diff --git a/CablePositioning_APP_V1.0/Core/Inc/RS485_debug.h b/CablePositioning_APP_V1.0/Core/Inc/RS485_debug.h
index 9a8fe8f..e8e2eb1 100644
--- a/CablePositioning_APP_V1.0/Core/Inc/RS485_debug.h
+++ b/CablePositioning_APP_V1.0/Core/Inc/RS485_debug.h
@@ -102,7 +102,6 @@ extern usart_buf_t debug_buf;
 /* Extern functions ----------------------------------------------------------*/
 extern void debug_start(void);
 extern int32_t debug_app_check(uint32_t addr, uint32_t size, uint8_t file_type);
-extern void _debug_pkt_adj_auto2(void);
 extern void debug_pkt_adj_defect(void);
 extern void debug_pkt_adj_fault(void);
 #endif
diff --git a/CablePositioning_APP_V1.0/Core/Src/RS485_debug.c b/CablePositioning_APP_V1.0/Core/Src/RS485_debug.c
index 0bbaa5c..e8b761a 100644
--- a/CablePositioning_APP_V1.0/Core/Src/RS485_debug.c
+++ b/CablePositioning_APP_V1.0/Core/Src/RS485_debug.c
@@ -654,110 +654,6 @@ static void _debug_pkt_config_set(void)
     return;
 }
 
-
-/* 校准参数获取报文处理. */
-static void _debug_pkt_adj_get(void)
-{
-    proto_head_t *head = (proto_head_t*)debug_buf.buf;
-    dev_adj_cfg_t *data = (dev_adj_cfg_t*)(debug_buf.buf + sizeof(proto_head_t));
-    uint32_t *crc = NULL;
-
-    /* 封装报文头. */
-    _debug_pkt_head_init(sizeof(proto_head_t) + sizeof(dev_adj_cfg_t), DEBUG_CT_PRV_REPLY);
-
-    /* 封装数据, 这里减 4 是因为结构体最后 4byte 位置特殊. */
-    memcpy(data->power_adj, dev_config.power_adj, 64);
-    data->vin_adj = dev_config.vin_adj;
-
-    /* 计算校验和. */
-    crc = (uint32_t*)(debug_buf.buf + head->len);
-    *crc = crc32(debug_buf.buf, head->len);
-
-    /* 发送报文 */
-    _debug_pkt_send(head->len + 4, head->len + 4);
-    
-    return;
-}
-
-/* 校准参数设置报文处理. */
-static void _debug_pkt_adj_set_power(void)
-{
-    proto_head_t *head = (proto_head_t*)debug_buf.buf;
-    dev_adj_power_cfg_t *data = (dev_adj_power_cfg_t*)(debug_buf.buf + sizeof(proto_head_t));
-    uint32_t *crc = NULL;
-
-    /* 配置参数. */
-    memcpy(dev_config.power_adj, data->power_adj, 32);
-    dev_config.vin_adj = data->vin_adj;
-
-    /* 封装报文头. */
-    _debug_pkt_head_init(sizeof(proto_head_t), DEBUG_CT_PRV_REPLY);
-
-    /* 计算校验和. */
-    crc = (uint32_t*)(debug_buf.buf + head->len);
-    *crc = crc32(debug_buf.buf, head->len);
-
-    /* 发送报文 */
-    _debug_pkt_send(head->len + 4, 20);
-
-    /* 保存参数. */
-    common_sys_set(COM_SYS_SAVE_CONFIG, 0);
-    
-    return;
-}
-
-/* 校准参数设置报文处理. */
-static void _debug_pkt_adj_set_defect(void)
-{
-    proto_head_t *head = (proto_head_t*)debug_buf.buf;
-    dev_adj_defect_cfg_t *data = (dev_adj_defect_cfg_t*)(debug_buf.buf + sizeof(proto_head_t));
-    uint32_t *crc = NULL;
