on Tx line and generate clock on CLK line */ + return HAL_SPI_TransmitReceive(hspi, pData, pData, Size, Timeout); + } + + /* Init tickstart for timeout management*/ + tickstart = HAL_GetTick(); + + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* Process Locked */ + __HAL_LOCK(hspi); + + /* Set the transaction information */ + hspi->State = HAL_SPI_STATE_BUSY_RX; + hspi->ErrorCode = HAL_SPI_ERROR_NONE; + hspi->pRxBuffPtr = (uint8_t *)pData; + hspi->RxXferSize = Size; + hspi->RxXferCount = Size; + + /*Init field not used in handle to zero */ + hspi->pTxBuffPtr = (uint8_t *)NULL; + hspi->TxXferSize = 0U; + hspi->TxXferCount = 0U; + hspi->RxISR = NULL; + hspi->TxISR = NULL; + +#if (USE_SPI_CRC != 0U) + /* Reset CRC Calculation */ + if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + SPI_RESET_CRC(hspi); + /* this is done to handle the CRCNEXT before the latest data */ + hspi->RxXferCount--; + } +#endif /* USE_SPI_CRC */ + + /* Set the Rx Fifo threshold */ + if (hspi->Init.DataSize > SPI_DATASIZE_8BIT) + { + /* Set RX Fifo threshold according the reception data length: 16bit */ + CLEAR_BIT(hspi->Instance->CR2, SPI_RXFIFO_THRESHOLD); + } + else + { + /* Set RX Fifo threshold according the reception data length: 8bit */ + SET_BIT(hspi->Instance->CR2, SPI_RXFIFO_THRESHOLD); + } + + /* Configure communication direction: 1Line */ + if (hspi->Init.Direction == SPI_DIRECTION_1LINE) + { + /* Disable SPI Peripheral before set 1Line direction (BIDIOE bit) */ + __HAL_SPI_DISABLE(hspi); + SPI_1LINE_RX(hspi); + } + + /* Check if the SPI is already enabled */ + if ((hspi->Instance->CR1 & SPI_CR1_SPE) != SPI_CR1_SPE) + { + /* Enable SPI peripheral */ + __HAL_SPI_ENABLE(hspi); + } + + /* Receive data in 8 Bit mode */ + if (hspi->Init.DataSize <= SPI_DATASIZE_8BIT) + { + /* Transfer loop */ + while (hspi->RxXferCount > 0U) + { + /* Check the RXNE flag */ + if (__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_RXNE)) + { + /* read the received data */ + (* (uint8_t *)hspi->pRxBuffPtr) = *(__IO uint8_t *)&hspi->Instance->DR; + hspi->pRxBuffPtr += sizeof(uint8_t); + hspi->RxXferCount--; + } + else + { + /* Timeout management */ + if ((((HAL_GetTick() - tickstart) >= Timeout) && (Timeout != HAL_MAX_DELAY)) || (Timeout == 0U)) + { + hspi->State = HAL_SPI_STATE_READY; + __HAL_UNLOCK(hspi); + return HAL_TIMEOUT; + } + } + } + } + else + { + /* Transfer loop */ + while (hspi->RxXferCount > 0U) + { + /* Check the RXNE flag */ + if (__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_RXNE)) + { + *((uint16_t *)hspi->pRxBuffPtr) = (uint16_t)hspi->Instance->DR; + hspi->pRxBuffPtr += sizeof(uint16_t); + hspi->RxXferCount--; + } + else + { + /* Timeout management */ + if ((((HAL_GetTick() - tickstart) >= Timeout) && (Timeout != HAL_MAX_DELAY)) || (Timeout == 0U)) + { + hspi->State = HAL_SPI_STATE_READY; + __HAL_UNLOCK(hspi); + return HAL_TIMEOUT; + } + } + } + } + +#if (USE_SPI_CRC != 0U) + /* Handle the CRC Transmission */ + if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + /* freeze the CRC before the latest data */ + SET_BIT(hspi->Instance->CR1, SPI_CR1_CRCNEXT); + + /* Read the latest data */ + if (SPI_WaitFlagStateUntilTimeout(hspi, SPI_FLAG_RXNE, SET, Timeout, tickstart) != HAL_OK) + { + /* the latest data has not been received */ + __HAL_UNLOCK(hspi); + return HAL_TIMEOUT; + } + + /* Receive last data in 16 Bit mode */ + if (hspi->Init.DataSize > SPI_DATASIZE_8BIT) + { + *((uint16_t *)hspi->pRxBuffPtr) = (uint16_t)hspi->Instance->DR; + } + /* Receive last data in 8 Bit mode */ + else + { + (*(uint8_t *)hspi->pRxBuffPtr) = *(__IO uint8_t *)&hspi->Instance->DR; + } + + /* Wait the CRC data */ + if (SPI_WaitFlagStateUntilTimeout(hspi, SPI_FLAG_RXNE, SET, Timeout, tickstart) != HAL_OK) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_CRC); + hspi->State = HAL_SPI_STATE_READY; + __HAL_UNLOCK(hspi); + return HAL_TIMEOUT; + } + + /* Read CRC to Flush DR and RXNE flag */ + if (hspi->Init.DataSize == SPI_DATASIZE_16BIT) + { + /* Read 16bit CRC */ + tmpreg = READ_REG(hspi->Instance->DR); + /* To avoid GCC warning */ + UNUSED(tmpreg); + } + else + { + /* Initialize the 8bit temporary pointer */ + ptmpreg8 = (__IO uint8_t *)&hspi->Instance->DR; + /* Read 8bit CRC */ + tmpreg8 = *ptmpreg8; + /* To avoid GCC warning */ + UNUSED(tmpreg8); + + if ((hspi->Init.DataSize == SPI_DATASIZE_8BIT) && (hspi->Init.CRCLength == SPI_CRC_LENGTH_16BIT)) + { + if (SPI_WaitFlagStateUntilTimeout(hspi, SPI_FLAG_RXNE, SET, Timeout, tickstart) != HAL_OK) + { + /* Error on the CRC reception */ + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_CRC); + hspi->State = HAL_SPI_STATE_READY; + __HAL_UNLOCK(hspi); + return HAL_TIMEOUT; + } + /* Read 8bit CRC again in case of 16bit CRC in 8bit Data mode */ + tmpreg8 = *ptmpreg8; + /* To avoid GCC warning */ + UNUSED(tmpreg8); + } + } + } +#endif /* USE_SPI_CRC */ + + /* Check the end of the transaction */ + if (SPI_EndRxTransaction(hspi, Timeout, tickstart) != HAL_OK) + { + hspi->ErrorCode = HAL_SPI_ERROR_FLAG; + } + +#if (USE_SPI_CRC != 0U) + /* Check if CRC error occurred */ + if (__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_CRCERR)) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_CRC); + __HAL_SPI_CLEAR_CRCERRFLAG(hspi); + } +#endif /* USE_SPI_CRC */ + + hspi->State = HAL_SPI_STATE_READY; + /* Unlock the process */ + __HAL_UNLOCK(hspi); + if (hspi->ErrorCode != HAL_SPI_ERROR_NONE) + { + return HAL_ERROR; + } + else + { + return HAL_OK; + } +} + +/** + * @brief Transmit and Receive an amount of data in blocking mode. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @param pTxData pointer to transmission data buffer + * @param pRxData pointer to reception data buffer + * @param Size amount of data to be sent and received + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SPI_TransmitReceive(SPI_HandleTypeDef *hspi, const uint8_t *pTxData, uint8_t *pRxData, + uint16_t Size, uint32_t Timeout) +{ + uint16_t initial_TxXferCount; + uint16_t initial_RxXferCount; + uint32_t tmp_mode; + HAL_SPI_StateTypeDef tmp_state; + uint32_t tickstart; +#if (USE_SPI_CRC != 0U) + __IO uint32_t tmpreg = 0U; + uint32_t spi_cr1; + uint32_t spi_cr2; + __IO uint8_t *ptmpreg8; + __IO uint8_t tmpreg8 = 0; +#endif /* USE_SPI_CRC */ + + /* Variable used to alternate Rx and Tx during transfer */ + uint32_t txallowed = 1U; + + /* Check Direction parameter */ + assert_param(IS_SPI_DIRECTION_2LINES(hspi->Init.Direction)); + + /* Init tickstart for timeout management*/ + tickstart = HAL_GetTick(); + + /* Init temporary variables */ + tmp_state = hspi->State; + tmp_mode = hspi->Init.Mode; + initial_TxXferCount = Size; + initial_RxXferCount = Size; +#if (USE_SPI_CRC != 0U) + spi_cr1 = READ_REG(hspi->Instance->CR1); + spi_cr2 = READ_REG(hspi->Instance->CR2); +#endif /* USE_SPI_CRC */ + + if (!((tmp_state == HAL_SPI_STATE_READY) || \ + ((tmp_mode == SPI_MODE_MASTER) && (hspi->Init.Direction == SPI_DIRECTION_2LINES) && + (tmp_state == HAL_SPI_STATE_BUSY_RX)))) + { + return HAL_BUSY; + } + + if ((pTxData == NULL) || (pRxData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* Process Locked */ + __HAL_LOCK(hspi); + + /* Don't overwrite in case of HAL_SPI_STATE_BUSY_RX */ + if (hspi->State != HAL_SPI_STATE_BUSY_RX) + { + hspi->State = HAL_SPI_STATE_BUSY_TX_RX; + } + + /* Set the transaction information */ + hspi->ErrorCode = HAL_SPI_ERROR_NONE; + hspi->pRxBuffPtr = (uint8_t *)pRxData; + hspi->RxXferCount = Size; + hspi->RxXferSize = Size; + hspi->pTxBuffPtr = (const uint8_t *)pTxData; + hspi->TxXferCount = Size; + hspi->TxXferSize = Size; + + /*Init field not used in handle to zero */ + hspi->RxISR = NULL; + hspi->TxISR = NULL; + +#if (USE_SPI_CRC != 0U) + /* Reset CRC Calculation */ + if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + SPI_RESET_CRC(hspi); + } +#endif /* USE_SPI_CRC */ + + /* Set the Rx Fifo threshold */ + if ((hspi->Init.DataSize > SPI_DATASIZE_8BIT) || (initial_RxXferCount > 1U)) + { + /* Set fiforxthreshold according the reception data length: 16bit */ + CLEAR_BIT(hspi->Instance->CR2, SPI_RXFIFO_THRESHOLD); + } + else + { + /* Set fiforxthreshold according the reception data length: 8bit */ + SET_BIT(hspi->Instance->CR2, SPI_RXFIFO_THRESHOLD); + } + + /* Check if the SPI is already enabled */ + if ((hspi->Instance->CR1 & SPI_CR1_SPE) != SPI_CR1_SPE) + { + /* Enable SPI peripheral */ + __HAL_SPI_ENABLE(hspi); + } + + /* Transmit and Receive data in 16 Bit mode */ + if (hspi->Init.DataSize > SPI_DATASIZE_8BIT) + { + if ((hspi->Init.Mode == SPI_MODE_SLAVE) || (initial_TxXferCount == 0x01U)) + { + hspi->Instance->DR = *((const uint16_t *)hspi->pTxBuffPtr); + hspi->pTxBuffPtr += sizeof(uint16_t); + hspi->TxXferCount--; + +#if (USE_SPI_CRC != 0U) + /* Enable CRC Transmission */ + if ((hspi->TxXferCount == 0U) && (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)) + { + /* Set NSS Soft to received correctly the CRC on slave mode with NSS pulse activated */ + if ((READ_BIT(spi_cr1, SPI_CR1_MSTR) == 0U) && (READ_BIT(spi_cr2, SPI_CR2_NSSP) == SPI_CR2_NSSP)) + { + SET_BIT(hspi->Instance->CR1, SPI_CR1_SSM); + } + SET_BIT(hspi->Instance->CR1, SPI_CR1_CRCNEXT); + } +#endif /* USE_SPI_CRC */ + + } + while ((hspi->TxXferCount > 0U) || (hspi->RxXferCount > 0U)) + { + /* Check TXE flag */ + if ((__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_TXE)) && (hspi->TxXferCount > 0U) && (txallowed == 1U)) + { + hspi->Instance->DR = *((const uint16_t *)hspi->pTxBuffPtr); + hspi->pTxBuffPtr += sizeof(uint16_t); + hspi->TxXferCount--; + /* Next Data is a reception (Rx). Tx not allowed */ + txallowed = 0U; + +#if (USE_SPI_CRC != 0U) + /* Enable CRC Transmission */ + if ((hspi->TxXferCount == 0U) && (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)) + { + /* Set NSS Soft to received correctly the CRC on slave mode with NSS pulse activated */ + if ((READ_BIT(spi_cr1, SPI_CR1_MSTR) == 0U) && (READ_BIT(spi_cr2, SPI_CR2_NSSP) == SPI_CR2_NSSP)) + { + SET_BIT(hspi->Instance->CR1, SPI_CR1_SSM); + } + SET_BIT(hspi->Instance->CR1, SPI_CR1_CRCNEXT); + } +#endif /* USE_SPI_CRC */ + } + + /* Check RXNE flag */ + if ((__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_RXNE)) && (hspi->RxXferCount > 0U)) + { + *((uint16_t *)hspi->pRxBuffPtr) = (uint16_t)hspi->Instance->DR; + hspi->pRxBuffPtr += sizeof(uint16_t); + hspi->RxXferCount--; + /* Next Data is a Transmission (Tx). Tx is allowed */ + txallowed = 1U; + } + if (((HAL_GetTick() - tickstart) >= Timeout) && (Timeout != HAL_MAX_DELAY)) + { + hspi->State = HAL_SPI_STATE_READY; + __HAL_UNLOCK(hspi); + return HAL_TIMEOUT; + } + } + } + /* Transmit and Receive data in 8 Bit mode */ + else + { + if ((hspi->Init.Mode == SPI_MODE_SLAVE) || (initial_TxXferCount == 0x01U)) + { + if (hspi->TxXferCount > 1U) + { + hspi->Instance->DR = *((const uint16_t *)hspi->pTxBuffPtr); + hspi->pTxBuffPtr += sizeof(uint16_t); + hspi->TxXferCount -= 2U; + } + else + { + *(__IO uint8_t *)&hspi->Instance->DR = *((const uint8_t *)hspi->pTxBuffPtr); + hspi->pTxBuffPtr++; + hspi->TxXferCount--; + +#if (USE_SPI_CRC != 0U) + /* Enable CRC Transmission */ + if ((hspi->TxXferCount == 0U) && (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)) + { + /* Set NSS Soft to received correctly the CRC on slave mode with NSS pulse activated */ + if ((READ_BIT(spi_cr1, SPI_CR1_MSTR) == 0U) && (READ_BIT(spi_cr2, SPI_CR2_NSSP) == SPI_CR2_NSSP)) + { + SET_BIT(hspi->Instance->CR1, SPI_CR1_SSM); + } + SET_BIT(hspi->Instance->CR1, SPI_CR1_CRCNEXT); + } +#endif /* USE_SPI_CRC */ + } + } + while ((hspi->TxXferCount > 0U) || (hspi->RxXferCount > 0U)) + { + /* Check TXE flag */ + if ((__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_TXE)) && (hspi->TxXferCount > 0U) && (txallowed == 1U)) + { + if (hspi->TxXferCount > 1U) + { + hspi->Instance->DR = *((const uint16_t *)hspi->pTxBuffPtr); + hspi->pTxBuffPtr += sizeof(uint16_t); + hspi->TxXferCount -= 2U; + } + else + { + *(__IO uint8_t *)&hspi->Instance->DR = *((const uint8_t *)hspi->pTxBuffPtr); + hspi->pTxBuffPtr++; + hspi->TxXferCount--; + } + /* Next Data is a reception (Rx). Tx not allowed */ + txallowed = 0U; + +#if (USE_SPI_CRC != 0U) + /* Enable CRC Transmission */ + if ((hspi->TxXferCount == 0U) && (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)) + { + /* Set NSS Soft to received correctly the CRC on slave mode with NSS pulse activated */ + if ((READ_BIT(spi_cr1, SPI_CR1_MSTR) == 0U) && (READ_BIT(spi_cr2, SPI_CR2_NSSP) == SPI_CR2_NSSP)) + { + SET_BIT(hspi->Instance->CR1, SPI_CR1_SSM); + } + SET_BIT(hspi->Instance->CR1, SPI_CR1_CRCNEXT); + } +#endif /* USE_SPI_CRC */ + } + + /* Wait until RXNE flag is reset */ + if ((__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_RXNE)) && (hspi->RxXferCount > 0U)) + { + if (hspi->RxXferCount > 1U) + { + *((uint16_t *)hspi->pRxBuffPtr) = (uint16_t)hspi->Instance->DR; + hspi->pRxBuffPtr += sizeof(uint16_t); + hspi->RxXferCount -= 2U; + if (hspi->RxXferCount <= 1U) + { + /* Set RX Fifo threshold before to switch on 8 bit data size */ + SET_BIT(hspi->Instance->CR2, SPI_RXFIFO_THRESHOLD); + } + } + else + { + (*(uint8_t *)hspi->pRxBuffPtr) = *(__IO uint8_t *)&hspi->Instance->DR; + hspi->pRxBuffPtr++; + hspi->RxXferCount--; + } + /* Next Data is a Transmission (Tx). Tx is allowed */ + txallowed = 1U; + } + if ((((HAL_GetTick() - tickstart) >= Timeout) && ((Timeout != HAL_MAX_DELAY))) || (Timeout == 0U)) + { + hspi->State = HAL_SPI_STATE_READY; + __HAL_UNLOCK(hspi); + return HAL_TIMEOUT; + } + } + } + +#if (USE_SPI_CRC != 0U) + /* Read CRC from DR to close CRC calculation process */ + if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + /* Wait until TXE flag */ + if (SPI_WaitFlagStateUntilTimeout(hspi, SPI_FLAG_RXNE, SET, Timeout, tickstart) != HAL_OK) + { + /* Error on the CRC reception */ + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_CRC); + hspi->State = HAL_SPI_STATE_READY; + __HAL_UNLOCK(hspi); + return HAL_TIMEOUT; + } + /* Read CRC */ + if (hspi->Init.DataSize == SPI_DATASIZE_16BIT) + { + /* Read 16bit CRC */ + tmpreg = READ_REG(hspi->Instance->DR); + /* To avoid GCC warning */ + UNUSED(tmpreg); + } + else + { + /* Initialize the 8bit temporary pointer */ + ptmpreg8 = (__IO uint8_t *)&hspi->Instance->DR; + /* Read 8bit CRC */ + tmpreg8 = *ptmpreg8; + /* To avoid GCC warning */ + UNUSED(tmpreg8); + + if (hspi->Init.CRCLength == SPI_CRC_LENGTH_16BIT) + { + if (SPI_WaitFlagStateUntilTimeout(hspi, SPI_FLAG_RXNE, SET, Timeout, tickstart) != HAL_OK) + { + /* Error on the CRC reception */ + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_CRC); + hspi->State = HAL_SPI_STATE_READY; + __HAL_UNLOCK(hspi); + return HAL_TIMEOUT; + } + /* Read 8bit CRC again in case of 16bit CRC in 8bit Data mode */ + tmpreg8 = *ptmpreg8; + /* To avoid GCC warning */ + UNUSED(tmpreg8); + } + } + } + + /* Check if CRC error occurred */ + if (__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_CRCERR)) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_CRC); + /* Clear CRC Flag */ + __HAL_SPI_CLEAR_CRCERRFLAG(hspi); + __HAL_UNLOCK(hspi); + return HAL_ERROR; + } +#endif /* USE_SPI_CRC */ + + /* Check the end of the transaction */ + if (SPI_EndRxTxTransaction(hspi, Timeout, tickstart) != HAL_OK) + { + hspi->ErrorCode = HAL_SPI_ERROR_FLAG; + __HAL_UNLOCK(hspi); + return HAL_ERROR; + } + + + hspi->State = HAL_SPI_STATE_READY; + /* Unlock the process */ + __HAL_UNLOCK(hspi); + + if (hspi->ErrorCode != HAL_SPI_ERROR_NONE) + { + return HAL_ERROR; + } + else + { + return HAL_OK; + } +} + +/** + * @brief Transmit an amount of data in non-blocking mode with Interrupt. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @param pData pointer to data buffer + * @param Size amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SPI_Transmit_IT(SPI_HandleTypeDef *hspi, const uint8_t *pData, uint16_t Size) +{ + + /* Check Direction parameter */ + assert_param(IS_SPI_DIRECTION_2LINES_OR_1LINE(hspi->Init.Direction)); + + + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + if (hspi->State != HAL_SPI_STATE_READY) + { + return HAL_BUSY; + } + + /* Process Locked */ + __HAL_LOCK(hspi); + + /* Set the transaction information */ + hspi->State = HAL_SPI_STATE_BUSY_TX; + hspi->ErrorCode = HAL_SPI_ERROR_NONE; + hspi->pTxBuffPtr = (const uint8_t *)pData; + hspi->TxXferSize = Size; + hspi->TxXferCount = Size; + + /* Init field not used in handle to zero */ + hspi->pRxBuffPtr = (uint8_t *)NULL; + hspi->RxXferSize = 0U; + hspi->RxXferCount = 0U; + hspi->RxISR = NULL; + + /* Set the function for IT treatment */ + if (hspi->Init.DataSize > SPI_DATASIZE_8BIT) + { + hspi->TxISR = SPI_TxISR_16BIT; + } + else + { + hspi->TxISR = SPI_TxISR_8BIT; + } + + /* Configure communication direction : 1Line */ + if (hspi->Init.Direction == SPI_DIRECTION_1LINE) + { + /* Disable SPI Peripheral before set 1Line direction (BIDIOE bit) */ + __HAL_SPI_DISABLE(hspi); + SPI_1LINE_TX(hspi); + } + +#if (USE_SPI_CRC != 0U) + /* Reset CRC Calculation */ + if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + SPI_RESET_CRC(hspi); + } +#endif /* USE_SPI_CRC */ + + /* Check if the SPI is already enabled */ + if ((hspi->Instance->CR1 & SPI_CR1_SPE) != SPI_CR1_SPE) + { + /* Enable SPI peripheral */ + __HAL_SPI_ENABLE(hspi); + } + + /* Process Unlocked */ + __HAL_UNLOCK(hspi); + /* Enable TXE and ERR interrupt */ + __HAL_SPI_ENABLE_IT(hspi, (SPI_IT_TXE | SPI_IT_ERR)); + + return HAL_OK; +} + +/** + * @brief Receive an amount of data in non-blocking mode with Interrupt. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @param pData pointer to data buffer + * @param Size amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SPI_Receive_IT(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size) +{ + + if (hspi->State != HAL_SPI_STATE_READY) + { + return HAL_BUSY; + } + + if ((hspi->Init.Direction == SPI_DIRECTION_2LINES) && (hspi->Init.Mode == SPI_MODE_MASTER)) + { + hspi->State = HAL_SPI_STATE_BUSY_RX; + /* Call transmit-receive function to send Dummy data on Tx line and generate clock on CLK line */ + return HAL_SPI_TransmitReceive_IT(hspi, pData, pData, Size); + } + + + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* Process Locked */ + __HAL_LOCK(hspi); + + /* Set the transaction information */ + hspi->State = HAL_SPI_STATE_BUSY_RX; + hspi->ErrorCode = HAL_SPI_ERROR_NONE; + hspi->pRxBuffPtr = (uint8_t *)pData; + hspi->RxXferSize = Size; + hspi->RxXferCount = Size; + + /* Init field not used in handle to zero */ + hspi->pTxBuffPtr = (uint8_t *)NULL; + hspi->TxXferSize = 0U; + hspi->TxXferCount = 0U; + hspi->TxISR = NULL; + + /* Check the data size to adapt Rx threshold and the set the function for IT treatment */ + if (hspi->Init.DataSize > SPI_DATASIZE_8BIT) + { + /* Set RX Fifo threshold according the reception data length: 16 bit */ + CLEAR_BIT(hspi->Instance->CR2, SPI_RXFIFO_THRESHOLD); + hspi->RxISR = SPI_RxISR_16BIT; + } + else + { + /* Set RX Fifo threshold according the reception data length: 8 bit */ + SET_BIT(hspi->Instance->CR2, SPI_RXFIFO_THRESHOLD); + hspi->RxISR = SPI_RxISR_8BIT; + } + + /* Configure communication direction : 1Line */ + if (hspi->Init.Direction == SPI_DIRECTION_1LINE) + { + /* Disable SPI Peripheral before set 1Line direction (BIDIOE bit) */ + __HAL_SPI_DISABLE(hspi); + SPI_1LINE_RX(hspi); + } + +#if (USE_SPI_CRC != 0U) + /* Reset CRC Calculation */ + if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + hspi->CRCSize = 1U; + if ((hspi->Init.DataSize <= SPI_DATASIZE_8BIT) && (hspi->Init.CRCLength == SPI_CRC_LENGTH_16BIT)) + { + hspi->CRCSize = 2U; + } + SPI_RESET_CRC(hspi); + } + else + { + hspi->CRCSize = 0U; + } +#endif /* USE_SPI_CRC */ + + /* Note : The SPI must be enabled after unlocking current process + to avoid the risk of SPI interrupt handle execution before current + process unlock */ + + /* Check if the SPI is already enabled */ + if ((hspi->Instance->CR1 & SPI_CR1_SPE) != SPI_CR1_SPE) + { + /* Enable SPI peripheral */ + __HAL_SPI_ENABLE(hspi); + } + + /* Process Unlocked */ + __HAL_UNLOCK(hspi); + /* Enable RXNE and ERR interrupt */ + __HAL_SPI_ENABLE_IT(hspi, (SPI_IT_RXNE | SPI_IT_ERR)); + + return HAL_OK; +} + +/** + * @brief Transmit and Receive an amount of data in non-blocking mode with Interrupt. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @param pTxData pointer to transmission data buffer + * @param pRxData pointer to reception data buffer + * @param Size amount of data to be sent and received + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SPI_TransmitReceive_IT(SPI_HandleTypeDef *hspi, const uint8_t *pTxData, uint8_t *pRxData, + uint16_t Size) +{ + uint32_t tmp_mode; + HAL_SPI_StateTypeDef tmp_state; + + /* Check Direction parameter */ + assert_param(IS_SPI_DIRECTION_2LINES(hspi->Init.Direction)); + + /* Init temporary variables */ + tmp_state = hspi->State; + tmp_mode = hspi->Init.Mode; + + if (!((tmp_state == HAL_SPI_STATE_READY) || \ + ((tmp_mode == SPI_MODE_MASTER) && (hspi->Init.Direction == SPI_DIRECTION_2LINES) && + (tmp_state == HAL_SPI_STATE_BUSY_RX)))) + { + return HAL_BUSY; + } + + if ((pTxData == NULL) || (pRxData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* Process locked */ + __HAL_LOCK(hspi); + + /* Don't overwrite in case of HAL_SPI_STATE_BUSY_RX */ + if (hspi->State != HAL_SPI_STATE_BUSY_RX) + { + hspi->State = HAL_SPI_STATE_BUSY_TX_RX; + } + + /* Set the transaction information */ + hspi->ErrorCode = HAL_SPI_ERROR_NONE; + hspi->pTxBuffPtr = (const uint8_t *)pTxData; + hspi->TxXferSize = Size; + hspi->TxXferCount = Size; + hspi->pRxBuffPtr = (uint8_t *)pRxData; + hspi->RxXferSize = Size; + hspi->RxXferCount = Size; + + /* Set the function for IT treatment */ + if (hspi->Init.DataSize > SPI_DATASIZE_8BIT) + { + hspi->RxISR = SPI_2linesRxISR_16BIT; + hspi->TxISR = SPI_2linesTxISR_16BIT; + } + else + { + hspi->RxISR = SPI_2linesRxISR_8BIT; + hspi->TxISR = SPI_2linesTxISR_8BIT; + } + +#if (USE_SPI_CRC != 0U) + /* Reset CRC Calculation */ + if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + hspi->CRCSize = 1U; + if ((hspi->Init.DataSize <= SPI_DATASIZE_8BIT) && (hspi->Init.CRCLength == SPI_CRC_LENGTH_16BIT)) + { + hspi->CRCSize = 2U; + } + SPI_RESET_CRC(hspi); + } + else + { + hspi->CRCSize = 0U; + } +#endif /* USE_SPI_CRC */ + + /* Check if packing mode is enabled and if there is more than 2 data to receive */ + if ((hspi->Init.DataSize > SPI_DATASIZE_8BIT) || (Size >= 2U)) + { + /* Set RX Fifo threshold according the reception data length: 16 bit */ + CLEAR_BIT(hspi->Instance->CR2, SPI_RXFIFO_THRESHOLD); + } + else + { + /* Set RX Fifo threshold according the reception data length: 8 bit */ + SET_BIT(hspi->Instance->CR2, SPI_RXFIFO_THRESHOLD); + } + + + /* Check if the SPI is already enabled */ + if ((hspi->Instance->CR1 & SPI_CR1_SPE) != SPI_CR1_SPE) + { + /* Enable SPI peripheral */ + __HAL_SPI_ENABLE(hspi); + } + + /* Process Unlocked */ + __HAL_UNLOCK(hspi); + /* Enable TXE, RXNE and ERR interrupt */ + __HAL_SPI_ENABLE_IT(hspi, (SPI_IT_TXE | SPI_IT_RXNE | SPI_IT_ERR)); + + return HAL_OK; +} + +/** + * @brief Transmit an amount of data in non-blocking mode with DMA. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @param pData pointer to data buffer + * @param Size amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SPI_Transmit_DMA(SPI_HandleTypeDef *hspi, const uint8_t *pData, uint16_t Size) +{ + + /* Check tx dma handle */ + assert_param(IS_SPI_DMA_HANDLE(hspi->hdmatx)); + + /* Check Direction parameter */ + assert_param(IS_SPI_DIRECTION_2LINES_OR_1LINE(hspi->Init.Direction)); + + if (hspi->State != HAL_SPI_STATE_READY) + { + return HAL_BUSY; + } + + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* Process Locked */ + __HAL_LOCK(hspi); + + /* Set the transaction information */ + hspi->State = HAL_SPI_STATE_BUSY_TX; + hspi->ErrorCode = HAL_SPI_ERROR_NONE; + hspi->pTxBuffPtr = (const uint8_t *)pData; + hspi->TxXferSize = Size; + hspi->TxXferCount = Size; + + /* Init field not used in handle to zero */ + hspi->pRxBuffPtr = (uint8_t *)NULL; + hspi->TxISR = NULL; + hspi->RxISR = NULL; + hspi->RxXferSize = 0U; + hspi->RxXferCount = 0U; + + /* Configure communication direction : 1Line */ + if (hspi->Init.Direction == SPI_DIRECTION_1LINE) + { + /* Disable SPI Peripheral before set 1Line direction (BIDIOE bit) */ + __HAL_SPI_DISABLE(hspi); + SPI_1LINE_TX(hspi); + } + +#if (USE_SPI_CRC != 0U) + /* Reset CRC Calculation */ + if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + SPI_RESET_CRC(hspi); + } +#endif /* USE_SPI_CRC */ + + /* Set the SPI TxDMA Half transfer complete callback */ + hspi->hdmatx->XferHalfCpltCallback = SPI_DMAHalfTransmitCplt; + + /* Set the SPI TxDMA transfer complete callback */ + hspi->hdmatx->XferCpltCallback = SPI_DMATransmitCplt; + + /* Set the DMA error callback */ + hspi->hdmatx->XferErrorCallback = SPI_DMAError; + + /* Set the DMA AbortCpltCallback */ + hspi->hdmatx->XferAbortCallback = NULL; + + CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_LDMATX); + /* Packing mode is enabled only if the DMA setting is HALWORD */ + if ((hspi->Init.DataSize <= SPI_DATASIZE_8BIT) && (hspi->hdmatx->Init.MemDataAlignment == DMA_MDATAALIGN_HALFWORD)) + { + /* Check the even/odd of the data size + crc if enabled */ + if ((hspi->TxXferCount & 0x1U) == 0U) + { + CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_LDMATX); + hspi->TxXferCount = (hspi->TxXferCount >> 1U); + } + else + { + SET_BIT(hspi->Instance->CR2, SPI_CR2_LDMATX); + hspi->TxXferCount = (hspi->TxXferCount >> 1U) + 1U; + } + } + + /* Enable the Tx DMA Stream/Channel */ + if (HAL_OK != HAL_DMA_Start_IT(hspi->hdmatx, (uint32_t)hspi->pTxBuffPtr, (uint32_t)&hspi->Instance->DR, + hspi->TxXferCount)) + { + /* Update SPI error code */ + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_DMA); + /* Process Unlocked */ + __HAL_UNLOCK(hspi); + return HAL_ERROR; + } + + /* Check if the SPI is already enabled */ + if ((hspi->Instance->CR1 & SPI_CR1_SPE) != SPI_CR1_SPE) + { + /* Enable SPI peripheral */ + __HAL_SPI_ENABLE(hspi); + } + + /* Process Unlocked */ + __HAL_UNLOCK(hspi); + + /* Enable the SPI Error Interrupt Bit */ + __HAL_SPI_ENABLE_IT(hspi, (SPI_IT_ERR)); + + /* Enable Tx DMA Request */ + SET_BIT(hspi->Instance->CR2, SPI_CR2_TXDMAEN); + + return HAL_OK; +} + +/** + * @brief Receive an amount of data in non-blocking mode with DMA. + * @note In case of MASTER mode and SPI_DIRECTION_2LINES direction, hdmatx shall be defined. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @param pData pointer to data buffer + * @note When the CRC feature is enabled the pData Length must be Size + 1. + * @param Size amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SPI_Receive_DMA(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size) +{ + /* Check rx dma handle */ + assert_param(IS_SPI_DMA_HANDLE(hspi->hdmarx)); + + if (hspi->State != HAL_SPI_STATE_READY) + { + return HAL_BUSY; + } + + if ((hspi->Init.Direction == SPI_DIRECTION_2LINES) && (hspi->Init.Mode == SPI_MODE_MASTER)) + { + hspi->State = HAL_SPI_STATE_BUSY_RX; + + /* Check tx dma handle */ + assert_param(IS_SPI_DMA_HANDLE(hspi->hdmatx)); + + /* Call transmit-receive function to send Dummy data on Tx line and generate clock on CLK line */ + return HAL_SPI_TransmitReceive_DMA(hspi, pData, pData, Size); + } + + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* Process Locked */ + __HAL_LOCK(hspi); + + /* Set the transaction information */ + hspi->State = HAL_SPI_STATE_BUSY_RX; + hspi->ErrorCode = HAL_SPI_ERROR_NONE; + hspi->pRxBuffPtr = (uint8_t *)pData; + hspi->RxXferSize = Size; + hspi->RxXferCount = Size; + + /*Init field not used in handle to zero */ + hspi->RxISR = NULL; + hspi->TxISR = NULL; + hspi->TxXferSize = 0U; + hspi->TxXferCount = 0U; + + /* Configure communication direction : 1Line */ + if (hspi->Init.Direction == SPI_DIRECTION_1LINE) + { + /* Disable SPI Peripheral before set 1Line direction (BIDIOE bit) */ + __HAL_SPI_DISABLE(hspi); + SPI_1LINE_RX(hspi); + } + +#if (USE_SPI_CRC != 0U) + /* Reset CRC Calculation */ + if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + SPI_RESET_CRC(hspi); + } +#endif /* USE_SPI_CRC */ + + + CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_LDMARX); + if (hspi->Init.DataSize > SPI_DATASIZE_8BIT) + { + /* Set RX Fifo threshold according the reception data length: 16bit */ + CLEAR_BIT(hspi->Instance->CR2, SPI_RXFIFO_THRESHOLD); + } + else + { + /* Set RX Fifo threshold according the reception data length: 8bit */ + SET_BIT(hspi->Instance->CR2, SPI_RXFIFO_THRESHOLD); + + if (hspi->hdmarx->Init.MemDataAlignment == DMA_MDATAALIGN_HALFWORD) + { + /* Set RX Fifo threshold according the reception data length: 16bit */ + CLEAR_BIT(hspi->Instance->CR2, SPI_RXFIFO_THRESHOLD); + + if ((hspi->RxXferCount & 0x1U) == 0x0U) + { + CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_LDMARX); + hspi->RxXferCount = hspi->RxXferCount >> 1U; + } + else + { + SET_BIT(hspi->Instance->CR2, SPI_CR2_LDMARX); + hspi->RxXferCount = (hspi->RxXferCount >> 1U) + 1U; + } + } + } + + /* Set the SPI RxDMA Half transfer complete callback */ + hspi->hdmarx->XferHalfCpltCallback = SPI_DMAHalfReceiveCplt; + + /* Set the SPI Rx DMA transfer complete callback */ + hspi->hdmarx->XferCpltCallback = SPI_DMAReceiveCplt; + + /* Set the DMA error callback */ + hspi->hdmarx->XferErrorCallback = SPI_DMAError; + + /* Set the DMA AbortCpltCallback */ + hspi->hdmarx->XferAbortCallback = NULL; + + /* Enable the Rx DMA Stream/Channel */ + if (HAL_OK != HAL_DMA_Start_IT(hspi->hdmarx, (uint32_t)&hspi->Instance->DR, (uint32_t)hspi->pRxBuffPtr, + hspi->RxXferCount)) + { + /* Update SPI error code */ + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_DMA); + /* Process Unlocked */ + __HAL_UNLOCK(hspi); + return HAL_ERROR; + } + + /* Check if the SPI is already enabled */ + if ((hspi->Instance->CR1 & SPI_CR1_SPE) != SPI_CR1_SPE) + { + /* Enable SPI peripheral */ + __HAL_SPI_ENABLE(hspi); + } + + /* Process Unlocked */ + __HAL_UNLOCK(hspi); + + /* Enable the SPI Error Interrupt Bit */ + __HAL_SPI_ENABLE_IT(hspi, (SPI_IT_ERR)); + + /* Enable Rx DMA Request */ + SET_BIT(hspi->Instance->CR2, SPI_CR2_RXDMAEN); + + return HAL_OK; +} + +/** + * @brief Transmit and Receive an amount of data in non-blocking mode with DMA. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @param pTxData pointer to transmission data buffer + * @param pRxData pointer to reception data buffer + * @note When the CRC feature is enabled the pRxData Length must be Size + 1 + * @param Size amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SPI_TransmitReceive_DMA(SPI_HandleTypeDef *hspi, const uint8_t *pTxData, uint8_t *pRxData, + uint16_t Size) +{ + uint32_t tmp_mode; + HAL_SPI_StateTypeDef tmp_state; + + /* Check rx & tx dma handles */ + assert_param(IS_SPI_DMA_HANDLE(hspi->hdmarx)); + assert_param(IS_SPI_DMA_HANDLE(hspi->hdmatx)); + + /* Check Direction parameter */ + assert_param(IS_SPI_DIRECTION_2LINES(hspi->Init.Direction)); + + /* Init temporary variables */ + tmp_state = hspi->State; + tmp_mode = hspi->Init.Mode; + + if (!((tmp_state == HAL_SPI_STATE_READY) || + ((tmp_mode == SPI_MODE_MASTER) && (hspi->Init.Direction == SPI_DIRECTION_2LINES) && + (tmp_state == HAL_SPI_STATE_BUSY_RX)))) + { + return HAL_BUSY; + } + + if ((pTxData == NULL) || (pRxData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* Process locked */ + __HAL_LOCK(hspi); + + /* Don't overwrite in case of HAL_SPI_STATE_BUSY_RX */ + if (hspi->State != HAL_SPI_STATE_BUSY_RX) + { + hspi->State = HAL_SPI_STATE_BUSY_TX_RX; + } + + /* Set the transaction information */ + hspi->ErrorCode = HAL_SPI_ERROR_NONE; + hspi->pTxBuffPtr = (const uint8_t *)pTxData; + hspi->TxXferSize = Size; + hspi->TxXferCount = Size; + hspi->pRxBuffPtr = (uint8_t *)pRxData; + hspi->RxXferSize = Size; + hspi->RxXferCount = Size; + + /* Init field not used in handle to zero */ + hspi->RxISR = NULL; + hspi->TxISR = NULL; + +#if (USE_SPI_CRC != 0U) + /* Reset CRC Calculation */ + if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + SPI_RESET_CRC(hspi); + } +#endif /* USE_SPI_CRC */ + + /* Reset the threshold bit */ + CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_LDMATX | SPI_CR2_LDMARX); + + /* The packing mode management is enabled by the DMA settings according the spi data size */ + if (hspi->Init.DataSize > SPI_DATASIZE_8BIT) + { + /* Set fiforxthreshold according the reception data length: 16bit */ + CLEAR_BIT(hspi->Instance->CR2, SPI_RXFIFO_THRESHOLD); + } + else + { + /* Set RX Fifo threshold according the reception data length: 8bit */ + SET_BIT(hspi->Instance->CR2, SPI_RXFIFO_THRESHOLD); + + if (hspi->hdmatx->Init.MemDataAlignment == DMA_MDATAALIGN_HALFWORD) + { + if ((hspi->TxXferSize & 0x1U) == 0x0U) + { + CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_LDMATX); + hspi->TxXferCount = hspi->TxXferCount >> 1U; + } + else + { + SET_BIT(hspi->Instance->CR2, SPI_CR2_LDMATX); + hspi->TxXferCount = (hspi->TxXferCount >> 1U) + 1U; + } + } + + if (hspi->hdmarx->Init.MemDataAlignment == DMA_MDATAALIGN_HALFWORD) + { + /* Set RX Fifo threshold according the reception data length: 16bit */ + CLEAR_BIT(hspi->Instance->CR2, SPI_RXFIFO_THRESHOLD); + + if ((hspi->RxXferCount & 0x1U) == 0x0U) + { + CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_LDMARX); + hspi->RxXferCount = hspi->RxXferCount >> 1U; + } + else + { + SET_BIT(hspi->Instance->CR2, SPI_CR2_LDMARX); + hspi->RxXferCount = (hspi->RxXferCount >> 1U) + 1U; + } + } + } + + /* Check if we are in Rx only or in Rx/Tx Mode and configure the DMA transfer complete callback */ + if (hspi->State == HAL_SPI_STATE_BUSY_RX) + { + /* Set the SPI Rx DMA Half transfer complete callback */ + hspi->hdmarx->XferHalfCpltCallback = SPI_DMAHalfReceiveCplt; + hspi->hdmarx->XferCpltCallback = SPI_DMAReceiveCplt; + } + else + { + /* Set the SPI Tx/Rx DMA Half transfer complete callback */ + hspi->hdmarx->XferHalfCpltCallback = SPI_DMAHalfTransmitReceiveCplt; + hspi->hdmarx->XferCpltCallback = SPI_DMATransmitReceiveCplt; + } + + /* Set the DMA error callback */ + hspi->hdmarx->XferErrorCallback = SPI_DMAError; + + /* Set the DMA AbortCpltCallback */ + hspi->hdmarx->XferAbortCallback = NULL; + + /* Enable the Rx DMA Stream/Channel */ + if (HAL_OK != HAL_DMA_Start_IT(hspi->hdmarx, (uint32_t)&hspi->Instance->DR, (uint32_t)hspi->pRxBuffPtr, + hspi->RxXferCount)) + { + /* Update SPI error code */ + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_DMA); + /* Process Unlocked */ + __HAL_UNLOCK(hspi); + return HAL_ERROR; + } + + /* Enable Rx DMA Request */ + SET_BIT(hspi->Instance->CR2, SPI_CR2_RXDMAEN); + + /* Set the SPI Tx DMA transfer complete callback as NULL because the communication closing + is performed in DMA reception complete callback */ + hspi->hdmatx->XferHalfCpltCallback = NULL; + hspi->hdmatx->XferCpltCallback = NULL; + hspi->hdmatx->XferErrorCallback = NULL; + hspi->hdmatx->XferAbortCallback = NULL; + + /* Enable the Tx DMA Stream/Channel */ + if (HAL_OK != HAL_DMA_Start_IT(hspi->hdmatx, (uint32_t)hspi->pTxBuffPtr, (uint32_t)&hspi->Instance->DR, + hspi->TxXferCount)) + { + /* Update SPI error code */ + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_DMA); + /* Process Unlocked */ + __HAL_UNLOCK(hspi); + return HAL_ERROR; + } + + /* Check if the SPI is already enabled */ + if ((hspi->Instance->CR1 & SPI_CR1_SPE) != SPI_CR1_SPE) + { + /* Enable SPI peripheral */ + __HAL_SPI_ENABLE(hspi); + } + + /* Process Unlocked */ + __HAL_UNLOCK(hspi); + + /* Enable the SPI Error Interrupt Bit */ + __HAL_SPI_ENABLE_IT(hspi, (SPI_IT_ERR)); + + /* Enable Tx DMA Request */ + SET_BIT(hspi->Instance->CR2, SPI_CR2_TXDMAEN); + + return HAL_OK; +} + +/** + * @brief Abort ongoing transfer (blocking mode). + * @param hspi SPI handle. + * @note This procedure could be used for aborting any ongoing transfer (Tx and Rx), + * started in Interrupt or DMA mode. + * This procedure performs following operations : + * - Disable SPI Interrupts (depending of transfer direction) + * - Disable the DMA transfer in the peripheral register (if enabled) + * - Abort DMA transfer by calling HAL_DMA_Abort (in case of transfer in DMA mode) + * - Set handle State to READY + * @note This procedure is executed in blocking mode : when exiting function, Abort is considered as completed. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SPI_Abort(SPI_HandleTypeDef *hspi) +{ + HAL_StatusTypeDef errorcode; + __IO uint32_t count; + __IO uint32_t resetcount; + + /* Initialized local variable */ + errorcode = HAL_OK; + resetcount = SPI_DEFAULT_TIMEOUT * (SystemCoreClock / 24U / 1000U); + count = resetcount; + + /* Clear ERRIE interrupt to avoid error interrupts generation during Abort procedure */ + CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_ERRIE); + + /* Disable TXEIE, RXNEIE and ERRIE(mode fault event, overrun error, TI frame error) interrupts */ + if (HAL_IS_BIT_SET(hspi->Instance->CR2, SPI_CR2_TXEIE)) + { + hspi->TxISR = SPI_AbortTx_ISR; + /* Wait HAL_SPI_STATE_ABORT state */ + do + { + if (count == 0U) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_ABORT); + break; + } + count--; + } while (hspi->State != HAL_SPI_STATE_ABORT); + /* Reset Timeout Counter */ + count = resetcount; + } + + if (HAL_IS_BIT_SET(hspi->Instance->CR2, SPI_CR2_RXNEIE)) + { + hspi->RxISR = SPI_AbortRx_ISR; + /* Wait HAL_SPI_STATE_ABORT state */ + do + { + if (count == 0U) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_ABORT); + break; + } + count--; + } while (hspi->State != HAL_SPI_STATE_ABORT); + /* Reset Timeout Counter */ + count = resetcount; + } + + /* Disable the SPI DMA Tx request if enabled */ + if (HAL_IS_BIT_SET(hspi->Instance->CR2, SPI_CR2_TXDMAEN)) + { + /* Abort the SPI DMA Tx Stream/Channel : use blocking DMA Abort API (no callback) */ + if (hspi->hdmatx != NULL) + { + /* Set the SPI DMA Abort callback : + will lead to call HAL_SPI_AbortCpltCallback() at end of DMA abort procedure */ + hspi->hdmatx->XferAbortCallback = NULL; + + /* Abort DMA Tx Handle linked to SPI Peripheral */ + if (HAL_DMA_Abort(hspi->hdmatx) != HAL_OK) + { + hspi->ErrorCode = HAL_SPI_ERROR_ABORT; + } + + /* Disable Tx DMA Request */ + CLEAR_BIT(hspi->Instance->CR2, (SPI_CR2_TXDMAEN)); + + if (SPI_EndRxTxTransaction(hspi, SPI_DEFAULT_TIMEOUT, HAL_GetTick()) != HAL_OK) + { + hspi->ErrorCode = HAL_SPI_ERROR_ABORT; + } + + /* Disable SPI Peripheral */ + __HAL_SPI_DISABLE(hspi); + + /* Empty the FRLVL fifo */ + if (SPI_WaitFifoStateUntilTimeout(hspi, SPI_FLAG_FRLVL, SPI_FRLVL_EMPTY, SPI_DEFAULT_TIMEOUT, + HAL_GetTick()) != HAL_OK) + { + hspi->ErrorCode = HAL_SPI_ERROR_ABORT; + } + } + } + + /* Disable the SPI DMA Rx request if enabled */ + if (HAL_IS_BIT_SET(hspi->Instance->CR2, SPI_CR2_RXDMAEN)) + { + /* Abort the SPI DMA Rx Stream/Channel : use blocking DMA Abort API (no callback) */ + if (hspi->hdmarx != NULL) + { + /* Set the SPI DMA Abort callback : + will lead to call HAL_SPI_AbortCpltCallback() at end of DMA abort procedure */ + hspi->hdmarx->XferAbortCallback = NULL; + + /* Abort DMA Rx Handle linked to SPI Peripheral */ + if (HAL_DMA_Abort(hspi->hdmarx) != HAL_OK) + { + hspi->ErrorCode = HAL_SPI_ERROR_ABORT; + } + + /* Disable peripheral */ + __HAL_SPI_DISABLE(hspi); + + /* Control the BSY flag */ + if (SPI_WaitFlagStateUntilTimeout(hspi, SPI_FLAG_BSY, RESET, SPI_DEFAULT_TIMEOUT, HAL_GetTick()) != HAL_OK) + { + hspi->ErrorCode = HAL_SPI_ERROR_ABORT; + } + + /* Empty the FRLVL fifo */ + if (SPI_WaitFifoStateUntilTimeout(hspi, SPI_FLAG_FRLVL, SPI_FRLVL_EMPTY, SPI_DEFAULT_TIMEOUT, + HAL_GetTick()) != HAL_OK) + { + hspi->ErrorCode = HAL_SPI_ERROR_ABORT; + } + + /* Disable Rx DMA Request */ + CLEAR_BIT(hspi->Instance->CR2, (SPI_CR2_RXDMAEN)); + } + } + /* Reset Tx and Rx transfer counters */ + hspi->RxXferCount = 0U; + hspi->TxXferCount = 0U; + + /* Check error during Abort procedure */ + if (hspi->ErrorCode == HAL_SPI_ERROR_ABORT) + { + /* return HAL_Error in case of error during Abort procedure */ + errorcode = HAL_ERROR; + } + else + { + /* Reset errorCode */ + hspi->ErrorCode = HAL_SPI_ERROR_NONE; + } + + /* Clear the Error flags in the SR register */ + __HAL_SPI_CLEAR_OVRFLAG(hspi); + __HAL_SPI_CLEAR_FREFLAG(hspi); + + /* Restore hspi->state to ready */ + hspi->State = HAL_SPI_STATE_READY; + + return errorcode; +} + +/** + * @brief Abort ongoing transfer (Interrupt mode). + * @param hspi SPI handle. + * @note This procedure could be used for aborting any ongoing transfer (Tx and Rx), + * started in Interrupt or DMA mode. + * This procedure performs following operations : + * - Disable SPI Interrupts (depending of transfer direction) + * - Disable the DMA transfer in the peripheral register (if enabled) + * - Abort DMA transfer by calling HAL_DMA_Abort_IT (in case of transfer in DMA mode) + * - Set handle State to READY + * - At abort completion, call user abort complete callback + * @note This procedure is executed in Interrupt mode, meaning that abort procedure could be + * considered as completed only when user abort complete callback is executed (not when exiting function). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SPI_Abort_IT(SPI_HandleTypeDef *hspi) +{ + HAL_StatusTypeDef errorcode; + uint32_t abortcplt ; + __IO uint32_t count; + __IO uint32_t resetcount; + + /* Initialized local variable */ + errorcode = HAL_OK; + abortcplt = 1U; + resetcount = SPI_DEFAULT_TIMEOUT * (SystemCoreClock / 24U / 1000U); + count = resetcount; + + /* Clear ERRIE interrupt to avoid error interrupts generation during Abort procedure */ + CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_ERRIE); + + /* Change Rx and Tx Irq Handler to Disable TXEIE, RXNEIE and ERRIE interrupts */ + if (HAL_IS_BIT_SET(hspi->Instance->CR2, SPI_CR2_TXEIE)) + { + hspi->TxISR = SPI_AbortTx_ISR; + /* Wait HAL_SPI_STATE_ABORT state */ + do + { + if (count == 0U) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_ABORT); + break; + } + count--; + } while (hspi->State != HAL_SPI_STATE_ABORT); + /* Reset Timeout Counter */ + count = resetcount; + } + + if (HAL_IS_BIT_SET(hspi->Instance->CR2, SPI_CR2_RXNEIE)) + { + hspi->RxISR = SPI_AbortRx_ISR; + /* Wait HAL_SPI_STATE_ABORT state */ + do + { + if (count == 0U) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_ABORT); + break; + } + count--; + } while (hspi->State != HAL_SPI_STATE_ABORT); + /* Reset Timeout Counter */ + count = resetcount; + } + + /* If DMA Tx and/or DMA Rx Handles are associated to SPI Handle, DMA Abort complete callbacks should be initialised + before any call to DMA Abort functions */ + /* DMA Tx Handle is valid */ + if (hspi->hdmatx != NULL) + { + /* Set DMA Abort Complete callback if UART DMA Tx request if enabled. + Otherwise, set it to NULL */ + if (HAL_IS_BIT_SET(hspi->Instance->CR2, SPI_CR2_TXDMAEN)) + { + hspi->hdmatx->XferAbortCallback = SPI_DMATxAbortCallback; + } + else + { + hspi->hdmatx->XferAbortCallback = NULL; + } + } + /* DMA Rx Handle is valid */ + if (hspi->hdmarx != NULL) + { + /* Set DMA Abort Complete callback if UART DMA Rx request if enabled. + Otherwise, set it to NULL */ + if (HAL_IS_BIT_SET(hspi->Instance->CR2, SPI_CR2_RXDMAEN)) + { + hspi->hdmarx->XferAbortCallback = SPI_DMARxAbortCallback; + } + else + { + hspi->hdmarx->XferAbortCallback = NULL; + } + } + + /* Disable the SPI DMA Tx request if enabled */ + if (HAL_IS_BIT_SET(hspi->Instance->CR2, SPI_CR2_TXDMAEN)) + { + /* Abort the SPI DMA Tx Stream/Channel */ + if (hspi->hdmatx != NULL) + { + /* Abort DMA Tx Handle linked to SPI Peripheral */ + if (HAL_DMA_Abort_IT(hspi->hdmatx) != HAL_OK) + { + hspi->hdmatx->XferAbortCallback = NULL; + hspi->ErrorCode = HAL_SPI_ERROR_ABORT; + } + else + { + abortcplt = 0U; + } + } + } + /* Disable the SPI DMA Rx request if enabled */ + if (HAL_IS_BIT_SET(hspi->Instance->CR2, SPI_CR2_RXDMAEN)) + { + /* Abort the SPI DMA Rx Stream/Channel */ + if (hspi->hdmarx != NULL) + { + /* Abort DMA Rx Handle linked to SPI Peripheral */ + if (HAL_DMA_Abort_IT(hspi->hdmarx) != HAL_OK) + { + hspi->hdmarx->XferAbortCallback = NULL; + hspi->ErrorCode = HAL_SPI_ERROR_ABORT; + } + else + { + abortcplt = 0U; + } + } + } + + if (abortcplt == 1U) + { + /* Reset Tx and Rx transfer counters */ + hspi->RxXferCount = 0U; + hspi->TxXferCount = 0U; + + /* Check error during Abort procedure */ + if (hspi->ErrorCode == HAL_SPI_ERROR_ABORT) + { + /* return HAL_Error in case of error during Abort procedure */ + errorcode = HAL_ERROR; + } + else + { + /* Reset errorCode */ + hspi->ErrorCode = HAL_SPI_ERROR_NONE; + } + + /* Clear the Error flags in the SR register */ + __HAL_SPI_CLEAR_OVRFLAG(hspi); + __HAL_SPI_CLEAR_FREFLAG(hspi); + + /* Restore hspi->State to Ready */ + hspi->State = HAL_SPI_STATE_READY; + + /* As no DMA to be aborted, call directly user Abort complete callback */ +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) + hspi->AbortCpltCallback(hspi); +#else + HAL_SPI_AbortCpltCallback(hspi); +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ + } + + return errorcode; +} + +/** + * @brief Pause the DMA Transfer. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for the specified SPI module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SPI_DMAPause(SPI_HandleTypeDef *hspi) +{ + /* Process Locked */ + __HAL_LOCK(hspi); + + /* Disable the SPI DMA Tx & Rx requests */ + CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_TXDMAEN | SPI_CR2_RXDMAEN); + + /* Process Unlocked */ + __HAL_UNLOCK(hspi); + + return HAL_OK; +} + +/** + * @brief Resume the DMA Transfer. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for the specified SPI module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SPI_DMAResume(SPI_HandleTypeDef *hspi) +{ + /* Process Locked */ + __HAL_LOCK(hspi); + + /* Enable the SPI DMA Tx & Rx requests */ + SET_BIT(hspi->Instance->CR2, SPI_CR2_TXDMAEN | SPI_CR2_RXDMAEN); + + /* Process Unlocked */ + __HAL_UNLOCK(hspi); + + return HAL_OK; +} + +/** + * @brief Stop the DMA Transfer. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for the specified SPI module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SPI_DMAStop(SPI_HandleTypeDef *hspi) +{ + HAL_StatusTypeDef errorcode = HAL_OK; + /* The Lock is not implemented on this API to allow the user application + to call the HAL SPI API under callbacks HAL_SPI_TxCpltCallback() or HAL_SPI_RxCpltCallback() or + HAL_SPI_TxRxCpltCallback(): + when calling HAL_DMA_Abort() API the DMA TX/RX Transfer complete interrupt is generated + and the correspond call back is executed HAL_SPI_TxCpltCallback() or HAL_SPI_RxCpltCallback() or + HAL_SPI_TxRxCpltCallback() + */ + + /* Abort the SPI DMA tx Stream/Channel */ + if (hspi->hdmatx != NULL) + { + if (HAL_OK != HAL_DMA_Abort(hspi->hdmatx)) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_DMA); + errorcode = HAL_ERROR; + } + } + /* Abort the SPI DMA rx Stream/Channel */ + if (hspi->hdmarx != NULL) + { + if (HAL_OK != HAL_DMA_Abort(hspi->hdmarx)) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_DMA); + errorcode = HAL_ERROR; + } + } + + /* Disable the SPI DMA Tx & Rx requests */ + CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_TXDMAEN | SPI_CR2_RXDMAEN); + hspi->State = HAL_SPI_STATE_READY; + return errorcode; +} + +/** + * @brief Handle SPI interrupt request. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for the specified SPI module. + * @retval None + */ +void HAL_SPI_IRQHandler(SPI_HandleTypeDef *hspi) +{ + uint32_t itsource = hspi->Instance->CR2; + uint32_t itflag = hspi->Instance->SR; + + /* SPI in mode Receiver ----------------------------------------------------*/ + if ((SPI_CHECK_FLAG(itflag, SPI_FLAG_OVR) == RESET) && + (SPI_CHECK_FLAG(itflag, SPI_FLAG_RXNE) != RESET) && (SPI_CHECK_IT_SOURCE(itsource, SPI_IT_RXNE) != RESET)) + { + hspi->RxISR(hspi); + return; + } + + /* SPI in mode Transmitter -------------------------------------------------*/ + if ((SPI_CHECK_FLAG(itflag, SPI_FLAG_TXE) != RESET) && (SPI_CHECK_IT_SOURCE(itsource, SPI_IT_TXE) != RESET)) + { + hspi->TxISR(hspi); + return; + } + + /* SPI in Error Treatment --------------------------------------------------*/ + if (((SPI_CHECK_FLAG(itflag, SPI_FLAG_MODF) != RESET) || (SPI_CHECK_FLAG(itflag, SPI_FLAG_OVR) != RESET) + || (SPI_CHECK_FLAG(itflag, SPI_FLAG_FRE) != RESET)) && (SPI_CHECK_IT_SOURCE(itsource, SPI_IT_ERR) != RESET)) + { + /* SPI Overrun error interrupt occurred ----------------------------------*/ + if (SPI_CHECK_FLAG(itflag, SPI_FLAG_OVR) != RESET) + { + if (hspi->State != HAL_SPI_STATE_BUSY_TX) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_OVR); + __HAL_SPI_CLEAR_OVRFLAG(hspi); + } + else + { + __HAL_SPI_CLEAR_OVRFLAG(hspi); + return; + } + } + + /* SPI Mode Fault error interrupt occurred -------------------------------*/ + if (SPI_CHECK_FLAG(itflag, SPI_FLAG_MODF) != RESET) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_MODF); + __HAL_SPI_CLEAR_MODFFLAG(hspi); + } + + /* SPI Frame error interrupt occurred ------------------------------------*/ + if (SPI_CHECK_FLAG(itflag, SPI_FLAG_FRE) != RESET) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_FRE); + __HAL_SPI_CLEAR_FREFLAG(hspi); + } + + if (hspi->ErrorCode != HAL_SPI_ERROR_NONE) + { + /* Disable all interrupts */ + __HAL_SPI_DISABLE_IT(hspi, SPI_IT_RXNE | SPI_IT_TXE | SPI_IT_ERR); + + hspi->State = HAL_SPI_STATE_READY; + /* Disable the SPI DMA requests if enabled */ + if ((HAL_IS_BIT_SET(itsource, SPI_CR2_TXDMAEN)) || (HAL_IS_BIT_SET(itsource, SPI_CR2_RXDMAEN))) + { + CLEAR_BIT(hspi->Instance->CR2, (SPI_CR2_TXDMAEN | SPI_CR2_RXDMAEN)); + + /* Abort the SPI DMA Rx channel */ + if (hspi->hdmarx != NULL) + { + /* Set the SPI DMA Abort callback : + will lead to call HAL_SPI_ErrorCallback() at end of DMA abort procedure */ + hspi->hdmarx->XferAbortCallback = SPI_DMAAbortOnError; + if (HAL_OK != HAL_DMA_Abort_IT(hspi->hdmarx)) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_ABORT); + } + } + /* Abort the SPI DMA Tx channel */ + if (hspi->hdmatx != NULL) + { + /* Set the SPI DMA Abort callback : + will lead to call HAL_SPI_ErrorCallback() at end of DMA abort procedure */ + hspi->hdmatx->XferAbortCallback = SPI_DMAAbortOnError; + if (HAL_OK != HAL_DMA_Abort_IT(hspi->hdmatx)) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_ABORT); + } + } + } + else + { + /* Call user error callback */ +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) + hspi->ErrorCallback(hspi); +#else + HAL_SPI_ErrorCallback(hspi); +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ + } + } + return; + } +} + +/** + * @brief Tx Transfer completed callback. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval None + */ +__weak void HAL_SPI_TxCpltCallback(SPI_HandleTypeDef *hspi) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hspi); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SPI_TxCpltCallback should be implemented in the user file + */ +} + +/** + * @brief Rx Transfer completed callback. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval None + */ +__weak void HAL_SPI_RxCpltCallback(SPI_HandleTypeDef *hspi) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hspi); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SPI_RxCpltCallback should be implemented in the user file + */ +} + +/** + * @brief Tx and Rx Transfer completed callback. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval None + */ +__weak void HAL_SPI_TxRxCpltCallback(SPI_HandleTypeDef *hspi) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hspi); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SPI_TxRxCpltCallback should be implemented in the user file + */ +} + +/** + * @brief Tx Half Transfer completed callback. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval None + */ +__weak void HAL_SPI_TxHalfCpltCallback(SPI_HandleTypeDef *hspi) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hspi); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SPI_TxHalfCpltCallback should be implemented in the user file + */ +} + +/** + * @brief Rx Half Transfer completed callback. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval None + */ +__weak void HAL_SPI_RxHalfCpltCallback(SPI_HandleTypeDef *hspi) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hspi); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SPI_RxHalfCpltCallback() should be implemented in the user file + */ +} + +/** + * @brief Tx and Rx Half Transfer callback. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval None + */ +__weak void HAL_SPI_TxRxHalfCpltCallback(SPI_HandleTypeDef *hspi) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hspi); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SPI_TxRxHalfCpltCallback() should be implemented in the user file + */ +} + +/** + * @brief SPI error callback. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval None + */ +__weak void HAL_SPI_ErrorCallback(SPI_HandleTypeDef *hspi) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hspi); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SPI_ErrorCallback should be implemented in the user file + */ + /* NOTE : The ErrorCode parameter in the hspi handle is updated by the SPI processes + and user can use HAL_SPI_GetError() API to check the latest error occurred + */ +} + +/** + * @brief SPI Abort Complete callback. + * @param hspi SPI handle. + * @retval None + */ +__weak void HAL_SPI_AbortCpltCallback(SPI_HandleTypeDef *hspi) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hspi); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SPI_AbortCpltCallback can be implemented in the user file. + */ +} + +/** + * @} + */ + +/** @defgroup SPI_Exported_Functions_Group3 Peripheral State and Errors functions + * @brief SPI control functions + * +@verbatim + =============================================================================== + ##### Peripheral State and Errors functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to control the SPI. + (+) HAL_SPI_GetState() API can be helpful to check in run-time the state of the SPI peripheral + (+) HAL_SPI_GetError() check in run-time Errors occurring during communication +@endverbatim + * @{ + */ + +/** + * @brief Return the SPI handle state. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval SPI state + */ +HAL_SPI_StateTypeDef HAL_SPI_GetState(const SPI_HandleTypeDef *hspi) +{ + /* Return SPI handle state */ + return hspi->State; +} + +/** + * @brief Return the SPI error code. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval SPI error code in bitmap format + */ +uint32_t HAL_SPI_GetError(const SPI_HandleTypeDef *hspi) +{ + /* Return SPI ErrorCode */ + return hspi->ErrorCode; +} + +/** + * @} + */ + +/** + * @} + */ + +/** @addtogroup SPI_Private_Functions + * @brief Private functions + * @{ + */ + +/** + * @brief DMA SPI transmit process complete callback. + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +static void SPI_DMATransmitCplt(DMA_HandleTypeDef *hdma) +{ + SPI_HandleTypeDef *hspi = (SPI_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); + uint32_t tickstart; + + /* Init tickstart for timeout management*/ + tickstart = HAL_GetTick(); + + /* DMA Normal Mode */ + if ((hdma->Instance->CCR & DMA_CCR_CIRC) != DMA_CCR_CIRC) + { + /* Disable ERR interrupt */ + __HAL_SPI_DISABLE_IT(hspi, SPI_IT_ERR); + + /* Disable Tx DMA Request */ + CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_TXDMAEN); + + /* Check the end of the transaction */ + if (SPI_EndRxTxTransaction(hspi, SPI_DEFAULT_TIMEOUT, tickstart) != HAL_OK) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_FLAG); + } + + /* Clear overrun flag in 2 Lines communication mode because received data is not read */ + if (hspi->Init.Direction == SPI_DIRECTION_2LINES) + { + __HAL_SPI_CLEAR_OVRFLAG(hspi); + } + + hspi->TxXferCount = 0U; + hspi->State = HAL_SPI_STATE_READY; + + if (hspi->ErrorCode != HAL_SPI_ERROR_NONE) + { + /* Call user error callback */ +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) + hspi->ErrorCallback(hspi); +#else + HAL_SPI_ErrorCallback(hspi); +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ + return; + } + } + /* Call user Tx complete callback */ +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) + hspi->TxCpltCallback(hspi); +#else + HAL_SPI_TxCpltCallback(hspi); +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ +} + +/** + * @brief DMA SPI receive process complete callback. + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +static void SPI_DMAReceiveCplt(DMA_HandleTypeDef *hdma) +{ + SPI_HandleTypeDef *hspi = (SPI_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); + uint32_t tickstart; +#if (USE_SPI_CRC != 0U) + __IO uint32_t tmpreg = 0U; + __IO uint8_t *ptmpreg8; + __IO uint8_t tmpreg8 = 0; +#endif /* USE_SPI_CRC */ + + /* Init tickstart for timeout management*/ + tickstart = HAL_GetTick(); + + /* DMA Normal Mode */ + if ((hdma->Instance->CCR & DMA_CCR_CIRC) != DMA_CCR_CIRC) + { + /* Disable ERR interrupt */ + __HAL_SPI_DISABLE_IT(hspi, SPI_IT_ERR); + +#if (USE_SPI_CRC != 0U) + /* CRC handling */ + if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + /* Wait until RXNE flag */ + if (SPI_WaitFlagStateUntilTimeout(hspi, SPI_FLAG_RXNE, SET, SPI_DEFAULT_TIMEOUT, tickstart) != HAL_OK) + { + /* Error on the CRC reception */ + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_CRC); + } + /* Read CRC */ + if (hspi->Init.DataSize > SPI_DATASIZE_8BIT) + { + /* Read 16bit CRC */ + tmpreg = READ_REG(hspi->Instance->DR); + /* To avoid GCC warning */ + UNUSED(tmpreg); + } + else + { + /* Initialize the 8bit temporary pointer */ + ptmpreg8 = (__IO uint8_t *)&hspi->Instance->DR; + /* Read 8bit CRC */ + tmpreg8 = *ptmpreg8; + /* To avoid GCC warning */ + UNUSED(tmpreg8); + + if (hspi->Init.CRCLength == SPI_CRC_LENGTH_16BIT) + { + if (SPI_WaitFlagStateUntilTimeout(hspi, SPI_FLAG_RXNE, SET, SPI_DEFAULT_TIMEOUT, tickstart) != HAL_OK) + { + /* Error on the CRC reception */ + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_CRC); + } + /* Read 8bit CRC again in case of 16bit CRC in 8bit Data mode */ + tmpreg8 = *ptmpreg8; + /* To avoid GCC warning */ + UNUSED(tmpreg8); + } + } + } +#endif /* USE_SPI_CRC */ + + /* Check if we are in Master RX 2 line mode */ + if ((hspi->Init.Direction == SPI_DIRECTION_2LINES) && (hspi->Init.Mode == SPI_MODE_MASTER)) + { + /* Disable Rx/Tx DMA Request (done by default to handle the case master rx direction 2 lines) */ + CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_TXDMAEN | SPI_CR2_RXDMAEN); + } + else + { + /* Normal case */ + CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_RXDMAEN); + } + + /* Check the end of the transaction */ + if (SPI_EndRxTransaction(hspi, SPI_DEFAULT_TIMEOUT, tickstart) != HAL_OK) + { + hspi->ErrorCode = HAL_SPI_ERROR_FLAG; + } + + hspi->RxXferCount = 0U; + hspi->State = HAL_SPI_STATE_READY; + +#if (USE_SPI_CRC != 0U) + /* Check if CRC error occurred */ + if (__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_CRCERR)) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_CRC); + __HAL_SPI_CLEAR_CRCERRFLAG(hspi); + } +#endif /* USE_SPI_CRC */ + + if (hspi->ErrorCode != HAL_SPI_ERROR_NONE) + { + /* Call user error callback */ +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) + hspi->ErrorCallback(hspi); +#else + HAL_SPI_ErrorCallback(hspi); +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ + return; + } + } + /* Call user Rx complete callback */ +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) + hspi->RxCpltCallback(hspi); +#else + HAL_SPI_RxCpltCallback(hspi); +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ +} + +/** + * @brief DMA SPI transmit receive process complete callback. + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +static void SPI_DMATransmitReceiveCplt(DMA_HandleTypeDef *hdma) +{ + SPI_HandleTypeDef *hspi = (SPI_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); + uint32_t tickstart; +#if (USE_SPI_CRC != 0U) + __IO uint32_t tmpreg = 0U; + __IO uint8_t *ptmpreg8; + __IO uint8_t tmpreg8 = 0; +#endif /* USE_SPI_CRC */ + + /* Init tickstart for timeout management*/ + tickstart = HAL_GetTick(); + + /* DMA Normal Mode */ + if ((hdma->Instance->CCR & DMA_CCR_CIRC) != DMA_CCR_CIRC) + { + /* Disable ERR interrupt */ + __HAL_SPI_DISABLE_IT(hspi, SPI_IT_ERR); + +#if (USE_SPI_CRC != 0U) + /* CRC handling */ + if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + if ((hspi->Init.DataSize == SPI_DATASIZE_8BIT) && (hspi->Init.CRCLength == SPI_CRC_LENGTH_8BIT)) + { + if (SPI_WaitFifoStateUntilTimeout(hspi, SPI_FLAG_FRLVL, SPI_FRLVL_QUARTER_FULL, SPI_DEFAULT_TIMEOUT, + tickstart) != HAL_OK) + { + /* Error on the CRC reception */ + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_CRC); + } + /* Initialize the 8bit temporary pointer */ + ptmpreg8 = (__IO uint8_t *)&hspi->Instance->DR; + /* Read 8bit CRC */ + tmpreg8 = *ptmpreg8; + /* To avoid GCC warning */ + UNUSED(tmpreg8); + } + else + { + if (SPI_WaitFifoStateUntilTimeout(hspi, SPI_FLAG_FRLVL, SPI_FRLVL_HALF_FULL, SPI_DEFAULT_TIMEOUT, + tickstart) != HAL_OK) + { + /* Error on the CRC reception */ + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_CRC); + } + /* Read CRC to Flush DR and RXNE flag */ + tmpreg = READ_REG(hspi->Instance->DR); + /* To avoid GCC warning */ + UNUSED(tmpreg); + } + } +#endif /* USE_SPI_CRC */ + + /* Check the end of the transaction */ + if (SPI_EndRxTxTransaction(hspi, SPI_DEFAULT_TIMEOUT, tickstart) != HAL_OK) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_FLAG); + } + + /* Disable Rx/Tx DMA Request */ + CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_TXDMAEN | SPI_CR2_RXDMAEN); + + hspi->TxXferCount = 0U; + hspi->RxXferCount = 0U; + hspi->State = HAL_SPI_STATE_READY; + +#if (USE_SPI_CRC != 0U) + /* Check if CRC error occurred */ + if (__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_CRCERR)) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_CRC); + __HAL_SPI_CLEAR_CRCERRFLAG(hspi); + } +#endif /* USE_SPI_CRC */ + + if (hspi->ErrorCode != HAL_SPI_ERROR_NONE) + { + /* Call user error callback */ +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) + hspi->ErrorCallback(hspi); +#else + HAL_SPI_ErrorCallback(hspi); +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ + return; + } + } + /* Call user TxRx complete callback */ +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) + hspi->TxRxCpltCallback(hspi); +#else + HAL_SPI_TxRxCpltCallback(hspi); +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ +} + +/** + * @brief DMA SPI half transmit process complete callback. + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +static void SPI_DMAHalfTransmitCplt(DMA_HandleTypeDef *hdma) +{ + SPI_HandleTypeDef *hspi = (SPI_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); + + /* Call user Tx half complete callback */ +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) + hspi->TxHalfCpltCallback(hspi); +#else + HAL_SPI_TxHalfCpltCallback(hspi); +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ +} + +/** + * @brief DMA SPI half receive process complete callback + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +static void SPI_DMAHalfReceiveCplt(DMA_HandleTypeDef *hdma) +{ + SPI_HandleTypeDef *hspi = (SPI_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); + + /* Call user Rx half complete callback */ +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) + hspi->RxHalfCpltCallback(hspi); +#else + HAL_SPI_RxHalfCpltCallback(hspi); +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ +} + +/** + * @brief DMA SPI half transmit receive process complete callback. + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +static void SPI_DMAHalfTransmitReceiveCplt(DMA_HandleTypeDef *hdma) +{ + SPI_HandleTypeDef *hspi = (SPI_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); + + /* Call user TxRx half complete callback */ +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) + hspi->TxRxHalfCpltCallback(hspi); +#else + HAL_SPI_TxRxHalfCpltCallback(hspi); +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ +} + +/** + * @brief DMA SPI communication error callback. + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +static void SPI_DMAError(DMA_HandleTypeDef *hdma) +{ + SPI_HandleTypeDef *hspi = (SPI_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); + + /* Stop the disable DMA transfer on SPI side */ + CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_TXDMAEN | SPI_CR2_RXDMAEN); + + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_DMA); + hspi->State = HAL_SPI_STATE_READY; + /* Call user error callback */ +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) + hspi->ErrorCallback(hspi); +#else + HAL_SPI_ErrorCallback(hspi); +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ +} + +/** + * @brief DMA SPI communication abort callback, when initiated by HAL services on Error + * (To be called at end of DMA Abort procedure following error occurrence). + * @param hdma DMA handle. + * @retval None + */ +static void SPI_DMAAbortOnError(DMA_HandleTypeDef *hdma) +{ + SPI_HandleTypeDef *hspi = (SPI_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); + hspi->RxXferCount = 0U; + hspi->TxXferCount = 0U; + + /* Call user error callback */ +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) + hspi->ErrorCallback(hspi); +#else + HAL_SPI_ErrorCallback(hspi); +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ +} + +/** + * @brief DMA SPI Tx communication abort callback, when initiated by user + * (To be called at end of DMA Tx Abort procedure following user abort request). + * @note When this callback is executed, User Abort complete call back is called only if no + * Abort still ongoing for Rx DMA Handle. + * @param hdma DMA handle. + * @retval None + */ +static void SPI_DMATxAbortCallback(DMA_HandleTypeDef *hdma) +{ + SPI_HandleTypeDef *hspi = (SPI_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); + + hspi->hdmatx->XferAbortCallback = NULL; + + /* Disable Tx DMA Request */ + CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_TXDMAEN); + + if (SPI_EndRxTxTransaction(hspi, SPI_DEFAULT_TIMEOUT, HAL_GetTick()) != HAL_OK) + { + hspi->ErrorCode = HAL_SPI_ERROR_ABORT; + } + + /* Disable SPI Peripheral */ + __HAL_SPI_DISABLE(hspi); + + /* Empty the FRLVL fifo */ + if (SPI_WaitFifoStateUntilTimeout(hspi, SPI_FLAG_FRLVL, SPI_FRLVL_EMPTY, SPI_DEFAULT_TIMEOUT, + HAL_GetTick()) != HAL_OK) + { + hspi->ErrorCode = HAL_SPI_ERROR_ABORT; + } + + /* Check if an Abort process is still ongoing */ + if (hspi->hdmarx != NULL) + { + if (hspi->hdmarx->XferAbortCallback != NULL) + { + return; + } + } + + /* No Abort process still ongoing : All DMA Stream/Channel are aborted, call user Abort Complete callback */ + hspi->RxXferCount = 0U; + hspi->TxXferCount = 0U; + + /* Check no error during Abort procedure */ + if (hspi->ErrorCode != HAL_SPI_ERROR_ABORT) + { + /* Reset errorCode */ + hspi->ErrorCode = HAL_SPI_ERROR_NONE; + } + + /* Clear the Error flags in the SR register */ + __HAL_SPI_CLEAR_OVRFLAG(hspi); + __HAL_SPI_CLEAR_FREFLAG(hspi); + + /* Restore hspi->State to Ready */ + hspi->State = HAL_SPI_STATE_READY; + + /* Call user Abort complete callback */ +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) + hspi->AbortCpltCallback(hspi); +#else + HAL_SPI_AbortCpltCallback(hspi); +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ +} + +/** + * @brief DMA SPI Rx communication abort callback, when initiated by user + * (To be called at end of DMA Rx Abort procedure following user abort request). + * @note When this callback is executed, User Abort complete call back is called only if no + * Abort still ongoing for Tx DMA Handle. + * @param hdma DMA handle. + * @retval None + */ +static void SPI_DMARxAbortCallback(DMA_HandleTypeDef *hdma) +{ + SPI_HandleTypeDef *hspi = (SPI_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); + + /* Disable SPI Peripheral */ + __HAL_SPI_DISABLE(hspi); + + hspi->hdmarx->XferAbortCallback = NULL; + + /* Disable Rx DMA Request */ + CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_RXDMAEN); + + /* Control the BSY flag */ + if (SPI_WaitFlagStateUntilTimeout(hspi, SPI_FLAG_BSY, RESET, SPI_DEFAULT_TIMEOUT, HAL_GetTick()) != HAL_OK) + { + hspi->ErrorCode = HAL_SPI_ERROR_ABORT; + } + + /* Empty the FRLVL fifo */ + if (SPI_WaitFifoStateUntilTimeout(hspi, SPI_FLAG_FRLVL, SPI_FRLVL_EMPTY, SPI_DEFAULT_TIMEOUT, + HAL_GetTick()) != HAL_OK) + { + hspi->ErrorCode = HAL_SPI_ERROR_ABORT; + } + + /* Check if an Abort process is still ongoing */ + if (hspi->hdmatx != NULL) + { + if (hspi->hdmatx->XferAbortCallback != NULL) + { + return; + } + } + + /* No Abort process still ongoing : All DMA Stream/Channel are aborted, call user Abort Complete callback */ + hspi->RxXferCount = 0U; + hspi->TxXferCount = 0U; + + /* Check no error during Abort procedure */ + if (hspi->ErrorCode != HAL_SPI_ERROR_ABORT) + { + /* Reset errorCode */ + hspi->ErrorCode = HAL_SPI_ERROR_NONE; + } + + /* Clear the Error flags in the SR register */ + __HAL_SPI_CLEAR_OVRFLAG(hspi); + __HAL_SPI_CLEAR_FREFLAG(hspi); + + /* Restore hspi->State to Ready */ + hspi->State = HAL_SPI_STATE_READY; + + /* Call user Abort complete callback */ +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) + hspi->AbortCpltCallback(hspi); +#else + HAL_SPI_AbortCpltCallback(hspi); +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ +} + +/** + * @brief Rx 8-bit handler for Transmit and Receive in Interrupt mode. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval None + */ +static void SPI_2linesRxISR_8BIT(struct __SPI_HandleTypeDef *hspi) +{ + /* Receive data in packing mode */ + if (hspi->RxXferCount > 1U) + { + *((uint16_t *)hspi->pRxBuffPtr) = (uint16_t)(hspi->Instance->DR); + hspi->pRxBuffPtr += sizeof(uint16_t); + hspi->RxXferCount -= 2U; + if (hspi->RxXferCount == 1U) + { + /* Set RX Fifo threshold according the reception data length: 8bit */ + SET_BIT(hspi->Instance->CR2, SPI_RXFIFO_THRESHOLD); + } + } + /* Receive data in 8 Bit mode */ + else + { + *hspi->pRxBuffPtr = *((__IO uint8_t *)&hspi->Instance->DR); + hspi->pRxBuffPtr++; + hspi->RxXferCount--; + } + + /* Check end of the reception */ + if (hspi->RxXferCount == 0U) + { +#if (USE_SPI_CRC != 0U) + if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + SET_BIT(hspi->Instance->CR2, SPI_RXFIFO_THRESHOLD); + hspi->RxISR = SPI_2linesRxISR_8BITCRC; + return; + } +#endif /* USE_SPI_CRC */ + + /* Disable RXNE and ERR interrupt */ + __HAL_SPI_DISABLE_IT(hspi, (SPI_IT_RXNE | SPI_IT_ERR)); + + if (hspi->TxXferCount == 0U) + { + SPI_CloseRxTx_ISR(hspi); + } + } +} + +#if (USE_SPI_CRC != 0U) +/** + * @brief Rx 8-bit handler for Transmit and Receive in Interrupt mode. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval None + */ +static void SPI_2linesRxISR_8BITCRC(struct __SPI_HandleTypeDef *hspi) +{ + __IO uint8_t *ptmpreg8; + __IO uint8_t tmpreg8 = 0; + + /* Initialize the 8bit temporary pointer */ + ptmpreg8 = (__IO uint8_t *)&hspi->Instance->DR; + /* Read 8bit CRC to flush Data Register */ + tmpreg8 = *ptmpreg8; + /* To avoid GCC warning */ + UNUSED(tmpreg8); + + hspi->CRCSize--; + + /* Check end of the reception */ + if (hspi->CRCSize == 0U) + { + /* Disable RXNE and ERR interrupt */ + __HAL_SPI_DISABLE_IT(hspi, (SPI_IT_RXNE | SPI_IT_ERR)); + + if (hspi->TxXferCount == 0U) + { + SPI_CloseRxTx_ISR(hspi); + } + } +} +#endif /* USE_SPI_CRC */ + +/** + * @brief Tx 8-bit handler for Transmit and Receive in Interrupt mode. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval None + */ +static void SPI_2linesTxISR_8BIT(struct __SPI_HandleTypeDef *hspi) +{ + /* Transmit data in packing Bit mode */ + if (hspi->TxXferCount >= 2U) + { + hspi->Instance->DR = *((const uint16_t *)hspi->pTxBuffPtr); + hspi->pTxBuffPtr += sizeof(uint16_t); + hspi->TxXferCount -= 2U; + } + /* Transmit data in 8 Bit mode */ + else + { + *(__IO uint8_t *)&hspi->Instance->DR = *((const uint8_t *)hspi->pTxBuffPtr); + hspi->pTxBuffPtr++; + hspi->TxXferCount--; + } + + /* Check the end of the transmission */ + if (hspi->TxXferCount == 0U) + { +#if (USE_SPI_CRC != 0U) + if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + /* Set CRC Next Bit to send CRC */ + SET_BIT(hspi->Instance->CR1, SPI_CR1_CRCNEXT); + /* Disable TXE interrupt */ + __HAL_SPI_DISABLE_IT(hspi, SPI_IT_TXE); + return; + } +#endif /* USE_SPI_CRC */ + + /* Disable TXE interrupt */ + __HAL_SPI_DISABLE_IT(hspi, SPI_IT_TXE); + + if (hspi->RxXferCount == 0U) + { + SPI_CloseRxTx_ISR(hspi); + } + } +} + +/** + * @brief Rx 16-bit handler for Transmit and Receive in Interrupt mode. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval None + */ +static void SPI_2linesRxISR_16BIT(struct __SPI_HandleTypeDef *hspi) +{ + /* Receive data in 16 Bit mode */ + *((uint16_t *)hspi->pRxBuffPtr) = (uint16_t)(hspi->Instance->DR); + hspi->pRxBuffPtr += sizeof(uint16_t); + hspi->RxXferCount--; + + if (hspi->RxXferCount == 0U) + { +#if (USE_SPI_CRC != 0U) + if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + hspi->RxISR = SPI_2linesRxISR_16BITCRC; + return; + } +#endif /* USE_SPI_CRC */ + + /* Disable RXNE interrupt */ + __HAL_SPI_DISABLE_IT(hspi, SPI_IT_RXNE); + + if (hspi->TxXferCount == 0U) + { + SPI_CloseRxTx_ISR(hspi); + } + } +} + +#if (USE_SPI_CRC != 0U) +/** + * @brief Manage the CRC 16-bit receive for Transmit and Receive in Interrupt mode. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval None + */ +static void SPI_2linesRxISR_16BITCRC(struct __SPI_HandleTypeDef *hspi) +{ + __IO uint32_t tmpreg = 0U; + + /* Read 16bit CRC to flush Data Register */ + tmpreg = READ_REG(hspi->Instance->DR); + /* To avoid GCC warning */ + UNUSED(tmpreg); + + /* Disable RXNE interrupt */ + __HAL_SPI_DISABLE_IT(hspi, SPI_IT_RXNE); + + SPI_CloseRxTx_ISR(hspi); +} +#endif /* USE_SPI_CRC */ + +/** + * @brief Tx 16-bit handler for Transmit and Receive in Interrupt mode. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval None + */ +static void SPI_2linesTxISR_16BIT(struct __SPI_HandleTypeDef *hspi) +{ + /* Transmit data in 16 Bit mode */ + hspi->Instance->DR = *((const uint16_t *)hspi->pTxBuffPtr); + hspi->pTxBuffPtr += sizeof(uint16_t); + hspi->TxXferCount--; + + /* Enable CRC Transmission */ + if (hspi->TxXferCount == 0U) + { +#if (USE_SPI_CRC != 0U) + if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + /* Set CRC Next Bit to send CRC */ + SET_BIT(hspi->Instance->CR1, SPI_CR1_CRCNEXT); + /* Disable TXE interrupt */ + __HAL_SPI_DISABLE_IT(hspi, SPI_IT_TXE); + return; + } +#endif /* USE_SPI_CRC */ + + /* Disable TXE interrupt */ + __HAL_SPI_DISABLE_IT(hspi, SPI_IT_TXE); + + if (hspi->RxXferCount == 0U) + { + SPI_CloseRxTx_ISR(hspi); + } + } +} + +#if (USE_SPI_CRC != 0U) +/** + * @brief Manage the CRC 8-bit receive in Interrupt context. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval None + */ +static void SPI_RxISR_8BITCRC(struct __SPI_HandleTypeDef *hspi) +{ + __IO uint8_t *ptmpreg8; + __IO uint8_t tmpreg8 = 0; + + /* Initialize the 8bit temporary pointer */ + ptmpreg8 = (__IO uint8_t *)&hspi->Instance->DR; + /* Read 8bit CRC to flush Data Register */ + tmpreg8 = *ptmpreg8; + /* To avoid GCC warning */ + UNUSED(tmpreg8); + + hspi->CRCSize--; + + if (hspi->CRCSize == 0U) + { + SPI_CloseRx_ISR(hspi); + } +} +#endif /* USE_SPI_CRC */ + +/** + * @brief Manage the receive 8-bit in Interrupt context. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval None + */ +static void SPI_RxISR_8BIT(struct __SPI_HandleTypeDef *hspi) +{ + *hspi->pRxBuffPtr = (*(__IO uint8_t *)&hspi->Instance->DR); + hspi->pRxBuffPtr++; + hspi->RxXferCount--; + +#if (USE_SPI_CRC != 0U) + /* Enable CRC Transmission */ + if ((hspi->RxXferCount == 1U) && (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)) + { + SET_BIT(hspi->Instance->CR1, SPI_CR1_CRCNEXT); + } +#endif /* USE_SPI_CRC */ + + if (hspi->RxXferCount == 0U) + { +#if (USE_SPI_CRC != 0U) + if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + hspi->RxISR = SPI_RxISR_8BITCRC; + return; + } +#endif /* USE_SPI_CRC */ + SPI_CloseRx_ISR(hspi); + } +} + +#if (USE_SPI_CRC != 0U) +/** + * @brief Manage the CRC 16-bit receive in Interrupt context. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval None + */ +static void SPI_RxISR_16BITCRC(struct __SPI_HandleTypeDef *hspi) +{ + __IO uint32_t tmpreg = 0U; + + /* Read 16bit CRC to flush Data Register */ + tmpreg = READ_REG(hspi->Instance->DR); + /* To avoid GCC warning */ + UNUSED(tmpreg); + + /* Disable RXNE and ERR interrupt */ + __HAL_SPI_DISABLE_IT(hspi, (SPI_IT_RXNE | SPI_IT_ERR)); + + SPI_CloseRx_ISR(hspi); +} +#endif /* USE_SPI_CRC */ + +/** + * @brief Manage the 16-bit receive in Interrupt context. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval None + */ +static void SPI_RxISR_16BIT(struct __SPI_HandleTypeDef *hspi) +{ + *((uint16_t *)hspi->pRxBuffPtr) = (uint16_t)(hspi->Instance->DR); + hspi->pRxBuffPtr += sizeof(uint16_t); + hspi->RxXferCount--; + +#if (USE_SPI_CRC != 0U) + /* Enable CRC Transmission */ + if ((hspi->RxXferCount == 1U) && (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)) + { + SET_BIT(hspi->Instance->CR1, SPI_CR1_CRCNEXT); + } +#endif /* USE_SPI_CRC */ + + if (hspi->RxXferCount == 0U) + { +#if (USE_SPI_CRC != 0U) + if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + hspi->RxISR = SPI_RxISR_16BITCRC; + return; + } +#endif /* USE_SPI_CRC */ + SPI_CloseRx_ISR(hspi); + } +} + +/** + * @brief Handle the data 8-bit transmit in Interrupt mode. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval None + */ +static void SPI_TxISR_8BIT(struct __SPI_HandleTypeDef *hspi) +{ + *(__IO uint8_t *)&hspi->Instance->DR = *((const uint8_t *)hspi->pTxBuffPtr); + hspi->pTxBuffPtr++; + hspi->TxXferCount--; + + if (hspi->TxXferCount == 0U) + { +#if (USE_SPI_CRC != 0U) + if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + /* Enable CRC Transmission */ + SET_BIT(hspi->Instance->CR1, SPI_CR1_CRCNEXT); + } +#endif /* USE_SPI_CRC */ + SPI_CloseTx_ISR(hspi); + } +} + +/** + * @brief Handle the data 16-bit transmit in Interrupt mode. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval None + */ +static void SPI_TxISR_16BIT(struct __SPI_HandleTypeDef *hspi) +{ + /* Transmit data in 16 Bit mode */ + hspi->Instance->DR = *((const uint16_t *)hspi->pTxBuffPtr); + hspi->pTxBuffPtr += sizeof(uint16_t); + hspi->TxXferCount--; + + if (hspi->TxXferCount == 0U) + { +#if (USE_SPI_CRC != 0U) + if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + /* Enable CRC Transmission */ + SET_BIT(hspi->Instance->CR1, SPI_CR1_CRCNEXT); + } +#endif /* USE_SPI_CRC */ + SPI_CloseTx_ISR(hspi); + } +} + +/** + * @brief Handle SPI Communication Timeout. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @param Flag SPI flag to check + * @param State flag state to check + * @param Timeout Timeout duration + * @param Tickstart tick start value + * @retval HAL status + */ +static HAL_StatusTypeDef SPI_WaitFlagStateUntilTimeout(SPI_HandleTypeDef *hspi, uint32_t Flag, FlagStatus State, + uint32_t Timeout, uint32_t Tickstart) +{ + __IO uint32_t count; + uint32_t tmp_timeout; + uint32_t tmp_tickstart; + + /* Adjust Timeout value in case of end of transfer */ + tmp_timeout = Timeout - (HAL_GetTick() - Tickstart); + tmp_tickstart = HAL_GetTick(); + + /* Calculate Timeout based on a software loop to avoid blocking issue if Systick is disabled */ + count = tmp_timeout * ((SystemCoreClock * 32U) >> 20U); + + while ((__HAL_SPI_GET_FLAG(hspi, Flag) ? SET : RESET) != State) + { + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - tmp_tickstart) >= tmp_timeout) || (tmp_timeout == 0U)) + { + /* Disable the SPI and reset the CRC: the CRC value should be cleared + on both master and slave sides in order to resynchronize the master + and slave for their respective CRC calculation */ + + /* Disable TXE, RXNE and ERR interrupts for the interrupt process */ + __HAL_SPI_DISABLE_IT(hspi, (SPI_IT_TXE | SPI_IT_RXNE | SPI_IT_ERR)); + + if ((hspi->Init.Mode == SPI_MODE_MASTER) && ((hspi->Init.Direction == SPI_DIRECTION_1LINE) + || (hspi->Init.Direction == SPI_DIRECTION_2LINES_RXONLY))) + { + /* Disable SPI peripheral */ + __HAL_SPI_DISABLE(hspi); + } + + /* Reset CRC Calculation */ + if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + SPI_RESET_CRC(hspi); + } + + hspi->State = HAL_SPI_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hspi); + + return HAL_TIMEOUT; + } + /* If Systick is disabled or not incremented, deactivate timeout to go in disable loop procedure */ + if (count == 0U) + { + tmp_timeout = 0U; + } + count--; + } + } + + return HAL_OK; +} + +/** + * @brief Handle SPI FIFO Communication Timeout. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @param Fifo Fifo to check + * @param State Fifo state to check + * @param Timeout Timeout duration + * @param Tickstart tick start value + * @retval HAL status + */ +static HAL_StatusTypeDef SPI_WaitFifoStateUntilTimeout(SPI_HandleTypeDef *hspi, uint32_t Fifo, uint32_t State, + uint32_t Timeout, uint32_t Tickstart) +{ + __IO uint32_t count; + uint32_t tmp_timeout; + uint32_t tmp_tickstart; + __IO const uint8_t *ptmpreg8; + __IO uint8_t tmpreg8 = 0; + + /* Adjust Timeout value in case of end of transfer */ + tmp_timeout = Timeout - (HAL_GetTick() - Tickstart); + tmp_tickstart = HAL_GetTick(); + + /* Initialize the 8bit temporary pointer */ + ptmpreg8 = (__IO uint8_t *)&hspi->Instance->DR; + + /* Calculate Timeout based on a software loop to avoid blocking issue if Systick is disabled */ + count = tmp_timeout * ((SystemCoreClock * 35U) >> 20U); + + while ((hspi->Instance->SR & Fifo) != State) + { + if ((Fifo == SPI_SR_FRLVL) && (State == SPI_FRLVL_EMPTY)) + { + /* Flush Data Register by a blank read */ + tmpreg8 = *ptmpreg8; + /* To avoid GCC warning */ + UNUSED(tmpreg8); + } + + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - tmp_tickstart) >= tmp_timeout) || (tmp_timeout == 0U)) + { + /* Disable the SPI and reset the CRC: the CRC value should be cleared + on both master and slave sides in order to resynchronize the master + and slave for their respective CRC calculation */ + + /* Disable TXE, RXNE and ERR interrupts for the interrupt process */ + __HAL_SPI_DISABLE_IT(hspi, (SPI_IT_TXE | SPI_IT_RXNE | SPI_IT_ERR)); + + if ((hspi->Init.Mode == SPI_MODE_MASTER) && ((hspi->Init.Direction == SPI_DIRECTION_1LINE) + || (hspi->Init.Direction == SPI_DIRECTION_2LINES_RXONLY))) + { + /* Disable SPI peripheral */ + __HAL_SPI_DISABLE(hspi); + } + + /* Reset CRC Calculation */ + if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + SPI_RESET_CRC(hspi); + } + + hspi->State = HAL_SPI_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hspi); + + return HAL_TIMEOUT; + } + /* If Systick is disabled or not incremented, deactivate timeout to go in disable loop procedure */ + if (count == 0U) + { + tmp_timeout = 0U; + } + count--; + } + } + + return HAL_OK; +} + +/** + * @brief Handle the check of the RX transaction complete. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @param Timeout Timeout duration + * @param Tickstart tick start value + * @retval HAL status + */ +static HAL_StatusTypeDef SPI_EndRxTransaction(SPI_HandleTypeDef *hspi, uint32_t Timeout, uint32_t Tickstart) +{ + if ((hspi->Init.Mode == SPI_MODE_MASTER) && ((hspi->Init.Direction == SPI_DIRECTION_1LINE) + || (hspi->Init.Direction == SPI_DIRECTION_2LINES_RXONLY))) + { + /* Disable SPI peripheral */ + __HAL_SPI_DISABLE(hspi); + } + + /* Control the BSY flag */ + if (SPI_WaitFlagStateUntilTimeout(hspi, SPI_FLAG_BSY, RESET, Timeout, Tickstart) != HAL_OK) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_FLAG); + return HAL_TIMEOUT; + } + + if ((hspi->Init.Mode == SPI_MODE_MASTER) && ((hspi->Init.Direction == SPI_DIRECTION_1LINE) + || (hspi->Init.Direction == SPI_DIRECTION_2LINES_RXONLY))) + { + /* Empty the FRLVL fifo */ + if (SPI_WaitFifoStateUntilTimeout(hspi, SPI_FLAG_FRLVL, SPI_FRLVL_EMPTY, Timeout, Tickstart) != HAL_OK) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_FLAG); + return HAL_TIMEOUT; + } + } + return HAL_OK; +} + +/** + * @brief Handle the check of the RXTX or TX transaction complete. + * @param hspi SPI handle + * @param Timeout Timeout duration + * @param Tickstart tick start value + * @retval HAL status + */ +static HAL_StatusTypeDef SPI_EndRxTxTransaction(SPI_HandleTypeDef *hspi, uint32_t Timeout, uint32_t Tickstart) +{ + /* Control if the TX fifo is empty */ + if (SPI_WaitFifoStateUntilTimeout(hspi, SPI_FLAG_FTLVL, SPI_FTLVL_EMPTY, Timeout, Tickstart) != HAL_OK) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_FLAG); + return HAL_TIMEOUT; + } + + /* Control the BSY flag */ + if (SPI_WaitFlagStateUntilTimeout(hspi, SPI_FLAG_BSY, RESET, Timeout, Tickstart) != HAL_OK) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_FLAG); + return HAL_TIMEOUT; + } + + /* Control if the RX fifo is empty */ + if (SPI_WaitFifoStateUntilTimeout(hspi, SPI_FLAG_FRLVL, SPI_FRLVL_EMPTY, Timeout, Tickstart) != HAL_OK) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_FLAG); + return HAL_TIMEOUT; + } + + return HAL_OK; +} + +/** + * @brief Handle the end of the RXTX transaction. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval None + */ +static void SPI_CloseRxTx_ISR(SPI_HandleTypeDef *hspi) +{ + uint32_t tickstart; + + /* Init tickstart for timeout management */ + tickstart = HAL_GetTick(); + + /* Disable ERR interrupt */ + __HAL_SPI_DISABLE_IT(hspi, SPI_IT_ERR); + + /* Check the end of the transaction */ + if (SPI_EndRxTxTransaction(hspi, SPI_DEFAULT_TIMEOUT, tickstart) != HAL_OK) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_FLAG); + } + +#if (USE_SPI_CRC != 0U) + /* Check if CRC error occurred */ + if (__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_CRCERR) != RESET) + { + hspi->State = HAL_SPI_STATE_READY; + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_CRC); + __HAL_SPI_CLEAR_CRCERRFLAG(hspi); + /* Call user error callback */ +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) + hspi->ErrorCallback(hspi); +#else + HAL_SPI_ErrorCallback(hspi); +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ + } + else + { +#endif /* USE_SPI_CRC */ + if (hspi->ErrorCode == HAL_SPI_ERROR_NONE) + { + if (hspi->State == HAL_SPI_STATE_BUSY_RX) + { + hspi->State = HAL_SPI_STATE_READY; + /* Call user Rx complete callback */ +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) + hspi->RxCpltCallback(hspi); +#else + HAL_SPI_RxCpltCallback(hspi); +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ + } + else + { + hspi->State = HAL_SPI_STATE_READY; + /* Call user TxRx complete callback */ +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) + hspi->TxRxCpltCallback(hspi); +#else + HAL_SPI_TxRxCpltCallback(hspi); +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ + } + } + else + { + hspi->State = HAL_SPI_STATE_READY; + /* Call user error callback */ +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) + hspi->ErrorCallback(hspi); +#else + HAL_SPI_ErrorCallback(hspi); +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ + } +#if (USE_SPI_CRC != 0U) + } +#endif /* USE_SPI_CRC */ +} + +/** + * @brief Handle the end of the RX transaction. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval None + */ +static void SPI_CloseRx_ISR(SPI_HandleTypeDef *hspi) +{ + /* Disable RXNE and ERR interrupt */ + __HAL_SPI_DISABLE_IT(hspi, (SPI_IT_RXNE | SPI_IT_ERR)); + + /* Check the end of the transaction */ + if (SPI_EndRxTransaction(hspi, SPI_DEFAULT_TIMEOUT, HAL_GetTick()) != HAL_OK) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_FLAG); + } + hspi->State = HAL_SPI_STATE_READY; + +#if (USE_SPI_CRC != 0U) + /* Check if CRC error occurred */ + if (__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_CRCERR) != RESET) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_CRC); + __HAL_SPI_CLEAR_CRCERRFLAG(hspi); + /* Call user error callback */ +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) + hspi->ErrorCallback(hspi); +#else + HAL_SPI_ErrorCallback(hspi); +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ + } + else + { +#endif /* USE_SPI_CRC */ + if (hspi->ErrorCode == HAL_SPI_ERROR_NONE) + { + /* Call user Rx complete callback */ +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) + hspi->RxCpltCallback(hspi); +#else + HAL_SPI_RxCpltCallback(hspi); +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ + } + else + { + /* Call user error callback */ +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) + hspi->ErrorCallback(hspi); +#else + HAL_SPI_ErrorCallback(hspi); +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ + } +#if (USE_SPI_CRC != 0U) + } +#endif /* USE_SPI_CRC */ +} + +/** + * @brief Handle the end of the TX transaction. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval None + */ +static void SPI_CloseTx_ISR(SPI_HandleTypeDef *hspi) +{ + uint32_t tickstart; + + /* Init tickstart for timeout management*/ + tickstart = HAL_GetTick(); + + /* Disable TXE and ERR interrupt */ + __HAL_SPI_DISABLE_IT(hspi, (SPI_IT_TXE | SPI_IT_ERR)); + + /* Check the end of the transaction */ + if (SPI_EndRxTxTransaction(hspi, SPI_DEFAULT_TIMEOUT, tickstart) != HAL_OK) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_FLAG); + } + + /* Clear overrun flag in 2 Lines communication mode because received is not read */ + if (hspi->Init.Direction == SPI_DIRECTION_2LINES) + { + __HAL_SPI_CLEAR_OVRFLAG(hspi); + } + + hspi->State = HAL_SPI_STATE_READY; + if (hspi->ErrorCode != HAL_SPI_ERROR_NONE) + { + /* Call user error callback */ +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) + hspi->ErrorCallback(hspi); +#else + HAL_SPI_ErrorCallback(hspi); +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ + } + else + { + /* Call user Rx complete callback */ +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) + hspi->TxCpltCallback(hspi); +#else + HAL_SPI_TxCpltCallback(hspi); +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ + } +} + +/** + * @brief Handle abort a Rx transaction. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval None + */ +static void SPI_AbortRx_ISR(SPI_HandleTypeDef *hspi) +{ + __IO uint32_t count; + + /* Disable SPI Peripheral */ + __HAL_SPI_DISABLE(hspi); + + count = SPI_DEFAULT_TIMEOUT * (SystemCoreClock / 24U / 1000U); + + /* Disable RXNEIE interrupt */ + CLEAR_BIT(hspi->Instance->CR2, (SPI_CR2_RXNEIE)); + + /* Check RXNEIE is disabled */ + do + { + if (count == 0U) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_ABORT); + break; + } + count--; + } while (HAL_IS_BIT_SET(hspi->Instance->CR2, SPI_CR2_RXNEIE)); + + /* Control the BSY flag */ + if (SPI_WaitFlagStateUntilTimeout(hspi, SPI_FLAG_BSY, RESET, SPI_DEFAULT_TIMEOUT, HAL_GetTick()) != HAL_OK) + { + hspi->ErrorCode = HAL_SPI_ERROR_ABORT; + } + + /* Empty the FRLVL fifo */ + if (SPI_WaitFifoStateUntilTimeout(hspi, SPI_FLAG_FRLVL, SPI_FRLVL_EMPTY, SPI_DEFAULT_TIMEOUT, + HAL_GetTick()) != HAL_OK) + { + hspi->ErrorCode = HAL_SPI_ERROR_ABORT; + } + + hspi->State = HAL_SPI_STATE_ABORT; +} + +/** + * @brief Handle abort a Tx or Rx/Tx transaction. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval None + */ +static void SPI_AbortTx_ISR(SPI_HandleTypeDef *hspi) +{ + __IO uint32_t count; + + count = SPI_DEFAULT_TIMEOUT * (SystemCoreClock / 24U / 1000U); + + /* Disable TXEIE interrupt */ + CLEAR_BIT(hspi->Instance->CR2, (SPI_CR2_TXEIE)); + + /* Check TXEIE is disabled */ + do + { + if (count == 0U) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_ABORT); + break; + } + count--; + } while (HAL_IS_BIT_SET(hspi->Instance->CR2, SPI_CR2_TXEIE)); + + if (SPI_EndRxTxTransaction(hspi, SPI_DEFAULT_TIMEOUT, HAL_GetTick()) != HAL_OK) + { + hspi->ErrorCode = HAL_SPI_ERROR_ABORT; + } + + /* Disable SPI Peripheral */ + __HAL_SPI_DISABLE(hspi); + + /* Empty the FRLVL fifo */ + if (SPI_WaitFifoStateUntilTimeout(hspi, SPI_FLAG_FRLVL, SPI_FRLVL_EMPTY, SPI_DEFAULT_TIMEOUT, + HAL_GetTick()) != HAL_OK) + { + hspi->ErrorCode = HAL_SPI_ERROR_ABORT; + } + + /* Check case of Full-Duplex Mode and disable directly RXNEIE interrupt */ + if (HAL_IS_BIT_SET(hspi->Instance->CR2, SPI_CR2_RXNEIE)) + { + /* Disable RXNEIE interrupt */ + CLEAR_BIT(hspi->Instance->CR2, (SPI_CR2_RXNEIE)); + + /* Check RXNEIE is disabled */ + do + { + if (count == 0U) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_ABORT); + break; + } + count--; + } while (HAL_IS_BIT_SET(hspi->Instance->CR2, SPI_CR2_RXNEIE)); + + /* Control the BSY flag */ + if (SPI_WaitFlagStateUntilTimeout(hspi, SPI_FLAG_BSY, RESET, SPI_DEFAULT_TIMEOUT, HAL_GetTick()) != HAL_OK) + { + hspi->ErrorCode = HAL_SPI_ERROR_ABORT; + } + + /* Empty the FRLVL fifo */ + if (SPI_WaitFifoStateUntilTimeout(hspi, SPI_FLAG_FRLVL, SPI_FRLVL_EMPTY, SPI_DEFAULT_TIMEOUT, + HAL_GetTick()) != HAL_OK) + { + hspi->ErrorCode = HAL_SPI_ERROR_ABORT; + } + } + hspi->State = HAL_SPI_STATE_ABORT; +} + +/** + * @} + */ + +#endif /* HAL_SPI_MODULE_ENABLED */ + +/** + * @} + */ + +/** + * @} + */ + diff --git a/CablePositioning_IAP_V1.0/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_spi_ex.c b/CablePositioning_IAP_V1.0/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_spi_ex.c index 9ac0e24..241ff98 100644 --- a/CablePositioning_IAP_V1.0/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_spi_ex.c +++ b/CablePositioning_IAP_V1.0/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_spi_ex.c @@ -1,112 +1,112 @@ -/** - ****************************************************************************** - * @file stm32l4xx_hal_spi_ex.c - * @author MCD Application Team - * @brief Extended SPI HAL module driver. - * This file provides firmware functions to manage the following - * SPI peripheral extended functionalities : - * + IO operation functions - * - ****************************************************************************** - * @attention - * - * Copyright (c) 2017 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32l4xx_hal.h" - -/** @addtogroup STM32L4xx_HAL_Driver - * @{ - */ - -/** @defgroup SPIEx SPIEx - * @brief SPI Extended HAL module driver - * @{ - */ -#ifdef HAL_SPI_MODULE_ENABLED - -/* Private typedef -----------------------------------------------------------*/ -/* Private defines -----------------------------------------------------------*/ -/** @defgroup SPIEx_Private_Constants SPIEx Private Constants - * @{ - */ -#define SPI_FIFO_SIZE 4UL -/** - * @} - */ - -/* Private macros ------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ -/* Exported functions --------------------------------------------------------*/ - -/** @defgroup SPIEx_Exported_Functions SPIEx Exported Functions - * @{ - */ - -/** @defgroup SPIEx_Exported_Functions_Group1 IO operation functions - * @brief Data transfers functions - * -@verbatim - ============================================================================== - ##### IO operation functions ##### - =============================================================================== - [..] - This subsection provides a set of extended functions to manage the SPI - data transfers. - - (#) Rx data flush function: - (++) HAL_SPIEx_FlushRxFifo() - -@endverbatim - * @{ - */ - -/** - * @brief Flush the RX fifo. - * @param hspi pointer to a SPI_HandleTypeDef structure that contains - * the configuration information for the specified SPI module. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_SPIEx_FlushRxFifo(SPI_HandleTypeDef *hspi) -{ - __IO uint32_t tmpreg; - uint8_t count = 0U; - while ((hspi->Instance->SR & SPI_FLAG_FRLVL) != SPI_FRLVL_EMPTY) - { - count++; - tmpreg = hspi->Instance->DR; - UNUSED(tmpreg); /* To avoid GCC warning */ - if (count == SPI_FIFO_SIZE) - { - return HAL_TIMEOUT; - } - } - return HAL_OK; -} - -/** - * @} - */ - -/** - * @} - */ - -#endif /* HAL_SPI_MODULE_ENABLED */ - -/** - * @} - */ - -/** - * @} - */ +/** + ****************************************************************************** + * @file stm32l4xx_hal_spi_ex.c + * @author MCD Application Team + * @brief Extended SPI HAL module driver. + * This file provides firmware functions to manage the following + * SPI peripheral extended functionalities : + * + IO operation functions + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l4xx_hal.h" + +/** @addtogroup STM32L4xx_HAL_Driver + * @{ + */ + +/** @defgroup SPIEx SPIEx + * @brief SPI Extended HAL module driver + * @{ + */ +#ifdef HAL_SPI_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private defines -----------------------------------------------------------*/ +/** @defgroup SPIEx_Private_Constants SPIEx Private Constants + * @{ + */ +#define SPI_FIFO_SIZE 4UL +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup SPIEx_Exported_Functions SPIEx Exported Functions + * @{ + */ + +/** @defgroup SPIEx_Exported_Functions_Group1 IO operation functions + * @brief Data transfers functions + * +@verbatim + ============================================================================== + ##### IO operation functions ##### + =============================================================================== + [..] + This subsection provides a set of extended functions to manage the SPI + data transfers. + + (#) Rx data flush function: + (++) HAL_SPIEx_FlushRxFifo() + +@endverbatim + * @{ + */ + +/** + * @brief Flush the RX fifo. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for the specified SPI module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SPIEx_FlushRxFifo(const SPI_HandleTypeDef *hspi) +{ + __IO uint32_t tmpreg; + uint8_t count = 0U; + while ((hspi->Instance->SR & SPI_FLAG_FRLVL) != SPI_FRLVL_EMPTY) + { + count++; + tmpreg = hspi->Instance->DR; + UNUSED(tmpreg); /* To avoid GCC warning */ + if (count == SPI_FIFO_SIZE) + { + return HAL_TIMEOUT; + } + } + return HAL_OK; +} + +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_SPI_MODULE_ENABLED */ + +/** + * @} + */ + +/** + * @} + */ diff --git a/CablePositioning_IAP_V1.0/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_tim.c b/CablePositioning_IAP_V1.0/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_tim.c index 0ce9b02..2ce0df7 100644 --- a/CablePositioning_IAP_V1.0/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_tim.c +++ b/CablePositioning_IAP_V1.0/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_tim.c @@ -1,7896 +1,7902 @@ -/** - ****************************************************************************** - * @file stm32l4xx_hal_tim.c - * @author MCD Application Team - * @brief TIM HAL module driver. - * This file provides firmware functions to manage the following - * functionalities of the Timer (TIM) peripheral: - * + TIM Time Base Initialization - * + TIM Time Base Start - * + TIM Time Base Start Interruption - * + TIM Time Base Start DMA - * + TIM Output Compare/PWM Initialization - * + TIM Output Compare/PWM Channel Configuration - * + TIM Output Compare/PWM Start - * + TIM Output Compare/PWM Start Interruption - * + TIM Output Compare/PWM Start DMA - * + TIM Input Capture Initialization - * + TIM Input Capture Channel Configuration - * + TIM Input Capture Start - * + TIM Input Capture Start Interruption - * + TIM Input Capture Start DMA - * + TIM One Pulse Initialization - * + TIM One Pulse Channel Configuration - * + TIM One Pulse Start - * + TIM Encoder Interface Initialization - * + TIM Encoder Interface Start - * + TIM Encoder Interface Start Interruption - * + TIM Encoder Interface Start DMA - * + Commutation Event configuration with Interruption and DMA - * + TIM OCRef clear configuration - * + TIM External Clock configuration - ****************************************************************************** - * @attention - * - * Copyright (c) 2017 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - @verbatim - ============================================================================== - ##### TIMER Generic features ##### - ============================================================================== - [..] The Timer features include: - (#) 16-bit up, down, up/down auto-reload counter. - (#) 16-bit programmable prescaler allowing dividing (also on the fly) the - counter clock frequency either by any factor between 1 and 65536. - (#) Up to 4 independent channels for: - (++) Input Capture - (++) Output Compare - (++) PWM generation (Edge and Center-aligned Mode) - (++) One-pulse mode output - (#) Synchronization circuit to control the timer with external signals and to interconnect - several timers together. - (#) Supports incremental encoder for positioning purposes - - ##### How to use this driver ##### - ============================================================================== - [..] - (#) Initialize the TIM low level resources by implementing the following functions - depending on the selected feature: - (++) Time Base : HAL_TIM_Base_MspInit() - (++) Input Capture : HAL_TIM_IC_MspInit() - (++) Output Compare : HAL_TIM_OC_MspInit() - (++) PWM generation : HAL_TIM_PWM_MspInit() - (++) One-pulse mode output : HAL_TIM_OnePulse_MspInit() - (++) Encoder mode output : HAL_TIM_Encoder_MspInit() - - (#) Initialize the TIM low level resources : - (##) Enable the TIM interface clock using __HAL_RCC_TIMx_CLK_ENABLE(); - (##) TIM pins configuration - (+++) Enable the clock for the TIM GPIOs using the following function: - __HAL_RCC_GPIOx_CLK_ENABLE(); - (+++) Configure these TIM pins in Alternate function mode using HAL_GPIO_Init(); - - (#) The external Clock can be configured, if needed (the default clock is the - internal clock from the APBx), using the following function: - HAL_TIM_ConfigClockSource, the clock configuration should be done before - any start function. - - (#) Configure the TIM in the desired functioning mode using one of the - Initialization function of this driver: - (++) HAL_TIM_Base_Init: to use the Timer to generate a simple time base - (++) HAL_TIM_OC_Init and HAL_TIM_OC_ConfigChannel: to use the Timer to generate an - Output Compare signal. - (++) HAL_TIM_PWM_Init and HAL_TIM_PWM_ConfigChannel: to use the Timer to generate a - PWM signal. - (++) HAL_TIM_IC_Init and HAL_TIM_IC_ConfigChannel: to use the Timer to measure an - external signal. - (++) HAL_TIM_OnePulse_Init and HAL_TIM_OnePulse_ConfigChannel: to use the Timer - in One Pulse Mode. - (++) HAL_TIM_Encoder_Init: to use the Timer Encoder Interface. - - (#) Activate the TIM peripheral using one of the start functions depending from the feature used: - (++) Time Base : HAL_TIM_Base_Start(), HAL_TIM_Base_Start_DMA(), HAL_TIM_Base_Start_IT() - (++) Input Capture : HAL_TIM_IC_Start(), HAL_TIM_IC_Start_DMA(), HAL_TIM_IC_Start_IT() - (++) Output Compare : HAL_TIM_OC_Start(), HAL_TIM_OC_Start_DMA(), HAL_TIM_OC_Start_IT() - (++) PWM generation : HAL_TIM_PWM_Start(), HAL_TIM_PWM_Start_DMA(), HAL_TIM_PWM_Start_IT() - (++) One-pulse mode output : HAL_TIM_OnePulse_Start(), HAL_TIM_OnePulse_Start_IT() - (++) Encoder mode output : HAL_TIM_Encoder_Start(), HAL_TIM_Encoder_Start_DMA(), HAL_TIM_Encoder_Start_IT(). - - (#) The DMA Burst is managed with the two following functions: - HAL_TIM_DMABurst_WriteStart() - HAL_TIM_DMABurst_ReadStart() - - *** Callback registration *** - ============================================= - - [..] - The compilation define USE_HAL_TIM_REGISTER_CALLBACKS when set to 1 - allows the user to configure dynamically the driver callbacks. - - [..] - Use Function HAL_TIM_RegisterCallback() to register a callback. - HAL_TIM_RegisterCallback() takes as parameters the HAL peripheral handle, - the Callback ID and a pointer to the user callback function. - - [..] - Use function HAL_TIM_UnRegisterCallback() to reset a callback to the default - weak function. - HAL_TIM_UnRegisterCallback takes as parameters the HAL peripheral handle, - and the Callback ID. - - [..] - These functions allow to register/unregister following callbacks: - (+) Base_MspInitCallback : TIM Base Msp Init Callback. - (+) Base_MspDeInitCallback : TIM Base Msp DeInit Callback. - (+) IC_MspInitCallback : TIM IC Msp Init Callback. - (+) IC_MspDeInitCallback : TIM IC Msp DeInit Callback. - (+) OC_MspInitCallback : TIM OC Msp Init Callback. - (+) OC_MspDeInitCallback : TIM OC Msp DeInit Callback. - (+) PWM_MspInitCallback : TIM PWM Msp Init Callback. - (+) PWM_MspDeInitCallback : TIM PWM Msp DeInit Callback. - (+) OnePulse_MspInitCallback : TIM One Pulse Msp Init Callback. - (+) OnePulse_MspDeInitCallback : TIM One Pulse Msp DeInit Callback. - (+) Encoder_MspInitCallback : TIM Encoder Msp Init Callback. - (+) Encoder_MspDeInitCallback : TIM Encoder Msp DeInit Callback. - (+) HallSensor_MspInitCallback : TIM Hall Sensor Msp Init Callback. - (+) HallSensor_MspDeInitCallback : TIM Hall Sensor Msp DeInit Callback. - (+) PeriodElapsedCallback : TIM Period Elapsed Callback. - (+) PeriodElapsedHalfCpltCallback : TIM Period Elapsed half complete Callback. - (+) TriggerCallback : TIM Trigger Callback. - (+) TriggerHalfCpltCallback : TIM Trigger half complete Callback. - (+) IC_CaptureCallback : TIM Input Capture Callback. - (+) IC_CaptureHalfCpltCallback : TIM Input Capture half complete Callback. - (+) OC_DelayElapsedCallback : TIM Output Compare Delay Elapsed Callback. - (+) PWM_PulseFinishedCallback : TIM PWM Pulse Finished Callback. - (+) PWM_PulseFinishedHalfCpltCallback : TIM PWM Pulse Finished half complete Callback. - (+) ErrorCallback : TIM Error Callback. - (+) CommutationCallback : TIM Commutation Callback. - (+) CommutationHalfCpltCallback : TIM Commutation half complete Callback. - (+) BreakCallback : TIM Break Callback. - (+) Break2Callback : TIM Break2 Callback. - - [..] -By default, after the Init and when the state is HAL_TIM_STATE_RESET -all interrupt callbacks are set to the corresponding weak functions: - examples HAL_TIM_TriggerCallback(), HAL_TIM_ErrorCallback(). - - [..] - Exception done for MspInit and MspDeInit functions that are reset to the legacy weak - functionalities in the Init / DeInit only when these callbacks are null - (not registered beforehand). If not, MspInit or MspDeInit are not null, the Init / DeInit - keep and use the user MspInit / MspDeInit callbacks(registered beforehand) - - [..] - Callbacks can be registered / unregistered in HAL_TIM_STATE_READY state only. - Exception done MspInit / MspDeInit that can be registered / unregistered - in HAL_TIM_STATE_READY or HAL_TIM_STATE_RESET state, - thus registered(user) MspInit / DeInit callbacks can be used during the Init / DeInit. - In that case first register the MspInit/MspDeInit user callbacks - using HAL_TIM_RegisterCallback() before calling DeInit or Init function. - - [..] - When The compilation define USE_HAL_TIM_REGISTER_CALLBACKS is set to 0 or - not defined, the callback registration feature is not available and all callbacks - are set to the corresponding weak functions. - - @endverbatim - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32l4xx_hal.h" - -/** @addtogroup STM32L4xx_HAL_Driver - * @{ - */ - -/** @defgroup TIM TIM - * @brief TIM HAL module driver - * @{ - */ - -#ifdef HAL_TIM_MODULE_ENABLED - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -/* Private macros ------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ -/** @addtogroup TIM_Private_Functions - * @{ - */ -static void TIM_OC1_SetConfig(TIM_TypeDef *TIMx, const TIM_OC_InitTypeDef *OC_Config); -static void TIM_OC3_SetConfig(TIM_TypeDef *TIMx, const TIM_OC_InitTypeDef *OC_Config); -static void TIM_OC4_SetConfig(TIM_TypeDef *TIMx, const TIM_OC_InitTypeDef *OC_Config); -static void TIM_OC5_SetConfig(TIM_TypeDef *TIMx, const TIM_OC_InitTypeDef *OC_Config); -static void TIM_OC6_SetConfig(TIM_TypeDef *TIMx, const TIM_OC_InitTypeDef *OC_Config); -static void TIM_TI1_ConfigInputStage(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICFilter); -static void TIM_TI2_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, - uint32_t TIM_ICFilter); -static void TIM_TI2_ConfigInputStage(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICFilter); -static void TIM_TI3_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, - uint32_t TIM_ICFilter); -static void TIM_TI4_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, - uint32_t TIM_ICFilter); -static void TIM_ITRx_SetConfig(TIM_TypeDef *TIMx, uint32_t InputTriggerSource); -static void TIM_DMAPeriodElapsedCplt(DMA_HandleTypeDef *hdma); -static void TIM_DMAPeriodElapsedHalfCplt(DMA_HandleTypeDef *hdma); -static void TIM_DMADelayPulseCplt(DMA_HandleTypeDef *hdma); -static void TIM_DMATriggerCplt(DMA_HandleTypeDef *hdma); -static void TIM_DMATriggerHalfCplt(DMA_HandleTypeDef *hdma); -static HAL_StatusTypeDef TIM_SlaveTimer_SetConfig(TIM_HandleTypeDef *htim, - const TIM_SlaveConfigTypeDef *sSlaveConfig); -/** - * @} - */ -/* Exported functions --------------------------------------------------------*/ - -/** @defgroup TIM_Exported_Functions TIM Exported Functions - * @{ - */ - -/** @defgroup TIM_Exported_Functions_Group1 TIM Time Base functions - * @brief Time Base functions - * -@verbatim - ============================================================================== - ##### Time Base functions ##### - ============================================================================== - [..] - This section provides functions allowing to: - (+) Initialize and configure the TIM base. - (+) De-initialize the TIM base. - (+) Start the Time Base. - (+) Stop the Time Base. - (+) Start the Time Base and enable interrupt. - (+) Stop the Time Base and disable interrupt. - (+) Start the Time Base and enable DMA transfer. - (+) Stop the Time Base and disable DMA transfer. - -@endverbatim - * @{ - */ -/** - * @brief Initializes the TIM Time base Unit according to the specified - * parameters in the TIM_HandleTypeDef and initialize the associated handle. - * @note Switching from Center Aligned counter mode to Edge counter mode (or reverse) - * requires a timer reset to avoid unexpected direction - * due to DIR bit readonly in center aligned mode. - * Ex: call @ref HAL_TIM_Base_DeInit() before HAL_TIM_Base_Init() - * @param htim TIM Base handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_Base_Init(TIM_HandleTypeDef *htim) -{ - /* Check the TIM handle allocation */ - if (htim == NULL) - { - return HAL_ERROR; - } - - /* Check the parameters */ - assert_param(IS_TIM_INSTANCE(htim->Instance)); - assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode)); - assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision)); - assert_param(IS_TIM_PERIOD(htim, htim->Init.Period)); - assert_param(IS_TIM_AUTORELOAD_PRELOAD(htim->Init.AutoReloadPreload)); - - if (htim->State == HAL_TIM_STATE_RESET) - { - /* Allocate lock resource and initialize it */ - htim->Lock = HAL_UNLOCKED; - -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) - /* Reset interrupt callbacks to legacy weak callbacks */ - TIM_ResetCallback(htim); - - if (htim->Base_MspInitCallback == NULL) - { - htim->Base_MspInitCallback = HAL_TIM_Base_MspInit; - } - /* Init the low level hardware : GPIO, CLOCK, NVIC */ - htim->Base_MspInitCallback(htim); -#else - /* Init the low level hardware : GPIO, CLOCK, NVIC */ - HAL_TIM_Base_MspInit(htim); -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ - } - - /* Set the TIM state */ - htim->State = HAL_TIM_STATE_BUSY; - - /* Set the Time Base configuration */ - TIM_Base_SetConfig(htim->Instance, &htim->Init); - - /* Initialize the DMA burst operation state */ - htim->DMABurstState = HAL_DMA_BURST_STATE_READY; - - /* Initialize the TIM channels state */ - TIM_CHANNEL_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_READY); - TIM_CHANNEL_N_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_READY); - - /* Initialize the TIM state*/ - htim->State = HAL_TIM_STATE_READY; - - return HAL_OK; -} - -/** - * @brief DeInitializes the TIM Base peripheral - * @param htim TIM Base handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_Base_DeInit(TIM_HandleTypeDef *htim) -{ - /* Check the parameters */ - assert_param(IS_TIM_INSTANCE(htim->Instance)); - - htim->State = HAL_TIM_STATE_BUSY; - - /* Disable the TIM Peripheral Clock */ - __HAL_TIM_DISABLE(htim); - -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) - if (htim->Base_MspDeInitCallback == NULL) - { - htim->Base_MspDeInitCallback = HAL_TIM_Base_MspDeInit; - } - /* DeInit the low level hardware */ - htim->Base_MspDeInitCallback(htim); -#else - /* DeInit the low level hardware: GPIO, CLOCK, NVIC */ - HAL_TIM_Base_MspDeInit(htim); -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ - - /* Change the DMA burst operation state */ - htim->DMABurstState = HAL_DMA_BURST_STATE_RESET; - - /* Change the TIM channels state */ - TIM_CHANNEL_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_RESET); - TIM_CHANNEL_N_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_RESET); - - /* Change TIM state */ - htim->State = HAL_TIM_STATE_RESET; - - /* Release Lock */ - __HAL_UNLOCK(htim); - - return HAL_OK; -} - -/** - * @brief Initializes the TIM Base MSP. - * @param htim TIM Base handle - * @retval None - */ -__weak void HAL_TIM_Base_MspInit(TIM_HandleTypeDef *htim) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(htim); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_TIM_Base_MspInit could be implemented in the user file - */ -} - -/** - * @brief DeInitializes TIM Base MSP. - * @param htim TIM Base handle - * @retval None - */ -__weak void HAL_TIM_Base_MspDeInit(TIM_HandleTypeDef *htim) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(htim); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_TIM_Base_MspDeInit could be implemented in the user file - */ -} - - -/** - * @brief Starts the TIM Base generation. - * @param htim TIM Base handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_Base_Start(TIM_HandleTypeDef *htim) -{ - uint32_t tmpsmcr; - - /* Check the parameters */ - assert_param(IS_TIM_INSTANCE(htim->Instance)); - - /* Check the TIM state */ - if (htim->State != HAL_TIM_STATE_READY) - { - return HAL_ERROR; - } - - /* Set the TIM state */ - htim->State = HAL_TIM_STATE_BUSY; - - /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ - if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) - { - tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; - if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) - { - __HAL_TIM_ENABLE(htim); - } - } - else - { - __HAL_TIM_ENABLE(htim); - } - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Stops the TIM Base generation. - * @param htim TIM Base handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_Base_Stop(TIM_HandleTypeDef *htim) -{ - /* Check the parameters */ - assert_param(IS_TIM_INSTANCE(htim->Instance)); - - /* Disable the Peripheral */ - __HAL_TIM_DISABLE(htim); - - /* Set the TIM state */ - htim->State = HAL_TIM_STATE_READY; - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Starts the TIM Base generation in interrupt mode. - * @param htim TIM Base handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_Base_Start_IT(TIM_HandleTypeDef *htim) -{ - uint32_t tmpsmcr; - - /* Check the parameters */ - assert_param(IS_TIM_INSTANCE(htim->Instance)); - - /* Check the TIM state */ - if (htim->State != HAL_TIM_STATE_READY) - { - return HAL_ERROR; - } - - /* Set the TIM state */ - htim->State = HAL_TIM_STATE_BUSY; - - /* Enable the TIM Update interrupt */ - __HAL_TIM_ENABLE_IT(htim, TIM_IT_UPDATE); - - /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ - if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) - { - tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; - if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) - { - __HAL_TIM_ENABLE(htim); - } - } - else - { - __HAL_TIM_ENABLE(htim); - } - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Stops the TIM Base generation in interrupt mode. - * @param htim TIM Base handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_Base_Stop_IT(TIM_HandleTypeDef *htim) -{ - /* Check the parameters */ - assert_param(IS_TIM_INSTANCE(htim->Instance)); - - /* Disable the TIM Update interrupt */ - __HAL_TIM_DISABLE_IT(htim, TIM_IT_UPDATE); - - /* Disable the Peripheral */ - __HAL_TIM_DISABLE(htim); - - /* Set the TIM state */ - htim->State = HAL_TIM_STATE_READY; - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Starts the TIM Base generation in DMA mode. - * @param htim TIM Base handle - * @param pData The source Buffer address. - * @param Length The length of data to be transferred from memory to peripheral. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_Base_Start_DMA(TIM_HandleTypeDef *htim, const uint32_t *pData, uint16_t Length) -{ - uint32_t tmpsmcr; - - /* Check the parameters */ - assert_param(IS_TIM_DMA_INSTANCE(htim->Instance)); - - /* Set the TIM state */ - if (htim->State == HAL_TIM_STATE_BUSY) - { - return HAL_BUSY; - } - else if (htim->State == HAL_TIM_STATE_READY) - { - if ((pData == NULL) || (Length == 0U)) - { - return HAL_ERROR; - } - else - { - htim->State = HAL_TIM_STATE_BUSY; - } - } - else - { - return HAL_ERROR; - } - - /* Set the DMA Period elapsed callbacks */ - htim->hdma[TIM_DMA_ID_UPDATE]->XferCpltCallback = TIM_DMAPeriodElapsedCplt; - htim->hdma[TIM_DMA_ID_UPDATE]->XferHalfCpltCallback = TIM_DMAPeriodElapsedHalfCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_UPDATE]->XferErrorCallback = TIM_DMAError ; - - /* Enable the DMA channel */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_UPDATE], (uint32_t)pData, (uint32_t)&htim->Instance->ARR, - Length) != HAL_OK) - { - /* Return error status */ - return HAL_ERROR; - } - - /* Enable the TIM Update DMA request */ - __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_UPDATE); - - /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ - if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) - { - tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; - if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) - { - __HAL_TIM_ENABLE(htim); - } - } - else - { - __HAL_TIM_ENABLE(htim); - } - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Stops the TIM Base generation in DMA mode. - * @param htim TIM Base handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_Base_Stop_DMA(TIM_HandleTypeDef *htim) -{ - /* Check the parameters */ - assert_param(IS_TIM_DMA_INSTANCE(htim->Instance)); - - /* Disable the TIM Update DMA request */ - __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_UPDATE); - - (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_UPDATE]); - - /* Disable the Peripheral */ - __HAL_TIM_DISABLE(htim); - - /* Set the TIM state */ - htim->State = HAL_TIM_STATE_READY; - - /* Return function status */ - return HAL_OK; -} - -/** - * @} - */ - -/** @defgroup TIM_Exported_Functions_Group2 TIM Output Compare functions - * @brief TIM Output Compare functions - * -@verbatim - ============================================================================== - ##### TIM Output Compare functions ##### - ============================================================================== - [..] - This section provides functions allowing to: - (+) Initialize and configure the TIM Output Compare. - (+) De-initialize the TIM Output Compare. - (+) Start the TIM Output Compare. - (+) Stop the TIM Output Compare. - (+) Start the TIM Output Compare and enable interrupt. - (+) Stop the TIM Output Compare and disable interrupt. - (+) Start the TIM Output Compare and enable DMA transfer. - (+) Stop the TIM Output Compare and disable DMA transfer. - -@endverbatim - * @{ - */ -/** - * @brief Initializes the TIM Output Compare according to the specified - * parameters in the TIM_HandleTypeDef and initializes the associated handle. - * @note Switching from Center Aligned counter mode to Edge counter mode (or reverse) - * requires a timer reset to avoid unexpected direction - * due to DIR bit readonly in center aligned mode. - * Ex: call @ref HAL_TIM_OC_DeInit() before HAL_TIM_OC_Init() - * @param htim TIM Output Compare handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_OC_Init(TIM_HandleTypeDef *htim) -{ - /* Check the TIM handle allocation */ - if (htim == NULL) - { - return HAL_ERROR; - } - - /* Check the parameters */ - assert_param(IS_TIM_INSTANCE(htim->Instance)); - assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode)); - assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision)); - assert_param(IS_TIM_PERIOD(htim, htim->Init.Period)); - assert_param(IS_TIM_AUTORELOAD_PRELOAD(htim->Init.AutoReloadPreload)); - - if (htim->State == HAL_TIM_STATE_RESET) - { - /* Allocate lock resource and initialize it */ - htim->Lock = HAL_UNLOCKED; - -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) - /* Reset interrupt callbacks to legacy weak callbacks */ - TIM_ResetCallback(htim); - - if (htim->OC_MspInitCallback == NULL) - { - htim->OC_MspInitCallback = HAL_TIM_OC_MspInit; - } - /* Init the low level hardware : GPIO, CLOCK, NVIC */ - htim->OC_MspInitCallback(htim); -#else - /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */ - HAL_TIM_OC_MspInit(htim); -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ - } - - /* Set the TIM state */ - htim->State = HAL_TIM_STATE_BUSY; - - /* Init the base time for the Output Compare */ - TIM_Base_SetConfig(htim->Instance, &htim->Init); - - /* Initialize the DMA burst operation state */ - htim->DMABurstState = HAL_DMA_BURST_STATE_READY; - - /* Initialize the TIM channels state */ - TIM_CHANNEL_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_READY); - TIM_CHANNEL_N_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_READY); - - /* Initialize the TIM state*/ - htim->State = HAL_TIM_STATE_READY; - - return HAL_OK; -} - -/** - * @brief DeInitializes the TIM peripheral - * @param htim TIM Output Compare handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_OC_DeInit(TIM_HandleTypeDef *htim) -{ - /* Check the parameters */ - assert_param(IS_TIM_INSTANCE(htim->Instance)); - - htim->State = HAL_TIM_STATE_BUSY; - - /* Disable the TIM Peripheral Clock */ - __HAL_TIM_DISABLE(htim); - -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) - if (htim->OC_MspDeInitCallback == NULL) - { - htim->OC_MspDeInitCallback = HAL_TIM_OC_MspDeInit; - } - /* DeInit the low level hardware */ - htim->OC_MspDeInitCallback(htim); -#else - /* DeInit the low level hardware: GPIO, CLOCK, NVIC and DMA */ - HAL_TIM_OC_MspDeInit(htim); -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ - - /* Change the DMA burst operation state */ - htim->DMABurstState = HAL_DMA_BURST_STATE_RESET; - - /* Change the TIM channels state */ - TIM_CHANNEL_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_RESET); - TIM_CHANNEL_N_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_RESET); - - /* Change TIM state */ - htim->State = HAL_TIM_STATE_RESET; - - /* Release Lock */ - __HAL_UNLOCK(htim); - - return HAL_OK; -} - -/** - * @brief Initializes the TIM Output Compare MSP. - * @param htim TIM Output Compare handle - * @retval None - */ -__weak void HAL_TIM_OC_MspInit(TIM_HandleTypeDef *htim) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(htim); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_TIM_OC_MspInit could be implemented in the user file - */ -} - -/** - * @brief DeInitializes TIM Output Compare MSP. - * @param htim TIM Output Compare handle - * @retval None - */ -__weak void HAL_TIM_OC_MspDeInit(TIM_HandleTypeDef *htim) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(htim); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_TIM_OC_MspDeInit could be implemented in the user file - */ -} - -/** - * @brief Starts the TIM Output Compare signal generation. - * @param htim TIM Output Compare handle - * @param Channel TIM Channel to be enabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @arg TIM_CHANNEL_4: TIM Channel 4 selected - * @arg TIM_CHANNEL_5: TIM Channel 5 selected - * @arg TIM_CHANNEL_6: TIM Channel 6 selected - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_OC_Start(TIM_HandleTypeDef *htim, uint32_t Channel) -{ - uint32_t tmpsmcr; - - /* Check the parameters */ - assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); - - /* Check the TIM channel state */ - if (TIM_CHANNEL_STATE_GET(htim, Channel) != HAL_TIM_CHANNEL_STATE_READY) - { - return HAL_ERROR; - } - - /* Set the TIM channel state */ - TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); - - /* Enable the Output compare channel */ - TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); - - if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) - { - /* Enable the main output */ - __HAL_TIM_MOE_ENABLE(htim); - } - - /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ - if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) - { - tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; - if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) - { - __HAL_TIM_ENABLE(htim); - } - } - else - { - __HAL_TIM_ENABLE(htim); - } - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Stops the TIM Output Compare signal generation. - * @param htim TIM Output Compare handle - * @param Channel TIM Channel to be disabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @arg TIM_CHANNEL_4: TIM Channel 4 selected - * @arg TIM_CHANNEL_5: TIM Channel 5 selected - * @arg TIM_CHANNEL_6: TIM Channel 6 selected - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_OC_Stop(TIM_HandleTypeDef *htim, uint32_t Channel) -{ - /* Check the parameters */ - assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); - - /* Disable the Output compare channel */ - TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); - - if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) - { - /* Disable the Main Output */ - __HAL_TIM_MOE_DISABLE(htim); - } - - /* Disable the Peripheral */ - __HAL_TIM_DISABLE(htim); - - /* Set the TIM channel state */ - TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Starts the TIM Output Compare signal generation in interrupt mode. - * @param htim TIM Output Compare handle - * @param Channel TIM Channel to be enabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @arg TIM_CHANNEL_4: TIM Channel 4 selected - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_OC_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel) -{ - HAL_StatusTypeDef status = HAL_OK; - uint32_t tmpsmcr; - - /* Check the parameters */ - assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); - - /* Check the TIM channel state */ - if (TIM_CHANNEL_STATE_GET(htim, Channel) != HAL_TIM_CHANNEL_STATE_READY) - { - return HAL_ERROR; - } - - /* Set the TIM channel state */ - TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); - - switch (Channel) - { - case TIM_CHANNEL_1: - { - /* Enable the TIM Capture/Compare 1 interrupt */ - __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); - break; - } - - case TIM_CHANNEL_2: - { - /* Enable the TIM Capture/Compare 2 interrupt */ - __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2); - break; - } - - case TIM_CHANNEL_3: - { - /* Enable the TIM Capture/Compare 3 interrupt */ - __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC3); - break; - } - - case TIM_CHANNEL_4: - { - /* Enable the TIM Capture/Compare 4 interrupt */ - __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC4); - break; - } - - default: - status = HAL_ERROR; - break; - } - - if (status == HAL_OK) - { - /* Enable the Output compare channel */ - TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); - - if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) - { - /* Enable the main output */ - __HAL_TIM_MOE_ENABLE(htim); - } - - /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ - if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) - { - tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; - if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) - { - __HAL_TIM_ENABLE(htim); - } - } - else - { - __HAL_TIM_ENABLE(htim); - } - } - - /* Return function status */ - return status; -} - -/** - * @brief Stops the TIM Output Compare signal generation in interrupt mode. - * @param htim TIM Output Compare handle - * @param Channel TIM Channel to be disabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @arg TIM_CHANNEL_4: TIM Channel 4 selected - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_OC_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Check the parameters */ - assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); - - switch (Channel) - { - case TIM_CHANNEL_1: - { - /* Disable the TIM Capture/Compare 1 interrupt */ - __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1); - break; - } - - case TIM_CHANNEL_2: - { - /* Disable the TIM Capture/Compare 2 interrupt */ - __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2); - break; - } - - case TIM_CHANNEL_3: - { - /* Disable the TIM Capture/Compare 3 interrupt */ - __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC3); - break; - } - - case TIM_CHANNEL_4: - { - /* Disable the TIM Capture/Compare 4 interrupt */ - __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC4); - break; - } - - default: - status = HAL_ERROR; - break; - } - - if (status == HAL_OK) - { - /* Disable the Output compare channel */ - TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); - - if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) - { - /* Disable the Main Output */ - __HAL_TIM_MOE_DISABLE(htim); - } - - /* Disable the Peripheral */ - __HAL_TIM_DISABLE(htim); - - /* Set the TIM channel state */ - TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); - } - - /* Return function status */ - return status; -} - -/** - * @brief Starts the TIM Output Compare signal generation in DMA mode. - * @param htim TIM Output Compare handle - * @param Channel TIM Channel to be enabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @arg TIM_CHANNEL_4: TIM Channel 4 selected - * @param pData The source Buffer address. - * @param Length The length of data to be transferred from memory to TIM peripheral - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_OC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, const uint32_t *pData, - uint16_t Length) -{ - HAL_StatusTypeDef status = HAL_OK; - uint32_t tmpsmcr; - - /* Check the parameters */ - assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); - - /* Set the TIM channel state */ - if (TIM_CHANNEL_STATE_GET(htim, Channel) == HAL_TIM_CHANNEL_STATE_BUSY) - { - return HAL_BUSY; - } - else if (TIM_CHANNEL_STATE_GET(htim, Channel) == HAL_TIM_CHANNEL_STATE_READY) - { - if ((pData == NULL) || (Length == 0U)) - { - return HAL_ERROR; - } - else - { - TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); - } - } - else - { - return HAL_ERROR; - } - - switch (Channel) - { - case TIM_CHANNEL_1: - { - /* Set the DMA compare callbacks */ - htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMADelayPulseCplt; - htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ; - - /* Enable the DMA channel */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)pData, (uint32_t)&htim->Instance->CCR1, - Length) != HAL_OK) - { - /* Return error status */ - return HAL_ERROR; - } - - /* Enable the TIM Capture/Compare 1 DMA request */ - __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1); - break; - } - - case TIM_CHANNEL_2: - { - /* Set the DMA compare callbacks */ - htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMADelayPulseCplt; - htim->hdma[TIM_DMA_ID_CC2]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ; - - /* Enable the DMA channel */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)pData, (uint32_t)&htim->Instance->CCR2, - Length) != HAL_OK) - { - /* Return error status */ - return HAL_ERROR; - } - - /* Enable the TIM Capture/Compare 2 DMA request */ - __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2); - break; - } - - case TIM_CHANNEL_3: - { - /* Set the DMA compare callbacks */ - htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMADelayPulseCplt; - htim->hdma[TIM_DMA_ID_CC3]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ; - - /* Enable the DMA channel */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)pData, (uint32_t)&htim->Instance->CCR3, - Length) != HAL_OK) - { - /* Return error status */ - return HAL_ERROR; - } - /* Enable the TIM Capture/Compare 3 DMA request */ - __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC3); - break; - } - - case TIM_CHANNEL_4: - { - /* Set the DMA compare callbacks */ - htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = TIM_DMADelayPulseCplt; - htim->hdma[TIM_DMA_ID_CC4]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ; - - /* Enable the DMA channel */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)pData, (uint32_t)&htim->Instance->CCR4, - Length) != HAL_OK) - { - /* Return error status */ - return HAL_ERROR; - } - /* Enable the TIM Capture/Compare 4 DMA request */ - __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC4); - break; - } - - default: - status = HAL_ERROR; - break; - } - - if (status == HAL_OK) - { - /* Enable the Output compare channel */ - TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); - - if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) - { - /* Enable the main output */ - __HAL_TIM_MOE_ENABLE(htim); - } - - /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ - if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) - { - tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; - if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) - { - __HAL_TIM_ENABLE(htim); - } - } - else - { - __HAL_TIM_ENABLE(htim); - } - } - - /* Return function status */ - return status; -} - -/** - * @brief Stops the TIM Output Compare signal generation in DMA mode. - * @param htim TIM Output Compare handle - * @param Channel TIM Channel to be disabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @arg TIM_CHANNEL_4: TIM Channel 4 selected - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_OC_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Check the parameters */ - assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); - - switch (Channel) - { - case TIM_CHANNEL_1: - { - /* Disable the TIM Capture/Compare 1 DMA request */ - __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1); - (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]); - break; - } - - case TIM_CHANNEL_2: - { - /* Disable the TIM Capture/Compare 2 DMA request */ - __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2); - (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC2]); - break; - } - - case TIM_CHANNEL_3: - { - /* Disable the TIM Capture/Compare 3 DMA request */ - __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC3); - (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC3]); - break; - } - - case TIM_CHANNEL_4: - { - /* Disable the TIM Capture/Compare 4 interrupt */ - __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC4); - (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC4]); - break; - } - - default: - status = HAL_ERROR; - break; - } - - if (status == HAL_OK) - { - /* Disable the Output compare channel */ - TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); - - if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) - { - /* Disable the Main Output */ - __HAL_TIM_MOE_DISABLE(htim); - } - - /* Disable the Peripheral */ - __HAL_TIM_DISABLE(htim); - - /* Set the TIM channel state */ - TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); - } - - /* Return function status */ - return status; -} - -/** - * @} - */ - -/** @defgroup TIM_Exported_Functions_Group3 TIM PWM functions - * @brief TIM PWM functions - * -@verbatim - ============================================================================== - ##### TIM PWM functions ##### - ============================================================================== - [..] - This section provides functions allowing to: - (+) Initialize and configure the TIM PWM. - (+) De-initialize the TIM PWM. - (+) Start the TIM PWM. - (+) Stop the TIM PWM. - (+) Start the TIM PWM and enable interrupt. - (+) Stop the TIM PWM and disable interrupt. - (+) Start the TIM PWM and enable DMA transfer. - (+) Stop the TIM PWM and disable DMA transfer. - -@endverbatim - * @{ - */ -/** - * @brief Initializes the TIM PWM Time Base according to the specified - * parameters in the TIM_HandleTypeDef and initializes the associated handle. - * @note Switching from Center Aligned counter mode to Edge counter mode (or reverse) - * requires a timer reset to avoid unexpected direction - * due to DIR bit readonly in center aligned mode. - * Ex: call @ref HAL_TIM_PWM_DeInit() before HAL_TIM_PWM_Init() - * @param htim TIM PWM handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_PWM_Init(TIM_HandleTypeDef *htim) -{ - /* Check the TIM handle allocation */ - if (htim == NULL) - { - return HAL_ERROR; - } - - /* Check the parameters */ - assert_param(IS_TIM_INSTANCE(htim->Instance)); - assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode)); - assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision)); - assert_param(IS_TIM_PERIOD(htim, htim->Init.Period)); - assert_param(IS_TIM_AUTORELOAD_PRELOAD(htim->Init.AutoReloadPreload)); - - if (htim->State == HAL_TIM_STATE_RESET) - { - /* Allocate lock resource and initialize it */ - htim->Lock = HAL_UNLOCKED; - -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) - /* Reset interrupt callbacks to legacy weak callbacks */ - TIM_ResetCallback(htim); - - if (htim->PWM_MspInitCallback == NULL) - { - htim->PWM_MspInitCallback = HAL_TIM_PWM_MspInit; - } - /* Init the low level hardware : GPIO, CLOCK, NVIC */ - htim->PWM_MspInitCallback(htim); -#else - /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */ - HAL_TIM_PWM_MspInit(htim); -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ - } - - /* Set the TIM state */ - htim->State = HAL_TIM_STATE_BUSY; - - /* Init the base time for the PWM */ - TIM_Base_SetConfig(htim->Instance, &htim->Init); - - /* Initialize the DMA burst operation state */ - htim->DMABurstState = HAL_DMA_BURST_STATE_READY; - - /* Initialize the TIM channels state */ - TIM_CHANNEL_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_READY); - TIM_CHANNEL_N_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_READY); - - /* Initialize the TIM state*/ - htim->State = HAL_TIM_STATE_READY; - - return HAL_OK; -} - -/** - * @brief DeInitializes the TIM peripheral - * @param htim TIM PWM handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_PWM_DeInit(TIM_HandleTypeDef *htim) -{ - /* Check the parameters */ - assert_param(IS_TIM_INSTANCE(htim->Instance)); - - htim->State = HAL_TIM_STATE_BUSY; - - /* Disable the TIM Peripheral Clock */ - __HAL_TIM_DISABLE(htim); - -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) - if (htim->PWM_MspDeInitCallback == NULL) - { - htim->PWM_MspDeInitCallback = HAL_TIM_PWM_MspDeInit; - } - /* DeInit the low level hardware */ - htim->PWM_MspDeInitCallback(htim); -#else - /* DeInit the low level hardware: GPIO, CLOCK, NVIC and DMA */ - HAL_TIM_PWM_MspDeInit(htim); -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ - - /* Change the DMA burst operation state */ - htim->DMABurstState = HAL_DMA_BURST_STATE_RESET; - - /* Change the TIM channels state */ - TIM_CHANNEL_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_RESET); - TIM_CHANNEL_N_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_RESET); - - /* Change TIM state */ - htim->State = HAL_TIM_STATE_RESET; - - /* Release Lock */ - __HAL_UNLOCK(htim); - - return HAL_OK; -} - -/** - * @brief Initializes the TIM PWM MSP. - * @param htim TIM PWM handle - * @retval None - */ -__weak void HAL_TIM_PWM_MspInit(TIM_HandleTypeDef *htim) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(htim); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_TIM_PWM_MspInit