-
-    /* 配置参数. */
-    memcpy(dev_config.defect_base, data->defect_base, sizeof(dev_adj_defect_cfg_t));
-
-    /* 封装报文头. */
-    _debug_pkt_head_init(sizeof(proto_head_t), DEBUG_CT_PRV_REPLY);
-
-    /* 计算校验和. */
-    crc = (uint32_t*)(debug_buf.buf + head->len);
-    *crc = crc32(debug_buf.buf, head->len);
-
-    /* 发送报文 */
-    _debug_pkt_send(head->len + 4, 20);
-
-    /* 保存参数. */
-    common_sys_set(COM_SYS_SAVE_CONFIG, 0);
-    
-    return;
-}
-
-/* 校准参数设置报文处理. */
-static void _debug_pkt_adj_set_fault(void)
-{
-    proto_head_t *head = (proto_head_t*)debug_buf.buf;
-    dev_adj_fault_cfg_t *data = (dev_adj_fault_cfg_t*)(debug_buf.buf + sizeof(proto_head_t));
-    uint32_t *crc = NULL;
-
-    /* 配置参数. */
-    memcpy(dev_config.fault_base, data->fault_base, sizeof(dev_adj_fault_cfg_t));
-
-    /* 封装报文头. */
-    _debug_pkt_head_init(sizeof(proto_head_t), DEBUG_CT_PRV_REPLY);
-
-    /* 计算校验和. */
-    crc = (uint32_t*)(debug_buf.buf + head->len);
-    *crc = crc32(debug_buf.buf, head->len);
-
-    /* 发送报文 */
-    _debug_pkt_send(head->len + 4, 20);
-
-    /* 保存参数. */
-    common_sys_set(COM_SYS_SAVE_CONFIG, 0);
-    
-    return;
-}
-
 /* 自动校准仪器通讯校验和计算. */
 static uint8_t _debug_adj_checksum(uint8_t *buf, uint8_t len)
 {
@@ -1020,7 +916,6 @@ void _debug_adj_power_cal(void)
     }
 }
 
-
 /* 自动校准处理. */
 static HAL_StatusTypeDef _debug_adj_auto(uint8_t bitmap)
 {
@@ -1048,6 +943,368 @@ static HAL_StatusTypeDef _debug_adj_auto(uint8_t bitmap)
     return HAL_OK;
 }
 
+/* 手动校准处理. */
+static HAL_StatusTypeDef _debug_adj_manual(uint8_t bitmap)
+{
+    if (!bitmap)
+    {
+        return HAL_OK;
+    }
+
+    dau_adj_state = DAU_ADJ_STATE_POWER;
+    while (dau_adj_state != DAU_ADJ_STATE_NONE)
+    {
+        common_watchdog_set(COM_WDG_CLI);
+        osDelay(1000);
+    }
+    DBG(DBG_M_RS485_DEBUG, "capture end...\r\n");
+    _debug_adj_power_cal();
+    return HAL_OK;
+}
+
+
+/* 校准参数获取报文处理. */
+static void _debug_pkt_adj_get(void)
+{
+    proto_head_t *head = (proto_head_t*)debug_buf.buf;
+    dev_adj_cfg_t *data = (dev_adj_cfg_t*)(debug_buf.buf + sizeof(proto_head_t));
+    uint32_t *crc = NULL;
+
+    /* 封装报文头. */
+    _debug_pkt_head_init(sizeof(proto_head_t) + sizeof(dev_adj_cfg_t), DEBUG_CT_PRV_REPLY);
+
+    /* 封装数据, 这里减 4 是因为结构体最后 4byte 位置特殊. */
+    memcpy(data->power_adj, dev_config.power_adj, 64);
+    data->vin_adj = dev_config.vin_adj;
+
+    /* 计算校验和. */
+    crc = (uint32_t*)(debug_buf.buf + head->len);
+    *crc = crc32(debug_buf.buf, head->len);
+
+    /* 发送报文 */
+    _debug_pkt_send(head->len + 4, head->len + 4);
+    
+    return;
+}
+
+/* 校准参数设置报文处理. */
+static void _debug_pkt_adj_set_power(void)
+{
+    proto_head_t *head = (proto_head_t*)debug_buf.buf;
+    dev_adj_power_cfg_t *data = (dev_adj_power_cfg_t*)(debug_buf.buf + sizeof(proto_head_t));
+    uint32_t *crc = NULL;
+
+    /* 配置参数. */
+    memcpy(dev_config.power_adj, data->power_adj, 32);
+    dev_config.vin_adj = data->vin_adj;
+
+    /* 封装报文头. */
+    _debug_pkt_head_init(sizeof(proto_head_t), DEBUG_CT_PRV_REPLY);
+
+    /* 计算校验和. */
+    crc = (uint32_t*)(debug_buf.buf + head->len);
+    *crc = crc32(debug_buf.buf, head->len);
+
+    /* 发送报文 */
+    _debug_pkt_send(head->len + 4, 20);
+
+    /* 保存参数. */
+    common_sys_set(COM_SYS_SAVE_CONFIG, 0);
+    
+    return;
+}
+
+/* 校准参数设置报文处理. */
+static void _debug_pkt_adj_set_defect(void)
+{
+    proto_head_t *head = (proto_head_t*)debug_buf.buf;
+    dev_adj_defect_cfg_t *data = (dev_adj_defect_cfg_t*)(debug_buf.buf + sizeof(proto_head_t));
+    uint32_t *crc = NULL;
+
+    /* 配置参数. */
+    memcpy(dev_config.defect_base, data->defect_base, sizeof(dev_adj_defect_cfg_t));
+
+    /* 封装报文头. */
+    _debug_pkt_head_init(sizeof(proto_head_t), DEBUG_CT_PRV_REPLY);
+
+    /* 计算校验和. */
+    crc = (uint32_t*)(debug_buf.buf + head->len);
+    *crc = crc32(debug_buf.buf, head->len);
+
+    /* 发送报文 */
+    _debug_pkt_send(head->len + 4, 20);
+
+    /* 保存参数. */
+    common_sys_set(COM_SYS_SAVE_CONFIG, 0);
+    
+    return;
+}
+
+/* 校准参数设置报文处理. */
+static void _debug_pkt_adj_set_fault(void)
+{
+    proto_head_t *head = (proto_head_t*)debug_buf.buf;
+    dev_adj_fault_cfg_t *data = (dev_adj_fault_cfg_t*)(debug_buf.buf + sizeof(proto_head_t));
+    uint32_t *crc = NULL;
+
+    /* 配置参数. */
+    memcpy(dev_config.fault_base, data->fault_base, sizeof(dev_adj_fault_cfg_t));
+
+    /* 封装报文头. */
+    _debug_pkt_head_init(sizeof(proto_head_t), DEBUG_CT_PRV_REPLY);
+
+    /* 计算校验和. */
+    crc = (uint32_t*)(debug_buf.buf + head->len);
+    *crc = crc32(debug_buf.buf, head->len);
+
+    /* 发送报文 */
+    _debug_pkt_send(head->len + 4, 20);
+
+    /* 保存参数. */
+    common_sys_set(COM_SYS_SAVE_CONFIG, 0);
+    
+    return;
+}
+
+/* 设备状态获取报文处理. */
+static void _debug_pkt_adj_defect_zero(void)
+{
+    proto_head_t *head = (proto_head_t*)debug_buf.buf;
+    dev_adj_defect_zero_t *data = (dev_adj_defect_zero_t*)(debug_buf.buf + sizeof(proto_head_t));
+    uint32_t *crc = NULL;
+    uint8_t i = 0;
+
+    /* 解析数据. */
+    memcpy(&debug_adj_defect, data, sizeof(dev_adj_defect_zero_t));
+
+    dau_adj_state = DAU_ADJ_STATE_DEFECT_ZERO;
+    while(dau_adj_state != DAU_ADJ_STATE_NONE)
+    {
+        osDelay(1000);
+        common_watchdog_set(COM_WDG_CLI);