could be implemented in the user file - */ -} - -/** - * @brief DeInitializes TIM PWM MSP. - * @param htim TIM PWM handle - * @retval None - */ -__weak void HAL_TIM_PWM_MspDeInit(TIM_HandleTypeDef *htim) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(htim); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_TIM_PWM_MspDeInit could be implemented in the user file - */ -} - -/** - * @brief Starts the PWM signal generation. - * @param htim TIM handle - * @param Channel TIM Channels to be enabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @arg TIM_CHANNEL_4: TIM Channel 4 selected - * @arg TIM_CHANNEL_5: TIM Channel 5 selected - * @arg TIM_CHANNEL_6: TIM Channel 6 selected - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_PWM_Start(TIM_HandleTypeDef *htim, uint32_t Channel) -{ - uint32_t tmpsmcr; - - /* Check the parameters */ - assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); - - /* Check the TIM channel state */ - if (TIM_CHANNEL_STATE_GET(htim, Channel) != HAL_TIM_CHANNEL_STATE_READY) - { - return HAL_ERROR; - } - - /* Set the TIM channel state */ - TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); - - /* Enable the Capture compare channel */ - TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); - - if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) - { - /* Enable the main output */ - __HAL_TIM_MOE_ENABLE(htim); - } - - /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ - if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) - { - tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; - if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) - { - __HAL_TIM_ENABLE(htim); - } - } - else - { - __HAL_TIM_ENABLE(htim); - } - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Stops the PWM signal generation. - * @param htim TIM PWM handle - * @param Channel TIM Channels to be disabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @arg TIM_CHANNEL_4: TIM Channel 4 selected - * @arg TIM_CHANNEL_5: TIM Channel 5 selected - * @arg TIM_CHANNEL_6: TIM Channel 6 selected - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_PWM_Stop(TIM_HandleTypeDef *htim, uint32_t Channel) -{ - /* Check the parameters */ - assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); - - /* Disable the Capture compare channel */ - TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); - - if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) - { - /* Disable the Main Output */ - __HAL_TIM_MOE_DISABLE(htim); - } - - /* Disable the Peripheral */ - __HAL_TIM_DISABLE(htim); - - /* Set the TIM channel state */ - TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Starts the PWM signal generation in interrupt mode. - * @param htim TIM PWM handle - * @param Channel TIM Channel to be enabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @arg TIM_CHANNEL_4: TIM Channel 4 selected - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_PWM_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel) -{ - HAL_StatusTypeDef status = HAL_OK; - uint32_t tmpsmcr; - - /* Check the parameters */ - assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); - - /* Check the TIM channel state */ - if (TIM_CHANNEL_STATE_GET(htim, Channel) != HAL_TIM_CHANNEL_STATE_READY) - { - return HAL_ERROR; - } - - /* Set the TIM channel state */ - TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); - - switch (Channel) - { - case TIM_CHANNEL_1: - { - /* Enable the TIM Capture/Compare 1 interrupt */ - __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); - break; - } - - case TIM_CHANNEL_2: - { - /* Enable the TIM Capture/Compare 2 interrupt */ - __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2); - break; - } - - case TIM_CHANNEL_3: - { - /* Enable the TIM Capture/Compare 3 interrupt */ - __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC3); - break; - } - - case TIM_CHANNEL_4: - { - /* Enable the TIM Capture/Compare 4 interrupt */ - __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC4); - break; - } - - default: - status = HAL_ERROR; - break; - } - - if (status == HAL_OK) - { - /* Enable the Capture compare channel */ - TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); - - if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) - { - /* Enable the main output */ - __HAL_TIM_MOE_ENABLE(htim); - } - - /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ - if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) - { - tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; - if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) - { - __HAL_TIM_ENABLE(htim); - } - } - else - { - __HAL_TIM_ENABLE(htim); - } - } - - /* Return function status */ - return status; -} - -/** - * @brief Stops the PWM signal generation in interrupt mode. - * @param htim TIM PWM handle - * @param Channel TIM Channels to be disabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @arg TIM_CHANNEL_4: TIM Channel 4 selected - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_PWM_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Check the parameters */ - assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); - - switch (Channel) - { - case TIM_CHANNEL_1: - { - /* Disable the TIM Capture/Compare 1 interrupt */ - __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1); - break; - } - - case TIM_CHANNEL_2: - { - /* Disable the TIM Capture/Compare 2 interrupt */ - __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2); - break; - } - - case TIM_CHANNEL_3: - { - /* Disable the TIM Capture/Compare 3 interrupt */ - __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC3); - break; - } - - case TIM_CHANNEL_4: - { - /* Disable the TIM Capture/Compare 4 interrupt */ - __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC4); - break; - } - - default: - status = HAL_ERROR; - break; - } - - if (status == HAL_OK) - { - /* Disable the Capture compare channel */ - TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); - - if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) - { - /* Disable the Main Output */ - __HAL_TIM_MOE_DISABLE(htim); - } - - /* Disable the Peripheral */ - __HAL_TIM_DISABLE(htim); - - /* Set the TIM channel state */ - TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); - } - - /* Return function status */ - return status; -} - -/** - * @brief Starts the TIM PWM signal generation in DMA mode. - * @param htim TIM PWM handle - * @param Channel TIM Channels to be enabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @arg TIM_CHANNEL_4: TIM Channel 4 selected - * @param pData The source Buffer address. - * @param Length The length of data to be transferred from memory to TIM peripheral - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_PWM_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, const uint32_t *pData, - uint16_t Length) -{ - HAL_StatusTypeDef status = HAL_OK; - uint32_t tmpsmcr; - - /* Check the parameters */ - assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); - - /* Set the TIM channel state */ - if (TIM_CHANNEL_STATE_GET(htim, Channel) == HAL_TIM_CHANNEL_STATE_BUSY) - { - return HAL_BUSY; - } - else if (TIM_CHANNEL_STATE_GET(htim, Channel) == HAL_TIM_CHANNEL_STATE_READY) - { - if ((pData == NULL) || (Length == 0U)) - { - return HAL_ERROR; - } - else - { - TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); - } - } - else - { - return HAL_ERROR; - } - - switch (Channel) - { - case TIM_CHANNEL_1: - { - /* Set the DMA compare callbacks */ - htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMADelayPulseCplt; - htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ; - - /* Enable the DMA channel */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)pData, (uint32_t)&htim->Instance->CCR1, - Length) != HAL_OK) - { - /* Return error status */ - return HAL_ERROR; - } - - /* Enable the TIM Capture/Compare 1 DMA request */ - __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1); - break; - } - - case TIM_CHANNEL_2: - { - /* Set the DMA compare callbacks */ - htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMADelayPulseCplt; - htim->hdma[TIM_DMA_ID_CC2]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ; - - /* Enable the DMA channel */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)pData, (uint32_t)&htim->Instance->CCR2, - Length) != HAL_OK) - { - /* Return error status */ - return HAL_ERROR; - } - /* Enable the TIM Capture/Compare 2 DMA request */ - __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2); - break; - } - - case TIM_CHANNEL_3: - { - /* Set the DMA compare callbacks */ - htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMADelayPulseCplt; - htim->hdma[TIM_DMA_ID_CC3]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ; - - /* Enable the DMA channel */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)pData, (uint32_t)&htim->Instance->CCR3, - Length) != HAL_OK) - { - /* Return error status */ - return HAL_ERROR; - } - /* Enable the TIM Output Capture/Compare 3 request */ - __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC3); - break; - } - - case TIM_CHANNEL_4: - { - /* Set the DMA compare callbacks */ - htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = TIM_DMADelayPulseCplt; - htim->hdma[TIM_DMA_ID_CC4]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ; - - /* Enable the DMA channel */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)pData, (uint32_t)&htim->Instance->CCR4, - Length) != HAL_OK) - { - /* Return error status */ - return HAL_ERROR; - } - /* Enable the TIM Capture/Compare 4 DMA request */ - __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC4); - break; - } - - default: - status = HAL_ERROR; - break; - } - - if (status == HAL_OK) - { - /* Enable the Capture compare channel */ - TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); - - if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) - { - /* Enable the main output */ - __HAL_TIM_MOE_ENABLE(htim); - } - - /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ - if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) - { - tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; - if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) - { - __HAL_TIM_ENABLE(htim); - } - } - else - { - __HAL_TIM_ENABLE(htim); - } - } - - /* Return function status */ - return status; -} - -/** - * @brief Stops the TIM PWM signal generation in DMA mode. - * @param htim TIM PWM handle - * @param Channel TIM Channels to be disabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @arg TIM_CHANNEL_4: TIM Channel 4 selected - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_PWM_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Check the parameters */ - assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); - - switch (Channel) - { - case TIM_CHANNEL_1: - { - /* Disable the TIM Capture/Compare 1 DMA request */ - __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1); - (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]); - break; - } - - case TIM_CHANNEL_2: - { - /* Disable the TIM Capture/Compare 2 DMA request */ - __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2); - (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC2]); - break; - } - - case TIM_CHANNEL_3: - { - /* Disable the TIM Capture/Compare 3 DMA request */ - __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC3); - (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC3]); - break; - } - - case TIM_CHANNEL_4: - { - /* Disable the TIM Capture/Compare 4 interrupt */ - __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC4); - (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC4]); - break; - } - - default: - status = HAL_ERROR; - break; - } - - if (status == HAL_OK) - { - /* Disable the Capture compare channel */ - TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); - - if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) - { - /* Disable the Main Output */ - __HAL_TIM_MOE_DISABLE(htim); - } - - /* Disable the Peripheral */ - __HAL_TIM_DISABLE(htim); - - /* Set the TIM channel state */ - TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); - } - - /* Return function status */ - return status; -} - -/** - * @} - */ - -/** @defgroup TIM_Exported_Functions_Group4 TIM Input Capture functions - * @brief TIM Input Capture functions - * -@verbatim - ============================================================================== - ##### TIM Input Capture functions ##### - ============================================================================== - [..] - This section provides functions allowing to: - (+) Initialize and configure the TIM Input Capture. - (+) De-initialize the TIM Input Capture. - (+) Start the TIM Input Capture. - (+) Stop the TIM Input Capture. - (+) Start the TIM Input Capture and enable interrupt. - (+) Stop the TIM Input Capture and disable interrupt. - (+) Start the TIM Input Capture and enable DMA transfer. - (+) Stop the TIM Input Capture and disable DMA transfer. - -@endverbatim - * @{ - */ -/** - * @brief Initializes the TIM Input Capture Time base according to the specified - * parameters in the TIM_HandleTypeDef and initializes the associated handle. - * @note Switching from Center Aligned counter mode to Edge counter mode (or reverse) - * requires a timer reset to avoid unexpected direction - * due to DIR bit readonly in center aligned mode. - * Ex: call @ref HAL_TIM_IC_DeInit() before HAL_TIM_IC_Init() - * @param htim TIM Input Capture handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_IC_Init(TIM_HandleTypeDef *htim) -{ - /* Check the TIM handle allocation */ - if (htim == NULL) - { - return HAL_ERROR; - } - - /* Check the parameters */ - assert_param(IS_TIM_INSTANCE(htim->Instance)); - assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode)); - assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision)); - assert_param(IS_TIM_PERIOD(htim, htim->Init.Period)); - assert_param(IS_TIM_AUTORELOAD_PRELOAD(htim->Init.AutoReloadPreload)); - - if (htim->State == HAL_TIM_STATE_RESET) - { - /* Allocate lock resource and initialize it */ - htim->Lock = HAL_UNLOCKED; - -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) - /* Reset interrupt callbacks to legacy weak callbacks */ - TIM_ResetCallback(htim); - - if (htim->IC_MspInitCallback == NULL) - { - htim->IC_MspInitCallback = HAL_TIM_IC_MspInit; - } - /* Init the low level hardware : GPIO, CLOCK, NVIC */ - htim->IC_MspInitCallback(htim); -#else - /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */ - HAL_TIM_IC_MspInit(htim); -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ - } - - /* Set the TIM state */ - htim->State = HAL_TIM_STATE_BUSY; - - /* Init the base time for the input capture */ - TIM_Base_SetConfig(htim->Instance, &htim->Init); - - /* Initialize the DMA burst operation state */ - htim->DMABurstState = HAL_DMA_BURST_STATE_READY; - - /* Initialize the TIM channels state */ - TIM_CHANNEL_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_READY); - TIM_CHANNEL_N_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_READY); - - /* Initialize the TIM state*/ - htim->State = HAL_TIM_STATE_READY; - - return HAL_OK; -} - -/** - * @brief DeInitializes the TIM peripheral - * @param htim TIM Input Capture handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_IC_DeInit(TIM_HandleTypeDef *htim) -{ - /* Check the parameters */ - assert_param(IS_TIM_INSTANCE(htim->Instance)); - - htim->State = HAL_TIM_STATE_BUSY; - - /* Disable the TIM Peripheral Clock */ - __HAL_TIM_DISABLE(htim); - -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) - if (htim->IC_MspDeInitCallback == NULL) - { - htim->IC_MspDeInitCallback = HAL_TIM_IC_MspDeInit; - } - /* DeInit the low level hardware */ - htim->IC_MspDeInitCallback(htim); -#else - /* DeInit the low level hardware: GPIO, CLOCK, NVIC and DMA */ - HAL_TIM_IC_MspDeInit(htim); -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ - - /* Change the DMA burst operation state */ - htim->DMABurstState = HAL_DMA_BURST_STATE_RESET; - - /* Change the TIM channels state */ - TIM_CHANNEL_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_RESET); - TIM_CHANNEL_N_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_RESET); - - /* Change TIM state */ - htim->State = HAL_TIM_STATE_RESET; - - /* Release Lock */ - __HAL_UNLOCK(htim); - - return HAL_OK; -} - -/** - * @brief Initializes the TIM Input Capture MSP. - * @param htim TIM Input Capture handle - * @retval None - */ -__weak void HAL_TIM_IC_MspInit(TIM_HandleTypeDef *htim) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(htim); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_TIM_IC_MspInit could be implemented in the user file - */ -} - -/** - * @brief DeInitializes TIM Input Capture MSP. - * @param htim TIM handle - * @retval None - */ -__weak void HAL_TIM_IC_MspDeInit(TIM_HandleTypeDef *htim) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(htim); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_TIM_IC_MspDeInit could be implemented in the user file - */ -} - -/** - * @brief Starts the TIM Input Capture measurement. - * @param htim TIM Input Capture handle - * @param Channel TIM Channels to be enabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @arg TIM_CHANNEL_4: TIM Channel 4 selected - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_IC_Start(TIM_HandleTypeDef *htim, uint32_t Channel) -{ - uint32_t tmpsmcr; - HAL_TIM_ChannelStateTypeDef channel_state = TIM_CHANNEL_STATE_GET(htim, Channel); - HAL_TIM_ChannelStateTypeDef complementary_channel_state = TIM_CHANNEL_N_STATE_GET(htim, Channel); - - /* Check the parameters */ - assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); - - /* Check the TIM channel state */ - if ((channel_state != HAL_TIM_CHANNEL_STATE_READY) - || (complementary_channel_state != HAL_TIM_CHANNEL_STATE_READY)) - { - return HAL_ERROR; - } - - /* Set the TIM channel state */ - TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); - TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); - - /* Enable the Input Capture channel */ - TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); - - /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ - if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) - { - tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; - if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) - { - __HAL_TIM_ENABLE(htim); - } - } - else - { - __HAL_TIM_ENABLE(htim); - } - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Stops the TIM Input Capture measurement. - * @param htim TIM Input Capture handle - * @param Channel TIM Channels to be disabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @arg TIM_CHANNEL_4: TIM Channel 4 selected - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_IC_Stop(TIM_HandleTypeDef *htim, uint32_t Channel) -{ - /* Check the parameters */ - assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); - - /* Disable the Input Capture channel */ - TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); - - /* Disable the Peripheral */ - __HAL_TIM_DISABLE(htim); - - /* Set the TIM channel state */ - TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); - TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Starts the TIM Input Capture measurement in interrupt mode. - * @param htim TIM Input Capture handle - * @param Channel TIM Channels to be enabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @arg TIM_CHANNEL_4: TIM Channel 4 selected - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_IC_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel) -{ - HAL_StatusTypeDef status = HAL_OK; - uint32_t tmpsmcr; - - HAL_TIM_ChannelStateTypeDef channel_state = TIM_CHANNEL_STATE_GET(htim, Channel); - HAL_TIM_ChannelStateTypeDef complementary_channel_state = TIM_CHANNEL_N_STATE_GET(htim, Channel); - - /* Check the parameters */ - assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); - - /* Check the TIM channel state */ - if ((channel_state != HAL_TIM_CHANNEL_STATE_READY) - || (complementary_channel_state != HAL_TIM_CHANNEL_STATE_READY)) - { - return HAL_ERROR; - } - - /* Set the TIM channel state */ - TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); - TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); - - switch (Channel) - { - case TIM_CHANNEL_1: - { - /* Enable the TIM Capture/Compare 1 interrupt */ - __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); - break; - } - - case TIM_CHANNEL_2: - { - /* Enable the TIM Capture/Compare 2 interrupt */ - __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2); - break; - } - - case TIM_CHANNEL_3: - { - /* Enable the TIM Capture/Compare 3 interrupt */ - __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC3); - break; - } - - case TIM_CHANNEL_4: - { - /* Enable the TIM Capture/Compare 4 interrupt */ - __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC4); - break; - } - - default: - status = HAL_ERROR; - break; - } - - if (status == HAL_OK) - { - /* Enable the Input Capture channel */ - TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); - - /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ - if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) - { - tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; - if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) - { - __HAL_TIM_ENABLE(htim); - } - } - else - { - __HAL_TIM_ENABLE(htim); - } - } - - /* Return function status */ - return status; -} - -/** - * @brief Stops the TIM Input Capture measurement in interrupt mode. - * @param htim TIM Input Capture handle - * @param Channel TIM Channels to be disabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @arg TIM_CHANNEL_4: TIM Channel 4 selected - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_IC_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Check the parameters */ - assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); - - switch (Channel) - { - case TIM_CHANNEL_1: - { - /* Disable the TIM Capture/Compare 1 interrupt */ - __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1); - break; - } - - case TIM_CHANNEL_2: - { - /* Disable the TIM Capture/Compare 2 interrupt */ - __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2); - break; - } - - case TIM_CHANNEL_3: - { - /* Disable the TIM Capture/Compare 3 interrupt */ - __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC3); - break; - } - - case TIM_CHANNEL_4: - { - /* Disable the TIM Capture/Compare 4 interrupt */ - __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC4); - break; - } - - default: - status = HAL_ERROR; - break; - } - - if (status == HAL_OK) - { - /* Disable the Input Capture channel */ - TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); - - /* Disable the Peripheral */ - __HAL_TIM_DISABLE(htim); - - /* Set the TIM channel state */ - TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); - TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); - } - - /* Return function status */ - return status; -} - -/** - * @brief Starts the TIM Input Capture measurement in DMA mode. - * @param htim TIM Input Capture handle - * @param Channel TIM Channels to be enabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @arg TIM_CHANNEL_4: TIM Channel 4 selected - * @param pData The destination Buffer address. - * @param Length The length of data to be transferred from TIM peripheral to memory. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_IC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length) -{ - HAL_StatusTypeDef status = HAL_OK; - uint32_t tmpsmcr; - - HAL_TIM_ChannelStateTypeDef channel_state = TIM_CHANNEL_STATE_GET(htim, Channel); - HAL_TIM_ChannelStateTypeDef complementary_channel_state = TIM_CHANNEL_N_STATE_GET(htim, Channel); - - /* Check the parameters */ - assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); - assert_param(IS_TIM_DMA_CC_INSTANCE(htim->Instance)); - - /* Set the TIM channel state */ - if ((channel_state == HAL_TIM_CHANNEL_STATE_BUSY) - || (complementary_channel_state == HAL_TIM_CHANNEL_STATE_BUSY)) - { - return HAL_BUSY; - } - else if ((channel_state == HAL_TIM_CHANNEL_STATE_READY) - && (complementary_channel_state == HAL_TIM_CHANNEL_STATE_READY)) - { - if ((pData == NULL) || (Length == 0U)) - { - return HAL_ERROR; - } - else - { - TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); - TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); - } - } - else - { - return HAL_ERROR; - } - - /* Enable the Input Capture channel */ - TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); - - switch (Channel) - { - case TIM_CHANNEL_1: - { - /* Set the DMA capture callbacks */ - htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMACaptureCplt; - htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ; - - /* Enable the DMA channel */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->CCR1, (uint32_t)pData, - Length) != HAL_OK) - { - /* Return error status */ - return HAL_ERROR; - } - /* Enable the TIM Capture/Compare 1 DMA request */ - __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1); - break; - } - - case TIM_CHANNEL_2: - { - /* Set the DMA capture callbacks */ - htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMACaptureCplt; - htim->hdma[TIM_DMA_ID_CC2]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ; - - /* Enable the DMA channel */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)&htim->Instance->CCR2, (uint32_t)pData, - Length) != HAL_OK) - { - /* Return error status */ - return HAL_ERROR; - } - /* Enable the TIM Capture/Compare 2 DMA request */ - __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2); - break; - } - - case TIM_CHANNEL_3: - { - /* Set the DMA capture callbacks */ - htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMACaptureCplt; - htim->hdma[TIM_DMA_ID_CC3]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ; - - /* Enable the DMA channel */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)&htim->Instance->CCR3, (uint32_t)pData, - Length) != HAL_OK) - { - /* Return error status */ - return HAL_ERROR; - } - /* Enable the TIM Capture/Compare 3 DMA request */ - __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC3); - break; - } - - case TIM_CHANNEL_4: - { - /* Set the DMA capture callbacks */ - htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = TIM_DMACaptureCplt; - htim->hdma[TIM_DMA_ID_CC4]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ; - - /* Enable the DMA channel */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)&htim->Instance->CCR4, (uint32_t)pData, - Length) != HAL_OK) - { - /* Return error status */ - return HAL_ERROR; - } - /* Enable the TIM Capture/Compare 4 DMA request */ - __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC4); - break; - } - - default: - status = HAL_ERROR; - break; - } - - /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ - if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) - { - tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; - if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) - { - __HAL_TIM_ENABLE(htim); - } - } - else - { - __HAL_TIM_ENABLE(htim); - } - - /* Return function status */ - return status; -} - -/** - * @brief Stops the TIM Input Capture measurement in DMA mode. - * @param htim TIM Input Capture handle - * @param Channel TIM Channels to be disabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @arg TIM_CHANNEL_4: TIM Channel 4 selected - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_IC_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Check the parameters */ - assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); - assert_param(IS_TIM_DMA_CC_INSTANCE(htim->Instance)); - - /* Disable the Input Capture channel */ - TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); - - switch (Channel) - { - case TIM_CHANNEL_1: - { - /* Disable the TIM Capture/Compare 1 DMA request */ - __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1); - (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]); - break; - } - - case TIM_CHANNEL_2: - { - /* Disable the TIM Capture/Compare 2 DMA request */ - __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2); - (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC2]); - break; - } - - case TIM_CHANNEL_3: - { - /* Disable the TIM Capture/Compare 3 DMA request */ - __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC3); - (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC3]); - break; - } - - case TIM_CHANNEL_4: - { - /* Disable the TIM Capture/Compare 4 DMA request */ - __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC4); - (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC4]); - break; - } - - default: - status = HAL_ERROR; - break; - } - - if (status == HAL_OK) - { - /* Disable the Peripheral */ - __HAL_TIM_DISABLE(htim); - - /* Set the TIM channel state */ - TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); - TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); - } - - /* Return function status */ - return status; -} -/** - * @} - */ - -/** @defgroup TIM_Exported_Functions_Group5 TIM One Pulse functions - * @brief TIM One Pulse functions - * -@verbatim - ============================================================================== - ##### TIM One Pulse functions ##### - ============================================================================== - [..] - This section provides functions allowing to: - (+) Initialize and configure the TIM One Pulse. - (+) De-initialize the TIM One Pulse. - (+) Start the TIM One Pulse. - (+) Stop the TIM One Pulse. - (+) Start the TIM One Pulse and enable interrupt. - (+) Stop the TIM One Pulse and disable interrupt. - (+) Start the TIM One Pulse and enable DMA transfer. - (+) Stop the TIM One Pulse and disable DMA transfer. - -@endverbatim - * @{ - */ -/** - * @brief Initializes the TIM One Pulse Time Base according to the specified - * parameters in the TIM_HandleTypeDef and initializes the associated handle. - * @note Switching from Center Aligned counter mode to Edge counter mode (or reverse) - * requires a timer reset to avoid unexpected direction - * due to DIR bit readonly in center aligned mode. - * Ex: call @ref HAL_TIM_OnePulse_DeInit() before HAL_TIM_OnePulse_Init() - * @note When the timer instance is initialized in One Pulse mode, timer - * channels 1 and channel 2 are reserved and cannot be used for other - * purpose. - * @param htim TIM One Pulse handle - * @param OnePulseMode Select the One pulse mode. - * This parameter can be one of the following values: - * @arg TIM_OPMODE_SINGLE: Only one pulse will be generated. - * @arg TIM_OPMODE_REPETITIVE: Repetitive pulses will be generated. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_OnePulse_Init(TIM_HandleTypeDef *htim, uint32_t OnePulseMode) -{ - /* Check the TIM handle allocation */ - if (htim == NULL) - { - return HAL_ERROR; - } - - /* Check the parameters */ - assert_param(IS_TIM_INSTANCE(htim->Instance)); - assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode)); - assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision)); - assert_param(IS_TIM_OPM_MODE(OnePulseMode)); - assert_param(IS_TIM_PERIOD(htim, htim->Init.Period)); - assert_param(IS_TIM_AUTORELOAD_PRELOAD(htim->Init.AutoReloadPreload)); - - if (htim->State == HAL_TIM_STATE_RESET) - { - /* Allocate lock resource and initialize it */ - htim->Lock = HAL_UNLOCKED; - -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) - /* Reset interrupt callbacks to legacy weak callbacks */ - TIM_ResetCallback(htim); - - if (htim->OnePulse_MspInitCallback == NULL) - { - htim->OnePulse_MspInitCallback = HAL_TIM_OnePulse_MspInit; - } - /* Init the low level hardware : GPIO, CLOCK, NVIC */ - htim->OnePulse_MspInitCallback(htim); -#else - /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */ - HAL_TIM_OnePulse_MspInit(htim); -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ - } - - /* Set the TIM state */ - htim->State = HAL_TIM_STATE_BUSY; - - /* Configure the Time base in the One Pulse Mode */ - TIM_Base_SetConfig(htim->Instance, &htim->Init); - - /* Reset the OPM Bit */ - htim->Instance->CR1 &= ~TIM_CR1_OPM; - - /* Configure the OPM Mode */ - htim->Instance->CR1 |= OnePulseMode; - - /* Initialize the DMA burst operation state */ - htim->DMABurstState = HAL_DMA_BURST_STATE_READY; - - /* Initialize the TIM channels state */ - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); - - /* Initialize the TIM state*/ - htim->State = HAL_TIM_STATE_READY; - - return HAL_OK; -} - -/** - * @brief DeInitializes the TIM One Pulse - * @param htim TIM One Pulse handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_OnePulse_DeInit(TIM_HandleTypeDef *htim) -{ - /* Check the parameters */ - assert_param(IS_TIM_INSTANCE(htim->Instance)); - - htim->State = HAL_TIM_STATE_BUSY; - - /* Disable the TIM Peripheral Clock */ - __HAL_TIM_DISABLE(htim); - -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) - if (htim->OnePulse_MspDeInitCallback == NULL) - { - htim->OnePulse_MspDeInitCallback = HAL_TIM_OnePulse_MspDeInit; - } - /* DeInit the low level hardware */ - htim->OnePulse_MspDeInitCallback(htim); -#else - /* DeInit the low level hardware: GPIO, CLOCK, NVIC */ - HAL_TIM_OnePulse_MspDeInit(htim); -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ - - /* Change the DMA burst operation state */ - htim->DMABurstState = HAL_DMA_BURST_STATE_RESET; - - /* Set the TIM channel state */ - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_RESET); - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_RESET); - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_RESET); - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_RESET); - - /* Change TIM state */ - htim->State = HAL_TIM_STATE_RESET; - - /* Release Lock */ - __HAL_UNLOCK(htim); - - return HAL_OK; -} - -/** - * @brief Initializes the TIM One Pulse MSP. - * @param htim TIM One Pulse handle - * @retval None - */ -__weak void HAL_TIM_OnePulse_MspInit(TIM_HandleTypeDef *htim) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(htim); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_TIM_OnePulse_MspInit could be implemented in the user file - */ -} - -/** - * @brief DeInitializes TIM One Pulse MSP. - * @param htim TIM One Pulse handle - * @retval None - */ -__weak void HAL_TIM_OnePulse_MspDeInit(TIM_HandleTypeDef *htim) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(htim); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_TIM_OnePulse_MspDeInit could be implemented in the user file - */ -} - -/** - * @brief Starts the TIM One Pulse signal generation. - * @note Though OutputChannel parameter is deprecated and ignored by the function - * it has been kept to avoid HAL_TIM API compatibility break. - * @note The pulse output channel is determined when calling - * @ref HAL_TIM_OnePulse_ConfigChannel(). - * @param htim TIM One Pulse handle - * @param OutputChannel See note above - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_OnePulse_Start(TIM_HandleTypeDef *htim, uint32_t OutputChannel) -{ - HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1); - HAL_TIM_ChannelStateTypeDef channel_2_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_2); - HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1); - HAL_TIM_ChannelStateTypeDef complementary_channel_2_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_2); - - /* Prevent unused argument(s) compilation warning */ - UNUSED(OutputChannel); - - /* Check the TIM channels state */ - if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY) - || (channel_2_state != HAL_TIM_CHANNEL_STATE_READY) - || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY) - || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY)) - { - return HAL_ERROR; - } - - /* Set the TIM channels state */ - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); - - /* Enable the Capture compare and the Input Capture channels - (in the OPM Mode the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) - if TIM_CHANNEL_1 is used as output, the TIM_CHANNEL_2 will be used as input and - if TIM_CHANNEL_1 is used as input, the TIM_CHANNEL_2 will be used as output - whatever the combination, the TIM_CHANNEL_1 and TIM_CHANNEL_2 should be enabled together - - No need to enable the counter, it's enabled automatically by hardware - (the counter starts in response to a stimulus and generate a pulse */ - - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE); - - if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) - { - /* Enable the main output */ - __HAL_TIM_MOE_ENABLE(htim); - } - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Stops the TIM One Pulse signal generation. - * @note Though OutputChannel parameter is deprecated and ignored by the function - * it has been kept to avoid HAL_TIM API compatibility break. - * @note The pulse output channel is determined when calling - * @ref HAL_TIM_OnePulse_ConfigChannel(). - * @param htim TIM One Pulse handle - * @param OutputChannel See note above - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_OnePulse_Stop(TIM_HandleTypeDef *htim, uint32_t OutputChannel) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(OutputChannel); - - /* Disable the Capture compare and the Input Capture channels - (in the OPM Mode the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) - if TIM_CHANNEL_1 is used as output, the TIM_CHANNEL_2 will be used as input and - if TIM_CHANNEL_1 is used as input, the TIM_CHANNEL_2 will be used as output - whatever the combination, the TIM_CHANNEL_1 and TIM_CHANNEL_2 should be disabled together */ - - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE); - - if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) - { - /* Disable the Main Output */ - __HAL_TIM_MOE_DISABLE(htim); - } - - /* Disable the Peripheral */ - __HAL_TIM_DISABLE(htim); - - /* Set the TIM channels state */ - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Starts the TIM One Pulse signal generation in interrupt mode. - * @note Though OutputChannel parameter is deprecated and ignored by the function - * it has been kept to avoid HAL_TIM API compatibility break. - * @note The pulse output channel is determined when calling - * @ref HAL_TIM_OnePulse_ConfigChannel(). - * @param htim TIM One Pulse handle - * @param OutputChannel See note above - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_OnePulse_Start_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel) -{ - HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1); - HAL_TIM_ChannelStateTypeDef channel_2_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_2); - HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1); - HAL_TIM_ChannelStateTypeDef complementary_channel_2_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_2); - - /* Prevent unused argument(s) compilation warning */ - UNUSED(OutputChannel); - - /* Check the TIM channels state */ - if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY) - || (channel_2_state != HAL_TIM_CHANNEL_STATE_READY) - || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY) - || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY)) - { - return HAL_ERROR; - } - - /* Set the TIM channels state */ - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); - - /* Enable the Capture compare and the Input Capture channels - (in the OPM Mode the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) - if TIM_CHANNEL_1 is used as output, the TIM_CHANNEL_2 will be used as input and - if TIM_CHANNEL_1 is used as input, the TIM_CHANNEL_2 will be used as output - whatever the combination, the TIM_CHANNEL_1 and TIM_CHANNEL_2 should be enabled together - - No need to enable the counter, it's enabled automatically by hardware - (the counter starts in response to a stimulus and generate a pulse */ - - /* Enable the TIM Capture/Compare 1 interrupt */ - __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); - - /* Enable the TIM Capture/Compare 2 interrupt */ - __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2); - - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE); - - if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) - { - /* Enable the main output */ - __HAL_TIM_MOE_ENABLE(htim); - } - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Stops the TIM One Pulse signal generation in interrupt mode. - * @note Though OutputChannel parameter is deprecated and ignored by the function - * it has been kept to avoid HAL_TIM API compatibility break. - * @note The pulse output channel is determined when calling - * @ref HAL_TIM_OnePulse_ConfigChannel(). - * @param htim TIM One Pulse handle - * @param OutputChannel See note above - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_OnePulse_Stop_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(OutputChannel); - - /* Disable the TIM Capture/Compare 1 interrupt */ - __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1); - - /* Disable the TIM Capture/Compare 2 interrupt */ - __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2); - - /* Disable the Capture compare and the Input Capture channels - (in the OPM Mode the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) - if TIM_CHANNEL_1 is used as output, the TIM_CHANNEL_2 will be used as input and - if TIM_CHANNEL_1 is used as input, the TIM_CHANNEL_2 will be used as output - whatever the combination, the TIM_CHANNEL_1 and TIM_CHANNEL_2 should be disabled together */ - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE); - - if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) - { - /* Disable the Main Output */ - __HAL_TIM_MOE_DISABLE(htim); - } - - /* Disable the Peripheral */ - __HAL_TIM_DISABLE(htim); - - /* Set the TIM channels state */ - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); - - /* Return function status */ - return HAL_OK; -} - -/** - * @} - */ - -/** @defgroup TIM_Exported_Functions_Group6 TIM Encoder functions - * @brief TIM Encoder functions - * -@verbatim - ============================================================================== - ##### TIM Encoder functions ##### - ============================================================================== - [..] - This section provides functions allowing to: - (+) Initialize and configure the TIM Encoder. - (+) De-initialize the TIM Encoder. - (+) Start the TIM Encoder. - (+) Stop the TIM Encoder. - (+) Start the TIM Encoder and enable interrupt. - (+) Stop the TIM Encoder and disable interrupt. - (+) Start the TIM Encoder and enable DMA transfer. - (+) Stop the TIM Encoder and disable DMA transfer. - -@endverbatim - * @{ - */ -/** - * @brief Initializes the TIM Encoder Interface and initialize the associated handle. - * @note Switching from Center Aligned counter mode to Edge counter mode (or reverse) - * requires a timer reset to avoid unexpected direction - * due to DIR bit readonly in center aligned mode. - * Ex: call @ref HAL_TIM_Encoder_DeInit() before HAL_TIM_Encoder_Init() - * @note Encoder mode and External clock mode 2 are not compatible and must not be selected together - * Ex: A call for @ref HAL_TIM_Encoder_Init will erase the settings of @ref HAL_TIM_ConfigClockSource - * using TIM_CLOCKSOURCE_ETRMODE2 and vice versa - * @note When the timer instance is initialized in Encoder mode, timer - * channels 1 and channel 2 are reserved and cannot be used for other - * purpose. - * @param htim TIM Encoder Interface handle - * @param sConfig TIM Encoder Interface configuration structure - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_Encoder_Init(TIM_HandleTypeDef *htim, TIM_Encoder_InitTypeDef *sConfig) -{ - uint32_t tmpsmcr; - uint32_t tmpccmr1; - uint32_t tmpccer; - - /* Check the TIM handle allocation */ - if (htim == NULL) - { - return HAL_ERROR; - } - - /* Check the parameters */ - assert_param(IS_TIM_ENCODER_INTERFACE_INSTANCE(htim->Instance)); - assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode)); - assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision)); - assert_param(IS_TIM_AUTORELOAD_PRELOAD(htim->Init.AutoReloadPreload)); - assert_param(IS_TIM_ENCODER_MODE(sConfig->EncoderMode)); - assert_param(IS_TIM_IC_SELECTION(sConfig->IC1Selection)); - assert_param(IS_TIM_IC_SELECTION(sConfig->IC2Selection)); - assert_param(IS_TIM_ENCODERINPUT_POLARITY(sConfig->IC1Polarity)); - assert_param(IS_TIM_ENCODERINPUT_POLARITY(sConfig->IC2Polarity)); - assert_param(IS_TIM_IC_PRESCALER(sConfig->IC1Prescaler)); - assert_param(IS_TIM_IC_PRESCALER(sConfig->IC2Prescaler)); - assert_param(IS_TIM_IC_FILTER(sConfig->IC1Filter)); - assert_param(IS_TIM_IC_FILTER(sConfig->IC2Filter)); - assert_param(IS_TIM_PERIOD(htim, htim->Init.Period)); - - if (htim->State == HAL_TIM_STATE_RESET) - { - /* Allocate lock resource and initialize it */ - htim->Lock = HAL_UNLOCKED; - -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) - /* Reset interrupt callbacks to legacy weak callbacks */ - TIM_ResetCallback(htim); - - if (htim->Encoder_MspInitCallback == NULL) - { - htim->Encoder_MspInitCallback = HAL_TIM_Encoder_MspInit; - } - /* Init the low level hardware : GPIO, CLOCK, NVIC */ - htim->Encoder_MspInitCallback(htim); -#else - /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */ - HAL_TIM_Encoder_MspInit(htim); -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ - } - - /* Set the TIM state */ - htim->State = HAL_TIM_STATE_BUSY; - - /* Reset the SMS and ECE bits */ - htim->Instance->SMCR &= ~(TIM_SMCR_SMS | TIM_SMCR_ECE); - - /* Configure the Time base in the Encoder Mode */ - TIM_Base_SetConfig(htim->Instance, &htim->Init); - - /* Get the TIMx SMCR register value */ - tmpsmcr = htim->Instance->SMCR; - - /* Get the TIMx CCMR1 register value */ - tmpccmr1 = htim->Instance->CCMR1; - - /* Get the TIMx CCER register value */ - tmpccer = htim->Instance->CCER; - - /* Set the encoder Mode */ - tmpsmcr |= sConfig->EncoderMode; - - /* Select the Capture Compare 1 and the Capture Compare 2 as input */ - tmpccmr1 &= ~(TIM_CCMR1_CC1S | TIM_CCMR1_CC2S); - tmpccmr1 |= (sConfig->IC1Selection | (sConfig->IC2Selection << 8U)); - - /* Set the Capture Compare 1 and the Capture Compare 2 prescalers and filters */ - tmpccmr1 &= ~(TIM_CCMR1_IC1PSC | TIM_CCMR1_IC2PSC); - tmpccmr1 &= ~(TIM_CCMR1_IC1F | TIM_CCMR1_IC2F); - tmpccmr1 |= sConfig->IC1Prescaler | (sConfig->IC2Prescaler << 8U); - tmpccmr1 |= (sConfig->IC1Filter << 4U) | (sConfig->IC2Filter << 12U); - - /* Set the TI1 and the TI2 Polarities */ - tmpccer &= ~(TIM_CCER_CC1P | TIM_CCER_CC2P); - tmpccer &= ~(TIM_CCER_CC1NP | TIM_CCER_CC2NP); - tmpccer |= sConfig->IC1Polarity | (sConfig->IC2Polarity << 4U); - - /* Write to TIMx SMCR */ - htim->Instance->SMCR = tmpsmcr; - - /* Write to TIMx CCMR1 */ - htim->Instance->CCMR1 = tmpccmr1; - - /* Write to TIMx CCER */ - htim->Instance->CCER = tmpccer; - - /* Initialize the DMA burst operation state */ - htim->DMABurstState = HAL_DMA_BURST_STATE_READY; - - /* Set the TIM channels state */ - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); - - /* Initialize the TIM state*/ - htim->State = HAL_TIM_STATE_READY; - - return HAL_OK; -} - - -/** - * @brief DeInitializes the TIM Encoder interface - * @param htim TIM Encoder Interface handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_Encoder_DeInit(TIM_HandleTypeDef *htim) -{ - /* Check the parameters */ - assert_param(IS_TIM_INSTANCE(htim->Instance)); - - htim->State = HAL_TIM_STATE_BUSY; - - /* Disable the TIM Peripheral Clock */ - __HAL_TIM_DISABLE(htim); - -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) - if (htim->Encoder_MspDeInitCallback == NULL) - { - htim->Encoder_MspDeInitCallback = HAL_TIM_Encoder_MspDeInit; - } - /* DeInit the low level hardware */ - htim->Encoder_MspDeInitCallback(htim); -#else - /* DeInit the low level hardware: GPIO, CLOCK, NVIC */ - HAL_TIM_Encoder_MspDeInit(htim); -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ - - /* Change the DMA burst operation state */ - htim->DMABurstState = HAL_DMA_BURST_STATE_RESET; - - /* Set the TIM channels state */ - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_RESET); - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_RESET); - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_RESET); - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_RESET); - - /* Change TIM state */ - htim->State = HAL_TIM_STATE_RESET; - - /* Release Lock */ - __HAL_UNLOCK(htim); - - return HAL_OK; -} - -/** - * @brief Initializes the TIM Encoder Interface MSP. - * @param htim TIM Encoder Interface handle - * @retval None - */ -__weak void HAL_TIM_Encoder_MspInit(TIM_HandleTypeDef *htim) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(htim); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_TIM_Encoder_MspInit could be implemented in the user file - */ -} - -/** - * @brief DeInitializes TIM Encoder Interface MSP. - * @param htim TIM Encoder Interface handle - * @retval None - */ -__weak void HAL_TIM_Encoder_MspDeInit(TIM_HandleTypeDef *htim) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(htim); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_TIM_Encoder_MspDeInit could be implemented in the user file - */ -} - -/** - * @brief Starts the TIM Encoder Interface. - * @param htim TIM Encoder Interface handle - * @param Channel TIM Channels to be enabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_Encoder_Start(TIM_HandleTypeDef *htim, uint32_t Channel) -{ - HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1); - HAL_TIM_ChannelStateTypeDef channel_2_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_2); - HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1); - HAL_TIM_ChannelStateTypeDef complementary_channel_2_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_2); - - /* Check the parameters */ - assert_param(IS_TIM_ENCODER_INTERFACE_INSTANCE(htim->Instance)); - - /* Set the TIM channel(s) state */ - if (Channel == TIM_CHANNEL_1) - { - if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY) - || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY)) - { - return HAL_ERROR; - } - else - { - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); - } - } - else if (Channel == TIM_CHANNEL_2) - { - if ((channel_2_state != HAL_TIM_CHANNEL_STATE_READY) - || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY)) - { - return HAL_ERROR; - } - else - { - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); - } - } - else - { - if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY) - || (channel_2_state != HAL_TIM_CHANNEL_STATE_READY) - || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY) - || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY)) - { - return HAL_ERROR; - } - else - { - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); - } - } - - /* Enable the encoder interface channels */ - switch (Channel) - { - case TIM_CHANNEL_1: - { - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); - break; - } - - case TIM_CHANNEL_2: - { - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE); - break; - } - - default : - { - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE); - break; - } - } - /* Enable the Peripheral */ - __HAL_TIM_ENABLE(htim); - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Stops the TIM Encoder Interface. - * @param htim TIM Encoder Interface handle - * @param Channel TIM Channels to be disabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_Encoder_Stop(TIM_HandleTypeDef *htim, uint32_t Channel) -{ - /* Check the parameters */ - assert_param(IS_TIM_ENCODER_INTERFACE_INSTANCE(htim->Instance)); - - /* Disable the Input Capture channels 1 and 2 - (in the EncoderInterface the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) */ - switch (Channel) - { - case TIM_CHANNEL_1: - { - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); - break; - } - - case TIM_CHANNEL_2: - { - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE); - break; - } - - default : - { - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE); - break; - } - } - - /* Disable the Peripheral */ - __HAL_TIM_DISABLE(htim); - - /* Set the TIM channel(s) state */ - if ((Channel == TIM_CHANNEL_1) || (Channel == TIM_CHANNEL_2)) - { - TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); - TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); - } - else - { - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); - } - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Starts the TIM Encoder Interface in interrupt mode. - * @param htim TIM Encoder Interface handle - * @param Channel TIM Channels to be enabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_Encoder_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel) -{ - HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1); - HAL_TIM_ChannelStateTypeDef channel_2_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_2); - HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1); - HAL_TIM_ChannelStateTypeDef complementary_channel_2_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_2); - - /* Check the parameters */ - assert_param(IS_TIM_ENCODER_INTERFACE_INSTANCE(htim->Instance)); - - /* Set the TIM channel(s) state */ - if (Channel == TIM_CHANNEL_1) - { - if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY) - || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY)) - { - return HAL_ERROR; - } - else - { - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); - } - } - else if (Channel == TIM_CHANNEL_2) - { - if ((channel_2_state != HAL_TIM_CHANNEL_STATE_READY) - || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY)) - { - return HAL_ERROR; - } - else - { - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); - } - } - else - { - if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY) - || (channel_2_state != HAL_TIM_CHANNEL_STATE_READY) - || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY) - || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY)) - { - return HAL_ERROR; - } - else - { - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); - } - } - - /* Enable the encoder interface channels */ - /* Enable the capture compare Interrupts 1 and/or 2 */ - switch (Channel) - { - case TIM_CHANNEL_1: - { - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); - __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); - break; - } - - case TIM_CHANNEL_2: - { - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE); - __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2); - break; - } - - default : - { - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE); - __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); - __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2); - break; - } - } - - /* Enable the Peripheral */ - __HAL_TIM_ENABLE(htim); - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Stops the TIM Encoder Interface in interrupt mode. - * @param htim TIM Encoder Interface handle - * @param Channel TIM Channels to be disabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_Encoder_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel) -{ - /* Check the parameters */ - assert_param(IS_TIM_ENCODER_INTERFACE_INSTANCE(htim->Instance)); - - /* Disable the Input Capture channels 1 and 2 - (in the EncoderInterface the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) */ - if (Channel == TIM_CHANNEL_1) - { - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); - - /* Disable the capture compare Interrupts 1 */ - __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1); - } - else if (Channel == TIM_CHANNEL_2) - { - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE); - - /* Disable the capture compare Interrupts 2 */ - __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2); - } - else - { - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE); - - /* Disable the capture compare Interrupts 1 and 2 */ - __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1); - __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2); - } - - /* Disable the Peripheral */ - __HAL_TIM_DISABLE(htim); - - /* Set the TIM channel(s) state */ - if ((Channel == TIM_CHANNEL_1) || (Channel == TIM_CHANNEL_2)) - { - TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); - TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); - } - else - { - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); - } - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Starts the TIM Encoder Interface in DMA mode. - * @param htim TIM Encoder Interface handle - * @param Channel TIM Channels to be enabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected - * @param pData1 The destination Buffer address for IC1. - * @param pData2 The destination Buffer address for IC2. - * @param Length The length of data to be transferred from TIM peripheral to memory. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_Encoder_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData1, - uint32_t *pData2, uint16_t Length) -{ - HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1); - HAL_TIM_ChannelStateTypeDef channel_2_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_2); - HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1); - HAL_TIM_ChannelStateTypeDef complementary_channel_2_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_2); - - /* Check the parameters */ - assert_param(IS_TIM_ENCODER_INTERFACE_INSTANCE(htim->Instance)); - - /* Set the TIM channel(s) state */ - if (Channel == TIM_CHANNEL_1) - { - if ((channel_1_state == HAL_TIM_CHANNEL_STATE_BUSY) - || (complementary_channel_1_state == HAL_TIM_CHANNEL_STATE_BUSY)) - { - return HAL_BUSY; - } - else if ((channel_1_state == HAL_TIM_CHANNEL_STATE_READY) - && (complementary_channel_1_state == HAL_TIM_CHANNEL_STATE_READY)) - { - if ((pData1 == NULL) || (Length == 0U)) - { - return HAL_ERROR; - } - else - { - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); - } - } - else - { - return HAL_ERROR; - } - } - else if (Channel == TIM_CHANNEL_2) - { - if ((channel_2_state == HAL_TIM_CHANNEL_STATE_BUSY) - || (complementary_channel_2_state == HAL_TIM_CHANNEL_STATE_BUSY)) - { - return HAL_BUSY; - } - else if ((channel_2_state == HAL_TIM_CHANNEL_STATE_READY) - && (complementary_channel_2_state == HAL_TIM_CHANNEL_STATE_READY)) - { - if ((pData2 == NULL) || (Length == 0U)) - { - return HAL_ERROR; - } - else - { - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); - } - } - else - { - return HAL_ERROR; - } - } - else - { - if ((channel_1_state == HAL_TIM_CHANNEL_STATE_BUSY) - || (channel_2_state == HAL_TIM_CHANNEL_STATE_BUSY) - || (complementary_channel_1_state == HAL_TIM_CHANNEL_STATE_BUSY) - || (complementary_channel_2_state == HAL_TIM_CHANNEL_STATE_BUSY)) - { - return HAL_BUSY; - } - else if ((channel_1_state == HAL_TIM_CHANNEL_STATE_READY) - && (channel_2_state == HAL_TIM_CHANNEL_STATE_READY) - && (complementary_channel_1_state == HAL_TIM_CHANNEL_STATE_READY) - && (complementary_channel_2_state == HAL_TIM_CHANNEL_STATE_READY)) - { - if ((((pData1 == NULL) || (pData2 == NULL))) || (Length == 0U)) - { - return HAL_ERROR; - } - else - { - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); - } - } - else - { - return HAL_ERROR; - } - } - - switch (Channel) - { - case TIM_CHANNEL_1: - { - /* Set the DMA capture callbacks */ - htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMACaptureCplt; - htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ; - - /* Enable the DMA channel */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->CCR1, (uint32_t)pData1, - Length) != HAL_OK) - { - /* Return error status */ - return HAL_ERROR; - } - /* Enable the TIM Input Capture DMA request */ - __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1); - - /* Enable the Capture compare channel */ - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); - - /* Enable the Peripheral */ - __HAL_TIM_ENABLE(htim); - - break; - } - - case TIM_CHANNEL_2: - { - /* Set the DMA capture callbacks */ - htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMACaptureCplt; - htim->hdma[TIM_DMA_ID_CC2]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError; - /* Enable the DMA channel */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)&htim->Instance->CCR2, (uint32_t)pData2, - Length) != HAL_OK) - { - /* Return error status */ - return HAL_ERROR; - } - /* Enable the TIM Input Capture DMA request */ - __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2); - - /* Enable the Capture compare channel */ - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE); - - /* Enable the Peripheral */ - __HAL_TIM_ENABLE(htim); - - break; - } - - default: - { - /* Set the DMA capture callbacks */ - htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMACaptureCplt; - htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ; - - /* Enable the DMA channel */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->CCR1, (uint32_t)pData1, - Length) != HAL_OK) - { - /* Return error status */ - return HAL_ERROR; - } - - /* Set the DMA capture callbacks */ - htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMACaptureCplt; - htim->hdma[TIM_DMA_ID_CC2]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ; - - /* Enable the DMA channel */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)&htim->Instance->CCR2, (uint32_t)pData2, - Length) != HAL_OK) - { - /* Return error status */ - return HAL_ERROR; - } - - /* Enable the TIM Input Capture DMA request */ - __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1); - /* Enable the TIM Input Capture DMA request */ - __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2); - - /* Enable the Capture compare channel */ - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE); - - /* Enable the Peripheral */ - __HAL_TIM_ENABLE(htim); - - break; - } - } - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Stops the TIM Encoder Interface in DMA mode. - * @param htim TIM Encoder Interface handle - * @param Channel TIM Channels to be enabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_Encoder_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel) -{ - /* Check the parameters */ - assert_param(IS_TIM_ENCODER_INTERFACE_INSTANCE(htim->Instance)); - - /* Disable the Input Capture channels 1 and 2 - (in the EncoderInterface the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) */ - if (Channel == TIM_CHANNEL_1) - { - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); - - /* Disable the capture compare DMA Request 1 */ - __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1); - (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]); - } - else if (Channel == TIM_CHANNEL_2) - { - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE); - - /* Disable the capture compare DMA Request 2 */ - __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2); - (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC2]); - } - else - { - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE); - - /* Disable the capture compare DMA Request 1 and 2 */ - __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1); - __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2); - (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]); - (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC2]); - } - - /* Disable the Peripheral */ - __HAL_TIM_DISABLE(htim); - - /* Set the TIM channel(s) state */ - if ((Channel == TIM_CHANNEL_1) || (Channel == TIM_CHANNEL_2)) - { - TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); - TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); - } - else - { - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); - } - - /* Return function status */ - return HAL_OK; -} - -/** - * @} - */ -/** @defgroup TIM_Exported_Functions_Group7 TIM IRQ handler management - * @brief TIM IRQ handler management - * -@verbatim - ============================================================================== - ##### IRQ handler management ##### - ============================================================================== - [..] - This section provides Timer IRQ handler function. - -@endverbatim - * @{ - */ -/** - * @brief This function handles TIM interrupts requests. - * @param htim TIM handle - * @retval None - */ -void HAL_TIM_IRQHandler(TIM_HandleTypeDef *htim) -{ - /* Capture compare 1 event */ - if (__HAL_TIM_GET_FLAG(htim, TIM_FLAG_CC1) != RESET) - { - if (__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_CC1) != RESET) - { - { - __HAL_TIM_CLEAR_IT(htim, TIM_IT_CC1); - htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1; - - /* Input capture event */ - if ((htim->Instance->CCMR1 & TIM_CCMR1_CC1S) != 0x00U) - { -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) - htim->IC_CaptureCallback(htim); -#else - HAL_TIM_IC_CaptureCallback(htim); -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ - } - /* Output compare event */ - else - { -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) - htim->OC_DelayElapsedCallback(htim); - htim->PWM_PulseFinishedCallback(htim); -#else - HAL_TIM_OC_DelayElapsedCallback(htim); - HAL_TIM_PWM_PulseFinishedCallback(htim); -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ - } - htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; - } - } - } - /* Capture compare 2 event */ - if (__HAL_TIM_GET_FLAG(htim, TIM_FLAG_CC2) != RESET) - { - if (__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_CC2) != RESET) - { - __HAL_TIM_CLEAR_IT(htim, TIM_IT_CC2); - htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2; - /* Input capture event */ - if ((htim->Instance->CCMR1 & TIM_CCMR1_CC2S) != 0x00U) - { -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) - htim->IC_CaptureCallback(htim); -#else - HAL_TIM_IC_CaptureCallback(htim); -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ - } - /* Output compare event */ - else - { -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) - htim->OC_DelayElapsedCallback(htim); - htim->PWM_PulseFinishedCallback(htim); -#else - HAL_TIM_OC_DelayElapsedCallback(htim); - HAL_TIM_PWM_PulseFinishedCallback(htim); -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ - } - htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; - } - } - /* Capture compare 3 event */ - if (__HAL_TIM_GET_FLAG(htim, TIM_FLAG_CC3) != RESET) - { - if (__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_CC3) != RESET) - { - __HAL_TIM_CLEAR_IT(htim, TIM_IT_CC3); - htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3; - /* Input capture event */ - if ((htim->Instance->CCMR2 & TIM_CCMR2_CC3S) != 0x00U) - { -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) - htim->IC_CaptureCallback(htim); -#else - HAL_TIM_IC_CaptureCallback(htim); -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ - } - /* Output compare event */ - else - { -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) - htim->OC_DelayElapsedCallback(htim); - htim->PWM_PulseFinishedCallback(htim); -#else - HAL_TIM_OC_DelayElapsedCallback(htim); - HAL_TIM_PWM_PulseFinishedCallback(htim); -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ - } - htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; - } - } - /* Capture compare 4 event */ - if (__HAL_TIM_GET_FLAG(htim, TIM_FLAG_CC4) != RESET) - { - if (__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_CC4) != RESET) - { - __HAL_TIM_CLEAR_IT(htim, TIM_IT_CC4); - htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4; - /* Input capture event */ - if ((htim->Instance->CCMR2 & TIM_CCMR2_CC4S) != 0x00U) - { -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) - htim->IC_CaptureCallback(htim); -#else - HAL_TIM_IC_CaptureCallback(htim); -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ - } - /* Output compare event */ - else - { -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) - htim->OC_DelayElapsedCallback(htim); - htim->PWM_PulseFinishedCallback(htim); -#else - HAL_TIM_OC_DelayElapsedCallback(htim); - HAL_TIM_PWM_PulseFinishedCallback(htim); -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ - } - htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; - } - } - /* TIM Update event */ - if (__HAL_TIM_GET_FLAG(htim, TIM_FLAG_UPDATE) != RESET) - { - if (__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_UPDATE) != RESET) - { - __HAL_TIM_CLEAR_IT(htim, TIM_IT_UPDATE); -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) - htim->PeriodElapsedCallback(htim); -#else - HAL_TIM_PeriodElapsedCallback(htim); -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ - } - } - /* TIM Break input event */ - if (__HAL_TIM_GET_FLAG(htim, TIM_FLAG_BREAK) != RESET) - { - if (__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_BREAK) != RESET) - { - __HAL_TIM_CLEAR_IT(htim, TIM_IT_BREAK); -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) - htim->BreakCallback(htim); -#else - HAL_TIMEx_BreakCallback(htim); -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ - } - } - /* TIM Break2 input event */ - if (__HAL_TIM_GET_FLAG(htim, TIM_FLAG_BREAK2) != RESET) - { - if (__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_BREAK) != RESET) - { - __HAL_TIM_CLEAR_FLAG(htim, TIM_FLAG_BREAK2); -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) - htim->Break2Callback(htim); -#else - HAL_TIMEx_Break2Callback(htim); -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ - } - } - /* TIM Trigger detection event */ - if (__HAL_TIM_GET_FLAG(htim, TIM_FLAG_TRIGGER) != RESET) - { - if (__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_TRIGGER) != RESET) - { - __HAL_TIM_CLEAR_IT(htim, TIM_IT_TRIGGER); -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) - htim->TriggerCallback(htim); -#else - HAL_TIM_TriggerCallback(htim); -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ - } - } - /* TIM commutation event */ - if (__HAL_TIM_GET_FLAG(htim, TIM_FLAG_COM) != RESET) - { - if (__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_COM) != RESET) - { - __HAL_TIM_CLEAR_IT(htim, TIM_FLAG_COM); -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) - htim->CommutationCallback(htim); -#else - HAL_TIMEx_CommutCallback(htim); -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ - } - } -} - -/** - * @} - */ - -/** @defgroup TIM_Exported_Functions_Group8 TIM Peripheral Control functions - * @brief TIM Peripheral Control functions - * -@verbatim - ============================================================================== - ##### Peripheral Control functions ##### - ============================================================================== - [..] - This section provides functions allowing to: - (+) Configure The Input Output channels for OC, PWM, IC or One Pulse mode. - (+) Configure External Clock source. - (+) Configure Complementary channels, break features and dead time. - (+) Configure Master and the Slave synchronization. - (+) Configure the DMA Burst Mode. - -@endverbatim - * @{ - */ - -/** - * @brief Initializes the TIM Output Compare Channels according to the specified - * parameters in the TIM_OC_InitTypeDef. - * @param htim TIM Output Compare handle - * @param sConfig TIM Output Compare configuration structure - * @param Channel TIM Channels to configure - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @arg TIM_CHANNEL_4: TIM Channel 4 selected - * @arg TIM_CHANNEL_5: TIM Channel 5 selected - * @arg TIM_CHANNEL_6: TIM Channel 6 selected - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_OC_ConfigChannel(TIM_HandleTypeDef *htim, - const TIM_OC_InitTypeDef *sConfig, - uint32_t Channel) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Check the parameters */ - assert_param(IS_TIM_CHANNELS(Channel)); - assert_param(IS_TIM_OC_MODE(sConfig->OCMode)); - assert_param(IS_TIM_OC_POLARITY(sConfig->OCPolarity)); - - /* Process Locked */ - __HAL_LOCK(htim); - - switch (Channel) - { - case TIM_CHANNEL_1: - { - /* Check the parameters */ - assert_param(IS_TIM_CC1_INSTANCE(htim->Instance)); - - /* Configure the TIM Channel 1 in Output Compare */ - TIM_OC1_SetConfig(htim->Instance, sConfig); - break; - } - - case TIM_CHANNEL_2: - { - /* Check the parameters */ - assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); - - /* Configure the TIM Channel 2 in Output Compare */ - TIM_OC2_SetConfig(htim->Instance, sConfig); - break; - } - - case TIM_CHANNEL_3: - { - /* Check the parameters */ - assert_param(IS_TIM_CC3_INSTANCE(htim->Instance)); - - /* Configure the TIM Channel 3 in Output Compare */ - TIM_OC3_SetConfig(htim->Instance, sConfig); - break; - } - - case TIM_CHANNEL_4: - { - /* Check the parameters */ - assert_param(IS_TIM_CC4_INSTANCE(htim->Instance)); - - /* Configure the TIM Channel 4 in Output Compare */ - TIM_OC4_SetConfig(htim->Instance, sConfig); - break; - } - - case TIM_CHANNEL_5: - { - /* Check the parameters */ - assert_param(IS_TIM_CC5_INSTANCE(htim->Instance)); - - /* Configure the TIM Channel 5 in Output Compare */ - TIM_OC5_SetConfig(htim->Instance, sConfig); - break; - } - - case TIM_CHANNEL_6: - { - /* Check the parameters */ - assert_param(IS_TIM_CC6_INSTANCE(htim->Instance)); - - /* Configure the TIM Channel 6 in Output Compare */ - TIM_OC6_SetConfig(htim->Instance, sConfig); - break; - } - - default: - status = HAL_ERROR; - break; - } - - __HAL_UNLOCK(htim); - - return status; -} - -/** - * @brief Initializes the TIM Input Capture Channels according to the specified - * parameters in the TIM_IC_InitTypeDef. - * @param htim TIM IC handle - * @param sConfig TIM Input Capture configuration structure - * @param Channel TIM Channel to configure - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @arg TIM_CHANNEL_4: TIM Channel 4 selected - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_IC_ConfigChannel(TIM_HandleTypeDef *htim, const TIM_IC_InitTypeDef *sConfig, uint32_t Channel) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Check the parameters */ - assert_param(IS_TIM_CC1_INSTANCE(htim->Instance)); - assert_param(IS_TIM_IC_POLARITY(sConfig->ICPolarity)); - assert_param(IS_TIM_IC_SELECTION(sConfig->ICSelection)); - assert_param(IS_TIM_IC_PRESCALER(sConfig->ICPrescaler)); - assert_param(IS_TIM_IC_FILTER(sConfig->ICFilter)); - - /* Process Locked */ - __HAL_LOCK(htim); - - if (Channel == TIM_CHANNEL_1) - { - /* TI1 Configuration */ - TIM_TI1_SetConfig(htim->Instance, - sConfig->ICPolarity, - sConfig->ICSelection, - sConfig->ICFilter); - - /* Reset the IC1PSC Bits */ - htim->Instance->CCMR1 &= ~TIM_CCMR1_IC1PSC; - - /* Set the IC1PSC value */ - htim->Instance->CCMR1 |= sConfig->ICPrescaler; - } - else if (Channel == TIM_CHANNEL_2) - { - /* TI2 Configuration */ - assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); - - TIM_TI2_SetConfig(htim->Instance, - sConfig->ICPolarity, - sConfig->ICSelection, - sConfig->ICFilter); - - /* Reset the IC2PSC Bits */ - htim->Instance->CCMR1 &= ~TIM_CCMR1_IC2PSC; - - /* Set the IC2PSC value */ - htim->Instance->CCMR1 |= (sConfig->ICPrescaler << 8U); - } - else if (Channel == TIM_CHANNEL_3) - { - /* TI3 Configuration */ - assert_param(IS_TIM_CC3_INSTANCE(htim->Instance)); - - TIM_TI3_SetConfig(htim->Instance, - sConfig->ICPolarity, - sConfig->ICSelection, - sConfig->ICFilter); - - /* Reset the IC3PSC Bits */ - htim->Instance->CCMR2 &= ~TIM_CCMR2_IC3PSC; - - /* Set the IC3PSC value */ - htim->Instance->CCMR2 |= sConfig->ICPrescaler; - } - else if (Channel == TIM_CHANNEL_4) - { - /* TI4 Configuration */ - assert_param(IS_TIM_CC4_INSTANCE(htim->Instance)); - - TIM_TI4_SetConfig(htim->Instance, - sConfig->ICPolarity, - sConfig->ICSelection, - sConfig->ICFilter); - - /* Reset the IC4PSC Bits */ - htim->Instance->CCMR2 &= ~TIM_CCMR2_IC4PSC; - - /* Set the IC4PSC value */ - htim->Instance->CCMR2 |= (sConfig->ICPrescaler << 8U); - } - else - { - status = HAL_ERROR; - } - - __HAL_UNLOCK(htim); - - return status; -} - -/** - * @brief Initializes the TIM PWM channels according to the specified - * parameters in the TIM_OC_InitTypeDef. - * @param htim TIM PWM handle - * @param sConfig TIM PWM configuration structure - * @param Channel TIM Channels to be configured - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @arg TIM_CHANNEL_4: TIM Channel 4 selected - * @arg TIM_CHANNEL_5: TIM Channel 5 selected - * @arg TIM_CHANNEL_6: TIM Channel 6 selected - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_PWM_ConfigChannel(TIM_HandleTypeDef *htim, - const TIM_OC_InitTypeDef *sConfig, - uint32_t Channel) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Check the parameters */ - assert_param(IS_TIM_CHANNELS(Channel)); - assert_param(IS_TIM_PWM_MODE(sConfig->OCMode)); - assert_param(IS_TIM_OC_POLARITY(sConfig->OCPolarity)); - assert_param(IS_TIM_FAST_STATE(sConfig->OCFastMode)); - - /* Process Locked */ - __HAL_LOCK(htim); - - switch (Channel) - { - case TIM_CHANNEL_1: - { - /* Check the parameters */ - assert_param(IS_TIM_CC1_INSTANCE(htim->Instance)); - - /* Configure the Channel 1 in PWM mode */ - TIM_OC1_SetConfig(htim->Instance, sConfig); - - /* Set the Preload enable bit for channel1 */ - htim->Instance->CCMR1 |= TIM_CCMR1_OC1PE; - - /* Configure the Output Fast mode */ - htim->Instance->CCMR1 &= ~TIM_CCMR1_OC1FE; - htim->Instance->CCMR1 |= sConfig->OCFastMode; - break; - } - - case TIM_CHANNEL_2: - { - /* Check the parameters */ - assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); - - /* Configure the Channel 2 in PWM mode */ - TIM_OC2_SetConfig(htim->Instance, sConfig); - - /* Set the Preload enable bit for channel2 */ - htim->Instance->CCMR1 |= TIM_CCMR1_OC2PE; - - /* Configure the Output Fast mode */ - htim->Instance->CCMR1 &= ~TIM_CCMR1_OC2FE; - htim->Instance->CCMR1 |= sConfig->OCFastMode << 8U; - break; - } - - case TIM_CHANNEL_3: - { - /* Check the parameters */ - assert_param(IS_TIM_CC3_INSTANCE(htim->Instance)); - - /* Configure the Channel 3 in PWM mode */ - TIM_OC3_SetConfig(htim->Instance, sConfig); - - /* Set the Preload enable bit for channel3 */ - htim->Instance->CCMR2 |= TIM_CCMR2_OC3PE; - - /* Configure the Output Fast mode */ - htim->Instance->CCMR2 &= ~TIM_CCMR2_OC3FE; - htim->Instance->CCMR2 |= sConfig->OCFastMode; - break; - } - - case TIM_CHANNEL_4: - { - /* Check the parameters */ - assert_param(IS_TIM_CC4_INSTANCE(htim->Instance)); - - /* Configure the Channel 4 in PWM mode */ - TIM_OC4_SetConfig(htim->Instance, sConfig); - - /* Set the Preload enable bit for channel4 */ - htim->Instance->CCMR2 |= TIM_CCMR2_OC4PE; - - /* Configure the Output Fast mode */ - htim->Instance->CCMR2 &= ~TIM_CCMR2_OC4FE; - htim->Instance->CCMR2 |= sConfig->OCFastMode << 8U; - break; - } - - case TIM_CHANNEL_5: - { - /* Check the parameters */ - assert_param(IS_TIM_CC5_INSTANCE(htim->Instance)); - - /* Configure the Channel 5 in PWM mode */ - TIM_OC5_SetConfig(htim->Instance, sConfig); - - /* Set the Preload enable bit for channel5*/ - htim->Instance->CCMR3 |= TIM_CCMR3_OC5PE; - - /* Configure the Output Fast mode */ - htim->Instance->CCMR3 &= ~TIM_CCMR3_OC5FE; - htim->Instance->CCMR3 |= sConfig->OCFastMode; - break; - } - - case TIM_CHANNEL_6: - { - /* Check the parameters */ - assert_param(IS_TIM_CC6_INSTANCE(htim->Instance)); - - /* Configure the Channel 6 in PWM mode */ - TIM_OC6_SetConfig(htim->Instance, sConfig); - - /* Set the Preload enable bit for channel6 */ - htim->Instance->CCMR3 |= TIM_CCMR3_OC6PE; - - /* Configure the Output Fast mode */ - htim->Instance->CCMR3 &= ~TIM_CCMR3_OC6FE; - htim->Instance->CCMR3 |= sConfig->OCFastMode << 8U; - break; - } - - default: - status = HAL_ERROR; - break; - } - - __HAL_UNLOCK(htim); - - return status; -} - -/** - * @brief Initializes the TIM One Pulse Channels according to the specified - * parameters in the TIM_OnePulse_InitTypeDef. - * @param htim TIM One Pulse handle - * @param sConfig TIM One Pulse configuration structure - * @param OutputChannel TIM output channel to configure - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @param InputChannel TIM input Channel to configure - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @note To output a waveform with a minimum delay user can enable the fast - * mode by calling the @ref __HAL_TIM_ENABLE_OCxFAST macro. Then CCx - * output is forced in response to the edge detection on TIx input, - * without taking in account the comparison. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_OnePulse_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OnePulse_InitTypeDef *sConfig, - uint32_t OutputChannel, uint32_t InputChannel) -{ - HAL_StatusTypeDef status = HAL_OK; - TIM_OC_InitTypeDef temp1; - - /* Check the parameters */ - assert_param(IS_TIM_OPM_CHANNELS(OutputChannel)); - assert_param(IS_TIM_OPM_CHANNELS(InputChannel)); - - if (OutputChannel != InputChannel) - { - /* Process Locked */ - __HAL_LOCK(htim); - - htim->State = HAL_TIM_STATE_BUSY; - - /* Extract the Output compare configuration from sConfig structure */ - temp1.OCMode = sConfig->OCMode; - temp1.Pulse = sConfig->Pulse; - temp1.OCPolarity = sConfig->OCPolarity; - temp1.OCNPolarity = sConfig->OCNPolarity; - temp1.OCIdleState = sConfig->OCIdleState; - temp1.OCNIdleState = sConfig->OCNIdleState; - - switch (OutputChannel) - { - case TIM_CHANNEL_1: - { - assert_param(IS_TIM_CC1_INSTANCE(htim->Instance)); - - TIM_OC1_SetConfig(htim->Instance, &temp1); - break; - } - - case TIM_CHANNEL_2: - { - assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); - - TIM_OC2_SetConfig(htim->Instance, &temp1); - break; - } - - default: - status = HAL_ERROR; - break; - } - - if (status == HAL_OK) - { - switch (InputChannel) - { - case TIM_CHANNEL_1: - { - assert_param(IS_TIM_CC1_INSTANCE(htim->Instance)); - - TIM_TI1_SetConfig(htim->Instance, sConfig->ICPolarity, - sConfig->ICSelection, sConfig->ICFilter); - - /* Reset the IC1PSC Bits */ - htim->Instance->CCMR1 &= ~TIM_CCMR1_IC1PSC; - - /* Select the Trigger source */ - htim->Instance->SMCR &= ~TIM_SMCR_TS; - htim->Instance->SMCR |= TIM_TS_TI1FP1; - - /* Select the Slave Mode */ - htim->Instance->SMCR &= ~TIM_SMCR_SMS; - htim->Instance->SMCR |= TIM_SLAVEMODE_TRIGGER; - break; - } - - case TIM_CHANNEL_2: - { - assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); - - TIM_TI2_SetConfig(htim->Instance, sConfig->ICPolarity, - sConfig->ICSelection, sConfig->ICFilter); - - /* Reset the IC2PSC Bits */ - htim->Instance->CCMR1 &= ~TIM_CCMR1_IC2PSC; - - /* Select the Trigger source */ - htim->Instance->SMCR &= ~TIM_SMCR_TS; - htim->Instance->SMCR |= TIM_TS_TI2FP2; - - /* Select the Slave Mode */ - htim->Instance->SMCR &= ~TIM_SMCR_SMS; - htim->Instance->SMCR |= TIM_SLAVEMODE_TRIGGER; - break; - } - - default: - status = HAL_ERROR; - break; - } - } - - htim->State = HAL_TIM_STATE_READY; - - __HAL_UNLOCK(htim); - - return status; - } - else - { - return HAL_ERROR; - } -} - -/** - * @brief Configure the DMA Burst to transfer Data from the memory to the TIM peripheral - * @param htim TIM handle - * @param BurstBaseAddress TIM Base address from where the DMA will start the Data write - * This parameter can be one of the following values: - * @arg TIM_DMABASE_CR1 - * @arg TIM_DMABASE_CR2 - * @arg TIM_DMABASE_SMCR - * @arg TIM_DMABASE_DIER - * @arg TIM_DMABASE_SR - * @arg TIM_DMABASE_EGR - * @arg TIM_DMABASE_CCMR1 - * @arg TIM_DMABASE_CCMR2 - * @arg TIM_DMABASE_CCER - * @arg TIM_DMABASE_CNT - * @arg TIM_DMABASE_PSC - * @arg TIM_DMABASE_ARR - * @arg TIM_DMABASE_RCR - * @arg TIM_DMABASE_CCR1 - * @arg TIM_DMABASE_CCR2 - * @arg TIM_DMABASE_CCR3 - * @arg TIM_DMABASE_CCR4 - * @arg TIM_DMABASE_BDTR - * @arg TIM_DMABASE_OR1 - * @arg TIM_DMABASE_CCMR3 - * @arg TIM_DMABASE_CCR5 - * @arg TIM_DMABASE_CCR6 - * @arg TIM_DMABASE_OR2 - * @arg TIM_DMABASE_OR3 - * @param BurstRequestSrc TIM DMA Request sources - * This parameter can be one of the following values: - * @arg TIM_DMA_UPDATE: TIM update Interrupt source - * @arg TIM_DMA_CC1: TIM Capture Compare 1 DMA source - * @arg TIM_DMA_CC2: TIM Capture Compare 2 DMA source - * @arg TIM_DMA_CC3: TIM Capture Compare 3 DMA source - * @arg TIM_DMA_CC4: TIM Capture Compare 4 DMA source - * @arg TIM_DMA_COM: TIM Commutation DMA source - * @arg TIM_DMA_TRIGGER: TIM Trigger DMA source - * @param BurstBuffer The Buffer address. - * @param BurstLength DMA Burst length. This parameter can be one value - * between: TIM_DMABURSTLENGTH_1TRANSFER and TIM_DMABURSTLENGTH_18TRANSFERS. - * @note This function should be used only when BurstLength is equal to DMA data transfer length. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, - uint32_t BurstRequestSrc, const uint32_t *BurstBuffer, uint32_t BurstLength) -{ - HAL_StatusTypeDef status; - - status = HAL_TIM_DMABurst_MultiWriteStart(htim, BurstBaseAddress, BurstRequestSrc, BurstBuffer, BurstLength, - ((BurstLength) >> 8U) + 1U); - - - - return status; -} - -/** - * @brief Configure the DMA Burst to transfer multiple Data from the memory to the TIM peripheral - * @param htim TIM handle - * @param BurstBaseAddress TIM Base address from where the DMA will start the Data write - * This parameter can be one of the following values: - * @arg TIM_DMABASE_CR1 - * @arg TIM_DMABASE_CR2 - * @arg TIM_DMABASE_SMCR - * @arg TIM_DMABASE_DIER - * @arg TIM_DMABASE_SR - * @arg TIM_DMABASE_EGR - * @arg TIM_DMABASE_CCMR1 - * @arg TIM_DMABASE_CCMR2 - * @arg TIM_DMABASE_CCER - * @arg TIM_DMABASE_CNT - * @arg TIM_DMABASE_PSC - * @arg TIM_DMABASE_ARR - * @arg TIM_DMABASE_RCR - * @arg TIM_DMABASE_CCR1 - * @arg TIM_DMABASE_CCR2 - * @arg TIM_DMABASE_CCR3 - * @arg TIM_DMABASE_CCR4 - * @arg TIM_DMABASE_BDTR - * @arg TIM_DMABASE_OR1 - * @arg TIM_DMABASE_CCMR3 - * @arg TIM_DMABASE_CCR5 - * @arg TIM_DMABASE_CCR6 - * @arg TIM_DMABASE_OR2 - * @arg TIM_DMABASE_OR3 - * @param BurstRequestSrc TIM DMA Request sources - * This parameter can be one of the following values: - * @arg TIM_DMA_UPDATE: TIM update Interrupt source - * @arg TIM_DMA_CC1: TIM Capture Compare 1 DMA source - * @arg TIM_DMA_CC2: TIM Capture Compare 2 DMA source - * @arg TIM_DMA_CC3: TIM Capture Compare 3 DMA source - * @arg TIM_DMA_CC4: TIM Capture Compare 4 DMA source - * @arg TIM_DMA_COM: TIM Commutation DMA source - * @arg TIM_DMA_TRIGGER: TIM Trigger DMA source - * @param BurstBuffer The Buffer address. - * @param BurstLength DMA Burst length. This parameter can be one value - * between: TIM_DMABURSTLENGTH_1TRANSFER and TIM_DMABURSTLENGTH_18TRANSFERS. - * @param DataLength Data length. This parameter can be one value - * between 1 and 0xFFFF. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_DMABurst_MultiWriteStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, - uint32_t BurstRequestSrc, const uint32_t *BurstBuffer, - uint32_t BurstLength, uint32_t DataLength) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Check the parameters */ - assert_param(IS_TIM_DMABURST_INSTANCE(htim->Instance)); - assert_param(IS_TIM_DMA_BASE(BurstBaseAddress)); - assert_param(IS_TIM_DMA_SOURCE(BurstRequestSrc)); - assert_param(IS_TIM_DMA_LENGTH(BurstLength)); - assert_param(IS_TIM_DMA_DATA_LENGTH(DataLength)); - - if (htim->DMABurstState == HAL_DMA_BURST_STATE_BUSY) - { - return HAL_BUSY; - } - else if (htim->DMABurstState == HAL_DMA_BURST_STATE_READY) - { - if ((BurstBuffer == NULL) && (BurstLength > 0U)) - { - return HAL_ERROR; - } - else - { - htim->DMABurstState = HAL_DMA_BURST_STATE_BUSY; - } - } - else - { - /* nothing to do */ - } - - switch (BurstRequestSrc) - { - case TIM_DMA_UPDATE: - { - /* Set the DMA Period elapsed callbacks */ - htim->hdma[TIM_DMA_ID_UPDATE]->XferCpltCallback = TIM_DMAPeriodElapsedCplt; - htim->hdma[TIM_DMA_ID_UPDATE]->XferHalfCpltCallback = TIM_DMAPeriodElapsedHalfCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_UPDATE]->XferErrorCallback = TIM_DMAError ; - - /* Enable the DMA channel */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_UPDATE], (uint32_t)BurstBuffer, - (uint32_t)&htim->Instance->DMAR, DataLength) != HAL_OK) - { - /* Return error status */ - return HAL_ERROR; - } - break; - } - case TIM_DMA_CC1: - { - /* Set the DMA compare callbacks */ - htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMADelayPulseCplt; - htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ; - - /* Enable the DMA channel */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)BurstBuffer, - (uint32_t)&htim->Instance->DMAR, DataLength) != HAL_OK) - { - /* Return error status */ - return HAL_ERROR; - } - break; - } - case TIM_DMA_CC2: - { - /* Set the DMA compare callbacks */ - htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMADelayPulseCplt; - htim->hdma[TIM_DMA_ID_CC2]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ; - - /* Enable the DMA channel */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)BurstBuffer, - (uint32_t)&htim->Instance->DMAR, DataLength) != HAL_OK) - { - /* Return error status */ - return HAL_ERROR; - } - break; - } - case TIM_DMA_CC3: - { - /* Set the DMA compare callbacks */ - htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMADelayPulseCplt; - htim->hdma[TIM_DMA_ID_CC3]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ; - - /* Enable the DMA channel */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)BurstBuffer, - (uint32_t)&htim->Instance->DMAR, DataLength) != HAL_OK) - { - /* Return error status */ - return HAL_ERROR; - } - break; - } - case TIM_DMA_CC4: - { - /* Set the DMA compare callbacks */ - htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = TIM_DMADelayPulseCplt; - htim->hdma[TIM_DMA_ID_CC4]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ; - - /* Enable the DMA channel */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)BurstBuffer, - (uint32_t)&htim->Instance->DMAR, DataLength) != HAL_OK) - { - /* Return error status */ - return HAL_ERROR; - } - break; - } - case TIM_DMA_COM: - { - /* Set the DMA commutation callbacks */ - htim->hdma[TIM_DMA_ID_COMMUTATION]->XferCpltCallback = TIMEx_DMACommutationCplt; - htim->hdma[TIM_DMA_ID_COMMUTATION]->XferHalfCpltCallback = TIMEx_DMACommutationHalfCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_COMMUTATION]->XferErrorCallback = TIM_DMAError ; - - /* Enable the DMA channel */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_COMMUTATION], (uint32_t)BurstBuffer, - (uint32_t)&htim->Instance->DMAR, DataLength) != HAL_OK) - { - /* Return error status */ - return HAL_ERROR; - } - break; - } - case TIM_DMA_TRIGGER: - { - /* Set the DMA trigger callbacks */ - htim->hdma[TIM_DMA_ID_TRIGGER]->XferCpltCallback = TIM_DMATriggerCplt; - htim->hdma[TIM_DMA_ID_TRIGGER]->XferHalfCpltCallback = TIM_DMATriggerHalfCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_TRIGGER]->XferErrorCallback = TIM_DMAError ; - - /* Enable the DMA channel */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_TRIGGER], (uint32_t)BurstBuffer, - (uint32_t)&htim->Instance->DMAR, DataLength) != HAL_OK) - { - /* Return error status */ - return HAL_ERROR; - } - break; - } - default: - status = HAL_ERROR; - break; - } - - if (status == HAL_OK) - { - /* Configure the DMA Burst Mode */ - htim->Instance->DCR = (BurstBaseAddress | BurstLength); - /* Enable the TIM DMA Request */ - __HAL_TIM_ENABLE_DMA(htim, BurstRequestSrc); - } - - /* Return function status */ - return status; -} - -/** - * @brief Stops the TIM DMA Burst mode - * @param htim TIM handle - * @param BurstRequestSrc TIM DMA Request sources to disable - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStop(TIM_HandleTypeDef *htim, uint32_t BurstRequestSrc) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Check the parameters */ - assert_param(IS_TIM_DMA_SOURCE(BurstRequestSrc)); - - /* Abort the DMA transfer (at least disable the DMA channel) */ - switch (BurstRequestSrc) - { - case TIM_DMA_UPDATE: - { - (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_UPDATE]); - break; - } - case TIM_DMA_CC1: - { - (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]); - break; - } - case TIM_DMA_CC2: - { - (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC2]); - break; - } - case TIM_DMA_CC3: - { - (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC3]); - break; - } - case TIM_DMA_CC4: - { - (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC4]); - break; - } - case TIM_DMA_COM: - { - (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_COMMUTATION]); - break; - } - case TIM_DMA_TRIGGER: - { - (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_TRIGGER]); - break; - } - default: - status = HAL_ERROR; - break; - } - - if (status == HAL_OK) - { - /* Disable the TIM Update DMA request */ - __HAL_TIM_DISABLE_DMA(htim, BurstRequestSrc); - - /* Change the DMA burst operation state */ - htim->DMABurstState = HAL_DMA_BURST_STATE_READY; - } - - /* Return function status */ - return status; -} - -/** - * @brief Configure the DMA Burst to transfer Data from the TIM peripheral to the memory - * @param htim TIM handle - * @param BurstBaseAddress TIM Base address from where the DMA will start the Data read - * This parameter can be one of the following values: - * @arg TIM_DMABASE_CR1 - * @arg TIM_DMABASE_CR2 - * @arg TIM_DMABASE_SMCR - * @arg TIM_DMABASE_DIER - * @arg TIM_DMABASE_SR - * @arg TIM_DMABASE_EGR - * @arg TIM_DMABASE_CCMR1 - * @arg TIM_DMABASE_CCMR2 - * @arg TIM_DMABASE_CCER - * @arg TIM_DMABASE_CNT - * @arg TIM_DMABASE_PSC - * @arg TIM_DMABASE_ARR - * @arg TIM_DMABASE_RCR - * @arg TIM_DMABASE_CCR1 - * @arg TIM_DMABASE_CCR2 - * @arg TIM_DMABASE_CCR3 - * @arg TIM_DMABASE_CCR4 - * @arg TIM_DMABASE_BDTR - * @arg TIM_DMABASE_OR1 - * @arg TIM_DMABASE_CCMR3 - * @arg TIM_DMABASE_CCR5 - * @arg TIM_DMABASE_CCR6 - * @arg TIM_DMABASE_OR2 - * @arg TIM_DMABASE_OR3 - * @param BurstRequestSrc TIM DMA Request sources - * This parameter can be one of the following values: - * @arg TIM_DMA_UPDATE: TIM update Interrupt source - * @arg TIM_DMA_CC1: TIM Capture Compare 1 DMA source - * @arg TIM_DMA_CC2: TIM Capture Compare 2 DMA source - * @arg TIM_DMA_CC3: TIM Capture Compare 3 DMA source - * @arg TIM_DMA_CC4: TIM Capture Compare 4 DMA source - * @arg TIM_DMA_COM: TIM Commutation DMA source - * @arg TIM_DMA_TRIGGER: TIM Trigger DMA source - * @param BurstBuffer The Buffer address. - * @param BurstLength DMA Burst length. This parameter can be one value - * between: TIM_DMABURSTLENGTH_1TRANSFER and TIM_DMABURSTLENGTH_18TRANSFERS. - * @note This function should be used only when BurstLength is equal to DMA data transfer length. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, - uint32_t BurstRequestSrc, uint32_t *BurstBuffer, uint32_t BurstLength) -{ - HAL_StatusTypeDef status; - - status = HAL_TIM_DMABurst_MultiReadStart(htim, BurstBaseAddress, BurstRequestSrc, BurstBuffer, BurstLength, - ((BurstLength) >> 8U) + 1U); - - - return status; -} - -/** - * @brief Configure the DMA Burst to transfer Data from the TIM peripheral to the memory - * @param htim TIM handle - * @param BurstBaseAddress TIM Base address from where the DMA will start the Data read - * This parameter can be one of the following values: - * @arg TIM_DMABASE_CR1 - * @arg TIM_DMABASE_CR2 - * @arg TIM_DMABASE_SMCR - * @arg TIM_DMABASE_DIER - * @arg TIM_DMABASE_SR - * @arg TIM_DMABASE_EGR - * @arg TIM_DMABASE_CCMR1 - * @arg TIM_DMABASE_CCMR2 - * @arg TIM_DMABASE_CCER - * @arg TIM_DMABASE_CNT - * @arg TIM_DMABASE_PSC - * @arg TIM_DMABASE_ARR - * @arg TIM_DMABASE_RCR - * @arg TIM_DMABASE_CCR1 - * @arg TIM_DMABASE_CCR2 - * @arg TIM_DMABASE_CCR3 - * @arg TIM_DMABASE_CCR4 - * @arg TIM_DMABASE_BDTR - * @arg TIM_DMABASE_OR1 - * @arg TIM_DMABASE_CCMR3 - * @arg TIM_DMABASE_CCR5 - * @arg TIM_DMABASE_CCR6 - * @arg TIM_DMABASE_OR2 - * @arg TIM_DMABASE_OR3 - * @param BurstRequestSrc TIM DMA Request sources - * This parameter can be one of the following values: - * @arg TIM_DMA_UPDATE: TIM update Interrupt source - * @arg TIM_DMA_CC1: TIM Capture Compare 1 DMA source - * @arg TIM_DMA_CC2: TIM Capture Compare 2 DMA source - * @arg TIM_DMA_CC3: TIM Capture Compare 3 DMA source - * @arg TIM_DMA_CC4: TIM Capture Compare 4 DMA source - * @arg TIM_DMA_COM: TIM Commutation DMA source - * @arg TIM_DMA_TRIGGER: TIM Trigger DMA source - * @param BurstBuffer The Buffer address. - * @param BurstLength DMA Burst length. This parameter can be one value - * between: TIM_DMABURSTLENGTH_1TRANSFER and TIM_DMABURSTLENGTH_18TRANSFERS. - * @param DataLength Data length. This parameter can be one value - * between 1 and 0xFFFF. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_DMABurst_MultiReadStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, - uint32_t BurstRequestSrc, uint32_t *BurstBuffer, - uint32_t BurstLength, uint32_t DataLength) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Check the parameters */ - assert_param(IS_TIM_DMABURST_INSTANCE(htim->Instance)); - assert_param(IS_TIM_DMA_BASE(BurstBaseAddress)); - assert_param(IS_TIM_DMA_SOURCE(BurstRequestSrc)); - assert_param(IS_TIM_DMA_LENGTH(BurstLength)); - assert_param(IS_TIM_DMA_DATA_LENGTH(DataLength)); - - if (htim->DMABurstState == HAL_DMA_BURST_STATE_BUSY) - { - return HAL_BUSY; - } - else if (htim->DMABurstState == HAL_DMA_BURST_STATE_READY) - { - if ((BurstBuffer == NULL) && (BurstLength > 0U)) - { - return HAL_ERROR; - } - else - { - htim->DMABurstState = HAL_DMA_BURST_STATE_BUSY; - } - } - else - { - /* nothing to do */ - } - switch (BurstRequestSrc) - { - case TIM_DMA_UPDATE: - { - /* Set the DMA Period elapsed callbacks */ - htim->hdma[TIM_DMA_ID_UPDATE]->XferCpltCallback = TIM_DMAPeriodElapsedCplt; - htim->hdma[TIM_DMA_ID_UPDATE]->XferHalfCpltCallback = TIM_DMAPeriodElapsedHalfCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_UPDATE]->XferErrorCallback = TIM_DMAError ; - - /* Enable the DMA channel */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_UPDATE], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, - DataLength) != HAL_OK) - { - /* Return error status */ - return HAL_ERROR; - } - break; - } - case TIM_DMA_CC1: - { - /* Set the DMA capture callbacks */ - htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMACaptureCplt; - htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ; - - /* Enable the DMA channel */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, - DataLength) != HAL_OK) - { - /* Return error status */ - return HAL_ERROR; - } - break; - } - case TIM_DMA_CC2: - { - /* Set the DMA capture callbacks */ - htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMACaptureCplt; - htim->hdma[TIM_DMA_ID_CC2]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ; - - /* Enable the DMA channel */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, - DataLength) != HAL_OK) - { - /* Return error status */ - return HAL_ERROR; - } - break; - } - case TIM_DMA_CC3: - { - /* Set the DMA capture callbacks */ - htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMACaptureCplt; - htim->hdma[TIM_DMA_ID_CC3]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ; - - /* Enable the DMA channel */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, - DataLength) != HAL_OK) - { - /* Return error status */ - return HAL_ERROR; - } - break; - } - case TIM_DMA_CC4: - { - /* Set the DMA capture callbacks */ - htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = TIM_DMACaptureCplt; - htim->hdma[TIM_DMA_ID_CC4]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ; - - /* Enable the DMA channel */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, - DataLength) != HAL_OK) - { - /* Return error status */ - return HAL_ERROR; - } - break; - } - case TIM_DMA_COM: - { - /* Set the DMA commutation callbacks */ - htim->hdma[TIM_DMA_ID_COMMUTATION]->XferCpltCallback = TIMEx_DMACommutationCplt; - htim->hdma[TIM_DMA_ID_COMMUTATION]->XferHalfCpltCallback = TIMEx_DMACommutationHalfCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_COMMUTATION]->XferErrorCallback = TIM_DMAError ; - - /* Enable the DMA channel */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_COMMUTATION], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, - DataLength) != HAL_OK) - { - /* Return error status */ - return HAL_ERROR; - } - break; - } - case TIM_DMA_TRIGGER: - { - /* Set the DMA trigger callbacks */ - htim->hdma[TIM_DMA_ID_TRIGGER]->XferCpltCallback = TIM_DMATriggerCplt; - htim->hdma[TIM_DMA_ID_TRIGGER]->XferHalfCpltCallback = TIM_DMATriggerHalfCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_TRIGGER]->XferErrorCallback = TIM_DMAError ; - - /* Enable the DMA channel */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_TRIGGER], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, - DataLength) != HAL_OK) - { - /* Return error status */ - return HAL_ERROR; - } - break; - } - default: - status = HAL_ERROR; - break; - } - - if (status == HAL_OK) - { - /* Configure the DMA Burst Mode */ - htim->Instance->DCR = (BurstBaseAddress | BurstLength); - - /* Enable the TIM DMA Request */ - __HAL_TIM_ENABLE_DMA(htim, BurstRequestSrc); - } - - /* Return function status */ - return status; -} - -/** - * @brief Stop the DMA burst reading - * @param htim TIM handle - * @param BurstRequestSrc TIM DMA Request sources to disable. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStop(TIM_HandleTypeDef *htim, uint32_t BurstRequestSrc) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Check the parameters */ - assert_param(IS_TIM_DMA_SOURCE(BurstRequestSrc)); - - /* Abort the DMA transfer (at least disable the DMA channel) */ - switch (BurstRequestSrc) - { - case TIM_DMA_UPDATE: - { - (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_UPDATE]); - break; - } - case TIM_DMA_CC1: - { - (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]); - break; - } - case TIM_DMA_CC2: - { - (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC2]); - break; - } - case TIM_DMA_CC3: - { - (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC3]); - break; - } - case TIM_DMA_CC4: - { - (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC4]); - break; - } - case TIM_DMA_COM: - { - (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_COMMUTATION]); - break; - } - case TIM_DMA_TRIGGER: - { - (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_TRIGGER]); - break; - } - default: - status = HAL_ERROR; - break; - } - - if (status == HAL_OK) - { - /* Disable the TIM Update DMA request */ - __HAL_TIM_DISABLE_DMA(htim, BurstRequestSrc); - - /* Change the DMA burst operation state */ - htim->DMABurstState = HAL_DMA_BURST_STATE_READY; - } - - /* Return function status */ - return status; -} - -/** - * @brief Generate a software event - * @param htim TIM handle - * @param EventSource specifies the event source. - * This parameter can be one of the following values: - * @arg TIM_EVENTSOURCE_UPDATE: Timer update Event source - * @arg TIM_EVENTSOURCE_CC1: Timer Capture Compare 1 Event source - * @arg TIM_EVENTSOURCE_CC2: Timer Capture Compare 2 Event source - * @arg TIM_EVENTSOURCE_CC3: Timer Capture Compare 3 Event source - * @arg TIM_EVENTSOURCE_CC4: Timer Capture Compare 4 Event source - * @arg TIM_EVENTSOURCE_COM: Timer COM event source - * @arg TIM_EVENTSOURCE_TRIGGER: Timer Trigger Event source - * @arg TIM_EVENTSOURCE_BREAK: Timer Break event source - * @arg TIM_EVENTSOURCE_BREAK2: Timer Break2 event source - * @note Basic timers can only generate an update event. - * @note TIM_EVENTSOURCE_COM is relevant only with advanced timer instances. - * @note TIM_EVENTSOURCE_BREAK and TIM_EVENTSOURCE_BREAK2 are relevant - * only for timer instances supporting break input(s). - * @retval HAL status - */ - -HAL_StatusTypeDef HAL_TIM_GenerateEvent(TIM_HandleTypeDef *htim, uint32_t EventSource) -{ - /* Check the parameters */ - assert_param(IS_TIM_INSTANCE(htim->Instance)); - assert_param(IS_TIM_EVENT_SOURCE(EventSource)); - - /* Process Locked */ - __HAL_LOCK(htim); - - /* Change the TIM state */ - htim->State = HAL_TIM_STATE_BUSY; - - /* Set the event sources */ - htim->Instance->EGR = EventSource; - - /* Change the TIM state */ - htim->State = HAL_TIM_STATE_READY; - - __HAL_UNLOCK(htim); - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Configures the OCRef clear feature - * @param htim TIM handle - * @param sClearInputConfig pointer to a TIM_ClearInputConfigTypeDef structure that - * contains the OCREF clear feature and parameters for the TIM peripheral. - * @param Channel specifies the TIM Channel - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 - * @arg TIM_CHANNEL_2: TIM Channel 2 - * @arg TIM_CHANNEL_3: TIM Channel 3 - * @arg TIM_CHANNEL_4: TIM Channel 4 - * @arg TIM_CHANNEL_5: TIM Channel 5 - * @arg TIM_CHANNEL_6: TIM Channel 6 - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_ConfigOCrefClear(TIM_HandleTypeDef *htim, - const TIM_ClearInputConfigTypeDef *sClearInputConfig, - uint32_t Channel) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Check the parameters */ - assert_param(IS_TIM_OCXREF_CLEAR_INSTANCE(htim->Instance)); - assert_param(IS_TIM_CLEARINPUT_SOURCE(sClearInputConfig->ClearInputSource)); - - /* Process Locked */ - __HAL_LOCK(htim); - - htim->State = HAL_TIM_STATE_BUSY; - - switch (sClearInputConfig->ClearInputSource) - { - case TIM_CLEARINPUTSOURCE_NONE: - { - /* Clear the OCREF clear selection bit and the the ETR Bits */ - CLEAR_BIT(htim->Instance->SMCR, (TIM_SMCR_OCCS | TIM_SMCR_ETF | TIM_SMCR_ETPS | TIM_SMCR_ECE | TIM_SMCR_ETP)); - break; - } - case TIM_CLEARINPUTSOURCE_OCREFCLR: - { - /* Clear the OCREF clear selection bit */ - CLEAR_BIT(htim->Instance->SMCR, TIM_SMCR_OCCS); - break; - } - - case TIM_CLEARINPUTSOURCE_ETR: - { - /* Check the parameters */ - assert_param(IS_TIM_CLEARINPUT_POLARITY(sClearInputConfig->ClearInputPolarity)); - assert_param(IS_TIM_CLEARINPUT_PRESCALER(sClearInputConfig->ClearInputPrescaler)); - assert_param(IS_TIM_CLEARINPUT_FILTER(sClearInputConfig->ClearInputFilter)); - - /* When OCRef clear feature is used with ETR source, ETR prescaler must be off */ - if (sClearInputConfig->ClearInputPrescaler != TIM_CLEARINPUTPRESCALER_DIV1) - { - htim->State = HAL_TIM_STATE_READY; - __HAL_UNLOCK(htim); - return HAL_ERROR; - } - - TIM_ETR_SetConfig(htim->Instance, - sClearInputConfig->ClearInputPrescaler, - sClearInputConfig->ClearInputPolarity, - sClearInputConfig->ClearInputFilter); - - /* Set the OCREF clear selection bit */ - SET_BIT(htim->Instance->SMCR, TIM_SMCR_OCCS); - break; - } - - default: - status = HAL_ERROR; - break; - } - - if (status == HAL_OK) - { - switch (Channel) - { - case TIM_CHANNEL_1: - { - if (sClearInputConfig->ClearInputState != (uint32_t)DISABLE) - { - /* Enable the OCREF clear feature for Channel 1 */ - SET_BIT(htim->Instance->CCMR1, TIM_CCMR1_OC1CE); - } - else - { - /* Disable the OCREF clear feature for Channel 1 */ - CLEAR_BIT(htim->Instance->CCMR1, TIM_CCMR1_OC1CE); - } - break; - } - case TIM_CHANNEL_2: - { - if (sClearInputConfig->ClearInputState != (uint32_t)DISABLE) - { - /* Enable the OCREF clear feature for Channel 2 */ - SET_BIT(htim->Instance->CCMR1, TIM_CCMR1_OC2CE); - } - else - { - /* Disable the OCREF clear feature for Channel 2 */ - CLEAR_BIT(htim->Instance->CCMR1, TIM_CCMR1_OC2CE); - } - break; - } - case TIM_CHANNEL_3: - { - if (sClearInputConfig->ClearInputState != (uint32_t)DISABLE) - { - /* Enable the OCREF clear feature for Channel 3 */ - SET_BIT(htim->Instance->CCMR2, TIM_CCMR2_OC3CE); - } - else - { - /* Disable the OCREF clear feature for Channel 3 */ - CLEAR_BIT(htim->Instance->CCMR2, TIM_CCMR2_OC3CE); - } - break; - } - case TIM_CHANNEL_4: - { - if (sClearInputConfig->ClearInputState != (uint32_t)DISABLE) - { - /* Enable the OCREF clear feature for Channel 4 */ - SET_BIT(htim->Instance->CCMR2, TIM_CCMR2_OC4CE); - } - else - { - /* Disable the OCREF clear feature for Channel 4 */ - CLEAR_BIT(htim->Instance->CCMR2, TIM_CCMR2_OC4CE); - } - break; - } - case TIM_CHANNEL_5: - { - if (sClearInputConfig->ClearInputState != (uint32_t)DISABLE) - { - /* Enable the OCREF clear feature for Channel 5 */ - SET_BIT(htim->Instance->CCMR3, TIM_CCMR3_OC5CE); - } - else - { - /* Disable the OCREF clear feature for Channel 5 */ - CLEAR_BIT(htim->Instance->CCMR3, TIM_CCMR3_OC5CE); - } - break; - } - case TIM_CHANNEL_6: - { - if (sClearInputConfig->ClearInputState != (uint32_t)DISABLE) - { - /* Enable the OCREF clear feature for Channel 6 */ - SET_BIT(htim->Instance->CCMR3, TIM_CCMR3_OC6CE); - } - else - { - /* Disable the OCREF clear feature for Channel 6 */ - CLEAR_BIT(htim->Instance->CCMR3, TIM_CCMR3_OC6CE); - } - break; - } - default: - break; - } - } - - htim->State = HAL_TIM_STATE_READY; - - __HAL_UNLOCK(htim); - - return status; -} - -/** - * @brief Configures the clock source to be used - * @param htim TIM handle - * @param sClockSourceConfig pointer to a TIM_ClockConfigTypeDef structure that - * contains the clock source information for the TIM peripheral. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_ConfigClockSource(TIM_HandleTypeDef *htim, const TIM_ClockConfigTypeDef *sClockSourceConfig) -{ - HAL_StatusTypeDef status = HAL_OK; - uint32_t tmpsmcr; - - /* Process Locked */ - __HAL_LOCK(htim); - - htim->State = HAL_TIM_STATE_BUSY; - - /* Check the parameters */ - assert_param(IS_TIM_CLOCKSOURCE(sClockSourceConfig->ClockSource)); - - /* Reset the SMS, TS, ECE, ETPS and ETRF bits */ - tmpsmcr = htim->Instance->SMCR; - tmpsmcr &= ~(TIM_SMCR_SMS | TIM_SMCR_TS); - tmpsmcr &= ~(TIM_SMCR_ETF | TIM_SMCR_ETPS | TIM_SMCR_ECE | TIM_SMCR_ETP); - htim->Instance->SMCR = tmpsmcr; - - switch (sClockSourceConfig->ClockSource) - { - case TIM_CLOCKSOURCE_INTERNAL: - { - assert_param(IS_TIM_INSTANCE(htim->Instance)); - break; - } - - case TIM_CLOCKSOURCE_ETRMODE1: - { - /* Check whether or not the timer instance supports external trigger input mode 1 (ETRF)*/ - assert_param(IS_TIM_CLOCKSOURCE_ETRMODE1_INSTANCE(htim->Instance)); - - /* Check ETR input conditioning related parameters */ - assert_param(IS_TIM_CLOCKPRESCALER(sClockSourceConfig->ClockPrescaler)); - assert_param(IS_TIM_CLOCKPOLARITY(sClockSourceConfig->ClockPolarity)); - assert_param(IS_TIM_CLOCKFILTER(sClockSourceConfig->ClockFilter)); - - /* Configure the ETR Clock source */ - TIM_ETR_SetConfig(htim->Instance, - sClockSourceConfig->ClockPrescaler, - sClockSourceConfig->ClockPolarity, - sClockSourceConfig->ClockFilter); - - /* Select the External clock mode1 and the ETRF trigger */ - tmpsmcr = htim->Instance->SMCR; - tmpsmcr |= (TIM_SLAVEMODE_EXTERNAL1 | TIM_CLOCKSOURCE_ETRMODE1); - /* Write to TIMx SMCR */ - htim->Instance->SMCR = tmpsmcr; - break; - } - - case TIM_CLOCKSOURCE_ETRMODE2: - { - /* Check whether or not the timer instance supports external trigger input mode 2 (ETRF)*/ - assert_param(IS_TIM_CLOCKSOURCE_ETRMODE2_INSTANCE(htim->Instance)); - - /* Check ETR input conditioning related parameters */ - assert_param(IS_TIM_CLOCKPRESCALER(sClockSourceConfig->ClockPrescaler)); - assert_param(IS_TIM_CLOCKPOLARITY(sClockSourceConfig->ClockPolarity)); - assert_param(IS_TIM_CLOCKFILTER(sClockSourceConfig->ClockFilter)); - - /* Configure the ETR Clock source */ - TIM_ETR_SetConfig(htim->Instance, - sClockSourceConfig->ClockPrescaler, - sClockSourceConfig->ClockPolarity, - sClockSourceConfig->ClockFilter); - /* Enable the External clock mode2 */ - htim->Instance->SMCR |= TIM_SMCR_ECE; - break; - } - - case TIM_CLOCKSOURCE_TI1: - { - /* Check whether or not the timer instance supports external clock mode 1 */ - assert_param(IS_TIM_CLOCKSOURCE_TIX_INSTANCE(htim->Instance)); - - /* Check TI1 input conditioning related parameters */ - assert_param(IS_TIM_CLOCKPOLARITY(sClockSourceConfig->ClockPolarity)); - assert_param(IS_TIM_CLOCKFILTER(sClockSourceConfig->ClockFilter)); - - TIM_TI1_ConfigInputStage(htim->Instance, - sClockSourceConfig->ClockPolarity, - sClockSourceConfig->ClockFilter); - TIM_ITRx_SetConfig(htim->Instance, TIM_CLOCKSOURCE_TI1); - break; - } - - case TIM_CLOCKSOURCE_TI2: - { - /* Check whether or not the timer instance supports external clock mode 1 (ETRF)*/ - assert_param(IS_TIM_CLOCKSOURCE_TIX_INSTANCE(htim->Instance)); - - /* Check TI2 input conditioning related parameters */ - assert_param(IS_TIM_CLOCKPOLARITY(sClockSourceConfig->ClockPolarity)); - assert_param(IS_TIM_CLOCKFILTER(sClockSourceConfig->ClockFilter)); - - TIM_TI2_ConfigInputStage(htim->Instance, - sClockSourceConfig->ClockPolarity, - sClockSourceConfig->ClockFilter); - TIM_ITRx_SetConfig(htim->Instance, TIM_CLOCKSOURCE_TI2); - break; - } - - case TIM_CLOCKSOURCE_TI1ED: - { - /* Check whether or not the timer instance supports external clock mode 1 */ - assert_param(IS_TIM_CLOCKSOURCE_TIX_INSTANCE(htim->Instance)); - - /* Check TI1 input conditioning related parameters */ - assert_param(IS_TIM_CLOCKPOLARITY(sClockSourceConfig->ClockPolarity)); - assert_param(IS_TIM_CLOCKFILTER(sClockSourceConfig->ClockFilter)); - - TIM_TI1_ConfigInputStage(htim->Instance, - sClockSourceConfig->ClockPolarity, - sClockSourceConfig->ClockFilter); - TIM_ITRx_SetConfig(htim->Instance, TIM_CLOCKSOURCE_TI1ED); - break; - } - - case TIM_CLOCKSOURCE_ITR0: - case TIM_CLOCKSOURCE_ITR1: - case TIM_CLOCKSOURCE_ITR2: - case TIM_CLOCKSOURCE_ITR3: - { - /* Check whether or not the timer instance supports internal trigger input */ - assert_param(IS_TIM_CLOCKSOURCE_ITRX_INSTANCE(htim->Instance)); - - TIM_ITRx_SetConfig(htim->Instance, sClockSourceConfig->ClockSource); - break; - } - - default: - status = HAL_ERROR; - break; - } - htim->State = HAL_TIM_STATE_READY; - - __HAL_UNLOCK(htim); - - return status; -} - -/** - * @brief Selects the signal connected to the TI1 input: direct from CH1_input - * or a XOR combination between CH1_input, CH2_input & CH3_input - * @param htim TIM handle. - * @param TI1_Selection Indicate whether or not channel 1 is connected to the - * output of a XOR gate. - * This parameter can be one of the following values: - * @arg TIM_TI1SELECTION_CH1: The TIMx_CH1 pin is connected to TI1 input - * @arg TIM_TI1SELECTION_XORCOMBINATION: The TIMx_CH1, CH2 and CH3 - * pins are connected to the TI1 input (XOR combination) - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_ConfigTI1Input(TIM_HandleTypeDef *htim, uint32_t TI1_Selection) -{ - uint32_t tmpcr2; - - /* Check the parameters */ - assert_param(IS_TIM_XOR_INSTANCE(htim->Instance)); - assert_param(IS_TIM_TI1SELECTION(TI1_Selection)); - - /* Get the TIMx CR2 register value */ - tmpcr2 = htim->Instance->CR2; - - /* Reset the TI1 selection */ - tmpcr2 &= ~TIM_CR2_TI1S; - - /* Set the TI1 selection */ - tmpcr2 |= TI1_Selection; - - /* Write to TIMxCR2 */ - htim->Instance->CR2 = tmpcr2; - - return HAL_OK; -} - -/** - * @brief Configures the TIM in Slave mode - * @param htim TIM handle. - * @param sSlaveConfig pointer to a TIM_SlaveConfigTypeDef structure that - * contains the selected trigger (internal trigger input, filtered - * timer input or external trigger input) and the Slave mode - * (Disable, Reset, Gated, Trigger, External clock mode 1). - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_SlaveConfigSynchro(TIM_HandleTypeDef *htim, const TIM_SlaveConfigTypeDef *sSlaveConfig) -{ - /* Check the parameters */ - assert_param(IS_TIM_SLAVE_INSTANCE(htim->Instance)); - assert_param(IS_TIM_SLAVE_MODE(sSlaveConfig->SlaveMode)); - assert_param(IS_TIM_TRIGGER_SELECTION(sSlaveConfig->InputTrigger)); - - __HAL_LOCK(htim); - - htim->State = HAL_TIM_STATE_BUSY; - - if (TIM_SlaveTimer_SetConfig(htim, sSlaveConfig) != HAL_OK) - { - htim->State = HAL_TIM_STATE_READY; - __HAL_UNLOCK(htim); - return HAL_ERROR; - } - - /* Disable Trigger Interrupt */ - __HAL_TIM_DISABLE_IT(htim, TIM_IT_TRIGGER); - - /* Disable Trigger DMA request */ - __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_TRIGGER); - - htim->State = HAL_TIM_STATE_READY; - - __HAL_UNLOCK(htim); - - return HAL_OK; -} - -/** - * @brief Configures the TIM in Slave mode in interrupt mode - * @param htim TIM handle. - * @param sSlaveConfig pointer to a TIM_SlaveConfigTypeDef structure that - * contains the selected trigger (internal trigger input, filtered - * timer input or external trigger input) and the Slave mode - * (Disable, Reset, Gated, Trigger, External clock mode 1). - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_SlaveConfigSynchro_IT(TIM_HandleTypeDef *htim, - const TIM_SlaveConfigTypeDef *sSlaveConfig) -{ - /* Check the parameters */ - assert_param(IS_TIM_SLAVE_INSTANCE(htim->Instance)); - assert_param(IS_TIM_SLAVE_MODE(sSlaveConfig->SlaveMode)); - assert_param(IS_TIM_TRIGGER_SELECTION(sSlaveConfig->InputTrigger)); - - __HAL_LOCK(htim); - - htim->State = HAL_TIM_STATE_BUSY; - - if (TIM_SlaveTimer_SetConfig(htim, sSlaveConfig) != HAL_OK) - { - htim->State = HAL_TIM_STATE_READY; - __HAL_UNLOCK(htim); - return HAL_ERROR; - } - - /* Enable Trigger Interrupt */ - __HAL_TIM_ENABLE_IT(htim, TIM_IT_TRIGGER); - - /* Disable Trigger DMA request */ - __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_TRIGGER); - - htim->State = HAL_TIM_STATE_READY; - - __HAL_UNLOCK(htim); - - return HAL_OK; -} - -/** - * @brief Read the captured value from Capture Compare unit - * @param htim TIM handle. - * @param Channel TIM Channels to be enabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @arg TIM_CHANNEL_4: TIM Channel 4 selected - * @retval Captured value - */ -uint32_t HAL_TIM_ReadCapturedValue(const TIM_HandleTypeDef *htim, uint32_t Channel) -{ - uint32_t tmpreg = 0U; - - switch (Channel) - { - case TIM_CHANNEL_1: - { - /* Check the parameters */ - assert_param(IS_TIM_CC1_INSTANCE(htim->Instance)); - - /* Return the capture 1 value */ - tmpreg = htim->Instance->CCR1; - - break; - } - case TIM_CHANNEL_2: - { - /* Check the parameters */ - assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); - - /* Return the capture 2 value */ - tmpreg = htim->Instance->CCR2; - - break; - } - - case TIM_CHANNEL_3: - { - /* Check the parameters */ - assert_param(IS_TIM_CC3_INSTANCE(htim->Instance)); - - /* Return the capture 3 value */ - tmpreg = htim->Instance->CCR3; - - break; - } - - case TIM_CHANNEL_4: - { - /* Check the parameters */ - assert_param(IS_TIM_CC4_INSTANCE(htim->Instance)); - - /* Return the capture 4 value */ - tmpreg = htim->Instance->CCR4; - - break; - } - - default: - break; - } - - return tmpreg; -} - -/** - * @} - */ - -/** @defgroup TIM_Exported_Functions_Group9 TIM Callbacks functions - * @brief TIM Callbacks functions - * -@verbatim - ============================================================================== - ##### TIM Callbacks functions ##### - ============================================================================== - [..] - This section provides TIM callback functions: - (+) TIM Period elapsed callback - (+) TIM Output Compare callback - (+) TIM Input capture callback - (+) TIM Trigger callback - (+) TIM Error callback - -@endverbatim - * @{ - */ - -/** - * @brief Period elapsed callback in non-blocking mode - * @param htim TIM handle - * @retval None - */ -__weak void HAL_TIM_PeriodElapsedCallback(TIM_HandleTypeDef *htim) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(htim); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_TIM_PeriodElapsedCallback could be implemented in the user file - */ -} - -/** - * @brief Period elapsed half complete callback in non-blocking mode - * @param htim TIM handle - * @retval None - */ -__weak void HAL_TIM_PeriodElapsedHalfCpltCallback(TIM_HandleTypeDef *htim) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(htim); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_TIM_PeriodElapsedHalfCpltCallback could be implemented in the user file - */ -} - -/** - * @brief Output Compare callback in non-blocking mode - * @param htim TIM OC handle - * @retval None - */ -__weak void HAL_TIM_OC_DelayElapsedCallback(TIM_HandleTypeDef *htim) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(htim); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_TIM_OC_DelayElapsedCallback could be implemented in the user file - */ -} - -/** - * @brief Input Capture callback in non-blocking mode - * @param htim TIM IC handle - * @retval None - */ -__weak void HAL_TIM_IC_CaptureCallback(TIM_HandleTypeDef *htim) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(htim); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_TIM_IC_CaptureCallback could be implemented in the user file - */ -} - -/** - * @brief Input Capture half complete callback in non-blocking mode - * @param htim TIM IC handle - * @retval None - */ -__weak void HAL_TIM_IC_CaptureHalfCpltCallback(TIM_HandleTypeDef *htim) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(htim); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_TIM_IC_CaptureHalfCpltCallback could be implemented in the user file - */ -} - -/** - * @brief PWM Pulse finished callback in non-blocking mode - * @param htim TIM handle - * @retval None - */ -__weak void HAL_TIM_PWM_PulseFinishedCallback(TIM_HandleTypeDef *htim) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(htim); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_TIM_PWM_PulseFinishedCallback could be implemented in the user file - */ -} - -/** - * @brief PWM Pulse finished half complete callback in non-blocking mode - * @param htim TIM handle - * @retval None - */ -__weak void HAL_TIM_PWM_PulseFinishedHalfCpltCallback(TIM_HandleTypeDef *htim) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(htim); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_TIM_PWM_PulseFinishedHalfCpltCallback could be implemented in the user file - */ -} - -/** - * @brief Hall Trigger detection callback in non-blocking mode - * @param htim TIM handle - * @retval None - */ -__weak void HAL_TIM_TriggerCallback(TIM_HandleTypeDef *htim) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(htim); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_TIM_TriggerCallback could be implemented in the user file - */ -} - -/** - * @brief Hall Trigger detection half complete callback in non-blocking mode - * @param htim TIM handle - * @retval None - */ -__weak void HAL_TIM_TriggerHalfCpltCallback(TIM_HandleTypeDef *htim) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(htim); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_TIM_TriggerHalfCpltCallback could be implemented in the user file - */ -} - -/** - * @brief Timer error callback in non-blocking mode - * @param htim TIM handle - * @retval None - */ -__weak void HAL_TIM_ErrorCallback(TIM_HandleTypeDef *htim) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(htim); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_TIM_ErrorCallback could be implemented in the user file - */ -} - -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) -/** - * @brief Register a User TIM callback to be used instead of the weak predefined callback - * @param htim tim handle - * @param CallbackID ID of the callback to be registered - * This parameter can be one of the following values: - * @arg @ref HAL_TIM_BASE_MSPINIT_CB_ID Base MspInit Callback ID - * @arg @ref HAL_TIM_BASE_MSPDEINIT_CB_ID Base MspDeInit Callback ID - * @arg @ref HAL_TIM_IC_MSPINIT_CB_ID IC MspInit Callback ID - * @arg @ref HAL_TIM_IC_MSPDEINIT_CB_ID IC MspDeInit Callback ID - * @arg @ref HAL_TIM_OC_MSPINIT_CB_ID OC MspInit Callback ID - * @arg @ref HAL_TIM_OC_MSPDEINIT_CB_ID OC MspDeInit Callback ID - * @arg @ref HAL_TIM_PWM_MSPINIT_CB_ID PWM MspInit Callback ID - * @arg @ref HAL_TIM_PWM_MSPDEINIT_CB_ID PWM MspDeInit Callback ID - * @arg @ref HAL_TIM_ONE_PULSE_MSPINIT_CB_ID One Pulse MspInit Callback ID - * @arg @ref HAL_TIM_ONE_PULSE_MSPDEINIT_CB_ID One Pulse MspDeInit Callback ID - * @arg @ref HAL_TIM_ENCODER_MSPINIT_CB_ID Encoder MspInit Callback ID - * @arg @ref HAL_TIM_ENCODER_MSPDEINIT_CB_ID Encoder MspDeInit Callback ID - * @arg @ref HAL_TIM_HALL_SENSOR_MSPINIT_CB_ID Hall Sensor MspInit Callback ID - * @arg @ref HAL_TIM_HALL_SENSOR_MSPDEINIT_CB_ID Hall Sensor MspDeInit Callback ID - * @arg @ref HAL_TIM_PERIOD_ELAPSED_CB_ID Period Elapsed Callback ID - * @arg @ref HAL_TIM_PERIOD_ELAPSED_HALF_CB_ID Period Elapsed half complete Callback ID - * @arg @ref HAL_TIM_TRIGGER_CB_ID Trigger Callback ID - * @arg @ref HAL_TIM_TRIGGER_HALF_CB_ID Trigger half complete Callback ID - * @arg @ref HAL_TIM_IC_CAPTURE_CB_ID Input Capture Callback ID - * @arg @ref HAL_TIM_IC_CAPTURE_HALF_CB_ID Input Capture half complete Callback ID - * @arg @ref HAL_TIM_OC_DELAY_ELAPSED_CB_ID Output Compare Delay Elapsed Callback ID - * @arg @ref HAL_TIM_PWM_PULSE_FINISHED_CB_ID PWM Pulse Finished Callback ID - * @arg @ref HAL_TIM_PWM_PULSE_FINISHED_HALF_CB_ID PWM Pulse Finished half complete Callback ID - * @arg @ref HAL_TIM_ERROR_CB_ID Error Callback ID - * @arg @ref HAL_TIM_COMMUTATION_CB_ID Commutation Callback ID - * @arg @ref HAL_TIM_COMMUTATION_HALF_CB_ID Commutation half complete Callback ID - * @arg @ref HAL_TIM_BREAK_CB_ID Break Callback ID - * @arg @ref HAL_TIM_BREAK2_CB_ID Break2 Callback ID - * @param pCallback pointer to the callback function - * @retval status - */ -HAL_StatusTypeDef HAL_TIM_RegisterCallback(TIM_HandleTypeDef *htim, HAL_TIM_CallbackIDTypeDef CallbackID, - pTIM_CallbackTypeDef pCallback) -{ - HAL_StatusTypeDef status = HAL_OK; - - if (pCallback == NULL) - { - return HAL_ERROR; - } - /* Process locked */ - __HAL_LOCK(htim); - - if (htim->State == HAL_TIM_STATE_READY) - { - switch (CallbackID) - { - case HAL_TIM_BASE_MSPINIT_CB_ID : - htim->Base_MspInitCallback = pCallback; - break; - - case HAL_TIM_BASE_MSPDEINIT_CB_ID : - htim->Base_MspDeInitCallback = pCallback; - break; - - case HAL_TIM_IC_MSPINIT_CB_ID : - htim->IC_MspInitCallback = pCallback; - break; - - case HAL_TIM_IC_MSPDEINIT_CB_ID : - htim->IC_MspDeInitCallback = pCallback; - break; - - case HAL_TIM_OC_MSPINIT_CB_ID : - htim->OC_MspInitCallback = pCallback; - break; - - case HAL_TIM_OC_MSPDEINIT_CB_ID : - htim->OC_MspDeInitCallback = pCallback; - break; - - case HAL_TIM_PWM_MSPINIT_CB_ID : - htim->PWM_MspInitCallback = pCallback; - break; - - case HAL_TIM_PWM_MSPDEINIT_CB_ID : - htim->PWM_MspDeInitCallback = pCallback; - break; - - case HAL_TIM_ONE_PULSE_MSPINIT_CB_ID : - htim->OnePulse_MspInitCallback = pCallback; - break; - - case HAL_TIM_ONE_PULSE_MSPDEINIT_CB_ID : - htim->OnePulse_MspDeInitCallback = pCallback; - break; - - case HAL_TIM_ENCODER_MSPINIT_CB_ID : - htim->Encoder_MspInitCallback = pCallback; - break; - - case HAL_TIM_ENCODER_MSPDEINIT_CB_ID : - htim->Encoder_MspDeInitCallback = pCallback; - break; - - case HAL_TIM_HALL_SENSOR_MSPINIT_CB_ID : - htim->HallSensor_MspInitCallback = pCallback; - break; - - case HAL_TIM_HALL_SENSOR_MSPDEINIT_CB_ID : - htim->HallSensor_MspDeInitCallback = pCallback; - break; - - case HAL_TIM_PERIOD_ELAPSED_CB_ID : - htim->PeriodElapsedCallback = pCallback; - break; - - case HAL_TIM_PERIOD_ELAPSED_HALF_CB_ID : - htim->PeriodElapsedHalfCpltCallback = pCallback; - break; - - case HAL_TIM_TRIGGER_CB_ID : - htim->TriggerCallback = pCallback; - break; - - case HAL_TIM_TRIGGER_HALF_CB_ID : - htim->TriggerHalfCpltCallback = pCallback; - break; - - case HAL_TIM_IC_CAPTURE_CB_ID : - htim->IC_CaptureCallback = pCallback; - break; - - case HAL_TIM_IC_CAPTURE_HALF_CB_ID : - htim->IC_CaptureHalfCpltCallback = pCallback; - break; - - case HAL_TIM_OC_DELAY_ELAPSED_CB_ID : - htim->OC_DelayElapsedCallback = pCallback; - break; - - case HAL_TIM_PWM_PULSE_FINISHED_CB_ID : - htim->PWM_PulseFinishedCallback = pCallback; - break; - - case HAL_TIM_PWM_PULSE_FINISHED_HALF_CB_ID : - htim->PWM_PulseFinishedHalfCpltCallback = pCallback; - break; - - case HAL_TIM_ERROR_CB_ID : - htim->ErrorCallback = pCallback; - break; - - case HAL_TIM_COMMUTATION_CB_ID : - htim->CommutationCallback = pCallback; - break; - - case HAL_TIM_COMMUTATION_HALF_CB_ID : - htim->CommutationHalfCpltCallback = pCallback; - break; - - case HAL_TIM_BREAK_CB_ID : - htim->BreakCallback = pCallback; - break; - - case HAL_TIM_BREAK2_CB_ID : - htim->Break2Callback = pCallback; - break; - - default : - /* Return error status */ - status = HAL_ERROR; - break; - } - } - else if (htim->State == HAL_TIM_STATE_RESET) - { - switch (CallbackID) - { - case HAL_TIM_BASE_MSPINIT_CB_ID : - htim->Base_MspInitCallback = pCallback; - break; - - case HAL_TIM_BASE_MSPDEINIT_CB_ID : - htim->Base_MspDeInitCallback = pCallback; - break; - - case HAL_TIM_IC_MSPINIT_CB_ID : - htim->IC_MspInitCallback = pCallback; - break; - - case HAL_TIM_IC_MSPDEINIT_CB_ID : - htim->IC_MspDeInitCallback = pCallback; - break; - - case HAL_TIM_OC_MSPINIT_CB_ID : - htim->OC_MspInitCallback = pCallback; - break; - - case HAL_TIM_OC_MSPDEINIT_CB_ID : - htim->OC_MspDeInitCallback = pCallback; - break; - - case HAL_TIM_PWM_MSPINIT_CB_ID : - htim->PWM_MspInitCallback = pCallback; - break; - - case HAL_TIM_PWM_MSPDEINIT_CB_ID : - htim->PWM_MspDeInitCallback = pCallback; - break; - - case HAL_TIM_ONE_PULSE_MSPINIT_CB_ID : - htim->OnePulse_MspInitCallback = pCallback; - break; - - case HAL_TIM_ONE_PULSE_MSPDEINIT_CB_ID : - htim->OnePulse_MspDeInitCallback = pCallback; - break; - - case HAL_TIM_ENCODER_MSPINIT_CB_ID : - htim->Encoder_MspInitCallback = pCallback; - break; - - case HAL_TIM_ENCODER_MSPDEINIT_CB_ID : - htim->Encoder_MspDeInitCallback = pCallback; - break; - - case HAL_TIM_HALL_SENSOR_MSPINIT_CB_ID : - htim->HallSensor_MspInitCallback = pCallback; - break; - - case HAL_TIM_HALL_SENSOR_MSPDEINIT_CB_ID : - htim->HallSensor_MspDeInitCallback = pCallback; - break; - - default : - /* Return error status */ - status = HAL_ERROR; - break; - } - } - else - { - /* Return error status */ - status = HAL_ERROR; - } - - /* Release Lock */ - __HAL_UNLOCK(htim); - - return status; -} - -/** - * @brief Unregister a TIM callback - * TIM callback is redirected to the weak predefined callback - * @param htim tim handle - * @param CallbackID ID of the callback to be unregistered - * This parameter can be one of the following values: - * @arg @ref HAL_TIM_BASE_MSPINIT_CB_ID Base MspInit Callback ID - * @arg @ref HAL_TIM_BASE_MSPDEINIT_CB_ID Base MspDeInit Callback ID - * @arg @ref HAL_TIM_IC_MSPINIT_CB_ID IC MspInit Callback ID - * @arg @ref HAL_TIM_IC_MSPDEINIT_CB_ID IC MspDeInit Callback ID - * @arg @ref HAL_TIM_OC_MSPINIT_CB_ID OC MspInit Callback ID - * @arg @ref HAL_TIM_OC_MSPDEINIT_CB_ID OC MspDeInit Callback ID - * @arg @ref HAL_TIM_PWM_MSPINIT_CB_ID PWM MspInit Callback ID - * @arg @ref HAL_TIM_PWM_MSPDEINIT_CB_ID PWM MspDeInit Callback ID - * @arg @ref HAL_TIM_ONE_PULSE_MSPINIT_CB_ID One Pulse MspInit Callback ID - * @arg @ref HAL_TIM_ONE_PULSE_MSPDEINIT_CB_ID One Pulse MspDeInit Callback ID - * @arg @ref HAL_TIM_ENCODER_MSPINIT_CB_ID Encoder MspInit Callback ID - * @arg @ref HAL_TIM_ENCODER_MSPDEINIT_CB_ID Encoder MspDeInit Callback ID - * @arg @ref HAL_TIM_HALL_SENSOR_MSPINIT_CB_ID Hall Sensor MspInit Callback ID - * @arg @ref HAL_TIM_HALL_SENSOR_MSPDEINIT_CB_ID Hall Sensor MspDeInit Callback ID - * @arg @ref HAL_TIM_PERIOD_ELAPSED_CB_ID Period Elapsed Callback ID - * @arg @ref HAL_TIM_PERIOD_ELAPSED_HALF_CB_ID Period Elapsed half complete Callback ID - * @arg @ref HAL_TIM_TRIGGER_CB_ID Trigger Callback ID - * @arg @ref HAL_TIM_TRIGGER_HALF_CB_ID Trigger half complete Callback ID - * @arg @ref HAL_TIM_IC_CAPTURE_CB_ID Input Capture Callback ID - * @arg @ref HAL_TIM_IC_CAPTURE_HALF_CB_ID Input Capture half complete Callback ID - * @arg @ref HAL_TIM_OC_DELAY_ELAPSED_CB_ID Output Compare Delay Elapsed Callback ID - * @arg @ref HAL_TIM_PWM_PULSE_FINISHED_CB_ID PWM Pulse Finished Callback ID - * @arg @ref HAL_TIM_PWM_PULSE_FINISHED_HALF_CB_ID PWM Pulse Finished half complete Callback ID - * @arg @ref HAL_TIM_ERROR_CB_ID Error Callback ID - * @arg @ref HAL_TIM_COMMUTATION_CB_ID Commutation Callback ID - * @arg @ref HAL_TIM_COMMUTATION_HALF_CB_ID Commutation half complete Callback ID - * @arg @ref HAL_TIM_BREAK_CB_ID Break Callback ID - * @arg @ref HAL_TIM_BREAK2_CB_ID Break2 Callback ID - * @retval status - */ -HAL_StatusTypeDef HAL_TIM_UnRegisterCallback(TIM_HandleTypeDef *htim, HAL_TIM_CallbackIDTypeDef CallbackID) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Process locked */ - __HAL_LOCK(htim); - - if (htim->State == HAL_TIM_STATE_READY) - { - switch (CallbackID) - { - case HAL_TIM_BASE_MSPINIT_CB_ID : - /* Legacy weak Base MspInit Callback */ - htim->Base_MspInitCallback = HAL_TIM_Base_MspInit; - break; - - case HAL_TIM_BASE_MSPDEINIT_CB_ID : - /* Legacy weak Base Msp DeInit Callback */ - htim->Base_MspDeInitCallback = HAL_TIM_Base_MspDeInit; - break; - - case HAL_TIM_IC_MSPINIT_CB_ID : - /* Legacy weak IC Msp Init Callback */ - htim->IC_MspInitCallback = HAL_TIM_IC_MspInit; - break; - - case HAL_TIM_IC_MSPDEINIT_CB_ID : - /* Legacy weak IC Msp DeInit Callback */ - htim->IC_MspDeInitCallback = HAL_TIM_IC_MspDeInit; - break; - - case HAL_TIM_OC_MSPINIT_CB_ID : - /* Legacy weak OC Msp Init Callback */ - htim->OC_MspInitCallback = HAL_TIM_OC_MspInit; - break; - - case HAL_TIM_OC_MSPDEINIT_CB_ID : - /* Legacy weak OC Msp DeInit Callback */ - htim->OC_MspDeInitCallback = HAL_TIM_OC_MspDeInit; - break; - - case HAL_TIM_PWM_MSPINIT_CB_ID : - /* Legacy weak PWM Msp Init Callback */ - htim->PWM_MspInitCallback = HAL_TIM_PWM_MspInit; - break; - - case HAL_TIM_PWM_MSPDEINIT_CB_ID : - /* Legacy weak PWM Msp DeInit Callback */ - htim->PWM_MspDeInitCallback = HAL_TIM_PWM_MspDeInit; - break; - - case HAL_TIM_ONE_PULSE_MSPINIT_CB_ID : - /* Legacy weak One Pulse Msp Init Callback */ - htim->OnePulse_MspInitCallback = HAL_TIM_OnePulse_MspInit; - break; - - case HAL_TIM_ONE_PULSE_MSPDEINIT_CB_ID : - /* Legacy weak One Pulse Msp DeInit Callback */ - htim->OnePulse_MspDeInitCallback = HAL_TIM_OnePulse_MspDeInit; - break; - - case HAL_TIM_ENCODER_MSPINIT_CB_ID : - /* Legacy weak Encoder Msp Init Callback */ - htim->Encoder_MspInitCallback = HAL_TIM_Encoder_MspInit; - break; - - case HAL_TIM_ENCODER_MSPDEINIT_CB_ID : - /* Legacy weak Encoder Msp DeInit Callback */ - htim->Encoder_MspDeInitCallback = HAL_TIM_Encoder_MspDeInit; - break; - - case HAL_TIM_HALL_SENSOR_MSPINIT_CB_ID : - /* Legacy weak Hall Sensor Msp Init Callback */ - htim->HallSensor_MspInitCallback = HAL_TIMEx_HallSensor_MspInit; - break; - - case HAL_TIM_HALL_SENSOR_MSPDEINIT_CB_ID : - /* Legacy weak Hall Sensor Msp DeInit Callback */ - htim->HallSensor_MspDeInitCallback = HAL_TIMEx_HallSensor_MspDeInit; - break; - - case HAL_TIM_PERIOD_ELAPSED_CB_ID : - /* Legacy weak Period Elapsed Callback */ - htim->PeriodElapsedCallback = HAL_TIM_PeriodElapsedCallback; - break; - - case HAL_TIM_PERIOD_ELAPSED_HALF_CB_ID : - /* Legacy weak Period Elapsed half complete Callback */ - htim->PeriodElapsedHalfCpltCallback = HAL_TIM_PeriodElapsedHalfCpltCallback; - break; - - case HAL_TIM_TRIGGER_CB_ID : - /* Legacy weak Trigger Callback */ - htim->TriggerCallback = HAL_TIM_TriggerCallback; - break; - - case HAL_TIM_TRIGGER_HALF_CB_ID : - /* Legacy weak Trigger half complete Callback */ - htim->TriggerHalfCpltCallback = HAL_TIM_TriggerHalfCpltCallback; - break; - - case HAL_TIM_IC_CAPTURE_CB_ID : - /* Legacy weak IC Capture Callback */ - htim->IC_CaptureCallback = HAL_TIM_IC_CaptureCallback; - break; - - case HAL_TIM_IC_CAPTURE_HALF_CB_ID : - /* Legacy weak IC Capture half complete Callback */ - htim->IC_CaptureHalfCpltCallback = HAL_TIM_IC_CaptureHalfCpltCallback; - break; - - case HAL_TIM_OC_DELAY_ELAPSED_CB_ID : - /* Legacy weak OC Delay Elapsed Callback */ - htim->OC_DelayElapsedCallback = HAL_TIM_OC_DelayElapsedCallback; - break; - - case HAL_TIM_PWM_PULSE_FINISHED_CB_ID : - /* Legacy weak PWM Pulse Finished Callback */ - htim->PWM_PulseFinishedCallback = HAL_TIM_PWM_PulseFinishedCallback; - break; - - case HAL_TIM_PWM_PULSE_FINISHED_HALF_CB_ID : - /* Legacy weak PWM Pulse Finished half complete Callback */ - htim->PWM_PulseFinishedHalfCpltCallback = HAL_TIM_PWM_PulseFinishedHalfCpltCallback; - break; - - case HAL_TIM_ERROR_CB_ID : - /* Legacy weak Error Callback */ - htim->ErrorCallback = HAL_TIM_ErrorCallback; - break; - - case HAL_TIM_COMMUTATION_CB_ID : - /* Legacy weak Commutation Callback */ - htim->CommutationCallback = HAL_TIMEx_CommutCallback; - break; - - case HAL_TIM_COMMUTATION_HALF_CB_ID : - /* Legacy weak Commutation half complete Callback */ - htim->CommutationHalfCpltCallback = HAL_TIMEx_CommutHalfCpltCallback; - break; - - case HAL_TIM_BREAK_CB_ID : - /* Legacy weak Break Callback */ - htim->BreakCallback = HAL_TIMEx_BreakCallback; - break; - - case HAL_TIM_BREAK2_CB_ID : - /* Legacy weak Break2 Callback */ - htim->Break2Callback = HAL_TIMEx_Break2Callback; - break; - - default : - /* Return error status */ - status = HAL_ERROR; - break; - } - } - else if (htim->State == HAL_TIM_STATE_RESET) - { - switch (CallbackID) - { - case HAL_TIM_BASE_MSPINIT_CB_ID : - /* Legacy weak Base MspInit Callback */ - htim->Base_MspInitCallback = HAL_TIM_Base_MspInit; - break; - - case HAL_TIM_BASE_MSPDEINIT_CB_ID : - /* Legacy weak Base Msp DeInit Callback */ - htim->Base_MspDeInitCallback = HAL_TIM_Base_MspDeInit; - break; - - case HAL_TIM_IC_MSPINIT_CB_ID : - /* Legacy weak IC Msp Init Callback */ - htim->IC_MspInitCallback = HAL_TIM_IC_MspInit; - break; - - case HAL_TIM_IC_MSPDEINIT_CB_ID : - /* Legacy weak IC Msp DeInit Callback */ - htim->IC_MspDeInitCallback = HAL_TIM_IC_MspDeInit; - break; - - case HAL_TIM_OC_MSPINIT_CB_ID : - /* Legacy weak OC Msp Init Callback */ - htim->OC_MspInitCallback = HAL_TIM_OC_MspInit; - break; - - case HAL_TIM_OC_MSPDEINIT_CB_ID : - /* Legacy weak OC Msp DeInit Callback */ - htim->OC_MspDeInitCallback = HAL_TIM_OC_MspDeInit; - break; - - case HAL_TIM_PWM_MSPINIT_CB_ID : - /* Legacy weak PWM Msp Init Callback */ - htim->PWM_MspInitCallback = HAL_TIM_PWM_MspInit; - break; - - case HAL_TIM_PWM_MSPDEINIT_CB_ID : - /* Legacy weak PWM Msp DeInit Callback */ - htim->PWM_MspDeInitCallback = HAL_TIM_PWM_MspDeInit; - break; - - case HAL_TIM_ONE_PULSE_MSPINIT_CB_ID : - /* Legacy weak One Pulse Msp Init Callback */ - htim->OnePulse_MspInitCallback = HAL_TIM_OnePulse_MspInit; - break; - - case HAL_TIM_ONE_PULSE_MSPDEINIT_CB_ID : - /* Legacy weak One Pulse Msp DeInit Callback */ - htim->OnePulse_MspDeInitCallback = HAL_TIM_OnePulse_MspDeInit; - break; - - case HAL_TIM_ENCODER_MSPINIT_CB_ID : - /* Legacy weak Encoder Msp Init Callback */ - htim->Encoder_MspInitCallback = HAL_TIM_Encoder_MspInit; - break; - - case HAL_TIM_ENCODER_MSPDEINIT_CB_ID : - /* Legacy weak Encoder Msp DeInit Callback */ - htim->Encoder_MspDeInitCallback = HAL_TIM_Encoder_MspDeInit; - break; - - case HAL_TIM_HALL_SENSOR_MSPINIT_CB_ID : - /* Legacy weak Hall Sensor Msp Init Callback */ - htim->HallSensor_MspInitCallback = HAL_TIMEx_HallSensor_MspInit; - break; - - case HAL_TIM_HALL_SENSOR_MSPDEINIT_CB_ID : - /* Legacy weak Hall Sensor Msp DeInit Callback */ - htim->HallSensor_MspDeInitCallback = HAL_TIMEx_HallSensor_MspDeInit; - break; - - default : - /* Return error status */ - status = HAL_ERROR; - break; - } - } - else - { - /* Return error status */ - status = HAL_ERROR; - } - - /* Release Lock */ - __HAL_UNLOCK(htim); - - return status; -} -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ - -/** - * @} - */ - -/** @defgroup TIM_Exported_Functions_Group10 TIM Peripheral State functions - * @brief TIM Peripheral State functions - * -@verbatim - ============================================================================== - ##### Peripheral State functions ##### - ============================================================================== - [..] - This subsection permits to get in run-time the status of the peripheral - and the data flow. - -@endverbatim - * @{ - */ - -/** - * @brief Return the TIM Base handle state. - * @param htim TIM Base handle - * @retval HAL state - */ -HAL_TIM_StateTypeDef HAL_TIM_Base_GetState(const TIM_HandleTypeDef *htim) -{ - return htim->State; -} - -/** - * @brief Return the TIM OC handle state. - * @param htim TIM Output Compare handle - * @retval HAL state - */ -HAL_TIM_StateTypeDef HAL_TIM_OC_GetState(const TIM_HandleTypeDef *htim) -{ - return htim->State; -} - -/** - * @brief Return the TIM PWM handle state. - * @param htim TIM handle - * @retval HAL state - */ -HAL_TIM_StateTypeDef HAL_TIM_PWM_GetState(const TIM_HandleTypeDef *htim) -{ - return htim->State; -} - -/** - * @brief Return the TIM Input Capture handle state. - * @param htim TIM IC handle - * @retval HAL state - */ -HAL_TIM_StateTypeDef HAL_TIM_IC_GetState(const TIM_HandleTypeDef *htim) -{ - return htim->State; -} - -/** - * @brief Return the TIM One Pulse Mode handle state. - * @param htim TIM OPM handle - * @retval HAL state - */ -HAL_TIM_StateTypeDef HAL_TIM_OnePulse_GetState(const TIM_HandleTypeDef *htim) -{ - return htim->State; -} - -/** - * @brief Return the TIM Encoder Mode handle state. - * @param htim TIM Encoder Interface handle - * @retval HAL state - */ -HAL_TIM_StateTypeDef HAL_TIM_Encoder_GetState(const TIM_HandleTypeDef *htim) -{ - return htim->State; -} - -/** - * @brief Return the TIM Encoder Mode handle state. - * @param htim TIM handle - * @retval Active channel - */ -HAL_TIM_ActiveChannel HAL_TIM_GetActiveChannel(const TIM_HandleTypeDef *htim) -{ - return htim->Channel; -} - -/** - * @brief Return actual state of the TIM channel. - * @param htim TIM handle - * @param Channel TIM Channel - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 - * @arg TIM_CHANNEL_2: TIM Channel 2 - * @arg TIM_CHANNEL_3: TIM Channel 3 - * @arg TIM_CHANNEL_4: TIM Channel 4 - * @arg TIM_CHANNEL_5: TIM Channel 5 - * @arg TIM_CHANNEL_6: TIM Channel 6 - * @retval TIM Channel state - */ -HAL_TIM_ChannelStateTypeDef HAL_TIM_GetChannelState(const TIM_HandleTypeDef *htim, uint32_t Channel) -{ - HAL_TIM_ChannelStateTypeDef channel_state; - - /* Check the parameters */ - assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); - - channel_state = TIM_CHANNEL_STATE_GET(htim, Channel); - - return channel_state; -} - -/** - * @brief Return actual state of a DMA burst operation. - * @param htim TIM handle - * @retval DMA burst state - */ -HAL_TIM_DMABurstStateTypeDef HAL_TIM_DMABurstState(const TIM_HandleTypeDef *htim) -{ - /* Check the parameters */ - assert_param(IS_TIM_DMABURST_INSTANCE(htim->Instance)); - - return htim->DMABurstState; -} - -/** - * @} - */ - -/** - * @} - */ - -/** @defgroup TIM_Private_Functions TIM Private Functions - * @{ - */ - -/** - * @brief TIM DMA error callback - * @param hdma pointer to DMA handle. - * @retval None - */ -void TIM_DMAError(DMA_HandleTypeDef *hdma) -{ - TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; - - if (hdma == htim->hdma[TIM_DMA_ID_CC1]) - { - htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1; - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); - } - else if (hdma == htim->hdma[TIM_DMA_ID_CC2]) - { - htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2; - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); - } - else if (hdma == htim->hdma[TIM_DMA_ID_CC3]) - { - htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3; - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_3, HAL_TIM_CHANNEL_STATE_READY); - } - else if (hdma == htim->hdma[TIM_DMA_ID_CC4]) - { - htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4; - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_4, HAL_TIM_CHANNEL_STATE_READY); - } - else - { - htim->State = HAL_TIM_STATE_READY; - } - -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) - htim->ErrorCallback(htim); -#else - HAL_TIM_ErrorCallback(htim); -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ - - htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; -} - -/** - * @brief TIM DMA Delay Pulse complete callback. - * @param hdma pointer to DMA handle. - * @retval None - */ -static void TIM_DMADelayPulseCplt(DMA_HandleTypeDef *hdma) -{ - TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; - - if (hdma == htim->hdma[TIM_DMA_ID_CC1]) - { - htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1; - - if (hdma->Init.Mode == DMA_NORMAL) - { - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); - } - } - else if (hdma == htim->hdma[TIM_DMA_ID_CC2]) - { - htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2; - - if (hdma->Init.Mode == DMA_NORMAL) - { - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); - } - } - else if (hdma == htim->hdma[TIM_DMA_ID_CC3]) - { - htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3; - - if (hdma->Init.Mode == DMA_NORMAL) - { - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_3, HAL_TIM_CHANNEL_STATE_READY); - } - } - else if (hdma == htim->hdma[TIM_DMA_ID_CC4]) - { - htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4; - - if (hdma->Init.Mode == DMA_NORMAL) - { - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_4, HAL_TIM_CHANNEL_STATE_READY); - } - } - else - { - /* nothing to do */ - } - -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) - htim->PWM_PulseFinishedCallback(htim); -#else - HAL_TIM_PWM_PulseFinishedCallback(htim); -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ - - htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; -} - -/** - * @brief TIM DMA Delay Pulse half complete callback. - * @param hdma pointer to DMA handle. - * @retval None - */ -void TIM_DMADelayPulseHalfCplt(DMA_HandleTypeDef *hdma) -{ - TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; - - if (hdma == htim->hdma[TIM_DMA_ID_CC1]) - { - htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1; - } - else if (hdma == htim->hdma[TIM_DMA_ID_CC2]) - { - htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2; - } - else if (hdma == htim->hdma[TIM_DMA_ID_CC3]) - { - htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3; - } - else if (hdma == htim->hdma[TIM_DMA_ID_CC4]) - { - htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4; - } - else - { - /* nothing to do */ - } - -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) - htim->PWM_PulseFinishedHalfCpltCallback(htim); -#else - HAL_TIM_PWM_PulseFinishedHalfCpltCallback(htim); -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ - - htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; -} - -/** - * @brief TIM DMA Capture complete callback. - * @param hdma pointer to DMA handle. - * @retval None - */ -void TIM_DMACaptureCplt(DMA_HandleTypeDef *hdma) -{ - TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; - - if (hdma == htim->hdma[TIM_DMA_ID_CC1]) - { - htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1; - - if (hdma->Init.Mode == DMA_NORMAL) - { - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); - } - } - else if (hdma == htim->hdma[TIM_DMA_ID_CC2]) - { - htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2; - - if (hdma->Init.Mode == DMA_NORMAL) - { - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); - } - } - else if (hdma == htim->hdma[TIM_DMA_ID_CC3]) - { - htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3; - - if (hdma->Init.Mode == DMA_NORMAL) - { - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_3, HAL_TIM_CHANNEL_STATE_READY); - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_3, HAL_TIM_CHANNEL_STATE_READY); - } - } - else if (hdma == htim->hdma[TIM_DMA_ID_CC4]) - { - htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4; - - if (hdma->Init.Mode == DMA_NORMAL) - { - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_4, HAL_TIM_CHANNEL_STATE_READY); - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_4, HAL_TIM_CHANNEL_STATE_READY); - } - } - else - { - /* nothing to do */ - } - -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) - htim->IC_CaptureCallback(htim); -#else - HAL_TIM_IC_CaptureCallback(htim); -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ - - htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; -} - -/** - * @brief TIM DMA Capture half complete callback. - * @param hdma pointer to DMA handle. - * @retval None - */ -void TIM_DMACaptureHalfCplt(DMA_HandleTypeDef *hdma) -{ - TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; - - if (hdma == htim->hdma[TIM_DMA_ID_CC1]) - { - htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1; - } - else if (hdma == htim->hdma[TIM_DMA_ID_CC2]) - { - htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2; - } - else if (hdma == htim->hdma[TIM_DMA_ID_CC3]) - { - htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3; - } - else if (hdma == htim->hdma[TIM_DMA_ID_CC4]) - { - htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4; - } - else - { - /* nothing to do */ - } - -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) - htim->IC_CaptureHalfCpltCallback(htim); -#else - HAL_TIM_IC_CaptureHalfCpltCallback(htim); -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ - - htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; -} - -/** - * @brief TIM DMA Period Elapse complete callback. - * @param hdma pointer to DMA handle. - * @retval None - */ -static void TIM_DMAPeriodElapsedCplt(DMA_HandleTypeDef *hdma) -{ - TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; - - if (htim->hdma[TIM_DMA_ID_UPDATE]->Init.Mode == DMA_NORMAL) - { - htim->State = HAL_TIM_STATE_READY; - } - -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) - htim->PeriodElapsedCallback(htim); -#else - HAL_TIM_PeriodElapsedCallback(htim); -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ -} - -/** - * @brief TIM DMA Period Elapse half complete callback. - * @param hdma pointer to DMA handle. - * @retval None - */ -static void TIM_DMAPeriodElapsedHalfCplt(DMA_HandleTypeDef *hdma) -{ - TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; - -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) - htim->PeriodElapsedHalfCpltCallback(htim); -#else - HAL_TIM_PeriodElapsedHalfCpltCallback(htim); -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ -} - -/** - * @brief TIM DMA Trigger callback. - * @param hdma pointer to DMA handle. - * @retval None - */ -static void TIM_DMATriggerCplt(DMA_HandleTypeDef *hdma) -{ - TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; - - if (htim->hdma[TIM_DMA_ID_TRIGGER]->Init.Mode == DMA_NORMAL) - { - htim->State = HAL_TIM_STATE_READY; - } - -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) - htim->TriggerCallback(htim); -#else - HAL_TIM_TriggerCallback(htim); -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ -} - -/** - * @brief TIM DMA Trigger half complete callback. - * @param hdma pointer to DMA handle. - * @retval None - */ -static void TIM_DMATriggerHalfCplt(DMA_HandleTypeDef *hdma) -{ - TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; - -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) - htim->TriggerHalfCpltCallback(htim); -#else - HAL_TIM_TriggerHalfCpltCallback(htim); -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ -} - -/** - * @brief Time Base configuration - * @param TIMx TIM peripheral - * @param Structure TIM Base configuration structure - * @retval None - */ -void TIM_Base_SetConfig(TIM_TypeDef *TIMx, const TIM_Base_InitTypeDef *Structure) -{ - uint32_t tmpcr1; - tmpcr1 = TIMx->CR1; - - /* Set TIM Time Base Unit parameters ---------------------------------------*/ - if (IS_TIM_COUNTER_MODE_SELECT_INSTANCE(TIMx)) - { - /* Select the Counter Mode */ - tmpcr1 &= ~(TIM_CR1_DIR | TIM_CR1_CMS); - tmpcr1 |= Structure->CounterMode; - } - - if (IS_TIM_CLOCK_DIVISION_INSTANCE(TIMx)) - { - /* Set the clock division */ - tmpcr1 &= ~TIM_CR1_CKD; - tmpcr1 |= (uint32_t)Structure->ClockDivision; - } - - /* Set the auto-reload preload */ - MODIFY_REG(tmpcr1, TIM_CR1_ARPE, Structure->AutoReloadPreload); - - TIMx->CR1 = tmpcr1; - - /* Set the Autoreload value */ - TIMx->ARR = (uint32_t)Structure->Period ; - - /* Set the Prescaler value */ - TIMx->PSC = Structure->Prescaler; - - if (IS_TIM_REPETITION_COUNTER_INSTANCE(TIMx)) - { - /* Set the Repetition Counter value */ - TIMx->RCR = Structure->RepetitionCounter; - } - - /* Generate an update event to reload the Prescaler - and the repetition counter (only for advanced timer) value immediately */ - TIMx->EGR = TIM_EGR_UG; -} - -/** - * @brief Timer Output Compare 1 configuration - * @param TIMx to select the TIM peripheral - * @param OC_Config The output configuration structure - * @retval None - */ -static void TIM_OC1_SetConfig(TIM_TypeDef *TIMx, const TIM_OC_InitTypeDef *OC_Config) -{ - uint32_t tmpccmrx; - uint32_t tmpccer; - uint32_t tmpcr2; - - /* Disable the Channel 1: Reset the CC1E Bit */ - TIMx->CCER &= ~TIM_CCER_CC1E; - - /* Get the TIMx CCER register value */ - tmpccer = TIMx->CCER; - /* Get the TIMx CR2 register value */ - tmpcr2 = TIMx->CR2; - - /* Get the TIMx CCMR1 register value */ - tmpccmrx = TIMx->CCMR1; - - /* Reset the Output Compare Mode Bits */ - tmpccmrx &= ~TIM_CCMR1_OC1M; - tmpccmrx &= ~TIM_CCMR1_CC1S; - /* Select the Output Compare Mode */ - tmpccmrx |= OC_Config->OCMode; - - /* Reset the Output Polarity level */ - tmpccer &= ~TIM_CCER_CC1P; - /* Set the Output Compare Polarity */ - tmpccer |= OC_Config->OCPolarity; - - if (IS_TIM_CCXN_INSTANCE(TIMx, TIM_CHANNEL_1)) - { - /* Check parameters */ - assert_param(IS_TIM_OCN_POLARITY(OC_Config->OCNPolarity)); - - /* Reset the Output N Polarity level */ - tmpccer &= ~TIM_CCER_CC1NP; - /* Set the Output N Polarity */ - tmpccer |= OC_Config->OCNPolarity; - /* Reset the Output N State */ - tmpccer &= ~TIM_CCER_CC1NE; - } - - if (IS_TIM_BREAK_INSTANCE(TIMx)) - { - /* Check parameters */ - assert_param(IS_TIM_OCNIDLE_STATE(OC_Config->OCNIdleState)); - assert_param(IS_TIM_OCIDLE_STATE(OC_Config->OCIdleState)); - - /* Reset the Output Compare and Output Compare N IDLE State */ - tmpcr2 &= ~TIM_CR2_OIS1; - tmpcr2 &= ~TIM_CR2_OIS1N; - /* Set the Output Idle state */ - tmpcr2 |= OC_Config->OCIdleState; - /* Set the Output N Idle state */ - tmpcr2 |= OC_Config->OCNIdleState; - } - - /* Write to TIMx CR2 */ - TIMx->CR2 = tmpcr2; - - /* Write to TIMx CCMR1 */ - TIMx->CCMR1 = tmpccmrx; - - /* Set the Capture Compare Register value */ - TIMx->CCR1 = OC_Config->Pulse; - - /* Write to TIMx CCER */ - TIMx->CCER = tmpccer; -} - -/** - * @brief Timer Output Compare 2 configuration - * @param TIMx to select the TIM peripheral - * @param OC_Config The output configuration structure - * @retval None - */ -void TIM_OC2_SetConfig(TIM_TypeDef *TIMx, const TIM_OC_InitTypeDef *OC_Config) -{ - uint32_t tmpccmrx; - uint32_t tmpccer; - uint32_t tmpcr2; - - /* Disable the Channel 2: Reset the CC2E Bit */ - TIMx->CCER &= ~TIM_CCER_CC2E; - - /* Get the TIMx CCER register value */ - tmpccer = TIMx->CCER; - /* Get the TIMx CR2 register value */ - tmpcr2 = TIMx->CR2; - - /* Get the TIMx CCMR1 register value */ - tmpccmrx = TIMx->CCMR1; - - /* Reset the Output Compare mode and Capture/Compare selection Bits */ - tmpccmrx &= ~TIM_CCMR1_OC2M; - tmpccmrx &= ~TIM_CCMR1_CC2S; - - /* Select the Output Compare Mode */ - tmpccmrx |= (OC_Config->OCMode << 8U); - - /* Reset the Output Polarity level */ - tmpccer &= ~TIM_CCER_CC2P; - /* Set the Output Compare Polarity */ - tmpccer |= (OC_Config->OCPolarity << 4U); - - if (IS_TIM_CCXN_INSTANCE(TIMx, TIM_CHANNEL_2)) - { - assert_param(IS_TIM_OCN_POLARITY(OC_Config->OCNPolarity)); - - /* Reset the Output N Polarity level */ - tmpccer &= ~TIM_CCER_CC2NP; - /* Set the Output N Polarity */ - tmpccer |= (OC_Config->OCNPolarity << 4U); - /* Reset the Output N State */ - tmpccer &= ~TIM_CCER_CC2NE; - - } - - if (IS_TIM_BREAK_INSTANCE(TIMx)) - { - /* Check parameters */ - assert_param(IS_TIM_OCNIDLE_STATE(OC_Config->OCNIdleState)); - assert_param(IS_TIM_OCIDLE_STATE(OC_Config->OCIdleState)); - - /* Reset the Output Compare and Output Compare N IDLE State */ - tmpcr2 &= ~TIM_CR2_OIS2; - tmpcr2 &= ~TIM_CR2_OIS2N; - /* Set the Output Idle state */ - tmpcr2 |= (OC_Config->OCIdleState << 2U); - /* Set the Output N Idle state */ - tmpcr2 |= (OC_Config->OCNIdleState << 2U); - } - - /* Write to TIMx CR2 */ - TIMx->CR2 = tmpcr2; - - /* Write to TIMx CCMR1 */ - TIMx->CCMR1 = tmpccmrx; - - /* Set the Capture Compare Register value */ - TIMx->CCR2 = OC_Config->Pulse; - - /* Write to TIMx CCER */ - TIMx->CCER = tmpccer; -} - -/** - * @brief Timer Output Compare 3 configuration - * @param TIMx to select the TIM peripheral - * @param OC_Config The output configuration structure - * @retval None - */ -static void TIM_OC3_SetConfig(TIM_TypeDef *TIMx, const TIM_OC_InitTypeDef *OC_Config) -{ - uint32_t tmpccmrx; - uint32_t tmpccer; - uint32_t tmpcr2; - - /* Disable the Channel 3: Reset the CC2E Bit */ - TIMx->CCER &= ~TIM_CCER_CC3E; - - /* Get the TIMx CCER register value */ - tmpccer = TIMx->CCER; - /* Get the TIMx CR2 register value */ - tmpcr2 = TIMx->CR2; - - /* Get the TIMx CCMR2 register value */ - tmpccmrx = TIMx->CCMR2; - - /* Reset the Output Compare mode and Capture/Compare selection Bits */ - tmpccmrx &= ~TIM_CCMR2_OC3M; - tmpccmrx &= ~TIM_CCMR2_CC3S; - /* Select the Output Compare Mode */ - tmpccmrx |= OC_Config->OCMode; - - /* Reset the Output Polarity level */ - tmpccer &= ~TIM_CCER_CC3P; - /* Set the Output Compare Polarity */ - tmpccer |= (OC_Config->OCPolarity << 8U); - - if (IS_TIM_CCXN_INSTANCE(TIMx, TIM_CHANNEL_3)) - { - assert_param(IS_TIM_OCN_POLARITY(OC_Config->OCNPolarity)); - - /* Reset the Output N Polarity level */ - tmpccer &= ~TIM_CCER_CC3NP; - /* Set the Output N Polarity */ - tmpccer |= (OC_Config->OCNPolarity << 8U); - /* Reset the Output N State */ - tmpccer &= ~TIM_CCER_CC3NE; - } - - if (IS_TIM_BREAK_INSTANCE(TIMx)) - { - /* Check parameters */ - assert_param(IS_TIM_OCNIDLE_STATE(OC_Config->OCNIdleState)); - assert_param(IS_TIM_OCIDLE_STATE(OC_Config->OCIdleState)); - - /* Reset the Output Compare and Output Compare N IDLE State */ - tmpcr2 &= ~TIM_CR2_OIS3; - tmpcr2 &= ~TIM_CR2_OIS3N; - /* Set the Output Idle state */ - tmpcr2 |= (OC_Config->OCIdleState << 4U); - /* Set the Output N Idle state */ - tmpcr2 |= (OC_Config->OCNIdleState << 4U); - } - - /* Write to TIMx CR2 */ - TIMx->CR2 = tmpcr2; - - /* Write to TIMx CCMR2 */ - TIMx->CCMR2 = tmpccmrx; - - /* Set the Capture Compare Register value */ - TIMx->CCR3 = OC_Config->Pulse; - - /* Write to TIMx CCER */ - TIMx->CCER = tmpccer; -} - -/** - * @brief Timer Output Compare 4 configuration - * @param TIMx to select the TIM peripheral - * @param OC_Config The output configuration structure - * @retval None - */ -static void TIM_OC4_SetConfig(TIM_TypeDef *TIMx, const TIM_OC_InitTypeDef *OC_Config) -{ - uint32_t tmpccmrx; - uint32_t tmpccer; - uint32_t tmpcr2; - - /* Disable the Channel 4: Reset the CC4E Bit */ - TIMx->CCER &= ~TIM_CCER_CC4E; - - /* Get the TIMx CCER register value */ - tmpccer = TIMx->CCER; - /* Get the TIMx CR2 register value */ - tmpcr2 = TIMx->CR2; - - /* Get the TIMx CCMR2 register value */ - tmpccmrx = TIMx->CCMR2; - - /* Reset the Output Compare mode and Capture/Compare selection Bits */ - tmpccmrx &= ~TIM_CCMR2_OC4M; - tmpccmrx &= ~TIM_CCMR2_CC4S; - - /* Select the Output Compare Mode */ - tmpccmrx |= (OC_Config->OCMode << 8U); - - /* Reset the Output Polarity level */ - tmpccer &= ~TIM_CCER_CC4P; - /* Set the Output Compare Polarity */ - tmpccer |= (OC_Config->OCPolarity << 12U); - - if (IS_TIM_BREAK_INSTANCE(TIMx)) - { - /* Check parameters */ - assert_param(IS_TIM_OCIDLE_STATE(OC_Config->OCIdleState)); - - /* Reset the Output Compare IDLE State */ - tmpcr2 &= ~TIM_CR2_OIS4; - - /* Set the Output Idle state */ - tmpcr2 |= (OC_Config->OCIdleState << 6U); - } - - /* Write to TIMx CR2 */ - TIMx->CR2 = tmpcr2; - - /* Write to TIMx CCMR2 */ - TIMx->CCMR2 = tmpccmrx; - - /* Set the Capture Compare Register value */ - TIMx->CCR4 = OC_Config->Pulse; - - /* Write to TIMx CCER */ - TIMx->CCER = tmpccer; -} - -/** - * @brief Timer Output Compare 5 configuration - * @param TIMx to select the TIM peripheral - * @param OC_Config The output configuration structure - * @retval None - */ -static void TIM_OC5_SetConfig(TIM_TypeDef *TIMx, - const TIM_OC_InitTypeDef *OC_Config) -{ - uint32_t tmpccmrx; - uint32_t tmpccer; - uint32_t tmpcr2; - - /* Disable the output: Reset the CCxE Bit */ - TIMx->CCER &= ~TIM_CCER_CC5E; - - /* Get the TIMx CCER register value */ - tmpccer = TIMx->CCER; - /* Get the TIMx CR2 register value */ - tmpcr2 = TIMx->CR2; - /* Get the TIMx CCMR1 register value */ - tmpccmrx = TIMx->CCMR3; - - /* Reset the Output Compare Mode Bits */ - tmpccmrx &= ~(TIM_CCMR3_OC5M); - /* Select the Output Compare Mode */ - tmpccmrx |= OC_Config->OCMode; - - /* Reset the Output Polarity level */ - tmpccer &= ~TIM_CCER_CC5P; - /* Set the Output Compare Polarity */ - tmpccer |= (OC_Config->OCPolarity << 16U); - - if (IS_TIM_BREAK_INSTANCE(TIMx)) - { - /* Reset the Output Compare IDLE State */ - tmpcr2 &= ~TIM_CR2_OIS5; - /* Set the Output Idle state */ - tmpcr2 |= (OC_Config->OCIdleState << 8U); - } - /* Write to TIMx CR2 */ - TIMx->CR2 = tmpcr2; - - /* Write to TIMx CCMR3 */ - TIMx->CCMR3 = tmpccmrx; - - /* Set the Capture Compare Register value */ - TIMx->CCR5 = OC_Config->Pulse; - - /* Write to TIMx CCER */ - TIMx->CCER = tmpccer; -} - -/** - * @brief Timer Output Compare 6 configuration - * @param TIMx to select the TIM peripheral - * @param OC_Config The output configuration structure - * @retval None - */ -static void TIM_OC6_SetConfig(TIM_TypeDef *TIMx, - const TIM_OC_InitTypeDef *OC_Config) -{ - uint32_t tmpccmrx; - uint32_t tmpccer; - uint32_t tmpcr2; - - /* Disable the output: Reset the CCxE Bit */ - TIMx->CCER &= ~TIM_CCER_CC6E; - - /* Get the TIMx CCER register value */ - tmpccer = TIMx->CCER; - /* Get the TIMx CR2 register value */ - tmpcr2 = TIMx->CR2; - /* Get the TIMx CCMR1 register value */ - tmpccmrx = TIMx->CCMR3; - - /* Reset the Output Compare Mode Bits */ - tmpccmrx &= ~(TIM_CCMR3_OC6M); - /* Select the Output Compare Mode */ - tmpccmrx |= (OC_Config->OCMode << 8U); - - /* Reset the Output Polarity level */ - tmpccer &= (uint32_t)~TIM_CCER_CC6P; - /* Set the Output Compare Polarity */ - tmpccer |= (OC_Config->OCPolarity << 20U); - - if (IS_TIM_BREAK_INSTANCE(TIMx)) - { - /* Reset the Output Compare IDLE State */ - tmpcr2 &= ~TIM_CR2_OIS6; - /* Set the Output Idle state */ - tmpcr2 |= (OC_Config->OCIdleState << 10U); - } - - /* Write to TIMx CR2 */ - TIMx->CR2 = tmpcr2; - - /* Write to TIMx CCMR3 */ - TIMx->CCMR3 = tmpccmrx; - - /* Set the Capture Compare Register value */ - TIMx->CCR6 = OC_Config->Pulse; - - /* Write to TIMx CCER */ - TIMx->CCER = tmpccer; -} - -/** - * @brief Slave Timer configuration function - * @param htim TIM handle - * @param sSlaveConfig Slave timer configuration - * @retval None - */ -static HAL_StatusTypeDef TIM_SlaveTimer_SetConfig(TIM_HandleTypeDef *htim, - const TIM_SlaveConfigTypeDef *sSlaveConfig) -{ - HAL_StatusTypeDef status = HAL_OK; - uint32_t tmpsmcr; - uint32_t tmpccmr1; - uint32_t tmpccer; - - /* Get the TIMx SMCR register value */ - tmpsmcr = htim->Instance->SMCR; - - /* Reset the Trigger Selection Bits */ - tmpsmcr &= ~TIM_SMCR_TS; - /* Set the Input Trigger source */ - tmpsmcr |= sSlaveConfig->InputTrigger; - - /* Reset the slave mode Bits */ - tmpsmcr &= ~TIM_SMCR_SMS; - /* Set the slave mode */ - tmpsmcr |= sSlaveConfig->SlaveMode; - - /* Write to TIMx SMCR */ - htim->Instance->SMCR = tmpsmcr; - - /* Configure the trigger prescaler, filter, and polarity */ - switch (sSlaveConfig->InputTrigger) - { - case TIM_TS_ETRF: - { - /* Check the parameters */ - assert_param(IS_TIM_CLOCKSOURCE_ETRMODE1_INSTANCE(htim->Instance)); - assert_param(IS_TIM_TRIGGERPRESCALER(sSlaveConfig->TriggerPrescaler)); - assert_param(IS_TIM_TRIGGERPOLARITY(sSlaveConfig->TriggerPolarity)); - assert_param(IS_TIM_TRIGGERFILTER(sSlaveConfig->TriggerFilter)); - /* Configure the ETR Trigger source */ - TIM_ETR_SetConfig(htim->Instance, - sSlaveConfig->TriggerPrescaler, - sSlaveConfig->TriggerPolarity, - sSlaveConfig->TriggerFilter); - break; - } - - case TIM_TS_TI1F_ED: - { - /* Check the parameters */ - assert_param(IS_TIM_CC1_INSTANCE(htim->Instance)); - assert_param(IS_TIM_TRIGGERFILTER(sSlaveConfig->TriggerFilter)); - - if (sSlaveConfig->SlaveMode == TIM_SLAVEMODE_GATED) - { - return HAL_ERROR; - } - - /* Disable the Channel 1: Reset the CC1E Bit */ - tmpccer = htim->Instance->CCER; - htim->Instance->CCER &= ~TIM_CCER_CC1E; - tmpccmr1 = htim->Instance->CCMR1; - - /* Set the filter */ - tmpccmr1 &= ~TIM_CCMR1_IC1F; - tmpccmr1 |= ((sSlaveConfig->TriggerFilter) << 4U); - - /* Write to TIMx CCMR1 and CCER registers */ - htim->Instance->CCMR1 = tmpccmr1; - htim->Instance->CCER = tmpccer; - break; - } - - case TIM_TS_TI1FP1: - { - /* Check the parameters */ - assert_param(IS_TIM_CC1_INSTANCE(htim->Instance)); - assert_param(IS_TIM_TRIGGERPOLARITY(sSlaveConfig->TriggerPolarity)); - assert_param(IS_TIM_TRIGGERFILTER(sSlaveConfig->TriggerFilter)); - - /* Configure TI1 Filter and Polarity */ - TIM_TI1_ConfigInputStage(htim->Instance, - sSlaveConfig->TriggerPolarity, - sSlaveConfig->TriggerFilter); - break; - } - - case TIM_TS_TI2FP2: - { - /* Check the parameters */ - assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); - assert_param(IS_TIM_TRIGGERPOLARITY(sSlaveConfig->TriggerPolarity)); - assert_param(IS_TIM_TRIGGERFILTER(sSlaveConfig->TriggerFilter)); - - /* Configure TI2 Filter and Polarity */ - TIM_TI2_ConfigInputStage(htim->Instance, - sSlaveConfig->TriggerPolarity, - sSlaveConfig->TriggerFilter); - break; - } - - case TIM_TS_ITR0: - case TIM_TS_ITR1: - case TIM_TS_ITR2: - case TIM_TS_ITR3: - { - /* Check the parameter */ - assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); - break; - } - - default: - status = HAL_ERROR; - break; - } - - return status; -} - -/** - * @brief Configure the TI1 as Input. - * @param TIMx to select the TIM peripheral. - * @param TIM_ICPolarity The Input Polarity. - * This parameter can be one of the following values: - * @arg TIM_ICPOLARITY_RISING - * @arg TIM_ICPOLARITY_FALLING - * @arg TIM_ICPOLARITY_BOTHEDGE - * @param TIM_ICSelection specifies the input to be used. - * This parameter can be one of the following values: - * @arg TIM_ICSELECTION_DIRECTTI: TIM Input 1 is selected to be connected to IC1. - * @arg TIM_ICSELECTION_INDIRECTTI: TIM Input 1 is selected to be connected to IC2. - * @arg TIM_ICSELECTION_TRC: TIM Input 1 is selected to be connected to TRC. - * @param TIM_ICFilter Specifies the Input Capture Filter. - * This parameter must be a value between 0x00 and 0x0F. - * @retval None - * @note TIM_ICFilter and TIM_ICPolarity are not used in INDIRECT mode as TI2FP1 - * (on channel2 path) is used as the input signal. Therefore CCMR1 must be - * protected against un-initialized filter and polarity values. - */ -void TIM_TI1_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, - uint32_t TIM_ICFilter) -{ - uint32_t tmpccmr1; - uint32_t tmpccer; - - /* Disable the Channel 1: Reset the CC1E Bit */ - TIMx->CCER &= ~TIM_CCER_CC1E; - tmpccmr1 = TIMx->CCMR1; - tmpccer = TIMx->CCER; - - /* Select the Input */ - if (IS_TIM_CC2_INSTANCE(TIMx) != RESET) - { - tmpccmr1 &= ~TIM_CCMR1_CC1S; - tmpccmr1 |= TIM_ICSelection; - } - else - { - tmpccmr1 |= TIM_CCMR1_CC1S_0; - } - - /* Set the filter */ - tmpccmr1 &= ~TIM_CCMR1_IC1F; - tmpccmr1 |= ((TIM_ICFilter << 4U) & TIM_CCMR1_IC1F); - - /* Select the Polarity and set the CC1E Bit */ - tmpccer &= ~(TIM_CCER_CC1P | TIM_CCER_CC1NP); - tmpccer |= (TIM_ICPolarity & (TIM_CCER_CC1P | TIM_CCER_CC1NP)); - - /* Write to TIMx CCMR1 and CCER registers */ - TIMx->CCMR1 = tmpccmr1; - TIMx->CCER = tmpccer; -} - -/** - * @brief Configure the Polarity and Filter for TI1. - * @param TIMx to select the TIM peripheral. - * @param TIM_ICPolarity The Input Polarity. - * This parameter can be one of the following values: - * @arg TIM_ICPOLARITY_RISING - * @arg TIM_ICPOLARITY_FALLING - * @arg TIM_ICPOLARITY_BOTHEDGE - * @param TIM_ICFilter Specifies the Input Capture Filter. - * This parameter must be a value between 0x00 and 0x0F. - * @retval None - */ -static void TIM_TI1_ConfigInputStage(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICFilter) -{ - uint32_t tmpccmr1; - uint32_t tmpccer; - - /* Disable the Channel 1: Reset the CC1E Bit */ - tmpccer = TIMx->CCER; - TIMx->CCER &= ~TIM_CCER_CC1E; - tmpccmr1 = TIMx->CCMR1; - - /* Set the filter */ - tmpccmr1 &= ~TIM_CCMR1_IC1F; - tmpccmr1 |= (TIM_ICFilter << 4U); - - /* Select the Polarity and set the CC1E Bit */ - tmpccer &= ~(TIM_CCER_CC1P | TIM_CCER_CC1NP); - tmpccer |= TIM_ICPolarity; - - /* Write to TIMx CCMR1 and CCER registers */ - TIMx->CCMR1 = tmpccmr1; - TIMx->CCER = tmpccer; -} - -/** - * @brief Configure the TI2 as Input. - * @param TIMx to select the TIM peripheral - * @param TIM_ICPolarity The Input Polarity. - * This parameter can be one of the following values: - * @arg TIM_ICPOLARITY_RISING - * @arg TIM_ICPOLARITY_FALLING - * @arg TIM_ICPOLARITY_BOTHEDGE - * @param TIM_ICSelection specifies the input to be used. - * This parameter can be one of the following values: - * @arg TIM_ICSELECTION_DIRECTTI: TIM Input 2 is selected to be connected to IC2. - * @arg TIM_ICSELECTION_INDIRECTTI: TIM Input 2 is selected to be connected to IC1. - * @arg TIM_ICSELECTION_TRC: TIM Input 2 is selected to be connected to TRC. - * @param TIM_ICFilter Specifies the Input Capture Filter. - * This parameter must be a value between 0x00 and 0x0F. - * @retval None - * @note TIM_ICFilter and TIM_ICPolarity are not used in INDIRECT mode as TI1FP2 - * (on channel1 path) is used as the input signal. Therefore CCMR1 must be - * protected against un-initialized filter and polarity values. - */ -static void TIM_TI2_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, - uint32_t TIM_ICFilter) -{ - uint32_t tmpccmr1; - uint32_t tmpccer; - - /* Disable the Channel 2: Reset the CC2E Bit */ - TIMx->CCER &= ~TIM_CCER_CC2E; - tmpccmr1 = TIMx->CCMR1; - tmpccer = TIMx->CCER; - - /* Select the Input */ - tmpccmr1 &= ~TIM_CCMR1_CC2S; - tmpccmr1 |= (TIM_ICSelection << 8U); - - /* Set the filter */ - tmpccmr1 &= ~TIM_CCMR1_IC2F; - tmpccmr1 |= ((TIM_ICFilter << 12U) & TIM_CCMR1_IC2F); - - /* Select the Polarity and set the CC2E Bit */ - tmpccer &= ~(TIM_CCER_CC2P | TIM_CCER_CC2NP); - tmpccer |= ((TIM_ICPolarity << 4U) & (TIM_CCER_CC2P | TIM_CCER_CC2NP)); - - /* Write to TIMx CCMR1 and CCER registers */ - TIMx->CCMR1 = tmpccmr1 ; - TIMx->CCER = tmpccer; -} - -/** - * @brief Configure the Polarity and Filter for TI2. - * @param TIMx to select the TIM peripheral. - * @param TIM_ICPolarity The Input Polarity. - * This parameter can be one of the following values: - * @arg TIM_ICPOLARITY_RISING - * @arg TIM_ICPOLARITY_FALLING - * @arg TIM_ICPOLARITY_BOTHEDGE - * @param TIM_ICFilter Specifies the Input Capture Filter. - * This parameter must be a value between 0x00 and 0x0F. - * @retval None - */ -static void TIM_TI2_ConfigInputStage(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICFilter) -{ - uint32_t tmpccmr1; - uint32_t tmpccer; - - /* Disable the Channel 2: Reset the CC2E Bit */ - TIMx->CCER &= ~TIM_CCER_CC2E; - tmpccmr1 = TIMx->CCMR1; - tmpccer = TIMx->CCER; - - /* Set the filter */ - tmpccmr1 &= ~TIM_CCMR1_IC2F; - tmpccmr1 |= (TIM_ICFilter << 12U); - - /* Select the Polarity and set the CC2E Bit */ - tmpccer &= ~(TIM_CCER_CC2P | TIM_CCER_CC2NP); - tmpccer |= (TIM_ICPolarity << 4U); - - /* Write to TIMx CCMR1 and CCER registers */ - TIMx->CCMR1 = tmpccmr1 ; - TIMx->CCER = tmpccer; -} - -/** - * @brief Configure the TI3 as Input. - * @param TIMx to select the TIM peripheral - * @param TIM_ICPolarity The Input Polarity. - * This parameter can be one of the following values: - * @arg TIM_ICPOLARITY_RISING - * @arg TIM_ICPOLARITY_FALLING - * @arg TIM_ICPOLARITY_BOTHEDGE - * @param TIM_ICSelection specifies the input to be used. - * This parameter can be one of the following values: - * @arg TIM_ICSELECTION_DIRECTTI: TIM Input 3 is selected to be connected to IC3. - * @arg TIM_ICSELECTION_INDIRECTTI: TIM Input 3 is selected to be connected to IC4. - * @arg TIM_ICSELECTION_TRC: TIM Input 3 is selected to be connected to TRC. - * @param TIM_ICFilter Specifies the Input Capture Filter. - * This parameter must be a value between 0x00 and 0x0F. - * @retval None - * @note TIM_ICFilter and TIM_ICPolarity are not used in INDIRECT mode as TI3FP4 - * (on channel1 path) is used as the input signal. Therefore CCMR2 must be - * protected against un-initialized filter and polarity values. - */ -static void TIM_TI3_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, - uint32_t TIM_ICFilter) -{ - uint32_t tmpccmr2; - uint32_t tmpccer; - - /* Disable the Channel 3: Reset the CC3E Bit */ - TIMx->CCER &= ~TIM_CCER_CC3E; - tmpccmr2 = TIMx->CCMR2; - tmpccer = TIMx->CCER; - - /* Select the Input */ - tmpccmr2 &= ~TIM_CCMR2_CC3S; - tmpccmr2 |= TIM_ICSelection; - - /* Set the filter */ - tmpccmr2 &= ~TIM_CCMR2_IC3F; - tmpccmr2 |= ((TIM_ICFilter << 4U) & TIM_CCMR2_IC3F); - - /* Select the Polarity and set the CC3E Bit */ - tmpccer &= ~(TIM_CCER_CC3P | TIM_CCER_CC3NP); - tmpccer |= ((TIM_ICPolarity << 8U) & (TIM_CCER_CC3P | TIM_CCER_CC3NP)); - - /* Write to TIMx CCMR2 and CCER registers */ - TIMx->CCMR2 = tmpccmr2; - TIMx->CCER = tmpccer; -} - -/** - * @brief Configure the TI4 as Input. - * @param TIMx to select the TIM peripheral - * @param TIM_ICPolarity The Input Polarity. - * This parameter can be one of the following values: - * @arg TIM_ICPOLARITY_RISING - * @arg TIM_ICPOLARITY_FALLING - * @arg TIM_ICPOLARITY_BOTHEDGE - * @param TIM_ICSelection specifies the input to be used. - * This parameter can be one of the following values: - * @arg TIM_ICSELECTION_DIRECTTI: TIM Input 4 is selected to be connected to IC4. - * @arg TIM_ICSELECTION_INDIRECTTI: TIM Input 4 is selected to be connected to IC3. - * @arg TIM_ICSELECTION_TRC: TIM Input 4 is selected to be connected to TRC. - * @param TIM_ICFilter Specifies the Input Capture Filter. - * This parameter must be a value between 0x00 and 0x0F. - * @note TIM_ICFilter and TIM_ICPolarity are not used in INDIRECT mode as TI4FP3 - * (on channel1 path) is used as the input signal. Therefore CCMR2 must be - * protected against un-initialized filter and polarity values. - * @retval None - */ -static void TIM_TI4_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, - uint32_t TIM_ICFilter) -{ - uint32_t tmpccmr2; - uint32_t tmpccer; - - /* Disable the Channel 4: Reset the CC4E Bit */ - TIMx->CCER &= ~TIM_CCER_CC4E; - tmpccmr2 = TIMx->CCMR2; - tmpccer = TIMx->CCER; - - /* Select the Input */ - tmpccmr2 &= ~TIM_CCMR2_CC4S; - tmpccmr2 |= (TIM_ICSelection << 8U); - - /* Set the filter */ - tmpccmr2 &= ~TIM_CCMR2_IC4F; - tmpccmr2 |= ((TIM_ICFilter << 12U) & TIM_CCMR2_IC4F); - - /* Select the Polarity and set the CC4E Bit */ - tmpccer &= ~(TIM_CCER_CC4P | TIM_CCER_CC4NP); - tmpccer |= ((TIM_ICPolarity << 12U) & (TIM_CCER_CC4P | TIM_CCER_CC4NP)); - - /* Write to TIMx CCMR2 and CCER registers */ - TIMx->CCMR2 = tmpccmr2; - TIMx->CCER = tmpccer ; -} - -/** - * @brief Selects the Input Trigger source - * @param TIMx to select the TIM peripheral - * @param InputTriggerSource The Input Trigger source. - * This parameter can be one of the following values: - * @arg TIM_TS_ITR0: Internal Trigger 0 - * @arg TIM_TS_ITR1: Internal Trigger 1 - * @arg TIM_TS_ITR2: Internal Trigger 2 - * @arg TIM_TS_ITR3: Internal Trigger 3 - * @arg TIM_TS_TI1F_ED: TI1 Edge Detector - * @arg TIM_TS_TI1FP1: Filtered Timer Input 1 - * @arg TIM_TS_TI2FP2: Filtered Timer Input 2 - * @arg TIM_TS_ETRF: External Trigger input - * @retval None - */ -static void TIM_ITRx_SetConfig(TIM_TypeDef *TIMx, uint32_t InputTriggerSource) -{ - uint32_t tmpsmcr; - - /* Get the TIMx SMCR register value */ - tmpsmcr = TIMx->SMCR; - /* Reset the TS Bits */ - tmpsmcr &= ~TIM_SMCR_TS; - /* Set the Input Trigger source and the slave mode*/ - tmpsmcr |= (InputTriggerSource | TIM_SLAVEMODE_EXTERNAL1); - /* Write to TIMx SMCR */ - TIMx->SMCR = tmpsmcr; -} -/** - * @brief Configures the TIMx External Trigger (ETR). - * @param TIMx to select the TIM peripheral - * @param TIM_ExtTRGPrescaler The external Trigger Prescaler. - * This parameter can be one of the following values: - * @arg TIM_ETRPRESCALER_DIV1: ETRP Prescaler OFF. - * @arg TIM_ETRPRESCALER_DIV2: ETRP frequency divided by 2. - * @arg TIM_ETRPRESCALER_DIV4: ETRP frequency divided by 4. - * @arg TIM_ETRPRESCALER_DIV8: ETRP frequency divided by 8. - * @param TIM_ExtTRGPolarity The external Trigger Polarity. - * This parameter can be one of the following values: - * @arg TIM_ETRPOLARITY_INVERTED: active low or falling edge active. - * @arg TIM_ETRPOLARITY_NONINVERTED: active high or rising edge active. - * @param ExtTRGFilter External Trigger Filter. - * This parameter must be a value between 0x00 and 0x0F - * @retval None - */ -void TIM_ETR_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ExtTRGPrescaler, - uint32_t TIM_ExtTRGPolarity, uint32_t ExtTRGFilter) -{ - uint32_t tmpsmcr; - - tmpsmcr = TIMx->SMCR; - - /* Reset the ETR Bits */ - tmpsmcr &= ~(TIM_SMCR_ETF | TIM_SMCR_ETPS | TIM_SMCR_ECE | TIM_SMCR_ETP); - - /* Set the Prescaler, the Filter value and the Polarity */ - tmpsmcr |= (uint32_t)(TIM_ExtTRGPrescaler | (TIM_ExtTRGPolarity | (ExtTRGFilter << 8U))); - - /* Write to TIMx SMCR */ - TIMx->SMCR = tmpsmcr; -} - -/** - * @brief Enables or disables the TIM Capture Compare Channel x. - * @param TIMx to select the TIM peripheral - * @param Channel specifies the TIM Channel - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 - * @arg TIM_CHANNEL_2: TIM Channel 2 - * @arg TIM_CHANNEL_3: TIM Channel 3 - * @arg TIM_CHANNEL_4: TIM Channel 4 - * @arg TIM_CHANNEL_5: TIM Channel 5 selected - * @arg TIM_CHANNEL_6: TIM Channel 6 selected - * @param ChannelState specifies the TIM Channel CCxE bit new state. - * This parameter can be: TIM_CCx_ENABLE or TIM_CCx_DISABLE. - * @retval None - */ -void TIM_CCxChannelCmd(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t ChannelState) -{ - uint32_t tmp; - - /* Check the parameters */ - assert_param(IS_TIM_CC1_INSTANCE(TIMx)); - assert_param(IS_TIM_CHANNELS(Channel)); - - tmp = TIM_CCER_CC1E << (Channel & 0x1FU); /* 0x1FU = 31 bits max shift */ - - /* Reset the CCxE Bit */ - TIMx->CCER &= ~tmp; - - /* Set or reset the CCxE Bit */ - TIMx->CCER |= (uint32_t)(ChannelState << (Channel & 0x1FU)); /* 0x1FU = 31 bits max shift */ -} - -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) -/** - * @brief Reset interrupt callbacks to the legacy weak callbacks. - * @param htim pointer to a TIM_HandleTypeDef structure that contains - * the configuration information for TIM module. - * @retval None - */ -void TIM_ResetCallback(TIM_HandleTypeDef *htim) -{ - /* Reset the TIM callback to the legacy weak callbacks */ - htim->PeriodElapsedCallback = HAL_TIM_PeriodElapsedCallback; - htim->PeriodElapsedHalfCpltCallback = HAL_TIM_PeriodElapsedHalfCpltCallback; - htim->TriggerCallback = HAL_TIM_TriggerCallback; - htim->TriggerHalfCpltCallback = HAL_TIM_TriggerHalfCpltCallback; - htim->IC_CaptureCallback = HAL_TIM_IC_CaptureCallback; - htim->IC_CaptureHalfCpltCallback = HAL_TIM_IC_CaptureHalfCpltCallback; - htim->OC_DelayElapsedCallback = HAL_TIM_OC_DelayElapsedCallback; - htim->PWM_PulseFinishedCallback = HAL_TIM_PWM_PulseFinishedCallback; - htim->PWM_PulseFinishedHalfCpltCallback = HAL_TIM_PWM_PulseFinishedHalfCpltCallback; - htim->ErrorCallback = HAL_TIM_ErrorCallback; - htim->CommutationCallback = HAL_TIMEx_CommutCallback; - htim->CommutationHalfCpltCallback = HAL_TIMEx_CommutHalfCpltCallback; - htim->BreakCallback = HAL_TIMEx_BreakCallback; - htim->Break2Callback = HAL_TIMEx_Break2Callback; -} -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ - -/** - * @} - */ - -#endif /* HAL_TIM_MODULE_ENABLED */ -/** - * @} - */ - -/** - * @} - */ +/** + ****************************************************************************** + * @file stm32l4xx_hal_tim.c + * @author MCD Application Team + * @brief TIM HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Timer (TIM) peripheral: + * + TIM Time Base Initialization + * + TIM Time Base Start + * + TIM Time Base Start Interruption + * + TIM Time Base Start DMA + * + TIM Output Compare/PWM Initialization + * + TIM Output Compare/PWM Channel Configuration + * + TIM Output Compare/PWM Start + * + TIM Output Compare/PWM Start Interruption + * + TIM Output Compare/PWM Start DMA + * + TIM Input Capture Initialization + * + TIM Input Capture Channel Configuration + * + TIM Input Capture Start + * + TIM Input Capture Start Interruption + * + TIM Input Capture Start DMA + * + TIM One Pulse Initialization + * + TIM One Pulse Channel Configuration + * + TIM One Pulse Start + * + TIM Encoder Interface Initialization + * + TIM Encoder Interface Start + * + TIM Encoder Interface Start Interruption + * + TIM Encoder Interface Start DMA + * + Commutation Event configuration with Interruption and DMA + * + TIM OCRef clear configuration + * + TIM External Clock configuration + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### TIMER Generic features ##### + ============================================================================== + [..] The Timer features include: + (#) 16-bit up, down, up/down auto-reload counter. + (#) 16-bit programmable prescaler allowing dividing (also on the fly) the + counter clock frequency either by any factor between 1 and 65536. + (#) Up to 4 independent channels for: + (++) Input Capture + (++) Output Compare + (++) PWM generation (Edge and Center-aligned Mode) + (++) One-pulse mode output + (#) Synchronization circuit to control the timer with external signals and to interconnect + several timers together. + (#) Supports incremental encoder for positioning purposes + + ##### How to use this driver ##### + ============================================================================== + [..] + (#) Initialize the TIM low level resources by implementing the following functions + depending on the selected feature: + (++) Time Base : HAL_TIM_Base_MspInit() + (++) Input Capture : HAL_TIM_IC_MspInit() + (++) Output Compare : HAL_TIM_OC_MspInit() + (++) PWM generation : HAL_TIM_PWM_MspInit() + (++) One-pulse mode output : HAL_TIM_OnePulse_MspInit() + (++) Encoder mode output : HAL_TIM_Encoder_MspInit() + + (#) Initialize the TIM low level resources : + (##) Enable the TIM interface clock using __HAL_RCC_TIMx_CLK_ENABLE(); + (##) TIM pins configuration + (+++) Enable the clock for the TIM GPIOs using the following function: + __HAL_RCC_GPIOx_CLK_ENABLE(); + (+++) Configure these TIM pins in Alternate function mode using HAL_GPIO_Init(); + + (#) The external Clock can be configured, if needed (the default clock is the + internal clock from the APBx), using the following function: + HAL_TIM_ConfigClockSource, the clock configuration should be done before + any start function. + + (#) Configure the TIM in the desired functioning mode using one of the + Initialization function of this driver: + (++) HAL_TIM_Base_Init: to use the Timer to generate a simple time base + (++) HAL_TIM_OC_Init and HAL_TIM_OC_ConfigChannel: to use the Timer to generate an + Output Compare signal. + (++) HAL_TIM_PWM_Init and HAL_TIM_PWM_ConfigChannel: to use the Timer to generate a + PWM signal. + (++) HAL_TIM_IC_Init and HAL_TIM_IC_ConfigChannel: to use the Timer to measure an + external signal. + (++) HAL_TIM_OnePulse_Init and HAL_TIM_OnePulse_ConfigChannel: to use the Timer + in One Pulse Mode. + (++) HAL_TIM_Encoder_Init: to use the Timer Encoder Interface. + + (#) Activate the TIM peripheral using one of the start functions depending from the feature used: + (++) Time Base : HAL_TIM_Base_Start(), HAL_TIM_Base_Start_DMA(), HAL_TIM_Base_Start_IT() + (++) Input Capture : HAL_TIM_IC_Start(), HAL_TIM_IC_Start_DMA(), HAL_TIM_IC_Start_IT() + (++) Output Compare : HAL_TIM_OC_Start(), HAL_TIM_OC_Start_DMA(), HAL_TIM_OC_Start_IT() + (++) PWM generation : HAL_TIM_PWM_Start(), HAL_TIM_PWM_Start_DMA(), HAL_TIM_PWM_Start_IT() + (++) One-pulse mode output : HAL_TIM_OnePulse_Start(), HAL_TIM_OnePulse_Start_IT() + (++) Encoder mode output : HAL_TIM_Encoder_Start(), HAL_TIM_Encoder_Start_DMA(), HAL_TIM_Encoder_Start_IT(). + + (#) The DMA Burst is managed with the two following functions: + HAL_TIM_DMABurst_WriteStart() + HAL_TIM_DMABurst_ReadStart() + + *** Callback registration *** + ============================================= + + [..] + The compilation define USE_HAL_TIM_REGISTER_CALLBACKS when set to 1 + allows the user to configure dynamically the driver callbacks. + + [..] + Use Function HAL_TIM_RegisterCallback() to register a callback. + HAL_TIM_RegisterCallback() takes as parameters the HAL peripheral handle, + the Callback ID and a pointer to the user callback function. + + [..] + Use function HAL_TIM_UnRegisterCallback() to reset a callback to the default + weak function. + HAL_TIM_UnRegisterCallback takes as parameters the HAL peripheral handle, + and the Callback ID. + + [..] + These functions allow to register/unregister following callbacks: + (+) Base_MspInitCallback : TIM Base Msp Init Callback. + (+) Base_MspDeInitCallback : TIM Base Msp DeInit Callback. + (+) IC_MspInitCallback : TIM IC Msp Init Callback. + (+) IC_MspDeInitCallback : TIM IC Msp DeInit Callback. + (+) OC_MspInitCallback : TIM OC Msp Init Callback. + (+) OC_MspDeInitCallback : TIM OC Msp DeInit Callback. + (+) PWM_MspInitCallback : TIM PWM Msp Init Callback. + (+) PWM_MspDeInitCallback : TIM PWM Msp DeInit Callback. + (+) OnePulse_MspInitCallback : TIM One Pulse Msp Init Callback. + (+) OnePulse_MspDeInitCallback : TIM One Pulse Msp DeInit Callback. + (+) Encoder_MspInitCallback : TIM Encoder Msp Init Callback. + (+) Encoder_MspDeInitCallback : TIM Encoder Msp DeInit Callback. + (+) HallSensor_MspInitCallback : TIM Hall Sensor Msp Init Callback. + (+) HallSensor_MspDeInitCallback : TIM Hall Sensor Msp DeInit Callback. + (+) PeriodElapsedCallback : TIM Period Elapsed Callback. + (+) PeriodElapsedHalfCpltCallback : TIM Period Elapsed half complete Callback. + (+) TriggerCallback : TIM Trigger Callback. + (+) TriggerHalfCpltCallback : TIM Trigger half complete Callback. + (+) IC_CaptureCallback : TIM Input Capture Callback. + (+) IC_CaptureHalfCpltCallback : TIM Input Capture half complete Callback. + (+) OC_DelayElapsedCallback : TIM Output Compare Delay Elapsed Callback. + (+) PWM_PulseFinishedCallback : TIM PWM Pulse Finished Callback. + (+) PWM_PulseFinishedHalfCpltCallback : TIM PWM Pulse Finished half complete Callback. + (+) ErrorCallback : TIM Error Callback. + (+) CommutationCallback : TIM Commutation Callback. + (+) CommutationHalfCpltCallback : TIM Commutation half complete Callback. + (+) BreakCallback : TIM Break Callback. + (+) Break2Callback : TIM Break2 Callback. + + [..] +By default, after the Init and when the state is HAL_TIM_STATE_RESET +all interrupt callbacks are set to the corresponding weak functions: + examples HAL_TIM_TriggerCallback(), HAL_TIM_ErrorCallback(). + + [..] + Exception done for MspInit and MspDeInit functions that are reset to the legacy weak + functionalities in the Init / DeInit only when these callbacks are null + (not registered beforehand). If not, MspInit or MspDeInit are not null, the Init / DeInit + keep and use the user MspInit / MspDeInit callbacks(registered beforehand) + + [..] + Callbacks can be registered / unregistered in HAL_TIM_STATE_READY state only. + Exception done MspInit / MspDeInit that can be registered / unregistered + in HAL_TIM_STATE_READY or HAL_TIM_STATE_RESET state, + thus registered(user) MspInit / DeInit callbacks can be used during the Init / DeInit. + In that case first register the MspInit/MspDeInit user callbacks + using HAL_TIM_RegisterCallback() before calling DeInit or Init function. + + [..] + When The compilation define USE_HAL_TIM_REGISTER_CALLBACKS is set to 0 or + not defined, the callback registration feature is not available and all callbacks + are set to the corresponding weak functions. + + @endverbatim + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l4xx_hal.h" + +/** @addtogroup STM32L4xx_HAL_Driver + * @{ + */ + +/** @defgroup TIM TIM + * @brief TIM HAL module driver + * @{ + */ + +#ifdef HAL_TIM_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/** @addtogroup TIM_Private_Functions + * @{ + */ +static void TIM_OC1_SetConfig(TIM_TypeDef *TIMx, const TIM_OC_InitTypeDef *OC_Config); +static void TIM_OC3_SetConfig(TIM_TypeDef *TIMx, const TIM_OC_InitTypeDef *OC_Config); +static void TIM_OC4_SetConfig(TIM_TypeDef *TIMx, const TIM_OC_InitTypeDef *OC_Config); +static void TIM_OC5_SetConfig(TIM_TypeDef *TIMx, const TIM_OC_InitTypeDef *OC_Config); +static void TIM_OC6_SetConfig(TIM_TypeDef *TIMx, const TIM_OC_InitTypeDef *OC_Config); +static void TIM_TI1_ConfigInputStage(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICFilter); +static void TIM_TI2_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, + uint32_t TIM_ICFilter); +static void TIM_TI2_ConfigInputStage(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICFilter); +static void TIM_TI3_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, + uint32_t TIM_ICFilter); +static void TIM_TI4_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, + uint32_t TIM_ICFilter); +static void TIM_ITRx_SetConfig(TIM_TypeDef *TIMx, uint32_t InputTriggerSource); +static void TIM_DMAPeriodElapsedCplt(DMA_HandleTypeDef *hdma); +static void TIM_DMAPeriodElapsedHalfCplt(DMA_HandleTypeDef *hdma); +static void TIM_DMADelayPulseCplt(DMA_HandleTypeDef *hdma); +static void TIM_DMATriggerCplt(DMA_HandleTypeDef *hdma); +static void TIM_DMATriggerHalfCplt(DMA_HandleTypeDef *hdma); +static HAL_StatusTypeDef TIM_SlaveTimer_SetConfig(TIM_HandleTypeDef *htim, + const TIM_SlaveConfigTypeDef *sSlaveConfig); +/** + * @} + */ +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup TIM_Exported_Functions TIM Exported Functions + * @{ + */ + +/** @defgroup TIM_Exported_Functions_Group1 TIM Time Base functions + * @brief Time Base functions + * +@verbatim + ============================================================================== + ##### Time Base functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+) Initialize and configure the TIM base. + (+) De-initialize the TIM base. + (+) Start the Time Base. + (+) Stop the Time Base. + (+) Start the Time Base and enable interrupt. + (+) Stop the Time Base and disable interrupt. + (+) Start the Time Base and enable DMA transfer. + (+) Stop the Time Base and disable DMA transfer. + +@endverbatim + * @{ + */ +/** + * @brief Initializes the TIM Time base Unit according to the specified + * parameters in the TIM_HandleTypeDef and initialize the associated handle. + * @note Switching from Center Aligned counter mode to Edge counter mode (or reverse) + * requires a timer reset to avoid unexpected direction + * due to DIR bit readonly in center aligned mode. + * Ex: call @ref HAL_TIM_Base_DeInit() before HAL_TIM_Base_Init() + * @param htim TIM Base handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Base_Init(TIM_HandleTypeDef *htim) +{ + /* Check the TIM handle allocation */ + if (htim == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode)); + assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision)); + assert_param(IS_TIM_PERIOD(htim, htim->Init.Period)); + assert_param(IS_TIM_AUTORELOAD_PRELOAD(htim->Init.AutoReloadPreload)); + + if (htim->State == HAL_TIM_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + htim->Lock = HAL_UNLOCKED; + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + /* Reset interrupt callbacks to legacy weak callbacks */ + TIM_ResetCallback(htim); + + if (htim->Base_MspInitCallback == NULL) + { + htim->Base_MspInitCallback = HAL_TIM_Base_MspInit; + } + /* Init the low level hardware : GPIO, CLOCK, NVIC */ + htim->Base_MspInitCallback(htim); +#else + /* Init the low level hardware : GPIO, CLOCK, NVIC */ + HAL_TIM_Base_MspInit(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + + /* Set the TIM state */ + htim->State = HAL_TIM_STATE_BUSY; + + /* Set the Time Base configuration */ + TIM_Base_SetConfig(htim->Instance, &htim->Init); + + /* Initialize the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_READY; + + /* Initialize the TIM channels state */ + TIM_CHANNEL_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_READY); + + /* Initialize the TIM state*/ + htim->State = HAL_TIM_STATE_READY; + + return HAL_OK; +} + +/** + * @brief DeInitializes the TIM Base peripheral + * @param htim TIM Base handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Base_DeInit(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + + htim->State = HAL_TIM_STATE_BUSY; + + /* Disable the TIM Peripheral Clock */ + __HAL_TIM_DISABLE(htim); + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + if (htim->Base_MspDeInitCallback == NULL) + { + htim->Base_MspDeInitCallback = HAL_TIM_Base_MspDeInit; + } + /* DeInit the low level hardware */ + htim->Base_MspDeInitCallback(htim); +#else + /* DeInit the low level hardware: GPIO, CLOCK, NVIC */ + HAL_TIM_Base_MspDeInit(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + + /* Change the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_RESET; + + /* Change the TIM channels state */ + TIM_CHANNEL_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_RESET); + TIM_CHANNEL_N_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_RESET); + + /* Change TIM state */ + htim->State = HAL_TIM_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Initializes the TIM Base MSP. + * @param htim TIM Base handle + * @retval None + */ +__weak void HAL_TIM_Base_MspInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_Base_MspInit could be implemented in the user file + */ +} + +/** + * @brief DeInitializes TIM Base MSP. + * @param htim TIM Base handle + * @retval None + */ +__weak void HAL_TIM_Base_MspDeInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_Base_MspDeInit could be implemented in the user file + */ +} + + +/** + * @brief Starts the TIM Base generation. + * @param htim TIM Base handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Base_Start(TIM_HandleTypeDef *htim) +{ + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + + /* Check the TIM state */ + if (htim->State != HAL_TIM_STATE_READY) + { + return HAL_ERROR; + } + + /* Set the TIM state */ + htim->State = HAL_TIM_STATE_BUSY; + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Base generation. + * @param htim TIM Base handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Base_Stop(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM state */ + htim->State = HAL_TIM_STATE_READY; + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the TIM Base generation in interrupt mode. + * @param htim TIM Base handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Base_Start_IT(TIM_HandleTypeDef *htim) +{ + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + + /* Check the TIM state */ + if (htim->State != HAL_TIM_STATE_READY) + { + return HAL_ERROR; + } + + /* Set the TIM state */ + htim->State = HAL_TIM_STATE_BUSY; + + /* Enable the TIM Update interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_UPDATE); + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Base generation in interrupt mode. + * @param htim TIM Base handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Base_Stop_IT(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + + /* Disable the TIM Update interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_UPDATE); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM state */ + htim->State = HAL_TIM_STATE_READY; + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the TIM Base generation in DMA mode. + * @param htim TIM Base handle + * @param pData The source Buffer address. + * @param Length The length of data to be transferred from memory to peripheral. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Base_Start_DMA(TIM_HandleTypeDef *htim, const uint32_t *pData, uint16_t Length) +{ + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_DMA_INSTANCE(htim->Instance)); + + /* Set the TIM state */ + if (htim->State == HAL_TIM_STATE_BUSY) + { + return HAL_BUSY; + } + else if (htim->State == HAL_TIM_STATE_READY) + { + if ((pData == NULL) || (Length == 0U)) + { + return HAL_ERROR; + } + else + { + htim->State = HAL_TIM_STATE_BUSY; + } + } + else + { + return HAL_ERROR; + } + + /* Set the DMA Period elapsed callbacks */ + htim->hdma[TIM_DMA_ID_UPDATE]->XferCpltCallback = TIM_DMAPeriodElapsedCplt; + htim->hdma[TIM_DMA_ID_UPDATE]->XferHalfCpltCallback = TIM_DMAPeriodElapsedHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_UPDATE]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_UPDATE], (uint32_t)pData, (uint32_t)&htim->Instance->ARR, + Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + + /* Enable the TIM Update DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_UPDATE); + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Base generation in DMA mode. + * @param htim TIM Base handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Base_Stop_DMA(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_DMA_INSTANCE(htim->Instance)); + + /* Disable the TIM Update DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_UPDATE); + + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_UPDATE]); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM state */ + htim->State = HAL_TIM_STATE_READY; + + /* Return function status */ + return HAL_OK; +} + +/** + * @} + */ + +/** @defgroup TIM_Exported_Functions_Group2 TIM Output Compare functions + * @brief TIM Output Compare functions + * +@verbatim + ============================================================================== + ##### TIM Output Compare functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+) Initialize and configure the TIM Output Compare. + (+) De-initialize the TIM Output Compare. + (+) Start the TIM Output Compare. + (+) Stop the TIM Output Compare. + (+) Start the TIM Output Compare and enable interrupt. + (+) Stop the TIM Output Compare and disable interrupt. + (+) Start the TIM Output Compare and enable DMA transfer. + (+) Stop the TIM Output Compare and disable DMA transfer. + +@endverbatim + * @{ + */ +/** + * @brief Initializes the TIM Output Compare according to the specified + * parameters in the TIM_HandleTypeDef and initializes the associated handle. + * @note Switching from Center Aligned counter mode to Edge counter mode (or reverse) + * requires a timer reset to avoid unexpected direction + * due to DIR bit readonly in center aligned mode. + * Ex: call @ref HAL_TIM_OC_DeInit() before HAL_TIM_OC_Init() + * @param htim TIM Output Compare handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OC_Init(TIM_HandleTypeDef *htim) +{ + /* Check the TIM handle allocation */ + if (htim == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode)); + assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision)); + assert_param(IS_TIM_PERIOD(htim, htim->Init.Period)); + assert_param(IS_TIM_AUTORELOAD_PRELOAD(htim->Init.AutoReloadPreload)); + + if (htim->State == HAL_TIM_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + htim->Lock = HAL_UNLOCKED; + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + /* Reset interrupt callbacks to legacy weak callbacks */ + TIM_ResetCallback(htim); + + if (htim->OC_MspInitCallback == NULL) + { + htim->OC_MspInitCallback = HAL_TIM_OC_MspInit; + } + /* Init the low level hardware : GPIO, CLOCK, NVIC */ + htim->OC_MspInitCallback(htim); +#else + /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */ + HAL_TIM_OC_MspInit(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + + /* Set the TIM state */ + htim->State = HAL_TIM_STATE_BUSY; + + /* Init the base time for the Output Compare */ + TIM_Base_SetConfig(htim->Instance, &htim->Init); + + /* Initialize the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_READY; + + /* Initialize the TIM channels state */ + TIM_CHANNEL_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_READY); + + /* Initialize the TIM state*/ + htim->State = HAL_TIM_STATE_READY; + + return HAL_OK; +} + +/** + * @brief DeInitializes the TIM peripheral + * @param htim TIM Output Compare handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OC_DeInit(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + + htim->State = HAL_TIM_STATE_BUSY; + + /* Disable the TIM Peripheral Clock */ + __HAL_TIM_DISABLE(htim); + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + if (htim->OC_MspDeInitCallback == NULL) + { + htim->OC_MspDeInitCallback = HAL_TIM_OC_MspDeInit; + } + /* DeInit the low level hardware */ + htim->OC_MspDeInitCallback(htim); +#else + /* DeInit the low level hardware: GPIO, CLOCK, NVIC and DMA */ + HAL_TIM_OC_MspDeInit(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + + /* Change the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_RESET; + + /* Change the TIM channels state */ + TIM_CHANNEL_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_RESET); + TIM_CHANNEL_N_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_RESET); + + /* Change TIM state */ + htim->State = HAL_TIM_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Initializes the TIM Output Compare MSP. + * @param htim TIM Output Compare handle + * @retval None + */ +__weak void HAL_TIM_OC_MspInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_OC_MspInit could be implemented in the user file + */ +} + +/** + * @brief DeInitializes TIM Output Compare MSP. + * @param htim TIM Output Compare handle + * @retval None + */ +__weak void HAL_TIM_OC_MspDeInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_OC_MspDeInit could be implemented in the user file + */ +} + +/** + * @brief Starts the TIM Output Compare signal generation. + * @param htim TIM Output Compare handle + * @param Channel TIM Channel to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @arg TIM_CHANNEL_5: TIM Channel 5 selected + * @arg TIM_CHANNEL_6: TIM Channel 6 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OC_Start(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + /* Check the TIM channel state */ + if (TIM_CHANNEL_STATE_GET(htim, Channel) != HAL_TIM_CHANNEL_STATE_READY) + { + return HAL_ERROR; + } + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + + /* Enable the Output compare channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Enable the main output */ + __HAL_TIM_MOE_ENABLE(htim); + } + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Output Compare signal generation. + * @param htim TIM Output Compare handle + * @param Channel TIM Channel to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @arg TIM_CHANNEL_5: TIM Channel 5 selected + * @arg TIM_CHANNEL_6: TIM Channel 6 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OC_Stop(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + /* Disable the Output compare channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + } + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the TIM Output Compare signal generation in interrupt mode. + * @param htim TIM Output Compare handle + * @param Channel TIM Channel to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OC_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_CCX_CHANNEL(htim->Instance, Channel)); + + /* Check the TIM channel state */ + if (TIM_CHANNEL_STATE_GET(htim, Channel) != HAL_TIM_CHANNEL_STATE_READY) + { + return HAL_ERROR; + } + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Enable the TIM Capture/Compare 1 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Enable the TIM Capture/Compare 2 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Enable the TIM Capture/Compare 3 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC3); + break; + } + + case TIM_CHANNEL_4: + { + /* Enable the TIM Capture/Compare 4 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC4); + break; + } + + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Enable the Output compare channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Enable the main output */ + __HAL_TIM_MOE_ENABLE(htim); + } + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + } + + /* Return function status */ + return status; +} + +/** + * @brief Stops the TIM Output Compare signal generation in interrupt mode. + * @param htim TIM Output Compare handle + * @param Channel TIM Channel to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OC_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_TIM_CCX_CHANNEL(htim->Instance, Channel)); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Disable the TIM Capture/Compare 1 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Disable the TIM Capture/Compare 2 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Disable the TIM Capture/Compare 3 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC3); + break; + } + + case TIM_CHANNEL_4: + { + /* Disable the TIM Capture/Compare 4 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC4); + break; + } + + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Disable the Output compare channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + } + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + } + + /* Return function status */ + return status; +} + +/** + * @brief Starts the TIM Output Compare signal generation in DMA mode. + * @param htim TIM Output Compare handle + * @param Channel TIM Channel to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @param pData The source Buffer address. + * @param Length The length of data to be transferred from memory to TIM peripheral + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, const uint32_t *pData, + uint16_t Length) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_CCX_CHANNEL(htim->Instance, Channel)); + + /* Set the TIM channel state */ + if (TIM_CHANNEL_STATE_GET(htim, Channel) == HAL_TIM_CHANNEL_STATE_BUSY) + { + return HAL_BUSY; + } + else if (TIM_CHANNEL_STATE_GET(htim, Channel) == HAL_TIM_CHANNEL_STATE_READY) + { + if ((pData == NULL) || (Length == 0U)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + else + { + return HAL_ERROR; + } + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMADelayPulseCplt; + htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)pData, (uint32_t)&htim->Instance->CCR1, + Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + + /* Enable the TIM Capture/Compare 1 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMADelayPulseCplt; + htim->hdma[TIM_DMA_ID_CC2]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)pData, (uint32_t)&htim->Instance->CCR2, + Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + + /* Enable the TIM Capture/Compare 2 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMADelayPulseCplt; + htim->hdma[TIM_DMA_ID_CC3]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)pData, (uint32_t)&htim->Instance->CCR3, + Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Capture/Compare 3 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC3); + break; + } + + case TIM_CHANNEL_4: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = TIM_DMADelayPulseCplt; + htim->hdma[TIM_DMA_ID_CC4]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)pData, (uint32_t)&htim->Instance->CCR4, + Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Capture/Compare 4 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC4); + break; + } + + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Enable the Output compare channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Enable the main output */ + __HAL_TIM_MOE_ENABLE(htim); + } + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + } + + /* Return function status */ + return status; +} + +/** + * @brief Stops the TIM Output Compare signal generation in DMA mode. + * @param htim TIM Output Compare handle + * @param Channel TIM Channel to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OC_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_TIM_CCX_CHANNEL(htim->Instance, Channel)); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Disable the TIM Capture/Compare 1 DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]); + break; + } + + case TIM_CHANNEL_2: + { + /* Disable the TIM Capture/Compare 2 DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC2]); + break; + } + + case TIM_CHANNEL_3: + { + /* Disable the TIM Capture/Compare 3 DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC3); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC3]); + break; + } + + case TIM_CHANNEL_4: + { + /* Disable the TIM Capture/Compare 4 interrupt */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC4); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC4]); + break; + } + + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Disable the Output compare channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + } + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + } + + /* Return function status */ + return status; +} + +/** + * @} + */ + +/** @defgroup TIM_Exported_Functions_Group3 TIM PWM functions + * @brief TIM PWM functions + * +@verbatim + ============================================================================== + ##### TIM PWM functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+) Initialize and configure the TIM PWM. + (+) De-initialize the TIM PWM. + (+) Start the TIM PWM. + (+) Stop the TIM PWM. + (+) Start the TIM PWM and enable interrupt. + (+) Stop the TIM PWM and disable interrupt. + (+) Start the TIM PWM and enable DMA transfer. + (+) Stop the TIM PWM and disable DMA transfer. + +@endverbatim + * @{ + */ +/** + * @brief Initializes the TIM PWM Time Base according to the specified + * parameters in the TIM_HandleTypeDef and initializes the associated handle. + * @note Switching from Center Aligned counter mode to Edge counter mode (or reverse) + * requires a timer reset to avoid unexpected direction + * due to DIR bit readonly in center aligned mode. + * Ex: call @ref HAL_TIM_PWM_DeInit() before HAL_TIM_PWM_Init() + * @param htim TIM PWM handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_PWM_Init(TIM_HandleTypeDef *htim) +{ + /* Check the TIM handle allocation */ + if (htim == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode)); + assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision)); + assert_param(IS_TIM_PERIOD(htim, htim->Init.Period)); + assert_param(IS_TIM_AUTORELOAD_PRELOAD(htim->Init.AutoReloadPreload)); + + if (htim->State == HAL_TIM_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + htim->Lock = HAL_UNLOCKED; + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + /* Reset interrupt callbacks to legacy weak callbacks */ + TIM_ResetCallback(htim); + + if (htim->PWM_MspInitCallback == NULL) + { + htim->PWM_MspInitCallback = HAL_TIM_PWM_MspInit; + } + /* Init the low level hardware : GPIO, CLOCK, NVIC */ + htim->PWM_MspInitCallback(htim); +#else + /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */ + HAL_TIM_PWM_MspInit(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + + /* Set the TIM state */ + htim->State = HAL_TIM_STATE_BUSY; + + /* Init the base time for the PWM */ + TIM_Base_SetConfig(htim->Instance, &htim->Init); + + /* Initialize the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_READY; + + /* Initialize the TIM channels state */ + TIM_CHANNEL_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_READY); + + /* Initialize the TIM state*/ + htim->State = HAL_TIM_STATE_READY; + + return HAL_OK; +} + +/** + * @brief DeInitializes the TIM peripheral + * @param htim TIM PWM handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_PWM_DeInit(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + + htim->State = HAL_TIM_STATE_BUSY; + + /* Disable the TIM Peripheral Clock */ + __HAL_TIM_DISABLE(htim); + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + if (htim->PWM_MspDeInitCallback == NULL) + { + htim->PWM_MspDeInitCallback = HAL_TIM_PWM_MspDeInit; + } + /* DeInit the low level hardware */ + htim->PWM_MspDeInitCallback(htim); +#else + /* DeInit the low level hardware: GPIO, CLOCK, NVIC and DMA */ + HAL_TIM_PWM_MspDeInit(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + + /* Change the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_RESET; + + /* Change the TIM channels state */ + TIM_CHANNEL_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_RESET); + TIM_CHANNEL_N_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_RESET); + + /* Change TIM state */ + htim->State = HAL_TIM_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Initializes the TIM PWM MSP. + * @param htim TIM PWM handle + * @retval None + */ +__weak void HAL_TIM_PWM_MspInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_PWM_MspInit could be implemented in the user file + */ +} + +/** + * @brief DeInitializes TIM PWM MSP. + * @param htim TIM PWM handle + * @retval None + */ +__weak void HAL_TIM_PWM_MspDeInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_PWM_MspDeInit could be implemented in the user file + */ +} + +/** + * @brief Starts the PWM signal generation. + * @param htim TIM handle + * @param Channel TIM Channels to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @arg TIM_CHANNEL_5: TIM Channel 5 selected + * @arg TIM_CHANNEL_6: TIM Channel 6 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_PWM_Start(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + /* Check the TIM channel state */ + if (TIM_CHANNEL_STATE_GET(htim, Channel) != HAL_TIM_CHANNEL_STATE_READY) + { + return HAL_ERROR; + } + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + + /* Enable the Capture compare channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Enable the main output */ + __HAL_TIM_MOE_ENABLE(htim); + } + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the PWM signal generation. + * @param htim TIM PWM handle + * @param Channel TIM Channels to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @arg TIM_CHANNEL_5: TIM Channel 5 selected + * @arg TIM_CHANNEL_6: TIM Channel 6 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_PWM_Stop(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + /* Disable the Capture compare channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + } + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the PWM signal generation in interrupt mode. + * @param htim TIM PWM handle + * @param Channel TIM Channel to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_PWM_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_CCX_CHANNEL(htim->Instance, Channel)); + + /* Check the TIM channel state */ + if (TIM_CHANNEL_STATE_GET(htim, Channel) != HAL_TIM_CHANNEL_STATE_READY) + { + return HAL_ERROR; + } + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Enable the TIM Capture/Compare 1 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Enable the TIM Capture/Compare 2 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Enable the TIM Capture/Compare 3 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC3); + break; + } + + case TIM_CHANNEL_4: + { + /* Enable the TIM Capture/Compare 4 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC4); + break; + } + + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Enable the Capture compare channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Enable the main output */ + __HAL_TIM_MOE_ENABLE(htim); + } + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + } + + /* Return function status */ + return status; +} + +/** + * @brief Stops the PWM signal generation in interrupt mode. + * @param htim TIM PWM handle + * @param Channel TIM Channels to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_PWM_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_TIM_CCX_CHANNEL(htim->Instance, Channel)); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Disable the TIM Capture/Compare 1 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Disable the TIM Capture/Compare 2 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Disable the TIM Capture/Compare 3 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC3); + break; + } + + case TIM_CHANNEL_4: + { + /* Disable the TIM Capture/Compare 4 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC4); + break; + } + + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Disable the Capture compare channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + } + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + } + + /* Return function status */ + return status; +} + +/** + * @brief Starts the TIM PWM signal generation in DMA mode. + * @param htim TIM PWM handle + * @param Channel TIM Channels to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @param pData The source Buffer address. + * @param Length The length of data to be transferred from memory to TIM peripheral + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_PWM_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, const uint32_t *pData, + uint16_t Length) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_CCX_CHANNEL(htim->Instance, Channel)); + + /* Set the TIM channel state */ + if (TIM_CHANNEL_STATE_GET(htim, Channel) == HAL_TIM_CHANNEL_STATE_BUSY) + { + return HAL_BUSY; + } + else if (TIM_CHANNEL_STATE_GET(htim, Channel) == HAL_TIM_CHANNEL_STATE_READY) + { + if ((pData == NULL) || (Length == 0U)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + else + { + return HAL_ERROR; + } + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMADelayPulseCplt; + htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)pData, (uint32_t)&htim->Instance->CCR1, + Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + + /* Enable the TIM Capture/Compare 1 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMADelayPulseCplt; + htim->hdma[TIM_DMA_ID_CC2]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)pData, (uint32_t)&htim->Instance->CCR2, + Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Capture/Compare 2 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMADelayPulseCplt; + htim->hdma[TIM_DMA_ID_CC3]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)pData, (uint32_t)&htim->Instance->CCR3, + Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Output Capture/Compare 3 request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC3); + break; + } + + case TIM_CHANNEL_4: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = TIM_DMADelayPulseCplt; + htim->hdma[TIM_DMA_ID_CC4]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)pData, (uint32_t)&htim->Instance->CCR4, + Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Capture/Compare 4 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC4); + break; + } + + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Enable the Capture compare channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Enable the main output */ + __HAL_TIM_MOE_ENABLE(htim); + } + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + } + + /* Return function status */ + return status; +} + +/** + * @brief Stops the TIM PWM signal generation in DMA mode. + * @param htim TIM PWM handle + * @param Channel TIM Channels to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_PWM_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_TIM_CCX_CHANNEL(htim->Instance, Channel)); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Disable the TIM Capture/Compare 1 DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]); + break; + } + + case TIM_CHANNEL_2: + { + /* Disable the TIM Capture/Compare 2 DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC2]); + break; + } + + case TIM_CHANNEL_3: + { + /* Disable the TIM Capture/Compare 3 DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC3); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC3]); + break; + } + + case TIM_CHANNEL_4: + { + /* Disable the TIM Capture/Compare 4 interrupt */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC4); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC4]); + break; + } + + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Disable the Capture compare channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + } + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + } + + /* Return function status */ + return status; +} + +/** + * @} + */ + +/** @defgroup TIM_Exported_Functions_Group4 TIM Input Capture functions + * @brief TIM Input Capture functions + * +@verbatim + ============================================================================== + ##### TIM Input Capture functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+) Initialize and configure the TIM Input Capture. + (+) De-initialize the TIM Input Capture. + (+) Start the TIM Input Capture. + (+) Stop the TIM Input Capture. + (+) Start the TIM Input Capture and enable interrupt. + (+) Stop the TIM Input Capture and disable interrupt. + (+) Start the TIM Input Capture and enable DMA transfer. + (+) Stop the TIM Input Capture and disable DMA transfer. + +@endverbatim + * @{ + */ +/** + * @brief Initializes the TIM Input Capture Time base according to the specified + * parameters in the TIM_HandleTypeDef and initializes the associated handle. + * @note Switching from Center Aligned counter mode to Edge counter mode (or reverse) + * requires a timer reset to avoid unexpected direction + * due to DIR bit readonly in center aligned mode. + * Ex: call @ref HAL_TIM_IC_DeInit() before HAL_TIM_IC_Init() + * @param htim TIM Input Capture handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_IC_Init(TIM_HandleTypeDef *htim) +{ + /* Check the TIM handle allocation */ + if (htim == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode)); + assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision)); + assert_param(IS_TIM_PERIOD(htim, htim->Init.Period)); + assert_param(IS_TIM_AUTORELOAD_PRELOAD(htim->Init.AutoReloadPreload)); + + if (htim->State == HAL_TIM_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + htim->Lock = HAL_UNLOCKED; + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + /* Reset interrupt callbacks to legacy weak callbacks */ + TIM_ResetCallback(htim); + + if (htim->IC_MspInitCallback == NULL) + { + htim->IC_MspInitCallback = HAL_TIM_IC_MspInit; + } + /* Init the low level hardware : GPIO, CLOCK, NVIC */ + htim->IC_MspInitCallback(htim); +#else + /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */ + HAL_TIM_IC_MspInit(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + + /* Set the TIM state */ + htim->State = HAL_TIM_STATE_BUSY; + + /* Init the base time for the input capture */ + TIM_Base_SetConfig(htim->Instance, &htim->Init); + + /* Initialize the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_READY; + + /* Initialize the TIM channels state */ + TIM_CHANNEL_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_READY); + + /* Initialize the TIM state*/ + htim->State = HAL_TIM_STATE_READY; + + return HAL_OK; +} + +/** + * @brief DeInitializes the TIM peripheral + * @param htim TIM Input Capture handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_IC_DeInit(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + + htim->State = HAL_TIM_STATE_BUSY; + + /* Disable the TIM Peripheral Clock */ + __HAL_TIM_DISABLE(htim); + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + if (htim->IC_MspDeInitCallback == NULL) + { + htim->IC_MspDeInitCallback = HAL_TIM_IC_MspDeInit; + } + /* DeInit the low level hardware */ + htim->IC_MspDeInitCallback(htim); +#else + /* DeInit the low level hardware: GPIO, CLOCK, NVIC and DMA */ + HAL_TIM_IC_MspDeInit(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + + /* Change the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_RESET; + + /* Change the TIM channels state */ + TIM_CHANNEL_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_RESET); + TIM_CHANNEL_N_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_RESET); + + /* Change TIM state */ + htim->State = HAL_TIM_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Initializes the TIM Input Capture MSP. + * @param htim TIM Input Capture handle + * @retval None + */ +__weak void HAL_TIM_IC_MspInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_IC_MspInit could be implemented in the user file + */ +} + +/** + * @brief DeInitializes TIM Input Capture MSP. + * @param htim TIM handle + * @retval None + */ +__weak void HAL_TIM_IC_MspDeInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_IC_MspDeInit could be implemented in the user file + */ +} + +/** + * @brief Starts the TIM Input Capture measurement. + * @param htim TIM Input Capture handle + * @param Channel TIM Channels to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_IC_Start(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + uint32_t tmpsmcr; + HAL_TIM_ChannelStateTypeDef channel_state = TIM_CHANNEL_STATE_GET(htim, Channel); + HAL_TIM_ChannelStateTypeDef complementary_channel_state = TIM_CHANNEL_N_STATE_GET(htim, Channel); + + /* Check the parameters */ + assert_param(IS_TIM_CCX_CHANNEL(htim->Instance, Channel)); + + /* Check the TIM channel state */ + if ((channel_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + + /* Enable the Input Capture channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Input Capture measurement. + * @param htim TIM Input Capture handle + * @param Channel TIM Channels to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_IC_Stop(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_TIM_CCX_CHANNEL(htim->Instance, Channel)); + + /* Disable the Input Capture channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the TIM Input Capture measurement in interrupt mode. + * @param htim TIM Input Capture handle + * @param Channel TIM Channels to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_IC_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t tmpsmcr; + + HAL_TIM_ChannelStateTypeDef channel_state = TIM_CHANNEL_STATE_GET(htim, Channel); + HAL_TIM_ChannelStateTypeDef complementary_channel_state = TIM_CHANNEL_N_STATE_GET(htim, Channel); + + /* Check the parameters */ + assert_param(IS_TIM_CCX_CHANNEL(htim->Instance, Channel)); + + /* Check the TIM channel state */ + if ((channel_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Enable the TIM Capture/Compare 1 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Enable the TIM Capture/Compare 2 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Enable the TIM Capture/Compare 3 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC3); + break; + } + + case TIM_CHANNEL_4: + { + /* Enable the TIM Capture/Compare 4 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC4); + break; + } + + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Enable the Input Capture channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + } + + /* Return function status */ + return status; +} + +/** + * @brief Stops the TIM Input Capture measurement in interrupt mode. + * @param htim TIM Input Capture handle + * @param Channel TIM Channels to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_IC_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_TIM_CCX_CHANNEL(htim->Instance, Channel)); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Disable the TIM Capture/Compare 1 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Disable the TIM Capture/Compare 2 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Disable the TIM Capture/Compare 3 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC3); + break; + } + + case TIM_CHANNEL_4: + { + /* Disable the TIM Capture/Compare 4 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC4); + break; + } + + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Disable the Input Capture channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + } + + /* Return function status */ + return status; +} + +/** + * @brief Starts the TIM Input Capture measurement in DMA mode. + * @param htim TIM Input Capture handle + * @param Channel TIM Channels to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @param pData The destination Buffer address. + * @param Length The length of data to be transferred from TIM peripheral to memory. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_IC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t tmpsmcr; + + HAL_TIM_ChannelStateTypeDef channel_state = TIM_CHANNEL_STATE_GET(htim, Channel); + HAL_TIM_ChannelStateTypeDef complementary_channel_state = TIM_CHANNEL_N_STATE_GET(htim, Channel); + + /* Check the parameters */ + assert_param(IS_TIM_CCX_CHANNEL(htim->Instance, Channel)); + assert_param(IS_TIM_DMA_CC_INSTANCE(htim->Instance)); + + /* Set the TIM channel state */ + if ((channel_state == HAL_TIM_CHANNEL_STATE_BUSY) + || (complementary_channel_state == HAL_TIM_CHANNEL_STATE_BUSY)) + { + return HAL_BUSY; + } + else if ((channel_state == HAL_TIM_CHANNEL_STATE_READY) + && (complementary_channel_state == HAL_TIM_CHANNEL_STATE_READY)) + { + if ((pData == NULL) || (Length == 0U)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + else + { + return HAL_ERROR; + } + + /* Enable the Input Capture channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Set the DMA capture callbacks */ + htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMACaptureCplt; + htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->CCR1, (uint32_t)pData, + Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Capture/Compare 1 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Set the DMA capture callbacks */ + htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMACaptureCplt; + htim->hdma[TIM_DMA_ID_CC2]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)&htim->Instance->CCR2, (uint32_t)pData, + Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Capture/Compare 2 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Set the DMA capture callbacks */ + htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMACaptureCplt; + htim->hdma[TIM_DMA_ID_CC3]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)&htim->Instance->CCR3, (uint32_t)pData, + Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Capture/Compare 3 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC3); + break; + } + + case TIM_CHANNEL_4: + { + /* Set the DMA capture callbacks */ + htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = TIM_DMACaptureCplt; + htim->hdma[TIM_DMA_ID_CC4]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)&htim->Instance->CCR4, (uint32_t)pData, + Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Capture/Compare 4 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC4); + break; + } + + default: + status = HAL_ERROR; + break; + } + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return status; +} + +/** + * @brief Stops the TIM Input Capture measurement in DMA mode. + * @param htim TIM Input Capture handle + * @param Channel TIM Channels to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_IC_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_TIM_CCX_CHANNEL(htim->Instance, Channel)); + assert_param(IS_TIM_DMA_CC_INSTANCE(htim->Instance)); + + /* Disable the Input Capture channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Disable the TIM Capture/Compare 1 DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]); + break; + } + + case TIM_CHANNEL_2: + { + /* Disable the TIM Capture/Compare 2 DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC2]); + break; + } + + case TIM_CHANNEL_3: + { + /* Disable the TIM Capture/Compare 3 DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC3); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC3]); + break; + } + + case TIM_CHANNEL_4: + { + /* Disable the TIM Capture/Compare 4 DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC4); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC4]); + break; + } + + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + } + + /* Return function status */ + return status; +} +/** + * @} + */ + +/** @defgroup TIM_Exported_Functions_Group5 TIM One Pulse functions + * @brief TIM One Pulse functions + * +@verbatim + ============================================================================== + ##### TIM One Pulse functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+) Initialize and configure the TIM One Pulse. + (+) De-initialize the TIM One Pulse. + (+) Start the TIM One Pulse. + (+) Stop the TIM One Pulse. + (+) Start the TIM One Pulse and enable interrupt. + (+) Stop the TIM One Pulse and disable interrupt. + (+) Start the TIM One Pulse and enable DMA transfer. + (+) Stop the TIM One Pulse and disable DMA transfer. + +@endverbatim + * @{ + */ +/** + * @brief Initializes the TIM One Pulse Time Base according to the specified + * parameters in the TIM_HandleTypeDef and initializes the associated handle. + * @note Switching from Center Aligned counter mode to Edge counter mode (or reverse) + * requires a timer reset to avoid unexpected direction + * due to DIR bit readonly in center aligned mode. + * Ex: call @ref HAL_TIM_OnePulse_DeInit() before HAL_TIM_OnePulse_Init() + * @note When the timer instance is initialized in One Pulse mode, timer + * channels 1 and channel 2 are reserved and cannot be used for other + * purpose. + * @param htim TIM One Pulse handle + * @param OnePulseMode Select the One pulse mode. + * This parameter can be one of the following values: + * @arg TIM_OPMODE_SINGLE: Only one pulse will be generated. + * @arg TIM_OPMODE_REPETITIVE: Repetitive pulses will be generated. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OnePulse_Init(TIM_HandleTypeDef *htim, uint32_t OnePulseMode) +{ + /* Check the TIM handle allocation */ + if (htim == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode)); + assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision)); + assert_param(IS_TIM_OPM_MODE(OnePulseMode)); + assert_param(IS_TIM_PERIOD(htim, htim->Init.Period)); + assert_param(IS_TIM_AUTORELOAD_PRELOAD(htim->Init.AutoReloadPreload)); + + if (htim->State == HAL_TIM_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + htim->Lock = HAL_UNLOCKED; + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + /* Reset interrupt callbacks to legacy weak callbacks */ + TIM_ResetCallback(htim); + + if (htim->OnePulse_MspInitCallback == NULL) + { + htim->OnePulse_MspInitCallback = HAL_TIM_OnePulse_MspInit; + } + /* Init the low level hardware : GPIO, CLOCK, NVIC */ + htim->OnePulse_MspInitCallback(htim); +#else + /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */ + HAL_TIM_OnePulse_MspInit(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + + /* Set the TIM state */ + htim->State = HAL_TIM_STATE_BUSY; + + /* Configure the Time base in the One Pulse Mode */ + TIM_Base_SetConfig(htim->Instance, &htim->Init); + + /* Reset the OPM Bit */ + htim->Instance->CR1 &= ~TIM_CR1_OPM; + + /* Configure the OPM Mode */ + htim->Instance->CR1 |= OnePulseMode; + + /* Initialize the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_READY; + + /* Initialize the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + + /* Initialize the TIM state*/ + htim->State = HAL_TIM_STATE_READY; + + return HAL_OK; +} + +/** + * @brief DeInitializes the TIM One Pulse + * @param htim TIM One Pulse handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OnePulse_DeInit(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + + htim->State = HAL_TIM_STATE_BUSY; + + /* Disable the TIM Peripheral Clock */ + __HAL_TIM_DISABLE(htim); + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + if (htim->OnePulse_MspDeInitCallback == NULL) + { + htim->OnePulse_MspDeInitCallback = HAL_TIM_OnePulse_MspDeInit; + } + /* DeInit the low level hardware */ + htim->OnePulse_MspDeInitCallback(htim); +#else + /* DeInit the low level hardware: GPIO, CLOCK, NVIC */ + HAL_TIM_OnePulse_MspDeInit(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + + /* Change the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_RESET; + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_RESET); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_RESET); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_RESET); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_RESET); + + /* Change TIM state */ + htim->State = HAL_TIM_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Initializes the TIM One Pulse MSP. + * @param htim TIM One Pulse handle + * @retval None + */ +__weak void HAL_TIM_OnePulse_MspInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_OnePulse_MspInit could be implemented in the user file + */ +} + +/** + * @brief DeInitializes TIM One Pulse MSP. + * @param htim TIM One Pulse handle + * @retval None + */ +__weak void HAL_TIM_OnePulse_MspDeInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_OnePulse_MspDeInit could be implemented in the user file + */ +} + +/** + * @brief Starts the TIM One Pulse signal generation. + * @note Though OutputChannel parameter is deprecated and ignored by the function + * it has been kept to avoid HAL_TIM API compatibility break. + * @note The pulse output channel is determined when calling + * @ref HAL_TIM_OnePulse_ConfigChannel(). + * @param htim TIM One Pulse handle + * @param OutputChannel See note above + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OnePulse_Start(TIM_HandleTypeDef *htim, uint32_t OutputChannel) +{ + HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef channel_2_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_2); + HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef complementary_channel_2_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_2); + + /* Prevent unused argument(s) compilation warning */ + UNUSED(OutputChannel); + + /* Check the TIM channels state */ + if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (channel_2_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + + /* Set the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + + /* Enable the Capture compare and the Input Capture channels + (in the OPM Mode the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) + if TIM_CHANNEL_1 is used as output, the TIM_CHANNEL_2 will be used as input and + if TIM_CHANNEL_1 is used as input, the TIM_CHANNEL_2 will be used as output + whatever the combination, the TIM_CHANNEL_1 and TIM_CHANNEL_2 should be enabled together + + No need to enable the counter, it's enabled automatically by hardware + (the counter starts in response to a stimulus and generate a pulse */ + + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Enable the main output */ + __HAL_TIM_MOE_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM One Pulse signal generation. + * @note Though OutputChannel parameter is deprecated and ignored by the function + * it has been kept to avoid HAL_TIM API compatibility break. + * @note The pulse output channel is determined when calling + * @ref HAL_TIM_OnePulse_ConfigChannel(). + * @param htim TIM One Pulse handle + * @param OutputChannel See note above + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OnePulse_Stop(TIM_HandleTypeDef *htim, uint32_t OutputChannel) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(OutputChannel); + + /* Disable the Capture compare and the Input Capture channels + (in the OPM Mode the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) + if TIM_CHANNEL_1 is used as output, the TIM_CHANNEL_2 will be used as input and + if TIM_CHANNEL_1 is used as input, the TIM_CHANNEL_2 will be used as output + whatever the combination, the TIM_CHANNEL_1 and TIM_CHANNEL_2 should be disabled together */ + + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + } + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the TIM One Pulse signal generation in interrupt mode. + * @note Though OutputChannel parameter is deprecated and ignored by the function + * it has been kept to avoid HAL_TIM API compatibility break. + * @note The pulse output channel is determined when calling + * @ref HAL_TIM_OnePulse_ConfigChannel(). + * @param htim TIM One Pulse handle + * @param OutputChannel See note above + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OnePulse_Start_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel) +{ + HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef channel_2_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_2); + HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef complementary_channel_2_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_2); + + /* Prevent unused argument(s) compilation warning */ + UNUSED(OutputChannel); + + /* Check the TIM channels state */ + if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (channel_2_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + + /* Set the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + + /* Enable the Capture compare and the Input Capture channels + (in the OPM Mode the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) + if TIM_CHANNEL_1 is used as output, the TIM_CHANNEL_2 will be used as input and + if TIM_CHANNEL_1 is used as input, the TIM_CHANNEL_2 will be used as output + whatever the combination, the TIM_CHANNEL_1 and TIM_CHANNEL_2 should be enabled together + + No need to enable the counter, it's enabled automatically by hardware + (the counter starts in response to a stimulus and generate a pulse */ + + /* Enable the TIM Capture/Compare 1 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); + + /* Enable the TIM Capture/Compare 2 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2); + + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Enable the main output */ + __HAL_TIM_MOE_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM One Pulse signal generation in interrupt mode. + * @note Though OutputChannel parameter is deprecated and ignored by the function + * it has been kept to avoid HAL_TIM API compatibility break. + * @note The pulse output channel is determined when calling + * @ref HAL_TIM_OnePulse_ConfigChannel(). + * @param htim TIM One Pulse handle + * @param OutputChannel See note above + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OnePulse_Stop_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(OutputChannel); + + /* Disable the TIM Capture/Compare 1 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1); + + /* Disable the TIM Capture/Compare 2 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2); + + /* Disable the Capture compare and the Input Capture channels + (in the OPM Mode the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) + if TIM_CHANNEL_1 is used as output, the TIM_CHANNEL_2 will be used as input and + if TIM_CHANNEL_1 is used as input, the TIM_CHANNEL_2 will be used as output + whatever the combination, the TIM_CHANNEL_1 and TIM_CHANNEL_2 should be disabled together */ + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + } + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @} + */ + +/** @defgroup TIM_Exported_Functions_Group6 TIM Encoder functions + * @brief TIM Encoder functions + * +@verbatim + ============================================================================== + ##### TIM Encoder functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+) Initialize and configure the TIM Encoder. + (+) De-initialize the TIM Encoder. + (+) Start the TIM Encoder. + (+) Stop the TIM Encoder. + (+) Start the TIM Encoder and enable interrupt. + (+) Stop the TIM Encoder and disable interrupt. + (+) Start the TIM Encoder and enable DMA transfer. + (+) Stop the TIM Encoder and disable DMA transfer. + +@endverbatim + * @{ + */ +/** + * @brief Initializes the TIM Encoder Interface and initialize the associated handle. + * @note Switching from Center Aligned counter mode to Edge counter mode (or reverse) + * requires a timer reset to avoid unexpected direction + * due to DIR bit readonly in center aligned mode. + * Ex: call @ref HAL_TIM_Encoder_DeInit() before HAL_TIM_Encoder_Init() + * @note Encoder mode and External clock mode 2 are not compatible and must not be selected together + * Ex: A call for @ref HAL_TIM_Encoder_Init will erase the settings of @ref HAL_TIM_ConfigClockSource + * using TIM_CLOCKSOURCE_ETRMODE2 and vice versa + * @note When the timer instance is initialized in Encoder mode, timer + * channels 1 and channel 2 are reserved and cannot be used for other + * purpose. + * @param htim TIM Encoder Interface handle + * @param sConfig TIM Encoder Interface configuration structure + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Encoder_Init(TIM_HandleTypeDef *htim, const TIM_Encoder_InitTypeDef *sConfig) +{ + uint32_t tmpsmcr; + uint32_t tmpccmr1; + uint32_t tmpccer; + + /* Check the TIM handle allocation */ + if (htim == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_TIM_ENCODER_INTERFACE_INSTANCE(htim->Instance)); + assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode)); + assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision)); + assert_param(IS_TIM_AUTORELOAD_PRELOAD(htim->Init.AutoReloadPreload)); + assert_param(IS_TIM_ENCODER_MODE(sConfig->EncoderMode)); + assert_param(IS_TIM_IC_SELECTION(sConfig->IC1Selection)); + assert_param(IS_TIM_IC_SELECTION(sConfig->IC2Selection)); + assert_param(IS_TIM_ENCODERINPUT_POLARITY(sConfig->IC1Polarity)); + assert_param(IS_TIM_ENCODERINPUT_POLARITY(sConfig->IC2Polarity)); + assert_param(IS_TIM_IC_PRESCALER(sConfig->IC1Prescaler)); + assert_param(IS_TIM_IC_PRESCALER(sConfig->IC2Prescaler)); + assert_param(IS_TIM_IC_FILTER(sConfig->IC1Filter)); + assert_param(IS_TIM_IC_FILTER(sConfig->IC2Filter)); + assert_param(IS_TIM_PERIOD(htim, htim->Init.Period)); + + if (htim->State == HAL_TIM_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + htim->Lock = HAL_UNLOCKED; + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + /* Reset interrupt callbacks to legacy weak callbacks */ + TIM_ResetCallback(htim); + + if (htim->Encoder_MspInitCallback == NULL) + { + htim->Encoder_MspInitCallback = HAL_TIM_Encoder_MspInit; + } + /* Init the low level hardware : GPIO, CLOCK, NVIC */ + htim->Encoder_MspInitCallback(htim); +#else + /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */ + HAL_TIM_Encoder_MspInit(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + + /* Set the TIM state */ + htim->State = HAL_TIM_STATE_BUSY; + + /* Reset the SMS and ECE bits */ + htim->Instance->SMCR &= ~(TIM_SMCR_SMS | TIM_SMCR_ECE); + + /* Configure the Time base in the Encoder Mode */ + TIM_Base_SetConfig(htim->Instance, &htim->Init); + + /* Get the TIMx SMCR register value */ + tmpsmcr = htim->Instance->SMCR; + + /* Get the TIMx CCMR1 register value */ + tmpccmr1 = htim->Instance->CCMR1; + + /* Get the TIMx CCER register value */ + tmpccer = htim->Instance->CCER; + + /* Set the encoder Mode */ + tmpsmcr |= sConfig->EncoderMode; + + /* Select the Capture Compare 1 and the Capture Compare 2 as input */ + tmpccmr1 &= ~(TIM_CCMR1_CC1S | TIM_CCMR1_CC2S); + tmpccmr1 |= (sConfig->IC1Selection | (sConfig->IC2Selection << 8U)); + + /* Set the Capture Compare 1 and the Capture Compare 2 prescalers and filters */ + tmpccmr1 &= ~(TIM_CCMR1_IC1PSC | TIM_CCMR1_IC2PSC); + tmpccmr1 &= ~(TIM_CCMR1_IC1F | TIM_CCMR1_IC2F); + tmpccmr1 |= sConfig->IC1Prescaler | (sConfig->IC2Prescaler << 8U); + tmpccmr1 |= (sConfig->IC1Filter << 4U) | (sConfig->IC2Filter << 12U); + + /* Set the TI1 and the TI2 Polarities */ + tmpccer &= ~(TIM_CCER_CC1P | TIM_CCER_CC2P); + tmpccer &= ~(TIM_CCER_CC1NP | TIM_CCER_CC2NP); + tmpccer |= sConfig->IC1Polarity | (sConfig->IC2Polarity << 4U); + + /* Write to TIMx SMCR */ + htim->Instance->SMCR = tmpsmcr; + + /* Write to TIMx CCMR1 */ + htim->Instance->CCMR1 = tmpccmr1; + + /* Write to TIMx CCER */ + htim->Instance->CCER = tmpccer; + + /* Initialize the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_READY; + + /* Set the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + + /* Initialize the TIM state*/ + htim->State = HAL_TIM_STATE_READY; + + return HAL_OK; +} + + +/** + * @brief DeInitializes the TIM Encoder interface + * @param htim TIM Encoder Interface handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Encoder_DeInit(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + + htim->State = HAL_TIM_STATE_BUSY; + + /* Disable the TIM Peripheral Clock */ + __HAL_TIM_DISABLE(htim); + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + if (htim->Encoder_MspDeInitCallback == NULL) + { + htim->Encoder_MspDeInitCallback = HAL_TIM_Encoder_MspDeInit; + } + /* DeInit the low level hardware */ + htim->Encoder_MspDeInitCallback(htim); +#else + /* DeInit the low level hardware: GPIO, CLOCK, NVIC */ + HAL_TIM_Encoder_MspDeInit(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + + /* Change the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_RESET; + + /* Set the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_RESET); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_RESET); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_RESET); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_RESET); + + /* Change TIM state */ + htim->State = HAL_TIM_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Initializes the TIM Encoder Interface MSP. + * @param htim TIM Encoder Interface handle + * @retval None + */ +__weak void HAL_TIM_Encoder_MspInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_Encoder_MspInit could be implemented in the user file + */ +} + +/** + * @brief DeInitializes TIM Encoder Interface MSP. + * @param htim TIM Encoder Interface handle + * @retval None + */ +__weak void HAL_TIM_Encoder_MspDeInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_Encoder_MspDeInit could be implemented in the user file + */ +} + +/** + * @brief Starts the TIM Encoder Interface. + * @param htim TIM Encoder Interface handle + * @param Channel TIM Channels to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Encoder_Start(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef channel_2_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_2); + HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef complementary_channel_2_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_2); + + /* Check the parameters */ + assert_param(IS_TIM_ENCODER_INTERFACE_INSTANCE(htim->Instance)); + + /* Set the TIM channel(s) state */ + if (Channel == TIM_CHANNEL_1) + { + if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + else if (Channel == TIM_CHANNEL_2) + { + if ((channel_2_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + else + { + if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (channel_2_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + + /* Enable the encoder interface channels */ + switch (Channel) + { + case TIM_CHANNEL_1: + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); + break; + } + + case TIM_CHANNEL_2: + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE); + break; + } + + default : + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE); + break; + } + } + /* Enable the Peripheral */ + __HAL_TIM_ENABLE(htim); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Encoder Interface. + * @param htim TIM Encoder Interface handle + * @param Channel TIM Channels to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Encoder_Stop(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_TIM_ENCODER_INTERFACE_INSTANCE(htim->Instance)); + + /* Disable the Input Capture channels 1 and 2 + (in the EncoderInterface the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) */ + switch (Channel) + { + case TIM_CHANNEL_1: + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); + break; + } + + case TIM_CHANNEL_2: + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE); + break; + } + + default : + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE); + break; + } + } + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channel(s) state */ + if ((Channel == TIM_CHANNEL_1) || (Channel == TIM_CHANNEL_2)) + { + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + } + else + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the TIM Encoder Interface in interrupt mode. + * @param htim TIM Encoder Interface handle + * @param Channel TIM Channels to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Encoder_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef channel_2_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_2); + HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef complementary_channel_2_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_2); + + /* Check the parameters */ + assert_param(IS_TIM_ENCODER_INTERFACE_INSTANCE(htim->Instance)); + + /* Set the TIM channel(s) state */ + if (Channel == TIM_CHANNEL_1) + { + if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + else if (Channel == TIM_CHANNEL_2) + { + if ((channel_2_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + else + { + if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (channel_2_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + + /* Enable the encoder interface channels */ + /* Enable the capture compare Interrupts 1 and/or 2 */ + switch (Channel) + { + case TIM_CHANNEL_1: + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); + break; + } + + case TIM_CHANNEL_2: + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE); + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2); + break; + } + + default : + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE); + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2); + break; + } + } + + /* Enable the Peripheral */ + __HAL_TIM_ENABLE(htim); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Encoder Interface in interrupt mode. + * @param htim TIM Encoder Interface handle + * @param Channel TIM Channels to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Encoder_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_TIM_ENCODER_INTERFACE_INSTANCE(htim->Instance)); + + /* Disable the Input Capture channels 1 and 2 + (in the EncoderInterface the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) */ + if (Channel == TIM_CHANNEL_1) + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); + + /* Disable the capture compare Interrupts 1 */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1); + } + else if (Channel == TIM_CHANNEL_2) + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE); + + /* Disable the capture compare Interrupts 2 */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2); + } + else + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE); + + /* Disable the capture compare Interrupts 1 and 2 */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1); + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2); + } + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channel(s) state */ + if ((Channel == TIM_CHANNEL_1) || (Channel == TIM_CHANNEL_2)) + { + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + } + else + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the TIM Encoder Interface in DMA mode. + * @param htim TIM Encoder Interface handle + * @param Channel TIM Channels to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected + * @param pData1 The destination Buffer address for IC1. + * @param pData2 The destination Buffer address for IC2. + * @param Length The length of data to be transferred from TIM peripheral to memory. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Encoder_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData1, + uint32_t *pData2, uint16_t Length) +{ + HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef channel_2_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_2); + HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef complementary_channel_2_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_2); + + /* Check the parameters */ + assert_param(IS_TIM_ENCODER_INTERFACE_INSTANCE(htim->Instance)); + + /* Set the TIM channel(s) state */ + if (Channel == TIM_CHANNEL_1) + { + if ((channel_1_state == HAL_TIM_CHANNEL_STATE_BUSY) + || (complementary_channel_1_state == HAL_TIM_CHANNEL_STATE_BUSY)) + { + return HAL_BUSY; + } + else if ((channel_1_state == HAL_TIM_CHANNEL_STATE_READY) + && (complementary_channel_1_state == HAL_TIM_CHANNEL_STATE_READY)) + { + if ((pData1 == NULL) || (Length == 0U)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + else + { + return HAL_ERROR; + } + } + else if (Channel == TIM_CHANNEL_2) + { + if ((channel_2_state == HAL_TIM_CHANNEL_STATE_BUSY) + || (complementary_channel_2_state == HAL_TIM_CHANNEL_STATE_BUSY)) + { + return HAL_BUSY; + } + else if ((channel_2_state == HAL_TIM_CHANNEL_STATE_READY) + && (complementary_channel_2_state == HAL_TIM_CHANNEL_STATE_READY)) + { + if ((pData2 == NULL) || (Length == 0U)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + else + { + return HAL_ERROR; + } + } + else + { + if ((channel_1_state == HAL_TIM_CHANNEL_STATE_BUSY) + || (channel_2_state == HAL_TIM_CHANNEL_STATE_BUSY) + || (complementary_channel_1_state == HAL_TIM_CHANNEL_STATE_BUSY) + || (complementary_channel_2_state == HAL_TIM_CHANNEL_STATE_BUSY)) + { + return HAL_BUSY; + } + else if ((channel_1_state == HAL_TIM_CHANNEL_STATE_READY) + && (channel_2_state == HAL_TIM_CHANNEL_STATE_READY) + && (complementary_channel_1_state == HAL_TIM_CHANNEL_STATE_READY) + && (complementary_channel_2_state == HAL_TIM_CHANNEL_STATE_READY)) + { + if ((((pData1 == NULL) || (pData2 == NULL))) || (Length == 0U)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + else + { + return HAL_ERROR; + } + } + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Set the DMA capture callbacks */ + htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMACaptureCplt; + htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->CCR1, (uint32_t)pData1, + Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Input Capture DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1); + + /* Enable the Capture compare channel */ + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); + + /* Enable the Peripheral */ + __HAL_TIM_ENABLE(htim); + + break; + } + + case TIM_CHANNEL_2: + { + /* Set the DMA capture callbacks */ + htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMACaptureCplt; + htim->hdma[TIM_DMA_ID_CC2]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError; + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)&htim->Instance->CCR2, (uint32_t)pData2, + Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Input Capture DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2); + + /* Enable the Capture compare channel */ + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE); + + /* Enable the Peripheral */ + __HAL_TIM_ENABLE(htim); + + break; + } + + default: + { + /* Set the DMA capture callbacks */ + htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMACaptureCplt; + htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->CCR1, (uint32_t)pData1, + Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + + /* Set the DMA capture callbacks */ + htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMACaptureCplt; + htim->hdma[TIM_DMA_ID_CC2]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)&htim->Instance->CCR2, (uint32_t)pData2, + Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + + /* Enable the TIM Input Capture DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1); + /* Enable the TIM Input Capture DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2); + + /* Enable the Capture compare channel */ + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE); + + /* Enable the Peripheral */ + __HAL_TIM_ENABLE(htim); + + break; + } + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Encoder Interface in DMA mode. + * @param htim TIM Encoder Interface handle + * @param Channel TIM Channels to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Encoder_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_TIM_ENCODER_INTERFACE_INSTANCE(htim->Instance)); + + /* Disable the Input Capture channels 1 and 2 + (in the EncoderInterface the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) */ + if (Channel == TIM_CHANNEL_1) + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); + + /* Disable the capture compare DMA Request 1 */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]); + } + else if (Channel == TIM_CHANNEL_2) + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE); + + /* Disable the capture compare DMA Request 2 */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC2]); + } + else + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE); + + /* Disable the capture compare DMA Request 1 and 2 */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1); + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC2]); + } + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channel(s) state */ + if ((Channel == TIM_CHANNEL_1) || (Channel == TIM_CHANNEL_2)) + { + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + } + else + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @} + */ +/** @defgroup TIM_Exported_Functions_Group7 TIM IRQ handler management + * @brief TIM IRQ handler management + * +@verbatim + ============================================================================== + ##### IRQ handler management ##### + ============================================================================== + [..] + This section provides Timer IRQ handler function. + +@endverbatim + * @{ + */ +/** + * @brief This function handles TIM interrupts requests. + * @param htim TIM handle + * @retval None + */ +void HAL_TIM_IRQHandler(TIM_HandleTypeDef *htim) +{ + uint32_t itsource = htim->Instance->DIER; + uint32_t itflag = htim->Instance->SR; + + /* Capture compare 1 event */ + if ((itflag & (TIM_FLAG_CC1)) == (TIM_FLAG_CC1)) + { + if ((itsource & (TIM_IT_CC1)) == (TIM_IT_CC1)) + { + { + __HAL_TIM_CLEAR_FLAG(htim, TIM_FLAG_CC1); + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1; + + /* Input capture event */ + if ((htim->Instance->CCMR1 & TIM_CCMR1_CC1S) != 0x00U) + { +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->IC_CaptureCallback(htim); +#else + HAL_TIM_IC_CaptureCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + /* Output compare event */ + else + { +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->OC_DelayElapsedCallback(htim); + htim->PWM_PulseFinishedCallback(htim); +#else + HAL_TIM_OC_DelayElapsedCallback(htim); + HAL_TIM_PWM_PulseFinishedCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; + } + } + } + /* Capture compare 2 event */ + if ((itflag & (TIM_FLAG_CC2)) == (TIM_FLAG_CC2)) + { + if ((itsource & (TIM_IT_CC2)) == (TIM_IT_CC2)) + { + __HAL_TIM_CLEAR_FLAG(htim, TIM_FLAG_CC2); + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2; + /* Input capture event */ + if ((htim->Instance->CCMR1 & TIM_CCMR1_CC2S) != 0x00U) + { +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->IC_CaptureCallback(htim); +#else + HAL_TIM_IC_CaptureCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + /* Output compare event */ + else + { +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->OC_DelayElapsedCallback(htim); + htim->PWM_PulseFinishedCallback(htim); +#else + HAL_TIM_OC_DelayElapsedCallback(htim); + HAL_TIM_PWM_PulseFinishedCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; + } + } + /* Capture compare 3 event */ + if ((itflag & (TIM_FLAG_CC3)) == (TIM_FLAG_CC3)) + { + if ((itsource & (TIM_IT_CC3)) == (TIM_IT_CC3)) + { + __HAL_TIM_CLEAR_FLAG(htim, TIM_FLAG_CC3); + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3; + /* Input capture event */ + if ((htim->Instance->CCMR2 & TIM_CCMR2_CC3S) != 0x00U) + { +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->IC_CaptureCallback(htim); +#else + HAL_TIM_IC_CaptureCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + /* Output compare event */ + else + { +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->OC_DelayElapsedCallback(htim); + htim->PWM_PulseFinishedCallback(htim); +#else + HAL_TIM_OC_DelayElapsedCallback(htim); + HAL_TIM_PWM_PulseFinishedCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; + } + } + /* Capture compare 4 event */ + if ((itflag & (TIM_FLAG_CC4)) == (TIM_FLAG_CC4)) + { + if ((itsource & (TIM_IT_CC4)) == (TIM_IT_CC4)) + { + __HAL_TIM_CLEAR_FLAG(htim, TIM_FLAG_CC4); + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4; + /* Input capture event */ + if ((htim->Instance->CCMR2 & TIM_CCMR2_CC4S) != 0x00U) + { +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->IC_CaptureCallback(htim); +#else + HAL_TIM_IC_CaptureCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + /* Output compare event */ + else + { +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->OC_DelayElapsedCallback(htim); + htim->PWM_PulseFinishedCallback(htim); +#else + HAL_TIM_OC_DelayElapsedCallback(htim); + HAL_TIM_PWM_PulseFinishedCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; + } + } + /* TIM Update event */ + if ((itflag & (TIM_FLAG_UPDATE)) == (TIM_FLAG_UPDATE)) + { + if ((itsource & (TIM_IT_UPDATE)) == (TIM_IT_UPDATE)) + { + __HAL_TIM_CLEAR_FLAG(htim, TIM_FLAG_UPDATE); +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->PeriodElapsedCallback(htim); +#else + HAL_TIM_PeriodElapsedCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + } + /* TIM Break input event */ + if (((itflag & (TIM_FLAG_BREAK)) == (TIM_FLAG_BREAK)) || \ + ((itflag & (TIM_FLAG_SYSTEM_BREAK)) == (TIM_FLAG_SYSTEM_BREAK))) + { + if ((itsource & (TIM_IT_BREAK)) == (TIM_IT_BREAK)) + { + __HAL_TIM_CLEAR_FLAG(htim, TIM_FLAG_BREAK | TIM_FLAG_SYSTEM_BREAK); +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->BreakCallback(htim); +#else + HAL_TIMEx_BreakCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + } + /* TIM Break2 input event */ + if ((itflag & (TIM_FLAG_BREAK2)) == (TIM_FLAG_BREAK2)) + { + if ((itsource & (TIM_IT_BREAK)) == (TIM_IT_BREAK)) + { + __HAL_TIM_CLEAR_FLAG(htim, TIM_FLAG_BREAK2); +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->Break2Callback(htim); +#else + HAL_TIMEx_Break2Callback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + } + /* TIM Trigger detection event */ + if ((itflag & (TIM_FLAG_TRIGGER)) == (TIM_FLAG_TRIGGER)) + { + if ((itsource & (TIM_IT_TRIGGER)) == (TIM_IT_TRIGGER)) + { + __HAL_TIM_CLEAR_FLAG(htim, TIM_FLAG_TRIGGER); +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->TriggerCallback(htim); +#else + HAL_TIM_TriggerCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + } + /* TIM commutation event */ + if ((itflag & (TIM_FLAG_COM)) == (TIM_FLAG_COM)) + { + if ((itsource & (TIM_IT_COM)) == (TIM_IT_COM)) + { + __HAL_TIM_CLEAR_FLAG(htim, TIM_FLAG_COM); +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->CommutationCallback(htim); +#else + HAL_TIMEx_CommutCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + } +} + +/** + * @} + */ + +/** @defgroup TIM_Exported_Functions_Group8 TIM Peripheral Control functions + * @brief TIM Peripheral Control functions + * +@verbatim + ============================================================================== + ##### Peripheral Control functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+) Configure The Input Output channels for OC, PWM, IC or One Pulse mode. + (+) Configure External Clock source. + (+) Configure Complementary channels, break features and dead time. + (+) Configure Master and the Slave synchronization. + (+) Configure the DMA Burst Mode. + +@endverbatim + * @{ + */ + +/** + * @brief Initializes the TIM Output Compare Channels according to the specified + * parameters in the TIM_OC_InitTypeDef. + * @param htim TIM Output Compare handle + * @param sConfig TIM Output Compare configuration structure + * @param Channel TIM Channels to configure + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @arg TIM_CHANNEL_5: TIM Channel 5 selected + * @arg TIM_CHANNEL_6: TIM Channel 6 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OC_ConfigChannel(TIM_HandleTypeDef *htim, + const TIM_OC_InitTypeDef *sConfig, + uint32_t Channel) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_TIM_CHANNELS(Channel)); + assert_param(IS_TIM_OC_MODE(sConfig->OCMode)); + assert_param(IS_TIM_OC_POLARITY(sConfig->OCPolarity)); + + /* Process Locked */ + __HAL_LOCK(htim); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Check the parameters */ + assert_param(IS_TIM_CC1_INSTANCE(htim->Instance)); + + /* Configure the TIM Channel 1 in Output Compare */ + TIM_OC1_SetConfig(htim->Instance, sConfig); + break; + } + + case TIM_CHANNEL_2: + { + /* Check the parameters */ + assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); + + /* Configure the TIM Channel 2 in Output Compare */ + TIM_OC2_SetConfig(htim->Instance, sConfig); + break; + } + + case TIM_CHANNEL_3: + { + /* Check the parameters */ + assert_param(IS_TIM_CC3_INSTANCE(htim->Instance)); + + /* Configure the TIM Channel 3 in Output Compare */ + TIM_OC3_SetConfig(htim->Instance, sConfig); + break; + } + + case TIM_CHANNEL_4: + { + /* Check the parameters */ + assert_param(IS_TIM_CC4_INSTANCE(htim->Instance)); + + /* Configure the TIM Channel 4 in Output Compare */ + TIM_OC4_SetConfig(htim->Instance, sConfig); + break; + } + + case TIM_CHANNEL_5: + { + /* Check the parameters */ + assert_param(IS_TIM_CC5_INSTANCE(htim->Instance)); + + /* Configure the TIM Channel 5 in Output Compare */ + TIM_OC5_SetConfig(htim->Instance, sConfig); + break; + } + + case TIM_CHANNEL_6: + { + /* Check the parameters */ + assert_param(IS_TIM_CC6_INSTANCE(htim->Instance)); + + /* Configure the TIM Channel 6 in Output Compare */ + TIM_OC6_SetConfig(htim->Instance, sConfig); + break; + } + + default: + status = HAL_ERROR; + break; + } + + __HAL_UNLOCK(htim); + + return status; +} + +/** + * @brief Initializes the TIM Input Capture Channels according to the specified + * parameters in the TIM_IC_InitTypeDef. + * @param htim TIM IC handle + * @param sConfig TIM Input Capture configuration structure + * @param Channel TIM Channel to configure + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_IC_ConfigChannel(TIM_HandleTypeDef *htim, const TIM_IC_InitTypeDef *sConfig, uint32_t Channel) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_TIM_CC1_INSTANCE(htim->Instance)); + assert_param(IS_TIM_IC_POLARITY(sConfig->ICPolarity)); + assert_param(IS_TIM_IC_SELECTION(sConfig->ICSelection)); + assert_param(IS_TIM_IC_PRESCALER(sConfig->ICPrescaler)); + assert_param(IS_TIM_IC_FILTER(sConfig->ICFilter)); + + /* Process Locked */ + __HAL_LOCK(htim); + + if (Channel == TIM_CHANNEL_1) + { + /* TI1 Configuration */ + TIM_TI1_SetConfig(htim->Instance, + sConfig->ICPolarity, + sConfig->ICSelection, + sConfig->ICFilter); + + /* Reset the IC1PSC Bits */ + htim->Instance->CCMR1 &= ~TIM_CCMR1_IC1PSC; + + /* Set the IC1PSC value */ + htim->Instance->CCMR1 |= sConfig->ICPrescaler; + } + else if (Channel == TIM_CHANNEL_2) + { + /* TI2 Configuration */ + assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); + + TIM_TI2_SetConfig(htim->Instance, + sConfig->ICPolarity, + sConfig->ICSelection, + sConfig->ICFilter); + + /* Reset the IC2PSC Bits */ + htim->Instance->CCMR1 &= ~TIM_CCMR1_IC2PSC; + + /* Set the IC2PSC value */ + htim->Instance->CCMR1 |= (sConfig->ICPrescaler << 8U); + } + else if (Channel == TIM_CHANNEL_3) + { + /* TI3 Configuration */ + assert_param(IS_TIM_CC3_INSTANCE(htim->Instance)); + + TIM_TI3_SetConfig(htim->Instance, + sConfig->ICPolarity, + sConfig->ICSelection, + sConfig->ICFilter); + + /* Reset the IC3PSC Bits */ + htim->Instance->CCMR2 &= ~TIM_CCMR2_IC3PSC; + + /* Set the IC3PSC value */ + htim->Instance->CCMR2 |= sConfig->ICPrescaler; + } + else if (Channel == TIM_CHANNEL_4) + { + /* TI4 Configuration */ + assert_param(IS_TIM_CC4_INSTANCE(htim->Instance)); + + TIM_TI4_SetConfig(htim->Instance, + sConfig->ICPolarity, + sConfig->ICSelection, + sConfig->ICFilter); + + /* Reset the IC4PSC Bits */ + htim->Instance->CCMR2 &= ~TIM_CCMR2_IC4PSC; + + /* Set the IC4PSC value */ + htim->Instance->CCMR2 |= (sConfig->ICPrescaler << 8U); + } + else + { + status = HAL_ERROR; + } + + __HAL_UNLOCK(htim); + + return status; +} + +/** + * @brief Initializes the TIM PWM channels according to the specified + * parameters in the TIM_OC_InitTypeDef. + * @param htim TIM PWM handle + * @param sConfig TIM PWM configuration structure + * @param Channel TIM Channels to be configured + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @arg TIM_CHANNEL_5: TIM Channel 5 selected + * @arg TIM_CHANNEL_6: TIM Channel 6 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_PWM_ConfigChannel(TIM_HandleTypeDef *htim, + const TIM_OC_InitTypeDef *sConfig, + uint32_t Channel) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_TIM_CHANNELS(Channel)); + assert_param(IS_TIM_PWM_MODE(sConfig->OCMode)); + assert_param(IS_TIM_OC_POLARITY(sConfig->OCPolarity)); + assert_param(IS_TIM_FAST_STATE(sConfig->OCFastMode)); + + /* Process Locked */ + __HAL_LOCK(htim); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Check the parameters */ + assert_param(IS_TIM_CC1_INSTANCE(htim->Instance)); + + /* Configure the Channel 1 in PWM mode */ + TIM_OC1_SetConfig(htim->Instance, sConfig); + + /* Set the Preload enable bit for channel1 */ + htim->Instance->CCMR1 |= TIM_CCMR1_OC1PE; + + /* Configure the Output Fast mode */ + htim->Instance->CCMR1 &= ~TIM_CCMR1_OC1FE; + htim->Instance->CCMR1 |= sConfig->OCFastMode; + break; + } + + case TIM_CHANNEL_2: + { + /* Check the parameters */ + assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); + + /* Configure the Channel 2 in PWM mode */ + TIM_OC2_SetConfig(htim->Instance, sConfig); + + /* Set the Preload enable bit for channel2 */ + htim->Instance->CCMR1 |= TIM_CCMR1_OC2PE; + + /* Configure the Output Fast mode */ + htim->Instance->CCMR1 &= ~TIM_CCMR1_OC2FE; + htim->Instance->CCMR1 |= sConfig->OCFastMode << 8U; + break; + } + + case TIM_CHANNEL_3: + { + /* Check the parameters */ + assert_param(IS_TIM_CC3_INSTANCE(htim->Instance)); + + /* Configure the Channel 3 in PWM mode */ + TIM_OC3_SetConfig(htim->Instance, sConfig); + + /* Set the Preload enable bit for channel3 */ + htim->Instance->CCMR2 |= TIM_CCMR2_OC3PE; + + /* Configure the Output Fast mode */ + htim->Instance->CCMR2 &= ~TIM_CCMR2_OC3FE; + htim->Instance->CCMR2 |= sConfig->OCFastMode; + break; + } + + case TIM_CHANNEL_4: + { + /* Check the parameters */ + assert_param(IS_TIM_CC4_INSTANCE(htim->Instance)); + + /* Configure the Channel 4 in PWM mode */ + TIM_OC4_SetConfig(htim->Instance, sConfig); + + /* Set the Preload enable bit for channel4 */ + htim->Instance->CCMR2 |= TIM_CCMR2_OC4PE; + + /* Configure the Output Fast mode */ + htim->Instance->CCMR2 &= ~TIM_CCMR2_OC4FE; + htim->Instance->CCMR2 |= sConfig->OCFastMode << 8U; + break; + } + + case TIM_CHANNEL_5: + { + /* Check the parameters */ + assert_param(IS_TIM_CC5_INSTANCE(htim->Instance)); + + /* Configure the Channel 5 in PWM mode */ + TIM_OC5_SetConfig(htim->Instance, sConfig); + + /* Set the Preload enable bit for channel5*/ + htim->Instance->CCMR3 |= TIM_CCMR3_OC5PE; + + /* Configure the Output Fast mode */ + htim->Instance->CCMR3 &= ~TIM_CCMR3_OC5FE; + htim->Instance->CCMR3 |= sConfig->OCFastMode; + break; + } + + case TIM_CHANNEL_6: + { + /* Check the parameters */ + assert_param(IS_TIM_CC6_INSTANCE(htim->Instance)); + + /* Configure the Channel 6 in PWM mode */ + TIM_OC6_SetConfig(htim->Instance, sConfig); + + /* Set the Preload enable bit for channel6 */ + htim->Instance->CCMR3 |= TIM_CCMR3_OC6PE; + + /* Configure the Output Fast mode */ + htim->Instance->CCMR3 &= ~TIM_CCMR3_OC6FE; + htim->Instance->CCMR3 |= sConfig->OCFastMode << 8U; + break; + } + + default: + status = HAL_ERROR; + break; + } + + __HAL_UNLOCK(htim); + + return status; +} + +/** + * @brief Initializes the TIM One Pulse Channels according to the specified + * parameters in the TIM_OnePulse_InitTypeDef. + * @param htim TIM One Pulse handle + * @param sConfig TIM One Pulse configuration structure + * @param OutputChannel TIM output channel to configure + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @param InputChannel TIM input Channel to configure + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @note To output a waveform with a minimum delay user can enable the fast + * mode by calling the @ref __HAL_TIM_ENABLE_OCxFAST macro. Then CCx + * output is forced in response to the edge detection on TIx input, + * without taking in account the comparison. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OnePulse_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OnePulse_InitTypeDef *sConfig, + uint32_t OutputChannel, uint32_t InputChannel) +{ + HAL_StatusTypeDef status = HAL_OK; + TIM_OC_InitTypeDef temp1; + + /* Check the parameters */ + assert_param(IS_TIM_OPM_CHANNELS(OutputChannel)); + assert_param(IS_TIM_OPM_CHANNELS(InputChannel)); + + if (OutputChannel != InputChannel) + { + /* Process Locked */ + __HAL_LOCK(htim); + + htim->State = HAL_TIM_STATE_BUSY; + + /* Extract the Output compare configuration from sConfig structure */ + temp1.OCMode = sConfig->OCMode; + temp1.Pulse = sConfig->Pulse; + temp1.OCPolarity = sConfig->OCPolarity; + temp1.OCNPolarity = sConfig->OCNPolarity; + temp1.OCIdleState = sConfig->OCIdleState; + temp1.OCNIdleState = sConfig->OCNIdleState; + + switch (OutputChannel) + { + case TIM_CHANNEL_1: + { + assert_param(IS_TIM_CC1_INSTANCE(htim->Instance)); + + TIM_OC1_SetConfig(htim->Instance, &temp1); + break; + } + + case TIM_CHANNEL_2: + { + assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); + + TIM_OC2_SetConfig(htim->Instance, &temp1); + break; + } + + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + switch (InputChannel) + { + case TIM_CHANNEL_1: + { + assert_param(IS_TIM_CC1_INSTANCE(htim->Instance)); + + TIM_TI1_SetConfig(htim->Instance, sConfig->ICPolarity, + sConfig->ICSelection, sConfig->ICFilter); + + /* Reset the IC1PSC Bits */ + htim->Instance->CCMR1 &= ~TIM_CCMR1_IC1PSC; + + /* Select the Trigger source */ + htim->Instance->SMCR &= ~TIM_SMCR_TS; + htim->Instance->SMCR |= TIM_TS_TI1FP1; + + /* Select the Slave Mode */ + htim->Instance->SMCR &= ~TIM_SMCR_SMS; + htim->Instance->SMCR |= TIM_SLAVEMODE_TRIGGER; + break; + } + + case TIM_CHANNEL_2: + { + assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); + + TIM_TI2_SetConfig(htim->Instance, sConfig->ICPolarity, + sConfig->ICSelection, sConfig->ICFilter); + + /* Reset the IC2PSC Bits */ + htim->Instance->CCMR1 &= ~TIM_CCMR1_IC2PSC; + + /* Select the Trigger source */ + htim->Instance->SMCR &= ~TIM_SMCR_TS; + htim->Instance->SMCR |= TIM_TS_TI2FP2; + + /* Select the Slave Mode */ + htim->Instance->SMCR &= ~TIM_SMCR_SMS; + htim->Instance->SMCR |= TIM_SLAVEMODE_TRIGGER; + break; + } + + default: + status = HAL_ERROR; + break; + } + } + + htim->State = HAL_TIM_STATE_READY; + + __HAL_UNLOCK(htim); + + return status; + } + else + { + return HAL_ERROR; + } +} + +/** + * @brief Configure the DMA Burst to transfer Data from the memory to the TIM peripheral + * @param htim TIM handle + * @param BurstBaseAddress TIM Base address from where the DMA will start the Data write + * This parameter can be one of the following values: + * @arg TIM_DMABASE_CR1 + * @arg TIM_DMABASE_CR2 + * @arg TIM_DMABASE_SMCR + * @arg TIM_DMABASE_DIER + * @arg TIM_DMABASE_SR + * @arg TIM_DMABASE_EGR + * @arg TIM_DMABASE_CCMR1 + * @arg TIM_DMABASE_CCMR2 + * @arg TIM_DMABASE_CCER + * @arg TIM_DMABASE_CNT + * @arg TIM_DMABASE_PSC + * @arg TIM_DMABASE_ARR + * @arg TIM_DMABASE_RCR + * @arg TIM_DMABASE_CCR1 + * @arg TIM_DMABASE_CCR2 + * @arg TIM_DMABASE_CCR3 + * @arg TIM_DMABASE_CCR4 + * @arg TIM_DMABASE_BDTR + * @arg TIM_DMABASE_OR1 + * @arg TIM_DMABASE_CCMR3 + * @arg TIM_DMABASE_CCR5 + * @arg TIM_DMABASE_CCR6 + * @arg TIM_DMABASE_OR2 + * @arg TIM_DMABASE_OR3 + * @param BurstRequestSrc TIM DMA Request sources + * This parameter can be one of the following values: + * @arg TIM_DMA_UPDATE: TIM update Interrupt source + * @arg TIM_DMA_CC1: TIM Capture Compare 1 DMA source + * @arg TIM_DMA_CC2: TIM Capture Compare 2 DMA source + * @arg TIM_DMA_CC3: TIM Capture Compare 3 DMA source + * @arg TIM_DMA_CC4: TIM Capture Compare 4 DMA source + * @arg TIM_DMA_COM: TIM Commutation DMA source + * @arg TIM_DMA_TRIGGER: TIM Trigger DMA source + * @param BurstBuffer The Buffer address. + * @param BurstLength DMA Burst length. This parameter can be one value + * between: TIM_DMABURSTLENGTH_1TRANSFER and TIM_DMABURSTLENGTH_18TRANSFERS. + * @note This function should be used only when BurstLength is equal to DMA data transfer length. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, + uint32_t BurstRequestSrc, const uint32_t *BurstBuffer, + uint32_t BurstLength) +{ + HAL_StatusTypeDef status; + + status = HAL_TIM_DMABurst_MultiWriteStart(htim, BurstBaseAddress, BurstRequestSrc, BurstBuffer, BurstLength, + ((BurstLength) >> 8U) + 1U); + + + + return status; +} + +/** + * @brief Configure the DMA Burst to transfer multiple Data from the memory to the TIM peripheral + * @param htim TIM handle + * @param BurstBaseAddress TIM Base address from where the DMA will start the Data write + * This parameter can be one of the following values: + * @arg TIM_DMABASE_CR1 + * @arg TIM_DMABASE_CR2 + * @arg TIM_DMABASE_SMCR + * @arg TIM_DMABASE_DIER + * @arg TIM_DMABASE_SR + * @arg TIM_DMABASE_EGR + * @arg TIM_DMABASE_CCMR1 + * @arg TIM_DMABASE_CCMR2 + * @arg TIM_DMABASE_CCER + * @arg TIM_DMABASE_CNT + * @arg TIM_DMABASE_PSC + * @arg TIM_DMABASE_ARR + * @arg TIM_DMABASE_RCR + * @arg TIM_DMABASE_CCR1 + * @arg TIM_DMABASE_CCR2 + * @arg TIM_DMABASE_CCR3 + * @arg TIM_DMABASE_CCR4 + * @arg TIM_DMABASE_BDTR + * @arg TIM_DMABASE_OR1 + * @arg TIM_DMABASE_CCMR3 + * @arg TIM_DMABASE_CCR5 + * @arg TIM_DMABASE_CCR6 + * @arg TIM_DMABASE_OR2 + * @arg TIM_DMABASE_OR3 + * @param BurstRequestSrc TIM DMA Request sources + * This parameter can be one of the following values: + * @arg TIM_DMA_UPDATE: TIM update Interrupt source + * @arg TIM_DMA_CC1: TIM Capture Compare 1 DMA source + * @arg TIM_DMA_CC2: TIM Capture Compare 2 DMA source + * @arg TIM_DMA_CC3: TIM Capture Compare 3 DMA source + * @arg TIM_DMA_CC4: TIM Capture Compare 4 DMA source + * @arg TIM_DMA_COM: TIM Commutation DMA source + * @arg TIM_DMA_TRIGGER: TIM Trigger DMA source + * @param BurstBuffer The Buffer address. + * @param BurstLength DMA Burst length. This parameter can be one value + * between: TIM_DMABURSTLENGTH_1TRANSFER and TIM_DMABURSTLENGTH_18TRANSFERS. + * @param DataLength Data length. This parameter can be one value + * between 1 and 0xFFFF. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_DMABurst_MultiWriteStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, + uint32_t BurstRequestSrc, const uint32_t *BurstBuffer, + uint32_t BurstLength, uint32_t DataLength) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_TIM_DMABURST_INSTANCE(htim->Instance)); + assert_param(IS_TIM_DMA_BASE(BurstBaseAddress)); + assert_param(IS_TIM_DMA_SOURCE(BurstRequestSrc)); + assert_param(IS_TIM_DMA_LENGTH(BurstLength)); + assert_param(IS_TIM_DMA_DATA_LENGTH(DataLength)); + + if (htim->DMABurstState == HAL_DMA_BURST_STATE_BUSY) + { + return HAL_BUSY; + } + else if (htim->DMABurstState == HAL_DMA_BURST_STATE_READY) + { + if ((BurstBuffer == NULL) && (BurstLength > 0U)) + { + return HAL_ERROR; + } + else + { + htim->DMABurstState = HAL_DMA_BURST_STATE_BUSY; + } + } + else + { + /* nothing to do */ + } + + switch (BurstRequestSrc) + { + case TIM_DMA_UPDATE: + { + /* Set the DMA Period elapsed callbacks */ + htim->hdma[TIM_DMA_ID_UPDATE]->XferCpltCallback = TIM_DMAPeriodElapsedCplt; + htim->hdma[TIM_DMA_ID_UPDATE]->XferHalfCpltCallback = TIM_DMAPeriodElapsedHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_UPDATE]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_UPDATE], (uint32_t)BurstBuffer, + (uint32_t)&htim->Instance->DMAR, DataLength) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + break; + } + case TIM_DMA_CC1: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMADelayPulseCplt; + htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)BurstBuffer, + (uint32_t)&htim->Instance->DMAR, DataLength) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + break; + } + case TIM_DMA_CC2: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMADelayPulseCplt; + htim->hdma[TIM_DMA_ID_CC2]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)BurstBuffer, + (uint32_t)&htim->Instance->DMAR, DataLength) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + break; + } + case TIM_DMA_CC3: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMADelayPulseCplt; + htim->hdma[TIM_DMA_ID_CC3]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)BurstBuffer, + (uint32_t)&htim->Instance->DMAR, DataLength) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + break; + } + case TIM_DMA_CC4: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = TIM_DMADelayPulseCplt; + htim->hdma[TIM_DMA_ID_CC4]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)BurstBuffer, + (uint32_t)&htim->Instance->DMAR, DataLength) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + break; + } + case TIM_DMA_COM: + { + /* Set the DMA commutation callbacks */ + htim->hdma[TIM_DMA_ID_COMMUTATION]->XferCpltCallback = TIMEx_DMACommutationCplt; + htim->hdma[TIM_DMA_ID_COMMUTATION]->XferHalfCpltCallback = TIMEx_DMACommutationHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_COMMUTATION]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_COMMUTATION], (uint32_t)BurstBuffer, + (uint32_t)&htim->Instance->DMAR, DataLength) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + break; + } + case TIM_DMA_TRIGGER: + { + /* Set the DMA trigger callbacks */ + htim->hdma[TIM_DMA_ID_TRIGGER]->XferCpltCallback = TIM_DMATriggerCplt; + htim->hdma[TIM_DMA_ID_TRIGGER]->XferHalfCpltCallback = TIM_DMATriggerHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_TRIGGER]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_TRIGGER], (uint32_t)BurstBuffer, + (uint32_t)&htim->Instance->DMAR, DataLength) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + break; + } + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Configure the DMA Burst Mode */ + htim->Instance->DCR = (BurstBaseAddress | BurstLength); + /* Enable the TIM DMA Request */ + __HAL_TIM_ENABLE_DMA(htim, BurstRequestSrc); + } + + /* Return function status */ + return status; +} + +/** + * @brief Stops the TIM DMA Burst mode + * @param htim TIM handle + * @param BurstRequestSrc TIM DMA Request sources to disable + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStop(TIM_HandleTypeDef *htim, uint32_t BurstRequestSrc) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_TIM_DMA_SOURCE(BurstRequestSrc)); + + /* Abort the DMA transfer (at least disable the DMA channel) */ + switch (BurstRequestSrc) + { + case TIM_DMA_UPDATE: + { + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_UPDATE]); + break; + } + case TIM_DMA_CC1: + { + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]); + break; + } + case TIM_DMA_CC2: + { + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC2]); + break; + } + case TIM_DMA_CC3: + { + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC3]); + break; + } + case TIM_DMA_CC4: + { + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC4]); + break; + } + case TIM_DMA_COM: + { + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_COMMUTATION]); + break; + } + case TIM_DMA_TRIGGER: + { + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_TRIGGER]); + break; + } + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Disable the TIM Update DMA request */ + __HAL_TIM_DISABLE_DMA(htim, BurstRequestSrc); + + /* Change the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_READY; + } + + /* Return function status */ + return status; +} + +/** + * @brief Configure the DMA Burst to transfer Data from the TIM peripheral to the memory + * @param htim TIM handle + * @param BurstBaseAddress TIM Base address from where the DMA will start the Data read + * This parameter can be one of the following values: + * @arg TIM_DMABASE_CR1 + * @arg TIM_DMABASE_CR2 + * @arg TIM_DMABASE_SMCR + * @arg TIM_DMABASE_DIER + * @arg TIM_DMABASE_SR + * @arg TIM_DMABASE_EGR + * @arg TIM_DMABASE_CCMR1 + * @arg TIM_DMABASE_CCMR2 + * @arg TIM_DMABASE_CCER + * @arg TIM_DMABASE_CNT + * @arg TIM_DMABASE_PSC + * @arg TIM_DMABASE_ARR + * @arg TIM_DMABASE_RCR + * @arg TIM_DMABASE_CCR1 + * @arg TIM_DMABASE_CCR2 + * @arg TIM_DMABASE_CCR3 + * @arg TIM_DMABASE_CCR4 + * @arg TIM_DMABASE_BDTR + * @arg TIM_DMABASE_OR1 + * @arg TIM_DMABASE_CCMR3 + * @arg TIM_DMABASE_CCR5 + * @arg TIM_DMABASE_CCR6 + * @arg TIM_DMABASE_OR2 + * @arg TIM_DMABASE_OR3 + * @param BurstRequestSrc TIM DMA Request sources + * This parameter can be one of the following values: + * @arg TIM_DMA_UPDATE: TIM update Interrupt source + * @arg TIM_DMA_CC1: TIM Capture Compare 1 DMA source + * @arg TIM_DMA_CC2: TIM Capture Compare 2 DMA source + * @arg TIM_DMA_CC3: TIM Capture Compare 3 DMA source + * @arg TIM_DMA_CC4: TIM Capture Compare 4 DMA source + * @arg TIM_DMA_COM: TIM Commutation DMA source + * @arg TIM_DMA_TRIGGER: TIM Trigger DMA source + * @param BurstBuffer The Buffer address. + * @param BurstLength DMA Burst length. This parameter can be one value + * between: TIM_DMABURSTLENGTH_1TRANSFER and TIM_DMABURSTLENGTH_18TRANSFERS. + * @note This function should be used only when BurstLength is equal to DMA data transfer length. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, + uint32_t BurstRequestSrc, uint32_t *BurstBuffer, uint32_t BurstLength) +{ + HAL_StatusTypeDef status; + + status = HAL_TIM_DMABurst_MultiReadStart(htim, BurstBaseAddress, BurstRequestSrc, BurstBuffer, BurstLength, + ((BurstLength) >> 8U) + 1U); + + + return status; +} + +/** + * @brief Configure the DMA Burst to transfer Data from the TIM peripheral to the memory + * @param htim TIM handle + * @param BurstBaseAddress TIM Base address from where the DMA will start the Data read + * This parameter can be one of the following values: + * @arg TIM_DMABASE_CR1 + * @arg TIM_DMABASE_CR2 + * @arg TIM_DMABASE_SMCR + * @arg TIM_DMABASE_DIER + * @arg TIM_DMABASE_SR + * @arg TIM_DMABASE_EGR + * @arg TIM_DMABASE_CCMR1 + * @arg TIM_DMABASE_CCMR2 + * @arg TIM_DMABASE_CCER + * @arg TIM_DMABASE_CNT + * @arg TIM_DMABASE_PSC + * @arg TIM_DMABASE_ARR + * @arg TIM_DMABASE_RCR + * @arg TIM_DMABASE_CCR1 + * @arg TIM_DMABASE_CCR2 + * @arg TIM_DMABASE_CCR3 + * @arg TIM_DMABASE_CCR4 + * @arg TIM_DMABASE_BDTR + * @arg TIM_DMABASE_OR1 + * @arg TIM_DMABASE_CCMR3 + * @arg TIM_DMABASE_CCR5 + * @arg TIM_DMABASE_CCR6 + * @arg TIM_DMABASE_OR2 + * @arg TIM_DMABASE_OR3 + * @param BurstRequestSrc TIM DMA Request sources + * This parameter can be one of the following values: + * @arg TIM_DMA_UPDATE: TIM update Interrupt source + * @arg TIM_DMA_CC1: TIM Capture Compare 1 DMA source + * @arg TIM_DMA_CC2: TIM Capture Compare 2 DMA source + * @arg TIM_DMA_CC3: TIM Capture Compare 3 DMA source + * @arg TIM_DMA_CC4: TIM Capture Compare 4 DMA source + * @arg TIM_DMA_COM: TIM Commutation DMA source + * @arg TIM_DMA_TRIGGER: TIM Trigger DMA source + * @param BurstBuffer The Buffer address. + * @param BurstLength DMA Burst length. This parameter can be one value + * between: TIM_DMABURSTLENGTH_1TRANSFER and TIM_DMABURSTLENGTH_18TRANSFERS. + * @param DataLength Data length. This parameter can be one value + * between 1 and 0xFFFF. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_DMABurst_MultiReadStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, + uint32_t BurstRequestSrc, uint32_t *BurstBuffer, + uint32_t BurstLength, uint32_t DataLength) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_TIM_DMABURST_INSTANCE(htim->Instance)); + assert_param(IS_TIM_DMA_BASE(BurstBaseAddress)); + assert_param(IS_TIM_DMA_SOURCE(BurstRequestSrc)); + assert_param(IS_TIM_DMA_LENGTH(BurstLength)); + assert_param(IS_TIM_DMA_DATA_LENGTH(DataLength)); + + if (htim->DMABurstState == HAL_DMA_BURST_STATE_BUSY) + { + return HAL_BUSY; + } + else if (htim->DMABurstState == HAL_DMA_BURST_STATE_READY) + { + if ((BurstBuffer == NULL) && (BurstLength > 0U)) + { + return HAL_ERROR; + } + else + { + htim->DMABurstState = HAL_DMA_BURST_STATE_BUSY; + } + } + else + { + /* nothing to do */ + } + switch (BurstRequestSrc) + { + case TIM_DMA_UPDATE: + { + /* Set the DMA Period elapsed callbacks */ + htim->hdma[TIM_DMA_ID_UPDATE]->XferCpltCallback = TIM_DMAPeriodElapsedCplt; + htim->hdma[TIM_DMA_ID_UPDATE]->XferHalfCpltCallback = TIM_DMAPeriodElapsedHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_UPDATE]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_UPDATE], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, + DataLength) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + break; + } + case TIM_DMA_CC1: + { + /* Set the DMA capture callbacks */ + htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMACaptureCplt; + htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, + DataLength) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + break; + } + case TIM_DMA_CC2: + { + /* Set the DMA capture callbacks */ + htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMACaptureCplt; + htim->hdma[TIM_DMA_ID_CC2]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, + DataLength) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + break; + } + case TIM_DMA_CC3: + { + /* Set the DMA capture callbacks */ + htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMACaptureCplt; + htim->hdma[TIM_DMA_ID_CC3]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, + DataLength) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + break; + } + case TIM_DMA_CC4: + { + /* Set the DMA capture callbacks */ + htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = TIM_DMACaptureCplt; + htim->hdma[TIM_DMA_ID_CC4]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, + DataLength) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + break; + } + case TIM_DMA_COM: + { + /* Set the DMA commutation callbacks */ + htim->hdma[TIM_DMA_ID_COMMUTATION]->XferCpltCallback = TIMEx_DMACommutationCplt; + htim->hdma[TIM_DMA_ID_COMMUTATION]->XferHalfCpltCallback = TIMEx_DMACommutationHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_COMMUTATION]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_COMMUTATION], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, + DataLength) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + break; + } + case TIM_DMA_TRIGGER: + { + /* Set the DMA trigger callbacks */ + htim->hdma[TIM_DMA_ID_TRIGGER]->XferCpltCallback = TIM_DMATriggerCplt; + htim->hdma[TIM_DMA_ID_TRIGGER]->XferHalfCpltCallback = TIM_DMATriggerHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_TRIGGER]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_TRIGGER], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, + DataLength) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + break; + } + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Configure the DMA Burst Mode */ + htim->Instance->DCR = (BurstBaseAddress | BurstLength); + + /* Enable the TIM DMA Request */ + __HAL_TIM_ENABLE_DMA(htim, BurstRequestSrc); + } + + /* Return function status */ + return status; +} + +/** + * @brief Stop the DMA burst reading + * @param htim TIM handle + * @param BurstRequestSrc TIM DMA Request sources to disable. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStop(TIM_HandleTypeDef *htim, uint32_t BurstRequestSrc) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_TIM_DMA_SOURCE(BurstRequestSrc)); + + /* Abort the DMA transfer (at least disable the DMA channel) */ + switch (BurstRequestSrc) + { + case TIM_DMA_UPDATE: + { + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_UPDATE]); + break; + } + case TIM_DMA_CC1: + { + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]); + break; + } + case TIM_DMA_CC2: + { + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC2]); + break; + } + case TIM_DMA_CC3: + { + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC3]); + break; + } + case TIM_DMA_CC4: + { + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC4]); + break; + } + case TIM_DMA_COM: + { + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_COMMUTATION]); + break; + } + case TIM_DMA_TRIGGER: + { + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_TRIGGER]); + break; + } + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Disable the TIM Update DMA request */ + __HAL_TIM_DISABLE_DMA(htim, BurstRequestSrc); + + /* Change the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_READY; + } + + /* Return function status */ + return status; +} + +/** + * @brief Generate a software event + * @param htim TIM handle + * @param EventSource specifies the event source. + * This parameter can be one of the following values: + * @arg TIM_EVENTSOURCE_UPDATE: Timer update Event source + * @arg TIM_EVENTSOURCE_CC1: Timer Capture Compare 1 Event source + * @arg TIM_EVENTSOURCE_CC2: Timer Capture Compare 2 Event source + * @arg TIM_EVENTSOURCE_CC3: Timer Capture Compare 3 Event source + * @arg TIM_EVENTSOURCE_CC4: Timer Capture Compare 4 Event source + * @arg TIM_EVENTSOURCE_COM: Timer COM event source + * @arg TIM_EVENTSOURCE_TRIGGER: Timer Trigger Event source + * @arg TIM_EVENTSOURCE_BREAK: Timer Break event source + * @arg TIM_EVENTSOURCE_BREAK2: Timer Break2 event source + * @note Basic timers can only generate an update event. + * @note TIM_EVENTSOURCE_COM is relevant only with advanced timer instances. + * @note TIM_EVENTSOURCE_BREAK and TIM_EVENTSOURCE_BREAK2 are relevant + * only for timer instances supporting break input(s). + * @retval HAL status + */ + +HAL_StatusTypeDef HAL_TIM_GenerateEvent(TIM_HandleTypeDef *htim, uint32_t EventSource) +{ + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + assert_param(IS_TIM_EVENT_SOURCE(EventSource)); + + /* Process Locked */ + __HAL_LOCK(htim); + + /* Change the TIM state */ + htim->State = HAL_TIM_STATE_BUSY; + + /* Set the event sources */ + htim->Instance->EGR = EventSource; + + /* Change the TIM state */ + htim->State = HAL_TIM_STATE_READY; + + __HAL_UNLOCK(htim); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Configures the OCRef clear feature + * @param htim TIM handle + * @param sClearInputConfig pointer to a TIM_ClearInputConfigTypeDef structure that + * contains the OCREF clear feature and parameters for the TIM peripheral. + * @param Channel specifies the TIM Channel + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 + * @arg TIM_CHANNEL_2: TIM Channel 2 + * @arg TIM_CHANNEL_3: TIM Channel 3 + * @arg TIM_CHANNEL_4: TIM Channel 4 + * @arg TIM_CHANNEL_5: TIM Channel 5 + * @arg TIM_CHANNEL_6: TIM Channel 6 + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_ConfigOCrefClear(TIM_HandleTypeDef *htim, + const TIM_ClearInputConfigTypeDef *sClearInputConfig, + uint32_t Channel) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_TIM_OCXREF_CLEAR_INSTANCE(htim->Instance)); + assert_param(IS_TIM_CLEARINPUT_SOURCE(sClearInputConfig->ClearInputSource)); + + /* Process Locked */ + __HAL_LOCK(htim); + + htim->State = HAL_TIM_STATE_BUSY; + + switch (sClearInputConfig->ClearInputSource) + { + case TIM_CLEARINPUTSOURCE_NONE: + { + /* Clear the OCREF clear selection bit and the the ETR Bits */ + CLEAR_BIT(htim->Instance->SMCR, (TIM_SMCR_OCCS | TIM_SMCR_ETF | TIM_SMCR_ETPS | TIM_SMCR_ECE | TIM_SMCR_ETP)); + break; + } + case TIM_CLEARINPUTSOURCE_OCREFCLR: + { + /* Clear the OCREF clear selection bit */ + CLEAR_BIT(htim->Instance->SMCR, TIM_SMCR_OCCS); + break; + } + + case TIM_CLEARINPUTSOURCE_ETR: + { + /* Check the parameters */ + assert_param(IS_TIM_CLEARINPUT_POLARITY(sClearInputConfig->ClearInputPolarity)); + assert_param(IS_TIM_CLEARINPUT_PRESCALER(sClearInputConfig->ClearInputPrescaler)); + assert_param(IS_TIM_CLEARINPUT_FILTER(sClearInputConfig->ClearInputFilter)); + + /* When OCRef clear feature is used with ETR source, ETR prescaler must be off */ + if (sClearInputConfig->ClearInputPrescaler != TIM_CLEARINPUTPRESCALER_DIV1) + { + htim->State = HAL_TIM_STATE_READY; + __HAL_UNLOCK(htim); + return HAL_ERROR; + } + + TIM_ETR_SetConfig(htim->Instance, + sClearInputConfig->ClearInputPrescaler, + sClearInputConfig->ClearInputPolarity, + sClearInputConfig->ClearInputFilter); + + /* Set the OCREF clear selection bit */ + SET_BIT(htim->Instance->SMCR, TIM_SMCR_OCCS); + break; + } + + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + switch (Channel) + { + case TIM_CHANNEL_1: + { + if (sClearInputConfig->ClearInputState != (uint32_t)DISABLE) + { + /* Enable the OCREF clear feature for Channel 1 */ + SET_BIT(htim->Instance->CCMR1, TIM_CCMR1_OC1CE); + } + else + { + /* Disable the OCREF clear feature for Channel 1 */ + CLEAR_BIT(htim->Instance->CCMR1, TIM_CCMR1_OC1CE); + } + break; + } + case TIM_CHANNEL_2: + { + if (sClearInputConfig->ClearInputState != (uint32_t)DISABLE) + { + /* Enable the OCREF clear feature for Channel 2 */ + SET_BIT(htim->Instance->CCMR1, TIM_CCMR1_OC2CE); + } + else + { + /* Disable the OCREF clear feature for Channel 2 */ + CLEAR_BIT(htim->Instance->CCMR1, TIM_CCMR1_OC2CE); + } + break; + } + case TIM_CHANNEL_3: + { + if (sClearInputConfig->ClearInputState != (uint32_t)DISABLE) + { + /* Enable the OCREF clear feature for Channel 3 */ + SET_BIT(htim->Instance->CCMR2, TIM_CCMR2_OC3CE); + } + else + { + /* Disable the OCREF clear feature for Channel 3 */ + CLEAR_BIT(htim->Instance->CCMR2, TIM_CCMR2_OC3CE); + } + break; + } + case TIM_CHANNEL_4: + { + if (sClearInputConfig->ClearInputState != (uint32_t)DISABLE) + { + /* Enable the OCREF clear feature for Channel 4 */ + SET_BIT(htim->Instance->CCMR2, TIM_CCMR2_OC4CE); + } + else + { + /* Disable the OCREF clear feature for Channel 4 */ + CLEAR_BIT(htim->Instance->CCMR2, TIM_CCMR2_OC4CE); + } + break; + } + case TIM_CHANNEL_5: + { + if (sClearInputConfig->ClearInputState != (uint32_t)DISABLE) + { + /* Enable the OCREF clear feature for Channel 5 */ + SET_BIT(htim->Instance->CCMR3, TIM_CCMR3_OC5CE); + } + else + { + /* Disable the OCREF clear feature for Channel 5 */ + CLEAR_BIT(htim->Instance->CCMR3, TIM_CCMR3_OC5CE); + } + break; + } + case TIM_CHANNEL_6: + { + if (sClearInputConfig->ClearInputState != (uint32_t)DISABLE) + { + /* Enable the OCREF clear feature for Channel 6 */ + SET_BIT(htim->Instance->CCMR3, TIM_CCMR3_OC6CE); + } + else + { + /* Disable the OCREF clear feature for Channel 6 */ + CLEAR_BIT(htim->Instance->CCMR3, TIM_CCMR3_OC6CE); + } + break; + } + default: + break; + } + } + + htim->State = HAL_TIM_STATE_READY; + + __HAL_UNLOCK(htim); + + return status; +} + +/** + * @brief Configures the clock source to be used + * @param htim TIM handle + * @param sClockSourceConfig pointer to a TIM_ClockConfigTypeDef structure that + * contains the clock source information for the TIM peripheral. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_ConfigClockSource(TIM_HandleTypeDef *htim, const TIM_ClockConfigTypeDef *sClockSourceConfig) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t tmpsmcr; + + /* Process Locked */ + __HAL_LOCK(htim); + + htim->State = HAL_TIM_STATE_BUSY; + + /* Check the parameters */ + assert_param(IS_TIM_CLOCKSOURCE(sClockSourceConfig->ClockSource)); + + /* Reset the SMS, TS, ECE, ETPS and ETRF bits */ + tmpsmcr = htim->Instance->SMCR; + tmpsmcr &= ~(TIM_SMCR_SMS | TIM_SMCR_TS); + tmpsmcr &= ~(TIM_SMCR_ETF | TIM_SMCR_ETPS | TIM_SMCR_ECE | TIM_SMCR_ETP); + htim->Instance->SMCR = tmpsmcr; + + switch (sClockSourceConfig->ClockSource) + { + case TIM_CLOCKSOURCE_INTERNAL: + { + assert_param(IS_TIM_INSTANCE(htim->Instance)); + break; + } + + case TIM_CLOCKSOURCE_ETRMODE1: + { + /* Check whether or not the timer instance supports external trigger input mode 1 (ETRF)*/ + assert_param(IS_TIM_CLOCKSOURCE_ETRMODE1_INSTANCE(htim->Instance)); + + /* Check ETR input conditioning related parameters */ + assert_param(IS_TIM_CLOCKPRESCALER(sClockSourceConfig->ClockPrescaler)); + assert_param(IS_TIM_CLOCKPOLARITY(sClockSourceConfig->ClockPolarity)); + assert_param(IS_TIM_CLOCKFILTER(sClockSourceConfig->ClockFilter)); + + /* Configure the ETR Clock source */ + TIM_ETR_SetConfig(htim->Instance, + sClockSourceConfig->ClockPrescaler, + sClockSourceConfig->ClockPolarity, + sClockSourceConfig->ClockFilter); + + /* Select the External clock mode1 and the ETRF trigger */ + tmpsmcr = htim->Instance->SMCR; + tmpsmcr |= (TIM_SLAVEMODE_EXTERNAL1 | TIM_CLOCKSOURCE_ETRMODE1); + /* Write to TIMx SMCR */ + htim->Instance->SMCR = tmpsmcr; + break; + } + + case TIM_CLOCKSOURCE_ETRMODE2: + { + /* Check whether or not the timer instance supports external trigger input mode 2 (ETRF)*/ + assert_param(IS_TIM_CLOCKSOURCE_ETRMODE2_INSTANCE(htim->Instance)); + + /* Check ETR input conditioning related parameters */ + assert_param(IS_TIM_CLOCKPRESCALER(sClockSourceConfig->ClockPrescaler)); + assert_param(IS_TIM_CLOCKPOLARITY(sClockSourceConfig->ClockPolarity)); + assert_param(IS_TIM_CLOCKFILTER(sClockSourceConfig->ClockFilter)); + + /* Configure the ETR Clock source */ + TIM_ETR_SetConfig(htim->Instance, + sClockSourceConfig->ClockPrescaler, + sClockSourceConfig->ClockPolarity, + sClockSourceConfig->ClockFilter); + /* Enable the External clock mode2 */ + htim->Instance->SMCR |= TIM_SMCR_ECE; + break; + } + + case TIM_CLOCKSOURCE_TI1: + { + /* Check whether or not the timer instance supports external clock mode 1 */ + assert_param(IS_TIM_CLOCKSOURCE_TIX_INSTANCE(htim->Instance)); + + /* Check TI1 input conditioning related parameters */ + assert_param(IS_TIM_CLOCKPOLARITY(sClockSourceConfig->ClockPolarity)); + assert_param(IS_TIM_CLOCKFILTER(sClockSourceConfig->ClockFilter)); + + TIM_TI1_ConfigInputStage(htim->Instance, + sClockSourceConfig->ClockPolarity, + sClockSourceConfig->ClockFilter); + TIM_ITRx_SetConfig(htim->Instance, TIM_CLOCKSOURCE_TI1); + break; + } + + case TIM_CLOCKSOURCE_TI2: + { + /* Check whether or not the timer instance supports external clock mode 1 (ETRF)*/ + assert_param(IS_TIM_CLOCKSOURCE_TIX_INSTANCE(htim->Instance)); + + /* Check TI2 input conditioning related parameters */ + assert_param(IS_TIM_CLOCKPOLARITY(sClockSourceConfig->ClockPolarity)); + assert_param(IS_TIM_CLOCKFILTER(sClockSourceConfig->ClockFilter)); + + TIM_TI2_ConfigInputStage(htim->Instance, + sClockSourceConfig->ClockPolarity, + sClockSourceConfig->ClockFilter); + TIM_ITRx_SetConfig(htim->Instance, TIM_CLOCKSOURCE_TI2); + break; + } + + case TIM_CLOCKSOURCE_TI1ED: + { + /* Check whether or not the timer instance supports external clock mode 1 */ + assert_param(IS_TIM_CLOCKSOURCE_TIX_INSTANCE(htim->Instance)); + + /* Check TI1 input conditioning related parameters */ + assert_param(IS_TIM_CLOCKPOLARITY(sClockSourceConfig->ClockPolarity)); + assert_param(IS_TIM_CLOCKFILTER(sClockSourceConfig->ClockFilter)); + + TIM_TI1_ConfigInputStage(htim->Instance, + sClockSourceConfig->ClockPolarity, + sClockSourceConfig->ClockFilter); + TIM_ITRx_SetConfig(htim->Instance, TIM_CLOCKSOURCE_TI1ED); + break; + } + + case TIM_CLOCKSOURCE_ITR0: + case TIM_CLOCKSOURCE_ITR1: + case TIM_CLOCKSOURCE_ITR2: + case TIM_CLOCKSOURCE_ITR3: + { + /* Check whether or not the timer instance supports internal trigger input */ + assert_param(IS_TIM_CLOCKSOURCE_ITRX_INSTANCE(htim->Instance)); + + TIM_ITRx_SetConfig(htim->Instance, sClockSourceConfig->ClockSource); + break; + } + + default: + status = HAL_ERROR; + break; + } + htim->State = HAL_TIM_STATE_READY; + + __HAL_UNLOCK(htim); + + return status; +} + +/** + * @brief Selects the signal connected to the TI1 input: direct from CH1_input + * or a XOR combination between CH1_input, CH2_input & CH3_input + * @param htim TIM handle. + * @param TI1_Selection Indicate whether or not channel 1 is connected to the + * output of a XOR gate. + * This parameter can be one of the following values: + * @arg TIM_TI1SELECTION_CH1: The TIMx_CH1 pin is connected to TI1 input + * @arg TIM_TI1SELECTION_XORCOMBINATION: The TIMx_CH1, CH2 and CH3 + * pins are connected to the TI1 input (XOR combination) + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_ConfigTI1Input(TIM_HandleTypeDef *htim, uint32_t TI1_Selection) +{ + uint32_t tmpcr2; + + /* Check the parameters */ + assert_param(IS_TIM_XOR_INSTANCE(htim->Instance)); + assert_param(IS_TIM_TI1SELECTION(TI1_Selection)); + + /* Get the TIMx CR2 register value */ + tmpcr2 = htim->Instance->CR2; + + /* Reset the TI1 selection */ + tmpcr2 &= ~TIM_CR2_TI1S; + + /* Set the TI1 selection */ + tmpcr2 |= TI1_Selection; + + /* Write to TIMxCR2 */ + htim->Instance->CR2 = tmpcr2; + + return HAL_OK; +} + +/** + * @brief Configures the TIM in Slave mode + * @param htim TIM handle. + * @param sSlaveConfig pointer to a TIM_SlaveConfigTypeDef structure that + * contains the selected trigger (internal trigger input, filtered + * timer input or external trigger input) and the Slave mode + * (Disable, Reset, Gated, Trigger, External clock mode 1). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_SlaveConfigSynchro(TIM_HandleTypeDef *htim, const TIM_SlaveConfigTypeDef *sSlaveConfig) +{ + /* Check the parameters */ + assert_param(IS_TIM_SLAVE_INSTANCE(htim->Instance)); + assert_param(IS_TIM_SLAVE_MODE(sSlaveConfig->SlaveMode)); + assert_param(IS_TIM_TRIGGER_SELECTION(sSlaveConfig->InputTrigger)); + + __HAL_LOCK(htim); + + htim->State = HAL_TIM_STATE_BUSY; + + if (TIM_SlaveTimer_SetConfig(htim, sSlaveConfig) != HAL_OK) + { + htim->State = HAL_TIM_STATE_READY; + __HAL_UNLOCK(htim); + return HAL_ERROR; + } + + /* Disable Trigger Interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_TRIGGER); + + /* Disable Trigger DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_TRIGGER); + + htim->State = HAL_TIM_STATE_READY; + + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Configures the TIM in Slave mode in interrupt mode + * @param htim TIM handle. + * @param sSlaveConfig pointer to a TIM_SlaveConfigTypeDef structure that + * contains the selected trigger (internal trigger input, filtered + * timer input or external trigger input) and the Slave mode + * (Disable, Reset, Gated, Trigger, External clock mode 1). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_SlaveConfigSynchro_IT(TIM_HandleTypeDef *htim, + const TIM_SlaveConfigTypeDef *sSlaveConfig) +{ + /* Check the parameters */ + assert_param(IS_TIM_SLAVE_INSTANCE(htim->Instance)); + assert_param(IS_TIM_SLAVE_MODE(sSlaveConfig->SlaveMode)); + assert_param(IS_TIM_TRIGGER_SELECTION(sSlaveConfig->InputTrigger)); + + __HAL_LOCK(htim); + + htim->State = HAL_TIM_STATE_BUSY; + + if (TIM_SlaveTimer_SetConfig(htim, sSlaveConfig) != HAL_OK) + { + htim->State = HAL_TIM_STATE_READY; + __HAL_UNLOCK(htim); + return HAL_ERROR; + } + + /* Enable Trigger Interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_TRIGGER); + + /* Disable Trigger DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_TRIGGER); + + htim->State = HAL_TIM_STATE_READY; + + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Read the captured value from Capture Compare unit + * @param htim TIM handle. + * @param Channel TIM Channels to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval Captured value + */ +uint32_t HAL_TIM_ReadCapturedValue(const TIM_HandleTypeDef *htim, uint32_t Channel) +{ + uint32_t tmpreg = 0U; + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Check the parameters */ + assert_param(IS_TIM_CC1_INSTANCE(htim->Instance)); + + /* Return the capture 1 value */ + tmpreg = htim->Instance->CCR1; + + break; + } + case TIM_CHANNEL_2: + { + /* Check the parameters */ + assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); + + /* Return the capture 2 value */ + tmpreg = htim->Instance->CCR2; + + break; + } + + case TIM_CHANNEL_3: + { + /* Check the parameters */ + assert_param(IS_TIM_CC3_INSTANCE(htim->Instance)); + + /* Return the capture 3 value */ + tmpreg = htim->Instance->CCR3; + + break; + } + + case TIM_CHANNEL_4: + { + /* Check the parameters */ + assert_param(IS_TIM_CC4_INSTANCE(htim->Instance)); + + /* Return the capture 4 value */ + tmpreg = htim->Instance->CCR4; + + break; + } + + default: + break; + } + + return tmpreg; +} + +/** + * @} + */ + +/** @defgroup TIM_Exported_Functions_Group9 TIM Callbacks functions + * @brief TIM Callbacks functions + * +@verbatim + ============================================================================== + ##### TIM Callbacks functions ##### + ============================================================================== + [..] + This section provides TIM callback functions: + (+) TIM Period elapsed callback + (+) TIM Output Compare callback + (+) TIM Input capture callback + (+) TIM Trigger callback + (+) TIM Error callback + +@endverbatim + * @{ + */ + +/** + * @brief Period elapsed callback in non-blocking mode + * @param htim TIM handle + * @retval None + */ +__weak void HAL_TIM_PeriodElapsedCallback(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_PeriodElapsedCallback could be implemented in the user file + */ +} + +/** + * @brief Period elapsed half complete callback in non-blocking mode + * @param htim TIM handle + * @retval None + */ +__weak void HAL_TIM_PeriodElapsedHalfCpltCallback(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_PeriodElapsedHalfCpltCallback could be implemented in the user file + */ +} + +/** + * @brief Output Compare callback in non-blocking mode + * @param htim TIM OC handle + * @retval None + */ +__weak void HAL_TIM_OC_DelayElapsedCallback(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_OC_DelayElapsedCallback could be implemented in the user file + */ +} + +/** + * @brief Input Capture callback in non-blocking mode + * @param htim TIM IC handle + * @retval None + */ +__weak void HAL_TIM_IC_CaptureCallback(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_IC_CaptureCallback could be implemented in the user file + */ +} + +/** + * @brief Input Capture half complete callback in non-blocking mode + * @param htim TIM IC handle + * @retval None + */ +__weak void HAL_TIM_IC_CaptureHalfCpltCallback(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_IC_CaptureHalfCpltCallback could be implemented in the user file + */ +} + +/** + * @brief PWM Pulse finished callback in non-blocking mode + * @param htim TIM handle + * @retval None + */ +__weak void HAL_TIM_PWM_PulseFinishedCallback(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_PWM_PulseFinishedCallback could be implemented in the user file + */ +} + +/** + * @brief PWM Pulse finished half complete callback in non-blocking mode + * @param htim TIM handle + * @retval None + */ +__weak void HAL_TIM_PWM_PulseFinishedHalfCpltCallback(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_PWM_PulseFinishedHalfCpltCallback could be implemented in the user file + */ +} + +/** + * @brief Hall Trigger detection callback in non-blocking mode + * @param htim TIM handle + * @retval None + */ +__weak void HAL_TIM_TriggerCallback(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_TriggerCallback could be implemented in the user file + */ +} + +/** + * @brief Hall Trigger detection half complete callback in non-blocking mode + * @param htim TIM handle + * @retval None + */ +__weak void HAL_TIM_TriggerHalfCpltCallback(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_TriggerHalfCpltCallback could be implemented in the user file + */ +} + +/** + * @brief Timer error callback in non-blocking mode + * @param htim TIM handle + * @retval None + */ +__weak void HAL_TIM_ErrorCallback(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_ErrorCallback could be implemented in the user file + */ +} + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) +/** + * @brief Register a User TIM callback to be used instead of the weak predefined callback + * @param htim tim handle + * @param CallbackID ID of the callback to be registered + * This parameter can be one of the following values: + * @arg @ref HAL_TIM_BASE_MSPINIT_CB_ID Base MspInit Callback ID + * @arg @ref HAL_TIM_BASE_MSPDEINIT_CB_ID Base MspDeInit Callback ID + * @arg @ref HAL_TIM_IC_MSPINIT_CB_ID IC MspInit Callback ID + * @arg @ref HAL_TIM_IC_MSPDEINIT_CB_ID IC MspDeInit Callback ID + * @arg @ref HAL_TIM_OC_MSPINIT_CB_ID OC MspInit Callback ID + * @arg @ref HAL_TIM_OC_MSPDEINIT_CB_ID OC MspDeInit Callback ID + * @arg @ref HAL_TIM_PWM_MSPINIT_CB_ID PWM MspInit Callback ID + * @arg @ref HAL_TIM_PWM_MSPDEINIT_CB_ID PWM MspDeInit Callback ID + * @arg @ref HAL_TIM_ONE_PULSE_MSPINIT_CB_ID One Pulse MspInit Callback ID + * @arg @ref HAL_TIM_ONE_PULSE_MSPDEINIT_CB_ID One Pulse MspDeInit Callback ID + * @arg @ref HAL_TIM_ENCODER_MSPINIT_CB_ID Encoder MspInit Callback ID + * @arg @ref HAL_TIM_ENCODER_MSPDEINIT_CB_ID Encoder MspDeInit Callback ID + * @arg @ref HAL_TIM_HALL_SENSOR_MSPINIT_CB_ID Hall Sensor MspInit Callback ID + * @arg @ref HAL_TIM_HALL_SENSOR_MSPDEINIT_CB_ID Hall Sensor MspDeInit Callback ID + * @arg @ref HAL_TIM_PERIOD_ELAPSED_CB_ID Period Elapsed Callback ID + * @arg @ref HAL_TIM_PERIOD_ELAPSED_HALF_CB_ID Period Elapsed half complete Callback ID + * @arg @ref HAL_TIM_TRIGGER_CB_ID Trigger Callback ID + * @arg @ref HAL_TIM_TRIGGER_HALF_CB_ID Trigger half complete Callback ID + * @arg @ref HAL_TIM_IC_CAPTURE_CB_ID Input Capture Callback ID + * @arg @ref HAL_TIM_IC_CAPTURE_HALF_CB_ID Input Capture half complete Callback ID + * @arg @ref HAL_TIM_OC_DELAY_ELAPSED_CB_ID Output Compare Delay Elapsed Callback ID + * @arg @ref HAL_TIM_PWM_PULSE_FINISHED_CB_ID PWM Pulse Finished Callback ID + * @arg @ref HAL_TIM_PWM_PULSE_FINISHED_HALF_CB_ID PWM Pulse Finished half complete Callback ID + * @arg @ref HAL_TIM_ERROR_CB_ID Error Callback ID + * @arg @ref HAL_TIM_COMMUTATION_CB_ID Commutation Callback ID + * @arg @ref HAL_TIM_COMMUTATION_HALF_CB_ID Commutation half complete Callback ID + * @arg @ref HAL_TIM_BREAK_CB_ID Break Callback ID + * @arg @ref HAL_TIM_BREAK2_CB_ID Break2 Callback ID + * @param pCallback pointer to the callback function + * @retval status + */ +HAL_StatusTypeDef HAL_TIM_RegisterCallback(TIM_HandleTypeDef *htim, HAL_TIM_CallbackIDTypeDef CallbackID, + pTIM_CallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + return HAL_ERROR; + } + + if (htim->State == HAL_TIM_STATE_READY) + { + switch (CallbackID) + { + case HAL_TIM_BASE_MSPINIT_CB_ID : + htim->Base_MspInitCallback = pCallback; + break; + + case HAL_TIM_BASE_MSPDEINIT_CB_ID : + htim->Base_MspDeInitCallback = pCallback; + break; + + case HAL_TIM_IC_MSPINIT_CB_ID : + htim->IC_MspInitCallback = pCallback; + break; + + case HAL_TIM_IC_MSPDEINIT_CB_ID : + htim->IC_MspDeInitCallback = pCallback; + break; + + case HAL_TIM_OC_MSPINIT_CB_ID : + htim->OC_MspInitCallback = pCallback; + break; + + case HAL_TIM_OC_MSPDEINIT_CB_ID : + htim->OC_MspDeInitCallback = pCallback; + break; + + case HAL_TIM_PWM_MSPINIT_CB_ID : + htim->PWM_MspInitCallback = pCallback; + break; + + case HAL_TIM_PWM_MSPDEINIT_CB_ID : + htim->PWM_MspDeInitCallback = pCallback; + break; + + case HAL_TIM_ONE_PULSE_MSPINIT_CB_ID : + htim->OnePulse_MspInitCallback = pCallback; + break; + + case HAL_TIM_ONE_PULSE_MSPDEINIT_CB_ID : + htim->OnePulse_MspDeInitCallback = pCallback; + break; + + case HAL_TIM_ENCODER_MSPINIT_CB_ID : + htim->Encoder_MspInitCallback = pCallback; + break; + + case HAL_TIM_ENCODER_MSPDEINIT_CB_ID : + htim->Encoder_MspDeInitCallback = pCallback; + break; + + case HAL_TIM_HALL_SENSOR_MSPINIT_CB_ID : + htim->HallSensor_MspInitCallback = pCallback; + break; + + case HAL_TIM_HALL_SENSOR_MSPDEINIT_CB_ID : + htim->HallSensor_MspDeInitCallback = pCallback; + break; + + case HAL_TIM_PERIOD_ELAPSED_CB_ID : + htim->PeriodElapsedCallback = pCallback; + break; + + case HAL_TIM_PERIOD_ELAPSED_HALF_CB_ID : + htim->PeriodElapsedHalfCpltCallback = pCallback; + break; + + case HAL_TIM_TRIGGER_CB_ID : + htim->TriggerCallback = pCallback; + break; + + case HAL_TIM_TRIGGER_HALF_CB_ID : + htim->TriggerHalfCpltCallback = pCallback; + break; + + case HAL_TIM_IC_CAPTURE_CB_ID : + htim->IC_CaptureCallback = pCallback; + break; + + case HAL_TIM_IC_CAPTURE_HALF_CB_ID : + htim->IC_CaptureHalfCpltCallback = pCallback; + break; + + case HAL_TIM_OC_DELAY_ELAPSED_CB_ID : + htim->OC_DelayElapsedCallback = pCallback; + break; + + case HAL_TIM_PWM_PULSE_FINISHED_CB_ID : + htim->PWM_PulseFinishedCallback = pCallback; + break; + + case HAL_TIM_PWM_PULSE_FINISHED_HALF_CB_ID : + htim->PWM_PulseFinishedHalfCpltCallback = pCallback; + break; + + case HAL_TIM_ERROR_CB_ID : + htim->ErrorCallback = pCallback; + break; + + case HAL_TIM_COMMUTATION_CB_ID : + htim->CommutationCallback = pCallback; + break; + + case HAL_TIM_COMMUTATION_HALF_CB_ID : + htim->CommutationHalfCpltCallback = pCallback; + break; + + case HAL_TIM_BREAK_CB_ID : + htim->BreakCallback = pCallback; + break; + + case HAL_TIM_BREAK2_CB_ID : + htim->Break2Callback = pCallback; + break; + + default : + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (htim->State == HAL_TIM_STATE_RESET) + { + switch (CallbackID) + { + case HAL_TIM_BASE_MSPINIT_CB_ID : + htim->Base_MspInitCallback = pCallback; + break; + + case HAL_TIM_BASE_MSPDEINIT_CB_ID : + htim->Base_MspDeInitCallback = pCallback; + break; + + case HAL_TIM_IC_MSPINIT_CB_ID : + htim->IC_MspInitCallback = pCallback; + break; + + case HAL_TIM_IC_MSPDEINIT_CB_ID : + htim->IC_MspDeInitCallback = pCallback; + break; + + case HAL_TIM_OC_MSPINIT_CB_ID : + htim->OC_MspInitCallback = pCallback; + break; + + case HAL_TIM_OC_MSPDEINIT_CB_ID : + htim->OC_MspDeInitCallback = pCallback; + break; + + case HAL_TIM_PWM_MSPINIT_CB_ID : + htim->PWM_MspInitCallback = pCallback; + break; + + case HAL_TIM_PWM_MSPDEINIT_CB_ID : + htim->PWM_MspDeInitCallback = pCallback; + break; + + case HAL_TIM_ONE_PULSE_MSPINIT_CB_ID : + htim->OnePulse_MspInitCallback = pCallback; + break; + + case HAL_TIM_ONE_PULSE_MSPDEINIT_CB_ID : + htim->OnePulse_MspDeInitCallback = pCallback; + break; + + case HAL_TIM_ENCODER_MSPINIT_CB_ID : + htim->Encoder_MspInitCallback = pCallback; + break; + + case HAL_TIM_ENCODER_MSPDEINIT_CB_ID : + htim->Encoder_MspDeInitCallback = pCallback; + break; + + case HAL_TIM_HALL_SENSOR_MSPINIT_CB_ID : + htim->HallSensor_MspInitCallback = pCallback; + break; + + case HAL_TIM_HALL_SENSOR_MSPDEINIT_CB_ID : + htim->HallSensor_MspDeInitCallback = pCallback; + break; + + default : + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Return error status */ + status = HAL_ERROR; + } + + return status; +} + +/** + * @brief Unregister a TIM callback + * TIM callback is redirected to the weak predefined callback + * @param htim tim handle + * @param CallbackID ID of the callback to be unregistered + * This parameter can be one of the following values: + * @arg @ref HAL_TIM_BASE_MSPINIT_CB_ID Base MspInit Callback ID + * @arg @ref HAL_TIM_BASE_MSPDEINIT_CB_ID Base MspDeInit Callback ID + * @arg @ref HAL_TIM_IC_MSPINIT_CB_ID IC MspInit Callback ID + * @arg @ref HAL_TIM_IC_MSPDEINIT_CB_ID IC MspDeInit Callback ID + * @arg @ref HAL_TIM_OC_MSPINIT_CB_ID OC MspInit Callback ID + * @arg @ref HAL_TIM_OC_MSPDEINIT_CB_ID OC MspDeInit Callback ID + * @arg @ref HAL_TIM_PWM_MSPINIT_CB_ID PWM MspInit Callback ID + * @arg @ref HAL_TIM_PWM_MSPDEINIT_CB_ID PWM MspDeInit Callback ID + * @arg @ref HAL_TIM_ONE_PULSE_MSPINIT_CB_ID One Pulse MspInit Callback ID + * @arg @ref HAL_TIM_ONE_PULSE_MSPDEINIT_CB_ID One Pulse MspDeInit Callback ID + * @arg @ref HAL_TIM_ENCODER_MSPINIT_CB_ID Encoder MspInit Callback ID + * @arg @ref HAL_TIM_ENCODER_MSPDEINIT_CB_ID Encoder MspDeInit Callback ID + * @arg @ref HAL_TIM_HALL_SENSOR_MSPINIT_CB_ID Hall Sensor MspInit Callback ID + * @arg @ref HAL_TIM_HALL_SENSOR_MSPDEINIT_CB_ID Hall Sensor MspDeInit Callback ID + * @arg @ref HAL_TIM_PERIOD_ELAPSED_CB_ID Period Elapsed Callback ID + * @arg @ref HAL_TIM_PERIOD_ELAPSED_HALF_CB_ID Period Elapsed half complete Callback ID + * @arg @ref HAL_TIM_TRIGGER_CB_ID Trigger Callback ID + * @arg @ref HAL_TIM_TRIGGER_HALF_CB_ID Trigger half complete Callback ID + * @arg @ref HAL_TIM_IC_CAPTURE_CB_ID Input Capture Callback ID + * @arg @ref HAL_TIM_IC_CAPTURE_HALF_CB_ID Input Capture half complete Callback ID + * @arg @ref HAL_TIM_OC_DELAY_ELAPSED_CB_ID Output Compare Delay Elapsed Callback ID + * @arg @ref HAL_TIM_PWM_PULSE_FINISHED_CB_ID PWM Pulse Finished Callback ID + * @arg @ref HAL_TIM_PWM_PULSE_FINISHED_HALF_CB_ID PWM Pulse Finished half complete Callback ID + * @arg @ref HAL_TIM_ERROR_CB_ID Error Callback ID + * @arg @ref HAL_TIM_COMMUTATION_CB_ID Commutation Callback ID + * @arg @ref HAL_TIM_COMMUTATION_HALF_CB_ID Commutation half complete Callback ID + * @arg @ref HAL_TIM_BREAK_CB_ID Break Callback ID + * @arg @ref HAL_TIM_BREAK2_CB_ID Break2 Callback ID + * @retval status + */ +HAL_StatusTypeDef HAL_TIM_UnRegisterCallback(TIM_HandleTypeDef *htim, HAL_TIM_CallbackIDTypeDef CallbackID) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (htim->State == HAL_TIM_STATE_READY) + { + switch (CallbackID) + { + case HAL_TIM_BASE_MSPINIT_CB_ID : + /* Legacy weak Base MspInit Callback */ + htim->Base_MspInitCallback = HAL_TIM_Base_MspInit; + break; + + case HAL_TIM_BASE_MSPDEINIT_CB_ID : + /* Legacy weak Base Msp DeInit Callback */ + htim->Base_MspDeInitCallback = HAL_TIM_Base_MspDeInit; + break; + + case HAL_TIM_IC_MSPINIT_CB_ID : + /* Legacy weak IC Msp Init Callback */ + htim->IC_MspInitCallback = HAL_TIM_IC_MspInit; + break; + + case HAL_TIM_IC_MSPDEINIT_CB_ID : + /* Legacy weak IC Msp DeInit Callback */ + htim->IC_MspDeInitCallback = HAL_TIM_IC_MspDeInit; + break; + + case HAL_TIM_OC_MSPINIT_CB_ID : + /* Legacy weak OC Msp Init Callback */ + htim->OC_MspInitCallback = HAL_TIM_OC_MspInit; + break; + + case HAL_TIM_OC_MSPDEINIT_CB_ID : + /* Legacy weak OC Msp DeInit Callback */ + htim->OC_MspDeInitCallback = HAL_TIM_OC_MspDeInit; + break; + + case HAL_TIM_PWM_MSPINIT_CB_ID : + /* Legacy weak PWM Msp Init Callback */ + htim->PWM_MspInitCallback = HAL_TIM_PWM_MspInit; + break; + + case HAL_TIM_PWM_MSPDEINIT_CB_ID : + /* Legacy weak PWM Msp DeInit Callback */ + htim->PWM_MspDeInitCallback = HAL_TIM_PWM_MspDeInit; + break; + + case HAL_TIM_ONE_PULSE_MSPINIT_CB_ID : + /* Legacy weak One Pulse Msp Init Callback */ + htim->OnePulse_MspInitCallback = HAL_TIM_OnePulse_MspInit; + break; + + case HAL_TIM_ONE_PULSE_MSPDEINIT_CB_ID : + /* Legacy weak One Pulse Msp DeInit Callback */ + htim->OnePulse_MspDeInitCallback = HAL_TIM_OnePulse_MspDeInit; + break; + + case HAL_TIM_ENCODER_MSPINIT_CB_ID : + /* Legacy weak Encoder Msp Init Callback */ + htim->Encoder_MspInitCallback = HAL_TIM_Encoder_MspInit; + break; + + case HAL_TIM_ENCODER_MSPDEINIT_CB_ID : + /* Legacy weak Encoder Msp DeInit Callback */ + htim->Encoder_MspDeInitCallback = HAL_TIM_Encoder_MspDeInit; + break; + + case HAL_TIM_HALL_SENSOR_MSPINIT_CB_ID : + /* Legacy weak Hall Sensor Msp Init Callback */ + htim->HallSensor_MspInitCallback = HAL_TIMEx_HallSensor_MspInit; + break; + + case HAL_TIM_HALL_SENSOR_MSPDEINIT_CB_ID : + /* Legacy weak Hall Sensor Msp DeInit Callback */ + htim->HallSensor_MspDeInitCallback = HAL_TIMEx_HallSensor_MspDeInit; + break; + + case HAL_TIM_PERIOD_ELAPSED_CB_ID : + /* Legacy weak Period Elapsed Callback */ + htim->PeriodElapsedCallback = HAL_TIM_PeriodElapsedCallback; + break; + + case HAL_TIM_PERIOD_ELAPSED_HALF_CB_ID : + /* Legacy weak Period Elapsed half complete Callback */ + htim->PeriodElapsedHalfCpltCallback = HAL_TIM_PeriodElapsedHalfCpltCallback; + break; + + case HAL_TIM_TRIGGER_CB_ID : + /* Legacy weak Trigger Callback */ + htim->TriggerCallback = HAL_TIM_TriggerCallback; + break; + + case HAL_TIM_TRIGGER_HALF_CB_ID : + /* Legacy weak Trigger half complete Callback */ + htim->TriggerHalfCpltCallback = HAL_TIM_TriggerHalfCpltCallback; + break; + + case HAL_TIM_IC_CAPTURE_CB_ID : + /* Legacy weak IC Capture Callback */ + htim->IC_CaptureCallback = HAL_TIM_IC_CaptureCallback; + break; + + case HAL_TIM_IC_CAPTURE_HALF_CB_ID : + /* Legacy weak IC Capture half complete Callback */ + htim->IC_CaptureHalfCpltCallback = HAL_TIM_IC_CaptureHalfCpltCallback; + break; + + case HAL_TIM_OC_DELAY_ELAPSED_CB_ID : + /* Legacy weak OC Delay Elapsed Callback */ + htim->OC_DelayElapsedCallback = HAL_TIM_OC_DelayElapsedCallback; + break; + + case HAL_TIM_PWM_PULSE_FINISHED_CB_ID : + /* Legacy weak PWM Pulse Finished Callback */ + htim->PWM_PulseFinishedCallback = HAL_TIM_PWM_PulseFinishedCallback; + break; + + case HAL_TIM_PWM_PULSE_FINISHED_HALF_CB_ID : + /* Legacy weak PWM Pulse Finished half complete Callback */ + htim->PWM_PulseFinishedHalfCpltCallback = HAL_TIM_PWM_PulseFinishedHalfCpltCallback; + break; + + case HAL_TIM_ERROR_CB_ID : + /* Legacy weak Error Callback */ + htim->ErrorCallback = HAL_TIM_ErrorCallback; + break; + + case HAL_TIM_COMMUTATION_CB_ID : + /* Legacy weak Commutation Callback */ + htim->CommutationCallback = HAL_TIMEx_CommutCallback; + break; + + case HAL_TIM_COMMUTATION_HALF_CB_ID : + /* Legacy weak Commutation half complete Callback */ + htim->CommutationHalfCpltCallback = HAL_TIMEx_CommutHalfCpltCallback; + break; + + case HAL_TIM_BREAK_CB_ID : + /* Legacy weak Break Callback */ + htim->BreakCallback = HAL_TIMEx_BreakCallback; + break; + + case HAL_TIM_BREAK2_CB_ID : + /* Legacy weak Break2 Callback */ + htim->Break2Callback = HAL_TIMEx_Break2Callback; + break; + + default : + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (htim->State == HAL_TIM_STATE_RESET) + { + switch (CallbackID) + { + case HAL_TIM_BASE_MSPINIT_CB_ID : + /* Legacy weak Base MspInit Callback */ + htim->Base_MspInitCallback = HAL_TIM_Base_MspInit; + break; + + case HAL_TIM_BASE_MSPDEINIT_CB_ID : + /* Legacy weak Base Msp DeInit Callback */ + htim->Base_MspDeInitCallback = HAL_TIM_Base_MspDeInit; + break; + + case HAL_TIM_IC_MSPINIT_CB_ID : + /* Legacy weak IC Msp Init Callback */ + htim->IC_MspInitCallback = HAL_TIM_IC_MspInit; + break; + + case HAL_TIM_IC_MSPDEINIT_CB_ID : + /* Legacy weak IC Msp DeInit Callback */ + htim->IC_MspDeInitCallback = HAL_TIM_IC_MspDeInit; + break; + + case HAL_TIM_OC_MSPINIT_CB_ID : + /* Legacy weak OC Msp Init Callback */ + htim->OC_MspInitCallback = HAL_TIM_OC_MspInit; + break; + + case HAL_TIM_OC_MSPDEINIT_CB_ID : + /* Legacy weak OC Msp DeInit Callback */ + htim->OC_MspDeInitCallback = HAL_TIM_OC_MspDeInit; + break; + + case HAL_TIM_PWM_MSPINIT_CB_ID : + /* Legacy weak PWM Msp Init Callback */ + htim->PWM_MspInitCallback = HAL_TIM_PWM_MspInit; + break; + + case HAL_TIM_PWM_MSPDEINIT_CB_ID : + /* Legacy weak PWM Msp DeInit Callback */ + htim->PWM_MspDeInitCallback = HAL_TIM_PWM_MspDeInit; + break; + + case HAL_TIM_ONE_PULSE_MSPINIT_CB_ID : + /* Legacy weak One Pulse Msp Init Callback */ + htim->OnePulse_MspInitCallback = HAL_TIM_OnePulse_MspInit; + break; + + case HAL_TIM_ONE_PULSE_MSPDEINIT_CB_ID : + /* Legacy weak One Pulse Msp DeInit Callback */ + htim->OnePulse_MspDeInitCallback = HAL_TIM_OnePulse_MspDeInit; + break; + + case HAL_TIM_ENCODER_MSPINIT_CB_ID : + /* Legacy weak Encoder Msp Init Callback */ + htim->Encoder_MspInitCallback = HAL_TIM_Encoder_MspInit; + break; + + case HAL_TIM_ENCODER_MSPDEINIT_CB_ID : + /* Legacy weak Encoder Msp DeInit Callback */ + htim->Encoder_MspDeInitCallback = HAL_TIM_Encoder_MspDeInit; + break; + + case HAL_TIM_HALL_SENSOR_MSPINIT_CB_ID : + /* Legacy weak Hall Sensor Msp Init Callback */ + htim->HallSensor_MspInitCallback = HAL_TIMEx_HallSensor_MspInit; + break; + + case HAL_TIM_HALL_SENSOR_MSPDEINIT_CB_ID : + /* Legacy weak Hall Sensor Msp DeInit Callback */ + htim->HallSensor_MspDeInitCallback = HAL_TIMEx_HallSensor_MspDeInit; + break; + + default : + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Return error status */ + status = HAL_ERROR; + } + + return status; +} +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** @defgroup TIM_Exported_Functions_Group10 TIM Peripheral State functions + * @brief TIM Peripheral State functions + * +@verbatim + ============================================================================== + ##### Peripheral State functions ##### + ============================================================================== + [..] + This subsection permits to get in run-time the status of the peripheral + and the data flow. + +@endverbatim + * @{ + */ + +/** + * @brief Return the TIM Base handle state. + * @param htim TIM Base handle + * @retval HAL state + */ +HAL_TIM_StateTypeDef HAL_TIM_Base_GetState(const TIM_HandleTypeDef *htim) +{ + return htim->State; +} + +/** + * @brief Return the TIM OC handle state. + * @param htim TIM Output Compare handle + * @retval HAL state + */ +HAL_TIM_StateTypeDef HAL_TIM_OC_GetState(const TIM_HandleTypeDef *htim) +{ + return htim->State; +} + +/** + * @brief Return the TIM PWM handle state. + * @param htim TIM handle + * @retval HAL state + */ +HAL_TIM_StateTypeDef HAL_TIM_PWM_GetState(const TIM_HandleTypeDef *htim) +{ + return htim->State; +} + +/** + * @brief Return the TIM Input Capture handle state. + * @param htim TIM IC handle + * @retval HAL state + */ +HAL_TIM_StateTypeDef HAL_TIM_IC_GetState(const TIM_HandleTypeDef *htim) +{ + return htim->State; +} + +/** + * @brief Return the TIM One Pulse Mode handle state. + * @param htim TIM OPM handle + * @retval HAL state + */ +HAL_TIM_StateTypeDef HAL_TIM_OnePulse_GetState(const TIM_HandleTypeDef *htim) +{ + return htim->State; +} + +/** + * @brief Return the TIM Encoder Mode handle state. + * @param htim TIM Encoder Interface handle + * @retval HAL state + */ +HAL_TIM_StateTypeDef HAL_TIM_Encoder_GetState(const TIM_HandleTypeDef *htim) +{ + return htim->State; +} + +/** + * @brief Return the TIM Encoder Mode handle state. + * @param htim TIM handle + * @retval Active channel + */ +HAL_TIM_ActiveChannel HAL_TIM_GetActiveChannel(const TIM_HandleTypeDef *htim) +{ + return htim->Channel; +} + +/** + * @brief Return actual state of the TIM channel. + * @param htim TIM handle + * @param Channel TIM Channel + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 + * @arg TIM_CHANNEL_2: TIM Channel 2 + * @arg TIM_CHANNEL_3: TIM Channel 3 + * @arg TIM_CHANNEL_4: TIM Channel 4 + * @arg TIM_CHANNEL_5: TIM Channel 5 + * @arg TIM_CHANNEL_6: TIM Channel 6 + * @retval TIM Channel state + */ +HAL_TIM_ChannelStateTypeDef HAL_TIM_GetChannelState(const TIM_HandleTypeDef *htim, uint32_t Channel) +{ + HAL_TIM_ChannelStateTypeDef channel_state; + + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + channel_state = TIM_CHANNEL_STATE_GET(htim, Channel); + + return channel_state; +} + +/** + * @brief Return actual state of a DMA burst operation. + * @param htim TIM handle + * @retval DMA burst state + */ +HAL_TIM_DMABurstStateTypeDef HAL_TIM_DMABurstState(const TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_DMABURST_INSTANCE(htim->Instance)); + + return htim->DMABurstState; +} + +/** + * @} + */ + +/** + * @} + */ + +/** @defgroup TIM_Private_Functions TIM Private Functions + * @{ + */ + +/** + * @brief TIM DMA error callback + * @param hdma pointer to DMA handle. + * @retval None + */ +void TIM_DMAError(DMA_HandleTypeDef *hdma) +{ + TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + if (hdma == htim->hdma[TIM_DMA_ID_CC1]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1; + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC2]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2; + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC3]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3; + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_3, HAL_TIM_CHANNEL_STATE_READY); + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC4]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4; + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_4, HAL_TIM_CHANNEL_STATE_READY); + } + else + { + htim->State = HAL_TIM_STATE_READY; + } + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->ErrorCallback(htim); +#else + HAL_TIM_ErrorCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; +} + +/** + * @brief TIM DMA Delay Pulse complete callback. + * @param hdma pointer to DMA handle. + * @retval None + */ +static void TIM_DMADelayPulseCplt(DMA_HandleTypeDef *hdma) +{ + TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + if (hdma == htim->hdma[TIM_DMA_ID_CC1]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1; + + if (hdma->Init.Mode == DMA_NORMAL) + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + } + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC2]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2; + + if (hdma->Init.Mode == DMA_NORMAL) + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + } + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC3]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3; + + if (hdma->Init.Mode == DMA_NORMAL) + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_3, HAL_TIM_CHANNEL_STATE_READY); + } + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC4]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4; + + if (hdma->Init.Mode == DMA_NORMAL) + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_4, HAL_TIM_CHANNEL_STATE_READY); + } + } + else + { + /* nothing to do */ + } + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->PWM_PulseFinishedCallback(htim); +#else + HAL_TIM_PWM_PulseFinishedCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; +} + +/** + * @brief TIM DMA Delay Pulse half complete callback. + * @param hdma pointer to DMA handle. + * @retval None + */ +void TIM_DMADelayPulseHalfCplt(DMA_HandleTypeDef *hdma) +{ + TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + if (hdma == htim->hdma[TIM_DMA_ID_CC1]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1; + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC2]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2; + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC3]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3; + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC4]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4; + } + else + { + /* nothing to do */ + } + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->PWM_PulseFinishedHalfCpltCallback(htim); +#else + HAL_TIM_PWM_PulseFinishedHalfCpltCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; +} + +/** + * @brief TIM DMA Capture complete callback. + * @param hdma pointer to DMA handle. + * @retval None + */ +void TIM_DMACaptureCplt(DMA_HandleTypeDef *hdma) +{ + TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + if (hdma == htim->hdma[TIM_DMA_ID_CC1]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1; + + if (hdma->Init.Mode == DMA_NORMAL) + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + } + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC2]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2; + + if (hdma->Init.Mode == DMA_NORMAL) + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + } + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC3]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3; + + if (hdma->Init.Mode == DMA_NORMAL) + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_3, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_3, HAL_TIM_CHANNEL_STATE_READY); + } + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC4]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4; + + if (hdma->Init.Mode == DMA_NORMAL) + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_4, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_4, HAL_TIM_CHANNEL_STATE_READY); + } + } + else + { + /* nothing to do */ + } + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->IC_CaptureCallback(htim); +#else + HAL_TIM_IC_CaptureCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; +} + +/** + * @brief TIM DMA Capture half complete callback. + * @param hdma pointer to DMA handle. + * @retval None + */ +void TIM_DMACaptureHalfCplt(DMA_HandleTypeDef *hdma) +{ + TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + if (hdma == htim->hdma[TIM_DMA_ID_CC1]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1; + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC2]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2; + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC3]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3; + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC4]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4; + } + else + { + /* nothing to do */ + } + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->IC_CaptureHalfCpltCallback(htim); +#else + HAL_TIM_IC_CaptureHalfCpltCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; +} + +/** + * @brief TIM DMA Period Elapse complete callback. + * @param hdma pointer to DMA handle. + * @retval None + */ +static void TIM_DMAPeriodElapsedCplt(DMA_HandleTypeDef *hdma) +{ + TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + if (htim->hdma[TIM_DMA_ID_UPDATE]->Init.Mode == DMA_NORMAL) + { + htim->State = HAL_TIM_STATE_READY; + } + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->PeriodElapsedCallback(htim); +#else + HAL_TIM_PeriodElapsedCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ +} + +/** + * @brief TIM DMA Period Elapse half complete callback. + * @param hdma pointer to DMA handle. + * @retval None + */ +static void TIM_DMAPeriodElapsedHalfCplt(DMA_HandleTypeDef *hdma) +{ + TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->PeriodElapsedHalfCpltCallback(htim); +#else + HAL_TIM_PeriodElapsedHalfCpltCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ +} + +/** + * @brief TIM DMA Trigger callback. + * @param hdma pointer to DMA handle. + * @retval None + */ +static void TIM_DMATriggerCplt(DMA_HandleTypeDef *hdma) +{ + TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + if (htim->hdma[TIM_DMA_ID_TRIGGER]->Init.Mode == DMA_NORMAL) + { + htim->State = HAL_TIM_STATE_READY; + } + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->TriggerCallback(htim); +#else + HAL_TIM_TriggerCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ +} + +/** + * @brief TIM DMA Trigger half complete callback. + * @param hdma pointer to DMA handle. + * @retval None + */ +static void TIM_DMATriggerHalfCplt(DMA_HandleTypeDef *hdma) +{ + TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->TriggerHalfCpltCallback(htim); +#else + HAL_TIM_TriggerHalfCpltCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ +} + +/** + * @brief Time Base configuration + * @param TIMx TIM peripheral + * @param Structure TIM Base configuration structure + * @retval None + */ +void TIM_Base_SetConfig(TIM_TypeDef *TIMx, const TIM_Base_InitTypeDef *Structure) +{ + uint32_t tmpcr1; + tmpcr1 = TIMx->CR1; + + /* Set TIM Time Base Unit parameters ---------------------------------------*/ + if (IS_TIM_COUNTER_MODE_SELECT_INSTANCE(TIMx)) + { + /* Select the Counter Mode */ + tmpcr1 &= ~(TIM_CR1_DIR | TIM_CR1_CMS); + tmpcr1 |= Structure->CounterMode; + } + + if (IS_TIM_CLOCK_DIVISION_INSTANCE(TIMx)) + { + /* Set the clock division */ + tmpcr1 &= ~TIM_CR1_CKD; + tmpcr1 |= (uint32_t)Structure->ClockDivision; + } + + /* Set the auto-reload preload */ + MODIFY_REG(tmpcr1, TIM_CR1_ARPE, Structure->AutoReloadPreload); + + TIMx->CR1 = tmpcr1; + + /* Set the Autoreload value */ + TIMx->ARR = (uint32_t)Structure->Period ; + + /* Set the Prescaler value */ + TIMx->PSC = Structure->Prescaler; + + if (IS_TIM_REPETITION_COUNTER_INSTANCE(TIMx)) + { + /* Set the Repetition Counter value */ + TIMx->RCR = Structure->RepetitionCounter; + } + + /* Generate an update event to reload the Prescaler + and the repetition counter (only for advanced timer) value immediately */ + TIMx->EGR = TIM_EGR_UG; + + /* Check if the update flag is set after the Update Generation, if so clear the UIF flag */ + if (HAL_IS_BIT_SET(TIMx->SR, TIM_FLAG_UPDATE)) + { + /* Clear the update flag */ + CLEAR_BIT(TIMx->SR, TIM_FLAG_UPDATE); + } +} + +/** + * @brief Timer Output Compare 1 configuration + * @param TIMx to select the TIM peripheral + * @param OC_Config The output configuration structure + * @retval None + */ +static void TIM_OC1_SetConfig(TIM_TypeDef *TIMx, const TIM_OC_InitTypeDef *OC_Config) +{ + uint32_t tmpccmrx; + uint32_t tmpccer; + uint32_t tmpcr2; + + /* Get the TIMx CCER register value */ + tmpccer = TIMx->CCER; + + /* Disable the Channel 1: Reset the CC1E Bit */ + TIMx->CCER &= ~TIM_CCER_CC1E; + + /* Get the TIMx CR2 register value */ + tmpcr2 = TIMx->CR2; + + /* Get the TIMx CCMR1 register value */ + tmpccmrx = TIMx->CCMR1; + + /* Reset the Output Compare Mode Bits */ + tmpccmrx &= ~TIM_CCMR1_OC1M; + tmpccmrx &= ~TIM_CCMR1_CC1S; + /* Select the Output Compare Mode */ + tmpccmrx |= OC_Config->OCMode; + + /* Reset the Output Polarity level */ + tmpccer &= ~TIM_CCER_CC1P; + /* Set the Output Compare Polarity */ + tmpccer |= OC_Config->OCPolarity; + + if (IS_TIM_CCXN_INSTANCE(TIMx, TIM_CHANNEL_1)) + { + /* Check parameters */ + assert_param(IS_TIM_OCN_POLARITY(OC_Config->OCNPolarity)); + + /* Reset the Output N Polarity level */ + tmpccer &= ~TIM_CCER_CC1NP; + /* Set the Output N Polarity */ + tmpccer |= OC_Config->OCNPolarity; + /* Reset the Output N State */ + tmpccer &= ~TIM_CCER_CC1NE; + } + + if (IS_TIM_BREAK_INSTANCE(TIMx)) + { + /* Check parameters */ + assert_param(IS_TIM_OCNIDLE_STATE(OC_Config->OCNIdleState)); + assert_param(IS_TIM_OCIDLE_STATE(OC_Config->OCIdleState)); + + /* Reset the Output Compare and Output Compare N IDLE State */ + tmpcr2 &= ~TIM_CR2_OIS1; + tmpcr2 &= ~TIM_CR2_OIS1N; + /* Set the Output Idle state */ + tmpcr2 |= OC_Config->OCIdleState; + /* Set the Output N Idle state */ + tmpcr2 |= OC_Config->OCNIdleState; + } + + /* Write to TIMx CR2 */ + TIMx->CR2 = tmpcr2; + + /* Write to TIMx CCMR1 */ + TIMx->CCMR1 = tmpccmrx; + + /* Set the Capture Compare Register value */ + TIMx->CCR1 = OC_Config->Pulse; + + /* Write to TIMx CCER */ + TIMx->CCER = tmpccer; +} + +/** + * @brief Timer Output Compare 2 configuration + * @param TIMx to select the TIM peripheral + * @param OC_Config The output configuration structure + * @retval None + */ +void TIM_OC2_SetConfig(TIM_TypeDef *TIMx, const TIM_OC_InitTypeDef *OC_Config) +{ + uint32_t tmpccmrx; + uint32_t tmpccer; + uint32_t tmpcr2; + + /* Get the TIMx CCER register value */ + tmpccer = TIMx->CCER; + + /* Disable the Channel 2: Reset the CC2E Bit */ + TIMx->CCER &= ~TIM_CCER_CC2E; + + /* Get the TIMx CR2 register value */ + tmpcr2 = TIMx->CR2; + + /* Get the TIMx CCMR1 register value */ + tmpccmrx = TIMx->CCMR1; + + /* Reset the Output Compare mode and Capture/Compare selection Bits */ + tmpccmrx &= ~TIM_CCMR1_OC2M; + tmpccmrx &= ~TIM_CCMR1_CC2S; + + /* Select the Output Compare Mode */ + tmpccmrx |= (OC_Config->OCMode << 8U); + + /* Reset the Output Polarity level */ + tmpccer &= ~TIM_CCER_CC2P; + /* Set the Output Compare Polarity */ + tmpccer |= (OC_Config->OCPolarity << 4U); + + if (IS_TIM_CCXN_INSTANCE(TIMx, TIM_CHANNEL_2)) + { + assert_param(IS_TIM_OCN_POLARITY(OC_Config->OCNPolarity)); + + /* Reset the Output N Polarity level */ + tmpccer &= ~TIM_CCER_CC2NP; + /* Set the Output N Polarity */ + tmpccer |= (OC_Config->OCNPolarity << 4U); + /* Reset the Output N State */ + tmpccer &= ~TIM_CCER_CC2NE; + } + + if (IS_TIM_BREAK_INSTANCE(TIMx)) + { + /* Check parameters */ + assert_param(IS_TIM_OCNIDLE_STATE(OC_Config->OCNIdleState)); + assert_param(IS_TIM_OCIDLE_STATE(OC_Config->OCIdleState)); + + /* Reset the Output Compare and Output Compare N IDLE State */ + tmpcr2 &= ~TIM_CR2_OIS2; + tmpcr2 &= ~TIM_CR2_OIS2N; + /* Set the Output Idle state */ + tmpcr2 |= (OC_Config->OCIdleState << 2U); + /* Set the Output N Idle state */ + tmpcr2 |= (OC_Config->OCNIdleState << 2U); + } + + /* Write to TIMx CR2 */ + TIMx->CR2 = tmpcr2; + + /* Write to TIMx CCMR1 */ + TIMx->CCMR1 = tmpccmrx; + + /* Set the Capture Compare Register value */ + TIMx->CCR2 = OC_Config->Pulse; + + /* Write to TIMx CCER */ + TIMx->CCER = tmpccer; +} + +/** + * @brief Timer Output Compare 3 configuration + * @param TIMx to select the TIM peripheral + * @param OC_Config The output configuration structure + * @retval None + */ +static void TIM_OC3_SetConfig(TIM_TypeDef *TIMx, const TIM_OC_InitTypeDef *OC_Config) +{ + uint32_t tmpccmrx; + uint32_t tmpccer; + uint32_t tmpcr2; + + /* Get the TIMx CCER register value */ + tmpccer = TIMx->CCER; + + /* Disable the Channel 3: Reset the CC2E Bit */ + TIMx->CCER &= ~TIM_CCER_CC3E; + + /* Get the TIMx CR2 register value */ + tmpcr2 = TIMx->CR2; + + /* Get the TIMx CCMR2 register value */ + tmpccmrx = TIMx->CCMR2; + + /* Reset the Output Compare mode and Capture/Compare selection Bits */ + tmpccmrx &= ~TIM_CCMR2_OC3M; + tmpccmrx &= ~TIM_CCMR2_CC3S; + /* Select the Output Compare Mode */ + tmpccmrx |= OC_Config->OCMode; + + /* Reset the Output Polarity level */ + tmpccer &= ~TIM_CCER_CC3P; + /* Set the Output Compare Polarity */ + tmpccer |= (OC_Config->OCPolarity << 8U); + + if (IS_TIM_CCXN_INSTANCE(TIMx, TIM_CHANNEL_3)) + { + assert_param(IS_TIM_OCN_POLARITY(OC_Config->OCNPolarity)); + + /* Reset the Output N Polarity level */ + tmpccer &= ~TIM_CCER_CC3NP; + /* Set the Output N Polarity */ + tmpccer |= (OC_Config->OCNPolarity << 8U); + /* Reset the Output N State */ + tmpccer &= ~TIM_CCER_CC3NE; + } + + if (IS_TIM_BREAK_INSTANCE(TIMx)) + { + /* Check parameters */ + assert_param(IS_TIM_OCNIDLE_STATE(OC_Config->OCNIdleState)); + assert_param(IS_TIM_OCIDLE_STATE(OC_Config->OCIdleState)); + + /* Reset the Output Compare and Output Compare N IDLE State */ + tmpcr2 &= ~TIM_CR2_OIS3; + tmpcr2 &= ~TIM_CR2_OIS3N; + /* Set the Output Idle state */ + tmpcr2 |= (OC_Config->OCIdleState << 4U); + /* Set the Output N Idle state */ + tmpcr2 |= (OC_Config->OCNIdleState << 4U); + } + + /* Write to TIMx CR2 */ + TIMx->CR2 = tmpcr2; + + /* Write to TIMx CCMR2 */ + TIMx->CCMR2 = tmpccmrx; + + /* Set the Capture Compare Register value */ + TIMx->CCR3 = OC_Config->Pulse; + + /* Write to TIMx CCER */ + TIMx->CCER = tmpccer; +} + +/** + * @brief Timer Output Compare 4 configuration + * @param TIMx to select the TIM peripheral + * @param OC_Config The output configuration structure + * @retval None + */ +static void TIM_OC4_SetConfig(TIM_TypeDef *TIMx, const TIM_OC_InitTypeDef *OC_Config) +{ + uint32_t tmpccmrx; + uint32_t tmpccer; + uint32_t tmpcr2; + + /* Get the TIMx CCER register value */ + tmpccer = TIMx->CCER; + + /* Disable the Channel 4: Reset the CC4E Bit */ + TIMx->CCER &= ~TIM_CCER_CC4E; + + /* Get the TIMx CR2 register value */ + tmpcr2 = TIMx->CR2; + + /* Get the TIMx CCMR2 register value */ + tmpccmrx = TIMx->CCMR2; + + /* Reset the Output Compare mode and Capture/Compare selection Bits */ + tmpccmrx &= ~TIM_CCMR2_OC4M; + tmpccmrx &= ~TIM_CCMR2_CC4S; + + /* Select the Output Compare Mode */ + tmpccmrx |= (OC_Config->OCMode << 8U); + + /* Reset the Output Polarity level */ + tmpccer &= ~TIM_CCER_CC4P; + /* Set the Output Compare Polarity */ + tmpccer |= (OC_Config->OCPolarity << 12U); + + if (IS_TIM_BREAK_INSTANCE(TIMx)) + { + /* Check parameters */ + assert_param(IS_TIM_OCIDLE_STATE(OC_Config->OCIdleState)); + + /* Reset the Output Compare IDLE State */ + tmpcr2 &= ~TIM_CR2_OIS4; + + /* Set the Output Idle state */ + tmpcr2 |= (OC_Config->OCIdleState << 6U); + } + + /* Write to TIMx CR2 */ + TIMx->CR2 = tmpcr2; + + /* Write to TIMx CCMR2 */ + TIMx->CCMR2 = tmpccmrx; + + /* Set the Capture Compare Register value */ + TIMx->CCR4 = OC_Config->Pulse; + + /* Write to TIMx CCER */ + TIMx->CCER = tmpccer; +} + +/** + * @brief Timer Output Compare 5 configuration + * @param TIMx to select the TIM peripheral + * @param OC_Config The output configuration structure + * @retval None + */ +static void TIM_OC5_SetConfig(TIM_TypeDef *TIMx, + const TIM_OC_InitTypeDef *OC_Config) +{ + uint32_t tmpccmrx; + uint32_t tmpccer; + uint32_t tmpcr2; + + /* Get the TIMx CCER register value */ + tmpccer = TIMx->CCER; + + /* Disable the output: Reset the CCxE Bit */ + TIMx->CCER &= ~TIM_CCER_CC5E; + + /* Get the TIMx CR2 register value */ + tmpcr2 = TIMx->CR2; + /* Get the TIMx CCMR1 register value */ + tmpccmrx = TIMx->CCMR3; + + /* Reset the Output Compare Mode Bits */ + tmpccmrx &= ~(TIM_CCMR3_OC5M); + /* Select the Output Compare Mode */ + tmpccmrx |= OC_Config->OCMode; + + /* Reset the Output Polarity level */ + tmpccer &= ~TIM_CCER_CC5P; + /* Set the Output Compare Polarity */ + tmpccer |= (OC_Config->OCPolarity << 16U); + + if (IS_TIM_BREAK_INSTANCE(TIMx)) + { + /* Reset the Output Compare IDLE State */ + tmpcr2 &= ~TIM_CR2_OIS5; + /* Set the Output Idle state */ + tmpcr2 |= (OC_Config->OCIdleState << 8U); + } + /* Write to TIMx CR2 */ + TIMx->CR2 = tmpcr2; + + /* Write to TIMx CCMR3 */ + TIMx->CCMR3 = tmpccmrx; + + /* Set the Capture Compare Register value */ + TIMx->CCR5 = OC_Config->Pulse; + + /* Write to TIMx CCER */ + TIMx->CCER = tmpccer; +} + +/** + * @brief Timer Output Compare 6 configuration + * @param TIMx to select the TIM peripheral + * @param OC_Config The output configuration structure + * @retval None + */ +static void TIM_OC6_SetConfig(TIM_TypeDef *TIMx, + const TIM_OC_InitTypeDef *OC_Config) +{ + uint32_t tmpccmrx; + uint32_t tmpccer; + uint32_t tmpcr2; + + /* Get the TIMx CCER register value */ + tmpccer = TIMx->CCER; + + /* Disable the output: Reset the CCxE Bit */ + TIMx->CCER &= ~TIM_CCER_CC6E; + + /* Get the TIMx CR2 register value */ + tmpcr2 = TIMx->CR2; + /* Get the TIMx CCMR1 register value */ + tmpccmrx = TIMx->CCMR3; + + /* Reset the Output Compare Mode Bits */ + tmpccmrx &= ~(TIM_CCMR3_OC6M); + /* Select the Output Compare Mode */ + tmpccmrx |= (OC_Config->OCMode << 8U); + + /* Reset the Output Polarity level */ + tmpccer &= (uint32_t)~TIM_CCER_CC6P; + /* Set the Output Compare Polarity */ + tmpccer |= (OC_Config->OCPolarity << 20U); + + if (IS_TIM_BREAK_INSTANCE(TIMx)) + { + /* Reset the Output Compare IDLE State */ + tmpcr2 &= ~TIM_CR2_OIS6; + /* Set the Output Idle state */ + tmpcr2 |= (OC_Config->OCIdleState << 10U); + } + + /* Write to TIMx CR2 */ + TIMx->CR2 = tmpcr2; + + /* Write to TIMx CCMR3 */ + TIMx->CCMR3 = tmpccmrx; + + /* Set the Capture Compare Register value */ + TIMx->CCR6 = OC_Config->Pulse; + + /* Write to TIMx CCER */ + TIMx->CCER = tmpccer; +} + +/** + * @brief Slave Timer configuration function + * @param htim TIM handle + * @param sSlaveConfig Slave timer configuration + * @retval None + */ +static HAL_StatusTypeDef TIM_SlaveTimer_SetConfig(TIM_HandleTypeDef *htim, + const TIM_SlaveConfigTypeDef *sSlaveConfig) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t tmpsmcr; + uint32_t tmpccmr1; + uint32_t tmpccer; + + /* Get the TIMx SMCR register value */ + tmpsmcr = htim->Instance->SMCR; + + /* Reset the Trigger Selection Bits */ + tmpsmcr &= ~TIM_SMCR_TS; + /* Set the Input Trigger source */ + tmpsmcr |= sSlaveConfig->InputTrigger; + + /* Reset the slave mode Bits */ + tmpsmcr &= ~TIM_SMCR_SMS; + /* Set the slave mode */ + tmpsmcr |= sSlaveConfig->SlaveMode; + + /* Write to TIMx SMCR */ + htim->Instance->SMCR = tmpsmcr; + + /* Configure the trigger prescaler, filter, and polarity */ + switch (sSlaveConfig->InputTrigger) + { + case TIM_TS_ETRF: + { + /* Check the parameters */ + assert_param(IS_TIM_CLOCKSOURCE_ETRMODE1_INSTANCE(htim->Instance)); + assert_param(IS_TIM_TRIGGERPRESCALER(sSlaveConfig->TriggerPrescaler)); + assert_param(IS_TIM_TRIGGERPOLARITY(sSlaveConfig->TriggerPolarity)); + assert_param(IS_TIM_TRIGGERFILTER(sSlaveConfig->TriggerFilter)); + /* Configure the ETR Trigger source */ + TIM_ETR_SetConfig(htim->Instance, + sSlaveConfig->TriggerPrescaler, + sSlaveConfig->TriggerPolarity, + sSlaveConfig->TriggerFilter); + break; + } + + case TIM_TS_TI1F_ED: + { + /* Check the parameters */ + assert_param(IS_TIM_CC1_INSTANCE(htim->Instance)); + assert_param(IS_TIM_TRIGGERFILTER(sSlaveConfig->TriggerFilter)); + + if (sSlaveConfig->SlaveMode == TIM_SLAVEMODE_GATED) + { + return HAL_ERROR; + } + + /* Disable the Channel 1: Reset the CC1E Bit */ + tmpccer = htim->Instance->CCER; + htim->Instance->CCER &= ~TIM_CCER_CC1E; + tmpccmr1 = htim->Instance->CCMR1; + + /* Set the filter */ + tmpccmr1 &= ~TIM_CCMR1_IC1F; + tmpccmr1 |= ((sSlaveConfig->TriggerFilter) << 4U); + + /* Write to TIMx CCMR1 and CCER registers */ + htim->Instance->CCMR1 = tmpccmr1; + htim->Instance->CCER = tmpccer; + break; + } + + case TIM_TS_TI1FP1: + { + /* Check the parameters */ + assert_param(IS_TIM_CC1_INSTANCE(htim->Instance)); + assert_param(IS_TIM_TRIGGERPOLARITY(sSlaveConfig->TriggerPolarity)); + assert_param(IS_TIM_TRIGGERFILTER(sSlaveConfig->TriggerFilter)); + + /* Configure TI1 Filter and Polarity */ + TIM_TI1_ConfigInputStage(htim->Instance, + sSlaveConfig->TriggerPolarity, + sSlaveConfig->TriggerFilter); + break; + } + + case TIM_TS_TI2FP2: + { + /* Check the parameters */ + assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); + assert_param(IS_TIM_TRIGGERPOLARITY(sSlaveConfig->TriggerPolarity)); + assert_param(IS_TIM_TRIGGERFILTER(sSlaveConfig->TriggerFilter)); + + /* Configure TI2 Filter and Polarity */ + TIM_TI2_ConfigInputStage(htim->Instance, + sSlaveConfig->TriggerPolarity, + sSlaveConfig->TriggerFilter); + break; + } + + case TIM_TS_ITR0: + case TIM_TS_ITR1: + case TIM_TS_ITR2: + case TIM_TS_ITR3: + { + /* Check the parameter */ + assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); + break; + } + + default: + status = HAL_ERROR; + break; + } + + return status; +} + +/** + * @brief Configure the TI1 as Input. + * @param TIMx to select the TIM peripheral. + * @param TIM_ICPolarity The Input Polarity. + * This parameter can be one of the following values: + * @arg TIM_ICPOLARITY_RISING + * @arg TIM_ICPOLARITY_FALLING + * @arg TIM_ICPOLARITY_BOTHEDGE + * @param TIM_ICSelection specifies the input to be used. + * This parameter can be one of the following values: + * @arg TIM_ICSELECTION_DIRECTTI: TIM Input 1 is selected to be connected to IC1. + * @arg TIM_ICSELECTION_INDIRECTTI: TIM Input 1 is selected to be connected to IC2. + * @arg TIM_ICSELECTION_TRC: TIM Input 1 is selected to be connected to TRC. + * @param TIM_ICFilter Specifies the Input Capture Filter. + * This parameter must be a value between 0x00 and 0x0F. + * @retval None + * @note TIM_ICFilter and TIM_ICPolarity are not used in INDIRECT mode as TI2FP1 + * (on channel2 path) is used as the input signal. Therefore CCMR1 must be + * protected against un-initialized filter and polarity values. + */ +void TIM_TI1_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, + uint32_t TIM_ICFilter) +{ + uint32_t tmpccmr1; + uint32_t tmpccer; + + /* Disable the Channel 1: Reset the CC1E Bit */ + tmpccer = TIMx->CCER; + TIMx->CCER &= ~TIM_CCER_CC1E; + tmpccmr1 = TIMx->CCMR1; + + /* Select the Input */ + if (IS_TIM_CC2_INSTANCE(TIMx) != RESET) + { + tmpccmr1 &= ~TIM_CCMR1_CC1S; + tmpccmr1 |= TIM_ICSelection; + } + else + { + tmpccmr1 |= TIM_CCMR1_CC1S_0; + } + + /* Set the filter */ + tmpccmr1 &= ~TIM_CCMR1_IC1F; + tmpccmr1 |= ((TIM_ICFilter << 4U) & TIM_CCMR1_IC1F); + + /* Select the Polarity and set the CC1E Bit */ + tmpccer &= ~(TIM_CCER_CC1P | TIM_CCER_CC1NP); + tmpccer |= (TIM_ICPolarity & (TIM_CCER_CC1P | TIM_CCER_CC1NP)); + + /* Write to TIMx CCMR1 and CCER registers */ + TIMx->CCMR1 = tmpccmr1; + TIMx->CCER = tmpccer; +} + +/** + * @brief Configure the Polarity and Filter for TI1. + * @param TIMx to select the TIM peripheral. + * @param TIM_ICPolarity The Input Polarity. + * This parameter can be one of the following values: + * @arg TIM_ICPOLARITY_RISING + * @arg TIM_ICPOLARITY_FALLING + * @arg TIM_ICPOLARITY_BOTHEDGE + * @param TIM_ICFilter Specifies the Input Capture Filter. + * This parameter must be a value between 0x00 and 0x0F. + * @retval None + */ +static void TIM_TI1_ConfigInputStage(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICFilter) +{ + uint32_t tmpccmr1; + uint32_t tmpccer; + + /* Disable the Channel 1: Reset the CC1E Bit */ + tmpccer = TIMx->CCER; + TIMx->CCER &= ~TIM_CCER_CC1E; + tmpccmr1 = TIMx->CCMR1; + + /* Set the filter */ + tmpccmr1 &= ~TIM_CCMR1_IC1F; + tmpccmr1 |= (TIM_ICFilter << 4U); + + /* Select the Polarity and set the CC1E Bit */ + tmpccer &= ~(TIM_CCER_CC1P | TIM_CCER_CC1NP); + tmpccer |= TIM_ICPolarity; + + /* Write to TIMx CCMR1 and CCER registers */ + TIMx->CCMR1 = tmpccmr1; + TIMx->CCER = tmpccer; +} + +/** + * @brief Configure the TI2 as Input. + * @param TIMx to select the TIM peripheral + * @param TIM_ICPolarity The Input Polarity. + * This parameter can be one of the following values: + * @arg TIM_ICPOLARITY_RISING + * @arg TIM_ICPOLARITY_FALLING + * @arg TIM_ICPOLARITY_BOTHEDGE + * @param TIM_ICSelection specifies the input to be used. + * This parameter can be one of the following values: + * @arg TIM_ICSELECTION_DIRECTTI: TIM Input 2 is selected to be connected to IC2. + * @arg TIM_ICSELECTION_INDIRECTTI: TIM Input 2 is selected to be connected to IC1. + * @arg TIM_ICSELECTION_TRC: TIM Input 2 is selected to be connected to TRC. + * @param TIM_ICFilter Specifies the Input Capture Filter. + * This parameter must be a value between 0x00 and 0x0F. + * @retval None + * @note TIM_ICFilter and TIM_ICPolarity are not used in INDIRECT mode as TI1FP2 + * (on channel1 path) is used as the input signal. Therefore CCMR1 must be + * protected against un-initialized filter and polarity values. + */ +static void TIM_TI2_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, + uint32_t TIM_ICFilter) +{ + uint32_t tmpccmr1; + uint32_t tmpccer; + + /* Disable the Channel 2: Reset the CC2E Bit */ + tmpccer = TIMx->CCER; + TIMx->CCER &= ~TIM_CCER_CC2E; + tmpccmr1 = TIMx->CCMR1; + + /* Select the Input */ + tmpccmr1 &= ~TIM_CCMR1_CC2S; + tmpccmr1 |= (TIM_ICSelection << 8U); + + /* Set the filter */ + tmpccmr1 &= ~TIM_CCMR1_IC2F; + tmpccmr1 |= ((TIM_ICFilter << 12U) & TIM_CCMR1_IC2F); + + /* Select the Polarity and set the CC2E Bit */ + tmpccer &= ~(TIM_CCER_CC2P | TIM_CCER_CC2NP); + tmpccer |= ((TIM_ICPolarity << 4U) & (TIM_CCER_CC2P | TIM_CCER_CC2NP)); + + /* Write to TIMx CCMR1 and CCER registers */ + TIMx->CCMR1 = tmpccmr1 ; + TIMx->CCER = tmpccer; +} + +/** + * @brief Configure the Polarity and Filter for TI2. + * @param TIMx to select the TIM peripheral. + * @param TIM_ICPolarity The Input Polarity. + * This parameter can be one of the following values: + * @arg TIM_ICPOLARITY_RISING + * @arg TIM_ICPOLARITY_FALLING + * @arg TIM_ICPOLARITY_BOTHEDGE + * @param TIM_ICFilter Specifies the Input Capture Filter. + * This parameter must be a value between 0x00 and 0x0F. + * @retval None + */ +static void TIM_TI2_ConfigInputStage(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICFilter) +{ + uint32_t tmpccmr1; + uint32_t tmpccer; + + /* Disable the Channel 2: Reset the CC2E Bit */ + tmpccer = TIMx->CCER; + TIMx->CCER &= ~TIM_CCER_CC2E; + tmpccmr1 = TIMx->CCMR1; + + /* Set the filter */ + tmpccmr1 &= ~TIM_CCMR1_IC2F; + tmpccmr1 |= (TIM_ICFilter << 12U); + + /* Select the Polarity and set the CC2E Bit */ + tmpccer &= ~(TIM_CCER_CC2P | TIM_CCER_CC2NP); + tmpccer |= (TIM_ICPolarity << 4U); + + /* Write to TIMx CCMR1 and CCER registers */ + TIMx->CCMR1 = tmpccmr1 ; + TIMx->CCER = tmpccer; +} + +/** + * @brief Configure the TI3 as Input. + * @param TIMx to select the TIM peripheral + * @param TIM_ICPolarity The Input Polarity. + * This parameter can be one of the following values: + * @arg TIM_ICPOLARITY_RISING + * @arg TIM_ICPOLARITY_FALLING + * @arg TIM_ICPOLARITY_BOTHEDGE + * @param TIM_ICSelection specifies the input to be used. + * This parameter can be one of the following values: + * @arg TIM_ICSELECTION_DIRECTTI: TIM Input 3 is selected to be connected to IC3. + * @arg TIM_ICSELECTION_INDIRECTTI: TIM Input 3 is selected to be connected to IC4. + * @arg TIM_ICSELECTION_TRC: TIM Input 3 is selected to be connected to TRC. + * @param TIM_ICFilter Specifies the Input Capture Filter. + * This parameter must be a value between 0x00 and 0x0F. + * @retval None + * @note TIM_ICFilter and TIM_ICPolarity are not used in INDIRECT mode as TI3FP4 + * (on channel1 path) is used as the input signal. Therefore CCMR2 must be + * protected against un-initialized filter and polarity values. + */ +static void TIM_TI3_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, + uint32_t TIM_ICFilter) +{ + uint32_t tmpccmr2; + uint32_t tmpccer; + + /* Disable the Channel 3: Reset the CC3E Bit */ + tmpccer = TIMx->CCER; + TIMx->CCER &= ~TIM_CCER_CC3E; + tmpccmr2 = TIMx->CCMR2; + + /* Select the Input */ + tmpccmr2 &= ~TIM_CCMR2_CC3S; + tmpccmr2 |= TIM_ICSelection; + + /* Set the filter */ + tmpccmr2 &= ~TIM_CCMR2_IC3F; + tmpccmr2 |= ((TIM_ICFilter << 4U) & TIM_CCMR2_IC3F); + + /* Select the Polarity and set the CC3E Bit */ + tmpccer &= ~(TIM_CCER_CC3P | TIM_CCER_CC3NP); + tmpccer |= ((TIM_ICPolarity << 8U) & (TIM_CCER_CC3P | TIM_CCER_CC3NP)); + + /* Write to TIMx CCMR2 and CCER registers */ + TIMx->CCMR2 = tmpccmr2; + TIMx->CCER = tmpccer; +} + +/** + * @brief Configure the TI4 as Input. + * @param TIMx to select the TIM peripheral + * @param TIM_ICPolarity The Input Polarity. + * This parameter can be one of the following values: + * @arg TIM_ICPOLARITY_RISING + * @arg TIM_ICPOLARITY_FALLING + * @arg TIM_ICPOLARITY_BOTHEDGE + * @param TIM_ICSelection specifies the input to be used. + * This parameter can be one of the following values: + * @arg TIM_ICSELECTION_DIRECTTI: TIM Input 4 is selected to be connected to IC4. + * @arg TIM_ICSELECTION_INDIRECTTI: TIM Input 4 is selected to be connected to IC3. + * @arg TIM_ICSELECTION_TRC: TIM Input 4 is selected to be connected to TRC. + * @param TIM_ICFilter Specifies the Input Capture Filter. + * This parameter must be a value between 0x00 and 0x0F. + * @note TIM_ICFilter and TIM_ICPolarity are not used in INDIRECT mode as TI4FP3 + * (on channel1 path) is used as the input signal. Therefore CCMR2 must be + * protected against un-initialized filter and polarity values. + * @retval None + */ +static void TIM_TI4_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, + uint32_t TIM_ICFilter) +{ + uint32_t tmpccmr2; + uint32_t tmpccer; + + /* Disable the Channel 4: Reset the CC4E Bit */ + tmpccer = TIMx->CCER; + TIMx->CCER &= ~TIM_CCER_CC4E; + tmpccmr2 = TIMx->CCMR2; + + /* Select the Input */ + tmpccmr2 &= ~TIM_CCMR2_CC4S; + tmpccmr2 |= (TIM_ICSelection << 8U); + + /* Set the filter */ + tmpccmr2 &= ~TIM_CCMR2_IC4F; + tmpccmr2 |= ((TIM_ICFilter << 12U) & TIM_CCMR2_IC4F); + + /* Select the Polarity and set the CC4E Bit */ + tmpccer &= ~(TIM_CCER_CC4P | TIM_CCER_CC4NP); + tmpccer |= ((TIM_ICPolarity << 12U) & (TIM_CCER_CC4P | TIM_CCER_CC4NP)); + + /* Write to TIMx CCMR2 and CCER registers */ + TIMx->CCMR2 = tmpccmr2; + TIMx->CCER = tmpccer ; +} + +/** + * @brief Selects the Input Trigger source + * @param TIMx to select the TIM peripheral + * @param InputTriggerSource The Input Trigger source. + * This parameter can be one of the following values: + * @arg TIM_TS_ITR0: Internal Trigger 0 + * @arg TIM_TS_ITR1: Internal Trigger 1 + * @arg TIM_TS_ITR2: Internal Trigger 2 + * @arg TIM_TS_ITR3: Internal Trigger 3 + * @arg TIM_TS_TI1F_ED: TI1 Edge Detector + * @arg TIM_TS_TI1FP1: Filtered Timer Input 1 + * @arg TIM_TS_TI2FP2: Filtered Timer Input 2 + * @arg TIM_TS_ETRF: External Trigger input + * @retval None + */ +static void TIM_ITRx_SetConfig(TIM_TypeDef *TIMx, uint32_t InputTriggerSource) +{ + uint32_t tmpsmcr; + + /* Get the TIMx SMCR register value */ + tmpsmcr = TIMx->SMCR; + /* Reset the TS Bits */ + tmpsmcr &= ~TIM_SMCR_TS; + /* Set the Input Trigger source and the slave mode*/ + tmpsmcr |= (InputTriggerSource | TIM_SLAVEMODE_EXTERNAL1); + /* Write to TIMx SMCR */ + TIMx->SMCR = tmpsmcr; +} +/** + * @brief Configures the TIMx External Trigger (ETR). + * @param TIMx to select the TIM peripheral + * @param TIM_ExtTRGPrescaler The external Trigger Prescaler. + * This parameter can be one of the following values: + * @arg TIM_ETRPRESCALER_DIV1: ETRP Prescaler OFF. + * @arg TIM_ETRPRESCALER_DIV2: ETRP frequency divided by 2. + * @arg TIM_ETRPRESCALER_DIV4: ETRP frequency divided by 4. + * @arg TIM_ETRPRESCALER_DIV8: ETRP frequency divided by 8. + * @param TIM_ExtTRGPolarity The external Trigger Polarity. + * This parameter can be one of the following values: + * @arg TIM_ETRPOLARITY_INVERTED: active low or falling edge active. + * @arg TIM_ETRPOLARITY_NONINVERTED: active high or rising edge active. + * @param ExtTRGFilter External Trigger Filter. + * This parameter must be a value between 0x00 and 0x0F + * @retval None + */ +void TIM_ETR_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ExtTRGPrescaler, + uint32_t TIM_ExtTRGPolarity, uint32_t ExtTRGFilter) +{ + uint32_t tmpsmcr; + + tmpsmcr = TIMx->SMCR; + + /* Reset the ETR Bits */ + tmpsmcr &= ~(TIM_SMCR_ETF | TIM_SMCR_ETPS | TIM_SMCR_ECE | TIM_SMCR_ETP); + + /* Set the Prescaler, the Filter value and the Polarity */ + tmpsmcr |= (uint32_t)(TIM_ExtTRGPrescaler | (TIM_ExtTRGPolarity | (ExtTRGFilter << 8U))); + + /* Write to TIMx SMCR */ + TIMx->SMCR = tmpsmcr; +} + +/** + * @brief Enables or disables the TIM Capture Compare Channel x. + * @param TIMx to select the TIM peripheral + * @param Channel specifies the TIM Channel + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 + * @arg TIM_CHANNEL_2: TIM Channel 2 + * @arg TIM_CHANNEL_3: TIM Channel 3 + * @arg TIM_CHANNEL_4: TIM Channel 4 + * @arg TIM_CHANNEL_5: TIM Channel 5 selected + * @arg TIM_CHANNEL_6: TIM Channel 6 selected + * @param ChannelState specifies the TIM Channel CCxE bit new state. + * This parameter can be: TIM_CCx_ENABLE or TIM_CCx_DISABLE. + * @retval None + */ +void TIM_CCxChannelCmd(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t ChannelState) +{ + uint32_t tmp; + + /* Check the parameters */ + assert_param(IS_TIM_CC1_INSTANCE(TIMx)); + assert_param(IS_TIM_CHANNELS(Channel)); + + tmp = TIM_CCER_CC1E << (Channel & 0x1FU); /* 0x1FU = 31 bits max shift */ + + /* Reset the CCxE Bit */ + TIMx->CCER &= ~tmp; + + /* Set or reset the CCxE Bit */ + TIMx->CCER |= (uint32_t)(ChannelState << (Channel & 0x1FU)); /* 0x1FU = 31 bits max shift */ +} + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) +/** + * @brief Reset interrupt callbacks to the legacy weak callbacks. + * @param htim pointer to a TIM_HandleTypeDef structure that contains + * the configuration information for TIM module. + * @retval None + */ +void TIM_ResetCallback(TIM_HandleTypeDef *htim) +{ + /* Reset the TIM callback to the legacy weak callbacks */ + htim->PeriodElapsedCallback = HAL_TIM_PeriodElapsedCallback; + htim->PeriodElapsedHalfCpltCallback = HAL_TIM_PeriodElapsedHalfCpltCallback; + htim->TriggerCallback = HAL_TIM_TriggerCallback; + htim->TriggerHalfCpltCallback = HAL_TIM_TriggerHalfCpltCallback; + htim->IC_CaptureCallback = HAL_TIM_IC_CaptureCallback; + htim->IC_CaptureHalfCpltCallback = HAL_TIM_IC_CaptureHalfCpltCallback; + htim->OC_DelayElapsedCallback = HAL_TIM_OC_DelayElapsedCallback; + htim->PWM_PulseFinishedCallback = HAL_TIM_PWM_PulseFinishedCallback; + htim->PWM_PulseFinishedHalfCpltCallback = HAL_TIM_PWM_PulseFinishedHalfCpltCallback; + htim->ErrorCallback = HAL_TIM_ErrorCallback; + htim->CommutationCallback = HAL_TIMEx_CommutCallback; + htim->CommutationHalfCpltCallback = HAL_TIMEx_CommutHalfCpltCallback; + htim->BreakCallback = HAL_TIMEx_BreakCallback; + htim->Break2Callback = HAL_TIMEx_Break2Callback; +} +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + +/** + * @} + */ + +#endif /* HAL_TIM_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ diff --git a/CablePositioning_IAP_V1.0/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_tim_ex.c b/CablePositioning_IAP_V1.0/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_tim_ex.c index 38c8a2b..6ddded0 100644 --- a/CablePositioning_IAP_V1.0/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_tim_ex.c +++ b/CablePositioning_IAP_V1.0/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_tim_ex.c @@ -1,2841 +1,2820 @@ -/** - ****************************************************************************** - * @file stm32l4xx_hal_tim_ex.c - * @author MCD Application Team - * @brief TIM HAL module driver. - * This file provides firmware functions to manage the following - * functionalities of the Timer Extended peripheral: - * + Time Hall Sensor Interface Initialization - * + Time Hall Sensor Interface Start - * + Time Complementary signal break and dead time configuration - * + Time Master and Slave synchronization configuration - * + Time Output Compare/PWM Channel Configuration (for channels 5 and 6) - * + Time OCRef clear configuration - * + Timer remapping capabilities configuration - ****************************************************************************** - * @attention - * - * Copyright (c) 2017 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - @verbatim - ============================================================================== - ##### TIMER Extended features ##### - ============================================================================== - [..] - The Timer Extended features include: - (#) Complementary outputs with programmable dead-time for : - (++) Output Compare - (++) PWM generation (Edge and Center-aligned Mode) - (++) One-pulse mode output - (#) Synchronization circuit to control the timer with external signals and to - interconnect several timers together. - (#) Break input to put the timer output signals in reset state or in a known state. - (#) Supports incremental (quadrature) encoder and hall-sensor circuitry for - positioning purposes - - ##### How to use this driver ##### - ============================================================================== - [..] - (#) Initialize the TIM low level resources by implementing the following functions - depending on the selected feature: - (++) Hall Sensor output : HAL_TIMEx_HallSensor_MspInit() - - (#) Initialize the TIM low level resources : - (##) Enable the TIM interface clock using __HAL_RCC_TIMx_CLK_ENABLE(); - (##) TIM pins configuration - (+++) Enable the clock for the TIM GPIOs using the following function: - __HAL_RCC_GPIOx_CLK_ENABLE(); - (+++) Configure these TIM pins in Alternate function mode using HAL_GPIO_Init(); - - (#) The external Clock can be configured, if needed (the default clock is the - internal clock from the APBx), using the following function: - HAL_TIM_ConfigClockSource, the clock configuration should be done before - any start function. - - (#) Configure the TIM in the desired functioning mode using one of the - initialization function of this driver: - (++) HAL_TIMEx_HallSensor_Init() and HAL_TIMEx_ConfigCommutEvent(): to use the - Timer Hall Sensor Interface and the commutation event with the corresponding - Interrupt and DMA request if needed (Note that One Timer is used to interface - with the Hall sensor Interface and another Timer should be used to use - the commutation event). - - (#) Activate the TIM peripheral using one of the start functions: - (++) Complementary Output Compare : HAL_TIMEx_OCN_Start(), HAL_TIMEx_OCN_Start_DMA(), - HAL_TIMEx_OCN_Start_IT() - (++) Complementary PWM generation : HAL_TIMEx_PWMN_Start(), HAL_TIMEx_PWMN_Start_DMA(), - HAL_TIMEx_PWMN_Start_IT() - (++) Complementary One-pulse mode output : HAL_TIMEx_OnePulseN_Start(), HAL_TIMEx_OnePulseN_Start_IT() - (++) Hall Sensor output : HAL_TIMEx_HallSensor_Start(), HAL_TIMEx_HallSensor_Start_DMA(), - HAL_TIMEx_HallSensor_Start_IT(). - - @endverbatim - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32l4xx_hal.h" - -/** @addtogroup STM32L4xx_HAL_Driver - * @{ - */ - -/** @defgroup TIMEx TIMEx - * @brief TIM Extended HAL module driver - * @{ - */ - -#ifdef HAL_TIM_MODULE_ENABLED - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -/* Private macros ------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ -static void TIM_DMADelayPulseNCplt(DMA_HandleTypeDef *hdma); -static void TIM_DMAErrorCCxN(DMA_HandleTypeDef *hdma); -static void TIM_CCxNChannelCmd(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t ChannelNState); - -/* Exported functions --------------------------------------------------------*/ -/** @defgroup TIMEx_Exported_Functions TIM Extended Exported Functions - * @{ - */ - -/** @defgroup TIMEx_Exported_Functions_Group1 Extended Timer Hall Sensor functions - * @brief Timer Hall Sensor functions - * -@verbatim - ============================================================================== - ##### Timer Hall Sensor functions ##### - ============================================================================== - [..] - This section provides functions allowing to: - (+) Initialize and configure TIM HAL Sensor. - (+) De-initialize TIM HAL Sensor. - (+) Start the Hall Sensor Interface. - (+) Stop the Hall Sensor Interface. - (+) Start the Hall Sensor Interface and enable interrupts. - (+) Stop the Hall Sensor Interface and disable interrupts. - (+) Start the Hall Sensor Interface and enable DMA transfers. - (+) Stop the Hall Sensor Interface and disable DMA transfers. - -@endverbatim - * @{ - */ -/** - * @brief Initializes the TIM Hall Sensor Interface and initialize the associated handle. - * @note When the timer instance is initialized in Hall Sensor Interface mode, - * timer channels 1 and channel 2 are reserved and cannot be used for - * other purpose. - * @param htim TIM Hall Sensor Interface handle - * @param sConfig TIM Hall Sensor configuration structure - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIMEx_HallSensor_Init(TIM_HandleTypeDef *htim, const TIM_HallSensor_InitTypeDef *sConfig) -{ - TIM_OC_InitTypeDef OC_Config; - - /* Check the TIM handle allocation */ - if (htim == NULL) - { - return HAL_ERROR; - } - - /* Check the parameters */ - assert_param(IS_TIM_HALL_SENSOR_INTERFACE_INSTANCE(htim->Instance)); - assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode)); - assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision)); - assert_param(IS_TIM_AUTORELOAD_PRELOAD(htim->Init.AutoReloadPreload)); - assert_param(IS_TIM_IC_POLARITY(sConfig->IC1Polarity)); - assert_param(IS_TIM_PERIOD(htim, htim->Init.Period)); - assert_param(IS_TIM_IC_PRESCALER(sConfig->IC1Prescaler)); - assert_param(IS_TIM_IC_FILTER(sConfig->IC1Filter)); - - if (htim->State == HAL_TIM_STATE_RESET) - { - /* Allocate lock resource and initialize it */ - htim->Lock = HAL_UNLOCKED; - -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) - /* Reset interrupt callbacks to legacy week callbacks */ - TIM_ResetCallback(htim); - - if (htim->HallSensor_MspInitCallback == NULL) - { - htim->HallSensor_MspInitCallback = HAL_TIMEx_HallSensor_MspInit; - } - /* Init the low level hardware : GPIO, CLOCK, NVIC */ - htim->HallSensor_MspInitCallback(htim); -#else - /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */ - HAL_TIMEx_HallSensor_MspInit(htim); -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ - } - - /* Set the TIM state */ - htim->State = HAL_TIM_STATE_BUSY; - - /* Configure the Time base in the Encoder Mode */ - TIM_Base_SetConfig(htim->Instance, &htim->Init); - - /* Configure the Channel 1 as Input Channel to interface with the three Outputs of the Hall sensor */ - TIM_TI1_SetConfig(htim->Instance, sConfig->IC1Polarity, TIM_ICSELECTION_TRC, sConfig->IC1Filter); - - /* Reset the IC1PSC Bits */ - htim->Instance->CCMR1 &= ~TIM_CCMR1_IC1PSC; - /* Set the IC1PSC value */ - htim->Instance->CCMR1 |= sConfig->IC1Prescaler; - - /* Enable the Hall sensor interface (XOR function of the three inputs) */ - htim->Instance->CR2 |= TIM_CR2_TI1S; - - /* Select the TIM_TS_TI1F_ED signal as Input trigger for the TIM */ - htim->Instance->SMCR &= ~TIM_SMCR_TS; - htim->Instance->SMCR |= TIM_TS_TI1F_ED; - - /* Use the TIM_TS_TI1F_ED signal to reset the TIM counter each edge detection */ - htim->Instance->SMCR &= ~TIM_SMCR_SMS; - htim->Instance->SMCR |= TIM_SLAVEMODE_RESET; - - /* Program channel 2 in PWM 2 mode with the desired Commutation_Delay*/ - OC_Config.OCFastMode = TIM_OCFAST_DISABLE; - OC_Config.OCIdleState = TIM_OCIDLESTATE_RESET; - OC_Config.OCMode = TIM_OCMODE_PWM2; - OC_Config.OCNIdleState = TIM_OCNIDLESTATE_RESET; - OC_Config.OCNPolarity = TIM_OCNPOLARITY_HIGH; - OC_Config.OCPolarity = TIM_OCPOLARITY_HIGH; - OC_Config.Pulse = sConfig->Commutation_Delay; - - TIM_OC2_SetConfig(htim->Instance, &OC_Config); - - /* Select OC2REF as trigger output on TRGO: write the MMS bits in the TIMx_CR2 - register to 101 */ - htim->Instance->CR2 &= ~TIM_CR2_MMS; - htim->Instance->CR2 |= TIM_TRGO_OC2REF; - - /* Initialize the DMA burst operation state */ - htim->DMABurstState = HAL_DMA_BURST_STATE_READY; - - /* Initialize the TIM channels state */ - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); - - /* Initialize the TIM state*/ - htim->State = HAL_TIM_STATE_READY; - - return HAL_OK; -} - -/** - * @brief DeInitializes the TIM Hall Sensor interface - * @param htim TIM Hall Sensor Interface handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIMEx_HallSensor_DeInit(TIM_HandleTypeDef *htim) -{ - /* Check the parameters */ - assert_param(IS_TIM_INSTANCE(htim->Instance)); - - htim->State = HAL_TIM_STATE_BUSY; - - /* Disable the TIM Peripheral Clock */ - __HAL_TIM_DISABLE(htim); - -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) - if (htim->HallSensor_MspDeInitCallback == NULL) - { - htim->HallSensor_MspDeInitCallback = HAL_TIMEx_HallSensor_MspDeInit; - } - /* DeInit the low level hardware */ - htim->HallSensor_MspDeInitCallback(htim); -#else - /* DeInit the low level hardware: GPIO, CLOCK, NVIC */ - HAL_TIMEx_HallSensor_MspDeInit(htim); -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ - - /* Change the DMA burst operation state */ - htim->DMABurstState = HAL_DMA_BURST_STATE_RESET; - - /* Change the TIM channels state */ - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_RESET); - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_RESET); - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_RESET); - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_RESET); - - /* Change TIM state */ - htim->State = HAL_TIM_STATE_RESET; - - /* Release Lock */ - __HAL_UNLOCK(htim); - - return HAL_OK; -} - -/** - * @brief Initializes the TIM Hall Sensor MSP. - * @param htim TIM Hall Sensor Interface handle - * @retval None - */ -__weak void HAL_TIMEx_HallSensor_MspInit(TIM_HandleTypeDef *htim) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(htim); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_TIMEx_HallSensor_MspInit could be implemented in the user file - */ -} - -/** - * @brief DeInitializes TIM Hall Sensor MSP. - * @param htim TIM Hall Sensor Interface handle - * @retval None - */ -__weak void HAL_TIMEx_HallSensor_MspDeInit(TIM_HandleTypeDef *htim) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(htim); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_TIMEx_HallSensor_MspDeInit could be implemented in the user file - */ -} - -/** - * @brief Starts the TIM Hall Sensor Interface. - * @param htim TIM Hall Sensor Interface handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start(TIM_HandleTypeDef *htim) -{ - uint32_t tmpsmcr; - HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1); - HAL_TIM_ChannelStateTypeDef channel_2_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_2); - HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1); - HAL_TIM_ChannelStateTypeDef complementary_channel_2_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_2); - - /* Check the parameters */ - assert_param(IS_TIM_HALL_SENSOR_INTERFACE_INSTANCE(htim->Instance)); - - /* Check the TIM channels state */ - if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY) - || (channel_2_state != HAL_TIM_CHANNEL_STATE_READY) - || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY) - || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY)) - { - return HAL_ERROR; - } - - /* Set the TIM channels state */ - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); - - /* Enable the Input Capture channel 1 - (in the Hall Sensor Interface the three possible channels that can be used are TIM_CHANNEL_1, - TIM_CHANNEL_2 and TIM_CHANNEL_3) */ - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); - - /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ - if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) - { - tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; - if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) - { - __HAL_TIM_ENABLE(htim); - } - } - else - { - __HAL_TIM_ENABLE(htim); - } - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Stops the TIM Hall sensor Interface. - * @param htim TIM Hall Sensor Interface handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop(TIM_HandleTypeDef *htim) -{ - /* Check the parameters */ - assert_param(IS_TIM_HALL_SENSOR_INTERFACE_INSTANCE(htim->Instance)); - - /* Disable the Input Capture channels 1, 2 and 3 - (in the Hall Sensor Interface the three possible channels that can be used are TIM_CHANNEL_1, - TIM_CHANNEL_2 and TIM_CHANNEL_3) */ - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); - - /* Disable the Peripheral */ - __HAL_TIM_DISABLE(htim); - - /* Set the TIM channels state */ - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Starts the TIM Hall Sensor Interface in interrupt mode. - * @param htim TIM Hall Sensor Interface handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_IT(TIM_HandleTypeDef *htim) -{ - uint32_t tmpsmcr; - HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1); - HAL_TIM_ChannelStateTypeDef channel_2_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_2); - HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1); - HAL_TIM_ChannelStateTypeDef complementary_channel_2_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_2); - - /* Check the parameters */ - assert_param(IS_TIM_HALL_SENSOR_INTERFACE_INSTANCE(htim->Instance)); - - /* Check the TIM channels state */ - if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY) - || (channel_2_state != HAL_TIM_CHANNEL_STATE_READY) - || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY) - || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY)) - { - return HAL_ERROR; - } - - /* Set the TIM channels state */ - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); - - /* Enable the capture compare Interrupts 1 event */ - __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); - - /* Enable the Input Capture channel 1 - (in the Hall Sensor Interface the three possible channels that can be used are TIM_CHANNEL_1, - TIM_CHANNEL_2 and TIM_CHANNEL_3) */ - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); - - /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ - if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) - { - tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; - if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) - { - __HAL_TIM_ENABLE(htim); - } - } - else - { - __HAL_TIM_ENABLE(htim); - } - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Stops the TIM Hall Sensor Interface in interrupt mode. - * @param htim TIM Hall Sensor Interface handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_IT(TIM_HandleTypeDef *htim) -{ - /* Check the parameters */ - assert_param(IS_TIM_HALL_SENSOR_INTERFACE_INSTANCE(htim->Instance)); - - /* Disable the Input Capture channel 1 - (in the Hall Sensor Interface the three possible channels that can be used are TIM_CHANNEL_1, - TIM_CHANNEL_2 and TIM_CHANNEL_3) */ - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); - - /* Disable the capture compare Interrupts event */ - __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1); - - /* Disable the Peripheral */ - __HAL_TIM_DISABLE(htim); - - /* Set the TIM channels state */ - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Starts the TIM Hall Sensor Interface in DMA mode. - * @param htim TIM Hall Sensor Interface handle - * @param pData The destination Buffer address. - * @param Length The length of data to be transferred from TIM peripheral to memory. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_DMA(TIM_HandleTypeDef *htim, uint32_t *pData, uint16_t Length) -{ - uint32_t tmpsmcr; - HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1); - HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1); - - /* Check the parameters */ - assert_param(IS_TIM_HALL_SENSOR_INTERFACE_INSTANCE(htim->Instance)); - - /* Set the TIM channel state */ - if ((channel_1_state == HAL_TIM_CHANNEL_STATE_BUSY) - || (complementary_channel_1_state == HAL_TIM_CHANNEL_STATE_BUSY)) - { - return HAL_BUSY; - } - else if ((channel_1_state == HAL_TIM_CHANNEL_STATE_READY) - && (complementary_channel_1_state == HAL_TIM_CHANNEL_STATE_READY)) - { - if ((pData == NULL) || (Length == 0U)) - { - return HAL_ERROR; - } - else - { - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); - } - } - else - { - return HAL_ERROR; - } - - /* Enable the Input Capture channel 1 - (in the Hall Sensor Interface the three possible channels that can be used are TIM_CHANNEL_1, - TIM_CHANNEL_2 and TIM_CHANNEL_3) */ - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); - - /* Set the DMA Input Capture 1 Callbacks */ - htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMACaptureCplt; - htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ; - - /* Enable the DMA channel for Capture 1*/ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->CCR1, (uint32_t)pData, Length) != HAL_OK) - { - /* Return error status */ - return HAL_ERROR; - } - /* Enable the capture compare 1 Interrupt */ - __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1); - - /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ - if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) - { - tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; - if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) - { - __HAL_TIM_ENABLE(htim); - } - } - else - { - __HAL_TIM_ENABLE(htim); - } - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Stops the TIM Hall Sensor Interface in DMA mode. - * @param htim TIM Hall Sensor Interface handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_DMA(TIM_HandleTypeDef *htim) -{ - /* Check the parameters */ - assert_param(IS_TIM_HALL_SENSOR_INTERFACE_INSTANCE(htim->Instance)); - - /* Disable the Input Capture channel 1 - (in the Hall Sensor Interface the three possible channels that can be used are TIM_CHANNEL_1, - TIM_CHANNEL_2 and TIM_CHANNEL_3) */ - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); - - - /* Disable the capture compare Interrupts 1 event */ - __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1); - - (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]); - - /* Disable the Peripheral */ - __HAL_TIM_DISABLE(htim); - - /* Set the TIM channel state */ - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); - - /* Return function status */ - return HAL_OK; -} - -/** - * @} - */ - -/** @defgroup TIMEx_Exported_Functions_Group2 Extended Timer Complementary Output Compare functions - * @brief Timer Complementary Output Compare functions - * -@verbatim - ============================================================================== - ##### Timer Complementary Output Compare functions ##### - ============================================================================== - [..] - This section provides functions allowing to: - (+) Start the Complementary Output Compare/PWM. - (+) Stop the Complementary Output Compare/PWM. - (+) Start the Complementary Output Compare/PWM and enable interrupts. - (+) Stop the Complementary Output Compare/PWM and disable interrupts. - (+) Start the Complementary Output Compare/PWM and enable DMA transfers. - (+) Stop the Complementary Output Compare/PWM and disable DMA transfers. - -@endverbatim - * @{ - */ - -/** - * @brief Starts the TIM Output Compare signal generation on the complementary - * output. - * @param htim TIM Output Compare handle - * @param Channel TIM Channel to be enabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIMEx_OCN_Start(TIM_HandleTypeDef *htim, uint32_t Channel) -{ - uint32_t tmpsmcr; - - /* Check the parameters */ - assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); - - /* Check the TIM complementary channel state */ - if (TIM_CHANNEL_N_STATE_GET(htim, Channel) != HAL_TIM_CHANNEL_STATE_READY) - { - return HAL_ERROR; - } - - /* Set the TIM complementary channel state */ - TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); - - /* Enable the Capture compare channel N */ - TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE); - - /* Enable the Main Output */ - __HAL_TIM_MOE_ENABLE(htim); - - /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ - if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) - { - tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; - if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) - { - __HAL_TIM_ENABLE(htim); - } - } - else - { - __HAL_TIM_ENABLE(htim); - } - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Stops the TIM Output Compare signal generation on the complementary - * output. - * @param htim TIM handle - * @param Channel TIM Channel to be disabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIMEx_OCN_Stop(TIM_HandleTypeDef *htim, uint32_t Channel) -{ - /* Check the parameters */ - assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); - - /* Disable the Capture compare channel N */ - TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE); - - /* Disable the Main Output */ - __HAL_TIM_MOE_DISABLE(htim); - - /* Disable the Peripheral */ - __HAL_TIM_DISABLE(htim); - - /* Set the TIM complementary channel state */ - TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Starts the TIM Output Compare signal generation in interrupt mode - * on the complementary output. - * @param htim TIM OC handle - * @param Channel TIM Channel to be enabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIMEx_OCN_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel) -{ - HAL_StatusTypeDef status = HAL_OK; - uint32_t tmpsmcr; - - /* Check the parameters */ - assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); - - /* Check the TIM complementary channel state */ - if (TIM_CHANNEL_N_STATE_GET(htim, Channel) != HAL_TIM_CHANNEL_STATE_READY) - { - return HAL_ERROR; - } - - /* Set the TIM complementary channel state */ - TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); - - switch (Channel) - { - case TIM_CHANNEL_1: - { - /* Enable the TIM Output Compare interrupt */ - __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); - break; - } - - case TIM_CHANNEL_2: - { - /* Enable the TIM Output Compare interrupt */ - __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2); - break; - } - - case TIM_CHANNEL_3: - { - /* Enable the TIM Output Compare interrupt */ - __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC3); - break; - } - - - default: - status = HAL_ERROR; - break; - } - - if (status == HAL_OK) - { - /* Enable the TIM Break interrupt */ - __HAL_TIM_ENABLE_IT(htim, TIM_IT_BREAK); - - /* Enable the Capture compare channel N */ - TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE); - - /* Enable the Main Output */ - __HAL_TIM_MOE_ENABLE(htim); - - /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ - if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) - { - tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; - if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) - { - __HAL_TIM_ENABLE(htim); - } - } - else - { - __HAL_TIM_ENABLE(htim); - } - } - - /* Return function status */ - return status; -} - -/** - * @brief Stops the TIM Output Compare signal generation in interrupt mode - * on the complementary output. - * @param htim TIM Output Compare handle - * @param Channel TIM Channel to be disabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel) -{ - HAL_StatusTypeDef status = HAL_OK; - uint32_t tmpccer; - - /* Check the parameters */ - assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); - - switch (Channel) - { - case TIM_CHANNEL_1: - { - /* Disable the TIM Output Compare interrupt */ - __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1); - break; - } - - case TIM_CHANNEL_2: - { - /* Disable the TIM Output Compare interrupt */ - __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2); - break; - } - - case TIM_CHANNEL_3: - { - /* Disable the TIM Output Compare interrupt */ - __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC3); - break; - } - - default: - status = HAL_ERROR; - break; - } - - if (status == HAL_OK) - { - /* Disable the Capture compare channel N */ - TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE); - - /* Disable the TIM Break interrupt (only if no more channel is active) */ - tmpccer = htim->Instance->CCER; - if ((tmpccer & (TIM_CCER_CC1NE | TIM_CCER_CC2NE | TIM_CCER_CC3NE)) == (uint32_t)RESET) - { - __HAL_TIM_DISABLE_IT(htim, TIM_IT_BREAK); - } - - /* Disable the Main Output */ - __HAL_TIM_MOE_DISABLE(htim); - - /* Disable the Peripheral */ - __HAL_TIM_DISABLE(htim); - - /* Set the TIM complementary channel state */ - TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); - } - - /* Return function status */ - return status; -} - -/** - * @brief Starts the TIM Output Compare signal generation in DMA mode - * on the complementary output. - * @param htim TIM Output Compare handle - * @param Channel TIM Channel to be enabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @param pData The source Buffer address. - * @param Length The length of data to be transferred from memory to TIM peripheral - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIMEx_OCN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, const uint32_t *pData, - uint16_t Length) -{ - HAL_StatusTypeDef status = HAL_OK; - uint32_t tmpsmcr; - - /* Check the parameters */ - assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); - - /* Set the TIM complementary channel state */ - if (TIM_CHANNEL_N_STATE_GET(htim, Channel) == HAL_TIM_CHANNEL_STATE_BUSY) - { - return HAL_BUSY; - } - else if (TIM_CHANNEL_N_STATE_GET(htim, Channel) == HAL_TIM_CHANNEL_STATE_READY) - { - if ((pData == NULL) || (Length == 0U)) - { - return HAL_ERROR; - } - else - { - TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); - } - } - else - { - return HAL_ERROR; - } - - switch (Channel) - { - case TIM_CHANNEL_1: - { - /* Set the DMA compare callbacks */ - htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMADelayPulseNCplt; - htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAErrorCCxN ; - - /* Enable the DMA channel */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)pData, (uint32_t)&htim->Instance->CCR1, - Length) != HAL_OK) - { - /* Return error status */ - return HAL_ERROR; - } - /* Enable the TIM Output Compare DMA request */ - __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1); - break; - } - - case TIM_CHANNEL_2: - { - /* Set the DMA compare callbacks */ - htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMADelayPulseNCplt; - htim->hdma[TIM_DMA_ID_CC2]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAErrorCCxN ; - - /* Enable the DMA channel */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)pData, (uint32_t)&htim->Instance->CCR2, - Length) != HAL_OK) - { - /* Return error status */ - return HAL_ERROR; - } - /* Enable the TIM Output Compare DMA request */ - __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2); - break; - } - - case TIM_CHANNEL_3: - { - /* Set the DMA compare callbacks */ - htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMADelayPulseNCplt; - htim->hdma[TIM_DMA_ID_CC3]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAErrorCCxN ; - - /* Enable the DMA channel */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)pData, (uint32_t)&htim->Instance->CCR3, - Length) != HAL_OK) - { - /* Return error status */ - return HAL_ERROR; - } - /* Enable the TIM Output Compare DMA request */ - __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC3); - break; - } - - default: - status = HAL_ERROR; - break; - } - - if (status == HAL_OK) - { - /* Enable the Capture compare channel N */ - TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE); - - /* Enable the Main Output */ - __HAL_TIM_MOE_ENABLE(htim); - - /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ - if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) - { - tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; - if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) - { - __HAL_TIM_ENABLE(htim); - } - } - else - { - __HAL_TIM_ENABLE(htim); - } - } - - /* Return function status */ - return status; -} - -/** - * @brief Stops the TIM Output Compare signal generation in DMA mode - * on the complementary output. - * @param htim TIM Output Compare handle - * @param Channel TIM Channel to be disabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Check the parameters */ - assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); - - switch (Channel) - { - case TIM_CHANNEL_1: - { - /* Disable the TIM Output Compare DMA request */ - __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1); - (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]); - break; - } - - case TIM_CHANNEL_2: - { - /* Disable the TIM Output Compare DMA request */ - __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2); - (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC2]); - break; - } - - case TIM_CHANNEL_3: - { - /* Disable the TIM Output Compare DMA request */ - __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC3); - (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC3]); - break; - } - - default: - status = HAL_ERROR; - break; - } - - if (status == HAL_OK) - { - /* Disable the Capture compare channel N */ - TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE); - - /* Disable the Main Output */ - __HAL_TIM_MOE_DISABLE(htim); - - /* Disable the Peripheral */ - __HAL_TIM_DISABLE(htim); - - /* Set the TIM complementary channel state */ - TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); - } - - /* Return function status */ - return status; -} - -/** - * @} - */ - -/** @defgroup TIMEx_Exported_Functions_Group3 Extended Timer Complementary PWM functions - * @brief Timer Complementary PWM functions - * -@verbatim - ============================================================================== - ##### Timer Complementary PWM functions ##### - ============================================================================== - [..] - This section provides functions allowing to: - (+) Start the Complementary PWM. - (+) Stop the Complementary PWM. - (+) Start the Complementary PWM and enable interrupts. - (+) Stop the Complementary PWM and disable interrupts. - (+) Start the Complementary PWM and enable DMA transfers. - (+) Stop the Complementary PWM and disable DMA transfers. - (+) Start the Complementary Input Capture measurement. - (+) Stop the Complementary Input Capture. - (+) Start the Complementary Input Capture and enable interrupts. - (+) Stop the Complementary Input Capture and disable interrupts. - (+) Start the Complementary Input Capture and enable DMA transfers. - (+) Stop the Complementary Input Capture and disable DMA transfers. - (+) Start the Complementary One Pulse generation. - (+) Stop the Complementary One Pulse. - (+) Start the Complementary One Pulse and enable interrupts. - (+) Stop the Complementary One Pulse and disable interrupts. - -@endverbatim - * @{ - */ - -/** - * @brief Starts the PWM signal generation on the complementary output. - * @param htim TIM handle - * @param Channel TIM Channel to be enabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIMEx_PWMN_Start(TIM_HandleTypeDef *htim, uint32_t Channel) -{ - uint32_t tmpsmcr; - - /* Check the parameters */ - assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); - - /* Check the TIM complementary channel state */ - if (TIM_CHANNEL_N_STATE_GET(htim, Channel) != HAL_TIM_CHANNEL_STATE_READY) - { - return HAL_ERROR; - } - - /* Set the TIM complementary channel state */ - TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); - - /* Enable the complementary PWM output */ - TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE); - - /* Enable the Main Output */ - __HAL_TIM_MOE_ENABLE(htim); - - /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ - if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) - { - tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; - if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) - { - __HAL_TIM_ENABLE(htim); - } - } - else - { - __HAL_TIM_ENABLE(htim); - } - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Stops the PWM signal generation on the complementary output. - * @param htim TIM handle - * @param Channel TIM Channel to be disabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop(TIM_HandleTypeDef *htim, uint32_t Channel) -{ - /* Check the parameters */ - assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); - - /* Disable the complementary PWM output */ - TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE); - - /* Disable the Main Output */ - __HAL_TIM_MOE_DISABLE(htim); - - /* Disable the Peripheral */ - __HAL_TIM_DISABLE(htim); - - /* Set the TIM complementary channel state */ - TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Starts the PWM signal generation in interrupt mode on the - * complementary output. - * @param htim TIM handle - * @param Channel TIM Channel to be disabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel) -{ - HAL_StatusTypeDef status = HAL_OK; - uint32_t tmpsmcr; - - /* Check the parameters */ - assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); - - /* Check the TIM complementary channel state */ - if (TIM_CHANNEL_N_STATE_GET(htim, Channel) != HAL_TIM_CHANNEL_STATE_READY) - { - return HAL_ERROR; - } - - /* Set the TIM complementary channel state */ - TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); - - switch (Channel) - { - case TIM_CHANNEL_1: - { - /* Enable the TIM Capture/Compare 1 interrupt */ - __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); - break; - } - - case TIM_CHANNEL_2: - { - /* Enable the TIM Capture/Compare 2 interrupt */ - __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2); - break; - } - - case TIM_CHANNEL_3: - { - /* Enable the TIM Capture/Compare 3 interrupt */ - __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC3); - break; - } - - default: - status = HAL_ERROR; - break; - } - - if (status == HAL_OK) - { - /* Enable the TIM Break interrupt */ - __HAL_TIM_ENABLE_IT(htim, TIM_IT_BREAK); - - /* Enable the complementary PWM output */ - TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE); - - /* Enable the Main Output */ - __HAL_TIM_MOE_ENABLE(htim); - - /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ - if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) - { - tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; - if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) - { - __HAL_TIM_ENABLE(htim); - } - } - else - { - __HAL_TIM_ENABLE(htim); - } - } - - /* Return function status */ - return status; -} - -/** - * @brief Stops the PWM signal generation in interrupt mode on the - * complementary output. - * @param htim TIM handle - * @param Channel TIM Channel to be disabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel) -{ - HAL_StatusTypeDef status = HAL_OK; - uint32_t tmpccer; - - /* Check the parameters */ - assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); - - switch (Channel) - { - case TIM_CHANNEL_1: - { - /* Disable the TIM Capture/Compare 1 interrupt */ - __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1); - break; - } - - case TIM_CHANNEL_2: - { - /* Disable the TIM Capture/Compare 2 interrupt */ - __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2); - break; - } - - case TIM_CHANNEL_3: - { - /* Disable the TIM Capture/Compare 3 interrupt */ - __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC3); - break; - } - - default: - status = HAL_ERROR; - break; - } - - if (status == HAL_OK) - { - /* Disable the complementary PWM output */ - TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE); - - /* Disable the TIM Break interrupt (only if no more channel is active) */ - tmpccer = htim->Instance->CCER; - if ((tmpccer & (TIM_CCER_CC1NE | TIM_CCER_CC2NE | TIM_CCER_CC3NE)) == (uint32_t)RESET) - { - __HAL_TIM_DISABLE_IT(htim, TIM_IT_BREAK); - } - - /* Disable the Main Output */ - __HAL_TIM_MOE_DISABLE(htim); - - /* Disable the Peripheral */ - __HAL_TIM_DISABLE(htim); - - /* Set the TIM complementary channel state */ - TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); - } - - /* Return function status */ - return status; -} - -/** - * @brief Starts the TIM PWM signal generation in DMA mode on the - * complementary output - * @param htim TIM handle - * @param Channel TIM Channel to be enabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @param pData The source Buffer address. - * @param Length The length of data to be transferred from memory to TIM peripheral - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, const uint32_t *pData, - uint16_t Length) -{ - HAL_StatusTypeDef status = HAL_OK; - uint32_t tmpsmcr; - - /* Check the parameters */ - assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); - - /* Set the TIM complementary channel state */ - if (TIM_CHANNEL_N_STATE_GET(htim, Channel) == HAL_TIM_CHANNEL_STATE_BUSY) - { - return HAL_BUSY; - } - else if (TIM_CHANNEL_N_STATE_GET(htim, Channel) == HAL_TIM_CHANNEL_STATE_READY) - { - if ((pData == NULL) || (Length == 0U)) - { - return HAL_ERROR; - } - else - { - TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); - } - } - else - { - return HAL_ERROR; - } - - switch (Channel) - { - case TIM_CHANNEL_1: - { - /* Set the DMA compare callbacks */ - htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMADelayPulseNCplt; - htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAErrorCCxN ; - - /* Enable the DMA channel */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)pData, (uint32_t)&htim->Instance->CCR1, - Length) != HAL_OK) - { - /* Return error status */ - return HAL_ERROR; - } - /* Enable the TIM Capture/Compare 1 DMA request */ - __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1); - break; - } - - case TIM_CHANNEL_2: - { - /* Set the DMA compare callbacks */ - htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMADelayPulseNCplt; - htim->hdma[TIM_DMA_ID_CC2]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAErrorCCxN ; - - /* Enable the DMA channel */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)pData, (uint32_t)&htim->Instance->CCR2, - Length) != HAL_OK) - { - /* Return error status */ - return HAL_ERROR; - } - /* Enable the TIM Capture/Compare 2 DMA request */ - __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2); - break; - } - - case TIM_CHANNEL_3: - { - /* Set the DMA compare callbacks */ - htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMADelayPulseNCplt; - htim->hdma[TIM_DMA_ID_CC3]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAErrorCCxN ; - - /* Enable the DMA channel */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)pData, (uint32_t)&htim->Instance->CCR3, - Length) != HAL_OK) - { - /* Return error status */ - return HAL_ERROR; - } - /* Enable the TIM Capture/Compare 3 DMA request */ - __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC3); - break; - } - - default: - status = HAL_ERROR; - break; - } - - if (status == HAL_OK) - { - /* Enable the complementary PWM output */ - TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE); - - /* Enable the Main Output */ - __HAL_TIM_MOE_ENABLE(htim); - - /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ - if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) - { - tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; - if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) - { - __HAL_TIM_ENABLE(htim); - } - } - else - { - __HAL_TIM_ENABLE(htim); - } - } - - /* Return function status */ - return status; -} - -/** - * @brief Stops the TIM PWM signal generation in DMA mode on the complementary - * output - * @param htim TIM handle - * @param Channel TIM Channel to be disabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Check the parameters */ - assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); - - switch (Channel) - { - case TIM_CHANNEL_1: - { - /* Disable the TIM Capture/Compare 1 DMA request */ - __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1); - (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]); - break; - } - - case TIM_CHANNEL_2: - { - /* Disable the TIM Capture/Compare 2 DMA request */ - __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2); - (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC2]); - break; - } - - case TIM_CHANNEL_3: - { - /* Disable the TIM Capture/Compare 3 DMA request */ - __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC3); - (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC3]); - break; - } - - default: - status = HAL_ERROR; - break; - } - - if (status == HAL_OK) - { - /* Disable the complementary PWM output */ - TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE); - - /* Disable the Main Output */ - __HAL_TIM_MOE_DISABLE(htim); - - /* Disable the Peripheral */ - __HAL_TIM_DISABLE(htim); - - /* Set the TIM complementary channel state */ - TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); - } - - /* Return function status */ - return status; -} - -/** - * @} - */ - -/** @defgroup TIMEx_Exported_Functions_Group4 Extended Timer Complementary One Pulse functions - * @brief Timer Complementary One Pulse functions - * -@verbatim - ============================================================================== - ##### Timer Complementary One Pulse functions ##### - ============================================================================== - [..] - This section provides functions allowing to: - (+) Start the Complementary One Pulse generation. - (+) Stop the Complementary One Pulse. - (+) Start the Complementary One Pulse and enable interrupts. - (+) Stop the Complementary One Pulse and disable interrupts. - -@endverbatim - * @{ - */ - -/** - * @brief Starts the TIM One Pulse signal generation on the complementary - * output. - * @note OutputChannel must match the pulse output channel chosen when calling - * @ref HAL_TIM_OnePulse_ConfigChannel(). - * @param htim TIM One Pulse handle - * @param OutputChannel pulse output channel to enable - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start(TIM_HandleTypeDef *htim, uint32_t OutputChannel) -{ - uint32_t input_channel = (OutputChannel == TIM_CHANNEL_1) ? TIM_CHANNEL_2 : TIM_CHANNEL_1; - HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1); - HAL_TIM_ChannelStateTypeDef channel_2_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_2); - HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1); - HAL_TIM_ChannelStateTypeDef complementary_channel_2_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_2); - - /* Check the parameters */ - assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, OutputChannel)); - - /* Check the TIM channels state */ - if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY) - || (channel_2_state != HAL_TIM_CHANNEL_STATE_READY) - || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY) - || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY)) - { - return HAL_ERROR; - } - - /* Set the TIM channels state */ - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); - - /* Enable the complementary One Pulse output channel and the Input Capture channel */ - TIM_CCxNChannelCmd(htim->Instance, OutputChannel, TIM_CCxN_ENABLE); - TIM_CCxChannelCmd(htim->Instance, input_channel, TIM_CCx_ENABLE); - - /* Enable the Main Output */ - __HAL_TIM_MOE_ENABLE(htim); - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Stops the TIM One Pulse signal generation on the complementary - * output. - * @note OutputChannel must match the pulse output channel chosen when calling - * @ref HAL_TIM_OnePulse_ConfigChannel(). - * @param htim TIM One Pulse handle - * @param OutputChannel pulse output channel to disable - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop(TIM_HandleTypeDef *htim, uint32_t OutputChannel) -{ - uint32_t input_channel = (OutputChannel == TIM_CHANNEL_1) ? TIM_CHANNEL_2 : TIM_CHANNEL_1; - - /* Check the parameters */ - assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, OutputChannel)); - - /* Disable the complementary One Pulse output channel and the Input Capture channel */ - TIM_CCxNChannelCmd(htim->Instance, OutputChannel, TIM_CCxN_DISABLE); - TIM_CCxChannelCmd(htim->Instance, input_channel, TIM_CCx_DISABLE); - - /* Disable the Main Output */ - __HAL_TIM_MOE_DISABLE(htim); - - /* Disable the Peripheral */ - __HAL_TIM_DISABLE(htim); - - /* Set the TIM channels state */ - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Starts the TIM One Pulse signal generation in interrupt mode on the - * complementary channel. - * @note OutputChannel must match the pulse output channel chosen when calling - * @ref HAL_TIM_OnePulse_ConfigChannel(). - * @param htim TIM One Pulse handle - * @param OutputChannel pulse output channel to enable - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel) -{ - uint32_t input_channel = (OutputChannel == TIM_CHANNEL_1) ? TIM_CHANNEL_2 : TIM_CHANNEL_1; - HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1); - HAL_TIM_ChannelStateTypeDef channel_2_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_2); - HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1); - HAL_TIM_ChannelStateTypeDef complementary_channel_2_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_2); - - /* Check the parameters */ - assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, OutputChannel)); - - /* Check the TIM channels state */ - if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY) - || (channel_2_state != HAL_TIM_CHANNEL_STATE_READY) - || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY) - || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY)) - { - return HAL_ERROR; - } - - /* Set the TIM channels state */ - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); - - /* Enable the TIM Capture/Compare 1 interrupt */ - __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); - - /* Enable the TIM Capture/Compare 2 interrupt */ - __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2); - - /* Enable the complementary One Pulse output channel and the Input Capture channel */ - TIM_CCxNChannelCmd(htim->Instance, OutputChannel, TIM_CCxN_ENABLE); - TIM_CCxChannelCmd(htim->Instance, input_channel, TIM_CCx_ENABLE); - - /* Enable the Main Output */ - __HAL_TIM_MOE_ENABLE(htim); - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Stops the TIM One Pulse signal generation in interrupt mode on the - * complementary channel. - * @note OutputChannel must match the pulse output channel chosen when calling - * @ref HAL_TIM_OnePulse_ConfigChannel(). - * @param htim TIM One Pulse handle - * @param OutputChannel pulse output channel to disable - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel) -{ - uint32_t input_channel = (OutputChannel == TIM_CHANNEL_1) ? TIM_CHANNEL_2 : TIM_CHANNEL_1; - - /* Check the parameters */ - assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, OutputChannel)); - - /* Disable the TIM Capture/Compare 1 interrupt */ - __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1); - - /* Disable the TIM Capture/Compare 2 interrupt */ - __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2); - - /* Disable the complementary One Pulse output channel and the Input Capture channel */ - TIM_CCxNChannelCmd(htim->Instance, OutputChannel, TIM_CCxN_DISABLE); - TIM_CCxChannelCmd(htim->Instance, input_channel, TIM_CCx_DISABLE); - - /* Disable the Main Output */ - __HAL_TIM_MOE_DISABLE(htim); - - /* Disable the Peripheral */ - __HAL_TIM_DISABLE(htim); - - /* Set the TIM channels state */ - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); - - /* Return function status */ - return HAL_OK; -} - -/** - * @} - */ - -/** @defgroup TIMEx_Exported_Functions_Group5 Extended Peripheral Control functions - * @brief Peripheral Control functions - * -@verbatim - ============================================================================== - ##### Peripheral Control functions ##### - ============================================================================== - [..] - This section provides functions allowing to: - (+) Configure the commutation event in case of use of the Hall sensor interface. - (+) Configure Output channels for OC and PWM mode. - - (+) Configure Complementary channels, break features and dead time. - (+) Configure Master synchronization. - (+) Configure timer remapping capabilities. - (+) Enable or disable channel grouping. - -@endverbatim - * @{ - */ - -/** - * @brief Configure the TIM commutation event sequence. - * @note This function is mandatory to use the commutation event in order to - * update the configuration at each commutation detection on the TRGI input of the Timer, - * the typical use of this feature is with the use of another Timer(interface Timer) - * configured in Hall sensor interface, this interface Timer will generate the - * commutation at its TRGO output (connected to Timer used in this function) each time - * the TI1 of the Interface Timer detect a commutation at its input TI1. - * @param htim TIM handle - * @param InputTrigger the Internal trigger corresponding to the Timer Interfacing with the Hall sensor - * This parameter can be one of the following values: - * @arg TIM_TS_ITR0: Internal trigger 0 selected - * @arg TIM_TS_ITR1: Internal trigger 1 selected - * @arg TIM_TS_ITR2: Internal trigger 2 selected - * @arg TIM_TS_ITR3: Internal trigger 3 selected - * @arg TIM_TS_NONE: No trigger is needed - * @param CommutationSource the Commutation Event source - * This parameter can be one of the following values: - * @arg TIM_COMMUTATION_TRGI: Commutation source is the TRGI of the Interface Timer - * @arg TIM_COMMUTATION_SOFTWARE: Commutation source is set by software using the COMG bit - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIMEx_ConfigCommutEvent(TIM_HandleTypeDef *htim, uint32_t InputTrigger, - uint32_t CommutationSource) -{ - /* Check the parameters */ - assert_param(IS_TIM_COMMUTATION_EVENT_INSTANCE(htim->Instance)); - assert_param(IS_TIM_INTERNAL_TRIGGEREVENT_SELECTION(InputTrigger)); - - __HAL_LOCK(htim); - - if ((InputTrigger == TIM_TS_ITR0) || (InputTrigger == TIM_TS_ITR1) || - (InputTrigger == TIM_TS_ITR2) || (InputTrigger == TIM_TS_ITR3)) - { - /* Select the Input trigger */ - htim->Instance->SMCR &= ~TIM_SMCR_TS; - htim->Instance->SMCR |= InputTrigger; - } - - /* Select the Capture Compare preload feature */ - htim->Instance->CR2 |= TIM_CR2_CCPC; - /* Select the Commutation event source */ - htim->Instance->CR2 &= ~TIM_CR2_CCUS; - htim->Instance->CR2 |= CommutationSource; - - /* Disable Commutation Interrupt */ - __HAL_TIM_DISABLE_IT(htim, TIM_IT_COM); - - /* Disable Commutation DMA request */ - __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_COM); - - __HAL_UNLOCK(htim); - - return HAL_OK; -} - -/** - * @brief Configure the TIM commutation event sequence with interrupt. - * @note This function is mandatory to use the commutation event in order to - * update the configuration at each commutation detection on the TRGI input of the Timer, - * the typical use of this feature is with the use of another Timer(interface Timer) - * configured in Hall sensor interface, this interface Timer will generate the - * commutation at its TRGO output (connected to Timer used in this function) each time - * the TI1 of the Interface Timer detect a commutation at its input TI1. - * @param htim TIM handle - * @param InputTrigger the Internal trigger corresponding to the Timer Interfacing with the Hall sensor - * This parameter can be one of the following values: - * @arg TIM_TS_ITR0: Internal trigger 0 selected - * @arg TIM_TS_ITR1: Internal trigger 1 selected - * @arg TIM_TS_ITR2: Internal trigger 2 selected - * @arg TIM_TS_ITR3: Internal trigger 3 selected - * @arg TIM_TS_NONE: No trigger is needed - * @param CommutationSource the Commutation Event source - * This parameter can be one of the following values: - * @arg TIM_COMMUTATION_TRGI: Commutation source is the TRGI of the Interface Timer - * @arg TIM_COMMUTATION_SOFTWARE: Commutation source is set by software using the COMG bit - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIMEx_ConfigCommutEvent_IT(TIM_HandleTypeDef *htim, uint32_t InputTrigger, - uint32_t CommutationSource) -{ - /* Check the parameters */ - assert_param(IS_TIM_COMMUTATION_EVENT_INSTANCE(htim->Instance)); - assert_param(IS_TIM_INTERNAL_TRIGGEREVENT_SELECTION(InputTrigger)); - - __HAL_LOCK(htim); - - if ((InputTrigger == TIM_TS_ITR0) || (InputTrigger == TIM_TS_ITR1) || - (InputTrigger == TIM_TS_ITR2) || (InputTrigger == TIM_TS_ITR3)) - { - /* Select the Input trigger */ - htim->Instance->SMCR &= ~TIM_SMCR_TS; - htim->Instance->SMCR |= InputTrigger; - } - - /* Select the Capture Compare preload feature */ - htim->Instance->CR2 |= TIM_CR2_CCPC; - /* Select the Commutation event source */ - htim->Instance->CR2 &= ~TIM_CR2_CCUS; - htim->Instance->CR2 |= CommutationSource; - - /* Disable Commutation DMA request */ - __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_COM); - - /* Enable the Commutation Interrupt */ - __HAL_TIM_ENABLE_IT(htim, TIM_IT_COM); - - __HAL_UNLOCK(htim); - - return HAL_OK; -} - -/** - * @brief Configure the TIM commutation event sequence with DMA. - * @note This function is mandatory to use the commutation event in order to - * update the configuration at each commutation detection on the TRGI input of the Timer, - * the typical use of this feature is with the use of another Timer(interface Timer) - * configured in Hall sensor interface, this interface Timer will generate the - * commutation at its TRGO output (connected to Timer used in this function) each time - * the TI1 of the Interface Timer detect a commutation at its input TI1. - * @note The user should configure the DMA in his own software, in This function only the COMDE bit is set - * @param htim TIM handle - * @param InputTrigger the Internal trigger corresponding to the Timer Interfacing with the Hall sensor - * This parameter can be one of the following values: - * @arg TIM_TS_ITR0: Internal trigger 0 selected - * @arg TIM_TS_ITR1: Internal trigger 1 selected - * @arg TIM_TS_ITR2: Internal trigger 2 selected - * @arg TIM_TS_ITR3: Internal trigger 3 selected - * @arg TIM_TS_NONE: No trigger is needed - * @param CommutationSource the Commutation Event source - * This parameter can be one of the following values: - * @arg TIM_COMMUTATION_TRGI: Commutation source is the TRGI of the Interface Timer - * @arg TIM_COMMUTATION_SOFTWARE: Commutation source is set by software using the COMG bit - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIMEx_ConfigCommutEvent_DMA(TIM_HandleTypeDef *htim, uint32_t InputTrigger, - uint32_t CommutationSource) -{ - /* Check the parameters */ - assert_param(IS_TIM_COMMUTATION_EVENT_INSTANCE(htim->Instance)); - assert_param(IS_TIM_INTERNAL_TRIGGEREVENT_SELECTION(InputTrigger)); - - __HAL_LOCK(htim); - - if ((InputTrigger == TIM_TS_ITR0) || (InputTrigger == TIM_TS_ITR1) || - (InputTrigger == TIM_TS_ITR2) || (InputTrigger == TIM_TS_ITR3)) - { - /* Select the Input trigger */ - htim->Instance->SMCR &= ~TIM_SMCR_TS; - htim->Instance->SMCR |= InputTrigger; - } - - /* Select the Capture Compare preload feature */ - htim->Instance->CR2 |= TIM_CR2_CCPC; - /* Select the Commutation event source */ - htim->Instance->CR2 &= ~TIM_CR2_CCUS; - htim->Instance->CR2 |= CommutationSource; - - /* Enable the Commutation DMA Request */ - /* Set the DMA Commutation Callback */ - htim->hdma[TIM_DMA_ID_COMMUTATION]->XferCpltCallback = TIMEx_DMACommutationCplt; - htim->hdma[TIM_DMA_ID_COMMUTATION]->XferHalfCpltCallback = TIMEx_DMACommutationHalfCplt; - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_COMMUTATION]->XferErrorCallback = TIM_DMAError; - - /* Disable Commutation Interrupt */ - __HAL_TIM_DISABLE_IT(htim, TIM_IT_COM); - - /* Enable the Commutation DMA Request */ - __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_COM); - - __HAL_UNLOCK(htim); - - return HAL_OK; -} - -/** - * @brief Configures the TIM in master mode. - * @param htim TIM handle. - * @param sMasterConfig pointer to a TIM_MasterConfigTypeDef structure that - * contains the selected trigger output (TRGO) and the Master/Slave - * mode. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIMEx_MasterConfigSynchronization(TIM_HandleTypeDef *htim, - const TIM_MasterConfigTypeDef *sMasterConfig) -{ - uint32_t tmpcr2; - uint32_t tmpsmcr; - - /* Check the parameters */ - assert_param(IS_TIM_MASTER_INSTANCE(htim->Instance)); - assert_param(IS_TIM_TRGO_SOURCE(sMasterConfig->MasterOutputTrigger)); - assert_param(IS_TIM_MSM_STATE(sMasterConfig->MasterSlaveMode)); - - /* Check input state */ - __HAL_LOCK(htim); - - /* Change the handler state */ - htim->State = HAL_TIM_STATE_BUSY; - - /* Get the TIMx CR2 register value */ - tmpcr2 = htim->Instance->CR2; - - /* Get the TIMx SMCR register value */ - tmpsmcr = htim->Instance->SMCR; - - /* If the timer supports ADC synchronization through TRGO2, set the master mode selection 2 */ - if (IS_TIM_TRGO2_INSTANCE(htim->Instance)) - { - /* Check the parameters */ - assert_param(IS_TIM_TRGO2_SOURCE(sMasterConfig->MasterOutputTrigger2)); - - /* Clear the MMS2 bits */ - tmpcr2 &= ~TIM_CR2_MMS2; - /* Select the TRGO2 source*/ - tmpcr2 |= sMasterConfig->MasterOutputTrigger2; - } - - /* Reset the MMS Bits */ - tmpcr2 &= ~TIM_CR2_MMS; - /* Select the TRGO source */ - tmpcr2 |= sMasterConfig->MasterOutputTrigger; - - /* Update TIMx CR2 */ - htim->Instance->CR2 = tmpcr2; - - if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) - { - /* Reset the MSM Bit */ - tmpsmcr &= ~TIM_SMCR_MSM; - /* Set master mode */ - tmpsmcr |= sMasterConfig->MasterSlaveMode; - - /* Update TIMx SMCR */ - htim->Instance->SMCR = tmpsmcr; - } - - /* Change the htim state */ - htim->State = HAL_TIM_STATE_READY; - - __HAL_UNLOCK(htim); - - return HAL_OK; -} - -/** - * @brief Configures the Break feature, dead time, Lock level, OSSI/OSSR State - * and the AOE(automatic output enable). - * @param htim TIM handle - * @param sBreakDeadTimeConfig pointer to a TIM_ConfigBreakDeadConfigTypeDef structure that - * contains the BDTR Register configuration information for the TIM peripheral. - * @note Interrupts can be generated when an active level is detected on the - * break input, the break 2 input or the system break input. Break - * interrupt can be enabled by calling the @ref __HAL_TIM_ENABLE_IT macro. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIMEx_ConfigBreakDeadTime(TIM_HandleTypeDef *htim, - const TIM_BreakDeadTimeConfigTypeDef *sBreakDeadTimeConfig) -{ - /* Keep this variable initialized to 0 as it is used to configure BDTR register */ - uint32_t tmpbdtr = 0U; - - /* Check the parameters */ - assert_param(IS_TIM_BREAK_INSTANCE(htim->Instance)); - assert_param(IS_TIM_OSSR_STATE(sBreakDeadTimeConfig->OffStateRunMode)); - assert_param(IS_TIM_OSSI_STATE(sBreakDeadTimeConfig->OffStateIDLEMode)); - assert_param(IS_TIM_LOCK_LEVEL(sBreakDeadTimeConfig->LockLevel)); - assert_param(IS_TIM_DEADTIME(sBreakDeadTimeConfig->DeadTime)); - assert_param(IS_TIM_BREAK_STATE(sBreakDeadTimeConfig->BreakState)); - assert_param(IS_TIM_BREAK_POLARITY(sBreakDeadTimeConfig->BreakPolarity)); - assert_param(IS_TIM_BREAK_FILTER(sBreakDeadTimeConfig->BreakFilter)); - assert_param(IS_TIM_AUTOMATIC_OUTPUT_STATE(sBreakDeadTimeConfig->AutomaticOutput)); - - /* Check input state */ - __HAL_LOCK(htim); - - /* Set the Lock level, the Break enable Bit and the Polarity, the OSSR State, - the OSSI State, the dead time value and the Automatic Output Enable Bit */ - - /* Set the BDTR bits */ - MODIFY_REG(tmpbdtr, TIM_BDTR_DTG, sBreakDeadTimeConfig->DeadTime); - MODIFY_REG(tmpbdtr, TIM_BDTR_LOCK, sBreakDeadTimeConfig->LockLevel); - MODIFY_REG(tmpbdtr, TIM_BDTR_OSSI, sBreakDeadTimeConfig->OffStateIDLEMode); - MODIFY_REG(tmpbdtr, TIM_BDTR_OSSR, sBreakDeadTimeConfig->OffStateRunMode); - MODIFY_REG(tmpbdtr, TIM_BDTR_BKE, sBreakDeadTimeConfig->BreakState); - MODIFY_REG(tmpbdtr, TIM_BDTR_BKP, sBreakDeadTimeConfig->BreakPolarity); - MODIFY_REG(tmpbdtr, TIM_BDTR_AOE, sBreakDeadTimeConfig->AutomaticOutput); - MODIFY_REG(tmpbdtr, TIM_BDTR_BKF, (sBreakDeadTimeConfig->BreakFilter << TIM_BDTR_BKF_Pos)); - - if (IS_TIM_BKIN2_INSTANCE(htim->Instance)) - { - /* Check the parameters */ - assert_param(IS_TIM_BREAK2_STATE(sBreakDeadTimeConfig->Break2State)); - assert_param(IS_TIM_BREAK2_POLARITY(sBreakDeadTimeConfig->Break2Polarity)); - assert_param(IS_TIM_BREAK_FILTER(sBreakDeadTimeConfig->Break2Filter)); - - /* Set the BREAK2 input related BDTR bits */ - MODIFY_REG(tmpbdtr, TIM_BDTR_BK2F, (sBreakDeadTimeConfig->Break2Filter << TIM_BDTR_BK2F_Pos)); - MODIFY_REG(tmpbdtr, TIM_BDTR_BK2E, sBreakDeadTimeConfig->Break2State); - MODIFY_REG(tmpbdtr, TIM_BDTR_BK2P, sBreakDeadTimeConfig->Break2Polarity); - } - - /* Set TIMx_BDTR */ - htim->Instance->BDTR = tmpbdtr; - - __HAL_UNLOCK(htim); - - return HAL_OK; -} - -/** - * @brief Configures the break input source. - * @param htim TIM handle. - * @param BreakInput Break input to configure - * This parameter can be one of the following values: - * @arg TIM_BREAKINPUT_BRK: Timer break input - * @arg TIM_BREAKINPUT_BRK2: Timer break 2 input - * @param sBreakInputConfig Break input source configuration - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIMEx_ConfigBreakInput(TIM_HandleTypeDef *htim, - uint32_t BreakInput, - const TIMEx_BreakInputConfigTypeDef *sBreakInputConfig) - -{ - HAL_StatusTypeDef status = HAL_OK; - uint32_t tmporx; - uint32_t bkin_enable_mask; - uint32_t bkin_polarity_mask; - uint32_t bkin_enable_bitpos; - uint32_t bkin_polarity_bitpos; - - /* Check the parameters */ - assert_param(IS_TIM_BREAK_INSTANCE(htim->Instance)); - assert_param(IS_TIM_BREAKINPUT(BreakInput)); - assert_param(IS_TIM_BREAKINPUTSOURCE(sBreakInputConfig->Source)); - assert_param(IS_TIM_BREAKINPUTSOURCE_STATE(sBreakInputConfig->Enable)); -#if defined(DFSDM1_Channel0) - if (sBreakInputConfig->Source != TIM_BREAKINPUTSOURCE_DFSDM1) - { - assert_param(IS_TIM_BREAKINPUTSOURCE_POLARITY(sBreakInputConfig->Polarity)); - } -#else - assert_param(IS_TIM_BREAKINPUTSOURCE_POLARITY(sBreakInputConfig->Polarity)); -#endif /* DFSDM1_Channel0 */ - - /* Check input state */ - __HAL_LOCK(htim); - - switch (sBreakInputConfig->Source) - { - case TIM_BREAKINPUTSOURCE_BKIN: - { - bkin_enable_mask = TIM1_OR2_BKINE; - bkin_enable_bitpos = TIM1_OR2_BKINE_Pos; - bkin_polarity_mask = TIM1_OR2_BKINP; - bkin_polarity_bitpos = TIM1_OR2_BKINP_Pos; - break; - } - case TIM_BREAKINPUTSOURCE_COMP1: - { - bkin_enable_mask = TIM1_OR2_BKCMP1E; - bkin_enable_bitpos = TIM1_OR2_BKCMP1E_Pos; - bkin_polarity_mask = TIM1_OR2_BKCMP1P; - bkin_polarity_bitpos = TIM1_OR2_BKCMP1P_Pos; - break; - } - case TIM_BREAKINPUTSOURCE_COMP2: - { - bkin_enable_mask = TIM1_OR2_BKCMP2E; - bkin_enable_bitpos = TIM1_OR2_BKCMP2E_Pos; - bkin_polarity_mask = TIM1_OR2_BKCMP2P; - bkin_polarity_bitpos = TIM1_OR2_BKCMP2P_Pos; - break; - } -#if defined(DFSDM1_Channel0) - case TIM_BREAKINPUTSOURCE_DFSDM1: - { - bkin_enable_mask = TIM1_OR2_BKDF1BK0E; - bkin_enable_bitpos = TIM1_OR2_BKDF1BK0E_Pos; - bkin_polarity_mask = 0U; - bkin_polarity_bitpos = 0U; - break; - } -#endif /* DFSDM1_Channel0 */ - - default: - { - bkin_enable_mask = 0U; - bkin_polarity_mask = 0U; - bkin_enable_bitpos = 0U; - bkin_polarity_bitpos = 0U; - break; - } - } - - switch (BreakInput) - { - case TIM_BREAKINPUT_BRK: - { - /* Get the TIMx_OR2 register value */ - tmporx = htim->Instance->OR2; - - /* Enable the break input */ - tmporx &= ~bkin_enable_mask; - tmporx |= (sBreakInputConfig->Enable << bkin_enable_bitpos) & bkin_enable_mask; - - /* Set the break input polarity */ -#if defined(DFSDM1_Channel0) - if (sBreakInputConfig->Source != TIM_BREAKINPUTSOURCE_DFSDM1) -#endif /* DFSDM1_Channel0 */ - { - tmporx &= ~bkin_polarity_mask; - tmporx |= (sBreakInputConfig->Polarity << bkin_polarity_bitpos) & bkin_polarity_mask; - } - - /* Set TIMx_OR2 */ - htim->Instance->OR2 = tmporx; - break; - } - case TIM_BREAKINPUT_BRK2: - { - /* Get the TIMx_OR3 register value */ - tmporx = htim->Instance->OR3; - - /* Enable the break input */ - tmporx &= ~bkin_enable_mask; - tmporx |= (sBreakInputConfig->Enable << bkin_enable_bitpos) & bkin_enable_mask; - - /* Set the break input polarity */ -#if defined(DFSDM1_Channel0) - if (sBreakInputConfig->Source != TIM_BREAKINPUTSOURCE_DFSDM1) -#endif /* DFSDM1_Channel0 */ - { - tmporx &= ~bkin_polarity_mask; - tmporx |= (sBreakInputConfig->Polarity << bkin_polarity_bitpos) & bkin_polarity_mask; - } - - /* Set TIMx_OR3 */ - htim->Instance->OR3 = tmporx; - break; - } - default: - status = HAL_ERROR; - break; - } - - __HAL_UNLOCK(htim); - - return status; -} - -/** - * @brief Configures the TIMx Remapping input capabilities. - * @param htim TIM handle. - * @param Remap specifies the TIM remapping source. - @if STM32L422xx - * For TIM1, the parameter is a combination of 2 fields (field1 | field2): - * - * field1 can have the following values: - * @arg TIM_TIM1_ETR_ADC1_NONE: TIM1_ETR is not connected to any ADC1 AWD (analog watchdog) - * @arg TIM_TIM1_ETR_ADC1_AWD1: TIM1_ETR is connected to ADC1 AWD1 - * @arg TIM_TIM1_ETR_ADC1_AWD2: TIM1_ETR is connected to ADC1 AWD2 - * @arg TIM_TIM1_ETR_ADC1_AWD3: TIM1_ETR is connected to ADC1 AWD3 - * - * field2 can have the following values: - * @arg TIM_TIM1_TI1_GPIO: TIM1 TI1 is connected to GPIO - * @arg TIM_TIM1_TI1_COMP1: TIM1 TI1 is connected to COMP1 output - * - @endif -@if STM32L486xx - * For TIM1, the parameter is a combination of 4 fields (field1 | field2 | field3 | field4): - * - * field1 can have the following values: - * @arg TIM_TIM1_ETR_ADC1_NONE: TIM1_ETR is not connected to any ADC1 AWD (analog watchdog) - * @arg TIM_TIM1_ETR_ADC1_AWD1: TIM1_ETR is connected to ADC1 AWD1 - * @arg TIM_TIM1_ETR_ADC1_AWD2: TIM1_ETR is connected to ADC1 AWD2 - * @arg TIM_TIM1_ETR_ADC1_AWD3: TIM1_ETR is connected to ADC1 AWD3 - * - * field2 can have the following values: - * @arg TIM_TIM1_ETR_ADC3_NONE: TIM1_ETR is not connected to any ADC3 AWD (analog watchdog) - * @arg TIM_TIM1_ETR_ADC3_AWD1: TIM1_ETR is connected to ADC3 AWD1 - * @arg TIM_TIM1_ETR_ADC3_AWD2: TIM1_ETR is connected to ADC3 AWD2 - * @arg TIM_TIM1_ETR_ADC3_AWD3: TIM1_ETR is connected to ADC3 AWD3 - * - * field3 can have the following values: - * @arg TIM_TIM1_TI1_GPIO: TIM1 TI1 is connected to GPIO - * @arg TIM_TIM1_TI1_COMP1: TIM1 TI1 is connected to COMP1 output - * - * field4 can have the following values: - * @arg TIM_TIM1_ETR_COMP1: TIM1_ETR is connected to COMP1 output - * @arg TIM_TIM1_ETR_COMP2: TIM1_ETR is connected to COMP2 output - * @note When field4 is set to TIM_TIM1_ETR_COMP1 or TIM_TIM1_ETR_COMP2 field1 and field2 values are not significant - @endif - @if STM32L443xx - * For TIM1, the parameter is a combination of 3 fields (field1 | field2 | field3): - * - * field1 can have the following values: - * @arg TIM_TIM1_ETR_ADC1_NONE: TIM1_ETR is not connected to any ADC1 AWD (analog watchdog) - * @arg TIM_TIM1_ETR_ADC1_AWD1: TIM1_ETR is connected to ADC1 AWD1 - * @arg TIM_TIM1_ETR_ADC1_AWD2: TIM1_ETR is connected to ADC1 AWD2 - * @arg TIM_TIM1_ETR_ADC1_AWD3: TIM1_ETR is connected to ADC1 AWD3 - * - * field2 can have the following values: - * @arg TIM_TIM1_TI1_GPIO: TIM1 TI1 is connected to GPIO - * @arg TIM_TIM1_TI1_COMP1: TIM1 TI1 is connected to COMP1 output - * - * field3 can have the following values: - * @arg TIM_TIM1_ETR_COMP1: TIM1_ETR is connected to COMP1 output - * @arg TIM_TIM1_ETR_COMP2: TIM1_ETR is connected to COMP2 output - * - * @note When field3 is set to TIM_TIM1_ETR_COMP1 or TIM_TIM1_ETR_COMP2 field1 values is not significant - * - @endif - @if STM32L486xx - * For TIM2, the parameter is a combination of 3 fields (field1 | field2 | field3): - * - * field1 can have the following values: - * @arg TIM_TIM2_ITR1_TIM8_TRGO: TIM2_ITR1 is connected to TIM8_TRGO - * @arg TIM_TIM2_ITR1_OTG_FS_SOF: TIM2_ITR1 is connected to OTG_FS SOF - * - * field2 can have the following values: - * @arg TIM_TIM2_ETR_GPIO: TIM2_ETR is connected to GPIO - * @arg TIM_TIM2_ETR_LSE: TIM2_ETR is connected to LSE - * @arg TIM_TIM2_ETR_COMP1: TIM2_ETR is connected to COMP1 output - * @arg TIM_TIM2_ETR_COMP2: TIM2_ETR is connected to COMP2 output - * - * field3 can have the following values: - * @arg TIM_TIM2_TI4_GPIO: TIM2 TI4 is connected to GPIO - * @arg TIM_TIM2_TI4_COMP1: TIM2 TI4 is connected to COMP1 output - * @arg TIM_TIM2_TI4_COMP2: TIM2 TI4 is connected to COMP2 output - * @arg TIM_TIM2_TI4_COMP1_COMP2: TIM2 TI4 is connected to logical OR between COMP1 and COMP2 output - @endif - @if STM32L422xx - * For TIM2, the parameter is a combination of 3 fields (field1 | field2 | field3): - * - * field1 can have the following values: - * @arg TIM_TIM2_ITR1_NONE: No internal trigger on TIM2_ITR1 - * @arg TIM_TIM2_ITR1_USB_SOF: TIM2_ITR1 is connected to USB SOF - * - * field2 can have the following values: - * @arg TIM_TIM2_ETR_GPIO: TIM2_ETR is connected to GPIO - * @arg TIM_TIM2_ETR_LSE: TIM2_ETR is connected to LSE - * @arg TIM_TIM2_ETR_COMP1: TIM2_ETR is connected to COMP1 output - * - * field3 can have the following values: - * @arg TIM_TIM2_TI4_GPIO: TIM2 TI4 is connected to GPIO - * @arg TIM_TIM2_TI4_COMP1: TIM2 TI4 is connected to COMP1 output - * - @endif - @if STM32L443xx - * For TIM2, the parameter is a combination of 3 fields (field1 | field2 | field3): - * - * field1 can have the following values: - * @arg TIM_TIM2_ITR1_NONE: No internal trigger on TIM2_ITR1 - * @arg TIM_TIM2_ITR1_USB_SOF: TIM2_ITR1 is connected to USB SOF - * - * field2 can have the following values: - * @arg TIM_TIM2_ETR_GPIO: TIM2_ETR is connected to GPIO - * @arg TIM_TIM2_ETR_LSE: TIM2_ETR is connected to LSE - * @arg TIM_TIM2_ETR_COMP1: TIM2_ETR is connected to COMP1 output - * @arg TIM_TIM2_ETR_COMP2: TIM2_ETR is connected to COMP2 output - * - * field3 can have the following values: - * @arg TIM_TIM2_TI4_GPIO: TIM2 TI4 is connected to GPIO - * @arg TIM_TIM2_TI4_COMP1: TIM2 TI4 is connected to COMP1 output - * @arg TIM_TIM2_TI4_COMP2: TIM2 TI4 is connected to COMP2 output - * @arg TIM_TIM2_TI4_COMP1_COMP2: TIM2 TI4 is connected to logical OR between COMP1 and COMP2 output - * - @endif - @if STM32L486xx - * For TIM3, the parameter is a combination 2 fields(field1 | field2): - * - * field1 can have the following values: - * @arg TIM_TIM3_TI1_GPIO: TIM3 TI1 is connected to GPIO - * @arg TIM_TIM3_TI1_COMP1: TIM3 TI1 is connected to COMP1 output - * @arg TIM_TIM3_TI1_COMP2: TIM3 TI1 is connected to COMP2 output - * @arg TIM_TIM3_TI1_COMP1_COMP2: TIM3 TI1 is connected to logical OR between COMP1 and COMP2 output - * - * field2 can have the following values: - * @arg TIM_TIM3_ETR_GPIO: TIM3_ETR is connected to GPIO - * @arg TIM_TIM3_ETR_COMP1: TIM3_ETR is connected to COMP1 output - * - @endif - @if STM32L486xx - * For TIM8, the parameter is a combination of 3 fields (field1 | field2 | field3): - * - * field1 can have the following values: - * @arg TIM_TIM8_ETR_ADC2_NONE: TIM8_ETR is not connected to any ADC2 AWD (analog watchdog) - * @arg TIM_TIM8_ETR_ADC2_AWD1: TIM8_ETR is connected to ADC2 AWD1 - * @arg TIM_TIM8_ETR_ADC2_AWD2: TIM8_ETR is connected to ADC2 AWD2 - * @arg TIM_TIM8_ETR_ADC2_AWD3: TIM8_ETR is connected to ADC2 AWD3 - * - * field2 can have the following values: - * @arg TIM_TIM8_ETR_ADC3_NONE: TIM8_ETR is not connected to any ADC3 AWD (analog watchdog) - * @arg TIM_TIM8_ETR_ADC3_AWD1: TIM8_ETR is connected to ADC3 AWD1 - * @arg TIM_TIM8_ETR_ADC3_AWD2: TIM8_ETR is connected to ADC3 AWD2 - * @arg TIM_TIM8_ETR_ADC3_AWD3: TIM8_ETR is connected to ADC3 AWD3 - * - * field3 can have the following values: - * @arg TIM_TIM8_TI1_GPIO: TIM8 TI1 is connected to GPIO - * @arg TIM_TIM8_TI1_COMP2: TIM8 TI1 is connected to COMP2 output - * - * field4 can have the following values: - * @arg TIM_TIM8_ETR_COMP1: TIM8_ETR is connected to COMP1 output - * @arg TIM_TIM8_ETR_COMP2: TIM8_ETR is connected to COMP2 output - * @note When field4 is set to TIM_TIM8_ETR_COMP1 or TIM_TIM8_ETR_COMP2 field1 and field2 values are not significant - * - @endif - @if STM32L422xx - * For TIM15, the parameter is a combination of 2 fields (field1 | field2): - * - * field1 can have the following values: - * @arg TIM_TIM15_TI1_GPIO: TIM15 TI1 is connected to GPIO - * @arg TIM_TIM15_TI1_LSE: TIM15 TI1 is connected to LSE - * - * field2 can have the following values: - * @arg TIM_TIM15_ENCODERMODE_NONE: No redirection - * @arg TIM_TIM15_ENCODERMODE_TIM2: TIM2 IC1 and TIM2 IC2 are connected to TIM15 IC1 and TIM15 IC2 respectively - * - @endif - @if STM32L443xx - * For TIM15, the parameter is a combination of 2 fields (field1 | field2): - * - * field1 can have the following values: - * @arg TIM_TIM15_TI1_GPIO: TIM15 TI1 is connected to GPIO - * @arg TIM_TIM15_TI1_LSE: TIM15 TI1 is connected to LSE - * - * field2 can have the following values: - * @arg TIM_TIM15_ENCODERMODE_NONE: No redirection - * @arg TIM_TIM15_ENCODERMODE_TIM2: TIM2 IC1 and TIM2 IC2 are connected to TIM15 IC1 and TIM15 IC2 respectively - * @arg TIM_TIM15_ENCODERMODE_TIM3: TIM3 IC1 and TIM3 IC2 are connected to TIM15 IC1 and TIM15 IC2 respectively - * @arg TIM_TIM15_ENCODERMODE_TIM4: TIM4 IC1 and TIM4 IC2 are connected to TIM15 IC1 and TIM15 IC2 respectively - * - @endif - @if STM32L486xx - * @arg TIM_TIM16_TI1_GPIO: TIM16 TI1 is connected to GPIO - * @arg TIM_TIM16_TI1_LSI: TIM16 TI1 is connected to LSI - * @arg TIM_TIM16_TI1_LSE: TIM16 TI1 is connected to LSE - * @arg TIM_TIM16_TI1_RTC: TIM16 TI1 is connected to RTC wakeup interrupt - * - @endif - @if STM32L422xx - * For TIM16, the parameter can have the following values: - * @arg TIM_TIM16_TI1_GPIO: TIM16 TI1 is connected to GPIO - * @arg TIM_TIM16_TI1_LSI: TIM16 TI1 is connected to LSI - * @arg TIM_TIM16_TI1_LSE: TIM16 TI1 is connected to LSE - * @arg TIM_TIM16_TI1_RTC: TIM16 TI1 is connected to RTC wakeup interrupt - * @arg TIM_TIM16_TI1_MSI: TIM16 TI1 is connected to MSI (constraints: MSI clock < 1/4 TIM APB clock) - * @arg TIM_TIM16_TI1_HSE_32: TIM16 TI1 is connected to HSE div 32 (note that HSE div 32 must be selected as RTC clock source) - * @arg TIM_TIM16_TI1_MCO: TIM16 TI1 is connected to MCO - * - @endif - @if STM32L443xx - * For TIM16, the parameter can have the following values: - * @arg TIM_TIM16_TI1_GPIO: TIM16 TI1 is connected to GPIO - * @arg TIM_TIM16_TI1_LSI: TIM16 TI1 is connected to LSI - * @arg TIM_TIM16_TI1_LSE: TIM16 TI1 is connected to LSE - * @arg TIM_TIM16_TI1_RTC: TIM16 TI1 is connected to RTC wakeup interrupt - * @arg TIM_TIM16_TI1_MSI: TIM16 TI1 is connected to MSI (constraints: MSI clock < 1/4 TIM APB clock) - * @arg TIM_TIM16_TI1_HSE_32: TIM16 TI1 is connected to HSE div 32 (note that HSE div 32 must be selected as RTC clock source) - * @arg TIM_TIM16_TI1_MCO: TIM16 TI1 is connected to MCO - * - @endif - @if STM32L486xx - * For TIM17, the parameter can have the following values: - * @arg TIM_TIM17_TI1_GPIO: TIM17 TI1 is connected to GPIO - * @arg TIM_TIM17_TI1_MSI: TIM17 TI1 is connected to MSI (constraints: MSI clock < 1/4 TIM APB clock) - * @arg TIM_TIM17_TI1_HSE_32: TIM17 TI1 is connected to HSE div 32 - * @arg TIM_TIM17_TI1_MCO: TIM17 TI1 is connected to MCO - @endif - * - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIMEx_RemapConfig(TIM_HandleTypeDef *htim, uint32_t Remap) -{ - uint32_t tmpor1; - uint32_t tmpor2; - - /* Check parameters */ - assert_param(IS_TIM_REMAP_INSTANCE(htim->Instance)); - assert_param(IS_TIM_REMAP(Remap)); - - __HAL_LOCK(htim); - - /* Set ETR_SEL bit field (if required) */ - if (IS_TIM_ETRSEL_INSTANCE(htim->Instance)) - { - tmpor2 = htim->Instance->OR2; - tmpor2 &= ~TIM1_OR2_ETRSEL_Msk; - tmpor2 |= (Remap & TIM1_OR2_ETRSEL_Msk); - - /* Set TIMx_OR2 */ - htim->Instance->OR2 = tmpor2; - } - - /* Set other remapping capabilities */ - tmpor1 = Remap; - tmpor1 &= ~TIM1_OR2_ETRSEL_Msk; - - /* Set TIMx_OR1 */ - htim->Instance->OR1 = tmpor1; - - __HAL_UNLOCK(htim); - - return HAL_OK; -} - -/** - * @brief Group channel 5 and channel 1, 2 or 3 - * @param htim TIM handle. - * @param Channels specifies the reference signal(s) the OC5REF is combined with. - * This parameter can be any combination of the following values: - * TIM_GROUPCH5_NONE: No effect of OC5REF on OC1REFC, OC2REFC and OC3REFC - * TIM_GROUPCH5_OC1REFC: OC1REFC is the logical AND of OC1REFC and OC5REF - * TIM_GROUPCH5_OC2REFC: OC2REFC is the logical AND of OC2REFC and OC5REF - * TIM_GROUPCH5_OC3REFC: OC3REFC is the logical AND of OC3REFC and OC5REF - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIMEx_GroupChannel5(TIM_HandleTypeDef *htim, uint32_t Channels) -{ - /* Check parameters */ - assert_param(IS_TIM_COMBINED3PHASEPWM_INSTANCE(htim->Instance)); - assert_param(IS_TIM_GROUPCH5(Channels)); - - /* Process Locked */ - __HAL_LOCK(htim); - - htim->State = HAL_TIM_STATE_BUSY; - - /* Clear GC5Cx bit fields */ - htim->Instance->CCR5 &= ~(TIM_CCR5_GC5C3 | TIM_CCR5_GC5C2 | TIM_CCR5_GC5C1); - - /* Set GC5Cx bit fields */ - htim->Instance->CCR5 |= Channels; - - /* Change the htim state */ - htim->State = HAL_TIM_STATE_READY; - - __HAL_UNLOCK(htim); - - return HAL_OK; -} - -/** - * @} - */ - -/** @defgroup TIMEx_Exported_Functions_Group6 Extended Callbacks functions - * @brief Extended Callbacks functions - * -@verbatim - ============================================================================== - ##### Extended Callbacks functions ##### - ============================================================================== - [..] - This section provides Extended TIM callback functions: - (+) Timer Commutation callback - (+) Timer Break callback - -@endverbatim - * @{ - */ - -/** - * @brief Hall commutation changed callback in non-blocking mode - * @param htim TIM handle - * @retval None - */ -__weak void HAL_TIMEx_CommutCallback(TIM_HandleTypeDef *htim) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(htim); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_TIMEx_CommutCallback could be implemented in the user file - */ -} -/** - * @brief Hall commutation changed half complete callback in non-blocking mode - * @param htim TIM handle - * @retval None - */ -__weak void HAL_TIMEx_CommutHalfCpltCallback(TIM_HandleTypeDef *htim) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(htim); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_TIMEx_CommutHalfCpltCallback could be implemented in the user file - */ -} - -/** - * @brief Hall Break detection callback in non-blocking mode - * @param htim TIM handle - * @retval None - */ -__weak void HAL_TIMEx_BreakCallback(TIM_HandleTypeDef *htim) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(htim); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_TIMEx_BreakCallback could be implemented in the user file - */ -} - -/** - * @brief Hall Break2 detection callback in non blocking mode - * @param htim: TIM handle - * @retval None - */ -__weak void HAL_TIMEx_Break2Callback(TIM_HandleTypeDef *htim) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(htim); - - /* NOTE : This function Should not be modified, when the callback is needed, - the HAL_TIMEx_Break2Callback could be implemented in the user file - */ -} -/** - * @} - */ - -/** @defgroup TIMEx_Exported_Functions_Group7 Extended Peripheral State functions - * @brief Extended Peripheral State functions - * -@verbatim - ============================================================================== - ##### Extended Peripheral State functions ##### - ============================================================================== - [..] - This subsection permits to get in run-time the status of the peripheral - and the data flow. - -@endverbatim - * @{ - */ - -/** - * @brief Return the TIM Hall Sensor interface handle state. - * @param htim TIM Hall Sensor handle - * @retval HAL state - */ -HAL_TIM_StateTypeDef HAL_TIMEx_HallSensor_GetState(const TIM_HandleTypeDef *htim) -{ - return htim->State; -} - -/** - * @brief Return actual state of the TIM complementary channel. - * @param htim TIM handle - * @param ChannelN TIM Complementary channel - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 - * @arg TIM_CHANNEL_2: TIM Channel 2 - * @arg TIM_CHANNEL_3: TIM Channel 3 - * @retval TIM Complementary channel state - */ -HAL_TIM_ChannelStateTypeDef HAL_TIMEx_GetChannelNState(const TIM_HandleTypeDef *htim, uint32_t ChannelN) -{ - HAL_TIM_ChannelStateTypeDef channel_state; - - /* Check the parameters */ - assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, ChannelN)); - - channel_state = TIM_CHANNEL_N_STATE_GET(htim, ChannelN); - - return channel_state; -} -/** - * @} - */ - -/** - * @} - */ - -/* Private functions ---------------------------------------------------------*/ -/** @defgroup TIMEx_Private_Functions TIM Extended Private Functions - * @{ - */ - -/** - * @brief TIM DMA Commutation callback. - * @param hdma pointer to DMA handle. - * @retval None - */ -void TIMEx_DMACommutationCplt(DMA_HandleTypeDef *hdma) -{ - TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; - - /* Change the htim state */ - htim->State = HAL_TIM_STATE_READY; - -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) - htim->CommutationCallback(htim); -#else - HAL_TIMEx_CommutCallback(htim); -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ -} - -/** - * @brief TIM DMA Commutation half complete callback. - * @param hdma pointer to DMA handle. - * @retval None - */ -void TIMEx_DMACommutationHalfCplt(DMA_HandleTypeDef *hdma) -{ - TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; - - /* Change the htim state */ - htim->State = HAL_TIM_STATE_READY; - -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) - htim->CommutationHalfCpltCallback(htim); -#else - HAL_TIMEx_CommutHalfCpltCallback(htim); -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ -} - - -/** - * @brief TIM DMA Delay Pulse complete callback (complementary channel). - * @param hdma pointer to DMA handle. - * @retval None - */ -static void TIM_DMADelayPulseNCplt(DMA_HandleTypeDef *hdma) -{ - TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; - - if (hdma == htim->hdma[TIM_DMA_ID_CC1]) - { - htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1; - - if (hdma->Init.Mode == DMA_NORMAL) - { - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); - } - } - else if (hdma == htim->hdma[TIM_DMA_ID_CC2]) - { - htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2; - - if (hdma->Init.Mode == DMA_NORMAL) - { - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); - } - } - else if (hdma == htim->hdma[TIM_DMA_ID_CC3]) - { - htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3; - - if (hdma->Init.Mode == DMA_NORMAL) - { - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_3, HAL_TIM_CHANNEL_STATE_READY); - } - } - else if (hdma == htim->hdma[TIM_DMA_ID_CC4]) - { - htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4; - - if (hdma->Init.Mode == DMA_NORMAL) - { - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_4, HAL_TIM_CHANNEL_STATE_READY); - } - } - else - { - /* nothing to do */ - } - -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) - htim->PWM_PulseFinishedCallback(htim); -#else - HAL_TIM_PWM_PulseFinishedCallback(htim); -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ - - htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; -} - -/** - * @brief TIM DMA error callback (complementary channel) - * @param hdma pointer to DMA handle. - * @retval None - */ -static void TIM_DMAErrorCCxN(DMA_HandleTypeDef *hdma) -{ - TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; - - if (hdma == htim->hdma[TIM_DMA_ID_CC1]) - { - htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1; - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); - } - else if (hdma == htim->hdma[TIM_DMA_ID_CC2]) - { - htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2; - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); - } - else if (hdma == htim->hdma[TIM_DMA_ID_CC3]) - { - htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3; - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_3, HAL_TIM_CHANNEL_STATE_READY); - } - else - { - /* nothing to do */ - } - -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) - htim->ErrorCallback(htim); -#else - HAL_TIM_ErrorCallback(htim); -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ - - htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; -} - -/** - * @brief Enables or disables the TIM Capture Compare Channel xN. - * @param TIMx to select the TIM peripheral - * @param Channel specifies the TIM Channel - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 - * @arg TIM_CHANNEL_2: TIM Channel 2 - * @arg TIM_CHANNEL_3: TIM Channel 3 - * @param ChannelNState specifies the TIM Channel CCxNE bit new state. - * This parameter can be: TIM_CCxN_ENABLE or TIM_CCxN_Disable. - * @retval None - */ -static void TIM_CCxNChannelCmd(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t ChannelNState) -{ - uint32_t tmp; - - tmp = TIM_CCER_CC1NE << (Channel & 0x1FU); /* 0x1FU = 31 bits max shift */ - - /* Reset the CCxNE Bit */ - TIMx->CCER &= ~tmp; - - /* Set or reset the CCxNE Bit */ - TIMx->CCER |= (uint32_t)(ChannelNState << (Channel & 0x1FU)); /* 0x1FU = 31 bits max shift */ -} -/** - * @} - */ - -#endif /* HAL_TIM_MODULE_ENABLED */ -/** - * @} - */ - -/** - * @} - */ +/** + ****************************************************************************** + * @file stm32l4xx_hal_tim_ex.c + * @author MCD Application Team + * @brief TIM HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Timer Extended peripheral: + * + Time Hall Sensor Interface Initialization + * + Time Hall Sensor Interface Start + * + Time Complementary signal break and dead time configuration + * + Time Master and Slave synchronization configuration + * + Time Output Compare/PWM Channel Configuration (for channels 5 and 6) + * + Time OCRef clear configuration + * + Timer remapping capabilities configuration + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### TIMER Extended features ##### + ============================================================================== + [..] + The Timer Extended features include: + (#) Complementary outputs with programmable dead-time for : + (++) Output Compare + (++) PWM generation (Edge and Center-aligned Mode) + (++) One-pulse mode output + (#) Synchronization circuit to control the timer with external signals and to + interconnect several timers together. + (#) Break input to put the timer output signals in reset state or in a known state. + (#) Supports incremental (quadrature) encoder and hall-sensor circuitry for + positioning purposes + + ##### How to use this driver ##### + ============================================================================== + [..] + (#) Initialize the TIM low level resources by implementing the following functions + depending on the selected feature: + (++) Hall Sensor output : HAL_TIMEx_HallSensor_MspInit() + + (#) Initialize the TIM low level resources : + (##) Enable the TIM interface clock using __HAL_RCC_TIMx_CLK_ENABLE(); + (##) TIM pins configuration + (+++) Enable the clock for the TIM GPIOs using the following function: + __HAL_RCC_GPIOx_CLK_ENABLE(); + (+++) Configure these TIM pins in Alternate function mode using HAL_GPIO_Init(); + + (#) The external Clock can be configured, if needed (the default clock is the + internal clock from the APBx), using the following function: + HAL_TIM_ConfigClockSource, the clock configuration should be done before + any start function. + + (#) Configure the TIM in the desired functioning mode using one of the + initialization function of this driver: + (++) HAL_TIMEx_HallSensor_Init() and HAL_TIMEx_ConfigCommutEvent(): to use the + Timer Hall Sensor Interface and the commutation event with the corresponding + Interrupt and DMA request if needed (Note that One Timer is used to interface + with the Hall sensor Interface and another Timer should be used to use + the commutation event). + + (#) Activate the TIM peripheral using one of the start functions: + (++) Complementary Output Compare : HAL_TIMEx_OCN_Start(), HAL_TIMEx_OCN_Start_DMA(), + HAL_TIMEx_OCN_Start_IT() + (++) Complementary PWM generation : HAL_TIMEx_PWMN_Start(), HAL_TIMEx_PWMN_Start_DMA(), + HAL_TIMEx_PWMN_Start_IT() + (++) Complementary One-pulse mode output : HAL_TIMEx_OnePulseN_Start(), HAL_TIMEx_OnePulseN_Start_IT() + (++) Hall Sensor output : HAL_TIMEx_HallSensor_Start(), HAL_TIMEx_HallSensor_Start_DMA(), + HAL_TIMEx_HallSensor_Start_IT(). + + @endverbatim + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l4xx_hal.h" + +/** @addtogroup STM32L4xx_HAL_Driver + * @{ + */ + +/** @defgroup TIMEx TIMEx + * @brief TIM Extended HAL module driver + * @{ + */ + +#ifdef HAL_TIM_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +static void TIM_DMADelayPulseNCplt(DMA_HandleTypeDef *hdma); +static void TIM_DMAErrorCCxN(DMA_HandleTypeDef *hdma); +static void TIM_CCxNChannelCmd(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t ChannelNState); + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup TIMEx_Exported_Functions TIM Extended Exported Functions + * @{ + */ + +/** @defgroup TIMEx_Exported_Functions_Group1 Extended Timer Hall Sensor functions + * @brief Timer Hall Sensor functions + * +@verbatim + ============================================================================== + ##### Timer Hall Sensor functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+) Initialize and configure TIM HAL Sensor. + (+) De-initialize TIM HAL Sensor. + (+) Start the Hall Sensor Interface. + (+) Stop the Hall Sensor Interface. + (+) Start the Hall Sensor Interface and enable interrupts. + (+) Stop the Hall Sensor Interface and disable interrupts. + (+) Start the Hall Sensor Interface and enable DMA transfers. + (+) Stop the Hall Sensor Interface and disable DMA transfers. + +@endverbatim + * @{ + */ +/** + * @brief Initializes the TIM Hall Sensor Interface and initialize the associated handle. + * @note When the timer instance is initialized in Hall Sensor Interface mode, + * timer channels 1 and channel 2 are reserved and cannot be used for + * other purpose. + * @param htim TIM Hall Sensor Interface handle + * @param sConfig TIM Hall Sensor configuration structure + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_HallSensor_Init(TIM_HandleTypeDef *htim, const TIM_HallSensor_InitTypeDef *sConfig) +{ + TIM_OC_InitTypeDef OC_Config; + + /* Check the TIM handle allocation */ + if (htim == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_TIM_HALL_SENSOR_INTERFACE_INSTANCE(htim->Instance)); + assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode)); + assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision)); + assert_param(IS_TIM_AUTORELOAD_PRELOAD(htim->Init.AutoReloadPreload)); + assert_param(IS_TIM_IC_POLARITY(sConfig->IC1Polarity)); + assert_param(IS_TIM_PERIOD(htim, htim->Init.Period)); + assert_param(IS_TIM_IC_PRESCALER(sConfig->IC1Prescaler)); + assert_param(IS_TIM_IC_FILTER(sConfig->IC1Filter)); + + if (htim->State == HAL_TIM_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + htim->Lock = HAL_UNLOCKED; + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + /* Reset interrupt callbacks to legacy week callbacks */ + TIM_ResetCallback(htim); + + if (htim->HallSensor_MspInitCallback == NULL) + { + htim->HallSensor_MspInitCallback = HAL_TIMEx_HallSensor_MspInit; + } + /* Init the low level hardware : GPIO, CLOCK, NVIC */ + htim->HallSensor_MspInitCallback(htim); +#else + /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */ + HAL_TIMEx_HallSensor_MspInit(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + + /* Set the TIM state */ + htim->State = HAL_TIM_STATE_BUSY; + + /* Configure the Time base in the Encoder Mode */ + TIM_Base_SetConfig(htim->Instance, &htim->Init); + + /* Configure the Channel 1 as Input Channel to interface with the three Outputs of the Hall sensor */ + TIM_TI1_SetConfig(htim->Instance, sConfig->IC1Polarity, TIM_ICSELECTION_TRC, sConfig->IC1Filter); + + /* Reset the IC1PSC Bits */ + htim->Instance->CCMR1 &= ~TIM_CCMR1_IC1PSC; + /* Set the IC1PSC value */ + htim->Instance->CCMR1 |= sConfig->IC1Prescaler; + + /* Enable the Hall sensor interface (XOR function of the three inputs) */ + htim->Instance->CR2 |= TIM_CR2_TI1S; + + /* Select the TIM_TS_TI1F_ED signal as Input trigger for the TIM */ + htim->Instance->SMCR &= ~TIM_SMCR_TS; + htim->Instance->SMCR |= TIM_TS_TI1F_ED; + + /* Use the TIM_TS_TI1F_ED signal to reset the TIM counter each edge detection */ + htim->Instance->SMCR &= ~TIM_SMCR_SMS; + htim->Instance->SMCR |= TIM_SLAVEMODE_RESET; + + /* Program channel 2 in PWM 2 mode with the desired Commutation_Delay*/ + OC_Config.OCFastMode = TIM_OCFAST_DISABLE; + OC_Config.OCIdleState = TIM_OCIDLESTATE_RESET; + OC_Config.OCMode = TIM_OCMODE_PWM2; + OC_Config.OCNIdleState = TIM_OCNIDLESTATE_RESET; + OC_Config.OCNPolarity = TIM_OCNPOLARITY_HIGH; + OC_Config.OCPolarity = TIM_OCPOLARITY_HIGH; + OC_Config.Pulse = sConfig->Commutation_Delay; + + TIM_OC2_SetConfig(htim->Instance, &OC_Config); + + /* Select OC2REF as trigger output on TRGO: write the MMS bits in the TIMx_CR2 + register to 101 */ + htim->Instance->CR2 &= ~TIM_CR2_MMS; + htim->Instance->CR2 |= TIM_TRGO_OC2REF; + + /* Initialize the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_READY; + + /* Initialize the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + + /* Initialize the TIM state*/ + htim->State = HAL_TIM_STATE_READY; + + return HAL_OK; +} + +/** + * @brief DeInitializes the TIM Hall Sensor interface + * @param htim TIM Hall Sensor Interface handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_HallSensor_DeInit(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + + htim->State = HAL_TIM_STATE_BUSY; + + /* Disable the TIM Peripheral Clock */ + __HAL_TIM_DISABLE(htim); + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + if (htim->HallSensor_MspDeInitCallback == NULL) + { + htim->HallSensor_MspDeInitCallback = HAL_TIMEx_HallSensor_MspDeInit; + } + /* DeInit the low level hardware */ + htim->HallSensor_MspDeInitCallback(htim); +#else + /* DeInit the low level hardware: GPIO, CLOCK, NVIC */ + HAL_TIMEx_HallSensor_MspDeInit(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + + /* Change the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_RESET; + + /* Change the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_RESET); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_RESET); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_RESET); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_RESET); + + /* Change TIM state */ + htim->State = HAL_TIM_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Initializes the TIM Hall Sensor MSP. + * @param htim TIM Hall Sensor Interface handle + * @retval None + */ +__weak void HAL_TIMEx_HallSensor_MspInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIMEx_HallSensor_MspInit could be implemented in the user file + */ +} + +/** + * @brief DeInitializes TIM Hall Sensor MSP. + * @param htim TIM Hall Sensor Interface handle + * @retval None + */ +__weak void HAL_TIMEx_HallSensor_MspDeInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIMEx_HallSensor_MspDeInit could be implemented in the user file + */ +} + +/** + * @brief Starts the TIM Hall Sensor Interface. + * @param htim TIM Hall Sensor Interface handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start(TIM_HandleTypeDef *htim) +{ + uint32_t tmpsmcr; + HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef channel_2_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_2); + HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef complementary_channel_2_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_2); + + /* Check the parameters */ + assert_param(IS_TIM_HALL_SENSOR_INTERFACE_INSTANCE(htim->Instance)); + + /* Check the TIM channels state */ + if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (channel_2_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + + /* Set the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + + /* Enable the Input Capture channel 1 + (in the Hall Sensor Interface the three possible channels that can be used are TIM_CHANNEL_1, + TIM_CHANNEL_2 and TIM_CHANNEL_3) */ + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Hall sensor Interface. + * @param htim TIM Hall Sensor Interface handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_HALL_SENSOR_INTERFACE_INSTANCE(htim->Instance)); + + /* Disable the Input Capture channels 1, 2 and 3 + (in the Hall Sensor Interface the three possible channels that can be used are TIM_CHANNEL_1, + TIM_CHANNEL_2 and TIM_CHANNEL_3) */ + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the TIM Hall Sensor Interface in interrupt mode. + * @param htim TIM Hall Sensor Interface handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_IT(TIM_HandleTypeDef *htim) +{ + uint32_t tmpsmcr; + HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef channel_2_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_2); + HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef complementary_channel_2_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_2); + + /* Check the parameters */ + assert_param(IS_TIM_HALL_SENSOR_INTERFACE_INSTANCE(htim->Instance)); + + /* Check the TIM channels state */ + if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (channel_2_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + + /* Set the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + + /* Enable the capture compare Interrupts 1 event */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); + + /* Enable the Input Capture channel 1 + (in the Hall Sensor Interface the three possible channels that can be used are TIM_CHANNEL_1, + TIM_CHANNEL_2 and TIM_CHANNEL_3) */ + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Hall Sensor Interface in interrupt mode. + * @param htim TIM Hall Sensor Interface handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_IT(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_HALL_SENSOR_INTERFACE_INSTANCE(htim->Instance)); + + /* Disable the Input Capture channel 1 + (in the Hall Sensor Interface the three possible channels that can be used are TIM_CHANNEL_1, + TIM_CHANNEL_2 and TIM_CHANNEL_3) */ + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); + + /* Disable the capture compare Interrupts event */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the TIM Hall Sensor Interface in DMA mode. + * @param htim TIM Hall Sensor Interface handle + * @param pData The destination Buffer address. + * @param Length The length of data to be transferred from TIM peripheral to memory. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_DMA(TIM_HandleTypeDef *htim, uint32_t *pData, uint16_t Length) +{ + uint32_t tmpsmcr; + HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1); + + /* Check the parameters */ + assert_param(IS_TIM_HALL_SENSOR_INTERFACE_INSTANCE(htim->Instance)); + + /* Set the TIM channel state */ + if ((channel_1_state == HAL_TIM_CHANNEL_STATE_BUSY) + || (complementary_channel_1_state == HAL_TIM_CHANNEL_STATE_BUSY)) + { + return HAL_BUSY; + } + else if ((channel_1_state == HAL_TIM_CHANNEL_STATE_READY) + && (complementary_channel_1_state == HAL_TIM_CHANNEL_STATE_READY)) + { + if ((pData == NULL) || (Length == 0U)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + else + { + return HAL_ERROR; + } + + /* Enable the Input Capture channel 1 + (in the Hall Sensor Interface the three possible channels that can be used are TIM_CHANNEL_1, + TIM_CHANNEL_2 and TIM_CHANNEL_3) */ + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); + + /* Set the DMA Input Capture 1 Callbacks */ + htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMACaptureCplt; + htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel for Capture 1*/ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->CCR1, (uint32_t)pData, Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the capture compare 1 Interrupt */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1); + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Hall Sensor Interface in DMA mode. + * @param htim TIM Hall Sensor Interface handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_DMA(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_HALL_SENSOR_INTERFACE_INSTANCE(htim->Instance)); + + /* Disable the Input Capture channel 1 + (in the Hall Sensor Interface the three possible channels that can be used are TIM_CHANNEL_1, + TIM_CHANNEL_2 and TIM_CHANNEL_3) */ + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); + + + /* Disable the capture compare Interrupts 1 event */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1); + + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @} + */ + +/** @defgroup TIMEx_Exported_Functions_Group2 Extended Timer Complementary Output Compare functions + * @brief Timer Complementary Output Compare functions + * +@verbatim + ============================================================================== + ##### Timer Complementary Output Compare functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+) Start the Complementary Output Compare/PWM. + (+) Stop the Complementary Output Compare/PWM. + (+) Start the Complementary Output Compare/PWM and enable interrupts. + (+) Stop the Complementary Output Compare/PWM and disable interrupts. + (+) Start the Complementary Output Compare/PWM and enable DMA transfers. + (+) Stop the Complementary Output Compare/PWM and disable DMA transfers. + +@endverbatim + * @{ + */ + +/** + * @brief Starts the TIM Output Compare signal generation on the complementary + * output. + * @param htim TIM Output Compare handle + * @param Channel TIM Channel to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_OCN_Start(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); + + /* Check the TIM complementary channel state */ + if (TIM_CHANNEL_N_STATE_GET(htim, Channel) != HAL_TIM_CHANNEL_STATE_READY) + { + return HAL_ERROR; + } + + /* Set the TIM complementary channel state */ + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + + /* Enable the Capture compare channel N */ + TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE); + + /* Enable the Main Output */ + __HAL_TIM_MOE_ENABLE(htim); + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Output Compare signal generation on the complementary + * output. + * @param htim TIM handle + * @param Channel TIM Channel to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_OCN_Stop(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); + + /* Disable the Capture compare channel N */ + TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE); + + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM complementary channel state */ + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the TIM Output Compare signal generation in interrupt mode + * on the complementary output. + * @param htim TIM OC handle + * @param Channel TIM Channel to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_OCN_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); + + /* Check the TIM complementary channel state */ + if (TIM_CHANNEL_N_STATE_GET(htim, Channel) != HAL_TIM_CHANNEL_STATE_READY) + { + return HAL_ERROR; + } + + /* Set the TIM complementary channel state */ + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Enable the TIM Output Compare interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Enable the TIM Output Compare interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Enable the TIM Output Compare interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC3); + break; + } + + + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Enable the TIM Break interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_BREAK); + + /* Enable the Capture compare channel N */ + TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE); + + /* Enable the Main Output */ + __HAL_TIM_MOE_ENABLE(htim); + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + } + + /* Return function status */ + return status; +} + +/** + * @brief Stops the TIM Output Compare signal generation in interrupt mode + * on the complementary output. + * @param htim TIM Output Compare handle + * @param Channel TIM Channel to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t tmpccer; + + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Disable the TIM Output Compare interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Disable the TIM Output Compare interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Disable the TIM Output Compare interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC3); + break; + } + + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Disable the Capture compare channel N */ + TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE); + + /* Disable the TIM Break interrupt (only if no more channel is active) */ + tmpccer = htim->Instance->CCER; + if ((tmpccer & TIM_CCER_CCxNE_MASK) == (uint32_t)RESET) + { + __HAL_TIM_DISABLE_IT(htim, TIM_IT_BREAK); + } + + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM complementary channel state */ + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + } + + /* Return function status */ + return status; +} + +/** + * @brief Starts the TIM Output Compare signal generation in DMA mode + * on the complementary output. + * @param htim TIM Output Compare handle + * @param Channel TIM Channel to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @param pData The source Buffer address. + * @param Length The length of data to be transferred from memory to TIM peripheral + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_OCN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, const uint32_t *pData, + uint16_t Length) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); + + /* Set the TIM complementary channel state */ + if (TIM_CHANNEL_N_STATE_GET(htim, Channel) == HAL_TIM_CHANNEL_STATE_BUSY) + { + return HAL_BUSY; + } + else if (TIM_CHANNEL_N_STATE_GET(htim, Channel) == HAL_TIM_CHANNEL_STATE_READY) + { + if ((pData == NULL) || (Length == 0U)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + else + { + return HAL_ERROR; + } + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMADelayPulseNCplt; + htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAErrorCCxN ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)pData, (uint32_t)&htim->Instance->CCR1, + Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Output Compare DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMADelayPulseNCplt; + htim->hdma[TIM_DMA_ID_CC2]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAErrorCCxN ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)pData, (uint32_t)&htim->Instance->CCR2, + Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Output Compare DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMADelayPulseNCplt; + htim->hdma[TIM_DMA_ID_CC3]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAErrorCCxN ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)pData, (uint32_t)&htim->Instance->CCR3, + Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Output Compare DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC3); + break; + } + + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Enable the Capture compare channel N */ + TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE); + + /* Enable the Main Output */ + __HAL_TIM_MOE_ENABLE(htim); + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + } + + /* Return function status */ + return status; +} + +/** + * @brief Stops the TIM Output Compare signal generation in DMA mode + * on the complementary output. + * @param htim TIM Output Compare handle + * @param Channel TIM Channel to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Disable the TIM Output Compare DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]); + break; + } + + case TIM_CHANNEL_2: + { + /* Disable the TIM Output Compare DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC2]); + break; + } + + case TIM_CHANNEL_3: + { + /* Disable the TIM Output Compare DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC3); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC3]); + break; + } + + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Disable the Capture compare channel N */ + TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE); + + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM complementary channel state */ + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + } + + /* Return function status */ + return status; +} + +/** + * @} + */ + +/** @defgroup TIMEx_Exported_Functions_Group3 Extended Timer Complementary PWM functions + * @brief Timer Complementary PWM functions + * +@verbatim + ============================================================================== + ##### Timer Complementary PWM functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+) Start the Complementary PWM. + (+) Stop the Complementary PWM. + (+) Start the Complementary PWM and enable interrupts. + (+) Stop the Complementary PWM and disable interrupts. + (+) Start the Complementary PWM and enable DMA transfers. + (+) Stop the Complementary PWM and disable DMA transfers. +@endverbatim + * @{ + */ + +/** + * @brief Starts the PWM signal generation on the complementary output. + * @param htim TIM handle + * @param Channel TIM Channel to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_PWMN_Start(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); + + /* Check the TIM complementary channel state */ + if (TIM_CHANNEL_N_STATE_GET(htim, Channel) != HAL_TIM_CHANNEL_STATE_READY) + { + return HAL_ERROR; + } + + /* Set the TIM complementary channel state */ + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + + /* Enable the complementary PWM output */ + TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE); + + /* Enable the Main Output */ + __HAL_TIM_MOE_ENABLE(htim); + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the PWM signal generation on the complementary output. + * @param htim TIM handle + * @param Channel TIM Channel to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); + + /* Disable the complementary PWM output */ + TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE); + + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM complementary channel state */ + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the PWM signal generation in interrupt mode on the + * complementary output. + * @param htim TIM handle + * @param Channel TIM Channel to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); + + /* Check the TIM complementary channel state */ + if (TIM_CHANNEL_N_STATE_GET(htim, Channel) != HAL_TIM_CHANNEL_STATE_READY) + { + return HAL_ERROR; + } + + /* Set the TIM complementary channel state */ + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Enable the TIM Capture/Compare 1 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Enable the TIM Capture/Compare 2 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Enable the TIM Capture/Compare 3 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC3); + break; + } + + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Enable the TIM Break interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_BREAK); + + /* Enable the complementary PWM output */ + TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE); + + /* Enable the Main Output */ + __HAL_TIM_MOE_ENABLE(htim); + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + } + + /* Return function status */ + return status; +} + +/** + * @brief Stops the PWM signal generation in interrupt mode on the + * complementary output. + * @param htim TIM handle + * @param Channel TIM Channel to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t tmpccer; + + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Disable the TIM Capture/Compare 1 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Disable the TIM Capture/Compare 2 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Disable the TIM Capture/Compare 3 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC3); + break; + } + + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Disable the complementary PWM output */ + TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE); + + /* Disable the TIM Break interrupt (only if no more channel is active) */ + tmpccer = htim->Instance->CCER; + if ((tmpccer & TIM_CCER_CCxNE_MASK) == (uint32_t)RESET) + { + __HAL_TIM_DISABLE_IT(htim, TIM_IT_BREAK); + } + + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM complementary channel state */ + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + } + + /* Return function status */ + return status; +} + +/** + * @brief Starts the TIM PWM signal generation in DMA mode on the + * complementary output + * @param htim TIM handle + * @param Channel TIM Channel to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @param pData The source Buffer address. + * @param Length The length of data to be transferred from memory to TIM peripheral + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, const uint32_t *pData, + uint16_t Length) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); + + /* Set the TIM complementary channel state */ + if (TIM_CHANNEL_N_STATE_GET(htim, Channel) == HAL_TIM_CHANNEL_STATE_BUSY) + { + return HAL_BUSY; + } + else if (TIM_CHANNEL_N_STATE_GET(htim, Channel) == HAL_TIM_CHANNEL_STATE_READY) + { + if ((pData == NULL) || (Length == 0U)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + else + { + return HAL_ERROR; + } + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMADelayPulseNCplt; + htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAErrorCCxN ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)pData, (uint32_t)&htim->Instance->CCR1, + Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Capture/Compare 1 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMADelayPulseNCplt; + htim->hdma[TIM_DMA_ID_CC2]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAErrorCCxN ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)pData, (uint32_t)&htim->Instance->CCR2, + Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Capture/Compare 2 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMADelayPulseNCplt; + htim->hdma[TIM_DMA_ID_CC3]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAErrorCCxN ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)pData, (uint32_t)&htim->Instance->CCR3, + Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Capture/Compare 3 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC3); + break; + } + + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Enable the complementary PWM output */ + TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE); + + /* Enable the Main Output */ + __HAL_TIM_MOE_ENABLE(htim); + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + } + + /* Return function status */ + return status; +} + +/** + * @brief Stops the TIM PWM signal generation in DMA mode on the complementary + * output + * @param htim TIM handle + * @param Channel TIM Channel to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Disable the TIM Capture/Compare 1 DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]); + break; + } + + case TIM_CHANNEL_2: + { + /* Disable the TIM Capture/Compare 2 DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC2]); + break; + } + + case TIM_CHANNEL_3: + { + /* Disable the TIM Capture/Compare 3 DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC3); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC3]); + break; + } + + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Disable the complementary PWM output */ + TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE); + + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM complementary channel state */ + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + } + + /* Return function status */ + return status; +} + +/** + * @} + */ + +/** @defgroup TIMEx_Exported_Functions_Group4 Extended Timer Complementary One Pulse functions + * @brief Timer Complementary One Pulse functions + * +@verbatim + ============================================================================== + ##### Timer Complementary One Pulse functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+) Start the Complementary One Pulse generation. + (+) Stop the Complementary One Pulse. + (+) Start the Complementary One Pulse and enable interrupts. + (+) Stop the Complementary One Pulse and disable interrupts. + +@endverbatim + * @{ + */ + +/** + * @brief Starts the TIM One Pulse signal generation on the complementary + * output. + * @note OutputChannel must match the pulse output channel chosen when calling + * @ref HAL_TIM_OnePulse_ConfigChannel(). + * @param htim TIM One Pulse handle + * @param OutputChannel pulse output channel to enable + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start(TIM_HandleTypeDef *htim, uint32_t OutputChannel) +{ + uint32_t input_channel = (OutputChannel == TIM_CHANNEL_1) ? TIM_CHANNEL_2 : TIM_CHANNEL_1; + HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef channel_2_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_2); + HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef complementary_channel_2_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_2); + + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, OutputChannel)); + + /* Check the TIM channels state */ + if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (channel_2_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + + /* Set the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + + /* Enable the complementary One Pulse output channel and the Input Capture channel */ + TIM_CCxNChannelCmd(htim->Instance, OutputChannel, TIM_CCxN_ENABLE); + TIM_CCxChannelCmd(htim->Instance, input_channel, TIM_CCx_ENABLE); + + /* Enable the Main Output */ + __HAL_TIM_MOE_ENABLE(htim); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM One Pulse signal generation on the complementary + * output. + * @note OutputChannel must match the pulse output channel chosen when calling + * @ref HAL_TIM_OnePulse_ConfigChannel(). + * @param htim TIM One Pulse handle + * @param OutputChannel pulse output channel to disable + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop(TIM_HandleTypeDef *htim, uint32_t OutputChannel) +{ + uint32_t input_channel = (OutputChannel == TIM_CHANNEL_1) ? TIM_CHANNEL_2 : TIM_CHANNEL_1; + + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, OutputChannel)); + + /* Disable the complementary One Pulse output channel and the Input Capture channel */ + TIM_CCxNChannelCmd(htim->Instance, OutputChannel, TIM_CCxN_DISABLE); + TIM_CCxChannelCmd(htim->Instance, input_channel, TIM_CCx_DISABLE); + + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the TIM One Pulse signal generation in interrupt mode on the + * complementary channel. + * @note OutputChannel must match the pulse output channel chosen when calling + * @ref HAL_TIM_OnePulse_ConfigChannel(). + * @param htim TIM One Pulse handle + * @param OutputChannel pulse output channel to enable + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel) +{ + uint32_t input_channel = (OutputChannel == TIM_CHANNEL_1) ? TIM_CHANNEL_2 : TIM_CHANNEL_1; + HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef channel_2_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_2); + HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef complementary_channel_2_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_2); + + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, OutputChannel)); + + /* Check the TIM channels state */ + if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (channel_2_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + + /* Set the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + + /* Enable the TIM Capture/Compare 1 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); + + /* Enable the TIM Capture/Compare 2 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2); + + /* Enable the complementary One Pulse output channel and the Input Capture channel */ + TIM_CCxNChannelCmd(htim->Instance, OutputChannel, TIM_CCxN_ENABLE); + TIM_CCxChannelCmd(htim->Instance, input_channel, TIM_CCx_ENABLE); + + /* Enable the Main Output */ + __HAL_TIM_MOE_ENABLE(htim); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM One Pulse signal generation in interrupt mode on the + * complementary channel. + * @note OutputChannel must match the pulse output channel chosen when calling + * @ref HAL_TIM_OnePulse_ConfigChannel(). + * @param htim TIM One Pulse handle + * @param OutputChannel pulse output channel to disable + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel) +{ + uint32_t input_channel = (OutputChannel == TIM_CHANNEL_1) ? TIM_CHANNEL_2 : TIM_CHANNEL_1; + + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, OutputChannel)); + + /* Disable the TIM Capture/Compare 1 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1); + + /* Disable the TIM Capture/Compare 2 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2); + + /* Disable the complementary One Pulse output channel and the Input Capture channel */ + TIM_CCxNChannelCmd(htim->Instance, OutputChannel, TIM_CCxN_DISABLE); + TIM_CCxChannelCmd(htim->Instance, input_channel, TIM_CCx_DISABLE); + + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @} + */ + +/** @defgroup TIMEx_Exported_Functions_Group5 Extended Peripheral Control functions + * @brief Peripheral Control functions + * +@verbatim + ============================================================================== + ##### Peripheral Control functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+) Configure the commutation event in case of use of the Hall sensor interface. + (+) Configure Output channels for OC and PWM mode. + + (+) Configure Complementary channels, break features and dead time. + (+) Configure Master synchronization. + (+) Configure timer remapping capabilities. + (+) Enable or disable channel grouping. + +@endverbatim + * @{ + */ + +/** + * @brief Configure the TIM commutation event sequence. + * @note This function is mandatory to use the commutation event in order to + * update the configuration at each commutation detection on the TRGI input of the Timer, + * the typical use of this feature is with the use of another Timer(interface Timer) + * configured in Hall sensor interface, this interface Timer will generate the + * commutation at its TRGO output (connected to Timer used in this function) each time + * the TI1 of the Interface Timer detect a commutation at its input TI1. + * @param htim TIM handle + * @param InputTrigger the Internal trigger corresponding to the Timer Interfacing with the Hall sensor + * This parameter can be one of the following values: + * @arg TIM_TS_ITR0: Internal trigger 0 selected + * @arg TIM_TS_ITR1: Internal trigger 1 selected + * @arg TIM_TS_ITR2: Internal trigger 2 selected + * @arg TIM_TS_ITR3: Internal trigger 3 selected + * @arg TIM_TS_NONE: No trigger is needed + * @param CommutationSource the Commutation Event source + * This parameter can be one of the following values: + * @arg TIM_COMMUTATION_TRGI: Commutation source is the TRGI of the Interface Timer + * @arg TIM_COMMUTATION_SOFTWARE: Commutation source is set by software using the COMG bit + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_ConfigCommutEvent(TIM_HandleTypeDef *htim, uint32_t InputTrigger, + uint32_t CommutationSource) +{ + /* Check the parameters */ + assert_param(IS_TIM_COMMUTATION_EVENT_INSTANCE(htim->Instance)); + assert_param(IS_TIM_INTERNAL_TRIGGEREVENT_SELECTION(InputTrigger)); + + __HAL_LOCK(htim); + + if ((InputTrigger == TIM_TS_ITR0) || (InputTrigger == TIM_TS_ITR1) || + (InputTrigger == TIM_TS_ITR2) || (InputTrigger == TIM_TS_ITR3)) + { + /* Select the Input trigger */ + htim->Instance->SMCR &= ~TIM_SMCR_TS; + htim->Instance->SMCR |= InputTrigger; + } + + /* Select the Capture Compare preload feature */ + htim->Instance->CR2 |= TIM_CR2_CCPC; + /* Select the Commutation event source */ + htim->Instance->CR2 &= ~TIM_CR2_CCUS; + htim->Instance->CR2 |= CommutationSource; + + /* Disable Commutation Interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_COM); + + /* Disable Commutation DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_COM); + + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Configure the TIM commutation event sequence with interrupt. + * @note This function is mandatory to use the commutation event in order to + * update the configuration at each commutation detection on the TRGI input of the Timer, + * the typical use of this feature is with the use of another Timer(interface Timer) + * configured in Hall sensor interface, this interface Timer will generate the + * commutation at its TRGO output (connected to Timer used in this function) each time + * the TI1 of the Interface Timer detect a commutation at its input TI1. + * @param htim TIM handle + * @param InputTrigger the Internal trigger corresponding to the Timer Interfacing with the Hall sensor + * This parameter can be one of the following values: + * @arg TIM_TS_ITR0: Internal trigger 0 selected + * @arg TIM_TS_ITR1: Internal trigger 1 selected + * @arg TIM_TS_ITR2: Internal trigger 2 selected + * @arg TIM_TS_ITR3: Internal trigger 3 selected + * @arg TIM_TS_NONE: No trigger is needed + * @param CommutationSource the Commutation Event source + * This parameter can be one of the following values: + * @arg TIM_COMMUTATION_TRGI: Commutation source is the TRGI of the Interface Timer + * @arg TIM_COMMUTATION_SOFTWARE: Commutation source is set by software using the COMG bit + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_ConfigCommutEvent_IT(TIM_HandleTypeDef *htim, uint32_t InputTrigger, + uint32_t CommutationSource) +{ + /* Check the parameters */ + assert_param(IS_TIM_COMMUTATION_EVENT_INSTANCE(htim->Instance)); + assert_param(IS_TIM_INTERNAL_TRIGGEREVENT_SELECTION(InputTrigger)); + + __HAL_LOCK(htim); + + if ((InputTrigger == TIM_TS_ITR0) || (InputTrigger == TIM_TS_ITR1) || + (InputTrigger == TIM_TS_ITR2) || (InputTrigger == TIM_TS_ITR3)) + { + /* Select the Input trigger */ + htim->Instance->SMCR &= ~TIM_SMCR_TS; + htim->Instance->SMCR |= InputTrigger; + } + + /* Select the Capture Compare preload feature */ + htim->Instance->CR2 |= TIM_CR2_CCPC; + /* Select the Commutation event source */ + htim->Instance->CR2 &= ~TIM_CR2_CCUS; + htim->Instance->CR2 |= CommutationSource; + + /* Disable Commutation DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_COM); + + /* Enable the Commutation Interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_COM); + + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Configure the TIM commutation event sequence with DMA. + * @note This function is mandatory to use the commutation event in order to + * update the configuration at each commutation detection on the TRGI input of the Timer, + * the typical use of this feature is with the use of another Timer(interface Timer) + * configured in Hall sensor interface, this interface Timer will generate the + * commutation at its TRGO output (connected to Timer used in this function) each time + * the TI1 of the Interface Timer detect a commutation at its input TI1. + * @note The user should configure the DMA in his own software, in This function only the COMDE bit is set + * @param htim TIM handle + * @param InputTrigger the Internal trigger corresponding to the Timer Interfacing with the Hall sensor + * This parameter can be one of the following values: + * @arg TIM_TS_ITR0: Internal trigger 0 selected + * @arg TIM_TS_ITR1: Internal trigger 1 selected + * @arg TIM_TS_ITR2: Internal trigger 2 selected + * @arg TIM_TS_ITR3: Internal trigger 3 selected + * @arg TIM_TS_NONE: No trigger is needed + * @param CommutationSource the Commutation Event source + * This parameter can be one of the following values: + * @arg TIM_COMMUTATION_TRGI: Commutation source is the TRGI of the Interface Timer + * @arg TIM_COMMUTATION_SOFTWARE: Commutation source is set by software using the COMG bit + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_ConfigCommutEvent_DMA(TIM_HandleTypeDef *htim, uint32_t InputTrigger, + uint32_t CommutationSource) +{ + /* Check the parameters */ + assert_param(IS_TIM_COMMUTATION_EVENT_INSTANCE(htim->Instance)); + assert_param(IS_TIM_INTERNAL_TRIGGEREVENT_SELECTION(InputTrigger)); + + __HAL_LOCK(htim); + + if ((InputTrigger == TIM_TS_ITR0) || (InputTrigger == TIM_TS_ITR1) || + (InputTrigger == TIM_TS_ITR2) || (InputTrigger == TIM_TS_ITR3)) + { + /* Select the Input trigger */ + htim->Instance->SMCR &= ~TIM_SMCR_TS; + htim->Instance->SMCR |= InputTrigger; + } + + /* Select the Capture Compare preload feature */ + htim->Instance->CR2 |= TIM_CR2_CCPC; + /* Select the Commutation event source */ + htim->Instance->CR2 &= ~TIM_CR2_CCUS; + htim->Instance->CR2 |= CommutationSource; + + /* Enable the Commutation DMA Request */ + /* Set the DMA Commutation Callback */ + htim->hdma[TIM_DMA_ID_COMMUTATION]->XferCpltCallback = TIMEx_DMACommutationCplt; + htim->hdma[TIM_DMA_ID_COMMUTATION]->XferHalfCpltCallback = TIMEx_DMACommutationHalfCplt; + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_COMMUTATION]->XferErrorCallback = TIM_DMAError; + + /* Disable Commutation Interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_COM); + + /* Enable the Commutation DMA Request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_COM); + + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Configures the TIM in master mode. + * @param htim TIM handle. + * @param sMasterConfig pointer to a TIM_MasterConfigTypeDef structure that + * contains the selected trigger output (TRGO) and the Master/Slave + * mode. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_MasterConfigSynchronization(TIM_HandleTypeDef *htim, + const TIM_MasterConfigTypeDef *sMasterConfig) +{ + uint32_t tmpcr2; + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_MASTER_INSTANCE(htim->Instance)); + assert_param(IS_TIM_TRGO_SOURCE(sMasterConfig->MasterOutputTrigger)); + assert_param(IS_TIM_MSM_STATE(sMasterConfig->MasterSlaveMode)); + + /* Check input state */ + __HAL_LOCK(htim); + + /* Change the handler state */ + htim->State = HAL_TIM_STATE_BUSY; + + /* Get the TIMx CR2 register value */ + tmpcr2 = htim->Instance->CR2; + + /* Get the TIMx SMCR register value */ + tmpsmcr = htim->Instance->SMCR; + + /* If the timer supports ADC synchronization through TRGO2, set the master mode selection 2 */ + if (IS_TIM_TRGO2_INSTANCE(htim->Instance)) + { + /* Check the parameters */ + assert_param(IS_TIM_TRGO2_SOURCE(sMasterConfig->MasterOutputTrigger2)); + + /* Clear the MMS2 bits */ + tmpcr2 &= ~TIM_CR2_MMS2; + /* Select the TRGO2 source*/ + tmpcr2 |= sMasterConfig->MasterOutputTrigger2; + } + + /* Reset the MMS Bits */ + tmpcr2 &= ~TIM_CR2_MMS; + /* Select the TRGO source */ + tmpcr2 |= sMasterConfig->MasterOutputTrigger; + + /* Update TIMx CR2 */ + htim->Instance->CR2 = tmpcr2; + + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + /* Reset the MSM Bit */ + tmpsmcr &= ~TIM_SMCR_MSM; + /* Set master mode */ + tmpsmcr |= sMasterConfig->MasterSlaveMode; + + /* Update TIMx SMCR */ + htim->Instance->SMCR = tmpsmcr; + } + + /* Change the htim state */ + htim->State = HAL_TIM_STATE_READY; + + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Configures the Break feature, dead time, Lock level, OSSI/OSSR State + * and the AOE(automatic output enable). + * @param htim TIM handle + * @param sBreakDeadTimeConfig pointer to a TIM_ConfigBreakDeadConfigTypeDef structure that + * contains the BDTR Register configuration information for the TIM peripheral. + * @note Interrupts can be generated when an active level is detected on the + * break input, the break 2 input or the system break input. Break + * interrupt can be enabled by calling the @ref __HAL_TIM_ENABLE_IT macro. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_ConfigBreakDeadTime(TIM_HandleTypeDef *htim, + const TIM_BreakDeadTimeConfigTypeDef *sBreakDeadTimeConfig) +{ + /* Keep this variable initialized to 0 as it is used to configure BDTR register */ + uint32_t tmpbdtr = 0U; + + /* Check the parameters */ + assert_param(IS_TIM_BREAK_INSTANCE(htim->Instance)); + assert_param(IS_TIM_OSSR_STATE(sBreakDeadTimeConfig->OffStateRunMode)); + assert_param(IS_TIM_OSSI_STATE(sBreakDeadTimeConfig->OffStateIDLEMode)); + assert_param(IS_TIM_LOCK_LEVEL(sBreakDeadTimeConfig->LockLevel)); + assert_param(IS_TIM_DEADTIME(sBreakDeadTimeConfig->DeadTime)); + assert_param(IS_TIM_BREAK_STATE(sBreakDeadTimeConfig->BreakState)); + assert_param(IS_TIM_BREAK_POLARITY(sBreakDeadTimeConfig->BreakPolarity)); + assert_param(IS_TIM_BREAK_FILTER(sBreakDeadTimeConfig->BreakFilter)); + assert_param(IS_TIM_AUTOMATIC_OUTPUT_STATE(sBreakDeadTimeConfig->AutomaticOutput)); + + /* Check input state */ + __HAL_LOCK(htim); + + /* Set the Lock level, the Break enable Bit and the Polarity, the OSSR State, + the OSSI State, the dead time value and the Automatic Output Enable Bit */ + + /* Set the BDTR bits */ + MODIFY_REG(tmpbdtr, TIM_BDTR_DTG, sBreakDeadTimeConfig->DeadTime); + MODIFY_REG(tmpbdtr, TIM_BDTR_LOCK, sBreakDeadTimeConfig->LockLevel); + MODIFY_REG(tmpbdtr, TIM_BDTR_OSSI, sBreakDeadTimeConfig->OffStateIDLEMode); + MODIFY_REG(tmpbdtr, TIM_BDTR_OSSR, sBreakDeadTimeConfig->OffStateRunMode); + MODIFY_REG(tmpbdtr, TIM_BDTR_BKE, sBreakDeadTimeConfig->BreakState); + MODIFY_REG(tmpbdtr, TIM_BDTR_BKP, sBreakDeadTimeConfig->BreakPolarity); + MODIFY_REG(tmpbdtr, TIM_BDTR_AOE, sBreakDeadTimeConfig->AutomaticOutput); + MODIFY_REG(tmpbdtr, TIM_BDTR_BKF, (sBreakDeadTimeConfig->BreakFilter << TIM_BDTR_BKF_Pos)); + + if (IS_TIM_BKIN2_INSTANCE(htim->Instance)) + { + /* Check the parameters */ + assert_param(IS_TIM_BREAK2_STATE(sBreakDeadTimeConfig->Break2State)); + assert_param(IS_TIM_BREAK2_POLARITY(sBreakDeadTimeConfig->Break2Polarity)); + assert_param(IS_TIM_BREAK_FILTER(sBreakDeadTimeConfig->Break2Filter)); + + /* Set the BREAK2 input related BDTR bits */ + MODIFY_REG(tmpbdtr, TIM_BDTR_BK2F, (sBreakDeadTimeConfig->Break2Filter << TIM_BDTR_BK2F_Pos)); + MODIFY_REG(tmpbdtr, TIM_BDTR_BK2E, sBreakDeadTimeConfig->Break2State); + MODIFY_REG(tmpbdtr, TIM_BDTR_BK2P, sBreakDeadTimeConfig->Break2Polarity); + } + + /* Set TIMx_BDTR */ + htim->Instance->BDTR = tmpbdtr; + + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Configures the break input source. + * @param htim TIM handle. + * @param BreakInput Break input to configure + * This parameter can be one of the following values: + * @arg TIM_BREAKINPUT_BRK: Timer break input + * @arg TIM_BREAKINPUT_BRK2: Timer break 2 input + * @param sBreakInputConfig Break input source configuration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_ConfigBreakInput(TIM_HandleTypeDef *htim, + uint32_t BreakInput, + const TIMEx_BreakInputConfigTypeDef *sBreakInputConfig) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t tmporx; + uint32_t bkin_enable_mask; + uint32_t bkin_polarity_mask; + uint32_t bkin_enable_bitpos; + uint32_t bkin_polarity_bitpos; + + /* Check the parameters */ + assert_param(IS_TIM_BREAK_INSTANCE(htim->Instance)); + assert_param(IS_TIM_BREAKINPUT(BreakInput)); + assert_param(IS_TIM_BREAKINPUTSOURCE(sBreakInputConfig->Source)); + assert_param(IS_TIM_BREAKINPUTSOURCE_STATE(sBreakInputConfig->Enable)); +#if defined(DFSDM1_Channel0) + if (sBreakInputConfig->Source != TIM_BREAKINPUTSOURCE_DFSDM1) + { + assert_param(IS_TIM_BREAKINPUTSOURCE_POLARITY(sBreakInputConfig->Polarity)); + } +#else + assert_param(IS_TIM_BREAKINPUTSOURCE_POLARITY(sBreakInputConfig->Polarity)); +#endif /* DFSDM1_Channel0 */ + + /* Check input state */ + __HAL_LOCK(htim); + + switch (sBreakInputConfig->Source) + { + case TIM_BREAKINPUTSOURCE_BKIN: + { + bkin_enable_mask = TIM1_OR2_BKINE; + bkin_enable_bitpos = TIM1_OR2_BKINE_Pos; + bkin_polarity_mask = TIM1_OR2_BKINP; + bkin_polarity_bitpos = TIM1_OR2_BKINP_Pos; + break; + } + case TIM_BREAKINPUTSOURCE_COMP1: + { + bkin_enable_mask = TIM1_OR2_BKCMP1E; + bkin_enable_bitpos = TIM1_OR2_BKCMP1E_Pos; + bkin_polarity_mask = TIM1_OR2_BKCMP1P; + bkin_polarity_bitpos = TIM1_OR2_BKCMP1P_Pos; + break; + } + case TIM_BREAKINPUTSOURCE_COMP2: + { + bkin_enable_mask = TIM1_OR2_BKCMP2E; + bkin_enable_bitpos = TIM1_OR2_BKCMP2E_Pos; + bkin_polarity_mask = TIM1_OR2_BKCMP2P; + bkin_polarity_bitpos = TIM1_OR2_BKCMP2P_Pos; + break; + } +#if defined(DFSDM1_Channel0) + case TIM_BREAKINPUTSOURCE_DFSDM1: + { + bkin_enable_mask = TIM1_OR2_BKDF1BK0E; + bkin_enable_bitpos = TIM1_OR2_BKDF1BK0E_Pos; + bkin_polarity_mask = 0U; + bkin_polarity_bitpos = 0U; + break; + } +#endif /* DFSDM1_Channel0 */ + + default: + { + bkin_enable_mask = 0U; + bkin_polarity_mask = 0U; + bkin_enable_bitpos = 0U; + bkin_polarity_bitpos = 0U; + break; + } + } + + switch (BreakInput) + { + case TIM_BREAKINPUT_BRK: + { + /* Get the TIMx_OR2 register value */ + tmporx = htim->Instance->OR2; + + /* Enable the break input */ + tmporx &= ~bkin_enable_mask; + tmporx |= (sBreakInputConfig->Enable << bkin_enable_bitpos) & bkin_enable_mask; + + /* Set the break input polarity */ +#if defined(DFSDM1_Channel0) + if (sBreakInputConfig->Source != TIM_BREAKINPUTSOURCE_DFSDM1) +#endif /* DFSDM1_Channel0 */ + { + tmporx &= ~bkin_polarity_mask; + tmporx |= (sBreakInputConfig->Polarity << bkin_polarity_bitpos) & bkin_polarity_mask; + } + + /* Set TIMx_OR2 */ + htim->Instance->OR2 = tmporx; + break; + } + case TIM_BREAKINPUT_BRK2: + { + /* Get the TIMx_OR3 register value */ + tmporx = htim->Instance->OR3; + + /* Enable the break input */ + tmporx &= ~bkin_enable_mask; + tmporx |= (sBreakInputConfig->Enable << bkin_enable_bitpos) & bkin_enable_mask; + + /* Set the break input polarity */ +#if defined(DFSDM1_Channel0) + if (sBreakInputConfig->Source != TIM_BREAKINPUTSOURCE_DFSDM1) +#endif /* DFSDM1_Channel0 */ + { + tmporx &= ~bkin_polarity_mask; + tmporx |= (sBreakInputConfig->Polarity << bkin_polarity_bitpos) & bkin_polarity_mask; + } + + /* Set TIMx_OR3 */ + htim->Instance->OR3 = tmporx; + break; + } + default: + status = HAL_ERROR; + break; + } + + __HAL_UNLOCK(htim); + + return status; +} + +/** + * @brief Configures the TIMx Remapping input capabilities. + * @param htim TIM handle. + * @param Remap specifies the TIM remapping source. + @if STM32L422xx + * For TIM1, the parameter is a combination of 2 fields (field1 | field2): + * + * field1 can have the following values: + * @arg TIM_TIM1_ETR_ADC1_NONE: TIM1_ETR is not connected to any ADC1 AWD (analog watchdog) + * @arg TIM_TIM1_ETR_ADC1_AWD1: TIM1_ETR is connected to ADC1 AWD1 + * @arg TIM_TIM1_ETR_ADC1_AWD2: TIM1_ETR is connected to ADC1 AWD2 + * @arg TIM_TIM1_ETR_ADC1_AWD3: TIM1_ETR is connected to ADC1 AWD3 + * + * field2 can have the following values: + * @arg TIM_TIM1_TI1_GPIO: TIM1 TI1 is connected to GPIO + * @arg TIM_TIM1_TI1_COMP1: TIM1 TI1 is connected to COMP1 output + * + @endif +@if STM32L486xx + * For TIM1, the parameter is a combination of 4 fields (field1 | field2 | field3 | field4): + * + * field1 can have the following values: + * @arg TIM_TIM1_ETR_ADC1_NONE: TIM1_ETR is not connected to any ADC1 AWD (analog watchdog) + * @arg TIM_TIM1_ETR_ADC1_AWD1: TIM1_ETR is connected to ADC1 AWD1 + * @arg TIM_TIM1_ETR_ADC1_AWD2: TIM1_ETR is connected to ADC1 AWD2 + * @arg TIM_TIM1_ETR_ADC1_AWD3: TIM1_ETR is connected to ADC1 AWD3 + * + * field2 can have the following values: + * @arg TIM_TIM1_ETR_ADC3_NONE: TIM1_ETR is not connected to any ADC3 AWD (analog watchdog) + * @arg TIM_TIM1_ETR_ADC3_AWD1: TIM1_ETR is connected to ADC3 AWD1 + * @arg TIM_TIM1_ETR_ADC3_AWD2: TIM1_ETR is connected to ADC3 AWD2 + * @arg TIM_TIM1_ETR_ADC3_AWD3: TIM1_ETR is connected to ADC3 AWD3 + * + * field3 can have the following values: + * @arg TIM_TIM1_TI1_GPIO: TIM1 TI1 is connected to GPIO + * @arg TIM_TIM1_TI1_COMP1: TIM1 TI1 is connected to COMP1 output + * + * field4 can have the following values: + * @arg TIM_TIM1_ETR_COMP1: TIM1_ETR is connected to COMP1 output + * @arg TIM_TIM1_ETR_COMP2: TIM1_ETR is connected to COMP2 output + * @note When field4 is set to TIM_TIM1_ETR_COMP1 or TIM_TIM1_ETR_COMP2 field1 and field2 values are not significant + @endif + @if STM32L443xx + * For TIM1, the parameter is a combination of 3 fields (field1 | field2 | field3): + * + * field1 can have the following values: + * @arg TIM_TIM1_ETR_ADC1_NONE: TIM1_ETR is not connected to any ADC1 AWD (analog watchdog) + * @arg TIM_TIM1_ETR_ADC1_AWD1: TIM1_ETR is connected to ADC1 AWD1 + * @arg TIM_TIM1_ETR_ADC1_AWD2: TIM1_ETR is connected to ADC1 AWD2 + * @arg TIM_TIM1_ETR_ADC1_AWD3: TIM1_ETR is connected to ADC1 AWD3 + * + * field2 can have the following values: + * @arg TIM_TIM1_TI1_GPIO: TIM1 TI1 is connected to GPIO + * @arg TIM_TIM1_TI1_COMP1: TIM1 TI1 is connected to COMP1 output + * + * field3 can have the following values: + * @arg TIM_TIM1_ETR_COMP1: TIM1_ETR is connected to COMP1 output + * @arg TIM_TIM1_ETR_COMP2: TIM1_ETR is connected to COMP2 output + * + * @note When field3 is set to TIM_TIM1_ETR_COMP1 or TIM_TIM1_ETR_COMP2 field1 values is not significant + * + @endif + @if STM32L486xx + * For TIM2, the parameter is a combination of 3 fields (field1 | field2 | field3): + * + * field1 can have the following values: + * @arg TIM_TIM2_ITR1_TIM8_TRGO: TIM2_ITR1 is connected to TIM8_TRGO + * @arg TIM_TIM2_ITR1_OTG_FS_SOF: TIM2_ITR1 is connected to OTG_FS SOF + * + * field2 can have the following values: + * @arg TIM_TIM2_ETR_GPIO: TIM2_ETR is connected to GPIO + * @arg TIM_TIM2_ETR_LSE: TIM2_ETR is connected to LSE + * @arg TIM_TIM2_ETR_COMP1: TIM2_ETR is connected to COMP1 output + * @arg TIM_TIM2_ETR_COMP2: TIM2_ETR is connected to COMP2 output + * + * field3 can have the following values: + * @arg TIM_TIM2_TI4_GPIO: TIM2 TI4 is connected to GPIO + * @arg TIM_TIM2_TI4_COMP1: TIM2 TI4 is connected to COMP1 output + * @arg TIM_TIM2_TI4_COMP2: TIM2 TI4 is connected to COMP2 output + * @arg TIM_TIM2_TI4_COMP1_COMP2: TIM2 TI4 is connected to logical OR between COMP1 and COMP2 output + @endif + @if STM32L422xx + * For TIM2, the parameter is a combination of 3 fields (field1 | field2 | field3): + * + * field1 can have the following values: + * @arg TIM_TIM2_ITR1_NONE: No internal trigger on TIM2_ITR1 + * @arg TIM_TIM2_ITR1_USB_SOF: TIM2_ITR1 is connected to USB SOF + * + * field2 can have the following values: + * @arg TIM_TIM2_ETR_GPIO: TIM2_ETR is connected to GPIO + * @arg TIM_TIM2_ETR_LSE: TIM2_ETR is connected to LSE + * @arg TIM_TIM2_ETR_COMP1: TIM2_ETR is connected to COMP1 output + * + * field3 can have the following values: + * @arg TIM_TIM2_TI4_GPIO: TIM2 TI4 is connected to GPIO + * @arg TIM_TIM2_TI4_COMP1: TIM2 TI4 is connected to COMP1 output + * + @endif + @if STM32L443xx + * For TIM2, the parameter is a combination of 3 fields (field1 | field2 | field3): + * + * field1 can have the following values: + * @arg TIM_TIM2_ITR1_NONE: No internal trigger on TIM2_ITR1 + * @arg TIM_TIM2_ITR1_USB_SOF: TIM2_ITR1 is connected to USB SOF + * + * field2 can have the following values: + * @arg TIM_TIM2_ETR_GPIO: TIM2_ETR is connected to GPIO + * @arg TIM_TIM2_ETR_LSE: TIM2_ETR is connected to LSE + * @arg TIM_TIM2_ETR_COMP1: TIM2_ETR is connected to COMP1 output + * @arg TIM_TIM2_ETR_COMP2: TIM2_ETR is connected to COMP2 output + * + * field3 can have the following values: + * @arg TIM_TIM2_TI4_GPIO: TIM2 TI4 is connected to GPIO + * @arg TIM_TIM2_TI4_COMP1: TIM2 TI4 is connected to COMP1 output + * @arg TIM_TIM2_TI4_COMP2: TIM2 TI4 is connected to COMP2 output + * @arg TIM_TIM2_TI4_COMP1_COMP2: TIM2 TI4 is connected to logical OR between COMP1 and COMP2 output + * + @endif + @if STM32L486xx + * For TIM3, the parameter is a combination 2 fields(field1 | field2): + * + * field1 can have the following values: + * @arg TIM_TIM3_TI1_GPIO: TIM3 TI1 is connected to GPIO + * @arg TIM_TIM3_TI1_COMP1: TIM3 TI1 is connected to COMP1 output + * @arg TIM_TIM3_TI1_COMP2: TIM3 TI1 is connected to COMP2 output + * @arg TIM_TIM3_TI1_COMP1_COMP2: TIM3 TI1 is connected to logical OR between COMP1 and COMP2 output + * + * field2 can have the following values: + * @arg TIM_TIM3_ETR_GPIO: TIM3_ETR is connected to GPIO + * @arg TIM_TIM3_ETR_COMP1: TIM3_ETR is connected to COMP1 output + * + @endif + @if STM32L486xx + * For TIM8, the parameter is a combination of 3 fields (field1 | field2 | field3): + * + * field1 can have the following values: + * @arg TIM_TIM8_ETR_ADC2_NONE: TIM8_ETR is not connected to any ADC2 AWD (analog watchdog) + * @arg TIM_TIM8_ETR_ADC2_AWD1: TIM8_ETR is connected to ADC2 AWD1 + * @arg TIM_TIM8_ETR_ADC2_AWD2: TIM8_ETR is connected to ADC2 AWD2 + * @arg TIM_TIM8_ETR_ADC2_AWD3: TIM8_ETR is connected to ADC2 AWD3 + * + * field2 can have the following values: + * @arg TIM_TIM8_ETR_ADC3_NONE: TIM8_ETR is not connected to any ADC3 AWD (analog watchdog) + * @arg TIM_TIM8_ETR_ADC3_AWD1: TIM8_ETR is connected to ADC3 AWD1 + * @arg TIM_TIM8_ETR_ADC3_AWD2: TIM8_ETR is connected to ADC3 AWD2 + * @arg TIM_TIM8_ETR_ADC3_AWD3: TIM8_ETR is connected to ADC3 AWD3 + * + * field3 can have the following values: + * @arg TIM_TIM8_TI1_GPIO: TIM8 TI1 is connected to GPIO + * @arg TIM_TIM8_TI1_COMP2: TIM8 TI1 is connected to COMP2 output + * + * field4 can have the following values: + * @arg TIM_TIM8_ETR_COMP1: TIM8_ETR is connected to COMP1 output + * @arg TIM_TIM8_ETR_COMP2: TIM8_ETR is connected to COMP2 output + * @note When field4 is set to TIM_TIM8_ETR_COMP1 or TIM_TIM8_ETR_COMP2 field1 and field2 values are not significant + * + @endif + @if STM32L422xx + * For TIM15, the parameter is a combination of 2 fields (field1 | field2): + * + * field1 can have the following values: + * @arg TIM_TIM15_TI1_GPIO: TIM15 TI1 is connected to GPIO + * @arg TIM_TIM15_TI1_LSE: TIM15 TI1 is connected to LSE + * + * field2 can have the following values: + * @arg TIM_TIM15_ENCODERMODE_NONE: No redirection + * @arg TIM_TIM15_ENCODERMODE_TIM2: TIM2 IC1 and TIM2 IC2 are connected to TIM15 IC1 and TIM15 IC2 respectively + * + @endif + @if STM32L443xx + * For TIM15, the parameter is a combination of 2 fields (field1 | field2): + * + * field1 can have the following values: + * @arg TIM_TIM15_TI1_GPIO: TIM15 TI1 is connected to GPIO + * @arg TIM_TIM15_TI1_LSE: TIM15 TI1 is connected to LSE + * + * field2 can have the following values: + * @arg TIM_TIM15_ENCODERMODE_NONE: No redirection + * @arg TIM_TIM15_ENCODERMODE_TIM2: TIM2 IC1 and TIM2 IC2 are connected to TIM15 IC1 and TIM15 IC2 respectively + * @arg TIM_TIM15_ENCODERMODE_TIM3: TIM3 IC1 and TIM3 IC2 are connected to TIM15 IC1 and TIM15 IC2 respectively + * @arg TIM_TIM15_ENCODERMODE_TIM4: TIM4 IC1 and TIM4 IC2 are connected to TIM15 IC1 and TIM15 IC2 respectively + * + @endif + @if STM32L486xx + * @arg TIM_TIM16_TI1_GPIO: TIM16 TI1 is connected to GPIO + * @arg TIM_TIM16_TI1_LSI: TIM16 TI1 is connected to LSI + * @arg TIM_TIM16_TI1_LSE: TIM16 TI1 is connected to LSE + * @arg TIM_TIM16_TI1_RTC: TIM16 TI1 is connected to RTC wakeup interrupt + * + @endif + @if STM32L422xx + * For TIM16, the parameter can have the following values: + * @arg TIM_TIM16_TI1_GPIO: TIM16 TI1 is connected to GPIO + * @arg TIM_TIM16_TI1_LSI: TIM16 TI1 is connected to LSI + * @arg TIM_TIM16_TI1_LSE: TIM16 TI1 is connected to LSE + * @arg TIM_TIM16_TI1_RTC: TIM16 TI1 is connected to RTC wakeup interrupt + * @arg TIM_TIM16_TI1_MSI: TIM16 TI1 is connected to MSI (constraints: MSI clock < 1/4 TIM APB clock) + * @arg TIM_TIM16_TI1_HSE_32: TIM16 TI1 is connected to HSE div 32 (note that HSE div 32 must be selected as RTC clock source) + * @arg TIM_TIM16_TI1_MCO: TIM16 TI1 is connected to MCO + * + @endif + @if STM32L443xx + * For TIM16, the parameter can have the following values: + * @arg TIM_TIM16_TI1_GPIO: TIM16 TI1 is connected to GPIO + * @arg TIM_TIM16_TI1_LSI: TIM16 TI1 is connected to LSI + * @arg TIM_TIM16_TI1_LSE: TIM16 TI1 is connected to LSE + * @arg TIM_TIM16_TI1_RTC: TIM16 TI1 is connected to RTC wakeup interrupt + * @arg TIM_TIM16_TI1_MSI: TIM16 TI1 is connected to MSI (constraints: MSI clock < 1/4 TIM APB clock) + * @arg TIM_TIM16_TI1_HSE_32: TIM16 TI1 is connected to HSE div 32 (note that HSE div 32 must be selected as RTC clock source) + * @arg TIM_TIM16_TI1_MCO: TIM16 TI1 is connected to MCO + * + @endif + @if STM32L486xx + * For TIM17, the parameter can have the following values: + * @arg TIM_TIM17_TI1_GPIO: TIM17 TI1 is connected to GPIO + * @arg TIM_TIM17_TI1_MSI: TIM17 TI1 is connected to MSI (constraints: MSI clock < 1/4 TIM APB clock) + * @arg TIM_TIM17_TI1_HSE_32: TIM17 TI1 is connected to HSE div 32 + * @arg TIM_TIM17_TI1_MCO: TIM17 TI1 is connected to MCO + @endif + * + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_RemapConfig(TIM_HandleTypeDef *htim, uint32_t Remap) +{ + uint32_t tmpor1; + uint32_t tmpor2; + + /* Check parameters */ + assert_param(IS_TIM_REMAP_INSTANCE(htim->Instance)); + assert_param(IS_TIM_REMAP(Remap)); + + __HAL_LOCK(htim); + + /* Set ETR_SEL bit field (if required) */ + if (IS_TIM_ETRSEL_INSTANCE(htim->Instance)) + { + tmpor2 = htim->Instance->OR2; + tmpor2 &= ~TIM1_OR2_ETRSEL_Msk; + tmpor2 |= (Remap & TIM1_OR2_ETRSEL_Msk); + + /* Set TIMx_OR2 */ + htim->Instance->OR2 = tmpor2; + } + + /* Set other remapping capabilities */ + tmpor1 = Remap; + tmpor1 &= ~TIM1_OR2_ETRSEL_Msk; + + /* Set TIMx_OR1 */ + htim->Instance->OR1 = tmpor1; + + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Group channel 5 and channel 1, 2 or 3 + * @param htim TIM handle. + * @param Channels specifies the reference signal(s) the OC5REF is combined with. + * This parameter can be any combination of the following values: + * TIM_GROUPCH5_NONE: No effect of OC5REF on OC1REFC, OC2REFC and OC3REFC + * TIM_GROUPCH5_OC1REFC: OC1REFC is the logical AND of OC1REFC and OC5REF + * TIM_GROUPCH5_OC2REFC: OC2REFC is the logical AND of OC2REFC and OC5REF + * TIM_GROUPCH5_OC3REFC: OC3REFC is the logical AND of OC3REFC and OC5REF + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_GroupChannel5(TIM_HandleTypeDef *htim, uint32_t Channels) +{ + /* Check parameters */ + assert_param(IS_TIM_COMBINED3PHASEPWM_INSTANCE(htim->Instance)); + assert_param(IS_TIM_GROUPCH5(Channels)); + + /* Process Locked */ + __HAL_LOCK(htim); + + htim->State = HAL_TIM_STATE_BUSY; + + /* Clear GC5Cx bit fields */ + htim->Instance->CCR5 &= ~(TIM_CCR5_GC5C3 | TIM_CCR5_GC5C2 | TIM_CCR5_GC5C1); + + /* Set GC5Cx bit fields */ + htim->Instance->CCR5 |= Channels; + + /* Change the htim state */ + htim->State = HAL_TIM_STATE_READY; + + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @} + */ + +/** @defgroup TIMEx_Exported_Functions_Group6 Extended Callbacks functions + * @brief Extended Callbacks functions + * +@verbatim + ============================================================================== + ##### Extended Callbacks functions ##### + ============================================================================== + [..] + This section provides Extended TIM callback functions: + (+) Timer Commutation callback + (+) Timer Break callback + +@endverbatim + * @{ + */ + +/** + * @brief Commutation callback in non-blocking mode + * @param htim TIM handle + * @retval None + */ +__weak void HAL_TIMEx_CommutCallback(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIMEx_CommutCallback could be implemented in the user file + */ +} +/** + * @brief Commutation half complete callback in non-blocking mode + * @param htim TIM handle + * @retval None + */ +__weak void HAL_TIMEx_CommutHalfCpltCallback(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIMEx_CommutHalfCpltCallback could be implemented in the user file + */ +} + +/** + * @brief Break detection callback in non-blocking mode + * @param htim TIM handle + * @retval None + */ +__weak void HAL_TIMEx_BreakCallback(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIMEx_BreakCallback could be implemented in the user file + */ +} + +/** + * @brief Break2 detection callback in non blocking mode + * @param htim: TIM handle + * @retval None + */ +__weak void HAL_TIMEx_Break2Callback(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_TIMEx_Break2Callback could be implemented in the user file + */ +} +/** + * @} + */ + +/** @defgroup TIMEx_Exported_Functions_Group7 Extended Peripheral State functions + * @brief Extended Peripheral State functions + * +@verbatim + ============================================================================== + ##### Extended Peripheral State functions ##### + ============================================================================== + [..] + This subsection permits to get in run-time the status of the peripheral + and the data flow. + +@endverbatim + * @{ + */ + +/** + * @brief Return the TIM Hall Sensor interface handle state. + * @param htim TIM Hall Sensor handle + * @retval HAL state + */ +HAL_TIM_StateTypeDef HAL_TIMEx_HallSensor_GetState(const TIM_HandleTypeDef *htim) +{ + return htim->State; +} + +/** + * @brief Return actual state of the TIM complementary channel. + * @param htim TIM handle + * @param ChannelN TIM Complementary channel + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 + * @arg TIM_CHANNEL_2: TIM Channel 2 + * @arg TIM_CHANNEL_3: TIM Channel 3 + * @retval TIM Complementary channel state + */ +HAL_TIM_ChannelStateTypeDef HAL_TIMEx_GetChannelNState(const TIM_HandleTypeDef *htim, uint32_t ChannelN) +{ + HAL_TIM_ChannelStateTypeDef channel_state; + + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, ChannelN)); + + channel_state = TIM_CHANNEL_N_STATE_GET(htim, ChannelN); + + return channel_state; +} +/** + * @} + */ + +/** + * @} + */ + +/* Private functions ---------------------------------------------------------*/ +/** @defgroup TIMEx_Private_Functions TIM Extended Private Functions + * @{ + */ + +/** + * @brief TIM DMA Commutation callback. + * @param hdma pointer to DMA handle. + * @retval None + */ +void TIMEx_DMACommutationCplt(DMA_HandleTypeDef *hdma) +{ + TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + /* Change the htim state */ + htim->State = HAL_TIM_STATE_READY; + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->CommutationCallback(htim); +#else + HAL_TIMEx_CommutCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ +} + +/** + * @brief TIM DMA Commutation half complete callback. + * @param hdma pointer to DMA handle. + * @retval None + */ +void TIMEx_DMACommutationHalfCplt(DMA_HandleTypeDef *hdma) +{ + TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + /* Change the htim state */ + htim->State = HAL_TIM_STATE_READY; + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->CommutationHalfCpltCallback(htim); +#else + HAL_TIMEx_CommutHalfCpltCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ +} + + +/** + * @brief TIM DMA Delay Pulse complete callback (complementary channel). + * @param hdma pointer to DMA handle. + * @retval None + */ +static void TIM_DMADelayPulseNCplt(DMA_HandleTypeDef *hdma) +{ + TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + if (hdma == htim->hdma[TIM_DMA_ID_CC1]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1; + + if (hdma->Init.Mode == DMA_NORMAL) + { + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + } + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC2]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2; + + if (hdma->Init.Mode == DMA_NORMAL) + { + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + } + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC3]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3; + + if (hdma->Init.Mode == DMA_NORMAL) + { + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_3, HAL_TIM_CHANNEL_STATE_READY); + } + } + else + { + /* nothing to do */ + } + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->PWM_PulseFinishedCallback(htim); +#else + HAL_TIM_PWM_PulseFinishedCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; +} + +/** + * @brief TIM DMA error callback (complementary channel) + * @param hdma pointer to DMA handle. + * @retval None + */ +static void TIM_DMAErrorCCxN(DMA_HandleTypeDef *hdma) +{ + TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + if (hdma == htim->hdma[TIM_DMA_ID_CC1]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1; + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC2]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2; + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC3]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3; + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_3, HAL_TIM_CHANNEL_STATE_READY); + } + else + { + /* nothing to do */ + } + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->ErrorCallback(htim); +#else + HAL_TIM_ErrorCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; +} + +/** + * @brief Enables or disables the TIM Capture Compare Channel xN. + * @param TIMx to select the TIM peripheral + * @param Channel specifies the TIM Channel + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 + * @arg TIM_CHANNEL_2: TIM Channel 2 + * @arg TIM_CHANNEL_3: TIM Channel 3 + * @param ChannelNState specifies the TIM Channel CCxNE bit new state. + * This parameter can be: TIM_CCxN_ENABLE or TIM_CCxN_Disable. + * @retval None + */ +static void TIM_CCxNChannelCmd(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t ChannelNState) +{ + uint32_t tmp; + + tmp = TIM_CCER_CC1NE << (Channel & 0xFU); /* 0xFU = 15 bits max shift */ + + /* Reset the CCxNE Bit */ + TIMx->CCER &= ~tmp; + + /* Set or reset the CCxNE Bit */ + TIMx->CCER |= (uint32_t)(ChannelNState << (Channel & 0xFU)); /* 0xFU = 15 bits max shift */ +} +/** + * @} + */ + +#endif /* HAL_TIM_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ diff --git a/CablePositioning_IAP_V1.0/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.c b/CablePositioning_IAP_V1.0/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.c index 143bc6a..c5c33c7 100644 --- a/CablePositioning_IAP_V1.0/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.c +++ b/CablePositioning_IAP_V1.0/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.c @@ -1,4840 +1,4919 @@ -/** - ****************************************************************************** - * @file stm32l4xx_hal_uart.c - * @author MCD Application Team - * @brief UART HAL module driver. - * This file provides firmware functions to manage the following - * functionalities of the Universal Asynchronous Receiver Transmitter Peripheral (UART). - * + Initialization and de-initialization functions - * + IO operation functions - * + Peripheral Control functions - * - * - ****************************************************************************** - * @attention - * - * Copyright (c) 2017 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - @verbatim - =============================================================================== - ##### How to use this driver ##### - =============================================================================== - [..] - The UART HAL driver can be used as follows: - - (#) Declare a UART_HandleTypeDef handle structure (eg. UART_HandleTypeDef huart). - (#) Initialize the UART low level resources by implementing the HAL_UART_MspInit() API: - (++) Enable the USARTx interface clock. - (++) UART pins configuration: - (+++) Enable the clock for the UART GPIOs. - (+++) Configure these UART pins as alternate function pull-up. - (++) NVIC configuration if you need to use interrupt process (HAL_UART_Transmit_IT() - and HAL_UART_Receive_IT() APIs): - (+++) Configure the USARTx interrupt priority. - (+++) Enable the NVIC USART IRQ handle. - (++) UART interrupts handling: - -@@- The specific UART interrupts (Transmission complete interrupt, - RXNE interrupt, RX/TX FIFOs related interrupts and Error Interrupts) - are managed using the macros __HAL_UART_ENABLE_IT() and __HAL_UART_DISABLE_IT() - inside the transmit and receive processes. - (++) DMA Configuration if you need to use DMA process (HAL_UART_Transmit_DMA() - and HAL_UART_Receive_DMA() APIs): - (+++) Declare a DMA handle structure for the Tx/Rx channel. - (+++) Enable the DMAx interface clock. - (+++) Configure the declared DMA handle structure with the required Tx/Rx parameters. - (+++) Configure the DMA Tx/Rx channel. - (+++) Associate the initialized DMA handle to the UART DMA Tx/Rx handle. - (+++) Configure the priority and enable the NVIC for the transfer complete - interrupt on the DMA Tx/Rx channel. - - (#) Program the Baud Rate, Word Length, Stop Bit, Parity, Prescaler value , Hardware - flow control and Mode (Receiver/Transmitter) in the huart handle Init structure. - - (#) If required, program UART advanced features (TX/RX pins swap, auto Baud rate detection,...) - in the huart handle AdvancedInit structure. - - (#) For the UART asynchronous mode, initialize the UART registers by calling - the HAL_UART_Init() API. - - (#) For the UART Half duplex mode, initialize the UART registers by calling - the HAL_HalfDuplex_Init() API. - - (#) For the UART LIN (Local Interconnection Network) mode, initialize the UART registers - by calling the HAL_LIN_Init() API. - - (#) For the UART Multiprocessor mode, initialize the UART registers - by calling the HAL_MultiProcessor_Init() API. - - (#) For the UART RS485 Driver Enabled mode, initialize the UART registers - by calling the HAL_RS485Ex_Init() API. - - [..] - (@) These API's (HAL_UART_Init(), HAL_HalfDuplex_Init(), HAL_LIN_Init(), HAL_MultiProcessor_Init(), - also configure the low level Hardware GPIO, CLOCK, CORTEX...etc) by - calling the customized HAL_UART_MspInit() API. - - ##### Callback registration ##### - ================================== - - [..] - The compilation define USE_HAL_UART_REGISTER_CALLBACKS when set to 1 - allows the user to configure dynamically the driver callbacks. - - [..] - Use Function HAL_UART_RegisterCallback() to register a user callback. - Function HAL_UART_RegisterCallback() allows to register following callbacks: - (+) TxHalfCpltCallback : Tx Half Complete Callback. - (+) TxCpltCallback : Tx Complete Callback. - (+) RxHalfCpltCallback : Rx Half Complete Callback. - (+) RxCpltCallback : Rx Complete Callback. - (+) ErrorCallback : Error Callback. - (+) AbortCpltCallback : Abort Complete Callback. - (+) AbortTransmitCpltCallback : Abort Transmit Complete Callback. - (+) AbortReceiveCpltCallback : Abort Receive Complete Callback. - (+) WakeupCallback : Wakeup Callback. -#if defined(USART_CR1_FIFOEN) - (+) RxFifoFullCallback : Rx Fifo Full Callback. - (+) TxFifoEmptyCallback : Tx Fifo Empty Callback. -#endif - (+) MspInitCallback : UART MspInit. - (+) MspDeInitCallback : UART MspDeInit. - This function takes as parameters the HAL peripheral handle, the Callback ID - and a pointer to the user callback function. - - [..] - Use function HAL_UART_UnRegisterCallback() to reset a callback to the default - weak (surcharged) function. - HAL_UART_UnRegisterCallback() takes as parameters the HAL peripheral handle, - and the Callback ID. - This function allows to reset following callbacks: - (+) TxHalfCpltCallback : Tx Half Complete Callback. - (+) TxCpltCallback : Tx Complete Callback. - (+) RxHalfCpltCallback : Rx Half Complete Callback. - (+) RxCpltCallback : Rx Complete Callback. - (+) ErrorCallback : Error Callback. - (+) AbortCpltCallback : Abort Complete Callback. - (+) AbortTransmitCpltCallback : Abort Transmit Complete Callback. - (+) AbortReceiveCpltCallback : Abort Receive Complete Callback. - (+) WakeupCallback : Wakeup Callback. -#if defined(USART_CR1_FIFOEN) - (+) RxFifoFullCallback : Rx Fifo Full Callback. - (+) TxFifoEmptyCallback : Tx Fifo Empty Callback. -#endif - (+) MspInitCallback : UART MspInit. - (+) MspDeInitCallback : UART MspDeInit. - - [..] - For specific callback RxEventCallback, use dedicated registration/reset functions: - respectively HAL_UART_RegisterRxEventCallback() , HAL_UART_UnRegisterRxEventCallback(). - - [..] - By default, after the HAL_UART_Init() and when the state is HAL_UART_STATE_RESET - all callbacks are set to the corresponding weak (surcharged) functions: - examples HAL_UART_TxCpltCallback(), HAL_UART_RxHalfCpltCallback(). - Exception done for MspInit and MspDeInit functions that are respectively - reset to the legacy weak (surcharged) functions in the HAL_UART_Init() - and HAL_UART_DeInit() only when these callbacks are null (not registered beforehand). - If not, MspInit or MspDeInit are not null, the HAL_UART_Init() and HAL_UART_DeInit() - keep and use the user MspInit/MspDeInit callbacks (registered beforehand). - - [..] - Callbacks can be registered/unregistered in HAL_UART_STATE_READY state only. - Exception done MspInit/MspDeInit that can be registered/unregistered - in HAL_UART_STATE_READY or HAL_UART_STATE_RESET state, thus registered (user) - MspInit/DeInit callbacks can be used during the Init/DeInit. - In that case first register the MspInit/MspDeInit user callbacks - using HAL_UART_RegisterCallback() before calling HAL_UART_DeInit() - or HAL_UART_Init() function. - - [..] - When The compilation define USE_HAL_UART_REGISTER_CALLBACKS is set to 0 or - not defined, the callback registration feature is not available - and weak (surcharged) callbacks are used. - - - @endverbatim - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32l4xx_hal.h" - -/** @addtogroup STM32L4xx_HAL_Driver - * @{ - */ - -/** @defgroup UART UART - * @brief HAL UART module driver - * @{ - */ - -#ifdef HAL_UART_MODULE_ENABLED - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -/** @defgroup UART_Private_Constants UART Private Constants - * @{ - */ -#if defined(USART_CR1_FIFOEN) -#define USART_CR1_FIELDS ((uint32_t)(USART_CR1_M | USART_CR1_PCE | USART_CR1_PS | USART_CR1_TE | USART_CR1_RE | \ - USART_CR1_OVER8 | USART_CR1_FIFOEN)) /*!< UART or USART CR1 fields of parameters set by UART_SetConfig API */ -#else -#define USART_CR1_FIELDS ((uint32_t)(USART_CR1_M | USART_CR1_PCE | USART_CR1_PS | USART_CR1_TE | USART_CR1_RE | \ - USART_CR1_OVER8)) /*!< UART or USART CR1 fields of parameters set by UART_SetConfig API */ -#endif /* USART_CR1_FIFOEN */ - -#if defined(USART_CR1_FIFOEN) -#define USART_CR3_FIELDS ((uint32_t)(USART_CR3_RTSE | USART_CR3_CTSE | USART_CR3_ONEBIT | USART_CR3_TXFTCFG | \ - USART_CR3_RXFTCFG)) /*!< UART or USART CR3 fields of parameters set by UART_SetConfig API */ -#else -#define USART_CR3_FIELDS ((uint32_t)(USART_CR3_RTSE | USART_CR3_CTSE |\ - USART_CR3_ONEBIT)) /*!< UART or USART CR3 fields of parameters set by UART_SetConfig API */ -#endif /* USART_CR1_FIFOEN */ - -#define LPUART_BRR_MIN 0x00000300U /* LPUART BRR minimum authorized value */ -#define LPUART_BRR_MAX 0x000FFFFFU /* LPUART BRR maximum authorized value */ - -#define UART_BRR_MIN 0x10U /* UART BRR minimum authorized value */ -#define UART_BRR_MAX 0x0000FFFFU /* UART BRR maximum authorized value */ -/** - * @} - */ - -/* Private macros ------------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ -/** @addtogroup UART_Private_Functions - * @{ - */ -static void UART_EndTxTransfer(UART_HandleTypeDef *huart); -static void UART_EndRxTransfer(UART_HandleTypeDef *huart); -static void UART_DMATransmitCplt(DMA_HandleTypeDef *hdma); -static void UART_DMAReceiveCplt(DMA_HandleTypeDef *hdma); -static void UART_DMARxHalfCplt(DMA_HandleTypeDef *hdma); -static void UART_DMATxHalfCplt(DMA_HandleTypeDef *hdma); -static void UART_DMAError(DMA_HandleTypeDef *hdma); -static void UART_DMAAbortOnError(DMA_HandleTypeDef *hdma); -static void UART_DMATxAbortCallback(DMA_HandleTypeDef *hdma); -static void UART_DMARxAbortCallback(DMA_HandleTypeDef *hdma); -static void UART_DMATxOnlyAbortCallback(DMA_HandleTypeDef *hdma); -static void UART_DMARxOnlyAbortCallback(DMA_HandleTypeDef *hdma); -static void UART_TxISR_8BIT(UART_HandleTypeDef *huart); -static void UART_TxISR_16BIT(UART_HandleTypeDef *huart); -#if defined(USART_CR1_FIFOEN) -static void UART_TxISR_8BIT_FIFOEN(UART_HandleTypeDef *huart); -static void UART_TxISR_16BIT_FIFOEN(UART_HandleTypeDef *huart); -#endif /* USART_CR1_FIFOEN */ -static void UART_EndTransmit_IT(UART_HandleTypeDef *huart); -static void UART_RxISR_8BIT(UART_HandleTypeDef *huart); -static void UART_RxISR_16BIT(UART_HandleTypeDef *huart); -#if defined(USART_CR1_FIFOEN) -static void UART_RxISR_8BIT_FIFOEN(UART_HandleTypeDef *huart); -static void UART_RxISR_16BIT_FIFOEN(UART_HandleTypeDef *huart); -#endif /* USART_CR1_FIFOEN */ -/** - * @} - */ - -/* Private variables ---------------------------------------------------------*/ -#if defined(USART_PRESC_PRESCALER) -/** @addtogroup UART_Private_variables - * @{ - */ -const uint16_t UARTPrescTable[12] = {1U, 2U, 4U, 6U, 8U, 10U, 12U, 16U, 32U, 64U, 128U, 256U}; -/** - * @} - */ - -#endif /* USART_PRESC_PRESCALER */ -/* Exported Constants --------------------------------------------------------*/ -/* Exported functions --------------------------------------------------------*/ - -/** @defgroup UART_Exported_Functions UART Exported Functions - * @{ - */ - -/** @defgroup UART_Exported_Functions_Group1 Initialization and de-initialization functions - * @brief Initialization and Configuration functions - * -@verbatim -=============================================================================== - ##### Initialization and Configuration functions ##### - =============================================================================== - [..] - This subsection provides a set of functions allowing to initialize the USARTx or the UARTy - in asynchronous mode. - (+) For the asynchronous mode the parameters below can be configured: - (++) Baud Rate - (++) Word Length - (++) Stop Bit - (++) Parity: If the parity is enabled, then the MSB bit of the data written - in the data register is transmitted but is changed by the parity bit. - (++) Hardware flow control - (++) Receiver/transmitter modes - (++) Over Sampling Method - (++) One-Bit Sampling Method - (+) For the asynchronous mode, the following advanced features can be configured as well: - (++) TX and/or RX pin level inversion - (++) data logical level inversion - (++) RX and TX pins swap - (++) RX overrun detection disabling - (++) DMA disabling on RX error - (++) MSB first on communication line - (++) auto Baud rate detection - [..] - The HAL_UART_Init(), HAL_HalfDuplex_Init(), HAL_LIN_Init()and HAL_MultiProcessor_Init()API - follow respectively the UART asynchronous, UART Half duplex, UART LIN mode - and UART multiprocessor mode configuration procedures (details for the procedures - are available in reference manual). - -@endverbatim - - Depending on the frame length defined by the M1 and M0 bits (7-bit, - 8-bit or 9-bit), the possible UART formats are listed in the - following table. - - Table 1. UART frame format. - +-----------------------------------------------------------------------+ - | M1 bit | M0 bit | PCE bit | UART frame | - |---------|---------|-----------|---------------------------------------| - | 0 | 0 | 0 | | SB | 8 bit data | STB | | - |---------|---------|-----------|---------------------------------------| - | 0 | 0 | 1 | | SB | 7 bit data | PB | STB | | - |---------|---------|-----------|---------------------------------------| - | 0 | 1 | 0 | | SB | 9 bit data | STB | | - |---------|---------|-----------|---------------------------------------| - | 0 | 1 | 1 | | SB | 8 bit data | PB | STB | | - |---------|---------|-----------|---------------------------------------| - | 1 | 0 | 0 | | SB | 7 bit data | STB | | - |---------|---------|-----------|---------------------------------------| - | 1 | 0 | 1 | | SB | 6 bit data | PB | STB | | - +-----------------------------------------------------------------------+ - - * @{ - */ - -/** - * @brief Initialize the UART mode according to the specified - * parameters in the UART_InitTypeDef and initialize the associated handle. - * @param huart UART handle. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_UART_Init(UART_HandleTypeDef *huart) -{ - /* Check the UART handle allocation */ - if (huart == NULL) - { - return HAL_ERROR; - } - - if (huart->Init.HwFlowCtl != UART_HWCONTROL_NONE) - { - /* Check the parameters */ - assert_param(IS_UART_HWFLOW_INSTANCE(huart->Instance)); - } - else - { - /* Check the parameters */ - assert_param((IS_UART_INSTANCE(huart->Instance)) || (IS_LPUART_INSTANCE(huart->Instance))); - } - - if (huart->gState == HAL_UART_STATE_RESET) - { - /* Allocate lock resource and initialize it */ - huart->Lock = HAL_UNLOCKED; - -#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) - UART_InitCallbacksToDefault(huart); - - if (huart->MspInitCallback == NULL) - { - huart->MspInitCallback = HAL_UART_MspInit; - } - - /* Init the low level hardware */ - huart->MspInitCallback(huart); -#else - /* Init the low level hardware : GPIO, CLOCK */ - HAL_UART_MspInit(huart); -#endif /* (USE_HAL_UART_REGISTER_CALLBACKS) */ - } - - huart->gState = HAL_UART_STATE_BUSY; - - __HAL_UART_DISABLE(huart); - - /* Set the UART Communication parameters */ - if (UART_SetConfig(huart) == HAL_ERROR) - { - return HAL_ERROR; - } - - if (huart->AdvancedInit.AdvFeatureInit != UART_ADVFEATURE_NO_INIT) - { - UART_AdvFeatureConfig(huart); - } - - /* In asynchronous mode, the following bits must be kept cleared: - - LINEN and CLKEN bits in the USART_CR2 register, - - SCEN, HDSEL and IREN bits in the USART_CR3 register.*/ - CLEAR_BIT(huart->Instance->CR2, (USART_CR2_LINEN | USART_CR2_CLKEN)); - CLEAR_BIT(huart->Instance->CR3, (USART_CR3_SCEN | USART_CR3_HDSEL | USART_CR3_IREN)); - - __HAL_UART_ENABLE(huart); - - /* TEACK and/or REACK to check before moving huart->gState and huart->RxState to Ready */ - return (UART_CheckIdleState(huart)); -} - -/** - * @brief Initialize the half-duplex mode according to the specified - * parameters in the UART_InitTypeDef and creates the associated handle. - * @param huart UART handle. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_HalfDuplex_Init(UART_HandleTypeDef *huart) -{ - /* Check the UART handle allocation */ - if (huart == NULL) - { - return HAL_ERROR; - } - - /* Check UART instance */ - assert_param(IS_UART_HALFDUPLEX_INSTANCE(huart->Instance)); - - if (huart->gState == HAL_UART_STATE_RESET) - { - /* Allocate lock resource and initialize it */ - huart->Lock = HAL_UNLOCKED; - -#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) - UART_InitCallbacksToDefault(huart); - - if (huart->MspInitCallback == NULL) - { - huart->MspInitCallback = HAL_UART_MspInit; - } - - /* Init the low level hardware */ - huart->MspInitCallback(huart); -#else - /* Init the low level hardware : GPIO, CLOCK */ - HAL_UART_MspInit(huart); -#endif /* (USE_HAL_UART_REGISTER_CALLBACKS) */ - } - - huart->gState = HAL_UART_STATE_BUSY; - - __HAL_UART_DISABLE(huart); - - /* Set the UART Communication parameters */ - if (UART_SetConfig(huart) == HAL_ERROR) - { - return HAL_ERROR; - } - - if (huart->AdvancedInit.AdvFeatureInit != UART_ADVFEATURE_NO_INIT) - { - UART_AdvFeatureConfig(huart); - } - - /* In half-duplex mode, the following bits must be kept cleared: - - LINEN and CLKEN bits in the USART_CR2 register, - - SCEN and IREN bits in the USART_CR3 register.*/ - CLEAR_BIT(huart->Instance->CR2, (USART_CR2_LINEN | USART_CR2_CLKEN)); - CLEAR_BIT(huart->Instance->CR3, (USART_CR3_IREN | USART_CR3_SCEN)); - - /* Enable the Half-Duplex mode by setting the HDSEL bit in the CR3 register */ - SET_BIT(huart->Instance->CR3, USART_CR3_HDSEL); - - __HAL_UART_ENABLE(huart); - - /* TEACK and/or REACK to check before moving huart->gState and huart->RxState to Ready */ - return (UART_CheckIdleState(huart)); -} - - -/** - * @brief Initialize the LIN mode according to the specified - * parameters in the UART_InitTypeDef and creates the associated handle. - * @param huart UART handle. - * @param BreakDetectLength Specifies the LIN break detection length. - * This parameter can be one of the following values: - * @arg @ref UART_LINBREAKDETECTLENGTH_10B 10-bit break detection - * @arg @ref UART_LINBREAKDETECTLENGTH_11B 11-bit break detection - * @retval HAL status - */ -HAL_StatusTypeDef HAL_LIN_Init(UART_HandleTypeDef *huart, uint32_t BreakDetectLength) -{ - /* Check the UART handle allocation */ - if (huart == NULL) - { - return HAL_ERROR; - } - - /* Check the LIN UART instance */ - assert_param(IS_UART_LIN_INSTANCE(huart->Instance)); - /* Check the Break detection length parameter */ - assert_param(IS_UART_LIN_BREAK_DETECT_LENGTH(BreakDetectLength)); - - /* LIN mode limited to 16-bit oversampling only */ - if (huart->Init.OverSampling == UART_OVERSAMPLING_8) - { - return HAL_ERROR; - } - /* LIN mode limited to 8-bit data length */ - if (huart->Init.WordLength != UART_WORDLENGTH_8B) - { - return HAL_ERROR; - } - - if (huart->gState == HAL_UART_STATE_RESET) - { - /* Allocate lock resource and initialize it */ - huart->Lock = HAL_UNLOCKED; - -#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) - UART_InitCallbacksToDefault(huart); - - if (huart->MspInitCallback == NULL) - { - huart->MspInitCallback = HAL_UART_MspInit; - } - - /* Init the low level hardware */ - huart->MspInitCallback(huart); -#else - /* Init the low level hardware : GPIO, CLOCK */ - HAL_UART_MspInit(huart); -#endif /* (USE_HAL_UART_REGISTER_CALLBACKS) */ - } - - huart->gState = HAL_UART_STATE_BUSY; - - __HAL_UART_DISABLE(huart); - - /* Set the UART Communication parameters */ - if (UART_SetConfig(huart) == HAL_ERROR) - { - return HAL_ERROR; - } - - if (huart->AdvancedInit.AdvFeatureInit != UART_ADVFEATURE_NO_INIT) - { - UART_AdvFeatureConfig(huart); - } - - /* In LIN mode, the following bits must be kept cleared: - - LINEN and CLKEN bits in the USART_CR2 register, - - SCEN and IREN bits in the USART_CR3 register.*/ - CLEAR_BIT(huart->Instance->CR2, USART_CR2_CLKEN); - CLEAR_BIT(huart->Instance->CR3, (USART_CR3_HDSEL | USART_CR3_IREN | USART_CR3_SCEN)); - - /* Enable the LIN mode by setting the LINEN bit in the CR2 register */ - SET_BIT(huart->Instance->CR2, USART_CR2_LINEN); - - /* Set the USART LIN Break detection length. */ - MODIFY_REG(huart->Instance->CR2, USART_CR2_LBDL, BreakDetectLength); - - __HAL_UART_ENABLE(huart); - - /* TEACK and/or REACK to check before moving huart->gState and huart->RxState to Ready */ - return (UART_CheckIdleState(huart)); -} - - -/** - * @brief Initialize the multiprocessor mode according to the specified - * parameters in the UART_InitTypeDef and initialize the associated handle. - * @param huart UART handle. - * @param Address UART node address (4-, 6-, 7- or 8-bit long). - * @param WakeUpMethod Specifies the UART wakeup method. - * This parameter can be one of the following values: - * @arg @ref UART_WAKEUPMETHOD_IDLELINE WakeUp by an idle line detection - * @arg @ref UART_WAKEUPMETHOD_ADDRESSMARK WakeUp by an address mark - * @note If the user resorts to idle line detection wake up, the Address parameter - * is useless and ignored by the initialization function. - * @note If the user resorts to address mark wake up, the address length detection - * is configured by default to 4 bits only. For the UART to be able to - * manage 6-, 7- or 8-bit long addresses detection, the API - * HAL_MultiProcessorEx_AddressLength_Set() must be called after - * HAL_MultiProcessor_Init(). - * @retval HAL status - */ -HAL_StatusTypeDef HAL_MultiProcessor_Init(UART_HandleTypeDef *huart, uint8_t Address, uint32_t WakeUpMethod) -{ - /* Check the UART handle allocation */ - if (huart == NULL) - { - return HAL_ERROR; - } - - /* Check the wake up method parameter */ - assert_param(IS_UART_WAKEUPMETHOD(WakeUpMethod)); - - if (huart->gState == HAL_UART_STATE_RESET) - { - /* Allocate lock resource and initialize it */ - huart->Lock = HAL_UNLOCKED; - -#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) - UART_InitCallbacksToDefault(huart); - - if (huart->MspInitCallback == NULL) - { - huart->MspInitCallback = HAL_UART_MspInit; - } - - /* Init the low level hardware */ - huart->MspInitCallback(huart); -#else - /* Init the low level hardware : GPIO, CLOCK */ - HAL_UART_MspInit(huart); -#endif /* (USE_HAL_UART_REGISTER_CALLBACKS) */ - } - - huart->gState = HAL_UART_STATE_BUSY; - - __HAL_UART_DISABLE(huart); - - /* Set the UART Communication parameters */ - if (UART_SetConfig(huart) == HAL_ERROR) - { - return HAL_ERROR; - } - - if (huart->AdvancedInit.AdvFeatureInit != UART_ADVFEATURE_NO_INIT) - { - UART_AdvFeatureConfig(huart); - } - - /* In multiprocessor mode, the following bits must be kept cleared: - - LINEN and CLKEN bits in the USART_CR2 register, - - SCEN, HDSEL and IREN bits in the USART_CR3 register. */ - CLEAR_BIT(huart->Instance->CR2, (USART_CR2_LINEN | USART_CR2_CLKEN)); - CLEAR_BIT(huart->Instance->CR3, (USART_CR3_SCEN | USART_CR3_HDSEL | USART_CR3_IREN)); - - if (WakeUpMethod == UART_WAKEUPMETHOD_ADDRESSMARK) - { - /* If address mark wake up method is chosen, set the USART address node */ - MODIFY_REG(huart->Instance->CR2, USART_CR2_ADD, ((uint32_t)Address << UART_CR2_ADDRESS_LSB_POS)); - } - - /* Set the wake up method by setting the WAKE bit in the CR1 register */ - MODIFY_REG(huart->Instance->CR1, USART_CR1_WAKE, WakeUpMethod); - - __HAL_UART_ENABLE(huart); - - /* TEACK and/or REACK to check before moving huart->gState and huart->RxState to Ready */ - return (UART_CheckIdleState(huart)); -} - - -/** - * @brief DeInitialize the UART peripheral. - * @param huart UART handle. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_UART_DeInit(UART_HandleTypeDef *huart) -{ - /* Check the UART handle allocation */ - if (huart == NULL) - { - return HAL_ERROR; - } - - /* Check the parameters */ - assert_param((IS_UART_INSTANCE(huart->Instance)) || (IS_LPUART_INSTANCE(huart->Instance))); - - huart->gState = HAL_UART_STATE_BUSY; - - __HAL_UART_DISABLE(huart); - - huart->Instance->CR1 = 0x0U; - huart->Instance->CR2 = 0x0U; - huart->Instance->CR3 = 0x0U; - -#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) - if (huart->MspDeInitCallback == NULL) - { - huart->MspDeInitCallback = HAL_UART_MspDeInit; - } - /* DeInit the low level hardware */ - huart->MspDeInitCallback(huart); -#else - /* DeInit the low level hardware */ - HAL_UART_MspDeInit(huart); -#endif /* (USE_HAL_UART_REGISTER_CALLBACKS) */ - - huart->ErrorCode = HAL_UART_ERROR_NONE; - huart->gState = HAL_UART_STATE_RESET; - huart->RxState = HAL_UART_STATE_RESET; - huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; - - __HAL_UNLOCK(huart); - - return HAL_OK; -} - -/** - * @brief Initialize the UART MSP. - * @param huart UART handle. - * @retval None - */ -__weak void HAL_UART_MspInit(UART_HandleTypeDef *huart) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(huart); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_UART_MspInit can be implemented in the user file - */ -} - -/** - * @brief DeInitialize the UART MSP. - * @param huart UART handle. - * @retval None - */ -__weak void HAL_UART_MspDeInit(UART_HandleTypeDef *huart) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(huart); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_UART_MspDeInit can be implemented in the user file - */ -} - -#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) -/** - * @brief Register a User UART Callback - * To be used instead of the weak predefined callback - * @param huart uart handle - * @param CallbackID ID of the callback to be registered - * This parameter can be one of the following values: - * @arg @ref HAL_UART_TX_HALFCOMPLETE_CB_ID Tx Half Complete Callback ID - * @arg @ref HAL_UART_TX_COMPLETE_CB_ID Tx Complete Callback ID - * @arg @ref HAL_UART_RX_HALFCOMPLETE_CB_ID Rx Half Complete Callback ID - * @arg @ref HAL_UART_RX_COMPLETE_CB_ID Rx Complete Callback ID - * @arg @ref HAL_UART_ERROR_CB_ID Error Callback ID - * @arg @ref HAL_UART_ABORT_COMPLETE_CB_ID Abort Complete Callback ID - * @arg @ref HAL_UART_ABORT_TRANSMIT_COMPLETE_CB_ID Abort Transmit Complete Callback ID - * @arg @ref HAL_UART_ABORT_RECEIVE_COMPLETE_CB_ID Abort Receive Complete Callback ID - * @arg @ref HAL_UART_WAKEUP_CB_ID Wakeup Callback ID -#if defined(USART_CR1_FIFOEN) - * @arg @ref HAL_UART_RX_FIFO_FULL_CB_ID Rx Fifo Full Callback ID - * @arg @ref HAL_UART_TX_FIFO_EMPTY_CB_ID Tx Fifo Empty Callback ID -#endif - * @arg @ref HAL_UART_MSPINIT_CB_ID MspInit Callback ID - * @arg @ref HAL_UART_MSPDEINIT_CB_ID MspDeInit Callback ID - * @param pCallback pointer to the Callback function - * @retval HAL status - */ -HAL_StatusTypeDef HAL_UART_RegisterCallback(UART_HandleTypeDef *huart, HAL_UART_CallbackIDTypeDef CallbackID, - pUART_CallbackTypeDef pCallback) -{ - HAL_StatusTypeDef status = HAL_OK; - - if (pCallback == NULL) - { - huart->ErrorCode |= HAL_UART_ERROR_INVALID_CALLBACK; - - return HAL_ERROR; - } - - __HAL_LOCK(huart); - - if (huart->gState == HAL_UART_STATE_READY) - { - switch (CallbackID) - { - case HAL_UART_TX_HALFCOMPLETE_CB_ID : - huart->TxHalfCpltCallback = pCallback; - break; - - case HAL_UART_TX_COMPLETE_CB_ID : - huart->TxCpltCallback = pCallback; - break; - - case HAL_UART_RX_HALFCOMPLETE_CB_ID : - huart->RxHalfCpltCallback = pCallback; - break; - - case HAL_UART_RX_COMPLETE_CB_ID : - huart->RxCpltCallback = pCallback; - break; - - case HAL_UART_ERROR_CB_ID : - huart->ErrorCallback = pCallback; - break; - - case HAL_UART_ABORT_COMPLETE_CB_ID : - huart->AbortCpltCallback = pCallback; - break; - - case HAL_UART_ABORT_TRANSMIT_COMPLETE_CB_ID : - huart->AbortTransmitCpltCallback = pCallback; - break; - - case HAL_UART_ABORT_RECEIVE_COMPLETE_CB_ID : - huart->AbortReceiveCpltCallback = pCallback; - break; - - case HAL_UART_WAKEUP_CB_ID : - huart->WakeupCallback = pCallback; - break; - -#if defined(USART_CR1_FIFOEN) - case HAL_UART_RX_FIFO_FULL_CB_ID : - huart->RxFifoFullCallback = pCallback; - break; - - case HAL_UART_TX_FIFO_EMPTY_CB_ID : - huart->TxFifoEmptyCallback = pCallback; - break; -#endif /* USART_CR1_FIFOEN */ - - case HAL_UART_MSPINIT_CB_ID : - huart->MspInitCallback = pCallback; - break; - - case HAL_UART_MSPDEINIT_CB_ID : - huart->MspDeInitCallback = pCallback; - break; - - default : - huart->ErrorCode |= HAL_UART_ERROR_INVALID_CALLBACK; - - status = HAL_ERROR; - break; - } - } - else if (huart->gState == HAL_UART_STATE_RESET) - { - switch (CallbackID) - { - case HAL_UART_MSPINIT_CB_ID : - huart->MspInitCallback = pCallback; - break; - - case HAL_UART_MSPDEINIT_CB_ID : - huart->MspDeInitCallback = pCallback; - break; - - default : - huart->ErrorCode |= HAL_UART_ERROR_INVALID_CALLBACK; - - status = HAL_ERROR; - break; - } - } - else - { - huart->ErrorCode |= HAL_UART_ERROR_INVALID_CALLBACK; - - status = HAL_ERROR; - } - - __HAL_UNLOCK(huart); - - return status; -} - -/** - * @brief Unregister an UART Callback - * UART callaback is redirected to the weak predefined callback - * @param huart uart handle - * @param CallbackID ID of the callback to be unregistered - * This parameter can be one of the following values: - * @arg @ref HAL_UART_TX_HALFCOMPLETE_CB_ID Tx Half Complete Callback ID - * @arg @ref HAL_UART_TX_COMPLETE_CB_ID Tx Complete Callback ID - * @arg @ref HAL_UART_RX_HALFCOMPLETE_CB_ID Rx Half Complete Callback ID - * @arg @ref HAL_UART_RX_COMPLETE_CB_ID Rx Complete Callback ID - * @arg @ref HAL_UART_ERROR_CB_ID Error Callback ID - * @arg @ref HAL_UART_ABORT_COMPLETE_CB_ID Abort Complete Callback ID - * @arg @ref HAL_UART_ABORT_TRANSMIT_COMPLETE_CB_ID Abort Transmit Complete Callback ID - * @arg @ref HAL_UART_ABORT_RECEIVE_COMPLETE_CB_ID Abort Receive Complete Callback ID - * @arg @ref HAL_UART_WAKEUP_CB_ID Wakeup Callback ID -#if defined(USART_CR1_FIFOEN) - * @arg @ref HAL_UART_RX_FIFO_FULL_CB_ID Rx Fifo Full Callback ID - * @arg @ref HAL_UART_TX_FIFO_EMPTY_CB_ID Tx Fifo Empty Callback ID -#endif - * @arg @ref HAL_UART_MSPINIT_CB_ID MspInit Callback ID - * @arg @ref HAL_UART_MSPDEINIT_CB_ID MspDeInit Callback ID - * @retval HAL status - */ -HAL_StatusTypeDef HAL_UART_UnRegisterCallback(UART_HandleTypeDef *huart, HAL_UART_CallbackIDTypeDef CallbackID) -{ - HAL_StatusTypeDef status = HAL_OK; - - __HAL_LOCK(huart); - - if (HAL_UART_STATE_READY == huart->gState) - { - switch (CallbackID) - { - case HAL_UART_TX_HALFCOMPLETE_CB_ID : - huart->TxHalfCpltCallback = HAL_UART_TxHalfCpltCallback; /* Legacy weak TxHalfCpltCallback */ - break; - - case HAL_UART_TX_COMPLETE_CB_ID : - huart->TxCpltCallback = HAL_UART_TxCpltCallback; /* Legacy weak TxCpltCallback */ - break; - - case HAL_UART_RX_HALFCOMPLETE_CB_ID : - huart->RxHalfCpltCallback = HAL_UART_RxHalfCpltCallback; /* Legacy weak RxHalfCpltCallback */ - break; - - case HAL_UART_RX_COMPLETE_CB_ID : - huart->RxCpltCallback = HAL_UART_RxCpltCallback; /* Legacy weak RxCpltCallback */ - break; - - case HAL_UART_ERROR_CB_ID : - huart->ErrorCallback = HAL_UART_ErrorCallback; /* Legacy weak ErrorCallback */ - break; - - case HAL_UART_ABORT_COMPLETE_CB_ID : - huart->AbortCpltCallback = HAL_UART_AbortCpltCallback; /* Legacy weak AbortCpltCallback */ - break; - - case HAL_UART_ABORT_TRANSMIT_COMPLETE_CB_ID : - huart->AbortTransmitCpltCallback = HAL_UART_AbortTransmitCpltCallback; /* Legacy weak - AbortTransmitCpltCallback */ - break; - - case HAL_UART_ABORT_RECEIVE_COMPLETE_CB_ID : - huart->AbortReceiveCpltCallback = HAL_UART_AbortReceiveCpltCallback; /* Legacy weak - AbortReceiveCpltCallback */ - break; - - case HAL_UART_WAKEUP_CB_ID : - huart->WakeupCallback = HAL_UARTEx_WakeupCallback; /* Legacy weak WakeupCallback */ - break; - -#if defined(USART_CR1_FIFOEN) - case HAL_UART_RX_FIFO_FULL_CB_ID : - huart->RxFifoFullCallback = HAL_UARTEx_RxFifoFullCallback; /* Legacy weak RxFifoFullCallback */ - break; - - case HAL_UART_TX_FIFO_EMPTY_CB_ID : - huart->TxFifoEmptyCallback = HAL_UARTEx_TxFifoEmptyCallback; /* Legacy weak TxFifoEmptyCallback */ - break; - -#endif /* USART_CR1_FIFOEN */ - case HAL_UART_MSPINIT_CB_ID : - huart->MspInitCallback = HAL_UART_MspInit; /* Legacy weak MspInitCallback */ - break; - - case HAL_UART_MSPDEINIT_CB_ID : - huart->MspDeInitCallback = HAL_UART_MspDeInit; /* Legacy weak MspDeInitCallback */ - break; - - default : - huart->ErrorCode |= HAL_UART_ERROR_INVALID_CALLBACK; - - status = HAL_ERROR; - break; - } - } - else if (HAL_UART_STATE_RESET == huart->gState) - { - switch (CallbackID) - { - case HAL_UART_MSPINIT_CB_ID : - huart->MspInitCallback = HAL_UART_MspInit; - break; - - case HAL_UART_MSPDEINIT_CB_ID : - huart->MspDeInitCallback = HAL_UART_MspDeInit; - break; - - default : - huart->ErrorCode |= HAL_UART_ERROR_INVALID_CALLBACK; - - status = HAL_ERROR; - break; - } - } - else - { - huart->ErrorCode |= HAL_UART_ERROR_INVALID_CALLBACK; - - status = HAL_ERROR; - } - - __HAL_UNLOCK(huart); - - return status; -} - -/** - * @brief Register a User UART Rx Event Callback - * To be used instead of the weak predefined callback - * @param huart Uart handle - * @param pCallback Pointer to the Rx Event Callback function - * @retval HAL status - */ -HAL_StatusTypeDef HAL_UART_RegisterRxEventCallback(UART_HandleTypeDef *huart, pUART_RxEventCallbackTypeDef pCallback) -{ - HAL_StatusTypeDef status = HAL_OK; - - if (pCallback == NULL) - { - huart->ErrorCode |= HAL_UART_ERROR_INVALID_CALLBACK; - - return HAL_ERROR; - } - - /* Process locked */ - __HAL_LOCK(huart); - - if (huart->gState == HAL_UART_STATE_READY) - { - huart->RxEventCallback = pCallback; - } - else - { - huart->ErrorCode |= HAL_UART_ERROR_INVALID_CALLBACK; - - status = HAL_ERROR; - } - - /* Release Lock */ - __HAL_UNLOCK(huart); - - return status; -} - -/** - * @brief UnRegister the UART Rx Event Callback - * UART Rx Event Callback is redirected to the weak HAL_UARTEx_RxEventCallback() predefined callback - * @param huart Uart handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_UART_UnRegisterRxEventCallback(UART_HandleTypeDef *huart) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Process locked */ - __HAL_LOCK(huart); - - if (huart->gState == HAL_UART_STATE_READY) - { - huart->RxEventCallback = HAL_UARTEx_RxEventCallback; /* Legacy weak UART Rx Event Callback */ - } - else - { - huart->ErrorCode |= HAL_UART_ERROR_INVALID_CALLBACK; - - status = HAL_ERROR; - } - - /* Release Lock */ - __HAL_UNLOCK(huart); - return status; -} - -#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ - -/** - * @} - */ - -/** @defgroup UART_Exported_Functions_Group2 IO operation functions - * @brief UART Transmit/Receive functions - * -@verbatim - =============================================================================== - ##### IO operation functions ##### - =============================================================================== - This subsection provides a set of functions allowing to manage the UART asynchronous - and Half duplex data transfers. - - (#) There are two mode of transfer: - (+) Blocking mode: The communication is performed in polling mode. - The HAL status of all data processing is returned by the same function - after finishing transfer. - (+) Non-Blocking mode: The communication is performed using Interrupts - or DMA, These API's return the HAL status. - The end of the data processing will be indicated through the - dedicated UART IRQ when using Interrupt mode or the DMA IRQ when - using DMA mode. - The HAL_UART_TxCpltCallback(), HAL_UART_RxCpltCallback() user callbacks - will be executed respectively at the end of the transmit or Receive process - The HAL_UART_ErrorCallback()user callback will be executed when a communication error is detected - - (#) Blocking mode API's are : - (+) HAL_UART_Transmit() - (+) HAL_UART_Receive() - - (#) Non-Blocking mode API's with Interrupt are : - (+) HAL_UART_Transmit_IT() - (+) HAL_UART_Receive_IT() - (+) HAL_UART_IRQHandler() - - (#) Non-Blocking mode API's with DMA are : - (+) HAL_UART_Transmit_DMA() - (+) HAL_UART_Receive_DMA() - (+) HAL_UART_DMAPause() - (+) HAL_UART_DMAResume() - (+) HAL_UART_DMAStop() - - (#) A set of Transfer Complete Callbacks are provided in Non_Blocking mode: - (+) HAL_UART_TxHalfCpltCallback() - (+) HAL_UART_TxCpltCallback() - (+) HAL_UART_RxHalfCpltCallback() - (+) HAL_UART_RxCpltCallback() - (+) HAL_UART_ErrorCallback() - - (#) Non-Blocking mode transfers could be aborted using Abort API's : - (+) HAL_UART_Abort() - (+) HAL_UART_AbortTransmit() - (+) HAL_UART_AbortReceive() - (+) HAL_UART_Abort_IT() - (+) HAL_UART_AbortTransmit_IT() - (+) HAL_UART_AbortReceive_IT() - - (#) For Abort services based on interrupts (HAL_UART_Abortxxx_IT), a set of Abort Complete Callbacks are provided: - (+) HAL_UART_AbortCpltCallback() - (+) HAL_UART_AbortTransmitCpltCallback() - (+) HAL_UART_AbortReceiveCpltCallback() - - (#) A Rx Event Reception Callback (Rx event notification) is available for Non_Blocking modes of enhanced - reception services: - (+) HAL_UARTEx_RxEventCallback() - - (#) In Non-Blocking mode transfers, possible errors are split into 2 categories. - Errors are handled as follows : - (+) Error is considered as Recoverable and non blocking : Transfer could go till end, but error severity is - to be evaluated by user : this concerns Frame Error, Parity Error or Noise Error - in Interrupt mode reception . - Received character is then retrieved and stored in Rx buffer, Error code is set to allow user - to identify error type, and HAL_UART_ErrorCallback() user callback is executed. - Transfer is kept ongoing on UART side. - If user wants to abort it, Abort services should be called by user. - (+) Error is considered as Blocking : Transfer could not be completed properly and is aborted. - This concerns Overrun Error In Interrupt mode reception and all errors in DMA mode. - Error code is set to allow user to identify error type, and HAL_UART_ErrorCallback() - user callback is executed. - - -@- In the Half duplex communication, it is forbidden to run the transmit - and receive process in parallel, the UART state HAL_UART_STATE_BUSY_TX_RX can't be useful. - -@endverbatim - * @{ - */ - -/** - * @brief Send an amount of data in blocking mode. - * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), - * the sent data is handled as a set of u16. In this case, Size must indicate the number - * of u16 provided through pData. - * @note When FIFO mode is enabled, writing a data in the TDR register adds one - * data to the TXFIFO. Write operations to the TDR register are performed - * when TXFNF flag is set. From hardware perspective, TXFNF flag and - * TXE are mapped on the same bit-field. - * @param huart UART handle. - * @param pData Pointer to data buffer (u8 or u16 data elements). - * @param Size Amount of data elements (u8 or u16) to be sent. - * @param Timeout Timeout duration. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_UART_Transmit(UART_HandleTypeDef *huart, const uint8_t *pData, uint16_t Size, uint32_t Timeout) -{ - const uint8_t *pdata8bits; - const uint16_t *pdata16bits; - uint32_t tickstart; - - /* Check that a Tx process is not already ongoing */ - if (huart->gState == HAL_UART_STATE_READY) - { - if ((pData == NULL) || (Size == 0U)) - { - return HAL_ERROR; - } - - __HAL_LOCK(huart); - - huart->ErrorCode = HAL_UART_ERROR_NONE; - huart->gState = HAL_UART_STATE_BUSY_TX; - - /* Init tickstart for timeout management */ - tickstart = HAL_GetTick(); - - huart->TxXferSize = Size; - huart->TxXferCount = Size; - - /* In case of 9bits/No Parity transfer, pData needs to be handled as a uint16_t pointer */ - if ((huart->Init.WordLength == UART_WORDLENGTH_9B) && (huart->Init.Parity == UART_PARITY_NONE)) - { - pdata8bits = NULL; - pdata16bits = (const uint16_t *) pData; - } - else - { - pdata8bits = pData; - pdata16bits = NULL; - } - - __HAL_UNLOCK(huart); - - while (huart->TxXferCount > 0U) - { - if (UART_WaitOnFlagUntilTimeout(huart, UART_FLAG_TXE, RESET, tickstart, Timeout) != HAL_OK) - { - return HAL_TIMEOUT; - } - if (pdata8bits == NULL) - { - huart->Instance->TDR = (uint16_t)(*pdata16bits & 0x01FFU); - pdata16bits++; - } - else - { - huart->Instance->TDR = (uint8_t)(*pdata8bits & 0xFFU); - pdata8bits++; - } - huart->TxXferCount--; - } - - if (UART_WaitOnFlagUntilTimeout(huart, UART_FLAG_TC, RESET, tickstart, Timeout) != HAL_OK) - { - return HAL_TIMEOUT; - } - - /* At end of Tx process, restore huart->gState to Ready */ - huart->gState = HAL_UART_STATE_READY; - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Receive an amount of data in blocking mode. - * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), - * the received data is handled as a set of u16. In this case, Size must indicate the number - * of u16 available through pData. - * @note When FIFO mode is enabled, the RXFNE flag is set as long as the RXFIFO - * is not empty. Read operations from the RDR register are performed when - * RXFNE flag is set. From hardware perspective, RXFNE flag and - * RXNE are mapped on the same bit-field. - * @param huart UART handle. - * @param pData Pointer to data buffer (u8 or u16 data elements). - * @param Size Amount of data elements (u8 or u16) to be received. - * @param Timeout Timeout duration. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_UART_Receive(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint32_t Timeout) -{ - uint8_t *pdata8bits; - uint16_t *pdata16bits; - uint16_t uhMask; - uint32_t tickstart; - - /* Check that a Rx process is not already ongoing */ - if (huart->RxState == HAL_UART_STATE_READY) - { - if ((pData == NULL) || (Size == 0U)) - { - return HAL_ERROR; - } - - __HAL_LOCK(huart); - - huart->ErrorCode = HAL_UART_ERROR_NONE; - huart->RxState = HAL_UART_STATE_BUSY_RX; - huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; - - /* Init tickstart for timeout management */ - tickstart = HAL_GetTick(); - - huart->RxXferSize = Size; - huart->RxXferCount = Size; - - /* Computation of UART mask to apply to RDR register */ - UART_MASK_COMPUTATION(huart); - uhMask = huart->Mask; - - /* In case of 9bits/No Parity transfer, pRxData needs to be handled as a uint16_t pointer */ - if ((huart->Init.WordLength == UART_WORDLENGTH_9B) && (huart->Init.Parity == UART_PARITY_NONE)) - { - pdata8bits = NULL; - pdata16bits = (uint16_t *) pData; - } - else - { - pdata8bits = pData; - pdata16bits = NULL; - } - - __HAL_UNLOCK(huart); - - /* as long as data have to be received */ - while (huart->RxXferCount > 0U) - { - if (UART_WaitOnFlagUntilTimeout(huart, UART_FLAG_RXNE, RESET, tickstart, Timeout) != HAL_OK) - { - return HAL_TIMEOUT; - } - if (pdata8bits == NULL) - { - *pdata16bits = (uint16_t)(huart->Instance->RDR & uhMask); - pdata16bits++; - } - else - { - *pdata8bits = (uint8_t)(huart->Instance->RDR & (uint8_t)uhMask); - pdata8bits++; - } - huart->RxXferCount--; - } - - /* At end of Rx process, restore huart->RxState to Ready */ - huart->RxState = HAL_UART_STATE_READY; - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Send an amount of data in interrupt mode. - * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), - * the sent data is handled as a set of u16. In this case, Size must indicate the number - * of u16 provided through pData. - * @param huart UART handle. - * @param pData Pointer to data buffer (u8 or u16 data elements). - * @param Size Amount of data elements (u8 or u16) to be sent. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_UART_Transmit_IT(UART_HandleTypeDef *huart, const uint8_t *pData, uint16_t Size) -{ - /* Check that a Tx process is not already ongoing */ - if (huart->gState == HAL_UART_STATE_READY) - { - if ((pData == NULL) || (Size == 0U)) - { - return HAL_ERROR; - } - - __HAL_LOCK(huart); - - huart->pTxBuffPtr = pData; - huart->TxXferSize = Size; - huart->TxXferCount = Size; - huart->TxISR = NULL; - - huart->ErrorCode = HAL_UART_ERROR_NONE; - huart->gState = HAL_UART_STATE_BUSY_TX; - -#if defined(USART_CR1_FIFOEN) - /* Configure Tx interrupt processing */ - if (huart->FifoMode == UART_FIFOMODE_ENABLE) - { - /* Set the Tx ISR function pointer according to the data word length */ - if ((huart->Init.WordLength == UART_WORDLENGTH_9B) && (huart->Init.Parity == UART_PARITY_NONE)) - { - huart->TxISR = UART_TxISR_16BIT_FIFOEN; - } - else - { - huart->TxISR = UART_TxISR_8BIT_FIFOEN; - } - - __HAL_UNLOCK(huart); - - /* Enable the TX FIFO threshold interrupt */ - ATOMIC_SET_BIT(huart->Instance->CR3, USART_CR3_TXFTIE); - } - else - { - /* Set the Tx ISR function pointer according to the data word length */ - if ((huart->Init.WordLength == UART_WORDLENGTH_9B) && (huart->Init.Parity == UART_PARITY_NONE)) - { - huart->TxISR = UART_TxISR_16BIT; - } - else - { - huart->TxISR = UART_TxISR_8BIT; - } - - __HAL_UNLOCK(huart); - - /* Enable the Transmit Data Register Empty interrupt */ - ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_TXEIE_TXFNFIE); - } -#else - /* Set the Tx ISR function pointer according to the data word length */ - if ((huart->Init.WordLength == UART_WORDLENGTH_9B) && (huart->Init.Parity == UART_PARITY_NONE)) - { - huart->TxISR = UART_TxISR_16BIT; - } - else - { - huart->TxISR = UART_TxISR_8BIT; - } - - __HAL_UNLOCK(huart); - - /* Enable the Transmit Data Register Empty interrupt */ - ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_TXEIE); -#endif /* USART_CR1_FIFOEN */ - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Receive an amount of data in interrupt mode. - * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), - * the received data is handled as a set of u16. In this case, Size must indicate the number - * of u16 available through pData. - * @param huart UART handle. - * @param pData Pointer to data buffer (u8 or u16 data elements). - * @param Size Amount of data elements (u8 or u16) to be received. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_UART_Receive_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size) -{ - /* Check that a Rx process is not already ongoing */ - if (huart->RxState == HAL_UART_STATE_READY) - { - if ((pData == NULL) || (Size == 0U)) - { - return HAL_ERROR; - } - - __HAL_LOCK(huart); - - /* Set Reception type to Standard reception */ - huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; - - if (!(IS_LPUART_INSTANCE(huart->Instance))) - { - /* Check that USART RTOEN bit is set */ - if (READ_BIT(huart->Instance->CR2, USART_CR2_RTOEN) != 0U) - { - /* Enable the UART Receiver Timeout Interrupt */ - ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_RTOIE); - } - } - - return (UART_Start_Receive_IT(huart, pData, Size)); - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Send an amount of data in DMA mode. - * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), - * the sent data is handled as a set of u16. In this case, Size must indicate the number - * of u16 provided through pData. - * @param huart UART handle. - * @param pData Pointer to data buffer (u8 or u16 data elements). - * @param Size Amount of data elements (u8 or u16) to be sent. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_UART_Transmit_DMA(UART_HandleTypeDef *huart, const uint8_t *pData, uint16_t Size) -{ - /* Check that a Tx process is not already ongoing */ - if (huart->gState == HAL_UART_STATE_READY) - { - if ((pData == NULL) || (Size == 0U)) - { - return HAL_ERROR; - } - - __HAL_LOCK(huart); - - huart->pTxBuffPtr = pData; - huart->TxXferSize = Size; - huart->TxXferCount = Size; - - huart->ErrorCode = HAL_UART_ERROR_NONE; - huart->gState = HAL_UART_STATE_BUSY_TX; - - if (huart->hdmatx != NULL) - { - /* Set the UART DMA transfer complete callback */ - huart->hdmatx->XferCpltCallback = UART_DMATransmitCplt; - - /* Set the UART DMA Half transfer complete callback */ - huart->hdmatx->XferHalfCpltCallback = UART_DMATxHalfCplt; - - /* Set the DMA error callback */ - huart->hdmatx->XferErrorCallback = UART_DMAError; - - /* Set the DMA abort callback */ - huart->hdmatx->XferAbortCallback = NULL; - - /* Enable the UART transmit DMA channel */ - if (HAL_DMA_Start_IT(huart->hdmatx, (uint32_t)huart->pTxBuffPtr, (uint32_t)&huart->Instance->TDR, Size) != HAL_OK) - { - /* Set error code to DMA */ - huart->ErrorCode = HAL_UART_ERROR_DMA; - - __HAL_UNLOCK(huart); - - /* Restore huart->gState to ready */ - huart->gState = HAL_UART_STATE_READY; - - return HAL_ERROR; - } - } - /* Clear the TC flag in the ICR register */ - __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_TCF); - - __HAL_UNLOCK(huart); - - /* Enable the DMA transfer for transmit request by setting the DMAT bit - in the UART CR3 register */ - ATOMIC_SET_BIT(huart->Instance->CR3, USART_CR3_DMAT); - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Receive an amount of data in DMA mode. - * @note When the UART parity is enabled (PCE = 1), the received data contain - * the parity bit (MSB position). - * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), - * the received data is handled as a set of u16. In this case, Size must indicate the number - * of u16 available through pData. - * @param huart UART handle. - * @param pData Pointer to data buffer (u8 or u16 data elements). - * @param Size Amount of data elements (u8 or u16) to be received. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_UART_Receive_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size) -{ - /* Check that a Rx process is not already ongoing */ - if (huart->RxState == HAL_UART_STATE_READY) - { - if ((pData == NULL) || (Size == 0U)) - { - return HAL_ERROR; - } - - __HAL_LOCK(huart); - - /* Set Reception type to Standard reception */ - huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; - - if (!(IS_LPUART_INSTANCE(huart->Instance))) - { - /* Check that USART RTOEN bit is set */ - if (READ_BIT(huart->Instance->CR2, USART_CR2_RTOEN) != 0U) - { - /* Enable the UART Receiver Timeout Interrupt */ - ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_RTOIE); - } - } - - return (UART_Start_Receive_DMA(huart, pData, Size)); - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Pause the DMA Transfer. - * @param huart UART handle. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_UART_DMAPause(UART_HandleTypeDef *huart) -{ - const HAL_UART_StateTypeDef gstate = huart->gState; - const HAL_UART_StateTypeDef rxstate = huart->RxState; - - __HAL_LOCK(huart); - - if ((HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAT)) && - (gstate == HAL_UART_STATE_BUSY_TX)) - { - /* Disable the UART DMA Tx request */ - ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAT); - } - if ((HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR)) && - (rxstate == HAL_UART_STATE_BUSY_RX)) - { - /* Disable PE and ERR (Frame error, noise error, overrun error) interrupts */ - ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_PEIE); - ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE); - - /* Disable the UART DMA Rx request */ - ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR); - } - - __HAL_UNLOCK(huart); - - return HAL_OK; -} - -/** - * @brief Resume the DMA Transfer. - * @param huart UART handle. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_UART_DMAResume(UART_HandleTypeDef *huart) -{ - __HAL_LOCK(huart); - - if (huart->gState == HAL_UART_STATE_BUSY_TX) - { - /* Enable the UART DMA Tx request */ - ATOMIC_SET_BIT(huart->Instance->CR3, USART_CR3_DMAT); - } - if (huart->RxState == HAL_UART_STATE_BUSY_RX) - { - /* Clear the Overrun flag before resuming the Rx transfer */ - __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_OREF); - - /* Re-enable PE and ERR (Frame error, noise error, overrun error) interrupts */ - if (huart->Init.Parity != UART_PARITY_NONE) - { - ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_PEIE); - } - ATOMIC_SET_BIT(huart->Instance->CR3, USART_CR3_EIE); - - /* Enable the UART DMA Rx request */ - ATOMIC_SET_BIT(huart->Instance->CR3, USART_CR3_DMAR); - } - - __HAL_UNLOCK(huart); - - return HAL_OK; -} - -/** - * @brief Stop the DMA Transfer. - * @param huart UART handle. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_UART_DMAStop(UART_HandleTypeDef *huart) -{ - /* The Lock is not implemented on this API to allow the user application - to call the HAL UART API under callbacks HAL_UART_TxCpltCallback() / HAL_UART_RxCpltCallback() / - HAL_UART_TxHalfCpltCallback / HAL_UART_RxHalfCpltCallback: - indeed, when HAL_DMA_Abort() API is called, the DMA TX/RX Transfer or Half Transfer complete - interrupt is generated if the DMA transfer interruption occurs at the middle or at the end of - the stream and the corresponding call back is executed. */ - - const HAL_UART_StateTypeDef gstate = huart->gState; - const HAL_UART_StateTypeDef rxstate = huart->RxState; - - /* Stop UART DMA Tx request if ongoing */ - if ((HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAT)) && - (gstate == HAL_UART_STATE_BUSY_TX)) - { - ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAT); - - /* Abort the UART DMA Tx channel */ - if (huart->hdmatx != NULL) - { - if (HAL_DMA_Abort(huart->hdmatx) != HAL_OK) - { - if (HAL_DMA_GetError(huart->hdmatx) == HAL_DMA_ERROR_TIMEOUT) - { - /* Set error code to DMA */ - huart->ErrorCode = HAL_UART_ERROR_DMA; - - return HAL_TIMEOUT; - } - } - } - - UART_EndTxTransfer(huart); - } - - /* Stop UART DMA Rx request if ongoing */ - if ((HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR)) && - (rxstate == HAL_UART_STATE_BUSY_RX)) - { - ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR); - - /* Abort the UART DMA Rx channel */ - if (huart->hdmarx != NULL) - { - if (HAL_DMA_Abort(huart->hdmarx) != HAL_OK) - { - if (HAL_DMA_GetError(huart->hdmarx) == HAL_DMA_ERROR_TIMEOUT) - { - /* Set error code to DMA */ - huart->ErrorCode = HAL_UART_ERROR_DMA; - - return HAL_TIMEOUT; - } - } - } - - UART_EndRxTransfer(huart); - } - - return HAL_OK; -} - -/** - * @brief Abort ongoing transfers (blocking mode). - * @param huart UART handle. - * @note This procedure could be used for aborting any ongoing transfer started in Interrupt or DMA mode. - * This procedure performs following operations : - * - Disable UART Interrupts (Tx and Rx) - * - Disable the DMA transfer in the peripheral register (if enabled) - * - Abort DMA transfer by calling HAL_DMA_Abort (in case of transfer in DMA mode) - * - Set handle State to READY - * @note This procedure is executed in blocking mode : when exiting function, Abort is considered as completed. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_UART_Abort(UART_HandleTypeDef *huart) -{ -#if defined(USART_CR1_FIFOEN) - /* Disable TXE, TC, RXNE, PE, RXFT, TXFT and ERR (Frame error, noise error, overrun error) interrupts */ - ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE | - USART_CR1_TXEIE_TXFNFIE | USART_CR1_TCIE)); - ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE | USART_CR3_RXFTIE | USART_CR3_TXFTIE); -#else - /* Disable TXEIE, TCIE, RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts */ - ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE | USART_CR1_PEIE | USART_CR1_TXEIE | USART_CR1_TCIE)); - ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE); -#endif /* USART_CR1_FIFOEN */ - - /* If Reception till IDLE event was ongoing, disable IDLEIE interrupt */ - if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) - { - ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_IDLEIE)); - } - - /* Abort the UART DMA Tx channel if enabled */ - if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAT)) - { - /* Disable the UART DMA Tx request if enabled */ - ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAT); - - /* Abort the UART DMA Tx channel : use blocking DMA Abort API (no callback) */ - if (huart->hdmatx != NULL) - { - /* Set the UART DMA Abort callback to Null. - No call back execution at end of DMA abort procedure */ - huart->hdmatx->XferAbortCallback = NULL; - - if (HAL_DMA_Abort(huart->hdmatx) != HAL_OK) - { - if (HAL_DMA_GetError(huart->hdmatx) == HAL_DMA_ERROR_TIMEOUT) - { - /* Set error code to DMA */ - huart->ErrorCode = HAL_UART_ERROR_DMA; - - return HAL_TIMEOUT; - } - } - } - } - - /* Abort the UART DMA Rx channel if enabled */ - if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR)) - { - /* Disable the UART DMA Rx request if enabled */ - ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR); - - /* Abort the UART DMA Rx channel : use blocking DMA Abort API (no callback) */ - if (huart->hdmarx != NULL) - { - /* Set the UART DMA Abort callback to Null. - No call back execution at end of DMA abort procedure */ - huart->hdmarx->XferAbortCallback = NULL; - - if (HAL_DMA_Abort(huart->hdmarx) != HAL_OK) - { - if (HAL_DMA_GetError(huart->hdmarx) == HAL_DMA_ERROR_TIMEOUT) - { - /* Set error code to DMA */ - huart->ErrorCode = HAL_UART_ERROR_DMA; - - return HAL_TIMEOUT; - } - } - } - } - - /* Reset Tx and Rx transfer counters */ - huart->TxXferCount = 0U; - huart->RxXferCount = 0U; - - /* Clear the Error flags in the ICR register */ - __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_OREF | UART_CLEAR_NEF | UART_CLEAR_PEF | UART_CLEAR_FEF); - -#if defined(USART_CR1_FIFOEN) - /* Flush the whole TX FIFO (if needed) */ - if (huart->FifoMode == UART_FIFOMODE_ENABLE) - { - __HAL_UART_SEND_REQ(huart, UART_TXDATA_FLUSH_REQUEST); - } -#endif /* USART_CR1_FIFOEN */ - - /* Discard the received data */ - __HAL_UART_SEND_REQ(huart, UART_RXDATA_FLUSH_REQUEST); - - /* Restore huart->gState and huart->RxState to Ready */ - huart->gState = HAL_UART_STATE_READY; - huart->RxState = HAL_UART_STATE_READY; - huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; - - huart->ErrorCode = HAL_UART_ERROR_NONE; - - return HAL_OK; -} - -/** - * @brief Abort ongoing Transmit transfer (blocking mode). - * @param huart UART handle. - * @note This procedure could be used for aborting any ongoing Tx transfer started in Interrupt or DMA mode. - * This procedure performs following operations : - * - Disable UART Interrupts (Tx) - * - Disable the DMA transfer in the peripheral register (if enabled) - * - Abort DMA transfer by calling HAL_DMA_Abort (in case of transfer in DMA mode) - * - Set handle State to READY - * @note This procedure is executed in blocking mode : when exiting function, Abort is considered as completed. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_UART_AbortTransmit(UART_HandleTypeDef *huart) -{ -#if defined(USART_CR1_FIFOEN) - /* Disable TCIE, TXEIE and TXFTIE interrupts */ - ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_TCIE | USART_CR1_TXEIE_TXFNFIE)); - ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_TXFTIE); -#else - /* Disable TXEIE and TCIE interrupts */ - ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_TXEIE | USART_CR1_TCIE)); -#endif /* USART_CR1_FIFOEN */ - - /* Abort the UART DMA Tx channel if enabled */ - if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAT)) - { - /* Disable the UART DMA Tx request if enabled */ - ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAT); - - /* Abort the UART DMA Tx channel : use blocking DMA Abort API (no callback) */ - if (huart->hdmatx != NULL) - { - /* Set the UART DMA Abort callback to Null. - No call back execution at end of DMA abort procedure */ - huart->hdmatx->XferAbortCallback = NULL; - - if (HAL_DMA_Abort(huart->hdmatx) != HAL_OK) - { - if (HAL_DMA_GetError(huart->hdmatx) == HAL_DMA_ERROR_TIMEOUT) - { - /* Set error code to DMA */ - huart->ErrorCode = HAL_UART_ERROR_DMA; - - return HAL_TIMEOUT; - } - } - } - } - - /* Reset Tx transfer counter */ - huart->TxXferCount = 0U; - -#if defined(USART_CR1_FIFOEN) - /* Flush the whole TX FIFO (if needed) */ - if (huart->FifoMode == UART_FIFOMODE_ENABLE) - { - __HAL_UART_SEND_REQ(huart, UART_TXDATA_FLUSH_REQUEST); - } -#endif /* USART_CR1_FIFOEN */ - - /* Restore huart->gState to Ready */ - huart->gState = HAL_UART_STATE_READY; - - return HAL_OK; -} - -/** - * @brief Abort ongoing Receive transfer (blocking mode). - * @param huart UART handle. - * @note This procedure could be used for aborting any ongoing Rx transfer started in Interrupt or DMA mode. - * This procedure performs following operations : - * - Disable UART Interrupts (Rx) - * - Disable the DMA transfer in the peripheral register (if enabled) - * - Abort DMA transfer by calling HAL_DMA_Abort (in case of transfer in DMA mode) - * - Set handle State to READY - * @note This procedure is executed in blocking mode : when exiting function, Abort is considered as completed. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_UART_AbortReceive(UART_HandleTypeDef *huart) -{ -#if defined(USART_CR1_FIFOEN) - /* Disable PEIE, EIE, RXNEIE and RXFTIE interrupts */ - ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_PEIE | USART_CR1_RXNEIE_RXFNEIE)); - ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE | USART_CR3_RXFTIE); -#else - /* Disable RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts */ - ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE | USART_CR1_PEIE)); - ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE); -#endif /* USART_CR1_FIFOEN */ - - /* If Reception till IDLE event was ongoing, disable IDLEIE interrupt */ - if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) - { - ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_IDLEIE)); - } - - /* Abort the UART DMA Rx channel if enabled */ - if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR)) - { - /* Disable the UART DMA Rx request if enabled */ - ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR); - - /* Abort the UART DMA Rx channel : use blocking DMA Abort API (no callback) */ - if (huart->hdmarx != NULL) - { - /* Set the UART DMA Abort callback to Null. - No call back execution at end of DMA abort procedure */ - huart->hdmarx->XferAbortCallback = NULL; - - if (HAL_DMA_Abort(huart->hdmarx) != HAL_OK) - { - if (HAL_DMA_GetError(huart->hdmarx) == HAL_DMA_ERROR_TIMEOUT) - { - /* Set error code to DMA */ - huart->ErrorCode = HAL_UART_ERROR_DMA; - - return HAL_TIMEOUT; - } - } - } - } - - /* Reset Rx transfer counter */ - huart->RxXferCount = 0U; - - /* Clear the Error flags in the ICR register */ - __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_OREF | UART_CLEAR_NEF | UART_CLEAR_PEF | UART_CLEAR_FEF); - - /* Discard the received data */ - __HAL_UART_SEND_REQ(huart, UART_RXDATA_FLUSH_REQUEST); - - /* Restore huart->RxState to Ready */ - huart->RxState = HAL_UART_STATE_READY; - huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; - - return HAL_OK; -} - -/** - * @brief Abort ongoing transfers (Interrupt mode). - * @param huart UART handle. - * @note This procedure could be used for aborting any ongoing transfer started in Interrupt or DMA mode. - * This procedure performs following operations : - * - Disable UART Interrupts (Tx and Rx) - * - Disable the DMA transfer in the peripheral register (if enabled) - * - Abort DMA transfer by calling HAL_DMA_Abort_IT (in case of transfer in DMA mode) - * - Set handle State to READY - * - At abort completion, call user abort complete callback - * @note This procedure is executed in Interrupt mode, meaning that abort procedure could be - * considered as completed only when user abort complete callback is executed (not when exiting function). - * @retval HAL status - */ -HAL_StatusTypeDef HAL_UART_Abort_IT(UART_HandleTypeDef *huart) -{ - uint32_t abortcplt = 1U; - - /* Disable interrupts */ -#if defined(USART_CR1_FIFOEN) - ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_PEIE | USART_CR1_TCIE | USART_CR1_RXNEIE_RXFNEIE | - USART_CR1_TXEIE_TXFNFIE)); - ATOMIC_CLEAR_BIT(huart->Instance->CR3, (USART_CR3_EIE | USART_CR3_RXFTIE | USART_CR3_TXFTIE)); -#else - ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE | USART_CR1_PEIE | USART_CR1_TXEIE | USART_CR1_TCIE)); - ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE); -#endif /* USART_CR1_FIFOEN */ - - /* If Reception till IDLE event was ongoing, disable IDLEIE interrupt */ - if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) - { - ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_IDLEIE)); - } - - /* If DMA Tx and/or DMA Rx Handles are associated to UART Handle, DMA Abort complete callbacks should be initialised - before any call to DMA Abort functions */ - /* DMA Tx Handle is valid */ - if (huart->hdmatx != NULL) - { - /* Set DMA Abort Complete callback if UART DMA Tx request if enabled. - Otherwise, set it to NULL */ - if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAT)) - { - huart->hdmatx->XferAbortCallback = UART_DMATxAbortCallback; - } - else - { - huart->hdmatx->XferAbortCallback = NULL; - } - } - /* DMA Rx Handle is valid */ - if (huart->hdmarx != NULL) - { - /* Set DMA Abort Complete callback if UART DMA Rx request if enabled. - Otherwise, set it to NULL */ - if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR)) - { - huart->hdmarx->XferAbortCallback = UART_DMARxAbortCallback; - } - else - { - huart->hdmarx->XferAbortCallback = NULL; - } - } - - /* Abort the UART DMA Tx channel if enabled */ - if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAT)) - { - /* Disable DMA Tx at UART level */ - ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAT); - - /* Abort the UART DMA Tx channel : use non blocking DMA Abort API (callback) */ - if (huart->hdmatx != NULL) - { - /* UART Tx DMA Abort callback has already been initialised : - will lead to call HAL_UART_AbortCpltCallback() at end of DMA abort procedure */ - - /* Abort DMA TX */ - if (HAL_DMA_Abort_IT(huart->hdmatx) != HAL_OK) - { - huart->hdmatx->XferAbortCallback = NULL; - } - else - { - abortcplt = 0U; - } - } - } - - /* Abort the UART DMA Rx channel if enabled */ - if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR)) - { - /* Disable the UART DMA Rx request if enabled */ - ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR); - - /* Abort the UART DMA Rx channel : use non blocking DMA Abort API (callback) */ - if (huart->hdmarx != NULL) - { - /* UART Rx DMA Abort callback has already been initialised : - will lead to call HAL_UART_AbortCpltCallback() at end of DMA abort procedure */ - - /* Abort DMA RX */ - if (HAL_DMA_Abort_IT(huart->hdmarx) != HAL_OK) - { - huart->hdmarx->XferAbortCallback = NULL; - abortcplt = 1U; - } - else - { - abortcplt = 0U; - } - } - } - - /* if no DMA abort complete callback execution is required => call user Abort Complete callback */ - if (abortcplt == 1U) - { - /* Reset Tx and Rx transfer counters */ - huart->TxXferCount = 0U; - huart->RxXferCount = 0U; - - /* Clear ISR function pointers */ - huart->RxISR = NULL; - huart->TxISR = NULL; - - /* Reset errorCode */ - huart->ErrorCode = HAL_UART_ERROR_NONE; - - /* Clear the Error flags in the ICR register */ - __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_OREF | UART_CLEAR_NEF | UART_CLEAR_PEF | UART_CLEAR_FEF); - -#if defined(USART_CR1_FIFOEN) - /* Flush the whole TX FIFO (if needed) */ - if (huart->FifoMode == UART_FIFOMODE_ENABLE) - { - __HAL_UART_SEND_REQ(huart, UART_TXDATA_FLUSH_REQUEST); - } -#endif /* USART_CR1_FIFOEN */ - - /* Discard the received data */ - __HAL_UART_SEND_REQ(huart, UART_RXDATA_FLUSH_REQUEST); - - /* Restore huart->gState and huart->RxState to Ready */ - huart->gState = HAL_UART_STATE_READY; - huart->RxState = HAL_UART_STATE_READY; - huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; - - /* As no DMA to be aborted, call directly user Abort complete callback */ -#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) - /* Call registered Abort complete callback */ - huart->AbortCpltCallback(huart); -#else - /* Call legacy weak Abort complete callback */ - HAL_UART_AbortCpltCallback(huart); -#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ - } - - return HAL_OK; -} - -/** - * @brief Abort ongoing Transmit transfer (Interrupt mode). - * @param huart UART handle. - * @note This procedure could be used for aborting any ongoing Tx transfer started in Interrupt or DMA mode. - * This procedure performs following operations : - * - Disable UART Interrupts (Tx) - * - Disable the DMA transfer in the peripheral register (if enabled) - * - Abort DMA transfer by calling HAL_DMA_Abort_IT (in case of transfer in DMA mode) - * - Set handle State to READY - * - At abort completion, call user abort complete callback - * @note This procedure is executed in Interrupt mode, meaning that abort procedure could be - * considered as completed only when user abort complete callback is executed (not when exiting function). - * @retval HAL status - */ -HAL_StatusTypeDef HAL_UART_AbortTransmit_IT(UART_HandleTypeDef *huart) -{ - /* Disable interrupts */ -#if defined(USART_CR1_FIFOEN) - ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_TCIE | USART_CR1_TXEIE_TXFNFIE)); - ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_TXFTIE); -#else - ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_TXEIE | USART_CR1_TCIE)); -#endif /* USART_CR1_FIFOEN */ - - /* Abort the UART DMA Tx channel if enabled */ - if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAT)) - { - /* Disable the UART DMA Tx request if enabled */ - ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAT); - - /* Abort the UART DMA Tx channel : use non blocking DMA Abort API (callback) */ - if (huart->hdmatx != NULL) - { - /* Set the UART DMA Abort callback : - will lead to call HAL_UART_AbortCpltCallback() at end of DMA abort procedure */ - huart->hdmatx->XferAbortCallback = UART_DMATxOnlyAbortCallback; - - /* Abort DMA TX */ - if (HAL_DMA_Abort_IT(huart->hdmatx) != HAL_OK) - { - /* Call Directly huart->hdmatx->XferAbortCallback function in case of error */ - huart->hdmatx->XferAbortCallback(huart->hdmatx); - } - } - else - { - /* Reset Tx transfer counter */ - huart->TxXferCount = 0U; - - /* Clear TxISR function pointers */ - huart->TxISR = NULL; - - /* Restore huart->gState to Ready */ - huart->gState = HAL_UART_STATE_READY; - - /* As no DMA to be aborted, call directly user Abort complete callback */ -#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) - /* Call registered Abort Transmit Complete Callback */ - huart->AbortTransmitCpltCallback(huart); -#else - /* Call legacy weak Abort Transmit Complete Callback */ - HAL_UART_AbortTransmitCpltCallback(huart); -#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ - } - } - else - { - /* Reset Tx transfer counter */ - huart->TxXferCount = 0U; - - /* Clear TxISR function pointers */ - huart->TxISR = NULL; - -#if defined(USART_CR1_FIFOEN) - /* Flush the whole TX FIFO (if needed) */ - if (huart->FifoMode == UART_FIFOMODE_ENABLE) - { - __HAL_UART_SEND_REQ(huart, UART_TXDATA_FLUSH_REQUEST); - } -#endif /* USART_CR1_FIFOEN */ - - /* Restore huart->gState to Ready */ - huart->gState = HAL_UART_STATE_READY; - - /* As no DMA to be aborted, call directly user Abort complete callback */ -#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) - /* Call registered Abort Transmit Complete Callback */ - huart->AbortTransmitCpltCallback(huart); -#else - /* Call legacy weak Abort Transmit Complete Callback */ - HAL_UART_AbortTransmitCpltCallback(huart); -#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ - } - - return HAL_OK; -} - -/** - * @brief Abort ongoing Receive transfer (Interrupt mode). - * @param huart UART handle. - * @note This procedure could be used for aborting any ongoing Rx transfer started in Interrupt or DMA mode. - * This procedure performs following operations : - * - Disable UART Interrupts (Rx) - * - Disable the DMA transfer in the peripheral register (if enabled) - * - Abort DMA transfer by calling HAL_DMA_Abort_IT (in case of transfer in DMA mode) - * - Set handle State to READY - * - At abort completion, call user abort complete callback - * @note This procedure is executed in Interrupt mode, meaning that abort procedure could be - * considered as completed only when user abort complete callback is executed (not when exiting function). - * @retval HAL status - */ -HAL_StatusTypeDef HAL_UART_AbortReceive_IT(UART_HandleTypeDef *huart) -{ - /* Disable RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts */ -#if defined(USART_CR1_FIFOEN) - ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_PEIE | USART_CR1_RXNEIE_RXFNEIE)); - ATOMIC_CLEAR_BIT(huart->Instance->CR3, (USART_CR3_EIE | USART_CR3_RXFTIE)); -#else - ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE | USART_CR1_PEIE)); - ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE); -#endif /* USART_CR1_FIFOEN */ - - /* If Reception till IDLE event was ongoing, disable IDLEIE interrupt */ - if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) - { - ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_IDLEIE)); - } - - /* Abort the UART DMA Rx channel if enabled */ - if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR)) - { - /* Disable the UART DMA Rx request if enabled */ - ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR); - - /* Abort the UART DMA Rx channel : use non blocking DMA Abort API (callback) */ - if (huart->hdmarx != NULL) - { - /* Set the UART DMA Abort callback : - will lead to call HAL_UART_AbortCpltCallback() at end of DMA abort procedure */ - huart->hdmarx->XferAbortCallback = UART_DMARxOnlyAbortCallback; - - /* Abort DMA RX */ - if (HAL_DMA_Abort_IT(huart->hdmarx) != HAL_OK) - { - /* Call Directly huart->hdmarx->XferAbortCallback function in case of error */ - huart->hdmarx->XferAbortCallback(huart->hdmarx); - } - } - else - { - /* Reset Rx transfer counter */ - huart->RxXferCount = 0U; - - /* Clear RxISR function pointer */ - huart->pRxBuffPtr = NULL; - - /* Clear the Error flags in the ICR register */ - __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_OREF | UART_CLEAR_NEF | UART_CLEAR_PEF | UART_CLEAR_FEF); - - /* Discard the received data */ - __HAL_UART_SEND_REQ(huart, UART_RXDATA_FLUSH_REQUEST); - - /* Restore huart->RxState to Ready */ - huart->RxState = HAL_UART_STATE_READY; - huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; - - /* As no DMA to be aborted, call directly user Abort complete callback */ -#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) - /* Call registered Abort Receive Complete Callback */ - huart->AbortReceiveCpltCallback(huart); -#else - /* Call legacy weak Abort Receive Complete Callback */ - HAL_UART_AbortReceiveCpltCallback(huart); -#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ - } - } - else - { - /* Reset Rx transfer counter */ - huart->RxXferCount = 0U; - - /* Clear RxISR function pointer */ - huart->pRxBuffPtr = NULL; - - /* Clear the Error flags in the ICR register */ - __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_OREF | UART_CLEAR_NEF | UART_CLEAR_PEF | UART_CLEAR_FEF); - - /* Restore huart->RxState to Ready */ - huart->RxState = HAL_UART_STATE_READY; - huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; - - /* As no DMA to be aborted, call directly user Abort complete callback */ -#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) - /* Call registered Abort Receive Complete Callback */ - huart->AbortReceiveCpltCallback(huart); -#else - /* Call legacy weak Abort Receive Complete Callback */ - HAL_UART_AbortReceiveCpltCallback(huart); -#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ - } - - return HAL_OK; -} - -/** - * @brief Handle UART interrupt request. - * @param huart UART handle. - * @retval None - */ -void HAL_UART_IRQHandler(UART_HandleTypeDef *huart) -{ - uint32_t isrflags = READ_REG(huart->Instance->ISR); - uint32_t cr1its = READ_REG(huart->Instance->CR1); - uint32_t cr3its = READ_REG(huart->Instance->CR3); - - uint32_t errorflags; - uint32_t errorcode; - - /* If no error occurs */ - errorflags = (isrflags & (uint32_t)(USART_ISR_PE | USART_ISR_FE | USART_ISR_ORE | USART_ISR_NE | USART_ISR_RTOF)); - if (errorflags == 0U) - { - /* UART in mode Receiver ---------------------------------------------------*/ -#if defined(USART_CR1_FIFOEN) - if (((isrflags & USART_ISR_RXNE_RXFNE) != 0U) - && (((cr1its & USART_CR1_RXNEIE_RXFNEIE) != 0U) - || ((cr3its & USART_CR3_RXFTIE) != 0U))) -#else - if (((isrflags & USART_ISR_RXNE) != 0U) - && ((cr1its & USART_CR1_RXNEIE) != 0U)) -#endif /* USART_CR1_FIFOEN */ - { - if (huart->RxISR != NULL) - { - huart->RxISR(huart); - } - return; - } - } - - /* If some errors occur */ -#if defined(USART_CR1_FIFOEN) - if ((errorflags != 0U) - && ((((cr3its & (USART_CR3_RXFTIE | USART_CR3_EIE)) != 0U) - || ((cr1its & (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE | USART_CR1_RTOIE)) != 0U)))) -#else - if ((errorflags != 0U) - && (((cr3its & USART_CR3_EIE) != 0U) - || ((cr1its & (USART_CR1_RXNEIE | USART_CR1_PEIE | USART_CR1_RTOIE)) != 0U))) -#endif /* USART_CR1_FIFOEN */ - { - /* UART parity error interrupt occurred -------------------------------------*/ - if (((isrflags & USART_ISR_PE) != 0U) && ((cr1its & USART_CR1_PEIE) != 0U)) - { - __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_PEF); - - huart->ErrorCode |= HAL_UART_ERROR_PE; - } - - /* UART frame error interrupt occurred --------------------------------------*/ - if (((isrflags & USART_ISR_FE) != 0U) && ((cr3its & USART_CR3_EIE) != 0U)) - { - __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_FEF); - - huart->ErrorCode |= HAL_UART_ERROR_FE; - } - - /* UART noise error interrupt occurred --------------------------------------*/ - if (((isrflags & USART_ISR_NE) != 0U) && ((cr3its & USART_CR3_EIE) != 0U)) - { - __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_NEF); - - huart->ErrorCode |= HAL_UART_ERROR_NE; - } - - /* UART Over-Run interrupt occurred -----------------------------------------*/ -#if defined(USART_CR1_FIFOEN) - if (((isrflags & USART_ISR_ORE) != 0U) - && (((cr1its & USART_CR1_RXNEIE_RXFNEIE) != 0U) || - ((cr3its & (USART_CR3_RXFTIE | USART_CR3_EIE)) != 0U))) -#else - if (((isrflags & USART_ISR_ORE) != 0U) - && (((cr1its & USART_CR1_RXNEIE) != 0U) || - ((cr3its & USART_CR3_EIE) != 0U))) -#endif /* USART_CR1_FIFOEN */ - { - __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_OREF); - - huart->ErrorCode |= HAL_UART_ERROR_ORE; - } - - /* UART Receiver Timeout interrupt occurred ---------------------------------*/ - if (((isrflags & USART_ISR_RTOF) != 0U) && ((cr1its & USART_CR1_RTOIE) != 0U)) - { - __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_RTOF); - - huart->ErrorCode |= HAL_UART_ERROR_RTO; - } - - /* Call UART Error Call back function if need be ----------------------------*/ - if (huart->ErrorCode != HAL_UART_ERROR_NONE) - { - /* UART in mode Receiver --------------------------------------------------*/ -#if defined(USART_CR1_FIFOEN) - if (((isrflags & USART_ISR_RXNE_RXFNE) != 0U) - && (((cr1its & USART_CR1_RXNEIE_RXFNEIE) != 0U) - || ((cr3its & USART_CR3_RXFTIE) != 0U))) -#else - if (((isrflags & USART_ISR_RXNE) != 0U) - && ((cr1its & USART_CR1_RXNEIE) != 0U)) -#endif /* USART_CR1_FIFOEN */ - { - if (huart->RxISR != NULL) - { - huart->RxISR(huart); - } - } - - /* If Error is to be considered as blocking : - - Receiver Timeout error in Reception - - Overrun error in Reception - - any error occurs in DMA mode reception - */ - errorcode = huart->ErrorCode; - if ((HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR)) || - ((errorcode & (HAL_UART_ERROR_RTO | HAL_UART_ERROR_ORE)) != 0U)) - { - /* Blocking error : transfer is aborted - Set the UART state ready to be able to start again the process, - Disable Rx Interrupts, and disable Rx DMA request, if ongoing */ - UART_EndRxTransfer(huart); - - /* Abort the UART DMA Rx channel if enabled */ - if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR)) - { - /* Disable the UART DMA Rx request if enabled */ - ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR); - - /* Abort the UART DMA Rx channel */ - if (huart->hdmarx != NULL) - { - /* Set the UART DMA Abort callback : - will lead to call HAL_UART_ErrorCallback() at end of DMA abort procedure */ - huart->hdmarx->XferAbortCallback = UART_DMAAbortOnError; - - /* Abort DMA RX */ - if (HAL_DMA_Abort_IT(huart->hdmarx) != HAL_OK) - { - /* Call Directly huart->hdmarx->XferAbortCallback function in case of error */ - huart->hdmarx->XferAbortCallback(huart->hdmarx); - } - } - else - { - /* Call user error callback */ -#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) - /*Call registered error callback*/ - huart->ErrorCallback(huart); -#else - /*Call legacy weak error callback*/ - HAL_UART_ErrorCallback(huart); -#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ - - } - } - else - { - /* Call user error callback */ -#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) - /*Call registered error callback*/ - huart->ErrorCallback(huart); -#else - /*Call legacy weak error callback*/ - HAL_UART_ErrorCallback(huart); -#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ - } - } - else - { - /* Non Blocking error : transfer could go on. - Error is notified to user through user error callback */ -#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) - /*Call registered error callback*/ - huart->ErrorCallback(huart); -#else - /*Call legacy weak error callback*/ - HAL_UART_ErrorCallback(huart); -#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ - huart->ErrorCode = HAL_UART_ERROR_NONE; - } - } - return; - - } /* End if some error occurs */ - - /* Check current reception Mode : - If Reception till IDLE event has been selected : */ - if ((huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) - && ((isrflags & USART_ISR_IDLE) != 0U) - && ((cr1its & USART_ISR_IDLE) != 0U)) - { - __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_IDLEF); - - /* Check if DMA mode is enabled in UART */ - if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR)) - { - /* DMA mode enabled */ - /* Check received length : If all expected data are received, do nothing, - (DMA cplt callback will be called). - Otherwise, if at least one data has already been received, IDLE event is to be notified to user */ - uint16_t nb_remaining_rx_data = (uint16_t) __HAL_DMA_GET_COUNTER(huart->hdmarx); - if ((nb_remaining_rx_data > 0U) - && (nb_remaining_rx_data < huart->RxXferSize)) - { - /* Reception is not complete */ - huart->RxXferCount = nb_remaining_rx_data; - - /* In Normal mode, end DMA xfer and HAL UART Rx process*/ - if (HAL_IS_BIT_CLR(huart->hdmarx->Instance->CCR, DMA_CCR_CIRC)) - { - /* Disable PE and ERR (Frame error, noise error, overrun error) interrupts */ - ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_PEIE); - ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE); - - /* Disable the DMA transfer for the receiver request by resetting the DMAR bit - in the UART CR3 register */ - ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR); - - /* At end of Rx process, restore huart->RxState to Ready */ - huart->RxState = HAL_UART_STATE_READY; - huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; - - ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_IDLEIE); - - /* Last bytes received, so no need as the abort is immediate */ - (void)HAL_DMA_Abort(huart->hdmarx); - } -#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) - /*Call registered Rx Event callback*/ - huart->RxEventCallback(huart, (huart->RxXferSize - huart->RxXferCount)); -#else - /*Call legacy weak Rx Event callback*/ - HAL_UARTEx_RxEventCallback(huart, (huart->RxXferSize - huart->RxXferCount)); -#endif /* (USE_HAL_UART_REGISTER_CALLBACKS) */ - } - return; - } - else - { - /* DMA mode not enabled */ - /* Check received length : If all expected data are received, do nothing. - Otherwise, if at least one data has already been received, IDLE event is to be notified to user */ - uint16_t nb_rx_data = huart->RxXferSize - huart->RxXferCount; - if ((huart->RxXferCount > 0U) - && (nb_rx_data > 0U)) - { -#if defined(USART_CR1_FIFOEN) - /* Disable the UART Parity Error Interrupt and RXNE interrupts */ - ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE)); - - /* Disable the UART Error Interrupt:(Frame error, noise error, overrun error) and RX FIFO Threshold interrupt */ - ATOMIC_CLEAR_BIT(huart->Instance->CR3, (USART_CR3_EIE | USART_CR3_RXFTIE)); -#else - /* Disable the UART Parity Error Interrupt and RXNE interrupts */ - ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE | USART_CR1_PEIE)); - - /* Disable the UART Error Interrupt: (Frame error, noise error, overrun error) */ - ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE); -#endif /* USART_CR1_FIFOEN */ - - /* Rx process is completed, restore huart->RxState to Ready */ - huart->RxState = HAL_UART_STATE_READY; - huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; - - /* Clear RxISR function pointer */ - huart->RxISR = NULL; - - ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_IDLEIE); -#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) - /*Call registered Rx complete callback*/ - huart->RxEventCallback(huart, nb_rx_data); -#else - /*Call legacy weak Rx Event callback*/ - HAL_UARTEx_RxEventCallback(huart, nb_rx_data); -#endif /* (USE_HAL_UART_REGISTER_CALLBACKS) */ - } - return; - } - } - - /* UART wakeup from Stop mode interrupt occurred ---------------------------*/ - if (((isrflags & USART_ISR_WUF) != 0U) && ((cr3its & USART_CR3_WUFIE) != 0U)) - { - __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_WUF); - - /* UART Rx state is not reset as a reception process might be ongoing. - If UART handle state fields need to be reset to READY, this could be done in Wakeup callback */ - -#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) - /* Call registered Wakeup Callback */ - huart->WakeupCallback(huart); -#else - /* Call legacy weak Wakeup Callback */ - HAL_UARTEx_WakeupCallback(huart); -#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ - return; - } - - /* UART in mode Transmitter ------------------------------------------------*/ -#if defined(USART_CR1_FIFOEN) - if (((isrflags & USART_ISR_TXE_TXFNF) != 0U) - && (((cr1its & USART_CR1_TXEIE_TXFNFIE) != 0U) - || ((cr3its & USART_CR3_TXFTIE) != 0U))) -#else - if (((isrflags & USART_ISR_TXE) != 0U) - && ((cr1its & USART_CR1_TXEIE) != 0U)) -#endif /* USART_CR1_FIFOEN */ - { - if (huart->TxISR != NULL) - { - huart->TxISR(huart); - } - return; - } - - /* UART in mode Transmitter (transmission end) -----------------------------*/ - if (((isrflags & USART_ISR_TC) != 0U) && ((cr1its & USART_CR1_TCIE) != 0U)) - { - UART_EndTransmit_IT(huart); - return; - } - -#if defined(USART_CR1_FIFOEN) - /* UART TX Fifo Empty occurred ----------------------------------------------*/ - if (((isrflags & USART_ISR_TXFE) != 0U) && ((cr1its & USART_CR1_TXFEIE) != 0U)) - { -#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) - /* Call registered Tx Fifo Empty Callback */ - huart->TxFifoEmptyCallback(huart); -#else - /* Call legacy weak Tx Fifo Empty Callback */ - HAL_UARTEx_TxFifoEmptyCallback(huart); -#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ - return; - } - - /* UART RX Fifo Full occurred ----------------------------------------------*/ - if (((isrflags & USART_ISR_RXFF) != 0U) && ((cr1its & USART_CR1_RXFFIE) != 0U)) - { -#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) - /* Call registered Rx Fifo Full Callback */ - huart->RxFifoFullCallback(huart); -#else - /* Call legacy weak Rx Fifo Full Callback */ - HAL_UARTEx_RxFifoFullCallback(huart); -#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ - return; - } -#endif /* USART_CR1_FIFOEN */ -} - -/** - * @brief Tx Transfer completed callback. - * @param huart UART handle. - * @retval None - */ -__weak void HAL_UART_TxCpltCallback(UART_HandleTypeDef *huart) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(huart); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_UART_TxCpltCallback can be implemented in the user file. - */ -} - -/** - * @brief Tx Half Transfer completed callback. - * @param huart UART handle. - * @retval None - */ -__weak void HAL_UART_TxHalfCpltCallback(UART_HandleTypeDef *huart) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(huart); - - /* NOTE: This function should not be modified, when the callback is needed, - the HAL_UART_TxHalfCpltCallback can be implemented in the user file. - */ -} - -/** - * @brief Rx Transfer completed callback. - * @param huart UART handle. - * @retval None - */ -__weak void HAL_UART_RxCpltCallback(UART_HandleTypeDef *huart) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(huart); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_UART_RxCpltCallback can be implemented in the user file. - */ -} - -/** - * @brief Rx Half Transfer completed callback. - * @param huart UART handle. - * @retval None - */ -__weak void HAL_UART_RxHalfCpltCallback(UART_HandleTypeDef *huart) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(huart); - - /* NOTE: This function should not be modified, when the callback is needed, - the HAL_UART_RxHalfCpltCallback can be implemented in the user file. - */ -} - -/** - * @brief UART error callback. - * @param huart UART handle. - * @retval None - */ -__weak void HAL_UART_ErrorCallback(UART_HandleTypeDef *huart) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(huart); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_UART_ErrorCallback can be implemented in the user file. - */ -} - -/** - * @brief UART Abort Complete callback. - * @param huart UART handle. - * @retval None - */ -__weak void HAL_UART_AbortCpltCallback(UART_HandleTypeDef *huart) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(huart); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_UART_AbortCpltCallback can be implemented in the user file. - */ -} - -/** - * @brief UART Abort Complete callback. - * @param huart UART handle. - * @retval None - */ -__weak void HAL_UART_AbortTransmitCpltCallback(UART_HandleTypeDef *huart) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(huart); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_UART_AbortTransmitCpltCallback can be implemented in the user file. - */ -} - -/** - * @brief UART Abort Receive Complete callback. - * @param huart UART handle. - * @retval None - */ -__weak void HAL_UART_AbortReceiveCpltCallback(UART_HandleTypeDef *huart) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(huart); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_UART_AbortReceiveCpltCallback can be implemented in the user file. - */ -} - -/** - * @brief Reception Event Callback (Rx event notification called after use of advanced reception service). - * @param huart UART handle - * @param Size Number of data available in application reception buffer (indicates a position in - * reception buffer until which, data are available) - * @retval None - */ -__weak void HAL_UARTEx_RxEventCallback(UART_HandleTypeDef *huart, uint16_t Size) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(huart); - UNUSED(Size); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_UARTEx_RxEventCallback can be implemented in the user file. - */ -} - -/** - * @} - */ - -/** @defgroup UART_Exported_Functions_Group3 Peripheral Control functions - * @brief UART control functions - * -@verbatim - =============================================================================== - ##### Peripheral Control functions ##### - =============================================================================== - [..] - This subsection provides a set of functions allowing to control the UART. - (+) HAL_UART_ReceiverTimeout_Config() API allows to configure the receiver timeout value on the fly - (+) HAL_UART_EnableReceiverTimeout() API enables the receiver timeout feature - (+) HAL_UART_DisableReceiverTimeout() API disables the receiver timeout feature - (+) HAL_MultiProcessor_EnableMuteMode() API enables mute mode - (+) HAL_MultiProcessor_DisableMuteMode() API disables mute mode - (+) HAL_MultiProcessor_EnterMuteMode() API enters mute mode - (+) UART_SetConfig() API configures the UART peripheral - (+) UART_AdvFeatureConfig() API optionally configures the UART advanced features - (+) UART_CheckIdleState() API ensures that TEACK and/or REACK are set after initialization - (+) HAL_HalfDuplex_EnableTransmitter() API disables receiver and enables transmitter - (+) HAL_HalfDuplex_EnableReceiver() API disables transmitter and enables receiver - (+) HAL_LIN_SendBreak() API transmits the break characters -@endverbatim - * @{ - */ - -/** - * @brief Update on the fly the receiver timeout value in RTOR register. - * @param huart Pointer to a UART_HandleTypeDef structure that contains - * the configuration information for the specified UART module. - * @param TimeoutValue receiver timeout value in number of baud blocks. The timeout - * value must be less or equal to 0x0FFFFFFFF. - * @retval None - */ -void HAL_UART_ReceiverTimeout_Config(UART_HandleTypeDef *huart, uint32_t TimeoutValue) -{ - if (!(IS_LPUART_INSTANCE(huart->Instance))) - { - assert_param(IS_UART_RECEIVER_TIMEOUT_VALUE(TimeoutValue)); - MODIFY_REG(huart->Instance->RTOR, USART_RTOR_RTO, TimeoutValue); - } -} - -/** - * @brief Enable the UART receiver timeout feature. - * @param huart Pointer to a UART_HandleTypeDef structure that contains - * the configuration information for the specified UART module. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_UART_EnableReceiverTimeout(UART_HandleTypeDef *huart) -{ - if (!(IS_LPUART_INSTANCE(huart->Instance))) - { - if (huart->gState == HAL_UART_STATE_READY) - { - /* Process Locked */ - __HAL_LOCK(huart); - - huart->gState = HAL_UART_STATE_BUSY; - - /* Set the USART RTOEN bit */ - SET_BIT(huart->Instance->CR2, USART_CR2_RTOEN); - - huart->gState = HAL_UART_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(huart); - - return HAL_OK; - } - else - { - return HAL_BUSY; - } - } - else - { - return HAL_ERROR; - } -} - -/** - * @brief Disable the UART receiver timeout feature. - * @param huart Pointer to a UART_HandleTypeDef structure that contains - * the configuration information for the specified UART module. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_UART_DisableReceiverTimeout(UART_HandleTypeDef *huart) -{ - if (!(IS_LPUART_INSTANCE(huart->Instance))) - { - if (huart->gState == HAL_UART_STATE_READY) - { - /* Process Locked */ - __HAL_LOCK(huart); - - huart->gState = HAL_UART_STATE_BUSY; - - /* Clear the USART RTOEN bit */ - CLEAR_BIT(huart->Instance->CR2, USART_CR2_RTOEN); - - huart->gState = HAL_UART_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(huart); - - return HAL_OK; - } - else - { - return HAL_BUSY; - } - } - else - { - return HAL_ERROR; - } -} - -/** - * @brief Enable UART in mute mode (does not mean UART enters mute mode; - * to enter mute mode, HAL_MultiProcessor_EnterMuteMode() API must be called). - * @param huart UART handle. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_MultiProcessor_EnableMuteMode(UART_HandleTypeDef *huart) -{ - __HAL_LOCK(huart); - - huart->gState = HAL_UART_STATE_BUSY; - - /* Enable USART mute mode by setting the MME bit in the CR1 register */ - ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_MME); - - huart->gState = HAL_UART_STATE_READY; - - return (UART_CheckIdleState(huart)); -} - -/** - * @brief Disable UART mute mode (does not mean the UART actually exits mute mode - * as it may not have been in mute mode at this very moment). - * @param huart UART handle. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_MultiProcessor_DisableMuteMode(UART_HandleTypeDef *huart) -{ - __HAL_LOCK(huart); - - huart->gState = HAL_UART_STATE_BUSY; - - /* Disable USART mute mode by clearing the MME bit in the CR1 register */ - ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_MME); - - huart->gState = HAL_UART_STATE_READY; - - return (UART_CheckIdleState(huart)); -} - -/** - * @brief Enter UART mute mode (means UART actually enters mute mode). - * @note To exit from mute mode, HAL_MultiProcessor_DisableMuteMode() API must be called. - * @param huart UART handle. - * @retval None - */ -void HAL_MultiProcessor_EnterMuteMode(UART_HandleTypeDef *huart) -{ - __HAL_UART_SEND_REQ(huart, UART_MUTE_MODE_REQUEST); -} - -/** - * @brief Enable the UART transmitter and disable the UART receiver. - * @param huart UART handle. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_HalfDuplex_EnableTransmitter(UART_HandleTypeDef *huart) -{ - __HAL_LOCK(huart); - huart->gState = HAL_UART_STATE_BUSY; - - /* Clear TE and RE bits */ - ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_TE | USART_CR1_RE)); - - /* Enable the USART's transmit interface by setting the TE bit in the USART CR1 register */ - ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_TE); - - huart->gState = HAL_UART_STATE_READY; - - __HAL_UNLOCK(huart); - - return HAL_OK; -} - -/** - * @brief Enable the UART receiver and disable the UART transmitter. - * @param huart UART handle. - * @retval HAL status. - */ -HAL_StatusTypeDef HAL_HalfDuplex_EnableReceiver(UART_HandleTypeDef *huart) -{ - __HAL_LOCK(huart); - huart->gState = HAL_UART_STATE_BUSY; - - /* Clear TE and RE bits */ - ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_TE | USART_CR1_RE)); - - /* Enable the USART's receive interface by setting the RE bit in the USART CR1 register */ - ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_RE); - - huart->gState = HAL_UART_STATE_READY; - - __HAL_UNLOCK(huart); - - return HAL_OK; -} - - -/** - * @brief Transmit break characters. - * @param huart UART handle. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_LIN_SendBreak(UART_HandleTypeDef *huart) -{ - /* Check the parameters */ - assert_param(IS_UART_LIN_INSTANCE(huart->Instance)); - - __HAL_LOCK(huart); - - huart->gState = HAL_UART_STATE_BUSY; - - /* Send break characters */ - __HAL_UART_SEND_REQ(huart, UART_SENDBREAK_REQUEST); - - huart->gState = HAL_UART_STATE_READY; - - __HAL_UNLOCK(huart); - - return HAL_OK; -} - -/** - * @} - */ - -/** @defgroup UART_Exported_Functions_Group4 Peripheral State and Error functions - * @brief UART Peripheral State functions - * -@verbatim - ============================================================================== - ##### Peripheral State and Error functions ##### - ============================================================================== - [..] - This subsection provides functions allowing to : - (+) Return the UART handle state. - (+) Return the UART handle error code - -@endverbatim - * @{ - */ - -/** - * @brief Return the UART handle state. - * @param huart Pointer to a UART_HandleTypeDef structure that contains - * the configuration information for the specified UART. - * @retval HAL state - */ -HAL_UART_StateTypeDef HAL_UART_GetState(const UART_HandleTypeDef *huart) -{ - uint32_t temp1; - uint32_t temp2; - temp1 = huart->gState; - temp2 = huart->RxState; - - return (HAL_UART_StateTypeDef)(temp1 | temp2); -} - -/** - * @brief Return the UART handle error code. - * @param huart Pointer to a UART_HandleTypeDef structure that contains - * the configuration information for the specified UART. - * @retval UART Error Code - */ -uint32_t HAL_UART_GetError(const UART_HandleTypeDef *huart) -{ - return huart->ErrorCode; -} -/** - * @} - */ - -/** - * @} - */ - -/** @defgroup UART_Private_Functions UART Private Functions - * @{ - */ - -/** - * @brief Initialize the callbacks to their default values. - * @param huart UART handle. - * @retval none - */ -#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) -void UART_InitCallbacksToDefault(UART_HandleTypeDef *huart) -{ - /* Init the UART Callback settings */ - huart->TxHalfCpltCallback = HAL_UART_TxHalfCpltCallback; /* Legacy weak TxHalfCpltCallback */ - huart->TxCpltCallback = HAL_UART_TxCpltCallback; /* Legacy weak TxCpltCallback */ - huart->RxHalfCpltCallback = HAL_UART_RxHalfCpltCallback; /* Legacy weak RxHalfCpltCallback */ - huart->RxCpltCallback = HAL_UART_RxCpltCallback; /* Legacy weak RxCpltCallback */ - huart->ErrorCallback = HAL_UART_ErrorCallback; /* Legacy weak ErrorCallback */ - huart->AbortCpltCallback = HAL_UART_AbortCpltCallback; /* Legacy weak AbortCpltCallback */ - huart->AbortTransmitCpltCallback = HAL_UART_AbortTransmitCpltCallback; /* Legacy weak AbortTransmitCpltCallback */ - huart->AbortReceiveCpltCallback = HAL_UART_AbortReceiveCpltCallback; /* Legacy weak AbortReceiveCpltCallback */ - huart->WakeupCallback = HAL_UARTEx_WakeupCallback; /* Legacy weak WakeupCallback */ -#if defined(USART_CR1_FIFOEN) - huart->RxFifoFullCallback = HAL_UARTEx_RxFifoFullCallback; /* Legacy weak RxFifoFullCallback */ - huart->TxFifoEmptyCallback = HAL_UARTEx_TxFifoEmptyCallback; /* Legacy weak TxFifoEmptyCallback */ -#endif /* USART_CR1_FIFOEN */ - huart->RxEventCallback = HAL_UARTEx_RxEventCallback; /* Legacy weak RxEventCallback */ - -} -#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ - -/** - * @brief Configure the UART peripheral. - * @param huart UART handle. - * @retval HAL status - */ -HAL_StatusTypeDef UART_SetConfig(UART_HandleTypeDef *huart) -{ - uint32_t tmpreg; - uint16_t brrtemp; - UART_ClockSourceTypeDef clocksource; - uint32_t usartdiv; - HAL_StatusTypeDef ret = HAL_OK; -#if defined(USART_PRESC_PRESCALER) - uint32_t lpuart_ker_ck_pres; -#endif /* USART_PRESC_PRESCALER */ - uint32_t pclk; - - /* Check the parameters */ - assert_param(IS_UART_BAUDRATE(huart->Init.BaudRate)); - assert_param(IS_UART_WORD_LENGTH(huart->Init.WordLength)); - if (UART_INSTANCE_LOWPOWER(huart)) - { - assert_param(IS_LPUART_STOPBITS(huart->Init.StopBits)); - } - else - { - assert_param(IS_UART_STOPBITS(huart->Init.StopBits)); - assert_param(IS_UART_ONE_BIT_SAMPLE(huart->Init.OneBitSampling)); - } - - assert_param(IS_UART_PARITY(huart->Init.Parity)); - assert_param(IS_UART_MODE(huart->Init.Mode)); - assert_param(IS_UART_HARDWARE_FLOW_CONTROL(huart->Init.HwFlowCtl)); - assert_param(IS_UART_OVERSAMPLING(huart->Init.OverSampling)); -#if defined(USART_PRESC_PRESCALER) - assert_param(IS_UART_PRESCALER(huart->Init.ClockPrescaler)); -#endif /* USART_PRESC_PRESCALER */ - - /*-------------------------- USART CR1 Configuration -----------------------*/ - /* Clear M, PCE, PS, TE, RE and OVER8 bits and configure - * the UART Word Length, Parity, Mode and oversampling: - * set the M bits according to huart->Init.WordLength value - * set PCE and PS bits according to huart->Init.Parity value - * set TE and RE bits according to huart->Init.Mode value - * set OVER8 bit according to huart->Init.OverSampling value */ - tmpreg = (uint32_t)huart->Init.WordLength | huart->Init.Parity | huart->Init.Mode | huart->Init.OverSampling ; - MODIFY_REG(huart->Instance->CR1, USART_CR1_FIELDS, tmpreg); - - /*-------------------------- USART CR2 Configuration -----------------------*/ - /* Configure the UART Stop Bits: Set STOP[13:12] bits according - * to huart->Init.StopBits value */ - MODIFY_REG(huart->Instance->CR2, USART_CR2_STOP, huart->Init.StopBits); - - /*-------------------------- USART CR3 Configuration -----------------------*/ - /* Configure - * - UART HardWare Flow Control: set CTSE and RTSE bits according - * to huart->Init.HwFlowCtl value - * - one-bit sampling method versus three samples' majority rule according - * to huart->Init.OneBitSampling (not applicable to LPUART) */ - tmpreg = (uint32_t)huart->Init.HwFlowCtl; - - if (!(UART_INSTANCE_LOWPOWER(huart))) - { - tmpreg |= huart->Init.OneBitSampling; - } - MODIFY_REG(huart->Instance->CR3, USART_CR3_FIELDS, tmpreg); - -#if defined(USART_PRESC_PRESCALER) - /*-------------------------- USART PRESC Configuration -----------------------*/ - /* Configure - * - UART Clock Prescaler : set PRESCALER according to huart->Init.ClockPrescaler value */ - MODIFY_REG(huart->Instance->PRESC, USART_PRESC_PRESCALER, huart->Init.ClockPrescaler); -#endif /* USART_PRESC_PRESCALER */ - - /*-------------------------- USART BRR Configuration -----------------------*/ - UART_GETCLOCKSOURCE(huart, clocksource); - - /* Check LPUART instance */ - if (UART_INSTANCE_LOWPOWER(huart)) - { - /* Retrieve frequency clock */ - switch (clocksource) - { - case UART_CLOCKSOURCE_PCLK1: - pclk = HAL_RCC_GetPCLK1Freq(); - break; - case UART_CLOCKSOURCE_HSI: - pclk = (uint32_t) HSI_VALUE; - break; - case UART_CLOCKSOURCE_SYSCLK: - pclk = HAL_RCC_GetSysClockFreq(); - break; - case UART_CLOCKSOURCE_LSE: - pclk = (uint32_t) LSE_VALUE; - break; - default: - pclk = 0U; - ret = HAL_ERROR; - break; - } - - /* If proper clock source reported */ - if (pclk != 0U) - { -#if defined(USART_PRESC_PRESCALER) - /* Compute clock after Prescaler */ - lpuart_ker_ck_pres = (pclk / UARTPrescTable[huart->Init.ClockPrescaler]); - - /* Ensure that Frequency clock is in the range [3 * baudrate, 4096 * baudrate] */ - if ((lpuart_ker_ck_pres < (3U * huart->Init.BaudRate)) || - (lpuart_ker_ck_pres > (4096U * huart->Init.BaudRate))) - { - ret = HAL_ERROR; - } - else - { - /* Check computed UsartDiv value is in allocated range - (it is forbidden to write values lower than 0x300 in the LPUART_BRR register) */ - usartdiv = (uint32_t)(UART_DIV_LPUART(pclk, huart->Init.BaudRate, huart->Init.ClockPrescaler)); - if ((usartdiv >= LPUART_BRR_MIN) && (usartdiv <= LPUART_BRR_MAX)) - { - huart->Instance->BRR = usartdiv; - } - else - { - ret = HAL_ERROR; - } - } /* if ( (lpuart_ker_ck_pres < (3 * huart->Init.BaudRate) ) || - (lpuart_ker_ck_pres > (4096 * huart->Init.BaudRate) )) */ -#else - /* No Prescaler applicable */ - /* Ensure that Frequency clock is in the range [3 * baudrate, 4096 * baudrate] */ - if ((pclk < (3U * huart->Init.BaudRate)) || - (pclk > (4096U * huart->Init.BaudRate))) - { - ret = HAL_ERROR; - } - else - { - usartdiv = (uint32_t)(UART_DIV_LPUART(pclk, huart->Init.BaudRate)); - if ((usartdiv >= LPUART_BRR_MIN) && (usartdiv <= LPUART_BRR_MAX)) - { - huart->Instance->BRR = usartdiv; - } - else - { - ret = HAL_ERROR; - } - } /* if ( (pclk < (3 * huart->Init.BaudRate) ) || (pclk > (4096 * huart->Init.BaudRate) )) */ -#endif /* USART_PRESC_PRESCALER */ - } /* if (pclk != 0) */ - } - /* Check UART Over Sampling to set Baud Rate Register */ - else if (huart->Init.OverSampling == UART_OVERSAMPLING_8) - { - switch (clocksource) - { - case UART_CLOCKSOURCE_PCLK1: - pclk = HAL_RCC_GetPCLK1Freq(); - break; - case UART_CLOCKSOURCE_PCLK2: - pclk = HAL_RCC_GetPCLK2Freq(); - break; - case UART_CLOCKSOURCE_HSI: - pclk = (uint32_t) HSI_VALUE; - break; - case UART_CLOCKSOURCE_SYSCLK: - pclk = HAL_RCC_GetSysClockFreq(); - break; - case UART_CLOCKSOURCE_LSE: - pclk = (uint32_t) LSE_VALUE; - break; - default: - pclk = 0U; - ret = HAL_ERROR; - break; - } - - /* USARTDIV must be greater than or equal to 0d16 */ - if (pclk != 0U) - { -#if defined(USART_PRESC_PRESCALER) - usartdiv = (uint32_t)(UART_DIV_SAMPLING8(pclk, huart->Init.BaudRate, huart->Init.ClockPrescaler)); -#else - usartdiv = (uint32_t)(UART_DIV_SAMPLING8(pclk, huart->Init.BaudRate)); -#endif /* USART_PRESC_PRESCALER */ - if ((usartdiv >= UART_BRR_MIN) && (usartdiv <= UART_BRR_MAX)) - { - brrtemp = (uint16_t)(usartdiv & 0xFFF0U); - brrtemp |= (uint16_t)((usartdiv & (uint16_t)0x000FU) >> 1U); - huart->Instance->BRR = brrtemp; - } - else - { - ret = HAL_ERROR; - } - } - } - else - { - switch (clocksource) - { - case UART_CLOCKSOURCE_PCLK1: - pclk = HAL_RCC_GetPCLK1Freq(); - break; - case UART_CLOCKSOURCE_PCLK2: - pclk = HAL_RCC_GetPCLK2Freq(); - break; - case UART_CLOCKSOURCE_HSI: - pclk = (uint32_t) HSI_VALUE; - break; - case UART_CLOCKSOURCE_SYSCLK: - pclk = HAL_RCC_GetSysClockFreq(); - break; - case UART_CLOCKSOURCE_LSE: - pclk = (uint32_t) LSE_VALUE; - break; - default: - pclk = 0U; - ret = HAL_ERROR; - break; - } - - if (pclk != 0U) - { - /* USARTDIV must be greater than or equal to 0d16 */ -#if defined(USART_PRESC_PRESCALER) - usartdiv = (uint32_t)(UART_DIV_SAMPLING16(pclk, huart->Init.BaudRate, huart->Init.ClockPrescaler)); -#else - usartdiv = (uint32_t)(UART_DIV_SAMPLING16(pclk, huart->Init.BaudRate)); -#endif /* USART_PRESC_PRESCALER */ - if ((usartdiv >= UART_BRR_MIN) && (usartdiv <= UART_BRR_MAX)) - { - huart->Instance->BRR = (uint16_t)usartdiv; - } - else - { - ret = HAL_ERROR; - } - } - } - -#if defined(USART_CR1_FIFOEN) - /* Initialize the number of data to process during RX/TX ISR execution */ - huart->NbTxDataToProcess = 1; - huart->NbRxDataToProcess = 1; -#endif /* USART_CR1_FIFOEN */ - - /* Clear ISR function pointers */ - huart->RxISR = NULL; - huart->TxISR = NULL; - - return ret; -} - -/** - * @brief Configure the UART peripheral advanced features. - * @param huart UART handle. - * @retval None - */ -void UART_AdvFeatureConfig(UART_HandleTypeDef *huart) -{ - /* Check whether the set of advanced features to configure is properly set */ - assert_param(IS_UART_ADVFEATURE_INIT(huart->AdvancedInit.AdvFeatureInit)); - - /* if required, configure TX pin active level inversion */ - if (HAL_IS_BIT_SET(huart->AdvancedInit.AdvFeatureInit, UART_ADVFEATURE_TXINVERT_INIT)) - { - assert_param(IS_UART_ADVFEATURE_TXINV(huart->AdvancedInit.TxPinLevelInvert)); - MODIFY_REG(huart->Instance->CR2, USART_CR2_TXINV, huart->AdvancedInit.TxPinLevelInvert); - } - - /* if required, configure RX pin active level inversion */ - if (HAL_IS_BIT_SET(huart->AdvancedInit.AdvFeatureInit, UART_ADVFEATURE_RXINVERT_INIT)) - { - assert_param(IS_UART_ADVFEATURE_RXINV(huart->AdvancedInit.RxPinLevelInvert)); - MODIFY_REG(huart->Instance->CR2, USART_CR2_RXINV, huart->AdvancedInit.RxPinLevelInvert); - } - - /* if required, configure data inversion */ - if (HAL_IS_BIT_SET(huart->AdvancedInit.AdvFeatureInit, UART_ADVFEATURE_DATAINVERT_INIT)) - { - assert_param(IS_UART_ADVFEATURE_DATAINV(huart->AdvancedInit.DataInvert)); - MODIFY_REG(huart->Instance->CR2, USART_CR2_DATAINV, huart->AdvancedInit.DataInvert); - } - - /* if required, configure RX/TX pins swap */ - if (HAL_IS_BIT_SET(huart->AdvancedInit.AdvFeatureInit, UART_ADVFEATURE_SWAP_INIT)) - { - assert_param(IS_UART_ADVFEATURE_SWAP(huart->AdvancedInit.Swap)); - MODIFY_REG(huart->Instance->CR2, USART_CR2_SWAP, huart->AdvancedInit.Swap); - } - - /* if required, configure RX overrun detection disabling */ - if (HAL_IS_BIT_SET(huart->AdvancedInit.AdvFeatureInit, UART_ADVFEATURE_RXOVERRUNDISABLE_INIT)) - { - assert_param(IS_UART_OVERRUN(huart->AdvancedInit.OverrunDisable)); - MODIFY_REG(huart->Instance->CR3, USART_CR3_OVRDIS, huart->AdvancedInit.OverrunDisable); - } - - /* if required, configure DMA disabling on reception error */ - if (HAL_IS_BIT_SET(huart->AdvancedInit.AdvFeatureInit, UART_ADVFEATURE_DMADISABLEONERROR_INIT)) - { - assert_param(IS_UART_ADVFEATURE_DMAONRXERROR(huart->AdvancedInit.DMADisableonRxError)); - MODIFY_REG(huart->Instance->CR3, USART_CR3_DDRE, huart->AdvancedInit.DMADisableonRxError); - } - - /* if required, configure auto Baud rate detection scheme */ - if (HAL_IS_BIT_SET(huart->AdvancedInit.AdvFeatureInit, UART_ADVFEATURE_AUTOBAUDRATE_INIT)) - { - assert_param(IS_USART_AUTOBAUDRATE_DETECTION_INSTANCE(huart->Instance)); - assert_param(IS_UART_ADVFEATURE_AUTOBAUDRATE(huart->AdvancedInit.AutoBaudRateEnable)); - MODIFY_REG(huart->Instance->CR2, USART_CR2_ABREN, huart->AdvancedInit.AutoBaudRateEnable); - /* set auto Baudrate detection parameters if detection is enabled */ - if (huart->AdvancedInit.AutoBaudRateEnable == UART_ADVFEATURE_AUTOBAUDRATE_ENABLE) - { - assert_param(IS_UART_ADVFEATURE_AUTOBAUDRATEMODE(huart->AdvancedInit.AutoBaudRateMode)); - MODIFY_REG(huart->Instance->CR2, USART_CR2_ABRMODE, huart->AdvancedInit.AutoBaudRateMode); - } - } - - /* if required, configure MSB first on communication line */ - if (HAL_IS_BIT_SET(huart->AdvancedInit.AdvFeatureInit, UART_ADVFEATURE_MSBFIRST_INIT)) - { - assert_param(IS_UART_ADVFEATURE_MSBFIRST(huart->AdvancedInit.MSBFirst)); - MODIFY_REG(huart->Instance->CR2, USART_CR2_MSBFIRST, huart->AdvancedInit.MSBFirst); - } -} - -/** - * @brief Check the UART Idle State. - * @param huart UART handle. - * @retval HAL status - */ -HAL_StatusTypeDef UART_CheckIdleState(UART_HandleTypeDef *huart) -{ - uint32_t tickstart; - - /* Initialize the UART ErrorCode */ - huart->ErrorCode = HAL_UART_ERROR_NONE; - - /* Init tickstart for timeout management */ - tickstart = HAL_GetTick(); - - /* Check if the Transmitter is enabled */ - if ((huart->Instance->CR1 & USART_CR1_TE) == USART_CR1_TE) - { - /* Wait until TEACK flag is set */ - if (UART_WaitOnFlagUntilTimeout(huart, USART_ISR_TEACK, RESET, tickstart, HAL_UART_TIMEOUT_VALUE) != HAL_OK) - { - /* Timeout occurred */ - return HAL_TIMEOUT; - } - } - - /* Check if the Receiver is enabled */ - if ((huart->Instance->CR1 & USART_CR1_RE) == USART_CR1_RE) - { - /* Wait until REACK flag is set */ - if (UART_WaitOnFlagUntilTimeout(huart, USART_ISR_REACK, RESET, tickstart, HAL_UART_TIMEOUT_VALUE) != HAL_OK) - { - /* Timeout occurred */ - return HAL_TIMEOUT; - } - } - - /* Initialize the UART State */ - huart->gState = HAL_UART_STATE_READY; - huart->RxState = HAL_UART_STATE_READY; - huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; - - __HAL_UNLOCK(huart); - - return HAL_OK; -} - -/** - * @brief This function handles UART Communication Timeout. It waits - * until a flag is no longer in the specified status. - * @param huart UART handle. - * @param Flag Specifies the UART flag to check - * @param Status The actual Flag status (SET or RESET) - * @param Tickstart Tick start value - * @param Timeout Timeout duration - * @retval HAL status - */ -HAL_StatusTypeDef UART_WaitOnFlagUntilTimeout(UART_HandleTypeDef *huart, uint32_t Flag, FlagStatus Status, - uint32_t Tickstart, uint32_t Timeout) -{ - /* Wait until flag is set */ - while ((__HAL_UART_GET_FLAG(huart, Flag) ? SET : RESET) == Status) - { - /* Check for the Timeout */ - if (Timeout != HAL_MAX_DELAY) - { - if (((HAL_GetTick() - Tickstart) > Timeout) || (Timeout == 0U)) - { - /* Disable TXE, RXNE, PE and ERR (Frame error, noise error, overrun error) - interrupts for the interrupt process */ -#if defined(USART_CR1_FIFOEN) - ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE | - USART_CR1_TXEIE_TXFNFIE)); -#else - ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE | USART_CR1_PEIE | USART_CR1_TXEIE)); -#endif /* USART_CR1_FIFOEN */ - ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE); - - huart->gState = HAL_UART_STATE_READY; - huart->RxState = HAL_UART_STATE_READY; - - __HAL_UNLOCK(huart); - - return HAL_TIMEOUT; - } - - if (READ_BIT(huart->Instance->CR1, USART_CR1_RE) != 0U) - { - if (__HAL_UART_GET_FLAG(huart, UART_FLAG_RTOF) == SET) - { - /* Clear Receiver Timeout flag*/ - __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_RTOF); - - /* Disable TXE, RXNE, PE and ERR (Frame error, noise error, overrun error) - interrupts for the interrupt process */ -#if defined(USART_CR1_FIFOEN) - ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE | - USART_CR1_TXEIE_TXFNFIE)); -#else - ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE | USART_CR1_PEIE | USART_CR1_TXEIE)); -#endif /* USART_CR1_FIFOEN */ - ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE); - - huart->gState = HAL_UART_STATE_READY; - huart->RxState = HAL_UART_STATE_READY; - huart->ErrorCode = HAL_UART_ERROR_RTO; - - /* Process Unlocked */ - __HAL_UNLOCK(huart); - - return HAL_TIMEOUT; - } - } - } - } - return HAL_OK; -} - -/** - * @brief Start Receive operation in interrupt mode. - * @note This function could be called by all HAL UART API providing reception in Interrupt mode. - * @note When calling this function, parameters validity is considered as already checked, - * i.e. Rx State, buffer address, ... - * UART Handle is assumed as Locked. - * @param huart UART handle. - * @param pData Pointer to data buffer (u8 or u16 data elements). - * @param Size Amount of data elements (u8 or u16) to be received. - * @retval HAL status - */ -HAL_StatusTypeDef UART_Start_Receive_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size) -{ - huart->pRxBuffPtr = pData; - huart->RxXferSize = Size; - huart->RxXferCount = Size; - huart->RxISR = NULL; - - /* Computation of UART mask to apply to RDR register */ - UART_MASK_COMPUTATION(huart); - - huart->ErrorCode = HAL_UART_ERROR_NONE; - huart->RxState = HAL_UART_STATE_BUSY_RX; - - /* Enable the UART Error Interrupt: (Frame error, noise error, overrun error) */ - ATOMIC_SET_BIT(huart->Instance->CR3, USART_CR3_EIE); - -#if defined(USART_CR1_FIFOEN) - /* Configure Rx interrupt processing */ - if ((huart->FifoMode == UART_FIFOMODE_ENABLE) && (Size >= huart->NbRxDataToProcess)) - { - /* Set the Rx ISR function pointer according to the data word length */ - if ((huart->Init.WordLength == UART_WORDLENGTH_9B) && (huart->Init.Parity == UART_PARITY_NONE)) - { - huart->RxISR = UART_RxISR_16BIT_FIFOEN; - } - else - { - huart->RxISR = UART_RxISR_8BIT_FIFOEN; - } - - __HAL_UNLOCK(huart); - - /* Enable the UART Parity Error interrupt and RX FIFO Threshold interrupt */ - if (huart->Init.Parity != UART_PARITY_NONE) - { - ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_PEIE); - } - ATOMIC_SET_BIT(huart->Instance->CR3, USART_CR3_RXFTIE); - } - else - { - /* Set the Rx ISR function pointer according to the data word length */ - if ((huart->Init.WordLength == UART_WORDLENGTH_9B) && (huart->Init.Parity == UART_PARITY_NONE)) - { - huart->RxISR = UART_RxISR_16BIT; - } - else - { - huart->RxISR = UART_RxISR_8BIT; - } - - __HAL_UNLOCK(huart); - - /* Enable the UART Parity Error interrupt and Data Register Not Empty interrupt */ - if (huart->Init.Parity != UART_PARITY_NONE) - { - ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_PEIE | USART_CR1_RXNEIE_RXFNEIE); - } - else - { - ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_RXNEIE_RXFNEIE); - } - } -#else - /* Set the Rx ISR function pointer according to the data word length */ - if ((huart->Init.WordLength == UART_WORDLENGTH_9B) && (huart->Init.Parity == UART_PARITY_NONE)) - { - huart->RxISR = UART_RxISR_16BIT; - } - else - { - huart->RxISR = UART_RxISR_8BIT; - } - - __HAL_UNLOCK(huart); - - /* Enable the UART Parity Error interrupt and Data Register Not Empty interrupt */ - if (huart->Init.Parity != UART_PARITY_NONE) - { - ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_PEIE | USART_CR1_RXNEIE); - } - else - { - ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_RXNEIE); - } -#endif /* USART_CR1_FIFOEN */ - return HAL_OK; -} - -/** - * @brief Start Receive operation in DMA mode. - * @note This function could be called by all HAL UART API providing reception in DMA mode. - * @note When calling this function, parameters validity is considered as already checked, - * i.e. Rx State, buffer address, ... - * UART Handle is assumed as Locked. - * @param huart UART handle. - * @param pData Pointer to data buffer (u8 or u16 data elements). - * @param Size Amount of data elements (u8 or u16) to be received. - * @retval HAL status - */ -HAL_StatusTypeDef UART_Start_Receive_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size) -{ - huart->pRxBuffPtr = pData; - huart->RxXferSize = Size; - - huart->ErrorCode = HAL_UART_ERROR_NONE; - huart->RxState = HAL_UART_STATE_BUSY_RX; - - if (huart->hdmarx != NULL) - { - /* Set the UART DMA transfer complete callback */ - huart->hdmarx->XferCpltCallback = UART_DMAReceiveCplt; - - /* Set the UART DMA Half transfer complete callback */ - huart->hdmarx->XferHalfCpltCallback = UART_DMARxHalfCplt; - - /* Set the DMA error callback */ - huart->hdmarx->XferErrorCallback = UART_DMAError; - - /* Set the DMA abort callback */ - huart->hdmarx->XferAbortCallback = NULL; - - /* Enable the DMA channel */ - if (HAL_DMA_Start_IT(huart->hdmarx, (uint32_t)&huart->Instance->RDR, (uint32_t)huart->pRxBuffPtr, Size) != HAL_OK) - { - /* Set error code to DMA */ - huart->ErrorCode = HAL_UART_ERROR_DMA; - - __HAL_UNLOCK(huart); - - /* Restore huart->RxState to ready */ - huart->RxState = HAL_UART_STATE_READY; - - return HAL_ERROR; - } - } - __HAL_UNLOCK(huart); - - /* Enable the UART Parity Error Interrupt */ - if (huart->Init.Parity != UART_PARITY_NONE) - { - ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_PEIE); - } - - /* Enable the UART Error Interrupt: (Frame error, noise error, overrun error) */ - ATOMIC_SET_BIT(huart->Instance->CR3, USART_CR3_EIE); - - /* Enable the DMA transfer for the receiver request by setting the DMAR bit - in the UART CR3 register */ - ATOMIC_SET_BIT(huart->Instance->CR3, USART_CR3_DMAR); - - return HAL_OK; -} - - -/** - * @brief End ongoing Tx transfer on UART peripheral (following error detection or Transmit completion). - * @param huart UART handle. - * @retval None - */ -static void UART_EndTxTransfer(UART_HandleTypeDef *huart) -{ -#if defined(USART_CR1_FIFOEN) - /* Disable TXEIE, TCIE, TXFT interrupts */ - ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_TXEIE_TXFNFIE | USART_CR1_TCIE)); - ATOMIC_CLEAR_BIT(huart->Instance->CR3, (USART_CR3_TXFTIE)); -#else - /* Disable TXEIE and TCIE interrupts */ - ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_TXEIE | USART_CR1_TCIE)); -#endif /* USART_CR1_FIFOEN */ - - /* At end of Tx process, restore huart->gState to Ready */ - huart->gState = HAL_UART_STATE_READY; -} - - -/** - * @brief End ongoing Rx transfer on UART peripheral (following error detection or Reception completion). - * @param huart UART handle. - * @retval None - */ -static void UART_EndRxTransfer(UART_HandleTypeDef *huart) -{ - /* Disable RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts */ -#if defined(USART_CR1_FIFOEN) - ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE)); - ATOMIC_CLEAR_BIT(huart->Instance->CR3, (USART_CR3_EIE | USART_CR3_RXFTIE)); -#else - ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE | USART_CR1_PEIE)); - ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE); -#endif /* USART_CR1_FIFOEN */ - - /* In case of reception waiting for IDLE event, disable also the IDLE IE interrupt source */ - if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) - { - ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_IDLEIE); - } - - /* At end of Rx process, restore huart->RxState to Ready */ - huart->RxState = HAL_UART_STATE_READY; - huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; - - /* Reset RxIsr function pointer */ - huart->RxISR = NULL; -} - - -/** - * @brief DMA UART transmit process complete callback. - * @param hdma DMA handle. - * @retval None - */ -static void UART_DMATransmitCplt(DMA_HandleTypeDef *hdma) -{ - UART_HandleTypeDef *huart = (UART_HandleTypeDef *)(hdma->Parent); - - /* DMA Normal mode */ - if (HAL_IS_BIT_CLR(hdma->Instance->CCR, DMA_CCR_CIRC)) - { - huart->TxXferCount = 0U; - - /* Disable the DMA transfer for transmit request by resetting the DMAT bit - in the UART CR3 register */ - ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAT); - - /* Enable the UART Transmit Complete Interrupt */ - ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_TCIE); - } - /* DMA Circular mode */ - else - { -#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) - /*Call registered Tx complete callback*/ - huart->TxCpltCallback(huart); -#else - /*Call legacy weak Tx complete callback*/ - HAL_UART_TxCpltCallback(huart); -#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ - } -} - -/** - * @brief DMA UART transmit process half complete callback. - * @param hdma DMA handle. - * @retval None - */ -static void UART_DMATxHalfCplt(DMA_HandleTypeDef *hdma) -{ - UART_HandleTypeDef *huart = (UART_HandleTypeDef *)(hdma->Parent); - -#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) - /*Call registered Tx Half complete callback*/ - huart->TxHalfCpltCallback(huart); -#else - /*Call legacy weak Tx Half complete callback*/ - HAL_UART_TxHalfCpltCallback(huart); -#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ -} - -/** - * @brief DMA UART receive process complete callback. - * @param hdma DMA handle. - * @retval None - */ -static void UART_DMAReceiveCplt(DMA_HandleTypeDef *hdma) -{ - UART_HandleTypeDef *huart = (UART_HandleTypeDef *)(hdma->Parent); - - /* DMA Normal mode */ - if (HAL_IS_BIT_CLR(hdma->Instance->CCR, DMA_CCR_CIRC)) - { - huart->RxXferCount = 0U; - - /* Disable PE and ERR (Frame error, noise error, overrun error) interrupts */ - ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_PEIE); - ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE); - - /* Disable the DMA transfer for the receiver request by resetting the DMAR bit - in the UART CR3 register */ - ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR); - - /* At end of Rx process, restore huart->RxState to Ready */ - huart->RxState = HAL_UART_STATE_READY; - - /* If Reception till IDLE event has been selected, Disable IDLE Interrupt */ - if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) - { - ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_IDLEIE); - } - } - - /* Check current reception Mode : - If Reception till IDLE event has been selected : use Rx Event callback */ - if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) - { -#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) - /*Call registered Rx Event callback*/ - huart->RxEventCallback(huart, huart->RxXferSize); -#else - /*Call legacy weak Rx Event callback*/ - HAL_UARTEx_RxEventCallback(huart, huart->RxXferSize); -#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ - } - else - { - /* In other cases : use Rx Complete callback */ -#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) - /*Call registered Rx complete callback*/ - huart->RxCpltCallback(huart); -#else - /*Call legacy weak Rx complete callback*/ - HAL_UART_RxCpltCallback(huart); -#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ - } -} - -/** - * @brief DMA UART receive process half complete callback. - * @param hdma DMA handle. - * @retval None - */ -static void UART_DMARxHalfCplt(DMA_HandleTypeDef *hdma) -{ - UART_HandleTypeDef *huart = (UART_HandleTypeDef *)(hdma->Parent); - - /* Check current reception Mode : - If Reception till IDLE event has been selected : use Rx Event callback */ - if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) - { -#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) - /*Call registered Rx Event callback*/ - huart->RxEventCallback(huart, huart->RxXferSize / 2U); -#else - /*Call legacy weak Rx Event callback*/ - HAL_UARTEx_RxEventCallback(huart, huart->RxXferSize / 2U); -#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ - } - else - { - /* In other cases : use Rx Half Complete callback */ -#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) - /*Call registered Rx Half complete callback*/ - huart->RxHalfCpltCallback(huart); -#else - /*Call legacy weak Rx Half complete callback*/ - HAL_UART_RxHalfCpltCallback(huart); -#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ - } -} - -/** - * @brief DMA UART communication error callback. - * @param hdma DMA handle. - * @retval None - */ -static void UART_DMAError(DMA_HandleTypeDef *hdma) -{ - UART_HandleTypeDef *huart = (UART_HandleTypeDef *)(hdma->Parent); - - const HAL_UART_StateTypeDef gstate = huart->gState; - const HAL_UART_StateTypeDef rxstate = huart->RxState; - - /* Stop UART DMA Tx request if ongoing */ - if ((HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAT)) && - (gstate == HAL_UART_STATE_BUSY_TX)) - { - huart->TxXferCount = 0U; - UART_EndTxTransfer(huart); - } - - /* Stop UART DMA Rx request if ongoing */ - if ((HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR)) && - (rxstate == HAL_UART_STATE_BUSY_RX)) - { - huart->RxXferCount = 0U; - UART_EndRxTransfer(huart); - } - - huart->ErrorCode |= HAL_UART_ERROR_DMA; - -#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) - /*Call registered error callback*/ - huart->ErrorCallback(huart); -#else - /*Call legacy weak error callback*/ - HAL_UART_ErrorCallback(huart); -#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ -} - -/** - * @brief DMA UART communication abort callback, when initiated by HAL services on Error - * (To be called at end of DMA Abort procedure following error occurrence). - * @param hdma DMA handle. - * @retval None - */ -static void UART_DMAAbortOnError(DMA_HandleTypeDef *hdma) -{ - UART_HandleTypeDef *huart = (UART_HandleTypeDef *)(hdma->Parent); - huart->RxXferCount = 0U; - huart->TxXferCount = 0U; - -#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) - /*Call registered error callback*/ - huart->ErrorCallback(huart); -#else - /*Call legacy weak error callback*/ - HAL_UART_ErrorCallback(huart); -#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ -} - -/** - * @brief DMA UART Tx communication abort callback, when initiated by user - * (To be called at end of DMA Tx Abort procedure following user abort request). - * @note When this callback is executed, User Abort complete call back is called only if no - * Abort still ongoing for Rx DMA Handle. - * @param hdma DMA handle. - * @retval None - */ -static void UART_DMATxAbortCallback(DMA_HandleTypeDef *hdma) -{ - UART_HandleTypeDef *huart = (UART_HandleTypeDef *)(hdma->Parent); - - huart->hdmatx->XferAbortCallback = NULL; - - /* Check if an Abort process is still ongoing */ - if (huart->hdmarx != NULL) - { - if (huart->hdmarx->XferAbortCallback != NULL) - { - return; - } - } - - /* No Abort process still ongoing : All DMA channels are aborted, call user Abort Complete callback */ - huart->TxXferCount = 0U; - huart->RxXferCount = 0U; - - /* Reset errorCode */ - huart->ErrorCode = HAL_UART_ERROR_NONE; - - /* Clear the Error flags in the ICR register */ - __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_OREF | UART_CLEAR_NEF | UART_CLEAR_PEF | UART_CLEAR_FEF); - -#if defined(USART_CR1_FIFOEN) - /* Flush the whole TX FIFO (if needed) */ - if (huart->FifoMode == UART_FIFOMODE_ENABLE) - { - __HAL_UART_SEND_REQ(huart, UART_TXDATA_FLUSH_REQUEST); - } -#endif /* USART_CR1_FIFOEN */ - - /* Restore huart->gState and huart->RxState to Ready */ - huart->gState = HAL_UART_STATE_READY; - huart->RxState = HAL_UART_STATE_READY; - huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; - - /* Call user Abort complete callback */ -#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) - /* Call registered Abort complete callback */ - huart->AbortCpltCallback(huart); -#else - /* Call legacy weak Abort complete callback */ - HAL_UART_AbortCpltCallback(huart); -#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ -} - - -/** - * @brief DMA UART Rx communication abort callback, when initiated by user - * (To be called at end of DMA Rx Abort procedure following user abort request). - * @note When this callback is executed, User Abort complete call back is called only if no - * Abort still ongoing for Tx DMA Handle. - * @param hdma DMA handle. - * @retval None - */ -static void UART_DMARxAbortCallback(DMA_HandleTypeDef *hdma) -{ - UART_HandleTypeDef *huart = (UART_HandleTypeDef *)(hdma->Parent); - - huart->hdmarx->XferAbortCallback = NULL; - - /* Check if an Abort process is still ongoing */ - if (huart->hdmatx != NULL) - { - if (huart->hdmatx->XferAbortCallback != NULL) - { - return; - } - } - - /* No Abort process still ongoing : All DMA channels are aborted, call user Abort Complete callback */ - huart->TxXferCount = 0U; - huart->RxXferCount = 0U; - - /* Reset errorCode */ - huart->ErrorCode = HAL_UART_ERROR_NONE; - - /* Clear the Error flags in the ICR register */ - __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_OREF | UART_CLEAR_NEF | UART_CLEAR_PEF | UART_CLEAR_FEF); - - /* Discard the received data */ - __HAL_UART_SEND_REQ(huart, UART_RXDATA_FLUSH_REQUEST); - - /* Restore huart->gState and huart->RxState to Ready */ - huart->gState = HAL_UART_STATE_READY; - huart->RxState = HAL_UART_STATE_READY; - huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; - - /* Call user Abort complete callback */ -#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) - /* Call registered Abort complete callback */ - huart->AbortCpltCallback(huart); -#else - /* Call legacy weak Abort complete callback */ - HAL_UART_AbortCpltCallback(huart); -#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ -} - - -/** - * @brief DMA UART Tx communication abort callback, when initiated by user by a call to - * HAL_UART_AbortTransmit_IT API (Abort only Tx transfer) - * (This callback is executed at end of DMA Tx Abort procedure following user abort request, - * and leads to user Tx Abort Complete callback execution). - * @param hdma DMA handle. - * @retval None - */ -static void UART_DMATxOnlyAbortCallback(DMA_HandleTypeDef *hdma) -{ - UART_HandleTypeDef *huart = (UART_HandleTypeDef *)(hdma->Parent); - - huart->TxXferCount = 0U; - -#if defined(USART_CR1_FIFOEN) - /* Flush the whole TX FIFO (if needed) */ - if (huart->FifoMode == UART_FIFOMODE_ENABLE) - { - __HAL_UART_SEND_REQ(huart, UART_TXDATA_FLUSH_REQUEST); - } -#endif /* USART_CR1_FIFOEN */ - - /* Restore huart->gState to Ready */ - huart->gState = HAL_UART_STATE_READY; - - /* Call user Abort complete callback */ -#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) - /* Call registered Abort Transmit Complete Callback */ - huart->AbortTransmitCpltCallback(huart); -#else - /* Call legacy weak Abort Transmit Complete Callback */ - HAL_UART_AbortTransmitCpltCallback(huart); -#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ -} - -/** - * @brief DMA UART Rx communication abort callback, when initiated by user by a call to - * HAL_UART_AbortReceive_IT API (Abort only Rx transfer) - * (This callback is executed at end of DMA Rx Abort procedure following user abort request, - * and leads to user Rx Abort Complete callback execution). - * @param hdma DMA handle. - * @retval None - */ -static void UART_DMARxOnlyAbortCallback(DMA_HandleTypeDef *hdma) -{ - UART_HandleTypeDef *huart = (UART_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; - - huart->RxXferCount = 0U; - - /* Clear the Error flags in the ICR register */ - __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_OREF | UART_CLEAR_NEF | UART_CLEAR_PEF | UART_CLEAR_FEF); - - /* Discard the received data */ - __HAL_UART_SEND_REQ(huart, UART_RXDATA_FLUSH_REQUEST); - - /* Restore huart->RxState to Ready */ - huart->RxState = HAL_UART_STATE_READY; - huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; - - /* Call user Abort complete callback */ -#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) - /* Call registered Abort Receive Complete Callback */ - huart->AbortReceiveCpltCallback(huart); -#else - /* Call legacy weak Abort Receive Complete Callback */ - HAL_UART_AbortReceiveCpltCallback(huart); -#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ -} - -/** - * @brief TX interrupt handler for 7 or 8 bits data word length . - * @note Function is called under interruption only, once - * interruptions have been enabled by HAL_UART_Transmit_IT(). - * @param huart UART handle. - * @retval None - */ -static void UART_TxISR_8BIT(UART_HandleTypeDef *huart) -{ - /* Check that a Tx process is ongoing */ - if (huart->gState == HAL_UART_STATE_BUSY_TX) - { - if (huart->TxXferCount == 0U) - { - /* Disable the UART Transmit Data Register Empty Interrupt */ -#if defined(USART_CR1_FIFOEN) - ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_TXEIE_TXFNFIE); -#else - ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_TXEIE); -#endif /* USART_CR1_FIFOEN */ - - /* Enable the UART Transmit Complete Interrupt */ - ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_TCIE); - } - else - { - huart->Instance->TDR = (uint8_t)(*huart->pTxBuffPtr & (uint8_t)0xFF); - huart->pTxBuffPtr++; - huart->TxXferCount--; - } - } -} - -/** - * @brief TX interrupt handler for 9 bits data word length. - * @note Function is called under interruption only, once - * interruptions have been enabled by HAL_UART_Transmit_IT(). - * @param huart UART handle. - * @retval None - */ -static void UART_TxISR_16BIT(UART_HandleTypeDef *huart) -{ - const uint16_t *tmp; - - /* Check that a Tx process is ongoing */ - if (huart->gState == HAL_UART_STATE_BUSY_TX) - { - if (huart->TxXferCount == 0U) - { - /* Disable the UART Transmit Data Register Empty Interrupt */ -#if defined(USART_CR1_FIFOEN) - ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_TXEIE_TXFNFIE); -#else - ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_TXEIE); -#endif /* USART_CR1_FIFOEN */ - - /* Enable the UART Transmit Complete Interrupt */ - ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_TCIE); - } - else - { - tmp = (const uint16_t *) huart->pTxBuffPtr; - huart->Instance->TDR = (((uint32_t)(*tmp)) & 0x01FFUL); - huart->pTxBuffPtr += 2U; - huart->TxXferCount--; - } - } -} - -#if defined(USART_CR1_FIFOEN) -/** - * @brief TX interrupt handler for 7 or 8 bits data word length and FIFO mode is enabled. - * @note Function is called under interruption only, once - * interruptions have been enabled by HAL_UART_Transmit_IT(). - * @param huart UART handle. - * @retval None - */ -static void UART_TxISR_8BIT_FIFOEN(UART_HandleTypeDef *huart) -{ - uint16_t nb_tx_data; - - /* Check that a Tx process is ongoing */ - if (huart->gState == HAL_UART_STATE_BUSY_TX) - { - for (nb_tx_data = huart->NbTxDataToProcess ; nb_tx_data > 0U ; nb_tx_data--) - { - if (huart->TxXferCount == 0U) - { - /* Disable the TX FIFO threshold interrupt */ - ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_TXFTIE); - - /* Enable the UART Transmit Complete Interrupt */ - ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_TCIE); - - break; /* force exit loop */ - } - else if (READ_BIT(huart->Instance->ISR, USART_ISR_TXE_TXFNF) != 0U) - { - huart->Instance->TDR = (uint8_t)(*huart->pTxBuffPtr & (uint8_t)0xFF); - huart->pTxBuffPtr++; - huart->TxXferCount--; - } - else - { - /* Nothing to do */ - } - } - } -} - -/** - * @brief TX interrupt handler for 9 bits data word length and FIFO mode is enabled. - * @note Function is called under interruption only, once - * interruptions have been enabled by HAL_UART_Transmit_IT(). - * @param huart UART handle. - * @retval None - */ -static void UART_TxISR_16BIT_FIFOEN(UART_HandleTypeDef *huart) -{ - const uint16_t *tmp; - uint16_t nb_tx_data; - - /* Check that a Tx process is ongoing */ - if (huart->gState == HAL_UART_STATE_BUSY_TX) - { - for (nb_tx_data = huart->NbTxDataToProcess ; nb_tx_data > 0U ; nb_tx_data--) - { - if (huart->TxXferCount == 0U) - { - /* Disable the TX FIFO threshold interrupt */ - ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_TXFTIE); - - /* Enable the UART Transmit Complete Interrupt */ - ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_TCIE); - - break; /* force exit loop */ - } - else if (READ_BIT(huart->Instance->ISR, USART_ISR_TXE_TXFNF) != 0U) - { - tmp = (const uint16_t *) huart->pTxBuffPtr; - huart->Instance->TDR = (((uint32_t)(*tmp)) & 0x01FFUL); - huart->pTxBuffPtr += 2U; - huart->TxXferCount--; - } - else - { - /* Nothing to do */ - } - } - } -} -#endif /* USART_CR1_FIFOEN */ - -/** - * @brief Wrap up transmission in non-blocking mode. - * @param huart pointer to a UART_HandleTypeDef structure that contains - * the configuration information for the specified UART module. - * @retval None - */ -static void UART_EndTransmit_IT(UART_HandleTypeDef *huart) -{ - /* Disable the UART Transmit Complete Interrupt */ - ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_TCIE); - - /* Tx process is ended, restore huart->gState to Ready */ - huart->gState = HAL_UART_STATE_READY; - - /* Cleat TxISR function pointer */ - huart->TxISR = NULL; - -#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) - /*Call registered Tx complete callback*/ - huart->TxCpltCallback(huart); -#else - /*Call legacy weak Tx complete callback*/ - HAL_UART_TxCpltCallback(huart); -#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ -} - -/** - * @brief RX interrupt handler for 7 or 8 bits data word length . - * @param huart UART handle. - * @retval None - */ -static void UART_RxISR_8BIT(UART_HandleTypeDef *huart) -{ - uint16_t uhMask = huart->Mask; - uint16_t uhdata; - - /* Check that a Rx process is ongoing */ - if (huart->RxState == HAL_UART_STATE_BUSY_RX) - { - uhdata = (uint16_t) READ_REG(huart->Instance->RDR); - *huart->pRxBuffPtr = (uint8_t)(uhdata & (uint8_t)uhMask); - huart->pRxBuffPtr++; - huart->RxXferCount--; - - if (huart->RxXferCount == 0U) - { - /* Disable the UART Parity Error Interrupt and RXNE interrupts */ -#if defined(USART_CR1_FIFOEN) - ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE)); -#else - ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE | USART_CR1_PEIE)); -#endif /* USART_CR1_FIFOEN */ - - /* Disable the UART Error Interrupt: (Frame error, noise error, overrun error) */ - ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE); - - /* Rx process is completed, restore huart->RxState to Ready */ - huart->RxState = HAL_UART_STATE_READY; - - /* Clear RxISR function pointer */ - huart->RxISR = NULL; - - /* Check current reception Mode : - If Reception till IDLE event has been selected : */ - if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) - { - /* Set reception type to Standard */ - huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; - - /* Disable IDLE interrupt */ - ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_IDLEIE); - - if (__HAL_UART_GET_FLAG(huart, UART_FLAG_IDLE) == SET) - { - /* Clear IDLE Flag */ - __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_IDLEF); - } -#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) - /*Call registered Rx Event callback*/ - huart->RxEventCallback(huart, huart->RxXferSize); -#else - /*Call legacy weak Rx Event callback*/ - HAL_UARTEx_RxEventCallback(huart, huart->RxXferSize); -#endif /* (USE_HAL_UART_REGISTER_CALLBACKS) */ - } - else - { - /* Standard reception API called */ -#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) - /*Call registered Rx complete callback*/ - huart->RxCpltCallback(huart); -#else - /*Call legacy weak Rx complete callback*/ - HAL_UART_RxCpltCallback(huart); -#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ - } - } - } - else - { - /* Clear RXNE interrupt flag */ - __HAL_UART_SEND_REQ(huart, UART_RXDATA_FLUSH_REQUEST); - } -} - -/** - * @brief RX interrupt handler for 9 bits data word length . - * @note Function is called under interruption only, once - * interruptions have been enabled by HAL_UART_Receive_IT() - * @param huart UART handle. - * @retval None - */ -static void UART_RxISR_16BIT(UART_HandleTypeDef *huart) -{ - uint16_t *tmp; - uint16_t uhMask = huart->Mask; - uint16_t uhdata; - - /* Check that a Rx process is ongoing */ - if (huart->RxState == HAL_UART_STATE_BUSY_RX) - { - uhdata = (uint16_t) READ_REG(huart->Instance->RDR); - tmp = (uint16_t *) huart->pRxBuffPtr ; - *tmp = (uint16_t)(uhdata & uhMask); - huart->pRxBuffPtr += 2U; - huart->RxXferCount--; - - if (huart->RxXferCount == 0U) - { - /* Disable the UART Parity Error Interrupt and RXNE interrupt*/ -#if defined(USART_CR1_FIFOEN) - ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE)); -#else - ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE | USART_CR1_PEIE)); -#endif /* USART_CR1_FIFOEN */ - - /* Disable the UART Error Interrupt: (Frame error, noise error, overrun error) */ - ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE); - - /* Rx process is completed, restore huart->RxState to Ready */ - huart->RxState = HAL_UART_STATE_READY; - - /* Clear RxISR function pointer */ - huart->RxISR = NULL; - - /* Check current reception Mode : - If Reception till IDLE event has been selected : */ - if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) - { - /* Set reception type to Standard */ - huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; - - /* Disable IDLE interrupt */ - ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_IDLEIE); - - if (__HAL_UART_GET_FLAG(huart, UART_FLAG_IDLE) == SET) - { - /* Clear IDLE Flag */ - __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_IDLEF); - } -#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) - /*Call registered Rx Event callback*/ - huart->RxEventCallback(huart, huart->RxXferSize); -#else - /*Call legacy weak Rx Event callback*/ - HAL_UARTEx_RxEventCallback(huart, huart->RxXferSize); -#endif /* (USE_HAL_UART_REGISTER_CALLBACKS) */ - } - else - { - /* Standard reception API called */ -#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) - /*Call registered Rx complete callback*/ - huart->RxCpltCallback(huart); -#else - /*Call legacy weak Rx complete callback*/ - HAL_UART_RxCpltCallback(huart); -#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ - } - } - } - else - { - /* Clear RXNE interrupt flag */ - __HAL_UART_SEND_REQ(huart, UART_RXDATA_FLUSH_REQUEST); - } -} - -#if defined(USART_CR1_FIFOEN) -/** - * @brief RX interrupt handler for 7 or 8 bits data word length and FIFO mode is enabled. - * @note Function is called under interruption only, once - * interruptions have been enabled by HAL_UART_Receive_IT() - * @param huart UART handle. - * @retval None - */ -static void UART_RxISR_8BIT_FIFOEN(UART_HandleTypeDef *huart) -{ - uint16_t uhMask = huart->Mask; - uint16_t uhdata; - uint16_t nb_rx_data; - uint16_t rxdatacount; - uint32_t isrflags = READ_REG(huart->Instance->ISR); - uint32_t cr1its = READ_REG(huart->Instance->CR1); - uint32_t cr3its = READ_REG(huart->Instance->CR3); - - /* Check that a Rx process is ongoing */ - if (huart->RxState == HAL_UART_STATE_BUSY_RX) - { - nb_rx_data = huart->NbRxDataToProcess; - while ((nb_rx_data > 0U) && ((isrflags & USART_ISR_RXNE_RXFNE) != 0U)) - { - uhdata = (uint16_t) READ_REG(huart->Instance->RDR); - *huart->pRxBuffPtr = (uint8_t)(uhdata & (uint8_t)uhMask); - huart->pRxBuffPtr++; - huart->RxXferCount--; - isrflags = READ_REG(huart->Instance->ISR); - - /* If some non blocking errors occurred */ - if ((isrflags & (USART_ISR_PE | USART_ISR_FE | USART_ISR_NE)) != 0U) - { - /* UART parity error interrupt occurred -------------------------------------*/ - if (((isrflags & USART_ISR_PE) != 0U) && ((cr1its & USART_CR1_PEIE) != 0U)) - { - __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_PEF); - - huart->ErrorCode |= HAL_UART_ERROR_PE; - } - - /* UART frame error interrupt occurred --------------------------------------*/ - if (((isrflags & USART_ISR_FE) != 0U) && ((cr3its & USART_CR3_EIE) != 0U)) - { - __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_FEF); - - huart->ErrorCode |= HAL_UART_ERROR_FE; - } - - /* UART noise error interrupt occurred --------------------------------------*/ - if (((isrflags & USART_ISR_NE) != 0U) && ((cr3its & USART_CR3_EIE) != 0U)) - { - __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_NEF); - - huart->ErrorCode |= HAL_UART_ERROR_NE; - } - - /* Call UART Error Call back function if need be ----------------------------*/ - if (huart->ErrorCode != HAL_UART_ERROR_NONE) - { - /* Non Blocking error : transfer could go on. - Error is notified to user through user error callback */ -#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) - /*Call registered error callback*/ - huart->ErrorCallback(huart); -#else - /*Call legacy weak error callback*/ - HAL_UART_ErrorCallback(huart); -#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ - huart->ErrorCode = HAL_UART_ERROR_NONE; - } - } - - if (huart->RxXferCount == 0U) - { - /* Disable the UART Parity Error Interrupt and RXFT interrupt*/ - ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_PEIE); - - /* Disable the UART Error Interrupt: (Frame error, noise error, overrun error) - and RX FIFO Threshold interrupt */ - ATOMIC_CLEAR_BIT(huart->Instance->CR3, (USART_CR3_EIE | USART_CR3_RXFTIE)); - - /* Rx process is completed, restore huart->RxState to Ready */ - huart->RxState = HAL_UART_STATE_READY; - - /* Clear RxISR function pointer */ - huart->RxISR = NULL; - - /* Check current reception Mode : - If Reception till IDLE event has been selected : */ - if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) - { - /* Set reception type to Standard */ - huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; - - /* Disable IDLE interrupt */ - ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_IDLEIE); - - if (__HAL_UART_GET_FLAG(huart, UART_FLAG_IDLE) == SET) - { - /* Clear IDLE Flag */ - __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_IDLEF); - } -#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) - /*Call registered Rx Event callback*/ - huart->RxEventCallback(huart, huart->RxXferSize); -#else - /*Call legacy weak Rx Event callback*/ - HAL_UARTEx_RxEventCallback(huart, huart->RxXferSize); -#endif /* (USE_HAL_UART_REGISTER_CALLBACKS) */ - } - else - { - /* Standard reception API called */ -#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) - /*Call registered Rx complete callback*/ - huart->RxCpltCallback(huart); -#else - /*Call legacy weak Rx complete callback*/ - HAL_UART_RxCpltCallback(huart); -#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ - } - } - } - - /* When remaining number of bytes to receive is less than the RX FIFO - threshold, next incoming frames are processed as if FIFO mode was - disabled (i.e. one interrupt per received frame). - */ - rxdatacount = huart->RxXferCount; - if ((rxdatacount != 0U) && (rxdatacount < huart->NbRxDataToProcess)) - { - /* Disable the UART RXFT interrupt*/ - ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_RXFTIE); - - /* Update the RxISR function pointer */ - huart->RxISR = UART_RxISR_8BIT; - - /* Enable the UART Data Register Not Empty interrupt */ - ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_RXNEIE_RXFNEIE); - } - } - else - { - /* Clear RXNE interrupt flag */ - __HAL_UART_SEND_REQ(huart, UART_RXDATA_FLUSH_REQUEST); - } -} - -/** - * @brief RX interrupt handler for 9 bits data word length and FIFO mode is enabled. - * @note Function is called under interruption only, once - * interruptions have been enabled by HAL_UART_Receive_IT() - * @param huart UART handle. - * @retval None - */ -static void UART_RxISR_16BIT_FIFOEN(UART_HandleTypeDef *huart) -{ - uint16_t *tmp; - uint16_t uhMask = huart->Mask; - uint16_t uhdata; - uint16_t nb_rx_data; - uint16_t rxdatacount; - uint32_t isrflags = READ_REG(huart->Instance->ISR); - uint32_t cr1its = READ_REG(huart->Instance->CR1); - uint32_t cr3its = READ_REG(huart->Instance->CR3); - - /* Check that a Rx process is ongoing */ - if (huart->RxState == HAL_UART_STATE_BUSY_RX) - { - nb_rx_data = huart->NbRxDataToProcess; - while ((nb_rx_data > 0U) && ((isrflags & USART_ISR_RXNE_RXFNE) != 0U)) - { - uhdata = (uint16_t) READ_REG(huart->Instance->RDR); - tmp = (uint16_t *) huart->pRxBuffPtr ; - *tmp = (uint16_t)(uhdata & uhMask); - huart->pRxBuffPtr += 2U; - huart->RxXferCount--; - isrflags = READ_REG(huart->Instance->ISR); - - /* If some non blocking errors occurred */ - if ((isrflags & (USART_ISR_PE | USART_ISR_FE | USART_ISR_NE)) != 0U) - { - /* UART parity error interrupt occurred -------------------------------------*/ - if (((isrflags & USART_ISR_PE) != 0U) && ((cr1its & USART_CR1_PEIE) != 0U)) - { - __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_PEF); - - huart->ErrorCode |= HAL_UART_ERROR_PE; - } - - /* UART frame error interrupt occurred --------------------------------------*/ - if (((isrflags & USART_ISR_FE) != 0U) && ((cr3its & USART_CR3_EIE) != 0U)) - { - __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_FEF); - - huart->ErrorCode |= HAL_UART_ERROR_FE; - } - - /* UART noise error interrupt occurred --------------------------------------*/ - if (((isrflags & USART_ISR_NE) != 0U) && ((cr3its & USART_CR3_EIE) != 0U)) - { - __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_NEF); - - huart->ErrorCode |= HAL_UART_ERROR_NE; - } - - /* Call UART Error Call back function if need be ----------------------------*/ - if (huart->ErrorCode != HAL_UART_ERROR_NONE) - { - /* Non Blocking error : transfer could go on. - Error is notified to user through user error callback */ -#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) - /*Call registered error callback*/ - huart->ErrorCallback(huart); -#else - /*Call legacy weak error callback*/ - HAL_UART_ErrorCallback(huart); -#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ - huart->ErrorCode = HAL_UART_ERROR_NONE; - } - } - - if (huart->RxXferCount == 0U) - { - /* Disable the UART Parity Error Interrupt and RXFT interrupt*/ - ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_PEIE); - - /* Disable the UART Error Interrupt: (Frame error, noise error, overrun error) - and RX FIFO Threshold interrupt */ - ATOMIC_CLEAR_BIT(huart->Instance->CR3, (USART_CR3_EIE | USART_CR3_RXFTIE)); - - /* Rx process is completed, restore huart->RxState to Ready */ - huart->RxState = HAL_UART_STATE_READY; - - /* Clear RxISR function pointer */ - huart->RxISR = NULL; - - /* Check current reception Mode : - If Reception till IDLE event has been selected : */ - if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) - { - /* Set reception type to Standard */ - huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; - - /* Disable IDLE interrupt */ - ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_IDLEIE); - - if (__HAL_UART_GET_FLAG(huart, UART_FLAG_IDLE) == SET) - { - /* Clear IDLE Flag */ - __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_IDLEF); - } -#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) - /*Call registered Rx Event callback*/ - huart->RxEventCallback(huart, huart->RxXferSize); -#else - /*Call legacy weak Rx Event callback*/ - HAL_UARTEx_RxEventCallback(huart, huart->RxXferSize); -#endif /* (USE_HAL_UART_REGISTER_CALLBACKS) */ - } - else - { - /* Standard reception API called */ -#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) - /*Call registered Rx complete callback*/ - huart->RxCpltCallback(huart); -#else - /*Call legacy weak Rx complete callback*/ - HAL_UART_RxCpltCallback(huart); -#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ - } - } - } - - /* When remaining number of bytes to receive is less than the RX FIFO - threshold, next incoming frames are processed as if FIFO mode was - disabled (i.e. one interrupt per received frame). - */ - rxdatacount = huart->RxXferCount; - if ((rxdatacount != 0U) && (rxdatacount < huart->NbRxDataToProcess)) - { - /* Disable the UART RXFT interrupt*/ - ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_RXFTIE); - - /* Update the RxISR function pointer */ - huart->RxISR = UART_RxISR_16BIT; - - /* Enable the UART Data Register Not Empty interrupt */ - ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_RXNEIE_RXFNEIE); - } - } - else - { - /* Clear RXNE interrupt flag */ - __HAL_UART_SEND_REQ(huart, UART_RXDATA_FLUSH_REQUEST); - } -} -#endif /* USART_CR1_FIFOEN */ - -/** - * @} - */ - -#endif /* HAL_UART_MODULE_ENABLED */ -/** - * @} - */ - -/** - * @} - */ - +/** + ****************************************************************************** + * @file stm32l4xx_hal_uart.c + * @author MCD Application Team + * @brief UART HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Universal Asynchronous Receiver Transmitter Peripheral (UART). + * + Initialization and de-initialization functions + * + IO operation functions + * + Peripheral Control functions + * + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + =============================================================================== + ##### How to use this driver ##### + =============================================================================== + [..] + The UART HAL driver can be used as follows: + + (#) Declare a UART_HandleTypeDef handle structure (eg. UART_HandleTypeDef huart). + (#) Initialize the UART low level resources by implementing the HAL_UART_MspInit() API: + (++) Enable the USARTx interface clock. + (++) UART pins configuration: + (+++) Enable the clock for the UART GPIOs. + (+++) Configure these UART pins as alternate function pull-up. + (++) NVIC configuration if you need to use interrupt process (HAL_UART_Transmit_IT() + and HAL_UART_Receive_IT() APIs): + (+++) Configure the USARTx interrupt priority. + (+++) Enable the NVIC USART IRQ handle. + (++) UART interrupts handling: + -@@- The specific UART interrupts (Transmission complete interrupt, + RXNE interrupt, RX/TX FIFOs related interrupts and Error Interrupts) + are managed using the macros __HAL_UART_ENABLE_IT() and __HAL_UART_DISABLE_IT() + inside the transmit and receive processes. + (++) DMA Configuration if you need to use DMA process (HAL_UART_Transmit_DMA() + and HAL_UART_Receive_DMA() APIs): + (+++) Declare a DMA handle structure for the Tx/Rx channel. + (+++) Enable the DMAx interface clock. + (+++) Configure the declared DMA handle structure with the required Tx/Rx parameters. + (+++) Configure the DMA Tx/Rx channel. + (+++) Associate the initialized DMA handle to the UART DMA Tx/Rx handle. + (+++) Configure the priority and enable the NVIC for the transfer complete + interrupt on the DMA Tx/Rx channel. + + (#) Program the Baud Rate, Word Length, Stop Bit, Parity, Prescaler value , Hardware + flow control and Mode (Receiver/Transmitter) in the huart handle Init structure. + + (#) If required, program UART advanced features (TX/RX pins swap, auto Baud rate detection,...) + in the huart handle AdvancedInit structure. + + (#) For the UART asynchronous mode, initialize the UART registers by calling + the HAL_UART_Init() API. + + (#) For the UART Half duplex mode, initialize the UART registers by calling + the HAL_HalfDuplex_Init() API. + + (#) For the UART LIN (Local Interconnection Network) mode, initialize the UART registers + by calling the HAL_LIN_Init() API. + + (#) For the UART Multiprocessor mode, initialize the UART registers + by calling the HAL_MultiProcessor_Init() API. + + (#) For the UART RS485 Driver Enabled mode, initialize the UART registers + by calling the HAL_RS485Ex_Init() API. + + [..] + (@) These API's (HAL_UART_Init(), HAL_HalfDuplex_Init(), HAL_LIN_Init(), HAL_MultiProcessor_Init(), + also configure the low level Hardware GPIO, CLOCK, CORTEX...etc) by + calling the customized HAL_UART_MspInit() API. + + ##### Callback registration ##### + ================================== + + [..] + The compilation define USE_HAL_UART_REGISTER_CALLBACKS when set to 1 + allows the user to configure dynamically the driver callbacks. + + [..] + Use Function HAL_UART_RegisterCallback() to register a user callback. + Function HAL_UART_RegisterCallback() allows to register following callbacks: + (+) TxHalfCpltCallback : Tx Half Complete Callback. + (+) TxCpltCallback : Tx Complete Callback. + (+) RxHalfCpltCallback : Rx Half Complete Callback. + (+) RxCpltCallback : Rx Complete Callback. + (+) ErrorCallback : Error Callback. + (+) AbortCpltCallback : Abort Complete Callback. + (+) AbortTransmitCpltCallback : Abort Transmit Complete Callback. + (+) AbortReceiveCpltCallback : Abort Receive Complete Callback. + (+) WakeupCallback : Wakeup Callback. +#if defined(USART_CR1_FIFOEN) + (+) RxFifoFullCallback : Rx Fifo Full Callback. + (+) TxFifoEmptyCallback : Tx Fifo Empty Callback. +#endif + (+) MspInitCallback : UART MspInit. + (+) MspDeInitCallback : UART MspDeInit. + This function takes as parameters the HAL peripheral handle, the Callback ID + and a pointer to the user callback function. + + [..] + Use function HAL_UART_UnRegisterCallback() to reset a callback to the default + weak function. + HAL_UART_UnRegisterCallback() takes as parameters the HAL peripheral handle, + and the Callback ID. + This function allows to reset following callbacks: + (+) TxHalfCpltCallback : Tx Half Complete Callback. + (+) TxCpltCallback : Tx Complete Callback. + (+) RxHalfCpltCallback : Rx Half Complete Callback. + (+) RxCpltCallback : Rx Complete Callback. + (+) ErrorCallback : Error Callback. + (+) AbortCpltCallback : Abort Complete Callback. + (+) AbortTransmitCpltCallback : Abort Transmit Complete Callback. + (+) AbortReceiveCpltCallback : Abort Receive Complete Callback. + (+) WakeupCallback : Wakeup Callback. +#if defined(USART_CR1_FIFOEN) + (+) RxFifoFullCallback : Rx Fifo Full Callback. + (+) TxFifoEmptyCallback : Tx Fifo Empty Callback. +#endif + (+) MspInitCallback : UART MspInit. + (+) MspDeInitCallback : UART MspDeInit. + + [..] + For specific callback RxEventCallback, use dedicated registration/reset functions: + respectively HAL_UART_RegisterRxEventCallback() , HAL_UART_UnRegisterRxEventCallback(). + + [..] + By default, after the HAL_UART_Init() and when the state is HAL_UART_STATE_RESET + all callbacks are set to the corresponding weak functions: + examples HAL_UART_TxCpltCallback(), HAL_UART_RxHalfCpltCallback(). + Exception done for MspInit and MspDeInit functions that are respectively + reset to the legacy weak functions in the HAL_UART_Init() + and HAL_UART_DeInit() only when these callbacks are null (not registered beforehand). + If not, MspInit or MspDeInit are not null, the HAL_UART_Init() and HAL_UART_DeInit() + keep and use the user MspInit/MspDeInit callbacks (registered beforehand). + + [..] + Callbacks can be registered/unregistered in HAL_UART_STATE_READY state only. + Exception done MspInit/MspDeInit that can be registered/unregistered + in HAL_UART_STATE_READY or HAL_UART_STATE_RESET state, thus registered (user) + MspInit/DeInit callbacks can be used during the Init/DeInit. + In that case first register the MspInit/MspDeInit user callbacks + using HAL_UART_RegisterCallback() before calling HAL_UART_DeInit() + or HAL_UART_Init() function. + + [..] + When The compilation define USE_HAL_UART_REGISTER_CALLBACKS is set to 0 or + not defined, the callback registration feature is not available + and weak callbacks are used. + + + @endverbatim + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l4xx_hal.h" + +/** @addtogroup STM32L4xx_HAL_Driver + * @{ + */ + +/** @defgroup UART UART + * @brief HAL UART module driver + * @{ + */ + +#ifdef HAL_UART_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/** @defgroup UART_Private_Constants UART Private Constants + * @{ + */ +#if defined(USART_CR1_FIFOEN) +#define USART_CR1_FIELDS ((uint32_t)(USART_CR1_M | USART_CR1_PCE | USART_CR1_PS | USART_CR1_TE | USART_CR1_RE | \ + USART_CR1_OVER8 | USART_CR1_FIFOEN)) /*!< UART or USART CR1 fields of parameters set by UART_SetConfig API */ +#else +#define USART_CR1_FIELDS ((uint32_t)(USART_CR1_M | USART_CR1_PCE | USART_CR1_PS | USART_CR1_TE | USART_CR1_RE | \ + USART_CR1_OVER8)) /*!< UART or USART CR1 fields of parameters set by UART_SetConfig API */ +#endif /* USART_CR1_FIFOEN */ + +#if defined(USART_CR1_FIFOEN) +#define USART_CR3_FIELDS ((uint32_t)(USART_CR3_RTSE | USART_CR3_CTSE | USART_CR3_ONEBIT | USART_CR3_TXFTCFG | \ + USART_CR3_RXFTCFG)) /*!< UART or USART CR3 fields of parameters set by UART_SetConfig API */ +#else +#define USART_CR3_FIELDS ((uint32_t)(USART_CR3_RTSE | USART_CR3_CTSE |\ + USART_CR3_ONEBIT)) /*!< UART or USART CR3 fields of parameters set by UART_SetConfig API */ +#endif /* USART_CR1_FIFOEN */ + +#define LPUART_BRR_MIN 0x00000300U /* LPUART BRR minimum authorized value */ +#define LPUART_BRR_MAX 0x000FFFFFU /* LPUART BRR maximum authorized value */ + +#define UART_BRR_MIN 0x10U /* UART BRR minimum authorized value */ +#define UART_BRR_MAX 0x0000FFFFU /* UART BRR maximum authorized value */ +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/** @addtogroup UART_Private_Functions + * @{ + */ +static void UART_EndRxTransfer(UART_HandleTypeDef *huart); +static void UART_EndTxTransfer(UART_HandleTypeDef *huart); +static void UART_DMATransmitCplt(DMA_HandleTypeDef *hdma); +static void UART_DMAReceiveCplt(DMA_HandleTypeDef *hdma); +static void UART_DMARxHalfCplt(DMA_HandleTypeDef *hdma); +static void UART_DMATxHalfCplt(DMA_HandleTypeDef *hdma); +static void UART_DMAError(DMA_HandleTypeDef *hdma); +static void UART_DMAAbortOnError(DMA_HandleTypeDef *hdma); +static void UART_DMATxAbortCallback(DMA_HandleTypeDef *hdma); +static void UART_DMARxAbortCallback(DMA_HandleTypeDef *hdma); +static void UART_DMATxOnlyAbortCallback(DMA_HandleTypeDef *hdma); +static void UART_DMARxOnlyAbortCallback(DMA_HandleTypeDef *hdma); +static void UART_TxISR_8BIT(UART_HandleTypeDef *huart); +static void UART_TxISR_16BIT(UART_HandleTypeDef *huart); +#if defined(USART_CR1_FIFOEN) +static void UART_TxISR_8BIT_FIFOEN(UART_HandleTypeDef *huart); +static void UART_TxISR_16BIT_FIFOEN(UART_HandleTypeDef *huart); +#endif /* USART_CR1_FIFOEN */ +static void UART_EndTransmit_IT(UART_HandleTypeDef *huart); +static void UART_RxISR_8BIT(UART_HandleTypeDef *huart); +static void UART_RxISR_16BIT(UART_HandleTypeDef *huart); +#if defined(USART_CR1_FIFOEN) +static void UART_RxISR_8BIT_FIFOEN(UART_HandleTypeDef *huart); +static void UART_RxISR_16BIT_FIFOEN(UART_HandleTypeDef *huart); +#endif /* USART_CR1_FIFOEN */ +/** + * @} + */ + +/* Private variables ---------------------------------------------------------*/ +#if defined(USART_PRESC_PRESCALER) +/** @addtogroup UART_Private_variables + * @{ + */ +const uint16_t UARTPrescTable[12] = {1U, 2U, 4U, 6U, 8U, 10U, 12U, 16U, 32U, 64U, 128U, 256U}; +/** + * @} + */ + +#endif /* USART_PRESC_PRESCALER */ +/* Exported Constants --------------------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup UART_Exported_Functions UART Exported Functions + * @{ + */ + +/** @defgroup UART_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and Configuration functions + * +@verbatim +=============================================================================== + ##### Initialization and Configuration functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to initialize the USARTx or the UARTy + in asynchronous mode. + (+) For the asynchronous mode the parameters below can be configured: + (++) Baud Rate + (++) Word Length + (++) Stop Bit + (++) Parity: If the parity is enabled, then the MSB bit of the data written + in the data register is transmitted but is changed by the parity bit. + (++) Hardware flow control + (++) Receiver/transmitter modes + (++) Over Sampling Method + (++) One-Bit Sampling Method + (+) For the asynchronous mode, the following advanced features can be configured as well: + (++) TX and/or RX pin level inversion + (++) data logical level inversion + (++) RX and TX pins swap + (++) RX overrun detection disabling + (++) DMA disabling on RX error + (++) MSB first on communication line + (++) auto Baud rate detection + [..] + The HAL_UART_Init(), HAL_HalfDuplex_Init(), HAL_LIN_Init()and HAL_MultiProcessor_Init()API + follow respectively the UART asynchronous, UART Half duplex, UART LIN mode + and UART multiprocessor mode configuration procedures (details for the procedures + are available in reference manual). + +@endverbatim + + Depending on the frame length defined by the M1 and M0 bits (7-bit, + 8-bit or 9-bit), the possible UART formats are listed in the + following table. + + Table 1. UART frame format. + +-----------------------------------------------------------------------+ + | M1 bit | M0 bit | PCE bit | UART frame | + |---------|---------|-----------|---------------------------------------| + | 0 | 0 | 0 | | SB | 8 bit data | STB | | + |---------|---------|-----------|---------------------------------------| + | 0 | 0 | 1 | | SB | 7 bit data | PB | STB | | + |---------|---------|-----------|---------------------------------------| + | 0 | 1 | 0 | | SB | 9 bit data | STB | | + |---------|---------|-----------|---------------------------------------| + | 0 | 1 | 1 | | SB | 8 bit data | PB | STB | | + |---------|---------|-----------|---------------------------------------| + | 1 | 0 | 0 | | SB | 7 bit data | STB | | + |---------|---------|-----------|---------------------------------------| + | 1 | 0 | 1 | | SB | 6 bit data | PB | STB | | + +-----------------------------------------------------------------------+ + + * @{ + */ + +/** + * @brief Initialize the UART mode according to the specified + * parameters in the UART_InitTypeDef and initialize the associated handle. + * @param huart UART handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_Init(UART_HandleTypeDef *huart) +{ + /* Check the UART handle allocation */ + if (huart == NULL) + { + return HAL_ERROR; + } + + if (huart->Init.HwFlowCtl != UART_HWCONTROL_NONE) + { + /* Check the parameters */ + assert_param(IS_UART_HWFLOW_INSTANCE(huart->Instance)); + } + else + { + /* Check the parameters */ + assert_param((IS_UART_INSTANCE(huart->Instance)) || (IS_LPUART_INSTANCE(huart->Instance))); + } + + if (huart->gState == HAL_UART_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + huart->Lock = HAL_UNLOCKED; + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + UART_InitCallbacksToDefault(huart); + + if (huart->MspInitCallback == NULL) + { + huart->MspInitCallback = HAL_UART_MspInit; + } + + /* Init the low level hardware */ + huart->MspInitCallback(huart); +#else + /* Init the low level hardware : GPIO, CLOCK */ + HAL_UART_MspInit(huart); +#endif /* (USE_HAL_UART_REGISTER_CALLBACKS) */ + } + + huart->gState = HAL_UART_STATE_BUSY; + + __HAL_UART_DISABLE(huart); + + /* Perform advanced settings configuration */ + /* For some items, configuration requires to be done prior TE and RE bits are set */ + if (huart->AdvancedInit.AdvFeatureInit != UART_ADVFEATURE_NO_INIT) + { + UART_AdvFeatureConfig(huart); + } + + /* Set the UART Communication parameters */ + if (UART_SetConfig(huart) == HAL_ERROR) + { + return HAL_ERROR; + } + + /* In asynchronous mode, the following bits must be kept cleared: + - LINEN and CLKEN bits in the USART_CR2 register, + - SCEN, HDSEL and IREN bits in the USART_CR3 register.