+    }
+
+    for(i = 0; i < DAU_PORT_DEFECT_CNT; i++)
+    {
+        if (!IS_MONITOR_BIT_SET(debug_adj_defect.bitmap, i))
+        {
+            continue;
+        }
+
+        dev_config.defect_base[i] = dau_ctrl.reg_port_state.DAVR[i];
+    }
+
+    /* 封装报文头. */
+    _debug_pkt_head_init(sizeof(proto_head_t), DEBUG_CT_PRV_REPLY);
+
+    /* 计算校验和. */
+    crc = (uint32_t*)(debug_buf.buf + head->len);
+    *crc = crc32(debug_buf.buf, head->len);
+
+    /* 发送报文 */
+    _debug_pkt_send(head->len + 4, 20);
+    
+    return;
+}
+
+/* 设备状态获取报文处理. */
+static void _debug_pkt_adj_defect(void)
+{
+    proto_head_t *head = (proto_head_t*)debug_buf.buf;
+    dev_adj_defect_cfg_t *data = (dev_adj_defect_cfg_t*)(debug_buf.buf + sizeof(proto_head_t));
+    uint32_t *crc = NULL;
+    uint32_t temp = 0;
+    uint8_t i = 0;
+
+    dau_adj_state = DAU_ADJ_STATE_DEFECT;
+    while(dau_adj_state != DAU_ADJ_STATE_NONE)
+    {
+        osDelay(1000);
+        common_watchdog_set(COM_WDG_CLI);
+    }
+    
+    for(i = 0; i < DAU_PORT_DEFECT_CNT; i++)
+    {
+        if (!IS_MONITOR_BIT_SET(debug_adj_defect.bitmap, i))
+        {
+            continue;
+        }
+        temp = dau_ctrl.reg_port_state.DAVR[i] - dev_config.defect_base[i];
+        //temp = 3276;
+        dev_config.defect_adj[i] = debug_adj_defect.defect_elec * 32768 / temp;
+    }
+
+    /* 封装报文头. */
+    _debug_pkt_head_init(sizeof(proto_head_t) + sizeof(dev_adj_defect_cfg_t), DEBUG_CT_PRV_REPLY);
+
+    /* 配置参数. */
+    memcpy(data->defect_base, dev_config.defect_base, sizeof(dev_adj_defect_cfg_t));
+    
+
+    /* 计算校验和. */
+    crc = (uint32_t*)(debug_buf.buf + head->len);
+    *crc = crc32(debug_buf.buf, head->len);
+
+    /* 发送报文 */
+    _debug_pkt_send(head->len + 4, 20);
+
+    /* 保存参数. */
+    common_sys_set(COM_SYS_SAVE_CONFIG, 0);
+    
+    return;
+}
+
+/* 设备状态获取报文处理. */
+static void _debug_pkt_adj_fault_zero(void)
+{
+    proto_head_t *head = (proto_head_t*)debug_buf.buf;
+    dev_adj_fault_zero_t *data = (dev_adj_fault_zero_t*)(debug_buf.buf + sizeof(proto_head_t));
+    uint32_t *crc = NULL;
+
+    /* 解析数据. */
+    memcpy(&debug_adj_fault, data, sizeof(dev_adj_fault_zero_t));
+
+    dau_adj_state = DAU_ADJ_STATE_FAULT_ZERO;
+    while(dau_adj_state != DAU_ADJ_STATE_NONE)
+    {
+        osDelay(1000);
+        common_watchdog_set(COM_WDG_CLI);
+    }
+
+    /* 封装报文头. */
+    _debug_pkt_head_init(sizeof(proto_head_t), DEBUG_CT_PRV_REPLY);
+
+    /* 计算校验和. */
+    crc = (uint32_t*)(debug_buf.buf + head->len);
+    *crc = crc32(debug_buf.buf, head->len);
+
+    /* 发送报文 */
+    _debug_pkt_send(head->len + 4, 20);
+    
+    return;
+}
+
+/* 设备状态获取报文处理. */
+static void _debug_pkt_adj_fault(void)
+{
+    proto_head_t *head = (proto_head_t*)debug_buf.buf;
+    dev_adj_fault_cfg_t *data = (dev_adj_fault_cfg_t*)(debug_buf.buf + sizeof(proto_head_t));
+    uint32_t *crc = NULL;
+    uint8_t i = 0;
+
+    dau_adj_state = DAU_ADJ_STATE_FAULT;
+    while(dau_adj_state != DAU_ADJ_STATE_NONE)
+    {
+        osDelay(1000);
+        common_watchdog_set(COM_WDG_CLI);
+    }
+    
+    for(i = 0; i < DAU_PORT_FAULT_CNT; i++)
+    {
+        data->fault_base[i] = dev_config.fault_base[i];
+
+        if (!IS_MONITOR_BIT_SET(debug_adj_fault.bitmap, i))
+        {
+            data->fault_adj[i] = dev_config.fault_adj[i];
+            continue;
+        }
+
+        if (!((dau_ctrl.reg_global.GFTR & DAU_GFTR_FAULT_Msk) >> DAU_GFTR_FAULT_Pos))
+        {
+            data->fault_adj[i] = 0;
+            continue;
+        }
+
+        //data->fault_adj[i] = abs_cal_u(dau_ctrl.reg_port_state.FMAX[i] - dev_config.fault_base[i]);
+        data->fault_adj[i] = 13107;
+    }
+
+    /* 封装报文头. */
+    _debug_pkt_head_init(sizeof(proto_head_t) + sizeof(dev_adj_fault_cfg_t), DEBUG_CT_PRV_REPLY);
+
+    /* 计算校验和. */
+    crc = (uint32_t*)(debug_buf.buf + head->len);
+    *crc = crc32(debug_buf.buf, head->len);
+
+    /* 发送报文 */
+    _debug_pkt_send(head->len + 4, 20);
+    
+    return;
+}
+
+/* 手动校准报文处理. */
+static void _debug_pkt_adj_manual(void)
+{
+    proto_head_t *head = (proto_head_t*)debug_buf.buf;
+    dev_adj_power_t *data = (dev_adj_power_t*)(debug_buf.buf + sizeof(proto_head_t));
+    dev_adj_power_cfg_t *cfg = (dev_adj_power_cfg_t*)(debug_buf.buf + sizeof(proto_head_t));
+    uint32_t *crc = NULL;
+
+    /* 解析数据. */
+    memcpy(&debug_adj_power, data, sizeof(dev_adj_power_t));
+
+    /* 组装数据 */
+    cfg->return_value = _debug_adj_manual(debug_adj_power.bitmap);
+    if (debug_adj_power.is_voltage_adj)
+    {
+        ADC_vbat_auto(5000);
+    }
+    memcpy(cfg->power_adj, dev_config.power_adj, 32);
+    //memcpy(cfg->power_adj_point, dev_config.power_adj_point, 32);
+    cfg->vin_adj = dev_config.vin_adj;
+
+    /* 封装报文头. */
+    _debug_pkt_head_init(sizeof(proto_head_t) + sizeof(dev_adj_power_cfg_t), DEBUG_CT_PRV_REPLY);
+
+    /* 计算校验和. */
+    crc = (uint32_t*)(debug_buf.buf + head->len);
+    *crc = crc32(debug_buf.buf, head->len);
+
+    /* 发送报文 */
+    _debug_pkt_send(head->len + 4, 20);
+
+    /* 保存参数. */
+    common_sys_set(COM_SYS_SAVE_CONFIG, 0);
+    
+    return;
+}
+
+/* 自动校准报文处理. */
+void _debug_pkt_adj_auto(void)
+{
+    proto_head_t *head = (proto_head_t*)debug_buf.buf;