*/ + CLEAR_BIT(huart->Instance->CR2, (USART_CR2_LINEN | USART_CR2_CLKEN)); + CLEAR_BIT(huart->Instance->CR3, (USART_CR3_SCEN | USART_CR3_HDSEL | USART_CR3_IREN)); + + __HAL_UART_ENABLE(huart); + + /* TEACK and/or REACK to check before moving huart->gState and huart->RxState to Ready */ + return (UART_CheckIdleState(huart)); +} + +/** + * @brief Initialize the half-duplex mode according to the specified + * parameters in the UART_InitTypeDef and creates the associated handle. + * @param huart UART handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_HalfDuplex_Init(UART_HandleTypeDef *huart) +{ + /* Check the UART handle allocation */ + if (huart == NULL) + { + return HAL_ERROR; + } + + /* Check UART instance */ + assert_param(IS_UART_HALFDUPLEX_INSTANCE(huart->Instance)); + + if (huart->gState == HAL_UART_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + huart->Lock = HAL_UNLOCKED; + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + UART_InitCallbacksToDefault(huart); + + if (huart->MspInitCallback == NULL) + { + huart->MspInitCallback = HAL_UART_MspInit; + } + + /* Init the low level hardware */ + huart->MspInitCallback(huart); +#else + /* Init the low level hardware : GPIO, CLOCK */ + HAL_UART_MspInit(huart); +#endif /* (USE_HAL_UART_REGISTER_CALLBACKS) */ + } + + huart->gState = HAL_UART_STATE_BUSY; + + __HAL_UART_DISABLE(huart); + + /* Perform advanced settings configuration */ + /* For some items, configuration requires to be done prior TE and RE bits are set */ + if (huart->AdvancedInit.AdvFeatureInit != UART_ADVFEATURE_NO_INIT) + { + UART_AdvFeatureConfig(huart); + } + + /* Set the UART Communication parameters */ + if (UART_SetConfig(huart) == HAL_ERROR) + { + return HAL_ERROR; + } + + /* In half-duplex mode, the following bits must be kept cleared: + - LINEN and CLKEN bits in the USART_CR2 register, + - SCEN and IREN bits in the USART_CR3 register.*/ + CLEAR_BIT(huart->Instance->CR2, (USART_CR2_LINEN | USART_CR2_CLKEN)); + CLEAR_BIT(huart->Instance->CR3, (USART_CR3_IREN | USART_CR3_SCEN)); + + /* Enable the Half-Duplex mode by setting the HDSEL bit in the CR3 register */ + SET_BIT(huart->Instance->CR3, USART_CR3_HDSEL); + + __HAL_UART_ENABLE(huart); + + /* TEACK and/or REACK to check before moving huart->gState and huart->RxState to Ready */ + return (UART_CheckIdleState(huart)); +} + + +/** + * @brief Initialize the LIN mode according to the specified + * parameters in the UART_InitTypeDef and creates the associated handle. + * @param huart UART handle. + * @param BreakDetectLength Specifies the LIN break detection length. + * This parameter can be one of the following values: + * @arg @ref UART_LINBREAKDETECTLENGTH_10B 10-bit break detection + * @arg @ref UART_LINBREAKDETECTLENGTH_11B 11-bit break detection + * @retval HAL status + */ +HAL_StatusTypeDef HAL_LIN_Init(UART_HandleTypeDef *huart, uint32_t BreakDetectLength) +{ + /* Check the UART handle allocation */ + if (huart == NULL) + { + return HAL_ERROR; + } + + /* Check the LIN UART instance */ + assert_param(IS_UART_LIN_INSTANCE(huart->Instance)); + /* Check the Break detection length parameter */ + assert_param(IS_UART_LIN_BREAK_DETECT_LENGTH(BreakDetectLength)); + + /* LIN mode limited to 16-bit oversampling only */ + if (huart->Init.OverSampling == UART_OVERSAMPLING_8) + { + return HAL_ERROR; + } + /* LIN mode limited to 8-bit data length */ + if (huart->Init.WordLength != UART_WORDLENGTH_8B) + { + return HAL_ERROR; + } + + if (huart->gState == HAL_UART_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + huart->Lock = HAL_UNLOCKED; + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + UART_InitCallbacksToDefault(huart); + + if (huart->MspInitCallback == NULL) + { + huart->MspInitCallback = HAL_UART_MspInit; + } + + /* Init the low level hardware */ + huart->MspInitCallback(huart); +#else + /* Init the low level hardware : GPIO, CLOCK */ + HAL_UART_MspInit(huart); +#endif /* (USE_HAL_UART_REGISTER_CALLBACKS) */ + } + + huart->gState = HAL_UART_STATE_BUSY; + + __HAL_UART_DISABLE(huart); + + /* Perform advanced settings configuration */ + /* For some items, configuration requires to be done prior TE and RE bits are set */ + if (huart->AdvancedInit.AdvFeatureInit != UART_ADVFEATURE_NO_INIT) + { + UART_AdvFeatureConfig(huart); + } + + /* Set the UART Communication parameters */ + if (UART_SetConfig(huart) == HAL_ERROR) + { + return HAL_ERROR; + } + + /* In LIN mode, the following bits must be kept cleared: + - LINEN and CLKEN bits in the USART_CR2 register, + - SCEN and IREN bits in the USART_CR3 register.*/ + CLEAR_BIT(huart->Instance->CR2, USART_CR2_CLKEN); + CLEAR_BIT(huart->Instance->CR3, (USART_CR3_HDSEL | USART_CR3_IREN | USART_CR3_SCEN)); + + /* Enable the LIN mode by setting the LINEN bit in the CR2 register */ + SET_BIT(huart->Instance->CR2, USART_CR2_LINEN); + + /* Set the USART LIN Break detection length. */ + MODIFY_REG(huart->Instance->CR2, USART_CR2_LBDL, BreakDetectLength); + + __HAL_UART_ENABLE(huart); + + /* TEACK and/or REACK to check before moving huart->gState and huart->RxState to Ready */ + return (UART_CheckIdleState(huart)); +} + + +/** + * @brief Initialize the multiprocessor mode according to the specified + * parameters in the UART_InitTypeDef and initialize the associated handle. + * @param huart UART handle. + * @param Address UART node address (4-, 6-, 7- or 8-bit long). + * @param WakeUpMethod Specifies the UART wakeup method. + * This parameter can be one of the following values: + * @arg @ref UART_WAKEUPMETHOD_IDLELINE WakeUp by an idle line detection + * @arg @ref UART_WAKEUPMETHOD_ADDRESSMARK WakeUp by an address mark + * @note If the user resorts to idle line detection wake up, the Address parameter + * is useless and ignored by the initialization function. + * @note If the user resorts to address mark wake up, the address length detection + * is configured by default to 4 bits only. For the UART to be able to + * manage 6-, 7- or 8-bit long addresses detection, the API + * HAL_MultiProcessorEx_AddressLength_Set() must be called after + * HAL_MultiProcessor_Init(). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_MultiProcessor_Init(UART_HandleTypeDef *huart, uint8_t Address, uint32_t WakeUpMethod) +{ + /* Check the UART handle allocation */ + if (huart == NULL) + { + return HAL_ERROR; + } + + /* Check the wake up method parameter */ + assert_param(IS_UART_WAKEUPMETHOD(WakeUpMethod)); + + if (huart->gState == HAL_UART_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + huart->Lock = HAL_UNLOCKED; + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + UART_InitCallbacksToDefault(huart); + + if (huart->MspInitCallback == NULL) + { + huart->MspInitCallback = HAL_UART_MspInit; + } + + /* Init the low level hardware */ + huart->MspInitCallback(huart); +#else + /* Init the low level hardware : GPIO, CLOCK */ + HAL_UART_MspInit(huart); +#endif /* (USE_HAL_UART_REGISTER_CALLBACKS) */ + } + + huart->gState = HAL_UART_STATE_BUSY; + + __HAL_UART_DISABLE(huart); + + /* Perform advanced settings configuration */ + /* For some items, configuration requires to be done prior TE and RE bits are set */ + if (huart->AdvancedInit.AdvFeatureInit != UART_ADVFEATURE_NO_INIT) + { + UART_AdvFeatureConfig(huart); + } + + /* Set the UART Communication parameters */ + if (UART_SetConfig(huart) == HAL_ERROR) + { + return HAL_ERROR; + } + + /* In multiprocessor mode, the following bits must be kept cleared: + - LINEN and CLKEN bits in the USART_CR2 register, + - SCEN, HDSEL and IREN bits in the USART_CR3 register. */ + CLEAR_BIT(huart->Instance->CR2, (USART_CR2_LINEN | USART_CR2_CLKEN)); + CLEAR_BIT(huart->Instance->CR3, (USART_CR3_SCEN | USART_CR3_HDSEL | USART_CR3_IREN)); + + if (WakeUpMethod == UART_WAKEUPMETHOD_ADDRESSMARK) + { + /* If address mark wake up method is chosen, set the USART address node */ + MODIFY_REG(huart->Instance->CR2, USART_CR2_ADD, ((uint32_t)Address << UART_CR2_ADDRESS_LSB_POS)); + } + + /* Set the wake up method by setting the WAKE bit in the CR1 register */ + MODIFY_REG(huart->Instance->CR1, USART_CR1_WAKE, WakeUpMethod); + + __HAL_UART_ENABLE(huart); + + /* TEACK and/or REACK to check before moving huart->gState and huart->RxState to Ready */ + return (UART_CheckIdleState(huart)); +} + + +/** + * @brief DeInitialize the UART peripheral. + * @param huart UART handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_DeInit(UART_HandleTypeDef *huart) +{ + /* Check the UART handle allocation */ + if (huart == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param((IS_UART_INSTANCE(huart->Instance)) || (IS_LPUART_INSTANCE(huart->Instance))); + + huart->gState = HAL_UART_STATE_BUSY; + + __HAL_UART_DISABLE(huart); + + huart->Instance->CR1 = 0x0U; + huart->Instance->CR2 = 0x0U; + huart->Instance->CR3 = 0x0U; + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + if (huart->MspDeInitCallback == NULL) + { + huart->MspDeInitCallback = HAL_UART_MspDeInit; + } + /* DeInit the low level hardware */ + huart->MspDeInitCallback(huart); +#else + /* DeInit the low level hardware */ + HAL_UART_MspDeInit(huart); +#endif /* (USE_HAL_UART_REGISTER_CALLBACKS) */ + + huart->ErrorCode = HAL_UART_ERROR_NONE; + huart->gState = HAL_UART_STATE_RESET; + huart->RxState = HAL_UART_STATE_RESET; + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + huart->RxEventType = HAL_UART_RXEVENT_TC; + + __HAL_UNLOCK(huart); + + return HAL_OK; +} + +/** + * @brief Initialize the UART MSP. + * @param huart UART handle. + * @retval None + */ +__weak void HAL_UART_MspInit(UART_HandleTypeDef *huart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(huart); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_UART_MspInit can be implemented in the user file + */ +} + +/** + * @brief DeInitialize the UART MSP. + * @param huart UART handle. + * @retval None + */ +__weak void HAL_UART_MspDeInit(UART_HandleTypeDef *huart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(huart); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_UART_MspDeInit can be implemented in the user file + */ +} + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) +/** + * @brief Register a User UART Callback + * To be used to override the weak predefined callback + * @note The HAL_UART_RegisterCallback() may be called before HAL_UART_Init(), HAL_HalfDuplex_Init(), + * HAL_LIN_Init(), HAL_MultiProcessor_Init() or HAL_RS485Ex_Init() in HAL_UART_STATE_RESET to register + * callbacks for HAL_UART_MSPINIT_CB_ID and HAL_UART_MSPDEINIT_CB_ID + * @param huart uart handle + * @param CallbackID ID of the callback to be registered + * This parameter can be one of the following values: + * @arg @ref HAL_UART_TX_HALFCOMPLETE_CB_ID Tx Half Complete Callback ID + * @arg @ref HAL_UART_TX_COMPLETE_CB_ID Tx Complete Callback ID + * @arg @ref HAL_UART_RX_HALFCOMPLETE_CB_ID Rx Half Complete Callback ID + * @arg @ref HAL_UART_RX_COMPLETE_CB_ID Rx Complete Callback ID + * @arg @ref HAL_UART_ERROR_CB_ID Error Callback ID + * @arg @ref HAL_UART_ABORT_COMPLETE_CB_ID Abort Complete Callback ID + * @arg @ref HAL_UART_ABORT_TRANSMIT_COMPLETE_CB_ID Abort Transmit Complete Callback ID + * @arg @ref HAL_UART_ABORT_RECEIVE_COMPLETE_CB_ID Abort Receive Complete Callback ID + * @arg @ref HAL_UART_WAKEUP_CB_ID Wakeup Callback ID +#if defined(USART_CR1_FIFOEN) + * @arg @ref HAL_UART_RX_FIFO_FULL_CB_ID Rx Fifo Full Callback ID + * @arg @ref HAL_UART_TX_FIFO_EMPTY_CB_ID Tx Fifo Empty Callback ID +#endif + * @arg @ref HAL_UART_MSPINIT_CB_ID MspInit Callback ID + * @arg @ref HAL_UART_MSPDEINIT_CB_ID MspDeInit Callback ID + * @param pCallback pointer to the Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_RegisterCallback(UART_HandleTypeDef *huart, HAL_UART_CallbackIDTypeDef CallbackID, + pUART_CallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + huart->ErrorCode |= HAL_UART_ERROR_INVALID_CALLBACK; + + return HAL_ERROR; + } + + if (huart->gState == HAL_UART_STATE_READY) + { + switch (CallbackID) + { + case HAL_UART_TX_HALFCOMPLETE_CB_ID : + huart->TxHalfCpltCallback = pCallback; + break; + + case HAL_UART_TX_COMPLETE_CB_ID : + huart->TxCpltCallback = pCallback; + break; + + case HAL_UART_RX_HALFCOMPLETE_CB_ID : + huart->RxHalfCpltCallback = pCallback; + break; + + case HAL_UART_RX_COMPLETE_CB_ID : + huart->RxCpltCallback = pCallback; + break; + + case HAL_UART_ERROR_CB_ID : + huart->ErrorCallback = pCallback; + break; + + case HAL_UART_ABORT_COMPLETE_CB_ID : + huart->AbortCpltCallback = pCallback; + break; + + case HAL_UART_ABORT_TRANSMIT_COMPLETE_CB_ID : + huart->AbortTransmitCpltCallback = pCallback; + break; + + case HAL_UART_ABORT_RECEIVE_COMPLETE_CB_ID : + huart->AbortReceiveCpltCallback = pCallback; + break; + + case HAL_UART_WAKEUP_CB_ID : + huart->WakeupCallback = pCallback; + break; + +#if defined(USART_CR1_FIFOEN) + case HAL_UART_RX_FIFO_FULL_CB_ID : + huart->RxFifoFullCallback = pCallback; + break; + + case HAL_UART_TX_FIFO_EMPTY_CB_ID : + huart->TxFifoEmptyCallback = pCallback; + break; +#endif /* USART_CR1_FIFOEN */ + + case HAL_UART_MSPINIT_CB_ID : + huart->MspInitCallback = pCallback; + break; + + case HAL_UART_MSPDEINIT_CB_ID : + huart->MspDeInitCallback = pCallback; + break; + + default : + huart->ErrorCode |= HAL_UART_ERROR_INVALID_CALLBACK; + + status = HAL_ERROR; + break; + } + } + else if (huart->gState == HAL_UART_STATE_RESET) + { + switch (CallbackID) + { + case HAL_UART_MSPINIT_CB_ID : + huart->MspInitCallback = pCallback; + break; + + case HAL_UART_MSPDEINIT_CB_ID : + huart->MspDeInitCallback = pCallback; + break; + + default : + huart->ErrorCode |= HAL_UART_ERROR_INVALID_CALLBACK; + + status = HAL_ERROR; + break; + } + } + else + { + huart->ErrorCode |= HAL_UART_ERROR_INVALID_CALLBACK; + + status = HAL_ERROR; + } + + return status; +} + +/** + * @brief Unregister an UART Callback + * UART callaback is redirected to the weak predefined callback + * @note The HAL_UART_UnRegisterCallback() may be called before HAL_UART_Init(), HAL_HalfDuplex_Init(), + * HAL_LIN_Init(), HAL_MultiProcessor_Init() or HAL_RS485Ex_Init() in HAL_UART_STATE_RESET to un-register + * callbacks for HAL_UART_MSPINIT_CB_ID and HAL_UART_MSPDEINIT_CB_ID + * @param huart uart handle + * @param CallbackID ID of the callback to be unregistered + * This parameter can be one of the following values: + * @arg @ref HAL_UART_TX_HALFCOMPLETE_CB_ID Tx Half Complete Callback ID + * @arg @ref HAL_UART_TX_COMPLETE_CB_ID Tx Complete Callback ID + * @arg @ref HAL_UART_RX_HALFCOMPLETE_CB_ID Rx Half Complete Callback ID + * @arg @ref HAL_UART_RX_COMPLETE_CB_ID Rx Complete Callback ID + * @arg @ref HAL_UART_ERROR_CB_ID Error Callback ID + * @arg @ref HAL_UART_ABORT_COMPLETE_CB_ID Abort Complete Callback ID + * @arg @ref HAL_UART_ABORT_TRANSMIT_COMPLETE_CB_ID Abort Transmit Complete Callback ID + * @arg @ref HAL_UART_ABORT_RECEIVE_COMPLETE_CB_ID Abort Receive Complete Callback ID + * @arg @ref HAL_UART_WAKEUP_CB_ID Wakeup Callback ID +#if defined(USART_CR1_FIFOEN) + * @arg @ref HAL_UART_RX_FIFO_FULL_CB_ID Rx Fifo Full Callback ID + * @arg @ref HAL_UART_TX_FIFO_EMPTY_CB_ID Tx Fifo Empty Callback ID +#endif + * @arg @ref HAL_UART_MSPINIT_CB_ID MspInit Callback ID + * @arg @ref HAL_UART_MSPDEINIT_CB_ID MspDeInit Callback ID + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_UnRegisterCallback(UART_HandleTypeDef *huart, HAL_UART_CallbackIDTypeDef CallbackID) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (HAL_UART_STATE_READY == huart->gState) + { + switch (CallbackID) + { + case HAL_UART_TX_HALFCOMPLETE_CB_ID : + huart->TxHalfCpltCallback = HAL_UART_TxHalfCpltCallback; /* Legacy weak TxHalfCpltCallback */ + break; + + case HAL_UART_TX_COMPLETE_CB_ID : + huart->TxCpltCallback = HAL_UART_TxCpltCallback; /* Legacy weak TxCpltCallback */ + break; + + case HAL_UART_RX_HALFCOMPLETE_CB_ID : + huart->RxHalfCpltCallback = HAL_UART_RxHalfCpltCallback; /* Legacy weak RxHalfCpltCallback */ + break; + + case HAL_UART_RX_COMPLETE_CB_ID : + huart->RxCpltCallback = HAL_UART_RxCpltCallback; /* Legacy weak RxCpltCallback */ + break; + + case HAL_UART_ERROR_CB_ID : + huart->ErrorCallback = HAL_UART_ErrorCallback; /* Legacy weak ErrorCallback */ + break; + + case HAL_UART_ABORT_COMPLETE_CB_ID : + huart->AbortCpltCallback = HAL_UART_AbortCpltCallback; /* Legacy weak AbortCpltCallback */ + break; + + case HAL_UART_ABORT_TRANSMIT_COMPLETE_CB_ID : + huart->AbortTransmitCpltCallback = HAL_UART_AbortTransmitCpltCallback; /* Legacy weak + AbortTransmitCpltCallback */ + break; + + case HAL_UART_ABORT_RECEIVE_COMPLETE_CB_ID : + huart->AbortReceiveCpltCallback = HAL_UART_AbortReceiveCpltCallback; /* Legacy weak + AbortReceiveCpltCallback */ + break; + + case HAL_UART_WAKEUP_CB_ID : + huart->WakeupCallback = HAL_UARTEx_WakeupCallback; /* Legacy weak WakeupCallback */ + break; + +#if defined(USART_CR1_FIFOEN) + case HAL_UART_RX_FIFO_FULL_CB_ID : + huart->RxFifoFullCallback = HAL_UARTEx_RxFifoFullCallback; /* Legacy weak RxFifoFullCallback */ + break; + + case HAL_UART_TX_FIFO_EMPTY_CB_ID : + huart->TxFifoEmptyCallback = HAL_UARTEx_TxFifoEmptyCallback; /* Legacy weak TxFifoEmptyCallback */ + break; + +#endif /* USART_CR1_FIFOEN */ + case HAL_UART_MSPINIT_CB_ID : + huart->MspInitCallback = HAL_UART_MspInit; /* Legacy weak MspInitCallback */ + break; + + case HAL_UART_MSPDEINIT_CB_ID : + huart->MspDeInitCallback = HAL_UART_MspDeInit; /* Legacy weak MspDeInitCallback */ + break; + + default : + huart->ErrorCode |= HAL_UART_ERROR_INVALID_CALLBACK; + + status = HAL_ERROR; + break; + } + } + else if (HAL_UART_STATE_RESET == huart->gState) + { + switch (CallbackID) + { + case HAL_UART_MSPINIT_CB_ID : + huart->MspInitCallback = HAL_UART_MspInit; + break; + + case HAL_UART_MSPDEINIT_CB_ID : + huart->MspDeInitCallback = HAL_UART_MspDeInit; + break; + + default : + huart->ErrorCode |= HAL_UART_ERROR_INVALID_CALLBACK; + + status = HAL_ERROR; + break; + } + } + else + { + huart->ErrorCode |= HAL_UART_ERROR_INVALID_CALLBACK; + + status = HAL_ERROR; + } + + return status; +} + +/** + * @brief Register a User UART Rx Event Callback + * To be used instead of the weak predefined callback + * @param huart Uart handle + * @param pCallback Pointer to the Rx Event Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_RegisterRxEventCallback(UART_HandleTypeDef *huart, pUART_RxEventCallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + huart->ErrorCode |= HAL_UART_ERROR_INVALID_CALLBACK; + + return HAL_ERROR; + } + + if (huart->RxState == HAL_UART_STATE_READY) + { + huart->RxEventCallback = pCallback; + } + else + { + huart->ErrorCode |= HAL_UART_ERROR_INVALID_CALLBACK; + + status = HAL_ERROR; + } + + return status; +} + +/** + * @brief UnRegister the UART Rx Event Callback + * UART Rx Event Callback is redirected to the weak HAL_UARTEx_RxEventCallback() predefined callback + * @param huart Uart handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_UnRegisterRxEventCallback(UART_HandleTypeDef *huart) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (huart->RxState == HAL_UART_STATE_READY) + { + huart->RxEventCallback = HAL_UARTEx_RxEventCallback; /* Legacy weak UART Rx Event Callback */ + } + else + { + huart->ErrorCode |= HAL_UART_ERROR_INVALID_CALLBACK; + + status = HAL_ERROR; + } + + return status; +} + +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** @defgroup UART_Exported_Functions_Group2 IO operation functions + * @brief UART Transmit/Receive functions + * +@verbatim + =============================================================================== + ##### IO operation functions ##### + =============================================================================== + This subsection provides a set of functions allowing to manage the UART asynchronous + and Half duplex data transfers. + + (#) There are two mode of transfer: + (+) Blocking mode: The communication is performed in polling mode. + The HAL status of all data processing is returned by the same function + after finishing transfer. + (+) Non-Blocking mode: The communication is performed using Interrupts + or DMA, These API's return the HAL status. + The end of the data processing will be indicated through the + dedicated UART IRQ when using Interrupt mode or the DMA IRQ when + using DMA mode. + The HAL_UART_TxCpltCallback(), HAL_UART_RxCpltCallback() user callbacks + will be executed respectively at the end of the transmit or Receive process + The HAL_UART_ErrorCallback()user callback will be executed when a communication error is detected + + (#) Blocking mode API's are : + (+) HAL_UART_Transmit() + (+) HAL_UART_Receive() + + (#) Non-Blocking mode API's with Interrupt are : + (+) HAL_UART_Transmit_IT() + (+) HAL_UART_Receive_IT() + (+) HAL_UART_IRQHandler() + + (#) Non-Blocking mode API's with DMA are : + (+) HAL_UART_Transmit_DMA() + (+) HAL_UART_Receive_DMA() + (+) HAL_UART_DMAPause() + (+) HAL_UART_DMAResume() + (+) HAL_UART_DMAStop() + + (#) A set of Transfer Complete Callbacks are provided in Non_Blocking mode: + (+) HAL_UART_TxHalfCpltCallback() + (+) HAL_UART_TxCpltCallback() + (+) HAL_UART_RxHalfCpltCallback() + (+) HAL_UART_RxCpltCallback() + (+) HAL_UART_ErrorCallback() + + (#) Non-Blocking mode transfers could be aborted using Abort API's : + (+) HAL_UART_Abort() + (+) HAL_UART_AbortTransmit() + (+) HAL_UART_AbortReceive() + (+) HAL_UART_Abort_IT() + (+) HAL_UART_AbortTransmit_IT() + (+) HAL_UART_AbortReceive_IT() + + (#) For Abort services based on interrupts (HAL_UART_Abortxxx_IT), a set of Abort Complete Callbacks are provided: + (+) HAL_UART_AbortCpltCallback() + (+) HAL_UART_AbortTransmitCpltCallback() + (+) HAL_UART_AbortReceiveCpltCallback() + + (#) A Rx Event Reception Callback (Rx event notification) is available for Non_Blocking modes of enhanced + reception services: + (+) HAL_UARTEx_RxEventCallback() + + (#) In Non-Blocking mode transfers, possible errors are split into 2 categories. + Errors are handled as follows : + (+) Error is considered as Recoverable and non blocking : Transfer could go till end, but error severity is + to be evaluated by user : this concerns Frame Error, Parity Error or Noise Error + in Interrupt mode reception . + Received character is then retrieved and stored in Rx buffer, Error code is set to allow user + to identify error type, and HAL_UART_ErrorCallback() user callback is executed. + Transfer is kept ongoing on UART side. + If user wants to abort it, Abort services should be called by user. + (+) Error is considered as Blocking : Transfer could not be completed properly and is aborted. + This concerns Overrun Error In Interrupt mode reception and all errors in DMA mode. + Error code is set to allow user to identify error type, and HAL_UART_ErrorCallback() + user callback is executed. + + -@- In the Half duplex communication, it is forbidden to run the transmit + and receive process in parallel, the UART state HAL_UART_STATE_BUSY_TX_RX can't be useful. + +@endverbatim + * @{ + */ + +/** + * @brief Send an amount of data in blocking mode. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the sent data is handled as a set of u16. In this case, Size must indicate the number + * of u16 provided through pData. + * @note When FIFO mode is enabled, writing a data in the TDR register adds one + * data to the TXFIFO. Write operations to the TDR register are performed + * when TXFNF flag is set. From hardware perspective, TXFNF flag and + * TXE are mapped on the same bit-field. + * @param huart UART handle. + * @param pData Pointer to data buffer (u8 or u16 data elements). + * @param Size Amount of data elements (u8 or u16) to be sent. + * @param Timeout Timeout duration. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_Transmit(UART_HandleTypeDef *huart, const uint8_t *pData, uint16_t Size, uint32_t Timeout) +{ + const uint8_t *pdata8bits; + const uint16_t *pdata16bits; + uint32_t tickstart; + + /* Check that a Tx process is not already ongoing */ + if (huart->gState == HAL_UART_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + huart->ErrorCode = HAL_UART_ERROR_NONE; + huart->gState = HAL_UART_STATE_BUSY_TX; + + /* Init tickstart for timeout management */ + tickstart = HAL_GetTick(); + + huart->TxXferSize = Size; + huart->TxXferCount = Size; + + /* In case of 9bits/No Parity transfer, pData needs to be handled as a uint16_t pointer */ + if ((huart->Init.WordLength == UART_WORDLENGTH_9B) && (huart->Init.Parity == UART_PARITY_NONE)) + { + pdata8bits = NULL; + pdata16bits = (const uint16_t *) pData; + } + else + { + pdata8bits = pData; + pdata16bits = NULL; + } + + while (huart->TxXferCount > 0U) + { + if (UART_WaitOnFlagUntilTimeout(huart, UART_FLAG_TXE, RESET, tickstart, Timeout) != HAL_OK) + { + + huart->gState = HAL_UART_STATE_READY; + + return HAL_TIMEOUT; + } + if (pdata8bits == NULL) + { + huart->Instance->TDR = (uint16_t)(*pdata16bits & 0x01FFU); + pdata16bits++; + } + else + { + huart->Instance->TDR = (uint8_t)(*pdata8bits & 0xFFU); + pdata8bits++; + } + huart->TxXferCount--; + } + + if (UART_WaitOnFlagUntilTimeout(huart, UART_FLAG_TC, RESET, tickstart, Timeout) != HAL_OK) + { + huart->gState = HAL_UART_STATE_READY; + + return HAL_TIMEOUT; + } + + /* At end of Tx process, restore huart->gState to Ready */ + huart->gState = HAL_UART_STATE_READY; + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive an amount of data in blocking mode. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the received data is handled as a set of u16. In this case, Size must indicate the number + * of u16 available through pData. + * @note When FIFO mode is enabled, the RXFNE flag is set as long as the RXFIFO + * is not empty. Read operations from the RDR register are performed when + * RXFNE flag is set. From hardware perspective, RXFNE flag and + * RXNE are mapped on the same bit-field. + * @param huart UART handle. + * @param pData Pointer to data buffer (u8 or u16 data elements). + * @param Size Amount of data elements (u8 or u16) to be received. + * @param Timeout Timeout duration. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_Receive(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint32_t Timeout) +{ + uint8_t *pdata8bits; + uint16_t *pdata16bits; + uint16_t uhMask; + uint32_t tickstart; + + /* Check that a Rx process is not already ongoing */ + if (huart->RxState == HAL_UART_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + huart->ErrorCode = HAL_UART_ERROR_NONE; + huart->RxState = HAL_UART_STATE_BUSY_RX; + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + /* Init tickstart for timeout management */ + tickstart = HAL_GetTick(); + + huart->RxXferSize = Size; + huart->RxXferCount = Size; + + /* Computation of UART mask to apply to RDR register */ + UART_MASK_COMPUTATION(huart); + uhMask = huart->Mask; + + /* In case of 9bits/No Parity transfer, pRxData needs to be handled as a uint16_t pointer */ + if ((huart->Init.WordLength == UART_WORDLENGTH_9B) && (huart->Init.Parity == UART_PARITY_NONE)) + { + pdata8bits = NULL; + pdata16bits = (uint16_t *) pData; + } + else + { + pdata8bits = pData; + pdata16bits = NULL; + } + + /* as long as data have to be received */ + while (huart->RxXferCount > 0U) + { + if (UART_WaitOnFlagUntilTimeout(huart, UART_FLAG_RXNE, RESET, tickstart, Timeout) != HAL_OK) + { + huart->RxState = HAL_UART_STATE_READY; + + return HAL_TIMEOUT; + } + if (pdata8bits == NULL) + { + *pdata16bits = (uint16_t)(huart->Instance->RDR & uhMask); + pdata16bits++; + } + else + { + *pdata8bits = (uint8_t)(huart->Instance->RDR & (uint8_t)uhMask); + pdata8bits++; + } + huart->RxXferCount--; + } + + /* At end of Rx process, restore huart->RxState to Ready */ + huart->RxState = HAL_UART_STATE_READY; + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Send an amount of data in interrupt mode. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the sent data is handled as a set of u16. In this case, Size must indicate the number + * of u16 provided through pData. + * @param huart UART handle. + * @param pData Pointer to data buffer (u8 or u16 data elements). + * @param Size Amount of data elements (u8 or u16) to be sent. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_Transmit_IT(UART_HandleTypeDef *huart, const uint8_t *pData, uint16_t Size) +{ + /* Check that a Tx process is not already ongoing */ + if (huart->gState == HAL_UART_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + huart->pTxBuffPtr = pData; + huart->TxXferSize = Size; + huart->TxXferCount = Size; + huart->TxISR = NULL; + + huart->ErrorCode = HAL_UART_ERROR_NONE; + huart->gState = HAL_UART_STATE_BUSY_TX; + +#if defined(USART_CR1_FIFOEN) + /* Configure Tx interrupt processing */ + if (huart->FifoMode == UART_FIFOMODE_ENABLE) + { + /* Set the Tx ISR function pointer according to the data word length */ + if ((huart->Init.WordLength == UART_WORDLENGTH_9B) && (huart->Init.Parity == UART_PARITY_NONE)) + { + huart->TxISR = UART_TxISR_16BIT_FIFOEN; + } + else + { + huart->TxISR = UART_TxISR_8BIT_FIFOEN; + } + + /* Enable the TX FIFO threshold interrupt */ + ATOMIC_SET_BIT(huart->Instance->CR3, USART_CR3_TXFTIE); + } + else + { + /* Set the Tx ISR function pointer according to the data word length */ + if ((huart->Init.WordLength == UART_WORDLENGTH_9B) && (huart->Init.Parity == UART_PARITY_NONE)) + { + huart->TxISR = UART_TxISR_16BIT; + } + else + { + huart->TxISR = UART_TxISR_8BIT; + } + + /* Enable the Transmit Data Register Empty interrupt */ + ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_TXEIE_TXFNFIE); + } +#else + /* Set the Tx ISR function pointer according to the data word length */ + if ((huart->Init.WordLength == UART_WORDLENGTH_9B) && (huart->Init.Parity == UART_PARITY_NONE)) + { + huart->TxISR = UART_TxISR_16BIT; + } + else + { + huart->TxISR = UART_TxISR_8BIT; + } + + /* Enable the Transmit Data Register Empty interrupt */ + ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_TXEIE); +#endif /* USART_CR1_FIFOEN */ + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive an amount of data in interrupt mode. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the received data is handled as a set of u16. In this case, Size must indicate the number + * of u16 available through pData. + * @param huart UART handle. + * @param pData Pointer to data buffer (u8 or u16 data elements). + * @param Size Amount of data elements (u8 or u16) to be received. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_Receive_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size) +{ + /* Check that a Rx process is not already ongoing */ + if (huart->RxState == HAL_UART_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* Set Reception type to Standard reception */ + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + if (!(IS_LPUART_INSTANCE(huart->Instance))) + { + /* Check that USART RTOEN bit is set */ + if (READ_BIT(huart->Instance->CR2, USART_CR2_RTOEN) != 0U) + { + /* Enable the UART Receiver Timeout Interrupt */ + ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_RTOIE); + } + } + + return (UART_Start_Receive_IT(huart, pData, Size)); + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Send an amount of data in DMA mode. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the sent data is handled as a set of u16. In this case, Size must indicate the number + * of u16 provided through pData. + * @param huart UART handle. + * @param pData Pointer to data buffer (u8 or u16 data elements). + * @param Size Amount of data elements (u8 or u16) to be sent. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_Transmit_DMA(UART_HandleTypeDef *huart, const uint8_t *pData, uint16_t Size) +{ + /* Check that a Tx process is not already ongoing */ + if (huart->gState == HAL_UART_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + huart->pTxBuffPtr = pData; + huart->TxXferSize = Size; + huart->TxXferCount = Size; + + huart->ErrorCode = HAL_UART_ERROR_NONE; + huart->gState = HAL_UART_STATE_BUSY_TX; + + if (huart->hdmatx != NULL) + { + /* Set the UART DMA transfer complete callback */ + huart->hdmatx->XferCpltCallback = UART_DMATransmitCplt; + + /* Set the UART DMA Half transfer complete callback */ + huart->hdmatx->XferHalfCpltCallback = UART_DMATxHalfCplt; + + /* Set the DMA error callback */ + huart->hdmatx->XferErrorCallback = UART_DMAError; + + /* Set the DMA abort callback */ + huart->hdmatx->XferAbortCallback = NULL; + + /* Enable the UART transmit DMA channel */ + if (HAL_DMA_Start_IT(huart->hdmatx, (uint32_t)huart->pTxBuffPtr, (uint32_t)&huart->Instance->TDR, Size) != HAL_OK) + { + /* Set error code to DMA */ + huart->ErrorCode = HAL_UART_ERROR_DMA; + + /* Restore huart->gState to ready */ + huart->gState = HAL_UART_STATE_READY; + + return HAL_ERROR; + } + } + /* Clear the TC flag in the ICR register */ + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_TCF); + + /* Enable the DMA transfer for transmit request by setting the DMAT bit + in the UART CR3 register */ + ATOMIC_SET_BIT(huart->Instance->CR3, USART_CR3_DMAT); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive an amount of data in DMA mode. + * @note When the UART parity is enabled (PCE = 1), the received data contain + * the parity bit (MSB position). + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the received data is handled as a set of u16. In this case, Size must indicate the number + * of u16 available through pData. + * @param huart UART handle. + * @param pData Pointer to data buffer (u8 or u16 data elements). + * @param Size Amount of data elements (u8 or u16) to be received. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_Receive_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size) +{ + /* Check that a Rx process is not already ongoing */ + if (huart->RxState == HAL_UART_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* Set Reception type to Standard reception */ + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + if (!(IS_LPUART_INSTANCE(huart->Instance))) + { + /* Check that USART RTOEN bit is set */ + if (READ_BIT(huart->Instance->CR2, USART_CR2_RTOEN) != 0U) + { + /* Enable the UART Receiver Timeout Interrupt */ + ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_RTOIE); + } + } + + return (UART_Start_Receive_DMA(huart, pData, Size)); + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Pause the DMA Transfer. + * @param huart UART handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_DMAPause(UART_HandleTypeDef *huart) +{ + const HAL_UART_StateTypeDef gstate = huart->gState; + const HAL_UART_StateTypeDef rxstate = huart->RxState; + + if ((HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAT)) && + (gstate == HAL_UART_STATE_BUSY_TX)) + { + /* Disable the UART DMA Tx request */ + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAT); + } + if ((HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR)) && + (rxstate == HAL_UART_STATE_BUSY_RX)) + { + /* Disable PE and ERR (Frame error, noise error, overrun error) interrupts */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_PEIE); + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE); + + /* Disable the UART DMA Rx request */ + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR); + } + + return HAL_OK; +} + +/** + * @brief Resume the DMA Transfer. + * @param huart UART handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_DMAResume(UART_HandleTypeDef *huart) +{ + if (huart->gState == HAL_UART_STATE_BUSY_TX) + { + /* Enable the UART DMA Tx request */ + ATOMIC_SET_BIT(huart->Instance->CR3, USART_CR3_DMAT); + } + if (huart->RxState == HAL_UART_STATE_BUSY_RX) + { + /* Clear the Overrun flag before resuming the Rx transfer */ + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_OREF); + + /* Re-enable PE and ERR (Frame error, noise error, overrun error) interrupts */ + if (huart->Init.Parity != UART_PARITY_NONE) + { + ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_PEIE); + } + ATOMIC_SET_BIT(huart->Instance->CR3, USART_CR3_EIE); + + /* Enable the UART DMA Rx request */ + ATOMIC_SET_BIT(huart->Instance->CR3, USART_CR3_DMAR); + } + + return HAL_OK; +} + +/** + * @brief Stop the DMA Transfer. + * @param huart UART handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_DMAStop(UART_HandleTypeDef *huart) +{ + /* The Lock is not implemented on this API to allow the user application + to call the HAL UART API under callbacks HAL_UART_TxCpltCallback() / HAL_UART_RxCpltCallback() / + HAL_UART_TxHalfCpltCallback / HAL_UART_RxHalfCpltCallback: + indeed, when HAL_DMA_Abort() API is called, the DMA TX/RX Transfer or Half Transfer complete + interrupt is generated if the DMA transfer interruption occurs at the middle or at the end of + the stream and the corresponding call back is executed. */ + + const HAL_UART_StateTypeDef gstate = huart->gState; + const HAL_UART_StateTypeDef rxstate = huart->RxState; + + /* Stop UART DMA Tx request if ongoing */ + if ((HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAT)) && + (gstate == HAL_UART_STATE_BUSY_TX)) + { + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAT); + + /* Abort the UART DMA Tx channel */ + if (huart->hdmatx != NULL) + { + if (HAL_DMA_Abort(huart->hdmatx) != HAL_OK) + { + if (HAL_DMA_GetError(huart->hdmatx) == HAL_DMA_ERROR_TIMEOUT) + { + /* Set error code to DMA */ + huart->ErrorCode = HAL_UART_ERROR_DMA; + + return HAL_TIMEOUT; + } + } + } + + UART_EndTxTransfer(huart); + } + + /* Stop UART DMA Rx request if ongoing */ + if ((HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR)) && + (rxstate == HAL_UART_STATE_BUSY_RX)) + { + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR); + + /* Abort the UART DMA Rx channel */ + if (huart->hdmarx != NULL) + { + if (HAL_DMA_Abort(huart->hdmarx) != HAL_OK) + { + if (HAL_DMA_GetError(huart->hdmarx) == HAL_DMA_ERROR_TIMEOUT) + { + /* Set error code to DMA */ + huart->ErrorCode = HAL_UART_ERROR_DMA; + + return HAL_TIMEOUT; + } + } + } + + UART_EndRxTransfer(huart); + } + + return HAL_OK; +} + +/** + * @brief Abort ongoing transfers (blocking mode). + * @param huart UART handle. + * @note This procedure could be used for aborting any ongoing transfer started in Interrupt or DMA mode. + * This procedure performs following operations : + * - Disable UART Interrupts (Tx and Rx) + * - Disable the DMA transfer in the peripheral register (if enabled) + * - Abort DMA transfer by calling HAL_DMA_Abort (in case of transfer in DMA mode) + * - Set handle State to READY + * @note This procedure is executed in blocking mode : when exiting function, Abort is considered as completed. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_Abort(UART_HandleTypeDef *huart) +{ +#if defined(USART_CR1_FIFOEN) + /* Disable TXE, TC, RXNE, PE, RXFT, TXFT and ERR (Frame error, noise error, overrun error) interrupts */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE | + USART_CR1_TXEIE_TXFNFIE | USART_CR1_TCIE)); + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE | USART_CR3_RXFTIE | USART_CR3_TXFTIE); +#else + /* Disable TXEIE, TCIE, RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE | USART_CR1_PEIE | USART_CR1_TXEIE | USART_CR1_TCIE)); + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE); +#endif /* USART_CR1_FIFOEN */ + + /* If Reception till IDLE event was ongoing, disable IDLEIE interrupt */ + if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) + { + ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_IDLEIE)); + } + + /* Abort the UART DMA Tx channel if enabled */ + if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAT)) + { + /* Disable the UART DMA Tx request if enabled */ + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAT); + + /* Abort the UART DMA Tx channel : use blocking DMA Abort API (no callback) */ + if (huart->hdmatx != NULL) + { + /* Set the UART DMA Abort callback to Null. + No call back execution at end of DMA abort procedure */ + huart->hdmatx->XferAbortCallback = NULL; + + if (HAL_DMA_Abort(huart->hdmatx) != HAL_OK) + { + if (HAL_DMA_GetError(huart->hdmatx) == HAL_DMA_ERROR_TIMEOUT) + { + /* Set error code to DMA */ + huart->ErrorCode = HAL_UART_ERROR_DMA; + + return HAL_TIMEOUT; + } + } + } + } + + /* Abort the UART DMA Rx channel if enabled */ + if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR)) + { + /* Disable the UART DMA Rx request if enabled */ + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR); + + /* Abort the UART DMA Rx channel : use blocking DMA Abort API (no callback) */ + if (huart->hdmarx != NULL) + { + /* Set the UART DMA Abort callback to Null. + No call back execution at end of DMA abort procedure */ + huart->hdmarx->XferAbortCallback = NULL; + + if (HAL_DMA_Abort(huart->hdmarx) != HAL_OK) + { + if (HAL_DMA_GetError(huart->hdmarx) == HAL_DMA_ERROR_TIMEOUT) + { + /* Set error code to DMA */ + huart->ErrorCode = HAL_UART_ERROR_DMA; + + return HAL_TIMEOUT; + } + } + } + } + + /* Reset Tx and Rx transfer counters */ + huart->TxXferCount = 0U; + huart->RxXferCount = 0U; + + /* Clear the Error flags in the ICR register */ + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_OREF | UART_CLEAR_NEF | UART_CLEAR_PEF | UART_CLEAR_FEF); + +#if defined(USART_CR1_FIFOEN) + /* Flush the whole TX FIFO (if needed) */ + if (huart->FifoMode == UART_FIFOMODE_ENABLE) + { + __HAL_UART_SEND_REQ(huart, UART_TXDATA_FLUSH_REQUEST); + } +#endif /* USART_CR1_FIFOEN */ + + /* Discard the received data */ + __HAL_UART_SEND_REQ(huart, UART_RXDATA_FLUSH_REQUEST); + + /* Restore huart->gState and huart->RxState to Ready */ + huart->gState = HAL_UART_STATE_READY; + huart->RxState = HAL_UART_STATE_READY; + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + huart->ErrorCode = HAL_UART_ERROR_NONE; + + return HAL_OK; +} + +/** + * @brief Abort ongoing Transmit transfer (blocking mode). + * @param huart UART handle. + * @note This procedure could be used for aborting any ongoing Tx transfer started in Interrupt or DMA mode. + * This procedure performs following operations : + * - Disable UART Interrupts (Tx) + * - Disable the DMA transfer in the peripheral register (if enabled) + * - Abort DMA transfer by calling HAL_DMA_Abort (in case of transfer in DMA mode) + * - Set handle State to READY + * @note This procedure is executed in blocking mode : when exiting function, Abort is considered as completed. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_AbortTransmit(UART_HandleTypeDef *huart) +{ +#if defined(USART_CR1_FIFOEN) + /* Disable TCIE, TXEIE and TXFTIE interrupts */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_TCIE | USART_CR1_TXEIE_TXFNFIE)); + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_TXFTIE); +#else + /* Disable TXEIE and TCIE interrupts */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_TXEIE | USART_CR1_TCIE)); +#endif /* USART_CR1_FIFOEN */ + + /* Abort the UART DMA Tx channel if enabled */ + if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAT)) + { + /* Disable the UART DMA Tx request if enabled */ + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAT); + + /* Abort the UART DMA Tx channel : use blocking DMA Abort API (no callback) */ + if (huart->hdmatx != NULL) + { + /* Set the UART DMA Abort callback to Null. + No call back execution at end of DMA abort procedure */ + huart->hdmatx->XferAbortCallback = NULL; + + if (HAL_DMA_Abort(huart->hdmatx) != HAL_OK) + { + if (HAL_DMA_GetError(huart->hdmatx) == HAL_DMA_ERROR_TIMEOUT) + { + /* Set error code to DMA */ + huart->ErrorCode = HAL_UART_ERROR_DMA; + + return HAL_TIMEOUT; + } + } + } + } + + /* Reset Tx transfer counter */ + huart->TxXferCount = 0U; + +#if defined(USART_CR1_FIFOEN) + /* Flush the whole TX FIFO (if needed) */ + if (huart->FifoMode == UART_FIFOMODE_ENABLE) + { + __HAL_UART_SEND_REQ(huart, UART_TXDATA_FLUSH_REQUEST); + } +#endif /* USART_CR1_FIFOEN */ + + /* Restore huart->gState to Ready */ + huart->gState = HAL_UART_STATE_READY; + + return HAL_OK; +} + +/** + * @brief Abort ongoing Receive transfer (blocking mode). + * @param huart UART handle. + * @note This procedure could be used for aborting any ongoing Rx transfer started in Interrupt or DMA mode. + * This procedure performs following operations : + * - Disable UART Interrupts (Rx) + * - Disable the DMA transfer in the peripheral register (if enabled) + * - Abort DMA transfer by calling HAL_DMA_Abort (in case of transfer in DMA mode) + * - Set handle State to READY + * @note This procedure is executed in blocking mode : when exiting function, Abort is considered as completed. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_AbortReceive(UART_HandleTypeDef *huart) +{ +#if defined(USART_CR1_FIFOEN) + /* Disable PEIE, EIE, RXNEIE and RXFTIE interrupts */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_PEIE | USART_CR1_RXNEIE_RXFNEIE)); + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE | USART_CR3_RXFTIE); +#else + /* Disable RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE | USART_CR1_PEIE)); + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE); +#endif /* USART_CR1_FIFOEN */ + + /* If Reception till IDLE event was ongoing, disable IDLEIE interrupt */ + if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) + { + ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_IDLEIE)); + } + + /* Abort the UART DMA Rx channel if enabled */ + if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR)) + { + /* Disable the UART DMA Rx request if enabled */ + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR); + + /* Abort the UART DMA Rx channel : use blocking DMA Abort API (no callback) */ + if (huart->hdmarx != NULL) + { + /* Set the UART DMA Abort callback to Null. + No call back execution at end of DMA abort procedure */ + huart->hdmarx->XferAbortCallback = NULL; + + if (HAL_DMA_Abort(huart->hdmarx) != HAL_OK) + { + if (HAL_DMA_GetError(huart->hdmarx) == HAL_DMA_ERROR_TIMEOUT) + { + /* Set error code to DMA */ + huart->ErrorCode = HAL_UART_ERROR_DMA; + + return HAL_TIMEOUT; + } + } + } + } + + /* Reset Rx transfer counter */ + huart->RxXferCount = 0U; + + /* Clear the Error flags in the ICR register */ + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_OREF | UART_CLEAR_NEF | UART_CLEAR_PEF | UART_CLEAR_FEF); + + /* Discard the received data */ + __HAL_UART_SEND_REQ(huart, UART_RXDATA_FLUSH_REQUEST); + + /* Restore huart->RxState to Ready */ + huart->RxState = HAL_UART_STATE_READY; + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + return HAL_OK; +} + +/** + * @brief Abort ongoing transfers (Interrupt mode). + * @param huart UART handle. + * @note This procedure could be used for aborting any ongoing transfer started in Interrupt or DMA mode. + * This procedure performs following operations : + * - Disable UART Interrupts (Tx and Rx) + * - Disable the DMA transfer in the peripheral register (if enabled) + * - Abort DMA transfer by calling HAL_DMA_Abort_IT (in case of transfer in DMA mode) + * - Set handle State to READY + * - At abort completion, call user abort complete callback + * @note This procedure is executed in Interrupt mode, meaning that abort procedure could be + * considered as completed only when user abort complete callback is executed (not when exiting function). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_Abort_IT(UART_HandleTypeDef *huart) +{ + uint32_t abortcplt = 1U; + + /* Disable interrupts */ +#if defined(USART_CR1_FIFOEN) + ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_PEIE | USART_CR1_TCIE | USART_CR1_RXNEIE_RXFNEIE | + USART_CR1_TXEIE_TXFNFIE)); + ATOMIC_CLEAR_BIT(huart->Instance->CR3, (USART_CR3_EIE | USART_CR3_RXFTIE | USART_CR3_TXFTIE)); +#else + ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE | USART_CR1_PEIE | USART_CR1_TXEIE | USART_CR1_TCIE)); + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE); +#endif /* USART_CR1_FIFOEN */ + + /* If Reception till IDLE event was ongoing, disable IDLEIE interrupt */ + if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) + { + ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_IDLEIE)); + } + + /* If DMA Tx and/or DMA Rx Handles are associated to UART Handle, DMA Abort complete callbacks should be initialised + before any call to DMA Abort functions */ + /* DMA Tx Handle is valid */ + if (huart->hdmatx != NULL) + { + /* Set DMA Abort Complete callback if UART DMA Tx request if enabled. + Otherwise, set it to NULL */ + if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAT)) + { + huart->hdmatx->XferAbortCallback = UART_DMATxAbortCallback; + } + else + { + huart->hdmatx->XferAbortCallback = NULL; + } + } + /* DMA Rx Handle is valid */ + if (huart->hdmarx != NULL) + { + /* Set DMA Abort Complete callback if UART DMA Rx request if enabled. + Otherwise, set it to NULL */ + if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR)) + { + huart->hdmarx->XferAbortCallback = UART_DMARxAbortCallback; + } + else + { + huart->hdmarx->XferAbortCallback = NULL; + } + } + + /* Abort the UART DMA Tx channel if enabled */ + if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAT)) + { + /* Disable DMA Tx at UART level */ + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAT); + + /* Abort the UART DMA Tx channel : use non blocking DMA Abort API (callback) */ + if (huart->hdmatx != NULL) + { + /* UART Tx DMA Abort callback has already been initialised : + will lead to call HAL_UART_AbortCpltCallback() at end of DMA abort procedure */ + + /* Abort DMA TX */ + if (HAL_DMA_Abort_IT(huart->hdmatx) != HAL_OK) + { + huart->hdmatx->XferAbortCallback = NULL; + } + else + { + abortcplt = 0U; + } + } + } + + /* Abort the UART DMA Rx channel if enabled */ + if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR)) + { + /* Disable the UART DMA Rx request if enabled */ + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR); + + /* Abort the UART DMA Rx channel : use non blocking DMA Abort API (callback) */ + if (huart->hdmarx != NULL) + { + /* UART Rx DMA Abort callback has already been initialised : + will lead to call HAL_UART_AbortCpltCallback() at end of DMA abort procedure */ + + /* Abort DMA RX */ + if (HAL_DMA_Abort_IT(huart->hdmarx) != HAL_OK) + { + huart->hdmarx->XferAbortCallback = NULL; + abortcplt = 1U; + } + else + { + abortcplt = 0U; + } + } + } + + /* if no DMA abort complete callback execution is required => call user Abort Complete callback */ + if (abortcplt == 1U) + { + /* Reset Tx and Rx transfer counters */ + huart->TxXferCount = 0U; + huart->RxXferCount = 0U; + + /* Clear ISR function pointers */ + huart->RxISR = NULL; + huart->TxISR = NULL; + + /* Reset errorCode */ + huart->ErrorCode = HAL_UART_ERROR_NONE; + + /* Clear the Error flags in the ICR register */ + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_OREF | UART_CLEAR_NEF | UART_CLEAR_PEF | UART_CLEAR_FEF); + +#if defined(USART_CR1_FIFOEN) + /* Flush the whole TX FIFO (if needed) */ + if (huart->FifoMode == UART_FIFOMODE_ENABLE) + { + __HAL_UART_SEND_REQ(huart, UART_TXDATA_FLUSH_REQUEST); + } +#endif /* USART_CR1_FIFOEN */ + + /* Discard the received data */ + __HAL_UART_SEND_REQ(huart, UART_RXDATA_FLUSH_REQUEST); + + /* Restore huart->gState and huart->RxState to Ready */ + huart->gState = HAL_UART_STATE_READY; + huart->RxState = HAL_UART_STATE_READY; + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + /* As no DMA to be aborted, call directly user Abort complete callback */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /* Call registered Abort complete callback */ + huart->AbortCpltCallback(huart); +#else + /* Call legacy weak Abort complete callback */ + HAL_UART_AbortCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + } + + return HAL_OK; +} + +/** + * @brief Abort ongoing Transmit transfer (Interrupt mode). + * @param huart UART handle. + * @note This procedure could be used for aborting any ongoing Tx transfer started in Interrupt or DMA mode. + * This procedure performs following operations : + * - Disable UART Interrupts (Tx) + * - Disable the DMA transfer in the peripheral register (if enabled) + * - Abort DMA transfer by calling HAL_DMA_Abort_IT (in case of transfer in DMA mode) + * - Set handle State to READY + * - At abort completion, call user abort complete callback + * @note This procedure is executed in Interrupt mode, meaning that abort procedure could be + * considered as completed only when user abort complete callback is executed (not when exiting function). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_AbortTransmit_IT(UART_HandleTypeDef *huart) +{ + /* Disable interrupts */ +#if defined(USART_CR1_FIFOEN) + ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_TCIE | USART_CR1_TXEIE_TXFNFIE)); + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_TXFTIE); +#else + ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_TXEIE | USART_CR1_TCIE)); +#endif /* USART_CR1_FIFOEN */ + + /* Abort the UART DMA Tx channel if enabled */ + if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAT)) + { + /* Disable the UART DMA Tx request if enabled */ + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAT); + + /* Abort the UART DMA Tx channel : use non blocking DMA Abort API (callback) */ + if (huart->hdmatx != NULL) + { + /* Set the UART DMA Abort callback : + will lead to call HAL_UART_AbortCpltCallback() at end of DMA abort procedure */ + huart->hdmatx->XferAbortCallback = UART_DMATxOnlyAbortCallback; + + /* Abort DMA TX */ + if (HAL_DMA_Abort_IT(huart->hdmatx) != HAL_OK) + { + /* Call Directly huart->hdmatx->XferAbortCallback function in case of error */ + huart->hdmatx->XferAbortCallback(huart->hdmatx); + } + } + else + { + /* Reset Tx transfer counter */ + huart->TxXferCount = 0U; + + /* Clear TxISR function pointers */ + huart->TxISR = NULL; + + /* Restore huart->gState to Ready */ + huart->gState = HAL_UART_STATE_READY; + + /* As no DMA to be aborted, call directly user Abort complete callback */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /* Call registered Abort Transmit Complete Callback */ + huart->AbortTransmitCpltCallback(huart); +#else + /* Call legacy weak Abort Transmit Complete Callback */ + HAL_UART_AbortTransmitCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + } + } + else + { + /* Reset Tx transfer counter */ + huart->TxXferCount = 0U; + + /* Clear TxISR function pointers */ + huart->TxISR = NULL; + +#if defined(USART_CR1_FIFOEN) + /* Flush the whole TX FIFO (if needed) */ + if (huart->FifoMode == UART_FIFOMODE_ENABLE) + { + __HAL_UART_SEND_REQ(huart, UART_TXDATA_FLUSH_REQUEST); + } +#endif /* USART_CR1_FIFOEN */ + + /* Restore huart->gState to Ready */ + huart->gState = HAL_UART_STATE_READY; + + /* As no DMA to be aborted, call directly user Abort complete callback */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /* Call registered Abort Transmit Complete Callback */ + huart->AbortTransmitCpltCallback(huart); +#else + /* Call legacy weak Abort Transmit Complete Callback */ + HAL_UART_AbortTransmitCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + } + + return HAL_OK; +} + +/** + * @brief Abort ongoing Receive transfer (Interrupt mode). + * @param huart UART handle. + * @note This procedure could be used for aborting any ongoing Rx transfer started in Interrupt or DMA mode. + * This procedure performs following operations : + * - Disable UART Interrupts (Rx) + * - Disable the DMA transfer in the peripheral register (if enabled) + * - Abort DMA transfer by calling HAL_DMA_Abort_IT (in case of transfer in DMA mode) + * - Set handle State to READY + * - At abort completion, call user abort complete callback + * @note This procedure is executed in Interrupt mode, meaning that abort procedure could be + * considered as completed only when user abort complete callback is executed (not when exiting function). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_AbortReceive_IT(UART_HandleTypeDef *huart) +{ + /* Disable RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts */ +#if defined(USART_CR1_FIFOEN) + ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_PEIE | USART_CR1_RXNEIE_RXFNEIE)); + ATOMIC_CLEAR_BIT(huart->Instance->CR3, (USART_CR3_EIE | USART_CR3_RXFTIE)); +#else + ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE | USART_CR1_PEIE)); + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE); +#endif /* USART_CR1_FIFOEN */ + + /* If Reception till IDLE event was ongoing, disable IDLEIE interrupt */ + if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) + { + ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_IDLEIE)); + } + + /* Abort the UART DMA Rx channel if enabled */ + if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR)) + { + /* Disable the UART DMA Rx request if enabled */ + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR); + + /* Abort the UART DMA Rx channel : use non blocking DMA Abort API (callback) */ + if (huart->hdmarx != NULL) + { + /* Set the UART DMA Abort callback : + will lead to call HAL_UART_AbortCpltCallback() at end of DMA abort procedure */ + huart->hdmarx->XferAbortCallback = UART_DMARxOnlyAbortCallback; + + /* Abort DMA RX */ + if (HAL_DMA_Abort_IT(huart->hdmarx) != HAL_OK) + { + /* Call Directly huart->hdmarx->XferAbortCallback function in case of error */ + huart->hdmarx->XferAbortCallback(huart->hdmarx); + } + } + else + { + /* Reset Rx transfer counter */ + huart->RxXferCount = 0U; + + /* Clear RxISR function pointer */ + huart->pRxBuffPtr = NULL; + + /* Clear the Error flags in the ICR register */ + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_OREF | UART_CLEAR_NEF | UART_CLEAR_PEF | UART_CLEAR_FEF); + + /* Discard the received data */ + __HAL_UART_SEND_REQ(huart, UART_RXDATA_FLUSH_REQUEST); + + /* Restore huart->RxState to Ready */ + huart->RxState = HAL_UART_STATE_READY; + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + /* As no DMA to be aborted, call directly user Abort complete callback */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /* Call registered Abort Receive Complete Callback */ + huart->AbortReceiveCpltCallback(huart); +#else + /* Call legacy weak Abort Receive Complete Callback */ + HAL_UART_AbortReceiveCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + } + } + else + { + /* Reset Rx transfer counter */ + huart->RxXferCount = 0U; + + /* Clear RxISR function pointer */ + huart->pRxBuffPtr = NULL; + + /* Clear the Error flags in the ICR register */ + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_OREF | UART_CLEAR_NEF | UART_CLEAR_PEF | UART_CLEAR_FEF); + + /* Restore huart->RxState to Ready */ + huart->RxState = HAL_UART_STATE_READY; + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + /* As no DMA to be aborted, call directly user Abort complete callback */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /* Call registered Abort Receive Complete Callback */ + huart->AbortReceiveCpltCallback(huart); +#else + /* Call legacy weak Abort Receive Complete Callback */ + HAL_UART_AbortReceiveCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + } + + return HAL_OK; +} + +/** + * @brief Handle UART interrupt request. + * @param huart UART handle. + * @retval None + */ +void HAL_UART_IRQHandler(UART_HandleTypeDef *huart) +{ + uint32_t isrflags = READ_REG(huart->Instance->ISR); + uint32_t cr1its = READ_REG(huart->Instance->CR1); + uint32_t cr3its = READ_REG(huart->Instance->CR3); + + uint32_t errorflags; + uint32_t errorcode; + + /* If no error occurs */ + errorflags = (isrflags & (uint32_t)(USART_ISR_PE | USART_ISR_FE | USART_ISR_ORE | USART_ISR_NE | USART_ISR_RTOF)); + if (errorflags == 0U) + { + /* UART in mode Receiver ---------------------------------------------------*/ +#if defined(USART_CR1_FIFOEN) + if (((isrflags & USART_ISR_RXNE_RXFNE) != 0U) + && (((cr1its & USART_CR1_RXNEIE_RXFNEIE) != 0U) + || ((cr3its & USART_CR3_RXFTIE) != 0U))) +#else + if (((isrflags & USART_ISR_RXNE) != 0U) + && ((cr1its & USART_CR1_RXNEIE) != 0U)) +#endif /* USART_CR1_FIFOEN */ + { + if (huart->RxISR != NULL) + { + huart->RxISR(huart); + } + return; + } + } + + /* If some errors occur */ +#if defined(USART_CR1_FIFOEN) + if ((errorflags != 0U) + && ((((cr3its & (USART_CR3_RXFTIE | USART_CR3_EIE)) != 0U) + || ((cr1its & (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE | USART_CR1_RTOIE)) != 0U)))) +#else + if ((errorflags != 0U) + && (((cr3its & USART_CR3_EIE) != 0U) + || ((cr1its & (USART_CR1_RXNEIE | USART_CR1_PEIE | USART_CR1_RTOIE)) != 0U))) +#endif /* USART_CR1_FIFOEN */ + { + /* UART parity error interrupt occurred -------------------------------------*/ + if (((isrflags & USART_ISR_PE) != 0U) && ((cr1its & USART_CR1_PEIE) != 0U)) + { + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_PEF); + + huart->ErrorCode |= HAL_UART_ERROR_PE; + } + + /* UART frame error interrupt occurred --------------------------------------*/ + if (((isrflags & USART_ISR_FE) != 0U) && ((cr3its & USART_CR3_EIE) != 0U)) + { + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_FEF); + + huart->ErrorCode |= HAL_UART_ERROR_FE; + } + + /* UART noise error interrupt occurred --------------------------------------*/ + if (((isrflags & USART_ISR_NE) != 0U) && ((cr3its & USART_CR3_EIE) != 0U)) + { + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_NEF); + + huart->ErrorCode |= HAL_UART_ERROR_NE; + } + + /* UART Over-Run interrupt occurred -----------------------------------------*/ +#if defined(USART_CR1_FIFOEN) + if (((isrflags & USART_ISR_ORE) != 0U) + && (((cr1its & USART_CR1_RXNEIE_RXFNEIE) != 0U) || + ((cr3its & (USART_CR3_RXFTIE | USART_CR3_EIE)) != 0U))) +#else + if (((isrflags & USART_ISR_ORE) != 0U) + && (((cr1its & USART_CR1_RXNEIE) != 0U) || + ((cr3its & USART_CR3_EIE) != 0U))) +#endif /* USART_CR1_FIFOEN */ + { + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_OREF); + + huart->ErrorCode |= HAL_UART_ERROR_ORE; + } + + /* UART Receiver Timeout interrupt occurred ---------------------------------*/ + if (((isrflags & USART_ISR_RTOF) != 0U) && ((cr1its & USART_CR1_RTOIE) != 0U)) + { + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_RTOF); + + huart->ErrorCode |= HAL_UART_ERROR_RTO; + } + + /* Call UART Error Call back function if need be ----------------------------*/ + if (huart->ErrorCode != HAL_UART_ERROR_NONE) + { + /* UART in mode Receiver --------------------------------------------------*/ +#if defined(USART_CR1_FIFOEN) + if (((isrflags & USART_ISR_RXNE_RXFNE) != 0U) + && (((cr1its & USART_CR1_RXNEIE_RXFNEIE) != 0U) + || ((cr3its & USART_CR3_RXFTIE) != 0U))) +#else + if (((isrflags & USART_ISR_RXNE) != 0U) + && ((cr1its & USART_CR1_RXNEIE) != 0U)) +#endif /* USART_CR1_FIFOEN */ + { + if (huart->RxISR != NULL) + { + huart->RxISR(huart); + } + } + + /* If Error is to be considered as blocking : + - Receiver Timeout error in Reception + - Overrun error in Reception + - any error occurs in DMA mode reception + */ + errorcode = huart->ErrorCode; + if ((HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR)) || + ((errorcode & (HAL_UART_ERROR_RTO | HAL_UART_ERROR_ORE)) != 0U)) + { + /* Blocking error : transfer is aborted + Set the UART state ready to be able to start again the process, + Disable Rx Interrupts, and disable Rx DMA request, if ongoing */ + UART_EndRxTransfer(huart); + + /* Abort the UART DMA Rx channel if enabled */ + if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR)) + { + /* Disable the UART DMA Rx request if enabled */ + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR); + + /* Abort the UART DMA Rx channel */ + if (huart->hdmarx != NULL) + { + /* Set the UART DMA Abort callback : + will lead to call HAL_UART_ErrorCallback() at end of DMA abort procedure */ + huart->hdmarx->XferAbortCallback = UART_DMAAbortOnError; + + /* Abort DMA RX */ + if (HAL_DMA_Abort_IT(huart->hdmarx) != HAL_OK) + { + /* Call Directly huart->hdmarx->XferAbortCallback function in case of error */ + huart->hdmarx->XferAbortCallback(huart->hdmarx); + } + } + else + { + /* Call user error callback */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered error callback*/ + huart->ErrorCallback(huart); +#else + /*Call legacy weak error callback*/ + HAL_UART_ErrorCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + + } + } + else + { + /* Call user error callback */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered error callback*/ + huart->ErrorCallback(huart); +#else + /*Call legacy weak error callback*/ + HAL_UART_ErrorCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + } + } + else + { + /* Non Blocking error : transfer could go on. + Error is notified to user through user error callback */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered error callback*/ + huart->ErrorCallback(huart); +#else + /*Call legacy weak error callback*/ + HAL_UART_ErrorCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + huart->ErrorCode = HAL_UART_ERROR_NONE; + } + } + return; + + } /* End if some error occurs */ + + /* Check current reception Mode : + If Reception till IDLE event has been selected : */ + if ((huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) + && ((isrflags & USART_ISR_IDLE) != 0U) + && ((cr1its & USART_ISR_IDLE) != 0U)) + { + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_IDLEF); + + /* Check if DMA mode is enabled in UART */ + if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR)) + { + /* DMA mode enabled */ + /* Check received length : If all expected data are received, do nothing, + (DMA cplt callback will be called). + Otherwise, if at least one data has already been received, IDLE event is to be notified to user */ + uint16_t nb_remaining_rx_data = (uint16_t) __HAL_DMA_GET_COUNTER(huart->hdmarx); + if ((nb_remaining_rx_data > 0U) + && (nb_remaining_rx_data < huart->RxXferSize)) + { + /* Reception is not complete */ + huart->RxXferCount = nb_remaining_rx_data; + + /* In Normal mode, end DMA xfer and HAL UART Rx process*/ + if (HAL_IS_BIT_CLR(huart->hdmarx->Instance->CCR, DMA_CCR_CIRC)) + { + /* Disable PE and ERR (Frame error, noise error, overrun error) interrupts */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_PEIE); + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE); + + /* Disable the DMA transfer for the receiver request by resetting the DMAR bit + in the UART CR3 register */ + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR); + + /* At end of Rx process, restore huart->RxState to Ready */ + huart->RxState = HAL_UART_STATE_READY; + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_IDLEIE); + + /* Last bytes received, so no need as the abort is immediate */ + (void)HAL_DMA_Abort(huart->hdmarx); + } + + /* Initialize type of RxEvent that correspond to RxEvent callback execution; + In this case, Rx Event type is Idle Event */ + huart->RxEventType = HAL_UART_RXEVENT_IDLE; + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Rx Event callback*/ + huart->RxEventCallback(huart, (huart->RxXferSize - huart->RxXferCount)); +#else + /*Call legacy weak Rx Event callback*/ + HAL_UARTEx_RxEventCallback(huart, (huart->RxXferSize - huart->RxXferCount)); +#endif /* (USE_HAL_UART_REGISTER_CALLBACKS) */ + } + else + { + /* If DMA is in Circular mode, Idle event is to be reported to user + even if occurring after a Transfer Complete event from DMA */ + if (nb_remaining_rx_data == huart->RxXferSize) + { + if (HAL_IS_BIT_SET(huart->hdmarx->Instance->CCR, DMA_CCR_CIRC)) + { + /* Initialize type of RxEvent that correspond to RxEvent callback execution; + In this case, Rx Event type is Idle Event */ + huart->RxEventType = HAL_UART_RXEVENT_IDLE; + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Rx Event callback*/ + huart->RxEventCallback(huart, huart->RxXferSize); +#else + /*Call legacy weak Rx Event callback*/ + HAL_UARTEx_RxEventCallback(huart, huart->RxXferSize); +#endif /* (USE_HAL_UART_REGISTER_CALLBACKS) */ + } + } + } + return; + } + else + { + /* DMA mode not enabled */ + /* Check received length : If all expected data are received, do nothing. + Otherwise, if at least one data has already been received, IDLE event is to be notified to user */ + uint16_t nb_rx_data = huart->RxXferSize - huart->RxXferCount; + if ((huart->RxXferCount > 0U) + && (nb_rx_data > 0U)) + { +#if defined(USART_CR1_FIFOEN) + /* Disable the UART Parity Error Interrupt and RXNE interrupts */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE)); + + /* Disable the UART Error Interrupt:(Frame error, noise error, overrun error) and RX FIFO Threshold interrupt */ + ATOMIC_CLEAR_BIT(huart->Instance->CR3, (USART_CR3_EIE | USART_CR3_RXFTIE)); +#else + /* Disable the UART Parity Error Interrupt and RXNE interrupts */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE | USART_CR1_PEIE)); + + /* Disable the UART Error Interrupt: (Frame error, noise error, overrun error) */ + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE); +#endif /* USART_CR1_FIFOEN */ + + /* Rx process is completed, restore huart->RxState to Ready */ + huart->RxState = HAL_UART_STATE_READY; + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + /* Clear RxISR function pointer */ + huart->RxISR = NULL; + + ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_IDLEIE); + + /* Initialize type of RxEvent that correspond to RxEvent callback execution; + In this case, Rx Event type is Idle Event */ + huart->RxEventType = HAL_UART_RXEVENT_IDLE; + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Rx complete callback*/ + huart->RxEventCallback(huart, nb_rx_data); +#else + /*Call legacy weak Rx Event callback*/ + HAL_UARTEx_RxEventCallback(huart, nb_rx_data); +#endif /* (USE_HAL_UART_REGISTER_CALLBACKS) */ + } + return; + } + } + + /* UART wakeup from Stop mode interrupt occurred ---------------------------*/ + if (((isrflags & USART_ISR_WUF) != 0U) && ((cr3its & USART_CR3_WUFIE) != 0U)) + { + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_WUF); + + /* UART Rx state is not reset as a reception process might be ongoing. + If UART handle state fields need to be reset to READY, this could be done in Wakeup callback */ + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /* Call registered Wakeup Callback */ + huart->WakeupCallback(huart); +#else + /* Call legacy weak Wakeup Callback */ + HAL_UARTEx_WakeupCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + return; + } + + /* UART in mode Transmitter ------------------------------------------------*/ +#if defined(USART_CR1_FIFOEN) + if (((isrflags & USART_ISR_TXE_TXFNF) != 0U) + && (((cr1its & USART_CR1_TXEIE_TXFNFIE) != 0U) + || ((cr3its & USART_CR3_TXFTIE) != 0U))) +#else + if (((isrflags & USART_ISR_TXE) != 0U) + && ((cr1its & USART_CR1_TXEIE) != 0U)) +#endif /* USART_CR1_FIFOEN */ + { + if (huart->TxISR != NULL) + { + huart->TxISR(huart); + } + return; + } + + /* UART in mode Transmitter (transmission end) -----------------------------*/ + if (((isrflags & USART_ISR_TC) != 0U) && ((cr1its & USART_CR1_TCIE) != 0U)) + { + UART_EndTransmit_IT(huart); + return; + } + +#if defined(USART_CR1_FIFOEN) + /* UART TX Fifo Empty occurred ----------------------------------------------*/ + if (((isrflags & USART_ISR_TXFE) != 0U) && ((cr1its & USART_CR1_TXFEIE) != 0U)) + { +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /* Call registered Tx Fifo Empty Callback */ + huart->TxFifoEmptyCallback(huart); +#else + /* Call legacy weak Tx Fifo Empty Callback */ + HAL_UARTEx_TxFifoEmptyCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + return; + } + + /* UART RX Fifo Full occurred ----------------------------------------------*/ + if (((isrflags & USART_ISR_RXFF) != 0U) && ((cr1its & USART_CR1_RXFFIE) != 0U)) + { +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /* Call registered Rx Fifo Full Callback */ + huart->RxFifoFullCallback(huart); +#else + /* Call legacy weak Rx Fifo Full Callback */ + HAL_UARTEx_RxFifoFullCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + return; + } +#endif /* USART_CR1_FIFOEN */ +} + +/** + * @brief Tx Transfer completed callback. + * @param huart UART handle. + * @retval None + */ +__weak void HAL_UART_TxCpltCallback(UART_HandleTypeDef *huart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(huart); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_UART_TxCpltCallback can be implemented in the user file. + */ +} + +/** + * @brief Tx Half Transfer completed callback. + * @param huart UART handle. + * @retval None + */ +__weak void HAL_UART_TxHalfCpltCallback(UART_HandleTypeDef *huart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(huart); + + /* NOTE: This function should not be modified, when the callback is needed, + the HAL_UART_TxHalfCpltCallback can be implemented in the user file. + */ +} + +/** + * @brief Rx Transfer completed callback. + * @param huart UART handle. + * @retval None + */ +__weak void HAL_UART_RxCpltCallback(UART_HandleTypeDef *huart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(huart); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_UART_RxCpltCallback can be implemented in the user file. + */ +} + +/** + * @brief Rx Half Transfer completed callback. + * @param huart UART handle. + * @retval None + */ +__weak void HAL_UART_RxHalfCpltCallback(UART_HandleTypeDef *huart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(huart); + + /* NOTE: This function should not be modified, when the callback is needed, + the HAL_UART_RxHalfCpltCallback can be implemented in the user file. + */ +} + +/** + * @brief UART error callback. + * @param huart UART handle. + * @retval None + */ +__weak void HAL_UART_ErrorCallback(UART_HandleTypeDef *huart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(huart); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_UART_ErrorCallback can be implemented in the user file. + */ +} + +/** + * @brief UART Abort Complete callback. + * @param huart UART handle. + * @retval None + */ +__weak void HAL_UART_AbortCpltCallback(UART_HandleTypeDef *huart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(huart); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_UART_AbortCpltCallback can be implemented in the user file. + */ +} + +/** + * @brief UART Abort Complete callback. + * @param huart UART handle. + * @retval None + */ +__weak void HAL_UART_AbortTransmitCpltCallback(UART_HandleTypeDef *huart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(huart); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_UART_AbortTransmitCpltCallback can be implemented in the user file. + */ +} + +/** + * @brief UART Abort Receive Complete callback. + * @param huart UART handle. + * @retval None + */ +__weak void HAL_UART_AbortReceiveCpltCallback(UART_HandleTypeDef *huart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(huart); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_UART_AbortReceiveCpltCallback can be implemented in the user file. + */ +} + +/** + * @brief Reception Event Callback (Rx event notification called after use of advanced reception service). + * @param huart UART handle + * @param Size Number of data available in application reception buffer (indicates a position in + * reception buffer until which, data are available) + * @retval None + */ +__weak void HAL_UARTEx_RxEventCallback(UART_HandleTypeDef *huart, uint16_t Size) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(huart); + UNUSED(Size); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_UARTEx_RxEventCallback can be implemented in the user file. + */ +} + +/** + * @} + */ + +/** @defgroup UART_Exported_Functions_Group3 Peripheral Control functions + * @brief UART control functions + * +@verbatim + =============================================================================== + ##### Peripheral Control functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to control the UART. + (+) HAL_UART_ReceiverTimeout_Config() API allows to configure the receiver timeout value on the fly + (+) HAL_UART_EnableReceiverTimeout() API enables the receiver timeout feature + (+) HAL_UART_DisableReceiverTimeout() API disables the receiver timeout feature + (+) HAL_MultiProcessor_EnableMuteMode() API enables mute mode + (+) HAL_MultiProcessor_DisableMuteMode() API disables mute mode + (+) HAL_MultiProcessor_EnterMuteMode() API enters mute mode + (+) UART_SetConfig() API configures the UART peripheral + (+) UART_AdvFeatureConfig() API optionally configures the UART advanced features + (+) UART_CheckIdleState() API ensures that TEACK and/or REACK are set after initialization + (+) HAL_HalfDuplex_EnableTransmitter() API disables receiver and enables transmitter + (+) HAL_HalfDuplex_EnableReceiver() API disables transmitter and enables receiver + (+) HAL_LIN_SendBreak() API transmits the break characters +@endverbatim + * @{ + */ + +/** + * @brief Update on the fly the receiver timeout value in RTOR register. + * @param huart Pointer to a UART_HandleTypeDef structure that contains + * the configuration information for the specified UART module. + * @param TimeoutValue receiver timeout value in number of baud blocks. The timeout + * value must be less or equal to 0x0FFFFFFFF. + * @retval None + */ +void HAL_UART_ReceiverTimeout_Config(UART_HandleTypeDef *huart, uint32_t TimeoutValue) +{ + if (!(IS_LPUART_INSTANCE(huart->Instance))) + { + assert_param(IS_UART_RECEIVER_TIMEOUT_VALUE(TimeoutValue)); + MODIFY_REG(huart->Instance->RTOR, USART_RTOR_RTO, TimeoutValue); + } +} + +/** + * @brief Enable the UART receiver timeout feature. + * @param huart Pointer to a UART_HandleTypeDef structure that contains + * the configuration information for the specified UART module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_EnableReceiverTimeout(UART_HandleTypeDef *huart) +{ + if (!(IS_LPUART_INSTANCE(huart->Instance))) + { + if (huart->gState == HAL_UART_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(huart); + + huart->gState = HAL_UART_STATE_BUSY; + + /* Set the USART RTOEN bit */ + SET_BIT(huart->Instance->CR2, USART_CR2_RTOEN); + + huart->gState = HAL_UART_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(huart); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } + } + else + { + return HAL_ERROR; + } +} + +/** + * @brief Disable the UART receiver timeout feature. + * @param huart Pointer to a UART_HandleTypeDef structure that contains + * the configuration information for the specified UART module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_DisableReceiverTimeout(UART_HandleTypeDef *huart) +{ + if (!(IS_LPUART_INSTANCE(huart->Instance))) + { + if (huart->gState == HAL_UART_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(huart); + + huart->gState = HAL_UART_STATE_BUSY; + + /* Clear the USART RTOEN bit */ + CLEAR_BIT(huart->Instance->CR2, USART_CR2_RTOEN); + + huart->gState = HAL_UART_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(huart); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } + } + else + { + return HAL_ERROR; + } +} + +/** + * @brief Enable UART in mute mode (does not mean UART enters mute mode; + * to enter mute mode, HAL_MultiProcessor_EnterMuteMode() API must be called). + * @param huart UART handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_MultiProcessor_EnableMuteMode(UART_HandleTypeDef *huart) +{ + __HAL_LOCK(huart); + + huart->gState = HAL_UART_STATE_BUSY; + + /* Enable USART mute mode by setting the MME bit in the CR1 register */ + ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_MME); + + huart->gState = HAL_UART_STATE_READY; + + return (UART_CheckIdleState(huart)); +} + +/** + * @brief Disable UART mute mode (does not mean the UART actually exits mute mode + * as it may not have been in mute mode at this very moment). + * @param huart UART handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_MultiProcessor_DisableMuteMode(UART_HandleTypeDef *huart) +{ + __HAL_LOCK(huart); + + huart->gState = HAL_UART_STATE_BUSY; + + /* Disable USART mute mode by clearing the MME bit in the CR1 register */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_MME); + + huart->gState = HAL_UART_STATE_READY; + + return (UART_CheckIdleState(huart)); +} + +/** + * @brief Enter UART mute mode (means UART actually enters mute mode). + * @note To exit from mute mode, HAL_MultiProcessor_DisableMuteMode() API must be called. + * @param huart UART handle. + * @retval None + */ +void HAL_MultiProcessor_EnterMuteMode(UART_HandleTypeDef *huart) +{ + __HAL_UART_SEND_REQ(huart, UART_MUTE_MODE_REQUEST); +} + +/** + * @brief Enable the UART transmitter and disable the UART receiver. + * @param huart UART handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_HalfDuplex_EnableTransmitter(UART_HandleTypeDef *huart) +{ + __HAL_LOCK(huart); + huart->gState = HAL_UART_STATE_BUSY; + + /* Clear TE and RE bits */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_TE | USART_CR1_RE)); + + /* Enable the USART's transmit interface by setting the TE bit in the USART CR1 register */ + ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_TE); + + huart->gState = HAL_UART_STATE_READY; + + __HAL_UNLOCK(huart); + + return HAL_OK; +} + +/** + * @brief Enable the UART receiver and disable the UART transmitter. + * @param huart UART handle. + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_HalfDuplex_EnableReceiver(UART_HandleTypeDef *huart) +{ + __HAL_LOCK(huart); + huart->gState = HAL_UART_STATE_BUSY; + + /* Clear TE and RE bits */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_TE | USART_CR1_RE)); + + /* Enable the USART's receive interface by setting the RE bit in the USART CR1 register */ + ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_RE); + + huart->gState = HAL_UART_STATE_READY; + + __HAL_UNLOCK(huart); + + return HAL_OK; +} + + +/** + * @brief Transmit break characters. + * @param huart UART handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_LIN_SendBreak(UART_HandleTypeDef *huart) +{ + /* Check the parameters */ + assert_param(IS_UART_LIN_INSTANCE(huart->Instance)); + + __HAL_LOCK(huart); + + huart->gState = HAL_UART_STATE_BUSY; + + /* Send break characters */ + __HAL_UART_SEND_REQ(huart, UART_SENDBREAK_REQUEST); + + huart->gState = HAL_UART_STATE_READY; + + __HAL_UNLOCK(huart); + + return HAL_OK; +} + +/** + * @} + */ + +/** @defgroup UART_Exported_Functions_Group4 Peripheral State and Error functions + * @brief UART Peripheral State functions + * +@verbatim + ============================================================================== + ##### Peripheral State and Error functions ##### + ============================================================================== + [..] + This subsection provides functions allowing to : + (+) Return the UART handle state. + (+) Return the UART handle error code + +@endverbatim + * @{ + */ + +/** + * @brief Return the UART handle state. + * @param huart Pointer to a UART_HandleTypeDef structure that contains + * the configuration information for the specified UART. + * @retval HAL state + */ +HAL_UART_StateTypeDef HAL_UART_GetState(const UART_HandleTypeDef *huart) +{ + uint32_t temp1; + uint32_t temp2; + temp1 = huart->gState; + temp2 = huart->RxState; + + return (HAL_UART_StateTypeDef)(temp1 | temp2); +} + +/** + * @brief Return the UART handle error code. + * @param huart Pointer to a UART_HandleTypeDef structure that contains + * the configuration information for the specified UART. + * @retval UART Error Code + */ +uint32_t HAL_UART_GetError(const UART_HandleTypeDef *huart) +{ + return huart->ErrorCode; +} +/** + * @} + */ + +/** + * @} + */ + +/** @defgroup UART_Private_Functions UART Private Functions + * @{ + */ + +/** + * @brief Initialize the callbacks to their default values. + * @param huart UART handle. + * @retval none + */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) +void UART_InitCallbacksToDefault(UART_HandleTypeDef *huart) +{ + /* Init the UART Callback settings */ + huart->TxHalfCpltCallback = HAL_UART_TxHalfCpltCallback; /* Legacy weak TxHalfCpltCallback */ + huart->TxCpltCallback = HAL_UART_TxCpltCallback; /* Legacy weak TxCpltCallback */ + huart->RxHalfCpltCallback = HAL_UART_RxHalfCpltCallback; /* Legacy weak RxHalfCpltCallback */ + huart->RxCpltCallback = HAL_UART_RxCpltCallback; /* Legacy weak RxCpltCallback */ + huart->ErrorCallback = HAL_UART_ErrorCallback; /* Legacy weak ErrorCallback */ + huart->AbortCpltCallback = HAL_UART_AbortCpltCallback; /* Legacy weak AbortCpltCallback */ + huart->AbortTransmitCpltCallback = HAL_UART_AbortTransmitCpltCallback; /* Legacy weak AbortTransmitCpltCallback */ + huart->AbortReceiveCpltCallback = HAL_UART_AbortReceiveCpltCallback; /* Legacy weak AbortReceiveCpltCallback */ + huart->WakeupCallback = HAL_UARTEx_WakeupCallback; /* Legacy weak WakeupCallback */ +#if defined(USART_CR1_FIFOEN) + huart->RxFifoFullCallback = HAL_UARTEx_RxFifoFullCallback; /* Legacy weak RxFifoFullCallback */ + huart->TxFifoEmptyCallback = HAL_UARTEx_TxFifoEmptyCallback; /* Legacy weak TxFifoEmptyCallback */ +#endif /* USART_CR1_FIFOEN */ + huart->RxEventCallback = HAL_UARTEx_RxEventCallback; /* Legacy weak RxEventCallback */ + +} +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + +/** + * @brief Configure the UART peripheral. + * @param huart UART handle. + * @retval HAL status + */ +HAL_StatusTypeDef UART_SetConfig(UART_HandleTypeDef *huart) +{ + uint32_t tmpreg; + uint16_t brrtemp; + UART_ClockSourceTypeDef clocksource; + uint32_t usartdiv; + HAL_StatusTypeDef ret = HAL_OK; +#if defined(USART_PRESC_PRESCALER) + uint32_t lpuart_ker_ck_pres; +#endif /* USART_PRESC_PRESCALER */ + uint32_t pclk; + + /* Check the parameters */ + assert_param(IS_UART_BAUDRATE(huart->Init.BaudRate)); + assert_param(IS_UART_WORD_LENGTH(huart->Init.WordLength)); + if (UART_INSTANCE_LOWPOWER(huart)) + { + assert_param(IS_LPUART_STOPBITS(huart->Init.StopBits)); + } + else + { + assert_param(IS_UART_STOPBITS(huart->Init.StopBits)); + assert_param(IS_UART_ONE_BIT_SAMPLE(huart->Init.OneBitSampling)); + } + + assert_param(IS_UART_PARITY(huart->Init.Parity)); + assert_param(IS_UART_MODE(huart->Init.Mode)); + assert_param(IS_UART_HARDWARE_FLOW_CONTROL(huart->Init.HwFlowCtl)); + assert_param(IS_UART_OVERSAMPLING(huart->Init.OverSampling)); +#if defined(USART_PRESC_PRESCALER) + assert_param(IS_UART_PRESCALER(huart->Init.ClockPrescaler)); +#endif /* USART_PRESC_PRESCALER */ + + /*-------------------------- USART CR1 Configuration -----------------------*/ + /* Clear M, PCE, PS, TE, RE and OVER8 bits and configure + * the UART Word Length, Parity, Mode and oversampling: + * set the M bits according to huart->Init.WordLength value + * set PCE and PS bits according to huart->Init.Parity value + * set TE and RE bits according to huart->Init.Mode value + * set OVER8 bit according to huart->Init.OverSampling value */ + tmpreg = (uint32_t)huart->Init.WordLength | huart->Init.Parity | huart->Init.Mode | huart->Init.OverSampling ; + MODIFY_REG(huart->Instance->CR1, USART_CR1_FIELDS, tmpreg); + + /*-------------------------- USART CR2 Configuration -----------------------*/ + /* Configure the UART Stop Bits: Set STOP[13:12] bits according + * to huart->Init.StopBits value */ + MODIFY_REG(huart->Instance->CR2, USART_CR2_STOP, huart->Init.StopBits); + + /*-------------------------- USART CR3 Configuration -----------------------*/ + /* Configure + * - UART HardWare Flow Control: set CTSE and RTSE bits according + * to huart->Init.HwFlowCtl value + * - one-bit sampling method versus three samples' majority rule according + * to huart->Init.OneBitSampling (not applicable to LPUART) */ + tmpreg = (uint32_t)huart->Init.HwFlowCtl; + + if (!(UART_INSTANCE_LOWPOWER(huart))) + { + tmpreg |= huart->Init.OneBitSampling; + } + MODIFY_REG(huart->Instance->CR3, USART_CR3_FIELDS, tmpreg); + +#if defined(USART_PRESC_PRESCALER) + /*-------------------------- USART PRESC Configuration -----------------------*/ + /* Configure + * - UART Clock Prescaler : set PRESCALER according to huart->Init.ClockPrescaler value */ + MODIFY_REG(huart->Instance->PRESC, USART_PRESC_PRESCALER, huart->Init.ClockPrescaler); +#endif /* USART_PRESC_PRESCALER */ + + /*-------------------------- USART BRR Configuration -----------------------*/ + UART_GETCLOCKSOURCE(huart, clocksource); + + /* Check LPUART instance */ + if (UART_INSTANCE_LOWPOWER(huart)) + { + /* Retrieve frequency clock */ + switch (clocksource) + { + case UART_CLOCKSOURCE_PCLK1: + pclk = HAL_RCC_GetPCLK1Freq(); + break; + case UART_CLOCKSOURCE_HSI: + pclk = (uint32_t) HSI_VALUE; + break; + case UART_CLOCKSOURCE_SYSCLK: + pclk = HAL_RCC_GetSysClockFreq(); + break; + case UART_CLOCKSOURCE_LSE: + pclk = (uint32_t) LSE_VALUE; + break; + default: + pclk = 0U; + ret = HAL_ERROR; + break; + } + + /* If proper clock source reported */ + if (pclk != 0U) + { +#if defined(USART_PRESC_PRESCALER) + /* Compute clock after Prescaler */ + lpuart_ker_ck_pres = (pclk / UARTPrescTable[huart->Init.ClockPrescaler]); + + /* Ensure that Frequency clock is in the range [3 * baudrate, 4096 * baudrate] */ + if ((lpuart_ker_ck_pres < (3U * huart->Init.BaudRate)) || + (lpuart_ker_ck_pres > (4096U * huart->Init.BaudRate))) + { + ret = HAL_ERROR; + } + else + { + /* Check computed UsartDiv value is in allocated range + (it is forbidden to write values lower than 0x300 in the LPUART_BRR register) */ + usartdiv = (uint32_t)(UART_DIV_LPUART(pclk, huart->Init.BaudRate, huart->Init.ClockPrescaler)); + if ((usartdiv >= LPUART_BRR_MIN) && (usartdiv <= LPUART_BRR_MAX)) + { + huart->Instance->BRR = usartdiv; + } + else + { + ret = HAL_ERROR; + } + } /* if ( (lpuart_ker_ck_pres < (3 * huart->Init.BaudRate) ) || + (lpuart_ker_ck_pres > (4096 * huart->Init.BaudRate) )) */ +#else + /* No Prescaler applicable */ + /* Ensure that Frequency clock is in the range [3 * baudrate, 4096 * baudrate] */ + if ((pclk < (3U * huart->Init.BaudRate)) || + (pclk > (4096U * huart->Init.BaudRate))) + { + ret = HAL_ERROR; + } + else + { + usartdiv = (uint32_t)(UART_DIV_LPUART(pclk, huart->Init.BaudRate)); + if ((usartdiv >= LPUART_BRR_MIN) && (usartdiv <= LPUART_BRR_MAX)) + { + huart->Instance->BRR = usartdiv; + } + else + { + ret = HAL_ERROR; + } + } /* if ( (pclk < (3 * huart->Init.BaudRate) ) || (pclk > (4096 * huart->Init.BaudRate) )) */ +#endif /* USART_PRESC_PRESCALER */ + } /* if (pclk != 0) */ + } + /* Check UART Over Sampling to set Baud Rate Register */ + else if (huart->Init.OverSampling == UART_OVERSAMPLING_8) + { + switch (clocksource) + { + case UART_CLOCKSOURCE_PCLK1: + pclk = HAL_RCC_GetPCLK1Freq(); + break; + case UART_CLOCKSOURCE_PCLK2: + pclk = HAL_RCC_GetPCLK2Freq(); + break; + case UART_CLOCKSOURCE_HSI: + pclk = (uint32_t) HSI_VALUE; + break; + case UART_CLOCKSOURCE_SYSCLK: + pclk = HAL_RCC_GetSysClockFreq(); + break; + case UART_CLOCKSOURCE_LSE: + pclk = (uint32_t) LSE_VALUE; + break; + default: + pclk = 0U; + ret = HAL_ERROR; + break; + } + + /* USARTDIV must be greater than or equal to 0d16 */ + if (pclk != 0U) + { +#if defined(USART_PRESC_PRESCALER) + usartdiv = (uint32_t)(UART_DIV_SAMPLING8(pclk, huart->Init.BaudRate, huart->Init.ClockPrescaler)); +#else + usartdiv = (uint32_t)(UART_DIV_SAMPLING8(pclk, huart->Init.BaudRate)); +#endif /* USART_PRESC_PRESCALER */ + if ((usartdiv >= UART_BRR_MIN) && (usartdiv <= UART_BRR_MAX)) + { + brrtemp = (uint16_t)(usartdiv & 0xFFF0U); + brrtemp |= (uint16_t)((usartdiv & (uint16_t)0x000FU) >> 1U); + huart->Instance->BRR = brrtemp; + } + else + { + ret = HAL_ERROR; + } + } + } + else + { + switch (clocksource) + { + case UART_CLOCKSOURCE_PCLK1: + pclk = HAL_RCC_GetPCLK1Freq(); + break; + case UART_CLOCKSOURCE_PCLK2: + pclk = HAL_RCC_GetPCLK2Freq(); + break; + case UART_CLOCKSOURCE_HSI: + pclk = (uint32_t) HSI_VALUE; + break; + case UART_CLOCKSOURCE_SYSCLK: + pclk = HAL_RCC_GetSysClockFreq(); + break; + case UART_CLOCKSOURCE_LSE: + pclk = (uint32_t) LSE_VALUE; + break; + default: + pclk = 0U; + ret = HAL_ERROR; + break; + } + + if (pclk != 0U) + { + /* USARTDIV must be greater than or equal to 0d16 */ +#if defined(USART_PRESC_PRESCALER) + usartdiv = (uint32_t)(UART_DIV_SAMPLING16(pclk, huart->Init.BaudRate, huart->Init.ClockPrescaler)); +#else + usartdiv = (uint32_t)(UART_DIV_SAMPLING16(pclk, huart->Init.BaudRate)); +#endif /* USART_PRESC_PRESCALER */ + if ((usartdiv >= UART_BRR_MIN) && (usartdiv <= UART_BRR_MAX)) + { + huart->Instance->BRR = (uint16_t)usartdiv; + } + else + { + ret = HAL_ERROR; + } + } + } + +#if defined(USART_CR1_FIFOEN) + /* Initialize the number of data to process during RX/TX ISR execution */ + huart->NbTxDataToProcess = 1; + huart->NbRxDataToProcess = 1; +#endif /* USART_CR1_FIFOEN */ + + /* Clear ISR function pointers */ + huart->RxISR = NULL; + huart->TxISR = NULL; + + return ret; +} + +/** + * @brief Configure the UART peripheral advanced features. + * @param huart UART handle. + * @retval None + */ +void UART_AdvFeatureConfig(UART_HandleTypeDef *huart) +{ + /* Check whether the set of advanced features to configure is properly set */ + assert_param(IS_UART_ADVFEATURE_INIT(huart->AdvancedInit.AdvFeatureInit)); + + /* if required, configure RX/TX pins swap */ + if (HAL_IS_BIT_SET(huart->AdvancedInit.AdvFeatureInit, UART_ADVFEATURE_SWAP_INIT)) + { + assert_param(IS_UART_ADVFEATURE_SWAP(huart->AdvancedInit.Swap)); + MODIFY_REG(huart->Instance->CR2, USART_CR2_SWAP, huart->AdvancedInit.Swap); + } + + /* if required, configure TX pin active level inversion */ + if (HAL_IS_BIT_SET(huart->AdvancedInit.AdvFeatureInit, UART_ADVFEATURE_TXINVERT_INIT)) + { + assert_param(IS_UART_ADVFEATURE_TXINV(huart->AdvancedInit.TxPinLevelInvert)); + MODIFY_REG(huart->Instance->CR2, USART_CR2_TXINV, huart->AdvancedInit.TxPinLevelInvert); + } + + /* if required, configure RX pin active level inversion */ + if (HAL_IS_BIT_SET(huart->AdvancedInit.AdvFeatureInit, UART_ADVFEATURE_RXINVERT_INIT)) + { + assert_param(IS_UART_ADVFEATURE_RXINV(huart->AdvancedInit.RxPinLevelInvert)); + MODIFY_REG(huart->Instance->CR2, USART_CR2_RXINV, huart->AdvancedInit.RxPinLevelInvert); + } + + /* if required, configure data inversion */ + if (HAL_IS_BIT_SET(huart->AdvancedInit.AdvFeatureInit, UART_ADVFEATURE_DATAINVERT_INIT)) + { + assert_param(IS_UART_ADVFEATURE_DATAINV(huart->AdvancedInit.DataInvert)); + MODIFY_REG(huart->Instance->CR2, USART_CR2_DATAINV, huart->AdvancedInit.DataInvert); + } + + /* if required, configure RX overrun detection disabling */ + if (HAL_IS_BIT_SET(huart->AdvancedInit.AdvFeatureInit, UART_ADVFEATURE_RXOVERRUNDISABLE_INIT)) + { + assert_param(IS_UART_OVERRUN(huart->AdvancedInit.OverrunDisable)); + MODIFY_REG(huart->Instance->CR3, USART_CR3_OVRDIS, huart->AdvancedInit.OverrunDisable); + } + + /* if required, configure DMA disabling on reception error */ + if (HAL_IS_BIT_SET(huart->AdvancedInit.AdvFeatureInit, UART_ADVFEATURE_DMADISABLEONERROR_INIT)) + { + assert_param(IS_UART_ADVFEATURE_DMAONRXERROR(huart->AdvancedInit.DMADisableonRxError)); + MODIFY_REG(huart->Instance->CR3, USART_CR3_DDRE, huart->AdvancedInit.DMADisableonRxError); + } + + /* if required, configure auto Baud rate detection scheme */ + if (HAL_IS_BIT_SET(huart->AdvancedInit.AdvFeatureInit, UART_ADVFEATURE_AUTOBAUDRATE_INIT)) + { + assert_param(IS_USART_AUTOBAUDRATE_DETECTION_INSTANCE(huart->Instance)); + assert_param(IS_UART_ADVFEATURE_AUTOBAUDRATE(huart->AdvancedInit.AutoBaudRateEnable)); + MODIFY_REG(huart->Instance->CR2, USART_CR2_ABREN, huart->AdvancedInit.AutoBaudRateEnable); + /* set auto Baudrate detection parameters if detection is enabled */ + if (huart->AdvancedInit.AutoBaudRateEnable == UART_ADVFEATURE_AUTOBAUDRATE_ENABLE) + { + assert_param(IS_UART_ADVFEATURE_AUTOBAUDRATEMODE(huart->AdvancedInit.AutoBaudRateMode)); + MODIFY_REG(huart->Instance->CR2, USART_CR2_ABRMODE, huart->AdvancedInit.AutoBaudRateMode); + } + } + + /* if required, configure MSB first on communication line */ + if (HAL_IS_BIT_SET(huart->AdvancedInit.AdvFeatureInit, UART_ADVFEATURE_MSBFIRST_INIT)) + { + assert_param(IS_UART_ADVFEATURE_MSBFIRST(huart->AdvancedInit.MSBFirst)); + MODIFY_REG(huart->Instance->CR2, USART_CR2_MSBFIRST, huart->AdvancedInit.MSBFirst); + } +} + +/** + * @brief Check the UART Idle State. + * @param huart UART handle. + * @retval HAL status + */ +HAL_StatusTypeDef UART_CheckIdleState(UART_HandleTypeDef *huart) +{ + uint32_t tickstart; + + /* Initialize the UART ErrorCode */ + huart->ErrorCode = HAL_UART_ERROR_NONE; + + /* Init tickstart for timeout management */ + tickstart = HAL_GetTick(); + + /* Check if the Transmitter is enabled */ + if ((huart->Instance->CR1 & USART_CR1_TE) == USART_CR1_TE) + { + /* Wait until TEACK flag is set */ + if (UART_WaitOnFlagUntilTimeout(huart, USART_ISR_TEACK, RESET, tickstart, HAL_UART_TIMEOUT_VALUE) != HAL_OK) + { + /* Disable TXE interrupt for the interrupt process */ +#if defined(USART_CR1_FIFOEN) + ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_TXEIE_TXFNFIE)); +#else + ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_TXEIE)); +#endif /* USART_CR1_FIFOEN */ + + huart->gState = HAL_UART_STATE_READY; + + __HAL_UNLOCK(huart); + + /* Timeout occurred */ + return HAL_TIMEOUT; + } + } + + /* Check if the Receiver is enabled */ + if ((huart->Instance->CR1 & USART_CR1_RE) == USART_CR1_RE) + { + /* Wait until REACK flag is set */ + if (UART_WaitOnFlagUntilTimeout(huart, USART_ISR_REACK, RESET, tickstart, HAL_UART_TIMEOUT_VALUE) != HAL_OK) + { + /* Disable RXNE, PE and ERR (Frame error, noise error, overrun error) + interrupts for the interrupt process */ +#if defined(USART_CR1_FIFOEN) + ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE)); +#else + ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE | USART_CR1_PEIE)); +#endif /* USART_CR1_FIFOEN */ + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE); + + huart->RxState = HAL_UART_STATE_READY; + + __HAL_UNLOCK(huart); + + /* Timeout occurred */ + return HAL_TIMEOUT; + } + } + + /* Initialize the UART State */ + huart->gState = HAL_UART_STATE_READY; + huart->RxState = HAL_UART_STATE_READY; + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + huart->RxEventType = HAL_UART_RXEVENT_TC; + + __HAL_UNLOCK(huart); + + return HAL_OK; +} + +/** + * @brief This function handles UART Communication Timeout. It waits + * until a flag is no longer in the specified status. + * @param huart UART handle. + * @param Flag Specifies the UART flag to check + * @param Status The actual Flag status (SET or RESET) + * @param Tickstart Tick start value + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef UART_WaitOnFlagUntilTimeout(UART_HandleTypeDef *huart, uint32_t Flag, FlagStatus Status, + uint32_t Tickstart, uint32_t Timeout) +{ + /* Wait until flag is set */ + while ((__HAL_UART_GET_FLAG(huart, Flag) ? SET : RESET) == Status) + { + /* Check for the Timeout */ + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - Tickstart) > Timeout) || (Timeout == 0U)) + { + + return HAL_TIMEOUT; + } + + if ((READ_BIT(huart->Instance->CR1, USART_CR1_RE) != 0U) && (Flag != UART_FLAG_TXE) && (Flag != UART_FLAG_TC)) + { + if (__HAL_UART_GET_FLAG(huart, UART_FLAG_ORE) == SET) + { + /* Clear Overrun Error flag*/ + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_OREF); + + /* Blocking error : transfer is aborted + Set the UART state ready to be able to start again the process, + Disable Rx Interrupts if ongoing */ + UART_EndRxTransfer(huart); + + huart->ErrorCode = HAL_UART_ERROR_ORE; + + /* Process Unlocked */ + __HAL_UNLOCK(huart); + + return HAL_ERROR; + } + if (__HAL_UART_GET_FLAG(huart, UART_FLAG_RTOF) == SET) + { + /* Clear Receiver Timeout flag*/ + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_RTOF); + + /* Blocking error : transfer is aborted + Set the UART state ready to be able to start again the process, + Disable Rx Interrupts if ongoing */ + UART_EndRxTransfer(huart); + + huart->ErrorCode = HAL_UART_ERROR_RTO; + + /* Process Unlocked */ + __HAL_UNLOCK(huart); + + return HAL_TIMEOUT; + } + } + } + } + return HAL_OK; +} + +/** + * @brief Start Receive operation in interrupt mode. + * @note This function could be called by all HAL UART API providing reception in Interrupt mode. + * @note When calling this function, parameters validity is considered as already checked, + * i.e. Rx State, buffer address, ... + * UART Handle is assumed as Locked. + * @param huart UART handle. + * @param pData Pointer to data buffer (u8 or u16 data elements). + * @param Size Amount of data elements (u8 or u16) to be received. + * @retval HAL status + */ +HAL_StatusTypeDef UART_Start_Receive_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size) +{ + huart->pRxBuffPtr = pData; + huart->RxXferSize = Size; + huart->RxXferCount = Size; + huart->RxISR = NULL; + + /* Computation of UART mask to apply to RDR register */ + UART_MASK_COMPUTATION(huart); + + huart->ErrorCode = HAL_UART_ERROR_NONE; + huart->RxState = HAL_UART_STATE_BUSY_RX; + + /* Enable the UART Error Interrupt: (Frame error, noise error, overrun error) */ + ATOMIC_SET_BIT(huart->Instance->CR3, USART_CR3_EIE); + +#if defined(USART_CR1_FIFOEN) + /* Configure Rx interrupt processing */ + if ((huart->FifoMode == UART_FIFOMODE_ENABLE) && (Size >= huart->NbRxDataToProcess)) + { + /* Set the Rx ISR function pointer according to the data word length */ + if ((huart->Init.WordLength == UART_WORDLENGTH_9B) && (huart->Init.Parity == UART_PARITY_NONE)) + { + huart->RxISR = UART_RxISR_16BIT_FIFOEN; + } + else + { + huart->RxISR = UART_RxISR_8BIT_FIFOEN; + } + + /* Enable the UART Parity Error interrupt and RX FIFO Threshold interrupt */ + if (huart->Init.Parity != UART_PARITY_NONE) + { + ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_PEIE); + } + ATOMIC_SET_BIT(huart->Instance->CR3, USART_CR3_RXFTIE); + } + else + { + /* Set the Rx ISR function pointer according to the data word length */ + if ((huart->Init.WordLength == UART_WORDLENGTH_9B) && (huart->Init.Parity == UART_PARITY_NONE)) + { + huart->RxISR = UART_RxISR_16BIT; + } + else + { + huart->RxISR = UART_RxISR_8BIT; + } + + /* Enable the UART Parity Error interrupt and Data Register Not Empty interrupt */ + if (huart->Init.Parity != UART_PARITY_NONE) + { + ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_PEIE | USART_CR1_RXNEIE_RXFNEIE); + } + else + { + ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_RXNEIE_RXFNEIE); + } + } +#else + /* Set the Rx ISR function pointer according to the data word length */ + if ((huart->Init.WordLength == UART_WORDLENGTH_9B) && (huart->Init.Parity == UART_PARITY_NONE)) + { + huart->RxISR = UART_RxISR_16BIT; + } + else + { + huart->RxISR = UART_RxISR_8BIT; + } + + /* Enable the UART Parity Error interrupt and Data Register Not Empty interrupt */ + if (huart->Init.Parity != UART_PARITY_NONE) + { + ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_PEIE | USART_CR1_RXNEIE); + } + else + { + ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_RXNEIE); + } +#endif /* USART_CR1_FIFOEN */ + return HAL_OK; +} + +/** + * @brief Start Receive operation in DMA mode. + * @note This function could be called by all HAL UART API providing reception in DMA mode. + * @note When calling this function, parameters validity is considered as already checked, + * i.e. Rx State, buffer address, ... + * UART Handle is assumed as Locked. + * @param huart UART handle. + * @param pData Pointer to data buffer (u8 or u16 data elements). + * @param Size Amount of data elements (u8 or u16) to be received. + * @retval HAL status + */ +HAL_StatusTypeDef UART_Start_Receive_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size) +{ + huart->pRxBuffPtr = pData; + huart->RxXferSize = Size; + + huart->ErrorCode = HAL_UART_ERROR_NONE; + huart->RxState = HAL_UART_STATE_BUSY_RX; + + if (huart->hdmarx != NULL) + { + /* Set the UART DMA transfer complete callback */ + huart->hdmarx->XferCpltCallback = UART_DMAReceiveCplt; + + /* Set the UART DMA Half transfer complete callback */ + huart->hdmarx->XferHalfCpltCallback = UART_DMARxHalfCplt; + + /* Set the DMA error callback */ + huart->hdmarx->XferErrorCallback = UART_DMAError; + + /* Set the DMA abort callback */ + huart->hdmarx->XferAbortCallback = NULL; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(huart->hdmarx, (uint32_t)&huart->Instance->RDR, (uint32_t)huart->pRxBuffPtr, Size) != HAL_OK) + { + /* Set error code to DMA */ + huart->ErrorCode = HAL_UART_ERROR_DMA; + + /* Restore huart->RxState to ready */ + huart->RxState = HAL_UART_STATE_READY; + + return HAL_ERROR; + } + } + + /* Enable the UART Parity Error Interrupt */ + if (huart->Init.Parity != UART_PARITY_NONE) + { + ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_PEIE); + } + + /* Enable the UART Error Interrupt: (Frame error, noise error, overrun error) */ + ATOMIC_SET_BIT(huart->Instance->CR3, USART_CR3_EIE); + + /* Enable the DMA transfer for the receiver request by setting the DMAR bit + in the UART CR3 register */ + ATOMIC_SET_BIT(huart->Instance->CR3, USART_CR3_DMAR); + + return HAL_OK; +} + + +/** + * @brief End ongoing Tx transfer on UART peripheral (following error detection or Transmit completion). + * @param huart UART handle. + * @retval None + */ +static void UART_EndTxTransfer(UART_HandleTypeDef *huart) +{ +#if defined(USART_CR1_FIFOEN) + /* Disable TXEIE, TCIE, TXFT interrupts */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_TXEIE_TXFNFIE | USART_CR1_TCIE)); + ATOMIC_CLEAR_BIT(huart->Instance->CR3, (USART_CR3_TXFTIE)); +#else + /* Disable TXEIE and TCIE interrupts */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_TXEIE | USART_CR1_TCIE)); +#endif /* USART_CR1_FIFOEN */ + + /* At end of Tx process, restore huart->gState to Ready */ + huart->gState = HAL_UART_STATE_READY; +} + + +/** + * @brief End ongoing Rx transfer on UART peripheral (following error detection or Reception completion). + * @param huart UART handle. + * @retval None + */ +static void UART_EndRxTransfer(UART_HandleTypeDef *huart) +{ + /* Disable RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts */ +#if defined(USART_CR1_FIFOEN) + ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE)); + ATOMIC_CLEAR_BIT(huart->Instance->CR3, (USART_CR3_EIE | USART_CR3_RXFTIE)); +#else + ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE | USART_CR1_PEIE)); + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE); +#endif /* USART_CR1_FIFOEN */ + + /* In case of reception waiting for IDLE event, disable also the IDLE IE interrupt source */ + if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) + { + ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_IDLEIE); + } + + /* At end of Rx process, restore huart->RxState to Ready */ + huart->RxState = HAL_UART_STATE_READY; + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + /* Reset RxIsr function pointer */ + huart->RxISR = NULL; +} + + +/** + * @brief DMA UART transmit process complete callback. + * @param hdma DMA handle. + * @retval None + */ +static void UART_DMATransmitCplt(DMA_HandleTypeDef *hdma) +{ + UART_HandleTypeDef *huart = (UART_HandleTypeDef *)(hdma->Parent); + + /* DMA Normal mode */ + if (HAL_IS_BIT_CLR(hdma->Instance->CCR, DMA_CCR_CIRC)) + { + huart->TxXferCount = 0U; + + /* Disable the DMA transfer for transmit request by resetting the DMAT bit + in the UART CR3 register */ + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAT); + + /* Enable the UART Transmit Complete Interrupt */ + ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_TCIE); + } + /* DMA Circular mode */ + else + { +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Tx complete callback*/ + huart->TxCpltCallback(huart); +#else + /*Call legacy weak Tx complete callback*/ + HAL_UART_TxCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + } +} + +/** + * @brief DMA UART transmit process half complete callback. + * @param hdma DMA handle. + * @retval None + */ +static void UART_DMATxHalfCplt(DMA_HandleTypeDef *hdma) +{ + UART_HandleTypeDef *huart = (UART_HandleTypeDef *)(hdma->Parent); + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Tx Half complete callback*/ + huart->TxHalfCpltCallback(huart); +#else + /*Call legacy weak Tx Half complete callback*/ + HAL_UART_TxHalfCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ +} + +/** + * @brief DMA UART receive process complete callback. + * @param hdma DMA handle. + * @retval None + */ +static void UART_DMAReceiveCplt(DMA_HandleTypeDef *hdma) +{ + UART_HandleTypeDef *huart = (UART_HandleTypeDef *)(hdma->Parent); + + /* DMA Normal mode */ + if (HAL_IS_BIT_CLR(hdma->Instance->CCR, DMA_CCR_CIRC)) + { + huart->RxXferCount = 0U; + + /* Disable PE and ERR (Frame error, noise error, overrun error) interrupts */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_PEIE); + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE); + + /* Disable the DMA transfer for the receiver request by resetting the DMAR bit + in the UART CR3 register */ + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR); + + /* At end of Rx process, restore huart->RxState to Ready */ + huart->RxState = HAL_UART_STATE_READY; + + /* If Reception till IDLE event has been selected, Disable IDLE Interrupt */ + if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) + { + ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_IDLEIE); + } + } + + /* Initialize type of RxEvent that correspond to RxEvent callback execution; + In this case, Rx Event type is Transfer Complete */ + huart->RxEventType = HAL_UART_RXEVENT_TC; + + /* Check current reception Mode : + If Reception till IDLE event has been selected : use Rx Event callback */ + if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) + { +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Rx Event callback*/ + huart->RxEventCallback(huart, huart->RxXferSize); +#else + /*Call legacy weak Rx Event callback*/ + HAL_UARTEx_RxEventCallback(huart, huart->RxXferSize); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + } + else + { + /* In other cases : use Rx Complete callback */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Rx complete callback*/ + huart->RxCpltCallback(huart); +#else + /*Call legacy weak Rx complete callback*/ + HAL_UART_RxCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + } +} + +/** + * @brief DMA UART receive process half complete callback. + * @param hdma DMA handle. + * @retval None + */ +static void UART_DMARxHalfCplt(DMA_HandleTypeDef *hdma) +{ + UART_HandleTypeDef *huart = (UART_HandleTypeDef *)(hdma->Parent); + + /* Initialize type of RxEvent that correspond to RxEvent callback execution; + In this case, Rx Event type is Half Transfer */ + huart->RxEventType = HAL_UART_RXEVENT_HT; + + /* Check current reception Mode : + If Reception till IDLE event has been selected : use Rx Event callback */ + if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) + { +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Rx Event callback*/ + huart->RxEventCallback(huart, huart->RxXferSize / 2U); +#else + /*Call legacy weak Rx Event callback*/ + HAL_UARTEx_RxEventCallback(huart, huart->RxXferSize / 2U); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + } + else + { + /* In other cases : use Rx Half Complete callback */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Rx Half complete callback*/ + huart->RxHalfCpltCallback(huart); +#else + /*Call legacy weak Rx Half complete callback*/ + HAL_UART_RxHalfCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + } +} + +/** + * @brief DMA UART communication error callback. + * @param hdma DMA handle. + * @retval None + */ +static void UART_DMAError(DMA_HandleTypeDef *hdma) +{ + UART_HandleTypeDef *huart = (UART_HandleTypeDef *)(hdma->Parent); + + const HAL_UART_StateTypeDef gstate = huart->gState; + const HAL_UART_StateTypeDef rxstate = huart->RxState; + + /* Stop UART DMA Tx request if ongoing */ + if ((HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAT)) && + (gstate == HAL_UART_STATE_BUSY_TX)) + { + huart->TxXferCount = 0U; + UART_EndTxTransfer(huart); + } + + /* Stop UART DMA Rx request if ongoing */ + if ((HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR)) && + (rxstate == HAL_UART_STATE_BUSY_RX)) + { + huart->RxXferCount = 0U; + UART_EndRxTransfer(huart); + } + + huart->ErrorCode |= HAL_UART_ERROR_DMA; + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered error callback*/ + huart->ErrorCallback(huart); +#else + /*Call legacy weak error callback*/ + HAL_UART_ErrorCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ +} + +/** + * @brief DMA UART communication abort callback, when initiated by HAL services on Error + * (To be called at end of DMA Abort procedure following error occurrence). + * @param hdma DMA handle. + * @retval None + */ +static void UART_DMAAbortOnError(DMA_HandleTypeDef *hdma) +{ + UART_HandleTypeDef *huart = (UART_HandleTypeDef *)(hdma->Parent); + huart->RxXferCount = 0U; + huart->TxXferCount = 0U; + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered error callback*/ + huart->ErrorCallback(huart); +#else + /*Call legacy weak error callback*/ + HAL_UART_ErrorCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ +} + +/** + * @brief DMA UART Tx communication abort callback, when initiated by user + * (To be called at end of DMA Tx Abort procedure following user abort request). + * @note When this callback is executed, User Abort complete call back is called only if no + * Abort still ongoing for Rx DMA Handle. + * @param hdma DMA handle. + * @retval None + */ +static void UART_DMATxAbortCallback(DMA_HandleTypeDef *hdma) +{ + UART_HandleTypeDef *huart = (UART_HandleTypeDef *)(hdma->Parent); + + huart->hdmatx->XferAbortCallback = NULL; + + /* Check if an Abort process is still ongoing */ + if (huart->hdmarx != NULL) + { + if (huart->hdmarx->XferAbortCallback != NULL) + { + return; + } + } + + /* No Abort process still ongoing : All DMA channels are aborted, call user Abort Complete callback */ + huart->TxXferCount = 0U; + huart->RxXferCount = 0U; + + /* Reset errorCode */ + huart->ErrorCode = HAL_UART_ERROR_NONE; + + /* Clear the Error flags in the ICR register */ + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_OREF | UART_CLEAR_NEF | UART_CLEAR_PEF | UART_CLEAR_FEF); + +#if defined(USART_CR1_FIFOEN) + /* Flush the whole TX FIFO (if needed) */ + if (huart->FifoMode == UART_FIFOMODE_ENABLE) + { + __HAL_UART_SEND_REQ(huart, UART_TXDATA_FLUSH_REQUEST); + } +#endif /* USART_CR1_FIFOEN */ + + /* Restore huart->gState and huart->RxState to Ready */ + huart->gState = HAL_UART_STATE_READY; + huart->RxState = HAL_UART_STATE_READY; + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + /* Call user Abort complete callback */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /* Call registered Abort complete callback */ + huart->AbortCpltCallback(huart); +#else + /* Call legacy weak Abort complete callback */ + HAL_UART_AbortCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ +} + + +/** + * @brief DMA UART Rx communication abort callback, when initiated by user + * (To be called at end of DMA Rx Abort procedure following user abort request). + * @note When this callback is executed, User Abort complete call back is called only if no + * Abort still ongoing for Tx DMA Handle. + * @param hdma DMA handle. + * @retval None + */ +static void UART_DMARxAbortCallback(DMA_HandleTypeDef *hdma) +{ + UART_HandleTypeDef *huart = (UART_HandleTypeDef *)(hdma->Parent); + + huart->hdmarx->XferAbortCallback = NULL; + + /* Check if an Abort process is still ongoing */ + if (huart->hdmatx != NULL) + { + if (huart->hdmatx->XferAbortCallback != NULL) + { + return; + } + } + + /* No Abort process still ongoing : All DMA channels are aborted, call user Abort Complete callback */ + huart->TxXferCount = 0U; + huart->RxXferCount = 0U; + + /* Reset errorCode */ + huart->ErrorCode = HAL_UART_ERROR_NONE; + + /* Clear the Error flags in the ICR register */ + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_OREF | UART_CLEAR_NEF | UART_CLEAR_PEF | UART_CLEAR_FEF); + + /* Discard the received data */ + __HAL_UART_SEND_REQ(huart, UART_RXDATA_FLUSH_REQUEST); + + /* Restore huart->gState and huart->RxState to Ready */ + huart->gState = HAL_UART_STATE_READY; + huart->RxState = HAL_UART_STATE_READY; + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + /* Call user Abort complete callback */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /* Call registered Abort complete callback */ + huart->AbortCpltCallback(huart); +#else + /* Call legacy weak Abort complete callback */ + HAL_UART_AbortCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ +} + + +/** + * @brief DMA UART Tx communication abort callback, when initiated by user by a call to + * HAL_UART_AbortTransmit_IT API (Abort only Tx transfer) + * (This callback is executed at end of DMA Tx Abort procedure following user abort request, + * and leads to user Tx Abort Complete callback execution). + * @param hdma DMA handle. + * @retval None + */ +static void UART_DMATxOnlyAbortCallback(DMA_HandleTypeDef *hdma) +{ + UART_HandleTypeDef *huart = (UART_HandleTypeDef *)(hdma->Parent); + + huart->TxXferCount = 0U; + +#if defined(USART_CR1_FIFOEN) + /* Flush the whole TX FIFO (if needed) */ + if (huart->FifoMode == UART_FIFOMODE_ENABLE) + { + __HAL_UART_SEND_REQ(huart, UART_TXDATA_FLUSH_REQUEST); + } +#endif /* USART_CR1_FIFOEN */ + + /* Restore huart->gState to Ready */ + huart->gState = HAL_UART_STATE_READY; + + /* Call user Abort complete callback */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /* Call registered Abort Transmit Complete Callback */ + huart->AbortTransmitCpltCallback(huart); +#else + /* Call legacy weak Abort Transmit Complete Callback */ + HAL_UART_AbortTransmitCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ +} + +/** + * @brief DMA UART Rx communication abort callback, when initiated by user by a call to + * HAL_UART_AbortReceive_IT API (Abort only Rx transfer) + * (This callback is executed at end of DMA Rx Abort procedure following user abort request, + * and leads to user Rx Abort Complete callback execution). + * @param hdma DMA handle. + * @retval None + */ +static void UART_DMARxOnlyAbortCallback(DMA_HandleTypeDef *hdma) +{ + UART_HandleTypeDef *huart = (UART_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + huart->RxXferCount = 0U; + + /* Clear the Error flags in the ICR register */ + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_OREF | UART_CLEAR_NEF | UART_CLEAR_PEF | UART_CLEAR_FEF); + + /* Discard the received data */ + __HAL_UART_SEND_REQ(huart, UART_RXDATA_FLUSH_REQUEST); + + /* Restore huart->RxState to Ready */ + huart->RxState = HAL_UART_STATE_READY; + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + /* Call user Abort complete callback */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /* Call registered Abort Receive Complete Callback */ + huart->AbortReceiveCpltCallback(huart); +#else + /* Call legacy weak Abort Receive Complete Callback */ + HAL_UART_AbortReceiveCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ +} + +/** + * @brief TX interrupt handler for 7 or 8 bits data word length . + * @note Function is called under interruption only, once + * interruptions have been enabled by HAL_UART_Transmit_IT(). + * @param huart UART handle. + * @retval None + */ +static void UART_TxISR_8BIT(UART_HandleTypeDef *huart) +{ + /* Check that a Tx process is ongoing */ + if (huart->gState == HAL_UART_STATE_BUSY_TX) + { + if (huart->TxXferCount == 0U) + { + /* Disable the UART Transmit Data Register Empty Interrupt */ +#if defined(USART_CR1_FIFOEN) + ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_TXEIE_TXFNFIE); +#else + ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_TXEIE); +#endif /* USART_CR1_FIFOEN */ + + /* Enable the UART Transmit Complete Interrupt */ + ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_TCIE); + } + else + { + huart->Instance->TDR = (uint8_t)(*huart->pTxBuffPtr & (uint8_t)0xFF); + huart->pTxBuffPtr++; + huart->TxXferCount--; + } + } +} + +/** + * @brief TX interrupt handler for 9 bits data word length. + * @note Function is called under interruption only, once + * interruptions have been enabled by HAL_UART_Transmit_IT(). + * @param huart UART handle. + * @retval None + */ +static void UART_TxISR_16BIT(UART_HandleTypeDef *huart) +{ + const uint16_t *tmp; + + /* Check that a Tx process is ongoing */ + if (huart->gState == HAL_UART_STATE_BUSY_TX) + { + if (huart->TxXferCount == 0U) + { + /* Disable the UART Transmit Data Register Empty Interrupt */ +#if defined(USART_CR1_FIFOEN) + ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_TXEIE_TXFNFIE); +#else + ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_TXEIE); +#endif /* USART_CR1_FIFOEN */ + + /* Enable the UART Transmit Complete Interrupt */ + ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_TCIE); + } + else + { + tmp = (const uint16_t *) huart->pTxBuffPtr; + huart->Instance->TDR = (((uint32_t)(*tmp)) & 0x01FFUL); + huart->pTxBuffPtr += 2U; + huart->TxXferCount--; + } + } +} + +#if defined(USART_CR1_FIFOEN) +/** + * @brief TX interrupt handler for 7 or 8 bits data word length and FIFO mode is enabled. + * @note Function is called under interruption only, once + * interruptions have been enabled by HAL_UART_Transmit_IT(). + * @param huart UART handle. + * @retval None + */ +static void UART_TxISR_8BIT_FIFOEN(UART_HandleTypeDef *huart) +{ + uint16_t nb_tx_data; + + /* Check that a Tx process is ongoing */ + if (huart->gState == HAL_UART_STATE_BUSY_TX) + { + for (nb_tx_data = huart->NbTxDataToProcess ; nb_tx_data > 0U ; nb_tx_data--) + { + if (huart->TxXferCount == 0U) + { + /* Disable the TX FIFO threshold interrupt */ + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_TXFTIE); + + /* Enable the UART Transmit Complete Interrupt */ + ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_TCIE); + + break; /* force exit loop */ + } + else if (READ_BIT(huart->Instance->ISR, USART_ISR_TXE_TXFNF) != 0U) + { + huart->Instance->TDR = (uint8_t)(*huart->pTxBuffPtr & (uint8_t)0xFF); + huart->pTxBuffPtr++; + huart->TxXferCount--; + } + else + { + /* Nothing to do */ + } + } + } +} + +/** + * @brief TX interrupt handler for 9 bits data word length and FIFO mode is enabled. + * @note Function is called under interruption only, once + * interruptions have been enabled by HAL_UART_Transmit_IT(). + * @param huart UART handle. + * @retval None + */ +static void UART_TxISR_16BIT_FIFOEN(UART_HandleTypeDef *huart) +{ + const uint16_t *tmp; + uint16_t nb_tx_data; + + /* Check that a Tx process is ongoing */ + if (huart->gState == HAL_UART_STATE_BUSY_TX) + { + for (nb_tx_data = huart->NbTxDataToProcess ; nb_tx_data > 0U ; nb_tx_data--) + { + if (huart->TxXferCount == 0U) + { + /* Disable the TX FIFO threshold interrupt */ + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_TXFTIE); + + /* Enable the UART Transmit Complete Interrupt */ + ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_TCIE); + + break; /* force exit loop */ + } + else if (READ_BIT(huart->Instance->ISR, USART_ISR_TXE_TXFNF) != 0U) + { + tmp = (const uint16_t *) huart->pTxBuffPtr; + huart->Instance->TDR = (((uint32_t)(*tmp)) & 0x01FFUL); + huart->pTxBuffPtr += 2U; + huart->TxXferCount--; + } + else + { + /* Nothing to do */ + } + } + } +} +#endif /* USART_CR1_FIFOEN */ + +/** + * @brief Wrap up transmission in non-blocking mode. + * @param huart pointer to a UART_HandleTypeDef structure that contains + * the configuration information for the specified UART module. + * @retval None + */ +static void UART_EndTransmit_IT(UART_HandleTypeDef *huart) +{ + /* Disable the UART Transmit Complete Interrupt */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_TCIE); + + /* Tx process is ended, restore huart->gState to Ready */ + huart->gState = HAL_UART_STATE_READY; + + /* Cleat TxISR function pointer */ + huart->TxISR = NULL; + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Tx complete callback*/ + huart->TxCpltCallback(huart); +#else + /*Call legacy weak Tx complete callback*/ + HAL_UART_TxCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ +} + +/** + * @brief RX interrupt handler for 7 or 8 bits data word length . + * @param huart UART handle. + * @retval None + */ +static void UART_RxISR_8BIT(UART_HandleTypeDef *huart) +{ + uint16_t uhMask = huart->Mask; + uint16_t uhdata; + + /* Check that a Rx process is ongoing */ + if (huart->RxState == HAL_UART_STATE_BUSY_RX) + { + uhdata = (uint16_t) READ_REG(huart->Instance->RDR); + *huart->pRxBuffPtr = (uint8_t)(uhdata & (uint8_t)uhMask); + huart->pRxBuffPtr++; + huart->RxXferCount--; + + if (huart->RxXferCount == 0U) + { + /* Disable the UART Parity Error Interrupt and RXNE interrupts */ +#if defined(USART_CR1_FIFOEN) + ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE)); +#else + ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE | USART_CR1_PEIE)); +#endif /* USART_CR1_FIFOEN */ + + /* Disable the UART Error Interrupt: (Frame error, noise error, overrun error) */ + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE); + + /* Rx process is completed, restore huart->RxState to Ready */ + huart->RxState = HAL_UART_STATE_READY; + + /* Clear RxISR function pointer */ + huart->RxISR = NULL; + + /* Initialize type of RxEvent to Transfer Complete */ + huart->RxEventType = HAL_UART_RXEVENT_TC; + + if (!(IS_LPUART_INSTANCE(huart->Instance))) + { + /* Check that USART RTOEN bit is set */ + if (READ_BIT(huart->Instance->CR2, USART_CR2_RTOEN) != 0U) + { + /* Enable the UART Receiver Timeout Interrupt */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_RTOIE); + } + } + + /* Check current reception Mode : + If Reception till IDLE event has been selected : */ + if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) + { + /* Set reception type to Standard */ + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + /* Disable IDLE interrupt */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_IDLEIE); + + if (__HAL_UART_GET_FLAG(huart, UART_FLAG_IDLE) == SET) + { + /* Clear IDLE Flag */ + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_IDLEF); + } + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Rx Event callback*/ + huart->RxEventCallback(huart, huart->RxXferSize); +#else + /*Call legacy weak Rx Event callback*/ + HAL_UARTEx_RxEventCallback(huart, huart->RxXferSize); +#endif /* (USE_HAL_UART_REGISTER_CALLBACKS) */ + } + else + { + /* Standard reception API called */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Rx complete callback*/ + huart->RxCpltCallback(huart); +#else + /*Call legacy weak Rx complete callback*/ + HAL_UART_RxCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + } + } + } + else + { + /* Clear RXNE interrupt flag */ + __HAL_UART_SEND_REQ(huart, UART_RXDATA_FLUSH_REQUEST); + } +} + +/** + * @brief RX interrupt handler for 9 bits data word length . + * @note Function is called under interruption only, once + * interruptions have been enabled by HAL_UART_Receive_IT() + * @param huart UART handle. + * @retval None + */ +static void UART_RxISR_16BIT(UART_HandleTypeDef *huart) +{ + uint16_t *tmp; + uint16_t uhMask = huart->Mask; + uint16_t uhdata; + + /* Check that a Rx process is ongoing */ + if (huart->RxState == HAL_UART_STATE_BUSY_RX) + { + uhdata = (uint16_t) READ_REG(huart->Instance->RDR); + tmp = (uint16_t *) huart->pRxBuffPtr ; + *tmp = (uint16_t)(uhdata & uhMask); + huart->pRxBuffPtr += 2U; + huart->RxXferCount--; + + if (huart->RxXferCount == 0U) + { + /* Disable the UART Parity Error Interrupt and RXNE interrupt*/ +#if defined(USART_CR1_FIFOEN) + ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE)); +#else + ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE | USART_CR1_PEIE)); +#endif /* USART_CR1_FIFOEN */ + + /* Disable the UART Error Interrupt: (Frame error, noise error, overrun error) */ + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE); + + /* Rx process is completed, restore huart->RxState to Ready */ + huart->RxState = HAL_UART_STATE_READY; + + /* Clear RxISR function pointer */ + huart->RxISR = NULL; + + /* Initialize type of RxEvent to Transfer Complete */ + huart->RxEventType = HAL_UART_RXEVENT_TC; + + if (!(IS_LPUART_INSTANCE(huart->Instance))) + { + /* Check that USART RTOEN bit is set */ + if (READ_BIT(huart->Instance->CR2, USART_CR2_RTOEN) != 0U) + { + /* Enable the UART Receiver Timeout Interrupt */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_RTOIE); + } + } + + /* Check current reception Mode : + If Reception till IDLE event has been selected : */ + if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) + { + /* Set reception type to Standard */ + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + /* Disable IDLE interrupt */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_IDLEIE); + + if (__HAL_UART_GET_FLAG(huart, UART_FLAG_IDLE) == SET) + { + /* Clear IDLE Flag */ + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_IDLEF); + } + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Rx Event callback*/ + huart->RxEventCallback(huart, huart->RxXferSize); +#else + /*Call legacy weak Rx Event callback*/ + HAL_UARTEx_RxEventCallback(huart, huart->RxXferSize); +#endif /* (USE_HAL_UART_REGISTER_CALLBACKS) */ + } + else + { + /* Standard reception API called */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Rx complete callback*/ + huart->RxCpltCallback(huart); +#else + /*Call legacy weak Rx complete callback*/ + HAL_UART_RxCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + } + } + } + else + { + /* Clear RXNE interrupt flag */ + __HAL_UART_SEND_REQ(huart, UART_RXDATA_FLUSH_REQUEST); + } +} + +#if defined(USART_CR1_FIFOEN) +/** + * @brief RX interrupt handler for 7 or 8 bits data word length and FIFO mode is enabled. + * @note Function is called under interruption only, once + * interruptions have been enabled by HAL_UART_Receive_IT() + * @param huart UART handle. + * @retval None + */ +static void UART_RxISR_8BIT_FIFOEN(UART_HandleTypeDef *huart) +{ + uint16_t uhMask = huart->Mask; + uint16_t uhdata; + uint16_t nb_rx_data; + uint16_t rxdatacount; + uint32_t isrflags = READ_REG(huart->Instance->ISR); + uint32_t cr1its = READ_REG(huart->Instance->CR1); + uint32_t cr3its = READ_REG(huart->Instance->CR3); + + /* Check that a Rx process is ongoing */ + if (huart->RxState == HAL_UART_STATE_BUSY_RX) + { + nb_rx_data = huart->NbRxDataToProcess; + while ((nb_rx_data > 0U) && ((isrflags & USART_ISR_RXNE_RXFNE) != 0U)) + { + uhdata = (uint16_t) READ_REG(huart->Instance->RDR); + *huart->pRxBuffPtr = (uint8_t)(uhdata & (uint8_t)uhMask); + huart->pRxBuffPtr++; + huart->RxXferCount--; + isrflags = READ_REG(huart->Instance->ISR); + + /* If some non blocking errors occurred */ + if ((isrflags & (USART_ISR_PE | USART_ISR_FE | USART_ISR_NE)) != 0U) + { + /* UART parity error interrupt occurred -------------------------------------*/ + if (((isrflags & USART_ISR_PE) != 0U) && ((cr1its & USART_CR1_PEIE) != 0U)) + { + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_PEF); + + huart->ErrorCode |= HAL_UART_ERROR_PE; + } + + /* UART frame error interrupt occurred --------------------------------------*/ + if (((isrflags & USART_ISR_FE) != 0U) && ((cr3its & USART_CR3_EIE) != 0U)) + { + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_FEF); + + huart->ErrorCode |= HAL_UART_ERROR_FE; + } + + /* UART noise error interrupt occurred --------------------------------------*/ + if (((isrflags & USART_ISR_NE) != 0U) && ((cr3its & USART_CR3_EIE) != 0U)) + { + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_NEF); + + huart->ErrorCode |= HAL_UART_ERROR_NE; + } + + /* Call UART Error Call back function if need be ----------------------------*/ + if (huart->ErrorCode != HAL_UART_ERROR_NONE) + { + /* Non Blocking error : transfer could go on. + Error is notified to user through user error callback */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered error callback*/ + huart->ErrorCallback(huart); +#else + /*Call legacy weak error callback*/ + HAL_UART_ErrorCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + huart->ErrorCode = HAL_UART_ERROR_NONE; + } + } + + if (huart->RxXferCount == 0U) + { + /* Disable the UART Parity Error Interrupt and RXFT interrupt*/ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_PEIE); + + /* Disable the UART Error Interrupt: (Frame error, noise error, overrun error) + and RX FIFO Threshold interrupt */ + ATOMIC_CLEAR_BIT(huart->Instance->CR3, (USART_CR3_EIE | USART_CR3_RXFTIE)); + + /* Rx process is completed, restore huart->RxState to Ready */ + huart->RxState = HAL_UART_STATE_READY; + + /* Clear RxISR function pointer */ + huart->RxISR = NULL; + + /* Initialize type of RxEvent to Transfer Complete */ + huart->RxEventType = HAL_UART_RXEVENT_TC; + + if (!(IS_LPUART_INSTANCE(huart->Instance))) + { + /* Check that USART RTOEN bit is set */ + if (READ_BIT(huart->Instance->CR2, USART_CR2_RTOEN) != 0U) + { + /* Enable the UART Receiver Timeout Interrupt */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_RTOIE); + } + } + + /* Check current reception Mode : + If Reception till IDLE event has been selected : */ + if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) + { + /* Set reception type to Standard */ + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + /* Disable IDLE interrupt */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_IDLEIE); + + if (__HAL_UART_GET_FLAG(huart, UART_FLAG_IDLE) == SET) + { + /* Clear IDLE Flag */ + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_IDLEF); + } + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Rx Event callback*/ + huart->RxEventCallback(huart, huart->RxXferSize); +#else + /*Call legacy weak Rx Event callback*/ + HAL_UARTEx_RxEventCallback(huart, huart->RxXferSize); +#endif /* (USE_HAL_UART_REGISTER_CALLBACKS) */ + } + else + { + /* Standard reception API called */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Rx complete callback*/ + huart->RxCpltCallback(huart); +#else + /*Call legacy weak Rx complete callback*/ + HAL_UART_RxCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + } + break; + } + } + + /* When remaining number of bytes to receive is less than the RX FIFO + threshold, next incoming frames are processed as if FIFO mode was + disabled (i.e. one interrupt per received frame). + */ + rxdatacount = huart->RxXferCount; + if ((rxdatacount != 0U) && (rxdatacount < huart->NbRxDataToProcess)) + { + /* Disable the UART RXFT interrupt*/ + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_RXFTIE); + + /* Update the RxISR function pointer */ + huart->RxISR = UART_RxISR_8BIT; + + /* Enable the UART Data Register Not Empty interrupt */ + ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_RXNEIE_RXFNEIE); + } + } + else + { + /* Clear RXNE interrupt flag */ + __HAL_UART_SEND_REQ(huart, UART_RXDATA_FLUSH_REQUEST); + } +} + +/** + * @brief RX interrupt handler for 9 bits data word length and FIFO mode is enabled. + * @note Function is called under interruption only, once + * interruptions have been enabled by HAL_UART_Receive_IT() + * @param huart UART handle. + * @retval None + */ +static void UART_RxISR_16BIT_FIFOEN(UART_HandleTypeDef *huart) +{ + uint16_t *tmp; + uint16_t uhMask = huart->Mask; + uint16_t uhdata; + uint16_t nb_rx_data; + uint16_t rxdatacount; + uint32_t isrflags = READ_REG(huart->Instance->ISR); + uint32_t cr1its = READ_REG(huart->Instance->CR1); + uint32_t cr3its = READ_REG(huart->Instance->CR3); + + /* Check that a Rx process is ongoing */ + if (huart->RxState == HAL_UART_STATE_BUSY_RX) + { + nb_rx_data = huart->NbRxDataToProcess; + while ((nb_rx_data > 0U) && ((isrflags & USART_ISR_RXNE_RXFNE) != 0U)) + { + uhdata = (uint16_t) READ_REG(huart->Instance->RDR); + tmp = (uint16_t *) huart->pRxBuffPtr ; + *tmp = (uint16_t)(uhdata & uhMask); + huart->pRxBuffPtr += 2U; + huart->RxXferCount--; + isrflags = READ_REG(huart->Instance->ISR); + + /* If some non blocking errors occurred */ + if ((isrflags & (USART_ISR_PE | USART_ISR_FE | USART_ISR_NE)) != 0U) + { + /* UART parity error interrupt occurred -------------------------------------*/ + if (((isrflags & USART_ISR_PE) != 0U) && ((cr1its & USART_CR1_PEIE) != 0U)) + { + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_PEF); + + huart->ErrorCode |= HAL_UART_ERROR_PE; + } + + /* UART frame error interrupt occurred --------------------------------------*/ + if (((isrflags & USART_ISR_FE) != 0U) && ((cr3its & USART_CR3_EIE) != 0U)) + { + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_FEF); + + huart->ErrorCode |= HAL_UART_ERROR_FE; + } + + /* UART noise error interrupt occurred --------------------------------------*/ + if (((isrflags & USART_ISR_NE) != 0U) && ((cr3its & USART_CR3_EIE) != 0U)) + { + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_NEF); + + huart->ErrorCode |= HAL_UART_ERROR_NE; + } + + /* Call UART Error Call back function if need be ----------------------------*/ + if (huart->ErrorCode != HAL_UART_ERROR_NONE) + { + /* Non Blocking error : transfer could go on. + Error is notified to user through user error callback */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered error callback*/ + huart->ErrorCallback(huart); +#else + /*Call legacy weak error callback*/ + HAL_UART_ErrorCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + huart->ErrorCode = HAL_UART_ERROR_NONE; + } + } + + if (huart->RxXferCount == 0U) + { + /* Disable the UART Parity Error Interrupt and RXFT interrupt*/ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_PEIE); + + /* Disable the UART Error Interrupt: (Frame error, noise error, overrun error) + and RX FIFO Threshold interrupt */ + ATOMIC_CLEAR_BIT(huart->Instance->CR3, (USART_CR3_EIE | USART_CR3_RXFTIE)); + + /* Rx process is completed, restore huart->RxState to Ready */ + huart->RxState = HAL_UART_STATE_READY; + + /* Clear RxISR function pointer */ + huart->RxISR = NULL; + + /* Initialize type of RxEvent to Transfer Complete */ + huart->RxEventType = HAL_UART_RXEVENT_TC; + + if (!