+    dev_adj_power_t *data = (dev_adj_power_t*)(debug_buf.buf + sizeof(proto_head_t));
+    dev_adj_power_cfg_t *cfg = (dev_adj_power_cfg_t*)(debug_buf.buf + sizeof(proto_head_t));
+    uint32_t *crc = NULL;
+
+    /* 解析数据. */
+    memcpy(&debug_adj_power, data, sizeof(dev_adj_power_t));
+
+    /* 组装数据 */
+    cfg->return_value = _debug_adj_auto(debug_adj_power.bitmap);
+    if (debug_adj_power.is_voltage_adj)
+    {
+        ADC_vbat_auto(5000);
+    }
+    memcpy(cfg->power_adj, dev_config.power_adj, 32);
+    cfg->vin_adj = dev_config.vin_adj;
+
+    /* 封装报文头. */
+    _debug_pkt_head_init(sizeof(proto_head_t) + sizeof(dev_adj_power_cfg_t), DEBUG_CT_PRV_REPLY);
+
+    /* 计算校验和. */
+    crc = (uint32_t*)(debug_buf.buf + head->len);
+    *crc = crc32(debug_buf.buf, head->len);
+
+    /* 发送报文 */
+    _debug_pkt_send(head->len + 4, 20);
+
+    /* 保存参数. */
+    common_sys_set(COM_SYS_SAVE_CONFIG, 0);
+    
+    return;
+}
+
 /* 实时数据获取报文处理. */
 static void _debug_pkt_data_get(void)
 {
diff --git a/CablePositioning_APP_V1.0/Core/Src/cli.c b/CablePositioning_APP_V1.0/Core/Src/cli.c
index 1191ad4..d8c7206 100644
--- a/CablePositioning_APP_V1.0/Core/Src/cli.c
+++ b/CablePositioning_APP_V1.0/Core/Src/cli.c
@@ -120,7 +120,6 @@ static BaseType_t _cli_save(const char *string);
 static BaseType_t _cli_show(const char *string);
 static BaseType_t _cli_spi(const char *string);
 static BaseType_t _cli_work_mode(const char *string);
-static BaseType_t _cli_debug_msg(const char *string);
 
 #if LD_DEBUG
 static BaseType_t _cli_debug(const char *string);
@@ -146,7 +145,6 @@ static const CLI_Command_Definition_t cmd_save      = {"save", _cli_save, 1};
 static const CLI_Command_Definition_t cmd_show      = {"show", _cli_show, 2};
 static const CLI_Command_Definition_t cmd_test      = {"spi", _cli_spi, 3};
 static const CLI_Command_Definition_t cmd_work_mode = {"work-mode", _cli_work_mode, 1};
-static const CLI_Command_Definition_t cmd_debug_msg = {"msg", _cli_debug_msg, 1};
 
 /* Internal functions --------------------------------------------------------*/
 /* cli获取互斥锁. */
@@ -629,8 +627,6 @@ static BaseType_t _cli_debug_msg(const char *string)
     return pdFALSE;
 }
 
-
-
 /* 工作模式配置命令. */
 static BaseType_t _cli_work_mode(const char *string)
 {
@@ -802,7 +798,6 @@ static void _cli_start(void)
     FreeRTOS_CLIRegisterCommand(&cmd_show, CLI_NODE_COMMON);
     FreeRTOS_CLIRegisterCommand(&cmd_test, CLI_NODE_COMMON);
     FreeRTOS_CLIRegisterCommand(&cmd_work_mode, CLI_NODE_CONFIG);
-    FreeRTOS_CLIRegisterCommand(&cmd_debug_msg, CLI_NODE_CONFIG);
 
     for(;;)
     {