(IS_LPUART_INSTANCE(huart->Instance))) + { + /* Check that USART RTOEN bit is set */ + if (READ_BIT(huart->Instance->CR2, USART_CR2_RTOEN) != 0U) + { + /* Enable the UART Receiver Timeout Interrupt */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_RTOIE); + } + } + + /* Check current reception Mode : + If Reception till IDLE event has been selected : */ + if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) + { + /* Set reception type to Standard */ + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + /* Disable IDLE interrupt */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_IDLEIE); + + if (__HAL_UART_GET_FLAG(huart, UART_FLAG_IDLE) == SET) + { + /* Clear IDLE Flag */ + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_IDLEF); + } + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Rx Event callback*/ + huart->RxEventCallback(huart, huart->RxXferSize); +#else + /*Call legacy weak Rx Event callback*/ + HAL_UARTEx_RxEventCallback(huart, huart->RxXferSize); +#endif /* (USE_HAL_UART_REGISTER_CALLBACKS) */ + } + else + { + /* Standard reception API called */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Rx complete callback*/ + huart->RxCpltCallback(huart); +#else + /*Call legacy weak Rx complete callback*/ + HAL_UART_RxCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + } + break; + } + } + + /* When remaining number of bytes to receive is less than the RX FIFO + threshold, next incoming frames are processed as if FIFO mode was + disabled (i.e. one interrupt per received frame). + */ + rxdatacount = huart->RxXferCount; + if ((rxdatacount != 0U) && (rxdatacount < huart->NbRxDataToProcess)) + { + /* Disable the UART RXFT interrupt*/ + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_RXFTIE); + + /* Update the RxISR function pointer */ + huart->RxISR = UART_RxISR_16BIT; + + /* Enable the UART Data Register Not Empty interrupt */ + ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_RXNEIE_RXFNEIE); + } + } + else + { + /* Clear RXNE interrupt flag */ + __HAL_UART_SEND_REQ(huart, UART_RXDATA_FLUSH_REQUEST); + } +} +#endif /* USART_CR1_FIFOEN */ + +/** + * @} + */ + +#endif /* HAL_UART_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + diff --git a/CablePositioning_IAP_V1.0/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart_ex.c b/CablePositioning_IAP_V1.0/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart_ex.c index e509676..9d8a60a 100644 --- a/CablePositioning_IAP_V1.0/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart_ex.c +++ b/CablePositioning_IAP_V1.0/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart_ex.c @@ -1,1074 +1,1098 @@ -/** - ****************************************************************************** - * @file stm32l4xx_hal_uart_ex.c - * @author MCD Application Team - * @brief Extended UART HAL module driver. - * This file provides firmware functions to manage the following extended - * functionalities of the Universal Asynchronous Receiver Transmitter Peripheral (UART). - * + Initialization and de-initialization functions - * + Peripheral Control functions - * - * - ****************************************************************************** - * @attention - * - * Copyright (c) 2017 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - @verbatim - ============================================================================== - ##### UART peripheral extended features ##### - ============================================================================== - - (#) Declare a UART_HandleTypeDef handle structure. - - (#) For the UART RS485 Driver Enable mode, initialize the UART registers - by calling the HAL_RS485Ex_Init() API. - - (#) FIFO mode enabling/disabling and RX/TX FIFO threshold programming. - - -@- When UART operates in FIFO mode, FIFO mode must be enabled prior - starting RX/TX transfers. Also RX/TX FIFO thresholds must be - configured prior starting RX/TX transfers. - - @endverbatim - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32l4xx_hal.h" - -/** @addtogroup STM32L4xx_HAL_Driver - * @{ - */ - -/** @defgroup UARTEx UARTEx - * @brief UART Extended HAL module driver - * @{ - */ - -#ifdef HAL_UART_MODULE_ENABLED - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -#if defined(USART_CR1_FIFOEN) -/** @defgroup UARTEX_Private_Constants UARTEx Private Constants - * @{ - */ -/* UART RX FIFO depth */ -#define RX_FIFO_DEPTH 8U - -/* UART TX FIFO depth */ -#define TX_FIFO_DEPTH 8U -/** - * @} - */ -#endif /* USART_CR1_FIFOEN */ - -/* Private macros ------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ -/** @defgroup UARTEx_Private_Functions UARTEx Private Functions - * @{ - */ -static void UARTEx_Wakeup_AddressConfig(UART_HandleTypeDef *huart, UART_WakeUpTypeDef WakeUpSelection); -#if defined(USART_CR1_FIFOEN) -static void UARTEx_SetNbDataToProcess(UART_HandleTypeDef *huart); -#endif /* USART_CR1_FIFOEN */ -/** - * @} - */ - -/* Exported functions --------------------------------------------------------*/ - -/** @defgroup UARTEx_Exported_Functions UARTEx Exported Functions - * @{ - */ - -/** @defgroup UARTEx_Exported_Functions_Group1 Initialization and de-initialization functions - * @brief Extended Initialization and Configuration Functions - * -@verbatim -=============================================================================== - ##### Initialization and Configuration functions ##### - =============================================================================== - [..] - This subsection provides a set of functions allowing to initialize the USARTx or the UARTy - in asynchronous mode. - (+) For the asynchronous mode the parameters below can be configured: - (++) Baud Rate - (++) Word Length - (++) Stop Bit - (++) Parity: If the parity is enabled, then the MSB bit of the data written - in the data register is transmitted but is changed by the parity bit. - (++) Hardware flow control - (++) Receiver/transmitter modes - (++) Over Sampling Method - (++) One-Bit Sampling Method - (+) For the asynchronous mode, the following advanced features can be configured as well: - (++) TX and/or RX pin level inversion - (++) data logical level inversion - (++) RX and TX pins swap - (++) RX overrun detection disabling - (++) DMA disabling on RX error - (++) MSB first on communication line - (++) auto Baud rate detection - [..] - The HAL_RS485Ex_Init() API follows the UART RS485 mode configuration - procedures (details for the procedures are available in reference manual). - -@endverbatim - - Depending on the frame length defined by the M1 and M0 bits (7-bit, - 8-bit or 9-bit), the possible UART formats are listed in the - following table. - - Table 1. UART frame format. - +-----------------------------------------------------------------------+ - | M1 bit | M0 bit | PCE bit | UART frame | - |---------|---------|-----------|---------------------------------------| - | 0 | 0 | 0 | | SB | 8 bit data | STB | | - |---------|---------|-----------|---------------------------------------| - | 0 | 0 | 1 | | SB | 7 bit data | PB | STB | | - |---------|---------|-----------|---------------------------------------| - | 0 | 1 | 0 | | SB | 9 bit data | STB | | - |---------|---------|-----------|---------------------------------------| - | 0 | 1 | 1 | | SB | 8 bit data | PB | STB | | - |---------|---------|-----------|---------------------------------------| - | 1 | 0 | 0 | | SB | 7 bit data | STB | | - |---------|---------|-----------|---------------------------------------| - | 1 | 0 | 1 | | SB | 6 bit data | PB | STB | | - +-----------------------------------------------------------------------+ - - * @{ - */ - -/** - * @brief Initialize the RS485 Driver enable feature according to the specified - * parameters in the UART_InitTypeDef and creates the associated handle. - * @param huart UART handle. - * @param Polarity Select the driver enable polarity. - * This parameter can be one of the following values: - * @arg @ref UART_DE_POLARITY_HIGH DE signal is active high - * @arg @ref UART_DE_POLARITY_LOW DE signal is active low - * @param AssertionTime Driver Enable assertion time: - * 5-bit value defining the time between the activation of the DE (Driver Enable) - * signal and the beginning of the start bit. It is expressed in sample time - * units (1/8 or 1/16 bit time, depending on the oversampling rate) - * @param DeassertionTime Driver Enable deassertion time: - * 5-bit value defining the time between the end of the last stop bit, in a - * transmitted message, and the de-activation of the DE (Driver Enable) signal. - * It is expressed in sample time units (1/8 or 1/16 bit time, depending on the - * oversampling rate). - * @retval HAL status - */ -HAL_StatusTypeDef HAL_RS485Ex_Init(UART_HandleTypeDef *huart, uint32_t Polarity, uint32_t AssertionTime, - uint32_t DeassertionTime) -{ - uint32_t temp; - - /* Check the UART handle allocation */ - if (huart == NULL) - { - return HAL_ERROR; - } - /* Check the Driver Enable UART instance */ - assert_param(IS_UART_DRIVER_ENABLE_INSTANCE(huart->Instance)); - - /* Check the Driver Enable polarity */ - assert_param(IS_UART_DE_POLARITY(Polarity)); - - /* Check the Driver Enable assertion time */ - assert_param(IS_UART_ASSERTIONTIME(AssertionTime)); - - /* Check the Driver Enable deassertion time */ - assert_param(IS_UART_DEASSERTIONTIME(DeassertionTime)); - - if (huart->gState == HAL_UART_STATE_RESET) - { - /* Allocate lock resource and initialize it */ - huart->Lock = HAL_UNLOCKED; - -#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) - UART_InitCallbacksToDefault(huart); - - if (huart->MspInitCallback == NULL) - { - huart->MspInitCallback = HAL_UART_MspInit; - } - - /* Init the low level hardware */ - huart->MspInitCallback(huart); -#else - /* Init the low level hardware : GPIO, CLOCK, CORTEX */ - HAL_UART_MspInit(huart); -#endif /* (USE_HAL_UART_REGISTER_CALLBACKS) */ - } - - huart->gState = HAL_UART_STATE_BUSY; - - /* Disable the Peripheral */ - __HAL_UART_DISABLE(huart); - - /* Set the UART Communication parameters */ - if (UART_SetConfig(huart) == HAL_ERROR) - { - return HAL_ERROR; - } - - if (huart->AdvancedInit.AdvFeatureInit != UART_ADVFEATURE_NO_INIT) - { - UART_AdvFeatureConfig(huart); - } - - /* Enable the Driver Enable mode by setting the DEM bit in the CR3 register */ - SET_BIT(huart->Instance->CR3, USART_CR3_DEM); - - /* Set the Driver Enable polarity */ - MODIFY_REG(huart->Instance->CR3, USART_CR3_DEP, Polarity); - - /* Set the Driver Enable assertion and deassertion times */ - temp = (AssertionTime << UART_CR1_DEAT_ADDRESS_LSB_POS); - temp |= (DeassertionTime << UART_CR1_DEDT_ADDRESS_LSB_POS); - MODIFY_REG(huart->Instance->CR1, (USART_CR1_DEDT | USART_CR1_DEAT), temp); - - /* Enable the Peripheral */ - __HAL_UART_ENABLE(huart); - - /* TEACK and/or REACK to check before moving huart->gState and huart->RxState to Ready */ - return (UART_CheckIdleState(huart)); -} - -/** - * @} - */ - -/** @defgroup UARTEx_Exported_Functions_Group2 IO operation functions - * @brief Extended functions - * -@verbatim - =============================================================================== - ##### IO operation functions ##### - =============================================================================== - This subsection provides a set of Wakeup and FIFO mode related callback functions. - - (#) Wakeup from Stop mode Callback: - (+) HAL_UARTEx_WakeupCallback() - - (#) TX/RX Fifos Callbacks: - (+) HAL_UARTEx_RxFifoFullCallback() - (+) HAL_UARTEx_TxFifoEmptyCallback() - -@endverbatim - * @{ - */ - -/** - * @brief UART wakeup from Stop mode callback. - * @param huart UART handle. - * @retval None - */ -__weak void HAL_UARTEx_WakeupCallback(UART_HandleTypeDef *huart) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(huart); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_UARTEx_WakeupCallback can be implemented in the user file. - */ -} - -#if defined(USART_CR1_FIFOEN) -/** - * @brief UART RX Fifo full callback. - * @param huart UART handle. - * @retval None - */ -__weak void HAL_UARTEx_RxFifoFullCallback(UART_HandleTypeDef *huart) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(huart); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_UARTEx_RxFifoFullCallback can be implemented in the user file. - */ -} - -/** - * @brief UART TX Fifo empty callback. - * @param huart UART handle. - * @retval None - */ -__weak void HAL_UARTEx_TxFifoEmptyCallback(UART_HandleTypeDef *huart) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(huart); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_UARTEx_TxFifoEmptyCallback can be implemented in the user file. - */ -} -#endif /* USART_CR1_FIFOEN */ - -/** - * @} - */ - -/** @defgroup UARTEx_Exported_Functions_Group3 Peripheral Control functions - * @brief Extended Peripheral Control functions - * -@verbatim - =============================================================================== - ##### Peripheral Control functions ##### - =============================================================================== - [..] This section provides the following functions: - (+) HAL_UARTEx_EnableClockStopMode() API enables the UART clock (HSI or LSE only) during stop mode - (+) HAL_UARTEx_DisableClockStopMode() API disables the above functionality - (+) HAL_MultiProcessorEx_AddressLength_Set() API optionally sets the UART node address - detection length to more than 4 bits for multiprocessor address mark wake up. - (+) HAL_UARTEx_StopModeWakeUpSourceConfig() API defines the wake-up from stop mode - trigger: address match, Start Bit detection or RXNE bit status. - (+) HAL_UARTEx_EnableStopMode() API enables the UART to wake up the MCU from stop mode - (+) HAL_UARTEx_DisableStopMode() API disables the above functionality - (+) HAL_UARTEx_EnableFifoMode() API enables the FIFO mode - (+) HAL_UARTEx_DisableFifoMode() API disables the FIFO mode - (+) HAL_UARTEx_SetTxFifoThreshold() API sets the TX FIFO threshold - (+) HAL_UARTEx_SetRxFifoThreshold() API sets the RX FIFO threshold - - [..] This subsection also provides a set of additional functions providing enhanced reception - services to user. (For example, these functions allow application to handle use cases - where number of data to be received is unknown). - - (#) Compared to standard reception services which only consider number of received - data elements as reception completion criteria, these functions also consider additional events - as triggers for updating reception status to caller : - (+) Detection of inactivity period (RX line has not been active for a given period). - (++) RX inactivity detected by IDLE event, i.e. RX line has been in idle state (normally high state) - for 1 frame time, after last received byte. - (++) RX inactivity detected by RTO, i.e. line has been in idle state - for a programmable time, after last received byte. - (+) Detection that a specific character has been received. - - (#) There are two mode of transfer: - (+) Blocking mode: The reception is performed in polling mode, until either expected number of data is received, - or till IDLE event occurs. Reception is handled only during function execution. - When function exits, no data reception could occur. HAL status and number of actually received data elements, - are returned by function after finishing transfer. - (+) Non-Blocking mode: The reception is performed using Interrupts or DMA. - These API's return the HAL status. - The end of the data processing will be indicated through the - dedicated UART IRQ when using Interrupt mode or the DMA IRQ when using DMA mode. - The HAL_UARTEx_RxEventCallback() user callback will be executed during Receive process - The HAL_UART_ErrorCallback()user callback will be executed when a reception error is detected. - - (#) Blocking mode API: - (+) HAL_UARTEx_ReceiveToIdle() - - (#) Non-Blocking mode API with Interrupt: - (+) HAL_UARTEx_ReceiveToIdle_IT() - - (#) Non-Blocking mode API with DMA: - (+) HAL_UARTEx_ReceiveToIdle_DMA() - -@endverbatim - * @{ - */ - -#if defined(USART_CR3_UCESM) -/** - * @brief Keep UART Clock enabled when in Stop Mode. - * @note When the USART clock source is configured to be LSE or HSI, it is possible to keep enabled - * this clock during STOP mode by setting the UCESM bit in USART_CR3 control register. - * @note When LPUART is used to wakeup from stop with LSE is selected as LPUART clock source, - * and desired baud rate is 9600 baud, the bit UCESM bit in LPUART_CR3 control register must be set. - * @param huart UART handle. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_UARTEx_EnableClockStopMode(UART_HandleTypeDef *huart) -{ - /* Process Locked */ - __HAL_LOCK(huart); - - /* Set UCESM bit */ - ATOMIC_SET_BIT(huart->Instance->CR3, USART_CR3_UCESM); - - /* Process Unlocked */ - __HAL_UNLOCK(huart); - - return HAL_OK; -} - -/** - * @brief Disable UART Clock when in Stop Mode. - * @param huart UART handle. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_UARTEx_DisableClockStopMode(UART_HandleTypeDef *huart) -{ - /* Process Locked */ - __HAL_LOCK(huart); - - /* Clear UCESM bit */ - ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_UCESM); - - /* Process Unlocked */ - __HAL_UNLOCK(huart); - - return HAL_OK; -} - -#endif /* USART_CR3_UCESM */ -/** - * @brief By default in multiprocessor mode, when the wake up method is set - * to address mark, the UART handles only 4-bit long addresses detection; - * this API allows to enable longer addresses detection (6-, 7- or 8-bit - * long). - * @note Addresses detection lengths are: 6-bit address detection in 7-bit data mode, - * 7-bit address detection in 8-bit data mode, 8-bit address detection in 9-bit data mode. - * @param huart UART handle. - * @param AddressLength This parameter can be one of the following values: - * @arg @ref UART_ADDRESS_DETECT_4B 4-bit long address - * @arg @ref UART_ADDRESS_DETECT_7B 6-, 7- or 8-bit long address - * @retval HAL status - */ -HAL_StatusTypeDef HAL_MultiProcessorEx_AddressLength_Set(UART_HandleTypeDef *huart, uint32_t AddressLength) -{ - /* Check the UART handle allocation */ - if (huart == NULL) - { - return HAL_ERROR; - } - - /* Check the address length parameter */ - assert_param(IS_UART_ADDRESSLENGTH_DETECT(AddressLength)); - - huart->gState = HAL_UART_STATE_BUSY; - - /* Disable the Peripheral */ - __HAL_UART_DISABLE(huart); - - /* Set the address length */ - MODIFY_REG(huart->Instance->CR2, USART_CR2_ADDM7, AddressLength); - - /* Enable the Peripheral */ - __HAL_UART_ENABLE(huart); - - /* TEACK and/or REACK to check before moving huart->gState to Ready */ - return (UART_CheckIdleState(huart)); -} - -/** - * @brief Set Wakeup from Stop mode interrupt flag selection. - * @note It is the application responsibility to enable the interrupt used as - * usart_wkup interrupt source before entering low-power mode. - * @param huart UART handle. - * @param WakeUpSelection Address match, Start Bit detection or RXNE/RXFNE bit status. - * This parameter can be one of the following values: - * @arg @ref UART_WAKEUP_ON_ADDRESS - * @arg @ref UART_WAKEUP_ON_STARTBIT - * @arg @ref UART_WAKEUP_ON_READDATA_NONEMPTY - * @retval HAL status - */ -HAL_StatusTypeDef HAL_UARTEx_StopModeWakeUpSourceConfig(UART_HandleTypeDef *huart, UART_WakeUpTypeDef WakeUpSelection) -{ - HAL_StatusTypeDef status = HAL_OK; - uint32_t tickstart; - - /* check the wake-up from stop mode UART instance */ - assert_param(IS_UART_WAKEUP_FROMSTOP_INSTANCE(huart->Instance)); - /* check the wake-up selection parameter */ - assert_param(IS_UART_WAKEUP_SELECTION(WakeUpSelection.WakeUpEvent)); - - /* Process Locked */ - __HAL_LOCK(huart); - - huart->gState = HAL_UART_STATE_BUSY; - - /* Disable the Peripheral */ - __HAL_UART_DISABLE(huart); - - /* Set the wake-up selection scheme */ - MODIFY_REG(huart->Instance->CR3, USART_CR3_WUS, WakeUpSelection.WakeUpEvent); - - if (WakeUpSelection.WakeUpEvent == UART_WAKEUP_ON_ADDRESS) - { - UARTEx_Wakeup_AddressConfig(huart, WakeUpSelection); - } - - /* Enable the Peripheral */ - __HAL_UART_ENABLE(huart); - - /* Init tickstart for timeout management */ - tickstart = HAL_GetTick(); - - /* Wait until REACK flag is set */ - if (UART_WaitOnFlagUntilTimeout(huart, USART_ISR_REACK, RESET, tickstart, HAL_UART_TIMEOUT_VALUE) != HAL_OK) - { - status = HAL_TIMEOUT; - } - else - { - /* Initialize the UART State */ - huart->gState = HAL_UART_STATE_READY; - } - - /* Process Unlocked */ - __HAL_UNLOCK(huart); - - return status; -} - -/** - * @brief Enable UART Stop Mode. - * @note The UART is able to wake up the MCU from Stop 1 mode as long as UART clock is HSI or LSE. - * @param huart UART handle. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_UARTEx_EnableStopMode(UART_HandleTypeDef *huart) -{ - /* Process Locked */ - __HAL_LOCK(huart); - - /* Set UESM bit */ - ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_UESM); - - /* Process Unlocked */ - __HAL_UNLOCK(huart); - - return HAL_OK; -} - -/** - * @brief Disable UART Stop Mode. - * @param huart UART handle. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_UARTEx_DisableStopMode(UART_HandleTypeDef *huart) -{ - /* Process Locked */ - __HAL_LOCK(huart); - - /* Clear UESM bit */ - ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_UESM); - - /* Process Unlocked */ - __HAL_UNLOCK(huart); - - return HAL_OK; -} - -#if defined(USART_CR1_FIFOEN) -/** - * @brief Enable the FIFO mode. - * @param huart UART handle. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_UARTEx_EnableFifoMode(UART_HandleTypeDef *huart) -{ - uint32_t tmpcr1; - - /* Check parameters */ - assert_param(IS_UART_FIFO_INSTANCE(huart->Instance)); - - /* Process Locked */ - __HAL_LOCK(huart); - - huart->gState = HAL_UART_STATE_BUSY; - - /* Save actual UART configuration */ - tmpcr1 = READ_REG(huart->Instance->CR1); - - /* Disable UART */ - __HAL_UART_DISABLE(huart); - - /* Enable FIFO mode */ - SET_BIT(tmpcr1, USART_CR1_FIFOEN); - huart->FifoMode = UART_FIFOMODE_ENABLE; - - /* Restore UART configuration */ - WRITE_REG(huart->Instance->CR1, tmpcr1); - - /* Determine the number of data to process during RX/TX ISR execution */ - UARTEx_SetNbDataToProcess(huart); - - huart->gState = HAL_UART_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(huart); - - return HAL_OK; -} - -/** - * @brief Disable the FIFO mode. - * @param huart UART handle. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_UARTEx_DisableFifoMode(UART_HandleTypeDef *huart) -{ - uint32_t tmpcr1; - - /* Check parameters */ - assert_param(IS_UART_FIFO_INSTANCE(huart->Instance)); - - /* Process Locked */ - __HAL_LOCK(huart); - - huart->gState = HAL_UART_STATE_BUSY; - - /* Save actual UART configuration */ - tmpcr1 = READ_REG(huart->Instance->CR1); - - /* Disable UART */ - __HAL_UART_DISABLE(huart); - - /* Enable FIFO mode */ - CLEAR_BIT(tmpcr1, USART_CR1_FIFOEN); - huart->FifoMode = UART_FIFOMODE_DISABLE; - - /* Restore UART configuration */ - WRITE_REG(huart->Instance->CR1, tmpcr1); - - huart->gState = HAL_UART_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(huart); - - return HAL_OK; -} - -/** - * @brief Set the TXFIFO threshold. - * @param huart UART handle. - * @param Threshold TX FIFO threshold value - * This parameter can be one of the following values: - * @arg @ref UART_TXFIFO_THRESHOLD_1_8 - * @arg @ref UART_TXFIFO_THRESHOLD_1_4 - * @arg @ref UART_TXFIFO_THRESHOLD_1_2 - * @arg @ref UART_TXFIFO_THRESHOLD_3_4 - * @arg @ref UART_TXFIFO_THRESHOLD_7_8 - * @arg @ref UART_TXFIFO_THRESHOLD_8_8 - * @retval HAL status - */ -HAL_StatusTypeDef HAL_UARTEx_SetTxFifoThreshold(UART_HandleTypeDef *huart, uint32_t Threshold) -{ - uint32_t tmpcr1; - - /* Check parameters */ - assert_param(IS_UART_FIFO_INSTANCE(huart->Instance)); - assert_param(IS_UART_TXFIFO_THRESHOLD(Threshold)); - - /* Process Locked */ - __HAL_LOCK(huart); - - huart->gState = HAL_UART_STATE_BUSY; - - /* Save actual UART configuration */ - tmpcr1 = READ_REG(huart->Instance->CR1); - - /* Disable UART */ - __HAL_UART_DISABLE(huart); - - /* Update TX threshold configuration */ - MODIFY_REG(huart->Instance->CR3, USART_CR3_TXFTCFG, Threshold); - - /* Determine the number of data to process during RX/TX ISR execution */ - UARTEx_SetNbDataToProcess(huart); - - /* Restore UART configuration */ - WRITE_REG(huart->Instance->CR1, tmpcr1); - - huart->gState = HAL_UART_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(huart); - - return HAL_OK; -} - -/** - * @brief Set the RXFIFO threshold. - * @param huart UART handle. - * @param Threshold RX FIFO threshold value - * This parameter can be one of the following values: - * @arg @ref UART_RXFIFO_THRESHOLD_1_8 - * @arg @ref UART_RXFIFO_THRESHOLD_1_4 - * @arg @ref UART_RXFIFO_THRESHOLD_1_2 - * @arg @ref UART_RXFIFO_THRESHOLD_3_4 - * @arg @ref UART_RXFIFO_THRESHOLD_7_8 - * @arg @ref UART_RXFIFO_THRESHOLD_8_8 - * @retval HAL status - */ -HAL_StatusTypeDef HAL_UARTEx_SetRxFifoThreshold(UART_HandleTypeDef *huart, uint32_t Threshold) -{ - uint32_t tmpcr1; - - /* Check the parameters */ - assert_param(IS_UART_FIFO_INSTANCE(huart->Instance)); - assert_param(IS_UART_RXFIFO_THRESHOLD(Threshold)); - - /* Process Locked */ - __HAL_LOCK(huart); - - huart->gState = HAL_UART_STATE_BUSY; - - /* Save actual UART configuration */ - tmpcr1 = READ_REG(huart->Instance->CR1); - - /* Disable UART */ - __HAL_UART_DISABLE(huart); - - /* Update RX threshold configuration */ - MODIFY_REG(huart->Instance->CR3, USART_CR3_RXFTCFG, Threshold); - - /* Determine the number of data to process during RX/TX ISR execution */ - UARTEx_SetNbDataToProcess(huart); - - /* Restore UART configuration */ - WRITE_REG(huart->Instance->CR1, tmpcr1); - - huart->gState = HAL_UART_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(huart); - - return HAL_OK; -} - -#endif /* USART_CR1_FIFOEN */ -/** - * @brief Receive an amount of data in blocking mode till either the expected number of data - * is received or an IDLE event occurs. - * @note HAL_OK is returned if reception is completed (expected number of data has been received) - * or if reception is stopped after IDLE event (less than the expected number of data has been received) - * In this case, RxLen output parameter indicates number of data available in reception buffer. - * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), - * the received data is handled as a set of uint16_t. In this case, Size must indicate the number - * of uint16_t available through pData. - * @note When FIFO mode is enabled, the RXFNE flag is set as long as the RXFIFO - * is not empty. Read operations from the RDR register are performed when - * RXFNE flag is set. From hardware perspective, RXFNE flag and - * RXNE are mapped on the same bit-field. - * @param huart UART handle. - * @param pData Pointer to data buffer (uint8_t or uint16_t data elements). - * @param Size Amount of data elements (uint8_t or uint16_t) to be received. - * @param RxLen Number of data elements finally received - * (could be lower than Size, in case reception ends on IDLE event) - * @param Timeout Timeout duration expressed in ms (covers the whole reception sequence). - * @retval HAL status - */ -HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint16_t *RxLen, - uint32_t Timeout) -{ - uint8_t *pdata8bits; - uint16_t *pdata16bits; - uint16_t uhMask; - uint32_t tickstart; - - /* Check that a Rx process is not already ongoing */ - if (huart->RxState == HAL_UART_STATE_READY) - { - if ((pData == NULL) || (Size == 0U)) - { - return HAL_ERROR; - } - - __HAL_LOCK(huart); - - huart->ErrorCode = HAL_UART_ERROR_NONE; - huart->RxState = HAL_UART_STATE_BUSY_RX; - huart->ReceptionType = HAL_UART_RECEPTION_TOIDLE; - - /* Init tickstart for timeout management */ - tickstart = HAL_GetTick(); - - huart->RxXferSize = Size; - huart->RxXferCount = Size; - - /* Computation of UART mask to apply to RDR register */ - UART_MASK_COMPUTATION(huart); - uhMask = huart->Mask; - - /* In case of 9bits/No Parity transfer, pRxData needs to be handled as a uint16_t pointer */ - if ((huart->Init.WordLength == UART_WORDLENGTH_9B) && (huart->Init.Parity == UART_PARITY_NONE)) - { - pdata8bits = NULL; - pdata16bits = (uint16_t *) pData; - } - else - { - pdata8bits = pData; - pdata16bits = NULL; - } - - __HAL_UNLOCK(huart); - - /* Initialize output number of received elements */ - *RxLen = 0U; - - /* as long as data have to be received */ - while (huart->RxXferCount > 0U) - { - /* Check if IDLE flag is set */ - if (__HAL_UART_GET_FLAG(huart, UART_FLAG_IDLE)) - { - /* Clear IDLE flag in ISR */ - __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_IDLEF); - - /* If Set, but no data ever received, clear flag without exiting loop */ - /* If Set, and data has already been received, this means Idle Event is valid : End reception */ - if (*RxLen > 0U) - { - huart->RxState = HAL_UART_STATE_READY; - - return HAL_OK; - } - } - - /* Check if RXNE flag is set */ - if (__HAL_UART_GET_FLAG(huart, UART_FLAG_RXNE)) - { - if (pdata8bits == NULL) - { - *pdata16bits = (uint16_t)(huart->Instance->RDR & uhMask); - pdata16bits++; - } - else - { - *pdata8bits = (uint8_t)(huart->Instance->RDR & (uint8_t)uhMask); - pdata8bits++; - } - /* Increment number of received elements */ - *RxLen += 1U; - huart->RxXferCount--; - } - - /* Check for the Timeout */ - if (Timeout != HAL_MAX_DELAY) - { - if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U)) - { - huart->RxState = HAL_UART_STATE_READY; - - return HAL_TIMEOUT; - } - } - } - - /* Set number of received elements in output parameter : RxLen */ - *RxLen = huart->RxXferSize - huart->RxXferCount; - /* At end of Rx process, restore huart->RxState to Ready */ - huart->RxState = HAL_UART_STATE_READY; - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Receive an amount of data in interrupt mode till either the expected number of data - * is received or an IDLE event occurs. - * @note Reception is initiated by this function call. Further progress of reception is achieved thanks - * to UART interrupts raised by RXNE and IDLE events. Callback is called at end of reception indicating - * number of received data elements. - * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), - * the received data is handled as a set of uint16_t. In this case, Size must indicate the number - * of uint16_t available through pData. - * @param huart UART handle. - * @param pData Pointer to data buffer (uint8_t or uint16_t data elements). - * @param Size Amount of data elements (uint8_t or uint16_t) to be received. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size) -{ - HAL_StatusTypeDef status; - - /* Check that a Rx process is not already ongoing */ - if (huart->RxState == HAL_UART_STATE_READY) - { - if ((pData == NULL) || (Size == 0U)) - { - return HAL_ERROR; - } - - __HAL_LOCK(huart); - - /* Set Reception type to reception till IDLE Event*/ - huart->ReceptionType = HAL_UART_RECEPTION_TOIDLE; - - status = UART_Start_Receive_IT(huart, pData, Size); - - /* Check Rx process has been successfully started */ - if (status == HAL_OK) - { - if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) - { - __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_IDLEF); - ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_IDLEIE); - } - else - { - /* In case of errors already pending when reception is started, - Interrupts may have already been raised and lead to reception abortion. - (Overrun error for instance). - In such case Reception Type has been reset to HAL_UART_RECEPTION_STANDARD. */ - status = HAL_ERROR; - } - } - - return status; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Receive an amount of data in DMA mode till either the expected number - * of data is received or an IDLE event occurs. - * @note Reception is initiated by this function call. Further progress of reception is achieved thanks - * to DMA services, transferring automatically received data elements in user reception buffer and - * calling registered callbacks at half/end of reception. UART IDLE events are also used to consider - * reception phase as ended. In all cases, callback execution will indicate number of received data elements. - * @note When the UART parity is enabled (PCE = 1), the received data contain - * the parity bit (MSB position). - * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), - * the received data is handled as a set of uint16_t. In this case, Size must indicate the number - * of uint16_t available through pData. - * @param huart UART handle. - * @param pData Pointer to data buffer (uint8_t or uint16_t data elements). - * @param Size Amount of data elements (uint8_t or uint16_t) to be received. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size) -{ - HAL_StatusTypeDef status; - - /* Check that a Rx process is not already ongoing */ - if (huart->RxState == HAL_UART_STATE_READY) - { - if ((pData == NULL) || (Size == 0U)) - { - return HAL_ERROR; - } - - __HAL_LOCK(huart); - - /* Set Reception type to reception till IDLE Event*/ - huart->ReceptionType = HAL_UART_RECEPTION_TOIDLE; - - status = UART_Start_Receive_DMA(huart, pData, Size); - - /* Check Rx process has been successfully started */ - if (status == HAL_OK) - { - if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) - { - __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_IDLEF); - ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_IDLEIE); - } - else - { - /* In case of errors already pending when reception is started, - Interrupts may have already been raised and lead to reception abortion. - (Overrun error for instance). - In such case Reception Type has been reset to HAL_UART_RECEPTION_STANDARD. */ - status = HAL_ERROR; - } - } - - return status; - } - else - { - return HAL_BUSY; - } -} - -/** - * @} - */ - -/** - * @} - */ - -/** @addtogroup UARTEx_Private_Functions - * @{ - */ - -/** - * @brief Initialize the UART wake-up from stop mode parameters when triggered by address detection. - * @param huart UART handle. - * @param WakeUpSelection UART wake up from stop mode parameters. - * @retval None - */ -static void UARTEx_Wakeup_AddressConfig(UART_HandleTypeDef *huart, UART_WakeUpTypeDef WakeUpSelection) -{ - assert_param(IS_UART_ADDRESSLENGTH_DETECT(WakeUpSelection.AddressLength)); - - /* Set the USART address length */ - MODIFY_REG(huart->Instance->CR2, USART_CR2_ADDM7, WakeUpSelection.AddressLength); - - /* Set the USART address node */ - MODIFY_REG(huart->Instance->CR2, USART_CR2_ADD, ((uint32_t)WakeUpSelection.Address << UART_CR2_ADDRESS_LSB_POS)); -} - -#if defined(USART_CR1_FIFOEN) -/** - * @brief Calculate the number of data to process in RX/TX ISR. - * @note The RX FIFO depth and the TX FIFO depth is extracted from - * the UART configuration registers. - * @param huart UART handle. - * @retval None - */ -static void UARTEx_SetNbDataToProcess(UART_HandleTypeDef *huart) -{ - uint8_t rx_fifo_depth; - uint8_t tx_fifo_depth; - uint8_t rx_fifo_threshold; - uint8_t tx_fifo_threshold; - static const uint8_t numerator[] = {1U, 1U, 1U, 3U, 7U, 1U, 0U, 0U}; - static const uint8_t denominator[] = {8U, 4U, 2U, 4U, 8U, 1U, 1U, 1U}; - - if (huart->FifoMode == UART_FIFOMODE_DISABLE) - { - huart->NbTxDataToProcess = 1U; - huart->NbRxDataToProcess = 1U; - } - else - { - rx_fifo_depth = RX_FIFO_DEPTH; - tx_fifo_depth = TX_FIFO_DEPTH; - rx_fifo_threshold = (uint8_t)(READ_BIT(huart->Instance->CR3, USART_CR3_RXFTCFG) >> USART_CR3_RXFTCFG_Pos); - tx_fifo_threshold = (uint8_t)(READ_BIT(huart->Instance->CR3, USART_CR3_TXFTCFG) >> USART_CR3_TXFTCFG_Pos); - huart->NbTxDataToProcess = ((uint16_t)tx_fifo_depth * numerator[tx_fifo_threshold]) / - (uint16_t)denominator[tx_fifo_threshold]; - huart->NbRxDataToProcess = ((uint16_t)rx_fifo_depth * numerator[rx_fifo_threshold]) / - (uint16_t)denominator[rx_fifo_threshold]; - } -} -#endif /* USART_CR1_FIFOEN */ -/** - * @} - */ - -#endif /* HAL_UART_MODULE_ENABLED */ - -/** - * @} - */ - -/** - * @} - */ - +/** + ****************************************************************************** + * @file stm32l4xx_hal_uart_ex.c + * @author MCD Application Team + * @brief Extended UART HAL module driver. + * This file provides firmware functions to manage the following extended + * functionalities of the Universal Asynchronous Receiver Transmitter Peripheral (UART). + * + Initialization and de-initialization functions + * + Peripheral Control functions + * + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### UART peripheral extended features ##### + ============================================================================== + + (#) Declare a UART_HandleTypeDef handle structure. + + (#) For the UART RS485 Driver Enable mode, initialize the UART registers + by calling the HAL_RS485Ex_Init() API. + + (#) FIFO mode enabling/disabling and RX/TX FIFO threshold programming. + + -@- When UART operates in FIFO mode, FIFO mode must be enabled prior + starting RX/TX transfers. Also RX/TX FIFO thresholds must be + configured prior starting RX/TX transfers. + + @endverbatim + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l4xx_hal.h" + +/** @addtogroup STM32L4xx_HAL_Driver + * @{ + */ + +/** @defgroup UARTEx UARTEx + * @brief UART Extended HAL module driver + * @{ + */ + +#ifdef HAL_UART_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +#if defined(USART_CR1_FIFOEN) +/** @defgroup UARTEX_Private_Constants UARTEx Private Constants + * @{ + */ +/* UART RX FIFO depth */ +#define RX_FIFO_DEPTH 8U + +/* UART TX FIFO depth */ +#define TX_FIFO_DEPTH 8U +/** + * @} + */ +#endif /* USART_CR1_FIFOEN */ + +/* Private macros ------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/** @defgroup UARTEx_Private_Functions UARTEx Private Functions + * @{ + */ +static void UARTEx_Wakeup_AddressConfig(UART_HandleTypeDef *huart, UART_WakeUpTypeDef WakeUpSelection); +#if defined(USART_CR1_FIFOEN) +static void UARTEx_SetNbDataToProcess(UART_HandleTypeDef *huart); +#endif /* USART_CR1_FIFOEN */ +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup UARTEx_Exported_Functions UARTEx Exported Functions + * @{ + */ + +/** @defgroup UARTEx_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Extended Initialization and Configuration Functions + * +@verbatim +=============================================================================== + ##### Initialization and Configuration functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to initialize the USARTx or the UARTy + in asynchronous mode. + (+) For the asynchronous mode the parameters below can be configured: + (++) Baud Rate + (++) Word Length + (++) Stop Bit + (++) Parity: If the parity is enabled, then the MSB bit of the data written + in the data register is transmitted but is changed by the parity bit. + (++) Hardware flow control + (++) Receiver/transmitter modes + (++) Over Sampling Method + (++) One-Bit Sampling Method + (+) For the asynchronous mode, the following advanced features can be configured as well: + (++) TX and/or RX pin level inversion + (++) data logical level inversion + (++) RX and TX pins swap + (++) RX overrun detection disabling + (++) DMA disabling on RX error + (++) MSB first on communication line + (++) auto Baud rate detection + [..] + The HAL_RS485Ex_Init() API follows the UART RS485 mode configuration + procedures (details for the procedures are available in reference manual). + +@endverbatim + + Depending on the frame length defined by the M1 and M0 bits (7-bit, + 8-bit or 9-bit), the possible UART formats are listed in the + following table. + + Table 1. UART frame format. + +-----------------------------------------------------------------------+ + | M1 bit | M0 bit | PCE bit | UART frame | + |---------|---------|-----------|---------------------------------------| + | 0 | 0 | 0 | | SB | 8 bit data | STB | | + |---------|---------|-----------|---------------------------------------| + | 0 | 0 | 1 | | SB | 7 bit data | PB | STB | | + |---------|---------|-----------|---------------------------------------| + | 0 | 1 | 0 | | SB | 9 bit data | STB | | + |---------|---------|-----------|---------------------------------------| + | 0 | 1 | 1 | | SB | 8 bit data | PB | STB | | + |---------|---------|-----------|---------------------------------------| + | 1 | 0 | 0 | | SB | 7 bit data | STB | | + |---------|---------|-----------|---------------------------------------| + | 1 | 0 | 1 | | SB | 6 bit data | PB | STB | | + +-----------------------------------------------------------------------+ + + * @{ + */ + +/** + * @brief Initialize the RS485 Driver enable feature according to the specified + * parameters in the UART_InitTypeDef and creates the associated handle. + * @param huart UART handle. + * @param Polarity Select the driver enable polarity. + * This parameter can be one of the following values: + * @arg @ref UART_DE_POLARITY_HIGH DE signal is active high + * @arg @ref UART_DE_POLARITY_LOW DE signal is active low + * @param AssertionTime Driver Enable assertion time: + * 5-bit value defining the time between the activation of the DE (Driver Enable) + * signal and the beginning of the start bit. It is expressed in sample time + * units (1/8 or 1/16 bit time, depending on the oversampling rate) + * @param DeassertionTime Driver Enable deassertion time: + * 5-bit value defining the time between the end of the last stop bit, in a + * transmitted message, and the de-activation of the DE (Driver Enable) signal. + * It is expressed in sample time units (1/8 or 1/16 bit time, depending on the + * oversampling rate). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RS485Ex_Init(UART_HandleTypeDef *huart, uint32_t Polarity, uint32_t AssertionTime, + uint32_t DeassertionTime) +{ + uint32_t temp; + + /* Check the UART handle allocation */ + if (huart == NULL) + { + return HAL_ERROR; + } + /* Check the Driver Enable UART instance */ + assert_param(IS_UART_DRIVER_ENABLE_INSTANCE(huart->Instance)); + + /* Check the Driver Enable polarity */ + assert_param(IS_UART_DE_POLARITY(Polarity)); + + /* Check the Driver Enable assertion time */ + assert_param(IS_UART_ASSERTIONTIME(AssertionTime)); + + /* Check the Driver Enable deassertion time */ + assert_param(IS_UART_DEASSERTIONTIME(DeassertionTime)); + + if (huart->gState == HAL_UART_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + huart->Lock = HAL_UNLOCKED; + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + UART_InitCallbacksToDefault(huart); + + if (huart->MspInitCallback == NULL) + { + huart->MspInitCallback = HAL_UART_MspInit; + } + + /* Init the low level hardware */ + huart->MspInitCallback(huart); +#else + /* Init the low level hardware : GPIO, CLOCK, CORTEX */ + HAL_UART_MspInit(huart); +#endif /* (USE_HAL_UART_REGISTER_CALLBACKS) */ + } + + huart->gState = HAL_UART_STATE_BUSY; + + /* Disable the Peripheral */ + __HAL_UART_DISABLE(huart); + + /* Perform advanced settings configuration */ + /* For some items, configuration requires to be done prior TE and RE bits are set */ + if (huart->AdvancedInit.AdvFeatureInit != UART_ADVFEATURE_NO_INIT) + { + UART_AdvFeatureConfig(huart); + } + + /* Set the UART Communication parameters */ + if (UART_SetConfig(huart) == HAL_ERROR) + { + return HAL_ERROR; + } + + /* Enable the Driver Enable mode by setting the DEM bit in the CR3 register */ + SET_BIT(huart->Instance->CR3, USART_CR3_DEM); + + /* Set the Driver Enable polarity */ + MODIFY_REG(huart->Instance->CR3, USART_CR3_DEP, Polarity); + + /* Set the Driver Enable assertion and deassertion times */ + temp = (AssertionTime << UART_CR1_DEAT_ADDRESS_LSB_POS); + temp |= (DeassertionTime << UART_CR1_DEDT_ADDRESS_LSB_POS); + MODIFY_REG(huart->Instance->CR1, (USART_CR1_DEDT | USART_CR1_DEAT), temp); + + /* Enable the Peripheral */ + __HAL_UART_ENABLE(huart); + + /* TEACK and/or REACK to check before moving huart->gState and huart->RxState to Ready */ + return (UART_CheckIdleState(huart)); +} + +/** + * @} + */ + +/** @defgroup UARTEx_Exported_Functions_Group2 IO operation functions + * @brief Extended functions + * +@verbatim + =============================================================================== + ##### IO operation functions ##### + =============================================================================== + This subsection provides a set of Wakeup and FIFO mode related callback functions. + + (#) Wakeup from Stop mode Callback: + (+) HAL_UARTEx_WakeupCallback() + + (#) TX/RX Fifos Callbacks: + (+) HAL_UARTEx_RxFifoFullCallback() + (+) HAL_UARTEx_TxFifoEmptyCallback() + +@endverbatim + * @{ + */ + +/** + * @brief UART wakeup from Stop mode callback. + * @param huart UART handle. + * @retval None + */ +__weak void HAL_UARTEx_WakeupCallback(UART_HandleTypeDef *huart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(huart); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_UARTEx_WakeupCallback can be implemented in the user file. + */ +} + +#if defined(USART_CR1_FIFOEN) +/** + * @brief UART RX Fifo full callback. + * @param huart UART handle. + * @retval None + */ +__weak void HAL_UARTEx_RxFifoFullCallback(UART_HandleTypeDef *huart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(huart); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_UARTEx_RxFifoFullCallback can be implemented in the user file. + */ +} + +/** + * @brief UART TX Fifo empty callback. + * @param huart UART handle. + * @retval None + */ +__weak void HAL_UARTEx_TxFifoEmptyCallback(UART_HandleTypeDef *huart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(huart); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_UARTEx_TxFifoEmptyCallback can be implemented in the user file. + */ +} +#endif /* USART_CR1_FIFOEN */ + +/** + * @} + */ + +/** @defgroup UARTEx_Exported_Functions_Group3 Peripheral Control functions + * @brief Extended Peripheral Control functions + * +@verbatim + =============================================================================== + ##### Peripheral Control functions ##### + =============================================================================== + [..] This section provides the following functions: + (+) HAL_UARTEx_EnableClockStopMode() API enables the UART clock (HSI or LSE only) during stop mode + (+) HAL_UARTEx_DisableClockStopMode() API disables the above functionality + (+) HAL_MultiProcessorEx_AddressLength_Set() API optionally sets the UART node address + detection length to more than 4 bits for multiprocessor address mark wake up. + (+) HAL_UARTEx_StopModeWakeUpSourceConfig() API defines the wake-up from stop mode + trigger: address match, Start Bit detection or RXNE bit status. + (+) HAL_UARTEx_EnableStopMode() API enables the UART to wake up the MCU from stop mode + (+) HAL_UARTEx_DisableStopMode() API disables the above functionality + (+) HAL_UARTEx_EnableFifoMode() API enables the FIFO mode + (+) HAL_UARTEx_DisableFifoMode() API disables the FIFO mode + (+) HAL_UARTEx_SetTxFifoThreshold() API sets the TX FIFO threshold + (+) HAL_UARTEx_SetRxFifoThreshold() API sets the RX FIFO threshold + + [..] This subsection also provides a set of additional functions providing enhanced reception + services to user. (For example, these functions allow application to handle use cases + where number of data to be received is unknown). + + (#) Compared to standard reception services which only consider number of received + data elements as reception completion criteria, these functions also consider additional events + as triggers for updating reception status to caller : + (+) Detection of inactivity period (RX line has not been active for a given period). + (++) RX inactivity detected by IDLE event, i.e. RX line has been in idle state (normally high state) + for 1 frame time, after last received byte. + (++) RX inactivity detected by RTO, i.e. line has been in idle state + for a programmable time, after last received byte. + (+) Detection that a specific character has been received. + + (#) There are two mode of transfer: + (+) Blocking mode: The reception is performed in polling mode, until either expected number of data is received, + or till IDLE event occurs. Reception is handled only during function execution. + When function exits, no data reception could occur. HAL status and number of actually received data elements, + are returned by function after finishing transfer. + (+) Non-Blocking mode: The reception is performed using Interrupts or DMA. + These API's return the HAL status. + The end of the data processing will be indicated through the + dedicated UART IRQ when using Interrupt mode or the DMA IRQ when using DMA mode. + The HAL_UARTEx_RxEventCallback() user callback will be executed during Receive process + The HAL_UART_ErrorCallback()user callback will be executed when a reception error is detected. + + (#) Blocking mode API: + (+) HAL_UARTEx_ReceiveToIdle() + + (#) Non-Blocking mode API with Interrupt: + (+) HAL_UARTEx_ReceiveToIdle_IT() + + (#) Non-Blocking mode API with DMA: + (+) HAL_UARTEx_ReceiveToIdle_DMA() + +@endverbatim + * @{ + */ + +#if defined(USART_CR3_UCESM) +/** + * @brief Keep UART Clock enabled when in Stop Mode. + * @note When the USART clock source is configured to be LSE or HSI, it is possible to keep enabled + * this clock during STOP mode by setting the UCESM bit in USART_CR3 control register. + * @note When LPUART is used to wakeup from stop with LSE is selected as LPUART clock source, + * and desired baud rate is 9600 baud, the bit UCESM bit in LPUART_CR3 control register must be set. + * @param huart UART handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UARTEx_EnableClockStopMode(UART_HandleTypeDef *huart) +{ + /* Process Locked */ + __HAL_LOCK(huart); + + /* Set UCESM bit */ + ATOMIC_SET_BIT(huart->Instance->CR3, USART_CR3_UCESM); + + /* Process Unlocked */ + __HAL_UNLOCK(huart); + + return HAL_OK; +} + +/** + * @brief Disable UART Clock when in Stop Mode. + * @param huart UART handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UARTEx_DisableClockStopMode(UART_HandleTypeDef *huart) +{ + /* Process Locked */ + __HAL_LOCK(huart); + + /* Clear UCESM bit */ + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_UCESM); + + /* Process Unlocked */ + __HAL_UNLOCK(huart); + + return HAL_OK; +} + +#endif /* USART_CR3_UCESM */ +/** + * @brief By default in multiprocessor mode, when the wake up method is set + * to address mark, the UART handles only 4-bit long addresses detection; + * this API allows to enable longer addresses detection (6-, 7- or 8-bit + * long). + * @note Addresses detection lengths are: 6-bit address detection in 7-bit data mode, + * 7-bit address detection in 8-bit data mode, 8-bit address detection in 9-bit data mode. + * @param huart UART handle. + * @param AddressLength This parameter can be one of the following values: + * @arg @ref UART_ADDRESS_DETECT_4B 4-bit long address + * @arg @ref UART_ADDRESS_DETECT_7B 6-, 7- or 8-bit long address + * @retval HAL status + */ +HAL_StatusTypeDef HAL_MultiProcessorEx_AddressLength_Set(UART_HandleTypeDef *huart, uint32_t AddressLength) +{ + /* Check the UART handle allocation */ + if (huart == NULL) + { + return HAL_ERROR; + } + + /* Check the address length parameter */ + assert_param(IS_UART_ADDRESSLENGTH_DETECT(AddressLength)); + + huart->gState = HAL_UART_STATE_BUSY; + + /* Disable the Peripheral */ + __HAL_UART_DISABLE(huart); + + /* Set the address length */ + MODIFY_REG(huart->Instance->CR2, USART_CR2_ADDM7, AddressLength); + + /* Enable the Peripheral */ + __HAL_UART_ENABLE(huart); + + /* TEACK and/or REACK to check before moving huart->gState to Ready */ + return (UART_CheckIdleState(huart)); +} + +/** + * @brief Set Wakeup from Stop mode interrupt flag selection. + * @note It is the application responsibility to enable the interrupt used as + * usart_wkup interrupt source before entering low-power mode. + * @param huart UART handle. + * @param WakeUpSelection Address match, Start Bit detection or RXNE/RXFNE bit status. + * This parameter can be one of the following values: + * @arg @ref UART_WAKEUP_ON_ADDRESS + * @arg @ref UART_WAKEUP_ON_STARTBIT + * @arg @ref UART_WAKEUP_ON_READDATA_NONEMPTY + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UARTEx_StopModeWakeUpSourceConfig(UART_HandleTypeDef *huart, UART_WakeUpTypeDef WakeUpSelection) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t tickstart; + + /* check the wake-up from stop mode UART instance */ + assert_param(IS_UART_WAKEUP_FROMSTOP_INSTANCE(huart->Instance)); + /* check the wake-up selection parameter */ + assert_param(IS_UART_WAKEUP_SELECTION(WakeUpSelection.WakeUpEvent)); + + /* Process Locked */ + __HAL_LOCK(huart); + + huart->gState = HAL_UART_STATE_BUSY; + + /* Disable the Peripheral */ + __HAL_UART_DISABLE(huart); + + /* Set the wake-up selection scheme */ + MODIFY_REG(huart->Instance->CR3, USART_CR3_WUS, WakeUpSelection.WakeUpEvent); + + if (WakeUpSelection.WakeUpEvent == UART_WAKEUP_ON_ADDRESS) + { + UARTEx_Wakeup_AddressConfig(huart, WakeUpSelection); + } + + /* Enable the Peripheral */ + __HAL_UART_ENABLE(huart); + + /* Init tickstart for timeout management */ + tickstart = HAL_GetTick(); + + /* Wait until REACK flag is set */ + if (UART_WaitOnFlagUntilTimeout(huart, USART_ISR_REACK, RESET, tickstart, HAL_UART_TIMEOUT_VALUE) != HAL_OK) + { + status = HAL_TIMEOUT; + } + else + { + /* Initialize the UART State */ + huart->gState = HAL_UART_STATE_READY; + } + + /* Process Unlocked */ + __HAL_UNLOCK(huart); + + return status; +} + +/** + * @brief Enable UART Stop Mode. + * @note The UART is able to wake up the MCU from Stop 1 mode as long as UART clock is HSI or LSE. + * @param huart UART handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UARTEx_EnableStopMode(UART_HandleTypeDef *huart) +{ + /* Process Locked */ + __HAL_LOCK(huart); + + /* Set UESM bit */ + ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_UESM); + + /* Process Unlocked */ + __HAL_UNLOCK(huart); + + return HAL_OK; +} + +/** + * @brief Disable UART Stop Mode. + * @param huart UART handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UARTEx_DisableStopMode(UART_HandleTypeDef *huart) +{ + /* Process Locked */ + __HAL_LOCK(huart); + + /* Clear UESM bit */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_UESM); + + /* Process Unlocked */ + __HAL_UNLOCK(huart); + + return HAL_OK; +} + +#if defined(USART_CR1_FIFOEN) +/** + * @brief Enable the FIFO mode. + * @param huart UART handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UARTEx_EnableFifoMode(UART_HandleTypeDef *huart) +{ + uint32_t tmpcr1; + + /* Check parameters */ + assert_param(IS_UART_FIFO_INSTANCE(huart->Instance)); + + /* Process Locked */ + __HAL_LOCK(huart); + + huart->gState = HAL_UART_STATE_BUSY; + + /* Save actual UART configuration */ + tmpcr1 = READ_REG(huart->Instance->CR1); + + /* Disable UART */ + __HAL_UART_DISABLE(huart); + + /* Enable FIFO mode */ + SET_BIT(tmpcr1, USART_CR1_FIFOEN); + huart->FifoMode = UART_FIFOMODE_ENABLE; + + /* Restore UART configuration */ + WRITE_REG(huart->Instance->CR1, tmpcr1); + + /* Determine the number of data to process during RX/TX ISR execution */ + UARTEx_SetNbDataToProcess(huart); + + huart->gState = HAL_UART_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(huart); + + return HAL_OK; +} + +/** + * @brief Disable the FIFO mode. + * @param huart UART handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UARTEx_DisableFifoMode(UART_HandleTypeDef *huart) +{ + uint32_t tmpcr1; + + /* Check parameters */ + assert_param(IS_UART_FIFO_INSTANCE(huart->Instance)); + + /* Process Locked */ + __HAL_LOCK(huart); + + huart->gState = HAL_UART_STATE_BUSY; + + /* Save actual UART configuration */ + tmpcr1 = READ_REG(huart->Instance->CR1); + + /* Disable UART */ + __HAL_UART_DISABLE(huart); + + /* Disable FIFO mode */ + CLEAR_BIT(tmpcr1, USART_CR1_FIFOEN); + huart->FifoMode = UART_FIFOMODE_DISABLE; + + /* Restore UART configuration */ + WRITE_REG(huart->Instance->CR1, tmpcr1); + + huart->gState = HAL_UART_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(huart); + + return HAL_OK; +} + +/** + * @brief Set the TXFIFO threshold. + * @param huart UART handle. + * @param Threshold TX FIFO threshold value + * This parameter can be one of the following values: + * @arg @ref UART_TXFIFO_THRESHOLD_1_8 + * @arg @ref UART_TXFIFO_THRESHOLD_1_4 + * @arg @ref UART_TXFIFO_THRESHOLD_1_2 + * @arg @ref UART_TXFIFO_THRESHOLD_3_4 + * @arg @ref UART_TXFIFO_THRESHOLD_7_8 + * @arg @ref UART_TXFIFO_THRESHOLD_8_8 + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UARTEx_SetTxFifoThreshold(UART_HandleTypeDef *huart, uint32_t Threshold) +{ + uint32_t tmpcr1; + + /* Check parameters */ + assert_param(IS_UART_FIFO_INSTANCE(huart->Instance)); + assert_param(IS_UART_TXFIFO_THRESHOLD(Threshold)); + + /* Process Locked */ + __HAL_LOCK(huart); + + huart->gState = HAL_UART_STATE_BUSY; + + /* Save actual UART configuration */ + tmpcr1 = READ_REG(huart->Instance->CR1); + + /* Disable UART */ + __HAL_UART_DISABLE(huart); + + /* Update TX threshold configuration */ + MODIFY_REG(huart->Instance->CR3, USART_CR3_TXFTCFG, Threshold); + + /* Determine the number of data to process during RX/TX ISR execution */ + UARTEx_SetNbDataToProcess(huart); + + /* Restore UART configuration */ + WRITE_REG(huart->Instance->CR1, tmpcr1); + + huart->gState = HAL_UART_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(huart); + + return HAL_OK; +} + +/** + * @brief Set the RXFIFO threshold. + * @param huart UART handle. + * @param Threshold RX FIFO threshold value + * This parameter can be one of the following values: + * @arg @ref UART_RXFIFO_THRESHOLD_1_8 + * @arg @ref UART_RXFIFO_THRESHOLD_1_4 + * @arg @ref UART_RXFIFO_THRESHOLD_1_2 + * @arg @ref UART_RXFIFO_THRESHOLD_3_4 + * @arg @ref UART_RXFIFO_THRESHOLD_7_8 + * @arg @ref UART_RXFIFO_THRESHOLD_8_8 + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UARTEx_SetRxFifoThreshold(UART_HandleTypeDef *huart, uint32_t Threshold) +{ + uint32_t tmpcr1; + + /* Check the parameters */ + assert_param(IS_UART_FIFO_INSTANCE(huart->Instance)); + assert_param(IS_UART_RXFIFO_THRESHOLD(Threshold)); + + /* Process Locked */ + __HAL_LOCK(huart); + + huart->gState = HAL_UART_STATE_BUSY; + + /* Save actual UART configuration */ + tmpcr1 = READ_REG(huart->Instance->CR1); + + /* Disable UART */ + __HAL_UART_DISABLE(huart); + + /* Update RX threshold configuration */ + MODIFY_REG(huart->Instance->CR3, USART_CR3_RXFTCFG, Threshold); + + /* Determine the number of data to process during RX/TX ISR execution */ + UARTEx_SetNbDataToProcess(huart); + + /* Restore UART configuration */ + WRITE_REG(huart->Instance->CR1, tmpcr1); + + huart->gState = HAL_UART_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(huart); + + return HAL_OK; +} + +#endif /* USART_CR1_FIFOEN */ +/** + * @brief Receive an amount of data in blocking mode till either the expected number of data + * is received or an IDLE event occurs. + * @note HAL_OK is returned if reception is completed (expected number of data has been received) + * or if reception is stopped after IDLE event (less than the expected number of data has been received) + * In this case, RxLen output parameter indicates number of data available in reception buffer. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the received data is handled as a set of uint16_t. In this case, Size must indicate the number + * of uint16_t available through pData. + * @note When FIFO mode is enabled, the RXFNE flag is set as long as the RXFIFO + * is not empty. Read operations from the RDR register are performed when + * RXFNE flag is set. From hardware perspective, RXFNE flag and + * RXNE are mapped on the same bit-field. + * @param huart UART handle. + * @param pData Pointer to data buffer (uint8_t or uint16_t data elements). + * @param Size Amount of data elements (uint8_t or uint16_t) to be received. + * @param RxLen Number of data elements finally received + * (could be lower than Size, in case reception ends on IDLE event) + * @param Timeout Timeout duration expressed in ms (covers the whole reception sequence). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint16_t *RxLen, + uint32_t Timeout) +{ + uint8_t *pdata8bits; + uint16_t *pdata16bits; + uint16_t uhMask; + uint32_t tickstart; + + /* Check that a Rx process is not already ongoing */ + if (huart->RxState == HAL_UART_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + huart->ErrorCode = HAL_UART_ERROR_NONE; + huart->RxState = HAL_UART_STATE_BUSY_RX; + huart->ReceptionType = HAL_UART_RECEPTION_TOIDLE; + huart->RxEventType = HAL_UART_RXEVENT_TC; + + /* Init tickstart for timeout management */ + tickstart = HAL_GetTick(); + + huart->RxXferSize = Size; + huart->RxXferCount = Size; + + /* Computation of UART mask to apply to RDR register */ + UART_MASK_COMPUTATION(huart); + uhMask = huart->Mask; + + /* In case of 9bits/No Parity transfer, pRxData needs to be handled as a uint16_t pointer */ + if ((huart->Init.WordLength == UART_WORDLENGTH_9B) && (huart->Init.Parity == UART_PARITY_NONE)) + { + pdata8bits = NULL; + pdata16bits = (uint16_t *) pData; + } + else + { + pdata8bits = pData; + pdata16bits = NULL; + } + + /* Initialize output number of received elements */ + *RxLen = 0U; + + /* as long as data have to be received */ + while (huart->RxXferCount > 0U) + { + /* Check if IDLE flag is set */ + if (__HAL_UART_GET_FLAG(huart, UART_FLAG_IDLE)) + { + /* Clear IDLE flag in ISR */ + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_IDLEF); + + /* If Set, but no data ever received, clear flag without exiting loop */ + /* If Set, and data has already been received, this means Idle Event is valid : End reception */ + if (*RxLen > 0U) + { + huart->RxEventType = HAL_UART_RXEVENT_IDLE; + huart->RxState = HAL_UART_STATE_READY; + + return HAL_OK; + } + } + + /* Check if RXNE flag is set */ + if (__HAL_UART_GET_FLAG(huart, UART_FLAG_RXNE)) + { + if (pdata8bits == NULL) + { + *pdata16bits = (uint16_t)(huart->Instance->RDR & uhMask); + pdata16bits++; + } + else + { + *pdata8bits = (uint8_t)(huart->Instance->RDR & (uint8_t)uhMask); + pdata8bits++; + } + /* Increment number of received elements */ + *RxLen += 1U; + huart->RxXferCount--; + } + + /* Check for the Timeout */ + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U)) + { + huart->RxState = HAL_UART_STATE_READY; + + return HAL_TIMEOUT; + } + } + } + + /* Set number of received elements in output parameter : RxLen */ + *RxLen = huart->RxXferSize - huart->RxXferCount; + /* At end of Rx process, restore huart->RxState to Ready */ + huart->RxState = HAL_UART_STATE_READY; + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive an amount of data in interrupt mode till either the expected number of data + * is received or an IDLE event occurs. + * @note Reception is initiated by this function call. Further progress of reception is achieved thanks + * to UART interrupts raised by RXNE and IDLE events. Callback is called at end of reception indicating + * number of received data elements. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the received data is handled as a set of uint16_t. In this case, Size must indicate the number + * of uint16_t available through pData. + * @param huart UART handle. + * @param pData Pointer to data buffer (uint8_t or uint16_t data elements). + * @param Size Amount of data elements (uint8_t or uint16_t) to be received. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check that a Rx process is not already ongoing */ + if (huart->RxState == HAL_UART_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* Set Reception type to reception till IDLE Event*/ + huart->ReceptionType = HAL_UART_RECEPTION_TOIDLE; + huart->RxEventType = HAL_UART_RXEVENT_TC; + + (void)UART_Start_Receive_IT(huart, pData, Size); + + if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) + { + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_IDLEF); + ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_IDLEIE); + } + else + { + /* In case of errors already pending when reception is started, + Interrupts may have already been raised and lead to reception abortion. + (Overrun error for instance). + In such case Reception Type has been reset to HAL_UART_RECEPTION_STANDARD. */ + status = HAL_ERROR; + } + + return status; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive an amount of data in DMA mode till either the expected number + * of data is received or an IDLE event occurs. + * @note Reception is initiated by this function call. Further progress of reception is achieved thanks + * to DMA services, transferring automatically received data elements in user reception buffer and + * calling registered callbacks at half/end of reception. UART IDLE events are also used to consider + * reception phase as ended. In all cases, callback execution will indicate number of received data elements. + * @note When the UART parity is enabled (PCE = 1), the received data contain + * the parity bit (MSB position). + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the received data is handled as a set of uint16_t. In this case, Size must indicate the number + * of uint16_t available through pData. + * @param huart UART handle. + * @param pData Pointer to data buffer (uint8_t or uint16_t data elements). + * @param Size Amount of data elements (uint8_t or uint16_t) to be received. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size) +{ + HAL_StatusTypeDef status; + + /* Check that a Rx process is not already ongoing */ + if (huart->RxState == HAL_UART_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* Set Reception type to reception till IDLE Event*/ + huart->ReceptionType = HAL_UART_RECEPTION_TOIDLE; + huart->RxEventType = HAL_UART_RXEVENT_TC; + + status = UART_Start_Receive_DMA(huart, pData, Size); + + /* Check Rx process has been successfully started */ + if (status == HAL_OK) + { + if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) + { + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_IDLEF); + ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_IDLEIE); + } + else + { + /* In case of errors already pending when reception is started, + Interrupts may have already been raised and lead to reception abortion. + (Overrun error for instance). + In such case Reception Type has been reset to HAL_UART_RECEPTION_STANDARD. */ + status = HAL_ERROR; + } + } + + return status; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Provide Rx Event type that has lead to RxEvent callback execution. + * @note When HAL_UARTEx_ReceiveToIdle_IT() or HAL_UARTEx_ReceiveToIdle_DMA() API are called, progress + * of reception process is provided to application through calls of Rx Event callback (either default one + * HAL_UARTEx_RxEventCallback() or user registered one). As several types of events could occur (IDLE event, + * Half Transfer, or Transfer Complete), this function allows to retrieve the Rx Event type that has lead + * to Rx Event callback execution. + * @note This function is expected to be called within the user implementation of Rx Event Callback, + * in order to provide the accurate value : + * In Interrupt Mode : + * - HAL_UART_RXEVENT_TC : when Reception has been completed (expected nb of data has been received) + * - HAL_UART_RXEVENT_IDLE : when Idle event occurred prior reception has been completed (nb of + * received data is lower than expected one) + * In DMA Mode : + * - HAL_UART_RXEVENT_TC : when Reception has been completed (expected nb of data has been received) + * - HAL_UART_RXEVENT_HT : when half of expected nb of data has been received + * - HAL_UART_RXEVENT_IDLE : when Idle event occurred prior reception has been completed (nb of + * received data is lower than expected one). + * In DMA mode, RxEvent callback could be called several times; + * When DMA is configured in Normal Mode, HT event does not stop Reception process; + * When DMA is configured in Circular Mode, HT, TC or IDLE events don't stop Reception process; + * @param huart UART handle. + * @retval Rx Event Type (return vale will be a value of @ref UART_RxEvent_Type_Values) + */ +HAL_UART_RxEventTypeTypeDef HAL_UARTEx_GetRxEventType(const UART_HandleTypeDef *huart) +{ + /* Return Rx Event type value, as stored in UART handle */ + return (huart->RxEventType); +} + +/** + * @} + */ + +/** + * @} + */ + +/** @addtogroup UARTEx_Private_Functions + * @{ + */ + +/** + * @brief Initialize the UART wake-up from stop mode parameters when triggered by address detection. + * @param huart UART handle. + * @param WakeUpSelection UART wake up from stop mode parameters. + * @retval None + */ +static void UARTEx_Wakeup_AddressConfig(UART_HandleTypeDef *huart, UART_WakeUpTypeDef WakeUpSelection) +{ + assert_param(IS_UART_ADDRESSLENGTH_DETECT(WakeUpSelection.AddressLength)); + + /* Set the USART address length */ + MODIFY_REG(huart->Instance->CR2, USART_CR2_ADDM7, WakeUpSelection.AddressLength); + + /* Set the USART address node */ + MODIFY_REG(huart->Instance->CR2, USART_CR2_ADD, ((uint32_t)WakeUpSelection.Address << UART_CR2_ADDRESS_LSB_POS)); +} + +#if defined(USART_CR1_FIFOEN) +/** + * @brief Calculate the number of data to process in RX/TX ISR. + * @note The RX FIFO depth and the TX FIFO depth is extracted from + * the UART configuration registers. + * @param huart UART handle. + * @retval None + */ +static void UARTEx_SetNbDataToProcess(UART_HandleTypeDef *huart) +{ + uint8_t rx_fifo_depth; + uint8_t tx_fifo_depth; + uint8_t rx_fifo_threshold; + uint8_t tx_fifo_threshold; + static const uint8_t numerator[] = {1U, 1U, 1U, 3U, 7U, 1U, 0U, 0U}; + static const uint8_t denominator[] = {8U, 4U, 2U, 4U, 8U, 1U, 1U, 1U}; + + if (huart->FifoMode == UART_FIFOMODE_DISABLE) + { + huart->NbTxDataToProcess = 1U; + huart->NbRxDataToProcess = 1U; + } + else + { + rx_fifo_depth = RX_FIFO_DEPTH; + tx_fifo_depth = TX_FIFO_DEPTH; + rx_fifo_threshold = (uint8_t)(READ_BIT(huart->Instance->CR3, USART_CR3_RXFTCFG) >> USART_CR3_RXFTCFG_Pos); + tx_fifo_threshold = (uint8_t)(READ_BIT(huart->Instance->CR3, USART_CR3_TXFTCFG) >> USART_CR3_TXFTCFG_Pos); + huart->NbTxDataToProcess = ((uint16_t)tx_fifo_depth * numerator[tx_fifo_threshold]) / + (uint16_t)denominator[tx_fifo_threshold]; + huart->NbRxDataToProcess = ((uint16_t)rx_fifo_depth * numerator[rx_fifo_threshold]) / + (uint16_t)denominator[rx_fifo_threshold]; + } +} +#endif /* USART_CR1_FIFOEN */ +/** + * @} + */ + +#endif /* HAL_UART_MODULE_ENABLED */ + +/** + * @} + */ + +/** + * @} + */ + diff --git a/CablePositioning_IAP_V1.0/EWARM/CableMonitor_V3.2.dep b/CablePositioning_IAP_V1.0/EWARM/CableMonitor_V3.2.dep index 04ca7f2..1976b82 100644 --- a/CablePositioning_IAP_V1.0/EWARM/CableMonitor_V3.2.dep +++ b/CablePositioning_IAP_V1.0/EWARM/CableMonitor_V3.2.dep @@ -1,373 +1,434 @@ 4 - 152886559 + 2536296343 CableMonitor_V3.2 - $PROJ_DIR$\..\Inc\stm32l4xx_hal_conf.h - $PROJ_DIR$\CableMonitor_V3.2\Obj\stm32l4xx_it.pbi + $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_uart.c + $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_tim_ex.c $PROJ_DIR$\CableMonitor_V3.2\Obj\system_stm32l4xx.o - $PROJ_DIR$\..\Inc\ymodem.h - $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_spi_ex.h - $PROJ_DIR$\CableMonitor_V3.2\Obj\stm32l4xx_hal.pbi $PROJ_DIR$\CableMonitor_V3.2\Obj\common.o - $PROJ_DIR$\CableMonitor_V3.2\Obj\stm32l4xx_hal_cortex.o - $PROJ_DIR$\..\Inc\flash_if.h - $TOOLKIT_DIR$\inc\c\stdio.h - $PROJ_DIR$\CableMonitor_V3.2\Obj\stm32l4xx_hal_pwr_ex.pbi - $TOOLKIT_DIR$\inc\c\DLib_Product_string.h - $PROJ_DIR$\CableMonitor_V3.2\Obj\stm32l4xx_hal_rcc_ex.o - $PROJ_DIR$\CableMonitor_V3.2\Obj\stm32l4xx_hal_msp.o - $PROJ_DIR$\CableMonitor_V3.2\Obj\stm32l4xx_hal.o - $TOOLKIT_DIR$\inc\c\string.h - $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_pwr_ex.h - $PROJ_DIR$\CableMonitor_V3.2\Obj\stm32l4xx_hal_flash_ramfunc.o - $PROJ_DIR$\CableMonitor_V3.2\Obj\stm32l4xx_hal_rcc.pbi - $PROJ_DIR$\CableMonitor_V3.2\Obj\stm32l4xx_hal_dma_ex.o - $PROJ_DIR$\stm32l496xx_flash.icf - $PROJ_DIR$\CableMonitor_V3.2\Obj\ymodem.pbi - $TOOLKIT_DIR$\inc\c\stddef.h - $PROJ_DIR$\CableMonitor_V3.2\Obj\stm32l4xx_hal_dma.o - $PROJ_DIR$\CableMonitor_V3.2\Obj\stm32l4xx_hal_spi.pbi - $PROJ_DIR$\..\Inc\main.h - $PROJ_DIR$\CableMonitor_V3.2\Obj\stm32l4xx_hal_spi_ex.o - $TOOLKIT_DIR$\inc\c\DLib_Config_Full.h - $PROJ_DIR$\..\Drivers\CMSIS\Device\ST\STM32L4xx\Include\stm32l496xx.h - $PROJ_DIR$\CableMonitor_V3.2\Obj\stm32l4xx_hal_uart.o - $TOOLKIT_DIR$\lib\rt7M_tl.a - $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_tim.h - $PROJ_DIR$\CableMonitor_V3.2\Obj\startup_stm32l496xx.o - $PROJ_DIR$\CableMonitor_V3.2\Obj\stm32l4xx_hal_flash_ramfunc.pbi - $PROJ_DIR$\CableMonitor_V3.2\Obj\stm32l4xx_hal_pwr.o - $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_pwr.h - $PROJ_DIR$\..\Drivers\CMSIS\Include\mpu_armv7.h - $PROJ_DIR$\CableMonitor_V3.2\Obj\stm32l4xx_hal_gpio.pbi - $PROJ_DIR$\CableMonitor_V3.2\Obj\stm32l4xx_hal_uart.pbi - $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_flash.h - $PROJ_DIR$\CableMonitor_V3.2\Obj\common.pbi - $PROJ_DIR$\CableMonitor_V3.2\Obj\stm32l4xx_hal_spi_ex.pbi - $TOOLKIT_DIR$\inc\c\ycheck.h - $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Inc\Legacy\stm32_hal_legacy.h - $PROJ_DIR$\CableMonitor_V3.2\Obj\stm32l4xx_hal_spi.o - $PROJ_DIR$\CableMonitor_V3.2\Obj\stm32l4xx_hal_tim.pbi + $TOOLKIT_DIR$\lib\m7M_tls.a $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_uart.h - $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_flash_ex.h - $PROJ_DIR$\CableMonitor_V3.2\Obj\stm32l4xx_hal_i2c.pbi - $PROJ_DIR$\CableMonitor_V3.2\Obj\stm32l4xx_hal_gpio.o - $PROJ_DIR$\CableMonitor_V3.2\List\CableMonitor_V3.2.map - $PROJ_DIR$\CableMonitor_V3.2\Obj\stm32l4xx_hal_msp.pbi - $PROJ_DIR$\CableMonitor_V3.2\Obj\main.o + $PROJ_DIR$\CableMonitor_V3.2\Obj\common.pbi + $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_rcc.h + $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_dma_ex.c $PROJ_DIR$\CableMonitor_V3.2\Exe\CableMonitor_V3.2.bin - $PROJ_DIR$\CableMonitor_V3.2\Obj\CableMonitor_V3.2.pbd - $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_i2c_ex.h + $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_spi_ex.h + $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_cortex.c + $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_gpio.c + $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_tim.c + $PROJ_DIR$\CableMonitor_V3.2\Obj\stm32l4xx_hal.pbi $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_gpio_ex.h - $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_rcc.h - $TOOLKIT_DIR$\lib\m7M_tls.a - $TOOLKIT_DIR$\inc\c\iccarm_builtin.h $PROJ_DIR$\CableMonitor_V3.2\Obj\stm32l4xx_hal_cortex.pbi - $PROJ_DIR$\CableMonitor_V3.2\Obj\flash_if.o $TOOLKIT_DIR$\lib\shb_l.a - $TOOLKIT_DIR$\inc\c\DLib_Defaults.h - $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_dma_ex.c - $TOOLKIT_DIR$\inc\c\stdint.h + $PROJ_DIR$\CableMonitor_V3.2\Obj\CableMonitor_V3.2.pbd + $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_exti.c $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_i2c_ex.c - $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_spi.c + $PROJ_DIR$\..\Inc\ymodem.h + $PROJ_DIR$\CableMonitor_V3.2\Obj\stm32l4xx_it.pbi $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_pwr.c - $PROJ_DIR$\..\Src\stm32l4xx_it.c - $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_exti.c - $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_flash_ex.c - $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_tim_ex.c - $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_flash_ramfunc.h - $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_pwr_ex.c $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_uart_ex.c $PROJ_DIR$\CableMonitor_V3.2\Obj\ymodem.o - $PROJ_DIR$\..\Src\system_stm32l4xx.c + $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_i2c.c $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_dma.c - $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_uart_ex.h - $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_dma.h $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_flash_ramfunc.c - $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_i2c.c - $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_uart.c + $TOOLKIT_DIR$\inc\c\stdint.h + $PROJ_DIR$\CableMonitor_V3.2\Obj\stm32l4xx_hal_tim.pbi + $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_pwr_ex.c + $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal.c + $PROJ_DIR$\..\Src\common.c + $PROJ_DIR$\..\Src\flash_if.c + $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_rcc.c + $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_rcc_ex.c $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_flash.c - $PROJ_DIR$\CableMonitor_V3.2\Obj\stm32l4xx_hal_flash_ex.pbi $PROJ_DIR$\..\Src\stm32l4xx_hal_msp.c - $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_rcc_ex.c - $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal.c - $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_gpio.c + $PROJ_DIR$\..\Src\system_stm32l4xx.c $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_spi_ex.c - $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_rcc.c - $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_cortex.c - $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_tim.c - $PROJ_DIR$\CableMonitor_V3.2\Exe\CableMonitor_V3.2.out - $PROJ_DIR$\..\Src\flash_if.c + $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_flash_ex.c + $PROJ_DIR$\startup_stm32l496xx.s $PROJ_DIR$\..\Src\ymodem.c + $PROJ_DIR$\..\Src\stm32l4xx_it.c $PROJ_DIR$\..\Src\main.c + $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_spi.c $PROJ_DIR$\..\Src\menu.c - $PROJ_DIR$\startup_stm32l496xx.s - $PROJ_DIR$\..\Src\common.c - $TOOLKIT_DIR$\inc\c\yvals.h - $PROJ_DIR$\..\Drivers\CMSIS\Device\ST\STM32L4xx\Include\stm32l4xx.h - $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_def.h - $PROJ_DIR$\CableMonitor_V3.2\Obj\stm32l4xx_hal_i2c.o - $PROJ_DIR$\CableMonitor_V3.2\Obj\stm32l4xx_hal_rcc_ex.pbi + $PROJ_DIR$\CableMonitor_V3.2\Obj\stm32l4xx_hal_pwr.o + $PROJ_DIR$\..\Drivers\CMSIS\Device\ST\STM32L4xx\Include\stm32l496xx.h + $PROJ_DIR$\CableMonitor_V3.2\Obj\stm32l4xx_hal.o + $PROJ_DIR$\CableMonitor_V3.2\Obj\stm32l4xx_hal_dma.o + $PROJ_DIR$\..\Inc\main.h $PROJ_DIR$\..\Drivers\CMSIS\Include\cmsis_version.h - $PROJ_DIR$\CableMonitor_V3.2\Obj\main.pbi + $TOOLKIT_DIR$\inc\c\stdio.h + $PROJ_DIR$\CableMonitor_V3.2\Obj\stm32l4xx_hal_spi.o + $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_pwr.h + $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_exti.h + $PROJ_DIR$\CableMonitor_V3.2\Obj\stm32l4xx_hal_flash_ramfunc.pbi + $TOOLKIT_DIR$\lib\rt7M_tl.a + $PROJ_DIR$\CableMonitor_V3.2\Obj\stm32l4xx_hal_rcc.pbi + $PROJ_DIR$\..\Inc\flash_if.h + $PROJ_DIR$\..\Inc\stm32l4xx_it.h $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_cortex.h - $PROJ_DIR$\CableMonitor_V3.2\Obj\stm32l4xx_hal_rcc.o - $PROJ_DIR$\CableMonitor_V3.2\Obj\menu.pbi - $PROJ_DIR$\CableMonitor_V3.2\Obj\stm32l4xx_hal_pwr_ex.o - $TOOLKIT_DIR$\lib\dl7M_tlf.a - $PROJ_DIR$\CableMonitor_V3.2\Obj\stm32l4xx_hal_i2c_ex.o - $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_tim_ex.h - $PROJ_DIR$\..\Drivers\CMSIS\Include\cmsis_compiler.h - $PROJ_DIR$\CableMonitor_V3.2\Obj\stm32l4xx_hal_flash_ex.o - $PROJ_DIR$\CableMonitor_V3.2\Obj\system_stm32l4xx.pbi $TOOLKIT_DIR$\inc\c\stdarg.h + $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal.h + $PROJ_DIR$\CableMonitor_V3.2\Obj\stm32l4xx_hal_flash_ramfunc.o + $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_pwr_ex.h + $PROJ_DIR$\..\Inc\stm32l4xx_hal_conf.h $PROJ_DIR$\CableMonitor_V3.2\Obj\stm32l4xx_hal_dma_ex.pbi - $PROJ_DIR$\CableMonitor_V3.2\Obj\stm32l4xx_hal_i2c_ex.pbi + $PROJ_DIR$\CableMonitor_V3.2\Obj\stm32l4xx_hal_spi.pbi + $TOOLKIT_DIR$\lib\dl7M_tlf.a + $PROJ_DIR$\..\Drivers\CMSIS\Device\ST\STM32L4xx\Include\stm32l4xx.h + $TOOLKIT_DIR$\inc\c\stddef.h + $PROJ_DIR$\CableMonitor_V3.2\Obj\stm32l4xx_it.o + $PROJ_DIR$\CableMonitor_V3.2\Obj\startup_stm32l496xx.o + $PROJ_DIR$\CableMonitor_V3.2\Obj\stm32l4xx_hal_cortex.o + $PROJ_DIR$\stm32l496xx_flash.icf $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_rcc_ex.h - $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_exti.h - $PROJ_DIR$\CableMonitor_V3.2\Obj\stm32l4xx_hal_uart_ex.o - $PROJ_DIR$\CableMonitor_V3.2\Obj\stm32l4xx_hal_pwr.pbi - $PROJ_DIR$\CableMonitor_V3.2\Obj\stm32l4xx_hal_tim_ex.pbi + $PROJ_DIR$\CableMonitor_V3.2\Obj\stm32l4xx_hal_i2c.pbi + $TOOLKIT_DIR$\inc\c\DLib_Defaults.h + $TOOLKIT_DIR$\inc\c\string.h + $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_flash.h + $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Inc\Legacy\stm32_hal_legacy.h + $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_dma.h + $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_uart_ex.h + $PROJ_DIR$\CableMonitor_V3.2\List\CableMonitor_V3.2.map + $PROJ_DIR$\CableMonitor_V3.2\Obj\main.o + $PROJ_DIR$\CableMonitor_V3.2\Obj\stm32l4xx_hal_spi_ex.pbi + $TOOLKIT_DIR$\inc\c\ycheck.h + $PROJ_DIR$\CableMonitor_V3.2\Obj\stm32l4xx_hal_dma_ex.o + $PROJ_DIR$\CableMonitor_V3.2\Obj\stm32l4xx_hal_pwr_ex.pbi + $PROJ_DIR$\CableMonitor_V3.2\Obj\stm32l4xx_hal_rcc.o + $PROJ_DIR$\CableMonitor_V3.2\Obj\ymodem.pbi + $PROJ_DIR$\CableMonitor_V3.2\Obj\stm32l4xx_hal_msp.pbi + $PROJ_DIR$\CableMonitor_V3.2\Obj\stm32l4xx_hal_uart.pbi + $TOOLKIT_DIR$\inc\c\iccarm_builtin.h + $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_flash_ex.h + $TOOLKIT_DIR$\inc\c\DLib_Product_string.h $PROJ_DIR$\CableMonitor_V3.2\Obj\stm32l4xx_hal_flash.o - $TOOLKIT_DIR$\inc\c\DLib_Product.h - $PROJ_DIR$\..\Inc\stm32l4xx_it.h - $PROJ_DIR$\CableMonitor_V3.2\Obj\flash_if.pbi - $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal.h - $PROJ_DIR$\CableMonitor_V3.2\Obj\stm32l4xx_it.o - $PROJ_DIR$\..\Drivers\CMSIS\Include\core_cm4.h + $PROJ_DIR$\CableMonitor_V3.2\Obj\stm32l4xx_hal_rcc_ex.o + $PROJ_DIR$\CableMonitor_V3.2\Obj\stm32l4xx_hal_gpio.o + $PROJ_DIR$\CableMonitor_V3.2\Obj\stm32l4xx_hal_flash_ex.pbi + $PROJ_DIR$\CableMonitor_V3.2\Obj\flash_if.o + $PROJ_DIR$\CableMonitor_V3.2\Obj\stm32l4xx_hal_uart.o + $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_flash_ramfunc.h + $PROJ_DIR$\CableMonitor_V3.2\Obj\stm32l4xx_hal_gpio.pbi + $PROJ_DIR$\CableMonitor_V3.2\Obj\stm32l4xx_hal_spi_ex.o + $PROJ_DIR$\CableMonitor_V3.2\Obj\stm32l4xx_hal_msp.o + $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_gpio.h $PROJ_DIR$\CableMonitor_V3.2\Obj\menu.o - $PROJ_DIR$\..\Drivers\CMSIS\Device\ST\STM32L4xx\Include\system_stm32l4xx.h - $PROJ_DIR$\CableMonitor_V3.2\Obj\stm32l4xx_hal_dma.pbi - $PROJ_DIR$\CableMonitor_V3.2\Obj\stm32l4xx_hal_flash.pbi + $PROJ_DIR$\..\Drivers\CMSIS\Include\core_cm4.h + $PROJ_DIR$\CableMonitor_V3.2\Obj\stm32l4xx_hal_i2c_ex.o + $PROJ_DIR$\CableMonitor_V3.2\Obj\stm32l4xx_hal_flash_ex.o + $PROJ_DIR$\CableMonitor_V3.2\Obj\stm32l4xx_hal_pwr.pbi + $PROJ_DIR$\CableMonitor_V3.2\Obj\stm32l4xx_hal_uart_ex.o + $TOOLKIT_DIR$\inc\c\ysizet.h $PROJ_DIR$\CableMonitor_V3.2\Obj\stm32l4xx_hal_tim.o - $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_gpio.h - $PROJ_DIR$\..\Inc\common.h - $PROJ_DIR$\CableMonitor_V3.2\Obj\stm32l4xx_hal_exti.o - $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_spi.h - $PROJ_DIR$\..\Inc\menu.h - $PROJ_DIR$\CableMonitor_V3.2\Obj\stm32l4xx_hal_tim_ex.o + $PROJ_DIR$\CableMonitor_V3.2\Obj\menu.pbi + $PROJ_DIR$\CableMonitor_V3.2\Obj\stm32l4xx_hal_dma.pbi $PROJ_DIR$\CableMonitor_V3.2\Obj\stm32l4xx_hal_exti.pbi - $TOOLKIT_DIR$\inc\c\ysizet.h $PROJ_DIR$\CableMonitor_V3.2\Obj\stm32l4xx_hal_uart_ex.pbi + $PROJ_DIR$\CableMonitor_V3.2\Obj\flash_if.pbi + $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_spi.h + $PROJ_DIR$\CableMonitor_V3.2\Obj\stm32l4xx_hal_exti.o + $PROJ_DIR$\..\Inc\common.h + $PROJ_DIR$\CableMonitor_V3.2\Obj\system_stm32l4xx.pbi + $PROJ_DIR$\CableMonitor_V3.2\Obj\stm32l4xx_hal_tim_ex.pbi + $PROJ_DIR$\CableMonitor_V3.2\Obj\stm32l4xx_hal_tim_ex.o + $PROJ_DIR$\..\Drivers\CMSIS\Device\ST\STM32L4xx\Include\system_stm32l4xx.h + $TOOLKIT_DIR$\inc\c\DLib_Product.h + $PROJ_DIR$\CableMonitor_V3.2\Obj\stm32l4xx_hal_pwr_ex.o + $PROJ_DIR$\..\Drivers\CMSIS\Include\cmsis_compiler.h + $TOOLKIT_DIR$\inc\c\DLib_Config_Full.h + $PROJ_DIR$\..\Inc\menu.h + $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_def.h + $PROJ_DIR$\..\Drivers\CMSIS\Include\mpu_armv7.h + $TOOLKIT_DIR$\inc\c\yvals.h + $PROJ_DIR$\CableMonitor_V3.2\Obj\main.pbi + $PROJ_DIR$\CableMonitor_V3.2\Exe\CableMonitor_V3.2.out + $PROJ_DIR$\CableMonitor_V3.2\Obj\stm32l4xx_hal_rcc_ex.pbi $PROJ_DIR$\..\Drivers\CMSIS\Include\cmsis_iccarm.h - $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_i2c.h + $PROJ_DIR$\CableMonitor_V3.2\Obj\stm32l4xx_hal_i2c.o + $PROJ_DIR$\CableMonitor_V3.2\Obj\stm32l4xx_hal_i2c_ex.pbi + $PROJ_DIR$\CableMonitor_V3.2\Obj\stm32l4xx_hal_flash.pbi + $PROJ_DIR$\CableMonitor_V3.2\Obj\stm32l4xx_hal_spi.__cstat.et + $PROJ_DIR$\CableMonitor_V3.2\Obj\stm32l4xx_hal_spi_ex.__cstat.et + $PROJ_DIR$\CableMonitor_V3.2\Obj\stm32l4xx_hal_rcc_ex.__cstat.et + $PROJ_DIR$\CableMonitor_V3.2\Obj\stm32l4xx_hal_tim.__cstat.et + $PROJ_DIR$\CableMonitor_V3.2\Obj\stm32l4xx_hal_tim_ex.__cstat.et + $PROJ_DIR$\CableMonitor_V3.2\Obj\stm32l4xx_hal_flash.__cstat.et + $PROJ_DIR$\CableMonitor_V3.2\Obj\stm32l4xx_hal_flash_ex.__cstat.et + $PROJ_DIR$\CableMonitor_V3.2\Obj\stm32l4xx_hal_i2c_ex.__cstat.et + $PROJ_DIR$\CableMonitor_V3.2\Obj\menu.__cstat.et + $PROJ_DIR$\CableMonitor_V3.2\Obj\stm32l4xx_hal_msp.__cstat.et + $PROJ_DIR$\CableMonitor_V3.2\Obj\ymodem.__cstat.et + $PROJ_DIR$\CableMonitor_V3.2\Obj\flash_if.__cstat.et + $PROJ_DIR$\CableMonitor_V3.2\Obj\system_stm32l4xx.__cstat.et + $PROJ_DIR$\CableMonitor_V3.2\Obj\stm32l4xx_hal.__cstat.et + $PROJ_DIR$\CableMonitor_V3.2\Obj\common.__cstat.et + $PROJ_DIR$\CableMonitor_V3.2\Obj\stm32l4xx_it.__cstat.et + $PROJ_DIR$\CableMonitor_V3.2\Obj\stm32l4xx_hal_cortex.__cstat.et + $PROJ_DIR$\CableMonitor_V3.2\Obj\stm32l4xx_hal_dma.__cstat.et + $PROJ_DIR$\CableMonitor_V3.2\Obj\main.__cstat.et + $PROJ_DIR$\CableMonitor_V3.2\Obj\stm32l4xx_hal_exti.__cstat.et + $PROJ_DIR$\CableMonitor_V3.2\Obj\stm32l4xx_hal_flash_ramfunc.__cstat.et + $PROJ_DIR$\CableMonitor_V3.2\Obj\stm32l4xx_hal_gpio.__cstat.et + $PROJ_DIR$\CableMonitor_V3.2\Obj\stm32l4xx_hal_pwr.__cstat.et + $PROJ_DIR$\CableMonitor_V3.2\Obj\stm32l4xx_hal_dma_ex.__cstat.et + $PROJ_DIR$\CableMonitor_V3.2\Obj\stm32l4xx_hal_i2c.__cstat.et + $PROJ_DIR$\CableMonitor_V3.2\Obj\stm32l4xx_hal_pwr_ex.__cstat.et + $PROJ_DIR$\CableMonitor_V3.2\Obj\stm32l4xx_hal_rcc.__cstat.et + $PROJ_DIR$\CableMonitor_V3.2\Obj\stm32l4xx_hal_uart.__cstat.et + $PROJ_DIR$\CableMonitor_V3.2\Obj\stm32l4xx_hal_uart_ex.__cstat.et [ROOT_NODE] ILINK - 94 50 + 139 86 - $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_dma_ex.c + $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_uart.c ICCARM - 19 + 104 + + + __cstat + 172 BICOMP - 119 + 95 ICCARM - 130 0 57 103 102 28 132 65 42 101 63 27 127 106 115 147 59 36 134 43 22 145 121 138 56 80 108 122 39 47 73 148 55 35 16 141 4 31 114 46 79 + 65 68 7 135 72 49 111 29 89 137 80 133 130 53 132 141 96 136 129 83 73 116 78 109 15 84 63 57 82 97 105 56 67 123 10 5 85 BICOMP - 36 148 134 145 80 46 59 103 55 57 122 141 43 138 108 39 35 31 28 101 0 121 102 22 130 132 65 42 56 73 4 114 79 106 115 63 27 127 147 47 16 + 49 96 82 135 109 136 67 63 123 89 7 84 57 56 5 83 129 137 68 78 72 73 65 111 29 97 85 53 132 80 133 130 141 116 15 105 10 - $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_i2c_ex.c + $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_tim_ex.c ICCARM - 113 + 128 + + + __cstat + 149 BICOMP - 120 + 127 ICCARM - 130 0 57 103 102 28 132 65 42 101 63 27 127 106 115 147 59 36 134 43 22 145 121 138 56 80 108 122 39 47 73 148 55 35 16 141 4 31 114 46 79 + 65 68 7 135 72 49 111 29 89 137 80 133 130 53 132 141 96 136 129 83 73 116 78 109 15 84 63 57 82 97 105 56 67 123 10 5 85 BICOMP - 22 36 145 59 103 55 121 65 0 102 130 132 101 57 138 80 108 122 39 148 35 141 31 46 43 28 134 42 56 73 4 114 79 106 115 63 27 127 147 47 16 + 96 123 135 63 136 67 109 82 49 89 7 84 57 56 5 83 129 137 68 78 72 73 65 111 29 97 85 53 132 80 133 130 141 116 15 105 10 - $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_spi.c + $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_dma_ex.c ICCARM - 44 + 90 + + + __cstat + 168 BICOMP - 24 + 69 ICCARM - 130 0 57 103 102 28 132 65 42 101 63 27 127 106 115 147 59 36 134 43 22 145 121 138 56 80 108 122 39 47 73 148 55 35 16 141 4 31 114 46 79 + 65 68 7 135 72 49 111 29 89 137 80 133 130 53 132 141 96 136 129 83 73 116 78 109 15 84 63 57 82 97 105 56 67 123 10 5 85 BICOMP - 132 103 42 0 101 56 4 79 102 130 65 73 114 57 138 80 108 122 39 148 35 141 31 46 121 22 36 59 145 55 43 28 134 106 115 63 27 127 147 47 16 + 96 123 135 63 136 67 109 82 49 89 7 84 57 56 5 83 129 137 68 78 72 73 65 111 29 97 85 53 132 80 133 130 141 116 15 105 10 - $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_pwr.c + $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_cortex.c ICCARM - 34 + 76 + + + __cstat + 161 BICOMP - 124 + 16 ICCARM - 130 0 57 103 102 28 132 65 42 101 63 27 127 106 115 147 59 36 134 43 22 145 121 138 56 80 108 122 39 47 73 148 55 35 16 141 4 31 114 46 79 + 65 68 7 135 72 49 111 29 89 137 80 133 130 53 132 141 96 136 129 83 73 116 78 109 15 84 63 57 82 97 105 56 67 123 10 5 85 BICOMP - 57 36 141 145 122 43 59 103 55 80 148 46 134 138 108 39 35 31 28 101 0 121 102 22 130 132 65 42 56 73 4 114 79 106 115 63 27 127 147 47 16 + 96 111 135 136 67 72 65 89 68 78 73 29 137 7 109 84 63 57 82 56 123 5 83 49 129 97 85 53 132 80 133 130 141 116 15 105 10 - $PROJ_DIR$\..\Src\stm32l4xx_it.c + $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_gpio.c ICCARM - 131 + 101 + + + __cstat + 166 BICOMP - 1 + 106 ICCARM - 25 130 0 57 103 102 28 132 65 42 101 63 27 127 106 115 147 59 36 134 43 22 145 121 138 56 80 108 122 39 47 73 148 55 35 16 141 4 31 114 46 79 128 + 65 68 7 135 72 49 111 29 89 137 80 133 130 53 132 141 96 136 129 83 73 116 78 109 15 84 63 57 82 97 105 56 67 123 10 5 85 BICOMP - 0 130 103 102 47 132 121 22 65 115 127 147 42 128 57 138 80 108 122 39 148 35 141 31 46 43 28 134 106 63 27 101 16 25 36 59 145 56 73 55 4 114 79 + 49 96 82 135 109 136 67 63 123 89 7 84 57 56 5 83 129 137 68 78 72 73 65 111 29 97 85 53 132 80 133 130 141 116 15 105 10 - $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_exti.c + $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_tim.c ICCARM - 140 + 117 + + + __cstat + 148 BICOMP - 144 + 30 ICCARM - 130 0 57 103 102 28 132 65 42 101 63 27 127 106 115 147 59 36 134 43 22 145 121 138 56 80 108 122 39 47 73 148 55 35 16 141 4 31 114 46 79 + 65 68 7 135 72 49 111 29 89 137 80 133 130 53 132 141 96 136 129 83 73 116 78 109 15 84 63 57 82 97 105 56 67 123 10 5 85 BICOMP - 36 145 121 65 59 103 55 22 0 102 130 132 101 57 138 80 108 122 39 148 35 141 31 46 43 28 134 42 56 73 4 114 79 106 115 63 27 127 147 47 16 + 96 123 135 63 136 67 109 82 49 89 7 84 57 56 5 83 129 137 68 78 72 73 65 111 29 97 85 53 132 80 133 130 141 116 15 105 10 - $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_flash_ex.c + $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_exti.c ICCARM - 116 + 124 + + + __cstat + 164 BICOMP - 85 + 120 ICCARM - 130 0 57 103 102 28 132 65 42 101 63 27 127 106 115 147 59 36 134 43 22 145 121 138 56 80 108 122 39 47 73 148 55 35 16 141 4 31 114 46 79 + 65 68 7 135 72 49 111 29 89 137 80 133 130 53 132 141 96 136 129 83 73 116 78 109 15 84 63 57 82 97 105 56 67 123 10 5 85 BICOMP - 65 36 121 145 59 103 55 0 22 101 57 138 80 108 122 39 148 35 141 31 46 102 130 132 42 56 73 4 114 79 43 28 134 106 115 63 27 127 147 47 16 + 84 96 83 135 56 136 67 7 57 5 129 89 109 63 82 123 49 137 68 78 72 73 65 111 29 97 85 53 132 80 133 130 141 116 15 105 10 - $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_tim_ex.c + $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_i2c_ex.c ICCARM - 143 + 112 + + + __cstat + 152 BICOMP - 125 + 143 ICCARM - 130 0 57 103 102 28 132 65 42 101 63 27 127 106 115 147 59 36 134 43 22 145 121 138 56 80 108 122 39 47 73 148 55 35 16 141 4 31 114 46 79 + 65 68 7 135 72 49 111 29 89 137 80 133 130 53 132 141 96 136 129 83 73 116 78 109 15 84 63 57 82 97 105 56 67 123 10 5 85 BICOMP - 65 36 121 145 59 103 55 0 22 101 57 138 80 108 122 39 148 35 141 31 46 102 130 132 42 56 73 4 114 79 43 28 134 106 115 63 27 127 147 47 16 + 96 123 135 63 136 67 109 82 49 89 7 84 57 56 5 83 129 137 68 78 72 73 65 111 29 97 85 53 132 80 133 130 141 116 15 105 10 - $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_pwr_ex.c + $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_pwr.c ICCARM - 111 + 48 + + + __cstat + 167 BICOMP - 10 + 114 ICCARM - 130 0 57 103 102 28 132 65 42 101 63 27 127 106 115 147 59 36 134 43 22 145 121 138 56 80 108 122 39 47 73 148 55 35 16 141 4 31 114 46 79 + 65 68 7 135 72 49 111 29 89 137 80 133 130 53 132 141 96 136 129 83 73 116 78 109 15 84 63 57 82 97 105 56 67 123 10 5 85 BICOMP - 80 65 36 46 121 145 148 59 103 55 57 122 141 138 108 39 35 31 22 101 0 102 130 132 42 56 73 4 114 79 43 28 134 106 115 63 27 127 147 47 16 + 109 96 135 82 49 136 67 63 123 89 7 84 57 56 5 83 129 137 68 78 72 73 65 111 29 97 85 53 132 80 133 130 141 116 15 105 10 @@ -376,44 +437,52 @@ ICCARM - 123 + 115 + + + __cstat + 173 BICOMP - 146 + 121 ICCARM - 130 0 57 103 102 28 132 65 42 101 63 27 127 106 115 147 59 36 134 43 22 145 121 138 56 80 108 122 39 47 73 148 55 35 16 141 4 31 114 46 79 + 65 68 7 135 72 49 111 29 89 137 80 133 130 53 132 141 96 136 129 83 73 116 78 109 15 84 63 57 82 97 105 56 67 123 10 5 85 BICOMP - 36 145 22 59 103 55 121 65 0 102 130 132 101 57 138 80 108 122 39 148 35 141 31 46 43 28 134 42 56 73 4 114 79 106 115 63 27 127 147 47 16 + 135 72 96 65 136 67 111 89 68 78 73 29 137 7 109 84 63 57 82 56 123 5 83 49 129 97 85 53 132 80 133 130 141 116 15 105 10 - $PROJ_DIR$\..\Src\system_stm32l4xx.c + $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_i2c.c ICCARM - 2 + 142 + + + __cstat + 169 BICOMP - 117 + 79 ICCARM - 102 28 132 65 42 101 63 27 127 106 115 147 59 36 134 130 0 57 103 43 22 145 121 138 56 80 108 122 39 47 73 148 55 35 16 141 4 31 114 46 79 + 65 68 7 135 72 49 111 29 89 137 80 133 130 53 132 141 96 136 129 83 73 116 78 109 15 84 63 57 82 97 105 56 67 123 10 5 85 BICOMP - 102 130 103 145 55 132 0 65 28 134 36 101 59 121 22 42 56 73 4 114 79 106 115 63 27 127 147 57 138 80 108 122 39 148 35 141 31 46 43 47 16 + 96 123 135 63 136 67 109 82 49 89 7 84 57 56 5 83 129 137 68 78 72 73 65 111 29 97 85 53 132 80 133 130 141 116 15 105 10 @@ -422,21 +491,25 @@ ICCARM - 23 + 51 + + + __cstat + 162 BICOMP - 135 + 119 ICCARM - 130 0 57 103 102 28 132 65 42 101 63 27 127 106 115 147 59 36 134 43 22 145 121 138 56 80 108 122 39 47 73 148 55 35 16 141 4 31 114 46 79 + 65 68 7 135 72 49 111 29 89 137 80 133 130 53 132 141 96 136 129 83 73 116 78 109 15 84 63 57 82 97 105 56 67 123 10 5 85 BICOMP - 0 130 36 145 103 102 59 55 132 121 22 65 101 57 138 80 108 122 39 148 35 141 31 46 43 28 134 42 56 73 4 114 79 106 115 63 27 127 147 47 16 + 68 96 135 78 29 136 67 73 89 72 65 111 137 7 109 84 63 57 82 56 123 5 83 49 129 97 85 53 132 80 133 130 141 116 15 105 10 @@ -445,339 +518,385 @@ ICCARM - 17 + 66 + + + __cstat + 165 BICOMP - 33 + 58 ICCARM - 130 0 57 103 102 28 132 65 42 101 63 27 127 106 115 147 59 36 134 43 22 145 121 138 56 80 108 122 39 47 73 148 55 35 16 141 4 31 114 46 79 + 65 68 7 135 72 49 111 29 89 137 80 133 130 53 132 141 96 136 129 83 73 116 78 109 15 84 63 57 82 97 105 56 67 123 10 5 85 BICOMP - 102 103 36 145 0 130 59 55 132 121 22 65 101 57 138 80 108 122 39 148 35 141 31 46 43 28 134 42 56 73 4 114 79 106 115 63 27 127 147 47 16 + 96 78 29 135 68 136 67 73 89 72 65 111 137 7 109 84 63 57 82 56 123 5 83 49 129 97 85 53 132 80 133 130 141 116 15 105 10 - $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_i2c.c + $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_pwr_ex.c ICCARM - 104 + 131 + + + __cstat + 170 BICOMP - 48 + 91 ICCARM - 130 0 57 103 102 28 132 65 42 101 63 27 127 106 115 147 59 36 134 43 22 145 121 138 56 80 108 122 39 47 73 148 55 35 16 141 4 31 114 46 79 + 65 68 7 135 72 49 111 29 89 137 80 133 130 53 132 141 96 136 129 83 73 116 78 109 15 84 63 57 82 97 105 56 67 123 10 5 85 BICOMP - 132 103 42 101 56 4 79 102 130 65 73 114 0 121 22 36 59 145 55 57 138 80 108 122 39 148 35 141 31 46 43 28 134 106 115 63 27 127 147 47 16 + 63 96 135 123 136 67 109 82 49 89 7 84 57 56 5 83 129 137 68 78 72 73 65 111 29 97 85 53 132 80 133 130 141 116 15 105 10 - $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_uart.c + $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal.c ICCARM - 29 + 50 + + + __cstat + 158 BICOMP - 38 + 14 ICCARM - 130 0 57 103 102 28 132 65 42 101 63 27 127 106 115 147 59 36 134 43 22 145 121 138 56 80 108 122 39 47 73 148 55 35 16 141 4 31 114 46 79 + 65 68 7 135 72 49 111 29 89 137 80 133 130 53 132 141 96 136 129 83 73 116 78 109 15 84 63 57 82 97 105 56 67 123 10 5 85 BICOMP - 65 36 121 145 59 103 55 0 22 101 57 138 80 108 122 39 148 35 141 31 46 102 130 132 42 56 73 4 114 79 43 28 134 106 115 63 27 127 147 47 16 + 123 96 135 63 136 67 109 82 49 89 7 84 57 56 5 83 129 137 68 78 72 73 65 111 29 97 85 53 132 80 133 130 141 116 15 105 10 - $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_flash.c + $PROJ_DIR$\..\Src\common.c ICCARM - 126 + 3 + + + __cstat + 159 BICOMP - 136 + 6 ICCARM - 130 0 57 103 102 28 132 65 42 101 63 27 127 106 115 147 59 36 134 43 22 145 121 138 56 80 108 122 39 47 73 148 55 35 16 141 4 31 114 46 79 + 54 89 137 80 133 130 116 81 98 52 65 68 7 135 72 49 111 29 53 132 141 96 136 129 83 73 78 109 15 84 63 57 82 97 105 56 67 123 10 5 85 134 61 21 125 BICOMP - 57 36 141 145 122 43 59 103 55 80 148 46 134 138 108 39 35 31 28 101 0 121 102 22 130 132 65 42 56 73 4 114 79 106 115 63 27 127 147 47 16 + 135 137 129 98 134 89 15 64 61 116 65 68 83 53 29 81 52 125 80 133 130 7 109 84 63 57 82 56 123 5 49 132 141 105 10 54 78 72 73 111 136 96 97 67 85 21 - $PROJ_DIR$\..\Src\stm32l4xx_hal_msp.c + $PROJ_DIR$\..\Src\flash_if.c ICCARM - 13 + 103 + + + __cstat + 156 BICOMP - 51 + 122 ICCARM - 25 130 0 57 103 102 28 132 65 42 101 63 27 127 106 115 147 59 36 134 43 22 145 121 138 56 80 108 122 39 47 73 148 55 35 16 141 4 31 114 46 79 + 52 65 68 7 135 72 49 111 29 89 137 80 133 130 53 132 141 96 136 129 83 73 116 78 109 15 84 63 57 82 97 105 56 67 123 10 5 85 125 61 BICOMP - 122 36 43 145 57 141 59 103 55 80 148 46 134 130 138 108 39 35 31 28 101 0 121 102 22 132 65 42 56 73 4 114 79 25 106 115 63 27 127 147 47 16 + 135 78 29 89 73 137 15 61 65 68 72 111 132 130 141 125 7 109 84 63 57 82 56 123 5 83 49 129 53 80 133 116 105 10 52 136 96 97 67 85 - $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_rcc_ex.c + $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_rcc.c ICCARM - 12 + 92 + + + __cstat + 171 BICOMP - 105 + 60 ICCARM - 130 0 57 103 102 28 132 65 42 101 63 27 127 106 115 147 59 36 134 43 22 145 121 138 56 80 108 122 39 47 73 148 55 35 16 141 4 31 114 46 79 + 65 68 7 135 72 49 111 29 89 137 80 133 130 53 132 141 96 136 129 83 73 116 78 109 15 84 63 57 82 97 105 56 67 123 10 5 85 BICOMP - 65 36 121 145 59 103 55 0 22 101 102 130 132 42 56 73 4 114 79 57 138 80 108 122 39 148 35 141 31 46 43 28 134 106 115 63 27 127 147 47 16 + 111 96 135 136 67 72 65 89 68 78 73 29 137 7 109 84 63 57 82 56 123 5 83 49 129 97 85 53 132 80 133 130 141 116 15 105 10 - $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal.c + $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_rcc_ex.c ICCARM - 14 + 100 + + + __cstat + 147 BICOMP - 5 + 140 ICCARM - 130 0 57 103 102 28 132 65 42 101 63 27 127 106 115 147 59 36 134 43 22 145 121 138 56 80 108 122 39 47 73 148 55 35 16 141 4 31 114 46 79 + 65 68 7 135 72 49 111 29 89 137 80 133 130 53 132 141 96 136 129 83 73 116 78 109 15 84 63 57 82 97 105 56 67 123 10 5 85 BICOMP - 148 134 36 145 80 46 59 103 55 57 122 141 43 138 108 39 35 31 28 101 0 121 102 22 130 132 65 42 56 73 4 114 79 106 115 63 27 127 147 47 16 + 65 96 135 72 136 67 111 89 68 78 73 29 137 7 109 84 63 57 82 56 123 5 83 49 129 97 85 53 132 80 133 130 141 116 15 105 10 - $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_gpio.c + $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_flash.c ICCARM - 49 + 99 + + + __cstat + 150 BICOMP - 37 + 144 ICCARM - 130 0 57 103 102 28 132 65 42 101 63 27 127 106 115 147 59 36 134 43 22 145 121 138 56 80 108 122 39 47 73 148 55 35 16 141 4 31 114 46 79 + 65 68 7 135 72 49 111 29 89 137 80 133 130 53 132 141 96 136 129 83 73 116 78 109 15 84 63 57 82 97 105 56 67 123 10 5 85 BICOMP - 43 36 122 145 57 141 59 103 55 80 148 46 134 138 108 39 35 31 28 101 0 121 102 22 130 132 65 42 56 73 4 114 79 106 115 63 27 127 147 47 16 + 109 96 135 82 49 136 67 63 123 89 7 84 57 56 5 83 129 137 68 78 72 73 65 111 29 97 85 53 132 80 133 130 141 116 15 105 10 - $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_spi_ex.c + $PROJ_DIR$\..\Src\stm32l4xx_hal_msp.c ICCARM - 26 + 108 + + + __cstat + 154 BICOMP - 41 + 94 ICCARM - 130 0 57 103 102 28 132 65 42 101 63 27 127 106 115 147 59 36 134 43 22 145 121 138 56 80 108 122 39 47 73 148 55 35 16 141 4 31 114 46 79 + 52 65 68 7 135 72 49 111 29 89 137 80 133 130 53 132 141 96 136 129 83 73 116 78 109 15 84 63 57 82 97 105 56 67 123 10 5 85 BICOMP - 36 145 121 65 59 103 55 22 0 102 130 132 101 57 138 80 108 122 39 148 35 141 31 46 43 28 134 42 56 73 4 114 79 106 115 63 27 127 147 47 16 + 5 96 7 135 57 129 136 67 84 56 83 89 65 109 63 82 123 49 137 68 78 72 73 111 29 97 85 52 53 132 80 133 130 141 116 15 105 10 - $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_rcc.c + $PROJ_DIR$\..\Src\system_stm32l4xx.c ICCARM - 109 + 2 + + + __cstat + 157 BICOMP - 18 + 126 ICCARM - 130 0 57 103 102 28 132 65 42 101 63 27 127 106 115 147 59 36 134 43 22 145 121 138 56 80 108 122 39 47 73 148 55 35 16 141 4 31 114 46 79 + 72 49 111 29 89 137 80 133 130 53 132 141 96 136 129 65 68 7 135 83 73 116 78 109 15 84 63 57 82 97 105 56 67 123 10 5 85 BICOMP - 65 36 121 145 59 103 55 0 22 101 57 138 80 108 122 39 148 35 141 31 46 102 130 132 42 56 73 4 114 79 43 28 134 106 115 63 27 127 147 47 16 + 65 136 135 96 72 67 111 89 29 137 49 129 68 78 73 97 85 53 132 80 133 130 141 7 109 84 63 57 82 56 123 5 83 116 15 105 10 - $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_cortex.c + $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_spi_ex.c ICCARM - 7 + 107 + + + __cstat + 146 BICOMP - 60 + 88 ICCARM - 130 0 57 103 102 28 132 65 42 101 63 27 127 106 115 147 59 36 134 43 22 145 121 138 56 80 108 122 39 47 73 148 55 35 16 141 4 31 114 46 79 + 65 68 7 135 72 49 111 29 89 137 80 133 130 53 132 141 96 136 129 83 73 116 78 109 15 84 63 57 82 97 105 56 67 123 10 5 85 BICOMP - 57 36 141 145 122 43 59 103 55 80 148 46 134 138 108 39 35 31 28 101 0 121 102 22 130 132 65 42 56 73 4 114 79 106 115 63 27 127 147 47 16 + 96 111 135 136 67 72 65 89 68 78 73 29 137 7 109 84 63 57 82 56 123 5 83 49 129 97 85 53 132 80 133 130 141 116 15 105 10 - $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_tim.c + $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_flash_ex.c ICCARM - 137 + 113 + + + __cstat + 151 BICOMP - 45 + 102 ICCARM - 130 0 57 103 102 28 132 65 42 101 63 27 127 106 115 147 59 36 134 43 22 145 121 138 56 80 108 122 39 47 73 148 55 35 16 141 4 31 114 46 79 + 65 68 7 135 72 49 111 29 89 137 80 133 130 53 132 141 96 136 129 83 73 116 78 109 15 84 63 57 82 97 105 56 67 123 10 5 85 BICOMP - 132 103 42 101 56 4 79 102 130 65 73 114 0 121 22 36 59 145 55 57 138 80 108 122 39 148 35 141 31 46 43 28 134 106 115 63 27 127 147 47 16 + 96 65 135 72 136 67 111 89 68 78 73 29 137 7 109 84 63 57 82 56 123 5 83 49 129 97 85 53 132 80 133 130 141 116 15 105 10 - $PROJ_DIR$\CableMonitor_V3.2\Exe\CableMonitor_V3.2.out + $PROJ_DIR$\startup_stm32l496xx.s - ILINK - 50 - - - OBJCOPY - 53 + AARM + 75 - - - ILINK - 20 6 61 52 133 32 14 7 23 19 140 126 116 17 49 104 113 13 34 111 109 12 44 26 137 143 29 123 131 2 76 62 30 58 112 - - - $PROJ_DIR$\..\Src\flash_if.c + $PROJ_DIR$\..\Src\ymodem.c ICCARM - 61 + 25 + + + __cstat + 155 BICOMP - 129 + 93 ICCARM - 25 130 0 57 103 102 28 132 65 42 101 63 27 127 106 115 147 59 36 134 43 22 145 121 138 56 80 108 122 39 47 73 148 55 35 16 141 4 31 114 46 79 139 8 + 61 65 68 7 135 72 49 111 29 89 137 80 133 130 53 132 141 96 136 129 83 73 116 78 109 15 84 63 57 82 97 105 56 67 123 10 5 85 125 21 81 98 52 134 BICOMP - 28 47 103 8 130 0 115 127 147 42 139 57 138 80 108 122 39 148 35 141 31 46 43 134 106 63 27 65 101 16 25 121 102 22 132 36 59 145 56 73 55 4 114 79 + 68 111 137 61 52 135 72 65 98 21 78 73 29 136 96 89 67 125 81 134 7 109 84 63 57 82 56 123 5 83 49 129 97 85 116 53 132 80 133 130 141 15 105 10 - $PROJ_DIR$\..\Src\ymodem.c + $PROJ_DIR$\..\Src\stm32l4xx_it.c ICCARM - 76 + 74 + + + __cstat + 160 BICOMP - 21 + 22 ICCARM - 8 130 0 57 103 102 28 132 65 42 101 63 27 127 106 115 147 59 36 134 43 22 145 121 138 56 80 108 122 39 47 73 148 55 35 16 141 4 31 114 46 79 139 3 15 11 25 142 + 52 65 68 7 135 72 49 111 29 89 137 80 133 130 53 132 141 96 136 129 83 73 116 78 109 15 84 63 57 82 97 105 56 67 123 10 5 85 62 BICOMP - 65 36 130 121 145 0 59 103 55 42 8 25 3 22 101 11 139 15 142 57 138 80 108 122 39 148 35 141 31 46 102 132 56 73 4 114 79 43 28 134 106 115 63 27 127 147 47 16 + 72 135 65 89 111 137 15 68 78 73 29 132 130 141 62 7 109 84 63 57 82 56 123 5 83 49 129 53 80 133 116 105 10 52 136 96 97 67 85 @@ -786,78 +905,103 @@ ICCARM - 52 + 87 + + + __cstat + 163 BICOMP - 107 + 138 ICCARM - 25 130 0 57 103 102 28 132 65 42 101 63 27 127 106 115 147 59 36 134 43 22 145 121 138 56 80 108 122 39 47 73 148 55 35 16 141 4 31 114 46 79 139 8 + 52 65 68 7 135 72 49 111 29 89 137 80 133 130 53 132 141 96 136 129 83 73 116 78 109 15 84 63 57 82 97 105 56 67 123 10 5 85 125 61 BICOMP - 28 47 103 8 130 0 115 127 147 42 139 57 138 80 108 122 39 148 35 141 31 46 43 134 106 63 27 65 101 16 25 121 102 22 132 36 59 145 56 73 55 4 114 79 + 135 65 72 89 68 111 137 15 61 78 73 29 132 130 141 125 7 109 84 63 57 82 56 123 5 83 49 129 53 80 133 116 105 10 52 136 96 97 67 85 - $PROJ_DIR$\..\Src\menu.c + $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_spi.c ICCARM - 133 + 55 + + + __cstat + 145 BICOMP - 110 + 70 ICCARM - 25 130 0 57 103 102 28 132 65 42 101 63 27 127 106 115 147 59 36 134 43 22 145 121 138 56 80 108 122 39 47 73 148 55 35 16 141 4 31 114 46 79 139 8 142 3 + 65 68 7 135 72 49 111 29 89 137 80 133 130 53 132 141 96 136 129 83 73 116 78 109 15 84 63 57 82 97 105 56 67 123 10 5 85 BICOMP - 57 3 141 122 28 47 80 148 46 8 138 108 39 35 31 115 127 147 42 103 139 142 130 0 43 134 106 63 27 65 101 16 25 121 102 22 132 36 59 145 56 73 55 4 114 79 + 73 135 78 29 68 72 65 111 137 97 85 7 109 84 63 57 82 56 123 5 83 49 129 136 96 89 67 53 132 80 133 130 141 116 15 105 10 - $PROJ_DIR$\startup_stm32l496xx.s + $PROJ_DIR$\..\Src\menu.c - AARM - 32 + ICCARM + 110 - - - - $PROJ_DIR$\..\Src\common.c - - ICCARM - 6 + __cstat + 153 BICOMP - 40 + 118 ICCARM - 9 42 101 63 27 127 145 15 11 25 130 0 57 103 102 28 132 65 106 115 147 59 36 134 43 22 121 138 56 80 108 122 39 47 73 148 55 35 16 141 4 31 114 46 79 142 8 3 139 + 52 65 68 7 135 72 49 111 29 89 137 80 133 130 53 132 141 96 136 129 83 73 116 78 109 15 84 63 57 82 97 105 56 67 123 10 5 85 125 61 134 21 BICOMP - 148 134 101 47 142 127 80 46 118 8 145 57 122 141 43 106 42 65 103 15 25 139 63 27 138 108 39 35 31 28 115 147 16 130 9 11 0 121 102 22 132 36 59 56 73 55 4 114 79 3 + 135 82 21 49 109 89 63 123 137 15 61 7 84 57 56 5 83 129 132 130 141 125 134 65 68 78 72 73 111 29 53 80 133 116 105 10 52 136 96 97 67 85 + + + + + $PROJ_DIR$\CableMonitor_V3.2\Exe\CableMonitor_V3.2.out + + + ILINK + 86 + + + OBJCOPY + 9 + + + + + ILINK + 77 3 103 87 110 75 50 76 51 90 124 99 113 66 101 142 112 108 48 131 92 100 55 107 117 128 104 115 74 2 25 17 59 4 71 + + [REBUILD_ALL] + diff --git a/CablePositioning_IAP_V1.0/EWARM/CableMonitor_V3.2.ewp b/CablePositioning_IAP_V1.0/EWARM/CableMonitor_V3.2.ewp index 453e3e8..6c87380 100644 --- a/CablePositioning_IAP_V1.0/EWARM/CableMonitor_V3.2.ewp +++ b/CablePositioning_IAP_V1.0/EWARM/CableMonitor_V3.2.ewp @@ -1099,12 +1099,6 @@ $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal.c - - $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_i2c.c - - - $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_i2c_ex.c - $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_rcc.c @@ -1123,6 +1117,12 @@ $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_gpio.c + + $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_i2c.c + + + $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_i2c_ex.c + $PROJ_DIR$\..\Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_dma.c diff --git a/CablePositioning_IAP_V1.0/EWARM/settings/CableMonitor_V3.2.CableMonitor_V3.2.cspy.bat b/CablePositioning_IAP_V1.0/EWARM/settings/CableMonitor_V3.2.CableMonitor_V3.2.cspy.bat index 81433d6..0e46066 100644 --- a/CablePositioning_IAP_V1.0/EWARM/settings/CableMonitor_V3.2.CableMonitor_V3.2.cspy.bat +++ b/CablePositioning_IAP_V1.0/EWARM/settings/CableMonitor_V3.2.CableMonitor_V3.2.cspy.bat @@ -25,7 +25,7 @@ if not "%~1" == "" goto debugFile @echo on -"E:\Program Files (x86)\IAR Systems\Embedded Workbench 8.2\common\bin\cspybat" -f "D:\work1\CableMonitor_F427\code\cablemonitorv3.2\CableMonitor_V3.2\EWARM\settings\CableMonitor_V3.2.CableMonitor_V3.2.general.xcl" --backend -f "D:\work1\CableMonitor_F427\code\cablemonitorv3.2\CableMonitor_V3.2\EWARM\settings\CableMonitor_V3.2.CableMonitor_V3.2.driver.xcl" +"D:\App\IAR Systems\Embedded Workbench 8.2\common\bin\cspybat" -f "D:\Work\CablePositioning\Code\CablePositioningV1.0\CablePositioning_IAP_V1.0\EWARM\settings\CableMonitor_V3.2.CableMonitor_V3.2.general.xcl" --backend -f "D:\Work\CablePositioning\Code\CablePositioningV1.0\CablePositioning_IAP_V1.0\EWARM\settings\CableMonitor_V3.2.CableMonitor_V3.2.driver.xcl" @echo off goto end @@ -34,7 +34,7 @@ goto end @echo on -"E:\Program Files (x86)\IAR Systems\Embedded Workbench 8.2\common\bin\cspybat" -f "D:\work1\CableMonitor_F427\code\cablemonitorv3.2\CableMonitor_V3.2\EWARM\settings\CableMonitor_V3.2.CableMonitor_V3.2.general.xcl" "--debug_file=%~1" --backend -f "D:\work1\CableMonitor_F427\code\cablemonitorv3.2\CableMonitor_V3.2\EWARM\settings\CableMonitor_V3.2.CableMonitor_V3.2.driver.xcl" +"D:\App\IAR Systems\Embedded Workbench 8.2\common\bin\cspybat" -f "D:\Work\CablePositioning\Code\CablePositioningV1.0\CablePositioning_IAP_V1.0\EWARM\settings\CableMonitor_V3.2.CableMonitor_V3.2.general.xcl" "--debug_file=%~1" --backend -f "D:\Work\CablePositioning\Code\CablePositioningV1.0\CablePositioning_IAP_V1.0\EWARM\settings\CableMonitor_V3.2.CableMonitor_V3.2.driver.xcl" @echo off :end \ No newline at end of file diff --git a/CablePositioning_IAP_V1.0/EWARM/settings/CableMonitor_V3.2.CableMonitor_V3.2.cspy.ps1 b/CablePositioning_IAP_V1.0/EWARM/settings/CableMonitor_V3.2.CableMonitor_V3.2.cspy.ps1 index c990fd2..619cb49 100644 --- a/CablePositioning_IAP_V1.0/EWARM/settings/CableMonitor_V3.2.CableMonitor_V3.2.cspy.ps1 +++ b/CablePositioning_IAP_V1.0/EWARM/settings/CableMonitor_V3.2.CableMonitor_V3.2.cspy.ps1 @@ -23,9 +23,9 @@ if ($debugfile -eq "") { -& "E:\Program Files (x86)\IAR Systems\Embedded Workbench 8.2\common\bin\cspybat" -f "D:\work1\CableMonitor_F427\code\cablemonitorv3.2\CableMonitor_V3.2\EWARM\settings\CableMonitor_V3.2.CableMonitor_V3.2.general.xcl" --backend -f "D:\work1\CableMonitor_F427\code\cablemonitorv3.2\CableMonitor_V3.2\EWARM\settings\CableMonitor_V3.2.CableMonitor_V3.2.driver.xcl" +& "D:\App\IAR Systems\Embedded Workbench 8.2\common\bin\cspybat" -f "D:\Work\CablePositioning\Code\CablePositioningV1.0\CablePositioning_IAP_V1.0\EWARM\settings\CableMonitor_V3.2.CableMonitor_V3.2.general.xcl" --backend -f "D:\Work\CablePositioning\Code\CablePositioningV1.0\CablePositioning_IAP_V1.0\EWARM\settings\CableMonitor_V3.2.CableMonitor_V3.2.driver.xcl" } else { -& "E:\Program Files (x86)\IAR Systems\Embedded Workbench 8.2\common\bin\cspybat" -f "D:\work1\CableMonitor_F427\code\cablemonitorv3.2\CableMonitor_V3.2\EWARM\settings\CableMonitor_V3.2.CableMonitor_V3.2.general.xcl" --debug_file=$debugfile --backend -f "D:\work1\CableMonitor_F427\code\cablemonitorv3.2\CableMonitor_V3.2\EWARM\settings\CableMonitor_V3.2.CableMonitor_V3.2.driver.xcl" +& "D:\App\IAR Systems\Embedded Workbench 8.2\common\bin\cspybat" -f "D:\Work\CablePositioning\Code\CablePositioningV1.0\CablePositioning_IAP_V1.0\EWARM\settings\CableMonitor_V3.2.CableMonitor_V3.2.general.xcl" --debug_file=$debugfile --backend -f "D:\Work\CablePositioning\Code\CablePositioningV1.0\CablePositioning_IAP_V1.0\EWARM\settings\CableMonitor_V3.2.CableMonitor_V3.2.driver.xcl" } diff --git a/CablePositioning_IAP_V1.0/EWARM/settings/CableMonitor_V3.2.CableMonitor_V3.2.driver.xcl b/CablePositioning_IAP_V1.0/EWARM/settings/CableMonitor_V3.2.CableMonitor_V3.2.driver.xcl index beb202b..01b3287 100644 --- a/CablePositioning_IAP_V1.0/EWARM/settings/CableMonitor_V3.2.CableMonitor_V3.2.driver.xcl +++ b/CablePositioning_IAP_V1.0/EWARM/settings/CableMonitor_V3.2.CableMonitor_V3.2.driver.xcl @@ -6,7 +6,7 @@ "-p" -"E:\Program Files (x86)\IAR Systems\Embedded Workbench 8.2\arm\CONFIG\debugger\ST\STM32L496ZG.ddf" +"D:\App\IAR Systems\Embedded Workbench 8.2\arm\CONFIG\debugger\ST\STM32L496ZG.ddf" "--drv_verify_download" diff --git a/CablePositioning_IAP_V1.0/EWARM/settings/CableMonitor_V3.2.CableMonitor_V3.2.general.xcl b/CablePositioning_IAP_V1.0/EWARM/settings/CableMonitor_V3.2.CableMonitor_V3.2.general.xcl index e9f8318..ed67e84 100644 --- a/CablePositioning_IAP_V1.0/EWARM/settings/CableMonitor_V3.2.CableMonitor_V3.2.general.xcl +++ b/CablePositioning_IAP_V1.0/EWARM/settings/CableMonitor_V3.2.CableMonitor_V3.2.general.xcl @@ -1,14 +1,14 @@ -"E:\Program Files (x86)\IAR Systems\Embedded Workbench 8.2\arm\bin\armproc.dll" +"D:\App\IAR Systems\Embedded Workbench 8.2\arm\bin\armproc.dll" -"E:\Program Files (x86)\IAR Systems\Embedded Workbench 8.2\arm\bin\armjlink2.dll" +"D:\App\IAR Systems\Embedded Workbench 8.2\arm\bin\armjlink2.dll" -"D:\work1\CableMonitor_F427\code\cablemonitorv3.2\CableMonitor_V3.2\EWARM\CableMonitor_V3.2\Exe\CableMonitor_V3.2.out" +"D:\Work\CablePositioning\Code\CablePositioningV1.0\CablePositioning_IAP_V1.0\EWARM\CableMonitor_V3.2\Exe\CableMonitor_V3.2.out" ---plugin="E:\Program Files (x86)\IAR Systems\Embedded Workbench 8.2\arm\bin\armbat.dll" +--plugin="D:\App\IAR Systems\Embedded Workbench 8.2\arm\bin\armbat.dll" ---device_macro="E:\Program Files (x86)\IAR Systems\Embedded Workbench 8.2\arm\config\debugger\ST\STM32L4xx.dmac" +--device_macro="D:\App\IAR Systems\Embedded Workbench 8.2\arm\config\debugger\ST\STM32L4xx.dmac" ---flash_loader="E:\Program Files (x86)\IAR Systems\Embedded Workbench 8.2\arm\config\flashloader\ST\FlashSTM32L4AxxG.board" +--flash_loader="D:\App\IAR Systems\Embedded Workbench 8.2\arm\config\flashloader\ST\FlashSTM32L4AxxG.board" diff --git a/CablePositioning_IAP_V1.0/EWARM/settings/CableMonitor_V3.2.dnx b/CablePositioning_IAP_V1.0/EWARM/settings/CableMonitor_V3.2.dnx index fed9ff4..93fd3d4 100644 --- a/CablePositioning_IAP_V1.0/EWARM/settings/CableMonitor_V3.2.dnx +++ b/CablePositioning_IAP_V1.0/EWARM/settings/CableMonitor_V3.2.dnx @@ -27,7 +27,7 @@ 1720255418 - D:\work1\CableMonitor_F427\code\cablemonitorv3.2\CableMonitor_V3.2\EWARM\CableMonitor_V3.2\Exe\CableMonitor_V3.2.out + D:\Work\CablePositioning\Code\CablePositioningV1.0\CablePositioning_APP_V1.0\EWARM\CableMonitor_APP_V3.2\Exe\CableMonitor_APP_V3.2.out _ 0 diff --git a/CablePositioning_IAP_V1.0/EWARM/settings/Project.wsdt b/CablePositioning_IAP_V1.0/EWARM/settings/Project.wsdt index 20a39b2..a9dd17e 100644 --- a/CablePositioning_IAP_V1.0/EWARM/settings/Project.wsdt +++ b/CablePositioning_IAP_V1.0/EWARM/settings/Project.wsdt @@ -11,7 +11,7 @@ 20 1867 2 - + 0 -1 @@ -62,7 +62,7 @@ - 186 + 437 30 30 30 @@ -70,13 +70,17 @@ CableMonitor_V3.2 CableMonitor_V3.2/Application + CableMonitor_V3.2/Application/EWARM CableMonitor_V3.2/Application/User + CableMonitor_V3.2/Drivers + CableMonitor_V3.2/Drivers/CMSIS + CableMonitor_V3.2/Drivers/STM32L4xx_HAL_Driver CableMonitor_V3.2/Output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ack @@ -351,7 +355,7 @@ Main - 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 + 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 34050 @@ -409,7 +413,7 @@ - 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 + 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 diff --git a/CablePositioning_IAP_V1.0/Inc/flash_if.h b/CablePositioning_IAP_V1.0/Inc/flash_if.h index 5cb9162..7afb68e 100644 --- a/CablePositioning_IAP_V1.0/Inc/flash_if.h +++ b/CablePositioning_IAP_V1.0/Inc/flash_if.h @@ -73,17 +73,17 @@ enum { #define UPDATE_ERROR_MAGIC 0x9EFC845A /* SPI FLASH 分配示意图. 注意: 以下地址必须是扇区对齐. -0x0 0x1000 0x2000 0x3000 0x4000 0x5000 0x8000 0x10000 0x800000 -*********************************************************************** -| CONF | CONFB | RECO | RECOB | INFO | INFOB | TFTP IAP | TFTP IMG | -***********************************************************************/ -#define CONFIG_ADDRESS (uint32_t)0x0 -#define CONFIG_ADDRESS_BAK (uint32_t)0x1000 -#define RECORD_ADDRESS (uint32_t)0x2000 -#define RECORD_ADDRESS_BAK (uint32_t)0x3000 -#define INFO_ADDRESS (uint32_t)0x4000 -#define INFO_ADDRESS_BAK (uint32_t)0x5000 -#define TFTP_APP_ADDRESS (uint32_t)0x10000 +0x0 0x4000 0x8000 0xC000 0x10000 0x18000 0x20000 0x100000 0x800000 +******************************************************************** +| INFO | INFOB | CONF | CONFB | RECO | RECOB | TFTP IMG | IDLE | +********************************************************************/ +#define INFO_ADDRESS (uint32_t)0x0 +#define INFO_ADDRESS_BAK (uint32_t)0x4000 +#define RECORD_ADDRESS (uint32_t)0x8000 +#define RECORD_ADDRESS_BAK (uint32_t)0xC000 +#define CONFIG_ADDRESS (uint32_t)0x10000 +#define CONFIG_ADDRESS_BAK (uint32_t)0x18000 +#define TFTP_APP_ADDRESS (uint32_t)0x20000 #define TFTP_APP_ADDRESS_END (uint32_t)0x100000 #define SPI_FLASH_END_ADDRESS (uint32_t)0x800000 @@ -93,7 +93,7 @@ enum { | IAP | APP | *******************************************************/ #define IAP_ADDRESS (uint32_t)0x08000000 -#define APPLICATION_ADDRESS (uint32_t)0x08008000 +#define APP_ADDRESS (uint32_t)0x08020000 /* 内部flash结束地址. */ #define USER_FLASH_END_ADDRESS (uint32_t)0x08100000 diff --git a/CablePositioning_IAP_V1.0/Inc/main.h b/CablePositioning_IAP_V1.0/Inc/main.h index 2acb079..4098161 100644 --- a/CablePositioning_IAP_V1.0/Inc/main.h +++ b/CablePositioning_IAP_V1.0/Inc/main.h @@ -59,16 +59,13 @@ void Error_Handler(void); /* Private defines -----------------------------------------------------------*/ #define WDG_Pin GPIO_PIN_0 #define WDG_GPIO_Port GPIOF -#define B_485_EN_Pin GPIO_PIN_12 -#define B_485_EN_GPIO_Port GPIOF #define LED_RUN_Pin GPIO_PIN_4 #define LED_RUN_GPIO_Port GPIOG #define SPI_FLASH_WP_Pin GPIO_PIN_13 #define SPI_FLASH_WP_GPIO_Port GPIOG #define SPI_FLASH_CS_Pin GPIO_PIN_14 #define SPI_FLASH_CS_GPIO_Port GPIOG -#define POWER_EN_3V3_Pin GPIO_PIN_1 -#define POWER_EN_3V3_GPIO_Port GPIOE + /* USER CODE BEGIN Private defines */ extern SPI_HandleTypeDef *SpiHandle; extern UART_HandleTypeDef *UartHandle; diff --git a/CablePositioning_IAP_V1.0/Inc/stm32l4xx_hal_conf.h b/CablePositioning_IAP_V1.0/Inc/stm32l4xx_hal_conf.h index fdc772c..fd1202a 100644 --- a/CablePositioning_IAP_V1.0/Inc/stm32l4xx_hal_conf.h +++ b/CablePositioning_IAP_V1.0/Inc/stm32l4xx_hal_conf.h @@ -40,6 +40,7 @@ /*#define HAL_CRYP_MODULE_ENABLED */ /*#define HAL_CAN_MODULE_ENABLED */ /*#define HAL_COMP_MODULE_ENABLED */ +/*#define HAL_I2C_MODULE_ENABLED */ /*#define HAL_CRC_MODULE_ENABLED */ /*#define HAL_CRYP_MODULE_ENABLED */ /*#define HAL_DAC_MODULE_ENABLED */ @@ -76,7 +77,7 @@ #define HAL_SPI_MODULE_ENABLED /*#define HAL_SRAM_MODULE_ENABLED */ /*#define HAL_SWPMI_MODULE_ENABLED */ -#define HAL_TIM_MODULE_ENABLED +/*#define HAL_TIM_MODULE_ENABLED */ /*#define HAL_TSC_MODULE_ENABLED */ #define HAL_UART_MODULE_ENABLED /*#define HAL_USART_MODULE_ENABLED */ @@ -85,7 +86,6 @@ /*#define HAL_PSSI_MODULE_ENABLED */ #define HAL_GPIO_MODULE_ENABLED #define HAL_EXTI_MODULE_ENABLED -#define HAL_I2C_MODULE_ENABLED #define HAL_DMA_MODULE_ENABLED #define HAL_RCC_MODULE_ENABLED #define HAL_FLASH_MODULE_ENABLED diff --git a/CablePositioning_IAP_V1.0/Inc/stm32l4xx_it.h b/CablePositioning_IAP_V1.0/Inc/stm32l4xx_it.h index bb2682d..f592e34 100644 --- a/CablePositioning_IAP_V1.0/Inc/stm32l4xx_it.h +++ b/CablePositioning_IAP_V1.0/Inc/stm32l4xx_it.h @@ -55,7 +55,6 @@ void SVC_Handler(void); void DebugMon_Handler(void); void PendSV_Handler(void); void SysTick_Handler(void); -void TIM1_UP_TIM16_IRQHandler(void); /* USER CODE BEGIN EFP */ /* USER CODE END EFP */ diff --git a/CablePositioning_IAP_V1.0/Src/common.c b/CablePositioning_IAP_V1.0/Src/common.c index d0bb475..ed12d14 100644 --- a/CablePositioning_IAP_V1.0/Src/common.c +++ b/CablePositioning_IAP_V1.0/Src/common.c @@ -59,7 +59,6 @@ static uint32_t crc32Table[256]; static uint32_t dev_magic; static uint32_t dev_magic_bak; -extern uint8_t is_watchdog; extern uint8_t aPacketData[PACKET_1K_SIZE + PACKET_DATA_INDEX + PACKET_TRAILER_SIZE]; /* Private function prototypes -----------------------------------------------*/ @@ -183,9 +182,7 @@ void Serial_PutString(uint8_t *p_string) { length++; } - HAL_GPIO_WritePin(B_485_EN_GPIO_Port, B_485_EN_Pin, GPIO_PIN_SET); HAL_UART_Transmit(UartHandle, p_string, length, TX_TIMEOUT); - HAL_GPIO_WritePin(B_485_EN_GPIO_Port, B_485_EN_Pin, GPIO_PIN_RESET); } /** @@ -202,9 +199,7 @@ HAL_StatusTypeDef Serial_PutByte( uint8_t param ) { UartHandle->gState = HAL_UART_STATE_READY; } - HAL_GPIO_WritePin(B_485_EN_GPIO_Port, B_485_EN_Pin, GPIO_PIN_SET); rv = HAL_UART_Transmit(UartHandle, ¶m, 1, TX_TIMEOUT); - HAL_GPIO_WritePin(B_485_EN_GPIO_Port, B_485_EN_Pin, GPIO_PIN_RESET); return rv; } @@ -223,9 +218,7 @@ HAL_StatusTypeDef Serial_PutBytes(uint8_t* buf, uint16_t len, uint32_t timeout) { UartHandle->gState = HAL_UART_STATE_READY; } - HAL_GPIO_WritePin(B_485_EN_GPIO_Port, B_485_EN_Pin, GPIO_PIN_SET); rv = HAL_UART_Transmit(UartHandle, buf, len, timeout); - HAL_GPIO_WritePin(B_485_EN_GPIO_Port, B_485_EN_Pin, GPIO_PIN_RESET); return rv; } @@ -244,9 +237,7 @@ void vty_print(char *format, ...) if (vsnprintf(buf, USART_PRINT_BUF_LEN, format, ap) > 0) { - HAL_GPIO_WritePin(B_485_EN_GPIO_Port, B_485_EN_Pin, GPIO_PIN_SET); HAL_UART_Transmit(UartHandle, (uint8_t*)buf, strlen(buf), 1000); - HAL_GPIO_WritePin(B_485_EN_GPIO_Port, B_485_EN_Pin, GPIO_PIN_RESET); } va_end(ap); @@ -572,6 +563,7 @@ void _updata_crc_check(uint32_t addr, uint32_t size) /* 比较报文头信息 */ if (crc32_value != pkt_tail->crc32 || dev_info.type_m != pkt_tail->dev_type_m + || dev_info.type_s != pkt_tail->dev_type_s || pkt_tail->file_type != 2) { vty_print("Type %d %d %d %x %x\r\n", dev_info.type_m, dev_info.type_s, pkt_tail->file_type, pkt_tail->crc32, crc32_value); @@ -592,7 +584,7 @@ CRC_CHECK_ERROR: static void _updata_process(void) { uint32_t spi_flash_address = TFTP_APP_ADDRESS; - uint32_t flash_write_address = APPLICATION_ADDRESS; + uint32_t flash_write_address = APP_ADDRESS; uint32_t fireware_size = dev_info.spi_fireware_size; uint16_t write_size = 0; uint16_t write_flash_size = 0; @@ -600,7 +592,7 @@ static void _updata_process(void) Serial_PutString("\r\nEntry updata.\r\n"); /* 擦除内部flash. */ - if (FLASH_If_Erase(APPLICATION_ADDRESS) != FLASHIF_OK) + if (FLASH_If_Erase(APP_ADDRESS) != FLASHIF_OK) goto UPDATA_ERROR; /* 循环写入内部flash. */ @@ -665,15 +657,15 @@ static int32_t _is_app_intact(void) /* 计算crc. */ size = dev_info.fireware_size - 4; - crc32_value = crc32_update(crc32_value, (char*)APPLICATION_ADDRESS, size); + crc32_value = crc32_update(crc32_value, (char*)APP_ADDRESS, size); /* 读取包头. */ - memcpy(&pkt_tail, (void*)(APPLICATION_ADDRESS + dev_info.fireware_size - sizeof(bin_pkt_tail_t)), sizeof(bin_pkt_tail_t)); + memcpy(&pkt_tail, (void*)(APP_ADDRESS + dev_info.fireware_size - sizeof(bin_pkt_tail_t)), sizeof(bin_pkt_tail_t)); /* 比较报文头信息 */ - //vty_print("1 %x %x\r\n", crc32_value, pkt_tail.crc32); if (crc32_value != pkt_tail.crc32 || dev_info.type_m != pkt_tail.dev_type_m + || dev_info.type_s != pkt_tail.dev_type_s || pkt_tail.file_type != 2) { return FALSE; @@ -708,7 +700,6 @@ void menu_entry(void) && dev_record.reset_type != RESET_IAP && dev_record.reset_type != RESET_WATCHDOG) { - //HAL_Delay(1000); start_app(); } @@ -741,7 +732,6 @@ void watchdog_refresh(void) HAL_GPIO_WritePin(WDG_GPIO_Port, WDG_Pin, GPIO_PIN_SET); HAL_Delay(1); HAL_GPIO_WritePin(WDG_GPIO_Port, WDG_Pin, GPIO_PIN_RESET); - is_watchdog = TRUE; } #if BYTE_ORDER == LITTLE_ENDIAN diff --git a/CablePositioning_IAP_V1.0/Src/flash_if.c b/CablePositioning_IAP_V1.0/Src/flash_if.c index b48bebe..f71b1e8 100644 --- a/CablePositioning_IAP_V1.0/Src/flash_if.c +++ b/CablePositioning_IAP_V1.0/Src/flash_if.c @@ -299,7 +299,7 @@ uint32_t FLASH_If_GetWriteProtectionStatus(void) if(OptionsBytesStruct1.PCROPEndAddr > OptionsBytesStruct1.PCROPStartAddr) { /* check if user area are included inside this range */ - if(OptionsBytesStruct1.PCROPStartAddr > APPLICATION_ADDRESS) + if(OptionsBytesStruct1.PCROPStartAddr > APP_ADDRESS) { ProtectedPAGE|= FLASHIF_PROTECTION_PCROPENABLED; } @@ -308,7 +308,7 @@ uint32_t FLASH_If_GetWriteProtectionStatus(void) if(OptionsBytesStruct2.PCROPEndAddr > OptionsBytesStruct2.PCROPStartAddr) { /* check if user area are included inside this range */ - if(OptionsBytesStruct1.PCROPStartAddr > APPLICATION_ADDRESS) + if(OptionsBytesStruct1.PCROPStartAddr > APP_ADDRESS) { ProtectedPAGE|= FLASHIF_PROTECTION_PCROPENABLED; } @@ -318,7 +318,7 @@ uint32_t FLASH_If_GetWriteProtectionStatus(void) if(OptionsBytesStruct1.WRPEndOffset > OptionsBytesStruct1.WRPStartOffset) { /* check if area is inside the WRP Range */ - if((OptionsBytesStruct1.WRPStartOffset * FLASH_PAGE_SIZE + FLASH_BASE) >= APPLICATION_ADDRESS) + if((OptionsBytesStruct1.WRPStartOffset * FLASH_PAGE_SIZE + FLASH_BASE) >= APP_ADDRESS) { ProtectedPAGE|= FLASHIF_PROTECTION_WRPENABLED; } @@ -327,7 +327,7 @@ uint32_t FLASH_If_GetWriteProtectionStatus(void) if(OptionsBytesStruct2.WRPEndOffset > OptionsBytesStruct2.WRPStartOffset) { /* check if area is inside the WRP Range */ - if((OptionsBytesStruct2.WRPStartOffset * FLASH_PAGE_SIZE + FLASH_BASE) >= APPLICATION_ADDRESS) + if((OptionsBytesStruct2.WRPStartOffset * FLASH_PAGE_SIZE + FLASH_BASE) >= APP_ADDRESS) { ProtectedPAGE|= FLASHIF_PROTECTION_WRPENABLED; } @@ -336,7 +336,7 @@ uint32_t FLASH_If_GetWriteProtectionStatus(void) if(OptionsBytesStruct3.WRPEndOffset > OptionsBytesStruct3.WRPStartOffset) { /* check if area is inside the WRP Range */ - if((OptionsBytesStruct3.WRPStartOffset * FLASH_PAGE_SIZE + FLASH_BASE + FLASH_PAGE_SIZE * FLASH_PAGE_NBPERBANK) >= APPLICATION_ADDRESS) + if((OptionsBytesStruct3.WRPStartOffset * FLASH_PAGE_SIZE + FLASH_BASE + FLASH_PAGE_SIZE * FLASH_PAGE_NBPERBANK) >= APP_ADDRESS) { ProtectedPAGE|= FLASHIF_PROTECTION_WRPENABLED; } @@ -345,7 +345,7 @@ uint32_t FLASH_If_GetWriteProtectionStatus(void) if(OptionsBytesStruct4.WRPEndOffset > OptionsBytesStruct4.WRPStartOffset) { /* check if area is inside the WRP Range */ - if((OptionsBytesStruct4.WRPStartOffset * FLASH_PAGE_SIZE + FLASH_BASE + FLASH_PAGE_SIZE * FLASH_PAGE_NBPERBANK) >= APPLICATION_ADDRESS) + if((OptionsBytesStruct4.WRPStartOffset * FLASH_PAGE_SIZE + FLASH_BASE + FLASH_PAGE_SIZE * FLASH_PAGE_NBPERBANK) >= APP_ADDRESS) { ProtectedPAGE|= FLASHIF_PROTECTION_WRPENABLED; } diff --git a/CablePositioning_IAP_V1.0/Src/main.c b/CablePositioning_IAP_V1.0/Src/main.c index 738f3d7..37d455f 100644 --- a/CablePositioning_IAP_V1.0/Src/main.c +++ b/CablePositioning_IAP_V1.0/Src/main.c @@ -42,14 +42,11 @@ /* Private variables ---------------------------------------------------------*/ SPI_HandleTypeDef hspi3; -TIM_HandleTypeDef htim1; - UART_HandleTypeDef huart4; /* USER CODE BEGIN PV */ SPI_HandleTypeDef *SpiHandle = &hspi3; UART_HandleTypeDef *UartHandle = &huart4; -uint8_t is_watchdog = FALSE; /* USER CODE END PV */ /* Private function prototypes -----------------------------------------------*/ @@ -57,7 +54,6 @@ void SystemClock_Config(void); static void MX_GPIO_Init(void); static void MX_SPI3_Init(void); static void MX_UART4_Init(void); -static void MX_TIM1_Init(void); /* USER CODE BEGIN PFP */ /* USER CODE END PFP */ @@ -95,26 +91,24 @@ int main(void) /* Initialize all configured peripherals */ MX_GPIO_Init(); - MX_TIM1_Init(); - HAL_TIM_Base_Start_IT(&htim1); MX_SPI3_Init(); MX_UART4_Init(); /* USER CODE BEGIN 2 */ HAL_Delay(10); - /* ʼڲ flash. */ + /* Init internal flash */ FLASH_If_Init(); - /* ʼ crc32. */ + /* Init crc32 */ crc32_table_init(); - /* ʼ. */ + /* Init device */ dev_record_read(); dev_info_init(); - /* ʾ IAP 汾. */ + /* Show version */ Serial_PutString("\r\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n"); Serial_PutByte(0xc); vty_print("Boot version %s, compile time is %s.\r\n", dev_info.boot_version, dev_info.boot_compile_time); - /* ѡ IAP ʽ. */ HAL_GPIO_WritePin(LED_RUN_GPIO_Port, LED_RUN_Pin, GPIO_PIN_SET); watchdog_refresh(); + /* Choose start way. */ menu_entry(); /* USER CODE END 2 */ @@ -145,6 +139,7 @@ void SystemClock_Config(void) { Error_Handler(); } + /** Initializes the RCC Oscillators according to the specified parameters * in the RCC_OscInitTypeDef structure. */ @@ -162,6 +157,7 @@ void SystemClock_Config(void) { Error_Handler(); } + /** Initializes the CPU, AHB and APB buses clocks */ RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_SYSCLK @@ -217,53 +213,6 @@ static void MX_SPI3_Init(void) } -/** - * @brief TIM1 Initialization Function - * @param None - * @retval None - */ -static void MX_TIM1_Init(void) -{ - - /* USER CODE BEGIN TIM1_Init 0 */ - - /* USER CODE END TIM1_Init 0 */ - - TIM_ClockConfigTypeDef sClockSourceConfig = {0}; - TIM_MasterConfigTypeDef sMasterConfig = {0}; - - /* USER CODE BEGIN TIM1_Init 1 */ - - /* USER CODE END TIM1_Init 1 */ - htim1.Instance = TIM1; - htim1.Init.Prescaler = 39999; - htim1.Init.CounterMode = TIM_COUNTERMODE_UP; - htim1.Init.Period = 39999; - htim1.Init.ClockDivision = TIM_CLOCKDIVISION_DIV4; - htim1.Init.RepetitionCounter = 0; - htim1.Init.AutoReloadPreload = TIM_AUTORELOAD_PRELOAD_ENABLE; - if (HAL_TIM_Base_Init(&htim1) != HAL_OK) - { - Error_Handler(); - } - sClockSourceConfig.ClockSource = TIM_CLOCKSOURCE_INTERNAL; - if (HAL_TIM_ConfigClockSource(&htim1, &sClockSourceConfig) != HAL_OK) - { - Error_Handler(); - } - sMasterConfig.MasterOutputTrigger = TIM_TRGO_RESET; - sMasterConfig.MasterOutputTrigger2 = TIM_TRGO2_RESET; - sMasterConfig.MasterSlaveMode = TIM_MASTERSLAVEMODE_DISABLE; - if (HAL_TIMEx_MasterConfigSynchronization(&htim1, &sMasterConfig) != HAL_OK) - { - Error_Handler(); - } - /* USER CODE BEGIN TIM1_Init 2 */ - - /* USER CODE END TIM1_Init 2 */ - -} - /** * @brief UART4 Initialization Function * @param None @@ -307,6 +256,8 @@ static void MX_UART4_Init(void) static void MX_GPIO_Init(void) { GPIO_InitTypeDef GPIO_InitStruct = {0}; +/* USER CODE BEGIN MX_GPIO_Init_1 */ +/* USER CODE END MX_GPIO_Init_1 */ /* GPIO Ports Clock Enable */ __HAL_RCC_GPIOE_CLK_ENABLE(); @@ -320,7 +271,7 @@ static void MX_GPIO_Init(void) HAL_PWREx_EnableVddIO2(); /*Configure GPIO pin Output Level */ - HAL_GPIO_WritePin(GPIOF, WDG_Pin|B_485_EN_Pin, GPIO_PIN_RESET); + HAL_GPIO_WritePin(WDG_GPIO_Port, WDG_Pin, GPIO_PIN_RESET); /*Configure GPIO pin Output Level */ HAL_GPIO_WritePin(LED_RUN_GPIO_Port, LED_RUN_Pin, GPIO_PIN_RESET); @@ -328,17 +279,14 @@ static void MX_GPIO_Init(void) /*Configure GPIO pin Output Level */ HAL_GPIO_WritePin(GPIOG, SPI_FLASH_WP_Pin|SPI_FLASH_CS_Pin, GPIO_PIN_SET); - /*Configure GPIO pin Output Level */ - HAL_GPIO_WritePin(POWER_EN_3V3_GPIO_Port, POWER_EN_3V3_Pin, GPIO_PIN_SET); - /*Configure GPIO pins : PE2 PE3 PE4 PE5 PE6 PE7 PE8 PE9 PE10 PE11 PE12 PE13 - PE14 PE15 PE0 */ + PE14 PE15 PE0 PE1 */ GPIO_InitStruct.Pin = GPIO_PIN_2|GPIO_PIN_3|GPIO_PIN_4|GPIO_PIN_5 |GPIO_PIN_6|GPIO_PIN_7|GPIO_PIN_8|GPIO_PIN_9 |GPIO_PIN_10|GPIO_PIN_11|GPIO_PIN_12|GPIO_PIN_13 - |GPIO_PIN_14|GPIO_PIN_15|GPIO_PIN_0; + |GPIO_PIN_14|GPIO_PIN_15|GPIO_PIN_0|GPIO_PIN_1; GPIO_InitStruct.Mode = GPIO_MODE_ANALOG; GPIO_InitStruct.Pull = GPIO_NOPULL; HAL_GPIO_Init(GPIOE, &GPIO_InitStruct); @@ -353,21 +301,21 @@ static void MX_GPIO_Init(void) GPIO_InitStruct.Pull = GPIO_NOPULL; HAL_GPIO_Init(GPIOC, &GPIO_InitStruct); - /*Configure GPIO pins : WDG_Pin B_485_EN_Pin */ - GPIO_InitStruct.Pin = WDG_Pin|B_485_EN_Pin; + /*Configure GPIO pin : WDG_Pin */ + GPIO_InitStruct.Pin = WDG_Pin; GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP; GPIO_InitStruct.Pull = GPIO_NOPULL; GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW; - HAL_GPIO_Init(GPIOF, &GPIO_InitStruct); + HAL_GPIO_Init(WDG_GPIO_Port, &GPIO_InitStruct); /*Configure GPIO pins : PF1 PF2 PF3 PF4 PF5 PF6 PF7 PF8 - PF9 PF10 PF11 PF13 - PF14 PF15 */ + PF9 PF10 PF11 PF12 + PF13 PF14 PF15 */ GPIO_InitStruct.Pin = GPIO_PIN_1|GPIO_PIN_2|GPIO_PIN_3|GPIO_PIN_4 |GPIO_PIN_5|GPIO_PIN_6|GPIO_PIN_7|GPIO_PIN_8 - |GPIO_PIN_9|GPIO_PIN_10|GPIO_PIN_11|GPIO_PIN_13 - |GPIO_PIN_14|GPIO_PIN_15; + |GPIO_PIN_9|GPIO_PIN_10|GPIO_PIN_11|GPIO_PIN_12 + |GPIO_PIN_13|GPIO_PIN_14|GPIO_PIN_15; GPIO_InitStruct.Mode = GPIO_MODE_ANALOG; GPIO_InitStruct.Pull = GPIO_NOPULL; HAL_GPIO_Init(GPIOF, &GPIO_InitStruct); @@ -438,37 +386,12 @@ static void MX_GPIO_Init(void) GPIO_InitStruct.Pull = GPIO_NOPULL; HAL_GPIO_Init(GPIOH, &GPIO_InitStruct); - /*Configure GPIO pin : POWER_EN_3V3_Pin */ - GPIO_InitStruct.Pin = POWER_EN_3V3_Pin; - GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP; - GPIO_InitStruct.Pull = GPIO_NOPULL; - GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW; - HAL_GPIO_Init(POWER_EN_3V3_GPIO_Port, &GPIO_InitStruct); - +/* USER CODE BEGIN MX_GPIO_Init_2 */ +/* USER CODE END MX_GPIO_Init_2 */ } /* USER CODE BEGIN 4 */ -void HAL_TIM_PeriodElapsedCallback(TIM_HandleTypeDef *htim) -{ - static uint8_t wdg_cnt = 0; - - /* tim1 20s watchdog. */ - if (TIM1 == htim->Instance) - { - /* 2 分钟看看门狗处理. */ - wdg_cnt++; - if (wdg_cnt > 6) - { - wdg_cnt = 0; - if (!is_watchdog) - { - HAL_NVIC_SystemReset(); - } - - is_watchdog = FALSE; - } - } -} + /* USER CODE END 4 */ /** @@ -502,4 +425,3 @@ void assert_failed(uint8_t *file, uint32_t line) /* USER CODE END 6 */ } #endif /* USE_FULL_ASSERT */ - diff --git a/CablePositioning_IAP_V1.0/Src/menu.c b/CablePositioning_IAP_V1.0/Src/menu.c index 0e55a19..d1eb311 100644 --- a/CablePositioning_IAP_V1.0/Src/menu.c +++ b/CablePositioning_IAP_V1.0/Src/menu.c @@ -61,8 +61,6 @@ uint32_t JumpAddress; uint32_t FlashProtection = 0; uint8_t aFileName[FILE_NAME_LENGTH]; -extern uint8_t is_watchdog; - /* Private function prototypes -----------------------------------------------*/ void SerialDownload(void); void SerialUpload(uint32_t addr, const uint8_t *filename, uint32_t size); @@ -80,8 +78,7 @@ void SerialDownload(void) COM_StatusTypeDef result; Serial_PutString("Waiting for file ... (press 'a' to abort)\n\r"); - result = Ymodem_Receive( &size ); - HAL_Delay(500); + result = Ymodem_Receive(&size); if (result == COM_OK) { dev_info.fireware_size = size; @@ -151,11 +148,11 @@ void start_app(void) Serial_PutString("\r\nStart program ...\r\n\n"); __set_PRIMASK(1); /* execute the new program */ - JumpAddress = *(__IO uint32_t*) (APPLICATION_ADDRESS + 4); + JumpAddress = *(__IO uint32_t*) (APP_ADDRESS + 4); /* Jump to user application */ JumpToApplication = (pFunction) JumpAddress; /* Initialize user application's Stack Pointer */ - __set_MSP(*(__IO uint32_t*) APPLICATION_ADDRESS); + __set_MSP(*(__IO uint32_t*) APP_ADDRESS); JumpToApplication(); } @@ -463,12 +460,12 @@ void Main_Menu(void) case '2' : /* Upload IAP from the internal Flash */ flash_type = INTERNAL_FLASH_TYPE; - SerialUpload(IAP_ADDRESS, IAP_NAME, APPLICATION_ADDRESS - IAP_ADDRESS); + SerialUpload(IAP_ADDRESS, IAP_NAME, APP_ADDRESS - IAP_ADDRESS); break; case '3' : /* Upload user application from the internal Flash */ flash_type = INTERNAL_FLASH_TYPE; - SerialUpload(APPLICATION_ADDRESS, IMG_NAME, dev_info.fireware_size); + SerialUpload(APP_ADDRESS, IMG_NAME, dev_info.fireware_size); break; case '4' : /* Upload user application from the spi Flash */ @@ -510,9 +507,9 @@ void Main_Menu(void) dev_info_init(); } break; - default: - Serial_PutString("Invalid input.\r\n"); - break; + default: + Serial_PutString("Invalid input.\r\n"); + break; } } } diff --git a/CablePositioning_IAP_V1.0/Src/stm32l4xx_hal_msp.c b/CablePositioning_IAP_V1.0/Src/stm32l4xx_hal_msp.c index b5fa1af..2df88e4 100644 --- a/CablePositioning_IAP_V1.0/Src/stm32l4xx_hal_msp.c +++ b/CablePositioning_IAP_V1.0/Src/stm32l4xx_hal_msp.c @@ -20,6 +20,7 @@ /* Includes ------------------------------------------------------------------*/ #include "main.h" + /* USER CODE BEGIN Includes */ /* USER CODE END Includes */ @@ -143,56 +144,6 @@ void HAL_SPI_MspDeInit(SPI_HandleTypeDef* hspi) } -/** -* @brief TIM_Base MSP Initialization -* This function configures the hardware resources used in this example -* @param htim_base: TIM_Base handle pointer -* @retval None -*/ -void HAL_TIM_Base_MspInit(TIM_HandleTypeDef* htim_base) -{ - if(htim_base->Instance==TIM1) - { - /* USER CODE BEGIN TIM1_MspInit 0 */ - - /* USER CODE END TIM1_MspInit 0 */ - /* Peripheral clock enable */ - __HAL_RCC_TIM1_CLK_ENABLE(); - /* TIM1 interrupt Init */ - HAL_NVIC_SetPriority(TIM1_UP_TIM16_IRQn, 0, 0); - HAL_NVIC_EnableIRQ(TIM1_UP_TIM16_IRQn); - /* USER CODE BEGIN TIM1_MspInit 1 */ - - /* USER CODE END TIM1_MspInit 1 */ - } - -} - -/** -* @brief TIM_Base MSP De-Initialization -* This function freeze the hardware resources used in this example -* @param htim_base: TIM_Base handle pointer -* @retval None -*/ -void HAL_TIM_Base_MspDeInit(TIM_HandleTypeDef* htim_base) -{ - if(htim_base->Instance==TIM1) - { - /* USER CODE BEGIN TIM1_MspDeInit 0 */ - - /* USER CODE END TIM1_MspDeInit 0 */ - /* Peripheral clock disable */ - __HAL_RCC_TIM1_CLK_DISABLE(); - - /* TIM1 interrupt DeInit */ - HAL_NVIC_DisableIRQ(TIM1_UP_TIM16_IRQn); - /* USER CODE BEGIN TIM1_MspDeInit 1 */ - - /* USER CODE END TIM1_MspDeInit 1 */ - } - -} - /** * @brief UART MSP Initialization * This function configures the hardware resources used in this example @@ -208,6 +159,7 @@ void HAL_UART_MspInit(UART_HandleTypeDef* huart) /* USER CODE BEGIN UART4_MspInit 0 */ /* USER CODE END UART4_MspInit 0 */ + /** Initializes the peripherals clock */ PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_UART4; @@ -271,4 +223,3 @@ void HAL_UART_MspDeInit(UART_HandleTypeDef* huart) /* USER CODE BEGIN 1 */ /* USER CODE END 1 */ - diff --git a/CablePositioning_IAP_V1.0/Src/stm32l4xx_it.c b/CablePositioning_IAP_V1.0/Src/stm32l4xx_it.c index ffd16d2..58fb505 100644 --- a/CablePositioning_IAP_V1.0/Src/stm32l4xx_it.c +++ b/CablePositioning_IAP_V1.0/Src/stm32l4xx_it.c @@ -55,7 +55,7 @@ /* USER CODE END 0 */ /* External variables --------------------------------------------------------*/ -extern TIM_HandleTypeDef htim1; + /* USER CODE BEGIN EV */ /* USER CODE END EV */ @@ -198,21 +198,6 @@ void SysTick_Handler(void) /* please refer to the startup file (startup_stm32l4xx.s). */ /******************************************************************************/ -/** - * @brief This function handles TIM1 update interrupt and TIM16 global interrupt. - */ -void TIM1_UP_TIM16_IRQHandler(void) -{ - /* USER CODE BEGIN TIM1_UP_TIM16_IRQn 0 */ - - /* USER CODE END TIM1_UP_TIM16_IRQn 0 */ - HAL_TIM_IRQHandler(&htim1); - /* USER CODE BEGIN TIM1_UP_TIM16_IRQn 1 */ - - /* USER CODE END TIM1_UP_TIM16_IRQn 1 */ -} - /* USER CODE BEGIN 1 */ /* USER CODE END 1 */ - diff --git a/CablePositioning_IAP_V1.0/Src/ymodem.c b/CablePositioning_IAP_V1.0/Src/ymodem.c index 531fb37..86e37bb 100644 --- a/CablePositioning_IAP_V1.0/Src/ymodem.c +++ b/CablePositioning_IAP_V1.0/Src/ymodem.c @@ -310,7 +310,7 @@ COM_StatusTypeDef Ymodem_Receive ( uint32_t *p_size ) COM_StatusTypeDef result = COM_OK; /* Initialize flashdestination variable */ - flashdestination = APPLICATION_ADDRESS; + flashdestination = APP_ADDRESS; while ((session_done == 0) && (result == COM_OK)) { @@ -342,7 +342,7 @@ COM_StatusTypeDef Ymodem_Receive ( uint32_t *p_size ) } else { - if (packets_received == 0) + if (packets_received == 0 && session_begin == 0) { /* File name packet */ if (aPacketData[PACKET_DATA_INDEX] != 0) @@ -377,7 +377,7 @@ COM_StatusTypeDef Ymodem_Receive ( uint32_t *p_size ) result = COM_LIMIT; } /* erase user application area */ - FLASH_If_Erase(APPLICATION_ADDRESS); + FLASH_If_Erase(APP_ADDRESS); *p_size = filesize; Serial_PutByte(ACK);